[emacs,rc] add my new gnu address
[~bandali/configs] / rc.org
1 #+title: rc.org
2 #+property: header-args :comments link :mkdirp yes :results silent
3
4 * About
5
6 This org file contains the configuration files of pretty much every
7 program I use. The files are tangled (i.e. exported, or derived) from
8 this file using =org-babel=.
9
10 Note: This file is best viewed inside Emacs with org mode.
11
12 * Configs
13
14 This section contains the configuration files (dotfiles) of various
15 programs I use.
16
17 ** bspwm
18
19 *** bspwmrc
20 :PROPERTIES:
21 :header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
22 :END:
23
24 #+begin_src sh :tangle no
25 sxhkd &
26 sh ~/.fehbg &
27 xfce4-panel -d &
28 compton &
29 sleep 0.5 && pasystray --notify=all &
30
31 bspc monitor -d I II III IV V VI VII VIII IX X
32 #bspc monitor eDP-1 -d I II III IV V
33 #bspc monitor HDMI-1 -d VI VII VIII IX X
34
35 #bspc config border_width 2
36 #bspc config window_gap 8
37 bspc config window_gap 0
38
39 bspc config bottom_padding 26
40
41 bspc config split_ratio 0.52
42 bspc config borderless_monocle true
43 bspc config gapless_monocle true
44 bspc config click_to_focus button1
45 bspc config directional_focus_tightness low
46
47 #bspc rule -a Firefox desktop='^1' follow=on
48 bspc rule -a Nightly desktop='^1' follow=on
49 bspc rule -a Emacs desktop='^2' state=tiled follow=on
50 #bspc rule -a Chromium desktop='^4' follow=on
51 bspc rule -a URxvt state=floating
52 bspc rule -a URxvt:tiled state=tiled
53 bspc rule -a Connman-gtk state=floating
54 bspc rule -a Xfce4-panel state=floating
55 bspc rule -a TelegramDesktop state=floating
56 bspc rule -a Ec state=floating
57 bspc rule -a Pavucontrol state=floating
58 bspc rule -a Eog state=floating
59 bspc rule -a Seahorse state=floating
60 bspc rule -a mpv state=floating
61 bspc rule -a Evince state=floating
62 bspc rule -a Meld state=floating
63 bspc rule -a Autokey-gtk state=floating
64 bspc rule -a Mousepad state=floating
65 bspc rule -a Wrapper-1.0 state=floating
66 bspc rule -a File-roller state=floating
67 bspc rule -a Gnome-disks state=floating
68 bspc rule -a Termite state=floating
69 bspc rule -a Termite:tiled state=tiled
70 bspc rule -a Thunderbird:Calendar state=floating
71 bspc rule -a Audacity state=floating
72 bspc rule -a Proof state=floating # pvs x-show-proof
73 bspc rule -a Nm-connection-editor state=floating
74 bspc rule -a Wire state=floating
75 bspc rule -a discord state=floating
76 bspc rule -a X2goclient state=floating
77 bspc rule -a SimpleScreenRecorder state=floating
78 bspc rule -a Gimp state=floating
79 bspc rule -a Wrapper-2.0 state=floating
80 bspc rule -a Zathura state=tiled
81 #+end_src
82
83 *** sxhkdrc
84 :PROPERTIES:
85 :header-args+: :tangle ~/.config/sxhkd/sxhkdrc
86 :END:
87
88 #+begin_src conf :tangle no
89 #
90 # wm independent hotkeys
91 #
92
93 # terminal emulator
94 super + {_,shift} + Return
95 urxvt{_, -name tiled}
96
97 #super + {_,shift} + Return
98 # termite{_, --name=tiled}
99
100 # program launcher
101 super + space
102 rofi -show run -display-run '> ' -display-window ' 🗔 '
103
104 super + alt + space
105 xfce4-popup-whiskermenu
106
107 # window finder
108 super + backslash
109 rofi -show window -display-run '> ' -display-window ' 🗔 '
110
111 # password manager
112 alt + space
113 rofi-pass
114
115 # firefox
116 #super + r
117 # firefox
118
119 # chromium
120 #super + c
121 # chromium -incognito
122
123 # emacs
124 super + e
125 emacs
126
127 # make sxhkd reload its configuration files:
128 super + Escape
129 pkill -USR1 -x sxhkd
130
131 # volume {up,down}
132 XF86Audio{Raise,Lower}Volume
133 pamixer --allow-boost --{in,de}crease 5
134
135 # mute
136 XF86AudioMute
137 pamixer --toggle-mute
138
139 XF86AudioMicMute
140 pactl set-source-mute 1 toggle
141
142 # playback control
143 XF86Audio{Play,Prev,Next}
144 mpc {toggle,prev,next}
145
146 # lock the screen
147 super + shift + q
148 light-locker-command -l
149
150 # Toggle keyboard layout
151 super + F7
152 toggle-layout
153
154 # Toggle Xfce presentation mode
155 XF86LaunchB
156 toggle-presentation-mode
157
158 # monitor brightness
159 XF86MonBrightness{Up,Down}
160 light -{A,U} 5
161
162 super + apostrophe
163 rofi-light
164
165 # keyboard brightness
166 #XF86KbdBrightness{Up,Down}
167 # kbdlight {up,down}
168
169 XF86RotateWindows
170 toggle-tablet
171
172 #
173 # bspwm hotkeys
174 #
175
176 # quit bspwm normally
177 super + alt + Escape
178 bspc quit
179
180 # close and kill
181 super + {w,q}
182 bspc node -{c,k}
183
184 # alternate between the tiled and monocle layout
185 super + m
186 bspc desktop -l next
187
188 # send the newest marked node to the newest preselected node
189 super + y
190 bspc node newest.marked.local -n newest.!automatic.local
191
192 # swap the current node and the biggest node
193 super + g
194 bspc node -s biggest
195
196 #
197 # state/flags
198 #
199
200 # set the window state
201 super + {t,shift + t,s,f}
202 bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
203
204 # set the node flags
205 super + ctrl + {m,x,y,z}
206 bspc node -g {marked,locked,sticky,private}
207
208 #
209 # focus/swap
210 #
211
212 # focus the node in the given direction
213 super + {_,shift + }{h,j,k,l}
214 bspc node -{f,s} {west,south,north,east}
215
216 # focus the node for the given path jump
217 super + {p,b,comma,period}
218 bspc node -f @{parent,brother,first,second}
219
220 # focus the next/previous node in the current desktop
221 super + {_,shift + }c
222 bspc node -f {next,prev}.local
223
224 # focus the next/previous desktop in the current monitor
225 super + bracket{left,right}
226 bspc desktop -f {prev,next}.local
227
228 # send to next/prev desktop
229 super + shift + bracket{left,right}
230 bspc node -d {prev,next} --follow
231
232 # focus the last node/desktop
233 super + {grave,Tab}
234 bspc {node,desktop} -f last
235
236 # focus the older or newer node in the focus history
237 super + {o,i}
238 bspc wm -h off; \
239 bspc node {older,newer} -f; \
240 bspc wm -h on
241
242 # focus or send to the given desktop
243 super + {_,shift + }{1-9,0}
244 bspc {desktop -f,node -d} '^{1-9,10}'
245
246 #
247 # preselect
248 #
249
250 # preselect the direction
251 super + ctrl + {h,j,k,l}
252 bspc node -p {west,south,north,east}
253
254 # preselect the ratio
255 super + ctrl + {1-9}
256 bspc node -o 0.{1-9}
257
258 # cancel the preselection for the focused node
259 super + ctrl + space
260 bspc node -p cancel
261
262 # cancel the preselection for the focused desktop
263 super + ctrl + shift + space
264 bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
265
266 #
267 # move/resize
268 #
269
270 # expand a window by moving one of its side outward
271 super + alt + {h,j,k,l}
272 bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
273
274 # contract a window by moving one of its side inward
275 super + alt + shift + {h,j,k,l}
276 bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
277
278 # move a floating window
279 super + {Left,Down,Up,Right}
280 bspc node -v {-20 0,0 20,0 -20,20 0}
281
282 #alt + bracket{left,right}
283 # xdotool key --clearmodifiers ctrl+Page_{Up,Down}
284 #+end_src
285
286 ** compton
287 :PROPERTIES:
288 :header-args+: :tangle ~/.config/compton.conf
289 :END:
290
291 #+begin_src conf :tangle no
292 # Shadow
293 shadow = false; # Enabled client-side shadows on windows.
294 no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows.
295 no-dnd-shadow = true; # Don't draw shadows on DND windows.
296 clear-shadow = true; # Zero the part of the shadow's mask behind the
297 # window. Fix some weirdness with ARGB windows.
298 shadow-radius = 5; # The blur radius for shadows. (default 12)
299 shadow-offset-x = -5; # The left offset for shadows. (default -15)
300 shadow-offset-y = -5; # The top offset for shadows. (default -15)
301 # shadow-opacity = 0.7; # The translucency for shadows. (default .75)
302 # shadow-red = 0.0; # Red color value of shadow. (0.0 - 1.0, defaults to 0)
303 # shadow-green = 0.0; # Green color value of shadow. (0.0 - 1.0, defaults to 0)
304 # shadow-blue = 0.0; # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
305 shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ]; # Exclude conditions for shadows.
306 # shadow-exclude = "n:e:Notification";
307 #shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
308 shadow-ignore-shaped = true; # Avoid drawing shadow on all shaped windows
309 # (see also: --detect-rounded-corners)
310
311 # Opacity
312 menu-opacity = 1.0; # The opacity for menus. (default 1.0)
313 #inactive-opacity = 0.9; # Default opacity of inactive windows. (0.0 - 1.0)
314 # active-opacity = 0.8; # Default opacity for active windows. (0.0 - 1.0)
315 frame-opacity = 1.0; # Opacity of window titlebars and borders. (0.1 - 1.0)
316 # inactive-opacity-override = true; # Let inactive opacity set by 'inactive-opacity' overrides
317 # value of _NET_WM_OPACITY. Bad choice.
318 alpha-step = 0.06; # XRender backend: Step size for alpha pictures. Increasing
319 # it may result in less X resource usage,
320 # Yet fading may look bad.
321 #inactive-dim = 0.5; # Dim inactive windows. (0.0 - 1.0)
322 #inactive-dim-fixed = true; # Do not let dimness adjust based on window opacity.
323 # blur-background = true; # Blur background of transparent windows.
324 # Bad performance with X Render backend.
325 # GLX backend is preferred.
326 # blur-background-frame = true; # Blur background of opaque windows with transparent
327 # frames as well.
328 blur-background-fixed = true; # Do not let blur radius adjust based on window opacity.
329 blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
330 # Exclude conditions for background blur.
331
332 # Fading
333 fading = false; # Fade windows during opacity changes.
334 fade-delta = 3; # The time between steps in a fade in milliseconds. (default 10).
335 fade-in-step = 0.03; # Opacity change between steps while fading in. (default 0.028).
336 fade-out-step = 0.03; # Opacity change between steps while fading out. (default 0.03).
337 # no-fading-openclose = true; # Avoid fade windows in/out when opening/closing.
338 fade-exclude = [ ]; # Exclude conditions for fading.
339
340 # Other
341 backend = "glx" # Backend to use: "xrender" or "glx". GLX backend is typically
342 # much faster but depends on a sane driver.
343 mark-wmwin-focused = true; # Try to detect WM windows and mark them as active.
344 mark-ovredir-focused = true; # Mark all non-WM but override-redirect windows active (e.g. menus).
345 use-ewmh-active-win = true; # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
346 # instead of using FocusIn/Out events. Usually more reliable but
347 # depends on a EWMH-compliant WM.
348 detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
349 detect-client-opacity = true; # Detect _NET_WM_OPACITY on client windows, useful for window
350 # managers not passing _NET_WM_OPACITY of client windows to frame
351 # windows.
352 refresh-rate = 0; # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
353 vsync = "drm"; # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
354 # See man page for more details.
355 dbe = false; # Enable DBE painting mode. Rarely needed.
356 paint-on-overlay = true; # Painting on X Composite overlay window. Recommended.
357 sw-opti = false; # Limit compton to repaint at most once every 1 / refresh_rate.
358 # Incompatible with certain VSync methods.
359 unredir-if-possible = false; # Unredirect all windows if a full-screen opaque window is
360 # detected, to maximize performance for full-screen windows.
361 focus-exclude = [ ]; # A list of conditions of windows that should always be considered
362 # focused.
363 detect-transient = true; # Use WM_TRANSIENT_FOR to group windows, and consider windows in
364 # the same group focused at the same time.
365 detect-client-leader = true; # Use WM_CLIENT_LEADER to group windows.
366 invert-color-include = [ ]; # Conditions for windows to be painted with inverted color.
367
368 # GLX backend # GLX backend fine-tune options. See man page for more info.
369 glx-no-stencil = true; # Recommended.
370 glx-copy-from-front = false; # Useful with --glx-swap-method,
371 # glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
372 # glx-no-rebind-pixmap = true; # Recommended if it works.
373 glx-no-rebind-pixmap = true; # Recommended if it works.
374 #glx-swap-method = "4"; # See man page.
375 glx-swap-method = "4"; # See man page.
376
377 # Window type settings
378 wintypes:
379 {
380 tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
381 menu = { shadow = false; };
382 dropdown_menu = { shadow = false; };
383 popup_menu = { shadow = false; };
384 utility = { shadow = false; };
385 # fade: Fade the particular type of windows.
386 # shadow: Give those windows shadow
387 # opacity: Default opacity for the type of windows.
388 # focus: Whether to always consider windows of this type focused.
389 };
390 #+end_src
391
392 ** Dunst
393 :PROPERTIES:
394 :header-args+: :tangle ~/.config/dunst/dunstrc
395 :END:
396
397 #+begin_src conf
398 [global]
399 #font = Ubuntu Mono 10.5
400 font = Inconsolata 11
401
402 # Path to default icons.
403 icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
404
405 icon_position = left
406 # <b>bold</b>
407 # <i>italic</i>
408 # <s>strikethrough<s/>
409 # <u>underline</u>
410 markup = full
411 # The format of the message. Possible variables are:
412 # %a appname
413 # %s summary
414 # %b body
415 # %i iconname (including its path)
416 # %I iconname (without its path)
417 # %p progress value if set ([ 0%] to [100%]) or nothing
418 # Markup is allowed
419 format = "<b>%s</b>\n%b"
420 # Sort messages by urgency
421 sort = yes
422 # Show how many messages are currently hidden (because of geometry)
423 indicate_hiddenl= no
424 # Alignment of message text.
425 # Possible values are "left", "center" and "right"
426 alignment = center
427 # The frequency with wich text that is longer than the notification
428 # window allows bounces back and forth.
429 # This option conflicts with 'word_wrap'.
430 # Set to 0 to disable
431 bounce_freq = 3
432 # show age of message if message is older than show_age_threshold seconds.
433 # set to -1 to disable
434 show_age_threshold = -1
435 # split notifications into multiple lines if they don't fit into geometry
436 word_wrap = yes
437 # ignore newlines '\n' in notifications
438 ignore_newline = no
439 # The geometry of the message window.
440 # geometry [{width}]x{height}][+/-{x}+/-{y}]
441 # The height is measured in number of notifications everything else in pixels. If the width
442 # is omitted but the height is given ("-geometry x2"), the message window
443 # expands over the whole screen (dmenu-like). If width is 0,
444 # the window expands to the longest message displayed.
445 # A positive x is measured from the left, a negative from the
446 # right side of the screen. Y is measured from the top and down respectevly.
447 # The width can be negative. In this case the actual width is the
448 # screen width minus the width defined in within the geometry option.
449 #geometry = "410x12-12+12"
450 #geometry = "0x0-30-30"
451 geometry = "260x12-30-30"
452 # The transparency of the window. range: [0; 100]
453 # This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
454 transparency = 0
455 # Don't remove messages, if the user is idle (no mouse or keyboard input)
456 # for longer than idle_threshold seconds.
457 # Set to 0 to disable.
458 idle_threshold = 120
459 # Which monitor should the notifications be displayed on.
460 monitor = 0
461 # Display notification on focused monitor. Possible modes are:
462 # mouse: follow mouse pointer
463 # keyboard: follow window with keyboard focus
464 # none: don't follow anything
465 #
466 # "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
467 # This should be the case for almost all modern windowmanagers.
468 #
469 # If this option is set to mouse or keyboard, the monitor option will be
470 # ignored.
471 follow = keyboard
472 # should a notification popped up from history be sticky or
473 # timeout as if it would normally do.
474 sticky_history = yes
475 # The height of a single line. If the height is smaller than the font height,
476 # it will get raised to the font height.
477 # This adds empty space above and under the text.
478 line_height = 0
479
480 show_indicators = yes
481
482 # Draw a line of 'separatpr_height' pixel height between two notifications.
483 # Set to 0 to disable
484 separator_height = 3
485 # padding between text and separator
486 padding = 8
487 # horizontal padding
488 horizontal_padding = 8
489 # Define a color for the separator.
490 # possible values are:
491 # * auto: dunst tries to find a color fitting to the background
492 # * foreground: use the same color as the foreground
493 # * frame: use the same color as the frame.
494 # * anything else will be interpreted as a X color
495 separator_color = foreground
496 # print a notification on startup
497 # This is mainly for error detection, since dbus (re-)starts dunst
498 # automatically after a crash.
499 startup_notification = false
500 # dmenu path
501 #dmenu = /usr/bin/dmenu -p dunst:
502 dmenu = /usr/bin/rofi -dmenu -p dunst:
503 # browser for opening urls in context menu
504 browser = /usr/bin/firefox -new-tab
505 [frame]
506 width = 0
507 color = "#377222"
508 [shortcuts]
509 # shortcuts are specified as [modifier+][modifier+]...key
510 # available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
511 # and 'mod4' (windows-key)
512 # xev might be helpful to find names for keys
513 # close notification
514 close = ctrl+space
515 # close all notifications
516 close_all = ctrl+shift+space
517 # redisplay last message(s)
518 # On the US keyboard layout 'grave' is normally above TAB and left of '1'.
519 history = ctrl+shift+h
520 # context menu
521 context = ctrl+shift+period
522 [urgency_low]
523 # IMPORTANT: colors have to be defined in quotation marks.
524 # Otherwise the '#' and following would be interpreted as a comment.
525 background = "#1d2a30"
526 foreground = "#71c2af"
527 timeout = 3
528 [urgency_normal]
529 background = "#1d2a30"
530 foreground = "#71c2af"
531 timeout = 0
532 [urgency_critical]
533 background = "#1d2a30"
534 foreground = "#ff9982"
535 timeout = 0
536
537 # Every section that isn't one of the above is interpreted as a rules
538 # to override settings for certain messages.
539 # Messages can be matched by 'appname', 'summary', 'body' or 'icon'
540 # and you can override the 'timeout', 'urgency', 'foreground', 'background'
541 # and 'format'.
542 # Shell-like globbing will get expanded.
543 #
544 # SCRIPTING
545 # you can specify a script that gets run when the rule matches by setting
546 # the 'script' option.
547 # The script will be called as follows:
548 # script appname summary body icon urgency
549 # where urgency can be "LOW", "NORMAL" or "CRITICAL".
550 #
551 # NOTE: if you don't want a notification to be displayed, set the format to ""
552 # NOTE: It might be helpful to run dunst -print in a terminal in order to find
553 # fitting options for rules.
