+#+begin_src conf
+# An example configuration file for MPD.
+# Read the user manual for documentation: http://www.musicpd.org/doc/user/
+
+
+# Files and directories #######################################################
+#
+# This setting controls the top directory which MPD will search to discover the
+# available audio files and add them to the daemon's online database. This
+# setting defaults to the XDG directory, otherwise the music directory will be
+# be disabled and audio files will only be accepted over ipc socket (using
+# file:// protocol) or streaming files over an accepted protocol.
+#
+music_directory "~/usr/music"
+#
+# This setting sets the MPD internal playlist directory. The purpose of this
+# directory is storage for playlists created by MPD. The server will use
+# playlist files not created by the server but only if they are in the MPD
+# format. This setting defaults to playlist saving being disabled.
+#
+playlist_directory "~/.mpd/playlists"
+#
+# This setting sets the location of the MPD database. This file is used to
+# load the database at server start up and store the database while the
+# server is not up. This setting defaults to disabled which will allow
+# MPD to accept files over ipc socket (using file:// protocol) or streaming
+# files over an accepted protocol.
+#
+db_file "~/.mpd/database"
+#
+# These settings are the locations for the daemon log files for the daemon.
+# These logs are great for troubleshooting, depending on your log_level
+# settings.
+#
+# The special value "syslog" makes MPD use the local syslog daemon. This
+# setting defaults to logging to syslog, otherwise logging is disabled.
+#
+log_file "~/.mpd/log"
+#
+# This setting sets the location of the file which stores the process ID
+# for use of mpd --kill and some init scripts. This setting is disabled by
+# default and the pid file will not be stored.
+#
+pid_file "~/.mpd/pid"
+#
+# This setting sets the location of the file which contains information about
+# most variables to get MPD back into the same general shape it was in before
+# it was brought down. This setting is disabled by default and the server
+# state will be reset on server start up.
+#
+state_file "~/.mpd/state"
+#
+# The location of the sticker database. This is a database which
+# manages dynamic information attached to songs.
+#
+sticker_file "~/.mpd/sticker.sql"
+#
+###############################################################################
+
+
+# General music daemon options ################################################
+#
+# This setting specifies the user that MPD will run as. MPD should never run as
+# root and you may use this setting to make MPD change its user ID after
+# initialization. This setting is disabled by default and MPD is run as the
+# current user.
+#
+#user "nobody"
+#
+# This setting specifies the group that MPD will run as. If not specified
+# primary group of user specified with "user" setting will be used (if set).
+# This is useful if MPD needs to be a member of group such as "audio" to
+# have permission to use sound card.
+#
+#group "nogroup"
+#
+# This setting sets the address for the daemon to listen on. Careful attention
+# should be paid if this is assigned to anything other then the default, any.
+# This setting can deny access to control of the daemon. Not effective if
+# systemd socket activiation is in use.
+#
+# For network
+#bind_to_address "any"
+#
+# And for Unix Socket
+#bind_to_address "~/.mpd/socket"
+#
+# This setting is the TCP port that is desired for the daemon to get assigned
+# to.
+#
+#port "6600"
+#
+# This setting controls the type of information which is logged. Available
+# setting arguments are "default", "secure" or "verbose". The "verbose" setting
+# argument is recommended for troubleshooting, though can quickly stretch
+# available resources on limited hardware storage.
+#
+#log_level "default"
+#
+# If you have a problem with your MP3s ending abruptly it is recommended that
+# you set this argument to "no" to attempt to fix the problem. If this solves
+# the problem, it is highly recommended to fix the MP3 files with vbrfix
+# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
+# point gapless MP3 playback can be enabled.
+#
+#gapless_mp3_playback "yes"
+#
+# Setting "restore_paused" to "yes" puts MPD into pause mode instead
+# of starting playback after startup.
+#
+#restore_paused "no"
+#
+# This setting enables MPD to create playlists in a format usable by other
+# music players.
+#
+#save_absolute_paths_in_playlists "no"
+#
+# This setting defines a list of tag types that will be extracted during the
+# audio file discovery process. The complete list of possible values can be
+# found in the user manual.
+#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
+#
+# This setting enables automatic update of MPD's database when files in
+# music_directory are changed.
+#
+#auto_update "yes"
+#
+# Limit the depth of the directories being watched, 0 means only watch
+# the music directory itself. There is no limit by default.
+#
+#auto_update_depth "3"
+#
+###############################################################################
+
+
+# Symbolic link behavior ######################################################
+#
+# If this setting is set to "yes", MPD will discover audio files by following
+# symbolic links outside of the configured music_directory.
+#
+#follow_outside_symlinks "yes"
+#
+# If this setting is set to "yes", MPD will discover audio files by following
+# symbolic links inside of the configured music_directory.
+#
+#follow_inside_symlinks "yes"
+#
+###############################################################################
+
+
+# Zeroconf / Avahi Service Discovery ##########################################
+#
+# If this setting is set to "yes", service information will be published with
+# Zeroconf / Avahi.
+#
+#zeroconf_enabled "yes"
+#
+# The argument to this setting will be the Zeroconf / Avahi unique name for
+# this MPD server on the network.
+#
+#zeroconf_name "Music Player"
+#
+###############################################################################
+
+
+# Permissions #################################################################
+#
+# If this setting is set, MPD will require password authorization. The password
+# setting can be specified multiple times for different password profiles.
+#
+#password "password@read,add,control,admin"
+#
+# This setting specifies the permissions a user has who has not yet logged in.
+#
+#default_permissions "read,add,control,admin"
+#
+###############################################################################
+
+
+# Database #######################################################################
+#
+
+#database {
+# plugin "proxy"
+# host "other.mpd.host"
+# port "6600"
+#}
+
+# Input #######################################################################
+#
+
+input {
+ plugin "curl"
+# proxy "proxy.isp.com:8080"
+# proxy_user "user"
+# proxy_password "password"
+}
+
+#
+###############################################################################
+
+# Audio Output ################################################################
+#
+
+audio_output {
+ type "pulse"
+ name "pulse audio"
+}
+
+audio_output {
+ type "fifo"
+ name "my_fifo"
+ path "/tmp/mpd.fifo"
+ format "44100:16:2"
+}
+
+# MPD supports various audio output types, as well as playing through multiple
+# audio outputs at the same time, through multiple audio_output settings
+# blocks. Setting this block is optional, though the server will only attempt
+# autodetection for one sound card.
+#
+# An example of an ALSA output:
+#
+#audio_output {
+# type "alsa"
+# name "My ALSA Device"
+## device "hw:0,0" # optional
+## mixer_type "hardware" # optional
+## mixer_device "default" # optional
+## mixer_control "PCM" # optional
+## mixer_index "0" # optional
+#}
+#
+# An example of an OSS output:
+#
+#audio_output {
+# type "oss"
+# name "My OSS Device"
+## device "/dev/dsp" # optional
+## mixer_type "hardware" # optional
+## mixer_device "/dev/mixer" # optional
+## mixer_control "PCM" # optional
+#}
+#
+# An example of a shout output (for streaming to Icecast):
+#
+#audio_output {
+# type "shout"
+# encoder "vorbis" # optional
+# name "My Shout Stream"
+# host "localhost"
+# port "8000"
+# mount "/mpd.ogg"
+# password "hackme"
+# quality "5.0"
+# bitrate "128"
+# format "44100:16:1"
+## protocol "icecast2" # optional
+## user "source" # optional
+## description "My Stream Description" # optional
+## url "http://example.com" # optional
+## genre "jazz" # optional
+## public "no" # optional
+## timeout "2" # optional
+## mixer_type "software" # optional
+#}
+#
+# An example of a recorder output:
+#
+#audio_output {
+# type "recorder"
+# name "My recorder"
+# encoder "vorbis" # optional, vorbis or lame
+# path "/var/lib/mpd/recorder/mpd.ogg"
+## quality "5.0" # do not define if bitrate is defined
+# bitrate "128" # do not define if quality is defined
+# format "44100:16:1"
+#}
+#
+# An example of a httpd output (built-in HTTP streaming server):
+#
+#audio_output {
+# type "httpd"
+# name "My HTTP Stream"
+# encoder "vorbis" # optional, vorbis or lame
+# port "8000"
+# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
+## quality "5.0" # do not define if bitrate is defined
+# bitrate "128" # do not define if quality is defined
+# format "44100:16:1"
+# max_clients "0" # optional 0=no limit
+#}
+#
+# An example of a pulseaudio output (streaming to a remote pulseaudio server)
+#
+#audio_output {
+# type "pulse"
+# name "My Pulse Output"
+## server "remote_server" # optional
+## sink "remote_server_sink" # optional
+#}
+#
+# An example of a winmm output (Windows multimedia API).
+#
+#audio_output {
+# type "winmm"
+# name "My WinMM output"
+## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
+# or
+## device "0" # optional
+## mixer_type "hardware" # optional
+#}
+#
+# An example of an openal output.
+#
+#audio_output {
+# type "openal"
+# name "My OpenAL output"
+## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
+#}
+#
+# An example of an sndio output.
+#
+#audio_output {
+# type "sndio"
+# name "sndio output"
+# mixer_type "software"
+#}
+#
+# An example of an OS X output:
+#
+#audio_output {
+# type "osx"
+# name "My OS X Device"
+## device "Built-in Output" # optional
+## channel_map "-1,-1,0,1" # optional
+#}
+#
+## Example "pipe" output:
+#
+#audio_output {
+# type "pipe"
+# name "my pipe"
+# command "aplay -f cd 2>/dev/null"
+## Or if you're want to use AudioCompress
+# command "AudioCompress -m | aplay -f cd 2>/dev/null"
+## Or to send raw PCM stream through PCM:
+# command "nc example.org 8765"
+# format "44100:16:2"
+#}
+#
+## An example of a null output (for no audio output):
+#
+#audio_output {
+# type "null"
+# name "My Null Output"
+# mixer_type "none" # optional
+#}
+#
+###############################################################################
+
+
+# Normalization automatic volume adjustments ##################################
+#
+# This setting specifies the type of ReplayGain to use. This setting can have
+# the argument "off", "album", "track" or "auto". "auto" is a special mode that
+# chooses between "track" and "album" depending on the current state of
+# random playback. If random playback is enabled then "track" mode is used.
+# See <http://www.replaygain.org> for more details about ReplayGain.
+# This setting is off by default.
+#
+#replaygain "album"
+#
+# This setting sets the pre-amp used for files that have ReplayGain tags. By
+# default this setting is disabled.
+#
+#replaygain_preamp "0"
+#
+# This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
+# By default this setting is disabled.
+#
+#replaygain_missing_preamp "0"
+#
+# This setting enables or disables ReplayGain limiting.
+# MPD calculates actual amplification based on the ReplayGain tags
+# and replaygain_preamp / replaygain_missing_preamp setting.
+# If replaygain_limit is enabled MPD will never amplify audio signal
+# above its original level. If replaygain_limit is disabled such amplification
+# might occur. By default this setting is enabled.
+#
+#replaygain_limit "yes"
+#
+# This setting enables on-the-fly normalization volume adjustment. This will
+# result in the volume of all playing audio to be adjusted so the output has
+# equal "loudness". This setting is disabled by default.
+#
+#volume_normalization "no"
+#
+###############################################################################
+
+# Character Encoding ##########################################################
+#
+# If file or directory names do not display correctly for your locale then you
+# may need to modify this setting.
+#
+#filesystem_charset "UTF-8"
+#
+###############################################################################
+#+end_src
+
+** msmtp
+:PROPERTIES:
+:header-args+: :tangle ~/.msmtprc
+:END:
+
+#+begin_src conf
+# Set default values for all following accounts.
+defaults
+port 587
+tls on
+auth on
+#tls_trust_file /etc/ssl/certs/ca-certificates.crt
+logfile ~/.msmtp.log
+
+# amin
+account amin
+host mail.bndl.org
+# use `msmtp -a amin --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
+tls_fingerprint B8:17:DF:D7:26:56:4F:CD:F0:51:D5:E5:4C:44:B6:F1:C9:47:E7:A2:C7:36:C9:C1:F2:10:85:18:43:72:9D:ED
+tls_starttls on
+from amin@bndl.org
+user amin@bndl.org
+passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
+
+account aminb : amin
+from amin@aminb.org
+
+# gnu
+account gnu
+host fencepost.gnu.org
+# use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
+tls_fingerprint FB:DB:E3:7D:96:22:22:20:9F:4A:FD:70:96:99:50:5C:39:B2:29:D9:47:47:52:A8:5A:4A:DF:70:9D:21:DE:C4
+tls_starttls on
+from bandali@gnu.org
+user bandali
+passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
+
+# gnu (old)
+account gnu-aminb : gnu
+from aminb@gnu.org
+account gnu-amin : gnu
+from amin@gnu.org
+account gnu-mab : gnu
+from mab@gnu.org
+
+# uwaterloo
+account uwaterloo
+host connect.uwaterloo.ca
+tls_starttls on
+from abandali@uwaterloo.ca
+user abandali
+passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
+tls_trust_file /etc/ssl/certs/ca-certificates.crt
+
+# csclub
+account csclub
+host mail.csclub.uwaterloo.ca
+tls_starttls on
+from abandali@csclub.uwaterloo.ca
+user abandali
+passwordeval gpg2 --no-tty -q -d ~/.passwd/csclub.gpg
+tls_trust_file /etc/ssl/certs/ca-certificates.crt
+
+# Set a default account
+account default : amin
+#+end_src
+
+** ncmpcpp
+
+*** config
+:PROPERTIES:
+:header-args+: :tangle ~/.ncmpcpp/config
+:END:
+
+#+begin_src conf :tangle no
+##############################################################
+## This is the example configuration file. Copy it to ##
+## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
+## and set up your preferences. ##
+##############################################################
+#
+##### directories ######
+##
+## Directory for storing ncmpcpp related files.
+## Changing it is useful if you want to store
+## everything somewhere else and provide command
+## line setting for alternative location to config
+## file which defines that while launching ncmpcpp.
+##
+#
+ncmpcpp_directory = ~/.ncmpcpp
+#
+##
+## Directory for storing downloaded lyrics. It
+## defaults to ~/.lyrics since other MPD clients
+## (eg. ncmpc) also use that location.
+##
+#
+#lyrics_directory = ~/.lyrics
+#
+##### connection settings #####
+#
+#mpd_host = localhost
+#
+#mpd_port = 6600
+#
+#mpd_connection_timeout = 5
+#
+## Needed for tag editor and file operations to work.
+##
+mpd_music_dir = ~/usr/music
+#
+#mpd_crossfade_time = 5
+#
+##### music visualizer #####
+##
+## Note: In order to make music visualizer work you'll
+## need to use mpd fifo output, whose format parameter
+## has to be set to 44100:16:1 for mono visualization
+## or 44100:16:2 for stereo visualization. Example
+## configuration (it has to be put into mpd.conf):
+##
+## audio_output {
+## type "fifo"
+## name "Visualizer feed"
+## path "/tmp/mpd.fifo"
+## format "44100:16:2"
+## }
+##
+#
+visualizer_fifo_path = /tmp/mpd.fifo
+#
+##
+## Note: Below parameter is needed for ncmpcpp
+## to determine which output provides data for
+## visualizer and thus allow syncing between
+## visualization and sound as currently there
+## are some problems with it.
+##
+#
+visualizer_output_name = my fifo
+#
+##
+## If you set format to 44100:16:2, make it 'yes'.
+##
+visualizer_in_stereo = yes
+#
+##
+## Multiply received samples by given value. Very
+## useful for proper visualization of quiet music.
+##
+#visualizer_sample_multiplier = 1
+#
+##
+## Note: Below parameter defines how often ncmpcpp
+## has to "synchronize" visualizer and audio outputs.
+## 30 seconds is optimal value, but if you experience
+## synchronization problems, set it to lower value.
+## Keep in mind that sane values start with >=10.
