X-Git-Url: https://git.shemshak.org/gitweb.cgi/~bandali/configs/blobdiff_plain/40085087bfc85bf447146336efe4e4b8de44b572..d409a2cf33eead9b44cf95df4265c3274d8afe92:/rc.org?ds=inline
diff --git a/rc.org b/rc.org
index 8bf9622..7561980 100644
--- a/rc.org
+++ b/rc.org
@@ -389,6 +389,52 @@ wintypes:
};
#+end_src
+** dovecot
+:PROPERTIES:
+:header-args+: :tangle "/sudo::/etc/dovecot/dovecot.conf"
+:END:
+
+#+begin_src conf
+protocols = imap
+
+listen = 127.0.0.1
+log_path = /var/log/dovecot.log
+info_log_path = /var/log/dovecot-info.log
+
+ssl = no
+disable_plaintext_auth = no
+
+auth_verbose = yes
+auth_mechanisms = plain
+
+passdb {
+ driver = passwd-file
+ args = /etc/dovecot/passwd
+}
+
+userdb {
+ driver = static
+ args = uid=amin gid=amin home=/home/amin/mail/%d/%n
+ default_fields = mail=maildir:/home/amin/mail/%d/%n/mail
+}
+
+# mail_home = /home/amin/mail/%d/%n
+# mail_location = maildir:/home/amin/mail/%d/%n/mail:LAYOUT=fs:INBOX=/home/amin/mail/%d/%n/mail/Inbox
+
+# namespace {
+# inbox = yes
+# separator = /
+# }
+
+mail_plugins = $mail_plugins fts fts_lucene
+
+plugin {
+ fts = lucene
+ fts_lucene = whitespace_chars=@.
+ fts_autoindex = yes
+}
+#+end_src
+
** Dunst
:PROPERTIES:
:header-args+: :tangle ~/.config/dunst/dunstrc
@@ -625,9 +671,9 @@ timeout = 0
Helvetica
-
+
Liberation Sans
-
+
#+end_src
@@ -643,7 +689,7 @@ timeout = 0
[retriever]
type = SimplePOP3SSLRetriever
server = fencepost.gnu.org
-username = aminb
+username = bandali
password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
port = 995
use_apop = True
@@ -701,8 +747,8 @@ WantedBy=timers.target
#+begin_src conf
[user]
name = Amin Bandali
- email = amin@gnu.org
- signingkey = CDDE75F903538E71813CDA27D1FBA36627D65876
+ email = bandali@gnu.org
+ signingkey = BE6273738E616D6D1B3A08E8A21A020248816103
#+end_src
**** signing
@@ -781,7 +827,7 @@ WantedBy=timers.target
**** send-email
#+begin_src conf
[sendemail]
- smtpuser = aminb
+ smtpuser = bandali
smtpserver = fencepost.gnu.org
smtpserverport = 587
smtpencryption = tls
@@ -921,18 +967,21 @@ separator_width=0
general {
colors = true
interval = 5
+ output_format = "i3bar"
}
-order += "ipv6"
+# order += "ipv6"
order += "disk /"
+order += "disk /data"
order += "wireless _first_"
order += "ethernet _first_"
-order += "battery all"
+order += "battery 0"
+order += "volume master"
order += "load"
order += "tztime local"
wireless _first_ {
- format_up = "W: (%quality at %essid) %ip"
+ format_up = "W:%quality %essid %ip"
format_down = "W: down"
}
@@ -942,12 +991,24 @@ ethernet _first_ {
format_down = "E: down"
}
-battery all {
- format = "%status %percentage %remaining"
+battery 0 {
+ format = "%status %percentage %remaining (%consumption)"
+ path = "/sys/class/power_supply/BAT%d/uevent"
+ low_threshold = "10"
+ threshold_type = "percentage"
+ last_full_capacity = true
+ integer_battery_capacity = true
+ hide_seconds = true
}
tztime local {
- format = "%Y-%m-%d %H:%M:%S"
+ format = "%-I:%M%P %a %b %d"
+}
+
+volume master {
+ format = "⪠%volume"
+ format_muted = "ð %volume"
+ device = "pulse"
}
load {
@@ -955,7 +1016,11 @@ load {
}
disk "/" {
- format = "%avail"
+ format = "/ %avail"
+}
+
+disk "/data" {
+ format = "/data %avail"
}
#+end_src
@@ -969,10 +1034,12 @@ disk "/" {
#+begin_src conf
# Global defaults
CopyArrivalDate yes
+Create Both
+Expunge Both
######
IMAPAccount amin
-Host nix.aminb.org
+Host mail.aminb.org
User amin@aminb.org
PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
SSLType IMAPS
@@ -980,17 +1047,20 @@ SSLType IMAPS
IMAPStore amin-remote
Account amin
-MaildirStore amin-local
-Path ~/mail/amin/
-Inbox ~/mail/amin/Inbox
-SubFolders Verbatim
+IMAPAccount amin-dovecot
+Host 127.0.0.1
+Port 143
+User amin@aminb.org
+PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin-dovecot.gpg"
+SSLType None
+
+IMAPStore amin-local
+Account amin-dovecot
Channel amin
Master :amin-remote:
Slave :amin-local:
-Patterns * !dovecot*
-Create Both
-SyncState *
+Patterns *
######
IMAPAccount uwaterloo
@@ -1002,17 +1072,20 @@ SSLType IMAPS
IMAPStore uwaterloo-remote
Account uwaterloo
-MaildirStore uwaterloo-local
-Path ~/mail/uwaterloo/
-Inbox ~/mail/uwaterloo/Inbox
-SubFolders Verbatim
+IMAPAccount uwaterloo-dovecot
+Host 127.0.0.1
+Port 143
+User abandali@uwaterloo.ca
+PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo-dovecot.gpg"
+SSLType None
+
+IMAPStore uwaterloo-local
+Account uwaterloo-dovecot
Channel uwaterloo
Master :uwaterloo-remote:
Slave :uwaterloo-local:
-Patterns * !dovecot*
-Create Both
-SyncState *
+Patterns *
#+end_src
*** mbsync.service
@@ -1516,9 +1589,9 @@ logfile ~/.msmtp.log
# aminb
account aminb
-host nix.aminb.org
+host mail.aminb.org
# use `msmtp -a aminb --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
-tls_fingerprint 98:C7:F0:02:7F:2B:D8:B6:D3:BF:E8:C1:D4:07:6B:B5:6C:B1:C7:5D:97:20:70:88:AB:9E:B5:09:5D:2C:DC:8E
+tls_fingerprint C7:A4:2E:A3:11:FA:80:45:C4:29:D6:62:4D:73:DB:34:43:67:8F:16:F1:2E:54:43:06:1B:41:B6:A9:09:E0:37
tls_starttls on
from amin@aminb.org
user amin@aminb.org
@@ -1528,17 +1601,17 @@ passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
account gnu
host fencepost.gnu.org
# use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
-tls_fingerprint 28:70:42:76:1C:EC:91:5F:D1:B3:27:A1:CD:3B:32:A4:8B:0B:DC:3A:CD:CA:F6:6F:E4:61:BA:69:D7:4D:0D:0B
+tls_fingerprint 93:59:52:1D:A6:95:13:31:7C:81:ED:DB:A5:BA:B5:2B:C8:BC:38:3E:71:A5:DF:8C:80:46:C1:E0:5D:2D:F4:E3
tls_starttls on
-from aminb@gnu.org
-user aminb
+from bandali@gnu.org
+user bandali
passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
-# gnu (amin)
+# gnu (old)
+account gnu-aminb : gnu
+from aminb@gnu.org
account gnu-amin : gnu
from amin@gnu.org
-
-# gnu (mab)
account gnu-mab : gnu
from mab@gnu.org
@@ -2153,7 +2226,7 @@ def_key "K"
