X-Git-Url: https://git.shemshak.org/gitweb.cgi/~bandali/configs/blobdiff_plain/40085087bfc85bf447146336efe4e4b8de44b572..a4aa1167bdf5b1fe79be5c6e6bce5d2b3be8c708:/rc.org?ds=inline diff --git a/rc.org b/rc.org index 8bf9622..e648215 100644 --- a/rc.org +++ b/rc.org @@ -625,9 +625,9 @@ timeout = 0 Helvetica - + Liberation Sans - + #+end_src @@ -643,7 +643,7 @@ timeout = 0 [retriever] type = SimplePOP3SSLRetriever server = fencepost.gnu.org -username = aminb +username = bandali password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg") port = 995 use_apop = True @@ -701,8 +701,8 @@ WantedBy=timers.target #+begin_src conf [user] name = Amin Bandali - email = amin@gnu.org - signingkey = CDDE75F903538E71813CDA27D1FBA36627D65876 + email = bandali@gnu.org + signingkey = BE6273738E616D6D1B3A08E8A21A020248816103 #+end_src **** signing @@ -781,7 +781,7 @@ WantedBy=timers.target **** send-email #+begin_src conf [sendemail] - smtpuser = aminb + smtpuser = bandali smtpserver = fencepost.gnu.org smtpserverport = 587 smtpencryption = tls @@ -921,18 +921,21 @@ separator_width=0 general { colors = true interval = 5 + output_format = "i3bar" } -order += "ipv6" +# order += "ipv6" order += "disk /" +order += "disk /data" order += "wireless _first_" order += "ethernet _first_" -order += "battery all" +order += "battery 0" +order += "volume master" order += "load" order += "tztime local" wireless _first_ { - format_up = "W: (%quality at %essid) %ip" + format_up = "W:%quality %essid %ip" format_down = "W: down" } @@ -942,12 +945,24 @@ ethernet _first_ { format_down = "E: down" } -battery all { - format = "%status %percentage %remaining" +battery 0 { + format = "%status %percentage %remaining (%consumption)" + path = "/sys/class/power_supply/BAT%d/uevent" + low_threshold = "10" + threshold_type = "percentage" + last_full_capacity = true + integer_battery_capacity = true + hide_seconds = true } tztime local { - format = "%Y-%m-%d %H:%M:%S" + format = "%-I:%M%P %a %b %d" +} + +volume master { + format = "♪ %volume" + format_muted = "🔇 %volume" + device = "pulse" } load { @@ -955,7 +970,11 @@ load { } disk "/" { - format = "%avail" + format = "/ %avail" +} + +disk "/data" { + format = "/data %avail" } #+end_src @@ -1528,17 +1547,17 @@ passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg account gnu host fencepost.gnu.org # use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint -tls_fingerprint 28:70:42:76:1C:EC:91:5F:D1:B3:27:A1:CD:3B:32:A4:8B:0B:DC:3A:CD:CA:F6:6F:E4:61:BA:69:D7:4D:0D:0B +tls_fingerprint 34:60:91:B5:71:5B:76:87:50:F3:83:13:26:0F:EE:75:42:83:93:9A:E2:AF:1E:87:72:02:C9:61:CE:28:1B:8E tls_starttls on -from aminb@gnu.org -user aminb +from bandali@gnu.org +user bandali passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg -# gnu (amin) +# gnu (old) +account gnu-aminb : gnu +from aminb@gnu.org account gnu-amin : gnu from amin@gnu.org - -# gnu (mab) account gnu-mab : gnu from mab@gnu.org @@ -2173,7 +2192,7 @@ path=/home/amin/mail [user] name=Amin Bandali primary_email=amin@aminb.org -other_email=amin@gnu.org;abandali@uwaterloo.ca;mab@gnu.org;aminb@gnu.org; +other_email=bandali@gnu.org;abandali@uwaterloo.ca; # Configuration for "notmuch new" # @@ -2259,7 +2278,7 @@ sieve-filter -eW -o postmaster_address=postmaster@aminb.org \ #+begin_src sh # apply sent tag to messages sent by me -notmuch tag -new +sent -- from:amin@aminb.org or from:amin@gnu.org or from:mab@gnu.org or from:aminb@gnu.org or from:abandali@uwaterloo.ca +notmuch tag -new +sent -- from:amin@aminb.org or from:bandali@gnu.org or from:aminb@gnu.org or from:amin@gnu.org or from:mab@gnu.org or from:abandali@uwaterloo.ca # initial tagging notmuch tag -latest -- tag:latest @@ -2272,14 +2291,19 @@ notmuch tag +inbox +unread +latest -new -- tag:new notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter notmuch tag -inbox +lists/haskell-weekly -- folder:amin/lists/haskell-weekly -notmuch tag -inbox +pay -- folder:amin/pay +notmuch tag -inbox +pay -- folder:amin/pay notmuch tag -inbox +banking -- folder:amin/banking +notmuch tag -inbox +work -- folder:amin/work # # -notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136 -notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463 +notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136 +notmuch tag -inbox +uw/cs846 -- folder:uwaterloo/lists/cs846 +notmuch tag -inbox +uw/ece750 -- folder:uwaterloo/lists/ece750 +notmuch tag -inbox +uw/se212 -- folder:uwaterloo/lists/se212 +notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463 +notmuch tag -inbox +lists/alloytools -- folder:uwaterloo/lists/alloytools notmuch tag -inbox +lists/clvsingle -- folder:uwaterloo/lists/Clvsingle notmuch tag -inbox +lists/gsa -- folder:uwaterloo/lists/GSA notmuch tag -inbox +lists/math-grad -- folder:uwaterloo/lists/Math-grad @@ -3639,10 +3663,11 @@ adjustment-method=randr :END: #+begin_src conf -rofi.font: Ubuntu Mono 13 +! rofi.font: Ubuntu Mono 13 ! rofi.font: Inconsolata 16 ! rofi.font: Iosevka 13 ! rofi.font: Source Code Pro 11 +rofi.font: Source Code Pro 10.5 rofi.modi: run,window ! rofi.width: 640 rofi.width: 600 @@ -3741,13 +3766,13 @@ insert_pass="Alt+n" #+end_src ** sway + +*** main :PROPERTIES: :header-args+: :tangle ~/.config/sway/config :END: #+begin_src conf -exec xrdb .Xresources -exec dunst ### Variables # super set $mod Mod4 @@ -3772,35 +3797,11 @@ output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill # You can get the names of your outputs by running: swaymsg -t get_outputs ### Idle configuration -# -# Example configuration: -# -#exec swayidle \ -# timeout 300 'swaylock -c 000000' \ -# timeout 600 'swaymsg "output * dpms off"' \ -# resume 'swaymsg "output * dpms on"' \ -# before-sleep 'swaylock -c 000000' -# -# This will lock your screen after 300 seconds of inactivity, then turn off -# your displays after another 600 seconds, and turn your screens back on when -# resumed. It will also lock your screen before your computer goes to sleep. - -### Input configuration -input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" { - dwt enabled - tap enabled - natural_scroll enabled - middle_emulation enabled - click_method clickfinger -} - -input "1:1:AT_Translated_Set_2_keyboard" { - repeat_delay 200 - repeat_rate 45 - xkb_layout us,ir - xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle -} +exec swayidle \ + timeout 120 '[ -f ~/.nosleep ] || swaymsg "output * dpms off"' \ + resume '[ -f ~/.nosleep ] || swaymsg "output * dpms on"' \ + before-sleep swaylock ### Key bindings @@ -3817,7 +3818,7 @@ input "1:1:AT_Translated_Set_2_keyboard" { bindsym $mod+d exec $menu # password manager - bindsym $mod+$mod2+space exec rofi-pass + bindsym $mod2+space exec rofi-pass # Drag floating windows by holding down $mod and left mouse button. # Resize them with right mouse button + $mod. @@ -3965,6 +3966,59 @@ mode "resize" { } bindsym $mod+Shift+r mode "resize" +# +# Power button +# + +set $mode_system System (l)ock, (e)xit sway, (s)uspend, (h)ibernate, (r)eboot, (S)hutdown +mode "$mode_system" { + bindsym l exec swaylock, mode "default" + bindsym e exec swaymsg exit, mode "default" + bindsym s exec systemctl suspend, mode "default" + bindsym h exec systemctl hibernate, mode "default" + bindsym r exec systemctl reboot, mode "default" + bindsym Shift+s exec systemctl poweroff -i, mode "default" + + # back to normal: Enter, Escape, or q + bindsym Return mode "default" + bindsym Escape mode "default" + bindsym q mode "default" +} +bindsym XF86PowerOff mode "$mode_system" + +# +# Presentation mode +# + +bindsym $mod+$mod2+p exec ([ ! -e ~/.nosleep ] && touch ~/.nosleep || rm ~/.nosleep) && killall -USR1 i3status + +# +# Notifications +# + +bindsym $mod+Shift+n mode notifications +mode notifications { + bindsym Return exec makoctl invoke; exec makoctl dismiss; mode default + bindsym d exec makoctl dismiss; mode default + bindsym Shift+d exec makoctl dismiss -a; mode default + + bindsym Escape mode default + bindsym q mode default +} + +# +# Screenshotting +# + +bindsym $mod+Shift+s mode screenshot +mode screenshot { + bindsym a exec grim $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default + bindsym r exec slurp | grim -g - $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default + + bindsym Escape mode default + bindsym q mode default +} + # # Status Bar: # @@ -3976,18 +4030,400 @@ bar { background #323232 inactive_workspace #32323200 #32323200 #5c5c5c } - status_command i3status + status_command i3status | my-i3status.py } +# font pango: benis uushi 9 +# font pango: Ubuntu Mono 11 +# font pango: Inconsolata 11 +font pango: DejaVu Sans Mono 9 +# font pango: Liberation Mono 9 + +exec xrdb .Xresources +exec pgrep -x "systemd-inhibit" || \ + systemd-inhibit --what=handle-power-key --who=aminb \ + --why="Handle power button in sway" sleep infinity +exec mako 2>&1 >/tmp/mako.log +exec /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1 + include /etc/sway/config.d/* +include ~/.config/sway/`hostname` + +exec systemd-notify --ready || true + +#+end_src + +*** langa +:PROPERTIES: +:header-args+: :tangle ~/.config/sway/langa +:END: + +#+begin_src conf +input "2:7:SynPS/2_Synaptics_TouchPad" { + events disabled + dwt enabled + tap enabled + natural_scroll enabled + click_method clickfinger +} + +input "1:1:AT_Translated_Set_2_keyboard" { + repeat_delay 200 + repeat_rate 45 + xkb_layout us_ab,ir + xkb_options ctrl:nocaps,altwin:swap_alt_win,grp:shifts_toggle +} +#+end_src + +*** shemshak +:PROPERTIES: +:header-args+: :tangle ~/.config/sway/shemshak +:END: + +#+begin_src conf +input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" { + dwt enabled + tap enabled + natural_scroll enabled + middle_emulation enabled + click_method clickfinger +} + +input "1:1:AT_Translated_Set_2_keyboard" { + repeat_delay 200 + repeat_rate 45 + xkb_layout us,ir + xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle +} +#+end_src +** swaylock +:PROPERTIES: +:header-args+: :tangle ~/.config/swaylock/config +:END: + +#+begin_src conf +image=/home/amin/usr/pics/wp/wp2445784-blurred-wallpapers.jpg +scaling=fill #+end_src ** TLP -*** TODO enigma -*** archy +*** langa -#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "archy")) "/sudo::/etc/default/tlp") +#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "langa")) "/sudo::/etc/default/tlp") +# ------------------------------------------------------------------------------ +# tlp - Parameters for power saving +# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html + +# Hint: some features are disabled by default, remove the leading # to enable +# them. + +# Set to 0 to disable, 1 to enable TLP. +TLP_ENABLE=1 + +# Operation mode when no power supply can be detected: AC, BAT. +# Concerns some desktop and embedded hardware only. +TLP_DEFAULT_MODE=AC + +# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE +# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC. +TLP_PERSISTENT_DEFAULT=0 + +# Seconds laptop mode has to wait after the disk goes idle before doing a sync. +# Non-zero value enables, zero disables laptop mode. +DISK_IDLE_SECS_ON_AC=0 +DISK_IDLE_SECS_ON_BAT=2 + +# Dirty page values (timeouts in secs). +MAX_LOST_WORK_SECS_ON_AC=15 +MAX_LOST_WORK_SECS_ON_BAT=60 + +# Hint: CPU parameters below are disabled by default, remove the leading # +# to enable them, otherwise kernel default values are used. + +# Select a CPU frequency scaling governor. +# Intel Core i processor with intel_pstate driver: +# powersave(*), performance. +# Older hardware with acpi-cpufreq driver: +# ondemand(*), powersave, performance, conservative, schedutil. +# (*) is recommended. +# Hint: use tlp-stat -p to show the active driver and available governors. +# Important: +# powersave for intel_pstate and ondemand for acpi-cpufreq are power +# efficient for *almost all* workloads and therefore kernel and most +# distributions have chosen them as defaults. If you still want to change, +# you should know what you're doing! You *must* disable your distribution's +# governor settings or conflicts will occur. +#CPU_SCALING_GOVERNOR_ON_AC=powersave +#CPU_SCALING_GOVERNOR_ON_BAT=powersave + +# Set the min/max frequency available for the scaling governor. +# Possible values