+##
+#
+visualizer_sync_interval = 30
+#
+##
+## Note: To enable spectrum frequency visualization
+## you need to compile ncmpcpp with fftw3 support.
+##
+#
+## Available values: spectrum, wave, wave_filled, ellipse.
+##
+visualizer_type = spectrum
+#
+#visualizer_look = ●▮
+visualizer_look = "●•"
+#
+#visualizer_color = blue, cyan, green, yellow, magenta, red
+#
+## Alternative subset of 256 colors for terminals that support it.
+##
+#visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
+#
+##### system encoding #####
+##
+## ncmpcpp should detect your charset encoding
+## but if it failed to do so, you can specify
+## charset encoding you are using here.
+##
+## Note: You can see whether your ncmpcpp build
+## supports charset detection by checking output
+## of `ncmpcpp --version`.
+##
+## Note: Since MPD uses UTF-8 by default, setting
+## this option makes sense only if your encoding
+## is different.
+##
+#
+#system_encoding = ""
+#
+##### delays #####
+#
+## Time of inactivity (in seconds) after playlist
+## highlighting will be disabled (0 = always on).
+##
+#playlist_disable_highlight_delay = 5
+#
+## Defines how long messages are supposed to be visible.
+##
+#message_delay_time = 5
+#
+##### song format #####
+##
+## For a song format you can use:
+##
+## %l - length
+## %f - filename
+## %D - directory
+## %a - artist
+## %A - album artist
+## %t - title
+## %b - album
+## %y - date
+## %n - track number (01/12 -> 01)
+## %N - full track info (01/12 -> 01/12)
+## %g - genre
+## %c - composer
+## %p - performer
+## %d - disc
+## %C - comment
+## %P - priority
+## $R - begin right alignment
+##
+## If you want to make sure that a part of the format is displayed
+## only when certain tags are present, you can archieve it by
+## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
+## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
+## It is also possible to define a list of alternatives by providing
+## several groups and separating them with '|', e.g. '{%t}|{%f}'
+## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
+## present.
+##
+## Note: If you want to set limit on maximal length of a tag, just
+## put the appropriate number between % and character that defines
+## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
+##
+## In addition, formats support markers used for text attributes.
+## They are followed by character '$'. After that you can put:
+##
+## - 0 - default window color (discards all other colors)
+## - 1 - black
+## - 2 - red
+## - 3 - green
+## - 4 - yellow
+## - 5 - blue
+## - 6 - magenta
+## - 7 - cyan
+## - 8 - white
+## - 9 - end of current color
+## - b - bold text
+## - u - underline text
+## - r - reverse colors
+## - a - use alternative character set
+##
+## If you don't want to use a non-color attribute anymore, just put it
+## again, but this time insert character '/' between '$' and attribute
+## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
+## or filename with reversed colors.
+##
+## If you want to use 256 colors and/or background colors in formats
+## (the naming scheme is described below in section about color
+## definitions), it can be done with the syntax $(COLOR), e.g. to set
+## the artist tag to one of the non-standard colors and make it have
+## yellow background, you need to write $(197_yellow)%a$(end). Note
+## that for standard colors this is interchangable with attributes
+## listed above.
+##
+## Note: colors can be nested.
+##
+#
+#song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
+#
+#song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
+#
+#song_library_format = {%n - }{%t}|{%f}
+#
+#
+#alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
+#
+#alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
+#
+#now_playing_prefix = $b
+#
+#now_playing_suffix = $/b
+#
+#browser_playlist_prefix = "$2playlist$9 "
+#
+#selected_item_prefix = $6
+#
+#selected_item_suffix = $9
+#
+#modified_item_prefix = $3> $9
+#
+##
+## Note: attributes are not supported for the following variables.
+##
+#song_window_title_format = {%a - }{%t}|{%f}
+##
+## Note: Below variables are used for sorting songs in browser.
+## The sort mode determines how songs are sorted, and can be used
+## in combination with a sort format to specify a custom sorting format.
+## Available values for browser_sort_mode are "name", "mtime", "format"
+## and "noop".
+##
+#
+#browser_sort_mode = name
+#
+#browser_sort_format = {%a - }{%t}|{%f} {(%l)}
+#
+##### columns settings #####
+##
+## syntax of song columns list format is "column column etc."
+##
+## - syntax for each column is:
+##
+## (width of the column)[color of the column]{displayed tag}
+##
+## Note: Width is by default in %, if you want a column to
+## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
+## will be the column that take 10% of screen (so the real width
+## will depend on actual screen size), whereas (10f)[white]{a}
+## will take 10 terminal cells, no matter how wide the screen is.
+##
+## - color is optional (if you want the default one,
+## leave the field empty).
+##
+## Note: You can give a column additional attributes by putting appropriate
+## character after displayed tag character. Available attributes are:
+##
+## - r - column will be right aligned
+## - E - if tag is empty, empty tag marker won't be displayed
+##
+## You can also:
+##
+## - give a column custom name by putting it after attributes,
+## separated with character ':', e.g. {lr:Length} gives you
+## right aligned column of lengths named "Length".
+##
+## - define sequence of tags, that have to be displayed in case
+## predecessor is empty in a way similar to the one in classic
+## song format, i.e. using '|' character, e.g. {a|c|p:Owner}
+## creates column named "Owner" that tries to display artist
+## tag and then composer and performer if previous ones are
+## not available.
+##
+#
+#song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
+#
+##### various settings #####
+#
+##
+## Note: Custom command that will be executed each
+## time song changes. Useful for notifications etc.
+##
+#execute_on_song_change = ""
+#
+#playlist_show_mpd_host = no
+#
+#playlist_show_remaining_time = no
+#
+#playlist_shorten_total_times = no
+#
+#playlist_separate_albums = no
+#
+##
+## Note: Possible display modes: classic, columns.
+##
+#playlist_display_mode = columns
+#
+#browser_display_mode = classic
+#
+#search_engine_display_mode = classic
+#
+#playlist_editor_display_mode = classic
+#
+#discard_colors_if_item_is_selected = yes
+#
+#incremental_seeking = yes
+#
+#seek_time = 1
+#
+#volume_change_step = 2
+#
+#autocenter_mode = no
+#
+#centered_cursor = no
+#
+##
+## Note: You can specify third character which will
+## be used to build 'empty' part of progressbar.
+##
+#progressbar_look = =>
+progressbar_look = "─╼╶"
+#progressbar_look = "─⊙╶"
+#
+#progressbar_boldness = yes
+#
+## Available values: database, playlist.
+##
+#default_place_to_search_in = database
+#
+## Available values: classic, alternative.
+##
+#user_interface = classic
+#
+#data_fetching_delay = yes
+#
+## Available values: artist, album_artist, date, genre, composer, performer.
+##
+#media_library_primary_tag = artist
+#
+## Available values: wrapped, normal.
+##
+#default_find_mode = wrapped
+#
+#default_tag_editor_pattern = %n - %t
+#
+#header_visibility = yes
+#
+#statusbar_visibility = yes
+#
+#titles_visibility = yes
+#
+#header_text_scrolling = yes
+#
+#cyclic_scrolling = no
+#
+#lines_scrolled = 2
+#
+#follow_now_playing_lyrics = no
+#
+#fetch_lyrics_for_current_song_in_background = no
+#
+#store_lyrics_in_song_dir = no
+#
+#generate_win32_compatible_filenames = yes
+#
+#allow_for_physical_item_deletion = no
+#
+##
+## Note: If you set this variable, ncmpcpp will try to
+## get info from last.fm in language you set and if it
+## fails, it will fall back to english. Otherwise it will
+## use english the first time.
+##
+## Note: Language has to be expressed as an ISO 639 alpha-2 code.
+##
+#lastfm_preferred_language = en
+#
+#show_hidden_files_in_local_browser = no
+#
+##
+## How shall screen switcher work?
+##
+## - "previous" - switch between the current and previous screen.
+## - "screen1,...,screenN" - switch between given sequence of screens.
+##
+## Screens available for use: help, playlist, browser, search_engine,
+## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
+##
+#screen_switcher_mode = playlist, browser
+#
+##
+## Note: You can define startup screen
+## by choosing screen from the list above.
+##
+#startup_screen = playlist
+#
+##
+## Note: You can define startup slave screen
+## by choosing screen from the list above or
+## an empty value for no slave screen.
+##
+#startup_slave_screen = ""
+#
+#startup_slave_screen_focus = no
+#
+##
+## Default width of locked screen (in %).
+## Acceptable values are from 20 to 80.
+##
+#
+#locked_screen_width_part = 50
+#
+#ask_for_locked_screen_width_part = yes
+#
+#jump_to_now_playing_song_at_start = yes
+#
+#ask_before_clearing_playlists = yes
+#
+#clock_display_seconds = no
+#
+#display_volume_level = yes
+#
+#display_bitrate = no
+#
+#display_remaining_time = no
+#
+## Available values: none, basic, extended, perl.
+##
+#regular_expressions = perl
+#
+##
+## Note: If below is enabled, ncmpcpp will ignore leading
+## "The" word while sorting items in browser, tags in
+## media library, etc.
+##
+#ignore_leading_the = no
+#
+#block_search_constraints_change_if_items_found = yes
+#
+#mouse_support = yes
+#
+#mouse_list_scroll_whole_page = yes
+#
+#empty_tag_marker = <empty>
+#
+#tags_separator = " | "
+#
+#tag_editor_extended_numeration = no
+#
+#media_library_sort_by_mtime = no
+#
+#enable_window_title = yes
+#
+##
+## Note: You can choose default search mode for search
+## engine. Available modes are:
+##
+## - 1 - use mpd built-in searching (no regexes, pattern matching)
+## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
+## but if your mpd is on a remote machine, downloading big database
+## to process it can take a while
+## - 3 - match only exact values (this mode uses mpd function for searching
+## in database and local one for searching in current playlist)
+##
+#
+#search_engine_default_search_mode = 1
+#
+#external_editor = nano
+#
+## Note: set to yes if external editor is a console application.
+##
+#use_console_editor = yes
+#
+##### colors definitions #####
+##
+## It is possible to set a background color by setting a color
+## value "<foreground>_<background>", e.g. red_black will set
+## foregound color to red and background color to black.
+##
+## In addition, for terminals that support 256 colors it
+## is possible to set one of them by using a number in range
+## [1, 256] instead of color name, e.g. numerical value
+## corresponding to red_black is 2_1. To find out if the
+## terminal supports 256 colors, run ncmpcpp and check out
+## the bottom of the help screen for list of available colors
+## and their numerical values.
+##
+## Note: due to technical limitations of ncurses, if 256 colors
+## are used, it is possible to either use only the colors with
+## default background color, or all pairs from 1_1 up to 254_127,
+## depending on the ncurses version used.
+##
+#
+#colors_enabled = yes
+#
+#empty_tag_color = cyan
+#
+#header_window_color = default
+#
+#volume_color = default
+#
+#state_line_color = default
+#
+#state_flags_color = default
+#
+#main_window_color = yellow
+#
+#color1 = white
+#
+#color2 = green
+#
+#main_window_highlight_color = yellow
+#
+#progressbar_color = black
+#
+#progressbar_elapsed_color = green
+#
+#statusbar_color = default
+#
+#alternative_ui_separator_color = black
+#
+#active_column_color = red
+#
+#window_border_color = green
+#
+#active_window_border = red
+#
+#+end_src
+
+*** bindings
+:PROPERTIES:
+:header-args+: :tangle ~/.ncmpcpp/bindings
+:END:
+
+#+begin_src conf :tangle no
+def_key "j"
+ scroll_down
+def_key "k"
+ scroll_up
+
+def_key "ctrl-u"
+ page_up
+def_key "ctrl-d"
+ page_down
+
+def_key "h"
+ previous_column
+def_key "l"
+ next_column
+
+def_key "."
+ show_lyrics
+
+def_key "n"
+ next_found_item
+def_key "N"
+ previous_found_item
+
+def_key "J"
+ move_sort_order_down
+def_key "K"
+ move_sort_order_up
+#+end_src
+
+** notmuch
+
+*** notmuch-config
+:PROPERTIES:
+:header-args+: :tangle ~/.notmuch-config
+:END:
+
+#+begin_src conf
+# .notmuch-config - Configuration file for the notmuch mail system
+#
+# For more information about notmuch, see https://notmuchmail.org
+
+# Database configuration
+#
+# The only value supported here is 'path' which should be the top-level
+# directory where your mail currently exists and to where mail will be
+# delivered in the future. Files should be individual email messages.
+# Notmuch will store its database within a sub-directory of the path
+# configured here named ".notmuch".
+#
+[database]
+path=/home/amin/oldmail
+
+# User configuration
+#
+# Here is where you can let notmuch know how you would like to be
+# addressed. Valid settings are
+#
+# name Your full name.
+# primary_email Your primary email address.
+# other_email A list (separated by ';') of other email addresses
+# at which you receive email.
+#
+# Notmuch will use the various email addresses configured here when
+# formatting replies. It will avoid including your own addresses in the
+# recipient list of replies, and will set the From address based on the
+# address to which the original email was addressed.
+#
+[user]
+name=Amin Bandali
+primary_email=amin@aminb.org
+other_email=bandali@gnu.org;abandali@uwaterloo.ca;
+
+# Configuration for "notmuch new"
+#
+# The following options are supported here:
+#
+# tags A list (separated by ';') of the tags that will be
+# added to all messages incorporated by "notmuch new".
+#
+# ignore A list (separated by ';') of file and directory names
+# that will not be searched for messages by "notmuch new".
+#
+# NOTE: *Every* file/directory that goes by one of those
+# names will be ignored, independent of its depth/location
+# in the mail store.
+#
+[new]
+tags=new;
+#tags=unread;inbox;
+ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
+
+# Search configuration
+#
+# The following option is supported here:
+#
+# exclude_tags
+# A ;-separated list of tags that will be excluded from
+# search results by default. Using an excluded tag in a
+# query will override that exclusion.
+#
+[search]
+exclude_tags=deleted;spam;
+
+# Maildir compatibility configuration
+#
+# The following option is supported here:
+#
+# synchronize_flags Valid values are true and false.
+#
+# If true, then the following maildir flags (in message filenames)
+# will be synchronized with the corresponding notmuch tags:
+#
+# Flag Tag
+# ---- -------
+# D draft
+# F flagged
+# P passed
+# R replied
+# S unread (added when 'S' flag is not present)
+#
+# The "notmuch new" command will notice flag changes in filenames
+# and update tags, while the "notmuch tag" and "notmuch restore"
+# commands will notice tag changes and update flags in filenames
+#
+[maildir]
+synchronize_flags=true
+
+# Cryptography related configuration
+#
+# The following option is supported here:
+#
+# gpg_path
+# binary name or full path to invoke gpg.