# configured here named ".notmuch".
#
[database]
-path=/home/amin/mail
+path=/home/amin/oldmail
# User configuration
#
@@ -2173,7 +2246,7 @@ path=/home/amin/mail
[user]
name=Amin Bandali
primary_email=amin@aminb.org
-other_email=amin@gnu.org;abandali@uwaterloo.ca;mab@gnu.org;aminb@gnu.org;
+other_email=bandali@gnu.org;abandali@uwaterloo.ca;
# Configuration for "notmuch new"
#
@@ -2259,7 +2332,7 @@ sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
#+begin_src sh
# apply sent tag to messages sent by me
-notmuch tag -new +sent -- from:amin@aminb.org or from:amin@gnu.org or from:mab@gnu.org or from:aminb@gnu.org or from:abandali@uwaterloo.ca
+notmuch tag -new +sent -- from:amin@aminb.org or from:bandali@gnu.org or from:aminb@gnu.org or from:amin@gnu.org or from:mab@gnu.org or from:abandali@uwaterloo.ca
# initial tagging
notmuch tag -latest -- tag:latest
@@ -2272,14 +2345,19 @@ notmuch tag +inbox +unread +latest -new -- tag:new
notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
notmuch tag -inbox +lists/haskell-weekly -- folder:amin/lists/haskell-weekly
-notmuch tag -inbox +pay -- folder:amin/pay
+notmuch tag -inbox +pay -- folder:amin/pay
notmuch tag -inbox +banking -- folder:amin/banking
+notmuch tag -inbox +work -- folder:amin/work
#
#
-notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
-notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
+notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
+notmuch tag -inbox +uw/cs846 -- folder:uwaterloo/lists/cs846
+notmuch tag -inbox +uw/ece750 -- folder:uwaterloo/lists/ece750
+notmuch tag -inbox +uw/se212 -- folder:uwaterloo/lists/se212
+notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
+notmuch tag -inbox +lists/alloytools -- folder:uwaterloo/lists/alloytools
notmuch tag -inbox +lists/clvsingle -- folder:uwaterloo/lists/Clvsingle
notmuch tag -inbox +lists/gsa -- folder:uwaterloo/lists/GSA
notmuch tag -inbox +lists/math-grad -- folder:uwaterloo/lists/Math-grad
@@ -3639,10 +3717,11 @@ adjustment-method=randr
:END:
#+begin_src conf
-rofi.font: Ubuntu Mono 13
+! rofi.font: Ubuntu Mono 13
! rofi.font: Inconsolata 16
! rofi.font: Iosevka 13
! rofi.font: Source Code Pro 11
+rofi.font: Source Code Pro 10.5
rofi.modi: run,window
! rofi.width: 640
rofi.width: 600
@@ -3741,13 +3820,13 @@ insert_pass="Alt+n"
#+end_src
** sway
+
+*** main
:PROPERTIES:
:header-args+: :tangle ~/.config/sway/config
:END:
#+begin_src conf
-exec xrdb .Xresources
-exec dunst
### Variables
# super
set $mod Mod4
@@ -3772,35 +3851,11 @@ output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
# You can get the names of your outputs by running: swaymsg -t get_outputs
### Idle configuration
-#
-# Example configuration:
-#
-#exec swayidle \
-# timeout 300 'swaylock -c 000000' \
-# timeout 600 'swaymsg "output * dpms off"' \
-# resume 'swaymsg "output * dpms on"' \
-# before-sleep 'swaylock -c 000000'
-#
-# This will lock your screen after 300 seconds of inactivity, then turn off
-# your displays after another 600 seconds, and turn your screens back on when
-# resumed. It will also lock your screen before your computer goes to sleep.
-### Input configuration
-
-input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
- dwt enabled
- tap enabled
- natural_scroll enabled
- middle_emulation enabled
- click_method clickfinger
-}
-
-input "1:1:AT_Translated_Set_2_keyboard" {
- repeat_delay 200
- repeat_rate 45
- xkb_layout us,ir
- xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
-}
+exec swayidle \
+ timeout 120 '[ -f ~/.nosleep ] || swaymsg "output * dpms off"' \
+ resume '[ -f ~/.nosleep ] || swaymsg "output * dpms on"' \
+ before-sleep swaylock
### Key bindings
@@ -3817,7 +3872,7 @@ input "1:1:AT_Translated_Set_2_keyboard" {
bindsym $mod+d exec $menu
# password manager
- bindsym $mod+$mod2+space exec rofi-pass
+ bindsym $mod2+space exec rofi-pass
# Drag floating windows by holding down $mod and left mouse button.
# Resize them with right mouse button + $mod.
@@ -3841,6 +3896,8 @@ input "1:1:AT_Translated_Set_2_keyboard" {
bindsym XF86AudioMute exec pamixer --toggle-mute
bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
+ bindsym $mod+Shift+apostrophe exec rofi-remmina.py # choose remmina connection
+
# original sway workspace switch and window move
bindsym $mod+bracketleft workspace prev
bindsym $mod+bracketright workspace next
@@ -3965,6 +4022,59 @@ mode "resize" {
}
bindsym $mod+Shift+r mode "resize"
+#
+# Power button
+#
+
+set $mode_system System (l)ock, (e)xit sway, (s)uspend, (h)ibernate, (r)eboot, (S)hutdown
+mode "$mode_system" {
+ bindsym l exec swaylock, mode "default"
+ bindsym e exec swaymsg exit, mode "default"
+ bindsym s exec systemctl suspend, mode "default"
+ bindsym h exec systemctl hibernate, mode "default"
+ bindsym r exec systemctl reboot, mode "default"
+ bindsym Shift+s exec systemctl poweroff -i, mode "default"
+
+ # back to normal: Enter, Escape, or q
+ bindsym Return mode "default"
+ bindsym Escape mode "default"
+ bindsym q mode "default"
+}
+bindsym XF86PowerOff mode "$mode_system"
+
+#
+# Presentation mode
+#
+
+bindsym $mod+$mod2+p exec ([ ! -e ~/.nosleep ] && touch ~/.nosleep || rm ~/.nosleep) && killall -USR1 i3status
+
+#
+# Notifications
+#
+
+bindsym $mod+Shift+n mode notifications
+mode notifications {
+ bindsym Return exec makoctl invoke; exec makoctl dismiss; mode default
+ bindsym d exec makoctl dismiss; mode default
+ bindsym Shift+d exec makoctl dismiss -a; mode default
+
+ bindsym Escape mode default
+ bindsym q mode default
+}
+
+#
+# Screenshotting
+#
+
+bindsym $mod+Shift+s mode screenshot
+mode screenshot {
+ bindsym a exec grim $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
+ bindsym r exec slurp | grim -g - $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
+
+ bindsym Escape mode default
+ bindsym q mode default
+}
+
#
# Status Bar:
#
@@ -3976,18 +4086,400 @@ bar {
background #323232
inactive_workspace #32323200 #32323200 #5c5c5c
}
- status_command i3status
+ status_command i3status | my-i3status.py
}
+# font pango: benis uushi 9
+# font pango: Ubuntu Mono 11
+# font pango: Inconsolata 11
+font pango: DejaVu Sans Mono 9
+# font pango: Liberation Mono 9
+
+exec xrdb .Xresources
+exec pgrep -x "systemd-inhibit" || \
+ systemd-inhibit --what=handle-power-key --who=aminb \
+ --why="Handle power button in sway" sleep infinity
+exec mako 2>&1 >/tmp/mako.log
+exec /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
+
include /etc/sway/config.d/*
+include ~/.config/sway/`hostname`
+
+exec systemd-notify --ready || true
+
+#+end_src
+
+*** langa
+:PROPERTIES:
+:header-args+: :tangle ~/.config/sway/langa
+:END:
+
+#+begin_src conf
