X-Git-Url: https://git.shemshak.org/gitweb.cgi/~bandali/configs/blobdiff_plain/1656853a6c9fbabe5c97b348f8b0b6615a1ea8b7..0d78df2f86cf87faccb5c815564a37537e1d3753:/rc.org?ds=inline diff --git a/rc.org b/rc.org index 287345c..535cca6 100644 --- a/rc.org +++ b/rc.org @@ -14,47 +14,6 @@ Note: This file is best viewed inside Emacs with org mode. This section contains the configuration files (dotfiles) of various programs I use. -** [[https://github.com/afewmail/afew][afew]] -:PROPERTIES: -:header-args+: :tangle ~/.config/afew/config -:END: - -#+begin_quote -an initial tagging script for notmuch mail -#+end_quote - -#+begin_src conf -# This is the default filter chain -[SpamFilter] -#[ClassifyingFilter] -[KillThreadsFilter] -#[ListMailsFilter] -[ArchiveSentMailsFilter] -sent_tag = sent -[InboxFilter] - -#[Filter.1] -#query = 'folder:amin/lists/.haskell-cafe' -#tags = +lists;+lists/haskell-cafe -#message = lists/haskell-cafe - -#[Filter.2] -#query = 'folder:amin/lists/.haskell-weekly' -#tags = +lists;+lists/haskell-weekly -#message = lists/haskell-weekly - -#[Filter.3] -#query = 'folder:amin/lists/.hackernewsletter' -#tags = +lists;+lists/hackernewsletter -#message = lists/hackernewsletter - - -#[FolderNameFilter] -#folder_blacklist = Inbox -#maildir_separator = /. -#folder_transforms = Drafts:draft Junk:spam Trash:deleted Sent:sent Archive:archive lists/haskell-cafe:lists/haskell-cafe -#+end_src - ** bspwm *** bspwmrc @@ -62,11 +21,11 @@ sent_tag = sent :header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh" :END: -#+begin_src sh +#+begin_src sh :tangle no sxhkd & sh ~/.fehbg & xfce4-panel -d & -#compton & +compton & sleep 0.5 && pasystray --notify=all & bspc monitor -d I II III IV V VI VII VIII IX X @@ -85,7 +44,7 @@ bspc config gapless_monocle true bspc config click_to_focus button1 bspc config directional_focus_tightness low -bspc rule -a Firefox desktop='^1' follow=on +#bspc rule -a Firefox desktop='^1' follow=on bspc rule -a Nightly desktop='^1' follow=on bspc rule -a Emacs desktop='^2' state=tiled follow=on #bspc rule -a Chromium desktop='^4' follow=on @@ -126,7 +85,7 @@ bspc rule -a Zathura state=tiled :header-args+: :tangle ~/.config/sxhkd/sxhkdrc :END: -#+begin_src conf +#+begin_src conf :tangle no # # wm independent hotkeys # @@ -177,6 +136,9 @@ XF86Audio{Raise,Lower}Volume XF86AudioMute pamixer --toggle-mute +XF86AudioMicMute + pactl set-source-mute 1 toggle + # playback control XF86Audio{Play,Prev,Next} mpc {toggle,prev,next} @@ -204,6 +166,9 @@ super + apostrophe #XF86KbdBrightness{Up,Down} # kbdlight {up,down} +XF86RotateWindows + toggle-tablet + # # bspwm hotkeys # @@ -323,7 +288,7 @@ super + {Left,Down,Up,Right} :header-args+: :tangle ~/.config/compton.conf :END: -#+begin_src conf +#+begin_src conf :tangle no # Shadow shadow = false; # Enabled client-side shadows on windows. no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows. @@ -623,7 +588,7 @@ timeout = 0 ** Fontconfig :PROPERTIES: -:header-args+: :tangle ~/.config/fontconfig/fonts.conf +:header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none :END: #+begin_src xml @@ -660,13 +625,71 @@ timeout = 0 Helvetica - + Liberation Sans - + #+end_src +** getmail + +*** getmailrc +:PROPERTIES: +:header-args+: :tangle ~/.getmail/getmailrc +:END: + +#+begin_src conf +[retriever] +type = SimplePOP3SSLRetriever +server = fencepost.gnu.org +username = aminb +password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg") +port = 995 +use_apop = True + +[destination] +type = Maildir +path = ~/mail/gnu/Inbox/ + +[options] +delete = True +#+end_src + +*** getmail.service +:PROPERTIES: +:header-args+: :tangle ~/.config/systemd/user/getmail.service +:END: + +#+begin_src conf :tangle no +[Unit] +Description=getmail service + +[Service] +Type=oneshot +ExecStart=/usr/bin/getmail +StandardOutput=syslog +StandardError=syslog +#+end_src + +*** getmail.timer +:PROPERTIES: +:header-args+: :tangle ~/.config/systemd/user/getmail.timer +:END: + +#+begin_src conf :tangle no +[Unit] +Description=getmail timer + +[Timer] +OnCalendar=*:0/30 +Persistent=true +Unit=getmail.service + +[Install] +WantedBy=timers.target +#+end_src + ** Git *** gitconfig @@ -678,14 +701,14 @@ timeout = 0 #+begin_src conf [user] name = Amin Bandali - email = amin@aminb.org - # signingkey = 4E05246AB0BF7FFB + email = bandali@gnu.org + signingkey = BE6273738E616D6D1B3A08E8A21A020248816103 #+end_src **** signing #+begin_src conf -# [commit] -# gpgsign = true +[commit] + gpgsign = true # [format] # signoff = true #+end_src @@ -721,6 +744,8 @@ timeout = 0 pr = pull --rebase ps = push psf = push --force + nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f" + nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f" #+end_src **** color @@ -753,6 +778,16 @@ timeout = 0 user = aminb #+end_src +**** send-email +#+begin_src conf +[sendemail] + smtpuser = aminb + smtpserver = fencepost.gnu.org + smtpserverport = 587 + smtpencryption = tls + annotate = yes +#+end_src + *** gitignore :PROPERTIES: :header-args+: :tangle ~/.gitignore_global @@ -768,83 +803,6 @@ timeout = 0 *-autoloads.el #+end_src -** Latexmk -:PROPERTIES: -:header-args+: :tangle ~/.latexmkrc -:END: - -#+begin_src conf -$pdf_previewer = "start zathura %O %S"; -$clean_ext = "aux out"; - -# $pdf_update_method = 4; -# $pdf_update_command = "zathura %O %S"; - -# Synctex allows one to jump to from the PDF in Zathura to the source in Emacs -# by Ctrl+click in the PDF. -# Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex -# editor. -# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S'; -#+end_src - -** getmail - -*** getmailrc -:PROPERTIES: -:header-args+: :tangle ~/.getmail/getmailrc -:END: - -#+begin_src conf -[retriever] -type = SimplePOP3SSLRetriever -server = fencepost.gnu.org -username = aminb -password_command = ("gpg2", "--no-tty", "-q", "-d", "~/.passwd/gnu.gpg") -port = 995 -use_apop = True - -[destination] -type = Maildir -path = ~/mail/gnu/Inbox/ - -[options] -delete = True -#+end_src - -*** getmail.service -:PROPERTIES: -:header-args+: :tangle ~/.config/systemd/user/getmail.service -:END: - -#+begin_src conf :tangle no -[Unit] -Description=getmail service - -[Service] -Type=oneshot -ExecStart=/usr/bin/getmail -StandardOutput=syslog -StandardError=syslog -#+end_src - -*** getmail.timer -:PROPERTIES: -:header-args+: :tangle ~/.config/systemd/user/getmail.timer -:END: - -#+begin_src conf :tangle no -[Unit] -Description=getmail timer - -[Timer] -OnCalendar=*:0/30 -Persistent=true -Unit=getmail.service - -[Install] -WantedBy=timers.target -#+end_src - ** GnuPG :PROPERTIES: :header-args+: :tangle ~/.gnupg/gpg-agent.conf @@ -893,6 +851,132 @@ gtk-font-name = Ubuntu 10 # gtk-key-theme-name = Emacs #+end_src +** [[https://github.com/Leinnan/i3gs][i3gs]] +:PROPERTIES: +:header-args+: :tangle ~/.config/i3gs/config +:END: + +#+begin_src conf :comments none :tangle no +borders_width=0 0 2 0 +separator_width=10 + +#[mpd] +#preset=MPD +#title=  +#borders_color=#7FDBFF + +[ram] +preset=RAM +title=  +borders_color=#3D9970 + +#[cpu] +#preset=CPU +#title=  +#borders_color=#2ECC40 + +#[hdd] +#preset=HDD +#title=  +#borders_color=#01FF70 + +[volume] +command=volume-info +title= +borders_color=#7FDBFF + +[battery] +preset=BAT +command=battery-percentage-time +title=  +borders_color=#39CCCC + +[wifi] +preset=WIFI +title=  +borders_color=#01FF70 + +[date] +preset=DATE +command=date '+%-I:%M, %a %b %d ' +title=  +borders_color=#FFDC00 +separator_width=0 +#+end_src + +** i3status +:PROPERTIES: +:header-args+: :tangle ~/.config/i3status/config +:END: + +#+begin_src conf :comments none +# i3status configuration file. +# see "man i3status" for documentation. + +# It is important that this file is edited as UTF-8. +# The following line should contain a sharp s: +# ß +# If the above line is not correctly displayed, fix your editor first! + +general { + colors = true + interval = 5 +} + +# order += "ipv6" +order += "disk /" +order += "disk /data" +order += "wireless _first_" +order += "ethernet _first_" +order += "battery 0" +order += "volume master" +order += "load" +order += "tztime local" + +wireless _first_ { + format_up = "W:%quality %essid %ip" + format_down = "W: down" +} + +ethernet _first_ { + # if you use %speed, i3status requires root privileges + format_up = "E: %ip (%speed)" + format_down = "E: down" +} + +battery 0 { + format = "%status %percentage %remaining (%consumption)" + path = "/sys/class/power_supply/BAT%d/uevent" + low_threshold = "10" + threshold_type = "percentage" + last_full_capacity = true + integer_battery_capacity = true + hide_seconds = true +} + +tztime local { + format = "%-I:%M%P %a %b %d" +} + +volume master { + format = "♪ %volume" + format_muted = "🔇 %volume" + device = "pulse" +} + +load { + format = "%1min" +} + +disk "/" { + format = "/ %avail" +} + +disk "/data" { + format = "/data %avail" +} +#+end_src + ** isync *** mbsyncrc @@ -983,6 +1067,42 @@ Unit=mbsync.service WantedBy=timers.target #+end_src +** Latexmk +:PROPERTIES: +:header-args+: :tangle ~/.latexmkrc +:END: + +#+begin_src conf +$pdf_previewer = "start zathura %O %S"; +$clean_ext = "aux out"; + +# $pdf_update_method = 4; +# $pdf_update_command = "zathura %O %S"; + +# Synctex allows one to jump to from the PDF in Zathura to the source in Emacs +# by Ctrl+click in the PDF. +# Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex +# editor. +# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S'; +#+end_src + +** libinput + +Improve XPS 15 9560's touchpad experience. + +# begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf") +#+begin_src conf :tangle no +Section "InputClass" + Identifier "libinput touchpad catchall" + Driver "libinput" + MatchIsTouchpad "on" + Option "ClickMethod" "clickfinger" + Option "NaturalScrolling" "true" + Option "Tapping" "on" + Option "TappingButtonMap" "lrm" +EndSection +#+end_src + ** mpd :PROPERTIES: :header-args+: :tangle ~/.config/mpd/mpd.conf @@ -1415,7 +1535,8 @@ logfile ~/.msmtp.log # aminb account aminb host nix.aminb.org -tls_fingerprint