#+title: sources of aminb.org's pages and posts
#+hugo_base_dir: ..
#+seq_todo: TODO DRAFT DONE
#+property: header-args :eval never-export
#+options: author:nil
#+macro: abbr @@html:$1@@
#+macro: span @@html:$2@@
* Pages
:PROPERTIES:
:EXPORT_HUGO_SECTION: /
:END:
** Home
:PROPERTIES:
:EXPORT_FILE_NAME: _index
:END:
I'm a [[/uw][graduate student]] in the [[https://watform.uwaterloo.ca][WatForm]] group at University of Waterloo,
supervised by [[https://cs.uwaterloo.ca/~nday/][Dr. Nancy Day]]. I'm interested in using formal methods,
especially type systems, to help make software more reliable.
** CV
:PROPERTIES:
:EXPORT_FILE_NAME: cv
:EXPORT_HUGO_MENU: :menu topnav :weight 10
:END:
My academic {{{abbr(CV)}}} is available as [[/cv.pdf][cv.pdf]],
and an outdated professional resume is available as [[/resume.pdf][resume.pdf]] as
well.
I'm interested in functional programming and functional languages,
type systems, and formal methods in general. I love writing Haskell
and I'm looking into Rust and Lean as well. Feel free to [[/contact][drop me a
line]] if you like to geek out about any of the above.
** DONE Now
CLOSED: [2018-09-04 Tue 10:53]
:PROPERTIES:
:EXPORT_FILE_NAME: now
:EXPORT_HUGO_AUTO_SET_LASTMOD: t
:EXPORT_HUGO_MENU: :menu topnav :weight 20
:EXPORT_HUGO_CUSTOM_FRONT_MATTER: :customTitle "What I'm doing now"
:END:
This is my [[https://nownownow.com/about][now page]].
I'm currently doing my third semester as a [[/uw][graduate student]] in the
Waterloo Formal Methods group at University of Waterloo. I'm also
TA'ing [[https://www.student.cs.uwaterloo.ca/~se212/][SE 212: Logic and Computation]], taught by my supervisor, Nancy.
In my spare time, I write [[https://www.gnu.org/philosophy/free-sw.en.html][free software]] (projects page coming soon),
and tend to various tasks as a GNU webmaster. I've also been picking
up the guitar, after giving up on my longtime dream of being a
pianist, at least for now.
This update was on {{< lastmod >}}.
** TODO Projects
** DONE Contact
CLOSED: [2018-09-03 Mon 20:44]
:PROPERTIES:
:EXPORT_FILE_NAME: contact
:EXPORT_HUGO_MENU: :menu topnav :weight 40
:EXPORT_HUGO_CUSTOM_FRONT_MATTER: :customTitle "Say hello!"
:END:
#+macro: xmpp @@html:$1@@
You can contact me via email or through my accounts on various online
platforms.
*** Contact info
- [[mailto:amin@aminb.org][amin@aminb.org]]
- [[mailto:amin@gnu.org][amin@gnu.org]], I'm a volunteer [[https://www.gnu.org/people/webmeisters.html#aminb][GNU webmaster]]
- [[mailto:abandali@uwaterloo.ca][abandali@uwaterloo.ca]], I'm a [[/uw][grad student]] @ UW
- gpg key: [[https://pgp.surfnet.nl/pks/lookup?op=vindex&fingerprint=on&search=0xD1FBA36627D65876][CDDE 75F9 0353 8E71 813C DA27 D1FB A366 27D6 5876]]
- aminb on [[https://freenode.net][freenode]] and [[https://wiki.mozilla.org/IRC][moznet]] IRC
- [[https://matrix.to/#/@aminb:matrix.org][@aminb:matrix.org]] on Matrix
- {{{xmpp(aminb@member.fsf.org)}}} via XMPP
- [[https://pleroma.site/users/aminb][aminb@pleroma.site]] on the [[https://en.wikipedia.org/wiki/Fediverse][fediverse]]
*** Other online places
- [[https://git.sr.ht/%257Eaminb][~aminb]] on [[https://sr.ht][sr.ht]]
- [[https://lobste.rs/u/aminb][aminb]] on Lobsters
- [[https://gitlab.com/aminb][aminb]] on GitLab
- [[https://keybase.io/amin][amin]] on Keybase
- [[https://news.ycombinator.com/user?id=aban][aban]] on HN
- [[https://www.reddit.com/u/aminb][aminb]] on Reddit
- +[[https://github.com/aminb][aminb]] on GitHub+
- +[[https://twitter.com/aminban][aminban]] on Twitter+
** Colophon
:PROPERTIES:
:EXPORT_FILE_NAME: colophon
:END:
#+macro: light @@html:@@
#+macro: ccbysa @@html:Creative Commons Attribution-ShareAlike 4.0 International @@{{{ccbysa-img}}}@@html:@@
#+macro: ccbysa-img @@html:@@
This is my personal website, previous versions of which I've ran on
different domains since 2012. The last version was generated using
[[https://www.romanzolotarev.com/ssg.html][ssg]] (shout out to Roman Zolotarev), but I've since ported it to GNU
Emacs + Org mode.
The sources are available on https://git.sr.ht/~aminb/aminb.org. The
site is automatically generated on each =git push= using the
[[https://builds.sr.ht][builds.sr.ht]] service (see the [[https://git.sr.ht/~aminb/aminb.org/tree/.build.yml][=.build.yml=]] build manifest) and is
deployed to my server, where it's served by [[https://www.nginx.com][Nginx]] on [[https://www.debian.org][Debian GNU/Linux]].
*** Night mode
To toggle night mode, click on {{{light}}}, which is always available
on the top navigation menu. It saves its state in a browser cookie,
other than that no JavaScript is required to use this website.
*** Copyright and Licenses
:PROPERTIES:
:CUSTOM_ID: copyright
:END:
The source code for this site is licensed under version 3 (or, at your
option, any later version) of the [[https://gnu.org/licenses/gpl.html][GNU General Public License]] (see the
[[https://git.sr.ht/~aminb/aminb.org/tree/COPYING][=COPYING=]] file). The contents of the website are licensed under a
{{{ccbysa}}} license.
** Search
:PROPERTIES:
:EXPORT_HUGO_SECTION: /
:EXPORT_FILE_NAME: search
:EXPORT_HUGO_LAYOUT: search
:EXPORT_HUGO_OUTPUTS: html json
:EXPORT_HUGO_CUSTOM_FRONT_MATTER: :sitemap '((priority . 0.1))
:END:
Results from static site search implemented using /Fusejs/, /jquery/
and /mark.js/. -- [[https://gist.github.com/eddiewebb/735feb48f50f0ddd65ae5606a1cb41ae][Source]]
* Posts
:PROPERTIES:
:EXPORT_HUGO_SECTION: post
:EXPORT_HUGO_AUTO_SET_LASTMOD: t
:END:
** Arch GNU/Linux on MacBook Air 2013 :arch:macbook:
:PROPERTIES:
:EXPORT_FILE_NAME: arch-macbook-air
:EXPORT_DATE: 2016-11-01
:EXPORT_OPTIONS: ^:{}
:EXPORT_HUGO_ALIASES: /2016/11/arch-macbook-air
:EXPORT_HUGO_CUSTOM_FRONT_MATTER: :toc true
:END:
This post summarizes how I install and dual-boot Arch GNU/Linux with
Full-Disk Encryption alongside macOS. It is not meant to be a
replacement for the [[https://wiki.archlinux.org/index.php/installation_guide][Installation Guide]] or the former [[https://csdietz.github.io/arch-beginner-guide/][Beginner's Guide]].
Rather, it mostly serves as a small summary with a few useful notes
about the gotchas.
So, make sure you understand what you type into your terminal. If you
don't, checking out the Arch wiki should probably be your first step.
/Note:/ you will need internet access throughout the installation and
the MacBook Air's WiFi doesn't work out of the box on Arch. I
recommend using your phone's USB Tethering (if it does support it), or
using an Ethernet-USB adapter.
*** Shrinking the macOS partition
The first step I take is resizing the HFS+ macOS partition to make
room for the new {{{abbr(GNU/Linux)}}} installation. There are plenty
of tutorials on how to do this using macOS's Disk Utility, so do that
and then come back!
*** Creating a bootable Arch Installer USB
There are different ways of creating a bootable Arch USB, all
documented on the [[https://wiki.archlinux.org/index.php/USB_flash_installation_media][USB flash installation media]] page on the Arch wiki,
but the simplest one is using =dd= if you already have access to
another UNIX system.
{{{span(red,Warning:)}}} make sure you backup the data on your flash
drive, as =dd= will irrevocably destroy all data on it.
Use =lsblk= to find the name (block device) of your USB drive, then
run =dd= (as root) as shown below:
#+begin_src bash
dd bs=4M if=/path/to/archlinux.iso of=/dev/sdx status=progress && sync
#+end_src
Replace =/path/to/archlinux.iso= with the path to the Arch image you
have downloaded, and =/dev/sdx= with your drive.
*** Booting up from the USB
After creating the install USB, reboot your laptop and hold the alt
key and boot into the USB.
When booting is complete and you're presented with the prompt, it's a
good time to make sure you're connected to the internet (see the
/note/ at the top of this post).
Use =ping= to verify that you've established a connection:
#+begin_src bash
ping archlinux.org
#+end_src
*** Updating the system clock
Once you're connected to the internet, make sure the system clock is
accurate:
#+begin_src bash
timedatectl set-ntp true # start and enable systemd-timesyncd
#+end_src
You can check the service status using =timedatectl status=.
*** Partitioning
:PROPERTIES:
:CUSTOM_ID: partitioning
:END:
I won't dive into partitioning and instead, I'll refer you to the
[[https://wiki.archlinux.org/index.php/Partitioning][Partitioning]] page of Arch wiki. Of the available partitioning tools, I
personally prefer =cfdisk=.
*** Setting up LVM & LUKS
I use a [[https://wiki.archlinux.org/index.php/Dm-crypt/Encrypting_an_entire_system#LVM_on_LUKS][LVM on LUKS]] setup, where I set up LVM on top of the encrypted
partition.
First, let's set up the underlying encrypted partition:
#+begin_src bash
cryptsetup -v --cipher aes-xts-plain64 --key-size 512 --hash sha512 \
--iter-time 5000 --use-urandom -y luksFormat /dev/sdaX
#+end_src
where =/dev/sdaX= is the partition you created in the last step
(e.g. =/dev/sda4=). For more information about the =cryptsetup=
options, see the [[https://wiki.archlinux.org/index.php/Dm-crypt/Device_encryption#Encryption_options_for_LUKS_mode][LUKS encryption options]].
Then we open the container:
#+begin_src bash
cryptsetup open --type luks /dev/sdaX lvm
#+end_src
Now it's time to use lvm and prepare the logical volume(s):
#+begin_src bash
pvcreate /dev/mapper/lvm
vgcreate vg /dev/mapper/lvm
lvcreate --extents +100%FREE -n root vg
#+end_src
This will create a physical volume on the mapping we just opened,
create a volume group named =vg= on the physical volume, and create a
logical volume named =root= that spans the entire volume group. More
complex setups are possible thanks to the great flexibility of lvm.
We now format the logical volume with =ext4=:
#+begin_src bash
mkfs.ext4 /dev/mapper/vg-root
#+end_src
*** Installing the base system
Let's mount the logical volume, make a directory for the mount point
of the boot partition, and mount the boot partition (=/dev/sda1=):
#+begin_src bash
mount /dev/mapper/vg-root /mnt
mkdir /mnt/boot
mount /dev/sda1 /mnt/boot
#+end_src
Finally, let's install the base system (and optionally =base-devel=):
#+begin_src bash
pacstrap /mnt base base-devel
#+end_src
*** Configuring the system
Let's generate the fstab:
#+begin_src bash
genfstab -U /mnt >> /mnt/etc/fstab
#+end_src
Use your favorite terminal-based editor, edit the fstab file and add
the =discard= option for the root partition to enable TRIM on the SSD.
Now we change root into our newly installed system and will configure
it. Adjust these according to your own setup.
#+begin_src bash
arch-chroot /mnt /bin/bash
passwd # set the root password
echo myhostname > /etc/hostname # set the hostname
ln -s /usr/share/zoneinfo/Canada/Eastern /etc/localtime # time zone
hwclock --systohc --utc # write system clock to hardware clock (UTC)
useradd -m -G wheel -s /bin/bash myuser # create myuser
passwd myuser # set the password for myuser
echo "myuser ALL=(ALL) NOPASSWD: ALL" >> /etc/sudoers.d/myuser
# uncomment en_US.UTF-8 UTF-8 and other needed locales in /etc/locale.gen
locale-gen
echo LANG=en_US.UTF-8 > /etc/locale.conf
export LANG=en_US.UTF-8
#+end_src
Then adjust the initramfs hooks in =/etc/mkinitcpio.conf= and enable
the =encrypt= and =lvm2= hooks, and make sure =keyboard= is available
before =encrypt= so you can actually type in the LUKS password when
booting. Your =HOOKS= line should look similar to this:
#+begin_src
HOOKS="base udev autodetect modconf block keyboard encrypt lvm2 filesystems fsck"
#+end_src
After adjusting the hooks, build the initramfs:
#+begin_src bash
mkinitcpio -p linux
#+end_src
Now, install the =intel-ucode= package. We'll configure the bootloader
to enable intel microcode updates.
