;; This file is loaded by Spacemacs at startup.
;; It must be stored in your home directory.
-;; Configuration Layers
-;; --------------------
+(defun dotspacemacs/layers ()
+ "Configuration Layers declaration.
+You should not put any user code in this function besides modifying the variable
+values."
+ (setq-default
+ ;; Base distribution to use. This is a layer contained in the directory
+ ;; `+distribution'. For now available distributions are `spacemacs-base'
+ ;; or `spacemacs'. (default 'spacemacs)
+ dotspacemacs-distribution 'spacemacs
+ ;; Lazy installation of layers (i.e. layers are installed only when a file
+ ;; with a supported type is opened). Possible values are `all', `unused'
+ ;; and `nil'. `unused' will lazy install only unused layers (i.e. layers
+ ;; not listed in variable `dotspacemacs-configuration-layers'), `all' will
+ ;; lazy install any layer that support lazy installation even the layers
+ ;; listed in `dotspacemacs-configuration-layers'. `nil' disable the lazy
+ ;; installation feature and you have to explicitly list a layer in the
+ ;; variable `dotspacemacs-configuration-layers' to install it.
+ ;; (default 'unused)
+ dotspacemacs-enable-lazy-installation 'unused
+ ;; If non-nil then Spacemacs will ask for confirmation before installing
+ ;; a layer lazily. (default t)
+ dotspacemacs-ask-for-lazy-installation t
+ ;; If non-nil layers with lazy install support are lazy installed.
+ ;; List of additional paths where to look for configuration layers.
+ ;; Paths must have a trailing slash (i.e. `~/.mycontribs/')
+ dotspacemacs-configuration-layer-path '()
+ ;; List of configuration layers to load.
+ dotspacemacs-configuration-layers
+ '(
+ aminb
+ auto-completion
+ (better-defaults :variables
+ better-defaults-move-to-beginning-of-code-first t
+ better-defaults-move-to-end-of-code-first t)
+ bibtex
+ c-c++
+ emacs-lisp
+ git
+ haskell
+ html
+ ;; idris
+ ivy
+ ;; javascript
+ latex
+ markdown
+ org
+ ;; python
+ ;; racket
+ ;; rust
+ (shell :variables
+ shell-default-height 30
+ shell-default-position 'bottom)
+ shell-scripts
+ spell-checking
+ syntax-checking
+ ;; version-control
+ ;; yaml
+ )
+ ;; List of additional packages that will be installed without being
+ ;; wrapped in a layer. If you need some configuration for these
+ ;; packages, then consider creating a layer. You can also put the
+ ;; configuration in `dotspacemacs/user-config'.
+ dotspacemacs-additional-packages '()
+ ;; A list of packages that cannot be updated.
+ dotspacemacs-frozen-packages '()
+ ;; A list of packages that will not be installed and loaded.
+ dotspacemacs-excluded-packages '()
+ ;; Defines the behaviour of Spacemacs when installing packages.
+ ;; Possible values are `used-only', `used-but-keep-unused' and `all'.
+ ;; `used-only' installs only explicitly used packages and uninstall any
+ ;; unused packages as well as their unused dependencies.
+ ;; `used-but-keep-unused' installs only the used packages but won't uninstall
+ ;; them if they become unused. `all' installs *all* packages supported by
+ ;; Spacemacs and never uninstall them. (default is `used-only')
+ dotspacemacs-install-packages 'used-only))
-(setq-default
- ;; List of additional paths where to look for configuration layers.
- ;; Paths must have a trailing slash (ie. `~/.mycontribs/')
- dotspacemacs-configuration-layer-path '()
- ;; List of configuration layers to load.
- dotspacemacs-configuration-layers '(mu4e evil git haskell c-c++ auctex)
- ;; A list of packages and/or extensions that will not be install and loaded.
- dotspacemacs-excluded-packages '()
-)
+(defun dotspacemacs/init ()
+ "Initialization function.
+This function is called at the very startup of Spacemacs initialization
+before layers configuration.
+You should not put any user code in there besides modifying the variable
+values."
+ ;; This setq-default sexp is an exhaustive list of all the supported
+ ;; spacemacs settings.
+ (setq-default
+ ;; If non-nil ELPA repositories are contacted via HTTPS whenever it's
+ ;; possible. Set it to nil if you have no way to use HTTPS in your
+ ;; environment, otherwise it is strongly recommended to let it set to t.