+#
+[crypto]
+gpg_path=gpg
+#+end_src
+
+*** pre-new hook
+:PROPERTIES:
+:header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
+:END:
+
+#+begin_src sh
+touch /tmp/gnusieve.log
+sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
+ -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
+#+end_src
+
+*** post-new hook
+:PROPERTIES:
+:header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
+:END:
+
+#+begin_src sh
+# apply sent tag to messages sent by me
+notmuch tag -new +sent -- from:amin@aminb.org or from:bandali@gnu.org or from:aminb@gnu.org or from:amin@gnu.org or from:mab@gnu.org or from:abandali@uwaterloo.ca
+
+# initial tagging
+notmuch tag -latest -- tag:latest
+notmuch tag +inbox +unread +latest -new -- tag:new
+
+
+# apply tags to lists
+
+# <aminb>
+notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
+notmuch tag -inbox +lists/haskell-weekly -- folder:amin/lists/haskell-weekly
+
+notmuch tag -inbox +pay -- folder:amin/pay
+notmuch tag -inbox +banking -- folder:amin/banking
+notmuch tag -inbox +work -- folder:amin/work
+# </aminb>
+
+# <uw>
+notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
+notmuch tag -inbox +uw/cs846 -- folder:uwaterloo/lists/cs846
+notmuch tag -inbox +uw/ece750 -- folder:uwaterloo/lists/ece750
+notmuch tag -inbox +uw/se212 -- folder:uwaterloo/lists/se212
+notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
+
+notmuch tag -inbox +lists/alloytools -- folder:uwaterloo/lists/alloytools
+notmuch tag -inbox +lists/clvsingle -- folder:uwaterloo/lists/Clvsingle
+notmuch tag -inbox +lists/gsa -- folder:uwaterloo/lists/GSA
+notmuch tag -inbox +lists/math-grad -- folder:uwaterloo/lists/Math-grad
+notmuch tag -inbox +lists/scs-grads -- folder:uwaterloo/lists/scs-grads
+notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
+# </uw>
+
+# <gnu>
+notmuch tag -inbox +l/emacs-devel -- folder:gnu/l/emacs-devel
+notmuch tag -inbox +l/emacs-orgmode -- folder:gnu/l/emacs-orgmode
+notmuch tag -inbox +l/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
+notmuch tag -inbox +l/fencepost-users -- folder:gnu/l/fencepost-users
+notmuch tag -inbox +l/guix-devel -- folder:gnu/l/guix-devel
+notmuch tag -inbox +l/guile-devel -- folder:gnu/l/guile-devel
+notmuch tag -inbox +l/help-gnu-emacs -- folder:gnu/l/help-gnu-emacs
+notmuch tag -inbox +l/info-gnu-emacs -- folder:gnu/l/info-gnu-emacs
+notmuch tag -inbox +l/www-commits -- folder:gnu/l/www-commits
+notmuch tag -inbox +l/www-discuss -- folder:gnu/l/www-discuss
+notmuch tag -inbox +webmasters -- folder:gnu/webmasters
+
+notmuch tag -inbox +l/deepspec -- folder:gnu/l/deepspec
+notmuch tag -inbox +l/haskell-cafe -- folder:gnu/l/haskell-cafe
+notmuch tag -inbox +l/haskell-art -- folder:gnu/l/haskell-art
+notmuch tag -inbox +l/notmuch -- folder:gnu/l/notmuch
+
+notmuch tag -inbox +l/~aminb/test-priv -- folder:gnu/l/~aminb/test-priv
+notmuch tag -inbox +l/~sircmpwn/sr.ht-admins -- folder:gnu/l/~sircmpwn/sr.ht-admins
+notmuch tag -inbox +l/~sircmpwn/sr.ht-announce -- folder:gnu/l/~sircmpwn/sr.ht-announce
+notmuch tag -inbox +l/~sircmpwn/sr.ht-dev -- folder:gnu/l/~sircmpwn/sr.ht-dev
+notmuch tag -inbox +l/~sircmpwn/sr.ht-discuss -- folder:gnu/l/~sircmpwn/sr.ht-discuss
+# </gnu>
+
+notmuch tag -inbox -unread +archive/notmuch -- path:archive/notmuch/**
+notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**
+#+end_src
+
+*** notmuch.service
+:PROPERTIES:
+:header-args+: :tangle ~/.config/systemd/user/notmuch.service
+:END:
+
+#+begin_src conf :tangle no
+[Unit]
+Description=notmuch service
+
+[Service]
+Type=oneshot
+ExecStart=/usr/bin/notmuch new
+StandardOutput=syslog
+StandardError=syslog
+#+end_src
+
+*** notmuch.timer
+:PROPERTIES:
+:header-args+: :tangle ~/.config/systemd/user/notmuch.timer
+:END:
+
+#+begin_src conf :tangle no
+[Unit]
+Description=notmuch timer
+
+[Timer]
+OnCalendar=*:0/5
+Persistent=true
+Unit=notmuch.service
+
+[Install]
+WantedBy=timers.target
+#+end_src
+
+** pacman
+
+*** conf
+
+#+begin_src conf :tangle /sudo::/etc/pacman.conf :comments none
+#
+# /etc/pacman.conf
+#
+# See the pacman.conf(5) manpage for option and repository directives
+
+#
+# GENERAL OPTIONS
+#
+[options]
+# The following paths are commented out with their default values listed.
+# If you wish to use different paths, uncomment and update the paths.
+#RootDir = /
+#DBPath = /var/lib/pacman/
+#CacheDir = /var/cache/pacman/pkg/
+#LogFile = /var/log/pacman.log
+#GPGDir = /etc/pacman.d/gnupg/
+#HookDir = /etc/pacman.d/hooks/
+HoldPkg = pacman glibc
+#XferCommand = /usr/bin/curl -L -C - -f -o %o %u
+#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
+#CleanMethod = KeepInstalled
+#UseDelta = 0.7
+Architecture = auto
+
+# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
+#IgnorePkg =
+#IgnoreGroup =
+
+#NoUpgrade =
+#NoExtract =
+
+# Misc options
+#UseSyslog
+Color
+TotalDownload
+CheckSpace
+VerbosePkgLists
+
+# By default, pacman accepts packages signed by keys that its local keyring
+# trusts (see pacman-key and its man page), as well as unsigned packages.
+SigLevel = Required DatabaseOptional
+LocalFileSigLevel = Optional
+#RemoteFileSigLevel = Required
+
+# NOTE: You must run `pacman-key --init` before first using pacman; the local
+# keyring can then be populated with the keys of all Arch/Parabola packagers
+# with `pacman-key --populate archlinux` and `pacman-key --populate parabola`.
+
+#
+# REPOSITORIES
+# - can be defined here or included from another file
+# - pacman will search repositories in the order defined here
+# - local/custom mirrors can be added here or in separate files
+# - repositories listed first will take precedence when packages
+# have identical names, regardless of version number
+# - URLs will have $repo replaced by the name of the current repo
+# - URLs will have $arch replaced by the name of the architecture
+#
+# Repository entries are of the format:
+# [repo-name]
+# Server = ServerName
+# Include = IncludePath
+#
+# The header [repo-name] is crucial - it must be present and
+# uncommented to enable the repo.
+#
+
+# The testing repositories are disabled by default. To enable, uncomment the
+# repo name header and Include lines. You can add preferred servers immediately
+# after the header, and they will be used before the default mirrors.
+
+# NOTE: Nonprism is a particular repository that aims to provide software built
+# and patched without services under global data surveillance programs like PRISM,
+# XKeyscore and Tempora. For more info see: https://wiki.parabola.nu/Nonprism
+
+#[nonprism-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+#[nonprism]
+#Include = /etc/pacman.d/mirrorlist
+
+[libre-testing]
+Include = /etc/pacman.d/mirrorlist
+
+[libre]
+Include = /etc/pacman.d/mirrorlist
+
+#[testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[core]
+Include = /etc/pacman.d/mirrorlist
+
+[extra]
+Include = /etc/pacman.d/mirrorlist
+
+#[community-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[community]
+Include = /etc/pacman.d/mirrorlist
+
+# The PCR (Parabola Community Repository) contains packages maintained by trusted
+# members of the Parabola community. It also contains packages maintained by
+# Parabola developers, but that the developer decided didn't belong in core/libre.
+
+#[pcr-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[pcr]
+Include = /etc/pacman.d/mirrorlist
+
+# If you want to run 32 bit applications on your x86_64 system,
+# enable the libre-multilib, multilib and pcr-multilib repositories as required here.
+
+#[nonprism-multilib-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+#[nonprism-multilib]
+#Include = /etc/pacman.d/mirrorlist
+
+#[libre-multilib-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+#[libre-multilib]
+#Include = /etc/pacman.d/mirrorlist
+
+#[multilib-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+#[multilib]
+#Include = /etc/pacman.d/mirrorlist
+
+#[pcr-multilib-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+#[pcr-multilib]
+#Include = /etc/pacman.d/mirrorlist
+
+# Parabola also supports another community projects and personal repositories, to
+# find them check out this wiki page: https://wiki.parabola.nu/Repositories
+
+# An example of a custom package repository. See the pacman manpage for
+# tips on creating your own repositories.
+#[custom]
+#SigLevel = Optional TrustAll
+#Server = file:///home/custompkgs
+
+Include = /etc/pacman.d/*.conf
+#+end_src
+
+*** mirrorlist
+
+#+begin_src conf :tangle /sudo::/etc/pacman.d/mirrorlist :comments none
+# Parabola GNU/Linux-libre - Last Updated: Wed Dec 20 02:59:35 GMT 2017
+
+Server = http://mirror.fsf.org/parabola/$repo/os/$arch
+Server = http://mirror.fsf.org/parabola/$repo/os/$arch
+Server = http://mirror.fsf.org/parabola/$repo/os/$arch
+Server = http://mirror.fsf.org/parabola/$repo/os/$arch
+
+# Location: London, UK
+# Responsible: Parabola Project
+# Note: Not really a mirror, automatically redirects you to an Arch
+# mirror when possible. Works best specifying it a few times in a
+# row (404s workaround).
+# Server = http://redirector.parabola.nu/$repo/os/$arch
+Server = https://redirector.parabola.nu/$repo/os/$arch
+
+# Location: Reykjavík, Iceland
+# Responsible: Parabola Project
+# Note: Not really a mirror, automatically redirects you to a Parabola
+# mirror that has the file you are looking for.
+# Server = http://repomirror.parabola.nu/$repo/os/$arch
+Server = https://repomirror.parabola.nu/$repo/os/$arch
+
+# Location: Falkenstein, Germany
+# Server = http://mirror.grapentin.org/parabola/$repo/os/$arch
+Server = https://mirror.grapentin.org/parabola/$repo/os/$arch
+
+# Location: Volendam, Netherlands
+Server = https://jeweet.net/repo/parabola/$repo/os/$arch
+
+# Location: Amsterdam, Netherlands
+# Note: Not really a mirror, but a high-speed 10GiB cache for
+# mirror.yandex.ru/mirrors/parabola
+# Server = http://parabola.isacdaavid.info:8080/$repo/os/$arch
+Server = https://parabola.isacdaavid.info:8081/$repo/os/$arch
+
+# Location: Moscow, Russian Federation
+# Server = http://mirror.yandex.ru/mirrors/parabola/$repo/os/$arch
+Server = https://mirror.yandex.ru/mirrors/parabola/$repo/os/$arch
+
+# Location: Ho Chi Minh City, Vietnam
+# Server = http://mirror.freedif.org/Parabola/$repo/os/$arch
+Server = https://mirror.freedif.org/Parabola/$repo/os/$arch
+
+# Location: Los Angeles, CA, USA
+# Note: Also visit http://alfplayer.com/ for its SNAPSHOTS ARCHIVE
+Server = http://alfplayer.com/parabola/$repo/os/$arch
+
+# Location: Boston, MA, USA
+Server = http://mirror.fsf.org/parabola/$repo/os/$arch
+
+# Location: Austin, TX, USA
+# Server = http://parabola.serverpit.com/
+Server = https://parabola.serverpit.com/
+
+# Location: Reykjavík, Iceland
+# Responsible: Parabola Project
+# Note: Currently pointing to repomirror.parabola.nu
+# Server = http://repo.parabola.nu/$repo/os/$arch
+Server = https://repo.parabola.nu/$repo/os/$arch
+#+end_src
+
+** pigeonhole
+*** amin.sieve
+:PROPERTIES:
+:header-args+: :tangle ~/mail/bndl.org/amin/sieve/amin.sieve :comments none
+:END:
+
+#+begin_src conf
+require ["regex", "variables", "fileinto", "envelope",
+ "mailbox", "imap4flags", "include"];
+
+# webmasters
+if anyof (
+ address :is "from" ["webmasters@gnu.org", "webmasters-comment@gnu.org"]) {
+ fileinto :create "gnu.webmasters";
+ stop;
+}
+
+include :personal "lists";
+#+end_src
+
+*** lists.sieve
+:PROPERTIES:
+:header-args+: :tangle ~/mail/bndl.org/amin/sieve/lists.sieve :comments none
+:END:
+
+#+begin_src conf
+require ["regex", "variables", "fileinto", "envelope",
+ "mailbox", "imap4flags", "include"];
+
+# mailing lists
+if anyof (
+ header :contains "list-id"
+ [ "<emacs-devel.gnu.org>"
+ , "<emacs-orgmode.gnu.org>"
+ , "<emacsconf-discuss.gnu.org>"
+ , "<fencepost-users.gnu.org>"
+ , "<guix-devel.gnu.org>"
+ , "<guile-devel.gnu.org>"
+ , "<help-gnu-emacs.gnu.org>"
+ , "<info-gnu-emacs.gnu.org>"
+ , "<info-guix.gnu.org>"
+ , "<www-commits.gnu.org>"
+ , "<www-discuss.gnu.org>"
+ , "<deepspec.lists.cs.princeton.edu>"
+ , "<haskell-cafe.haskell.org>"
+ , "<haskell-art.we.lurk.org>"
+ , "<notmuch.notmuchmail.org>"
+ ] ) {
+ if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
+ set :lower "listname" "${1}";
+ fileinto :create "gnu.${listname}";
+ stop;
+ }
+}
+
+# sr.ht lists, with dots ('.') omitted
+if anyof (
+ header :contains "list-id"
+ [ "<~bandali/public-inbox@lists.sr.ht>"
+ , "<~sircmpwn/sr.ht-admins@lists.sr.ht>"
+ , "<~sircmpwn/sr.ht-announce@lists.sr.ht>"
+ , "<~sircmpwn/sr.ht-dev@lists.sr.ht>"
+ , "<~sircmpwn/sr.ht-discuss@lists.sr.ht>"
+ ] ) {
+ if header :regex "list-id" "(~[a-z_0-9-]+)/([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)@" {
+ set :lower "username" "${1}";
+ set :lower "listname" "${2}${3}${4}${5}${6}${7}";
+ fileinto :create "gnu.${username}.${listname}";
+ stop;
+ }
+}
+#+end_src
+
+** PowerTOP
+:PROPERTIES:
+:header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
+:END:
+
+#+begin_src conf
+[Unit]
+Description=Powertop tunings
+
+[Service]
+ExecStart=/usr/bin/powertop --auto-tune
+RemainAfterExit=true
+
+[Install]
+WantedBy=multi-user.target
+#+end_src
+
+** redshift
+:PROPERTIES:
+:header-args+: :tangle ~/.config/redshift.conf :comments none
+:END:
+
+#+begin_src conf
+; Global settings for redshift
+[redshift]
+; Set the day and night screen temperatures (Neutral is 6500K)
+;temp-day=5700
+;temp-night=3500
+
+;temp-day=6500
+temp-day=6200
+;temp-night=4800
+;temp-night=5000
+;temp-night=4500
+temp-night=4000
+
+; Enable/Disable a smooth transition between day and night
+; 0 will cause a direct change from day to night screen temperature.
+; 1 will gradually increase or decrease the screen temperature.
+transition=1
+
+; Set the screen brightness. Default is 1.0.
+;brightness=0.9
+; It is also possible to use different settings for day and night
+; since version 1.8.
+;brightness-day=0.7
+;brightness-night=0.4
+; Set the screen gamma (for all colors, or each color channel
+; individually)
+;gamma=0.8
+;gamma=1.0
+;gamma=0.8:0.7:0.8
+; This can also be set individually for day and night since
+; version 1.10.
+;gamma-day=0.8:0.7:0.8
+;gamma-night=0.6
+
+; Set the location-provider: 'geoclue2' or 'manual'
+; type 'redshift -l list' to see possible values.
+; The location provider settings are in a different section.
+;location-provider=manual
+location-provider=geoclue2
+
+; Set the adjustment-method: 'randr', 'vidmode'
+; type 'redshift -m list' to see all possible values.
+; 'randr' is the preferred method, 'vidmode' is an older API.
+; but works in some cases when 'randr' does not.
+; The adjustment method settings are in a different section.
+adjustment-method=randr
+
+; Configuration of the location-provider:
+; type 'redshift -l PROVIDER:help' to see the settings.
+; ex: 'redshift -l manual:help'
+; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
+; are negative numbers.
+;[manual]
+;lat=48.1
+;lon=11.6
+
+; Configuration of the adjustment-method
+; type 'redshift -m METHOD:help' to see the settings.
+; ex: 'redshift -m randr:help'
+; In this example, randr is configured to adjust screen 1.
+; Note that the numbering starts from 0, so this is actually the
+; second screen. If this option is not specified, Redshift will try
+; to adjust _all_ screens.
+;[randr]
+;screen=1
+#+end_src
+
+** rofi
+:PROPERTIES:
+:header-args+: :tangle ~/.config/rofi/config
+:END:
+
+#+begin_src conf
+! rofi.font: Ubuntu Mono 13
+! rofi.font: Inconsolata 16
+! rofi.font: Iosevka 13
+! rofi.font: Source Code Pro 11
+rofi.font: Source Code Pro 10.5
+rofi.modi: run,window
+! rofi.width: 640
+rofi.width: 600
+!rofi.location: 2
+!rofi.yoffset: 200
+rofi.monitor: -1
+!rofi.lines: 10
+
+!rofi.theme: /usr/share/rofi/themes//Arc.rasi
+!rofi.theme: /usr/share/rofi/themes//Paper.rasi
+!rofi.theme: /usr/share/rofi/themes//sidebar.rasi
+
+rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
+#+end_src
+
+** rofi-pass
+:PROPERTIES:
+:header-args+: :tangle ~/.config/rofi-pass/config
+:END:
+
+#+begin_src conf
+# permanently set alternative root dir
+# root=/path/to/root
+
+# rofi command. Make sure to have "$@" as last argument
+_rofi () {
+ #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
+ rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
+}
+
+# xdotool needs the keyboard layout to be set using setxkbmap
+# You can do this in your autostart scripts (e.g. xinitrc)
+
+# If for some reason, you cannot do this, you can set the command here.
+# and set fix_layout to true
+fix_layout=false
+
+layout_cmd () {
+ setxkbmap us
+}
+
+# fields to be used
+URL_field='url'
+USERNAME_field='user'
+AUTOTYPE_field='autotype'
+
+# delay to be used for :delay keyword
+delay=2
+
+## Programs to be used
+# Editor
+EDITOR='gvim -f'
+
+# Browser
+BROWSER='chromium'
+
+## Misc settings
+
+default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
+auto_enter='false'
+notify='false'
+default_autotype='user :tab pass'
+
+# color of the help messages
+# leave empty for autodetection
+help_color="#4872FF"
+
+# Clipboard settings
+# Possible options: primary, clipboard, both
+clip=primary
+
+# Options for generating new password entries
+# default_user is also used for password files that have no user field.
+default_user=aminb
+default_user2=bandali
+password_length=30
+
+# Custom Keybindings
+#autotype="Alt+1"
+autotype="Alt+m"
+type_user="Alt+2"
+type_pass="Alt+3"
+open_url="Alt+4"
+copy_name="Alt+u"
+copy_url="Alt+l"
+copy_pass="Alt+p"
+show="Alt+o"
+copy_entry="Alt+2"
+type_entry="Alt+1"
+copy_menu="Alt+c"
+action_menu="Alt+a"
+type_menu="Alt+t"
+help="Alt+h"
+switch="Alt+x"
+insert_pass="Alt+n"
+#+end_src
+
+** sway
+
+*** main
+:PROPERTIES:
+:header-args+: :tangle ~/.config/sway/config
+:END:
+
+#+begin_src conf
+### Variables
+# super
+set $mod Mod4
+# alt
+set $mod2 Mod1
+set $left h
+set $down j
+set $up k
+set $right l
+set $term alacritty
+set $term2 urxvt
+set $menu rofi -show run -display-run '> ' -display-window ' 🗔 '
+
+### Output configuration
+#
+# Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/)
+output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
+#
+# Example configuration:
+#
+# output HDMI-A-1 resolution 1920x1080 position 1920,0
+#
+# You can get the names of your outputs by running: swaymsg -t get_outputs
+
+output DP-1 res 2560x1440 pos 0,0
+# 597 = (2560/2) - (1366/2)
+output LVDS-1 pos 597,1440
+
+### Idle configuration
+
+exec swayidle \
+ timeout 120 '[ -f ~/.nosleep ] || swaymsg "output * dpms off"' \
+ resume '[ -f ~/.nosleep ] || swaymsg "output * dpms on"' \
+
+
+### Key bindings
+#
+# Basics:
+#
+ # start a terminal
+ bindsym $mod+Return exec $term
+ bindsym $mod+Shift+Return exec $term2
+
+ # kill focused window
+ bindsym $mod+Shift+q kill
+
+ # start your launcher
+ bindsym $mod+d exec $menu
+
+ # password manager
+ bindsym $mod2+space exec rofi-pass
+
+ # Drag floating windows by holding down $mod and left mouse button.
+ # Resize them with right mouse button + $mod.
+ # Despite the name, also works for non-floating windows.
+ # Change normal to inverse to use left mouse button for resizing and right
+ # mouse button for dragging.
+ floating_modifier $mod normal
+
+ # reload the configuration file
+ bindsym $mod+Shift+c reload
+
+ # exit sway (logs you out of your wayland session)
+ # bindsym $mod+Shift+e exit
+
+ bindsym $mod+apostrophe exec rofi-light # rofi-based brightness chooser
+ bindsym XF86MonBrightnessUp exec light -A 5 # increase screen brightness
+ bindsym XF86MonBrightnessDown exec light -U 5 # decrease screen brightness
+
+ bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
+ bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
+ bindsym XF86AudioMute exec pamixer --toggle-mute
+ bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
+
+ bindsym $mod+Shift+apostrophe exec rofi-remmina.py # choose remmina connection
+
+ # original sway workspace switch and window move
+ bindsym $mod+bracketleft workspace prev
+ bindsym $mod+bracketright workspace next
+ bindsym $mod+braceleft move container to workspace prev
+ bindsym $mod+braceright move container to workspace next
+
+ # bspwm-esque workspace switch and window move
+ bindsym $mod2+bracketleft exec sway-ws-util switch prev
+ bindsym $mod2+bracketright exec sway-ws-util switch next
+ bindsym $mod2+braceleft exec sway-ws-util move prev follow
+ bindsym $mod2+braceright exec sway-ws-util move next follow
+#
+# Moving around:
+#
+ # Move your focus around
+ bindsym $mod+$left focus left
+ bindsym $mod+$down focus down
+ bindsym $mod+$up focus up
+ bindsym $mod+$right focus right
+ # or use $mod+[up|down|left|right]
+ bindsym $mod+Left focus left
+ bindsym $mod+Down focus down
+ bindsym $mod+Up focus up
+ bindsym $mod+Right focus right
+
+ # _move_ the focused window with the same, but add Shift
+ bindsym $mod+Shift+$left move left
+ bindsym $mod+Shift+$down move down
+ bindsym $mod+Shift+$up move up
+ bindsym $mod+Shift+$right move right
+ # ditto, with arrow keys
+ bindsym $mod+Shift+Left move left
+ bindsym $mod+Shift+Down move down
+ bindsym $mod+Shift+Up move up
+ bindsym $mod+Shift+Right move right
+#
+# Workspaces:
+#
+ # switch to workspace
+ bindsym $mod+1 workspace 1
+ bindsym $mod+2 workspace 2
+ bindsym $mod+3 workspace 3
+ bindsym $mod+4 workspace 4
+ bindsym $mod+5 workspace 5
+ bindsym $mod+6 workspace 6
+ bindsym $mod+7 workspace 7
+ bindsym $mod+8 workspace 8
+ bindsym $mod+9 workspace 9
+ bindsym $mod+0 workspace 10
+ # move focused container to workspace
+ bindsym $mod+Shift+1 move container to workspace 1
+ bindsym $mod+Shift+2 move container to workspace 2
+ bindsym $mod+Shift+3 move container to workspace 3
+ bindsym $mod+Shift+4 move container to workspace 4
+ bindsym $mod+Shift+5 move container to workspace 5
+ bindsym $mod+Shift+6 move container to workspace 6
+ bindsym $mod+Shift+7 move container to workspace 7
+ bindsym $mod+Shift+8 move container to workspace 8
+ bindsym $mod+Shift+9 move container to workspace 9
+ bindsym $mod+Shift+0 move container to workspace 10
+ # Note: workspaces can have any name you want, not just numbers.
+ # We just use 1-10 as the default.
+#
+# Layout stuff:
+#
+ # You can "split" the current object of your focus with
+ # $mod+b or $mod+v, for horizontal and vertical splits
+ # respectively.
+ bindsym $mod+b splith
+ bindsym $mod+v splitv
+
+ # Switch the current container between different layout styles
+ bindsym $mod+s layout stacking
+ bindsym $mod+w layout tabbed
+ bindsym $mod+e layout toggle split
+
+ # Make the current focus fullscreen
+ bindsym $mod+f fullscreen
+
+ # Toggle sticky-ness of the current (floating) window
+ bindsym $mod+$mod2+space sticky toggle
+
+ # Toggle the current focus between tiling and floating mode
+ bindsym $mod+Shift+space floating toggle
+
+ # Swap focus between the tiling area and the floating area
+ bindsym $mod+space focus mode_toggle
+
+ # move focus to the parent container
+ bindsym $mod+a focus parent
+#
+# Scratchpad:
+#
+ # Sway has a "scratchpad", which is a bag of holding for windows.
+ # You can send windows there and get them back later.
+
+ # Move the currently focused window to the scratchpad
+ bindsym $mod+Shift+minus move scratchpad
+
+ # Show the next scratchpad window or hide the focused scratchpad window.
+ # If there are multiple scratchpad windows, this command cycles through them.
+ bindsym $mod+minus scratchpad show
+#
+# Resizing containers:
+#
+mode "resize" {
+ # left will shrink the containers width
+ # right will grow the containers width
+ # up will shrink the containers height
+ # down will grow the containers height
+ bindsym $left resize shrink width 10px
+ bindsym $down resize grow height 10px
+ bindsym $up resize shrink height 10px
+ bindsym $right resize grow width 10px
+
+ # ditto, with arrow keys
+ bindsym Left resize shrink width 10px
+ bindsym Down resize grow height 10px
+ bindsym Up resize shrink height 10px
+ bindsym Right resize grow width 10px
+
+ # return to default mode
+ bindsym Return mode "default"
+ bindsym Escape mode "default"
+}
+bindsym $mod+Shift+r mode "resize"
+
+#
+# Power button
+#
+
+set $mode_system System (l)ock, (e)xit sway, (s)uspend, (h)ibernate, (r)eboot, (S)hutdown
+mode "$mode_system" {
+ bindsym l exec swaylock, mode "default"
+ bindsym e exec swaymsg exit, mode "default"
+ bindsym s exec systemctl suspend, mode "default"
+ bindsym h exec systemctl hibernate, mode "default"
+ bindsym r exec systemctl reboot, mode "default"
+ bindsym Shift+s exec systemctl poweroff -i, mode "default"
+
+ # back to normal: Enter, Escape, or q
+ bindsym Return mode "default"
+ bindsym Escape mode "default"
+ bindsym q mode "default"
+}
+# bindsym XF86PowerOff mode "$mode_system"
+bindsym $mod+Shift+e mode "$mode_system"
+
+#
+# Presentation mode
+#
+
+bindsym $mod+$mod2+p exec ([ ! -e ~/.nosleep ] && touch ~/.nosleep || rm ~/.nosleep) && killall -USR1 i3status
+
+#
+# Notifications
+#
+
+bindsym $mod+Shift+n mode notifications
+mode notifications {
+ bindsym Return exec makoctl invoke; exec makoctl dismiss; mode default
+ bindsym d exec makoctl dismiss; mode default
+ bindsym Shift+d exec makoctl dismiss -a; mode default
+
+ bindsym Escape mode default
+ bindsym q mode default
+}
+
+#
+# Screenshotting
+#
+
+bindsym $mod+Shift+s mode screenshot
+mode screenshot {
+ bindsym a exec grim $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
+ bindsym r exec slurp | grim -g - $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
+
+ bindsym Escape mode default
+ bindsym q mode default
+}
+
+#
+# Window configurations
+#
+for_window [class="mpv"] floating enable
+for_window [class="TelegramDesktop"] floating enable
+for_window [app_id="pavucontrol"] floating enable
+for_window [app_id="meld"] floating enable
+for_window [app_id="nm-connection-editor"] floating enable
+
+set $blue #285577
+set $gray #1e1f21
+set $red #900000
+
+#
+# Status Bar:
+#
+# Read `man 5 sway-bar` for more information about this section.
+bar {
+ position bottom
+ colors {
+ background $gray
+ inactive_workspace $gray $gray #888888
+ active_workspace $gray $gray #ffffff
+ urgent_workspace $red $red #ffffff
+ focused_workspace $blue $blue #ffffff
+ }
+ status_command i3status | my-i3status.py
+}
+
+client.focused $blue $blue #ffffff $blue $blue
+client.unfocused $gray $gray #ffffff $gray $gray
+client.focused_inactive $gray $gray #ffffff $gray $gray
+
+# font pango: benis uushi 9
+# font pango: Ubuntu Mono 11
+# font pango: Inconsolata 11
+font pango: DejaVu Sans Mono 9
+# font pango: Liberation Mono 9
+
+# get rid of title bars
+default_border pixel 4
+
+exec xrdb .Xresources
+# exec pgrep -x "systemd-inhibit" || \
+# systemd-inhibit --what=handle-power-key --who=aminb \
+# --why="Handle power button in sway" sleep infinity
+exec mako 2>&1 >/tmp/mako.log
+exec /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
+
+include /etc/sway/config.d/*
+include ~/.config/sway/`hostname`
+
+exec systemd-notify --ready || true
+
+#+end_src
+
+*** langa
+:PROPERTIES:
+:header-args+: :tangle ~/.config/sway/langa
+:END:
+
+#+begin_src conf
+input "2:7:SynPS/2_Synaptics_TouchPad" {
+ events disabled
+ dwt enabled
+ tap enabled
+ natural_scroll enabled
+ click_method clickfinger
+}
+
+input "1:1:AT_Translated_Set_2_keyboard" {
+ repeat_delay 200
+ repeat_rate 45
+ xkb_layout us_ab,ir
+ xkb_options ctrl:nocaps,altwin:swap_alt_win,grp:shifts_toggle
+}
+
+input "65261:24672:technomancy_Atreus" {
+ repeat_delay 200
+ repeat_rate 45
+}
+#+end_src
+
+*** shemshak
+:PROPERTIES:
+:header-args+: :tangle ~/.config/sway/shemshak
+:END:
+
+#+begin_src conf
+input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
+ dwt enabled
+ tap enabled
+ natural_scroll enabled
+ middle_emulation enabled
+ click_method clickfinger
+}
+
+input "1:1:AT_Translated_Set_2_keyboard" {
+ repeat_delay 200
+ repeat_rate 45
+ xkb_layout us,ir
+ xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
+}
+#+end_src
+** swaylock
+:PROPERTIES:
+:header-args+: :tangle ~/.config/swaylock/config
+:END:
+
+#+begin_src conf
+image=/home/amin/usr/pics/wp/wp2445784-blurred-wallpapers.jpg
+scaling=fill
+#+end_src
+** systemd
+
+Keep boot messages on tty1 (see [[https://wiki.archlinux.org/index.php/getty#Have_boot_messages_stay_on_tty1][here]])
+
+#+begin_src conf :tangle /sudo::/etc/systemd/system/getty@tty1.service.d/noclear.conf
+[Service]
+TTYVTDisallocate=no
+#+end_src
+
+** TLP
+
+*** langa
+
+#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "langa")) "/sudo::/etc/default/tlp")
+# ------------------------------------------------------------------------------
+# tlp - Parameters for power saving
+# See full explanation: https://linrunner.de/en/tlp/docs/tlp-configuration.html
+
+# Notes:
+# - Some parameters are disabled, remove the leading '#' to enable # them;
+# shown values are suggestions not defaults
+# - Default *: intrinsic default that is effective when the parameter is missing
+# or disabled by a leading '#'; use PARAM="" to disable intrinsic defaults for
+# parameters with text string values
+# - Default <none>: do nothing or use kernel/hardware defaults
+
+# Set to 0 to disable, 1 to enable TLP.
