X-Git-Url: https://git.shemshak.org/gitweb.cgi/~bandali/configs/blobdiff_plain/669d7322ff6068bd09061c8e729baf5f81f02b29..ab7314d9802fd1cf56ffcfe1901afd4fb8587b20:/rc.org?ds=inline diff --git a/rc.org b/rc.org index be3da30..098a073 100644 --- a/rc.org +++ b/rc.org @@ -429,6 +429,11 @@ use_apop = True type = Maildir path = ~/mail/gnu/Inbox/ +# [destination] +# type = MDA_external +# path = /usr/lib/dovecot/deliver +# arguments = ('-d', 'amin@aminb.org') + [options] delete = True #+end_src @@ -708,7 +713,7 @@ order += "disk /data" order += "ethernet _first_" order += "battery 0" order += "volume master" -order += "load" +# order += "load" order += "tztime local" wireless _first_ { @@ -718,12 +723,13 @@ wireless _first_ { ethernet _first_ { # if you use %speed, i3status requires root privileges - format_up = "E: %ip (%speed)" + # format_up = "E: %ip (%speed)" + format_up = "E: %ip" format_down = "E: down" } battery 0 { - format = "%status %percentage %remaining (%consumption)" + format = "%status %percentage %remaining %consumption" path = "/sys/class/power_supply/BAT%d/uevent" low_threshold = "10" threshold_type = "percentage" @@ -733,7 +739,7 @@ battery 0 { } tztime local { - format = "%-I:%M%P %a %b %d" + format = "%A %Y-%m-%d %I:%M %p" } volume master { @@ -770,8 +776,8 @@ Expunge Both ###### IMAPAccount amin -Host mail.aminb.org -User amin@aminb.org +Host mail.bndl.org +User amin@bndl.org PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg" SSLType IMAPS @@ -781,7 +787,7 @@ Account amin IMAPAccount amin-dovecot Host 127.0.0.1 Port 143 -User amin@aminb.org +User amin@bndl.org PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin-dovecot.gpg" SSLType None @@ -817,6 +823,31 @@ Channel uwaterloo Master :uwaterloo-remote: Slave :uwaterloo-local: Patterns * + +###### +IMAPAccount csclub +Host mail.csclub.uwaterloo.ca +User abandali +PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/csclub.gpg" +SSLType IMAPS + +IMAPStore csclub-remote +Account csclub + +IMAPAccount csclub-dovecot +Host 127.0.0.1 +Port 143 +User abandali@csclub.uw +PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/csclub-dovecot.gpg" +SSLType None + +IMAPStore csclub-local +Account csclub-dovecot + +Channel csclub +Master :csclub-remote: +Slave :csclub-local: +Patterns * #+end_src *** mbsync.service @@ -889,6 +920,77 @@ Section "InputClass" EndSection #+end_src +** mkinitcpio + +#+begin_src conf :tangle /sudo::/etc/mkinitcpio.conf :comments none +# vim:set ft=sh +# MODULES +# The following modules are loaded before any boot hooks are +# run. Advanced users may wish to specify all system modules +# in this array. For instance: +# MODULES=(piix ide_disk reiserfs) +MODULES=(i915) + +# BINARIES +# This setting includes any additional binaries a given user may +# wish into the CPIO image. This is run last, so it may be used to +# override the actual binaries included by a given hook +# BINARIES are dependency parsed, so you may safely ignore libraries +BINARIES=() + +# FILES +# This setting is similar to BINARIES above, however, files are added +# as-is and are not parsed in any way. This is useful for config files. +FILES=() + +# HOOKS +# This is the most important setting in this file. The HOOKS control the +# modules and scripts added to the image, and what happens at boot time. +# Order is important, and it is recommended that you do not change the +# order in which HOOKS are added. Run 'mkinitcpio -H ' for +# help on a given hook. +# 'base' is _required_ unless you know precisely what you are doing. +# 'udev' is _required_ in order to automatically load modules +# 'filesystems' is _required_ unless you specify your fs modules in MODULES +# Examples: +## This setup specifies all modules in the MODULES setting above. +## No raid, lvm2, or encrypted root is needed. +# HOOKS=(base) +# +## This setup will autodetect all modules for your system and should +## work as a sane default +# HOOKS=(base udev autodetect block filesystems) +# +## This setup will generate a 'full' image which supports most systems. +## No autodetection is done. +# HOOKS=(base udev block filesystems) +# +## This setup assembles a pata mdadm array with an encrypted root FS. +## Note: See 'mkinitcpio -H mdadm' for more information on raid devices. +# HOOKS=(base udev block mdadm encrypt filesystems) +# +## This setup loads an lvm2 volume group on a usb device. +# HOOKS=(base udev block lvm2 filesystems) +# +## NOTE: If you have /usr on a separate partition, you MUST include the +# usr, fsck and shutdown hooks. +HOOKS=(base udev autodetect modconf block keyboard encrypt lvm2 resume filesystems fsck) + +# COMPRESSION +# Use this to compress the initramfs image. By default, gzip compression +# is used. Use 'cat' to create an uncompressed image. +#COMPRESSION="gzip" +#COMPRESSION="bzip2" +#COMPRESSION="lzma" +#COMPRESSION="xz" +#COMPRESSION="lzop" +#COMPRESSION="lz4" + +# COMPRESSION_OPTIONS +# Additional options for the compressor +#COMPRESSION_OPTIONS=() +#+end_src + ** mpd :PROPERTIES: :header-args+: :tangle ~/.config/mpd/mpd.conf @@ -1318,24 +1420,24 @@ auth on #tls_trust_file /etc/ssl/certs/ca-certificates.crt logfile ~/.msmtp.log -# aminb -account aminb -host mail.aminb.org -# use `msmtp -a aminb --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint -tls_fingerprint DE:5F:73:0C:F7:9A:7B:1D:55:AA:49:28:E7:28:49:24:A4:08:55:00:7A:7E:D8:7F:30:06:26:24:11:29:61:07 +# amin +account amin +host mail.bndl.org +# use `msmtp -a amin --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint +tls_fingerprint B8:17:DF:D7:26:56:4F:CD:F0:51:D5:E5:4C:44:B6:F1:C9:47:E7:A2:C7:36:C9:C1:F2:10:85:18:43:72:9D:ED tls_starttls on -from amin@aminb.org -user amin@aminb.org +from amin@bndl.org +user amin@bndl.org passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg -account bandali-me : aminb -from amin@bandali.me +account aminb : amin +from amin@aminb.org # gnu account gnu host fencepost.gnu.org # use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint -tls_fingerprint 93:59:52:1D:A6:95:13:31:7C:81:ED:DB:A5:BA:B5:2B:C8:BC:38:3E:71:A5:DF:8C:80:46:C1:E0:5D:2D:F4:E3 +tls_fingerprint FB:DB:E3:7D:96:22:22:20:9F:4A:FD:70:96:99:50:5C:39:B2:29:D9:47:47:52:A8:5A:4A:DF:70:9D:21:DE:C4 tls_starttls on from bandali@gnu.org user bandali @@ -1358,8 +1460,17 @@ user abandali passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg tls_trust_file /etc/ssl/certs/ca-certificates.crt +# csclub +account csclub +host mail.csclub.uwaterloo.ca +tls_starttls on +from abandali@csclub.uwaterloo.ca +user abandali +passwordeval gpg2 --no-tty -q -d ~/.passwd/csclub.gpg +tls_trust_file /etc/ssl/certs/ca-certificates.crt + # Set a default account -account default : aminb +account default : amin #+end_src ** ncmpcpp @@ -2162,10 +2273,230 @@ Unit=notmuch.service WantedBy=timers.target #+end_src +** pacman + +*** conf + +#+begin_src conf :tangle /sudo::/etc/pacman.conf :comments none +# +# /etc/pacman.conf +# +# See the pacman.conf(5) manpage for option and repository directives + +# +# GENERAL OPTIONS +# +[options] +# The following paths are commented out with their default values listed. +# If you wish to use different paths, uncomment and update the paths. +#RootDir = / +#DBPath = /var/lib/pacman/ +#CacheDir = /var/cache/pacman/pkg/ +#LogFile = /var/log/pacman.log +#GPGDir = /etc/pacman.d/gnupg/ +#HookDir = /etc/pacman.d/hooks/ +HoldPkg = pacman glibc +#XferCommand = /usr/bin/curl -L -C - -f -o %o %u +#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u +#CleanMethod = KeepInstalled +#UseDelta = 0.7 +Architecture = auto + +# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup +#IgnorePkg = +#IgnoreGroup = + +#NoUpgrade = +#NoExtract = + +# Misc options +#UseSyslog +Color +TotalDownload +CheckSpace +VerbosePkgLists + +# By default, pacman accepts packages signed by keys that its local keyring +# trusts (see pacman-key and its man page), as well as unsigned packages. +SigLevel = Required DatabaseOptional +LocalFileSigLevel = Optional +#RemoteFileSigLevel = Required + +# NOTE: You must run `pacman-key --init` before first using pacman; the local +# keyring can then be populated with the keys of all Arch/Parabola packagers +# with `pacman-key --populate archlinux` and `pacman-key --populate parabola`. + +# +# REPOSITORIES +# - can be defined here or included from another file +# - pacman will search repositories in the order defined here +# - local/custom mirrors can be