X-Git-Url: https://git.shemshak.org/gitweb.cgi/~bandali/configs/blobdiff_plain/e0a9b53cf2ccc591c37f5547e5afa1189b41661e..2786a0cdc1953b90ed73e90242882ac8a71b41c9:/rc.org?ds=sidebyside diff --git a/rc.org b/rc.org index 89af541..9d41443 100644 --- a/rc.org +++ b/rc.org @@ -1,5 +1,5 @@ #+title: rc.org -#+property: header-args :comments link :mkdirp yes :results silent +#+property: header-args :comments no :mkdirp yes :results silent * About @@ -12,360 +12,11 @@ Note: This file is best viewed inside Emacs with org mode. * Configs This section contains the configuration files (dotfiles) of various -programs I use. - -** compton -:PROPERTIES: -:header-args+: :tangle ~/.config/compton.conf -:END: - -#+begin_src conf :tangle no -# Shadow -shadow = false; # Enabled client-side shadows on windows. -no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows. -no-dnd-shadow = true; # Don't draw shadows on DND windows. -clear-shadow = true; # Zero the part of the shadow's mask behind the - # window. Fix some weirdness with ARGB windows. -shadow-radius = 5; # The blur radius for shadows. (default 12) -shadow-offset-x = -5; # The left offset for shadows. (default -15) -shadow-offset-y = -5; # The top offset for shadows. (default -15) -# shadow-opacity = 0.7; # The translucency for shadows. (default .75) -# shadow-red = 0.0; # Red color value of shadow. (0.0 - 1.0, defaults to 0) -# shadow-green = 0.0; # Green color value of shadow. (0.0 - 1.0, defaults to 0) -# shadow-blue = 0.0; # Blue color value of shadow. (0.0 - 1.0, defaults to 0) -shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ]; # Exclude conditions for shadows. -# shadow-exclude = "n:e:Notification"; -#shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications -shadow-ignore-shaped = true; # Avoid drawing shadow on all shaped windows - # (see also: --detect-rounded-corners) - -# Opacity -menu-opacity = 1.0; # The opacity for menus. (default 1.0) -#inactive-opacity = 0.9; # Default opacity of inactive windows. (0.0 - 1.0) -# active-opacity = 0.8; # Default opacity for active windows. (0.0 - 1.0) -frame-opacity = 1.0; # Opacity of window titlebars and borders. (0.1 - 1.0) -# inactive-opacity-override = true; # Let inactive opacity set by 'inactive-opacity' overrides - # value of _NET_WM_OPACITY. Bad choice. -alpha-step = 0.06; # XRender backend: Step size for alpha pictures. Increasing - # it may result in less X resource usage, - # Yet fading may look bad. -#inactive-dim = 0.5; # Dim inactive windows. (0.0 - 1.0) -#inactive-dim-fixed = true; # Do not let dimness adjust based on window opacity. -# blur-background = true; # Blur background of transparent windows. - # Bad performance with X Render backend. - # GLX backend is preferred. -# blur-background-frame = true; # Blur background of opaque windows with transparent - # frames as well. -blur-background-fixed = true; # Do not let blur radius adjust based on window opacity. -blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ]; - # Exclude conditions for background blur. - -# Fading -fading = false; # Fade windows during opacity changes. -fade-delta = 3; # The time between steps in a fade in milliseconds. (default 10). -fade-in-step = 0.03; # Opacity change between steps while fading in. (default 0.028). -fade-out-step = 0.03; # Opacity change between steps while fading out. (default 0.03). -# no-fading-openclose = true; # Avoid fade windows in/out when opening/closing. -fade-exclude = [ ]; # Exclude conditions for fading. - -# Other -backend = "glx" # Backend to use: "xrender" or "glx". GLX backend is typically - # much faster but depends on a sane driver. -mark-wmwin-focused = true; # Try to detect WM windows and mark them as active. -mark-ovredir-focused = true; # Mark all non-WM but override-redirect windows active (e.g. menus). -use-ewmh-active-win = true; # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused - # instead of using FocusIn/Out events. Usually more reliable but - # depends on a EWMH-compliant WM. -detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on. -detect-client-opacity = true; # Detect _NET_WM_OPACITY on client windows, useful for window - # managers not passing _NET_WM_OPACITY of client windows to frame - # windows. -refresh-rate = 0; # For --sw-opti: Specify refresh rate of the screen. 0 for auto. -vsync = "drm"; # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc" - # See man page for more details. -dbe = false; # Enable DBE painting mode. Rarely needed. -paint-on-overlay = true; # Painting on X Composite overlay window. Recommended. -sw-opti = false; # Limit compton to repaint at most once every 1 / refresh_rate. - # Incompatible with certain VSync methods. -unredir-if-possible = false; # Unredirect all windows if a full-screen opaque window is - # detected, to maximize performance for full-screen windows. -focus-exclude = [ ]; # A list of conditions of windows that should always be considered - # focused. -detect-transient = true; # Use WM_TRANSIENT_FOR to group windows, and consider windows in - # the same group focused at the same time. -detect-client-leader = true; # Use WM_CLIENT_LEADER to group windows. -invert-color-include = [ ]; # Conditions for windows to be painted with inverted color. - -# GLX backend # GLX backend fine-tune options. See man page for more info. -glx-no-stencil = true; # Recommended. -glx-copy-from-front = false; # Useful with --glx-swap-method, -# glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync. -# glx-no-rebind-pixmap = true; # Recommended if it works. -glx-no-rebind-pixmap = true; # Recommended if it works. -#glx-swap-method = "4"; # See man page. -glx-swap-method = "4"; # See man page. - -# Window type settings -wintypes: -{ - tooltip = { fade = true; shadow = false; opacity = 1; focus = true; }; - menu = { shadow = false; }; - dropdown_menu = { shadow = false; }; - popup_menu = { shadow = false; }; - utility = { shadow = false; }; - # fade: Fade the particular type of windows. - # shadow: Give those windows shadow - # opacity: Default opacity for the type of windows. - # focus: Whether to always consider windows of this type focused. -}; -#+end_src - -** dovecot -:PROPERTIES: -:header-args+: :tangle "/sudo::/etc/dovecot/dovecot.conf" -:END: - -#+begin_src conf -protocols = imap - -listen = 127.0.0.1 -log_path = /var/log/dovecot.log -info_log_path = /var/log/dovecot-info.log - -ssl = no -disable_plaintext_auth = no - -auth_verbose = yes -auth_mechanisms = plain - -passdb { - driver = passwd-file - args = /etc/dovecot/passwd -} - -userdb { - driver = static - args = uid=amin gid=amin home=/home/amin/mail/%d/%n - default_fields = mail=maildir:/home/amin/mail/%d/%n/mail -} - -# mail_home = /home/amin/mail/%d/%n -# mail_location = maildir:/home/amin/mail/%d/%n/mail:LAYOUT=fs:INBOX=/home/amin/mail/%d/%n/mail/Inbox - -# namespace { -# inbox = yes -# separator = / -# } - -mail_plugins = $mail_plugins fts fts_lucene - -plugin { - fts = lucene - fts_lucene = whitespace_chars=@. - fts_autoindex = yes -} -#+end_src - -** Dunst -:PROPERTIES: -:header-args+: :tangle ~/.config/dunst/dunstrc -:END: - -#+begin_src conf -[global] -#font = Ubuntu Mono 10.5 -font = Inconsolata 11 - -# Path to default icons. -icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/ - -icon_position = left -# bold -# italic -# strikethrough -# underline -markup = full -# The format of the message. Possible variables are: -# %a appname -# %s summary -# %b body -# %i iconname (including its path) -# %I iconname (without its path) -# %p progress value if set ([ 0%] to [100%]) or nothing -# Markup is allowed -format = "%s\n%b" -# Sort messages by urgency -sort = yes -# Show how many messages are currently hidden (because of geometry) -indicate_hiddenl= no -# Alignment of message text. -# Possible values are "left", "center" and "right" -alignment = center -# The frequency with wich text that is longer than the notification -# window allows bounces back and forth. -# This option conflicts with 'word_wrap'. -# Set to 0 to disable -bounce_freq = 3 -# show age of message if message is older than show_age_threshold seconds. -# set to -1 to disable -show_age_threshold = -1 -# split notifications into multiple lines if they don't fit into geometry -word_wrap = yes -# ignore newlines '\n' in notifications -ignore_newline = no -# The geometry of the message window. -# geometry [{width}]x{height}][+/-{x}+/-{y}] -# The height is measured in number of notifications everything else in pixels. If the width -# is omitted but the height is given ("-geometry x2"), the message window -# expands over the whole screen (dmenu-like). If width is 0, -# the window expands to the longest message displayed. -# A positive x is measured from the left, a negative from the -# right side of the screen. Y is measured from the top and down respectevly. -# The width can be negative. In this case the actual width is the -# screen width minus the width defined in within the geometry option. -#geometry = "410x12-12+12" -#geometry = "0x0-30-30" -geometry = "260x12-30-30" -# The transparency of the window. range: [0; 100] -# This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..) -transparency = 0 -# Don't remove messages, if the user is idle (no mouse or keyboard input) -# for longer than idle_threshold seconds. -# Set to 0 to disable. -idle_threshold = 120 -# Which monitor should the notifications be displayed on. -monitor = 0 -# Display notification on focused monitor. Possible modes are: -# mouse: follow mouse pointer -# keyboard: follow window with keyboard focus -# none: don't follow anything -# -# "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property. -# This should be the case for almost all modern windowmanagers. -# -# If this option is set to mouse or keyboard, the monitor option will be -# ignored. -follow = keyboard -# should a notification popped up from history be sticky or -# timeout as if it would normally do. -sticky_history = yes -# The height of a single line. If the height is smaller than the font height, -# it will get raised to the font height. -# This adds empty space above and under the text. -line_height = 0 - -show_indicators = yes - -# Draw a line of 'separatpr_height' pixel height between two notifications. -# Set to 0 to disable -separator_height = 3 -# padding between text and separator -padding = 8 -# horizontal padding -horizontal_padding = 8 -# Define a color for the separator. -# possible values are: -# * auto: dunst tries to find a color fitting to the background -# * foreground: use the same color as the foreground -# * frame: use the same color as the frame. -# * anything else will be interpreted as a X color -separator_color = foreground -# print a notification on startup -# This is mainly for error detection, since dbus (re-)starts dunst -# automatically after a crash. -startup_notification = false -# dmenu path -#dmenu = /usr/bin/dmenu -p dunst: -dmenu = /usr/bin/rofi -dmenu -p dunst: -# browser for opening urls in context menu -browser = /usr/bin/firefox -new-tab -[frame] -width = 0 -color = "#377222" -[shortcuts] -# shortcuts are specified as [modifier+][modifier+]...key -# available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3' -# and 'mod4' (windows-key) -# xev might be helpful to find names for keys -# close notification -close = ctrl+space -# close all notifications -close_all = ctrl+shift+space -# redisplay last message(s) -# On the US keyboard layout 'grave' is normally above TAB and left of '1'. -history = ctrl+shift+h -# context menu -context = ctrl+shift+period -[urgency_low] -# IMPORTANT: colors have to be defined in quotation marks. -# Otherwise the '#' and following would be interpreted as a comment. -background = "#1d2a30" -foreground = "#71c2af" -timeout = 3 -[urgency_normal] -background = "#1d2a30" -foreground = "#71c2af" -timeout = 0 -[urgency_critical] -background = "#1d2a30" -foreground = "#ff9982" -timeout = 0 - -# Every section that isn't one of the above is interpreted as a rules -# to override settings for certain messages. -# Messages can be matched by 'appname', 'summary', 'body' or 'icon' -# and you can override the 'timeout', 'urgency', 'foreground', 'background' -# and 'format'. -# Shell-like globbing will get expanded. -# -# SCRIPTING -# you can specify a script that gets run when the rule matches by setting -# the 'script' option. -# The script will be called as follows: -# script appname summary body icon urgency -# where urgency can be "LOW", "NORMAL" or "CRITICAL". -# -# NOTE: if you don't want a notification to be displayed, set the format to "" -# NOTE: It might be helpful to run dunst -print in a terminal in order to find -# fitting options for rules. -#[espeak] -# summary = "*" -# script = dunst_espeak.sh -#[script-test] -# summary = "*script*" -# script = dunst_test.sh -#[ignore] -## This notification will not be displayed -# summary = "foobar" -# format = "" -#[signed_on] -# appname = Pidgin -# summary = "*signed on*" -# urgency = low -# -#[signed_off] -# appname = Pidgin -# summary = *signed off* -# urgency = low -# -#[says] -# appname = Pidgin -# summary = *says* -# urgency = critical -# -#[twitter] -# appname = Pidgin -# summary = *twitter.com* -# urgency = normal -# -[xfpm-backlight] - summary = *Brightness* - urgency = low -#+end_src +programs I use besides GNU Emacs. ** Fontconfig :PROPERTIES: -:header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none +:header-args+: :tangle ~/.config/fontconfig/fonts.conf :END: #+begin_src xml @@ -410,10 +61,8 @@ timeout = 0 #+end_src ** getmail - -*** getmailrc :PROPERTIES: -:header-args+: :tangle ~/.getmail/getmailrc +:header-args+: :tangle ~/.config/getmail/getmailrc :END: #+begin_src conf @@ -421,158 +70,106 @@ timeout = 0 type = SimplePOP3SSLRetriever server = fencepost.gnu.org username = bandali -password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg") +password_command = ("gpg", "--no-tty", "-q", "-d", "/home/bandali/.passwd/gnu.gpg") port = 995 use_apop = True [destination] type = Maildir -path = ~/mail/gnu/Inbox/ +path = ~/mail/gnu.local/bandali/mail/ # [destination] # type = MDA_external # path = /usr/lib/dovecot/deliver -# arguments = ('-d', 'amin@aminb.org') +# arguments = ('-e', '-f', '%(sender)', '-d', 'bandali@gnu.local') [options] -delete = True -#+end_src - -*** getmail.service -:PROPERTIES: -:header-args+: :tangle ~/.config/systemd/user/getmail.service -:END: - -#+begin_src conf :tangle no -[Unit] -Description=getmail service - -[Service] -Type=oneshot -ExecStart=/usr/bin/getmail -StandardOutput=syslog -StandardError=syslog -#+end_src - -*** getmail.timer -:PROPERTIES: -:header-args+: :tangle ~/.config/systemd/user/getmail.timer -:END: - -#+begin_src conf :tangle no -[Unit] -Description=getmail timer - -[Timer] -OnCalendar=*:0/30 -Persistent=true -Unit=getmail.service - -[Install] -WantedBy=timers.target +read_all = false +delete_after = 1 +# delete = true +received = false +delivered_to = false #+end_src ** Git -*** gitconfig +*** config :PROPERTIES: -:header-args+: :tangle ~/.gitconfig +:header-args+: :tangle ~/.config/git/config :END: -**** user #+begin_src conf [user] - name = Amin Bandali - email = bandali@gnu.org - signingkey = BE6273738E616D6D1B3A08E8A21A020248816103 -#+end_src + name = Amin Bandali + email = bandali@gnu.org + signingkey = BE6273738E616D6D1B3A08E8A21A020248816103 -**** signing -#+begin_src conf [commit] - gpgsign = true + gpgsign = true + # [format] -# signoff = true -#+end_src +# signoff = true -**** core -#+begin_src conf [core] - autocrlf = input # CRLF -> LF on commit - editor = emacsclient -t - excludesfile = ~/.gitignore_global - pager = "less" -#+end_src + autocrlf = input # CRLF -> LF on commit + editor = emacsclient -t + pager = "less" -**** gpg -#+begin_src conf -[gpg] - program = gpg2 -#+end_src +[mailmap] + file = ~/.config/git/mailmap -**** alias -#+begin_src conf [alias] - git = !exec git # handle nested git calls, e.g. git git status - aliases = config --get-regexp '^alias\\.' - a = add - s = status - sl = status --long - c = checkout - cb = checkout -b - b = branch - r = rebase - p = pull - pr = pull --rebase - ps = push - psf = push --force - nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f" - nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f" -#+end_src + git = !exec git # handle nested git calls, e.g. git git status + aliases = config --get-regexp '^alias\\.' + a = add + s = status + sl = status --long + c = checkout + cb = checkout -b + b = branch + r = rebase + p = pull + pr = pull --rebase + ps = push + psf = push --force + nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f" + nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f" -**** color -#+begin_src conf [color] - ui = auto + ui = auto [color "status"] - added = green bold - changed = red bold - untracked = red bold + added = green bold + changed = red bold + untracked = red bold [color "branch"] - current = green bold - remote = magenta bold + current = green bold + remote = magenta bold [color "diff"] - new = green bold - old = red bold -#+end_src + new = green bold + old = red bold -**** status -#+begin_src conf -[status] - # showUntrackedFiles = all - short=true - branch=true -#+end_src +# [status] +# # showUntrackedFiles = all +# short=true +# branch=true -**** github -#+begin_src conf [github] - user = aminb -#+end_src + user = notbandali -**** send-email -#+begin_src conf [sendemail] smtpuser = bandali smtpserver = fencepost.gnu.org smtpserverport = 587 smtpencryption = tls annotate = yes + +[transfer] + fsckObjects = true #+end_src -*** gitignore +*** ignore :PROPERTIES: -:header-args+: :tangle ~/.gitignore_global +:header-args+: :tangle ~/.config/git/ignore :END: #+begin_src conf @@ -583,6 +180,20 @@ WantedBy=timers.target .DS_Store *.elc *-autoloads.el +TAGS +#+end_src + +*** mailmap +:PROPERTIES: +:header-args+: :tangle ~/.config/git/mailmap +:END: + +#+begin_src conf + + + + + #+end_src ** GnuPG @@ -592,179 +203,345 @@ WantedBy=timers.target #+begin_src conf default-cache-ttl 43200 -max-cache-ttl 43200 +max-cache-ttl 86400 -default-cache-ttl-ssh 10800 -max-cache-ttl-ssh 10800 +default-cache-ttl-ssh 43200 +max-cache-ttl-ssh 86400 -# pinentry-program /usr/bin/pinentry-qt +pinentry-program /home/bandali/.guix-profile/bin/pinentry-emacs +allow-emacs-pinentry +allow-loopback-pinentry #+end_src ** GTK -*** gtk-2.0 +*** GTK+ 2 :PROPERTIES: :header-args+: :tangle ~/.gtkrc-2.0 :END: #+begin_src conf -gtk-theme-name="Greybird" -gtk-icon-theme-name="Paper" -gtk-font-name="Ubuntu 10" +gtk-theme-name="Xfce" +# gtk-icon-theme-name="elementary Xfce darker" +gtk-font-name="Roboto 10" +# gtk-font-name="Source Code Variable 10" gtk-menu-images=0 # gtk-key-theme-name = "Emacs" #+end_src -*** gtk-3.0 +*** GTK+ 3 :PROPERTIES: :header-args+: :tangle ~/.config/gtk-3.0/settings.ini :END: -#+begin_src conf :tangle no +#+begin_src conf [Settings] -gtk-icon-theme-name = Paper +gtk-icon-theme-name = Adwaita # gtk-theme-name = Adwaita -gtk-theme-name = Greybird +gtk-theme-name = Xfce # gtk-theme-name = Arc-Darker # gtk-theme-name = Numix-ArchBlue -gtk-font-name = Ubuntu 10 +gtk-font-name = Roboto 10 +# gtk-font-name = Source Code Variable Medium 10 # gtk-key-theme-name = Emacs #+end_src -** [[https://github.com/Leinnan/i3gs][i3gs]] -:PROPERTIES: -:header-args+: :tangle ~/.config/i3gs/config -:END: - -#+begin_src conf :comments none :tangle no -borders_width=0 0 2 0 -separator_width=10 - -#[mpd] -#preset=MPD -#title=  -#borders_color=#7FDBFF - -[ram] -preset=RAM -title=  -borders_color=#3D9970 - -#[cpu] -#preset=CPU -#title=  -#borders_color=#2ECC40 - -#[hdd] -#preset=HDD -#title=  -#borders_color=#01FF70 - -[volume] -command=volume-info -title= -borders_color=#7FDBFF - -[battery] -preset=BAT -command=battery-percentage-time -title=  -borders_color=#39CCCC - -[wifi] -preset=WIFI -title=  -borders_color=#01FF70 - -[date] -preset=DATE -command=date '+%-I:%M, %a %b %d ' -title=  -borders_color=#FFDC00 -separator_width=0 -#+end_src - -** i3status -:PROPERTIES: -:header-args+: :tangle ~/.config/i3status/config -:END: - -#+begin_src conf :comments none -# i3status configuration file. -# see "man i3status" for documentation. - -# It is important that this file is edited as UTF-8. -# The following line should contain a sharp s: -# ß -# If the above line is not correctly displayed, fix your editor first! - -general { - colors = true - interval = 5 - output_format = "i3bar" -} - -# order += "ipv6" -order += "disk /" -order += "disk /data" -# order += "wireless _first_" -order += "ethernet _first_" -order += "battery 0" -order += "volume master" -order += "load" -order += "tztime local" - -wireless _first_ { - format_up = "W:%quality %essid %ip" - format_down = "W: down" -} - -ethernet _first_ { - # if you use %speed, i3status requires root privileges - format_up = "E: %ip (%speed)" - format_down = "E: down" -} - -battery 0 { - format = "%status %percentage %remaining (%consumption)" - path = "/sys/class/power_supply/BAT%d/uevent" - low_threshold = "10" - threshold_type = "percentage" - last_full_capacity = true - integer_battery_capacity = true - hide_seconds = true -} - -tztime local { - format = "%-I:%M%P %a %b %d" -} - -volume master { - format = "♪ %volume" - format_muted = "🔇 %volume" - device = "pulse" -} - -load { - format = "%1min" -} - -disk "/" { - format = "/ %avail" -} - -disk "/data" { - format = "/data %avail" -} +** Guix + +*** Channels +:PROPERTIES: +:header-args+: :tangle ~/.config/guix/channels.scm +:END: + +#+begin_src scheme +(list (channel + (name 'guix) ; https://git.savannah.gnu.org/git/guix.git + (url "file:///home/bandali/src/git/guix")) + (channel + (name 'guix-bandali) ; https://git.sr.ht/~bandali/guix-bandali + (url "file:///home/bandali/src/git/guix-bandali"))) +#+end_src + +*** Profile manifests + +To install/update the packages of the default profile, use +#+begin_example +guix package -m $MY_GUIX_MANIFESTS/main.scm +#+end_example +and for other profiles, use +#+begin_example +guix package -m $MY_GUIX_MANIFESTS/name.scm -p $MY_GUIX_PROFILES/name/name +#+end_example +where =name= is the name of the profile (e.g. =doc=, =media=, ...). + +**** doc +:PROPERTIES: +:header-args+: :tangle ~/.config/guix/manifest/doc.scm +:END: + +#+begin_src scheme +(specifications->manifest + '("libreoffice" + "texlive-amsfonts" + "texlive-base" + "texlive-latex-listings" + ;; "texlive-palatino" + "texlive-xcolor" +)) +#+end_src + +**** main +:PROPERTIES: +:header-args+: :tangle ~/.config/guix/manifest/main.scm +:END: + +#+begin_src scheme +(specifications->manifest + '("alsa-utils" + "bash-completion" + "cpufrequtils" + "cpupower" + "cvs" + "dunst" + "emacs" + "emacs-alert" + "emacs-amx" + "emacs-async" + "emacs-biblio-git" + "emacs-boxquote" + "emacs-company" + "emacs-company-ebdb" + "emacs-crux" + "emacs-dash" + "emacs-debbugs" + "emacs-diff-hl" + "emacs-dmenu" + "emacs-doom-themes" + "emacs-ebdb" + "emacs-emmet-mode" + ;; "emacs-emojify" + "emacs-erc-hl-nicks" + "emacs-erc-scrolltoplace" + "emacs-eshell-up" + "emacs-exec-path-from-shell" + "emacs-expand-region" + "emacs-exwm" + "emacs-exwm-edit" + "emacs-flycheck" + "emacs-geiser" + ;; "emacs-gnus-harvest" + "emacs-guix" + "emacs-helpful" + "emacs-hl-todo" + "emacs-ivy" + "emacs-magit" + "emacs-message-x" + "emacs-minions" + ;; "emacs-multi-term" + "emacs-multiple-cursors" + "emacs-mwim" + ;; "emacs-next" + ;; "emacs-next-delight" + "emacs-no-littering" + "emacs-org" + "emacs-org-contrib" + "emacs-org-ref" + "emacs-orgalist" + "emacs-page-break-lines" + "emacs-pass" + "emacs-pinentry" + "emacs-projectile" + "emacs-shrink-path-git" + "emacs-smart-mode-line" + "emacs-typo" + "emacs-unkillable-scratch" + "emacs-use-package" + "emacs-web-mode" + "emacs-which-key" + "emacs-yasnippet" + "emacs-znc-git" + "font-adobe-source-code-pro" + "font-gnu-freefont-ttf" + "font-google-roboto" + "font-liberation" + "font-linuxlibertine" + "font-sil-gentium" + "font-tex-gyre" + ;; "font-ubuntu" + "font-vazir" + "getmail" + "gettext" + "git" + "git:send-email" + "gnupg" + "guile" + "haunt" + "htop" + "hunspell" + "hunspell-dict-en-ca" + "hunspell-dict-en-us" + "isync" + "light" + "msmtp" + "ncdu" + "notmuch" + "openjdk" + "openssh" + "openssl" + "pass-otp" + "password-store" + "pasystray" + "pinentry-emacs" + "poppler" ; for 'pdffonts' + "rofi" + "rofi-pass" + "rsync" + "rxvt-unicode" + "screen" + "scrot" + "setxkbmap" + "strace" + "thinkfan" + "unzip" + "wget" + "xdg-user-dirs" + ;; "xkbcomp" + "xmodmap" + "xrdb" + "xset" + "xsetroot")) +#+end_src + +**** media +:PROPERTIES: +:header-args+: :tangle ~/.config/guix/manifest/media.scm +:END: + +#+begin_src scheme +(specifications->manifest + '("audacity" + "gimp" + "inkscape" + "mpv" + "youtube-dl")) +#+end_src + +**** web +:PROPERTIES: +:header-args+: :tangle ~/.config/guix/manifest/web.scm +:END: + +#+begin_src scheme +(specifications->manifest + '("icecat" + "rtv")) +#+end_src + +*** Systems + +**** chaman +:PROPERTIES: +:header-args+: :tangle ~/.config/guix/system/chaman.scm +:END: + +#+begin_src scheme +(use-modules (gnu) + (gnu packages certs) ; for nss-certs + (gnu packages emacs-xyz) ; for exwm + (gnu packages linux)) ; for powertop +(use-service-modules admin desktop mail networking pm ssh xorg) + +(operating-system + (host-name "chaman") + (locale "en_CA.utf8") + (timezone "Canada/Eastern") + (keyboard-layout + (keyboard-layout "us" "basic")) + (bootloader + (bootloader-configuration + (bootloader grub-bootloader) + (target "/dev/sda") + (keyboard-layout keyboard-layout))) + (mapped-devices + (list (mapped-device + (source + (uuid "283da85e-2c84-47e6-a8ca-20f4e8efb806")) + (target "groot") + (type luks-device-mapping)) + (mapped-device + (source + (uuid "017ddebc-c2c3-4a0a-bda4-d47ec0bc67f0")) + (target "data") + (type luks-device-mapping)))) + (file-systems + (cons* (file-system + (mount-point "/") + (device "/dev/mapper/groot") + (type "ext4") + (dependencies mapped-devices)) + (file-system + (mount-point "/data") + (device "/dev/mapper/data") + (type "ext4") + (dependencies mapped-devices)) + %base-file-systems)) + (users + (cons* (user-account + (name "bandali") + (group "users") + (home-directory "/home/bandali") + (supplementary-groups + '("wheel" "netdev" "audio" "video"))) + %base-user-accounts)) + (packages + (cons* nss-certs + emacs-exwm + %base-packages)) + (services + (cons* + (service xfce-desktop-service-type) + (set-xorg-configuration + (xorg-configuration + (keyboard-layout keyboard-layout))) + (dovecot-service + #:config + (dovecot-configuration + ;; (log-path "/dev/stderr") + (protocols (list (protocol-configuration + (name "imap")))) + (ssl? "no") + (listen '("127.0.0.1")) + (disable-plaintext-auth? #f) + (auth-mechanisms '("plain")) + (postmaster-address "bandali@gnu.local") + (mail-location "maildir:/home/bandali/mail/%d/%n/mail") + (userdbs (list (userdb-configuration + (driver "static") + (args (list "uid=bandali" "gid=users" "home=/home/bandali/mail/%d/%n"))))) + (passdbs (list (passdb-configuration + (driver "passwd-file") + (args (list "/data/dovecot-passwd"))))))) + (service rottlog-service-type) + (service thermald-service-type) + (service tlp-service-type + (tlp-configuration + (cpu-boost-on-ac? #t) + (sound-power-save-on-bat 0) + (sound-power-save-controller? #f) + ;; (usb-blacklist "0e8f:00a8") ;for some reason doesn't seem to work + (usb-autosuspend? #f))) + (simple-service 'my-powertop-auto-tune activation-service-type + #~(zero? (system* #$(file-append powertop "/sbin/powertop") + "--auto-tune"))) + (simple-service 'light-udev-rules udev-service-type (list light)) + %desktop-services))) #+end_src ** isync - -*** mbsyncrc :PROPERTIES: -:header-args+: :tangle ~/.mbsyncrc +:header-args+: :tangle ~/.config/isync/mbsyncrc :END: #+begin_src conf @@ -774,28 +551,53 @@ Create Both Expunge Both ###### -IMAPAccount amin -Host mail.aminb.org -User amin@aminb.org -PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg" +IMAPAccount shemshak +Host mail.shemshak.org +User amin@shemshak.org +PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/shemshak.gpg" +SSLType IMAPS + +IMAPStore shemshak-remote +Account shemshak + +IMAPAccount shemshak-local +Host 127.0.0.1 +Port 143 +User amin@shemshak.local +PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/shemshak-local.gpg" +SSLType None + +IMAPStore shemshak-local +Account shemshak-local + +Channel shemshak +Master :shemshak-remote: +Slave :shemshak-local: +Patterns * + +###### +IMAPAccount gnub +Host mail.shemshak.org +User gnu@bandali.eu.org +PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/gnub.gpg" SSLType IMAPS -IMAPStore amin-remote -Account amin +IMAPStore gnub-remote +Account gnub -IMAPAccount amin-dovecot +IMAPAccount gnub-local Host 127.0.0.1 Port 143 -User amin@aminb.org -PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin-dovecot.gpg" +User bandali@gnu.local +PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/gnub-local.gpg" SSLType None -IMAPStore amin-local -Account amin-dovecot +IMAPStore gnub-local +Account gnub-local -Channel amin -Master :amin-remote: -Slave :amin-local: +Channel gnub +Master :gnub-remote: +Slave :gnub-local: Patterns * ###### @@ -808,15 +610,15 @@ SSLType IMAPS IMAPStore uwaterloo-remote Account uwaterloo -IMAPAccount uwaterloo-dovecot +IMAPAccount uwaterloo-local Host 127.0.0.1 Port 143 -User abandali@uwaterloo.ca -PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo-dovecot.gpg" +User abandali@uw.local +PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo-local.gpg" SSLType None IMAPStore uwaterloo-local -Account uwaterloo-dovecot +Account uwaterloo-local Channel uwaterloo Master :uwaterloo-remote: @@ -833,15 +635,15 @@ SSLType IMAPS IMAPStore csclub-remote Account csclub -IMAPAccount csclub-dovecot +IMAPAccount csclub-local Host 127.0.0.1 Port 143 -User abandali@csclub.uw -PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/csclub-dovecot.gpg" +User abandali@csc.uw.local +PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/csclub-local.gpg" SSLType None IMAPStore csclub-local -Account csclub-dovecot +Account csclub-local Channel csclub Master :csclub-remote: @@ -849,43 +651,9 @@ Slave :csclub-local: Patterns * #+end_src -*** mbsync.service -:PROPERTIES: -:header-args+: :tangle ~/.config/systemd/user/mbsync.service -:END: - -#+begin_src conf :tangle no -[Unit] -Description=mbsync service - -[Service] -Type=oneshot -ExecStart=/usr/bin/mbsync -Va -StandardOutput=syslog -StandardError=syslog -#+end_src - -*** mbsync.timer -:PROPERTIES: -:header-args+: :tangle ~/.config/systemd/user/mbsync.timer -:END: - -#+begin_src conf :tangle no -[Unit] -Description=mbsync timer - -[Timer] -OnCalendar=*:0/15 -Persistent=true -Unit=mbsync.service - -[Install] -WantedBy=timers.target -#+end_src - ** Latexmk :PROPERTIES: -:header-args+: :tangle ~/.latexmkrc +:header-args+: :tangle ~/.config/latexmk/latexmkrc :END: #+begin_src conf @@ -902,94 +670,6 @@ $clean_ext = "aux out"; # $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S'; #+end_src -** libinput - -Improve XPS 15 9560's touchpad experience. - -# begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf") -#+begin_src conf :tangle no -Section "InputClass" - Identifier "libinput touchpad catchall" - Driver "libinput" - MatchIsTouchpad "on" - Option "ClickMethod" "clickfinger" - Option "NaturalScrolling" "true" - Option "Tapping" "on" - Option "TappingButtonMap" "lrm" -EndSection -#+end_src - -** mkinitcpio - -#+begin_src conf :tangle /sudo::/etc/mkinitcpio.conf :comments none -# vim:set ft=sh -# MODULES -# The following modules are loaded before any boot hooks are -# run. Advanced users may wish to specify all system modules -# in this array. For instance: -# MODULES=(piix ide_disk reiserfs) -MODULES=(i915) - -# BINARIES -# This setting includes any additional binaries a given user may -# wish into the CPIO image. This is run last, so it may be used to -# override the actual binaries included by a given hook -# BINARIES are dependency parsed, so you may safely ignore libraries -BINARIES=() - -# FILES -# This setting is similar to BINARIES above, however, files are added -# as-is and are not parsed in any way. This is useful for config files. -FILES=() - -# HOOKS -# This is the most important setting in this file. The HOOKS control the -# modules and scripts added to the image, and what happens at boot time. -# Order is important, and it is recommended that you do not change the -# order in which HOOKS are added. Run 'mkinitcpio -H ' for -# help on a given hook. -# 'base' is _required_ unless you know precisely what you are doing. -# 'udev' is _required_ in order to automatically load modules -# 'filesystems' is _required_ unless you specify your fs modules in MODULES -# Examples: -## This setup specifies all modules in the MODULES setting above. -## No raid, lvm2, or encrypted root is needed. -# HOOKS=(base) -# -## This setup will autodetect all modules for your system and should -## work as a sane default -# HOOKS=(base udev autodetect block filesystems) -# -## This setup will generate a 'full' image which supports most systems. -## No autodetection is done. -# HOOKS=(base udev block filesystems) -# -## This setup assembles a pata mdadm array with an encrypted root FS. -## Note: See 'mkinitcpio -H mdadm' for more information on raid devices. -# HOOKS=(base udev block mdadm encrypt filesystems) -# -## This setup loads an lvm2 volume group on a usb device. -# HOOKS=(base udev block lvm2 filesystems) -# -## NOTE: If you have /usr on a separate partition, you MUST include the -# usr, fsck and shutdown hooks. -HOOKS=(base udev autodetect modconf block keyboard encrypt lvm2 resume filesystems fsck) - -# COMPRESSION -# Use this to compress the initramfs image. By default, gzip compression -# is used. Use 'cat' to create an uncompressed image. -#COMPRESSION="gzip" -#COMPRESSION="bzip2" -#COMPRESSION="lzma" -#COMPRESSION="xz" -#COMPRESSION="lzop" -#COMPRESSION="lz4" - -# COMPRESSION_OPTIONS -# Additional options for the compressor -#COMPRESSION_OPTIONS=() -#+end_src - ** mpd :PROPERTIES: :header-args+: :tangle ~/.config/mpd/mpd.conf @@ -1407,7 +1087,7 @@ audio_output { ** msmtp :PROPERTIES: -:header-args+: :tangle ~/.msmtprc +:header-args+: :tangle ~/.config/msmtp/config :END: #+begin_src conf @@ -1419,1245 +1099,89 @@ auth on #tls_trust_file /etc/ssl/certs/ca-certificates.crt logfile ~/.msmtp.log -# aminb -account aminb -host mail.aminb.org -# use `msmtp -a aminb --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint -tls_fingerprint DE:5F:73:0C:F7:9A:7B:1D:55:AA:49:28:E7:28:49:24:A4:08:55:00:7A:7E:D8:7F:30:06:26:24:11:29:61:07 +account shemshak +host mail.shemshak.org +# use `msmtp -a shemshak --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint +tls_fingerprint 01:6F:1B:92:0A:E8:47:35:62:80:DD:17:F5:9A:9D:26:7D:59:E2:EC:69:67:36:69:2F:58:8C:89:57:66:F6:B1 tls_starttls on -from amin@aminb.org -user amin@aminb.org -passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg +from amin@shemshak.org +user amin@shemshak.org +passwordeval gpg --no-tty -q -d ~/.passwd/shemshak.gpg -account bandali-me : aminb -from amin@bandali.me +account aminb : shemshak +from amin@aminb.org +account bndl : shemshak +from amin@bndl.org -# gnu account gnu host fencepost.gnu.org # use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint -tls_fingerprint FB:DB:E3:7D:96:22:22:20:9F:4A:FD:70:96:99:50:5C:39:B2:29:D9:47:47:52:A8:5A:4A:DF:70:9D:21:DE:C4 +tls_fingerprint A5:E9:14:9F:46:3E:8E:0F:09:8C:5D:21:C2:BE:DE:77:BE:8B:E7:82:6C:56:78:0C:62:CA:46:D7:18:FE:33:05 tls_starttls on from bandali@gnu.org user bandali -passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg +passwordeval gpg --no-tty -q -d ~/.passwd/gnu.gpg -# gnu (old) +account gnu-mab : gnu +from mab@gnu.org account gnu-aminb : gnu from aminb@gnu.org account gnu-amin : gnu from amin@gnu.org -account gnu-mab : gnu -from mab@gnu.org -# uwaterloo account uwaterloo host connect.uwaterloo.ca tls_starttls on from abandali@uwaterloo.ca user abandali -passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg +passwordeval gpg --no-tty -q -d ~/.passwd/uwaterloo.gpg tls_trust_file /etc/ssl/certs/ca-certificates.crt -# csclub +account uwaterloo-friendly : uwaterloo +from bandali@uwaterloo.ca + account csclub host mail.csclub.uwaterloo.ca tls_starttls on from abandali@csclub.uwaterloo.ca user abandali -passwordeval gpg2 --no-tty -q -d ~/.passwd/csclub.gpg +passwordeval gpg --no-tty -q -d ~/.passwd/csclub.gpg tls_trust_file /etc/ssl/certs/ca-certificates.crt +account csclub-friendly : csclub +from bandali@csclub.uwaterloo.ca + # Set a default account -account default : aminb +account default : shemshak #+end_src -** ncmpcpp +** Readline +:PROPERTIES: +:header-args+: :tangle ~/.config/readline/inputrc +:END: -*** config +#+begin_src conf +set enable-bracketed-paste on + +set colored-stats on +set colored-completion-prefix on +set completion-ignore-case on +set menu-complete-display-prefix on +set page-completions off +set show-all-if-ambiguous on +set show-all-if-unmodified on +set visible-stats on + +TAB: menu-complete +"\e[Z": menu-complete-backward + +"\e[A": history-search-backward +"\e[B": history-search-forward +#+end_src + +** rofi :PROPERTIES: -:header-args+: :tangle ~/.ncmpcpp/config -:END: - -#+begin_src conf :tangle no -############################################################## -## This is the example configuration file. Copy it to ## -## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ## -## and set up your preferences. ## -############################################################## -# -##### directories ###### -## -## Directory for storing ncmpcpp related files. -## Changing it is useful if you want to store -## everything somewhere else and provide command -## line setting for alternative location to config -## file which defines that while launching ncmpcpp. -## -# -ncmpcpp_directory = ~/.ncmpcpp -# -## -## Directory for storing downloaded lyrics. It -## defaults to ~/.lyrics since other MPD clients -## (eg. ncmpc) also use that location. -## -# -#lyrics_directory = ~/.lyrics -# -##### connection settings ##### -# -#mpd_host = localhost -# -#mpd_port = 6600 -# -#mpd_connection_timeout = 5 -# -## Needed for tag editor and file operations to work. -## -mpd_music_dir = ~/usr/music -# -#mpd_crossfade_time = 5 -# -##### music visualizer ##### -## -## Note: In order to make music visualizer work you'll -## need to use mpd fifo output, whose format parameter -## has to be set to 44100:16:1 for mono visualization -## or 44100:16:2 for stereo visualization. Example -## configuration (it has to be put into mpd.conf): -## -## audio_output { -## type "fifo" -## name "Visualizer feed" -## path "/tmp/mpd.fifo" -## format "44100:16:2" -## } -## -# -visualizer_fifo_path = /tmp/mpd.fifo -# -## -## Note: Below parameter is needed for ncmpcpp -## to determine which output provides data for -## visualizer and thus allow syncing between -## visualization and sound as currently there -## are some problems with it. -## -# -visualizer_output_name = my fifo -# -## -## If you set format to 44100:16:2, make it 'yes'. -## -visualizer_in_stereo = yes -# -## -## Multiply received samples by given value. Very -## useful for proper visualization of quiet music. -## -#visualizer_sample_multiplier = 1 -# -## -## Note: Below parameter defines how often ncmpcpp -## has to "synchronize" visualizer and audio outputs. -## 30 seconds is optimal value, but if you experience -## synchronization problems, set it to lower value. -## Keep in mind that sane values start with >=10. -## -# -visualizer_sync_interval = 30 -# -## -## Note: To enable spectrum frequency visualization -## you need to compile ncmpcpp with fftw3 support. -## -# -## Available values: spectrum, wave, wave_filled, ellipse. -## -visualizer_type = spectrum -# -#visualizer_look = ●▮ -visualizer_look = "●•" -# -#visualizer_color = blue, cyan, green, yellow, magenta, red -# -## Alternative subset of 256 colors for terminals that support it. -## -#visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161 -# -##### system encoding ##### -## -## ncmpcpp should detect your charset encoding -## but if it failed to do so, you can specify -## charset encoding you are using here. -## -## Note: You can see whether your ncmpcpp build -## supports charset detection by checking output -## of `ncmpcpp --version`. -## -## Note: Since MPD uses UTF-8 by default, setting -## this option makes sense only if your encoding -## is different. -## -# -#system_encoding = "" -# -##### delays ##### -# -## Time of inactivity (in seconds) after playlist -## highlighting will be disabled (0 = always on). -## -#playlist_disable_highlight_delay = 5 -# -## Defines how long messages are supposed to be visible. -## -#message_delay_time = 5 -# -##### song format ##### -## -## For a song format you can use: -## -## %l - length -## %f - filename -## %D - directory -## %a - artist -## %A - album artist -## %t - title -## %b - album -## %y - date -## %n - track number (01/12 -> 01) -## %N - full track info (01/12 -> 01/12) -## %g - genre -## %c - composer -## %p - performer -## %d - disc -## %C - comment -## %P - priority -## $R - begin right alignment -## -## If you want to make sure that a part of the format is displayed -## only when certain tags are present, you can archieve it by -## grouping them with brackets, e.g. '{%a - %t}' will be evaluated -## to 'ARTIST - TITLE' if both tags are present or '' otherwise. -## It is also possible to define a list of alternatives by providing -## several groups and separating them with '|', e.g. '{%t}|{%f}' -## will be evaluated to 'TITLE' or 'FILENAME' if the former is not -## present. -## -## Note: If you want to set limit on maximal length of a tag, just -## put the appropriate number between % and character that defines -## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'. -## -## In addition, formats support markers used for text attributes. -## They are followed by character '$'. After that you can put: -## -## - 0 - default window color (discards all other colors) -## - 1 - black -## - 2 - red -## - 3 - green -## - 4 - yellow -## - 5 - blue -## - 6 - magenta -## - 7 - cyan -## - 8 - white -## - 9 - end of current color -## - b - bold text -## - u - underline text -## - r - reverse colors -## - a - use alternative character set -## -## If you don't want to use a non-color attribute anymore, just put it -## again, but this time insert character '/' between '$' and attribute -## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag -## or filename with reversed colors. -## -## If you want to use 256 colors and/or background colors in formats -## (the naming scheme is described below in section about color -## definitions), it can be done with the syntax $(COLOR), e.g. to set -## the artist tag to one of the non-standard colors and make it have -## yellow background, you need to write $(197_yellow)%a$(end). Note -## that for standard colors this is interchangable with attributes -## listed above. -## -## Note: colors can be nested. -## -# -#song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9} -# -#song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f} -# -#song_library_format = {%n - }{%t}|{%f} -# -# -#alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b -# -#alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D} -# -#now_playing_prefix = $b -# -#now_playing_suffix = $/b -# -#browser_playlist_prefix = "$2playlist$9 " -# -#selected_item_prefix = $6 -# -#selected_item_suffix = $9 -# -#modified_item_prefix = $3> $9 -# -## -## Note: attributes are not supported for the following variables. -## -#song_window_title_format = {%a - }{%t}|{%f} -## -## Note: Below variables are used for sorting songs in browser. -## The sort mode determines how songs are sorted, and can be used -## in combination with a sort format to specify a custom sorting format. -## Available values for browser_sort_mode are "name", "mtime", "format" -## and "noop". -## -# -#browser_sort_mode = name -# -#browser_sort_format = {%a - }{%t}|{%f} {(%l)} -# -##### columns settings ##### -## -## syntax of song columns list format is "column column etc." -## -## - syntax for each column is: -## -## (width of the column)[color of the column]{displayed tag} -## -## Note: Width is by default in %, if you want a column to -## have fixed size, add 'f' after the value, e.g. (10)[white]{a} -## will be the column that take 10% of screen (so the real width -## will depend on actual screen size), whereas (10f)[white]{a} -## will take 10 terminal cells, no matter how wide the screen is. -## -## - color is optional (if you want the default one, -## leave the field empty). -## -## Note: You can give a column additional attributes by putting appropriate -## character after displayed tag character. Available attributes are: -## -## - r - column will be right aligned -## - E - if tag is empty, empty tag marker won't be displayed -## -## You can also: -## -## - give a column custom name by putting it after attributes, -## separated with character ':', e.g. {lr:Length} gives you -## right aligned column of lengths named "Length". -## -## - define sequence of tags, that have to be displayed in case -## predecessor is empty in a way similar to the one in classic -## song format, i.e. using '|' character, e.g. {a|c|p:Owner} -## creates column named "Owner" that tries to display artist -## tag and then composer and performer if previous ones are -## not available. -## -# -#song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l} -# -##### various settings ##### -# -## -## Note: Custom command that will be executed each -## time song changes. Useful for notifications etc. -## -#execute_on_song_change = "" -# -#playlist_show_mpd_host = no -# -#playlist_show_remaining_time = no -# -#playlist_shorten_total_times = no -# -#playlist_separate_albums = no -# -## -## Note: Possible display modes: classic, columns. -## -#playlist_display_mode = columns -# -#browser_display_mode = classic -# -#search_engine_display_mode = classic -# -#playlist_editor_display_mode = classic -# -#discard_colors_if_item_is_selected = yes -# -#incremental_seeking = yes -# -#seek_time = 1 -# -#volume_change_step = 2 -# -#autocenter_mode = no -# -#centered_cursor = no -# -## -## Note: You can specify third character which will -## be used to build 'empty' part of progressbar. -## -#progressbar_look = => -progressbar_look = "─╼╶" -#progressbar_look = "─⊙╶" -# -#progressbar_boldness = yes -# -## Available values: database, playlist. -## -#default_place_to_search_in = database -# -## Available values: classic, alternative. -## -#user_interface = classic -# -#data_fetching_delay = yes -# -## Available values: artist, album_artist, date, genre, composer, performer. -## -#media_library_primary_tag = artist -# -## Available values: wrapped, normal. -## -#default_find_mode = wrapped -# -#default_tag_editor_pattern = %n - %t -# -#header_visibility = yes -# -#statusbar_visibility = yes -# -#titles_visibility = yes -# -#header_text_scrolling = yes -# -#cyclic_scrolling = no -# -#lines_scrolled = 2 -# -#follow_now_playing_lyrics = no -# -#fetch_lyrics_for_current_song_in_background = no -# -#store_lyrics_in_song_dir = no -# -#generate_win32_compatible_filenames = yes -# -#allow_for_physical_item_deletion = no -# -## -## Note: If you set this variable, ncmpcpp will try to -## get info from last.fm in language you set and if it -## fails, it will fall back to english. Otherwise it will -## use english the first time. -## -## Note: Language has to be expressed as an ISO 639 alpha-2 code. -## -#lastfm_preferred_language = en -# -#show_hidden_files_in_local_browser = no -# -## -## How shall screen switcher work? -## -## - "previous" - switch between the current and previous screen. -## - "screen1,...,screenN" - switch between given sequence of screens. -## -## Screens available for use: help, playlist, browser, search_engine, -## media_library, playlist_editor, tag_editor, outputs, visualizer, clock. -## -#screen_switcher_mode = playlist, browser -# -## -## Note: You can define startup screen -## by choosing screen from the list above. -## -#startup_screen = playlist -# -## -## Note: You can define startup slave screen -## by choosing screen from the list above or -## an empty value for no slave screen. -## -#startup_slave_screen = "" -# -#startup_slave_screen_focus = no -# -## -## Default width of locked screen (in %). -## Acceptable values are from 20 to 80. -## -# -#locked_screen_width_part = 50 -# -#ask_for_locked_screen_width_part = yes -# -#jump_to_now_playing_song_at_start = yes -# -#ask_before_clearing_playlists = yes -# -#clock_display_seconds = no -# -#display_volume_level = yes -# -#display_bitrate = no -# -#display_remaining_time = no -# -## Available values: none, basic, extended, perl. -## -#regular_expressions = perl -# -## -## Note: If below is enabled, ncmpcpp will ignore leading -## "The" word while sorting items in browser, tags in -## media library, etc. -## -#ignore_leading_the = no -# -#block_search_constraints_change_if_items_found = yes -# -#mouse_support = yes -# -#mouse_list_scroll_whole_page = yes -# -#empty_tag_marker = -# -#tags_separator = " | " -# -#tag_editor_extended_numeration = no -# -#media_library_sort_by_mtime = no -# -#enable_window_title = yes -# -## -## Note: You can choose default search mode for search -## engine. Available modes are: -## -## - 1 - use mpd built-in searching (no regexes, pattern matching) -## - 2 - use ncmpcpp searching (pattern matching with support for regexes, -## but if your mpd is on a remote machine, downloading big database -## to process it can take a while -## - 3 - match only exact values (this mode uses mpd function for searching -## in database and local one for searching in current playlist) -## -# -#search_engine_default_search_mode = 1 -# -#external_editor = nano -# -## Note: set to yes if external editor is a console application. -## -#use_console_editor = yes -# -##### colors definitions ##### -## -## It is possible to set a background color by setting a color -## value "_", e.g. red_black will set -## foregound color to red and background color to black. -## -## In addition, for terminals that support 256 colors it -## is possible to set one of them by using a number in range -## [1, 256] instead of color name, e.g. numerical value -## corresponding to red_black is 2_1. To find out if the -## terminal supports 256 colors, run ncmpcpp and check out -## the bottom of the help screen for list of available colors -## and their numerical values. -## -## Note: due to technical limitations of ncurses, if 256 colors -## are used, it is possible to either use only the colors with -## default background color, or all pairs from 1_1 up to 254_127, -## depending on the ncurses version used. -## -# -#colors_enabled = yes -# -#empty_tag_color = cyan -# -#header_window_color = default -# -#volume_color = default -# -#state_line_color = default -# -#state_flags_color = default -# -#main_window_color = yellow -# -#color1 = white -# -#color2 = green -# -#main_window_highlight_color = yellow -# -#progressbar_color = black -# -#progressbar_elapsed_color = green -# -#statusbar_color = default -# -#alternative_ui_separator_color = black -# -#active_column_color = red -# -#window_border_color = green -# -#active_window_border = red -# -#+end_src - -*** bindings -:PROPERTIES: -:header-args+: :tangle ~/.ncmpcpp/bindings -:END: - -#+begin_src conf :tangle no -def_key "j" - scroll_down -def_key "k" - scroll_up - -def_key "ctrl-u" - page_up -def_key "ctrl-d" - page_down - -def_key "h" - previous_column -def_key "l" - next_column - -def_key "." - show_lyrics - -def_key "n" - next_found_item -def_key "N" - previous_found_item - -def_key "J" - move_sort_order_down -def_key "K" - move_sort_order_up -#+end_src - -** notmuch - -*** notmuch-config -:PROPERTIES: -:header-args+: :tangle ~/.notmuch-config -:END: - -#+begin_src conf -# .notmuch-config - Configuration file for the notmuch mail system -# -# For more information about notmuch, see https://notmuchmail.org - -# Database configuration -# -# The only value supported here is 'path' which should be the top-level -# directory where your mail currently exists and to where mail will be -# delivered in the future. Files should be individual email messages. -# Notmuch will store its database within a sub-directory of the path -# configured here named ".notmuch". -# -[database] -path=/home/amin/oldmail - -# User configuration -# -# Here is where you can let notmuch know how you would like to be -# addressed. Valid settings are -# -# name Your full name. -# primary_email Your primary email address. -# other_email A list (separated by ';') of other email addresses -# at which you receive email. -# -# Notmuch will use the various email addresses configured here when -# formatting replies. It will avoid including your own addresses in the -# recipient list of replies, and will set the From address based on the -# address to which the original email was addressed. -# -[user] -name=Amin Bandali -primary_email=amin@aminb.org -other_email=bandali@gnu.org;abandali@uwaterloo.ca; - -# Configuration for "notmuch new" -# -# The following options are supported here: -# -# tags A list (separated by ';') of the tags that will be -# added to all messages incorporated by "notmuch new". -# -# ignore A list (separated by ';') of file and directory names -# that will not be searched for messages by "notmuch new". -# -# NOTE: *Every* file/directory that goes by one of those -# names will be ignored, independent of its depth/location -# in the mail store. -# -[new] -tags=new; -#tags=unread;inbox; -ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/ - -# Search configuration -# -# The following option is supported here: -# -# exclude_tags -# A ;-separated list of tags that will be excluded from -# search results by default. Using an excluded tag in a -# query will override that exclusion. -# -[search] -exclude_tags=deleted;spam; - -# Maildir compatibility configuration -# -# The following option is supported here: -# -# synchronize_flags Valid values are true and false. -# -# If true, then the following maildir flags (in message filenames) -# will be synchronized with the corresponding notmuch tags: -# -# Flag Tag -# ---- ------- -# D draft -# F flagged -# P passed -# R replied -# S unread (added when 'S' flag is not present) -# -# The "notmuch new" command will notice flag changes in filenames -# and update tags, while the "notmuch tag" and "notmuch restore" -# commands will notice tag changes and update flags in filenames -# -[maildir] -synchronize_flags=true - -# Cryptography related configuration -# -# The following option is supported here: -# -# gpg_path -# binary name or full path to invoke gpg. -# -[crypto] -gpg_path=gpg -#+end_src - -*** pre-new hook -:PROPERTIES: -:header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh" -:END: - -#+begin_src sh -touch /tmp/gnusieve.log -sieve-filter -eW -o postmaster_address=postmaster@aminb.org \ - -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log -#+end_src - -*** post-new hook -:PROPERTIES: -:header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh" -:END: - -#+begin_src sh -# apply sent tag to messages sent by me -notmuch tag -new +sent -- from:amin@aminb.org or from:bandali@gnu.org or from:aminb@gnu.org or from:amin@gnu.org or from:mab@gnu.org or from:abandali@uwaterloo.ca - -# initial tagging -notmuch tag -latest -- tag:latest -notmuch tag +inbox +unread +latest -new -- tag:new - - -# apply tags to lists - -# -notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter -notmuch tag -inbox +lists/haskell-weekly -- folder:amin/lists/haskell-weekly - -notmuch tag -inbox +pay -- folder:amin/pay -notmuch tag -inbox +banking -- folder:amin/banking -notmuch tag -inbox +work -- folder:amin/work -# - -# -notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136 -notmuch tag -inbox +uw/cs846 -- folder:uwaterloo/lists/cs846 -notmuch tag -inbox +uw/ece750 -- folder:uwaterloo/lists/ece750 -notmuch tag -inbox +uw/se212 -- folder:uwaterloo/lists/se212 -notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463 - -notmuch tag -inbox +lists/alloytools -- folder:uwaterloo/lists/alloytools -notmuch tag -inbox +lists/clvsingle -- folder:uwaterloo/lists/Clvsingle -notmuch tag -inbox +lists/gsa -- folder:uwaterloo/lists/GSA -notmuch tag -inbox +lists/math-grad -- folder:uwaterloo/lists/Math-grad -notmuch tag -inbox +lists/scs-grads -- folder:uwaterloo/lists/scs-grads -notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students -# - -# -notmuch tag -inbox +l/emacs-devel -- folder:gnu/l/emacs-devel -notmuch tag -inbox +l/emacs-orgmode -- folder:gnu/l/emacs-orgmode -notmuch tag -inbox +l/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss -notmuch tag -inbox +l/fencepost-users -- folder:gnu/l/fencepost-users -notmuch tag -inbox +l/guix-devel -- folder:gnu/l/guix-devel -notmuch tag -inbox +l/guile-devel -- folder:gnu/l/guile-devel -notmuch tag -inbox +l/help-gnu-emacs -- folder:gnu/l/help-gnu-emacs -notmuch tag -inbox +l/info-gnu-emacs -- folder:gnu/l/info-gnu-emacs -notmuch tag -inbox +l/www-commits -- folder:gnu/l/www-commits -notmuch tag -inbox +l/www-discuss -- folder:gnu/l/www-discuss -notmuch tag -inbox +webmasters -- folder:gnu/webmasters - -notmuch tag -inbox +l/deepspec -- folder:gnu/l/deepspec -notmuch tag -inbox +l/haskell-cafe -- folder:gnu/l/haskell-cafe -notmuch tag -inbox +l/haskell-art -- folder:gnu/l/haskell-art -notmuch tag -inbox +l/notmuch -- folder:gnu/l/notmuch - -notmuch tag -inbox +l/~aminb/test-priv -- folder:gnu/l/~aminb/test-priv -notmuch tag -inbox +l/~sircmpwn/sr.ht-admins -- folder:gnu/l/~sircmpwn/sr.ht-admins -notmuch tag -inbox +l/~sircmpwn/sr.ht-announce -- folder:gnu/l/~sircmpwn/sr.ht-announce -notmuch tag -inbox +l/~sircmpwn/sr.ht-dev -- folder:gnu/l/~sircmpwn/sr.ht-dev -notmuch tag -inbox +l/~sircmpwn/sr.ht-discuss -- folder:gnu/l/~sircmpwn/sr.ht-discuss -# - -notmuch tag -inbox -unread +archive/notmuch -- path:archive/notmuch/** -notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/** -#+end_src - -*** notmuch.service -:PROPERTIES: -:header-args+: :tangle ~/.config/systemd/user/notmuch.service -:END: - -#+begin_src conf :tangle no -[Unit] -Description=notmuch service - -[Service] -Type=oneshot -ExecStart=/usr/bin/notmuch new -StandardOutput=syslog -StandardError=syslog -#+end_src - -*** notmuch.timer -:PROPERTIES: -:header-args+: :tangle ~/.config/systemd/user/notmuch.timer -:END: - -#+begin_src conf :tangle no -[Unit] -Description=notmuch timer - -[Timer] -OnCalendar=*:0/5 -Persistent=true -Unit=notmuch.service - -[Install] -WantedBy=timers.target -#+end_src - -** pacman - -*** conf - -#+begin_src conf :tangle /sudo::/etc/pacman.conf :comments none -# -# /etc/pacman.conf -# -# See the pacman.conf(5) manpage for option and repository directives - -# -# GENERAL OPTIONS -# -[options] -# The following paths are commented out with their default values listed. -# If you wish to use different paths, uncomment and update the paths. -#RootDir = / -#DBPath = /var/lib/pacman/ -#CacheDir = /var/cache/pacman/pkg/ -#LogFile = /var/log/pacman.log -#GPGDir = /etc/pacman.d/gnupg/ -#HookDir = /etc/pacman.d/hooks/ -HoldPkg = pacman glibc -#XferCommand = /usr/bin/curl -L -C - -f -o %o %u -#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u -#CleanMethod = KeepInstalled -#UseDelta = 0.7 -Architecture = auto - -# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup -#IgnorePkg = -#IgnoreGroup = - -#NoUpgrade = -#NoExtract = - -# Misc options -#UseSyslog -Color -TotalDownload -CheckSpace -VerbosePkgLists - -# By default, pacman accepts packages signed by keys that its local keyring -# trusts (see pacman-key and its man page), as well as unsigned packages. -SigLevel = Required DatabaseOptional -LocalFileSigLevel = Optional -#RemoteFileSigLevel = Required - -# NOTE: You must run `pacman-key --init` before first using pacman; the local -# keyring can then be populated with the keys of all Arch/Parabola packagers -# with `pacman-key --populate archlinux` and `pacman-key --populate parabola`. - -# -# REPOSITORIES -# - can be defined here or included from another file -# - pacman will search repositories in the order defined here -# - local/custom mirrors can be added here or in separate files -# - repositories listed first will take precedence when packages -# have identical names, regardless of version number -# - URLs will have $repo replaced by the name of the current repo -# - URLs will have $arch replaced by the name of the architecture -# -# Repository entries are of the format: -# [repo-name] -# Server = ServerName -# Include = IncludePath -# -# The header [repo-name] is crucial - it must be present and -# uncommented to enable the repo. -# - -# The testing repositories are disabled by default. To enable, uncomment the -# repo name header and Include lines. You can add preferred servers immediately -# after the header, and they will be used before the default mirrors. - -# NOTE: Nonprism is a particular repository that aims to provide software built -# and patched without services under global data surveillance programs like PRISM, -# XKeyscore and Tempora. For more info see: https://wiki.parabola.nu/Nonprism - -#[nonprism-testing] -#Include = /etc/pacman.d/mirrorlist - -#[nonprism] -#Include = /etc/pacman.d/mirrorlist - -[libre-testing] -Include = /etc/pacman.d/mirrorlist - -[libre] -Include = /etc/pacman.d/mirrorlist - -#[testing] -#Include = /etc/pacman.d/mirrorlist - -[core] -Include = /etc/pacman.d/mirrorlist - -[extra] -Include = /etc/pacman.d/mirrorlist - -#[community-testing] -#Include = /etc/pacman.d/mirrorlist - -[community] -Include = /etc/pacman.d/mirrorlist - -# The PCR (Parabola Community Repository) contains packages maintained by trusted -# members of the Parabola community. It also contains packages maintained by -# Parabola developers, but that the developer decided didn't belong in core/libre. - -#[pcr-testing] -#Include = /etc/pacman.d/mirrorlist - -[pcr] -Include = /etc/pacman.d/mirrorlist - -# If you want to run 32 bit applications on your x86_64 system, -# enable the libre-multilib, multilib and pcr-multilib repositories as required here. - -#[nonprism-multilib-testing] -#Include = /etc/pacman.d/mirrorlist - -#[nonprism-multilib] -#Include = /etc/pacman.d/mirrorlist - -#[libre-multilib-testing] -#Include = /etc/pacman.d/mirrorlist - -#[libre-multilib] -#Include = /etc/pacman.d/mirrorlist - -#[multilib-testing] -#Include = /etc/pacman.d/mirrorlist - -#[multilib] -#Include = /etc/pacman.d/mirrorlist - -#[pcr-multilib-testing] -#Include = /etc/pacman.d/mirrorlist - -#[pcr-multilib] -#Include = /etc/pacman.d/mirrorlist - -# Parabola also supports another community projects and personal repositories, to -# find them check out this wiki page: https://wiki.parabola.nu/Repositories - -# An example of a custom package repository. See the pacman manpage for -# tips on creating your own repositories. -#[custom] -#SigLevel = Optional TrustAll -#Server = file:///home/custompkgs - -Include = /etc/pacman.d/*.conf -#+end_src - -*** mirrorlist - -#+begin_src conf :tangle /sudo::/etc/pacman.d/mirrorlist :comments none -# Parabola GNU/Linux-libre - Last Updated: Wed Dec 20 02:59:35 GMT 2017 - -Server = http://mirror.fsf.org/parabola/$repo/os/$arch -Server = http://mirror.fsf.org/parabola/$repo/os/$arch -Server = http://mirror.fsf.org/parabola/$repo/os/$arch -Server = http://mirror.fsf.org/parabola/$repo/os/$arch - -# Location: London, UK -# Responsible: Parabola Project -# Note: Not really a mirror, automatically redirects you to an Arch -# mirror when possible. Works best specifying it a few times in a -# row (404s workaround). -# Server = http://redirector.parabola.nu/$repo/os/$arch -Server = https://redirector.parabola.nu/$repo/os/$arch - -# Location: Reykjavík, Iceland -# Responsible: Parabola Project -# Note: Not really a mirror, automatically redirects you to a Parabola -# mirror that has the file you are looking for. -# Server = http://repomirror.parabola.nu/$repo/os/$arch -Server = https://repomirror.parabola.nu/$repo/os/$arch - -# Location: Falkenstein, Germany -# Server = http://mirror.grapentin.org/parabola/$repo/os/$arch -Server = https://mirror.grapentin.org/parabola/$repo/os/$arch - -# Location: Volendam, Netherlands -Server = https://jeweet.net/repo/parabola/$repo/os/$arch - -# Location: Amsterdam, Netherlands -# Note: Not really a mirror, but a high-speed 10GiB cache for -# mirror.yandex.ru/mirrors/parabola -# Server = http://parabola.isacdaavid.info:8080/$repo/os/$arch -Server = https://parabola.isacdaavid.info:8081/$repo/os/$arch - -# Location: Moscow, Russian Federation -# Server = http://mirror.yandex.ru/mirrors/parabola/$repo/os/$arch -Server = https://mirror.yandex.ru/mirrors/parabola/$repo/os/$arch - -# Location: Ho Chi Minh City, Vietnam -# Server = http://mirror.freedif.org/Parabola/$repo/os/$arch -Server = https://mirror.freedif.org/Parabola/$repo/os/$arch - -# Location: Los Angeles, CA, USA -# Note: Also visit http://alfplayer.com/ for its SNAPSHOTS ARCHIVE -Server = http://alfplayer.com/parabola/$repo/os/$arch - -# Location: Boston, MA, USA -Server = http://mirror.fsf.org/parabola/$repo/os/$arch - -# Location: Austin, TX, USA -# Server = http://parabola.serverpit.com/ -Server = https://parabola.serverpit.com/ - -# Location: Reykjavík, Iceland -# Responsible: Parabola Project -# Note: Currently pointing to repomirror.parabola.nu -# Server = http://repo.parabola.nu/$repo/os/$arch -Server = https://repo.parabola.nu/$repo/os/$arch -#+end_src - -** pigeonhole -*** amin.sieve -:PROPERTIES: -:header-args+: :tangle ~/mail/aminb.org/amin/sieve/amin.sieve :comments none -:END: - -#+begin_src conf -require ["regex", "variables", "fileinto", "envelope", - "mailbox", "imap4flags", "include"]; - -# webmasters -if anyof ( - address :is "from" ["webmasters@gnu.org", "webmasters-comment@gnu.org"]) { - fileinto :create "gnu.webmasters"; - stop; -} - -include :personal "lists"; -#+end_src - -*** lists.sieve -:PROPERTIES: -:header-args+: :tangle ~/mail/aminb.org/amin/sieve/lists.sieve :comments none -:END: - -#+begin_src conf -require ["regex", "variables", "fileinto", "envelope", - "mailbox", "imap4flags", "include"]; - -# mailing lists -if anyof ( - header :contains "list-id" - [ "" - , "" - , "" - , "" - , "" - , "" - , "" - , "" - , "" - , "" - , "" - , "" - , "" - , "" - , "" - ] ) { - if header :regex "list-id" "<([a-z_0-9-]+)[.@]" { - set :lower "listname" "${1}"; - fileinto :create "gnu.${listname}"; - stop; - } -} - -# sr.ht lists, with dots ('.') omitted -if anyof ( - header :contains "list-id" - [ "<~bandali/public-inbox@lists.sr.ht>" - , "<~sircmpwn/sr.ht-admins@lists.sr.ht>" - , "<~sircmpwn/sr.ht-announce@lists.sr.ht>" - , "<~sircmpwn/sr.ht-dev@lists.sr.ht>" - , "<~sircmpwn/sr.ht-discuss@lists.sr.ht>" - ] ) { - if header :regex "list-id" "(~[a-z_0-9-]+)/([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)@" { - set :lower "username" "${1}"; - set :lower "listname" "${2}${3}${4}${5}${6}${7}"; - fileinto :create "gnu.${username}.