From: Amin Bandali Date: Sun, 6 May 2018 05:51:32 +0000 (-0400) Subject: [other] spring cleaning: remove vestigial and old stuff X-Git-Url: https://git.shemshak.org/gitweb.cgi/~bandali/configs/commitdiff_plain/0c892839718a0c8c0840ada2dea1c90e3d5b352e [other] spring cleaning: remove vestigial and old stuff --- diff --git a/other/modprobe/hid_apple.conf b/other/modprobe/hid_apple.conf deleted file mode 100644 index 25c96dc..0000000 --- a/other/modprobe/hid_apple.conf +++ /dev/null @@ -1 +0,0 @@ -options hid_apple iso_layout=0 diff --git a/other/modprobe/snd_hda_intel.conf b/other/modprobe/snd_hda_intel.conf deleted file mode 100644 index 8bf2a4f..0000000 --- a/other/modprobe/snd_hda_intel.conf +++ /dev/null @@ -1 +0,0 @@ -options snd_hda_intel power_save=1 diff --git a/other/modprobe/usbcore.conf b/other/modprobe/usbcore.conf deleted file mode 100644 index db61794..0000000 --- a/other/modprobe/usbcore.conf +++ /dev/null @@ -1 +0,0 @@ -options usbcore autosuspend=1 diff --git a/other/systemd/mba6x-backlight.service b/other/systemd/mba6x-backlight.service deleted file mode 100644 index 8fbfde1..0000000 --- a/other/systemd/mba6x-backlight.service +++ /dev/null @@ -1,18 +0,0 @@ -# copy to /etc/systemd/system/ (at least on Arch Linux) - -[Unit] -Description=Load/Save Screen Backlight Brightness of backlight:mba6x_backlight -DefaultDependencies=no -RequiresMountsFor=/var/lib/systemd/backlight -Conflicts=shutdown.target -After=systemd-remount-fs.service -Before=sysinit.target shutdown.target - -[Service] -Type=oneshot -RemainAfterExit=yes -ExecStart=/usr/lib/systemd/systemd-backlight load backlight:mba6x_backlight -ExecStop=/usr/lib/systemd/systemd-backlight save backlight:mba6x_backlight - -[Install] -WantedBy=multi-user.target diff --git a/other/systemd/powertop.service b/other/systemd/powertop.service deleted file mode 100644 index d1d41cb..0000000 --- a/other/systemd/powertop.service +++ /dev/null @@ -1,11 +0,0 @@ -# /etc/systemd/system/powertop.service - -[Unit] -Description=Powertop tunings - -[Service] -Type=oneshot -ExecStart=/usr/bin/powertop --auto-tune - -[Install] -WantedBy=multi-user.target \ No newline at end of file diff --git a/other/systemd/suppress-gpe-66-4e.service b/other/systemd/suppress-gpe-66-4e.service deleted file mode 100644 index 2d44f14..0000000 --- a/other/systemd/suppress-gpe-66-4e.service +++ /dev/null @@ -1,11 +0,0 @@ -# copy to /etc/systemd/system/ (at least on Arch Linux) - -[Unit] -Description=KernGPE66 - -[Service] -ExecStart=/bin/sh -c "echo disable > /sys/firmware/acpi/interrupts/gpe66 && echo disable > /sys/firmware/acpi/interrupts/gpe4E" -Type=oneshot - -[Install] -WantedBy=multi-user.target diff --git a/other/tlp/etc/default/tlp b/other/tlp/etc/default/tlp deleted file mode 100644 index 9b411e3..0000000 --- a/other/tlp/etc/default/tlp +++ /dev/null @@ -1,298 +0,0 @@ -# ------------------------------------------------------------------------------ -# tlp - Parameters for power saving -# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html - -# Hint: some features are disabled by default, remove the leading # to enable -# them. - -# Set to 0 to disable, 1 to enable TLP. -TLP_ENABLE=1 - -# Operation mode when no power supply can be detected: AC, BAT -# Concerns some desktop and embedded hardware only. -TLP_DEFAULT_MODE=AC - -# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE -# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC -TLP_PERSISTENT_DEFAULT=0 - -# Seconds laptop mode has to wait after the disk goes idle before doing a sync. -# Non-zero value enables, zero disables laptop mode. -DISK_IDLE_SECS_ON_AC=0 -DISK_IDLE_SECS_ON_BAT=2 - -# Dirty page values (timeouts in secs). -MAX_LOST_WORK_SECS_ON_AC=15 -MAX_LOST_WORK_SECS_ON_BAT=60 - -# Hint: CPU parameters below are disabled by default, remove the leading # -# to enable them, otherwise kernel default values are used. - -# Select a CPU frequency scaling governor. -# Intel Core i processor with intel_pstate driver: -# powersave(*), performance -# Older hardware with acpi-cpufreq driver: -# ondemand(*), powersave, performance, conservative -# (*) is recommended. -# Hint: use tlp-stat -p to show the active driver and available governors. -# Important: -# You *must* disable your distribution's governor settings or conflicts will -# occur. ondemand is sufficient for *almost all* workloads, you should know -# what you're doing! -CPU_SCALING_GOVERNOR_ON_AC=performance -CPU_SCALING_GOVERNOR_ON_BAT=powersave - -# Set the min/max frequency available for the scaling governor. -# Possible values strongly depend on your CPU. For available frequencies see -# the output of tlp-stat -p. -CPU_SCALING_MIN_FREQ_ON_AC=800000 -CPU_SCALING_MAX_FREQ_ON_AC=3300000 -CPU_SCALING_MIN_FREQ_ON_BAT=800000 -CPU_SCALING_MAX_FREQ_ON_BAT=3300000 - -# Set energy performance hints (HWP) for Intel P-state governor: -# default, performance, balance_performance, balance_power, power -# Values are given in order of increasing power saving. -# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required. -CPU_HWP_ON_AC=balance_performance -CPU_HWP_ON_BAT=balance_power - -# Set Intel P-state performance: 0..100 (%) -# Limit the max/min P-state to control the power dissipation of the CPU. -# Values are stated as a percentage of the available performance. -# Requires an Intel Core i processor with intel_pstate driver. -CPU_MIN_PERF_ON_AC=0 -CPU_MAX_PERF_ON_AC=100 -CPU_MIN_PERF_ON_BAT=0 -CPU_MAX_PERF_ON_BAT=100 - -# Set the CPU "turbo boost" feature: 0=disable, 1=allow -# Requires an Intel Core i processor. -# Important: -# - This may conflict with your distribution's governor settings -# - A value of 1 does *not* activate boosting, it just allows it -CPU_BOOST_ON_AC=1 -CPU_BOOST_ON_BAT=1 - -# Minimize number of used CPU cores/hyper-threads under light load conditions -SCHED_POWERSAVE_ON_AC=0 -SCHED_POWERSAVE_ON_BAT=1 - -# Kernel NMI Watchdog: -# 0=disable (default, saves power), 1=enable (for kernel debugging only) -NMI_WATCHDOG=0 - -# Change CPU voltages aka "undervolting" - Kernel with PHC patch required -# Frequency voltage pairs are written to: -# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls -# CAUTION: only use this, if you thoroughly understand what you are doing! -#PHC_CONTROLS="F:V F:V F:V F:V" - -# Set CPU performance versus energy savings policy: -# performance, normal, powersave -# Requires kernel module msr and x86_energy_perf_policy from linux-tools -ENERGY_PERF_POLICY_ON_AC=performance -ENERGY_PERF_POLICY_ON_BAT=powersave - -# Hard disk devices; separate multiple devices with spaces (default: sda). -# Devices can be specified by disk ID also (lookup with: tlp diskid). -DISK_DEVICES="sda" - -# Hard disk advanced power management level: 1..254, 255 (max saving, min, off) -# Levels 1..127 may spin down the disk; 255 allowable on most drives. -# Separate values for multiple disks with spaces. Use the special value 'keep' -# to keep the hardware default for the particular disk. -DISK_APM_LEVEL_ON_AC="254" -DISK_APM_LEVEL_ON_BAT="128" - -# Hard disk spin down timeout: -# 0: spin down disabled -# 1..240: timeouts from 5s to 20min (in units of 5s) -# 241..251: timeouts from 30min to 5.5 hours (in units of 30min) -# See 'man hdparm' for details. -# Separate values for multiple disks with spaces. Use the special value 'keep' -# to keep the hardware default for the particular disk. -#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0" -#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0" - -# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq); -# Separate values for multiple disks with spaces. Use the special value 'keep' -# to keep the kernel default scheduler for the particular disk. -#DISK_IOSCHED="cfq cfq" - -# SATA aggressive link power management (ALPM): -# min_power, medium_power, max_performance -#SATA_LINKPWR_ON_AC=max_performance -#SATA_LINKPWR_ON_BAT=min_power - -# Exclude SATA host devices from link power management. -# Separate multiple hosts with spaces. -#SATA_LINKPWR_BLACKLIST="host1" - -# Runtime Power Management for AHCI controllers and disks: -# on=disable, auto=enable -# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss -#AHCI_RUNTIME_PM_ON_AC=on -#AHCI_RUNTIME_PM_ON_BAT=on - -# Seconds of inactivity before disk is suspended -AHCI_RUNTIME_PM_TIMEOUT=15 - -# PCI Express Active State Power Management (PCIe ASPM): -# default, performance, powersave -PCIE_ASPM_ON_AC=performance -PCIE_ASPM_ON_BAT=powersave - -# Radeon graphics clock speed (profile method): low, mid, high, auto, default; -# auto = mid on BAT, high on AC; default = use hardware defaults. -# (Kernel >= 2.6.35 only, open-source radeon driver explicitly) -#RADEON_POWER_PROFILE_ON_AC=high -#RADEON_POWER_PROFILE_ON_BAT=low - -# Radeon dynamic power management method (DPM): battery, performance -# (Kernel >= 3.11 only, requires boot option radeon.dpm=1) -#RADEON_DPM_STATE_ON_AC=performance -#RADEON_DPM_STATE_ON_BAT=battery - -# Radeon DPM performance level: auto, low, high; auto is recommended. -#RADEON_DPM_PERF_LEVEL_ON_AC=auto -#RADEON_DPM_PERF_LEVEL_ON_BAT=auto - -# WiFi power saving mode: on=enable, off=disable; not supported by all adapters. -WIFI_PWR_ON_AC=off -WIFI_PWR_ON_BAT=on - -# Disable wake on LAN: Y/N -WOL_DISABLE=Y - -# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs). -# A value of 0 disables, >=1 enables power saving. -SOUND_POWER_SAVE_ON_AC=0 -SOUND_POWER_SAVE_ON_BAT=1 - -# Disable controller too (HDA only): Y/N -SOUND_POWER_SAVE_CONTROLLER=N - -# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable. -# Drive can be powered on again by releasing (and reinserting) the eject lever -# or by pressing the disc eject button on newer models. -# Note: an UltraBay/MediaBay hard disk is never powered off. -#BAY_POWEROFF_ON_AC=0 -#BAY_POWEROFF_ON_BAT=0 -# Optical drive device to power off (default sr0). -#BAY_DEVICE="sr0" - -# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable -RUNTIME_PM_ON_AC=on -RUNTIME_PM_ON_BAT=auto - -# Exclude PCI(e) device adresses the following list from Runtime PM -# (separate with spaces). Use lspci to get the adresses (1st column). -#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6" - -# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM. -# Default when unconfigured is "amdgpu nouveau nvidia radeon" which -# prevents accidential power-on of dGPU in hybrid graphics setups. -# Use "" to disable the feature completely. -# Separate multiple drivers with spaces. -#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon" - -# Set to 0 to disable, 1 to enable USB autosuspend feature. -USB_AUTOSUSPEND=1 - -# Exclude listed devices from USB autosuspend (separate with spaces). -# Use lsusb to get the ids. -# Note: input devices (usbhid) are excluded automatically -#USB_BLACKLIST="1111:2222 3333:4444" - -# Bluetooth devices are excluded from USB autosuspend: -# 0=do not exclude, 1=exclude -USB_BLACKLIST_BTUSB=0 - -# Phone devices are excluded from USB autosuspend: -# 0=do not exclude, 1=exclude (enable charging) -USB_BLACKLIST_PHONE=0 - -# WWAN devices are excluded from USB autosuspend: -# 0=do not exclude, 1=exclude -USB_BLACKLIST_WWAN=1 - -# Include listed devices into USB autosuspend even if already excluded -# by the blacklists above (separate with spaces). -# Use lsusb to get the ids. -#USB_WHITELIST="1111:2222 3333:4444" - -# Set to 1 to disable autosuspend before shutdown, 0 to do nothing -# (workaround for USB devices that cause shutdown problems). -#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1 - -# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown -# on system startup: 0=disable, 1=enable. -# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below -# are ignored when this is enabled! -RESTORE_DEVICE_STATE_ON_STARTUP=0 - -# Radio devices to disable on startup: bluetooth, wifi, wwan. -# Separate multiple devices with spaces. -#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan" - -# Radio devices to enable on startup: bluetooth, wifi, wwan. -# Separate multiple devices with spaces. -#DEVICES_TO_ENABLE_ON_STARTUP="wifi" - -# Radio devices to disable on shutdown: bluetooth, wifi, wwan -# (workaround for devices that are blocking shutdown). -#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan" - -# Radio devices to enable on shutdown: bluetooth, wifi, wwan -# (to prevent other operating systems from missing radios). -#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan" - -# Radio devices to enable on AC: bluetooth, wifi, wwan -#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan" - -# Radio devices to disable on battery: bluetooth, wifi, wwan -#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan" - -# Radio devices to disable on battery when not in use (not connected): -# bluetooth, wifi, wwan -#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan" - -# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module -# required). Charging starts when the remaining capacity falls below the -# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value. -# Main / Internal battery (values in %) -#START_CHARGE_THRESH_BAT0=75 -#STOP_CHARGE_THRESH_BAT0=80 -# Ultrabay / Slice / Replaceable battery (values in %) -#START_CHARGE_THRESH_BAT1=75 -#STOP_CHARGE_THRESH_BAT1=80 - -# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable -#RESTORE_THRESHOLDS_ON_BAT=1 - -# ------------------------------------------------------------------------------ -# tlp-rdw - Parameters for the radio device wizard -# Possible devices: bluetooth, wifi, wwan - -# Hints: -# - Parameters are disabled by default, remove the leading # to enable them. -# - Separate multiple radio devices with spaces. - -# Radio devices to disable on connect. -#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan" -#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan" -#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi" - -# Radio devices to enable on disconnect. -#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan" -#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT="" -#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT="" - -# Radio devices to enable/disable when docked. -#DEVICES_TO_ENABLE_ON_DOCK="" -#DEVICES_TO_DISABLE_ON_DOCK="" - -# Radio devices to enable/disable when undocked. -#DEVICES_TO_ENABLE_ON_UNDOCK="wifi" -#DEVICES_TO_DISABLE_ON_UNDOCK=""