+input "2:7:SynPS/2_Synaptics_TouchPad" {
+ events disabled
+ dwt enabled
+ tap enabled
+ natural_scroll enabled
+ click_method clickfinger
+}
+
+input "1:1:AT_Translated_Set_2_keyboard" {
+ repeat_delay 200
+ repeat_rate 45
+ xkb_layout us_ab,ir
+ xkb_options ctrl:nocaps,altwin:swap_alt_win,grp:shifts_toggle
+}
+#+end_src
+
+*** shemshak
+:PROPERTIES:
+:header-args+: :tangle ~/.config/sway/shemshak
+:END:
+
+#+begin_src conf
+input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
+ dwt enabled
+ tap enabled
+ natural_scroll enabled
+ middle_emulation enabled
+ click_method clickfinger
+}
+
+input "1:1:AT_Translated_Set_2_keyboard" {
+ repeat_delay 200
+ repeat_rate 45
+ xkb_layout us,ir
+ xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
+}
+#+end_src
+** swaylock
+:PROPERTIES:
+:header-args+: :tangle ~/.config/swaylock/config
+:END:
+
+#+begin_src conf
+image=/home/amin/usr/pics/wp/wp2445784-blurred-wallpapers.jpg
+scaling=fill
#+end_src
** TLP
-*** TODO enigma
-*** archy
+*** langa
+
+#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "langa")) "/sudo::/etc/default/tlp")
+# ------------------------------------------------------------------------------
+# tlp - Parameters for power saving
+# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
+
+# Hint: some features are disabled by default, remove the leading # to enable
+# them.
+
+# Set to 0 to disable, 1 to enable TLP.
+TLP_ENABLE=1
+
+# Operation mode when no power supply can be detected: AC, BAT.
+# Concerns some desktop and embedded hardware only.
+TLP_DEFAULT_MODE=AC
+
+# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
+# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
+TLP_PERSISTENT_DEFAULT=0
+
+# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
+# Non-zero value enables, zero disables laptop mode.
+DISK_IDLE_SECS_ON_AC=0
+DISK_IDLE_SECS_ON_BAT=2
+
+# Dirty page values (timeouts in secs).
+MAX_LOST_WORK_SECS_ON_AC=15
+MAX_LOST_WORK_SECS_ON_BAT=60
+
+# Hint: CPU parameters below are disabled by default, remove the leading #
+# to enable them, otherwise kernel default values are used.
+
+# Select a CPU frequency scaling governor.
+# Intel Core i processor with intel_pstate driver:
+# powersave(*), performance.
+# Older hardware with acpi-cpufreq driver:
+# ondemand(*), powersave, performance, conservative, schedutil.
+# (*) is recommended.
+# Hint: use tlp-stat -p to show the active driver and available governors.
+# Important:
+# powersave for intel_pstate and ondemand for acpi-cpufreq are power
+# efficient for *almost all* workloads and therefore kernel and most
+# distributions have chosen them as defaults. If you still want to change,
+# you should know what you're doing! You *must* disable your distribution's
+# governor settings or conflicts will occur.
+#CPU_SCALING_GOVERNOR_ON_AC=powersave
+#CPU_SCALING_GOVERNOR_ON_BAT=powersave
+
+# Set the min/max frequency available for the scaling governor.
+# Possible values strongly depend on your CPU. For available frequencies see
+# the output of tlp-stat -p.
+#CPU_SCALING_MIN_FREQ_ON_AC=0
+#CPU_SCALING_MAX_FREQ_ON_AC=0
+#CPU_SCALING_MIN_FREQ_ON_BAT=0
+#CPU_SCALING_MAX_FREQ_ON_BAT=0
+
+# Set energy performance hints (HWP) for Intel P-state governor:
+# performance, balance_performance, default, balance_power, power
+# Values are given in order of increasing power saving.
+# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
+CPU_HWP_ON_AC=balance_performance
+CPU_HWP_ON_BAT=balance_power
+
+# Set Intel P-state performance: 0..100 (%).
+# Limit the max/min P-state to control the power dissipation of the CPU.
+# Values are stated as a percentage of the available performance.
+# Requires an Intel Core i processor with intel_pstate driver.
+#CPU_MIN_PERF_ON_AC=0
+#CPU_MAX_PERF_ON_AC=100
+#CPU_MIN_PERF_ON_BAT=0
+#CPU_MAX_PERF_ON_BAT=30
+
+# Set the CPU "turbo boost" feature: 0=disable, 1=allow
+# Requires an Intel Core i processor.
+# Important:
+# - This may conflict with your distribution's governor settings
+# - A value of 1 does *not* activate boosting, it just allows it
+#CPU_BOOST_ON_AC=1
+#CPU_BOOST_ON_BAT=0
+
+# Minimize number of used CPU cores/hyper-threads under light load conditions:
+# 0=disable, 1=enable.
+SCHED_POWERSAVE_ON_AC=0
+SCHED_POWERSAVE_ON_BAT=1
+
+# Kernel NMI Watchdog:
+# 0=disable (default, saves power), 1=enable (for kernel debugging only).
+NMI_WATCHDOG=0
+
+# Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
+# Frequency voltage pairs are written to:
+# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
+# CAUTION: only use this, if you thoroughly understand what you are doing!
+#PHC_CONTROLS="F:V F:V F:V F:V"
+
+# Set CPU performance versus energy savings policy:
+# performance, balance-performance, default, balance-power, power.
+# Values are given in order of increasing power saving.
+# Requires kernel module msr and x86_energy_perf_policy from linux-tools.
+ENERGY_PERF_POLICY_ON_AC=performance
+ENERGY_PERF_POLICY_ON_BAT=balance-power
+
+# Disk devices; separate multiple devices with spaces (default: sda).
+# Devices can be specified by disk ID also (lookup with: tlp diskid).
+DISK_DEVICES="sda sdb"
+
+# Disk advanced power management level: 1..254, 255 (max saving, min, off).
+# Levels 1..127 may spin down the disk; 255 allowable on most drives.
+# Separate values for multiple disks with spaces. Use the special value 'keep'
+# to keep the hardware default for the particular disk.
+DISK_APM_LEVEL_ON_AC="254 254"
+DISK_APM_LEVEL_ON_BAT="128 128"
+
+# Hard disk spin down timeout:
+# 0: spin down disabled
+# 1..240: timeouts from 5s to 20min (in units of 5s)
+# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
+# See 'man hdparm' for details.
+# Separate values for multiple disks with spaces. Use the special value 'keep'
+# to keep the hardware default for the particular disk.
+#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
+#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
+
+# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
+# Separate values for multiple disks with spaces. Use the special value 'keep'
+# to keep the kernel default scheduler for the particular disk.
+#DISK_IOSCHED="cfq cfq"
+
+# AHCI link power management (ALPM) for disk devices:
+# min_power, med_power_with_dipm(*), medium_power, max_performance.
+# (*) Kernel >= 4.15 required, then recommended.
+# Multiple values separated with spaces are tried sequentially until success.
+SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
+SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
+
+# Exclude host devices from AHCI link power management.
+# Separate multiple hosts with spaces.
+#SATA_LINKPWR_BLACKLIST="host1"
+
+# Runtime Power Management for AHCI host and disks devices:
+# on=disable, auto=enable.
+# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
+#AHCI_RUNTIME_PM_ON_AC=on
+#AHCI_RUNTIME_PM_ON_BAT=on
+
+# Seconds of inactivity before disk is suspended.
+AHCI_RUNTIME_PM_TIMEOUT=15
+
+# PCI Express Active State Power Management (PCIe ASPM):
+# default, performance, powersave.
+PCIE_ASPM_ON_AC=performance
+PCIE_ASPM_ON_BAT=powersave
+
+# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
+# auto = mid on BAT, high on AC; default = use hardware defaults.
+RADEON_POWER_PROFILE_ON_AC=high
+RADEON_POWER_PROFILE_ON_BAT=low
+
+# Radeon dynamic power management method (DPM): battery, performance.
+RADEON_DPM_STATE_ON_AC=performance
+RADEON_DPM_STATE_ON_BAT=battery
+
+# Radeon DPM performance level: auto, low, high; auto is recommended.
+RADEON_DPM_PERF_LEVEL_ON_AC=auto
+RADEON_DPM_PERF_LEVEL_ON_BAT=auto
+
+# WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
+WIFI_PWR_ON_AC=off
+WIFI_PWR_ON_BAT=on
+
+# Disable wake on LAN: Y/N.
+WOL_DISABLE=Y
+
+# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
+# A value of 0 disables, >=1 enables power saving (recommended: 1).
+SOUND_POWER_SAVE_ON_AC=0
+SOUND_POWER_SAVE_ON_BAT=0
+
+# Disable controller too (HDA only): Y/N.
+SOUND_POWER_SAVE_CONTROLLER=N
+
+# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
+# Drive can be powered on again by releasing (and reinserting) the eject lever
+# or by pressing the disc eject button on newer models.
+# Note: an UltraBay/MediaBay hard disk is never powered off.
+BAY_POWEROFF_ON_AC=0
+BAY_POWEROFF_ON_BAT=0
+# Optical drive device to power off (default sr0).
+BAY_DEVICE="sr0"
+
+# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
+RUNTIME_PM_ON_AC=on
+RUNTIME_PM_ON_BAT=auto
+
+# Exclude PCI(e) device adresses the following list from Runtime PM
+# (separate with spaces). Use lspci to get the adresses (1st column).
+#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
+
+# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
+# Default when unconfigured is "amdgpu nouveau nvidia radeon" which
+# prevents accidential power-on of dGPU in hybrid graphics setups.
+# Use "" to disable the feature completely.
+# Separate multiple drivers with spaces.
+#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
+
+# Set to 0 to disable, 1 to enable USB autosuspend feature.
+USB_AUTOSUSPEND=1
+
+# Exclude listed devices from USB autosuspend (separate with spaces).
+# Use lsusb to get the ids.
+# Note: input devices (usbhid) are excluded automatically
+#USB_BLACKLIST="1111:2222 3333:4444"
+
+# Bluetooth devices are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude.
+USB_BLACKLIST_BTUSB=0
+
+# Phone devices are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude (enable charging).
+USB_BLACKLIST_PHONE=0
+
+# Printers are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude.
+USB_BLACKLIST_PRINTER=1
+
+# WWAN devices are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude.
+USB_BLACKLIST_WWAN=1
+
+# Include listed devices into USB autosuspend even if already excluded
+# by the blacklists above (separate with spaces).
+# Use lsusb to get the ids.
+#USB_WHITELIST="1111:2222 3333:4444"
+
+# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
+# (workaround for USB devices that cause shutdown problems).
+#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
+
+# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
+# on system startup: 0=disable, 1=enable.
+# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
+# are ignored when this is enabled!
+#RESTORE_DEVICE_STATE_ON_STARTUP=0
+RESTORE_DEVICE_STATE_ON_STARTUP=0
+
+# Radio devices to disable on startup: bluetooth, wifi, wwan.
+# Separate multiple devices with spaces.
+#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
+DEVICES_TO_DISABLE_ON_STARTUP="bluetooth"
+
+# Radio devices to enable on startup: bluetooth, wifi, wwan.
+# Separate multiple devices with spaces.
+#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
+
+# Radio devices to disable on shutdown: bluetooth, wifi, wwan.
+# (workaround for devices that are blocking shutdown).
+#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
+
+# Radio devices to enable on shutdown: bluetooth, wifi, wwan.
+# (to prevent other operating systems from missing radios).
+#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
-#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "archy")) "/sudo::/etc/default/tlp")
+# Radio devices to enable on AC: bluetooth, wifi, wwan.