strongly depend on your CPU. For available frequencies see +# the output of tlp-stat -p. +#CPU_SCALING_MIN_FREQ_ON_AC=0 +#CPU_SCALING_MAX_FREQ_ON_AC=0 +#CPU_SCALING_MIN_FREQ_ON_BAT=0 +#CPU_SCALING_MAX_FREQ_ON_BAT=0 + +# Set energy performance hints (HWP) for Intel P-state governor: +# performance, balance_performance, default, balance_power, power +# Values are given in order of increasing power saving. +# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required. +CPU_HWP_ON_AC=balance_performance +CPU_HWP_ON_BAT=balance_power + +# Set Intel P-state performance: 0..100 (%). +# Limit the max/min P-state to control the power dissipation of the CPU. +# Values are stated as a percentage of the available performance. +# Requires an Intel Core i processor with intel_pstate driver. +#CPU_MIN_PERF_ON_AC=0 +#CPU_MAX_PERF_ON_AC=100 +#CPU_MIN_PERF_ON_BAT=0 +#CPU_MAX_PERF_ON_BAT=30 + +# Set the CPU "turbo boost" feature: 0=disable, 1=allow +# Requires an Intel Core i processor. +# Important: +# - This may conflict with your distribution's governor settings +# - A value of 1 does *not* activate boosting, it just allows it +#CPU_BOOST_ON_AC=1 +#CPU_BOOST_ON_BAT=0 + +# Minimize number of used CPU cores/hyper-threads under light load conditions: +# 0=disable, 1=enable. +SCHED_POWERSAVE_ON_AC=0 +SCHED_POWERSAVE_ON_BAT=1 + +# Kernel NMI Watchdog: +# 0=disable (default, saves power), 1=enable (for kernel debugging only). +NMI_WATCHDOG=0 + +# Change CPU voltages aka "undervolting" - Kernel with PHC patch required. +# Frequency voltage pairs are written to: +# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls +# CAUTION: only use this, if you thoroughly understand what you are doing! +#PHC_CONTROLS="F:V F:V F:V F:V" + +# Set CPU performance versus energy savings policy: +# performance, balance-performance, default, balance-power, power. +# Values are given in order of increasing power saving. +# Requires kernel module msr and x86_energy_perf_policy from linux-tools. +ENERGY_PERF_POLICY_ON_AC=performance +ENERGY_PERF_POLICY_ON_BAT=balance-power + +# Disk devices; separate multiple devices with spaces (default: sda). +# Devices can be specified by disk ID also (lookup with: tlp diskid). +DISK_DEVICES="sda sdb" + +# Disk advanced power management level: 1..254, 255 (max saving, min, off). +# Levels 1..127 may spin down the disk; 255 allowable on most drives. +# Separate values for multiple disks with spaces. Use the special value 'keep' +# to keep the hardware default for the particular disk. +DISK_APM_LEVEL_ON_AC="254 254" +DISK_APM_LEVEL_ON_BAT="128 128" + +# Hard disk spin down timeout: +# 0: spin down disabled +# 1..240: timeouts from 5s to 20min (in units of 5s) +# 241..251: timeouts from 30min to 5.5 hours (in units of 30min) +# See 'man hdparm' for details. +# Separate values for multiple disks with spaces. Use the special value 'keep' +# to keep the hardware default for the particular disk. +#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0" +#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0" + +# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq). +# Separate values for multiple disks with spaces. Use the special value 'keep' +# to keep the kernel default scheduler for the particular disk. +#DISK_IOSCHED="cfq cfq" + +# AHCI link power management (ALPM) for disk devices: +# min_power, med_power_with_dipm(*), medium_power, max_performance. +# (*) Kernel >= 4.15 required, then recommended. +# Multiple values separated with spaces are tried sequentially until success. +SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance" +SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power" + +# Exclude host devices from AHCI link power management. +# Separate multiple hosts with spaces. +#SATA_LINKPWR_BLACKLIST="host1" + +# Runtime Power Management for AHCI host and disks devices: +# on=disable, auto=enable. +# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss. +#AHCI_RUNTIME_PM_ON_AC=on +#AHCI_RUNTIME_PM_ON_BAT=on + +# Seconds of inactivity before disk is suspended. +AHCI_RUNTIME_PM_TIMEOUT=15 + +# PCI Express Active State Power Management (PCIe ASPM): +# default, performance, powersave. +PCIE_ASPM_ON_AC=performance +PCIE_ASPM_ON_BAT=powersave + +# Radeon graphics clock speed (profile method): low, mid, high, auto, default; +# auto = mid on BAT, high on AC; default = use hardware defaults. +RADEON_POWER_PROFILE_ON_AC=high +RADEON_POWER_PROFILE_ON_BAT=low + +# Radeon dynamic power management method (DPM): battery, performance. +RADEON_DPM_STATE_ON_AC=performance +RADEON_DPM_STATE_ON_BAT=battery + +# Radeon DPM performance level: auto, low, high; auto is recommended. +RADEON_DPM_PERF_LEVEL_ON_AC=auto +RADEON_DPM_PERF_LEVEL_ON_BAT=auto + +# WiFi power saving mode: on=enable, off=disable; not supported by all adapters. +WIFI_PWR_ON_AC=off +WIFI_PWR_ON_BAT=on + +# Disable wake on LAN: Y/N. +WOL_DISABLE=Y + +# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs). +# A value of 0 disables, >=1 enables power saving (recommended: 1). +SOUND_POWER_SAVE_ON_AC=0 +SOUND_POWER_SAVE_ON_BAT=0 + +# Disable controller too (HDA only): Y/N. +SOUND_POWER_SAVE_CONTROLLER=N + +# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable. +# Drive can be powered on again by releasing (and reinserting) the eject lever +# or by pressing the disc eject button on newer models. +# Note: an UltraBay/MediaBay hard disk is never powered off. +BAY_POWEROFF_ON_AC=0 +BAY_POWEROFF_ON_BAT=0 +# Optical drive device to power off (default sr0). +BAY_DEVICE="sr0" + +# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable. +RUNTIME_PM_ON_AC=on +RUNTIME_PM_ON_BAT=auto + +# Exclude PCI(e) device adresses the following list from Runtime PM +# (separate with spaces). Use lspci to get the adresses (1st column). +#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6" + +# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM. +# Default when unconfigured is "amdgpu nouveau nvidia radeon" which +# prevents accidential power-on of dGPU in hybrid graphics setups. +# Use "" to disable the feature completely. +# Separate multiple drivers with spaces. +#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon" + +# Set to 0 to disable, 1 to enable USB autosuspend feature. +USB_AUTOSUSPEND=1 + +# Exclude listed devices from USB autosuspend (separate with spaces). +# Use lsusb to get the ids. +# Note: input devices (usbhid) are excluded automatically +#USB_BLACKLIST="1111:2222 3333:4444" + +# Bluetooth devices are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude. +USB_BLACKLIST_BTUSB=0 + +# Phone devices are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude (enable charging). +USB_BLACKLIST_PHONE=0 + +# Printers are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude. +USB_BLACKLIST_PRINTER=1 + +# WWAN devices are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude. +USB_BLACKLIST_WWAN=1 + +# Include listed devices into USB autosuspend even if already excluded +# by the blacklists above (separate with spaces). +# Use lsusb to get the ids. +#USB_WHITELIST="1111:2222 3333:4444" + +# Set to 1 to disable autosuspend before shutdown, 0 to do nothing +# (workaround for USB devices that cause shutdown problems). +#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1 + +# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown +# on system startup: 0=disable, 1=enable. +# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below +# are ignored when this is enabled! +#RESTORE_DEVICE_STATE_ON_STARTUP=0 +RESTORE_DEVICE_STATE_ON_STARTUP=0 + +# Radio devices to disable on startup: bluetooth, wifi, wwan. +# Separate multiple devices with spaces. +#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan" +DEVICES_TO_DISABLE_ON_STARTUP="bluetooth" + +# Radio devices to enable on startup: bluetooth, wifi, wwan. +# Separate multiple devices with spaces. +#DEVICES_TO_ENABLE_ON_STARTUP="wifi" + +# Radio devices to disable on shutdown: bluetooth, wifi, wwan. +# (workaround for devices that are blocking shutdown). +#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan" + +# Radio devices to enable on shutdown: bluetooth, wifi, wwan. +# (to prevent other operating systems from missing radios). +#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan" + +# Radio devices to enable on AC: bluetooth, wifi, wwan. +#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan" + +# Radio devices to disable on battery: bluetooth, wifi, wwan. +#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan" + +# Radio devices to disable on battery when not in use (not connected): +# bluetooth, wifi, wwan. +#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan" + +# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module +# required). Charging starts when the remaining capacity falls below the +# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value. +# Main / Internal battery (values in %) +#START_CHARGE_THRESH_BAT0=75 +#STOP_CHARGE_THRESH_BAT0=80 +# Ultrabay / Slice / Replaceable battery (values in %) +#START_CHARGE_THRESH_BAT1=75 +#STOP_CHARGE_THRESH_BAT1=80 + +# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable. +#RESTORE_THRESHOLDS_ON_BAT=1 + +# ------------------------------------------------------------------------------ +# tlp-rdw - Parameters for the radio device wizard +# Possible devices: bluetooth, wifi, wwan. + +# Hints: +# - Parameters are disabled by default, remove the leading # to enable them +# - Separate multiple radio devices with spaces + +# Radio devices to disable on connect. +#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan" +#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan" +#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi" + +# Radio devices to enable on disconnect. +#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan" +#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT="" +#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT="" + +# Radio devices to enable/disable when docked. +#DEVICES_TO_ENABLE_ON_DOCK="" +#DEVICES_TO_DISABLE_ON_DOCK="" + +# Radio devices to enable/disable when undocked. +#DEVICES_TO_ENABLE_ON_UNDOCK="wifi" +#DEVICES_TO_DISABLE_ON_UNDOCK="" +#+end_src + +*** shemshak + +#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "shemshak")) "/sudo::/etc/default/tlp") # ------------------------------------------------------------------------------ # tlp - Parameters for power saving # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html @@ -4528,7 +4964,8 @@ Emacs.FontBackend: xft,x ! Emacs.font: Inconsolata:size=16 ! Emacs.font: Inconsolata LGC:size=14 ! Emacs.font: Source Code Pro Medium-10.5 -Emacs.font: Ubuntu Mono:size=16 +Emacs.font: Source Code Pro:size=14 +! Emacs.font: Ubuntu Mono:size=16 ! Emacs.font: Iosevka:size=16 #+end_src @@ -4539,10 +4976,10 @@ Emacs.font: Ubuntu Mono:size=16 #+begin_src conf-xdefaults ! Font -URxvt.font: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true -URxvt.boldFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold -URxvt.italicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic -URxvt.bolditalicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic +URxvt.font: xft:source code pro:pixelsize=14:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true +URxvt.boldFont: xft:source code pro semibold:pixelsize=14:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold +URxvt.italicFont: xft:source code pro italic:pixelsize=14:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic +URxvt.bolditalicFont: xft:source code pro semibold italic:pixelsize=14:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic URxvt.xftAntialias: true URxvt.letterSpace: 0 @@ -4561,8 +4998,6 @@ URxvt.keysym.Shift-Up: command:\033]720;1\007 URxvt.keysym.Shift-Down: command:\033]721;1\007 URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select -URxvt.perl-ext: bidi -URxvt.bidi.enabled: 1 URxvt.url-select.launcher: firefox URxvt.url-select.underline: true URxvt.keysym.M-u: perl:url-select:select_next @@ -4664,14 +5099,26 @@ URxvt.color13: #AD7FA8 !URxvt.color6: #06989A !URxvt.color14: #34E2E2 ! orange (replaces cyan) -*color6: #ce5c00 -*color14: #fcaf3e +,*color6: #ce5c00 +,*color14: #fcaf3e ! White URxvt.color7: #D3D7CF URxvt.color15: #EEEEEC #+end_src +*** xkb us_ab keyboard layout + +#+begin_src conf :tangle "/sudo::/usr/share/X11/xkb/symbols/us_ab" :comments none +default partial alphanumeric_keys +xkb_symbols "us_ab" { + include "us(basic)" + name[Group1]= "English (US)(aminb)"; + + key { [ Alt_R ] }; +}; +#+end_src + ** XDG :PROPERTIES: :header-args+: :tangle ~/.config/user-dirs.dirs @@ -4798,7 +5245,7 @@ zhighlighters=(main brackets pattern) # # Load these ssh identities with the ssh module -zssh_ids=(id_ed25519_amin) +zssh_ids=(id_ed25519_bandali) # @@ -4861,6 +5308,8 @@ export MOZ_USE_XINPUT2=1 # precise scrolling in firefox #export JAVA_HOME=/usr/lib/jvm/java-8-openjdk #export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G" +export NIXPKGS=$HOME/src/git/nixpkgs + if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer #+end_src @@ -4911,7 +5360,7 @@ ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red') setopt globdots source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh -source ~/.zsh/zsh-autopair/autopair.zsh +# source ~/.zsh/zsh-autopair/autopair.zsh ### fzf ### @@ -4940,7 +5389,7 @@ alias mv="mv -iv" alias cp="cp -iv" alias scl=systemctl alias jcl=journalctl -alias m="mbsync -Va; getmail; notmuch new" +alias m="mbsync -a; getmail; notmuch new" alias best="youtube-dl -f best" alias nixx="ssh amin@nix.aminb.org" alias fence="ssh aminb@fencepost.gnu.org" @@ -4993,6 +5442,83 @@ fi printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60)) #+end_src +** my-i3status.py +:PROPERTIES: +:header-args+: :tangle ~/.local/bin/my-i3status.py :shebang "#!/usr/bin/env python2" +:END: + +#+begin_src python :comments none +# -*- coding: utf-8 -*- + +# This script is a simple wrapper which prefixes each i3status line with custom +# information. It is based on: +# https://github.com/i3/i3status/blob/master/contrib/wrapper.py +# +# In ~/.i3status.conf, add the following line: +# output_format = "i3bar" +# in the 'general' section. +# Then, in ~/.config/i3/config or ~/.config/sway/config add: +# status_command i3status | my-i3status.py +# in the 'bar' section. Make sure my-i3status.py is in $PATH. +# +# © 2012 Valentin Haenel +# © 2018 Amin Bandali +# +# This program is free software. It comes without any warranty, to the extent +# permitted by applicable law. You can redistribute it and/or modify it under +# the terms of the Do What The Fuck You Want To Public License (WTFPL), Version +# 2, as published by Sam Hocevar. See http://sam.zoy.org/wtfpl/COPYING for more +# details. + +import sys +import json +import os + +def get_nosleep(): + """ Return true if ~/.nosleep exists. """ + return os.path.isfile(os.path.expanduser("~/.nosleep")) + +def print_line(message): + """ Non-buffered printing to stdout. """ + sys.stdout.write(message + '\n') + sys.stdout.flush() + +def read_line(): + """ Interrupted respecting reader for stdin. """ + # try reading a line, removing any extra whitespace + try: + line = sys.stdin.readline().strip() + # i3status sends EOF, or an empty line + if not line: + sys.exit(3) + return line + # exit on ctrl-c + except KeyboardInterrupt: + sys.exit() + +if __name__ == '__main__': + # Skip the first line which contains the version header. + print_line(read_line()) + + # The second line contains the start of the infinite array. + print_line(read_line()) + + while True: + line, prefix = read_line(), '' + # ignore comma at start of lines + if line.startswith(','): + line, prefix = line[1:], ',' + + if get_nosleep(): + j = json.loads(line) + # insert information into the start of the json, but could be anywhere + j.insert(0, {'full_text' : '🖵 ', 'name' : 'nosleep'}) + # and echo back new encoded json + print_line(prefix+json.dumps(j)) + else: + print_line(prefix+line) +#+end_src + ** rofi-light :PROPERTIES: :header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash" @@ -5012,7 +5538,7 @@ light -S $val #+begin_src bash export _JAVA_AWT_WM_NONREPARENTING=1 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true' -light -Scrs "intel_backlight" 2 +light -Nr 2 source $HOME/.zprofile sway #+end_src