+# Default: 0
+TLP_ENABLE=1
+
+# Operation mode when no power supply can be detected: AC, BAT.
+# Concerns some desktop and embedded hardware only.
+# Default: <none>
+TLP_DEFAULT_MODE=AC
+
+# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
+# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
+# Default: 0
+TLP_PERSISTENT_DEFAULT=0
+
+# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
+# Non-zero value enables, zero disables laptop mode.
+# Default: 0 (AC), 2 (BAT)
+DISK_IDLE_SECS_ON_AC=0
+DISK_IDLE_SECS_ON_BAT=2
+
+# Dirty page values (timeouts in secs).
+# Default: 15 (AC + BAT)
+MAX_LOST_WORK_SECS_ON_AC=15
+MAX_LOST_WORK_SECS_ON_BAT=60
+
+# Note: CPU parameters below are disabled by default, remove the leading #
+# to enable them, otherwise kernel defaults will be used.
+
+# Select a CPU frequency scaling governor.
+# Intel Core i processor with intel_pstate driver:
+# powersave(*), performance.
+# Older hardware with acpi-cpufreq driver:
+# ondemand(*), powersave, performance, conservative, schedutil.
+# (*) is recommended.
+# Use tlp-stat -p to show the active driver and available governors.
+# Important:
+# powersave for intel_pstate and ondemand for acpi-cpufreq are power
+# efficient for *almost all* workloads and therefore kernel and most
+# distributions have chosen them as defaults. If you still want to change,
+# you should know what you're doing! You *must* disable your distribution's
+# governor settings or conflicts will occur.
+# Default: <none>
+#CPU_SCALING_GOVERNOR_ON_AC=powersave
+#CPU_SCALING_GOVERNOR_ON_BAT=powersave
+
+# Set the min/max frequency available for the scaling governor.
+# Possible values depend on your CPU. For available frequencies see
+# the output of tlp-stat -p.
+# Default: <none>
+#CPU_SCALING_MIN_FREQ_ON_AC=0
+#CPU_SCALING_MAX_FREQ_ON_AC=0
+#CPU_SCALING_MIN_FREQ_ON_BAT=0
+#CPU_SCALING_MAX_FREQ_ON_BAT=0
+
+# Set energy performance hints (HWP) for Intel P-state governor:
+# performance, balance_performance, default, balance_power, power
+# Values are given in order of increasing power saving.
+# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
+# Default: <none>
+CPU_HWP_ON_AC=balance_performance
+CPU_HWP_ON_BAT=balance_power
+
+# Set Intel P-state performance: 0..100 (%).
+# Limit the max/min P-state to control the power dissipation of the CPU.
+# Values are stated as a percentage of the available performance.
+# Requires an Intel Core i processor with intel_pstate driver.
+# Default: <none>
+#CPU_MIN_PERF_ON_AC=0
+#CPU_MAX_PERF_ON_AC=100
+#CPU_MIN_PERF_ON_BAT=0
+#CPU_MAX_PERF_ON_BAT=30
+
+# Set the CPU "turbo boost" feature: 0=disable, 1=allow
+# Requires an Intel Core i processor.
+# Important:
+# - This may conflict with your distribution's governor settings
+# - A value of 1 does *not* activate boosting, it just allows it
+# Default: <none>
+#CPU_BOOST_ON_AC=1
+#CPU_BOOST_ON_BAT=0
+
+# Minimize number of used CPU cores/hyper-threads under light load conditions:
+# 0=disable, 1=enable.
+# Default: <none>
+SCHED_POWERSAVE_ON_AC=0
+SCHED_POWERSAVE_ON_BAT=1
+
+# Kernel NMI Watchdog:
+# 0=disable (default, saves power), 1=enable (for kernel debugging only).
+# Default: <none>
+NMI_WATCHDOG=0
+
+# Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
+# Frequency voltage pairs are written to:
+# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
+# CAUTION: only use this, if you thoroughly understand what you are doing!
+# Default: <none>.
+#PHC_CONTROLS="F:V F:V F:V F:V"
+
+# Set CPU performance versus energy savings policy:
+# performance, balance-performance, default, balance-power, power.
+# Values are given in order of increasing power saving.
+# Requires kernel module msr and x86_energy_perf_policy from linux-tools.
+# Default: <none>
+ENERGY_PERF_POLICY_ON_AC=performance
+ENERGY_PERF_POLICY_ON_BAT=balance-power
+
+# Disk devices; separate multiple devices with spaces.
+# Devices can be specified by disk ID also (lookup with: tlp diskid).
+# Note: DISK parameters below are effective only when this option is configured.
+# Default: "nvme0n1 sda"
+DISK_DEVICES="sda sdb"
+
+# Disk advanced power management level: 1..254, 255 (max saving, min, off).
+# Levels 1..127 may spin down the disk; 255 allowable on most drives.
+# Separate values for multiple disks with spaces. Use the special value 'keep'
+# to keep the hardware default for the particular disk.
+# Default: <none>
+DISK_APM_LEVEL_ON_AC="254 254"
+DISK_APM_LEVEL_ON_BAT="128 128"
+
+# Hard disk spin down timeout:
+# 0: spin down disabled
+# 1..240: timeouts from 5s to 20min (in units of 5s)
+# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
+# See 'man hdparm' for details.
+# Separate values for multiple disks with spaces. Use the special value 'keep'
+# to keep the hardware default for the particular disk.
+# Default: <none>
+#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
+#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
+
+# Select I/O scheduler for the disk devices.
+# Multi queue (blk-mq) schedulers:
+# mq-deadline(*), none, kyber, bfq
+# Single queue schedulers:
+# deadline(*), cfq, bfq, noop
+# (*) recommended.
+# Separate values for multiple disks with spaces. Use the special value 'keep'
+# to keep the kernel default scheduler for the particular disk.
+# Notes:
+# - Multi queue (blk-mq) may need kernel boot option 'scsi_mod.use_blk_mq=1'
+# and 'modprobe mq-deadline-iosched|kyber|bfq' on kernels < 5.0
+# - Single queue schedulers are legacy now and were removed together with
+# the old block layer in kernel 5.0
+# Default: keep
+#DISK_IOSCHED="mq-deadline mq-deadline"
+
+# AHCI link power management (ALPM) for disk devices:
+# min_power, med_power_with_dipm(*), medium_power, max_performance.
+# (*) Kernel >= 4.15 required, then recommended.
+# Multiple values separated with spaces are tried sequentially until success.
+# Default: <none>
+SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
+SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
+
+# Exclude host devices from AHCI link power management.
+# Separate multiple hosts with spaces.
+# Default: <none>
+#SATA_LINKPWR_BLACKLIST="host1"
+
+# Runtime Power Management for AHCI host and disks devices:
+# on=disable, auto=enable.
+# EXPERIMENTAL ** WARNING: auto may cause system lockups/data loss.
+# Default: <none>
+#AHCI_RUNTIME_PM_ON_AC=on
+#AHCI_RUNTIME_PM_ON_BAT=on
+
+# Seconds of inactivity before disk is suspended.
+# Note: effective only when AHCI_RUNTIME_PM_ON_AC/BAT is activated.
+# Default: 15
+AHCI_RUNTIME_PM_TIMEOUT=15
+
+# PCI Express Active State Power Management (PCIe ASPM):
+# default(*), performance, powersave.
+# (*) keeps BIOS ASPM defaults (recommended)
+# Default: <none>
+#PCIE_ASPM_ON_AC=default
+#PCIE_ASPM_ON_BAT=default
+
+# Set the min/max/turbo frequency for the Intel GPU.
+# Possible values depend on your hardware. For available frequencies see
+# the output of tlp-stat -g.
+# Default: <none>
+#INTEL_GPU_MIN_FREQ_ON_AC=0
+#INTEL_GPU_MIN_FREQ_ON_BAT=0
+#INTEL_GPU_MAX_FREQ_ON_AC=0
+#INTEL_GPU_MAX_FREQ_ON_BAT=0
+#INTEL_GPU_BOOST_FREQ_ON_AC=0
+#INTEL_GPU_BOOST_FREQ_ON_BAT=0
+
+# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
+# auto = mid on BAT, high on AC.
+# Default: default
+RADEON_POWER_PROFILE_ON_AC=default
+RADEON_POWER_PROFILE_ON_BAT=default
+
+# Radeon dynamic power management method (DPM): battery, performance.
+# Default: <none>
+RADEON_DPM_STATE_ON_AC=performance
+RADEON_DPM_STATE_ON_BAT=battery
+
+# Radeon DPM performance level: auto, low, high; auto is recommended.
+# Note: effective only when RADEON_DPM_STATE_ON_AC/BAT is activated.
+# Default: auto
+RADEON_DPM_PERF_LEVEL_ON_AC=auto
+RADEON_DPM_PERF_LEVEL_ON_BAT=auto
+
+# WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
+# Default: <none>
+WIFI_PWR_ON_AC=off
+WIFI_PWR_ON_BAT=on
+
+# Disable wake on LAN: Y/N.
+# Default: N
+WOL_DISABLE=Y
+
+# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
+# A value of 0 disables, >=1 enables power saving (recommended: 1).
+# Default: <none>
+SOUND_POWER_SAVE_ON_AC=0
+SOUND_POWER_SAVE_ON_BAT=0
+
+# Disable controller too (HDA only): Y/N.
+# Note: effective only when SOUND_POWER_SAVE_ON_AC/BAT is activated.
+# Default: Y
+SOUND_POWER_SAVE_CONTROLLER=N
+
+# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
+# Drive can be powered on again by releasing (and reinserting) the eject lever
+# or by pressing the disc eject button on newer models.
+# Note: an UltraBay/MediaBay hard disk is never powered off.
+# Default: 0
+BAY_POWEROFF_ON_AC=0
+BAY_POWEROFF_ON_BAT=0
+# Optical drive device to power off
+# Default: sr0
+BAY_DEVICE="sr0"
+
+# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
+# Default: <none>
+RUNTIME_PM_ON_AC=on
+RUNTIME_PM_ON_BAT=auto
+
+# Exclude PCI(e) device adresses the following list from Runtime PM
+# (separate with spaces). Use lspci to get the adresses (1st column).
+# Default: <none>
+#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
+
+# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
+# Default when unconfigured is "amdgpu nouveau nvidia radeon" which
+# prevents accidential power-on of dGPU in hybrid graphics setups.
+# Separate multiple drivers with spaces.
+# Default: "amdgpu mei_me nouveau nvidia pcieport radeon", use "" to disable
+# completely.
+#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu mei_me nouveau nvidia pcieport radeon"
+
+# Set to 0 to disable, 1 to enable USB autosuspend feature.
+# Default: 0
+USB_AUTOSUSPEND=1
+
+# Exclude listed devices from USB autosuspend (separate with spaces).
+# Use lsusb to get the ids.
+# Note: input devices (usbhid) are excluded automatically
+# Default: <none>
+#USB_BLACKLIST="1111:2222 3333:4444"
+
+# Bluetooth devices are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude.
+# Default: 0
+USB_BLACKLIST_BTUSB=0
+
+# Phone devices are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude (enable charging).
+# Default: 0
+USB_BLACKLIST_PHONE=0
+
+# Printers are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude.
+# Default: 1
+USB_BLACKLIST_PRINTER=1
+
+# WWAN devices are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude.
+# Default: 0
+USB_BLACKLIST_WWAN=0
+
+# Include listed devices into USB autosuspend even if already excluded
+# by the blacklists above (separate with spaces). Use lsusb to get the ids.
+# Default: <none>
+#USB_WHITELIST="1111:2222 3333:4444"
+
+# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
+# (workaround for USB devices that cause shutdown problems).
+# Default: 0
+#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
+
+# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
+# on system startup: 0=disable, 1=enable.
+# Note: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
+# are ignored when this is enabled.
+# Default: 0
+#RESTORE_DEVICE_STATE_ON_STARTUP=0
+RESTORE_DEVICE_STATE_ON_STARTUP=1
+
+# Radio devices to disable on startup: bluetooth, wifi, wwan.
+# Separate multiple devices with spaces.
+# Default: <none>
+#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
+
+# Radio devices to enable on startup: bluetooth, wifi, wwan.
+# Separate multiple devices with spaces.
+# Default: <none>
+#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
+
+# Radio devices to disable on shutdown: bluetooth, wifi, wwan.
+# (workaround for devices that are blocking shutdown).
+# Default: <none>
+#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
+
+# Radio devices to enable on shutdown: bluetooth, wifi, wwan.
+# (to prevent other operating systems from missing radios).
+# Default: <none>
+#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
+
+# Radio devices to enable on AC: bluetooth, wifi, wwan.
+# Default: <none>
+#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
+
+# Radio devices to disable on battery: bluetooth, wifi, wwan.
+# Default: <none>
+#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
+DEVICES_TO_DISABLE_ON_BAT="bluetooth"
+
+# Radio devices to disable on battery when not in use (not connected):
+# bluetooth, wifi, wwan.
+# Default: <none>
+#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
+
+# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
+# required). Charging starts when the remaining capacity falls below the
+# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
+# Main / Internal battery (values in %)
+# Default: <none>
+#START_CHARGE_THRESH_BAT0=75
+#STOP_CHARGE_THRESH_BAT0=80
+# Ultrabay / Slice / Replaceable battery (values in %)
+# Default: <none>
+#START_CHARGE_THRESH_BAT1=75
+#STOP_CHARGE_THRESH_BAT1=80
+
+# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
+# Default: 0
+#RESTORE_THRESHOLDS_ON_BAT=1
+
+# Battery feature drivers: 0=disable, 1=enable
+# Default: 1 (all)
+NATACPI_ENABLE=1
+TPACPI_ENABLE=1
+TPSMAPI_ENABLE=1
+
+# ------------------------------------------------------------------------------
+# tlp-rdw - Parameters for the radio device wizard
+# Possible devices: bluetooth, wifi, wwan.
+
+# Notes:
+# - Parameters are disabled by default, remove the leading # to enable them
+# - Separate multiple radio devices with spaces
+
+# Default: <none> (for all parameters below)
+
+# Radio devices to disable on connect.
+#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
+#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
+#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
+
+# Radio devices to enable on disconnect.
+#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
+#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
+#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
+
+# Radio devices to enable/disable when docked.
+#DEVICES_TO_ENABLE_ON_DOCK=""
+#DEVICES_TO_DISABLE_ON_DOCK=""
+
+# Radio devices to enable/disable when undocked.
+#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
+#DEVICES_TO_DISABLE_ON_UNDOCK=""
+#+end_src
+
+*** shemshak
+
+#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "shemshak")) "/sudo::/etc/default/tlp")
+# ------------------------------------------------------------------------------
+# tlp - Parameters for power saving
+# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
+
+# Hint: some features are disabled by default, remove the leading # to enable
+# them.
+
+# Set to 0 to disable, 1 to enable TLP.
+TLP_ENABLE=1
+
+# Operation mode when no power supply can be detected: AC, BAT.
+# Concerns some desktop and embedded hardware only.
+TLP_DEFAULT_MODE=AC
+
+# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
+# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
+TLP_PERSISTENT_DEFAULT=0
+
+# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
+# Non-zero value enables, zero disables laptop mode.
+DISK_IDLE_SECS_ON_AC=0
+DISK_IDLE_SECS_ON_BAT=2
+
+# Dirty page values (timeouts in secs).
+MAX_LOST_WORK_SECS_ON_AC=15
+MAX_LOST_WORK_SECS_ON_BAT=60
+
+# Hint: CPU parameters below are disabled by default, remove the leading #
+# to enable them, otherwise kernel default values are used.
+
+# Select a CPU frequency scaling governor.
+# Intel Core i processor with intel_pstate driver:
+# powersave(*), performance.
+# Older hardware with acpi-cpufreq driver:
+# ondemand(*), powersave, performance, conservative, schedutil.
+# (*) is recommended.
+# Hint: use tlp-stat -p to show the active driver and available governors.
+# Important:
+# powersave for intel_pstate and ondemand for acpi-cpufreq are power
+# efficient for *almost all* workloads and therefore kernel and most
+# distributions have chosen them as defaults. If you still want to change,
+# you should know what you're doing! You *must* disable your distribution's
+# governor settings or conflicts will occur.
+#CPU_SCALING_GOVERNOR_ON_AC=powersave
+#CPU_SCALING_GOVERNOR_ON_BAT=powersave
+
+# Set the min/max frequency available for the scaling governor.
+# Possible values strongly depend on your CPU. For available frequencies see
+# the output of tlp-stat -p.
+#CPU_SCALING_MIN_FREQ_ON_AC=0
+#CPU_SCALING_MAX_FREQ_ON_AC=0
+#CPU_SCALING_MIN_FREQ_ON_BAT=0
+#CPU_SCALING_MAX_FREQ_ON_BAT=0
+
+# Set energy performance hints (HWP) for Intel P-state governor:
+# performance, balance_performance, default, balance_power, power
+# Values are given in order of increasing power saving.
+# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
+CPU_HWP_ON_AC=balance_performance
+CPU_HWP_ON_BAT=balance_power
+
+# Set Intel P-state performance: 0..100 (%).
+# Limit the max/min P-state to control the power dissipation of the CPU.
+# Values are stated as a percentage of the available performance.
+# Requires an Intel Core i processor with intel_pstate driver.
+#CPU_MIN_PERF_ON_AC=0
+#CPU_MAX_PERF_ON_AC=100
+#CPU_MIN_PERF_ON_BAT=0
+#CPU_MAX_PERF_ON_BAT=30
+
+# Set the CPU "turbo boost" feature: 0=disable, 1=allow
+# Requires an Intel Core i processor.
+# Important:
+# - This may conflict with your distribution's governor settings
+# - A value of 1 does *not* activate boosting, it just allows it
+#CPU_BOOST_ON_AC=1
+#CPU_BOOST_ON_BAT=0
+
+# Minimize number of used CPU cores/hyper-threads under light load conditions:
+# 0=disable, 1=enable.
+SCHED_POWERSAVE_ON_AC=0
+SCHED_POWERSAVE_ON_BAT=1
+
+# Kernel NMI Watchdog:
+# 0=disable (default, saves power), 1=enable (for kernel debugging only).
+NMI_WATCHDOG=0
+
+# Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
+# Frequency voltage pairs are written to:
+# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
+# CAUTION: only use this, if you thoroughly understand what you are doing!
+#PHC_CONTROLS="F:V F:V F:V F:V"
+
+# Set CPU performance versus energy savings policy:
+# performance, balance-performance, default, balance-power, power.
+# Values are given in order of increasing power saving.
+# Requires kernel module msr and x86_energy_perf_policy from linux-tools.
+ENERGY_PERF_POLICY_ON_AC=performance
+ENERGY_PERF_POLICY_ON_BAT=balance-power
+
+# Disk devices; separate multiple devices with spaces (default: sda).
+# Devices can be specified by disk ID also (lookup with: tlp diskid).
+DISK_DEVICES="sda sdb"
+
+# Disk advanced power management level: 1..254, 255 (max saving, min, off).
+# Levels 1..127 may spin down the disk; 255 allowable on most drives.
+# Separate values for multiple disks with spaces. Use the special value 'keep'
+# to keep the hardware default for the particular disk.
+DISK_APM_LEVEL_ON_AC="254 254"
+DISK_APM_LEVEL_ON_BAT="128 128"
+
+# Hard disk spin down timeout:
+# 0: spin down disabled
+# 1..240: timeouts from 5s to 20min (in units of 5s)
+# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
+# See 'man hdparm' for details.
+# Separate values for multiple disks with spaces. Use the special value 'keep'
+# to keep the hardware default for the particular disk.
+#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
+#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
+
+# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
+# Separate values for multiple disks with spaces. Use the special value 'keep'
+# to keep the kernel default scheduler for the particular disk.
+#DISK_IOSCHED="cfq cfq"
+
+# AHCI link power management (ALPM) for disk devices:
+# min_power, med_power_with_dipm(*), medium_power, max_performance.
+# (*) Kernel >= 4.15 required, then recommended.
+# Multiple values separated with spaces are tried sequentially until success.
+SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
+SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
+
+# Exclude host devices from AHCI link power management.
+# Separate multiple hosts with spaces.
+#SATA_LINKPWR_BLACKLIST="host1"
+
+# Runtime Power Management for AHCI host and disks devices:
+# on=disable, auto=enable.
+# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
+#AHCI_RUNTIME_PM_ON_AC=on
+#AHCI_RUNTIME_PM_ON_BAT=on
+
+# Seconds of inactivity before disk is suspended.
+AHCI_RUNTIME_PM_TIMEOUT=15
+
+# PCI Express Active State Power Management (PCIe ASPM):
+# default, performance, powersave.
+PCIE_ASPM_ON_AC=performance
+PCIE_ASPM_ON_BAT=powersave
+
+# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
+# auto = mid on BAT, high on AC; default = use hardware defaults.
+RADEON_POWER_PROFILE_ON_AC=high
+RADEON_POWER_PROFILE_ON_BAT=low
+
+# Radeon dynamic power management method (DPM): battery, performance.
+RADEON_DPM_STATE_ON_AC=performance
+RADEON_DPM_STATE_ON_BAT=battery
+
+# Radeon DPM performance level: auto, low, high; auto is recommended.
+RADEON_DPM_PERF_LEVEL_ON_AC=auto
+RADEON_DPM_PERF_LEVEL_ON_BAT=auto
+
+# WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
+WIFI_PWR_ON_AC=off
+WIFI_PWR_ON_BAT=on
+
+# Disable wake on LAN: Y/N.
+WOL_DISABLE=Y
+
+# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
+# A value of 0 disables, >=1 enables power saving (recommended: 1).
+SOUND_POWER_SAVE_ON_AC=0
+SOUND_POWER_SAVE_ON_BAT=0
+
+# Disable controller too (HDA only): Y/N.
+SOUND_POWER_SAVE_CONTROLLER=N
+
+# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
+# Drive can be powered on again by releasing (and reinserting) the eject lever
+# or by pressing the disc eject button on newer models.
+# Note: an UltraBay/MediaBay hard disk is never powered off.
+BAY_POWEROFF_ON_AC=0
+BAY_POWEROFF_ON_BAT=0
+# Optical drive device to power off (default sr0).
+BAY_DEVICE="sr0"
+
+# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
+RUNTIME_PM_ON_AC=on
+RUNTIME_PM_ON_BAT=auto
+
+# Exclude PCI(e) device adresses the following list from Runtime PM
+# (separate with spaces). Use lspci to get the adresses (1st column).
+#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
+RUNTIME_PM_BLACKLIST="01:00.0"
+
+# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
+# Default when unconfigured is "amdgpu nouveau nvidia radeon" which
+# prevents accidential power-on of dGPU in hybrid graphics setups.
+# Use "" to disable the feature completely.
+# Separate multiple drivers with spaces.
+#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
+
+# Set to 0 to disable, 1 to enable USB autosuspend feature.
+USB_AUTOSUSPEND=1
+
+# Exclude listed devices from USB autosuspend (separate with spaces).
+# Use lsusb to get the ids.
+# Note: input devices (usbhid) are excluded automatically
+#USB_BLACKLIST="1111:2222 3333:4444"
+
+# Bluetooth devices are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude.
+USB_BLACKLIST_BTUSB=0
+
+# Phone devices are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude (enable charging).
+USB_BLACKLIST_PHONE=0
+
+# Printers are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude.
+USB_BLACKLIST_PRINTER=1
+
+# WWAN devices are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude.
+USB_BLACKLIST_WWAN=1
+
+# Include listed devices into USB autosuspend even if already excluded
+# by the blacklists above (separate with spaces).
+# Use lsusb to get the ids.
+#USB_WHITELIST="1111:2222 3333:4444"
+
+# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
+# (workaround for USB devices that cause shutdown problems).
+#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
+
+# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
+# on system startup: 0=disable, 1=enable.
+# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
+# are ignored when this is enabled!
+#RESTORE_DEVICE_STATE_ON_STARTUP=0
+RESTORE_DEVICE_STATE_ON_STARTUP=1
+
+# Radio devices to disable on startup: bluetooth, wifi, wwan.
+# Separate multiple devices with spaces.
+#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
+
+# Radio devices to enable on startup: bluetooth, wifi, wwan.
+# Separate multiple devices with spaces.
+#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
+
+# Radio devices to disable on shutdown: bluetooth, wifi, wwan.
+# (workaround for devices that are blocking shutdown).
+#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
+
+# Radio devices to enable on shutdown: bluetooth, wifi, wwan.
+# (to prevent other operating systems from missing radios).
+#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
+
+# Radio devices to enable on AC: bluetooth, wifi, wwan.
+#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
+
+# Radio devices to disable on battery: bluetooth, wifi, wwan.
+#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
+
+# Radio devices to disable on battery when not in use (not connected):
+# bluetooth, wifi, wwan.
+#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
+
+# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
+# required). Charging starts when the remaining capacity falls below the
+# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
+# Main / Internal battery (values in %)
+#START_CHARGE_THRESH_BAT0=75
+#STOP_CHARGE_THRESH_BAT0=80
+# Ultrabay / Slice / Replaceable battery (values in %)
+#START_CHARGE_THRESH_BAT1=75
+#STOP_CHARGE_THRESH_BAT1=80
+
+# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
+#RESTORE_THRESHOLDS_ON_BAT=1
+
+# ------------------------------------------------------------------------------
+# tlp-rdw - Parameters for the radio device wizard
+# Possible devices: bluetooth, wifi, wwan.
+
+# Hints:
+# - Parameters are disabled by default, remove the leading # to enable them
+# - Separate multiple radio devices with spaces
+
+# Radio devices to disable on connect.
+#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
+#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
+#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
+
+# Radio devices to enable on disconnect.
+#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
+#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
+#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
+
+# Radio devices to enable/disable when docked.
+#DEVICES_TO_ENABLE_ON_DOCK=""
+#DEVICES_TO_DISABLE_ON_DOCK=""
+
+# Radio devices to enable/disable when undocked.
+#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
+#DEVICES_TO_DISABLE_ON_UNDOCK=""
+#+end_src
+
+** X
+
+*** xprofile
+:PROPERTIES:
+:header-args+: :tangle ~/.xprofile
+:END:
+
+=~/.xprofile= is similar in style to =~/.xinitrc=, but on the
+contrary, it's automatically sourced by LightDM, my display manager of
+choice.
+
+#+begin_src sh :tangle no
+xset -b # disable bell
+xset r rate 200 45 # repeat delay (ms) and rate (repeats/sec)
+
+# setxkbmap -option compose:ralt
+
+setxkbmap -option ctrl:nocaps # turn capslock into control
+setxkbmap -option altwin:swap_alt_win # swap alt and super
+
+if [ $(hostname) = "plasma" ]
+then
+ setxkbmap -option ctrl:rctrl_ralt # turn right control into right alt
+fi
+
+if [ $(hostname) = "enigma" ]
+then
+ xmodmap -e "keycode 135 = Alt_R" # remap menu key to alt
+fi
+
+light -Scrs "intel_backlight" 2
+
+source $HOME/.zprofile
+
+export _JAVA_AWT_WM_NONREPARENTING=1
+export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
+
+if [ $(hostname) = "plasma" ]
+then
+ unlock-def-gk.py &
+fi
+
+bspwm &
+#+end_src
+
+*** X resources
+
+**** Xresources
+:PROPERTIES:
+:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
+:END:
+
+#+begin_src conf-xdefaults
+#include ".Xresources.d/fonts"
+! #include ".Xresources.d/colors"
+#include ".Xresources.d/emacs"
+#include ".Xresources.d/rxvt-unicode"
+#+end_src
+
+**** Xresources.d
+
+***** fonts
+:PROPERTIES:
+:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
+:END:
+
+#+begin_src conf-xdefaults
+Xft.lcdfilter: lcddefault
+Xft.antialias: true
+Xft.autohint: 0
+Xft.hinting: true
+Xft.hintstyle: hintslight
+! Xft.hintstyle: hintfull
+Xft.rgba: rgb
+Xft.dpi: 96
+#+end_src
+
+***** colors
+:PROPERTIES:
+:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
+:END:
+
+#+begin_src conf-xdefaults :tangle no
+#include "gruvbox-light.xresources"
+! #include "gruvbox-dark.xresources"
+#include "gruvbox-urxvt256.xresources"
+#+end_src
+
+#+begin_src conf-xdefaults :tangle no
+! -----------------------------------------------------------------------------
+! File: gruvbox-light.xresources
+! Description: Retro groove colorscheme generalized
+! Author: morhetz <morhetz@gmail.com>
+! Source: https://github.com/morhetz/gruvbox-generalized
+! Last Modified: 6 Sep 2014
+! -----------------------------------------------------------------------------
+
+! hard contrast: *background: #f9f5d7
+*background: #fbf1c7
+! soft contrast: *background: #f2e5bc
+*foreground: #3c3836
+! Black + DarkGrey
+*color0: #fdf4c1
+*color8: #928374
+! DarkRed + Red
+*color1: #cc241d
+*color9: #9d0006
+! DarkGreen + Green
+*color2: #98971a
+*color10: #79740e
+! DarkYellow + Yellow
+*color3: #d79921
+*color11: #b57614
+! DarkBlue + Blue
+*color4: #458588
+*color12: #076678
+! DarkMagenta + Magenta
+*color5: #b16286
+*color13: #8f3f71
+! DarkCyan + Cyan
+*color6: #689d6a
+*color14: #427b58
+! LightGrey + White
+*color7: #7c6f64
+*color15: #3c3836
+#+end_src
+
+#+begin_src conf-xdefaults :tangle no
+! -----------------------------------------------------------------------------
+! File: gruvbox-dark.xresources
+! Description: Retro groove colorscheme generalized
+! Author: morhetz <morhetz@gmail.com>
+! Source: https://github.com/morhetz/gruvbox-generalized
+! Last Modified: 6 Sep 2014
+! -----------------------------------------------------------------------------
+
+! hard contrast: *background: #1d2021
+*background: #282828
+! soft contrast: *background: #32302f
+*foreground: #ebdbb2
+! Black + DarkGrey
+*color0: #282828
+*color8: #928374
+! DarkRed + Red
+*color1: #cc241d
+*color9: #fb4934
+! DarkGreen + Green