+#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
+
+# Radio devices to disable on battery: bluetooth, wifi, wwan.
+#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
+
+# Radio devices to disable on battery when not in use (not connected):
+# bluetooth, wifi, wwan.
+#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
+
+# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
+# required). Charging starts when the remaining capacity falls below the
+# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
+# Main / Internal battery (values in %)
+#START_CHARGE_THRESH_BAT0=75
+#STOP_CHARGE_THRESH_BAT0=80
+# Ultrabay / Slice / Replaceable battery (values in %)
+#START_CHARGE_THRESH_BAT1=75
+#STOP_CHARGE_THRESH_BAT1=80
+
+# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
+#RESTORE_THRESHOLDS_ON_BAT=1
+
+# ------------------------------------------------------------------------------
+# tlp-rdw - Parameters for the radio device wizard
+# Possible devices: bluetooth, wifi, wwan.
+
+# Hints:
+# - Parameters are disabled by default, remove the leading # to enable them
+# - Separate multiple radio devices with spaces
+
+# Radio devices to disable on connect.
+#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
+#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
+#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
+
+# Radio devices to enable on disconnect.
+#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
+#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
+#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
+
+# Radio devices to enable/disable when docked.
+#DEVICES_TO_ENABLE_ON_DOCK=""
+#DEVICES_TO_DISABLE_ON_DOCK=""
+
+# Radio devices to enable/disable when undocked.
+#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
+#DEVICES_TO_DISABLE_ON_UNDOCK=""
+#+end_src
+
+*** shemshak
+
+#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "shemshak")) "/sudo::/etc/default/tlp")
# ------------------------------------------------------------------------------
# tlp - Parameters for power saving
# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
@@ -4528,7 +5020,8 @@ Emacs.FontBackend: xft,x
! Emacs.font: Inconsolata:size=16
! Emacs.font: Inconsolata LGC:size=14
! Emacs.font: Source Code Pro Medium-10.5
-Emacs.font: Ubuntu Mono:size=16
+Emacs.font: Source Code Pro:size=14
+! Emacs.font: Ubuntu Mono:size=16
! Emacs.font: Iosevka:size=16
#+end_src
@@ -4539,10 +5032,10 @@ Emacs.font: Ubuntu Mono:size=16
#+begin_src conf-xdefaults
! Font
-URxvt.font: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
-URxvt.boldFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
-URxvt.italicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
-URxvt.bolditalicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
+URxvt.font: xft:source code pro:pixelsize=14:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
+URxvt.boldFont: xft:source code pro semibold:pixelsize=14:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
+URxvt.italicFont: xft:source code pro italic:pixelsize=14:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
+URxvt.bolditalicFont: xft:source code pro semibold italic:pixelsize=14:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
URxvt.xftAntialias: true
URxvt.letterSpace: 0
@@ -4561,8 +5054,6 @@ URxvt.keysym.Shift-Up: command:\033]720;1\007
URxvt.keysym.Shift-Down: command:\033]721;1\007
URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select
-URxvt.perl-ext: bidi
-URxvt.bidi.enabled: 1
URxvt.url-select.launcher: firefox
URxvt.url-select.underline: true
URxvt.keysym.M-u: perl:url-select:select_next
@@ -4664,14 +5155,26 @@ URxvt.color13: #AD7FA8
!URxvt.color6: #06989A
!URxvt.color14: #34E2E2
! orange (replaces cyan)
-*color6: #ce5c00
-*color14: #fcaf3e
+,*color6: #ce5c00
+,*color14: #fcaf3e
! White
URxvt.color7: #D3D7CF
URxvt.color15: #EEEEEC
#+end_src
+*** xkb us_ab keyboard layout
+
+#+begin_src conf :tangle "/sudo::/usr/share/X11/xkb/symbols/us_ab" :comments none
+default partial alphanumeric_keys
+xkb_symbols "us_ab" {
+ include "us(basic)"
+ name[Group1]= "English (US)(aminb)";
+
+ key