BB:98:B3:02:83:B0:E0:C3:49:3E:C2:B2:A8:60:62:78:03:B3:5D:B3:BD:B8:0A:39:BB:E4:B0:66:D1:CF:D1:6B +# use `msmtp -a aminb --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint +tls_fingerprint 98:C7:F0:02:7F:2B:D8:B6:D3:BF:E8:C1:D4:07:6B:B5:6C:B1:C7:5D:97:20:70:88:AB:9E:B5:09:5D:2C:DC:8E tls_starttls on from amin@aminb.org user amin@aminb.org @@ -1424,12 +1545,17 @@ passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg # gnu account gnu host fencepost.gnu.org -tls_fingerprint 94:0E:37:EB:EA:44:5A:4B:B6:6F:16:3D:6C:7E:7E:44:2D:93:61:C1:FE:82:A8:29:5E:3C:12:4E:2D:BE:0E:2C +# use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint +tls_fingerprint 34:60:91:B5:71:5B:76:87:50:F3:83:13:26:0F:EE:75:42:83:93:9A:E2:AF:1E:87:72:02:C9:61:CE:28:1B:8E tls_starttls on from aminb@gnu.org user aminb passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg +# gnu (bandali) +account gnu-bandali : gnu +from bandali@gnu.org + # uwaterloo account uwaterloo host connect.uwaterloo.ca @@ -1439,10 +1565,6 @@ user abandali passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg tls_trust_file /etc/ssl/certs/ca-certificates.crt -# uwaterloo (friendly address) -account uwaterloo-friendly : uwaterloo -from amin.bandali@uwaterloo.ca - # Set a default account account default : aminb #+end_src @@ -2065,7 +2187,7 @@ path=/home/amin/mail [user] name=Amin Bandali primary_email=amin@aminb.org -other_email=amin.bandali@uwaterloo.ca;mbandali@uwaterloo.ca;aminb@gnu.org; +other_email=bandali@gnu.org;abandali@uwaterloo.ca; # Configuration for "notmuch new" # @@ -2084,7 +2206,7 @@ other_email=amin.bandali@uwaterloo.ca;mbandali@uwaterloo.ca;aminb@gnu.org; [new] tags=new; #tags=unread;inbox; -ignore=.uidvalidity;.mbsyncstate +ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/ # Search configuration # @@ -2133,23 +2255,84 @@ synchronize_flags=true gpg_path=gpg #+end_src +*** pre-new hook +:PROPERTIES: +:header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh" +:END: + +#+begin_src sh +touch /tmp/gnusieve.log +sieve-filter -eW -o postmaster_address=postmaster@aminb.org \ + -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log +#+end_src + *** post-new hook :PROPERTIES: :header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh" :END: #+begin_src sh -afew -tn +# apply sent tag to messages sent by me +notmuch tag -new +sent -- from:amin@aminb.org or from:bandali@gnu.org or from:aminb@gnu.org or from:amin@gnu.org or from:mab@gnu.org or from:abandali@uwaterloo.ca + +# initial tagging +notmuch tag -latest -- tag:latest +notmuch tag +inbox +unread +latest -new -- tag:new + # apply tags to lists -notmuch tag +lists +lists/deepspec -- folder:amin/lists/deepspec -notmuch tag +lists +lists/haskell-cafe -- folder:amin/lists/haskell-cafe -notmuch tag +lists +lists/haskell-weekly -- folder:amin/lists/haskell-weekly -notmuch tag +lists +lists/hackernewsletter -- folder:amin/lists/hackernewsletter -notmuch tag +lists +lists/notmuch -- folder:amin/lists/notmuch -notmuch tag +lists +lists/info-gnu-emacs -- folder:amin/lists/info-gnu-emacs -notmuch tag +lists +lists/help-gnu-emacs -- folder:amin/lists/help-gnu-emacs -notmuch tag +lists +lists/emacs-devel -- folder:amin/lists/emacs-devel + +# +notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter +notmuch tag -inbox +lists/haskell-weekly -- folder:amin/lists/haskell-weekly + +notmuch tag -inbox +pay -- folder:amin/pay +notmuch tag -inbox +banking -- folder:amin/banking +notmuch tag -inbox +work -- folder:amin/work +# + +# +notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136 +notmuch tag -inbox +uw/cs846 -- folder:uwaterloo/lists/cs846 +notmuch tag -inbox +uw/ece750 -- folder:uwaterloo/lists/ece750 +notmuch tag -inbox +uw/se212 -- folder:uwaterloo/lists/se212 +notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463 + +notmuch tag -inbox +lists/alloytools -- folder:uwaterloo/lists/alloytools +notmuch tag -inbox +lists/clvsingle -- folder:uwaterloo/lists/Clvsingle +notmuch tag -inbox +lists/gsa -- folder:uwaterloo/lists/GSA +notmuch tag -inbox +lists/math-grad -- folder:uwaterloo/lists/Math-grad +notmuch tag -inbox +lists/scs-grads -- folder:uwaterloo/lists/scs-grads +notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students +# + +# +notmuch tag -inbox +l/emacs-devel -- folder:gnu/l/emacs-devel +notmuch tag -inbox +l/emacs-orgmode -- folder:gnu/l/emacs-orgmode +notmuch tag -inbox +l/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss +notmuch tag -inbox +l/fencepost-users -- folder:gnu/l/fencepost-users +notmuch tag -inbox +l/guix-devel -- folder:gnu/l/guix-devel +notmuch tag -inbox +l/guile-devel -- folder:gnu/l/guile-devel +notmuch tag -inbox +l/help-gnu-emacs -- folder:gnu/l/help-gnu-emacs +notmuch tag -inbox +l/info-gnu-emacs -- folder:gnu/l/info-gnu-emacs +notmuch tag -inbox +l/www-commits -- folder:gnu/l/www-commits +notmuch tag -inbox +l/www-discuss -- folder:gnu/l/www-discuss +notmuch tag -inbox +webmasters -- folder:gnu/webmasters + +notmuch tag -inbox +l/deepspec -- folder:gnu/l/deepspec +notmuch tag -inbox +l/haskell-cafe -- folder:gnu/l/haskell-cafe +notmuch tag -inbox +l/haskell-art -- folder:gnu/l/haskell-art +notmuch tag -inbox +l/notmuch -- folder:gnu/l/notmuch + +notmuch tag -inbox +l/~aminb/test-priv -- folder:gnu/l/~aminb/test-priv +notmuch tag -inbox +l/~sircmpwn/sr.ht-admins -- folder:gnu/l/~sircmpwn/sr.ht-admins +notmuch tag -inbox +l/~sircmpwn/sr.ht-announce -- folder:gnu/l/~sircmpwn/sr.ht-announce +notmuch tag -inbox +l/~sircmpwn/sr.ht-dev -- folder:gnu/l/~sircmpwn/sr.ht-dev +notmuch tag -inbox +l/~sircmpwn/sr.ht-discuss -- folder:gnu/l/~sircmpwn/sr.ht-discuss +# + +notmuch tag -inbox -unread +archive/notmuch -- path:archive/notmuch/** +notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/** #+end_src *** notmuch.service @@ -2280,6 +2463,69 @@ def prime_gpg_agent(): prime_gpg_agent() #+end_src +** pigeonhole +*** gnu.sieve +:PROPERTIES: +:header-args+: :tangle ~/sieve/gnu.sieve :comments none +:END: + +#+begin_src conf +require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags", "include" ]; + +if anyof ( + address :is "from" "webmasters@gnu.org", + address :is "from" "webmasters-comment@gnu.org") { + fileinto :create "webmasters"; + stop; +} + +include :personal "lists"; +#+end_src + +*** lists.sieve +:PROPERTIES: +:header-args+: :tangle ~/sieve/lists.sieve :comments none +:END: + +#+begin_src conf +require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags", + "include" ]; + +if anyof ( + header :contains "list-id" "", + header :contains "list-id" "", + header :contains "list-id" "", + header :contains "list-id" "", + header :contains "list-id" "", + header :contains "list-id" "", + header :contains "list-id" "", + header :contains "list-id" "", + header :contains "list-id" "", + header :contains "list-id" "", + header :contains "list-id" "", + header :contains "list-id" "", + header :contains "list-id" "", + header :contains "list-id" "") { + if header :regex "list-id" "<([a-z_0-9-]+)[.@]" { + set :lower "listname" "${1}"; + fileinto :create "l/${listname}"; + } +} + +if anyof ( + header :contains "list-id" "<~aminb/test-priv@lists.sr.ht>", + header :contains "list-id" "<~sircmpwn/sr.ht-admins@lists.sr.ht>", + header :contains "list-id" "<~sircmpwn/sr.ht-announce@lists.sr.ht>", + header :contains "list-id" "<~sircmpwn/sr.ht-dev@lists.sr.ht>", + header :contains "list-id" "<~sircmpwn/sr.ht-discuss@lists.sr.ht>") { + if header :regex "list-id" "(~[a-z_0-9-]+)/([a-z_0-9.-]+)@" { + set :lower "username" "${1}"; + set :lower "listname" "${2}"; + fileinto :create "l/${username}/${listname}"; + } +} +#+end_src + ** polybar *** config @@ -2669,10 +2915,10 @@ margin-bottom = 0 *** polybar-launch :PROPERTIES: -:header-args+: :tangle ~/.local/bin/polybar-launch +:header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh" :END: -#+begin_src sh :shebang "#!/bin/sh" :tangle no +#+begin_src sh :tangle no # Terminate already running bar instances killall -q polybar @@ -2685,6 +2931,23 @@ polybar main & echo "Bars launched..." #+end_src +** PowerTOP +:PROPERTIES: +:header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service" +:END: + +#+begin_src conf +[Unit] +Description=Powertop tunings + +[Service] +ExecStart=/usr/bin/powertop --auto-tune +RemainAfterExit=true + +[Install] +WantedBy=multi-user.target +#+end_src + ** ranger *** rc.conf @@ -3227,10 +3490,10 @@ copytmap q Q w *** scope.sh :PROPERTIES: -:header-args+: :tangle ~/.config/ranger/scope.sh +:header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh" :END: -#+begin_src sh :shebang "#!