[emacs] update packages
[~bandali/configs] / rc.org
... / ...
CommitLineData
1#+title: rc.org
2#+property: header-args :comments link :mkdirp yes :results silent
3
4* About
5
6This org file contains the configuration files of pretty much every
7program I use. The files are tangled (i.e. exported, or derived) from
8this file using =org-babel=.
9
10Note: This file is best viewed inside Emacs with org mode.
11
12* Configs
13
14This section contains the configuration files (dotfiles) of various
15programs I use.
16
17** compton
18:PROPERTIES:
19:header-args+: :tangle ~/.config/compton.conf
20:END:
21
22#+begin_src conf :tangle no
23# Shadow
24shadow = false; # Enabled client-side shadows on windows.
25no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows.
26no-dnd-shadow = true; # Don't draw shadows on DND windows.
27clear-shadow = true; # Zero the part of the shadow's mask behind the
28 # window. Fix some weirdness with ARGB windows.
29shadow-radius = 5; # The blur radius for shadows. (default 12)
30shadow-offset-x = -5; # The left offset for shadows. (default -15)
31shadow-offset-y = -5; # The top offset for shadows. (default -15)
32# shadow-opacity = 0.7; # The translucency for shadows. (default .75)
33# shadow-red = 0.0; # Red color value of shadow. (0.0 - 1.0, defaults to 0)
34# shadow-green = 0.0; # Green color value of shadow. (0.0 - 1.0, defaults to 0)
35# shadow-blue = 0.0; # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
36shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ]; # Exclude conditions for shadows.
37# shadow-exclude = "n:e:Notification";
38#shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
39shadow-ignore-shaped = true; # Avoid drawing shadow on all shaped windows
40 # (see also: --detect-rounded-corners)
41
42# Opacity
43menu-opacity = 1.0; # The opacity for menus. (default 1.0)
44#inactive-opacity = 0.9; # Default opacity of inactive windows. (0.0 - 1.0)
45# active-opacity = 0.8; # Default opacity for active windows. (0.0 - 1.0)
46frame-opacity = 1.0; # Opacity of window titlebars and borders. (0.1 - 1.0)
47# inactive-opacity-override = true; # Let inactive opacity set by 'inactive-opacity' overrides
48 # value of _NET_WM_OPACITY. Bad choice.
49alpha-step = 0.06; # XRender backend: Step size for alpha pictures. Increasing
50 # it may result in less X resource usage,
51 # Yet fading may look bad.
52#inactive-dim = 0.5; # Dim inactive windows. (0.0 - 1.0)
53#inactive-dim-fixed = true; # Do not let dimness adjust based on window opacity.
54# blur-background = true; # Blur background of transparent windows.
55 # Bad performance with X Render backend.
56 # GLX backend is preferred.
57# blur-background-frame = true; # Blur background of opaque windows with transparent
58 # frames as well.
59blur-background-fixed = true; # Do not let blur radius adjust based on window opacity.
60blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
61 # Exclude conditions for background blur.
62
63# Fading
64fading = false; # Fade windows during opacity changes.
65fade-delta = 3; # The time between steps in a fade in milliseconds. (default 10).
66fade-in-step = 0.03; # Opacity change between steps while fading in. (default 0.028).
67fade-out-step = 0.03; # Opacity change between steps while fading out. (default 0.03).
68# no-fading-openclose = true; # Avoid fade windows in/out when opening/closing.
69fade-exclude = [ ]; # Exclude conditions for fading.
70
71# Other
72backend = "glx" # Backend to use: "xrender" or "glx". GLX backend is typically
73 # much faster but depends on a sane driver.
74mark-wmwin-focused = true; # Try to detect WM windows and mark them as active.
75mark-ovredir-focused = true; # Mark all non-WM but override-redirect windows active (e.g. menus).
76use-ewmh-active-win = true; # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
77 # instead of using FocusIn/Out events. Usually more reliable but
78 # depends on a EWMH-compliant WM.
79detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
80detect-client-opacity = true; # Detect _NET_WM_OPACITY on client windows, useful for window
81 # managers not passing _NET_WM_OPACITY of client windows to frame
82 # windows.
83refresh-rate = 0; # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
84vsync = "drm"; # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
85 # See man page for more details.
86dbe = false; # Enable DBE painting mode. Rarely needed.
87paint-on-overlay = true; # Painting on X Composite overlay window. Recommended.
88sw-opti = false; # Limit compton to repaint at most once every 1 / refresh_rate.
89 # Incompatible with certain VSync methods.
90unredir-if-possible = false; # Unredirect all windows if a full-screen opaque window is
91 # detected, to maximize performance for full-screen windows.
92focus-exclude = [ ]; # A list of conditions of windows that should always be considered
93 # focused.
94detect-transient = true; # Use WM_TRANSIENT_FOR to group windows, and consider windows in
95 # the same group focused at the same time.
96detect-client-leader = true; # Use WM_CLIENT_LEADER to group windows.
97invert-color-include = [ ]; # Conditions for windows to be painted with inverted color.
98
99# GLX backend # GLX backend fine-tune options. See man page for more info.
100glx-no-stencil = true; # Recommended.
101glx-copy-from-front = false; # Useful with --glx-swap-method,
102# glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
103# glx-no-rebind-pixmap = true; # Recommended if it works.
104glx-no-rebind-pixmap = true; # Recommended if it works.
105#glx-swap-method = "4"; # See man page.
106glx-swap-method = "4"; # See man page.
107
108# Window type settings
109wintypes:
110{
111 tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
112 menu = { shadow = false; };
113 dropdown_menu = { shadow = false; };
114 popup_menu = { shadow = false; };
115 utility = { shadow = false; };
116 # fade: Fade the particular type of windows.
117 # shadow: Give those windows shadow
118 # opacity: Default opacity for the type of windows.
119 # focus: Whether to always consider windows of this type focused.
120};
121#+end_src
122
123** dovecot
124:PROPERTIES:
125:header-args+: :tangle "/sudo::/etc/dovecot/dovecot.conf"
126:END:
127
128#+begin_src conf
129protocols = imap
130
131listen = 127.0.0.1
132log_path = /var/log/dovecot.log
133info_log_path = /var/log/dovecot-info.log
134
135ssl = no
136disable_plaintext_auth = no
137
138auth_verbose = yes
139auth_mechanisms = plain
140
141passdb {
142 driver = passwd-file
143 args = /etc/dovecot/passwd
144}
145
146userdb {
147 driver = static
148 args = uid=amin gid=amin home=/home/amin/mail/%d/%n
149 default_fields = mail=maildir:/home/amin/mail/%d/%n/mail
150}
151
152# mail_home = /home/amin/mail/%d/%n
153# mail_location = maildir:/home/amin/mail/%d/%n/mail:LAYOUT=fs:INBOX=/home/amin/mail/%d/%n/mail/Inbox
154
155# namespace {
156# inbox = yes
157# separator = /
158# }
159
160mail_plugins = $mail_plugins fts fts_lucene
161
162plugin {
163 fts = lucene
164 fts_lucene = whitespace_chars=@.
165 fts_autoindex = yes
166}
167#+end_src
168
169** Dunst
170:PROPERTIES:
171:header-args+: :tangle ~/.config/dunst/dunstrc
172:END:
173
174#+begin_src conf
175[global]
176#font = Ubuntu Mono 10.5
177font = Inconsolata 11
178
179# Path to default icons.
180icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
181
182icon_position = left
183# <b>bold</b>
184# <i>italic</i>
185# <s>strikethrough<s/>
186# <u>underline</u>
187markup = full
188# The format of the message. Possible variables are:
189# %a appname
190# %s summary
191# %b body
192# %i iconname (including its path)
193# %I iconname (without its path)
194# %p progress value if set ([ 0%] to [100%]) or nothing
195# Markup is allowed
196format = "<b>%s</b>\n%b"
197# Sort messages by urgency
198sort = yes
199# Show how many messages are currently hidden (because of geometry)
200indicate_hiddenl= no
201# Alignment of message text.
202# Possible values are "left", "center" and "right"
203alignment = center
204# The frequency with wich text that is longer than the notification
205# window allows bounces back and forth.
206# This option conflicts with 'word_wrap'.
207# Set to 0 to disable
208bounce_freq = 3
209# show age of message if message is older than show_age_threshold seconds.
210# set to -1 to disable
211show_age_threshold = -1
212# split notifications into multiple lines if they don't fit into geometry
213word_wrap = yes
214# ignore newlines '\n' in notifications
215ignore_newline = no
216# The geometry of the message window.
217# geometry [{width}]x{height}][+/-{x}+/-{y}]
218# The height is measured in number of notifications everything else in pixels. If the width
219# is omitted but the height is given ("-geometry x2"), the message window
220# expands over the whole screen (dmenu-like). If width is 0,
221# the window expands to the longest message displayed.
222# A positive x is measured from the left, a negative from the
223# right side of the screen. Y is measured from the top and down respectevly.
224# The width can be negative. In this case the actual width is the
225# screen width minus the width defined in within the geometry option.
226#geometry = "410x12-12+12"
227#geometry = "0x0-30-30"
228geometry = "260x12-30-30"
229# The transparency of the window. range: [0; 100]
230# This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
231transparency = 0
232# Don't remove messages, if the user is idle (no mouse or keyboard input)
233# for longer than idle_threshold seconds.
234# Set to 0 to disable.
235idle_threshold = 120
236# Which monitor should the notifications be displayed on.
237monitor = 0
238# Display notification on focused monitor. Possible modes are:
239# mouse: follow mouse pointer
240# keyboard: follow window with keyboard focus
241# none: don't follow anything
242#
243# "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
244# This should be the case for almost all modern windowmanagers.
245#
246# If this option is set to mouse or keyboard, the monitor option will be
247# ignored.
248follow = keyboard
249# should a notification popped up from history be sticky or
250# timeout as if it would normally do.
251sticky_history = yes
252# The height of a single line. If the height is smaller than the font height,
253# it will get raised to the font height.
254# This adds empty space above and under the text.
255line_height = 0
256
257show_indicators = yes
258
259# Draw a line of 'separatpr_height' pixel height between two notifications.
260# Set to 0 to disable
261separator_height = 3
262# padding between text and separator
263padding = 8
264# horizontal padding
265horizontal_padding = 8
266# Define a color for the separator.
267# possible values are:
268# * auto: dunst tries to find a color fitting to the background
269# * foreground: use the same color as the foreground
270# * frame: use the same color as the frame.
271# * anything else will be interpreted as a X color
272separator_color = foreground
273# print a notification on startup
274# This is mainly for error detection, since dbus (re-)starts dunst
275# automatically after a crash.
276startup_notification = false
277# dmenu path
278#dmenu = /usr/bin/dmenu -p dunst:
279dmenu = /usr/bin/rofi -dmenu -p dunst:
280# browser for opening urls in context menu
281browser = /usr/bin/firefox -new-tab
282[frame]
283width = 0
284color = "#377222"
285[shortcuts]
286# shortcuts are specified as [modifier+][modifier+]...key
287# available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
288# and 'mod4' (windows-key)
289# xev might be helpful to find names for keys
290# close notification
291close = ctrl+space
292# close all notifications
293close_all = ctrl+shift+space
294# redisplay last message(s)
295# On the US keyboard layout 'grave' is normally above TAB and left of '1'.
296history = ctrl+shift+h
297# context menu
298context = ctrl+shift+period
299[urgency_low]
300# IMPORTANT: colors have to be defined in quotation marks.
301# Otherwise the '#' and following would be interpreted as a comment.
302background = "#1d2a30"
303foreground = "#71c2af"
304timeout = 3
305[urgency_normal]
306background = "#1d2a30"
307foreground = "#71c2af"
308timeout = 0
309[urgency_critical]
310background = "#1d2a30"
311foreground = "#ff9982"
312timeout = 0
313
314# Every section that isn't one of the above is interpreted as a rules
315# to override settings for certain messages.
316# Messages can be matched by 'appname', 'summary', 'body' or 'icon'
317# and you can override the 'timeout', 'urgency', 'foreground', 'background'
318# and 'format'.
319# Shell-like globbing will get expanded.
320#
321# SCRIPTING
322# you can specify a script that gets run when the rule matches by setting
323# the 'script' option.
324# The script will be called as follows:
325# script appname summary body icon urgency
326# where urgency can be "LOW", "NORMAL" or "CRITICAL".
327#
328# NOTE: if you don't want a notification to be displayed, set the format to ""
329# NOTE: It might be helpful to run dunst -print in a terminal in order to find
330# fitting options for rules.
331#[espeak]
332# summary = "*"
333# script = dunst_espeak.sh
334#[script-test]
335# summary = "*script*"
336# script = dunst_test.sh
337#[ignore]
338## This notification will not be displayed
339# summary = "foobar"
340# format = ""
341#[signed_on]
342# appname = Pidgin
343# summary = "*signed on*"
344# urgency = low
345#
346#[signed_off]
347# appname = Pidgin
348# summary = *signed off*
349# urgency = low
350#
351#[says]
352# appname = Pidgin
353# summary = *says*
354# urgency = critical
355#
356#[twitter]
357# appname = Pidgin
358# summary = *twitter.com*
359# urgency = normal
360#
361[xfpm-backlight]
362 summary = *Brightness*
363 urgency = low
364#+end_src
365
366** Fontconfig
367:PROPERTIES:
368:header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
369:END:
370
371#+begin_src xml
372<?xml version="1.0"?>
373<!DOCTYPE fontconfig SYSTEM "fonts.dtd">
374<fontconfig>
375 <match target="font">
376 <edit mode="assign" name="rgba">
377 <const>rgb</const>
378 </edit>
379 </match>
380 <match target="font">
381 <edit mode="assign" name="hinting">
382 <bool>true</bool>
383 </edit>
384 </match>
385 <match target="font">
386 <edit mode="assign" name="hintstyle">
387 <const>hintslight</const>
388 </edit>
389 </match>
390 <match target="font">
391 <edit mode="assign" name="antialias">
392 <bool>true</bool>
393 </edit>
394 </match>
395 <match target="font">
396 <edit mode="assign" name="lcdfilter">
397 <const>lcddefault</const>
398 </edit>
399 </match>
400 <dir>~/.fonts</dir>
401
402 <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
403 <alias binding="same">
404 <family>Helvetica</family>
405 <prefer>
406 <family>Liberation Sans</family>
407 </prefer>
408</alias>
409</fontconfig>
410#+end_src
411
412** getmail
413
414*** getmailrc
415:PROPERTIES:
416:header-args+: :tangle ~/.getmail/getmailrc
417:END:
418
419#+begin_src conf
420[retriever]
421type = SimplePOP3SSLRetriever
422server = fencepost.gnu.org
423username = bandali
424password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
425port = 995
426use_apop = True
427
428[destination]
429type = Maildir
430path = ~/mail/gnu/Inbox/
431
432# [destination]
433# type = MDA_external
434# path = /usr/lib/dovecot/deliver
435# arguments = ('-d', 'amin@aminb.org')
436
437[options]
438delete = True
439#+end_src
440
441*** getmail.service
442:PROPERTIES:
443:header-args+: :tangle ~/.config/systemd/user/getmail.service
444:END:
445
446#+begin_src conf :tangle no
447[Unit]
448Description=getmail service
449
450[Service]
451Type=oneshot
452ExecStart=/usr/bin/getmail
453StandardOutput=syslog
454StandardError=syslog
455#+end_src
456
457*** getmail.timer
458:PROPERTIES:
459:header-args+: :tangle ~/.config/systemd/user/getmail.timer
460:END:
461
462#+begin_src conf :tangle no
463[Unit]
464Description=getmail timer
465
466[Timer]
467OnCalendar=*:0/30
468Persistent=true
469Unit=getmail.service
470
471[Install]
472WantedBy=timers.target
473#+end_src
474
475** Git
476
477*** gitconfig
478:PROPERTIES:
479:header-args+: :tangle ~/.gitconfig
480:END:
481
482**** user
483#+begin_src conf
484[user]
485 name = Amin Bandali
486 email = bandali@gnu.org
487 signingkey = BE6273738E616D6D1B3A08E8A21A020248816103
488#+end_src
489
490**** signing
491#+begin_src conf
492[commit]
493 gpgsign = true
494# [format]
495# signoff = true
496#+end_src
497
498**** core
499#+begin_src conf
500[core]
501 autocrlf = input # CRLF -> LF on commit
502 editor = emacsclient -t
503 excludesfile = ~/.gitignore_global
504 pager = "less"
505#+end_src
506
507**** gpg
508#+begin_src conf
509[gpg]
510 program = gpg2
511#+end_src
512
513**** alias
514#+begin_src conf
515[alias]
516 git = !exec git # handle nested git calls, e.g. git git status
517 aliases = config --get-regexp '^alias\\.'
518 a = add
519 s = status
520 sl = status --long
521 c = checkout
522 cb = checkout -b
523 b = branch
524 r = rebase
525 p = pull
526 pr = pull --rebase
527 ps = push
528 psf = push --force
529 nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f"
530 nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f"
531#+end_src
532
533**** color
534#+begin_src conf
535[color]
536 ui = auto
537[color "status"]
538 added = green bold
539 changed = red bold
540 untracked = red bold
541[color "branch"]
542 current = green bold
543 remote = magenta bold
544[color "diff"]
545 new = green bold
546 old = red bold
547#+end_src
548
549**** status
550#+begin_src conf
551[status]
552 # showUntrackedFiles = all
553 short=true
554 branch=true
555#+end_src
556
557**** github
558#+begin_src conf
559[github]
560 user = aminb
561#+end_src
562
563**** send-email
564#+begin_src conf
565[sendemail]
566 smtpuser = bandali
567 smtpserver = fencepost.gnu.org
568 smtpserverport = 587
569 smtpencryption = tls
570 annotate = yes
571#+end_src
572
573*** gitignore
574:PROPERTIES:
575:header-args+: :tangle ~/.gitignore_global
576:END:
577
578#+begin_src conf
579*.orig
580*.py[co]
581*.sublime-workspace
582*~
583.DS_Store
584*.elc
585*-autoloads.el
586#+end_src
587
588** GnuPG
589:PROPERTIES:
590:header-args+: :tangle ~/.gnupg/gpg-agent.conf
591:END:
592
593#+begin_src conf
594default-cache-ttl 43200
595max-cache-ttl 43200
596
597default-cache-ttl-ssh 10800
598max-cache-ttl-ssh 10800
599
600# pinentry-program /usr/bin/pinentry-qt
601#+end_src
602
603** GTK
604
605*** gtk-2.0
606:PROPERTIES:
607:header-args+: :tangle ~/.gtkrc-2.0
608:END:
609
610#+begin_src conf
611gtk-theme-name="Greybird"
612gtk-icon-theme-name="Paper"
613gtk-font-name="Ubuntu 10"
614gtk-menu-images=0
615# gtk-key-theme-name = "Emacs"
616#+end_src
617
618*** gtk-3.0
619:PROPERTIES:
620:header-args+: :tangle ~/.config/gtk-3.0/settings.ini
621:END:
622
623#+begin_src conf :tangle no
624[Settings]
625gtk-icon-theme-name = Paper
626# gtk-theme-name = Adwaita
627
628gtk-theme-name = Greybird
629# gtk-theme-name = Arc-Darker
630# gtk-theme-name = Numix-ArchBlue
631
632gtk-font-name = Ubuntu 10
633# gtk-key-theme-name = Emacs
634#+end_src
635
636** [[https://github.com/Leinnan/i3gs][i3gs]]
637:PROPERTIES:
638:header-args+: :tangle ~/.config/i3gs/config
639:END:
640
641#+begin_src conf :comments none :tangle no
642borders_width=0 0 2 0
643separator_width=10
644
645#[mpd]
646#preset=MPD
647#title=<span weight='heavy' fgcolor='#7FDBFF'> </span>
648#borders_color=#7FDBFF
649
650[ram]
651preset=RAM
652title=<span weight='heavy' fgcolor='#3D9970'> </span>
653borders_color=#3D9970
654
655#[cpu]
656#preset=CPU
657#title=<span weight='heavy' fgcolor='#2ECC40'> </span>
658#borders_color=#2ECC40
659
660#[hdd]
661#preset=HDD
662#title=<span weight='heavy' fgcolor='#01FF70'> </span>
663#borders_color=#01FF70
664
665[volume]
666command=volume-info
667title=<span weight='heavy' fgcolor='#7FDBFF'></span>
668borders_color=#7FDBFF
669
670[battery]
671preset=BAT
672command=battery-percentage-time
673title=<span weight='heavy' fgcolor='#39CCCC'> </span>
674borders_color=#39CCCC
675
676[wifi]
677preset=WIFI
678title=<span weight='heavy' fgcolor='#01FF70'> </span>
679borders_color=#01FF70
680
681[date]
682preset=DATE
683command=date '+%-I:%M, %a %b %d '
684title=<span weight='heavy' fgcolor='#FFDC00'> </span>
685borders_color=#FFDC00
686separator_width=0
687#+end_src
688
689** i3status
690:PROPERTIES:
691:header-args+: :tangle ~/.config/i3status/config
692:END:
693
694#+begin_src conf :comments none
695# i3status configuration file.