added here or in separate files +# - repositories listed first will take precedence when packages +# have identical names, regardless of version number +# - URLs will have $repo replaced by the name of the current repo +# - URLs will have $arch replaced by the name of the architecture +# +# Repository entries are of the format: +# [repo-name] +# Server = ServerName +# Include = IncludePath +# +# The header [repo-name] is crucial - it must be present and +# uncommented to enable the repo. +# + +# The testing repositories are disabled by default. To enable, uncomment the +# repo name header and Include lines. You can add preferred servers immediately +# after the header, and they will be used before the default mirrors. + +# NOTE: Nonprism is a particular repository that aims to provide software built +# and patched without services under global data surveillance programs like PRISM, +# XKeyscore and Tempora. For more info see: https://wiki.parabola.nu/Nonprism + +#[nonprism-testing] +#Include = /etc/pacman.d/mirrorlist + +#[nonprism] +#Include = /etc/pacman.d/mirrorlist + +[libre-testing] +Include = /etc/pacman.d/mirrorlist + +[libre] +Include = /etc/pacman.d/mirrorlist + +#[testing] +#Include = /etc/pacman.d/mirrorlist + +[core] +Include = /etc/pacman.d/mirrorlist + +[extra] +Include = /etc/pacman.d/mirrorlist + +#[community-testing] +#Include = /etc/pacman.d/mirrorlist + +[community] +Include = /etc/pacman.d/mirrorlist + +# The PCR (Parabola Community Repository) contains packages maintained by trusted +# members of the Parabola community. It also contains packages maintained by +# Parabola developers, but that the developer decided didn't belong in core/libre. + +#[pcr-testing] +#Include = /etc/pacman.d/mirrorlist + +[pcr] +Include = /etc/pacman.d/mirrorlist + +# If you want to run 32 bit applications on your x86_64 system, +# enable the libre-multilib, multilib and pcr-multilib repositories as required here. + +#[nonprism-multilib-testing] +#Include = /etc/pacman.d/mirrorlist + +#[nonprism-multilib] +#Include = /etc/pacman.d/mirrorlist + +#[libre-multilib-testing] +#Include = /etc/pacman.d/mirrorlist + +#[libre-multilib] +#Include = /etc/pacman.d/mirrorlist + +#[multilib-testing] +#Include = /etc/pacman.d/mirrorlist + +#[multilib] +#Include = /etc/pacman.d/mirrorlist + +#[pcr-multilib-testing] +#Include = /etc/pacman.d/mirrorlist + +#[pcr-multilib] +#Include = /etc/pacman.d/mirrorlist + +# Parabola also supports another community projects and personal repositories, to +# find them check out this wiki page: https://wiki.parabola.nu/Repositories + +# An example of a custom package repository. See the pacman manpage for +# tips on creating your own repositories. +#[custom] +#SigLevel = Optional TrustAll +#Server = file:///home/custompkgs + +Include = /etc/pacman.d/*.conf +#+end_src + +*** mirrorlist + +#+begin_src conf :tangle /sudo::/etc/pacman.d/mirrorlist :comments none +# Parabola GNU/Linux-libre - Last Updated: Wed Dec 20 02:59:35 GMT 2017 + +Server = http://mirror.fsf.org/parabola/$repo/os/$arch +Server = http://mirror.fsf.org/parabola/$repo/os/$arch +Server = http://mirror.fsf.org/parabola/$repo/os/$arch +Server = http://mirror.fsf.org/parabola/$repo/os/$arch + +# Location: London, UK +# Responsible: Parabola Project +# Note: Not really a mirror, automatically redirects you to an Arch +# mirror when possible. Works best specifying it a few times in a +# row (404s workaround). +# Server = http://redirector.parabola.nu/$repo/os/$arch +Server = https://redirector.parabola.nu/$repo/os/$arch + +# Location: Reykjavík, Iceland +# Responsible: Parabola Project +# Note: Not really a mirror, automatically redirects you to a Parabola +# mirror that has the file you are looking for. +# Server = http://repomirror.parabola.nu/$repo/os/$arch +Server = https://repomirror.parabola.nu/$repo/os/$arch + +# Location: Falkenstein, Germany +# Server = http://mirror.grapentin.org/parabola/$repo/os/$arch +Server = https://mirror.grapentin.org/parabola/$repo/os/$arch + +# Location: Volendam, Netherlands +Server = https://jeweet.net/repo/parabola/$repo/os/$arch + +# Location: Amsterdam, Netherlands +# Note: Not really a mirror, but a high-speed 10GiB cache for +# mirror.yandex.ru/mirrors/parabola +# Server = http://parabola.isacdaavid.info:8080/$repo/os/$arch +Server = https://parabola.isacdaavid.info:8081/$repo/os/$arch + +# Location: Moscow, Russian Federation +# Server = http://mirror.yandex.ru/mirrors/parabola/$repo/os/$arch +Server = https://mirror.yandex.ru/mirrors/parabola/$repo/os/$arch + +# Location: Ho Chi Minh City, Vietnam +# Server = http://mirror.freedif.org/Parabola/$repo/os/$arch +Server = https://mirror.freedif.org/Parabola/$repo/os/$arch + +# Location: Los Angeles, CA, USA +# Note: Also visit http://alfplayer.com/ for its SNAPSHOTS ARCHIVE +Server = http://alfplayer.com/parabola/$repo/os/$arch + +# Location: Boston, MA, USA +Server = http://mirror.fsf.org/parabola/$repo/os/$arch + +# Location: Austin, TX, USA +# Server = http://parabola.serverpit.com/ +Server = https://parabola.serverpit.com/ + +# Location: Reykjavík, Iceland +# Responsible: Parabola Project +# Note: Currently pointing to repomirror.parabola.nu +# Server = http://repo.parabola.nu/$repo/os/$arch +Server = https://repo.parabola.nu/$repo/os/$arch +#+end_src + ** pigeonhole *** amin.sieve :PROPERTIES: -:header-args+: :tangle ~/mail/aminb.org/amin/sieve/amin.sieve :comments none +:header-args+: :tangle ~/mail/bndl.org/amin/sieve/amin.sieve :comments none :END: #+begin_src conf @@ -2184,7 +2515,7 @@ include :personal "lists"; *** lists.sieve :PROPERTIES: -:header-args+: :tangle ~/mail/aminb.org/amin/sieve/lists.sieve :comments none +:header-args+: :tangle ~/mail/bndl.org/amin/sieve/lists.sieve :comments none :END: #+begin_src conf @@ -2410,7 +2741,7 @@ clip=primary # Options for generating new password entries # default_user is also used for password files that have no user field. default_user=aminb -default_user2=aminban +default_user2=bandali password_length=30 # Custom Keybindings @@ -2450,7 +2781,8 @@ set $left h set $down j set $up k set $right l -set $term urxvt +set $term alacritty +set $term2 urxvt set $menu rofi -show run -display-run '> ' -display-window ' 🗔 ' ### Output configuration @@ -2464,6 +2796,10 @@ output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill # # You can get the names of your outputs by running: swaymsg -t get_outputs +output DP-1 res 2560x1440 pos 0,0 +# 597 = (2560/2) - (1366/2) +output LVDS-1 pos 597,1440 + ### Idle configuration exec swayidle \ @@ -2476,9 +2812,8 @@ exec swayidle \ # Basics: # # start a terminal - bindsym $mod+Return exec $term -name floating - bindsym $mod+Shift+Return exec $term - for_window [class="URxvt" instance="floating"] floating enable + bindsym $mod+Return exec $term + bindsym $mod+Shift+Return exec $term2 # kill focused window bindsym $mod+Shift+q kill @@ -2694,6 +3029,19 @@ mode screenshot { bindsym q mode default } +# +# Window configurations +# +for_window [class="mpv"] floating enable +for_window [class="TelegramDesktop"] floating enable +for_window [app_id="pavucontrol"] floating enable +for_window [app_id="meld"] floating enable +for_window [app_id="nm-connection-editor"] floating enable + +set $blue #285577 +set $gray #1e1f21 +set $red #900000 + # # Status Bar: # @@ -2701,19 +3049,28 @@ mode screenshot { bar { position bottom colors { - statusline #ffffff - background #212121 - inactive_workspace #21212100 #21212100 #5c5c5c + background $gray + inactive_workspace $gray $gray #888888 + active_workspace $gray $gray #ffffff + urgent_workspace $red $red #ffffff + focused_workspace $blue $blue #ffffff } status_command i3status | my-i3status.py } +client.focused $blue $blue #ffffff $blue $blue +client.unfocused $gray $gray #ffffff $gray $gray +client.focused_inactive $gray $gray #ffffff $gray $gray + # font pango: benis uushi 9 # font pango: Ubuntu Mono 11 # font pango: Inconsolata 11 font pango: DejaVu Sans Mono 9 # font pango: Liberation Mono 9 +# get rid of title bars +default_border pixel 4 + exec xrdb .Xresources # exec pgrep -x "systemd-inhibit" || \ # systemd-inhibit --what=handle-power-key --who=aminb \ @@ -2748,6 +3105,11 @@ input "1:1:AT_Translated_Set_2_keyboard" { xkb_layout us_ab,ir xkb_options ctrl:nocaps,altwin:swap_alt_win,grp:shifts_toggle } + +input "65261:24672:technomancy_Atreus" { + repeat_delay 200 + repeat_rate 45 +} #+end_src *** shemshak @@ -2780,6 +3142,14 @@ input "1:1:AT_Translated_Set_2_keyboard" { image=/home/amin/usr/pics/wp/wp2445784-blurred-wallpapers.jpg scaling=fill #+end_src +** systemd + +Keep boot messages on tty1 (see [[https://wiki.archlinux.org/index.php/getty#Have_boot_messages_stay_on_tty1][here]]) + +#+begin_src conf :tangle /sudo::/etc/systemd/system/getty@tty1.service.d/noclear.conf +[Service] +TTYVTDisallocate=no +#+end_src ** TLP @@ -2788,33 +3158,43 @@ scaling=fill #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "langa")) "/sudo::/etc/default/tlp") # ------------------------------------------------------------------------------ # tlp - Parameters for power saving -# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html +# See full explanation: https://linrunner.de/en/tlp/docs/tlp-configuration.html -# Hint: some features are disabled by default, remove the leading # to enable -# them. +# Notes: +# - Some parameters are disabled, remove the leading '#' to enable # them; +# shown values are suggestions not defaults +# - Default *: intrinsic default that is effective when the parameter is missing +# or disabled by a leading '#'; use PARAM="" to disable intrinsic defaults for +# parameters with text string values +# - Default : do nothing or use kernel/hardware defaults # Set to 0 to disable, 1 to enable TLP. +# Default: 0 TLP_ENABLE=1 # Operation mode when no power supply can be detected: AC, BAT. # Concerns some desktop and embedded hardware only. +# Default: TLP_DEFAULT_MODE=AC # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC. +# Default: 0 TLP_PERSISTENT_DEFAULT=0 # Seconds laptop mode has to wait after the disk goes idle before doing a sync. # Non-zero value enables, zero disables laptop mode. +# Default: 0 (AC), 2 (BAT) DISK_IDLE_SECS_ON_AC=0 DISK_IDLE_SECS_ON_BAT=2 # Dirty page values (timeouts in secs). +# Default: 15 (AC + BAT) MAX_LOST_WORK_SECS_ON_AC=15 MAX_LOST_WORK_SECS_ON_BAT=60 -# Hint: CPU parameters below are disabled by default, remove the leading # -# to enable them, otherwise kernel default values are used. +# Note: CPU parameters below are disabled by default, remove the leading # +# to enable them, otherwise kernel defaults will be used. # Select a CPU frequency scaling governor. # Intel Core i processor with intel_pstate driver: @@ -2822,19 +3202,21 @@ MAX_LOST_WORK_SECS_ON_BAT=60 # Older hardware with acpi-cpufreq driver: # ondemand(*), powersave, performance, conservative, schedutil. # (*) is recommended. -# Hint: use tlp-stat -p to show the active driver and available governors. +# Use tlp-stat -p to show the active driver and available governors. # Important: # powersave for intel_pstate and ondemand for acpi-cpufreq are power # efficient for *almost all* workloads and therefore kernel and most # distributions have chosen them as defaults. If you still want to change, # you should know what you're doing! You *must* disable your distribution's # governor settings or conflicts will occur. +# Default: #CPU_SCALING_GOVERNOR_ON_AC=powersave #CPU_SCALING_GOVERNOR_ON_BAT=powersave # Set the min/max frequency available for the scaling governor. -# Possible values strongly depend on your CPU. For available frequencies see +# Possible values depend on your CPU. For available frequencies see # the output of tlp-stat -p. +# Default: #CPU_SCALING_MIN_FREQ_ON_AC=0 #CPU_SCALING_MAX_FREQ_ON_AC=0 #CPU_SCALING_MIN_FREQ_ON_BAT=0 @@ -2844,6 +3226,7 @@ MAX_LOST_WORK_SECS_ON_BAT=60 # performance, balance_performance, default, balance_power, power # Values are given in order of increasing power saving. # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required. +# Default: CPU_HWP_ON_AC=balance_performance CPU_HWP_ON_BAT=balance_power @@ -2851,6 +3234,7 @@ CPU_HWP_ON_BAT=balance_power # Limit the max/min P-state to control the power dissipation of the CPU. # Values are stated as a percentage of the available performance. # Requires an Intel Core i processor with intel_pstate driver. +# Default: #CPU_MIN_PERF_ON_AC=0 #CPU_MAX_PERF_ON_AC=100 #CPU_MIN_PERF_ON_BAT=0 @@ -2861,39 +3245,47 @@ CPU_HWP_ON_BAT=balance_power # Important: # - This may conflict with your distribution's governor settings # - A value of 1 does *not* activate boosting, it just allows it +# Default: #CPU_BOOST_ON_AC=1 #CPU_BOOST_ON_BAT=0 # Minimize number of used CPU cores/hyper-threads under light load conditions: # 0=disable, 1=enable. +# Default: SCHED_POWERSAVE_ON_AC=0 SCHED_POWERSAVE_ON_BAT=1 # Kernel NMI Watchdog: # 0=disable (default, saves power), 1=enable (for kernel debugging only). +# Default: NMI_WATCHDOG=0 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required. # Frequency voltage pairs are written to: # /sys/devices/system/cpu/cpu0/cpufreq/phc_controls # CAUTION: only use this, if you thoroughly understand what you are doing! +# Default: . #PHC_CONTROLS="F:V F:V F:V F:V" # Set CPU performance versus energy savings policy: # performance, balance-performance, default, balance-power, power. # Values are given in order of increasing power saving. # Requires kernel module msr and x86_energy_perf_policy from linux-tools. +# Default: ENERGY_PERF_POLICY_ON_AC=performance ENERGY_PERF_POLICY_ON_BAT=balance-power -# Disk devices; separate multiple devices with spaces (default: sda). +# Disk devices; separate multiple devices with spaces. # Devices can be specified by disk ID also (lookup with: tlp diskid). +# Note: DISK parameters below are effective only when this option is configured. +# Default: "nvme0n1 sda" DISK_DEVICES="sda sdb" # Disk advanced power management level: 1..254, 255 (max saving, min, off). # Levels 1..127 may spin down the disk; 255 allowable on most drives. # Separate values for multiple disks with spaces. Use the special value 'keep' # to keep the hardware default for the particular disk. +# Default: DISK_APM_LEVEL_ON_AC="254 254" DISK_APM_LEVEL_ON_BAT="128 128" @@ -2904,179 +3296,249 @@ DISK_APM_LEVEL_ON_BAT="128 128" # See 'man hdparm' for details. # Separate values for multiple disks with spaces. Use the special value 'keep' # to keep the hardware default for the particular disk. +# Default: #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0" #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0" -# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq). +# Select I/O scheduler for the disk devices. +# Multi queue (blk-mq) schedulers: +# mq-deadline(*), none, kyber, bfq +# Single queue schedulers: +# deadline(*), cfq, bfq, noop +# (*) recommended. # Separate values for multiple disks with spaces. Use the special value 'keep' # to keep the kernel default scheduler for the particular disk. -#DISK_IOSCHED="cfq cfq" +# Notes: +# - Multi queue (blk-mq) may need kernel boot option 'scsi_mod.use_blk_mq=1' +# and 'modprobe mq-deadline-iosched|kyber|bfq' on kernels < 5.0 +# - Single queue schedulers are legacy now and were removed together with +# the old block layer in kernel 5.0 +# Default: keep +#DISK_IOSCHED="mq-deadline mq-deadline" # AHCI link power management (ALPM) for disk devices: # min_power, med_power_with_dipm(*), medium_power, max_performance. # (*) Kernel >= 4.15 required, then recommended. # Multiple values separated with spaces are tried sequentially until success. +# Default: SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance" SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power" # Exclude host devices from AHCI link power management. # Separate multiple hosts with spaces. +# Default: #SATA_LINKPWR_BLACKLIST="host1" # Runtime Power Management for AHCI host and disks devices: # on=disable, auto=enable. -# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss. +# EXPERIMENTAL ** WARNING: auto may cause system lockups/data loss. +# Default: #AHCI_RUNTIME_PM_ON_AC=on #AHCI_RUNTIME_PM_ON_BAT=on # Seconds of inactivity before disk is suspended. +# Note: effective only when AHCI_RUNTIME_PM_ON_AC/BAT is activated. +# Default: 15 AHCI_RUNTIME_PM_TIMEOUT=15 # PCI Express Active State Power Management (PCIe ASPM): -# default, performance, powersave. -PCIE_ASPM_ON_AC=performance -PCIE_ASPM_ON_BAT=powersave +# default(*), performance, powersave. +# (*) keeps BIOS ASPM defaults (recommended) +# Default: +#PCIE_ASPM_ON_AC=default +#PCIE_ASPM_ON_BAT=default + +# Set the min/max/turbo frequency for the Intel GPU. +# Possible values depend on your hardware. For available frequencies see +# the output of tlp-stat -g. +# Default: +#INTEL_GPU_MIN_FREQ_ON_AC=0 +#INTEL_GPU_MIN_FREQ_ON_BAT=0 +#INTEL_GPU_MAX_FREQ_ON_AC=0 +#INTEL_GPU_MAX_FREQ_ON_BAT=0 +#INTEL_GPU_BOOST_FREQ_ON_AC=0 +#INTEL_GPU_BOOST_FREQ_ON_BAT=0 # Radeon graphics clock speed (profile method): low, mid, high, auto, default; -# auto = mid on BAT, high on AC; default = use hardware defaults. -RADEON_POWER_PROFILE_ON_AC=high -RADEON_POWER_PROFILE_ON_BAT=low +# auto = mid on BAT, high on AC. +# Default: default +RADEON_POWER_PROFILE_ON_AC=default +RADEON_POWER_PROFILE_ON_BAT=default # Radeon dynamic power management method (DPM): battery, performance. +# Default: RADEON_DPM_STATE_ON_AC=performance RADEON_DPM_STATE_ON_BAT=battery # Radeon DPM performance level: auto, low, high; auto is recommended. +# Note: effective only when RADEON_DPM_STATE_ON_AC/BAT is activated. +# Default: auto RADEON_DPM_PERF_LEVEL_ON_AC=auto RADEON_DPM_PERF_LEVEL_ON_BAT=auto # WiFi power saving mode: on=enable, off=disable; not supported by all adapters. +# Default: WIFI_PWR_ON_AC=off WIFI_PWR_ON_BAT=on # Disable wake on LAN: Y/N. +# Default: N WOL_DISABLE=Y # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs). # A value of 0 disables, >=1 enables power saving (recommended: 1). +# Default: SOUND_POWER_SAVE_ON_AC=0 SOUND_POWER_SAVE_ON_BAT=0 # Disable controller too (HDA only): Y/N. +# Note: effective only when SOUND_POWER_SAVE_ON_AC/BAT is activated. +# Default: Y SOUND_POWER_SAVE_CONTROLLER=N # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable. # Drive can be powered on again by releasing (and reinserting) the eject lever # or by pressing the disc eject button on newer models. # Note: an UltraBay/MediaBay hard disk is never powered off. +# Default: 0 BAY_POWEROFF_ON_AC=0 BAY_POWEROFF_ON_BAT=0 -# Optical drive device to power off (default sr0). +# Optical drive device to power off +# Default: sr0 BAY_DEVICE="sr0" # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable. +# Default: RUNTIME_PM_ON_AC=on RUNTIME_PM_ON_BAT=auto # Exclude PCI(e) device adresses the following list from Runtime PM # (separate with spaces). Use lspci to get the adresses (1st column). +# Default: #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6" # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM. # Default when unconfigured is "amdgpu nouveau nvidia radeon" which # prevents accidential power-on of dGPU in hybrid graphics setups. -# Use "" to disable the feature completely. # Separate multiple drivers with spaces. -#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon" +# Default: "amdgpu mei_me nouveau nvidia pcieport radeon", use "" to disable +# completely. +#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu mei_me nouveau nvidia pcieport radeon" # Set to 0 to disable, 1 to enable USB autosuspend feature. +# Default: 0 USB_AUTOSUSPEND=1 # Exclude listed devices from USB autosuspend (separate with spaces). # Use lsusb to get the ids. # Note: input devices (usbhid) are excluded automatically +# Default: #USB_BLACKLIST="1111:2222 3333:4444" # Bluetooth devices are excluded from USB autosuspend: # 0=do not exclude, 1=exclude. +# Default: 0 USB_BLACKLIST_BTUSB=0 # Phone devices are excluded from USB autosuspend: # 0=do not exclude, 1=exclude (enable charging). +# Default: 0 USB_BLACKLIST_PHONE=0 # Printers are excluded from USB autosuspend: # 0=do not exclude, 1=exclude. +# Default: 1 USB_BLACKLIST_PRINTER=1 # WWAN devices are excluded from USB autosuspend: # 0=do not exclude, 1=exclude. -USB_BLACKLIST_WWAN=1 +# Default: 0 +USB_BLACKLIST_WWAN=0 # Include listed devices into USB autosuspend even if already excluded -# by the blacklists above (separate with spaces). -# Use lsusb to get the ids. +# by the blacklists above (separate with spaces). Use lsusb to get the ids. +# Default: #USB_WHITELIST="1111:2222 3333:4444" # Set to 1 to disable autosuspend before shutdown, 0 to do nothing # (workaround for USB devices that cause shutdown problems). +# Default: 0 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown # on system startup: 0=disable, 1=enable. -# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below -# are ignored when this is enabled! +# Note: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below +# are ignored when this is enabled. +# Default: 0 #RESTORE_DEVICE_STATE_ON_STARTUP=0 -RESTORE_DEVICE_STATE_ON_STARTUP=0 +RESTORE_DEVICE_STATE_ON_STARTUP=1 # Radio devices to disable on startup: bluetooth, wifi, wwan. # Separate multiple devices with spaces. +# Default: #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan" -DEVICES_TO_DISABLE_ON_STARTUP="bluetooth" # Radio devices to enable on startup: bluetooth, wifi, wwan. # Separate multiple devices with spaces. +# Default: #DEVICES_TO_ENABLE_ON_STARTUP="wifi" # Radio devices to disable on shutdown: bluetooth, wifi, wwan. # (workaround for devices that are blocking shutdown). +# Default: #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan" # Radio devices to enable on shutdown: bluetooth, wifi, wwan. # (to prevent other operating systems from missing radios). +# Default: #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan" # Radio devices to enable on AC: bluetooth, wifi, wwan. +# Default: #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan" # Radio devices to disable on battery: bluetooth, wifi, wwan. +# Default: #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan" +DEVICES_TO_DISABLE_ON_BAT="bluetooth" # Radio devices to disable on battery when not in use (not connected): # bluetooth, wifi, wwan. +# Default: #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan" # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module # required). Charging starts when the remaining capacity falls below the # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value. # Main / Internal battery (values in %) +# Default: #START_CHARGE_THRESH_BAT0=75 #STOP_CHARGE_THRESH_BAT0=80 # Ultrabay / Slice / Replaceable battery (values in %) +# Default: #START_CHARGE_THRESH_BAT1=75 #STOP_CHARGE_THRESH_BAT1=80 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable. +# Default: 0 #RESTORE_THRESHOLDS_ON_BAT=1 +# Battery feature drivers: 0=disable, 1=enable +# Default: 1 (all) +NATACPI_ENABLE=1 +TPACPI_ENABLE=1 +TPSMAPI_ENABLE=1 + # ------------------------------------------------------------------------------ # tlp-rdw - Parameters for the radio device wizard # Possible devices: bluetooth, wifi, wwan. -# Hints: +# Notes: # - Parameters are disabled by default, remove the leading # to enable them # - Separate multiple radio devices with spaces +# Default: (for all parameters below) + # Radio devices to disable on connect. #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan" #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan" @@ -3836,8 +4298,6 @@ installed. :END: #+begin_src sh - - ################# # CORE SETTINGS # ################# @@ -3914,7 +4374,6 @@ ztermtitle='%n@%m:%~' #zhighlighters=(main brackets cursor) zhighlighters=(main brackets pattern) - # # SSH # @@ -3922,7 +4381,6 @@ zhighlighters=(main brackets pattern) # Load these ssh identities with the ssh module zssh_ids=(id_ed25519_bandali) - # # Pacman # @@ -3932,6 +4390,8 @@ zpacman_frontend='yay' # Load any helper scripts as defined here #zpacman_helper=(aur) + + #+end_src *** zlogin @@ -3940,14 +4400,13 @@ zpacman_frontend='yay' :END: #+begin_src sh - - # # User configuration sourced by login shells # # Initialize zim [[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh + #+end_src *** zprofile @@ -4029,7 +4488,7 @@ TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman # User configuration sourced by interactive shells # -# Change default zim location +# Define zim location export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim # Start zim @@ -4070,7 +4529,7 @@ alias mv="mv -iv" alias cp="cp -iv" alias scl=systemctl alias jcl=journalctl -alias m="mbsync uwaterloo; mbsync amin" +alias m="mbsync csclub; mbsync uwaterloo; mbsync amin" alias best="youtube-dl -f best" alias sd="ssh deb" alias sf="ssh fp" @@ -4085,6 +4544,7 @@ aur() { # i-beam cursor echo -e "\033[5 q" #echo -e "\033[6 q" + #+end_src * Scripts @@ -4194,7 +4654,7 @@ if __name__ == '__main__': if get_nosleep(): j = json.loads(line) # insert information into the start of the json, but could be anywhere - j.insert(0, {'full_text' : '🖵 ', 'name' : 'nosleep'}) + j.insert(0, {'full_text' : '•', 'name' : 'nosleep'}) # and echo back new encoded json print_line(prefix+json.dumps(j)) else: