git.shemshak.org - ~bandali/configs/blob - rc.org

   1 #+title: rc.org
   2 #+property: header-args :comments link :mkdirp yes :results silent
   3
   4 * About
   5
   6 This org file contains the configuration files of pretty much every
   7 program I use. The files are tangled (i.e. exported, or derived) from
   8 this file using =org-babel=.
   9
  10 Note: This file is best viewed inside Emacs with org mode.
  11
  12 * Configs
  13
  14 This section contains the configuration files (dotfiles) of various
  15 programs I use.
  16
  17 ** bspwm
  18
  19 *** bspwmrc
  20 :PROPERTIES:
  21 :header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
  22 :END:
  23
  24 #+begin_src sh :tangle no
  25 sxhkd &
  26 sh ~/.fehbg &
  27 xfce4-panel -d &
  28 compton &
  29 sleep 0.5 && pasystray --notify=all &
  30
  31 bspc monitor -d I II III IV V VI VII VIII IX X
  32 #bspc monitor eDP-1 -d I II III IV V
  33 #bspc monitor HDMI-1 -d VI VII VIII IX X
  34
  35 #bspc config border_width         2
  36 #bspc config window_gap           8
  37 bspc config window_gap           0
  38
  39 bspc config bottom_padding 26
  40
  41 bspc config split_ratio          0.52
  42 bspc config borderless_monocle   true
  43 bspc config gapless_monocle      true
  44 bspc config click_to_focus       button1
  45 bspc config directional_focus_tightness low
  46
  47 #bspc rule -a Firefox desktop='^1' follow=on
  48 bspc rule -a Nightly desktop='^1' follow=on
  49 bspc rule -a Emacs desktop='^2' state=tiled follow=on
  50 #bspc rule -a Chromium desktop='^4' follow=on
  51 bspc rule -a URxvt state=floating
  52 bspc rule -a URxvt:tiled state=tiled
  53 bspc rule -a Connman-gtk state=floating
  54 bspc rule -a Xfce4-panel state=floating
  55 bspc rule -a TelegramDesktop state=floating
  56 bspc rule -a Ec state=floating
  57 bspc rule -a Pavucontrol state=floating
  58 bspc rule -a Eog state=floating
  59 bspc rule -a Seahorse state=floating
  60 bspc rule -a mpv state=floating
  61 bspc rule -a Evince state=floating
  62 bspc rule -a Meld state=floating
  63 bspc rule -a Autokey-gtk state=floating
  64 bspc rule -a Mousepad state=floating
  65 bspc rule -a Wrapper-1.0 state=floating
  66 bspc rule -a File-roller state=floating
  67 bspc rule -a Gnome-disks state=floating
  68 bspc rule -a Termite state=floating
  69 bspc rule -a Termite:tiled state=tiled
  70 bspc rule -a Thunderbird:Calendar state=floating
  71 bspc rule -a Audacity state=floating
  72 bspc rule -a Proof state=floating # pvs x-show-proof
  73 bspc rule -a Nm-connection-editor state=floating
  74 bspc rule -a Wire state=floating
  75 bspc rule -a discord state=floating
  76 bspc rule -a X2goclient state=floating
  77 bspc rule -a SimpleScreenRecorder state=floating
  78 bspc rule -a Gimp state=floating
  79 bspc rule -a Wrapper-2.0 state=floating
  80 bspc rule -a Zathura state=tiled
  81 #+end_src
  82
  83 *** sxhkdrc
  84 :PROPERTIES:
  85 :header-args+: :tangle ~/.config/sxhkd/sxhkdrc
  86 :END:
  87
  88 #+begin_src conf :tangle no
  89 #
  90 # wm independent hotkeys
  91 #
  92
  93 # terminal emulator
  94 super + {_,shift} + Return
  95         urxvt{_, -name tiled}
  96
  97 #super + {_,shift} + Return
  98 #       termite{_, --name=tiled}
  99
 100 # program launcher
 101 super + space
 102         rofi -show run -display-run '> ' -display-window ' 🗔 '
 103
 104 super + alt + space
 105         xfce4-popup-whiskermenu
 106
 107 # window finder
 108 super + backslash
 109         rofi -show window  -display-run '> ' -display-window ' 🗔 '
 110
 111 # password manager
 112 alt + space
 113         rofi-pass
 114
 115 # firefox
 116 #super + r
 117 #       firefox
 118
 119 # chromium
 120 #super + c
 121 #       chromium -incognito
 122
 123 # emacs
 124 super + e
 125         emacs
 126
 127 # make sxhkd reload its configuration files:
 128 super + Escape
 129         pkill -USR1 -x sxhkd
 130
 131 # volume {up,down}
 132 XF86Audio{Raise,Lower}Volume
 133         pamixer --allow-boost --{in,de}crease 5
 134
 135 # mute
 136 XF86AudioMute
 137         pamixer --toggle-mute
 138
 139 XF86AudioMicMute
 140         pactl set-source-mute 1 toggle
 141
 142 # playback control
 143 XF86Audio{Play,Prev,Next}
 144         mpc {toggle,prev,next}
 145
 146 # lock the screen
 147 super + shift + q
 148         light-locker-command -l
 149
 150 # Toggle keyboard layout
 151 super + F7
 152         toggle-layout
 153
 154 # Toggle Xfce presentation mode
 155 XF86LaunchB
 156         toggle-presentation-mode
 157
 158 # monitor brightness
 159 XF86MonBrightness{Up,Down}
 160         light -{A,U} 5
 161
 162 super + apostrophe
 163         rofi-light
 164
 165 # keyboard brightness
 166 #XF86KbdBrightness{Up,Down}
 167 #       kbdlight {up,down}
 168
 169 XF86RotateWindows
 170         toggle-tablet
 171
 172 #
 173 # bspwm hotkeys
 174 #
 175
 176 # quit bspwm normally
 177 super + alt + Escape
 178         bspc quit
 179
 180 # close and kill
 181 super + {w,q}
 182         bspc node -{c,k}
 183
 184 # alternate between the tiled and monocle layout
 185 super + m
 186         bspc desktop -l next
 187
 188 # send the newest marked node to the newest preselected node
 189 super + y
 190         bspc node newest.marked.local -n newest.!automatic.local
 191
 192 # swap the current node and the biggest node
 193 super + g
 194         bspc node -s biggest
 195
 196 #
 197 # state/flags
 198 #
 199
 200 # set the window state
 201 super + {t,shift + t,s,f}
 202         bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
 203
 204 # set the node flags
 205 super + ctrl + {m,x,y,z}
 206         bspc node -g {marked,locked,sticky,private}
 207
 208 #
 209 # focus/swap
 210 #
 211
 212 # focus the node in the given direction
 213 super + {_,shift + }{h,j,k,l}
 214         bspc node -{f,s} {west,south,north,east}
 215
 216 # focus the node for the given path jump
 217 super + {p,b,comma,period}
 218         bspc node -f @{parent,brother,first,second}
 219
 220 # focus the next/previous node in the current desktop
 221 super + {_,shift + }c
 222         bspc node -f {next,prev}.local
 223
 224 # focus the next/previous desktop in the current monitor
 225 super + bracket{left,right}
 226         bspc desktop -f {prev,next}.local
 227
 228 # send to next/prev desktop
 229 super + shift + bracket{left,right}
 230         bspc node -d {prev,next} --follow
 231
 232 # focus the last node/desktop
 233 super + {grave,Tab}
 234         bspc {node,desktop} -f last
 235
 236 # focus the older or newer node in the focus history
 237 super + {o,i}
 238         bspc wm -h off; \
 239         bspc node {older,newer} -f; \
 240         bspc wm -h on
 241
 242 # focus or send to the given desktop
 243 super + {_,shift + }{1-9,0}
 244         bspc {desktop -f,node -d} '^{1-9,10}'
 245
 246 #
 247 # preselect
 248 #
 249
 250 # preselect the direction
 251 super + ctrl + {h,j,k,l}
 252         bspc node -p {west,south,north,east}
 253
 254 # preselect the ratio
 255 super + ctrl + {1-9}
 256         bspc node -o 0.{1-9}
 257
 258 # cancel the preselection for the focused node
 259 super + ctrl + space
 260         bspc node -p cancel
 261
 262 # cancel the preselection for the focused desktop
 263 super + ctrl + shift + space
 264         bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
 265
 266 #
 267 # move/resize
 268 #
 269
 270 # expand a window by moving one of its side outward
 271 super + alt + {h,j,k,l}
 272         bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
 273
 274 # contract a window by moving one of its side inward
 275 super + alt + shift + {h,j,k,l}
 276         bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
 277
 278 # move a floating window
 279 super + {Left,Down,Up,Right}
 280         bspc node -v {-20 0,0 20,0 -20,20 0}
 281
 282 #alt + bracket{left,right}
 283 #       xdotool key --clearmodifiers ctrl+Page_{Up,Down}
 284 #+end_src
 285
 286 ** compton
 287 :PROPERTIES:
 288 :header-args+: :tangle ~/.config/compton.conf
 289 :END:
 290
 291 #+begin_src conf :tangle no
 292 # Shadow
 293 shadow = false;                 # Enabled client-side shadows on windows.
 294 no-dock-shadow = true;          # Avoid drawing shadows on dock/panel windows.
 295 no-dnd-shadow = true;           # Don't draw shadows on DND windows.
 296 clear-shadow = true;            # Zero the part of the shadow's mask behind the
 297                                 # window. Fix some weirdness with ARGB windows.
 298 shadow-radius = 5;              # The blur radius for shadows. (default 12)
 299 shadow-offset-x = -5;           # The left offset for shadows. (default -15)
 300 shadow-offset-y = -5;           # The top offset for shadows. (default -15)
 301 # shadow-opacity = 0.7;         # The translucency for shadows. (default .75)
 302 # shadow-red = 0.0;             # Red color value of shadow. (0.0 - 1.0, defaults to 0)
 303 # shadow-green = 0.0;           # Green color value of shadow. (0.0 - 1.0, defaults to 0)
 304 # shadow-blue = 0.0;            # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
 305 shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ];    # Exclude conditions for shadows.
 306 # shadow-exclude = "n:e:Notification";
 307 #shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
 308 shadow-ignore-shaped = true;    # Avoid drawing shadow on all shaped windows
 309                                 # (see also: --detect-rounded-corners)
 310
 311 # Opacity
 312 menu-opacity = 1.0;                     # The opacity for menus. (default 1.0)
 313 #inactive-opacity = 0.9;                        # Default opacity of inactive windows. (0.0 - 1.0)
 314 # active-opacity = 0.8;                 # Default opacity for active windows. (0.0 - 1.0)
 315 frame-opacity = 1.0;                    # Opacity of window titlebars and borders. (0.1 - 1.0)
 316 # inactive-opacity-override = true;     # Let inactive opacity set by 'inactive-opacity' overrides
 317                                         # value of _NET_WM_OPACITY. Bad choice.
 318 alpha-step = 0.06;                      # XRender backend: Step size for alpha pictures. Increasing
 319                                         # it may result in less X resource usage,
 320                                         # Yet fading may look bad.
 321 #inactive-dim = 0.5;                    # Dim inactive windows. (0.0 - 1.0)
 322 #inactive-dim-fixed = true;             # Do not let dimness adjust based on window opacity.
 323 # blur-background = true;               # Blur background of transparent windows.
 324                                         # Bad performance with X Render backend.
 325                                         # GLX backend is preferred.
 326 # blur-background-frame = true;         # Blur background of opaque windows with transparent
 327                                         # frames as well.
 328 blur-background-fixed = true;           # Do not let blur radius adjust based on window opacity.
 329 blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
 330                                         # Exclude conditions for background blur.
 331
 332 # Fading
 333 fading = false;                 # Fade windows during opacity changes.
 334 fade-delta = 3;         # The time between steps in a fade in milliseconds. (default 10).
 335 fade-in-step = 0.03;            # Opacity change between steps while fading in. (default 0.028).
 336 fade-out-step = 0.03;           # Opacity change between steps while fading out. (default 0.03).
 337 # no-fading-openclose = true;   # Avoid fade windows in/out when opening/closing.
 338 fade-exclude = [ ];             # Exclude conditions for fading.
 339
 340 # Other
 341 backend = "glx"                 # Backend to use: "xrender" or "glx". GLX backend is typically
 342                                 # much faster but depends on a sane driver.
 343 mark-wmwin-focused = true;      # Try to detect WM windows and mark them as active.
 344 mark-ovredir-focused = true;    # Mark all non-WM but override-redirect windows active (e.g. menus).
 345 use-ewmh-active-win = true;     # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
 346                                 # instead of using FocusIn/Out events. Usually more reliable but
 347                                 # depends on a EWMH-compliant WM.
 348 detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
 349 detect-client-opacity = true;   # Detect _NET_WM_OPACITY on client windows, useful for window
 350                                 # managers not passing _NET_WM_OPACITY of client windows to frame
 351                                 # windows.
 352 refresh-rate = 0;               # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
 353 vsync = "drm";                  # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
 354                                 # See man page for more details.
 355 dbe = false;                    # Enable DBE painting mode. Rarely needed.
 356 paint-on-overlay = true;        # Painting on X Composite overlay window. Recommended.
 357 sw-opti = false;                # Limit compton to repaint at most once every 1 / refresh_rate.
 358                                 # Incompatible with certain VSync methods.
 359 unredir-if-possible = false;    # Unredirect all windows if a full-screen opaque window is
 360                                 # detected, to maximize performance for full-screen windows.
 361 focus-exclude = [ ];            # A list of conditions of windows that should always be considered
 362                                 # focused.
 363 detect-transient = true;        # Use WM_TRANSIENT_FOR to group windows, and consider windows in
 364                                 # the same group focused at the same time.
 365 detect-client-leader = true;    # Use WM_CLIENT_LEADER to group windows.
 366 invert-color-include = [ ];     # Conditions for windows to be painted with inverted color.
 367
 368 # GLX backend                   # GLX backend fine-tune options. See man page for more info.
 369 glx-no-stencil = true;          # Recommended.
 370 glx-copy-from-front = false;    # Useful with --glx-swap-method,
 371 # glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
 372 # glx-no-rebind-pixmap = true;  # Recommended if it works.
 373 glx-no-rebind-pixmap = true;    # Recommended if it works.
 374 #glx-swap-method = "4"; # See man page.
 375 glx-swap-method = "4";  # See man page.
 376
 377 # Window type settings
 378 wintypes:
 379 {
 380   tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
 381   menu = { shadow = false; };
 382   dropdown_menu = { shadow = false; };
 383   popup_menu =  { shadow = false; };
 384   utility =  { shadow = false; };
 385   # fade: Fade the particular type of windows.
 386   # shadow: Give those windows shadow
 387   # opacity: Default opacity for the type of windows.
 388   # focus: Whether to always consider windows of this type focused.
 389 };
 390 #+end_src
 391
 392 ** Dunst
 393 :PROPERTIES:
 394 :header-args+: :tangle ~/.config/dunst/dunstrc
 395 :END:
 396
 397 #+begin_src conf
 398 [global]
 399 #font = Ubuntu Mono 10.5
 400 font = Inconsolata 11
 401
 402 # Path to default icons.
 403 icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
 404
 405 icon_position = left
 406 # <b>bold</b>
 407 # <i>italic</i>
 408 # <s>strikethrough<s/>
 409 # <u>underline</u>
 410 markup = full
 411 # The format of the message. Possible variables are:
 412 #   %a  appname
 413 #   %s  summary
 414 #   %b  body
 415 #   %i  iconname (including its path)
 416 #   %I  iconname (without its path)
 417 #   %p  progress value if set ([  0%] to [100%]) or nothing
 418 # Markup is allowed
 419 format = "<b>%s</b>\n%b"
 420 # Sort messages by urgency
 421 sort = yes
 422 # Show how many messages are currently hidden (because of geometry)
 423 indicate_hiddenl= no
 424 # Alignment of message text.
 425 # Possible values are "left", "center" and "right"
 426 alignment = center
 427 # The frequency with wich text that is longer than the notification
 428 # window allows bounces back and forth.
 429 # This option conflicts with 'word_wrap'.
 430 # Set to 0 to disable
 431 bounce_freq = 3
 432 # show age of message if message is older than show_age_threshold seconds.
 433 # set to -1 to disable
 434 show_age_threshold = -1
 435 # split notifications into multiple lines if they don't fit into geometry
 436 word_wrap = yes
 437 # ignore newlines '\n' in notifications
 438 ignore_newline = no
 439 # The geometry of the message window.
 440 # geometry [{width}]x{height}][+/-{x}+/-{y}]
 441 # The height is measured in number of notifications everything else in pixels. If the width
 442 # is omitted but the height is given ("-geometry x2"), the message window
 443 # expands over the whole screen (dmenu-like). If width is 0,
 444 # the window expands to the longest message displayed.
 445 # A positive x is measured from the left, a negative from the
 446 # right side of the screen.  Y is measured from the top and down respectevly.
 447 # The width can be negative. In this case the actual width is the
 448 # screen width minus the width defined in within the geometry option.
 449 #geometry = "410x12-12+12"
 450 #geometry = "0x0-30-30"
 451 geometry = "260x12-30-30"
 452 # The transparency of the window. range: [0; 100]
 453 # This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
 454 transparency = 0
 455 # Don't remove messages, if the user is idle (no mouse or keyboard input)
 456 # for longer than idle_threshold seconds.
 457 # Set to 0 to disable.
 458 idle_threshold = 120
 459 # Which monitor should the notifications be displayed on.
 460 monitor = 0
 461 # Display notification on focused monitor. Possible modes are:
 462 # mouse: follow mouse pointer
 463 # keyboard: follow window with keyboard focus
 464 # none: don't follow anything
 465 #
 466 # "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
 467 # This should be the case for almost all modern windowmanagers.
 468 #
 469 # If this option is set to mouse or keyboard, the monitor option will be
 470 # ignored.
 471 follow = keyboard
 472 # should a notification popped up from history be sticky or
 473 # timeout as if it would normally do.
 474 sticky_history = yes
 475 # The height of a single line. If the height is smaller than the font height,
 476 # it will get raised to the font height.
 477 # This adds empty space above and under the text.
 478 line_height = 0
 479
 480 show_indicators = yes
 481
 482 # Draw a line of 'separatpr_height' pixel height between two notifications.
 483 # Set to 0 to disable
 484 separator_height = 3
 485 # padding between text and separator
 486 padding = 8
 487 # horizontal padding
 488 horizontal_padding = 8
 489 # Define a color for the separator.
 490 # possible values are:
 491 #  * auto: dunst tries to find a color fitting to the background
 492 #  * foreground: use the same color as the foreground
 493 #  * frame: use the same color as the frame.
 494 #  * anything else will be interpreted as a X color
 495 separator_color = foreground
 496 # print a notification on startup
 497 # This is mainly for error detection, since dbus (re-)starts dunst
 498 # automatically after a crash.
 499 startup_notification = false
 500 # dmenu path
 501 #dmenu = /usr/bin/dmenu -p dunst:
 502 dmenu = /usr/bin/rofi -dmenu -p dunst:
 503 # browser for opening urls in context menu
 504 browser = /usr/bin/firefox -new-tab
 505 [frame]
 506 width = 0
 507 color = "#377222"
 508 [shortcuts]
 509 # shortcuts are specified as [modifier+][modifier+]...key
 510 # available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
 511 # and 'mod4' (windows-key)
 512 # xev might be helpful to find names for keys
 513 # close notification
 514 close = ctrl+space
 515 # close all notifications
 516 close_all = ctrl+shift+space
 517 # redisplay last message(s)
 518 # On the US keyboard layout 'grave' is normally above TAB and left of '1'.
 519 history = ctrl+shift+h
 520 # context menu
 521 context = ctrl+shift+period
 522 [urgency_low]
 523 # IMPORTANT: colors have to be defined in quotation marks.
 524 # Otherwise the '#' and following  would be interpreted as a comment.
 525 background = "#1d2a30"
 526 foreground = "#71c2af"
 527 timeout = 3
 528 [urgency_normal]
 529 background = "#1d2a30"
 530 foreground = "#71c2af"
 531 timeout = 0
 532 [urgency_critical]
 533 background = "#1d2a30"
 534 foreground = "#ff9982"
 535 timeout = 0
 536
 537 # Every section that isn't one of the above is interpreted as a rules
 538 # to override settings for certain messages.
 539 # Messages can be matched by 'appname', 'summary', 'body' or 'icon'
 540 # and you can override the 'timeout', 'urgency', 'foreground', 'background'
 541 # and 'format'.
 542 # Shell-like globbing will get expanded.
 543 #
 544 # SCRIPTING
 545 # you can specify a script that gets run when the rule matches by setting
 546 # the 'script' option.
 547 # The script will be called as follows:
 548 # script appname summary body icon urgency
 549 # where urgency can be "LOW", "NORMAL" or "CRITICAL".
 550 #
 551 # NOTE: if you don't want a notification to be displayed, set the format to ""
 552 # NOTE: It might be helpful to run dunst -print in a terminal in order to find
 553 # fitting options for rules.
 554 #[espeak]
 555 #    summary = "*"
 556 #    script = dunst_espeak.sh
 557 #[script-test]
 558 #    summary = "*script*"
 559 #    script = dunst_test.sh
 560 #[ignore]
 561 ## This notification will not be displayed
 562 #    summary = "foobar"
 563 #    format = ""
 564 #[signed_on]
 565 #    appname = Pidgin
 566 #    summary = "*signed on*"
 567 #    urgency = low
 568 #
 569 #[signed_off]
 570 #    appname = Pidgin
 571 #    summary = *signed off*
 572 #    urgency = low
 573 #
 574 #[says]
 575 #    appname = Pidgin
 576 #    summary = *says*
 577 #    urgency = critical
 578 #
 579 #[twitter]
 580 #    appname = Pidgin
 581 #    summary = *twitter.com*
 582 #    urgency = normal
 583 #
 584 [xfpm-backlight]
 585     summary = *Brightness*
 586     urgency = low
 587 #+end_src
 588
 589 ** Fontconfig
 590 :PROPERTIES:
 591 :header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
 592 :END:
 593
 594 #+begin_src xml
 595 <?xml version="1.0"?>
 596 <!DOCTYPE fontconfig SYSTEM "fonts.dtd">
 597 <fontconfig>
 598  <match target="font">
 599   <edit mode="assign" name="rgba">
 600    <const>rgb</const>
 601   </edit>
 602  </match>
 603  <match target="font">
 604   <edit mode="assign" name="hinting">
 605    <bool>true</bool>
 606   </edit>
 607  </match>
 608  <match target="font">
 609   <edit mode="assign" name="hintstyle">
 610    <const>hintslight</const>
 611   </edit>
 612  </match>
 613  <match target="font">
 614   <edit mode="assign" name="antialias">
 615    <bool>true</bool>
 616   </edit>
 617  </match>
 618  <match target="font">
 619   <edit mode="assign" name="lcdfilter">
 620    <const>lcddefault</const>
 621   </edit>
 622  </match>
 623  <dir>~/.fonts</dir>
 624
 625  <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
 626  <alias binding="same">
 627   <family>Helvetica</family>
 628   <accept>
 629    <family>Liberation Sans</family>
 630   </accept>
 631 </alias>
 632 </fontconfig>
 633 #+end_src
 634
 635 ** Git
 636
 637 *** gitconfig
 638 :PROPERTIES:
 639 :header-args+: :tangle ~/.gitconfig
 640 :END:
 641
 642 **** user
 643 #+begin_src conf
 644 [user]
 645     name = Amin Bandali
 646     email = mab@gnu.org
 647     signingkey = 4E05246AB0BF7FFB
 648 #+end_src
 649
 650 **** signing
 651 #+begin_src conf
 652 [commit]
 653     gpgsign = true
 654 # [format]
 655 #     signoff = true
 656 #+end_src
 657
 658 **** core
 659 #+begin_src conf
 660 [core]
 661     autocrlf = input  # CRLF -> LF on commit
 662     editor = emacsclient -t
 663     excludesfile = ~/.gitignore_global
 664     pager = "less"
 665 #+end_src
 666
 667 **** gpg
 668 #+begin_src conf
 669 [gpg]
 670     program = gpg2
 671 #+end_src
 672
 673 **** alias
 674 #+begin_src conf
 675 [alias]
 676     git = !exec git  # handle nested git calls, e.g. git git status
 677     aliases = config --get-regexp '^alias\\.'
