git.shemshak.org - ~bandali/configs/blob - rc.org

   1 #+title: rc.org
   2 #+property: header-args :comments link :mkdirp yes :results silent
   3
   4 * About
   5
   6 This org file contains the configuration files of pretty much every
   7 program I use. The files are tangled (i.e. exported, or derived) from
   8 this file using =org-babel=.
   9
  10 Note: This file is best viewed inside Emacs with org mode.
  11
  12 * Configs
  13
  14 This section contains the configuration files (dotfiles) of various
  15 programs I use.
  16
  17 ** bspwm
  18
  19 *** bspwmrc
  20 :PROPERTIES:
  21 :header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
  22 :END:
  23
  24 #+begin_src sh :tangle no
  25 sxhkd &
  26 sh ~/.fehbg &
  27 xfce4-panel -d &
  28 compton &
  29 sleep 0.5 && pasystray --notify=all &
  30
  31 bspc monitor -d I II III IV V VI VII VIII IX X
  32 #bspc monitor eDP-1 -d I II III IV V
  33 #bspc monitor HDMI-1 -d VI VII VIII IX X
  34
  35 #bspc config border_width         2
  36 #bspc config window_gap           8
  37 bspc config window_gap           0
  38
  39 bspc config bottom_padding 26
  40
  41 bspc config split_ratio          0.52
  42 bspc config borderless_monocle   true
  43 bspc config gapless_monocle      true
  44 bspc config click_to_focus       button1
  45 bspc config directional_focus_tightness low
  46
  47 #bspc rule -a Firefox desktop='^1' follow=on
  48 bspc rule -a Nightly desktop='^1' follow=on
  49 bspc rule -a Emacs desktop='^2' state=tiled follow=on
  50 #bspc rule -a Chromium desktop='^4' follow=on
  51 bspc rule -a URxvt state=floating
  52 bspc rule -a URxvt:tiled state=tiled
  53 bspc rule -a Connman-gtk state=floating
  54 bspc rule -a Xfce4-panel state=floating
  55 bspc rule -a TelegramDesktop state=floating
  56 bspc rule -a Ec state=floating
  57 bspc rule -a Pavucontrol state=floating
  58 bspc rule -a Eog state=floating
  59 bspc rule -a Seahorse state=floating
  60 bspc rule -a mpv state=floating
  61 bspc rule -a Evince state=floating
  62 bspc rule -a Meld state=floating
  63 bspc rule -a Autokey-gtk state=floating
  64 bspc rule -a Mousepad state=floating
  65 bspc rule -a Wrapper-1.0 state=floating
  66 bspc rule -a File-roller state=floating
  67 bspc rule -a Gnome-disks state=floating
  68 bspc rule -a Termite state=floating
  69 bspc rule -a Termite:tiled state=tiled
  70 bspc rule -a Thunderbird:Calendar state=floating
  71 bspc rule -a Audacity state=floating
  72 bspc rule -a Proof state=floating # pvs x-show-proof
  73 bspc rule -a Nm-connection-editor state=floating
  74 bspc rule -a Wire state=floating
  75 bspc rule -a discord state=floating
  76 bspc rule -a X2goclient state=floating
  77 bspc rule -a SimpleScreenRecorder state=floating
  78 bspc rule -a Gimp state=floating
  79 bspc rule -a Wrapper-2.0 state=floating
  80 bspc rule -a Zathura state=tiled
  81 #+end_src
  82
  83 *** sxhkdrc
  84 :PROPERTIES:
  85 :header-args+: :tangle ~/.config/sxhkd/sxhkdrc
  86 :END:
  87
  88 #+begin_src conf :tangle no
  89 #
  90 # wm independent hotkeys
  91 #
  92
  93 # terminal emulator
  94 super + {_,shift} + Return
  95         urxvt{_, -name tiled}
  96
  97 #super + {_,shift} + Return
  98 #       termite{_, --name=tiled}
  99
 100 # program launcher
 101 super + space
 102         rofi -show run -display-run '> ' -display-window ' 🗔 '
 103
 104 super + alt + space
 105         xfce4-popup-whiskermenu
 106
 107 # window finder
 108 super + backslash
 109         rofi -show window  -display-run '> ' -display-window ' 🗔 '
 110
 111 # password manager
 112 alt + space
 113         rofi-pass
 114
 115 # firefox
 116 #super + r
 117 #       firefox
 118
 119 # chromium
 120 #super + c
 121 #       chromium -incognito
 122
 123 # emacs
 124 super + e
 125         emacs
 126
 127 # make sxhkd reload its configuration files:
 128 super + Escape
 129         pkill -USR1 -x sxhkd
 130
 131 # volume {up,down}
 132 XF86Audio{Raise,Lower}Volume
 133         pamixer --allow-boost --{in,de}crease 5
 134
 135 # mute
 136 XF86AudioMute
 137         pamixer --toggle-mute
 138
 139 XF86AudioMicMute
 140         pactl set-source-mute 1 toggle
 141
 142 # playback control
 143 XF86Audio{Play,Prev,Next}
 144         mpc {toggle,prev,next}
 145
 146 # lock the screen
 147 super + shift + q
 148         light-locker-command -l
 149
 150 # Toggle keyboard layout
 151 super + F7
 152         toggle-layout
 153
 154 # Toggle Xfce presentation mode
 155 XF86LaunchB
 156         toggle-presentation-mode
 157
 158 # monitor brightness
 159 XF86MonBrightness{Up,Down}
 160         light -{A,U} 5
 161
 162 super + apostrophe
 163         rofi-light
 164
 165 # keyboard brightness
 166 #XF86KbdBrightness{Up,Down}
 167 #       kbdlight {up,down}
 168
 169 XF86RotateWindows
 170         toggle-tablet
 171
 172 #
 173 # bspwm hotkeys
 174 #
 175
 176 # quit bspwm normally
 177 super + alt + Escape
 178         bspc quit
 179
 180 # close and kill
 181 super + {w,q}
 182         bspc node -{c,k}
 183
 184 # alternate between the tiled and monocle layout
 185 super + m
 186         bspc desktop -l next
 187
 188 # send the newest marked node to the newest preselected node
 189 super + y
 190         bspc node newest.marked.local -n newest.!automatic.local
 191
 192 # swap the current node and the biggest node
 193 super + g
 194         bspc node -s biggest
 195
 196 #
 197 # state/flags
 198 #
 199
 200 # set the window state
 201 super + {t,shift + t,s,f}
 202         bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
 203
 204 # set the node flags
 205 super + ctrl + {m,x,y,z}
 206         bspc node -g {marked,locked,sticky,private}
 207
 208 #
 209 # focus/swap
 210 #
 211
 212 # focus the node in the given direction
 213 super + {_,shift + }{h,j,k,l}
 214         bspc node -{f,s} {west,south,north,east}
 215
 216 # focus the node for the given path jump
 217 super + {p,b,comma,period}
 218         bspc node -f @{parent,brother,first,second}
 219
 220 # focus the next/previous node in the current desktop
 221 super + {_,shift + }c
 222         bspc node -f {next,prev}.local
 223
 224 # focus the next/previous desktop in the current monitor
 225 super + bracket{left,right}
 226         bspc desktop -f {prev,next}.local
 227
 228 # send to next/prev desktop
 229 super + shift + bracket{left,right}
 230         bspc node -d {prev,next} --follow
 231
 232 # focus the last node/desktop
 233 super + {grave,Tab}
 234         bspc {node,desktop} -f last
 235
 236 # focus the older or newer node in the focus history
 237 super + {o,i}
 238         bspc wm -h off; \
 239         bspc node {older,newer} -f; \
 240         bspc wm -h on
 241
 242 # focus or send to the given desktop
 243 super + {_,shift + }{1-9,0}
 244         bspc {desktop -f,node -d} '^{1-9,10}'
 245
 246 #
 247 # preselect
 248 #
 249
 250 # preselect the direction
 251 super + ctrl + {h,j,k,l}
 252         bspc node -p {west,south,north,east}
 253
 254 # preselect the ratio
 255 super + ctrl + {1-9}
 256         bspc node -o 0.{1-9}
 257
 258 # cancel the preselection for the focused node
 259 super + ctrl + space
 260         bspc node -p cancel
 261
 262 # cancel the preselection for the focused desktop
 263 super + ctrl + shift + space
 264         bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
 265
 266 #
 267 # move/resize
 268 #
 269
 270 # expand a window by moving one of its side outward
 271 super + alt + {h,j,k,l}
 272         bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
 273
 274 # contract a window by moving one of its side inward
 275 super + alt + shift + {h,j,k,l}
 276         bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
 277
 278 # move a floating window
 279 super + {Left,Down,Up,Right}
 280         bspc node -v {-20 0,0 20,0 -20,20 0}
 281
 282 #alt + bracket{left,right}
 283 #       xdotool key --clearmodifiers ctrl+Page_{Up,Down}
 284 #+end_src
 285
 286 ** compton
 287 :PROPERTIES:
 288 :header-args+: :tangle ~/.config/compton.conf
 289 :END:
 290
 291 #+begin_src conf :tangle no
 292 # Shadow
 293 shadow = false;                 # Enabled client-side shadows on windows.
 294 no-dock-shadow = true;          # Avoid drawing shadows on dock/panel windows.
 295 no-dnd-shadow = true;           # Don't draw shadows on DND windows.
 296 clear-shadow = true;            # Zero the part of the shadow's mask behind the
 297                                 # window. Fix some weirdness with ARGB windows.
 298 shadow-radius = 5;              # The blur radius for shadows. (default 12)
 299 shadow-offset-x = -5;           # The left offset for shadows. (default -15)
 300 shadow-offset-y = -5;           # The top offset for shadows. (default -15)
 301 # shadow-opacity = 0.7;         # The translucency for shadows. (default .75)
 302 # shadow-red = 0.0;             # Red color value of shadow. (0.0 - 1.0, defaults to 0)
 303 # shadow-green = 0.0;           # Green color value of shadow. (0.0 - 1.0, defaults to 0)
 304 # shadow-blue = 0.0;            # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
 305 shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ];    # Exclude conditions for shadows.
 306 # shadow-exclude = "n:e:Notification";
 307 #shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
 308 shadow-ignore-shaped = true;    # Avoid drawing shadow on all shaped windows
 309                                 # (see also: --detect-rounded-corners)
 310
 311 # Opacity
 312 menu-opacity = 1.0;                     # The opacity for menus. (default 1.0)
 313 #inactive-opacity = 0.9;                        # Default opacity of inactive windows. (0.0 - 1.0)
 314 # active-opacity = 0.8;                 # Default opacity for active windows. (0.0 - 1.0)
 315 frame-opacity = 1.0;                    # Opacity of window titlebars and borders. (0.1 - 1.0)
 316 # inactive-opacity-override = true;     # Let inactive opacity set by 'inactive-opacity' overrides
 317                                         # value of _NET_WM_OPACITY. Bad choice.
 318 alpha-step = 0.06;                      # XRender backend: Step size for alpha pictures. Increasing
 319                                         # it may result in less X resource usage,
 320                                         # Yet fading may look bad.
 321 #inactive-dim = 0.5;                    # Dim inactive windows. (0.0 - 1.0)
 322 #inactive-dim-fixed = true;             # Do not let dimness adjust based on window opacity.
 323 # blur-background = true;               # Blur background of transparent windows.
 324                                         # Bad performance with X Render backend.
 325                                         # GLX backend is preferred.
 326 # blur-background-frame = true;         # Blur background of opaque windows with transparent
 327                                         # frames as well.
 328 blur-background-fixed = true;           # Do not let blur radius adjust based on window opacity.
 329 blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
 330                                         # Exclude conditions for background blur.
 331
 332 # Fading
 333 fading = false;                 # Fade windows during opacity changes.
 334 fade-delta = 3;         # The time between steps in a fade in milliseconds. (default 10).
 335 fade-in-step = 0.03;            # Opacity change between steps while fading in. (default 0.028).
 336 fade-out-step = 0.03;           # Opacity change between steps while fading out. (default 0.03).
 337 # no-fading-openclose = true;   # Avoid fade windows in/out when opening/closing.
 338 fade-exclude = [ ];             # Exclude conditions for fading.
 339
 340 # Other
 341 backend = "glx"                 # Backend to use: "xrender" or "glx". GLX backend is typically
 342                                 # much faster but depends on a sane driver.
 343 mark-wmwin-focused = true;      # Try to detect WM windows and mark them as active.
 344 mark-ovredir-focused = true;    # Mark all non-WM but override-redirect windows active (e.g. menus).
 345 use-ewmh-active-win = true;     # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
 346                                 # instead of using FocusIn/Out events. Usually more reliable but
 347                                 # depends on a EWMH-compliant WM.
 348 detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
 349 detect-client-opacity = true;   # Detect _NET_WM_OPACITY on client windows, useful for window
 350                                 # managers not passing _NET_WM_OPACITY of client windows to frame
 351                                 # windows.
 352 refresh-rate = 0;               # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
 353 vsync = "drm";                  # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
 354                                 # See man page for more details.
 355 dbe = false;                    # Enable DBE painting mode. Rarely needed.
 356 paint-on-overlay = true;        # Painting on X Composite overlay window. Recommended.
 357 sw-opti = false;                # Limit compton to repaint at most once every 1 / refresh_rate.
 358                                 # Incompatible with certain VSync methods.
 359 unredir-if-possible = false;    # Unredirect all windows if a full-screen opaque window is
 360                                 # detected, to maximize performance for full-screen windows.
 361 focus-exclude = [ ];            # A list of conditions of windows that should always be considered
 362                                 # focused.
 363 detect-transient = true;        # Use WM_TRANSIENT_FOR to group windows, and consider windows in
 364                                 # the same group focused at the same time.
 365 detect-client-leader = true;    # Use WM_CLIENT_LEADER to group windows.
 366 invert-color-include = [ ];     # Conditions for windows to be painted with inverted color.
 367
 368 # GLX backend                   # GLX backend fine-tune options. See man page for more info.
 369 glx-no-stencil = true;          # Recommended.
 370 glx-copy-from-front = false;    # Useful with --glx-swap-method,
 371 # glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
 372 # glx-no-rebind-pixmap = true;  # Recommended if it works.
 373 glx-no-rebind-pixmap = true;    # Recommended if it works.
 374 #glx-swap-method = "4"; # See man page.
 375 glx-swap-method = "4";  # See man page.
 376
 377 # Window type settings
 378 wintypes:
 379 {
 380   tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
 381   menu = { shadow = false; };
 382   dropdown_menu = { shadow = false; };
 383   popup_menu =  { shadow = false; };
 384   utility =  { shadow = false; };
 385   # fade: Fade the particular type of windows.
 386   # shadow: Give those windows shadow
 387   # opacity: Default opacity for the type of windows.
 388   # focus: Whether to always consider windows of this type focused.
 389 };
 390 #+end_src
 391
 392 ** Dunst
 393 :PROPERTIES:
 394 :header-args+: :tangle ~/.config/dunst/dunstrc
 395 :END:
 396
 397 #+begin_src conf
 398 [global]
 399 #font = Ubuntu Mono 10.5
 400 font = Inconsolata 11
 401
 402 # Path to default icons.
 403 icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
 404
 405 icon_position = left
 406 # <b>bold</b>
 407 # <i>italic</i>
 408 # <s>strikethrough<s/>
 409 # <u>underline</u>
 410 markup = full
 411 # The format of the message. Possible variables are:
 412 #   %a  appname
 413 #   %s  summary
 414 #   %b  body
 415 #   %i  iconname (including its path)
 416 #   %I  iconname (without its path)
 417 #   %p  progress value if set ([  0%] to [100%]) or nothing
 418 # Markup is allowed
 419 format = "<b>%s</b>\n%b"
 420 # Sort messages by urgency
 421 sort = yes
 422 # Show how many messages are currently hidden (because of geometry)
 423 indicate_hiddenl= no
 424 # Alignment of message text.
 425 # Possible values are "left", "center" and "right"
 426 alignment = center
 427 # The frequency with wich text that is longer than the notification
 428 # window allows bounces back and forth.
 429 # This option conflicts with 'word_wrap'.
 430 # Set to 0 to disable
 431 bounce_freq = 3
 432 # show age of message if message is older than show_age_threshold seconds.
 433 # set to -1 to disable
 434 show_age_threshold = -1
 435 # split notifications into multiple lines if they don't fit into geometry
 436 word_wrap = yes
 437 # ignore newlines '\n' in notifications
 438 ignore_newline = no
 439 # The geometry of the message window.
 440 # geometry [{width}]x{height}][+/-{x}+/-{y}]
 441 # The height is measured in number of notifications everything else in pixels. If the width
 442 # is omitted but the height is given ("-geometry x2"), the message window
 443 # expands over the whole screen (dmenu-like). If width is 0,
 444 # the window expands to the longest message displayed.
 445 # A positive x is measured from the left, a negative from the
 446 # right side of the screen.  Y is measured from the top and down respectevly.
 447 # The width can be negative. In this case the actual width is the
 448 # screen width minus the width defined in within the geometry option.
 449 #geometry = "410x12-12+12"
 450 #geometry = "0x0-30-30"
 451 geometry = "260x12-30-30"
 452 # The transparency of the window. range: [0; 100]
 453 # This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
 454 transparency = 0
 455 # Don't remove messages, if the user is idle (no mouse or keyboard input)
 456 # for longer than idle_threshold seconds.
 457 # Set to 0 to disable.
 458 idle_threshold = 120
 459 # Which monitor should the notifications be displayed on.
 460 monitor = 0
 461 # Display notification on focused monitor. Possible modes are:
 462 # mouse: follow mouse pointer
 463 # keyboard: follow window with keyboard focus
 464 # none: don't follow anything
 465 #
 466 # "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
 467 # This should be the case for almost all modern windowmanagers.
 468 #
 469 # If this option is set to mouse or keyboard, the monitor option will be
 470 # ignored.
 471 follow = keyboard
 472 # should a notification popped up from history be sticky or
 473 # timeout as if it would normally do.
 474 sticky_history = yes
 475 # The height of a single line. If the height is smaller than the font height,
 476 # it will get raised to the font height.
 477 # This adds empty space above and under the text.
 478 line_height = 0
 479
 480 show_indicators = yes
 481
 482 # Draw a line of 'separatpr_height' pixel height between two notifications.
 483 # Set to 0 to disable
 484 separator_height = 3
 485 # padding between text and separator
 486 padding = 8
 487 # horizontal padding
 488 horizontal_padding = 8
 489 # Define a color for the separator.
 490 # possible values are:
 491 #  * auto: dunst tries to find a color fitting to the background
 492 #  * foreground: use the same color as the foreground
 493 #  * frame: use the same color as the frame.
 494 #  * anything else will be interpreted as a X color
 495 separator_color = foreground
 496 # print a notification on startup
 497 # This is mainly for error detection, since dbus (re-)starts dunst
 498 # automatically after a crash.
 499 startup_notification = false
 500 # dmenu path
 501 #dmenu = /usr/bin/dmenu -p dunst:
 502 dmenu = /usr/bin/rofi -dmenu -p dunst:
 503 # browser for opening urls in context menu
 504 browser = /usr/bin/firefox -new-tab
 505 [frame]
 506 width = 0
 507 color = "#377222"
 508 [shortcuts]
 509 # shortcuts are specified as [modifier+][modifier+]...key
 510 # available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
 511 # and 'mod4' (windows-key)
 512 # xev might be helpful to find names for keys
 513 # close notification
 514 close = ctrl+space
 515 # close all notifications
 516 close_all = ctrl+shift+space
 517 # redisplay last message(s)
 518 # On the US keyboard layout 'grave' is normally above TAB and left of '1'.
 519 history = ctrl+shift+h
 520 # context menu
 521 context = ctrl+shift+period
 522 [urgency_low]
 523 # IMPORTANT: colors have to be defined in quotation marks.
 524 # Otherwise the '#' and following  would be interpreted as a comment.
 525 background = "#1d2a30"
 526 foreground = "#71c2af"
 527 timeout = 3
 528 [urgency_normal]
 529 background = "#1d2a30"
 530 foreground = "#71c2af"
 531 timeout = 0
 532 [urgency_critical]
 533 background = "#1d2a30"
 534 foreground = "#ff9982"
 535 timeout = 0
 536
 537 # Every section that isn't one of the above is interpreted as a rules
 538 # to override settings for certain messages.
 539 # Messages can be matched by 'appname', 'summary', 'body' or 'icon'
 540 # and you can override the 'timeout', 'urgency', 'foreground', 'background'
 541 # and 'format'.
 542 # Shell-like globbing will get expanded.
 543 #
 544 # SCRIPTING
 545 # you can specify a script that gets run when the rule matches by setting
 546 # the 'script' option.
 547 # The script will be called as follows:
 548 # script appname summary body icon urgency
 549 # where urgency can be "LOW", "NORMAL" or "CRITICAL".
 550 #
 551 # NOTE: if you don't want a notification to be displayed, set the format to ""
 552 # NOTE: It might be helpful to run dunst -print in a terminal in order to find
 553 # fitting options for rules.
 554 #[espeak]
 555 #    summary = "*"
 556 #    script = dunst_espeak.sh
 557 #[script-test]
 558 #    summary = "*script*"
 559 #    script = dunst_test.sh
 560 #[ignore]
 561 ## This notification will not be displayed
 562 #    summary = "foobar"
 563 #    format = ""
 564 #[signed_on]
 565 #    appname = Pidgin
 566 #    summary = "*signed on*"
 567 #    urgency = low
 568 #
 569 #[signed_off]
 570 #    appname = Pidgin
 571 #    summary = *signed off*
 572 #    urgency = low
 573 #
 574 #[says]
 575 #    appname = Pidgin
 576 #    summary = *says*
 577 #    urgency = critical
 578 #
 579 #[twitter]
 580 #    appname = Pidgin
 581 #    summary = *twitter.com*
 582 #    urgency = normal
 583 #
 584 [xfpm-backlight]
 585     summary = *Brightness*
 586     urgency = low
 587 #+end_src
 588
 589 ** Fontconfig
 590 :PROPERTIES:
 591 :header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
 592 :END:
 593
 594 #+begin_src xml
 595 <?xml version="1.0"?>
 596 <!DOCTYPE fontconfig SYSTEM "fonts.dtd">
 597 <fontconfig>
 598  <match target="font">
 599   <edit mode="assign" name="rgba">
 600    <const>rgb</const>
 601   </edit>
 602  </match>
 603  <match target="font">
 604   <edit mode="assign" name="hinting">
 605    <bool>true</bool>
 606   </edit>
 607  </match>
 608  <match target="font">
 609   <edit mode="assign" name="hintstyle">
 610    <const>hintslight</const>
 611   </edit>
 612  </match>
 613  <match target="font">
 614   <edit mode="assign" name="antialias">
 615    <bool>true</bool>
 616   </edit>
 617  </match>
 618  <match target="font">
 619   <edit mode="assign" name="lcdfilter">
 620    <const>lcddefault</const>
 621   </edit>
 622  </match>
 623  <dir>~/.fonts</dir>
 624
 625  <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
 626  <alias binding="same">
 627   <family>Helvetica</family>
 628   <prefer>
 629    <family>Liberation Sans</family>
 630   </prefer>
 631 </alias>
 632 </fontconfig>
 633 #+end_src
 634
 635 ** getmail
 636
 637 *** getmailrc
 638 :PROPERTIES:
 639 :header-args+: :tangle ~/.getmail/getmailrc
 640 :END:
 641
 642 #+begin_src conf
 643 [retriever]
 644 type = SimplePOP3SSLRetriever
 645 server = fencepost.gnu.org
 646 username = aminb
 647 password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
 648 port = 995
 649 use_apop = True
 650
 651 [destination]
 652 type = Maildir
 653 path = ~/mail/gnu/Inbox/
 654
 655 [options]
 656 delete = True
 657 #+end_src
 658
 659 *** getmail.service
 660 :PROPERTIES:
 661 :header-args+: :tangle ~/.config/systemd/user/getmail.service
 662 :END:
 663
 664 #+begin_src conf :tangle no
 665 [Unit]
 666 Description=getmail service
 667
 668 [Service]
 669 Type=oneshot
 670 ExecStart=/usr/bin/getmail
 671 StandardOutput=syslog
 672 StandardError=syslog
 673 #+end_src
 674
 675 *** getmail.timer
 676 :PROPERTIES:
 677 :header-args+: :tangle ~/.config/systemd/user/getmail.timer
 678 :END:
 679
 680 #+begin_src conf :tangle no
 681 [Unit]
 682 Description=getmail timer
 683
 684 [Timer]
 685 OnCalendar=*:0/30
 686 Persistent=true
 687 Unit=getmail.service
 688
 689 [Install]
 690 WantedBy=timers.target
 691 #+end_src
 692
 693 ** Git
 694
 695 *** gitconfig
 696 :PROPERTIES:
 697 :header-args+: :tangle ~/.gitconfig
 698 :END:
 699
 700 **** user
 701 #+begin_src conf
 702 [user]
 703     name = Amin Bandali
 704     email = amin@gnu.org
 705     signingkey = CDDE75F903538E71813CDA27D1FBA36627D65876
 706 #+end_src
 707
 708 **** signing
 709 #+begin_src conf
 710 [commit]
 711     gpgsign = true
 712 # [format]
 713 #     signoff = true
 714 #+end_src
 715
 716 **** core
 717 #+begin_src conf
 718 [core]
 719     autocrlf = input  # CRLF -> LF on commit
 720     editor = emacsclient -t
 721     excludesfile = ~/.gitignore_global
 722     pager = "less"
 723 #+end_src
 724
 725 **** gpg
 726 #+begin_src conf
 727 [gpg]
 728     program = gpg2
 729 #+end_src
 730
 731 **** alias
 732 #+begin_src conf
 733 [alias]
 734     git = !exec git  # handle nested git calls, e.g. git git status
 735     aliases = config --get-regexp '^alias\\.'
