git.shemshak.org - ~bandali/configs/blob - rc.org

   1 #+title: rc.org
   2 #+property: header-args :comments link :mkdirp yes :results silent
   3
   4 * About
   5
   6 This org file contains the configuration files of pretty much every
   7 program I use. The files are tangled (i.e. exported, or derived) from
   8 this file using =org-babel=.
   9
  10 Note: This file is best viewed inside Emacs with org mode.
  11
  12 * Configs
  13
  14 This section contains the configuration files (dotfiles) of various
  15 programs I use.
  16
  17 ** bspwm
  18
  19 *** bspwmrc
  20 :PROPERTIES:
  21 :header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
  22 :END:
  23
  24 #+begin_src sh :tangle no
  25 sxhkd &
  26 sh ~/.fehbg &
  27 xfce4-panel -d &
  28 compton &
  29 sleep 0.5 && pasystray --notify=all &
  30
  31 bspc monitor -d I II III IV V VI VII VIII IX X
  32 #bspc monitor eDP-1 -d I II III IV V
  33 #bspc monitor HDMI-1 -d VI VII VIII IX X
  34
  35 #bspc config border_width         2
  36 #bspc config window_gap           8
  37 bspc config window_gap           0
  38
  39 bspc config bottom_padding 26
  40
  41 bspc config split_ratio          0.52
  42 bspc config borderless_monocle   true
  43 bspc config gapless_monocle      true
  44 bspc config click_to_focus       button1
  45 bspc config directional_focus_tightness low
  46
  47 #bspc rule -a Firefox desktop='^1' follow=on
  48 bspc rule -a Nightly desktop='^1' follow=on
  49 bspc rule -a Emacs desktop='^2' state=tiled follow=on
  50 #bspc rule -a Chromium desktop='^4' follow=on
  51 bspc rule -a URxvt state=floating
  52 bspc rule -a URxvt:tiled state=tiled
  53 bspc rule -a Connman-gtk state=floating
  54 bspc rule -a Xfce4-panel state=floating
  55 bspc rule -a TelegramDesktop state=floating
  56 bspc rule -a Ec state=floating
  57 bspc rule -a Pavucontrol state=floating
  58 bspc rule -a Eog state=floating
  59 bspc rule -a Seahorse state=floating
  60 bspc rule -a mpv state=floating
  61 bspc rule -a Evince state=floating
  62 bspc rule -a Meld state=floating
  63 bspc rule -a Autokey-gtk state=floating
  64 bspc rule -a Mousepad state=floating
  65 bspc rule -a Wrapper-1.0 state=floating
  66 bspc rule -a File-roller state=floating
  67 bspc rule -a Gnome-disks state=floating
  68 bspc rule -a Termite state=floating
  69 bspc rule -a Termite:tiled state=tiled
  70 bspc rule -a Thunderbird:Calendar state=floating
  71 bspc rule -a Audacity state=floating
  72 bspc rule -a Proof state=floating # pvs x-show-proof
  73 bspc rule -a Nm-connection-editor state=floating
  74 bspc rule -a Wire state=floating
  75 bspc rule -a discord state=floating
  76 bspc rule -a X2goclient state=floating
  77 bspc rule -a SimpleScreenRecorder state=floating
  78 bspc rule -a Gimp state=floating
  79 bspc rule -a Wrapper-2.0 state=floating
  80 bspc rule -a Zathura state=tiled
  81 #+end_src
  82
  83 *** sxhkdrc
  84 :PROPERTIES:
  85 :header-args+: :tangle ~/.config/sxhkd/sxhkdrc
  86 :END:
  87
  88 #+begin_src conf :tangle no
  89 #
  90 # wm independent hotkeys
  91 #
  92
  93 # terminal emulator
  94 super + {_,shift} + Return
  95         urxvt{_, -name tiled}
  96
  97 #super + {_,shift} + Return
  98 #       termite{_, --name=tiled}
  99
 100 # program launcher
 101 super + space
 102         rofi -show run -display-run '> ' -display-window ' 🗔 '
 103
 104 super + alt + space
 105         xfce4-popup-whiskermenu
 106
 107 # window finder
 108 super + backslash
 109         rofi -show window  -display-run '> ' -display-window ' 🗔 '
 110
 111 # password manager
 112 alt + space
 113         rofi-pass
 114
 115 # firefox
 116 #super + r
 117 #       firefox
 118
 119 # chromium
 120 #super + c
 121 #       chromium -incognito
 122
 123 # emacs
 124 super + e
 125         emacs
 126
 127 # make sxhkd reload its configuration files:
 128 super + Escape
 129         pkill -USR1 -x sxhkd
 130
 131 # volume {up,down}
 132 XF86Audio{Raise,Lower}Volume
 133         pamixer --allow-boost --{in,de}crease 5
 134
 135 # mute
 136 XF86AudioMute
 137         pamixer --toggle-mute
 138
 139 XF86AudioMicMute
 140         pactl set-source-mute 1 toggle
 141
 142 # playback control
 143 XF86Audio{Play,Prev,Next}
 144         mpc {toggle,prev,next}
 145
 146 # lock the screen
 147 super + shift + q
 148         light-locker-command -l
 149
 150 # Toggle keyboard layout
 151 super + F7
 152         toggle-layout
 153
 154 # Toggle Xfce presentation mode
 155 XF86LaunchB
 156         toggle-presentation-mode
 157
 158 # monitor brightness
 159 XF86MonBrightness{Up,Down}
 160         light -{A,U} 5
 161
 162 super + apostrophe
 163         rofi-light
 164
 165 # keyboard brightness
 166 #XF86KbdBrightness{Up,Down}
 167 #       kbdlight {up,down}
 168
 169 XF86RotateWindows
 170         toggle-tablet
 171
 172 #
 173 # bspwm hotkeys
 174 #
 175
 176 # quit bspwm normally
 177 super + alt + Escape
 178         bspc quit
 179
 180 # close and kill
 181 super + {w,q}
 182         bspc node -{c,k}
 183
 184 # alternate between the tiled and monocle layout
 185 super + m
 186         bspc desktop -l next
 187
 188 # send the newest marked node to the newest preselected node
 189 super + y
 190         bspc node newest.marked.local -n newest.!automatic.local
 191
 192 # swap the current node and the biggest node
 193 super + g
 194         bspc node -s biggest
 195
 196 #
 197 # state/flags
 198 #
 199
 200 # set the window state
 201 super + {t,shift + t,s,f}
 202         bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
 203
 204 # set the node flags
 205 super + ctrl + {m,x,y,z}
 206         bspc node -g {marked,locked,sticky,private}
 207
 208 #
 209 # focus/swap
 210 #
 211
 212 # focus the node in the given direction
 213 super + {_,shift + }{h,j,k,l}
 214         bspc node -{f,s} {west,south,north,east}
 215
 216 # focus the node for the given path jump
 217 super + {p,b,comma,period}
 218         bspc node -f @{parent,brother,first,second}
 219
 220 # focus the next/previous node in the current desktop
 221 super + {_,shift + }c
 222         bspc node -f {next,prev}.local
 223
 224 # focus the next/previous desktop in the current monitor
 225 super + bracket{left,right}
 226         bspc desktop -f {prev,next}.local
 227
 228 # send to next/prev desktop
 229 super + shift + bracket{left,right}
 230         bspc node -d {prev,next} --follow
 231
 232 # focus the last node/desktop
 233 super + {grave,Tab}
 234         bspc {node,desktop} -f last
 235
 236 # focus the older or newer node in the focus history
 237 super + {o,i}
 238         bspc wm -h off; \
 239         bspc node {older,newer} -f; \
 240         bspc wm -h on
 241
 242 # focus or send to the given desktop
 243 super + {_,shift + }{1-9,0}
 244         bspc {desktop -f,node -d} '^{1-9,10}'
 245
 246 #
 247 # preselect
 248 #
 249
 250 # preselect the direction
 251 super + ctrl + {h,j,k,l}
 252         bspc node -p {west,south,north,east}
 253
 254 # preselect the ratio
 255 super + ctrl + {1-9}
 256         bspc node -o 0.{1-9}
 257
 258 # cancel the preselection for the focused node
 259 super + ctrl + space
 260         bspc node -p cancel
 261
 262 # cancel the preselection for the focused desktop
 263 super + ctrl + shift + space
 264         bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
 265
 266 #
 267 # move/resize
 268 #
 269
 270 # expand a window by moving one of its side outward
 271 super + alt + {h,j,k,l}
 272         bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
 273
 274 # contract a window by moving one of its side inward
 275 super + alt + shift + {h,j,k,l}
 276         bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
 277
 278 # move a floating window
 279 super + {Left,Down,Up,Right}
 280         bspc node -v {-20 0,0 20,0 -20,20 0}
 281
 282 #alt + bracket{left,right}
 283 #       xdotool key --clearmodifiers ctrl+Page_{Up,Down}
 284 #+end_src
 285
 286 ** compton
 287 :PROPERTIES:
 288 :header-args+: :tangle ~/.config/compton.conf
 289 :END:
 290
 291 #+begin_src conf :tangle no
 292 # Shadow
 293 shadow = false;                 # Enabled client-side shadows on windows.
 294 no-dock-shadow = true;          # Avoid drawing shadows on dock/panel windows.
 295 no-dnd-shadow = true;           # Don't draw shadows on DND windows.
 296 clear-shadow = true;            # Zero the part of the shadow's mask behind the
 297                                 # window. Fix some weirdness with ARGB windows.
 298 shadow-radius = 5;              # The blur radius for shadows. (default 12)
 299 shadow-offset-x = -5;           # The left offset for shadows. (default -15)
 300 shadow-offset-y = -5;           # The top offset for shadows. (default -15)
 301 # shadow-opacity = 0.7;         # The translucency for shadows. (default .75)
 302 # shadow-red = 0.0;             # Red color value of shadow. (0.0 - 1.0, defaults to 0)
 303 # shadow-green = 0.0;           # Green color value of shadow. (0.0 - 1.0, defaults to 0)
 304 # shadow-blue = 0.0;            # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
 305 shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ];    # Exclude conditions for shadows.
 306 # shadow-exclude = "n:e:Notification";
 307 #shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
 308 shadow-ignore-shaped = true;    # Avoid drawing shadow on all shaped windows
 309                                 # (see also: --detect-rounded-corners)
 310
 311 # Opacity
 312 menu-opacity = 1.0;                     # The opacity for menus. (default 1.0)
 313 #inactive-opacity = 0.9;                        # Default opacity of inactive windows. (0.0 - 1.0)
 314 # active-opacity = 0.8;                 # Default opacity for active windows. (0.0 - 1.0)
 315 frame-opacity = 1.0;                    # Opacity of window titlebars and borders. (0.1 - 1.0)
 316 # inactive-opacity-override = true;     # Let inactive opacity set by 'inactive-opacity' overrides
 317                                         # value of _NET_WM_OPACITY. Bad choice.
 318 alpha-step = 0.06;                      # XRender backend: Step size for alpha pictures. Increasing
 319                                         # it may result in less X resource usage,
 320                                         # Yet fading may look bad.
 321 #inactive-dim = 0.5;                    # Dim inactive windows. (0.0 - 1.0)
 322 #inactive-dim-fixed = true;             # Do not let dimness adjust based on window opacity.
 323 # blur-background = true;               # Blur background of transparent windows.
 324                                         # Bad performance with X Render backend.
 325                                         # GLX backend is preferred.
 326 # blur-background-frame = true;         # Blur background of opaque windows with transparent
 327                                         # frames as well.
 328 blur-background-fixed = true;           # Do not let blur radius adjust based on window opacity.
 329 blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
 330                                         # Exclude conditions for background blur.
 331
 332 # Fading
 333 fading = false;                 # Fade windows during opacity changes.
 334 fade-delta = 3;         # The time between steps in a fade in milliseconds. (default 10).
 335 fade-in-step = 0.03;            # Opacity change between steps while fading in. (default 0.028).
 336 fade-out-step = 0.03;           # Opacity change between steps while fading out. (default 0.03).
 337 # no-fading-openclose = true;   # Avoid fade windows in/out when opening/closing.
 338 fade-exclude = [ ];             # Exclude conditions for fading.
 339
 340 # Other
 341 backend = "glx"                 # Backend to use: "xrender" or "glx". GLX backend is typically
 342                                 # much faster but depends on a sane driver.
 343 mark-wmwin-focused = true;      # Try to detect WM windows and mark them as active.
 344 mark-ovredir-focused = true;    # Mark all non-WM but override-redirect windows active (e.g. menus).
 345 use-ewmh-active-win = true;     # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
 346                                 # instead of using FocusIn/Out events. Usually more reliable but
 347                                 # depends on a EWMH-compliant WM.
 348 detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
 349 detect-client-opacity = true;   # Detect _NET_WM_OPACITY on client windows, useful for window
 350                                 # managers not passing _NET_WM_OPACITY of client windows to frame
 351                                 # windows.
 352 refresh-rate = 0;               # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
 353 vsync = "drm";                  # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
 354                                 # See man page for more details.
 355 dbe = false;                    # Enable DBE painting mode. Rarely needed.
 356 paint-on-overlay = true;        # Painting on X Composite overlay window. Recommended.
 357 sw-opti = false;                # Limit compton to repaint at most once every 1 / refresh_rate.
 358                                 # Incompatible with certain VSync methods.
 359 unredir-if-possible = false;    # Unredirect all windows if a full-screen opaque window is
 360                                 # detected, to maximize performance for full-screen windows.
 361 focus-exclude = [ ];            # A list of conditions of windows that should always be considered
 362                                 # focused.
 363 detect-transient = true;        # Use WM_TRANSIENT_FOR to group windows, and consider windows in
 364                                 # the same group focused at the same time.
 365 detect-client-leader = true;    # Use WM_CLIENT_LEADER to group windows.
 366 invert-color-include = [ ];     # Conditions for windows to be painted with inverted color.
 367
 368 # GLX backend                   # GLX backend fine-tune options. See man page for more info.
 369 glx-no-stencil = true;          # Recommended.
 370 glx-copy-from-front = false;    # Useful with --glx-swap-method,
 371 # glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
 372 # glx-no-rebind-pixmap = true;  # Recommended if it works.
 373 glx-no-rebind-pixmap = true;    # Recommended if it works.
 374 #glx-swap-method = "4"; # See man page.
 375 glx-swap-method = "4";  # See man page.
 376
 377 # Window type settings
 378 wintypes:
 379 {
 380   tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
 381   menu = { shadow = false; };
 382   dropdown_menu = { shadow = false; };
 383   popup_menu =  { shadow = false; };
 384   utility =  { shadow = false; };
 385   # fade: Fade the particular type of windows.
 386   # shadow: Give those windows shadow
 387   # opacity: Default opacity for the type of windows.
 388   # focus: Whether to always consider windows of this type focused.
 389 };
 390 #+end_src
 391
 392 ** Dunst
 393 :PROPERTIES:
 394 :header-args+: :tangle ~/.config/dunst/dunstrc
 395 :END:
 396
 397 #+begin_src conf
 398 [global]
 399 #font = Ubuntu Mono 10.5
 400 font = Inconsolata 11
 401
 402 # Path to default icons.
 403 icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
 404
 405 icon_position = left
 406 # <b>bold</b>
 407 # <i>italic</i>
 408 # <s>strikethrough<s/>
 409 # <u>underline</u>
 410 markup = full
 411 # The format of the message. Possible variables are:
 412 #   %a  appname
 413 #   %s  summary
 414 #   %b  body
 415 #   %i  iconname (including its path)
 416 #   %I  iconname (without its path)
 417 #   %p  progress value if set ([  0%] to [100%]) or nothing
 418 # Markup is allowed
 419 format = "<b>%s</b>\n%b"
 420 # Sort messages by urgency
 421 sort = yes
 422 # Show how many messages are currently hidden (because of geometry)
 423 indicate_hiddenl= no
 424 # Alignment of message text.
 425 # Possible values are "left", "center" and "right"
 426 alignment = center
 427 # The frequency with wich text that is longer than the notification
 428 # window allows bounces back and forth.
 429 # This option conflicts with 'word_wrap'.
 430 # Set to 0 to disable
 431 bounce_freq = 3
 432 # show age of message if message is older than show_age_threshold seconds.
 433 # set to -1 to disable
 434 show_age_threshold = -1
 435 # split notifications into multiple lines if they don't fit into geometry
 436 word_wrap = yes
 437 # ignore newlines '\n' in notifications
 438 ignore_newline = no
 439 # The geometry of the message window.
 440 # geometry [{width}]x{height}][+/-{x}+/-{y}]
 441 # The height is measured in number of notifications everything else in pixels. If the width
 442 # is omitted but the height is given ("-geometry x2"), the message window
 443 # expands over the whole screen (dmenu-like). If width is 0,
 444 # the window expands to the longest message displayed.
 445 # A positive x is measured from the left, a negative from the
 446 # right side of the screen.  Y is measured from the top and down respectevly.
 447 # The width can be negative. In this case the actual width is the
 448 # screen width minus the width defined in within the geometry option.
 449 #geometry = "410x12-12+12"
 450 #geometry = "0x0-30-30"
 451 geometry = "260x12-30-30"
 452 # The transparency of the window. range: [0; 100]
 453 # This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
 454 transparency = 0
 455 # Don't remove messages, if the user is idle (no mouse or keyboard input)
 456 # for longer than idle_threshold seconds.
 457 # Set to 0 to disable.
 458 idle_threshold = 120
 459 # Which monitor should the notifications be displayed on.
 460 monitor = 0
 461 # Display notification on focused monitor. Possible modes are:
 462 # mouse: follow mouse pointer
 463 # keyboard: follow window with keyboard focus
 464 # none: don't follow anything
 465 #
 466 # "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
 467 # This should be the case for almost all modern windowmanagers.
 468 #
 469 # If this option is set to mouse or keyboard, the monitor option will be
 470 # ignored.
 471 follow = keyboard
 472 # should a notification popped up from history be sticky or
 473 # timeout as if it would normally do.
 474 sticky_history = yes
 475 # The height of a single line. If the height is smaller than the font height,
 476 # it will get raised to the font height.
 477 # This adds empty space above and under the text.
 478 line_height = 0
 479
 480 show_indicators = yes
 481
 482 # Draw a line of 'separatpr_height' pixel height between two notifications.
 483 # Set to 0 to disable
 484 separator_height = 3
 485 # padding between text and separator
 486 padding = 8
 487 # horizontal padding
 488 horizontal_padding = 8
 489 # Define a color for the separator.
 490 # possible values are:
 491 #  * auto: dunst tries to find a color fitting to the background
 492 #  * foreground: use the same color as the foreground
 493 #  * frame: use the same color as the frame.
 494 #  * anything else will be interpreted as a X color
 495 separator_color = foreground
 496 # print a notification on startup
 497 # This is mainly for error detection, since dbus (re-)starts dunst
 498 # automatically after a crash.
 499 startup_notification = false
 500 # dmenu path
 501 #dmenu = /usr/bin/dmenu -p dunst:
 502 dmenu = /usr/bin/rofi -dmenu -p dunst:
 503 # browser for opening urls in context menu
 504 browser = /usr/bin/firefox -new-tab
 505 [frame]
 506 width = 0
 507 color = "#377222"
 508 [shortcuts]
 509 # shortcuts are specified as [modifier+][modifier+]...key
 510 # available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
 511 # and 'mod4' (windows-key)
 512 # xev might be helpful to find names for keys
 513 # close notification
 514 close = ctrl+space
 515 # close all notifications
 516 close_all = ctrl+shift+space
 517 # redisplay last message(s)
 518 # On the US keyboard layout 'grave' is normally above TAB and left of '1'.
 519 history = ctrl+shift+h
 520 # context menu
 521 context = ctrl+shift+period
 522 [urgency_low]
 523 # IMPORTANT: colors have to be defined in quotation marks.
 524 # Otherwise the '#' and following  would be interpreted as a comment.
 525 background = "#1d2a30"
 526 foreground = "#71c2af"
 527 timeout = 3
 528 [urgency_normal]
 529 background = "#1d2a30"
 530 foreground = "#71c2af"
 531 timeout = 0
 532 [urgency_critical]
 533 background = "#1d2a30"
 534 foreground = "#ff9982"
 535 timeout = 0
 536
 537 # Every section that isn't one of the above is interpreted as a rules
 538 # to override settings for certain messages.
 539 # Messages can be matched by 'appname', 'summary', 'body' or 'icon'
 540 # and you can override the 'timeout', 'urgency', 'foreground', 'background'
 541 # and 'format'.
 542 # Shell-like globbing will get expanded.
 543 #
 544 # SCRIPTING
 545 # you can specify a script that gets run when the rule matches by setting
 546 # the 'script' option.
 547 # The script will be called as follows:
 548 # script appname summary body icon urgency
 549 # where urgency can be "LOW", "NORMAL" or "CRITICAL".
 550 #
 551 # NOTE: if you don't want a notification to be displayed, set the format to ""
 552 # NOTE: It might be helpful to run dunst -print in a terminal in order to find
 553 # fitting options for rules.
 554 #[espeak]
 555 #    summary = "*"
 556 #    script = dunst_espeak.sh
 557 #[script-test]
 558 #    summary = "*script*"
 559 #    script = dunst_test.sh
 560 #[ignore]
 561 ## This notification will not be displayed
 562 #    summary = "foobar"
 563 #    format = ""
 564 #[signed_on]
 565 #    appname = Pidgin
 566 #    summary = "*signed on*"
 567 #    urgency = low
 568 #
 569 #[signed_off]
 570 #    appname = Pidgin
 571 #    summary = *signed off*
 572 #    urgency = low
 573 #
 574 #[says]
 575 #    appname = Pidgin
 576 #    summary = *says*
 577 #    urgency = critical
 578 #
 579 #[twitter]
 580 #    appname = Pidgin
 581 #    summary = *twitter.com*
 582 #    urgency = normal
 583 #
 584 [xfpm-backlight]
 585     summary = *Brightness*
 586     urgency = low
 587 #+end_src
 588
 589 ** Fontconfig
 590 :PROPERTIES:
 591 :header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
 592 :END:
 593
 594 #+begin_src xml
 595 <?xml version="1.0"?>
 596 <!DOCTYPE fontconfig SYSTEM "fonts.dtd">
 597 <fontconfig>
 598  <match target="font">
 599   <edit mode="assign" name="rgba">
 600    <const>rgb</const>
 601   </edit>
 602  </match>
 603  <match target="font">
 604   <edit mode="assign" name="hinting">
 605    <bool>true</bool>
 606   </edit>
 607  </match>
 608  <match target="font">
 609   <edit mode="assign" name="hintstyle">
 610    <const>hintslight</const>
 611   </edit>
 612  </match>
 613  <match target="font">
 614   <edit mode="assign" name="antialias">
 615    <bool>true</bool>
 616   </edit>
 617  </match>
 618  <match target="font">
 619   <edit mode="assign" name="lcdfilter">
 620    <const>lcddefault</const>
 621   </edit>
 622  </match>
 623  <dir>~/.fonts</dir>
 624
 625  <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
 626  <alias binding="same">
 627   <family>Helvetica</family>
 628   <accept>
 629    <family>Liberation Sans</family>
 630   </accept>
 631 </alias>
 632 </fontconfig>
 633 #+end_src
 634
 635 ** Git
 636
 637 *** gitconfig
 638 :PROPERTIES:
 639 :header-args+: :tangle ~/.gitconfig
 640 :END:
 641
 642 **** user
 643 #+begin_src conf
 644 [user]
 645     name = Amin Bandali
 646     email = amin@aminb.org
 647     signingkey = 4E05246AB0BF7FFB
 648 #+end_src
 649
 650 **** signing
 651 #+begin_src conf
 652 [commit]
 653     gpgsign = true
 654 # [format]
 655 #     signoff = true
 656 #+end_src
 657
 658 **** core
 659 #+begin_src conf
 660 [core]
 661     autocrlf = input  # CRLF -> LF on commit
 662     editor = emacsclient -t
 663     excludesfile = ~/.gitignore_global
 664     pager = "less"
 665 #+end_src
 666
 667 **** gpg
 668 #+begin_src conf
 669 [gpg]
 670     program = gpg2
 671 #+end_src
 672
 673 **** alias
 674 #+begin_src conf
 675 [alias]
 676     git = !exec git  # handle nested git calls, e.g. git git status
 677     aliases = config --get-regexp '^alias\\.'
 678     a = add
 679     s = status
 680     sl = status --long
 681     c = checkout
 682     cb = checkout -b
 683     b = branch
 684     r = rebase
 685     p = pull
 686     pr = pull --rebase
 687     ps = push
 688     psf = push --force
 689 #+end_src
 690
 691 **** color
 692 #+begin_src conf
 693 [color]
 694     ui = auto
 695 [color "status"]
 696     added = green bold
 697     changed = red bold
 698     untracked = red bold
 699 [color "branch"]
 700     current = green bold
 701     remote = magenta bold
 702 [color "diff"]
 703     new = green bold
 704     old = red bold
 705 #+end_src
 706
 707 **** status
 708 #+begin_src conf
 709 [status]
 710     # showUntrackedFiles = all
 711     short=true
 712     branch=true
 713 #+end_src
 714
 715 **** github
 716 #+begin_src conf
 717 [github]
 718         user = aminb
 719 #+end_src
 720
 721 **** send-email
 722 #+begin_src conf
 723 [sendemail]
 724         smtpuser = amin@aminb.org
 725         smtpserver = nix.aminb.org
 726         smtpserverport = 587
 727         smtpencryption = tls
 728         annotate = yes
 729 #+end_src
 730
 731 *** gitignore
 732 :PROPERTIES:
 733 :header-args+: :tangle ~/.gitignore_global
 734 :END:
 735
 736 #+begin_src conf
 737 *.orig
 738 *.py[co]
 739 *.sublime-workspace
 740 *~
 741 .DS_Store
 742 *.elc
 743 *-autoloads.el
 744 #+end_src
 745
 746 ** [[https://github.com/Leinnan/i3gs][i3gs]]
 747 :PROPERTIES:
 748 :header-args+: :tangle ~/.config/i3gs/config
 749 :END:
 750
 751 #+begin_src conf :comments none
 752 borders_width=0 0 2 0
 753 separator_width=10
 754
 755 [mpd]
 756 preset=MPD
 757 title=<span weight='heavy' fgcolor='#7FDBFF'> </span>
 758 borders_color=#7FDBFF
 759
 760 [ram]
 761 preset=RAM
 762 title=<span weight='heavy' fgcolor='#3D9970'> </span>
 763 borders_color=#3D9970
 764
 765 [cpu]
 766 preset=CPU
 767 title=<span weight='heavy' fgcolor='#2ECC40'> </span>
 768 borders_color=#2ECC40
 769
 770 [hdd]
 771 preset=HDD
 772 title=<span weight='heavy' fgcolor='#01FF70'> </span>
 773 borders_color=#01FF70
 774
 775 [battery]
 776 preset=BAT
 777 command=battery-percentage-time
 778 title=<span weight='heavy' fgcolor='#39CCCC'> </span>
 779 borders_color=#39CCCC
 780
 781 [wifi]
 782 preset=WIFI
 783 title=<span weight='heavy' fgcolor='#01FF70'> </span>
 784 borders_color=#01FF70
 785
 786 [date]
 787 preset=DATE
 788 command=date '+%-I:%M, %a %b %d'
 789 title=<span weight='heavy' fgcolor='#FFDC00'> </span>
 790 borders_color=#FFDC00
 791 separator_width=0
 792 #+end_src
 793 ** Latexmk
 794 :PROPERTIES:
 795 :header-args+: :tangle ~/.latexmkrc
 796 :END:
 797
 798 #+begin_src conf
 799 $pdf_previewer = "start zathura %O %S";
 800 $clean_ext = "aux out";
 801
 802 # $pdf_update_method = 4;
 803 # $pdf_update_command = "zathura %O %S";
 804
 805 # Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
 806 # by Ctrl+click in the PDF.
 807 # Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
 808 # editor.
 809 # $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
 810 #+end_src
 811
 812 ** libinput
 813
 814 Improve XPS 15 9560's touchpad experience.
 815
 816 # begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
 817 #+begin_src conf :tangle no
 818 Section "InputClass"
 819     Identifier "libinput touchpad catchall"
 820     Driver "libinput"
 821     MatchIsTouchpad "on"
 822     Option "ClickMethod" "clickfinger"
 823     Option "NaturalScrolling" "true"
 824     Option "Tapping" "on"
 825     Option "TappingButtonMap" "lrm"
 826 EndSection
 827 #+end_src
 828
 829 ** getmail
 830
 831 *** getmailrc
 832 :PROPERTIES:
 833 :header-args+: :tangle ~/.getmail/getmailrc
 834 :END:
 835
 836 #+begin_src conf
 837 [retriever]
 838 type = SimplePOP3SSLRetriever
 839 server = fencepost.gnu.org
 840 username = aminb
 841 password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
 842 port = 995
 843 use_apop = True
 844
 845 [destination]
 846 type = Maildir
 847 path = ~/mail/gnu/Inbox/
 848
 849 [options]
 850 delete = True
 851 #+end_src
 852
 853 *** getmail.service
 854 :PROPERTIES:
 855 :header-args+: :tangle ~/.config/systemd/user/getmail.service
 856 :END:
 857
 858 #+begin_src conf :tangle no
 859 [Unit]
 860 Description=getmail service
 861
 862 [Service]
 863 Type=oneshot
 864 ExecStart=/usr/bin/getmail
 865 StandardOutput=syslog
 866 StandardError=syslog
 867 #+end_src
 868
 869 *** getmail.timer
 870 :PROPERTIES:
 871 :header-args+: :tangle ~/.config/systemd/user/getmail.timer
 872 :END:
 873
 874 #+begin_src conf :tangle no
 875 [Unit]
 876 Description=getmail timer
 877
 878 [Timer]
 879 OnCalendar=*:0/30
 880 Persistent=true
 881 Unit=getmail.service
 882
 883 [Install]
 884 WantedBy=timers.target
 885 #+end_src
 886
 887 ** GnuPG
 888 :PROPERTIES:
 889 :header-args+: :tangle ~/.gnupg/gpg-agent.conf
 890 :END:
 891
 892 #+begin_src conf
 893 default-cache-ttl 43200
 894 max-cache-ttl 43200
 895
 896 default-cache-ttl-ssh 10800
 897 max-cache-ttl-ssh 10800
 898
 899 # pinentry-program /usr/bin/pinentry-qt
 900 #+end_src
 901
 902 ** GTK
 903
 904 *** gtk-2.0
 905 :PROPERTIES:
 906 :header-args+: :tangle ~/.gtkrc-2.0
 907 :END:
 908
 909 #+begin_src conf
 910 gtk-theme-name="Greybird"
 911 gtk-icon-theme-name="Paper"
 912 gtk-font-name="Ubuntu 10"
 913 gtk-menu-images=0
 914 # gtk-key-theme-name = "Emacs"
 915 #+end_src
 916
 917 *** gtk-3.0
 918 :PROPERTIES:
 919 :header-args+: :tangle ~/.config/gtk-3.0/settings.ini
 920 :END:
 921
 922 #+begin_src conf :tangle no
 923 [Settings]
 924 gtk-icon-theme-name = Paper
 925 # gtk-theme-name = Adwaita
 926
 927 gtk-theme-name = Greybird
 928 # gtk-theme-name = Arc-Darker
 929 # gtk-theme-name = Numix-ArchBlue
 930
 931 gtk-font-name = Ubuntu 10
 932 # gtk-key-theme-name = Emacs
 933 #+end_src
 934
 935 ** isync
 936
 937 *** mbsyncrc
 938 :PROPERTIES:
 939 :header-args+: :tangle ~/.mbsyncrc
 940 :END:
 941
 942 #+begin_src conf
 943 # Global defaults
 944 CopyArrivalDate yes
 945
 946 ######
 947 IMAPAccount amin
 948 Host nix.aminb.org
 949 User amin@aminb.org
 950 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
 951 SSLType IMAPS
 952
 953 IMAPStore amin-remote
 954 Account amin
 955
 956 MaildirStore amin-local
 957 Path ~/mail/amin/
 958 Inbox ~/mail/amin/Inbox
 959 SubFolders Verbatim
 960
 961 Channel amin
 962 Master :amin-remote:
 963 Slave :amin-local:
 964 Patterns * !dovecot*
 965 Create Both
 966 SyncState *
 967
 968 ######
 969 IMAPAccount uwaterloo
 970 Host connect.uwaterloo.ca
 971 User abandali
 972 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
 973 SSLType IMAPS
 974
 975 IMAPStore uwaterloo-remote
 976 Account uwaterloo
 977
 978 MaildirStore uwaterloo-local
 979 Path ~/mail/uwaterloo/
 980 Inbox ~/mail/uwaterloo/Inbox
 981 SubFolders Verbatim
 982
 983 Channel uwaterloo
 984 Master :uwaterloo-remote:
 985 Slave :uwaterloo-local:
 986 Patterns * !dovecot*
 987 Create Both
 988 SyncState *
 989 #+end_src
 990
 991 *** mbsync.service
 992 :PROPERTIES:
 993 :header-args+: :tangle ~/.config/systemd/user/mbsync.service
 994 :END:
 995
 996 #+begin_src conf :tangle no
 997 [Unit]
 998 Description=mbsync service
 999
1000 [Service]
1001 Type=oneshot
1002 ExecStart=/usr/bin/mbsync -Va
1003 StandardOutput=syslog
1004 StandardError=syslog
1005 #+end_src
1006
1007 *** mbsync.timer
1008 :PROPERTIES:
1009 :header-args+: :tangle ~/.config/systemd/user/mbsync.timer
1010 :END:
1011
1012 #+begin_src conf :tangle no
1013 [Unit]
1014 Description=mbsync timer
1015
1016 [Timer]
1017 OnCalendar=*:0/15
1018 Persistent=true
1019 Unit=mbsync.service
1020
1021 [Install]
1022 WantedBy=timers.target
1023 #+end_src
1024
1025 ** mpd
1026 :PROPERTIES:
1027 :header-args+: :tangle ~/.config/mpd/mpd.conf
1028 :END:
1029
1030 #+begin_src conf
1031 # An example configuration file for MPD.
1032 # Read the user manual for documentation: http://www.musicpd.org/doc/user/
1033
1034
1035 # Files and directories #######################################################
1036 #
1037 # This setting controls the top directory which MPD will search to discover the
1038 # available audio files and add them to the daemon's online database. This
1039 # setting defaults to the XDG directory, otherwise the music directory will be
1040 # be disabled and audio files will only be accepted over ipc socket (using
1041 # file:// protocol) or streaming files over an accepted protocol.
1042 #
1043 music_directory         "~/usr/music"
1044 #
1045 # This setting sets the MPD internal playlist directory. The purpose of this
1046 # directory is storage for playlists created by MPD. The server will use
1047 # playlist files not created by the server but only if they are in the MPD
1048 # format. This setting defaults to playlist saving being disabled.
1049 #
1050 playlist_directory              "~/.mpd/playlists"
1051 #
1052 # This setting sets the location of the MPD database. This file is used to
1053 # load the database at server start up and store the database while the
1054 # server is not up. This setting defaults to disabled which will allow
1055 # MPD to accept files over ipc socket (using file:// protocol) or streaming
1056 # files over an accepted protocol.
1057 #
1058 db_file                 "~/.mpd/database"
1059 #
1060 # These settings are the locations for the daemon log files for the daemon.
1061 # These logs are great for troubleshooting, depending on your log_level
1062 # settings.
1063 #
1064 # The special value "syslog" makes MPD use the local syslog daemon. This
1065 # setting defaults to logging to syslog, otherwise logging is disabled.
1066 #
1067 log_file                        "~/.mpd/log"
1068 #
1069 # This setting sets the location of the file which stores the process ID
1070 # for use of mpd --kill and some init scripts. This setting is disabled by
1071 # default and the pid file will not be stored.
1072 #
1073 pid_file                        "~/.mpd/pid"
1074 #
1075 # This setting sets the location of the file which contains information about
1076 # most variables to get MPD back into the same general shape it was in before
1077 # it was brought down. This setting is disabled by default and the server
1078 # state will be reset on server start up.
1079 #
1080 state_file                      "~/.mpd/state"
1081 #
1082 # The location of the sticker database.  This is a database which
1083 # manages dynamic information attached to songs.
1084 #
1085 sticker_file                    "~/.mpd/sticker.sql"
1086 #
1087 ###############################################################################
1088
1089
1090 # General music daemon options ################################################
1091 #
1092 # This setting specifies the user that MPD will run as. MPD should never run as
1093 # root and you may use this setting to make MPD change its user ID after
1094 # initialization. This setting is disabled by default and MPD is run as the
1095 # current user.
1096 #
1097 #user                           "nobody"
1098 #
1099 # This setting specifies the group that MPD will run as. If not specified
1100 # primary group of user specified with "user" setting will be used (if set).
1101 # This is useful if MPD needs to be a member of group such as "audio" to
1102 # have permission to use sound card.
1103 #
1104 #group                          "nogroup"
1105 #
1106 # This setting sets the address for the daemon to listen on. Careful attention
1107 # should be paid if this is assigned to anything other then the default, any.
1108 # This setting can deny access to control of the daemon. Not effective if
1109 # systemd socket activiation is in use.
1110 #
1111 # For network
1112 #bind_to_address                "any"
1113 #
1114 # And for Unix Socket
1115 #bind_to_address                "~/.mpd/socket"
1116 #
1117 # This setting is the TCP port that is desired for the daemon to get assigned
1118 # to.
1119 #
1120 #port                           "6600"
1121 #
1122 # This setting controls the type of information which is logged. Available
1123 # setting arguments are "default", "secure" or "verbose". The "verbose" setting
1124 # argument is recommended for troubleshooting, though can quickly stretch
1125 # available resources on limited hardware storage.
1126 #
1127 #log_level                      "default"
1128 #
1129 # If you have a problem with your MP3s ending abruptly it is recommended that
1130 # you set this argument to "no" to attempt to fix the problem. If this solves
1131 # the problem, it is highly recommended to fix the MP3 files with vbrfix
1132 # (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
1133 # point gapless MP3 playback can be enabled.
1134 #
1135 #gapless_mp3_playback                   "yes"
1136 #
1137 # Setting "restore_paused" to "yes" puts MPD into pause mode instead
1138 # of starting playback after startup.
1139 #
1140 #restore_paused "no"
1141 #
1142 # This setting enables MPD to create playlists in a format usable by other
1143 # music players.
1144 #
1145 #save_absolute_paths_in_playlists       "no"
1146 #
1147 # This setting defines a list of tag types that will be extracted during the
1148 # audio file discovery process. The complete list of possible values can be
1149 # found in the user manual.
1150 #metadata_to_use        "artist,album,title,track,name,genre,date,composer,performer,disc"
1151 #
1152 # This setting enables automatic update of MPD's database when files in
1153 # music_directory are changed.
1154 #
1155 #auto_update    "yes"
1156 #
1157 # Limit the depth of the directories being watched, 0 means only watch
1158 # the music directory itself.  There is no limit by default.
1159 #
1160 #auto_update_depth "3"
1161 #
1162 ###############################################################################
1163
1164
1165 # Symbolic link behavior ######################################################
1166 #
1167 # If this setting is set to "yes", MPD will discover audio files by following
1168 # symbolic links outside of the configured music_directory.
1169 #
1170 #follow_outside_symlinks        "yes"
1171 #
1172 # If this setting is set to "yes", MPD will discover audio files by following
1173 # symbolic links inside of the configured music_directory.
1174 #
1175 #follow_inside_symlinks         "yes"
1176 #
1177 ###############################################################################
1178
1179
1180 # Zeroconf / Avahi Service Discovery ##########################################
1181 #
1182 # If this setting is set to "yes", service information will be published with
1183 # Zeroconf / Avahi.
1184 #
1185 #zeroconf_enabled               "yes"
1186 #
1187 # The argument to this setting will be the Zeroconf / Avahi unique name for
1188 # this MPD server on the network.
1189 #
1190 #zeroconf_name                  "Music Player"
1191 #
1192 ###############################################################################
1193
1194
1195 # Permissions #################################################################
1196 #
1197 # If this setting is set, MPD will require password authorization. The password
1198 # setting can be specified multiple times for different password profiles.
1199 #
1200 #password                        "password@read,add,control,admin"
1201 #
1202 # This setting specifies the permissions a user has who has not yet logged in.
1203 #
1204 #default_permissions             "read,add,control,admin"
1205 #
1206 ###############################################################################
1207
1208
1209 # Database #######################################################################
1210 #
1211
1212 #database {
1213 #       plugin "proxy"
1214 #       host "other.mpd.host"
1215 #       port "6600"
1216 #}
1217
1218 # Input #######################################################################
1219 #
1220
1221 input {
1222         plugin "curl"
1223 #       proxy "proxy.isp.com:8080"
1224 #       proxy_user "user"
1225 #       proxy_password "password"
1226 }
1227
1228 #
1229 ###############################################################################
1230
1231 # Audio Output ################################################################
1232 #
1233
1234 audio_output {
1235     type    "pulse"
1236     name    "pulse audio"
1237 }
1238
1239 audio_output {
1240     type    "fifo"
1241     name    "my_fifo"
1242     path    "/tmp/mpd.fifo"
1243     format  "44100:16:2"
1244 }
1245
1246 # MPD supports various audio output types, as well as playing through multiple
1247 # audio outputs at the same time, through multiple audio_output settings
1248 # blocks. Setting this block is optional, though the server will only attempt
1249 # autodetection for one sound card.
1250 #
1251 # An example of an ALSA output:
1252 #
1253 #audio_output {
1254 #       type            "alsa"
1255 #       name            "My ALSA Device"
1256 ##      device          "hw:0,0"        # optional
1257 ##      mixer_type      "hardware"      # optional
1258 ##      mixer_device    "default"       # optional
1259 ##      mixer_control   "PCM"           # optional
1260 ##      mixer_index     "0"             # optional
1261 #}
1262 #
1263 # An example of an OSS output:
1264 #
1265 #audio_output {
1266 #       type            "oss"
1267 #       name            "My OSS Device"
1268 ##      device          "/dev/dsp"      # optional
1269 ##      mixer_type      "hardware"      # optional
1270 ##      mixer_device    "/dev/mixer"    # optional
1271 ##      mixer_control   "PCM"           # optional
1272 #}
1273 #
1274 # An example of a shout output (for streaming to Icecast):
1275 #
1276 #audio_output {
1277 #       type            "shout"
1278 #       encoder         "vorbis"                # optional
1279 #       name            "My Shout Stream"
1280 #       host            "localhost"
1281 #       port            "8000"
1282 #       mount           "/mpd.ogg"
1283 #       password        "hackme"
1284 #       quality         "5.0"
1285 #       bitrate         "128"
1286 #       format          "44100:16:1"
1287 ##      protocol        "icecast2"              # optional
1288 ##      user            "source"                # optional
1289 ##      description     "My Stream Description" # optional
1290 ##      url             "http://example.com"    # optional
1291 ##      genre           "jazz"                  # optional
1292 ##      public          "no"                    # optional
1293 ##      timeout         "2"                     # optional
1294 ##      mixer_type      "software"              # optional
1295 #}
1296 #
1297 # An example of a recorder output:
1298 #
1299 #audio_output {
1300 #       type            "recorder"
1301 #       name            "My recorder"
1302 #       encoder         "vorbis"                # optional, vorbis or lame
1303 #       path            "/var/lib/mpd/recorder/mpd.ogg"
1304 ##      quality         "5.0"                   # do not define if bitrate is defined
1305 #       bitrate         "128"                   # do not define if quality is defined
1306 #       format          "44100:16:1"
1307 #}
1308 #
1309 # An example of a httpd output (built-in HTTP streaming server):
1310 #
1311 #audio_output {
1312 #       type            "httpd"
1313 #       name            "My HTTP Stream"
1314 #       encoder         "vorbis"                # optional, vorbis or lame
1315 #       port            "8000"
1316 #       bind_to_address "0.0.0.0"               # optional, IPv4 or IPv6
1317 ##      quality         "5.0"                   # do not define if bitrate is defined
1318 #       bitrate         "128"                   # do not define if quality is defined
1319 #       format          "44100:16:1"
1320 #       max_clients     "0"                     # optional 0=no limit
1321 #}
1322 #
1323 # An example of a pulseaudio output (streaming to a remote pulseaudio server)
1324 #
1325 #audio_output {
1326 #       type            "pulse"
1327 #       name            "My Pulse Output"
1328 ##      server          "remote_server"         # optional
1329 ##      sink            "remote_server_sink"    # optional
1330 #}
1331 #
1332 # An example of a winmm output (Windows multimedia API).
1333 #
1334 #audio_output {
1335 #       type            "winmm"
1336 #       name            "My WinMM output"
1337 ##      device          "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1338 #               or
1339 ##      device          "0"             # optional
1340 ##      mixer_type      "hardware"      # optional
1341 #}
1342 #
1343 # An example of an openal output.
1344 #
1345 #audio_output {
1346 #       type            "openal"
1347 #       name            "My OpenAL output"
1348 ##      device          "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1349 #}
1350 #
1351 # An example of an sndio output.
1352 #
1353 #audio_output {
1354 #       type            "sndio"
1355 #       name            "sndio output"
1356 #       mixer_type      "software"
1357 #}
1358 #
1359 # An example of an OS X output:
1360 #
1361 #audio_output {
1362 #       type            "osx"
1363 #       name            "My OS X Device"
1364 ##      device          "Built-in Output"       # optional
1365 ##      channel_map      "-1,-1,0,1"    # optional
1366 #}
1367 #
1368 ## Example "pipe" output:
1369 #
1370 #audio_output {
1371 #       type            "pipe"
1372 #       name            "my pipe"
1373 #       command         "aplay -f cd 2>/dev/null"
1374 ## Or if you're want to use AudioCompress
1375 #       command         "AudioCompress -m | aplay -f cd 2>/dev/null"
1376 ## Or to send raw PCM stream through PCM:
1377 #       command         "nc example.org 8765"
1378 #       format          "44100:16:2"
1379 #}
1380 #
1381 ## An example of a null output (for no audio output):
1382 #
1383 #audio_output {
1384 #       type            "null"
1385 #       name            "My Null Output"
1386 #       mixer_type      "none"                  # optional
1387 #}
1388 #
1389 ###############################################################################
1390
1391
1392 # Normalization automatic volume adjustments ##################################
1393 #
1394 # This setting specifies the type of ReplayGain to use. This setting can have
1395 # the argument "off", "album", "track" or "auto". "auto" is a special mode that
1396 # chooses between "track" and "album" depending on the current state of
1397 # random playback. If random playback is enabled then "track" mode is used.
1398 # See <http://www.replaygain.org> for more details about ReplayGain.
1399 # This setting is off by default.
1400 #
1401 #replaygain                     "album"
1402 #
1403 # This setting sets the pre-amp used for files that have ReplayGain tags. By
1404 # default this setting is disabled.
1405 #
1406 #replaygain_preamp              "0"
1407 #
1408 # This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1409 # By default this setting is disabled.
1410 #
1411 #replaygain_missing_preamp      "0"
1412 #
1413 # This setting enables or disables ReplayGain limiting.
1414 # MPD calculates actual amplification based on the ReplayGain tags
1415 # and replaygain_preamp / replaygain_missing_preamp setting.
1416 # If replaygain_limit is enabled MPD will never amplify audio signal
1417 # above its original level. If replaygain_limit is disabled such amplification
1418 # might occur. By default this setting is enabled.
1419 #
1420 #replaygain_limit               "yes"
1421 #
1422 # This setting enables on-the-fly normalization volume adjustment. This will
1423 # result in the volume of all playing audio to be adjusted so the output has
1424 # equal "loudness". This setting is disabled by default.
1425 #
1426 #volume_normalization           "no"
1427 #
1428 ###############################################################################
1429
1430 # Character Encoding ##########################################################
1431 #
1432 # If file or directory names do not display correctly for your locale then you
1433 # may need to modify this setting.
1434 #
1435 #filesystem_charset             "UTF-8"
1436 #
1437 ###############################################################################
1438 #+end_src
1439
1440 ** msmtp
1441 :PROPERTIES:
1442 :header-args+: :tangle ~/.msmtprc
1443 :END:
1444
1445 #+begin_src conf
1446 # Set default values for all following accounts.
1447 defaults
1448 port 587
1449 tls on
1450 auth on
1451 #tls_trust_file /etc/ssl/certs/ca-certificates.crt
1452 logfile ~/.msmtp.log
1453
1454 # aminb
1455 account aminb
1456 host nix.aminb.org
1457 tls_fingerprint 65:DD:B8:32:D8:CD:F1:DC:B6:34:EE:35:04:18:AC:09:F3:1D:6D:20:F2:4A:E2:BD:64:48:B7:1F:90:BD:C4:BA
1458 tls_starttls on
1459 from amin@aminb.org
1460 user amin@aminb.org
1461 passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
1462
1463 # gnu
1464 account gnu
1465 host fencepost.gnu.org
1466 # use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1467 tls_fingerprint 28:70:42:76:1C:EC:91:5F:D1:B3:27:A1:CD:3B:32:A4:8B:0B:DC:3A:CD:CA:F6:6F:E4:61:BA:69:D7:4D:0D:0B
1468 tls_starttls on
1469 from aminb@gnu.org
1470 user aminb
1471 passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
1472
1473 # uwaterloo
1474 account uwaterloo
1475 host connect.uwaterloo.ca
1476 tls_starttls on
1477 from abandali@uwaterloo.ca
1478 user abandali
1479 passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
1480 tls_trust_file /etc/ssl/certs/ca-certificates.crt
1481
1482 # uwaterloo (friendly address)
1483 account uwaterloo-friendly : uwaterloo
1484 from amin.bandali@uwaterloo.ca
1485
1486 # Set a default account
1487 account default : aminb
1488 #+end_src
1489
1490 ** ncmpcpp
1491
1492 *** config
1493 :PROPERTIES:
1494 :header-args+: :tangle ~/.ncmpcpp/config
1495 :END:
1496
1497 #+begin_src conf :tangle no
1498 ##############################################################
1499 ## This is the example configuration file. Copy it to       ##
1500 ## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
1501 ## and set up your preferences.                             ##
1502 ##############################################################
1503 #
1504 ##### directories ######
1505 ##
1506 ## Directory for storing ncmpcpp related files.
1507 ## Changing it is useful if you want to store
1508 ## everything somewhere else and provide command
1509 ## line setting for alternative location to config
1510 ## file which defines that while launching ncmpcpp.
1511 ##
1512 #
1513 ncmpcpp_directory = ~/.ncmpcpp
1514 #
1515 ##
1516 ## Directory for storing downloaded lyrics. It
1517 ## defaults to ~/.lyrics since other MPD clients
1518 ## (eg. ncmpc) also use that location.
1519 ##
1520 #
1521 #lyrics_directory = ~/.lyrics
1522 #
1523 ##### connection settings #####
1524 #
1525 #mpd_host = localhost
1526 #
1527 #mpd_port = 6600
1528 #
1529 #mpd_connection_timeout = 5
1530 #
1531 ## Needed for tag editor and file operations to work.
1532 ##
1533 mpd_music_dir = ~/usr/music
1534 #
1535 #mpd_crossfade_time = 5
1536 #
1537 ##### music visualizer #####
1538 ##
1539 ## Note: In order to make music visualizer work you'll
1540 ## need to use mpd fifo output, whose format parameter
1541 ## has to be set to 44100:16:1 for mono visualization
1542 ## or 44100:16:2 for stereo visualization. Example
1543 ## configuration (it has to be put into mpd.conf):
1544 ##
1545 ## audio_output {
1546 ##        type            "fifo"
1547 ##        name            "Visualizer feed"
1548 ##        path            "/tmp/mpd.fifo"
1549 ##        format          "44100:16:2"
1550 ## }
1551 ##
1552 #
1553 visualizer_fifo_path = /tmp/mpd.fifo
1554 #
1555 ##
1556 ## Note: Below parameter is needed for ncmpcpp
1557 ## to determine which output provides data for
1558 ## visualizer and thus allow syncing between
1559 ## visualization and sound as currently there
1560 ## are some problems with it.
1561 ##
1562 #
1563 visualizer_output_name = my fifo
1564 #
1565 ##
1566 ## If you set format to 44100:16:2, make it 'yes'.
1567 ##
1568 visualizer_in_stereo = yes
1569 #
1570 ##
1571 ## Multiply received samples by given value. Very
1572 ## useful for proper visualization of quiet music.
1573 ##
1574 #visualizer_sample_multiplier = 1
1575 #
1576 ##
1577 ## Note: Below parameter defines how often ncmpcpp
1578 ## has to "synchronize" visualizer and audio outputs.
1579 ## 30 seconds is optimal value, but if you experience
1580 ## synchronization problems, set it to lower value.
1581 ## Keep in mind that sane values start with >=10.
1582 ##
1583 #
1584 visualizer_sync_interval = 30
1585 #
1586 ##
1587 ## Note: To enable spectrum frequency visualization
1588 ## you need to compile ncmpcpp with fftw3 support.
1589 ##
1590 #
1591 ## Available values: spectrum, wave, wave_filled, ellipse.
1592 ##
1593 visualizer_type = spectrum
1594 #
1595 #visualizer_look = ●▮
1596 visualizer_look = "●•"
1597 #
1598 #visualizer_color = blue, cyan, green, yellow, magenta, red
1599 #
1600 ## Alternative subset of 256 colors for terminals that support it.
1601 ##
1602 #visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
1603 #
1604 ##### system encoding #####
1605 ##
1606 ## ncmpcpp should detect your charset encoding
1607 ## but if it failed to do so, you can specify
1608 ## charset encoding you are using here.
1609 ##
1610 ## Note: You can see whether your ncmpcpp build
1611 ## supports charset detection by checking output
1612 ## of `ncmpcpp --version`.
1613 ##
1614 ## Note: Since MPD uses UTF-8 by default, setting
1615 ## this option makes sense only if your encoding
1616 ## is different.
1617 ##
1618 #
1619 #system_encoding = ""
1620 #
1621 ##### delays #####
1622 #
1623 ## Time of inactivity (in seconds) after playlist
1624 ## highlighting will be disabled (0 = always on).
1625 ##
1626 #playlist_disable_highlight_delay = 5
1627 #
1628 ## Defines how long messages are supposed to be visible.
1629 ##
1630 #message_delay_time = 5
1631 #
1632 ##### song format #####
1633 ##
1634 ## For a song format you can use:
1635 ##
1636 ## %l - length
1637 ## %f - filename
1638 ## %D - directory
1639 ## %a - artist
1640 ## %A - album artist
1641 ## %t - title
1642 ## %b - album
1643 ## %y - date
1644 ## %n - track number (01/12 -> 01)
1645 ## %N - full track info (01/12 -> 01/12)
1646 ## %g - genre
1647 ## %c - composer
1648 ## %p - performer
1649 ## %d - disc
1650 ## %C - comment
1651 ## %P - priority
1652 ## $R - begin right alignment
1653 ##
1654 ## If you want to make sure that a part of the format is displayed
1655 ## only when certain tags are present, you can archieve it by
1656 ## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
1657 ## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
1658 ## It is also possible to define a list of alternatives by providing
1659 ## several groups and separating them with '|', e.g. '{%t}|{%f}'
1660 ## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
1661 ## present.
1662 ##
1663 ## Note: If you want to set limit on maximal length of a tag, just
1664 ## put the appropriate number between % and character that defines
1665 ## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
1666 ##
1667 ## In addition, formats support markers used for text attributes.
1668 ## They are followed by character '$'. After that you can put:
1669 ##
1670 ## - 0 - default window color (discards all other colors)
1671 ## - 1 - black
1672 ## - 2 - red
1673 ## - 3 - green
1674 ## - 4 - yellow
1675 ## - 5 - blue
1676 ## - 6 - magenta
1677 ## - 7 - cyan
1678 ## - 8 - white
1679 ## - 9 - end of current color
1680 ## - b - bold text
1681 ## - u - underline text
1682 ## - r - reverse colors
1683 ## - a - use alternative character set
1684 ##
1685 ## If you don't want to use a non-color attribute anymore, just put it
1686 ## again, but this time insert character '/' between '$' and attribute
1687 ## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
1688 ## or filename with reversed colors.
1689 ##
1690 ## If you want to use 256 colors and/or background colors in formats
1691 ## (the naming scheme is described below in section about color
1692 ## definitions), it can be done with the syntax $(COLOR), e.g. to set
1693 ## the artist tag to one of the non-standard colors and make it have
1694 ## yellow background, you need to write $(197_yellow)%a$(end). Note
1695 ## that for standard colors this is interchangable with attributes
1696 ## listed above.
1697 ##
1698 ## Note: colors can be nested.
1699 ##
1700 #
1701 #song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
1702 #
1703 #song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
1704 #
1705 #song_library_format = {%n - }{%t}|{%f}
1706 #
1707 #
1708 #alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
1709 #
1710 #alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
1711 #
1712 #now_playing_prefix = $b
1713 #
1714 #now_playing_suffix = $/b
1715 #
1716 #browser_playlist_prefix = "$2playlist$9 "
1717 #
1718 #selected_item_prefix = $6
1719 #
1720 #selected_item_suffix = $9
1721 #
1722 #modified_item_prefix = $3> $9
1723 #
1724 ##
1725 ## Note: attributes are not supported for the following variables.
1726 ##
1727 #song_window_title_format = {%a - }{%t}|{%f}
1728 ##
1729 ## Note: Below variables are used for sorting songs in browser.
1730 ## The sort mode determines how songs are sorted, and can be used
1731 ## in combination with a sort format to specify a custom sorting format.
1732 ## Available values for browser_sort_mode are "name", "mtime", "format"
1733 ## and "noop".
1734 ##
1735 #
1736 #browser_sort_mode = name
1737 #
1738 #browser_sort_format = {%a - }{%t}|{%f} {(%l)}
1739 #
1740 ##### columns settings #####
1741 ##
1742 ## syntax of song columns list format is "column column etc."
1743 ##
1744 ## - syntax for each column is:
1745 ##
1746 ## (width of the column)[color of the column]{displayed tag}
1747 ##
1748 ## Note: Width is by default in %, if you want a column to
1749 ## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
1750 ## will be the column that take 10% of screen (so the real width
1751 ## will depend on actual screen size), whereas (10f)[white]{a}
1752 ## will take 10 terminal cells, no matter how wide the screen is.
1753 ##
1754 ## - color is optional (if you want the default one,
1755 ##   leave the field empty).
1756 ##
1757 ## Note: You can give a column additional attributes by putting appropriate
1758 ## character after displayed tag character. Available attributes are:
1759 ##
1760 ## - r - column will be right aligned
1761 ## - E - if tag is empty, empty tag marker won't be displayed
1762 ##
1763 ## You can also:
1764 ##
1765 ## - give a column custom name by putting it after attributes,
1766 ##   separated with character ':', e.g. {lr:Length} gives you
1767 ##   right aligned column of lengths named "Length".
1768 ##
1769 ## - define sequence of tags, that have to be displayed in case
1770 ##   predecessor is empty in a way similar to the one in classic
1771 ##   song format, i.e. using '|' character, e.g. {a|c|p:Owner}
1772 ##   creates column named "Owner" that tries to display artist
1773 ##   tag and then composer and performer if previous ones are
1774 ##   not available.
1775 ##
1776 #
1777 #song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
1778 #
1779 ##### various settings #####
1780 #
1781 ##
1782 ## Note: Custom command that will be executed each
1783 ## time song changes. Useful for notifications etc.
1784 ##
1785 #execute_on_song_change = ""
1786 #
1787 #playlist_show_mpd_host = no
1788 #
1789 #playlist_show_remaining_time = no
1790 #
1791 #playlist_shorten_total_times = no
1792 #
1793 #playlist_separate_albums = no
1794 #
1795 ##
1796 ## Note: Possible display modes: classic, columns.
1797 ##
1798 #playlist_display_mode = columns
1799 #
1800 #browser_display_mode = classic
1801 #
1802 #search_engine_display_mode = classic
1803 #
1804 #playlist_editor_display_mode = classic
1805 #
1806 #discard_colors_if_item_is_selected = yes
1807 #
1808 #incremental_seeking = yes
1809 #
1810 #seek_time = 1
1811 #
1812 #volume_change_step = 2
1813 #
1814 #autocenter_mode = no
1815 #
1816 #centered_cursor = no
1817 #
1818 ##
1819 ## Note: You can specify third character which will
1820 ## be used to build 'empty' part of progressbar.
1821 ##
1822 #progressbar_look = =>
1823 progressbar_look = "─╼╶"
1824 #progressbar_look = "─⊙╶"
1825 #
1826 #progressbar_boldness = yes
1827 #
1828 ## Available values: database, playlist.
1829 ##
1830 #default_place_to_search_in = database
1831 #
1832 ## Available values: classic, alternative.
1833 ##
1834 #user_interface = classic
1835 #
1836 #data_fetching_delay = yes
1837 #
1838 ## Available values: artist, album_artist, date, genre, composer, performer.
1839 ##
1840 #media_library_primary_tag = artist
1841 #
1842 ## Available values: wrapped, normal.
1843 ##
1844 #default_find_mode = wrapped
1845 #
1846 #default_tag_editor_pattern = %n - %t
1847 #
1848 #header_visibility = yes
1849 #
1850 #statusbar_visibility = yes
1851 #
1852 #titles_visibility = yes
1853 #
1854 #header_text_scrolling = yes
1855 #
1856 #cyclic_scrolling = no
1857 #
1858 #lines_scrolled = 2
1859 #
1860 #follow_now_playing_lyrics = no
1861 #
1862 #fetch_lyrics_for_current_song_in_background = no
1863 #
1864 #store_lyrics_in_song_dir = no
1865 #
1866 #generate_win32_compatible_filenames = yes
1867 #
1868 #allow_for_physical_item_deletion = no
1869 #
1870 ##
1871 ## Note: If you set this variable, ncmpcpp will try to
1872 ## get info from last.fm in language you set and if it
1873 ## fails, it will fall back to english. Otherwise it will
1874 ## use english the first time.
1875 ##
1876 ## Note: Language has to be expressed as an ISO 639 alpha-2 code.
1877 ##
1878 #lastfm_preferred_language = en
1879 #
1880 #show_hidden_files_in_local_browser = no
1881 #
1882 ##
1883 ## How shall screen switcher work?
1884 ##
1885 ## - "previous" - switch between the current and previous screen.
1886 ## - "screen1,...,screenN" - switch between given sequence of screens.
1887 ##
1888 ## Screens available for use: help, playlist, browser, search_engine,
1889 ## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
1890 ##
1891 #screen_switcher_mode = playlist, browser
1892 #
1893 ##
1894 ## Note: You can define startup screen
1895 ## by choosing screen from the list above.
1896 ##
1897 #startup_screen = playlist
1898 #
1899 ##
1900 ## Note: You can define startup slave screen
1901 ## by choosing screen from the list above or
1902 ## an empty value for no slave screen.
1903 ##
1904 #startup_slave_screen = ""
1905 #
1906 #startup_slave_screen_focus = no
1907 #
1908 ##
1909 ## Default width of locked screen (in %).
1910 ## Acceptable values are from 20 to 80.
1911 ##
1912 #
1913 #locked_screen_width_part = 50
1914 #
1915 #ask_for_locked_screen_width_part = yes
1916 #
1917 #jump_to_now_playing_song_at_start = yes
1918 #
1919 #ask_before_clearing_playlists = yes
1920 #
1921 #clock_display_seconds = no
1922 #
1923 #display_volume_level = yes
1924 #
1925 #display_bitrate = no
1926 #
1927 #display_remaining_time = no
1928 #
1929 ## Available values: none, basic, extended, perl.
1930 ##
1931 #regular_expressions = perl
1932 #
1933 ##
1934 ## Note: If below is enabled, ncmpcpp will ignore leading
1935 ## "The" word while sorting items in browser, tags in
1936 ## media library, etc.
1937 ##
1938 #ignore_leading_the = no
1939 #
1940 #block_search_constraints_change_if_items_found = yes
1941 #
1942 #mouse_support = yes
1943 #
1944 #mouse_list_scroll_whole_page = yes
1945 #
1946 #empty_tag_marker = <empty>
1947 #
1948 #tags_separator = " | "
1949 #
1950 #tag_editor_extended_numeration = no
1951 #
1952 #media_library_sort_by_mtime = no
1953 #
1954 #enable_window_title = yes
1955 #
1956 ##
1957 ## Note: You can choose default search mode for search
1958 ## engine. Available modes are:
1959 ##
1960 ## - 1 - use mpd built-in searching (no regexes, pattern matching)
1961 ## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
1962 ##       but if your mpd is on a remote machine, downloading big database
1963 ##       to process it can take a while
1964 ## - 3 - match only exact values (this mode uses mpd function for searching
1965 ##       in database and local one for searching in current playlist)
1966 ##
1967 #
1968 #search_engine_default_search_mode = 1
1969 #
1970 #external_editor = nano
1971 #
1972 ## Note: set to yes if external editor is a console application.
1973 ##
1974 #use_console_editor = yes
1975 #
1976 ##### colors definitions #####
1977 ##
1978 ## It is possible to set a background color by setting a color
1979 ## value "<foreground>_<background>", e.g. red_black will set
1980 ## foregound color to red and background color to black.
1981 ##
1982 ## In addition, for terminals that support 256 colors it
1983 ## is possible to set one of them by using a number in range
1984 ## [1, 256] instead of color name, e.g. numerical value
1985 ## corresponding to red_black is 2_1. To find out if the
1986 ## terminal supports 256 colors, run ncmpcpp and check out
1987 ## the bottom of the help screen for list of available colors
1988 ## and their numerical values.
1989 ##
1990 ## Note: due to technical limitations of ncurses, if 256 colors
1991 ## are used, it is possible to either use only the colors with
1992 ## default background color, or all pairs from 1_1 up to 254_127,
1993 ## depending on the ncurses version used.
1994 ##
1995 #
1996 #colors_enabled = yes
1997 #
1998 #empty_tag_color = cyan
1999 #
2000 #header_window_color = default
2001 #
2002 #volume_color = default
2003 #
2004 #state_line_color = default
2005 #
2006 #state_flags_color = default
2007 #
2008 #main_window_color = yellow
2009 #
2010 #color1 = white
2011 #
2012 #color2 = green
2013 #
2014 #main_window_highlight_color = yellow
2015 #
2016 #progressbar_color = black
2017 #
2018 #progressbar_elapsed_color = green
2019 #
2020 #statusbar_color = default
2021 #
2022 #alternative_ui_separator_color = black
2023 #
2024 #active_column_color = red
2025 #
2026 #window_border_color = green
2027 #
2028 #active_window_border = red
2029 #
2030 #+end_src
2031
2032 *** bindings
2033 :PROPERTIES:
2034 :header-args+: :tangle ~/.ncmpcpp/bindings
2035 :END:
2036
2037 #+begin_src conf :tangle no
2038 def_key "j"
2039     scroll_down
2040 def_key "k"
2041     scroll_up
2042
2043 def_key "ctrl-u"
2044     page_up
2045 def_key "ctrl-d"
2046     page_down
2047
2048 def_key "h"
2049     previous_column
2050 def_key "l"
2051     next_column
2052
2053 def_key "."
2054     show_lyrics
2055
2056 def_key "n"
2057     next_found_item
2058 def_key "N"
2059     previous_found_item
2060
2061 def_key "J"
2062     move_sort_order_down
2063 def_key "K"
2064     move_sort_order_up
2065 #+end_src
2066
2067 ** notmuch
2068
2069 *** notmuch-config
2070 :PROPERTIES:
2071 :header-args+: :tangle ~/.notmuch-config
2072 :END:
2073
2074 #+begin_src conf
2075 # .notmuch-config - Configuration file for the notmuch mail system
2076 #
2077 # For more information about notmuch, see https://notmuchmail.org
2078
2079 # Database configuration
2080 #
2081 # The only value supported here is 'path' which should be the top-level
2082 # directory where your mail currently exists and to where mail will be
2083 # delivered in the future. Files should be individual email messages.
2084 # Notmuch will store its database within a sub-directory of the path
2085 # configured here named ".notmuch".
2086 #
2087 [database]
2088 path=/home/amin/mail
2089
2090 # User configuration
2091 #
2092 # Here is where you can let notmuch know how you would like to be
2093 # addressed. Valid settings are
2094 #
2095 #       name            Your full name.
2096 #       primary_email   Your primary email address.
2097 #       other_email     A list (separated by ';') of other email addresses
2098 #                       at which you receive email.
2099 #
2100 # Notmuch will use the various email addresses configured here when
2101 # formatting replies. It will avoid including your own addresses in the
2102 # recipient list of replies, and will set the From address based on the
2103 # address to which the original email was addressed.
2104 #
2105 [user]
2106 name=Amin Bandali
2107 primary_email=amin@aminb.org
2108 other_email=abandali@uwaterloo.ca;amin.bandali@uwaterloo.ca;aminb@gnu.org;
2109
2110 # Configuration for "notmuch new"
2111 #
2112 # The following options are supported here:
2113 #
2114 #       tags    A list (separated by ';') of the tags that will be
2115 #               added to all messages incorporated by "notmuch new".
2116 #
2117 #       ignore  A list (separated by ';') of file and directory names
2118 #               that will not be searched for messages by "notmuch new".
2119 #
2120 #               NOTE: *Every* file/directory that goes by one of those
2121 #               names will be ignored, independent of its depth/location
2122 #               in the mail store.
2123 #
2124 [new]
2125 tags=new;
2126 #tags=unread;inbox;
2127 ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
2128
2129 # Search configuration
2130 #
2131 # The following option is supported here:
2132 #
2133 #       exclude_tags
2134 #               A ;-separated list of tags that will be excluded from
2135 #               search results by default.  Using an excluded tag in a
2136 #               query will override that exclusion.
2137 #
2138 [search]
2139 exclude_tags=deleted;spam;
2140
2141 # Maildir compatibility configuration
2142 #
2143 # The following option is supported here:
2144 #
2145 #       synchronize_flags      Valid values are true and false.
2146 #
2147 #       If true, then the following maildir flags (in message filenames)
2148 #       will be synchronized with the corresponding notmuch tags:
2149 #
2150 #               Flag    Tag
2151 #               ----    -------
2152 #               D       draft
2153 #               F       flagged
2154 #               P       passed
2155 #               R       replied
2156 #               S       unread (added when 'S' flag is not present)
2157 #
2158 #       The "notmuch new" command will notice flag changes in filenames
2159 #       and update tags, while the "notmuch tag" and "notmuch restore"
2160 #       commands will notice tag changes and update flags in filenames
2161 #
2162 [maildir]
2163 synchronize_flags=true
2164
2165 # Cryptography related configuration
2166 #
2167 # The following option is supported here:
2168 #
2169 #       gpg_path
2170 #               binary name or full path to invoke gpg.
2171 #
2172 [crypto]
2173 gpg_path=gpg
2174 #+end_src
2175
2176 *** pre-new hook
2177 :PROPERTIES:
2178 :header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
2179 :END:
2180
2181 #+begin_src sh
2182 touch /tmp/gnusieve.log
2183 sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
2184              -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
2185 #+end_src
2186
2187 *** post-new hook
2188 :PROPERTIES:
2189 :header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
2190 :END:
2191
2192 #+begin_src sh
2193 # apply sent tag to messages sent by me
2194 notmuch tag -new +sent -- from:amin@aminb.org or from:aminb@gnu.org or from:abandali@uwaterloo.ca or from:amin.bandali@uwaterloo.ca
2195
2196 # initial tagging
2197 notmuch tag -latest -- tag:latest
2198 notmuch tag +inbox +unread +latest -new -- tag:new
2199
2200
2201 # apply tags to lists
2202
2203 # <aminb>
2204 notmuch tag -inbox +lists/~sircmpwn/srht-admins   -- folder:amin/lists/~sircmpwn/srht-admins
2205 notmuch tag -inbox +lists/~sircmpwn/srht-announce -- folder:amin/lists/~sircmpwn/srht-announce
2206 notmuch tag -inbox +lists/~sircmpwn/srht-dev      -- folder:amin/lists/~sircmpwn/srht-dev
2207 notmuch tag -inbox +lists/~sircmpwn/srht-discuss  -- folder:amin/lists/~sircmpwn/srht-discuss
2208
2209 notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
2210 notmuch tag -inbox +lists/haskell-weekly   -- folder:amin/lists/haskell-weekly
2211
2212 notmuch tag -inbox +pay -- folder:amin/pay
2213 # </aminb>
2214
2215 # <uw>
2216 notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
2217 notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
2218
2219 notmuch tag -inbox +lists/clvsingle        -- folder:uwaterloo/lists/Clvsingle
2220 notmuch tag -inbox +lists/gsa              -- folder:uwaterloo/lists/GSA
2221 notmuch tag -inbox +lists/math-grad        -- folder:uwaterloo/lists/Math-grad
2222 notmuch tag -inbox +lists/scs-grads        -- folder:uwaterloo/lists/scs-grads
2223 notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
2224 # </uw>
2225
2226 # <gnu>
2227 notmuch tag -inbox +lists/emacs-devel       -- folder:gnu/l/emacs-devel
2228 notmuch tag -inbox +lists/emacs-orgmode     -- folder:gnu/l/emacs-orgmode
2229 notmuch tag -inbox +lists/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
2230 notmuch tag -inbox +lists/fencepost-users   -- folder:gnu/l/fencepost-users
2231 notmuch tag -inbox +lists/guix-devel        -- folder:gnu/l/guix-devel
2232 notmuch tag -inbox +lists/guile-devel       -- folder:gnu/l/guile-devel
2233 notmuch tag -inbox +lists/help-gnu-emacs    -- folder:gnu/l/help-gnu-emacs
2234 notmuch tag -inbox +lists/info-gnu-emacs    -- folder:gnu/l/info-gnu-emacs
2235 notmuch tag -inbox +lists/www-commits       -- folder:gnu/l/www-commits
2236 notmuch tag -inbox +lists/www-discuss       -- folder:gnu/l/www-discuss
2237 notmuch tag -inbox +webmasters              -- folder:gnu/webmasters
2238
2239 notmuch tag -inbox +lists/deepspec          -- folder:gnu/l/deepspec
2240 notmuch tag -inbox +lists/haskell-cafe      -- folder:gnu/l/haskell-cafe
2241 notmuch tag -inbox +lists/haskell-art       -- folder:gnu/l/haskell-art
2242 notmuch tag -inbox +lists/notmuch           -- folder:gnu/l/notmuch
2243 # </gnu>
2244
2245 notmuch tag -inbox -unread +archive/notmuch     -- path:archive/notmuch/**
2246 notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**
2247 #+end_src
2248
2249 *** notmuch.service
2250 :PROPERTIES:
2251 :header-args+: :tangle ~/.config/systemd/user/notmuch.service
2252 :END:
2253
2254 #+begin_src conf :tangle no
2255 [Unit]
2256 Description=notmuch service
2257
2258 [Service]
2259 Type=oneshot
2260 ExecStart=/usr/bin/notmuch new
2261 StandardOutput=syslog
2262 StandardError=syslog
2263 #+end_src
2264
2265 *** notmuch.timer
2266 :PROPERTIES:
2267 :header-args+: :tangle ~/.config/systemd/user/notmuch.timer
2268 :END:
2269
2270 #+begin_src conf :tangle no
2271 [Unit]
2272 Description=notmuch timer
2273
2274 [Timer]
2275 OnCalendar=*:0/5
2276 Persistent=true
2277 Unit=notmuch.service
2278
2279 [Install]
2280 WantedBy=timers.target
2281 #+end_src
2282
2283 ** offlineimap
2284
2285 *** offlineimaprc
2286 :PROPERTIES:
2287 :header-args+: :tangle ~/.offlineimaprc
2288 :END:
2289
2290 #+begin_src conf :tangle no
2291 [general]
2292 pythonfile = ~/.offlineimap.py
2293 accounts = Gmail, aminb
2294 maxsyncaccounts = 3
2295
2296 [Account Gmail]
2297 localrepository = GmailL
2298 remoterepository = GmailR
2299
2300 [Account aminb]
2301 localrepository = aminbL
2302 remoterepository = aminbR
2303
2304 [Repository GmailL]
2305 type = Maildir
2306 localfolders = ~/Maildir/Gmail
2307
2308 [Repository GmailR]
2309 type = IMAP
2310 remotehost = imap.gmail.com
2311 remoteusereval = mailuser("gmail")
2312 remotepasseval = mailpasswd("gmail")
2313 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2314 ssl = yes
2315 folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
2316 maxconnections = 1
2317 realdelete = no
2318
2319 [Repository aminbL]
2320 type = Maildir
2321 localfolders = ~/Maildir/aminb
2322
2323 [Repository aminbR]
2324 type = IMAP
2325 remotehost = mail.aminb.org
2326 remoteusereval = mailuser("aminb")
2327 remotepasseval = mailpasswd("aminb")
2328 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2329 ssl = yes
2330 folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
2331 maxconnections = 1
2332 realdelete = no
2333 #+end_src
2334
2335 *** offlineimap.py
2336 :PROPERTIES:
2337 :header-args+: :tangle ~/.offlineimap.py
2338 :END:
2339
2340 #+begin_src python :tangle no
2341 import os
2342 import subprocess
2343
2344 def mailpasswd(acct):
2345     acct = os.path.basename(acct)
2346     path = "/home/amin/.passwd/%s.gpg" % acct
2347     args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
2348     try:
2349         return subprocess.check_output(args).strip()
2350     except subprocess.CalledProcessError:
2351         return ""
2352
2353 def mailuser(acct):
2354     acct = os.path.basename(acct)
2355     path = "/home/amin/.passwd/%s" % acct
2356     args = ["cat", path]
2357     try:
2358         return subprocess.check_output(args).strip()
2359     except subprocess.CalledProcessError:
2360         return ""
2361
2362 def prime_gpg_agent():
2363   ret = False
2364   i = 1
2365   while not ret:
2366     ret = (mailpasswd("prime") == "prime")
2367     if i > 2:
2368       from offlineimap.ui import getglobalui
2369       sys.stderr.write("Error reading in passwords. Terminating.\n")
2370       getglobalui().terminate()
2371     i += 1
2372   return ret
2373
2374 prime_gpg_agent()
2375 #+end_src
2376
2377 ** pigeonhole
2378 *** gnu.sieve
2379 :PROPERTIES:
2380 :header-args+: :tangle ~/sieve/gnu.sieve :comments none
2381 :END:
2382
2383 #+begin_src conf
2384 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags", "include" ];
2385
2386 if anyof (
2387   address :is "from" "webmasters@gnu.org",
2388   address :is "from" "webmasters-comment@gnu.org") {
2389   fileinto :create "webmasters";
2390   stop;
2391 }
2392
2393 include :personal "lists";
2394 #+end_src
2395
2396 *** lists.sieve
2397 :PROPERTIES:
2398 :header-args+: :tangle ~/sieve/lists.sieve :comments none
2399 :END:
2400
2401 #+begin_src conf
2402 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags",
2403  "include" ];
2404
2405 if anyof (
2406     header :contains "list-id" "<emacs-devel.gnu.org>",
2407     header :contains "list-id" "<emacs-orgmode.gnu.org>",
2408     header :contains "list-id" "<emacsconf-discuss.gnu.org>",
2409     header :contains "list-id" "<fencepost-users.gnu.org>",
2410     header :contains "list-id" "<guix-devel.gnu.org>",
2411     header :contains "list-id" "<guile-devel.gnu.org>",
2412     header :contains "list-id" "<help-gnu-emacs.gnu.org>",
2413     header :contains "list-id" "<info-gnu-emacs.gnu.org>",
2414     header :contains "list-id" "<www-commits.gnu.org>",
2415     header :contains "list-id" "<www-discuss.gnu.org>",
2416     header :contains "list-id" "<deepspec.lists.cs.princeton.edu>",
2417     header :contains "list-id" "<haskell-cafe.haskell.org>",
2418     header :contains "list-id" "<haskell-art.we.lurk.org>",
2419     header :contains "list-id" "<notmuch.notmuchmail.org>") {
2420     if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
2421         set :lower "listname" "${1}";
2422         fileinto :create "l/${listname}";
2423     }
2424 }
2425 #+end_src
2426
2427 ** polybar
2428
2429 *** config
2430 :PROPERTIES:
2431 :header-args+: :tangle ~/.config/polybar/config
2432 :END:
2433
2434 #+begin_src conf :tangle no
2435 ;=====================================================
2436 ;
2437 ;   To learn more about how to configure Polybar
2438 ;   go to https://github.com/jaagr/polybar
2439 ;
2440 ;   The README contains alot of information
2441 ;
2442 ;=====================================================
2443
2444 [colors]
2445 ;background = ${xrdb:color0:#222}
2446 background = #222
2447 background-alt = #444
2448 ;foreground = ${xrdb:color7:#222}
2449 foreground = #eee
2450 foreground-alt = #888
2451 primary = #ffb52a
2452 secondary = #e60053
2453 alert = #bd2c40
2454
2455 [bar/main]
2456 ;monitor = ${env:MONITOR:HDMI-1}
2457 width = 100%
2458 height = 27
2459 ;offset-x = 1%
2460 ;offset-y = 1%
2461 radius = 3.0
2462 fixed-center = true
2463
2464 background = ${colors.background}
2465 foreground = ${colors.foreground}
2466
2467 line-size = 3
2468 line-color = #f00
2469
2470 border-size = 4
2471 border-color = #00000000
2472
2473 padding-left = 0
2474 padding-right = 2
2475
2476 module-margin-left = 2
2477 module-margin-right = 2
2478
2479 font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
2480 font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
2481 font-2 = Wuncon Siji:pixelsize=10;1
2482 font-3 = FontAwesome:pixelsize=10;1
2483
2484 modules-left = bspwm xwindow
2485 modules-center =
2486 modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
2487
2488 tray-position = right
2489 tray-padding = 1
2490 ;tray-transparent = true
2491 ;tray-background = #0063ff
2492 tray-maxsize = 18
2493
2494 wm-restack = bspwm
2495
2496 ;override-redirect = true
2497
2498 scroll-up = bspwm-desknext
2499 scroll-down = bspwm-deskprev
2500
2501 [module/xwindow]
2502 type = internal/xwindow
2503 label = %title:0:50:...%
2504
2505 [module/xkeyboard]
2506 type = internal/xkeyboard
2507 blacklist-0 = num lock
2508
2509 format-prefix = " "
2510 format-prefix-foreground = ${colors.foreground-alt}
2511 format-prefix-underline = ${colors.secondary}
2512
2513 label-layout = %layout%
2514 label-layout-underline = ${colors.secondary}
2515
2516 label-indicator-padding = 2
2517 label-indicator-margin = 1
2518 label-indicator-background = ${colors.secondary}
2519 label-indicator-underline = ${colors.secondary}
2520
2521 [module/filesystem]
2522 type = internal/fs
2523 interval = 25
2524
2525 mount-0 = /
2526
2527 label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
2528 label-unmounted = %mountpoint% not mounted
2529 label-unmounted-foreground = ${colors.foreground-alt}
2530
2531 [module/bspwm]
2532 type = internal/bspwm
2533
2534 label-focused = %index%
2535 label-focused-background = ${colors.background-alt}
2536 label-focused-underline= ${colors.primary}
2537 label-focused-padding = 2
2538
2539 label-occupied = %index%
2540 label-occupied-padding = 2
2541
2542 label-urgent = %index%!
2543 label-urgent-background = ${colors.alert}
2544 label-urgent-padding = 2
2545
2546 label-empty = %index%
2547 label-empty-foreground = ${colors.foreground-alt}
2548 label-empty-padding = 2
2549
2550 [module/i3]
2551 type = internal/i3
2552 format = <label-state> <label-mode>
2553 index-sort = true
2554 wrapping-scroll = false
2555
2556 ; Only show workspaces on the same output as the bar
2557 ;pin-workspaces = true
2558
2559 label-mode-padding = 2
2560 label-mode-foreground = #000
2561 label-mode-background = ${colors.primary}
2562
2563 ; focused = Active workspace on focused monitor
2564 label-focused = %index%
2565 label-focused-background = ${module/bspwm.label-focused-background}
2566 label-focused-underline = ${module/bspwm.label-focused-underline}
2567 label-focused-padding = ${module/bspwm.label-focused-padding}
2568
2569 ; unfocused = Inactive workspace on any monitor
2570 label-unfocused = %index%
2571 label-unfocused-padding = ${module/bspwm.label-occupied-padding}
2572
2573 ; visible = Active workspace on unfocused monitor
2574 label-visible = %index%
2575 label-visible-background = ${self.label-focused-background}
2576 label-visible-underline = ${self.label-focused-underline}
2577 label-visible-padding = ${self.label-focused-padding}
2578
2579 ; urgent = Workspace with urgency hint set
2580 label-urgent = %index%
2581 label-urgent-background = ${module/bspwm.label-urgent-background}
2582 label-urgent-padding = ${module/bspwm.label-urgent-padding}
2583
2584 [module/mpd]
2585 type = internal/mpd
2586 format-online = <label-song>  <icon-prev> <icon-stop> <toggle> <icon-next>
2587
2588 icon-prev = 
2589 icon-stop = 
2590 icon-play = 
2591 icon-pause = 
2592 icon-next = 
2593
2594 label-song-maxlen = 25
2595 label-song-ellipsis = true
2596
2597 [module/xbacklight]
2598 type = internal/xbacklight
2599
2600 format = <label> <bar>
2601 label = BL
2602
2603 bar-width = 10
2604 bar-indicator = |
2605 bar-indicator-foreground = #ff
2606 bar-indicator-font = 2
2607 bar-fill = ─
2608 bar-fill-font = 2
2609 bar-fill-foreground = #9f78e1
2610 bar-empty = ─
2611 bar-empty-font = 2
2612 bar-empty-foreground = ${colors.foreground-alt}
2613
2614 [module/backlight-acpi]
2615 inherit = module/xbacklight
2616 type = internal/backlight
2617 ;card = intel_backlight
2618 card = mba6x_backlight
2619
2620 [module/cpu]
2621 type = internal/cpu
2622 interval = 2
2623 format-prefix = " "
2624 format-prefix-foreground = ${colors.foreground-alt}
2625 format-underline = #f90000
2626 label = %percentage%%
2627
2628 [module/memory]
2629 type = internal/memory
2630 interval = 2
2631 format-prefix = " "
2632 format-prefix-foreground = ${colors.foreground-alt}
2633 format-underline = #4bffdc
2634 label = %percentage_used%%
2635
2636 [module/wlan]
2637 type = internal/network
2638 interface =
2639 interval = 3.0
2640
2641 format-connected = <ramp-signal> <label-connected>
2642 format-connected-underline = #9f78e1
2643 label-connected = %essid%
2644
2645 format-disconnected =
2646 ;format-disconnected = <label-disconnected>
2647 ;format-disconnected-underline = ${self.format-connected-underline}
2648 ;label-disconnected = %ifname% disconnected
2649 ;label-disconnected-foreground = ${colors.foreground-alt}
2650
2651 ramp-signal-0 = 
2652 ramp-signal-1 = 
2653 ramp-signal-2 = 
2654 ramp-signal-3 = 
2655 ramp-signal-4 = 
2656 ramp-signal-foreground = ${colors.foreground-alt}
2657
2658 [module/eth]
2659 type = internal/network
2660 interface =
2661 interval = 3.0
2662
2663 format-connected-underline = #55aa55
2664 format-connected-prefix = " "
2665 format-connected-prefix-foreground = ${colors.foreground-alt}
2666 label-connected = %local_ip%
2667
2668 format-disconnected =
2669 ;format-disconnected = <label-disconnected>
2670 ;format-disconnected-underline = ${self.format-connected-underline}
2671 ;label-disconnected = %ifname% disconnected
2672 ;label-disconnected-foreground = ${colors.foreground-alt}
2673
2674 [module/date]
2675 type = internal/date
2676 interval = 5
2677
2678 date =
2679 date-alt = " %Y-%m-%d"
2680
2681 time = %H:%M
2682 time-alt = %H:%M:%S
2683
2684 format-prefix = 
2685 format-prefix-foreground = ${colors.foreground-alt}
2686 format-underline = #0a6cf5
2687
2688 label = %date% %time%
2689
2690 [module/volume]
2691 type = internal/volume
2692
2693 format-volume = <label-volume> <bar-volume>
2694 label-volume = vol
2695 label-volume-foreground = ${root.foreground}
2696
2697 format-muted-prefix = " "
2698 format-muted-foreground = ${colors.foreground-alt}
2699 label-muted = mute
2700
2701 bar-volume-width = 10
2702 bar-volume-foreground-0 = #55aa55
2703 bar-volume-foreground-1 = #55aa55
2704 bar-volume-foreground-2 = #55aa55
2705 bar-volume-foreground-3 = #55aa55
2706 bar-volume-foreground-4 = #55aa55
2707 bar-volume-foreground-5 = #f5a70a
2708 bar-volume-foreground-6 = #ff5555
2709 bar-volume-gradient = false
2710 bar-volume-indicator = |
2711 bar-volume-indicator-font = 2
2712 bar-volume-fill = ─
2713 bar-volume-fill-font = 2
2714 bar-volume-empty = ─
2715 bar-volume-empty-font = 2
2716 bar-volume-empty-foreground = ${colors.foreground-alt}
2717
2718 [module/battery]
2719 type = internal/battery
2720 battery = BAT0
2721 adapter = ADP1
2722 full-at = 64
2723
2724 format-charging = <animation-charging> <label-charging>
2725 format-charging-underline = #ffb52a
2726
2727 format-discharging = <ramp-capacity> <label-discharging>
2728 format-discharging-underline = ${self.format-charging-underline}
2729
2730 format-full-prefix = " "
2731 format-full-prefix-foreground = ${colors.foreground-alt}
2732 format-full-underline = ${self.format-charging-underline}
2733
2734 ramp-capacity-0 = 
2735 ramp-capacity-1 = 
2736 ramp-capacity-2 = 
2737 ramp-capacity-foreground = ${colors.foreground-alt}
2738
2739 animation-charging-0 = 
2740 animation-charging-1 = 
2741 animation-charging-2 = 
2742 animation-charging-foreground = ${colors.foreground-alt}
2743 animation-charging-framerate = 750
2744
2745 [module/temperature]
2746 type = internal/temperature
2747 thermal-zone = 1
2748 warn-temperature = 66
2749
2750 format = <ramp> <label>
2751 format-underline = #f50a4d
2752 format-warn = <ramp> <label-warn>
2753 format-warn-underline = ${self.format-underline}
2754
2755 label = %temperature%
2756 label-warn = %temperature%
2757 label-warn-foreground = ${colors.secondary}
2758
2759 ramp-0 = 
2760 ramp-1 = 
2761 ramp-2 = 
2762 ramp-foreground = ${colors.foreground-alt}
2763
2764 [module/powermenu]
2765 type = custom/menu
2766
2767 format-spacing = 1
2768
2769 label-open = 
2770 label-open-foreground = ${colors.secondary}
2771 label-close =  cancel
2772 label-close-foreground = ${colors.secondary}
2773 label-separator = |
2774 label-separator-foreground = ${colors.foreground-alt}
2775
2776 menu-0-0 = reboot
2777 menu-0-0-exec = menu-open-1
2778 menu-0-1 = power off
2779 menu-0-1-exec = menu-open-2
2780
2781 menu-1-0 = cancel
2782 menu-1-0-exec = menu-open-0
2783 menu-1-1 = reboot
2784 menu-1-1-exec = sudo reboot
2785
2786 menu-2-0 = power off
2787 menu-2-0-exec = sudo poweroff
2788 menu-2-1 = cancel
2789 menu-2-1-exec = menu-open-0
2790
2791 [module/mail]
2792 type = custom/script
2793 interval = 60
2794 format = <label>
2795 format-prefix = " "
2796 format-prefix-foreground = ${colors.foreground-alt}
2797 format-underline = #0a6cf5
2798 exec = notmuch count tag:unread
2799
2800 [settings]
2801 screenchange-reload = true
2802 ;compositing-background = xor
2803 ;compositing-background = screen
2804 ;compositing-foreground = source
2805 ;compositing-border = over
2806
2807 [global/wm]
2808 margin-top = 0
2809 margin-bottom = 0
2810
2811 ; vim:ft=dosini
2812 #+end_src
2813
2814 *** polybar-launch
2815 :PROPERTIES:
2816 :header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
2817 :END:
2818
2819 #+begin_src sh :tangle no
2820 # Terminate already running bar instances
2821 killall -q polybar
2822
2823 # Wait until the processes have been shut down
2824 while pgrep -x polybar >/dev/null; do sleep 1; done
2825
2826 # Launch main bar
2827 polybar main &
2828
2829 echo "Bars launched..."
2830 #+end_src
2831
2832 ** PowerTOP
2833 :PROPERTIES:
2834 :header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
2835 :END:
2836
2837 #+begin_src conf
2838 [Unit]
2839 Description=Powertop tunings
2840
2841 [Service]
2842 ExecStart=/usr/bin/powertop --auto-tune
2843 RemainAfterExit=true
2844
2845 [Install]
2846 WantedBy=multi-user.target
2847 #+end_src
2848
2849 ** ranger
2850
2851 *** rc.conf
2852 :PROPERTIES:
2853 :header-args+: :tangle ~/.config/ranger/rc.conf
2854 :END:
2855
2856 #+begin_src conf :tangle no
2857 # ===================================================================
2858 # This file contains the default startup commands for ranger.
2859 # To change them, it is recommended to create the file
2860 # ~/.config/ranger/rc.conf and add your custom commands there.
2861 #
2862 # If you copy this whole file there, you may want to set the environment
2863 # variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
2864 #
2865 # The purpose of this file is mainly to define keybindings and settings.
2866 # For running more complex python code, please create a plugin in "plugins/" or
2867 # a command in "commands.py".
2868 #
2869 # Each line is a command that will be run before the user interface
2870 # is initialized.  As a result, you can not use commands which rely
2871 # on the UI such as :delete or :mark.
2872 # ===================================================================
2873
2874 # ===================================================================
2875 # == Options
2876 # ===================================================================
2877
2878 # How many columns are there, and what are their relative widths?
2879 set column_ratios 1,3,4
2880
2881 # Which files should be hidden? (regular expression)
2882 set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
2883
2884 # Show hidden files? You can toggle this by typing 'zh'
2885 set show_hidden false
2886
2887 # Ask for a confirmation when running the "delete" command?
2888 # Valid values are "always" (default), "never", "multiple"
2889 # With "multiple", ranger will ask only if you delete multiple files at once.
2890 set confirm_on_delete multiple
2891
2892 # Which script is used to generate file previews?
2893 # ranger ships with scope.sh, a script that calls external programs (see
2894 # README for dependencies) to preview images, archives, etc.
2895 set preview_script ~/.config/ranger/scope.sh
2896
2897 # Use the external preview script or display simple plain text previews?
2898 set use_preview_script true
2899
2900 # Open all images in this directory when running certain image viewers
2901 # like feh or sxiv?  You can still open selected files by marking them.
2902 set open_all_images true
2903
2904 # Be aware of version control systems and display information.
2905 set vcs_aware false
2906
2907 # State of the three backends git, hg, bzr. The possible states are
2908 # disabled, local (only show local info), enabled (show local and remote
2909 # information).
2910 set vcs_backend_git enabled
2911 set vcs_backend_hg disabled
2912 set vcs_backend_bzr disabled
2913
2914 # Preview images in full color with the external command "w3mimgpreview"?
2915 # This requires the console web browser "w3m" and a supported terminal.
2916 # It has been successfully tested with "xterm" and "urxvt" without tmux.
2917 set preview_images true
2918
2919 # Use a unicode "..." character to mark cut-off filenames?
2920 set unicode_ellipsis false
2921
2922 # Show dotfiles in the bookmark preview box?
2923 set show_hidden_bookmarks true
2924
2925 # Which colorscheme to use?  These colorschemes are available by default:
2926 # default, jungle, snow
2927 set colorscheme default
2928
2929 # Preview files on the rightmost column?
2930 # And collapse (shrink) the last column if there is nothing to preview?
2931 set preview_files true
2932 set preview_directories true
2933 set collapse_preview true
2934
2935 # Save the console history on exit?
2936 set save_console_history true
2937
2938 # Draw the status bar on top of the browser window (default: bottom)
2939 set status_bar_on_top false
2940
2941 # Draw a progress bar in the status bar which displays the average state of all
2942 # currently running tasks which support progress bars?
2943 set draw_progress_bar_in_status_bar true
2944
2945 # Draw borders around columns?
2946 set draw_borders true
2947
2948 # Display the directory name in tabs?
2949 set dirname_in_tabs false
2950
2951 # Enable the mouse support?
2952 set mouse_enabled true
2953
2954 # Display the file size in the main column or status bar?
2955 set display_size_in_main_column true
2956 set display_size_in_status_bar true
2957
2958 # Display files tags in all columns or only in main column?
2959 set display_tags_in_all_columns true
2960
2961 # Set a title for the window?
2962 set update_title false
2963
2964 # Set the title to "ranger" in the tmux program?
2965 set update_tmux_title false
2966
2967 # Shorten the title if it gets long?  The number defines how many
2968 # directories are displayed at once, 0 turns off this feature.
2969 set shorten_title 3
2970
2971 # Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
2972 set tilde_in_titlebar false
2973
2974 # How many directory-changes or console-commands should be kept in history?
2975 set max_history_size 20
2976 set max_console_history_size 50
2977
2978 # Try to keep so much space between the top/bottom border when scrolling:
2979 set scroll_offset 8
2980
2981 # Flush the input after each key hit?  (Noticable when ranger lags)
2982 set flushinput true
2983
2984 # Padding on the right when there's no preview?
2985 # This allows you to click into the space to run the file.
2986 set padding_right true
2987
2988 # Save bookmarks (used with mX and `X) instantly?
2989 # This helps to synchronize bookmarks between multiple ranger
2990 # instances but leads to *slight* performance loss.
2991 # When false, bookmarks are saved when ranger is exited.
2992 set autosave_bookmarks true
2993
2994 # You can display the "real" cumulative size of directories by using the
2995 # command :get_cumulative_size or typing "dc".  The size is expensive to
2996 # calculate and will not be updated automatically.  You can choose
2997 # to update it automatically though by turning on this option:
2998 set autoupdate_cumulative_size false
2999
3000 # Turning this on makes sense for screen readers:
3001 set show_cursor false
3002
3003 # One of: size, basename, mtime, type
3004 set sort natural
3005
3006 # Additional sorting options
3007 set sort_reverse false
3008 set sort_case_insensitive true
3009 set sort_directories_first true
3010
3011 # Enable this if key combinations with the Alt Key don't work for you.
3012 # (Especially on xterm)
3013 set xterm_alt_key false
3014
3015 # ===================================================================
3016 # == Local Options
3017 # ===================================================================
3018 # You can set local options that only affect a single directory.
3019
3020 # Examples:
3021 # setlocal path=~/downloads sort mtime
3022
3023 # ===================================================================
3024 # == Command Aliases in the Console
3025 # ===================================================================
3026
3027 alias e    edit
3028 alias q    quit
3029 alias q!   quitall
3030 alias qall quitall
3031 alias setl setlocal
3032
3033 alias filter     scout -prt
3034 alias find       scout -aet
3035 alias mark       scout -mr
3036 alias unmark     scout -Mr
3037 alias search     scout -rs
3038 alias search_inc scout -rts
3039 alias travel     scout -aefiklst
3040
3041 # ===================================================================
3042 # == Define keys for the browser
3043 # ===================================================================
3044
3045 # Basic
3046 map     Q quit!
3047 map     q quit
3048 copymap q ZZ ZQ
3049
3050 map R     reload_cwd
3051 map <C-r> reset
3052 map <C-l> redraw_window
3053 map <C-c> abort
3054 map <esc> change_mode normal
3055
3056 map i display_file
3057 map ? help
3058 map W display_log
3059 map w taskview_open
3060 map S shell $SHELL
3061
3062 map :  console
3063 map ;  console
3064 map !  console shell
3065 map @  console -p6 shell  %%s
3066 map #  console shell -p
3067 map s  console shell
3068 map r  chain draw_possible_programs; console open_with
3069 map f  console find
3070 map cd console cd
3071
3072 # Tagging / Marking
3073 map t       tag_toggle
3074 map ut      tag_remove
3075 map "<any>  tag_toggle tag=%any
3076 map <Space> mark_files toggle=True
3077 map v       mark_files all=True toggle=True
3078 map uv      mark_files all=True val=False
3079 map V       toggle_visual_mode
3080 map uV      toggle_visual_mode reverse=True
3081
3082 # For the nostalgics: Midnight Commander bindings
3083 map <F1> help
3084 map <F3> display_file
3085 map <F4> edit
3086 map <F5> copy
3087 map <F6> cut
3088 map <F7> console mkdir
3089 map <F8> console delete
3090 map <F10> exit
3091
3092 # In case you work on a keyboard with dvorak layout
3093 map <UP>       move up=1
3094 map <DOWN>     move down=1
3095 map <LEFT>     move left=1
3096 map <RIGHT>    move right=1
3097 map <HOME>     move to=0
3098 map <END>      move to=-1
3099 map <PAGEDOWN> move down=1   pages=True
3100 map <PAGEUP>   move up=1     pages=True
3101 map <CR>       move right=1
3102 map <DELETE>   console delete
3103 map <INSERT>   console touch
3104
3105 # VIM-like
3106 copymap <UP>       k
3107 copymap <DOWN>     j
3108 copymap <LEFT>     h
3109 copymap <RIGHT>    l
3110 copymap <HOME>     gg
3111 copymap <END>      G
3112 copymap <PAGEDOWN> <C-F>
3113 copymap <PAGEUP>   <C-B>
3114
3115 map J  move down=0.5  pages=True
3116 map K  move up=0.5    pages=True
3117 copymap J <C-D>
3118 copymap K <C-U>
3119
3120 # Jumping around
3121 map H     history_go -1
3122 map L     history_go 1
3123 map ]     move_parent 1
3124 map [     move_parent -1
3125 map }     traverse
3126
3127 map gh cd ~
3128 map ge cd /etc
3129 map gu cd /usr
3130 map gd cd /dev
3131 map gl cd -r .
3132 map gL cd -r %f
3133 map go cd /opt
3134 map gv cd /var
3135 map gm cd /media
3136 map gM cd /mnt
3137 map gs cd /srv
3138 map gr cd /
3139 map gR eval fm.cd(ranger.RANGERDIR)
3140 map g/ cd /
3141 map g? cd /usr/share/doc/ranger
3142
3143 # External Programs
3144 map E  edit
3145 map du shell -p du --max-depth=1 -h --apparent-size
3146 map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
3147 map yp shell -d echo -n %d/%f | xsel -i
3148 map yd shell -d echo -n %d    | xsel -i
3149 map yn shell -d echo -n %f    | xsel -i
3150
3151 # Filesystem Operations
3152 map =  chmod
3153
3154 map cw console rename
3155 map A  eval fm.open_console('rename ' + fm.thisfile.basename)
3156 map I  eval fm.open_console('rename ' + fm.thisfile.basename, position=7)
3157
3158 map pp paste
3159 map po paste overwrite=True
3160 map pl paste_symlink relative=False
3161 map pL paste_symlink relative=True
3162 map phl paste_hardlink
3163 map pht paste_hardlinked_subtree
3164
3165 map dd cut
3166 map ud uncut
3167 map da cut mode=add
3168 map dr cut mode=remove
3169
3170 map yy copy
3171 map uy uncut
3172 map ya copy mode=add
3173 map yr copy mode=remove
3174
3175 # Temporary workarounds
3176 map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
3177 map dG  eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
3178 map dj  eval fm.cut(dirarg=dict(down=1), narg=quantifier)
3179 map dk  eval fm.cut(dirarg=dict(up=1), narg=quantifier)
3180 map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
3181 map yG  eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
3182 map yj  eval fm.copy(dirarg=dict(down=1), narg=quantifier)
3183 map yk  eval fm.copy(dirarg=dict(up=1), narg=quantifier)
3184
3185 # Searching
3186 map /  console search
3187 map n  search_next
3188 map N  search_next forward=False
3189 map ct search_next order=tag
3190 map cs search_next order=size
3191 map ci search_next order=mimetype
3192 map cc search_next order=ctime
3193 map cm search_next order=mtime
3194 map ca search_next order=atime
3195
3196 # Tabs
3197 map <C-n>     tab_new ~
3198 map <C-w>     tab_close
3199 map <TAB>     tab_move 1
3200 map <S-TAB>   tab_move -1
3201 map <A-Right> tab_move 1
3202 map <A-Left>  tab_move -1
3203 map gt        tab_move 1
3204 map gT        tab_move -1
3205 map gn        tab_new ~
3206 map gc        tab_close
3207 map uq        tab_restore
3208 map <a-1>     tab_open 1
3209 map <a-2>     tab_open 2
3210 map <a-3>     tab_open 3
3211 map <a-4>     tab_open 4
3212 map <a-5>     tab_open 5
3213 map <a-6>     tab_open 6
3214 map <a-7>     tab_open 7
3215 map <a-8>     tab_open 8
3216 map <a-9>     tab_open 9
3217
3218 # Sorting
3219 map or toggle_option sort_reverse
3220 map os chain set sort=size;      set sort_reverse=False
3221 map ob chain set sort=basename;  set sort_reverse=False
3222 map on chain set sort=natural;   set sort_reverse=False
3223 map om chain set sort=mtime;     set sort_reverse=False
3224 map oc chain set sort=ctime;     set sort_reverse=False
3225 map oa chain set sort=atime;     set sort_reverse=False
3226 map ot chain set sort=type;      set sort_reverse=False
3227
3228 map oS chain set sort=size;      set sort_reverse=True
3229 map oB chain set sort=basename;  set sort_reverse=True
3230 map oN chain set sort=natural;   set sort_reverse=True
3231 map oM chain set sort=mtime;     set sort_reverse=True
3232 map oC chain set sort=ctime;     set sort_reverse=True
3233 map oA chain set sort=atime;     set sort_reverse=True
3234 map oT chain set sort=type;      set sort_reverse=True
3235
3236 map dc get_cumulative_size
3237
3238 # Settings
3239 map zc    toggle_option collapse_preview
3240 map zd    toggle_option sort_directories_first
3241 map zh    toggle_option show_hidden
3242 map <C-h> toggle_option show_hidden
3243 map zi    toggle_option flushinput
3244 map zm    toggle_option mouse_enabled
3245 map zp    toggle_option preview_files
3246 map zP    toggle_option preview_directories
3247 map zs    toggle_option sort_case_insensitive
3248 map zu    toggle_option autoupdate_cumulative_size
3249 map zv    toggle_option use_preview_script
3250 map zf    console filter
3251
3252 # Bookmarks
3253 map `<any>  enter_bookmark %any
3254 map '<any>  enter_bookmark %any
3255 map m<any>  set_bookmark %any
3256 map um<any> unset_bookmark %any
3257
3258 map m<bg>   draw_bookmarks
3259 copymap m<bg>  um<bg> `<bg> '<bg>
3260
3261 # Generate all the chmod bindings with some python help:
3262 eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
3263 eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
3264 eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
3265 eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
3266 eval for arg in "rwxXst": cmd("map +{0}  shell -d chmod u+{0} %s".format(arg))
3267
3268 eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
3269 eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
3270 eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
3271 eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
3272 eval for arg in "rwxXst": cmd("map -{0}  shell -d chmod u-{0} %s".format(arg))
3273
3274 # ===================================================================
3275 # == Define keys for the console
3276 # ===================================================================
3277 # Note: Unmapped keys are passed directly to the console.
3278
3279 # Basic
3280 cmap <tab>   eval fm.ui.console.tab()
3281 cmap <s-tab> eval fm.ui.console.tab(-1)
3282 cmap <ESC>   eval fm.ui.console.close()
3283 cmap <CR>    eval fm.ui.console.execute()
3284 cmap <C-l>   redraw_window
3285
3286 copycmap <ESC> <C-c>
3287 copycmap <CR>  <C-j>
3288
3289 # Move around
3290 cmap <up>    eval fm.ui.console.history_move(-1)
3291 cmap <down>  eval fm.ui.console.history_move(1)
3292 cmap <left>  eval fm.ui.console.move(left=1)
3293 cmap <right> eval fm.ui.console.move(right=1)
3294 cmap <home>  eval fm.ui.console.move(right=0, absolute=True)
3295 cmap <end>   eval fm.ui.console.move(right=-1, absolute=True)
3296
3297 # Line Editing
3298 cmap <backspace>  eval fm.ui.console.delete(-1)
3299 cmap <delete>     eval fm.ui.console.delete(0)
3300 cmap <C-w>        eval fm.ui.console.delete_word()
3301 cmap <C-k>        eval fm.ui.console.delete_rest(1)
3302 cmap <C-u>        eval fm.ui.console.delete_rest(-1)
3303 cmap <C-y>        eval fm.ui.console.paste()
3304
3305 # And of course the emacs way
3306 copycmap <up>        <C-p>
3307 copycmap <down>      <C-n>
3308 copycmap <left>      <C-b>
3309 copycmap <right>     <C-f>
3310 copycmap <home>      <C-a>
3311 copycmap <end>       <C-e>
3312 copycmap <delete>    <C-d>
3313 copycmap <backspace> <C-h>
3314
3315 # Note: There are multiple ways to express backspaces.  <backspace> (code 263)
3316 # and <backspace2> (code 127).  To be sure, use both.
3317 copycmap <backspace> <backspace2>
3318
3319 # This special expression allows typing in numerals:
3320 cmap <allow_quantifiers> false
3321
3322 # ===================================================================
3323 # == Pager Keybindings
3324 # ===================================================================
3325
3326 # Movement
3327 pmap  <down>      pager_move  down=1
3328 pmap  <up>        pager_move  up=1
3329 pmap  <left>      pager_move  left=4
3330 pmap  <right>     pager_move  right=4
3331 pmap  <home>      pager_move  to=0
3332 pmap  <end>       pager_move  to=-1
3333 pmap  <pagedown>  pager_move  down=1.0  pages=True
3334 pmap  <pageup>    pager_move  up=1.0    pages=True
3335 pmap  <C-d>       pager_move  down=0.5  pages=True
3336 pmap  <C-u>       pager_move  up=0.5    pages=True
3337
3338 copypmap <UP>       k  <C-p>
3339 copypmap <DOWN>     j  <C-n> <CR>
3340 copypmap <LEFT>     h
3341 copypmap <RIGHT>    l
3342 copypmap <HOME>     g
3343 copypmap <END>      G
3344 copypmap <C-d>      d
3345 copypmap <C-u>      u
3346 copypmap <PAGEDOWN> n  f  <C-F>  <Space>
3347 copypmap <PAGEUP>   p  b  <C-B>
3348
3349 # Basic
3350 pmap     <ESC> pager_close
3351 copypmap <ESC> q Q i <F3>
3352 pmap E      edit_file
3353
3354 # ===================================================================
3355 # == Taskview Keybindings
3356 # ===================================================================
3357
3358 # Movement
3359 tmap <up>        taskview_move up=1
3360 tmap <down>      taskview_move down=1
3361 tmap <home>      taskview_move to=0
3362 tmap <end>       taskview_move to=-1
3363 tmap <pagedown>  taskview_move down=1.0  pages=True
3364 tmap <pageup>    taskview_move up=1.0    pages=True
3365 tmap <C-d>       taskview_move down=0.5  pages=True
3366 tmap <C-u>       taskview_move up=0.5    pages=True
3367
3368 copytmap <UP>       k  <C-p>
3369 copytmap <DOWN>     j  <C-n> <CR>
3370 copytmap <HOME>     g
3371 copytmap <END>      G
3372 copytmap <C-u>      u
3373 copytmap <PAGEDOWN> n  f  <C-F>  <Space>
3374 copytmap <PAGEUP>   p  b  <C-B>
3375
3376 # Changing priority and deleting tasks
3377 tmap J          eval -q fm.ui.taskview.task_move(-1)
3378 tmap K          eval -q fm.ui.taskview.task_move(0)
3379 tmap dd         eval -q fm.ui.taskview.task_remove()
3380 tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
3381 tmap <pageup>   eval -q fm.ui.taskview.task_move(0)
3382 tmap <delete>   eval -q fm.ui.taskview.task_remove()
3383
3384 # Basic
3385 tmap <ESC> taskview_close
3386 copytmap <ESC> q Q w <C-c>
3387 #+end_src
3388
3389 *** scope.sh
3390 :PROPERTIES:
3391 :header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
3392 :END:
3393
3394 #+begin_src sh :tangle no
3395 # ranger supports enhanced previews.  If the option "use_preview_script"
3396 # is set to True and this file exists, this script will be called and its
3397 # output is displayed in ranger.  ANSI color codes are supported.
3398
3399 # NOTES: This script is considered a configuration file.  If you upgrade
3400 # ranger, it will be left untouched. (You must update it yourself.)
3401 # Also, ranger disables STDIN here, so interactive scripts won't work properly
3402
3403 # Meanings of exit codes:
3404 # code | meaning    | action of ranger
3405 # -----+------------+-------------------------------------------
3406 # 0    | success    | success. display stdout as preview
3407 # 1    | no preview | failure. display no preview at all
3408 # 2    | plain text | display the plain content of the file
3409 # 3    | fix width  | success. Don't reload when width changes
3410 # 4    | fix height | success. Don't reload when height changes
3411 # 5    | fix both   | success. Don't ever reload
3412
3413 # Meaningful aliases for arguments:
3414 path="$1"    # Full path of the selected file
3415 width="$2"   # Width of the preview pane (number of fitting characters)
3416 height="$3"  # Height of the preview pane (number of fitting characters)
3417
3418 maxln=200    # Stop after $maxln lines.  Can be used like ls | head -n $maxln
3419
3420 # Find out something about the file:
3421 mimetype=$(file --mime-type -Lb "$path")
3422 extension=${path##*.}
3423
3424 # Functions:
3425 # runs a command and saves its output into $output.  Useful if you need
3426 # the return value AND want to use the output in a pipe
3427 try() { output=$(eval '"$@"'); }
3428
3429 # writes the output of the previouosly used "try" command
3430 dump() { echo "$output"; }
3431
3432 # a common post-processing function used after most commands
3433 trim() { head -n "$maxln"; }
3434
3435 # wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
3436 highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }
3437
3438 case "$extension" in
3439     # Archive extensions:
3440     7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
3441     rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
3442         try als "$path" && { dump | trim; exit 0; }
3443         try acat "$path" && { dump | trim; exit 3; }
3444         try bsdtar -lf "$path" && { dump | trim; exit 0; }
3445         exit 1;;
3446     rar)
3447         try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
3448     # PDF documents:
3449     pdf)
3450         try pdftotext -l 10 -nopgbrk -q "$path" - && \
3451             { dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
3452     # BitTorrent Files
3453     torrent)
3454         try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
3455     # HTML Pages:
3456     htm|html|xhtml)
3457         try w3m    -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3458         try lynx   -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3459         try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3460         ;; # fall back to highlight/cat if the text browsers fail
3461 esac
3462
3463 case "$mimetype" in
3464     # Syntax highlight for text files:
3465     text/* | */xml)
3466         try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
3467     # Ascii-previews of images:
3468     image/*)
3469         img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
3470     # Display information about media files:
3471     video/* | audio/*)
3472         exiftool "$path" && exit 5
3473         # Use sed to remove spaces so the output fits into the narrow window
3474         try mediainfo "$path" && { dump | trim | sed 's/  \+:/: /;';  exit 5; } || exit 1;;
3475 esac
3476
3477 exit 1
3478 #+end_src
3479
3480 ** redshift
3481 :PROPERTIES:
3482 :header-args+: :tangle ~/.config/redshift.conf :comments none
3483 :END:
3484
3485 #+begin_src conf
3486 ; Global settings for redshift
3487 [redshift]
3488 ; Set the day and night screen temperatures (Neutral is 6500K)
3489 ;temp-day=5700
3490 ;temp-night=3500
3491
3492 ;temp-day=6500
3493 temp-day=6200
3494 ;temp-night=4800
3495 ;temp-night=5000
3496 ;temp-night=4500
3497 temp-night=4000
3498
3499 ; Enable/Disable a smooth transition between day and night
3500 ; 0 will cause a direct change from day to night screen temperature.
3501 ; 1 will gradually increase or decrease the screen temperature.
3502 transition=1
3503
3504 ; Set the screen brightness. Default is 1.0.
3505 ;brightness=0.9
3506 ; It is also possible to use different settings for day and night
3507 ; since version 1.8.
3508 ;brightness-day=0.7
3509 ;brightness-night=0.4
3510 ; Set the screen gamma (for all colors, or each color channel
3511 ; individually)
3512 ;gamma=0.8
3513 ;gamma=1.0
3514 ;gamma=0.8:0.7:0.8
3515 ; This can also be set individually for day and night since
3516 ; version 1.10.
3517 ;gamma-day=0.8:0.7:0.8
3518 ;gamma-night=0.6
3519
3520 ; Set the location-provider: 'geoclue2' or 'manual'
3521 ; type 'redshift -l list' to see possible values.
3522 ; The location provider settings are in a different section.
3523 ;location-provider=manual
3524 location-provider=geoclue2
3525
3526 ; Set the adjustment-method: 'randr', 'vidmode'
3527 ; type 'redshift -m list' to see all possible values.
3528 ; 'randr' is the preferred method, 'vidmode' is an older API.
3529 ; but works in some cases when 'randr' does not.
3530 ; The adjustment method settings are in a different section.
3531 adjustment-method=randr
3532
3533 ; Configuration of the location-provider:
3534 ; type 'redshift -l PROVIDER:help' to see the settings.
3535 ; ex: 'redshift -l manual:help'
3536 ; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
3537 ; are negative numbers.
3538 ;[manual]
3539 ;lat=48.1
3540 ;lon=11.6
3541
3542 ; Configuration of the adjustment-method
3543 ; type 'redshift -m METHOD:help' to see the settings.
3544 ; ex: 'redshift -m randr:help'
3545 ; In this example, randr is configured to adjust screen 1.
3546 ; Note that the numbering starts from 0, so this is actually the
3547 ; second screen. If this option is not specified, Redshift will try
3548 ; to adjust _all_ screens.
3549 ;[randr]
3550 ;screen=1
3551 #+end_src
3552
3553 ** rofi
3554 :PROPERTIES:
3555 :header-args+: :tangle ~/.config/rofi/config
3556 :END:
3557
3558 #+begin_src conf
3559 rofi.font: Ubuntu Mono 13
3560 ! rofi.font: Inconsolata 16
3561 ! rofi.font: Iosevka 13
3562 ! rofi.font: Source Code Pro 11
3563 rofi.modi: run,window
3564 ! rofi.width: 640
3565 rofi.width: 600
3566 !rofi.location: 2
3567 !rofi.yoffset: 200
3568 rofi.monitor: -1
3569 !rofi.lines: 10
3570
3571 !rofi.theme: /usr/share/rofi/themes//Arc.rasi
3572 !rofi.theme: /usr/share/rofi/themes//Paper.rasi
3573 !rofi.theme: /usr/share/rofi/themes//sidebar.rasi
3574
3575 rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
3576 #+end_src
3577
3578 ** rofi-pass
3579 :PROPERTIES:
3580 :header-args+: :tangle ~/.config/rofi-pass/config
3581 :END:
3582
3583 #+begin_src conf
3584 # permanently set alternative root dir
3585 # root=/path/to/root
3586
3587 # rofi command. Make sure to have "$@" as last argument
3588 _rofi () {
3589     #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
3590     rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
3591 }
3592
3593 # xdotool needs the keyboard layout to be set using setxkbmap
3594 # You can do this in your autostart scripts (e.g. xinitrc)
3595
3596 # If for some reason, you cannot do this, you can set the command here.
3597 # and set fix_layout to true
3598 fix_layout=false
3599
3600 layout_cmd () {
3601   setxkbmap us
3602 }
3603
3604 # fields to be used
3605 URL_field='url'
3606 USERNAME_field='user'
3607 AUTOTYPE_field='autotype'
3608
3609 # delay to be used for :delay keyword
3610 delay=2
3611
3612 ## Programs to be used
3613 # Editor
3614 EDITOR='gvim -f'
3615
3616 # Browser
3617 BROWSER='chromium'
3618
3619 ## Misc settings
3620
3621 default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
3622 auto_enter='false'
3623 notify='false'
3624 default_autotype='user :tab pass'
3625
3626 # color of the help messages
3627 # leave empty for autodetection
3628 help_color="#4872FF"
3629
3630 # Clipboard settings
3631 # Possible options: primary, clipboard, both
3632 clip=primary
3633
3634 # Options for generating new password entries
3635 # default_user is also used for password files that have no user field.
3636 default_user=aminb
3637 default_user2=aminban
3638 password_length=30
3639
3640 # Custom Keybindings
3641 #autotype="Alt+1"
3642 autotype="Alt+m"
3643 type_user="Alt+2"
3644 type_pass="Alt+3"
3645 open_url="Alt+4"
3646 copy_name="Alt+u"
3647 copy_url="Alt+l"
3648 copy_pass="Alt+p"
3649 show="Alt+o"
3650 copy_entry="Alt+2"
3651 type_entry="Alt+1"
3652 copy_menu="Alt+c"
3653 action_menu="Alt+a"
3654 type_menu="Alt+t"
3655 help="Alt+h"
3656 switch="Alt+x"
3657 insert_pass="Alt+n"
3658 #+end_src
3659
3660 ** sway
3661 :PROPERTIES:
3662 :header-args+: :tangle ~/.config/sway/config
3663 :END:
3664
3665 #+begin_src conf
3666 exec xrdb .Xresources
3667 exec dunst
3668 ### Variables
3669 # super
3670 set $mod Mod4
3671 # alt
3672 set $mod2 Mod1
3673 set $left h
3674 set $down j
3675 set $up k
3676 set $right l
3677 set $term urxvt
3678 set $menu rofi -show run -display-run '> ' -display-window ' 🗔 '
3679
3680 ### Output configuration
3681 #
3682 # Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/)
3683 output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
3684 #
3685 # Example configuration:
3686 #
3687 #   output HDMI-A-1 resolution 1920x1080 position 1920,0
3688 #
3689 # You can get the names of your outputs by running: swaymsg -t get_outputs
3690
3691 ### Idle configuration
3692 #
3693 # Example configuration:
3694 #
3695 #exec swayidle \
3696 #    timeout 300 'swaylock -c 000000' \
3697 #    timeout 600 'swaymsg "output * dpms off"' \
3698 #       resume 'swaymsg "output * dpms on"' \
3699 #    before-sleep 'swaylock -c 000000'
3700 #
3701 # This will lock your screen after 300 seconds of inactivity, then turn off
3702 # your displays after another 600 seconds, and turn your screens back on when
3703 # resumed. It will also lock your screen before your computer goes to sleep.
3704
3705 ### Input configuration
3706
3707 input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
3708     dwt enabled
3709     tap enabled
3710     natural_scroll enabled
3711     middle_emulation enabled
3712     click_method clickfinger
3713 }
3714
3715 input "1:1:AT_Translated_Set_2_keyboard" {
3716     repeat_delay 200
3717     repeat_rate 45
3718     xkb_layout us,ir
3719     xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
3720 }
3721
3722
3723 ### Key bindings
3724 #
3725 # Basics:
3726 #
3727     # start a terminal
3728     bindsym $mod+Return exec $term
3729
3730     # kill focused window
3731     bindsym $mod+Shift+q kill
3732
3733     # start your launcher
3734     bindsym $mod+d exec $menu
3735
3736     # Drag floating windows by holding down $mod and left mouse button.
3737     # Resize them with right mouse button + $mod.
3738     floating_modifier $mod
3739
3740     # reload the configuration file
3741     bindsym $mod+Shift+c reload
3742
3743     # exit sway (logs you out of your wayland session)
3744     bindsym $mod+Shift+e exit
3745
3746     bindsym $mod+apostrophe exec rofi-light        # rofi-based brightness chooser
3747     bindsym XF86MonBrightnessUp exec light -A 5    # increase screen brightness
3748     bindsym XF86MonBrightnessDown exec light -U 5  # decrease screen brightness
3749
3750     bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
3751     bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
3752     bindsym XF86AudioMute exec pamixer --toggle-mute
3753     bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
3754
3755     # original sway workspace switch and window move
3756     bindsym $mod+bracketleft workspace prev
3757     bindsym $mod+bracketright workspace next
3758     bindsym $mod+braceleft move container to workspace prev
3759     bindsym $mod+braceright move container to workspace next
3760
3761     # bspwm-esque workspace switch and window move
3762     bindsym $mod2+bracketleft exec sway-ws-util switch prev
3763     bindsym $mod2+bracketright exec sway-ws-util switch next
3764     bindsym $mod2+braceleft exec sway-ws-util move prev follow
3765     bindsym $mod2+braceright exec sway-ws-util move next follow
3766 #
3767 # Moving around:
3768 #
3769     # Move your focus around
3770     bindsym $mod+$left focus left
3771     bindsym $mod+$down focus down
3772     bindsym $mod+$up focus up
3773     bindsym $mod+$right focus right
3774     # or use $mod+[up|down|left|right]
3775     bindsym $mod+Left focus left
3776     bindsym $mod+Down focus down
3777     bindsym $mod+Up focus up
3778     bindsym $mod+Right focus right
3779
3780     # _move_ the focused window with the same, but add Shift
3781     bindsym $mod+Shift+$left move left
3782     bindsym $mod+Shift+$down move down
3783     bindsym $mod+Shift+$up move up
3784     bindsym $mod+Shift+$right move right
3785     # ditto, with arrow keys
3786     bindsym $mod+Shift+Left move left
3787     bindsym $mod+Shift+Down move down
3788     bindsym $mod+Shift+Up move up
3789     bindsym $mod+Shift+Right move right
3790 #
3791 # Workspaces:
3792 #
3793     # switch to workspace
3794     bindsym $mod+1 workspace 1
3795     bindsym $mod+2 workspace 2
3796     bindsym $mod+3 workspace 3
3797     bindsym $mod+4 workspace 4
3798     bindsym $mod+5 workspace 5
3799     bindsym $mod+6 workspace 6
3800     bindsym $mod+7 workspace 7
3801     bindsym $mod+8 workspace 8
3802     bindsym $mod+9 workspace 9
3803     bindsym $mod+0 workspace 10
3804     # move focused container to workspace
3805     bindsym $mod+Shift+1 move container to workspace 1
3806     bindsym $mod+Shift+2 move container to workspace 2
3807     bindsym $mod+Shift+3 move container to workspace 3
3808     bindsym $mod+Shift+4 move container to workspace 4
3809     bindsym $mod+Shift+5 move container to workspace 5
3810     bindsym $mod+Shift+6 move container to workspace 6
3811     bindsym $mod+Shift+7 move container to workspace 7
3812     bindsym $mod+Shift+8 move container to workspace 8
3813     bindsym $mod+Shift+9 move container to workspace 9
3814     bindsym $mod+Shift+0 move container to workspace 10
3815     # Note: workspaces can have any name you want, not just numbers.
3816     # We just use 1-10 as the default.
3817 #
3818 # Layout stuff:
3819 #
3820     # You can "split" the current object of your focus with
3821     # $mod+b or $mod+v, for horizontal and vertical splits
3822     # respectively.
3823     bindsym $mod+b splith
3824     bindsym $mod+v splitv
3825
3826     # Switch the current container between different layout styles
3827     bindsym $mod+s layout stacking
3828     bindsym $mod+w layout tabbed
3829     bindsym $mod+e layout toggle split
3830
3831     # Make the current focus fullscreen
3832     bindsym $mod+f fullscreen
3833
3834     # Toggle the current focus between tiling and floating mode
3835     bindsym $mod+Shift+space floating toggle
3836
3837     # Swap focus between the tiling area and the floating area
3838     bindsym $mod+space focus mode_toggle
3839
3840     # move focus to the parent container
3841     bindsym $mod+a focus parent
3842 #
3843 # Scratchpad:
3844 #
3845     # Sway has a "scratchpad", which is a bag of holding for windows.
3846     # You can send windows there and get them back later.
3847
3848     # Move the currently focused window to the scratchpad
3849     bindsym $mod+Shift+minus move scratchpad
3850
3851     # Show the next scratchpad window or hide the focused scratchpad window.
3852     # If there are multiple scratchpad windows, this command cycles through them.
3853     bindsym $mod+minus scratchpad show
3854 #
3855 # Resizing containers:
3856 #
3857 mode "resize" {
3858     # left will shrink the containers width
3859     # right will grow the containers width
3860     # up will shrink the containers height
3861     # down will grow the containers height
3862     bindsym $left resize shrink width 10px
3863     bindsym $down resize grow height 10px
3864     bindsym $up resize shrink height 10px
3865     bindsym $right resize grow width 10px
3866
3867     # ditto, with arrow keys
3868     bindsym Left resize shrink width 10px
3869     bindsym Down resize grow height 10px
3870     bindsym Up resize shrink height 10px
3871     bindsym Right resize grow width 10px
3872
3873     # return to default mode
3874     bindsym Return mode "default"
3875     bindsym Escape mode "default"
3876 }
3877 bindsym $mod+Shift+r mode "resize"
3878
3879 #
3880 # Status Bar:
3881 #
3882 # Read `man 5 sway-bar` for more information about this section.
3883 bar {
3884     position bottom
3885     colors {
3886         statusline #ffffff
3887         background #323232
3888         inactive_workspace #32323200 #32323200 #5c5c5c
3889     }
3890     status_command i3gs ~/.config/i3gs/config
3891 }
3892
3893 include /etc/sway/config.d/*
3894 #+end_src
3895
3896 ** TLP
3897
3898 *** TODO enigma
3899 *** plasma
3900
3901 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/default/tlp")
3902 # ------------------------------------------------------------------------------
3903 # tlp - Parameters for power saving
3904 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
3905
3906 # Hint: some features are disabled by default, remove the leading # to enable
3907 # them.
3908
3909 # Set to 0 to disable, 1 to enable TLP.
3910 TLP_ENABLE=1
3911
3912 # Operation mode when no power supply can be detected: AC, BAT.
3913 # Concerns some desktop and embedded hardware only.
3914 TLP_DEFAULT_MODE=AC
3915
3916 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
3917 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
3918 TLP_PERSISTENT_DEFAULT=0
3919
3920 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
3921 # Non-zero value enables, zero disables laptop mode.
3922 DISK_IDLE_SECS_ON_AC=0
3923 DISK_IDLE_SECS_ON_BAT=2
3924
3925 # Dirty page values (timeouts in secs).
3926 MAX_LOST_WORK_SECS_ON_AC=15
3927 MAX_LOST_WORK_SECS_ON_BAT=60
3928
3929 # Hint: CPU parameters below are disabled by default, remove the leading #
3930 # to enable them, otherwise kernel default values are used.
3931
3932 # Select a CPU frequency scaling governor.
3933 # Intel Core i processor with intel_pstate driver:
3934 #   powersave(*), performance.
3935 # Older hardware with acpi-cpufreq driver:
3936 #   ondemand(*), powersave, performance, conservative, schedutil.
3937 # (*) is recommended.
3938 # Hint: use tlp-stat -p to show the active driver and available governors.
3939 # Important:
3940 #   powersave for intel_pstate and ondemand for acpi-cpufreq are power
3941 #   efficient for *almost all* workloads and therefore kernel and most
3942 #   distributions have chosen them as defaults. If you still want to change,
3943 #   you should know what you're doing! You *must* disable your distribution's
3944 #   governor settings or conflicts will occur.
3945 #CPU_SCALING_GOVERNOR_ON_AC=powersave
3946 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
3947
3948 # Set the min/max frequency available for the scaling governor.
3949 # Possible values strongly depend on your CPU. For available frequencies see
3950 # the output of tlp-stat -p.
3951 #CPU_SCALING_MIN_FREQ_ON_AC=0
3952 #CPU_SCALING_MAX_FREQ_ON_AC=0
3953 #CPU_SCALING_MIN_FREQ_ON_BAT=0
3954 #CPU_SCALING_MAX_FREQ_ON_BAT=0
3955
3956 # Set energy performance hints (HWP) for Intel P-state governor:
3957 #   performance, balance_performance, default, balance_power, power
3958 # Values are given in order of increasing power saving.
3959 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
3960 CPU_HWP_ON_AC=balance_performance
3961 CPU_HWP_ON_BAT=balance_power
3962
3963 # Set Intel P-state performance: 0..100 (%).
3964 # Limit the max/min P-state to control the power dissipation of the CPU.
3965 # Values are stated as a percentage of the available performance.
3966 # Requires an Intel Core i processor with intel_pstate driver.
3967 #CPU_MIN_PERF_ON_AC=0
3968 #CPU_MAX_PERF_ON_AC=100
3969 #CPU_MIN_PERF_ON_BAT=0
3970 #CPU_MAX_PERF_ON_BAT=30
3971
3972 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
3973 # Requires an Intel Core i processor.
3974 # Important:
3975 # - This may conflict with your distribution's governor settings
3976 # - A value of 1 does *not* activate boosting, it just allows it
3977 #CPU_BOOST_ON_AC=1
3978 #CPU_BOOST_ON_BAT=0
3979
3980 # Minimize number of used CPU cores/hyper-threads under light load conditions:
3981 #   0=disable, 1=enable.
3982 SCHED_POWERSAVE_ON_AC=0
3983 SCHED_POWERSAVE_ON_BAT=1
3984
3985 # Kernel NMI Watchdog:
3986 #   0=disable (default, saves power), 1=enable (for kernel debugging only).
3987 NMI_WATCHDOG=0
3988
3989 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
3990 # Frequency voltage pairs are written to:
3991 #   /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
3992 # CAUTION: only use this, if you thoroughly understand what you are doing!
3993 #PHC_CONTROLS="F:V F:V F:V F:V"
3994
3995 # Set CPU performance versus energy savings policy:
3996 #   performance, balance-performance, default, balance-power, power.
3997 # Values are given in order of increasing power saving.
3998 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
3999 ENERGY_PERF_POLICY_ON_AC=performance
4000 ENERGY_PERF_POLICY_ON_BAT=balance-power
4001
4002 # Disk devices; separate multiple devices with spaces (default: sda).
4003 # Devices can be specified by disk ID also (lookup with: tlp diskid).
4004 DISK_DEVICES="sda sdb"
4005
4006 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
4007 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
4008 # Separate values for multiple disks with spaces. Use the special value 'keep'
4009 # to keep the hardware default for the particular disk.
4010 DISK_APM_LEVEL_ON_AC="254 254"
4011 DISK_APM_LEVEL_ON_BAT="128 128"
4012
4013 # Hard disk spin down timeout:
4014 #   0:        spin down disabled
4015 #   1..240:   timeouts from 5s to 20min (in units of 5s)
4016 #   241..251: timeouts from 30min to 5.5 hours (in units of 30min)
4017 # See 'man hdparm' for details.
4018 # Separate values for multiple disks with spaces. Use the special value 'keep'
4019 # to keep the hardware default for the particular disk.
4020 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
4021 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
4022
4023 # Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
4024 # Separate values for multiple disks with spaces. Use the special value 'keep'
4025 # to keep the kernel default scheduler for the particular disk.
4026 #DISK_IOSCHED="cfq cfq"
4027
4028 # AHCI link power management (ALPM) for disk devices:
4029 #   min_power, med_power_with_dipm(*), medium_power, max_performance.
4030 # (*) Kernel >= 4.15 required, then recommended.
4031 # Multiple values separated with spaces are tried sequentially until success.
4032 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
4033 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
4034
4035 # Exclude host devices from AHCI link power management.
4036 # Separate multiple hosts with spaces.
4037 #SATA_LINKPWR_BLACKLIST="host1"
4038
4039 # Runtime Power Management for AHCI host and disks devices:
4040 #   on=disable, auto=enable.
4041 # EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
4042 #AHCI_RUNTIME_PM_ON_AC=on
4043 #AHCI_RUNTIME_PM_ON_BAT=on
4044
4045 # Seconds of inactivity before disk is suspended.
4046 AHCI_RUNTIME_PM_TIMEOUT=15
4047
4048 # PCI Express Active State Power Management (PCIe ASPM):
4049 #   default, performance, powersave.
4050 PCIE_ASPM_ON_AC=performance
4051 PCIE_ASPM_ON_BAT=powersave
4052
4053 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
4054 # auto = mid on BAT, high on AC; default = use hardware defaults.
4055 RADEON_POWER_PROFILE_ON_AC=high
4056 RADEON_POWER_PROFILE_ON_BAT=low
4057
4058 # Radeon dynamic power management method (DPM): battery, performance.
4059 RADEON_DPM_STATE_ON_AC=performance
4060 RADEON_DPM_STATE_ON_BAT=battery
4061
4062 # Radeon DPM performance level: auto, low, high; auto is recommended.
4063 RADEON_DPM_PERF_LEVEL_ON_AC=auto
4064 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4065
4066 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4067 WIFI_PWR_ON_AC=off
4068 WIFI_PWR_ON_BAT=on
4069
4070 # Disable wake on LAN: Y/N.
4071 WOL_DISABLE=Y
4072
4073 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4074 # A value of 0 disables, >=1 enables power saving (recommended: 1).
4075 SOUND_POWER_SAVE_ON_AC=0
4076 SOUND_POWER_SAVE_ON_BAT=0
4077
4078 # Disable controller too (HDA only): Y/N.
4079 SOUND_POWER_SAVE_CONTROLLER=N
4080
4081 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4082 # Drive can be powered on again by releasing (and reinserting) the eject lever
4083 # or by pressing the disc eject button on newer models.
4084 # Note: an UltraBay/MediaBay hard disk is never powered off.
4085 BAY_POWEROFF_ON_AC=0
4086 BAY_POWEROFF_ON_BAT=0
4087 # Optical drive device to power off (default sr0).
4088 BAY_DEVICE="sr0"
4089
4090 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4091 RUNTIME_PM_ON_AC=on
4092 RUNTIME_PM_ON_BAT=auto
4093
4094 # Exclude PCI(e) device adresses the following list from Runtime PM
4095 # (separate with spaces). Use lspci to get the adresses (1st column).
4096 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4097 RUNTIME_PM_BLACKLIST="01:00.0"
4098
4099 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4100 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4101 # prevents accidential power-on of dGPU in hybrid graphics setups.
4102 # Use "" to disable the feature completely.
4103 # Separate multiple drivers with spaces.
4104 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4105
4106 # Set to 0 to disable, 1 to enable USB autosuspend feature.
4107 USB_AUTOSUSPEND=1
4108
4109 # Exclude listed devices from USB autosuspend (separate with spaces).
4110 # Use lsusb to get the ids.
4111 # Note: input devices (usbhid) are excluded automatically
4112 #USB_BLACKLIST="1111:2222 3333:4444"
4113
4114 # Bluetooth devices are excluded from USB autosuspend:
4115 #   0=do not exclude, 1=exclude.
4116 USB_BLACKLIST_BTUSB=0
4117
4118 # Phone devices are excluded from USB autosuspend:
4119 #   0=do not exclude, 1=exclude (enable charging).
4120 USB_BLACKLIST_PHONE=0
4121
4122 # Printers are excluded from USB autosuspend:
4123 #   0=do not exclude, 1=exclude.
4124 USB_BLACKLIST_PRINTER=1
4125
4126 # WWAN devices are excluded from USB autosuspend:
4127 #   0=do not exclude, 1=exclude.
4128 USB_BLACKLIST_WWAN=1
4129
4130 # Include listed devices into USB autosuspend even if already excluded
4131 # by the blacklists above (separate with spaces).
4132 # Use lsusb to get the ids.
4133 #USB_WHITELIST="1111:2222 3333:4444"
4134
4135 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4136 # (workaround for USB devices that cause shutdown problems).
4137 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4138
4139 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4140 # on system startup: 0=disable, 1=enable.
4141 # Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4142 #   are ignored when this is enabled!
4143 #RESTORE_DEVICE_STATE_ON_STARTUP=0
4144 RESTORE_DEVICE_STATE_ON_STARTUP=1
4145
4146 # Radio devices to disable on startup: bluetooth, wifi, wwan.
4147 # Separate multiple devices with spaces.
4148 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
4149
4150 # Radio devices to enable on startup: bluetooth, wifi, wwan.
4151 # Separate multiple devices with spaces.
4152 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4153
4154 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4155 # (workaround for devices that are blocking shutdown).
4156 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4157
4158 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4159 # (to prevent other operating systems from missing radios).
4160 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4161
4162 # Radio devices to enable on AC: bluetooth, wifi, wwan.
4163 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4164
4165 # Radio devices to disable on battery: bluetooth, wifi, wwan.
4166 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4167
4168 # Radio devices to disable on battery when not in use (not connected):
4169 #   bluetooth, wifi, wwan.
4170 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4171
4172 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4173 # required). Charging starts when the remaining capacity falls below the
4174 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4175 # Main / Internal battery (values in %)
4176 #START_CHARGE_THRESH_BAT0=75
4177 #STOP_CHARGE_THRESH_BAT0=80
4178 # Ultrabay / Slice / Replaceable battery (values in %)
4179 #START_CHARGE_THRESH_BAT1=75
4180 #STOP_CHARGE_THRESH_BAT1=80
4181
4182 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4183 #RESTORE_THRESHOLDS_ON_BAT=1
4184
4185 # ------------------------------------------------------------------------------
4186 # tlp-rdw - Parameters for the radio device wizard
4187 # Possible devices: bluetooth, wifi, wwan.
4188
4189 # Hints:
4190 # - Parameters are disabled by default, remove the leading # to enable them
4191 # - Separate multiple radio devices with spaces
4192
4193 # Radio devices to disable on connect.
4194 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4195 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4196 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4197
4198 # Radio devices to enable on disconnect.
4199 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4200 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4201 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4202
4203 # Radio devices to enable/disable when docked.
4204 #DEVICES_TO_ENABLE_ON_DOCK=""
4205 #DEVICES_TO_DISABLE_ON_DOCK=""
4206
4207 # Radio devices to enable/disable when undocked.
4208 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4209 #DEVICES_TO_DISABLE_ON_UNDOCK=""
4210 #+end_src
4211
4212 ** X
4213
4214 *** xprofile
4215 :PROPERTIES:
4216 :header-args+: :tangle ~/.xprofile
4217 :END:
4218
4219 =~/.xprofile= is similar in style to =~/.xinitrc=, but on the
4220 contrary, it's automatically sourced by LightDM, my display manager of
4221 choice.
4222
4223 #+begin_src sh :tangle no
4224 xset -b  # disable bell
4225 xset r rate 200 45  # repeat delay (ms) and rate (repeats/sec)
4226
4227 # setxkbmap -option compose:ralt
4228
4229 setxkbmap -option ctrl:nocaps          # turn capslock into control
4230 setxkbmap -option altwin:swap_alt_win  # swap alt and super
4231
4232 if [ $(hostname) = "plasma" ]
4233 then
4234     setxkbmap -option ctrl:rctrl_ralt  # turn right control into right alt
4235 fi
4236
4237 if [ $(hostname) = "enigma" ]
4238 then
4239     xmodmap -e "keycode 135 = Alt_R"  # remap menu key to alt
4240 fi
4241
4242 light -Scrs "intel_backlight" 2
4243
4244 source $HOME/.zprofile
4245
4246 export _JAVA_AWT_WM_NONREPARENTING=1
4247 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4248
4249 if [ $(hostname) = "plasma" ]
4250 then
4251     unlock-def-gk.py &
4252 fi
4253
4254 bspwm &
4255 #+end_src
4256
4257 *** X resources
4258
4259 **** Xresources
4260 :PROPERTIES:
4261 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
4262 :END:
4263
4264 #+begin_src conf-xdefaults
4265 #include ".Xresources.d/fonts"
4266 ! #include ".Xresources.d/colors"
4267 #include ".Xresources.d/emacs"
4268 #include ".Xresources.d/rxvt-unicode"
4269 #+end_src
4270
4271 **** Xresources.d
4272
4273 ***** fonts
4274 :PROPERTIES:
4275 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
4276 :END:
4277
4278 #+begin_src conf-xdefaults
4279 Xft.lcdfilter: lcddefault
4280 Xft.antialias: true
4281 Xft.autohint: 0
4282 Xft.hinting: true
4283 Xft.hintstyle: hintslight
4284 ! Xft.hintstyle: hintfull
4285 Xft.rgba: rgb
4286 Xft.dpi: 96
4287 #+end_src
4288
4289 ***** colors
4290 :PROPERTIES:
4291 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
4292 :END:
4293
4294 #+begin_src conf-xdefaults :tangle no
4295 #include "gruvbox-light.xresources"
4296 ! #include "gruvbox-dark.xresources"
4297 #include "gruvbox-urxvt256.xresources"
4298 #+end_src
4299
4300 #+begin_src conf-xdefaults :tangle no
4301 ! -----------------------------------------------------------------------------
4302 ! File: gruvbox-light.xresources
4303 ! Description: Retro groove colorscheme generalized
4304 ! Author: morhetz <morhetz@gmail.com>
4305 ! Source: https://github.com/morhetz/gruvbox-generalized
4306 ! Last Modified: 6 Sep 2014
4307 ! -----------------------------------------------------------------------------
4308
4309 ! hard contrast: *background: #f9f5d7
4310 *background: #fbf1c7
4311 ! soft contrast: *background: #f2e5bc
4312 *foreground: #3c3836
4313 ! Black + DarkGrey
4314 *color0:  #fdf4c1
4315 *color8:  #928374
4316 ! DarkRed + Red
4317 *color1:  #cc241d
4318 *color9:  #9d0006
4319 ! DarkGreen + Green
4320 *color2:  #98971a
4321 *color10: #79740e
4322 ! DarkYellow + Yellow
4323 *color3:  #d79921
4324 *color11: #b57614
4325 ! DarkBlue + Blue
4326 *color4:  #458588
4327 *color12: #076678
4328 ! DarkMagenta + Magenta
4329 *color5:  #b16286
4330 *color13: #8f3f71
4331 ! DarkCyan + Cyan
4332 *color6:  #689d6a
4333 *color14: #427b58
4334 ! LightGrey + White
4335 *color7:  #7c6f64
4336 *color15: #3c3836
4337 #+end_src
4338
4339 #+begin_src conf-xdefaults :tangle no
4340 ! -----------------------------------------------------------------------------
4341 ! File: gruvbox-dark.xresources
4342 ! Description: Retro groove colorscheme generalized
4343 ! Author: morhetz <morhetz@gmail.com>
4344 ! Source: https://github.com/morhetz/gruvbox-generalized
4345 ! Last Modified: 6 Sep 2014
4346 ! -----------------------------------------------------------------------------
4347
4348 ! hard contrast: *background: #1d2021
4349 *background: #282828
4350 ! soft contrast: *background: #32302f
4351 *foreground: #ebdbb2
4352 ! Black + DarkGrey
4353 *color0:  #282828
4354 *color8:  #928374
4355 ! DarkRed + Red
4356 *color1:  #cc241d
4357 *color9:  #fb4934
4358 ! DarkGreen + Green
4359 *color2:  #98971a
4360 *color10: #b8bb26
4361 ! DarkYellow + Yellow
4362 *color3:  #d79921
4363 *color11: #fabd2f
4364 ! DarkBlue + Blue
4365 *color4:  #458588
4366 *color12: #83a598
4367 ! DarkMagenta + Magenta
4368 *color5:  #b16286
4369 *color13: #d3869b
4370 ! DarkCyan + Cyan
4371 *color6:  #689d6a
4372 *color14: #8ec07c
4373 ! LightGrey + White
4374 *color7:  #a89984
4375 *color15: #ebdbb2
4376 #+end_src
4377
4378 #+begin_src conf-xdefaults :tangle no
4379 ! -----------------------------------------------------------------------------
4380 ! File: gruvbox-urxvt256.xresources
4381 ! Description: Retro groove colorscheme generalized
4382 ! Author: morhetz <morhetz@gmail.com>
4383 ! Source: https://github.com/morhetz/gruvbox-generalized
4384 ! Last Modified: 13 Dec 2013
4385 ! -----------------------------------------------------------------------------
4386
4387 URxvt.color24:  #076678
4388 URxvt.color66:  #427b58
4389 URxvt.color88:  #9d0006
4390 URxvt.color96:  #8f3f71
4391 URxvt.color100: #79740e
4392 URxvt.color108: #8ec07c
4393 URxvt.color109: #83a598
4394 URxvt.color130: #af3a03
4395 URxvt.color136: #b57614
4396 URxvt.color142: #b8bb26
4397 URxvt.color167: #fb4934
4398 URxvt.color175: #d3869b
4399 URxvt.color208: #fe8019
4400 URxvt.color214: #fabd2f
4401 URxvt.color223: #ebdbb2
4402 URxvt.color228: #f2e5bc
4403 URxvt.color229: #fbf1c7
4404 URxvt.color230: #f9f5d7
4405 URxvt.color234: #1d2021
4406 URxvt.color235: #282828
4407 URxvt.color236: #32302f
4408 URxvt.color237: #3c3836
4409 URxvt.color239: #504945
4410 URxvt.color241: #665c54
4411 URxvt.color243: #7c6f64
4412 URxvt.color244: #928374
4413 URxvt.color245: #928374
4414 URxvt.color246: #a89984
4415 URxvt.color248: #bdae93
4416 URxvt.color250: #d5c4a1
4417 #+end_src
4418
4419 ***** emacs
4420 :PROPERTIES:
4421 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
4422 :END:
4423
4424 #+begin_src conf-xdefaults
4425 Emacs.menuBar: off
4426 Emacs.toolBar: off
4427 Emacs.verticalScrollBars: off
4428 Emacs.cursorBlink: off
4429 Emacs.FontBackend: xft,x
4430 ! Emacs.font: Ubuntu Mono-12
4431 ! Emacs.font: Triplicate T4C-11
4432 ! Emacs.font: Ubuntu Mono-10.5
4433 ! Emacs.font: Ubuntu Mono-12
4434 ! Emacs.font: Iosevka-11
4435
4436 ! Emacs.font: Fira Mono:size=15
4437 ! Emacs.font: DejaVu Sans Mono:size=15
4438 ! Emacs.font: Inconsolata:size=17
4439 ! Emacs.font: Inconsolata:size=16
4440 ! Emacs.font: Inconsolata LGC:size=14
4441 ! Emacs.font: Source Code Pro Medium-10.5
4442 Emacs.font: Ubuntu Mono:size=16
4443 ! Emacs.font: Iosevka:size=16
4444 #+end_src
4445
4446 ***** rxvt-unicode
4447 :PROPERTIES:
4448 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
4449 :END:
4450
4451 #+begin_src conf-xdefaults
4452 ! Font
4453 URxvt.font:             xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
4454 URxvt.boldFont:         xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
4455 URxvt.italicFont:       xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
4456 URxvt.bolditalicFont:   xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
4457
4458 URxvt.xftAntialias:     true
4459 URxvt.letterSpace:      0
4460
4461 URxvt.depth:                0
4462 URxvt.loginShell:           true
4463 URxvt.saveLines:            100000
4464 URxvt.internalBorder:       3
4465 URxvt.lineSpace:            0
4466 URxvt.scrollBar:            false
4467 URxvt.scrollStyle:          rxvt
4468 URxvt*scrollTtyOutput:      false
4469 URxvt*scrollWithBuffer:     true
4470 URxvt*scrollTtyKeypress:    true
4471 URxvt.keysym.Shift-Up:      command:\033]720;1\007
4472 URxvt.keysym.Shift-Down:    command:\033]721;1\007
4473
4474 URxvt.perl-ext-common:      default,clipboard,url-select,keyboard-select
4475 URxvt.perl-ext:             bidi
4476 URxvt.bidi.enabled:         1
4477 URxvt.url-select.launcher:  firefox
4478 URxvt.url-select.underline: true
4479 URxvt.keysym.M-u:           perl:url-select:select_next
4480 URxvt.keysym.M-Escape:      perl:keyboard-select:activate
4481 URxvt.keysym.M-s:           perl:keyboard-select:search
4482 URxvt.url-launcher:         /usr/bin/firefox
4483 URxvt.matcher.button:       1
4484 URxvt.iso14755:             false
4485 URxvt.iso14755_53:          false
4486 URxvt.keysym.M-c:           perl:clipboard:copy
4487 URxvt.keysym.M-v:           perl:clipboard:paste
4488 URxvt.keysym.C-A-V:         perl:clipboard:paste_escaped
4489 URxvt.keysym.C-Up:          font-size:increase
4490 URxvt.keysym.C-Down:        font-size:decrease
4491 URxvt.keysym.C-S-Up:        font-size:incglobal
4492 URxvt.keysym.C-S-Down:      font-size:decglobal
4493 URxvt.keysym.C-equal:       font-size:reset
4494 !URxvt.keysym.C-question:   font-size:show
4495
4496 URxvt.iconFile:             /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
4497
4498 !urxvt*foreground: white
4499 !urxvt*background: black
4500
4501 !*color0:  #2E3436
4502 !*color1:  #a40000
4503 !*color2:  #4E9A06
4504 !*color3:  #C4A000
4505 !*color4:  #3465A4
4506 !*color5:  #75507B
4507 !*color6:  #ce5c00
4508 !*color7:  #babdb9
4509 !*color8:  #555753
4510 !*color9:  #EF2929
4511 !*color10: #8AE234
4512 !*color11: #FCE94F
4513 !*color12: #729FCF
4514 !*color13: #AD7FA8
4515 !*color14: #fcaf3e
4516 !*color15: #EEEEEC
4517
4518 !URxvt.foreground: #C8C8C8
4519 !URxvt.background: #FFFFFF
4520
4521 !! black
4522 !*color0:  #2E3436
4523 !*color8:  #555753
4524 !! red
4525 !*color1:  #a40000
4526 !*color9:  #EF2929
4527 !! green
4528 !*color2:  #4E9A06
4529 !*color10: #8AE234
4530 !! yellow
4531 !*color3:  #C4A000
4532 !*color11: #FCE94F
4533 !! blue
4534 !*color4:  #3465A4
4535 !*color12: #729FCF
4536 !! purple
4537 !*color5:  #75507B
4538 !*color13: #AD7FA8
4539 !! orange (replaces cyan)
4540 !*color6:  #ce5c00
4541 !*color14: #fcaf3e
4542 !! white
4543 !*color7:  #babdb9
4544 !*color15: #EEEEEC
4545
4546 ! Tango colour theme for rxvt-unicode
4547 URxvt.background: #FFFFFF
4548 URxvt.foreground: #000000
4549
4550 ! Black
4551 URxvt.color0: #2E3436
4552 URxvt.color8: #757773
4553
4554 ! Red
4555 URxvt.color1: #CC0000
4556 URxvt.color9: #EF2929
4557
4558 ! Green
4559 URxvt.color2: #4E9A06
4560 URxvt.color10: #8AE234
4561
4562 ! Yellow
4563 URxvt.color3: #C4A000
4564 URxvt.color11: #FCE94F
4565
4566 ! Blue
4567 URxvt.color4: #3465A4
4568 URxvt.color12: #729FCF
4569
4570 ! Magenta
4571 URxvt.color5: #75507B
4572 URxvt.color13: #AD7FA8
4573
4574 !! Cyan
4575 !URxvt.color6: #06989A
4576 !URxvt.color14: #34E2E2
4577 ! orange (replaces cyan)
4578 *color6:  #ce5c00
4579 *color14: #fcaf3e
4580
4581 ! White
4582 URxvt.color7: #D3D7CF
4583 URxvt.color15: #EEEEEC
4584 #+end_src
4585
4586 ** XDG
4587 :PROPERTIES:
4588 :header-args+: :tangle ~/.config/user-dirs.dirs
4589 :END:
4590
4591 #+begin_src conf
4592 XDG_DESKTOP_DIR="$HOME/Desktop"
4593 XDG_DOCUMENTS_DIR="$HOME/usr/docs"
4594 XDG_DOWNLOAD_DIR="$HOME/usr/dls"
4595 XDG_MUSIC_DIR="$HOME/usr/music"
4596 XDG_PICTURES_DIR="$HOME/usr/pics"
4597 XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
4598 XDG_TEMPLATES_DIR="$HOME/usr/Templates"
4599 XDG_VIDEOS_DIR="$HOME/usr/vids"
4600 #+end_src
4601
4602 ** Zathura
4603 :PROPERTIES:
4604 :header-args+: :tangle ~/.config/zathura/zathurarc
4605 :END:
4606
4607 #+begin_src conf
4608 set smooth-scroll true
4609 set selection-clipboard clipboard
4610 set zoom-step 05
4611 set default-bg "#272727"
4612 set statusbar-bg "#272727"
4613 set inputbar-bg "#373737"
4614 #+end_src
4615
4616 ** Zsh
4617
4618 My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
4619 [[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
4620 installed.
4621
4622 *** zimrc
4623 :PROPERTIES:
4624 :header-args+: :tangle ~/.zimrc
4625 :END:
4626
4627 #+begin_src sh
4628
4629
4630 #################
4631 # CORE SETTINGS #
4632 #################
4633
4634 #
4635 # Zim settings
4636 #
4637
4638 # Select what modules you would like enabled.
4639 # The second line of modules may depend on options set by modules in the first
4640 # line. These dependencies are noted on the respective module's README.md.
4641 zmodules=(directory environment git git-info history input ssh utility custom \
4642           syntax-highlighting history-substring-search prompt completion)
4643
4644
4645 ###################
4646 # MODULE SETTINGS #
4647 ###################
4648
4649 #
4650 # Prompt
4651 #
4652
4653 # Set your desired prompt here
4654 zprompt_theme='pure'
4655 #PURE_PROMPT_SYMBOL=λ
4656 #PURE_PROMPT_SYMBOL=δ
4657 PURE_PROMPT_SYMBOL=➜
4658
4659 #
4660 # Completion
4661 #
4662
4663 # set an optional host-specific filename for the completion cache file
4664 # if none is provided, the default '.zcompdump' is used.
4665 #zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
4666
4667 #
4668 # Utility
4669 #
4670
4671 # Uncomment to enable command correction prompts
4672 # See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
4673 setopt CORRECT
4674
4675 #
4676 # Environment
4677 #
4678
4679 # Set the string below to the desired terminal title format string.
4680 # The terminal title is redrawn upon directory change, however, variables like
4681 # ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
4682 #   http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
4683 # The example below uses the following format: 'username@host:/current/directory'
4684 ztermtitle='%n@%m:%~'
4685
4686 #
4687 # Input
4688 #
4689
4690 # Uncomment to enable double-dot expansion.
4691 # This appends '../' to your input for each '.' you type after an initial '..'
4692 #zdouble_dot_expand='true'
4693
4694 #
4695 # Syntax-Highlighting
4696 #
4697
4698 # This determines what highlighters will be used with the syntax-highlighting module.
4699 # Documentation of the highlighters can be found here:
4700 #   https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
4701 # For (u)rxvt, termite and gnome-terminal users,
4702 # removing the 'cursor' highlighter will fix the disappearing cursor problem
4703 #zhighlighters=(main brackets cursor)
4704 zhighlighters=(main brackets pattern)
4705
4706
4707 #
4708 # SSH
4709 #
4710
4711 # Load these ssh identities with the ssh module
4712 zssh_ids=(id_rsa plasma_id_rsa id_ed25519 id_rsa_aur)
4713
4714
4715 #
4716 # Pacman
4717 #
4718
4719 # Set (optional) pacman front-end.
4720 zpacman_frontend='yay'
4721
4722 # Load any helper scripts as defined here
4723 #zpacman_helper=(aur)
4724 #+end_src
4725
4726 *** zlogin
4727 :PROPERTIES:
4728 :header-args+: :tangle ~/.zlogin
4729 :END:
4730
4731 #+begin_src sh
4732
4733
4734 #
4735 # User configuration sourced by login shells
4736 #
4737
4738 # Initialize zim
4739 [[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
4740 #+end_src
4741
4742 *** zprofile
4743 :PROPERTIES:
4744 :header-args+: :tangle ~/.zprofile
4745 :END:
4746
4747 #+begin_src sh
4748 #PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
4749 #PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
4750 export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
4751 export XDG_CONFIG_HOME=$HOME/.config
4752 export XDG_DATA_HOME=$HOME/.local/share
4753 export XDG_DATA_DIRS=/usr/local/share:/usr/share
4754 export MAILDIR="$HOME/mail"
4755 export CVS_RSH=ssh
4756 #export MATHMODELS=$HOME/src/eiffel/mathmodels
4757 #export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
4758 #export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
4759
4760 # Eiffel2Java stuff
4761 #export JAVA_HOME=/usr/lib/jvm/default
4762 #export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
4763 #export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4764 #export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4765
4766 #export PATH="$HOME/usr/build/pvs:$PATH"
4767 #export SBCLISP_HOME=/usr/share/sbcl-source
4768 #export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
4769
4770 export MOZ_USE_XINPUT2=1  # precise scrolling in firefox
4771
4772 #export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
4773 #export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
4774
4775 if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
4776 #+end_src
4777
4778 *** zshenv
4779 :PROPERTIES:
4780 :header-args+: :tangle ~/.zshenv
4781 :END:
4782
4783 #+begin_src sh
4784 # Ensure that a non-login, non-interactive shell has a defined environment.
4785 if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
4786   source "${ZDOTDIR:-$HOME}/.zprofile"
4787 fi
4788 #+end_src
4789
4790 *** zshrc
4791 :PROPERTIES:
4792 :header-args+: :tangle ~/.zshrc
4793 :END:
4794
4795 #+begin_src sh
4796 # Bash-like navigation
4797 #export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
4798 #export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
4799 export WORDCHARS='*?[]~=&;!#$%^(){}<>'
4800 #ZLE_SPACE_SUFFIX_CHARS=$'|&'
4801
4802 #disable -r time       # disable shell reserved word
4803 #alias time='time -p'  # -p for POSIX output
4804
4805 # rehash if last command was pacaur or pacman
4806 # (so that zsh picks up changes in $PATH immediately)
4807 TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
4808
4809 #
4810 # User configuration sourced by interactive shells
4811 #
4812
4813 # Change default zim location
4814 export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
4815
4816 # Start zim
4817 [[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
4818
4819 ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
4820 #ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
4821
4822 setopt globdots
4823
4824 source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
4825 source ~/.zsh/zsh-autopair/autopair.zsh
4826
4827
4828 ### fzf ###
4829
4830 source /usr/share/fzf/key-bindings.zsh
4831 source /usr/share/fzf/completion.zsh
4832
4833 # Accept history selection instead of putting it on
4834 # the command line
4835 fzf-history-widget-accept() {
4836   fzf-history-widget
4837   zle accept-line
4838 }
4839 #zle     -N   fzf-history-widget-accept
4840 #bindkey '^R' fzf-history-widget-accept
4841
4842 # alt+c preview
4843 export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
4844
4845 ### fzf ###
4846
4847
4848 # aliases
4849 alias mpv="mpv --ytdl-format mp4"
4850 alias mv="mv -iv"
4851 alias cp="cp -iv"
4852 alias scl=systemctl
4853 alias jcl=journalctl
4854 alias m="mbsync -Va; getmail; notmuch new"
4855 alias best="youtube-dl -f best"
4856 alias nixx="ssh amin@nix.aminb.org"
4857 alias fence="ssh aminb@fencepost.gnu.org"
4858
4859 aur() {
4860    cd ~/usr/build
4861    git clone https://aur.archlinux.org/${1}.git
4862    cd ${1}
4863 }
4864
4865 # i-beam cursor
4866 echo -e "\033[5 q"
4867 #echo -e "\033[6 q"
4868 #+end_src
4869
4870 * Scripts
4871
4872 This section contains various useful scripts and the ones used by the
4873 programs above. For instance, =toggle-tablet= for switching to and
4874 from tablet mode on my X220T, =toggle-presentation-mode= for toggling
4875 Xfce's presentation mode which keeps the screen awake, and
4876 =rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
4877 exact brightness value.
4878
4879 ** battery-percentage-time
4880 :PROPERTIES:
4881 :header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/bash"
4882 :END:
4883
4884 #+begin_src bash
4885 pct=$(upower -i /org/freedesktop/UPower/devices/battery_BAT0 | grep percentage | awk '{print $2}')
4886 time=$(upower -i /org/freedesktop/UPower/devices/battery_BAT0 | grep time | awk '{print $4,$5}')
4887 echo "$pct ($time)"
4888 #+end_src
4889
4890 ** rofi-light
4891 :PROPERTIES:
4892 :header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
4893 :END:
4894
4895 #+begin_src bash
4896 cur=$(light -G)
4897 val=$(rofi -dmenu -mesg "light    $cur" -p "light -S " -l 0 -width 12)
4898 light -S $val
4899 #+end_src
4900
4901 ** s (run sway)
4902 :PROPERTIES:
4903 :header-args+: :tangle ~/.local/bin/s :shebang "#!/bin/bash"
4904 :END:
4905
4906 #+begin_src bash
4907 export _JAVA_AWT_WM_NONREPARENTING=1
4908 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4909 light -Scrs "intel_backlight" 2
4910 source $HOME/.zprofile
4911 sway
4912 #+end_src
4913
4914 ** sway-ws-util
4915 :PROPERTIES:
4916 :header-args+: :tangle ~/.local/bin/sway-ws-util :shebang "#!/bin/bash"
4917 :END:
4918
4919 #+begin_src bash
4920 curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name')
4921 [[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1))
4922 [[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1))
4923 dest_ws=-1
4924 op=-1
4925
4926 if [ "$1" = "switch" ] || [ "$1" = "move" ]; then
4927   op="$1"
4928   if [ "$2" = "prev" ]; then
4929     dest_ws="$prev_ws"
4930   elif [ "$2" = "next" ]; then
4931     dest_ws="$next_ws"
4932   else
4933     echo "Usage: $0 $1 {prev|next} [follow]"
4934     exit 1
4935   fi
4936 else
4937   echo "Usage: $0 {switch|move} {prev|next} [follow]"
4938   exit 1
4939 fi
4940
4941 if [ "$op" = "switch" ]; then
4942   sway workspace "$dest_ws"
4943 elif [ "$op" = "move" ]; then
4944   sway move container to workspace "$dest_ws"
4945   if [ "$3" = "follow" ]; then
4946     sway workspace "$dest_ws"
4947   fi
4948 fi
4949 #+end_src
4950
4951 ** toggle-layout
4952 :PROPERTIES:
4953 :header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
4954 :END:
4955
4956 #+begin_src bash
4957 lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
4958
4959 if [ "$lang" = "us" ]; then
4960     setxkbmap ir
4961 else
4962     setxkbmap us
4963     # xmodmap $HOME/.Xmodmap
4964 fi
4965 #+end_src
4966
4967 ** toggle-presentation-mode
4968 :PROPERTIES:
4969 :header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
4970 :END:
4971
4972 #+begin_src bash
4973 xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
4974 #+end_src
4975
4976 ** toggle-tablet
4977 :PROPERTIES:
4978 :header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
4979 :END:
4980
4981 This script toggles between a 'normal' mode and a 'tablet' mode, doing
4982 a few things:
4983
4984 - rotates the screen using =xrandr=, so that rotating the physical
4985   display of my X220t would have the laptop's battery on the right
4986   hand side,
4987 - enables touch screen,
4988 - properly rotates the stylus pen and touch screen pointers, and
4989 - toggles between RGB and Vertical BGR sub-pixel order.
4990
4991 #+begin_src bash
4992 case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
4993     0)  # Screen is not rotated, we should rotate it right (90°)
4994            xrandr -o 3
4995            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
4996            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
4997            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
4998            xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
4999            ;;
5000     1)  # Currently top is rotated right, we should set it normal (0°)
5001           xrandr -o 0
5002           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
5003           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
5004           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
5005           xfconf-query -c xsettings -p /Xft/RGBA -s rgb
5006           ;;
5007     *)
5008            echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
5009            exit 1
5010            ;;
5011 esac
5012 #+end_src
5013
5014 ** unlock-def-gk.py
5015 :PROPERTIES:
5016 :header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
5017 :END:
5018
5019 #+begin_src python
5020 import gnomekeyring as gk
5021 # list_item_ids_sync('login')[0] == 1L
5022 gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
5023 #+end_src
5024
5025 ** wp
5026
5027 My little wallpaper changer script.
5028
5029 *** wp
5030 :PROPERTIES:
5031 :header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
5032 :END:
5033
5034 #+begin_src bash :tangle no
5035 export DISPLAY=:0
5036
5037 case "$1" in
5038   "day")
5039     feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5040     ;;
5041   "night")
5042     feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5043     ;;
5044   *)
5045     echo $"Usage: $0 {day|night}"
5046     exit 1
5047 esac
5048 #+end_src
5049
5050 *** wp-auto
5051 :PROPERTIES:
5052 :header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
5053 :END:
5054
5055 #+begin_src bash :tangle no
5056 SED=$(which sed)
5057 ROFI=$(which rofi)
5058
5059 export DISPLAY=:0
5060 HOUR=$(date +%H)
5061
5062 if [ -z "${SED}" ]
5063 then
5064     echo "Did not find 'sed', script cannot continue."
5065     exit 1
5066 fi
5067 if [ -z "${ROFI}" ]
5068 then
5069     echo "Did not find rofi, there is no point to continue."
5070     exit 1
5071 fi
5072
5073 ###
5074 # Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
5075 # Repeated calls should leave the config clean-ish
5076 ###
5077 function set_theme()
5078 {
5079     CDIR="${HOME}/.config/rofi/"
5080     if [ ! -d "${CDIR}" ]
5081     then
5082         mkdir -p ${CDIR}
5083     fi
5084     if [ -f "${CDIR}/config" ]
5085     then
5086         ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
5087     fi
5088     echo "rofi.theme: ${1}" >> "${CDIR}/config"
5089
5090 }
5091
5092 if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
5093     then
5094         feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5095         xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
5096         set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
5097     else
5098         feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5099         xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
5100         set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
5101 fi
5102 #+end_src
5103
5104 *** wp.service
5105 :PROPERTIES:
5106 :header-args+: :tangle ~/.config/systemd/user/wp.service
5107 :END:
5108
5109 #+begin_src conf :tangle no
5110 [Unit]
5111 Description=wallpaper service
5112
5113 [Service]
5114 Type=oneshot
5115 ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
5116 #+end_src
5117
5118 *** wp.timer
5119 :PROPERTIES:
5120 :header-args+: :tangle ~/.config/systemd/user/wp.timer
5121 :END:
5122
5123 #+begin_src conf :tangle no
5124 [Unit]
5125 [Unit]
5126 Description=wallpaper timer
5127
5128 [Timer]
5129 OnCalendar=07,21:00
5130 Unit=wp.service
5131 Persistent=true
5132
5133 [Install]
5134 WantedBy=timers.target
5135 #+end_src
5136
5137 ** zathura-sync.sh
5138 :PROPERTIES:
5139 :header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
5140 :END:
5141
5142 #+begin_src sh
5143 pos="$1"
5144 pdffile="$2"
5145 zathura --synctex-forward "$pos" "$pdffile" || \
5146     (
5147     zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
5148     sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
5149 #+end_src
5150 ** Fun :)
5151
5152 *** eat-em
5153 :PROPERTIES:
5154 :header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
5155 :END:
5156
5157 #+begin_src sh
5158 # Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5159 # [ESC] character in original post removed here.
5160
5161 # ANSI Color -- use these variables to easily have different color
5162 #    and format output. Make sure to output the reset sequence after
5163 #    colors (f = foreground, b = background), and use the 'off'
5164 #    feature for anything you turn on.
5165
5166 initializeANSI()
5167 {
5168  esc="$(echo -en '\e')"
5169
5170   blackf="${esc}[30m";   redf="${esc}[31m";    greenf="${esc}[32m"
5171   yellowf="${esc}[33m"   bluef="${esc}[34m";   purplef="${esc}[35m"
5172   cyanf="${esc}[36m";    whitef="${esc}[37m"
5173
5174   blackb="${esc}[40m";   redb="${esc}[41m";    greenb="${esc}[42m"
5175   yellowb="${esc}[43m"   blueb="${esc}[44m";   purpleb="${esc}[45m"
5176   cyanb="${esc}[46m";    whiteb="${esc}[47m"
5177
5178   boldon="${esc}[1m";    boldoff="${esc}[22m"
5179   italicson="${esc}[3m"; italicsoff="${esc}[23m"
5180   ulon="${esc}[4m";      uloff="${esc}[24m"
5181   invon="${esc}[7m";     invoff="${esc}[27m"
5182
5183   reset="${esc}[0m"
5184 }
5185
5186 # note in this first use that switching colors doesn't require a reset
5187 # first - the new color overrides the old one.
5188
5189 #clear
5190
5191 initializeANSI
5192
5193 cat << EOF
5194
5195  ${yellowf}  ▄███████▄${reset}   ${redf}  ▄██████▄${reset}    ${greenf}  ▄██████▄${reset}    ${bluef}  ▄██████▄${reset}    ${purplef}  ▄██████▄${reset}    ${cyanf}  ▄██████▄${reset}
5196  ${yellowf}▄█████████▀▀${reset}  ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset}  ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset}  ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset}  ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset}  ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5197  ${yellowf}███████▀${reset}      ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset}  ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset}  ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset}  ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset}  ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5198  ${yellowf}███████▄${reset}      ${redf}████████████${reset}  ${greenf}████████████${reset}  ${bluef}████████████${reset}  ${purplef}████████████${reset}  ${cyanf}████████████${reset}
5199  ${yellowf}▀█████████▄▄${reset}  ${redf}██▀██▀▀██▀██${reset}  ${greenf}██▀██▀▀██▀██${reset}  ${bluef}██▀██▀▀██▀██${reset}  ${purplef}██▀██▀▀██▀██${reset}  ${cyanf}██▀██▀▀██▀██${reset}
5200  ${yellowf}  ▀███████▀${reset}   ${redf}▀   ▀  ▀   ▀${reset}  ${greenf}▀   ▀  ▀   ▀${reset}  ${bluef}▀   ▀  ▀   ▀${reset}  ${purplef}▀   ▀  ▀   ▀${reset}  ${cyanf}▀   ▀  ▀   ▀${reset}
5201
5202  ${boldon}${yellowf}  ▄███████▄   ${redf}  ▄██████▄    ${greenf}  ▄██████▄    ${bluef}  ▄██████▄    ${purplef}  ▄██████▄    ${cyanf}  ▄██████▄${reset}
5203  ${boldon}${yellowf}▄█████████▀▀  ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄  ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄  ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄  ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄  ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5204  ${boldon}${yellowf}███████▀      ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███  ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███  ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███  ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███  ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5205  ${boldon}${yellowf}███████▄      ${redf}████████████  ${greenf}████████████  ${bluef}████████████  ${purplef}████████████  ${cyanf}████████████${reset}
5206  ${boldon}${yellowf}▀█████████▄▄  ${redf}██▀██▀▀██▀██  ${greenf}██▀██▀▀██▀██  ${bluef}██▀██▀▀██▀██  ${purplef}██▀██▀▀██▀██  ${cyanf}██▀██▀▀██▀██${reset}
5207  ${boldon}${yellowf}  ▀███████▀   ${redf}▀   ▀  ▀   ▀  ${greenf}▀   ▀  ▀   ▀  ${bluef}▀   ▀  ▀   ▀  ${purplef}▀   ▀  ▀   ▀  ${cyanf}▀   ▀  ▀   ▀${reset}
5208
5209 EOF
5210 #+end_src
5211
5212 *** invade-em
5213 :PROPERTIES:
5214 :header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
5215 :END:
5216
5217 #+begin_src bash
5218 #
5219 # ANSI color scheme script featuring Space Invaders
5220 #
5221 # Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5222 # Modified by lolilolicon
5223 #
5224
5225 f=3 b=4
5226 for j in f b; do
5227   for i in {0..7}; do
5228     printf -v $j$i %b "\e[${!j}${i}m"
5229   done
5230 done
5231 bld=$'\e[1m'
5232 rst=$'\e[0m'
5233
5234 cat << EOF
5235
5236  $f1  ▀▄   ▄▀     $f2 ▄▄▄████▄▄▄    $f3  ▄██▄     $f4  ▀▄   ▄▀     $f5 ▄▄▄████▄▄▄    $f6  ▄██▄  $rst
5237  $f1 ▄█▀███▀█▄    $f2███▀▀██▀▀███   $f3▄█▀██▀█▄   $f4 ▄█▀███▀█▄    $f5███▀▀██▀▀███   $f6▄█▀██▀█▄$rst
5238  $f1█▀███████▀█   $f2▀▀███▀▀███▀▀   $f3▀█▀██▀█▀   $f4█▀███████▀█   $f5▀▀███▀▀███▀▀   $f6▀█▀██▀█▀$rst
5239  $f1▀ ▀▄▄ ▄▄▀ ▀   $f2 ▀█▄ ▀▀ ▄█▀    $f3▀▄    ▄▀   $f4▀ ▀▄▄ ▄▄▀ ▀   $f5 ▀█▄ ▀▀ ▄█▀    $f6▀▄    ▄▀$rst
5240
5241  $bld$f1▄ ▀▄   ▄▀ ▄   $f2 ▄▄▄████▄▄▄    $f3  ▄██▄     $f4▄ ▀▄   ▄▀ ▄   $f5 ▄▄▄████▄▄▄    $f6  ▄██▄  $rst
5242  $bld$f1█▄█▀███▀█▄█   $f2███▀▀██▀▀███   $f3▄█▀██▀█▄   $f4█▄█▀███▀█▄█   $f5███▀▀██▀▀███   $f6▄█▀██▀█▄$rst
5243  $bld$f1▀█████████▀   $f2▀▀▀██▀▀██▀▀▀   $f3▀▀█▀▀█▀▀   $f4▀█████████▀   $f5▀▀▀██▀▀██▀▀▀   $f6▀▀█▀▀█▀▀$rst
5244  $bld$f1 ▄▀     ▀▄    $f2▄▄▀▀ ▀▀ ▀▀▄▄   $f3▄▀▄▀▀▄▀▄   $f4 ▄▀     ▀▄    $f5▄▄▀▀ ▀▀ ▀▀▄▄   $f6▄▀▄▀▀▄▀▄$rst
5245
5246
5247                                      $f7▌$rst
5248
5249                                    $f7▌$rst
5250
5251                               $f7    ▄█▄    $rst
5252                               $f7▄█████████▄$rst
5253                               $f7▀▀▀▀▀▀▀▀▀▀▀$rst
5254
5255 EOF
5256 #+end_src