696# see "man i3status" for documentation.
697
698# It is important that this file is edited as UTF-8.
699# The following line should contain a sharp s:
700# ß
701# If the above line is not correctly displayed, fix your editor first!
702
703general {
704 colors = true
705 interval = 5
706 output_format = "i3bar"
707}
708
709# order += "ipv6"
710order += "disk /"
711order += "disk /data"
712# order += "wireless _first_"
713order += "ethernet _first_"
714order += "battery 0"
715order += "volume master"
716order += "load"
717order += "tztime local"
718
719wireless _first_ {
720 format_up = "W:%quality %essid %ip"
721 format_down = "W: down"
722}
723
724ethernet _first_ {
725 # if you use %speed, i3status requires root privileges
726 format_up = "E: %ip (%speed)"
727 format_down = "E: down"
728}
729
730battery 0 {
731 format = "%status %percentage %remaining (%consumption)"
732 path = "/sys/class/power_supply/BAT%d/uevent"
733 low_threshold = "10"
734 threshold_type = "percentage"
735 last_full_capacity = true
736 integer_battery_capacity = true
737 hide_seconds = true
738}
739
740tztime local {
741 format = "%-I:%M%P %a %b %d"
742}
743
744volume master {
745 format = "♪ %volume"
746 format_muted = "🔇 %volume"
747 device = "pulse"
748}
749
750load {
751 format = "%1min"
752}
753
754disk "/" {
755 format = "/ %avail"
756}
757
758disk "/data" {
759 format = "/data %avail"
760}
761#+end_src
762
763** isync
764
765*** mbsyncrc
766:PROPERTIES:
767:header-args+: :tangle ~/.mbsyncrc
768:END:
769
770#+begin_src conf
771# Global defaults
772CopyArrivalDate yes
773Create Both
774Expunge Both
775
776######
777IMAPAccount amin
778Host mail.bndl.org
779User amin@bndl.org
780PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
781SSLType IMAPS
782
783IMAPStore amin-remote
784Account amin
785
786IMAPAccount amin-dovecot
787Host 127.0.0.1
788Port 143
789User amin@bndl.org
790PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin-dovecot.gpg"
791SSLType None
792
793IMAPStore amin-local
794Account amin-dovecot
795
796Channel amin
797Master :amin-remote:
798Slave :amin-local:
799Patterns *
800
801######
802IMAPAccount uwaterloo
803Host connect.uwaterloo.ca
804User abandali
805PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
806SSLType IMAPS
807
808IMAPStore uwaterloo-remote
809Account uwaterloo
810
811IMAPAccount uwaterloo-dovecot
812Host 127.0.0.1
813Port 143
814User abandali@uwaterloo.ca
815PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo-dovecot.gpg"
816SSLType None
817
818IMAPStore uwaterloo-local
819Account uwaterloo-dovecot
820
821Channel uwaterloo
822Master :uwaterloo-remote:
823Slave :uwaterloo-local:
824Patterns *
825
826######
827IMAPAccount csclub
828Host mail.csclub.uwaterloo.ca
829User abandali
830PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/csclub.gpg"
831SSLType IMAPS
832
833IMAPStore csclub-remote
834Account csclub
835
836IMAPAccount csclub-dovecot
837Host 127.0.0.1
838Port 143
839User abandali@csclub.uw
840PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/csclub-dovecot.gpg"
841SSLType None
842
843IMAPStore csclub-local
844Account csclub-dovecot
845
846Channel csclub
847Master :csclub-remote:
848Slave :csclub-local:
849Patterns *
850#+end_src
851
852*** mbsync.service
853:PROPERTIES:
854:header-args+: :tangle ~/.config/systemd/user/mbsync.service
855:END:
856
857#+begin_src conf :tangle no
858[Unit]
859Description=mbsync service
860
861[Service]
862Type=oneshot
863ExecStart=/usr/bin/mbsync -Va
864StandardOutput=syslog
865StandardError=syslog
866#+end_src
867
868*** mbsync.timer
869:PROPERTIES:
870:header-args+: :tangle ~/.config/systemd/user/mbsync.timer
871:END:
872
873#+begin_src conf :tangle no
874[Unit]
875Description=mbsync timer
876
877[Timer]
878OnCalendar=*:0/15
879Persistent=true
880Unit=mbsync.service
881
882[Install]
883WantedBy=timers.target
884#+end_src
885
886** Latexmk
887:PROPERTIES:
888:header-args+: :tangle ~/.latexmkrc
889:END:
890
891#+begin_src conf
892$pdf_previewer = "start zathura %O %S";
893$clean_ext = "aux out";
894
895# $pdf_update_method = 4;
896# $pdf_update_command = "zathura %O %S";
897
898# Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
899# by Ctrl+click in the PDF.
900# Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
901# editor.
902# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
903#+end_src
904
905** libinput
906
907Improve XPS 15 9560's touchpad experience.
908
909# begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
910#+begin_src conf :tangle no
911Section "InputClass"
912 Identifier "libinput touchpad catchall"
913 Driver "libinput"
914 MatchIsTouchpad "on"
915 Option "ClickMethod" "clickfinger"
916 Option "NaturalScrolling" "true"
917 Option "Tapping" "on"
918 Option "TappingButtonMap" "lrm"
919EndSection
920#+end_src
921
922** mkinitcpio
923
924#+begin_src conf :tangle /sudo::/etc/mkinitcpio.conf :comments none
925# vim:set ft=sh
926# MODULES
927# The following modules are loaded before any boot hooks are
928# run. Advanced users may wish to specify all system modules
929# in this array. For instance:
930# MODULES=(piix ide_disk reiserfs)
931MODULES=(i915)
932
933# BINARIES
934# This setting includes any additional binaries a given user may
935# wish into the CPIO image. This is run last, so it may be used to
936# override the actual binaries included by a given hook
937# BINARIES are dependency parsed, so you may safely ignore libraries
938BINARIES=()
939
940# FILES
941# This setting is similar to BINARIES above, however, files are added
942# as-is and are not parsed in any way. This is useful for config files.
943FILES=()
944
945# HOOKS
946# This is the most important setting in this file. The HOOKS control the
947# modules and scripts added to the image, and what happens at boot time.
948# Order is important, and it is recommended that you do not change the
949# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
950# help on a given hook.
951# 'base' is _required_ unless you know precisely what you are doing.
952# 'udev' is _required_ in order to automatically load modules
953# 'filesystems' is _required_ unless you specify your fs modules in MODULES
954# Examples:
955## This setup specifies all modules in the MODULES setting above.
956## No raid, lvm2, or encrypted root is needed.
957# HOOKS=(base)
958#
959## This setup will autodetect all modules for your system and should
960## work as a sane default
961# HOOKS=(base udev autodetect block filesystems)
962#
963## This setup will generate a 'full' image which supports most systems.
964## No autodetection is done.
965# HOOKS=(base udev block filesystems)
966#
967## This setup assembles a pata mdadm array with an encrypted root FS.
968## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
969# HOOKS=(base udev block mdadm encrypt filesystems)
970#
971## This setup loads an lvm2 volume group on a usb device.
972# HOOKS=(base udev block lvm2 filesystems)
973#
974## NOTE: If you have /usr on a separate partition, you MUST include the
975# usr, fsck and shutdown hooks.
976HOOKS=(base udev autodetect modconf block keyboard encrypt lvm2 resume filesystems fsck)
977
978# COMPRESSION
979# Use this to compress the initramfs image. By default, gzip compression
980# is used. Use 'cat' to create an uncompressed image.
981#COMPRESSION="gzip"
982#COMPRESSION="bzip2"
983#COMPRESSION="lzma"
984#COMPRESSION="xz"
985#COMPRESSION="lzop"
986#COMPRESSION="lz4"
987
988# COMPRESSION_OPTIONS
989# Additional options for the compressor
990#COMPRESSION_OPTIONS=()
991#+end_src
992
993** mpd
994:PROPERTIES:
995:header-args+: :tangle ~/.config/mpd/mpd.conf
996:END:
997
998#+begin_src conf
999# An example configuration file for MPD.
1000# Read the user manual for documentation: http://www.musicpd.org/doc/user/
1001
1002
1003# Files and directories #######################################################
1004#
1005# This setting controls the top directory which MPD will search to discover the
1006# available audio files and add them to the daemon's online database. This
1007# setting defaults to the XDG directory, otherwise the music directory will be
1008# be disabled and audio files will only be accepted over ipc socket (using
1009# file:// protocol) or streaming files over an accepted protocol.
1010#
1011music_directory "~/usr/music"
1012#
1013# This setting sets the MPD internal playlist directory. The purpose of this
1014# directory is storage for playlists created by MPD. The server will use
1015# playlist files not created by the server but only if they are in the MPD
1016# format. This setting defaults to playlist saving being disabled.
1017#
1018playlist_directory "~/.mpd/playlists"
1019#
1020# This setting sets the location of the MPD database. This file is used to
1021# load the database at server start up and store the database while the
1022# server is not up. This setting defaults to disabled which will allow
1023# MPD to accept files over ipc socket (using file:// protocol) or streaming
1024# files over an accepted protocol.
1025#
1026db_file "~/.mpd/database"
1027#
1028# These settings are the locations for the daemon log files for the daemon.
1029# These logs are great for troubleshooting, depending on your log_level
1030# settings.
1031#
1032# The special value "syslog" makes MPD use the local syslog daemon. This
1033# setting defaults to logging to syslog, otherwise logging is disabled.
1034#
1035log_file "~/.mpd/log"
1036#
1037# This setting sets the location of the file which stores the process ID
1038# for use of mpd --kill and some init scripts. This setting is disabled by
1039# default and the pid file will not be stored.
1040#
1041pid_file "~/.mpd/pid"
1042#
1043# This setting sets the location of the file which contains information about
1044# most variables to get MPD back into the same general shape it was in before
1045# it was brought down. This setting is disabled by default and the server
1046# state will be reset on server start up.
1047#
1048state_file "~/.mpd/state"
1049#
1050# The location of the sticker database. This is a database which
1051# manages dynamic information attached to songs.
1052#
1053sticker_file "~/.mpd/sticker.sql"
1054#
1055###############################################################################
1056
1057
1058# General music daemon options ################################################
1059#
1060# This setting specifies the user that MPD will run as. MPD should never run as
1061# root and you may use this setting to make MPD change its user ID after
1062# initialization. This setting is disabled by default and MPD is run as the
1063# current user.
1064#
1065#user "nobody"
1066#
1067# This setting specifies the group that MPD will run as. If not specified
1068# primary group of user specified with "user" setting will be used (if set).
1069# This is useful if MPD needs to be a member of group such as "audio" to
1070# have permission to use sound card.
1071#
1072#group "nogroup"
1073#
1074# This setting sets the address for the daemon to listen on. Careful attention
1075# should be paid if this is assigned to anything other then the default, any.
1076# This setting can deny access to control of the daemon. Not effective if
1077# systemd socket activiation is in use.
1078#
1079# For network
1080#bind_to_address "any"
1081#
1082# And for Unix Socket
1083#bind_to_address "~/.mpd/socket"
1084#
1085# This setting is the TCP port that is desired for the daemon to get assigned
1086# to.
1087#
1088#port "6600"
1089#
1090# This setting controls the type of information which is logged. Available
1091# setting arguments are "default", "secure" or "verbose". The "verbose" setting
1092# argument is recommended for troubleshooting, though can quickly stretch
1093# available resources on limited hardware storage.
1094#
1095#log_level "default"
1096#
1097# If you have a problem with your MP3s ending abruptly it is recommended that
1098# you set this argument to "no" to attempt to fix the problem. If this solves
1099# the problem, it is highly recommended to fix the MP3 files with vbrfix
1100# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
1101# point gapless MP3 playback can be enabled.
1102#
1103#gapless_mp3_playback "yes"
1104#
1105# Setting "restore_paused" to "yes" puts MPD into pause mode instead
1106# of starting playback after startup.
1107#
1108#restore_paused "no"
1109#
1110# This setting enables MPD to create playlists in a format usable by other
1111# music players.
1112#
1113#save_absolute_paths_in_playlists "no"
1114#
1115# This setting defines a list of tag types that will be extracted during the
1116# audio file discovery process. The complete list of possible values can be
1117# found in the user manual.
1118#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
1119#
1120# This setting enables automatic update of MPD's database when files in
1121# music_directory are changed.
1122#
1123#auto_update "yes"
1124#
1125# Limit the depth of the directories being watched, 0 means only watch
1126# the music directory itself. There is no limit by default.
1127#
1128#auto_update_depth "3"
1129#
1130###############################################################################
1131
1132
1133# Symbolic link behavior ######################################################
1134#
1135# If this setting is set to "yes", MPD will discover audio files by following
1136# symbolic links outside of the configured music_directory.
1137#
1138#follow_outside_symlinks "yes"
1139#
1140# If this setting is set to "yes", MPD will discover audio files by following
1141# symbolic links inside of the configured music_directory.
1142#
1143#follow_inside_symlinks "yes"
1144#
1145###############################################################################
1146
1147
1148# Zeroconf / Avahi Service Discovery ##########################################
1149#
1150# If this setting is set to "yes", service information will be published with
1151# Zeroconf / Avahi.
1152#
1153#zeroconf_enabled "yes"
1154#
1155# The argument to this setting will be the Zeroconf / Avahi unique name for
1156# this MPD server on the network.
1157#
1158#zeroconf_name "Music Player"
1159#
1160###############################################################################
1161
1162
1163# Permissions #################################################################
1164#
1165# If this setting is set, MPD will require password authorization. The password
1166# setting can be specified multiple times for different password profiles.
1167#
1168#password "password@read,add,control,admin"
1169#
1170# This setting specifies the permissions a user has who has not yet logged in.
1171#
1172#default_permissions "read,add,control,admin"
1173#
1174###############################################################################
1175
1176
1177# Database #######################################################################
1178#
1179
1180#database {
1181# plugin "proxy"
1182# host "other.mpd.host"
1183# port "6600"
1184#}
1185
1186# Input #######################################################################
1187#
1188
1189input {
1190 plugin "curl"
1191# proxy "proxy.isp.com:8080"
1192# proxy_user "user"
1193# proxy_password "password"
1194}
1195
1196#
1197###############################################################################
1198
1199# Audio Output ################################################################
1200#
1201
1202audio_output {
1203 type "pulse"
1204 name "pulse audio"
1205}
1206
1207audio_output {
1208 type "fifo"
1209 name "my_fifo"
1210 path "/tmp/mpd.fifo"
1211 format "44100:16:2"
1212}
1213
1214# MPD supports various audio output types, as well as playing through multiple
1215# audio outputs at the same time, through multiple audio_output settings
1216# blocks. Setting this block is optional, though the server will only attempt
1217# autodetection for one sound card.
1218#
1219# An example of an ALSA output:
1220#
1221#audio_output {
1222# type "alsa"
1223# name "My ALSA Device"
1224## device "hw:0,0" # optional
1225## mixer_type "hardware" # optional
1226## mixer_device "default" # optional
1227## mixer_control "PCM" # optional
1228## mixer_index "0" # optional
1229#}
1230#
1231# An example of an OSS output:
1232#
1233#audio_output {
1234# type "oss"
1235# name "My OSS Device"
1236## device "/dev/dsp" # optional
1237## mixer_type "hardware" # optional
1238## mixer_device "/dev/mixer" # optional
1239## mixer_control "PCM" # optional
1240#}
1241#
1242# An example of a shout output (for streaming to Icecast):
1243#
1244#audio_output {
1245# type "shout"
1246# encoder "vorbis" # optional
1247# name "My Shout Stream"
1248# host "localhost"
1249# port "8000"
1250# mount "/mpd.ogg"
1251# password "hackme"
1252# quality "5.0"
1253# bitrate "128"
1254# format "44100:16:1"
1255## protocol "icecast2" # optional
1256## user "source" # optional
1257## description "My Stream Description" # optional
1258## url "http://example.com" # optional
1259## genre "jazz" # optional
1260## public "no" # optional
1261## timeout "2" # optional
1262## mixer_type "software" # optional
1263#}
1264#
1265# An example of a recorder output:
1266#
1267#audio_output {
1268# type "recorder"
1269# name "My recorder"
1270# encoder "vorbis" # optional, vorbis or lame
1271# path "/var/lib/mpd/recorder/mpd.ogg"
1272## quality "5.0" # do not define if bitrate is defined
1273# bitrate "128" # do not define if quality is defined
1274# format "44100:16:1"
1275#}
1276#
1277# An example of a httpd output (built-in HTTP streaming server):
1278#
1279#audio_output {
1280# type "httpd"
1281# name "My HTTP Stream"
1282# encoder "vorbis" # optional, vorbis or lame
1283# port "8000"
1284# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
1285## quality "5.0" # do not define if bitrate is defined
1286# bitrate "128" # do not define if quality is defined
1287# format "44100:16:1"
1288# max_clients "0" # optional 0=no limit
1289#}
1290#
1291# An example of a pulseaudio output (streaming to a remote pulseaudio server)
1292#
1293#audio_output {
1294# type "pulse"
1295# name "My Pulse Output"
1296## server "remote_server" # optional
1297## sink "remote_server_sink" # optional
1298#}
1299#
1300# An example of a winmm output (Windows multimedia API).
1301#
1302#audio_output {
1303# type "winmm"
1304# name "My WinMM output"
1305## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1306# or
1307## device "0" # optional
1308## mixer_type "hardware" # optional
1309#}
1310#
1311# An example of an openal output.
1312#
1313#audio_output {
1314# type "openal"
1315# name "My OpenAL output"
1316## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1317#}
1318#
1319# An example of an sndio output.
1320#
1321#audio_output {
1322# type "sndio"
1323# name "sndio output"
1324# mixer_type "software"
1325#}
1326#
1327# An example of an OS X output:
1328#
1329#audio_output {
1330# type "osx"
1331# name "My OS X Device"
1332## device "Built-in Output" # optional
1333## channel_map "-1,-1,0,1" # optional
1334#}
1335#
1336## Example "pipe" output:
1337#
1338#audio_output {
1339# type "pipe"
1340# name "my pipe"
1341# command "aplay -f cd 2>/dev/null"
1342## Or if you're want to use AudioCompress
1343# command "AudioCompress -m | aplay -f cd 2>/dev/null"
1344## Or to send raw PCM stream through PCM:
1345# command "nc example.org 8765"
1346# format "44100:16:2"
1347#}
1348#
1349## An example of a null output (for no audio output):
1350#
1351#audio_output {
1352# type "null"
1353# name "My Null Output"
1354# mixer_type "none" # optional
1355#}
1356#
1357###############################################################################
1358
1359
1360# Normalization automatic volume adjustments ##################################
1361#
1362# This setting specifies the type of ReplayGain to use. This setting can have
1363# the argument "off", "album", "track" or "auto". "auto" is a special mode that
1364# chooses between "track" and "album" depending on the current state of
1365# random playback. If random playback is enabled then "track" mode is used.
1366# See <http://www.replaygain.org> for more details about ReplayGain.
1367# This setting is off by default.
1368#
1369#replaygain "album"
1370#
1371# This setting sets the pre-amp used for files that have ReplayGain tags. By
1372# default this setting is disabled.
1373#
1374#replaygain_preamp "0"
1375#
1376# This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1377# By default this setting is disabled.
1378#
1379#replaygain_missing_preamp "0"
1380#
1381# This setting enables or disables ReplayGain limiting.