/bin/sh" :tangle no +#+begin_src sh :tangle no # ranger supports enhanced previews. If the option "use_preview_script" # is set to True and this file exists, this script will be called and its # output is displayed in ranger. ANSI color codes are supported. @@ -3316,15 +3579,1828 @@ esac exit 1 #+end_src -* Scripts +** redshift +:PROPERTIES: +:header-args+: :tangle ~/.config/redshift.conf :comments none +:END: -This section contains various useful scripts and the ones used by the -programs above. For instance, =toggle-tablet= for switching to and -from tablet mode on my X220T, =toggle-presentation-mode= for toggling -Xfce's presentation mode which keeps the screen awake, and -=rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an +#+begin_src conf +; Global settings for redshift +[redshift] +; Set the day and night screen temperatures (Neutral is 6500K) +;temp-day=5700 +;temp-night=3500 + +;temp-day=6500 +temp-day=6200 +;temp-night=4800 +;temp-night=5000 +;temp-night=4500 +temp-night=4000 + +; Enable/Disable a smooth transition between day and night +; 0 will cause a direct change from day to night screen temperature. +; 1 will gradually increase or decrease the screen temperature. +transition=1 + +; Set the screen brightness. Default is 1.0. +;brightness=0.9 +; It is also possible to use different settings for day and night +; since version 1.8. +;brightness-day=0.7 +;brightness-night=0.4 +; Set the screen gamma (for all colors, or each color channel +; individually) +;gamma=0.8 +;gamma=1.0 +;gamma=0.8:0.7:0.8 +; This can also be set individually for day and night since +; version 1.10. +;gamma-day=0.8:0.7:0.8 +;gamma-night=0.6 + +; Set the location-provider: 'geoclue2' or 'manual' +; type 'redshift -l list' to see possible values. +; The location provider settings are in a different section. +;location-provider=manual +location-provider=geoclue2 + +; Set the adjustment-method: 'randr', 'vidmode' +; type 'redshift -m list' to see all possible values. +; 'randr' is the preferred method, 'vidmode' is an older API. +; but works in some cases when 'randr' does not. +; The adjustment method settings are in a different section. +adjustment-method=randr + +; Configuration of the location-provider: +; type 'redshift -l PROVIDER:help' to see the settings. +; ex: 'redshift -l manual:help' +; Keep in mind that longitudes west of Greenwich (e.g. the Americas) +; are negative numbers. +;[manual] +;lat=48.1 +;lon=11.6 + +; Configuration of the adjustment-method +; type 'redshift -m METHOD:help' to see the settings. +; ex: 'redshift -m randr:help' +; In this example, randr is configured to adjust screen 1. +; Note that the numbering starts from 0, so this is actually the +; second screen. If this option is not specified, Redshift will try +; to adjust _all_ screens. +;[randr] +;screen=1 +#+end_src + +** rofi +:PROPERTIES: +:header-args+: :tangle ~/.config/rofi/config +:END: + +#+begin_src conf +! rofi.font: Ubuntu Mono 13 +! rofi.font: Inconsolata 16 +! rofi.font: Iosevka 13 +! rofi.font: Source Code Pro 11 +rofi.font: Source Code Pro 10.5 +rofi.modi: run,window +! rofi.width: 640 +rofi.width: 600 +!rofi.location: 2 +!rofi.yoffset: 200 +rofi.monitor: -1 +!rofi.lines: 10 + +!rofi.theme: /usr/share/rofi/themes//Arc.rasi +!rofi.theme: /usr/share/rofi/themes//Paper.rasi +!rofi.theme: /usr/share/rofi/themes//sidebar.rasi + +rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi +#+end_src + +** rofi-pass +:PROPERTIES: +:header-args+: :tangle ~/.config/rofi-pass/config +:END: + +#+begin_src conf +# permanently set alternative root dir +# root=/path/to/root + +# rofi command. Make sure to have "$@" as last argument +_rofi () { + #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@" + rofi -i -no-auto-select -kb-accept-entry "!Return" "$@" +} + +# xdotool needs the keyboard layout to be set using setxkbmap +# You can do this in your autostart scripts (e.g. xinitrc) + +# If for some reason, you cannot do this, you can set the command here. +# and set fix_layout to true +fix_layout=false + +layout_cmd () { + setxkbmap us +} + +# fields to be used +URL_field='url' +USERNAME_field='user' +AUTOTYPE_field='autotype' + +# delay to be used for :delay keyword +delay=2 + +## Programs to be used +# Editor +EDITOR='gvim -f' + +# Browser +BROWSER='chromium' + +## Misc settings + +default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl +auto_enter='false' +notify='false' +default_autotype='user :tab pass' + +# color of the help messages +# leave empty for autodetection +help_color="#4872FF" + +# Clipboard settings +# Possible options: primary, clipboard, both +clip=primary + +# Options for generating new password entries +# default_user is also used for password files that have no user field. +default_user=aminb +default_user2=aminban +password_length=30 + +# Custom Keybindings +#autotype="Alt+1" +autotype="Alt+m" +type_user="Alt+2" +type_pass="Alt+3" +open_url="Alt+4" +copy_name="Alt+u" +copy_url="Alt+l" +copy_pass="Alt+p" +show="Alt+o" +copy_entry="Alt+2" +type_entry="Alt+1" +copy_menu="Alt+c" +action_menu="Alt+a" +type_menu="Alt+t" +help="Alt+h" +switch="Alt+x" +insert_pass="Alt+n" +#+end_src + +** sway + +*** main +:PROPERTIES: +:header-args+: :tangle ~/.config/sway/config +:END: + +#+begin_src conf +exec xrdb .Xresources +exec dunst +exec pgrep -x "systemd-inhibit" || \ + systemd-inhibit --what=handle-power-key --who=aminb \ + --why="Handle power button in sway" sleep infinity + +### Variables +# super +set $mod Mod4 +# alt +set $mod2 Mod1 +set $left h +set $down j +set $up k +set $right l +set $term urxvt +set $menu rofi -show run -display-run '> ' -display-window ' 🗔 ' + +### Output configuration +# +# Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/) +output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill +# +# Example configuration: +# +# output HDMI-A-1 resolution 1920x1080 position 1920,0 +# +# You can get the names of your outputs by running: swaymsg -t get_outputs + +### Idle configuration + +exec swayidle \ + timeout 120 'swaymsg "output * dpms off"' \ + resume 'swaymsg "output * dpms on"' \ + before-sleep swaylock + + +### Key bindings +# +# Basics: +# + # start a terminal + bindsym $mod+Return exec $term + + # kill focused window + bindsym $mod+Shift+q kill + + # start your launcher + bindsym $mod+d exec $menu + + # password manager + bindsym $mod2+space exec rofi-pass + + # Drag floating windows by holding down $mod and left mouse button. + # Resize them with right mouse button + $mod. + # Despite the name, also works for non-floating windows. + # Change normal to inverse to use left mouse button for resizing and right + # mouse button for dragging. + floating_modifier $mod normal + + # reload the configuration file + bindsym $mod+Shift+c reload + + # exit sway (logs you out of your wayland session) + bindsym $mod+Shift+e exit + + bindsym $mod+apostrophe exec rofi-light # rofi-based brightness chooser + bindsym XF86MonBrightnessUp exec light -A 5 # increase screen brightness + bindsym XF86MonBrightnessDown exec light -U 5 # decrease screen brightness + + bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5 + bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5 + bindsym XF86AudioMute exec pamixer --toggle-mute + bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle + + # original sway workspace switch and window move + bindsym $mod+bracketleft workspace prev + bindsym $mod+bracketright workspace next + bindsym $mod+braceleft move container to workspace prev + bindsym $mod+braceright move container to workspace next + + # bspwm-esque workspace switch and window move + bindsym $mod2+bracketleft exec sway-ws-util switch prev + bindsym $mod2+bracketright exec sway-ws-util switch next + bindsym $mod2+braceleft exec sway-ws-util move prev follow + bindsym $mod2+braceright exec sway-ws-util move next follow +# +# Moving around: +# + # Move your focus around + bindsym $mod+$left focus left + bindsym $mod+$down focus down + bindsym $mod+$up focus up + bindsym $mod+$right focus right + # or use $mod+[up|down|left|right] + bindsym $mod+Left focus left + bindsym $mod+Down focus down + bindsym $mod+Up focus up + bindsym $mod+Right focus right + + # _move_ the focused window with the same, but add Shift + bindsym $mod+Shift+$left move left + bindsym $mod+Shift+$down move down + bindsym $mod+Shift+$up move up + bindsym $mod+Shift+$right move right + # ditto, with arrow keys + bindsym $mod+Shift+Left move left + bindsym $mod+Shift+Down move down + bindsym $mod+Shift+Up move up + bindsym $mod+Shift+Right move right +# +# Workspaces: +# + # switch to workspace + bindsym $mod+1 workspace 1 + bindsym $mod+2 workspace 2 + bindsym $mod+3 workspace 3 + bindsym $mod+4 workspace 4 + bindsym $mod+5 workspace 5 + bindsym $mod+6 workspace 6 + bindsym $mod+7 workspace 7 + bindsym $mod+8 workspace 8 + bindsym $mod+9 workspace 9 + bindsym $mod+0 workspace 10 + # move focused container to workspace + bindsym $mod+Shift+1 move container to workspace 1 + bindsym $mod+Shift+2 move container to workspace 2 + bindsym $mod+Shift+3 move container to workspace 3 + bindsym $mod+Shift+4 move container to workspace 4 + bindsym $mod+Shift+5 move container to workspace 5 + bindsym $mod+Shift+6 move container to workspace 6 + bindsym $mod+Shift+7 move container to workspace 7 + bindsym $mod+Shift+8 move container to workspace 8 + bindsym $mod+Shift+9 move container to workspace 9 + bindsym $mod+Shift+0 move container to workspace 10 + # Note: workspaces can have any name you want, not just numbers. + # We just use 1-10 as the default. +# +# Layout stuff: +# + # You can "split" the current object of your focus with + # $mod+b or $mod+v, for horizontal and vertical splits + # respectively. + bindsym $mod+b splith + bindsym $mod+v splitv + + # Switch the current container between different layout styles + bindsym $mod+s layout stacking + bindsym $mod+w layout tabbed + bindsym $mod+e layout toggle split + + # Make the current focus fullscreen + bindsym $mod+f fullscreen + + # Toggle the current focus between tiling and floating mode + bindsym $mod+Shift+space floating toggle + + # Swap focus between the tiling area and the floating area + bindsym $mod+space focus mode_toggle + + # move focus to the parent container + bindsym $mod+a focus parent +# +# Scratchpad: +# + # Sway has a "scratchpad", which is a bag of holding for windows. + # You can send windows there and get them back later. + + # Move the currently focused window to the scratchpad + bindsym $mod+Shift+minus move scratchpad + + # Show the next scratchpad window or hide the focused scratchpad window. + # If there are multiple scratchpad windows, this command cycles through them. + bindsym $mod+minus scratchpad show +# +# Resizing containers: +# +mode "resize" { + # left will shrink the containers width + # right will grow the containers width + # up will shrink the containers height + # down will grow the containers height + bindsym $left resize shrink width 10px + bindsym $down resize grow height 10px + bindsym $up resize shrink height 10px + bindsym $right resize grow width 10px + + # ditto, with arrow keys + bindsym Left resize shrink width 10px + bindsym Down resize grow height 10px + bindsym Up resize shrink height 10px + bindsym Right resize grow width 10px + + # return to default mode + bindsym Return mode "default" + bindsym Escape mode "default" +} +bindsym $mod+Shift+r mode "resize" + +# +# Power button +# + +set $mode_system