X-Git-Url: https://git.shemshak.org/gitweb.cgi/~bandali/configs/blobdiff_plain/b5cb27fb0e0357f607c44b06a81c5674fbf3855f..c49fa11a90f9b17159062e3ab2f4a960f1048ffd:/rc.org
diff --git a/rc.org b/rc.org
index d4e8a7c..9d41443 100644
--- a/rc.org
+++ b/rc.org
@@ -1,5 +1,5 @@
#+title: rc.org
-#+property: header-args :comments link :mkdirp yes :results silent
+#+property: header-args :comments no :mkdirp yes :results silent
* About
@@ -12,629 +12,11 @@ Note: This file is best viewed inside Emacs with org mode.
* Configs
This section contains the configuration files (dotfiles) of various
-programs I use.
-
-** bspwm
-
-*** bspwmrc
-:PROPERTIES:
-:header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
-:END:
-
-#+begin_src sh :tangle no
-sxhkd &
-sh ~/.fehbg &
-xfce4-panel -d &
-compton &
-sleep 0.5 && pasystray --notify=all &
-
-bspc monitor -d I II III IV V VI VII VIII IX X
-#bspc monitor eDP-1 -d I II III IV V
-#bspc monitor HDMI-1 -d VI VII VIII IX X
-
-#bspc config border_width 2
-#bspc config window_gap 8
-bspc config window_gap 0
-
-bspc config bottom_padding 26
-
-bspc config split_ratio 0.52
-bspc config borderless_monocle true
-bspc config gapless_monocle true
-bspc config click_to_focus button1
-bspc config directional_focus_tightness low
-
-#bspc rule -a Firefox desktop='^1' follow=on
-bspc rule -a Nightly desktop='^1' follow=on
-bspc rule -a Emacs desktop='^2' state=tiled follow=on
-#bspc rule -a Chromium desktop='^4' follow=on
-bspc rule -a URxvt state=floating
-bspc rule -a URxvt:tiled state=tiled
-bspc rule -a Connman-gtk state=floating
-bspc rule -a Xfce4-panel state=floating
-bspc rule -a TelegramDesktop state=floating
-bspc rule -a Ec state=floating
-bspc rule -a Pavucontrol state=floating
-bspc rule -a Eog state=floating
-bspc rule -a Seahorse state=floating
-bspc rule -a mpv state=floating
-bspc rule -a Evince state=floating
-bspc rule -a Meld state=floating
-bspc rule -a Autokey-gtk state=floating
-bspc rule -a Mousepad state=floating
-bspc rule -a Wrapper-1.0 state=floating
-bspc rule -a File-roller state=floating
-bspc rule -a Gnome-disks state=floating
-bspc rule -a Termite state=floating
-bspc rule -a Termite:tiled state=tiled
-bspc rule -a Thunderbird:Calendar state=floating
-bspc rule -a Audacity state=floating
-bspc rule -a Proof state=floating # pvs x-show-proof
-bspc rule -a Nm-connection-editor state=floating
-bspc rule -a Wire state=floating
-bspc rule -a discord state=floating
-bspc rule -a X2goclient state=floating
-bspc rule -a SimpleScreenRecorder state=floating
-bspc rule -a Gimp state=floating
-bspc rule -a Wrapper-2.0 state=floating
-bspc rule -a Zathura state=tiled
-#+end_src
-
-*** sxhkdrc
-:PROPERTIES:
-:header-args+: :tangle ~/.config/sxhkd/sxhkdrc
-:END:
-
-#+begin_src conf :tangle no
-#
-# wm independent hotkeys
-#
-
-# terminal emulator
-super + {_,shift} + Return
- urxvt{_, -name tiled}
-
-#super + {_,shift} + Return
-# termite{_, --name=tiled}
-
-# program launcher
-super + space
- rofi -show run -display-run '> ' -display-window ' ð '
-
-super + alt + space
- xfce4-popup-whiskermenu
-
-# window finder
-super + backslash
- rofi -show window -display-run '> ' -display-window ' ð '
-
-# password manager
-alt + space
- rofi-pass
-
-# firefox
-#super + r
-# firefox
-
-# chromium
-#super + c
-# chromium -incognito
-
-# emacs
-super + e
- emacs
-
-# make sxhkd reload its configuration files:
-super + Escape
- pkill -USR1 -x sxhkd
-
-# volume {up,down}
-XF86Audio{Raise,Lower}Volume
- pamixer --allow-boost --{in,de}crease 5
-
-# mute
-XF86AudioMute
- pamixer --toggle-mute
-
-XF86AudioMicMute
- pactl set-source-mute 1 toggle
-
-# playback control
-XF86Audio{Play,Prev,Next}
- mpc {toggle,prev,next}
-
-# lock the screen
-super + shift + q
- light-locker-command -l
-
-# Toggle keyboard layout
-super + F7
- toggle-layout
-
-# Toggle Xfce presentation mode
-XF86LaunchB
- toggle-presentation-mode
-
-# monitor brightness
-XF86MonBrightness{Up,Down}
- light -{A,U} 5
-
-super + apostrophe
- rofi-light
-
-# keyboard brightness
-#XF86KbdBrightness{Up,Down}
-# kbdlight {up,down}
-
-XF86RotateWindows
- toggle-tablet
-
-#
-# bspwm hotkeys
-#
-
-# quit bspwm normally
-super + alt + Escape
- bspc quit
-
-# close and kill
-super + {w,q}
- bspc node -{c,k}
-
-# alternate between the tiled and monocle layout
-super + m
- bspc desktop -l next
-
-# send the newest marked node to the newest preselected node
-super + y
- bspc node newest.marked.local -n newest.!automatic.local
-
-# swap the current node and the biggest node
-super + g
- bspc node -s biggest
-
-#
-# state/flags
-#
-
-# set the window state
-super + {t,shift + t,s,f}
- bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
-
-# set the node flags
-super + ctrl + {m,x,y,z}
- bspc node -g {marked,locked,sticky,private}
-
-#
-# focus/swap
-#
-
-# focus the node in the given direction
-super + {_,shift + }{h,j,k,l}
- bspc node -{f,s} {west,south,north,east}
-
-# focus the node for the given path jump
-super + {p,b,comma,period}
- bspc node -f @{parent,brother,first,second}
-
-# focus the next/previous node in the current desktop
-super + {_,shift + }c
- bspc node -f {next,prev}.local
-
-# focus the next/previous desktop in the current monitor
-super + bracket{left,right}
- bspc desktop -f {prev,next}.local
-
-# send to next/prev desktop
-super + shift + bracket{left,right}
- bspc node -d {prev,next} --follow
-
-# focus the last node/desktop
-super + {grave,Tab}
- bspc {node,desktop} -f last
-
-# focus the older or newer node in the focus history
-super + {o,i}
- bspc wm -h off; \
- bspc node {older,newer} -f; \
- bspc wm -h on
-
-# focus or send to the given desktop
-super + {_,shift + }{1-9,0}
- bspc {desktop -f,node -d} '^{1-9,10}'
-
-#
-# preselect
-#
-
-# preselect the direction
-super + ctrl + {h,j,k,l}
- bspc node -p {west,south,north,east}
-
-# preselect the ratio
-super + ctrl + {1-9}
- bspc node -o 0.{1-9}
-
-# cancel the preselection for the focused node
-super + ctrl + space
- bspc node -p cancel
-
-# cancel the preselection for the focused desktop
-super + ctrl + shift + space
- bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
-
-#
-# move/resize
-#
-
-# expand a window by moving one of its side outward
-super + alt + {h,j,k,l}
- bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
-
-# contract a window by moving one of its side inward
-super + alt + shift + {h,j,k,l}
- bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
-
-# move a floating window
-super + {Left,Down,Up,Right}
- bspc node -v {-20 0,0 20,0 -20,20 0}
-
-#alt + bracket{left,right}
-# xdotool key --clearmodifiers ctrl+Page_{Up,Down}
-#+end_src
-
-** compton
-:PROPERTIES:
-:header-args+: :tangle ~/.config/compton.conf
-:END:
-
-#+begin_src conf :tangle no
-# Shadow
-shadow = false; # Enabled client-side shadows on windows.
-no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows.
-no-dnd-shadow = true; # Don't draw shadows on DND windows.
-clear-shadow = true; # Zero the part of the shadow's mask behind the
- # window. Fix some weirdness with ARGB windows.
-shadow-radius = 5; # The blur radius for shadows. (default 12)
-shadow-offset-x = -5; # The left offset for shadows. (default -15)
-shadow-offset-y = -5; # The top offset for shadows. (default -15)
-# shadow-opacity = 0.7; # The translucency for shadows. (default .75)
-# shadow-red = 0.0; # Red color value of shadow. (0.0 - 1.0, defaults to 0)
-# shadow-green = 0.0; # Green color value of shadow. (0.0 - 1.0, defaults to 0)
-# shadow-blue = 0.0; # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
-shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ]; # Exclude conditions for shadows.
-# shadow-exclude = "n:e:Notification";
-#shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
-shadow-ignore-shaped = true; # Avoid drawing shadow on all shaped windows
- # (see also: --detect-rounded-corners)
-
-# Opacity
-menu-opacity = 1.0; # The opacity for menus. (default 1.0)
-#inactive-opacity = 0.9; # Default opacity of inactive windows. (0.0 - 1.0)
-# active-opacity = 0.8; # Default opacity for active windows. (0.0 - 1.0)
-frame-opacity = 1.0; # Opacity of window titlebars and borders. (0.1 - 1.0)
-# inactive-opacity-override = true; # Let inactive opacity set by 'inactive-opacity' overrides
- # value of _NET_WM_OPACITY. Bad choice.
-alpha-step = 0.06; # XRender backend: Step size for alpha pictures. Increasing
- # it may result in less X resource usage,
- # Yet fading may look bad.
-#inactive-dim = 0.5; # Dim inactive windows. (0.0 - 1.0)
-#inactive-dim-fixed = true; # Do not let dimness adjust based on window opacity.
-# blur-background = true; # Blur background of transparent windows.
- # Bad performance with X Render backend.
- # GLX backend is preferred.
-# blur-background-frame = true; # Blur background of opaque windows with transparent
- # frames as well.
-blur-background-fixed = true; # Do not let blur radius adjust based on window opacity.
-blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
- # Exclude conditions for background blur.
-
-# Fading
-fading = false; # Fade windows during opacity changes.
-fade-delta = 3; # The time between steps in a fade in milliseconds. (default 10).
-fade-in-step = 0.03; # Opacity change between steps while fading in. (default 0.028).
-fade-out-step = 0.03; # Opacity change between steps while fading out. (default 0.03).
-# no-fading-openclose = true; # Avoid fade windows in/out when opening/closing.
-fade-exclude = [ ]; # Exclude conditions for fading.
-
-# Other
-backend = "glx" # Backend to use: "xrender" or "glx". GLX backend is typically
- # much faster but depends on a sane driver.
-mark-wmwin-focused = true; # Try to detect WM windows and mark them as active.
-mark-ovredir-focused = true; # Mark all non-WM but override-redirect windows active (e.g. menus).
-use-ewmh-active-win = true; # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
- # instead of using FocusIn/Out events. Usually more reliable but
- # depends on a EWMH-compliant WM.
-detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
-detect-client-opacity = true; # Detect _NET_WM_OPACITY on client windows, useful for window
- # managers not passing _NET_WM_OPACITY of client windows to frame
- # windows.
-refresh-rate = 0; # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
-vsync = "drm"; # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
- # See man page for more details.
-dbe = false; # Enable DBE painting mode. Rarely needed.
-paint-on-overlay = true; # Painting on X Composite overlay window. Recommended.
-sw-opti = false; # Limit compton to repaint at most once every 1 / refresh_rate.
- # Incompatible with certain VSync methods.
-unredir-if-possible = false; # Unredirect all windows if a full-screen opaque window is
- # detected, to maximize performance for full-screen windows.
-focus-exclude = [ ]; # A list of conditions of windows that should always be considered
- # focused.
-detect-transient = true; # Use WM_TRANSIENT_FOR to group windows, and consider windows in
- # the same group focused at the same time.
-detect-client-leader = true; # Use WM_CLIENT_LEADER to group windows.
-invert-color-include = [ ]; # Conditions for windows to be painted with inverted color.
-
-# GLX backend # GLX backend fine-tune options. See man page for more info.
-glx-no-stencil = true; # Recommended.
-glx-copy-from-front = false; # Useful with --glx-swap-method,
-# glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
-# glx-no-rebind-pixmap = true; # Recommended if it works.
-glx-no-rebind-pixmap = true; # Recommended if it works.
-#glx-swap-method = "4"; # See man page.
-glx-swap-method = "4"; # See man page.
-
-# Window type settings
-wintypes:
-{
- tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
- menu = { shadow = false; };
- dropdown_menu = { shadow = false; };
- popup_menu = { shadow = false; };
- utility = { shadow = false; };
- # fade: Fade the particular type of windows.
- # shadow: Give those windows shadow
- # opacity: Default opacity for the type of windows.
- # focus: Whether to always consider windows of this type focused.
-};
-#+end_src
-
-** dovecot
-:PROPERTIES:
-:header-args+: :tangle "/sudo::/etc/dovecot/dovecot.conf"
-:END:
-
-#+begin_src conf
-protocols = imap
-
-listen = 127.0.0.1
-log_path = /var/log/dovecot.log
-info_log_path = /var/log/dovecot-info.log
-
-ssl = no
-disable_plaintext_auth = no
-
-auth_verbose = yes
-auth_mechanisms = plain
-
-passdb {
- driver = passwd-file
- args = /etc/dovecot/passwd
-}
-
-userdb {
- driver = static
- args = uid=amin gid=amin home=/home/amin/mail/%d/%n
- default_fields = mail=maildir:/home/amin/mail/%d/%n/mail
-}
-
-# mail_home = /home/amin/mail/%d/%n
-# mail_location = maildir:/home/amin/mail/%d/%n/mail:LAYOUT=fs:INBOX=/home/amin/mail/%d/%n/mail/Inbox
-
-# namespace {
-# inbox = yes
-# separator = /
-# }
-
-mail_plugins = $mail_plugins fts fts_lucene
-
-plugin {
- fts = lucene
- fts_lucene = whitespace_chars=@.
- fts_autoindex = yes
-}
-#+end_src
-
-** Dunst
-:PROPERTIES:
-:header-args+: :tangle ~/.config/dunst/dunstrc
-:END:
-
-#+begin_src conf
-[global]
-#font = Ubuntu Mono 10.5
-font = Inconsolata 11
-
-# Path to default icons.
-icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
-
-icon_position = left
-# bold
-# italic
-# strikethrough
-# underline
-markup = full
-# The format of the message. Possible variables are:
-# %a appname
-# %s summary
-# %b body
-# %i iconname (including its path)
-# %I iconname (without its path)
-# %p progress value if set ([ 0%] to [100%]) or nothing
-# Markup is allowed
-format = "%s\n%b"
-# Sort messages by urgency
-sort = yes
-# Show how many messages are currently hidden (because of geometry)
-indicate_hiddenl= no
-# Alignment of message text.
-# Possible values are "left", "center" and "right"
-alignment = center
-# The frequency with wich text that is longer than the notification
-# window allows bounces back and forth.
-# This option conflicts with 'word_wrap'.
-# Set to 0 to disable
-bounce_freq = 3
-# show age of message if message is older than show_age_threshold seconds.
-# set to -1 to disable
-show_age_threshold = -1
-# split notifications into multiple lines if they don't fit into geometry
-word_wrap = yes
-# ignore newlines '\n' in notifications
-ignore_newline = no
-# The geometry of the message window.
-# geometry [{width}]x{height}][+/-{x}+/-{y}]
-# The height is measured in number of notifications everything else in pixels. If the width
-# is omitted but the height is given ("-geometry x2"), the message window
-# expands over the whole screen (dmenu-like). If width is 0,
-# the window expands to the longest message displayed.
-# A positive x is measured from the left, a negative from the
-# right side of the screen. Y is measured from the top and down respectevly.
-# The width can be negative. In this case the actual width is the
-# screen width minus the width defined in within the geometry option.
-#geometry = "410x12-12+12"
-#geometry = "0x0-30-30"
-geometry = "260x12-30-30"
-# The transparency of the window. range: [0; 100]
-# This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
-transparency = 0
-# Don't remove messages, if the user is idle (no mouse or keyboard input)
-# for longer than idle_threshold seconds.
-# Set to 0 to disable.
-idle_threshold = 120
-# Which monitor should the notifications be displayed on.
-monitor = 0
-# Display notification on focused monitor. Possible modes are:
-# mouse: follow mouse pointer
-# keyboard: follow window with keyboard focus
-# none: don't follow anything
-#
-# "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
-# This should be the case for almost all modern windowmanagers.
-#
-# If this option is set to mouse or keyboard, the monitor option will be
-# ignored.
-follow = keyboard
-# should a notification popped up from history be sticky or
-# timeout as if it would normally do.
-sticky_history = yes
-# The height of a single line. If the height is smaller than the font height,
-# it will get raised to the font height.
-# This adds empty space above and under the text.
-line_height = 0
-
-show_indicators = yes
-
-# Draw a line of 'separatpr_height' pixel height between two notifications.
-# Set to 0 to disable
-separator_height = 3
-# padding between text and separator
-padding = 8
-# horizontal padding
-horizontal_padding = 8
-# Define a color for the separator.
-# possible values are:
-# * auto: dunst tries to find a color fitting to the background
-# * foreground: use the same color as the foreground
-# * frame: use the same color as the frame.
-# * anything else will be interpreted as a X color
-separator_color = foreground
-# print a notification on startup
-# This is mainly for error detection, since dbus (re-)starts dunst
-# automatically after a crash.
-startup_notification = false
-# dmenu path
-#dmenu = /usr/bin/dmenu -p dunst:
-dmenu = /usr/bin/rofi -dmenu -p dunst:
-# browser for opening urls in context menu
-browser = /usr/bin/firefox -new-tab
-[frame]
-width = 0
-color = "#377222"
-[shortcuts]
-# shortcuts are specified as [modifier+][modifier+]...key
-# available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
-# and 'mod4' (windows-key)
-# xev might be helpful to find names for keys
-# close notification
-close = ctrl+space
-# close all notifications
-close_all = ctrl+shift+space
-# redisplay last message(s)
-# On the US keyboard layout 'grave' is normally above TAB and left of '1'.
-history = ctrl+shift+h
-# context menu
-context = ctrl+shift+period
-[urgency_low]
-# IMPORTANT: colors have to be defined in quotation marks.
-# Otherwise the '#' and following would be interpreted as a comment.
-background = "#1d2a30"
-foreground = "#71c2af"
-timeout = 3
-[urgency_normal]
-background = "#1d2a30"
-foreground = "#71c2af"
-timeout = 0
-[urgency_critical]
-background = "#1d2a30"
-foreground = "#ff9982"
-timeout = 0
-
-# Every section that isn't one of the above is interpreted as a rules
-# to override settings for certain messages.
-# Messages can be matched by 'appname', 'summary', 'body' or 'icon'
-# and you can override the 'timeout', 'urgency', 'foreground', 'background'
-# and 'format'.
-# Shell-like globbing will get expanded.
-#
-# SCRIPTING
-# you can specify a script that gets run when the rule matches by setting
-# the 'script' option.
-# The script will be called as follows:
-# script appname summary body icon urgency
-# where urgency can be "LOW", "NORMAL" or "CRITICAL".
-#
-# NOTE: if you don't want a notification to be displayed, set the format to ""
-# NOTE: It might be helpful to run dunst -print in a terminal in order to find
-# fitting options for rules.
-#[espeak]
-# summary = "*"
-# script = dunst_espeak.sh
-#[script-test]
-# summary = "*script*"
-# script = dunst_test.sh
-#[ignore]
-## This notification will not be displayed
-# summary = "foobar"
-# format = ""
-#[signed_on]
-# appname = Pidgin
-# summary = "*signed on*"
-# urgency = low
-#
-#[signed_off]
-# appname = Pidgin
-# summary = *signed off*
-# urgency = low
-#
-#[says]
-# appname = Pidgin
-# summary = *says*
-# urgency = critical
-#
-#[twitter]
-# appname = Pidgin
-# summary = *twitter.com*
-# urgency = normal
-#
-[xfpm-backlight]
- summary = *Brightness*
- urgency = low
-#+end_src
+programs I use besides GNU Emacs.
** Fontconfig
:PROPERTIES:
-:header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
+:header-args+: :tangle ~/.config/fontconfig/fonts.conf
:END:
#+begin_src xml
@@ -679,10 +61,8 @@ timeout = 0
#+end_src
** getmail
-
-*** getmailrc
:PROPERTIES:
-:header-args+: :tangle ~/.getmail/getmailrc
+:header-args+: :tangle ~/.config/getmail/getmailrc
:END:
#+begin_src conf
@@ -690,153 +70,106 @@ timeout = 0
type = SimplePOP3SSLRetriever
server = fencepost.gnu.org
username = bandali
-password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
+password_command = ("gpg", "--no-tty", "-q", "-d", "/home/bandali/.passwd/gnu.gpg")
port = 995
use_apop = True
[destination]
type = Maildir
-path = ~/mail/gnu/Inbox/
-
-[options]
-delete = True
-#+end_src
-
-*** getmail.service
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/getmail.service
-:END:
-
-#+begin_src conf :tangle no
-[Unit]
-Description=getmail service
-
-[Service]
-Type=oneshot
-ExecStart=/usr/bin/getmail
-StandardOutput=syslog
-StandardError=syslog
-#+end_src
-
-*** getmail.timer
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/getmail.timer
-:END:
+path = ~/mail/gnu.local/bandali/mail/
-#+begin_src conf :tangle no
-[Unit]
-Description=getmail timer
+# [destination]
+# type = MDA_external
+# path = /usr/lib/dovecot/deliver
+# arguments = ('-e', '-f', '%(sender)', '-d', 'bandali@gnu.local')
-[Timer]
-OnCalendar=*:0/30
-Persistent=true
-Unit=getmail.service
-
-[Install]
-WantedBy=timers.target
+[options]
+read_all = false
+delete_after = 1
+# delete = true
+received = false
+delivered_to = false
#+end_src
** Git
-*** gitconfig
+*** config
:PROPERTIES:
-:header-args+: :tangle ~/.gitconfig
+:header-args+: :tangle ~/.config/git/config
:END:
-**** user
#+begin_src conf
[user]
- name = Amin Bandali
- email = bandali@gnu.org
- signingkey = BE6273738E616D6D1B3A08E8A21A020248816103
-#+end_src
+ name = Amin Bandali
+ email = bandali@gnu.org
+ signingkey = BE6273738E616D6D1B3A08E8A21A020248816103
-**** signing
-#+begin_src conf
[commit]
- gpgsign = true
+ gpgsign = true
+
# [format]
-# signoff = true
-#+end_src
+# signoff = true
-**** core
-#+begin_src conf
[core]
- autocrlf = input # CRLF -> LF on commit
- editor = emacsclient -t
- excludesfile = ~/.gitignore_global
- pager = "less"
-#+end_src
+ autocrlf = input # CRLF -> LF on commit
+ editor = emacsclient -t
+ pager = "less"
-**** gpg
-#+begin_src conf
-[gpg]
- program = gpg2
-#+end_src
+[mailmap]
+ file = ~/.config/git/mailmap
-**** alias
-#+begin_src conf
[alias]
- git = !exec git # handle nested git calls, e.g. git git status
- aliases = config --get-regexp '^alias\\.'
- a = add
- s = status
- sl = status --long
- c = checkout
- cb = checkout -b
- b = branch
- r = rebase
- p = pull
- pr = pull --rebase
- ps = push
- psf = push --force
- nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f"
- nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f"
-#+end_src
+ git = !exec git # handle nested git calls, e.g. git git status
+ aliases = config --get-regexp '^alias\\.'
+ a = add
+ s = status
+ sl = status --long
+ c = checkout
+ cb = checkout -b
+ b = branch
+ r = rebase
+ p = pull
+ pr = pull --rebase
+ ps = push
+ psf = push --force
+ nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f"
+ nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f"
-**** color
-#+begin_src conf
[color]
- ui = auto
+ ui = auto
[color "status"]
- added = green bold
- changed = red bold
- untracked = red bold
+ added = green bold
+ changed = red bold
+ untracked = red bold
[color "branch"]
- current = green bold
- remote = magenta bold
+ current = green bold
+ remote = magenta bold
[color "diff"]
- new = green bold
- old = red bold
-#+end_src
+ new = green bold
+ old = red bold
-**** status
-#+begin_src conf
-[status]
- # showUntrackedFiles = all
- short=true
- branch=true
-#+end_src
+# [status]
+# # showUntrackedFiles = all
+# short=true
+# branch=true
-**** github
-#+begin_src conf
[github]
- user = aminb
-#+end_src
+ user = notbandali
-**** send-email
-#+begin_src conf
[sendemail]
smtpuser = bandali
smtpserver = fencepost.gnu.org
smtpserverport = 587
smtpencryption = tls
annotate = yes
+
+[transfer]
+ fsckObjects = true
#+end_src
-*** gitignore
+*** ignore
:PROPERTIES:
-:header-args+: :tangle ~/.gitignore_global
+:header-args+: :tangle ~/.config/git/ignore
:END:
#+begin_src conf
@@ -847,6 +180,20 @@ WantedBy=timers.target
.DS_Store
*.elc
*-autoloads.el
+TAGS
+#+end_src
+
+*** mailmap
+:PROPERTIES:
+:header-args+: :tangle ~/.config/git/mailmap
+:END:
+
+#+begin_src conf
+
+
+
+
+
#+end_src
** GnuPG
@@ -856,179 +203,345 @@ WantedBy=timers.target
#+begin_src conf
default-cache-ttl 43200
-max-cache-ttl 43200
+max-cache-ttl 86400
-default-cache-ttl-ssh 10800
-max-cache-ttl-ssh 10800
+default-cache-ttl-ssh 43200
+max-cache-ttl-ssh 86400
-# pinentry-program /usr/bin/pinentry-qt
+pinentry-program /home/bandali/.guix-profile/bin/pinentry-emacs
+allow-emacs-pinentry
+allow-loopback-pinentry
#+end_src
** GTK
-*** gtk-2.0
+*** GTK+ 2
:PROPERTIES:
:header-args+: :tangle ~/.gtkrc-2.0
:END:
#+begin_src conf
-gtk-theme-name="Greybird"
-gtk-icon-theme-name="Paper"
-gtk-font-name="Ubuntu 10"
+gtk-theme-name="Xfce"
+# gtk-icon-theme-name="elementary Xfce darker"
+gtk-font-name="Roboto 10"
+# gtk-font-name="Source Code Variable 10"
gtk-menu-images=0
# gtk-key-theme-name = "Emacs"
#+end_src
-*** gtk-3.0
+*** GTK+ 3
:PROPERTIES:
:header-args+: :tangle ~/.config/gtk-3.0/settings.ini
:END:
-#+begin_src conf :tangle no
+#+begin_src conf
[Settings]
-gtk-icon-theme-name = Paper
+gtk-icon-theme-name = Adwaita
# gtk-theme-name = Adwaita
-gtk-theme-name = Greybird
+gtk-theme-name = Xfce
# gtk-theme-name = Arc-Darker
# gtk-theme-name = Numix-ArchBlue
-gtk-font-name = Ubuntu 10
+gtk-font-name = Roboto 10
+# gtk-font-name = Source Code Variable Medium 10
# gtk-key-theme-name = Emacs
#+end_src
-** [[https://github.com/Leinnan/i3gs][i3gs]]
-:PROPERTIES:
-:header-args+: :tangle ~/.config/i3gs/config
-:END:
-
-#+begin_src conf :comments none :tangle no
-borders_width=0 0 2 0
-separator_width=10
-
-#[mpd]
-#preset=MPD
-#title= ï
-#borders_color=#7FDBFF
-
-[ram]
-preset=RAM
-title= ï¾
-borders_color=#3D9970
-
-#[cpu]
-#preset=CPU
-#title= ï¤
-#borders_color=#2ECC40
-
-#[hdd]
-#preset=HDD
-#title= ï
-#borders_color=#01FF70
-
-[volume]
-command=volume-info
-title=ï§
-borders_color=#7FDBFF
-
-[battery]
-preset=BAT
-command=battery-percentage-time
-title= ï
-borders_color=#39CCCC
-
-[wifi]
-preset=WIFI
-title= ï«
-borders_color=#01FF70
-
-[date]
-preset=DATE
-command=date '+%-I:%M, %a %b %d '
-title= ï
-borders_color=#FFDC00
-separator_width=0
-#+end_src
-
-** i3status
-:PROPERTIES:
-:header-args+: :tangle ~/.config/i3status/config
-:END:
-
-#+begin_src conf :comments none
-# i3status configuration file.
-# see "man i3status" for documentation.
-
-# It is important that this file is edited as UTF-8.
-# The following line should contain a sharp s:
-# Ã
-# If the above line is not correctly displayed, fix your editor first!