554 #[espeak]
555 # summary = "*"
556 # script = dunst_espeak.sh
557 #[script-test]
558 # summary = "*script*"
559 # script = dunst_test.sh
560 #[ignore]
561 ## This notification will not be displayed
562 # summary = "foobar"
563 # format = ""
564 #[signed_on]
565 # appname = Pidgin
566 # summary = "*signed on*"
567 # urgency = low
568 #
569 #[signed_off]
570 # appname = Pidgin
571 # summary = *signed off*
572 # urgency = low
573 #
574 #[says]
575 # appname = Pidgin
576 # summary = *says*
577 # urgency = critical
578 #
579 #[twitter]
580 # appname = Pidgin
581 # summary = *twitter.com*
582 # urgency = normal
583 #
584 [xfpm-backlight]
585 summary = *Brightness*
586 urgency = low
587 #+end_src
588
589 ** Fontconfig
590 :PROPERTIES:
591 :header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
592 :END:
593
594 #+begin_src xml
595 <?xml version="1.0"?>
596 <!DOCTYPE fontconfig SYSTEM "fonts.dtd">
597 <fontconfig>
598 <match target="font">
599 <edit mode="assign" name="rgba">
600 <const>rgb</const>
601 </edit>
602 </match>
603 <match target="font">
604 <edit mode="assign" name="hinting">
605 <bool>true</bool>
606 </edit>
607 </match>
608 <match target="font">
609 <edit mode="assign" name="hintstyle">
610 <const>hintslight</const>
611 </edit>
612 </match>
613 <match target="font">
614 <edit mode="assign" name="antialias">
615 <bool>true</bool>
616 </edit>
617 </match>
618 <match target="font">
619 <edit mode="assign" name="lcdfilter">
620 <const>lcddefault</const>
621 </edit>
622 </match>
623 <dir>~/.fonts</dir>
624
625 <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
626 <alias binding="same">
627 <family>Helvetica</family>
628 <accept>
629 <family>Liberation Sans</family>
630 </accept>
631 </alias>
632 </fontconfig>
633 #+end_src
634
635 ** Git
636
637 *** gitconfig
638 :PROPERTIES:
639 :header-args+: :tangle ~/.gitconfig
640 :END:
641
642 **** user
643 #+begin_src conf
644 [user]
645 name = Amin Bandali
646 email = mab@gnu.org
647 signingkey = 4E05246AB0BF7FFB
648 #+end_src
649
650 **** signing
651 #+begin_src conf
652 [commit]
653 gpgsign = true
654 # [format]
655 # signoff = true
656 #+end_src
657
658 **** core
659 #+begin_src conf
660 [core]
661 autocrlf = input # CRLF -> LF on commit
662 editor = emacsclient -t
663 excludesfile = ~/.gitignore_global
664 pager = "less"
665 #+end_src
666
667 **** gpg
668 #+begin_src conf
669 [gpg]
670 program = gpg2
671 #+end_src
672
673 **** alias
674 #+begin_src conf
675 [alias]
676 git = !exec git # handle nested git calls, e.g. git git status
677 aliases = config --get-regexp '^alias\\.'
678 a = add
679 s = status
680 sl = status --long
681 c = checkout
682 cb = checkout -b
683 b = branch
684 r = rebase
685 p = pull
686 pr = pull --rebase
687 ps = push
688 psf = push --force
689 #+end_src
690
691 **** color
692 #+begin_src conf
693 [color]
694 ui = auto
695 [color "status"]
696 added = green bold
697 changed = red bold
698 untracked = red bold
699 [color "branch"]
700 current = green bold
701 remote = magenta bold
702 [color "diff"]
703 new = green bold
704 old = red bold
705 #+end_src
706
707 **** status
708 #+begin_src conf
709 [status]
710 # showUntrackedFiles = all
711 short=true
712 branch=true
713 #+end_src
714
715 **** github
716 #+begin_src conf
717 [github]
718 user = aminb
719 #+end_src
720
721 **** send-email
722 #+begin_src conf
723 [sendemail]
724 smtpuser = aminb
725 smtpserver = fencepost.gnu.org
726 smtpserverport = 587
727 smtpencryption = tls
728 annotate = yes
729 #+end_src
730
731 *** gitignore
732 :PROPERTIES:
733 :header-args+: :tangle ~/.gitignore_global
734 :END:
735
736 #+begin_src conf
737 *.orig
738 *.py[co]
739 *.sublime-workspace
740 *~
741 .DS_Store
742 *.elc
743 *-autoloads.el
744 #+end_src
745
746 ** [[https://github.com/Leinnan/i3gs][i3gs]]
747 :PROPERTIES:
748 :header-args+: :tangle ~/.config/i3gs/config
749 :END:
750
751 #+begin_src conf :comments none
752 borders_width=0 0 2 0
753 separator_width=10
754
755 #[mpd]
756 #preset=MPD
757 #title=<span weight='heavy' fgcolor='#7FDBFF'> </span>
758 #borders_color=#7FDBFF
759
760 [ram]
761 preset=RAM
762 title=<span weight='heavy' fgcolor='#3D9970'> </span>
763 borders_color=#3D9970
764
765 #[cpu]
766 #preset=CPU
767 #title=<span weight='heavy' fgcolor='#2ECC40'> </span>
768 #borders_color=#2ECC40
769
770 #[hdd]
771 #preset=HDD
772 #title=<span weight='heavy' fgcolor='#01FF70'> </span>
773 #borders_color=#01FF70
774
775 [volume]
776 command=volume-info
777 title=<span weight='heavy' fgcolor='#7FDBFF'></span>
778 borders_color=#7FDBFF
779
780 [battery]
781 preset=BAT
782 command=battery-percentage-time
783 title=<span weight='heavy' fgcolor='#39CCCC'> </span>
784 borders_color=#39CCCC
785
786 [wifi]
787 preset=WIFI
788 title=<span weight='heavy' fgcolor='#01FF70'> </span>
789 borders_color=#01FF70
790
791 [date]
792 preset=DATE
793 command=date '+%-I:%M, %a %b %d '
794 title=<span weight='heavy' fgcolor='#FFDC00'> </span>
795 borders_color=#FFDC00
796 separator_width=0
797 #+end_src
798 ** Latexmk
799 :PROPERTIES:
800 :header-args+: :tangle ~/.latexmkrc
801 :END:
802
803 #+begin_src conf
804 $pdf_previewer = "start zathura %O %S";
805 $clean_ext = "aux out";
806
807 # $pdf_update_method = 4;
808 # $pdf_update_command = "zathura %O %S";
809
810 # Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
811 # by Ctrl+click in the PDF.
812 # Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
813 # editor.
814 # $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
815 #+end_src
816
817 ** libinput
818
819 Improve XPS 15 9560's touchpad experience.
820
821 # begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
822 #+begin_src conf :tangle no
823 Section "InputClass"
824 Identifier "libinput touchpad catchall"
825 Driver "libinput"
826 MatchIsTouchpad "on"
827 Option "ClickMethod" "clickfinger"
828 Option "NaturalScrolling" "true"
829 Option "Tapping" "on"
830 Option "TappingButtonMap" "lrm"
831 EndSection
832 #+end_src
833
834 ** getmail
835
836 *** getmailrc
837 :PROPERTIES:
838 :header-args+: :tangle ~/.getmail/getmailrc
839 :END:
840
841 #+begin_src conf
842 [retriever]
843 type = SimplePOP3SSLRetriever
844 server = fencepost.gnu.org
845 username = aminb
846 password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
847 port = 995
848 use_apop = True
849
850 [destination]
851 type = Maildir
852 path = ~/mail/gnu/Inbox/
853
854 [options]
855 delete = True
856 #+end_src
857
858 *** getmail.service
859 :PROPERTIES:
860 :header-args+: :tangle ~/.config/systemd/user/getmail.service
861 :END:
862
863 #+begin_src conf :tangle no
864 [Unit]
865 Description=getmail service
866
867 [Service]
868 Type=oneshot
869 ExecStart=/usr/bin/getmail
870 StandardOutput=syslog
871 StandardError=syslog
872 #+end_src
873
874 *** getmail.timer
875 :PROPERTIES:
876 :header-args+: :tangle ~/.config/systemd/user/getmail.timer
877 :END:
878
879 #+begin_src conf :tangle no
880 [Unit]
881 Description=getmail timer
882
883 [Timer]
884 OnCalendar=*:0/30
885 Persistent=true
886 Unit=getmail.service
887
888 [Install]
889 WantedBy=timers.target
890 #+end_src
891
892 ** GnuPG
893 :PROPERTIES:
894 :header-args+: :tangle ~/.gnupg/gpg-agent.conf
895 :END:
896
897 #+begin_src conf
898 default-cache-ttl 43200
899 max-cache-ttl 43200
900
901 default-cache-ttl-ssh 10800
902 max-cache-ttl-ssh 10800
903
904 # pinentry-program /usr/bin/pinentry-qt
905 #+end_src
906
907 ** GTK
908
909 *** gtk-2.0
910 :PROPERTIES:
911 :header-args+: :tangle ~/.gtkrc-2.0
912 :END:
913
914 #+begin_src conf
915 gtk-theme-name="Greybird"
916 gtk-icon-theme-name="Paper"
917 gtk-font-name="Ubuntu 10"
918 gtk-menu-images=0
919 # gtk-key-theme-name = "Emacs"
920 #+end_src
921
922 *** gtk-3.0
923 :PROPERTIES:
924 :header-args+: :tangle ~/.config/gtk-3.0/settings.ini
925 :END:
926
927 #+begin_src conf :tangle no
928 [Settings]
929 gtk-icon-theme-name = Paper
930 # gtk-theme-name = Adwaita
931
932 gtk-theme-name = Greybird
933 # gtk-theme-name = Arc-Darker
934 # gtk-theme-name = Numix-ArchBlue
935
936 gtk-font-name = Ubuntu 10
937 # gtk-key-theme-name = Emacs
938 #+end_src
939
940 ** isync
941
942 *** mbsyncrc
943 :PROPERTIES:
944 :header-args+: :tangle ~/.mbsyncrc
945 :END:
946
947 #+begin_src conf
948 # Global defaults
949 CopyArrivalDate yes
950
951 ######
952 IMAPAccount amin
953 Host nix.aminb.org
954 User amin@aminb.org
955 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
956 SSLType IMAPS
957
958 IMAPStore amin-remote
959 Account amin
960
961 MaildirStore amin-local
962 Path ~/mail/amin/
963 Inbox ~/mail/amin/Inbox
964 SubFolders Verbatim
965
966 Channel amin
967 Master :amin-remote:
968 Slave :amin-local:
969 Patterns * !dovecot*
970 Create Both
971 SyncState *
972
973 ######
974 IMAPAccount uwaterloo
975 Host connect.uwaterloo.ca
976 User abandali
977 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
978 SSLType IMAPS
979
980 IMAPStore uwaterloo-remote
981 Account uwaterloo
982
983 MaildirStore uwaterloo-local
984 Path ~/mail/uwaterloo/
985 Inbox ~/mail/uwaterloo/Inbox
986 SubFolders Verbatim
987
988 Channel uwaterloo
989 Master :uwaterloo-remote:
990 Slave :uwaterloo-local:
991 Patterns * !dovecot*
992 Create Both
993 SyncState *
994 #+end_src
995
996 *** mbsync.service
997 :PROPERTIES:
998 :header-args+: :tangle ~/.config/systemd/user/mbsync.service
999 :END:
1000
1001 #+begin_src conf :tangle no
1002 [Unit]
1003 Description=mbsync service
1004
1005 [Service]
1006 Type=oneshot
1007 ExecStart=/usr/bin/mbsync -Va
1008 StandardOutput=syslog
1009 StandardError=syslog
1010 #+end_src
1011
1012 *** mbsync.timer
1013 :PROPERTIES:
1014 :header-args+: :tangle ~/.config/systemd/user/mbsync.timer
1015 :END:
1016
1017 #+begin_src conf :tangle no
1018 [Unit]
1019 Description=mbsync timer
1020
1021 [Timer]
1022 OnCalendar=*:0/15
1023 Persistent=true
1024 Unit=mbsync.service
1025
1026 [Install]
1027 WantedBy=timers.target
1028 #+end_src
1029
1030 ** mpd
1031 :PROPERTIES:
1032 :header-args+: :tangle ~/.config/mpd/mpd.conf
1033 :END:
1034
1035 #+begin_src conf
1036 # An example configuration file for MPD.
1037 # Read the user manual for documentation: http://www.musicpd.org/doc/user/
1038
1039
1040 # Files and directories #######################################################
1041 #
1042 # This setting controls the top directory which MPD will search to discover the
1043 # available audio files and add them to the daemon's online database. This
1044 # setting defaults to the XDG directory, otherwise the music directory will be
1045 # be disabled and audio files will only be accepted over ipc socket (using
1046 # file:// protocol) or streaming files over an accepted protocol.
1047 #
1048 music_directory "~/usr/music"
1049 #
1050 # This setting sets the MPD internal playlist directory. The purpose of this
1051 # directory is storage for playlists created by MPD. The server will use
1052 # playlist files not created by the server but only if they are in the MPD
1053 # format. This setting defaults to playlist saving being disabled.
1054 #
1055 playlist_directory "~/.mpd/playlists"
1056 #
1057 # This setting sets the location of the MPD database. This file is used to
1058 # load the database at server start up and store the database while the
1059 # server is not up. This setting defaults to disabled which will allow
1060 # MPD to accept files over ipc socket (using file:// protocol) or streaming
1061 # files over an accepted protocol.
1062 #
1063 db_file "~/.mpd/database"
1064 #
1065 # These settings are the locations for the daemon log files for the daemon.
1066 # These logs are great for troubleshooting, depending on your log_level
1067 # settings.
1068 #
1069 # The special value "syslog" makes MPD use the local syslog daemon. This
1070 # setting defaults to logging to syslog, otherwise logging is disabled.
1071 #
1072 log_file "~/.mpd/log"
1073 #
1074 # This setting sets the location of the file which stores the process ID
1075 # for use of mpd --kill and some init scripts. This setting is disabled by
1076 # default and the pid file will not be stored.
1077 #
1078 pid_file "~/.mpd/pid"
1079 #
1080 # This setting sets the location of the file which contains information about
1081 # most variables to get MPD back into the same general shape it was in before
1082 # it was brought down. This setting is disabled by default and the server
1083 # state will be reset on server start up.
1084 #
1085 state_file "~/.mpd/state"
1086 #
1087 # The location of the sticker database. This is a database which
1088 # manages dynamic information attached to songs.
1089 #
1090 sticker_file "~/.mpd/sticker.sql"
1091 #
1092 ###############################################################################
1093
1094
1095 # General music daemon options ################################################
1096 #
1097 # This setting specifies the user that MPD will run as. MPD should never run as
1098 # root and you may use this setting to make MPD change its user ID after
1099 # initialization. This setting is disabled by default and MPD is run as the
1100 # current user.
1101 #
1102 #user "nobody"
1103 #
1104 # This setting specifies the group that MPD will run as. If not specified
1105 # primary group of user specified with "user" setting will be used (if set).
1106 # This is useful if MPD needs to be a member of group such as "audio" to
1107 # have permission to use sound card.
1108 #
1109 #group "nogroup"
1110 #
1111 # This setting sets the address for the daemon to listen on. Careful attention
1112 # should be paid if this is assigned to anything other then the default, any.
1113 # This setting can deny access to control of the daemon. Not effective if
1114 # systemd socket activiation is in use.
1115 #
1116 # For network
1117 #bind_to_address "any"
1118 #
1119 # And for Unix Socket
1120 #bind_to_address "~/.mpd/socket"
1121 #
1122 # This setting is the TCP port that is desired for the daemon to get assigned
1123 # to.
1124 #
1125 #port "6600"
1126 #
1127 # This setting controls the type of information which is logged. Available
1128 # setting arguments are "default", "secure" or "verbose". The "verbose" setting
1129 # argument is recommended for troubleshooting, though can quickly stretch
1130 # available resources on limited hardware storage.
1131 #
1132 #log_level "default"
1133 #
1134 # If you have a problem with your MP3s ending abruptly it is recommended that
1135 # you set this argument to "no" to attempt to fix the problem. If this solves
1136 # the problem, it is highly recommended to fix the MP3 files with vbrfix
1137 # (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
1138 # point gapless MP3 playback can be enabled.
1139 #
1140 #gapless_mp3_playback "yes"
1141 #
1142 # Setting "restore_paused" to "yes" puts MPD into pause mode instead
1143 # of starting playback after startup.
1144 #
1145 #restore_paused "no"
1146 #
1147 # This setting enables MPD to create playlists in a format usable by other
1148 # music players.
1149 #
1150 #save_absolute_paths_in_playlists "no"
1151 #
1152 # This setting defines a list of tag types that will be extracted during the
1153 # audio file discovery process. The complete list of possible values can be
1154 # found in the user manual.
1155 #metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
1156 #
1157 # This setting enables automatic update of MPD's database when files in
1158 # music_directory are changed.
1159 #
1160 #auto_update "yes"
1161 #
1162 # Limit the depth of the directories being watched, 0 means only watch
1163 # the music directory itself. There is no limit by default.
1164 #
1165 #auto_update_depth "3"
1166 #
1167 ###############################################################################
1168
1169
1170 # Symbolic link behavior ######################################################
1171 #
1172 # If this setting is set to "yes", MPD will discover audio files by following
1173 # symbolic links outside of the configured music_directory.
1174 #
1175 #follow_outside_symlinks "yes"
1176 #
1177 # If this setting is set to "yes", MPD will discover audio files by following
1178 # symbolic links inside of the configured music_directory.
1179 #
1180 #follow_inside_symlinks "yes"
1181 #
1182 ###############################################################################
1183
1184
1185 # Zeroconf / Avahi Service Discovery ##########################################
1186 #
1187 # If this setting is set to "yes", service information will be published with
1188 # Zeroconf / Avahi.
1189 #
1190 #zeroconf_enabled "yes"
1191 #
1192 # The argument to this setting will be the Zeroconf / Avahi unique name for
1193 # this MPD server on the network.
1194 #
1195 #zeroconf_name "Music Player"
1196 #
1197 ###############################################################################
1198
1199
1200 # Permissions #################################################################
1201 #
1202 # If this setting is set, MPD will require password authorization. The password
1203 # setting can be specified multiple times for different password profiles.
1204 #
1205 #password "password@read,add,control,admin"
1206 #
1207 # This setting specifies the permissions a user has who has not yet logged in.
1208 #
1209 #default_permissions "read,add,control,admin"
1210 #
1211 ###############################################################################
1212
1213
1214 # Database #######################################################################
1215 #
1216
1217 #database {
1218 # plugin "proxy"
1219 # host "other.mpd.host"
1220 # port "6600"
1221 #}
1222
1223 # Input #######################################################################
1224 #
1225
1226 input {
1227 plugin "curl"
1228 # proxy "proxy.isp.com:8080"
1229 # proxy_user "user"
1230 # proxy_password "password"
1231 }
1232
1233 #
1234 ###############################################################################
1235
1236 # Audio Output ################################################################
1237 #
1238
1239 audio_output {
1240 type "pulse"
1241 name "pulse audio"
1242 }
1243
1244 audio_output {
1245 type "fifo"
1246 name "my_fifo"
1247 path "/tmp/mpd.fifo"
1248 format "44100:16:2"
1249 }
1250
1251 # MPD supports various audio output types, as well as playing through multiple
1252 # audio outputs at the same time, through multiple audio_output settings
1253 # blocks. Setting this block is optional, though the server will only attempt
1254 # autodetection for one sound card.
1255 #
1256 # An example of an ALSA output:
1257 #
1258 #audio_output {
1259 # type "alsa"
1260 # name "My ALSA Device"
1261 ## device "hw:0,0" # optional
1262 ## mixer_type "hardware" # optional
1263 ## mixer_device "default" # optional
1264 ## mixer_control "PCM" # optional
1265 ## mixer_index "0" # optional
1266 #}
1267 #
1268 # An example of an OSS output:
1269 #
1270 #audio_output {
1271 # type "oss"
1272 # name "My OSS Device"
1273 ## device "/dev/dsp" # optional
1274 ## mixer_type "hardware" # optional
1275 ## mixer_device "/dev/mixer" # optional
1276 ## mixer_control "PCM" # optional
1277 #}
1278 #
1279 # An example of a shout output (for streaming to Icecast):
1280 #
1281 #audio_output {
1282 # type "shout"
1283 # encoder "vorbis" # optional
1284 # name "My Shout Stream"
1285 # host "localhost"
1286 # port "8000"
1287 # mount "/mpd.ogg"
1288 # password "hackme"
1289 # quality "5.0"
1290 # bitrate "128"
1291 # format "44100:16:1"
1292 ## protocol "icecast2" # optional
1293 ## user "source" # optional
1294 ## description "My Stream Description" # optional
1295 ## url "http://example.com" # optional
1296 ## genre "jazz" # optional
1297 ## public "no" # optional
1298 ## timeout "2" # optional
1299 ## mixer_type "software" # optional
1300 #}
1301 #
1302 # An example of a recorder output:
1303 #
1304 #audio_output {
1305 # type "recorder"
1306 # name "My recorder"
1307 # encoder "vorbis" # optional, vorbis or lame
1308 # path "/var/lib/mpd/recorder/mpd.ogg"
1309 ## quality "5.0" # do not define if bitrate is defined
1310 # bitrate "128" # do not define if quality is defined
1311 # format "44100:16:1"
1312 #}
1313 #
1314 # An example of a httpd output (built-in HTTP streaming server):
1315 #
1316 #audio_output {
1317 # type "httpd"
1318 # name "My HTTP Stream"
1319 # encoder "vorbis" # optional, vorbis or lame
1320 # port "8000"
1321 # bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
1322 ## quality "5.0" # do not define if bitrate is defined
1323 # bitrate "128" # do not define if quality is defined
1324 # format "44100:16:1"
1325 # max_clients "0" # optional 0=no limit
1326 #}
1327 #
1328 # An example of a pulseaudio output (streaming to a remote pulseaudio server)
1329 #
1330 #audio_output {
1331 # type "pulse"
1332 # name "My Pulse Output"
1333 ## server "remote_server" # optional
1334 ## sink "remote_server_sink" # optional
1335 #}
1336 #
1337 # An example of a winmm output (Windows multimedia API).
1338 #
1339 #audio_output {
1340 # type "winmm"
1341 # name "My WinMM output"
1342 ## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1343 # or
1344 ## device "0" # optional
1345 ## mixer_type "hardware" # optional
1346 #}
1347 #
1348 # An example of an openal output.
1349 #
1350 #audio_output {
1351 # type "openal"
1352 # name "My OpenAL output"
1353 ## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1354 #}
1355 #
1356 # An example of an sndio output.
1357 #
1358 #audio_output {
1359 # type "sndio"
1360 # name "sndio output"
1361 # mixer_type "software"
1362 #}
1363 #
1364 # An example of an OS X output:
1365 #
1366 #audio_output {
1367 # type "osx"
1368 # name "My OS X Device"
1369 ## device "Built-in Output" # optional
1370 ## channel_map "-1,-1,0,1" # optional
1371 #}
1372 #
1373 ## Example "pipe" output:
1374 #
1375 #audio_output {
1376 # type "pipe"
1377 # name "my pipe"
1378 # command "aplay -f cd 2>/dev/null"
1379 ## Or if you're want to use AudioCompress
1380 # command "AudioCompress -m | aplay -f cd 2>/dev/null"
1381 ## Or to send raw PCM stream through PCM:
1382 # command "nc example.org 8765"
1383 # format "44100:16:2"
1384 #}
1385 #
1386 ## An example of a null output (for no audio output):
1387 #
1388 #audio_output {
1389 # type "null"
1390 # name "My Null Output"
1391 # mixer_type "none" # optional
1392 #}
1393 #
1394 ###############################################################################
1395
1396
1397 # Normalization automatic volume adjustments ##################################
1398 #
1399 # This setting specifies the type of ReplayGain to use. This setting can have
1400 # the argument "off", "album", "track" or "auto". "auto" is a special mode that
1401 # chooses between "track" and "album" depending on the current state of
1402 # random playback. If random playback is enabled then "track" mode is used.
1403 # See <http://www.replaygain.org> for more details about ReplayGain.
1404 # This setting is off by default.
1405 #
1406 #replaygain "album"
1407 #
1408 # This setting sets the pre-amp used for files that have ReplayGain tags. By
1409 # default this setting is disabled.
1410 #
1411 #replaygain_preamp "0"
1412 #
1413 # This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1414 # By default this setting is disabled.
1415 #
1416 #replaygain_missing_preamp "0"
1417 #
1418 # This setting enables or disables ReplayGain limiting.
1419 # MPD calculates actual amplification based on the ReplayGain tags
1420 # and replaygain_preamp / replaygain_missing_preamp setting.
1421 # If replaygain_limit is enabled MPD will never amplify audio signal
1422 # above its original level. If replaygain_limit is disabled such amplification
1423 # might occur. By default this setting is enabled.
1424 #
1425 #replaygain_limit "yes"
1426 #
1427 # This setting enables on-the-fly normalization volume adjustment. This will
1428 # result in the volume of all playing audio to be adjusted so the output has
1429 # equal "loudness". This setting is disabled by default.
1430 #
1431 #volume_normalization "no"
1432 #
1433 ###############################################################################
1434
1435 # Character Encoding ##########################################################
1436 #
1437 # If file or directory names do not display correctly for your locale then you
1438 # may need to modify this setting.
1439 #
1440 #filesystem_charset "UTF-8"
1441 #
1442 ###############################################################################
1443 #+end_src
1444
1445 ** msmtp
1446 :PROPERTIES:
1447 :header-args+: :tangle ~/.msmtprc
1448 :END:
1449
1450 #+begin_src conf
1451 # Set default values for all following accounts.
1452 defaults
1453 port 587
1454 tls on
1455 auth on
1456 #tls_trust_file /etc/ssl/certs/ca-certificates.crt
1457 logfile ~/.msmtp.log
1458
1459 # aminb
1460 account aminb
1461 host nix.aminb.org
1462 tls_fingerprint 65:DD:B8:32:D8:CD:F1:DC:B6:34:EE:35:04:18:AC:09:F3:1D:6D:20:F2:4A:E2:BD:64:48:B7:1F:90:BD:C4:BA
1463 tls_starttls on
1464 from amin@aminb.org
1465 user amin@aminb.org
1466 passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
1467
1468 # gnu
1469 account gnu
1470 host fencepost.gnu.org
1471 # use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1472 tls_fingerprint 28:70:42:76:1C:EC:91:5F:D1:B3:27:A1:CD:3B:32:A4:8B:0B:DC:3A:CD:CA:F6:6F:E4:61:BA:69:D7:4D:0D:0B
1473 tls_starttls on
1474 from aminb@gnu.org
1475 user aminb
1476 passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
1477
1478 # gnu (new address)
1479 account gnu-mab : gnu
1480 from mab@gnu.org
1481
1482 # uwaterloo
1483 account uwaterloo
1484 host connect.uwaterloo.ca
1485 tls_starttls on
1486 from abandali@uwaterloo.ca
1487 user abandali
1488 passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
1489 tls_trust_file /etc/ssl/certs/ca-certificates.crt
1490
1491 # Set a default account
1492 account default : aminb
1493 #+end_src
1494
1495 ** ncmpcpp
1496
1497 *** config
1498 :PROPERTIES:
1499 :header-args+: :tangle ~/.ncmpcpp/config
1500 :END:
1501
1502 #+begin_src conf :tangle no
1503 ##############################################################
1504 ## This is the example configuration file. Copy it to ##
1505 ## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
1506 ## and set up your preferences. ##
1507 ##############################################################
1508 #
1509 ##### directories ######
1510 ##
1511 ## Directory for storing ncmpcpp related files.
1512 ## Changing it is useful if you want to store
1513 ## everything somewhere else and provide command
1514 ## line setting for alternative location to config
1515 ## file which defines that while launching ncmpcpp.
1516 ##
1517 #
1518 ncmpcpp_directory = ~/.ncmpcpp
1519 #
1520 ##
1521 ## Directory for storing downloaded lyrics. It
1522 ## defaults to ~/.lyrics since other MPD clients
1523 ## (eg. ncmpc) also use that location.
1524 ##
1525 #
1526 #lyrics_directory = ~/.lyrics
1527 #
1528 ##### connection settings #####
1529 #
1530 #mpd_host = localhost
1531 #
1532 #mpd_port = 6600
1533 #
1534 #mpd_connection_timeout = 5
1535 #
1536 ## Needed for tag editor and file operations to work.
1537 ##
1538 mpd_music_dir = ~/usr/music
1539 #
1540 #mpd_crossfade_time = 5
1541 #
1542 ##### music visualizer #####
1543 ##
1544 ## Note: In order to make music visualizer work you'll
1545 ## need to use mpd fifo output, whose format parameter
1546 ## has to be set to 44100:16:1 for mono visualization
1547 ## or 44100:16:2 for stereo visualization. Example
1548 ## configuration (it has to be put into mpd.conf):
1549 ##
1550 ## audio_output {
1551 ## type "fifo"
1552 ## name "Visualizer feed"
1553 ## path "/tmp/mpd.fifo"
1554 ## format "44100:16:2"
1555 ## }
1556 ##
1557 #
1558 visualizer_fifo_path = /tmp/mpd.fifo
1559 #
1560 ##
1561 ## Note: Below parameter is needed for ncmpcpp
1562 ## to determine which output provides data for
1563 ## visualizer and thus allow syncing between
1564 ## visualization and sound as currently there
1565 ## are some problems with it.
1566 ##
1567 #
1568 visualizer_output_name = my fifo
1569 #
1570 ##
1571 ## If you set format to 44100:16:2, make it 'yes'.
1572 ##
1573 visualizer_in_stereo = yes
1574 #
1575 ##
1576 ## Multiply received samples by given value. Very
1577 ## useful for proper visualization of quiet music.
1578 ##
1579 #visualizer_sample_multiplier = 1
1580 #
1581 ##
1582 ## Note: Below parameter defines how often ncmpcpp
1583 ## has to "synchronize" visualizer and audio outputs.
1584 ## 30 seconds is optimal value, but if you experience
1585 ## synchronization problems, set it to lower value.
1586 ## Keep in mind that sane values start with >=10.
1587 ##
1588 #
1589 visualizer_sync_interval = 30
1590 #
1591 ##
1592 ## Note: To enable spectrum frequency visualization
1593 ## you need to compile ncmpcpp with fftw3 support.
1594 ##
1595 #
1596 ## Available values: spectrum, wave, wave_filled, ellipse.
1597 ##
1598 visualizer_type = spectrum
1599 #
1600 #visualizer_look = ●▮
1601 visualizer_look = "●•"
1602 #
1603 #visualizer_color = blue, cyan, green, yellow, magenta, red
1604 #
1605 ## Alternative subset of 256 colors for terminals that support it.
1606 ##
1607 #visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
1608 #
1609 ##### system encoding #####
1610 ##
1611 ## ncmpcpp should detect your charset encoding
1612 ## but if it failed to do so, you can specify
1613 ## charset encoding you are using here.
1614 ##
1615 ## Note: You can see whether your ncmpcpp build
1616 ## supports charset detection by checking output
1617 ## of `ncmpcpp --version`.
1618 ##
1619 ## Note: Since MPD uses UTF-8 by default, setting
1620 ## this option makes sense only if your encoding
1621 ## is different.
1622 ##
1623 #
1624 #system_encoding = ""
1625 #
1626 ##### delays #####
1627 #
1628 ## Time of inactivity (in seconds) after playlist
1629 ## highlighting will be disabled (0 = always on).
1630 ##
1631 #playlist_disable_highlight_delay = 5
1632 #
1633 ## Defines how long messages are supposed to be visible.
1634 ##
1635 #message_delay_time = 5
1636 #
1637 ##### song format #####
1638 ##
1639 ## For a song format you can use:
1640 ##
1641 ## %l - length
1642 ## %f - filename
1643 ## %D - directory
1644 ## %a - artist
1645 ## %A - album artist
1646 ## %t - title
1647 ## %b - album
1648 ## %y - date
1649 ## %n - track number (01/12 -> 01)
1650 ## %N - full track info (01/12 -> 01/12)
1651 ## %g - genre
1652 ## %c - composer
1653 ## %p - performer
1654 ## %d - disc
1655 ## %C - comment
1656 ## %P - priority
1657 ## $R - begin right alignment
1658 ##
1659 ## If you want to make sure that a part of the format is displayed
1660 ## only when certain tags are present, you can archieve it by
1661 ## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
1662 ## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
1663 ## It is also possible to define a list of alternatives by providing
1664 ## several groups and separating them with '|', e.g. '{%t}|{%f}'
1665 ## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
1666 ## present.
1667 ##
1668 ## Note: If you want to set limit on maximal length of a tag, just
1669 ## put the appropriate number between % and character that defines
1670 ## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
1671 ##
1672 ## In addition, formats support markers used for text attributes.
1673 ## They are followed by character '$'. After that you can put:
1674 ##
1675 ## - 0 - default window color (discards all other colors)
1676 ## - 1 - black
1677 ## - 2 - red
1678 ## - 3 - green
1679 ## - 4 - yellow
1680 ## - 5 - blue
1681 ## - 6 - magenta
1682 ## - 7 - cyan
1683 ## - 8 - white
1684 ## - 9 - end of current color
1685 ## - b - bold text
1686 ## - u - underline text
1687 ## - r - reverse colors
1688 ## - a - use alternative character set
1689 ##
1690 ## If you don't want to use a non-color attribute anymore, just put it
1691 ## again, but this time insert character '/' between '$' and attribute
1692 ## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
1693 ## or filename with reversed colors.
1694 ##
1695 ## If you want to use 256 colors and/or background colors in formats
1696 ## (the naming scheme is described below in section about color
1697 ## definitions), it can be done with the syntax $(COLOR), e.g. to set
1698 ## the artist tag to one of the non-standard colors and make it have
1699 ## yellow background, you need to write $(197_yellow)%a$(end). Note
1700 ## that for standard colors this is interchangable with attributes
1701 ## listed above.
1702 ##
1703 ## Note: colors can be nested.
1704 ##
1705 #
1706 #song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
1707 #
1708 #song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
1709 #
1710 #song_library_format = {%n - }{%t}|{%f}
1711 #
1712 #
1713 #alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
1714 #
1715 #alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
1716 #
1717 #now_playing_prefix = $b
1718 #
1719 #now_playing_suffix = $/b
1720 #
1721 #browser_playlist_prefix = "$2playlist$9 "
1722 #
1723 #selected_item_prefix = $6
1724 #
1725 #selected_item_suffix = $9
1726 #
1727 #modified_item_prefix = $3> $9
1728 #
1729 ##
1730 ## Note: attributes are not supported for the following variables.
1731 ##
1732 #song_window_title_format = {%a - }{%t}|{%f}
1733 ##
1734 ## Note: Below variables are used for sorting songs in browser.
1735 ## The sort mode determines how songs are sorted, and can be used
1736 ## in combination with a sort format to specify a custom sorting format.
1737 ## Available values for browser_sort_mode are "name", "mtime", "format"
1738 ## and "noop".
1739 ##
1740 #
1741 #browser_sort_mode = name
1742 #
1743 #browser_sort_format = {%a - }{%t}|{%f} {(%l)}
1744 #
1745 ##### columns settings #####
1746 ##
1747 ## syntax of song columns list format is "column column etc."
1748 ##
1749 ## - syntax for each column is:
1750 ##
1751 ## (width of the column)[color of the column]{displayed tag}
1752 ##
1753 ## Note: Width is by default in %, if you want a column to
1754 ## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
1755 ## will be the column that take 10% of screen (so the real width
1756 ## will depend on actual screen size), whereas (10f)[white]{a}
1757 ## will take 10 terminal cells, no matter how wide the screen is.
1758 ##
1759 ## - color is optional (if you want the default one,
1760 ## leave the field empty).
1761 ##
1762 ## Note: You can give a column additional attributes by putting appropriate
1763 ## character after displayed tag character. Available attributes are:
1764 ##
1765 ## - r - column will be right aligned
1766 ## - E - if tag is empty, empty tag marker won't be displayed
1767 ##
1768 ## You can also:
1769 ##
1770 ## - give a column custom name by putting it after attributes,
1771 ## separated with character ':', e.g. {lr:Length} gives you
1772 ## right aligned column of lengths named "Length".
1773 ##
1774 ## - define sequence of tags, that have to be displayed in case
1775 ## predecessor is empty in a way similar to the one in classic
1776 ## song format, i.e. using '|' character, e.g. {a|c|p:Owner}
1777 ## creates column named "Owner" that tries to display artist
1778 ## tag and then composer and performer if previous ones are
1779 ## not available.
1780 ##
1781 #
1782 #song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
1783 #
1784 ##### various settings #####
1785 #
1786 ##
1787 ## Note: Custom command that will be executed each
1788 ## time song changes. Useful for notifications etc.
1789 ##
1790 #execute_on_song_change = ""
1791 #
1792 #playlist_show_mpd_host = no
1793 #
1794 #playlist_show_remaining_time = no
1795 #
1796 #playlist_shorten_total_times = no
1797 #
1798 #playlist_separate_albums = no
1799 #
1800 ##
1801 ## Note: Possible display modes: classic, columns.
1802 ##
1803 #playlist_display_mode = columns
1804 #
1805 #browser_display_mode = classic
1806 #
1807 #search_engine_display_mode = classic
1808 #
1809 #playlist_editor_display_mode = classic
1810 #
1811 #discard_colors_if_item_is_selected = yes
1812 #
1813 #incremental_seeking = yes
1814 #
1815 #seek_time = 1
1816 #
1817 #volume_change_step = 2
1818 #
1819 #autocenter_mode = no
1820 #
1821 #centered_cursor = no
1822 #
1823 ##
1824 ## Note: You can specify third character which will
1825 ## be used to build 'empty' part of progressbar.
1826 ##
1827 #progressbar_look = =>
1828 progressbar_look = "─╼╶"
1829 #progressbar_look = "─⊙╶"
1830 #
1831 #progressbar_boldness = yes
1832 #
1833 ## Available values: database, playlist.
1834 ##
1835 #default_place_to_search_in = database
1836 #
1837 ## Available values: classic, alternative.
1838 ##
1839 #user_interface = classic
1840 #
1841 #data_fetching_delay = yes
1842 #
1843 ## Available values: artist, album_artist, date, genre, composer, performer.
1844 ##
1845 #media_library_primary_tag = artist
1846 #
1847 ## Available values: wrapped, normal.
1848 ##
1849 #default_find_mode = wrapped
1850 #
1851 #default_tag_editor_pattern = %n - %t
1852 #
1853 #header_visibility = yes
1854 #
1855 #statusbar_visibility = yes
1856 #
1857 #titles_visibility = yes
1858 #
1859 #header_text_scrolling = yes
1860 #
1861 #cyclic_scrolling = no
1862 #
1863 #lines_scrolled = 2
1864 #
1865 #follow_now_playing_lyrics = no
1866 #
1867 #fetch_lyrics_for_current_song_in_background = no
1868 #
1869 #store_lyrics_in_song_dir = no
1870 #
1871 #generate_win32_compatible_filenames = yes
1872 #
1873 #allow_for_physical_item_deletion = no
1874 #
1875 ##
1876 ## Note: If you set this variable, ncmpcpp will try to
1877 ## get info from last.fm in language you set and if it
1878 ## fails, it will fall back to english. Otherwise it will
1879 ## use english the first time.
1880 ##
1881 ## Note: Language has to be expressed as an ISO 639 alpha-2 code.
1882 ##
1883 #lastfm_preferred_language = en
1884 #
1885 #show_hidden_files_in_local_browser = no
1886 #
1887 ##
1888 ## How shall screen switcher work?
1889 ##
1890 ## - "previous" - switch between the current and previous screen.
1891 ## - "screen1,...,screenN" - switch between given sequence of screens.
1892 ##
1893 ## Screens available for use: help, playlist, browser, search_engine,
1894 ## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
1895 ##
1896 #screen_switcher_mode = playlist, browser
1897 #
1898 ##
1899 ## Note: You can define startup screen
1900 ## by choosing screen from the list above.
1901 ##
1902 #startup_screen = playlist
1903 #
1904 ##
1905 ## Note: You can define startup slave screen
1906 ## by choosing screen from the list above or
1907 ## an empty value for no slave screen.