System (l)ock, (e)xit sway, (s)uspend, (h)ibernate, (r)eboot, (S)hutdown +mode "$mode_system" { + bindsym l exec swaylock, mode "default" + bindsym e exec swaymsg exit, mode "default" + bindsym s exec systemctl suspend, mode "default" + bindsym h exec systemctl hibernate, mode "default" + bindsym r exec systemctl reboot, mode "default" + bindsym Shift+s exec systemctl poweroff -i, mode "default" + + # back to normal: Enter, Escape, or q + bindsym Return mode "default" + bindsym Escape mode "default" + bindsym q mode "default" +} +bindsym XF86PowerOff mode "$mode_system" + +# +# Status Bar: +# +# Read `man 5 sway-bar` for more information about this section. +bar { + position bottom + colors { + statusline #ffffff + background #323232 + inactive_workspace #32323200 #32323200 #5c5c5c + } + status_command i3status +} + +# font pango: benis uushi 9 +# font pango: Ubuntu Mono 11 +# font pango: Inconsolata 11 +font pango: DejaVu Sans Mono 9 +# font pango: Liberation Mono 9 + +include /etc/sway/config.d/* +include ~/.config/sway/`hostname` + +#+end_src + +*** langa +:PROPERTIES: +:header-args+: :tangle ~/.config/sway/langa +:END: + +#+begin_src conf +input "2:7:SynPS/2_Synaptics_TouchPad" { + events disabled + dwt enabled + tap enabled + natural_scroll enabled + click_method clickfinger +} + +input "1:1:AT_Translated_Set_2_keyboard" { + repeat_delay 200 + repeat_rate 45 + xkb_layout us_ab,ir + xkb_options ctrl:nocaps,altwin:swap_alt_win,grp:shifts_toggle +} +#+end_src + +*** shemshak +:PROPERTIES: +:header-args+: :tangle ~/.config/sway/shemshak +:END: + +#+begin_src conf +input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" { + dwt enabled + tap enabled + natural_scroll enabled + middle_emulation enabled + click_method clickfinger +} + +input "1:1:AT_Translated_Set_2_keyboard" { + repeat_delay 200 + repeat_rate 45 + xkb_layout us,ir + xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle +} +#+end_src +** swaylock +:PROPERTIES: +:header-args+: :tangle ~/.config/swaylock/config +:END: + +#+begin_src conf +image=/home/amin/usr/pics/wp/wp2445784-blurred-wallpapers.jpg +scaling=fill +#+end_src + +** TLP + +*** langa + +#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "langa")) "/sudo::/etc/default/tlp") +# ------------------------------------------------------------------------------ +# tlp - Parameters for power saving +# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html + +# Hint: some features are disabled by default, remove the leading # to enable +# them. + +# Set to 0 to disable, 1 to enable TLP. +TLP_ENABLE=1 + +# Operation mode when no power supply can be detected: AC, BAT. +# Concerns some desktop and embedded hardware only. +TLP_DEFAULT_MODE=AC + +# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE +# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC. +TLP_PERSISTENT_DEFAULT=0 + +# Seconds laptop mode has to wait after the disk goes idle before doing a sync. +# Non-zero value enables, zero disables laptop mode. +DISK_IDLE_SECS_ON_AC=0 +DISK_IDLE_SECS_ON_BAT=2 + +# Dirty page values (timeouts in secs). +MAX_LOST_WORK_SECS_ON_AC=15 +MAX_LOST_WORK_SECS_ON_BAT=60 + +# Hint: CPU parameters below are disabled by default, remove the leading # +# to enable them, otherwise kernel default values are used. + +# Select a CPU frequency scaling governor. +# Intel Core i processor with intel_pstate driver: +# powersave(*), performance. +# Older hardware with acpi-cpufreq driver: +# ondemand(*), powersave, performance, conservative, schedutil. +# (*) is recommended. +# Hint: use tlp-stat -p to show the active driver and available governors. +# Important: +# powersave for intel_pstate and ondemand for acpi-cpufreq are power +# efficient for *almost all* workloads and therefore kernel and most +# distributions have chosen them as defaults. If you still want to change, +# you should know what you're doing! You *must* disable your distribution's +# governor settings or conflicts will occur. +#CPU_SCALING_GOVERNOR_ON_AC=powersave +#CPU_SCALING_GOVERNOR_ON_BAT=powersave + +# Set the min/max frequency available for the scaling governor. +# Possible values strongly depend on your CPU. For available frequencies see +# the output of tlp-stat -p. +#CPU_SCALING_MIN_FREQ_ON_AC=0 +#CPU_SCALING_MAX_FREQ_ON_AC=0 +#CPU_SCALING_MIN_FREQ_ON_BAT=0 +#CPU_SCALING_MAX_FREQ_ON_BAT=0 + +# Set energy performance hints (HWP) for Intel P-state governor: +# performance, balance_performance, default, balance_power, power +# Values are given in order of increasing power saving. +# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required. +CPU_HWP_ON_AC=balance_performance +CPU_HWP_ON_BAT=balance_power + +# Set Intel P-state performance: 0..100 (%). +# Limit the max/min P-state to control the power dissipation of the CPU. +# Values are stated as a percentage of the available performance. +# Requires an Intel Core i processor with intel_pstate driver. +#CPU_MIN_PERF_ON_AC=0 +#CPU_MAX_PERF_ON_AC=100 +#CPU_MIN_PERF_ON_BAT=0 +#CPU_MAX_PERF_ON_BAT=30 + +# Set the CPU "turbo boost" feature: 0=disable, 1=allow +# Requires an Intel Core i processor. +# Important: +# - This may conflict with your distribution's governor settings +# - A value of 1 does *not* activate boosting, it just allows it +#CPU_BOOST_ON_AC=1 +#CPU_BOOST_ON_BAT=0 + +# Minimize number of used CPU cores/hyper-threads under light load conditions: +# 0=disable, 1=enable. +SCHED_POWERSAVE_ON_AC=0 +SCHED_POWERSAVE_ON_BAT=1 + +# Kernel NMI Watchdog: +# 0=disable (default, saves power), 1=enable (for kernel debugging only). +NMI_WATCHDOG=0 + +# Change CPU voltages aka "undervolting" - Kernel with PHC patch required. +# Frequency voltage pairs are written to: +# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls +# CAUTION: only use this, if you thoroughly understand what you are doing! +#PHC_CONTROLS="F:V F:V F:V F:V" + +# Set CPU performance versus energy savings policy: +# performance, balance-performance, default, balance-power, power. +# Values are given in order of increasing power saving. +# Requires kernel module msr and x86_energy_perf_policy from linux-tools. +ENERGY_PERF_POLICY_ON_AC=performance +ENERGY_PERF_POLICY_ON_BAT=balance-power + +# Disk devices; separate multiple devices with spaces (default: sda). +# Devices can be specified by disk ID also (lookup with: tlp diskid). +DISK_DEVICES="sda sdb" + +# Disk advanced power management level: 1..254, 255 (max saving, min, off). +# Levels 1..127 may spin down the disk; 255 allowable on most drives. +# Separate values for multiple disks with spaces. Use the special value 'keep' +# to keep the hardware default for the particular disk. +DISK_APM_LEVEL_ON_AC="254 254" +DISK_APM_LEVEL_ON_BAT="128 128" + +# Hard disk spin down timeout: +# 0: spin down disabled +# 1..240: timeouts from 5s to 20min (in units of 5s) +# 241..251: timeouts from 30min to 5.5 hours (in units of 30min) +# See 'man hdparm' for details. +# Separate values for multiple disks with spaces. Use the special value 'keep' +# to keep the hardware default for the particular disk. +#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0" +#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0" + +# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq). +# Separate values for multiple disks with spaces. Use the special value 'keep' +# to keep the kernel default scheduler for the particular disk. +#DISK_IOSCHED="cfq cfq" + +# AHCI link power management (ALPM) for disk devices: +# min_power, med_power_with_dipm(*), medium_power, max_performance. +# (*) Kernel >= 4.15 required, then recommended. +# Multiple values separated with spaces are tried sequentially until success. +SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance" +SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power" + +# Exclude host devices from AHCI link power management. +# Separate multiple hosts with spaces. +#SATA_LINKPWR_BLACKLIST="host1" + +# Runtime Power Management for AHCI host and disks devices: +# on=disable, auto=enable. +# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss. +#AHCI_RUNTIME_PM_ON_AC=on +#AHCI_RUNTIME_PM_ON_BAT=on + +# Seconds of inactivity before disk is suspended. +AHCI_RUNTIME_PM_TIMEOUT=15 + +# PCI Express Active State Power Management (PCIe ASPM): +# default, performance, powersave. +PCIE_ASPM_ON_AC=performance +PCIE_ASPM_ON_BAT=powersave + +# Radeon graphics clock speed (profile method): low, mid, high, auto, default; +# auto = mid on BAT, high on AC; default = use hardware defaults. +RADEON_POWER_PROFILE_ON_AC=high +RADEON_POWER_PROFILE_ON_BAT=low + +# Radeon dynamic power management method (DPM): battery, performance. +RADEON_DPM_STATE_ON_AC=performance +RADEON_DPM_STATE_ON_BAT=battery + +# Radeon DPM performance level: auto, low, high; auto is recommended. +RADEON_DPM_PERF_LEVEL_ON_AC=auto +RADEON_DPM_PERF_LEVEL_ON_BAT=auto + +# WiFi power saving mode: on=enable, off=disable; not supported by all adapters. +WIFI_PWR_ON_AC=off +WIFI_PWR_ON_BAT=on + +# Disable wake on LAN: Y/N. +WOL_DISABLE=Y + +# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs). +# A value of 0 disables, >=1 enables power saving (recommended: 1). +SOUND_POWER_SAVE_ON_AC=0 +SOUND_POWER_SAVE_ON_BAT=0 + +# Disable controller too (HDA only): Y/N. +SOUND_POWER_SAVE_CONTROLLER=N + +# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable. +# Drive can be powered on again by releasing (and reinserting) the eject lever +# or by pressing the disc eject button on newer models. +# Note: an UltraBay/MediaBay hard disk is never powered off. +BAY_POWEROFF_ON_AC=0 +BAY_POWEROFF_ON_BAT=0 +# Optical drive device to power off (default sr0). +BAY_DEVICE="sr0" + +# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable. +RUNTIME_PM_ON_AC=on +RUNTIME_PM_ON_BAT=auto + +# Exclude PCI(e) device adresses the following list from Runtime PM +# (separate with spaces). Use lspci to get the adresses (1st column). +#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6" + +# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM. +# Default