X-Git-Url: https://git.shemshak.org/gitweb.cgi/~bandali/configs/blobdiff_plain/590276739114ee21891a9aab06a05938d80db544..86dd267a49359f68d64da9fae11f2b30a8fa907f:/rc.org?ds=sidebyside diff --git a/rc.org b/rc.org index 478e3b8..a45fcfe 100644 --- a/rc.org +++ b/rc.org @@ -1,5 +1,5 @@ #+title: rc.org -#+property: header-args :comments link :mkdirp yes :results silent +#+property: header-args :comments no :mkdirp yes :results silent * About @@ -12,614 +12,7 @@ Note: This file is best viewed inside Emacs with org mode. * Configs This section contains the configuration files (dotfiles) of various -programs I use. - -** [[https://github.com/afewmail/afew][afew]] -:PROPERTIES: -:header-args+: :tangle ~/.config/afew/config -:END: - -#+begin_quote -an initial tagging script for notmuch mail -#+end_quote - -#+begin_src conf -# This is the default filter chain -[SpamFilter] -#[ClassifyingFilter] -[KillThreadsFilter] -#[ListMailsFilter] -[ArchiveSentMailsFilter] -sent_tag = sent -[InboxFilter] - -#[Filter.1] -#query = 'folder:amin/lists/.haskell-cafe' -#tags = +lists;+lists/haskell-cafe -#message = lists/haskell-cafe - -#[Filter.2] -#query = 'folder:amin/lists/.haskell-weekly' -#tags = +lists;+lists/haskell-weekly -#message = lists/haskell-weekly - -#[Filter.3] -#query = 'folder:amin/lists/.hackernewsletter' -#tags = +lists;+lists/hackernewsletter -#message = lists/hackernewsletter - - -#[FolderNameFilter] -#folder_blacklist = Inbox -#maildir_separator = /. -#folder_transforms = Drafts:draft Junk:spam Trash:deleted Sent:sent Archive:archive lists/haskell-cafe:lists/haskell-cafe -#+end_src - -** bspwm - -*** bspwmrc -:PROPERTIES: -:header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh" -:END: - -#+begin_src sh -sxhkd & -sh ~/.fehbg & -xfce4-panel -d & -#compton & -sleep 0.5 && pasystray --notify=all & - -bspc monitor -d I II III IV V VI VII VIII IX X -#bspc monitor eDP-1 -d I II III IV V -#bspc monitor HDMI-1 -d VI VII VIII IX X - -#bspc config border_width 2 -#bspc config window_gap 8 -bspc config window_gap 0 - -bspc config bottom_padding 26 - -bspc config split_ratio 0.52 -bspc config borderless_monocle true -bspc config gapless_monocle true -bspc config click_to_focus button1 -bspc config directional_focus_tightness low - -bspc rule -a Firefox desktop='^1' follow=on -bspc rule -a Nightly desktop='^1' follow=on -bspc rule -a Emacs desktop='^2' state=tiled follow=on -#bspc rule -a Chromium desktop='^4' follow=on -bspc rule -a URxvt state=floating -bspc rule -a URxvt:tiled state=tiled -bspc rule -a Connman-gtk state=floating -bspc rule -a Xfce4-panel state=floating -bspc rule -a TelegramDesktop state=floating -bspc rule -a Ec state=floating -bspc rule -a Pavucontrol state=floating -bspc rule -a Eog state=floating -bspc rule -a Seahorse state=floating -bspc rule -a mpv state=floating -bspc rule -a Evince state=floating -bspc rule -a Meld state=floating -bspc rule -a Autokey-gtk state=floating -bspc rule -a Mousepad state=floating -bspc rule -a Wrapper-1.0 state=floating -bspc rule -a File-roller state=floating -bspc rule -a Gnome-disks state=floating -bspc rule -a Termite state=floating -bspc rule -a Termite:tiled state=tiled -bspc rule -a Thunderbird:Calendar state=floating -bspc rule -a Audacity state=floating -bspc rule -a Proof state=floating # pvs x-show-proof -bspc rule -a Nm-connection-editor state=floating -bspc rule -a Wire state=floating -bspc rule -a discord state=floating -bspc rule -a X2goclient state=floating -bspc rule -a SimpleScreenRecorder state=floating -bspc rule -a Gimp state=floating -bspc rule -a Wrapper-2.0 state=floating -bspc rule -a Zathura state=tiled -#+end_src - -*** sxhkdrc -:PROPERTIES: -:header-args+: :tangle ~/.config/sxhkd/sxhkdrc -:END: - -#+begin_src conf -# -# wm independent hotkeys -# - -# terminal emulator -super + {_,shift} + Return - urxvt{_, -name tiled} - -#super + {_,shift} + Return -# termite{_, --name=tiled} - -# program launcher -super + space - rofi -show run -display-run '> ' -display-window ' 🗔 ' - -super + alt + space - xfce4-popup-whiskermenu - -# window finder -super + backslash - rofi -show window -display-run '> ' -display-window ' 🗔 ' - -# password manager -alt + space - rofi-pass - -# firefox -#super + r -# firefox - -# chromium -#super + c -# chromium -incognito - -# emacs -super + e - emacs - -# make sxhkd reload its configuration files: -super + Escape - pkill -USR1 -x sxhkd - -# volume {up,down} -XF86Audio{Raise,Lower}Volume - pamixer --allow-boost --{in,de}crease 5 - -# mute -XF86AudioMute - pamixer --toggle-mute - -# playback control -XF86Audio{Play,Prev,Next} - mpc {toggle,prev,next} - -# lock the screen -super + shift + q - light-locker-command -l - -# Toggle keyboard layout -super + F7 - toggle-layout - -# Toggle Xfce presentation mode -XF86LaunchB - toggle-presentation-mode - -# monitor brightness -XF86MonBrightness{Up,Down} - light -{A,U} 5 - -super + apostrophe - rofi-light - -# keyboard brightness -#XF86KbdBrightness{Up,Down} -# kbdlight {up,down} - -# -# bspwm hotkeys -# - -# quit bspwm normally -super + alt + Escape - bspc quit - -# close and kill -super + {w,q} - bspc node -{c,k} - -# alternate between the tiled and monocle layout -super + m - bspc desktop -l next - -# send the newest marked node to the newest preselected node -super + y - bspc node newest.marked.local -n newest.!automatic.local - -# swap the current node and the biggest node -super + g - bspc node -s biggest - -# -# state/flags -# - -# set the window state -super + {t,shift + t,s,f} - bspc node -t {tiled,pseudo_tiled,floating,fullscreen} - -# set the node flags -super + ctrl + {m,x,y,z} - bspc node -g {marked,locked,sticky,private} - -# -# focus/swap -# - -# focus the node in the given direction -super + {_,shift + }{h,j,k,l} - bspc node -{f,s} {west,south,north,east} - -# focus the node for the given path jump -super + {p,b,comma,period} - bspc node -f @{parent,brother,first,second} - -# focus the next/previous node in the current desktop -super + {_,shift + }c - bspc node -f {next,prev}.local - -# focus the next/previous desktop in the current monitor -super + bracket{left,right} - bspc desktop -f {prev,next}.local - -# send to next/prev desktop -super + shift + bracket{left,right} - bspc node -d {prev,next} --follow - -# focus the last node/desktop -super + {grave,Tab} - bspc {node,desktop} -f last - -# focus the older or newer node in the focus history -super + {o,i} - bspc wm -h off; \ - bspc node {older,newer} -f; \ - bspc wm -h on - -# focus or send to the given desktop -super + {_,shift + }{1-9,0} - bspc {desktop -f,node -d} '^{1-9,10}' - -# -# preselect -# - -# preselect the direction -super + ctrl + {h,j,k,l} - bspc node -p {west,south,north,east} - -# preselect the ratio -super + ctrl + {1-9} - bspc node -o 0.{1-9} - -# cancel the preselection for the focused node -super + ctrl + space - bspc node -p cancel - -# cancel the preselection for the focused desktop -super + ctrl + shift + space - bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel - -# -# move/resize -# - -# expand a window by moving one of its side outward -super + alt + {h,j,k,l} - bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0} - -# contract a window by moving one of its side inward -super + alt + shift + {h,j,k,l} - bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0} - -# move a floating window -super + {Left,Down,Up,Right} - bspc node -v {-20 0,0 20,0 -20,20 0} - -#alt + bracket{left,right} -# xdotool key --clearmodifiers ctrl+Page_{Up,Down} -#+end_src - -** compton -:PROPERTIES: -:header-args+: :tangle ~/.config/compton.conf -:END: - -#+begin_src conf -# Shadow -shadow = false; # Enabled client-side shadows on windows. -no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows. -no-dnd-shadow = true; # Don't draw shadows on DND windows. -clear-shadow = true; # Zero the part of the shadow's mask behind the - # window. Fix some weirdness with ARGB windows. -shadow-radius = 5; # The blur radius for shadows. (default 12) -shadow-offset-x = -5; # The left offset for shadows. (default -15) -shadow-offset-y = -5; # The top offset for shadows. (default -15) -# shadow-opacity = 0.7; # The translucency for shadows. (default .75) -# shadow-red = 0.0; # Red color value of shadow. (0.0 - 1.0, defaults to 0) -# shadow-green = 0.0; # Green color value of shadow. (0.0 - 1.0, defaults to 0) -# shadow-blue = 0.0; # Blue color value of shadow. (0.0 - 1.0, defaults to 0) -shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ]; # Exclude conditions for shadows. -# shadow-exclude = "n:e:Notification"; -#shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications -shadow-ignore-shaped = true; # Avoid drawing shadow on all shaped windows - # (see also: --detect-rounded-corners) - -# Opacity -menu-opacity = 1.0; # The opacity for menus. (default 1.0) -#inactive-opacity = 0.9; # Default opacity of inactive windows. (0.0 - 1.0) -# active-opacity = 0.8; # Default opacity for active windows. (0.0 - 1.0) -frame-opacity = 1.0; # Opacity of window titlebars and borders. (0.1 - 1.0) -# inactive-opacity-override = true; # Let inactive opacity set by 'inactive-opacity' overrides - # value of _NET_WM_OPACITY. Bad choice. -alpha-step = 0.06; # XRender backend: Step size for alpha pictures. Increasing - # it may result in less X resource usage, - # Yet fading may look bad. -#inactive-dim = 0.5; # Dim inactive windows. (0.0 - 1.0) -#inactive-dim-fixed = true; # Do not let dimness adjust based on window opacity. -# blur-background = true; # Blur background of transparent windows. - # Bad performance with X Render backend. - # GLX backend is preferred. -# blur-background-frame = true; # Blur background of opaque windows with transparent - # frames as well. -blur-background-fixed = true; # Do not let blur radius adjust based on window opacity. -blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ]; - # Exclude conditions for background blur. - -# Fading -fading = false; # Fade windows during opacity changes. -fade-delta = 3; # The time between steps in a fade in milliseconds. (default 10). -fade-in-step = 0.03; # Opacity change between steps while fading in. (default 0.028). -fade-out-step = 0.03; # Opacity change between steps while fading out. (default 0.03). -# no-fading-openclose = true; # Avoid fade windows in/out when opening/closing. -fade-exclude = [ ]; # Exclude conditions for fading. - -# Other -backend = "glx" # Backend to use: "xrender" or "glx". GLX backend is typically - # much faster but depends on a sane driver. -mark-wmwin-focused = true; # Try to detect WM windows and mark them as active. -mark-ovredir-focused = true; # Mark all non-WM but override-redirect windows active (e.g. menus). -use-ewmh-active-win = true; # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused - # instead of using FocusIn/Out events. Usually more reliable but - # depends on a EWMH-compliant WM. -detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on. -detect-client-opacity = true; # Detect _NET_WM_OPACITY on client windows, useful for window - # managers not passing _NET_WM_OPACITY of client windows to frame - # windows. -refresh-rate = 0; # For --sw-opti: Specify refresh rate of the screen. 0 for auto. -vsync = "drm"; # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc" - # See man page for more details. -dbe = false; # Enable DBE painting mode. Rarely needed. -paint-on-overlay = true; # Painting on X Composite overlay window. Recommended. -sw-opti = false; # Limit compton to repaint at most once every 1 / refresh_rate. - # Incompatible with certain VSync methods. -unredir-if-possible = false; # Unredirect all windows if a full-screen opaque window is - # detected, to maximize performance for full-screen windows. -focus-exclude = [ ]; # A list of conditions of windows that should always be considered - # focused. -detect-transient = true; # Use WM_TRANSIENT_FOR to group windows, and consider windows in - # the same group focused at the same time. -detect-client-leader = true; # Use WM_CLIENT_LEADER to group windows. -invert-color-include = [ ]; # Conditions for windows to be painted with inverted color. - -# GLX backend # GLX backend fine-tune options. See man page for more info. -glx-no-stencil = true; # Recommended. -glx-copy-from-front = false; # Useful with --glx-swap-method, -# glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync. -# glx-no-rebind-pixmap = true; # Recommended if it works. -glx-no-rebind-pixmap = true; # Recommended if it works. -#glx-swap-method = "4"; # See man page. -glx-swap-method = "4"; # See man page. - -# Window type settings -wintypes: -{ - tooltip = { fade = true; shadow = false; opacity = 1; focus = true; }; - menu = { shadow = false; }; - dropdown_menu = { shadow = false; }; - popup_menu = { shadow = false; }; - utility = { shadow = false; }; - # fade: Fade the particular type of windows. - # shadow: Give those windows shadow - # opacity: Default opacity for the type of windows. - # focus: Whether to always consider windows of this type focused. -}; -#+end_src - -** Dunst -:PROPERTIES: -:header-args+: :tangle ~/.config/dunst/dunstrc -:END: - -#+begin_src conf -[global] -#font = Ubuntu Mono 10.5 -font = Inconsolata 11 - -# Path to default icons. -icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/ - -icon_position = left -# bold -# italic -# strikethrough -# underline -markup = full -# The format of the message. Possible variables are: -# %a appname -# %s summary -# %b body -# %i iconname (including its path) -# %I iconname (without its path) -# %p progress value if set ([ 0%] to [100%]) or nothing -# Markup is allowed -format = "%s\n%b" -# Sort messages by urgency -sort = yes -# Show how many messages are currently hidden (because of geometry) -indicate_hiddenl= no -# Alignment of message text. -# Possible values are "left", "center" and "right" -alignment = center -# The frequency with wich text that is longer than the notification -# window allows bounces back and forth. -# This option conflicts with 'word_wrap'. -# Set to 0 to disable -bounce_freq = 3 -# show age of message if message is older than show_age_threshold seconds. -# set to -1 to disable -show_age_threshold = -1 -# split notifications into multiple lines if they don't fit into geometry -word_wrap = yes -# ignore newlines '\n' in notifications -ignore_newline = no -# The geometry of the message window. -# geometry [{width}]x{height}][+/-{x}+/-{y}] -# The height is measured in number of notifications everything else in pixels. If the width -# is omitted but the height is given ("-geometry x2"), the message window -# expands over the whole screen (dmenu-like). If width is 0, -# the window expands to the longest message displayed. -# A positive x is measured from the left, a negative from the -# right side of the screen. Y is measured from the top and down respectevly. -# The width can be negative. In this case the actual width is the -# screen width minus the width defined in within the geometry option. -#geometry = "410x12-12+12" -#geometry = "0x0-30-30" -geometry = "260x12-30-30" -# The transparency of the window. range: [0; 100] -# This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..) -transparency = 0 -# Don't remove messages, if the user is idle (no mouse or keyboard input) -# for longer than idle_threshold seconds. -# Set to 0 to disable. -idle_threshold = 120 -# Which monitor should the notifications be displayed on. -monitor = 0 -# Display notification on focused monitor. Possible modes are: -# mouse: follow mouse pointer -# keyboard: follow window with keyboard focus -# none: don't follow anything -# -# "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property. -# This should be the case for almost all modern windowmanagers. -# -# If this option is set to mouse or keyboard, the monitor option will be -# ignored. -follow = keyboard -# should a notification popped up from history be sticky or -# timeout as if it would normally do. -sticky_history = yes -# The height of a single line. If the height is smaller than the font height, -# it will get raised to the font height. -# This adds empty space above and under the text. -line_height = 0 - -show_indicators = yes - -# Draw a line of 'separatpr_height' pixel height between two notifications. -# Set to 0 to disable -separator_height = 3 -# padding between text and separator -padding = 8 -# horizontal padding -horizontal_padding = 8 -# Define a color for the separator. -# possible values are: -# * auto: dunst tries to find a color fitting to the background -# * foreground: use the same color as the foreground -# * frame: use the same color as the frame. -# * anything else will be interpreted as a X color -separator_color = foreground -# print a notification on startup -# This is mainly for error detection, since dbus (re-)starts dunst -# automatically after a crash. -startup_notification = false -# dmenu path -#dmenu = /usr/bin/dmenu -p dunst: -dmenu = /usr/bin/rofi -dmenu -p dunst: -# browser for opening urls in context menu -browser = /usr/bin/firefox -new-tab -[frame] -width = 0 -color = "#377222" -[shortcuts] -# shortcuts are specified as [modifier+][modifier+]...key -# available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3' -# and 'mod4' (windows-key) -# xev might be helpful to find names for keys -# close notification -close = ctrl+space -# close all notifications -close_all = ctrl+shift+space -# redisplay last message(s) -# On the US keyboard layout 'grave' is normally above TAB and left of '1'. -history = ctrl+shift+h -# context menu -context = ctrl+shift+period -[urgency_low] -# IMPORTANT: colors have to be defined in quotation marks. -# Otherwise the '#' and following would be interpreted as a comment. -background = "#1d2a30" -foreground = "#71c2af" -timeout = 3 -[urgency_normal] -background = "#1d2a30" -foreground = "#71c2af" -timeout = 0 -[urgency_critical] -background = "#1d2a30" -foreground = "#ff9982" -timeout = 0 - -# Every section that isn't one of the above is interpreted as a rules -# to override settings for certain messages. -# Messages can be matched by 'appname', 'summary', 'body' or 'icon' -# and you can override the 'timeout', 'urgency', 'foreground', 'background' -# and 'format'. -# Shell-like globbing will get expanded. -# -# SCRIPTING -# you can specify a script that gets run when the rule matches by setting -# the 'script' option. -# The script will be called as follows: -# script appname summary body icon urgency -# where urgency can be "LOW", "NORMAL" or "CRITICAL". -# -# NOTE: if you don't want a notification to be displayed, set the format to "" -# NOTE: It might be helpful to run dunst -print in a terminal in order to find -# fitting options for rules. -#[espeak] -# summary = "*" -# script = dunst_espeak.sh -#[script-test] -# summary = "*script*" -# script = dunst_test.sh -#[ignore] -## This notification will not be displayed -# summary = "foobar" -# format = "" -#[signed_on] -# appname = Pidgin -# summary = "*signed on*" -# urgency = low -# -#[signed_off] -# appname = Pidgin -# summary = *signed off* -# urgency = low -# -#[says] -# appname = Pidgin -# summary = *says* -# urgency = critical -# -#[twitter] -# appname = Pidgin -# summary = *twitter.com* -# urgency = normal -# -[xfpm-backlight] - summary = *Brightness* - urgency = low -#+end_src +programs I use besides GNU Emacs. ** Fontconfig :PROPERTIES: @@ -660,102 +53,123 @@ timeout = 0 Helvetica - + Liberation Sans - + #+end_src +** getmail +:PROPERTIES: +:header-args+: :tangle ~/.config/getmail/getmailrc +:END: + +#+begin_src conf +[retriever] +type = SimplePOP3SSLRetriever +server = fencepost.gnu.org +username = bandali +password_command = ("gpg", "--no-tty", "-q", "-d", "/home/bandali/.passwd/gnu.gpg") +port = 995 +use_apop = True + +[destination] +type = Maildir +path = ~/mail/gnu.local/bandali/mail/ + +# [destination] +# type = MDA_external +# path = /usr/lib/dovecot/deliver +# arguments = ('-e', '-f', '%(sender)', '-d', 'bandali@gnu.local') + +[options] +read_all = false +delete_after = 1 +# delete = true +received = false +delivered_to = false +#+end_src + ** Git -*** gitconfig +*** config :PROPERTIES: -:header-args+: :tangle ~/.gitconfig +:header-args+: :tangle ~/.config/git/config :END: -**** user #+begin_src conf [user] - name = Amin Bandali - email = amin@aminb.org - # signingkey = 4E05246AB0BF7FFB -#+end_src + name = Amin Bandali + email = bandali@gnu.org + signingkey = BE6273738E616D6D1B3A08E8A21A020248816103 + +[commit] + gpgsign = true -**** signing -#+begin_src conf -# [commit] -# gpgsign = true # [format] -# signoff = true -#+end_src +# signoff = true -**** core -#+begin_src conf [core] - autocrlf = input # CRLF -> LF on commit - editor = emacsclient -t - excludesfile = ~/.gitignore_global - pager = "less" -#+end_src + autocrlf = input # CRLF -> LF on commit + editor = emacsclient -t + pager = "less" -**** gpg -#+begin_src conf -[gpg] - program = gpg2 -#+end_src +[mailmap] + file = ~/.config/git/mailmap -**** alias -#+begin_src conf [alias] - git = !exec git # handle nested git calls, e.g. git git status - aliases = config --get-regexp '^alias\\.' - a = add - s = status - sl = status --long - c = checkout - cb = checkout -b - b = branch - r = rebase - p = pull - pr = pull --rebase - ps = push - psf = push --force -#+end_src + git = !exec git # handle nested git calls, e.g. git git status + aliases = config --get-regexp '^alias\\.' + a = add + s = status + sl = status --long + c = checkout + cb = checkout -b + b = branch + r = rebase + p = pull + pr = pull --rebase + ps = push + psf = push --force + nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f" + nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f" -**** color -#+begin_src conf [color] - ui = auto + ui = auto [color "status"] - added = green bold - changed = red bold - untracked = red bold + added = green bold + changed = red bold + untracked = red bold [color "branch"] - current = green bold - remote = magenta bold + current = green bold + remote = magenta bold [color "diff"] - new = green bold - old = red bold -#+end_src + new = green bold + old = red bold -**** status -#+begin_src conf -[status] - # showUntrackedFiles = all - short=true - branch=true -#+end_src +# [status] +# # showUntrackedFiles = all +# short=true +# branch=true -**** github -#+begin_src conf [github] - user = aminb + user = notbandali + +[sendemail] + smtpuser = bandali + smtpserver = fencepost.gnu.org + smtpserverport = 587 + smtpencryption = tls + annotate = yes + +[transfer] + fsckObjects = true #+end_src -*** gitignore +*** ignore :PROPERTIES: -:header-args+: :tangle ~/.gitignore_global +:header-args+: :tangle ~/.config/git/ignore :END: #+begin_src conf @@ -766,165 +180,425 @@ timeout = 0 .DS_Store *.elc *-autoloads.el +TAGS #+end_src -** Latexmk +*** mailmap :PROPERTIES: -:header-args+: :tangle ~/.latexmkrc +:header-args+: :tangle ~/.config/git/mailmap :END: #+begin_src conf -$pdf_previewer = "start zathura %O %S"; -$clean_ext = "aux out"; - -# $pdf_update_method = 4; -# $pdf_update_command = "zathura %O %S"; - -# Synctex allows one to jump to from the PDF in Zathura to the source in Emacs -# by Ctrl+click in the PDF. -# Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex -# editor. -# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S'; + + + + + #+end_src -** getmail - -*** getmailrc +** GnuPG :PROPERTIES: -:header-args+: :tangle ~/.getmail/getmailrc +:header-args+: :tangle ~/.gnupg/gpg-agent.conf :END: #+begin_src conf -[retriever] -type = SimplePOP3SSLRetriever -server = fencepost.gnu.org -username = aminb -password_command = ("gpg2", "--no-tty", "-q", "-d", "~/.passwd/gnu.gpg") -port = 995 -use_apop = True +default-cache-ttl 43200 +max-cache-ttl 86400 -[destination] -type = Maildir -path = ~/mail/gnu/Inbox/ +default-cache-ttl-ssh 43200 +max-cache-ttl-ssh 86400 -[options] -delete = True +pinentry-program /home/bandali/.guix-profile/bin/pinentry-emacs +allow-emacs-pinentry +allow-loopback-pinentry #+end_src -*** getmail.service +** GTK + +*** GTK+ 2 :PROPERTIES: -:header-args+: :tangle ~/.config/systemd/user/getmail.service +:header-args+: :tangle ~/.gtkrc-2.0 :END: -#+begin_src conf :tangle no -[Unit] -Description=getmail service - -[Service] -Type=oneshot -ExecStart=/usr/bin/getmail -StandardOutput=syslog -StandardError=syslog +#+begin_src conf +gtk-theme-name="Xfce" +# gtk-icon-theme-name="elementary Xfce darker" +gtk-font-name="Roboto 10" +# gtk-font-name="Source Code Variable 10" +gtk-menu-images=0 +# gtk-key-theme-name = "Emacs" #+end_src -*** getmail.timer +*** GTK+ 3 :PROPERTIES: -:header-args+: :tangle ~/.config/systemd/user/getmail.timer +:header-args+: :tangle ~/.config/gtk-3.0/settings.ini :END: -#+begin_src conf :tangle no -[Unit] -Description=getmail timer +#+begin_src conf +[Settings] +gtk-icon-theme-name = Adwaita +# gtk-theme-name = Adwaita -[Timer] -OnCalendar=*:0/30 -Persistent=true -Unit=getmail.service +gtk-theme-name = Xfce +# gtk-theme-name = Arc-Darker +# gtk-theme-name = Numix-ArchBlue -[Install] -WantedBy=timers.target +gtk-font-name = Roboto 10 +# gtk-font-name = Source Code Variable Medium 10 +# gtk-key-theme-name = Emacs #+end_src -** GnuPG +** Guix + +*** Channels :PROPERTIES: -:header-args+: :tangle ~/.gnupg/gpg-agent.conf +:header-args+: :tangle ~/.config/guix/channels.scm :END: -#+begin_src conf -default-cache-ttl 43200 -max-cache-ttl 43200 +#+begin_src scheme +(list (channel + (name 'guix) ; https://git.savannah.gnu.org/git/guix.git + (url "file:///home/bandali/src/git/guix")) + (channel + (name 'guix-bandali) ; https://git.sr.ht/~bandali/guix-bandali + (url "file:///home/bandali/src/git/guix-bandali"))) +#+end_src + +*** Profile manifests -default-cache-ttl-ssh 10800 -max-cache-ttl-ssh 10800 +To install/update the packages of the default profile, use +#+begin_example +guix package -m $MY_GUIX_MANIFESTS/main.scm +#+end_example +and for other profiles, use +#+begin_example +guix package -m $MY_GUIX_MANIFESTS/name.scm -p $MY_GUIX_PROFILES/name/name +#+end_example +where =name= is the name of the profile (e.g. =doc=, =media=, ...). + +**** doc +:PROPERTIES: +:header-args+: :tangle ~/.config/guix/manifest/doc.scm +:END: -# pinentry-program /usr/bin/pinentry-qt +#+begin_src scheme +(specifications->manifest + '("libreoffice" + "texlive-amsfonts" + "texlive-base" + "texlive-latex-listings" + ;; "texlive-palatino" + "texlive-xcolor" +)) #+end_src -** GTK +**** main +:PROPERTIES: +:header-args+: :tangle ~/.config/guix/manifest/main.scm +:END: -*** gtk-2.0 +#+begin_src scheme +(specifications->manifest + '("alsa-utils" + "bash-completion" + "cpufrequtils" + "cpupower" + "cvs" + "dunst" + "emacs" + "emacs-alert" + "emacs-amx" + "emacs-async" + "emacs-biblio-git" + "emacs-boxquote" + "emacs-company" + "emacs-company-ebdb" + "emacs-crux" + "emacs-dash" + "emacs-debbugs" + "emacs-diff-hl" + "emacs-dmenu" + "emacs-doom-themes" + "emacs-ebdb" + "emacs-emmet-mode" + ;; "emacs-emojify" + "emacs-erc-hl-nicks" + "emacs-erc-scrolltoplace" + "emacs-eshell-up" + "emacs-exec-path-from-shell" + "emacs-expand-region" + "emacs-exwm" + "emacs-exwm-edit" + "emacs-flycheck" + "emacs-geiser" + ;; "emacs-gnus-harvest" + "emacs-guix" + "emacs-helpful" + "emacs-hl-todo" + "emacs-ivy" + "emacs-magit" + "emacs-message-x" + "emacs-minions" + ;; "emacs-multi-term" + "emacs-multiple-cursors" + "emacs-mwim" + ;; "emacs-next" + ;; "emacs-next-delight" + "emacs-no-littering" + "emacs-org" + "emacs-org-contrib" + "emacs-org-ref" + "emacs-orgalist" + "emacs-page-break-lines" + "emacs-pass" + "emacs-pinentry" + "emacs-projectile" + "emacs-shrink-path-git" + "emacs-smart-mode-line" + "emacs-typo" + "emacs-unkillable-scratch" + "emacs-use-package" + "emacs-web-mode" + "emacs-which-key" + "emacs-yasnippet" + "emacs-znc-git" + "font-adobe-source-code-pro" + "font-gnu-freefont-ttf" + "font-google-roboto" + "font-liberation" + "font-linuxlibertine" + "font-sil-gentium" + "font-tex-gyre" + ;; "font-ubuntu" + "font-vazir" + "getmail" + "gettext" + "git" + "git:send-email" + "gnupg" + "guile" + "haunt" + "htop" + "hunspell" + "hunspell-dict-en-ca" + "hunspell-dict-en-us" + "isync" + "light" + "msmtp" + "ncdu" + "notmuch" + "openjdk" + "openssh" + "openssl" + "pass-otp" + "password-store" + "pasystray" + "pinentry-emacs" + "poppler" ; for 'pdffonts' + "rofi" + "rofi-pass" + "rsync" + "rxvt-unicode" + "screen" + "scrot" + "setxkbmap" + "strace" + "thinkfan" + "unzip" + "wget" + "xdg-user-dirs" + ;; "xkbcomp" + "xmodmap" + "xrdb" + "xset" + "xsetroot")) +#+end_src + +**** media :PROPERTIES: -:header-args+: :tangle ~/.gtkrc-2.0 +:header-args+: :tangle ~/.config/guix/manifest/media.scm :END: -#+begin_src conf -gtk-theme-name="Greybird" -gtk-icon-theme-name="Paper" -gtk-font-name="Ubuntu 10" -gtk-menu-images=0 -# gtk-key-theme-name = "Emacs" +#+begin_src scheme +(specifications->manifest + '("audacity" + "gimp" + "inkscape" + "mpv" + "youtube-dl")) #+end_src -*** gtk-3.0 +**** web :PROPERTIES: -:header-args+: :tangle ~/.config/gtk-3.0/settings.ini +:header-args+: :tangle ~/.config/guix/manifest/web.scm :END: -#+begin_src conf :tangle no -[Settings] -gtk-icon-theme-name = Paper -# gtk-theme-name = Adwaita +#+begin_src scheme +(specifications->manifest + '("icecat" + "rtv")) +#+end_src -gtk-theme-name = Greybird -# gtk-theme-name = Arc-Darker -# gtk-theme-name = Numix-ArchBlue +*** Systems -gtk-font-name = Ubuntu 10 -# gtk-key-theme-name = Emacs +**** chaman +:PROPERTIES: +:header-args+: :tangle ~/.config/guix/system/chaman.scm +:END: + +#+begin_src scheme +(use-modules (gnu) + (gnu packages certs) ; for nss-certs + (gnu packages emacs-xyz) ; for exwm + (gnu packages linux)) ; for powertop +(use-service-modules admin desktop mail networking pm ssh xorg) + +(operating-system + (host-name "chaman") + (locale "en_CA.utf8") + (timezone "Canada/Eastern") + (keyboard-layout + (keyboard-layout "us" "basic")) + (bootloader + (bootloader-configuration + (bootloader grub-bootloader) + (target "/dev/sda") + (keyboard-layout keyboard-layout))) + (mapped-devices + (list (mapped-device + (source + (uuid "283da85e-2c84-47e6-a8ca-20f4e8efb806")) + (target "groot") + (type luks-device-mapping)) + (mapped-device + (source + (uuid "017ddebc-c2c3-4a0a-bda4-d47ec0bc67f0")) + (target "data") + (type luks-device-mapping)))) + (file-systems + (cons* (file-system + (mount-point "/") + (device "/dev/mapper/groot") + (type "ext4") + (dependencies mapped-devices)) + (file-system + (mount-point "/data") + (device "/dev/mapper/data") + (type "ext4") + (dependencies mapped-devices)) + %base-file-systems)) + (users + (cons* (user-account + (name "bandali") + (group "users") + (home-directory "/home/bandali") + (supplementary-groups + '("wheel" "netdev" "audio" "video"))) + %base-user-accounts)) + (packages + (cons* nss-certs + emacs-exwm + %base-packages)) + (services + (cons* + (service xfce-desktop-service-type) + (set-xorg-configuration + (xorg-configuration + (keyboard-layout keyboard-layout))) + (dovecot-service + #:config + (dovecot-configuration + ;; (log-path "/dev/stderr") + (protocols (list (protocol-configuration + (name "imap")))) + (ssl? "no") + (listen '("127.0.0.1")) + (disable-plaintext-auth? #f) + (auth-mechanisms '("plain")) + (postmaster-address "bandali@gnu.local") + (mail-location "maildir:/home/bandali/mail/%d/%n/mail") + (userdbs (list (userdb-configuration + (driver "static") + (args (list "uid=bandali" "gid=users" "home=/home/bandali/mail/%d/%n"))))) + (passdbs (list (passdb-configuration + (driver "passwd-file") + (args (list "/data/dovecot-passwd"))))))) + (service rottlog-service-type) + (service thermald-service-type) + (service tlp-service-type + (tlp-configuration + (cpu-boost-on-ac? #t) + (sound-power-save-on-bat 0) + (sound-power-save-controller? #f) + ;; (usb-blacklist "0e8f:00a8") ;for some reason doesn't seem to work + (usb-autosuspend? #f))) + (simple-service 'my-powertop-auto-tune activation-service-type + #~(zero? (system* #$(file-append powertop "/sbin/powertop") + "--auto-tune"))) + (simple-service 'light-udev-rules udev-service-type (list light)) + %desktop-services))) #+end_src ** isync - -*** mbsyncrc :PROPERTIES: -:header-args+: :tangle ~/.mbsyncrc +:header-args+: :tangle ~/.config/isync/mbsyncrc :END: #+begin_src conf # Global defaults CopyArrivalDate yes +Create Both +Expunge Both ###### -IMAPAccount amin -Host nix.aminb.org -User amin@aminb.org -PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg" +IMAPAccount shemshak +Host mail.shemshak.org +User bandali@shemshak.org +PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/shemshak.gpg" SSLType IMAPS -IMAPStore amin-remote -Account amin +IMAPStore shemshak-remote +Account shemshak -MaildirStore amin-local -Path ~/mail/amin/ -Inbox ~/mail/amin/Inbox -SubFolders Verbatim +IMAPAccount shemshak-local +Host 127.0.0.1 +Port 143 +User bandali@shemshak.local +PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/shemshak-local.gpg" +SSLType None -Channel amin -Master :amin-remote: -Slave :amin-local: -Patterns * !dovecot* -Create Both -SyncState * +IMAPStore shemshak-local +Account shemshak-local + +Channel shemshak +Master :shemshak-remote: +Slave :shemshak-local: +Patterns * + +###### +IMAPAccount gnub +Host mail.shemshak.org +User gnu@bndl.org +PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/gnub.gpg" +SSLType IMAPS + +IMAPStore gnub-remote +Account gnub + +IMAPAccount gnub-local +Host 127.0.0.1 +Port 143 +User bandali@gnu.local +PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/gnub-local.gpg" +SSLType None + +IMAPStore gnub-local +Account gnub-local + +Channel gnub +Master :gnub-remote: +Slave :gnub-local: +Patterns * ###### IMAPAccount uwaterloo @@ -936,51 +610,64 @@ SSLType IMAPS IMAPStore uwaterloo-remote Account uwaterloo -MaildirStore uwaterloo-local -Path ~/mail/uwaterloo/ -Inbox ~/mail/uwaterloo/Inbox -SubFolders Verbatim +IMAPAccount uwaterloo-local +Host 127.0.0.1 +Port 143 +User abandali@uwaterloo.local +PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo-local.gpg" +SSLType None + +IMAPStore uwaterloo-local +Account uwaterloo-local Channel uwaterloo Master :uwaterloo-remote: Slave :uwaterloo-local: -Patterns * !dovecot* -Create Both -SyncState * -#+end_src +Patterns * -*** mbsync.service -:PROPERTIES: -:header-args+: :tangle ~/.config/systemd/user/mbsync.service -:END: +###### +IMAPAccount csclub +Host mail.csclub.uwaterloo.ca +User abandali +PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/csclub.gpg" +SSLType IMAPS -#+begin_src conf :tangle no -[Unit] -Description=mbsync service +IMAPStore csclub-remote +Account csclub -[Service] -Type=oneshot -ExecStart=/usr/bin/mbsync -Va -StandardOutput=syslog -StandardError=syslog +IMAPAccount csclub-local +Host 127.0.0.1 +Port 143 +User abandali@csclub.uwaterloo.local +PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/csclub-local.gpg" +SSLType None + +IMAPStore csclub-local +Account csclub-local + +Channel csclub +Master :csclub-remote: +Slave :csclub-local: +Patterns * #+end_src -*** mbsync.timer +** Latexmk :PROPERTIES: -:header-args+: :tangle ~/.config/systemd/user/mbsync.timer +:header-args+: :tangle ~/.config/latexmk/latexmkrc :END: -#+begin_src conf :tangle no -[Unit] -Description=mbsync timer +#+begin_src conf +$pdf_previewer = "start zathura %O %S"; +$clean_ext = "aux out"; -[Timer] -OnCalendar=*:0/15 -Persistent=true -Unit=mbsync.service +# $pdf_update_method = 4; +# $pdf_update_command = "zathura %O %S"; -[Install] -WantedBy=timers.target +# Synctex allows one to jump to from the PDF in Zathura to the source in Emacs +# by Ctrl+click in the PDF. +# Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex +# editor. +# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S'; #+end_src ** mpd @@ -1400,7 +1087,7 @@ audio_output { ** msmtp :PROPERTIES: -:header-args+: :tangle ~/.msmtprc +:header-args+: :tangle ~/.config/msmtp/config :END: #+begin_src conf @@ -1412,767 +1099,1533 @@ auth on #tls_trust_file /etc/ssl/certs/ca-certificates.crt logfile ~/.msmtp.log -# aminb -account aminb -host nix.aminb.org -tls_fingerprint BB:98:B3:02:83:B0:E0:C3:49:3E:C2:B2:A8:60:62:78:03:B3:5D:B3:BD:B8:0A:39:BB:E4:B0:66:D1:CF:D1:6B +account shemshak +host mail.shemshak.org +# use `msmtp -a shemshak --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint +tls_fingerprint A9:B8:79:CE:47:F7:E8:EB:7B:0D:C5:3E:1E:35:72:A0:03:E3:A2:1A:A9:1C:24:34:6E:F9:9E:78:89:67:11:E3 tls_starttls on +from amin@shemshak.org +user bandali@shemshak.org +passwordeval gpg --no-tty -q -d ~/.passwd/shemshak.gpg + +account bandali : shemshak +from bandali@shemshak.org +account aminb : shemshak from amin@aminb.org -user amin@aminb.org -passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg +account bndl : shemshak +from a@bndl.org -# gnu account gnu host fencepost.gnu.org -tls_fingerprint 94:0E:37:EB:EA:44:5A:4B:B6:6F:16:3D:6C:7E:7E:44:2D:93:61:C1:FE:82:A8:29:5E:3C:12:4E:2D:BE:0E:2C +# use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint +tls_fingerprint 36:A7:33:D0:57:25:BB:D8:A8:21:7B:A3:91:05:A9:4F:43:4E:87:AE:65:4B:0D:A4:A0:9A:08:89:AE:1F:A5:D7 tls_starttls on +from bandali@gnu.org +user bandali +passwordeval gpg --no-tty -q -d ~/.passwd/gnu.gpg + +account gnu-mab : gnu +from mab@gnu.org +account gnu-aminb : gnu from aminb@gnu.org -user aminb -passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg +account gnu-amin : gnu +from amin@gnu.org -# uwaterloo account uwaterloo host connect.uwaterloo.ca tls_starttls on from abandali@uwaterloo.ca user abandali -passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg +passwordeval gpg --no-tty -q -d ~/.passwd/uwaterloo.gpg tls_trust_file /etc/ssl/certs/ca-certificates.crt -# uwaterloo (friendly address) account uwaterloo-friendly : uwaterloo -from amin.bandali@uwaterloo.ca +from bandali@uwaterloo.ca + +account csclub +host mail.csclub.uwaterloo.ca +tls_starttls on +from abandali@csclub.uwaterloo.ca +user abandali +passwordeval gpg --no-tty -q -d ~/.passwd/csclub.gpg +tls_trust_file /etc/ssl/certs/ca-certificates.crt + +account csclub-friendly : csclub +from bandali@csclub.uwaterloo.ca + +account sfl +host mail.savoirfairelinux.com +tls on +from amin.bandali@savoirfairelinux.com +user amin.bandali +passwordeval gpg --no-tty -q -d ~/.passwd/sfl.gpg +tls_trust_file /etc/ssl/certs/ca-certificates.crt # Set a default account -account default : aminb +account default : shemshak #+end_src -** ncmpcpp +** Readline +:PROPERTIES: +:header-args+: :tangle ~/.config/readline/inputrc +:END: + +#+begin_src conf +set enable-bracketed-paste on + +set colored-stats on +set colored-completion-prefix on +set completion-ignore-case on +set menu-complete-display-prefix on +set page-completions off +set show-all-if-ambiguous on +set show-all-if-unmodified on +set visible-stats on + +TAB: menu-complete +"\e[Z": menu-complete-backward + +"\e[A": history-search-backward +"\e[B": history-search-forward +#+end_src -*** config +** rofi :PROPERTIES: -:header-args+: :tangle ~/.ncmpcpp/config +:header-args+: :tangle ~/.config/rofi/config :END: -#+begin_src conf :tangle no -############################################################## -## This is the example configuration file. Copy it to ## -## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ## -## and set up your preferences. ## -############################################################## -# -##### directories ###### -## -## Directory for storing ncmpcpp related files. -## Changing it is useful if you want to store -## everything somewhere else and provide command -## line setting for alternative location to config -## file which defines that while launching ncmpcpp. -## -# -ncmpcpp_directory = ~/.ncmpcpp -# -## -## Directory for storing downloaded lyrics. It -## defaults to ~/.lyrics since other MPD clients -## (eg. ncmpc) also use that location. -## -# -#lyrics_directory = ~/.lyrics -# -##### connection settings ##### -# -#mpd_host = localhost -# -#mpd_port = 6600 -# -#mpd_connection_timeout = 5 -# -## Needed for tag editor and file operations to work. -## -mpd_music_dir = ~/usr/music -# -#mpd_crossfade_time = 5 -# -##### music visualizer ##### -## -## Note: In order to make music visualizer work you'll -## need to use mpd fifo output, whose format parameter -## has to be set to 44100:16:1 for mono visualization -## or 44100:16:2 for stereo visualization. Example -## configuration (it has to be put into mpd.conf): -## -## audio_output { -## type "fifo" -## name "Visualizer feed" -## path "/tmp/mpd.fifo" -## format "44100:16:2" -## } -## -# -visualizer_fifo_path = /tmp/mpd.fifo -# -## -## Note: Below parameter is needed for ncmpcpp -## to determine which output provides data for -## visualizer and thus allow syncing between -## visualization and sound as currently there -## are some problems with it. -## -# -visualizer_output_name = my fifo -# -## -## If you set format to 44100:16:2, make it 'yes'. -## -visualizer_in_stereo = yes -# -## -## Multiply received samples by given value. Very -## useful for proper visualization of quiet music. -## -#visualizer_sample_multiplier = 1 -# -## -## Note: Below parameter defines how often ncmpcpp -## has to "synchronize" visualizer and audio outputs. -## 30 seconds is optimal value, but if you experience -## synchronization problems, set it to lower value. -## Keep in mind that sane values start with >=10. -## -# -visualizer_sync_interval = 30 -# -## -## Note: To enable spectrum frequency visualization -## you need to compile ncmpcpp with fftw3 support. -## -# -## Available values: spectrum, wave, wave_filled, ellipse. -## -visualizer_type = spectrum -# -#visualizer_look = ●▮ -visualizer_look = "●•" -# -#visualizer_color = blue, cyan, green, yellow, magenta, red -# -## Alternative subset of 256 colors for terminals that support it. -## -#visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161 -# -##### system encoding ##### -## -## ncmpcpp should detect your charset encoding -## but if it failed to do so, you can specify -## charset encoding you are using here. -## -## Note: You can see whether your ncmpcpp build -## supports charset detection by checking output -## of `ncmpcpp --version`. -## -## Note: Since MPD uses UTF-8 by default, setting -## this option makes sense only if your encoding -## is different. -## -# -#system_encoding = "" -# -##### delays ##### -# -## Time of inactivity (in seconds) after playlist -## highlighting will be disabled (0 = always on). -## -#playlist_disable_highlight_delay = 5 -# -## Defines how long messages are supposed to be visible. -## -#message_delay_time = 5 -# -##### song format ##### -## -## For a song format you can use: -## -## %l - length -## %f - filename -## %D - directory -## %a - artist -## %A - album artist -## %t - title -## %b - album -## %y - date -## %n - track number (01/12 -> 01) -## %N - full track info (01/12 -> 01/12) -## %g - genre -## %c - composer -## %p - performer -## %d - disc -## %C - comment -## %P - priority -## $R - begin right alignment -## -## If you want to make sure that a part of the format is displayed -## only when certain tags are present, you can archieve it by -## grouping them with brackets, e.g. '{%a - %t}' will be evaluated -## to 'ARTIST - TITLE' if both tags are present or '' otherwise. -## It is also possible to define a list of alternatives by providing -## several groups and separating them with '|', e.g. '{%t}|{%f}' -## will be evaluated to 'TITLE' or 'FILENAME' if the former is not -## present. -## -## Note: If you want to set limit on maximal length of a tag, just -## put the appropriate number between % and character that defines -## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'. -## -## In addition, formats support markers used for text attributes. -## They are followed by character '$'. After that you can put: -## -## - 0 - default window color (discards all other colors) -## - 1 - black -## - 2 - red -## - 3 - green -## - 4 - yellow -## - 5 - blue -## - 6 - magenta -## - 7 - cyan -## - 8 - white -## - 9 - end of current color -## - b - bold text -## - u - underline text -## - r - reverse colors -## - a - use alternative character set -## -## If you don't want to use a non-color attribute anymore, just put it -## again, but this time insert character '/' between '$' and attribute -## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag -## or filename with reversed colors. -## -## If you want to use 256 colors and/or background colors in formats -## (the naming scheme is described below in section about color -## definitions), it can be done with the syntax $(COLOR), e.g. to set -## the artist tag to one of the non-standard colors and make it have -## yellow background, you need to write $(197_yellow)%a$(end). Note -## that for standard colors this is interchangable with attributes -## listed above. -## -## Note: colors can be nested. -## -# -#song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9} -# -#song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f} -# -#song_library_format = {%n - }{%t}|{%f} -# -# -#alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b -# -#alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D} -# -#now_playing_prefix = $b -# -#now_playing_suffix = $/b -# -#browser_playlist_prefix = "$2playlist$9 " -# -#selected_item_prefix = $6 -# -#selected_item_suffix = $9 -# -#modified_item_prefix = $3> $9 -# -## -## Note: attributes are not supported for the following variables. -## -#song_window_title_format = {%a - }{%t}|{%f} -## -## Note: Below variables are used for sorting songs in browser. -## The sort mode determines how songs are sorted, and can be used -## in combination with a sort format to specify a custom sorting format. -## Available values for browser_sort_mode are "name", "mtime", "format" -## and "noop". -## -# -#browser_sort_mode = name -# -#browser_sort_format = {%a - }{%t}|{%f} {(%l)} -# -##### columns settings ##### -## -## syntax of song columns list format is "column column etc." -## -## - syntax for each column is: -## -## (width of the column)[color of the column]{displayed tag} -## -## Note: Width is by default in %, if you want a column to -## have fixed size, add 'f' after the value, e.g. (10)[white]{a} -## will be the column that take 10% of screen (so the real width -## will depend on actual screen size), whereas (10f)[white]{a} -## will take 10 terminal cells, no matter how wide the screen is. -## -## - color is optional (if you want the default one, -## leave the field empty). -## -## Note: You can give a column additional attributes by putting appropriate -## character after displayed tag character. Available attributes are: -## -## - r - column will be right aligned -## - E - if tag is empty, empty tag marker won't be displayed -## -## You can also: -## -## - give a column custom name by putting it after attributes, -## separated with character ':', e.g. {lr:Length} gives you -## right aligned column of lengths named "Length". -## -## - define sequence of tags, that have to be displayed in case -## predecessor is empty in a way similar to the one in classic -## song format, i.e. using '|' character, e.g. {a|c|p:Owner} -## creates column named "Owner" that tries to display artist -## tag and then composer and performer if previous ones are -## not available. -## -# -#song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l} -# -##### various settings ##### -# -## -## Note: Custom command that will be executed each -## time song changes. Useful for notifications etc. -## -#execute_on_song_change = "" -# -#playlist_show_mpd_host = no -# -#playlist_show_remaining_time = no -# -#playlist_shorten_total_times = no -# -#playlist_separate_albums = no -# -## -## Note: Possible display modes: classic, columns. -## -#playlist_display_mode = columns -# -#browser_display_mode = classic -# -#search_engine_display_mode = classic -# -#playlist_editor_display_mode = classic -# -#discard_colors_if_item_is_selected = yes -# -#incremental_seeking = yes -# -#seek_time = 1 -# -#volume_change_step = 2 -# -#autocenter_mode = no -# -#centered_cursor = no -# -## -## Note: You can specify third character which will -## be used to build 'empty' part of progressbar. -## -#progressbar_look = => -progressbar_look = "─╼╶" -#progressbar_look = "─⊙╶" -# -#progressbar_boldness = yes -# -## Available values: database, playlist. -## -#default_place_to_search_in = database -# -## Available values: classic, alternative. -## -#user_interface = classic -# -#data_fetching_delay = yes -# -## Available values: artist, album_artist, date, genre, composer, performer. -## -#media_library_primary_tag = artist -# -## Available values: wrapped, normal. -## -#default_find_mode = wrapped -# -#default_tag_editor_pattern = %n - %t -# -#header_visibility = yes -# -#statusbar_visibility = yes -# -#titles_visibility = yes -# -#header_text_scrolling = yes -# -#cyclic_scrolling = no -# -#lines_scrolled = 2 -# -#follow_now_playing_lyrics = no -# -#fetch_lyrics_for_current_song_in_background = no -# -#store_lyrics_in_song_dir = no -# -#generate_win32_compatible_filenames = yes -# -#allow_for_physical_item_deletion = no -# -## -## Note: If you set this variable, ncmpcpp will try to -## get info from last.fm in language you set and if it -## fails, it will fall back to english. Otherwise it will -## use english the first time. -## -## Note: Language has to be expressed as an ISO 639 alpha-2 code. -## -#lastfm_preferred_language = en -# -#show_hidden_files_in_local_browser = no -# -## -## How shall screen switcher work? -## -## - "previous" - switch between the current and previous screen. -## - "screen1,...,screenN" - switch between given sequence of screens. -## -## Screens available for use: help, playlist, browser, search_engine, -## media_library, playlist_editor, tag_editor, outputs, visualizer, clock. -## -#screen_switcher_mode = playlist, browser -# -## -## Note: You can define startup screen -## by choosing screen from the list above. -## -#startup_screen = playlist -# -## -## Note: You can define startup slave screen -## by choosing screen from the list above or -## an empty value for no slave screen. -## -#startup_slave_screen = "" -# -#startup_slave_screen_focus = no -# -## -## Default width of locked screen (in %). -## Acceptable values are from 20 to 80. -## -# -#locked_screen_width_part = 50 -# -#ask_for_locked_screen_width_part = yes -# -#jump_to_now_playing_song_at_start = yes -# -#ask_before_clearing_playlists = yes -# -#clock_display_seconds = no -# -#display_volume_level = yes -# -#display_bitrate = no -# -#display_remaining_time = no -# -## Available values: none, basic, extended, perl. -## -#regular_expressions = perl -# -## -## Note: If below is enabled, ncmpcpp will ignore leading -## "The" word while sorting items in browser, tags in -## media library, etc. -## -#ignore_leading_the = no -# -#block_search_constraints_change_if_items_found = yes -# -#mouse_support = yes -# -#mouse_list_scroll_whole_page = yes -# -#empty_tag_marker = -# -#tags_separator = " | " -# -#tag_editor_extended_numeration = no -# -#media_library_sort_by_mtime = no -# -#enable_window_title = yes -# -## -## Note: You can choose default search mode for search -## engine. Available modes are: -## -## - 1 - use mpd built-in searching (no regexes, pattern matching) -## - 2 - use ncmpcpp searching (pattern matching with support for regexes, -## but if your mpd is on a remote machine, downloading big database -## to process it can take a while -## - 3 - match only exact values (this mode uses mpd function for searching -## in database and local one for searching in current playlist) -## -# -#search_engine_default_search_mode = 1 -# -#external_editor = nano -# -## Note: set to yes if external editor is a console application. -## -#use_console_editor = yes -# -##### colors definitions ##### -## -## It is possible to set a background color by setting a color -## value "_", e.g. red_black will set -## foregound color to red and background color to black. -## -## In addition, for terminals that support 256 colors it -## is possible to set one of them by using a number in range -## [1, 256] instead of color name, e.g. numerical value -## corresponding to red_black is 2_1. To find out if the -## terminal supports 256 colors, run ncmpcpp and check out -## the bottom of the help screen for list of available colors -## and their numerical values. -## -## Note: due to technical limitations of ncurses, if 256 colors -## are used, it is possible to either use only the colors with -## default background color, or all pairs from 1_1 up to 254_127, -## depending on the ncurses version used. -## -# -#colors_enabled = yes -# -#empty_tag_color = cyan -# -#header_window_color = default -# -#volume_color = default -# -#state_line_color = default -# -#state_flags_color = default -# -#main_window_color = yellow -# -#color1 = white -# -#color2 = green -# -#main_window_highlight_color = yellow -# -#progressbar_color = black -# -#progressbar_elapsed_color = green -# -#statusbar_color = default -# -#alternative_ui_separator_color = black -# -#active_column_color = red -# -#window_border_color = green -# -#active_window_border = red -# +#+begin_src conf +! rofi.font: Ubuntu Mono 13 +! rofi.font: Inconsolata 16 +! rofi.font: Iosevka 13 +! rofi.font: Source Code Pro 11 +rofi.font: Source Code Pro 10.5 +rofi.modi: run,window +! rofi.width: 640 +rofi.width: 600 +!rofi.location: 2 +!rofi.yoffset: 200 +rofi.monitor: -1 +!rofi.lines: 10 + +rofi.theme: ~/.guix-profile/share/rofi/themes/gruvbox-light-hard.rasi #+end_src -*** bindings +** rofi-pass :PROPERTIES: -:header-args+: :tangle ~/.ncmpcpp/bindings +:header-args+: :tangle ~/.config/rofi-pass/config :END: -#+begin_src conf :tangle no -def_key "j" - scroll_down -def_key "k" - scroll_up - -def_key "ctrl-u" - page_up -def_key "ctrl-d" - page_down - -def_key "h" - previous_column -def_key "l" - next_column - -def_key "." - show_lyrics - -def_key "n" - next_found_item -def_key "N" - previous_found_item - -def_key "J" - move_sort_order_down -def_key "K" - move_sort_order_up -#+end_src +#+begin_src conf +# permanently set alternative root dir +# root=/path/to/root -* Scripts +# rofi command. Make sure to have "$@" as last argument +_rofi () { + #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@" + rofi -i -no-auto-select -kb-accept-entry "!Return" "$@" +} -This section contains various useful scripts and the ones used by the -programs above. For instance, =toggle-tablet= for switching to and -from tablet mode on my X220T, =toggle-presentation-mode= for toggling -Xfce's presentation mode which keeps the screen awake, and -=rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an -exact brightness value. +# xdotool needs the keyboard layout to be set using setxkbmap +# You can do this in your autostart scripts (e.g. xinitrc) -** rofi-light +# If for some reason, you cannot do this, you can set the command here. +# and set fix_layout to true +fix_layout=false + +layout_cmd () { + setxkbmap us +} + +# fields to be used +URL_field='url' +USERNAME_field='user' +AUTOTYPE_field='autotype' + +# delay to be used for :delay keyword +delay=2 + +## Programs to be used +# Editor +EDITOR='gvim -f' + +# Browser +BROWSER='chromium' + +## Misc settings + +default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl +auto_enter='false' +notify='false' +default_autotype='user :tab pass' + +# color of the help messages +# leave empty for autodetection +help_color="#4872FF" + +# Clipboard settings +# Possible options: primary, clipboard, both +clip=primary + +# Options for generating new password entries +# default_user is also used for password files that have no user field. +default_user=aminb +default_user2=bandali +password_length=30 + +# Custom Keybindings +#autotype="Alt+1" +autotype="Alt+m" +type_user="Alt+2" +type_pass="Alt+3" +open_url="Alt+4" +copy_name="Alt+u" +copy_url="Alt+l" +copy_pass="Alt+p" +show="Alt+o" +copy_entry="Alt+2" +type_entry="Alt+1" +copy_menu="Alt+c" +action_menu="Alt+a" +type_menu="Alt+t" +help="Alt+h" +switch="Alt+x" +insert_pass="Alt+n" +#+end_src + +** Screen :PROPERTIES: -:header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash" +:header-args+: :tangle ~/.config/screen/screenrc :END: -#+begin_src bash -cur=$(light -G) -val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 8) -light -S $val +#+begin_src screen +startup_message off +caption always "%{= kc}GNU Screen $USER@%H (load: %l)%-28=%{= .m}%D %d.%m.%Y %0c" #+end_src -** toggle-layout +** Shell + +*** GNU Bash :PROPERTIES: -:header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash" +:header-args+: :tangle ~/.bashrc :END: #+begin_src bash -lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)" +# Bash initialization for interactive non-login shells and +# for remote shells (info "(bash) Bash Startup Files"). + +# Export 'SHELL' to child processes. Programs such as 'screen' +# honor it and otherwise use /bin/sh. +export SHELL + +if [[ $- != *i* ]] +then + # We are being invoked from a non-interactive shell. If this + # is an SSH session (as in "ssh host command"), source + # /etc/profile so we get PATH and other essential variables. + [[ -n "$SSH_CLIENT" ]] && source /etc/profile + + # Don't do anything else. + return +fi -if [ "$lang" = "us" ]; then - setxkbmap ir +if [ -n "$IS_GUIX_SYSTEM" ]; then + # Source the system-wide file. + source /etc/bashrc +fi + +# from https://unix.stackexchange.com/a/55935 +b_prompt() { + cwd=$(sed -e "s:$HOME:~:" -e "s:\(\.\?[^/]\)[^/]*/:\1/:g" <<<$PWD) + printf $cwd +} + +if [ $(id -u) == "0" ]; then + PS1='`printf "\[\e[1;31m\]\$\[\e[00m\]"` ' else - setxkbmap us - # xmodmap $HOME/.Xmodmap + PS1='\$ ' +fi +PS1="\u@\h:\w/`[ -n "$GUIX_ENVIRONMENT" ] && printf \" [env]\"`\n$PS1" + +# set terminal title +PROMPT_COMMAND='echo -ne "\033]0;${USER}@${HOSTNAME}: $(b_prompt)\007"' + +# i-beam cursor +# echo -e "\033[5 q" # blinking +echo -e "\033[6 q" # non-blinking + +# various bash tweaks +# append to the history file, don't overwrite it +shopt -s histappend +shopt -s cmdhist +# check the window size after each command and, if necessary, +# update the values of LINES and COLUMNS. +shopt -s checkwinsize +# If set, the pattern "**" used in a pathname expansion context will +# match all files and zero or more directories and subdirectories. +#shopt -s globstar +# for setting history length see HISTSIZE and HISTFILESIZE in bash(1) +HISTSIZE= +HISTFILESIZE= +# don't put duplicate lines or lines starting with space in the +# history. +HISTCONTROL=ignoreboth +# ignore a few very common commands and don't add them to history +HISTIGNORE='ls:l:s:g:[bf]g:history' +HISTTIMEFORMAT='%F %T ' +stty stop "" + +# aliases +alias ls='ls -p --color=auto' +alias l='ls -lh' # long format and human-readable sizes +alias ll='l -A' # long format, all files +alias dir='dir --color=auto' +alias vdir='vdir --color=auto' +alias grep='grep --color=auto' +alias fgrep='fgrep --color=auto' +alias egrep='egrep --color=auto' +alias mpv="mpv --ytdl-format mp4" +alias mv="mv -iv" +alias cp="cp -iv" +alias mbsync='mbsync -c "$XDG_CONFIG_HOME"/isync/mbsyncrc' +alias getmail='getmail --getmaildir "$XDG_CONFIG_HOME"/getmail --rcfile getmailrc' +alias m="mbsync csclub; mbsync uwaterloo; mbsync shemshak; mbsync gnub" +alias best="youtube-dl -f best" +alias e="$EDITOR" +alias se="SUDO_EDITOR=\"emacsclient\" sudo -e" + +aur() { + cd ~/usr/builds + [ -d ${1} ] || git clone https://aur.archlinux.org/${1}.git + cd ${1} +} + +function t { + cd $(mktemp -d /tmp/$1.XXXX) +} + +# separate alias definitions file, if exists +if [ -f ~/.bash_aliases ]; then + . ~/.bash_aliases fi + +# enable programmable completion features (not needed if already +# enabled in /etc/bash.bashrc and if /etc/profile sources +# /etc/bash.bashrc). +if ! shopt -oq posix; then + if [ -f /usr/share/bash-completion/bash_completion ]; then + . /usr/share/bash-completion/bash_completion + elif [ -f /etc/bash_completion ]; then + . /etc/bash_completion + fi +fi + +# source Guix shell config dirs, for vte.sh and bash completions +GUIX_PROFILES=("${HOME}/.guix-profile" + "${HOME}/.config/guix/current") +for profile in "${GUIX_PROFILES[@]}"; do + for dir in "${profile}/etc/bash_completion.d" "${profile}/etc/profile.d"; do + if [ -d "${dir}" ]; then + for f in "${dir}"/*; do + . $f + done + fi + done +done #+end_src -** toggle-presentation-mode +*** profile :PROPERTIES: -:header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash" +:header-args+: :tangle ~/.profile :END: -#+begin_src bash -xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T +#+begin_src sh +# ~/.profile: executed by the command interpreter for login shells. +# This file is not read by bash(1), if ~/.bash_profile or ~/.bash_login +# exists. + +# source host-specific profile +if [ -f "$HOME/.config/profiles/$(hostname)" ]; then + . "$HOME/.config/profiles/$(hostname)" +fi + +export EDITOR="emacsclient -nw" +export VISUAL="emcl" + +PATH="$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH" +if [ -z "$IS_GUIX_SYSTEM" ]; then + PATH="$HOME/.config/guix/current/bin${PATH:+:}$PATH" + INFOPATH="$HOME/.config/guix/current/share/info${INFOPATH:+:}$INFOPATH" + export GUIX_LOCPATH="$HOME/.guix-profile/lib/locale" +fi +export PATH +export INFOPATH + +export MY_GUIX_MANIFESTS="$HOME/.config/guix/manifest" +export MY_GUIX_PROFILES="$HOME/.config/guix/profile" + +export XDG_CONFIG_HOME="$HOME/.config" +export XDG_DATA_HOME="$HOME/.local/share" + +if [ -f "$HOME/.config/user-dirs.dirs" ]; then + set -a + . "$HOME/.config/user-dirs.dirs" + set +a +fi + +export INPUTRC="$XDG_CONFIG_HOME"/readline/inputrc +export SCREENRC="$XDG_CONFIG_HOME"/screen/screenrc + +export MAILDIR="$HOME/mail" +export CVS_RSH="ssh" + +if [ -x "$(command -v go)" ]; then + export GOPATH="$HOME/src/go" + export PATH="$GOPATH/bin:$PATH" +fi + +# if running bash +if [ -n "$BASH_VERSION" ]; then + # include .bashrc if it exists + if [ -f "$HOME/.bashrc" ]; then + . "$HOME/.bashrc" + fi +fi + +if [ -z "$IS_GUIX_SYSTEM" ]; then + # if guix is installed + if [ -x "$(command -v guix)" ]; then + SSL_CERT_DIR="$HOME/.guix-profile/etc/ssl/certs" + if [ -d "$SSL_CERT_DIR" -o -h "$SSL_CERT_DIR" ]; then + export SSL_CERT_DIR + export SSL_CERT_FILE="$HOME/.guix-profile/etc/ssl/certs/ca-certificates.crt" + else + printf "it seems you forgot to \`guix install nss-certs\'\n" + fi + GUIX_PROFILE="$HOME/.guix-profile" + . "$GUIX_PROFILE/etc/profile" + unset XDG_DATA_DIRS + fi +fi + +for p in $MY_GUIX_PROFILES/*; do + profile=$p/$(basename "$p") + if [ -f "$profile"/etc/profile ]; then + GUIX_PROFILE="$profile" + . "$GUIX_PROFILE"/etc/profile + fi + unset profile +done + +export PATH="$HOME/usr/local/bin:$HOME/.local/bin:$PATH" + +# start an ssh-agent (with guix's openssh) +if [ -z "$IS_GUIX_SYSTEM" ]; then + if ! pgrep -u "$USER" ssh-agent > /dev/null; then + ssh-agent > ~/.ssh-agent-thing + fi + if [[ ! "$SSH_AUTH_SOCK" ]]; then + eval "$(<~/.ssh-agent-thing)" + fi +fi + +# footenote: when on a foreign distro and using Xfce, don't forget to +# disable its auto-start of gpg- and ssh-agent, by issuing +# xfconf-query -c xfce4-session -p /startup/ssh-agent/enabled -n -t bool -s false +# xfconf-query -c xfce4-session -p /startup/gpg-agent/enabled -n -t bool -s false +# see https://docs.xfce.org/xfce/xfce4-session/advanced#ssh_and_gpg_agents +# also, MATE does something similar with gnome-keyring-daemon: +# http://william.shallum.net/random-notes/disabling-gnome-keyring-daemon-ssh-agent-on-mate-desktop + +export PATH="$HOME/.cargo/bin:$PATH" #+end_src -** Fun :) +*** per-host profiles + +Host-specific profiles, sourced from =~/.profile=. Each +=~/.config/profiles/HOST= file will be sourced on the machine with +=hostname= of =HOST=. -*** eat-em +**** chaman :PROPERTIES: -:header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh" +:header-args+: :tangle ~/.config/profiles/chaman :END: #+begin_src sh -# Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921 -# [ESC] character in original post removed here. +export IS_GUIX_SYSTEM=true -# ANSI Color -- use these variables to easily have different color -# and format output. Make sure to output the reset sequence after -# colors (f = foreground, b = background), and use the 'off' -# feature for anything you turn on. +if [ -x "$(command -v xinput)" ]; then + xinput --set-prop "TPPS/2 IBM TrackPoint" 'libinput Accel Speed' -0.4 +fi -initializeANSI() -{ - esc="$(echo -en '\e')" +setxkbmap \ + -layout us,ir \ + -option ctrl:nocaps \ + -option grp:shifts_toggle - blackf="${esc}[30m"; redf="${esc}[31m"; greenf="${esc}[32m" - yellowf="${esc}[33m" bluef="${esc}[34m"; purplef="${esc}[35m" - cyanf="${esc}[36m"; whitef="${esc}[37m" +xmodmap -e "keysym Menu = Super_R" - blackb="${esc}[40m"; redb="${esc}[41m"; greenb="${esc}[42m" - yellowb="${esc}[43m" blueb="${esc}[44m"; purpleb="${esc}[45m" - cyanb="${esc}[46m"; whiteb="${esc}[47m" +xsetroot -cursor_name left_ptr +xset r rate 200 45 +xset b off +#+end_src - boldon="${esc}[1m"; boldoff="${esc}[22m" - italicson="${esc}[3m"; italicsoff="${esc}[23m" - ulon="${esc}[4m"; uloff="${esc}[24m" - invon="${esc}[7m"; invoff="${esc}[27m" +**** darrud +:PROPERTIES: +:header-args+: :tangle ~/.config/profiles/darrud +:END: + +#+begin_src sh +export INFOPATH="$HOME/usr/local/share/info${INFOPATH:+:}$INFOPATH" +#+end_src + +**** langa +:PROPERTIES: +:header-args+: :tangle ~/.config/profiles/langa +:END: - reset="${esc}[0m" +#+begin_src sh +export XDG_DATA_DIRS="/usr/share/mate:/usr/local/share/:/usr/share/" +#+end_src + +** redshift +:PROPERTIES: +:header-args+: :tangle ~/.config/redshift.conf :comments none +:END: + +#+begin_src conf +; Global settings for redshift +[redshift] +; Set the day and night screen temperatures (Neutral is 6500K) +;temp-day=5700 +;temp-night=3500 + +;temp-day=6500 +temp-day=6200 +;temp-night=4800 +;temp-night=5000 +;temp-night=4500 +temp-night=4000 + +; Enable/Disable a smooth transition between day and night +; 0 will cause a direct change from day to night screen temperature. +; 1 will gradually increase or decrease the screen temperature. +transition=1 + +; Set the screen brightness. Default is 1.0. +;brightness=0.9 +; It is also possible to use different settings for day and night +; since version 1.8. +;brightness-day=0.7 +;brightness-night=0.4 +; Set the screen gamma (for all colors, or each color channel +; individually) +;gamma=0.8 +;gamma=1.0 +;gamma=0.8:0.7:0.8 +; This can also be set individually for day and night since +; version 1.10. +;gamma-day=0.8:0.7:0.8 +;gamma-night=0.6 + +; Set the location-provider: 'geoclue2' or 'manual' +; type 'redshift -l list' to see possible values. +; The location provider settings are in a different section. +;location-provider=manual +location-provider=geoclue2 + +; Set the adjustment-method: 'randr', 'vidmode' +; type 'redshift -m list' to see all possible values. +; 'randr' is the preferred method, 'vidmode' is an older API. +; but works in some cases when 'randr' does not. +; The adjustment method settings are in a different section. +adjustment-method=randr + +; Configuration of the location-provider: +; type 'redshift -l PROVIDER:help' to see the settings. +; ex: 'redshift -l manual:help' +; Keep in mind that longitudes west of Greenwich (e.g. the Americas) +; are negative numbers. +;[manual] +;lat=48.1 +;lon=11.6 + +; Configuration of the adjustment-method +; type 'redshift -m METHOD:help' to see the settings. +; ex: 'redshift -m randr:help' +; In this example, randr is configured to adjust screen 1. +; Note that the numbering starts from 0, so this is actually the +; second screen. If this option is not specified, Redshift will try +; to adjust _all_ screens. +;[randr] +;screen=1 +#+end_src + +** signature +:PROPERTIES: +:header-args+: :tangle ~/.signature +:END: + +My email signature. + +#+begin_src +https://bndl.org +Free Software activist | GNU maintainer & webmaster +GPG: BE62 7373 8E61 6D6D 1B3A 08E8 A21A 0202 4881 6103 +#+end_src + +** systemd + +Keep boot messages on tty1 (see [[https://wiki.archlinux.org/index.php/getty#Have_boot_messages_stay_on_tty1][here]]) + +#+begin_src conf :tangle /sudo::/etc/systemd/system/getty@tty1.service.d/noclear.conf +[Service] +TTYVTDisallocate=no +#+end_src + +** TLP + +*** darrud + +#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "darrud")) "/sudo::/etc/default/tlp") +# ------------------------------------------------------------------------------ +# tlp - Parameters for power saving +# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html + +# Hint: some features are disabled by default, remove the leading # to enable +# them. + +# Set to 0 to disable, 1 to enable TLP. +TLP_ENABLE=1 + +# Operation mode when no power supply can be detected: AC, BAT. +# Concerns some desktop and embedded hardware only. +TLP_DEFAULT_MODE=AC + +# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE +# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC. +TLP_PERSISTENT_DEFAULT=0 + +# Seconds laptop mode has to wait after the disk goes idle before doing a sync. +# Non-zero value enables, zero disables laptop mode. +DISK_IDLE_SECS_ON_AC=0 +DISK_IDLE_SECS_ON_BAT=2 + +# Dirty page values (timeouts in secs). +MAX_LOST_WORK_SECS_ON_AC=15 +MAX_LOST_WORK_SECS_ON_BAT=60 + +# Hint: CPU parameters below are disabled by default, remove the leading # +# to enable them, otherwise kernel default values are used. + +# Select a CPU frequency scaling governor. +# Intel Core i processor with intel_pstate driver: +# powersave(*), performance. +# Older hardware with acpi-cpufreq driver: +# ondemand(*), powersave, performance, conservative, schedutil. +# (*) is recommended. +# Hint: use tlp-stat -p to show the active driver and available governors. +# Important: +# powersave for intel_pstate and ondemand for acpi-cpufreq are power +# efficient for *almost all* workloads and therefore kernel and most +# distributions have chosen them as defaults. If you still want to change, +# you should know what you're doing! You *must* disable your distribution's +# governor settings or conflicts will occur. +#CPU_SCALING_GOVERNOR_ON_AC=powersave +#CPU_SCALING_GOVERNOR_ON_BAT=powersave +CPU_SCALING_GOVERNOR_ON_AC=conservative +CPU_SCALING_GOVERNOR_ON_BAT=conservative + +# Set the min/max frequency available for the scaling governor. +# Possible values strongly depend on your CPU. For available frequencies see +# the output of tlp-stat -p. +#CPU_SCALING_MIN_FREQ_ON_AC=0 +#CPU_SCALING_MAX_FREQ_ON_AC=0 +#CPU_SCALING_MIN_FREQ_ON_BAT=0 +#CPU_SCALING_MAX_FREQ_ON_BAT=0 + +# Set energy performance hints (HWP) for Intel P-state governor: +# performance, balance_performance, default, balance_power, power +# Values are given in order of increasing power saving. +# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required. +CPU_HWP_ON_AC=balance_performance +CPU_HWP_ON_BAT=balance_power + +# Set Intel P-state performance: 0..100 (%). +# Limit the max/min P-state to control the power dissipation of the CPU. +# Values are stated as a percentage of the available performance. +# Requires an Intel Core i processor with intel_pstate driver. +#CPU_MIN_PERF_ON_AC=0 +#CPU_MAX_PERF_ON_AC=100 +#CPU_MIN_PERF_ON_BAT=0 +#CPU_MAX_PERF_ON_BAT=30 + +# Set the CPU "turbo boost" feature: 0=disable, 1=allow +# Requires an Intel Core i processor. +# Important: +# - This may conflict with your distribution's governor settings +# - A value of 1 does *not* activate boosting, it just allows it +#CPU_BOOST_ON_AC=1 +#CPU_BOOST_ON_BAT=0 + +# Minimize number of used CPU cores/hyper-threads under light load conditions: +# 0=disable, 1=enable. +SCHED_POWERSAVE_ON_AC=0 +SCHED_POWERSAVE_ON_BAT=1 + +# Kernel NMI Watchdog: +# 0=disable (default, saves power), 1=enable (for kernel debugging only). +NMI_WATCHDOG=0 + +# Change CPU voltages aka "undervolting" - Kernel with PHC patch required. +# Frequency voltage pairs are written to: +# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls +# CAUTION: only use this, if you thoroughly understand what you are doing! +#PHC_CONTROLS="F:V F:V F:V F:V" + +# Set CPU performance versus energy savings policy: +# performance, balance-performance, default, balance-power, power. +# Values are given in order of increasing power saving. +# Requires kernel module msr and x86_energy_perf_policy from linux-tools. +ENERGY_PERF_POLICY_ON_AC=performance +ENERGY_PERF_POLICY_ON_BAT=balance-power + +# Disk devices; separate multiple devices with spaces (default: sda). +# Devices can be specified by disk ID also (lookup with: tlp diskid). +DISK_DEVICES="sda sdb" + +# Disk advanced power management level: 1..254, 255 (max saving, min, off). +# Levels 1..127 may spin down the disk; 255 allowable on most drives. +# Separate values for multiple disks with spaces. Use the special value 'keep' +# to keep the hardware default for the particular disk. +DISK_APM_LEVEL_ON_AC="254 254" +DISK_APM_LEVEL_ON_BAT="128 128" + +# Hard disk spin down timeout: +# 0: spin down disabled +# 1..240: timeouts from 5s to 20min (in units of 5s) +# 241..251: timeouts from 30min to 5.5 hours (in units of 30min) +# See 'man hdparm' for details. +# Separate values for multiple disks with spaces. Use the special value 'keep' +# to keep the hardware default for the particular disk. +#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0" +#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0" + +# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq). +# Separate values for multiple disks with spaces. Use the special value 'keep' +# to keep the kernel default scheduler for the particular disk. +#DISK_IOSCHED="cfq cfq" + +# AHCI link power management (ALPM) for disk devices: +# min_power, med_power_with_dipm(*), medium_power, max_performance. +# (*) Kernel >= 4.15 required, then recommended. +# Multiple values separated with spaces are tried sequentially until success. +SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance" +SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power" + +# Exclude host devices from AHCI link power management. +# Separate multiple hosts with spaces. +#SATA_LINKPWR_BLACKLIST="host1" + +# Runtime Power Management for AHCI host and disks devices: +# on=disable, auto=enable. +# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss. +#AHCI_RUNTIME_PM_ON_AC=on +#AHCI_RUNTIME_PM_ON_BAT=on + +# Seconds of inactivity before disk is suspended. +AHCI_RUNTIME_PM_TIMEOUT=15 + +# PCI Express Active State Power Management (PCIe ASPM): +# default, performance, powersave. +PCIE_ASPM_ON_AC=performance +PCIE_ASPM_ON_BAT=powersave + +# Radeon graphics clock speed (profile method): low, mid, high, auto, default; +# auto = mid on BAT, high on AC; default = use hardware defaults. +RADEON_POWER_PROFILE_ON_AC=high +RADEON_POWER_PROFILE_ON_BAT=low + +# Radeon dynamic power management method (DPM): battery, performance. +RADEON_DPM_STATE_ON_AC=performance +RADEON_DPM_STATE_ON_BAT=battery + +# Radeon DPM performance level: auto, low, high; auto is recommended. +RADEON_DPM_PERF_LEVEL_ON_AC=auto +RADEON_DPM_PERF_LEVEL_ON_BAT=auto + +# WiFi power saving mode: on=enable, off=disable; not supported by all adapters. +WIFI_PWR_ON_AC=off +WIFI_PWR_ON_BAT=on + +# Disable wake on LAN: Y/N. +WOL_DISABLE=Y + +# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs). +# A value of 0 disables, >=1 enables power saving (recommended: 1). +SOUND_POWER_SAVE_ON_AC=0 +SOUND_POWER_SAVE_ON_BAT=0 + +# Disable controller too (HDA only): Y/N. +SOUND_POWER_SAVE_CONTROLLER=N + +# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable. +# Drive can be powered on again by releasing (and reinserting) the eject lever +# or by pressing the disc eject button on newer models. +# Note: an UltraBay/MediaBay hard disk is never powered off. +BAY_POWEROFF_ON_AC=0 +BAY_POWEROFF_ON_BAT=0 +# Optical drive device to power off (default sr0). +BAY_DEVICE="sr0" + +# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable. +RUNTIME_PM_ON_AC=on +RUNTIME_PM_ON_BAT=auto + +# Exclude PCI(e) device adresses the following list from Runtime PM +# (separate with spaces). Use lspci to get the adresses (1st column). +#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6" +RUNTIME_PM_BLACKLIST="01:00.0" + +# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM. +# Default when unconfigured is "amdgpu nouveau nvidia radeon" which +# prevents accidential power-on of dGPU in hybrid graphics setups. +# Use "" to disable the feature completely. +# Separate multiple drivers with spaces. +#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon" + +# Set to 0 to disable, 1 to enable USB autosuspend feature. +USB_AUTOSUSPEND=1 + +# Exclude listed devices from USB autosuspend (separate with spaces). +# Use lsusb to get the ids. +# Note: input devices (usbhid) are excluded automatically +#USB_BLACKLIST="1111:2222 3333:4444" + +# Bluetooth devices are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude. +USB_BLACKLIST_BTUSB=0 + +# Phone devices are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude (enable charging). +USB_BLACKLIST_PHONE=0 + +# Printers are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude. +USB_BLACKLIST_PRINTER=1 + +# WWAN devices are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude. +USB_BLACKLIST_WWAN=1 + +# Include listed devices into USB autosuspend even if already excluded +# by the blacklists above (separate with spaces). +# Use lsusb to get the ids. +#USB_WHITELIST="1111:2222 3333:4444" + +# Set to 1 to disable autosuspend before shutdown, 0 to do nothing +# (workaround for USB devices that cause shutdown problems). +#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1 + +# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown +# on system startup: 0=disable, 1=enable. +# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below +# are ignored when this is enabled! +#RESTORE_DEVICE_STATE_ON_STARTUP=0 +RESTORE_DEVICE_STATE_ON_STARTUP=1 + +# Radio devices to disable on startup: bluetooth, wifi, wwan. +# Separate multiple devices with spaces. +#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan" + +# Radio devices to enable on startup: bluetooth, wifi, wwan. +# Separate multiple devices with spaces. +#DEVICES_TO_ENABLE_ON_STARTUP="wifi" + +# Radio devices to disable on shutdown: bluetooth, wifi, wwan. +# (workaround for devices that are blocking shutdown). +#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan" + +# Radio devices to enable on shutdown: bluetooth, wifi, wwan. +# (to prevent other operating systems from missing radios). +#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan" + +# Radio devices to enable on AC: bluetooth, wifi, wwan. +#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan" + +# Radio devices to disable on battery: bluetooth, wifi, wwan. +#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan" + +# Radio devices to disable on battery when not in use (not connected): +# bluetooth, wifi, wwan. +#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan" + +# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module +# required). Charging starts when the remaining capacity falls below the +# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value. +# Main / Internal battery (values in %) +#START_CHARGE_THRESH_BAT0=75 +#STOP_CHARGE_THRESH_BAT0=80 +# Ultrabay / Slice / Replaceable battery (values in %) +#START_CHARGE_THRESH_BAT1=75 +#STOP_CHARGE_THRESH_BAT1=80 + +# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable. +#RESTORE_THRESHOLDS_ON_BAT=1 + +# ------------------------------------------------------------------------------ +# tlp-rdw - Parameters for the radio device wizard +# Possible devices: bluetooth, wifi, wwan. + +# Hints: +# - Parameters are disabled by default, remove the leading # to enable them +# - Separate multiple radio devices with spaces + +# Radio devices to disable on connect. +#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan" +#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan" +#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi" + +# Radio devices to enable on disconnect. +#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan" +#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT="" +#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT="" + +# Radio devices to enable/disable when docked. +#DEVICES_TO_ENABLE_ON_DOCK="" +#DEVICES_TO_DISABLE_ON_DOCK="" + +# Radio devices to enable/disable when undocked. +#DEVICES_TO_ENABLE_ON_UNDOCK="wifi" +#DEVICES_TO_DISABLE_ON_UNDOCK="" +#+end_src + +** Tridactyl +:PROPERTIES: +:header-args+: :tangle ~/.config/tridactyl/tridactylrc +:END: + +#+begin_src conf +bind n scrollline 2 +bind p scrollline -2 + +bind 0 scrollto 0 x +bind - scrollto 100 x + +bind P tabprev +bind N tabnext + +bind d scrollpage 0.5 +bind u scrollpage -0.5 +unbind +unbind + +bind x tabclose +bind X undo +bind stop + +bind gd tabduplicate +bind gw tabdetach + +bind O fillcmdline bmarks + +bind ; fillcmdline_notrail + +unbind + +set hintfiltermode vimperator-reflow +set hintnames numeric +set urlparenttrailingslash false + +set browser abrowser +" set newtab https://bandali.eu.org + +seturl warrior.uwaterloo.ca noiframe true + +" autocmd DocStart www.reddit.com js tri.excmds.urlmodify("-t", "www", "old") +#+end_src + +** X + +*** xinit +:PROPERTIES: +:header-args+: :tangle ~/.xinitrc +:END: + +#+begin_src sh +[ -f ~/.Xresources ] && xrdb -merge ~/.Xresources +#+end_src + +*** X resources + +#+begin_src conf-xdefaults :tangle (when (eq system-type 'gnu/linux) "~/.Xresources") +#include ".Xresources.d/fonts" +#include ".Xresources.d/emacs" +#include ".Xresources.d/rxvt-unicode" +#+end_src + +**** emacs +:PROPERTIES: +:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs") +:END: + +#+begin_src conf-xdefaults +Emacs.menuBar: off +Emacs.toolBar: off +Emacs.verticalScrollBars: off +Emacs.cursorBlink: off +Emacs.FontBackend: ftcrhb,x +!Emacs.FontBackend: xft,x +! Emacs.font: Ubuntu Mono-12 +! Emacs.font: Triplicate T4C-11 +! Emacs.font: Ubuntu Mono-10.5 +! Emacs.font: Ubuntu Mono-12 +! Emacs.font: Iosevka-11 + +! Emacs.font: Fira Mono:size=15 +! Emacs.font: DejaVu Sans Mono:size=15 +! Emacs.font: Inconsolata:size=17 +! Emacs.font: Inconsolata:size=16 +! Emacs.font: Inconsolata LGC:size=14 +! Emacs.font: Source Code Pro Medium-10.5 +Emacs.font: Source Code Pro Medium:size=14 +!Emacs.font: Vazir:size=14 +! Emacs.font: Ubuntu Mono:size=16 +! Emacs.font: Iosevka:size=16 +#+end_src + +**** fonts +:PROPERTIES: +:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts") +:END: + +#+begin_src conf-xdefaults +Xft.lcdfilter: lcddefault +Xft.antialias: true +Xft.autohint: 0 +Xft.hinting: true +Xft.hintstyle: hintslight +! Xft.hintstyle: hintfull +Xft.rgba: rgb +Xft.dpi: 96 +#+end_src + +**** rxvt-unicode +:PROPERTIES: +:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode") +:END: + +#+begin_src conf-xdefaults +! Font +URxvt.font: xft:source code pro:pixelsize=14:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true +URxvt.boldFont: xft:source code pro:semibold:pixelsize=14:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold +URxvt.italicFont: xft:source code pro:italic:pixelsize=14:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic +URxvt.bolditalicFont: xft:source code pro:semibold:italic:pixelsize=14:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic + +URxvt.xftAntialias: true +URxvt.letterSpace: -1 + +!URxvt.depth: 0 +!URxvt.loginShell: true +!URxvt*buffered: false +URxvt.saveLines: 100000 +URxvt.internalBorder: 3 +URxvt.lineSpace: 0 +URxvt.scrollBar: false +URxvt.scrollStyle: rxvt +URxvt*scrollTtyOutput: false +URxvt*scrollWithBuffer: true +URxvt*scrollTtyKeypress: true +URxvt.keysym.Shift-Up: command:\033]720;1\007 +URxvt.keysym.Shift-Down: command:\033]721;1\007 + +URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select +URxvt.url-select.launcher: firefox +URxvt.url-select.underline: true +URxvt.keysym.M-u: perl:url-select:select_next +URxvt.keysym.M-Escape: perl:keyboard-select:activate +URxvt.keysym.M-s: perl:keyboard-select:search +URxvt.url-launcher: /usr/bin/abrowser +URxvt.matcher.button: 1 +! URxvt.iso14755: false +! URxvt.iso14755_53: false +! URxvt.keysym.M-c: perl:clipboard:copy +! URxvt.keysym.M-v: perl:clipboard:paste +URxvt.keysym.M-c: eval:selection_to_clipboard +URxvt.keysym.M-v: eval:paste_clipboard +URxvt.keysym.C-A-V: perl:clipboard:paste_escaped +! URxvt.keysym.Shift-Control-C: eval:selection_to_clipboard +! URxvt.keysym.Shift-Control-V: eval:paste_clipboard +URxvt.keysym.C-Up: font-size:increase +URxvt.keysym.C-Down: font-size:decrease +URxvt.keysym.C-S-Up: font-size:incglobal +URxvt.keysym.C-S-Down: font-size:decglobal +URxvt.keysym.C-equal: font-size:reset +!URxvt.keysym.C-question: font-size:show + +!URxvt.iconFile: /usr/share/icons/elementary-xfce/apps/48/terminal.png + +!urxvt*foreground: white +!urxvt*background: black + +!*color0: #2E3436 +!*color1: #a40000 +!*color2: #4E9A06 +!*color3: #C4A000 +!*color4: #3465A4 +!*color5: #75507B +!*color6: #ce5c00 +!*color7: #babdb9 +!*color8: #555753 +!*color9: #EF2929 +!*color10: #8AE234 +!*color11: #FCE94F +!*color12: #729FCF +!*color13: #AD7FA8 +!*color14: #fcaf3e +!*color15: #EEEEEC + +!URxvt.foreground: #C8C8C8 +!URxvt.background: #FFFFFF + +!! black +!*color0: #2E3436 +!*color8: #555753 +!! red +!*color1: #a40000 +!*color9: #EF2929 +!! green +!*color2: #4E9A06 +!*color10: #8AE234 +!! yellow +!*color3: #C4A000 +!*color11: #FCE94F +!! blue +!*color4: #3465A4 +!*color12: #729FCF +!! purple +!*color5: #75507B +!*color13: #AD7FA8 +!! orange (replaces cyan) +!*color6: #ce5c00 +!*color14: #fcaf3e +!! white +!*color7: #babdb9 +!*color15: #EEEEEC + + +! ! Solarized +! ! Base16 Solarized Light +! ! Scheme: Ethan Schoonover (http://ethanschoonover.com/solarized) + +! #define base00 #fdf6e3 +! #define base01 #eee8d5 +! #define base02 #93a1a1 +! #define base03 #839496 +! #define base04 #657b83 +! #define base05 #586e75 +! #define base06 #073642 +! #define base07 #002b36 +! #define base08 #dc322f +! #define base09 #cb4b16 +! #define base0A #b58900 +! #define base0B #859900 +! #define base0C #2aa198 +! #define base0D #268bd2 +! #define base0E #6c71c4 +! #define base0F #d33682 + +! *foreground: base05 +! #ifdef background_opacity +! *background: [background_opacity]base00 +! #else +! *background: base00 +! #endif +! *cursorColor: base05 + +! *color0: base00 +! *color1: base08 +! *color2: base0B +! *color3: base0A +! *color4: base0D +! *color5: base0E +! *color6: base0C +! *color7: base05 + +! *color8: base03 +! *color9: base08 +! *color10: base0B +! *color11: base0A +! *color12: base0D +! *color13: base0E +! *color14: base0C +! *color15: base07 + +! ! Note: colors beyond 15 might not be loaded (e.g., xterm, urxvt), +! ! use 'shell' template to set these if necessary +! *color16: base09 +! *color17: base0F +! *color18: base01 +! *color19: base02 +! *color20: base04 +! *color21: base06 + + +! Tango colour theme for rxvt-unicode +URxvt.background: #FFFFFF +URxvt.foreground: #000000 + +! Black +URxvt.color0: #2E3436 +URxvt.color8: #757773 + +! Red +URxvt.color1: #CC0000 +URxvt.color9: #EF2929 + +! Green +URxvt.color2: #4E9A06 +URxvt.color10: #8AE234 + +! Yellow +URxvt.color3: #C4A000 +URxvt.color11: #FCE94F + +! Blue +URxvt.color4: #3465A4 +URxvt.color12: #729FCF + +! Magenta +URxvt.color5: #75507B +URxvt.color13: #AD7FA8 + +!! Cyan +!URxvt.color6: #06989A +!URxvt.color14: #34E2E2 +! orange (replaces cyan) +,,*color6: #ce5c00 +,,*color14: #fcaf3e + +! White +URxvt.color7: #D3D7CF +URxvt.color15: #EEEEEC +#+end_src + +*** ~/.xsession +:PROPERTIES: +:header-args+: :tangle ~/.xsession :tangle-mode (identity #o755) +:END: + +For custom session on Debian. See https://wiki.debian.org/Xsession. + +#+begin_src sh +if [ -f "$HOME/.xinitrc" ]; then + . "$HOME/.xinitrc" +fi + +[ -f "/usr/lib/x86_64-linux-gnu/xfce4/notifyd/xfce4-notifyd" ] && /usr/lib/x86_64-linux-gnu/xfce4/notifyd/xfce4-notifyd & +[ -x "$(command -v light-locker)" ] && light-locker --lock-on-suspend & +[ -x "$(command -v pasystray)" ] && pasystray -a & +[ -x "$(command -v nm-applet)" ] && nm-applet & +[ -x "$(command -v compton)" ] && compton & +[ -x "$(command -v dunst)" ] && dunst & +[ -x "$(command -v emacs)" ] && exec ssh-agent exwm -ib 0 +#+end_src + +*** ~/.xsessionrc +:PROPERTIES: +:header-args+: :tangle ~/.xsessionrc +:END: + +#+begin_src sh +if [ -f "$HOME/.profile" ]; then . "$HOME/.profile"; fi +#+end_src + +** XDG +:PROPERTIES: +:header-args+: :tangle ~/.config/user-dirs.dirs +:END: + +#+begin_src conf +XDG_DESKTOP_DIR="$HOME/Desktop" +XDG_DOCUMENTS_DIR="$HOME/usr/doc" +XDG_DOWNLOAD_DIR="$HOME/usr/dl" +XDG_MUSIC_DIR="$HOME/usr/music" +XDG_PICTURES_DIR="$HOME/usr/pic" +XDG_PUBLICSHARE_DIR="$HOME/usr/pub" +XDG_TEMPLATES_DIR="$HOME/usr/temp" +XDG_VIDEOS_DIR="$HOME/usr/vid" +#+end_src + +** zathura +:PROPERTIES: +:header-args+: :tangle ~/.config/zathura/zathurarc +:END: + +#+begin_src conf +set smooth-scroll true +set selection-clipboard clipboard +set zoom-step 05 +set default-bg "#272727" +set statusbar-bg "#272727" +set inputbar-bg "#373737" +set window-title-basename true +set statusbar-home-tilde true + +map scroll down +map scroll up + +map H jumplist backward +map L jumplist forward + +map [normal] i toggle_index +map [index] i toggle_index +map [index] q toggle_index +#+end_src + +* Scripts + +This section contains various useful scripts including ones used by +the programs above. For instance, =toggle-tablet= for switching to +and from tablet mode on my X220T, =toggle-presentation-mode= for +toggling Xfce's presentation mode which keeps the screen awake, and +=rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an +exact brightness value. + +** battery-percentage-time +:PROPERTIES: +:header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/sh" +:END: + +#+begin_src sh :tangle no +dbus_send() { + label=$1 + dbus-send --print-reply=literal --system \ + --dest=org.freedesktop.UPower \ + /org/freedesktop/UPower/devices/battery_BAT0 \ + org.freedesktop.DBus.Properties.Get \ + string:org.freedesktop.UPower.Device \ + string:"${label}" | awk '{print $3}' } -# note in this first use that switching colors doesn't require a reset -# first - the new color overrides the old one. +perc=$(dbus_send 'Percentage') +state=$(dbus_send 'State') + +if [ "$state" -eq 2 ]; then # Discharging + secs=$(dbus_send 'TimeToEmpty') +elif [ "$state" -eq 1 ]; then # Charging + secs=$(dbus_send 'TimeToFull') +fi + +printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60)) +#+end_src -#clear +** emcl +:PROPERTIES: +:header-args+: :tangle ~/.local/bin/emcl :shebang "#!/bin/sh" +:END: -initializeANSI +#+begin_src sh +exec emacsclient --alternate-editor="" -c "$@" +#+end_src -cat << EOF +** my-i3status +:PROPERTIES: +:header-args+: :tangle ~/.local/bin/my-i3status :shebang "#!/usr/bin/env python2" +:END: - ${yellowf} ▄███████▄${reset} ${redf} ▄██████▄${reset} ${greenf} ▄██████▄${reset} ${bluef} ▄██████▄${reset} ${purplef} ▄██████▄${reset} ${cyanf} ▄██████▄${reset} - ${yellowf}▄█████████▀▀${reset} ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset} ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset} ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset} ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset} ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset} - ${yellowf}███████▀${reset} ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset} ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset} ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset} ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset} ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset} - ${yellowf}███████▄${reset} ${redf}████████████${reset} ${greenf}████████████${reset} ${bluef}████████████${reset} ${purplef}████████████${reset} ${cyanf}████████████${reset} - ${yellowf}▀█████████▄▄${reset} ${redf}██▀██▀▀██▀██${reset} ${greenf}██▀██▀▀██▀██${reset} ${bluef}██▀██▀▀██▀██${reset} ${purplef}██▀██▀▀██▀██${reset} ${cyanf}██▀██▀▀██▀██${reset} - ${yellowf} ▀███████▀${reset} ${redf}▀ ▀ ▀ ▀${reset} ${greenf}▀ ▀ ▀ ▀${reset} ${bluef}▀ ▀ ▀ ▀${reset} ${purplef}▀ ▀ ▀ ▀${reset} ${cyanf}▀ ▀ ▀ ▀${reset} +#+begin_src python +# -*- coding: utf-8 -*- + +# This script is a simple wrapper which prefixes each i3status line with custom +# information. It is based on: +# https://github.com/i3/i3status/blob/master/contrib/wrapper.py +# +# In ~/.i3status.conf, add the following line: +# output_format = "i3bar" +# in the 'general' section. +# Then, in ~/.config/i3/config or ~/.config/sway/config add: +# status_command i3status | my-i3status.py +# in the 'bar' section. Make sure my-i3status.py is in $PATH. +# +# © 2012 Valentin Haenel +# © 2018 Amin Bandali +# +# This program is free software. It comes without any warranty, to the extent +# permitted by applicable law. You can redistribute it and/or modify it under +# the terms of the Do What The Fuck You Want To Public License (WTFPL), Version +# 2, as published by Sam Hocevar. See http://sam.zoy.org/wtfpl/COPYING for more +# details. + +import sys +import json +import os + +def get_nosleep(): + """ Return true if ~/.nosleep exists. """ + return os.path.isfile(os.path.expanduser("~/.nosleep")) + +def print_line(message): + """ Non-buffered printing to stdout. """ + sys.stdout.write(message + '\n') + sys.stdout.flush() + +def read_line(): + """ Interrupted respecting reader for stdin. """ + # try reading a line, removing any extra whitespace + try: + line = sys.stdin.readline().strip() + # i3status sends EOF, or an empty line + if not line: + sys.exit(3) + return line + # exit on ctrl-c + except KeyboardInterrupt: + sys.exit() + +if __name__ == '__main__': + # Skip the first line which contains the version header. + print_line(read_line()) + + # The second line contains the start of the infinite array. + print_line(read_line()) + + while True: + line, prefix = read_line(), '' + # ignore comma at start of lines + if line.startswith(','): + line, prefix = line[1:], ',' + + if get_nosleep(): + j = json.loads(line) + # insert information into the start of the json, but could be anywhere + j.insert(0, {'full_text' : '•', 'name' : 'nosleep'}) + # and echo back new encoded json + print_line(prefix+json.dumps(j)) + else: + print_line(prefix+line) +#+end_src - ${boldon}${yellowf} ▄███████▄ ${redf} ▄██████▄ ${greenf} ▄██████▄ ${bluef} ▄██████▄ ${purplef} ▄██████▄ ${cyanf} ▄██████▄${reset} - ${boldon}${yellowf}▄█████████▀▀ ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄ ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄ ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄ ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄ ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset} - ${boldon}${yellowf}███████▀ ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███ ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███ ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███ ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███ ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset} - ${boldon}${yellowf}███████▄ ${redf}████████████ ${greenf}████████████ ${bluef}████████████ ${purplef}████████████ ${cyanf}████████████${reset} - ${boldon}${yellowf}▀█████████▄▄ ${redf}██▀██▀▀██▀██ ${greenf}██▀██▀▀██▀██ ${bluef}██▀██▀▀██▀██ ${purplef}██▀██▀▀██▀██ ${cyanf}██▀██▀▀██▀██${reset} - ${boldon}${yellowf} ▀███████▀ ${redf}▀ ▀ ▀ ▀ ${greenf}▀ ▀ ▀ ▀ ${bluef}▀ ▀ ▀ ▀ ${purplef}▀ ▀ ▀ ▀ ${cyanf}▀ ▀ ▀ ▀${reset} +** rofi-light +:PROPERTIES: +:header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/sh" +:END: -EOF +#+begin_src sh +cur=$(light -G) +val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 12) +[ -n "$val" ] && light -S "$val" #+end_src -*** invade-em +** rofi-remmina :PROPERTIES: -:header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash" +:header-args+: :tangle ~/.local/bin/rofi-remmina :shebang "#!/usr/bin/env python2" :END: -#+begin_src bash -# -# ANSI color scheme script featuring Space Invaders -# -# Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921 -# Modified by lolilolicon -# +#+begin_src python +import ConfigParser +import os +from subprocess import Popen, PIPE + +remmina_dir = os.path.expanduser("~/.local/share/remmina") + +fdict = dict() + +for f in os.listdir(remmina_dir): + fp = os.path.join(remmina_dir, f) + c = ConfigParser.ConfigParser() + c.read(fp) + n = c.get('remmina', 'name') + fdict[n] = fp + +lines = max(min(15, len(fdict)), 1); +width = len(max(fdict.keys(), key=len)) +rofi = Popen(["rofi", "-i", "-dmenu", \ + "-l", str(lines), "-width", str(width), \ + "-p", "connection"], stdout=PIPE, stdin=PIPE) +selected = rofi.communicate("\n" \ + .join(fdict.keys()) \ + .encode("utf-8"))[0] \ + .decode("utf-8") \ + .strip() +rofi.wait() + +r = Popen(["remmina", "-c", fdict[selected]]) +r.wait() +#+end_src -f=3 b=4 -for j in f b; do - for i in {0..7}; do - printf -v $j$i %b "\e[${!j}${i}m" - done -done -bld=$'\e[1m' -rst=$'\e[0m' +** toggle-presentation-mode +:PROPERTIES: +:header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/sh" +:END: -cat << EOF +#+begin_src sh +xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T +#+end_src - $f1 ▀▄ ▄▀ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4 ▀▄ ▄▀ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst - $f1 ▄█▀███▀█▄ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4 ▄█▀███▀█▄ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst - $f1█▀███████▀█ $f2▀▀███▀▀███▀▀ $f3▀█▀██▀█▀ $f4█▀███████▀█ $f5▀▀███▀▀███▀▀ $f6▀█▀██▀█▀$rst - $f1▀ ▀▄▄ ▄▄▀ ▀ $f2 ▀█▄ ▀▀ ▄█▀ $f3▀▄ ▄▀ $f4▀ ▀▄▄ ▄▄▀ ▀ $f5 ▀█▄ ▀▀ ▄█▀ $f6▀▄ ▄▀$rst +** toggle-tablet +:PROPERTIES: +:header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/sh" +:END: - $bld$f1▄ ▀▄ ▄▀ ▄ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4▄ ▀▄ ▄▀ ▄ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst - $bld$f1█▄█▀███▀█▄█ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4█▄█▀███▀█▄█ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst - $bld$f1▀█████████▀ $f2▀▀▀██▀▀██▀▀▀ $f3▀▀█▀▀█▀▀ $f4▀█████████▀ $f5▀▀▀██▀▀██▀▀▀ $f6▀▀█▀▀█▀▀$rst - $bld$f1 ▄▀ ▀▄ $f2▄▄▀▀ ▀▀ ▀▀▄▄ $f3▄▀▄▀▀▄▀▄ $f4 ▄▀ ▀▄ $f5▄▄▀▀ ▀▀ ▀▀▄▄ $f6▄▀▄▀▀▄▀▄$rst +#+begin_src sh +# This script toggles between a 'normal' mode and a 'tablet' mode, doing +# a few things: + +# - rotates the screen using =xrandr=, so that rotating the physical +# display of my X220t would have the laptop's battery on the right +# hand side, +# - enables touch screen, +# - properly rotates the stylus pen and touch screen pointers, and +# - toggles between RGB and Vertical BGR sub-pixel order. + +case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in + 0) # Screen is not rotated, we should rotate it right (90°) + xrandr -o 3 + xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1 + xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1 + xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1 + xfconf-query -c xsettings -p /Xft/RGBA -s vbgr + ;; + 1) # Currently top is rotated right, we should set it normal (0°) + xrandr -o 0 + xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0 + xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0 + xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0 + xfconf-query -c xsettings -p /Xft/RGBA -s rgb + ;; + ,*) + echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2 + exit 1 + ;; +esac +#+end_src +** volume-info +:PROPERTIES: +:header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh" +:END: - $f7▌$rst +#+begin_src sh +cur_vol=$(pamixer --get-volume) - $f7▌$rst +if [ $(pamixer --get-mute) = true ]; then + printf 'mt \n' "$cur_vol" +else + printf '%02d \n' "$cur_vol" +fi +#+end_src - $f7 ▄█▄ $rst - $f7▄█████████▄$rst - $f7▀▀▀▀▀▀▀▀▀▀▀$rst +** zathura-sync +:PROPERTIES: +:header-args+: :tangle ~/.local/bin/zathura-sync :shebang "#!/bin/sh" +:END: -EOF +#+begin_src sh +pos="$1" +pdffile="$2" +zathura --synctex-forward "$pos" "$pdffile" || \ + ( + zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" & + sleep 1; zathura --synctex-forward "$pos" "$pdffile" ) #+end_src