 736     a = add
 737     s = status
 738     sl = status --long
 739     c = checkout
 740     cb = checkout -b
 741     b = branch
 742     r = rebase
 743     p = pull
 744     pr = pull --rebase
 745     ps = push
 746     psf = push --force
 747     nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f"
 748     nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f"
 749 #+end_src
 750
 751 **** color
 752 #+begin_src conf
 753 [color]
 754     ui = auto
 755 [color "status"]
 756     added = green bold
 757     changed = red bold
 758     untracked = red bold
 759 [color "branch"]
 760     current = green bold
 761     remote = magenta bold
 762 [color "diff"]
 763     new = green bold
 764     old = red bold
 765 #+end_src
 766
 767 **** status
 768 #+begin_src conf
 769 [status]
 770     # showUntrackedFiles = all
 771     short=true
 772     branch=true
 773 #+end_src
 774
 775 **** github
 776 #+begin_src conf
 777 [github]
 778         user = aminb
 779 #+end_src
 780
 781 **** send-email
 782 #+begin_src conf
 783 [sendemail]
 784         smtpuser = aminb
 785         smtpserver = fencepost.gnu.org
 786         smtpserverport = 587
 787         smtpencryption = tls
 788         annotate = yes
 789 #+end_src
 790
 791 *** gitignore
 792 :PROPERTIES:
 793 :header-args+: :tangle ~/.gitignore_global
 794 :END:
 795
 796 #+begin_src conf
 797 *.orig
 798 *.py[co]
 799 *.sublime-workspace
 800 *~
 801 .DS_Store
 802 *.elc
 803 *-autoloads.el
 804 #+end_src
 805
 806 ** GnuPG
 807 :PROPERTIES:
 808 :header-args+: :tangle ~/.gnupg/gpg-agent.conf
 809 :END:
 810
 811 #+begin_src conf
 812 default-cache-ttl 43200
 813 max-cache-ttl 43200
 814
 815 default-cache-ttl-ssh 10800
 816 max-cache-ttl-ssh 10800
 817
 818 # pinentry-program /usr/bin/pinentry-qt
 819 #+end_src
 820
 821 ** GTK
 822
 823 *** gtk-2.0
 824 :PROPERTIES:
 825 :header-args+: :tangle ~/.gtkrc-2.0
 826 :END:
 827
 828 #+begin_src conf
 829 gtk-theme-name="Greybird"
 830 gtk-icon-theme-name="Paper"
 831 gtk-font-name="Ubuntu 10"
 832 gtk-menu-images=0
 833 # gtk-key-theme-name = "Emacs"
 834 #+end_src
 835
 836 *** gtk-3.0
 837 :PROPERTIES:
 838 :header-args+: :tangle ~/.config/gtk-3.0/settings.ini
 839 :END:
 840
 841 #+begin_src conf :tangle no
 842 [Settings]
 843 gtk-icon-theme-name = Paper
 844 # gtk-theme-name = Adwaita
 845
 846 gtk-theme-name = Greybird
 847 # gtk-theme-name = Arc-Darker
 848 # gtk-theme-name = Numix-ArchBlue
 849
 850 gtk-font-name = Ubuntu 10
 851 # gtk-key-theme-name = Emacs
 852 #+end_src
 853
 854 ** [[https://github.com/Leinnan/i3gs][i3gs]]
 855 :PROPERTIES:
 856 :header-args+: :tangle ~/.config/i3gs/config
 857 :END:
 858
 859 #+begin_src conf :comments none :tangle no
 860 borders_width=0 0 2 0
 861 separator_width=10
 862
 863 #[mpd]
 864 #preset=MPD
 865 #title=<span weight='heavy' fgcolor='#7FDBFF'> </span>
 866 #borders_color=#7FDBFF
 867
 868 [ram]
 869 preset=RAM
 870 title=<span weight='heavy' fgcolor='#3D9970'> </span>
 871 borders_color=#3D9970
 872
 873 #[cpu]
 874 #preset=CPU
 875 #title=<span weight='heavy' fgcolor='#2ECC40'> </span>
 876 #borders_color=#2ECC40
 877
 878 #[hdd]
 879 #preset=HDD
 880 #title=<span weight='heavy' fgcolor='#01FF70'> </span>
 881 #borders_color=#01FF70
 882
 883 [volume]
 884 command=volume-info
 885 title=<span weight='heavy' fgcolor='#7FDBFF'></span>
 886 borders_color=#7FDBFF
 887
 888 [battery]
 889 preset=BAT
 890 command=battery-percentage-time
 891 title=<span weight='heavy' fgcolor='#39CCCC'> </span>
 892 borders_color=#39CCCC
 893
 894 [wifi]
 895 preset=WIFI
 896 title=<span weight='heavy' fgcolor='#01FF70'> </span>
 897 borders_color=#01FF70
 898
 899 [date]
 900 preset=DATE
 901 command=date '+%-I:%M, %a %b %d '
 902 title=<span weight='heavy' fgcolor='#FFDC00'> </span>
 903 borders_color=#FFDC00
 904 separator_width=0
 905 #+end_src
 906
 907 ** i3status
 908 :PROPERTIES:
 909 :header-args+: :tangle ~/.config/i3status/config
 910 :END:
 911
 912 #+begin_src conf :comments none
 913 # i3status configuration file.
 914 # see "man i3status" for documentation.
 915
 916 # It is important that this file is edited as UTF-8.
 917 # The following line should contain a sharp s:
 918 # ß
 919 # If the above line is not correctly displayed, fix your editor first!
 920
 921 general {
 922         colors = true
 923         interval = 5
 924 }
 925
 926 # order += "ipv6"
 927 order += "disk /"
 928 order += "disk /data"
 929 order += "wireless _first_"
 930 # order += "ethernet _first_"
 931 order += "battery 0"
 932 order += "volume master"
 933 order += "load"
 934 order += "tztime local"
 935
 936 wireless _first_ {
 937         format_up = "W:%quality %essid %ip"
 938         format_down = "W: down"
 939 }
 940
 941 # ethernet _first_ {
 942 #         # if you use %speed, i3status requires root privileges
 943 #         format_up = "E: %ip (%speed)"
 944 #         format_down = "E: down"
 945 # }
 946
 947 battery 0 {
 948         format = "%status %percentage %remaining (%consumption)"
 949         path = "/sys/class/power_supply/BAT%d/uevent"
 950         low_threshold = "10"
 951         threshold_type = "percentage"
 952         last_full_capacity = true
 953         integer_battery_capacity = true
 954         hide_seconds = true
 955 }
 956
 957 tztime local {
 958         format = "%-I:%M%P %a %b %d"
 959 }
 960
 961 volume master {
 962         format = "♪ %volume"
 963         format_muted = "🔇 %volume"
 964         device = "pulse"
 965 }
 966
 967 load {
 968         format = "%1min"
 969 }
 970
 971 disk "/" {
 972         format = "/ %avail"
 973 }
 974
 975 disk "/data" {
 976         format = "/data %avail"
 977 }
 978 #+end_src
 979
 980 ** isync
 981
 982 *** mbsyncrc
 983 :PROPERTIES:
 984 :header-args+: :tangle ~/.mbsyncrc
 985 :END:
 986
 987 #+begin_src conf
 988 # Global defaults
 989 CopyArrivalDate yes
 990
 991 ######
 992 IMAPAccount amin
 993 Host nix.aminb.org
 994 User amin@aminb.org
 995 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
 996 SSLType IMAPS
 997
 998 IMAPStore amin-remote
 999 Account amin
1000
1001 MaildirStore amin-local
1002 Path ~/mail/amin/
1003 Inbox ~/mail/amin/Inbox
1004 SubFolders Verbatim
1005
1006 Channel amin
1007 Master :amin-remote:
1008 Slave :amin-local:
1009 Patterns * !dovecot*
1010 Create Both
1011 SyncState *
1012
1013 ######
1014 IMAPAccount uwaterloo
1015 Host connect.uwaterloo.ca
1016 User abandali
1017 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
1018 SSLType IMAPS
1019
1020 IMAPStore uwaterloo-remote
1021 Account uwaterloo
1022
1023 MaildirStore uwaterloo-local
1024 Path ~/mail/uwaterloo/
1025 Inbox ~/mail/uwaterloo/Inbox
1026 SubFolders Verbatim
1027
1028 Channel uwaterloo
1029 Master :uwaterloo-remote:
1030 Slave :uwaterloo-local:
1031 Patterns * !dovecot*
1032 Create Both
1033 SyncState *
1034 #+end_src
1035
1036 *** mbsync.service
1037 :PROPERTIES:
1038 :header-args+: :tangle ~/.config/systemd/user/mbsync.service
1039 :END:
1040
1041 #+begin_src conf :tangle no
1042 [Unit]
1043 Description=mbsync service
1044
1045 [Service]
1046 Type=oneshot
1047 ExecStart=/usr/bin/mbsync -Va
1048 StandardOutput=syslog
1049 StandardError=syslog
1050 #+end_src
1051
1052 *** mbsync.timer
1053 :PROPERTIES:
1054 :header-args+: :tangle ~/.config/systemd/user/mbsync.timer
1055 :END:
1056
1057 #+begin_src conf :tangle no
1058 [Unit]
1059 Description=mbsync timer
1060
1061 [Timer]
1062 OnCalendar=*:0/15
1063 Persistent=true
1064 Unit=mbsync.service
1065
1066 [Install]
1067 WantedBy=timers.target
1068 #+end_src
1069
1070 ** Latexmk
1071 :PROPERTIES:
1072 :header-args+: :tangle ~/.latexmkrc
1073 :END:
1074
1075 #+begin_src conf
1076 $pdf_previewer = "start zathura %O %S";
1077 $clean_ext = "aux out";
1078
1079 # $pdf_update_method = 4;
1080 # $pdf_update_command = "zathura %O %S";
1081
1082 # Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
1083 # by Ctrl+click in the PDF.
1084 # Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
1085 # editor.
1086 # $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
1087 #+end_src
1088
1089 ** libinput
1090
1091 Improve XPS 15 9560's touchpad experience.
1092
1093 # begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
1094 #+begin_src conf :tangle no
1095 Section "InputClass"
1096     Identifier "libinput touchpad catchall"
1097     Driver "libinput"
1098     MatchIsTouchpad "on"
1099     Option "ClickMethod" "clickfinger"
1100     Option "NaturalScrolling" "true"
1101     Option "Tapping" "on"
1102     Option "TappingButtonMap" "lrm"
1103 EndSection
1104 #+end_src
1105
1106 ** mpd
1107 :PROPERTIES:
1108 :header-args+: :tangle ~/.config/mpd/mpd.conf
1109 :END:
1110
1111 #+begin_src conf
1112 # An example configuration file for MPD.
1113 # Read the user manual for documentation: http://www.musicpd.org/doc/user/
1114
1115
1116 # Files and directories #######################################################
1117 #
1118 # This setting controls the top directory which MPD will search to discover the
1119 # available audio files and add them to the daemon's online database. This
1120 # setting defaults to the XDG directory, otherwise the music directory will be
1121 # be disabled and audio files will only be accepted over ipc socket (using
1122 # file:// protocol) or streaming files over an accepted protocol.
1123 #
1124 music_directory         "~/usr/music"
1125 #
1126 # This setting sets the MPD internal playlist directory. The purpose of this
1127 # directory is storage for playlists created by MPD. The server will use
1128 # playlist files not created by the server but only if they are in the MPD
1129 # format. This setting defaults to playlist saving being disabled.
1130 #
1131 playlist_directory              "~/.mpd/playlists"
1132 #
1133 # This setting sets the location of the MPD database. This file is used to
1134 # load the database at server start up and store the database while the
1135 # server is not up. This setting defaults to disabled which will allow
1136 # MPD to accept files over ipc socket (using file:// protocol) or streaming
1137 # files over an accepted protocol.
1138 #
1139 db_file                 "~/.mpd/database"
1140 #
1141 # These settings are the locations for the daemon log files for the daemon.
1142 # These logs are great for troubleshooting, depending on your log_level
1143 # settings.
1144 #
1145 # The special value "syslog" makes MPD use the local syslog daemon. This
1146 # setting defaults to logging to syslog, otherwise logging is disabled.
1147 #
1148 log_file                        "~/.mpd/log"
1149 #
1150 # This setting sets the location of the file which stores the process ID
1151 # for use of mpd --kill and some init scripts. This setting is disabled by
1152 # default and the pid file will not be stored.
1153 #
1154 pid_file                        "~/.mpd/pid"
1155 #
1156 # This setting sets the location of the file which contains information about
1157 # most variables to get MPD back into the same general shape it was in before
1158 # it was brought down. This setting is disabled by default and the server
1159 # state will be reset on server start up.
1160 #
1161 state_file                      "~/.mpd/state"
1162 #
1163 # The location of the sticker database.  This is a database which
1164 # manages dynamic information attached to songs.
1165 #
1166 sticker_file                    "~/.mpd/sticker.sql"
1167 #
1168 ###############################################################################
1169
1170
1171 # General music daemon options ################################################
1172 #
1173 # This setting specifies the user that MPD will run as. MPD should never run as
1174 # root and you may use this setting to make MPD change its user ID after
1175 # initialization. This setting is disabled by default and MPD is run as the
1176 # current user.
1177 #
1178 #user                           "nobody"
1179 #
1180 # This setting specifies the group that MPD will run as. If not specified
1181 # primary group of user specified with "user" setting will be used (if set).
1182 # This is useful if MPD needs to be a member of group such as "audio" to
1183 # have permission to use sound card.
1184 #
1185 #group                          "nogroup"
1186 #
1187 # This setting sets the address for the daemon to listen on. Careful attention
1188 # should be paid if this is assigned to anything other then the default, any.
1189 # This setting can deny access to control of the daemon. Not effective if
1190 # systemd socket activiation is in use.
1191 #
1192 # For network
1193 #bind_to_address                "any"
1194 #
1195 # And for Unix Socket
1196 #bind_to_address                "~/.mpd/socket"
1197 #
1198 # This setting is the TCP port that is desired for the daemon to get assigned
1199 # to.
1200 #
1201 #port                           "6600"
1202 #
1203 # This setting controls the type of information which is logged. Available
1204 # setting arguments are "default", "secure" or "verbose". The "verbose" setting
1205 # argument is recommended for troubleshooting, though can quickly stretch
1206 # available resources on limited hardware storage.
1207 #
1208 #log_level                      "default"
1209 #
1210 # If you have a problem with your MP3s ending abruptly it is recommended that
1211 # you set this argument to "no" to attempt to fix the problem. If this solves
1212 # the problem, it is highly recommended to fix the MP3 files with vbrfix
1213 # (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
1214 # point gapless MP3 playback can be enabled.
1215 #
1216 #gapless_mp3_playback                   "yes"
1217 #
1218 # Setting "restore_paused" to "yes" puts MPD into pause mode instead
1219 # of starting playback after startup.
1220 #
1221 #restore_paused "no"
1222 #
1223 # This setting enables MPD to create playlists in a format usable by other
1224 # music players.
1225 #
1226 #save_absolute_paths_in_playlists       "no"
1227 #
1228 # This setting defines a list of tag types that will be extracted during the
1229 # audio file discovery process. The complete list of possible values can be
1230 # found in the user manual.
1231 #metadata_to_use        "artist,album,title,track,name,genre,date,composer,performer,disc"
1232 #
1233 # This setting enables automatic update of MPD's database when files in
1234 # music_directory are changed.
1235 #
1236 #auto_update    "yes"
1237 #
1238 # Limit the depth of the directories being watched, 0 means only watch
1239 # the music directory itself.  There is no limit by default.
1240 #
1241 #auto_update_depth "3"
1242 #
1243 ###############################################################################
1244
1245
1246 # Symbolic link behavior ######################################################
1247 #
1248 # If this setting is set to "yes", MPD will discover audio files by following
1249 # symbolic links outside of the configured music_directory.
1250 #
1251 #follow_outside_symlinks        "yes"
1252 #
1253 # If this setting is set to "yes", MPD will discover audio files by following
1254 # symbolic links inside of the configured music_directory.
1255 #
1256 #follow_inside_symlinks         "yes"
1257 #
1258 ###############################################################################
1259
1260
1261 # Zeroconf / Avahi Service Discovery ##########################################
1262 #
1263 # If this setting is set to "yes", service information will be published with
1264 # Zeroconf / Avahi.
1265 #
1266 #zeroconf_enabled               "yes"
1267 #
1268 # The argument to this setting will be the Zeroconf / Avahi unique name for
1269 # this MPD server on the network.
1270 #
1271 #zeroconf_name                  "Music Player"
1272 #
1273 ###############################################################################
1274
1275
1276 # Permissions #################################################################
1277 #
1278 # If this setting is set, MPD will require password authorization. The password
1279 # setting can be specified multiple times for different password profiles.
1280 #
1281 #password                        "password@read,add,control,admin"
1282 #
1283 # This setting specifies the permissions a user has who has not yet logged in.
1284 #
1285 #default_permissions             "read,add,control,admin"
1286 #
1287 ###############################################################################
1288
1289
1290 # Database #######################################################################
1291 #
1292
1293 #database {
1294 #       plugin "proxy"
1295 #       host "other.mpd.host"
1296 #       port "6600"
1297 #}
1298
1299 # Input #######################################################################
1300 #
1301
1302 input {
1303         plugin "curl"
1304 #       proxy "proxy.isp.com:8080"
1305 #       proxy_user "user"
1306 #       proxy_password "password"
1307 }
1308
1309 #
1310 ###############################################################################
1311
1312 # Audio Output ################################################################
1313 #
1314
1315 audio_output {
1316     type    "pulse"
1317     name    "pulse audio"
1318 }
1319
1320 audio_output {
1321     type    "fifo"
1322     name    "my_fifo"
1323     path    "/tmp/mpd.fifo"
1324     format  "44100:16:2"
1325 }
1326
1327 # MPD supports various audio output types, as well as playing through multiple
1328 # audio outputs at the same time, through multiple audio_output settings
1329 # blocks. Setting this block is optional, though the server will only attempt
1330 # autodetection for one sound card.
1331 #
1332 # An example of an ALSA output:
1333 #
1334 #audio_output {
1335 #       type            "alsa"
1336 #       name            "My ALSA Device"
1337 ##      device          "hw:0,0"        # optional
1338 ##      mixer_type      "hardware"      # optional
1339 ##      mixer_device    "default"       # optional
1340 ##      mixer_control   "PCM"           # optional
1341 ##      mixer_index     "0"             # optional
1342 #}
1343 #
1344 # An example of an OSS output:
1345 #
1346 #audio_output {
1347 #       type            "oss"
1348 #       name            "My OSS Device"
1349 ##      device          "/dev/dsp"      # optional
1350 ##      mixer_type      "hardware"      # optional
1351 ##      mixer_device    "/dev/mixer"    # optional
1352 ##      mixer_control   "PCM"           # optional
1353 #}
1354 #
1355 # An example of a shout output (for streaming to Icecast):
1356 #
1357 #audio_output {
1358 #       type            "shout"
1359 #       encoder         "vorbis"                # optional
1360 #       name            "My Shout Stream"
1361 #       host            "localhost"
1362 #       port            "8000"
1363 #       mount           "/mpd.ogg"
1364 #       password        "hackme"
1365 #       quality         "5.0"
1366 #       bitrate         "128"
1367 #       format          "44100:16:1"
1368 ##      protocol        "icecast2"              # optional
1369 ##      user            "source"                # optional
1370 ##      description     "My Stream Description" # optional
1371 ##      url             "http://example.com"    # optional
1372 ##      genre           "jazz"                  # optional
1373 ##      public          "no"                    # optional
1374 ##      timeout         "2"                     # optional
1375 ##      mixer_type      "software"              # optional
1376 #}
1377 #
1378 # An example of a recorder output:
1379 #
1380 #audio_output {
1381 #       type            "recorder"
1382 #       name            "My recorder"
1383 #       encoder         "vorbis"                # optional, vorbis or lame
1384 #       path            "/var/lib/mpd/recorder/mpd.ogg"
1385 ##      quality         "5.0"                   # do not define if bitrate is defined
1386 #       bitrate         "128"                   # do not define if quality is defined
1387 #       format          "44100:16:1"
1388 #}
1389 #
1390 # An example of a httpd output (built-in HTTP streaming server):
1391 #
1392 #audio_output {
1393 #       type            "httpd"
1394 #       name            "My HTTP Stream"
1395 #       encoder         "vorbis"                # optional, vorbis or lame
1396 #       port            "8000"
1397 #       bind_to_address "0.0.0.0"               # optional, IPv4 or IPv6
1398 ##      quality         "5.0"                   # do not define if bitrate is defined
1399 #       bitrate         "128"                   # do not define if quality is defined
1400 #       format          "44100:16:1"
1401 #       max_clients     "0"                     # optional 0=no limit
1402 #}
1403 #
1404 # An example of a pulseaudio output (streaming to a remote pulseaudio server)
1405 #
1406 #audio_output {
1407 #       type            "pulse"
1408 #       name            "My Pulse Output"
1409 ##      server          "remote_server"         # optional
1410 ##      sink            "remote_server_sink"    # optional
1411 #}
1412 #
1413 # An example of a winmm output (Windows multimedia API).
1414 #
1415 #audio_output {
1416 #       type            "winmm"
1417 #       name            "My WinMM output"
1418 ##      device          "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1419 #               or
1420 ##      device          "0"             # optional
1421 ##      mixer_type      "hardware"      # optional
1422 #}
1423 #
1424 # An example of an openal output.
1425 #
1426 #audio_output {
1427 #       type            "openal"
1428 #       name            "My OpenAL output"
1429 ##      device          "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1430 #}
1431 #
1432 # An example of an sndio output.
1433 #
1434 #audio_output {
1435 #       type            "sndio"
1436 #       name            "sndio output"
1437 #       mixer_type      "software"
1438 #}
1439 #
1440 # An example of an OS X output:
1441 #
1442 #audio_output {
1443 #       type            "osx"
1444 #       name            "My OS X Device"
1445 ##      device          "Built-in Output"       # optional
1446 ##      channel_map      "-1,-1,0,1"    # optional
1447 #}
1448 #
1449 ## Example "pipe" output:
1450 #
1451 #audio_output {
1452 #       type            "pipe"
1453 #       name            "my pipe"
1454 #       command         "aplay -f cd 2>/dev/null"
1455 ## Or if you're want to use AudioCompress
1456 #       command         "AudioCompress -m | aplay -f cd 2>/dev/null"
1457 ## Or to send raw PCM stream through PCM:
1458 #       command         "nc example.org 8765"
1459 #       format          "44100:16:2"
1460 #}
1461 #
1462 ## An example of a null output (for no audio output):
1463 #
1464 #audio_output {
1465 #       type            "null"
1466 #       name            "My Null Output"
1467 #       mixer_type      "none"                  # optional
1468 #}
1469 #
1470 ###############################################################################
1471
1472
1473 # Normalization automatic volume adjustments ##################################
1474 #
1475 # This setting specifies the type of ReplayGain to use. This setting can have
1476 # the argument "off", "album", "track" or "auto". "auto" is a special mode that
1477 # chooses between "track" and "album" depending on the current state of
1478 # random playback. If random playback is enabled then "track" mode is used.
1479 # See <http://www.replaygain.org> for more details about ReplayGain.
1480 # This setting is off by default.
1481 #
1482 #replaygain                     "album"
1483 #
1484 # This setting sets the pre-amp used for files that have ReplayGain tags. By
1485 # default this setting is disabled.
1486 #
1487 #replaygain_preamp              "0"
1488 #
1489 # This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1490 # By default this setting is disabled.
1491 #
1492 #replaygain_missing_preamp      "0"
1493 #
1494 # This setting enables or disables ReplayGain limiting.
1495 # MPD calculates actual amplification based on the ReplayGain tags
1496 # and replaygain_preamp / replaygain_missing_preamp setting.
