X-Git-Url: https://git.shemshak.org/gitweb.cgi/~bandali/configs/blobdiff_plain/e388ae6fc6f7376d07dd34788145fcf5fc0cc0c5..67023528a1c34cb86fd749b9aeeb847d98ac1373:/rc.org

diff --git a/rc.org b/rc.org
index 525849d..16741cd 100644
--- a/rc.org
+++ b/rc.org
@@ -625,13 +625,71 @@ timeout = 0
  <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
  <alias binding="same">
   <family>Helvetica</family>
-  <accept>
+  <prefer>
    <family>Liberation Sans</family>
-  </accept>
+  </prefer>
 </alias>
 </fontconfig>
 #+end_src
 
+** getmail
+
+*** getmailrc
+:PROPERTIES:
+:header-args+: :tangle ~/.getmail/getmailrc
+:END:
+
+#+begin_src conf
+[retriever]
+type = SimplePOP3SSLRetriever
+server = fencepost.gnu.org
+username = aminb
+password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
+port = 995
+use_apop = True
+
+[destination]
+type = Maildir
+path = ~/mail/gnu/Inbox/
+
+[options]
+delete = True
+#+end_src
+
+*** getmail.service
+:PROPERTIES:
+:header-args+: :tangle ~/.config/systemd/user/getmail.service
+:END:
+
+#+begin_src conf :tangle no
+[Unit]
+Description=getmail service
+
+[Service]
+Type=oneshot
+ExecStart=/usr/bin/getmail
+StandardOutput=syslog
+StandardError=syslog
+#+end_src
+
+*** getmail.timer
+:PROPERTIES:
+:header-args+: :tangle ~/.config/systemd/user/getmail.timer
+:END:
+
+#+begin_src conf :tangle no
+[Unit]
+Description=getmail timer
+
+[Timer]
+OnCalendar=*:0/30
+Persistent=true
+Unit=getmail.service
+
+[Install]
+WantedBy=timers.target
+#+end_src
+
 ** Git
 
 *** gitconfig
@@ -745,12 +803,60 @@ timeout = 0
 *-autoloads.el
 #+end_src
 
+** GnuPG
+:PROPERTIES:
+:header-args+: :tangle ~/.gnupg/gpg-agent.conf
+:END:
+
+#+begin_src conf
+default-cache-ttl 43200
+max-cache-ttl 43200
+
+default-cache-ttl-ssh 10800
+max-cache-ttl-ssh 10800
+
+# pinentry-program /usr/bin/pinentry-qt
+#+end_src
+
+** GTK
+
+*** gtk-2.0
+:PROPERTIES:
+:header-args+: :tangle ~/.gtkrc-2.0
+:END:
+
+#+begin_src conf
+gtk-theme-name="Greybird"
+gtk-icon-theme-name="Paper"
+gtk-font-name="Ubuntu 10"
+gtk-menu-images=0
+# gtk-key-theme-name = "Emacs"
+#+end_src
+
+*** gtk-3.0
+:PROPERTIES:
+:header-args+: :tangle ~/.config/gtk-3.0/settings.ini
+:END:
+
+#+begin_src conf :tangle no
+[Settings]
+gtk-icon-theme-name = Paper
+# gtk-theme-name = Adwaita
+
+gtk-theme-name = Greybird
+# gtk-theme-name = Arc-Darker
+# gtk-theme-name = Numix-ArchBlue
+
+gtk-font-name = Ubuntu 10
+# gtk-key-theme-name = Emacs
+#+end_src
+
 ** [[https://github.com/Leinnan/i3gs][i3gs]]
 :PROPERTIES:
 :header-args+: :tangle ~/.config/i3gs/config
 :END:
 
-#+begin_src conf :comments none
+#+begin_src conf :comments none :tangle no
 borders_width=0 0 2 0
 separator_width=10
 