when unconfigured is "amdgpu nouveau nvidia radeon" which +# prevents accidential power-on of dGPU in hybrid graphics setups. +# Use "" to disable the feature completely. +# Separate multiple drivers with spaces. +#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon" + +# Set to 0 to disable, 1 to enable USB autosuspend feature. +USB_AUTOSUSPEND=1 + +# Exclude listed devices from USB autosuspend (separate with spaces). +# Use lsusb to get the ids. +# Note: input devices (usbhid) are excluded automatically +#USB_BLACKLIST="1111:2222 3333:4444" + +# Bluetooth devices are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude. +USB_BLACKLIST_BTUSB=0 + +# Phone devices are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude (enable charging). +USB_BLACKLIST_PHONE=0 + +# Printers are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude. +USB_BLACKLIST_PRINTER=1 + +# WWAN devices are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude. +USB_BLACKLIST_WWAN=1 + +# Include listed devices into USB autosuspend even if already excluded +# by the blacklists above (separate with spaces). +# Use lsusb to get the ids. +#USB_WHITELIST="1111:2222 3333:4444" + +# Set to 1 to disable autosuspend before shutdown, 0 to do nothing +# (workaround for USB devices that cause shutdown problems). +#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1 + +# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown +# on system startup: 0=disable, 1=enable. +# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below +# are ignored when this is enabled! +#RESTORE_DEVICE_STATE_ON_STARTUP=0 +RESTORE_DEVICE_STATE_ON_STARTUP=0 + +# Radio devices to disable on startup: bluetooth, wifi, wwan. +# Separate multiple devices with spaces. +#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan" +DEVICES_TO_DISABLE_ON_STARTUP="bluetooth" + +# Radio devices to enable on startup: bluetooth, wifi, wwan. +# Separate multiple devices with spaces. +#DEVICES_TO_ENABLE_ON_STARTUP="wifi" + +# Radio devices to disable on shutdown: bluetooth, wifi, wwan. +# (workaround for devices that are blocking shutdown). +#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan" + +# Radio devices to enable on shutdown: bluetooth, wifi, wwan. +# (to prevent other operating systems from missing radios). +#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan" + +# Radio devices to enable on AC: bluetooth, wifi, wwan. +#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan" + +# Radio devices to disable on battery: bluetooth, wifi, wwan. +#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan" + +# Radio devices to disable on battery when not in use (not connected): +# bluetooth, wifi, wwan. +#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan" + +# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module +# required). Charging starts when the remaining capacity falls below the +# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value. +# Main / Internal battery (values in %) +#START_CHARGE_THRESH_BAT0=75 +#STOP_CHARGE_THRESH_BAT0=80 +# Ultrabay / Slice / Replaceable battery (values in %) +#START_CHARGE_THRESH_BAT1=75 +#STOP_CHARGE_THRESH_BAT1=80 + +# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable. +#RESTORE_THRESHOLDS_ON_BAT=1 + +# ------------------------------------------------------------------------------ +# tlp-rdw - Parameters for the radio device wizard +# Possible devices: bluetooth, wifi, wwan. + +# Hints: +# - Parameters are disabled by default, remove the leading # to enable them +# - Separate multiple radio devices with spaces + +# Radio devices to disable on connect. +#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan" +#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan" +#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi" + +# Radio devices to enable on disconnect. +#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan" +#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT="" +#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT="" + +# Radio devices to enable/disable when docked. +#DEVICES_TO_ENABLE_ON_DOCK="" +#DEVICES_TO_DISABLE_ON_DOCK="" + +# Radio devices to enable/disable when undocked. +#DEVICES_TO_ENABLE_ON_UNDOCK="wifi" +#DEVICES_TO_DISABLE_ON_UNDOCK="" +#+end_src + +*** shemshak + +#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "shemshak")) "/sudo::/etc/default/tlp") +# ------------------------------------------------------------------------------ +# tlp - Parameters for power saving +# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html + +# Hint: some features are disabled by default, remove the leading # to enable +# them. + +# Set to 0 to disable, 1 to enable TLP. +TLP_ENABLE=1 + +# Operation mode when no power supply can be detected: AC, BAT. +# Concerns some desktop and embedded hardware only. +TLP_DEFAULT_MODE=AC + +# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE +# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC. +TLP_PERSISTENT_DEFAULT=0 + +# Seconds laptop mode has to wait after the disk goes idle before doing a sync. +# Non-zero value enables, zero disables laptop mode. +DISK_IDLE_SECS_ON_AC=0 +DISK_IDLE_SECS_ON_BAT=2 + +# Dirty page values (timeouts in secs). +MAX_LOST_WORK_SECS_ON_AC=15 +MAX_LOST_WORK_SECS_ON_BAT=60 + +# Hint: CPU parameters below are disabled by default, remove the leading # +# to enable them, otherwise kernel default values are used. + +# Select a CPU frequency scaling governor. +# Intel Core i processor with intel_pstate driver: +# powersave(*), performance. +# Older hardware with acpi-cpufreq driver: +# ondemand(*), powersave, performance, conservative, schedutil. +# (*) is recommended. +# Hint: use tlp-stat -p to show the active driver and available governors. +# Important: +# powersave for intel_pstate and ondemand for acpi-cpufreq are power +# efficient for *almost all* workloads and therefore kernel and most +# distributions have chosen them as defaults. If you still want to change, +# you should know what you're doing! You *must* disable your distribution's +# governor settings or conflicts will occur. +#CPU_SCALING_GOVERNOR_ON_AC=powersave +#CPU_SCALING_GOVERNOR_ON_BAT=powersave + +# Set the min/max frequency available for the scaling governor. +# Possible values strongly depend on your CPU. For available frequencies see +# the output of tlp-stat -p. +#CPU_SCALING_MIN_FREQ_ON_AC=0 +#CPU_SCALING_MAX_FREQ_ON_AC=0 +#CPU_SCALING_MIN_FREQ_ON_BAT=0 +#CPU_SCALING_MAX_FREQ_ON_BAT=0 + +# Set energy performance hints (HWP) for Intel P-state governor: +# performance, balance_performance, default, balance_power, power +# Values are given in order of increasing power saving. +# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required. +CPU_HWP_ON_AC=balance_performance +CPU_HWP_ON_BAT=balance_power + +# Set Intel P-state performance: 0..100 (%). +# Limit the max/min P-state to control the power dissipation of the CPU. +# Values are stated as a percentage of the available performance. +# Requires an Intel Core i processor with intel_pstate driver. +#CPU_MIN_PERF_ON_AC=0 +#CPU_MAX_PERF_ON_AC=100 +#CPU_MIN_PERF_ON_BAT=0 +#CPU_MAX_PERF_ON_BAT=30 + +# Set the CPU "turbo boost" feature: 0=disable, 1=allow +# Requires an Intel Core i processor. +# Important: +# - This may conflict with your distribution's governor settings +# - A value of 1 does *not* activate boosting, it just allows it +#CPU_BOOST_ON_AC=1 +#CPU_BOOST_ON_BAT=0 + +# Minimize number of used CPU cores/hyper-threads under light load conditions: +# 0=disable, 1=enable. +SCHED_POWERSAVE_ON_AC=0 +SCHED_POWERSAVE_ON_BAT=1 + +# Kernel NMI Watchdog: +# 0=disable (default, saves power), 1=enable (for kernel debugging only). +NMI_WATCHDOG=0 + +# Change CPU voltages aka "undervolting" - Kernel with PHC patch required. +# Frequency voltage pairs are written to: +# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls +# CAUTION: only use this, if you thoroughly understand what you are doing! +#PHC_CONTROLS="F:V F:V F:V F:V" + +# Set CPU performance versus energy savings policy: +# performance, balance-performance, default, balance-power, power. +# Values are given in order of increasing power saving. +# Requires kernel module msr and x86_energy_perf_policy from linux-tools. +ENERGY_PERF_POLICY_ON_AC=performance +ENERGY_PERF_POLICY_ON_BAT=balance-power + +# Disk devices; separate multiple devices with spaces (default: sda). +# Devices can be specified by disk ID also (lookup with: tlp diskid). +DISK_DEVICES="sda sdb" + +# Disk advanced power management level: 1..254, 255 (max saving, min, off). +# Levels 1..127 may spin down the disk; 255 allowable on most drives. +# Separate values for multiple disks with spaces. Use the special value 'keep' +# to keep the hardware default for the particular disk. +DISK_APM_LEVEL_ON_AC="254 254" +DISK_APM_LEVEL_ON_BAT="128 128" + +# Hard disk spin down timeout: +# 0: spin down disabled +# 1..240: timeouts from 5s to 20min (in units of 5s) +# 241..251: timeouts from 30min to 5.5 hours (in units of 30min) +# See 'man hdparm' for details. +# Separate values for multiple disks with spaces. Use the special value 'keep' +# to keep the hardware default for the particular disk. +#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0" +#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0" + +# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq). +# Separate values for multiple disks with spaces. Use the special value 'keep' +# to keep the kernel default scheduler for the particular disk. +#DISK_IOSCHED="cfq cfq" + +# AHCI link power management (ALPM) for disk devices: +# min_power, med_power_with_dipm(*), medium_power, max_performance. +# (*) Kernel >= 4.15 required, then recommended. +# Multiple values separated with spaces are tried sequentially until success. +SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance" +SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power" + +# Exclude host devices from AHCI link power management. +# Separate multiple hosts with spaces. +#SATA_LINKPWR_BLACKLIST="host1" + +# Runtime Power Management for AHCI host and disks devices: +# on=disable, auto=enable. +# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss. +#AHCI_RUNTIME_PM_ON_AC=on +#AHCI_RUNTIME_PM_ON_BAT=on + +# Seconds of inactivity before disk is suspended. +AHCI_RUNTIME_PM_TIMEOUT=15 + +# PCI Express Active State Power Management (PCIe ASPM): +# default, performance, powersave. +PCIE_ASPM_ON_AC=performance +PCIE_ASPM_ON_BAT=powersave + +# Radeon graphics clock speed (profile method): low, mid, high, auto, default; +# auto = mid on BAT, high on AC; default = use hardware defaults. +RADEON_POWER_PROFILE_ON_AC=high +RADEON_POWER_PROFILE_ON_BAT=low + +# Radeon dynamic power management method (DPM): battery, performance. +RADEON_DPM_STATE_ON_AC=performance +RADEON_DPM_STATE_ON_BAT=battery + +# Radeon DPM performance level: auto, low, high; auto is recommended. +RADEON_DPM_PERF_LEVEL_ON_AC=auto +RADEON_DPM_PERF_LEVEL_ON_BAT=auto + +# WiFi power saving mode: on=enable, off=disable; not supported by all adapters. +WIFI_PWR_ON_AC=off +WIFI_PWR_ON_BAT=on + +# Disable wake on LAN: Y/N. +WOL_DISABLE=Y + +# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs). +# A value of 0 disables, >=1 enables power saving (recommended: 1). +SOUND_POWER_SAVE_ON_AC=0 +SOUND_POWER_SAVE_ON_BAT=0 + +# Disable controller too (HDA only): Y/N. +SOUND_POWER_SAVE_CONTROLLER=N + +# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable. +# Drive can be powered on again by releasing (and reinserting) the eject lever +# or by pressing the disc eject button on newer models. +# Note: an UltraBay/MediaBay hard disk is never powered off. +BAY_POWEROFF_ON_AC=0 +BAY_POWEROFF_ON_BAT=0 +# Optical drive device to power off (default sr0). +BAY_DEVICE="sr0" + +# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable. +RUNTIME_PM_ON_AC=on +RUNTIME_PM_ON_BAT=auto + +# Exclude PCI(e) device adresses the following list from Runtime PM +# (separate with spaces). Use lspci to get the adresses (1st column). +#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6" +RUNTIME_PM_BLACKLIST="01:00.0" + +# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM. +# Default when unconfigured is "amdgpu nouveau nvidia radeon" which +# prevents accidential power-on of dGPU in hybrid graphics setups. +# Use "" to disable the feature completely. +# Separate multiple drivers with spaces. +#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon" + +# Set to 0 to disable, 1 to enable USB autosuspend feature. +USB_AUTOSUSPEND=1 + +# Exclude listed devices from USB autosuspend (separate with spaces). +# Use lsusb to get the ids. +# Note: input devices (usbhid) are excluded automatically +#USB_BLACKLIST="1111:2222 3333:4444" + +# Bluetooth devices are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude. +USB_BLACKLIST_BTUSB=0 + +# Phone devices are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude (enable charging). +USB_BLACKLIST_PHONE=0 + +# Printers are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude. +USB_BLACKLIST_PRINTER=1 + +# WWAN devices are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude. +USB_BLACKLIST_WWAN=1 + +# Include listed devices into USB autosuspend even if already excluded +# by the blacklists above (separate with spaces). +# Use lsusb to get the ids. +#USB_WHITELIST="1111:2222 3333:4444" + +# Set to 1 to disable autosuspend before shutdown, 0 to do nothing +# (workaround for USB devices that cause shutdown problems). +#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1 + +# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown +# on system startup: 0=disable, 1=enable. +# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below +# are ignored when this is enabled! +#RESTORE_DEVICE_STATE_ON_STARTUP=0 +RESTORE_DEVICE_STATE_ON_STARTUP=1 + +# Radio devices to disable on startup: bluetooth, wifi, wwan. +# Separate multiple devices with spaces. +#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan" + +# Radio devices to enable on startup: bluetooth, wifi, wwan. +# Separate multiple devices with spaces. +#DEVICES_TO_ENABLE_ON_STARTUP="wifi" + +# Radio devices to disable on shutdown: bluetooth, wifi, wwan. +# (workaround for devices that are blocking shutdown). +#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan" + +# Radio devices to enable on shutdown: bluetooth, wifi, wwan. +# (to prevent other operating systems from missing radios). +#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan" + +# Radio devices to enable on AC: bluetooth, wifi, wwan. +#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan" + +# Radio devices to disable on battery: bluetooth, wifi, wwan. +#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan" + +# Radio devices to disable on battery when not in use (not connected): +# bluetooth, wifi, wwan. +#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan" + +# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module +# required). Charging starts when the remaining capacity falls below the +# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value. +# Main / Internal battery (values in %) +#START_CHARGE_THRESH_BAT0=75 +#STOP_CHARGE_THRESH_BAT0=80 +# Ultrabay / Slice / Replaceable battery (values in %) +#START_CHARGE_THRESH_BAT1=75 +#STOP_CHARGE_THRESH_BAT1=80 + +# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable. +#RESTORE_THRESHOLDS_ON_BAT=1 + +# ------------------------------------------------------------------------------ +# tlp-rdw - Parameters for the radio device wizard +# Possible devices: bluetooth, wifi, wwan. + +# Hints: +# - Parameters are disabled by default, remove the leading # to enable them +# - Separate multiple radio devices with spaces + +# Radio devices to disable on connect. +#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan" +#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan" +#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi" + +# Radio devices to enable on disconnect. +#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan" +#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT="" +#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT="" + +# Radio devices to enable/disable when docked. +#DEVICES_TO_ENABLE_ON_DOCK="" +#DEVICES_TO_DISABLE_ON_DOCK="" + +# Radio devices to enable/disable when undocked. +#DEVICES_TO_ENABLE_ON_UNDOCK="wifi" +#DEVICES_TO_DISABLE_ON_UNDOCK="" +#+end_src + +** X + +*** xprofile +:PROPERTIES: +:header-args+: :tangle ~/.xprofile +:END: + +=~/.xprofile= is similar in style to =~/.xinitrc=, but on the +contrary, it's automatically sourced by LightDM, my display manager of +choice. + +#+begin_src sh :tangle no +xset -b # disable bell +xset r rate 200 45 # repeat delay (ms) and rate (repeats/sec) + +# setxkbmap -option compose:ralt + +setxkbmap -option ctrl:nocaps # turn capslock into control +setxkbmap -option altwin:swap_alt_win # swap alt and super + +if [ $(hostname) = "plasma" ] +then + setxkbmap -option ctrl:rctrl_ralt # turn right control into right alt +fi + +if [ $(hostname) = "enigma" ] +then + xmodmap -e "keycode 135 = Alt_R" # remap menu key to alt +fi + +light -Scrs "intel_backlight" 2 + +source $HOME/.zprofile + +export _JAVA_AWT_WM_NONREPARENTING=1 +export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true' + +if [ $(hostname) = "plasma" ] +then + unlock-def-gk.py & +fi + +bspwm & +#+end_src + +*** X resources + +**** Xresources +:PROPERTIES: +:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources") +:END: + +#+begin_src conf-xdefaults +#include ".Xresources.d/fonts" +! #include ".Xresources.d/colors" +#include ".Xresources.d/emacs" +#include ".Xresources.d/rxvt-unicode" +#+end_src + +**** Xresources.d + +***** fonts +:PROPERTIES: +:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts") +:END: + +#+begin_src conf-xdefaults +Xft.lcdfilter: lcddefault +Xft.antialias: true +Xft.autohint: 0 +Xft.hinting: true +Xft.hintstyle: hintslight +! Xft.hintstyle: hintfull +Xft.rgba: rgb +Xft.dpi: 96 +#+end_src + +***** colors +:PROPERTIES: +:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors") +:END: + +#+begin_src conf-xdefaults :tangle no +#include "gruvbox-light.xresources" +! #include "gruvbox-dark.xresources" +#include "gruvbox-urxvt256.xresources" +#+end_src + +#+begin_src conf-xdefaults :tangle no +! ----------------------------------------------------------------------------- +! File: gruvbox-light.xresources +! Description: Retro groove colorscheme generalized +! Author: morhetz +! Source: https://github.com/morhetz/gruvbox-generalized +! Last Modified: 6 Sep 2014 +! ----------------------------------------------------------------------------- + +! hard contrast: *background: #f9f5d7 +*background: #fbf1c7 +! soft contrast: *background: #f2e5bc +*foreground: #3c3836 +! Black + DarkGrey +*color0: #fdf4c1 +*color8: #928374 +! DarkRed + Red +*color1: #cc241d +*color9: #9d0006 +! DarkGreen + Green +*color2: #98971a +*color10: #79740e +! DarkYellow + Yellow +*color3: #d79921 +*color11: #b57614 +! DarkBlue + Blue +*color4: #458588 +*color12: #076678 +! DarkMagenta + Magenta +*color5: #b16286 +*color13: #8f3f71 +! DarkCyan + Cyan +*color6: #689d6a +*color14: #427b58 +! LightGrey + White +*color7: #7c6f64 +*color15: #3c3836 +#+end_src + +#+begin_src conf-xdefaults :tangle no +! ----------------------------------------------------------------------------- +! File: gruvbox-dark.xresources +! Description: Retro groove colorscheme generalized +! Author: morhetz +! Source: https://github.com/morhetz/gruvbox-generalized +! Last Modified: 6 Sep 2014 +! ----------------------------------------------------------------------------- + +! hard contrast: *background: #1d2021 +*background: #282828 +! soft contrast: *background: #32302f +*foreground: #ebdbb2 +! Black + DarkGrey +*color0: #282828 +*color8: #928374 +! DarkRed + Red +*color1: #cc241d +*color9: #fb4934 +! DarkGreen + Green +*color2: #98971a +*color10: #b8bb26 +! DarkYellow + Yellow +*color3: #d79921 +*color11: #fabd2f +! DarkBlue + Blue +*color4: #458588 +*color12: #83a598 +! DarkMagenta + Magenta +*color5: #b16286 +*color13: #d3869b +! DarkCyan + Cyan +*color6: #689d6a +*color14: #8ec07c +! LightGrey + White +*color7: #a89984 +*color15: #ebdbb2 +#+end_src + +#+begin_src conf-xdefaults :tangle no +! ----------------------------------------------------------------------------- +! File: gruvbox-urxvt256.xresources +! Description: Retro groove colorscheme generalized +! Author: morhetz +! Source: https://github.com/morhetz/gruvbox-generalized +! Last Modified: 13 Dec 2013 +! ----------------------------------------------------------------------------- + +URxvt.color24: #076678 +URxvt.color66: #427b58 +URxvt.color88: #9d0006 +URxvt.color96: #8f3f71 +URxvt.color100: #79740e +URxvt.color108: #8ec07c +URxvt.color109: #83a598 +URxvt.color130: #af3a03 +URxvt.color136: #b57614 +URxvt.color142: #b8bb26 +URxvt.color167: #fb4934 +URxvt.color175: #d3869b +URxvt.color208: #fe8019 +URxvt.color214: #fabd2f +URxvt.color223: #ebdbb2 +URxvt.color228: #f2e5bc +URxvt.color229: #fbf1c7 +URxvt.color230: #f9f5d7 +URxvt.color234: #1d2021 +URxvt.color235: #282828 +URxvt.color236: #32302f +URxvt.color237: #3c3836 +URxvt.color239: #504945 +URxvt.color241: #665c54 +URxvt.color243: #7c6f64 +URxvt.color244: #928374 +URxvt.color245: #928374 +URxvt.color246: #a89984 +URxvt.color248: #bdae93 +URxvt.color250: #d5c4a1 +#+end_src + +***** emacs +:PROPERTIES: +:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs") +:END: + +#+begin_src conf-xdefaults +Emacs.menuBar: off +Emacs.toolBar: off +Emacs.verticalScrollBars: off +Emacs.cursorBlink: off +Emacs.FontBackend: xft,x +! Emacs.font: Ubuntu Mono-12 +! Emacs.font: Triplicate T4C-11 +! Emacs.font: Ubuntu Mono-10.5 +! Emacs.font: Ubuntu Mono-12 +! Emacs.font: Iosevka-11 + +! Emacs.font: Fira Mono:size=15 +! Emacs.font: DejaVu Sans Mono:size=15 +! Emacs.font: Inconsolata:size=17 +! Emacs.font: Inconsolata:size=16 +! Emacs.font: Inconsolata LGC:size=14 +! Emacs.font: Source Code Pro Medium-10.5 +Emacs.font: Source Code Pro:size=14 +! Emacs.font: Ubuntu Mono:size=16 +! Emacs.font: Iosevka:size=16 +#+end_src + +***** rxvt-unicode +:PROPERTIES: +:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode") +:END: + +#+begin_src conf-xdefaults +! Font +URxvt.font: xft:source code pro:pixelsize=14:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true +URxvt.boldFont: xft:source code pro semibold:pixelsize=14:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold +URxvt.italicFont: xft:source code pro italic:pixelsize=14:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic +URxvt.bolditalicFont: xft:source code pro semibold italic:pixelsize=14:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic + +URxvt.xftAntialias: true +URxvt.letterSpace: 0 + +URxvt.depth: 0 +URxvt.loginShell: true +URxvt.saveLines: 100000 +URxvt.internalBorder: 3 +URxvt.lineSpace: 0 +URxvt.scrollBar: false +URxvt.scrollStyle: rxvt +URxvt*scrollTtyOutput: false +URxvt*scrollWithBuffer: true +URxvt*scrollTtyKeypress: true +URxvt.keysym.Shift-Up: command:\033]720;1\007 +URxvt.keysym.Shift-Down: command:\033]721;1\007 + +URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select +URxvt.url-select.launcher: firefox +URxvt.url-select.underline: true +URxvt.keysym.M-u: perl:url-select:select_next +URxvt.keysym.M-Escape: perl:keyboard-select:activate +URxvt.keysym.M-s: perl:keyboard-select:search +URxvt.url-launcher: /usr/bin/firefox +URxvt.matcher.button: 1 +URxvt.iso14755: false +URxvt.iso14755_53: false +URxvt.keysym.M-c: perl:clipboard:copy +URxvt.keysym.M-v: perl:clipboard:paste +URxvt.keysym.C-A-V: perl:clipboard:paste_escaped +URxvt.keysym.C-Up: font-size:increase +URxvt.keysym.C-Down: font-size:decrease +URxvt.keysym.C-S-Up: font-size:incglobal +URxvt.keysym.C-S-Down: font-size:decglobal +URxvt.keysym.C-equal: font-size:reset +!URxvt.keysym.C-question: font-size:show + +URxvt.iconFile: /usr/share/icons/Paper/48x48/apps/utilities-terminal.png + +!urxvt*foreground: white +!urxvt*background: black + +!*color0: #2E3436 +!*color1: #a40000 +!*color2: #4E9A06 +!*color3: #C4A000 +!*color4: #3465A4 +!*color5: #75507B +!*color6: #ce5c00 +!*color7: #babdb9 +!*color8: #555753 +!*color9: #EF2929 +!*color10: #8AE234 +!*color11: #FCE94F +!*color12: #729FCF +!*color13: #AD7FA8 +!*color14: #fcaf3e +!*color15: #EEEEEC + +!URxvt.foreground: #C8C8C8 +!URxvt.background: #FFFFFF + +!! black +!*color0: #2E3436 +!*color8: #555753 +!! red +!*color1: #a40000 +!*color9: #EF2929 +!! green +!*color2: #4E9A06 +!*color10: #8AE234 +!! yellow +!*color3: #C4A000 +!*color11: #FCE94F +!! blue +!*color4: #3465A4 +!*color12: #729FCF +!! purple +!*color5: #75507B +!*color13: #AD7FA8 +!! orange (replaces cyan) +!*color6: #ce5c00 +!*color14: #fcaf3e +!! white +!*color7: #babdb9 +!*color15: #EEEEEC + +! Tango colour theme for rxvt-unicode +URxvt.background: #FFFFFF +URxvt.foreground: #000000 + +! Black +URxvt.color0: #2E3436 +URxvt.color8: #757773 + +! Red +URxvt.color1: #CC0000 +URxvt.color9: #EF2929 + +! Green +URxvt.color2: #4E9A06 +URxvt.color10: #8AE234 + +! Yellow +URxvt.color3: #C4A000 +URxvt.color11: #FCE94F + +! Blue +URxvt.color4: #3465A4 +URxvt.color12: #729FCF + +! Magenta +URxvt.color5: #75507B +URxvt.color13: #AD7FA8 + +!! Cyan +!URxvt.color6: #06989A +!URxvt.color14: #34E2E2 +! orange (replaces cyan) +,*color6: #ce5c00 +,*color14: #fcaf3e + +! White +URxvt.color7: #D3D7CF +URxvt.color15: #EEEEEC +#+end_src + +*** xkb us_ab keyboard layout + +#+begin_src conf :tangle "/sudo::/usr/share/X11/xkb/symbols/us_ab" :comments none +default partial alphanumeric_keys +xkb_symbols "us_ab" { + include "us(basic)" + name[Group1]= "English (US)(aminb)"; + + key { [ Alt_R ] }; +}; +#+end_src + +** XDG +:PROPERTIES: +:header-args+: :tangle ~/.config/user-dirs.dirs +:END: + +#+begin_src conf +XDG_DESKTOP_DIR="$HOME/Desktop" +XDG_DOCUMENTS_DIR="$HOME/usr/docs" +XDG_DOWNLOAD_DIR="$HOME/usr/dls" +XDG_MUSIC_DIR="$HOME/usr/music" +XDG_PICTURES_DIR="$HOME/usr/pics" +XDG_PUBLICSHARE_DIR="$HOME/usr/Public" +XDG_TEMPLATES_DIR="$HOME/usr/Templates" +XDG_VIDEOS_DIR="$HOME/usr/vids" +#+end_src + +** Zathura +:PROPERTIES: +:header-args+: :tangle ~/.config/zathura/zathurarc +:END: + +#+begin_src conf +set smooth-scroll true +set selection-clipboard clipboard +set zoom-step 05 +set default-bg "#272727" +set statusbar-bg "#272727" +set inputbar-bg "#373737" +#+end_src + +** Zsh + +My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]], +[[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them +installed. + +*** zimrc +:PROPERTIES: +:header-args+: :tangle ~/.zimrc +:END: + +#+begin_src sh + + +################# +# CORE SETTINGS # +################# + +# +# Zim settings +# + +# Select what modules you would like enabled. +# The second line of modules may depend on options set by modules in the first +# line. These dependencies are noted on the respective module's README.md. +zmodules=(directory environment git git-info history input ssh utility custom \ + syntax-highlighting history-substring-search prompt completion) + + +################### +# MODULE SETTINGS # +################### + +# +# Prompt +# + +# Set your desired prompt here +zprompt_theme='pure' +#PURE_PROMPT_SYMBOL=λ +#PURE_PROMPT_SYMBOL=δ +PURE_PROMPT_SYMBOL=➜ + +# +# Completion +# + +# set an optional host-specific filename for the completion cache file +# if none is provided, the default '.zcompdump' is used. +#zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}" + +# +# Utility +# + +# Uncomment to enable command correction prompts +# See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput +setopt CORRECT + +# +# Environment +# + +# Set the string below to the desired terminal title format string. +# The terminal title is redrawn upon directory change, however, variables like +# ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data: +# http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes +# The example below uses the following format: 'username@host:/current/directory' +ztermtitle='%n@%m:%~' + +# +# Input +# + +# Uncomment to enable double-dot expansion. +# This appends '../' to your input for each '.' you type after an initial '..' +#zdouble_dot_expand='true' + +# +# Syntax-Highlighting +# + +# This determines what highlighters will be used with the syntax-highlighting module. +# Documentation of the highlighters can be found here: +# https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md +# For (u)rxvt, termite and gnome-terminal users, +# removing the 'cursor' highlighter will fix the disappearing cursor problem +#zhighlighters=(main brackets cursor) +zhighlighters=(main brackets pattern) + + +# +# SSH +# + +# Load these ssh identities with the ssh module +zssh_ids=(id_ed25519_bandali) + + +# +# Pacman +# + +# Set (optional) pacman front-end. +zpacman_frontend='yay' + +# Load any helper scripts as defined here +#zpacman_helper=(aur) +#+end_src + +*** zlogin +:PROPERTIES: +:header-args+: :tangle ~/.zlogin +:END: + +#+begin_src sh + + +# +# User configuration sourced by login shells +# + +# Initialize zim +[[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh +#+end_src + +*** zprofile +:PROPERTIES: +:header-args+: :tangle ~/.zprofile +:END: + +#+begin_src sh +#PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH" +#PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH +export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH +export XDG_CONFIG_HOME=$HOME/.config +export XDG_DATA_HOME=$HOME/.local/share +export XDG_DATA_DIRS=/usr/local/share:/usr/share +export MAILDIR="$HOME/mail" +export CVS_RSH=ssh +#export MATHMODELS=$HOME/src/eiffel/mathmodels +#export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src +#export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/ + +# Eiffel2Java stuff +#export JAVA_HOME=/usr/lib/jvm/default +#export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux" +#export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server" +#export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server" + +#export PATH="$HOME/usr/build/pvs:$PATH" +#export SBCLISP_HOME=/usr/share/sbcl-source +#export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib" + +export MOZ_USE_XINPUT2=1 # precise scrolling in firefox + +#export JAVA_HOME=/usr/lib/jvm/java-8-openjdk +#export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G" + +export NIXPKGS=$HOME/src/git/nixpkgs + +if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer +#+end_src + +*** zshenv +:PROPERTIES: +:header-args+: :tangle ~/.zshenv +:END: + +#+begin_src sh +# Ensure that a non-login, non-interactive shell has a defined environment. +if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then + source "${ZDOTDIR:-$HOME}/.zprofile" +fi +#+end_src + +*** zshrc +:PROPERTIES: +:header-args+: :tangle ~/.zshrc +:END: + +#+begin_src sh +# Bash-like navigation +#export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>' +#export WORDCHARS='*?-[]~=&;!#$%^(){}<>' +export WORDCHARS='*?[]~=&;!#$%^(){}<>' +#ZLE_SPACE_SUFFIX_CHARS=$'|&' + +#disable -r time # disable shell reserved word +#alias time='time -p' # -p for POSIX output + +# rehash if last command was pacaur or pacman +# (so that zsh picks up changes in $PATH immediately) +TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh } + +# +# User configuration sourced by interactive shells +# + +# Change default zim location +export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim + +# Start zim +[[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh + +ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red') +#ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold' + +setopt globdots + +source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh +# source ~/.zsh/zsh-autopair/autopair.zsh + + +### fzf ### + +source /usr/share/fzf/key-bindings.zsh +source /usr/share/fzf/completion.zsh + +# Accept history selection instead of putting it on +# the command line +fzf-history-widget-accept() { + fzf-history-widget + zle accept-line +} +#zle -N fzf-history-widget-accept +#bindkey '^R' fzf-history-widget-accept + +# alt+c preview +export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'" + +### fzf ### + + +# aliases +alias mpv="mpv --ytdl-format mp4" +alias mv="mv -iv" +alias cp="cp -iv" +alias scl=systemctl +alias jcl=journalctl +alias m="mbsync -Va; getmail; notmuch new" +alias best="youtube-dl -f best" +alias nixx="ssh amin@nix.aminb.org" +alias fence="ssh aminb@fencepost.gnu.org" + +aur() { + cd ~/usr/build + git clone https://aur.archlinux.org/${1}.git + cd ${1} +} + +# i-beam cursor +echo -e "\033[5 q" +#echo -e "\033[6 q" +#+end_src + +* Scripts + +This section contains various useful scripts and the ones used by the +programs above. For instance, =toggle-tablet= for switching to and +from tablet mode on my X220T, =toggle-presentation-mode= for toggling +Xfce's presentation mode which keeps the screen awake, and +=rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an exact brightness value. +** battery-percentage-time +:PROPERTIES: +:header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/sh" +:END: + +#+begin_src sh :tangle no +dbus_send() { + label=$1 + dbus-send --print-reply=literal --system \ + --dest=org.freedesktop.UPower \ + /org/freedesktop/UPower/devices/battery_BAT0 \ + org.freedesktop.DBus.Properties.Get \ + string:org.freedesktop.UPower.Device \ + string:"${label}" | awk '{print $3}' +} + +perc=$(dbus_send 'Percentage') +state=$(dbus_send 'State') + +if [ "$state" -eq 2 ]; then # Discharging + secs=$(dbus_send 'TimeToEmpty') +elif [ "$state" -eq 1 ]; then # Charging + secs=$(dbus_send 'TimeToFull') +fi + +printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60)) +#+end_src + ** rofi-light :PROPERTIES: :header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash" @@ -3332,16 +5408,66 @@ exact brightness value. #+begin_src bash cur=$(light -G) -val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 8) +val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 12) light -S $val #+end_src +** s (run sway) +:PROPERTIES: +:header-args+: :tangle ~/.local/bin/s :shebang "#!/bin/bash" +:END: + +#+begin_src bash +export _JAVA_AWT_WM_NONREPARENTING=1 +export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true' +light -Scrs "intel_backlight" 2 +source $HOME/.zprofile +sway +#+end_src + +** sway-ws-util +:PROPERTIES: +:header-args+: :tangle ~/.local/bin/sway-ws-util :shebang "#!/bin/bash" +:END: + +#+begin_src bash +curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name') +[[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1)) +[[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1)) +dest_ws=-1 +op=-1 + +if [ "$1" = "switch" ] || [ "$1" = "move" ]; then + op="$1" + if [ "$2" = "prev" ]; then + dest_ws="$prev_ws" + elif [ "$2" = "next" ]; then + dest_ws="$next_ws" + else + echo "Usage: $0 $1 {prev|next} [follow]" + exit 1 + fi +else + echo "Usage: $0 {switch|move} {prev|next} [follow]" + exit 1 +fi + +if [ "$op" = "switch" ]; then + sway workspace "$dest_ws" +elif [ "$op" = "move" ]; then + sway move container to workspace "$dest_ws" + if [ "$3" = "follow" ]; then + sway workspace "$dest_ws" + fi +fi +#+end_src + ** toggle-layout :PROPERTIES: :header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash" :END: -#+begin_src bash +#+begin_src bash :tangle no lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)" if [ "$lang" = "us" ]; then @@ -3357,10 +5483,199 @@ fi :header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash" :END: -#+begin_src bash +#+begin_src bash :tangle no xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T #+end_src +** toggle-tablet +:PROPERTIES: +:header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash" +:END: + +This script toggles between a 'normal' mode and a 'tablet' mode, doing +a few things: + +- rotates the screen using =xrandr=, so that rotating the physical + display of my X220t would have the laptop's battery on the right + hand side, +- enables touch screen, +- properly rotates the stylus pen and touch screen pointers, and +- toggles between RGB and Vertical BGR sub-pixel order. + +#+begin_src bash :tangle no +case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in + 0) # Screen is not rotated, we should rotate it right (90°) + xrandr -o 3 + xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1 + xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1 + xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1 + xfconf-query -c xsettings -p /Xft/RGBA -s vbgr + ;; + 1) # Currently top is rotated right, we should set it normal (0°) + xrandr -o 0 + xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0 + xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0 + xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0 + xfconf-query -c xsettings -p /Xft/RGBA -s rgb + ;; + *) + echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2 + exit 1 + ;; +esac +#+end_src + +** unlock-def-gk.py +:PROPERTIES: +:header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2" +:END: + +#+begin_src python :tangle no +import gnomekeyring as gk +# list_item_ids_sync('login')[0] == 1L +gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret()) +#+end_src + +** volume-info +:PROPERTIES: +:header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh" +:END: + +#+begin_src sh :tangle no +cur_vol=$(pamixer --get-volume) + +if [ $(pamixer --get-mute) = true ]; then + printf 'mt \n' "$cur_vol" +else + printf '%02d \n' "$cur_vol" +fi +#+end_src + +** wp + +My little wallpaper changer script. + +*** wp +:PROPERTIES: +:header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash" +:END: + +#+begin_src bash :tangle no +export DISPLAY=:0 + +case "$1" in + "day") + feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg + ;; + "night") + feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg + ;; + *) + echo $"Usage: $0 {day|night}" + exit 1 +esac +#+end_src + +*** wp-auto +:PROPERTIES: +:header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash" +:END: + +#+begin_src bash :tangle no +SED=$(which sed) +ROFI=$(which rofi) + +export DISPLAY=:0 +HOUR=$(date +%H) + +if [ -z "${SED}" ] +then + echo "Did not find 'sed', script cannot continue." + exit 1 +fi +if [ -z "${ROFI}" ] +then + echo "Did not find rofi, there is no point to continue." + exit 1 +fi + +### +# Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end. +# Repeated calls should leave the config clean-ish +### +function set_theme() +{ + CDIR="${HOME}/.config/rofi/" + if [ ! -d "${CDIR}" ] + then + mkdir -p ${CDIR} + fi + if [ -f "${CDIR}/config" ] + then + ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config" + fi + echo "rofi.theme: ${1}" >> "${CDIR}/config" + +} + +if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ] + then + feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg + xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources + set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi" + else + feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg + xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources + set_theme "/usr/share/rofi/themes//gruvbox-light.rasi" +fi +#+end_src + +*** wp.service +:PROPERTIES: +:header-args+: :tangle ~/.config/systemd/user/wp.service +:END: + +#+begin_src conf :tangle no +[Unit] +Description=wallpaper service + +[Service] +Type=oneshot +ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto +#+end_src + +*** wp.timer +:PROPERTIES: +:header-args+: :tangle ~/.config/systemd/user/wp.timer +:END: + +#+begin_src conf :tangle no +[Unit] +[Unit] +Description=wallpaper timer + +[Timer] +OnCalendar=07,21:00 +Unit=wp.service +Persistent=true + +[Install] +WantedBy=timers.target +#+end_src + +** zathura-sync.sh +:PROPERTIES: +:header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh" +:END: + +#+begin_src sh +pos="$1" +pdffile="$2" +zathura --synctex-forward "$pos" "$pdffile" || \ + ( + zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" & + sleep 1; zathura --synctex-forward "$pos" "$pdffile" ) +#+end_src ** Fun :) *** eat-em