+ ;; This variable has no effect if Emacs is launched with the parameter
+ ;; `--insecure' which forces the value of this variable to nil.
+ ;; (default t)
+ dotspacemacs-elpa-https t
+ ;; Maximum allowed time in seconds to contact an ELPA repository.
+ dotspacemacs-elpa-timeout 5
+ ;; If non-nil then spacemacs will check for updates at startup
+ ;; when the current branch is not `develop'. Note that checking for
+ ;; new versions works via git commands, thus it calls GitHub services
+ ;; whenever you start Emacs. (default nil)
+ dotspacemacs-check-for-update nil
+ ;; If non-nil, a form that evaluates to a package directory. For example, to
+ ;; use different package directories for different Emacs versions, set this
+ ;; to `emacs-version'.
+ dotspacemacs-elpa-subdirectory nil
+ ;; One of `vim', `emacs' or `hybrid'.
+ ;; `hybrid' is like `vim' except that `insert state' is replaced by the
+ ;; `hybrid state' with `emacs' key bindings. The value can also be a list
+ ;; with `:variables' keyword (similar to layers). Check the editing styles
+ ;; section of the documentation for details on available variables.
+ ;; (default 'vim)
+ dotspacemacs-editing-style 'emacs
+ ;; If non-nil output loading progress in `*Messages*' buffer. (default nil)
+ dotspacemacs-verbose-loading nil
+ ;; Specify the startup banner. Default value is `official', it displays
+ ;; the official spacemacs logo. An integer value is the index of text
+ ;; banner, `random' chooses a random text banner in `core/banners'
+ ;; directory. A string value must be a path to an image format supported
+ ;; by your Emacs build.
+ ;; If the value is nil then no banner is displayed. (default 'official)
+ dotspacemacs-startup-banner 'official
+ ;; List of items to show in startup buffer or an association list of
+ ;; the form `(list-type . list-size)`. If nil then it is disabled.
+ ;; Possible values for list-type are:
+ ;; `recents' `bookmarks' `projects' `agenda' `todos'."
+ ;; List sizes may be nil, in which case
+ ;; `spacemacs-buffer-startup-lists-length' takes effect.
+ dotspacemacs-startup-lists '((recents . 5)
+ (projects . 7))
+ ;; True if the home buffer should respond to resize events.
+ dotspacemacs-startup-buffer-responsive t
+ ;; Default major mode of the scratch buffer (default `text-mode')
+ dotspacemacs-scratch-mode 'text-mode
+ ;; List of themes, the first of the list is loaded when spacemacs starts.
+ ;; Press <SPC> T n to cycle to the next theme in the list (works great
+ ;; with 2 themes variants, one dark and one light)
+ dotspacemacs-themes '(spacemacs-dark
+ spacemacs-light)
+ ;; If non-nil the cursor color matches the state color in GUI Emacs.
+ dotspacemacs-colorize-cursor-according-to-state t
+ ;; Default font, or prioritized list of fonts. `powerline-scale' allows to
+ ;; quickly tweak the mode-line size to make separators look not too crappy.
+ dotspacemacs-default-font '("Inconsolata"
+ :size 15
+ :weight normal
+ :width normal
+ :powerline-scale 1.6)
+ ;; The leader key
+ dotspacemacs-leader-key "SPC"
+ ;; The key used for Emacs commands (M-x) (after pressing on the leader key).
+ ;; (default "SPC")
+ dotspacemacs-emacs-command-key "SPC"
+ ;; The key used for Vim Ex commands (default ":")
+ dotspacemacs-ex-command-key ":"
+ ;; The leader key accessible in `emacs state' and `insert state'
+ ;; (default "M-m")
+ dotspacemacs-emacs-leader-key "S-SPC"
+ ;; Major mode leader key is a shortcut key which is the equivalent of
+ ;; pressing `<leader> m`. Set it to `nil` to disable it. (default ",")
+ dotspacemacs-major-mode-leader-key ","
+ ;; Major mode leader key accessible in `emacs state' and `insert state'.
+ ;; (default "C-M-m")
+ dotspacemacs-major-mode-emacs-leader-key "M-SPC"
+ ;; These variables control whether separate commands are bound in the GUI to
+ ;; the key pairs C-i, TAB and C-m, RET.