@@ -797,146 +903,78 @@ title=<span weight='heavy' fgcolor='#FFDC00'> </span>
 borders_color=#FFDC00
 separator_width=0
 #+end_src
-** Latexmk
-:PROPERTIES:
-:header-args+: :tangle ~/.latexmkrc
-:END:
-
-#+begin_src conf
-$pdf_previewer = "start zathura %O %S";
-$clean_ext = "aux out";
-
-# $pdf_update_method = 4;
-# $pdf_update_command = "zathura %O %S";
-
-# Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
-# by Ctrl+click in the PDF.
-# Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
-# editor.
-# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
-#+end_src
-
-** libinput
-
-Improve XPS 15 9560's touchpad experience.
-
-# begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
-#+begin_src conf :tangle no
-Section "InputClass"
-    Identifier "libinput touchpad catchall"
-    Driver "libinput"
-    MatchIsTouchpad "on"
-    Option "ClickMethod" "clickfinger"
-    Option "NaturalScrolling" "true"
-    Option "Tapping" "on"
-    Option "TappingButtonMap" "lrm"
-EndSection
-#+end_src
-
-** getmail
-
-*** getmailrc
-:PROPERTIES:
-:header-args+: :tangle ~/.getmail/getmailrc
-:END:
-
-#+begin_src conf
-[retriever]
-type = SimplePOP3SSLRetriever
-server = fencepost.gnu.org
-username = aminb
-password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
-port = 995
-use_apop = True
-
-[destination]
-type = Maildir
-path = ~/mail/gnu/Inbox/
-
-[options]
-delete = True
-#+end_src
-
-*** getmail.service
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/getmail.service
-:END:
-
-#+begin_src conf :tangle no
-[Unit]
-Description=getmail service
-
-[Service]
-Type=oneshot
-ExecStart=/usr/bin/getmail
-StandardOutput=syslog
-StandardError=syslog
-#+end_src
-
-*** getmail.timer
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/getmail.timer
-:END:
-
-#+begin_src conf :tangle no
-[Unit]
-Description=getmail timer
-
-[Timer]
-OnCalendar=*:0/30
-Persistent=true
-Unit=getmail.service
-
-[Install]
-WantedBy=timers.target
-#+end_src
 
-** GnuPG
+** i3status
 :PROPERTIES:
-:header-args+: :tangle ~/.gnupg/gpg-agent.conf
+:header-args+: :tangle ~/.config/i3status/config
 :END:
 
-#+begin_src conf
-default-cache-ttl 43200
-max-cache-ttl 43200
+#+begin_src conf :comments none
+# i3status configuration file.
+# see "man i3status" for documentation.
 
-default-cache-ttl-ssh 10800
-max-cache-ttl-ssh 10800
+# It is important that this file is edited as UTF-8.
+# The following line should contain a sharp s:
+# ß
+# If the above line is not correctly displayed, fix your editor first!
 
-# pinentry-program /usr/bin/pinentry-qt
-#+end_src
+general {
+        colors = true
+        interval = 5
+}
 
-** GTK
+# order += "ipv6"
+order += "disk /"
+order += "disk /data"
+order += "wireless _first_"
+# order += "ethernet _first_"
+order += "battery 0"
+order += "volume master"
+order += "load"
+order += "tztime local"
+
+wireless _first_ {
+        format_up = "W:%quality %essid %ip"
+        format_down = "W: down"
+}
 
-*** gtk-2.0
-:PROPERTIES:
-:header-args+: :tangle ~/.gtkrc-2.0
-:END:
+# ethernet _first_ {
+#         # if you use %speed, i3status requires root privileges
+#         format_up = "E: %ip (%speed)"
+#         format_down = "E: down"
+# }
+
+battery 0 {
+        format = "%status %percentage %remaining (%consumption)"
+        path = "/sys/class/power_supply/BAT%d/uevent"
+        low_threshold = "10"
+        threshold_type = "percentage"
+        last_full_capacity = true
+        integer_battery_capacity = true
+        hide_seconds = true
+}
 
-#+begin_src conf
-gtk-theme-name="Greybird"
-gtk-icon-theme-name="Paper"
-gtk-font-name="Ubuntu 10"
-gtk-menu-images=0
-# gtk-key-theme-name = "Emacs"
-#+end_src
+tztime local {
+        format = "%-I:%M%P %a %b %d"
+}
 
-*** gtk-3.0
-:PROPERTIES:
-:header-args+: :tangle ~/.config/gtk-3.0/settings.ini
-:END:
+volume master {
+        format = "♪ %volume"
+        format_muted = "🔇 %volume"
+        device = "pulse"
+}
 
-#+begin_src conf :tangle no
-[Settings]
-gtk-icon-theme-name = Paper
-# gtk-theme-name = Adwaita
+load {
+        format = "%1min"
+}
 
-gtk-theme-name = Greybird
-# gtk-theme-name = Arc-Darker
-# gtk-theme-name = Numix-ArchBlue
+disk "/" {
+        format = "/ %avail"
+}
 
-gtk-font-name = Ubuntu 10
-# gtk-key-theme-name = Emacs
+disk "/data" {
+        format = "/data %avail"
+}
 #+end_src
 
 ** isync
@@ -1029,19 +1067,55 @@ Unit=mbsync.service
 WantedBy=timers.target
 #+end_src
 
-** mpd
+** Latexmk
 :PROPERTIES:
-:header-args+: :tangle ~/.config/mpd/mpd.conf
+:header-args+: :tangle ~/.latexmkrc
 :END:
 
 #+begin_src conf
-# An example configuration file for MPD.
-# Read the user manual for documentation: http://www.musicpd.org/doc/user/
+$pdf_previewer = "start zathura %O %S";
+$clean_ext = "aux out";
 
+# $pdf_update_method = 4;
+# $pdf_update_command = "zathura %O %S";
 
-# Files and directories #######################################################
-#
-# This setting controls the top directory which MPD will search to discover the
+# Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
+# by Ctrl+click in the PDF.
+# Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
+# editor.
+# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
+#+end_src
+
+** libinput
+
+Improve XPS 15 9560's touchpad experience.
+
+# begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
+#+begin_src conf :tangle no
+Section "InputClass"
+    Identifier "libinput touchpad catchall"
+    Driver "libinput"
+    MatchIsTouchpad "on"
+    Option "ClickMethod" "clickfinger"
+    Option "NaturalScrolling" "true"
+    Option "Tapping" "on"
+    Option "TappingButtonMap" "lrm"
+EndSection
+#+end_src
+
+** mpd
+:PROPERTIES:
+:header-args+: :tangle ~/.config/mpd/mpd.conf
+:END:
+
+#+begin_src conf
+# An example configuration file for MPD.
+# Read the user manual for documentation: http://www.musicpd.org/doc/user/
+
+
+# Files and directories #######################################################
+#
+# This setting controls the top directory which MPD will search to discover the
 # available audio files and add them to the daemon's online database. This 
 # setting defaults to the XDG directory, otherwise the music directory will be
 # be disabled and audio files will only be accepted over ipc socket (using
@@ -2216,14 +2290,19 @@ notmuch tag +inbox +unread +latest -new -- tag:new
 notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
 notmuch tag -inbox +lists/haskell-weekly   -- folder:amin/lists/haskell-weekly
 
-notmuch tag -inbox +pay -- folder:amin/pay
+notmuch tag -inbox +pay     -- folder:amin/pay
 notmuch tag -inbox +banking -- folder:amin/banking
+notmuch tag -inbox +work    -- folder:amin/work
 # </aminb>
 
 # <uw>
-notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
-notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
+notmuch tag -inbox +uw/cs136  -- folder:uwaterloo/lists/cs136
+notmuch tag -inbox +uw/cs846  -- folder:uwaterloo/lists/cs846
+notmuch tag -inbox +uw/ece750 -- folder:uwaterloo/lists/ece750
+notmuch tag -inbox +uw/se212  -- folder:uwaterloo/lists/se212
+notmuch tag -inbox +uw/se463  -- folder:uwaterloo/lists/se463
 
+notmuch tag -inbox +lists/alloytools       -- folder:uwaterloo/lists/alloytools
 notmuch tag -inbox +lists/clvsingle        -- folder:uwaterloo/lists/Clvsingle
 notmuch tag -inbox +lists/gsa              -- folder:uwaterloo/lists/GSA
 notmuch tag -inbox +lists/math-grad        -- folder:uwaterloo/lists/Math-grad
@@ -3739,196 +3818,511 @@ input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
     click_method clickfinger
 }
 
