#+title: rc.org
-#+property: header-args :comments link :mkdirp yes :results silent
+#+property: header-args :comments no :mkdirp yes :results silent
-* About
+This file contains some of the system-level (global) configuration
+files for various programs I use.
-This org file contains the configuration files of pretty much every
-program I use. The files are tangled (i.e. exported, or derived) from
-this file using =org-babel=.
-
-Note: This file is best viewed inside Emacs with org mode.
-
-* Configs
-
-This section contains the configuration files (dotfiles) of various
-programs I use.
-
-** dovecot
-:PROPERTIES:
-:header-args+: :tangle "/sudo::/etc/dovecot/dovecot.conf"
-:END:
-
-#+begin_src conf
-protocols = imap
-
-listen = 127.0.0.1
-log_path = /var/log/dovecot.log
-info_log_path = /var/log/dovecot-info.log
-
-ssl = no
-disable_plaintext_auth = no
-
-auth_verbose = yes
-auth_mechanisms = plain
-
-passdb {
- driver = passwd-file
- args = /etc/dovecot/passwd
-}
-
-userdb {
- driver = static
- args = uid=amin gid=amin home=/home/amin/mail/%d/%n
- default_fields = mail=maildir:/home/amin/mail/%d/%n/mail
-}
-
-# mail_home = /home/amin/mail/%d/%n
-# mail_location = maildir:/home/amin/mail/%d/%n/mail:LAYOUT=fs:INBOX=/home/amin/mail/%d/%n/mail/Inbox
-
-# namespace {
-# inbox = yes
-# separator = /
-# }
-
-mail_plugins = $mail_plugins fts fts_lucene
-
-plugin {
- fts = lucene
- fts_lucene = whitespace_chars=@.
- fts_autoindex = yes
-}
-#+end_src
-
-** libinput
-
-Improve XPS 15 9560's touchpad experience.
-
-# begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
-#+begin_src conf :tangle no
-Section "InputClass"
- Identifier "libinput touchpad catchall"
- Driver "libinput"
- MatchIsTouchpad "on"
- Option "ClickMethod" "clickfinger"
- Option "NaturalScrolling" "true"
- Option "Tapping" "on"
- Option "TappingButtonMap" "lrm"
-EndSection
-#+end_src
-
-** mkinitcpio
-
-#+begin_src conf :tangle /sudo::/etc/mkinitcpio.conf :comments none
-# vim:set ft=sh
-# MODULES
-# The following modules are loaded before any boot hooks are
-# run. Advanced users may wish to specify all system modules
-# in this array. For instance:
-# MODULES=(piix ide_disk reiserfs)
-MODULES=(i915)
-
-# BINARIES
-# This setting includes any additional binaries a given user may
-# wish into the CPIO image. This is run last, so it may be used to
-# override the actual binaries included by a given hook
-# BINARIES are dependency parsed, so you may safely ignore libraries
-BINARIES=()
-
-# FILES
-# This setting is similar to BINARIES above, however, files are added
-# as-is and are not parsed in any way. This is useful for config files.
-FILES=()
-
-# HOOKS
-# This is the most important setting in this file. The HOOKS control the
-# modules and scripts added to the image, and what happens at boot time.
-# Order is important, and it is recommended that you do not change the
-# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
-# help on a given hook.
-# 'base' is _required_ unless you know precisely what you are doing.
-# 'udev' is _required_ in order to automatically load modules
-# 'filesystems' is _required_ unless you specify your fs modules in MODULES
-# Examples:
-## This setup specifies all modules in the MODULES setting above.
-## No raid, lvm2, or encrypted root is needed.
-# HOOKS=(base)
-#
-## This setup will autodetect all modules for your system and should
-## work as a sane default
-# HOOKS=(base udev autodetect block filesystems)
-#
-## This setup will generate a 'full' image which supports most systems.
-## No autodetection is done.
-# HOOKS=(base udev block filesystems)
-#
-## This setup assembles a pata mdadm array with an encrypted root FS.
-## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
-# HOOKS=(base udev block mdadm encrypt filesystems)
-#
-## This setup loads an lvm2 volume group on a usb device.
-# HOOKS=(base udev block lvm2 filesystems)
-#
-## NOTE: If you have /usr on a separate partition, you MUST include the
-# usr, fsck and shutdown hooks.
-HOOKS=(base udev autodetect modconf block keyboard encrypt lvm2 resume filesystems fsck)
-
-# COMPRESSION
-# Use this to compress the initramfs image. By default, gzip compression
-# is used. Use 'cat' to create an uncompressed image.
-#COMPRESSION="gzip"
-#COMPRESSION="bzip2"
-#COMPRESSION="lzma"
-#COMPRESSION="xz"
-#COMPRESSION="lzop"
-#COMPRESSION="lz4"
-
-# COMPRESSION_OPTIONS
-# Additional options for the compressor
-#COMPRESSION_OPTIONS=()
-#+end_src
-
-** mpd
-:PROPERTIES:
-:header-args+: :tangle ~/.config/mpd/mpd.conf
-:END:
-
-#+begin_src conf
-# An example configuration file for MPD.
-# Read the user manual for documentation: http://www.musicpd.org/doc/user/
-
-
-# Files and directories #######################################################
-#
-# This setting controls the top directory which MPD will search to discover the
-# available audio files and add them to the daemon's online database. This
-# setting defaults to the XDG directory, otherwise the music directory will be
-# be disabled and audio files will only be accepted over ipc socket (using
-# file:// protocol) or streaming files over an accepted protocol.
-#
-music_directory "~/usr/music"
-#
-# This setting sets the MPD internal playlist directory. The purpose of this
-# directory is storage for playlists created by MPD. The server will use
-# playlist files not created by the server but only if they are in the MPD
-# format. This setting defaults to playlist saving being disabled.
-#
-playlist_directory "~/.mpd/playlists"
-#
-# This setting sets the location of the MPD database. This file is used to
-# load the database at server start up and store the database while the
-# server is not up. This setting defaults to disabled which will allow
-# MPD to accept files over ipc socket (using file:// protocol) or streaming
-# files over an accepted protocol.
-#
-db_file "~/.mpd/database"
-#
-# These settings are the locations for the daemon log files for the daemon.
-# These logs are great for troubleshooting, depending on your log_level
-# settings.
-#
-# The special value "syslog" makes MPD use the local syslog daemon. This
-# setting defaults to logging to syslog, otherwise logging is disabled.
-#
-log_file "~/.mpd/log"
-#
-# This setting sets the location of the file which stores the process ID
-# for use of mpd --kill and some init scripts. This setting is disabled by
-# default and the pid file will not be stored.
-#
-pid_file "~/.mpd/pid"
-#
-# This setting sets the location of the file which contains information about
-# most variables to get MPD back into the same general shape it was in before
-# it was brought down. This setting is disabled by default and the server
-# state will be reset on server start up.
-#
-state_file "~/.mpd/state"
-#
-# The location of the sticker database. This is a database which
-# manages dynamic information attached to songs.
-#
-sticker_file "~/.mpd/sticker.sql"
-#
-###############################################################################
-
-
-# General music daemon options ################################################
-#
-# This setting specifies the user that MPD will run as. MPD should never run as
-# root and you may use this setting to make MPD change its user ID after
-# initialization. This setting is disabled by default and MPD is run as the
-# current user.
-#
-#user "nobody"
-#
-# This setting specifies the group that MPD will run as. If not specified
-# primary group of user specified with "user" setting will be used (if set).
-# This is useful if MPD needs to be a member of group such as "audio" to
-# have permission to use sound card.
-#
-#group "nogroup"
-#
-# This setting sets the address for the daemon to listen on. Careful attention
-# should be paid if this is assigned to anything other then the default, any.
-# This setting can deny access to control of the daemon. Not effective if
-# systemd socket activiation is in use.
-#
-# For network
-#bind_to_address "any"
-#
-# And for Unix Socket
-#bind_to_address "~/.mpd/socket"
-#
-# This setting is the TCP port that is desired for the daemon to get assigned
-# to.
-#
-#port "6600"
-#
-# This setting controls the type of information which is logged. Available
-# setting arguments are "default", "secure" or "verbose". The "verbose" setting
-# argument is recommended for troubleshooting, though can quickly stretch
-# available resources on limited hardware storage.
-#
-#log_level "default"
-#
-# If you have a problem with your MP3s ending abruptly it is recommended that
-# you set this argument to "no" to attempt to fix the problem. If this solves
-# the problem, it is highly recommended to fix the MP3 files with vbrfix
-# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
-# point gapless MP3 playback can be enabled.
-#
-#gapless_mp3_playback "yes"
-#
-# Setting "restore_paused" to "yes" puts MPD into pause mode instead
-# of starting playback after startup.
-#
-#restore_paused "no"
-#
-# This setting enables MPD to create playlists in a format usable by other
-# music players.
-#
-#save_absolute_paths_in_playlists "no"
-#
-# This setting defines a list of tag types that will be extracted during the
-# audio file discovery process. The complete list of possible values can be
-# found in the user manual.
-#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
-#
-# This setting enables automatic update of MPD's database when files in
-# music_directory are changed.
-#
-#auto_update "yes"
-#
-# Limit the depth of the directories being watched, 0 means only watch
-# the music directory itself. There is no limit by default.
-#
-#auto_update_depth "3"
-#
-###############################################################################
-
-
-# Symbolic link behavior ######################################################
-#
-# If this setting is set to "yes", MPD will discover audio files by following
-# symbolic links outside of the configured music_directory.
-#
-#follow_outside_symlinks "yes"
-#
-# If this setting is set to "yes", MPD will discover audio files by following
-# symbolic links inside of the configured music_directory.
-#
-#follow_inside_symlinks "yes"
-#
-###############################################################################
-
-
-# Zeroconf / Avahi Service Discovery ##########################################
-#
-# If this setting is set to "yes", service information will be published with
-# Zeroconf / Avahi.
-#
-#zeroconf_enabled "yes"
-#
-# The argument to this setting will be the Zeroconf / Avahi unique name for
-# this MPD server on the network.
-#
-#zeroconf_name "Music Player"
-#
-###############################################################################
-
-
-# Permissions #################################################################
-#
-# If this setting is set, MPD will require password authorization. The password
-# setting can be specified multiple times for different password profiles.
-#
-#password "password@read,add,control,admin"
-#
-# This setting specifies the permissions a user has who has not yet logged in.
-#
-#default_permissions "read,add,control,admin"
-#
-###############################################################################
-
-
-# Database #######################################################################
-#
-
-#database {
-# plugin "proxy"
-# host "other.mpd.host"
-# port "6600"
-#}
-
-# Input #######################################################################
-#
-
-input {
- plugin "curl"
-# proxy "proxy.isp.com:8080"
-# proxy_user "user"
-# proxy_password "password"
-}
-
-#
-###############################################################################
-
-# Audio Output ################################################################
-#
-
-audio_output {
- type "pulse"
- name "pulse audio"
-}
-
-audio_output {
- type "fifo"
- name "my_fifo"
- path "/tmp/mpd.fifo"
- format "44100:16:2"
-}
-
-# MPD supports various audio output types, as well as playing through multiple
-# audio outputs at the same time, through multiple audio_output settings
-# blocks. Setting this block is optional, though the server will only attempt
-# autodetection for one sound card.
-#
-# An example of an ALSA output:
-#
-#audio_output {
-# type "alsa"
-# name "My ALSA Device"
-## device "hw:0,0" # optional
-## mixer_type "hardware" # optional
-## mixer_device "default" # optional
-## mixer_control "PCM" # optional
-## mixer_index "0" # optional
-#}
-#
-# An example of an OSS output:
-#
-#audio_output {
-# type "oss"
-# name "My OSS Device"
-## device "/dev/dsp" # optional
-## mixer_type "hardware" # optional
-## mixer_device "/dev/mixer" # optional
-## mixer_control "PCM" # optional
-#}
-#
-# An example of a shout output (for streaming to Icecast):
-#
-#audio_output {
-# type "shout"
-# encoder "vorbis" # optional
-# name "My Shout Stream"
-# host "localhost"
-# port "8000"
-# mount "/mpd.ogg"
-# password "hackme"
-# quality "5.0"
-# bitrate "128"
-# format "44100:16:1"
-## protocol "icecast2" # optional
-## user "source" # optional
-## description "My Stream Description" # optional
-## url "http://example.com" # optional
-## genre "jazz" # optional
-## public "no" # optional
-## timeout "2" # optional
-## mixer_type "software" # optional
-#}
-#
-# An example of a recorder output:
-#
-#audio_output {
-# type "recorder"
-# name "My recorder"
-# encoder "vorbis" # optional, vorbis or lame
-# path "/var/lib/mpd/recorder/mpd.ogg"
-## quality "5.0" # do not define if bitrate is defined
-# bitrate "128" # do not define if quality is defined
-# format "44100:16:1"
-#}
-#
-# An example of a httpd output (built-in HTTP streaming server):
-#
-#audio_output {
-# type "httpd"
-# name "My HTTP Stream"
-# encoder "vorbis" # optional, vorbis or lame
-# port "8000"
-# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
-## quality "5.0" # do not define if bitrate is defined
-# bitrate "128" # do not define if quality is defined
-# format "44100:16:1"
-# max_clients "0" # optional 0=no limit
-#}
-#
-# An example of a pulseaudio output (streaming to a remote pulseaudio server)
-#
-#audio_output {
-# type "pulse"
-# name "My Pulse Output"
-## server "remote_server" # optional
-## sink "remote_server_sink" # optional
-#}
-#
-# An example of a winmm output (Windows multimedia API).
-#
-#audio_output {
-# type "winmm"
-# name "My WinMM output"
-## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
-# or
-## device "0" # optional
-## mixer_type "hardware" # optional
-#}
-#
-# An example of an openal output.
-#
-#audio_output {
-# type "openal"
-# name "My OpenAL output"
-## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
-#}
-#
-# An example of an sndio output.
-#
-#audio_output {
-# type "sndio"
-# name "sndio output"
-# mixer_type "software"
-#}
-#
-# An example of an OS X output:
-#
-#audio_output {
-# type "osx"
-# name "My OS X Device"
-## device "Built-in Output" # optional
-## channel_map "-1,-1,0,1" # optional
-#}
-#
-## Example "pipe" output:
-#
-#audio_output {
-# type "pipe"
-# name "my pipe"
-# command "aplay -f cd 2>/dev/null"
-## Or if you're want to use AudioCompress
-# command "AudioCompress -m | aplay -f cd 2>/dev/null"
-## Or to send raw PCM stream through PCM:
-# command "nc example.org 8765"
-# format "44100:16:2"
-#}
-#
-## An example of a null output (for no audio output):
-#
-#audio_output {
-# type "null"
-# name "My Null Output"
-# mixer_type "none" # optional
-#}
-#
-###############################################################################
-
-
-# Normalization automatic volume adjustments ##################################
-#
-# This setting specifies the type of ReplayGain to use. This setting can have
-# the argument "off", "album", "track" or "auto". "auto" is a special mode that
-# chooses between "track" and "album" depending on the current state of
-# random playback. If random playback is enabled then "track" mode is used.
-# See <http://www.replaygain.org> for more details about ReplayGain.
-# This setting is off by default.
-#
-#replaygain "album"
-#
-# This setting sets the pre-amp used for files that have ReplayGain tags. By
-# default this setting is disabled.
-#
-#replaygain_preamp "0"
-#
-# This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
-# By default this setting is disabled.
-#
-#replaygain_missing_preamp "0"
-#
-# This setting enables or disables ReplayGain limiting.
-# MPD calculates actual amplification based on the ReplayGain tags
-# and replaygain_preamp / replaygain_missing_preamp setting.
-# If replaygain_limit is enabled MPD will never amplify audio signal
-# above its original level. If replaygain_limit is disabled such amplification
-# might occur. By default this setting is enabled.
-#
-#replaygain_limit "yes"
-#
-# This setting enables on-the-fly normalization volume adjustment. This will
-# result in the volume of all playing audio to be adjusted so the output has
-# equal "loudness". This setting is disabled by default.
-#
-#volume_normalization "no"
-#
-###############################################################################
-
-# Character Encoding ##########################################################
-#
-# If file or directory names do not display correctly for your locale then you
-# may need to modify this setting.
-#
-#filesystem_charset "UTF-8"
-#
-###############################################################################
-#+end_src
-
-** ncmpcpp
-
-*** config
-:PROPERTIES:
-:header-args+: :tangle ~/.ncmpcpp/config
-:END:
-
-#+begin_src conf :tangle no
-##############################################################
-## This is the example configuration file. Copy it to ##
-## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
-## and set up your preferences. ##
-##############################################################
-#
-##### directories ######
-##
-## Directory for storing ncmpcpp related files.
-## Changing it is useful if you want to store
-## everything somewhere else and provide command
-## line setting for alternative location to config
-## file which defines that while launching ncmpcpp.
-##
-#
-ncmpcpp_directory = ~/.ncmpcpp
-#
-##
-## Directory for storing downloaded lyrics. It
-## defaults to ~/.lyrics since other MPD clients
-## (eg. ncmpc) also use that location.
-##
-#
-#lyrics_directory = ~/.lyrics
-#
-##### connection settings #####
-#
-#mpd_host = localhost
-#
-#mpd_port = 6600
-#
-#mpd_connection_timeout = 5
-#
-## Needed for tag editor and file operations to work.
-##
-mpd_music_dir = ~/usr/music
-#
-#mpd_crossfade_time = 5
-#
-##### music visualizer #####
-##
-## Note: In order to make music visualizer work you'll
-## need to use mpd fifo output, whose format parameter
-## has to be set to 44100:16:1 for mono visualization
-## or 44100:16:2 for stereo visualization. Example
-## configuration (it has to be put into mpd.conf):
-##
-## audio_output {
-## type "fifo"
-## name "Visualizer feed"
-## path "/tmp/mpd.fifo"
-## format "44100:16:2"
-## }
-##
-#
-visualizer_fifo_path = /tmp/mpd.fifo
-#
-##
-## Note: Below parameter is needed for ncmpcpp
-## to determine which output provides data for
-## visualizer and thus allow syncing between
-## visualization and sound as currently there
-## are some problems with it.
-##
-#
-visualizer_output_name = my fifo
-#
-##
-## If you set format to 44100:16:2, make it 'yes'.
-##
-visualizer_in_stereo = yes
-#
-##
-## Multiply received samples by given value. Very
-## useful for proper visualization of quiet music.
-##
-#visualizer_sample_multiplier = 1
-#
-##
-## Note: Below parameter defines how often ncmpcpp
-## has to "synchronize" visualizer and audio outputs.
-## 30 seconds is optimal value, but if you experience
-## synchronization problems, set it to lower value.
-## Keep in mind that sane values start with >=10.
-##
-#
-visualizer_sync_interval = 30
-#
-##
-## Note: To enable spectrum frequency visualization
-## you need to compile ncmpcpp with fftw3 support.
-##
-#
-## Available values: spectrum, wave, wave_filled, ellipse.
-##
-visualizer_type = spectrum
-#
-#visualizer_look = ●▮
-visualizer_look = "●•"
-#
-#visualizer_color = blue, cyan, green, yellow, magenta, red
-#
-## Alternative subset of 256 colors for terminals that support it.
-##
-#visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
-#
-##### system encoding #####
-##
-## ncmpcpp should detect your charset encoding
-## but if it failed to do so, you can specify
-## charset encoding you are using here.
-##
-## Note: You can see whether your ncmpcpp build
-## supports charset detection by checking output
-## of `ncmpcpp --version`.
-##
-## Note: Since MPD uses UTF-8 by default, setting
-## this option makes sense only if your encoding
-## is different.
-##
-#
-#system_encoding = ""
-#
-##### delays #####
-#
-## Time of inactivity (in seconds) after playlist
-## highlighting will be disabled (0 = always on).
-##
-#playlist_disable_highlight_delay = 5
-#
-## Defines how long messages are supposed to be visible.
-##
-#message_delay_time = 5
-#
-##### song format #####
-##
-## For a song format you can use:
-##
-## %l - length
-## %f - filename
-## %D - directory
-## %a - artist
-## %A - album artist
-## %t - title
-## %b - album
-## %y - date
-## %n - track number (01/12 -> 01)
-## %N - full track info (01/12 -> 01/12)
-## %g - genre
-## %c - composer
-## %p - performer
-## %d - disc
-## %C - comment
-## %P - priority
-## $R - begin right alignment
-##
-## If you want to make sure that a part of the format is displayed
-## only when certain tags are present, you can archieve it by
-## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
-## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
-## It is also possible to define a list of alternatives by providing
-## several groups and separating them with '|', e.g. '{%t}|{%f}'
-## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
-## present.
-##
-## Note: If you want to set limit on maximal length of a tag, just
-## put the appropriate number between % and character that defines
-## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
-##
-## In addition, formats support markers used for text attributes.
-## They are followed by character '$'. After that you can put:
-##
-## - 0 - default window color (discards all other colors)
-## - 1 - black
-## - 2 - red
-## - 3 - green
-## - 4 - yellow
-## - 5 - blue
-## - 6 - magenta
-## - 7 - cyan
-## - 8 - white
-## - 9 - end of current color
-## - b - bold text
-## - u - underline text
-## - r - reverse colors
-## - a - use alternative character set
-##
-## If you don't want to use a non-color attribute anymore, just put it
-## again, but this time insert character '/' between '$' and attribute
-## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
-## or filename with reversed colors.
-##
-## If you want to use 256 colors and/or background colors in formats
-## (the naming scheme is described below in section about color
-## definitions), it can be done with the syntax $(COLOR), e.g. to set
-## the artist tag to one of the non-standard colors and make it have
-## yellow background, you need to write $(197_yellow)%a$(end). Note
-## that for standard colors this is interchangable with attributes
-## listed above.
-##
-## Note: colors can be nested.
-##
-#
-#song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
-#
-#song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
-#
-#song_library_format = {%n - }{%t}|{%f}
-#
-#
-#alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
-#
-#alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
-#
-#now_playing_prefix = $b
-#
-#now_playing_suffix = $/b
-#
-#browser_playlist_prefix = "$2playlist$9 "
-#
-#selected_item_prefix = $6
-#
-#selected_item_suffix = $9
-#
-#modified_item_prefix = $3> $9
-#
-##
-## Note: attributes are not supported for the following variables.
-##
-#song_window_title_format = {%a - }{%t}|{%f}
-##
-## Note: Below variables are used for sorting songs in browser.
-## The sort mode determines how songs are sorted, and can be used
-## in combination with a sort format to specify a custom sorting format.
-## Available values for browser_sort_mode are "name", "mtime", "format"
-## and "noop".
-##
-#
-#browser_sort_mode = name
-#
-#browser_sort_format = {%a - }{%t}|{%f} {(%l)}
-#
-##### columns settings #####
-##
-## syntax of song columns list format is "column column etc."
-##
-## - syntax for each column is:
-##
-## (width of the column)[color of the column]{displayed tag}
-##
-## Note: Width is by default in %, if you want a column to
-## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
-## will be the column that take 10% of screen (so the real width
-## will depend on actual screen size), whereas (10f)[white]{a}
-## will take 10 terminal cells, no matter how wide the screen is.
-##
-## - color is optional (if you want the default one,
-## leave the field empty).
-##
-## Note: You can give a column additional attributes by putting appropriate
-## character after displayed tag character. Available attributes are:
-##
-## - r - column will be right aligned
-## - E - if tag is empty, empty tag marker won't be displayed
-##
-## You can also:
-##
-## - give a column custom name by putting it after attributes,
-## separated with character ':', e.g. {lr:Length} gives you
-## right aligned column of lengths named "Length".
-##
-## - define sequence of tags, that have to be displayed in case
-## predecessor is empty in a way similar to the one in classic
-## song format, i.e. using '|' character, e.g. {a|c|p:Owner}
-## creates column named "Owner" that tries to display artist
-## tag and then composer and performer if previous ones are
-## not available.
-##
-#
-#song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
-#
-##### various settings #####
-#
-##
-## Note: Custom command that will be executed each
-## time song changes. Useful for notifications etc.
-##
-#execute_on_song_change = ""
-#
-#playlist_show_mpd_host = no
-#
-#playlist_show_remaining_time = no
-#
-#playlist_shorten_total_times = no
-#
-#playlist_separate_albums = no
-#
-##
-## Note: Possible display modes: classic, columns.
-##
-#playlist_display_mode = columns
-#
-#browser_display_mode = classic
-#
-#search_engine_display_mode = classic
-#
-#playlist_editor_display_mode = classic
-#
-#discard_colors_if_item_is_selected = yes
-#
-#incremental_seeking = yes
-#
-#seek_time = 1
-#
-#volume_change_step = 2
-#
-#autocenter_mode = no
-#
-#centered_cursor = no
-#
-##
-## Note: You can specify third character which will
-## be used to build 'empty' part of progressbar.
-##
-#progressbar_look = =>
-progressbar_look = "─╼╶"
-#progressbar_look = "─⊙╶"
-#
-#progressbar_boldness = yes
-#
-## Available values: database, playlist.
-##
-#default_place_to_search_in = database
-#
-## Available values: classic, alternative.
-##
-#user_interface = classic
-#
-#data_fetching_delay = yes
-#
-## Available values: artist, album_artist, date, genre, composer, performer.
-##
-#media_library_primary_tag = artist
-#
-## Available values: wrapped, normal.
-##
-#default_find_mode = wrapped
-#
-#default_tag_editor_pattern = %n - %t
-#
-#header_visibility = yes
-#
-#statusbar_visibility = yes
-#
-#titles_visibility = yes
-#
-#header_text_scrolling = yes
-#
-#cyclic_scrolling = no
-#
-#lines_scrolled = 2
-#
-#follow_now_playing_lyrics = no
-#
-#fetch_lyrics_for_current_song_in_background = no
-#
-#store_lyrics_in_song_dir = no
-#
-#generate_win32_compatible_filenames = yes
-#
-#allow_for_physical_item_deletion = no
-#
-##
-## Note: If you set this variable, ncmpcpp will try to
-## get info from last.fm in language you set and if it
-## fails, it will fall back to english. Otherwise it will
-## use english the first time.
-##
-## Note: Language has to be expressed as an ISO 639 alpha-2 code.
-##
-#lastfm_preferred_language = en
-#
-#show_hidden_files_in_local_browser = no
-#
-##
-## How shall screen switcher work?
-##
-## - "previous" - switch between the current and previous screen.
-## - "screen1,...,screenN" - switch between given sequence of screens.
-##
-## Screens available for use: help, playlist, browser, search_engine,
-## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
-##
-#screen_switcher_mode = playlist, browser
-#
-##
-## Note: You can define startup screen
-## by choosing screen from the list above.
-##
-#startup_screen = playlist
-#
-##
-## Note: You can define startup slave screen
-## by choosing screen from the list above or
-## an empty value for no slave screen.
-##
-#startup_slave_screen = ""
-#
-#startup_slave_screen_focus = no
-#
-##
-## Default width of locked screen (in %).
-## Acceptable values are from 20 to 80.
-##
-#
-#locked_screen_width_part = 50
-#
-#ask_for_locked_screen_width_part = yes
-#
-#jump_to_now_playing_song_at_start = yes
-#
-#ask_before_clearing_playlists = yes
-#
-#clock_display_seconds = no
-#
-#display_volume_level = yes
-#
-#display_bitrate = no
-#
-#display_remaining_time = no
-#
-## Available values: none, basic, extended, perl.
-##
-#regular_expressions = perl
-#
-##
-## Note: If below is enabled, ncmpcpp will ignore leading
-## "The" word while sorting items in browser, tags in
-## media library, etc.
-##
-#ignore_leading_the = no
-#
-#block_search_constraints_change_if_items_found = yes
-#
-#mouse_support = yes
-#
-#mouse_list_scroll_whole_page = yes
-#
-#empty_tag_marker = <empty>
-#
-#tags_separator = " | "
-#
-#tag_editor_extended_numeration = no
-#
-#media_library_sort_by_mtime = no
-#
-#enable_window_title = yes
-#
-##
-## Note: You can choose default search mode for search
-## engine. Available modes are:
-##
-## - 1 - use mpd built-in searching (no regexes, pattern matching)
-## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
-## but if your mpd is on a remote machine, downloading big database
-## to process it can take a while
-## - 3 - match only exact values (this mode uses mpd function for searching
-## in database and local one for searching in current playlist)
-##
-#
-#search_engine_default_search_mode = 1
-#
-#external_editor = nano
-#
-## Note: set to yes if external editor is a console application.
-##
-#use_console_editor = yes
-#
-##### colors definitions #####
-##
-## It is possible to set a background color by setting a color
-## value "<foreground>_<background>", e.g. red_black will set
-## foregound color to red and background color to black.
-##
-## In addition, for terminals that support 256 colors it
-## is possible to set one of them by using a number in range
-## [1, 256] instead of color name, e.g. numerical value
-## corresponding to red_black is 2_1. To find out if the
-## terminal supports 256 colors, run ncmpcpp and check out
-## the bottom of the help screen for list of available colors
-## and their numerical values.
-##
-## Note: due to technical limitations of ncurses, if 256 colors
-## are used, it is possible to either use only the colors with
-## default background color, or all pairs from 1_1 up to 254_127,
-## depending on the ncurses version used.
-##
-#
-#colors_enabled = yes
-#
-#empty_tag_color = cyan
-#
-#header_window_color = default
-#
-#volume_color = default
-#
-#state_line_color = default
-#
-#state_flags_color = default
-#
-#main_window_color = yellow
-#
-#color1 = white
-#
-#color2 = green
-#
-#main_window_highlight_color = yellow
-#
-#progressbar_color = black
-#
-#progressbar_elapsed_color = green
-#
-#statusbar_color = default
-#
-#alternative_ui_separator_color = black
-#
-#active_column_color = red
-#
-#window_border_color = green
-#
-#active_window_border = red
-#
-#+end_src
-
-*** bindings
-:PROPERTIES:
-:header-args+: :tangle ~/.ncmpcpp/bindings
-:END:
-
-#+begin_src conf :tangle no
-def_key "j"
- scroll_down
-def_key "k"
- scroll_up
-
-def_key "ctrl-u"
- page_up
-def_key "ctrl-d"
- page_down
-
-def_key "h"
- previous_column
-def_key "l"
- next_column
-
-def_key "."
- show_lyrics
-
-def_key "n"
- next_found_item
-def_key "N"
- previous_found_item
-
-def_key "J"
- move_sort_order_down
-def_key "K"
- move_sort_order_up
-#+end_src
-
-** pacman
-
-*** conf
-
-#+begin_src conf :tangle /sudo::/etc/pacman.conf :comments none
-#
-# /etc/pacman.conf
-#
-# See the pacman.conf(5) manpage for option and repository directives
-
-#
-# GENERAL OPTIONS
-#
-[options]
-# The following paths are commented out with their default values listed.
-# If you wish to use different paths, uncomment and update the paths.
-#RootDir = /
-#DBPath = /var/lib/pacman/
-#CacheDir = /var/cache/pacman/pkg/
-#LogFile = /var/log/pacman.log
-#GPGDir = /etc/pacman.d/gnupg/
-#HookDir = /etc/pacman.d/hooks/
-HoldPkg = pacman glibc
-#XferCommand = /usr/bin/curl -L -C - -f -o %o %u
-#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
-#CleanMethod = KeepInstalled
-#UseDelta = 0.7
-Architecture = auto
-
-# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
-#IgnorePkg =
-#IgnoreGroup =
-
-#NoUpgrade =
-#NoExtract =
-
-# Misc options
-#UseSyslog
-Color
-TotalDownload
-CheckSpace
-VerbosePkgLists
-
-# By default, pacman accepts packages signed by keys that its local keyring
-# trusts (see pacman-key and its man page), as well as unsigned packages.
-SigLevel = Required DatabaseOptional
-LocalFileSigLevel = Optional
-#RemoteFileSigLevel = Required
-
-# NOTE: You must run `pacman-key --init` before first using pacman; the local
-# keyring can then be populated with the keys of all Arch/Parabola packagers
-# with `pacman-key --populate archlinux` and `pacman-key --populate parabola`.
-
-#
-# REPOSITORIES
-# - can be defined here or included from another file
-# - pacman will search repositories in the order defined here
-# - local/custom mirrors can be added here or in separate files
-# - repositories listed first will take precedence when packages
-# have identical names, regardless of version number
-# - URLs will have $repo replaced by the name of the current repo
-# - URLs will have $arch replaced by the name of the architecture
-#
-# Repository entries are of the format:
-# [repo-name]
-# Server = ServerName
-# Include = IncludePath
-#
-# The header [repo-name] is crucial - it must be present and
-# uncommented to enable the repo.
-#
-
-# The testing repositories are disabled by default. To enable, uncomment the
-# repo name header and Include lines. You can add preferred servers immediately
-# after the header, and they will be used before the default mirrors.
-
-# NOTE: Nonprism is a particular repository that aims to provide software built
-# and patched without services under global data surveillance programs like PRISM,
-# XKeyscore and Tempora. For more info see: https://wiki.parabola.nu/Nonprism
-
-#[nonprism-testing]
-#Include = /etc/pacman.d/mirrorlist
-
-#[nonprism]
-#Include = /etc/pacman.d/mirrorlist
-
-[libre-testing]
-Include = /etc/pacman.d/mirrorlist
-
-[libre]
-Include = /etc/pacman.d/mirrorlist
-
-#[testing]
-#Include = /etc/pacman.d/mirrorlist
-
-[core]
-Include = /etc/pacman.d/mirrorlist
-
-[extra]
-Include = /etc/pacman.d/mirrorlist
-
-#[community-testing]
-#Include = /etc/pacman.d/mirrorlist
-
-[community]
-Include = /etc/pacman.d/mirrorlist
-
-# The PCR (Parabola Community Repository) contains packages maintained by trusted
-# members of the Parabola community. It also contains packages maintained by
-# Parabola developers, but that the developer decided didn't belong in core/libre.
-
-#[pcr-testing]
-#Include = /etc/pacman.d/mirrorlist
-
-[pcr]
-Include = /etc/pacman.d/mirrorlist
-
-# If you want to run 32 bit applications on your x86_64 system,
-# enable the libre-multilib, multilib and pcr-multilib repositories as required here.
-
-#[nonprism-multilib-testing]
-#Include = /etc/pacman.d/mirrorlist
-
-#[nonprism-multilib]
-#Include = /etc/pacman.d/mirrorlist
-
-#[libre-multilib-testing]
-#Include = /etc/pacman.d/mirrorlist
-
-#[libre-multilib]
-#Include = /etc/pacman.d/mirrorlist
-
-#[multilib-testing]
-#Include = /etc/pacman.d/mirrorlist
-
-#[multilib]
-#Include = /etc/pacman.d/mirrorlist
-
-#[pcr-multilib-testing]
-#Include = /etc/pacman.d/mirrorlist
-
-#[pcr-multilib]
-#Include = /etc/pacman.d/mirrorlist
-
-# Parabola also supports another community projects and personal repositories, to
-# find them check out this wiki page: https://wiki.parabola.nu/Repositories
-
-# An example of a custom package repository. See the pacman manpage for
-# tips on creating your own repositories.
-#[custom]
-#SigLevel = Optional TrustAll
-#Server = file:///home/custompkgs
-
-Include = /etc/pacman.d/*.conf
-#+end_src
-
-*** mirrorlist
-
-#+begin_src conf :tangle /sudo::/etc/pacman.d/mirrorlist :comments none
-# Parabola GNU/Linux-libre - Last Updated: Wed Dec 20 02:59:35 GMT 2017
-
-Server = http://mirror.fsf.org/parabola/$repo/os/$arch
-Server = http://mirror.fsf.org/parabola/$repo/os/$arch
-Server = http://mirror.fsf.org/parabola/$repo/os/$arch
-Server = http://mirror.fsf.org/parabola/$repo/os/$arch
-
-# Location: London, UK
-# Responsible: Parabola Project
-# Note: Not really a mirror, automatically redirects you to an Arch
-# mirror when possible. Works best specifying it a few times in a
-# row (404s workaround).
-# Server = http://redirector.parabola.nu/$repo/os/$arch
-Server = https://redirector.parabola.nu/$repo/os/$arch
-
-# Location: Reykjavík, Iceland
-# Responsible: Parabola Project
-# Note: Not really a mirror, automatically redirects you to a Parabola
-# mirror that has the file you are looking for.
-# Server = http://repomirror.parabola.nu/$repo/os/$arch
-Server = https://repomirror.parabola.nu/$repo/os/$arch
-
-# Location: Falkenstein, Germany
-# Server = http://mirror.grapentin.org/parabola/$repo/os/$arch
-Server = https://mirror.grapentin.org/parabola/$repo/os/$arch
-
-# Location: Volendam, Netherlands
-Server = https://jeweet.net/repo/parabola/$repo/os/$arch
-
-# Location: Amsterdam, Netherlands
-# Note: Not really a mirror, but a high-speed 10GiB cache for
-# mirror.yandex.ru/mirrors/parabola
-# Server = http://parabola.isacdaavid.info:8080/$repo/os/$arch
-Server = https://parabola.isacdaavid.info:8081/$repo/os/$arch
-
-# Location: Moscow, Russian Federation
-# Server = http://mirror.yandex.ru/mirrors/parabola/$repo/os/$arch
-Server = https://mirror.yandex.ru/mirrors/parabola/$repo/os/$arch
-
-# Location: Ho Chi Minh City, Vietnam
-# Server = http://mirror.freedif.org/Parabola/$repo/os/$arch
-Server = https://mirror.freedif.org/Parabola/$repo/os/$arch
-
-# Location: Los Angeles, CA, USA
-# Note: Also visit http://alfplayer.com/ for its SNAPSHOTS ARCHIVE
-Server = http://alfplayer.com/parabola/$repo/os/$arch
-
-# Location: Boston, MA, USA
-Server = http://mirror.fsf.org/parabola/$repo/os/$arch
-
-# Location: Austin, TX, USA
-# Server = http://parabola.serverpit.com/
-Server = https://parabola.serverpit.com/
-
-# Location: Reykjavík, Iceland
-# Responsible: Parabola Project
-# Note: Currently pointing to repomirror.parabola.nu
-# Server = http://repo.parabola.nu/$repo/os/$arch
-Server = https://repo.parabola.nu/$repo/os/$arch
-#+end_src
-
-** pigeonhole
-*** amin.sieve
-:PROPERTIES:
-:header-args+: :tangle ~/mail/bndl.org/amin/sieve/amin.sieve :comments none
-:END:
-
-#+begin_src conf
-require ["regex", "variables", "fileinto", "envelope",
- "mailbox", "imap4flags", "include"];
-
-# webmasters
-if anyof (
- address :is "from" ["webmasters@gnu.org", "webmasters-comment@gnu.org"]) {
- fileinto :create "gnu.webmasters";
- stop;
-}
-
-include :personal "lists";
-#+end_src
-
-*** lists.sieve
-:PROPERTIES:
-:header-args+: :tangle ~/mail/bndl.org/amin/sieve/lists.sieve :comments none
-:END:
-
-#+begin_src conf
-require ["regex", "variables", "fileinto", "envelope",
- "mailbox", "imap4flags", "include"];
-
-# mailing lists
-if anyof (
- header :contains "list-id"
- [ "<emacs-devel.gnu.org>"
- , "<emacs-orgmode.gnu.org>"
- , "<emacsconf-discuss.gnu.org>"
- , "<fencepost-users.gnu.org>"
- , "<guix-devel.gnu.org>"
- , "<guile-devel.gnu.org>"
- , "<help-gnu-emacs.gnu.org>"
- , "<info-gnu-emacs.gnu.org>"
- , "<info-guix.gnu.org>"
- , "<www-commits.gnu.org>"
- , "<www-discuss.gnu.org>"
- , "<deepspec.lists.cs.princeton.edu>"
- , "<haskell-cafe.haskell.org>"
- , "<haskell-art.we.lurk.org>"
- , "<notmuch.notmuchmail.org>"
- ] ) {
- if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
- set :lower "listname" "${1}";
- fileinto :create "gnu.${listname}";
- stop;
- }
-}
-
-# sr.ht lists, with dots ('.') omitted
-if anyof (
- header :contains "list-id"
- [ "<~bandali/public-inbox@lists.sr.ht>"
- , "<~sircmpwn/sr.ht-admins@lists.sr.ht>"
- , "<~sircmpwn/sr.ht-announce@lists.sr.ht>"
- , "<~sircmpwn/sr.ht-dev@lists.sr.ht>"
- , "<~sircmpwn/sr.ht-discuss@lists.sr.ht>"
- ] ) {
- if header :regex "list-id" "(~[a-z_0-9-]+)/([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)@" {
- set :lower "username" "${1}";
- set :lower "listname" "${2}${3}${4}${5}${6}${7}";
- fileinto :create "gnu.${username}.${listname}";
- stop;
- }
-}
-#+end_src
-
-** PowerTOP
-:PROPERTIES:
-:header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
-:END:
-
-#+begin_src conf
-[Unit]
-Description=Powertop tunings
-
-[Service]
-ExecStart=/usr/bin/powertop --auto-tune
-RemainAfterExit=true
-
-[Install]
-WantedBy=multi-user.target
-#+end_src
-
-** redshift
-:PROPERTIES:
-:header-args+: :tangle ~/.config/redshift.conf :comments none
-:END:
-
-#+begin_src conf
-; Global settings for redshift
-[redshift]
-; Set the day and night screen temperatures (Neutral is 6500K)
-;temp-day=5700
-;temp-night=3500
-
-;temp-day=6500
-temp-day=6200
-;temp-night=4800
-;temp-night=5000
-;temp-night=4500
-temp-night=4000
-
-; Enable/Disable a smooth transition between day and night
-; 0 will cause a direct change from day to night screen temperature.
-; 1 will gradually increase or decrease the screen temperature.
-transition=1
-
-; Set the screen brightness. Default is 1.0.
-;brightness=0.9
-; It is also possible to use different settings for day and night
-; since version 1.8.
-;brightness-day=0.7
-;brightness-night=0.4
-; Set the screen gamma (for all colors, or each color channel
-; individually)
-;gamma=0.8
-;gamma=1.0
-;gamma=0.8:0.7:0.8
-; This can also be set individually for day and night since
-; version 1.10.
-;gamma-day=0.8:0.7:0.8
-;gamma-night=0.6
-
-; Set the location-provider: 'geoclue2' or 'manual'
-; type 'redshift -l list' to see possible values.
-; The location provider settings are in a different section.
-;location-provider=manual
-location-provider=geoclue2
-
-; Set the adjustment-method: 'randr', 'vidmode'
-; type 'redshift -m list' to see all possible values.
-; 'randr' is the preferred method, 'vidmode' is an older API.
-; but works in some cases when 'randr' does not.
-; The adjustment method settings are in a different section.
-adjustment-method=randr
-
-; Configuration of the location-provider:
-; type 'redshift -l PROVIDER:help' to see the settings.
-; ex: 'redshift -l manual:help'
-; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
-; are negative numbers.
-;[manual]
-;lat=48.1
-;lon=11.6
-
-; Configuration of the adjustment-method
-; type 'redshift -m METHOD:help' to see the settings.
-; ex: 'redshift -m randr:help'
-; In this example, randr is configured to adjust screen 1.
-; Note that the numbering starts from 0, so this is actually the
-; second screen. If this option is not specified, Redshift will try
-; to adjust _all_ screens.
-;[randr]
-;screen=1
-#+end_src
-
-** systemd
+* systemd
Keep boot messages on tty1 (see [[https://wiki.archlinux.org/index.php/getty#Have_boot_messages_stay_on_tty1][here]])
TTYVTDisallocate=no
#+end_src
-** TLP
-
-*** langa
-
-#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "langa")) "/sudo::/etc/default/tlp")
-# ------------------------------------------------------------------------------
-# tlp - Parameters for power saving
-# See full explanation: https://linrunner.de/en/tlp/docs/tlp-configuration.html
-
-# Notes:
-# - Some parameters are disabled, remove the leading '#' to enable # them;
-# shown values are suggestions not defaults
-# - Default *: intrinsic default that is effective when the parameter is missing
-# or disabled by a leading '#'; use PARAM="" to disable intrinsic defaults for
-# parameters with text string values
-# - Default <none>: do nothing or use kernel/hardware defaults
-
-# Set to 0 to disable, 1 to enable TLP.
-# Default: 0
-TLP_ENABLE=1
-
-# Operation mode when no power supply can be detected: AC, BAT.
-# Concerns some desktop and embedded hardware only.
-# Default: <none>
-TLP_DEFAULT_MODE=AC
-
-# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
-# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
-# Default: 0
-TLP_PERSISTENT_DEFAULT=0
-
-# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
-# Non-zero value enables, zero disables laptop mode.
-# Default: 0 (AC), 2 (BAT)
-DISK_IDLE_SECS_ON_AC=0
-DISK_IDLE_SECS_ON_BAT=2
-
-# Dirty page values (timeouts in secs).
-# Default: 15 (AC + BAT)
-MAX_LOST_WORK_SECS_ON_AC=15
-MAX_LOST_WORK_SECS_ON_BAT=60
-
-# Note: CPU parameters below are disabled by default, remove the leading #
-# to enable them, otherwise kernel defaults will be used.
-
-# Select a CPU frequency scaling governor.
-# Intel Core i processor with intel_pstate driver:
-# powersave(*), performance.
-# Older hardware with acpi-cpufreq driver:
-# ondemand(*), powersave, performance, conservative, schedutil.
-# (*) is recommended.
-# Use tlp-stat -p to show the active driver and available governors.
-# Important:
-# powersave for intel_pstate and ondemand for acpi-cpufreq are power
-# efficient for *almost all* workloads and therefore kernel and most
-# distributions have chosen them as defaults. If you still want to change,
-# you should know what you're doing! You *must* disable your distribution's
-# governor settings or conflicts will occur.
-# Default: <none>
-#CPU_SCALING_GOVERNOR_ON_AC=powersave
-#CPU_SCALING_GOVERNOR_ON_BAT=powersave
-
-# Set the min/max frequency available for the scaling governor.
-# Possible values depend on your CPU. For available frequencies see
-# the output of tlp-stat -p.
-# Default: <none>
-#CPU_SCALING_MIN_FREQ_ON_AC=0
-#CPU_SCALING_MAX_FREQ_ON_AC=0
-#CPU_SCALING_MIN_FREQ_ON_BAT=0
-#CPU_SCALING_MAX_FREQ_ON_BAT=0
-
-# Set energy performance hints (HWP) for Intel P-state governor:
-# performance, balance_performance, default, balance_power, power
-# Values are given in order of increasing power saving.
-# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
-# Default: <none>
-CPU_HWP_ON_AC=balance_performance
-CPU_HWP_ON_BAT=balance_power
-
-# Set Intel P-state performance: 0..100 (%).
-# Limit the max/min P-state to control the power dissipation of the CPU.
-# Values are stated as a percentage of the available performance.
-# Requires an Intel Core i processor with intel_pstate driver.
-# Default: <none>
-#CPU_MIN_PERF_ON_AC=0
-#CPU_MAX_PERF_ON_AC=100
-#CPU_MIN_PERF_ON_BAT=0
-#CPU_MAX_PERF_ON_BAT=30
-
-# Set the CPU "turbo boost" feature: 0=disable, 1=allow
-# Requires an Intel Core i processor.
-# Important:
-# - This may conflict with your distribution's governor settings
-# - A value of 1 does *not* activate boosting, it just allows it
-# Default: <none>
-#CPU_BOOST_ON_AC=1
-#CPU_BOOST_ON_BAT=0
-
-# Minimize number of used CPU cores/hyper-threads under light load conditions:
-# 0=disable, 1=enable.
-# Default: <none>
-SCHED_POWERSAVE_ON_AC=0
-SCHED_POWERSAVE_ON_BAT=1
-
-# Kernel NMI Watchdog:
-# 0=disable (default, saves power), 1=enable (for kernel debugging only).
-# Default: <none>
-NMI_WATCHDOG=0
-
-# Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
-# Frequency voltage pairs are written to:
-# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
-# CAUTION: only use this, if you thoroughly understand what you are doing!
-# Default: <none>.
-#PHC_CONTROLS="F:V F:V F:V F:V"
-
-# Set CPU performance versus energy savings policy:
-# performance, balance-performance, default, balance-power, power.
-# Values are given in order of increasing power saving.
-# Requires kernel module msr and x86_energy_perf_policy from linux-tools.
-# Default: <none>
-ENERGY_PERF_POLICY_ON_AC=performance
-ENERGY_PERF_POLICY_ON_BAT=balance-power
-
-# Disk devices; separate multiple devices with spaces.
-# Devices can be specified by disk ID also (lookup with: tlp diskid).
-# Note: DISK parameters below are effective only when this option is configured.
-# Default: "nvme0n1 sda"
-DISK_DEVICES="sda sdb"
-
-# Disk advanced power management level: 1..254, 255 (max saving, min, off).
-# Levels 1..127 may spin down the disk; 255 allowable on most drives.
-# Separate values for multiple disks with spaces. Use the special value 'keep'
-# to keep the hardware default for the particular disk.
-# Default: <none>
-DISK_APM_LEVEL_ON_AC="254 254"
-DISK_APM_LEVEL_ON_BAT="128 128"
-
-# Hard disk spin down timeout:
-# 0: spin down disabled
-# 1..240: timeouts from 5s to 20min (in units of 5s)
-# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
-# See 'man hdparm' for details.
-# Separate values for multiple disks with spaces. Use the special value 'keep'
-# to keep the hardware default for the particular disk.
-# Default: <none>
-#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
-#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
-
-# Select I/O scheduler for the disk devices.
-# Multi queue (blk-mq) schedulers:
-# mq-deadline(*), none, kyber, bfq
-# Single queue schedulers:
-# deadline(*), cfq, bfq, noop
-# (*) recommended.
-# Separate values for multiple disks with spaces. Use the special value 'keep'
-# to keep the kernel default scheduler for the particular disk.
-# Notes:
-# - Multi queue (blk-mq) may need kernel boot option 'scsi_mod.use_blk_mq=1'
-# and 'modprobe mq-deadline-iosched|kyber|bfq' on kernels < 5.0
-# - Single queue schedulers are legacy now and were removed together with
-# the old block layer in kernel 5.0
-# Default: keep
-#DISK_IOSCHED="mq-deadline mq-deadline"
-
-# AHCI link power management (ALPM) for disk devices:
-# min_power, med_power_with_dipm(*), medium_power, max_performance.
-# (*) Kernel >= 4.15 required, then recommended.
-# Multiple values separated with spaces are tried sequentially until success.
-# Default: <none>
-SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
-SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
-
-# Exclude host devices from AHCI link power management.
-# Separate multiple hosts with spaces.
-# Default: <none>
-#SATA_LINKPWR_BLACKLIST="host1"
-
-# Runtime Power Management for AHCI host and disks devices:
-# on=disable, auto=enable.
-# EXPERIMENTAL ** WARNING: auto may cause system lockups/data loss.
-# Default: <none>
-#AHCI_RUNTIME_PM_ON_AC=on
-#AHCI_RUNTIME_PM_ON_BAT=on
-
-# Seconds of inactivity before disk is suspended.
-# Note: effective only when AHCI_RUNTIME_PM_ON_AC/BAT is activated.
-# Default: 15
-AHCI_RUNTIME_PM_TIMEOUT=15
-
-# PCI Express Active State Power Management (PCIe ASPM):
-# default(*), performance, powersave.
-# (*) keeps BIOS ASPM defaults (recommended)
-# Default: <none>
-#PCIE_ASPM_ON_AC=default
-#PCIE_ASPM_ON_BAT=default
-
-# Set the min/max/turbo frequency for the Intel GPU.
-# Possible values depend on your hardware. For available frequencies see
-# the output of tlp-stat -g.
-# Default: <none>
-#INTEL_GPU_MIN_FREQ_ON_AC=0
-#INTEL_GPU_MIN_FREQ_ON_BAT=0
-#INTEL_GPU_MAX_FREQ_ON_AC=0
-#INTEL_GPU_MAX_FREQ_ON_BAT=0
-#INTEL_GPU_BOOST_FREQ_ON_AC=0
-#INTEL_GPU_BOOST_FREQ_ON_BAT=0
-
-# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
-# auto = mid on BAT, high on AC.
-# Default: default
-RADEON_POWER_PROFILE_ON_AC=default
-RADEON_POWER_PROFILE_ON_BAT=default
-
-# Radeon dynamic power management method (DPM): battery, performance.
-# Default: <none>
-RADEON_DPM_STATE_ON_AC=performance
-RADEON_DPM_STATE_ON_BAT=battery
-
-# Radeon DPM performance level: auto, low, high; auto is recommended.
-# Note: effective only when RADEON_DPM_STATE_ON_AC/BAT is activated.
-# Default: auto
-RADEON_DPM_PERF_LEVEL_ON_AC=auto
-RADEON_DPM_PERF_LEVEL_ON_BAT=auto
-
-# WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
-# Default: <none>
-WIFI_PWR_ON_AC=off
-WIFI_PWR_ON_BAT=on
-
-# Disable wake on LAN: Y/N.
-# Default: N
-WOL_DISABLE=Y
-
-# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
-# A value of 0 disables, >=1 enables power saving (recommended: 1).
-# Default: <none>
-SOUND_POWER_SAVE_ON_AC=0
-SOUND_POWER_SAVE_ON_BAT=0
-
-# Disable controller too (HDA only): Y/N.
-# Note: effective only when SOUND_POWER_SAVE_ON_AC/BAT is activated.
-# Default: Y
-SOUND_POWER_SAVE_CONTROLLER=N
-
-# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
-# Drive can be powered on again by releasing (and reinserting) the eject lever
-# or by pressing the disc eject button on newer models.
-# Note: an UltraBay/MediaBay hard disk is never powered off.
-# Default: 0
-BAY_POWEROFF_ON_AC=0
-BAY_POWEROFF_ON_BAT=0
-# Optical drive device to power off
-# Default: sr0
-BAY_DEVICE="sr0"
-
-# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
-# Default: <none>
-RUNTIME_PM_ON_AC=on
-RUNTIME_PM_ON_BAT=auto
+* TLP
-# Exclude PCI(e) device adresses the following list from Runtime PM
-# (separate with spaces). Use lspci to get the adresses (1st column).
-# Default: <none>
-#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
-
-# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
-# Default when unconfigured is "amdgpu nouveau nvidia radeon" which
-# prevents accidential power-on of dGPU in hybrid graphics setups.
-# Separate multiple drivers with spaces.
-# Default: "amdgpu mei_me nouveau nvidia pcieport radeon", use "" to disable
-# completely.
-#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu mei_me nouveau nvidia pcieport radeon"
-
-# Set to 0 to disable, 1 to enable USB autosuspend feature.
-# Default: 0
-USB_AUTOSUSPEND=1
-
-# Exclude listed devices from USB autosuspend (separate with spaces).
-# Use lsusb to get the ids.
-# Note: input devices (usbhid) are excluded automatically
-# Default: <none>
-#USB_BLACKLIST="1111:2222 3333:4444"
-
-# Bluetooth devices are excluded from USB autosuspend:
-# 0=do not exclude, 1=exclude.
-# Default: 0
-USB_BLACKLIST_BTUSB=0
-
-# Phone devices are excluded from USB autosuspend:
-# 0=do not exclude, 1=exclude (enable charging).
-# Default: 0
-USB_BLACKLIST_PHONE=0
-
-# Printers are excluded from USB autosuspend:
-# 0=do not exclude, 1=exclude.
-# Default: 1
-USB_BLACKLIST_PRINTER=1
-
-# WWAN devices are excluded from USB autosuspend:
-# 0=do not exclude, 1=exclude.
-# Default: 0
-USB_BLACKLIST_WWAN=0
-
-# Include listed devices into USB autosuspend even if already excluded
-# by the blacklists above (separate with spaces). Use lsusb to get the ids.
-# Default: <none>
-#USB_WHITELIST="1111:2222 3333:4444"
-
-# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
-# (workaround for USB devices that cause shutdown problems).
-# Default: 0
-#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
-
-# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
-# on system startup: 0=disable, 1=enable.
-# Note: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
-# are ignored when this is enabled.
-# Default: 0
-#RESTORE_DEVICE_STATE_ON_STARTUP=0
-RESTORE_DEVICE_STATE_ON_STARTUP=1
-
-# Radio devices to disable on startup: bluetooth, wifi, wwan.
-# Separate multiple devices with spaces.
-# Default: <none>
-#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
-
-# Radio devices to enable on startup: bluetooth, wifi, wwan.
-# Separate multiple devices with spaces.
-# Default: <none>
-#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
-
-# Radio devices to disable on shutdown: bluetooth, wifi, wwan.
-# (workaround for devices that are blocking shutdown).
-# Default: <none>
-#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
-
-# Radio devices to enable on shutdown: bluetooth, wifi, wwan.
-# (to prevent other operating systems from missing radios).
-# Default: <none>
-#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
-
-# Radio devices to enable on AC: bluetooth, wifi, wwan.
-# Default: <none>
-#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
-
-# Radio devices to disable on battery: bluetooth, wifi, wwan.
-# Default: <none>
-#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
-DEVICES_TO_DISABLE_ON_BAT="bluetooth"
-
-# Radio devices to disable on battery when not in use (not connected):
-# bluetooth, wifi, wwan.
-# Default: <none>
-#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
-
-# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
-# required). Charging starts when the remaining capacity falls below the
-# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
-# Main / Internal battery (values in %)
-# Default: <none>
-#START_CHARGE_THRESH_BAT0=75
-#STOP_CHARGE_THRESH_BAT0=80
-# Ultrabay / Slice / Replaceable battery (values in %)
-# Default: <none>
-#START_CHARGE_THRESH_BAT1=75
-#STOP_CHARGE_THRESH_BAT1=80
-
-# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
-# Default: 0
-#RESTORE_THRESHOLDS_ON_BAT=1
-
-# Battery feature drivers: 0=disable, 1=enable
-# Default: 1 (all)
-NATACPI_ENABLE=1
-TPACPI_ENABLE=1
-TPSMAPI_ENABLE=1
+*** darrud
-# ------------------------------------------------------------------------------
-# tlp-rdw - Parameters for the radio device wizard
-# Possible devices: bluetooth, wifi, wwan.
-
-# Notes:
-# - Parameters are disabled by default, remove the leading # to enable them
-# - Separate multiple radio devices with spaces
-
-# Default: <none> (for all parameters below)
-
-# Radio devices to disable on connect.
-#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
-#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
-#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
-
-# Radio devices to enable on disconnect.
-#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
-#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
-#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
-
-# Radio devices to enable/disable when docked.
-#DEVICES_TO_ENABLE_ON_DOCK=""
-#DEVICES_TO_DISABLE_ON_DOCK=""
-
-# Radio devices to enable/disable when undocked.
-#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
-#DEVICES_TO_DISABLE_ON_UNDOCK=""
-#+end_src
-
-*** shemshak
-
-#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "shemshak")) "/sudo::/etc/default/tlp")
+#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "darrud")) "/sudo::/etc/default/tlp")
# ------------------------------------------------------------------------------
# tlp - Parameters for power saving
# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
# governor settings or conflicts will occur.
#CPU_SCALING_GOVERNOR_ON_AC=powersave
#CPU_SCALING_GOVERNOR_ON_BAT=powersave
+CPU_SCALING_GOVERNOR_ON_AC=conservative
+CPU_SCALING_GOVERNOR_ON_BAT=conservative
# Set the min/max frequency available for the scaling governor.
# Possible values strongly depend on your CPU. For available frequencies see
#DEVICES_TO_DISABLE_ON_UNDOCK=""
#+end_src
-** X
-
-*** xprofile
-:PROPERTIES:
-:header-args+: :tangle ~/.xprofile
-:END:
-
-=~/.xprofile= is similar in style to =~/.xinitrc=, but on the
-contrary, it's automatically sourced by LightDM, my display manager of
-choice.
-
-#+begin_src sh :tangle no
-xset -b # disable bell
-xset r rate 200 45 # repeat delay (ms) and rate (repeats/sec)
-
-# setxkbmap -option compose:ralt
-
-setxkbmap -option ctrl:nocaps # turn capslock into control
-setxkbmap -option altwin:swap_alt_win # swap alt and super
-
-if [ $(hostname) = "plasma" ]
-then
- setxkbmap -option ctrl:rctrl_ralt # turn right control into right alt
-fi
-
-if [ $(hostname) = "enigma" ]
-then
- xmodmap -e "keycode 135 = Alt_R" # remap menu key to alt
-fi
-
-light -Scrs "intel_backlight" 2
-
-source $HOME/.zprofile
-
-export _JAVA_AWT_WM_NONREPARENTING=1
-export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
-
-if [ $(hostname) = "plasma" ]
-then
- unlock-def-gk.py &
-fi
-
-bspwm &
-#+end_src
-
-*** xkb us_ab keyboard layout
-
-#+begin_src conf :tangle "/sudo::/usr/share/X11/xkb/symbols/us_ab" :comments none
-default partial alphanumeric_keys
-xkb_symbols "us_ab" {
- include "us(basic)"
- name[Group1]= "English (US)(aminb)";
-
- key <MENU> { [ Alt_R ] };
-};
-#+end_src
-
projects / ~bandali / configs / blobdiff