${listname}"; - stop; - } -} -#+end_src - -** PowerTOP -:PROPERTIES: -:header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service" -:END: - -#+begin_src conf -[Unit] -Description=Powertop tunings - -[Service] -ExecStart=/usr/bin/powertop --auto-tune -RemainAfterExit=true - -[Install] -WantedBy=multi-user.target -#+end_src - -** redshift -:PROPERTIES: -:header-args+: :tangle ~/.config/redshift.conf :comments none -:END: - -#+begin_src conf -; Global settings for redshift -[redshift] -; Set the day and night screen temperatures (Neutral is 6500K) -;temp-day=5700 -;temp-night=3500 - -;temp-day=6500 -temp-day=6200 -;temp-night=4800 -;temp-night=5000 -;temp-night=4500 -temp-night=4000 - -; Enable/Disable a smooth transition between day and night -; 0 will cause a direct change from day to night screen temperature. -; 1 will gradually increase or decrease the screen temperature. -transition=1 - -; Set the screen brightness. Default is 1.0. -;brightness=0.9 -; It is also possible to use different settings for day and night -; since version 1.8. -;brightness-day=0.7 -;brightness-night=0.4 -; Set the screen gamma (for all colors, or each color channel -; individually) -;gamma=0.8 -;gamma=1.0 -;gamma=0.8:0.7:0.8 -; This can also be set individually for day and night since -; version 1.10. -;gamma-day=0.8:0.7:0.8 -;gamma-night=0.6 - -; Set the location-provider: 'geoclue2' or 'manual' -; type 'redshift -l list' to see possible values. -; The location provider settings are in a different section. -;location-provider=manual -location-provider=geoclue2 - -; Set the adjustment-method: 'randr', 'vidmode' -; type 'redshift -m list' to see all possible values. -; 'randr' is the preferred method, 'vidmode' is an older API. -; but works in some cases when 'randr' does not. -; The adjustment method settings are in a different section. -adjustment-method=randr - -; Configuration of the location-provider: -; type 'redshift -l PROVIDER:help' to see the settings. -; ex: 'redshift -l manual:help' -; Keep in mind that longitudes west of Greenwich (e.g. the Americas) -; are negative numbers. -;[manual] -;lat=48.1 -;lon=11.6 - -; Configuration of the adjustment-method -; type 'redshift -m METHOD:help' to see the settings. -; ex: 'redshift -m randr:help' -; In this example, randr is configured to adjust screen 1. -; Note that the numbering starts from 0, so this is actually the -; second screen. If this option is not specified, Redshift will try -; to adjust _all_ screens. -;[randr] -;screen=1 -#+end_src - -** rofi -:PROPERTIES: -:header-args+: :tangle ~/.config/rofi/config +:header-args+: :tangle ~/.config/rofi/config :END: #+begin_src conf @@ -2674,11 +1198,7 @@ rofi.width: 600 rofi.monitor: -1 !rofi.lines: 10 -!rofi.theme: /usr/share/rofi/themes//Arc.rasi -!rofi.theme: /usr/share/rofi/themes//Paper.rasi -!rofi.theme: /usr/share/rofi/themes//sidebar.rasi - -rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi +rofi.theme: ~/.guix-profile/share/rofi/themes/gruvbox-light-hard.rasi #+end_src ** rofi-pass @@ -2763,689 +1283,399 @@ switch="Alt+x" insert_pass="Alt+n" #+end_src -** sway - -*** main +** Screen :PROPERTIES: -:header-args+: :tangle ~/.config/sway/config +:header-args+: :tangle ~/.config/screen/screenrc :END: -#+begin_src conf -### Variables -# super -set $mod Mod4 -# alt -set $mod2 Mod1 -set $left h -set $down j -set $up k -set $right l -set $term urxvt -set $menu rofi -show run -display-run '> ' -display-window ' 🗔 ' - -### Output configuration -# -# Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/) -output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill -# -# Example configuration: -# -# output HDMI-A-1 resolution 1920x1080 position 1920,0 -# -# You can get the names of your outputs by running: swaymsg -t get_outputs - -### Idle configuration - -exec swayidle \ - timeout 120 '[ -f ~/.nosleep ] || swaymsg "output * dpms off"' \ - resume '[ -f ~/.nosleep ] || swaymsg "output * dpms on"' \ - - -### Key bindings -# -# Basics: -# - # start a terminal - bindsym $mod+Return exec $term -name floating - bindsym $mod+Shift+Return exec $term - for_window [class="URxvt" instance="floating"] floating enable - - # kill focused window - bindsym $mod+Shift+q kill - - # start your launcher - bindsym $mod+d exec $menu - - # password manager - bindsym $mod2+space exec rofi-pass - - # Drag floating windows by holding down $mod and left mouse button. - # Resize them with right mouse button + $mod. - # Despite the name, also works for non-floating windows. - # Change normal to inverse to use left mouse button for resizing and right - # mouse button for dragging. - floating_modifier $mod normal - - # reload the configuration file - bindsym $mod+Shift+c reload - - # exit sway (logs you out of your wayland session) - # bindsym $mod+Shift+e exit - - bindsym $mod+apostrophe exec rofi-light # rofi-based brightness chooser - bindsym XF86MonBrightnessUp exec light -A 5 # increase screen brightness - bindsym XF86MonBrightnessDown exec light -U 5 # decrease screen brightness - - bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5 - bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5 - bindsym XF86AudioMute exec pamixer --toggle-mute - bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle - - bindsym $mod+Shift+apostrophe exec rofi-remmina.py # choose remmina connection - - # original sway workspace switch and window move - bindsym $mod+bracketleft workspace prev - bindsym $mod+bracketright workspace next - bindsym $mod+braceleft move container to workspace prev - bindsym $mod+braceright move container to workspace next - - # bspwm-esque workspace switch and window move - bindsym $mod2+bracketleft exec sway-ws-util switch prev - bindsym $mod2+bracketright exec sway-ws-util switch next - bindsym $mod2+braceleft exec sway-ws-util move prev follow - bindsym $mod2+braceright exec sway-ws-util move next follow -# -# Moving around: -# - # Move your focus around - bindsym $mod+$left focus left - bindsym $mod+$down focus down - bindsym $mod+$up focus up - bindsym $mod+$right focus right - # or use $mod+[up|down|left|right] - bindsym $mod+Left focus left - bindsym $mod+Down focus down - bindsym $mod+Up focus up - bindsym $mod+Right focus right - - # _move_ the focused window with the same, but add Shift - bindsym $mod+Shift+$left move left - bindsym $mod+Shift+$down move down - bindsym $mod+Shift+$up move up - bindsym $mod+Shift+$right move right - # ditto, with arrow keys - bindsym $mod+Shift+Left move left - bindsym $mod+Shift+Down move down - bindsym $mod+Shift+Up move up - bindsym $mod+Shift+Right move right -# -# Workspaces: -# - # switch to workspace - bindsym $mod+1 workspace 1 - bindsym $mod+2 workspace 2 - bindsym $mod+3 workspace 3 - bindsym $mod+4 workspace 4 - bindsym $mod+5 workspace 5 - bindsym $mod+6 workspace 6 - bindsym $mod+7 workspace 7 - bindsym $mod+8 workspace 8 - bindsym $mod+9 workspace 9 - bindsym $mod+0 workspace 10 - # move focused container to workspace - bindsym $mod+Shift+1 move container to workspace 1 - bindsym $mod+Shift+2 move container to workspace 2 - bindsym $mod+Shift+3 move container to workspace 3 - bindsym $mod+Shift+4 move container to workspace 4 - bindsym $mod+Shift+5 move container to workspace 5 - bindsym $mod+Shift+6 move container to workspace 6 - bindsym $mod+Shift+7 move container to workspace 7 - bindsym $mod+Shift+8 move container to workspace 8 - bindsym $mod+Shift+9 move container to workspace 9 - bindsym $mod+Shift+0 move container to workspace 10 - # Note: workspaces can have any name you want, not just numbers. - # We just use 1-10 as the default. -# -# Layout stuff: -# - # You can "split" the current object of your focus with - # $mod+b or $mod+v, for horizontal and vertical splits - # respectively. - bindsym $mod+b splith - bindsym $mod+v splitv - - # Switch the current container between different layout styles - bindsym $mod+s layout stacking - bindsym $mod+w layout tabbed - bindsym $mod+e layout toggle split - - # Make the current focus fullscreen - bindsym $mod+f fullscreen +#+begin_src screen +startup_message off +caption always "%{= kc}GNU Screen $USER@%H (load: %l)%-28=%{= .m}%D %d.%m.%Y %0c" +#+end_src - # Toggle sticky-ness of the current (floating) window - bindsym $mod+$mod2+space sticky toggle +** Shell - # Toggle the current focus between tiling and floating mode - bindsym $mod+Shift+space floating toggle +*** GNU Bash +:PROPERTIES: +:header-args+: :tangle ~/.bashrc +:END: - # Swap focus between the tiling area and the floating area - bindsym $mod+space focus mode_toggle +#+begin_src bash +# Bash initialization for interactive non-login shells and +# for remote shells (info "(bash) Bash Startup Files"). - # move focus to the parent container - bindsym $mod+a focus parent -# -# Scratchpad: -# - # Sway has a "scratchpad", which is a bag of holding for windows. - # You can send windows there and get them back later. +# Export 'SHELL' to child processes. Programs such as 'screen' +# honor it and otherwise use /bin/sh. +export SHELL - # Move the currently focused window to the scratchpad - bindsym $mod+Shift+minus move scratchpad +if [[ $- != *i* ]] +then + # We are being invoked from a non-interactive shell. If this + # is an SSH session (as in "ssh host command"), source + # /etc/profile so we get PATH and other essential variables. + [[ -n "$SSH_CLIENT" ]] && source /etc/profile - # Show the next scratchpad window or hide the focused scratchpad window. - # If there are multiple scratchpad windows, this command cycles through them. - bindsym $mod+minus scratchpad show -# -# Resizing containers: -# -mode "resize" { - # left will shrink the containers width - # right will grow the containers width - # up will shrink the containers height - # down will grow the containers height - bindsym $left resize shrink width 10px - bindsym $down resize grow height 10px - bindsym $up resize shrink height 10px - bindsym $right resize grow width 10px - - # ditto, with arrow keys - bindsym Left resize shrink width 10px - bindsym Down resize grow height 10px - bindsym Up resize shrink height 10px - bindsym Right resize grow width 10px - - # return to default mode - bindsym Return mode "default" - bindsym Escape mode "default" -} -bindsym $mod+Shift+r mode "resize" + # Don't do anything else. + return +fi -# -# Power button -# +if [ -n "$IS_GUIX_SYSTEM" ]; then + # Source the system-wide file. + source /etc/bashrc +fi -set $mode_system System (l)ock, (e)xit sway, (s)uspend, (h)ibernate, (r)eboot, (S)hutdown -mode "$mode_system" { - bindsym l exec swaylock, mode "default" - bindsym e exec swaymsg exit, mode "default" - bindsym s exec systemctl suspend, mode "default" - bindsym h exec systemctl hibernate, mode "default" - bindsym r exec systemctl reboot, mode "default" - bindsym Shift+s exec systemctl poweroff -i, mode "default" - - # back to normal: Enter, Escape, or q - bindsym Return mode "default" - bindsym Escape mode "default" - bindsym q mode "default" +# from https://unix.stackexchange.com/a/55935 +b_prompt() { + cwd=$(sed -e "s:$HOME:~:" -e "s:\(\.\?[^/]\)[^/]*/:\1/:g" <<<$PWD) + printf $cwd } -# bindsym XF86PowerOff mode "$mode_system" -bindsym $mod+Shift+e mode "$mode_system" - -# -# Presentation mode -# -bindsym $mod+$mod2+p exec ([ ! -e ~/.nosleep ] && touch ~/.nosleep || rm ~/.nosleep) && killall -USR1 i3status - -# -# Notifications -# - -bindsym $mod+Shift+n mode notifications -mode notifications { - bindsym Return exec makoctl invoke; exec makoctl dismiss; mode default - bindsym d exec makoctl dismiss; mode default - bindsym Shift+d exec makoctl dismiss -a; mode default +if [ $(id -u) == "0" ]; then + PS1='`printf "\[\e[1;31m\]\$\[\e[00m\]"` ' +else + PS1='\$ ' +fi +PS1="\u@\h:\w/`[ -n "$GUIX_ENVIRONMENT" ] && printf \" [env]\"`\n$PS1" - bindsym Escape mode default - bindsym q mode default -} +# set terminal title +PROMPT_COMMAND='echo -ne "\033]0;${USER}@${HOSTNAME}: $(b_prompt)\007"' -# -# Screenshotting -# +# i-beam cursor +# echo -e "\033[5 q" # blinking +echo -e "\033[6 q" # non-blinking + +# various bash tweaks +# append to the history file, don't overwrite it +shopt -s histappend +shopt -s cmdhist +# check the window size after each command and, if necessary, +# update the values of LINES and COLUMNS. +shopt -s checkwinsize +# If set, the pattern "**" used in a pathname expansion context will +# match all files and zero or more directories and subdirectories. +#shopt -s globstar +# for setting history length see HISTSIZE and HISTFILESIZE in bash(1) +HISTSIZE= +HISTFILESIZE= +# don't put duplicate lines or lines starting with space in the +# history. +HISTCONTROL=ignoreboth +# ignore a few very common commands and don't add them to history +HISTIGNORE='ls:l:s:g:[bf]g:history' +HISTTIMEFORMAT='%F %T ' +stty stop "" -bindsym $mod+Shift+s mode screenshot -mode screenshot { - bindsym a exec grim $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default - bindsym r exec slurp | grim -g - $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default +# aliases +alias ls='ls -p --color=auto' +alias l='ls -lh' # long format and human-readable sizes +alias ll='l -A' # long format, all files +alias dir='dir --color=auto' +alias vdir='vdir --color=auto' +alias grep='grep --color=auto' +alias fgrep='fgrep --color=auto' +alias egrep='egrep --color=auto' +alias mpv="mpv --ytdl-format mp4" +alias mv="mv -iv" +alias cp="cp -iv" +alias mbsync='mbsync -c "$XDG_CONFIG_HOME"/isync/mbsyncrc' +alias getmail='getmail --getmaildir "$XDG_CONFIG_HOME"/getmail --rcfile getmailrc' +alias m="mbsync csclub; mbsync uwaterloo; mbsync shemshak; mbsync gnub" +alias best="youtube-dl -f best" +alias e="$EDITOR" +alias se="SUDO_EDITOR=\"emacsclient\" sudo -e" - bindsym Escape mode default - bindsym q mode default +aur() { + cd ~/usr/builds + [ -d ${1} ] || git clone https://aur.archlinux.org/${1}.git + cd ${1} } -# -# Window configurations -# -for_window [class="mpv"] floating enable -for_window [class="TelegramDesktop"] floating enable -for_window [app_id="pavucontrol"] floating enable -for_window [app_id="meld"] floating enable -for_window [app_id="nm-connection-editor"] floating enable - -# -# Status Bar: -# -# Read `man 5 sway-bar` for more information about this section. -bar { - position bottom - colors { - statusline #ffffff - background #212121 - inactive_workspace #21212100 #21212100 #5c5c5c - } - status_command i3status | my-i3status.py +function t { + cd $(mktemp -d /tmp/$1.XXXX) } -# font pango: benis uushi 9 -# font pango: Ubuntu Mono 11 -# font pango: Inconsolata 11 -font pango: DejaVu Sans Mono 9 -# font pango: Liberation Mono 9 - -exec xrdb .Xresources -# exec pgrep -x "systemd-inhibit" || \ -# systemd-inhibit --what=handle-power-key --who=aminb \ -# --why="Handle power button in sway" sleep infinity -exec mako 2>&1 >/tmp/mako.log -exec /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1 - -include /etc/sway/config.d/* -include ~/.config/sway/`hostname` - -exec systemd-notify --ready || true - -#+end_src - -*** langa -:PROPERTIES: -:header-args+: :tangle ~/.config/sway/langa -:END: +# separate alias definitions file, if exists +if [ -f ~/.bash_aliases ]; then + . ~/.bash_aliases +fi -#+begin_src conf -input "2:7:SynPS/2_Synaptics_TouchPad" { - events disabled - dwt enabled - tap enabled - natural_scroll enabled - click_method clickfinger -} +# enable programmable completion features (not needed if already +# enabled in /etc/bash.bashrc and if /etc/profile sources +# /etc/bash.bashrc). +if ! shopt -oq posix; then + if [ -f /usr/share/bash-completion/bash_completion ]; then + . /usr/share/bash-completion/bash_completion + elif [ -f /etc/bash_completion ]; then + . /etc/bash_completion + fi +fi -input "1:1:AT_Translated_Set_2_keyboard" { - repeat_delay 200 - repeat_rate 45 - xkb_layout us_ab,ir - xkb_options ctrl:nocaps,altwin:swap_alt_win,grp:shifts_toggle -} +# source Guix shell config dirs, for vte.sh and bash completions +GUIX_PROFILES=("${HOME}/.guix-profile" + "${HOME}/.config/guix/current") +for profile in "${GUIX_PROFILES[@]}"; do + for dir in "${profile}/etc/bash_completion.d" "${profile}/etc/profile.d"; do + if [ -d "${dir}" ]; then + for f in "${dir}"/*; do + . $f + done + fi + done +done #+end_src -*** shemshak +*** profile :PROPERTIES: -:header-args+: :tangle ~/.config/sway/shemshak +:header-args+: :tangle ~/.profile :END: -#+begin_src conf -input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" { - dwt enabled - tap enabled - natural_scroll enabled - middle_emulation enabled - click_method clickfinger -} - -input "1:1:AT_Translated_Set_2_keyboard" { - repeat_delay 200 - repeat_rate 45 - xkb_layout us,ir - xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle -} -#+end_src -** swaylock -:PROPERTIES: -:header-args+: :tangle ~/.config/swaylock/config -:END: - -#+begin_src conf -image=/home/amin/usr/pics/wp/wp2445784-blurred-wallpapers.jpg -scaling=fill -#+end_src -** systemd - -Keep boot messages on tty1 (see [[https://wiki.archlinux.org/index.php/getty#Have_boot_messages_stay_on_tty1][here]]) - -#+begin_src conf :tangle /sudo::/etc/systemd/system/getty@tty1.service.d/noclear.conf -[Service] -TTYVTDisallocate=no -#+end_src - -** TLP - -*** langa - -#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "langa")) "/sudo::/etc/default/tlp") -# ------------------------------------------------------------------------------ -# tlp - Parameters for power saving -# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html - -# Hint: some features are disabled by default, remove the leading # to enable -# them. - -# Set to 0 to disable, 1 to enable TLP. -TLP_ENABLE=1 - -# Operation mode when no power supply can be detected: AC, BAT. -# Concerns some desktop and embedded hardware only. -TLP_DEFAULT_MODE=AC - -# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE -# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC. -TLP_PERSISTENT_DEFAULT=0 - -# Seconds laptop mode has to wait after the disk goes idle before doing a sync. -# Non-zero value enables, zero disables laptop mode. -DISK_IDLE_SECS_ON_AC=0 -DISK_IDLE_SECS_ON_BAT=2 - -# Dirty page values (timeouts in secs). -MAX_LOST_WORK_SECS_ON_AC=15 -MAX_LOST_WORK_SECS_ON_BAT=60 - -# Hint: CPU parameters below are disabled by default, remove the leading # -# to enable them, otherwise kernel default values are used. - -# Select a CPU frequency scaling governor. -# Intel Core i processor with intel_pstate driver: -# powersave(*), performance. -# Older hardware with acpi-cpufreq driver: -# ondemand(*), powersave, performance, conservative, schedutil. -# (*) is recommended. -# Hint: use tlp-stat -p to show the active driver and available governors. -# Important: -# powersave for intel_pstate and ondemand for acpi-cpufreq are power -# efficient for *almost all* workloads and therefore kernel and most -# distributions have chosen them as defaults. If you still want to change, -# you should know what you're doing! You *must* disable your distribution's -# governor settings or conflicts will occur. -#CPU_SCALING_GOVERNOR_ON_AC=powersave -#CPU_SCALING_GOVERNOR_ON_BAT=powersave - -# Set the min/max frequency available for the scaling governor. -# Possible values strongly depend on your CPU. For available frequencies see -# the output of tlp-stat -p. -#CPU_SCALING_MIN_FREQ_ON_AC=0 -#CPU_SCALING_MAX_FREQ_ON_AC=0 -#CPU_SCALING_MIN_FREQ_ON_BAT=0 -#CPU_SCALING_MAX_FREQ_ON_BAT=0 - -# Set energy performance hints (HWP) for Intel P-state governor: -# performance, balance_performance, default, balance_power, power -# Values are given in order of increasing power saving. -# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required. -CPU_HWP_ON_AC=balance_performance -CPU_HWP_ON_BAT=balance_power - -# Set Intel P-state performance: 0..100 (%). -# Limit the max/min P-state to control the power dissipation of the CPU. -# Values are stated as a percentage of the available performance. -# Requires an Intel Core i processor with intel_pstate driver. -#CPU_MIN_PERF_ON_AC=0 -#CPU_MAX_PERF_ON_AC=100 -#CPU_MIN_PERF_ON_BAT=0 -#CPU_MAX_PERF_ON_BAT=30 - -# Set the CPU "turbo boost" feature: 0=disable, 1=allow -# Requires an Intel Core i processor. -# Important: -# - This may conflict with your distribution's governor settings -# - A value of 1 does *not* activate boosting, it just allows it -#CPU_BOOST_ON_AC=1 -#CPU_BOOST_ON_BAT=0 - -# Minimize number of used CPU cores/hyper-threads under light load conditions: -# 0=disable, 1=enable. -SCHED_POWERSAVE_ON_AC=0 -SCHED_POWERSAVE_ON_BAT=1 - -# Kernel NMI Watchdog: -# 0=disable (default, saves power), 1=enable (for kernel debugging only). -NMI_WATCHDOG=0 - -# Change CPU voltages aka "undervolting" - Kernel with PHC patch required. -# Frequency voltage pairs are written to: -# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls -# CAUTION: only use this, if you thoroughly understand what you are doing! -#PHC_CONTROLS="F:V F:V F:V F:V" - -# Set CPU performance versus energy savings policy: -# performance, balance-performance, default, balance-power, power. -# Values are given in order of increasing power saving. -# Requires kernel module msr and x86_energy_perf_policy from linux-tools. -ENERGY_PERF_POLICY_ON_AC=performance -ENERGY_PERF_POLICY_ON_BAT=balance-power - -# Disk devices; separate multiple devices with spaces (default: sda). -# Devices can be specified by disk ID also (lookup with: tlp diskid). -DISK_DEVICES="sda sdb" - -# Disk advanced power management level: 1..254, 255 (max saving, min, off). -# Levels 1..127 may spin down the disk; 255 allowable on most drives. -# Separate values for multiple disks with spaces. Use the special value 'keep' -# to keep the hardware default for the particular disk. -DISK_APM_LEVEL_ON_AC="254 254" -DISK_APM_LEVEL_ON_BAT="128 128" - -# Hard disk spin down timeout: -# 0: spin down disabled -# 1..240: timeouts from 5s to 20min (in units of 5s) -# 241..251: timeouts from 30min to 5.5 hours (in units of 30min) -# See 'man hdparm' for details. -# Separate values for multiple disks with spaces. Use the special value 'keep' -# to keep the hardware default for the particular disk. -#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0" -#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0" - -# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq). -# Separate values for multiple disks with spaces. Use the special value 'keep' -# to keep the kernel default scheduler for the particular disk. -#DISK_IOSCHED="cfq cfq" +#+begin_src sh +# ~/.profile: executed by the command interpreter for login shells. +# This file is not read by bash(1), if ~/.bash_profile or ~/.bash_login +# exists. -# AHCI link power management (ALPM) for disk devices: -# min_power, med_power_with_dipm(*), medium_power, max_performance. -# (*) Kernel >= 4.15 required, then recommended. -# Multiple values separated with spaces are tried sequentially until success. -SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance" -SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power" +# source host-specific profile +if [ -f "$HOME/.config/profiles/$(hostname)" ]; then + . "$HOME/.config/profiles/$(hostname)" +fi -# Exclude host devices from AHCI link power management. -# Separate multiple hosts with spaces. -#SATA_LINKPWR_BLACKLIST="host1" +export EDITOR="emacsclient -nw" +export VISUAL="emcl" -# Runtime Power Management for AHCI host and disks devices: -# on=disable, auto=enable. -# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss. -#AHCI_RUNTIME_PM_ON_AC=on -#AHCI_RUNTIME_PM_ON_BAT=on +PATH="$HOME/usr/local/bin:$HOME/.local/bin:$PATH" +PATH="$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH" +if [ -z "$IS_GUIX_SYSTEM" ]; then + PATH="$HOME/.config/guix/current/bin${PATH:+:}$PATH" + INFOPATH="$HOME/.config/guix/current/share/info${INFOPATH:+:}$INFOPATH" + export GUIX_LOCPATH="$HOME/.guix-profile/lib/locale" +fi +export PATH +export INFOPATH -# Seconds of inactivity before disk is suspended. -AHCI_RUNTIME_PM_TIMEOUT=15 +export MY_GUIX_MANIFESTS="$HOME/.config/guix/manifest" +export MY_GUIX_PROFILES="$HOME/.config/guix/profile" -# PCI Express Active State Power Management (PCIe ASPM): -# default, performance, powersave. -PCIE_ASPM_ON_AC=performance -PCIE_ASPM_ON_BAT=powersave +export XDG_CONFIG_HOME="$HOME/.config" +export XDG_DATA_HOME="$HOME/.local/share" -# Radeon graphics clock speed (profile method): low, mid, high, auto, default; -# auto = mid on BAT, high on AC; default = use hardware defaults. -RADEON_POWER_PROFILE_ON_AC=high -RADEON_POWER_PROFILE_ON_BAT=low +if [ -f "$HOME/.config/user-dirs.dirs" ]; then + set -a + . "$HOME/.config/user-dirs.dirs" + set +a +fi -# Radeon dynamic power management method (DPM): battery, performance. -RADEON_DPM_STATE_ON_AC=performance -RADEON_DPM_STATE_ON_BAT=battery +export INPUTRC="$XDG_CONFIG_HOME"/readline/inputrc +export SCREENRC="$XDG_CONFIG_HOME"/screen/screenrc -# Radeon DPM performance level: auto, low, high; auto is recommended. -RADEON_DPM_PERF_LEVEL_ON_AC=auto -RADEON_DPM_PERF_LEVEL_ON_BAT=auto +export MAILDIR="$HOME/mail" +export CVS_RSH="ssh" -# WiFi power saving mode: on=enable, off=disable; not supported by all adapters. -WIFI_PWR_ON_AC=off -WIFI_PWR_ON_BAT=on +if [ -x "$(command -v go)" ]; then + export GOPATH="$HOME/src/go" + export PATH="$GOPATH/bin:$PATH" +fi -# Disable wake on LAN: Y/N. -WOL_DISABLE=Y +# if running bash +if [ -n "$BASH_VERSION" ]; then + # include .bashrc if it exists + if [ -f "$HOME/.bashrc" ]; then + . "$HOME/.bashrc" + fi +fi -# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs). -# A value of 0 disables, >=1 enables power saving (recommended: 1). -SOUND_POWER_SAVE_ON_AC=0 -SOUND_POWER_SAVE_ON_BAT=0 +if [ -z "$IS_GUIX_SYSTEM" ]; then + # if guix is installed + if [ -x "$(command -v guix)" ]; then + SSL_CERT_DIR="$HOME/.guix-profile/etc/ssl/certs" + if [ -d "$SSL_CERT_DIR" -o -h "$SSL_CERT_DIR" ]; then + export SSL_CERT_DIR + export SSL_CERT_FILE="$HOME/.guix-profile/etc/ssl/certs/ca-certificates.crt" + else + printf "it seems you forgot to \`guix install nss-certs\'\n" + fi + GUIX_PROFILE="$HOME/.guix-profile" + . "$GUIX_PROFILE/etc/profile" + unset XDG_DATA_DIRS + fi +fi -# Disable controller too (HDA only): Y/N. -SOUND_POWER_SAVE_CONTROLLER=N +for p in $MY_GUIX_PROFILES/*; do + profile=$p/$(basename "$p") + if [ -f "$profile"/etc/profile ]; then + GUIX_PROFILE="$profile" + . "$GUIX_PROFILE"/etc/profile + fi + unset profile +done -# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable. -# Drive can be powered on again by releasing (and reinserting) the eject lever -# or by pressing the disc eject button on newer models. -# Note: an UltraBay/MediaBay hard disk is never powered off. -BAY_POWEROFF_ON_AC=0 -BAY_POWEROFF_ON_BAT=0 -# Optical drive device to power off (default sr0). -BAY_DEVICE="sr0" +# start an ssh-agent (with guix's openssh) +if [ -z "$IS_GUIX_SYSTEM" ]; then + if ! pgrep -u "$USER" ssh-agent > /dev/null; then + ssh-agent > ~/.ssh-agent-thing + fi + if [[ ! "$SSH_AUTH_SOCK" ]]; then + eval "$(<~/.ssh-agent-thing)" + fi +fi -# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable. -RUNTIME_PM_ON_AC=on -RUNTIME_PM_ON_BAT=auto +# footenote: when on a foreign distro and using Xfce, don't forget to +# disable its auto-start of gpg- and ssh-agent, by issuing +# xfconf-query -c xfce4-session -p /startup/ssh-agent/enabled -n -t bool -s false +# xfconf-query -c xfce4-session -p /startup/gpg-agent/enabled -n -t bool -s false +# see https://docs.xfce.org/xfce/xfce4-session/advanced#ssh_and_gpg_agents +# also, MATE does something similar with gnome-keyring-daemon: +# http://william.shallum.net/random-notes/disabling-gnome-keyring-daemon-ssh-agent-on-mate-desktop +#+end_src -# Exclude PCI(e) device adresses the following list from Runtime PM -# (separate with spaces). Use lspci to get the adresses (1st column). -#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6" +*** per-host profiles -# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM. -# Default when unconfigured is "amdgpu nouveau nvidia radeon" which -# prevents accidential power-on of dGPU in hybrid graphics setups. -# Use "" to disable the feature completely. -# Separate multiple drivers with spaces. -#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon" +Host-specific profiles, sourced from =~/.profile=. Each +=~/.config/profiles/HOST= file will be sourced on the machine with +=hostname= of =HOST=. -# Set to 0 to disable, 1 to enable USB autosuspend feature. -USB_AUTOSUSPEND=1 +**** chaman +:PROPERTIES: +:header-args+: :tangle ~/.config/profiles/chaman +:END: -# Exclude listed devices from USB autosuspend (separate with spaces). -# Use lsusb to get the ids. -# Note: input devices (usbhid) are excluded automatically -#USB_BLACKLIST="1111:2222 3333:4444" +#+begin_src sh +export IS_GUIX_SYSTEM=true -# Bluetooth devices are excluded from USB autosuspend: -# 0=do not exclude, 1=exclude. -USB_BLACKLIST_BTUSB=0 +if [ -x "$(command -v xinput)" ]; then + xinput --set-prop "TPPS/2 IBM TrackPoint" 'libinput Accel Speed' -0.4 +fi -# Phone devices are excluded from USB autosuspend: -# 0=do not exclude, 1=exclude (enable charging). -USB_BLACKLIST_PHONE=0 +setxkbmap \ + -layout us,ir \ + -option ctrl:nocaps \ + -option grp:shifts_toggle -# Printers are excluded from USB autosuspend: -# 0=do not exclude, 1=exclude. -USB_BLACKLIST_PRINTER=1 +xmodmap -e "keysym Menu = Super_R" -# WWAN devices are excluded from USB autosuspend: -# 0=do not exclude, 1=exclude. -USB_BLACKLIST_WWAN=1 +xsetroot -cursor_name left_ptr +xset r rate 200 45 +xset b off +#+end_src -# Include listed devices into USB autosuspend even if already excluded -# by the blacklists above (separate with spaces). -# Use lsusb to get the ids. -#USB_WHITELIST="1111:2222 3333:4444" +**** darrud +:PROPERTIES: +:header-args+: :tangle ~/.config/profiles/darrud +:END: -# Set to 1 to disable autosuspend before shutdown, 0 to do nothing -# (workaround for USB devices that cause shutdown problems). -#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1 +#+begin_src sh +export INFOPATH="$HOME/usr/local/share/info${INFOPATH:+:}$INFOPATH" +#+end_src -# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown -# on system startup: 0=disable, 1=enable. -# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below -# are ignored when this is enabled! -#RESTORE_DEVICE_STATE_ON_STARTUP=0 -RESTORE_DEVICE_STATE_ON_STARTUP=1 +**** langa +:PROPERTIES: +:header-args+: :tangle ~/.config/profiles/langa +:END: -# Radio devices to disable on startup: bluetooth, wifi, wwan. -# Separate multiple devices with spaces. -#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan" +#+begin_src sh +export XDG_DATA_DIRS="/usr/share/mate:/usr/local/share/:/usr/share/" +#+end_src -# Radio devices to enable on startup: bluetooth, wifi, wwan. -# Separate multiple devices with spaces. -#DEVICES_TO_ENABLE_ON_STARTUP="wifi" +** redshift +:PROPERTIES: +:header-args+: :tangle ~/.config/redshift.conf :comments none +:END: -# Radio devices to disable on shutdown: bluetooth, wifi, wwan. -# (workaround for devices that are blocking shutdown). -#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan" +#+begin_src conf +; Global settings for redshift +[redshift] +; Set the day and night screen temperatures (Neutral is 6500K) +;temp-day=5700 +;temp-night=3500 -# Radio devices to enable on shutdown: bluetooth, wifi, wwan. -# (to prevent other operating systems from missing radios). -#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan" +;temp-day=6500 +temp-day=6200 +;temp-night=4800 +;temp-night=5000 +;temp-night=4500 +temp-night=4000 -# Radio devices to enable on AC: bluetooth, wifi, wwan. -#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan" +; Enable/Disable a smooth transition between day and night +; 0 will cause a direct change from day to night screen temperature. +; 1 will gradually increase or decrease the screen temperature. +transition=1 -# Radio devices to disable on battery: bluetooth, wifi, wwan. -#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan" -DEVICES_TO_DISABLE_ON_BAT="bluetooth" +; Set the screen brightness. Default is 1.0. +;brightness=0.9 +; It is also possible to use different settings for day and night +; since version 1.8. +;brightness-day=0.7 +;brightness-night=0.4 +; Set the screen gamma (for all colors, or each color channel +; individually) +;gamma=0.8 +;gamma=1.0 +;gamma=0.8:0.7:0.8 +; This can also be set individually for day and night since +; version 1.10. +;gamma-day=0.8:0.7:0.8 +;gamma-night=0.6 -# Radio devices to disable on battery when not in use (not connected): -# bluetooth, wifi, wwan. -#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan" +; Set the location-provider: 'geoclue2' or 'manual' +; type 'redshift -l list' to see possible values. +; The location provider settings are in a different section. +;location-provider=manual +location-provider=geoclue2 -# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module -# required). Charging starts when the remaining capacity falls below the -# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value. -# Main / Internal battery (values in %) -#START_CHARGE_THRESH_BAT0=75 -#STOP_CHARGE_THRESH_BAT0=80 -# Ultrabay / Slice / Replaceable battery (values in %) -#START_CHARGE_THRESH_BAT1=75 -#STOP_CHARGE_THRESH_BAT1=80 +; Set the adjustment-method: 'randr', 'vidmode' +; type 'redshift -m list' to see all possible values. +; 'randr' is the preferred method, 'vidmode' is an older API. +; but works in some cases when 'randr' does not. +; The adjustment method settings are in a different section. +adjustment-method=randr -# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable. -#RESTORE_THRESHOLDS_ON_BAT=1 +; Configuration of the location-provider: +; type 'redshift -l PROVIDER:help' to see the settings. +; ex: 'redshift -l manual:help' +; Keep in mind that longitudes west of Greenwich (e.g. the Americas) +; are negative numbers. +;[manual] +;lat=48.1 +;lon=11.6 -# ------------------------------------------------------------------------------ -# tlp-rdw - Parameters for the radio device wizard -# Possible devices: bluetooth, wifi, wwan. +; Configuration of the adjustment-method +; type 'redshift -m METHOD:help' to see the settings. +; ex: 'redshift -m randr:help' +; In this example, randr is configured to adjust screen 1. +; Note that the numbering starts from 0, so this is actually the +; second screen. If this option is not specified, Redshift will try +; to adjust _all_ screens. +;[randr] +;screen=1 +#+end_src -# Hints: -# - Parameters are disabled by default, remove the leading # to enable them -# - Separate multiple radio devices with spaces +** signature +:PROPERTIES: +:header-args+: :tangle ~/.signature +:END: -# Radio devices to disable on connect. -#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan" -#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan" -#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi" +My email signature. -# Radio devices to enable on disconnect. -#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan" -#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT="" -#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT="" +#+begin_src +Amin Bandali +Free Software activist | GNU maintainer & webmaster +GPG: BE62 7373 8E61 6D6D 1B3A 08E8 A21A 0202 4881 6103 +https://bandali.eu.org +#+end_src -# Radio devices to enable/disable when docked. -#DEVICES_TO_ENABLE_ON_DOCK="" -#DEVICES_TO_DISABLE_ON_DOCK="" +** systemd -# Radio devices to enable/disable when undocked. -#DEVICES_TO_ENABLE_ON_UNDOCK="wifi" -#DEVICES_TO_DISABLE_ON_UNDOCK="" +Keep boot messages on tty1 (see [[https://wiki.archlinux.org/index.php/getty#Have_boot_messages_stay_on_tty1][here]]) + +#+begin_src conf :tangle /sudo::/etc/systemd/system/getty@tty1.service.d/noclear.conf +[Service] +TTYVTDisallocate=no #+end_src -*** shemshak +** TLP + +*** darrud -#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "shemshak")) "/sudo::/etc/default/tlp") +#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "darrud")) "/sudo::/etc/default/tlp") # ------------------------------------------------------------------------------ # tlp - Parameters for power saving # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html @@ -3491,6 +1721,8 @@ MAX_LOST_WORK_SECS_ON_BAT=60 # governor settings or conflicts will occur. #CPU_SCALING_GOVERNOR_ON_AC=powersave #CPU_SCALING_GOVERNOR_ON_BAT=powersave +CPU_SCALING_GOVERNOR_ON_AC=conservative +CPU_SCALING_GOVERNOR_ON_BAT=conservative # Set the min/max frequency available for the scaling governor. # Possible values strongly depend on your CPU. For available frequencies see @@ -3756,214 +1988,71 @@ RESTORE_DEVICE_STATE_ON_STARTUP=1 #DEVICES_TO_DISABLE_ON_UNDOCK="" #+end_src -** X - -*** xprofile +** Tridactyl :PROPERTIES: -:header-args+: :tangle ~/.xprofile +:header-args+: :tangle ~/.config/tridactyl/tridactylrc :END: -=~/.xprofile= is similar in style to =~/.xinitrc=, but on the -contrary, it's automatically sourced by LightDM, my display manager of -choice. - -#+begin_src sh :tangle no -xset -b # disable bell -xset r rate 200 45 # repeat delay (ms) and rate (repeats/sec) +#+begin_src conf +bind n scrollline 2 +bind p scrollline -2 -# setxkbmap -option compose:ralt +bind 0 scrollto 0 x +bind - scrollto 100 x -setxkbmap -option ctrl:nocaps # turn capslock into control -setxkbmap -option altwin:swap_alt_win # swap alt and super +bind P tabprev +bind N tabnext -if [ $(hostname) = "plasma" ] -then - setxkbmap -option ctrl:rctrl_ralt # turn right control into right alt -fi +bind d scrollpage 0.5 +bind u scrollpage -0.5 +unbind +unbind -if [ $(hostname) = "enigma" ] -then - xmodmap -e "keycode 135 = Alt_R" # remap menu key to alt -fi +bind x tabclose +bind X undo +bind stop -light -Scrs "intel_backlight" 2 +bind gd tabduplicate +bind gw tabdetach -source $HOME/.zprofile +bind O fillcmdline bmarks -export _JAVA_AWT_WM_NONREPARENTING=1 -export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true' +bind ; fillcmdline_notrail -if [ $(hostname) = "plasma" ] -then - unlock-def-gk.py & -fi +unbind -bspwm & -#+end_src +set hintfiltermode vimperator-reflow +set hintnames numeric +set urlparenttrailingslash false -*** X resources +set browser abrowser +" set newtab https://bandali.eu.org -**** Xresources -:PROPERTIES: -:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources") -:END: +seturl warrior.uwaterloo.ca noiframe true -#+begin_src conf-xdefaults -#include ".Xresources.d/fonts" -! #include ".Xresources.d/colors" -#include ".Xresources.d/emacs" -#include ".Xresources.d/rxvt-unicode" +" autocmd DocStart www.reddit.com js tri.excmds.urlmodify("-t", "www", "old") #+end_src -**** Xresources.d - -***** fonts -:PROPERTIES: -:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts") -:END: - -#+begin_src conf-xdefaults -Xft.lcdfilter: lcddefault -Xft.antialias: true -Xft.autohint: 0 -Xft.hinting: true -Xft.hintstyle: hintslight -! Xft.hintstyle: hintfull -Xft.rgba: rgb -Xft.dpi: 96 -#+end_src +** X -***** colors +*** xinit :PROPERTIES: -:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors") +:header-args+: :tangle ~/.xinitrc :END: -#+begin_src conf-xdefaults :tangle no -#include "gruvbox-light.xresources" -! #include "gruvbox-dark.xresources" -#include "gruvbox-urxvt256.xresources" -#+end_src - -#+begin_src conf-xdefaults :tangle no -! ----------------------------------------------------------------------------- -! File: gruvbox-light.xresources -! Description: Retro groove colorscheme generalized -! Author: morhetz -! Source: https://github.com/morhetz/gruvbox-generalized -! Last Modified: 6 Sep 2014 -! ----------------------------------------------------------------------------- - -! hard contrast: *background: #f9f5d7 -*background: #fbf1c7 -! soft contrast: *background: #f2e5bc -*foreground: #3c3836 -! Black + DarkGrey -*color0: #fdf4c1 -*color8: #928374 -! DarkRed + Red -*color1: #cc241d -*color9: #9d0006 -! DarkGreen + Green -*color2: #98971a -*color10: #79740e -! DarkYellow + Yellow -*color3: #d79921 -*color11: #b57614 -! DarkBlue + Blue -*color4: #458588 -*color12: #076678 -! DarkMagenta + Magenta -*color5: #b16286 -*color13: #8f3f71 -! DarkCyan + Cyan -*color6: #689d6a -*color14: #427b58 -! LightGrey + White -*color7: #7c6f64 -*color15: #3c3836 +#+begin_src sh +[ -f ~/.Xresources ] && xrdb -merge ~/.Xresources #+end_src -#+begin_src conf-xdefaults :tangle no -! ----------------------------------------------------------------------------- -! File: gruvbox-dark.xresources -! Description: Retro groove colorscheme generalized -! Author: morhetz -! Source: https://github.com/morhetz/gruvbox-generalized -! Last Modified: 6 Sep 2014 -! ----------------------------------------------------------------------------- - -! hard contrast: *background: #1d2021 -*background: #282828 -! soft contrast: *background: #32302f -*foreground: #ebdbb2 -! Black + DarkGrey -*color0: #282828 -*color8: #928374 -! DarkRed + Red -*color1: #cc241d -*color9: #fb4934 -! DarkGreen + Green -*color2: #98971a -*color10: #b8bb26 -! DarkYellow + Yellow -*color3: #d79921 -*color11: #fabd2f -! DarkBlue + Blue -*color4: #458588 -*color12: #83a598 -! DarkMagenta + Magenta -*color5: #b16286 -*color13: #d3869b -! DarkCyan + Cyan -*color6: #689d6a -*color14: #8ec07c -! LightGrey + White -*color7: #a89984 -*color15: #ebdbb2 -#+end_src +*** X resources -#+begin_src conf-xdefaults :tangle no -! ----------------------------------------------------------------------------- -! File: gruvbox-urxvt256.xresources -! Description: Retro groove colorscheme generalized -! Author: morhetz -! Source: https://github.com/morhetz/gruvbox-generalized -! Last Modified: 13 Dec 2013 -! ----------------------------------------------------------------------------- - -URxvt.color24: #076678 -URxvt.color66: #427b58 -URxvt.color88: #9d0006 -URxvt.color96: #8f3f71 -URxvt.color100: #79740e -URxvt.color108: #8ec07c -URxvt.color109: #83a598 -URxvt.color130: #af3a03 -URxvt.color136: #b57614 -URxvt.color142: #b8bb26 -URxvt.color167: #fb4934 -URxvt.color175: #d3869b -URxvt.color208: #fe8019 -URxvt.color214: #fabd2f -URxvt.color223: #ebdbb2 -URxvt.color228: #f2e5bc -URxvt.color229: #fbf1c7 -URxvt.color230: #f9f5d7 -URxvt.color234: #1d2021 -URxvt.color235: #282828 -URxvt.color236: #32302f -URxvt.color237: #3c3836 -URxvt.color239: #504945 -URxvt.color241: #665c54 -URxvt.color243: #7c6f64 -URxvt.color244: #928374 -URxvt.color245: #928374 -URxvt.color246: #a89984 -URxvt.color248: #bdae93 -URxvt.color250: #d5c4a1 +#+begin_src conf-xdefaults :tangle (when (eq system-type 'gnu/linux) "~/.Xresources") +#include ".Xresources.d/fonts" +#include ".Xresources.d/emacs" +#include ".Xresources.d/rxvt-unicode" #+end_src -***** emacs +**** emacs :PROPERTIES: :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs") :END: @@ -3973,7 +2062,7 @@ Emacs.menuBar: off Emacs.toolBar: off Emacs.verticalScrollBars: off Emacs.cursorBlink: off -Emacs.FontBackend: xft,x +Emacs.FontBackend: ftcrhb,x ! Emacs.font: Ubuntu Mono-12 ! Emacs.font: Triplicate T4C-11 ! Emacs.font: Ubuntu Mono-10.5 @@ -3986,12 +2075,28 @@ Emacs.FontBackend: xft,x ! Emacs.font: Inconsolata:size=16 ! Emacs.font: Inconsolata LGC:size=14 ! Emacs.font: Source Code Pro Medium-10.5 -Emacs.font: Source Code Pro:size=14 +Emacs.font: Source Code Pro Medium:size=14 ! Emacs.font: Ubuntu Mono:size=16 ! Emacs.font: Iosevka:size=16 #+end_src -***** rxvt-unicode +**** fonts +:PROPERTIES: +:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts") +:END: + +#+begin_src conf-xdefaults +Xft.lcdfilter: lcddefault +Xft.antialias: true +Xft.autohint: 0 +Xft.hinting: true +Xft.hintstyle: hintslight +! Xft.hintstyle: hintfull +Xft.rgba: rgb +Xft.dpi: 96 +#+end_src + +**** rxvt-unicode :PROPERTIES: :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode") :END: @@ -4004,10 +2109,11 @@ URxvt.italicFont: xft:source code pro:italic:pixelsize=14:antialias=true:h URxvt.bolditalicFont: xft:source code pro:semibold:italic:pixelsize=14:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic URxvt.xftAntialias: true -URxvt.letterSpace: 0 +URxvt.letterSpace: -1 -URxvt.depth: 0 -URxvt.loginShell: true +!URxvt.depth: 0 +!URxvt.loginShell: true +!URxvt*buffered: false URxvt.saveLines: 100000 URxvt.internalBorder: 3 URxvt.lineSpace: 0 @@ -4025,13 +2131,17 @@ URxvt.url-select.underline: true URxvt.keysym.M-u: perl:url-select:select_next URxvt.keysym.M-Escape: perl:keyboard-select:activate URxvt.keysym.M-s: perl:keyboard-select:search -URxvt.url-launcher: /usr/bin/firefox +URxvt.url-launcher: /usr/bin/abrowser URxvt.matcher.button: 1 -URxvt.iso14755: false -URxvt.iso14755_53: false -URxvt.keysym.M-c: perl:clipboard:copy -URxvt.keysym.M-v: perl:clipboard:paste +! URxvt.iso14755: false +! URxvt.iso14755_53: false +! URxvt.keysym.M-c: perl:clipboard:copy +! URxvt.keysym.M-v: perl:clipboard:paste +URxvt.keysym.M-c: eval:selection_to_clipboard +URxvt.keysym.M-v: eval:paste_clipboard URxvt.keysym.C-A-V: perl:clipboard:paste_escaped +! URxvt.keysym.Shift-Control-C: eval:selection_to_clipboard +! URxvt.keysym.Shift-Control-V: eval:paste_clipboard URxvt.keysym.C-Up: font-size:increase URxvt.keysym.C-Down: font-size:decrease URxvt.keysym.C-S-Up: font-size:incglobal @@ -4039,7 +2149,7 @@ URxvt.keysym.C-S-Down: font-size:decglobal URxvt.keysym.C-equal: font-size:reset !URxvt.keysym.C-question: font-size:show -URxvt.iconFile: /usr/share/icons/Paper/48x48/apps/utilities-terminal.png +!URxvt.iconFile: /usr/share/icons/elementary-xfce/apps/48/terminal.png !urxvt*foreground: white !urxvt*background: black @@ -4089,6 +2199,64 @@ URxvt.iconFile: /usr/share/icons/Paper/48x48/apps/utilities-terminal !*color7: #babdb9 !*color15: #EEEEEC + +! ! Solarized +! ! Base16 Solarized Light +! ! Scheme: Ethan Schoonover (http://ethanschoonover.com/solarized) + +! #define base00 #fdf6e3 +! #define base01 #eee8d5 +! #define base02 #93a1a1 +! #define base03 #839496 +! #define base04 #657b83 +! #define base05 #586e75 +! #define base06 #073642 +! #define base07 #002b36 +! #define base08 #dc322f +! #define base09 #cb4b16 +! #define base0A #b58900 +! #define base0B #859900 +! #define base0C #2aa198 +! #define base0D #268bd2 +! #define base0E #6c71c4 +! #define base0F #d33682 + +! *foreground: base05 +! #ifdef background_opacity +! *background: [background_opacity]base00 +! #else +! *background: base00 +! #endif +! *cursorColor: base05 + +! *color0: base00 +! *color1: base08 +! *color2: base0B +! *color3: base0A +! *color4: base0D +! *color5: base0E +! *color6: base0C +! *color7: base05 + +! *color8: base03 +! *color9: base08 +! *color10: base0B +! *color11: base0A +! *color12: base0D +! *color13: base0E +! *color14: base0C +! *color15: base07 + +! ! Note: colors beyond 15 might not be loaded (e.g., xterm, urxvt), +! ! use 'shell' template to set these if necessary +! *color16: base09 +! *color17: base0F +! *color18: base01 +! *color19: base02 +! *color20: base04 +! *color21: base06 + + ! Tango colour theme for rxvt-unicode URxvt.background: #FFFFFF URxvt.foreground: #000000 @@ -4121,24 +2289,42 @@ URxvt.color13: #AD7FA8 !URxvt.color6: #06989A !URxvt.color14: #34E2E2 ! orange (replaces cyan) -,*color6: #ce5c00 -,*color14: #fcaf3e +,,*color6: #ce5c00 +,,*color14: #fcaf3e ! White URxvt.color7: #D3D7CF URxvt.color15: #EEEEEC #+end_src -*** xkb us_ab keyboard layout +*** ~/.xsession +:PROPERTIES: +:header-args+: :tangle ~/.xsession :tangle-mode (identity #o755) +:END: + +For custom session on Debian. See https://wiki.debian.org/Xsession. + +#+begin_src sh +if [ -f "$HOME/.xinitrc" ]; then + . "$HOME/.xinitrc" +fi + +[ -f "/usr/lib/x86_64-linux-gnu/xfce4/notifyd/xfce4-notifyd" ] && /usr/lib/x86_64-linux-gnu/xfce4/notifyd/xfce4-notifyd & +[ -x "$(command -v light-locker)" ] && light-locker --lock-on-suspend & +[ -x "$(command -v pasystray)" ] && pasystray -a & +[ -x "$(command -v nm-applet)" ] && nm-applet & +[ -x "$(command -v compton)" ] && compton & +[ -x "$(command -v dunst)" ] && dunst & +[ -x "$(command -v emacs)" ] && exec ssh-agent exwm -ib 0 +#+end_src -#+begin_src conf :tangle "/sudo::/usr/share/X11/xkb/symbols/us_ab" :comments none -default partial alphanumeric_keys -xkb_symbols "us_ab" { - include "us(basic)" - name[Group1]= "English (US)(aminb)"; +*** ~/.xsessionrc +:PROPERTIES: +:header-args+: :tangle ~/.xsessionrc +:END: - key { [ Alt_R ] }; -}; +#+begin_src sh +if [ -f "$HOME/.profile" ]; then . "$HOME/.profile"; fi #+end_src ** XDG @@ -4148,16 +2334,16 @@ xkb_symbols "us_ab" { #+begin_src conf XDG_DESKTOP_DIR="$HOME/Desktop" -XDG_DOCUMENTS_DIR="$HOME/usr/docs" -XDG_DOWNLOAD_DIR="$HOME/usr/dls" +XDG_DOCUMENTS_DIR="$HOME/usr/doc" +XDG_DOWNLOAD_DIR="$HOME/usr/dl" XDG_MUSIC_DIR="$HOME/usr/music" -XDG_PICTURES_DIR="$HOME/usr/pics" -XDG_PUBLICSHARE_DIR="$HOME/usr/Public" -XDG_TEMPLATES_DIR="$HOME/usr/Templates" -XDG_VIDEOS_DIR="$HOME/usr/vids" +XDG_PICTURES_DIR="$HOME/usr/pic" +XDG_PUBLICSHARE_DIR="$HOME/usr/pub" +XDG_TEMPLATES_DIR="$HOME/usr/temp" +XDG_VIDEOS_DIR="$HOME/usr/vid" #+end_src -** Zathura +** zathura :PROPERTIES: :header-args+: :tangle ~/.config/zathura/zathurarc :END: @@ -4169,276 +2355,27 @@ set zoom-step 05 set default-bg "#272727" set statusbar-bg "#272727" set inputbar-bg "#373737" -#+end_src - -** Zsh - -My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]], -[[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them -installed. - -*** zimrc -:PROPERTIES: -:header-args+: :tangle ~/.zimrc -:END: - -#+begin_src sh -################# -# CORE SETTINGS # -################# - -# -# Zim settings -# - -# Select what modules you would like enabled. -# The second line of modules may depend on options set by modules in the first -# line. These dependencies are noted on the respective module's README.md. -zmodules=(directory environment git git-info history input ssh utility custom \ - syntax-highlighting history-substring-search prompt completion) - - -################### -# MODULE SETTINGS # -################### - -# -# Prompt -# - -# Set your desired prompt here -zprompt_theme='pure' -#PURE_PROMPT_SYMBOL=λ -#PURE_PROMPT_SYMBOL=δ -PURE_PROMPT_SYMBOL=➜ - -# -# Completion -# - -# set an optional host-specific filename for the completion cache file -# if none is provided, the default '.zcompdump' is used. -#zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}" - -# -# Utility -# - -# Uncomment to enable command correction prompts -# See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput -setopt CORRECT - -# -# Environment -# - -# Set the string below to the desired terminal title format string. -# The terminal title is redrawn upon directory change, however, variables like -# ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data: -# http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes -# The example below uses the following format: 'username@host:/current/directory' -ztermtitle='%n@%m:%~' - -# -# Input -# - -# Uncomment to enable double-dot expansion. -# This appends '../' to your input for each '.' you type after an initial '..' -#zdouble_dot_expand='true' - -# -# Syntax-Highlighting -# - -# This determines what highlighters will be used with the syntax-highlighting module. -# Documentation of the highlighters can be found here: -# https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md -# For (u)rxvt, termite and gnome-terminal users, -# removing the 'cursor' highlighter will fix the disappearing cursor problem -#zhighlighters=(main brackets cursor) -zhighlighters=(main brackets pattern) - -# -# SSH -# - -# Load these ssh identities with the ssh module -zssh_ids=(id_ed25519_bandali) - -# -# Pacman -# - -# Set (optional) pacman front-end. -zpacman_frontend='yay' - -# Load any helper scripts as defined here -#zpacman_helper=(aur) - - -#+end_src - -*** zlogin -:PROPERTIES: -:header-args+: :tangle ~/.zlogin -:END: - -#+begin_src sh -# -# User configuration sourced by login shells -# - -# Initialize zim -[[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh - -#+end_src - -*** zprofile -:PROPERTIES: -:header-args+: :tangle ~/.zprofile -:END: - -#+begin_src sh -#PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH" -#PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH -export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH -export XDG_CONFIG_HOME=$HOME/.config -export XDG_DATA_HOME=$HOME/.local/share -export XDG_DATA_DIRS=/usr/local/share:/usr/share -export MAILDIR="$HOME/mail" -export CVS_RSH=ssh -#export MATHMODELS=$HOME/src/eiffel/mathmodels -#export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src -#export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/ - -# Eiffel2Java stuff -#export JAVA_HOME=/usr/lib/jvm/default -#export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux" -#export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server" -#export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server" - -#export PATH="$HOME/usr/build/pvs:$PATH" -#export SBCLISP_HOME=/usr/share/sbcl-source -#export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib" - -export MOZ_USE_XINPUT2=1 # precise scrolling in firefox - -#export JAVA_HOME=/usr/lib/jvm/java-8-openjdk -#export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G" - -export NIXPKGS=$HOME/src/git/nixpkgs - -if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer - -export GUIX_LOCPATH="$HOME/.guix-profile/lib/locale" -export PATH="/$HOME/.config/guix/current/bin${PATH:+:}$PATH" -export SSL_CERT_DIR="$HOME/.guix-profile/etc/ssl/certs" -export SSL_CERT_FILE="$HOME/.guix-profile/etc/ssl/certs/ca-certificates.crt" -export GIT_SSL_CAINFO="$SSL_CERT_FILE" -#+end_src - -*** zshenv -:PROPERTIES: -:header-args+: :tangle ~/.zshenv -:END: - -#+begin_src sh -# Ensure that a non-login, non-interactive shell has a defined environment. -if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then - source "${ZDOTDIR:-$HOME}/.zprofile" -fi -#+end_src - -*** zshrc -:PROPERTIES: -:header-args+: :tangle ~/.zshrc -:END: - -#+begin_src sh -# Bash-like navigation -#export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>' -#export WORDCHARS='*?-[]~=&;!#$%^(){}<>' -export WORDCHARS='*?[]~=&;!#$%^(){}<>' -#ZLE_SPACE_SUFFIX_CHARS=$'|&' - -#disable -r time # disable shell reserved word -#alias time='time -p' # -p for POSIX output - -# rehash if last command was pacaur or pacman -# (so that zsh picks up changes in $PATH immediately) -TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh } - -# -# User configuration sourced by interactive shells -# - -# Define zim location -export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim - -# Start zim -[[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh - -ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red') -#ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold' - -setopt globdots - -source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh -# source ~/.zsh/zsh-autopair/autopair.zsh - - -### fzf ### - -source /usr/share/fzf/key-bindings.zsh -source /usr/share/fzf/completion.zsh - -# Accept history selection instead of putting it on -# the command line -fzf-history-widget-accept() { - fzf-history-widget - zle accept-line -} -#zle -N fzf-history-widget-accept -#bindkey '^R' fzf-history-widget-accept - -# alt+c preview -export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'" - -### fzf ### - - -# aliases -alias mpv="mpv --ytdl-format mp4" -alias mv="mv -iv" -alias cp="cp -iv" -alias scl=systemctl -alias jcl=journalctl -alias m="mbsync csclub; mbsync uwaterloo; mbsync amin" -alias best="youtube-dl -f best" -alias sd="ssh deb" -alias sf="ssh fp" -alias sn="ssh nix" +set window-title-basename true +set statusbar-home-tilde true -aur() { - cd ~/usr/build - git clone https://aur.archlinux.org/${1}.git - cd ${1} -} +map scroll down +map scroll up -# i-beam cursor -echo -e "\033[5 q" -#echo -e "\033[6 q" +map H jumplist backward +map L jumplist forward +map [normal] i toggle_index +map [index] i toggle_index +map [index] q toggle_index #+end_src * Scripts -This section contains various useful scripts and the ones used by the -programs above. For instance, =toggle-tablet= for switching to and -from tablet mode on my X220T, =toggle-presentation-mode= for toggling -Xfce's presentation mode which keeps the screen awake, and -=rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an +This section contains various useful scripts including ones used by +the programs above. For instance, =toggle-tablet= for switching to +and from tablet mode on my X220T, =toggle-presentation-mode= for +toggling Xfce's presentation mode which keeps the screen awake, and +=rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an exact brightness value. ** battery-percentage-time @@ -4469,12 +2406,21 @@ fi printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60)) #+end_src -** my-i3status.py +** emcl +:PROPERTIES: +:header-args+: :tangle ~/.local/bin/emcl :shebang "#!/bin/sh" +:END: + +#+begin_src sh +exec emacsclient --alternate-editor="" -c "$@" +#+end_src + +** my-i3status :PROPERTIES: -:header-args+: :tangle ~/.local/bin/my-i3status.py :shebang "#!/usr/bin/env python2" +:header-args+: :tangle ~/.local/bin/my-i3status :shebang "#!/usr/bin/env python2" :END: -#+begin_src python :comments none +#+begin_src python # -*- coding: utf-8 -*- # This script is a simple wrapper which prefixes each i3status line with custom @@ -4539,7 +2485,7 @@ if __name__ == '__main__': if get_nosleep(): j = json.loads(line) # insert information into the start of the json, but could be anywhere - j.insert(0, {'full_text' : '🖵 ', 'name' : 'nosleep'}) + j.insert(0, {'full_text' : '•', 'name' : 'nosleep'}) # and echo back new encoded json print_line(prefix+json.dumps(j)) else: @@ -4548,18 +2494,18 @@ if __name__ == '__main__': ** rofi-light :PROPERTIES: -:header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash" +:header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/sh" :END: -#+begin_src bash +#+begin_src sh cur=$(light -G) val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 12) -[ -n "$val" ] && light -S $val +[ -n "$val" ] && light -S "$val" #+end_src -** rofi-remmina.py +** rofi-remmina :PROPERTIES: -:header-args+: :tangle ~/.local/bin/rofi-remmina.py :shebang "#!/usr/bin/env python2" +:header-args+: :tangle ~/.local/bin/rofi-remmina :shebang "#!/usr/bin/env python2" :END: #+begin_src python @@ -4594,136 +2540,59 @@ r = Popen(["remmina", "-c", fdict[selected]]) r.wait() #+end_src -** s (run sway) -:PROPERTIES: -:header-args+: :tangle ~/.local/bin/s :shebang "#!/bin/bash" -:END: - -#+begin_src bash -export _JAVA_AWT_WM_NONREPARENTING=1 -export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true' -light -Nr 2 -source $HOME/.zprofile -sway -#+end_src - -** sway-ws-util -:PROPERTIES: -:header-args+: :tangle ~/.local/bin/sway-ws-util :shebang "#!/bin/bash" -:END: - -#+begin_src bash -curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name') -[[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1)) -[[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1)) -dest_ws=-1 -op=-1 - -if [ "$1" = "switch" ] || [ "$1" = "move" ]; then - op="$1" - if [ "$2" = "prev" ]; then - dest_ws="$prev_ws" - elif [ "$2" = "next" ]; then - dest_ws="$next_ws" - else - echo "Usage: $0 $1 {prev|next} [follow]" - exit 1 - fi -else - echo "Usage: $0 {switch|move} {prev|next} [follow]" - exit 1 -fi - -if [ "$op" = "switch" ]; then - sway workspace "$dest_ws" -elif [ "$op" = "move" ]; then - sway move container to workspace "$dest_ws" - if [ "$3" = "follow" ]; then - sway workspace "$dest_ws" - fi -fi -#+end_src - -** toggle-layout -:PROPERTIES: -:header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash" -:END: - -#+begin_src bash :tangle no -lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)" - -if [ "$lang" = "us" ]; then - setxkbmap ir -else - setxkbmap us - # xmodmap $HOME/.Xmodmap -fi -#+end_src - ** toggle-presentation-mode :PROPERTIES: -:header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash" +:header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/sh" :END: -#+begin_src bash :tangle no +#+begin_src sh xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T #+end_src ** toggle-tablet :PROPERTIES: -:header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash" +:header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/sh" :END: -This script toggles between a 'normal' mode and a 'tablet' mode, doing -a few things: +#+begin_src sh +# This script toggles between a 'normal' mode and a 'tablet' mode, doing +# a few things: -- rotates the screen using =xrandr=, so that rotating the physical - display of my X220t would have the laptop's battery on the right - hand side, -- enables touch screen, -- properly rotates the stylus pen and touch screen pointers, and -- toggles between RGB and Vertical BGR sub-pixel order. +# - rotates the screen using =xrandr=, so that rotating the physical +# display of my X220t would have the laptop's battery on the right +# hand side, +# - enables touch screen, +# - properly rotates the stylus pen and touch screen pointers, and +# - toggles between RGB and Vertical BGR sub-pixel order. -#+begin_src bash :tangle no case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in 0) # Screen is not rotated, we should rotate it right (90°) - xrandr -o 3 - xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1 - xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1 - xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1 - xfconf-query -c xsettings -p /Xft/RGBA -s vbgr - ;; + xrandr -o 3 + xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1 + xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1 + xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1 + xfconf-query -c xsettings -p /Xft/RGBA -s vbgr + ;; 1) # Currently top is rotated right, we should set it normal (0°) - xrandr -o 0 - xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0 - xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0 - xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0 - xfconf-query -c xsettings -p /Xft/RGBA -s rgb - ;; - *) - echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2 - exit 1 - ;; + xrandr -o 0 + xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0 + xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0 + xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0 + xfconf-query -c xsettings -p /Xft/RGBA -s rgb + ;; + ,*) + echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2 + exit 1 + ;; esac #+end_src -** unlock-def-gk.py -:PROPERTIES: -:header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2" -:END: - -#+begin_src python :tangle no -import gnomekeyring as gk -# list_item_ids_sync('login')[0] == 1L -gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret()) -#+end_src - ** volume-info :PROPERTIES: :header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh" :END: -#+begin_src sh :tangle no +#+begin_src sh cur_vol=$(pamixer --get-volume) if [ $(pamixer --get-mute) = true ]; then @@ -4733,121 +2602,9 @@ else fi #+end_src -** wp - -My little wallpaper changer script. - -*** wp -:PROPERTIES: -:header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash" -:END: - -#+begin_src bash :tangle no -export DISPLAY=:0 - -case "$1" in - "day") - feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg - ;; - "night") - feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg - ;; - *) - echo $"Usage: $0 {day|night}" - exit 1 -esac -#+end_src - -*** wp-auto -:PROPERTIES: -:header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash" -:END: - -#+begin_src bash :tangle no -SED=$(which sed) -ROFI=$(which rofi) - -export DISPLAY=:0 -HOUR=$(date +%H) - -if [ -z "${SED}" ] -then - echo "Did not find 'sed', script cannot continue." - exit 1 -fi -if [ -z "${ROFI}" ] -then - echo "Did not find rofi, there is no point to continue." - exit 1 -fi - -### -# Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end. -# Repeated calls should leave the config clean-ish -### -function set_theme() -{ - CDIR="${HOME}/.config/rofi/" - if [ ! -d "${CDIR}" ] - then - mkdir -p ${CDIR} - fi - if [ -f "${CDIR}/config" ] - then - ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config" - fi - echo "rofi.theme: ${1}" >> "${CDIR}/config" - -} - -if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ] - then - feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg - xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources - set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi" - else - feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg - xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources - set_theme "/usr/share/rofi/themes//gruvbox-light.rasi" -fi -#+end_src - -*** wp.service -:PROPERTIES: -:header-args+: :tangle ~/.config/systemd/user/wp.service -:END: - -#+begin_src conf :tangle no -[Unit] -Description=wallpaper service - -[Service] -Type=oneshot -ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto -#+end_src - -*** wp.timer -:PROPERTIES: -:header-args+: :tangle ~/.config/systemd/user/wp.timer -:END: - -#+begin_src conf :tangle no -[Unit] -[Unit] -Description=wallpaper timer - -[Timer] -OnCalendar=07,21:00 -Unit=wp.service -Persistent=true - -[Install] -WantedBy=timers.target -#+end_src - -** zathura-sync.sh +** zathura-sync :PROPERTIES: -:header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh" +:header-args+: :tangle ~/.local/bin/zathura-sync :shebang "#!/bin/sh" :END: #+begin_src sh @@ -4858,110 +2615,3 @@ zathura --synctex-forward "$pos" "$pdffile" || \ zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" & sleep 1; zathura --synctex-forward "$pos" "$pdffile" ) #+end_src -** Fun :) - -*** eat-em -:PROPERTIES: -:header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh" -:END: - -#+begin_src sh -# Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921 -# [ESC] character in original post removed here. - -# ANSI Color -- use these variables to easily have different color -# and format output. Make sure to output the reset sequence after -# colors (f = foreground, b = background), and use the 'off' -# feature for anything you turn on. - -initializeANSI() -{ - esc="$(echo -en '\e')" - - blackf="${esc}[30m"; redf="${esc}[31m"; greenf="${esc}[32m" - yellowf="${esc}[33m" bluef="${esc}[34m"; purplef="${esc}[35m" - cyanf="${esc}[36m"; whitef="${esc}[37m" - - blackb="${esc}[40m"; redb="${esc}[41m"; greenb="${esc}[42m" - yellowb="${esc}[43m" blueb="${esc}[44m"; purpleb="${esc}[45m" - cyanb="${esc}[46m"; whiteb="${esc}[47m" - - boldon="${esc}[1m"; boldoff="${esc}[22m" - italicson="${esc}[3m"; italicsoff="${esc}[23m" - ulon="${esc}[4m"; uloff="${esc}[24m" - invon="${esc}[7m"; invoff="${esc}[27m" - - reset="${esc}[0m" -} - -# note in this first use that switching colors doesn't require a reset -# first - the new color overrides the old one. - -#clear - -initializeANSI - -cat << EOF - - ${yellowf} ▄███████▄${reset} ${redf} ▄██████▄${reset} ${greenf} ▄██████▄${reset} ${bluef} ▄██████▄${reset} ${purplef} ▄██████▄${reset} ${cyanf} ▄██████▄${reset} - ${yellowf}▄█████████▀▀${reset} ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset} ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset} ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset} ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset} ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset} - ${yellowf}███████▀${reset} ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset} ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset} ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset} ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset} ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset} - ${yellowf}███████▄${reset} ${redf}████████████${reset} ${greenf}████████████${reset} ${bluef}████████████${reset} ${purplef}████████████${reset} ${cyanf}████████████${reset} - ${yellowf}▀█████████▄▄${reset} ${redf}██▀██▀▀██▀██${reset} ${greenf}██▀██▀▀██▀██${reset} ${bluef}██▀██▀▀██▀██${reset} ${purplef}██▀██▀▀██▀██${reset} ${cyanf}██▀██▀▀██▀██${reset} - ${yellowf} ▀███████▀${reset} ${redf}▀ ▀ ▀ ▀${reset} ${greenf}▀ ▀ ▀ ▀${reset} ${bluef}▀ ▀ ▀ ▀${reset} ${purplef}▀ ▀ ▀ ▀${reset} ${cyanf}▀ ▀ ▀ ▀${reset} - - ${boldon}${yellowf} ▄███████▄ ${redf} ▄██████▄ ${greenf} ▄██████▄ ${bluef} ▄██████▄ ${purplef} ▄██████▄ ${cyanf} ▄██████▄${reset} - ${boldon}${yellowf}▄█████████▀▀ ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄ ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄ ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄ ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄ ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset} - ${boldon}${yellowf}███████▀ ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███ ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███ ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███ ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███ ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset} - ${boldon}${yellowf}███████▄ ${redf}████████████ ${greenf}████████████ ${bluef}████████████ ${purplef}████████████ ${cyanf}████████████${reset} - ${boldon}${yellowf}▀█████████▄▄ ${redf}██▀██▀▀██▀██ ${greenf}██▀██▀▀██▀██ ${bluef}██▀██▀▀██▀██ ${purplef}██▀██▀▀██▀██ ${cyanf}██▀██▀▀██▀██${reset} - ${boldon}${yellowf} ▀███████▀ ${redf}▀ ▀ ▀ ▀ ${greenf}▀ ▀ ▀ ▀ ${bluef}▀ ▀ ▀ ▀ ${purplef}▀ ▀ ▀ ▀ ${cyanf}▀ ▀ ▀ ▀${reset} - -EOF -#+end_src - -*** invade-em -:PROPERTIES: -:header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash" -:END: - -#+begin_src bash -# -# ANSI color scheme script featuring Space Invaders -# -# Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921 -# Modified by lolilolicon -# - -f=3 b=4 -for j in f b; do - for i in {0..7}; do - printf -v $j$i %b "\e[${!j}${i}m" - done -done -bld=$'\e[1m' -rst=$'\e[0m' - -cat << EOF - - $f1 ▀▄ ▄▀ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4 ▀▄ ▄▀ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst - $f1 ▄█▀███▀█▄ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4 ▄█▀███▀█▄ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst - $f1█▀███████▀█ $f2▀▀███▀▀███▀▀ $f3▀█▀██▀█▀ $f4█▀███████▀█ $f5▀▀███▀▀███▀▀ $f6▀█▀██▀█▀$rst - $f1▀ ▀▄▄ ▄▄▀ ▀ $f2 ▀█▄ ▀▀ ▄█▀ $f3▀▄ ▄▀ $f4▀ ▀▄▄ ▄▄▀ ▀ $f5 ▀█▄ ▀▀ ▄█▀ $f6▀▄ ▄▀$rst - - $bld$f1▄ ▀▄ ▄▀ ▄ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4▄ ▀▄ ▄▀ ▄ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst - $bld$f1█▄█▀███▀█▄█ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4█▄█▀███▀█▄█ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst - $bld$f1▀█████████▀ $f2▀▀▀██▀▀██▀▀▀ $f3▀▀█▀▀█▀▀ $f4▀█████████▀ $f5▀▀▀██▀▀██▀▀▀ $f6▀▀█▀▀█▀▀$rst - $bld$f1 ▄▀ ▀▄ $f2▄▄▀▀ ▀▀ ▀▀▄▄ $f3▄▀▄▀▀▄▀▄ $f4 ▄▀ ▀▄ $f5▄▄▀▀ ▀▀ ▀▀▄▄ $f6▄▀▄▀▀▄▀▄$rst - - - $f7▌$rst - - $f7▌$rst - - $f7 ▄█▄ $rst - $f7▄█████████▄$rst - $f7▀▀▀▀▀▀▀▀▀▀▀$rst - -EOF -#+end_src