-input "1:1:AT_Translated_Set_2_keyboard" {
-    repeat_delay 200
-    repeat_rate 45
-    xkb_layout us,ir
-    xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
-}
+input "1:1:AT_Translated_Set_2_keyboard" {
+    repeat_delay 200
+    repeat_rate 45
+    xkb_layout us,ir
+    xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
+}
+
+
+### Key bindings
+#
+# Basics:
+#
+    # start a terminal
+    bindsym $mod+Return exec $term
+
+    # kill focused window
+    bindsym $mod+Shift+q kill
+
+    # start your launcher
+    bindsym $mod+d exec $menu
+
+    # password manager
+    bindsym $mod2+space exec rofi-pass
+
+    # Drag floating windows by holding down $mod and left mouse button.
+    # Resize them with right mouse button + $mod.
+    # Despite the name, also works for non-floating windows.
+    # Change normal to inverse to use left mouse button for resizing and right
+    # mouse button for dragging.
+    floating_modifier $mod normal
+
+    # reload the configuration file
+    bindsym $mod+Shift+c reload
+
+    # exit sway (logs you out of your wayland session)
+    bindsym $mod+Shift+e exit
+
+    bindsym $mod+apostrophe exec rofi-light        # rofi-based brightness chooser
+    bindsym XF86MonBrightnessUp exec light -A 5    # increase screen brightness
+    bindsym XF86MonBrightnessDown exec light -U 5  # decrease screen brightness
+
+    bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
+    bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
+    bindsym XF86AudioMute exec pamixer --toggle-mute
+    bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
+
+    # original sway workspace switch and window move
+    bindsym $mod+bracketleft workspace prev
+    bindsym $mod+bracketright workspace next
+    bindsym $mod+braceleft move container to workspace prev
+    bindsym $mod+braceright move container to workspace next
+
+    # bspwm-esque workspace switch and window move
+    bindsym $mod2+bracketleft exec sway-ws-util switch prev
+    bindsym $mod2+bracketright exec sway-ws-util switch next
+    bindsym $mod2+braceleft exec sway-ws-util move prev follow
+    bindsym $mod2+braceright exec sway-ws-util move next follow
+#
+# Moving around:
+#
+    # Move your focus around
+    bindsym $mod+$left focus left
+    bindsym $mod+$down focus down
+    bindsym $mod+$up focus up
+    bindsym $mod+$right focus right
+    # or use $mod+[up|down|left|right]
+    bindsym $mod+Left focus left
+    bindsym $mod+Down focus down
+    bindsym $mod+Up focus up
+    bindsym $mod+Right focus right
+
+    # _move_ the focused window with the same, but add Shift
+    bindsym $mod+Shift+$left move left
+    bindsym $mod+Shift+$down move down
+    bindsym $mod+Shift+$up move up
+    bindsym $mod+Shift+$right move right
+    # ditto, with arrow keys
+    bindsym $mod+Shift+Left move left
+    bindsym $mod+Shift+Down move down
+    bindsym $mod+Shift+Up move up
+    bindsym $mod+Shift+Right move right
+#
+# Workspaces:
+#
+    # switch to workspace
+    bindsym $mod+1 workspace 1
+    bindsym $mod+2 workspace 2
+    bindsym $mod+3 workspace 3
+    bindsym $mod+4 workspace 4
+    bindsym $mod+5 workspace 5
+    bindsym $mod+6 workspace 6
+    bindsym $mod+7 workspace 7
+    bindsym $mod+8 workspace 8
+    bindsym $mod+9 workspace 9
+    bindsym $mod+0 workspace 10
+    # move focused container to workspace
+    bindsym $mod+Shift+1 move container to workspace 1
+    bindsym $mod+Shift+2 move container to workspace 2
+    bindsym $mod+Shift+3 move container to workspace 3
+    bindsym $mod+Shift+4 move container to workspace 4
+    bindsym $mod+Shift+5 move container to workspace 5
+    bindsym $mod+Shift+6 move container to workspace 6
+    bindsym $mod+Shift+7 move container to workspace 7
+    bindsym $mod+Shift+8 move container to workspace 8
+    bindsym $mod+Shift+9 move container to workspace 9
+    bindsym $mod+Shift+0 move container to workspace 10
+    # Note: workspaces can have any name you want, not just numbers.
+    # We just use 1-10 as the default.
+#
+# Layout stuff:
+#
+    # You can "split" the current object of your focus with
+    # $mod+b or $mod+v, for horizontal and vertical splits
+    # respectively.
+    bindsym $mod+b splith
+    bindsym $mod+v splitv
+
+    # Switch the current container between different layout styles
+    bindsym $mod+s layout stacking
+    bindsym $mod+w layout tabbed
+    bindsym $mod+e layout toggle split
+
+    # Make the current focus fullscreen
+    bindsym $mod+f fullscreen
+
+    # Toggle the current focus between tiling and floating mode
+    bindsym $mod+Shift+space floating toggle
+
+    # Swap focus between the tiling area and the floating area
+    bindsym $mod+space focus mode_toggle
+
+    # move focus to the parent container
+    bindsym $mod+a focus parent
+#
+# Scratchpad:
+#
+    # Sway has a "scratchpad", which is a bag of holding for windows.
+    # You can send windows there and get them back later.
+
+    # Move the currently focused window to the scratchpad
+    bindsym $mod+Shift+minus move scratchpad
+
+    # Show the next scratchpad window or hide the focused scratchpad window.
+    # If there are multiple scratchpad windows, this command cycles through them.
+    bindsym $mod+minus scratchpad show
+#
+# Resizing containers:
+#
+mode "resize" {
+    # left will shrink the containers width
+    # right will grow the containers width
+    # up will shrink the containers height
+    # down will grow the containers height
+    bindsym $left resize shrink width 10px
+    bindsym $down resize grow height 10px
+    bindsym $up resize shrink height 10px
+    bindsym $right resize grow width 10px
+
+    # ditto, with arrow keys
+    bindsym Left resize shrink width 10px
+    bindsym Down resize grow height 10px
+    bindsym Up resize shrink height 10px
+    bindsym Right resize grow width 10px
+
+    # return to default mode
+    bindsym Return mode "default"
+    bindsym Escape mode "default"
+}
+bindsym $mod+Shift+r mode "resize"
+
+#
+# Status Bar:
+#
+# Read `man 5 sway-bar` for more information about this section.
+bar {
+    position bottom
+    colors {
+        statusline #ffffff
+        background #323232
+        inactive_workspace #32323200 #32323200 #5c5c5c
+    }
+    status_command i3status
+}
+
+include /etc/sway/config.d/*
+#+end_src
+
+** TLP
+
+*** langa
+
+#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "langa")) "/sudo::/etc/default/tlp")
+# ------------------------------------------------------------------------------
+# tlp - Parameters for power saving
+# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
+
+# Hint: some features are disabled by default, remove the leading # to enable
+# them.
+
+# Set to 0 to disable, 1 to enable TLP.
+TLP_ENABLE=1
+
+# Operation mode when no power supply can be detected: AC, BAT.
+# Concerns some desktop and embedded hardware only.
+TLP_DEFAULT_MODE=AC
+
+# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
+# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
+TLP_PERSISTENT_DEFAULT=0