1497 # If replaygain_limit is enabled MPD will never amplify audio signal
1498 # above its original level. If replaygain_limit is disabled such amplification
1499 # might occur. By default this setting is enabled.
1500 #
1501 #replaygain_limit               "yes"
1502 #
1503 # This setting enables on-the-fly normalization volume adjustment. This will
1504 # result in the volume of all playing audio to be adjusted so the output has
1505 # equal "loudness". This setting is disabled by default.
1506 #
1507 #volume_normalization           "no"
1508 #
1509 ###############################################################################
1510
1511 # Character Encoding ##########################################################
1512 #
1513 # If file or directory names do not display correctly for your locale then you
1514 # may need to modify this setting.
1515 #
1516 #filesystem_charset             "UTF-8"
1517 #
1518 ###############################################################################
1519 #+end_src
1520
1521 ** msmtp
1522 :PROPERTIES:
1523 :header-args+: :tangle ~/.msmtprc
1524 :END:
1525
1526 #+begin_src conf
1527 # Set default values for all following accounts.
1528 defaults
1529 port 587
1530 tls on
1531 auth on
1532 #tls_trust_file /etc/ssl/certs/ca-certificates.crt
1533 logfile ~/.msmtp.log
1534
1535 # aminb
1536 account aminb
1537 host nix.aminb.org
1538 # use `msmtp -a aminb --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1539 tls_fingerprint 98:C7:F0:02:7F:2B:D8:B6:D3:BF:E8:C1:D4:07:6B:B5:6C:B1:C7:5D:97:20:70:88:AB:9E:B5:09:5D:2C:DC:8E
1540 tls_starttls on
1541 from amin@aminb.org
1542 user amin@aminb.org
1543 passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
1544
1545 # gnu
1546 account gnu
1547 host fencepost.gnu.org
1548 # use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1549 tls_fingerprint 28:70:42:76:1C:EC:91:5F:D1:B3:27:A1:CD:3B:32:A4:8B:0B:DC:3A:CD:CA:F6:6F:E4:61:BA:69:D7:4D:0D:0B
1550 tls_starttls on
1551 from aminb@gnu.org
1552 user aminb
1553 passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
1554
1555 # gnu (amin)
1556 account gnu-amin : gnu
1557 from amin@gnu.org
1558
1559 # gnu (mab)
1560 account gnu-mab : gnu
1561 from mab@gnu.org
1562
1563 # uwaterloo
1564 account uwaterloo
1565 host connect.uwaterloo.ca
1566 tls_starttls on
1567 from abandali@uwaterloo.ca
1568 user abandali
1569 passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
1570 tls_trust_file /etc/ssl/certs/ca-certificates.crt
1571
1572 # Set a default account
1573 account default : aminb
1574 #+end_src
1575
1576 ** ncmpcpp
1577
1578 *** config
1579 :PROPERTIES:
1580 :header-args+: :tangle ~/.ncmpcpp/config
1581 :END:
1582
1583 #+begin_src conf :tangle no
1584 ##############################################################
1585 ## This is the example configuration file. Copy it to       ##
1586 ## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
1587 ## and set up your preferences.                             ##
1588 ##############################################################
1589 #
1590 ##### directories ######
1591 ##
1592 ## Directory for storing ncmpcpp related files.
1593 ## Changing it is useful if you want to store
1594 ## everything somewhere else and provide command
1595 ## line setting for alternative location to config
1596 ## file which defines that while launching ncmpcpp.
1597 ##
1598 #
1599 ncmpcpp_directory = ~/.ncmpcpp
1600 #
1601 ##
1602 ## Directory for storing downloaded lyrics. It
1603 ## defaults to ~/.lyrics since other MPD clients
1604 ## (eg. ncmpc) also use that location.
1605 ##
1606 #
1607 #lyrics_directory = ~/.lyrics
1608 #
1609 ##### connection settings #####
1610 #
1611 #mpd_host = localhost
1612 #
1613 #mpd_port = 6600
1614 #
1615 #mpd_connection_timeout = 5
1616 #
1617 ## Needed for tag editor and file operations to work.
1618 ##
1619 mpd_music_dir = ~/usr/music
1620 #
1621 #mpd_crossfade_time = 5
1622 #
1623 ##### music visualizer #####
1624 ##
1625 ## Note: In order to make music visualizer work you'll
1626 ## need to use mpd fifo output, whose format parameter
1627 ## has to be set to 44100:16:1 for mono visualization
1628 ## or 44100:16:2 for stereo visualization. Example
1629 ## configuration (it has to be put into mpd.conf):
1630 ##
1631 ## audio_output {
1632 ##        type            "fifo"
1633 ##        name            "Visualizer feed"
1634 ##        path            "/tmp/mpd.fifo"
1635 ##        format          "44100:16:2"
1636 ## }
1637 ##
1638 #
1639 visualizer_fifo_path = /tmp/mpd.fifo
1640 #
1641 ##
1642 ## Note: Below parameter is needed for ncmpcpp
1643 ## to determine which output provides data for
1644 ## visualizer and thus allow syncing between
1645 ## visualization and sound as currently there
1646 ## are some problems with it.
1647 ##
1648 #
1649 visualizer_output_name = my fifo
1650 #
1651 ##
1652 ## If you set format to 44100:16:2, make it 'yes'.
1653 ##
1654 visualizer_in_stereo = yes
1655 #
1656 ##
1657 ## Multiply received samples by given value. Very
1658 ## useful for proper visualization of quiet music.
1659 ##
1660 #visualizer_sample_multiplier = 1
1661 #
1662 ##
1663 ## Note: Below parameter defines how often ncmpcpp
1664 ## has to "synchronize" visualizer and audio outputs.
1665 ## 30 seconds is optimal value, but if you experience
1666 ## synchronization problems, set it to lower value.
1667 ## Keep in mind that sane values start with >=10.
1668 ##
1669 #
1670 visualizer_sync_interval = 30
1671 #
1672 ##
1673 ## Note: To enable spectrum frequency visualization
1674 ## you need to compile ncmpcpp with fftw3 support.
1675 ##
1676 #
1677 ## Available values: spectrum, wave, wave_filled, ellipse.
1678 ##
1679 visualizer_type = spectrum
1680 #
1681 #visualizer_look = ●▮
1682 visualizer_look = "●•"
1683 #
1684 #visualizer_color = blue, cyan, green, yellow, magenta, red
1685 #
1686 ## Alternative subset of 256 colors for terminals that support it.
1687 ##
1688 #visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
1689 #
1690 ##### system encoding #####
1691 ##
1692 ## ncmpcpp should detect your charset encoding
1693 ## but if it failed to do so, you can specify
1694 ## charset encoding you are using here.
1695 ##
1696 ## Note: You can see whether your ncmpcpp build
1697 ## supports charset detection by checking output
1698 ## of `ncmpcpp --version`.
1699 ##
1700 ## Note: Since MPD uses UTF-8 by default, setting
1701 ## this option makes sense only if your encoding
1702 ## is different.
1703 ##
1704 #
1705 #system_encoding = ""
1706 #
1707 ##### delays #####
1708 #
1709 ## Time of inactivity (in seconds) after playlist
1710 ## highlighting will be disabled (0 = always on).
1711 ##
1712 #playlist_disable_highlight_delay = 5
1713 #
1714 ## Defines how long messages are supposed to be visible.
1715 ##
1716 #message_delay_time = 5
1717 #
1718 ##### song format #####
1719 ##
1720 ## For a song format you can use:
1721 ##
1722 ## %l - length
1723 ## %f - filename
1724 ## %D - directory
1725 ## %a - artist
1726 ## %A - album artist
1727 ## %t - title
1728 ## %b - album
1729 ## %y - date
1730 ## %n - track number (01/12 -> 01)
1731 ## %N - full track info (01/12 -> 01/12)
1732 ## %g - genre
1733 ## %c - composer
1734 ## %p - performer
1735 ## %d - disc
1736 ## %C - comment
1737 ## %P - priority
1738 ## $R - begin right alignment
1739 ##
1740 ## If you want to make sure that a part of the format is displayed
1741 ## only when certain tags are present, you can archieve it by
1742 ## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
1743 ## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
1744 ## It is also possible to define a list of alternatives by providing
1745 ## several groups and separating them with '|', e.g. '{%t}|{%f}'
1746 ## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
1747 ## present.
1748 ##
1749 ## Note: If you want to set limit on maximal length of a tag, just
1750 ## put the appropriate number between % and character that defines
1751 ## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
1752 ##
1753 ## In addition, formats support markers used for text attributes.
1754 ## They are followed by character '$'. After that you can put:
1755 ##
1756 ## - 0 - default window color (discards all other colors)
1757 ## - 1 - black
1758 ## - 2 - red
1759 ## - 3 - green
1760 ## - 4 - yellow
1761 ## - 5 - blue
1762 ## - 6 - magenta
1763 ## - 7 - cyan
1764 ## - 8 - white
1765 ## - 9 - end of current color
1766 ## - b - bold text
1767 ## - u - underline text
1768 ## - r - reverse colors
1769 ## - a - use alternative character set
1770 ##
1771 ## If you don't want to use a non-color attribute anymore, just put it
1772 ## again, but this time insert character '/' between '$' and attribute
1773 ## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
1774 ## or filename with reversed colors.
1775 ##
1776 ## If you want to use 256 colors and/or background colors in formats
1777 ## (the naming scheme is described below in section about color
1778 ## definitions), it can be done with the syntax $(COLOR), e.g. to set
1779 ## the artist tag to one of the non-standard colors and make it have
1780 ## yellow background, you need to write $(197_yellow)%a$(end). Note
1781 ## that for standard colors this is interchangable with attributes
1782 ## listed above.
1783 ##
1784 ## Note: colors can be nested.
1785 ##
1786 #
1787 #song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
1788 #
1789 #song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
1790 #
1791 #song_library_format = {%n - }{%t}|{%f}
1792 #
1793 #
1794 #alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
1795 #
1796 #alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
1797 #
1798 #now_playing_prefix = $b
1799 #
1800 #now_playing_suffix = $/b
1801 #
1802 #browser_playlist_prefix = "$2playlist$9 "
1803 #
1804 #selected_item_prefix = $6
1805 #
1806 #selected_item_suffix = $9
1807 #
1808 #modified_item_prefix = $3> $9
1809 #
1810 ##
1811 ## Note: attributes are not supported for the following variables.
1812 ##
1813 #song_window_title_format = {%a - }{%t}|{%f}
1814 ##
1815 ## Note: Below variables are used for sorting songs in browser.
1816 ## The sort mode determines how songs are sorted, and can be used
1817 ## in combination with a sort format to specify a custom sorting format.
1818 ## Available values for browser_sort_mode are "name", "mtime", "format"
1819 ## and "noop".
1820 ##
1821 #
1822 #browser_sort_mode = name
1823 #
1824 #browser_sort_format = {%a - }{%t}|{%f} {(%l)}
1825 #
1826 ##### columns settings #####
1827 ##
1828 ## syntax of song columns list format is "column column etc."
1829 ##
1830 ## - syntax for each column is:
1831 ##
1832 ## (width of the column)[color of the column]{displayed tag}
1833 ##
1834 ## Note: Width is by default in %, if you want a column to
1835 ## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
1836 ## will be the column that take 10% of screen (so the real width
1837 ## will depend on actual screen size), whereas (10f)[white]{a}
1838 ## will take 10 terminal cells, no matter how wide the screen is.
1839 ##
1840 ## - color is optional (if you want the default one,
1841 ##   leave the field empty).
1842 ##
1843 ## Note: You can give a column additional attributes by putting appropriate
1844 ## character after displayed tag character. Available attributes are:
1845 ##
1846 ## - r - column will be right aligned
1847 ## - E - if tag is empty, empty tag marker won't be displayed
1848 ##
1849 ## You can also:
1850 ##
1851 ## - give a column custom name by putting it after attributes,
1852 ##   separated with character ':', e.g. {lr:Length} gives you
1853 ##   right aligned column of lengths named "Length".
1854 ##
1855 ## - define sequence of tags, that have to be displayed in case
1856 ##   predecessor is empty in a way similar to the one in classic
1857 ##   song format, i.e. using '|' character, e.g. {a|c|p:Owner}
1858 ##   creates column named "Owner" that tries to display artist
1859 ##   tag and then composer and performer if previous ones are
1860 ##   not available.
1861 ##
1862 #
1863 #song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
1864 #
1865 ##### various settings #####
1866 #
1867 ##
1868 ## Note: Custom command that will be executed each
1869 ## time song changes. Useful for notifications etc.
1870 ##
1871 #execute_on_song_change = ""
1872 #
1873 #playlist_show_mpd_host = no
1874 #
1875 #playlist_show_remaining_time = no
1876 #
1877 #playlist_shorten_total_times = no
1878 #
1879 #playlist_separate_albums = no
1880 #
1881 ##
1882 ## Note: Possible display modes: classic, columns.
1883 ##
1884 #playlist_display_mode = columns
1885 #
1886 #browser_display_mode = classic
1887 #
1888 #search_engine_display_mode = classic
1889 #
1890 #playlist_editor_display_mode = classic
1891 #
1892 #discard_colors_if_item_is_selected = yes
1893 #
1894 #incremental_seeking = yes
1895 #
1896 #seek_time = 1
1897 #
1898 #volume_change_step = 2
1899 #
1900 #autocenter_mode = no
1901 #
1902 #centered_cursor = no
1903 #
1904 ##
1905 ## Note: You can specify third character which will
1906 ## be used to build 'empty' part of progressbar.
1907 ##
1908 #progressbar_look = =>
1909 progressbar_look = "─╼╶"
1910 #progressbar_look = "─⊙╶"
1911 #
1912 #progressbar_boldness = yes
1913 #
1914 ## Available values: database, playlist.
1915 ##
1916 #default_place_to_search_in = database
1917 #
1918 ## Available values: classic, alternative.
1919 ##
1920 #user_interface = classic
1921 #
1922 #data_fetching_delay = yes
1923 #
1924 ## Available values: artist, album_artist, date, genre, composer, performer.
1925 ##
1926 #media_library_primary_tag = artist
1927 #
1928 ## Available values: wrapped, normal.
1929 ##
1930 #default_find_mode = wrapped
1931 #
1932 #default_tag_editor_pattern = %n - %t
1933 #
1934 #header_visibility = yes
1935 #
1936 #statusbar_visibility = yes
1937 #
1938 #titles_visibility = yes
1939 #
1940 #header_text_scrolling = yes
1941 #
1942 #cyclic_scrolling = no
1943 #
1944 #lines_scrolled = 2
1945 #
1946 #follow_now_playing_lyrics = no
1947 #
1948 #fetch_lyrics_for_current_song_in_background = no
1949 #
1950 #store_lyrics_in_song_dir = no
1951 #
1952 #generate_win32_compatible_filenames = yes
1953 #
1954 #allow_for_physical_item_deletion = no
1955 #
1956 ##
1957 ## Note: If you set this variable, ncmpcpp will try to
1958 ## get info from last.fm in language you set and if it
1959 ## fails, it will fall back to english. Otherwise it will
1960 ## use english the first time.
1961 ##
1962 ## Note: Language has to be expressed as an ISO 639 alpha-2 code.
1963 ##
1964 #lastfm_preferred_language = en
1965 #
1966 #show_hidden_files_in_local_browser = no
1967 #
1968 ##
1969 ## How shall screen switcher work?
1970 ##
1971 ## - "previous" - switch between the current and previous screen.
1972 ## - "screen1,...,screenN" - switch between given sequence of screens.
1973 ##
1974 ## Screens available for use: help, playlist, browser, search_engine,
1975 ## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
1976 ##
1977 #screen_switcher_mode = playlist, browser
1978 #
1979 ##
1980 ## Note: You can define startup screen
1981 ## by choosing screen from the list above.
1982 ##
1983 #startup_screen = playlist
1984 #
1985 ##
1986 ## Note: You can define startup slave screen
1987 ## by choosing screen from the list above or
1988 ## an empty value for no slave screen.
1989 ##
1990 #startup_slave_screen = ""
1991 #
1992 #startup_slave_screen_focus = no
1993 #
1994 ##
1995 ## Default width of locked screen (in %).
1996 ## Acceptable values are from 20 to 80.
1997 ##
1998 #
1999 #locked_screen_width_part = 50
2000 #
2001 #ask_for_locked_screen_width_part = yes
2002 #
2003 #jump_to_now_playing_song_at_start = yes
2004 #
2005 #ask_before_clearing_playlists = yes
2006 #
2007 #clock_display_seconds = no
2008 #
2009 #display_volume_level = yes
2010 #
2011 #display_bitrate = no
2012 #
2013 #display_remaining_time = no
2014 #
2015 ## Available values: none, basic, extended, perl.
2016 ##
2017 #regular_expressions = perl
2018 #
2019 ##
2020 ## Note: If below is enabled, ncmpcpp will ignore leading
2021 ## "The" word while sorting items in browser, tags in
2022 ## media library, etc.
2023 ##
2024 #ignore_leading_the = no
2025 #
2026 #block_search_constraints_change_if_items_found = yes
2027 #
2028 #mouse_support = yes
2029 #
2030 #mouse_list_scroll_whole_page = yes
2031 #
2032 #empty_tag_marker = <empty>
2033 #
2034 #tags_separator = " | "
2035 #
2036 #tag_editor_extended_numeration = no
2037 #
2038 #media_library_sort_by_mtime = no
2039 #
2040 #enable_window_title = yes
2041 #
2042 ##
2043 ## Note: You can choose default search mode for search
2044 ## engine. Available modes are:
2045 ##
2046 ## - 1 - use mpd built-in searching (no regexes, pattern matching)
2047 ## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
2048 ##       but if your mpd is on a remote machine, downloading big database
2049 ##       to process it can take a while
2050 ## - 3 - match only exact values (this mode uses mpd function for searching
2051 ##       in database and local one for searching in current playlist)
2052 ##
2053 #
2054 #search_engine_default_search_mode = 1
2055 #
2056 #external_editor = nano
2057 #
2058 ## Note: set to yes if external editor is a console application.
2059 ##
2060 #use_console_editor = yes
2061 #
2062 ##### colors definitions #####
2063 ##
2064 ## It is possible to set a background color by setting a color
2065 ## value "<foreground>_<background>", e.g. red_black will set
2066 ## foregound color to red and background color to black.
2067 ##
2068 ## In addition, for terminals that support 256 colors it
2069 ## is possible to set one of them by using a number in range
2070 ## [1, 256] instead of color name, e.g. numerical value
2071 ## corresponding to red_black is 2_1. To find out if the
2072 ## terminal supports 256 colors, run ncmpcpp and check out
2073 ## the bottom of the help screen for list of available colors
2074 ## and their numerical values.
2075 ##
2076 ## Note: due to technical limitations of ncurses, if 256 colors
2077 ## are used, it is possible to either use only the colors with
2078 ## default background color, or all pairs from 1_1 up to 254_127,
2079 ## depending on the ncurses version used.
2080 ##
2081 #
2082 #colors_enabled = yes
2083 #
2084 #empty_tag_color = cyan
2085 #
2086 #header_window_color = default
2087 #
2088 #volume_color = default
2089 #
2090 #state_line_color = default
2091 #
2092 #state_flags_color = default
2093 #
2094 #main_window_color = yellow
2095 #
2096 #color1 = white
2097 #
2098 #color2 = green
2099 #
2100 #main_window_highlight_color = yellow
2101 #
2102 #progressbar_color = black
2103 #
2104 #progressbar_elapsed_color = green
2105 #
2106 #statusbar_color = default
2107 #
2108 #alternative_ui_separator_color = black
2109 #
2110 #active_column_color = red
2111 #
2112 #window_border_color = green
2113 #
2114 #active_window_border = red
2115 #
2116 #+end_src
2117
2118 *** bindings
2119 :PROPERTIES:
2120 :header-args+: :tangle ~/.ncmpcpp/bindings
2121 :END:
2122
2123 #+begin_src conf :tangle no
2124 def_key "j"
2125     scroll_down
2126 def_key "k"
2127     scroll_up
2128
2129 def_key "ctrl-u"
2130     page_up
2131 def_key "ctrl-d"
2132     page_down
2133
2134 def_key "h"
2135     previous_column
2136 def_key "l"
2137     next_column
2138
2139 def_key "."
2140     show_lyrics
2141
2142 def_key "n"
2143     next_found_item
2144 def_key "N"
2145     previous_found_item
2146
2147 def_key "J"
2148     move_sort_order_down
2149 def_key "K"
2150     move_sort_order_up
2151 #+end_src
2152
2153 ** notmuch
2154
2155 *** notmuch-config
2156 :PROPERTIES:
2157 :header-args+: :tangle ~/.notmuch-config
2158 :END:
2159
2160 #+begin_src conf
2161 # .notmuch-config - Configuration file for the notmuch mail system
2162 #
2163 # For more information about notmuch, see https://notmuchmail.org
2164
2165 # Database configuration
2166 #
2167 # The only value supported here is 'path' which should be the top-level
2168 # directory where your mail currently exists and to where mail will be
2169 # delivered in the future. Files should be individual email messages.
2170 # Notmuch will store its database within a sub-directory of the path
2171 # configured here named ".notmuch".
2172 #
2173 [database]
2174 path=/home/amin/mail
2175
2176 # User configuration
2177 #
2178 # Here is where you can let notmuch know how you would like to be
2179 # addressed. Valid settings are
2180 #
2181 #       name            Your full name.
2182 #       primary_email   Your primary email address.
2183 #       other_email     A list (separated by ';') of other email addresses
2184 #                       at which you receive email.
2185 #
2186 # Notmuch will use the various email addresses configured here when
2187 # formatting replies. It will avoid including your own addresses in the
2188 # recipient list of replies, and will set the From address based on the
2189 # address to which the original email was addressed.
2190 #
2191 [user]
2192 name=Amin Bandali
2193 primary_email=amin@aminb.org
2194 other_email=amin@gnu.org;abandali@uwaterloo.ca;mab@gnu.org;aminb@gnu.org;
2195
2196 # Configuration for "notmuch new"
2197 #
2198 # The following options are supported here:
2199 #
2200 #       tags    A list (separated by ';') of the tags that will be
2201 #               added to all messages incorporated by "notmuch new".
2202 #
2203 #       ignore  A list (separated by ';') of file and directory names
2204 #               that will not be searched for messages by "notmuch new".
2205 #
2206 #               NOTE: *Every* file/directory that goes by one of those
2207 #               names will be ignored, independent of its depth/location
2208 #               in the mail store.
2209 #
2210 [new]
2211 tags=new;
2212 #tags=unread;inbox;
2213 ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
2214
2215 # Search configuration
2216 #
2217 # The following option is supported here:
2218 #
2219 #       exclude_tags
2220 #               A ;-separated list of tags that will be excluded from
2221 #               search results by default.  Using an excluded tag in a
2222 #               query will override that exclusion.
2223 #
2224 [search]
2225 exclude_tags=deleted;spam;
2226
2227 # Maildir compatibility configuration
2228 #
2229 # The following option is supported here:
2230 #
2231 #       synchronize_flags      Valid values are true and false.
2232 #
2233 #       If true, then the following maildir flags (in message filenames)
2234 #       will be synchronized with the corresponding notmuch tags:
2235 #
2236 #               Flag    Tag
2237 #               ----    -------
2238 #               D       draft
2239 #               F       flagged
2240 #               P       passed
2241 #               R       replied
2242 #               S       unread (added when 'S' flag is not present)
2243 #
2244 #       The "notmuch new" command will notice flag changes in filenames
2245 #       and update tags, while the "notmuch tag" and "notmuch restore"
2246 #       commands will notice tag changes and update flags in filenames
2247 #
2248 [maildir]
2249 synchronize_flags=true
2250
2251 # Cryptography related configuration
2252 #
2253 # The following option is supported here:
2254 #
2255 #       gpg_path
2256 #               binary name or full path to invoke gpg.