#+begin_src bash
pacman -S intel-ucode
#+end_src
Create the =/boot/loader/loader.conf= with the following content
(adjust the timeout to your liking):
#+begin_src
default arch
timeout 3
#+end_src
Then create the entry for Arch:
#+begin_src bash
mkdir -p /boot/loader/entries
touch /boot/loader/entries/arch.conf
#+end_src
Now edit =/boot/loader/entries/arch.conf= to specify the Arch entry:
#+begin_src
title Arch GNU/Linux
linux /vmlinuz-linux
initrd /intel-ucode.img
initrd /initramfs-linux.img
options cryptdevice=/dev/sdaX:vg:allow-discards root=/dev/mapper/vg-root rw
#+end_src
Again, =/dev/sdaX= is the partition you created in the [[#partitioning][partitioning]]
step as the underlying encrypted partition.
Finally, install the bootloader, exit the chroot, umount and reboot!
#+begin_src bash
bootctl install
exit
umount -R /mnt
reboot
#+end_src
*** Post-installation recommendations
Congratulations! You now have a minimal Arch installation.
At this point, I usually install my favorite AUR helper, [[https://aur.archlinux.org/packages/pacaur/][pacaur]], then
I install the [[https://aur.archlinux.org/packages/broadcom-wl-dkms/][broadcom-wl-dkms]] wireless driver and [[https://aur.archlinux.org/packages/mba6x_bl-dkms/][mba6x_bl-dkms]]
backlight driver to fix the post suspend/resume issue where three's no
brightness after waking up from suspend, and the only available
brightness would be 100%.
#+begin_src bash
pacaur -S linux-headers dkms # linux-headers is required for dkms
pacaur -S broadcom-wl-dkms
pacaur -S mba6x_bl-dkms
#+end_src
Then, I'd like to install
- input, graphics, and sound drivers,
- a desktop environment (I prefer Xfce or LXQt),
- a display manager for login screen (lightdm or sddm), and
- a network manager (NetworkManager or ConnMan).
Check out the [[https://wiki.archlinux.org/index.php/General_recommendations][General recommendations]] for more details.
*** References
Here are some resources I've come across each with lots of useful bits
and pieces, about installing Arch on a MacBook:
- [[https://github.com/pandeiro/arch-on-air][pandeiro/arch-on-air]]
- [[https://loicpefferkorn.net/2015/01/arch-linux-on-macbook-pro-retina-2014-with-dm-crypt-lvm-and-suspend-to-disk/][Arch Linux on MacBook Pro Retina 2014 with DM-Crypt, LVM and suspend to disk]]
- [[http://frankshin.com/installing-archlinux-on-macbook-air-2013/][Installing Archlinux on Macbook Air 2013]]
- [[http://panks.me/posts/2013/06/arch-linux-installation-with-os-x-on-macbook-air-dual-boot/][Arch Linux Installation with OS X on Macbook Air (Dual Boot)]]
- [[https://visual-assault.org/2016/03/05/install-encrypted-arch-linux-on-apple-macbook-pro/][Installing (encrypted) Arch Linux on an Apple MacBook Pro]]
- [[http://alexeyzabelin.com/arch-on-mac][Installing Arch Linux on a MacBook Air 2013]]
- [[https://medium.com/phils-thought-bubble-of-recent-stuff/arch-linux-running-on-my-macbook-2ea525ebefe3][Arch Linux running on my MacBook]]
- [[http://codylittlewood.com/arch-linux-on-macbook-pro-installation/][Dual boot Arch Linux on MacBook Pro Installation]]
* COMMENT Local Variables :ARCHIVE:
# Local Variables:
# org-hugo-footer: "\n\n[//]: # \"Exported with love from a post written in Org mode\"\n[//]: # \"- https://ox-hugo.scripter.co\""
# org-hugo-auto-export-on-save: t
# End: