#+title: rc.org
-#+property: header-args :comments link :mkdirp yes :results silent
+#+property: header-args :comments no :mkdirp yes :results silent
-* About
+This file contains some of the system-level (global) configuration
+files for various programs I use.
-This org file contains the configuration files of pretty much every
-program I use. The files are tangled (i.e. exported, or derived) from
-this file using =org-babel=.
+* systemd
-Note: This file is best viewed inside Emacs with org mode.
+Keep boot messages on tty1 (see [[https://wiki.archlinux.org/index.php/getty#Have_boot_messages_stay_on_tty1][here]])
-* Configs
-
-This section contains the configuration files (dotfiles) of various
-programs I use.
-
-** [[https://github.com/afewmail/afew][afew]]
-:PROPERTIES:
-:header-args+: :tangle ~/.config/afew/config
-:END:
-
-#+begin_quote
-an initial tagging script for notmuch mail
-#+end_quote
-
-#+begin_src conf
-# This is the default filter chain
-[SpamFilter]
-#[ClassifyingFilter]
-[KillThreadsFilter]
-#[ListMailsFilter]
-[ArchiveSentMailsFilter]
-sent_tag = sent
-[InboxFilter]
-
-#[Filter.1]
-#query = 'folder:amin/lists/.haskell-cafe'
-#tags = +lists;+lists/haskell-cafe
-#message = lists/haskell-cafe
-
-#[Filter.2]
-#query = 'folder:amin/lists/.haskell-weekly'
-#tags = +lists;+lists/haskell-weekly
-#message = lists/haskell-weekly
-
-#[Filter.3]
-#query = 'folder:amin/lists/.hackernewsletter'
-#tags = +lists;+lists/hackernewsletter
-#message = lists/hackernewsletter
-
-
-#[FolderNameFilter]
-#folder_blacklist = Inbox
-#maildir_separator = /.
-#folder_transforms = Drafts:draft Junk:spam Trash:deleted Sent:sent Archive:archive lists/haskell-cafe:lists/haskell-cafe
-#+end_src
-
-** bspwm
-
-*** bspwmrc
-:PROPERTIES:
-:header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
-:END:
-
-#+begin_src sh
-sxhkd &
-sh ~/.fehbg &
-xfce4-panel -d &
-#compton &
-sleep 0.5 && pasystray --notify=all &
-
-bspc monitor -d I II III IV V VI VII VIII IX X
-#bspc monitor eDP-1 -d I II III IV V
-#bspc monitor HDMI-1 -d VI VII VIII IX X
-
-#bspc config border_width 2
-#bspc config window_gap 8
-bspc config window_gap 0
-
-bspc config bottom_padding 26
-
-bspc config split_ratio 0.52
-bspc config borderless_monocle true
-bspc config gapless_monocle true
-bspc config click_to_focus button1
-bspc config directional_focus_tightness low
-
-bspc rule -a Firefox desktop='^1' follow=on
-bspc rule -a Nightly desktop='^1' follow=on
-bspc rule -a Emacs desktop='^2' state=tiled follow=on
-#bspc rule -a Chromium desktop='^4' follow=on
-bspc rule -a URxvt state=floating
-bspc rule -a URxvt:tiled state=tiled
-bspc rule -a Connman-gtk state=floating
-bspc rule -a Xfce4-panel state=floating
-bspc rule -a TelegramDesktop state=floating
-bspc rule -a Ec state=floating
-bspc rule -a Pavucontrol state=floating
-bspc rule -a Eog state=floating
-bspc rule -a Seahorse state=floating
-bspc rule -a mpv state=floating
-bspc rule -a Evince state=floating
-bspc rule -a Meld state=floating
-bspc rule -a Autokey-gtk state=floating
-bspc rule -a Mousepad state=floating
-bspc rule -a Wrapper-1.0 state=floating
-bspc rule -a File-roller state=floating
-bspc rule -a Gnome-disks state=floating
-bspc rule -a Termite state=floating
-bspc rule -a Termite:tiled state=tiled
-bspc rule -a Thunderbird:Calendar state=floating
-bspc rule -a Audacity state=floating
-bspc rule -a Proof state=floating # pvs x-show-proof
-bspc rule -a Nm-connection-editor state=floating
-bspc rule -a Wire state=floating
-bspc rule -a discord state=floating
-bspc rule -a X2goclient state=floating
-bspc rule -a SimpleScreenRecorder state=floating
-bspc rule -a Gimp state=floating
-bspc rule -a Wrapper-2.0 state=floating
-bspc rule -a Zathura state=tiled
-#+end_src
-
-*** sxhkdrc
-:PROPERTIES:
-:header-args+: :tangle ~/.config/sxhkd/sxhkdrc
-:END:
-
-#+begin_src conf
-#
-# wm independent hotkeys
-#
-
-# terminal emulator
-super + {_,shift} + Return
- urxvt{_, -name tiled}
-
-#super + {_,shift} + Return
-# termite{_, --name=tiled}
-
-# program launcher
-super + space
- rofi -show run -display-run '> ' -display-window ' 🗔 '
-
-super + alt + space
- xfce4-popup-whiskermenu
-
-# window finder
-super + backslash
- rofi -show window -display-run '> ' -display-window ' 🗔 '
-
-# password manager
-alt + space
- rofi-pass
-
-# firefox
-#super + r
-# firefox
-
-# chromium
-#super + c
-# chromium -incognito
-
-# emacs
-super + e
- emacs
-
-# make sxhkd reload its configuration files:
-super + Escape
- pkill -USR1 -x sxhkd
-
-# volume {up,down}
-XF86Audio{Raise,Lower}Volume
- pamixer --allow-boost --{in,de}crease 5
-
-# mute
-XF86AudioMute
- pamixer --toggle-mute
-
-# playback control
-XF86Audio{Play,Prev,Next}
- mpc {toggle,prev,next}
-
-# lock the screen
-super + shift + q
- light-locker-command -l
-
-# Toggle keyboard layout
-super + F7
- toggle-layout
-
-# Toggle Xfce presentation mode
-XF86LaunchB
- toggle-presentation-mode
-
-# monitor brightness
-XF86MonBrightness{Up,Down}
- light -{A,U} 5
-
-super + apostrophe
- rofi-light
-
-# keyboard brightness
-#XF86KbdBrightness{Up,Down}
-# kbdlight {up,down}
-
-#
-# bspwm hotkeys
-#
-
-# quit bspwm normally
-super + alt + Escape
- bspc quit
-
-# close and kill
-super + {w,q}
- bspc node -{c,k}
-
-# alternate between the tiled and monocle layout
-super + m
- bspc desktop -l next
-
-# send the newest marked node to the newest preselected node
-super + y
- bspc node newest.marked.local -n newest.!automatic.local
-
-# swap the current node and the biggest node
-super + g
- bspc node -s biggest
-
-#
-# state/flags
-#
-
-# set the window state
-super + {t,shift + t,s,f}
- bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
-
-# set the node flags
-super + ctrl + {m,x,y,z}
- bspc node -g {marked,locked,sticky,private}
-
-#
-# focus/swap
-#
-
-# focus the node in the given direction
-super + {_,shift + }{h,j,k,l}
- bspc node -{f,s} {west,south,north,east}
-
-# focus the node for the given path jump
-super + {p,b,comma,period}
- bspc node -f @{parent,brother,first,second}
-
-# focus the next/previous node in the current desktop
-super + {_,shift + }c
- bspc node -f {next,prev}.local
-
-# focus the next/previous desktop in the current monitor
-super + bracket{left,right}
- bspc desktop -f {prev,next}.local
-
-# send to next/prev desktop
-super + shift + bracket{left,right}
- bspc node -d {prev,next} --follow
-
-# focus the last node/desktop
-super + {grave,Tab}
- bspc {node,desktop} -f last
-
-# focus the older or newer node in the focus history
-super + {o,i}
- bspc wm -h off; \
- bspc node {older,newer} -f; \
- bspc wm -h on
-
-# focus or send to the given desktop
-super + {_,shift + }{1-9,0}
- bspc {desktop -f,node -d} '^{1-9,10}'
-
-#
-# preselect
-#
-
-# preselect the direction
-super + ctrl + {h,j,k,l}
- bspc node -p {west,south,north,east}
-
-# preselect the ratio
-super + ctrl + {1-9}
- bspc node -o 0.{1-9}
-
-# cancel the preselection for the focused node
-super + ctrl + space
- bspc node -p cancel
-
-# cancel the preselection for the focused desktop
-super + ctrl + shift + space
- bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
-
-#
-# move/resize
-#
-
-# expand a window by moving one of its side outward
-super + alt + {h,j,k,l}
- bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
-
-# contract a window by moving one of its side inward
-super + alt + shift + {h,j,k,l}
- bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
-
-# move a floating window
-super + {Left,Down,Up,Right}
- bspc node -v {-20 0,0 20,0 -20,20 0}
-
-#alt + bracket{left,right}
-# xdotool key --clearmodifiers ctrl+Page_{Up,Down}
-#+end_src
-
-** compton
-:PROPERTIES:
-:header-args+: :tangle ~/.config/compton.conf
-:END:
-
-#+begin_src conf
-# Shadow
-shadow = false; # Enabled client-side shadows on windows.
-no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows.
-no-dnd-shadow = true; # Don't draw shadows on DND windows.
-clear-shadow = true; # Zero the part of the shadow's mask behind the
- # window. Fix some weirdness with ARGB windows.
-shadow-radius = 5; # The blur radius for shadows. (default 12)
-shadow-offset-x = -5; # The left offset for shadows. (default -15)
-shadow-offset-y = -5; # The top offset for shadows. (default -15)
-# shadow-opacity = 0.7; # The translucency for shadows. (default .75)
-# shadow-red = 0.0; # Red color value of shadow. (0.0 - 1.0, defaults to 0)
-# shadow-green = 0.0; # Green color value of shadow. (0.0 - 1.0, defaults to 0)
-# shadow-blue = 0.0; # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
-shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ]; # Exclude conditions for shadows.
-# shadow-exclude = "n:e:Notification";
-#shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
-shadow-ignore-shaped = true; # Avoid drawing shadow on all shaped windows
- # (see also: --detect-rounded-corners)
-
-# Opacity
-menu-opacity = 1.0; # The opacity for menus. (default 1.0)
-#inactive-opacity = 0.9; # Default opacity of inactive windows. (0.0 - 1.0)
-# active-opacity = 0.8; # Default opacity for active windows. (0.0 - 1.0)
-frame-opacity = 1.0; # Opacity of window titlebars and borders. (0.1 - 1.0)
-# inactive-opacity-override = true; # Let inactive opacity set by 'inactive-opacity' overrides
- # value of _NET_WM_OPACITY. Bad choice.
-alpha-step = 0.06; # XRender backend: Step size for alpha pictures. Increasing
- # it may result in less X resource usage,
- # Yet fading may look bad.
-#inactive-dim = 0.5; # Dim inactive windows. (0.0 - 1.0)
-#inactive-dim-fixed = true; # Do not let dimness adjust based on window opacity.
-# blur-background = true; # Blur background of transparent windows.
- # Bad performance with X Render backend.
- # GLX backend is preferred.
-# blur-background-frame = true; # Blur background of opaque windows with transparent
- # frames as well.
-blur-background-fixed = true; # Do not let blur radius adjust based on window opacity.
-blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
- # Exclude conditions for background blur.
-
-# Fading
-fading = false; # Fade windows during opacity changes.
-fade-delta = 3; # The time between steps in a fade in milliseconds. (default 10).
-fade-in-step = 0.03; # Opacity change between steps while fading in. (default 0.028).
-fade-out-step = 0.03; # Opacity change between steps while fading out. (default 0.03).
-# no-fading-openclose = true; # Avoid fade windows in/out when opening/closing.
-fade-exclude = [ ]; # Exclude conditions for fading.
-
-# Other
-backend = "glx" # Backend to use: "xrender" or "glx". GLX backend is typically
- # much faster but depends on a sane driver.
-mark-wmwin-focused = true; # Try to detect WM windows and mark them as active.
-mark-ovredir-focused = true; # Mark all non-WM but override-redirect windows active (e.g. menus).
-use-ewmh-active-win = true; # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
- # instead of using FocusIn/Out events. Usually more reliable but
- # depends on a EWMH-compliant WM.
-detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
-detect-client-opacity = true; # Detect _NET_WM_OPACITY on client windows, useful for window
- # managers not passing _NET_WM_OPACITY of client windows to frame
- # windows.
-refresh-rate = 0; # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
-vsync = "drm"; # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
- # See man page for more details.
-dbe = false; # Enable DBE painting mode. Rarely needed.
-paint-on-overlay = true; # Painting on X Composite overlay window. Recommended.
-sw-opti = false; # Limit compton to repaint at most once every 1 / refresh_rate.
- # Incompatible with certain VSync methods.
-unredir-if-possible = false; # Unredirect all windows if a full-screen opaque window is
- # detected, to maximize performance for full-screen windows.
-focus-exclude = [ ]; # A list of conditions of windows that should always be considered
- # focused.
-detect-transient = true; # Use WM_TRANSIENT_FOR to group windows, and consider windows in
- # the same group focused at the same time.
-detect-client-leader = true; # Use WM_CLIENT_LEADER to group windows.
-invert-color-include = [ ]; # Conditions for windows to be painted with inverted color.
-
-# GLX backend # GLX backend fine-tune options. See man page for more info.
-glx-no-stencil = true; # Recommended.
-glx-copy-from-front = false; # Useful with --glx-swap-method,
-# glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
-# glx-no-rebind-pixmap = true; # Recommended if it works.
-glx-no-rebind-pixmap = true; # Recommended if it works.
-#glx-swap-method = "4"; # See man page.
-glx-swap-method = "4"; # See man page.
-
-# Window type settings
-wintypes:
-{
- tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
- menu = { shadow = false; };
- dropdown_menu = { shadow = false; };
- popup_menu = { shadow = false; };
- utility = { shadow = false; };
- # fade: Fade the particular type of windows.
- # shadow: Give those windows shadow
- # opacity: Default opacity for the type of windows.
- # focus: Whether to always consider windows of this type focused.
-};
-#+end_src
-
-** Dunst
-:PROPERTIES:
-:header-args+: :tangle ~/.config/dunst/dunstrc
-:END:
-
-#+begin_src conf
-[global]
-#font = Ubuntu Mono 10.5
-font = Inconsolata 11
-
-# Path to default icons.
-icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
-
-icon_position = left
-# <b>bold</b>
-# <i>italic</i>
-# <s>strikethrough<s/>
-# <u>underline</u>
-markup = full
-# The format of the message. Possible variables are:
-# %a appname
-# %s summary
-# %b body
-# %i iconname (including its path)
-# %I iconname (without its path)
-# %p progress value if set ([ 0%] to [100%]) or nothing
-# Markup is allowed
-format = "<b>%s</b>\n%b"
-# Sort messages by urgency
-sort = yes
-# Show how many messages are currently hidden (because of geometry)
-indicate_hiddenl= no
-# Alignment of message text.
-# Possible values are "left", "center" and "right"
-alignment = center
-# The frequency with wich text that is longer than the notification
-# window allows bounces back and forth.
-# This option conflicts with 'word_wrap'.
-# Set to 0 to disable
-bounce_freq = 3
-# show age of message if message is older than show_age_threshold seconds.
-# set to -1 to disable
-show_age_threshold = -1
-# split notifications into multiple lines if they don't fit into geometry
-word_wrap = yes
-# ignore newlines '\n' in notifications
-ignore_newline = no
-# The geometry of the message window.
-# geometry [{width}]x{height}][+/-{x}+/-{y}]
-# The height is measured in number of notifications everything else in pixels. If the width
-# is omitted but the height is given ("-geometry x2"), the message window
-# expands over the whole screen (dmenu-like). If width is 0,
-# the window expands to the longest message displayed.
-# A positive x is measured from the left, a negative from the
-# right side of the screen. Y is measured from the top and down respectevly.
-# The width can be negative. In this case the actual width is the
-# screen width minus the width defined in within the geometry option.
-#geometry = "410x12-12+12"
-#geometry = "0x0-30-30"
-geometry = "260x12-30-30"
-# The transparency of the window. range: [0; 100]
-# This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
-transparency = 0
-# Don't remove messages, if the user is idle (no mouse or keyboard input)
-# for longer than idle_threshold seconds.
-# Set to 0 to disable.
-idle_threshold = 120
-# Which monitor should the notifications be displayed on.
-monitor = 0
-# Display notification on focused monitor. Possible modes are:
-# mouse: follow mouse pointer
-# keyboard: follow window with keyboard focus
-# none: don't follow anything
-#
-# "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
-# This should be the case for almost all modern windowmanagers.
-#
-# If this option is set to mouse or keyboard, the monitor option will be
-# ignored.
-follow = keyboard
-# should a notification popped up from history be sticky or
-# timeout as if it would normally do.
-sticky_history = yes
-# The height of a single line. If the height is smaller than the font height,
-# it will get raised to the font height.
-# This adds empty space above and under the text.
-line_height = 0
-
-show_indicators = yes
-
-# Draw a line of 'separatpr_height' pixel height between two notifications.
-# Set to 0 to disable
-separator_height = 3
-# padding between text and separator
-padding = 8
-# horizontal padding
-horizontal_padding = 8
-# Define a color for the separator.
-# possible values are:
-# * auto: dunst tries to find a color fitting to the background
-# * foreground: use the same color as the foreground
-# * frame: use the same color as the frame.
-# * anything else will be interpreted as a X color
-separator_color = foreground
-# print a notification on startup
-# This is mainly for error detection, since dbus (re-)starts dunst
-# automatically after a crash.
-startup_notification = false
-# dmenu path
-#dmenu = /usr/bin/dmenu -p dunst:
-dmenu = /usr/bin/rofi -dmenu -p dunst:
-# browser for opening urls in context menu
-browser = /usr/bin/firefox -new-tab
-[frame]
-width = 0
-color = "#377222"
-[shortcuts]
-# shortcuts are specified as [modifier+][modifier+]...key
-# available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
-# and 'mod4' (windows-key)
-# xev might be helpful to find names for keys
-# close notification
-close = ctrl+space
-# close all notifications
-close_all = ctrl+shift+space
-# redisplay last message(s)
-# On the US keyboard layout 'grave' is normally above TAB and left of '1'.
-history = ctrl+shift+h
-# context menu
-context = ctrl+shift+period
-[urgency_low]
-# IMPORTANT: colors have to be defined in quotation marks.
-# Otherwise the '#' and following would be interpreted as a comment.
-background = "#1d2a30"
-foreground = "#71c2af"
-timeout = 3
-[urgency_normal]
-background = "#1d2a30"
-foreground = "#71c2af"
-timeout = 0
-[urgency_critical]
-background = "#1d2a30"
-foreground = "#ff9982"
-timeout = 0
-
-# Every section that isn't one of the above is interpreted as a rules
-# to override settings for certain messages.
-# Messages can be matched by 'appname', 'summary', 'body' or 'icon'
-# and you can override the 'timeout', 'urgency', 'foreground', 'background'
-# and 'format'.
-# Shell-like globbing will get expanded.
-#
-# SCRIPTING
-# you can specify a script that gets run when the rule matches by setting
-# the 'script' option.
-# The script will be called as follows:
-# script appname summary body icon urgency
-# where urgency can be "LOW", "NORMAL" or "CRITICAL".
-#
-# NOTE: if you don't want a notification to be displayed, set the format to ""
-# NOTE: It might be helpful to run dunst -print in a terminal in order to find
-# fitting options for rules.
-#[espeak]
-# summary = "*"
-# script = dunst_espeak.sh
-#[script-test]
-# summary = "*script*"
-# script = dunst_test.sh
-#[ignore]
-## This notification will not be displayed
-# summary = "foobar"
-# format = ""
-#[signed_on]
-# appname = Pidgin
-# summary = "*signed on*"
-# urgency = low
-#
-#[signed_off]
-# appname = Pidgin
-# summary = *signed off*
-# urgency = low
-#
-#[says]
-# appname = Pidgin
-# summary = *says*
-# urgency = critical
-#
-#[twitter]
-# appname = Pidgin
-# summary = *twitter.com*
-# urgency = normal
-#
-[xfpm-backlight]
- summary = *Brightness*
- urgency = low
-#+end_src
-
-** Fontconfig
-:PROPERTIES:
-:header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
-:END:
-
-#+begin_src xml
-<?xml version="1.0"?>
-<!DOCTYPE fontconfig SYSTEM "fonts.dtd">
-<fontconfig>
- <match target="font">
- <edit mode="assign" name="rgba">
- <const>rgb</const>
- </edit>
- </match>
- <match target="font">
- <edit mode="assign" name="hinting">
- <bool>true</bool>
- </edit>
- </match>
- <match target="font">
- <edit mode="assign" name="hintstyle">
- <const>hintslight</const>
- </edit>
- </match>
- <match target="font">
- <edit mode="assign" name="antialias">
- <bool>true</bool>
- </edit>
- </match>
- <match target="font">
- <edit mode="assign" name="lcdfilter">
- <const>lcddefault</const>
- </edit>
- </match>
- <dir>~/.fonts</dir>
-
- <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
- <alias binding="same">
- <family>Helvetica</family>
- <accept>
- <family>Liberation Sans</family>
- </accept>
-</alias>
-</fontconfig>
-#+end_src
-
-** Git
-
-*** gitconfig
-:PROPERTIES:
-:header-args+: :tangle ~/.gitconfig
-:END:
-
-**** user
-#+begin_src conf
-[user]
- name = Amin Bandali
- email = amin@aminb.org
- # signingkey = 4E05246AB0BF7FFB
-#+end_src
-
-**** signing
-#+begin_src conf
-# [commit]
-# gpgsign = true
-# [format]
-# signoff = true
-#+end_src
-
-**** core
-#+begin_src conf
-[core]
- autocrlf = input # CRLF -> LF on commit
- editor = emacsclient -t
- excludesfile = ~/.gitignore_global
- pager = "less"
-#+end_src
-
-**** gpg
-#+begin_src conf
-[gpg]
- program = gpg2
-#+end_src
-
-**** alias
-#+begin_src conf
-[alias]
- git = !exec git # handle nested git calls, e.g. git git status
- aliases = config --get-regexp '^alias\\.'
- a = add
- s = status
- sl = status --long
- c = checkout
- cb = checkout -b
- b = branch
- r = rebase
- p = pull
- pr = pull --rebase
- ps = push
- psf = push --force
-#+end_src
-
-**** color
-#+begin_src conf
-[color]
- ui = auto
-[color "status"]
- added = green bold
- changed = red bold
- untracked = red bold
-[color "branch"]
- current = green bold
- remote = magenta bold
-[color "diff"]
- new = green bold
- old = red bold
-#+end_src
-
-**** status
-#+begin_src conf
-[status]
- # showUntrackedFiles = all
- short=true
- branch=true
-#+end_src
-
-**** github
-#+begin_src conf
-[github]
- user = aminb
-#+end_src
-
-*** gitignore
-:PROPERTIES:
-:header-args+: :tangle ~/.gitignore_global
-:END:
-
-#+begin_src conf
-*.orig
-*.py[co]
-*.sublime-workspace
-*~
-.DS_Store
-*.elc
-*-autoloads.el
-#+end_src
-
-** Latexmk
-:PROPERTIES:
-:header-args+: :tangle ~/.latexmkrc
-:END:
-
-#+begin_src conf
-$pdf_previewer = "start zathura %O %S";
-$clean_ext = "aux out";
-
-# $pdf_update_method = 4;
-# $pdf_update_command = "zathura %O %S";
-
-# Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
-# by Ctrl+click in the PDF.
-# Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
-# editor.
-# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
-#+end_src
-
-** libinput
-
-Improve XPS 15 9560's touchpad experience.
-
-#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
-Section "InputClass"
- Identifier "libinput touchpad catchall"
- Driver "libinput"
- MatchIsTouchpad "on"
- Option "ClickMethod" "clickfinger"
- Option "NaturalScrolling" "true"
- Option "Tapping" "on"
- Option "TappingButtonMap" "lrm"
-EndSection
-#+end_src
-
-** getmail
-
-*** getmailrc
-:PROPERTIES:
-:header-args+: :tangle ~/.getmail/getmailrc
-:END:
-
-#+begin_src conf
-[retriever]
-type = SimplePOP3SSLRetriever
-server = fencepost.gnu.org
-username = aminb
-password_command = ("gpg2", "--no-tty", "-q", "-d", "~/.passwd/gnu.gpg")
-port = 995
-use_apop = True
-
-[destination]
-type = Maildir
-path = ~/mail/gnu/Inbox/
-
-[options]
-delete = True
-#+end_src
-
-*** getmail.service
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/getmail.service
-:END:
-
-#+begin_src conf :tangle no
-[Unit]
-Description=getmail service
-
-[Service]
-Type=oneshot
-ExecStart=/usr/bin/getmail
-StandardOutput=syslog
-StandardError=syslog
-#+end_src
-
-*** getmail.timer
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/getmail.timer
-:END:
-
-#+begin_src conf :tangle no
-[Unit]
-Description=getmail timer
-
-[Timer]
-OnCalendar=*:0/30
-Persistent=true
-Unit=getmail.service
-
-[Install]
-WantedBy=timers.target
-#+end_src
-
-** GnuPG
-:PROPERTIES:
-:header-args+: :tangle ~/.gnupg/gpg-agent.conf
-:END:
-
-#+begin_src conf
-default-cache-ttl 43200
-max-cache-ttl 43200
-
-default-cache-ttl-ssh 10800
-max-cache-ttl-ssh 10800
-
-# pinentry-program /usr/bin/pinentry-qt
-#+end_src
-
-** GTK
-
-*** gtk-2.0
-:PROPERTIES:
-:header-args+: :tangle ~/.gtkrc-2.0
-:END:
-
-#+begin_src conf
-gtk-theme-name="Greybird"
-gtk-icon-theme-name="Paper"
-gtk-font-name="Ubuntu 10"
-gtk-menu-images=0
-# gtk-key-theme-name = "Emacs"
-#+end_src
-
-*** gtk-3.0
-:PROPERTIES:
-:header-args+: :tangle ~/.config/gtk-3.0/settings.ini
-:END:
-
-#+begin_src conf :tangle no
-[Settings]
-gtk-icon-theme-name = Paper
-# gtk-theme-name = Adwaita
-
-gtk-theme-name = Greybird
-# gtk-theme-name = Arc-Darker
-# gtk-theme-name = Numix-ArchBlue
-
-gtk-font-name = Ubuntu 10
-# gtk-key-theme-name = Emacs
-#+end_src
-
-** isync
-
-*** mbsyncrc
-:PROPERTIES:
-:header-args+: :tangle ~/.mbsyncrc
-:END:
-
-#+begin_src conf
-# Global defaults
-CopyArrivalDate yes
-
-######
-IMAPAccount amin
-Host nix.aminb.org
-User amin@aminb.org
-PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
-SSLType IMAPS
-
-IMAPStore amin-remote
-Account amin
-
-MaildirStore amin-local
-Path ~/mail/amin/
-Inbox ~/mail/amin/Inbox
-SubFolders Verbatim
-
-Channel amin
-Master :amin-remote:
-Slave :amin-local:
-Patterns * !dovecot*
-Create Both
-SyncState *
-
-######
-IMAPAccount uwaterloo
-Host connect.uwaterloo.ca
-User abandali
-PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
-SSLType IMAPS
-
-IMAPStore uwaterloo-remote
-Account uwaterloo
-
-MaildirStore uwaterloo-local
-Path ~/mail/uwaterloo/
-Inbox ~/mail/uwaterloo/Inbox
-SubFolders Verbatim
-
-Channel uwaterloo
-Master :uwaterloo-remote:
-Slave :uwaterloo-local:
-Patterns * !dovecot*
-Create Both
-SyncState *
-#+end_src
-
-*** mbsync.service
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/mbsync.service
-:END:
-
-#+begin_src conf :tangle no
-[Unit]
-Description=mbsync service
-
-[Service]
-Type=oneshot
-ExecStart=/usr/bin/mbsync -Va
-StandardOutput=syslog
-StandardError=syslog
-#+end_src
-
-*** mbsync.timer
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/mbsync.timer
-:END:
-
-#+begin_src conf :tangle no
-[Unit]
-Description=mbsync timer
-
-[Timer]
-OnCalendar=*:0/15
-Persistent=true
-Unit=mbsync.service
-
-[Install]
-WantedBy=timers.target
-#+end_src
-
-** mpd
-:PROPERTIES:
-:header-args+: :tangle ~/.config/mpd/mpd.conf
-:END:
-
-#+begin_src conf
-# An example configuration file for MPD.
-# Read the user manual for documentation: http://www.musicpd.org/doc/user/
-
-
-# Files and directories #######################################################
-#
-# This setting controls the top directory which MPD will search to discover the
-# available audio files and add them to the daemon's online database. This
-# setting defaults to the XDG directory, otherwise the music directory will be
-# be disabled and audio files will only be accepted over ipc socket (using
-# file:// protocol) or streaming files over an accepted protocol.
-#
-music_directory "~/usr/music"
-#
-# This setting sets the MPD internal playlist directory. The purpose of this
-# directory is storage for playlists created by MPD. The server will use
-# playlist files not created by the server but only if they are in the MPD
-# format. This setting defaults to playlist saving being disabled.
-#
-playlist_directory "~/.mpd/playlists"
-#
-# This setting sets the location of the MPD database. This file is used to
-# load the database at server start up and store the database while the
-# server is not up. This setting defaults to disabled which will allow
-# MPD to accept files over ipc socket (using file:// protocol) or streaming
-# files over an accepted protocol.
-#
-db_file "~/.mpd/database"
-#
-# These settings are the locations for the daemon log files for the daemon.
-# These logs are great for troubleshooting, depending on your log_level
-# settings.
-#
-# The special value "syslog" makes MPD use the local syslog daemon. This
-# setting defaults to logging to syslog, otherwise logging is disabled.
-#
-log_file "~/.mpd/log"
-#
-# This setting sets the location of the file which stores the process ID
-# for use of mpd --kill and some init scripts. This setting is disabled by
-# default and the pid file will not be stored.
-#
-pid_file "~/.mpd/pid"
-#
-# This setting sets the location of the file which contains information about
-# most variables to get MPD back into the same general shape it was in before
-# it was brought down. This setting is disabled by default and the server
-# state will be reset on server start up.
-#
-state_file "~/.mpd/state"
-#
-# The location of the sticker database. This is a database which
-# manages dynamic information attached to songs.
-#
-sticker_file "~/.mpd/sticker.sql"
-#
-###############################################################################
-
-
-# General music daemon options ################################################
-#
-# This setting specifies the user that MPD will run as. MPD should never run as
-# root and you may use this setting to make MPD change its user ID after
-# initialization. This setting is disabled by default and MPD is run as the
-# current user.
-#
-#user "nobody"
-#
-# This setting specifies the group that MPD will run as. If not specified
-# primary group of user specified with "user" setting will be used (if set).
-# This is useful if MPD needs to be a member of group such as "audio" to
-# have permission to use sound card.
-#
-#group "nogroup"
-#
-# This setting sets the address for the daemon to listen on. Careful attention
-# should be paid if this is assigned to anything other then the default, any.
-# This setting can deny access to control of the daemon. Not effective if
-# systemd socket activiation is in use.
-#
-# For network
-#bind_to_address "any"
-#
-# And for Unix Socket
-#bind_to_address "~/.mpd/socket"
-#
-# This setting is the TCP port that is desired for the daemon to get assigned
-# to.
-#
-#port "6600"
-#
-# This setting controls the type of information which is logged. Available
-# setting arguments are "default", "secure" or "verbose". The "verbose" setting
-# argument is recommended for troubleshooting, though can quickly stretch
-# available resources on limited hardware storage.
-#
-#log_level "default"
-#
-# If you have a problem with your MP3s ending abruptly it is recommended that
-# you set this argument to "no" to attempt to fix the problem. If this solves
-# the problem, it is highly recommended to fix the MP3 files with vbrfix
-# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
-# point gapless MP3 playback can be enabled.
-#
-#gapless_mp3_playback "yes"
-#
-# Setting "restore_paused" to "yes" puts MPD into pause mode instead
-# of starting playback after startup.
-#
-#restore_paused "no"
-#
-# This setting enables MPD to create playlists in a format usable by other
-# music players.
-#
-#save_absolute_paths_in_playlists "no"
-#
-# This setting defines a list of tag types that will be extracted during the
-# audio file discovery process. The complete list of possible values can be
-# found in the user manual.
-#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
-#
-# This setting enables automatic update of MPD's database when files in
-# music_directory are changed.
-#
-#auto_update "yes"
-#
-# Limit the depth of the directories being watched, 0 means only watch
-# the music directory itself. There is no limit by default.
-#
-#auto_update_depth "3"
-#
-###############################################################################
-
-
-# Symbolic link behavior ######################################################
-#
-# If this setting is set to "yes", MPD will discover audio files by following
-# symbolic links outside of the configured music_directory.
-#
-#follow_outside_symlinks "yes"
-#
-# If this setting is set to "yes", MPD will discover audio files by following
-# symbolic links inside of the configured music_directory.
-#
-#follow_inside_symlinks "yes"
-#
-###############################################################################
-
-
-# Zeroconf / Avahi Service Discovery ##########################################
-#
-# If this setting is set to "yes", service information will be published with
-# Zeroconf / Avahi.
-#
-#zeroconf_enabled "yes"
-#
-# The argument to this setting will be the Zeroconf / Avahi unique name for
-# this MPD server on the network.
-#
-#zeroconf_name "Music Player"
-#
-###############################################################################
-
-
-# Permissions #################################################################
-#
-# If this setting is set, MPD will require password authorization. The password
-# setting can be specified multiple times for different password profiles.
-#
-#password "password@read,add,control,admin"
-#
-# This setting specifies the permissions a user has who has not yet logged in.
-#
-#default_permissions "read,add,control,admin"
-#
-###############################################################################
-
-
-# Database #######################################################################
-#
-
-#database {
-# plugin "proxy"
-# host "other.mpd.host"
-# port "6600"
-#}
-
-# Input #######################################################################
-#
-
-input {
- plugin "curl"
-# proxy "proxy.isp.com:8080"
-# proxy_user "user"
-# proxy_password "password"
-}
-
-#
-###############################################################################
-
-# Audio Output ################################################################
-#
-
-audio_output {
- type "pulse"
- name "pulse audio"
-}
-
-audio_output {
- type "fifo"
- name "my_fifo"
- path "/tmp/mpd.fifo"
- format "44100:16:2"
-}
-
-# MPD supports various audio output types, as well as playing through multiple
-# audio outputs at the same time, through multiple audio_output settings
-# blocks. Setting this block is optional, though the server will only attempt
-# autodetection for one sound card.
-#
-# An example of an ALSA output:
-#
-#audio_output {
-# type "alsa"
-# name "My ALSA Device"
-## device "hw:0,0" # optional
-## mixer_type "hardware" # optional
-## mixer_device "default" # optional
-## mixer_control "PCM" # optional
-## mixer_index "0" # optional
-#}
-#
-# An example of an OSS output:
-#
-#audio_output {
-# type "oss"
-# name "My OSS Device"
-## device "/dev/dsp" # optional
-## mixer_type "hardware" # optional
-## mixer_device "/dev/mixer" # optional
-## mixer_control "PCM" # optional
-#}
-#
-# An example of a shout output (for streaming to Icecast):
-#
-#audio_output {
-# type "shout"
-# encoder "vorbis" # optional
-# name "My Shout Stream"
-# host "localhost"
-# port "8000"
-# mount "/mpd.ogg"
-# password "hackme"
-# quality "5.0"
-# bitrate "128"
-# format "44100:16:1"
-## protocol "icecast2" # optional
-## user "source" # optional
-## description "My Stream Description" # optional
-## url "http://example.com" # optional
-## genre "jazz" # optional
-## public "no" # optional
-## timeout "2" # optional
-## mixer_type "software" # optional
-#}
-#
-# An example of a recorder output:
-#
-#audio_output {
-# type "recorder"
-# name "My recorder"
-# encoder "vorbis" # optional, vorbis or lame
-# path "/var/lib/mpd/recorder/mpd.ogg"
-## quality "5.0" # do not define if bitrate is defined
-# bitrate "128" # do not define if quality is defined
-# format "44100:16:1"
-#}
-#
-# An example of a httpd output (built-in HTTP streaming server):
-#
-#audio_output {
-# type "httpd"
-# name "My HTTP Stream"
-# encoder "vorbis" # optional, vorbis or lame
-# port "8000"
-# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
-## quality "5.0" # do not define if bitrate is defined
-# bitrate "128" # do not define if quality is defined
-# format "44100:16:1"
-# max_clients "0" # optional 0=no limit
-#}
-#
-# An example of a pulseaudio output (streaming to a remote pulseaudio server)
-#
-#audio_output {
-# type "pulse"
-# name "My Pulse Output"
-## server "remote_server" # optional
-## sink "remote_server_sink" # optional
-#}
-#
-# An example of a winmm output (Windows multimedia API).
-#
-#audio_output {
-# type "winmm"
-# name "My WinMM output"
-## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
-# or
-## device "0" # optional
-## mixer_type "hardware" # optional
-#}
-#
-# An example of an openal output.
-#
-#audio_output {
-# type "openal"
-# name "My OpenAL output"
-## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
-#}
-#
-# An example of an sndio output.
-#
-#audio_output {
-# type "sndio"
-# name "sndio output"
-# mixer_type "software"
-#}
-#
-# An example of an OS X output:
-#
-#audio_output {
-# type "osx"
-# name "My OS X Device"
-## device "Built-in Output" # optional
-## channel_map "-1,-1,0,1" # optional
-#}
-#
-## Example "pipe" output:
-#
-#audio_output {
-# type "pipe"
-# name "my pipe"
-# command "aplay -f cd 2>/dev/null"
-## Or if you're want to use AudioCompress
-# command "AudioCompress -m | aplay -f cd 2>/dev/null"
-## Or to send raw PCM stream through PCM:
-# command "nc example.org 8765"
-# format "44100:16:2"
-#}
-#
-## An example of a null output (for no audio output):
-#
-#audio_output {
-# type "null"
-# name "My Null Output"
-# mixer_type "none" # optional
-#}
-#
-###############################################################################
-
-
-# Normalization automatic volume adjustments ##################################
-#
-# This setting specifies the type of ReplayGain to use. This setting can have
-# the argument "off", "album", "track" or "auto". "auto" is a special mode that
-# chooses between "track" and "album" depending on the current state of
-# random playback. If random playback is enabled then "track" mode is used.
-# See <http://www.replaygain.org> for more details about ReplayGain.
-# This setting is off by default.
-#
-#replaygain "album"
-#
-# This setting sets the pre-amp used for files that have ReplayGain tags. By
-# default this setting is disabled.
-#
-#replaygain_preamp "0"
-#
-# This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
-# By default this setting is disabled.
-#
-#replaygain_missing_preamp "0"
-#
-# This setting enables or disables ReplayGain limiting.
-# MPD calculates actual amplification based on the ReplayGain tags
-# and replaygain_preamp / replaygain_missing_preamp setting.
-# If replaygain_limit is enabled MPD will never amplify audio signal
-# above its original level. If replaygain_limit is disabled such amplification
-# might occur. By default this setting is enabled.
-#
-#replaygain_limit "yes"
-#
-# This setting enables on-the-fly normalization volume adjustment. This will
-# result in the volume of all playing audio to be adjusted so the output has
-# equal "loudness". This setting is disabled by default.
-#
-#volume_normalization "no"
-#
-###############################################################################
-
-# Character Encoding ##########################################################
-#
-# If file or directory names do not display correctly for your locale then you
-# may need to modify this setting.
-#
-#filesystem_charset "UTF-8"
-#
-###############################################################################
-#+end_src
-
-** msmtp
-:PROPERTIES:
-:header-args+: :tangle ~/.msmtprc
-:END:
-
-#+begin_src conf
-# Set default values for all following accounts.
-defaults
-port 587
-tls on
-auth on
-#tls_trust_file /etc/ssl/certs/ca-certificates.crt
-logfile ~/.msmtp.log
-
-# aminb
-account aminb
-host nix.aminb.org
-tls_fingerprint BB:98:B3:02:83:B0:E0:C3:49:3E:C2:B2:A8:60:62:78:03:B3:5D:B3:BD:B8:0A:39:BB:E4:B0:66:D1:CF:D1:6B
-tls_starttls on
-from amin@aminb.org
-user amin@aminb.org
-passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
-
-# gnu
-account gnu
-host fencepost.gnu.org
-tls_fingerprint 94:0E:37:EB:EA:44:5A:4B:B6:6F:16:3D:6C:7E:7E:44:2D:93:61:C1:FE:82:A8:29:5E:3C:12:4E:2D:BE:0E:2C
-tls_starttls on
-from aminb@gnu.org
-user aminb
-passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
-
-# uwaterloo
-account uwaterloo
-host connect.uwaterloo.ca
-tls_starttls on
-from abandali@uwaterloo.ca
-user abandali
-passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
-tls_trust_file /etc/ssl/certs/ca-certificates.crt
-
-# uwaterloo (friendly address)
-account uwaterloo-friendly : uwaterloo
-from amin.bandali@uwaterloo.ca
-
-# Set a default account
-account default : aminb
-#+end_src
-
-** ncmpcpp
-
-*** config
-:PROPERTIES:
-:header-args+: :tangle ~/.ncmpcpp/config
-:END:
-
-#+begin_src conf :tangle no
-##############################################################
-## This is the example configuration file. Copy it to ##
-## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
-## and set up your preferences. ##
-##############################################################
-#
-##### directories ######
-##
-## Directory for storing ncmpcpp related files.
-## Changing it is useful if you want to store
-## everything somewhere else and provide command
-## line setting for alternative location to config
-## file which defines that while launching ncmpcpp.
-##
-#
-ncmpcpp_directory = ~/.ncmpcpp
-#
-##
-## Directory for storing downloaded lyrics. It
-## defaults to ~/.lyrics since other MPD clients
-## (eg. ncmpc) also use that location.
-##
-#
-#lyrics_directory = ~/.lyrics
-#
-##### connection settings #####
-#
-#mpd_host = localhost
-#
-#mpd_port = 6600
-#
-#mpd_connection_timeout = 5
-#
-## Needed for tag editor and file operations to work.
-##
-mpd_music_dir = ~/usr/music
-#
-#mpd_crossfade_time = 5
-#
-##### music visualizer #####
-##
-## Note: In order to make music visualizer work you'll
-## need to use mpd fifo output, whose format parameter
-## has to be set to 44100:16:1 for mono visualization
-## or 44100:16:2 for stereo visualization. Example
-## configuration (it has to be put into mpd.conf):
-##
-## audio_output {
-## type "fifo"
-## name "Visualizer feed"
-## path "/tmp/mpd.fifo"
-## format "44100:16:2"
-## }
-##
-#
-visualizer_fifo_path = /tmp/mpd.fifo
-#
-##
-## Note: Below parameter is needed for ncmpcpp
-## to determine which output provides data for
-## visualizer and thus allow syncing between
-## visualization and sound as currently there
-## are some problems with it.
-##
-#
-visualizer_output_name = my fifo
-#
-##
-## If you set format to 44100:16:2, make it 'yes'.
-##
-visualizer_in_stereo = yes
-#
-##
-## Multiply received samples by given value. Very
-## useful for proper visualization of quiet music.
-##
-#visualizer_sample_multiplier = 1
-#
-##
-## Note: Below parameter defines how often ncmpcpp
-## has to "synchronize" visualizer and audio outputs.
-## 30 seconds is optimal value, but if you experience
-## synchronization problems, set it to lower value.
-## Keep in mind that sane values start with >=10.
-##
-#
-visualizer_sync_interval = 30
-#
-##
-## Note: To enable spectrum frequency visualization
-## you need to compile ncmpcpp with fftw3 support.
-##
-#
-## Available values: spectrum, wave, wave_filled, ellipse.
-##
-visualizer_type = spectrum
-#
-#visualizer_look = ●▮
-visualizer_look = "●•"
-#
-#visualizer_color = blue, cyan, green, yellow, magenta, red
-#
-## Alternative subset of 256 colors for terminals that support it.
-##
-#visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
-#
-##### system encoding #####
-##
-## ncmpcpp should detect your charset encoding
-## but if it failed to do so, you can specify
-## charset encoding you are using here.
-##
-## Note: You can see whether your ncmpcpp build
-## supports charset detection by checking output
-## of `ncmpcpp --version`.
-##
-## Note: Since MPD uses UTF-8 by default, setting
-## this option makes sense only if your encoding
-## is different.
-##
-#
-#system_encoding = ""
-#
-##### delays #####
-#
-## Time of inactivity (in seconds) after playlist
-## highlighting will be disabled (0 = always on).
-##
-#playlist_disable_highlight_delay = 5
-#
-## Defines how long messages are supposed to be visible.
-##
-#message_delay_time = 5
-#
-##### song format #####
-##
-## For a song format you can use:
-##
-## %l - length
-## %f - filename
-## %D - directory
-## %a - artist
-## %A - album artist
-## %t - title
-## %b - album
-## %y - date
-## %n - track number (01/12 -> 01)
-## %N - full track info (01/12 -> 01/12)
-## %g - genre
-## %c - composer
-## %p - performer
-## %d - disc
-## %C - comment
-## %P - priority
-## $R - begin right alignment
-##
-## If you want to make sure that a part of the format is displayed
-## only when certain tags are present, you can archieve it by
-## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
-## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
-## It is also possible to define a list of alternatives by providing
-## several groups and separating them with '|', e.g. '{%t}|{%f}'
-## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
-## present.
-##
-## Note: If you want to set limit on maximal length of a tag, just
-## put the appropriate number between % and character that defines
-## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
-##
-## In addition, formats support markers used for text attributes.
-## They are followed by character '$'. After that you can put:
-##
-## - 0 - default window color (discards all other colors)
-## - 1 - black
-## - 2 - red
-## - 3 - green
-## - 4 - yellow
-## - 5 - blue
-## - 6 - magenta
-## - 7 - cyan
-## - 8 - white
-## - 9 - end of current color
-## - b - bold text
-## - u - underline text
-## - r - reverse colors
-## - a - use alternative character set
-##
-## If you don't want to use a non-color attribute anymore, just put it
-## again, but this time insert character '/' between '$' and attribute
-## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
-## or filename with reversed colors.
-##
-## If you want to use 256 colors and/or background colors in formats
-## (the naming scheme is described below in section about color
-## definitions), it can be done with the syntax $(COLOR), e.g. to set
-## the artist tag to one of the non-standard colors and make it have
-## yellow background, you need to write $(197_yellow)%a$(end). Note
-## that for standard colors this is interchangable with attributes
-## listed above.
-##
-## Note: colors can be nested.
-##
-#
-#song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
-#
-#song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
-#
-#song_library_format = {%n - }{%t}|{%f}
-#
-#
-#alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
-#
-#alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
-#
-#now_playing_prefix = $b
-#
-#now_playing_suffix = $/b
-#
-#browser_playlist_prefix = "$2playlist$9 "
-#
-#selected_item_prefix = $6
-#
-#selected_item_suffix = $9
-#
-#modified_item_prefix = $3> $9
-#
-##
-## Note: attributes are not supported for the following variables.
-##
-#song_window_title_format = {%a - }{%t}|{%f}
-##
-## Note: Below variables are used for sorting songs in browser.
-## The sort mode determines how songs are sorted, and can be used
-## in combination with a sort format to specify a custom sorting format.
-## Available values for browser_sort_mode are "name", "mtime", "format"
-## and "noop".
-##
-#
-#browser_sort_mode = name
-#
-#browser_sort_format = {%a - }{%t}|{%f} {(%l)}
-#
-##### columns settings #####
-##
-## syntax of song columns list format is "column column etc."
-##
-## - syntax for each column is:
-##
-## (width of the column)[color of the column]{displayed tag}
-##
-## Note: Width is by default in %, if you want a column to
-## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
-## will be the column that take 10% of screen (so the real width
-## will depend on actual screen size), whereas (10f)[white]{a}
-## will take 10 terminal cells, no matter how wide the screen is.
-##
-## - color is optional (if you want the default one,
-## leave the field empty).
-##
-## Note: You can give a column additional attributes by putting appropriate
-## character after displayed tag character. Available attributes are:
-##
-## - r - column will be right aligned
-## - E - if tag is empty, empty tag marker won't be displayed
-##
-## You can also:
-##
-## - give a column custom name by putting it after attributes,
-## separated with character ':', e.g. {lr:Length} gives you
-## right aligned column of lengths named "Length".
-##
-## - define sequence of tags, that have to be displayed in case
-## predecessor is empty in a way similar to the one in classic
-## song format, i.e. using '|' character, e.g. {a|c|p:Owner}
-## creates column named "Owner" that tries to display artist
-## tag and then composer and performer if previous ones are
-## not available.
-##
-#
-#song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
-#
-##### various settings #####
-#
-##
-## Note: Custom command that will be executed each
-## time song changes. Useful for notifications etc.
-##
-#execute_on_song_change = ""
-#
-#playlist_show_mpd_host = no
-#
-#playlist_show_remaining_time = no
-#
-#playlist_shorten_total_times = no
-#
-#playlist_separate_albums = no
-#
-##
-## Note: Possible display modes: classic, columns.
-##
-#playlist_display_mode = columns
-#
-#browser_display_mode = classic
-#
-#search_engine_display_mode = classic
-#
-#playlist_editor_display_mode = classic
-#
-#discard_colors_if_item_is_selected = yes
-#
-#incremental_seeking = yes
-#
-#seek_time = 1
-#
-#volume_change_step = 2
-#
-#autocenter_mode = no
-#
-#centered_cursor = no
-#
-##
-## Note: You can specify third character which will
-## be used to build 'empty' part of progressbar.
-##
-#progressbar_look = =>
-progressbar_look = "─╼╶"
-#progressbar_look = "─⊙╶"
-#
-#progressbar_boldness = yes
-#
-## Available values: database, playlist.
-##
-#default_place_to_search_in = database
-#
-## Available values: classic, alternative.
-##
-#user_interface = classic
-#
-#data_fetching_delay = yes
-#
-## Available values: artist, album_artist, date, genre, composer, performer.
-##
-#media_library_primary_tag = artist
-#
-## Available values: wrapped, normal.
-##
-#default_find_mode = wrapped
-#
-#default_tag_editor_pattern = %n - %t
-#
-#header_visibility = yes
-#
-#statusbar_visibility = yes
-#
-#titles_visibility = yes
-#
-#header_text_scrolling = yes
-#
-#cyclic_scrolling = no
-#
-#lines_scrolled = 2
-#
-#follow_now_playing_lyrics = no
-#
-#fetch_lyrics_for_current_song_in_background = no
-#
-#store_lyrics_in_song_dir = no
-#
-#generate_win32_compatible_filenames = yes
-#
-#allow_for_physical_item_deletion = no
-#
-##
-## Note: If you set this variable, ncmpcpp will try to
-## get info from last.fm in language you set and if it
-## fails, it will fall back to english. Otherwise it will
-## use english the first time.
-##
-## Note: Language has to be expressed as an ISO 639 alpha-2 code.
-##
-#lastfm_preferred_language = en
-#
-#show_hidden_files_in_local_browser = no
-#
-##
-## How shall screen switcher work?
-##
-## - "previous" - switch between the current and previous screen.
-## - "screen1,...,screenN" - switch between given sequence of screens.
-##
-## Screens available for use: help, playlist, browser, search_engine,
-## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
-##
-#screen_switcher_mode = playlist, browser
-#
-##
-## Note: You can define startup screen
-## by choosing screen from the list above.
-##
-#startup_screen = playlist
-#
-##
-## Note: You can define startup slave screen
-## by choosing screen from the list above or
-## an empty value for no slave screen.
-##
-#startup_slave_screen = ""
-#
-#startup_slave_screen_focus = no
-#
-##
-## Default width of locked screen (in %).
-## Acceptable values are from 20 to 80.
-##
-#
-#locked_screen_width_part = 50
-#
-#ask_for_locked_screen_width_part = yes
-#
-#jump_to_now_playing_song_at_start = yes
-#
-#ask_before_clearing_playlists = yes
-#
-#clock_display_seconds = no
-#
-#display_volume_level = yes
-#
-#display_bitrate = no
-#
-#display_remaining_time = no
-#
-## Available values: none, basic, extended, perl.
-##
-#regular_expressions = perl
-#
-##
-## Note: If below is enabled, ncmpcpp will ignore leading
-## "The" word while sorting items in browser, tags in
-## media library, etc.
-##
-#ignore_leading_the = no
-#
-#block_search_constraints_change_if_items_found = yes
-#
-#mouse_support = yes
-#
-#mouse_list_scroll_whole_page = yes
-#
-#empty_tag_marker = <empty>
-#
-#tags_separator = " | "
-#
-#tag_editor_extended_numeration = no
-#
-#media_library_sort_by_mtime = no
-#
-#enable_window_title = yes
-#
-##
-## Note: You can choose default search mode for search
-## engine. Available modes are:
-##
-## - 1 - use mpd built-in searching (no regexes, pattern matching)
-## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
-## but if your mpd is on a remote machine, downloading big database
-## to process it can take a while
-## - 3 - match only exact values (this mode uses mpd function for searching
-## in database and local one for searching in current playlist)
-##
-#
-#search_engine_default_search_mode = 1
-#
-#external_editor = nano
-#
-## Note: set to yes if external editor is a console application.
-##
-#use_console_editor = yes
-#
-##### colors definitions #####
-##
-## It is possible to set a background color by setting a color
-## value "<foreground>_<background>", e.g. red_black will set
-## foregound color to red and background color to black.
-##
-## In addition, for terminals that support 256 colors it
-## is possible to set one of them by using a number in range
-## [1, 256] instead of color name, e.g. numerical value
-## corresponding to red_black is 2_1. To find out if the
-## terminal supports 256 colors, run ncmpcpp and check out
-## the bottom of the help screen for list of available colors
-## and their numerical values.
-##
-## Note: due to technical limitations of ncurses, if 256 colors
-## are used, it is possible to either use only the colors with
-## default background color, or all pairs from 1_1 up to 254_127,
-## depending on the ncurses version used.
-##
-#
-#colors_enabled = yes
-#
-#empty_tag_color = cyan
-#
-#header_window_color = default
-#
-#volume_color = default
-#
-#state_line_color = default
-#
-#state_flags_color = default
-#
-#main_window_color = yellow
-#
-#color1 = white
-#
-#color2 = green
-#
-#main_window_highlight_color = yellow
-#
-#progressbar_color = black
-#
-#progressbar_elapsed_color = green
-#
-#statusbar_color = default
-#
-#alternative_ui_separator_color = black
-#
-#active_column_color = red
-#
-#window_border_color = green
-#
-#active_window_border = red
-#
-#+end_src
-
-*** bindings
-:PROPERTIES:
-:header-args+: :tangle ~/.ncmpcpp/bindings
-:END:
-
-#+begin_src conf :tangle no
-def_key "j"
- scroll_down
-def_key "k"
- scroll_up
-
-def_key "ctrl-u"
- page_up
-def_key "ctrl-d"
- page_down
-
-def_key "h"
- previous_column
-def_key "l"
- next_column
-
-def_key "."
- show_lyrics
-
-def_key "n"
- next_found_item
-def_key "N"
- previous_found_item
-
-def_key "J"
- move_sort_order_down
-def_key "K"
- move_sort_order_up
-#+end_src
-
-** notmuch
-
-*** notmuch-config
-:PROPERTIES:
-:header-args+: :tangle ~/.notmuch-config
-:END:
-
-#+begin_src conf
-# .notmuch-config - Configuration file for the notmuch mail system
-#
-# For more information about notmuch, see https://notmuchmail.org
-
-# Database configuration
-#
-# The only value supported here is 'path' which should be the top-level
-# directory where your mail currently exists and to where mail will be
-# delivered in the future. Files should be individual email messages.
-# Notmuch will store its database within a sub-directory of the path
-# configured here named ".notmuch".
-#
-[database]
-path=/home/amin/mail
-
-# User configuration
-#
-# Here is where you can let notmuch know how you would like to be
-# addressed. Valid settings are
-#
-# name Your full name.
-# primary_email Your primary email address.
-# other_email A list (separated by ';') of other email addresses
-# at which you receive email.
-#
-# Notmuch will use the various email addresses configured here when
-# formatting replies. It will avoid including your own addresses in the
-# recipient list of replies, and will set the From address based on the
-# address to which the original email was addressed.
-#
-[user]
-name=Amin Bandali
-primary_email=amin@aminb.org
-other_email=amin.bandali@uwaterloo.ca;mbandali@uwaterloo.ca;aminb@gnu.org;
-
-# Configuration for "notmuch new"
-#
-# The following options are supported here:
-#
-# tags A list (separated by ';') of the tags that will be
-# added to all messages incorporated by "notmuch new".
-#
-# ignore A list (separated by ';') of file and directory names
-# that will not be searched for messages by "notmuch new".
-#
-# NOTE: *Every* file/directory that goes by one of those
-# names will be ignored, independent of its depth/location
-# in the mail store.
-#
-[new]
-tags=new;
-#tags=unread;inbox;
-ignore=.uidvalidity;.mbsyncstate
-
-# Search configuration
-#
-# The following option is supported here:
-#
-# exclude_tags
-# A ;-separated list of tags that will be excluded from
-# search results by default. Using an excluded tag in a
-# query will override that exclusion.
-#
-[search]
-exclude_tags=deleted;spam;
-
-# Maildir compatibility configuration
-#
-# The following option is supported here:
-#
-# synchronize_flags Valid values are true and false.
-#
-# If true, then the following maildir flags (in message filenames)
-# will be synchronized with the corresponding notmuch tags:
-#
-# Flag Tag
-# ---- -------
-# D draft
-# F flagged
-# P passed
-# R replied
-# S unread (added when 'S' flag is not present)
-#
-# The "notmuch new" command will notice flag changes in filenames
-# and update tags, while the "notmuch tag" and "notmuch restore"
-# commands will notice tag changes and update flags in filenames
-#
-[maildir]
-synchronize_flags=true
-
-# Cryptography related configuration
-#
-# The following option is supported here:
-#
-# gpg_path
-# binary name or full path to invoke gpg.
-#
-[crypto]
-gpg_path=gpg
-#+end_src
-
-*** post-new hook
-:PROPERTIES:
-:header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
-:END:
-
-#+begin_src sh
-afew -tn
-
-# apply tags to lists
-notmuch tag +lists +lists/deepspec -- folder:amin/lists/deepspec
-notmuch tag +lists +lists/haskell-cafe -- folder:amin/lists/haskell-cafe
-notmuch tag +lists +lists/haskell-weekly -- folder:amin/lists/haskell-weekly
-notmuch tag +lists +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
-notmuch tag +lists +lists/notmuch -- folder:amin/lists/notmuch
-notmuch tag +lists +lists/info-gnu-emacs -- folder:amin/lists/info-gnu-emacs
-notmuch tag +lists +lists/help-gnu-emacs -- folder:amin/lists/help-gnu-emacs
-notmuch tag +lists +lists/emacs-devel -- folder:amin/lists/emacs-devel
-#+end_src
-
-*** notmuch.service
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/notmuch.service
-:END:
-
-#+begin_src conf :tangle no
-[Unit]
-Description=notmuch service
-
-[Service]
-Type=oneshot
-ExecStart=/usr/bin/notmuch new
-StandardOutput=syslog
-StandardError=syslog
-#+end_src
-
-*** notmuch.timer
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/notmuch.timer
-:END:
-
-#+begin_src conf :tangle no
-[Unit]
-Description=notmuch timer
-
-[Timer]
-OnCalendar=*:0/5
-Persistent=true
-Unit=notmuch.service
-
-[Install]
-WantedBy=timers.target
-#+end_src
-
-** offlineimap
-
-*** offlineimaprc
-:PROPERTIES:
-:header-args+: :tangle ~/.offlineimaprc
-:END:
-
-#+begin_src conf :tangle no
-[general]
-pythonfile = ~/.offlineimap.py
-accounts = Gmail, aminb
-maxsyncaccounts = 3
-
-[Account Gmail]
-localrepository = GmailL
-remoterepository = GmailR
-
-[Account aminb]
-localrepository = aminbL
-remoterepository = aminbR
-
-[Repository GmailL]
-type = Maildir
-localfolders = ~/Maildir/Gmail
-
-[Repository GmailR]
-type = IMAP
-remotehost = imap.gmail.com
-remoteusereval = mailuser("gmail")
-remotepasseval = mailpasswd("gmail")
-sslcacertfile = /etc/ssl/certs/ca-certificates.crt
-ssl = yes
-folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
-maxconnections = 1
-realdelete = no
-
-[Repository aminbL]
-type = Maildir
-localfolders = ~/Maildir/aminb
-
-[Repository aminbR]
-type = IMAP
-remotehost = mail.aminb.org
-remoteusereval = mailuser("aminb")
-remotepasseval = mailpasswd("aminb")
-sslcacertfile = /etc/ssl/certs/ca-certificates.crt
-ssl = yes
-folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
-maxconnections = 1
-realdelete = no
-#+end_src
-
-*** offlineimap.py
-:PROPERTIES:
-:header-args+: :tangle ~/.offlineimap.py
-:END:
-
-#+begin_src python :tangle no
-import os
-import subprocess
-
-def mailpasswd(acct):
- acct = os.path.basename(acct)
- path = "/home/amin/.passwd/%s.gpg" % acct
- args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
- try:
- return subprocess.check_output(args).strip()
- except subprocess.CalledProcessError:
- return ""
-
-def mailuser(acct):
- acct = os.path.basename(acct)
- path = "/home/amin/.passwd/%s" % acct
- args = ["cat", path]
- try:
- return subprocess.check_output(args).strip()
- except subprocess.CalledProcessError:
- return ""
-
-def prime_gpg_agent():
- ret = False
- i = 1
- while not ret:
- ret = (mailpasswd("prime") == "prime")
- if i > 2:
- from offlineimap.ui import getglobalui
- sys.stderr.write("Error reading in passwords. Terminating.\n")
- getglobalui().terminate()
- i += 1
- return ret
-
-prime_gpg_agent()
-#+end_src
-
-** polybar
-
-*** config
-:PROPERTIES:
-:header-args+: :tangle ~/.config/polybar/config
-:END:
-
-#+begin_src conf :tangle no
-;=====================================================
-;
-; To learn more about how to configure Polybar
-; go to https://github.com/jaagr/polybar
-;
-; The README contains alot of information
-;
-;=====================================================
-
-[colors]
-;background = ${xrdb:color0:#222}
-background = #222
-background-alt = #444
-;foreground = ${xrdb:color7:#222}
-foreground = #eee
-foreground-alt = #888
-primary = #ffb52a
-secondary = #e60053
-alert = #bd2c40
-
-[bar/main]
-;monitor = ${env:MONITOR:HDMI-1}
-width = 100%
-height = 27
-;offset-x = 1%
-;offset-y = 1%
-radius = 3.0
-fixed-center = true
-
-background = ${colors.background}
-foreground = ${colors.foreground}
-
-line-size = 3
-line-color = #f00
-
-border-size = 4
-border-color = #00000000
-
-padding-left = 0
-padding-right = 2
-
-module-margin-left = 2
-module-margin-right = 2
-
-font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
-font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
-font-2 = Wuncon Siji:pixelsize=10;1
-font-3 = FontAwesome:pixelsize=10;1
-
-modules-left = bspwm xwindow
-modules-center =
-modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
-
-tray-position = right
-tray-padding = 1
-;tray-transparent = true
-;tray-background = #0063ff
-tray-maxsize = 18
-
-wm-restack = bspwm
-
-;override-redirect = true
-
-scroll-up = bspwm-desknext
-scroll-down = bspwm-deskprev
-
-[module/xwindow]
-type = internal/xwindow
-label = %title:0:50:...%
-
-[module/xkeyboard]
-type = internal/xkeyboard
-blacklist-0 = num lock
-
-format-prefix = " "
-format-prefix-foreground = ${colors.foreground-alt}
-format-prefix-underline = ${colors.secondary}
-
-label-layout = %layout%
-label-layout-underline = ${colors.secondary}
-
-label-indicator-padding = 2
-label-indicator-margin = 1
-label-indicator-background = ${colors.secondary}
-label-indicator-underline = ${colors.secondary}
-
-[module/filesystem]
-type = internal/fs
-interval = 25
-
-mount-0 = /
-
-label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
-label-unmounted = %mountpoint% not mounted
-label-unmounted-foreground = ${colors.foreground-alt}
-
-[module/bspwm]
-type = internal/bspwm
-
-label-focused = %index%
-label-focused-background = ${colors.background-alt}
-label-focused-underline= ${colors.primary}
-label-focused-padding = 2
-
-label-occupied = %index%
-label-occupied-padding = 2
-
-label-urgent = %index%!
-label-urgent-background = ${colors.alert}
-label-urgent-padding = 2
-
-label-empty = %index%
-label-empty-foreground = ${colors.foreground-alt}
-label-empty-padding = 2
-
-[module/i3]
-type = internal/i3
-format = <label-state> <label-mode>
-index-sort = true
-wrapping-scroll = false
-
-; Only show workspaces on the same output as the bar
-;pin-workspaces = true
-
-label-mode-padding = 2
-label-mode-foreground = #000
-label-mode-background = ${colors.primary}
-
-; focused = Active workspace on focused monitor
-label-focused = %index%
-label-focused-background = ${module/bspwm.label-focused-background}
-label-focused-underline = ${module/bspwm.label-focused-underline}
-label-focused-padding = ${module/bspwm.label-focused-padding}
-
-; unfocused = Inactive workspace on any monitor
-label-unfocused = %index%
-label-unfocused-padding = ${module/bspwm.label-occupied-padding}
-
-; visible = Active workspace on unfocused monitor
-label-visible = %index%
-label-visible-background = ${self.label-focused-background}
-label-visible-underline = ${self.label-focused-underline}
-label-visible-padding = ${self.label-focused-padding}
-
-; urgent = Workspace with urgency hint set
-label-urgent = %index%
-label-urgent-background = ${module/bspwm.label-urgent-background}
-label-urgent-padding = ${module/bspwm.label-urgent-padding}
-
-[module/mpd]
-type = internal/mpd
-format-online = <label-song> <icon-prev> <icon-stop> <toggle> <icon-next>
-
-icon-prev =
-icon-stop =
-icon-play =
-icon-pause =
-icon-next =
-
-label-song-maxlen = 25
-label-song-ellipsis = true
-
-[module/xbacklight]
-type = internal/xbacklight
-
-format = <label> <bar>
-label = BL
-
-bar-width = 10
-bar-indicator = |
-bar-indicator-foreground = #ff
-bar-indicator-font = 2
-bar-fill = ─
-bar-fill-font = 2
-bar-fill-foreground = #9f78e1
-bar-empty = ─
-bar-empty-font = 2
-bar-empty-foreground = ${colors.foreground-alt}
-
-[module/backlight-acpi]
-inherit = module/xbacklight
-type = internal/backlight
-;card = intel_backlight
-card = mba6x_backlight
-
-[module/cpu]
-type = internal/cpu
-interval = 2
-format-prefix = " "
-format-prefix-foreground = ${colors.foreground-alt}
-format-underline = #f90000
-label = %percentage%%
-
-[module/memory]
-type = internal/memory
-interval = 2
-format-prefix = " "
-format-prefix-foreground = ${colors.foreground-alt}
-format-underline = #4bffdc
-label = %percentage_used%%
-
-[module/wlan]
-type = internal/network
-interface =
-interval = 3.0
-
-format-connected = <ramp-signal> <label-connected>
-format-connected-underline = #9f78e1
-label-connected = %essid%
-
-format-disconnected =
-;format-disconnected = <label-disconnected>
-;format-disconnected-underline = ${self.format-connected-underline}
-;label-disconnected = %ifname% disconnected
-;label-disconnected-foreground = ${colors.foreground-alt}
-
-ramp-signal-0 =
-ramp-signal-1 =
-ramp-signal-2 =
-ramp-signal-3 =
-ramp-signal-4 =
-ramp-signal-foreground = ${colors.foreground-alt}
-
-[module/eth]
-type = internal/network
-interface =
-interval = 3.0
-
-format-connected-underline = #55aa55
-format-connected-prefix = " "
-format-connected-prefix-foreground = ${colors.foreground-alt}
-label-connected = %local_ip%
-
-format-disconnected =
-;format-disconnected = <label-disconnected>
-;format-disconnected-underline = ${self.format-connected-underline}
-;label-disconnected = %ifname% disconnected
-;label-disconnected-foreground = ${colors.foreground-alt}
-
-[module/date]
-type = internal/date
-interval = 5
-
-date =
-date-alt = " %Y-%m-%d"
-
-time = %H:%M
-time-alt = %H:%M:%S
-
-format-prefix =
-format-prefix-foreground = ${colors.foreground-alt}
-format-underline = #0a6cf5
-
-label = %date% %time%
-
-[module/volume]
-type = internal/volume
-
-format-volume = <label-volume> <bar-volume>
-label-volume = vol
-label-volume-foreground = ${root.foreground}
-
-format-muted-prefix = " "
-format-muted-foreground = ${colors.foreground-alt}
-label-muted = mute
-
-bar-volume-width = 10
-bar-volume-foreground-0 = #55aa55
-bar-volume-foreground-1 = #55aa55
-bar-volume-foreground-2 = #55aa55
-bar-volume-foreground-3 = #55aa55
-bar-volume-foreground-4 = #55aa55
-bar-volume-foreground-5 = #f5a70a
-bar-volume-foreground-6 = #ff5555
-bar-volume-gradient = false
-bar-volume-indicator = |
-bar-volume-indicator-font = 2
-bar-volume-fill = ─
-bar-volume-fill-font = 2
-bar-volume-empty = ─
-bar-volume-empty-font = 2
-bar-volume-empty-foreground = ${colors.foreground-alt}
-
-[module/battery]
-type = internal/battery
-battery = BAT0
-adapter = ADP1
-full-at = 64
-
-format-charging = <animation-charging> <label-charging>
-format-charging-underline = #ffb52a
-
-format-discharging = <ramp-capacity> <label-discharging>
-format-discharging-underline = ${self.format-charging-underline}
-
-format-full-prefix = " "
-format-full-prefix-foreground = ${colors.foreground-alt}
-format-full-underline = ${self.format-charging-underline}
-
-ramp-capacity-0 =
-ramp-capacity-1 =
-ramp-capacity-2 =
-ramp-capacity-foreground = ${colors.foreground-alt}
-
-animation-charging-0 =
-animation-charging-1 =
-animation-charging-2 =
-animation-charging-foreground = ${colors.foreground-alt}
-animation-charging-framerate = 750
-
-[module/temperature]
-type = internal/temperature
-thermal-zone = 1
-warn-temperature = 66
-
-format = <ramp> <label>
-format-underline = #f50a4d
-format-warn = <ramp> <label-warn>
-format-warn-underline = ${self.format-underline}
-
-label = %temperature%
-label-warn = %temperature%
-label-warn-foreground = ${colors.secondary}
-
-ramp-0 =
-ramp-1 =
-ramp-2 =
-ramp-foreground = ${colors.foreground-alt}
-
-[module/powermenu]
-type = custom/menu
-
-format-spacing = 1
-
-label-open =
-label-open-foreground = ${colors.secondary}
-label-close = cancel
-label-close-foreground = ${colors.secondary}
-label-separator = |
-label-separator-foreground = ${colors.foreground-alt}
-
-menu-0-0 = reboot
-menu-0-0-exec = menu-open-1
-menu-0-1 = power off
-menu-0-1-exec = menu-open-2
-
-menu-1-0 = cancel
-menu-1-0-exec = menu-open-0
-menu-1-1 = reboot
-menu-1-1-exec = sudo reboot
-
-menu-2-0 = power off
-menu-2-0-exec = sudo poweroff
-menu-2-1 = cancel
-menu-2-1-exec = menu-open-0
-
-[module/mail]
-type = custom/script
-interval = 60
-format = <label>
-format-prefix = " "
-format-prefix-foreground = ${colors.foreground-alt}
-format-underline = #0a6cf5
-exec = notmuch count tag:unread
-
-[settings]
-screenchange-reload = true
-;compositing-background = xor
-;compositing-background = screen
-;compositing-foreground = source
-;compositing-border = over
-
-[global/wm]
-margin-top = 0
-margin-bottom = 0
-
-; vim:ft=dosini
-#+end_src
-
-*** polybar-launch
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
-:END:
-
-#+begin_src sh :tangle no
-# Terminate already running bar instances
-killall -q polybar
-
-# Wait until the processes have been shut down
-while pgrep -x polybar >/dev/null; do sleep 1; done
-
-# Launch main bar
-polybar main &
-
-echo "Bars launched..."
-#+end_src
-
-** PowerTOP
-:PROPERTIES:
-:header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
-:END:
-
-#+begin_src conf
-[Unit]
-Description=Powertop tunings
-
-[Service]
-ExecStart=/usr/bin/powertop --auto-tune
-RemainAfterExit=true
-
-[Install]
-WantedBy=multi-user.target
-#+end_src
-
-** ranger
-
-*** rc.conf
-:PROPERTIES:
-:header-args+: :tangle ~/.config/ranger/rc.conf
-:END:
-
-#+begin_src conf :tangle no
-# ===================================================================
-# This file contains the default startup commands for ranger.
-# To change them, it is recommended to create the file
-# ~/.config/ranger/rc.conf and add your custom commands there.
-#
-# If you copy this whole file there, you may want to set the environment
-# variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
-#
-# The purpose of this file is mainly to define keybindings and settings.
-# For running more complex python code, please create a plugin in "plugins/" or
-# a command in "commands.py".
-#
-# Each line is a command that will be run before the user interface
-# is initialized. As a result, you can not use commands which rely
-# on the UI such as :delete or :mark.
-# ===================================================================
-
-# ===================================================================
-# == Options
-# ===================================================================
-
-# How many columns are there, and what are their relative widths?
-set column_ratios 1,3,4
-
-# Which files should be hidden? (regular expression)
-set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
-
-# Show hidden files? You can toggle this by typing 'zh'
-set show_hidden false
-
-# Ask for a confirmation when running the "delete" command?
-# Valid values are "always" (default), "never", "multiple"
-# With "multiple", ranger will ask only if you delete multiple files at once.
-set confirm_on_delete multiple
-
-# Which script is used to generate file previews?
-# ranger ships with scope.sh, a script that calls external programs (see
-# README for dependencies) to preview images, archives, etc.
-set preview_script ~/.config/ranger/scope.sh
-
-# Use the external preview script or display simple plain text previews?
-set use_preview_script true
-
-# Open all images in this directory when running certain image viewers
-# like feh or sxiv? You can still open selected files by marking them.
-set open_all_images true
-
-# Be aware of version control systems and display information.
-set vcs_aware false
-
-# State of the three backends git, hg, bzr. The possible states are
-# disabled, local (only show local info), enabled (show local and remote
-# information).
-set vcs_backend_git enabled
-set vcs_backend_hg disabled
-set vcs_backend_bzr disabled
-
-# Preview images in full color with the external command "w3mimgpreview"?
-# This requires the console web browser "w3m" and a supported terminal.
-# It has been successfully tested with "xterm" and "urxvt" without tmux.
-set preview_images true
-
-# Use a unicode "..." character to mark cut-off filenames?
-set unicode_ellipsis false
-
-# Show dotfiles in the bookmark preview box?
-set show_hidden_bookmarks true
-
-# Which colorscheme to use? These colorschemes are available by default:
-# default, jungle, snow
-set colorscheme default
-
-# Preview files on the rightmost column?
-# And collapse (shrink) the last column if there is nothing to preview?
-set preview_files true
-set preview_directories true
-set collapse_preview true
-
-# Save the console history on exit?
-set save_console_history true
-
-# Draw the status bar on top of the browser window (default: bottom)
-set status_bar_on_top false
-
-# Draw a progress bar in the status bar which displays the average state of all
-# currently running tasks which support progress bars?
-set draw_progress_bar_in_status_bar true
-
-# Draw borders around columns?
-set draw_borders true
-
-# Display the directory name in tabs?
-set dirname_in_tabs false
-
-# Enable the mouse support?
-set mouse_enabled true
-
-# Display the file size in the main column or status bar?
-set display_size_in_main_column true
-set display_size_in_status_bar true
-
-# Display files tags in all columns or only in main column?
-set display_tags_in_all_columns true
-
-# Set a title for the window?
-set update_title false
-
-# Set the title to "ranger" in the tmux program?
-set update_tmux_title false
-
-# Shorten the title if it gets long? The number defines how many
-# directories are displayed at once, 0 turns off this feature.
-set shorten_title 3
-
-# Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
-set tilde_in_titlebar false
-
-# How many directory-changes or console-commands should be kept in history?
-set max_history_size 20
-set max_console_history_size 50
-
-# Try to keep so much space between the top/bottom border when scrolling:
-set scroll_offset 8
-
-# Flush the input after each key hit? (Noticable when ranger lags)
-set flushinput true
-
-# Padding on the right when there's no preview?
-# This allows you to click into the space to run the file.
-set padding_right true
-
-# Save bookmarks (used with mX and `X) instantly?
-# This helps to synchronize bookmarks between multiple ranger
-# instances but leads to *slight* performance loss.
-# When false, bookmarks are saved when ranger is exited.
-set autosave_bookmarks true
-
-# You can display the "real" cumulative size of directories by using the
-# command :get_cumulative_size or typing "dc". The size is expensive to
-# calculate and will not be updated automatically. You can choose
-# to update it automatically though by turning on this option:
-set autoupdate_cumulative_size false
-
-# Turning this on makes sense for screen readers:
-set show_cursor false
-
-# One of: size, basename, mtime, type
-set sort natural
-
-# Additional sorting options
-set sort_reverse false
-set sort_case_insensitive true
-set sort_directories_first true
-
-# Enable this if key combinations with the Alt Key don't work for you.
-# (Especially on xterm)
-set xterm_alt_key false
-
-# ===================================================================
-# == Local Options
-# ===================================================================
-# You can set local options that only affect a single directory.
-
-# Examples:
-# setlocal path=~/downloads sort mtime
-
-# ===================================================================
-# == Command Aliases in the Console
-# ===================================================================
-
-alias e edit
-alias q quit
-alias q! quitall
-alias qall quitall
-alias setl setlocal
-
-alias filter scout -prt
-alias find scout -aet
-alias mark scout -mr
-alias unmark scout -Mr
-alias search scout -rs
-alias search_inc scout -rts
-alias travel scout -aefiklst
-
-# ===================================================================
-# == Define keys for the browser
-# ===================================================================
-
-# Basic
-map Q quit!
-map q quit
-copymap q ZZ ZQ
-
-map R reload_cwd
-map <C-r> reset
-map <C-l> redraw_window
-map <C-c> abort
-map <esc> change_mode normal
-
-map i display_file
-map ? help
-map W display_log
-map w taskview_open
-map S shell $SHELL
-
-map : console
-map ; console
-map ! console shell
-map @ console -p6 shell %%s
-map # console shell -p
-map s console shell
-map r chain draw_possible_programs; console open_with
-map f console find
-map cd console cd
-
-# Tagging / Marking
-map t tag_toggle
-map ut tag_remove
-map "<any> tag_toggle tag=%any
-map <Space> mark_files toggle=True
-map v mark_files all=True toggle=True
-map uv mark_files all=True val=False
-map V toggle_visual_mode
-map uV toggle_visual_mode reverse=True
-
-# For the nostalgics: Midnight Commander bindings
-map <F1> help
-map <F3> display_file
-map <F4> edit
-map <F5> copy
-map <F6> cut
-map <F7> console mkdir
-map <F8> console delete
-map <F10> exit
-
-# In case you work on a keyboard with dvorak layout
-map <UP> move up=1
-map <DOWN> move down=1
-map <LEFT> move left=1
-map <RIGHT> move right=1
-map <HOME> move to=0
-map <END> move to=-1
-map <PAGEDOWN> move down=1 pages=True
-map <PAGEUP> move up=1 pages=True
-map <CR> move right=1
-map <DELETE> console delete
-map <INSERT> console touch
-
-# VIM-like
-copymap <UP> k
-copymap <DOWN> j
-copymap <LEFT> h
-copymap <RIGHT> l
-copymap <HOME> gg
-copymap <END> G
-copymap <PAGEDOWN> <C-F>
-copymap <PAGEUP> <C-B>
-
-map J move down=0.5 pages=True
-map K move up=0.5 pages=True
-copymap J <C-D>
-copymap K <C-U>
-
-# Jumping around
-map H history_go -1
-map L history_go 1
-map ] move_parent 1
-map [ move_parent -1
-map } traverse
-
-map gh cd ~
-map ge cd /etc
-map gu cd /usr
-map gd cd /dev
-map gl cd -r .
-map gL cd -r %f
-map go cd /opt
-map gv cd /var
-map gm cd /media
-map gM cd /mnt
-map gs cd /srv
-map gr cd /
-map gR eval fm.cd(ranger.RANGERDIR)
-map g/ cd /
-map g? cd /usr/share/doc/ranger
-
-# External Programs
-map E edit
-map du shell -p du --max-depth=1 -h --apparent-size
-map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
-map yp shell -d echo -n %d/%f | xsel -i
-map yd shell -d echo -n %d | xsel -i
-map yn shell -d echo -n %f | xsel -i
-
-# Filesystem Operations
-map = chmod
-
-map cw console rename
-map A eval fm.open_console('rename ' + fm.thisfile.basename)
-map I eval fm.open_console('rename ' + fm.thisfile.basename, position=7)
-
-map pp paste
-map po paste overwrite=True
-map pl paste_symlink relative=False
-map pL paste_symlink relative=True
-map phl paste_hardlink
-map pht paste_hardlinked_subtree
-
-map dd cut
-map ud uncut
-map da cut mode=add
-map dr cut mode=remove
-
-map yy copy
-map uy uncut
-map ya copy mode=add
-map yr copy mode=remove
-
-# Temporary workarounds
-map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
-map dG eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
-map dj eval fm.cut(dirarg=dict(down=1), narg=quantifier)
-map dk eval fm.cut(dirarg=dict(up=1), narg=quantifier)
-map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
-map yG eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
-map yj eval fm.copy(dirarg=dict(down=1), narg=quantifier)
-map yk eval fm.copy(dirarg=dict(up=1), narg=quantifier)
-
-# Searching
-map / console search
-map n search_next
-map N search_next forward=False
-map ct search_next order=tag
-map cs search_next order=size
-map ci search_next order=mimetype
-map cc search_next order=ctime
-map cm search_next order=mtime
-map ca search_next order=atime
-
-# Tabs
-map <C-n> tab_new ~
-map <C-w> tab_close
-map <TAB> tab_move 1
-map <S-TAB> tab_move -1
-map <A-Right> tab_move 1
-map <A-Left> tab_move -1
-map gt tab_move 1
-map gT tab_move -1
-map gn tab_new ~
-map gc tab_close
-map uq tab_restore
-map <a-1> tab_open 1
-map <a-2> tab_open 2
-map <a-3> tab_open 3
-map <a-4> tab_open 4
-map <a-5> tab_open 5
-map <a-6> tab_open 6
-map <a-7> tab_open 7
-map <a-8> tab_open 8
-map <a-9> tab_open 9
-
-# Sorting
-map or toggle_option sort_reverse
-map os chain set sort=size; set sort_reverse=False
-map ob chain set sort=basename; set sort_reverse=False
-map on chain set sort=natural; set sort_reverse=False
-map om chain set sort=mtime; set sort_reverse=False
-map oc chain set sort=ctime; set sort_reverse=False
-map oa chain set sort=atime; set sort_reverse=False
-map ot chain set sort=type; set sort_reverse=False
-
-map oS chain set sort=size; set sort_reverse=True
-map oB chain set sort=basename; set sort_reverse=True
-map oN chain set sort=natural; set sort_reverse=True
-map oM chain set sort=mtime; set sort_reverse=True
-map oC chain set sort=ctime; set sort_reverse=True
-map oA chain set sort=atime; set sort_reverse=True
-map oT chain set sort=type; set sort_reverse=True
-
-map dc get_cumulative_size
-
-# Settings
-map zc toggle_option collapse_preview
-map zd toggle_option sort_directories_first
-map zh toggle_option show_hidden
-map <C-h> toggle_option show_hidden
-map zi toggle_option flushinput
-map zm toggle_option mouse_enabled
-map zp toggle_option preview_files
-map zP toggle_option preview_directories
-map zs toggle_option sort_case_insensitive
-map zu toggle_option autoupdate_cumulative_size
-map zv toggle_option use_preview_script
-map zf console filter
-
-# Bookmarks
-map `<any> enter_bookmark %any
-map '<any> enter_bookmark %any
-map m<any> set_bookmark %any
-map um<any> unset_bookmark %any
-
-map m<bg> draw_bookmarks
-copymap m<bg> um<bg> `<bg> '<bg>
-
-# Generate all the chmod bindings with some python help:
-eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
-eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
-eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
-eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
-eval for arg in "rwxXst": cmd("map +{0} shell -d chmod u+{0} %s".format(arg))
-
-eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
-eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
-eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
-eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
-eval for arg in "rwxXst": cmd("map -{0} shell -d chmod u-{0} %s".format(arg))
-
-# ===================================================================
-# == Define keys for the console
-# ===================================================================
-# Note: Unmapped keys are passed directly to the console.
-
-# Basic
-cmap <tab> eval fm.ui.console.tab()
-cmap <s-tab> eval fm.ui.console.tab(-1)
-cmap <ESC> eval fm.ui.console.close()
-cmap <CR> eval fm.ui.console.execute()
-cmap <C-l> redraw_window
-
-copycmap <ESC> <C-c>
-copycmap <CR> <C-j>
-
-# Move around
-cmap <up> eval fm.ui.console.history_move(-1)
-cmap <down> eval fm.ui.console.history_move(1)
-cmap <left> eval fm.ui.console.move(left=1)
-cmap <right> eval fm.ui.console.move(right=1)
-cmap <home> eval fm.ui.console.move(right=0, absolute=True)
-cmap <end> eval fm.ui.console.move(right=-1, absolute=True)
-
-# Line Editing
-cmap <backspace> eval fm.ui.console.delete(-1)
-cmap <delete> eval fm.ui.console.delete(0)
-cmap <C-w> eval fm.ui.console.delete_word()
-cmap <C-k> eval fm.ui.console.delete_rest(1)
-cmap <C-u> eval fm.ui.console.delete_rest(-1)
-cmap <C-y> eval fm.ui.console.paste()
-
-# And of course the emacs way
-copycmap <up> <C-p>
-copycmap <down> <C-n>
-copycmap <left> <C-b>
-copycmap <right> <C-f>
-copycmap <home> <C-a>
-copycmap <end> <C-e>
-copycmap <delete> <C-d>
-copycmap <backspace> <C-h>
-
-# Note: There are multiple ways to express backspaces. <backspace> (code 263)
-# and <backspace2> (code 127). To be sure, use both.
-copycmap <backspace> <backspace2>
-
-# This special expression allows typing in numerals:
-cmap <allow_quantifiers> false
-
-# ===================================================================
-# == Pager Keybindings
-# ===================================================================
-
-# Movement
-pmap <down> pager_move down=1
-pmap <up> pager_move up=1
-pmap <left> pager_move left=4
-pmap <right> pager_move right=4
-pmap <home> pager_move to=0
-pmap <end> pager_move to=-1
-pmap <pagedown> pager_move down=1.0 pages=True
-pmap <pageup> pager_move up=1.0 pages=True
-pmap <C-d> pager_move down=0.5 pages=True
-pmap <C-u> pager_move up=0.5 pages=True
-
-copypmap <UP> k <C-p>
-copypmap <DOWN> j <C-n> <CR>
-copypmap <LEFT> h
-copypmap <RIGHT> l
-copypmap <HOME> g
-copypmap <END> G
-copypmap <C-d> d
-copypmap <C-u> u
-copypmap <PAGEDOWN> n f <C-F> <Space>
-copypmap <PAGEUP> p b <C-B>
-
-# Basic
-pmap <ESC> pager_close
-copypmap <ESC> q Q i <F3>
-pmap E edit_file
-
-# ===================================================================
-# == Taskview Keybindings
-# ===================================================================
-
-# Movement
-tmap <up> taskview_move up=1
-tmap <down> taskview_move down=1
-tmap <home> taskview_move to=0
-tmap <end> taskview_move to=-1
-tmap <pagedown> taskview_move down=1.0 pages=True
-tmap <pageup> taskview_move up=1.0 pages=True
-tmap <C-d> taskview_move down=0.5 pages=True
-tmap <C-u> taskview_move up=0.5 pages=True
-
-copytmap <UP> k <C-p>
-copytmap <DOWN> j <C-n> <CR>
-copytmap <HOME> g
-copytmap <END> G
-copytmap <C-u> u
-copytmap <PAGEDOWN> n f <C-F> <Space>
-copytmap <PAGEUP> p b <C-B>
-
-# Changing priority and deleting tasks
-tmap J eval -q fm.ui.taskview.task_move(-1)
-tmap K eval -q fm.ui.taskview.task_move(0)
-tmap dd eval -q fm.ui.taskview.task_remove()
-tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
-tmap <pageup> eval -q fm.ui.taskview.task_move(0)
-tmap <delete> eval -q fm.ui.taskview.task_remove()
-
-# Basic
-tmap <ESC> taskview_close
-copytmap <ESC> q Q w <C-c>
-#+end_src
-
-*** scope.sh
-:PROPERTIES:
-:header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
-:END:
-
-#+begin_src sh :tangle no
-# ranger supports enhanced previews. If the option "use_preview_script"
-# is set to True and this file exists, this script will be called and its
-# output is displayed in ranger. ANSI color codes are supported.
-
-# NOTES: This script is considered a configuration file. If you upgrade
-# ranger, it will be left untouched. (You must update it yourself.)
-# Also, ranger disables STDIN here, so interactive scripts won't work properly
-
-# Meanings of exit codes:
-# code | meaning | action of ranger
-# -----+------------+-------------------------------------------
-# 0 | success | success. display stdout as preview
-# 1 | no preview | failure. display no preview at all
-# 2 | plain text | display the plain content of the file
-# 3 | fix width | success. Don't reload when width changes
-# 4 | fix height | success. Don't reload when height changes
-# 5 | fix both | success. Don't ever reload
-
-# Meaningful aliases for arguments:
-path="$1" # Full path of the selected file
-width="$2" # Width of the preview pane (number of fitting characters)
-height="$3" # Height of the preview pane (number of fitting characters)
-
-maxln=200 # Stop after $maxln lines. Can be used like ls | head -n $maxln
-
-# Find out something about the file:
-mimetype=$(file --mime-type -Lb "$path")
-extension=${path##*.}
-
-# Functions:
-# runs a command and saves its output into $output. Useful if you need
-# the return value AND want to use the output in a pipe
-try() { output=$(eval '"$@"'); }
-
-# writes the output of the previouosly used "try" command
-dump() { echo "$output"; }
-
-# a common post-processing function used after most commands
-trim() { head -n "$maxln"; }
-
-# wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
-highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }
-
-case "$extension" in
- # Archive extensions:
- 7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
- rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
- try als "$path" && { dump | trim; exit 0; }
- try acat "$path" && { dump | trim; exit 3; }
- try bsdtar -lf "$path" && { dump | trim; exit 0; }
- exit 1;;
- rar)
- try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
- # PDF documents:
- pdf)
- try pdftotext -l 10 -nopgbrk -q "$path" - && \
- { dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
- # BitTorrent Files
- torrent)
- try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
- # HTML Pages:
- htm|html|xhtml)
- try w3m -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
- try lynx -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
- try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
- ;; # fall back to highlight/cat if the text browsers fail
-esac
-
-case "$mimetype" in
- # Syntax highlight for text files:
- text/* | */xml)
- try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
- # Ascii-previews of images:
- image/*)
- img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
- # Display information about media files:
- video/* | audio/*)
- exiftool "$path" && exit 5
- # Use sed to remove spaces so the output fits into the narrow window
- try mediainfo "$path" && { dump | trim | sed 's/ \+:/: /;'; exit 5; } || exit 1;;
-esac
-
-exit 1
-#+end_src
-
-** redshift
-:PROPERTIES:
-:header-args+: :tangle ~/.config/redshift.conf
-:END:
-
-#+begin_src conf
-; Global settings for redshift
-[redshift]
-; Set the day and night screen temperatures (Neutral is 6500K)
-;temp-day=5700
-;temp-night=3500
-
-;temp-day=6500
-temp-day=6200
-;temp-night=4800
-;temp-night=5000
-;temp-night=4500
-temp-night=4000
-
-; Enable/Disable a smooth transition between day and night
-; 0 will cause a direct change from day to night screen temperature.
-; 1 will gradually increase or decrease the screen temperature.
-transition=1
-
-; Set the screen brightness. Default is 1.0.
-;brightness=0.9
-; It is also possible to use different settings for day and night
-; since version 1.8.
-;brightness-day=0.7
-;brightness-night=0.4
-; Set the screen gamma (for all colors, or each color channel
-; individually)
-;gamma=0.8
-;gamma=1.0
-;gamma=0.8:0.7:0.8
-; This can also be set individually for day and night since
-; version 1.10.
-;gamma-day=0.8:0.7:0.8
-;gamma-night=0.6
-
-; Set the location-provider: 'geoclue2' or 'manual'
-; type 'redshift -l list' to see possible values.
-; The location provider settings are in a different section.
-;location-provider=manual
-location-provider=geoclue2
-
-; Set the adjustment-method: 'randr', 'vidmode'
-; type 'redshift -m list' to see all possible values.
-; 'randr' is the preferred method, 'vidmode' is an older API.
-; but works in some cases when 'randr' does not.
-; The adjustment method settings are in a different section.
-adjustment-method=randr
-
-; Configuration of the location-provider:
-; type 'redshift -l PROVIDER:help' to see the settings.
-; ex: 'redshift -l manual:help'
-; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
-; are negative numbers.
-;[manual]
-;lat=48.1
-;lon=11.6
-
-; Configuration of the adjustment-method
-; type 'redshift -m METHOD:help' to see the settings.
-; ex: 'redshift -m randr:help'
-; In this example, randr is configured to adjust screen 1.
-; Note that the numbering starts from 0, so this is actually the
-; second screen. If this option is not specified, Redshift will try
-; to adjust _all_ screens.
-;[randr]
-;screen=1
-#+end_src
-
-** rofi
-:PROPERTIES:
-:header-args+: :tangle ~/.config/rofi/config
-:END:
-
-#+begin_src conf
-rofi.font: Ubuntu Mono 13
-! rofi.font: Inconsolata 16
-! rofi.font: Iosevka 13
-! rofi.font: Source Code Pro 11
-rofi.modi: run,window
-! rofi.width: 640
-rofi.width: 600
-!rofi.location: 2
-!rofi.yoffset: 200
-rofi.monitor: -1
-!rofi.lines: 10
-
-!rofi.theme: /usr/share/rofi/themes//Arc.rasi
-!rofi.theme: /usr/share/rofi/themes//Paper.rasi
-!rofi.theme: /usr/share/rofi/themes//sidebar.rasi
-
-rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
-#+end_src
-
-** rofi-pass
-:PROPERTIES:
-:header-args+: :tangle ~/.config/rofi-pass/config
-:END:
-
-#+begin_src conf
-# permanently set alternative root dir
-# root=/path/to/root
-
-# rofi command. Make sure to have "$@" as last argument
-_rofi () {
- #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
- rofi -i -no-auto-select "$@"
-}
-
-# xdotool needs the keyboard layout to be set using setxkbmap
-# You can do this in your autostart scripts (e.g. xinitrc)
-
-# If for some reason, you cannot do this, you can set the command here.
-# and set fix_layout to true
-fix_layout=false
-
-layout_cmd () {
- setxkbmap us
-}
-
-# fields to be used
-URL_field='url'
-USERNAME_field='user'
-AUTOTYPE_field='autotype'
-
-# delay to be used for :delay keyword
-delay=2
-
-## Programs to be used
-# Editor
-EDITOR='gvim -f'
-
-# Browser
-BROWSER='chromium'
-
-## Misc settings
-
-default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
-auto_enter='false'
-notify='false'
-default_autotype='user :tab pass'
-
-# color of the help messages
-# leave empty for autodetection
-help_color="#4872FF"
-
-# Clipboard settings
-# Possible options: primary, clipboard, both
-clip=primary
-
-# Options for generating new password entries
-# default_user is also used for password files that have no user field.
-default_user=aminb
-default_user2=aminban
-password_length=30
-
-# Custom Keybindings
-#autotype="Alt+1"
-autotype="Alt+m"
-type_user="Alt+2"
-type_pass="Alt+3"
-open_url="Alt+4"
-copy_name="Alt+u"
-copy_url="Alt+l"
-copy_pass="Alt+p"
-show="Alt+o"
-copy_entry="Alt+2"
-type_entry="Alt+1"
-copy_menu="Alt+c"
-action_menu="Alt+a"
-type_menu="Alt+t"
-help="Alt+h"
-switch="Alt+x"
-insert_pass="Alt+n"
+#+begin_src conf :tangle /sudo::/etc/systemd/system/getty@tty1.service.d/noclear.conf
+[Service]
+TTYVTDisallocate=no
#+end_src
-** TLP
+* TLP
-*** TODO enigma
-*** plasma
+*** darrud
-#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/default/tlp")
+#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "darrud")) "/sudo::/etc/default/tlp")
# ------------------------------------------------------------------------------
# tlp - Parameters for power saving
# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
# governor settings or conflicts will occur.
#CPU_SCALING_GOVERNOR_ON_AC=powersave
#CPU_SCALING_GOVERNOR_ON_BAT=powersave
+CPU_SCALING_GOVERNOR_ON_AC=conservative
+CPU_SCALING_GOVERNOR_ON_BAT=conservative
# Set the min/max frequency available for the scaling governor.
# Possible values strongly depend on your CPU. For available frequencies see
#DEVICES_TO_DISABLE_ON_UNDOCK=""
#+end_src
-** X
-
-*** xprofile
-:PROPERTIES:
-:header-args+: :tangle ~/.xprofile
-:END:
-
-=~/.xprofile= is similar in style to =~/.xinitrc=, but on the
-contrary, it's automatically sourced by LightDM, my display manager of
-choice.
-
-#+begin_src sh
-xset -b # disable bell
-
-# setxkbmap -option compose:ralt
-
-setxkbmap -option ctrl:nocaps # turn capslock into control
-setxkbmap -option altwin:swap_alt_win # swap alt and super
-
-if [ $(hostname) = "plasma" ]
-then
- setxkbmap -option ctrl:rctrl_ralt # turn right control into right alt
-fi
-
-if [ $(hostname) = "enigma" ]
-then
- xmodmap -e "keycode 135 = Alt_R" # remap menu key to alt
-fi
-
-light -Scrs "intel_backlight" 2
-
-source $HOME/.zprofile
-
-export _JAVA_AWT_WM_NONREPARENTING=1
-export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
-
-# unlock-def-gk.py &
-
-if [ $(hostname) = "plasma" ]
-then
- bspwm &
-elif [ $(hostname) = "enigma" ]
-then
- emacs -ib 0 &
-fi
-#+end_src
-
-*** X resources
-
-**** Xresources
-:PROPERTIES:
-:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
-:END:
-
-#+begin_src conf-xdefaults
-#include ".Xresources.d/fonts"
-! #include ".Xresources.d/colors"
-#include ".Xresources.d/emacs"
-#include ".Xresources.d/rxvt-unicode"
-#+end_src
-
-**** Xresources.d
-
-***** fonts
-:PROPERTIES:
-:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
-:END:
-
-#+begin_src conf-xdefaults
-Xft.lcdfilter: lcddefault
-Xft.antialias: true
-Xft.autohint: 0
-Xft.hinting: true
-Xft.hintstyle: hintslight
-! Xft.hintstyle: hintfull
-Xft.rgba: rgb
-Xft.dpi: 96
-#+end_src
-
-***** colors
-:PROPERTIES:
-:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
-:END:
-
-#+begin_src conf-xdefaults :tangle no
-#include "gruvbox-light.xresources"
-! #include "gruvbox-dark.xresources"
-#include "gruvbox-urxvt256.xresources"
-#+end_src
-
-#+begin_src conf-xdefaults :tangle no
-! -----------------------------------------------------------------------------
-! File: gruvbox-light.xresources
-! Description: Retro groove colorscheme generalized
-! Author: morhetz <morhetz@gmail.com>
-! Source: https://github.com/morhetz/gruvbox-generalized
-! Last Modified: 6 Sep 2014
-! -----------------------------------------------------------------------------
-
-! hard contrast: *background: #f9f5d7
-*background: #fbf1c7
-! soft contrast: *background: #f2e5bc
-*foreground: #3c3836
-! Black + DarkGrey
-*color0: #fdf4c1
-*color8: #928374
-! DarkRed + Red
-*color1: #cc241d
-*color9: #9d0006
-! DarkGreen + Green
-*color2: #98971a
-*color10: #79740e
-! DarkYellow + Yellow
-*color3: #d79921
-*color11: #b57614
-! DarkBlue + Blue
-*color4: #458588
-*color12: #076678
-! DarkMagenta + Magenta
-*color5: #b16286
-*color13: #8f3f71
-! DarkCyan + Cyan
-*color6: #689d6a
-*color14: #427b58
-! LightGrey + White
-*color7: #7c6f64
-*color15: #3c3836
-#+end_src
-
-#+begin_src conf-xdefaults :tangle no
-! -----------------------------------------------------------------------------
-! File: gruvbox-dark.xresources
-! Description: Retro groove colorscheme generalized
-! Author: morhetz <morhetz@gmail.com>
-! Source: https://github.com/morhetz/gruvbox-generalized
-! Last Modified: 6 Sep 2014
-! -----------------------------------------------------------------------------
-
-! hard contrast: *background: #1d2021
-*background: #282828
-! soft contrast: *background: #32302f
-*foreground: #ebdbb2
-! Black + DarkGrey
-*color0: #282828
-*color8: #928374
-! DarkRed + Red
-*color1: #cc241d
-*color9: #fb4934
-! DarkGreen + Green
-*color2: #98971a
-*color10: #b8bb26
-! DarkYellow + Yellow
-*color3: #d79921
-*color11: #fabd2f
-! DarkBlue + Blue
-*color4: #458588
-*color12: #83a598
-! DarkMagenta + Magenta
-*color5: #b16286
-*color13: #d3869b
-! DarkCyan + Cyan
-*color6: #689d6a
-*color14: #8ec07c
-! LightGrey + White
-*color7: #a89984
-*color15: #ebdbb2
-#+end_src
-
-#+begin_src conf-xdefaults :tangle no
-! -----------------------------------------------------------------------------
-! File: gruvbox-urxvt256.xresources
-! Description: Retro groove colorscheme generalized
-! Author: morhetz <morhetz@gmail.com>
-! Source: https://github.com/morhetz/gruvbox-generalized
-! Last Modified: 13 Dec 2013
-! -----------------------------------------------------------------------------
-
-URxvt.color24: #076678
-URxvt.color66: #427b58
-URxvt.color88: #9d0006
-URxvt.color96: #8f3f71
-URxvt.color100: #79740e
-URxvt.color108: #8ec07c
-URxvt.color109: #83a598
-URxvt.color130: #af3a03
-URxvt.color136: #b57614
-URxvt.color142: #b8bb26
-URxvt.color167: #fb4934
-URxvt.color175: #d3869b
-URxvt.color208: #fe8019
-URxvt.color214: #fabd2f
-URxvt.color223: #ebdbb2
-URxvt.color228: #f2e5bc
-URxvt.color229: #fbf1c7
-URxvt.color230: #f9f5d7
-URxvt.color234: #1d2021
-URxvt.color235: #282828
-URxvt.color236: #32302f
-URxvt.color237: #3c3836
-URxvt.color239: #504945
-URxvt.color241: #665c54
-URxvt.color243: #7c6f64
-URxvt.color244: #928374
-URxvt.color245: #928374
-URxvt.color246: #a89984
-URxvt.color248: #bdae93
-URxvt.color250: #d5c4a1
-#+end_src
-
-***** emacs
-:PROPERTIES:
-:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
-:END:
-
-#+begin_src conf-xdefaults
-Emacs.menuBar: off
-Emacs.toolBar: off
-Emacs.verticalScrollBars: off
-Emacs.cursorBlink: off
-Emacs.FontBackend: xft,x
-! Emacs.font: Ubuntu Mono-12
-! Emacs.font: Triplicate T4C-11
-! Emacs.font: Ubuntu Mono-10.5
-! Emacs.font: Ubuntu Mono-12
-! Emacs.font: Iosevka-11
-
-! Emacs.font: Fira Mono:size=15
-! Emacs.font: DejaVu Sans Mono:size=15
-! Emacs.font: Inconsolata:size=17
-! Emacs.font: Inconsolata:size=16
-! Emacs.font: Inconsolata LGC:size=14
-! Emacs.font: Source Code Pro Medium-10.5
-Emacs.font: Ubuntu Mono:size=16
-! Emacs.font: Iosevka:size=16
-#+end_src
-
-***** rxvt-unicode
-:PROPERTIES:
-:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
-:END:
-
-#+begin_src conf-xdefaults
-! Font
-URxvt.font: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
-URxvt.boldFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
-URxvt.italicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
-URxvt.bolditalicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
-
-URxvt.xftAntialias: true
-URxvt.letterSpace: 0
-
-URxvt.depth: 0
-URxvt.loginShell: true
-URxvt.saveLines: 100000
-URxvt.internalBorder: 3
-URxvt.lineSpace: 0
-URxvt.scrollBar: false
-URxvt.scrollStyle: rxvt
-URxvt*scrollTtyOutput: false
-URxvt*scrollWithBuffer: true
-URxvt*scrollTtyKeypress: true
-URxvt.keysym.Shift-Up: command:\033]720;1\007
-URxvt.keysym.Shift-Down: command:\033]721;1\007
-
-URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select
-URxvt.perl-ext: bidi
-URxvt.bidi.enabled: 1
-URxvt.url-select.launcher: firefox
-URxvt.url-select.underline: true
-URxvt.keysym.M-u: perl:url-select:select_next
-URxvt.keysym.M-Escape: perl:keyboard-select:activate
-URxvt.keysym.M-s: perl:keyboard-select:search
-URxvt.url-launcher: /usr/bin/firefox
-URxvt.matcher.button: 1
-URxvt.iso14755: false
-URxvt.iso14755_53: false
-URxvt.keysym.M-c: perl:clipboard:copy
-URxvt.keysym.M-v: perl:clipboard:paste
-URxvt.keysym.C-A-V: perl:clipboard:paste_escaped
-URxvt.keysym.C-Up: font-size:increase
-URxvt.keysym.C-Down: font-size:decrease
-URxvt.keysym.C-S-Up: font-size:incglobal
-URxvt.keysym.C-S-Down: font-size:decglobal
-URxvt.keysym.C-equal: font-size:reset
-!URxvt.keysym.C-question: font-size:show
-
-URxvt.iconFile: /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
-
-!urxvt*foreground: white
-!urxvt*background: black
-
-!*color0: #2E3436
-!*color1: #a40000
-!*color2: #4E9A06
-!*color3: #C4A000
-!*color4: #3465A4
-!*color5: #75507B
-!*color6: #ce5c00
-!*color7: #babdb9
-!*color8: #555753
-!*color9: #EF2929
-!*color10: #8AE234
-!*color11: #FCE94F
-!*color12: #729FCF
-!*color13: #AD7FA8
-!*color14: #fcaf3e
-!*color15: #EEEEEC
-
-!URxvt.foreground: #C8C8C8
-!URxvt.background: #FFFFFF
-
-!! black
-!*color0: #2E3436
-!*color8: #555753
-!! red
-!*color1: #a40000
-!*color9: #EF2929
-!! green
-!*color2: #4E9A06
-!*color10: #8AE234
-!! yellow
-!*color3: #C4A000
-!*color11: #FCE94F
-!! blue
-!*color4: #3465A4
-!*color12: #729FCF
-!! purple
-!*color5: #75507B
-!*color13: #AD7FA8
-!! orange (replaces cyan)
-!*color6: #ce5c00
-!*color14: #fcaf3e
-!! white
-!*color7: #babdb9
-!*color15: #EEEEEC
-
-! Tango colour theme for rxvt-unicode
-URxvt.background: #FFFFFF
-URxvt.foreground: #000000
-
-! Black
-URxvt.color0: #2E3436
-URxvt.color8: #757773
-
-! Red
-URxvt.color1: #CC0000
-URxvt.color9: #EF2929
-
-! Green
-URxvt.color2: #4E9A06
-URxvt.color10: #8AE234
-
-! Yellow
-URxvt.color3: #C4A000
-URxvt.color11: #FCE94F
-
-! Blue
-URxvt.color4: #3465A4
-URxvt.color12: #729FCF
-
-! Magenta
-URxvt.color5: #75507B
-URxvt.color13: #AD7FA8
-
-!! Cyan
-!URxvt.color6: #06989A
-!URxvt.color14: #34E2E2
-! orange (replaces cyan)
-*color6: #ce5c00
-*color14: #fcaf3e
-
-! White
-URxvt.color7: #D3D7CF
-URxvt.color15: #EEEEEC
-#+end_src
-
-** XDG
-:PROPERTIES:
-:header-args+: :tangle ~/.config/user-dirs.dirs
-:END:
-
-#+begin_src conf
-XDG_DESKTOP_DIR="$HOME/Desktop"
-XDG_DOCUMENTS_DIR="$HOME/usr/docs"
-XDG_DOWNLOAD_DIR="$HOME/usr/dls"
-XDG_MUSIC_DIR="$HOME/usr/music"
-XDG_PICTURES_DIR="$HOME/usr/pics"
-XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
-XDG_TEMPLATES_DIR="$HOME/usr/Templates"
-XDG_VIDEOS_DIR="$HOME/usr/vids"
-#+end_src
-
-** Zathura
-:PROPERTIES:
-:header-args+: :tangle ~/.config/zathura/zathurarc
-:END:
-
-#+begin_src conf
-set smooth-scroll true
-set selection-clipboard clipboard
-set zoom-step 05
-set default-bg "#272727"
-set statusbar-bg "#272727"
-set inputbar-bg "#373737"
-#+end_src
-
-** Zsh
-
-My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
-[[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
-installed.
-
-*** zimrc
-:PROPERTIES:
-:header-args+: :tangle ~/.zimrc
-:END:
-
-#+begin_src sh
-
-
-#################
-# CORE SETTINGS #
-#################
-
-#
-# Zim settings
-#
-
-# Select what modules you would like enabled.
-# The second line of modules may depend on options set by modules in the first
-# line. These dependencies are noted on the respective module's README.md.
-zmodules=(directory environment git git-info history input ssh utility custom \
- syntax-highlighting history-substring-search prompt completion)
-
-
-###################
-# MODULE SETTINGS #
-###################
-
-#
-# Prompt
-#
-
-# Set your desired prompt here
-zprompt_theme='pure'
-#PURE_PROMPT_SYMBOL=λ
-#PURE_PROMPT_SYMBOL=δ
-PURE_PROMPT_SYMBOL=➜
-
-#
-# Completion
-#
-
-# set an optional host-specific filename for the completion cache file
-# if none is provided, the default '.zcompdump' is used.
-#zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
-
-#
-# Utility
-#
-
-# Uncomment to enable command correction prompts
-# See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
-setopt CORRECT
-
-#
-# Environment
-#
-
-# Set the string below to the desired terminal title format string.
-# The terminal title is redrawn upon directory change, however, variables like
-# ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
-# http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
-# The example below uses the following format: 'username@host:/current/directory'
-ztermtitle='%n@%m:%~'
-
-#
-# Input
-#
-
-# Uncomment to enable double-dot expansion.
-# This appends '../' to your input for each '.' you type after an initial '..'
-#zdouble_dot_expand='true'
-
-#
-# Syntax-Highlighting
-#
-
-# This determines what highlighters will be used with the syntax-highlighting module.
-# Documentation of the highlighters can be found here:
-# https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
-# For (u)rxvt, termite and gnome-terminal users,
-# removing the 'cursor' highlighter will fix the disappearing cursor problem
-#zhighlighters=(main brackets cursor)
-zhighlighters=(main brackets pattern)
-
-
-#
-# SSH
-#
-
-# Load these ssh identities with the ssh module
-zssh_ids=(id_rsa plasma_id_rsa id_ed25519 id_rsa_aur)
-
-
-#
-# Pacman
-#
-
-# Set (optional) pacman front-end.
-zpacman_frontend='yay'
-
-# Load any helper scripts as defined here
-#zpacman_helper=(aur)
-#+end_src
-
-*** zlogin
-:PROPERTIES:
-:header-args+: :tangle ~/.zlogin
-:END:
-
-#+begin_src sh
-
-
-#
-# User configuration sourced by login shells
-#
-
-# Initialize zim
-[[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
-#+end_src
-
-*** zprofile
-:PROPERTIES:
-:header-args+: :tangle ~/.zprofile
-:END:
-
-#+begin_src sh
-#PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
-#PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
-export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
-export XDG_CONFIG_HOME=$HOME/.config
-export XDG_DATA_HOME=$HOME/.local/share
-export XDG_DATA_DIRS=/usr/local/share:/usr/share
-export MAILDIR="$HOME/mail"
-export CVS_RSH=ssh
-#export MATHMODELS=$HOME/src/eiffel/mathmodels
-#export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
-#export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
-
-# Eiffel2Java stuff
-#export JAVA_HOME=/usr/lib/jvm/default
-#export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
-#export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
-#export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
-
-#export PATH="$HOME/usr/build/pvs:$PATH"
-#export SBCLISP_HOME=/usr/share/sbcl-source
-#export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
-
-export MOZ_USE_XINPUT2=1 # precise scrolling in firefox
-
-#export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
-#export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
-
-#if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
-#+end_src
-
-*** zshenv
-:PROPERTIES:
-:header-args+: :tangle ~/.zshenv
-:END:
-
-#+begin_src sh
-# Ensure that a non-login, non-interactive shell has a defined environment.
-if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
- source "${ZDOTDIR:-$HOME}/.zprofile"
-fi
-#+end_src
-
-*** zshrc
-:PROPERTIES:
-:header-args+: :tangle ~/.zshrc
-:END:
-
-#+begin_src sh
-# Bash-like navigation
-#export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
-#export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
-export WORDCHARS='*?[]~=&;!#$%^(){}<>'
-#ZLE_SPACE_SUFFIX_CHARS=$'|&'
-
-#disable -r time # disable shell reserved word
-#alias time='time -p' # -p for POSIX output
-
-# rehash if last command was pacaur or pacman
-# (so that zsh picks up changes in $PATH immediately)
-TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
-
-#
-# User configuration sourced by interactive shells
-#
-
-# Change default zim location
-export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
-
-# Start zim
-[[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
-
-ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
-#ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
-
-setopt globdots
-
-source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
-source ~/.zsh/zsh-autopair/autopair.zsh
-
-
-### fzf ###
-
-source /usr/share/fzf/key-bindings.zsh
-source /usr/share/fzf/completion.zsh
-
-# Accept history selection instead of putting it on
-# the command line
-fzf-history-widget-accept() {
- fzf-history-widget
- zle accept-line
-}
-#zle -N fzf-history-widget-accept
-#bindkey '^R' fzf-history-widget-accept
-
-# alt+c preview
-export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
-
-### fzf ###
-
-
-# aliases
-alias mpv="mpv --ytdl-format mp4"
-alias mv="mv -iv"
-alias cp="cp -iv"
-alias scl=systemctl
-alias jcl=journalctl
-alias m="mbsync -Va; getmail; notmuch new"
-alias best="youtube-dl -f best"
-alias ace="mosh amin@ace.aminb.org"
-alias nix="ssh amin@aminb.org"
-
-aur() {
- cd ~/usr/build
- git clone https://aur.archlinux.org/${1}.git
- cd ${1}
-}
-
-# i-beam cursor
-echo -e "\033[5 q"
-#echo -e "\033[6 q"
-#+end_src
-
-* Scripts
-
-This section contains various useful scripts and the ones used by the
-programs above. For instance, =toggle-tablet= for switching to and
-from tablet mode on my X220T, =toggle-presentation-mode= for toggling
-Xfce's presentation mode which keeps the screen awake, and
-=rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
-exact brightness value.
-
-** rofi-light
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
-:END:
-
-#+begin_src bash
-cur=$(light -G)
-val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 12)
-light -S $val
-#+end_src
-
-** toggle-layout
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
-:END:
-
-#+begin_src bash
-lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
-
-if [ "$lang" = "us" ]; then
- setxkbmap ir
-else
- setxkbmap us
- # xmodmap $HOME/.Xmodmap
-fi
-#+end_src
-
-** toggle-presentation-mode
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
-:END:
-
-#+begin_src bash
-xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
-#+end_src
-
-** unlock-def-gk.py
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
-:END:
-
-#+begin_src python
-import gnomekeyring as gk
-# list_item_ids_sync('login')[0] == 1L
-gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
-#+end_src
-
-** wp
-
-My little wallpaper changer script.
-
-*** wp
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
-:END:
-
-#+begin_src bash :tangle no
-export DISPLAY=:0
-
-case "$1" in
- "day")
- feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
- ;;
- "night")
- feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
- ;;
- *)
- echo $"Usage: $0 {day|night}"
- exit 1
-esac
-#+end_src
-
-*** wp-auto
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
-:END:
-
-#+begin_src bash :tangle no
-SED=$(which sed)
-ROFI=$(which rofi)
-
-export DISPLAY=:0
-HOUR=$(date +%H)
-
-if [ -z "${SED}" ]
-then
- echo "Did not find 'sed', script cannot continue."
- exit 1
-fi
-if [ -z "${ROFI}" ]
-then
- echo "Did not find rofi, there is no point to continue."
- exit 1
-fi
-
-###
-# Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
-# Repeated calls should leave the config clean-ish
-###
-function set_theme()
-{
- CDIR="${HOME}/.config/rofi/"
- if [ ! -d "${CDIR}" ]
- then
- mkdir -p ${CDIR}
- fi
- if [ -f "${CDIR}/config" ]
- then
- ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
- fi
- echo "rofi.theme: ${1}" >> "${CDIR}/config"
-
-}
-
-if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
- then
- feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
- xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
- set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
- else
- feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
- xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
- set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
-fi
-#+end_src
-
-*** wp.service
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/wp.service
-:END:
-
-#+begin_src conf :tangle no
-[Unit]
-Description=wallpaper service
-
-[Service]
-Type=oneshot
-ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
-#+end_src
-
-*** wp.timer
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/wp.timer
-:END:
-
-#+begin_src conf :tangle no
-[Unit]
-[Unit]
-Description=wallpaper timer
-
-[Timer]
-OnCalendar=07,21:00
-Unit=wp.service
-Persistent=true
-
-[Install]
-WantedBy=timers.target
-#+end_src
-
-** zathura-sync.sh
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
-:END:
-
-#+begin_src sh
-pos="$1"
-pdffile="$2"
-zathura --synctex-forward "$pos" "$pdffile" || \
- (
- zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
- sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
-#+end_src
-** Fun :)
-
-*** eat-em
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
-:END:
-
-#+begin_src sh
-# Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
-# [ESC] character in original post removed here.
-
-# ANSI Color -- use these variables to easily have different color
-# and format output. Make sure to output the reset sequence after
-# colors (f = foreground, b = background), and use the 'off'
-# feature for anything you turn on.
-
-initializeANSI()
-{
- esc="$(echo -en '\e')"
-
- blackf="${esc}[30m"; redf="${esc}[31m"; greenf="${esc}[32m"
- yellowf="${esc}[33m" bluef="${esc}[34m"; purplef="${esc}[35m"
- cyanf="${esc}[36m"; whitef="${esc}[37m"
-
- blackb="${esc}[40m"; redb="${esc}[41m"; greenb="${esc}[42m"
- yellowb="${esc}[43m" blueb="${esc}[44m"; purpleb="${esc}[45m"
- cyanb="${esc}[46m"; whiteb="${esc}[47m"
-
- boldon="${esc}[1m"; boldoff="${esc}[22m"
- italicson="${esc}[3m"; italicsoff="${esc}[23m"
- ulon="${esc}[4m"; uloff="${esc}[24m"
- invon="${esc}[7m"; invoff="${esc}[27m"
-
- reset="${esc}[0m"
-}
-
-# note in this first use that switching colors doesn't require a reset
-# first - the new color overrides the old one.
-
-#clear
-
-initializeANSI
-
-cat << EOF
-
- ${yellowf} ▄███████▄${reset} ${redf} ▄██████▄${reset} ${greenf} ▄██████▄${reset} ${bluef} ▄██████▄${reset} ${purplef} ▄██████▄${reset} ${cyanf} ▄██████▄${reset}
- ${yellowf}▄█████████▀▀${reset} ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset} ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset} ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset} ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset} ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
- ${yellowf}███████▀${reset} ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset} ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset} ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset} ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset} ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
- ${yellowf}███████▄${reset} ${redf}████████████${reset} ${greenf}████████████${reset} ${bluef}████████████${reset} ${purplef}████████████${reset} ${cyanf}████████████${reset}
- ${yellowf}▀█████████▄▄${reset} ${redf}██▀██▀▀██▀██${reset} ${greenf}██▀██▀▀██▀██${reset} ${bluef}██▀██▀▀██▀██${reset} ${purplef}██▀██▀▀██▀██${reset} ${cyanf}██▀██▀▀██▀██${reset}
- ${yellowf} ▀███████▀${reset} ${redf}▀ ▀ ▀ ▀${reset} ${greenf}▀ ▀ ▀ ▀${reset} ${bluef}▀ ▀ ▀ ▀${reset} ${purplef}▀ ▀ ▀ ▀${reset} ${cyanf}▀ ▀ ▀ ▀${reset}
-
- ${boldon}${yellowf} ▄███████▄ ${redf} ▄██████▄ ${greenf} ▄██████▄ ${bluef} ▄██████▄ ${purplef} ▄██████▄ ${cyanf} ▄██████▄${reset}
- ${boldon}${yellowf}▄█████████▀▀ ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄ ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄ ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄ ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄ ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
- ${boldon}${yellowf}███████▀ ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███ ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███ ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███ ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███ ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
- ${boldon}${yellowf}███████▄ ${redf}████████████ ${greenf}████████████ ${bluef}████████████ ${purplef}████████████ ${cyanf}████████████${reset}
- ${boldon}${yellowf}▀█████████▄▄ ${redf}██▀██▀▀██▀██ ${greenf}██▀██▀▀██▀██ ${bluef}██▀██▀▀██▀██ ${purplef}██▀██▀▀██▀██ ${cyanf}██▀██▀▀██▀██${reset}
- ${boldon}${yellowf} ▀███████▀ ${redf}▀ ▀ ▀ ▀ ${greenf}▀ ▀ ▀ ▀ ${bluef}▀ ▀ ▀ ▀ ${purplef}▀ ▀ ▀ ▀ ${cyanf}▀ ▀ ▀ ▀${reset}
-
-EOF
-#+end_src
-
-*** invade-em
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
-:END:
-
-#+begin_src bash
-#
-# ANSI color scheme script featuring Space Invaders
-#
-# Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
-# Modified by lolilolicon
-#
-
-f=3 b=4
-for j in f b; do
- for i in {0..7}; do
- printf -v $j$i %b "\e[${!j}${i}m"
- done
-done
-bld=$'\e[1m'
-rst=$'\e[0m'
-
-cat << EOF
-
- $f1 ▀▄ ▄▀ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4 ▀▄ ▄▀ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
- $f1 ▄█▀███▀█▄ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4 ▄█▀███▀█▄ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
- $f1█▀███████▀█ $f2▀▀███▀▀███▀▀ $f3▀█▀██▀█▀ $f4█▀███████▀█ $f5▀▀███▀▀███▀▀ $f6▀█▀██▀█▀$rst
- $f1▀ ▀▄▄ ▄▄▀ ▀ $f2 ▀█▄ ▀▀ ▄█▀ $f3▀▄ ▄▀ $f4▀ ▀▄▄ ▄▄▀ ▀ $f5 ▀█▄ ▀▀ ▄█▀ $f6▀▄ ▄▀$rst
-
- $bld$f1▄ ▀▄ ▄▀ ▄ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4▄ ▀▄ ▄▀ ▄ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
- $bld$f1█▄█▀███▀█▄█ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4█▄█▀███▀█▄█ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
- $bld$f1▀█████████▀ $f2▀▀▀██▀▀██▀▀▀ $f3▀▀█▀▀█▀▀ $f4▀█████████▀ $f5▀▀▀██▀▀██▀▀▀ $f6▀▀█▀▀█▀▀$rst
- $bld$f1 ▄▀ ▀▄ $f2▄▄▀▀ ▀▀ ▀▀▄▄ $f3▄▀▄▀▀▄▀▄ $f4 ▄▀ ▀▄ $f5▄▄▀▀ ▀▀ ▀▀▄▄ $f6▄▀▄▀▀▄▀▄$rst
-
-
- $f7▌$rst
-
- $f7▌$rst
-
- $f7 ▄█▄ $rst
- $f7▄█████████▄$rst
- $f7▀▀▀▀▀▀▀▀▀▀▀$rst
-
-EOF
-#+end_src
projects / ~bandali / configs / blobdiff