git.shemshak.org - ~bandali/configs/blob - rc.org

   1 #+title: rc.org
   2 #+property: header-args :comments link :mkdirp yes :results silent
   3
   4 * About
   5
   6 This org file contains the configuration files of pretty much every
   7 program I use. The files are tangled (i.e. exported, or derived) from
   8 this file using =org-babel=.
   9
  10 Note: This file is best viewed inside Emacs with org mode.
  11
  12 * Configs
  13
  14 This section contains the configuration files (dotfiles) of various
  15 programs I use.
  16
  17 ** bspwm
  18
  19 *** bspwmrc
  20 :PROPERTIES:
  21 :header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
  22 :END:
  23
  24 #+begin_src sh :tangle no
  25 sxhkd &
  26 sh ~/.fehbg &
  27 xfce4-panel -d &
  28 compton &
  29 sleep 0.5 && pasystray --notify=all &
  30
  31 bspc monitor -d I II III IV V VI VII VIII IX X
  32 #bspc monitor eDP-1 -d I II III IV V
  33 #bspc monitor HDMI-1 -d VI VII VIII IX X
  34
  35 #bspc config border_width         2
  36 #bspc config window_gap           8
  37 bspc config window_gap           0
  38
  39 bspc config bottom_padding 26
  40
  41 bspc config split_ratio          0.52
  42 bspc config borderless_monocle   true
  43 bspc config gapless_monocle      true
  44 bspc config click_to_focus       button1
  45 bspc config directional_focus_tightness low
  46
  47 #bspc rule -a Firefox desktop='^1' follow=on
  48 bspc rule -a Nightly desktop='^1' follow=on
  49 bspc rule -a Emacs desktop='^2' state=tiled follow=on
  50 #bspc rule -a Chromium desktop='^4' follow=on
  51 bspc rule -a URxvt state=floating
  52 bspc rule -a URxvt:tiled state=tiled
  53 bspc rule -a Connman-gtk state=floating
  54 bspc rule -a Xfce4-panel state=floating
  55 bspc rule -a TelegramDesktop state=floating
  56 bspc rule -a Ec state=floating
  57 bspc rule -a Pavucontrol state=floating
  58 bspc rule -a Eog state=floating
  59 bspc rule -a Seahorse state=floating
  60 bspc rule -a mpv state=floating
  61 bspc rule -a Evince state=floating
  62 bspc rule -a Meld state=floating
  63 bspc rule -a Autokey-gtk state=floating
  64 bspc rule -a Mousepad state=floating
  65 bspc rule -a Wrapper-1.0 state=floating
  66 bspc rule -a File-roller state=floating
  67 bspc rule -a Gnome-disks state=floating
  68 bspc rule -a Termite state=floating
  69 bspc rule -a Termite:tiled state=tiled
  70 bspc rule -a Thunderbird:Calendar state=floating
  71 bspc rule -a Audacity state=floating
  72 bspc rule -a Proof state=floating # pvs x-show-proof
  73 bspc rule -a Nm-connection-editor state=floating
  74 bspc rule -a Wire state=floating
  75 bspc rule -a discord state=floating
  76 bspc rule -a X2goclient state=floating
  77 bspc rule -a SimpleScreenRecorder state=floating
  78 bspc rule -a Gimp state=floating
  79 bspc rule -a Wrapper-2.0 state=floating
  80 bspc rule -a Zathura state=tiled
  81 #+end_src
  82
  83 *** sxhkdrc
  84 :PROPERTIES:
  85 :header-args+: :tangle ~/.config/sxhkd/sxhkdrc
  86 :END:
  87
  88 #+begin_src conf :tangle no
  89 #
  90 # wm independent hotkeys
  91 #
  92
  93 # terminal emulator
  94 super + {_,shift} + Return
  95         urxvt{_, -name tiled}
  96
  97 #super + {_,shift} + Return
  98 #       termite{_, --name=tiled}
  99
 100 # program launcher
 101 super + space
 102         rofi -show run -display-run '> ' -display-window ' 🗔 '
 103
 104 super + alt + space
 105         xfce4-popup-whiskermenu
 106
 107 # window finder
 108 super + backslash
 109         rofi -show window  -display-run '> ' -display-window ' 🗔 '
 110
 111 # password manager
 112 alt + space
 113         rofi-pass
 114
 115 # firefox
 116 #super + r
 117 #       firefox
 118
 119 # chromium
 120 #super + c
 121 #       chromium -incognito
 122
 123 # emacs
 124 super + e
 125         emacs
 126
 127 # make sxhkd reload its configuration files:
 128 super + Escape
 129         pkill -USR1 -x sxhkd
 130
 131 # volume {up,down}
 132 XF86Audio{Raise,Lower}Volume
 133         pamixer --allow-boost --{in,de}crease 5
 134
 135 # mute
 136 XF86AudioMute
 137         pamixer --toggle-mute
 138
 139 XF86AudioMicMute
 140         pactl set-source-mute 1 toggle
 141
 142 # playback control
 143 XF86Audio{Play,Prev,Next}
 144         mpc {toggle,prev,next}
 145
 146 # lock the screen
 147 super + shift + q
 148         light-locker-command -l
 149
 150 # Toggle keyboard layout
 151 super + F7
 152         toggle-layout
 153
 154 # Toggle Xfce presentation mode
 155 XF86LaunchB
 156         toggle-presentation-mode
 157
 158 # monitor brightness
 159 XF86MonBrightness{Up,Down}
 160         light -{A,U} 5
 161
 162 super + apostrophe
 163         rofi-light
 164
 165 # keyboard brightness
 166 #XF86KbdBrightness{Up,Down}
 167 #       kbdlight {up,down}
 168
 169 XF86RotateWindows
 170         toggle-tablet
 171
 172 #
 173 # bspwm hotkeys
 174 #
 175
 176 # quit bspwm normally
 177 super + alt + Escape
 178         bspc quit
 179
 180 # close and kill
 181 super + {w,q}
 182         bspc node -{c,k}
 183
 184 # alternate between the tiled and monocle layout
 185 super + m
 186         bspc desktop -l next
 187
 188 # send the newest marked node to the newest preselected node
 189 super + y
 190         bspc node newest.marked.local -n newest.!automatic.local
 191
 192 # swap the current node and the biggest node
 193 super + g
 194         bspc node -s biggest
 195
 196 #
 197 # state/flags
 198 #
 199
 200 # set the window state
 201 super + {t,shift + t,s,f}
 202         bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
 203
 204 # set the node flags
 205 super + ctrl + {m,x,y,z}
 206         bspc node -g {marked,locked,sticky,private}
 207
 208 #
 209 # focus/swap
 210 #
 211
 212 # focus the node in the given direction
 213 super + {_,shift + }{h,j,k,l}
 214         bspc node -{f,s} {west,south,north,east}
 215
 216 # focus the node for the given path jump
 217 super + {p,b,comma,period}
 218         bspc node -f @{parent,brother,first,second}
 219
 220 # focus the next/previous node in the current desktop
 221 super + {_,shift + }c
 222         bspc node -f {next,prev}.local
 223
 224 # focus the next/previous desktop in the current monitor
 225 super + bracket{left,right}
 226         bspc desktop -f {prev,next}.local
 227
 228 # send to next/prev desktop
 229 super + shift + bracket{left,right}
 230         bspc node -d {prev,next} --follow
 231
 232 # focus the last node/desktop
 233 super + {grave,Tab}
 234         bspc {node,desktop} -f last
 235
 236 # focus the older or newer node in the focus history
 237 super + {o,i}
 238         bspc wm -h off; \
 239         bspc node {older,newer} -f; \
 240         bspc wm -h on
 241
 242 # focus or send to the given desktop
 243 super + {_,shift + }{1-9,0}
 244         bspc {desktop -f,node -d} '^{1-9,10}'
 245
 246 #
 247 # preselect
 248 #
 249
 250 # preselect the direction
 251 super + ctrl + {h,j,k,l}
 252         bspc node -p {west,south,north,east}
 253
 254 # preselect the ratio
 255 super + ctrl + {1-9}
 256         bspc node -o 0.{1-9}
 257
 258 # cancel the preselection for the focused node
 259 super + ctrl + space
 260         bspc node -p cancel
 261
 262 # cancel the preselection for the focused desktop
 263 super + ctrl + shift + space
 264         bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
 265
 266 #
 267 # move/resize
 268 #
 269
 270 # expand a window by moving one of its side outward
 271 super + alt + {h,j,k,l}
 272         bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
 273
 274 # contract a window by moving one of its side inward
 275 super + alt + shift + {h,j,k,l}
 276         bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
 277
 278 # move a floating window
 279 super + {Left,Down,Up,Right}
 280         bspc node -v {-20 0,0 20,0 -20,20 0}
 281
 282 #alt + bracket{left,right}
 283 #       xdotool key --clearmodifiers ctrl+Page_{Up,Down}
 284 #+end_src
 285
 286 ** compton
 287 :PROPERTIES:
 288 :header-args+: :tangle ~/.config/compton.conf
 289 :END:
 290
 291 #+begin_src conf :tangle no
 292 # Shadow
 293 shadow = false;                 # Enabled client-side shadows on windows.
 294 no-dock-shadow = true;          # Avoid drawing shadows on dock/panel windows.
 295 no-dnd-shadow = true;           # Don't draw shadows on DND windows.
 296 clear-shadow = true;            # Zero the part of the shadow's mask behind the
 297                                 # window. Fix some weirdness with ARGB windows.
 298 shadow-radius = 5;              # The blur radius for shadows. (default 12)
 299 shadow-offset-x = -5;           # The left offset for shadows. (default -15)
 300 shadow-offset-y = -5;           # The top offset for shadows. (default -15)
 301 # shadow-opacity = 0.7;         # The translucency for shadows. (default .75)
 302 # shadow-red = 0.0;             # Red color value of shadow. (0.0 - 1.0, defaults to 0)
 303 # shadow-green = 0.0;           # Green color value of shadow. (0.0 - 1.0, defaults to 0)
 304 # shadow-blue = 0.0;            # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
 305 shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ];    # Exclude conditions for shadows.
 306 # shadow-exclude = "n:e:Notification";
 307 #shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
 308 shadow-ignore-shaped = true;    # Avoid drawing shadow on all shaped windows
 309                                 # (see also: --detect-rounded-corners)
 310
 311 # Opacity
 312 menu-opacity = 1.0;                     # The opacity for menus. (default 1.0)
 313 #inactive-opacity = 0.9;                        # Default opacity of inactive windows. (0.0 - 1.0)
 314 # active-opacity = 0.8;                 # Default opacity for active windows. (0.0 - 1.0)
 315 frame-opacity = 1.0;                    # Opacity of window titlebars and borders. (0.1 - 1.0)
 316 # inactive-opacity-override = true;     # Let inactive opacity set by 'inactive-opacity' overrides
 317                                         # value of _NET_WM_OPACITY. Bad choice.
 318 alpha-step = 0.06;                      # XRender backend: Step size for alpha pictures. Increasing
 319                                         # it may result in less X resource usage,
 320                                         # Yet fading may look bad.
 321 #inactive-dim = 0.5;                    # Dim inactive windows. (0.0 - 1.0)
 322 #inactive-dim-fixed = true;             # Do not let dimness adjust based on window opacity.
 323 # blur-background = true;               # Blur background of transparent windows.
 324                                         # Bad performance with X Render backend.
 325                                         # GLX backend is preferred.
 326 # blur-background-frame = true;         # Blur background of opaque windows with transparent
 327                                         # frames as well.
 328 blur-background-fixed = true;           # Do not let blur radius adjust based on window opacity.
 329 blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
 330                                         # Exclude conditions for background blur.
 331
 332 # Fading
 333 fading = false;                 # Fade windows during opacity changes.
 334 fade-delta = 3;         # The time between steps in a fade in milliseconds. (default 10).
 335 fade-in-step = 0.03;            # Opacity change between steps while fading in. (default 0.028).
 336 fade-out-step = 0.03;           # Opacity change between steps while fading out. (default 0.03).
 337 # no-fading-openclose = true;   # Avoid fade windows in/out when opening/closing.
 338 fade-exclude = [ ];             # Exclude conditions for fading.
 339
 340 # Other
 341 backend = "glx"                 # Backend to use: "xrender" or "glx". GLX backend is typically
 342                                 # much faster but depends on a sane driver.
 343 mark-wmwin-focused = true;      # Try to detect WM windows and mark them as active.
 344 mark-ovredir-focused = true;    # Mark all non-WM but override-redirect windows active (e.g. menus).
 345 use-ewmh-active-win = true;     # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
 346                                 # instead of using FocusIn/Out events. Usually more reliable but
 347                                 # depends on a EWMH-compliant WM.
 348 detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
 349 detect-client-opacity = true;   # Detect _NET_WM_OPACITY on client windows, useful for window
 350                                 # managers not passing _NET_WM_OPACITY of client windows to frame
 351                                 # windows.
 352 refresh-rate = 0;               # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
 353 vsync = "drm";                  # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
 354                                 # See man page for more details.
 355 dbe = false;                    # Enable DBE painting mode. Rarely needed.
 356 paint-on-overlay = true;        # Painting on X Composite overlay window. Recommended.
 357 sw-opti = false;                # Limit compton to repaint at most once every 1 / refresh_rate.
 358                                 # Incompatible with certain VSync methods.
 359 unredir-if-possible = false;    # Unredirect all windows if a full-screen opaque window is
 360                                 # detected, to maximize performance for full-screen windows.
 361 focus-exclude = [ ];            # A list of conditions of windows that should always be considered
 362                                 # focused.
 363 detect-transient = true;        # Use WM_TRANSIENT_FOR to group windows, and consider windows in
 364                                 # the same group focused at the same time.
 365 detect-client-leader = true;    # Use WM_CLIENT_LEADER to group windows.
 366 invert-color-include = [ ];     # Conditions for windows to be painted with inverted color.
 367
 368 # GLX backend                   # GLX backend fine-tune options. See man page for more info.
 369 glx-no-stencil = true;          # Recommended.
 370 glx-copy-from-front = false;    # Useful with --glx-swap-method,
 371 # glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
 372 # glx-no-rebind-pixmap = true;  # Recommended if it works.
 373 glx-no-rebind-pixmap = true;    # Recommended if it works.
 374 #glx-swap-method = "4"; # See man page.
 375 glx-swap-method = "4";  # See man page.
 376
 377 # Window type settings
 378 wintypes:
 379 {
 380   tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
 381   menu = { shadow = false; };
 382   dropdown_menu = { shadow = false; };
 383   popup_menu =  { shadow = false; };
 384   utility =  { shadow = false; };
 385   # fade: Fade the particular type of windows.
 386   # shadow: Give those windows shadow
 387   # opacity: Default opacity for the type of windows.
 388   # focus: Whether to always consider windows of this type focused.
 389 };
 390 #+end_src
 391
 392 ** Dunst
 393 :PROPERTIES:
 394 :header-args+: :tangle ~/.config/dunst/dunstrc
 395 :END:
 396
 397 #+begin_src conf
 398 [global]
 399 #font = Ubuntu Mono 10.5
 400 font = Inconsolata 11
 401
 402 # Path to default icons.
 403 icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
 404
 405 icon_position = left
 406 # <b>bold</b>
 407 # <i>italic</i>
 408 # <s>strikethrough<s/>
 409 # <u>underline</u>
 410 markup = full
 411 # The format of the message. Possible variables are:
 412 #   %a  appname
 413 #   %s  summary
 414 #   %b  body
 415 #   %i  iconname (including its path)
 416 #   %I  iconname (without its path)
 417 #   %p  progress value if set ([  0%] to [100%]) or nothing
 418 # Markup is allowed
 419 format = "<b>%s</b>\n%b"
 420 # Sort messages by urgency
 421 sort = yes
 422 # Show how many messages are currently hidden (because of geometry)
 423 indicate_hiddenl= no
 424 # Alignment of message text.
 425 # Possible values are "left", "center" and "right"
 426 alignment = center
 427 # The frequency with wich text that is longer than the notification
 428 # window allows bounces back and forth.
 429 # This option conflicts with 'word_wrap'.
 430 # Set to 0 to disable
 431 bounce_freq = 3
 432 # show age of message if message is older than show_age_threshold seconds.
 433 # set to -1 to disable
 434 show_age_threshold = -1
 435 # split notifications into multiple lines if they don't fit into geometry
 436 word_wrap = yes
 437 # ignore newlines '\n' in notifications
 438 ignore_newline = no
 439 # The geometry of the message window.
 440 # geometry [{width}]x{height}][+/-{x}+/-{y}]
 441 # The height is measured in number of notifications everything else in pixels. If the width
 442 # is omitted but the height is given ("-geometry x2"), the message window
 443 # expands over the whole screen (dmenu-like). If width is 0,
 444 # the window expands to the longest message displayed.
 445 # A positive x is measured from the left, a negative from the
 446 # right side of the screen.  Y is measured from the top and down respectevly.
 447 # The width can be negative. In this case the actual width is the
 448 # screen width minus the width defined in within the geometry option.
 449 #geometry = "410x12-12+12"
 450 #geometry = "0x0-30-30"
 451 geometry = "260x12-30-30"
 452 # The transparency of the window. range: [0; 100]
 453 # This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
 454 transparency = 0
 455 # Don't remove messages, if the user is idle (no mouse or keyboard input)
 456 # for longer than idle_threshold seconds.
 457 # Set to 0 to disable.
 458 idle_threshold = 120
 459 # Which monitor should the notifications be displayed on.
 460 monitor = 0
 461 # Display notification on focused monitor. Possible modes are:
 462 # mouse: follow mouse pointer
 463 # keyboard: follow window with keyboard focus
 464 # none: don't follow anything
 465 #
 466 # "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
 467 # This should be the case for almost all modern windowmanagers.
 468 #
 469 # If this option is set to mouse or keyboard, the monitor option will be
 470 # ignored.
 471 follow = keyboard
 472 # should a notification popped up from history be sticky or
 473 # timeout as if it would normally do.
 474 sticky_history = yes
 475 # The height of a single line. If the height is smaller than the font height,
 476 # it will get raised to the font height.
 477 # This adds empty space above and under the text.
 478 line_height = 0
 479
 480 show_indicators = yes
 481
 482 # Draw a line of 'separatpr_height' pixel height between two notifications.
 483 # Set to 0 to disable
 484 separator_height = 3
 485 # padding between text and separator
 486 padding = 8
 487 # horizontal padding
 488 horizontal_padding = 8
 489 # Define a color for the separator.
 490 # possible values are:
 491 #  * auto: dunst tries to find a color fitting to the background
 492 #  * foreground: use the same color as the foreground
 493 #  * frame: use the same color as the frame.
 494 #  * anything else will be interpreted as a X color
 495 separator_color = foreground
 496 # print a notification on startup
 497 # This is mainly for error detection, since dbus (re-)starts dunst
 498 # automatically after a crash.
 499 startup_notification = false
 500 # dmenu path
 501 #dmenu = /usr/bin/dmenu -p dunst:
 502 dmenu = /usr/bin/rofi -dmenu -p dunst:
 503 # browser for opening urls in context menu
 504 browser = /usr/bin/firefox -new-tab
 505 [frame]
 506 width = 0
 507 color = "#377222"
 508 [shortcuts]
 509 # shortcuts are specified as [modifier+][modifier+]...key
 510 # available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
 511 # and 'mod4' (windows-key)
 512 # xev might be helpful to find names for keys
 513 # close notification
 514 close = ctrl+space
 515 # close all notifications
 516 close_all = ctrl+shift+space
 517 # redisplay last message(s)
 518 # On the US keyboard layout 'grave' is normally above TAB and left of '1'.
 519 history = ctrl+shift+h
 520 # context menu
 521 context = ctrl+shift+period
 522 [urgency_low]
 523 # IMPORTANT: colors have to be defined in quotation marks.
 524 # Otherwise the '#' and following  would be interpreted as a comment.
 525 background = "#1d2a30"
 526 foreground = "#71c2af"
 527 timeout = 3
 528 [urgency_normal]
 529 background = "#1d2a30"
 530 foreground = "#71c2af"
 531 timeout = 0
 532 [urgency_critical]
 533 background = "#1d2a30"
 534 foreground = "#ff9982"
 535 timeout = 0
 536
 537 # Every section that isn't one of the above is interpreted as a rules
 538 # to override settings for certain messages.
 539 # Messages can be matched by 'appname', 'summary', 'body' or 'icon'
 540 # and you can override the 'timeout', 'urgency', 'foreground', 'background'
 541 # and 'format'.
 542 # Shell-like globbing will get expanded.
 543 #
 544 # SCRIPTING
 545 # you can specify a script that gets run when the rule matches by setting
 546 # the 'script' option.
 547 # The script will be called as follows:
 548 # script appname summary body icon urgency
 549 # where urgency can be "LOW", "NORMAL" or "CRITICAL".
 550 #
 551 # NOTE: if you don't want a notification to be displayed, set the format to ""
 552 # NOTE: It might be helpful to run dunst -print in a terminal in order to find
 553 # fitting options for rules.
 554 #[espeak]
 555 #    summary = "*"
 556 #    script = dunst_espeak.sh
 557 #[script-test]
 558 #    summary = "*script*"
 559 #    script = dunst_test.sh
 560 #[ignore]
 561 ## This notification will not be displayed
 562 #    summary = "foobar"
 563 #    format = ""
 564 #[signed_on]
 565 #    appname = Pidgin
 566 #    summary = "*signed on*"
 567 #    urgency = low
 568 #
 569 #[signed_off]
 570 #    appname = Pidgin
 571 #    summary = *signed off*
 572 #    urgency = low
 573 #
 574 #[says]
 575 #    appname = Pidgin
 576 #    summary = *says*
 577 #    urgency = critical
 578 #
 579 #[twitter]
 580 #    appname = Pidgin
 581 #    summary = *twitter.com*
 582 #    urgency = normal
 583 #
 584 [xfpm-backlight]
 585     summary = *Brightness*
 586     urgency = low
 587 #+end_src
 588
 589 ** Fontconfig
 590 :PROPERTIES:
 591 :header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
 592 :END:
 593
 594 #+begin_src xml
 595 <?xml version="1.0"?>
 596 <!DOCTYPE fontconfig SYSTEM "fonts.dtd">
 597 <fontconfig>
 598  <match target="font">
 599   <edit mode="assign" name="rgba">
 600    <const>rgb</const>
 601   </edit>
 602  </match>
 603  <match target="font">
 604   <edit mode="assign" name="hinting">
 605    <bool>true</bool>
 606   </edit>
 607  </match>
 608  <match target="font">
 609   <edit mode="assign" name="hintstyle">
 610    <const>hintslight</const>
 611   </edit>
 612  </match>
 613  <match target="font">
 614   <edit mode="assign" name="antialias">
 615    <bool>true</bool>
 616   </edit>
 617  </match>
 618  <match target="font">
 619   <edit mode="assign" name="lcdfilter">
 620    <const>lcddefault</const>
 621   </edit>
 622  </match>
 623  <dir>~/.fonts</dir>
 624
 625  <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
 626  <alias binding="same">
 627   <family>Helvetica</family>
 628   <prefer>
 629    <family>Liberation Sans</family>
 630   </prefer>
 631 </alias>
 632 </fontconfig>
 633 #+end_src
 634
 635 ** getmail
 636
 637 *** getmailrc
 638 :PROPERTIES:
 639 :header-args+: :tangle ~/.getmail/getmailrc
 640 :END:
 641
 642 #+begin_src conf
 643 [retriever]
 644 type = SimplePOP3SSLRetriever
 645 server = fencepost.gnu.org
 646 username = aminb
 647 password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
 648 port = 995
 649 use_apop = True
 650
 651 [destination]
 652 type = Maildir
 653 path = ~/mail/gnu/Inbox/
 654
 655 [options]
 656 delete = True
 657 #+end_src
 658
 659 *** getmail.service
 660 :PROPERTIES:
 661 :header-args+: :tangle ~/.config/systemd/user/getmail.service
 662 :END:
 663
 664 #+begin_src conf :tangle no
 665 [Unit]
 666 Description=getmail service
 667
 668 [Service]
 669 Type=oneshot
 670 ExecStart=/usr/bin/getmail
 671 StandardOutput=syslog
 672 StandardError=syslog
 673 #+end_src
 674
 675 *** getmail.timer
 676 :PROPERTIES:
 677 :header-args+: :tangle ~/.config/systemd/user/getmail.timer
 678 :END:
 679
 680 #+begin_src conf :tangle no
 681 [Unit]
 682 Description=getmail timer
 683
 684 [Timer]
 685 OnCalendar=*:0/30
 686 Persistent=true
 687 Unit=getmail.service
 688
 689 [Install]
 690 WantedBy=timers.target
 691 #+end_src
 692
 693 ** Git
 694
 695 *** gitconfig
 696 :PROPERTIES:
 697 :header-args+: :tangle ~/.gitconfig
 698 :END:
 699
 700 **** user
 701 #+begin_src conf
 702 [user]
 703     name = Amin Bandali
 704     email = bandali@gnu.org
 705     signingkey = BE6273738E616D6D1B3A08E8A21A020248816103
 706 #+end_src
 707
 708 **** signing
 709 #+begin_src conf
 710 [commit]
 711     gpgsign = true
 712 # [format]
 713 #     signoff = true
 714 #+end_src
 715
 716 **** core
 717 #+begin_src conf
 718 [core]
 719     autocrlf = input  # CRLF -> LF on commit
 720     editor = emacsclient -t
 721     excludesfile = ~/.gitignore_global
 722     pager = "less"
 723 #+end_src
 724
 725 **** gpg
 726 #+begin_src conf
 727 [gpg]
 728     program = gpg2
 729 #+end_src
 730
 731 **** alias
 732 #+begin_src conf
 733 [alias]
 734     git = !exec git  # handle nested git calls, e.g. git git status
 735     aliases = config --get-regexp '^alias\\.'