2257 #
2258 [crypto]
2259 gpg_path=gpg
2260 #+end_src
2261
2262 *** pre-new hook
2263 :PROPERTIES:
2264 :header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
2265 :END:
2266
2267 #+begin_src sh
2268 touch /tmp/gnusieve.log
2269 sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
2270              -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
2271 #+end_src
2272
2273 *** post-new hook
2274 :PROPERTIES:
2275 :header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
2276 :END:
2277
2278 #+begin_src sh
2279 # apply sent tag to messages sent by me
2280 notmuch tag -new +sent -- from:amin@aminb.org or from:amin@gnu.org or from:mab@gnu.org or from:aminb@gnu.org or from:abandali@uwaterloo.ca
2281
2282 # initial tagging
2283 notmuch tag -latest                     -- tag:latest
2284 notmuch tag +inbox +unread +latest -new -- tag:new
2285
2286
2287 # apply tags to lists
2288
2289 # <aminb>
2290 notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
2291 notmuch tag -inbox +lists/haskell-weekly   -- folder:amin/lists/haskell-weekly
2292
2293 notmuch tag -inbox +pay     -- folder:amin/pay
2294 notmuch tag -inbox +banking -- folder:amin/banking
2295 notmuch tag -inbox +work    -- folder:amin/work
2296 # </aminb>
2297
2298 # <uw>
2299 notmuch tag -inbox +uw/cs136  -- folder:uwaterloo/lists/cs136
2300 notmuch tag -inbox +uw/cs846  -- folder:uwaterloo/lists/cs846
2301 notmuch tag -inbox +uw/ece750 -- folder:uwaterloo/lists/ece750
2302 notmuch tag -inbox +uw/se212  -- folder:uwaterloo/lists/se212
2303 notmuch tag -inbox +uw/se463  -- folder:uwaterloo/lists/se463
2304
2305 notmuch tag -inbox +lists/alloytools       -- folder:uwaterloo/lists/alloytools
2306 notmuch tag -inbox +lists/clvsingle        -- folder:uwaterloo/lists/Clvsingle
2307 notmuch tag -inbox +lists/gsa              -- folder:uwaterloo/lists/GSA
2308 notmuch tag -inbox +lists/math-grad        -- folder:uwaterloo/lists/Math-grad
2309 notmuch tag -inbox +lists/scs-grads        -- folder:uwaterloo/lists/scs-grads
2310 notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
2311 # </uw>
2312
2313 # <gnu>
2314 notmuch tag -inbox +l/emacs-devel       -- folder:gnu/l/emacs-devel
2315 notmuch tag -inbox +l/emacs-orgmode     -- folder:gnu/l/emacs-orgmode
2316 notmuch tag -inbox +l/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
2317 notmuch tag -inbox +l/fencepost-users   -- folder:gnu/l/fencepost-users
2318 notmuch tag -inbox +l/guix-devel        -- folder:gnu/l/guix-devel
2319 notmuch tag -inbox +l/guile-devel       -- folder:gnu/l/guile-devel
2320 notmuch tag -inbox +l/help-gnu-emacs    -- folder:gnu/l/help-gnu-emacs
2321 notmuch tag -inbox +l/info-gnu-emacs    -- folder:gnu/l/info-gnu-emacs
2322 notmuch tag -inbox +l/www-commits       -- folder:gnu/l/www-commits
2323 notmuch tag -inbox +l/www-discuss       -- folder:gnu/l/www-discuss
2324 notmuch tag -inbox +webmasters          -- folder:gnu/webmasters
2325
2326 notmuch tag -inbox +l/deepspec     -- folder:gnu/l/deepspec
2327 notmuch tag -inbox +l/haskell-cafe -- folder:gnu/l/haskell-cafe
2328 notmuch tag -inbox +l/haskell-art  -- folder:gnu/l/haskell-art
2329 notmuch tag -inbox +l/notmuch      -- folder:gnu/l/notmuch
2330
2331 notmuch tag -inbox +l/~aminb/test-priv         -- folder:gnu/l/~aminb/test-priv
2332 notmuch tag -inbox +l/~sircmpwn/sr.ht-admins   -- folder:gnu/l/~sircmpwn/sr.ht-admins
2333 notmuch tag -inbox +l/~sircmpwn/sr.ht-announce -- folder:gnu/l/~sircmpwn/sr.ht-announce
2334 notmuch tag -inbox +l/~sircmpwn/sr.ht-dev      -- folder:gnu/l/~sircmpwn/sr.ht-dev
2335 notmuch tag -inbox +l/~sircmpwn/sr.ht-discuss  -- folder:gnu/l/~sircmpwn/sr.ht-discuss
2336 # </gnu>
2337
2338 notmuch tag -inbox -unread +archive/notmuch     -- path:archive/notmuch/**
2339 notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**
2340 #+end_src
2341
2342 *** notmuch.service
2343 :PROPERTIES:
2344 :header-args+: :tangle ~/.config/systemd/user/notmuch.service
2345 :END:
2346
2347 #+begin_src conf :tangle no
2348 [Unit]
2349 Description=notmuch service
2350
2351 [Service]
2352 Type=oneshot
2353 ExecStart=/usr/bin/notmuch new
2354 StandardOutput=syslog
2355 StandardError=syslog
2356 #+end_src
2357
2358 *** notmuch.timer
2359 :PROPERTIES:
2360 :header-args+: :tangle ~/.config/systemd/user/notmuch.timer
2361 :END:
2362
2363 #+begin_src conf :tangle no
2364 [Unit]
2365 Description=notmuch timer
2366
2367 [Timer]
2368 OnCalendar=*:0/5
2369 Persistent=true
2370 Unit=notmuch.service
2371
2372 [Install]
2373 WantedBy=timers.target
2374 #+end_src
2375
2376 ** offlineimap
2377
2378 *** offlineimaprc
2379 :PROPERTIES:
2380 :header-args+: :tangle ~/.offlineimaprc
2381 :END:
2382
2383 #+begin_src conf :tangle no
2384 [general]
2385 pythonfile = ~/.offlineimap.py
2386 accounts = Gmail, aminb
2387 maxsyncaccounts = 3
2388
2389 [Account Gmail]
2390 localrepository = GmailL
2391 remoterepository = GmailR
2392
2393 [Account aminb]
2394 localrepository = aminbL
2395 remoterepository = aminbR
2396
2397 [Repository GmailL]
2398 type = Maildir
2399 localfolders = ~/Maildir/Gmail
2400
2401 [Repository GmailR]
2402 type = IMAP
2403 remotehost = imap.gmail.com
2404 remoteusereval = mailuser("gmail")
2405 remotepasseval = mailpasswd("gmail")
2406 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2407 ssl = yes
2408 folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
2409 maxconnections = 1
2410 realdelete = no
2411
2412 [Repository aminbL]
2413 type = Maildir
2414 localfolders = ~/Maildir/aminb
2415
2416 [Repository aminbR]
2417 type = IMAP
2418 remotehost = mail.aminb.org
2419 remoteusereval = mailuser("aminb")
2420 remotepasseval = mailpasswd("aminb")
2421 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2422 ssl = yes
2423 folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
2424 maxconnections = 1
2425 realdelete = no
2426 #+end_src
2427
2428 *** offlineimap.py
2429 :PROPERTIES:
2430 :header-args+: :tangle ~/.offlineimap.py
2431 :END:
2432
2433 #+begin_src python :tangle no
2434 import os
2435 import subprocess
2436
2437 def mailpasswd(acct):
2438     acct = os.path.basename(acct)
2439     path = "/home/amin/.passwd/%s.gpg" % acct
2440     args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
2441     try:
2442         return subprocess.check_output(args).strip()
2443     except subprocess.CalledProcessError:
2444         return ""
2445
2446 def mailuser(acct):
2447     acct = os.path.basename(acct)
2448     path = "/home/amin/.passwd/%s" % acct
2449     args = ["cat", path]
2450     try:
2451         return subprocess.check_output(args).strip()
2452     except subprocess.CalledProcessError:
2453         return ""
2454
2455 def prime_gpg_agent():
2456   ret = False
2457   i = 1
2458   while not ret:
2459     ret = (mailpasswd("prime") == "prime")
2460     if i > 2:
2461       from offlineimap.ui import getglobalui
2462       sys.stderr.write("Error reading in passwords. Terminating.\n")
2463       getglobalui().terminate()
2464     i += 1
2465   return ret
2466
2467 prime_gpg_agent()
2468 #+end_src
2469
2470 ** pigeonhole
2471 *** gnu.sieve
2472 :PROPERTIES:
2473 :header-args+: :tangle ~/sieve/gnu.sieve :comments none
2474 :END:
2475
2476 #+begin_src conf
2477 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags", "include" ];
2478
2479 if anyof (
2480   address :is "from" "webmasters@gnu.org",
2481   address :is "from" "webmasters-comment@gnu.org") {
2482   fileinto :create "webmasters";
2483   stop;
2484 }
2485
2486 include :personal "lists";
2487 #+end_src
2488
2489 *** lists.sieve
2490 :PROPERTIES:
2491 :header-args+: :tangle ~/sieve/lists.sieve :comments none
2492 :END:
2493
2494 #+begin_src conf
2495 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags",
2496  "include" ];
2497
2498 if anyof (
2499     header :contains "list-id" "<emacs-devel.gnu.org>",
2500     header :contains "list-id" "<emacs-orgmode.gnu.org>",
2501     header :contains "list-id" "<emacsconf-discuss.gnu.org>",
2502     header :contains "list-id" "<fencepost-users.gnu.org>",
2503     header :contains "list-id" "<guix-devel.gnu.org>",
2504     header :contains "list-id" "<guile-devel.gnu.org>",
2505     header :contains "list-id" "<help-gnu-emacs.gnu.org>",
2506     header :contains "list-id" "<info-gnu-emacs.gnu.org>",
2507     header :contains "list-id" "<www-commits.gnu.org>",
2508     header :contains "list-id" "<www-discuss.gnu.org>",
2509     header :contains "list-id" "<deepspec.lists.cs.princeton.edu>",
2510     header :contains "list-id" "<haskell-cafe.haskell.org>",
2511     header :contains "list-id" "<haskell-art.we.lurk.org>",
2512     header :contains "list-id" "<notmuch.notmuchmail.org>") {
2513     if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
2514         set :lower "listname" "${1}";
2515         fileinto :create "l/${listname}";
2516     }
2517 }
2518
2519 if anyof (
2520     header :contains "list-id" "<~aminb/test-priv@lists.sr.ht>",
2521     header :contains "list-id" "<~sircmpwn/sr.ht-admins@lists.sr.ht>",
2522     header :contains "list-id" "<~sircmpwn/sr.ht-announce@lists.sr.ht>",
2523     header :contains "list-id" "<~sircmpwn/sr.ht-dev@lists.sr.ht>",
2524     header :contains "list-id" "<~sircmpwn/sr.ht-discuss@lists.sr.ht>") {
2525     if header :regex "list-id" "(~[a-z_0-9-]+)/([a-z_0-9.-]+)@" {
2526         set :lower "username" "${1}";
2527         set :lower "listname" "${2}";
2528         fileinto :create "l/${username}/${listname}";
2529     }
2530 }
2531 #+end_src
2532
2533 ** polybar
2534
2535 *** config
2536 :PROPERTIES:
2537 :header-args+: :tangle ~/.config/polybar/config
2538 :END:
2539
2540 #+begin_src conf :tangle no
2541 ;=====================================================
2542 ;
2543 ;   To learn more about how to configure Polybar
2544 ;   go to https://github.com/jaagr/polybar
2545 ;
2546 ;   The README contains alot of information
2547 ;
2548 ;=====================================================
2549
2550 [colors]
2551 ;background = ${xrdb:color0:#222}
2552 background = #222
2553 background-alt = #444
2554 ;foreground = ${xrdb:color7:#222}
2555 foreground = #eee
2556 foreground-alt = #888
2557 primary = #ffb52a
2558 secondary = #e60053
2559 alert = #bd2c40
2560
2561 [bar/main]
2562 ;monitor = ${env:MONITOR:HDMI-1}
2563 width = 100%
2564 height = 27
2565 ;offset-x = 1%
2566 ;offset-y = 1%
2567 radius = 3.0
2568 fixed-center = true
2569
2570 background = ${colors.background}
2571 foreground = ${colors.foreground}
2572
2573 line-size = 3
2574 line-color = #f00
2575
2576 border-size = 4
2577 border-color = #00000000
2578
2579 padding-left = 0
2580 padding-right = 2
2581
2582 module-margin-left = 2
2583 module-margin-right = 2
2584
2585 font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
2586 font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
2587 font-2 = Wuncon Siji:pixelsize=10;1
2588 font-3 = FontAwesome:pixelsize=10;1
2589
2590 modules-left = bspwm xwindow
2591 modules-center =
2592 modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
2593
2594 tray-position = right
2595 tray-padding = 1
2596 ;tray-transparent = true
2597 ;tray-background = #0063ff
2598 tray-maxsize = 18
2599
2600 wm-restack = bspwm
2601
2602 ;override-redirect = true
2603
2604 scroll-up = bspwm-desknext
2605 scroll-down = bspwm-deskprev
2606
2607 [module/xwindow]
2608 type = internal/xwindow
2609 label = %title:0:50:...%
2610
2611 [module/xkeyboard]
2612 type = internal/xkeyboard
2613 blacklist-0 = num lock
2614
2615 format-prefix = " "
2616 format-prefix-foreground = ${colors.foreground-alt}
2617 format-prefix-underline = ${colors.secondary}
2618
2619 label-layout = %layout%
2620 label-layout-underline = ${colors.secondary}
2621
2622 label-indicator-padding = 2
2623 label-indicator-margin = 1
2624 label-indicator-background = ${colors.secondary}
2625 label-indicator-underline = ${colors.secondary}
2626
2627 [module/filesystem]
2628 type = internal/fs
2629 interval = 25
2630
2631 mount-0 = /
2632
2633 label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
2634 label-unmounted = %mountpoint% not mounted
2635 label-unmounted-foreground = ${colors.foreground-alt}
2636
2637 [module/bspwm]
2638 type = internal/bspwm
2639
2640 label-focused = %index%
2641 label-focused-background = ${colors.background-alt}
2642 label-focused-underline= ${colors.primary}
2643 label-focused-padding = 2
2644
2645 label-occupied = %index%
2646 label-occupied-padding = 2
2647
2648 label-urgent = %index%!
2649 label-urgent-background = ${colors.alert}
2650 label-urgent-padding = 2
2651
2652 label-empty = %index%
2653 label-empty-foreground = ${colors.foreground-alt}
2654 label-empty-padding = 2
2655
2656 [module/i3]
2657 type = internal/i3
2658 format = <label-state> <label-mode>
2659 index-sort = true
2660 wrapping-scroll = false
2661
2662 ; Only show workspaces on the same output as the bar
2663 ;pin-workspaces = true
2664
2665 label-mode-padding = 2
2666 label-mode-foreground = #000
2667 label-mode-background = ${colors.primary}
2668
2669 ; focused = Active workspace on focused monitor
2670 label-focused = %index%
2671 label-focused-background = ${module/bspwm.label-focused-background}
2672 label-focused-underline = ${module/bspwm.label-focused-underline}
2673 label-focused-padding = ${module/bspwm.label-focused-padding}
2674
2675 ; unfocused = Inactive workspace on any monitor
2676 label-unfocused = %index%
2677 label-unfocused-padding = ${module/bspwm.label-occupied-padding}
2678
2679 ; visible = Active workspace on unfocused monitor
2680 label-visible = %index%
2681 label-visible-background = ${self.label-focused-background}
2682 label-visible-underline = ${self.label-focused-underline}
2683 label-visible-padding = ${self.label-focused-padding}
2684
2685 ; urgent = Workspace with urgency hint set
2686 label-urgent = %index%
2687 label-urgent-background = ${module/bspwm.label-urgent-background}
2688 label-urgent-padding = ${module/bspwm.label-urgent-padding}
2689
2690 [module/mpd]
2691 type = internal/mpd
2692 format-online = <label-song>  <icon-prev> <icon-stop> <toggle> <icon-next>
2693
2694 icon-prev = 
2695 icon-stop = 
2696 icon-play = 
2697 icon-pause = 
2698 icon-next = 
2699
2700 label-song-maxlen = 25
2701 label-song-ellipsis = true
2702
2703 [module/xbacklight]
2704 type = internal/xbacklight
2705
2706 format = <label> <bar>
2707 label = BL
2708
2709 bar-width = 10
2710 bar-indicator = |
2711 bar-indicator-foreground = #ff
2712 bar-indicator-font = 2
2713 bar-fill = ─
2714 bar-fill-font = 2
2715 bar-fill-foreground = #9f78e1
2716 bar-empty = ─
2717 bar-empty-font = 2
2718 bar-empty-foreground = ${colors.foreground-alt}
2719
2720 [module/backlight-acpi]
2721 inherit = module/xbacklight
2722 type = internal/backlight
2723 ;card = intel_backlight
2724 card = mba6x_backlight
2725
2726 [module/cpu]
2727 type = internal/cpu
2728 interval = 2
2729 format-prefix = " "
2730 format-prefix-foreground = ${colors.foreground-alt}
2731 format-underline = #f90000
2732 label = %percentage%%
2733
2734 [module/memory]
2735 type = internal/memory
2736 interval = 2
2737 format-prefix = " "
2738 format-prefix-foreground = ${colors.foreground-alt}
2739 format-underline = #4bffdc
2740 label = %percentage_used%%
2741
2742 [module/wlan]
2743 type = internal/network
2744 interface =
2745 interval = 3.0
2746
2747 format-connected = <ramp-signal> <label-connected>
2748 format-connected-underline = #9f78e1
2749 label-connected = %essid%
2750
2751 format-disconnected =
2752 ;format-disconnected = <label-disconnected>
2753 ;format-disconnected-underline = ${self.format-connected-underline}
2754 ;label-disconnected = %ifname% disconnected
2755 ;label-disconnected-foreground = ${colors.foreground-alt}
2756
2757 ramp-signal-0 = 
2758 ramp-signal-1 = 
2759 ramp-signal-2 = 
2760 ramp-signal-3 = 
2761 ramp-signal-4 = 
2762 ramp-signal-foreground = ${colors.foreground-alt}
2763
2764 [module/eth]
2765 type = internal/network
2766 interface =
2767 interval = 3.0
2768
2769 format-connected-underline = #55aa55
2770 format-connected-prefix = " "
2771 format-connected-prefix-foreground = ${colors.foreground-alt}
2772 label-connected = %local_ip%
2773
2774 format-disconnected =
2775 ;format-disconnected = <label-disconnected>
2776 ;format-disconnected-underline = ${self.format-connected-underline}
2777 ;label-disconnected = %ifname% disconnected
2778 ;label-disconnected-foreground = ${colors.foreground-alt}
2779
2780 [module/date]
2781 type = internal/date
2782 interval = 5
2783
2784 date =
2785 date-alt = " %Y-%m-%d"
2786
2787 time = %H:%M
2788 time-alt = %H:%M:%S
2789
2790 format-prefix = 
2791 format-prefix-foreground = ${colors.foreground-alt}
2792 format-underline = #0a6cf5
2793
2794 label = %date% %time%
2795
2796 [module/volume]
2797 type = internal/volume
2798
2799 format-volume = <label-volume> <bar-volume>
2800 label-volume = vol
2801 label-volume-foreground = ${root.foreground}
2802
2803 format-muted-prefix = " "
2804 format-muted-foreground = ${colors.foreground-alt}
2805 label-muted = mute
2806
2807 bar-volume-width = 10
2808 bar-volume-foreground-0 = #55aa55
2809 bar-volume-foreground-1 = #55aa55
2810 bar-volume-foreground-2 = #55aa55
2811 bar-volume-foreground-3 = #55aa55
2812 bar-volume-foreground-4 = #55aa55
2813 bar-volume-foreground-5 = #f5a70a
2814 bar-volume-foreground-6 = #ff5555
2815 bar-volume-gradient = false
2816 bar-volume-indicator = |
2817 bar-volume-indicator-font = 2
2818 bar-volume-fill = ─
2819 bar-volume-fill-font = 2
2820 bar-volume-empty = ─
2821 bar-volume-empty-font = 2
2822 bar-volume-empty-foreground = ${colors.foreground-alt}
2823
2824 [module/battery]
2825 type = internal/battery
2826 battery = BAT0
2827 adapter = ADP1
2828 full-at = 64
2829
2830 format-charging = <animation-charging> <label-charging>
2831 format-charging-underline = #ffb52a
2832
2833 format-discharging = <ramp-capacity> <label-discharging>
2834 format-discharging-underline = ${self.format-charging-underline}
2835
2836 format-full-prefix = " "
2837 format-full-prefix-foreground = ${colors.foreground-alt}
2838 format-full-underline = ${self.format-charging-underline}
2839
2840 ramp-capacity-0 = 
2841 ramp-capacity-1 = 
2842 ramp-capacity-2 = 
2843 ramp-capacity-foreground = ${colors.foreground-alt}
2844
2845 animation-charging-0 = 
2846 animation-charging-1 = 
2847 animation-charging-2 = 
2848 animation-charging-foreground = ${colors.foreground-alt}
2849 animation-charging-framerate = 750
2850
2851 [module/temperature]
2852 type = internal/temperature
2853 thermal-zone = 1
2854 warn-temperature = 66
2855
2856 format = <ramp> <label>
2857 format-underline = #f50a4d
2858 format-warn = <ramp> <label-warn>
2859 format-warn-underline = ${self.format-underline}
2860
2861 label = %temperature%
2862 label-warn = %temperature%
2863 label-warn-foreground = ${colors.secondary}
2864
2865 ramp-0 = 
2866 ramp-1 = 
2867 ramp-2 = 
2868 ramp-foreground = ${colors.foreground-alt}
2869
2870 [module/powermenu]
2871 type = custom/menu
2872
2873 format-spacing = 1
2874
2875 label-open = 
2876 label-open-foreground = ${colors.secondary}
2877 label-close =  cancel
2878 label-close-foreground = ${colors.secondary}
2879 label-separator = |
2880 label-separator-foreground = ${colors.foreground-alt}
2881
2882 menu-0-0 = reboot
2883 menu-0-0-exec = menu-open-1
2884 menu-0-1 = power off
2885 menu-0-1-exec = menu-open-2
2886
2887 menu-1-0 = cancel
2888 menu-1-0-exec = menu-open-0
2889 menu-1-1 = reboot
2890 menu-1-1-exec = sudo reboot
2891
2892 menu-2-0 = power off
2893 menu-2-0-exec = sudo poweroff
2894 menu-2-1 = cancel
2895 menu-2-1-exec = menu-open-0
2896
2897 [module/mail]
2898 type = custom/script
2899 interval = 60
2900 format = <label>
2901 format-prefix = " "
2902 format-prefix-foreground = ${colors.foreground-alt}
2903 format-underline = #0a6cf5
2904 exec = notmuch count tag:unread
2905
2906 [settings]
2907 screenchange-reload = true
2908 ;compositing-background = xor
2909 ;compositing-background = screen
2910 ;compositing-foreground = source
2911 ;compositing-border = over
2912
2913 [global/wm]
2914 margin-top = 0
2915 margin-bottom = 0
2916
2917 ; vim:ft=dosini
2918 #+end_src
2919
2920 *** polybar-launch
2921 :PROPERTIES:
2922 :header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
2923 :END:
2924
2925 #+begin_src sh :tangle no
2926 # Terminate already running bar instances
2927 killall -q polybar
2928
2929 # Wait until the processes have been shut down
2930 while pgrep -x polybar >/dev/null; do sleep 1; done
2931
2932 # Launch main bar
2933 polybar main &
2934
2935 echo "Bars launched..."
2936 #+end_src
2937
2938 ** PowerTOP
2939 :PROPERTIES:
2940 :header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
2941 :END:
2942
2943 #+begin_src conf
2944 [Unit]
2945 Description=Powertop tunings
2946
2947 [Service]
2948 ExecStart=/usr/bin/powertop --auto-tune
2949 RemainAfterExit=true
2950
2951 [Install]
2952 WantedBy=multi-user.target
2953 #+end_src
2954
2955 ** ranger
2956
2957 *** rc.conf
2958 :PROPERTIES:
2959 :header-args+: :tangle ~/.config/ranger/rc.conf
2960 :END:
2961
2962 #+begin_src conf :tangle no
2963 # ===================================================================
2964 # This file contains the default startup commands for ranger.
2965 # To change them, it is recommended to create the file
2966 # ~/.config/ranger/rc.conf and add your custom commands there.
2967 #
2968 # If you copy this whole file there, you may want to set the environment
2969 # variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
2970 #
2971 # The purpose of this file is mainly to define keybindings and settings.
2972 # For running more complex python code, please create a plugin in "plugins/" or
2973 # a command in "commands.py".
2974 #
2975 # Each line is a command that will be run before the user interface
2976 # is initialized.  As a result, you can not use commands which rely
2977 # on the UI such as :delete or :mark.
2978 # ===================================================================
2979
2980 # ===================================================================
2981 # == Options
2982 # ===================================================================
2983
2984 # How many columns are there, and what are their relative widths?
2985 set column_ratios 1,3,4
2986
2987 # Which files should be hidden? (regular expression)
2988 set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
2989
2990 # Show hidden files? You can toggle this by typing 'zh'
2991 set show_hidden false
2992
2993 # Ask for a confirmation when running the "delete" command?
2994 # Valid values are "always" (default), "never", "multiple"
2995 # With "multiple", ranger will ask only if you delete multiple files at once.
2996 set confirm_on_delete multiple
2997
2998 # Which script is used to generate file previews?
2999 # ranger ships with scope.sh, a script that calls external programs (see
3000 # README for dependencies) to preview images, archives, etc.
3001 set preview_script ~/.config/ranger/scope.sh
3002
3003 # Use the external preview script or display simple plain text previews?