1382# MPD calculates actual amplification based on the ReplayGain tags
1383# and replaygain_preamp / replaygain_missing_preamp setting.
1384# If replaygain_limit is enabled MPD will never amplify audio signal
1385# above its original level. If replaygain_limit is disabled such amplification
1386# might occur. By default this setting is enabled.
1387#
1388#replaygain_limit "yes"
1389#
1390# This setting enables on-the-fly normalization volume adjustment. This will
1391# result in the volume of all playing audio to be adjusted so the output has
1392# equal "loudness". This setting is disabled by default.
1393#
1394#volume_normalization "no"
1395#
1396###############################################################################
1397
1398# Character Encoding ##########################################################
1399#
1400# If file or directory names do not display correctly for your locale then you
1401# may need to modify this setting.
1402#
1403#filesystem_charset "UTF-8"
1404#
1405###############################################################################
1406#+end_src
1407
1408** msmtp
1409:PROPERTIES:
1410:header-args+: :tangle ~/.msmtprc
1411:END:
1412
1413#+begin_src conf
1414# Set default values for all following accounts.
1415defaults
1416port 587
1417tls on
1418auth on
1419#tls_trust_file /etc/ssl/certs/ca-certificates.crt
1420logfile ~/.msmtp.log
1421
1422# amin
1423account amin
1424host mail.bndl.org
1425# use `msmtp -a amin --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1426tls_fingerprint B8:17:DF:D7:26:56:4F:CD:F0:51:D5:E5:4C:44:B6:F1:C9:47:E7:A2:C7:36:C9:C1:F2:10:85:18:43:72:9D:ED
1427tls_starttls on
1428from amin@bndl.org
1429user amin@bndl.org
1430passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
1431
1432account aminb : amin
1433from amin@aminb.org
1434
1435# gnu
1436account gnu
1437host fencepost.gnu.org
1438# use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1439tls_fingerprint FB:DB:E3:7D:96:22:22:20:9F:4A:FD:70:96:99:50:5C:39:B2:29:D9:47:47:52:A8:5A:4A:DF:70:9D:21:DE:C4
1440tls_starttls on
1441from bandali@gnu.org
1442user bandali
1443passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
1444
1445# gnu (old)
1446account gnu-aminb : gnu
1447from aminb@gnu.org
1448account gnu-amin : gnu
1449from amin@gnu.org
1450account gnu-mab : gnu
1451from mab@gnu.org
1452
1453# uwaterloo
1454account uwaterloo
1455host connect.uwaterloo.ca
1456tls_starttls on
1457from abandali@uwaterloo.ca
1458user abandali
1459passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
1460tls_trust_file /etc/ssl/certs/ca-certificates.crt
1461
1462# csclub
1463account csclub
1464host mail.csclub.uwaterloo.ca
1465tls_starttls on
1466from abandali@csclub.uwaterloo.ca
1467user abandali
1468passwordeval gpg2 --no-tty -q -d ~/.passwd/csclub.gpg
1469tls_trust_file /etc/ssl/certs/ca-certificates.crt
1470
1471# Set a default account
1472account default : amin
1473#+end_src
1474
1475** ncmpcpp
1476
1477*** config
1478:PROPERTIES:
1479:header-args+: :tangle ~/.ncmpcpp/config
1480:END:
1481
1482#+begin_src conf :tangle no
1483##############################################################
1484## This is the example configuration file. Copy it to ##
1485## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
1486## and set up your preferences. ##
1487##############################################################
1488#
1489##### directories ######
1490##
1491## Directory for storing ncmpcpp related files.
1492## Changing it is useful if you want to store
1493## everything somewhere else and provide command
1494## line setting for alternative location to config
1495## file which defines that while launching ncmpcpp.
1496##
1497#
1498ncmpcpp_directory = ~/.ncmpcpp
1499#
1500##
1501## Directory for storing downloaded lyrics. It
1502## defaults to ~/.lyrics since other MPD clients
1503## (eg. ncmpc) also use that location.
1504##
1505#
1506#lyrics_directory = ~/.lyrics
1507#
1508##### connection settings #####
1509#
1510#mpd_host = localhost
1511#
1512#mpd_port = 6600
1513#
1514#mpd_connection_timeout = 5
1515#
1516## Needed for tag editor and file operations to work.
1517##
1518mpd_music_dir = ~/usr/music
1519#
1520#mpd_crossfade_time = 5
1521#
1522##### music visualizer #####
1523##
1524## Note: In order to make music visualizer work you'll
1525## need to use mpd fifo output, whose format parameter
1526## has to be set to 44100:16:1 for mono visualization
1527## or 44100:16:2 for stereo visualization. Example
1528## configuration (it has to be put into mpd.conf):
1529##
1530## audio_output {
1531## type "fifo"
1532## name "Visualizer feed"
1533## path "/tmp/mpd.fifo"
1534## format "44100:16:2"
1535## }
1536##
1537#
1538visualizer_fifo_path = /tmp/mpd.fifo
1539#
1540##
1541## Note: Below parameter is needed for ncmpcpp
1542## to determine which output provides data for
1543## visualizer and thus allow syncing between
1544## visualization and sound as currently there
1545## are some problems with it.
1546##
1547#
1548visualizer_output_name = my fifo
1549#
1550##
1551## If you set format to 44100:16:2, make it 'yes'.
1552##
1553visualizer_in_stereo = yes
1554#
1555##
1556## Multiply received samples by given value. Very
1557## useful for proper visualization of quiet music.
1558##
1559#visualizer_sample_multiplier = 1
1560#
1561##
1562## Note: Below parameter defines how often ncmpcpp
1563## has to "synchronize" visualizer and audio outputs.
1564## 30 seconds is optimal value, but if you experience
1565## synchronization problems, set it to lower value.
1566## Keep in mind that sane values start with >=10.
1567##
1568#
1569visualizer_sync_interval = 30
1570#
1571##
1572## Note: To enable spectrum frequency visualization
1573## you need to compile ncmpcpp with fftw3 support.
1574##
1575#
1576## Available values: spectrum, wave, wave_filled, ellipse.
1577##
1578visualizer_type = spectrum
1579#
1580#visualizer_look = ●▮
1581visualizer_look = "●•"
1582#
1583#visualizer_color = blue, cyan, green, yellow, magenta, red
1584#
1585## Alternative subset of 256 colors for terminals that support it.
1586##
1587#visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
1588#
1589##### system encoding #####
1590##
1591## ncmpcpp should detect your charset encoding
1592## but if it failed to do so, you can specify
1593## charset encoding you are using here.
1594##
1595## Note: You can see whether your ncmpcpp build
1596## supports charset detection by checking output
1597## of `ncmpcpp --version`.
1598##
1599## Note: Since MPD uses UTF-8 by default, setting
1600## this option makes sense only if your encoding
1601## is different.
1602##
1603#
1604#system_encoding = ""
1605#
1606##### delays #####
1607#
1608## Time of inactivity (in seconds) after playlist
1609## highlighting will be disabled (0 = always on).
1610##
1611#playlist_disable_highlight_delay = 5
1612#
1613## Defines how long messages are supposed to be visible.
1614##
1615#message_delay_time = 5
1616#
1617##### song format #####
1618##
1619## For a song format you can use:
1620##
1621## %l - length
1622## %f - filename
1623## %D - directory
1624## %a - artist
1625## %A - album artist
1626## %t - title
1627## %b - album
1628## %y - date
1629## %n - track number (01/12 -> 01)
1630## %N - full track info (01/12 -> 01/12)
1631## %g - genre
1632## %c - composer
1633## %p - performer
1634## %d - disc
1635## %C - comment
1636## %P - priority
1637## $R - begin right alignment
1638##
1639## If you want to make sure that a part of the format is displayed
1640## only when certain tags are present, you can archieve it by
1641## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
1642## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
1643## It is also possible to define a list of alternatives by providing
1644## several groups and separating them with '|', e.g. '{%t}|{%f}'
1645## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
1646## present.
1647##
1648## Note: If you want to set limit on maximal length of a tag, just
1649## put the appropriate number between % and character that defines
1650## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
1651##
1652## In addition, formats support markers used for text attributes.
1653## They are followed by character '$'. After that you can put:
1654##
1655## - 0 - default window color (discards all other colors)
1656## - 1 - black
1657## - 2 - red
1658## - 3 - green
1659## - 4 - yellow
1660## - 5 - blue
1661## - 6 - magenta
1662## - 7 - cyan
1663## - 8 - white
1664## - 9 - end of current color
1665## - b - bold text
1666## - u - underline text
1667## - r - reverse colors
1668## - a - use alternative character set
1669##
1670## If you don't want to use a non-color attribute anymore, just put it
1671## again, but this time insert character '/' between '$' and attribute
1672## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
1673## or filename with reversed colors.
1674##
1675## If you want to use 256 colors and/or background colors in formats
1676## (the naming scheme is described below in section about color
1677## definitions), it can be done with the syntax $(COLOR), e.g. to set
1678## the artist tag to one of the non-standard colors and make it have
1679## yellow background, you need to write $(197_yellow)%a$(end). Note
1680## that for standard colors this is interchangable with attributes
1681## listed above.
1682##
1683## Note: colors can be nested.
1684##
1685#
1686#song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
1687#
1688#song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
1689#
1690#song_library_format = {%n - }{%t}|{%f}
1691#
1692#
1693#alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
1694#
1695#alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
1696#
1697#now_playing_prefix = $b
1698#
1699#now_playing_suffix = $/b
1700#
1701#browser_playlist_prefix = "$2playlist$9 "
1702#
1703#selected_item_prefix = $6
1704#
1705#selected_item_suffix = $9
1706#
1707#modified_item_prefix = $3> $9
1708#
1709##
1710## Note: attributes are not supported for the following variables.
1711##
1712#song_window_title_format = {%a - }{%t}|{%f}
1713##
1714## Note: Below variables are used for sorting songs in browser.
1715## The sort mode determines how songs are sorted, and can be used
1716## in combination with a sort format to specify a custom sorting format.
1717## Available values for browser_sort_mode are "name", "mtime", "format"
1718## and "noop".
1719##
1720#
1721#browser_sort_mode = name
1722#
1723#browser_sort_format = {%a - }{%t}|{%f} {(%l)}
1724#
1725##### columns settings #####
1726##
1727## syntax of song columns list format is "column column etc."
1728##
1729## - syntax for each column is:
1730##
1731## (width of the column)[color of the column]{displayed tag}
1732##
1733## Note: Width is by default in %, if you want a column to
1734## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
1735## will be the column that take 10% of screen (so the real width
1736## will depend on actual screen size), whereas (10f)[white]{a}
1737## will take 10 terminal cells, no matter how wide the screen is.
1738##
1739## - color is optional (if you want the default one,
1740## leave the field empty).
1741##
1742## Note: You can give a column additional attributes by putting appropriate
1743## character after displayed tag character. Available attributes are:
1744##
1745## - r - column will be right aligned
1746## - E - if tag is empty, empty tag marker won't be displayed
1747##
1748## You can also:
1749##
1750## - give a column custom name by putting it after attributes,
1751## separated with character ':', e.g. {lr:Length} gives you
1752## right aligned column of lengths named "Length".
1753##
1754## - define sequence of tags, that have to be displayed in case
1755## predecessor is empty in a way similar to the one in classic
1756## song format, i.e. using '|' character, e.g. {a|c|p:Owner}
1757## creates column named "Owner" that tries to display artist
1758## tag and then composer and performer if previous ones are
1759## not available.
1760##
1761#
1762#song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
1763#
1764##### various settings #####
1765#
1766##
1767## Note: Custom command that will be executed each
1768## time song changes. Useful for notifications etc.
1769##
1770#execute_on_song_change = ""
1771#
1772#playlist_show_mpd_host = no
1773#
1774#playlist_show_remaining_time = no
1775#
1776#playlist_shorten_total_times = no
1777#
1778#playlist_separate_albums = no
1779#
1780##
1781## Note: Possible display modes: classic, columns.
1782##
1783#playlist_display_mode = columns
1784#
1785#browser_display_mode = classic
1786#
1787#search_engine_display_mode = classic
1788#
1789#playlist_editor_display_mode = classic
1790#
1791#discard_colors_if_item_is_selected = yes
1792#
1793#incremental_seeking = yes
1794#
1795#seek_time = 1
1796#
1797#volume_change_step = 2
1798#
1799#autocenter_mode = no
1800#
1801#centered_cursor = no
1802#
1803##
1804## Note: You can specify third character which will
1805## be used to build 'empty' part of progressbar.
1806##
1807#progressbar_look = =>
1808progressbar_look = "─╼╶"
1809#progressbar_look = "─⊙╶"
1810#
1811#progressbar_boldness = yes
1812#
1813## Available values: database, playlist.
1814##
1815#default_place_to_search_in = database
1816#
1817## Available values: classic, alternative.
1818##
1819#user_interface = classic
1820#
1821#data_fetching_delay = yes
1822#
1823## Available values: artist, album_artist, date, genre, composer, performer.
1824##
1825#media_library_primary_tag = artist
1826#
1827## Available values: wrapped, normal.
1828##
1829#default_find_mode = wrapped
1830#
1831#default_tag_editor_pattern = %n - %t
1832#
1833#header_visibility = yes
1834#
1835#statusbar_visibility = yes
1836#
1837#titles_visibility = yes
1838#
1839#header_text_scrolling = yes
1840#
1841#cyclic_scrolling = no
1842#
1843#lines_scrolled = 2
1844#
1845#follow_now_playing_lyrics = no
1846#
1847#fetch_lyrics_for_current_song_in_background = no
1848#
1849#store_lyrics_in_song_dir = no
1850#
1851#generate_win32_compatible_filenames = yes
1852#
1853#allow_for_physical_item_deletion = no
1854#
1855##
1856## Note: If you set this variable, ncmpcpp will try to
1857## get info from last.fm in language you set and if it
1858## fails, it will fall back to english. Otherwise it will
1859## use english the first time.
1860##
1861## Note: Language has to be expressed as an ISO 639 alpha-2 code.
1862##
1863#lastfm_preferred_language = en
1864#
1865#show_hidden_files_in_local_browser = no
1866#
1867##
1868## How shall screen switcher work?
1869##
1870## - "previous" - switch between the current and previous screen.
1871## - "screen1,...,screenN" - switch between given sequence of screens.
1872##
1873## Screens available for use: help, playlist, browser, search_engine,
1874## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
1875##
1876#screen_switcher_mode = playlist, browser
1877#
1878##
1879## Note: You can define startup screen
1880## by choosing screen from the list above.
1881##
1882#startup_screen = playlist
1883#
1884##
1885## Note: You can define startup slave screen
1886## by choosing screen from the list above or
1887## an empty value for no slave screen.
1888##
1889#startup_slave_screen = ""
1890#
1891#startup_slave_screen_focus = no
1892#
1893##
1894## Default width of locked screen (in %).
1895## Acceptable values are from 20 to 80.
1896##
1897#
1898#locked_screen_width_part = 50
1899#
1900#ask_for_locked_screen_width_part = yes
1901#
1902#jump_to_now_playing_song_at_start = yes
1903#
1904#ask_before_clearing_playlists = yes
1905#
1906#clock_display_seconds = no
1907#
1908#display_volume_level = yes
1909#
1910#display_bitrate = no
1911#
1912#display_remaining_time = no
1913#
1914## Available values: none, basic, extended, perl.
1915##
1916#regular_expressions = perl
1917#
1918##
1919## Note: If below is enabled, ncmpcpp will ignore leading
1920## "The" word while sorting items in browser, tags in
1921## media library, etc.
1922##
1923#ignore_leading_the = no
1924#
1925#block_search_constraints_change_if_items_found = yes
1926#
1927#mouse_support = yes
1928#
1929#mouse_list_scroll_whole_page = yes
1930#
1931#empty_tag_marker = <empty>
1932#
1933#tags_separator = " | "
1934#
1935#tag_editor_extended_numeration = no
1936#
1937#media_library_sort_by_mtime = no
1938#
1939#enable_window_title = yes
1940#
1941##
1942## Note: You can choose default search mode for search
1943## engine. Available modes are:
1944##
1945## - 1 - use mpd built-in searching (no regexes, pattern matching)
1946## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
1947## but if your mpd is on a remote machine, downloading big database
1948## to process it can take a while
1949## - 3 - match only exact values (this mode uses mpd function for searching
1950## in database and local one for searching in current playlist)
1951##
1952#
1953#search_engine_default_search_mode = 1
1954#
1955#external_editor = nano
1956#
1957## Note: set to yes if external editor is a console application.
1958##
1959#use_console_editor = yes
1960#
1961##### colors definitions #####
1962##
1963## It is possible to set a background color by setting a color
1964## value "<foreground>_<background>", e.g. red_black will set
1965## foregound color to red and background color to black.
1966##
1967## In addition, for terminals that support 256 colors it
1968## is possible to set one of them by using a number in range
1969## [1, 256] instead of color name, e.g. numerical value
1970## corresponding to red_black is 2_1. To find out if the
1971## terminal supports 256 colors, run ncmpcpp and check out
1972## the bottom of the help screen for list of available colors
1973## and their numerical values.
1974##
1975## Note: due to technical limitations of ncurses, if 256 colors
1976## are used, it is possible to either use only the colors with
1977## default background color, or all pairs from 1_1 up to 254_127,
1978## depending on the ncurses version used.
1979##
1980#
1981#colors_enabled = yes
1982#
1983#empty_tag_color = cyan
1984#
1985#header_window_color = default
1986#
1987#volume_color = default
1988#
1989#state_line_color = default
1990#
1991#state_flags_color = default
1992#
1993#main_window_color = yellow
1994#
1995#color1 = white
1996#
1997#color2 = green
1998#
1999#main_window_highlight_color = yellow
2000#
2001#progressbar_color = black
2002#
2003#progressbar_elapsed_color = green
2004#
2005#statusbar_color = default
2006#
2007#alternative_ui_separator_color = black
2008#
2009#active_column_color = red
2010#
2011#window_border_color = green
2012#
2013#active_window_border = red
2014#
2015#+end_src
2016
2017*** bindings
2018:PROPERTIES:
2019:header-args+: :tangle ~/.ncmpcpp/bindings
2020:END:
2021
2022#+begin_src conf :tangle no
2023def_key "j"
2024 scroll_down
2025def_key "k"
2026 scroll_up
2027
2028def_key "ctrl-u"
2029 page_up
2030def_key "ctrl-d"
2031 page_down
2032
2033def_key "h"
2034 previous_column
2035def_key "l"
2036 next_column
2037
2038def_key "."
2039 show_lyrics
2040
2041def_key "n"
2042 next_found_item
2043def_key "N"
2044 previous_found_item
2045
2046def_key "J"
2047 move_sort_order_down
2048def_key "K"
2049 move_sort_order_up
2050#+end_src
2051
2052** notmuch
2053
2054*** notmuch-config
2055:PROPERTIES:
2056:header-args+: :tangle ~/.notmuch-config
2057:END:
2058
2059#+begin_src conf
2060# .notmuch-config - Configuration file for the notmuch mail system
2061#
2062# For more information about notmuch, see https://notmuchmail.org
2063
2064# Database configuration
2065#
2066# The only value supported here is 'path' which should be the top-level
2067# directory where your mail currently exists and to where mail will be
2068# delivered in the future. Files should be individual email messages.
2069# Notmuch will store its database within a sub-directory of the path
2070# configured here named ".notmuch".
2071#
2072[database]
2073path=/home/amin/oldmail
2074
2075# User configuration
2076#
2077# Here is where you can let notmuch know how you would like to be
2078# addressed. Valid settings are
2079#
2080# name Your full name.
2081# primary_email Your primary email address.
2082# other_email A list (separated by ';') of other email addresses
2083# at which you receive email.
2084#
2085# Notmuch will use the various email addresses configured here when
2086# formatting replies. It will avoid including your own addresses in the
2087# recipient list of replies, and will set the From address based on the
2088# address to which the original email was addressed.
2089#
2090[user]
2091name=Amin Bandali
2092primary_email=amin@aminb.org
2093other_email=bandali@gnu.org;abandali@uwaterloo.ca;
2094
2095# Configuration for "notmuch new"
2096#
2097# The following options are supported here:
2098#
2099# tags A list (separated by ';') of the tags that will be
2100# added to all messages incorporated by "notmuch new".