+ ;; Setting it to a non-nil value, allows for separate commands under <C-i>
+ ;; and TAB or <C-m> and RET.
+ ;; In the terminal, these pairs are generally indistinguishable, so this only
+ ;; works in the GUI. (default nil)
+ dotspacemacs-distinguish-gui-tab nil
+ ;; If non-nil `Y' is remapped to `y$' in Evil states. (default nil)
+ dotspacemacs-remap-Y-to-y$ nil
+ ;; If non-nil, the shift mappings `<' and `>' retain visual state if used
+ ;; there. (default t)
+ dotspacemacs-retain-visual-state-on-shift t
+ ;; If non-nil, J and K move lines up and down when in visual mode.
+ ;; (default nil)
+ dotspacemacs-visual-line-move-text nil
+ ;; If non-nil, inverse the meaning of `g' in `:substitute' Evil ex-command.
+ ;; (default nil)
+ dotspacemacs-ex-substitute-global nil
+ ;; Name of the default layout (default "Default")
+ dotspacemacs-default-layout-name "Default"
+ ;; If non-nil the default layout name is displayed in the mode-line.
+ ;; (default nil)
+ dotspacemacs-display-default-layout nil
+ ;; If non-nil then the last auto saved layouts are resume automatically upon
+ ;; start. (default nil)
+ dotspacemacs-auto-resume-layouts nil
+ ;; Size (in MB) above which spacemacs will prompt to open the large file
+ ;; literally to avoid performance issues. Opening a file literally means that
+ ;; no major mode or minor modes are active. (default is 1)
+ dotspacemacs-large-file-size 1
+ ;; Location where to auto-save files. Possible values are `original' to
+ ;; auto-save the file in-place, `cache' to auto-save the file to another
+ ;; file stored in the cache directory and `nil' to disable auto-saving.
+ ;; (default 'cache)
+ dotspacemacs-auto-save-file-location 'cache
+ ;; Maximum number of rollback slots to keep in the cache. (default 5)
+ dotspacemacs-max-rollback-slots 5
+ ;; If non-nil, `helm' will try to minimize the space it uses. (default nil)
+ dotspacemacs-helm-resize nil
+ ;; if non-nil, the helm header is hidden when there is only one source.
+ ;; (default nil)
+ dotspacemacs-helm-no-header nil
+ ;; define the position to display `helm', options are `bottom', `top',
+ ;; `left', or `right'. (default 'bottom)
+ dotspacemacs-helm-position 'bottom
+ ;; Controls fuzzy matching in helm. If set to `always', force fuzzy matching
+ ;; in all non-asynchronous sources. If set to `source', preserve individual
+ ;; source settings. Else, disable fuzzy matching in all sources.
+ ;; (default 'always)
+ dotspacemacs-helm-use-fuzzy 'always
+ ;; If non-nil the paste micro-state is enabled. When enabled pressing `p`
+ ;; several times cycle between the kill ring content. (default nil)
+ dotspacemacs-enable-paste-transient-state nil
+ ;; Which-key delay in seconds. The which-key buffer is the popup listing
+ ;; the commands bound to the current keystroke sequence. (default 0.4)
+ dotspacemacs-which-key-delay 0.4
+ ;; Which-key frame position. Possible values are `right', `bottom' and
+ ;; `right-then-bottom'. right-then-bottom tries to display the frame to the
+ ;; right; if there is insufficient space it displays it at the bottom.
+ ;; (default 'bottom)
+ dotspacemacs-which-key-position 'bottom
+ ;; Control where `switch-to-buffer' displays the buffer. If nil,
+ ;; `switch-to-buffer' displays the buffer in the current window even if
+ ;; another same-purpose window is available. If non-nil, `switch-to-buffer'
+ ;; displays the buffer in a same-purpose window even if the buffer can be
+ ;; displayed in the current window. (default nil)
+ dotspacemacs-switch-to-buffer-prefers-purpose nil
+ ;; If non-nil a progress bar is displayed when spacemacs is loading. This
+ ;; may increase the boot time on some systems and emacs builds, set it to
+ ;; nil to boost the loading time. (default t)
+ dotspacemacs-loading-progress-bar t
+ ;; If non-nil the frame is fullscreen when Emacs starts up. (default nil)
+ ;; (Emacs 24.4+ only)
+ dotspacemacs-fullscreen-at-startup nil
+ ;; If non-nil `spacemacs/toggle-fullscreen' will not use native fullscreen.
+ ;; Use to disable fullscreen animations in OSX. (default nil)
+ dotspacemacs-fullscreen-use-non-native nil
+ ;; If non-nil the frame is maximized when Emacs starts up.
+ ;; Takes effect only if `dotspacemacs-fullscreen-at-startup' is nil.
+ ;; (default nil) (Emacs 24.4+ only)
+ dotspacemacs-maximized-at-startup nil
+ ;; A value from the range (0..100), in increasing opacity, which describes
+ ;; the transparency level of a frame when it's active or selected.
+ ;; Transparency can be toggled through `toggle-transparency'. (default 90)
+ dotspacemacs-active-transparency 90
+ ;; A value from the range (0..100), in increasing opacity, which describes
+ ;; the transparency level of a frame when it's inactive or deselected.
+ ;; Transparency can be toggled through `toggle-transparency'. (default 90)
+ dotspacemacs-inactive-transparency 90
+ ;; If non-nil show the titles of transient states. (default t)
+ dotspacemacs-show-transient-state-title t
+ ;; If non-nil show the color guide hint for transient state keys. (default t)
+ dotspacemacs-show-transient-state-color-guide t
+ ;; If non-nil unicode symbols are displayed in the mode line. (default t)
+ dotspacemacs-mode-line-unicode-symbols t
+ ;; If non-nil smooth scrolling (native-scrolling) is enabled. Smooth
+ ;; scrolling overrides the default behavior of Emacs which recenters point
+ ;; when it reaches the top or bottom of the screen. (default t)
+ dotspacemacs-smooth-scrolling t
+ ;; If non-nil line numbers are turned on in all `prog-mode' and `text-mode'
+ ;; derivatives. If set to `relative', also turns on relative line numbers.
+ ;; (default nil)
+ dotspacemacs-line-numbers nil
+ ;; Code folding method. Possible values are `evil' and `origami'.
+ ;; (default 'evil)
+ dotspacemacs-folding-method 'evil
+ ;; If non-nil smartparens-strict-mode will be enabled in programming modes.
+ ;; (default nil)
+ dotspacemacs-smartparens-strict-mode nil
+ ;; If non-nil pressing the closing parenthesis `)' key in insert mode passes
+ ;; over any automatically added closing parenthesis, bracket, quote, etc…
+ ;; This can be temporary disabled by pressing `C-q' before `)'. (default nil)
+ dotspacemacs-smart-closing-parenthesis nil
+ ;; Select a scope to highlight delimiters. Possible values are `any',
+ ;; `current', `all' or `nil'. Default is `all' (highlight any scope and
+ ;; emphasis the current one). (default 'all)
+ dotspacemacs-highlight-delimiters 'all
+ ;; If non-nil, advise quit functions to keep server open when quitting.
+ ;; (default nil)
+ dotspacemacs-persistent-server nil
+ ;; List of search tool executable names. Spacemacs uses the first installed
+ ;; tool of the list. Supported tools are `rg', `ag', `pt', `ack' and `grep'.
+ ;; (default '("rg" "ag" "pt" "ack" "grep"))
+ dotspacemacs-search-tools '("rg" "ag" "pt" "ack" "grep")
+ ;; The default package repository used if no explicit repository has been
+ ;; specified with an installed package.
+ ;; Not used for now. (default nil)
+ dotspacemacs-default-package-repository nil
+ ;; Delete whitespace while saving buffer. Possible values are `all'
+ ;; to aggressively delete empty line and long sequences of whitespace,
+ ;; `trailing' to delete only the whitespace at end of lines, `changed'to
+ ;; delete only whitespace for changed lines or `nil' to disable cleanup.
+ ;; (default nil)
+ dotspacemacs-whitespace-cleanup nil
+ ))
-;; Settings
-;; --------
+(defun dotspacemacs/user-init ()
+ "Initialization function for user code.
+It is called immediately after `dotspacemacs/init', before layer configuration
+executes.
+ This function is mostly useful for variables that need to be set
+before packages are loaded. If you are unsure, you should try in setting them in
+`dotspacemacs/user-config' first."
+ )
-(setq-default
- ;; Specify the startup banner. If the value is an integer then the
- ;; banner with the corresponding index is used, if the value is `random'
- ;; then the banner is chosen randomly among the available banners, if
- ;; the value is nil then no banner is displayed.