3004 set use_preview_script true
3005
3006 # Open all images in this directory when running certain image viewers
3007 # like feh or sxiv?  You can still open selected files by marking them.
3008 set open_all_images true
3009
3010 # Be aware of version control systems and display information.
3011 set vcs_aware false
3012
3013 # State of the three backends git, hg, bzr. The possible states are
3014 # disabled, local (only show local info), enabled (show local and remote
3015 # information).
3016 set vcs_backend_git enabled
3017 set vcs_backend_hg disabled
3018 set vcs_backend_bzr disabled
3019
3020 # Preview images in full color with the external command "w3mimgpreview"?
3021 # This requires the console web browser "w3m" and a supported terminal.
3022 # It has been successfully tested with "xterm" and "urxvt" without tmux.
3023 set preview_images true
3024
3025 # Use a unicode "..." character to mark cut-off filenames?
3026 set unicode_ellipsis false
3027
3028 # Show dotfiles in the bookmark preview box?
3029 set show_hidden_bookmarks true
3030
3031 # Which colorscheme to use?  These colorschemes are available by default:
3032 # default, jungle, snow
3033 set colorscheme default
3034
3035 # Preview files on the rightmost column?
3036 # And collapse (shrink) the last column if there is nothing to preview?
3037 set preview_files true
3038 set preview_directories true
3039 set collapse_preview true
3040
3041 # Save the console history on exit?
3042 set save_console_history true
3043
3044 # Draw the status bar on top of the browser window (default: bottom)
3045 set status_bar_on_top false
3046
3047 # Draw a progress bar in the status bar which displays the average state of all
3048 # currently running tasks which support progress bars?
3049 set draw_progress_bar_in_status_bar true
3050
3051 # Draw borders around columns?
3052 set draw_borders true
3053
3054 # Display the directory name in tabs?
3055 set dirname_in_tabs false
3056
3057 # Enable the mouse support?
3058 set mouse_enabled true
3059
3060 # Display the file size in the main column or status bar?
3061 set display_size_in_main_column true
3062 set display_size_in_status_bar true
3063
3064 # Display files tags in all columns or only in main column?
3065 set display_tags_in_all_columns true
3066
3067 # Set a title for the window?
3068 set update_title false
3069
3070 # Set the title to "ranger" in the tmux program?
3071 set update_tmux_title false
3072
3073 # Shorten the title if it gets long?  The number defines how many
3074 # directories are displayed at once, 0 turns off this feature.
3075 set shorten_title 3
3076
3077 # Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
3078 set tilde_in_titlebar false
3079
3080 # How many directory-changes or console-commands should be kept in history?
3081 set max_history_size 20
3082 set max_console_history_size 50
3083
3084 # Try to keep so much space between the top/bottom border when scrolling:
3085 set scroll_offset 8
3086
3087 # Flush the input after each key hit?  (Noticable when ranger lags)
3088 set flushinput true
3089
3090 # Padding on the right when there's no preview?
3091 # This allows you to click into the space to run the file.
3092 set padding_right true
3093
3094 # Save bookmarks (used with mX and `X) instantly?
3095 # This helps to synchronize bookmarks between multiple ranger
3096 # instances but leads to *slight* performance loss.
3097 # When false, bookmarks are saved when ranger is exited.
3098 set autosave_bookmarks true
3099
3100 # You can display the "real" cumulative size of directories by using the
3101 # command :get_cumulative_size or typing "dc".  The size is expensive to
3102 # calculate and will not be updated automatically.  You can choose
3103 # to update it automatically though by turning on this option:
3104 set autoupdate_cumulative_size false
3105
3106 # Turning this on makes sense for screen readers:
3107 set show_cursor false
3108
3109 # One of: size, basename, mtime, type
3110 set sort natural
3111
3112 # Additional sorting options
3113 set sort_reverse false
3114 set sort_case_insensitive true
3115 set sort_directories_first true
3116
3117 # Enable this if key combinations with the Alt Key don't work for you.
3118 # (Especially on xterm)
3119 set xterm_alt_key false
3120
3121 # ===================================================================
3122 # == Local Options
3123 # ===================================================================
3124 # You can set local options that only affect a single directory.
3125
3126 # Examples:
3127 # setlocal path=~/downloads sort mtime
3128
3129 # ===================================================================
3130 # == Command Aliases in the Console
3131 # ===================================================================
3132
3133 alias e    edit
3134 alias q    quit
3135 alias q!   quitall
3136 alias qall quitall
3137 alias setl setlocal
3138
3139 alias filter     scout -prt
3140 alias find       scout -aet
3141 alias mark       scout -mr
3142 alias unmark     scout -Mr
3143 alias search     scout -rs
3144 alias search_inc scout -rts
3145 alias travel     scout -aefiklst
3146
3147 # ===================================================================
3148 # == Define keys for the browser
3149 # ===================================================================
3150
3151 # Basic
3152 map     Q quit!
3153 map     q quit
3154 copymap q ZZ ZQ
3155
3156 map R     reload_cwd
3157 map <C-r> reset
3158 map <C-l> redraw_window
3159 map <C-c> abort
3160 map <esc> change_mode normal
3161
3162 map i display_file
3163 map ? help
3164 map W display_log
3165 map w taskview_open
3166 map S shell $SHELL
3167
3168 map :  console
3169 map ;  console
3170 map !  console shell
3171 map @  console -p6 shell  %%s
3172 map #  console shell -p
3173 map s  console shell
3174 map r  chain draw_possible_programs; console open_with
3175 map f  console find
3176 map cd console cd
3177
3178 # Tagging / Marking
3179 map t       tag_toggle
3180 map ut      tag_remove
3181 map "<any>  tag_toggle tag=%any
3182 map <Space> mark_files toggle=True
3183 map v       mark_files all=True toggle=True
3184 map uv      mark_files all=True val=False
3185 map V       toggle_visual_mode
3186 map uV      toggle_visual_mode reverse=True
3187
3188 # For the nostalgics: Midnight Commander bindings
3189 map <F1> help
3190 map <F3> display_file
3191 map <F4> edit
3192 map <F5> copy
3193 map <F6> cut
3194 map <F7> console mkdir
3195 map <F8> console delete
3196 map <F10> exit
3197
3198 # In case you work on a keyboard with dvorak layout
3199 map <UP>       move up=1
3200 map <DOWN>     move down=1
3201 map <LEFT>     move left=1
3202 map <RIGHT>    move right=1
3203 map <HOME>     move to=0
3204 map <END>      move to=-1
3205 map <PAGEDOWN> move down=1   pages=True
3206 map <PAGEUP>   move up=1     pages=True
3207 map <CR>       move right=1
3208 map <DELETE>   console delete
3209 map <INSERT>   console touch
3210
3211 # VIM-like
3212 copymap <UP>       k
3213 copymap <DOWN>     j
3214 copymap <LEFT>     h
3215 copymap <RIGHT>    l
3216 copymap <HOME>     gg
3217 copymap <END>      G
3218 copymap <PAGEDOWN> <C-F>
3219 copymap <PAGEUP>   <C-B>
3220
3221 map J  move down=0.5  pages=True
3222 map K  move up=0.5    pages=True
3223 copymap J <C-D>
3224 copymap K <C-U>
3225
3226 # Jumping around
3227 map H     history_go -1
3228 map L     history_go 1
3229 map ]     move_parent 1
3230 map [     move_parent -1
3231 map }     traverse
3232
3233 map gh cd ~
3234 map ge cd /etc
3235 map gu cd /usr
3236 map gd cd /dev
3237 map gl cd -r .
3238 map gL cd -r %f
3239 map go cd /opt
3240 map gv cd /var
3241 map gm cd /media
3242 map gM cd /mnt
3243 map gs cd /srv
3244 map gr cd /
3245 map gR eval fm.cd(ranger.RANGERDIR)
3246 map g/ cd /
3247 map g? cd /usr/share/doc/ranger
3248
3249 # External Programs
3250 map E  edit
3251 map du shell -p du --max-depth=1 -h --apparent-size
3252 map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
3253 map yp shell -d echo -n %d/%f | xsel -i
3254 map yd shell -d echo -n %d    | xsel -i
3255 map yn shell -d echo -n %f    | xsel -i
3256
3257 # Filesystem Operations
3258 map =  chmod
3259
3260 map cw console rename
3261 map A  eval fm.open_console('rename ' + fm.thisfile.basename)
3262 map I  eval fm.open_console('rename ' + fm.thisfile.basename, position=7)
3263
3264 map pp paste
3265 map po paste overwrite=True
3266 map pl paste_symlink relative=False
3267 map pL paste_symlink relative=True
3268 map phl paste_hardlink
3269 map pht paste_hardlinked_subtree
3270
3271 map dd cut
3272 map ud uncut
3273 map da cut mode=add
3274 map dr cut mode=remove
3275
3276 map yy copy
3277 map uy uncut
3278 map ya copy mode=add
3279 map yr copy mode=remove
3280
3281 # Temporary workarounds
3282 map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
3283 map dG  eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
3284 map dj  eval fm.cut(dirarg=dict(down=1), narg=quantifier)
3285 map dk  eval fm.cut(dirarg=dict(up=1), narg=quantifier)
3286 map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
3287 map yG  eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
3288 map yj  eval fm.copy(dirarg=dict(down=1), narg=quantifier)
3289 map yk  eval fm.copy(dirarg=dict(up=1), narg=quantifier)
3290
3291 # Searching
3292 map /  console search
3293 map n  search_next
3294 map N  search_next forward=False
3295 map ct search_next order=tag
3296 map cs search_next order=size
3297 map ci search_next order=mimetype
3298 map cc search_next order=ctime
3299 map cm search_next order=mtime
3300 map ca search_next order=atime
3301
3302 # Tabs
3303 map <C-n>     tab_new ~
3304 map <C-w>     tab_close
3305 map <TAB>     tab_move 1
3306 map <S-TAB>   tab_move -1
3307 map <A-Right> tab_move 1
3308 map <A-Left>  tab_move -1
3309 map gt        tab_move 1
3310 map gT        tab_move -1
3311 map gn        tab_new ~
3312 map gc        tab_close
3313 map uq        tab_restore
3314 map <a-1>     tab_open 1
3315 map <a-2>     tab_open 2
3316 map <a-3>     tab_open 3
3317 map <a-4>     tab_open 4
3318 map <a-5>     tab_open 5
3319 map <a-6>     tab_open 6
3320 map <a-7>     tab_open 7
3321 map <a-8>     tab_open 8
3322 map <a-9>     tab_open 9
3323
3324 # Sorting
3325 map or toggle_option sort_reverse
3326 map os chain set sort=size;      set sort_reverse=False
3327 map ob chain set sort=basename;  set sort_reverse=False
3328 map on chain set sort=natural;   set sort_reverse=False
3329 map om chain set sort=mtime;     set sort_reverse=False
3330 map oc chain set sort=ctime;     set sort_reverse=False
3331 map oa chain set sort=atime;     set sort_reverse=False
3332 map ot chain set sort=type;      set sort_reverse=False
3333
3334 map oS chain set sort=size;      set sort_reverse=True
3335 map oB chain set sort=basename;  set sort_reverse=True
3336 map oN chain set sort=natural;   set sort_reverse=True
3337 map oM chain set sort=mtime;     set sort_reverse=True
3338 map oC chain set sort=ctime;     set sort_reverse=True
3339 map oA chain set sort=atime;     set sort_reverse=True
3340 map oT chain set sort=type;      set sort_reverse=True
3341
3342 map dc get_cumulative_size
3343
3344 # Settings
3345 map zc    toggle_option collapse_preview
3346 map zd    toggle_option sort_directories_first
3347 map zh    toggle_option show_hidden
3348 map <C-h> toggle_option show_hidden
3349 map zi    toggle_option flushinput
3350 map zm    toggle_option mouse_enabled
3351 map zp    toggle_option preview_files
3352 map zP    toggle_option preview_directories
3353 map zs    toggle_option sort_case_insensitive
3354 map zu    toggle_option autoupdate_cumulative_size
3355 map zv    toggle_option use_preview_script
3356 map zf    console filter
3357
3358 # Bookmarks
3359 map `<any>  enter_bookmark %any
3360 map '<any>  enter_bookmark %any
3361 map m<any>  set_bookmark %any
3362 map um<any> unset_bookmark %any
3363
3364 map m<bg>   draw_bookmarks
3365 copymap m<bg>  um<bg> `<bg> '<bg>
3366
3367 # Generate all the chmod bindings with some python help:
3368 eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
3369 eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
3370 eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
3371 eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
3372 eval for arg in "rwxXst": cmd("map +{0}  shell -d chmod u+{0} %s".format(arg))
3373
3374 eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
3375 eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
3376 eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
3377 eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
3378 eval for arg in "rwxXst": cmd("map -{0}  shell -d chmod u-{0} %s".format(arg))
3379
3380 # ===================================================================
3381 # == Define keys for the console
3382 # ===================================================================
3383 # Note: Unmapped keys are passed directly to the console.
3384
3385 # Basic
3386 cmap <tab>   eval fm.ui.console.tab()
3387 cmap <s-tab> eval fm.ui.console.tab(-1)
3388 cmap <ESC>   eval fm.ui.console.close()
3389 cmap <CR>    eval fm.ui.console.execute()
3390 cmap <C-l>   redraw_window
3391
3392 copycmap <ESC> <C-c>
3393 copycmap <CR>  <C-j>
3394
3395 # Move around
3396 cmap <up>    eval fm.ui.console.history_move(-1)
3397 cmap <down>  eval fm.ui.console.history_move(1)
3398 cmap <left>  eval fm.ui.console.move(left=1)
3399 cmap <right> eval fm.ui.console.move(right=1)
3400 cmap <home>  eval fm.ui.console.move(right=0, absolute=True)
3401 cmap <end>   eval fm.ui.console.move(right=-1, absolute=True)
3402
3403 # Line Editing
3404 cmap <backspace>  eval fm.ui.console.delete(-1)
3405 cmap <delete>     eval fm.ui.console.delete(0)
3406 cmap <C-w>        eval fm.ui.console.delete_word()
3407 cmap <C-k>        eval fm.ui.console.delete_rest(1)
3408 cmap <C-u>        eval fm.ui.console.delete_rest(-1)
3409 cmap <C-y>        eval fm.ui.console.paste()
3410
3411 # And of course the emacs way
3412 copycmap <up>        <C-p>
3413 copycmap <down>      <C-n>
3414 copycmap <left>      <C-b>
3415 copycmap <right>     <C-f>
3416 copycmap <home>      <C-a>
3417 copycmap <end>       <C-e>
3418 copycmap <delete>    <C-d>
3419 copycmap <backspace> <C-h>
3420
3421 # Note: There are multiple ways to express backspaces.  <backspace> (code 263)
3422 # and <backspace2> (code 127).  To be sure, use both.
3423 copycmap <backspace> <backspace2>
3424
3425 # This special expression allows typing in numerals:
3426 cmap <allow_quantifiers> false
3427
3428 # ===================================================================
3429 # == Pager Keybindings
3430 # ===================================================================
3431
3432 # Movement
3433 pmap  <down>      pager_move  down=1
3434 pmap  <up>        pager_move  up=1
3435 pmap  <left>      pager_move  left=4
3436 pmap  <right>     pager_move  right=4
3437 pmap  <home>      pager_move  to=0
3438 pmap  <end>       pager_move  to=-1
3439 pmap  <pagedown>  pager_move  down=1.0  pages=True
3440 pmap  <pageup>    pager_move  up=1.0    pages=True
3441 pmap  <C-d>       pager_move  down=0.5  pages=True
3442 pmap  <C-u>       pager_move  up=0.5    pages=True
3443
3444 copypmap <UP>       k  <C-p>
3445 copypmap <DOWN>     j  <C-n> <CR>
3446 copypmap <LEFT>     h
3447 copypmap <RIGHT>    l
3448 copypmap <HOME>     g
3449 copypmap <END>      G
3450 copypmap <C-d>      d
3451 copypmap <C-u>      u
3452 copypmap <PAGEDOWN> n  f  <C-F>  <Space>
3453 copypmap <PAGEUP>   p  b  <C-B>
3454
3455 # Basic
3456 pmap     <ESC> pager_close
3457 copypmap <ESC> q Q i <F3>
3458 pmap E      edit_file
3459
3460 # ===================================================================
3461 # == Taskview Keybindings
3462 # ===================================================================
3463
3464 # Movement
3465 tmap <up>        taskview_move up=1
3466 tmap <down>      taskview_move down=1
3467 tmap <home>      taskview_move to=0
3468 tmap <end>       taskview_move to=-1
3469 tmap <pagedown>  taskview_move down=1.0  pages=True
3470 tmap <pageup>    taskview_move up=1.0    pages=True
3471 tmap <C-d>       taskview_move down=0.5  pages=True
3472 tmap <C-u>       taskview_move up=0.5    pages=True
3473
3474 copytmap <UP>       k  <C-p>
3475 copytmap <DOWN>     j  <C-n> <CR>
3476 copytmap <HOME>     g
3477 copytmap <END>      G
3478 copytmap <C-u>      u
3479 copytmap <PAGEDOWN> n  f  <C-F>  <Space>
3480 copytmap <PAGEUP>   p  b  <C-B>
3481
3482 # Changing priority and deleting tasks
3483 tmap J          eval -q fm.ui.taskview.task_move(-1)
3484 tmap K          eval -q fm.ui.taskview.task_move(0)
3485 tmap dd         eval -q fm.ui.taskview.task_remove()
3486 tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
3487 tmap <pageup>   eval -q fm.ui.taskview.task_move(0)
3488 tmap <delete>   eval -q fm.ui.taskview.task_remove()
3489
3490 # Basic
3491 tmap <ESC> taskview_close
3492 copytmap <ESC> q Q w <C-c>
3493 #+end_src
3494
3495 *** scope.sh
3496 :PROPERTIES:
3497 :header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
3498 :END:
3499
3500 #+begin_src sh :tangle no
3501 # ranger supports enhanced previews.  If the option "use_preview_script"
3502 # is set to True and this file exists, this script will be called and its
3503 # output is displayed in ranger.  ANSI color codes are supported.
3504
3505 # NOTES: This script is considered a configuration file.  If you upgrade
3506 # ranger, it will be left untouched. (You must update it yourself.)
3507 # Also, ranger disables STDIN here, so interactive scripts won't work properly
3508
3509 # Meanings of exit codes:
3510 # code | meaning    | action of ranger
3511 # -----+------------+-------------------------------------------
3512 # 0    | success    | success. display stdout as preview
3513 # 1    | no preview | failure. display no preview at all
3514 # 2    | plain text | display the plain content of the file
3515 # 3    | fix width  | success. Don't reload when width changes
3516 # 4    | fix height | success. Don't reload when height changes
3517 # 5    | fix both   | success. Don't ever reload
3518
3519 # Meaningful aliases for arguments:
3520 path="$1"    # Full path of the selected file
3521 width="$2"   # Width of the preview pane (number of fitting characters)
3522 height="$3"  # Height of the preview pane (number of fitting characters)
3523
3524 maxln=200    # Stop after $maxln lines.  Can be used like ls | head -n $maxln
3525
3526 # Find out something about the file:
3527 mimetype=$(file --mime-type -Lb "$path")
3528 extension=${path##*.}
3529
3530 # Functions:
3531 # runs a command and saves its output into $output.  Useful if you need
3532 # the return value AND want to use the output in a pipe
3533 try() { output=$(eval '"$@"'); }
3534
3535 # writes the output of the previouosly used "try" command
3536 dump() { echo "$output"; }
3537
3538 # a common post-processing function used after most commands
3539 trim() { head -n "$maxln"; }
3540
3541 # wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
3542 highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }
3543
3544 case "$extension" in
3545     # Archive extensions:
3546     7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
3547     rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
3548         try als "$path" && { dump | trim; exit 0; }
3549         try acat "$path" && { dump | trim; exit 3; }
3550         try bsdtar -lf "$path" && { dump | trim; exit 0; }
3551         exit 1;;
3552     rar)
3553         try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
3554     # PDF documents:
3555     pdf)
3556         try pdftotext -l 10 -nopgbrk -q "$path" - && \
3557             { dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
3558     # BitTorrent Files
3559     torrent)
3560         try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
3561     # HTML Pages:
3562     htm|html|xhtml)
3563         try w3m    -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3564         try lynx   -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3565         try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3566         ;; # fall back to highlight/cat if the text browsers fail
3567 esac
3568
3569 case "$mimetype" in
3570     # Syntax highlight for text files:
3571     text/* | */xml)
3572         try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
3573     # Ascii-previews of images:
3574     image/*)
3575         img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
3576     # Display information about media files:
3577     video/* | audio/*)
3578         exiftool "$path" && exit 5
3579         # Use sed to remove spaces so the output fits into the narrow window
3580         try mediainfo "$path" && { dump | trim | sed 's/  \+:/: /;';  exit 5; } || exit 1;;
3581 esac
3582
3583 exit 1
3584 #+end_src
3585
3586 ** redshift
3587 :PROPERTIES:
3588 :header-args+: :tangle ~/.config/redshift.conf :comments none
3589 :END:
3590
3591 #+begin_src conf
3592 ; Global settings for redshift
3593 [redshift]
3594 ; Set the day and night screen temperatures (Neutral is 6500K)
3595 ;temp-day=5700
3596 ;temp-night=3500
3597
3598 ;temp-day=6500
3599 temp-day=6200
3600 ;temp-night=4800
3601 ;temp-night=5000
3602 ;temp-night=4500
3603 temp-night=4000
3604
3605 ; Enable/Disable a smooth transition between day and night
3606 ; 0 will cause a direct change from day to night screen temperature.
3607 ; 1 will gradually increase or decrease the screen temperature.
3608 transition=1
3609
3610 ; Set the screen brightness. Default is 1.0.
3611 ;brightness=0.9
3612 ; It is also possible to use different settings for day and night
3613 ; since version 1.8.
3614 ;brightness-day=0.7
3615 ;brightness-night=0.4
3616 ; Set the screen gamma (for all colors, or each color channel
3617 ; individually)
3618 ;gamma=0.8
3619 ;gamma=1.0
3620 ;gamma=0.8:0.7:0.8
3621 ; This can also be set individually for day and night since
3622 ; version 1.10.
3623 ;gamma-day=0.8:0.7:0.8
3624 ;gamma-night=0.6
3625
3626 ; Set the location-provider: 'geoclue2' or 'manual'
3627 ; type 'redshift -l list' to see possible values.
3628 ; The location provider settings are in a different section.
3629 ;location-provider=manual
3630 location-provider=geoclue2
3631
3632 ; Set the adjustment-method: 'randr', 'vidmode'
3633 ; type 'redshift -m list' to see all possible values.
3634 ; 'randr' is the preferred method, 'vidmode' is an older API.
3635 ; but works in some cases when 'randr' does not.
3636 ; The adjustment method settings are in a different section.
3637 adjustment-method=randr
3638
3639 ; Configuration of the location-provider:
3640 ; type 'redshift -l PROVIDER:help' to see the settings.
3641 ; ex: 'redshift -l manual:help'
3642 ; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
3643 ; are negative numbers.
3644 ;[manual]
3645 ;lat=48.1
3646 ;lon=11.6
3647
3648 ; Configuration of the adjustment-method
3649 ; type 'redshift -m METHOD:help' to see the settings.
3650 ; ex: 'redshift -m randr:help'
3651 ; In this example, randr is configured to adjust screen 1.
3652 ; Note that the numbering starts from 0, so this is actually the
3653 ; second screen. If this option is not specified, Redshift will try
3654 ; to adjust _all_ screens.
3655 ;[randr]
3656 ;screen=1
3657 #+end_src
3658
3659 ** rofi
3660 :PROPERTIES:
3661 :header-args+: :tangle ~/.config/rofi/config
3662 :END:
3663
3664 #+begin_src conf
3665 rofi.font: Ubuntu Mono 13
3666 ! rofi.font: Inconsolata 16
3667 ! rofi.font: Iosevka 13
3668 ! rofi.font: Source Code Pro 11
3669 rofi.modi: run,window
3670 ! rofi.width: 640
3671 rofi.width: 600
3672 !rofi.location: 2
3673 !rofi.yoffset: 200
3674 rofi.monitor: -1
3675 !rofi.lines: 10
3676
3677 !rofi.theme: /usr/share/rofi/themes//Arc.rasi
3678 !rofi.theme: /usr/share/rofi/themes//Paper.rasi
3679 !rofi.theme: /usr/share/rofi/themes//sidebar.rasi
3680
3681 rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
3682 #+end_src
3683
3684 ** rofi-pass
3685 :PROPERTIES:
3686 :header-args+: :tangle ~/.config/rofi-pass/config
3687 :END:
3688
3689 #+begin_src conf
3690 # permanently set alternative root dir
3691 # root=/path/to/root
3692
3693 # rofi command. Make sure to have "$@" as last argument
3694 _rofi () {
3695     #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
3696     rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
3697 }
3698
3699 # xdotool needs the keyboard layout to be set using setxkbmap
3700 # You can do this in your autostart scripts (e.g. xinitrc)
3701
3702 # If for some reason, you cannot do this, you can set the command here.
3703 # and set fix_layout to true
3704 fix_layout=false
3705
3706 layout_cmd () {
3707   setxkbmap us
3708 }
3709
3710 # fields to be used
3711 URL_field='url'
3712 USERNAME_field='user'
3713 AUTOTYPE_field='autotype'
3714
3715 # delay to be used for :delay keyword
3716 delay=2
3717
3718 ## Programs to be used
3719 # Editor
3720 EDITOR='gvim -f'
3721
3722 # Browser
3723 BROWSER='chromium'
3724
3725 ## Misc settings
3726
3727 default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
3728 auto_enter='false'
3729 notify='false'
3730 default_autotype='user :tab pass'
3731
3732 # color of the help messages
3733 # leave empty for autodetection
3734 help_color="#4872FF"
3735
3736 # Clipboard settings
3737 # Possible options: primary, clipboard, both
3738 clip=primary
3739
3740 # Options for generating new password entries
3741 # default_user is also used for password files that have no user field.
3742 default_user=aminb
3743 default_user2=aminban
3744 password_length=30
3745
3746 # Custom Keybindings
3747 #autotype="Alt+1"
3748 autotype="Alt+m"
3749 type_user="Alt+2"
3750 type_pass="Alt+3"
3751 open_url="Alt+4"
3752 copy_name="Alt+u"
3753 copy_url="Alt+l"
3754 copy_pass="Alt+p"
3755 show="Alt+o"
3756 copy_entry="Alt+2"
3757 type_entry="Alt+1"
3758 copy_menu="Alt+c"
3759 action_menu="Alt+a"
3760 type_menu="Alt+t"
3761 help="Alt+h"
3762 switch="Alt+x"
3763 insert_pass="Alt+n"
3764 #+end_src
3765
3766 ** sway
3767 :PROPERTIES:
3768 :header-args+: :tangle ~/.config/sway/config
3769 :END:
3770
3771 #+begin_src conf
3772 exec xrdb .Xresources
3773 exec dunst
3774 exec pgrep -x "systemd-inhibit" || \
3775      systemd-inhibit --what=handle-power-key --who=aminb \
3776      --why="Handle power button in sway" sleep infinity
3777
3778 ### Variables
3779 # super
3780 set $mod Mod4
3781 # alt
3782 set $mod2 Mod1
3783 set $left h
3784 set $down j
3785 set $up k
3786 set $right l
3787 set $term urxvt
3788 set $menu rofi -show run -display-run '> ' -display-window ' 🗔 '
3789
3790 ### Output configuration
3791 #
3792 # Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/)
3793 output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
3794 #
3795 # Example configuration:
3796 #
3797 #   output HDMI-A-1 resolution 1920x1080 position 1920,0
3798 #
3799 # You can get the names of your outputs by running: swaymsg -t get_outputs
3800
3801 ### Idle configuration
3802
3803 exec swayidle \
3804    timeout 120 swaylock \
3805    timeout 180 'swaymsg "output * dpms off"' \
3806       resume   'swaymsg "output * dpms on"'  \
3807    before-sleep swaylock
3808
3809 ### Input configuration
3810
3811 input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
3812     dwt enabled
3813     tap enabled
3814     natural_scroll enabled
3815     middle_emulation enabled
3816     click_method clickfinger
3817 }
3818
3819 input "2:7:SynPS/2_Synaptics_TouchPad" {
3820     events disabled
3821     dwt enabled
3822     tap enabled
3823     natural_scroll enabled
3824     click_method clickfinger
3825 }
3826
3827 input "1:1:AT_Translated_Set_2_keyboard" {
3828     repeat_delay 200
3829     repeat_rate 45
3830     xkb_layout us,ir
3831     xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
3832 }
3833
3834
3835 ### Key bindings
3836 #
3837 # Basics:
3838 #
3839     # start a terminal
3840     bindsym $mod+Return exec $term
3841
3842     # kill focused window
3843     bindsym $mod+Shift+q kill
3844
3845     # start your launcher
3846     bindsym $mod+d exec $menu
3847
3848     # password manager
3849     bindsym $mod2+space exec rofi-pass
3850
3851     # Drag floating windows by holding down $mod and left mouse button.
3852     # Resize them with right mouse button + $mod.
3853     # Despite the name, also works for non-floating windows.
3854     # Change normal to inverse to use left mouse button for resizing and right
3855     # mouse button for dragging.
3856     floating_modifier $mod normal
3857
3858     # reload the configuration file
3859     bindsym $mod+Shift+c reload
3860
3861     # exit sway (logs you out of your wayland session)
3862     bindsym $mod+Shift+e exit
3863
3864     bindsym $mod+apostrophe exec rofi-light        # rofi-based brightness chooser
3865     bindsym XF86MonBrightnessUp exec light -A 5    # increase screen brightness
3866     bindsym XF86MonBrightnessDown exec light -U 5  # decrease screen brightness
3867
3868     bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
3869     bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
3870     bindsym XF86AudioMute exec pamixer --toggle-mute
3871     bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
3872
3873     # original sway workspace switch and window move
3874     bindsym $mod+bracketleft workspace prev
3875     bindsym $mod+bracketright workspace next
3876     bindsym $mod+braceleft move container to workspace prev
3877     bindsym $mod+braceright move container to workspace next
3878
3879     # bspwm-esque workspace switch and window move
3880     bindsym $mod2+bracketleft exec sway-ws-util switch prev
3881     bindsym $mod2+bracketright exec sway-ws-util switch next
3882     bindsym $mod2+braceleft exec sway-ws-util move prev follow
3883     bindsym $mod2+braceright exec sway-ws-util move next follow
3884 #
3885 # Moving around:
3886 #
3887     # Move your focus around
3888     bindsym $mod+$left focus left
3889     bindsym $mod+$down focus down
3890     bindsym $mod+$up focus up
3891     bindsym $mod+$right focus right
3892     # or use $mod+[up|down|left|right]
3893     bindsym $mod+Left focus left
3894     bindsym $mod+Down focus down
3895     bindsym $mod+Up focus up
3896     bindsym $mod+Right focus right
3897
3898     # _move_ the focused window with the same, but add Shift
3899     bindsym $mod+Shift+$left move left
3900     bindsym $mod+Shift+$down move down
3901     bindsym $mod+Shift+$up move up
3902     bindsym $mod+Shift+$right move right
3903     # ditto, with arrow keys
3904     bindsym $mod+Shift+Left move left
3905     bindsym $mod+Shift+Down move down
3906     bindsym $mod+Shift+Up move up
3907     bindsym $mod+Shift+Right move right
3908 #
3909 # Workspaces:
3910 #
3911     # switch to workspace
3912     bindsym $mod+1 workspace 1
3913     bindsym $mod+2 workspace 2
3914     bindsym $mod+3 workspace 3
3915     bindsym $mod+4 workspace 4
3916     bindsym $mod+5 workspace 5
3917     bindsym $mod+6 workspace 6
3918     bindsym $mod+7 workspace 7
3919     bindsym $mod+8 workspace 8
3920     bindsym $mod+9 workspace 9
3921     bindsym $mod+0 workspace 10
3922     # move focused container to workspace
3923     bindsym $mod+Shift+1 move container to workspace 1
3924     bindsym $mod+Shift+2 move container to workspace 2
3925     bindsym $mod+Shift+3 move container to workspace 3
3926     bindsym $mod+Shift+4 move container to workspace 4
3927     bindsym $mod+Shift+5 move container to workspace 5
3928     bindsym $mod+Shift+6 move container to workspace 6
3929     bindsym $mod+Shift+7 move container to workspace 7
3930     bindsym $mod+Shift+8 move container to workspace 8
3931     bindsym $mod+Shift+9 move container to workspace 9
3932     bindsym $mod+Shift+0 move container to workspace 10
3933     # Note: workspaces can have any name you want, not just numbers.
3934     # We just use 1-10 as the default.
3935 #
3936 # Layout stuff:
3937 #
3938     # You can "split" the current object of your focus with
3939     # $mod+b or $mod+v, for horizontal and vertical splits
3940     # respectively.
3941     bindsym $mod+b splith
3942     bindsym $mod+v splitv
3943
3944     # Switch the current container between different layout styles
3945     bindsym $mod+s layout stacking
3946     bindsym $mod+w layout tabbed
3947     bindsym $mod+e layout toggle split
3948
3949     # Make the current focus fullscreen
3950     bindsym $mod+f fullscreen
3951
3952     # Toggle the current focus between tiling and floating mode
3953     bindsym $mod+Shift+space floating toggle
3954
3955     # Swap focus between the tiling area and the floating area
3956     bindsym $mod+space focus mode_toggle
3957
3958     # move focus to the parent container
3959     bindsym $mod+a focus parent
3960 #
3961 # Scratchpad:
3962 #
3963     # Sway has a "scratchpad", which is a bag of holding for windows.
3964     # You can send windows there and get them back later.
3965
3966     # Move the currently focused window to the scratchpad
3967     bindsym $mod+Shift+minus move scratchpad
3968
3969     # Show the next scratchpad window or hide the focused scratchpad window.
3970     # If there are multiple scratchpad windows, this command cycles through them.
3971     bindsym $mod+minus scratchpad show
3972 #
3973 # Resizing containers:
3974 #
3975 mode "resize" {
3976     # left will shrink the containers width
3977     # right will grow the containers width
3978     # up will shrink the containers height
3979     # down will grow the containers height
3980     bindsym $left resize shrink width 10px
3981     bindsym $down resize grow height 10px
3982     bindsym $up resize shrink height 10px
3983     bindsym $right resize grow width 10px
3984
3985     # ditto, with arrow keys
3986     bindsym Left resize shrink width 10px
3987     bindsym Down resize grow height 10px
3988     bindsym Up resize shrink height 10px
3989     bindsym Right resize grow width 10px
3990
3991     # return to default mode
3992     bindsym Return mode "default"
3993     bindsym Escape mode "default"
3994 }
3995 bindsym $mod+Shift+r mode "resize"
3996
3997 #
3998 # Power button
3999 #
4000 set $locker swaylock && sleep 1
4001
4002 set $mode_system System (l)ock, (e)xit sway, (s)uspend, (h)ibernate, (r)eboot, (S)hutdown
4003 mode "$mode_system" {
4004     bindsym l       exec $locker,                          mode "default"
4005     bindsym e       exec swaymsg exit,                     mode "default"
4006     bindsym s       exec $locker && systemctl suspend,     mode "default"
4007     bindsym h       exec $locker && systemctl hibernate,   mode "default"
4008     bindsym r       exec            systemctl reboot,      mode "default"
4009     bindsym Shift+s exec            systemctl poweroff -i, mode "default"
4010
4011     # back to normal: Enter, Escape, or q
4012     bindsym Return mode "default"
4013     bindsym Escape mode "default"
4014     bindsym q      mode "default"
4015 }
4016 bindsym XF86PowerOff mode "$mode_system"
4017
4018 #
4019 # Status Bar:
4020 #
4021 # Read `man 5 sway-bar` for more information about this section.
4022 bar {
4023     position bottom
4024     colors {
4025         statusline #ffffff
4026         background #323232
4027         inactive_workspace #32323200 #32323200 #5c5c5c
4028     }
4029     status_command i3status
4030 }
4031
4032 # font pango: benis uushi 9
4033 font pango: Ubuntu Mono 11
4034
4035 include /etc/sway/config.d/*
4036 #+end_src
4037
4038 ** swaylock
4039 :PROPERTIES:
4040 :header-args+: :tangle ~/.config/swaylock/config
4041 :END:
4042
4043 #+begin_src conf
4044 image=/home/amin/usr/pics/wp/wp2445784-blurred-wallpapers.jpg
4045 scaling=fill
4046 #+end_src
4047
4048 ** TLP
4049
4050 *** langa
4051
4052 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "langa")) "/sudo::/etc/default/tlp")
4053 # ------------------------------------------------------------------------------
4054 # tlp - Parameters for power saving
4055 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
4056
4057 # Hint: some features are disabled by default, remove the leading # to enable
4058 # them.
4059
4060 # Set to 0 to disable, 1 to enable TLP.
4061 TLP_ENABLE=1
4062
4063 # Operation mode when no power supply can be detected: AC, BAT.
4064 # Concerns some desktop and embedded hardware only.
4065 TLP_DEFAULT_MODE=AC
4066
4067 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
4068 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
4069 TLP_PERSISTENT_DEFAULT=0
4070
4071 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
4072 # Non-zero value enables, zero disables laptop mode.
4073 DISK_IDLE_SECS_ON_AC=0
4074 DISK_IDLE_SECS_ON_BAT=2
4075
4076 # Dirty page values (timeouts in secs).
4077 MAX_LOST_WORK_SECS_ON_AC=15
4078 MAX_LOST_WORK_SECS_ON_BAT=60
4079
4080 # Hint: CPU parameters below are disabled by default, remove the leading #
4081 # to enable them, otherwise kernel default values are used.
4082
4083 # Select a CPU frequency scaling governor.
4084 # Intel Core i processor with intel_pstate driver:
4085 #   powersave(*), performance.
4086 # Older hardware with acpi-cpufreq driver:
4087 #   ondemand(*), powersave, performance, conservative, schedutil.
4088 # (*) is recommended.
4089 # Hint: use tlp-stat -p to show the active driver and available governors.
4090 # Important:
4091 #   powersave for intel_pstate and ondemand for acpi-cpufreq are power
4092 #   efficient for *almost all* workloads and therefore kernel and most
4093 #   distributions have chosen them as defaults. If you still want to change,
4094 #   you should know what you're doing! You *must* disable your distribution's
4095 #   governor settings or conflicts will occur.
4096 #CPU_SCALING_GOVERNOR_ON_AC=powersave
4097 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
4098
4099 # Set the min/max frequency available for the scaling governor.
4100 # Possible values strongly depend on your CPU. For available frequencies see
4101 # the output of tlp-stat -p.
4102 #CPU_SCALING_MIN_FREQ_ON_AC=0
4103 #CPU_SCALING_MAX_FREQ_ON_AC=0
4104 #CPU_SCALING_MIN_FREQ_ON_BAT=0
4105 #CPU_SCALING_MAX_FREQ_ON_BAT=0
4106
4107 # Set energy performance hints (HWP) for Intel P-state governor:
4108 #   performance, balance_performance, default, balance_power, power
4109 # Values are given in order of increasing power saving.
4110 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
4111 CPU_HWP_ON_AC=balance_performance
4112 CPU_HWP_ON_BAT=balance_power
4113
4114 # Set Intel P-state performance: 0..100 (%).
4115 # Limit the max/min P-state to control the power dissipation of the CPU.
4116 # Values are stated as a percentage of the available performance.
4117 # Requires an Intel Core i processor with intel_pstate driver.
4118 #CPU_MIN_PERF_ON_AC=0
4119 #CPU_MAX_PERF_ON_AC=100
4120 #CPU_MIN_PERF_ON_BAT=0
4121 #CPU_MAX_PERF_ON_BAT=30
4122
4123 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
4124 # Requires an Intel Core i processor.
4125 # Important:
4126 # - This may conflict with your distribution's governor settings
4127 # - A value of 1 does *not* activate boosting, it just allows it
4128 #CPU_BOOST_ON_AC=1
4129 #CPU_BOOST_ON_BAT=0
4130
4131 # Minimize number of used CPU cores/hyper-threads under light load conditions:
4132 #   0=disable, 1=enable.
4133 SCHED_POWERSAVE_ON_AC=0
4134 SCHED_POWERSAVE_ON_BAT=1
4135
4136 # Kernel NMI Watchdog:
4137 #   0=disable (default, saves power), 1=enable (for kernel debugging only).
4138 NMI_WATCHDOG=0
4139
4140 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
4141 # Frequency voltage pairs are written to:
4142 #   /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
4143 # CAUTION: only use this, if you thoroughly understand what you are doing!
4144 #PHC_CONTROLS="F:V F:V F:V F:V"
4145
4146 # Set CPU performance versus energy savings policy:
4147 #   performance, balance-performance, default, balance-power, power.
4148 # Values are given in order of increasing power saving.
4149 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
4150 ENERGY_PERF_POLICY_ON_AC=performance
4151 ENERGY_PERF_POLICY_ON_BAT=balance-power
4152
4153 # Disk devices; separate multiple devices with spaces (default: sda).
4154 # Devices can be specified by disk ID also (lookup with: tlp diskid).
4155 DISK_DEVICES="sda sdb"
4156
4157 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
4158 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
4159 # Separate values for multiple disks with spaces. Use the special value 'keep'
4160 # to keep the hardware default for the particular disk.
4161 DISK_APM_LEVEL_ON_AC="254 254"
4162 DISK_APM_LEVEL_ON_BAT="128 128"
4163
4164 # Hard disk spin down timeout:
4165 #   0:        spin down disabled
4166 #   1..240:   timeouts from 5s to 20min (in units of 5s)
4167 #   241..251: timeouts from 30min to 5.5 hours (in units of 30min)
4168 # See 'man hdparm' for details.
4169 # Separate values for multiple disks with spaces. Use the special value 'keep'
4170 # to keep the hardware default for the particular disk.
4171 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
4172 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
4173
4174 # Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
4175 # Separate values for multiple disks with spaces. Use the special value 'keep'
4176 # to keep the kernel default scheduler for the particular disk.
4177 #DISK_IOSCHED="cfq cfq"
4178
4179 # AHCI link power management (ALPM) for disk devices:
4180 #   min_power, med_power_with_dipm(*), medium_power, max_performance.
4181 # (*) Kernel >= 4.15 required, then recommended.
4182 # Multiple values separated with spaces are tried sequentially until success.
4183 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
4184 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
4185
4186 # Exclude host devices from AHCI link power management.
4187 # Separate multiple hosts with spaces.
4188 #SATA_LINKPWR_BLACKLIST="host1"
4189
4190 # Runtime Power Management for AHCI host and disks devices:
4191 #   on=disable, auto=enable.
4192 # EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
4193 #AHCI_RUNTIME_PM_ON_AC=on
4194 #AHCI_RUNTIME_PM_ON_BAT=on
4195
4196 # Seconds of inactivity before disk is suspended.
4197 AHCI_RUNTIME_PM_TIMEOUT=15
4198
4199 # PCI Express Active State Power Management (PCIe ASPM):
4200 #   default, performance, powersave.
4201 PCIE_ASPM_ON_AC=performance
4202 PCIE_ASPM_ON_BAT=powersave
4203
4204 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
4205 # auto = mid on BAT, high on AC; default = use hardware defaults.
4206 RADEON_POWER_PROFILE_ON_AC=high
4207 RADEON_POWER_PROFILE_ON_BAT=low
4208
4209 # Radeon dynamic power management method (DPM): battery, performance.
4210 RADEON_DPM_STATE_ON_AC=performance
4211 RADEON_DPM_STATE_ON_BAT=battery
4212
4213 # Radeon DPM performance level: auto, low, high; auto is recommended.
4214 RADEON_DPM_PERF_LEVEL_ON_AC=auto
4215 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4216
4217 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4218 WIFI_PWR_ON_AC=off
4219 WIFI_PWR_ON_BAT=on
4220
4221 # Disable wake on LAN: Y/N.
4222 WOL_DISABLE=Y
4223
4224 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4225 # A value of 0 disables, >=1 enables power saving (recommended: 1).
4226 SOUND_POWER_SAVE_ON_AC=0
4227 SOUND_POWER_SAVE_ON_BAT=0
4228
4229 # Disable controller too (HDA only): Y/N.
4230 SOUND_POWER_SAVE_CONTROLLER=N
4231
4232 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4233 # Drive can be powered on again by releasing (and reinserting) the eject lever
4234 # or by pressing the disc eject button on newer models.
4235 # Note: an UltraBay/MediaBay hard disk is never powered off.
4236 BAY_POWEROFF_ON_AC=0
4237 BAY_POWEROFF_ON_BAT=0
4238 # Optical drive device to power off (default sr0).
4239 BAY_DEVICE="sr0"
4240
4241 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4242 RUNTIME_PM_ON_AC=on
4243 RUNTIME_PM_ON_BAT=auto
4244
4245 # Exclude PCI(e) device adresses the following list from Runtime PM
4246 # (separate with spaces). Use lspci to get the adresses (1st column).
4247 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4248
4249 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4250 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4251 # prevents accidential power-on of dGPU in hybrid graphics setups.
4252 # Use "" to disable the feature completely.
4253 # Separate multiple drivers with spaces.
4254 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4255
4256 # Set to 0 to disable, 1 to enable USB autosuspend feature.
4257 USB_AUTOSUSPEND=1
4258
4259 # Exclude listed devices from USB autosuspend (separate with spaces).
4260 # Use lsusb to get the ids.
4261 # Note: input devices (usbhid) are excluded automatically
4262 #USB_BLACKLIST="1111:2222 3333:4444"
4263
4264 # Bluetooth devices are excluded from USB autosuspend:
4265 #   0=do not exclude, 1=exclude.
4266 USB_BLACKLIST_BTUSB=0
4267
4268 # Phone devices are excluded from USB autosuspend:
4269 #   0=do not exclude, 1=exclude (enable charging).
4270 USB_BLACKLIST_PHONE=0
4271
4272 # Printers are excluded from USB autosuspend:
4273 #   0=do not exclude, 1=exclude.
4274 USB_BLACKLIST_PRINTER=1
4275
4276 # WWAN devices are excluded from USB autosuspend:
4277 #   0=do not exclude, 1=exclude.
4278 USB_BLACKLIST_WWAN=1
4279
4280 # Include listed devices into USB autosuspend even if already excluded
4281 # by the blacklists above (separate with spaces).
4282 # Use lsusb to get the ids.
4283 #USB_WHITELIST="1111:2222 3333:4444"
4284
4285 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4286 # (workaround for USB devices that cause shutdown problems).
4287 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4288
4289 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4290 # on system startup: 0=disable, 1=enable.
4291 # Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4292 #   are ignored when this is enabled!
4293 #RESTORE_DEVICE_STATE_ON_STARTUP=0
4294 RESTORE_DEVICE_STATE_ON_STARTUP=0
4295
4296 # Radio devices to disable on startup: bluetooth, wifi, wwan.
4297 # Separate multiple devices with spaces.
4298 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
4299 DEVICES_TO_DISABLE_ON_STARTUP="bluetooth"
4300
4301 # Radio devices to enable on startup: bluetooth, wifi, wwan.
4302 # Separate multiple devices with spaces.
4303 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4304
4305 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4306 # (workaround for devices that are blocking shutdown).
4307 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4308
4309 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4310 # (to prevent other operating systems from missing radios).
4311 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4312
4313 # Radio devices to enable on AC: bluetooth, wifi, wwan.
4314 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4315
4316 # Radio devices to disable on battery: bluetooth, wifi, wwan.
4317 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4318
4319 # Radio devices to disable on battery when not in use (not connected):
4320 #   bluetooth, wifi, wwan.
4321 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4322
4323 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4324 # required). Charging starts when the remaining capacity falls below the
4325 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4326 # Main / Internal battery (values in %)
4327 #START_CHARGE_THRESH_BAT0=75
4328 #STOP_CHARGE_THRESH_BAT0=80
4329 # Ultrabay / Slice / Replaceable battery (values in %)
4330 #START_CHARGE_THRESH_BAT1=75
4331 #STOP_CHARGE_THRESH_BAT1=80
4332
4333 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4334 #RESTORE_THRESHOLDS_ON_BAT=1
4335
4336 # ------------------------------------------------------------------------------
4337 # tlp-rdw - Parameters for the radio device wizard
4338 # Possible devices: bluetooth, wifi, wwan.
4339
4340 # Hints:
4341 # - Parameters are disabled by default, remove the leading # to enable them
4342 # - Separate multiple radio devices with spaces
4343
4344 # Radio devices to disable on connect.
4345 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4346 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4347 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4348
4349 # Radio devices to enable on disconnect.
4350 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4351 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4352 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4353
4354 # Radio devices to enable/disable when docked.
4355 #DEVICES_TO_ENABLE_ON_DOCK=""
4356 #DEVICES_TO_DISABLE_ON_DOCK=""
4357
4358 # Radio devices to enable/disable when undocked.
4359 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4360 #DEVICES_TO_DISABLE_ON_UNDOCK=""
4361 #+end_src
4362
4363 *** pary
4364
4365 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "pary")) "/sudo::/etc/default/tlp")
4366 # ------------------------------------------------------------------------------
4367 # tlp - Parameters for power saving
4368 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
4369
4370 # Hint: some features are disabled by default, remove the leading # to enable
4371 # them.
4372
4373 # Set to 0 to disable, 1 to enable TLP.