+*color2: #98971a
+*color10: #b8bb26
+! DarkYellow + Yellow
+*color3: #d79921
+*color11: #fabd2f
+! DarkBlue + Blue
+*color4: #458588
+*color12: #83a598
+! DarkMagenta + Magenta
+*color5: #b16286
+*color13: #d3869b
+! DarkCyan + Cyan
+*color6: #689d6a
+*color14: #8ec07c
+! LightGrey + White
+*color7: #a89984
+*color15: #ebdbb2
+#+end_src
+
+#+begin_src conf-xdefaults :tangle no
+! -----------------------------------------------------------------------------
+! File: gruvbox-urxvt256.xresources
+! Description: Retro groove colorscheme generalized
+! Author: morhetz <morhetz@gmail.com>
+! Source: https://github.com/morhetz/gruvbox-generalized
+! Last Modified: 13 Dec 2013
+! -----------------------------------------------------------------------------
+
+URxvt.color24: #076678
+URxvt.color66: #427b58
+URxvt.color88: #9d0006
+URxvt.color96: #8f3f71
+URxvt.color100: #79740e
+URxvt.color108: #8ec07c
+URxvt.color109: #83a598
+URxvt.color130: #af3a03
+URxvt.color136: #b57614
+URxvt.color142: #b8bb26
+URxvt.color167: #fb4934
+URxvt.color175: #d3869b
+URxvt.color208: #fe8019
+URxvt.color214: #fabd2f
+URxvt.color223: #ebdbb2
+URxvt.color228: #f2e5bc
+URxvt.color229: #fbf1c7
+URxvt.color230: #f9f5d7
+URxvt.color234: #1d2021
+URxvt.color235: #282828
+URxvt.color236: #32302f
+URxvt.color237: #3c3836
+URxvt.color239: #504945
+URxvt.color241: #665c54
+URxvt.color243: #7c6f64
+URxvt.color244: #928374
+URxvt.color245: #928374
+URxvt.color246: #a89984
+URxvt.color248: #bdae93
+URxvt.color250: #d5c4a1
+#+end_src
+
+***** emacs
+:PROPERTIES:
+:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
+:END:
+
+#+begin_src conf-xdefaults
+Emacs.menuBar: off
+Emacs.toolBar: off
+Emacs.verticalScrollBars: off
+Emacs.cursorBlink: off
+Emacs.FontBackend: xft,x
+! Emacs.font: Ubuntu Mono-12
+! Emacs.font: Triplicate T4C-11
+! Emacs.font: Ubuntu Mono-10.5
+! Emacs.font: Ubuntu Mono-12
+! Emacs.font: Iosevka-11
+
+! Emacs.font: Fira Mono:size=15
+! Emacs.font: DejaVu Sans Mono:size=15
+! Emacs.font: Inconsolata:size=17
+! Emacs.font: Inconsolata:size=16
+! Emacs.font: Inconsolata LGC:size=14
+! Emacs.font: Source Code Pro Medium-10.5
+Emacs.font: Source Code Pro:size=14
+! Emacs.font: Ubuntu Mono:size=16
+! Emacs.font: Iosevka:size=16
+#+end_src
+
+***** rxvt-unicode
+:PROPERTIES:
+:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
+:END:
+
+#+begin_src conf-xdefaults
+! Font
+URxvt.font: xft:source code pro:pixelsize=14:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
+URxvt.boldFont: xft:source code pro:semibold:pixelsize=14:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
+URxvt.italicFont: xft:source code pro:italic:pixelsize=14:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
+URxvt.bolditalicFont: xft:source code pro:semibold:italic:pixelsize=14:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
+
+URxvt.xftAntialias: true
+URxvt.letterSpace: 0
+
+URxvt.depth: 0
+URxvt.loginShell: true
+URxvt.saveLines: 100000
+URxvt.internalBorder: 3
+URxvt.lineSpace: 0
+URxvt.scrollBar: false
+URxvt.scrollStyle: rxvt
+URxvt*scrollTtyOutput: false
+URxvt*scrollWithBuffer: true
+URxvt*scrollTtyKeypress: true
+URxvt.keysym.Shift-Up: command:\033]720;1\007
+URxvt.keysym.Shift-Down: command:\033]721;1\007
+
+URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select
+URxvt.url-select.launcher: firefox
+URxvt.url-select.underline: true
+URxvt.keysym.M-u: perl:url-select:select_next
+URxvt.keysym.M-Escape: perl:keyboard-select:activate
+URxvt.keysym.M-s: perl:keyboard-select:search
+URxvt.url-launcher: /usr/bin/firefox
+URxvt.matcher.button: 1
+URxvt.iso14755: false
+URxvt.iso14755_53: false
+URxvt.keysym.M-c: perl:clipboard:copy
+URxvt.keysym.M-v: perl:clipboard:paste
+URxvt.keysym.C-A-V: perl:clipboard:paste_escaped
+URxvt.keysym.C-Up: font-size:increase
+URxvt.keysym.C-Down: font-size:decrease
+URxvt.keysym.C-S-Up: font-size:incglobal
+URxvt.keysym.C-S-Down: font-size:decglobal
+URxvt.keysym.C-equal: font-size:reset
+!URxvt.keysym.C-question: font-size:show
+
+URxvt.iconFile: /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
+
+!urxvt*foreground: white
+!urxvt*background: black
+
+!*color0: #2E3436
+!*color1: #a40000
+!*color2: #4E9A06
+!*color3: #C4A000
+!*color4: #3465A4
+!*color5: #75507B
+!*color6: #ce5c00
+!*color7: #babdb9
+!*color8: #555753
+!*color9: #EF2929
+!*color10: #8AE234
+!*color11: #FCE94F
+!*color12: #729FCF
+!*color13: #AD7FA8
+!*color14: #fcaf3e
+!*color15: #EEEEEC
+
+!URxvt.foreground: #C8C8C8
+!URxvt.background: #FFFFFF
+
+!! black
+!*color0: #2E3436
+!*color8: #555753
+!! red
+!*color1: #a40000
+!*color9: #EF2929
+!! green
+!*color2: #4E9A06
+!*color10: #8AE234
+!! yellow
+!*color3: #C4A000
+!*color11: #FCE94F
+!! blue
+!*color4: #3465A4
+!*color12: #729FCF
+!! purple
+!*color5: #75507B
+!*color13: #AD7FA8
+!! orange (replaces cyan)
+!*color6: #ce5c00
+!*color14: #fcaf3e
+!! white
+!*color7: #babdb9
+!*color15: #EEEEEC
+
+! Tango colour theme for rxvt-unicode
+URxvt.background: #FFFFFF
+URxvt.foreground: #000000
+
+! Black
+URxvt.color0: #2E3436
+URxvt.color8: #757773
+
+! Red
+URxvt.color1: #CC0000
+URxvt.color9: #EF2929
+
+! Green
+URxvt.color2: #4E9A06
+URxvt.color10: #8AE234
+
+! Yellow
+URxvt.color3: #C4A000
+URxvt.color11: #FCE94F
+
+! Blue
+URxvt.color4: #3465A4
+URxvt.color12: #729FCF
+
+! Magenta
+URxvt.color5: #75507B
+URxvt.color13: #AD7FA8
+
+!! Cyan
+!URxvt.color6: #06989A
+!URxvt.color14: #34E2E2
+! orange (replaces cyan)
+,*color6: #ce5c00
+,*color14: #fcaf3e
+
+! White
+URxvt.color7: #D3D7CF
+URxvt.color15: #EEEEEC
+#+end_src
+
+*** xkb us_ab keyboard layout
+
+#+begin_src conf :tangle "/sudo::/usr/share/X11/xkb/symbols/us_ab" :comments none
+default partial alphanumeric_keys
+xkb_symbols "us_ab" {
+ include "us(basic)"
+ name[Group1]= "English (US)(aminb)";
+
+ key <MENU> { [ Alt_R ] };
+};
+#+end_src
+
+** XDG
+:PROPERTIES:
+:header-args+: :tangle ~/.config/user-dirs.dirs
+:END:
+
+#+begin_src conf
+XDG_DESKTOP_DIR="$HOME/Desktop"
+XDG_DOCUMENTS_DIR="$HOME/usr/docs"
+XDG_DOWNLOAD_DIR="$HOME/usr/dls"
+XDG_MUSIC_DIR="$HOME/usr/music"
+XDG_PICTURES_DIR="$HOME/usr/pics"
+XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
+XDG_TEMPLATES_DIR="$HOME/usr/Templates"
+XDG_VIDEOS_DIR="$HOME/usr/vids"
+#+end_src
+
+** Zathura
+:PROPERTIES:
+:header-args+: :tangle ~/.config/zathura/zathurarc
+:END:
+
+#+begin_src conf
+set smooth-scroll true
+set selection-clipboard clipboard
+set zoom-step 05
+set default-bg "#272727"
+set statusbar-bg "#272727"
+set inputbar-bg "#373737"
+#+end_src
+
+** Zsh
+
+My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
+[[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
+installed.
+
+*** zimrc
+:PROPERTIES:
+:header-args+: :tangle ~/.zimrc
+:END:
+
+#+begin_src sh
+#################
+# CORE SETTINGS #
+#################
+
+#
+# Zim settings
+#
+
+# Select what modules you would like enabled.
+# The second line of modules may depend on options set by modules in the first
+# line. These dependencies are noted on the respective module's README.md.
+zmodules=(directory environment git git-info history input ssh utility custom \
+ syntax-highlighting history-substring-search prompt completion)
+
+
+###################
+# MODULE SETTINGS #
+###################
+
+#
+# Prompt
+#
+
+# Set your desired prompt here
+zprompt_theme='pure'
+#PURE_PROMPT_SYMBOL=λ
+#PURE_PROMPT_SYMBOL=δ
+PURE_PROMPT_SYMBOL=➜
+
+#
+# Completion
+#
+
+# set an optional host-specific filename for the completion cache file
+# if none is provided, the default '.zcompdump' is used.
+#zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
+
+#
+# Utility
+#
+
+# Uncomment to enable command correction prompts
+# See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
+setopt CORRECT
+
+#
+# Environment
+#
+
+# Set the string below to the desired terminal title format string.
+# The terminal title is redrawn upon directory change, however, variables like
+# ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
+# http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
+# The example below uses the following format: 'username@host:/current/directory'
+ztermtitle='%n@%m:%~'
+
+#
+# Input
+#
+
+# Uncomment to enable double-dot expansion.
+# This appends '../' to your input for each '.' you type after an initial '..'
+#zdouble_dot_expand='true'
+
+#
+# Syntax-Highlighting
+#
+
+# This determines what highlighters will be used with the syntax-highlighting module.
+# Documentation of the highlighters can be found here:
+# https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
+# For (u)rxvt, termite and gnome-terminal users,
+# removing the 'cursor' highlighter will fix the disappearing cursor problem
+#zhighlighters=(main brackets cursor)
+zhighlighters=(main brackets pattern)
+
+#
+# SSH
+#
+
+# Load these ssh identities with the ssh module
+zssh_ids=(id_ed25519_bandali)
+
+#
+# Pacman
+#
+
+# Set (optional) pacman front-end.
+zpacman_frontend='yay'
+
+# Load any helper scripts as defined here
+#zpacman_helper=(aur)
+
+
+#+end_src
+
+*** zlogin
+:PROPERTIES:
+:header-args+: :tangle ~/.zlogin
+:END:
+
+#+begin_src sh
+#
+# User configuration sourced by login shells
+#
+
+# Initialize zim
+[[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
+
+#+end_src
+
+*** zprofile
+:PROPERTIES:
+:header-args+: :tangle ~/.zprofile
+:END:
+
+#+begin_src sh
+#PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
+#PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
+export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
+export XDG_CONFIG_HOME=$HOME/.config
+export XDG_DATA_HOME=$HOME/.local/share
+export XDG_DATA_DIRS=/usr/local/share:/usr/share
+export MAILDIR="$HOME/mail"
+export CVS_RSH=ssh
+#export MATHMODELS=$HOME/src/eiffel/mathmodels
+#export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
+#export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
+
+# Eiffel2Java stuff
+#export JAVA_HOME=/usr/lib/jvm/default
+#export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
+#export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
+#export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
+
+#export PATH="$HOME/usr/build/pvs:$PATH"
+#export SBCLISP_HOME=/usr/share/sbcl-source
+#export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
+
+export MOZ_USE_XINPUT2=1 # precise scrolling in firefox
+
+#export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
+#export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
+
+export NIXPKGS=$HOME/src/git/nixpkgs
+
+if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
+
+export GUIX_LOCPATH="$HOME/.guix-profile/lib/locale"
+export PATH="/$HOME/.config/guix/current/bin${PATH:+:}$PATH"
+export SSL_CERT_DIR="$HOME/.guix-profile/etc/ssl/certs"
+export SSL_CERT_FILE="$HOME/.guix-profile/etc/ssl/certs/ca-certificates.crt"
+export GIT_SSL_CAINFO="$SSL_CERT_FILE"
+#+end_src
+
+*** zshenv
+:PROPERTIES:
+:header-args+: :tangle ~/.zshenv
+:END:
+
+#+begin_src sh
+# Ensure that a non-login, non-interactive shell has a defined environment.
+if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
+ source "${ZDOTDIR:-$HOME}/.zprofile"
+fi
+#+end_src
+
+*** zshrc
+:PROPERTIES:
+:header-args+: :tangle ~/.zshrc
+:END:
+
+#+begin_src sh
+# Bash-like navigation
+#export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
+#export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
+export WORDCHARS='*?[]~=&;!#$%^(){}<>'
+#ZLE_SPACE_SUFFIX_CHARS=$'|&'
+
+#disable -r time # disable shell reserved word
+#alias time='time -p' # -p for POSIX output
+
+# rehash if last command was pacaur or pacman
+# (so that zsh picks up changes in $PATH immediately)
+TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
+
+#
+# User configuration sourced by interactive shells
+#
+
+# Define zim location
+export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
+
+# Start zim
+[[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
+
+ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
+#ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
+
+setopt globdots
+
+source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
+# source ~/.zsh/zsh-autopair/autopair.zsh
+
+
+### fzf ###
+
+source /usr/share/fzf/key-bindings.zsh
+source /usr/share/fzf/completion.zsh
+
+# Accept history selection instead of putting it on
+# the command line
+fzf-history-widget-accept() {
+ fzf-history-widget
+ zle accept-line
+}
+#zle -N fzf-history-widget-accept
+#bindkey '^R' fzf-history-widget-accept
+
+# alt+c preview
+export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
+
+### fzf ###
+
+
+# aliases
+alias mpv="mpv --ytdl-format mp4"
+alias mv="mv -iv"
+alias cp="cp -iv"
+alias scl=systemctl
+alias jcl=journalctl
+alias m="mbsync csclub; mbsync uwaterloo; mbsync amin"
+alias best="youtube-dl -f best"
+alias sd="ssh deb"
+alias sf="ssh fp"
+alias sn="ssh nix"
+
+aur() {
+ cd ~/usr/build
+ git clone https://aur.archlinux.org/${1}.git
+ cd ${1}
+}
+
+# i-beam cursor
+echo -e "\033[5 q"
+#echo -e "\033[6 q"
+
+#+end_src
+
+* Scripts
+
+This section contains various useful scripts and the ones used by the
+programs above. For instance, =toggle-tablet= for switching to and
+from tablet mode on my X220T, =toggle-presentation-mode= for toggling
+Xfce's presentation mode which keeps the screen awake, and
+=rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
+exact brightness value.
+
+** battery-percentage-time
+:PROPERTIES:
+:header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/sh"
+:END:
+
+#+begin_src sh :tangle no
+dbus_send() {
+ label=$1
+ dbus-send --print-reply=literal --system \
+ --dest=org.freedesktop.UPower \
+ /org/freedesktop/UPower/devices/battery_BAT0 \
+ org.freedesktop.DBus.Properties.Get \
+ string:org.freedesktop.UPower.Device \
+ string:"${label}" | awk '{print $3}'
+}
+
+perc=$(dbus_send 'Percentage')
+state=$(dbus_send 'State')
+
+if [ "$state" -eq 2 ]; then # Discharging
+ secs=$(dbus_send 'TimeToEmpty')
+elif [ "$state" -eq 1 ]; then # Charging
+ secs=$(dbus_send 'TimeToFull')
+fi
+
+printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60))
+#+end_src
+
+** my-i3status.py
+:PROPERTIES:
+:header-args+: :tangle ~/.local/bin/my-i3status.py :shebang "#!/usr/bin/env python2"
+:END:
+
+#+begin_src python :comments none
+# -*- coding: utf-8 -*-
+
+# This script is a simple wrapper which prefixes each i3status line with custom
+# information. It is based on:
+# https://github.com/i3/i3status/blob/master/contrib/wrapper.py
+#
+# In ~/.i3status.conf, add the following line:
+# output_format = "i3bar"
+# in the 'general' section.