 736     a = add
 737     s = status
 738     sl = status --long
 739     c = checkout
 740     cb = checkout -b
 741     b = branch
 742     r = rebase
 743     p = pull
 744     pr = pull --rebase
 745     ps = push
 746     psf = push --force
 747     nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f"
 748     nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f"
 749 #+end_src
 750
 751 **** color
 752 #+begin_src conf
 753 [color]
 754     ui = auto
 755 [color "status"]
 756     added = green bold
 757     changed = red bold
 758     untracked = red bold
 759 [color "branch"]
 760     current = green bold
 761     remote = magenta bold
 762 [color "diff"]
 763     new = green bold
 764     old = red bold
 765 #+end_src
 766
 767 **** status
 768 #+begin_src conf
 769 [status]
 770     # showUntrackedFiles = all
 771     short=true
 772     branch=true
 773 #+end_src
 774
 775 **** github
 776 #+begin_src conf
 777 [github]
 778         user = aminb
 779 #+end_src
 780
 781 **** send-email
 782 #+begin_src conf
 783 [sendemail]
 784         smtpuser = aminb
 785         smtpserver = fencepost.gnu.org
 786         smtpserverport = 587
 787         smtpencryption = tls
 788         annotate = yes
 789 #+end_src
 790
 791 *** gitignore
 792 :PROPERTIES:
 793 :header-args+: :tangle ~/.gitignore_global
 794 :END:
 795
 796 #+begin_src conf
 797 *.orig
 798 *.py[co]
 799 *.sublime-workspace
 800 *~
 801 .DS_Store
 802 *.elc
 803 *-autoloads.el
 804 #+end_src
 805
 806 ** GnuPG
 807 :PROPERTIES:
 808 :header-args+: :tangle ~/.gnupg/gpg-agent.conf
 809 :END:
 810
 811 #+begin_src conf
 812 default-cache-ttl 43200
 813 max-cache-ttl 43200
 814
 815 default-cache-ttl-ssh 10800
 816 max-cache-ttl-ssh 10800
 817
 818 # pinentry-program /usr/bin/pinentry-qt
 819 #+end_src
 820
 821 ** GTK
 822
 823 *** gtk-2.0
 824 :PROPERTIES:
 825 :header-args+: :tangle ~/.gtkrc-2.0
 826 :END:
 827
 828 #+begin_src conf
 829 gtk-theme-name="Greybird"
 830 gtk-icon-theme-name="Paper"
 831 gtk-font-name="Ubuntu 10"
 832 gtk-menu-images=0
 833 # gtk-key-theme-name = "Emacs"
 834 #+end_src
 835
 836 *** gtk-3.0
 837 :PROPERTIES:
 838 :header-args+: :tangle ~/.config/gtk-3.0/settings.ini
 839 :END:
 840
 841 #+begin_src conf :tangle no
 842 [Settings]
 843 gtk-icon-theme-name = Paper
 844 # gtk-theme-name = Adwaita
 845
 846 gtk-theme-name = Greybird
 847 # gtk-theme-name = Arc-Darker
 848 # gtk-theme-name = Numix-ArchBlue
 849
 850 gtk-font-name = Ubuntu 10
 851 # gtk-key-theme-name = Emacs
 852 #+end_src
 853
 854 ** [[https://github.com/Leinnan/i3gs][i3gs]]
 855 :PROPERTIES:
 856 :header-args+: :tangle ~/.config/i3gs/config
 857 :END:
 858
 859 #+begin_src conf :comments none :tangle no
 860 borders_width=0 0 2 0
 861 separator_width=10
 862
 863 #[mpd]
 864 #preset=MPD
 865 #title=<span weight='heavy' fgcolor='#7FDBFF'> </span>
 866 #borders_color=#7FDBFF
 867
 868 [ram]
 869 preset=RAM
 870 title=<span weight='heavy' fgcolor='#3D9970'> </span>
 871 borders_color=#3D9970
 872
 873 #[cpu]
 874 #preset=CPU
 875 #title=<span weight='heavy' fgcolor='#2ECC40'> </span>
 876 #borders_color=#2ECC40
 877
 878 #[hdd]
 879 #preset=HDD
 880 #title=<span weight='heavy' fgcolor='#01FF70'> </span>
 881 #borders_color=#01FF70
 882
 883 [volume]
 884 command=volume-info
 885 title=<span weight='heavy' fgcolor='#7FDBFF'></span>
 886 borders_color=#7FDBFF
 887
 888 [battery]
 889 preset=BAT
 890 command=battery-percentage-time
 891 title=<span weight='heavy' fgcolor='#39CCCC'> </span>
 892 borders_color=#39CCCC
 893
 894 [wifi]
 895 preset=WIFI
 896 title=<span weight='heavy' fgcolor='#01FF70'> </span>
 897 borders_color=#01FF70
 898
 899 [date]
 900 preset=DATE
 901 command=date '+%-I:%M, %a %b %d '
 902 title=<span weight='heavy' fgcolor='#FFDC00'> </span>
 903 borders_color=#FFDC00
 904 separator_width=0
 905 #+end_src
 906
 907 ** i3status
 908 :PROPERTIES:
 909 :header-args+: :tangle ~/.config/i3status/config
 910 :END:
 911
 912 #+begin_src conf :comments none
 913 # i3status configuration file.
 914 # see "man i3status" for documentation.
 915
 916 # It is important that this file is edited as UTF-8.
 917 # The following line should contain a sharp s:
 918 # ß
 919 # If the above line is not correctly displayed, fix your editor first!
 920
 921 general {
 922         colors = true
 923         interval = 5
 924         output_format = "i3bar"
 925 }
 926
 927 # order += "ipv6"
 928 order += "disk /"
 929 order += "disk /data"
 930 order += "wireless _first_"
 931 order += "ethernet _first_"
 932 order += "battery 0"
 933 order += "volume master"
 934 order += "load"
 935 order += "tztime local"
 936
 937 wireless _first_ {
 938         format_up = "W:%quality %essid %ip"
 939         format_down = "W: down"
 940 }
 941
 942 ethernet _first_ {
 943         # if you use %speed, i3status requires root privileges
 944         format_up = "E: %ip (%speed)"
 945         format_down = "E: down"
 946 }
 947
 948 battery 0 {
 949         format = "%status %percentage %remaining (%consumption)"
 950         path = "/sys/class/power_supply/BAT%d/uevent"
 951         low_threshold = "10"
 952         threshold_type = "percentage"
 953         last_full_capacity = true
 954         integer_battery_capacity = true
 955         hide_seconds = true
 956 }
 957
 958 tztime local {
 959         format = "%-I:%M%P %a %b %d"
 960 }
 961
 962 volume master {
 963         format = "♪ %volume"
 964         format_muted = "🔇 %volume"
 965         device = "pulse"
 966 }
 967
 968 load {
 969         format = "%1min"
 970 }
 971
 972 disk "/" {
 973         format = "/ %avail"
 974 }
 975
 976 disk "/data" {
 977         format = "/data %avail"
 978 }
 979 #+end_src
 980
 981 ** isync
 982
 983 *** mbsyncrc
 984 :PROPERTIES:
 985 :header-args+: :tangle ~/.mbsyncrc
 986 :END:
 987
 988 #+begin_src conf
 989 # Global defaults
 990 CopyArrivalDate yes
 991
 992 ######
 993 IMAPAccount amin
 994 Host nix.aminb.org
 995 User amin@aminb.org
 996 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
 997 SSLType IMAPS
 998
 999 IMAPStore amin-remote
1000 Account amin
1001
1002 MaildirStore amin-local
1003 Path ~/mail/amin/
1004 Inbox ~/mail/amin/Inbox
1005 SubFolders Verbatim
1006
1007 Channel amin
1008 Master :amin-remote:
1009 Slave :amin-local:
1010 Patterns * !dovecot*
1011 Create Both
1012 SyncState *
1013
1014 ######
1015 IMAPAccount uwaterloo
1016 Host connect.uwaterloo.ca
1017 User abandali
1018 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
1019 SSLType IMAPS
1020
1021 IMAPStore uwaterloo-remote
1022 Account uwaterloo
1023
1024 MaildirStore uwaterloo-local
1025 Path ~/mail/uwaterloo/
1026 Inbox ~/mail/uwaterloo/Inbox
1027 SubFolders Verbatim
1028
1029 Channel uwaterloo
1030 Master :uwaterloo-remote:
1031 Slave :uwaterloo-local:
1032 Patterns * !dovecot*
1033 Create Both
1034 SyncState *
1035 #+end_src
1036
1037 *** mbsync.service
1038 :PROPERTIES:
1039 :header-args+: :tangle ~/.config/systemd/user/mbsync.service
1040 :END:
1041
1042 #+begin_src conf :tangle no
1043 [Unit]
1044 Description=mbsync service
1045
1046 [Service]
1047 Type=oneshot
1048 ExecStart=/usr/bin/mbsync -Va
1049 StandardOutput=syslog
1050 StandardError=syslog
1051 #+end_src
1052
1053 *** mbsync.timer
1054 :PROPERTIES:
1055 :header-args+: :tangle ~/.config/systemd/user/mbsync.timer
1056 :END:
1057
1058 #+begin_src conf :tangle no
1059 [Unit]
1060 Description=mbsync timer
1061
1062 [Timer]
1063 OnCalendar=*:0/15
1064 Persistent=true
1065 Unit=mbsync.service
1066
1067 [Install]
1068 WantedBy=timers.target
1069 #+end_src
1070
1071 ** Latexmk
1072 :PROPERTIES:
1073 :header-args+: :tangle ~/.latexmkrc
1074 :END:
1075
1076 #+begin_src conf
1077 $pdf_previewer = "start zathura %O %S";
1078 $clean_ext = "aux out";
1079
1080 # $pdf_update_method = 4;
1081 # $pdf_update_command = "zathura %O %S";
1082
1083 # Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
1084 # by Ctrl+click in the PDF.
1085 # Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
1086 # editor.
1087 # $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
1088 #+end_src
1089
1090 ** libinput
1091
1092 Improve XPS 15 9560's touchpad experience.
1093
1094 # begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
1095 #+begin_src conf :tangle no
1096 Section "InputClass"
1097     Identifier "libinput touchpad catchall"
1098     Driver "libinput"
1099     MatchIsTouchpad "on"
1100     Option "ClickMethod" "clickfinger"
1101     Option "NaturalScrolling" "true"
1102     Option "Tapping" "on"
1103     Option "TappingButtonMap" "lrm"
1104 EndSection
1105 #+end_src
1106
1107 ** mpd
1108 :PROPERTIES:
1109 :header-args+: :tangle ~/.config/mpd/mpd.conf
1110 :END:
1111
1112 #+begin_src conf
1113 # An example configuration file for MPD.
1114 # Read the user manual for documentation: http://www.musicpd.org/doc/user/
1115
1116
1117 # Files and directories #######################################################
1118 #
1119 # This setting controls the top directory which MPD will search to discover the
1120 # available audio files and add them to the daemon's online database. This
1121 # setting defaults to the XDG directory, otherwise the music directory will be
1122 # be disabled and audio files will only be accepted over ipc socket (using
1123 # file:// protocol) or streaming files over an accepted protocol.
1124 #
1125 music_directory         "~/usr/music"
1126 #
1127 # This setting sets the MPD internal playlist directory. The purpose of this
1128 # directory is storage for playlists created by MPD. The server will use
1129 # playlist files not created by the server but only if they are in the MPD
1130 # format. This setting defaults to playlist saving being disabled.
1131 #
1132 playlist_directory              "~/.mpd/playlists"
1133 #
1134 # This setting sets the location of the MPD database. This file is used to
1135 # load the database at server start up and store the database while the
1136 # server is not up. This setting defaults to disabled which will allow
1137 # MPD to accept files over ipc socket (using file:// protocol) or streaming
1138 # files over an accepted protocol.
1139 #
1140 db_file                 "~/.mpd/database"
1141 #
1142 # These settings are the locations for the daemon log files for the daemon.
1143 # These logs are great for troubleshooting, depending on your log_level
1144 # settings.
1145 #
1146 # The special value "syslog" makes MPD use the local syslog daemon. This
1147 # setting defaults to logging to syslog, otherwise logging is disabled.
1148 #
1149 log_file                        "~/.mpd/log"
1150 #
1151 # This setting sets the location of the file which stores the process ID
1152 # for use of mpd --kill and some init scripts. This setting is disabled by
1153 # default and the pid file will not be stored.
1154 #
1155 pid_file                        "~/.mpd/pid"
1156 #
1157 # This setting sets the location of the file which contains information about
1158 # most variables to get MPD back into the same general shape it was in before
1159 # it was brought down. This setting is disabled by default and the server
1160 # state will be reset on server start up.
1161 #
1162 state_file                      "~/.mpd/state"
1163 #
1164 # The location of the sticker database.  This is a database which
1165 # manages dynamic information attached to songs.
1166 #
1167 sticker_file                    "~/.mpd/sticker.sql"
1168 #
1169 ###############################################################################
1170
1171
1172 # General music daemon options ################################################
1173 #
1174 # This setting specifies the user that MPD will run as. MPD should never run as
1175 # root and you may use this setting to make MPD change its user ID after
1176 # initialization. This setting is disabled by default and MPD is run as the
1177 # current user.
1178 #
1179 #user                           "nobody"
1180 #
1181 # This setting specifies the group that MPD will run as. If not specified
1182 # primary group of user specified with "user" setting will be used (if set).
1183 # This is useful if MPD needs to be a member of group such as "audio" to
1184 # have permission to use sound card.
1185 #
1186 #group                          "nogroup"
1187 #
1188 # This setting sets the address for the daemon to listen on. Careful attention
1189 # should be paid if this is assigned to anything other then the default, any.
1190 # This setting can deny access to control of the daemon. Not effective if
1191 # systemd socket activiation is in use.
1192 #
1193 # For network
1194 #bind_to_address                "any"
1195 #
1196 # And for Unix Socket
1197 #bind_to_address                "~/.mpd/socket"
1198 #
1199 # This setting is the TCP port that is desired for the daemon to get assigned
1200 # to.
1201 #
1202 #port                           "6600"
1203 #
1204 # This setting controls the type of information which is logged. Available
1205 # setting arguments are "default", "secure" or "verbose". The "verbose" setting
1206 # argument is recommended for troubleshooting, though can quickly stretch
1207 # available resources on limited hardware storage.
1208 #
1209 #log_level                      "default"
1210 #
1211 # If you have a problem with your MP3s ending abruptly it is recommended that
1212 # you set this argument to "no" to attempt to fix the problem. If this solves
1213 # the problem, it is highly recommended to fix the MP3 files with vbrfix
1214 # (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
1215 # point gapless MP3 playback can be enabled.
1216 #
1217 #gapless_mp3_playback                   "yes"
1218 #
1219 # Setting "restore_paused" to "yes" puts MPD into pause mode instead
1220 # of starting playback after startup.
1221 #
1222 #restore_paused "no"
1223 #
1224 # This setting enables MPD to create playlists in a format usable by other
1225 # music players.
1226 #
1227 #save_absolute_paths_in_playlists       "no"
1228 #
1229 # This setting defines a list of tag types that will be extracted during the
1230 # audio file discovery process. The complete list of possible values can be
1231 # found in the user manual.
1232 #metadata_to_use        "artist,album,title,track,name,genre,date,composer,performer,disc"
1233 #
1234 # This setting enables automatic update of MPD's database when files in
1235 # music_directory are changed.
1236 #
1237 #auto_update    "yes"
1238 #
1239 # Limit the depth of the directories being watched, 0 means only watch
1240 # the music directory itself.  There is no limit by default.
1241 #
1242 #auto_update_depth "3"
1243 #
1244 ###############################################################################
1245
1246
1247 # Symbolic link behavior ######################################################
1248 #
1249 # If this setting is set to "yes", MPD will discover audio files by following
1250 # symbolic links outside of the configured music_directory.
1251 #
1252 #follow_outside_symlinks        "yes"
1253 #
1254 # If this setting is set to "yes", MPD will discover audio files by following
1255 # symbolic links inside of the configured music_directory.
1256 #
1257 #follow_inside_symlinks         "yes"
1258 #
1259 ###############################################################################
1260
1261
1262 # Zeroconf / Avahi Service Discovery ##########################################
1263 #
1264 # If this setting is set to "yes", service information will be published with
1265 # Zeroconf / Avahi.
1266 #
1267 #zeroconf_enabled               "yes"
1268 #
1269 # The argument to this setting will be the Zeroconf / Avahi unique name for
1270 # this MPD server on the network.
1271 #
1272 #zeroconf_name                  "Music Player"
1273 #
1274 ###############################################################################
1275
1276
1277 # Permissions #################################################################
1278 #
1279 # If this setting is set, MPD will require password authorization. The password
1280 # setting can be specified multiple times for different password profiles.
1281 #
1282 #password                        "password@read,add,control,admin"
1283 #
1284 # This setting specifies the permissions a user has who has not yet logged in.
1285 #
1286 #default_permissions             "read,add,control,admin"
1287 #
1288 ###############################################################################
1289
1290
1291 # Database #######################################################################
1292 #
1293
1294 #database {
1295 #       plugin "proxy"
1296 #       host "other.mpd.host"
1297 #       port "6600"
1298 #}
1299
1300 # Input #######################################################################
1301 #
1302
1303 input {
1304         plugin "curl"
1305 #       proxy "proxy.isp.com:8080"
1306 #       proxy_user "user"
1307 #       proxy_password "password"
1308 }
1309
1310 #
1311 ###############################################################################
1312
1313 # Audio Output ################################################################
1314 #
1315
1316 audio_output {
1317     type    "pulse"
1318     name    "pulse audio"
1319 }
1320
1321 audio_output {
1322     type    "fifo"
1323     name    "my_fifo"
1324     path    "/tmp/mpd.fifo"
1325     format  "44100:16:2"
1326 }
1327
1328 # MPD supports various audio output types, as well as playing through multiple
1329 # audio outputs at the same time, through multiple audio_output settings
1330 # blocks. Setting this block is optional, though the server will only attempt
1331 # autodetection for one sound card.
1332 #
1333 # An example of an ALSA output:
1334 #
1335 #audio_output {
1336 #       type            "alsa"
1337 #       name            "My ALSA Device"
1338 ##      device          "hw:0,0"        # optional
1339 ##      mixer_type      "hardware"      # optional
1340 ##      mixer_device    "default"       # optional
1341 ##      mixer_control   "PCM"           # optional
1342 ##      mixer_index     "0"             # optional
1343 #}
1344 #
1345 # An example of an OSS output:
1346 #
1347 #audio_output {
1348 #       type            "oss"
1349 #       name            "My OSS Device"
1350 ##      device          "/dev/dsp"      # optional
1351 ##      mixer_type      "hardware"      # optional
1352 ##      mixer_device    "/dev/mixer"    # optional
1353 ##      mixer_control   "PCM"           # optional
1354 #}
1355 #
1356 # An example of a shout output (for streaming to Icecast):
1357 #
1358 #audio_output {
1359 #       type            "shout"
1360 #       encoder         "vorbis"                # optional
1361 #       name            "My Shout Stream"
1362 #       host            "localhost"
1363 #       port            "8000"
1364 #       mount           "/mpd.ogg"
1365 #       password        "hackme"
1366 #       quality         "5.0"
1367 #       bitrate         "128"
1368 #       format          "44100:16:1"
1369 ##      protocol        "icecast2"              # optional
1370 ##      user            "source"                # optional
1371 ##      description     "My Stream Description" # optional
1372 ##      url             "http://example.com"    # optional
1373 ##      genre           "jazz"                  # optional
1374 ##      public          "no"                    # optional
1375 ##      timeout         "2"                     # optional
1376 ##      mixer_type      "software"              # optional
1377 #}
1378 #
1379 # An example of a recorder output:
1380 #
1381 #audio_output {
1382 #       type            "recorder"
1383 #       name            "My recorder"
1384 #       encoder         "vorbis"                # optional, vorbis or lame
1385 #       path            "/var/lib/mpd/recorder/mpd.ogg"
1386 ##      quality         "5.0"                   # do not define if bitrate is defined
1387 #       bitrate         "128"                   # do not define if quality is defined
1388 #       format          "44100:16:1"
1389 #}
1390 #
1391 # An example of a httpd output (built-in HTTP streaming server):
1392 #
1393 #audio_output {
1394 #       type            "httpd"
1395 #       name            "My HTTP Stream"
1396 #       encoder         "vorbis"                # optional, vorbis or lame
1397 #       port            "8000"
1398 #       bind_to_address "0.0.0.0"               # optional, IPv4 or IPv6
1399 ##      quality         "5.0"                   # do not define if bitrate is defined
1400 #       bitrate         "128"                   # do not define if quality is defined
1401 #       format          "44100:16:1"
1402 #       max_clients     "0"                     # optional 0=no limit
1403 #}
1404 #
1405 # An example of a pulseaudio output (streaming to a remote pulseaudio server)
1406 #
1407 #audio_output {
1408 #       type            "pulse"
1409 #       name            "My Pulse Output"
1410 ##      server          "remote_server"         # optional
1411 ##      sink            "remote_server_sink"    # optional
1412 #}
1413 #
1414 # An example of a winmm output (Windows multimedia API).
1415 #
1416 #audio_output {
1417 #       type            "winmm"
1418 #       name            "My WinMM output"
1419 ##      device          "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1420 #               or
1421 ##      device          "0"             # optional
1422 ##      mixer_type      "hardware"      # optional
1423 #}
1424 #
1425 # An example of an openal output.
1426 #
1427 #audio_output {
1428 #       type            "openal"
1429 #       name            "My OpenAL output"
1430 ##      device          "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1431 #}
1432 #
1433 # An example of an sndio output.
1434 #
1435 #audio_output {
1436 #       type            "sndio"
1437 #       name            "sndio output"
1438 #       mixer_type      "software"
1439 #}
1440 #
1441 # An example of an OS X output:
1442 #
1443 #audio_output {
1444 #       type            "osx"
1445 #       name            "My OS X Device"
1446 ##      device          "Built-in Output"       # optional
1447 ##      channel_map      "-1,-1,0,1"    # optional
1448 #}
1449 #
1450 ## Example "pipe" output:
1451 #
1452 #audio_output {
1453 #       type            "pipe"
1454 #       name            "my pipe"
1455 #       command         "aplay -f cd 2>/dev/null"
1456 ## Or if you're want to use AudioCompress
1457 #       command         "AudioCompress -m | aplay -f cd 2>/dev/null"
1458 ## Or to send raw PCM stream through PCM:
1459 #       command         "nc example.org 8765"
1460 #       format          "44100:16:2"
1461 #}
1462 #
1463 ## An example of a null output (for no audio output):
1464 #
1465 #audio_output {
1466 #       type            "null"
1467 #       name            "My Null Output"
1468 #       mixer_type      "none"                  # optional
1469 #}
1470 #
1471 ###############################################################################
1472
1473
1474 # Normalization automatic volume adjustments ##################################
1475 #
1476 # This setting specifies the type of ReplayGain to use. This setting can have
1477 # the argument "off", "album", "track" or "auto". "auto" is a special mode that
1478 # chooses between "track" and "album" depending on the current state of
1479 # random playback. If random playback is enabled then "track" mode is used.
1480 # See <http://www.replaygain.org> for more details about ReplayGain.
1481 # This setting is off by default.
1482 #
1483 #replaygain                     "album"
1484 #
1485 # This setting sets the pre-amp used for files that have ReplayGain tags. By
1486 # default this setting is disabled.
1487 #
1488 #replaygain_preamp              "0"
1489 #
1490 # This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1491 # By default this setting is disabled.
1492 #
1493 #replaygain_missing_preamp      "0"
1494 #
1495 # This setting enables or disables ReplayGain limiting.
1496 # MPD calculates actual amplification based on the ReplayGain tags
1497 # and replaygain_preamp / replaygain_missing_preamp setting.
1498 # If replaygain_limit is enabled MPD will never amplify audio signal
1499 # above its original level. If replaygain_limit is disabled such amplification
1500 # might occur. By default this setting is enabled.
1501 #
1502 #replaygain_limit               "yes"
1503 #
1504 # This setting enables on-the-fly normalization volume adjustment. This will
1505 # result in the volume of all playing audio to be adjusted so the output has
1506 # equal "loudness". This setting is disabled by default.
1507 #
1508 #volume_normalization           "no"
1509 #
1510 ###############################################################################
1511
1512 # Character Encoding ##########################################################
1513 #
1514 # If file or directory names do not display correctly for your locale then you
1515 # may need to modify this setting.
1516 #
1517 #filesystem_charset             "UTF-8"
1518 #
1519 ###############################################################################
1520 #+end_src
1521
1522 ** msmtp
1523 :PROPERTIES:
1524 :header-args+: :tangle ~/.msmtprc
1525 :END:
1526
1527 #+begin_src conf
1528 # Set default values for all following accounts.
1529 defaults
1530 port 587
1531 tls on
1532 auth on
1533 #tls_trust_file /etc/ssl/certs/ca-certificates.crt
1534 logfile ~/.msmtp.log
1535
1536 # aminb
1537 account aminb
1538 host nix.aminb.org
1539 # use `msmtp -a aminb --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1540 tls_fingerprint 98:C7:F0:02:7F:2B:D8:B6:D3:BF:E8:C1:D4:07:6B:B5:6C:B1:C7:5D:97:20:70:88:AB:9E:B5:09:5D:2C:DC:8E
1541 tls_starttls on
1542 from amin@aminb.org
1543 user amin@aminb.org
1544 passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
1545
1546 # gnu
1547 account gnu
1548 host fencepost.gnu.org
1549 # use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1550 tls_fingerprint 34:60:91:B5:71:5B:76:87:50:F3:83:13:26:0F:EE:75:42:83:93:9A:E2:AF:1E:87:72:02:C9:61:CE:28:1B:8E
1551 tls_starttls on
1552 from aminb@gnu.org
1553 user aminb
1554 passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
1555
1556 # gnu (bandali)
1557 account gnu-bandali : gnu
1558 from bandali@gnu.org
1559
1560 # uwaterloo
1561 account uwaterloo
1562 host connect.uwaterloo.ca
1563 tls_starttls on
1564 from abandali@uwaterloo.ca
1565 user abandali
1566 passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
1567 tls_trust_file /etc/ssl/certs/ca-certificates.crt
1568
1569 # Set a default account
1570 account default : aminb
1571 #+end_src
1572
1573 ** ncmpcpp
1574
1575 *** config
1576 :PROPERTIES:
1577 :header-args+: :tangle ~/.ncmpcpp/config
1578 :END:
1579
1580 #+begin_src conf :tangle no
1581 ##############################################################
1582 ## This is the example configuration file. Copy it to       ##
1583 ## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
1584 ## and set up your preferences.                             ##
1585 ##############################################################
1586 #
1587 ##### directories ######
1588 ##
1589 ## Directory for storing ncmpcpp related files.
1590 ## Changing it is useful if you want to store
1591 ## everything somewhere else and provide command
1592 ## line setting for alternative location to config
1593 ## file which defines that while launching ncmpcpp.
1594 ##
1595 #
1596 ncmpcpp_directory = ~/.ncmpcpp
1597 #
1598 ##
1599 ## Directory for storing downloaded lyrics. It
1600 ## defaults to ~/.lyrics since other MPD clients
1601 ## (eg. ncmpc) also use that location.
1602 ##
1603 #
1604 #lyrics_directory = ~/.lyrics
1605 #
1606 ##### connection settings #####
1607 #
1608 #mpd_host = localhost
1609 #
1610 #mpd_port = 6600
1611 #
1612 #mpd_connection_timeout = 5
1613 #
1614 ## Needed for tag editor and file operations to work.
1615 ##
1616 mpd_music_dir = ~/usr/music
1617 #
1618 #mpd_crossfade_time = 5
1619 #
1620 ##### music visualizer #####
1621 ##
1622 ## Note: In order to make music visualizer work you'll
1623 ## need to use mpd fifo output, whose format parameter
1624 ## has to be set to 44100:16:1 for mono visualization
1625 ## or 44100:16:2 for stereo visualization. Example
1626 ## configuration (it has to be put into mpd.conf):
1627 ##
1628 ## audio_output {
1629 ##        type            "fifo"
1630 ##        name            "Visualizer feed"
1631 ##        path            "/tmp/mpd.fifo"
1632 ##        format          "44100:16:2"
1633 ## }
1634 ##
1635 #
1636 visualizer_fifo_path = /tmp/mpd.fifo
1637 #
1638 ##
1639 ## Note: Below parameter is needed for ncmpcpp
1640 ## to determine which output provides data for
1641 ## visualizer and thus allow syncing between
1642 ## visualization and sound as currently there
1643 ## are some problems with it.
1644 ##
1645 #
1646 visualizer_output_name = my fifo
1647 #
1648 ##
1649 ## If you set format to 44100:16:2, make it 'yes'.
1650 ##
1651 visualizer_in_stereo = yes
1652 #
1653 ##
1654 ## Multiply received samples by given value. Very
1655 ## useful for proper visualization of quiet music.
1656 ##
1657 #visualizer_sample_multiplier = 1
1658 #
1659 ##
1660 ## Note: Below parameter defines how often ncmpcpp
1661 ## has to "synchronize" visualizer and audio outputs.
1662 ## 30 seconds is optimal value, but if you experience
1663 ## synchronization problems, set it to lower value.
1664 ## Keep in mind that sane values start with >=10.
1665 ##
1666 #
1667 visualizer_sync_interval = 30
1668 #
1669 ##
1670 ## Note: To enable spectrum frequency visualization
1671 ## you need to compile ncmpcpp with fftw3 support.
1672 ##
1673 #
1674 ## Available values: spectrum, wave, wave_filled, ellipse.
1675 ##
1676 visualizer_type = spectrum
1677 #
1678 #visualizer_look = ●▮
1679 visualizer_look = "●•"
1680 #
1681 #visualizer_color = blue, cyan, green, yellow, magenta, red
1682 #
1683 ## Alternative subset of 256 colors for terminals that support it.
1684 ##
1685 #visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
1686 #
1687 ##### system encoding #####
1688 ##
1689 ## ncmpcpp should detect your charset encoding
1690 ## but if it failed to do so, you can specify
1691 ## charset encoding you are using here.
1692 ##
1693 ## Note: You can see whether your ncmpcpp build
1694 ## supports charset detection by checking output
1695 ## of `ncmpcpp --version`.
1696 ##
1697 ## Note: Since MPD uses UTF-8 by default, setting
1698 ## this option makes sense only if your encoding
1699 ## is different.
1700 ##
1701 #
1702 #system_encoding = ""
1703 #
1704 ##### delays #####
1705 #
1706 ## Time of inactivity (in seconds) after playlist
1707 ## highlighting will be disabled (0 = always on).
1708 ##
1709 #playlist_disable_highlight_delay = 5
1710 #
1711 ## Defines how long messages are supposed to be visible.
1712 ##
1713 #message_delay_time = 5
1714 #
1715 ##### song format #####
1716 ##
1717 ## For a song format you can use:
1718 ##
1719 ## %l - length
1720 ## %f - filename
1721 ## %D - directory
1722 ## %a - artist
1723 ## %A - album artist
1724 ## %t - title
1725 ## %b - album
1726 ## %y - date
1727 ## %n - track number (01/12 -> 01)
1728 ## %N - full track info (01/12 -> 01/12)
1729 ## %g - genre
1730 ## %c - composer
1731 ## %p - performer
1732 ## %d - disc
1733 ## %C - comment
1734 ## %P - priority
1735 ## $R - begin right alignment
1736 ##
1737 ## If you want to make sure that a part of the format is displayed
1738 ## only when certain tags are present, you can archieve it by
1739 ## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
1740 ## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
1741 ## It is also possible to define a list of alternatives by providing
1742 ## several groups and separating them with '|', e.g. '{%t}|{%f}'
1743 ## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
1744 ## present.
1745 ##
1746 ## Note: If you want to set limit on maximal length of a tag, just
1747 ## put the appropriate number between % and character that defines
1748 ## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
1749 ##
1750 ## In addition, formats support markers used for text attributes.
1751 ## They are followed by character '$'. After that you can put:
1752 ##
1753 ## - 0 - default window color (discards all other colors)
1754 ## - 1 - black
1755 ## - 2 - red
1756 ## - 3 - green
1757 ## - 4 - yellow
1758 ## - 5 - blue
1759 ## - 6 - magenta
1760 ## - 7 - cyan
1761 ## - 8 - white
1762 ## - 9 - end of current color
1763 ## - b - bold text
1764 ## - u - underline text
1765 ## - r - reverse colors
1766 ## - a - use alternative character set
1767 ##
1768 ## If you don't want to use a non-color attribute anymore, just put it
1769 ## again, but this time insert character '/' between '$' and attribute
1770 ## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
1771 ## or filename with reversed colors.
1772 ##
1773 ## If you want to use 256 colors and/or background colors in formats
1774 ## (the naming scheme is described below in section about color
1775 ## definitions), it can be done with the syntax $(COLOR), e.g. to set
1776 ## the artist tag to one of the non-standard colors and make it have
1777 ## yellow background, you need to write $(197_yellow)%a$(end). Note
1778 ## that for standard colors this is interchangable with attributes
1779 ## listed above.
1780 ##
1781 ## Note: colors can be nested.
1782 ##
1783 #
1784 #song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
1785 #
1786 #song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
1787 #
1788 #song_library_format = {%n - }{%t}|{%f}
1789 #
1790 #
1791 #alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
1792 #
1793 #alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
1794 #
1795 #now_playing_prefix = $b
1796 #
1797 #now_playing_suffix = $/b
1798 #
1799 #browser_playlist_prefix = "$2playlist$9 "
1800 #
1801 #selected_item_prefix = $6
1802 #
1803 #selected_item_suffix = $9
1804 #
1805 #modified_item_prefix = $3> $9
1806 #
1807 ##
1808 ## Note: attributes are not supported for the following variables.
1809 ##
1810 #song_window_title_format = {%a - }{%t}|{%f}
1811 ##
1812 ## Note: Below variables are used for sorting songs in browser.
1813 ## The sort mode determines how songs are sorted, and can be used
1814 ## in combination with a sort format to specify a custom sorting format.
1815 ## Available values for browser_sort_mode are "name", "mtime", "format"
1816 ## and "noop".
1817 ##
1818 #
1819 #browser_sort_mode = name
1820 #
1821 #browser_sort_format = {%a - }{%t}|{%f} {(%l)}
1822 #
1823 ##### columns settings #####
1824 ##
1825 ## syntax of song columns list format is "column column etc."
1826 ##
1827 ## - syntax for each column is:
1828 ##
1829 ## (width of the column)[color of the column]{displayed tag}
1830 ##
1831 ## Note: Width is by default in %, if you want a column to
1832 ## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
1833 ## will be the column that take 10% of screen (so the real width
1834 ## will depend on actual screen size), whereas (10f)[white]{a}
1835 ## will take 10 terminal cells, no matter how wide the screen is.
1836 ##
1837 ## - color is optional (if you want the default one,
1838 ##   leave the field empty).
1839 ##
1840 ## Note: You can give a column additional attributes by putting appropriate
1841 ## character after displayed tag character. Available attributes are:
1842 ##
1843 ## - r - column will be right aligned
1844 ## - E - if tag is empty, empty tag marker won't be displayed
1845 ##
1846 ## You can also:
1847 ##
1848 ## - give a column custom name by putting it after attributes,
1849 ##   separated with character ':', e.g. {lr:Length} gives you
1850 ##   right aligned column of lengths named "Length".
1851 ##
1852 ## - define sequence of tags, that have to be displayed in case
1853 ##   predecessor is empty in a way similar to the one in classic
1854 ##   song format, i.e. using '|' character, e.g. {a|c|p:Owner}
1855 ##   creates column named "Owner" that tries to display artist
1856 ##   tag and then composer and performer if previous ones are
1857 ##   not available.
1858 ##
1859 #
1860 #song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
1861 #
1862 ##### various settings #####
1863 #
1864 ##
1865 ## Note: Custom command that will be executed each
1866 ## time song changes. Useful for notifications etc.
1867 ##
1868 #execute_on_song_change = ""
1869 #
1870 #playlist_show_mpd_host = no
1871 #
1872 #playlist_show_remaining_time = no
1873 #
1874 #playlist_shorten_total_times = no
1875 #
1876 #playlist_separate_albums = no
1877 #
1878 ##
1879 ## Note: Possible display modes: classic, columns.
1880 ##
1881 #playlist_display_mode = columns
1882 #
1883 #browser_display_mode = classic
1884 #
1885 #search_engine_display_mode = classic
1886 #
1887 #playlist_editor_display_mode = classic
1888 #
1889 #discard_colors_if_item_is_selected = yes
1890 #
1891 #incremental_seeking = yes
1892 #
1893 #seek_time = 1
1894 #
1895 #volume_change_step = 2
1896 #
1897 #autocenter_mode = no
1898 #
1899 #centered_cursor = no
1900 #
1901 ##
1902 ## Note: You can specify third character which will
1903 ## be used to build 'empty' part of progressbar.
1904 ##
1905 #progressbar_look = =>
1906 progressbar_look = "─╼╶"
1907 #progressbar_look = "─⊙╶"
1908 #
1909 #progressbar_boldness = yes
1910 #
1911 ## Available values: database, playlist.
1912 ##
1913 #default_place_to_search_in = database
1914 #
1915 ## Available values: classic, alternative.
1916 ##
1917 #user_interface = classic
1918 #
1919 #data_fetching_delay = yes
1920 #
1921 ## Available values: artist, album_artist, date, genre, composer, performer.
1922 ##
1923 #media_library_primary_tag = artist
1924 #
1925 ## Available values: wrapped, normal.
1926 ##
1927 #default_find_mode = wrapped
1928 #
1929 #default_tag_editor_pattern = %n - %t
1930 #
1931 #header_visibility = yes
1932 #
1933 #statusbar_visibility = yes
1934 #
1935 #titles_visibility = yes
1936 #
1937 #header_text_scrolling = yes
1938 #
1939 #cyclic_scrolling = no
1940 #
1941 #lines_scrolled = 2
1942 #
1943 #follow_now_playing_lyrics = no
1944 #
1945 #fetch_lyrics_for_current_song_in_background = no
1946 #
1947 #store_lyrics_in_song_dir = no
1948 #
1949 #generate_win32_compatible_filenames = yes
1950 #
1951 #allow_for_physical_item_deletion = no
1952 #
1953 ##
1954 ## Note: If you set this variable, ncmpcpp will try to
1955 ## get info from last.fm in language you set and if it
1956 ## fails, it will fall back to english. Otherwise it will
1957 ## use english the first time.
1958 ##
1959 ## Note: Language has to be expressed as an ISO 639 alpha-2 code.
1960 ##
1961 #lastfm_preferred_language = en
1962 #
1963 #show_hidden_files_in_local_browser = no
1964 #
1965 ##
1966 ## How shall screen switcher work?
1967 ##
1968 ## - "previous" - switch between the current and previous screen.
1969 ## - "screen1,...,screenN" - switch between given sequence of screens.
1970 ##
1971 ## Screens available for use: help, playlist, browser, search_engine,
1972 ## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
1973 ##
1974 #screen_switcher_mode = playlist, browser
1975 #
1976 ##
1977 ## Note: You can define startup screen
1978 ## by choosing screen from the list above.
1979 ##
1980 #startup_screen = playlist
1981 #
1982 ##
1983 ## Note: You can define startup slave screen
1984 ## by choosing screen from the list above or
1985 ## an empty value for no slave screen.
1986 ##
1987 #startup_slave_screen = ""
1988 #
1989 #startup_slave_screen_focus = no
1990 #
1991 ##
1992 ## Default width of locked screen (in %).
1993 ## Acceptable values are from 20 to 80.
1994 ##
1995 #
1996 #locked_screen_width_part = 50
1997 #
1998 #ask_for_locked_screen_width_part = yes
1999 #
2000 #jump_to_now_playing_song_at_start = yes
2001 #
2002 #ask_before_clearing_playlists = yes
2003 #
2004 #clock_display_seconds = no
2005 #
2006 #display_volume_level = yes
2007 #
2008 #display_bitrate = no
2009 #
2010 #display_remaining_time = no
2011 #
2012 ## Available values: none, basic, extended, perl.
2013 ##
2014 #regular_expressions = perl
2015 #
2016 ##
2017 ## Note: If below is enabled, ncmpcpp will ignore leading
2018 ## "The" word while sorting items in browser, tags in
2019 ## media library, etc.
2020 ##
2021 #ignore_leading_the = no
2022 #
2023 #block_search_constraints_change_if_items_found = yes
2024 #
2025 #mouse_support = yes
2026 #
2027 #mouse_list_scroll_whole_page = yes
2028 #
2029 #empty_tag_marker = <empty>
2030 #
2031 #tags_separator = " | "
2032 #
2033 #tag_editor_extended_numeration = no
2034 #
2035 #media_library_sort_by_mtime = no
2036 #
2037 #enable_window_title = yes
2038 #
2039 ##
2040 ## Note: You can choose default search mode for search
2041 ## engine. Available modes are:
2042 ##
2043 ## - 1 - use mpd built-in searching (no regexes, pattern matching)
2044 ## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
2045 ##       but if your mpd is on a remote machine, downloading big database
2046 ##       to process it can take a while
2047 ## - 3 - match only exact values (this mode uses mpd function for searching
2048 ##       in database and local one for searching in current playlist)
2049 ##
2050 #
2051 #search_engine_default_search_mode = 1
2052 #
2053 #external_editor = nano
2054 #
2055 ## Note: set to yes if external editor is a console application.
2056 ##
2057 #use_console_editor = yes
2058 #
2059 ##### colors definitions #####
2060 ##
2061 ## It is possible to set a background color by setting a color
2062 ## value "<foreground>_<background>", e.g. red_black will set
2063 ## foregound color to red and background color to black.
2064 ##
2065 ## In addition, for terminals that support 256 colors it
2066 ## is possible to set one of them by using a number in range
2067 ## [1, 256] instead of color name, e.g. numerical value
2068 ## corresponding to red_black is 2_1. To find out if the
2069 ## terminal supports 256 colors, run ncmpcpp and check out
2070 ## the bottom of the help screen for list of available colors
2071 ## and their numerical values.
2072 ##
2073 ## Note: due to technical limitations of ncurses, if 256 colors
2074 ## are used, it is possible to either use only the colors with
2075 ## default background color, or all pairs from 1_1 up to 254_127,
2076 ## depending on the ncurses version used.
2077 ##
2078 #
2079 #colors_enabled = yes
2080 #
2081 #empty_tag_color = cyan
2082 #
2083 #header_window_color = default
2084 #
2085 #volume_color = default
2086 #
2087 #state_line_color = default
2088 #
2089 #state_flags_color = default
2090 #
2091 #main_window_color = yellow
2092 #
2093 #color1 = white
2094 #
2095 #color2 = green
2096 #
2097 #main_window_highlight_color = yellow
2098 #
2099 #progressbar_color = black
2100 #
2101 #progressbar_elapsed_color = green
2102 #
2103 #statusbar_color = default
2104 #
2105 #alternative_ui_separator_color = black
2106 #
2107 #active_column_color = red
2108 #
2109 #window_border_color = green
2110 #
2111 #active_window_border = red
2112 #
2113 #+end_src
2114
2115 *** bindings
2116 :PROPERTIES:
2117 :header-args+: :tangle ~/.ncmpcpp/bindings
2118 :END:
2119
2120 #+begin_src conf :tangle no
2121 def_key "j"
2122     scroll_down
2123 def_key "k"
2124     scroll_up
2125
2126 def_key "ctrl-u"
2127     page_up
2128 def_key "ctrl-d"
2129     page_down
2130
2131 def_key "h"
2132     previous_column
2133 def_key "l"
2134     next_column
2135
2136 def_key "."
2137     show_lyrics
2138
2139 def_key "n"
2140     next_found_item
2141 def_key "N"
2142     previous_found_item
2143
2144 def_key "J"
2145     move_sort_order_down
2146 def_key "K"
2147     move_sort_order_up
2148 #+end_src
2149
2150 ** notmuch
2151
2152 *** notmuch-config
2153 :PROPERTIES:
2154 :header-args+: :tangle ~/.notmuch-config
2155 :END:
2156
2157 #+begin_src conf
2158 # .notmuch-config - Configuration file for the notmuch mail system
2159 #
2160 # For more information about notmuch, see https://notmuchmail.org
2161
2162 # Database configuration
2163 #
2164 # The only value supported here is 'path' which should be the top-level
2165 # directory where your mail currently exists and to where mail will be
2166 # delivered in the future. Files should be individual email messages.
2167 # Notmuch will store its database within a sub-directory of the path
2168 # configured here named ".notmuch".
2169 #
2170 [database]
2171 path=/home/amin/mail
2172
2173 # User configuration
2174 #
2175 # Here is where you can let notmuch know how you would like to be
2176 # addressed. Valid settings are
2177 #
2178 #       name            Your full name.
2179 #       primary_email   Your primary email address.
2180 #       other_email     A list (separated by ';') of other email addresses
2181 #                       at which you receive email.
2182 #
2183 # Notmuch will use the various email addresses configured here when
2184 # formatting replies. It will avoid including your own addresses in the
2185 # recipient list of replies, and will set the From address based on the
2186 # address to which the original email was addressed.
2187 #
2188 [user]
2189 name=Amin Bandali
2190 primary_email=amin@aminb.org
2191 other_email=bandali@gnu.org;abandali@uwaterloo.ca;
2192
2193 # Configuration for "notmuch new"
2194 #
2195 # The following options are supported here:
2196 #
2197 #       tags    A list (separated by ';') of the tags that will be
2198 #               added to all messages incorporated by "notmuch new".
2199 #
2200 #       ignore  A list (separated by ';') of file and directory names
2201 #               that will not be searched for messages by "notmuch new".
2202 #
2203 #               NOTE: *Every* file/directory that goes by one of those
2204 #               names will be ignored, independent of its depth/location
2205 #               in the mail store.
2206 #
2207 [new]
2208 tags=new;
2209 #tags=unread;inbox;
2210 ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
2211
2212 # Search configuration
2213 #
2214 # The following option is supported here:
2215 #
2216 #       exclude_tags
2217 #               A ;-separated list of tags that will be excluded from
2218 #               search results by default.  Using an excluded tag in a
2219 #               query will override that exclusion.
2220 #
2221 [search]
2222 exclude_tags=deleted;spam;
2223
2224 # Maildir compatibility configuration
2225 #
2226 # The following option is supported here:
2227 #
2228 #       synchronize_flags      Valid values are true and false.
2229 #
2230 #       If true, then the following maildir flags (in message filenames)
2231 #       will be synchronized with the corresponding notmuch tags:
2232 #
2233 #               Flag    Tag
2234 #               ----    -------
2235 #               D       draft
2236 #               F       flagged
2237 #               P       passed
2238 #               R       replied
2239 #               S       unread (added when 'S' flag is not present)
2240 #
2241 #       The "notmuch new" command will notice flag changes in filenames
2242 #       and update tags, while the "notmuch tag" and "notmuch restore"
2243 #       commands will notice tag changes and update flags in filenames
2244 #
2245 [maildir]
2246 synchronize_flags=true
2247
2248 # Cryptography related configuration
2249 #
2250 # The following option is supported here:
2251 #
2252 #       gpg_path
2253 #               binary name or full path to invoke gpg.
2254 #
2255 [crypto]
2256 gpg_path=gpg
2257 #+end_src
2258
2259 *** pre-new hook
2260 :PROPERTIES:
2261 :header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
2262 :END:
2263
2264 #+begin_src sh
2265 touch /tmp/gnusieve.log
2266 sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
2267              -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
2268 #+end_src
2269
2270 *** post-new hook
2271 :PROPERTIES:
2272 :header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
2273 :END:
2274
2275 #+begin_src sh
2276 # apply sent tag to messages sent by me
2277 notmuch tag -new +sent -- from:amin@aminb.org or from:bandali@gnu.org or from:aminb@gnu.org or from:amin@gnu.org or from:mab@gnu.org or from:abandali@uwaterloo.ca
2278
2279 # initial tagging
2280 notmuch tag -latest                     -- tag:latest
2281 notmuch tag +inbox +unread +latest -new -- tag:new
2282
2283
2284 # apply tags to lists
2285
2286 # <aminb>
2287 notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
2288 notmuch tag -inbox +lists/haskell-weekly   -- folder:amin/lists/haskell-weekly
2289
2290 notmuch tag -inbox +pay     -- folder:amin/pay
2291 notmuch tag -inbox +banking -- folder:amin/banking
2292 notmuch tag -inbox +work    -- folder:amin/work
2293 # </aminb>
2294
2295 # <uw>
2296 notmuch tag -inbox +uw/cs136  -- folder:uwaterloo/lists/cs136
2297 notmuch tag -inbox +uw/cs846  -- folder:uwaterloo/lists/cs846
2298 notmuch tag -inbox +uw/ece750 -- folder:uwaterloo/lists/ece750
2299 notmuch tag -inbox +uw/se212  -- folder:uwaterloo/lists/se212
2300 notmuch tag -inbox +uw/se463  -- folder:uwaterloo/lists/se463
2301
2302 notmuch tag -inbox +lists/alloytools       -- folder:uwaterloo/lists/alloytools
2303 notmuch tag -inbox +lists/clvsingle        -- folder:uwaterloo/lists/Clvsingle
2304 notmuch tag -inbox +lists/gsa              -- folder:uwaterloo/lists/GSA
2305 notmuch tag -inbox +lists/math-grad        -- folder:uwaterloo/lists/Math-grad
2306 notmuch tag -inbox +lists/scs-grads        -- folder:uwaterloo/lists/scs-grads
2307 notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
2308 # </uw>
2309
2310 # <gnu>
2311 notmuch tag -inbox +l/emacs-devel       -- folder:gnu/l/emacs-devel
2312 notmuch tag -inbox +l/emacs-orgmode     -- folder:gnu/l/emacs-orgmode
2313 notmuch tag -inbox +l/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
2314 notmuch tag -inbox +l/fencepost-users   -- folder:gnu/l/fencepost-users
2315 notmuch tag -inbox +l/guix-devel        -- folder:gnu/l/guix-devel
2316 notmuch tag -inbox +l/guile-devel       -- folder:gnu/l/guile-devel
2317 notmuch tag -inbox +l/help-gnu-emacs    -- folder:gnu/l/help-gnu-emacs
2318 notmuch tag -inbox +l/info-gnu-emacs    -- folder:gnu/l/info-gnu-emacs
2319 notmuch tag -inbox +l/www-commits       -- folder:gnu/l/www-commits
2320 notmuch tag -inbox +l/www-discuss       -- folder:gnu/l/www-discuss
2321 notmuch tag -inbox +webmasters          -- folder:gnu/webmasters
2322
2323 notmuch tag -inbox +l/deepspec     -- folder:gnu/l/deepspec
2324 notmuch tag -inbox +l/haskell-cafe -- folder:gnu/l/haskell-cafe
2325 notmuch tag -inbox +l/haskell-art  -- folder:gnu/l/haskell-art
2326 notmuch tag -inbox +l/notmuch      -- folder:gnu/l/notmuch
2327
2328 notmuch tag -inbox +l/~aminb/test-priv         -- folder:gnu/l/~aminb/test-priv
2329 notmuch tag -inbox +l/~sircmpwn/sr.ht-admins   -- folder:gnu/l/~sircmpwn/sr.ht-admins
2330 notmuch tag -inbox +l/~sircmpwn/sr.ht-announce -- folder:gnu/l/~sircmpwn/sr.ht-announce
2331 notmuch tag -inbox +l/~sircmpwn/sr.ht-dev      -- folder:gnu/l/~sircmpwn/sr.ht-dev
2332 notmuch tag -inbox +l/~sircmpwn/sr.ht-discuss  -- folder:gnu/l/~sircmpwn/sr.ht-discuss
2333 # </gnu>
2334
2335 notmuch tag -inbox -unread +archive/notmuch     -- path:archive/notmuch/**
2336 notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**
2337 #+end_src
2338
2339 *** notmuch.service
2340 :PROPERTIES:
2341 :header-args+: :tangle ~/.config/systemd/user/notmuch.service
2342 :END:
2343
2344 #+begin_src conf :tangle no
2345 [Unit]
2346 Description=notmuch service
2347
2348 [Service]
2349 Type=oneshot
2350 ExecStart=/usr/bin/notmuch new
2351 StandardOutput=syslog
2352 StandardError=syslog
2353 #+end_src
2354
2355 *** notmuch.timer
2356 :PROPERTIES:
2357 :header-args+: :tangle ~/.config/systemd/user/notmuch.timer
2358 :END:
2359
2360 #+begin_src conf :tangle no
2361 [Unit]
2362 Description=notmuch timer
2363
2364 [Timer]
2365 OnCalendar=*:0/5
2366 Persistent=true
2367 Unit=notmuch.service
2368
2369 [Install]
2370 WantedBy=timers.target
2371 #+end_src
2372
2373 ** offlineimap
2374
2375 *** offlineimaprc
2376 :PROPERTIES:
2377 :header-args+: :tangle ~/.offlineimaprc
2378 :END:
2379
2380 #+begin_src conf :tangle no
2381 [general]
2382 pythonfile = ~/.offlineimap.py
2383 accounts = Gmail, aminb
2384 maxsyncaccounts = 3
2385
2386 [Account Gmail]
2387 localrepository = GmailL
2388 remoterepository = GmailR
2389
2390 [Account aminb]
2391 localrepository = aminbL
2392 remoterepository = aminbR
2393
2394 [Repository GmailL]
2395 type = Maildir
2396 localfolders = ~/Maildir/Gmail
2397
2398 [Repository GmailR]
2399 type = IMAP
2400 remotehost = imap.gmail.com
2401 remoteusereval = mailuser("gmail")
2402 remotepasseval = mailpasswd("gmail")
2403 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2404 ssl = yes
2405 folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
2406 maxconnections = 1
2407 realdelete = no
2408
2409 [Repository aminbL]
2410 type = Maildir
2411 localfolders = ~/Maildir/aminb
2412
2413 [Repository aminbR]
2414 type = IMAP
2415 remotehost = mail.aminb.org
2416 remoteusereval = mailuser("aminb")
2417 remotepasseval = mailpasswd("aminb")
2418 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2419 ssl = yes
2420 folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
2421 maxconnections = 1
2422 realdelete = no
2423 #+end_src
2424
2425 *** offlineimap.py
2426 :PROPERTIES:
2427 :header-args+: :tangle ~/.offlineimap.py
2428 :END:
2429
2430 #+begin_src python :tangle no
2431 import os
2432 import subprocess
2433
2434 def mailpasswd(acct):
2435     acct = os.path.basename(acct)
2436     path = "/home/amin/.passwd/%s.gpg" % acct
2437     args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
2438     try:
2439         return subprocess.check_output(args).strip()
2440     except subprocess.CalledProcessError:
2441         return ""
2442
2443 def mailuser(acct):
2444     acct = os.path.basename(acct)
2445     path = "/home/amin/.passwd/%s" % acct
2446     args = ["cat", path]
2447     try:
2448         return subprocess.check_output(args).strip()
2449     except subprocess.CalledProcessError:
2450         return ""
2451
2452 def prime_gpg_agent():
2453   ret = False
2454   i = 1
2455   while not ret:
2456     ret = (mailpasswd("prime") == "prime")
2457     if i > 2:
2458       from offlineimap.ui import getglobalui
2459       sys.stderr.write("Error reading in passwords. Terminating.\n")
2460       getglobalui().terminate()
2461     i += 1
2462   return ret
2463
2464 prime_gpg_agent()
2465 #+end_src
2466
2467 ** pigeonhole
2468 *** gnu.sieve
2469 :PROPERTIES:
2470 :header-args+: :tangle ~/sieve/gnu.sieve :comments none
2471 :END:
2472
2473 #+begin_src conf
2474 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags", "include" ];
2475
2476 if anyof (
2477   address :is "from" "webmasters@gnu.org",
2478   address :is "from" "webmasters-comment@gnu.org") {
2479   fileinto :create "webmasters";
2480   stop;
2481 }
2482
2483 include :personal "lists";
2484 #+end_src
2485
2486 *** lists.sieve
2487 :PROPERTIES:
2488 :header-args+: :tangle ~/sieve/lists.sieve :comments none
2489 :END:
2490
2491 #+begin_src conf
2492 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags",
2493  "include" ];
2494
2495 if anyof (
2496     header :contains "list-id" "<emacs-devel.gnu.org>",
2497     header :contains "list-id" "<emacs-orgmode.gnu.org>",
2498     header :contains "list-id" "<emacsconf-discuss.gnu.org>",
2499     header :contains "list-id" "<fencepost-users.gnu.org>",
2500     header :contains "list-id" "<guix-devel.gnu.org>",
2501     header :contains "list-id" "<guile-devel.gnu.org>",
2502     header :contains "list-id" "<help-gnu-emacs.gnu.org>",
2503     header :contains "list-id" "<info-gnu-emacs.gnu.org>",
2504     header :contains "list-id" "<www-commits.gnu.org>",
2505     header :contains "list-id" "<www-discuss.gnu.org>",
2506     header :contains "list-id" "<deepspec.lists.cs.princeton.edu>",
2507     header :contains "list-id" "<haskell-cafe.haskell.org>",
2508     header :contains "list-id" "<haskell-art.we.lurk.org>",
2509     header :contains "list-id" "<notmuch.notmuchmail.org>") {
2510     if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
2511         set :lower "listname" "${1}";
2512         fileinto :create "l/${listname}";
2513     }
2514 }
2515
2516 if anyof (
2517     header :contains "list-id" "<~aminb/test-priv@lists.sr.ht>",
2518     header :contains "list-id" "<~sircmpwn/sr.ht-admins@lists.sr.ht>",
2519     header :contains "list-id" "<~sircmpwn/sr.ht-announce@lists.sr.ht>",
2520     header :contains "list-id" "<~sircmpwn/sr.ht-dev@lists.sr.ht>",
2521     header :contains "list-id" "<~sircmpwn/sr.ht-discuss@lists.sr.ht>") {
2522     if header :regex "list-id" "(~[a-z_0-9-]+)/([a-z_0-9.-]+)@" {
2523         set :lower "username" "${1}";
2524         set :lower "listname" "${2}";
2525         fileinto :create "l/${username}/${listname}";
2526     }
2527 }
2528 #+end_src
2529
2530 ** polybar
2531
2532 *** config
2533 :PROPERTIES:
2534 :header-args+: :tangle ~/.config/polybar/config
2535 :END:
2536
2537 #+begin_src conf :tangle no
2538 ;=====================================================
2539 ;
2540 ;   To learn more about how to configure Polybar
2541 ;   go to https://github.com/jaagr/polybar
2542 ;
2543 ;   The README contains alot of information
2544 ;
2545 ;=====================================================
2546
2547 [colors]
2548 ;background = ${xrdb:color0:#222}
2549 background = #222
2550 background-alt = #444
2551 ;foreground = ${xrdb:color7:#222}
2552 foreground = #eee
2553 foreground-alt = #888
2554 primary = #ffb52a
2555 secondary = #e60053
2556 alert = #bd2c40
2557
2558 [bar/main]
2559 ;monitor = ${env:MONITOR:HDMI-1}
2560 width = 100%
2561 height = 27
2562 ;offset-x = 1%
2563 ;offset-y = 1%
2564 radius = 3.0
2565 fixed-center = true
2566
2567 background = ${colors.background}
2568 foreground = ${colors.foreground}
2569
2570 line-size = 3
2571 line-color = #f00
2572
2573 border-size = 4
2574 border-color = #00000000
2575
2576 padding-left = 0
2577 padding-right = 2
2578
2579 module-margin-left = 2
2580 module-margin-right = 2
2581
2582 font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
2583 font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
2584 font-2 = Wuncon Siji:pixelsize=10;1
2585 font-3 = FontAwesome:pixelsize=10;1
2586
2587 modules-left = bspwm xwindow
2588 modules-center =
2589 modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
2590
2591 tray-position = right
2592 tray-padding = 1
2593 ;tray-transparent = true
2594 ;tray-background = #0063ff
2595 tray-maxsize = 18
2596
2597 wm-restack = bspwm
2598
2599 ;override-redirect = true
2600
2601 scroll-up = bspwm-desknext
2602 scroll-down = bspwm-deskprev
2603
2604 [module/xwindow]
2605 type = internal/xwindow
2606 label = %title:0:50:...%
2607
2608 [module/xkeyboard]
2609 type = internal/xkeyboard
2610 blacklist-0 = num lock
2611
2612 format-prefix = " "
2613 format-prefix-foreground = ${colors.foreground-alt}
2614 format-prefix-underline = ${colors.secondary}
2615
2616 label-layout = %layout%
2617 label-layout-underline = ${colors.secondary}
2618
2619 label-indicator-padding = 2
2620 label-indicator-margin = 1
2621 label-indicator-background = ${colors.secondary}
2622 label-indicator-underline = ${colors.secondary}
2623
2624 [module/filesystem]
2625 type = internal/fs
2626 interval = 25
2627
2628 mount-0 = /
2629
2630 label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
2631 label-unmounted = %mountpoint% not mounted
2632 label-unmounted-foreground = ${colors.foreground-alt}
2633
2634 [module/bspwm]
2635 type = internal/bspwm
2636
2637 label-focused = %index%
2638 label-focused-background = ${colors.background-alt}
2639 label-focused-underline= ${colors.primary}
2640 label-focused-padding = 2
2641
2642 label-occupied = %index%
2643 label-occupied-padding = 2
2644
2645 label-urgent = %index%!
2646 label-urgent-background = ${colors.alert}
2647 label-urgent-padding = 2
2648
2649 label-empty = %index%
2650 label-empty-foreground = ${colors.foreground-alt}
2651 label-empty-padding = 2
2652
2653 [module/i3]
2654 type = internal/i3
2655 format = <label-state> <label-mode>
2656 index-sort = true
2657 wrapping-scroll = false
2658
2659 ; Only show workspaces on the same output as the bar
2660 ;pin-workspaces = true
2661
2662 label-mode-padding = 2
2663 label-mode-foreground = #000
2664 label-mode-background = ${colors.primary}
2665
2666 ; focused = Active workspace on focused monitor
2667 label-focused = %index%
2668 label-focused-background = ${module/bspwm.label-focused-background}
2669 label-focused-underline = ${module/bspwm.label-focused-underline}
2670 label-focused-padding = ${module/bspwm.label-focused-padding}
2671
2672 ; unfocused = Inactive workspace on any monitor
2673 label-unfocused = %index%
2674 label-unfocused-padding = ${module/bspwm.label-occupied-padding}
2675
2676 ; visible = Active workspace on unfocused monitor
2677 label-visible = %index%
2678 label-visible-background = ${self.label-focused-background}
2679 label-visible-underline = ${self.label-focused-underline}
2680 label-visible-padding = ${self.label-focused-padding}
2681
2682 ; urgent = Workspace with urgency hint set
2683 label-urgent = %index%
2684 label-urgent-background = ${module/bspwm.label-urgent-background}
2685 label-urgent-padding = ${module/bspwm.label-urgent-padding}
2686
2687 [module/mpd]
2688 type = internal/mpd
2689 format-online = <label-song>  <icon-prev> <icon-stop> <toggle> <icon-next>
2690
2691 icon-prev = 
2692 icon-stop = 
2693 icon-play = 
2694 icon-pause = 
2695 icon-next = 
2696
2697 label-song-maxlen = 25
2698 label-song-ellipsis = true
2699
2700 [module/xbacklight]
2701 type = internal/xbacklight
2702
2703 format = <label> <bar>
2704 label = BL
2705
2706 bar-width = 10
2707 bar-indicator = |
2708 bar-indicator-foreground = #ff
2709 bar-indicator-font = 2
2710 bar-fill = ─
2711 bar-fill-font = 2
2712 bar-fill-foreground = #9f78e1
2713 bar-empty = ─
2714 bar-empty-font = 2
2715 bar-empty-foreground = ${colors.foreground-alt}
2716
2717 [module/backlight-acpi]
2718 inherit = module/xbacklight
2719 type = internal/backlight
2720 ;card = intel_backlight
2721 card = mba6x_backlight
2722
2723 [module/cpu]
2724 type = internal/cpu
2725 interval = 2
2726 format-prefix = " "
2727 format-prefix-foreground = ${colors.foreground-alt}
2728 format-underline = #f90000
2729 label = %percentage%%
2730
2731 [module/memory]
2732 type = internal/memory
2733 interval = 2
2734 format-prefix = " "
2735 format-prefix-foreground = ${colors.foreground-alt}
2736 format-underline = #4bffdc
2737 label = %percentage_used%%
2738
2739 [module/wlan]
2740 type = internal/network
2741 interface =
2742 interval = 3.0
2743
2744 format-connected = <ramp-signal> <label-connected>
2745 format-connected-underline = #9f78e1
2746 label-connected = %essid%
2747
2748 format-disconnected =
2749 ;format-disconnected = <label-disconnected>
2750 ;format-disconnected-underline = ${self.format-connected-underline}
2751 ;label-disconnected = %ifname% disconnected
2752 ;label-disconnected-foreground = ${colors.foreground-alt}
2753
2754 ramp-signal-0 = 
2755 ramp-signal-1 = 
2756 ramp-signal-2 = 
2757 ramp-signal-3 = 
2758 ramp-signal-4 = 
2759 ramp-signal-foreground = ${colors.foreground-alt}
2760
2761 [module/eth]
2762 type = internal/network
2763 interface =
2764 interval = 3.0
2765
2766 format-connected-underline = #55aa55
2767 format-connected-prefix = " "
2768 format-connected-prefix-foreground = ${colors.foreground-alt}
2769 label-connected = %local_ip%
2770
2771 format-disconnected =
2772 ;format-disconnected = <label-disconnected>
2773 ;format-disconnected-underline = ${self.format-connected-underline}
2774 ;label-disconnected = %ifname% disconnected
2775 ;label-disconnected-foreground = ${colors.foreground-alt}
2776
2777 [module/date]
2778 type = internal/date
2779 interval = 5
2780
2781 date =
2782 date-alt = " %Y-%m-%d"
2783
2784 time = %H:%M
2785 time-alt = %H:%M:%S
2786
2787 format-prefix = 
2788 format-prefix-foreground = ${colors.foreground-alt}
2789 format-underline = #0a6cf5
2790
2791 label = %date% %time%
2792
2793 [module/volume]
2794 type = internal/volume
2795
2796 format-volume = <label-volume> <bar-volume>
2797 label-volume = vol
2798 label-volume-foreground = ${root.foreground}
2799
2800 format-muted-prefix = " "
2801 format-muted-foreground = ${colors.foreground-alt}
2802 label-muted = mute
2803
2804 bar-volume-width = 10
2805 bar-volume-foreground-0 = #55aa55
2806 bar-volume-foreground-1 = #55aa55
2807 bar-volume-foreground-2 = #55aa55
2808 bar-volume-foreground-3 = #55aa55
2809 bar-volume-foreground-4 = #55aa55
2810 bar-volume-foreground-5 = #f5a70a
2811 bar-volume-foreground-6 = #ff5555
2812 bar-volume-gradient = false
2813 bar-volume-indicator = |
2814 bar-volume-indicator-font = 2
2815 bar-volume-fill = ─
2816 bar-volume-fill-font = 2
2817 bar-volume-empty = ─
2818 bar-volume-empty-font = 2
2819 bar-volume-empty-foreground = ${colors.foreground-alt}
2820
2821 [module/battery]
2822 type = internal/battery
2823 battery = BAT0
2824 adapter = ADP1
2825 full-at = 64
2826
2827 format-charging = <animation-charging> <label-charging>
2828 format-charging-underline = #ffb52a
2829
2830 format-discharging = <ramp-capacity> <label-discharging>
2831 format-discharging-underline = ${self.format-charging-underline}
2832
2833 format-full-prefix = " "
2834 format-full-prefix-foreground = ${colors.foreground-alt}
2835 format-full-underline = ${self.format-charging-underline}
2836
2837 ramp-capacity-0 = 
2838 ramp-capacity-1 = 
2839 ramp-capacity-2 = 
2840 ramp-capacity-foreground = ${colors.foreground-alt}
2841
2842 animation-charging-0 = 
2843 animation-charging-1 = 
2844 animation-charging-2 = 
2845 animation-charging-foreground = ${colors.foreground-alt}
2846 animation-charging-framerate = 750
2847
2848 [module/temperature]
2849 type = internal/temperature
2850 thermal-zone = 1
2851 warn-temperature = 66
2852
2853 format = <ramp> <label>
2854 format-underline = #f50a4d
2855 format-warn = <ramp> <label-warn>
2856 format-warn-underline = ${self.format-underline}
2857
2858 label = %temperature%
2859 label-warn = %temperature%
2860 label-warn-foreground = ${colors.secondary}
2861
2862 ramp-0 = 
2863 ramp-1 = 
2864 ramp-2 = 
2865 ramp-foreground = ${colors.foreground-alt}
2866
2867 [module/powermenu]
2868 type = custom/menu
2869
2870 format-spacing = 1
2871
2872 label-open = 
2873 label-open-foreground = ${colors.secondary}
2874 label-close =  cancel
2875 label-close-foreground = ${colors.secondary}
2876 label-separator = |
2877 label-separator-foreground = ${colors.foreground-alt}
2878
2879 menu-0-0 = reboot
2880 menu-0-0-exec = menu-open-1
2881 menu-0-1 = power off
2882 menu-0-1-exec = menu-open-2
2883
2884 menu-1-0 = cancel
2885 menu-1-0-exec = menu-open-0
2886 menu-1-1 = reboot
2887 menu-1-1-exec = sudo reboot
2888
2889 menu-2-0 = power off
2890 menu-2-0-exec = sudo poweroff
2891 menu-2-1 = cancel
2892 menu-2-1-exec = menu-open-0
2893
2894 [module/mail]
2895 type = custom/script
2896 interval = 60
2897 format = <label>
2898 format-prefix = " "
2899 format-prefix-foreground = ${colors.foreground-alt}
2900 format-underline = #0a6cf5
2901 exec = notmuch count tag:unread
2902
2903 [settings]
2904 screenchange-reload = true
2905 ;compositing-background = xor
2906 ;compositing-background = screen
2907 ;compositing-foreground = source
2908 ;compositing-border = over
2909
2910 [global/wm]
2911 margin-top = 0
2912 margin-bottom = 0
2913
2914 ; vim:ft=dosini
2915 #+end_src
2916
2917 *** polybar-launch
2918 :PROPERTIES:
2919 :header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
2920 :END:
2921
2922 #+begin_src sh :tangle no
2923 # Terminate already running bar instances
2924 killall -q polybar
2925
2926 # Wait until the processes have been shut down
2927 while pgrep -x polybar >/dev/null; do sleep 1; done
2928
2929 # Launch main bar
2930 polybar main &
2931
2932 echo "Bars launched..."
2933 #+end_src
2934
2935 ** PowerTOP
2936 :PROPERTIES:
2937 :header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
2938 :END:
2939
2940 #+begin_src conf
2941 [Unit]
2942 Description=Powertop tunings
2943
2944 [Service]
2945 ExecStart=/usr/bin/powertop --auto-tune
2946 RemainAfterExit=true
2947
2948 [Install]
2949 WantedBy=multi-user.target
2950 #+end_src
2951
2952 ** ranger
2953
2954 *** rc.conf
2955 :PROPERTIES:
2956 :header-args+: :tangle ~/.config/ranger/rc.conf
2957 :END:
2958
2959 #+begin_src conf :tangle no
2960 # ===================================================================
2961 # This file contains the default startup commands for ranger.
2962 # To change them, it is recommended to create the file
2963 # ~/.config/ranger/rc.conf and add your custom commands there.
2964 #
2965 # If you copy this whole file there, you may want to set the environment
2966 # variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
2967 #
2968 # The purpose of this file is mainly to define keybindings and settings.
2969 # For running more complex python code, please create a plugin in "plugins/" or
2970 # a command in "commands.py".
2971 #
2972 # Each line is a command that will be run before the user interface
2973 # is initialized.  As a result, you can not use commands which rely
2974 # on the UI such as :delete or :mark.
2975 # ===================================================================
2976
2977 # ===================================================================
2978 # == Options
2979 # ===================================================================
2980
2981 # How many columns are there, and what are their relative widths?
2982 set column_ratios 1,3,4
2983
2984 # Which files should be hidden? (regular expression)
2985 set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
2986
2987 # Show hidden files? You can toggle this by typing 'zh'
2988 set show_hidden false
2989
2990 # Ask for a confirmation when running the "delete" command?
2991 # Valid values are "always" (default), "never", "multiple"
2992 # With "multiple", ranger will ask only if you delete multiple files at once.
2993 set confirm_on_delete multiple
2994
2995 # Which script is used to generate file previews?
2996 # ranger ships with scope.sh, a script that calls external programs (see
2997 # README for dependencies) to preview images, archives, etc.
2998 set preview_script ~/.config/ranger/scope.sh
2999
3000 # Use the external preview script or display simple plain text previews?
3001 set use_preview_script true
3002
3003 # Open all images in this directory when running certain image viewers
3004 # like feh or sxiv?  You can still open selected files by marking them.
3005 set open_all_images true
3006
3007 # Be aware of version control systems and display information.
3008 set vcs_aware false
3009
3010 # State of the three backends git, hg, bzr. The possible states are
3011 # disabled, local (only show local info), enabled (show local and remote
3012 # information).
3013 set vcs_backend_git enabled
3014 set vcs_backend_hg disabled
3015 set vcs_backend_bzr disabled
3016
3017 # Preview images in full color with the external command "w3mimgpreview"?
3018 # This requires the console web browser "w3m" and a supported terminal.
3019 # It has been successfully tested with "xterm" and "urxvt" without tmux.
3020 set preview_images true
3021
3022 # Use a unicode "..." character to mark cut-off filenames?
3023 set unicode_ellipsis false
3024
3025 # Show dotfiles in the bookmark preview box?
3026 set show_hidden_bookmarks true
3027
3028 # Which colorscheme to use?  These colorschemes are available by default:
3029 # default, jungle, snow
3030 set colorscheme default
3031
3032 # Preview files on the rightmost column?
3033 # And collapse (shrink) the last column if there is nothing to preview?
3034 set preview_files true
3035 set preview_directories true
3036 set collapse_preview true
3037
3038 # Save the console history on exit?
3039 set save_console_history true
3040
3041 # Draw the status bar on top of the browser window (default: bottom)
3042 set status_bar_on_top false
3043
3044 # Draw a progress bar in the status bar which displays the average state of all
3045 # currently running tasks which support progress bars?
3046 set draw_progress_bar_in_status_bar true
3047
3048 # Draw borders around columns?
3049 set draw_borders true
3050
3051 # Display the directory name in tabs?
3052 set dirname_in_tabs false
3053
3054 # Enable the mouse support?
3055 set mouse_enabled true
3056
3057 # Display the file size in the main column or status bar?
3058 set display_size_in_main_column true
3059 set display_size_in_status_bar true
3060
3061 # Display files tags in all columns or only in main column?
3062 set display_tags_in_all_columns true
3063
3064 # Set a title for the window?
3065 set update_title false
3066
3067 # Set the title to "ranger" in the tmux program?
3068 set update_tmux_title false
3069
3070 # Shorten the title if it gets long?  The number defines how many
3071 # directories are displayed at once, 0 turns off this feature.
3072 set shorten_title 3
3073
3074 # Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
3075 set tilde_in_titlebar false
3076
3077 # How many directory-changes or console-commands should be kept in history?
3078 set max_history_size 20
3079 set max_console_history_size 50
3080
3081 # Try to keep so much space between the top/bottom border when scrolling:
3082 set scroll_offset 8
3083
3084 # Flush the input after each key hit?  (Noticable when ranger lags)
3085 set flushinput true
3086
3087 # Padding on the right when there's no preview?
3088 # This allows you to click into the space to run the file.
3089 set padding_right true
3090
3091 # Save bookmarks (used with mX and `X) instantly?
3092 # This helps to synchronize bookmarks between multiple ranger
3093 # instances but leads to *slight* performance loss.
3094 # When false, bookmarks are saved when ranger is exited.
3095 set autosave_bookmarks true
3096
3097 # You can display the "real" cumulative size of directories by using the
3098 # command :get_cumulative_size or typing "dc".  The size is expensive to
3099 # calculate and will not be updated automatically.  You can choose
3100 # to update it automatically though by turning on this option:
3101 set autoupdate_cumulative_size false
3102
3103 # Turning this on makes sense for screen readers:
3104 set show_cursor false
3105
3106 # One of: size, basename, mtime, type
3107 set sort natural
3108
3109 # Additional sorting options
3110 set sort_reverse false
3111 set sort_case_insensitive true
3112 set sort_directories_first true
3113
3114 # Enable this if key combinations with the Alt Key don't work for you.
3115 # (Especially on xterm)
3116 set xterm_alt_key false
3117
3118 # ===================================================================
3119 # == Local Options
3120 # ===================================================================
3121 # You can set local options that only affect a single directory.
3122
3123 # Examples:
3124 # setlocal path=~/downloads sort mtime
3125
3126 # ===================================================================
3127 # == Command Aliases in the Console
3128 # ===================================================================
3129
3130 alias e    edit
3131 alias q    quit
3132 alias q!   quitall
3133 alias qall quitall
3134 alias setl setlocal
3135
3136 alias filter     scout -prt
3137 alias find       scout -aet
3138 alias mark       scout -mr
3139 alias unmark     scout -Mr
3140 alias search     scout -rs
3141 alias search_inc scout -rts
3142 alias travel     scout -aefiklst
3143
3144 # ===================================================================
3145 # == Define keys for the browser
3146 # ===================================================================
3147
3148 # Basic
3149 map     Q quit!
3150 map     q quit
3151 copymap q ZZ ZQ
3152
3153 map R     reload_cwd
3154 map <C-r> reset
3155 map <C-l> redraw_window
3156 map <C-c> abort
3157 map <esc> change_mode normal
3158
3159 map i display_file
3160 map ? help
3161 map W display_log
3162 map w taskview_open
3163 map S shell $SHELL
3164
3165 map :  console
3166 map ;  console
3167 map !  console shell
3168 map @  console -p6 shell  %%s
3169 map #  console shell -p
3170 map s  console shell
3171 map r  chain draw_possible_programs; console open_with
3172 map f  console find
3173 map cd console cd
3174
3175 # Tagging / Marking
3176 map t       tag_toggle
3177 map ut      tag_remove
3178 map "<any>  tag_toggle tag=%any
3179 map <Space> mark_files toggle=True
3180 map v       mark_files all=True toggle=True
3181 map uv      mark_files all=True val=False
3182 map V       toggle_visual_mode
3183 map uV      toggle_visual_mode reverse=True
3184
3185 # For the nostalgics: Midnight Commander bindings
3186 map <F1> help
3187 map <F3> display_file
3188 map <F4> edit
3189 map <F5> copy
3190 map <F6> cut
3191 map <F7> console mkdir
3192 map <F8> console delete
3193 map <F10> exit
3194
3195 # In case you work on a keyboard with dvorak layout
3196 map <UP>       move up=1
3197 map <DOWN>     move down=1
3198 map <LEFT>     move left=1
3199 map <RIGHT>    move right=1
3200 map <HOME>     move to=0
3201 map <END>      move to=-1
3202 map <PAGEDOWN> move down=1   pages=True
3203 map <PAGEUP>   move up=1     pages=True
3204 map <CR>       move right=1
3205 map <DELETE>   console delete
3206 map <INSERT>   console touch
3207
3208 # VIM-like
3209 copymap <UP>       k
3210 copymap <DOWN>     j
3211 copymap <LEFT>     h
3212 copymap <RIGHT>    l
3213 copymap <HOME>     gg
3214 copymap <END>      G
3215 copymap <PAGEDOWN> <C-F>
3216 copymap <PAGEUP>   <C-B>
3217
3218 map J  move down=0.5  pages=True
3219 map K  move up=0.5    pages=True
3220 copymap J <C-D>
3221 copymap K <C-U>
3222
3223 # Jumping around
3224 map H     history_go -1
3225 map L     history_go 1
3226 map ]     move_parent 1
3227 map [     move_parent -1
3228 map }     traverse
3229
3230 map gh cd ~
3231 map ge cd /etc
3232 map gu cd /usr
3233 map gd cd /dev
3234 map gl cd -r .
3235 map gL cd -r %f
3236 map go cd /opt
3237 map gv cd /var
3238 map gm cd /media
3239 map gM cd /mnt
3240 map gs cd /srv
3241 map gr cd /
3242 map gR eval fm.cd(ranger.RANGERDIR)
3243 map g/ cd /
3244 map g? cd /usr/share/doc/ranger
3245
3246 # External Programs
3247 map E  edit
3248 map du shell -p du --max-depth=1 -h --apparent-size
3249 map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
3250 map yp shell -d echo -n %d/%f | xsel -i
3251 map yd shell -d echo -n %d    | xsel -i
3252 map yn shell -d echo -n %f    | xsel -i
3253
3254 # Filesystem Operations
3255 map =  chmod
3256
3257 map cw console rename
3258 map A  eval fm.open_console('rename ' + fm.thisfile.basename)
3259 map I  eval fm.open_console('rename ' + fm.thisfile.basename, position=7)
3260
3261 map pp paste
3262 map po paste overwrite=True
3263 map pl paste_symlink relative=False
3264 map pL paste_symlink relative=True
3265 map phl paste_hardlink
3266 map pht paste_hardlinked_subtree
3267
3268 map dd cut
3269 map ud uncut
3270 map da cut mode=add
3271 map dr cut mode=remove
3272
3273 map yy copy
3274 map uy uncut
3275 map ya copy mode=add
3276 map yr copy mode=remove
3277
3278 # Temporary workarounds
3279 map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
3280 map dG  eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
3281 map dj  eval fm.cut(dirarg=dict(down=1), narg=quantifier)
3282 map dk  eval fm.cut(dirarg=dict(up=1), narg=quantifier)
3283 map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
3284 map yG  eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
3285 map yj  eval fm.copy(dirarg=dict(down=1), narg=quantifier)
3286 map yk  eval fm.copy(dirarg=dict(up=1), narg=quantifier)
3287
3288 # Searching
3289 map /  console search
3290 map n  search_next
3291 map N  search_next forward=False
3292 map ct search_next order=tag
3293 map cs search_next order=size
3294 map ci search_next order=mimetype
3295 map cc search_next order=ctime
3296 map cm search_next order=mtime
3297 map ca search_next order=atime
3298
3299 # Tabs
3300 map <C-n>     tab_new ~
3301 map <C-w>     tab_close
3302 map <TAB>     tab_move 1
3303 map <S-TAB>   tab_move -1
3304 map <A-Right> tab_move 1
3305 map <A-Left>  tab_move -1
3306 map gt        tab_move 1
3307 map gT        tab_move -1
3308 map gn        tab_new ~
3309 map gc        tab_close
3310 map uq        tab_restore
3311 map <a-1>     tab_open 1
3312 map <a-2>     tab_open 2
3313 map <a-3>     tab_open 3
3314 map <a-4>     tab_open 4
3315 map <a-5>     tab_open 5
3316 map <a-6>     tab_open 6
3317 map <a-7>     tab_open 7
3318 map <a-8>     tab_open 8
3319 map <a-9>     tab_open 9
3320
3321 # Sorting
3322 map or toggle_option sort_reverse
3323 map os chain set sort=size;      set sort_reverse=False
3324 map ob chain set sort=basename;  set sort_reverse=False
3325 map on chain set sort=natural;   set sort_reverse=False
3326 map om chain set sort=mtime;     set sort_reverse=False
3327 map oc chain set sort=ctime;     set sort_reverse=False
3328 map oa chain set sort=atime;     set sort_reverse=False
3329 map ot chain set sort=type;      set sort_reverse=False
3330
3331 map oS chain set sort=size;      set sort_reverse=True
3332 map oB chain set sort=basename;  set sort_reverse=True
3333 map oN chain set sort=natural;   set sort_reverse=True
3334 map oM chain set sort=mtime;     set sort_reverse=True
3335 map oC chain set sort=ctime;     set sort_reverse=True
3336 map oA chain set sort=atime;     set sort_reverse=True
3337 map oT chain set sort=type;      set sort_reverse=True
3338
3339 map dc get_cumulative_size
3340
3341 # Settings
3342 map zc    toggle_option collapse_preview
3343 map zd    toggle_option sort_directories_first
3344 map zh    toggle_option show_hidden
3345 map <C-h> toggle_option show_hidden
3346 map zi    toggle_option flushinput
3347 map zm    toggle_option mouse_enabled
3348 map zp    toggle_option preview_files
3349 map zP    toggle_option preview_directories
3350 map zs    toggle_option sort_case_insensitive
3351 map zu    toggle_option autoupdate_cumulative_size
3352 map zv    toggle_option use_preview_script
3353 map zf    console filter
3354
3355 # Bookmarks
3356 map `<any>  enter_bookmark %any
3357 map '<any>  enter_bookmark %any
3358 map m<any>  set_bookmark %any
3359 map um<any> unset_bookmark %any
3360
3361 map m<bg>   draw_bookmarks
3362 copymap m<bg>  um<bg> `<bg> '<bg>
3363
3364 # Generate all the chmod bindings with some python help:
3365 eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
3366 eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
3367 eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
3368 eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
3369 eval for arg in "rwxXst": cmd("map +{0}  shell -d chmod u+{0} %s".format(arg))
3370
3371 eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
3372 eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
3373 eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
3374 eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
3375 eval for arg in "rwxXst": cmd("map -{0}  shell -d chmod u-{0} %s".format(arg))
3376
3377 # ===================================================================
3378 # == Define keys for the console
3379 # ===================================================================
3380 # Note: Unmapped keys are passed directly to the console.
3381
3382 # Basic
3383 cmap <tab>   eval fm.ui.console.tab()
3384 cmap <s-tab> eval fm.ui.console.tab(-1)
3385 cmap <ESC>   eval fm.ui.console.close()
3386 cmap <CR>    eval fm.ui.console.execute()
3387 cmap <C-l>   redraw_window
3388
3389 copycmap <ESC> <C-c>
3390 copycmap <CR>  <C-j>
3391
3392 # Move around
3393 cmap <up>    eval fm.ui.console.history_move(-1)
3394 cmap <down>  eval fm.ui.console.history_move(1)
3395 cmap <left>  eval fm.ui.console.move(left=1)
3396 cmap <right> eval fm.ui.console.move(right=1)
3397 cmap <home>  eval fm.ui.console.move(right=0, absolute=True)
3398 cmap <end>   eval fm.ui.console.move(right=-1, absolute=True)
3399
3400 # Line Editing
3401 cmap <backspace>  eval fm.ui.console.delete(-1)
3402 cmap <delete>     eval fm.ui.console.delete(0)
3403 cmap <C-w>        eval fm.ui.console.delete_word()
3404 cmap <C-k>        eval fm.ui.console.delete_rest(1)
3405 cmap <C-u>        eval fm.ui.console.delete_rest(-1)
3406 cmap <C-y>        eval fm.ui.console.paste()
3407
3408 # And of course the emacs way
3409 copycmap <up>        <C-p>
3410 copycmap <down>      <C-n>
3411 copycmap <left>      <C-b>
3412 copycmap <right>     <C-f>
3413 copycmap <home>      <C-a>
3414 copycmap <end>       <C-e>
3415 copycmap <delete>    <C-d>
3416 copycmap <backspace> <C-h>
3417
3418 # Note: There are multiple ways to express backspaces.  <backspace> (code 263)
3419 # and <backspace2> (code 127).  To be sure, use both.
3420 copycmap <backspace> <backspace2>
3421
3422 # This special expression allows typing in numerals:
3423 cmap <allow_quantifiers> false
3424
3425 # ===================================================================
3426 # == Pager Keybindings
3427 # ===================================================================
3428
3429 # Movement
3430 pmap  <down>      pager_move  down=1
3431 pmap  <up>        pager_move  up=1
3432 pmap  <left>      pager_move  left=4
3433 pmap  <right>     pager_move  right=4
3434 pmap  <home>      pager_move  to=0
3435 pmap  <end>       pager_move  to=-1
3436 pmap  <pagedown>  pager_move  down=1.0  pages=True
3437 pmap  <pageup>    pager_move  up=1.0    pages=True
3438 pmap  <C-d>       pager_move  down=0.5  pages=True
3439 pmap  <C-u>       pager_move  up=0.5    pages=True
3440
3441 copypmap <UP>       k  <C-p>
3442 copypmap <DOWN>     j  <C-n> <CR>
3443 copypmap <LEFT>     h
3444 copypmap <RIGHT>    l
3445 copypmap <HOME>     g
3446 copypmap <END>      G
3447 copypmap <C-d>      d
3448 copypmap <C-u>      u
3449 copypmap <PAGEDOWN> n  f  <C-F>  <Space>
3450 copypmap <PAGEUP>   p  b  <C-B>
3451
3452 # Basic
3453 pmap     <ESC> pager_close
3454 copypmap <ESC> q Q i <F3>
3455 pmap E      edit_file
3456
3457 # ===================================================================
3458 # == Taskview Keybindings
3459 # ===================================================================
3460
3461 # Movement
3462 tmap <up>        taskview_move up=1
3463 tmap <down>      taskview_move down=1
3464 tmap <home>      taskview_move to=0
3465 tmap <end>       taskview_move to=-1
3466 tmap <pagedown>  taskview_move down=1.0  pages=True
3467 tmap <pageup>    taskview_move up=1.0    pages=True
3468 tmap <C-d>       taskview_move down=0.5  pages=True
3469 tmap <C-u>       taskview_move up=0.5    pages=True
3470
3471 copytmap <UP>       k  <C-p>
3472 copytmap <DOWN>     j  <C-n> <CR>
3473 copytmap <HOME>     g
3474 copytmap <END>      G
3475 copytmap <C-u>      u
3476 copytmap <PAGEDOWN> n  f  <C-F>  <Space>
3477 copytmap <PAGEUP>   p  b  <C-B>
3478
3479 # Changing priority and deleting tasks
3480 tmap J          eval -q fm.ui.taskview.task_move(-1)
3481 tmap K          eval -q fm.ui.taskview.task_move(0)
3482 tmap dd         eval -q fm.ui.taskview.task_remove()
3483 tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
3484 tmap <pageup>   eval -q fm.ui.taskview.task_move(0)
3485 tmap <delete>   eval -q fm.ui.taskview.task_remove()
3486
3487 # Basic
3488 tmap <ESC> taskview_close
3489 copytmap <ESC> q Q w <C-c>
3490 #+end_src
3491
3492 *** scope.sh
3493 :PROPERTIES:
3494 :header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
3495 :END:
3496
3497 #+begin_src sh :tangle no
3498 # ranger supports enhanced previews.  If the option "use_preview_script"
3499 # is set to True and this file exists, this script will be called and its
3500 # output is displayed in ranger.  ANSI color codes are supported.
3501
3502 # NOTES: This script is considered a configuration file.  If you upgrade
3503 # ranger, it will be left untouched. (You must update it yourself.)
3504 # Also, ranger disables STDIN here, so interactive scripts won't work properly
3505
3506 # Meanings of exit codes:
3507 # code | meaning    | action of ranger
3508 # -----+------------+-------------------------------------------
3509 # 0    | success    | success. display stdout as preview
3510 # 1    | no preview | failure. display no preview at all
3511 # 2    | plain text | display the plain content of the file
3512 # 3    | fix width  | success. Don't reload when width changes
3513 # 4    | fix height | success. Don't reload when height changes
3514 # 5    | fix both   | success. Don't ever reload
3515
3516 # Meaningful aliases for arguments:
3517 path="$1"    # Full path of the selected file
3518 width="$2"   # Width of the preview pane (number of fitting characters)
3519 height="$3"  # Height of the preview pane (number of fitting characters)
3520
3521 maxln=200    # Stop after $maxln lines.  Can be used like ls | head -n $maxln
3522
3523 # Find out something about the file:
3524 mimetype=$(file --mime-type -Lb "$path")
3525 extension=${path##*.}
3526
3527 # Functions:
3528 # runs a command and saves its output into $output.  Useful if you need
3529 # the return value AND want to use the output in a pipe
3530 try() { output=$(eval '"$@"'); }
3531
3532 # writes the output of the previouosly used "try" command
3533 dump() { echo "$output"; }
3534
3535 # a common post-processing function used after most commands
3536 trim() { head -n "$maxln"; }
3537
3538 # wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
3539 highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }
3540
3541 case "$extension" in
3542     # Archive extensions:
3543     7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
3544     rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
3545         try als "$path" && { dump | trim; exit 0; }
3546         try acat "$path" && { dump | trim; exit 3; }
3547         try bsdtar -lf "$path" && { dump | trim; exit 0; }
3548         exit 1;;
3549     rar)
3550         try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
3551     # PDF documents:
3552     pdf)
3553         try pdftotext -l 10 -nopgbrk -q "$path" - && \
3554             { dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
3555     # BitTorrent Files
3556     torrent)
3557         try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
3558     # HTML Pages:
3559     htm|html|xhtml)
3560         try w3m    -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3561         try lynx   -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3562         try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3563         ;; # fall back to highlight/cat if the text browsers fail
3564 esac
3565
3566 case "$mimetype" in
3567     # Syntax highlight for text files:
3568     text/* | */xml)
3569         try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
3570     # Ascii-previews of images:
3571     image/*)
3572         img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
3573     # Display information about media files:
3574     video/* | audio/*)
3575         exiftool "$path" && exit 5
3576         # Use sed to remove spaces so the output fits into the narrow window
3577         try mediainfo "$path" && { dump | trim | sed 's/  \+:/: /;';  exit 5; } || exit 1;;
3578 esac
3579
3580 exit 1
3581 #+end_src
3582
3583 ** redshift
3584 :PROPERTIES:
3585 :header-args+: :tangle ~/.config/redshift.conf :comments none
3586 :END:
3587
3588 #+begin_src conf
3589 ; Global settings for redshift
3590 [redshift]
3591 ; Set the day and night screen temperatures (Neutral is 6500K)
3592 ;temp-day=5700
3593 ;temp-night=3500
3594
3595 ;temp-day=6500
3596 temp-day=6200
3597 ;temp-night=4800
3598 ;temp-night=5000
3599 ;temp-night=4500
3600 temp-night=4000
3601
3602 ; Enable/Disable a smooth transition between day and night
3603 ; 0 will cause a direct change from day to night screen temperature.
3604 ; 1 will gradually increase or decrease the screen temperature.
3605 transition=1
3606
3607 ; Set the screen brightness. Default is 1.0.
3608 ;brightness=0.9
3609 ; It is also possible to use different settings for day and night
3610 ; since version 1.8.
3611 ;brightness-day=0.7
3612 ;brightness-night=0.4
3613 ; Set the screen gamma (for all colors, or each color channel
3614 ; individually)
3615 ;gamma=0.8
3616 ;gamma=1.0
3617 ;gamma=0.8:0.7:0.8
3618 ; This can also be set individually for day and night since
3619 ; version 1.10.
3620 ;gamma-day=0.8:0.7:0.8
3621 ;gamma-night=0.6
3622
3623 ; Set the location-provider: 'geoclue2' or 'manual'
3624 ; type 'redshift -l list' to see possible values.
3625 ; The location provider settings are in a different section.
3626 ;location-provider=manual
3627 location-provider=geoclue2
3628
3629 ; Set the adjustment-method: 'randr', 'vidmode'
3630 ; type 'redshift -m list' to see all possible values.
3631 ; 'randr' is the preferred method, 'vidmode' is an older API.
3632 ; but works in some cases when 'randr' does not.
3633 ; The adjustment method settings are in a different section.
3634 adjustment-method=randr
3635
3636 ; Configuration of the location-provider:
3637 ; type 'redshift -l PROVIDER:help' to see the settings.
3638 ; ex: 'redshift -l manual:help'
3639 ; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
3640 ; are negative numbers.
3641 ;[manual]
3642 ;lat=48.1
3643 ;lon=11.6
3644
3645 ; Configuration of the adjustment-method
3646 ; type 'redshift -m METHOD:help' to see the settings.
3647 ; ex: 'redshift -m randr:help'
3648 ; In this example, randr is configured to adjust screen 1.
3649 ; Note that the numbering starts from 0, so this is actually the
3650 ; second screen. If this option is not specified, Redshift will try
3651 ; to adjust _all_ screens.
3652 ;[randr]
3653 ;screen=1
3654 #+end_src
3655
3656 ** rofi
3657 :PROPERTIES:
3658 :header-args+: :tangle ~/.config/rofi/config
3659 :END:
3660
3661 #+begin_src conf
3662 ! rofi.font: Ubuntu Mono 13
3663 ! rofi.font: Inconsolata 16
3664 ! rofi.font: Iosevka 13
3665 ! rofi.font: Source Code Pro 11
3666 rofi.font: Source Code Pro 10.5
3667 rofi.modi: run,window
3668 ! rofi.width: 640
3669 rofi.width: 600
3670 !rofi.location: 2
3671 !rofi.yoffset: 200
3672 rofi.monitor: -1
3673 !rofi.lines: 10
3674
3675 !rofi.theme: /usr/share/rofi/themes//Arc.rasi
3676 !rofi.theme: /usr/share/rofi/themes//Paper.rasi
3677 !rofi.theme: /usr/share/rofi/themes//sidebar.rasi
3678
3679 rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
3680 #+end_src
3681
3682 ** rofi-pass
3683 :PROPERTIES:
3684 :header-args+: :tangle ~/.config/rofi-pass/config
3685 :END:
3686
3687 #+begin_src conf
3688 # permanently set alternative root dir
3689 # root=/path/to/root
3690
3691 # rofi command. Make sure to have "$@" as last argument
3692 _rofi () {
3693     #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
3694     rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
3695 }
3696
3697 # xdotool needs the keyboard layout to be set using setxkbmap
3698 # You can do this in your autostart scripts (e.g. xinitrc)
3699
3700 # If for some reason, you cannot do this, you can set the command here.
3701 # and set fix_layout to true
3702 fix_layout=false
3703
3704 layout_cmd () {
3705   setxkbmap us
3706 }
3707
3708 # fields to be used
3709 URL_field='url'
3710 USERNAME_field='user'
3711 AUTOTYPE_field='autotype'
3712
3713 # delay to be used for :delay keyword
3714 delay=2
3715
3716 ## Programs to be used
3717 # Editor
3718 EDITOR='gvim -f'
3719
3720 # Browser
3721 BROWSER='chromium'
3722
3723 ## Misc settings
3724
3725 default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
3726 auto_enter='false'
3727 notify='false'
3728 default_autotype='user :tab pass'
3729
3730 # color of the help messages
3731 # leave empty for autodetection
3732 help_color="#4872FF"
3733
3734 # Clipboard settings
3735 # Possible options: primary, clipboard, both
3736 clip=primary
3737
3738 # Options for generating new password entries
3739 # default_user is also used for password files that have no user field.
3740 default_user=aminb
3741 default_user2=aminban
3742 password_length=30
3743
3744 # Custom Keybindings
3745 #autotype="Alt+1"
3746 autotype="Alt+m"
3747 type_user="Alt+2"
3748 type_pass="Alt+3"
3749 open_url="Alt+4"
3750 copy_name="Alt+u"
3751 copy_url="Alt+l"
3752 copy_pass="Alt+p"
3753 show="Alt+o"
3754 copy_entry="Alt+2"
3755 type_entry="Alt+1"
3756 copy_menu="Alt+c"
3757 action_menu="Alt+a"
3758 type_menu="Alt+t"
3759 help="Alt+h"
3760 switch="Alt+x"
3761 insert_pass="Alt+n"
3762 #+end_src
3763
3764 ** sway
3765
3766 *** main
3767 :PROPERTIES:
3768 :header-args+: :tangle ~/.config/sway/config
3769 :END:
3770
3771 #+begin_src conf
3772 ### Variables
3773 # super
3774 set $mod Mod4
3775 # alt
3776 set $mod2 Mod1
3777 set $left h
3778 set $down j
3779 set $up k
3780 set $right l
3781 set $term urxvt
3782 set $menu rofi -show run -display-run '> ' -display-window ' 🗔 '
3783
3784 ### Output configuration
3785 #
3786 # Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/)
3787 output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
3788 #
3789 # Example configuration:
3790 #
3791 #   output HDMI-A-1 resolution 1920x1080 position 1920,0
3792 #
3793 # You can get the names of your outputs by running: swaymsg -t get_outputs
3794
3795 ### Idle configuration
3796
3797 exec swayidle \
3798    timeout 120  '[ -f ~/.nosleep ] || swaymsg "output * dpms off"' \
3799         resume  '[ -f ~/.nosleep ] || swaymsg "output * dpms on"'  \
3800    before-sleep swaylock
3801
3802
3803 ### Key bindings
3804 #
3805 # Basics:
3806 #
3807     # start a terminal
3808     bindsym $mod+Return exec $term
3809
3810     # kill focused window
3811     bindsym $mod+Shift+q kill
3812
3813     # start your launcher
3814     bindsym $mod+d exec $menu
3815
3816     # password manager
3817     bindsym $mod2+space exec rofi-pass
3818
3819     # Drag floating windows by holding down $mod and left mouse button.
3820     # Resize them with right mouse button + $mod.
3821     # Despite the name, also works for non-floating windows.
3822     # Change normal to inverse to use left mouse button for resizing and right
3823     # mouse button for dragging.
3824     floating_modifier $mod normal
3825
3826     # reload the configuration file
3827     bindsym $mod+Shift+c reload
3828
3829     # exit sway (logs you out of your wayland session)
3830     bindsym $mod+Shift+e exit
3831
3832     bindsym $mod+apostrophe exec rofi-light        # rofi-based brightness chooser
3833     bindsym XF86MonBrightnessUp exec light -A 5    # increase screen brightness
3834     bindsym XF86MonBrightnessDown exec light -U 5  # decrease screen brightness
3835
3836     bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
3837     bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
3838     bindsym XF86AudioMute exec pamixer --toggle-mute
3839     bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
3840
3841     # original sway workspace switch and window move
3842     bindsym $mod+bracketleft workspace prev
3843     bindsym $mod+bracketright workspace next
3844     bindsym $mod+braceleft move container to workspace prev
3845     bindsym $mod+braceright move container to workspace next
3846
3847     # bspwm-esque workspace switch and window move
3848     bindsym $mod2+bracketleft exec sway-ws-util switch prev
3849     bindsym $mod2+bracketright exec sway-ws-util switch next
3850     bindsym $mod2+braceleft exec sway-ws-util move prev follow
3851     bindsym $mod2+braceright exec sway-ws-util move next follow
3852 #
3853 # Moving around:
3854 #
3855     # Move your focus around
3856     bindsym $mod+$left focus left
3857     bindsym $mod+$down focus down
3858     bindsym $mod+$up focus up
3859     bindsym $mod+$right focus right
3860     # or use $mod+[up|down|left|right]
3861     bindsym $mod+Left focus left
3862     bindsym $mod+Down focus down
3863     bindsym $mod+Up focus up
3864     bindsym $mod+Right focus right
3865
3866     # _move_ the focused window with the same, but add Shift
3867     bindsym $mod+Shift+$left move left
3868     bindsym $mod+Shift+$down move down
3869     bindsym $mod+Shift+$up move up
3870     bindsym $mod+Shift+$right move right
3871     # ditto, with arrow keys
3872     bindsym $mod+Shift+Left move left
3873     bindsym $mod+Shift+Down move down
3874     bindsym $mod+Shift+Up move up
3875     bindsym $mod+Shift+Right move right
3876 #
3877 # Workspaces:
3878 #
3879     # switch to workspace
3880     bindsym $mod+1 workspace 1
3881     bindsym $mod+2 workspace 2
3882     bindsym $mod+3 workspace 3
3883     bindsym $mod+4 workspace 4
3884     bindsym $mod+5 workspace 5
3885     bindsym $mod+6 workspace 6
3886     bindsym $mod+7 workspace 7
3887     bindsym $mod+8 workspace 8
3888     bindsym $mod+9 workspace 9
3889     bindsym $mod+0 workspace 10
3890     # move focused container to workspace
3891     bindsym $mod+Shift+1 move container to workspace 1
3892     bindsym $mod+Shift+2 move container to workspace 2
3893     bindsym $mod+Shift+3 move container to workspace 3
3894     bindsym $mod+Shift+4 move container to workspace 4
3895     bindsym $mod+Shift+5 move container to workspace 5
3896     bindsym $mod+Shift+6 move container to workspace 6
3897     bindsym $mod+Shift+7 move container to workspace 7
3898     bindsym $mod+Shift+8 move container to workspace 8
3899     bindsym $mod+Shift+9 move container to workspace 9
3900     bindsym $mod+Shift+0 move container to workspace 10
3901     # Note: workspaces can have any name you want, not just numbers.
3902     # We just use 1-10 as the default.
3903 #
3904 # Layout stuff:
3905 #
3906     # You can "split" the current object of your focus with
3907     # $mod+b or $mod+v, for horizontal and vertical splits
3908     # respectively.
3909     bindsym $mod+b splith
3910     bindsym $mod+v splitv
3911
3912     # Switch the current container between different layout styles
3913     bindsym $mod+s layout stacking
3914     bindsym $mod+w layout tabbed
3915     bindsym $mod+e layout toggle split
3916
3917     # Make the current focus fullscreen
3918     bindsym $mod+f fullscreen
3919
3920     # Toggle the current focus between tiling and floating mode
3921     bindsym $mod+Shift+space floating toggle
3922
3923     # Swap focus between the tiling area and the floating area
3924     bindsym $mod+space focus mode_toggle
3925
3926     # move focus to the parent container
3927     bindsym $mod+a focus parent
3928 #
3929 # Scratchpad:
3930 #
3931     # Sway has a "scratchpad", which is a bag of holding for windows.
3932     # You can send windows there and get them back later.
3933
3934     # Move the currently focused window to the scratchpad
3935     bindsym $mod+Shift+minus move scratchpad
3936
3937     # Show the next scratchpad window or hide the focused scratchpad window.
3938     # If there are multiple scratchpad windows, this command cycles through them.
3939     bindsym $mod+minus scratchpad show
3940 #
3941 # Resizing containers:
3942 #
3943 mode "resize" {
3944     # left will shrink the containers width
3945     # right will grow the containers width
3946     # up will shrink the containers height
3947     # down will grow the containers height
3948     bindsym $left resize shrink width 10px
3949     bindsym $down resize grow height 10px
3950     bindsym $up resize shrink height 10px
3951     bindsym $right resize grow width 10px
3952
3953     # ditto, with arrow keys
3954     bindsym Left resize shrink width 10px
3955     bindsym Down resize grow height 10px
3956     bindsym Up resize shrink height 10px
3957     bindsym Right resize grow width 10px
3958
3959     # return to default mode
3960     bindsym Return mode "default"
3961     bindsym Escape mode "default"
3962 }
3963 bindsym $mod+Shift+r mode "resize"
3964
3965 #
3966 # Power button
3967 #
3968
3969 set $mode_system System (l)ock, (e)xit sway, (s)uspend, (h)ibernate, (r)eboot, (S)hutdown
3970 mode "$mode_system" {
3971     bindsym l       exec swaylock,              mode "default"
3972     bindsym e       exec swaymsg exit,          mode "default"
3973     bindsym s       exec systemctl suspend,     mode "default"
3974     bindsym h       exec systemctl hibernate,   mode "default"
3975     bindsym r       exec systemctl reboot,      mode "default"
3976     bindsym Shift+s exec systemctl poweroff -i, mode "default"
3977
3978     # back to normal: Enter, Escape, or q
3979     bindsym Return mode "default"
3980     bindsym Escape mode "default"
3981     bindsym q      mode "default"
3982 }
3983 bindsym XF86PowerOff mode "$mode_system"
3984
3985 #
3986 # Presentation mode
3987 #
3988
3989 bindsym $mod+$mod2+p exec ([ ! -e ~/.nosleep ] && touch ~/.nosleep || rm ~/.nosleep) && killall -USR1 i3status
3990
3991 #
3992 # Notifications
3993 #
3994
3995 bindsym $mod+Shift+n mode notifications
3996 mode notifications {
3997     bindsym Return  exec makoctl invoke; exec makoctl dismiss; mode default
3998     bindsym d       exec makoctl dismiss; mode default
3999     bindsym Shift+d exec makoctl dismiss -a; mode default
4000
4001     bindsym Escape mode default
4002     bindsym q      mode default
4003 }
4004
4005 #
4006 # Screenshotting
4007 #
4008
4009 bindsym $mod+Shift+s mode screenshot
4010 mode screenshot {
4011     bindsym a exec grim $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
4012     bindsym r exec slurp | grim -g - $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
4013
4014     bindsym Escape mode default
4015     bindsym q      mode default
4016 }
4017
4018 #
4019 # Status Bar:
4020 #
4021 # Read `man 5 sway-bar` for more information about this section.
4022 bar {
4023     position bottom
4024     colors {
4025         statusline #ffffff
4026         background #323232
4027         inactive_workspace #32323200 #32323200 #5c5c5c
4028     }
4029     status_command i3status | my-i3status.py
4030 }
4031
4032 # font pango: benis uushi 9
4033 # font pango: Ubuntu Mono 11
4034 # font pango: Inconsolata 11
4035 font pango: DejaVu Sans Mono 9
4036 # font pango: Liberation Mono 9
4037
4038 exec xrdb .Xresources
4039 exec pgrep -x "systemd-inhibit" || \
4040      systemd-inhibit --what=handle-power-key --who=aminb \
4041      --why="Handle power button in sway" sleep infinity
4042 exec mako 2>&1 >/tmp/mako.log
4043 exec /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
4044
4045 include /etc/sway/config.d/*
4046 include ~/.config/sway/`hostname`
4047
4048 exec systemd-notify --ready || true
4049
4050 #+end_src
4051
4052 *** langa
4053 :PROPERTIES:
4054 :header-args+: :tangle ~/.config/sway/langa
4055 :END:
4056
4057 #+begin_src conf
4058 input "2:7:SynPS/2_Synaptics_TouchPad" {
4059     events disabled
4060     dwt enabled
4061     tap enabled
4062     natural_scroll enabled
4063     click_method clickfinger
4064 }
4065
4066 input "1:1:AT_Translated_Set_2_keyboard" {
4067     repeat_delay 200
4068     repeat_rate 45
4069     xkb_layout us_ab,ir
4070     xkb_options ctrl:nocaps,altwin:swap_alt_win,grp:shifts_toggle
4071 }
4072 #+end_src
4073
4074 *** shemshak
4075 :PROPERTIES:
4076 :header-args+: :tangle ~/.config/sway/shemshak
4077 :END:
4078
4079 #+begin_src conf
4080 input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
4081     dwt enabled
4082     tap enabled
4083     natural_scroll enabled
4084     middle_emulation enabled
4085     click_method clickfinger
4086 }
4087
4088 input "1:1:AT_Translated_Set_2_keyboard" {
4089     repeat_delay 200
4090     repeat_rate 45
4091     xkb_layout us,ir
4092     xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
4093 }
4094 #+end_src
4095 ** swaylock
4096 :PROPERTIES:
4097 :header-args+: :tangle ~/.config/swaylock/config
4098 :END:
4099
4100 #+begin_src conf
4101 image=/home/amin/usr/pics/wp/wp2445784-blurred-wallpapers.jpg
4102 scaling=fill
4103 #+end_src
4104
4105 ** TLP
4106
4107 *** langa
4108
4109 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "langa")) "/sudo::/etc/default/tlp")
4110 # ------------------------------------------------------------------------------
4111 # tlp - Parameters for power saving
4112 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
4113
4114 # Hint: some features are disabled by default, remove the leading # to enable
4115 # them.
4116
4117 # Set to 0 to disable, 1 to enable TLP.
4118 TLP_ENABLE=1
4119
4120 # Operation mode when no power supply can be detected: AC, BAT.
4121 # Concerns some desktop and embedded hardware only.
4122 TLP_DEFAULT_MODE=AC
4123
4124 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
4125 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
4126 TLP_PERSISTENT_DEFAULT=0
4127
4128 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
4129 # Non-zero value enables, zero disables laptop mode.
4130 DISK_IDLE_SECS_ON_AC=0
4131 DISK_IDLE_SECS_ON_BAT=2
4132
4133 # Dirty page values (timeouts in secs).
4134 MAX_LOST_WORK_SECS_ON_AC=15
4135 MAX_LOST_WORK_SECS_ON_BAT=60
4136
4137 # Hint: CPU parameters below are disabled by default, remove the leading #
4138 # to enable them, otherwise kernel default values are used.
4139
4140 # Select a CPU frequency scaling governor.
4141 # Intel Core i processor with intel_pstate driver:
4142 #   powersave(*), performance.
4143 # Older hardware with acpi-cpufreq driver:
4144 #   ondemand(*), powersave, performance, conservative, schedutil.
4145 # (*) is recommended.
4146 # Hint: use tlp-stat -p to show the active driver and available governors.
4147 # Important:
4148 #   powersave for intel_pstate and ondemand for acpi-cpufreq are power
4149 #   efficient for *almost all* workloads and therefore kernel and most
4150 #   distributions have chosen them as defaults. If you still want to change,
4151 #   you should know what you're doing! You *must* disable your distribution's
4152 #   governor settings or conflicts will occur.
4153 #CPU_SCALING_GOVERNOR_ON_AC=powersave
4154 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
4155
4156 # Set the min/max frequency available for the scaling governor.
4157 # Possible values strongly depend on your CPU. For available frequencies see
4158 # the output of tlp-stat -p.
4159 #CPU_SCALING_MIN_FREQ_ON_AC=0
4160 #CPU_SCALING_MAX_FREQ_ON_AC=0
4161 #CPU_SCALING_MIN_FREQ_ON_BAT=0
4162 #CPU_SCALING_MAX_FREQ_ON_BAT=0
4163
4164 # Set energy performance hints (HWP) for Intel P-state governor:
4165 #   performance, balance_performance, default, balance_power, power
4166 # Values are given in order of increasing power saving.
4167 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
4168 CPU_HWP_ON_AC=balance_performance
4169 CPU_HWP_ON_BAT=balance_power
4170
4171 # Set Intel P-state performance: 0..100 (%).
4172 # Limit the max/min P-state to control the power dissipation of the CPU.
4173 # Values are stated as a percentage of the available performance.
4174 # Requires an Intel Core i processor with intel_pstate driver.
4175 #CPU_MIN_PERF_ON_AC=0
4176 #CPU_MAX_PERF_ON_AC=100
4177 #CPU_MIN_PERF_ON_BAT=0
4178 #CPU_MAX_PERF_ON_BAT=30
4179
4180 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
4181 # Requires an Intel Core i processor.
4182 # Important:
4183 # - This may conflict with your distribution's governor settings
4184 # - A value of 1 does *not* activate boosting, it just allows it
4185 #CPU_BOOST_ON_AC=1
4186 #CPU_BOOST_ON_BAT=0
4187
4188 # Minimize number of used CPU cores/hyper-threads under light load conditions:
4189 #   0=disable, 1=enable.
4190 SCHED_POWERSAVE_ON_AC=0
4191 SCHED_POWERSAVE_ON_BAT=1
4192
4193 # Kernel NMI Watchdog:
4194 #   0=disable (default, saves power), 1=enable (for kernel debugging only).
4195 NMI_WATCHDOG=0
4196
4197 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
4198 # Frequency voltage pairs are written to:
4199 #   /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
4200 # CAUTION: only use this, if you thoroughly understand what you are doing!
4201 #PHC_CONTROLS="F:V F:V F:V F:V"
4202
4203 # Set CPU performance versus energy savings policy:
4204 #   performance, balance-performance, default, balance-power, power.
4205 # Values are given in order of increasing power saving.
4206 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
4207 ENERGY_PERF_POLICY_ON_AC=performance
4208 ENERGY_PERF_POLICY_ON_BAT=balance-power
4209
4210 # Disk devices; separate multiple devices with spaces (default: sda).
4211 # Devices can be specified by disk ID also (lookup with: tlp diskid).
4212 DISK_DEVICES="sda sdb"
4213
4214 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
4215 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
4216 # Separate values for multiple disks with spaces. Use the special value 'keep'
4217 # to keep the hardware default for the particular disk.
4218 DISK_APM_LEVEL_ON_AC="254 254"
4219 DISK_APM_LEVEL_ON_BAT="128 128"
4220
4221 # Hard disk spin down timeout:
4222 #   0:        spin down disabled
4223 #   1..240:   timeouts from 5s to 20min (in units of 5s)
4224 #   241..251: timeouts from 30min to 5.5 hours (in units of 30min)
4225 # See 'man hdparm' for details.
4226 # Separate values for multiple disks with spaces. Use the special value 'keep'
4227 # to keep the hardware default for the particular disk.
4228 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
4229 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
4230
4231 # Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
4232 # Separate values for multiple disks with spaces. Use the special value 'keep'
4233 # to keep the kernel default scheduler for the particular disk.
4234 #DISK_IOSCHED="cfq cfq"
4235
4236 # AHCI link power management (ALPM) for disk devices:
4237 #   min_power, med_power_with_dipm(*), medium_power, max_performance.
4238 # (*) Kernel >= 4.15 required, then recommended.
4239 # Multiple values separated with spaces are tried sequentially until success.
4240 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
4241 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
4242
4243 # Exclude host devices from AHCI link power management.
4244 # Separate multiple hosts with spaces.
4245 #SATA_LINKPWR_BLACKLIST="host1"
4246
4247 # Runtime Power Management for AHCI host and disks devices:
4248 #   on=disable, auto=enable.
4249 # EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
4250 #AHCI_RUNTIME_PM_ON_AC=on
4251 #AHCI_RUNTIME_PM_ON_BAT=on
4252
4253 # Seconds of inactivity before disk is suspended.
4254 AHCI_RUNTIME_PM_TIMEOUT=15
4255
4256 # PCI Express Active State Power Management (PCIe ASPM):
4257 #   default, performance, powersave.
4258 PCIE_ASPM_ON_AC=performance
4259 PCIE_ASPM_ON_BAT=powersave
4260
4261 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
4262 # auto = mid on BAT, high on AC; default = use hardware defaults.
4263 RADEON_POWER_PROFILE_ON_AC=high
4264 RADEON_POWER_PROFILE_ON_BAT=low
4265
4266 # Radeon dynamic power management method (DPM): battery, performance.
4267 RADEON_DPM_STATE_ON_AC=performance
4268 RADEON_DPM_STATE_ON_BAT=battery
4269
4270 # Radeon DPM performance level: auto, low, high; auto is recommended.
4271 RADEON_DPM_PERF_LEVEL_ON_AC=auto
4272 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4273
4274 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4275 WIFI_PWR_ON_AC=off
4276 WIFI_PWR_ON_BAT=on
4277
4278 # Disable wake on LAN: Y/N.
4279 WOL_DISABLE=Y
4280
4281 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4282 # A value of 0 disables, >=1 enables power saving (recommended: 1).
4283 SOUND_POWER_SAVE_ON_AC=0
4284 SOUND_POWER_SAVE_ON_BAT=0
4285
4286 # Disable controller too (HDA only): Y/N.
4287 SOUND_POWER_SAVE_CONTROLLER=N
4288
4289 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4290 # Drive can be powered on again by releasing (and reinserting) the eject lever
4291 # or by pressing the disc eject button on newer models.
4292 # Note: an UltraBay/MediaBay hard disk is never powered off.
4293 BAY_POWEROFF_ON_AC=0
4294 BAY_POWEROFF_ON_BAT=0
4295 # Optical drive device to power off (default sr0).
4296 BAY_DEVICE="sr0"
4297
4298 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4299 RUNTIME_PM_ON_AC=on
4300 RUNTIME_PM_ON_BAT=auto
4301
4302 # Exclude PCI(e) device adresses the following list from Runtime PM
4303 # (separate with spaces). Use lspci to get the adresses (1st column).
4304 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4305
4306 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4307 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4308 # prevents accidential power-on of dGPU in hybrid graphics setups.
4309 # Use "" to disable the feature completely.
4310 # Separate multiple drivers with spaces.
4311 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4312
4313 # Set to 0 to disable, 1 to enable USB autosuspend feature.
4314 USB_AUTOSUSPEND=1
4315
4316 # Exclude listed devices from USB autosuspend (separate with spaces).
4317 # Use lsusb to get the ids.
4318 # Note: input devices (usbhid) are excluded automatically
4319 #USB_BLACKLIST="1111:2222 3333:4444"
4320
4321 # Bluetooth devices are excluded from USB autosuspend:
4322 #   0=do not exclude, 1=exclude.
4323 USB_BLACKLIST_BTUSB=0
4324
4325 # Phone devices are excluded from USB autosuspend:
4326 #   0=do not exclude, 1=exclude (enable charging).
4327 USB_BLACKLIST_PHONE=0
4328
4329 # Printers are excluded from USB autosuspend:
4330 #   0=do not exclude, 1=exclude.
4331 USB_BLACKLIST_PRINTER=1
4332
4333 # WWAN devices are excluded from USB autosuspend:
4334 #   0=do not exclude, 1=exclude.
4335 USB_BLACKLIST_WWAN=1
4336
4337 # Include listed devices into USB autosuspend even if already excluded
4338 # by the blacklists above (separate with spaces).
4339 # Use lsusb to get the ids.
4340 #USB_WHITELIST="1111:2222 3333:4444"
4341
4342 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4343 # (workaround for USB devices that cause shutdown problems).
4344 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4345
4346 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4347 # on system startup: 0=disable, 1=enable.
4348 # Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4349 #   are ignored when this is enabled!
4350 #RESTORE_DEVICE_STATE_ON_STARTUP=0
4351 RESTORE_DEVICE_STATE_ON_STARTUP=0
4352
4353 # Radio devices to disable on startup: bluetooth, wifi, wwan.
4354 # Separate multiple devices with spaces.
4355 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
4356 DEVICES_TO_DISABLE_ON_STARTUP="bluetooth"
4357
4358 # Radio devices to enable on startup: bluetooth, wifi, wwan.
4359 # Separate multiple devices with spaces.
4360 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4361
4362 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4363 # (workaround for devices that are blocking shutdown).
4364 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4365
4366 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4367 # (to prevent other operating systems from missing radios).
4368 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4369
4370 # Radio devices to enable on AC: bluetooth, wifi, wwan.
4371 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4372
4373 # Radio devices to disable on battery: bluetooth, wifi, wwan.
4374 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4375
4376 # Radio devices to disable on battery when not in use (not connected):
4377 #   bluetooth, wifi, wwan.
4378 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4379
4380 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4381 # required). Charging starts when the remaining capacity falls below the
4382 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4383 # Main / Internal battery (values in %)
4384 #START_CHARGE_THRESH_BAT0=75
4385 #STOP_CHARGE_THRESH_BAT0=80
4386 # Ultrabay / Slice / Replaceable battery (values in %)
4387 #START_CHARGE_THRESH_BAT1=75
4388 #STOP_CHARGE_THRESH_BAT1=80
4389
4390 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4391 #RESTORE_THRESHOLDS_ON_BAT=1
4392
4393 # ------------------------------------------------------------------------------
4394 # tlp-rdw - Parameters for the radio device wizard
4395 # Possible devices: bluetooth, wifi, wwan.
4396
4397 # Hints:
4398 # - Parameters are disabled by default, remove the leading # to enable them
4399 # - Separate multiple radio devices with spaces
4400
4401 # Radio devices to disable on connect.
4402 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4403 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4404 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4405
4406 # Radio devices to enable on disconnect.
4407 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4408 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4409 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4410
4411 # Radio devices to enable/disable when docked.
4412 #DEVICES_TO_ENABLE_ON_DOCK=""
4413 #DEVICES_TO_DISABLE_ON_DOCK=""
4414
4415 # Radio devices to enable/disable when undocked.
4416 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4417 #DEVICES_TO_DISABLE_ON_UNDOCK=""
4418 #+end_src
4419
4420 *** shemshak
4421
4422 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "shemshak")) "/sudo::/etc/default/tlp")
4423 # ------------------------------------------------------------------------------
4424 # tlp - Parameters for power saving
4425 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
4426
4427 # Hint: some features are disabled by default, remove the leading # to enable
4428 # them.
4429
4430 # Set to 0 to disable, 1 to enable TLP.
4431 TLP_ENABLE=1
4432
4433 # Operation mode when no power supply can be detected: AC, BAT.
4434 # Concerns some desktop and embedded hardware only.
4435 TLP_DEFAULT_MODE=AC
4436
4437 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
4438 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
4439 TLP_PERSISTENT_DEFAULT=0
4440
4441 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
4442 # Non-zero value enables, zero disables laptop mode.
4443 DISK_IDLE_SECS_ON_AC=0
4444 DISK_IDLE_SECS_ON_BAT=2
4445
4446 # Dirty page values (timeouts in secs).
4447 MAX_LOST_WORK_SECS_ON_AC=15
4448 MAX_LOST_WORK_SECS_ON_BAT=60
4449
4450 # Hint: CPU parameters below are disabled by default, remove the leading #
4451 # to enable them, otherwise kernel default values are used.
4452
4453 # Select a CPU frequency scaling governor.
4454 # Intel Core i processor with intel_pstate driver:
4455 #   powersave(*), performance.
4456 # Older hardware with acpi-cpufreq driver:
4457 #   ondemand(*), powersave, performance, conservative, schedutil.
4458 # (*) is recommended.
4459 # Hint: use tlp-stat -p to show the active driver and available governors.
4460 # Important:
4461 #   powersave for intel_pstate and ondemand for acpi-cpufreq are power
4462 #   efficient for *almost all* workloads and therefore kernel and most
4463 #   distributions have chosen them as defaults. If you still want to change,
4464 #   you should know what you're doing! You *must* disable your distribution's
4465 #   governor settings or conflicts will occur.
4466 #CPU_SCALING_GOVERNOR_ON_AC=powersave
4467 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
4468
4469 # Set the min/max frequency available for the scaling governor.
4470 # Possible values strongly depend on your CPU. For available frequencies see
4471 # the output of tlp-stat -p.
4472 #CPU_SCALING_MIN_FREQ_ON_AC=0
4473 #CPU_SCALING_MAX_FREQ_ON_AC=0
4474 #CPU_SCALING_MIN_FREQ_ON_BAT=0
4475 #CPU_SCALING_MAX_FREQ_ON_BAT=0
4476
4477 # Set energy performance hints (HWP) for Intel P-state governor:
4478 #   performance, balance_performance, default, balance_power, power
4479 # Values are given in order of increasing power saving.
4480 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
4481 CPU_HWP_ON_AC=balance_performance
4482 CPU_HWP_ON_BAT=balance_power
4483
4484 # Set Intel P-state performance: 0..100 (%).
4485 # Limit the max/min P-state to control the power dissipation of the CPU.
4486 # Values are stated as a percentage of the available performance.
4487 # Requires an Intel Core i processor with intel_pstate driver.
4488 #CPU_MIN_PERF_ON_AC=0
4489 #CPU_MAX_PERF_ON_AC=100
4490 #CPU_MIN_PERF_ON_BAT=0
4491 #CPU_MAX_PERF_ON_BAT=30
4492
4493 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
4494 # Requires an Intel Core i processor.
4495 # Important:
4496 # - This may conflict with your distribution's governor settings
4497 # - A value of 1 does *not* activate boosting, it just allows it
4498 #CPU_BOOST_ON_AC=1
4499 #CPU_BOOST_ON_BAT=0
4500
4501 # Minimize number of used CPU cores/hyper-threads under light load conditions:
4502 #   0=disable, 1=enable.
4503 SCHED_POWERSAVE_ON_AC=0
4504 SCHED_POWERSAVE_ON_BAT=1
4505
4506 # Kernel NMI Watchdog:
4507 #   0=disable (default, saves power), 1=enable (for kernel debugging only).
4508 NMI_WATCHDOG=0
4509
4510 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
4511 # Frequency voltage pairs are written to:
4512 #   /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
4513 # CAUTION: only use this, if you thoroughly understand what you are doing!
4514 #PHC_CONTROLS="F:V F:V F:V F:V"
4515
4516 # Set CPU performance versus energy savings policy:
4517 #   performance, balance-performance, default, balance-power, power.
4518 # Values are given in order of increasing power saving.
4519 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
4520 ENERGY_PERF_POLICY_ON_AC=performance
4521 ENERGY_PERF_POLICY_ON_BAT=balance-power
4522
4523 # Disk devices; separate multiple devices with spaces (default: sda).
4524 # Devices can be specified by disk ID also (lookup with: tlp diskid).
4525 DISK_DEVICES="sda sdb"
4526
4527 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
4528 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
4529 # Separate values for multiple disks with spaces. Use the special value 'keep'
4530 # to keep the hardware default for the particular disk.
4531 DISK_APM_LEVEL_ON_AC="254 254"
4532 DISK_APM_LEVEL_ON_BAT="128 128"
4533
4534 # Hard disk spin down timeout:
4535 #   0:        spin down disabled
4536 #   1..240:   timeouts from 5s to 20min (in units of 5s)
4537 #   241..251: timeouts from 30min to 5.5 hours (in units of 30min)
4538 # See 'man hdparm' for details.
4539 # Separate values for multiple disks with spaces. Use the special value 'keep'
4540 # to keep the hardware default for the particular disk.
4541 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
4542 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
4543
4544 # Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
4545 # Separate values for multiple disks with spaces. Use the special value 'keep'
4546 # to keep the kernel default scheduler for the particular disk.
4547 #DISK_IOSCHED="cfq cfq"
4548
4549 # AHCI link power management (ALPM) for disk devices:
4550 #   min_power, med_power_with_dipm(*), medium_power, max_performance.
4551 # (*) Kernel >= 4.15 required, then recommended.
4552 # Multiple values separated with spaces are tried sequentially until success.
4553 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
4554 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
4555
4556 # Exclude host devices from AHCI link power management.
4557 # Separate multiple hosts with spaces.
4558 #SATA_LINKPWR_BLACKLIST="host1"
4559
4560 # Runtime Power Management for AHCI host and disks devices:
4561 #   on=disable, auto=enable.
4562 # EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
4563 #AHCI_RUNTIME_PM_ON_AC=on
4564 #AHCI_RUNTIME_PM_ON_BAT=on
4565
4566 # Seconds of inactivity before disk is suspended.
4567 AHCI_RUNTIME_PM_TIMEOUT=15
4568
4569 # PCI Express Active State Power Management (PCIe ASPM):
4570 #   default, performance, powersave.
4571 PCIE_ASPM_ON_AC=performance
4572 PCIE_ASPM_ON_BAT=powersave
4573
4574 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
4575 # auto = mid on BAT, high on AC; default = use hardware defaults.
4576 RADEON_POWER_PROFILE_ON_AC=high
4577 RADEON_POWER_PROFILE_ON_BAT=low
4578
4579 # Radeon dynamic power management method (DPM): battery, performance.
4580 RADEON_DPM_STATE_ON_AC=performance
4581 RADEON_DPM_STATE_ON_BAT=battery
4582
4583 # Radeon DPM performance level: auto, low, high; auto is recommended.
4584 RADEON_DPM_PERF_LEVEL_ON_AC=auto
4585 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4586
4587 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4588 WIFI_PWR_ON_AC=off
4589 WIFI_PWR_ON_BAT=on
4590
4591 # Disable wake on LAN: Y/N.
4592 WOL_DISABLE=Y
4593
4594 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4595 # A value of 0 disables, >=1 enables power saving (recommended: 1).
4596 SOUND_POWER_SAVE_ON_AC=0
4597 SOUND_POWER_SAVE_ON_BAT=0
4598
4599 # Disable controller too (HDA only): Y/N.
4600 SOUND_POWER_SAVE_CONTROLLER=N
4601
4602 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4603 # Drive can be powered on again by releasing (and reinserting) the eject lever
4604 # or by pressing the disc eject button on newer models.
4605 # Note: an UltraBay/MediaBay hard disk is never powered off.
4606 BAY_POWEROFF_ON_AC=0
4607 BAY_POWEROFF_ON_BAT=0
4608 # Optical drive device to power off (default sr0).
4609 BAY_DEVICE="sr0"
4610
4611 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4612 RUNTIME_PM_ON_AC=on
4613 RUNTIME_PM_ON_BAT=auto
4614
4615 # Exclude PCI(e) device adresses the following list from Runtime PM
4616 # (separate with spaces). Use lspci to get the adresses (1st column).
4617 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4618 RUNTIME_PM_BLACKLIST="01:00.0"
4619
4620 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4621 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4622 # prevents accidential power-on of dGPU in hybrid graphics setups.
4623 # Use "" to disable the feature completely.
4624 # Separate multiple drivers with spaces.
4625 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4626
4627 # Set to 0 to disable, 1 to enable USB autosuspend feature.
4628 USB_AUTOSUSPEND=1
4629
4630 # Exclude listed devices from USB autosuspend (separate with spaces).
4631 # Use lsusb to get the ids.
4632 # Note: input devices (usbhid) are excluded automatically
4633 #USB_BLACKLIST="1111:2222 3333:4444"
4634
4635 # Bluetooth devices are excluded from USB autosuspend:
4636 #   0=do not exclude, 1=exclude.
4637 USB_BLACKLIST_BTUSB=0
4638
4639 # Phone devices are excluded from USB autosuspend:
4640 #   0=do not exclude, 1=exclude (enable charging).
4641 USB_BLACKLIST_PHONE=0
4642
4643 # Printers are excluded from USB autosuspend:
4644 #   0=do not exclude, 1=exclude.
4645 USB_BLACKLIST_PRINTER=1
4646
4647 # WWAN devices are excluded from USB autosuspend:
4648 #   0=do not exclude, 1=exclude.
4649 USB_BLACKLIST_WWAN=1
4650
4651 # Include listed devices into USB autosuspend even if already excluded
4652 # by the blacklists above (separate with spaces).
4653 # Use lsusb to get the ids.
4654 #USB_WHITELIST="1111:2222 3333:4444"
4655
4656 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4657 # (workaround for USB devices that cause shutdown problems).
4658 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4659
4660 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4661 # on system startup: 0=disable, 1=enable.
4662 # Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4663 #   are ignored when this is enabled!
4664 #RESTORE_DEVICE_STATE_ON_STARTUP=0
4665 RESTORE_DEVICE_STATE_ON_STARTUP=1
4666
4667 # Radio devices to disable on startup: bluetooth, wifi, wwan.
4668 # Separate multiple devices with spaces.
4669 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
4670
4671 # Radio devices to enable on startup: bluetooth, wifi, wwan.
4672 # Separate multiple devices with spaces.
4673 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4674
4675 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4676 # (workaround for devices that are blocking shutdown).
4677 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4678
4679 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4680 # (to prevent other operating systems from missing radios).
4681 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4682
4683 # Radio devices to enable on AC: bluetooth, wifi, wwan.
4684 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4685
4686 # Radio devices to disable on battery: bluetooth, wifi, wwan.
4687 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4688
4689 # Radio devices to disable on battery when not in use (not connected):
4690 #   bluetooth, wifi, wwan.
4691 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4692
4693 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4694 # required). Charging starts when the remaining capacity falls below the
4695 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4696 # Main / Internal battery (values in %)
4697 #START_CHARGE_THRESH_BAT0=75
4698 #STOP_CHARGE_THRESH_BAT0=80
4699 # Ultrabay / Slice / Replaceable battery (values in %)
4700 #START_CHARGE_THRESH_BAT1=75
4701 #STOP_CHARGE_THRESH_BAT1=80
4702
4703 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4704 #RESTORE_THRESHOLDS_ON_BAT=1
4705
4706 # ------------------------------------------------------------------------------
4707 # tlp-rdw - Parameters for the radio device wizard
4708 # Possible devices: bluetooth, wifi, wwan.
4709
4710 # Hints:
4711 # - Parameters are disabled by default, remove the leading # to enable them
4712 # - Separate multiple radio devices with spaces
4713
4714 # Radio devices to disable on connect.
4715 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4716 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4717 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4718
4719 # Radio devices to enable on disconnect.
4720 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4721 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4722 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4723
4724 # Radio devices to enable/disable when docked.
4725 #DEVICES_TO_ENABLE_ON_DOCK=""
4726 #DEVICES_TO_DISABLE_ON_DOCK=""
4727
4728 # Radio devices to enable/disable when undocked.
4729 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4730 #DEVICES_TO_DISABLE_ON_UNDOCK=""
4731 #+end_src
4732
4733 ** X
4734
4735 *** xprofile
4736 :PROPERTIES:
4737 :header-args+: :tangle ~/.xprofile
4738 :END:
4739
4740 =~/.xprofile= is similar in style to =~/.xinitrc=, but on the
4741 contrary, it's automatically sourced by LightDM, my display manager of
4742 choice.
4743
4744 #+begin_src sh :tangle no
4745 xset -b  # disable bell
4746 xset r rate 200 45  # repeat delay (ms) and rate (repeats/sec)
4747
4748 # setxkbmap -option compose:ralt
4749
4750 setxkbmap -option ctrl:nocaps          # turn capslock into control
4751 setxkbmap -option altwin:swap_alt_win  # swap alt and super
4752
4753 if [ $(hostname) = "plasma" ]
4754 then
4755     setxkbmap -option ctrl:rctrl_ralt  # turn right control into right alt
4756 fi
4757
4758 if [ $(hostname) = "enigma" ]
4759 then
4760     xmodmap -e "keycode 135 = Alt_R"  # remap menu key to alt
4761 fi
4762
4763 light -Scrs "intel_backlight" 2
4764
4765 source $HOME/.zprofile
4766
4767 export _JAVA_AWT_WM_NONREPARENTING=1
4768 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4769
4770 if [ $(hostname) = "plasma" ]
4771 then
4772     unlock-def-gk.py &
4773 fi
4774
4775 bspwm &
4776 #+end_src
4777
4778 *** X resources
4779
4780 **** Xresources
4781 :PROPERTIES:
4782 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
4783 :END:
4784
4785 #+begin_src conf-xdefaults
4786 #include ".Xresources.d/fonts"
4787 ! #include ".Xresources.d/colors"
4788 #include ".Xresources.d/emacs"
4789 #include ".Xresources.d/rxvt-unicode"
4790 #+end_src
4791
4792 **** Xresources.d
4793
4794 ***** fonts
4795 :PROPERTIES:
4796 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
4797 :END:
4798
4799 #+begin_src conf-xdefaults
4800 Xft.lcdfilter: lcddefault
4801 Xft.antialias: true
4802 Xft.autohint: 0
4803 Xft.hinting: true
4804 Xft.hintstyle: hintslight
4805 ! Xft.hintstyle: hintfull
4806 Xft.rgba: rgb
4807 Xft.dpi: 96
4808 #+end_src
4809
4810 ***** colors
4811 :PROPERTIES:
4812 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
4813 :END:
4814
4815 #+begin_src conf-xdefaults :tangle no
4816 #include "gruvbox-light.xresources"
4817 ! #include "gruvbox-dark.xresources"
4818 #include "gruvbox-urxvt256.xresources"
4819 #+end_src
4820
4821 #+begin_src conf-xdefaults :tangle no
4822 ! -----------------------------------------------------------------------------
4823 ! File: gruvbox-light.xresources
4824 ! Description: Retro groove colorscheme generalized
4825 ! Author: morhetz <morhetz@gmail.com>
4826 ! Source: https://github.com/morhetz/gruvbox-generalized
4827 ! Last Modified: 6 Sep 2014
4828 ! -----------------------------------------------------------------------------
4829
4830 ! hard contrast: *background: #f9f5d7
4831 *background: #fbf1c7
4832 ! soft contrast: *background: #f2e5bc
4833 *foreground: #3c3836
4834 ! Black + DarkGrey
4835 *color0:  #fdf4c1
4836 *color8:  #928374
4837 ! DarkRed + Red
4838 *color1:  #cc241d
4839 *color9:  #9d0006
4840 ! DarkGreen + Green
4841 *color2:  #98971a
4842 *color10: #79740e
4843 ! DarkYellow + Yellow
4844 *color3:  #d79921
4845 *color11: #b57614
4846 ! DarkBlue + Blue
4847 *color4:  #458588
4848 *color12: #076678
4849 ! DarkMagenta + Magenta
4850 *color5:  #b16286
4851 *color13: #8f3f71
4852 ! DarkCyan + Cyan
4853 *color6:  #689d6a
4854 *color14: #427b58
4855 ! LightGrey + White
4856 *color7:  #7c6f64
4857 *color15: #3c3836
4858 #+end_src
4859
4860 #+begin_src conf-xdefaults :tangle no
4861 ! -----------------------------------------------------------------------------
4862 ! File: gruvbox-dark.xresources
4863 ! Description: Retro groove colorscheme generalized
4864 ! Author: morhetz <morhetz@gmail.com>
4865 ! Source: https://github.com/morhetz/gruvbox-generalized
4866 ! Last Modified: 6 Sep 2014
4867 ! -----------------------------------------------------------------------------
4868
4869 ! hard contrast: *background: #1d2021
4870 *background: #282828
4871 ! soft contrast: *background: #32302f
4872 *foreground: #ebdbb2
4873 ! Black + DarkGrey
4874 *color0:  #282828
4875 *color8:  #928374
4876 ! DarkRed + Red
4877 *color1:  #cc241d
4878 *color9:  #fb4934
4879 ! DarkGreen + Green
4880 *color2:  #98971a
4881 *color10: #b8bb26
4882 ! DarkYellow + Yellow
4883 *color3:  #d79921
4884 *color11: #fabd2f
4885 ! DarkBlue + Blue
4886 *color4:  #458588
4887 *color12: #83a598
4888 ! DarkMagenta + Magenta
4889 *color5:  #b16286
4890 *color13: #d3869b
4891 ! DarkCyan + Cyan
4892 *color6:  #689d6a
4893 *color14: #8ec07c
4894 ! LightGrey + White
4895 *color7:  #a89984
4896 *color15: #ebdbb2
4897 #+end_src
4898
4899 #+begin_src conf-xdefaults :tangle no
4900 ! -----------------------------------------------------------------------------
4901 ! File: gruvbox-urxvt256.xresources
4902 ! Description: Retro groove colorscheme generalized
4903 ! Author: morhetz <morhetz@gmail.com>
4904 ! Source: https://github.com/morhetz/gruvbox-generalized
4905 ! Last Modified: 13 Dec 2013
4906 ! -----------------------------------------------------------------------------
4907
4908 URxvt.color24:  #076678
4909 URxvt.color66:  #427b58
4910 URxvt.color88:  #9d0006
4911 URxvt.color96:  #8f3f71
4912 URxvt.color100: #79740e
4913 URxvt.color108: #8ec07c
4914 URxvt.color109: #83a598
4915 URxvt.color130: #af3a03
4916 URxvt.color136: #b57614
4917 URxvt.color142: #b8bb26
4918 URxvt.color167: #fb4934
4919 URxvt.color175: #d3869b
4920 URxvt.color208: #fe8019
4921 URxvt.color214: #fabd2f
4922 URxvt.color223: #ebdbb2
4923 URxvt.color228: #f2e5bc
4924 URxvt.color229: #fbf1c7
4925 URxvt.color230: #f9f5d7
4926 URxvt.color234: #1d2021
4927 URxvt.color235: #282828
4928 URxvt.color236: #32302f
4929 URxvt.color237: #3c3836
4930 URxvt.color239: #504945
4931 URxvt.color241: #665c54
4932 URxvt.color243: #7c6f64
4933 URxvt.color244: #928374
4934 URxvt.color245: #928374
4935 URxvt.color246: #a89984
4936 URxvt.color248: #bdae93
4937 URxvt.color250: #d5c4a1
4938 #+end_src
4939
4940 ***** emacs
4941 :PROPERTIES:
4942 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
4943 :END:
4944
4945 #+begin_src conf-xdefaults
4946 Emacs.menuBar: off
4947 Emacs.toolBar: off
4948 Emacs.verticalScrollBars: off
4949 Emacs.cursorBlink: off
4950 Emacs.FontBackend: xft,x
4951 ! Emacs.font: Ubuntu Mono-12
4952 ! Emacs.font: Triplicate T4C-11
4953 ! Emacs.font: Ubuntu Mono-10.5
4954 ! Emacs.font: Ubuntu Mono-12
4955 ! Emacs.font: Iosevka-11
4956
4957 ! Emacs.font: Fira Mono:size=15
4958 ! Emacs.font: DejaVu Sans Mono:size=15
4959 ! Emacs.font: Inconsolata:size=17
4960 ! Emacs.font: Inconsolata:size=16
4961 ! Emacs.font: Inconsolata LGC:size=14
4962 ! Emacs.font: Source Code Pro Medium-10.5
4963 Emacs.font: Source Code Pro:size=14
4964 ! Emacs.font: Ubuntu Mono:size=16
4965 ! Emacs.font: Iosevka:size=16
4966 #+end_src
4967
4968 ***** rxvt-unicode
4969 :PROPERTIES:
4970 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
4971 :END:
4972
4973 #+begin_src conf-xdefaults
4974 ! Font
4975 URxvt.font:             xft:source code pro:pixelsize=14:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
4976 URxvt.boldFont:         xft:source code pro semibold:pixelsize=14:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
4977 URxvt.italicFont:       xft:source code pro italic:pixelsize=14:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
4978 URxvt.bolditalicFont:   xft:source code pro semibold italic:pixelsize=14:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
4979
4980 URxvt.xftAntialias:     true
4981 URxvt.letterSpace:      0
4982
4983 URxvt.depth:                0
4984 URxvt.loginShell:           true
4985 URxvt.saveLines:            100000
4986 URxvt.internalBorder:       3
4987 URxvt.lineSpace:            0
4988 URxvt.scrollBar:            false
4989 URxvt.scrollStyle:          rxvt
4990 URxvt*scrollTtyOutput:      false
4991 URxvt*scrollWithBuffer:     true
4992 URxvt*scrollTtyKeypress:    true
4993 URxvt.keysym.Shift-Up:      command:\033]720;1\007
4994 URxvt.keysym.Shift-Down:    command:\033]721;1\007
4995
4996 URxvt.perl-ext-common:      default,clipboard,url-select,keyboard-select
4997 URxvt.url-select.launcher:  firefox
4998 URxvt.url-select.underline: true
4999 URxvt.keysym.M-u:           perl:url-select:select_next
5000 URxvt.keysym.M-Escape:      perl:keyboard-select:activate
5001 URxvt.keysym.M-s:           perl:keyboard-select:search
5002 URxvt.url-launcher:         /usr/bin/firefox
5003 URxvt.matcher.button:       1
5004 URxvt.iso14755:             false
5005 URxvt.iso14755_53:          false
5006 URxvt.keysym.M-c:           perl:clipboard:copy
5007 URxvt.keysym.M-v:           perl:clipboard:paste
5008 URxvt.keysym.C-A-V:         perl:clipboard:paste_escaped
5009 URxvt.keysym.C-Up:          font-size:increase
5010 URxvt.keysym.C-Down:        font-size:decrease
5011 URxvt.keysym.C-S-Up:        font-size:incglobal
5012 URxvt.keysym.C-S-Down:      font-size:decglobal
5013 URxvt.keysym.C-equal:       font-size:reset
5014 !URxvt.keysym.C-question:   font-size:show
5015
5016 URxvt.iconFile:             /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
5017
5018 !urxvt*foreground: white
5019 !urxvt*background: black
5020
5021 !*color0:  #2E3436
5022 !*color1:  #a40000
5023 !*color2:  #4E9A06
5024 !*color3:  #C4A000
5025 !*color4:  #3465A4
5026 !*color5:  #75507B
5027 !*color6:  #ce5c00
5028 !*color7:  #babdb9
5029 !*color8:  #555753
5030 !*color9:  #EF2929
5031 !*color10: #8AE234
5032 !*color11: #FCE94F
5033 !*color12: #729FCF
5034 !*color13: #AD7FA8
5035 !*color14: #fcaf3e
5036 !*color15: #EEEEEC
5037
5038 !URxvt.foreground: #C8C8C8
5039 !URxvt.background: #FFFFFF
5040
5041 !! black
5042 !*color0:  #2E3436
5043 !*color8:  #555753
5044 !! red
5045 !*color1:  #a40000
5046 !*color9:  #EF2929
5047 !! green
5048 !*color2:  #4E9A06
5049 !*color10: #8AE234
5050 !! yellow
5051 !*color3:  #C4A000
5052 !*color11: #FCE94F
5053 !! blue
5054 !*color4:  #3465A4
5055 !*color12: #729FCF
5056 !! purple
5057 !*color5:  #75507B
5058 !*color13: #AD7FA8
5059 !! orange (replaces cyan)
5060 !*color6:  #ce5c00
5061 !*color14: #fcaf3e
5062 !! white
5063 !*color7:  #babdb9
5064 !*color15: #EEEEEC
5065
5066 ! Tango colour theme for rxvt-unicode
5067 URxvt.background: #FFFFFF
5068 URxvt.foreground: #000000
5069
5070 ! Black
5071 URxvt.color0: #2E3436
5072 URxvt.color8: #757773
5073
5074 ! Red
5075 URxvt.color1: #CC0000
5076 URxvt.color9: #EF2929
5077
5078 ! Green
5079 URxvt.color2: #4E9A06
5080 URxvt.color10: #8AE234
5081
5082 ! Yellow
5083 URxvt.color3: #C4A000
5084 URxvt.color11: #FCE94F
5085
5086 ! Blue
5087 URxvt.color4: #3465A4
5088 URxvt.color12: #729FCF
5089
5090 ! Magenta
5091 URxvt.color5: #75507B
5092 URxvt.color13: #AD7FA8
5093
5094 !! Cyan
5095 !URxvt.color6: #06989A
5096 !URxvt.color14: #34E2E2
5097 ! orange (replaces cyan)
5098 ,*color6:  #ce5c00
5099 ,*color14: #fcaf3e
5100
5101 ! White
5102 URxvt.color7: #D3D7CF
5103 URxvt.color15: #EEEEEC
5104 #+end_src
5105
5106 *** xkb us_ab keyboard layout
5107
5108 #+begin_src conf :tangle "/sudo::/usr/share/X11/xkb/symbols/us_ab" :comments none
5109 default partial alphanumeric_keys
5110 xkb_symbols "us_ab" {
5111     include "us(basic)"
5112     name[Group1]= "English (US)(aminb)";
5113
5114     key <MENU> { [ Alt_R ] };
5115 };
5116 #+end_src
5117
5118 ** XDG
5119 :PROPERTIES:
5120 :header-args+: :tangle ~/.config/user-dirs.dirs
5121 :END:
5122
5123 #+begin_src conf
5124 XDG_DESKTOP_DIR="$HOME/Desktop"
5125 XDG_DOCUMENTS_DIR="$HOME/usr/docs"
5126 XDG_DOWNLOAD_DIR="$HOME/usr/dls"
5127 XDG_MUSIC_DIR="$HOME/usr/music"
5128 XDG_PICTURES_DIR="$HOME/usr/pics"
5129 XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
5130 XDG_TEMPLATES_DIR="$HOME/usr/Templates"
5131 XDG_VIDEOS_DIR="$HOME/usr/vids"
5132 #+end_src
5133
5134 ** Zathura
5135 :PROPERTIES:
5136 :header-args+: :tangle ~/.config/zathura/zathurarc
5137 :END:
5138
5139 #+begin_src conf
5140 set smooth-scroll true
5141 set selection-clipboard clipboard
5142 set zoom-step 05
5143 set default-bg "#272727"
5144 set statusbar-bg "#272727"
5145 set inputbar-bg "#373737"
5146 #+end_src
5147
5148 ** Zsh
5149
5150 My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
5151 [[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
5152 installed.
5153
5154 *** zimrc
5155 :PROPERTIES:
5156 :header-args+: :tangle ~/.zimrc
5157 :END:
5158
5159 #+begin_src sh
5160
5161
5162 #################
5163 # CORE SETTINGS #
5164 #################
5165
5166 #
5167 # Zim settings
5168 #
5169
5170 # Select what modules you would like enabled.
5171 # The second line of modules may depend on options set by modules in the first
5172 # line. These dependencies are noted on the respective module's README.md.
5173 zmodules=(directory environment git git-info history input ssh utility custom \
5174           syntax-highlighting history-substring-search prompt completion)
5175
5176
5177 ###################
5178 # MODULE SETTINGS #
5179 ###################
5180
5181 #
5182 # Prompt
5183 #
5184
5185 # Set your desired prompt here
5186 zprompt_theme='pure'
5187 #PURE_PROMPT_SYMBOL=λ
5188 #PURE_PROMPT_SYMBOL=δ
5189 PURE_PROMPT_SYMBOL=➜
5190
5191 #
5192 # Completion
5193 #
5194
5195 # set an optional host-specific filename for the completion cache file
5196 # if none is provided, the default '.zcompdump' is used.
5197 #zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
5198
5199 #
5200 # Utility
5201 #
5202
5203 # Uncomment to enable command correction prompts
5204 # See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
5205 setopt CORRECT
5206
5207 #
5208 # Environment
5209 #
5210
5211 # Set the string below to the desired terminal title format string.
5212 # The terminal title is redrawn upon directory change, however, variables like
5213 # ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
5214 #   http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
5215 # The example below uses the following format: 'username@host:/current/directory'
5216 ztermtitle='%n@%m:%~'
5217
5218 #
5219 # Input
5220 #
5221
5222 # Uncomment to enable double-dot expansion.
5223 # This appends '../' to your input for each '.' you type after an initial '..'
5224 #zdouble_dot_expand='true'
5225
5226 #
5227 # Syntax-Highlighting
5228 #
5229
5230 # This determines what highlighters will be used with the syntax-highlighting module.
5231 # Documentation of the highlighters can be found here:
5232 #   https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
5233 # For (u)rxvt, termite and gnome-terminal users,
5234 # removing the 'cursor' highlighter will fix the disappearing cursor problem
5235 #zhighlighters=(main brackets cursor)
5236 zhighlighters=(main brackets pattern)
5237
5238
5239 #
5240 # SSH
5241 #
5242
5243 # Load these ssh identities with the ssh module
5244 zssh_ids=(id_ed25519_bandali)
5245
5246
5247 #
5248 # Pacman
5249 #
5250
5251 # Set (optional) pacman front-end.
5252 zpacman_frontend='yay'
5253
5254 # Load any helper scripts as defined here
5255 #zpacman_helper=(aur)
5256 #+end_src
5257
5258 *** zlogin
5259 :PROPERTIES:
5260 :header-args+: :tangle ~/.zlogin
5261 :END:
5262
5263 #+begin_src sh
5264
5265
5266 #
5267 # User configuration sourced by login shells
5268 #
5269
5270 # Initialize zim
5271 [[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
5272 #+end_src
5273
5274 *** zprofile
5275 :PROPERTIES:
5276 :header-args+: :tangle ~/.zprofile
5277 :END:
5278
5279 #+begin_src sh
5280 #PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
5281 #PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
5282 export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
5283 export XDG_CONFIG_HOME=$HOME/.config
5284 export XDG_DATA_HOME=$HOME/.local/share
5285 export XDG_DATA_DIRS=/usr/local/share:/usr/share
5286 export MAILDIR="$HOME/mail"
5287 export CVS_RSH=ssh
5288 #export MATHMODELS=$HOME/src/eiffel/mathmodels
5289 #export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
5290 #export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
5291
5292 # Eiffel2Java stuff
5293 #export JAVA_HOME=/usr/lib/jvm/default
5294 #export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
5295 #export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
5296 #export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
5297
5298 #export PATH="$HOME/usr/build/pvs:$PATH"
5299 #export SBCLISP_HOME=/usr/share/sbcl-source
5300 #export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
5301
5302 export MOZ_USE_XINPUT2=1  # precise scrolling in firefox
5303
5304 #export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
5305 #export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
5306
5307 export NIXPKGS=$HOME/src/git/nixpkgs
5308
5309 if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
5310 #+end_src
5311
5312 *** zshenv
5313 :PROPERTIES:
5314 :header-args+: :tangle ~/.zshenv
5315 :END:
5316
5317 #+begin_src sh
5318 # Ensure that a non-login, non-interactive shell has a defined environment.
5319 if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
5320   source "${ZDOTDIR:-$HOME}/.zprofile"
5321 fi
5322 #+end_src
5323
5324 *** zshrc
5325 :PROPERTIES:
5326 :header-args+: :tangle ~/.zshrc
5327 :END:
5328
5329 #+begin_src sh
5330 # Bash-like navigation
5331 #export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
5332 #export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
5333 export WORDCHARS='*?[]~=&;!#$%^(){}<>'
5334 #ZLE_SPACE_SUFFIX_CHARS=$'|&'
5335
5336 #disable -r time       # disable shell reserved word
5337 #alias time='time -p'  # -p for POSIX output
5338
5339 # rehash if last command was pacaur or pacman
5340 # (so that zsh picks up changes in $PATH immediately)
5341 TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
5342
5343 #
5344 # User configuration sourced by interactive shells
5345 #
5346
5347 # Change default zim location
5348 export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
5349
5350 # Start zim
5351 [[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
5352
5353 ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
5354 #ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
5355
5356 setopt globdots
5357
5358 source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
5359 # source ~/.zsh/zsh-autopair/autopair.zsh
5360
5361
5362 ### fzf ###
5363
5364 source /usr/share/fzf/key-bindings.zsh
5365 source /usr/share/fzf/completion.zsh
5366
5367 # Accept history selection instead of putting it on
5368 # the command line
5369 fzf-history-widget-accept() {
5370   fzf-history-widget
5371   zle accept-line
5372 }
5373 #zle     -N   fzf-history-widget-accept
5374 #bindkey '^R' fzf-history-widget-accept
5375
5376 # alt+c preview
5377 export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
5378
5379 ### fzf ###
5380
5381
5382 # aliases
5383 alias mpv="mpv --ytdl-format mp4"
5384 alias mv="mv -iv"
5385 alias cp="cp -iv"
5386 alias scl=systemctl
5387 alias jcl=journalctl
5388 alias m="mbsync -a; getmail; notmuch new"
5389 alias best="youtube-dl -f best"
5390 alias nixx="ssh amin@nix.aminb.org"
5391 alias fence="ssh aminb@fencepost.gnu.org"
5392
5393 aur() {
5394    cd ~/usr/build
5395    git clone https://aur.archlinux.org/${1}.git
5396    cd ${1}
5397 }
5398
5399 # i-beam cursor
5400 echo -e "\033[5 q"
5401 #echo -e "\033[6 q"
5402 #+end_src
5403
5404 * Scripts
5405
5406 This section contains various useful scripts and the ones used by the
5407 programs above. For instance, =toggle-tablet= for switching to and
5408 from tablet mode on my X220T, =toggle-presentation-mode= for toggling
5409 Xfce's presentation mode which keeps the screen awake, and
5410 =rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
5411 exact brightness value.
5412
5413 ** battery-percentage-time
5414 :PROPERTIES:
5415 :header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/sh"
5416 :END:
5417
5418 #+begin_src sh :tangle no
5419 dbus_send() {
5420         label=$1
5421         dbus-send --print-reply=literal --system \
5422                 --dest=org.freedesktop.UPower \
5423                 /org/freedesktop/UPower/devices/battery_BAT0 \
5424                 org.freedesktop.DBus.Properties.Get \
5425                 string:org.freedesktop.UPower.Device \
5426                 string:"${label}" | awk '{print $3}'
5427 }
5428
5429 perc=$(dbus_send 'Percentage')
5430 state=$(dbus_send 'State')
5431
5432 if [ "$state" -eq 2 ]; then  # Discharging
5433         secs=$(dbus_send 'TimeToEmpty')
5434 elif [ "$state" -eq 1 ]; then  # Charging
5435         secs=$(dbus_send 'TimeToFull')
5436 fi
5437
5438 printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60))
5439 #+end_src
5440
5441 ** my-i3status.py
5442 :PROPERTIES:
5443 :header-args+: :tangle ~/.local/bin/my-i3status.py :shebang "#!/usr/bin/env python2"
5444 :END:
5445
5446 #+begin_src python :comments none
5447 # -*- coding: utf-8 -*-
5448
5449 # This script is a simple wrapper which prefixes each i3status line with custom
5450 # information. It is based on:
5451 # https://github.com/i3/i3status/blob/master/contrib/wrapper.py
5452 #
5453 # In ~/.i3status.conf, add the following line:
5454 #     output_format = "i3bar"
5455 # in the 'general' section.
5456 # Then, in ~/.config/i3/config or ~/.config/sway/config add:
5457 #     status_command i3status | my-i3status.py
5458 # in the 'bar' section.  Make sure my-i3status.py is in $PATH.
5459 #
5460 # © 2012 Valentin Haenel <valentin.haenel@gmx.de>
5461 # © 2018 Amin Bandali <bandali@gnu.org>
5462 #
5463 # This program is free software. It comes without any warranty, to the extent
5464 # permitted by applicable law. You can redistribute it and/or modify it under
5465 # the terms of the Do What The Fuck You Want To Public License (WTFPL), Version
5466 # 2, as published by Sam Hocevar. See http://sam.zoy.org/wtfpl/COPYING for more
5467 # details.
5468
5469 import sys
5470 import json
5471 import os
5472
5473 def get_nosleep():
5474     """ Return true if ~/.nosleep exists. """
5475     return os.path.isfile(os.path.expanduser("~/.nosleep"))
5476
5477 def print_line(message):
5478     """ Non-buffered printing to stdout. """
5479     sys.stdout.write(message + '\n')
5480     sys.stdout.flush()
5481
5482 def read_line():
5483     """ Interrupted respecting reader for stdin. """
5484     # try reading a line, removing any extra whitespace
5485     try:
5486         line = sys.stdin.readline().strip()
5487         # i3status sends EOF, or an empty line
5488         if not line:
5489             sys.exit(3)
5490         return line
5491     # exit on ctrl-c
5492     except KeyboardInterrupt:
5493         sys.exit()
5494
5495 if __name__ == '__main__':
5496     # Skip the first line which contains the version header.
5497     print_line(read_line())
5498
5499     # The second line contains the start of the infinite array.
5500     print_line(read_line())
5501
5502     while True:
5503         line, prefix = read_line(), ''
5504         # ignore comma at start of lines
5505         if line.startswith(','):
5506             line, prefix = line[1:], ','
5507
5508         if get_nosleep():
5509             j = json.loads(line)
5510             # insert information into the start of the json, but could be anywhere
5511             j.insert(0, {'full_text' : '🖵 ', 'name' : 'nosleep'})
5512             # and echo back new encoded json
5513             print_line(prefix+json.dumps(j))
5514         else:
5515             print_line(prefix+line)
5516 #+end_src
5517
5518 ** rofi-light
5519 :PROPERTIES:
5520 :header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
5521 :END:
5522
5523 #+begin_src bash
5524 cur=$(light -G)
5525 val=$(rofi -dmenu -mesg "light    $cur" -p "light -S " -l 0 -width 12)
5526 light -S $val
5527 #+end_src
5528
5529 ** s (run sway)
5530 :PROPERTIES:
5531 :header-args+: :tangle ~/.local/bin/s :shebang "#!/bin/bash"
5532 :END:
5533
5534 #+begin_src bash
5535 export _JAVA_AWT_WM_NONREPARENTING=1
5536 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
5537 light -Nr 2
5538 source $HOME/.zprofile
5539 sway
5540 #+end_src
5541
5542 ** sway-ws-util
5543 :PROPERTIES:
5544 :header-args+: :tangle ~/.local/bin/sway-ws-util :shebang "#!/bin/bash"
5545 :END:
5546
5547 #+begin_src bash
5548 curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name')
5549 [[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1))
5550 [[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1))
5551 dest_ws=-1
5552 op=-1
5553
5554 if [ "$1" = "switch" ] || [ "$1" = "move" ]; then
5555   op="$1"
5556   if [ "$2" = "prev" ]; then
5557     dest_ws="$prev_ws"
5558   elif [ "$2" = "next" ]; then
5559     dest_ws="$next_ws"
5560   else
5561     echo "Usage: $0 $1 {prev|next} [follow]"
5562     exit 1
5563   fi
5564 else
5565   echo "Usage: $0 {switch|move} {prev|next} [follow]"
5566   exit 1
5567 fi
5568
5569 if [ "$op" = "switch" ]; then
5570   sway workspace "$dest_ws"
5571 elif [ "$op" = "move" ]; then
5572   sway move container to workspace "$dest_ws"
5573   if [ "$3" = "follow" ]; then
5574     sway workspace "$dest_ws"
5575   fi
5576 fi
5577 #+end_src
5578
5579 ** toggle-layout
5580 :PROPERTIES:
5581 :header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
5582 :END:
5583
5584 #+begin_src bash :tangle no
5585 lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
5586
5587 if [ "$lang" = "us" ]; then
5588     setxkbmap ir
5589 else
5590     setxkbmap us
5591     # xmodmap $HOME/.Xmodmap
5592 fi
5593 #+end_src
5594
5595 ** toggle-presentation-mode
5596 :PROPERTIES:
5597 :header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
5598 :END:
5599
5600 #+begin_src bash :tangle no
5601 xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
5602 #+end_src
5603
5604 ** toggle-tablet
5605 :PROPERTIES:
5606 :header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
5607 :END:
5608
5609 This script toggles between a 'normal' mode and a 'tablet' mode, doing
5610 a few things:
5611
5612 - rotates the screen using =xrandr=, so that rotating the physical
5613   display of my X220t would have the laptop's battery on the right
5614   hand side,
5615 - enables touch screen,
5616 - properly rotates the stylus pen and touch screen pointers, and
5617 - toggles between RGB and Vertical BGR sub-pixel order.
5618
5619 #+begin_src bash :tangle no
5620 case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
5621     0)  # Screen is not rotated, we should rotate it right (90°)
5622            xrandr -o 3
5623            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
5624            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
5625            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
5626            xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
5627            ;;
5628     1)  # Currently top is rotated right, we should set it normal (0°)
5629           xrandr -o 0
5630           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
5631           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
5632           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
5633           xfconf-query -c xsettings -p /Xft/RGBA -s rgb
5634           ;;
5635     *)
5636            echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
5637            exit 1
5638            ;;
5639 esac
5640 #+end_src
5641
5642 ** unlock-def-gk.py
5643 :PROPERTIES:
5644 :header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
5645 :END:
5646
5647 #+begin_src python :tangle no
5648 import gnomekeyring as gk
5649 # list_item_ids_sync('login')[0] == 1L
5650 gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
5651 #+end_src
5652
5653 ** volume-info
5654 :PROPERTIES:
5655 :header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh"
5656 :END:
5657
5658 #+begin_src sh :tangle no
5659 cur_vol=$(pamixer --get-volume)
5660
5661 if [ $(pamixer --get-mute) = true ]; then
5662   printf 'mt \n' "$cur_vol"
5663 else
5664   printf '%02d \n' "$cur_vol"
5665 fi
5666 #+end_src
5667
5668 ** wp
5669
5670 My little wallpaper changer script.
5671
5672 *** wp
5673 :PROPERTIES:
5674 :header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
5675 :END:
5676
5677 #+begin_src bash :tangle no
5678 export DISPLAY=:0
5679
5680 case "$1" in
5681   "day")
5682     feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5683     ;;
5684   "night")
5685     feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5686     ;;
5687   *)
5688     echo $"Usage: $0 {day|night}"
5689     exit 1
5690 esac
5691 #+end_src
5692
5693 *** wp-auto
5694 :PROPERTIES:
5695 :header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
5696 :END:
5697
5698 #+begin_src bash :tangle no
5699 SED=$(which sed)
5700 ROFI=$(which rofi)
5701
5702 export DISPLAY=:0
5703 HOUR=$(date +%H)
5704
5705 if [ -z "${SED}" ]
5706 then
5707     echo "Did not find 'sed', script cannot continue."
5708     exit 1
5709 fi
5710 if [ -z "${ROFI}" ]
5711 then
5712     echo "Did not find rofi, there is no point to continue."
5713     exit 1
5714 fi
5715
5716 ###
5717 # Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
5718 # Repeated calls should leave the config clean-ish
5719 ###
5720 function set_theme()
5721 {
5722     CDIR="${HOME}/.config/rofi/"
5723     if [ ! -d "${CDIR}" ]
5724     then
5725         mkdir -p ${CDIR}
5726     fi
5727     if [ -f "${CDIR}/config" ]
5728     then
5729         ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
5730     fi
5731     echo "rofi.theme: ${1}" >> "${CDIR}/config"
5732
5733 }
5734
5735 if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
5736     then
5737         feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5738         xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
5739         set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
5740     else
5741         feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5742         xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
5743         set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
5744 fi
5745 #+end_src
5746
5747 *** wp.service
5748 :PROPERTIES:
5749 :header-args+: :tangle ~/.config/systemd/user/wp.service
5750 :END:
5751
5752 #+begin_src conf :tangle no
5753 [Unit]
5754 Description=wallpaper service
5755
5756 [Service]
5757 Type=oneshot
5758 ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
5759 #+end_src
5760
5761 *** wp.timer
5762 :PROPERTIES:
5763 :header-args+: :tangle ~/.config/systemd/user/wp.timer
5764 :END:
5765
5766 #+begin_src conf :tangle no
5767 [Unit]
5768 [Unit]
5769 Description=wallpaper timer
5770
5771 [Timer]
5772 OnCalendar=07,21:00
5773 Unit=wp.service
5774 Persistent=true
5775
5776 [Install]
5777 WantedBy=timers.target
5778 #+end_src
5779
5780 ** zathura-sync.sh
5781 :PROPERTIES:
5782 :header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
5783 :END:
5784
5785 #+begin_src sh
5786 pos="$1"
5787 pdffile="$2"
5788 zathura --synctex-forward "$pos" "$pdffile" || \
5789     (
5790     zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
5791     sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
5792 #+end_src
5793 ** Fun :)
5794
5795 *** eat-em
5796 :PROPERTIES:
5797 :header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
5798 :END:
5799
5800 #+begin_src sh
5801 # Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5802 # [ESC] character in original post removed here.
5803
5804 # ANSI Color -- use these variables to easily have different color
5805 #    and format output. Make sure to output the reset sequence after
5806 #    colors (f = foreground, b = background), and use the 'off'
5807 #    feature for anything you turn on.
5808
5809 initializeANSI()
5810 {
5811  esc="$(echo -en '\e')"
5812
5813   blackf="${esc}[30m";   redf="${esc}[31m";    greenf="${esc}[32m"
5814   yellowf="${esc}[33m"   bluef="${esc}[34m";   purplef="${esc}[35m"
5815   cyanf="${esc}[36m";    whitef="${esc}[37m"
5816
5817   blackb="${esc}[40m";   redb="${esc}[41m";    greenb="${esc}[42m"
5818   yellowb="${esc}[43m"   blueb="${esc}[44m";   purpleb="${esc}[45m"
5819   cyanb="${esc}[46m";    whiteb="${esc}[47m"
5820
5821   boldon="${esc}[1m";    boldoff="${esc}[22m"
5822   italicson="${esc}[3m"; italicsoff="${esc}[23m"
5823   ulon="${esc}[4m";      uloff="${esc}[24m"
5824   invon="${esc}[7m";     invoff="${esc}[27m"
5825
5826   reset="${esc}[0m"
5827 }
5828
5829 # note in this first use that switching colors doesn't require a reset
5830 # first - the new color overrides the old one.
5831
5832 #clear
5833
5834 initializeANSI
5835
5836 cat << EOF
5837
5838  ${yellowf}  ▄███████▄${reset}   ${redf}  ▄██████▄${reset}    ${greenf}  ▄██████▄${reset}    ${bluef}  ▄██████▄${reset}    ${purplef}  ▄██████▄${reset}    ${cyanf}  ▄██████▄${reset}
5839  ${yellowf}▄█████████▀▀${reset}  ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset}  ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset}  ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset}  ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset}  ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5840  ${yellowf}███████▀${reset}      ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset}  ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset}  ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset}  ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset}  ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5841  ${yellowf}███████▄${reset}      ${redf}████████████${reset}  ${greenf}████████████${reset}  ${bluef}████████████${reset}  ${purplef}████████████${reset}  ${cyanf}████████████${reset}
5842  ${yellowf}▀█████████▄▄${reset}  ${redf}██▀██▀▀██▀██${reset}  ${greenf}██▀██▀▀██▀██${reset}  ${bluef}██▀██▀▀██▀██${reset}  ${purplef}██▀██▀▀██▀██${reset}  ${cyanf}██▀██▀▀██▀██${reset}
5843  ${yellowf}  ▀███████▀${reset}   ${redf}▀   ▀  ▀   ▀${reset}  ${greenf}▀   ▀  ▀   ▀${reset}  ${bluef}▀   ▀  ▀   ▀${reset}  ${purplef}▀   ▀  ▀   ▀${reset}  ${cyanf}▀   ▀  ▀   ▀${reset}
5844
5845  ${boldon}${yellowf}  ▄███████▄   ${redf}  ▄██████▄    ${greenf}  ▄██████▄    ${bluef}  ▄██████▄    ${purplef}  ▄██████▄    ${cyanf}  ▄██████▄${reset}
5846  ${boldon}${yellowf}▄█████████▀▀  ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄  ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄  ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄  ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄  ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5847  ${boldon}${yellowf}███████▀      ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███  ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███  ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███  ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███  ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5848  ${boldon}${yellowf}███████▄      ${redf}████████████  ${greenf}████████████  ${bluef}████████████  ${purplef}████████████  ${cyanf}████████████${reset}
5849  ${boldon}${yellowf}▀█████████▄▄  ${redf}██▀██▀▀██▀██  ${greenf}██▀██▀▀██▀██  ${bluef}██▀██▀▀██▀██  ${purplef}██▀██▀▀██▀██  ${cyanf}██▀██▀▀██▀██${reset}
5850  ${boldon}${yellowf}  ▀███████▀   ${redf}▀   ▀  ▀   ▀  ${greenf}▀   ▀  ▀   ▀  ${bluef}▀   ▀  ▀   ▀  ${purplef}▀   ▀  ▀   ▀  ${cyanf}▀   ▀  ▀   ▀${reset}
5851
5852 EOF
5853 #+end_src
5854
5855 *** invade-em
5856 :PROPERTIES:
5857 :header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
5858 :END:
5859
5860 #+begin_src bash
5861 #
5862 # ANSI color scheme script featuring Space Invaders
5863 #
5864 # Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5865 # Modified by lolilolicon
5866 #
5867
5868 f=3 b=4
5869 for j in f b; do
5870   for i in {0..7}; do
5871     printf -v $j$i %b "\e[${!j}${i}m"
5872   done
5873 done
5874 bld=$'\e[1m'
5875 rst=$'\e[0m'
5876
5877 cat << EOF
5878
5879  $f1  ▀▄   ▄▀     $f2 ▄▄▄████▄▄▄    $f3  ▄██▄     $f4  ▀▄   ▄▀     $f5 ▄▄▄████▄▄▄    $f6  ▄██▄  $rst
5880  $f1 ▄█▀███▀█▄    $f2███▀▀██▀▀███   $f3▄█▀██▀█▄   $f4 ▄█▀███▀█▄    $f5███▀▀██▀▀███   $f6▄█▀██▀█▄$rst
5881  $f1█▀███████▀█   $f2▀▀███▀▀███▀▀   $f3▀█▀██▀█▀   $f4█▀███████▀█   $f5▀▀███▀▀███▀▀   $f6▀█▀██▀█▀$rst
5882  $f1▀ ▀▄▄ ▄▄▀ ▀   $f2 ▀█▄ ▀▀ ▄█▀    $f3▀▄    ▄▀   $f4▀ ▀▄▄ ▄▄▀ ▀   $f5 ▀█▄ ▀▀ ▄█▀    $f6▀▄    ▄▀$rst
5883
5884  $bld$f1▄ ▀▄   ▄▀ ▄   $f2 ▄▄▄████▄▄▄    $f3  ▄██▄     $f4▄ ▀▄   ▄▀ ▄   $f5 ▄▄▄████▄▄▄    $f6  ▄██▄  $rst
5885  $bld$f1█▄█▀███▀█▄█   $f2███▀▀██▀▀███   $f3▄█▀██▀█▄   $f4█▄█▀███▀█▄█   $f5███▀▀██▀▀███   $f6▄█▀██▀█▄$rst
5886  $bld$f1▀█████████▀   $f2▀▀▀██▀▀██▀▀▀   $f3▀▀█▀▀█▀▀   $f4▀█████████▀   $f5▀▀▀██▀▀██▀▀▀   $f6▀▀█▀▀█▀▀$rst
5887  $bld$f1 ▄▀     ▀▄    $f2▄▄▀▀ ▀▀ ▀▀▄▄   $f3▄▀▄▀▀▄▀▄   $f4 ▄▀     ▀▄    $f5▄▄▀▀ ▀▀ ▀▀▄▄   $f6▄▀▄▀▀▄▀▄$rst
5888
5889
5890                                      $f7▌$rst
5891
5892                                    $f7▌$rst
5893
5894                               $f7    ▄█▄    $rst
5895                               $f7▄█████████▄$rst
5896                               $f7▀▀▀▀▀▀▀▀▀▀▀$rst
5897
5898 EOF
5899 #+end_src