- dotspacemacs-startup-banner 001
- ;; List of themes, the first of the list is loaded when spacemacs starts.
- ;; Press <SPC> T n to cycle to the next theme in the list (works great
- ;; with 2 themes variants, one dark and one light)
- dotspacemacs-themes '(solarized-light solarized-dark)
- ;; The leader key
- dotspacemacs-leader-key "SPC"
- ;; Major mode leader key is a shortcut key which is the equivalent of
- ;; pressing `<leader> m`
- dotspacemacs-major-mode-leader-key ","
- ;; The command key used for Evil commands (ex-commands) and
- ;; Emacs commands (M-x).
- ;; By default the command key is `:' so ex-commands are executed like in Vim
- ;; with `:' and Emacs commands are executed with `<leader> :'.
- dotspacemacs-command-key ":"
- ;; Guide-key delay in seconds. The Guide-key is the popup buffer listing
- ;; the commands bound to the current keystrokes.
- dotspacemacs-guide-key-delay 0.4
- ;; If non nil the frame is fullscreen when Emacs starts up (Emacs 24.4+ only).
- dotspacemacs-fullscreen-at-startup nil
- ;; If non nil `spacemacs/toggle-fullscreen' will not use native fullscreen.
- ;; Use to disable fullscreen animations in OSX."
- dotspacemacs-fullscreen-use-non-native nil
- ;; If non nil the frame is maximized when Emacs starts up (Emacs 24.4+ only).
- ;; Takes effect only if `dotspacemacs-fullscreen-at-startup' is nil.
- dotspacemacs-maximized-at-startup nil
- ;; A value from the range (0..100), in increasing opacity, which describes the
- ;; transparency level of a frame when it's active or selected. Transparency can
- ;; be toggled through `toggle-transparency'.
- dotspacemacs-active-transparency 90
- ;; A value from the range (0..100), in increasing opacity, which describes the
- ;; transparency level of a frame when it's inactive or deselected. Transparency
- ;; can be toggled through `toggle-transparency'.
- dotspacemacs-inactive-transparency 90
- ;; If non nil unicode symbols are displayed in the mode line (e.g. for lighters)
- dotspacemacs-mode-line-unicode-symbols t
- ;; If non nil smooth scrolling (native-scrolling) is enabled. Smooth scrolling
- ;; overrides the default behavior of Emacs which recenters the point when
- ;; it reaches the top or bottom of the screen
- dotspacemacs-smooth-scrolling t
- ;; If non-nil smartparens-strict-mode will be enabled in programming modes.
- dotspacemacs-smartparens-strict-mode nil
- ;; If non nil advises quit functions to keep server open when quitting.
- dotspacemacs-persistent-server nil
- ;; The default package repository used if no explicit repository has been
- ;; specified with an installed package.
- ;; Not used for now.
- dotspacemacs-default-package-repository nil
- )
+(defun dotspacemacs/user-config ()
+ "Configuration function for user code.
+This function is called at the very end of Spacemacs initialization after
+layers configuration.
+This is the place where most of your configurations should be done. Unless it is
+explicitly specified that a variable should be set before a package is loaded,
+you should place your code here."
-;; Initialization Hooks
-;; --------------------
+ (setq powerline-default-separator 'slant)
-(defun dotspacemacs/init ()
- "User initialization for Spacemacs. This function is called at the very
- startup."
- )
+ ;; (setq magit-commit-arguments '("--signoff"
+ ;; "--gpg-sign=4E05246AB0BF7FFB"))
-(defun dotspacemacs/config ()
- "This is were you can ultimately override default Spacemacs configuration.
-This function is called at the very end of Spacemacs initialization."
- (setq powerline-default-separator nil)
+ (setq undo-tree-auto-save-history t
+ undo-tree-history-directory-alist
+ `(("." . ,(concat spacemacs-cache-directory "undo"))))
+ (unless (file-exists-p (concat spacemacs-cache-directory "undo"))
+ (make-directory (concat spacemacs-cache-directory "undo")))
+
+ ;; Use pdflatex instead of latex
(setq TeX-PDF-mode t
- Tex-command-default 'TeX)
-)
+ TeX-engine 'xetex)
-;; Custom variables
-;; ----------------
+ ;; Support zathura in TeX mode
+ (setq TeX-view-program-selection
+ '(((output-dvi style-pstricks)
+ "dvips and gv")
+ (output-dvi "xdvi")
+ (output-pdf "zathura")
+ (output-html "xdg-open")))
+ (setq TeX-view-program-list
+ '(("zathura"
+ ("zathura" (mode-io-correlate "-sync.sh")
+ " "
+ (mode-io-correlate "%n:1:%t ")
+ "%o"))))
-;; Do not write anything in this section. This is where Emacs will
-;; auto-generate custom variable definitions.