2101#
2102# ignore A list (separated by ';') of file and directory names
2103# that will not be searched for messages by "notmuch new".
2104#
2105# NOTE: *Every* file/directory that goes by one of those
2106# names will be ignored, independent of its depth/location
2107# in the mail store.
2108#
2109[new]
2110tags=new;
2111#tags=unread;inbox;
2112ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
2113
2114# Search configuration
2115#
2116# The following option is supported here:
2117#
2118# exclude_tags
2119# A ;-separated list of tags that will be excluded from
2120# search results by default. Using an excluded tag in a
2121# query will override that exclusion.
2122#
2123[search]
2124exclude_tags=deleted;spam;
2125
2126# Maildir compatibility configuration
2127#
2128# The following option is supported here:
2129#
2130# synchronize_flags Valid values are true and false.
2131#
2132# If true, then the following maildir flags (in message filenames)
2133# will be synchronized with the corresponding notmuch tags:
2134#
2135# Flag Tag
2136# ---- -------
2137# D draft
2138# F flagged
2139# P passed
2140# R replied
2141# S unread (added when 'S' flag is not present)
2142#
2143# The "notmuch new" command will notice flag changes in filenames
2144# and update tags, while the "notmuch tag" and "notmuch restore"
2145# commands will notice tag changes and update flags in filenames
2146#
2147[maildir]
2148synchronize_flags=true
2149
2150# Cryptography related configuration
2151#
2152# The following option is supported here:
2153#
2154# gpg_path
2155# binary name or full path to invoke gpg.
2156#
2157[crypto]
2158gpg_path=gpg
2159#+end_src
2160
2161*** pre-new hook
2162:PROPERTIES:
2163:header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
2164:END:
2165
2166#+begin_src sh
2167touch /tmp/gnusieve.log
2168sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
2169 -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
2170#+end_src
2171
2172*** post-new hook
2173:PROPERTIES:
2174:header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
2175:END:
2176
2177#+begin_src sh
2178# apply sent tag to messages sent by me
2179notmuch tag -new +sent -- from:amin@aminb.org or from:bandali@gnu.org or from:aminb@gnu.org or from:amin@gnu.org or from:mab@gnu.org or from:abandali@uwaterloo.ca
2180
2181# initial tagging
2182notmuch tag -latest -- tag:latest
2183notmuch tag +inbox +unread +latest -new -- tag:new
2184
2185
2186# apply tags to lists
2187
2188# <aminb>
2189notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
2190notmuch tag -inbox +lists/haskell-weekly -- folder:amin/lists/haskell-weekly
2191
2192notmuch tag -inbox +pay -- folder:amin/pay
2193notmuch tag -inbox +banking -- folder:amin/banking
2194notmuch tag -inbox +work -- folder:amin/work
2195# </aminb>
2196
2197# <uw>
2198notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
2199notmuch tag -inbox +uw/cs846 -- folder:uwaterloo/lists/cs846
2200notmuch tag -inbox +uw/ece750 -- folder:uwaterloo/lists/ece750
2201notmuch tag -inbox +uw/se212 -- folder:uwaterloo/lists/se212
2202notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
2203
2204notmuch tag -inbox +lists/alloytools -- folder:uwaterloo/lists/alloytools
2205notmuch tag -inbox +lists/clvsingle -- folder:uwaterloo/lists/Clvsingle
2206notmuch tag -inbox +lists/gsa -- folder:uwaterloo/lists/GSA
2207notmuch tag -inbox +lists/math-grad -- folder:uwaterloo/lists/Math-grad
2208notmuch tag -inbox +lists/scs-grads -- folder:uwaterloo/lists/scs-grads
2209notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
2210# </uw>
2211
2212# <gnu>
2213notmuch tag -inbox +l/emacs-devel -- folder:gnu/l/emacs-devel
2214notmuch tag -inbox +l/emacs-orgmode -- folder:gnu/l/emacs-orgmode
2215notmuch tag -inbox +l/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
2216notmuch tag -inbox +l/fencepost-users -- folder:gnu/l/fencepost-users
2217notmuch tag -inbox +l/guix-devel -- folder:gnu/l/guix-devel
2218notmuch tag -inbox +l/guile-devel -- folder:gnu/l/guile-devel
2219notmuch tag -inbox +l/help-gnu-emacs -- folder:gnu/l/help-gnu-emacs
2220notmuch tag -inbox +l/info-gnu-emacs -- folder:gnu/l/info-gnu-emacs
2221notmuch tag -inbox +l/www-commits -- folder:gnu/l/www-commits
2222notmuch tag -inbox +l/www-discuss -- folder:gnu/l/www-discuss
2223notmuch tag -inbox +webmasters -- folder:gnu/webmasters
2224
2225notmuch tag -inbox +l/deepspec -- folder:gnu/l/deepspec
2226notmuch tag -inbox +l/haskell-cafe -- folder:gnu/l/haskell-cafe
2227notmuch tag -inbox +l/haskell-art -- folder:gnu/l/haskell-art
2228notmuch tag -inbox +l/notmuch -- folder:gnu/l/notmuch
2229
2230notmuch tag -inbox +l/~aminb/test-priv -- folder:gnu/l/~aminb/test-priv
2231notmuch tag -inbox +l/~sircmpwn/sr.ht-admins -- folder:gnu/l/~sircmpwn/sr.ht-admins
2232notmuch tag -inbox +l/~sircmpwn/sr.ht-announce -- folder:gnu/l/~sircmpwn/sr.ht-announce
2233notmuch tag -inbox +l/~sircmpwn/sr.ht-dev -- folder:gnu/l/~sircmpwn/sr.ht-dev
2234notmuch tag -inbox +l/~sircmpwn/sr.ht-discuss -- folder:gnu/l/~sircmpwn/sr.ht-discuss
2235# </gnu>
2236
2237notmuch tag -inbox -unread +archive/notmuch -- path:archive/notmuch/**
2238notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**
2239#+end_src
2240
2241*** notmuch.service
2242:PROPERTIES:
2243:header-args+: :tangle ~/.config/systemd/user/notmuch.service
2244:END:
2245
2246#+begin_src conf :tangle no
2247[Unit]
2248Description=notmuch service
2249
2250[Service]
2251Type=oneshot
2252ExecStart=/usr/bin/notmuch new
2253StandardOutput=syslog
2254StandardError=syslog
2255#+end_src
2256
2257*** notmuch.timer
2258:PROPERTIES:
2259:header-args+: :tangle ~/.config/systemd/user/notmuch.timer
2260:END:
2261
2262#+begin_src conf :tangle no
2263[Unit]
2264Description=notmuch timer
2265
2266[Timer]
2267OnCalendar=*:0/5
2268Persistent=true
2269Unit=notmuch.service
2270
2271[Install]
2272WantedBy=timers.target
2273#+end_src
2274
2275** pacman
2276
2277*** conf
2278
2279#+begin_src conf :tangle /sudo::/etc/pacman.conf :comments none
2280#
2281# /etc/pacman.conf
2282#
2283# See the pacman.conf(5) manpage for option and repository directives
2284
2285#
2286# GENERAL OPTIONS
2287#
2288[options]
2289# The following paths are commented out with their default values listed.
2290# If you wish to use different paths, uncomment and update the paths.
2291#RootDir = /
2292#DBPath = /var/lib/pacman/
2293#CacheDir = /var/cache/pacman/pkg/
2294#LogFile = /var/log/pacman.log
2295#GPGDir = /etc/pacman.d/gnupg/
2296#HookDir = /etc/pacman.d/hooks/
2297HoldPkg = pacman glibc
2298#XferCommand = /usr/bin/curl -L -C - -f -o %o %u
2299#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
2300#CleanMethod = KeepInstalled
2301#UseDelta = 0.7
2302Architecture = auto
2303
2304# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
2305#IgnorePkg =
2306#IgnoreGroup =
2307
2308#NoUpgrade =
2309#NoExtract =
2310
2311# Misc options
2312#UseSyslog
2313Color
2314TotalDownload
2315CheckSpace
2316VerbosePkgLists
2317
2318# By default, pacman accepts packages signed by keys that its local keyring
2319# trusts (see pacman-key and its man page), as well as unsigned packages.
2320SigLevel = Required DatabaseOptional
2321LocalFileSigLevel = Optional
2322#RemoteFileSigLevel = Required
2323
2324# NOTE: You must run `pacman-key --init` before first using pacman; the local
2325# keyring can then be populated with the keys of all Arch/Parabola packagers
2326# with `pacman-key --populate archlinux` and `pacman-key --populate parabola`.
2327
2328#
2329# REPOSITORIES
2330# - can be defined here or included from another file
2331# - pacman will search repositories in the order defined here
2332# - local/custom mirrors can be added here or in separate files
2333# - repositories listed first will take precedence when packages
2334# have identical names, regardless of version number
2335# - URLs will have $repo replaced by the name of the current repo
2336# - URLs will have $arch replaced by the name of the architecture
2337#
2338# Repository entries are of the format:
2339# [repo-name]
2340# Server = ServerName
2341# Include = IncludePath
2342#
2343# The header [repo-name] is crucial - it must be present and
2344# uncommented to enable the repo.
2345#
2346
2347# The testing repositories are disabled by default. To enable, uncomment the
2348# repo name header and Include lines. You can add preferred servers immediately
2349# after the header, and they will be used before the default mirrors.
2350
2351# NOTE: Nonprism is a particular repository that aims to provide software built
2352# and patched without services under global data surveillance programs like PRISM,
2353# XKeyscore and Tempora. For more info see: https://wiki.parabola.nu/Nonprism
2354
2355#[nonprism-testing]
2356#Include = /etc/pacman.d/mirrorlist
2357
2358#[nonprism]
2359#Include = /etc/pacman.d/mirrorlist
2360
2361[libre-testing]
2362Include = /etc/pacman.d/mirrorlist
2363
2364[libre]
2365Include = /etc/pacman.d/mirrorlist
2366
2367#[testing]
2368#Include = /etc/pacman.d/mirrorlist
2369
2370[core]
2371Include = /etc/pacman.d/mirrorlist
2372
2373[extra]
2374Include = /etc/pacman.d/mirrorlist
2375
2376#[community-testing]
2377#Include = /etc/pacman.d/mirrorlist
2378
2379[community]
2380Include = /etc/pacman.d/mirrorlist
2381
2382# The PCR (Parabola Community Repository) contains packages maintained by trusted
2383# members of the Parabola community. It also contains packages maintained by
2384# Parabola developers, but that the developer decided didn't belong in core/libre.
2385
2386#[pcr-testing]
2387#Include = /etc/pacman.d/mirrorlist
2388
2389[pcr]
2390Include = /etc/pacman.d/mirrorlist
2391
2392# If you want to run 32 bit applications on your x86_64 system,
2393# enable the libre-multilib, multilib and pcr-multilib repositories as required here.
2394
2395#[nonprism-multilib-testing]
2396#Include = /etc/pacman.d/mirrorlist
2397
2398#[nonprism-multilib]
2399#Include = /etc/pacman.d/mirrorlist
2400
2401#[libre-multilib-testing]
2402#Include = /etc/pacman.d/mirrorlist
2403
2404#[libre-multilib]
2405#Include = /etc/pacman.d/mirrorlist
2406
2407#[multilib-testing]
2408#Include = /etc/pacman.d/mirrorlist
2409
2410#[multilib]
2411#Include = /etc/pacman.d/mirrorlist
2412
2413#[pcr-multilib-testing]
2414#Include = /etc/pacman.d/mirrorlist
2415
2416#[pcr-multilib]
2417#Include = /etc/pacman.d/mirrorlist
2418
2419# Parabola also supports another community projects and personal repositories, to
2420# find them check out this wiki page: https://wiki.parabola.nu/Repositories
2421
2422# An example of a custom package repository. See the pacman manpage for
2423# tips on creating your own repositories.
2424#[custom]
2425#SigLevel = Optional TrustAll
2426#Server = file:///home/custompkgs
2427
2428Include = /etc/pacman.d/*.conf
2429#+end_src
2430
2431*** mirrorlist
2432
2433#+begin_src conf :tangle /sudo::/etc/pacman.d/mirrorlist :comments none
2434# Parabola GNU/Linux-libre - Last Updated: Wed Dec 20 02:59:35 GMT 2017
2435
2436Server = http://mirror.fsf.org/parabola/$repo/os/$arch
2437Server = http://mirror.fsf.org/parabola/$repo/os/$arch
2438Server = http://mirror.fsf.org/parabola/$repo/os/$arch
2439Server = http://mirror.fsf.org/parabola/$repo/os/$arch
2440
2441# Location: London, UK
2442# Responsible: Parabola Project
2443# Note: Not really a mirror, automatically redirects you to an Arch
2444# mirror when possible. Works best specifying it a few times in a
2445# row (404s workaround).
2446# Server = http://redirector.parabola.nu/$repo/os/$arch
2447Server = https://redirector.parabola.nu/$repo/os/$arch
2448
2449# Location: Reykjavík, Iceland
2450# Responsible: Parabola Project
2451# Note: Not really a mirror, automatically redirects you to a Parabola
2452# mirror that has the file you are looking for.
2453# Server = http://repomirror.parabola.nu/$repo/os/$arch
2454Server = https://repomirror.parabola.nu/$repo/os/$arch
2455
2456# Location: Falkenstein, Germany
2457# Server = http://mirror.grapentin.org/parabola/$repo/os/$arch
2458Server = https://mirror.grapentin.org/parabola/$repo/os/$arch
2459
2460# Location: Volendam, Netherlands
2461Server = https://jeweet.net/repo/parabola/$repo/os/$arch
2462
2463# Location: Amsterdam, Netherlands
2464# Note: Not really a mirror, but a high-speed 10GiB cache for
2465# mirror.yandex.ru/mirrors/parabola
2466# Server = http://parabola.isacdaavid.info:8080/$repo/os/$arch
2467Server = https://parabola.isacdaavid.info:8081/$repo/os/$arch
2468
2469# Location: Moscow, Russian Federation
2470# Server = http://mirror.yandex.ru/mirrors/parabola/$repo/os/$arch
2471Server = https://mirror.yandex.ru/mirrors/parabola/$repo/os/$arch
2472
2473# Location: Ho Chi Minh City, Vietnam
2474# Server = http://mirror.freedif.org/Parabola/$repo/os/$arch
2475Server = https://mirror.freedif.org/Parabola/$repo/os/$arch
2476
2477# Location: Los Angeles, CA, USA
2478# Note: Also visit http://alfplayer.com/ for its SNAPSHOTS ARCHIVE
2479Server = http://alfplayer.com/parabola/$repo/os/$arch
2480
2481# Location: Boston, MA, USA
2482Server = http://mirror.fsf.org/parabola/$repo/os/$arch
2483
2484# Location: Austin, TX, USA
2485# Server = http://parabola.serverpit.com/
2486Server = https://parabola.serverpit.com/
2487
2488# Location: Reykjavík, Iceland
2489# Responsible: Parabola Project
2490# Note: Currently pointing to repomirror.parabola.nu
2491# Server = http://repo.parabola.nu/$repo/os/$arch
2492Server = https://repo.parabola.nu/$repo/os/$arch
2493#+end_src
2494
2495** pigeonhole
2496*** amin.sieve
2497:PROPERTIES:
2498:header-args+: :tangle ~/mail/bndl.org/amin/sieve/amin.sieve :comments none
2499:END:
2500
2501#+begin_src conf
2502require ["regex", "variables", "fileinto", "envelope",
2503 "mailbox", "imap4flags", "include"];
2504
2505# webmasters
2506if anyof (
2507 address :is "from" ["webmasters@gnu.org", "webmasters-comment@gnu.org"]) {
2508 fileinto :create "gnu.webmasters";
2509 stop;
2510}
2511
2512include :personal "lists";
2513#+end_src
2514
2515*** lists.sieve
2516:PROPERTIES:
2517:header-args+: :tangle ~/mail/bndl.org/amin/sieve/lists.sieve :comments none
2518:END:
2519
2520#+begin_src conf
2521require ["regex", "variables", "fileinto", "envelope",
2522 "mailbox", "imap4flags", "include"];
2523
2524# mailing lists
2525if anyof (
2526 header :contains "list-id"
2527 [ "<emacs-devel.gnu.org>"
2528 , "<emacs-orgmode.gnu.org>"
2529 , "<emacsconf-discuss.gnu.org>"
2530 , "<fencepost-users.gnu.org>"
2531 , "<guix-devel.gnu.org>"
2532 , "<guile-devel.gnu.org>"
2533 , "<help-gnu-emacs.gnu.org>"
2534 , "<info-gnu-emacs.gnu.org>"
2535 , "<info-guix.gnu.org>"
2536 , "<www-commits.gnu.org>"
2537 , "<www-discuss.gnu.org>"
2538 , "<deepspec.lists.cs.princeton.edu>"
2539 , "<haskell-cafe.haskell.org>"
2540 , "<haskell-art.we.lurk.org>"
2541 , "<notmuch.notmuchmail.org>"
2542 ] ) {
2543 if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
2544 set :lower "listname" "${1}";
2545 fileinto :create "gnu.${listname}";
2546 stop;
2547 }
2548}
2549
2550# sr.ht lists, with dots ('.') omitted
2551if anyof (
2552 header :contains "list-id"
2553 [ "<~bandali/public-inbox@lists.sr.ht>"
2554 , "<~sircmpwn/sr.ht-admins@lists.sr.ht>"
2555 , "<~sircmpwn/sr.ht-announce@lists.sr.ht>"
2556 , "<~sircmpwn/sr.ht-dev@lists.sr.ht>"
2557 , "<~sircmpwn/sr.ht-discuss@lists.sr.ht>"
2558 ] ) {
2559 if header :regex "list-id" "(~[a-z_0-9-]+)/([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)@" {
2560 set :lower "username" "${1}";
2561 set :lower "listname" "${2}${3}${4}${5}${6}${7}";
2562 fileinto :create "gnu.${username}.${listname}";
2563 stop;
2564 }
2565}
2566#+end_src
2567
2568** PowerTOP
2569:PROPERTIES:
2570:header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
2571:END:
2572
2573#+begin_src conf
2574[Unit]
2575Description=Powertop tunings
2576
2577[Service]
2578ExecStart=/usr/bin/powertop --auto-tune
2579RemainAfterExit=true
2580
2581[Install]
2582WantedBy=multi-user.target
2583#+end_src
2584
2585** redshift
2586:PROPERTIES:
2587:header-args+: :tangle ~/.config/redshift.conf :comments none
2588:END:
2589
2590#+begin_src conf
2591; Global settings for redshift
2592[redshift]
2593; Set the day and night screen temperatures (Neutral is 6500K)
2594;temp-day=5700
2595;temp-night=3500
2596
2597;temp-day=6500
2598temp-day=6200
2599;temp-night=4800
2600;temp-night=5000
2601;temp-night=4500
2602temp-night=4000
2603
2604; Enable/Disable a smooth transition between day and night
2605; 0 will cause a direct change from day to night screen temperature.
2606; 1 will gradually increase or decrease the screen temperature.
2607transition=1
2608
2609; Set the screen brightness. Default is 1.0.
2610;brightness=0.9
2611; It is also possible to use different settings for day and night
2612; since version 1.8.
2613;brightness-day=0.7
2614;brightness-night=0.4
2615; Set the screen gamma (for all colors, or each color channel
2616; individually)
2617;gamma=0.8
2618;gamma=1.0
2619;gamma=0.8:0.7:0.8
2620; This can also be set individually for day and night since
2621; version 1.10.
2622;gamma-day=0.8:0.7:0.8
2623;gamma-night=0.6
2624
2625; Set the location-provider: 'geoclue2' or 'manual'
2626; type 'redshift -l list' to see possible values.
2627; The location provider settings are in a different section.
2628;location-provider=manual
2629location-provider=geoclue2
2630
2631; Set the adjustment-method: 'randr', 'vidmode'
2632; type 'redshift -m list' to see all possible values.
2633; 'randr' is the preferred method, 'vidmode' is an older API.
2634; but works in some cases when 'randr' does not.
2635; The adjustment method settings are in a different section.
2636adjustment-method=randr
2637
2638; Configuration of the location-provider:
2639; type 'redshift -l PROVIDER:help' to see the settings.
2640; ex: 'redshift -l manual:help'
2641; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
2642; are negative numbers.
2643;[manual]
2644;lat=48.1
2645;lon=11.6
2646
2647; Configuration of the adjustment-method
2648; type 'redshift -m METHOD:help' to see the settings.
2649; ex: 'redshift -m randr:help'
2650; In this example, randr is configured to adjust screen 1.
2651; Note that the numbering starts from 0, so this is actually the
2652; second screen. If this option is not specified, Redshift will try
2653; to adjust _all_ screens.
2654;[randr]
2655;screen=1
2656#+end_src
2657
2658** rofi
2659:PROPERTIES:
2660:header-args+: :tangle ~/.config/rofi/config
2661:END:
2662
2663#+begin_src conf
2664! rofi.font: Ubuntu Mono 13
2665! rofi.font: Inconsolata 16
2666! rofi.font: Iosevka 13
2667! rofi.font: Source Code Pro 11
2668rofi.font: Source Code Pro 10.5
2669rofi.modi: run,window
2670! rofi.width: 640
2671rofi.width: 600
2672!rofi.location: 2
2673!rofi.yoffset: 200
2674rofi.monitor: -1
2675!rofi.lines: 10
2676
2677!rofi.theme: /usr/share/rofi/themes//Arc.rasi
2678!rofi.theme: /usr/share/rofi/themes//Paper.rasi
2679!rofi.theme: /usr/share/rofi/themes//sidebar.rasi
2680
2681rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
2682#+end_src
2683
2684** rofi-pass
2685:PROPERTIES:
2686:header-args+: :tangle ~/.config/rofi-pass/config
2687:END:
2688
2689#+begin_src conf
2690# permanently set alternative root dir
2691# root=/path/to/root
2692
2693# rofi command. Make sure to have "$@" as last argument
2694_rofi () {
2695 #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
2696 rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
2697}
2698
2699# xdotool needs the keyboard layout to be set using setxkbmap
2700# You can do this in your autostart scripts (e.g. xinitrc)
2701
2702# If for some reason, you cannot do this, you can set the command here.
2703# and set fix_layout to true
2704fix_layout=false
2705
2706layout_cmd () {
2707 setxkbmap us
2708}
2709
2710# fields to be used
2711URL_field='url'
2712USERNAME_field='user'
2713AUTOTYPE_field='autotype'
2714
2715# delay to be used for :delay keyword
2716delay=2
2717
2718## Programs to be used
2719# Editor
2720EDITOR='gvim -f'
2721
2722# Browser
2723BROWSER='chromium'
2724
2725## Misc settings
2726
2727default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
2728auto_enter='false'
2729notify='false'
2730default_autotype='user :tab pass'
2731
2732# color of the help messages
2733# leave empty for autodetection
2734help_color="#4872FF"
2735
2736# Clipboard settings
2737# Possible options: primary, clipboard, both
2738clip=primary
2739
2740# Options for generating new password entries
2741# default_user is also used for password files that have no user field.
2742default_user=aminb
2743default_user2=bandali
2744password_length=30
2745
2746# Custom Keybindings
2747#autotype="Alt+1"
2748autotype="Alt+m"
2749type_user="Alt+2"
2750type_pass="Alt+3"
2751open_url="Alt+4"
2752copy_name="Alt+u"
2753copy_url="Alt+l"
2754copy_pass="Alt+p"
2755show="Alt+o"
2756copy_entry="Alt+2"
2757type_entry="Alt+1"
2758copy_menu="Alt+c"
2759action_menu="Alt+a"
2760type_menu="Alt+t"
2761help="Alt+h"
2762switch="Alt+x"
2763insert_pass="Alt+n"
2764#+end_src
2765
2766** sway
2767
2768*** main
2769:PROPERTIES:
2770:header-args+: :tangle ~/.config/sway/config
2771:END:
2772
2773#+begin_src conf
2774### Variables
2775# super
2776set $mod Mod4
2777# alt
2778set $mod2 Mod1
2779set $left h
2780set $down j
2781set $up k
2782set $right l
2783set $term urxvt
2784set $menu rofi -show run -display-run '> ' -display-window ' 🗔 '
2785
2786### Output configuration
2787#
2788# Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/)
2789output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
2790#
2791# Example configuration:
2792#
2793# output HDMI-A-1 resolution 1920x1080 position 1920,0
2794#
2795# You can get the names of your outputs by running: swaymsg -t get_outputs
2796
2797### Idle configuration
2798
2799exec swayidle \
2800 timeout 120 '[ -f ~/.nosleep ] || swaymsg "output * dpms off"' \
2801 resume '[ -f ~/.nosleep ] || swaymsg "output * dpms on"' \
2802
2803
2804### Key bindings
2805#
2806# Basics:
2807#
2808 # start a terminal
2809 bindsym $mod+Return exec $term -name floating
2810 bindsym $mod+Shift+Return exec $term
2811 for_window [class="URxvt" instance="floating"] floating enable
2812
2813 # kill focused window
2814 bindsym $mod+Shift+q kill
2815
2816 # start your launcher
2817 bindsym $mod+d exec $menu
2818
2819 # password manager
2820 bindsym $mod2+space exec rofi-pass
2821
2822 # Drag floating windows by holding down $mod and left mouse button.
2823 # Resize them with right mouse button + $mod.
2824 # Despite the name, also works for non-floating windows.
2825 # Change normal to inverse to use left mouse button for resizing and right
2826 # mouse button for dragging.
2827 floating_modifier $mod normal
2828
2829 # reload the configuration file
2830 bindsym $mod+Shift+c reload
2831
2832 # exit sway (logs you out of your wayland session)
2833 # bindsym $mod+Shift+e exit
2834
2835 bindsym $mod+apostrophe exec rofi-light # rofi-based brightness chooser
2836 bindsym XF86MonBrightnessUp exec light -A 5 # increase screen brightness
2837 bindsym XF86MonBrightnessDown exec light -U 5 # decrease screen brightness
2838
2839 bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
2840 bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
2841 bindsym XF86AudioMute exec pamixer --toggle-mute
2842 bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
2843
2844 bindsym $mod+Shift+apostrophe exec rofi-remmina.py # choose remmina connection
2845
2846 # original sway workspace switch and window move
2847 bindsym $mod+bracketleft workspace prev
2848 bindsym $mod+bracketright workspace next
2849 bindsym $mod+braceleft move container to workspace prev
2850 bindsym $mod+braceright move container to workspace next
2851
2852 # bspwm-esque workspace switch and window move
2853 bindsym $mod2+bracketleft exec sway-ws-util switch prev
2854 bindsym $mod2+bracketright exec sway-ws-util switch next
2855 bindsym $mod2+braceleft exec sway-ws-util move prev follow
2856 bindsym $mod2+braceright exec sway-ws-util move next follow
2857#
2858# Moving around:
2859#
2860 # Move your focus around
2861 bindsym $mod+$left focus left
2862 bindsym $mod+$down focus down
2863 bindsym $mod+$up focus up
2864 bindsym $mod+$right focus right
2865 # or use $mod+[up|down|left|right]
2866 bindsym $mod+Left focus left
2867 bindsym $mod+Down focus down
2868 bindsym $mod+Up focus up
2869 bindsym $mod+Right focus right
2870
2871 # _move_ the focused window with the same, but add Shift
2872 bindsym $mod+Shift+$left move left
2873 bindsym $mod+Shift+$down move down
2874 bindsym $mod+Shift+$up move up
2875 bindsym $mod+Shift+$right move right
2876 # ditto, with arrow keys
2877 bindsym $mod+Shift+Left move left
2878 bindsym $mod+Shift+Down move down
2879 bindsym $mod+Shift+Up move up
2880 bindsym $mod+Shift+Right move right
2881#
2882# Workspaces:
2883#
2884 # switch to workspace
2885 bindsym $mod+1 workspace 1
2886 bindsym $mod+2 workspace 2
2887 bindsym $mod+3 workspace 3
2888 bindsym $mod+4 workspace 4
2889 bindsym $mod+5 workspace 5
2890 bindsym $mod+6 workspace 6
2891 bindsym $mod+7 workspace 7
2892 bindsym $mod+8 workspace 8
2893 bindsym $mod+9 workspace 9
2894 bindsym $mod+0 workspace 10
2895 # move focused container to workspace
2896 bindsym $mod+Shift+1 move container to workspace 1
2897 bindsym $mod+Shift+2 move container to workspace 2
2898 bindsym $mod+Shift+3 move container to workspace 3
2899 bindsym $mod+Shift+4 move container to workspace 4
2900 bindsym $mod+Shift+5 move container to workspace 5
2901 bindsym $mod+Shift+6 move container to workspace 6
2902 bindsym $mod+Shift+7 move container to workspace 7
2903 bindsym $mod+Shift+8 move container to workspace 8
2904 bindsym $mod+Shift+9 move container to workspace 9
2905 bindsym $mod+Shift+0 move container to workspace 10
2906 # Note: workspaces can have any name you want, not just numbers.
2907 # We just use 1-10 as the default.
2908#
2909# Layout stuff:
2910#
2911 # You can "split" the current object of your focus with
2912 # $mod+b or $mod+v, for horizontal and vertical splits
2913 # respectively.
2914 bindsym $mod+b splith
2915 bindsym $mod+v splitv
2916
2917 # Switch the current container between different layout styles
2918 bindsym $mod+s layout stacking
2919 bindsym $mod+w layout tabbed
2920 bindsym $mod+e layout toggle split
2921
2922 # Make the current focus fullscreen
2923 bindsym $mod+f fullscreen
2924
2925 # Toggle sticky-ness of the current (floating) window
2926 bindsym $mod+$mod2+space sticky toggle
2927
2928 # Toggle the current focus between tiling and floating mode
2929 bindsym $mod+Shift+space floating toggle
2930
2931 # Swap focus between the tiling area and the floating area
2932 bindsym $mod+space focus mode_toggle
2933
2934 # move focus to the parent container
2935 bindsym $mod+a focus parent
2936#
2937# Scratchpad:
2938#
2939 # Sway has a "scratchpad", which is a bag of holding for windows.
2940 # You can send windows there and get them back later.
2941
2942 # Move the currently focused window to the scratchpad
2943 bindsym $mod+Shift+minus move scratchpad
2944
2945 # Show the next scratchpad window or hide the focused scratchpad window.
2946 # If there are multiple scratchpad windows, this command cycles through them.
2947 bindsym $mod+minus scratchpad show
2948#
2949# Resizing containers:
2950#
2951mode "resize" {
2952 # left will shrink the containers width
2953 # right will grow the containers width
2954 # up will shrink the containers height
2955 # down will grow the containers height
2956 bindsym $left resize shrink width 10px
2957 bindsym $down resize grow height 10px
2958 bindsym $up resize shrink height 10px
2959 bindsym $right resize grow width 10px
2960
2961 # ditto, with arrow keys
2962 bindsym Left resize shrink width 10px
2963 bindsym Down resize grow height 10px
2964 bindsym Up resize shrink height 10px
2965 bindsym Right resize grow width 10px
2966
2967 # return to default mode
2968 bindsym Return mode "default"
2969 bindsym Escape mode "default"
2970}
2971bindsym $mod+Shift+r mode "resize"
2972
2973#
2974# Power button
2975#
2976
2977set $mode_system System (l)ock, (e)xit sway, (s)uspend, (h)ibernate, (r)eboot, (S)hutdown
2978mode "$mode_system" {
2979 bindsym l exec swaylock, mode "default"
2980 bindsym e exec swaymsg exit, mode "default"
2981 bindsym s exec systemctl suspend, mode "default"
2982 bindsym h exec systemctl hibernate, mode "default"
2983 bindsym r exec systemctl reboot, mode "default"
2984 bindsym Shift+s exec systemctl poweroff -i, mode "default"
2985
2986 # back to normal: Enter, Escape, or q
2987 bindsym Return mode "default"
2988 bindsym Escape mode "default"
2989 bindsym q mode "default"
2990}
2991# bindsym XF86PowerOff mode "$mode_system"
2992bindsym $mod+Shift+e mode "$mode_system"
2993
2994#
2995# Presentation mode
2996#
2997
2998bindsym $mod+$mod2+p exec ([ ! -e ~/.nosleep ] && touch ~/.nosleep || rm ~/.nosleep) && killall -USR1 i3status
2999
3000#
3001# Notifications
3002#
3003
3004bindsym $mod+Shift+n mode notifications
3005mode notifications {
3006 bindsym Return exec makoctl invoke; exec makoctl dismiss; mode default
3007 bindsym d exec makoctl dismiss; mode default
3008 bindsym Shift+d exec makoctl dismiss -a; mode default
3009
3010 bindsym Escape mode default
3011 bindsym q mode default
3012}
3013
3014#
3015# Screenshotting
3016#
3017
3018bindsym $mod+Shift+s mode screenshot
3019mode screenshot {
3020 bindsym a exec grim $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
3021 bindsym r exec slurp | grim -g - $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
3022
3023 bindsym Escape mode default
3024 bindsym q mode default
3025}
3026
3027#
3028# Window configurations
3029#
3030for_window [class="mpv"] floating enable
3031for_window [class="TelegramDesktop"] floating enable
3032for_window [app_id="pavucontrol"] floating enable
3033for_window [app_id="meld"] floating enable
3034for_window [app_id="nm-connection-editor"] floating enable
3035
3036#
3037# Status Bar:
3038#
3039# Read `man 5 sway-bar` for more information about this section.
3040bar {
3041 position bottom
3042 colors {
3043 statusline #ffffff
3044 background #212121
3045 inactive_workspace #21212100 #21212100 #5c5c5c
3046 }
3047 status_command i3status | my-i3status.py
3048}
3049
3050# font pango: benis uushi 9
3051# font pango: Ubuntu Mono 11
3052# font pango: Inconsolata 11
3053font pango: DejaVu Sans Mono 9
3054# font pango: Liberation Mono 9
3055
3056exec xrdb .Xresources
3057# exec pgrep -x "systemd-inhibit" || \
3058# systemd-inhibit --what=handle-power-key --who=aminb \
3059# --why="Handle power button in sway" sleep infinity
3060exec mako 2>&1 >/tmp/mako.log
3061exec /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
3062
3063include /etc/sway/config.d/*
3064include ~/.config/sway/`hostname`
3065
3066exec systemd-notify --ready || true
3067
3068#+end_src
3069
3070*** langa
3071:PROPERTIES:
3072:header-args+: :tangle ~/.config/sway/langa
3073:END:
3074
3075#+begin_src conf
3076input "2:7:SynPS/2_Synaptics_TouchPad" {
3077 events disabled
3078 dwt enabled
3079 tap enabled
3080 natural_scroll enabled
3081 click_method clickfinger
3082}
3083
3084input "1:1:AT_Translated_Set_2_keyboard" {
3085 repeat_delay 200
3086 repeat_rate 45
3087 xkb_layout us_ab,ir
3088 xkb_options ctrl:nocaps,altwin:swap_alt_win,grp:shifts_toggle
3089}
3090#+end_src
3091
3092*** shemshak
3093:PROPERTIES:
3094:header-args+: :tangle ~/.config/sway/shemshak
3095:END:
3096
3097#+begin_src conf
3098input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
3099 dwt enabled
3100 tap enabled
3101 natural_scroll enabled
3102 middle_emulation enabled
3103 click_method clickfinger
3104}
3105
3106input "1:1:AT_Translated_Set_2_keyboard" {
3107 repeat_delay 200
3108 repeat_rate 45
3109 xkb_layout us,ir
3110 xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
3111}
3112#+end_src
3113** swaylock
3114:PROPERTIES:
3115:header-args+: :tangle ~/.config/swaylock/config
3116:END:
3117
3118#+begin_src conf
3119image=/home/amin/usr/pics/wp/wp2445784-blurred-wallpapers.jpg
3120scaling=fill
3121#+end_src
3122** systemd
3123
3124Keep boot messages on tty1 (see [[https://wiki.archlinux.org/index.php/getty#Have_boot_messages_stay_on_tty1][here]])
3125
3126#+begin_src conf :tangle /sudo::/etc/systemd/system/getty@tty1.service.d/noclear.conf
3127[Service]
3128TTYVTDisallocate=no
3129#+end_src
3130
3131** TLP
3132
3133*** langa
3134
3135#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "langa")) "/sudo::/etc/default/tlp")
3136# ------------------------------------------------------------------------------
3137# tlp - Parameters for power saving
3138# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
3139
3140# Hint: some features are disabled by default, remove the leading # to enable
3141# them.
3142
3143# Set to 0 to disable, 1 to enable TLP.
3144TLP_ENABLE=1
3145
3146# Operation mode when no power supply can be detected: AC, BAT.
3147# Concerns some desktop and embedded hardware only.
3148TLP_DEFAULT_MODE=AC
3149
3150# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
3151# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
3152TLP_PERSISTENT_DEFAULT=0
3153
3154# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
3155# Non-zero value enables, zero disables laptop mode.
3156DISK_IDLE_SECS_ON_AC=0
3157DISK_IDLE_SECS_ON_BAT=2
3158
3159# Dirty page values (timeouts in secs).
3160MAX_LOST_WORK_SECS_ON_AC=15
3161MAX_LOST_WORK_SECS_ON_BAT=60
3162
3163# Hint: CPU parameters below are disabled by default, remove the leading #
3164# to enable them, otherwise kernel default values are used.
3165
3166# Select a CPU frequency scaling governor.
3167# Intel Core i processor with intel_pstate driver:
3168# powersave(*), performance.
3169# Older hardware with acpi-cpufreq driver:
3170# ondemand(*), powersave, performance, conservative, schedutil.
3171# (*) is recommended.
3172# Hint: use tlp-stat -p to show the active driver and available governors.
3173# Important:
3174# powersave for intel_pstate and ondemand for acpi-cpufreq are power
3175# efficient for *almost all* workloads and therefore kernel and most
3176# distributions have chosen them as defaults. If you still want to change,
3177# you should know what you're doing! You *must* disable your distribution's
3178# governor settings or conflicts will occur.
3179#CPU_SCALING_GOVERNOR_ON_AC=powersave
3180#CPU_SCALING_GOVERNOR_ON_BAT=powersave
3181
3182# Set the min/max frequency available for the scaling governor.
3183# Possible values strongly depend on your CPU. For available frequencies see
3184# the output of tlp-stat -p.
3185#CPU_SCALING_MIN_FREQ_ON_AC=0
3186#CPU_SCALING_MAX_FREQ_ON_AC=0
3187#CPU_SCALING_MIN_FREQ_ON_BAT=0
3188#CPU_SCALING_MAX_FREQ_ON_BAT=0
3189
3190# Set energy performance hints (HWP) for Intel P-state governor:
3191# performance, balance_performance, default, balance_power, power
3192# Values are given in order of increasing power saving.
3193# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
3194CPU_HWP_ON_AC=balance_performance
3195CPU_HWP_ON_BAT=balance_power
3196
3197# Set Intel P-state performance: 0..100 (%).
3198# Limit the max/min P-state to control the power dissipation of the CPU.
3199# Values are stated as a percentage of the available performance.
3200# Requires an Intel Core i processor with intel_pstate driver.
3201#CPU_MIN_PERF_ON_AC=0
3202#CPU_MAX_PERF_ON_AC=100
3203#CPU_MIN_PERF_ON_BAT=0
3204#CPU_MAX_PERF_ON_BAT=30
3205
3206# Set the CPU "turbo boost" feature: 0=disable, 1=allow
3207# Requires an Intel Core i processor.
3208# Important:
3209# - This may conflict with your distribution's governor settings
3210# - A value of 1 does *not* activate boosting, it just allows it
3211#CPU_BOOST_ON_AC=1
3212#CPU_BOOST_ON_BAT=0
3213
3214# Minimize number of used CPU cores/hyper-threads under light load conditions:
3215# 0=disable, 1=enable.
3216SCHED_POWERSAVE_ON_AC=0
3217SCHED_POWERSAVE_ON_BAT=1
3218
3219# Kernel NMI Watchdog:
3220# 0=disable (default, saves power), 1=enable (for kernel debugging only).
3221NMI_WATCHDOG=0
3222
3223# Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
3224# Frequency voltage pairs are written to:
3225# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
3226# CAUTION: only use this, if you thoroughly understand what you are doing!
3227#PHC_CONTROLS="F:V F:V F:V F:V"
3228
3229# Set CPU performance versus energy savings policy:
3230# performance, balance-performance, default, balance-power, power.
3231# Values are given in order of increasing power saving.
3232# Requires kernel module msr and x86_energy_perf_policy from linux-tools.
3233ENERGY_PERF_POLICY_ON_AC=performance
3234ENERGY_PERF_POLICY_ON_BAT=balance-power
3235
3236# Disk devices; separate multiple devices with spaces (default: sda).
3237# Devices can be specified by disk ID also (lookup with: tlp diskid).
3238DISK_DEVICES="sda sdb"
3239
3240# Disk advanced power management level: 1..254, 255 (max saving, min, off).
3241# Levels 1..127 may spin down the disk; 255 allowable on most drives.
3242# Separate values for multiple disks with spaces. Use the special value 'keep'
3243# to keep the hardware default for the particular disk.
3244DISK_APM_LEVEL_ON_AC="254 254"
3245DISK_APM_LEVEL_ON_BAT="128 128"
3246
3247# Hard disk spin down timeout:
3248# 0: spin down disabled
3249# 1..240: timeouts from 5s to 20min (in units of 5s)
3250# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
3251# See 'man hdparm' for details.
3252# Separate values for multiple disks with spaces. Use the special value 'keep'
3253# to keep the hardware default for the particular disk.
3254#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
3255#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
3256
3257# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
3258# Separate values for multiple disks with spaces. Use the special value 'keep'
3259# to keep the kernel default scheduler for the particular disk.
3260#DISK_IOSCHED="cfq cfq"
3261
3262# AHCI link power management (ALPM) for disk devices:
3263# min_power, med_power_with_dipm(*), medium_power, max_performance.
3264# (*) Kernel >= 4.15 required, then recommended.
3265# Multiple values separated with spaces are tried sequentially until success.
3266SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
3267SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
3268
3269# Exclude host devices from AHCI link power management.
3270# Separate multiple hosts with spaces.
3271#SATA_LINKPWR_BLACKLIST="host1"
3272
3273# Runtime Power Management for AHCI host and disks devices:
3274# on=disable, auto=enable.
3275# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
3276#AHCI_RUNTIME_PM_ON_AC=on
3277#AHCI_RUNTIME_PM_ON_BAT=on
3278
3279# Seconds of inactivity before disk is suspended.
3280AHCI_RUNTIME_PM_TIMEOUT=15
3281
3282# PCI Express Active State Power Management (PCIe ASPM):
3283# default, performance, powersave.
3284PCIE_ASPM_ON_AC=performance
3285PCIE_ASPM_ON_BAT=powersave
3286
3287# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
3288# auto = mid on BAT, high on AC; default = use hardware defaults.
3289RADEON_POWER_PROFILE_ON_AC=high
3290RADEON_POWER_PROFILE_ON_BAT=low
3291
3292# Radeon dynamic power management method (DPM): battery, performance.
3293RADEON_DPM_STATE_ON_AC=performance
3294RADEON_DPM_STATE_ON_BAT=battery
3295
3296# Radeon DPM performance level: auto, low, high; auto is recommended.
3297RADEON_DPM_PERF_LEVEL_ON_AC=auto
3298RADEON_DPM_PERF_LEVEL_ON_BAT=auto
3299
3300# WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
3301WIFI_PWR_ON_AC=off
3302WIFI_PWR_ON_BAT=on
3303
3304# Disable wake on LAN: Y/N.
3305WOL_DISABLE=Y
3306
3307# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
3308# A value of 0 disables, >=1 enables power saving (recommended: 1).
3309SOUND_POWER_SAVE_ON_AC=0
3310SOUND_POWER_SAVE_ON_BAT=0
3311
3312# Disable controller too (HDA only): Y/N.
3313SOUND_POWER_SAVE_CONTROLLER=N
3314
3315# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
3316# Drive can be powered on again by releasing (and reinserting) the eject lever
3317# or by pressing the disc eject button on newer models.
3318# Note: an UltraBay/MediaBay hard disk is never powered off.
3319BAY_POWEROFF_ON_AC=0
3320BAY_POWEROFF_ON_BAT=0
3321# Optical drive device to power off (default sr0).
3322BAY_DEVICE="sr0"
3323
3324# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
3325RUNTIME_PM_ON_AC=on
3326RUNTIME_PM_ON_BAT=auto
3327
3328# Exclude PCI(e) device adresses the following list from Runtime PM
3329# (separate with spaces). Use lspci to get the adresses (1st column).
3330#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
3331
3332# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
3333# Default when unconfigured is "amdgpu nouveau nvidia radeon" which
3334# prevents accidential power-on of dGPU in hybrid graphics setups.
3335# Use "" to disable the feature completely.
3336# Separate multiple drivers with spaces.
3337#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
3338
3339# Set to 0 to disable, 1 to enable USB autosuspend feature.
3340USB_AUTOSUSPEND=1
3341
3342# Exclude listed devices from USB autosuspend (separate with spaces).
3343# Use lsusb to get the ids.
3344# Note: input devices (usbhid) are excluded automatically
3345#USB_BLACKLIST="1111:2222 3333:4444"
3346
3347# Bluetooth devices are excluded from USB autosuspend:
3348# 0=do not exclude, 1=exclude.
3349USB_BLACKLIST_BTUSB=0
3350
3351# Phone devices are excluded from USB autosuspend:
3352# 0=do not exclude, 1=exclude (enable charging).
3353USB_BLACKLIST_PHONE=0
3354
3355# Printers are excluded from USB autosuspend:
3356# 0=do not exclude, 1=exclude.
3357USB_BLACKLIST_PRINTER=1
3358
3359# WWAN devices are excluded from USB autosuspend:
3360# 0=do not exclude, 1=exclude.
3361USB_BLACKLIST_WWAN=1
3362
3363# Include listed devices into USB autosuspend even if already excluded
3364# by the blacklists above (separate with spaces).
3365# Use lsusb to get the ids.
3366#USB_WHITELIST="1111:2222 3333:4444"
3367
3368# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
3369# (workaround for USB devices that cause shutdown problems).
3370#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
3371
3372# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
3373# on system startup: 0=disable, 1=enable.
3374# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
3375# are ignored when this is enabled!
3376#RESTORE_DEVICE_STATE_ON_STARTUP=0
3377RESTORE_DEVICE_STATE_ON_STARTUP=1
3378
3379# Radio devices to disable on startup: bluetooth, wifi, wwan.
3380# Separate multiple devices with spaces.
3381#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
3382
3383# Radio devices to enable on startup: bluetooth, wifi, wwan.
3384# Separate multiple devices with spaces.
3385#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
3386
3387# Radio devices to disable on shutdown: bluetooth, wifi, wwan.
3388# (workaround for devices that are blocking shutdown).
3389#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
3390
3391# Radio devices to enable on shutdown: bluetooth, wifi, wwan.
3392# (to prevent other operating systems from missing radios).
3393#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
3394
3395# Radio devices to enable on AC: bluetooth, wifi, wwan.
3396#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
3397
3398# Radio devices to disable on battery: bluetooth, wifi, wwan.
3399#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
3400DEVICES_TO_DISABLE_ON_BAT="bluetooth"
3401
3402# Radio devices to disable on battery when not in use (not connected):
3403# bluetooth, wifi, wwan.
3404#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
3405
3406# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
3407# required). Charging starts when the remaining capacity falls below the
3408# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
3409# Main / Internal battery (values in %)
3410#START_CHARGE_THRESH_BAT0=75
3411#STOP_CHARGE_THRESH_BAT0=80
3412# Ultrabay / Slice / Replaceable battery (values in %)
3413#START_CHARGE_THRESH_BAT1=75
3414#STOP_CHARGE_THRESH_BAT1=80
3415
3416# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
3417#RESTORE_THRESHOLDS_ON_BAT=1
3418
3419# ------------------------------------------------------------------------------
3420# tlp-rdw - Parameters for the radio device wizard
3421# Possible devices: bluetooth, wifi, wwan.
3422
3423# Hints:
3424# - Parameters are disabled by default, remove the leading # to enable them
3425# - Separate multiple radio devices with spaces
3426
3427# Radio devices to disable on connect.
3428#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
3429#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
3430#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
3431
3432# Radio devices to enable on disconnect.
3433#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
3434#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
3435#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
3436
3437# Radio devices to enable/disable when docked.
3438#DEVICES_TO_ENABLE_ON_DOCK=""
3439#DEVICES_TO_DISABLE_ON_DOCK=""
3440
3441# Radio devices to enable/disable when undocked.
3442#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
3443#DEVICES_TO_DISABLE_ON_UNDOCK=""
3444#+end_src
3445
3446*** shemshak
3447
3448#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "shemshak")) "/sudo::/etc/default/tlp")
3449# ------------------------------------------------------------------------------
3450# tlp - Parameters for power saving
3451# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
3452
3453# Hint: some features are disabled by default, remove the leading # to enable
3454# them.
3455
3456# Set to 0 to disable, 1 to enable TLP.
3457TLP_ENABLE=1
3458
3459# Operation mode when no power supply can be detected: AC, BAT.
3460# Concerns some desktop and embedded hardware only.
3461TLP_DEFAULT_MODE=AC
3462
3463# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
3464# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
3465TLP_PERSISTENT_DEFAULT=0
3466
3467# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
3468# Non-zero value enables, zero disables laptop mode.
3469DISK_IDLE_SECS_ON_AC=0
3470DISK_IDLE_SECS_ON_BAT=2
3471
3472# Dirty page values (timeouts in secs).
3473MAX_LOST_WORK_SECS_ON_AC=15
3474MAX_LOST_WORK_SECS_ON_BAT=60
3475
3476# Hint: CPU parameters below are disabled by default, remove the leading #
3477# to enable them, otherwise kernel default values are used.
3478
3479# Select a CPU frequency scaling governor.
3480# Intel Core i processor with intel_pstate driver:
3481# powersave(*), performance.
3482# Older hardware with acpi-cpufreq driver:
3483# ondemand(*), powersave, performance, conservative, schedutil.
3484# (*) is recommended.
3485# Hint: use tlp-stat -p to show the active driver and available governors.
3486# Important:
3487# powersave for intel_pstate and ondemand for acpi-cpufreq are power
3488# efficient for *almost all* workloads and therefore kernel and most
3489# distributions have chosen them as defaults. If you still want to change,
3490# you should know what you're doing! You *must* disable your distribution's
3491# governor settings or conflicts will occur.
3492#CPU_SCALING_GOVERNOR_ON_AC=powersave
3493#CPU_SCALING_GOVERNOR_ON_BAT=powersave
3494
3495# Set the min/max frequency available for the scaling governor.
3496# Possible values strongly depend on your CPU. For available frequencies see
3497# the output of tlp-stat -p.
3498#CPU_SCALING_MIN_FREQ_ON_AC=0
3499#CPU_SCALING_MAX_FREQ_ON_AC=0
3500#CPU_SCALING_MIN_FREQ_ON_BAT=0
3501#CPU_SCALING_MAX_FREQ_ON_BAT=0
3502
3503# Set energy performance hints (HWP) for Intel P-state governor:
3504# performance, balance_performance, default, balance_power, power
3505# Values are given in order of increasing power saving.
3506# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
3507CPU_HWP_ON_AC=balance_performance
3508CPU_HWP_ON_BAT=balance_power
3509
3510# Set Intel P-state performance: 0..100 (%).
3511# Limit the max/min P-state to control the power dissipation of the CPU.
3512# Values are stated as a percentage of the available performance.
3513# Requires an Intel Core i processor with intel_pstate driver.
3514#CPU_MIN_PERF_ON_AC=0
3515#CPU_MAX_PERF_ON_AC=100
3516#CPU_MIN_PERF_ON_BAT=0
3517#CPU_MAX_PERF_ON_BAT=30
3518
3519# Set the CPU "turbo boost" feature: 0=disable, 1=allow
3520# Requires an Intel Core i processor.
3521# Important:
3522# - This may conflict with your distribution's governor settings
3523# - A value of 1 does *not* activate boosting, it just allows it
3524#CPU_BOOST_ON_AC=1
3525#CPU_BOOST_ON_BAT=0
3526
3527# Minimize number of used CPU cores/hyper-threads under light load conditions:
3528# 0=disable, 1=enable.
3529SCHED_POWERSAVE_ON_AC=0
3530SCHED_POWERSAVE_ON_BAT=1
3531
3532# Kernel NMI Watchdog:
3533# 0=disable (default, saves power), 1=enable (for kernel debugging only).
3534NMI_WATCHDOG=0
3535
3536# Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
3537# Frequency voltage pairs are written to:
3538# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
3539# CAUTION: only use this, if you thoroughly understand what you are doing!
3540#PHC_CONTROLS="F:V F:V F:V F:V"
3541
3542# Set CPU performance versus energy savings policy:
3543# performance, balance-performance, default, balance-power, power.
3544# Values are given in order of increasing power saving.
3545# Requires kernel module msr and x86_energy_perf_policy from linux-tools.
3546ENERGY_PERF_POLICY_ON_AC=performance
3547ENERGY_PERF_POLICY_ON_BAT=balance-power
3548
3549# Disk devices; separate multiple devices with spaces (default: sda).
3550# Devices can be specified by disk ID also (lookup with: tlp diskid).
3551DISK_DEVICES="sda sdb"
3552
3553# Disk advanced power management level: 1..254, 255 (max saving, min, off).
3554# Levels 1..127 may spin down the disk; 255 allowable on most drives.
3555# Separate values for multiple disks with spaces. Use the special value 'keep'
3556# to keep the hardware default for the particular disk.
3557DISK_APM_LEVEL_ON_AC="254 254"
3558DISK_APM_LEVEL_ON_BAT="128 128"
3559
3560# Hard disk spin down timeout:
3561# 0: spin down disabled
3562# 1..240: timeouts from 5s to 20min (in units of 5s)
3563# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
3564# See 'man hdparm' for details.
3565# Separate values for multiple disks with spaces. Use the special value 'keep'
3566# to keep the hardware default for the particular disk.
3567#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
3568#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
3569
3570# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
3571# Separate values for multiple disks with spaces. Use the special value 'keep'
3572# to keep the kernel default scheduler for the particular disk.
3573#DISK_IOSCHED="cfq cfq"
3574
3575# AHCI link power management (ALPM) for disk devices:
3576# min_power, med_power_with_dipm(*), medium_power, max_performance.
3577# (*) Kernel >= 4.15 required, then recommended.
3578# Multiple values separated with spaces are tried sequentially until success.
3579SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
3580SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
3581
3582# Exclude host devices from AHCI link power management.
3583# Separate multiple hosts with spaces.
3584#SATA_LINKPWR_BLACKLIST="host1"
3585
3586# Runtime Power Management for AHCI host and disks devices:
3587# on=disable, auto=enable.
3588# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
3589#AHCI_RUNTIME_PM_ON_AC=on
3590#AHCI_RUNTIME_PM_ON_BAT=on
3591
3592# Seconds of inactivity before disk is suspended.
3593AHCI_RUNTIME_PM_TIMEOUT=15
3594
3595# PCI Express Active State Power Management (PCIe ASPM):
3596# default, performance, powersave.
3597PCIE_ASPM_ON_AC=performance
3598PCIE_ASPM_ON_BAT=powersave
3599
3600# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
3601# auto = mid on BAT, high on AC; default = use hardware defaults.
3602RADEON_POWER_PROFILE_ON_AC=high
3603RADEON_POWER_PROFILE_ON_BAT=low
3604
3605# Radeon dynamic power management method (DPM): battery, performance.
3606RADEON_DPM_STATE_ON_AC=performance
3607RADEON_DPM_STATE_ON_BAT=battery
3608
3609# Radeon DPM performance level: auto, low, high; auto is recommended.
3610RADEON_DPM_PERF_LEVEL_ON_AC=auto
3611RADEON_DPM_PERF_LEVEL_ON_BAT=auto
3612
3613# WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
3614WIFI_PWR_ON_AC=off
3615WIFI_PWR_ON_BAT=on
3616
3617# Disable wake on LAN: Y/N.
3618WOL_DISABLE=Y
3619
3620# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
3621# A value of 0 disables, >=1 enables power saving (recommended: 1).
3622SOUND_POWER_SAVE_ON_AC=0
3623SOUND_POWER_SAVE_ON_BAT=0
3624
3625# Disable controller too (HDA only): Y/N.
3626SOUND_POWER_SAVE_CONTROLLER=N
3627
3628# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
3629# Drive can be powered on again by releasing (and reinserting) the eject lever
3630# or by pressing the disc eject button on newer models.
3631# Note: an UltraBay/MediaBay hard disk is never powered off.
3632BAY_POWEROFF_ON_AC=0
3633BAY_POWEROFF_ON_BAT=0
3634# Optical drive device to power off (default sr0).
3635BAY_DEVICE="sr0"
3636
3637# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
3638RUNTIME_PM_ON_AC=on
3639RUNTIME_PM_ON_BAT=auto
3640
3641# Exclude PCI(e) device adresses the following list from Runtime PM
3642# (separate with spaces). Use lspci to get the adresses (1st column).
3643#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
3644RUNTIME_PM_BLACKLIST="01:00.0"
3645
3646# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
3647# Default when unconfigured is "amdgpu nouveau nvidia radeon" which
3648# prevents accidential power-on of dGPU in hybrid graphics setups.
3649# Use "" to disable the feature completely.
3650# Separate multiple drivers with spaces.
3651#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
3652
3653# Set to 0 to disable, 1 to enable USB autosuspend feature.
3654USB_AUTOSUSPEND=1
3655
3656# Exclude listed devices from USB autosuspend (separate with spaces).
3657# Use lsusb to get the ids.
3658# Note: input devices (usbhid) are excluded automatically
3659#USB_BLACKLIST="1111:2222 3333:4444"
3660
3661# Bluetooth devices are excluded from USB autosuspend:
3662# 0=do not exclude, 1=exclude.
3663USB_BLACKLIST_BTUSB=0
3664
3665# Phone devices are excluded from USB autosuspend:
3666# 0=do not exclude, 1=exclude (enable charging).
3667USB_BLACKLIST_PHONE=0
3668
3669# Printers are excluded from USB autosuspend:
3670# 0=do not exclude, 1=exclude.
3671USB_BLACKLIST_PRINTER=1
3672
3673# WWAN devices are excluded from USB autosuspend:
3674# 0=do not exclude, 1=exclude.
3675USB_BLACKLIST_WWAN=1
3676
3677# Include listed devices into USB autosuspend even if already excluded
3678# by the blacklists above (separate with spaces).
3679# Use lsusb to get the ids.
3680#USB_WHITELIST="1111:2222 3333:4444"
3681
3682# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
3683# (workaround for USB devices that cause shutdown problems).
3684#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
3685
3686# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
3687# on system startup: 0=disable, 1=enable.
3688# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
3689# are ignored when this is enabled!
3690#RESTORE_DEVICE_STATE_ON_STARTUP=0
3691RESTORE_DEVICE_STATE_ON_STARTUP=1
3692
3693# Radio devices to disable on startup: bluetooth, wifi, wwan.
3694# Separate multiple devices with spaces.
3695#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
3696
3697# Radio devices to enable on startup: bluetooth, wifi, wwan.
3698# Separate multiple devices with spaces.
3699#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
3700
3701# Radio devices to disable on shutdown: bluetooth, wifi, wwan.
3702# (workaround for devices that are blocking shutdown).
3703#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
3704
3705# Radio devices to enable on shutdown: bluetooth, wifi, wwan.
3706# (to prevent other operating systems from missing radios).
3707#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
3708
3709# Radio devices to enable on AC: bluetooth, wifi, wwan.
3710#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
3711
3712# Radio devices to disable on battery: bluetooth, wifi, wwan.
3713#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
3714
3715# Radio devices to disable on battery when not in use (not connected):
3716# bluetooth, wifi, wwan.
3717#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
3718
3719# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
3720# required). Charging starts when the remaining capacity falls below the
3721# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
3722# Main / Internal battery (values in %)
3723#START_CHARGE_THRESH_BAT0=75
3724#STOP_CHARGE_THRESH_BAT0=80
3725# Ultrabay / Slice / Replaceable battery (values in %)
3726#START_CHARGE_THRESH_BAT1=75
3727#STOP_CHARGE_THRESH_BAT1=80
3728
3729# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
3730#RESTORE_THRESHOLDS_ON_BAT=1
3731
3732# ------------------------------------------------------------------------------
3733# tlp-rdw - Parameters for the radio device wizard
3734# Possible devices: bluetooth, wifi, wwan.
3735
3736# Hints:
3737# - Parameters are disabled by default, remove the leading # to enable them
3738# - Separate multiple radio devices with spaces
3739
3740# Radio devices to disable on connect.
3741#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
3742#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
3743#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
3744
3745# Radio devices to enable on disconnect.
3746#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
3747#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
3748#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
3749
3750# Radio devices to enable/disable when docked.
3751#DEVICES_TO_ENABLE_ON_DOCK=""
3752#DEVICES_TO_DISABLE_ON_DOCK=""
3753
3754# Radio devices to enable/disable when undocked.
3755#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
3756#DEVICES_TO_DISABLE_ON_UNDOCK=""
3757#+end_src
3758
3759** X
3760
3761*** xprofile
3762:PROPERTIES:
3763:header-args+: :tangle ~/.xprofile
3764:END:
3765
3766=~/.xprofile= is similar in style to =~/.xinitrc=, but on the
3767contrary, it's automatically sourced by LightDM, my display manager of
3768choice.
3769
3770#+begin_src sh :tangle no
3771xset -b # disable bell
3772xset r rate 200 45 # repeat delay (ms) and rate (repeats/sec)
3773
3774# setxkbmap -option compose:ralt
3775
3776setxkbmap -option ctrl:nocaps # turn capslock into control
3777setxkbmap -option altwin:swap_alt_win # swap alt and super
3778
3779if [ $(hostname) = "plasma" ]
3780then
3781 setxkbmap -option ctrl:rctrl_ralt # turn right control into right alt
3782fi
3783
3784if [ $(hostname) = "enigma" ]
3785then
3786 xmodmap -e "keycode 135 = Alt_R" # remap menu key to alt
3787fi
3788
3789light -Scrs "intel_backlight" 2
3790
3791source $HOME/.zprofile
3792
3793export _JAVA_AWT_WM_NONREPARENTING=1
3794export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
3795
3796if [ $(hostname) = "plasma" ]
3797then
3798 unlock-def-gk.py &
3799fi
3800
3801bspwm &
3802#+end_src
3803
3804*** X resources
3805
3806**** Xresources
3807:PROPERTIES:
3808:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
3809:END:
3810
3811#+begin_src conf-xdefaults
3812#include ".Xresources.d/fonts"
3813! #include ".Xresources.d/colors"
3814#include ".Xresources.d/emacs"
3815#include ".Xresources.d/rxvt-unicode"
3816#+end_src
3817
3818**** Xresources.d
3819
3820***** fonts
3821:PROPERTIES:
3822:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
3823:END:
3824
3825#+begin_src conf-xdefaults
3826Xft.lcdfilter: lcddefault
3827Xft.antialias: true
3828Xft.autohint: 0
3829Xft.hinting: true
3830Xft.hintstyle: hintslight
3831! Xft.hintstyle: hintfull
3832Xft.rgba: rgb
3833Xft.dpi: 96
3834#+end_src
3835
3836***** colors
3837:PROPERTIES:
3838:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
3839:END:
3840
3841#+begin_src conf-xdefaults :tangle no
3842#include "gruvbox-light.xresources"
3843! #include "gruvbox-dark.xresources"
3844#include "gruvbox-urxvt256.xresources"
3845#+end_src
3846
3847#+begin_src conf-xdefaults :tangle no
3848! -----------------------------------------------------------------------------
3849! File: gruvbox-light.xresources
3850! Description: Retro groove colorscheme generalized
3851! Author: morhetz <morhetz@gmail.com>
3852! Source: https://github.com/morhetz/gruvbox-generalized
3853! Last Modified: 6 Sep 2014
3854! -----------------------------------------------------------------------------
3855
3856! hard contrast: *background: #f9f5d7
3857*background: #fbf1c7
3858! soft contrast: *background: #f2e5bc
3859*foreground: #3c3836
3860! Black + DarkGrey
3861*color0: #fdf4c1
3862*color8: #928374
3863! DarkRed + Red
3864*color1: #cc241d
3865*color9: #9d0006
3866! DarkGreen + Green
3867*color2: #98971a
3868*color10: #79740e
3869! DarkYellow + Yellow
3870*color3: #d79921
3871*color11: #b57614
3872! DarkBlue + Blue
3873*color4: #458588
3874*color12: #076678
3875! DarkMagenta + Magenta
3876*color5: #b16286
3877*color13: #8f3f71
3878! DarkCyan + Cyan
3879*color6: #689d6a
3880*color14: #427b58
3881! LightGrey + White
3882*color7: #7c6f64
3883*color15: #3c3836
3884#+end_src
3885
3886#+begin_src conf-xdefaults :tangle no
3887! -----------------------------------------------------------------------------
3888! File: gruvbox-dark.xresources
3889! Description: Retro groove colorscheme generalized
3890! Author: morhetz <morhetz@gmail.com>
3891! Source: https://github.com/morhetz/gruvbox-generalized
3892! Last Modified: 6 Sep 2014
3893! -----------------------------------------------------------------------------
3894
3895! hard contrast: *background: #1d2021
3896*background: #282828
3897! soft contrast: *background: #32302f
3898*foreground: #ebdbb2
3899! Black + DarkGrey
3900*color0: #282828
3901*color8: #928374
3902! DarkRed + Red
3903*color1: #cc241d
3904*color9: #fb4934
3905! DarkGreen + Green
3906*color2: #98971a
3907*color10: #b8bb26
3908! DarkYellow + Yellow
3909*color3: #d79921
3910*color11: #fabd2f
3911! DarkBlue + Blue
3912*color4: #458588
3913*color12: #83a598
3914! DarkMagenta + Magenta
3915*color5: #b16286
3916*color13: #d3869b
3917! DarkCyan + Cyan
3918*color6: #689d6a
3919*color14: #8ec07c
3920! LightGrey + White
3921*color7: #a89984
3922*color15: #ebdbb2
3923#+end_src
3924
3925#+begin_src conf-xdefaults :tangle no
3926! -----------------------------------------------------------------------------
3927! File: gruvbox-urxvt256.xresources
3928! Description: Retro groove colorscheme generalized
3929! Author: morhetz <morhetz@gmail.com>
3930! Source: https://github.com/morhetz/gruvbox-generalized
3931! Last Modified: 13 Dec 2013
3932! -----------------------------------------------------------------------------
3933
3934URxvt.color24: #076678
3935URxvt.color66: #427b58
3936URxvt.color88: #9d0006
3937URxvt.color96: #8f3f71
3938URxvt.color100: #79740e
3939URxvt.color108: #8ec07c
3940URxvt.color109: #83a598
3941URxvt.color130: #af3a03
3942URxvt.color136: #b57614
3943URxvt.color142: #b8bb26
3944URxvt.color167: #fb4934
3945URxvt.color175: #d3869b
3946URxvt.color208: #fe8019
3947URxvt.color214: #fabd2f
3948URxvt.color223: #ebdbb2
3949URxvt.color228: #f2e5bc
3950URxvt.color229: #fbf1c7
3951URxvt.color230: #f9f5d7
3952URxvt.color234: #1d2021
3953URxvt.color235: #282828
3954URxvt.color236: #32302f
3955URxvt.color237: #3c3836
3956URxvt.color239: #504945
3957URxvt.color241: #665c54
3958URxvt.color243: #7c6f64
3959URxvt.color244: #928374
3960URxvt.color245: #928374
3961URxvt.color246: #a89984
3962URxvt.color248: #bdae93
3963URxvt.color250: #d5c4a1
3964#+end_src
3965
3966***** emacs
3967:PROPERTIES:
3968:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
3969:END:
3970
3971#+begin_src conf-xdefaults
3972Emacs.menuBar: off
3973Emacs.toolBar: off
3974Emacs.verticalScrollBars: off
3975Emacs.cursorBlink: off
3976Emacs.FontBackend: xft,x
3977! Emacs.font: Ubuntu Mono-12
3978! Emacs.font: Triplicate T4C-11
3979! Emacs.font: Ubuntu Mono-10.5
3980! Emacs.font: Ubuntu Mono-12
3981! Emacs.font: Iosevka-11
3982
3983! Emacs.font: Fira Mono:size=15
3984! Emacs.font: DejaVu Sans Mono:size=15
3985! Emacs.font: Inconsolata:size=17
3986! Emacs.font: Inconsolata:size=16
3987! Emacs.font: Inconsolata LGC:size=14
3988! Emacs.font: Source Code Pro Medium-10.5
3989Emacs.font: Source Code Pro:size=14
3990! Emacs.font: Ubuntu Mono:size=16
3991! Emacs.font: Iosevka:size=16
3992#+end_src
3993
3994***** rxvt-unicode
3995:PROPERTIES:
3996:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
3997:END:
3998
3999#+begin_src conf-xdefaults
4000! Font
4001URxvt.font: xft:source code pro:pixelsize=14:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
4002URxvt.boldFont: xft:source code pro:semibold:pixelsize=14:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
4003URxvt.italicFont: xft:source code pro:italic:pixelsize=14:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
4004URxvt.bolditalicFont: xft:source code pro:semibold:italic:pixelsize=14:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
4005
4006URxvt.xftAntialias: true
4007URxvt.letterSpace: 0
4008
4009URxvt.depth: 0
4010URxvt.loginShell: true
4011URxvt.saveLines: 100000
4012URxvt.internalBorder: 3
4013URxvt.lineSpace: 0
4014URxvt.scrollBar: false
4015URxvt.scrollStyle: rxvt
4016URxvt*scrollTtyOutput: false
4017URxvt*scrollWithBuffer: true
4018URxvt*scrollTtyKeypress: true
4019URxvt.keysym.Shift-Up: command:\033]720;1\007
4020URxvt.keysym.Shift-Down: command:\033]721;1\007
4021
4022URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select
4023URxvt.url-select.launcher: firefox
4024URxvt.url-select.underline: true
4025URxvt.keysym.M-u: perl:url-select:select_next
4026URxvt.keysym.M-Escape: perl:keyboard-select:activate
4027URxvt.keysym.M-s: perl:keyboard-select:search
4028URxvt.url-launcher: /usr/bin/firefox
4029URxvt.matcher.button: 1
4030URxvt.iso14755: false
4031URxvt.iso14755_53: false
4032URxvt.keysym.M-c: perl:clipboard:copy
4033URxvt.keysym.M-v: perl:clipboard:paste
4034URxvt.keysym.C-A-V: perl:clipboard:paste_escaped
4035URxvt.keysym.C-Up: font-size:increase
4036URxvt.keysym.C-Down: font-size:decrease
4037URxvt.keysym.C-S-Up: font-size:incglobal
4038URxvt.keysym.C-S-Down: font-size:decglobal
4039URxvt.keysym.C-equal: font-size:reset
4040!URxvt.keysym.C-question: font-size:show
4041
4042URxvt.iconFile: /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
4043
4044!urxvt*foreground: white
4045!urxvt*background: black
4046
4047!*color0: #2E3436
4048!*color1: #a40000
4049!*color2: #4E9A06
4050!*color3: #C4A000
4051!*color4: #3465A4
4052!*color5: #75507B
4053!*color6: #ce5c00
4054!*color7: #babdb9
4055!*color8: #555753
4056!*color9: #EF2929
4057!*color10: #8AE234
4058!*color11: #FCE94F
4059!*color12: #729FCF
4060!*color13: #AD7FA8
4061!*color14: #fcaf3e
4062!*color15: #EEEEEC
4063
4064!URxvt.foreground: #C8C8C8
4065!URxvt.background: #FFFFFF
4066
4067!! black
4068!*color0: #2E3436
4069!*color8: #555753
4070!! red
4071!*color1: #a40000
4072!*color9: #EF2929
4073!! green
4074!*color2: #4E9A06
4075!*color10: #8AE234
4076!! yellow
4077!*color3: #C4A000
4078!*color11: #FCE94F
4079!! blue
4080!*color4: #3465A4
4081!*color12: #729FCF
4082!! purple
4083!*color5: #75507B
4084!*color13: #AD7FA8
4085!! orange (replaces cyan)
4086!*color6: #ce5c00
4087!*color14: #fcaf3e
4088!! white
4089!*color7: #babdb9
4090!*color15: #EEEEEC
4091
4092! Tango colour theme for rxvt-unicode
4093URxvt.background: #FFFFFF
4094URxvt.foreground: #000000
4095
4096! Black
4097URxvt.color0: #2E3436
4098URxvt.color8: #757773
4099
4100! Red
4101URxvt.color1: #CC0000
4102URxvt.color9: #EF2929
4103
4104! Green
4105URxvt.color2: #4E9A06
4106URxvt.color10: #8AE234
4107
4108! Yellow
4109URxvt.color3: #C4A000
4110URxvt.color11: #FCE94F
4111
4112! Blue
4113URxvt.color4: #3465A4
4114URxvt.color12: #729FCF
4115
4116! Magenta
4117URxvt.color5: #75507B
4118URxvt.color13: #AD7FA8
4119
4120!! Cyan
4121!URxvt.color6: #06989A
4122!URxvt.color14: #34E2E2
4123! orange (replaces cyan)
4124,*color6: #ce5c00
4125,*color14: #fcaf3e
4126
4127! White
4128URxvt.color7: #D3D7CF
4129URxvt.color15: #EEEEEC
4130#+end_src
4131
4132*** xkb us_ab keyboard layout
4133
4134#+begin_src conf :tangle "/sudo::/usr/share/X11/xkb/symbols/us_ab" :comments none
4135default partial alphanumeric_keys
4136xkb_symbols "us_ab" {
4137 include "us(basic)"
4138 name[Group1]= "English (US)(aminb)";
4139
4140 key <MENU> { [ Alt_R ] };
4141};
4142#+end_src
4143
4144** XDG
4145:PROPERTIES:
4146:header-args+: :tangle ~/.config/user-dirs.dirs
4147:END:
4148
4149#+begin_src conf
4150XDG_DESKTOP_DIR="$HOME/Desktop"
4151XDG_DOCUMENTS_DIR="$HOME/usr/docs"
4152XDG_DOWNLOAD_DIR="$HOME/usr/dls"
4153XDG_MUSIC_DIR="$HOME/usr/music"
4154XDG_PICTURES_DIR="$HOME/usr/pics"
4155XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
4156XDG_TEMPLATES_DIR="$HOME/usr/Templates"
4157XDG_VIDEOS_DIR="$HOME/usr/vids"
4158#+end_src
4159
4160** Zathura
4161:PROPERTIES:
4162:header-args+: :tangle ~/.config/zathura/zathurarc
4163:END:
4164
4165#+begin_src conf
4166set smooth-scroll true
4167set selection-clipboard clipboard
4168set zoom-step 05
4169set default-bg "#272727"
4170set statusbar-bg "#272727"
4171set inputbar-bg "#373737"
4172#+end_src
4173
4174** Zsh
4175
4176My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
4177[[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
4178installed.
4179
4180*** zimrc
4181:PROPERTIES:
4182:header-args+: :tangle ~/.zimrc
4183:END:
4184
4185#+begin_src sh
4186#################
4187# CORE SETTINGS #
4188#################
4189
4190#
4191# Zim settings
4192#
4193
4194# Select what modules you would like enabled.
4195# The second line of modules may depend on options set by modules in the first
4196# line. These dependencies are noted on the respective module's README.md.
4197zmodules=(directory environment git git-info history input ssh utility custom \
4198 syntax-highlighting history-substring-search prompt completion)
4199
4200
4201###################
4202# MODULE SETTINGS #
4203###################
4204
4205#
4206# Prompt
4207#
4208
4209# Set your desired prompt here
4210zprompt_theme='pure'
4211#PURE_PROMPT_SYMBOL=λ
4212#PURE_PROMPT_SYMBOL=δ
4213PURE_PROMPT_SYMBOL=➜
4214
4215#
4216# Completion
4217#
4218
4219# set an optional host-specific filename for the completion cache file
4220# if none is provided, the default '.zcompdump' is used.
4221#zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
4222
4223#
4224# Utility
4225#
4226
4227# Uncomment to enable command correction prompts
4228# See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
4229setopt CORRECT
4230
4231#
4232# Environment
4233#
4234
4235# Set the string below to the desired terminal title format string.
4236# The terminal title is redrawn upon directory change, however, variables like
4237# ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
4238# http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
4239# The example below uses the following format: 'username@host:/current/directory'
4240ztermtitle='%n@%m:%~'
4241
4242#
4243# Input
4244#
4245
4246# Uncomment to enable double-dot expansion.
4247# This appends '../' to your input for each '.' you type after an initial '..'
4248#zdouble_dot_expand='true'
4249
4250#
4251# Syntax-Highlighting
4252#
4253
4254# This determines what highlighters will be used with the syntax-highlighting module.
4255# Documentation of the highlighters can be found here:
4256# https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
4257# For (u)rxvt, termite and gnome-terminal users,
4258# removing the 'cursor' highlighter will fix the disappearing cursor problem
4259#zhighlighters=(main brackets cursor)
4260zhighlighters=(main brackets pattern)
4261
4262#
4263# SSH
4264#
4265
4266# Load these ssh identities with the ssh module
4267zssh_ids=(id_ed25519_bandali)
4268
4269#
4270# Pacman
4271#
4272
4273# Set (optional) pacman front-end.
4274zpacman_frontend='yay'
4275
4276# Load any helper scripts as defined here
4277#zpacman_helper=(aur)
4278
4279
4280#+end_src
4281
4282*** zlogin
4283:PROPERTIES:
4284:header-args+: :tangle ~/.zlogin
4285:END:
4286
4287#+begin_src sh
4288#
4289# User configuration sourced by login shells
4290#
4291
4292# Initialize zim
4293[[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
4294
4295#+end_src
4296
4297*** zprofile
4298:PROPERTIES:
4299:header-args+: :tangle ~/.zprofile
4300:END:
4301
4302#+begin_src sh
4303#PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
4304#PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
4305export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
4306export XDG_CONFIG_HOME=$HOME/.config
4307export XDG_DATA_HOME=$HOME/.local/share
4308export XDG_DATA_DIRS=/usr/local/share:/usr/share
4309export MAILDIR="$HOME/mail"
4310export CVS_RSH=ssh
4311#export MATHMODELS=$HOME/src/eiffel/mathmodels
4312#export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
4313#export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
4314
4315# Eiffel2Java stuff
4316#export JAVA_HOME=/usr/lib/jvm/default
4317#export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
4318#export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4319#export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4320
4321#export PATH="$HOME/usr/build/pvs:$PATH"
4322#export SBCLISP_HOME=/usr/share/sbcl-source
4323#export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
4324
4325export MOZ_USE_XINPUT2=1 # precise scrolling in firefox
4326
4327#export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
4328#export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
4329
4330export NIXPKGS=$HOME/src/git/nixpkgs
4331
4332if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
4333
4334export GUIX_LOCPATH="$HOME/.guix-profile/lib/locale"
4335export PATH="/$HOME/.config/guix/current/bin${PATH:+:}$PATH"
4336export SSL_CERT_DIR="$HOME/.guix-profile/etc/ssl/certs"
4337export SSL_CERT_FILE="$HOME/.guix-profile/etc/ssl/certs/ca-certificates.crt"
4338export GIT_SSL_CAINFO="$SSL_CERT_FILE"
4339#+end_src
4340
4341*** zshenv
4342:PROPERTIES:
4343:header-args+: :tangle ~/.zshenv
4344:END:
4345
4346#+begin_src sh
4347# Ensure that a non-login, non-interactive shell has a defined environment.
4348if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
4349 source "${ZDOTDIR:-$HOME}/.zprofile"
4350fi
4351#+end_src
4352
4353*** zshrc
4354:PROPERTIES:
4355:header-args+: :tangle ~/.zshrc
4356:END:
4357
4358#+begin_src sh
4359# Bash-like navigation
4360#export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
4361#export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
4362export WORDCHARS='*?[]~=&;!#$%^(){}<>'
4363#ZLE_SPACE_SUFFIX_CHARS=$'|&'
4364
4365#disable -r time # disable shell reserved word
4366#alias time='time -p' # -p for POSIX output
4367
4368# rehash if last command was pacaur or pacman
4369# (so that zsh picks up changes in $PATH immediately)
4370TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
4371
4372#
4373# User configuration sourced by interactive shells
4374#
4375
4376# Define zim location
4377export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
4378
4379# Start zim
4380[[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
4381
4382ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
4383#ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
4384
4385setopt globdots
4386
4387source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
4388# source ~/.zsh/zsh-autopair/autopair.zsh
4389
4390
4391### fzf ###
4392
4393source /usr/share/fzf/key-bindings.zsh
4394source /usr/share/fzf/completion.zsh
4395
4396# Accept history selection instead of putting it on
4397# the command line
4398fzf-history-widget-accept() {
4399 fzf-history-widget
4400 zle accept-line
4401}
4402#zle -N fzf-history-widget-accept
4403#bindkey '^R' fzf-history-widget-accept
4404
4405# alt+c preview
4406export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
4407
4408### fzf ###
4409
4410
4411# aliases
4412alias mpv="mpv --ytdl-format mp4"
4413alias mv="mv -iv"
4414alias cp="cp -iv"
4415alias scl=systemctl
4416alias jcl=journalctl
4417alias m="mbsync csclub; mbsync uwaterloo; mbsync amin"
4418alias best="youtube-dl -f best"
4419alias sd="ssh deb"
4420alias sf="ssh fp"
4421alias sn="ssh nix"
4422
4423aur() {
4424 cd ~/usr/build
4425 git clone https://aur.archlinux.org/${1}.git
4426 cd ${1}
4427}
4428
4429# i-beam cursor
4430echo -e "\033[5 q"
4431#echo -e "\033[6 q"
4432
4433#+end_src
4434
4435* Scripts
4436
4437This section contains various useful scripts and the ones used by the
4438programs above. For instance, =toggle-tablet= for switching to and
4439from tablet mode on my X220T, =toggle-presentation-mode= for toggling
4440Xfce's presentation mode which keeps the screen awake, and
4441=rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
4442exact brightness value.
4443
4444** battery-percentage-time
4445:PROPERTIES:
4446:header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/sh"
4447:END:
4448
4449#+begin_src sh :tangle no
4450dbus_send() {
4451 label=$1
4452 dbus-send --print-reply=literal --system \
4453 --dest=org.freedesktop.UPower \
4454 /org/freedesktop/UPower/devices/battery_BAT0 \
4455 org.freedesktop.DBus.Properties.Get \
4456 string:org.freedesktop.UPower.Device \
4457 string:"${label}" | awk '{print $3}'
4458}
4459
4460perc=$(dbus_send 'Percentage')
4461state=$(dbus_send 'State')
4462
4463if [ "$state" -eq 2 ]; then # Discharging
4464 secs=$(dbus_send 'TimeToEmpty')
4465elif [ "$state" -eq 1 ]; then # Charging
4466 secs=$(dbus_send 'TimeToFull')
4467fi
4468
4469printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60))
4470#+end_src
4471
4472** my-i3status.py
4473:PROPERTIES:
4474:header-args+: :tangle ~/.local/bin/my-i3status.py :shebang "#!/usr/bin/env python2"
4475:END:
4476
4477#+begin_src python :comments none
4478# -*- coding: utf-8 -*-
4479
4480# This script is a simple wrapper which prefixes each i3status line with custom
4481# information. It is based on:
4482# https://github.com/i3/i3status/blob/master/contrib/wrapper.py
4483#
4484# In ~/.i3status.conf, add the following line:
4485# output_format = "i3bar"
4486# in the 'general' section.
4487# Then, in ~/.config/i3/config or ~/.config/sway/config add:
4488# status_command i3status | my-i3status.py
4489# in the 'bar' section. Make sure my-i3status.py is in $PATH.
4490#
4491# © 2012 Valentin Haenel <valentin.haenel@gmx.de>
4492# © 2018 Amin Bandali <bandali@gnu.org>
4493#
4494# This program is free software. It comes without any warranty, to the extent
4495# permitted by applicable law. You can redistribute it and/or modify it under
4496# the terms of the Do What The Fuck You Want To Public License (WTFPL), Version
4497# 2, as published by Sam Hocevar. See http://sam.zoy.org/wtfpl/COPYING for more
4498# details.
4499
4500import sys
4501import json
4502import os
4503
4504def get_nosleep():
4505 """ Return true if ~/.nosleep exists. """
4506 return os.path.isfile(os.path.expanduser("~/.nosleep"))
4507
4508def print_line(message):
4509 """ Non-buffered printing to stdout. """
4510 sys.stdout.write(message + '\n')
4511 sys.stdout.flush()
4512
4513def read_line():
4514 """ Interrupted respecting reader for stdin. """
4515 # try reading a line, removing any extra whitespace
4516 try:
4517 line = sys.stdin.readline().strip()
4518 # i3status sends EOF, or an empty line
4519 if not line:
4520 sys.exit(3)
4521 return line
4522 # exit on ctrl-c
4523 except KeyboardInterrupt:
4524 sys.exit()
4525
4526if __name__ == '__main__':
4527 # Skip the first line which contains the version header.
4528 print_line(read_line())
4529
4530 # The second line contains the start of the infinite array.
4531 print_line(read_line())
4532
4533 while True:
4534 line, prefix = read_line(), ''
4535 # ignore comma at start of lines
4536 if line.startswith(','):
4537 line, prefix = line[1:], ','
4538
4539 if get_nosleep():
4540 j = json.loads(line)
4541 # insert information into the start of the json, but could be anywhere
4542 j.insert(0, {'full_text' : '🖵 ', 'name' : 'nosleep'})
4543 # and echo back new encoded json
4544 print_line(prefix+json.dumps(j))
4545 else:
4546 print_line(prefix+line)
4547#+end_src
4548
4549** rofi-light
4550:PROPERTIES:
4551:header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
4552:END:
4553
4554#+begin_src bash
4555cur=$(light -G)
4556val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 12)
4557[ -n "$val" ] && light -S $val
4558#+end_src
4559
4560** rofi-remmina.py
4561:PROPERTIES:
4562:header-args+: :tangle ~/.local/bin/rofi-remmina.py :shebang "#!/usr/bin/env python2"
4563:END:
4564
4565#+begin_src python
4566import ConfigParser
4567import os
4568from subprocess import Popen, PIPE
4569
4570remmina_dir = os.path.expanduser("~/.local/share/remmina")
4571
4572fdict = dict()
4573
4574for f in os.listdir(remmina_dir):
4575 fp = os.path.join(remmina_dir, f)
4576 c = ConfigParser.ConfigParser()
4577 c.read(fp)
4578 n = c.get('remmina', 'name')
4579 fdict[n] = fp
4580
4581lines = max(min(15, len(fdict)), 1);
4582width = len(max(fdict.keys(), key=len))
4583rofi = Popen(["rofi", "-i", "-dmenu", \
4584 "-l", str(lines), "-width", str(width), \
4585 "-p", "connection"], stdout=PIPE, stdin=PIPE)
4586selected = rofi.communicate("\n" \
4587 .join(fdict.keys()) \
4588 .encode("utf-8"))[0] \
4589 .decode("utf-8") \
4590 .strip()
4591rofi.wait()
4592
4593r = Popen(["remmina", "-c", fdict[selected]])
4594r.wait()
4595#+end_src
4596
4597** s (run sway)
4598:PROPERTIES:
4599:header-args+: :tangle ~/.local/bin/s :shebang "#!/bin/bash"
4600:END:
4601
4602#+begin_src bash
4603export _JAVA_AWT_WM_NONREPARENTING=1
4604export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4605light -Nr 2
4606source $HOME/.zprofile
4607sway
4608#+end_src
4609
4610** sway-ws-util
4611:PROPERTIES:
4612:header-args+: :tangle ~/.local/bin/sway-ws-util :shebang "#!/bin/bash"
4613:END:
4614
4615#+begin_src bash
4616curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name')
4617[[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1))
4618[[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1))
4619dest_ws=-1
4620op=-1
4621
4622if [ "$1" = "switch" ] || [ "$1" = "move" ]; then
4623 op="$1"
4624 if [ "$2" = "prev" ]; then
4625 dest_ws="$prev_ws"
4626 elif [ "$2" = "next" ]; then
4627 dest_ws="$next_ws"
4628 else
4629 echo "Usage: $0 $1 {prev|next} [follow]"
4630 exit 1
4631 fi
4632else
4633 echo "Usage: $0 {switch|move} {prev|next} [follow]"
4634 exit 1
4635fi
4636
4637if [ "$op" = "switch" ]; then
4638 sway workspace "$dest_ws"
4639elif [ "$op" = "move" ]; then
4640 sway move container to workspace "$dest_ws"
4641 if [ "$3" = "follow" ]; then
4642 sway workspace "$dest_ws"
4643 fi
4644fi
4645#+end_src
4646
4647** toggle-layout
4648:PROPERTIES:
4649:header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
4650:END:
4651
4652#+begin_src bash :tangle no
4653lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
4654
4655if [ "$lang" = "us" ]; then
4656 setxkbmap ir
4657else
4658 setxkbmap us
4659 # xmodmap $HOME/.Xmodmap
4660fi
4661#+end_src
4662
4663** toggle-presentation-mode
4664:PROPERTIES:
4665:header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
4666:END:
4667
4668#+begin_src bash :tangle no
4669xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
4670#+end_src
4671
4672** toggle-tablet
4673:PROPERTIES:
4674:header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
4675:END:
4676
4677This script toggles between a 'normal' mode and a 'tablet' mode, doing
4678a few things:
4679
4680- rotates the screen using =xrandr=, so that rotating the physical
4681 display of my X220t would have the laptop's battery on the right
4682 hand side,
4683- enables touch screen,
4684- properly rotates the stylus pen and touch screen pointers, and
4685- toggles between RGB and Vertical BGR sub-pixel order.
4686
4687#+begin_src bash :tangle no
4688case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
4689 0) # Screen is not rotated, we should rotate it right (90°)
4690 xrandr -o 3
4691 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
4692 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
4693 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
4694 xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
4695 ;;
4696 1) # Currently top is rotated right, we should set it normal (0°)
4697 xrandr -o 0
4698 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
4699 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
4700 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
4701 xfconf-query -c xsettings -p /Xft/RGBA -s rgb
4702 ;;
4703 *)
4704 echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
4705 exit 1
4706 ;;
4707esac
4708#+end_src
4709
4710** unlock-def-gk.py
4711:PROPERTIES:
4712:header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
4713:END:
4714
4715#+begin_src python :tangle no
4716import gnomekeyring as gk
4717# list_item_ids_sync('login')[0] == 1L
4718gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
4719#+end_src
4720
4721** volume-info
4722:PROPERTIES:
4723:header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh"
4724:END:
4725
4726#+begin_src sh :tangle no
4727cur_vol=$(pamixer --get-volume)
4728
4729if [ $(pamixer --get-mute) = true ]; then
4730 printf 'mt \n' "$cur_vol"
4731else
4732 printf '%02d \n' "$cur_vol"
4733fi
4734#+end_src
4735
4736** wp
4737
4738My little wallpaper changer script.
4739
4740*** wp
4741:PROPERTIES:
4742:header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
4743:END:
4744
4745#+begin_src bash :tangle no
4746export DISPLAY=:0
4747
4748case "$1" in
4749 "day")
4750 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
4751 ;;
4752 "night")
4753 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
4754 ;;
4755 *)
4756 echo $"Usage: $0 {day|night}"
4757 exit 1
4758esac
4759#+end_src
4760
4761*** wp-auto
4762:PROPERTIES:
4763:header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
4764:END:
4765
4766#+begin_src bash :tangle no
4767SED=$(which sed)
4768ROFI=$(which rofi)
4769
4770export DISPLAY=:0
4771HOUR=$(date +%H)
4772
4773if [ -z "${SED}" ]
4774then
4775 echo "Did not find 'sed', script cannot continue."
4776 exit 1
4777fi
4778if [ -z "${ROFI}" ]
4779then
4780 echo "Did not find rofi, there is no point to continue."
4781 exit 1
4782fi
4783
4784###
4785# Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
4786# Repeated calls should leave the config clean-ish
4787###
4788function set_theme()
4789{
4790 CDIR="${HOME}/.config/rofi/"
4791 if [ ! -d "${CDIR}" ]
4792 then
4793 mkdir -p ${CDIR}
4794 fi
4795 if [ -f "${CDIR}/config" ]
4796 then
4797 ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
4798 fi
4799 echo "rofi.theme: ${1}" >> "${CDIR}/config"
4800
4801}
4802
4803if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
4804 then
4805 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
4806 xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
4807 set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
4808 else
4809 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
4810 xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
4811 set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
4812fi
4813#+end_src
4814
4815*** wp.service
4816:PROPERTIES:
4817:header-args+: :tangle ~/.config/systemd/user/wp.service
4818:END:
4819
4820#+begin_src conf :tangle no
4821[Unit]
4822Description=wallpaper service
4823
4824[Service]
4825Type=oneshot
4826ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
4827#+end_src
4828
4829*** wp.timer
4830:PROPERTIES:
4831:header-args+: :tangle ~/.config/systemd/user/wp.timer
4832:END:
4833
4834#+begin_src conf :tangle no
4835[Unit]
4836[Unit]
4837Description=wallpaper timer
4838
4839[Timer]
4840OnCalendar=07,21:00
4841Unit=wp.service
4842Persistent=true
4843
4844[Install]
4845WantedBy=timers.target
4846#+end_src
4847
4848** zathura-sync.sh
4849:PROPERTIES:
4850:header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
4851:END:
4852
4853#+begin_src sh
4854pos="$1"
4855pdffile="$2"
4856zathura --synctex-forward "$pos" "$pdffile" || \
4857 (
4858 zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
4859 sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
4860#+end_src
4861** Fun :)
4862
4863*** eat-em
4864:PROPERTIES:
4865:header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
4866:END:
4867
4868#+begin_src sh
4869# Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
4870# [ESC] character in original post removed here.
4871
4872# ANSI Color -- use these variables to easily have different color
4873# and format output. Make sure to output the reset sequence after
4874# colors (f = foreground, b = background), and use the 'off'
4875# feature for anything you turn on.
4876
4877initializeANSI()
4878{
4879 esc="$(echo -en '\e')"
4880
4881 blackf="${esc}[30m"; redf="${esc}[31m"; greenf="${esc}[32m"
4882 yellowf="${esc}[33m" bluef="${esc}[34m"; purplef="${esc}[35m"
4883 cyanf="${esc}[36m"; whitef="${esc}[37m"
4884
4885 blackb="${esc}[40m"; redb="${esc}[41m"; greenb="${esc}[42m"
4886 yellowb="${esc}[43m" blueb="${esc}[44m"; purpleb="${esc}[45m"
4887 cyanb="${esc}[46m"; whiteb="${esc}[47m"
4888
4889 boldon="${esc}[1m"; boldoff="${esc}[22m"
4890 italicson="${esc}[3m"; italicsoff="${esc}[23m"
4891 ulon="${esc}[4m"; uloff="${esc}[24m"
4892 invon="${esc}[7m"; invoff="${esc}[27m"
4893
4894 reset="${esc}[0m"
4895}
4896
4897# note in this first use that switching colors doesn't require a reset
4898# first - the new color overrides the old one.
4899
4900#clear
4901
4902initializeANSI
4903
4904cat << EOF
4905
4906 ${yellowf} ▄███████▄${reset} ${redf} ▄██████▄${reset} ${greenf} ▄██████▄${reset} ${bluef} ▄██████▄${reset} ${purplef} ▄██████▄${reset} ${cyanf} ▄██████▄${reset}
4907 ${yellowf}▄█████████▀▀${reset} ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset} ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset} ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset} ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset} ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
4908 ${yellowf}███████▀${reset} ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset} ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset} ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset} ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset} ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
4909 ${yellowf}███████▄${reset} ${redf}████████████${reset} ${greenf}████████████${reset} ${bluef}████████████${reset} ${purplef}████████████${reset} ${cyanf}████████████${reset}
4910 ${yellowf}▀█████████▄▄${reset} ${redf}██▀██▀▀██▀██${reset} ${greenf}██▀██▀▀██▀██${reset} ${bluef}██▀██▀▀██▀██${reset} ${purplef}██▀██▀▀██▀██${reset} ${cyanf}██▀██▀▀██▀██${reset}
4911 ${yellowf} ▀███████▀${reset} ${redf}▀ ▀ ▀ ▀${reset} ${greenf}▀ ▀ ▀ ▀${reset} ${bluef}▀ ▀ ▀ ▀${reset} ${purplef}▀ ▀ ▀ ▀${reset} ${cyanf}▀ ▀ ▀ ▀${reset}
4912
4913 ${boldon}${yellowf} ▄███████▄ ${redf} ▄██████▄ ${greenf} ▄██████▄ ${bluef} ▄██████▄ ${purplef} ▄██████▄ ${cyanf} ▄██████▄${reset}
4914 ${boldon}${yellowf}▄█████████▀▀ ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄ ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄ ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄ ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄ ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
4915 ${boldon}${yellowf}███████▀ ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███ ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███ ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███ ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███ ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
4916 ${boldon}${yellowf}███████▄ ${redf}████████████ ${greenf}████████████ ${bluef}████████████ ${purplef}████████████ ${cyanf}████████████${reset}
4917 ${boldon}${yellowf}▀█████████▄▄ ${redf}██▀██▀▀██▀██ ${greenf}██▀██▀▀██▀██ ${bluef}██▀██▀▀██▀██ ${purplef}██▀██▀▀██▀██ ${cyanf}██▀██▀▀██▀██${reset}
4918 ${boldon}${yellowf} ▀███████▀ ${redf}▀ ▀ ▀ ▀ ${greenf}▀ ▀ ▀ ▀ ${bluef}▀ ▀ ▀ ▀ ${purplef}▀ ▀ ▀ ▀ ${cyanf}▀ ▀ ▀ ▀${reset}
4919
4920EOF
4921#+end_src
4922
4923*** invade-em
4924:PROPERTIES:
4925:header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
4926:END:
4927
4928#+begin_src bash
4929#
4930# ANSI color scheme script featuring Space Invaders
4931#
4932# Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
4933# Modified by lolilolicon
4934#
4935
4936f=3 b=4
4937for j in f b; do
4938 for i in {0..7}; do
4939 printf -v $j$i %b "\e[${!j}${i}m"
4940 done
4941done
4942bld=$'\e[1m'
4943rst=$'\e[0m'
4944
4945cat << EOF
4946
4947 $f1 ▀▄ ▄▀ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4 ▀▄ ▄▀ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
4948 $f1 ▄█▀███▀█▄ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4 ▄█▀███▀█▄ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
4949 $f1█▀███████▀█ $f2▀▀███▀▀███▀▀ $f3▀█▀██▀█▀ $f4█▀███████▀█ $f5▀▀███▀▀███▀▀ $f6▀█▀██▀█▀$rst
4950 $f1▀ ▀▄▄ ▄▄▀ ▀ $f2 ▀█▄ ▀▀ ▄█▀ $f3▀▄ ▄▀ $f4▀ ▀▄▄ ▄▄▀ ▀ $f5 ▀█▄ ▀▀ ▄█▀ $f6▀▄ ▄▀$rst
4951
4952 $bld$f1▄ ▀▄ ▄▀ ▄ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4▄ ▀▄ ▄▀ ▄ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
4953 $bld$f1█▄█▀███▀█▄█ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4█▄█▀███▀█▄█ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
4954 $bld$f1▀█████████▀ $f2▀▀▀██▀▀██▀▀▀ $f3▀▀█▀▀█▀▀ $f4▀█████████▀ $f5▀▀▀██▀▀██▀▀▀ $f6▀▀█▀▀█▀▀$rst
4955 $bld$f1 ▄▀ ▀▄ $f2▄▄▀▀ ▀▀ ▀▀▄▄ $f3▄▀▄▀▀▄▀▄ $f4 ▄▀ ▀▄ $f5▄▄▀▀ ▀▀ ▀▀▄▄ $f6▄▀▄▀▀▄▀▄$rst
4956
4957
4958 $f7▌$rst
4959
4960 $f7▌$rst
4961
4962 $f7 ▄█▄ $rst
4963 $f7▄█████████▄$rst
4964 $f7▀▀▀▀▀▀▀▀▀▀▀$rst
4965
4966EOF
4967#+end_src