+# Then, in ~/.config/i3/config or ~/.config/sway/config add:
+# status_command i3status | my-i3status.py
+# in the 'bar' section. Make sure my-i3status.py is in $PATH.
+#
+# © 2012 Valentin Haenel <valentin.haenel@gmx.de>
+# © 2018 Amin Bandali <bandali@gnu.org>
+#
+# This program is free software. It comes without any warranty, to the extent
+# permitted by applicable law. You can redistribute it and/or modify it under
+# the terms of the Do What The Fuck You Want To Public License (WTFPL), Version
+# 2, as published by Sam Hocevar. See http://sam.zoy.org/wtfpl/COPYING for more
+# details.
+
+import sys
+import json
+import os
+
+def get_nosleep():
+ """ Return true if ~/.nosleep exists. """
+ return os.path.isfile(os.path.expanduser("~/.nosleep"))
+
+def print_line(message):
+ """ Non-buffered printing to stdout. """
+ sys.stdout.write(message + '\n')
+ sys.stdout.flush()
+
+def read_line():
+ """ Interrupted respecting reader for stdin. """
+ # try reading a line, removing any extra whitespace
+ try:
+ line = sys.stdin.readline().strip()
+ # i3status sends EOF, or an empty line
+ if not line:
+ sys.exit(3)
+ return line
+ # exit on ctrl-c
+ except KeyboardInterrupt:
+ sys.exit()
+
+if __name__ == '__main__':
+ # Skip the first line which contains the version header.
+ print_line(read_line())
+
+ # The second line contains the start of the infinite array.
+ print_line(read_line())
+
+ while True:
+ line, prefix = read_line(), ''
+ # ignore comma at start of lines
+ if line.startswith(','):
+ line, prefix = line[1:], ','
+
+ if get_nosleep():
+ j = json.loads(line)
+ # insert information into the start of the json, but could be anywhere
+ j.insert(0, {'full_text' : '•', 'name' : 'nosleep'})
+ # and echo back new encoded json
+ print_line(prefix+json.dumps(j))
+ else:
+ print_line(prefix+line)
+#+end_src
+
+** rofi-light
+:PROPERTIES:
+:header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
+:END:
+
+#+begin_src bash
+cur=$(light -G)
+val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 12)
+[ -n "$val" ] && light -S $val
+#+end_src
+
+** rofi-remmina.py
+:PROPERTIES:
+:header-args+: :tangle ~/.local/bin/rofi-remmina.py :shebang "#!/usr/bin/env python2"
+:END:
+
+#+begin_src python
+import ConfigParser
+import os
+from subprocess import Popen, PIPE
+
+remmina_dir = os.path.expanduser("~/.local/share/remmina")
+
+fdict = dict()
+
+for f in os.listdir(remmina_dir):
+ fp = os.path.join(remmina_dir, f)
+ c = ConfigParser.ConfigParser()
+ c.read(fp)
+ n = c.get('remmina', 'name')
+ fdict[n] = fp
+
+lines = max(min(15, len(fdict)), 1);
+width = len(max(fdict.keys(), key=len))
+rofi = Popen(["rofi", "-i", "-dmenu", \
+ "-l", str(lines), "-width", str(width), \
+ "-p", "connection"], stdout=PIPE, stdin=PIPE)
+selected = rofi.communicate("\n" \
+ .join(fdict.keys()) \
+ .encode("utf-8"))[0] \
+ .decode("utf-8") \
+ .strip()
+rofi.wait()
+
+r = Popen(["remmina", "-c", fdict[selected]])
+r.wait()
+#+end_src
+
+** s (run sway)
+:PROPERTIES:
+:header-args+: :tangle ~/.local/bin/s :shebang "#!/bin/bash"
+:END:
+
+#+begin_src bash
+export _JAVA_AWT_WM_NONREPARENTING=1
+export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
+light -Nr 2
+source $HOME/.zprofile
+sway
+#+end_src
+
+** sway-ws-util
+:PROPERTIES:
+:header-args+: :tangle ~/.local/bin/sway-ws-util :shebang "#!/bin/bash"
+:END:
+
+#+begin_src bash
+curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name')
+[[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1))
+[[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1))
+dest_ws=-1
+op=-1
+
+if [ "$1" = "switch" ] || [ "$1" = "move" ]; then
+ op="$1"
+ if [ "$2" = "prev" ]; then
+ dest_ws="$prev_ws"
+ elif [ "$2" = "next" ]; then
+ dest_ws="$next_ws"
+ else
+ echo "Usage: $0 $1 {prev|next} [follow]"
+ exit 1
+ fi
+else
+ echo "Usage: $0 {switch|move} {prev|next} [follow]"
+ exit 1
+fi
+
+if [ "$op" = "switch" ]; then
+ sway workspace "$dest_ws"
+elif [ "$op" = "move" ]; then
+ sway move container to workspace "$dest_ws"
+ if [ "$3" = "follow" ]; then
+ sway workspace "$dest_ws"
+ fi
+fi
+#+end_src
+
+** toggle-layout
+:PROPERTIES:
+:header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
+:END:
+
+#+begin_src bash :tangle no
+lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
+
+if [ "$lang" = "us" ]; then
+ setxkbmap ir
+else
+ setxkbmap us
+ # xmodmap $HOME/.Xmodmap
+fi
+#+end_src
+
+** toggle-presentation-mode
+:PROPERTIES:
+:header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
+:END:
+
+#+begin_src bash :tangle no
+xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
+#+end_src
+
+** toggle-tablet
+:PROPERTIES:
+:header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
+:END:
+
+This script toggles between a 'normal' mode and a 'tablet' mode, doing
+a few things:
+
+- rotates the screen using =xrandr=, so that rotating the physical
+ display of my X220t would have the laptop's battery on the right
+ hand side,
+- enables touch screen,
+- properly rotates the stylus pen and touch screen pointers, and
+- toggles between RGB and Vertical BGR sub-pixel order.
+
+#+begin_src bash :tangle no
+case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
+ 0) # Screen is not rotated, we should rotate it right (90°)
+ xrandr -o 3
+ xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
+ xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
+ xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
+ xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
+ ;;
+ 1) # Currently top is rotated right, we should set it normal (0°)
+ xrandr -o 0
+ xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
+ xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
+ xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
+ xfconf-query -c xsettings -p /Xft/RGBA -s rgb
+ ;;
+ *)
+ echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
+ exit 1
+ ;;
+esac
+#+end_src
+
+** unlock-def-gk.py
+:PROPERTIES:
+:header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
+:END:
+
+#+begin_src python :tangle no
+import gnomekeyring as gk
+# list_item_ids_sync('login')[0] == 1L
+gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
+#+end_src
+
+** volume-info
+:PROPERTIES:
+:header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh"
+:END:
+
+#+begin_src sh :tangle no
+cur_vol=$(pamixer --get-volume)
+
+if [ $(pamixer --get-mute) = true ]; then
+ printf 'mt \n' "$cur_vol"
+else
+ printf '%02d \n' "$cur_vol"
+fi
+#+end_src
+
+** wp
+
+My little wallpaper changer script.
+
+*** wp
+:PROPERTIES:
+:header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
+:END:
+
+#+begin_src bash :tangle no
+export DISPLAY=:0
+
+case "$1" in
+ "day")
+ feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
+ ;;
+ "night")
+ feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
+ ;;
+ *)
+ echo $"Usage: $0 {day|night}"
+ exit 1
+esac
+#+end_src
+
+*** wp-auto
+:PROPERTIES:
+:header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
+:END:
+
+#+begin_src bash :tangle no
+SED=$(which sed)
+ROFI=$(which rofi)
+
+export DISPLAY=:0
+HOUR=$(date +%H)
+
+if [ -z "${SED}" ]
+then
+ echo "Did not find 'sed', script cannot continue."
+ exit 1
+fi
+if [ -z "${ROFI}" ]
+then
+ echo "Did not find rofi, there is no point to continue."
+ exit 1
+fi
+
+###
+# Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
+# Repeated calls should leave the config clean-ish
+###
+function set_theme()
+{
+ CDIR="${HOME}/.config/rofi/"
+ if [ ! -d "${CDIR}" ]
+ then
+ mkdir -p ${CDIR}
+ fi
+ if [ -f "${CDIR}/config" ]
+ then
+ ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
+ fi
+ echo "rofi.theme: ${1}" >> "${CDIR}/config"
+
+}
+
+if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
+ then
+ feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
+ xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
+ set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
+ else
+ feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
+ xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
+ set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
+fi
+#+end_src
+
+*** wp.service
+:PROPERTIES:
+:header-args+: :tangle ~/.config/systemd/user/wp.service
+:END:
+
+#+begin_src conf :tangle no
+[Unit]
+Description=wallpaper service
+
+[Service]
+Type=oneshot
+ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
+#+end_src
+
+*** wp.timer
+:PROPERTIES:
+:header-args+: :tangle ~/.config/systemd/user/wp.timer
+:END:
+
+#+begin_src conf :tangle no
+[Unit]
+[Unit]
+Description=wallpaper timer
+
+[Timer]
+OnCalendar=07,21:00
+Unit=wp.service
+Persistent=true
+
+[Install]
+WantedBy=timers.target
+#+end_src
+
+** zathura-sync.sh
+:PROPERTIES:
+:header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
+:END:
+
+#+begin_src sh
+pos="$1"
+pdffile="$2"
+zathura --synctex-forward "$pos" "$pdffile" || \
+ (
+ zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
+ sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
+#+end_src
+** Fun :)
+
+*** eat-em
+:PROPERTIES:
+:header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
+:END:
+
+#+begin_src sh
+# Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
+# [ESC] character in original post removed here.
+
+# ANSI Color -- use these variables to easily have different color
+# and format output. Make sure to output the reset sequence after
+# colors (f = foreground, b = background), and use the 'off'
+# feature for anything you turn on.
+
+initializeANSI()
+{
+ esc="$(echo -en '\e')"
+
+ blackf="${esc}[30m"; redf="${esc}[31m"; greenf="${esc}[32m"
+ yellowf="${esc}[33m" bluef="${esc}[34m"; purplef="${esc}[35m"
+ cyanf="${esc}[36m"; whitef="${esc}[37m"
+
+ blackb="${esc}[40m"; redb="${esc}[41m"; greenb="${esc}[42m"
+ yellowb="${esc}[43m" blueb="${esc}[44m"; purpleb="${esc}[45m"
+ cyanb="${esc}[46m"; whiteb="${esc}[47m"
+
+ boldon="${esc}[1m"; boldoff="${esc}[22m"
+ italicson="${esc}[3m"; italicsoff="${esc}[23m"
+ ulon="${esc}[4m"; uloff="${esc}[24m"
+ invon="${esc}[7m"; invoff="${esc}[27m"
+
+ reset="${esc}[0m"
+}
+
+# note in this first use that switching colors doesn't require a reset
+# first - the new color overrides the old one.
+
+#clear
+
+initializeANSI
+
+cat << EOF
+
+ ${yellowf} ▄███████▄${reset} ${redf} ▄██████▄${reset} ${greenf} ▄██████▄${reset} ${bluef} ▄██████▄${reset} ${purplef} ▄██████▄${reset} ${cyanf} ▄██████▄${reset}
+ ${yellowf}▄█████████▀▀${reset} ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset} ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset} ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset} ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset} ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
+ ${yellowf}███████▀${reset} ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset} ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset} ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset} ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset} ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
+ ${yellowf}███████▄${reset} ${redf}████████████${reset} ${greenf}████████████${reset} ${bluef}████████████${reset} ${purplef}████████████${reset} ${cyanf}████████████${reset}
+ ${yellowf}▀█████████▄▄${reset} ${redf}██▀██▀▀██▀██${reset} ${greenf}██▀██▀▀██▀██${reset} ${bluef}██▀██▀▀██▀██${reset} ${purplef}██▀██▀▀██▀██${reset} ${cyanf}██▀██▀▀██▀██${reset}
+ ${yellowf} ▀███████▀${reset} ${redf}▀ ▀ ▀ ▀${reset} ${greenf}▀ ▀ ▀ ▀${reset} ${bluef}▀ ▀ ▀ ▀${reset} ${purplef}▀ ▀ ▀ ▀${reset} ${cyanf}▀ ▀ ▀ ▀${reset}
+
+ ${boldon}${yellowf} ▄███████▄ ${redf} ▄██████▄ ${greenf} ▄██████▄ ${bluef} ▄██████▄ ${purplef} ▄██████▄ ${cyanf} ▄██████▄${reset}
+ ${boldon}${yellowf}▄█████████▀▀ ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄ ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄ ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄ ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄ ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
+ ${boldon}${yellowf}███████▀ ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███ ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███ ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███ ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███ ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
+ ${boldon}${yellowf}███████▄ ${redf}████████████ ${greenf}████████████ ${bluef}████████████ ${purplef}████████████ ${cyanf}████████████${reset}
+ ${boldon}${yellowf}▀█████████▄▄ ${redf}██▀██▀▀██▀██ ${greenf}██▀██▀▀██▀██ ${bluef}██▀██▀▀██▀██ ${purplef}██▀██▀▀██▀██ ${cyanf}██▀██▀▀██▀██${reset}
+ ${boldon}${yellowf} ▀███████▀ ${redf}▀ ▀ ▀ ▀ ${greenf}▀ ▀ ▀ ▀ ${bluef}▀ ▀ ▀ ▀ ${purplef}▀ ▀ ▀ ▀ ${cyanf}▀ ▀ ▀ ▀${reset}
+
+EOF
+#+end_src
+
+*** invade-em
+:PROPERTIES:
+:header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
+:END:
+
+#+begin_src bash
+#
+# ANSI color scheme script featuring Space Invaders
+#
+# Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
+# Modified by lolilolicon
+#
+
+f=3 b=4
+for j in f b; do
+ for i in {0..7}; do
+ printf -v $j$i %b "\e[${!j}${i}m"
+ done
+done
+bld=$'\e[1m'
+rst=$'\e[0m'
+
+cat << EOF
+
+ $f1 ▀▄ ▄▀ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4 ▀▄ ▄▀ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
+ $f1 ▄█▀███▀█▄ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4 ▄█▀███▀█▄ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
+ $f1█▀███████▀█ $f2▀▀███▀▀███▀▀ $f3▀█▀██▀█▀ $f4█▀███████▀█ $f5▀▀███▀▀███▀▀ $f6▀█▀██▀█▀$rst
+ $f1▀ ▀▄▄ ▄▄▀ ▀ $f2 ▀█▄ ▀▀ ▄█▀ $f3▀▄ ▄▀ $f4▀ ▀▄▄ ▄▄▀ ▀ $f5 ▀█▄ ▀▀ ▄█▀ $f6▀▄ ▄▀$rst
+
+ $bld$f1▄ ▀▄ ▄▀ ▄ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4▄ ▀▄ ▄▀ ▄ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
+ $bld$f1█▄█▀███▀█▄█ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4█▄█▀███▀█▄█ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
+ $bld$f1▀█████████▀ $f2▀▀▀██▀▀██▀▀▀ $f3▀▀█▀▀█▀▀ $f4▀█████████▀ $f5▀▀▀██▀▀██▀▀▀ $f6▀▀█▀▀█▀▀$rst
+ $bld$f1 ▄▀ ▀▄ $f2▄▄▀▀ ▀▀ ▀▀▄▄ $f3▄▀▄▀▀▄▀▄ $f4 ▄▀ ▀▄ $f5▄▄▀▀ ▀▀ ▀▀▄▄ $f6▄▀▄▀▀▄▀▄$rst
+
+
+ $f7▌$rst
+
+ $f7▌$rst
+
+ $f7 ▄█▄ $rst
+ $f7▄█████████▄$rst
+ $f7▀▀▀▀▀▀▀▀▀▀▀$rst
+
+EOF
projects / ~bandali / configs / blobdiff