+ ;; Swap : and ;
+ ;; (define-key evil-motion-state-map ";" 'evil-ex)
+ ;; (define-key evil-motion-state-map ":" 'evil-repeat-find-char)
+ ;; Use emacs mode for eshell
+ ;; (evil-set-initial-state 'eshell-mode 'emacs)
+ )
+;; Do not write anything past this comment. This is where Emacs will
+;; auto-generate custom variable definitions.
+(defun dotspacemacs/emacs-custom-settings ()
+ "Emacs custom settings.
+This is an auto-generated function, do not modify its content directly, use
+Emacs customize menu instead.
+This function is called at the very end of Spacemacs initialization."
(custom-set-variables
;; custom-set-variables was added by Custom.
;; If you edit it by hand, you could mess it up, so be careful.
;; Your init file should contain only one such instance.
;; If there is more than one, they won't work right.
- '(ac-ispell-requires 4)
- '(ahs-case-fold-search nil)
- '(ahs-default-range (quote ahs-range-whole-buffer))
- '(ahs-idle-interval 0.25)
- '(ahs-idle-timer 0 t)
- '(ahs-inhibit-face-list nil)
- '(ring-bell-function (quote ignore) t)
- '(send-mail-function (quote smtpmail-send-it)))
+ '(package-selected-packages
+ (quote
+ (mu4e-maildirs-extension mu4e-alert ht znc xterm-color ws-butler writeroom-mode window-numbering which-key wgrep web-mode volatile-highlights vi-tilde-fringe uuidgen use-package toc-org tagedit spacemacs-theme spaceline smex smeargle slim-mode shell-pop scss-mode sass-mode restart-emacs request rainbow-delimiters quelpa pug-mode popwin persp-mode pcre2el paradox orgit org-ref org-projectile org-present org-pomodoro org-plus-contrib org-download org-bullets open-junk-file neotree mwim multi-term move-text mmm-mode markdown-toc magit-gitflow macrostep lorem-ipsum linum-relative link-hint less-css-mode ivy-purpose ivy-hydra intero insert-shebang info+ indent-guide ido-vertical-mode hungry-delete htmlize hlint-refactor hl-todo hindent highlight-parentheses highlight-numbers highlight-indentation hide-comnt help-fns+ helm-make haskell-snippets google-translate golden-ratio gnuplot gitignore-mode gitconfig-mode gitattributes-mode git-timemachine git-messenger git-link gh-md flyspell-correct-ivy flycheck-pos-tip flycheck-haskell flx-ido fish-mode fill-column-indicator fancy-battery eyebrowse expand-region exec-path-from-shell evil-visualstar evil-visual-mark-mode evil-unimpaired evil-tutor evil-surround evil-search-highlight-persist evil-numbers evil-nerd-commenter evil-mc evil-matchit evil-magit evil-lisp-state evil-indent-plus evil-iedit-state evil-exchange evil-escape evil-ediff evil-args evil-anzu eval-sexp-fu eshell-z eshell-prompt-extras esh-help erc-yt erc-view-log erc-social-graph erc-image erc-hl-nicks emmet-mode elisp-slime-nav dumb-jump disaster define-word crux counsel-projectile company-web company-statistics company-shell company-ghci company-ghc company-cabal company-c-headers company-auctex column-enforce-mode cmm-mode cmake-mode clean-aindent-mode clang-format auto-yasnippet auto-highlight-symbol auto-dictionary auto-compile auctex-latexmk aggressive-indent adaptive-wrap ace-window ace-link ac-ispell))))
(custom-set-faces
;; custom-set-faces was added by Custom.
;; If you edit it by hand, you could mess it up, so be careful.
;; Your init file should contain only one such instance.
;; If there is more than one, they won't work right.
)
+)
projects / ~bandali / configs / blobdiff