 678     a = add
 679     s = status
 680     sl = status --long
 681     c = checkout
 682     cb = checkout -b
 683     b = branch
 684     r = rebase
 685     p = pull
 686     pr = pull --rebase
 687     ps = push
 688     psf = push --force
 689     nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f"
 690     nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f"
 691 #+end_src
 692
 693 **** color
 694 #+begin_src conf
 695 [color]
 696     ui = auto
 697 [color "status"]
 698     added = green bold
 699     changed = red bold
 700     untracked = red bold
 701 [color "branch"]
 702     current = green bold
 703     remote = magenta bold
 704 [color "diff"]
 705     new = green bold
 706     old = red bold
 707 #+end_src
 708
 709 **** status
 710 #+begin_src conf
 711 [status]
 712     # showUntrackedFiles = all
 713     short=true
 714     branch=true
 715 #+end_src
 716
 717 **** github
 718 #+begin_src conf
 719 [github]
 720         user = aminb
 721 #+end_src
 722
 723 **** send-email
 724 #+begin_src conf
 725 [sendemail]
 726         smtpuser = aminb
 727         smtpserver = fencepost.gnu.org
 728         smtpserverport = 587
 729         smtpencryption = tls
 730         annotate = yes
 731 #+end_src
 732
 733 *** gitignore
 734 :PROPERTIES:
 735 :header-args+: :tangle ~/.gitignore_global
 736 :END:
 737
 738 #+begin_src conf
 739 *.orig
 740 *.py[co]
 741 *.sublime-workspace
 742 *~
 743 .DS_Store
 744 *.elc
 745 *-autoloads.el
 746 #+end_src
 747
 748 ** [[https://github.com/Leinnan/i3gs][i3gs]]
 749 :PROPERTIES:
 750 :header-args+: :tangle ~/.config/i3gs/config
 751 :END:
 752
 753 #+begin_src conf :comments none
 754 borders_width=0 0 2 0
 755 separator_width=10
 756
 757 #[mpd]
 758 #preset=MPD
 759 #title=<span weight='heavy' fgcolor='#7FDBFF'> </span>
 760 #borders_color=#7FDBFF
 761
 762 [ram]
 763 preset=RAM
 764 title=<span weight='heavy' fgcolor='#3D9970'> </span>
 765 borders_color=#3D9970
 766
 767 #[cpu]
 768 #preset=CPU
 769 #title=<span weight='heavy' fgcolor='#2ECC40'> </span>
 770 #borders_color=#2ECC40
 771
 772 #[hdd]
 773 #preset=HDD
 774 #title=<span weight='heavy' fgcolor='#01FF70'> </span>
 775 #borders_color=#01FF70
 776
 777 [volume]
 778 command=volume-info
 779 title=<span weight='heavy' fgcolor='#7FDBFF'></span>
 780 borders_color=#7FDBFF
 781
 782 [battery]
 783 preset=BAT
 784 command=battery-percentage-time
 785 title=<span weight='heavy' fgcolor='#39CCCC'> </span>
 786 borders_color=#39CCCC
 787
 788 [wifi]
 789 preset=WIFI
 790 title=<span weight='heavy' fgcolor='#01FF70'> </span>
 791 borders_color=#01FF70
 792
 793 [date]
 794 preset=DATE
 795 command=date '+%-I:%M, %a %b %d '
 796 title=<span weight='heavy' fgcolor='#FFDC00'> </span>
 797 borders_color=#FFDC00
 798 separator_width=0
 799 #+end_src
 800 ** Latexmk
 801 :PROPERTIES:
 802 :header-args+: :tangle ~/.latexmkrc
 803 :END:
 804
 805 #+begin_src conf
 806 $pdf_previewer = "start zathura %O %S";
 807 $clean_ext = "aux out";
 808
 809 # $pdf_update_method = 4;
 810 # $pdf_update_command = "zathura %O %S";
 811
 812 # Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
 813 # by Ctrl+click in the PDF.
 814 # Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
 815 # editor.
 816 # $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
 817 #+end_src
 818
 819 ** libinput
 820
 821 Improve XPS 15 9560's touchpad experience.
 822
 823 # begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
 824 #+begin_src conf :tangle no
 825 Section "InputClass"
 826     Identifier "libinput touchpad catchall"
 827     Driver "libinput"
 828     MatchIsTouchpad "on"
 829     Option "ClickMethod" "clickfinger"
 830     Option "NaturalScrolling" "true"
 831     Option "Tapping" "on"
 832     Option "TappingButtonMap" "lrm"
 833 EndSection
 834 #+end_src
 835
 836 ** getmail
 837
 838 *** getmailrc
 839 :PROPERTIES:
 840 :header-args+: :tangle ~/.getmail/getmailrc
 841 :END:
 842
 843 #+begin_src conf
 844 [retriever]
 845 type = SimplePOP3SSLRetriever
 846 server = fencepost.gnu.org
 847 username = aminb
 848 password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
 849 port = 995
 850 use_apop = True
 851
 852 [destination]
 853 type = Maildir
 854 path = ~/mail/gnu/Inbox/
 855
 856 [options]
 857 delete = True
 858 #+end_src
 859
 860 *** getmail.service
 861 :PROPERTIES:
 862 :header-args+: :tangle ~/.config/systemd/user/getmail.service
 863 :END:
 864
 865 #+begin_src conf :tangle no
 866 [Unit]
 867 Description=getmail service
 868
 869 [Service]
 870 Type=oneshot
 871 ExecStart=/usr/bin/getmail
 872 StandardOutput=syslog
 873 StandardError=syslog
 874 #+end_src
 875
 876 *** getmail.timer
 877 :PROPERTIES:
 878 :header-args+: :tangle ~/.config/systemd/user/getmail.timer
 879 :END:
 880
 881 #+begin_src conf :tangle no
 882 [Unit]
 883 Description=getmail timer
 884
 885 [Timer]
 886 OnCalendar=*:0/30
 887 Persistent=true
 888 Unit=getmail.service
 889
 890 [Install]
 891 WantedBy=timers.target
 892 #+end_src
 893
 894 ** GnuPG
 895 :PROPERTIES:
 896 :header-args+: :tangle ~/.gnupg/gpg-agent.conf
 897 :END:
 898
 899 #+begin_src conf
 900 default-cache-ttl 43200
 901 max-cache-ttl 43200
 902
 903 default-cache-ttl-ssh 10800
 904 max-cache-ttl-ssh 10800
 905
 906 # pinentry-program /usr/bin/pinentry-qt
 907 #+end_src
 908
 909 ** GTK
 910
 911 *** gtk-2.0
 912 :PROPERTIES:
 913 :header-args+: :tangle ~/.gtkrc-2.0
 914 :END:
 915
 916 #+begin_src conf
 917 gtk-theme-name="Greybird"
 918 gtk-icon-theme-name="Paper"
 919 gtk-font-name="Ubuntu 10"
 920 gtk-menu-images=0
 921 # gtk-key-theme-name = "Emacs"
 922 #+end_src
 923
 924 *** gtk-3.0
 925 :PROPERTIES:
 926 :header-args+: :tangle ~/.config/gtk-3.0/settings.ini
 927 :END:
 928
 929 #+begin_src conf :tangle no
 930 [Settings]
 931 gtk-icon-theme-name = Paper
 932 # gtk-theme-name = Adwaita
 933
 934 gtk-theme-name = Greybird
 935 # gtk-theme-name = Arc-Darker
 936 # gtk-theme-name = Numix-ArchBlue
 937
 938 gtk-font-name = Ubuntu 10
 939 # gtk-key-theme-name = Emacs
 940 #+end_src
 941
 942 ** isync
 943
 944 *** mbsyncrc
 945 :PROPERTIES:
 946 :header-args+: :tangle ~/.mbsyncrc
 947 :END:
 948
 949 #+begin_src conf
 950 # Global defaults
 951 CopyArrivalDate yes
 952
 953 ######
 954 IMAPAccount amin
 955 Host nix.aminb.org
 956 User amin@aminb.org
 957 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
 958 SSLType IMAPS
 959
 960 IMAPStore amin-remote
 961 Account amin
 962
 963 MaildirStore amin-local
 964 Path ~/mail/amin/
 965 Inbox ~/mail/amin/Inbox
 966 SubFolders Verbatim
 967
 968 Channel amin
 969 Master :amin-remote:
 970 Slave :amin-local:
 971 Patterns * !dovecot*
 972 Create Both
 973 SyncState *
 974
 975 ######
 976 IMAPAccount uwaterloo
 977 Host connect.uwaterloo.ca
 978 User abandali
 979 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
 980 SSLType IMAPS
 981
 982 IMAPStore uwaterloo-remote
 983 Account uwaterloo
 984
 985 MaildirStore uwaterloo-local
 986 Path ~/mail/uwaterloo/
 987 Inbox ~/mail/uwaterloo/Inbox
 988 SubFolders Verbatim
 989
 990 Channel uwaterloo
 991 Master :uwaterloo-remote:
 992 Slave :uwaterloo-local:
 993 Patterns * !dovecot*
 994 Create Both
 995 SyncState *
 996 #+end_src
 997
 998 *** mbsync.service
 999 :PROPERTIES:
1000 :header-args+: :tangle ~/.config/systemd/user/mbsync.service
1001 :END:
1002
1003 #+begin_src conf :tangle no
1004 [Unit]
1005 Description=mbsync service
1006
1007 [Service]
1008 Type=oneshot
1009 ExecStart=/usr/bin/mbsync -Va
1010 StandardOutput=syslog
1011 StandardError=syslog
1012 #+end_src
1013
1014 *** mbsync.timer
1015 :PROPERTIES:
1016 :header-args+: :tangle ~/.config/systemd/user/mbsync.timer
1017 :END:
1018
1019 #+begin_src conf :tangle no
1020 [Unit]
1021 Description=mbsync timer
1022
1023 [Timer]
1024 OnCalendar=*:0/15
1025 Persistent=true
1026 Unit=mbsync.service
1027
1028 [Install]
1029 WantedBy=timers.target
1030 #+end_src
1031
1032 ** mpd
1033 :PROPERTIES:
1034 :header-args+: :tangle ~/.config/mpd/mpd.conf
1035 :END:
1036
1037 #+begin_src conf
1038 # An example configuration file for MPD.
1039 # Read the user manual for documentation: http://www.musicpd.org/doc/user/
1040
1041
1042 # Files and directories #######################################################
1043 #
1044 # This setting controls the top directory which MPD will search to discover the
1045 # available audio files and add them to the daemon's online database. This
1046 # setting defaults to the XDG directory, otherwise the music directory will be
1047 # be disabled and audio files will only be accepted over ipc socket (using
1048 # file:// protocol) or streaming files over an accepted protocol.
1049 #
1050 music_directory         "~/usr/music"
1051 #
1052 # This setting sets the MPD internal playlist directory. The purpose of this
1053 # directory is storage for playlists created by MPD. The server will use
1054 # playlist files not created by the server but only if they are in the MPD
1055 # format. This setting defaults to playlist saving being disabled.
1056 #
1057 playlist_directory              "~/.mpd/playlists"
1058 #
1059 # This setting sets the location of the MPD database. This file is used to
1060 # load the database at server start up and store the database while the
1061 # server is not up. This setting defaults to disabled which will allow
1062 # MPD to accept files over ipc socket (using file:// protocol) or streaming
1063 # files over an accepted protocol.
1064 #
1065 db_file                 "~/.mpd/database"
1066 #
1067 # These settings are the locations for the daemon log files for the daemon.
1068 # These logs are great for troubleshooting, depending on your log_level
1069 # settings.
1070 #
1071 # The special value "syslog" makes MPD use the local syslog daemon. This
1072 # setting defaults to logging to syslog, otherwise logging is disabled.
1073 #
1074 log_file                        "~/.mpd/log"
1075 #
1076 # This setting sets the location of the file which stores the process ID
1077 # for use of mpd --kill and some init scripts. This setting is disabled by
1078 # default and the pid file will not be stored.
1079 #
1080 pid_file                        "~/.mpd/pid"
1081 #
1082 # This setting sets the location of the file which contains information about
1083 # most variables to get MPD back into the same general shape it was in before
1084 # it was brought down. This setting is disabled by default and the server
1085 # state will be reset on server start up.
1086 #
1087 state_file                      "~/.mpd/state"
1088 #
1089 # The location of the sticker database.  This is a database which
1090 # manages dynamic information attached to songs.
1091 #
1092 sticker_file                    "~/.mpd/sticker.sql"
1093 #
1094 ###############################################################################
1095
1096
1097 # General music daemon options ################################################
1098 #
1099 # This setting specifies the user that MPD will run as. MPD should never run as
1100 # root and you may use this setting to make MPD change its user ID after
1101 # initialization. This setting is disabled by default and MPD is run as the
1102 # current user.
1103 #
1104 #user                           "nobody"
1105 #
1106 # This setting specifies the group that MPD will run as. If not specified
1107 # primary group of user specified with "user" setting will be used (if set).
1108 # This is useful if MPD needs to be a member of group such as "audio" to
1109 # have permission to use sound card.
1110 #
1111 #group                          "nogroup"
1112 #
1113 # This setting sets the address for the daemon to listen on. Careful attention
1114 # should be paid if this is assigned to anything other then the default, any.
1115 # This setting can deny access to control of the daemon. Not effective if
1116 # systemd socket activiation is in use.
1117 #
1118 # For network
1119 #bind_to_address                "any"
1120 #
1121 # And for Unix Socket
1122 #bind_to_address                "~/.mpd/socket"
1123 #
1124 # This setting is the TCP port that is desired for the daemon to get assigned
1125 # to.
1126 #
1127 #port                           "6600"
1128 #
1129 # This setting controls the type of information which is logged. Available
1130 # setting arguments are "default", "secure" or "verbose". The "verbose" setting
1131 # argument is recommended for troubleshooting, though can quickly stretch
1132 # available resources on limited hardware storage.
1133 #
1134 #log_level                      "default"
1135 #
1136 # If you have a problem with your MP3s ending abruptly it is recommended that
1137 # you set this argument to "no" to attempt to fix the problem. If this solves
1138 # the problem, it is highly recommended to fix the MP3 files with vbrfix
1139 # (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
1140 # point gapless MP3 playback can be enabled.
1141 #
1142 #gapless_mp3_playback                   "yes"
1143 #
1144 # Setting "restore_paused" to "yes" puts MPD into pause mode instead
1145 # of starting playback after startup.
1146 #
1147 #restore_paused "no"
1148 #
1149 # This setting enables MPD to create playlists in a format usable by other
1150 # music players.
1151 #
1152 #save_absolute_paths_in_playlists       "no"
1153 #
1154 # This setting defines a list of tag types that will be extracted during the
1155 # audio file discovery process. The complete list of possible values can be
1156 # found in the user manual.
1157 #metadata_to_use        "artist,album,title,track,name,genre,date,composer,performer,disc"
1158 #
1159 # This setting enables automatic update of MPD's database when files in
1160 # music_directory are changed.
1161 #
1162 #auto_update    "yes"
1163 #
1164 # Limit the depth of the directories being watched, 0 means only watch
1165 # the music directory itself.  There is no limit by default.
1166 #
1167 #auto_update_depth "3"
1168 #
1169 ###############################################################################
1170
1171
1172 # Symbolic link behavior ######################################################
1173 #
1174 # If this setting is set to "yes", MPD will discover audio files by following
1175 # symbolic links outside of the configured music_directory.
1176 #
1177 #follow_outside_symlinks        "yes"
1178 #
1179 # If this setting is set to "yes", MPD will discover audio files by following
1180 # symbolic links inside of the configured music_directory.
1181 #
1182 #follow_inside_symlinks         "yes"
1183 #
1184 ###############################################################################
1185
1186
1187 # Zeroconf / Avahi Service Discovery ##########################################
1188 #
1189 # If this setting is set to "yes", service information will be published with
1190 # Zeroconf / Avahi.
1191 #
1192 #zeroconf_enabled               "yes"
1193 #
1194 # The argument to this setting will be the Zeroconf / Avahi unique name for
1195 # this MPD server on the network.
1196 #
1197 #zeroconf_name                  "Music Player"
1198 #
1199 ###############################################################################
1200
1201
1202 # Permissions #################################################################
1203 #
1204 # If this setting is set, MPD will require password authorization. The password
1205 # setting can be specified multiple times for different password profiles.
1206 #
1207 #password                        "password@read,add,control,admin"
1208 #
1209 # This setting specifies the permissions a user has who has not yet logged in.
1210 #
1211 #default_permissions             "read,add,control,admin"
1212 #
1213 ###############################################################################
1214
1215
1216 # Database #######################################################################
1217 #
1218
1219 #database {
1220 #       plugin "proxy"
1221 #       host "other.mpd.host"
1222 #       port "6600"
1223 #}
1224
1225 # Input #######################################################################
1226 #
1227
1228 input {
1229         plugin "curl"
1230 #       proxy "proxy.isp.com:8080"
1231 #       proxy_user "user"
1232 #       proxy_password "password"
1233 }
1234
1235 #
1236 ###############################################################################
1237
1238 # Audio Output ################################################################
1239 #
1240
1241 audio_output {
1242     type    "pulse"
1243     name    "pulse audio"
1244 }
1245
1246 audio_output {
1247     type    "fifo"
1248     name    "my_fifo"
1249     path    "/tmp/mpd.fifo"
1250     format  "44100:16:2"
1251 }
1252
1253 # MPD supports various audio output types, as well as playing through multiple
1254 # audio outputs at the same time, through multiple audio_output settings
1255 # blocks. Setting this block is optional, though the server will only attempt
1256 # autodetection for one sound card.
1257 #
1258 # An example of an ALSA output:
1259 #
1260 #audio_output {
1261 #       type            "alsa"
1262 #       name            "My ALSA Device"
1263 ##      device          "hw:0,0"        # optional
1264 ##      mixer_type      "hardware"      # optional
1265 ##      mixer_device    "default"       # optional
1266 ##      mixer_control   "PCM"           # optional
1267 ##      mixer_index     "0"             # optional
1268 #}
1269 #
1270 # An example of an OSS output:
1271 #
1272 #audio_output {
1273 #       type            "oss"
1274 #       name            "My OSS Device"
1275 ##      device          "/dev/dsp"      # optional
1276 ##      mixer_type      "hardware"      # optional
1277 ##      mixer_device    "/dev/mixer"    # optional
1278 ##      mixer_control   "PCM"           # optional
1279 #}
1280 #
1281 # An example of a shout output (for streaming to Icecast):
1282 #
1283 #audio_output {
1284 #       type            "shout"
1285 #       encoder         "vorbis"                # optional
1286 #       name            "My Shout Stream"
1287 #       host            "localhost"
1288 #       port            "8000"
1289 #       mount           "/mpd.ogg"
1290 #       password        "hackme"
1291 #       quality         "5.0"
1292 #       bitrate         "128"
1293 #       format          "44100:16:1"
1294 ##      protocol        "icecast2"              # optional
1295 ##      user            "source"                # optional
1296 ##      description     "My Stream Description" # optional
1297 ##      url             "http://example.com"    # optional
1298 ##      genre           "jazz"                  # optional
1299 ##      public          "no"                    # optional
1300 ##      timeout         "2"                     # optional
1301 ##      mixer_type      "software"              # optional
1302 #}
1303 #
1304 # An example of a recorder output:
1305 #
1306 #audio_output {
1307 #       type            "recorder"
1308 #       name            "My recorder"
1309 #       encoder         "vorbis"                # optional, vorbis or lame
1310 #       path            "/var/lib/mpd/recorder/mpd.ogg"
1311 ##      quality         "5.0"                   # do not define if bitrate is defined
1312 #       bitrate         "128"                   # do not define if quality is defined
1313 #       format          "44100:16:1"
1314 #}
1315 #
1316 # An example of a httpd output (built-in HTTP streaming server):
1317 #
1318 #audio_output {
1319 #       type            "httpd"
1320 #       name            "My HTTP Stream"
1321 #       encoder         "vorbis"                # optional, vorbis or lame
1322 #       port            "8000"
1323 #       bind_to_address "0.0.0.0"               # optional, IPv4 or IPv6
1324 ##      quality         "5.0"                   # do not define if bitrate is defined
1325 #       bitrate         "128"                   # do not define if quality is defined
1326 #       format          "44100:16:1"
1327 #       max_clients     "0"                     # optional 0=no limit
1328 #}
1329 #
1330 # An example of a pulseaudio output (streaming to a remote pulseaudio server)
1331 #
1332 #audio_output {
1333 #       type            "pulse"
1334 #       name            "My Pulse Output"
1335 ##      server          "remote_server"         # optional
1336 ##      sink            "remote_server_sink"    # optional
1337 #}
1338 #
1339 # An example of a winmm output (Windows multimedia API).
1340 #
1341 #audio_output {
1342 #       type            "winmm"
1343 #       name            "My WinMM output"
1344 ##      device          "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1345 #               or
1346 ##      device          "0"             # optional
1347 ##      mixer_type      "hardware"      # optional
1348 #}
1349 #
1350 # An example of an openal output.
1351 #
1352 #audio_output {
1353 #       type            "openal"
1354 #       name            "My OpenAL output"
1355 ##      device          "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1356 #}
1357 #
1358 # An example of an sndio output.
1359 #
1360 #audio_output {
1361 #       type            "sndio"
1362 #       name            "sndio output"
1363 #       mixer_type      "software"
1364 #}
1365 #
1366 # An example of an OS X output:
1367 #
1368 #audio_output {
1369 #       type            "osx"
1370 #       name            "My OS X Device"
1371 ##      device          "Built-in Output"       # optional
1372 ##      channel_map      "-1,-1,0,1"    # optional
1373 #}
1374 #
1375 ## Example "pipe" output:
1376 #
1377 #audio_output {
1378 #       type            "pipe"
1379 #       name            "my pipe"
1380 #       command         "aplay -f cd 2>/dev/null"
1381 ## Or if you're want to use AudioCompress
1382 #       command         "AudioCompress -m | aplay -f cd 2>/dev/null"
1383 ## Or to send raw PCM stream through PCM:
1384 #       command         "nc example.org 8765"
1385 #       format          "44100:16:2"
1386 #}
1387 #
1388 ## An example of a null output (for no audio output):
1389 #
1390 #audio_output {
1391 #       type            "null"
1392 #       name            "My Null Output"
1393 #       mixer_type      "none"                  # optional
1394 #}
1395 #
1396 ###############################################################################
1397
1398
1399 # Normalization automatic volume adjustments ##################################
1400 #
1401 # This setting specifies the type of ReplayGain to use. This setting can have
1402 # the argument "off", "album", "track" or "auto". "auto" is a special mode that
1403 # chooses between "track" and "album" depending on the current state of
1404 # random playback. If random playback is enabled then "track" mode is used.
1405 # See <http://www.replaygain.org> for more details about ReplayGain.
1406 # This setting is off by default.
1407 #
1408 #replaygain                     "album"
1409 #
1410 # This setting sets the pre-amp used for files that have ReplayGain tags. By
1411 # default this setting is disabled.
1412 #
1413 #replaygain_preamp              "0"
1414 #
1415 # This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1416 # By default this setting is disabled.
1417 #
1418 #replaygain_missing_preamp      "0"
1419 #
1420 # This setting enables or disables ReplayGain limiting.
1421 # MPD calculates actual amplification based on the ReplayGain tags
1422 # and replaygain_preamp / replaygain_missing_preamp setting.
1423 # If replaygain_limit is enabled MPD will never amplify audio signal
1424 # above its original level. If replaygain_limit is disabled such amplification
1425 # might occur. By default this setting is enabled.
1426 #
1427 #replaygain_limit               "yes"
1428 #
1429 # This setting enables on-the-fly normalization volume adjustment. This will
1430 # result in the volume of all playing audio to be adjusted so the output has
1431 # equal "loudness". This setting is disabled by default.
1432 #
1433 #volume_normalization           "no"
1434 #
1435 ###############################################################################
1436
1437 # Character Encoding ##########################################################
1438 #
1439 # If file or directory names do not display correctly for your locale then you
1440 # may need to modify this setting.
1441 #
1442 #filesystem_charset             "UTF-8"
1443 #
1444 ###############################################################################
1445 #+end_src
1446
1447 ** msmtp
1448 :PROPERTIES:
1449 :header-args+: :tangle ~/.msmtprc
1450 :END:
1451
1452 #+begin_src conf
1453 # Set default values for all following accounts.
1454 defaults
1455 port 587
1456 tls on
1457 auth on
1458 #tls_trust_file /etc/ssl/certs/ca-certificates.crt
1459 logfile ~/.msmtp.log
1460
1461 # aminb
1462 account aminb
1463 host nix.aminb.org
1464 # use `msmtp -a aminb --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1465 tls_fingerprint 98:C7:F0:02:7F:2B:D8:B6:D3:BF:E8:C1:D4:07:6B:B5:6C:B1:C7:5D:97:20:70:88:AB:9E:B5:09:5D:2C:DC:8E
1466 tls_starttls on
1467 from amin@aminb.org
1468 user amin@aminb.org
1469 passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
1470
1471 # gnu
1472 account gnu
1473 host fencepost.gnu.org
1474 # use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1475 tls_fingerprint 28:70:42:76:1C:EC:91:5F:D1:B3:27:A1:CD:3B:32:A4:8B:0B:DC:3A:CD:CA:F6:6F:E4:61:BA:69:D7:4D:0D:0B
1476 tls_starttls on
1477 from aminb@gnu.org
1478 user aminb
1479 passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
1480
1481 # gnu (new address)
1482 account gnu-mab : gnu
1483 from mab@gnu.org
1484
1485 # uwaterloo
1486 account uwaterloo
1487 host connect.uwaterloo.ca
1488 tls_starttls on
1489 from abandali@uwaterloo.ca
1490 user abandali
1491 passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
1492 tls_trust_file /etc/ssl/certs/ca-certificates.crt
1493
1494 # Set a default account
1495 account default : aminb
1496 #+end_src
1497
1498 ** ncmpcpp
1499
1500 *** config
1501 :PROPERTIES:
1502 :header-args+: :tangle ~/.ncmpcpp/config
1503 :END:
1504
1505 #+begin_src conf :tangle no
1506 ##############################################################
1507 ## This is the example configuration file. Copy it to       ##
1508 ## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
1509 ## and set up your preferences.                             ##
1510 ##############################################################
1511 #
1512 ##### directories ######
1513 ##
1514 ## Directory for storing ncmpcpp related files.
1515 ## Changing it is useful if you want to store
1516 ## everything somewhere else and provide command
1517 ## line setting for alternative location to config
1518 ## file which defines that while launching ncmpcpp.
1519 ##
1520 #
1521 ncmpcpp_directory = ~/.ncmpcpp
1522 #
1523 ##
1524 ## Directory for storing downloaded lyrics. It
1525 ## defaults to ~/.lyrics since other MPD clients
1526 ## (eg. ncmpc) also use that location.
1527 ##
1528 #
1529 #lyrics_directory = ~/.lyrics
1530 #
1531 ##### connection settings #####
1532 #
1533 #mpd_host = localhost
1534 #
1535 #mpd_port = 6600
1536 #
1537 #mpd_connection_timeout = 5
1538 #
1539 ## Needed for tag editor and file operations to work.
1540 ##
1541 mpd_music_dir = ~/usr/music
1542 #
1543 #mpd_crossfade_time = 5
1544 #
1545 ##### music visualizer #####
1546 ##
1547 ## Note: In order to make music visualizer work you'll
1548 ## need to use mpd fifo output, whose format parameter
1549 ## has to be set to 44100:16:1 for mono visualization
1550 ## or 44100:16:2 for stereo visualization. Example
1551 ## configuration (it has to be put into mpd.conf):
1552 ##
1553 ## audio_output {
1554 ##        type            "fifo"
1555 ##        name            "Visualizer feed"
1556 ##        path            "/tmp/mpd.fifo"
1557 ##        format          "44100:16:2"
1558 ## }
1559 ##
1560 #
1561 visualizer_fifo_path = /tmp/mpd.fifo
1562 #
1563 ##
1564 ## Note: Below parameter is needed for ncmpcpp
1565 ## to determine which output provides data for
1566 ## visualizer and thus allow syncing between
1567 ## visualization and sound as currently there
1568 ## are some problems with it.
1569 ##
1570 #
1571 visualizer_output_name = my fifo
1572 #
1573 ##
1574 ## If you set format to 44100:16:2, make it 'yes'.
1575 ##
1576 visualizer_in_stereo = yes
1577 #
1578 ##
1579 ## Multiply received samples by given value. Very
1580 ## useful for proper visualization of quiet music.
1581 ##
1582 #visualizer_sample_multiplier = 1
1583 #
1584 ##
1585 ## Note: Below parameter defines how often ncmpcpp
1586 ## has to "synchronize" visualizer and audio outputs.
1587 ## 30 seconds is optimal value, but if you experience
1588 ## synchronization problems, set it to lower value.
1589 ## Keep in mind that sane values start with >=10.
1590 ##
1591 #
1592 visualizer_sync_interval = 30
1593 #
1594 ##
1595 ## Note: To enable spectrum frequency visualization
1596 ## you need to compile ncmpcpp with fftw3 support.
1597 ##
1598 #
1599 ## Available values: spectrum, wave, wave_filled, ellipse.
1600 ##
1601 visualizer_type = spectrum
1602 #
1603 #visualizer_look = ●▮
1604 visualizer_look = "●•"
1605 #
1606 #visualizer_color = blue, cyan, green, yellow, magenta, red
1607 #
1608 ## Alternative subset of 256 colors for terminals that support it.
1609 ##
1610 #visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
1611 #
1612 ##### system encoding #####
1613 ##
1614 ## ncmpcpp should detect your charset encoding
1615 ## but if it failed to do so, you can specify
1616 ## charset encoding you are using here.
1617 ##
1618 ## Note: You can see whether your ncmpcpp build
1619 ## supports charset detection by checking output
1620 ## of `ncmpcpp --version`.
1621 ##
1622 ## Note: Since MPD uses UTF-8 by default, setting
1623 ## this option makes sense only if your encoding
1624 ## is different.
1625 ##
1626 #
1627 #system_encoding = ""
1628 #
1629 ##### delays #####
1630 #
1631 ## Time of inactivity (in seconds) after playlist
1632 ## highlighting will be disabled (0 = always on).
1633 ##
1634 #playlist_disable_highlight_delay = 5
1635 #
1636 ## Defines how long messages are supposed to be visible.
1637 ##
1638 #message_delay_time = 5
1639 #
1640 ##### song format #####
1641 ##
1642 ## For a song format you can use:
1643 ##
1644 ## %l - length
1645 ## %f - filename
1646 ## %D - directory
1647 ## %a - artist
1648 ## %A - album artist
1649 ## %t - title
1650 ## %b - album
1651 ## %y - date
1652 ## %n - track number (01/12 -> 01)
1653 ## %N - full track info (01/12 -> 01/12)
1654 ## %g - genre
1655 ## %c - composer
1656 ## %p - performer
1657 ## %d - disc
1658 ## %C - comment
1659 ## %P - priority
1660 ## $R - begin right alignment
1661 ##
1662 ## If you want to make sure that a part of the format is displayed
1663 ## only when certain tags are present, you can archieve it by
1664 ## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
1665 ## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
1666 ## It is also possible to define a list of alternatives by providing
1667 ## several groups and separating them with '|', e.g. '{%t}|{%f}'
1668 ## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
1669 ## present.
1670 ##
1671 ## Note: If you want to set limit on maximal length of a tag, just
1672 ## put the appropriate number between % and character that defines
1673 ## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
1674 ##
1675 ## In addition, formats support markers used for text attributes.
1676 ## They are followed by character '$'. After that you can put:
1677 ##
1678 ## - 0 - default window color (discards all other colors)
1679 ## - 1 - black
1680 ## - 2 - red
1681 ## - 3 - green
1682 ## - 4 - yellow
1683 ## - 5 - blue
1684 ## - 6 - magenta
1685 ## - 7 - cyan
1686 ## - 8 - white
1687 ## - 9 - end of current color
1688 ## - b - bold text
1689 ## - u - underline text
1690 ## - r - reverse colors
1691 ## - a - use alternative character set
1692 ##
1693 ## If you don't want to use a non-color attribute anymore, just put it
1694 ## again, but this time insert character '/' between '$' and attribute
1695 ## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
1696 ## or filename with reversed colors.
1697 ##
1698 ## If you want to use 256 colors and/or background colors in formats
1699 ## (the naming scheme is described below in section about color
1700 ## definitions), it can be done with the syntax $(COLOR), e.g. to set
1701 ## the artist tag to one of the non-standard colors and make it have
1702 ## yellow background, you need to write $(197_yellow)%a$(end). Note
1703 ## that for standard colors this is interchangable with attributes
1704 ## listed above.
1705 ##
1706 ## Note: colors can be nested.
1707 ##
1708 #
1709 #song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
1710 #
1711 #song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
1712 #
1713 #song_library_format = {%n - }{%t}|{%f}
1714 #
1715 #
1716 #alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
1717 #
1718 #alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
1719 #
1720 #now_playing_prefix = $b
1721 #
1722 #now_playing_suffix = $/b
1723 #
1724 #browser_playlist_prefix = "$2playlist$9 "
1725 #
1726 #selected_item_prefix = $6
1727 #
1728 #selected_item_suffix = $9
1729 #
1730 #modified_item_prefix = $3> $9
1731 #
1732 ##
1733 ## Note: attributes are not supported for the following variables.
1734 ##
1735 #song_window_title_format = {%a - }{%t}|{%f}
1736 ##
1737 ## Note: Below variables are used for sorting songs in browser.
1738 ## The sort mode determines how songs are sorted, and can be used
1739 ## in combination with a sort format to specify a custom sorting format.
1740 ## Available values for browser_sort_mode are "name", "mtime", "format"
1741 ## and "noop".
1742 ##
1743 #
1744 #browser_sort_mode = name
1745 #
1746 #browser_sort_format = {%a - }{%t}|{%f} {(%l)}
1747 #
1748 ##### columns settings #####
1749 ##
1750 ## syntax of song columns list format is "column column etc."
1751 ##
1752 ## - syntax for each column is:
1753 ##
1754 ## (width of the column)[color of the column]{displayed tag}
1755 ##
1756 ## Note: Width is by default in %, if you want a column to
1757 ## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
1758 ## will be the column that take 10% of screen (so the real width
1759 ## will depend on actual screen size), whereas (10f)[white]{a}
1760 ## will take 10 terminal cells, no matter how wide the screen is.
1761 ##
1762 ## - color is optional (if you want the default one,
1763 ##   leave the field empty).
1764 ##
1765 ## Note: You can give a column additional attributes by putting appropriate
1766 ## character after displayed tag character. Available attributes are:
1767 ##
1768 ## - r - column will be right aligned
1769 ## - E - if tag is empty, empty tag marker won't be displayed
1770 ##
1771 ## You can also:
1772 ##
1773 ## - give a column custom name by putting it after attributes,
1774 ##   separated with character ':', e.g. {lr:Length} gives you
1775 ##   right aligned column of lengths named "Length".
1776 ##
1777 ## - define sequence of tags, that have to be displayed in case
1778 ##   predecessor is empty in a way similar to the one in classic
1779 ##   song format, i.e. using '|' character, e.g. {a|c|p:Owner}
1780 ##   creates column named "Owner" that tries to display artist
1781 ##   tag and then composer and performer if previous ones are
1782 ##   not available.
1783 ##
1784 #
1785 #song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
1786 #
1787 ##### various settings #####
1788 #
1789 ##
1790 ## Note: Custom command that will be executed each
1791 ## time song changes. Useful for notifications etc.
1792 ##
1793 #execute_on_song_change = ""
1794 #
1795 #playlist_show_mpd_host = no
1796 #
1797 #playlist_show_remaining_time = no
1798 #
1799 #playlist_shorten_total_times = no
1800 #
1801 #playlist_separate_albums = no
1802 #
1803 ##
1804 ## Note: Possible display modes: classic, columns.
1805 ##
1806 #playlist_display_mode = columns
1807 #
1808 #browser_display_mode = classic
1809 #
1810 #search_engine_display_mode = classic
1811 #
1812 #playlist_editor_display_mode = classic
1813 #
1814 #discard_colors_if_item_is_selected = yes
1815 #
1816 #incremental_seeking = yes
1817 #
1818 #seek_time = 1
1819 #
1820 #volume_change_step = 2
1821 #
1822 #autocenter_mode = no
1823 #
1824 #centered_cursor = no
1825 #
1826 ##
1827 ## Note: You can specify third character which will
1828 ## be used to build 'empty' part of progressbar.
1829 ##
1830 #progressbar_look = =>
1831 progressbar_look = "─╼╶"
1832 #progressbar_look = "─⊙╶"
1833 #
1834 #progressbar_boldness = yes
1835 #
1836 ## Available values: database, playlist.
1837 ##
1838 #default_place_to_search_in = database
1839 #
1840 ## Available values: classic, alternative.
1841 ##
1842 #user_interface = classic
1843 #
1844 #data_fetching_delay = yes
1845 #
1846 ## Available values: artist, album_artist, date, genre, composer, performer.
1847 ##
1848 #media_library_primary_tag = artist
1849 #
1850 ## Available values: wrapped, normal.
1851 ##
1852 #default_find_mode = wrapped
1853 #
1854 #default_tag_editor_pattern = %n - %t
1855 #
1856 #header_visibility = yes
1857 #
1858 #statusbar_visibility = yes
1859 #
1860 #titles_visibility = yes
1861 #
1862 #header_text_scrolling = yes
1863 #
1864 #cyclic_scrolling = no
1865 #
1866 #lines_scrolled = 2
1867 #
1868 #follow_now_playing_lyrics = no
1869 #
1870 #fetch_lyrics_for_current_song_in_background = no
1871 #
1872 #store_lyrics_in_song_dir = no
1873 #
1874 #generate_win32_compatible_filenames = yes
1875 #
1876 #allow_for_physical_item_deletion = no
1877 #
1878 ##
1879 ## Note: If you set this variable, ncmpcpp will try to
1880 ## get info from last.fm in language you set and if it
1881 ## fails, it will fall back to english. Otherwise it will
1882 ## use english the first time.
1883 ##
1884 ## Note: Language has to be expressed as an ISO 639 alpha-2 code.
1885 ##
1886 #lastfm_preferred_language = en
1887 #
1888 #show_hidden_files_in_local_browser = no
1889 #
1890 ##
1891 ## How shall screen switcher work?
1892 ##
1893 ## - "previous" - switch between the current and previous screen.
1894 ## - "screen1,...,screenN" - switch between given sequence of screens.
1895 ##
1896 ## Screens available for use: help, playlist, browser, search_engine,
1897 ## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
1898 ##
1899 #screen_switcher_mode = playlist, browser
1900 #
1901 ##
1902 ## Note: You can define startup screen
1903 ## by choosing screen from the list above.
1904 ##
1905 #startup_screen = playlist
1906 #
1907 ##
1908 ## Note: You can define startup slave screen
1909 ## by choosing screen from the list above or
1910 ## an empty value for no slave screen.
1911 ##
1912 #startup_slave_screen = ""
1913 #
1914 #startup_slave_screen_focus = no
1915 #
1916 ##
1917 ## Default width of locked screen (in %).
1918 ## Acceptable values are from 20 to 80.
1919 ##
1920 #
1921 #locked_screen_width_part = 50
1922 #
1923 #ask_for_locked_screen_width_part = yes
1924 #
1925 #jump_to_now_playing_song_at_start = yes
1926 #
1927 #ask_before_clearing_playlists = yes
1928 #
1929 #clock_display_seconds = no
1930 #
1931 #display_volume_level = yes
1932 #
1933 #display_bitrate = no
1934 #
1935 #display_remaining_time = no
1936 #
1937 ## Available values: none, basic, extended, perl.
1938 ##
1939 #regular_expressions = perl
1940 #
1941 ##
1942 ## Note: If below is enabled, ncmpcpp will ignore leading
1943 ## "The" word while sorting items in browser, tags in
1944 ## media library, etc.
1945 ##
1946 #ignore_leading_the = no
1947 #
1948 #block_search_constraints_change_if_items_found = yes
1949 #
1950 #mouse_support = yes
1951 #
1952 #mouse_list_scroll_whole_page = yes
1953 #
1954 #empty_tag_marker = <empty>
1955 #
1956 #tags_separator = " | "
1957 #
1958 #tag_editor_extended_numeration = no
1959 #
1960 #media_library_sort_by_mtime = no
1961 #
1962 #enable_window_title = yes
1963 #
1964 ##
1965 ## Note: You can choose default search mode for search
1966 ## engine. Available modes are:
1967 ##
1968 ## - 1 - use mpd built-in searching (no regexes, pattern matching)
1969 ## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
1970 ##       but if your mpd is on a remote machine, downloading big database
1971 ##       to process it can take a while
1972 ## - 3 - match only exact values (this mode uses mpd function for searching
1973 ##       in database and local one for searching in current playlist)
1974 ##
1975 #
1976 #search_engine_default_search_mode = 1
1977 #
1978 #external_editor = nano
1979 #
1980 ## Note: set to yes if external editor is a console application.
1981 ##
1982 #use_console_editor = yes
1983 #
1984 ##### colors definitions #####
1985 ##
1986 ## It is possible to set a background color by setting a color
1987 ## value "<foreground>_<background>", e.g. red_black will set
1988 ## foregound color to red and background color to black.
1989 ##
1990 ## In addition, for terminals that support 256 colors it
1991 ## is possible to set one of them by using a number in range
1992 ## [1, 256] instead of color name, e.g. numerical value
1993 ## corresponding to red_black is 2_1. To find out if the
1994 ## terminal supports 256 colors, run ncmpcpp and check out
1995 ## the bottom of the help screen for list of available colors
1996 ## and their numerical values.
1997 ##
1998 ## Note: due to technical limitations of ncurses, if 256 colors
1999 ## are used, it is possible to either use only the colors with
2000 ## default background color, or all pairs from 1_1 up to 254_127,
2001 ## depending on the ncurses version used.
2002 ##
2003 #
2004 #colors_enabled = yes
2005 #
2006 #empty_tag_color = cyan
2007 #
2008 #header_window_color = default
2009 #
2010 #volume_color = default
2011 #
2012 #state_line_color = default
2013 #
2014 #state_flags_color = default
2015 #
2016 #main_window_color = yellow
2017 #
2018 #color1 = white
2019 #
2020 #color2 = green
2021 #
2022 #main_window_highlight_color = yellow
2023 #
2024 #progressbar_color = black
2025 #
2026 #progressbar_elapsed_color = green
2027 #
2028 #statusbar_color = default
2029 #
2030 #alternative_ui_separator_color = black
2031 #
2032 #active_column_color = red
2033 #
2034 #window_border_color = green
2035 #
2036 #active_window_border = red
2037 #
2038 #+end_src
2039
2040 *** bindings
2041 :PROPERTIES:
2042 :header-args+: :tangle ~/.ncmpcpp/bindings
2043 :END:
2044
2045 #+begin_src conf :tangle no
2046 def_key "j"
2047     scroll_down
2048 def_key "k"
2049     scroll_up
2050
2051 def_key "ctrl-u"
2052     page_up
2053 def_key "ctrl-d"
2054     page_down
2055
2056 def_key "h"
2057     previous_column
2058 def_key "l"
2059     next_column
2060
2061 def_key "."
2062     show_lyrics
2063
2064 def_key "n"
2065     next_found_item
2066 def_key "N"
2067     previous_found_item
2068
2069 def_key "J"
2070     move_sort_order_down
2071 def_key "K"
2072     move_sort_order_up
2073 #+end_src
2074
2075 ** notmuch
2076
2077 *** notmuch-config
2078 :PROPERTIES:
2079 :header-args+: :tangle ~/.notmuch-config
2080 :END:
2081
2082 #+begin_src conf
2083 # .notmuch-config - Configuration file for the notmuch mail system
2084 #
2085 # For more information about notmuch, see https://notmuchmail.org
2086
2087 # Database configuration
2088 #
2089 # The only value supported here is 'path' which should be the top-level
2090 # directory where your mail currently exists and to where mail will be
2091 # delivered in the future. Files should be individual email messages.
2092 # Notmuch will store its database within a sub-directory of the path
2093 # configured here named ".notmuch".
2094 #
2095 [database]
2096 path=/home/amin/mail
2097
2098 # User configuration
2099 #
2100 # Here is where you can let notmuch know how you would like to be
2101 # addressed. Valid settings are
2102 #
2103 #       name            Your full name.
2104 #       primary_email   Your primary email address.
2105 #       other_email     A list (separated by ';') of other email addresses
2106 #                       at which you receive email.
2107 #
2108 # Notmuch will use the various email addresses configured here when
2109 # formatting replies. It will avoid including your own addresses in the
2110 # recipient list of replies, and will set the From address based on the
2111 # address to which the original email was addressed.
2112 #
2113 [user]
2114 name=Amin Bandali
2115 primary_email=amin@aminb.org
2116 other_email=abandali@uwaterloo.ca;mab@gnu.org;aminb@gnu.org;
2117
2118 # Configuration for "notmuch new"
2119 #
2120 # The following options are supported here:
2121 #
2122 #       tags    A list (separated by ';') of the tags that will be
2123 #               added to all messages incorporated by "notmuch new".
2124 #
2125 #       ignore  A list (separated by ';') of file and directory names
2126 #               that will not be searched for messages by "notmuch new".
2127 #
2128 #               NOTE: *Every* file/directory that goes by one of those
2129 #               names will be ignored, independent of its depth/location
2130 #               in the mail store.
2131 #
2132 [new]
2133 tags=new;
2134 #tags=unread;inbox;
2135 ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
2136
2137 # Search configuration
2138 #
2139 # The following option is supported here:
2140 #
2141 #       exclude_tags
2142 #               A ;-separated list of tags that will be excluded from
2143 #               search results by default.  Using an excluded tag in a
2144 #               query will override that exclusion.
2145 #
2146 [search]
2147 exclude_tags=deleted;spam;
2148
2149 # Maildir compatibility configuration
2150 #
2151 # The following option is supported here:
2152 #
2153 #       synchronize_flags      Valid values are true and false.
2154 #
2155 #       If true, then the following maildir flags (in message filenames)
2156 #       will be synchronized with the corresponding notmuch tags:
2157 #
2158 #               Flag    Tag
2159 #               ----    -------
2160 #               D       draft
2161 #               F       flagged
2162 #               P       passed
2163 #               R       replied
2164 #               S       unread (added when 'S' flag is not present)
2165 #
2166 #       The "notmuch new" command will notice flag changes in filenames
2167 #       and update tags, while the "notmuch tag" and "notmuch restore"
2168 #       commands will notice tag changes and update flags in filenames
2169 #
2170 [maildir]
2171 synchronize_flags=true
2172
2173 # Cryptography related configuration
2174 #
2175 # The following option is supported here:
2176 #
2177 #       gpg_path
2178 #               binary name or full path to invoke gpg.
2179 #
2180 [crypto]
2181 gpg_path=gpg
2182 #+end_src
2183
2184 *** pre-new hook
2185 :PROPERTIES:
2186 :header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
2187 :END:
2188
2189 #+begin_src sh
2190 touch /tmp/gnusieve.log
2191 sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
2192              -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
2193 #+end_src
2194
2195 *** post-new hook
2196 :PROPERTIES:
2197 :header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
2198 :END:
2199
2200 #+begin_src sh
2201 # apply sent tag to messages sent by me
2202 notmuch tag -new +sent -- from:amin@aminb.org or from:mab@gnu.org or from:aminb@gnu.org or from:abandali@uwaterloo.ca
2203
2204 # initial tagging
2205 notmuch tag -latest                     -- tag:latest
2206 notmuch tag +inbox +unread +latest -new -- tag:new
2207
2208
2209 # apply tags to lists
2210
2211 # <aminb>
2212 notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
2213 notmuch tag -inbox +lists/haskell-weekly   -- folder:amin/lists/haskell-weekly
2214
2215 notmuch tag -inbox +pay -- folder:amin/pay
2216 notmuch tag -inbox +banking -- folder:amin/banking
2217 # </aminb>
2218
2219 # <uw>
2220 notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
2221 notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
2222
2223 notmuch tag -inbox +lists/clvsingle        -- folder:uwaterloo/lists/Clvsingle
2224 notmuch tag -inbox +lists/gsa              -- folder:uwaterloo/lists/GSA
2225 notmuch tag -inbox +lists/math-grad        -- folder:uwaterloo/lists/Math-grad
2226 notmuch tag -inbox +lists/scs-grads        -- folder:uwaterloo/lists/scs-grads
2227 notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
2228 # </uw>
2229
2230 # <gnu>
2231 notmuch tag -inbox +l/emacs-devel       -- folder:gnu/l/emacs-devel
2232 notmuch tag -inbox +l/emacs-orgmode     -- folder:gnu/l/emacs-orgmode
2233 notmuch tag -inbox +l/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
2234 notmuch tag -inbox +l/fencepost-users   -- folder:gnu/l/fencepost-users
2235 notmuch tag -inbox +l/guix-devel        -- folder:gnu/l/guix-devel
2236 notmuch tag -inbox +l/guile-devel       -- folder:gnu/l/guile-devel
2237 notmuch tag -inbox +l/help-gnu-emacs    -- folder:gnu/l/help-gnu-emacs
2238 notmuch tag -inbox +l/info-gnu-emacs    -- folder:gnu/l/info-gnu-emacs
2239 notmuch tag -inbox +l/www-commits       -- folder:gnu/l/www-commits
2240 notmuch tag -inbox +l/www-discuss       -- folder:gnu/l/www-discuss
2241 notmuch tag -inbox +webmasters          -- folder:gnu/webmasters
2242
2243 notmuch tag -inbox +l/deepspec     -- folder:gnu/l/deepspec
2244 notmuch tag -inbox +l/haskell-cafe -- folder:gnu/l/haskell-cafe
2245 notmuch tag -inbox +l/haskell-art  -- folder:gnu/l/haskell-art
2246 notmuch tag -inbox +l/notmuch      -- folder:gnu/l/notmuch
2247
2248 notmuch tag -inbox +l/~aminb/test-priv         -- folder:gnu/l/~aminb/test-priv
2249 notmuch tag -inbox +l/~sircmpwn/sr.ht-admins   -- folder:gnu/l/~sircmpwn/sr.ht-admins
2250 notmuch tag -inbox +l/~sircmpwn/sr.ht-announce -- folder:gnu/l/~sircmpwn/sr.ht-announce
2251 notmuch tag -inbox +l/~sircmpwn/sr.ht-dev      -- folder:gnu/l/~sircmpwn/sr.ht-dev
2252 notmuch tag -inbox +l/~sircmpwn/sr.ht-discuss  -- folder:gnu/l/~sircmpwn/sr.ht-discuss
2253 # </gnu>
2254
2255 notmuch tag -inbox -unread +archive/notmuch     -- path:archive/notmuch/**
2256 notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**
2257 #+end_src
2258
2259 *** notmuch.service
2260 :PROPERTIES:
2261 :header-args+: :tangle ~/.config/systemd/user/notmuch.service
2262 :END:
2263
2264 #+begin_src conf :tangle no
2265 [Unit]
2266 Description=notmuch service
2267
2268 [Service]
2269 Type=oneshot
2270 ExecStart=/usr/bin/notmuch new
2271 StandardOutput=syslog
2272 StandardError=syslog
2273 #+end_src
2274
2275 *** notmuch.timer
2276 :PROPERTIES:
2277 :header-args+: :tangle ~/.config/systemd/user/notmuch.timer
2278 :END:
2279
2280 #+begin_src conf :tangle no
2281 [Unit]
2282 Description=notmuch timer
2283
2284 [Timer]
2285 OnCalendar=*:0/5
2286 Persistent=true
2287 Unit=notmuch.service
2288
2289 [Install]
2290 WantedBy=timers.target
2291 #+end_src
2292
2293 ** offlineimap
2294
2295 *** offlineimaprc
2296 :PROPERTIES:
2297 :header-args+: :tangle ~/.offlineimaprc
2298 :END:
2299
2300 #+begin_src conf :tangle no
2301 [general]
2302 pythonfile = ~/.offlineimap.py
2303 accounts = Gmail, aminb
2304 maxsyncaccounts = 3
2305
2306 [Account Gmail]
2307 localrepository = GmailL
2308 remoterepository = GmailR
2309
2310 [Account aminb]
2311 localrepository = aminbL
2312 remoterepository = aminbR
2313
2314 [Repository GmailL]
2315 type = Maildir
2316 localfolders = ~/Maildir/Gmail
2317
2318 [Repository GmailR]
2319 type = IMAP
2320 remotehost = imap.gmail.com
2321 remoteusereval = mailuser("gmail")
2322 remotepasseval = mailpasswd("gmail")
2323 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2324 ssl = yes
2325 folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
2326 maxconnections = 1
2327 realdelete = no
2328
2329 [Repository aminbL]
2330 type = Maildir
2331 localfolders = ~/Maildir/aminb
2332
2333 [Repository aminbR]
2334 type = IMAP
2335 remotehost = mail.aminb.org
2336 remoteusereval = mailuser("aminb")
2337 remotepasseval = mailpasswd("aminb")
2338 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2339 ssl = yes
2340 folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
2341 maxconnections = 1
2342 realdelete = no
2343 #+end_src
2344
2345 *** offlineimap.py
2346 :PROPERTIES:
2347 :header-args+: :tangle ~/.offlineimap.py
2348 :END:
2349
2350 #+begin_src python :tangle no
2351 import os
2352 import subprocess
2353
2354 def mailpasswd(acct):
2355     acct = os.path.basename(acct)
2356     path = "/home/amin/.passwd/%s.gpg" % acct
2357     args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
2358     try:
2359         return subprocess.check_output(args).strip()
2360     except subprocess.CalledProcessError:
2361         return ""
2362
2363 def mailuser(acct):
2364     acct = os.path.basename(acct)
2365     path = "/home/amin/.passwd/%s" % acct
2366     args = ["cat", path]
2367     try:
2368         return subprocess.check_output(args).strip()
2369     except subprocess.CalledProcessError:
2370         return ""
2371
2372 def prime_gpg_agent():
2373   ret = False
2374   i = 1
2375   while not ret:
2376     ret = (mailpasswd("prime") == "prime")
2377     if i > 2:
2378       from offlineimap.ui import getglobalui
2379       sys.stderr.write("Error reading in passwords. Terminating.\n")
2380       getglobalui().terminate()
2381     i += 1
2382   return ret
2383
2384 prime_gpg_agent()
2385 #+end_src
2386
2387 ** pigeonhole
2388 *** gnu.sieve
2389 :PROPERTIES:
2390 :header-args+: :tangle ~/sieve/gnu.sieve :comments none
2391 :END:
2392
2393 #+begin_src conf
2394 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags", "include" ];
2395
2396 if anyof (
2397   address :is "from" "webmasters@gnu.org",
2398   address :is "from" "webmasters-comment@gnu.org") {
2399   fileinto :create "webmasters";
2400   stop;
2401 }
2402
2403 include :personal "lists";
2404 #+end_src
2405
2406 *** lists.sieve
2407 :PROPERTIES:
2408 :header-args+: :tangle ~/sieve/lists.sieve :comments none
2409 :END:
2410
2411 #+begin_src conf
2412 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags",
2413  "include" ];
2414
2415 if anyof (
2416     header :contains "list-id" "<emacs-devel.gnu.org>",
2417     header :contains "list-id" "<emacs-orgmode.gnu.org>",
2418     header :contains "list-id" "<emacsconf-discuss.gnu.org>",
2419     header :contains "list-id" "<fencepost-users.gnu.org>",
2420     header :contains "list-id" "<guix-devel.gnu.org>",
2421     header :contains "list-id" "<guile-devel.gnu.org>",
2422     header :contains "list-id" "<help-gnu-emacs.gnu.org>",
2423     header :contains "list-id" "<info-gnu-emacs.gnu.org>",
2424     header :contains "list-id" "<www-commits.gnu.org>",
2425     header :contains "list-id" "<www-discuss.gnu.org>",
2426     header :contains "list-id" "<deepspec.lists.cs.princeton.edu>",
2427     header :contains "list-id" "<haskell-cafe.haskell.org>",
2428     header :contains "list-id" "<haskell-art.we.lurk.org>",
2429     header :contains "list-id" "<notmuch.notmuchmail.org>") {
2430     if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
2431         set :lower "listname" "${1}";
2432         fileinto :create "l/${listname}";
2433     }
2434 }
2435
2436 if anyof (
2437     header :contains "list-id" "<~aminb/test-priv@lists.sr.ht>",
2438     header :contains "list-id" "<~sircmpwn/sr.ht-admins@lists.sr.ht>",
2439     header :contains "list-id" "<~sircmpwn/sr.ht-announce@lists.sr.ht>",
2440     header :contains "list-id" "<~sircmpwn/sr.ht-dev@lists.sr.ht>",
2441     header :contains "list-id" "<~sircmpwn/sr.ht-discuss@lists.sr.ht>") {
2442     if header :regex "list-id" "(~[a-z_0-9-]+)/([a-z_0-9.-]+)@" {
2443         set :lower "username" "${1}";
2444         set :lower "listname" "${2}";
2445         fileinto :create "l/${username}/${listname}";
2446     }
2447 }
2448 #+end_src
2449
2450 ** polybar
2451
2452 *** config
2453 :PROPERTIES:
2454 :header-args+: :tangle ~/.config/polybar/config
2455 :END:
2456
2457 #+begin_src conf :tangle no
2458 ;=====================================================
2459 ;
2460 ;   To learn more about how to configure Polybar
2461 ;   go to https://github.com/jaagr/polybar
2462 ;
2463 ;   The README contains alot of information
2464 ;
2465 ;=====================================================
2466
2467 [colors]
2468 ;background = ${xrdb:color0:#222}
2469 background = #222
2470 background-alt = #444
2471 ;foreground = ${xrdb:color7:#222}
2472 foreground = #eee
2473 foreground-alt = #888
2474 primary = #ffb52a
2475 secondary = #e60053
2476 alert = #bd2c40
2477
2478 [bar/main]
2479 ;monitor = ${env:MONITOR:HDMI-1}
2480 width = 100%
2481 height = 27
2482 ;offset-x = 1%
2483 ;offset-y = 1%
2484 radius = 3.0
2485 fixed-center = true
2486
2487 background = ${colors.background}
2488 foreground = ${colors.foreground}
2489
2490 line-size = 3
2491 line-color = #f00
2492
2493 border-size = 4
2494 border-color = #00000000
2495
2496 padding-left = 0
2497 padding-right = 2
2498
2499 module-margin-left = 2
2500 module-margin-right = 2
2501
2502 font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
2503 font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
2504 font-2 = Wuncon Siji:pixelsize=10;1
2505 font-3 = FontAwesome:pixelsize=10;1
2506
2507 modules-left = bspwm xwindow
2508 modules-center =
2509 modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
2510
2511 tray-position = right
2512 tray-padding = 1
2513 ;tray-transparent = true
2514 ;tray-background = #0063ff
2515 tray-maxsize = 18
2516
2517 wm-restack = bspwm
2518
2519 ;override-redirect = true
2520
2521 scroll-up = bspwm-desknext
2522 scroll-down = bspwm-deskprev
2523
2524 [module/xwindow]
2525 type = internal/xwindow
2526 label = %title:0:50:...%
2527
2528 [module/xkeyboard]
2529 type = internal/xkeyboard
2530 blacklist-0 = num lock
2531
2532 format-prefix = " "
2533 format-prefix-foreground = ${colors.foreground-alt}
2534 format-prefix-underline = ${colors.secondary}
2535
2536 label-layout = %layout%
2537 label-layout-underline = ${colors.secondary}
2538
2539 label-indicator-padding = 2
2540 label-indicator-margin = 1
2541 label-indicator-background = ${colors.secondary}
2542 label-indicator-underline = ${colors.secondary}
2543
2544 [module/filesystem]
2545 type = internal/fs
2546 interval = 25
2547
2548 mount-0 = /
2549
2550 label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
2551 label-unmounted = %mountpoint% not mounted
2552 label-unmounted-foreground = ${colors.foreground-alt}
2553
2554 [module/bspwm]
2555 type = internal/bspwm
2556
2557 label-focused = %index%
2558 label-focused-background = ${colors.background-alt}
2559 label-focused-underline= ${colors.primary}
2560 label-focused-padding = 2
2561
2562 label-occupied = %index%
2563 label-occupied-padding = 2
2564
2565 label-urgent = %index%!
2566 label-urgent-background = ${colors.alert}
2567 label-urgent-padding = 2
2568
2569 label-empty = %index%
2570 label-empty-foreground = ${colors.foreground-alt}
2571 label-empty-padding = 2
2572
2573 [module/i3]
2574 type = internal/i3
2575 format = <label-state> <label-mode>
2576 index-sort = true
2577 wrapping-scroll = false
2578
2579 ; Only show workspaces on the same output as the bar
2580 ;pin-workspaces = true
2581
2582 label-mode-padding = 2
2583 label-mode-foreground = #000
2584 label-mode-background = ${colors.primary}
2585
2586 ; focused = Active workspace on focused monitor
2587 label-focused = %index%
2588 label-focused-background = ${module/bspwm.label-focused-background}
2589 label-focused-underline = ${module/bspwm.label-focused-underline}
2590 label-focused-padding = ${module/bspwm.label-focused-padding}
2591
2592 ; unfocused = Inactive workspace on any monitor
2593 label-unfocused = %index%
2594 label-unfocused-padding = ${module/bspwm.label-occupied-padding}
2595
2596 ; visible = Active workspace on unfocused monitor
2597 label-visible = %index%
2598 label-visible-background = ${self.label-focused-background}
2599 label-visible-underline = ${self.label-focused-underline}
2600 label-visible-padding = ${self.label-focused-padding}
2601
2602 ; urgent = Workspace with urgency hint set
2603 label-urgent = %index%
2604 label-urgent-background = ${module/bspwm.label-urgent-background}
2605 label-urgent-padding = ${module/bspwm.label-urgent-padding}
2606
2607 [module/mpd]
2608 type = internal/mpd
2609 format-online = <label-song>  <icon-prev> <icon-stop> <toggle> <icon-next>
2610
2611 icon-prev = 
2612 icon-stop = 
2613 icon-play = 
2614 icon-pause = 
2615 icon-next = 
2616
2617 label-song-maxlen = 25
2618 label-song-ellipsis = true
2619
2620 [module/xbacklight]
2621 type = internal/xbacklight
2622
2623 format = <label> <bar>
2624 label = BL
2625
2626 bar-width = 10
2627 bar-indicator = |
2628 bar-indicator-foreground = #ff
2629 bar-indicator-font = 2
2630 bar-fill = ─
2631 bar-fill-font = 2
2632 bar-fill-foreground = #9f78e1
2633 bar-empty = ─
2634 bar-empty-font = 2
2635 bar-empty-foreground = ${colors.foreground-alt}
2636
2637 [module/backlight-acpi]
2638 inherit = module/xbacklight
2639 type = internal/backlight
2640 ;card = intel_backlight
2641 card = mba6x_backlight
2642
2643 [module/cpu]
2644 type = internal/cpu
2645 interval = 2
2646 format-prefix = " "
2647 format-prefix-foreground = ${colors.foreground-alt}
2648 format-underline = #f90000
2649 label = %percentage%%
2650
2651 [module/memory]
2652 type = internal/memory
2653 interval = 2
2654 format-prefix = " "
2655 format-prefix-foreground = ${colors.foreground-alt}
2656 format-underline = #4bffdc
2657 label = %percentage_used%%
2658
2659 [module/wlan]
2660 type = internal/network
2661 interface =
2662 interval = 3.0
2663
2664 format-connected = <ramp-signal> <label-connected>
2665 format-connected-underline = #9f78e1
2666 label-connected = %essid%
2667
2668 format-disconnected =
2669 ;format-disconnected = <label-disconnected>
2670 ;format-disconnected-underline = ${self.format-connected-underline}
2671 ;label-disconnected = %ifname% disconnected
2672 ;label-disconnected-foreground = ${colors.foreground-alt}
2673
2674 ramp-signal-0 = 
2675 ramp-signal-1 = 
2676 ramp-signal-2 = 
2677 ramp-signal-3 = 
2678 ramp-signal-4 = 
2679 ramp-signal-foreground = ${colors.foreground-alt}
2680
2681 [module/eth]
2682 type = internal/network
2683 interface =
2684 interval = 3.0
2685
2686 format-connected-underline = #55aa55
2687 format-connected-prefix = " "
2688 format-connected-prefix-foreground = ${colors.foreground-alt}
2689 label-connected = %local_ip%
2690
2691 format-disconnected =
2692 ;format-disconnected = <label-disconnected>
2693 ;format-disconnected-underline = ${self.format-connected-underline}
2694 ;label-disconnected = %ifname% disconnected
2695 ;label-disconnected-foreground = ${colors.foreground-alt}
2696
2697 [module/date]
2698 type = internal/date
2699 interval = 5
2700
2701 date =
2702 date-alt = " %Y-%m-%d"
2703
2704 time = %H:%M
2705 time-alt = %H:%M:%S
2706
2707 format-prefix = 
2708 format-prefix-foreground = ${colors.foreground-alt}
2709 format-underline = #0a6cf5
2710
2711 label = %date% %time%
2712
2713 [module/volume]
2714 type = internal/volume
2715
2716 format-volume = <label-volume> <bar-volume>
2717 label-volume = vol
2718 label-volume-foreground = ${root.foreground}
2719
2720 format-muted-prefix = " "
2721 format-muted-foreground = ${colors.foreground-alt}
2722 label-muted = mute
2723
2724 bar-volume-width = 10
2725 bar-volume-foreground-0 = #55aa55
2726 bar-volume-foreground-1 = #55aa55
2727 bar-volume-foreground-2 = #55aa55
2728 bar-volume-foreground-3 = #55aa55
2729 bar-volume-foreground-4 = #55aa55
2730 bar-volume-foreground-5 = #f5a70a
2731 bar-volume-foreground-6 = #ff5555
2732 bar-volume-gradient = false
2733 bar-volume-indicator = |
2734 bar-volume-indicator-font = 2
2735 bar-volume-fill = ─
2736 bar-volume-fill-font = 2
2737 bar-volume-empty = ─
2738 bar-volume-empty-font = 2
2739 bar-volume-empty-foreground = ${colors.foreground-alt}
2740
2741 [module/battery]
2742 type = internal/battery
2743 battery = BAT0
2744 adapter = ADP1
2745 full-at = 64
2746
2747 format-charging = <animation-charging> <label-charging>
2748 format-charging-underline = #ffb52a
2749
2750 format-discharging = <ramp-capacity> <label-discharging>
2751 format-discharging-underline = ${self.format-charging-underline}
2752
2753 format-full-prefix = " "
2754 format-full-prefix-foreground = ${colors.foreground-alt}
2755 format-full-underline = ${self.format-charging-underline}
2756
2757 ramp-capacity-0 = 
2758 ramp-capacity-1 = 
2759 ramp-capacity-2 = 
2760 ramp-capacity-foreground = ${colors.foreground-alt}
2761
2762 animation-charging-0 = 
2763 animation-charging-1 = 
2764 animation-charging-2 = 
2765 animation-charging-foreground = ${colors.foreground-alt}
2766 animation-charging-framerate = 750
2767
2768 [module/temperature]
2769 type = internal/temperature
2770 thermal-zone = 1
2771 warn-temperature = 66
2772
2773 format = <ramp> <label>
2774 format-underline = #f50a4d
2775 format-warn = <ramp> <label-warn>
2776 format-warn-underline = ${self.format-underline}
2777
2778 label = %temperature%
2779 label-warn = %temperature%
2780 label-warn-foreground = ${colors.secondary}
2781
2782 ramp-0 = 
2783 ramp-1 = 
2784 ramp-2 = 
2785 ramp-foreground = ${colors.foreground-alt}
2786
2787 [module/powermenu]
2788 type = custom/menu
2789
2790 format-spacing = 1
2791
2792 label-open = 
2793 label-open-foreground = ${colors.secondary}
2794 label-close =  cancel
2795 label-close-foreground = ${colors.secondary}
2796 label-separator = |
2797 label-separator-foreground = ${colors.foreground-alt}
2798
2799 menu-0-0 = reboot
2800 menu-0-0-exec = menu-open-1
2801 menu-0-1 = power off
2802 menu-0-1-exec = menu-open-2
2803
2804 menu-1-0 = cancel
2805 menu-1-0-exec = menu-open-0
2806 menu-1-1 = reboot
2807 menu-1-1-exec = sudo reboot
2808
2809 menu-2-0 = power off
2810 menu-2-0-exec = sudo poweroff
2811 menu-2-1 = cancel
2812 menu-2-1-exec = menu-open-0
2813
2814 [module/mail]
2815 type = custom/script
2816 interval = 60
2817 format = <label>
2818 format-prefix = " "
2819 format-prefix-foreground = ${colors.foreground-alt}
2820 format-underline = #0a6cf5
2821 exec = notmuch count tag:unread
2822
2823 [settings]
2824 screenchange-reload = true
2825 ;compositing-background = xor
2826 ;compositing-background = screen
2827 ;compositing-foreground = source
2828 ;compositing-border = over
2829
2830 [global/wm]
2831 margin-top = 0
2832 margin-bottom = 0
2833
2834 ; vim:ft=dosini
2835 #+end_src
2836
2837 *** polybar-launch
2838 :PROPERTIES:
2839 :header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
2840 :END:
2841
2842 #+begin_src sh :tangle no
2843 # Terminate already running bar instances
2844 killall -q polybar
2845
2846 # Wait until the processes have been shut down
2847 while pgrep -x polybar >/dev/null; do sleep 1; done
2848
2849 # Launch main bar
2850 polybar main &
2851
2852 echo "Bars launched..."
2853 #+end_src
2854
2855 ** PowerTOP
2856 :PROPERTIES:
2857 :header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
2858 :END:
2859
2860 #+begin_src conf
2861 [Unit]
2862 Description=Powertop tunings
2863
2864 [Service]
2865 ExecStart=/usr/bin/powertop --auto-tune
2866 RemainAfterExit=true
2867
2868 [Install]
2869 WantedBy=multi-user.target
2870 #+end_src
2871
2872 ** ranger
2873
2874 *** rc.conf
2875 :PROPERTIES:
2876 :header-args+: :tangle ~/.config/ranger/rc.conf
2877 :END:
2878
2879 #+begin_src conf :tangle no
2880 # ===================================================================
2881 # This file contains the default startup commands for ranger.
2882 # To change them, it is recommended to create the file
2883 # ~/.config/ranger/rc.conf and add your custom commands there.
2884 #
2885 # If you copy this whole file there, you may want to set the environment
2886 # variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
2887 #
2888 # The purpose of this file is mainly to define keybindings and settings.
2889 # For running more complex python code, please create a plugin in "plugins/" or
2890 # a command in "commands.py".
2891 #
2892 # Each line is a command that will be run before the user interface
2893 # is initialized.  As a result, you can not use commands which rely
2894 # on the UI such as :delete or :mark.
2895 # ===================================================================
2896
2897 # ===================================================================
2898 # == Options
2899 # ===================================================================
2900
2901 # How many columns are there, and what are their relative widths?
2902 set column_ratios 1,3,4
2903
2904 # Which files should be hidden? (regular expression)
2905 set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
2906
2907 # Show hidden files? You can toggle this by typing 'zh'
2908 set show_hidden false
2909
2910 # Ask for a confirmation when running the "delete" command?
2911 # Valid values are "always" (default), "never", "multiple"
2912 # With "multiple", ranger will ask only if you delete multiple files at once.
2913 set confirm_on_delete multiple
2914
2915 # Which script is used to generate file previews?
2916 # ranger ships with scope.sh, a script that calls external programs (see
2917 # README for dependencies) to preview images, archives, etc.
2918 set preview_script ~/.config/ranger/scope.sh
2919
2920 # Use the external preview script or display simple plain text previews?
2921 set use_preview_script true
2922
2923 # Open all images in this directory when running certain image viewers
2924 # like feh or sxiv?  You can still open selected files by marking them.
2925 set open_all_images true
2926
2927 # Be aware of version control systems and display information.
2928 set vcs_aware false
2929
2930 # State of the three backends git, hg, bzr. The possible states are
2931 # disabled, local (only show local info), enabled (show local and remote
2932 # information).
2933 set vcs_backend_git enabled
2934 set vcs_backend_hg disabled
2935 set vcs_backend_bzr disabled
2936
2937 # Preview images in full color with the external command "w3mimgpreview"?
2938 # This requires the console web browser "w3m" and a supported terminal.
2939 # It has been successfully tested with "xterm" and "urxvt" without tmux.
2940 set preview_images true
2941
2942 # Use a unicode "..." character to mark cut-off filenames?
2943 set unicode_ellipsis false
2944
2945 # Show dotfiles in the bookmark preview box?
2946 set show_hidden_bookmarks true
2947
2948 # Which colorscheme to use?  These colorschemes are available by default:
2949 # default, jungle, snow
2950 set colorscheme default
2951
2952 # Preview files on the rightmost column?
2953 # And collapse (shrink) the last column if there is nothing to preview?
2954 set preview_files true
2955 set preview_directories true
2956 set collapse_preview true
2957
2958 # Save the console history on exit?
2959 set save_console_history true
2960
2961 # Draw the status bar on top of the browser window (default: bottom)
2962 set status_bar_on_top false
2963
2964 # Draw a progress bar in the status bar which displays the average state of all
2965 # currently running tasks which support progress bars?
2966 set draw_progress_bar_in_status_bar true
2967
2968 # Draw borders around columns?
2969 set draw_borders true
2970
2971 # Display the directory name in tabs?
2972 set dirname_in_tabs false
2973
2974 # Enable the mouse support?
2975 set mouse_enabled true
2976
2977 # Display the file size in the main column or status bar?
2978 set display_size_in_main_column true
2979 set display_size_in_status_bar true
2980
2981 # Display files tags in all columns or only in main column?
2982 set display_tags_in_all_columns true
2983
2984 # Set a title for the window?
2985 set update_title false
2986
2987 # Set the title to "ranger" in the tmux program?
2988 set update_tmux_title false
2989
2990 # Shorten the title if it gets long?  The number defines how many
2991 # directories are displayed at once, 0 turns off this feature.
2992 set shorten_title 3
2993
2994 # Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
2995 set tilde_in_titlebar false
2996
2997 # How many directory-changes or console-commands should be kept in history?
2998 set max_history_size 20
2999 set max_console_history_size 50
3000
3001 # Try to keep so much space between the top/bottom border when scrolling:
3002 set scroll_offset 8
3003
3004 # Flush the input after each key hit?  (Noticable when ranger lags)
3005 set flushinput true
3006
3007 # Padding on the right when there's no preview?
3008 # This allows you to click into the space to run the file.
3009 set padding_right true
3010
3011 # Save bookmarks (used with mX and `X) instantly?
3012 # This helps to synchronize bookmarks between multiple ranger
3013 # instances but leads to *slight* performance loss.
3014 # When false, bookmarks are saved when ranger is exited.
3015 set autosave_bookmarks true
3016
3017 # You can display the "real" cumulative size of directories by using the
3018 # command :get_cumulative_size or typing "dc".  The size is expensive to
3019 # calculate and will not be updated automatically.  You can choose
3020 # to update it automatically though by turning on this option:
3021 set autoupdate_cumulative_size false
3022
3023 # Turning this on makes sense for screen readers:
3024 set show_cursor false
3025
3026 # One of: size, basename, mtime, type
3027 set sort natural
3028
3029 # Additional sorting options
3030 set sort_reverse false
3031 set sort_case_insensitive true
3032 set sort_directories_first true
3033
3034 # Enable this if key combinations with the Alt Key don't work for you.
3035 # (Especially on xterm)
3036 set xterm_alt_key false
3037
3038 # ===================================================================
3039 # == Local Options
3040 # ===================================================================
3041 # You can set local options that only affect a single directory.
3042
3043 # Examples:
3044 # setlocal path=~/downloads sort mtime
3045
3046 # ===================================================================
3047 # == Command Aliases in the Console
3048 # ===================================================================
3049
3050 alias e    edit
3051 alias q    quit
3052 alias q!   quitall
3053 alias qall quitall
3054 alias setl setlocal
3055
3056 alias filter     scout -prt
3057 alias find       scout -aet
3058 alias mark       scout -mr
3059 alias unmark     scout -Mr
3060 alias search     scout -rs
3061 alias search_inc scout -rts
3062 alias travel     scout -aefiklst
3063
3064 # ===================================================================
3065 # == Define keys for the browser
3066 # ===================================================================
3067
3068 # Basic
3069 map     Q quit!
3070 map     q quit
3071 copymap q ZZ ZQ
3072
3073 map R     reload_cwd
3074 map <C-r> reset
3075 map <C-l> redraw_window
3076 map <C-c> abort
3077 map <esc> change_mode normal
3078
3079 map i display_file
3080 map ? help
3081 map W display_log
3082 map w taskview_open
3083 map S shell $SHELL
3084
3085 map :  console
3086 map ;  console
3087 map !  console shell
3088 map @  console -p6 shell  %%s
3089 map #  console shell -p
3090 map s  console shell
3091 map r  chain draw_possible_programs; console open_with
3092 map f  console find
3093 map cd console cd
3094
3095 # Tagging / Marking
3096 map t       tag_toggle
3097 map ut      tag_remove
3098 map "<any>  tag_toggle tag=%any
3099 map <Space> mark_files toggle=True
3100 map v       mark_files all=True toggle=True
3101 map uv      mark_files all=True val=False
3102 map V       toggle_visual_mode
3103 map uV      toggle_visual_mode reverse=True
3104
3105 # For the nostalgics: Midnight Commander bindings
3106 map <F1> help
3107 map <F3> display_file
3108 map <F4> edit
3109 map <F5> copy
3110 map <F6> cut
3111 map <F7> console mkdir
3112 map <F8> console delete
3113 map <F10> exit
3114
3115 # In case you work on a keyboard with dvorak layout
3116 map <UP>       move up=1
3117 map <DOWN>     move down=1
3118 map <LEFT>     move left=1
3119 map <RIGHT>    move right=1
3120 map <HOME>     move to=0
3121 map <END>      move to=-1
3122 map <PAGEDOWN> move down=1   pages=True
3123 map <PAGEUP>   move up=1     pages=True
3124 map <CR>       move right=1
3125 map <DELETE>   console delete
3126 map <INSERT>   console touch
3127
3128 # VIM-like
3129 copymap <UP>       k
3130 copymap <DOWN>     j
3131 copymap <LEFT>     h
3132 copymap <RIGHT>    l
3133 copymap <HOME>     gg
3134 copymap <END>      G
3135 copymap <PAGEDOWN> <C-F>
3136 copymap <PAGEUP>   <C-B>
3137
3138 map J  move down=0.5  pages=True
3139 map K  move up=0.5    pages=True
3140 copymap J <C-D>
3141 copymap K <C-U>
3142
3143 # Jumping around
3144 map H     history_go -1
3145 map L     history_go 1
3146 map ]     move_parent 1
3147 map [     move_parent -1
3148 map }     traverse
3149
3150 map gh cd ~
3151 map ge cd /etc
3152 map gu cd /usr
3153 map gd cd /dev
3154 map gl cd -r .
3155 map gL cd -r %f
3156 map go cd /opt
3157 map gv cd /var
3158 map gm cd /media
3159 map gM cd /mnt
3160 map gs cd /srv
3161 map gr cd /
3162 map gR eval fm.cd(ranger.RANGERDIR)
3163 map g/ cd /
3164 map g? cd /usr/share/doc/ranger
3165
3166 # External Programs
3167 map E  edit
3168 map du shell -p du --max-depth=1 -h --apparent-size
3169 map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
3170 map yp shell -d echo -n %d/%f | xsel -i
3171 map yd shell -d echo -n %d    | xsel -i
3172 map yn shell -d echo -n %f    | xsel -i
3173
3174 # Filesystem Operations
3175 map =  chmod
3176
3177 map cw console rename
3178 map A  eval fm.open_console('rename ' + fm.thisfile.basename)
3179 map I  eval fm.open_console('rename ' + fm.thisfile.basename, position=7)
3180
3181 map pp paste
3182 map po paste overwrite=True
3183 map pl paste_symlink relative=False
3184 map pL paste_symlink relative=True
3185 map phl paste_hardlink
3186 map pht paste_hardlinked_subtree
3187
3188 map dd cut
3189 map ud uncut
3190 map da cut mode=add
3191 map dr cut mode=remove
3192
3193 map yy copy
3194 map uy uncut
3195 map ya copy mode=add
3196 map yr copy mode=remove
3197
3198 # Temporary workarounds
3199 map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
3200 map dG  eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
3201 map dj  eval fm.cut(dirarg=dict(down=1), narg=quantifier)
3202 map dk  eval fm.cut(dirarg=dict(up=1), narg=quantifier)
3203 map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
3204 map yG  eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
3205 map yj  eval fm.copy(dirarg=dict(down=1), narg=quantifier)
3206 map yk  eval fm.copy(dirarg=dict(up=1), narg=quantifier)
3207
3208 # Searching
3209 map /  console search
3210 map n  search_next
3211 map N  search_next forward=False
3212 map ct search_next order=tag
3213 map cs search_next order=size
3214 map ci search_next order=mimetype
3215 map cc search_next order=ctime
3216 map cm search_next order=mtime
3217 map ca search_next order=atime
3218
3219 # Tabs
3220 map <C-n>     tab_new ~
3221 map <C-w>     tab_close
3222 map <TAB>     tab_move 1
3223 map <S-TAB>   tab_move -1
3224 map <A-Right> tab_move 1
3225 map <A-Left>  tab_move -1
3226 map gt        tab_move 1
3227 map gT        tab_move -1
3228 map gn        tab_new ~
3229 map gc        tab_close
3230 map uq        tab_restore
3231 map <a-1>     tab_open 1
3232 map <a-2>     tab_open 2
3233 map <a-3>     tab_open 3
3234 map <a-4>     tab_open 4
3235 map <a-5>     tab_open 5
3236 map <a-6>     tab_open 6
3237 map <a-7>     tab_open 7
3238 map <a-8>     tab_open 8
3239 map <a-9>     tab_open 9
3240
3241 # Sorting
3242 map or toggle_option sort_reverse
3243 map os chain set sort=size;      set sort_reverse=False
3244 map ob chain set sort=basename;  set sort_reverse=False
3245 map on chain set sort=natural;   set sort_reverse=False
3246 map om chain set sort=mtime;     set sort_reverse=False
3247 map oc chain set sort=ctime;     set sort_reverse=False
3248 map oa chain set sort=atime;     set sort_reverse=False
3249 map ot chain set sort=type;      set sort_reverse=False
3250
3251 map oS chain set sort=size;      set sort_reverse=True
3252 map oB chain set sort=basename;  set sort_reverse=True
3253 map oN chain set sort=natural;   set sort_reverse=True
3254 map oM chain set sort=mtime;     set sort_reverse=True
3255 map oC chain set sort=ctime;     set sort_reverse=True
3256 map oA chain set sort=atime;     set sort_reverse=True
3257 map oT chain set sort=type;      set sort_reverse=True
3258
3259 map dc get_cumulative_size
3260
3261 # Settings
3262 map zc    toggle_option collapse_preview
3263 map zd    toggle_option sort_directories_first
3264 map zh    toggle_option show_hidden
3265 map <C-h> toggle_option show_hidden
3266 map zi    toggle_option flushinput
3267 map zm    toggle_option mouse_enabled
3268 map zp    toggle_option preview_files
3269 map zP    toggle_option preview_directories
3270 map zs    toggle_option sort_case_insensitive
3271 map zu    toggle_option autoupdate_cumulative_size
3272 map zv    toggle_option use_preview_script
3273 map zf    console filter
3274
3275 # Bookmarks
3276 map `<any>  enter_bookmark %any
3277 map '<any>  enter_bookmark %any
3278 map m<any>  set_bookmark %any
3279 map um<any> unset_bookmark %any
3280
3281 map m<bg>   draw_bookmarks
3282 copymap m<bg>  um<bg> `<bg> '<bg>
3283
3284 # Generate all the chmod bindings with some python help:
3285 eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
3286 eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
3287 eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
3288 eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
3289 eval for arg in "rwxXst": cmd("map +{0}  shell -d chmod u+{0} %s".format(arg))
3290
3291 eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
3292 eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
3293 eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
3294 eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
3295 eval for arg in "rwxXst": cmd("map -{0}  shell -d chmod u-{0} %s".format(arg))
3296
3297 # ===================================================================
3298 # == Define keys for the console
3299 # ===================================================================
3300 # Note: Unmapped keys are passed directly to the console.
3301
3302 # Basic
3303 cmap <tab>   eval fm.ui.console.tab()
3304 cmap <s-tab> eval fm.ui.console.tab(-1)
3305 cmap <ESC>   eval fm.ui.console.close()
3306 cmap <CR>    eval fm.ui.console.execute()
3307 cmap <C-l>   redraw_window
3308
3309 copycmap <ESC> <C-c>
3310 copycmap <CR>  <C-j>
3311
3312 # Move around
3313 cmap <up>    eval fm.ui.console.history_move(-1)
3314 cmap <down>  eval fm.ui.console.history_move(1)
3315 cmap <left>  eval fm.ui.console.move(left=1)
3316 cmap <right> eval fm.ui.console.move(right=1)
3317 cmap <home>  eval fm.ui.console.move(right=0, absolute=True)
3318 cmap <end>   eval fm.ui.console.move(right=-1, absolute=True)
3319
3320 # Line Editing
3321 cmap <backspace>  eval fm.ui.console.delete(-1)
3322 cmap <delete>     eval fm.ui.console.delete(0)
3323 cmap <C-w>        eval fm.ui.console.delete_word()
3324 cmap <C-k>        eval fm.ui.console.delete_rest(1)
3325 cmap <C-u>        eval fm.ui.console.delete_rest(-1)
3326 cmap <C-y>        eval fm.ui.console.paste()
3327
3328 # And of course the emacs way
3329 copycmap <up>        <C-p>
3330 copycmap <down>      <C-n>
3331 copycmap <left>      <C-b>
3332 copycmap <right>     <C-f>
3333 copycmap <home>      <C-a>
3334 copycmap <end>       <C-e>
3335 copycmap <delete>    <C-d>
3336 copycmap <backspace> <C-h>
3337
3338 # Note: There are multiple ways to express backspaces.  <backspace> (code 263)
3339 # and <backspace2> (code 127).  To be sure, use both.
3340 copycmap <backspace> <backspace2>
3341
3342 # This special expression allows typing in numerals:
3343 cmap <allow_quantifiers> false
3344
3345 # ===================================================================
3346 # == Pager Keybindings
3347 # ===================================================================
3348
3349 # Movement
3350 pmap  <down>      pager_move  down=1
3351 pmap  <up>        pager_move  up=1
3352 pmap  <left>      pager_move  left=4
3353 pmap  <right>     pager_move  right=4
3354 pmap  <home>      pager_move  to=0
3355 pmap  <end>       pager_move  to=-1
3356 pmap  <pagedown>  pager_move  down=1.0  pages=True
3357 pmap  <pageup>    pager_move  up=1.0    pages=True
3358 pmap  <C-d>       pager_move  down=0.5  pages=True
3359 pmap  <C-u>       pager_move  up=0.5    pages=True
3360
3361 copypmap <UP>       k  <C-p>
3362 copypmap <DOWN>     j  <C-n> <CR>
3363 copypmap <LEFT>     h
3364 copypmap <RIGHT>    l
3365 copypmap <HOME>     g
3366 copypmap <END>      G
3367 copypmap <C-d>      d
3368 copypmap <C-u>      u
3369 copypmap <PAGEDOWN> n  f  <C-F>  <Space>
3370 copypmap <PAGEUP>   p  b  <C-B>
3371
3372 # Basic
3373 pmap     <ESC> pager_close
3374 copypmap <ESC> q Q i <F3>
3375 pmap E      edit_file
3376
3377 # ===================================================================
3378 # == Taskview Keybindings
3379 # ===================================================================
3380
3381 # Movement
3382 tmap <up>        taskview_move up=1
3383 tmap <down>      taskview_move down=1
3384 tmap <home>      taskview_move to=0
3385 tmap <end>       taskview_move to=-1
3386 tmap <pagedown>  taskview_move down=1.0  pages=True
3387 tmap <pageup>    taskview_move up=1.0    pages=True
3388 tmap <C-d>       taskview_move down=0.5  pages=True
3389 tmap <C-u>       taskview_move up=0.5    pages=True
3390
3391 copytmap <UP>       k  <C-p>
3392 copytmap <DOWN>     j  <C-n> <CR>
3393 copytmap <HOME>     g
3394 copytmap <END>      G
3395 copytmap <C-u>      u
3396 copytmap <PAGEDOWN> n  f  <C-F>  <Space>
3397 copytmap <PAGEUP>   p  b  <C-B>
3398
3399 # Changing priority and deleting tasks
3400 tmap J          eval -q fm.ui.taskview.task_move(-1)
3401 tmap K          eval -q fm.ui.taskview.task_move(0)
3402 tmap dd         eval -q fm.ui.taskview.task_remove()
3403 tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
3404 tmap <pageup>   eval -q fm.ui.taskview.task_move(0)
3405 tmap <delete>   eval -q fm.ui.taskview.task_remove()
3406
3407 # Basic
3408 tmap <ESC> taskview_close
3409 copytmap <ESC> q Q w <C-c>
3410 #+end_src
3411
3412 *** scope.sh
3413 :PROPERTIES:
3414 :header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
3415 :END:
3416
3417 #+begin_src sh :tangle no
3418 # ranger supports enhanced previews.  If the option "use_preview_script"
3419 # is set to True and this file exists, this script will be called and its
3420 # output is displayed in ranger.  ANSI color codes are supported.
3421
3422 # NOTES: This script is considered a configuration file.  If you upgrade
3423 # ranger, it will be left untouched. (You must update it yourself.)
3424 # Also, ranger disables STDIN here, so interactive scripts won't work properly
3425
3426 # Meanings of exit codes:
3427 # code | meaning    | action of ranger
3428 # -----+------------+-------------------------------------------
3429 # 0    | success    | success. display stdout as preview
3430 # 1    | no preview | failure. display no preview at all
3431 # 2    | plain text | display the plain content of the file
3432 # 3    | fix width  | success. Don't reload when width changes
3433 # 4    | fix height | success. Don't reload when height changes
3434 # 5    | fix both   | success. Don't ever reload
3435
3436 # Meaningful aliases for arguments:
3437 path="$1"    # Full path of the selected file
3438 width="$2"   # Width of the preview pane (number of fitting characters)
3439 height="$3"  # Height of the preview pane (number of fitting characters)
3440
3441 maxln=200    # Stop after $maxln lines.  Can be used like ls | head -n $maxln
3442
3443 # Find out something about the file:
3444 mimetype=$(file --mime-type -Lb "$path")
3445 extension=${path##*.}
3446
3447 # Functions:
3448 # runs a command and saves its output into $output.  Useful if you need
3449 # the return value AND want to use the output in a pipe
3450 try() { output=$(eval '"$@"'); }
3451
3452 # writes the output of the previouosly used "try" command
3453 dump() { echo "$output"; }
3454
3455 # a common post-processing function used after most commands
3456 trim() { head -n "$maxln"; }
3457
3458 # wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
3459 highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }
3460
3461 case "$extension" in
3462     # Archive extensions:
3463     7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
3464     rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
3465         try als "$path" && { dump | trim; exit 0; }
3466         try acat "$path" && { dump | trim; exit 3; }
3467         try bsdtar -lf "$path" && { dump | trim; exit 0; }
3468         exit 1;;
3469     rar)
3470         try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
3471     # PDF documents:
3472     pdf)
3473         try pdftotext -l 10 -nopgbrk -q "$path" - && \
3474             { dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
3475     # BitTorrent Files
3476     torrent)
3477         try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
3478     # HTML Pages:
3479     htm|html|xhtml)
3480         try w3m    -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3481         try lynx   -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3482         try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3483         ;; # fall back to highlight/cat if the text browsers fail
3484 esac
3485
3486 case "$mimetype" in
3487     # Syntax highlight for text files:
3488     text/* | */xml)
3489         try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
3490     # Ascii-previews of images:
3491     image/*)
3492         img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
3493     # Display information about media files:
3494     video/* | audio/*)
3495         exiftool "$path" && exit 5
3496         # Use sed to remove spaces so the output fits into the narrow window
3497         try mediainfo "$path" && { dump | trim | sed 's/  \+:/: /;';  exit 5; } || exit 1;;
3498 esac
3499
3500 exit 1
3501 #+end_src
3502
3503 ** redshift
3504 :PROPERTIES:
3505 :header-args+: :tangle ~/.config/redshift.conf :comments none
3506 :END:
3507
3508 #+begin_src conf
3509 ; Global settings for redshift
3510 [redshift]
3511 ; Set the day and night screen temperatures (Neutral is 6500K)
3512 ;temp-day=5700
3513 ;temp-night=3500
3514
3515 ;temp-day=6500
3516 temp-day=6200
3517 ;temp-night=4800
3518 ;temp-night=5000
3519 ;temp-night=4500
3520 temp-night=4000
3521
3522 ; Enable/Disable a smooth transition between day and night
3523 ; 0 will cause a direct change from day to night screen temperature.
3524 ; 1 will gradually increase or decrease the screen temperature.
3525 transition=1
3526
3527 ; Set the screen brightness. Default is 1.0.
3528 ;brightness=0.9
3529 ; It is also possible to use different settings for day and night
3530 ; since version 1.8.
3531 ;brightness-day=0.7
3532 ;brightness-night=0.4
3533 ; Set the screen gamma (for all colors, or each color channel
3534 ; individually)
3535 ;gamma=0.8
3536 ;gamma=1.0
3537 ;gamma=0.8:0.7:0.8
3538 ; This can also be set individually for day and night since
3539 ; version 1.10.
3540 ;gamma-day=0.8:0.7:0.8
3541 ;gamma-night=0.6
3542
3543 ; Set the location-provider: 'geoclue2' or 'manual'
3544 ; type 'redshift -l list' to see possible values.
3545 ; The location provider settings are in a different section.
3546 ;location-provider=manual
3547 location-provider=geoclue2
3548
3549 ; Set the adjustment-method: 'randr', 'vidmode'
3550 ; type 'redshift -m list' to see all possible values.
3551 ; 'randr' is the preferred method, 'vidmode' is an older API.
3552 ; but works in some cases when 'randr' does not.
3553 ; The adjustment method settings are in a different section.
3554 adjustment-method=randr
3555
3556 ; Configuration of the location-provider:
3557 ; type 'redshift -l PROVIDER:help' to see the settings.
3558 ; ex: 'redshift -l manual:help'
3559 ; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
3560 ; are negative numbers.
3561 ;[manual]
3562 ;lat=48.1
3563 ;lon=11.6
3564
3565 ; Configuration of the adjustment-method
3566 ; type 'redshift -m METHOD:help' to see the settings.
3567 ; ex: 'redshift -m randr:help'
3568 ; In this example, randr is configured to adjust screen 1.
3569 ; Note that the numbering starts from 0, so this is actually the
3570 ; second screen. If this option is not specified, Redshift will try
3571 ; to adjust _all_ screens.
3572 ;[randr]
3573 ;screen=1
3574 #+end_src
3575
3576 ** rofi
3577 :PROPERTIES:
3578 :header-args+: :tangle ~/.config/rofi/config
3579 :END:
3580
3581 #+begin_src conf
3582 rofi.font: Ubuntu Mono 13
3583 ! rofi.font: Inconsolata 16
3584 ! rofi.font: Iosevka 13
3585 ! rofi.font: Source Code Pro 11
3586 rofi.modi: run,window
3587 ! rofi.width: 640
3588 rofi.width: 600
3589 !rofi.location: 2
3590 !rofi.yoffset: 200
3591 rofi.monitor: -1
3592 !rofi.lines: 10
3593
3594 !rofi.theme: /usr/share/rofi/themes//Arc.rasi
3595 !rofi.theme: /usr/share/rofi/themes//Paper.rasi
3596 !rofi.theme: /usr/share/rofi/themes//sidebar.rasi
3597
3598 rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
3599 #+end_src
3600
3601 ** rofi-pass
3602 :PROPERTIES:
3603 :header-args+: :tangle ~/.config/rofi-pass/config
3604 :END:
3605
3606 #+begin_src conf
3607 # permanently set alternative root dir
3608 # root=/path/to/root
3609
3610 # rofi command. Make sure to have "$@" as last argument
3611 _rofi () {
3612     #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
3613     rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
3614 }
3615
3616 # xdotool needs the keyboard layout to be set using setxkbmap
3617 # You can do this in your autostart scripts (e.g. xinitrc)
3618
3619 # If for some reason, you cannot do this, you can set the command here.
3620 # and set fix_layout to true
3621 fix_layout=false
3622
3623 layout_cmd () {
3624   setxkbmap us
3625 }
3626
3627 # fields to be used
3628 URL_field='url'
3629 USERNAME_field='user'
3630 AUTOTYPE_field='autotype'
3631
3632 # delay to be used for :delay keyword
3633 delay=2
3634
3635 ## Programs to be used
3636 # Editor
3637 EDITOR='gvim -f'
3638
3639 # Browser
3640 BROWSER='chromium'
3641
3642 ## Misc settings
3643
3644 default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
3645 auto_enter='false'
3646 notify='false'
3647 default_autotype='user :tab pass'
3648
3649 # color of the help messages
3650 # leave empty for autodetection
3651 help_color="#4872FF"
3652
3653 # Clipboard settings
3654 # Possible options: primary, clipboard, both
3655 clip=primary
3656
3657 # Options for generating new password entries
3658 # default_user is also used for password files that have no user field.
3659 default_user=aminb
3660 default_user2=aminban
3661 password_length=30
3662
3663 # Custom Keybindings
3664 #autotype="Alt+1"
3665 autotype="Alt+m"
3666 type_user="Alt+2"
3667 type_pass="Alt+3"
3668 open_url="Alt+4"
3669 copy_name="Alt+u"
3670 copy_url="Alt+l"
3671 copy_pass="Alt+p"
3672 show="Alt+o"
3673 copy_entry="Alt+2"
3674 type_entry="Alt+1"
3675 copy_menu="Alt+c"
3676 action_menu="Alt+a"
3677 type_menu="Alt+t"
3678 help="Alt+h"
3679 switch="Alt+x"
3680 insert_pass="Alt+n"
3681 #+end_src
3682
3683 ** sway
3684 :PROPERTIES:
3685 :header-args+: :tangle ~/.config/sway/config
3686 :END:
3687
3688 #+begin_src conf
3689 exec xrdb .Xresources
3690 exec dunst
3691 ### Variables
3692 # super
3693 set $mod Mod4
3694 # alt
3695 set $mod2 Mod1
3696 set $left h
3697 set $down j
3698 set $up k
3699 set $right l
3700 set $term urxvt
3701 set $menu rofi -show run -display-run '> ' -display-window ' 🗔 '
3702
3703 ### Output configuration
3704 #
3705 # Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/)
3706 output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
3707 #
3708 # Example configuration:
3709 #
3710 #   output HDMI-A-1 resolution 1920x1080 position 1920,0
3711 #
3712 # You can get the names of your outputs by running: swaymsg -t get_outputs
3713
3714 ### Idle configuration
3715 #
3716 # Example configuration:
3717 #
3718 #exec swayidle \
3719 #    timeout 300 'swaylock -c 000000' \
3720 #    timeout 600 'swaymsg "output * dpms off"' \
3721 #       resume 'swaymsg "output * dpms on"' \
3722 #    before-sleep 'swaylock -c 000000'
3723 #
3724 # This will lock your screen after 300 seconds of inactivity, then turn off
3725 # your displays after another 600 seconds, and turn your screens back on when
3726 # resumed. It will also lock your screen before your computer goes to sleep.
3727
3728 ### Input configuration
3729
3730 input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
3731     dwt enabled
3732     tap enabled
3733     natural_scroll enabled
3734     middle_emulation enabled
3735     click_method clickfinger
3736 }
3737
3738 input "1:1:AT_Translated_Set_2_keyboard" {
3739     repeat_delay 200
3740     repeat_rate 45
3741     xkb_layout us,ir
3742     xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
3743 }
3744
3745
3746 ### Key bindings
3747 #
3748 # Basics:
3749 #
3750     # start a terminal
3751     bindsym $mod+Return exec $term
3752
3753     # kill focused window
3754     bindsym $mod+Shift+q kill
3755
3756     # start your launcher
3757     bindsym $mod+d exec $menu
3758
3759     # Drag floating windows by holding down $mod and left mouse button.
3760     # Resize them with right mouse button + $mod.
3761     # Despite the name, also works for non-floating windows.
3762     # Change normal to inverse to use left mouse button for resizing and right
3763     # mouse button for dragging.
3764     floating_modifier $mod normal
3765
3766     # reload the configuration file
3767     bindsym $mod+Shift+c reload
3768
3769     # exit sway (logs you out of your wayland session)
3770     bindsym $mod+Shift+e exit
3771
3772     bindsym $mod+apostrophe exec rofi-light        # rofi-based brightness chooser
3773     bindsym XF86MonBrightnessUp exec light -A 5    # increase screen brightness
3774     bindsym XF86MonBrightnessDown exec light -U 5  # decrease screen brightness
3775
3776     bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
3777     bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
3778     bindsym XF86AudioMute exec pamixer --toggle-mute
3779     bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
3780
3781     # original sway workspace switch and window move
3782     bindsym $mod+bracketleft workspace prev
3783     bindsym $mod+bracketright workspace next
3784     bindsym $mod+braceleft move container to workspace prev
3785     bindsym $mod+braceright move container to workspace next
3786
3787     # bspwm-esque workspace switch and window move
3788     bindsym $mod2+bracketleft exec sway-ws-util switch prev
3789     bindsym $mod2+bracketright exec sway-ws-util switch next
3790     bindsym $mod2+braceleft exec sway-ws-util move prev follow
3791     bindsym $mod2+braceright exec sway-ws-util move next follow
3792 #
3793 # Moving around:
3794 #
3795     # Move your focus around
3796     bindsym $mod+$left focus left
3797     bindsym $mod+$down focus down
3798     bindsym $mod+$up focus up
3799     bindsym $mod+$right focus right
3800     # or use $mod+[up|down|left|right]
3801     bindsym $mod+Left focus left
3802     bindsym $mod+Down focus down
3803     bindsym $mod+Up focus up
3804     bindsym $mod+Right focus right
3805
3806     # _move_ the focused window with the same, but add Shift
3807     bindsym $mod+Shift+$left move left
3808     bindsym $mod+Shift+$down move down
3809     bindsym $mod+Shift+$up move up
3810     bindsym $mod+Shift+$right move right
3811     # ditto, with arrow keys
3812     bindsym $mod+Shift+Left move left
3813     bindsym $mod+Shift+Down move down
3814     bindsym $mod+Shift+Up move up
3815     bindsym $mod+Shift+Right move right
3816 #
3817 # Workspaces:
3818 #
3819     # switch to workspace
3820     bindsym $mod+1 workspace 1
3821     bindsym $mod+2 workspace 2
3822     bindsym $mod+3 workspace 3
3823     bindsym $mod+4 workspace 4
3824     bindsym $mod+5 workspace 5
3825     bindsym $mod+6 workspace 6
3826     bindsym $mod+7 workspace 7
3827     bindsym $mod+8 workspace 8
3828     bindsym $mod+9 workspace 9
3829     bindsym $mod+0 workspace 10
3830     # move focused container to workspace
3831     bindsym $mod+Shift+1 move container to workspace 1
3832     bindsym $mod+Shift+2 move container to workspace 2
3833     bindsym $mod+Shift+3 move container to workspace 3
3834     bindsym $mod+Shift+4 move container to workspace 4
3835     bindsym $mod+Shift+5 move container to workspace 5
3836     bindsym $mod+Shift+6 move container to workspace 6
3837     bindsym $mod+Shift+7 move container to workspace 7
3838     bindsym $mod+Shift+8 move container to workspace 8
3839     bindsym $mod+Shift+9 move container to workspace 9
3840     bindsym $mod+Shift+0 move container to workspace 10
3841     # Note: workspaces can have any name you want, not just numbers.
3842     # We just use 1-10 as the default.
3843 #
3844 # Layout stuff:
3845 #
3846     # You can "split" the current object of your focus with
3847     # $mod+b or $mod+v, for horizontal and vertical splits
3848     # respectively.
3849     bindsym $mod+b splith
3850     bindsym $mod+v splitv
3851
3852     # Switch the current container between different layout styles
3853     bindsym $mod+s layout stacking
3854     bindsym $mod+w layout tabbed
3855     bindsym $mod+e layout toggle split
3856
3857     # Make the current focus fullscreen
3858     bindsym $mod+f fullscreen
3859
3860     # Toggle the current focus between tiling and floating mode
3861     bindsym $mod+Shift+space floating toggle
3862
3863     # Swap focus between the tiling area and the floating area
3864     bindsym $mod+space focus mode_toggle
3865
3866     # move focus to the parent container
3867     bindsym $mod+a focus parent
3868 #
3869 # Scratchpad:
3870 #
3871     # Sway has a "scratchpad", which is a bag of holding for windows.
3872     # You can send windows there and get them back later.
3873
3874     # Move the currently focused window to the scratchpad
3875     bindsym $mod+Shift+minus move scratchpad
3876
3877     # Show the next scratchpad window or hide the focused scratchpad window.
3878     # If there are multiple scratchpad windows, this command cycles through them.
3879     bindsym $mod+minus scratchpad show
3880 #
3881 # Resizing containers:
3882 #
3883 mode "resize" {
3884     # left will shrink the containers width
3885     # right will grow the containers width
3886     # up will shrink the containers height
3887     # down will grow the containers height
3888     bindsym $left resize shrink width 10px
3889     bindsym $down resize grow height 10px
3890     bindsym $up resize shrink height 10px
3891     bindsym $right resize grow width 10px
3892
3893     # ditto, with arrow keys
3894     bindsym Left resize shrink width 10px
3895     bindsym Down resize grow height 10px
3896     bindsym Up resize shrink height 10px
3897     bindsym Right resize grow width 10px
3898
3899     # return to default mode
3900     bindsym Return mode "default"
3901     bindsym Escape mode "default"
3902 }
3903 bindsym $mod+Shift+r mode "resize"
3904
3905 #
3906 # Status Bar:
3907 #
3908 # Read `man 5 sway-bar` for more information about this section.
3909 bar {
3910     position bottom
3911     colors {
3912         statusline #ffffff
3913         background #323232
3914         inactive_workspace #32323200 #32323200 #5c5c5c
3915     }
3916     status_command i3gs ~/.config/i3gs/config
3917 }
3918
3919 include /etc/sway/config.d/*
3920 #+end_src
3921
3922 ** TLP
3923
3924 *** TODO enigma
3925 *** plasma
3926
3927 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/default/tlp")
3928 # ------------------------------------------------------------------------------
3929 # tlp - Parameters for power saving
3930 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
3931
3932 # Hint: some features are disabled by default, remove the leading # to enable
3933 # them.
3934
3935 # Set to 0 to disable, 1 to enable TLP.
3936 TLP_ENABLE=1
3937
3938 # Operation mode when no power supply can be detected: AC, BAT.
3939 # Concerns some desktop and embedded hardware only.
3940 TLP_DEFAULT_MODE=AC
3941
3942 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
3943 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
3944 TLP_PERSISTENT_DEFAULT=0
3945
3946 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
3947 # Non-zero value enables, zero disables laptop mode.
3948 DISK_IDLE_SECS_ON_AC=0
3949 DISK_IDLE_SECS_ON_BAT=2
3950
3951 # Dirty page values (timeouts in secs).
3952 MAX_LOST_WORK_SECS_ON_AC=15
3953 MAX_LOST_WORK_SECS_ON_BAT=60
3954
3955 # Hint: CPU parameters below are disabled by default, remove the leading #
3956 # to enable them, otherwise kernel default values are used.
3957
3958 # Select a CPU frequency scaling governor.
3959 # Intel Core i processor with intel_pstate driver:
3960 #   powersave(*), performance.
3961 # Older hardware with acpi-cpufreq driver:
3962 #   ondemand(*), powersave, performance, conservative, schedutil.
3963 # (*) is recommended.
3964 # Hint: use tlp-stat -p to show the active driver and available governors.
3965 # Important:
3966 #   powersave for intel_pstate and ondemand for acpi-cpufreq are power
3967 #   efficient for *almost all* workloads and therefore kernel and most
3968 #   distributions have chosen them as defaults. If you still want to change,
3969 #   you should know what you're doing! You *must* disable your distribution's
3970 #   governor settings or conflicts will occur.
3971 #CPU_SCALING_GOVERNOR_ON_AC=powersave
3972 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
3973
3974 # Set the min/max frequency available for the scaling governor.
3975 # Possible values strongly depend on your CPU. For available frequencies see
3976 # the output of tlp-stat -p.
3977 #CPU_SCALING_MIN_FREQ_ON_AC=0
3978 #CPU_SCALING_MAX_FREQ_ON_AC=0
3979 #CPU_SCALING_MIN_FREQ_ON_BAT=0
3980 #CPU_SCALING_MAX_FREQ_ON_BAT=0
3981
3982 # Set energy performance hints (HWP) for Intel P-state governor:
3983 #   performance, balance_performance, default, balance_power, power
3984 # Values are given in order of increasing power saving.
3985 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
3986 CPU_HWP_ON_AC=balance_performance
3987 CPU_HWP_ON_BAT=balance_power
3988
3989 # Set Intel P-state performance: 0..100 (%).
3990 # Limit the max/min P-state to control the power dissipation of the CPU.
3991 # Values are stated as a percentage of the available performance.
3992 # Requires an Intel Core i processor with intel_pstate driver.
3993 #CPU_MIN_PERF_ON_AC=0
3994 #CPU_MAX_PERF_ON_AC=100
3995 #CPU_MIN_PERF_ON_BAT=0
3996 #CPU_MAX_PERF_ON_BAT=30
3997
3998 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
3999 # Requires an Intel Core i processor.
4000 # Important:
4001 # - This may conflict with your distribution's governor settings
4002 # - A value of 1 does *not* activate boosting, it just allows it
4003 #CPU_BOOST_ON_AC=1
4004 #CPU_BOOST_ON_BAT=0
4005
4006 # Minimize number of used CPU cores/hyper-threads under light load conditions:
4007 #   0=disable, 1=enable.
4008 SCHED_POWERSAVE_ON_AC=0
4009 SCHED_POWERSAVE_ON_BAT=1
4010
4011 # Kernel NMI Watchdog:
4012 #   0=disable (default, saves power), 1=enable (for kernel debugging only).
4013 NMI_WATCHDOG=0
4014
4015 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
4016 # Frequency voltage pairs are written to:
4017 #   /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
4018 # CAUTION: only use this, if you thoroughly understand what you are doing!
4019 #PHC_CONTROLS="F:V F:V F:V F:V"
4020
4021 # Set CPU performance versus energy savings policy:
4022 #   performance, balance-performance, default, balance-power, power.
4023 # Values are given in order of increasing power saving.
4024 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
4025 ENERGY_PERF_POLICY_ON_AC=performance
4026 ENERGY_PERF_POLICY_ON_BAT=balance-power
4027
4028 # Disk devices; separate multiple devices with spaces (default: sda).
4029 # Devices can be specified by disk ID also (lookup with: tlp diskid).
4030 DISK_DEVICES="sda sdb"
4031
4032 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
4033 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
4034 # Separate values for multiple disks with spaces. Use the special value 'keep'
4035 # to keep the hardware default for the particular disk.
4036 DISK_APM_LEVEL_ON_AC="254 254"
4037 DISK_APM_LEVEL_ON_BAT="128 128"
4038
4039 # Hard disk spin down timeout:
4040 #   0:        spin down disabled
4041 #   1..240:   timeouts from 5s to 20min (in units of 5s)
4042 #   241..251: timeouts from 30min to 5.5 hours (in units of 30min)
4043 # See 'man hdparm' for details.
4044 # Separate values for multiple disks with spaces. Use the special value 'keep'
4045 # to keep the hardware default for the particular disk.
4046 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
4047 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
4048
4049 # Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
4050 # Separate values for multiple disks with spaces. Use the special value 'keep'
4051 # to keep the kernel default scheduler for the particular disk.
4052 #DISK_IOSCHED="cfq cfq"
4053
4054 # AHCI link power management (ALPM) for disk devices:
4055 #   min_power, med_power_with_dipm(*), medium_power, max_performance.
4056 # (*) Kernel >= 4.15 required, then recommended.
4057 # Multiple values separated with spaces are tried sequentially until success.
4058 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
4059 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
4060
4061 # Exclude host devices from AHCI link power management.
4062 # Separate multiple hosts with spaces.
4063 #SATA_LINKPWR_BLACKLIST="host1"
4064
4065 # Runtime Power Management for AHCI host and disks devices:
4066 #   on=disable, auto=enable.
4067 # EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
4068 #AHCI_RUNTIME_PM_ON_AC=on
4069 #AHCI_RUNTIME_PM_ON_BAT=on
4070
4071 # Seconds of inactivity before disk is suspended.
4072 AHCI_RUNTIME_PM_TIMEOUT=15
4073
4074 # PCI Express Active State Power Management (PCIe ASPM):
4075 #   default, performance, powersave.
4076 PCIE_ASPM_ON_AC=performance
4077 PCIE_ASPM_ON_BAT=powersave
4078
4079 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
4080 # auto = mid on BAT, high on AC; default = use hardware defaults.
4081 RADEON_POWER_PROFILE_ON_AC=high
4082 RADEON_POWER_PROFILE_ON_BAT=low
4083
4084 # Radeon dynamic power management method (DPM): battery, performance.
4085 RADEON_DPM_STATE_ON_AC=performance
4086 RADEON_DPM_STATE_ON_BAT=battery
4087
4088 # Radeon DPM performance level: auto, low, high; auto is recommended.
4089 RADEON_DPM_PERF_LEVEL_ON_AC=auto
4090 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4091
4092 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4093 WIFI_PWR_ON_AC=off
4094 WIFI_PWR_ON_BAT=on
4095
4096 # Disable wake on LAN: Y/N.
4097 WOL_DISABLE=Y
4098
4099 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4100 # A value of 0 disables, >=1 enables power saving (recommended: 1).
4101 SOUND_POWER_SAVE_ON_AC=0
4102 SOUND_POWER_SAVE_ON_BAT=0
4103
4104 # Disable controller too (HDA only): Y/N.
4105 SOUND_POWER_SAVE_CONTROLLER=N
4106
4107 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4108 # Drive can be powered on again by releasing (and reinserting) the eject lever
4109 # or by pressing the disc eject button on newer models.
4110 # Note: an UltraBay/MediaBay hard disk is never powered off.
4111 BAY_POWEROFF_ON_AC=0
4112 BAY_POWEROFF_ON_BAT=0
4113 # Optical drive device to power off (default sr0).
4114 BAY_DEVICE="sr0"
4115
4116 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4117 RUNTIME_PM_ON_AC=on
4118 RUNTIME_PM_ON_BAT=auto
4119
4120 # Exclude PCI(e) device adresses the following list from Runtime PM
4121 # (separate with spaces). Use lspci to get the adresses (1st column).
4122 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4123 RUNTIME_PM_BLACKLIST="01:00.0"
4124
4125 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4126 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4127 # prevents accidential power-on of dGPU in hybrid graphics setups.
4128 # Use "" to disable the feature completely.
4129 # Separate multiple drivers with spaces.
4130 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4131
4132 # Set to 0 to disable, 1 to enable USB autosuspend feature.
4133 USB_AUTOSUSPEND=1
4134
4135 # Exclude listed devices from USB autosuspend (separate with spaces).
4136 # Use lsusb to get the ids.
4137 # Note: input devices (usbhid) are excluded automatically
4138 #USB_BLACKLIST="1111:2222 3333:4444"
4139
4140 # Bluetooth devices are excluded from USB autosuspend:
4141 #   0=do not exclude, 1=exclude.
4142 USB_BLACKLIST_BTUSB=0
4143
4144 # Phone devices are excluded from USB autosuspend:
4145 #   0=do not exclude, 1=exclude (enable charging).
4146 USB_BLACKLIST_PHONE=0
4147
4148 # Printers are excluded from USB autosuspend:
4149 #   0=do not exclude, 1=exclude.
4150 USB_BLACKLIST_PRINTER=1
4151
4152 # WWAN devices are excluded from USB autosuspend:
4153 #   0=do not exclude, 1=exclude.
4154 USB_BLACKLIST_WWAN=1
4155
4156 # Include listed devices into USB autosuspend even if already excluded
4157 # by the blacklists above (separate with spaces).
4158 # Use lsusb to get the ids.
4159 #USB_WHITELIST="1111:2222 3333:4444"
4160
4161 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4162 # (workaround for USB devices that cause shutdown problems).
4163 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4164
4165 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4166 # on system startup: 0=disable, 1=enable.
4167 # Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4168 #   are ignored when this is enabled!
4169 #RESTORE_DEVICE_STATE_ON_STARTUP=0
4170 RESTORE_DEVICE_STATE_ON_STARTUP=1
4171
4172 # Radio devices to disable on startup: bluetooth, wifi, wwan.
4173 # Separate multiple devices with spaces.
4174 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
4175
4176 # Radio devices to enable on startup: bluetooth, wifi, wwan.
4177 # Separate multiple devices with spaces.
4178 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4179
4180 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4181 # (workaround for devices that are blocking shutdown).
4182 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4183
4184 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4185 # (to prevent other operating systems from missing radios).
4186 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4187
4188 # Radio devices to enable on AC: bluetooth, wifi, wwan.
4189 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4190
4191 # Radio devices to disable on battery: bluetooth, wifi, wwan.
4192 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4193
4194 # Radio devices to disable on battery when not in use (not connected):
4195 #   bluetooth, wifi, wwan.
4196 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4197
4198 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4199 # required). Charging starts when the remaining capacity falls below the
4200 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4201 # Main / Internal battery (values in %)
4202 #START_CHARGE_THRESH_BAT0=75
4203 #STOP_CHARGE_THRESH_BAT0=80
4204 # Ultrabay / Slice / Replaceable battery (values in %)
4205 #START_CHARGE_THRESH_BAT1=75
4206 #STOP_CHARGE_THRESH_BAT1=80
4207
4208 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4209 #RESTORE_THRESHOLDS_ON_BAT=1
4210
4211 # ------------------------------------------------------------------------------
4212 # tlp-rdw - Parameters for the radio device wizard
4213 # Possible devices: bluetooth, wifi, wwan.
4214
4215 # Hints:
4216 # - Parameters are disabled by default, remove the leading # to enable them
4217 # - Separate multiple radio devices with spaces
4218
4219 # Radio devices to disable on connect.
4220 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4221 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4222 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4223
4224 # Radio devices to enable on disconnect.
4225 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4226 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4227 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4228
4229 # Radio devices to enable/disable when docked.
4230 #DEVICES_TO_ENABLE_ON_DOCK=""
4231 #DEVICES_TO_DISABLE_ON_DOCK=""
4232
4233 # Radio devices to enable/disable when undocked.
4234 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4235 #DEVICES_TO_DISABLE_ON_UNDOCK=""
4236 #+end_src
4237
4238 ** X
4239
4240 *** xprofile
4241 :PROPERTIES:
4242 :header-args+: :tangle ~/.xprofile
4243 :END:
4244
4245 =~/.xprofile= is similar in style to =~/.xinitrc=, but on the
4246 contrary, it's automatically sourced by LightDM, my display manager of
4247 choice.
4248
4249 #+begin_src sh :tangle no
4250 xset -b  # disable bell
4251 xset r rate 200 45  # repeat delay (ms) and rate (repeats/sec)
4252
4253 # setxkbmap -option compose:ralt
4254
4255 setxkbmap -option ctrl:nocaps          # turn capslock into control
4256 setxkbmap -option altwin:swap_alt_win  # swap alt and super
4257
4258 if [ $(hostname) = "plasma" ]
4259 then
4260     setxkbmap -option ctrl:rctrl_ralt  # turn right control into right alt
4261 fi
4262
4263 if [ $(hostname) = "enigma" ]
4264 then
4265     xmodmap -e "keycode 135 = Alt_R"  # remap menu key to alt
4266 fi
4267
4268 light -Scrs "intel_backlight" 2
4269
4270 source $HOME/.zprofile
4271
4272 export _JAVA_AWT_WM_NONREPARENTING=1
4273 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4274
4275 if [ $(hostname) = "plasma" ]
4276 then
4277     unlock-def-gk.py &
4278 fi
4279
4280 bspwm &
4281 #+end_src
4282
4283 *** X resources
4284
4285 **** Xresources
4286 :PROPERTIES:
4287 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
4288 :END:
4289
4290 #+begin_src conf-xdefaults
4291 #include ".Xresources.d/fonts"
4292 ! #include ".Xresources.d/colors"
4293 #include ".Xresources.d/emacs"
4294 #include ".Xresources.d/rxvt-unicode"
4295 #+end_src
4296
4297 **** Xresources.d
4298
4299 ***** fonts
4300 :PROPERTIES:
4301 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
4302 :END:
4303
4304 #+begin_src conf-xdefaults
4305 Xft.lcdfilter: lcddefault
4306 Xft.antialias: true
4307 Xft.autohint: 0
4308 Xft.hinting: true
4309 Xft.hintstyle: hintslight
4310 ! Xft.hintstyle: hintfull
4311 Xft.rgba: rgb
4312 Xft.dpi: 96
4313 #+end_src
4314
4315 ***** colors
4316 :PROPERTIES:
4317 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
4318 :END:
4319
4320 #+begin_src conf-xdefaults :tangle no
4321 #include "gruvbox-light.xresources"
4322 ! #include "gruvbox-dark.xresources"
4323 #include "gruvbox-urxvt256.xresources"
4324 #+end_src
4325
4326 #+begin_src conf-xdefaults :tangle no
4327 ! -----------------------------------------------------------------------------
4328 ! File: gruvbox-light.xresources
4329 ! Description: Retro groove colorscheme generalized
4330 ! Author: morhetz <morhetz@gmail.com>
4331 ! Source: https://github.com/morhetz/gruvbox-generalized
4332 ! Last Modified: 6 Sep 2014
4333 ! -----------------------------------------------------------------------------
4334
4335 ! hard contrast: *background: #f9f5d7
4336 *background: #fbf1c7
4337 ! soft contrast: *background: #f2e5bc
4338 *foreground: #3c3836
4339 ! Black + DarkGrey
4340 *color0:  #fdf4c1
4341 *color8:  #928374
4342 ! DarkRed + Red
4343 *color1:  #cc241d
4344 *color9:  #9d0006
4345 ! DarkGreen + Green
4346 *color2:  #98971a
4347 *color10: #79740e
4348 ! DarkYellow + Yellow
4349 *color3:  #d79921
4350 *color11: #b57614
4351 ! DarkBlue + Blue
4352 *color4:  #458588
4353 *color12: #076678
4354 ! DarkMagenta + Magenta
4355 *color5:  #b16286
4356 *color13: #8f3f71
4357 ! DarkCyan + Cyan
4358 *color6:  #689d6a
4359 *color14: #427b58
4360 ! LightGrey + White
4361 *color7:  #7c6f64
4362 *color15: #3c3836
4363 #+end_src
4364
4365 #+begin_src conf-xdefaults :tangle no
4366 ! -----------------------------------------------------------------------------
4367 ! File: gruvbox-dark.xresources
4368 ! Description: Retro groove colorscheme generalized
4369 ! Author: morhetz <morhetz@gmail.com>
4370 ! Source: https://github.com/morhetz/gruvbox-generalized
4371 ! Last Modified: 6 Sep 2014
4372 ! -----------------------------------------------------------------------------
4373
4374 ! hard contrast: *background: #1d2021
4375 *background: #282828
4376 ! soft contrast: *background: #32302f
4377 *foreground: #ebdbb2
4378 ! Black + DarkGrey
4379 *color0:  #282828
4380 *color8:  #928374
4381 ! DarkRed + Red
4382 *color1:  #cc241d
4383 *color9:  #fb4934
4384 ! DarkGreen + Green
4385 *color2:  #98971a
4386 *color10: #b8bb26
4387 ! DarkYellow + Yellow
4388 *color3:  #d79921
4389 *color11: #fabd2f
4390 ! DarkBlue + Blue
4391 *color4:  #458588
4392 *color12: #83a598
4393 ! DarkMagenta + Magenta
4394 *color5:  #b16286
4395 *color13: #d3869b
4396 ! DarkCyan + Cyan
4397 *color6:  #689d6a
4398 *color14: #8ec07c
4399 ! LightGrey + White
4400 *color7:  #a89984
4401 *color15: #ebdbb2
4402 #+end_src
4403
4404 #+begin_src conf-xdefaults :tangle no
4405 ! -----------------------------------------------------------------------------
4406 ! File: gruvbox-urxvt256.xresources
4407 ! Description: Retro groove colorscheme generalized
4408 ! Author: morhetz <morhetz@gmail.com>
4409 ! Source: https://github.com/morhetz/gruvbox-generalized
4410 ! Last Modified: 13 Dec 2013
4411 ! -----------------------------------------------------------------------------
4412
4413 URxvt.color24:  #076678
4414 URxvt.color66:  #427b58
4415 URxvt.color88:  #9d0006
4416 URxvt.color96:  #8f3f71
4417 URxvt.color100: #79740e
4418 URxvt.color108: #8ec07c
4419 URxvt.color109: #83a598
4420 URxvt.color130: #af3a03
4421 URxvt.color136: #b57614
4422 URxvt.color142: #b8bb26
4423 URxvt.color167: #fb4934
4424 URxvt.color175: #d3869b
4425 URxvt.color208: #fe8019
4426 URxvt.color214: #fabd2f
4427 URxvt.color223: #ebdbb2
4428 URxvt.color228: #f2e5bc
4429 URxvt.color229: #fbf1c7
4430 URxvt.color230: #f9f5d7
4431 URxvt.color234: #1d2021
4432 URxvt.color235: #282828
4433 URxvt.color236: #32302f
4434 URxvt.color237: #3c3836
4435 URxvt.color239: #504945
4436 URxvt.color241: #665c54
4437 URxvt.color243: #7c6f64
4438 URxvt.color244: #928374
4439 URxvt.color245: #928374
4440 URxvt.color246: #a89984
4441 URxvt.color248: #bdae93
4442 URxvt.color250: #d5c4a1
4443 #+end_src
4444
4445 ***** emacs
4446 :PROPERTIES:
4447 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
4448 :END:
4449
4450 #+begin_src conf-xdefaults
4451 Emacs.menuBar: off
4452 Emacs.toolBar: off
4453 Emacs.verticalScrollBars: off
4454 Emacs.cursorBlink: off
4455 Emacs.FontBackend: xft,x
4456 ! Emacs.font: Ubuntu Mono-12
4457 ! Emacs.font: Triplicate T4C-11
4458 ! Emacs.font: Ubuntu Mono-10.5
4459 ! Emacs.font: Ubuntu Mono-12
4460 ! Emacs.font: Iosevka-11
4461
4462 ! Emacs.font: Fira Mono:size=15
4463 ! Emacs.font: DejaVu Sans Mono:size=15
4464 ! Emacs.font: Inconsolata:size=17
4465 ! Emacs.font: Inconsolata:size=16
4466 ! Emacs.font: Inconsolata LGC:size=14
4467 ! Emacs.font: Source Code Pro Medium-10.5
4468 Emacs.font: Ubuntu Mono:size=16
4469 ! Emacs.font: Iosevka:size=16
4470 #+end_src
4471
4472 ***** rxvt-unicode
4473 :PROPERTIES:
4474 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
4475 :END:
4476
4477 #+begin_src conf-xdefaults
4478 ! Font
4479 URxvt.font:             xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
4480 URxvt.boldFont:         xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
4481 URxvt.italicFont:       xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
4482 URxvt.bolditalicFont:   xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
4483
4484 URxvt.xftAntialias:     true
4485 URxvt.letterSpace:      0
4486
4487 URxvt.depth:                0
4488 URxvt.loginShell:           true
4489 URxvt.saveLines:            100000
4490 URxvt.internalBorder:       3
4491 URxvt.lineSpace:            0
4492 URxvt.scrollBar:            false
4493 URxvt.scrollStyle:          rxvt
4494 URxvt*scrollTtyOutput:      false
4495 URxvt*scrollWithBuffer:     true
4496 URxvt*scrollTtyKeypress:    true
4497 URxvt.keysym.Shift-Up:      command:\033]720;1\007
4498 URxvt.keysym.Shift-Down:    command:\033]721;1\007
4499
4500 URxvt.perl-ext-common:      default,clipboard,url-select,keyboard-select
4501 URxvt.perl-ext:             bidi
4502 URxvt.bidi.enabled:         1
4503 URxvt.url-select.launcher:  firefox
4504 URxvt.url-select.underline: true
4505 URxvt.keysym.M-u:           perl:url-select:select_next
4506 URxvt.keysym.M-Escape:      perl:keyboard-select:activate
4507 URxvt.keysym.M-s:           perl:keyboard-select:search
4508 URxvt.url-launcher:         /usr/bin/firefox
4509 URxvt.matcher.button:       1
4510 URxvt.iso14755:             false
4511 URxvt.iso14755_53:          false
4512 URxvt.keysym.M-c:           perl:clipboard:copy
4513 URxvt.keysym.M-v:           perl:clipboard:paste
4514 URxvt.keysym.C-A-V:         perl:clipboard:paste_escaped
4515 URxvt.keysym.C-Up:          font-size:increase
4516 URxvt.keysym.C-Down:        font-size:decrease
4517 URxvt.keysym.C-S-Up:        font-size:incglobal
4518 URxvt.keysym.C-S-Down:      font-size:decglobal
4519 URxvt.keysym.C-equal:       font-size:reset
4520 !URxvt.keysym.C-question:   font-size:show
4521
4522 URxvt.iconFile:             /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
4523
4524 !urxvt*foreground: white
4525 !urxvt*background: black
4526
4527 !*color0:  #2E3436
4528 !*color1:  #a40000
4529 !*color2:  #4E9A06
4530 !*color3:  #C4A000
4531 !*color4:  #3465A4
4532 !*color5:  #75507B
4533 !*color6:  #ce5c00
4534 !*color7:  #babdb9
4535 !*color8:  #555753
4536 !*color9:  #EF2929
4537 !*color10: #8AE234
4538 !*color11: #FCE94F
4539 !*color12: #729FCF
4540 !*color13: #AD7FA8
4541 !*color14: #fcaf3e
4542 !*color15: #EEEEEC
4543
4544 !URxvt.foreground: #C8C8C8
4545 !URxvt.background: #FFFFFF
4546
4547 !! black
4548 !*color0:  #2E3436
4549 !*color8:  #555753
4550 !! red
4551 !*color1:  #a40000
4552 !*color9:  #EF2929
4553 !! green
4554 !*color2:  #4E9A06
4555 !*color10: #8AE234
4556 !! yellow
4557 !*color3:  #C4A000
4558 !*color11: #FCE94F
4559 !! blue
4560 !*color4:  #3465A4
4561 !*color12: #729FCF
4562 !! purple
4563 !*color5:  #75507B
4564 !*color13: #AD7FA8
4565 !! orange (replaces cyan)
4566 !*color6:  #ce5c00
4567 !*color14: #fcaf3e
4568 !! white
4569 !*color7:  #babdb9
4570 !*color15: #EEEEEC
4571
4572 ! Tango colour theme for rxvt-unicode
4573 URxvt.background: #FFFFFF
4574 URxvt.foreground: #000000
4575
4576 ! Black
4577 URxvt.color0: #2E3436
4578 URxvt.color8: #757773
4579
4580 ! Red
4581 URxvt.color1: #CC0000
4582 URxvt.color9: #EF2929
4583
4584 ! Green
4585 URxvt.color2: #4E9A06
4586 URxvt.color10: #8AE234
4587
4588 ! Yellow
4589 URxvt.color3: #C4A000
4590 URxvt.color11: #FCE94F
4591
4592 ! Blue
4593 URxvt.color4: #3465A4
4594 URxvt.color12: #729FCF
4595
4596 ! Magenta
4597 URxvt.color5: #75507B
4598 URxvt.color13: #AD7FA8
4599
4600 !! Cyan
4601 !URxvt.color6: #06989A
4602 !URxvt.color14: #34E2E2
4603 ! orange (replaces cyan)
4604 *color6:  #ce5c00
4605 *color14: #fcaf3e
4606
4607 ! White
4608 URxvt.color7: #D3D7CF
4609 URxvt.color15: #EEEEEC
4610 #+end_src
4611
4612 ** XDG
4613 :PROPERTIES:
4614 :header-args+: :tangle ~/.config/user-dirs.dirs
4615 :END:
4616
4617 #+begin_src conf
4618 XDG_DESKTOP_DIR="$HOME/Desktop"
4619 XDG_DOCUMENTS_DIR="$HOME/usr/docs"
4620 XDG_DOWNLOAD_DIR="$HOME/usr/dls"
4621 XDG_MUSIC_DIR="$HOME/usr/music"
4622 XDG_PICTURES_DIR="$HOME/usr/pics"
4623 XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
4624 XDG_TEMPLATES_DIR="$HOME/usr/Templates"
4625 XDG_VIDEOS_DIR="$HOME/usr/vids"
4626 #+end_src
4627
4628 ** Zathura
4629 :PROPERTIES:
4630 :header-args+: :tangle ~/.config/zathura/zathurarc
4631 :END:
4632
4633 #+begin_src conf
4634 set smooth-scroll true
4635 set selection-clipboard clipboard
4636 set zoom-step 05
4637 set default-bg "#272727"
4638 set statusbar-bg "#272727"
4639 set inputbar-bg "#373737"
4640 #+end_src
4641
4642 ** Zsh
4643
4644 My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
4645 [[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
4646 installed.
4647
4648 *** zimrc
4649 :PROPERTIES:
4650 :header-args+: :tangle ~/.zimrc
4651 :END:
4652
4653 #+begin_src sh
4654
4655
4656 #################
4657 # CORE SETTINGS #
4658 #################
4659
4660 #
4661 # Zim settings
4662 #
4663
4664 # Select what modules you would like enabled.
4665 # The second line of modules may depend on options set by modules in the first
4666 # line. These dependencies are noted on the respective module's README.md.
4667 zmodules=(directory environment git git-info history input ssh utility custom \
4668           syntax-highlighting history-substring-search prompt completion)
4669
4670
4671 ###################
4672 # MODULE SETTINGS #
4673 ###################
4674
4675 #
4676 # Prompt
4677 #
4678
4679 # Set your desired prompt here
4680 zprompt_theme='pure'
4681 #PURE_PROMPT_SYMBOL=λ
4682 #PURE_PROMPT_SYMBOL=δ
4683 PURE_PROMPT_SYMBOL=➜
4684
4685 #
4686 # Completion
4687 #
4688
4689 # set an optional host-specific filename for the completion cache file
4690 # if none is provided, the default '.zcompdump' is used.
4691 #zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
4692
4693 #
4694 # Utility
4695 #
4696
4697 # Uncomment to enable command correction prompts
4698 # See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
4699 setopt CORRECT
4700
4701 #
4702 # Environment
4703 #
4704
4705 # Set the string below to the desired terminal title format string.
4706 # The terminal title is redrawn upon directory change, however, variables like
4707 # ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
4708 #   http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
4709 # The example below uses the following format: 'username@host:/current/directory'
4710 ztermtitle='%n@%m:%~'
4711
4712 #
4713 # Input
4714 #
4715
4716 # Uncomment to enable double-dot expansion.
4717 # This appends '../' to your input for each '.' you type after an initial '..'
4718 #zdouble_dot_expand='true'
4719
4720 #
4721 # Syntax-Highlighting
4722 #
4723
4724 # This determines what highlighters will be used with the syntax-highlighting module.
4725 # Documentation of the highlighters can be found here:
4726 #   https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
4727 # For (u)rxvt, termite and gnome-terminal users,
4728 # removing the 'cursor' highlighter will fix the disappearing cursor problem
4729 #zhighlighters=(main brackets cursor)
4730 zhighlighters=(main brackets pattern)
4731
4732
4733 #
4734 # SSH
4735 #
4736
4737 # Load these ssh identities with the ssh module
4738 zssh_ids=(id_ed25519_mab)
4739
4740
4741 #
4742 # Pacman
4743 #
4744
4745 # Set (optional) pacman front-end.
4746 zpacman_frontend='yay'
4747
4748 # Load any helper scripts as defined here
4749 #zpacman_helper=(aur)
4750 #+end_src
4751
4752 *** zlogin
4753 :PROPERTIES:
4754 :header-args+: :tangle ~/.zlogin
4755 :END:
4756
4757 #+begin_src sh
4758
4759
4760 #
4761 # User configuration sourced by login shells
4762 #
4763
4764 # Initialize zim
4765 [[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
4766 #+end_src
4767
4768 *** zprofile
4769 :PROPERTIES:
4770 :header-args+: :tangle ~/.zprofile
4771 :END:
4772
4773 #+begin_src sh
4774 #PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
4775 #PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
4776 export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
4777 export XDG_CONFIG_HOME=$HOME/.config
4778 export XDG_DATA_HOME=$HOME/.local/share
4779 export XDG_DATA_DIRS=/usr/local/share:/usr/share
4780 export MAILDIR="$HOME/mail"
4781 export CVS_RSH=ssh
4782 #export MATHMODELS=$HOME/src/eiffel/mathmodels
4783 #export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
4784 #export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
4785
4786 # Eiffel2Java stuff
4787 #export JAVA_HOME=/usr/lib/jvm/default
4788 #export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
4789 #export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4790 #export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4791
4792 #export PATH="$HOME/usr/build/pvs:$PATH"
4793 #export SBCLISP_HOME=/usr/share/sbcl-source
4794 #export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
4795
4796 export MOZ_USE_XINPUT2=1  # precise scrolling in firefox
4797
4798 #export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
4799 #export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
4800
4801 if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
4802 #+end_src
4803
4804 *** zshenv
4805 :PROPERTIES:
4806 :header-args+: :tangle ~/.zshenv
4807 :END:
4808
4809 #+begin_src sh
4810 # Ensure that a non-login, non-interactive shell has a defined environment.
4811 if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
4812   source "${ZDOTDIR:-$HOME}/.zprofile"
4813 fi
4814 #+end_src
4815
4816 *** zshrc
4817 :PROPERTIES:
4818 :header-args+: :tangle ~/.zshrc
4819 :END:
4820
4821 #+begin_src sh
4822 # Bash-like navigation
4823 #export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
4824 #export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
4825 export WORDCHARS='*?[]~=&;!#$%^(){}<>'
4826 #ZLE_SPACE_SUFFIX_CHARS=$'|&'
4827
4828 #disable -r time       # disable shell reserved word
4829 #alias time='time -p'  # -p for POSIX output
4830
4831 # rehash if last command was pacaur or pacman
4832 # (so that zsh picks up changes in $PATH immediately)
4833 TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
4834
4835 #
4836 # User configuration sourced by interactive shells
4837 #
4838
4839 # Change default zim location
4840 export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
4841
4842 # Start zim
4843 [[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
4844
4845 ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
4846 #ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
4847
4848 setopt globdots
4849
4850 source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
4851 source ~/.zsh/zsh-autopair/autopair.zsh
4852
4853
4854 ### fzf ###
4855
4856 source /usr/share/fzf/key-bindings.zsh
4857 source /usr/share/fzf/completion.zsh
4858
4859 # Accept history selection instead of putting it on
4860 # the command line
4861 fzf-history-widget-accept() {
4862   fzf-history-widget
4863   zle accept-line
4864 }
4865 #zle     -N   fzf-history-widget-accept
4866 #bindkey '^R' fzf-history-widget-accept
4867
4868 # alt+c preview
4869 export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
4870
4871 ### fzf ###
4872
4873
4874 # aliases
4875 alias mpv="mpv --ytdl-format mp4"
4876 alias mv="mv -iv"
4877 alias cp="cp -iv"
4878 alias scl=systemctl
4879 alias jcl=journalctl
4880 alias m="mbsync -Va; getmail; notmuch new"
4881 alias best="youtube-dl -f best"
4882 alias nixx="ssh amin@nix.aminb.org"
4883 alias fence="ssh aminb@fencepost.gnu.org"
4884
4885 aur() {
4886    cd ~/usr/build
4887    git clone https://aur.archlinux.org/${1}.git
4888    cd ${1}
4889 }
4890
4891 # i-beam cursor
4892 echo -e "\033[5 q"
4893 #echo -e "\033[6 q"
4894 #+end_src
4895
4896 * Scripts
4897
4898 This section contains various useful scripts and the ones used by the
4899 programs above. For instance, =toggle-tablet= for switching to and
4900 from tablet mode on my X220T, =toggle-presentation-mode= for toggling
4901 Xfce's presentation mode which keeps the screen awake, and
4902 =rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
4903 exact brightness value.
4904
4905 ** battery-percentage-time
4906 :PROPERTIES:
4907 :header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/sh"
4908 :END:
4909
4910 #+begin_src sh
4911 dbus_send() {
4912         label=$1
4913         dbus-send --print-reply=literal --system \
4914                 --dest=org.freedesktop.UPower \
4915                 /org/freedesktop/UPower/devices/battery_BAT0 \
4916                 org.freedesktop.DBus.Properties.Get \
4917                 string:org.freedesktop.UPower.Device \
4918                 string:"${label}" | awk '{print $3}'
4919 }
4920
4921 perc=$(dbus_send 'Percentage')
4922 state=$(dbus_send 'State')
4923
4924 if [ "$state" -eq 2 ]; then  # Discharging
4925         secs=$(dbus_send 'TimeToEmpty')
4926 elif [ "$state" -eq 1 ]; then  # Charging
4927         secs=$(dbus_send 'TimeToFull')
4928 fi
4929
4930 printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60))
4931 #+end_src
4932
4933 ** rofi-light
4934 :PROPERTIES:
4935 :header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
4936 :END:
4937
4938 #+begin_src bash
4939 cur=$(light -G)
4940 val=$(rofi -dmenu -mesg "light    $cur" -p "light -S " -l 0 -width 12)
4941 light -S $val
4942 #+end_src
4943
4944 ** s (run sway)
4945 :PROPERTIES:
4946 :header-args+: :tangle ~/.local/bin/s :shebang "#!/bin/bash"
4947 :END:
4948
4949 #+begin_src bash
4950 export _JAVA_AWT_WM_NONREPARENTING=1
4951 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4952 light -Scrs "intel_backlight" 2
4953 source $HOME/.zprofile
4954 sway
4955 #+end_src
4956
4957 ** sway-ws-util
4958 :PROPERTIES:
4959 :header-args+: :tangle ~/.local/bin/sway-ws-util :shebang "#!/bin/bash"
4960 :END:
4961
4962 #+begin_src bash
4963 curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name')
4964 [[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1))
4965 [[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1))
4966 dest_ws=-1
4967 op=-1
4968
4969 if [ "$1" = "switch" ] || [ "$1" = "move" ]; then
4970   op="$1"
4971   if [ "$2" = "prev" ]; then
4972     dest_ws="$prev_ws"
4973   elif [ "$2" = "next" ]; then
4974     dest_ws="$next_ws"
4975   else
4976     echo "Usage: $0 $1 {prev|next} [follow]"
4977     exit 1
4978   fi
4979 else
4980   echo "Usage: $0 {switch|move} {prev|next} [follow]"
4981   exit 1
4982 fi
4983
4984 if [ "$op" = "switch" ]; then
4985   sway workspace "$dest_ws"
4986 elif [ "$op" = "move" ]; then
4987   sway move container to workspace "$dest_ws"
4988   if [ "$3" = "follow" ]; then
4989     sway workspace "$dest_ws"
4990   fi
4991 fi
4992 #+end_src
4993
4994 ** toggle-layout
4995 :PROPERTIES:
4996 :header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
4997 :END:
4998
4999 #+begin_src bash
5000 lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
5001
5002 if [ "$lang" = "us" ]; then
5003     setxkbmap ir
5004 else
5005     setxkbmap us
5006     # xmodmap $HOME/.Xmodmap
5007 fi
5008 #+end_src
5009
5010 ** toggle-presentation-mode
5011 :PROPERTIES:
5012 :header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
5013 :END:
5014
5015 #+begin_src bash
5016 xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
5017 #+end_src
5018
5019 ** toggle-tablet
5020 :PROPERTIES:
5021 :header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
5022 :END:
5023
5024 This script toggles between a 'normal' mode and a 'tablet' mode, doing
5025 a few things:
5026
5027 - rotates the screen using =xrandr=, so that rotating the physical
5028   display of my X220t would have the laptop's battery on the right
5029   hand side,
5030 - enables touch screen,
5031 - properly rotates the stylus pen and touch screen pointers, and
5032 - toggles between RGB and Vertical BGR sub-pixel order.
5033
5034 #+begin_src bash
5035 case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
5036     0)  # Screen is not rotated, we should rotate it right (90°)
5037            xrandr -o 3
5038            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
5039            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
5040            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
5041            xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
5042            ;;
5043     1)  # Currently top is rotated right, we should set it normal (0°)
5044           xrandr -o 0
5045           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
5046           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
5047           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
5048           xfconf-query -c xsettings -p /Xft/RGBA -s rgb
5049           ;;
5050     *)
5051            echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
5052            exit 1
5053            ;;
5054 esac
5055 #+end_src
5056
5057 ** unlock-def-gk.py
5058 :PROPERTIES:
5059 :header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
5060 :END:
5061
5062 #+begin_src python
5063 import gnomekeyring as gk
5064 # list_item_ids_sync('login')[0] == 1L
5065 gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
5066 #+end_src
5067
5068 ** volume-info
5069 :PROPERTIES:
5070 :header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh"
5071 :END:
5072
5073 #+begin_src sh
5074 cur_vol=$(pamixer --get-volume)
5075
5076 if [ $(pamixer --get-mute) = true ]; then
5077   printf 'mt \n' "$cur_vol"
5078 else
5079   printf '%02d \n' "$cur_vol"
5080 fi
5081 #+end_src
5082
5083 ** wp
5084
5085 My little wallpaper changer script.
5086
5087 *** wp
5088 :PROPERTIES:
5089 :header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
5090 :END:
5091
5092 #+begin_src bash :tangle no
5093 export DISPLAY=:0
5094
5095 case "$1" in
5096   "day")
5097     feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5098     ;;
5099   "night")
5100     feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5101     ;;
5102   *)
5103     echo $"Usage: $0 {day|night}"
5104     exit 1
5105 esac
5106 #+end_src
5107
5108 *** wp-auto
5109 :PROPERTIES:
5110 :header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
5111 :END:
5112
5113 #+begin_src bash :tangle no
5114 SED=$(which sed)
5115 ROFI=$(which rofi)
5116
5117 export DISPLAY=:0
5118 HOUR=$(date +%H)
5119
5120 if [ -z "${SED}" ]
5121 then
5122     echo "Did not find 'sed', script cannot continue."
5123     exit 1
5124 fi
5125 if [ -z "${ROFI}" ]
5126 then
5127     echo "Did not find rofi, there is no point to continue."
5128     exit 1
5129 fi
5130
5131 ###
5132 # Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
5133 # Repeated calls should leave the config clean-ish
5134 ###
5135 function set_theme()
5136 {
5137     CDIR="${HOME}/.config/rofi/"
5138     if [ ! -d "${CDIR}" ]
5139     then
5140         mkdir -p ${CDIR}
5141     fi
5142     if [ -f "${CDIR}/config" ]
5143     then
5144         ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
5145     fi
5146     echo "rofi.theme: ${1}" >> "${CDIR}/config"
5147
5148 }
5149
5150 if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
5151     then
5152         feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5153         xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
5154         set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
5155     else
5156         feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5157         xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
5158         set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
5159 fi
5160 #+end_src
5161
5162 *** wp.service
5163 :PROPERTIES:
5164 :header-args+: :tangle ~/.config/systemd/user/wp.service
5165 :END:
5166
5167 #+begin_src conf :tangle no
5168 [Unit]
5169 Description=wallpaper service
5170
5171 [Service]
5172 Type=oneshot
5173 ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
5174 #+end_src
5175
5176 *** wp.timer
5177 :PROPERTIES:
5178 :header-args+: :tangle ~/.config/systemd/user/wp.timer
5179 :END:
5180
5181 #+begin_src conf :tangle no
5182 [Unit]
5183 [Unit]
5184 Description=wallpaper timer
5185
5186 [Timer]
5187 OnCalendar=07,21:00
5188 Unit=wp.service
5189 Persistent=true
5190
5191 [Install]
5192 WantedBy=timers.target
5193 #+end_src
5194
5195 ** zathura-sync.sh
5196 :PROPERTIES:
5197 :header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
5198 :END:
5199
5200 #+begin_src sh
5201 pos="$1"
5202 pdffile="$2"
5203 zathura --synctex-forward "$pos" "$pdffile" || \
5204     (
5205     zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
5206     sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
5207 #+end_src
5208 ** Fun :)
5209
5210 *** eat-em
5211 :PROPERTIES:
5212 :header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
5213 :END:
5214
5215 #+begin_src sh
5216 # Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5217 # [ESC] character in original post removed here.
5218
5219 # ANSI Color -- use these variables to easily have different color
5220 #    and format output. Make sure to output the reset sequence after
5221 #    colors (f = foreground, b = background), and use the 'off'
5222 #    feature for anything you turn on.
5223
5224 initializeANSI()
5225 {
5226  esc="$(echo -en '\e')"
5227
5228   blackf="${esc}[30m";   redf="${esc}[31m";    greenf="${esc}[32m"
5229   yellowf="${esc}[33m"   bluef="${esc}[34m";   purplef="${esc}[35m"
5230   cyanf="${esc}[36m";    whitef="${esc}[37m"
5231
5232   blackb="${esc}[40m";   redb="${esc}[41m";    greenb="${esc}[42m"
5233   yellowb="${esc}[43m"   blueb="${esc}[44m";   purpleb="${esc}[45m"
5234   cyanb="${esc}[46m";    whiteb="${esc}[47m"
5235
5236   boldon="${esc}[1m";    boldoff="${esc}[22m"
5237   italicson="${esc}[3m"; italicsoff="${esc}[23m"
5238   ulon="${esc}[4m";      uloff="${esc}[24m"
5239   invon="${esc}[7m";     invoff="${esc}[27m"
5240
5241   reset="${esc}[0m"
5242 }
5243
5244 # note in this first use that switching colors doesn't require a reset
5245 # first - the new color overrides the old one.
5246
5247 #clear
5248
5249 initializeANSI
5250
5251 cat << EOF
5252
5253  ${yellowf}  ▄███████▄${reset}   ${redf}  ▄██████▄${reset}    ${greenf}  ▄██████▄${reset}    ${bluef}  ▄██████▄${reset}    ${purplef}  ▄██████▄${reset}    ${cyanf}  ▄██████▄${reset}
5254  ${yellowf}▄█████████▀▀${reset}  ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset}  ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset}  ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset}  ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset}  ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5255  ${yellowf}███████▀${reset}      ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset}  ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset}  ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset}  ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset}  ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5256  ${yellowf}███████▄${reset}      ${redf}████████████${reset}  ${greenf}████████████${reset}  ${bluef}████████████${reset}  ${purplef}████████████${reset}  ${cyanf}████████████${reset}
5257  ${yellowf}▀█████████▄▄${reset}  ${redf}██▀██▀▀██▀██${reset}  ${greenf}██▀██▀▀██▀██${reset}  ${bluef}██▀██▀▀██▀██${reset}  ${purplef}██▀██▀▀██▀██${reset}  ${cyanf}██▀██▀▀██▀██${reset}
5258  ${yellowf}  ▀███████▀${reset}   ${redf}▀   ▀  ▀   ▀${reset}  ${greenf}▀   ▀  ▀   ▀${reset}  ${bluef}▀   ▀  ▀   ▀${reset}  ${purplef}▀   ▀  ▀   ▀${reset}  ${cyanf}▀   ▀  ▀   ▀${reset}
5259
5260  ${boldon}${yellowf}  ▄███████▄   ${redf}  ▄██████▄    ${greenf}  ▄██████▄    ${bluef}  ▄██████▄    ${purplef}  ▄██████▄    ${cyanf}  ▄██████▄${reset}
5261  ${boldon}${yellowf}▄█████████▀▀  ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄  ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄  ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄  ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄  ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5262  ${boldon}${yellowf}███████▀      ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███  ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███  ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███  ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███  ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5263  ${boldon}${yellowf}███████▄      ${redf}████████████  ${greenf}████████████  ${bluef}████████████  ${purplef}████████████  ${cyanf}████████████${reset}
5264  ${boldon}${yellowf}▀█████████▄▄  ${redf}██▀██▀▀██▀██  ${greenf}██▀██▀▀██▀██  ${bluef}██▀██▀▀██▀██  ${purplef}██▀██▀▀██▀██  ${cyanf}██▀██▀▀██▀██${reset}
5265  ${boldon}${yellowf}  ▀███████▀   ${redf}▀   ▀  ▀   ▀  ${greenf}▀   ▀  ▀   ▀  ${bluef}▀   ▀  ▀   ▀  ${purplef}▀   ▀  ▀   ▀  ${cyanf}▀   ▀  ▀   ▀${reset}
5266
5267 EOF
5268 #+end_src
5269
5270 *** invade-em
5271 :PROPERTIES:
5272 :header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
5273 :END:
5274
5275 #+begin_src bash
5276 #
5277 # ANSI color scheme script featuring Space Invaders
5278 #
5279 # Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5280 # Modified by lolilolicon
5281 #
5282
5283 f=3 b=4
5284 for j in f b; do
5285   for i in {0..7}; do
5286     printf -v $j$i %b "\e[${!j}${i}m"
5287   done
5288 done
5289 bld=$'\e[1m'
5290 rst=$'\e[0m'
5291
5292 cat << EOF
5293
5294  $f1  ▀▄   ▄▀     $f2 ▄▄▄████▄▄▄    $f3  ▄██▄     $f4  ▀▄   ▄▀     $f5 ▄▄▄████▄▄▄    $f6  ▄██▄  $rst
5295  $f1 ▄█▀███▀█▄    $f2███▀▀██▀▀███   $f3▄█▀██▀█▄   $f4 ▄█▀███▀█▄    $f5███▀▀██▀▀███   $f6▄█▀██▀█▄$rst
5296  $f1█▀███████▀█   $f2▀▀███▀▀███▀▀   $f3▀█▀██▀█▀   $f4█▀███████▀█   $f5▀▀███▀▀███▀▀   $f6▀█▀██▀█▀$rst
5297  $f1▀ ▀▄▄ ▄▄▀ ▀   $f2 ▀█▄ ▀▀ ▄█▀    $f3▀▄    ▄▀   $f4▀ ▀▄▄ ▄▄▀ ▀   $f5 ▀█▄ ▀▀ ▄█▀    $f6▀▄    ▄▀$rst
5298
5299  $bld$f1▄ ▀▄   ▄▀ ▄   $f2 ▄▄▄████▄▄▄    $f3  ▄██▄     $f4▄ ▀▄   ▄▀ ▄   $f5 ▄▄▄████▄▄▄    $f6  ▄██▄  $rst
5300  $bld$f1█▄█▀███▀█▄█   $f2███▀▀██▀▀███   $f3▄█▀██▀█▄   $f4█▄█▀███▀█▄█   $f5███▀▀██▀▀███   $f6▄█▀██▀█▄$rst
5301  $bld$f1▀█████████▀   $f2▀▀▀██▀▀██▀▀▀   $f3▀▀█▀▀█▀▀   $f4▀█████████▀   $f5▀▀▀██▀▀██▀▀▀   $f6▀▀█▀▀█▀▀$rst
5302  $bld$f1 ▄▀     ▀▄    $f2▄▄▀▀ ▀▀ ▀▀▄▄   $f3▄▀▄▀▀▄▀▄   $f4 ▄▀     ▀▄    $f5▄▄▀▀ ▀▀ ▀▀▄▄   $f6▄▀▄▀▀▄▀▄$rst
5303
5304
5305                                      $f7▌$rst
5306
5307                                    $f7▌$rst
5308
5309                               $f7    ▄█▄    $rst
5310                               $f7▄█████████▄$rst
5311                               $f7▀▀▀▀▀▀▀▀▀▀▀$rst
5312
5313 EOF
5314 #+end_src