4374 TLP_ENABLE=1
4375
4376 # Operation mode when no power supply can be detected: AC, BAT.
4377 # Concerns some desktop and embedded hardware only.
4378 TLP_DEFAULT_MODE=AC
4379
4380 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
4381 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
4382 TLP_PERSISTENT_DEFAULT=0
4383
4384 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
4385 # Non-zero value enables, zero disables laptop mode.
4386 DISK_IDLE_SECS_ON_AC=0
4387 DISK_IDLE_SECS_ON_BAT=2
4388
4389 # Dirty page values (timeouts in secs).
4390 MAX_LOST_WORK_SECS_ON_AC=15
4391 MAX_LOST_WORK_SECS_ON_BAT=60
4392
4393 # Hint: CPU parameters below are disabled by default, remove the leading #
4394 # to enable them, otherwise kernel default values are used.
4395
4396 # Select a CPU frequency scaling governor.
4397 # Intel Core i processor with intel_pstate driver:
4398 #   powersave(*), performance.
4399 # Older hardware with acpi-cpufreq driver:
4400 #   ondemand(*), powersave, performance, conservative, schedutil.
4401 # (*) is recommended.
4402 # Hint: use tlp-stat -p to show the active driver and available governors.
4403 # Important:
4404 #   powersave for intel_pstate and ondemand for acpi-cpufreq are power
4405 #   efficient for *almost all* workloads and therefore kernel and most
4406 #   distributions have chosen them as defaults. If you still want to change,
4407 #   you should know what you're doing! You *must* disable your distribution's
4408 #   governor settings or conflicts will occur.
4409 #CPU_SCALING_GOVERNOR_ON_AC=powersave
4410 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
4411
4412 # Set the min/max frequency available for the scaling governor.
4413 # Possible values strongly depend on your CPU. For available frequencies see
4414 # the output of tlp-stat -p.
4415 #CPU_SCALING_MIN_FREQ_ON_AC=0
4416 #CPU_SCALING_MAX_FREQ_ON_AC=0
4417 #CPU_SCALING_MIN_FREQ_ON_BAT=0
4418 #CPU_SCALING_MAX_FREQ_ON_BAT=0
4419
4420 # Set energy performance hints (HWP) for Intel P-state governor:
4421 #   performance, balance_performance, default, balance_power, power
4422 # Values are given in order of increasing power saving.
4423 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
4424 CPU_HWP_ON_AC=balance_performance
4425 CPU_HWP_ON_BAT=balance_power
4426
4427 # Set Intel P-state performance: 0..100 (%).
4428 # Limit the max/min P-state to control the power dissipation of the CPU.
4429 # Values are stated as a percentage of the available performance.
4430 # Requires an Intel Core i processor with intel_pstate driver.
4431 #CPU_MIN_PERF_ON_AC=0
4432 #CPU_MAX_PERF_ON_AC=100
4433 #CPU_MIN_PERF_ON_BAT=0
4434 #CPU_MAX_PERF_ON_BAT=30
4435
4436 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
4437 # Requires an Intel Core i processor.
4438 # Important:
4439 # - This may conflict with your distribution's governor settings
4440 # - A value of 1 does *not* activate boosting, it just allows it
4441 #CPU_BOOST_ON_AC=1
4442 #CPU_BOOST_ON_BAT=0
4443
4444 # Minimize number of used CPU cores/hyper-threads under light load conditions:
4445 #   0=disable, 1=enable.
4446 SCHED_POWERSAVE_ON_AC=0
4447 SCHED_POWERSAVE_ON_BAT=1
4448
4449 # Kernel NMI Watchdog:
4450 #   0=disable (default, saves power), 1=enable (for kernel debugging only).
4451 NMI_WATCHDOG=0
4452
4453 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
4454 # Frequency voltage pairs are written to:
4455 #   /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
4456 # CAUTION: only use this, if you thoroughly understand what you are doing!
4457 #PHC_CONTROLS="F:V F:V F:V F:V"
4458
4459 # Set CPU performance versus energy savings policy:
4460 #   performance, balance-performance, default, balance-power, power.
4461 # Values are given in order of increasing power saving.
4462 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
4463 ENERGY_PERF_POLICY_ON_AC=performance
4464 ENERGY_PERF_POLICY_ON_BAT=balance-power
4465
4466 # Disk devices; separate multiple devices with spaces (default: sda).
4467 # Devices can be specified by disk ID also (lookup with: tlp diskid).
4468 DISK_DEVICES="sda sdb"
4469
4470 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
4471 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
4472 # Separate values for multiple disks with spaces. Use the special value 'keep'
4473 # to keep the hardware default for the particular disk.
4474 DISK_APM_LEVEL_ON_AC="254 254"
4475 DISK_APM_LEVEL_ON_BAT="128 128"
4476
4477 # Hard disk spin down timeout:
4478 #   0:        spin down disabled
4479 #   1..240:   timeouts from 5s to 20min (in units of 5s)
4480 #   241..251: timeouts from 30min to 5.5 hours (in units of 30min)
4481 # See 'man hdparm' for details.
4482 # Separate values for multiple disks with spaces. Use the special value 'keep'
4483 # to keep the hardware default for the particular disk.
4484 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
4485 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
4486
4487 # Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
4488 # Separate values for multiple disks with spaces. Use the special value 'keep'
4489 # to keep the kernel default scheduler for the particular disk.
4490 #DISK_IOSCHED="cfq cfq"
4491
4492 # AHCI link power management (ALPM) for disk devices:
4493 #   min_power, med_power_with_dipm(*), medium_power, max_performance.
4494 # (*) Kernel >= 4.15 required, then recommended.
4495 # Multiple values separated with spaces are tried sequentially until success.
4496 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
4497 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
4498
4499 # Exclude host devices from AHCI link power management.
4500 # Separate multiple hosts with spaces.
4501 #SATA_LINKPWR_BLACKLIST="host1"
4502
4503 # Runtime Power Management for AHCI host and disks devices:
4504 #   on=disable, auto=enable.
4505 # EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
4506 #AHCI_RUNTIME_PM_ON_AC=on
4507 #AHCI_RUNTIME_PM_ON_BAT=on
4508
4509 # Seconds of inactivity before disk is suspended.
4510 AHCI_RUNTIME_PM_TIMEOUT=15
4511
4512 # PCI Express Active State Power Management (PCIe ASPM):
4513 #   default, performance, powersave.
4514 PCIE_ASPM_ON_AC=performance
4515 PCIE_ASPM_ON_BAT=powersave
4516
4517 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
4518 # auto = mid on BAT, high on AC; default = use hardware defaults.
4519 RADEON_POWER_PROFILE_ON_AC=high
4520 RADEON_POWER_PROFILE_ON_BAT=low
4521
4522 # Radeon dynamic power management method (DPM): battery, performance.
4523 RADEON_DPM_STATE_ON_AC=performance
4524 RADEON_DPM_STATE_ON_BAT=battery
4525
4526 # Radeon DPM performance level: auto, low, high; auto is recommended.
4527 RADEON_DPM_PERF_LEVEL_ON_AC=auto
4528 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4529
4530 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4531 WIFI_PWR_ON_AC=off
4532 WIFI_PWR_ON_BAT=on
4533
4534 # Disable wake on LAN: Y/N.
4535 WOL_DISABLE=Y
4536
4537 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4538 # A value of 0 disables, >=1 enables power saving (recommended: 1).
4539 SOUND_POWER_SAVE_ON_AC=0
4540 SOUND_POWER_SAVE_ON_BAT=0
4541
4542 # Disable controller too (HDA only): Y/N.
4543 SOUND_POWER_SAVE_CONTROLLER=N
4544
4545 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4546 # Drive can be powered on again by releasing (and reinserting) the eject lever
4547 # or by pressing the disc eject button on newer models.
4548 # Note: an UltraBay/MediaBay hard disk is never powered off.
4549 BAY_POWEROFF_ON_AC=0
4550 BAY_POWEROFF_ON_BAT=0
4551 # Optical drive device to power off (default sr0).
4552 BAY_DEVICE="sr0"
4553
4554 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4555 RUNTIME_PM_ON_AC=on
4556 RUNTIME_PM_ON_BAT=auto
4557
4558 # Exclude PCI(e) device adresses the following list from Runtime PM
4559 # (separate with spaces). Use lspci to get the adresses (1st column).
4560 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4561 RUNTIME_PM_BLACKLIST="01:00.0"
4562
4563 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4564 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4565 # prevents accidential power-on of dGPU in hybrid graphics setups.
4566 # Use "" to disable the feature completely.
4567 # Separate multiple drivers with spaces.
4568 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4569
4570 # Set to 0 to disable, 1 to enable USB autosuspend feature.
4571 USB_AUTOSUSPEND=1
4572
4573 # Exclude listed devices from USB autosuspend (separate with spaces).
4574 # Use lsusb to get the ids.
4575 # Note: input devices (usbhid) are excluded automatically
4576 #USB_BLACKLIST="1111:2222 3333:4444"
4577
4578 # Bluetooth devices are excluded from USB autosuspend:
4579 #   0=do not exclude, 1=exclude.
4580 USB_BLACKLIST_BTUSB=0
4581
4582 # Phone devices are excluded from USB autosuspend:
4583 #   0=do not exclude, 1=exclude (enable charging).
4584 USB_BLACKLIST_PHONE=0
4585
4586 # Printers are excluded from USB autosuspend:
4587 #   0=do not exclude, 1=exclude.
4588 USB_BLACKLIST_PRINTER=1
4589
4590 # WWAN devices are excluded from USB autosuspend:
4591 #   0=do not exclude, 1=exclude.
4592 USB_BLACKLIST_WWAN=1
4593
4594 # Include listed devices into USB autosuspend even if already excluded
4595 # by the blacklists above (separate with spaces).
4596 # Use lsusb to get the ids.
4597 #USB_WHITELIST="1111:2222 3333:4444"
4598
4599 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4600 # (workaround for USB devices that cause shutdown problems).
4601 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4602
4603 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4604 # on system startup: 0=disable, 1=enable.
4605 # Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4606 #   are ignored when this is enabled!
4607 #RESTORE_DEVICE_STATE_ON_STARTUP=0
4608 RESTORE_DEVICE_STATE_ON_STARTUP=1
4609
4610 # Radio devices to disable on startup: bluetooth, wifi, wwan.
4611 # Separate multiple devices with spaces.
4612 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
4613
4614 # Radio devices to enable on startup: bluetooth, wifi, wwan.
4615 # Separate multiple devices with spaces.
4616 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4617
4618 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4619 # (workaround for devices that are blocking shutdown).
4620 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4621
4622 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4623 # (to prevent other operating systems from missing radios).
4624 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4625
4626 # Radio devices to enable on AC: bluetooth, wifi, wwan.
4627 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4628
4629 # Radio devices to disable on battery: bluetooth, wifi, wwan.
4630 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4631
4632 # Radio devices to disable on battery when not in use (not connected):
4633 #   bluetooth, wifi, wwan.
4634 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4635
4636 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4637 # required). Charging starts when the remaining capacity falls below the
4638 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4639 # Main / Internal battery (values in %)
4640 #START_CHARGE_THRESH_BAT0=75
4641 #STOP_CHARGE_THRESH_BAT0=80
4642 # Ultrabay / Slice / Replaceable battery (values in %)
4643 #START_CHARGE_THRESH_BAT1=75
4644 #STOP_CHARGE_THRESH_BAT1=80
4645
4646 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4647 #RESTORE_THRESHOLDS_ON_BAT=1
4648
4649 # ------------------------------------------------------------------------------
4650 # tlp-rdw - Parameters for the radio device wizard
4651 # Possible devices: bluetooth, wifi, wwan.
4652
4653 # Hints:
4654 # - Parameters are disabled by default, remove the leading # to enable them
4655 # - Separate multiple radio devices with spaces
4656
4657 # Radio devices to disable on connect.
4658 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4659 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4660 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4661
4662 # Radio devices to enable on disconnect.
4663 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4664 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4665 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4666
4667 # Radio devices to enable/disable when docked.
4668 #DEVICES_TO_ENABLE_ON_DOCK=""
4669 #DEVICES_TO_DISABLE_ON_DOCK=""
4670
4671 # Radio devices to enable/disable when undocked.
4672 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4673 #DEVICES_TO_DISABLE_ON_UNDOCK=""
4674 #+end_src
4675
4676 ** X
4677
4678 *** xprofile
4679 :PROPERTIES:
4680 :header-args+: :tangle ~/.xprofile
4681 :END:
4682
4683 =~/.xprofile= is similar in style to =~/.xinitrc=, but on the
4684 contrary, it's automatically sourced by LightDM, my display manager of
4685 choice.
4686
4687 #+begin_src sh :tangle no
4688 xset -b  # disable bell
4689 xset r rate 200 45  # repeat delay (ms) and rate (repeats/sec)
4690
4691 # setxkbmap -option compose:ralt
4692
4693 setxkbmap -option ctrl:nocaps          # turn capslock into control
4694 setxkbmap -option altwin:swap_alt_win  # swap alt and super
4695
4696 if [ $(hostname) = "plasma" ]
4697 then
4698     setxkbmap -option ctrl:rctrl_ralt  # turn right control into right alt
4699 fi
4700
4701 if [ $(hostname) = "enigma" ]
4702 then
4703     xmodmap -e "keycode 135 = Alt_R"  # remap menu key to alt
4704 fi
4705
4706 light -Scrs "intel_backlight" 2
4707
4708 source $HOME/.zprofile
4709
4710 export _JAVA_AWT_WM_NONREPARENTING=1
4711 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4712
4713 if [ $(hostname) = "plasma" ]
4714 then
4715     unlock-def-gk.py &
4716 fi
4717
4718 bspwm &
4719 #+end_src
4720
4721 *** X resources
4722
4723 **** Xresources
4724 :PROPERTIES:
4725 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
4726 :END:
4727
4728 #+begin_src conf-xdefaults
4729 #include ".Xresources.d/fonts"
4730 ! #include ".Xresources.d/colors"
4731 #include ".Xresources.d/emacs"
4732 #include ".Xresources.d/rxvt-unicode"
4733 #+end_src
4734
4735 **** Xresources.d
4736
4737 ***** fonts
4738 :PROPERTIES:
4739 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
4740 :END:
4741
4742 #+begin_src conf-xdefaults
4743 Xft.lcdfilter: lcddefault
4744 Xft.antialias: true
4745 Xft.autohint: 0
4746 Xft.hinting: true
4747 Xft.hintstyle: hintslight
4748 ! Xft.hintstyle: hintfull
4749 Xft.rgba: rgb
4750 Xft.dpi: 96
4751 #+end_src
4752
4753 ***** colors
4754 :PROPERTIES:
4755 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
4756 :END:
4757
4758 #+begin_src conf-xdefaults :tangle no
4759 #include "gruvbox-light.xresources"
4760 ! #include "gruvbox-dark.xresources"
4761 #include "gruvbox-urxvt256.xresources"
4762 #+end_src
4763
4764 #+begin_src conf-xdefaults :tangle no
4765 ! -----------------------------------------------------------------------------
4766 ! File: gruvbox-light.xresources
4767 ! Description: Retro groove colorscheme generalized
4768 ! Author: morhetz <morhetz@gmail.com>
4769 ! Source: https://github.com/morhetz/gruvbox-generalized
4770 ! Last Modified: 6 Sep 2014
4771 ! -----------------------------------------------------------------------------
4772
4773 ! hard contrast: *background: #f9f5d7
4774 *background: #fbf1c7
4775 ! soft contrast: *background: #f2e5bc
4776 *foreground: #3c3836
4777 ! Black + DarkGrey
4778 *color0:  #fdf4c1
4779 *color8:  #928374
4780 ! DarkRed + Red
4781 *color1:  #cc241d
4782 *color9:  #9d0006
4783 ! DarkGreen + Green
4784 *color2:  #98971a
4785 *color10: #79740e
4786 ! DarkYellow + Yellow
4787 *color3:  #d79921
4788 *color11: #b57614
4789 ! DarkBlue + Blue
4790 *color4:  #458588
4791 *color12: #076678
4792 ! DarkMagenta + Magenta
4793 *color5:  #b16286
4794 *color13: #8f3f71
4795 ! DarkCyan + Cyan
4796 *color6:  #689d6a
4797 *color14: #427b58
4798 ! LightGrey + White
4799 *color7:  #7c6f64
4800 *color15: #3c3836
4801 #+end_src
4802
4803 #+begin_src conf-xdefaults :tangle no
4804 ! -----------------------------------------------------------------------------
4805 ! File: gruvbox-dark.xresources
4806 ! Description: Retro groove colorscheme generalized
4807 ! Author: morhetz <morhetz@gmail.com>
4808 ! Source: https://github.com/morhetz/gruvbox-generalized
4809 ! Last Modified: 6 Sep 2014
4810 ! -----------------------------------------------------------------------------
4811
4812 ! hard contrast: *background: #1d2021
4813 *background: #282828
4814 ! soft contrast: *background: #32302f
4815 *foreground: #ebdbb2
4816 ! Black + DarkGrey
4817 *color0:  #282828
4818 *color8:  #928374
4819 ! DarkRed + Red
4820 *color1:  #cc241d
4821 *color9:  #fb4934
4822 ! DarkGreen + Green
4823 *color2:  #98971a
4824 *color10: #b8bb26
4825 ! DarkYellow + Yellow
4826 *color3:  #d79921
4827 *color11: #fabd2f
4828 ! DarkBlue + Blue
4829 *color4:  #458588
4830 *color12: #83a598
4831 ! DarkMagenta + Magenta
4832 *color5:  #b16286
4833 *color13: #d3869b
4834 ! DarkCyan + Cyan
4835 *color6:  #689d6a
4836 *color14: #8ec07c
4837 ! LightGrey + White
4838 *color7:  #a89984
4839 *color15: #ebdbb2
4840 #+end_src
4841
4842 #+begin_src conf-xdefaults :tangle no
4843 ! -----------------------------------------------------------------------------
4844 ! File: gruvbox-urxvt256.xresources
4845 ! Description: Retro groove colorscheme generalized
4846 ! Author: morhetz <morhetz@gmail.com>
4847 ! Source: https://github.com/morhetz/gruvbox-generalized
4848 ! Last Modified: 13 Dec 2013
4849 ! -----------------------------------------------------------------------------
4850
4851 URxvt.color24:  #076678
4852 URxvt.color66:  #427b58
4853 URxvt.color88:  #9d0006
4854 URxvt.color96:  #8f3f71
4855 URxvt.color100: #79740e
4856 URxvt.color108: #8ec07c
4857 URxvt.color109: #83a598
4858 URxvt.color130: #af3a03
4859 URxvt.color136: #b57614
4860 URxvt.color142: #b8bb26
4861 URxvt.color167: #fb4934
4862 URxvt.color175: #d3869b
4863 URxvt.color208: #fe8019
4864 URxvt.color214: #fabd2f
4865 URxvt.color223: #ebdbb2
4866 URxvt.color228: #f2e5bc
4867 URxvt.color229: #fbf1c7
4868 URxvt.color230: #f9f5d7
4869 URxvt.color234: #1d2021
4870 URxvt.color235: #282828
4871 URxvt.color236: #32302f
4872 URxvt.color237: #3c3836
4873 URxvt.color239: #504945
4874 URxvt.color241: #665c54
4875 URxvt.color243: #7c6f64
4876 URxvt.color244: #928374
4877 URxvt.color245: #928374
4878 URxvt.color246: #a89984
4879 URxvt.color248: #bdae93
4880 URxvt.color250: #d5c4a1
4881 #+end_src
4882
4883 ***** emacs
4884 :PROPERTIES:
4885 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
4886 :END:
4887
4888 #+begin_src conf-xdefaults
4889 Emacs.menuBar: off
4890 Emacs.toolBar: off
4891 Emacs.verticalScrollBars: off
4892 Emacs.cursorBlink: off
4893 Emacs.FontBackend: xft,x
4894 ! Emacs.font: Ubuntu Mono-12
4895 ! Emacs.font: Triplicate T4C-11
4896 ! Emacs.font: Ubuntu Mono-10.5
4897 ! Emacs.font: Ubuntu Mono-12
4898 ! Emacs.font: Iosevka-11
4899
4900 ! Emacs.font: Fira Mono:size=15
4901 ! Emacs.font: DejaVu Sans Mono:size=15
4902 ! Emacs.font: Inconsolata:size=17
4903 ! Emacs.font: Inconsolata:size=16
4904 ! Emacs.font: Inconsolata LGC:size=14
4905 ! Emacs.font: Source Code Pro Medium-10.5
4906 Emacs.font: Ubuntu Mono:size=16
4907 ! Emacs.font: Iosevka:size=16
4908 #+end_src
4909
4910 ***** rxvt-unicode
4911 :PROPERTIES:
4912 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
4913 :END:
4914
4915 #+begin_src conf-xdefaults
4916 ! Font
4917 URxvt.font:             xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
4918 URxvt.boldFont:         xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
4919 URxvt.italicFont:       xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
4920 URxvt.bolditalicFont:   xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
4921
4922 URxvt.xftAntialias:     true
4923 URxvt.letterSpace:      0
4924
4925 URxvt.depth:                0
4926 URxvt.loginShell:           true
4927 URxvt.saveLines:            100000
4928 URxvt.internalBorder:       3
4929 URxvt.lineSpace:            0
4930 URxvt.scrollBar:            false
4931 URxvt.scrollStyle:          rxvt
4932 URxvt*scrollTtyOutput:      false
4933 URxvt*scrollWithBuffer:     true
4934 URxvt*scrollTtyKeypress:    true
4935 URxvt.keysym.Shift-Up:      command:\033]720;1\007
4936 URxvt.keysym.Shift-Down:    command:\033]721;1\007
4937
4938 URxvt.perl-ext-common:      default,clipboard,url-select,keyboard-select
4939 URxvt.perl-ext:             bidi
4940 URxvt.bidi.enabled:         1
4941 URxvt.url-select.launcher:  firefox
4942 URxvt.url-select.underline: true
4943 URxvt.keysym.M-u:           perl:url-select:select_next
4944 URxvt.keysym.M-Escape:      perl:keyboard-select:activate
4945 URxvt.keysym.M-s:           perl:keyboard-select:search
4946 URxvt.url-launcher:         /usr/bin/firefox
4947 URxvt.matcher.button:       1
4948 URxvt.iso14755:             false
4949 URxvt.iso14755_53:          false
4950 URxvt.keysym.M-c:           perl:clipboard:copy
4951 URxvt.keysym.M-v:           perl:clipboard:paste
4952 URxvt.keysym.C-A-V:         perl:clipboard:paste_escaped
4953 URxvt.keysym.C-Up:          font-size:increase
4954 URxvt.keysym.C-Down:        font-size:decrease
4955 URxvt.keysym.C-S-Up:        font-size:incglobal
4956 URxvt.keysym.C-S-Down:      font-size:decglobal
4957 URxvt.keysym.C-equal:       font-size:reset
4958 !URxvt.keysym.C-question:   font-size:show
4959
4960 URxvt.iconFile:             /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
4961
4962 !urxvt*foreground: white
4963 !urxvt*background: black
4964
4965 !*color0:  #2E3436
4966 !*color1:  #a40000
4967 !*color2:  #4E9A06
4968 !*color3:  #C4A000
4969 !*color4:  #3465A4
4970 !*color5:  #75507B
4971 !*color6:  #ce5c00
4972 !*color7:  #babdb9
4973 !*color8:  #555753
4974 !*color9:  #EF2929
4975 !*color10: #8AE234
4976 !*color11: #FCE94F
4977 !*color12: #729FCF
4978 !*color13: #AD7FA8
4979 !*color14: #fcaf3e
4980 !*color15: #EEEEEC
4981
4982 !URxvt.foreground: #C8C8C8
4983 !URxvt.background: #FFFFFF
4984
4985 !! black
4986 !*color0:  #2E3436
4987 !*color8:  #555753
4988 !! red
4989 !*color1:  #a40000
4990 !*color9:  #EF2929
4991 !! green
4992 !*color2:  #4E9A06
4993 !*color10: #8AE234
4994 !! yellow
4995 !*color3:  #C4A000
4996 !*color11: #FCE94F
4997 !! blue
4998 !*color4:  #3465A4
4999 !*color12: #729FCF
5000 !! purple
5001 !*color5:  #75507B
5002 !*color13: #AD7FA8
5003 !! orange (replaces cyan)
5004 !*color6:  #ce5c00
5005 !*color14: #fcaf3e
5006 !! white
5007 !*color7:  #babdb9
5008 !*color15: #EEEEEC
5009
5010 ! Tango colour theme for rxvt-unicode
5011 URxvt.background: #FFFFFF
5012 URxvt.foreground: #000000
5013
5014 ! Black
5015 URxvt.color0: #2E3436
5016 URxvt.color8: #757773
5017
5018 ! Red
5019 URxvt.color1: #CC0000
5020 URxvt.color9: #EF2929
5021
5022 ! Green
5023 URxvt.color2: #4E9A06
5024 URxvt.color10: #8AE234
5025
5026 ! Yellow
5027 URxvt.color3: #C4A000
5028 URxvt.color11: #FCE94F
5029
5030 ! Blue
5031 URxvt.color4: #3465A4
5032 URxvt.color12: #729FCF
5033
5034 ! Magenta
5035 URxvt.color5: #75507B
5036 URxvt.color13: #AD7FA8
5037
5038 !! Cyan
5039 !URxvt.color6: #06989A
5040 !URxvt.color14: #34E2E2
5041 ! orange (replaces cyan)
5042 *color6:  #ce5c00
5043 *color14: #fcaf3e
5044
5045 ! White
5046 URxvt.color7: #D3D7CF
5047 URxvt.color15: #EEEEEC
5048 #+end_src
5049
5050 ** XDG
5051 :PROPERTIES:
5052 :header-args+: :tangle ~/.config/user-dirs.dirs
5053 :END:
5054
5055 #+begin_src conf
5056 XDG_DESKTOP_DIR="$HOME/Desktop"
5057 XDG_DOCUMENTS_DIR="$HOME/usr/docs"
5058 XDG_DOWNLOAD_DIR="$HOME/usr/dls"
5059 XDG_MUSIC_DIR="$HOME/usr/music"
5060 XDG_PICTURES_DIR="$HOME/usr/pics"
5061 XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
5062 XDG_TEMPLATES_DIR="$HOME/usr/Templates"
5063 XDG_VIDEOS_DIR="$HOME/usr/vids"
5064 #+end_src
5065
5066 ** Zathura
5067 :PROPERTIES:
5068 :header-args+: :tangle ~/.config/zathura/zathurarc
5069 :END:
5070
5071 #+begin_src conf
5072 set smooth-scroll true
5073 set selection-clipboard clipboard
5074 set zoom-step 05
5075 set default-bg "#272727"
5076 set statusbar-bg "#272727"
5077 set inputbar-bg "#373737"
5078 #+end_src
5079
5080 ** Zsh
5081
5082 My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
5083 [[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
5084 installed.
5085
5086 *** zimrc
5087 :PROPERTIES:
5088 :header-args+: :tangle ~/.zimrc
5089 :END:
5090
5091 #+begin_src sh
5092
5093
5094 #################
5095 # CORE SETTINGS #
5096 #################
5097
5098 #
5099 # Zim settings
5100 #
5101
5102 # Select what modules you would like enabled.
5103 # The second line of modules may depend on options set by modules in the first
5104 # line. These dependencies are noted on the respective module's README.md.
5105 zmodules=(directory environment git git-info history input ssh utility custom \
5106           syntax-highlighting history-substring-search prompt completion)
5107
5108
5109 ###################
5110 # MODULE SETTINGS #
5111 ###################
5112
5113 #
5114 # Prompt
5115 #
5116
5117 # Set your desired prompt here
5118 zprompt_theme='pure'
5119 #PURE_PROMPT_SYMBOL=λ
5120 #PURE_PROMPT_SYMBOL=δ
5121 PURE_PROMPT_SYMBOL=➜
5122
5123 #
5124 # Completion
5125 #
5126
5127 # set an optional host-specific filename for the completion cache file
5128 # if none is provided, the default '.zcompdump' is used.
5129 #zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
5130
5131 #
5132 # Utility
5133 #
5134
5135 # Uncomment to enable command correction prompts
5136 # See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
5137 setopt CORRECT
5138
5139 #
5140 # Environment
5141 #
5142
5143 # Set the string below to the desired terminal title format string.
5144 # The terminal title is redrawn upon directory change, however, variables like
5145 # ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
5146 #   http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
5147 # The example below uses the following format: 'username@host:/current/directory'
5148 ztermtitle='%n@%m:%~'
5149
5150 #
5151 # Input
5152 #
5153
5154 # Uncomment to enable double-dot expansion.
5155 # This appends '../' to your input for each '.' you type after an initial '..'
5156 #zdouble_dot_expand='true'
5157
5158 #
5159 # Syntax-Highlighting
5160 #
5161
5162 # This determines what highlighters will be used with the syntax-highlighting module.
5163 # Documentation of the highlighters can be found here:
5164 #   https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
5165 # For (u)rxvt, termite and gnome-terminal users,
5166 # removing the 'cursor' highlighter will fix the disappearing cursor problem
5167 #zhighlighters=(main brackets cursor)
5168 zhighlighters=(main brackets pattern)
5169
5170
5171 #
5172 # SSH
5173 #
5174
5175 # Load these ssh identities with the ssh module
5176 zssh_ids=(id_ed25519_amin)
5177
5178
5179 #
5180 # Pacman
5181 #
5182
5183 # Set (optional) pacman front-end.
5184 zpacman_frontend='yay'
5185
5186 # Load any helper scripts as defined here
5187 #zpacman_helper=(aur)
5188 #+end_src
5189
5190 *** zlogin
5191 :PROPERTIES:
5192 :header-args+: :tangle ~/.zlogin
5193 :END:
5194
5195 #+begin_src sh
5196
5197
5198 #
5199 # User configuration sourced by login shells
5200 #
5201
5202 # Initialize zim
5203 [[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
5204 #+end_src
5205
5206 *** zprofile
5207 :PROPERTIES:
5208 :header-args+: :tangle ~/.zprofile
5209 :END:
5210
5211 #+begin_src sh
5212 #PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
5213 #PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
5214 export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
5215 export XDG_CONFIG_HOME=$HOME/.config
5216 export XDG_DATA_HOME=$HOME/.local/share
5217 export XDG_DATA_DIRS=/usr/local/share:/usr/share
5218 export MAILDIR="$HOME/mail"
5219 export CVS_RSH=ssh
5220 #export MATHMODELS=$HOME/src/eiffel/mathmodels
5221 #export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
5222 #export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
5223
5224 # Eiffel2Java stuff
5225 #export JAVA_HOME=/usr/lib/jvm/default
5226 #export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
5227 #export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
5228 #export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
5229
5230 #export PATH="$HOME/usr/build/pvs:$PATH"
5231 #export SBCLISP_HOME=/usr/share/sbcl-source
5232 #export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
5233
5234 export MOZ_USE_XINPUT2=1  # precise scrolling in firefox
5235
5236 #export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
5237 #export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
5238
5239 if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
5240 #+end_src
5241
5242 *** zshenv
5243 :PROPERTIES:
5244 :header-args+: :tangle ~/.zshenv
5245 :END:
5246
5247 #+begin_src sh
5248 # Ensure that a non-login, non-interactive shell has a defined environment.
5249 if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
5250   source "${ZDOTDIR:-$HOME}/.zprofile"
5251 fi
5252 #+end_src
5253
5254 *** zshrc
5255 :PROPERTIES:
5256 :header-args+: :tangle ~/.zshrc
5257 :END:
5258
5259 #+begin_src sh
5260 # Bash-like navigation
5261 #export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
5262 #export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
5263 export WORDCHARS='*?[]~=&;!#$%^(){}<>'
5264 #ZLE_SPACE_SUFFIX_CHARS=$'|&'
5265
5266 #disable -r time       # disable shell reserved word
5267 #alias time='time -p'  # -p for POSIX output
5268
5269 # rehash if last command was pacaur or pacman
5270 # (so that zsh picks up changes in $PATH immediately)
5271 TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
5272
5273 #
5274 # User configuration sourced by interactive shells
5275 #
5276
5277 # Change default zim location
5278 export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
5279
5280 # Start zim
5281 [[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
5282
5283 ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
5284 #ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
5285
5286 setopt globdots
5287
5288 source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
5289 # source ~/.zsh/zsh-autopair/autopair.zsh
5290
5291
5292 ### fzf ###
5293
5294 source /usr/share/fzf/key-bindings.zsh
5295 source /usr/share/fzf/completion.zsh
5296
5297 # Accept history selection instead of putting it on
5298 # the command line
5299 fzf-history-widget-accept() {
5300   fzf-history-widget
5301   zle accept-line
5302 }
5303 #zle     -N   fzf-history-widget-accept
5304 #bindkey '^R' fzf-history-widget-accept
5305
5306 # alt+c preview
5307 export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
5308
5309 ### fzf ###
5310
5311
5312 # aliases
5313 alias mpv="mpv --ytdl-format mp4"
5314 alias mv="mv -iv"
5315 alias cp="cp -iv"
5316 alias scl=systemctl
5317 alias jcl=journalctl
5318 alias m="mbsync -Va; getmail; notmuch new"
5319 alias best="youtube-dl -f best"
5320 alias nixx="ssh amin@nix.aminb.org"
5321 alias fence="ssh aminb@fencepost.gnu.org"
5322
5323 aur() {
5324    cd ~/usr/build
5325    git clone https://aur.archlinux.org/${1}.git
5326    cd ${1}
5327 }
5328
5329 # i-beam cursor
5330 echo -e "\033[5 q"
5331 #echo -e "\033[6 q"
5332 #+end_src
5333
5334 * Scripts
5335
5336 This section contains various useful scripts and the ones used by the
5337 programs above. For instance, =toggle-tablet= for switching to and
5338 from tablet mode on my X220T, =toggle-presentation-mode= for toggling
5339 Xfce's presentation mode which keeps the screen awake, and
5340 =rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
5341 exact brightness value.
5342
5343 ** battery-percentage-time
5344 :PROPERTIES:
5345 :header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/sh"
5346 :END:
5347
5348 #+begin_src sh :tangle no
5349 dbus_send() {
5350         label=$1
5351         dbus-send --print-reply=literal --system \
5352                 --dest=org.freedesktop.UPower \
5353                 /org/freedesktop/UPower/devices/battery_BAT0 \
5354                 org.freedesktop.DBus.Properties.Get \
5355                 string:org.freedesktop.UPower.Device \
5356                 string:"${label}" | awk '{print $3}'
5357 }
5358
5359 perc=$(dbus_send 'Percentage')
5360 state=$(dbus_send 'State')
5361
5362 if [ "$state" -eq 2 ]; then  # Discharging
5363         secs=$(dbus_send 'TimeToEmpty')
5364 elif [ "$state" -eq 1 ]; then  # Charging
5365         secs=$(dbus_send 'TimeToFull')
5366 fi
5367
5368 printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60))
5369 #+end_src
5370
5371 ** rofi-light
5372 :PROPERTIES:
5373 :header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
5374 :END:
5375
5376 #+begin_src bash
5377 cur=$(light -G)
5378 val=$(rofi -dmenu -mesg "light    $cur" -p "light -S " -l 0 -width 12)
5379 light -S $val
5380 #+end_src
5381
5382 ** s (run sway)
5383 :PROPERTIES:
5384 :header-args+: :tangle ~/.local/bin/s :shebang "#!/bin/bash"
5385 :END:
5386
5387 #+begin_src bash
5388 export _JAVA_AWT_WM_NONREPARENTING=1
5389 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
5390 light -Scrs "intel_backlight" 2
5391 source $HOME/.zprofile
5392 sway
5393 #+end_src
5394
5395 ** sway-ws-util
5396 :PROPERTIES:
5397 :header-args+: :tangle ~/.local/bin/sway-ws-util :shebang "#!/bin/bash"
5398 :END:
5399
5400 #+begin_src bash
5401 curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name')
5402 [[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1))
5403 [[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1))
5404 dest_ws=-1
5405 op=-1
5406
5407 if [ "$1" = "switch" ] || [ "$1" = "move" ]; then
5408   op="$1"
5409   if [ "$2" = "prev" ]; then
5410     dest_ws="$prev_ws"
5411   elif [ "$2" = "next" ]; then
5412     dest_ws="$next_ws"
5413   else
5414     echo "Usage: $0 $1 {prev|next} [follow]"
5415     exit 1
5416   fi
5417 else
5418   echo "Usage: $0 {switch|move} {prev|next} [follow]"
5419   exit 1
5420 fi
5421
5422 if [ "$op" = "switch" ]; then
5423   sway workspace "$dest_ws"
5424 elif [ "$op" = "move" ]; then
5425   sway move container to workspace "$dest_ws"
5426   if [ "$3" = "follow" ]; then
5427     sway workspace "$dest_ws"
5428   fi
5429 fi
5430 #+end_src
5431
5432 ** toggle-layout
5433 :PROPERTIES:
5434 :header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
5435 :END:
5436
5437 #+begin_src bash :tangle no
5438 lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
5439
5440 if [ "$lang" = "us" ]; then
5441     setxkbmap ir
5442 else
5443     setxkbmap us
5444     # xmodmap $HOME/.Xmodmap
5445 fi
5446 #+end_src
5447
5448 ** toggle-presentation-mode
5449 :PROPERTIES:
5450 :header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
5451 :END:
5452
5453 #+begin_src bash :tangle no
5454 xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
5455 #+end_src
5456
5457 ** toggle-tablet
5458 :PROPERTIES:
5459 :header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
5460 :END:
5461
5462 This script toggles between a 'normal' mode and a 'tablet' mode, doing
5463 a few things:
5464
5465 - rotates the screen using =xrandr=, so that rotating the physical
5466   display of my X220t would have the laptop's battery on the right
5467   hand side,
5468 - enables touch screen,
5469 - properly rotates the stylus pen and touch screen pointers, and
5470 - toggles between RGB and Vertical BGR sub-pixel order.
5471
5472 #+begin_src bash :tangle no
5473 case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
5474     0)  # Screen is not rotated, we should rotate it right (90°)
5475            xrandr -o 3
5476            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
5477            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
5478            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
5479            xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
5480            ;;
5481     1)  # Currently top is rotated right, we should set it normal (0°)
5482           xrandr -o 0
5483           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
5484           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
5485           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
5486           xfconf-query -c xsettings -p /Xft/RGBA -s rgb
5487           ;;
5488     *)
5489            echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
5490            exit 1
5491            ;;
5492 esac
5493 #+end_src
5494
5495 ** unlock-def-gk.py
5496 :PROPERTIES:
5497 :header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
5498 :END:
5499
5500 #+begin_src python :tangle no
5501 import gnomekeyring as gk
5502 # list_item_ids_sync('login')[0] == 1L
5503 gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
5504 #+end_src
5505
5506 ** volume-info
5507 :PROPERTIES:
5508 :header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh"
5509 :END:
5510
5511 #+begin_src sh :tangle no
5512 cur_vol=$(pamixer --get-volume)
5513
5514 if [ $(pamixer --get-mute) = true ]; then
5515   printf 'mt \n' "$cur_vol"
5516 else
5517   printf '%02d \n' "$cur_vol"
5518 fi
5519 #+end_src
5520
5521 ** wp
5522
5523 My little wallpaper changer script.
5524
5525 *** wp
5526 :PROPERTIES:
5527 :header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
5528 :END:
5529
5530 #+begin_src bash :tangle no
5531 export DISPLAY=:0
5532
5533 case "$1" in
5534   "day")
5535     feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5536     ;;
5537   "night")
5538     feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5539     ;;
5540   *)
5541     echo $"Usage: $0 {day|night}"
5542     exit 1
5543 esac
5544 #+end_src
5545
5546 *** wp-auto
5547 :PROPERTIES:
5548 :header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
5549 :END:
5550
5551 #+begin_src bash :tangle no
5552 SED=$(which sed)
5553 ROFI=$(which rofi)
5554
5555 export DISPLAY=:0
5556 HOUR=$(date +%H)
5557
5558 if [ -z "${SED}" ]
5559 then
5560     echo "Did not find 'sed', script cannot continue."
5561     exit 1
5562 fi
5563 if [ -z "${ROFI}" ]
5564 then
5565     echo "Did not find rofi, there is no point to continue."
5566     exit 1
5567 fi
5568
5569 ###
5570 # Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
5571 # Repeated calls should leave the config clean-ish
5572 ###
5573 function set_theme()
5574 {
5575     CDIR="${HOME}/.config/rofi/"
5576     if [ ! -d "${CDIR}" ]
5577     then
5578         mkdir -p ${CDIR}
5579     fi
5580     if [ -f "${CDIR}/config" ]
5581     then
5582         ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
5583     fi
5584     echo "rofi.theme: ${1}" >> "${CDIR}/config"
5585
5586 }
5587
5588 if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
5589     then
5590         feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5591         xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
5592         set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
5593     else
5594         feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5595         xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
5596         set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
5597 fi
5598 #+end_src
5599
5600 *** wp.service
5601 :PROPERTIES:
5602 :header-args+: :tangle ~/.config/systemd/user/wp.service
5603 :END:
5604
5605 #+begin_src conf :tangle no
5606 [Unit]
5607 Description=wallpaper service
5608
5609 [Service]
5610 Type=oneshot
5611 ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
5612 #+end_src
5613
5614 *** wp.timer
5615 :PROPERTIES:
5616 :header-args+: :tangle ~/.config/systemd/user/wp.timer
5617 :END:
5618
5619 #+begin_src conf :tangle no
5620 [Unit]
5621 [Unit]
5622 Description=wallpaper timer
5623
5624 [Timer]
5625 OnCalendar=07,21:00
5626 Unit=wp.service
5627 Persistent=true
5628
5629 [Install]
5630 WantedBy=timers.target
5631 #+end_src
5632
5633 ** zathura-sync.sh
5634 :PROPERTIES:
5635 :header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
5636 :END:
5637
5638 #+begin_src sh
5639 pos="$1"
5640 pdffile="$2"
5641 zathura --synctex-forward "$pos" "$pdffile" || \
5642     (
5643     zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
5644     sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
5645 #+end_src
5646 ** Fun :)
5647
5648 *** eat-em
5649 :PROPERTIES:
5650 :header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
5651 :END:
5652
5653 #+begin_src sh
5654 # Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5655 # [ESC] character in original post removed here.
5656
5657 # ANSI Color -- use these variables to easily have different color
5658 #    and format output. Make sure to output the reset sequence after
5659 #    colors (f = foreground, b = background), and use the 'off'
5660 #    feature for anything you turn on.
5661
5662 initializeANSI()
5663 {
5664  esc="$(echo -en '\e')"
5665
5666   blackf="${esc}[30m";   redf="${esc}[31m";    greenf="${esc}[32m"
5667   yellowf="${esc}[33m"   bluef="${esc}[34m";   purplef="${esc}[35m"
5668   cyanf="${esc}[36m";    whitef="${esc}[37m"
5669
5670   blackb="${esc}[40m";   redb="${esc}[41m";    greenb="${esc}[42m"
5671   yellowb="${esc}[43m"   blueb="${esc}[44m";   purpleb="${esc}[45m"
5672   cyanb="${esc}[46m";    whiteb="${esc}[47m"
5673
5674   boldon="${esc}[1m";    boldoff="${esc}[22m"
5675   italicson="${esc}[3m"; italicsoff="${esc}[23m"
5676   ulon="${esc}[4m";      uloff="${esc}[24m"
5677   invon="${esc}[7m";     invoff="${esc}[27m"
5678
5679   reset="${esc}[0m"
5680 }
5681
5682 # note in this first use that switching colors doesn't require a reset
5683 # first - the new color overrides the old one.
5684
5685 #clear
5686
5687 initializeANSI
5688
5689 cat << EOF
5690
5691  ${yellowf}  ▄███████▄${reset}   ${redf}  ▄██████▄${reset}    ${greenf}  ▄██████▄${reset}    ${bluef}  ▄██████▄${reset}    ${purplef}  ▄██████▄${reset}    ${cyanf}  ▄██████▄${reset}
5692  ${yellowf}▄█████████▀▀${reset}  ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset}  ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset}  ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset}  ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset}  ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5693  ${yellowf}███████▀${reset}      ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset}  ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset}  ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset}  ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset}  ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5694  ${yellowf}███████▄${reset}      ${redf}████████████${reset}  ${greenf}████████████${reset}  ${bluef}████████████${reset}  ${purplef}████████████${reset}  ${cyanf}████████████${reset}
5695  ${yellowf}▀█████████▄▄${reset}  ${redf}██▀██▀▀██▀██${reset}  ${greenf}██▀██▀▀██▀██${reset}  ${bluef}██▀██▀▀██▀██${reset}  ${purplef}██▀██▀▀██▀██${reset}  ${cyanf}██▀██▀▀██▀██${reset}
5696  ${yellowf}  ▀███████▀${reset}   ${redf}▀   ▀  ▀   ▀${reset}  ${greenf}▀   ▀  ▀   ▀${reset}  ${bluef}▀   ▀  ▀   ▀${reset}  ${purplef}▀   ▀  ▀   ▀${reset}  ${cyanf}▀   ▀  ▀   ▀${reset}
5697
5698  ${boldon}${yellowf}  ▄███████▄   ${redf}  ▄██████▄    ${greenf}  ▄██████▄    ${bluef}  ▄██████▄    ${purplef}  ▄██████▄    ${cyanf}  ▄██████▄${reset}
5699  ${boldon}${yellowf}▄█████████▀▀  ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄  ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄  ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄  ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄  ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5700  ${boldon}${yellowf}███████▀      ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███  ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███  ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███  ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███  ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5701  ${boldon}${yellowf}███████▄      ${redf}████████████  ${greenf}████████████  ${bluef}████████████  ${purplef}████████████  ${cyanf}████████████${reset}
5702  ${boldon}${yellowf}▀█████████▄▄  ${redf}██▀██▀▀██▀██  ${greenf}██▀██▀▀██▀██  ${bluef}██▀██▀▀██▀██  ${purplef}██▀██▀▀██▀██  ${cyanf}██▀██▀▀██▀██${reset}
5703  ${boldon}${yellowf}  ▀███████▀   ${redf}▀   ▀  ▀   ▀  ${greenf}▀   ▀  ▀   ▀  ${bluef}▀   ▀  ▀   ▀  ${purplef}▀   ▀  ▀   ▀  ${cyanf}▀   ▀  ▀   ▀${reset}
5704
5705 EOF
5706 #+end_src
5707
5708 *** invade-em
5709 :PROPERTIES:
5710 :header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
5711 :END:
5712
5713 #+begin_src bash
5714 #
5715 # ANSI color scheme script featuring Space Invaders
5716 #
5717 # Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5718 # Modified by lolilolicon
5719 #
5720
5721 f=3 b=4
5722 for j in f b; do
5723   for i in {0..7}; do
5724     printf -v $j$i %b "\e[${!j}${i}m"
5725   done
5726 done
5727 bld=$'\e[1m'
5728 rst=$'\e[0m'
5729
5730 cat << EOF
5731
5732  $f1  ▀▄   ▄▀     $f2 ▄▄▄████▄▄▄    $f3  ▄██▄     $f4  ▀▄   ▄▀     $f5 ▄▄▄████▄▄▄    $f6  ▄██▄  $rst
5733  $f1 ▄█▀███▀█▄    $f2███▀▀██▀▀███   $f3▄█▀██▀█▄   $f4 ▄█▀███▀█▄    $f5███▀▀██▀▀███   $f6▄█▀██▀█▄$rst
5734  $f1█▀███████▀█   $f2▀▀███▀▀███▀▀   $f3▀█▀██▀█▀   $f4█▀███████▀█   $f5▀▀███▀▀███▀▀   $f6▀█▀██▀█▀$rst
5735  $f1▀ ▀▄▄ ▄▄▀ ▀   $f2 ▀█▄ ▀▀ ▄█▀    $f3▀▄    ▄▀   $f4▀ ▀▄▄ ▄▄▀ ▀   $f5 ▀█▄ ▀▀ ▄█▀    $f6▀▄    ▄▀$rst
5736
5737  $bld$f1▄ ▀▄   ▄▀ ▄   $f2 ▄▄▄████▄▄▄    $f3  ▄██▄     $f4▄ ▀▄   ▄▀ ▄   $f5 ▄▄▄████▄▄▄    $f6  ▄██▄  $rst
5738  $bld$f1█▄█▀███▀█▄█   $f2███▀▀██▀▀███   $f3▄█▀██▀█▄   $f4█▄█▀███▀█▄█   $f5███▀▀██▀▀███   $f6▄█▀██▀█▄$rst
5739  $bld$f1▀█████████▀   $f2▀▀▀██▀▀██▀▀▀   $f3▀▀█▀▀█▀▀   $f4▀█████████▀   $f5▀▀▀██▀▀██▀▀▀   $f6▀▀█▀▀█▀▀$rst
5740  $bld$f1 ▄▀     ▀▄    $f2▄▄▀▀ ▀▀ ▀▀▄▄   $f3▄▀▄▀▀▄▀▄   $f4 ▄▀     ▀▄    $f5▄▄▀▀ ▀▀ ▀▀▄▄   $f6▄▀▄▀▀▄▀▄$rst
5741
5742
5743                                      $f7▌$rst
5744
5745                                    $f7▌$rst
5746
5747                               $f7    ▄█▄    $rst
5748                               $f7▄█████████▄$rst
5749                               $f7▀▀▀▀▀▀▀▀▀▀▀$rst
5750
5751 EOF
5752 #+end_src