-
-general {
- colors = true
- interval = 5
- output_format = "i3bar"
-}
-
-# order += "ipv6"
-order += "disk /"
-order += "disk /data"
-order += "wireless _first_"
-order += "ethernet _first_"
-order += "battery 0"
-order += "volume master"
-order += "load"
-order += "tztime local"
-
-wireless _first_ {
- format_up = "W:%quality %essid %ip"
- format_down = "W: down"
-}
-
-ethernet _first_ {
- # if you use %speed, i3status requires root privileges
- format_up = "E: %ip (%speed)"
- format_down = "E: down"
-}
-
-battery 0 {
- format = "%status %percentage %remaining (%consumption)"
- path = "/sys/class/power_supply/BAT%d/uevent"
- low_threshold = "10"
- threshold_type = "percentage"
- last_full_capacity = true
- integer_battery_capacity = true
- hide_seconds = true
-}
-
-tztime local {
- format = "%-I:%M%P %a %b %d"
-}
-
-volume master {
- format = "⪠%volume"
- format_muted = "ð %volume"
- device = "pulse"
-}
-
-load {
- format = "%1min"
-}
-
-disk "/" {
- format = "/ %avail"
-}
-
-disk "/data" {
- format = "/data %avail"
-}
+** Guix
+
+*** Channels
+:PROPERTIES:
+:header-args+: :tangle ~/.config/guix/channels.scm
+:END:
+
+#+begin_src scheme
+(list (channel
+ (name 'guix) ; https://git.savannah.gnu.org/git/guix.git
+ (url "file:///home/bandali/src/git/guix"))
+ (channel
+ (name 'guix-bandali) ; https://git.sr.ht/~bandali/guix-bandali
+ (url "file:///home/bandali/src/git/guix-bandali")))
+#+end_src
+
+*** Profile manifests
+
+To install/update the packages of the default profile, use
+#+begin_example
+guix package -m $MY_GUIX_MANIFESTS/main.scm
+#+end_example
+and for other profiles, use
+#+begin_example
+guix package -m $MY_GUIX_MANIFESTS/name.scm -p $MY_GUIX_PROFILES/name/name
+#+end_example
+where =name= is the name of the profile (e.g. =doc=, =media=, ...).
+
+**** doc
+:PROPERTIES:
+:header-args+: :tangle ~/.config/guix/manifest/doc.scm
+:END:
+
+#+begin_src scheme
+(specifications->manifest
+ '("libreoffice"
+ "texlive-amsfonts"
+ "texlive-base"
+ "texlive-latex-listings"
+ ;; "texlive-palatino"
+ "texlive-xcolor"
+))
+#+end_src
+
+**** main
+:PROPERTIES:
+:header-args+: :tangle ~/.config/guix/manifest/main.scm
+:END:
+
+#+begin_src scheme
+(specifications->manifest
+ '("alsa-utils"
+ "bash-completion"
+ "cpufrequtils"
+ "cpupower"
+ "cvs"
+ "dunst"
+ "emacs"
+ "emacs-alert"
+ "emacs-amx"
+ "emacs-async"
+ "emacs-biblio-git"
+ "emacs-boxquote"
+ "emacs-company"
+ "emacs-company-ebdb"
+ "emacs-crux"
+ "emacs-dash"
+ "emacs-debbugs"
+ "emacs-diff-hl"
+ "emacs-dmenu"
+ "emacs-doom-themes"
+ "emacs-ebdb"
+ "emacs-emmet-mode"
+ ;; "emacs-emojify"
+ "emacs-erc-hl-nicks"
+ "emacs-erc-scrolltoplace"
+ "emacs-eshell-up"
+ "emacs-exec-path-from-shell"
+ "emacs-expand-region"
+ "emacs-exwm"
+ "emacs-exwm-edit"
+ "emacs-flycheck"
+ "emacs-geiser"
+ ;; "emacs-gnus-harvest"
+ "emacs-guix"
+ "emacs-helpful"
+ "emacs-hl-todo"
+ "emacs-ivy"
+ "emacs-magit"
+ "emacs-message-x"
+ "emacs-minions"
+ ;; "emacs-multi-term"
+ "emacs-multiple-cursors"
+ "emacs-mwim"
+ ;; "emacs-next"
+ ;; "emacs-next-delight"
+ "emacs-no-littering"
+ "emacs-org"
+ "emacs-org-contrib"
+ "emacs-org-ref"
+ "emacs-orgalist"
+ "emacs-page-break-lines"
+ "emacs-pass"
+ "emacs-pinentry"
+ "emacs-projectile"
+ "emacs-shrink-path-git"
+ "emacs-smart-mode-line"
+ "emacs-typo"
+ "emacs-unkillable-scratch"
+ "emacs-use-package"
+ "emacs-web-mode"
+ "emacs-which-key"
+ "emacs-yasnippet"
+ "emacs-znc-git"
+ "font-adobe-source-code-pro"
+ "font-gnu-freefont-ttf"
+ "font-google-roboto"
+ "font-liberation"
+ "font-linuxlibertine"
+ "font-sil-gentium"
+ "font-tex-gyre"
+ ;; "font-ubuntu"
+ "font-vazir"
+ "getmail"
+ "gettext"
+ "git"
+ "git:send-email"
+ "gnupg"
+ "guile"
+ "haunt"
+ "htop"
+ "hunspell"
+ "hunspell-dict-en-ca"
+ "hunspell-dict-en-us"
+ "isync"
+ "light"
+ "msmtp"
+ "ncdu"
+ "notmuch"
+ "openjdk"
+ "openssh"
+ "openssl"
+ "pass-otp"
+ "password-store"
+ "pasystray"
+ "pinentry-emacs"
+ "poppler" ; for 'pdffonts'
+ "rofi"
+ "rofi-pass"
+ "rsync"
+ "rxvt-unicode"
+ "screen"
+ "scrot"
+ "setxkbmap"
+ "strace"
+ "thinkfan"
+ "unzip"
+ "wget"
+ "xdg-user-dirs"
+ ;; "xkbcomp"
+ "xmodmap"
+ "xrdb"
+ "xset"
+ "xsetroot"))
+#+end_src
+
+**** media
+:PROPERTIES:
+:header-args+: :tangle ~/.config/guix/manifest/media.scm
+:END:
+
+#+begin_src scheme
+(specifications->manifest
+ '("audacity"
+ "gimp"
+ "inkscape"
+ "mpv"
+ "youtube-dl"))
+#+end_src
+
+**** web
+:PROPERTIES:
+:header-args+: :tangle ~/.config/guix/manifest/web.scm
+:END:
+
+#+begin_src scheme
+(specifications->manifest
+ '("icecat"
+ "rtv"))
+#+end_src
+
+*** Systems
+
+**** chaman
+:PROPERTIES:
+:header-args+: :tangle ~/.config/guix/system/chaman.scm
+:END:
+
+#+begin_src scheme
+(use-modules (gnu)
+ (gnu packages certs) ; for nss-certs
+ (gnu packages emacs-xyz) ; for exwm
+ (gnu packages linux)) ; for powertop
+(use-service-modules admin desktop mail networking pm ssh xorg)
+
+(operating-system
+ (host-name "chaman")
+ (locale "en_CA.utf8")
+ (timezone "Canada/Eastern")
+ (keyboard-layout
+ (keyboard-layout "us" "basic"))
+ (bootloader
+ (bootloader-configuration
+ (bootloader grub-bootloader)
+ (target "/dev/sda")
+ (keyboard-layout keyboard-layout)))
+ (mapped-devices
+ (list (mapped-device
+ (source
+ (uuid "283da85e-2c84-47e6-a8ca-20f4e8efb806"))
+ (target "groot")
+ (type luks-device-mapping))
+ (mapped-device
+ (source
+ (uuid "017ddebc-c2c3-4a0a-bda4-d47ec0bc67f0"))
+ (target "data")
+ (type luks-device-mapping))))
+ (file-systems
+ (cons* (file-system
+ (mount-point "/")
+ (device "/dev/mapper/groot")
+ (type "ext4")
+ (dependencies mapped-devices))
+ (file-system
+ (mount-point "/data")
+ (device "/dev/mapper/data")
+ (type "ext4")
+ (dependencies mapped-devices))
+ %base-file-systems))
+ (users
+ (cons* (user-account
+ (name "bandali")
+ (group "users")
+ (home-directory "/home/bandali")
+ (supplementary-groups
+ '("wheel" "netdev" "audio" "video")))
+ %base-user-accounts))
+ (packages
+ (cons* nss-certs
+ emacs-exwm
+ %base-packages))
+ (services
+ (cons*
+ (service xfce-desktop-service-type)
+ (set-xorg-configuration
+ (xorg-configuration
+ (keyboard-layout keyboard-layout)))
+ (dovecot-service
+ #:config
+ (dovecot-configuration
+ ;; (log-path "/dev/stderr")
+ (protocols (list (protocol-configuration
+ (name "imap"))))
+ (ssl? "no")
+ (listen '("127.0.0.1"))
+ (disable-plaintext-auth? #f)
+ (auth-mechanisms '("plain"))
+ (postmaster-address "bandali@gnu.local")
+ (mail-location "maildir:/home/bandali/mail/%d/%n/mail")
+ (userdbs (list (userdb-configuration
+ (driver "static")
+ (args (list "uid=bandali" "gid=users" "home=/home/bandali/mail/%d/%n")))))
+ (passdbs (list (passdb-configuration
+ (driver "passwd-file")
+ (args (list "/data/dovecot-passwd")))))))
+ (service rottlog-service-type)
+ (service thermald-service-type)
+ (service tlp-service-type
+ (tlp-configuration
+ (cpu-boost-on-ac? #t)
+ (sound-power-save-on-bat 0)
+ (sound-power-save-controller? #f)
+ ;; (usb-blacklist "0e8f:00a8") ;for some reason doesn't seem to work
+ (usb-autosuspend? #f)))
+ (simple-service 'my-powertop-auto-tune activation-service-type
+ #~(zero? (system* #$(file-append powertop "/sbin/powertop")
+ "--auto-tune")))
+ (simple-service 'light-udev-rules udev-service-type (list light))
+ %desktop-services)))
#+end_src
** isync
-
-*** mbsyncrc
:PROPERTIES:
-:header-args+: :tangle ~/.mbsyncrc
+:header-args+: :tangle ~/.config/isync/mbsyncrc
:END:
#+begin_src conf
@@ -1038,28 +551,53 @@ Create Both
Expunge Both
######
-IMAPAccount amin
-Host mail.aminb.org
-User amin@aminb.org
-PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
+IMAPAccount shemshak
+Host mail.shemshak.org
+User amin@shemshak.org
+PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/shemshak.gpg"
+SSLType IMAPS
+
+IMAPStore shemshak-remote
+Account shemshak
+
+IMAPAccount shemshak-local
+Host 127.0.0.1
+Port 143
+User amin@shemshak.local
+PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/shemshak-local.gpg"
+SSLType None
+
+IMAPStore shemshak-local
+Account shemshak-local
+
+Channel shemshak
+Master :shemshak-remote:
+Slave :shemshak-local:
+Patterns *
+
+######
+IMAPAccount gnub
+Host mail.shemshak.org
+User gnu@bandali.eu.org
+PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/gnub.gpg"
SSLType IMAPS
-IMAPStore amin-remote
-Account amin
+IMAPStore gnub-remote
+Account gnub
-IMAPAccount amin-dovecot
+IMAPAccount gnub-local
Host 127.0.0.1
Port 143
-User amin@aminb.org
-PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin-dovecot.gpg"
+User bandali@gnu.local
+PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/gnub-local.gpg"
SSLType None
-IMAPStore amin-local
-Account amin-dovecot
+IMAPStore gnub-local
+Account gnub-local
-Channel amin
-Master :amin-remote:
-Slave :amin-local:
+Channel gnub
+Master :gnub-remote:
+Slave :gnub-local:
Patterns *
######
@@ -1072,59 +610,50 @@ SSLType IMAPS
IMAPStore uwaterloo-remote
Account uwaterloo
-IMAPAccount uwaterloo-dovecot
+IMAPAccount uwaterloo-local
Host 127.0.0.1
Port 143
-User abandali@uwaterloo.ca
-PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo-dovecot.gpg"
+User abandali@uw.local
+PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo-local.gpg"
SSLType None
IMAPStore uwaterloo-local
-Account uwaterloo-dovecot
+Account uwaterloo-local
Channel uwaterloo
Master :uwaterloo-remote:
Slave :uwaterloo-local:
Patterns *
-#+end_src
-*** mbsync.service
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/mbsync.service
-:END:
-
-#+begin_src conf :tangle no
-[Unit]
-Description=mbsync service
-
-[Service]
-Type=oneshot
-ExecStart=/usr/bin/mbsync -Va
-StandardOutput=syslog
-StandardError=syslog
-#+end_src
+######
+IMAPAccount csclub
+Host mail.csclub.uwaterloo.ca
+User abandali
+PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/csclub.gpg"
+SSLType IMAPS
-*** mbsync.timer
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/mbsync.timer
-:END:
+IMAPStore csclub-remote
+Account csclub
-#+begin_src conf :tangle no
-[Unit]
-Description=mbsync timer
+IMAPAccount csclub-local
+Host 127.0.0.1
+Port 143
+User abandali@csc.uw.local
+PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/csclub-local.gpg"
+SSLType None
-[Timer]
-OnCalendar=*:0/15
-Persistent=true
-Unit=mbsync.service
+IMAPStore csclub-local
+Account csclub-local
-[Install]
-WantedBy=timers.target
+Channel csclub
+Master :csclub-remote:
+Slave :csclub-local:
+Patterns *
#+end_src
** Latexmk
:PROPERTIES:
-:header-args+: :tangle ~/.latexmkrc
+:header-args+: :tangle ~/.config/latexmk/latexmkrc
:END:
#+begin_src conf
@@ -1141,23 +670,6 @@ $clean_ext = "aux out";
# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
#+end_src
-** libinput
-
-Improve XPS 15 9560's touchpad experience.
-
-# begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
-#+begin_src conf :tangle no
-Section "InputClass"
- Identifier "libinput touchpad catchall"
- Driver "libinput"
- MatchIsTouchpad "on"
- Option "ClickMethod" "clickfinger"
- Option "NaturalScrolling" "true"
- Option "Tapping" "on"
- Option "TappingButtonMap" "lrm"
-EndSection
-#+end_src
-
** mpd
:PROPERTIES:
:header-args+: :tangle ~/.config/mpd/mpd.conf
@@ -1575,7 +1087,7 @@ audio_output {
** msmtp
:PROPERTIES:
-:header-args+: :tangle ~/.msmtprc
+:header-args+: :tangle ~/.config/msmtp/config
:END:
#+begin_src conf
@@ -1587,2133 +1099,89 @@ auth on
#tls_trust_file /etc/ssl/certs/ca-certificates.crt
logfile ~/.msmtp.log
-# aminb
-account aminb
-host mail.aminb.org
-# use `msmtp -a aminb --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
-tls_fingerprint C7:A4:2E:A3:11:FA:80:45:C4:29:D6:62:4D:73:DB:34:43:67:8F:16:F1:2E:54:43:06:1B:41:B6:A9:09:E0:37
+account shemshak
+host mail.shemshak.org
+# use `msmtp -a shemshak --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
+tls_fingerprint 01:6F:1B:92:0A:E8:47:35:62:80:DD:17:F5:9A:9D:26:7D:59:E2:EC:69:67:36:69:2F:58:8C:89:57:66:F6:B1
tls_starttls on
+from amin@shemshak.org
+user amin@shemshak.org
+passwordeval gpg --no-tty -q -d ~/.passwd/shemshak.gpg
+
+account aminb : shemshak
from amin@aminb.org
-user amin@aminb.org
-passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
+account bndl : shemshak
+from amin@bndl.org
-# gnu
account gnu
host fencepost.gnu.org
# use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
-tls_fingerprint 93:59:52:1D:A6:95:13:31:7C:81:ED:DB:A5:BA:B5:2B:C8:BC:38:3E:71:A5:DF:8C:80:46:C1:E0:5D:2D:F4:E3
+tls_fingerprint A5:E9:14:9F:46:3E:8E:0F:09:8C:5D:21:C2:BE:DE:77:BE:8B:E7:82:6C:56:78:0C:62:CA:46:D7:18:FE:33:05
tls_starttls on
from bandali@gnu.org
user bandali
-passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
+passwordeval gpg --no-tty -q -d ~/.passwd/gnu.gpg
-# gnu (old)
+account gnu-mab : gnu
+from mab@gnu.org
account gnu-aminb : gnu
from aminb@gnu.org
account gnu-amin : gnu
from amin@gnu.org
-account gnu-mab : gnu
-from mab@gnu.org
-# uwaterloo
account uwaterloo
host connect.uwaterloo.ca
tls_starttls on
from abandali@uwaterloo.ca
user abandali
-passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
+passwordeval gpg --no-tty -q -d ~/.passwd/uwaterloo.gpg
+tls_trust_file /etc/ssl/certs/ca-certificates.crt
+
+account uwaterloo-friendly : uwaterloo
+from bandali@uwaterloo.ca
+
+account csclub
+host mail.csclub.uwaterloo.ca
+tls_starttls on
+from abandali@csclub.uwaterloo.ca
+user abandali
+passwordeval gpg --no-tty -q -d ~/.passwd/csclub.gpg
tls_trust_file /etc/ssl/certs/ca-certificates.crt
+account csclub-friendly : csclub
+from bandali@csclub.uwaterloo.ca
+
# Set a default account
-account default : aminb
+account default : shemshak
#+end_src
-** ncmpcpp
+** Readline
+:PROPERTIES:
+:header-args+: :tangle ~/.config/readline/inputrc
+:END:
-*** config
+#+begin_src conf
+set enable-bracketed-paste on
+
+set colored-stats on
+set colored-completion-prefix on
+set completion-ignore-case on
+set menu-complete-display-prefix on
+set page-completions off
+set show-all-if-ambiguous on
+set show-all-if-unmodified on
+set visible-stats on
+
+TAB: menu-complete
+"\e[Z": menu-complete-backward
+
+"\e[A": history-search-backward
+"\e[B": history-search-forward
+#+end_src
+
+** rofi
:PROPERTIES:
-:header-args+: :tangle ~/.ncmpcpp/config
-:END:
-
-#+begin_src conf :tangle no
-##############################################################
-## This is the example configuration file. Copy it to ##
-## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
-## and set up your preferences. ##
-##############################################################
-#
-##### directories ######
-##
-## Directory for storing ncmpcpp related files.
-## Changing it is useful if you want to store
-## everything somewhere else and provide command
-## line setting for alternative location to config
-## file which defines that while launching ncmpcpp.
-##
-#
-ncmpcpp_directory = ~/.ncmpcpp
-#
-##
-## Directory for storing downloaded lyrics. It
-## defaults to ~/.lyrics since other MPD clients
-## (eg. ncmpc) also use that location.
-##
-#
-#lyrics_directory = ~/.lyrics
-#
-##### connection settings #####
-#
-#mpd_host = localhost
-#
-#mpd_port = 6600
-#
-#mpd_connection_timeout = 5
-#
-## Needed for tag editor and file operations to work.
-##
-mpd_music_dir = ~/usr/music
-#
-#mpd_crossfade_time = 5
-#
-##### music visualizer #####
-##
-## Note: In order to make music visualizer work you'll
-## need to use mpd fifo output, whose format parameter
-## has to be set to 44100:16:1 for mono visualization
-## or 44100:16:2 for stereo visualization. Example
-## configuration (it has to be put into mpd.conf):
-##
-## audio_output {
-## type "fifo"
-## name "Visualizer feed"
-## path "/tmp/mpd.fifo"
-## format "44100:16:2"
-## }
-##
-#
-visualizer_fifo_path = /tmp/mpd.fifo
-#
-##
-## Note: Below parameter is needed for ncmpcpp
-## to determine which output provides data for
-## visualizer and thus allow syncing between
-## visualization and sound as currently there
-## are some problems with it.
-##
-#
-visualizer_output_name = my fifo
-#
-##
-## If you set format to 44100:16:2, make it 'yes'.
-##
-visualizer_in_stereo = yes
-#
-##
-## Multiply received samples by given value. Very
-## useful for proper visualization of quiet music.
-##
-#visualizer_sample_multiplier = 1
-#
-##
-## Note: Below parameter defines how often ncmpcpp
-## has to "synchronize" visualizer and audio outputs.
-## 30 seconds is optimal value, but if you experience
-## synchronization problems, set it to lower value.
-## Keep in mind that sane values start with >=10.
-##
-#
-visualizer_sync_interval = 30
-#
-##
-## Note: To enable spectrum frequency visualization
-## you need to compile ncmpcpp with fftw3 support.
-##
-#
-## Available values: spectrum, wave, wave_filled, ellipse.
-##
-visualizer_type = spectrum
-#
-#visualizer_look = ââ®
-visualizer_look = "ââ¢"
-#
-#visualizer_color = blue, cyan, green, yellow, magenta, red
-#
-## Alternative subset of 256 colors for terminals that support it.
-##
-#visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
-#
-##### system encoding #####
-##
-## ncmpcpp should detect your charset encoding
-## but if it failed to do so, you can specify
-## charset encoding you are using here.
-##
-## Note: You can see whether your ncmpcpp build
-## supports charset detection by checking output
-## of `ncmpcpp --version`.
-##
-## Note: Since MPD uses UTF-8 by default, setting
-## this option makes sense only if your encoding
-## is different.
-##
-#
-#system_encoding = ""
-#
-##### delays #####
-#
-## Time of inactivity (in seconds) after playlist
-## highlighting will be disabled (0 = always on).
-##
-#playlist_disable_highlight_delay = 5
-#
-## Defines how long messages are supposed to be visible.
-##
-#message_delay_time = 5
-#
-##### song format #####
-##
-## For a song format you can use:
-##
-## %l - length
-## %f - filename
-## %D - directory
-## %a - artist
-## %A - album artist
-## %t - title
-## %b - album
-## %y - date
-## %n - track number (01/12 -> 01)
-## %N - full track info (01/12 -> 01/12)
-## %g - genre
-## %c - composer
-## %p - performer
-## %d - disc
-## %C - comment
-## %P - priority
-## $R - begin right alignment
-##
-## If you want to make sure that a part of the format is displayed
-## only when certain tags are present, you can archieve it by
-## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
-## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
-## It is also possible to define a list of alternatives by providing
-## several groups and separating them with '|', e.g. '{%t}|{%f}'
-## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
-## present.
-##
-## Note: If you want to set limit on maximal length of a tag, just
-## put the appropriate number between % and character that defines
-## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
-##
-## In addition, formats support markers used for text attributes.
-## They are followed by character '$'. After that you can put:
-##
-## - 0 - default window color (discards all other colors)
-## - 1 - black
-## - 2 - red
-## - 3 - green
-## - 4 - yellow
-## - 5 - blue
-## - 6 - magenta
-## - 7 - cyan
-## - 8 - white
-## - 9 - end of current color
-## - b - bold text
-## - u - underline text
-## - r - reverse colors
-## - a - use alternative character set
-##
-## If you don't want to use a non-color attribute anymore, just put it
-## again, but this time insert character '/' between '$' and attribute
-## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
-## or filename with reversed colors.
-##
-## If you want to use 256 colors and/or background colors in formats
-## (the naming scheme is described below in section about color
-## definitions), it can be done with the syntax $(COLOR), e.g. to set
-## the artist tag to one of the non-standard colors and make it have
-## yellow background, you need to write $(197_yellow)%a$(end). Note
-## that for standard colors this is interchangable with attributes
-## listed above.
-##
-## Note: colors can be nested.
-##
-#
-#song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
-#
-#song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
-#
-#song_library_format = {%n - }{%t}|{%f}
-#
-#
-#alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
-#
-#alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
-#
-#now_playing_prefix = $b
-#
-#now_playing_suffix = $/b
-#
-#browser_playlist_prefix = "$2playlist$9 "
-#
-#selected_item_prefix = $6
-#
-#selected_item_suffix = $9
-#
-#modified_item_prefix = $3> $9
-#
-##
-## Note: attributes are not supported for the following variables.
-##
-#song_window_title_format = {%a - }{%t}|{%f}
-##
-## Note: Below variables are used for sorting songs in browser.
-## The sort mode determines how songs are sorted, and can be used
-## in combination with a sort format to specify a custom sorting format.
-## Available values for browser_sort_mode are "name", "mtime", "format"
-## and "noop".
-##
-#
-#browser_sort_mode = name
-#
-#browser_sort_format = {%a - }{%t}|{%f} {(%l)}
-#
-##### columns settings #####
-##
-## syntax of song columns list format is "column column etc."
-##
-## - syntax for each column is:
-##
-## (width of the column)[color of the column]{displayed tag}
-##
-## Note: Width is by default in %, if you want a column to
-## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
-## will be the column that take 10% of screen (so the real width
-## will depend on actual screen size), whereas (10f)[white]{a}
-## will take 10 terminal cells, no matter how wide the screen is.
-##
-## - color is optional (if you want the default one,
-## leave the field empty).
-##
-## Note: You can give a column additional attributes by putting appropriate
-## character after displayed tag character. Available attributes are:
-##
-## - r - column will be right aligned
-## - E - if tag is empty, empty tag marker won't be displayed
-##
-## You can also:
-##
-## - give a column custom name by putting it after attributes,
-## separated with character ':', e.g. {lr:Length} gives you
-## right aligned column of lengths named "Length".
-##
-## - define sequence of tags, that have to be displayed in case
-## predecessor is empty in a way similar to the one in classic
-## song format, i.e. using '|' character, e.g. {a|c|p:Owner}
-## creates column named "Owner" that tries to display artist
-## tag and then composer and performer if previous ones are
-## not available.
-##
-#
-#song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
-#
-##### various settings #####
-#
-##
-## Note: Custom command that will be executed each
-## time song changes. Useful for notifications etc.
-##
-#execute_on_song_change = ""
-#
-#playlist_show_mpd_host = no
-#
-#playlist_show_remaining_time = no
-#
-#playlist_shorten_total_times = no
-#
-#playlist_separate_albums = no
-#
-##
-## Note: Possible display modes: classic, columns.
-##
-#playlist_display_mode = columns
-#
-#browser_display_mode = classic
-#
-#search_engine_display_mode = classic
-#
-#playlist_editor_display_mode = classic
-#
-#discard_colors_if_item_is_selected = yes
-#
-#incremental_seeking = yes
-#
-#seek_time = 1
-#
-#volume_change_step = 2
-#
-#autocenter_mode = no
-#
-#centered_cursor = no
-#
-##
-## Note: You can specify third character which will
-## be used to build 'empty' part of progressbar.
-##
-#progressbar_look = =>
-progressbar_look = "ââ¼â¶"
-#progressbar_look = "âââ¶"
-#
-#progressbar_boldness = yes
-#
-## Available values: database, playlist.
-##
-#default_place_to_search_in = database
-#
-## Available values: classic, alternative.
-##
-#user_interface = classic
-#
-#data_fetching_delay = yes
-#
-## Available values: artist, album_artist, date, genre, composer, performer.
-##
-#media_library_primary_tag = artist
-#
-## Available values: wrapped, normal.
-##
-#default_find_mode = wrapped
-#
-#default_tag_editor_pattern = %n - %t
-#
-#header_visibility = yes
-#
-#statusbar_visibility = yes
-#
-#titles_visibility = yes
-#
-#header_text_scrolling = yes
-#
-#cyclic_scrolling = no
-#
-#lines_scrolled = 2
-#
-#follow_now_playing_lyrics = no
-#
-#fetch_lyrics_for_current_song_in_background = no
-#
-#store_lyrics_in_song_dir = no
-#
-#generate_win32_compatible_filenames = yes
-#
-#allow_for_physical_item_deletion = no
-#
-##
-## Note: If you set this variable, ncmpcpp will try to
-## get info from last.fm in language you set and if it
-## fails, it will fall back to english. Otherwise it will
-## use english the first time.
-##
-## Note: Language has to be expressed as an ISO 639 alpha-2 code.
-##
-#lastfm_preferred_language = en
-#
-#show_hidden_files_in_local_browser = no
-#
-##
-## How shall screen switcher work?
-##
-## - "previous" - switch between the current and previous screen.
-## - "screen1,...,screenN" - switch between given sequence of screens.
-##
-## Screens available for use: help, playlist, browser, search_engine,
-## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
-##
-#screen_switcher_mode = playlist, browser
-#
-##
-## Note: You can define startup screen
-## by choosing screen from the list above.
-##
-#startup_screen = playlist
-#
-##
-## Note: You can define startup slave screen
-## by choosing screen from the list above or
-## an empty value for no slave screen.
-##
-#startup_slave_screen = ""
-#
-#startup_slave_screen_focus = no
-#
-##
-## Default width of locked screen (in %).
-## Acceptable values are from 20 to 80.
-##
-#
-#locked_screen_width_part = 50
-#
-#ask_for_locked_screen_width_part = yes
-#
-#jump_to_now_playing_song_at_start = yes
-#
-#ask_before_clearing_playlists = yes
-#
-#clock_display_seconds = no
-#
-#display_volume_level = yes
-#
-#display_bitrate = no
-#
-#display_remaining_time = no
-#
-## Available values: none, basic, extended, perl.
-##
-#regular_expressions = perl
-#
-##
-## Note: If below is enabled, ncmpcpp will ignore leading
-## "The" word while sorting items in browser, tags in
-## media library, etc.
-##
-#ignore_leading_the = no
-#
-#block_search_constraints_change_if_items_found = yes
-#
-#mouse_support = yes
-#
-#mouse_list_scroll_whole_page = yes
-#
-#empty_tag_marker =
-#
-#tags_separator = " | "
-#
-#tag_editor_extended_numeration = no
-#
-#media_library_sort_by_mtime = no
-#
-#enable_window_title = yes
-#
-##
-## Note: You can choose default search mode for search
-## engine. Available modes are:
-##
-## - 1 - use mpd built-in searching (no regexes, pattern matching)
-## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
-## but if your mpd is on a remote machine, downloading big database
-## to process it can take a while
-## - 3 - match only exact values (this mode uses mpd function for searching
-## in database and local one for searching in current playlist)
-##
-#
-#search_engine_default_search_mode = 1
-#
-#external_editor = nano
-#
-## Note: set to yes if external editor is a console application.
-##
-#use_console_editor = yes
-#
-##### colors definitions #####
-##
-## It is possible to set a background color by setting a color
-## value "_", e.g. red_black will set
-## foregound color to red and background color to black.
-##
-## In addition, for terminals that support 256 colors it
-## is possible to set one of them by using a number in range
-## [1, 256] instead of color name, e.g. numerical value
-## corresponding to red_black is 2_1. To find out if the
-## terminal supports 256 colors, run ncmpcpp and check out
-## the bottom of the help screen for list of available colors
-## and their numerical values.
-##
-## Note: due to technical limitations of ncurses, if 256 colors
-## are used, it is possible to either use only the colors with
-## default background color, or all pairs from 1_1 up to 254_127,
-## depending on the ncurses version used.
-##
-#
-#colors_enabled = yes
-#
-#empty_tag_color = cyan
-#
-#header_window_color = default
-#
-#volume_color = default
-#
-#state_line_color = default
-#
-#state_flags_color = default
-#
-#main_window_color = yellow
-#
-#color1 = white
-#
-#color2 = green
-#
-#main_window_highlight_color = yellow
-#
-#progressbar_color = black
-#
-#progressbar_elapsed_color = green
-#
-#statusbar_color = default
-#
-#alternative_ui_separator_color = black
-#
-#active_column_color = red
-#
-#window_border_color = green
-#
-#active_window_border = red
-#
-#+end_src
-
-*** bindings
-:PROPERTIES:
-:header-args+: :tangle ~/.ncmpcpp/bindings
-:END:
-
-#+begin_src conf :tangle no
-def_key "j"
- scroll_down
-def_key "k"
- scroll_up
-
-def_key "ctrl-u"
- page_up
-def_key "ctrl-d"
- page_down
-
-def_key "h"
- previous_column
-def_key "l"
- next_column
-
-def_key "."
- show_lyrics
-
-def_key "n"
- next_found_item
-def_key "N"
- previous_found_item
-
-def_key "J"
- move_sort_order_down
-def_key "K"
- move_sort_order_up
-#+end_src
-
-** notmuch
-
-*** notmuch-config
-:PROPERTIES:
-:header-args+: :tangle ~/.notmuch-config
-:END:
-
-#+begin_src conf
-# .notmuch-config - Configuration file for the notmuch mail system
-#
-# For more information about notmuch, see https://notmuchmail.org
-
-# Database configuration
-#
-# The only value supported here is 'path' which should be the top-level
-# directory where your mail currently exists and to where mail will be
-# delivered in the future. Files should be individual email messages.
-# Notmuch will store its database within a sub-directory of the path
-# configured here named ".notmuch".
-#
-[database]
-path=/home/amin/oldmail
-
-# User configuration
-#
-# Here is where you can let notmuch know how you would like to be
-# addressed. Valid settings are
-#
-# name Your full name.
-# primary_email Your primary email address.
-# other_email A list (separated by ';') of other email addresses
-# at which you receive email.
-#
-# Notmuch will use the various email addresses configured here when
-# formatting replies. It will avoid including your own addresses in the
-# recipient list of replies, and will set the From address based on the
-# address to which the original email was addressed.
-#
-[user]
-name=Amin Bandali
-primary_email=amin@aminb.org
-other_email=bandali@gnu.org;abandali@uwaterloo.ca;
-
-# Configuration for "notmuch new"
-#
-# The following options are supported here:
-#
-# tags A list (separated by ';') of the tags that will be
-# added to all messages incorporated by "notmuch new".
-#
-# ignore A list (separated by ';') of file and directory names
-# that will not be searched for messages by "notmuch new".
-#
-# NOTE: *Every* file/directory that goes by one of those
-# names will be ignored, independent of its depth/location
-# in the mail store.
-#
-[new]
-tags=new;
-#tags=unread;inbox;
-ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
-
-# Search configuration
-#
-# The following option is supported here:
-#
-# exclude_tags
-# A ;-separated list of tags that will be excluded from
-# search results by default. Using an excluded tag in a
-# query will override that exclusion.
-#
-[search]
-exclude_tags=deleted;spam;
-
-# Maildir compatibility configuration
-#
-# The following option is supported here:
-#
-# synchronize_flags Valid values are true and false.
-#
-# If true, then the following maildir flags (in message filenames)
-# will be synchronized with the corresponding notmuch tags:
-#
-# Flag Tag
-# ---- -------
-# D draft
-# F flagged
-# P passed
-# R replied
-# S unread (added when 'S' flag is not present)
-#
-# The "notmuch new" command will notice flag changes in filenames
-# and update tags, while the "notmuch tag" and "notmuch restore"
-# commands will notice tag changes and update flags in filenames
-#
-[maildir]
-synchronize_flags=true
-
-# Cryptography related configuration
-#
-# The following option is supported here:
-#
-# gpg_path
-# binary name or full path to invoke gpg.
-#
-[crypto]
-gpg_path=gpg
-#+end_src
-
-*** pre-new hook
-:PROPERTIES:
-:header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
-:END:
-
-#+begin_src sh
-touch /tmp/gnusieve.log
-sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
- -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
-#+end_src
-
-*** post-new hook
-:PROPERTIES:
-:header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
-:END:
-
-#+begin_src sh
-# apply sent tag to messages sent by me
-notmuch tag -new +sent -- from:amin@aminb.org or from:bandali@gnu.org or from:aminb@gnu.org or from:amin@gnu.org or from:mab@gnu.org or from:abandali@uwaterloo.ca
-
-# initial tagging
-notmuch tag -latest -- tag:latest
-notmuch tag +inbox +unread +latest -new -- tag:new
-
-
-# apply tags to lists
-
-#
-notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
-notmuch tag -inbox +lists/haskell-weekly -- folder:amin/lists/haskell-weekly
-
-notmuch tag -inbox +pay -- folder:amin/pay
-notmuch tag -inbox +banking -- folder:amin/banking
-notmuch tag -inbox +work -- folder:amin/work
-#
-
-#
-notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
-notmuch tag -inbox +uw/cs846 -- folder:uwaterloo/lists/cs846
-notmuch tag -inbox +uw/ece750 -- folder:uwaterloo/lists/ece750
-notmuch tag -inbox +uw/se212 -- folder:uwaterloo/lists/se212
-notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
-
-notmuch tag -inbox +lists/alloytools -- folder:uwaterloo/lists/alloytools
-notmuch tag -inbox +lists/clvsingle -- folder:uwaterloo/lists/Clvsingle
-notmuch tag -inbox +lists/gsa -- folder:uwaterloo/lists/GSA
-notmuch tag -inbox +lists/math-grad -- folder:uwaterloo/lists/Math-grad
-notmuch tag -inbox +lists/scs-grads -- folder:uwaterloo/lists/scs-grads
-notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
-#
-
-#
-notmuch tag -inbox +l/emacs-devel -- folder:gnu/l/emacs-devel
-notmuch tag -inbox +l/emacs-orgmode -- folder:gnu/l/emacs-orgmode
-notmuch tag -inbox +l/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
-notmuch tag -inbox +l/fencepost-users -- folder:gnu/l/fencepost-users
-notmuch tag -inbox +l/guix-devel -- folder:gnu/l/guix-devel
-notmuch tag -inbox +l/guile-devel -- folder:gnu/l/guile-devel
-notmuch tag -inbox +l/help-gnu-emacs -- folder:gnu/l/help-gnu-emacs
-notmuch tag -inbox +l/info-gnu-emacs -- folder:gnu/l/info-gnu-emacs
-notmuch tag -inbox +l/www-commits -- folder:gnu/l/www-commits
-notmuch tag -inbox +l/www-discuss -- folder:gnu/l/www-discuss
-notmuch tag -inbox +webmasters -- folder:gnu/webmasters
-
-notmuch tag -inbox +l/deepspec -- folder:gnu/l/deepspec
-notmuch tag -inbox +l/haskell-cafe -- folder:gnu/l/haskell-cafe
-notmuch tag -inbox +l/haskell-art -- folder:gnu/l/haskell-art
-notmuch tag -inbox +l/notmuch -- folder:gnu/l/notmuch
-
-notmuch tag -inbox +l/~aminb/test-priv -- folder:gnu/l/~aminb/test-priv
-notmuch tag -inbox +l/~sircmpwn/sr.ht-admins -- folder:gnu/l/~sircmpwn/sr.ht-admins
-notmuch tag -inbox +l/~sircmpwn/sr.ht-announce -- folder:gnu/l/~sircmpwn/sr.ht-announce
-notmuch tag -inbox +l/~sircmpwn/sr.ht-dev -- folder:gnu/l/~sircmpwn/sr.ht-dev
-notmuch tag -inbox +l/~sircmpwn/sr.ht-discuss -- folder:gnu/l/~sircmpwn/sr.ht-discuss
-#
-
-notmuch tag -inbox -unread +archive/notmuch -- path:archive/notmuch/**
-notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**
-#+end_src
-
-*** notmuch.service
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/notmuch.service
-:END:
-
-#+begin_src conf :tangle no
-[Unit]
-Description=notmuch service
-
-[Service]
-Type=oneshot
-ExecStart=/usr/bin/notmuch new
-StandardOutput=syslog
-StandardError=syslog
-#+end_src
-
-*** notmuch.timer
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/notmuch.timer
-:END:
-
-#+begin_src conf :tangle no
-[Unit]
-Description=notmuch timer
-
-[Timer]
-OnCalendar=*:0/5
-Persistent=true
-Unit=notmuch.service
-
-[Install]
-WantedBy=timers.target
-#+end_src
-
-** offlineimap
-
-*** offlineimaprc
-:PROPERTIES:
-:header-args+: :tangle ~/.offlineimaprc
-:END:
-
-#+begin_src conf :tangle no
-[general]
-pythonfile = ~/.offlineimap.py
-accounts = Gmail, aminb
-maxsyncaccounts = 3
-
-[Account Gmail]
-localrepository = GmailL
-remoterepository = GmailR
-
-[Account aminb]
-localrepository = aminbL
-remoterepository = aminbR
-
-[Repository GmailL]
-type = Maildir
-localfolders = ~/Maildir/Gmail
-
-[Repository GmailR]
-type = IMAP
-remotehost = imap.gmail.com
-remoteusereval = mailuser("gmail")
-remotepasseval = mailpasswd("gmail")
-sslcacertfile = /etc/ssl/certs/ca-certificates.crt
-ssl = yes
-folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
-maxconnections = 1
-realdelete = no
-
-[Repository aminbL]
-type = Maildir
-localfolders = ~/Maildir/aminb
-
-[Repository aminbR]
-type = IMAP
-remotehost = mail.aminb.org
-remoteusereval = mailuser("aminb")
-remotepasseval = mailpasswd("aminb")
-sslcacertfile = /etc/ssl/certs/ca-certificates.crt
-ssl = yes
-folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
-maxconnections = 1
-realdelete = no
-#+end_src
-
-*** offlineimap.py
-:PROPERTIES:
-:header-args+: :tangle ~/.offlineimap.py
-:END:
-
-#+begin_src python :tangle no
-import os
-import subprocess
-
-def mailpasswd(acct):
- acct = os.path.basename(acct)
- path = "/home/amin/.passwd/%s.gpg" % acct
- args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
- try:
- return subprocess.check_output(args).strip()
- except subprocess.CalledProcessError:
- return ""
-
-def mailuser(acct):
- acct = os.path.basename(acct)
- path = "/home/amin/.passwd/%s" % acct
- args = ["cat", path]
- try:
- return subprocess.check_output(args).strip()
- except subprocess.CalledProcessError:
- return ""
-
-def prime_gpg_agent():
- ret = False
- i = 1
- while not ret:
- ret = (mailpasswd("prime") == "prime")
- if i > 2:
- from offlineimap.ui import getglobalui
- sys.stderr.write("Error reading in passwords. Terminating.\n")
- getglobalui().terminate()
- i += 1
- return ret
-
-prime_gpg_agent()
-#+end_src
-
-** pigeonhole
-*** gnu.sieve
-:PROPERTIES:
-:header-args+: :tangle ~/sieve/gnu.sieve :comments none
-:END:
-
-#+begin_src conf
-require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags", "include" ];
-
-if anyof (
- address :is "from" "webmasters@gnu.org",
- address :is "from" "webmasters-comment@gnu.org") {
- fileinto :create "webmasters";
- stop;
-}
-
-include :personal "lists";
-#+end_src
-
-*** lists.sieve
-:PROPERTIES:
-:header-args+: :tangle ~/sieve/lists.sieve :comments none
-:END:
-
-#+begin_src conf
-require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags",
- "include" ];
-
-if anyof (
- header :contains "list-id" "",
- header :contains "list-id" "",
- header :contains "list-id" "",
- header :contains "list-id" "",
- header :contains "list-id" "",
- header :contains "list-id" "",
- header :contains "list-id" "",
- header :contains "list-id" "",
- header :contains "list-id" "",
- header :contains "list-id" "",
- header :contains "list-id" "",
- header :contains "list-id" "",
- header :contains "list-id" "",
- header :contains "list-id" "") {
- if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
- set :lower "listname" "${1}";
- fileinto :create "l/${listname}";
- }
-}
-
-if anyof (
- header :contains "list-id" "<~aminb/test-priv@lists.sr.ht>",
- header :contains "list-id" "<~sircmpwn/sr.ht-admins@lists.sr.ht>",
- header :contains "list-id" "<~sircmpwn/sr.ht-announce@lists.sr.ht>",
- header :contains "list-id" "<~sircmpwn/sr.ht-dev@lists.sr.ht>",
- header :contains "list-id" "<~sircmpwn/sr.ht-discuss@lists.sr.ht>") {
- if header :regex "list-id" "(~[a-z_0-9-]+)/([a-z_0-9.-]+)@" {
- set :lower "username" "${1}";
- set :lower "listname" "${2}";
- fileinto :create "l/${username}/${listname}";
- }
-}
-#+end_src
-
-** polybar
-
-*** config
-:PROPERTIES:
-:header-args+: :tangle ~/.config/polybar/config
-:END:
-
-#+begin_src conf :tangle no
-;=====================================================
-;
-; To learn more about how to configure Polybar
-; go to https://github.com/jaagr/polybar
-;
-; The README contains alot of information
-;
-;=====================================================
-
-[colors]
-;background = ${xrdb:color0:#222}
-background = #222
-background-alt = #444
-;foreground = ${xrdb:color7:#222}
-foreground = #eee
-foreground-alt = #888
-primary = #ffb52a
-secondary = #e60053
-alert = #bd2c40
-
-[bar/main]
-;monitor = ${env:MONITOR:HDMI-1}
-width = 100%
-height = 27
-;offset-x = 1%
-;offset-y = 1%
-radius = 3.0
-fixed-center = true
-
-background = ${colors.background}
-foreground = ${colors.foreground}
-
-line-size = 3
-line-color = #f00
-
-border-size = 4
-border-color = #00000000
-
-padding-left = 0
-padding-right = 2
-
-module-margin-left = 2
-module-margin-right = 2
-
-font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
-font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
-font-2 = Wuncon Siji:pixelsize=10;1
-font-3 = FontAwesome:pixelsize=10;1
-
-modules-left = bspwm xwindow
-modules-center =
-modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
-
-tray-position = right
-tray-padding = 1
-;tray-transparent = true
-;tray-background = #0063ff
-tray-maxsize = 18
-
-wm-restack = bspwm
-
-;override-redirect = true
-
-scroll-up = bspwm-desknext
-scroll-down = bspwm-deskprev
-
-[module/xwindow]
-type = internal/xwindow
-label = %title:0:50:...%
-
-[module/xkeyboard]
-type = internal/xkeyboard
-blacklist-0 = num lock
-
-format-prefix = "î¯ "
-format-prefix-foreground = ${colors.foreground-alt}
-format-prefix-underline = ${colors.secondary}
-
-label-layout = %layout%
-label-layout-underline = ${colors.secondary}
-
-label-indicator-padding = 2
-label-indicator-margin = 1
-label-indicator-background = ${colors.secondary}
-label-indicator-underline = ${colors.secondary}
-
-[module/filesystem]
-type = internal/fs
-interval = 25
-
-mount-0 = /
-
-label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
-label-unmounted = %mountpoint% not mounted
-label-unmounted-foreground = ${colors.foreground-alt}
-
-[module/bspwm]
-type = internal/bspwm
-
-label-focused = %index%
-label-focused-background = ${colors.background-alt}
-label-focused-underline= ${colors.primary}
-label-focused-padding = 2
-
-label-occupied = %index%
-label-occupied-padding = 2
-
-label-urgent = %index%!
-label-urgent-background = ${colors.alert}
-label-urgent-padding = 2
-
-label-empty = %index%
-label-empty-foreground = ${colors.foreground-alt}
-label-empty-padding = 2
-
-[module/i3]
-type = internal/i3
-format =
-index-sort = true
-wrapping-scroll = false
-
-; Only show workspaces on the same output as the bar
-;pin-workspaces = true
-
-label-mode-padding = 2
-label-mode-foreground = #000
-label-mode-background = ${colors.primary}
-
-; focused = Active workspace on focused monitor
-label-focused = %index%
-label-focused-background = ${module/bspwm.label-focused-background}
-label-focused-underline = ${module/bspwm.label-focused-underline}
-label-focused-padding = ${module/bspwm.label-focused-padding}
-
-; unfocused = Inactive workspace on any monitor
-label-unfocused = %index%
-label-unfocused-padding = ${module/bspwm.label-occupied-padding}
-
-; visible = Active workspace on unfocused monitor
-label-visible = %index%
-label-visible-background = ${self.label-focused-background}
-label-visible-underline = ${self.label-focused-underline}
-label-visible-padding = ${self.label-focused-padding}
-
-; urgent = Workspace with urgency hint set
-label-urgent = %index%
-label-urgent-background = ${module/bspwm.label-urgent-background}
-label-urgent-padding = ${module/bspwm.label-urgent-padding}
-
-[module/mpd]
-type = internal/mpd
-format-online =
-
-icon-prev = î
-icon-stop = î
-icon-play = î
-icon-pause = î
-icon-next = î
-
-label-song-maxlen = 25
-label-song-ellipsis = true
-
-[module/xbacklight]
-type = internal/xbacklight
-
-format =