+
+# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
+# Non-zero value enables, zero disables laptop mode.
+DISK_IDLE_SECS_ON_AC=0
+DISK_IDLE_SECS_ON_BAT=2
+
+# Dirty page values (timeouts in secs).
+MAX_LOST_WORK_SECS_ON_AC=15
+MAX_LOST_WORK_SECS_ON_BAT=60
+
+# Hint: CPU parameters below are disabled by default, remove the leading #
+# to enable them, otherwise kernel default values are used.
+
+# Select a CPU frequency scaling governor.
+# Intel Core i processor with intel_pstate driver:
+#   powersave(*), performance.
+# Older hardware with acpi-cpufreq driver:
+#   ondemand(*), powersave, performance, conservative, schedutil.
+# (*) is recommended.
+# Hint: use tlp-stat -p to show the active driver and available governors.
+# Important:
+#   powersave for intel_pstate and ondemand for acpi-cpufreq are power
+#   efficient for *almost all* workloads and therefore kernel and most
+#   distributions have chosen them as defaults. If you still want to change,
+#   you should know what you're doing! You *must* disable your distribution's
+#   governor settings or conflicts will occur.
+#CPU_SCALING_GOVERNOR_ON_AC=powersave
+#CPU_SCALING_GOVERNOR_ON_BAT=powersave
+
+# Set the min/max frequency available for the scaling governor.
+# Possible values strongly depend on your CPU. For available frequencies see
+# the output of tlp-stat -p.
+#CPU_SCALING_MIN_FREQ_ON_AC=0
+#CPU_SCALING_MAX_FREQ_ON_AC=0
+#CPU_SCALING_MIN_FREQ_ON_BAT=0
+#CPU_SCALING_MAX_FREQ_ON_BAT=0
+
+# Set energy performance hints (HWP) for Intel P-state governor:
+#   performance, balance_performance, default, balance_power, power
+# Values are given in order of increasing power saving.
+# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
+CPU_HWP_ON_AC=balance_performance
+CPU_HWP_ON_BAT=balance_power
+
+# Set Intel P-state performance: 0..100 (%).
+# Limit the max/min P-state to control the power dissipation of the CPU.
+# Values are stated as a percentage of the available performance.
+# Requires an Intel Core i processor with intel_pstate driver.
+#CPU_MIN_PERF_ON_AC=0
+#CPU_MAX_PERF_ON_AC=100
+#CPU_MIN_PERF_ON_BAT=0
+#CPU_MAX_PERF_ON_BAT=30
+
+# Set the CPU "turbo boost" feature: 0=disable, 1=allow
+# Requires an Intel Core i processor.
+# Important:
+# - This may conflict with your distribution's governor settings
+# - A value of 1 does *not* activate boosting, it just allows it
+#CPU_BOOST_ON_AC=1
+#CPU_BOOST_ON_BAT=0
+
+# Minimize number of used CPU cores/hyper-threads under light load conditions:
+#   0=disable, 1=enable.
+SCHED_POWERSAVE_ON_AC=0
+SCHED_POWERSAVE_ON_BAT=1
+
+# Kernel NMI Watchdog:
+#   0=disable (default, saves power), 1=enable (for kernel debugging only).
+NMI_WATCHDOG=0
+
+# Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
+# Frequency voltage pairs are written to:
+#   /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
+# CAUTION: only use this, if you thoroughly understand what you are doing!
+#PHC_CONTROLS="F:V F:V F:V F:V"
+
+# Set CPU performance versus energy savings policy:
+#   performance, balance-performance, default, balance-power, power.
+# Values are given in order of increasing power saving.
+# Requires kernel module msr and x86_energy_perf_policy from linux-tools.
+ENERGY_PERF_POLICY_ON_AC=performance
+ENERGY_PERF_POLICY_ON_BAT=balance-power
+
+# Disk devices; separate multiple devices with spaces (default: sda).
+# Devices can be specified by disk ID also (lookup with: tlp diskid).
+DISK_DEVICES="sda sdb"
+
+# Disk advanced power management level: 1..254, 255 (max saving, min, off).
+# Levels 1..127 may spin down the disk; 255 allowable on most drives.
+# Separate values for multiple disks with spaces. Use the special value 'keep'
+# to keep the hardware default for the particular disk.
+DISK_APM_LEVEL_ON_AC="254 254"
+DISK_APM_LEVEL_ON_BAT="128 128"
+
+# Hard disk spin down timeout:
+#   0:        spin down disabled
+#   1..240:   timeouts from 5s to 20min (in units of 5s)
+#   241..251: timeouts from 30min to 5.5 hours (in units of 30min)
+# See 'man hdparm' for details.
+# Separate values for multiple disks with spaces. Use the special value 'keep'
+# to keep the hardware default for the particular disk.
+#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
+#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
+
+# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
+# Separate values for multiple disks with spaces. Use the special value 'keep'
+# to keep the kernel default scheduler for the particular disk.
+#DISK_IOSCHED="cfq cfq"
+
+# AHCI link power management (ALPM) for disk devices:
+#   min_power, med_power_with_dipm(*), medium_power, max_performance.
+# (*) Kernel >= 4.15 required, then recommended.
+# Multiple values separated with spaces are tried sequentially until success.
+SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
+SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
+
+# Exclude host devices from AHCI link power management.
+# Separate multiple hosts with spaces.
+#SATA_LINKPWR_BLACKLIST="host1"
+
+# Runtime Power Management for AHCI host and disks devices:
+#   on=disable, auto=enable.
+# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
+#AHCI_RUNTIME_PM_ON_AC=on
+#AHCI_RUNTIME_PM_ON_BAT=on
+
+# Seconds of inactivity before disk is suspended.
+AHCI_RUNTIME_PM_TIMEOUT=15
+
+# PCI Express Active State Power Management (PCIe ASPM):
+#   default, performance, powersave.
+PCIE_ASPM_ON_AC=performance
+PCIE_ASPM_ON_BAT=powersave
+
+# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
+# auto = mid on BAT, high on AC; default = use hardware defaults.
+RADEON_POWER_PROFILE_ON_AC=high
+RADEON_POWER_PROFILE_ON_BAT=low
+
+# Radeon dynamic power management method (DPM): battery, performance.
+RADEON_DPM_STATE_ON_AC=performance
+RADEON_DPM_STATE_ON_BAT=battery
+
+# Radeon DPM performance level: auto, low, high; auto is recommended.
+RADEON_DPM_PERF_LEVEL_ON_AC=auto
+RADEON_DPM_PERF_LEVEL_ON_BAT=auto
+
+# WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
+WIFI_PWR_ON_AC=off
+WIFI_PWR_ON_BAT=on
+
+# Disable wake on LAN: Y/N.
+WOL_DISABLE=Y
+
+# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
+# A value of 0 disables, >=1 enables power saving (recommended: 1).
+SOUND_POWER_SAVE_ON_AC=0
+SOUND_POWER_SAVE_ON_BAT=0
+
+# Disable controller too (HDA only): Y/N.
+SOUND_POWER_SAVE_CONTROLLER=N
+
+# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
+# Drive can be powered on again by releasing (and reinserting) the eject lever
+# or by pressing the disc eject button on newer models.
+# Note: an UltraBay/MediaBay hard disk is never powered off.
+BAY_POWEROFF_ON_AC=0
+BAY_POWEROFF_ON_BAT=0
+# Optical drive device to power off (default sr0).
+BAY_DEVICE="sr0"
+
+# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
+RUNTIME_PM_ON_AC=on
+RUNTIME_PM_ON_BAT=auto
+
+# Exclude PCI(e) device adresses the following list from Runtime PM
+# (separate with spaces). Use lspci to get the adresses (1st column).
+#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
 
+# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
+# Default when unconfigured is "amdgpu nouveau nvidia radeon" which
+# prevents accidential power-on of dGPU in hybrid graphics setups.
+# Use "" to disable the feature completely.
+# Separate multiple drivers with spaces.
+#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
 
-### Key bindings
-#
-# Basics:
-#
-    # start a terminal
-    bindsym $mod+Return exec $term
+# Set to 0 to disable, 1 to enable USB autosuspend feature.
+USB_AUTOSUSPEND=1
 
-    # kill focused window
-    bindsym $mod+Shift+q kill
+# Exclude listed devices from USB autosuspend (separate with spaces).
+# Use lsusb to get the ids.
+# Note: input devices (usbhid) are excluded automatically
+#USB_BLACKLIST="1111:2222 3333:4444"
 
-    # start your launcher
-    bindsym $mod+d exec $menu
+# Bluetooth devices are excluded from USB autosuspend:
+#   0=do not exclude, 1=exclude.
+USB_BLACKLIST_BTUSB=0
 
-    # Drag floating windows by holding down $mod and left mouse button.
-    # Resize them with right mouse button + $mod.
-    # Despite the name, also works for non-floating windows.
-    # Change normal to inverse to use left mouse button for resizing and right
-    # mouse button for dragging.
-    floating_modifier $mod normal
+# Phone devices are excluded from USB autosuspend:
+#   0=do not exclude, 1=exclude (enable charging).
+USB_BLACKLIST_PHONE=0
 
-    # reload the configuration file
-    bindsym $mod+Shift+c reload
+# Printers are excluded from USB autosuspend:
+#   0=do not exclude, 1=exclude.
+USB_BLACKLIST_PRINTER=1
 
-    # exit sway (logs you out of your wayland session)
-    bindsym $mod+Shift+e exit
+# WWAN devices are excluded from USB autosuspend:
+#   0=do not exclude, 1=exclude.
+USB_BLACKLIST_WWAN=1
 
-    bindsym $mod+apostrophe exec rofi-light        # rofi-based brightness chooser
-    bindsym XF86MonBrightnessUp exec light -A 5    # increase screen brightness
-    bindsym XF86MonBrightnessDown exec light -U 5  # decrease screen brightness
+# Include listed devices into USB autosuspend even if already excluded
+# by the blacklists above (separate with spaces).
+# Use lsusb to get the ids.
+#USB_WHITELIST="1111:2222 3333:4444"
 
-    bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
-    bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
-    bindsym XF86AudioMute exec pamixer --toggle-mute
-    bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
+# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
+# (workaround for USB devices that cause shutdown problems).
+#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
 
-    # original sway workspace switch and window move
-    bindsym $mod+bracketleft workspace prev
-    bindsym $mod+bracketright workspace next
-    bindsym $mod+braceleft move container to workspace prev
-    bindsym $mod+braceright move container to workspace next
+# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
+# on system startup: 0=disable, 1=enable.
+# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
+#   are ignored when this is enabled!
+#RESTORE_DEVICE_STATE_ON_STARTUP=0
+RESTORE_DEVICE_STATE_ON_STARTUP=0
 
-    # bspwm-esque workspace switch and window move
-    bindsym $mod2+bracketleft exec sway-ws-util switch prev
-    bindsym $mod2+bracketright exec sway-ws-util switch next
-    bindsym $mod2+braceleft exec sway-ws-util move prev follow
-    bindsym $mod2+braceright exec sway-ws-util move next follow
-#
-# Moving around:
-#
-    # Move your focus around
-    bindsym $mod+$left focus left
-    bindsym $mod+$down focus down
-    bindsym $mod+$up focus up
-    bindsym $mod+$right focus right
-    # or use $mod+[up|down|left|right]
-    bindsym $mod+Left focus left
-    bindsym $mod+Down focus down
-    bindsym $mod+Up focus up
-    bindsym $mod+Right focus right
+# Radio devices to disable on startup: bluetooth, wifi, wwan.
+# Separate multiple devices with spaces.
+#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
+DEVICES_TO_DISABLE_ON_STARTUP="bluetooth"
 
-    # _move_ the focused window with the same, but add Shift
-    bindsym $mod+Shift+$left move left
-    bindsym $mod+Shift+$down move down
-    bindsym $mod+Shift+$up move up
-    bindsym $mod+Shift+$right move right
-    # ditto, with arrow keys
-    bindsym $mod+Shift+Left move left
-    bindsym $mod+Shift+Down move down
-    bindsym $mod+Shift+Up move up
-    bindsym $mod+Shift+Right move right
-#
-# Workspaces:
-#
-    # switch to workspace
-    bindsym $mod+1 workspace 1
-    bindsym $mod+2 workspace 2
-    bindsym $mod+3 workspace 3
-    bindsym $mod+4 workspace 4
-    bindsym $mod+5 workspace 5
-    bindsym $mod+6 workspace 6
-    bindsym $mod+7 workspace 7
-    bindsym $mod+8 workspace 8
-    bindsym $mod+9 workspace 9
-    bindsym $mod+0 workspace 10
-    # move focused container to workspace
-    bindsym $mod+Shift+1 move container to workspace 1
-    bindsym $mod+Shift+2 move container to workspace 2
-    bindsym $mod+Shift+3 move container to workspace 3
-    bindsym $mod+Shift+4 move container to workspace 4
-    bindsym $mod+Shift+5 move container to workspace 5
-    bindsym $mod+Shift+6 move container to workspace 6
-    bindsym $mod+Shift+7 move container to workspace 7
-    bindsym $mod+Shift+8 move container to workspace 8
-    bindsym $mod+Shift+9 move container to workspace 9
-    bindsym $mod+Shift+0 move container to workspace 10
-    # Note: workspaces can have any name you want, not just numbers.
-    # We just use 1-10 as the default.
-#
-# Layout stuff:
-#
-    # You can "split" the current object of your focus with
-    # $mod+b or $mod+v, for horizontal and vertical splits
-    # respectively.
-    bindsym $mod+b splith
-    bindsym $mod+v splitv
+# Radio devices to enable on startup: bluetooth, wifi, wwan.
+# Separate multiple devices with spaces.
+#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
 
-    # Switch the current container between different layout styles
-    bindsym $mod+s layout stacking
-    bindsym $mod+w layout tabbed
-    bindsym $mod+e layout toggle split
+# Radio devices to disable on shutdown: bluetooth, wifi, wwan.
+# (workaround for devices that are blocking shutdown).
+#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
 
-    # Make the current focus fullscreen
-    bindsym $mod+f fullscreen
+# Radio devices to enable on shutdown: bluetooth, wifi, wwan.
+# (to prevent other operating systems from missing radios).
+#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
 
-    # Toggle the current focus between tiling and floating mode
-    bindsym $mod+Shift+space floating toggle
+# Radio devices to enable on AC: bluetooth, wifi, wwan.
+#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
 
-    # Swap focus between the tiling area and the floating area
-    bindsym $mod+space focus mode_toggle
+# Radio devices to disable on battery: bluetooth, wifi, wwan.
+#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
 
-    # move focus to the parent container
-    bindsym $mod+a focus parent
-#
-# Scratchpad:
-#
-    # Sway has a "scratchpad", which is a bag of holding for windows.
-    # You can send windows there and get them back later.
+# Radio devices to disable on battery when not in use (not connected):
+#   bluetooth, wifi, wwan.
+#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
 
-    # Move the currently focused window to the scratchpad
-    bindsym $mod+Shift+minus move scratchpad
+# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
+# required). Charging starts when the remaining capacity falls below the
+# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
+# Main / Internal battery (values in %)
+#START_CHARGE_THRESH_BAT0=75
+#STOP_CHARGE_THRESH_BAT0=80
+# Ultrabay / Slice / Replaceable battery (values in %)
+#START_CHARGE_THRESH_BAT1=75
+#STOP_CHARGE_THRESH_BAT1=80
 
-    # Show the next scratchpad window or hide the focused scratchpad window.
-    # If there are multiple scratchpad windows, this command cycles through them.
-    bindsym $mod+minus scratchpad show
-#
-# Resizing containers:
-#
-mode "resize" {
-    # left will shrink the containers width
-    # right will grow the containers width
-    # up will shrink the containers height
-    # down will grow the containers height
-    bindsym $left resize shrink width 10px
-    bindsym $down resize grow height 10px
-    bindsym $up resize shrink height 10px
-    bindsym $right resize grow width 10px
+# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
+#RESTORE_THRESHOLDS_ON_BAT=1
 
-    # ditto, with arrow keys
-    bindsym Left resize shrink width 10px
-    bindsym Down resize grow height 10px
-    bindsym Up resize shrink height 10px
-    bindsym Right resize grow width 10px
+# ------------------------------------------------------------------------------
+# tlp-rdw - Parameters for the radio device wizard
+# Possible devices: bluetooth, wifi, wwan.
 
-    # return to default mode
-    bindsym Return mode "default"
-    bindsym Escape mode "default"
-}
-bindsym $mod+Shift+r mode "resize"
+# Hints:
+# - Parameters are disabled by default, remove the leading # to enable them
+# - Separate multiple radio devices with spaces
 
-#
-# Status Bar:
-#
-# Read `man 5 sway-bar` for more information about this section.
-bar {
-    position bottom
-    colors {
-        statusline #ffffff
-        background #323232
-        inactive_workspace #32323200 #32323200 #5c5c5c
-    }
-    status_command i3gs ~/.config/i3gs/config
-}
+# Radio devices to disable on connect.
+#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
+#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
+#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
 
-include /etc/sway/config.d/*
-#+end_src
+# Radio devices to enable on disconnect.
+#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
+#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
+#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
 
-** TLP
+# Radio devices to enable/disable when docked.
+#DEVICES_TO_ENABLE_ON_DOCK=""
+#DEVICES_TO_DISABLE_ON_DOCK=""
+
+# Radio devices to enable/disable when undocked.
+#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
+#DEVICES_TO_DISABLE_ON_UNDOCK=""
+#+end_src
 
-*** TODO enigma
-*** plasma
+*** pary
 
-#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/default/tlp")
+#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "pary")) "/sudo::/etc/default/tlp")
 # ------------------------------------------------------------------------------
 # tlp - Parameters for power saving
 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
@@ -4852,7 +5246,7 @@ ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
 setopt globdots
 
 source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
-source ~/.zsh/zsh-autopair/autopair.zsh
+# source ~/.zsh/zsh-autopair/autopair.zsh
 
 
 ### fzf ###
@@ -4911,7 +5305,7 @@ exact brightness value.
 :header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/sh"
 :END:
 
-#+begin_src sh
+#+begin_src sh :tangle no
 dbus_send() {
 	label=$1
 	dbus-send --print-reply=literal --system \
@@ -5074,7 +5468,7 @@ gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
 :header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh"
 :END:
 
-#+begin_src sh
+#+begin_src sh :tangle no
 cur_vol=$(pamixer --get-volume)
 
 if [ $(pamixer --get-mute) = true ]; then