1908 ##
1909 #startup_slave_screen = ""
1910 #
1911 #startup_slave_screen_focus = no
1912 #
1913 ##
1914 ## Default width of locked screen (in %).
1915 ## Acceptable values are from 20 to 80.
1916 ##
1917 #
1918 #locked_screen_width_part = 50
1919 #
1920 #ask_for_locked_screen_width_part = yes
1921 #
1922 #jump_to_now_playing_song_at_start = yes
1923 #
1924 #ask_before_clearing_playlists = yes
1925 #
1926 #clock_display_seconds = no
1927 #
1928 #display_volume_level = yes
1929 #
1930 #display_bitrate = no
1931 #
1932 #display_remaining_time = no
1933 #
1934 ## Available values: none, basic, extended, perl.
1935 ##
1936 #regular_expressions = perl
1937 #
1938 ##
1939 ## Note: If below is enabled, ncmpcpp will ignore leading
1940 ## "The" word while sorting items in browser, tags in
1941 ## media library, etc.
1942 ##
1943 #ignore_leading_the = no
1944 #
1945 #block_search_constraints_change_if_items_found = yes
1946 #
1947 #mouse_support = yes
1948 #
1949 #mouse_list_scroll_whole_page = yes
1950 #
1951 #empty_tag_marker = <empty>
1952 #
1953 #tags_separator = " | "
1954 #
1955 #tag_editor_extended_numeration = no
1956 #
1957 #media_library_sort_by_mtime = no
1958 #
1959 #enable_window_title = yes
1960 #
1961 ##
1962 ## Note: You can choose default search mode for search
1963 ## engine. Available modes are:
1964 ##
1965 ## - 1 - use mpd built-in searching (no regexes, pattern matching)
1966 ## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
1967 ## but if your mpd is on a remote machine, downloading big database
1968 ## to process it can take a while
1969 ## - 3 - match only exact values (this mode uses mpd function for searching
1970 ## in database and local one for searching in current playlist)
1971 ##
1972 #
1973 #search_engine_default_search_mode = 1
1974 #
1975 #external_editor = nano
1976 #
1977 ## Note: set to yes if external editor is a console application.
1978 ##
1979 #use_console_editor = yes
1980 #
1981 ##### colors definitions #####
1982 ##
1983 ## It is possible to set a background color by setting a color
1984 ## value "<foreground>_<background>", e.g. red_black will set
1985 ## foregound color to red and background color to black.
1986 ##
1987 ## In addition, for terminals that support 256 colors it
1988 ## is possible to set one of them by using a number in range
1989 ## [1, 256] instead of color name, e.g. numerical value
1990 ## corresponding to red_black is 2_1. To find out if the
1991 ## terminal supports 256 colors, run ncmpcpp and check out
1992 ## the bottom of the help screen for list of available colors
1993 ## and their numerical values.
1994 ##
1995 ## Note: due to technical limitations of ncurses, if 256 colors
1996 ## are used, it is possible to either use only the colors with
1997 ## default background color, or all pairs from 1_1 up to 254_127,
1998 ## depending on the ncurses version used.
1999 ##
2000 #
2001 #colors_enabled = yes
2002 #
2003 #empty_tag_color = cyan
2004 #
2005 #header_window_color = default
2006 #
2007 #volume_color = default
2008 #
2009 #state_line_color = default
2010 #
2011 #state_flags_color = default
2012 #
2013 #main_window_color = yellow
2014 #
2015 #color1 = white
2016 #
2017 #color2 = green
2018 #
2019 #main_window_highlight_color = yellow
2020 #
2021 #progressbar_color = black
2022 #
2023 #progressbar_elapsed_color = green
2024 #
2025 #statusbar_color = default
2026 #
2027 #alternative_ui_separator_color = black
2028 #
2029 #active_column_color = red
2030 #
2031 #window_border_color = green
2032 #
2033 #active_window_border = red
2034 #
2035 #+end_src
2036
2037 *** bindings
2038 :PROPERTIES:
2039 :header-args+: :tangle ~/.ncmpcpp/bindings
2040 :END:
2041
2042 #+begin_src conf :tangle no
2043 def_key "j"
2044 scroll_down
2045 def_key "k"
2046 scroll_up
2047
2048 def_key "ctrl-u"
2049 page_up
2050 def_key "ctrl-d"
2051 page_down
2052
2053 def_key "h"
2054 previous_column
2055 def_key "l"
2056 next_column
2057
2058 def_key "."
2059 show_lyrics
2060
2061 def_key "n"
2062 next_found_item
2063 def_key "N"
2064 previous_found_item
2065
2066 def_key "J"
2067 move_sort_order_down
2068 def_key "K"
2069 move_sort_order_up
2070 #+end_src
2071
2072 ** notmuch
2073
2074 *** notmuch-config
2075 :PROPERTIES:
2076 :header-args+: :tangle ~/.notmuch-config
2077 :END:
2078
2079 #+begin_src conf
2080 # .notmuch-config - Configuration file for the notmuch mail system
2081 #
2082 # For more information about notmuch, see https://notmuchmail.org
2083
2084 # Database configuration
2085 #
2086 # The only value supported here is 'path' which should be the top-level
2087 # directory where your mail currently exists and to where mail will be
2088 # delivered in the future. Files should be individual email messages.
2089 # Notmuch will store its database within a sub-directory of the path
2090 # configured here named ".notmuch".
2091 #
2092 [database]
2093 path=/home/amin/mail
2094
2095 # User configuration
2096 #
2097 # Here is where you can let notmuch know how you would like to be
2098 # addressed. Valid settings are
2099 #
2100 # name Your full name.
2101 # primary_email Your primary email address.
2102 # other_email A list (separated by ';') of other email addresses
2103 # at which you receive email.
2104 #
2105 # Notmuch will use the various email addresses configured here when
2106 # formatting replies. It will avoid including your own addresses in the
2107 # recipient list of replies, and will set the From address based on the
2108 # address to which the original email was addressed.
2109 #
2110 [user]
2111 name=Amin Bandali
2112 primary_email=amin@aminb.org
2113 other_email=abandali@uwaterloo.ca;mab@gnu.org;aminb@gnu.org;
2114
2115 # Configuration for "notmuch new"
2116 #
2117 # The following options are supported here:
2118 #
2119 # tags A list (separated by ';') of the tags that will be
2120 # added to all messages incorporated by "notmuch new".
2121 #
2122 # ignore A list (separated by ';') of file and directory names
2123 # that will not be searched for messages by "notmuch new".
2124 #
2125 # NOTE: *Every* file/directory that goes by one of those
2126 # names will be ignored, independent of its depth/location
2127 # in the mail store.
2128 #
2129 [new]
2130 tags=new;
2131 #tags=unread;inbox;
2132 ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
2133
2134 # Search configuration
2135 #
2136 # The following option is supported here:
2137 #
2138 # exclude_tags
2139 # A ;-separated list of tags that will be excluded from
2140 # search results by default. Using an excluded tag in a
2141 # query will override that exclusion.
2142 #
2143 [search]
2144 exclude_tags=deleted;spam;
2145
2146 # Maildir compatibility configuration
2147 #
2148 # The following option is supported here:
2149 #
2150 # synchronize_flags Valid values are true and false.
2151 #
2152 # If true, then the following maildir flags (in message filenames)
2153 # will be synchronized with the corresponding notmuch tags:
2154 #
2155 # Flag Tag
2156 # ---- -------
2157 # D draft
2158 # F flagged
2159 # P passed
2160 # R replied
2161 # S unread (added when 'S' flag is not present)
2162 #
2163 # The "notmuch new" command will notice flag changes in filenames
2164 # and update tags, while the "notmuch tag" and "notmuch restore"
2165 # commands will notice tag changes and update flags in filenames
2166 #
2167 [maildir]
2168 synchronize_flags=true
2169
2170 # Cryptography related configuration
2171 #
2172 # The following option is supported here:
2173 #
2174 # gpg_path
2175 # binary name or full path to invoke gpg.
2176 #
2177 [crypto]
2178 gpg_path=gpg
2179 #+end_src
2180
2181 *** pre-new hook
2182 :PROPERTIES:
2183 :header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
2184 :END:
2185
2186 #+begin_src sh
2187 touch /tmp/gnusieve.log
2188 sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
2189 -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
2190 #+end_src
2191
2192 *** post-new hook
2193 :PROPERTIES:
2194 :header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
2195 :END:
2196
2197 #+begin_src sh
2198 # apply sent tag to messages sent by me
2199 notmuch tag -new +sent -- from:amin@aminb.org or from:mab@gnu.org or from:aminb@gnu.org or from:abandali@uwaterloo.ca
2200
2201 # initial tagging
2202 notmuch tag -latest -- tag:latest
2203 notmuch tag +inbox +unread +latest -new -- tag:new
2204
2205
2206 # apply tags to lists
2207
2208 # <aminb>
2209 notmuch tag -inbox +lists/~sircmpwn/srht-admins -- folder:amin/lists/~sircmpwn/srht-admins
2210 notmuch tag -inbox +lists/~sircmpwn/srht-announce -- folder:amin/lists/~sircmpwn/srht-announce
2211 notmuch tag -inbox +lists/~sircmpwn/srht-dev -- folder:amin/lists/~sircmpwn/srht-dev
2212 notmuch tag -inbox +lists/~sircmpwn/srht-discuss -- folder:amin/lists/~sircmpwn/srht-discuss
2213
2214 notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
2215 notmuch tag -inbox +lists/haskell-weekly -- folder:amin/lists/haskell-weekly
2216
2217 notmuch tag -inbox +pay -- folder:amin/pay
2218 # </aminb>
2219
2220 # <uw>
2221 notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
2222 notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
2223
2224 notmuch tag -inbox +lists/clvsingle -- folder:uwaterloo/lists/Clvsingle
2225 notmuch tag -inbox +lists/gsa -- folder:uwaterloo/lists/GSA
2226 notmuch tag -inbox +lists/math-grad -- folder:uwaterloo/lists/Math-grad
2227 notmuch tag -inbox +lists/scs-grads -- folder:uwaterloo/lists/scs-grads
2228 notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
2229 # </uw>
2230
2231 # <gnu>
2232 notmuch tag -inbox +lists/emacs-devel -- folder:gnu/l/emacs-devel
2233 notmuch tag -inbox +lists/emacs-orgmode -- folder:gnu/l/emacs-orgmode
2234 notmuch tag -inbox +lists/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
2235 notmuch tag -inbox +lists/fencepost-users -- folder:gnu/l/fencepost-users
2236 notmuch tag -inbox +lists/guix-devel -- folder:gnu/l/guix-devel
2237 notmuch tag -inbox +lists/guile-devel -- folder:gnu/l/guile-devel
2238 notmuch tag -inbox +lists/help-gnu-emacs -- folder:gnu/l/help-gnu-emacs
2239 notmuch tag -inbox +lists/info-gnu-emacs -- folder:gnu/l/info-gnu-emacs
2240 notmuch tag -inbox +lists/www-commits -- folder:gnu/l/www-commits
2241 notmuch tag -inbox +lists/www-discuss -- folder:gnu/l/www-discuss
2242 notmuch tag -inbox +webmasters -- folder:gnu/webmasters
2243
2244 notmuch tag -inbox +lists/deepspec -- folder:gnu/l/deepspec
2245 notmuch tag -inbox +lists/haskell-cafe -- folder:gnu/l/haskell-cafe
2246 notmuch tag -inbox +lists/haskell-art -- folder:gnu/l/haskell-art
2247 notmuch tag -inbox +lists/notmuch -- folder:gnu/l/notmuch
2248 # </gnu>
2249
2250 notmuch tag -inbox -unread +archive/notmuch -- path:archive/notmuch/**
2251 notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**
2252 #+end_src
2253
2254 *** notmuch.service
2255 :PROPERTIES:
2256 :header-args+: :tangle ~/.config/systemd/user/notmuch.service
2257 :END:
2258
2259 #+begin_src conf :tangle no
2260 [Unit]
2261 Description=notmuch service
2262
2263 [Service]
2264 Type=oneshot
2265 ExecStart=/usr/bin/notmuch new
2266 StandardOutput=syslog
2267 StandardError=syslog
2268 #+end_src
2269
2270 *** notmuch.timer
2271 :PROPERTIES:
2272 :header-args+: :tangle ~/.config/systemd/user/notmuch.timer
2273 :END:
2274
2275 #+begin_src conf :tangle no
2276 [Unit]
2277 Description=notmuch timer
2278
2279 [Timer]
2280 OnCalendar=*:0/5
2281 Persistent=true
2282 Unit=notmuch.service
2283
2284 [Install]
2285 WantedBy=timers.target
2286 #+end_src
2287
2288 ** offlineimap
2289
2290 *** offlineimaprc
2291 :PROPERTIES:
2292 :header-args+: :tangle ~/.offlineimaprc
2293 :END:
2294
2295 #+begin_src conf :tangle no
2296 [general]
2297 pythonfile = ~/.offlineimap.py
2298 accounts = Gmail, aminb
2299 maxsyncaccounts = 3
2300
2301 [Account Gmail]
2302 localrepository = GmailL
2303 remoterepository = GmailR
2304
2305 [Account aminb]
2306 localrepository = aminbL
2307 remoterepository = aminbR
2308
2309 [Repository GmailL]
2310 type = Maildir
2311 localfolders = ~/Maildir/Gmail
2312
2313 [Repository GmailR]
2314 type = IMAP
2315 remotehost = imap.gmail.com
2316 remoteusereval = mailuser("gmail")
2317 remotepasseval = mailpasswd("gmail")
2318 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2319 ssl = yes
2320 folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
2321 maxconnections = 1
2322 realdelete = no
2323
2324 [Repository aminbL]
2325 type = Maildir
2326 localfolders = ~/Maildir/aminb
2327
2328 [Repository aminbR]
2329 type = IMAP
2330 remotehost = mail.aminb.org
2331 remoteusereval = mailuser("aminb")
2332 remotepasseval = mailpasswd("aminb")
2333 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2334 ssl = yes
2335 folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
2336 maxconnections = 1
2337 realdelete = no
2338 #+end_src
2339
2340 *** offlineimap.py
2341 :PROPERTIES:
2342 :header-args+: :tangle ~/.offlineimap.py
2343 :END:
2344
2345 #+begin_src python :tangle no
2346 import os
2347 import subprocess
2348
2349 def mailpasswd(acct):
2350 acct = os.path.basename(acct)
2351 path = "/home/amin/.passwd/%s.gpg" % acct
2352 args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
2353 try:
2354 return subprocess.check_output(args).strip()
2355 except subprocess.CalledProcessError:
2356 return ""
2357
2358 def mailuser(acct):
2359 acct = os.path.basename(acct)
2360 path = "/home/amin/.passwd/%s" % acct
2361 args = ["cat", path]
2362 try:
2363 return subprocess.check_output(args).strip()
2364 except subprocess.CalledProcessError:
2365 return ""
2366
2367 def prime_gpg_agent():
2368 ret = False
2369 i = 1
2370 while not ret:
2371 ret = (mailpasswd("prime") == "prime")
2372 if i > 2:
2373 from offlineimap.ui import getglobalui
2374 sys.stderr.write("Error reading in passwords. Terminating.\n")
2375 getglobalui().terminate()
2376 i += 1
2377 return ret
2378
2379 prime_gpg_agent()
2380 #+end_src
2381
2382 ** pigeonhole
2383 *** gnu.sieve
2384 :PROPERTIES:
2385 :header-args+: :tangle ~/sieve/gnu.sieve :comments none
2386 :END:
2387
2388 #+begin_src conf
2389 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags", "include" ];
2390
2391 if anyof (
2392 address :is "from" "webmasters@gnu.org",
2393 address :is "from" "webmasters-comment@gnu.org") {
2394 fileinto :create "webmasters";
2395 stop;
2396 }
2397
2398 include :personal "lists";
2399 #+end_src
2400
2401 *** lists.sieve
2402 :PROPERTIES:
2403 :header-args+: :tangle ~/sieve/lists.sieve :comments none
2404 :END:
2405
2406 #+begin_src conf
2407 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags",
2408 "include" ];
2409
2410 if anyof (
2411 header :contains "list-id" "<emacs-devel.gnu.org>",
2412 header :contains "list-id" "<emacs-orgmode.gnu.org>",
2413 header :contains "list-id" "<emacsconf-discuss.gnu.org>",
2414 header :contains "list-id" "<fencepost-users.gnu.org>",
2415 header :contains "list-id" "<guix-devel.gnu.org>",
2416 header :contains "list-id" "<guile-devel.gnu.org>",
2417 header :contains "list-id" "<help-gnu-emacs.gnu.org>",
2418 header :contains "list-id" "<info-gnu-emacs.gnu.org>",
2419 header :contains "list-id" "<www-commits.gnu.org>",
2420 header :contains "list-id" "<www-discuss.gnu.org>",
2421 header :contains "list-id" "<deepspec.lists.cs.princeton.edu>",
2422 header :contains "list-id" "<haskell-cafe.haskell.org>",
2423 header :contains "list-id" "<haskell-art.we.lurk.org>",
2424 header :contains "list-id" "<notmuch.notmuchmail.org>") {
2425 if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
2426 set :lower "listname" "${1}";
2427 fileinto :create "l/${listname}";
2428 }
2429 }
2430 #+end_src
2431
2432 ** polybar
2433
2434 *** config
2435 :PROPERTIES:
2436 :header-args+: :tangle ~/.config/polybar/config
2437 :END:
2438
2439 #+begin_src conf :tangle no
2440 ;=====================================================
2441 ;
2442 ; To learn more about how to configure Polybar
2443 ; go to https://github.com/jaagr/polybar
2444 ;
2445 ; The README contains alot of information
2446 ;
2447 ;=====================================================
2448
2449 [colors]
2450 ;background = ${xrdb:color0:#222}
2451 background = #222
2452 background-alt = #444
2453 ;foreground = ${xrdb:color7:#222}
2454 foreground = #eee
2455 foreground-alt = #888
2456 primary = #ffb52a
2457 secondary = #e60053
2458 alert = #bd2c40
2459
2460 [bar/main]
2461 ;monitor = ${env:MONITOR:HDMI-1}
2462 width = 100%
2463 height = 27
2464 ;offset-x = 1%
2465 ;offset-y = 1%
2466 radius = 3.0
2467 fixed-center = true
2468
2469 background = ${colors.background}
2470 foreground = ${colors.foreground}
2471
2472 line-size = 3
2473 line-color = #f00
2474
2475 border-size = 4
2476 border-color = #00000000
2477
2478 padding-left = 0
2479 padding-right = 2
2480
2481 module-margin-left = 2
2482 module-margin-right = 2
2483
2484 font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
2485 font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
2486 font-2 = Wuncon Siji:pixelsize=10;1
2487 font-3 = FontAwesome:pixelsize=10;1
2488
2489 modules-left = bspwm xwindow
2490 modules-center =
2491 modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
2492
2493 tray-position = right
2494 tray-padding = 1
2495 ;tray-transparent = true
2496 ;tray-background = #0063ff
2497 tray-maxsize = 18
2498
2499 wm-restack = bspwm
2500
2501 ;override-redirect = true
2502
2503 scroll-up = bspwm-desknext
2504 scroll-down = bspwm-deskprev
2505
2506 [module/xwindow]
2507 type = internal/xwindow
2508 label = %title:0:50:...%
2509
2510 [module/xkeyboard]
2511 type = internal/xkeyboard
2512 blacklist-0 = num lock
2513
2514 format-prefix = " "
2515 format-prefix-foreground = ${colors.foreground-alt}
2516 format-prefix-underline = ${colors.secondary}
2517
2518 label-layout = %layout%
2519 label-layout-underline = ${colors.secondary}
2520
2521 label-indicator-padding = 2
2522 label-indicator-margin = 1
2523 label-indicator-background = ${colors.secondary}
2524 label-indicator-underline = ${colors.secondary}
2525
2526 [module/filesystem]
2527 type = internal/fs
2528 interval = 25
2529
2530 mount-0 = /
2531
2532 label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
2533 label-unmounted = %mountpoint% not mounted
2534 label-unmounted-foreground = ${colors.foreground-alt}
2535
2536 [module/bspwm]
2537 type = internal/bspwm
2538
2539 label-focused = %index%
2540 label-focused-background = ${colors.background-alt}
2541 label-focused-underline= ${colors.primary}
2542 label-focused-padding = 2
2543
2544 label-occupied = %index%
2545 label-occupied-padding = 2
2546
2547 label-urgent = %index%!
2548 label-urgent-background = ${colors.alert}
2549 label-urgent-padding = 2
2550
2551 label-empty = %index%
2552 label-empty-foreground = ${colors.foreground-alt}
2553 label-empty-padding = 2
2554
2555 [module/i3]
2556 type = internal/i3
2557 format = <label-state> <label-mode>
2558 index-sort = true
2559 wrapping-scroll = false
2560
2561 ; Only show workspaces on the same output as the bar
2562 ;pin-workspaces = true
2563
2564 label-mode-padding = 2
2565 label-mode-foreground = #000
2566 label-mode-background = ${colors.primary}
2567
2568 ; focused = Active workspace on focused monitor
2569 label-focused = %index%
2570 label-focused-background = ${module/bspwm.label-focused-background}
2571 label-focused-underline = ${module/bspwm.label-focused-underline}
2572 label-focused-padding = ${module/bspwm.label-focused-padding}
2573
2574 ; unfocused = Inactive workspace on any monitor
2575 label-unfocused = %index%
2576 label-unfocused-padding = ${module/bspwm.label-occupied-padding}
2577
2578 ; visible = Active workspace on unfocused monitor
2579 label-visible = %index%
2580 label-visible-background = ${self.label-focused-background}
2581 label-visible-underline = ${self.label-focused-underline}
2582 label-visible-padding = ${self.label-focused-padding}
2583
2584 ; urgent = Workspace with urgency hint set
2585 label-urgent = %index%
2586 label-urgent-background = ${module/bspwm.label-urgent-background}
2587 label-urgent-padding = ${module/bspwm.label-urgent-padding}
2588
2589 [module/mpd]
2590 type = internal/mpd
2591 format-online = <label-song> <icon-prev> <icon-stop> <toggle> <icon-next>
2592
2593 icon-prev = 
2594 icon-stop = 
2595 icon-play = 
2596 icon-pause = 
2597 icon-next = 
2598
2599 label-song-maxlen = 25
2600 label-song-ellipsis = true
2601
2602 [module/xbacklight]
2603 type = internal/xbacklight
2604
2605 format = <label> <bar>
2606 label = BL
2607
2608 bar-width = 10
2609 bar-indicator = |
2610 bar-indicator-foreground = #ff
2611 bar-indicator-font = 2
2612 bar-fill = ─
2613 bar-fill-font = 2
2614 bar-fill-foreground = #9f78e1
2615 bar-empty = ─
2616 bar-empty-font = 2
2617 bar-empty-foreground = ${colors.foreground-alt}
2618
2619 [module/backlight-acpi]
2620 inherit = module/xbacklight
2621 type = internal/backlight
2622 ;card = intel_backlight
2623 card = mba6x_backlight
2624
2625 [module/cpu]
2626 type = internal/cpu
2627 interval = 2
2628 format-prefix = " "
2629 format-prefix-foreground = ${colors.foreground-alt}
2630 format-underline = #f90000
2631 label = %percentage%%
2632
2633 [module/memory]
2634 type = internal/memory
2635 interval = 2
2636 format-prefix = " "
2637 format-prefix-foreground = ${colors.foreground-alt}
2638 format-underline = #4bffdc
2639 label = %percentage_used%%
2640
2641 [module/wlan]
2642 type = internal/network
2643 interface =
2644 interval = 3.0
2645
2646 format-connected = <ramp-signal> <label-connected>
2647 format-connected-underline = #9f78e1
2648 label-connected = %essid%
2649
2650 format-disconnected =
2651 ;format-disconnected = <label-disconnected>
2652 ;format-disconnected-underline = ${self.format-connected-underline}
2653 ;label-disconnected = %ifname% disconnected
2654 ;label-disconnected-foreground = ${colors.foreground-alt}
2655
2656 ramp-signal-0 = 
2657 ramp-signal-1 = 
2658 ramp-signal-2 = 
2659 ramp-signal-3 = 
2660 ramp-signal-4 = 
2661 ramp-signal-foreground = ${colors.foreground-alt}
2662
2663 [module/eth]
2664 type = internal/network
2665 interface =
2666 interval = 3.0
2667
2668 format-connected-underline = #55aa55
2669 format-connected-prefix = " "
2670 format-connected-prefix-foreground = ${colors.foreground-alt}
2671 label-connected = %local_ip%
2672
2673 format-disconnected =
2674 ;format-disconnected = <label-disconnected>
2675 ;format-disconnected-underline = ${self.format-connected-underline}
2676 ;label-disconnected = %ifname% disconnected
2677 ;label-disconnected-foreground = ${colors.foreground-alt}
2678
2679 [module/date]
2680 type = internal/date
2681 interval = 5
2682
2683 date =
2684 date-alt = " %Y-%m-%d"
2685
2686 time = %H:%M
2687 time-alt = %H:%M:%S
2688
2689 format-prefix = 
2690 format-prefix-foreground = ${colors.foreground-alt}
2691 format-underline = #0a6cf5
2692
2693 label = %date% %time%
2694
2695 [module/volume]
2696 type = internal/volume
2697
2698 format-volume = <label-volume> <bar-volume>
2699 label-volume = vol
2700 label-volume-foreground = ${root.foreground}
2701
2702 format-muted-prefix = " "
2703 format-muted-foreground = ${colors.foreground-alt}
2704 label-muted = mute
2705
2706 bar-volume-width = 10
2707 bar-volume-foreground-0 = #55aa55
2708 bar-volume-foreground-1 = #55aa55
2709 bar-volume-foreground-2 = #55aa55
2710 bar-volume-foreground-3 = #55aa55
2711 bar-volume-foreground-4 = #55aa55
2712 bar-volume-foreground-5 = #f5a70a
2713 bar-volume-foreground-6 = #ff5555
2714 bar-volume-gradient = false
2715 bar-volume-indicator = |
2716 bar-volume-indicator-font = 2
2717 bar-volume-fill = ─
2718 bar-volume-fill-font = 2
2719 bar-volume-empty = ─
2720 bar-volume-empty-font = 2
2721 bar-volume-empty-foreground = ${colors.foreground-alt}
2722
2723 [module/battery]
2724 type = internal/battery
2725 battery = BAT0
2726 adapter = ADP1
2727 full-at = 64
2728
2729 format-charging = <animation-charging> <label-charging>
2730 format-charging-underline = #ffb52a
2731
2732 format-discharging = <ramp-capacity> <label-discharging>
2733 format-discharging-underline = ${self.format-charging-underline}
2734
2735 format-full-prefix = " "
2736 format-full-prefix-foreground = ${colors.foreground-alt}
2737 format-full-underline = ${self.format-charging-underline}
2738
2739 ramp-capacity-0 = 
2740 ramp-capacity-1 = 
2741 ramp-capacity-2 = 
2742 ramp-capacity-foreground = ${colors.foreground-alt}
2743
2744 animation-charging-0 = 
2745 animation-charging-1 = 
2746 animation-charging-2 = 
2747 animation-charging-foreground = ${colors.foreground-alt}
2748 animation-charging-framerate = 750
2749
2750 [module/temperature]
2751 type = internal/temperature
2752 thermal-zone = 1
2753 warn-temperature = 66
2754
2755 format = <ramp> <label>
2756 format-underline = #f50a4d
2757 format-warn = <ramp> <label-warn>
2758 format-warn-underline = ${self.format-underline}
2759
2760 label = %temperature%
2761 label-warn = %temperature%
2762 label-warn-foreground = ${colors.secondary}
2763
2764 ramp-0 = 
2765 ramp-1 = 
2766 ramp-2 = 
2767 ramp-foreground = ${colors.foreground-alt}
2768
2769 [module/powermenu]
2770 type = custom/menu
2771
2772 format-spacing = 1
2773
2774 label-open = 
2775 label-open-foreground = ${colors.secondary}
2776 label-close =  cancel
2777 label-close-foreground = ${colors.secondary}
2778 label-separator = |
2779 label-separator-foreground = ${colors.foreground-alt}
2780
2781 menu-0-0 = reboot
2782 menu-0-0-exec = menu-open-1
2783 menu-0-1 = power off
2784 menu-0-1-exec = menu-open-2
2785
2786 menu-1-0 = cancel
2787 menu-1-0-exec = menu-open-0
2788 menu-1-1 = reboot
2789 menu-1-1-exec = sudo reboot
2790
2791 menu-2-0 = power off
2792 menu-2-0-exec = sudo poweroff
2793 menu-2-1 = cancel
2794 menu-2-1-exec = menu-open-0
2795
2796 [module/mail]
2797 type = custom/script
2798 interval = 60
2799 format = <label>
2800 format-prefix = " "
2801 format-prefix-foreground = ${colors.foreground-alt}
2802 format-underline = #0a6cf5
2803 exec = notmuch count tag:unread
2804
2805 [settings]
2806 screenchange-reload = true
2807 ;compositing-background = xor
2808 ;compositing-background = screen
2809 ;compositing-foreground = source
2810 ;compositing-border = over
2811
2812 [global/wm]
2813 margin-top = 0
2814 margin-bottom = 0
2815
2816 ; vim:ft=dosini
2817 #+end_src
2818
2819 *** polybar-launch
2820 :PROPERTIES:
2821 :header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
2822 :END:
2823
2824 #+begin_src sh :tangle no
2825 # Terminate already running bar instances
2826 killall -q polybar
2827
2828 # Wait until the processes have been shut down
2829 while pgrep -x polybar >/dev/null; do sleep 1; done
2830
2831 # Launch main bar
2832 polybar main &
2833
2834 echo "Bars launched..."
2835 #+end_src
2836
2837 ** PowerTOP
2838 :PROPERTIES:
2839 :header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
2840 :END:
2841
2842 #+begin_src conf
2843 [Unit]
2844 Description=Powertop tunings
2845
2846 [Service]
2847 ExecStart=/usr/bin/powertop --auto-tune
2848 RemainAfterExit=true
2849
2850 [Install]
2851 WantedBy=multi-user.target
2852 #+end_src
2853
2854 ** ranger
2855
2856 *** rc.conf
2857 :PROPERTIES:
2858 :header-args+: :tangle ~/.config/ranger/rc.conf
2859 :END:
2860
2861 #+begin_src conf :tangle no
2862 # ===================================================================
2863 # This file contains the default startup commands for ranger.
2864 # To change them, it is recommended to create the file
2865 # ~/.config/ranger/rc.conf and add your custom commands there.
2866 #
2867 # If you copy this whole file there, you may want to set the environment
2868 # variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
2869 #
2870 # The purpose of this file is mainly to define keybindings and settings.
2871 # For running more complex python code, please create a plugin in "plugins/" or
2872 # a command in "commands.py".
2873 #
2874 # Each line is a command that will be run before the user interface
2875 # is initialized. As a result, you can not use commands which rely
2876 # on the UI such as :delete or :mark.
2877 # ===================================================================
2878
2879 # ===================================================================
2880 # == Options
2881 # ===================================================================
2882
2883 # How many columns are there, and what are their relative widths?
2884 set column_ratios 1,3,4
2885
2886 # Which files should be hidden? (regular expression)
2887 set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
2888
2889 # Show hidden files? You can toggle this by typing 'zh'
2890 set show_hidden false
2891
2892 # Ask for a confirmation when running the "delete" command?
2893 # Valid values are "always" (default), "never", "multiple"
2894 # With "multiple", ranger will ask only if you delete multiple files at once.
2895 set confirm_on_delete multiple
2896
2897 # Which script is used to generate file previews?
2898 # ranger ships with scope.sh, a script that calls external programs (see
2899 # README for dependencies) to preview images, archives, etc.
2900 set preview_script ~/.config/ranger/scope.sh
2901
2902 # Use the external preview script or display simple plain text previews?
2903 set use_preview_script true
2904
2905 # Open all images in this directory when running certain image viewers
2906 # like feh or sxiv? You can still open selected files by marking them.
2907 set open_all_images true
2908
2909 # Be aware of version control systems and display information.
2910 set vcs_aware false
2911
2912 # State of the three backends git, hg, bzr. The possible states are
2913 # disabled, local (only show local info), enabled (show local and remote
2914 # information).
2915 set vcs_backend_git enabled
2916 set vcs_backend_hg disabled
2917 set vcs_backend_bzr disabled
2918
2919 # Preview images in full color with the external command "w3mimgpreview"?
2920 # This requires the console web browser "w3m" and a supported terminal.
2921 # It has been successfully tested with "xterm" and "urxvt" without tmux.
2922 set preview_images true
2923
2924 # Use a unicode "..." character to mark cut-off filenames?
2925 set unicode_ellipsis false
2926
2927 # Show dotfiles in the bookmark preview box?
2928 set show_hidden_bookmarks true
2929
2930 # Which colorscheme to use? These colorschemes are available by default:
2931 # default, jungle, snow
2932 set colorscheme default
2933
2934 # Preview files on the rightmost column?
2935 # And collapse (shrink) the last column if there is nothing to preview?
2936 set preview_files true
2937 set preview_directories true
2938 set collapse_preview true
2939
2940 # Save the console history on exit?
2941 set save_console_history true
2942
2943 # Draw the status bar on top of the browser window (default: bottom)
2944 set status_bar_on_top false
2945
2946 # Draw a progress bar in the status bar which displays the average state of all
2947 # currently running tasks which support progress bars?
2948 set draw_progress_bar_in_status_bar true
2949
2950 # Draw borders around columns?
2951 set draw_borders true
2952
2953 # Display the directory name in tabs?
2954 set dirname_in_tabs false
2955
2956 # Enable the mouse support?
2957 set mouse_enabled true
2958
2959 # Display the file size in the main column or status bar?
2960 set display_size_in_main_column true
2961 set display_size_in_status_bar true
2962
2963 # Display files tags in all columns or only in main column?
2964 set display_tags_in_all_columns true
2965
2966 # Set a title for the window?
2967 set update_title false
2968
2969 # Set the title to "ranger" in the tmux program?
2970 set update_tmux_title false
2971
2972 # Shorten the title if it gets long? The number defines how many
2973 # directories are displayed at once, 0 turns off this feature.
2974 set shorten_title 3
2975
2976 # Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
2977 set tilde_in_titlebar false
2978
2979 # How many directory-changes or console-commands should be kept in history?
2980 set max_history_size 20
2981 set max_console_history_size 50
2982
2983 # Try to keep so much space between the top/bottom border when scrolling:
2984 set scroll_offset 8
2985
2986 # Flush the input after each key hit? (Noticable when ranger lags)
2987 set flushinput true
2988
2989 # Padding on the right when there's no preview?
2990 # This allows you to click into the space to run the file.
2991 set padding_right true
2992
2993 # Save bookmarks (used with mX and `X) instantly?
2994 # This helps to synchronize bookmarks between multiple ranger
2995 # instances but leads to *slight* performance loss.
2996 # When false, bookmarks are saved when ranger is exited.
2997 set autosave_bookmarks true
2998
2999 # You can display the "real" cumulative size of directories by using the
3000 # command :get_cumulative_size or typing "dc". The size is expensive to
3001 # calculate and will not be updated automatically. You can choose
3002 # to update it automatically though by turning on this option:
3003 set autoupdate_cumulative_size false
3004
3005 # Turning this on makes sense for screen readers:
3006 set show_cursor false
3007
3008 # One of: size, basename, mtime, type
3009 set sort natural
3010
3011 # Additional sorting options
3012 set sort_reverse false
3013 set sort_case_insensitive true
3014 set sort_directories_first true
3015
3016 # Enable this if key combinations with the Alt Key don't work for you.
3017 # (Especially on xterm)
3018 set xterm_alt_key false
3019
3020 # ===================================================================
3021 # == Local Options
3022 # ===================================================================
3023 # You can set local options that only affect a single directory.
3024
3025 # Examples:
3026 # setlocal path=~/downloads sort mtime
3027
3028 # ===================================================================
3029 # == Command Aliases in the Console
3030 # ===================================================================
3031
3032 alias e edit
3033 alias q quit
3034 alias q! quitall
3035 alias qall quitall
3036 alias setl setlocal
3037
3038 alias filter scout -prt
3039 alias find scout -aet
3040 alias mark scout -mr
3041 alias unmark scout -Mr
3042 alias search scout -rs
3043 alias search_inc scout -rts
3044 alias travel scout -aefiklst
3045
3046 # ===================================================================
3047 # == Define keys for the browser
3048 # ===================================================================
3049
3050 # Basic
3051 map Q quit!
3052 map q quit
3053 copymap q ZZ ZQ
3054
3055 map R reload_cwd
3056 map <C-r> reset
3057 map <C-l> redraw_window
3058 map <C-c> abort
3059 map <esc> change_mode normal
3060
3061 map i display_file
3062 map ? help
3063 map W display_log
3064 map w taskview_open
3065 map S shell $SHELL
3066
3067 map : console
3068 map ; console
3069 map ! console shell
3070 map @ console -p6 shell %%s
3071 map # console shell -p
3072 map s console shell
3073 map r chain draw_possible_programs; console open_with
3074 map f console find
3075 map cd console cd
3076
3077 # Tagging / Marking
3078 map t tag_toggle
3079 map ut tag_remove
3080 map "<any> tag_toggle tag=%any
3081 map <Space> mark_files toggle=True
3082 map v mark_files all=True toggle=True
3083 map uv mark_files all=True val=False
3084 map V toggle_visual_mode
3085 map uV toggle_visual_mode reverse=True
3086
3087 # For the nostalgics: Midnight Commander bindings
3088 map <F1> help
3089 map <F3> display_file
3090 map <F4> edit
3091 map <F5> copy
3092 map <F6> cut
3093 map <F7> console mkdir
3094 map <F8> console delete
3095 map <F10> exit
3096
3097 # In case you work on a keyboard with dvorak layout
3098 map <UP> move up=1
3099 map <DOWN> move down=1
3100 map <LEFT> move left=1
3101 map <RIGHT> move right=1
3102 map <HOME> move to=0
3103 map <END> move to=-1
3104 map <PAGEDOWN> move down=1 pages=True
3105 map <PAGEUP> move up=1 pages=True
3106 map <CR> move right=1
3107 map <DELETE> console delete
3108 map <INSERT> console touch
3109
3110 # VIM-like
3111 copymap <UP> k
3112 copymap <DOWN> j
3113 copymap <LEFT> h
3114 copymap <RIGHT> l
3115 copymap <HOME> gg
3116 copymap <END> G
3117 copymap <PAGEDOWN> <C-F>
3118 copymap <PAGEUP> <C-B>
3119
3120 map J move down=0.5 pages=True
3121 map K move up=0.5 pages=True
3122 copymap J <C-D>
3123 copymap K <C-U>
3124
3125 # Jumping around
3126 map H history_go -1
3127 map L history_go 1
3128 map ] move_parent 1
3129 map [ move_parent -1
3130 map } traverse
3131
3132 map gh cd ~
3133 map ge cd /etc
3134 map gu cd /usr
3135 map gd cd /dev
3136 map gl cd -r .
3137 map gL cd -r %f
3138 map go cd /opt
3139 map gv cd /var
3140 map gm cd /media
3141 map gM cd /mnt
3142 map gs cd /srv
3143 map gr cd /
3144 map gR eval fm.cd(ranger.RANGERDIR)
3145 map g/ cd /
3146 map g? cd /usr/share/doc/ranger
3147
3148 # External Programs
3149 map E edit
3150 map du shell -p du --max-depth=1 -h --apparent-size
3151 map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
3152 map yp shell -d echo -n %d/%f | xsel -i
3153 map yd shell -d echo -n %d | xsel -i
3154 map yn shell -d echo -n %f | xsel -i
3155
3156 # Filesystem Operations
3157 map = chmod
3158
3159 map cw console rename
3160 map A eval fm.open_console('rename ' + fm.thisfile.basename)
3161 map I eval fm.open_console('rename ' + fm.thisfile.basename, position=7)
3162
3163 map pp paste
3164 map po paste overwrite=True
3165 map pl paste_symlink relative=False
3166 map pL paste_symlink relative=True
3167 map phl paste_hardlink
3168 map pht paste_hardlinked_subtree
3169
3170 map dd cut
3171 map ud uncut
3172 map da cut mode=add
3173 map dr cut mode=remove
3174
3175 map yy copy
3176 map uy uncut
3177 map ya copy mode=add
3178 map yr copy mode=remove
3179
3180 # Temporary workarounds
3181 map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
3182 map dG eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
3183 map dj eval fm.cut(dirarg=dict(down=1), narg=quantifier)
3184 map dk eval fm.cut(dirarg=dict(up=1), narg=quantifier)
3185 map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
3186 map yG eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
3187 map yj eval fm.copy(dirarg=dict(down=1), narg=quantifier)
3188 map yk eval fm.copy(dirarg=dict(up=1), narg=quantifier)
3189
3190 # Searching
3191 map / console search
3192 map n search_next
3193 map N search_next forward=False
3194 map ct search_next order=tag
3195 map cs search_next order=size
3196 map ci search_next order=mimetype
3197 map cc search_next order=ctime
3198 map cm search_next order=mtime
3199 map ca search_next order=atime
3200
3201 # Tabs
3202 map <C-n> tab_new ~
3203 map <C-w> tab_close
3204 map <TAB> tab_move 1
3205 map <S-TAB> tab_move -1
3206 map <A-Right> tab_move 1
3207 map <A-Left> tab_move -1
3208 map gt tab_move 1
3209 map gT tab_move -1
3210 map gn tab_new ~
3211 map gc tab_close
3212 map uq tab_restore
3213 map <a-1> tab_open 1
3214 map <a-2> tab_open 2
3215 map <a-3> tab_open 3
3216 map <a-4> tab_open 4
3217 map <a-5> tab_open 5
3218 map <a-6> tab_open 6
3219 map <a-7> tab_open 7
3220 map <a-8> tab_open 8
3221 map <a-9> tab_open 9
3222
3223 # Sorting
3224 map or toggle_option sort_reverse
3225 map os chain set sort=size; set sort_reverse=False
3226 map ob chain set sort=basename; set sort_reverse=False
3227 map on chain set sort=natural; set sort_reverse=False
3228 map om chain set sort=mtime; set sort_reverse=False
3229 map oc chain set sort=ctime; set sort_reverse=False
3230 map oa chain set sort=atime; set sort_reverse=False
3231 map ot chain set sort=type; set sort_reverse=False
3232
3233 map oS chain set sort=size; set sort_reverse=True
3234 map oB chain set sort=basename; set sort_reverse=True
3235 map oN chain set sort=natural; set sort_reverse=True
3236 map oM chain set sort=mtime; set sort_reverse=True
3237 map oC chain set sort=ctime; set sort_reverse=True
3238 map oA chain set sort=atime; set sort_reverse=True
3239 map oT chain set sort=type; set sort_reverse=True
3240
3241 map dc get_cumulative_size
3242
3243 # Settings
3244 map zc toggle_option collapse_preview
3245 map zd toggle_option sort_directories_first
3246 map zh toggle_option show_hidden
3247 map <C-h> toggle_option show_hidden
3248 map zi toggle_option flushinput
3249 map zm toggle_option mouse_enabled
3250 map zp toggle_option preview_files
3251 map zP toggle_option preview_directories
3252 map zs toggle_option sort_case_insensitive
3253 map zu toggle_option autoupdate_cumulative_size
3254 map zv toggle_option use_preview_script
3255 map zf console filter
3256
3257 # Bookmarks
3258 map `<any> enter_bookmark %any
3259 map '<any> enter_bookmark %any
3260 map m<any> set_bookmark %any
3261 map um<any> unset_bookmark %any
3262
3263 map m<bg> draw_bookmarks
3264 copymap m<bg> um<bg> `<bg> '<bg>
3265
3266 # Generate all the chmod bindings with some python help:
3267 eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
3268 eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
3269 eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
3270 eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
3271 eval for arg in "rwxXst": cmd("map +{0} shell -d chmod u+{0} %s".format(arg))
3272
3273 eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
3274 eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
3275 eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
3276 eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
3277 eval for arg in "rwxXst": cmd("map -{0} shell -d chmod u-{0} %s".format(arg))
3278
3279 # ===================================================================
3280 # == Define keys for the console
3281 # ===================================================================
3282 # Note: Unmapped keys are passed directly to the console.
3283
3284 # Basic
3285 cmap <tab> eval fm.ui.console.tab()
3286 cmap <s-tab> eval fm.ui.console.tab(-1)
3287 cmap <ESC> eval fm.ui.console.close()
3288 cmap <CR> eval fm.ui.console.execute()
3289 cmap <C-l> redraw_window
3290
3291 copycmap <ESC> <C-c>
3292 copycmap <CR> <C-j>
3293
3294 # Move around
3295 cmap <up> eval fm.ui.console.history_move(-1)
3296 cmap <down> eval fm.ui.console.history_move(1)
3297 cmap <left> eval fm.ui.console.move(left=1)
3298 cmap <right> eval fm.ui.console.move(right=1)
3299 cmap <home> eval fm.ui.console.move(right=0, absolute=True)
3300 cmap <end> eval fm.ui.console.move(right=-1, absolute=True)
3301
3302 # Line Editing
3303 cmap <backspace> eval fm.ui.console.delete(-1)
3304 cmap <delete> eval fm.ui.console.delete(0)
3305 cmap <C-w> eval fm.ui.console.delete_word()
3306 cmap <C-k> eval fm.ui.console.delete_rest(1)
3307 cmap <C-u> eval fm.ui.console.delete_rest(-1)
3308 cmap <C-y> eval fm.ui.console.paste()
3309
3310 # And of course the emacs way
3311 copycmap <up> <C-p>
3312 copycmap <down> <C-n>
3313 copycmap <left> <C-b>
3314 copycmap <right> <C-f>
3315 copycmap <home> <C-a>
3316 copycmap <end> <C-e>
3317 copycmap <delete> <C-d>
3318 copycmap <backspace> <C-h>
3319
3320 # Note: There are multiple ways to express backspaces. <backspace> (code 263)
3321 # and <backspace2> (code 127). To be sure, use both.
3322 copycmap <backspace> <backspace2>
3323
3324 # This special expression allows typing in numerals:
3325 cmap <allow_quantifiers> false
3326
3327 # ===================================================================
3328 # == Pager Keybindings
3329 # ===================================================================
3330
3331 # Movement
3332 pmap <down> pager_move down=1
3333 pmap <up> pager_move up=1
3334 pmap <left> pager_move left=4
3335 pmap <right> pager_move right=4
3336 pmap <home> pager_move to=0
3337 pmap <end> pager_move to=-1
3338 pmap <pagedown> pager_move down=1.0 pages=True
3339 pmap <pageup> pager_move up=1.0 pages=True
3340 pmap <C-d> pager_move down=0.5 pages=True
3341 pmap <C-u> pager_move up=0.5 pages=True
3342
3343 copypmap <UP> k <C-p>
3344 copypmap <DOWN> j <C-n> <CR>
3345 copypmap <LEFT> h
3346 copypmap <RIGHT> l
3347 copypmap <HOME> g
3348 copypmap <END> G
3349 copypmap <C-d> d
3350 copypmap <C-u> u
3351 copypmap <PAGEDOWN> n f <C-F> <Space>
3352 copypmap <PAGEUP> p b <C-B>
3353
3354 # Basic
3355 pmap <ESC> pager_close
3356 copypmap <ESC> q Q i <F3>
3357 pmap E edit_file
3358
3359 # ===================================================================
3360 # == Taskview Keybindings
3361 # ===================================================================
3362
3363 # Movement
3364 tmap <up> taskview_move up=1
3365 tmap <down> taskview_move down=1
3366 tmap <home> taskview_move to=0
3367 tmap <end> taskview_move to=-1
3368 tmap <pagedown> taskview_move down=1.0 pages=True
3369 tmap <pageup> taskview_move up=1.0 pages=True
3370 tmap <C-d> taskview_move down=0.5 pages=True
3371 tmap <C-u> taskview_move up=0.5 pages=True
3372
3373 copytmap <UP> k <C-p>
3374 copytmap <DOWN> j <C-n> <CR>
3375 copytmap <HOME> g
3376 copytmap <END> G
3377 copytmap <C-u> u
3378 copytmap <PAGEDOWN> n f <C-F> <Space>
3379 copytmap <PAGEUP> p b <C-B>
3380
3381 # Changing priority and deleting tasks
3382 tmap J eval -q fm.ui.taskview.task_move(-1)
3383 tmap K eval -q fm.ui.taskview.task_move(0)
3384 tmap dd eval -q fm.ui.taskview.task_remove()
3385 tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
3386 tmap <pageup> eval -q fm.ui.taskview.task_move(0)
3387 tmap <delete> eval -q fm.ui.taskview.task_remove()
3388
3389 # Basic
3390 tmap <ESC> taskview_close
3391 copytmap <ESC> q Q w <C-c>
3392 #+end_src
3393
3394 *** scope.sh
3395 :PROPERTIES:
3396 :header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
3397 :END:
3398
3399 #+begin_src sh :tangle no
3400 # ranger supports enhanced previews. If the option "use_preview_script"
3401 # is set to True and this file exists, this script will be called and its
3402 # output is displayed in ranger. ANSI color codes are supported.
3403
3404 # NOTES: This script is considered a configuration file. If you upgrade
3405 # ranger, it will be left untouched. (You must update it yourself.)
3406 # Also, ranger disables STDIN here, so interactive scripts won't work properly
3407
3408 # Meanings of exit codes:
3409 # code | meaning | action of ranger
3410 # -----+------------+-------------------------------------------
3411 # 0 | success | success. display stdout as preview
3412 # 1 | no preview | failure. display no preview at all
3413 # 2 | plain text | display the plain content of the file
3414 # 3 | fix width | success. Don't reload when width changes
3415 # 4 | fix height | success. Don't reload when height changes
3416 # 5 | fix both | success. Don't ever reload
3417
3418 # Meaningful aliases for arguments:
3419 path="$1" # Full path of the selected file
3420 width="$2" # Width of the preview pane (number of fitting characters)
3421 height="$3" # Height of the preview pane (number of fitting characters)
3422
3423 maxln=200 # Stop after $maxln lines. Can be used like ls | head -n $maxln
3424
3425 # Find out something about the file:
3426 mimetype=$(file --mime-type -Lb "$path")
3427 extension=${path##*.}
3428
3429 # Functions:
3430 # runs a command and saves its output into $output. Useful if you need
3431 # the return value AND want to use the output in a pipe
3432 try() { output=$(eval '"$@"'); }
3433
3434 # writes the output of the previouosly used "try" command
3435 dump() { echo "$output"; }
3436
3437 # a common post-processing function used after most commands
3438 trim() { head -n "$maxln"; }
3439
3440 # wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
3441 highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }
3442
3443 case "$extension" in
3444 # Archive extensions:
3445 7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
3446 rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
3447 try als "$path" && { dump | trim; exit 0; }
3448 try acat "$path" && { dump | trim; exit 3; }
3449 try bsdtar -lf "$path" && { dump | trim; exit 0; }
3450 exit 1;;
3451 rar)
3452 try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
3453 # PDF documents:
3454 pdf)
3455 try pdftotext -l 10 -nopgbrk -q "$path" - && \
3456 { dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
3457 # BitTorrent Files
3458 torrent)
3459 try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
3460 # HTML Pages:
3461 htm|html|xhtml)
3462 try w3m -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3463 try lynx -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3464 try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3465 ;; # fall back to highlight/cat if the text browsers fail
3466 esac
3467
3468 case "$mimetype" in
3469 # Syntax highlight for text files:
3470 text/* | */xml)
3471 try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
3472 # Ascii-previews of images:
3473 image/*)
3474 img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
3475 # Display information about media files:
3476 video/* | audio/*)
3477 exiftool "$path" && exit 5
3478 # Use sed to remove spaces so the output fits into the narrow window
3479 try mediainfo "$path" && { dump | trim | sed 's/ \+:/: /;'; exit 5; } || exit 1;;
3480 esac
3481
3482 exit 1
3483 #+end_src
3484
3485 ** redshift
3486 :PROPERTIES:
3487 :header-args+: :tangle ~/.config/redshift.conf :comments none
3488 :END:
3489
3490 #+begin_src conf
3491 ; Global settings for redshift
3492 [redshift]
3493 ; Set the day and night screen temperatures (Neutral is 6500K)
3494 ;temp-day=5700
3495 ;temp-night=3500
3496
3497 ;temp-day=6500
3498 temp-day=6200
3499 ;temp-night=4800
3500 ;temp-night=5000
3501 ;temp-night=4500
3502 temp-night=4000
3503
3504 ; Enable/Disable a smooth transition between day and night
3505 ; 0 will cause a direct change from day to night screen temperature.
3506 ; 1 will gradually increase or decrease the screen temperature.
3507 transition=1
3508
3509 ; Set the screen brightness. Default is 1.0.
3510 ;brightness=0.9
3511 ; It is also possible to use different settings for day and night
3512 ; since version 1.8.
3513 ;brightness-day=0.7
3514 ;brightness-night=0.4
3515 ; Set the screen gamma (for all colors, or each color channel
3516 ; individually)
3517 ;gamma=0.8
3518 ;gamma=1.0
3519 ;gamma=0.8:0.7:0.8
3520 ; This can also be set individually for day and night since
3521 ; version 1.10.
3522 ;gamma-day=0.8:0.7:0.8
3523 ;gamma-night=0.6
3524
3525 ; Set the location-provider: 'geoclue2' or 'manual'
3526 ; type 'redshift -l list' to see possible values.
3527 ; The location provider settings are in a different section.
3528 ;location-provider=manual
3529 location-provider=geoclue2
3530
3531 ; Set the adjustment-method: 'randr', 'vidmode'
3532 ; type 'redshift -m list' to see all possible values.
3533 ; 'randr' is the preferred method, 'vidmode' is an older API.
3534 ; but works in some cases when 'randr' does not.
3535 ; The adjustment method settings are in a different section.
3536 adjustment-method=randr
3537
3538 ; Configuration of the location-provider:
3539 ; type 'redshift -l PROVIDER:help' to see the settings.
3540 ; ex: 'redshift -l manual:help'
3541 ; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
3542 ; are negative numbers.
3543 ;[manual]
3544 ;lat=48.1
3545 ;lon=11.6
3546
3547 ; Configuration of the adjustment-method
3548 ; type 'redshift -m METHOD:help' to see the settings.
3549 ; ex: 'redshift -m randr:help'
3550 ; In this example, randr is configured to adjust screen 1.
3551 ; Note that the numbering starts from 0, so this is actually the
3552 ; second screen. If this option is not specified, Redshift will try
3553 ; to adjust _all_ screens.
3554 ;[randr]
3555 ;screen=1
3556 #+end_src
3557
3558 ** rofi
3559 :PROPERTIES:
3560 :header-args+: :tangle ~/.config/rofi/config
3561 :END:
3562
3563 #+begin_src conf
3564 rofi.font: Ubuntu Mono 13
3565 ! rofi.font: Inconsolata 16
3566 ! rofi.font: Iosevka 13
3567 ! rofi.font: Source Code Pro 11
3568 rofi.modi: run,window
3569 ! rofi.width: 640
3570 rofi.width: 600
3571 !rofi.location: 2
3572 !rofi.yoffset: 200
3573 rofi.monitor: -1
3574 !rofi.lines: 10
3575
3576 !rofi.theme: /usr/share/rofi/themes//Arc.rasi
3577 !rofi.theme: /usr/share/rofi/themes//Paper.rasi
3578 !rofi.theme: /usr/share/rofi/themes//sidebar.rasi
3579
3580 rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
3581 #+end_src
3582
3583 ** rofi-pass
3584 :PROPERTIES:
3585 :header-args+: :tangle ~/.config/rofi-pass/config
3586 :END:
3587
3588 #+begin_src conf
3589 # permanently set alternative root dir
3590 # root=/path/to/root
3591
3592 # rofi command. Make sure to have "$@" as last argument
3593 _rofi () {
3594 #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
3595 rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
3596 }
3597
3598 # xdotool needs the keyboard layout to be set using setxkbmap
3599 # You can do this in your autostart scripts (e.g. xinitrc)
3600
3601 # If for some reason, you cannot do this, you can set the command here.
3602 # and set fix_layout to true
3603 fix_layout=false
3604
3605 layout_cmd () {
3606 setxkbmap us
3607 }
3608
3609 # fields to be used
3610 URL_field='url'
3611 USERNAME_field='user'
3612 AUTOTYPE_field='autotype'
3613
3614 # delay to be used for :delay keyword
3615 delay=2
3616
3617 ## Programs to be used
3618 # Editor
3619 EDITOR='gvim -f'
3620
3621 # Browser
3622 BROWSER='chromium'
3623
3624 ## Misc settings
3625
3626 default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
3627 auto_enter='false'
3628 notify='false'
3629 default_autotype='user :tab pass'
3630
3631 # color of the help messages
3632 # leave empty for autodetection
3633 help_color="#4872FF"
3634
3635 # Clipboard settings
3636 # Possible options: primary, clipboard, both
3637 clip=primary
3638
3639 # Options for generating new password entries
3640 # default_user is also used for password files that have no user field.
3641 default_user=aminb
3642 default_user2=aminban
3643 password_length=30
3644
3645 # Custom Keybindings
3646 #autotype="Alt+1"
3647 autotype="Alt+m"
3648 type_user="Alt+2"
3649 type_pass="Alt+3"
3650 open_url="Alt+4"
3651 copy_name="Alt+u"
3652 copy_url="Alt+l"
3653 copy_pass="Alt+p"
3654 show="Alt+o"
3655 copy_entry="Alt+2"
3656 type_entry="Alt+1"
3657 copy_menu="Alt+c"
3658 action_menu="Alt+a"
3659 type_menu="Alt+t"
3660 help="Alt+h"
3661 switch="Alt+x"
3662 insert_pass="Alt+n"
3663 #+end_src
3664
3665 ** sway
3666 :PROPERTIES:
3667 :header-args+: :tangle ~/.config/sway/config
3668 :END:
3669
3670 #+begin_src conf
3671 exec xrdb .Xresources
3672 exec dunst
3673 ### Variables
3674 # super
3675 set $mod Mod4
3676 # alt
3677 set $mod2 Mod1
3678 set $left h
3679 set $down j
3680 set $up k
3681 set $right l
3682 set $term urxvt
3683 set $menu rofi -show run -display-run '> ' -display-window ' 🗔 '
3684
3685 ### Output configuration
3686 #
3687 # Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/)
3688 output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
3689 #
3690 # Example configuration:
3691 #
3692 # output HDMI-A-1 resolution 1920x1080 position 1920,0
3693 #
3694 # You can get the names of your outputs by running: swaymsg -t get_outputs
3695
3696 ### Idle configuration
3697 #
3698 # Example configuration:
3699 #
3700 #exec swayidle \
3701 # timeout 300 'swaylock -c 000000' \
3702 # timeout 600 'swaymsg "output * dpms off"' \
3703 # resume 'swaymsg "output * dpms on"' \
3704 # before-sleep 'swaylock -c 000000'
3705 #
3706 # This will lock your screen after 300 seconds of inactivity, then turn off
3707 # your displays after another 600 seconds, and turn your screens back on when
3708 # resumed. It will also lock your screen before your computer goes to sleep.
3709
3710 ### Input configuration
3711
3712 input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
3713 dwt enabled
3714 tap enabled
3715 natural_scroll enabled
3716 middle_emulation enabled
3717 click_method clickfinger
3718 }
3719
3720 input "1:1:AT_Translated_Set_2_keyboard" {
3721 repeat_delay 200
3722 repeat_rate 45
3723 xkb_layout us,ir
3724 xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
3725 }
3726
3727
3728 ### Key bindings
3729 #
3730 # Basics:
3731 #
3732 # start a terminal
3733 bindsym $mod+Return exec $term
3734
3735 # kill focused window
3736 bindsym $mod+Shift+q kill
3737
3738 # start your launcher
3739 bindsym $mod+d exec $menu
3740
3741 # Drag floating windows by holding down $mod and left mouse button.
3742 # Resize them with right mouse button + $mod.
3743 # Despite the name, also works for non-floating windows.
3744 # Change normal to inverse to use left mouse button for resizing and right
3745 # mouse button for dragging.
3746 floating_modifier $mod normal
3747
3748 # reload the configuration file
3749 bindsym $mod+Shift+c reload
3750
3751 # exit sway (logs you out of your wayland session)
3752 bindsym $mod+Shift+e exit
3753
3754 bindsym $mod+apostrophe exec rofi-light # rofi-based brightness chooser
3755 bindsym XF86MonBrightnessUp exec light -A 5 # increase screen brightness
3756 bindsym XF86MonBrightnessDown exec light -U 5 # decrease screen brightness
3757
3758 bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
3759 bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
3760 bindsym XF86AudioMute exec pamixer --toggle-mute
3761 bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
3762
3763 # original sway workspace switch and window move
3764 bindsym $mod+bracketleft workspace prev
3765 bindsym $mod+bracketright workspace next
3766 bindsym $mod+braceleft move container to workspace prev
3767 bindsym $mod+braceright move container to workspace next
3768
3769 # bspwm-esque workspace switch and window move
3770 bindsym $mod2+bracketleft exec sway-ws-util switch prev
3771 bindsym $mod2+bracketright exec sway-ws-util switch next
3772 bindsym $mod2+braceleft exec sway-ws-util move prev follow
3773 bindsym $mod2+braceright exec sway-ws-util move next follow
3774 #
3775 # Moving around:
3776 #
3777 # Move your focus around
3778 bindsym $mod+$left focus left
3779 bindsym $mod+$down focus down
3780 bindsym $mod+$up focus up
3781 bindsym $mod+$right focus right
3782 # or use $mod+[up|down|left|right]
3783 bindsym $mod+Left focus left
3784 bindsym $mod+Down focus down
3785 bindsym $mod+Up focus up
3786 bindsym $mod+Right focus right
3787
3788 # _move_ the focused window with the same, but add Shift
3789 bindsym $mod+Shift+$left move left
3790 bindsym $mod+Shift+$down move down
3791 bindsym $mod+Shift+$up move up
3792 bindsym $mod+Shift+$right move right
3793 # ditto, with arrow keys
3794 bindsym $mod+Shift+Left move left
3795 bindsym $mod+Shift+Down move down
3796 bindsym $mod+Shift+Up move up
3797 bindsym $mod+Shift+Right move right
3798 #
3799 # Workspaces:
3800 #
3801 # switch to workspace
3802 bindsym $mod+1 workspace 1
3803 bindsym $mod+2 workspace 2
3804 bindsym $mod+3 workspace 3
3805 bindsym $mod+4 workspace 4
3806 bindsym $mod+5 workspace 5
3807 bindsym $mod+6 workspace 6
3808 bindsym $mod+7 workspace 7
3809 bindsym $mod+8 workspace 8
3810 bindsym $mod+9 workspace 9
3811 bindsym $mod+0 workspace 10
3812 # move focused container to workspace
3813 bindsym $mod+Shift+1 move container to workspace 1
3814 bindsym $mod+Shift+2 move container to workspace 2
3815 bindsym $mod+Shift+3 move container to workspace 3
3816 bindsym $mod+Shift+4 move container to workspace 4
3817 bindsym $mod+Shift+5 move container to workspace 5
3818 bindsym $mod+Shift+6 move container to workspace 6
3819 bindsym $mod+Shift+7 move container to workspace 7
3820 bindsym $mod+Shift+8 move container to workspace 8
3821 bindsym $mod+Shift+9 move container to workspace 9
3822 bindsym $mod+Shift+0 move container to workspace 10
3823 # Note: workspaces can have any name you want, not just numbers.
3824 # We just use 1-10 as the default.
3825 #
3826 # Layout stuff:
3827 #
3828 # You can "split" the current object of your focus with
3829 # $mod+b or $mod+v, for horizontal and vertical splits
3830 # respectively.
3831 bindsym $mod+b splith
3832 bindsym $mod+v splitv
3833
3834 # Switch the current container between different layout styles
3835 bindsym $mod+s layout stacking
3836 bindsym $mod+w layout tabbed
3837 bindsym $mod+e layout toggle split
3838
3839 # Make the current focus fullscreen
3840 bindsym $mod+f fullscreen
3841
3842 # Toggle the current focus between tiling and floating mode
3843 bindsym $mod+Shift+space floating toggle
3844
3845 # Swap focus between the tiling area and the floating area
3846 bindsym $mod+space focus mode_toggle
3847
3848 # move focus to the parent container
3849 bindsym $mod+a focus parent
3850 #
3851 # Scratchpad:
3852 #
3853 # Sway has a "scratchpad", which is a bag of holding for windows.
3854 # You can send windows there and get them back later.
3855
3856 # Move the currently focused window to the scratchpad
3857 bindsym $mod+Shift+minus move scratchpad
3858
3859 # Show the next scratchpad window or hide the focused scratchpad window.
3860 # If there are multiple scratchpad windows, this command cycles through them.
3861 bindsym $mod+minus scratchpad show
3862 #
3863 # Resizing containers:
3864 #
3865 mode "resize" {
3866 # left will shrink the containers width
3867 # right will grow the containers width
3868 # up will shrink the containers height
3869 # down will grow the containers height
3870 bindsym $left resize shrink width 10px
3871 bindsym $down resize grow height 10px
3872 bindsym $up resize shrink height 10px
3873 bindsym $right resize grow width 10px
3874
3875 # ditto, with arrow keys
3876 bindsym Left resize shrink width 10px
3877 bindsym Down resize grow height 10px
3878 bindsym Up resize shrink height 10px
3879 bindsym Right resize grow width 10px
3880
3881 # return to default mode
3882 bindsym Return mode "default"
3883 bindsym Escape mode "default"
3884 }
3885 bindsym $mod+Shift+r mode "resize"
3886
3887 #
3888 # Status Bar:
3889 #
3890 # Read `man 5 sway-bar` for more information about this section.
3891 bar {
3892 position bottom
3893 colors {
3894 statusline #ffffff
3895 background #323232
3896 inactive_workspace #32323200 #32323200 #5c5c5c
3897 }
3898 status_command i3gs ~/.config/i3gs/config
3899 }
3900
3901 include /etc/sway/config.d/*
3902 #+end_src
3903
3904 ** TLP
3905
3906 *** TODO enigma
3907 *** plasma
3908
3909 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/default/tlp")
3910 # ------------------------------------------------------------------------------
3911 # tlp - Parameters for power saving
3912 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
3913
3914 # Hint: some features are disabled by default, remove the leading # to enable
3915 # them.
3916
3917 # Set to 0 to disable, 1 to enable TLP.
3918 TLP_ENABLE=1
3919
3920 # Operation mode when no power supply can be detected: AC, BAT.
3921 # Concerns some desktop and embedded hardware only.
3922 TLP_DEFAULT_MODE=AC
3923
3924 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
3925 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
3926 TLP_PERSISTENT_DEFAULT=0
3927
3928 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
3929 # Non-zero value enables, zero disables laptop mode.
3930 DISK_IDLE_SECS_ON_AC=0
3931 DISK_IDLE_SECS_ON_BAT=2
3932
3933 # Dirty page values (timeouts in secs).
3934 MAX_LOST_WORK_SECS_ON_AC=15
3935 MAX_LOST_WORK_SECS_ON_BAT=60
3936
3937 # Hint: CPU parameters below are disabled by default, remove the leading #
3938 # to enable them, otherwise kernel default values are used.
3939
3940 # Select a CPU frequency scaling governor.
3941 # Intel Core i processor with intel_pstate driver:
3942 # powersave(*), performance.
3943 # Older hardware with acpi-cpufreq driver:
3944 # ondemand(*), powersave, performance, conservative, schedutil.
3945 # (*) is recommended.
3946 # Hint: use tlp-stat -p to show the active driver and available governors.
3947 # Important:
3948 # powersave for intel_pstate and ondemand for acpi-cpufreq are power
3949 # efficient for *almost all* workloads and therefore kernel and most
3950 # distributions have chosen them as defaults. If you still want to change,
3951 # you should know what you're doing! You *must* disable your distribution's
3952 # governor settings or conflicts will occur.
3953 #CPU_SCALING_GOVERNOR_ON_AC=powersave
3954 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
3955
3956 # Set the min/max frequency available for the scaling governor.
3957 # Possible values strongly depend on your CPU. For available frequencies see
3958 # the output of tlp-stat -p.
3959 #CPU_SCALING_MIN_FREQ_ON_AC=0
3960 #CPU_SCALING_MAX_FREQ_ON_AC=0
3961 #CPU_SCALING_MIN_FREQ_ON_BAT=0
3962 #CPU_SCALING_MAX_FREQ_ON_BAT=0
3963
3964 # Set energy performance hints (HWP) for Intel P-state governor:
3965 # performance, balance_performance, default, balance_power, power
3966 # Values are given in order of increasing power saving.
3967 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
3968 CPU_HWP_ON_AC=balance_performance
3969 CPU_HWP_ON_BAT=balance_power
3970
3971 # Set Intel P-state performance: 0..100 (%).
3972 # Limit the max/min P-state to control the power dissipation of the CPU.
3973 # Values are stated as a percentage of the available performance.
3974 # Requires an Intel Core i processor with intel_pstate driver.
3975 #CPU_MIN_PERF_ON_AC=0
3976 #CPU_MAX_PERF_ON_AC=100
3977 #CPU_MIN_PERF_ON_BAT=0
3978 #CPU_MAX_PERF_ON_BAT=30
3979
3980 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
3981 # Requires an Intel Core i processor.
3982 # Important:
3983 # - This may conflict with your distribution's governor settings
3984 # - A value of 1 does *not* activate boosting, it just allows it
3985 #CPU_BOOST_ON_AC=1
3986 #CPU_BOOST_ON_BAT=0
3987
3988 # Minimize number of used CPU cores/hyper-threads under light load conditions:
3989 # 0=disable, 1=enable.
3990 SCHED_POWERSAVE_ON_AC=0
3991 SCHED_POWERSAVE_ON_BAT=1
3992
3993 # Kernel NMI Watchdog:
3994 # 0=disable (default, saves power), 1=enable (for kernel debugging only).
3995 NMI_WATCHDOG=0
3996
3997 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
3998 # Frequency voltage pairs are written to:
3999 # /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
4000 # CAUTION: only use this, if you thoroughly understand what you are doing!
4001 #PHC_CONTROLS="F:V F:V F:V F:V"
4002
4003 # Set CPU performance versus energy savings policy:
4004 # performance, balance-performance, default, balance-power, power.
4005 # Values are given in order of increasing power saving.
4006 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
4007 ENERGY_PERF_POLICY_ON_AC=performance
4008 ENERGY_PERF_POLICY_ON_BAT=balance-power
4009
4010 # Disk devices; separate multiple devices with spaces (default: sda).
4011 # Devices can be specified by disk ID also (lookup with: tlp diskid).
4012 DISK_DEVICES="sda sdb"
4013
4014 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
4015 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
4016 # Separate values for multiple disks with spaces. Use the special value 'keep'
4017 # to keep the hardware default for the particular disk.
4018 DISK_APM_LEVEL_ON_AC="254 254"
4019 DISK_APM_LEVEL_ON_BAT="128 128"
4020
4021 # Hard disk spin down timeout:
4022 # 0: spin down disabled
4023 # 1..240: timeouts from 5s to 20min (in units of 5s)
4024 # 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
4025 # See 'man hdparm' for details.
4026 # Separate values for multiple disks with spaces. Use the special value 'keep'
4027 # to keep the hardware default for the particular disk.
4028 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
4029 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
4030
4031 # Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
4032 # Separate values for multiple disks with spaces. Use the special value 'keep'
4033 # to keep the kernel default scheduler for the particular disk.
4034 #DISK_IOSCHED="cfq cfq"
4035
4036 # AHCI link power management (ALPM) for disk devices:
4037 # min_power, med_power_with_dipm(*), medium_power, max_performance.
4038 # (*) Kernel >= 4.15 required, then recommended.
4039 # Multiple values separated with spaces are tried sequentially until success.
4040 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
4041 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
4042
4043 # Exclude host devices from AHCI link power management.
4044 # Separate multiple hosts with spaces.
4045 #SATA_LINKPWR_BLACKLIST="host1"
4046
4047 # Runtime Power Management for AHCI host and disks devices:
4048 # on=disable, auto=enable.
4049 # EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
4050 #AHCI_RUNTIME_PM_ON_AC=on
4051 #AHCI_RUNTIME_PM_ON_BAT=on
4052
4053 # Seconds of inactivity before disk is suspended.
4054 AHCI_RUNTIME_PM_TIMEOUT=15
4055
4056 # PCI Express Active State Power Management (PCIe ASPM):
4057 # default, performance, powersave.
4058 PCIE_ASPM_ON_AC=performance
4059 PCIE_ASPM_ON_BAT=powersave
4060
4061 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
4062 # auto = mid on BAT, high on AC; default = use hardware defaults.
4063 RADEON_POWER_PROFILE_ON_AC=high
4064 RADEON_POWER_PROFILE_ON_BAT=low
4065
4066 # Radeon dynamic power management method (DPM): battery, performance.
4067 RADEON_DPM_STATE_ON_AC=performance
4068 RADEON_DPM_STATE_ON_BAT=battery
4069
4070 # Radeon DPM performance level: auto, low, high; auto is recommended.
4071 RADEON_DPM_PERF_LEVEL_ON_AC=auto
4072 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4073
4074 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4075 WIFI_PWR_ON_AC=off
4076 WIFI_PWR_ON_BAT=on
4077
4078 # Disable wake on LAN: Y/N.
4079 WOL_DISABLE=Y
4080
4081 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4082 # A value of 0 disables, >=1 enables power saving (recommended: 1).
4083 SOUND_POWER_SAVE_ON_AC=0
4084 SOUND_POWER_SAVE_ON_BAT=0
4085
4086 # Disable controller too (HDA only): Y/N.
4087 SOUND_POWER_SAVE_CONTROLLER=N
4088
4089 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4090 # Drive can be powered on again by releasing (and reinserting) the eject lever
4091 # or by pressing the disc eject button on newer models.
4092 # Note: an UltraBay/MediaBay hard disk is never powered off.
4093 BAY_POWEROFF_ON_AC=0
4094 BAY_POWEROFF_ON_BAT=0
4095 # Optical drive device to power off (default sr0).
4096 BAY_DEVICE="sr0"
4097
4098 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4099 RUNTIME_PM_ON_AC=on
4100 RUNTIME_PM_ON_BAT=auto
4101
4102 # Exclude PCI(e) device adresses the following list from Runtime PM
4103 # (separate with spaces). Use lspci to get the adresses (1st column).
4104 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4105 RUNTIME_PM_BLACKLIST="01:00.0"
4106
4107 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4108 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4109 # prevents accidential power-on of dGPU in hybrid graphics setups.
4110 # Use "" to disable the feature completely.
4111 # Separate multiple drivers with spaces.
4112 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4113
4114 # Set to 0 to disable, 1 to enable USB autosuspend feature.
4115 USB_AUTOSUSPEND=1
4116
4117 # Exclude listed devices from USB autosuspend (separate with spaces).
4118 # Use lsusb to get the ids.
4119 # Note: input devices (usbhid) are excluded automatically
4120 #USB_BLACKLIST="1111:2222 3333:4444"
4121
4122 # Bluetooth devices are excluded from USB autosuspend:
4123 # 0=do not exclude, 1=exclude.
4124 USB_BLACKLIST_BTUSB=0
4125
4126 # Phone devices are excluded from USB autosuspend:
4127 # 0=do not exclude, 1=exclude (enable charging).
4128 USB_BLACKLIST_PHONE=0
4129
4130 # Printers are excluded from USB autosuspend:
4131 # 0=do not exclude, 1=exclude.
4132 USB_BLACKLIST_PRINTER=1
4133
4134 # WWAN devices are excluded from USB autosuspend:
4135 # 0=do not exclude, 1=exclude.
4136 USB_BLACKLIST_WWAN=1
4137
4138 # Include listed devices into USB autosuspend even if already excluded
4139 # by the blacklists above (separate with spaces).
4140 # Use lsusb to get the ids.
4141 #USB_WHITELIST="1111:2222 3333:4444"
4142
4143 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4144 # (workaround for USB devices that cause shutdown problems).
4145 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4146
4147 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4148 # on system startup: 0=disable, 1=enable.
4149 # Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4150 # are ignored when this is enabled!
4151 #RESTORE_DEVICE_STATE_ON_STARTUP=0
4152 RESTORE_DEVICE_STATE_ON_STARTUP=1
4153
4154 # Radio devices to disable on startup: bluetooth, wifi, wwan.
4155 # Separate multiple devices with spaces.
4156 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
4157
4158 # Radio devices to enable on startup: bluetooth, wifi, wwan.
4159 # Separate multiple devices with spaces.
4160 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4161
4162 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4163 # (workaround for devices that are blocking shutdown).
4164 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4165
4166 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4167 # (to prevent other operating systems from missing radios).
4168 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4169
4170 # Radio devices to enable on AC: bluetooth, wifi, wwan.
4171 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4172
4173 # Radio devices to disable on battery: bluetooth, wifi, wwan.
4174 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4175
4176 # Radio devices to disable on battery when not in use (not connected):
4177 # bluetooth, wifi, wwan.
4178 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4179
4180 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4181 # required). Charging starts when the remaining capacity falls below the
4182 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4183 # Main / Internal battery (values in %)
4184 #START_CHARGE_THRESH_BAT0=75
4185 #STOP_CHARGE_THRESH_BAT0=80
4186 # Ultrabay / Slice / Replaceable battery (values in %)
4187 #START_CHARGE_THRESH_BAT1=75
4188 #STOP_CHARGE_THRESH_BAT1=80
4189
4190 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4191 #RESTORE_THRESHOLDS_ON_BAT=1
4192
4193 # ------------------------------------------------------------------------------
4194 # tlp-rdw - Parameters for the radio device wizard
4195 # Possible devices: bluetooth, wifi, wwan.
4196
4197 # Hints:
4198 # - Parameters are disabled by default, remove the leading # to enable them
4199 # - Separate multiple radio devices with spaces
4200
4201 # Radio devices to disable on connect.
4202 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4203 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4204 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4205
4206 # Radio devices to enable on disconnect.
4207 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4208 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4209 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4210
4211 # Radio devices to enable/disable when docked.
4212 #DEVICES_TO_ENABLE_ON_DOCK=""
4213 #DEVICES_TO_DISABLE_ON_DOCK=""
4214
4215 # Radio devices to enable/disable when undocked.
4216 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4217 #DEVICES_TO_DISABLE_ON_UNDOCK=""
4218 #+end_src
4219
4220 ** X
4221
4222 *** xprofile
4223 :PROPERTIES:
4224 :header-args+: :tangle ~/.xprofile
4225 :END:
4226
4227 =~/.xprofile= is similar in style to =~/.xinitrc=, but on the
4228 contrary, it's automatically sourced by LightDM, my display manager of
4229 choice.
4230
4231 #+begin_src sh :tangle no
4232 xset -b # disable bell
4233 xset r rate 200 45 # repeat delay (ms) and rate (repeats/sec)
4234
4235 # setxkbmap -option compose:ralt
4236
4237 setxkbmap -option ctrl:nocaps # turn capslock into control
4238 setxkbmap -option altwin:swap_alt_win # swap alt and super
4239
4240 if [ $(hostname) = "plasma" ]
4241 then
4242 setxkbmap -option ctrl:rctrl_ralt # turn right control into right alt
4243 fi
4244
4245 if [ $(hostname) = "enigma" ]
4246 then
4247 xmodmap -e "keycode 135 = Alt_R" # remap menu key to alt
4248 fi
4249
4250 light -Scrs "intel_backlight" 2
4251
4252 source $HOME/.zprofile
4253
4254 export _JAVA_AWT_WM_NONREPARENTING=1
4255 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4256
4257 if [ $(hostname) = "plasma" ]
4258 then
4259 unlock-def-gk.py &
4260 fi
4261
4262 bspwm &
4263 #+end_src
4264
4265 *** X resources
4266
4267 **** Xresources
4268 :PROPERTIES:
4269 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
4270 :END:
4271
4272 #+begin_src conf-xdefaults
4273 #include ".Xresources.d/fonts"
4274 ! #include ".Xresources.d/colors"
4275 #include ".Xresources.d/emacs"
4276 #include ".Xresources.d/rxvt-unicode"
4277 #+end_src
4278
4279 **** Xresources.d
4280
4281 ***** fonts
4282 :PROPERTIES:
4283 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
4284 :END:
4285
4286 #+begin_src conf-xdefaults
4287 Xft.lcdfilter: lcddefault
4288 Xft.antialias: true
4289 Xft.autohint: 0
4290 Xft.hinting: true
4291 Xft.hintstyle: hintslight
4292 ! Xft.hintstyle: hintfull
4293 Xft.rgba: rgb
4294 Xft.dpi: 96
4295 #+end_src
4296
4297 ***** colors
4298 :PROPERTIES:
4299 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
4300 :END:
4301
4302 #+begin_src conf-xdefaults :tangle no
4303 #include "gruvbox-light.xresources"
4304 ! #include "gruvbox-dark.xresources"
4305 #include "gruvbox-urxvt256.xresources"
4306 #+end_src
4307
4308 #+begin_src conf-xdefaults :tangle no
4309 ! -----------------------------------------------------------------------------
4310 ! File: gruvbox-light.xresources
4311 ! Description: Retro groove colorscheme generalized
4312 ! Author: morhetz <morhetz@gmail.com>
4313 ! Source: https://github.com/morhetz/gruvbox-generalized
4314 ! Last Modified: 6 Sep 2014
4315 ! -----------------------------------------------------------------------------
4316
4317 ! hard contrast: *background: #f9f5d7
4318 *background: #fbf1c7
4319 ! soft contrast: *background: #f2e5bc
4320 *foreground: #3c3836
4321 ! Black + DarkGrey
4322 *color0: #fdf4c1
4323 *color8: #928374
4324 ! DarkRed + Red
4325 *color1: #cc241d
4326 *color9: #9d0006
4327 ! DarkGreen + Green
4328 *color2: #98971a
4329 *color10: #79740e
4330 ! DarkYellow + Yellow
4331 *color3: #d79921
4332 *color11: #b57614
4333 ! DarkBlue + Blue
4334 *color4: #458588
4335 *color12: #076678
4336 ! DarkMagenta + Magenta
4337 *color5: #b16286
4338 *color13: #8f3f71
4339 ! DarkCyan + Cyan
4340 *color6: #689d6a
4341 *color14: #427b58
4342 ! LightGrey + White
4343 *color7: #7c6f64
4344 *color15: #3c3836
4345 #+end_src
4346
4347 #+begin_src conf-xdefaults :tangle no
4348 ! -----------------------------------------------------------------------------
4349 ! File: gruvbox-dark.xresources
4350 ! Description: Retro groove colorscheme generalized
4351 ! Author: morhetz <morhetz@gmail.com>
4352 ! Source: https://github.com/morhetz/gruvbox-generalized
4353 ! Last Modified: 6 Sep 2014
4354 ! -----------------------------------------------------------------------------
4355
4356 ! hard contrast: *background: #1d2021
4357 *background: #282828
4358 ! soft contrast: *background: #32302f
4359 *foreground: #ebdbb2
4360 ! Black + DarkGrey
4361 *color0: #282828
4362 *color8: #928374
4363 ! DarkRed + Red
4364 *color1: #cc241d
4365 *color9: #fb4934
4366 ! DarkGreen + Green
4367 *color2: #98971a
4368 *color10: #b8bb26
4369 ! DarkYellow + Yellow
4370 *color3: #d79921
4371 *color11: #fabd2f
4372 ! DarkBlue + Blue
4373 *color4: #458588
4374 *color12: #83a598
4375 ! DarkMagenta + Magenta
4376 *color5: #b16286
4377 *color13: #d3869b
4378 ! DarkCyan + Cyan
4379 *color6: #689d6a
4380 *color14: #8ec07c
4381 ! LightGrey + White
4382 *color7: #a89984
4383 *color15: #ebdbb2
4384 #+end_src
4385
4386 #+begin_src conf-xdefaults :tangle no
4387 ! -----------------------------------------------------------------------------
4388 ! File: gruvbox-urxvt256.xresources
4389 ! Description: Retro groove colorscheme generalized
4390 ! Author: morhetz <morhetz@gmail.com>
4391 ! Source: https://github.com/morhetz/gruvbox-generalized
4392 ! Last Modified: 13 Dec 2013
4393 ! -----------------------------------------------------------------------------
4394
4395 URxvt.color24: #076678
4396 URxvt.color66: #427b58
4397 URxvt.color88: #9d0006
4398 URxvt.color96: #8f3f71
4399 URxvt.color100: #79740e
4400 URxvt.color108: #8ec07c
4401 URxvt.color109: #83a598
4402 URxvt.color130: #af3a03
4403 URxvt.color136: #b57614
4404 URxvt.color142: #b8bb26
4405 URxvt.color167: #fb4934
4406 URxvt.color175: #d3869b
4407 URxvt.color208: #fe8019
4408 URxvt.color214: #fabd2f
4409 URxvt.color223: #ebdbb2
4410 URxvt.color228: #f2e5bc
4411 URxvt.color229: #fbf1c7
4412 URxvt.color230: #f9f5d7
4413 URxvt.color234: #1d2021
4414 URxvt.color235: #282828
4415 URxvt.color236: #32302f
4416 URxvt.color237: #3c3836
4417 URxvt.color239: #504945
4418 URxvt.color241: #665c54
4419 URxvt.color243: #7c6f64
4420 URxvt.color244: #928374
4421 URxvt.color245: #928374
4422 URxvt.color246: #a89984
4423 URxvt.color248: #bdae93
4424 URxvt.color250: #d5c4a1
4425 #+end_src
4426
4427 ***** emacs
4428 :PROPERTIES:
4429 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
4430 :END:
4431
4432 #+begin_src conf-xdefaults
4433 Emacs.menuBar: off
4434 Emacs.toolBar: off
4435 Emacs.verticalScrollBars: off
4436 Emacs.cursorBlink: off
4437 Emacs.FontBackend: xft,x
4438 ! Emacs.font: Ubuntu Mono-12
4439 ! Emacs.font: Triplicate T4C-11
4440 ! Emacs.font: Ubuntu Mono-10.5
4441 ! Emacs.font: Ubuntu Mono-12
4442 ! Emacs.font: Iosevka-11
4443
4444 ! Emacs.font: Fira Mono:size=15
4445 ! Emacs.font: DejaVu Sans Mono:size=15
4446 ! Emacs.font: Inconsolata:size=17
4447 ! Emacs.font: Inconsolata:size=16
4448 ! Emacs.font: Inconsolata LGC:size=14
4449 ! Emacs.font: Source Code Pro Medium-10.5
4450 Emacs.font: Ubuntu Mono:size=16
4451 ! Emacs.font: Iosevka:size=16
4452 #+end_src
4453
4454 ***** rxvt-unicode
4455 :PROPERTIES:
4456 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
4457 :END:
4458
4459 #+begin_src conf-xdefaults
4460 ! Font
4461 URxvt.font: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
4462 URxvt.boldFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
4463 URxvt.italicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
4464 URxvt.bolditalicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
4465
4466 URxvt.xftAntialias: true
4467 URxvt.letterSpace: 0
4468
4469 URxvt.depth: 0
4470 URxvt.loginShell: true
4471 URxvt.saveLines: 100000
4472 URxvt.internalBorder: 3
4473 URxvt.lineSpace: 0
4474 URxvt.scrollBar: false
4475 URxvt.scrollStyle: rxvt
4476 URxvt*scrollTtyOutput: false
4477 URxvt*scrollWithBuffer: true
4478 URxvt*scrollTtyKeypress: true
4479 URxvt.keysym.Shift-Up: command:\033]720;1\007
4480 URxvt.keysym.Shift-Down: command:\033]721;1\007
4481
4482 URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select
4483 URxvt.perl-ext: bidi
4484 URxvt.bidi.enabled: 1
4485 URxvt.url-select.launcher: firefox
4486 URxvt.url-select.underline: true
4487 URxvt.keysym.M-u: perl:url-select:select_next
4488 URxvt.keysym.M-Escape: perl:keyboard-select:activate
4489 URxvt.keysym.M-s: perl:keyboard-select:search
4490 URxvt.url-launcher: /usr/bin/firefox
4491 URxvt.matcher.button: 1
4492 URxvt.iso14755: false
4493 URxvt.iso14755_53: false
4494 URxvt.keysym.M-c: perl:clipboard:copy
4495 URxvt.keysym.M-v: perl:clipboard:paste
4496 URxvt.keysym.C-A-V: perl:clipboard:paste_escaped
4497 URxvt.keysym.C-Up: font-size:increase
4498 URxvt.keysym.C-Down: font-size:decrease
4499 URxvt.keysym.C-S-Up: font-size:incglobal
4500 URxvt.keysym.C-S-Down: font-size:decglobal
4501 URxvt.keysym.C-equal: font-size:reset
4502 !URxvt.keysym.C-question: font-size:show
4503
4504 URxvt.iconFile: /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
4505
4506 !urxvt*foreground: white
4507 !urxvt*background: black
4508
4509 !*color0: #2E3436
4510 !*color1: #a40000
4511 !*color2: #4E9A06
4512 !*color3: #C4A000
4513 !*color4: #3465A4
4514 !*color5: #75507B
4515 !*color6: #ce5c00
4516 !*color7: #babdb9
4517 !*color8: #555753
4518 !*color9: #EF2929
4519 !*color10: #8AE234
4520 !*color11: #FCE94F
4521 !*color12: #729FCF
4522 !*color13: #AD7FA8
4523 !*color14: #fcaf3e
4524 !*color15: #EEEEEC
4525
4526 !URxvt.foreground: #C8C8C8
4527 !URxvt.background: #FFFFFF
4528
4529 !! black
4530 !*color0: #2E3436
4531 !*color8: #555753
4532 !! red
4533 !*color1: #a40000
4534 !*color9: #EF2929
4535 !! green
4536 !*color2: #4E9A06
4537 !*color10: #8AE234
4538 !! yellow
4539 !*color3: #C4A000
4540 !*color11: #FCE94F
4541 !! blue
4542 !*color4: #3465A4
4543 !*color12: #729FCF
4544 !! purple
4545 !*color5: #75507B
4546 !*color13: #AD7FA8
4547 !! orange (replaces cyan)
4548 !*color6: #ce5c00
4549 !*color14: #fcaf3e
4550 !! white
4551 !*color7: #babdb9
4552 !*color15: #EEEEEC
4553
4554 ! Tango colour theme for rxvt-unicode
4555 URxvt.background: #FFFFFF
4556 URxvt.foreground: #000000
4557
4558 ! Black
4559 URxvt.color0: #2E3436
4560 URxvt.color8: #757773
4561
4562 ! Red
4563 URxvt.color1: #CC0000
4564 URxvt.color9: #EF2929
4565
4566 ! Green
4567 URxvt.color2: #4E9A06
4568 URxvt.color10: #8AE234
4569
4570 ! Yellow
4571 URxvt.color3: #C4A000
4572 URxvt.color11: #FCE94F
4573
4574 ! Blue
4575 URxvt.color4: #3465A4
4576 URxvt.color12: #729FCF
4577
4578 ! Magenta
4579 URxvt.color5: #75507B
4580 URxvt.color13: #AD7FA8
4581
4582 !! Cyan
4583 !URxvt.color6: #06989A
4584 !URxvt.color14: #34E2E2
4585 ! orange (replaces cyan)
4586 *color6: #ce5c00
4587 *color14: #fcaf3e
4588
4589 ! White
4590 URxvt.color7: #D3D7CF
4591 URxvt.color15: #EEEEEC
4592 #+end_src
4593
4594 ** XDG
4595 :PROPERTIES:
4596 :header-args+: :tangle ~/.config/user-dirs.dirs
4597 :END:
4598
4599 #+begin_src conf
4600 XDG_DESKTOP_DIR="$HOME/Desktop"
4601 XDG_DOCUMENTS_DIR="$HOME/usr/docs"
4602 XDG_DOWNLOAD_DIR="$HOME/usr/dls"
4603 XDG_MUSIC_DIR="$HOME/usr/music"
4604 XDG_PICTURES_DIR="$HOME/usr/pics"
4605 XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
4606 XDG_TEMPLATES_DIR="$HOME/usr/Templates"
4607 XDG_VIDEOS_DIR="$HOME/usr/vids"
4608 #+end_src
4609
4610 ** Zathura
4611 :PROPERTIES:
4612 :header-args+: :tangle ~/.config/zathura/zathurarc
4613 :END:
4614
4615 #+begin_src conf
4616 set smooth-scroll true
4617 set selection-clipboard clipboard
4618 set zoom-step 05
4619 set default-bg "#272727"
4620 set statusbar-bg "#272727"
4621 set inputbar-bg "#373737"
4622 #+end_src
4623
4624 ** Zsh
4625
4626 My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
4627 [[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
4628 installed.
4629
4630 *** zimrc
4631 :PROPERTIES:
4632 :header-args+: :tangle ~/.zimrc
4633 :END:
4634
4635 #+begin_src sh
4636
4637
4638 #################
4639 # CORE SETTINGS #
4640 #################
4641
4642 #
4643 # Zim settings
4644 #
4645
4646 # Select what modules you would like enabled.
4647 # The second line of modules may depend on options set by modules in the first
4648 # line. These dependencies are noted on the respective module's README.md.
4649 zmodules=(directory environment git git-info history input ssh utility custom \
4650 syntax-highlighting history-substring-search prompt completion)
4651
4652
4653 ###################
4654 # MODULE SETTINGS #
4655 ###################
4656
4657 #
4658 # Prompt
4659 #
4660
4661 # Set your desired prompt here
4662 zprompt_theme='pure'
4663 #PURE_PROMPT_SYMBOL=λ
4664 #PURE_PROMPT_SYMBOL=δ
4665 PURE_PROMPT_SYMBOL=➜
4666
4667 #
4668 # Completion
4669 #
4670
4671 # set an optional host-specific filename for the completion cache file
4672 # if none is provided, the default '.zcompdump' is used.
4673 #zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
4674
4675 #
4676 # Utility
4677 #
4678
4679 # Uncomment to enable command correction prompts
4680 # See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
4681 setopt CORRECT
4682
4683 #
4684 # Environment
4685 #
4686
4687 # Set the string below to the desired terminal title format string.
4688 # The terminal title is redrawn upon directory change, however, variables like
4689 # ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
4690 # http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
4691 # The example below uses the following format: 'username@host:/current/directory'
4692 ztermtitle='%n@%m:%~'
4693
4694 #
4695 # Input
4696 #
4697
4698 # Uncomment to enable double-dot expansion.
4699 # This appends '../' to your input for each '.' you type after an initial '..'
4700 #zdouble_dot_expand='true'
4701
4702 #
4703 # Syntax-Highlighting
4704 #
4705
4706 # This determines what highlighters will be used with the syntax-highlighting module.
4707 # Documentation of the highlighters can be found here:
4708 # https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
4709 # For (u)rxvt, termite and gnome-terminal users,
4710 # removing the 'cursor' highlighter will fix the disappearing cursor problem
4711 #zhighlighters=(main brackets cursor)
4712 zhighlighters=(main brackets pattern)
4713
4714
4715 #
4716 # SSH
4717 #
4718
4719 # Load these ssh identities with the ssh module
4720 zssh_ids=(id_rsa plasma_id_rsa id_ed25519 id_rsa_aur)
4721
4722
4723 #
4724 # Pacman
4725 #
4726
4727 # Set (optional) pacman front-end.
4728 zpacman_frontend='yay'
4729
4730 # Load any helper scripts as defined here
4731 #zpacman_helper=(aur)
4732 #+end_src
4733
4734 *** zlogin
4735 :PROPERTIES:
4736 :header-args+: :tangle ~/.zlogin
4737 :END:
4738
4739 #+begin_src sh
4740
4741
4742 #
4743 # User configuration sourced by login shells
4744 #
4745
4746 # Initialize zim
4747 [[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
4748 #+end_src
4749
4750 *** zprofile
4751 :PROPERTIES:
4752 :header-args+: :tangle ~/.zprofile
4753 :END:
4754
4755 #+begin_src sh
4756 #PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
4757 #PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
4758 export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
4759 export XDG_CONFIG_HOME=$HOME/.config
4760 export XDG_DATA_HOME=$HOME/.local/share
4761 export XDG_DATA_DIRS=/usr/local/share:/usr/share
4762 export MAILDIR="$HOME/mail"
4763 export CVS_RSH=ssh
4764 #export MATHMODELS=$HOME/src/eiffel/mathmodels
4765 #export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
4766 #export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
4767
4768 # Eiffel2Java stuff
4769 #export JAVA_HOME=/usr/lib/jvm/default
4770 #export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
4771 #export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4772 #export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4773
4774 #export PATH="$HOME/usr/build/pvs:$PATH"
4775 #export SBCLISP_HOME=/usr/share/sbcl-source
4776 #export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
4777
4778 export MOZ_USE_XINPUT2=1 # precise scrolling in firefox
4779
4780 #export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
4781 #export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
4782
4783 if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
4784 #+end_src
4785
4786 *** zshenv
4787 :PROPERTIES:
4788 :header-args+: :tangle ~/.zshenv
4789 :END:
4790
4791 #+begin_src sh
4792 # Ensure that a non-login, non-interactive shell has a defined environment.
4793 if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
4794 source "${ZDOTDIR:-$HOME}/.zprofile"
4795 fi
4796 #+end_src
4797
4798 *** zshrc
4799 :PROPERTIES:
4800 :header-args+: :tangle ~/.zshrc
4801 :END:
4802
4803 #+begin_src sh
4804 # Bash-like navigation
4805 #export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
4806 #export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
4807 export WORDCHARS='*?[]~=&;!#$%^(){}<>'
4808 #ZLE_SPACE_SUFFIX_CHARS=$'|&'
4809
4810 #disable -r time # disable shell reserved word
4811 #alias time='time -p' # -p for POSIX output
4812
4813 # rehash if last command was pacaur or pacman
4814 # (so that zsh picks up changes in $PATH immediately)
4815 TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
4816
4817 #
4818 # User configuration sourced by interactive shells
4819 #
4820
4821 # Change default zim location
4822 export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
4823
4824 # Start zim
4825 [[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
4826
4827 ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
4828 #ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
4829
4830 setopt globdots
4831
4832 source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
4833 source ~/.zsh/zsh-autopair/autopair.zsh
4834
4835
4836 ### fzf ###
4837
4838 source /usr/share/fzf/key-bindings.zsh
4839 source /usr/share/fzf/completion.zsh
4840
4841 # Accept history selection instead of putting it on
4842 # the command line
4843 fzf-history-widget-accept() {
4844 fzf-history-widget
4845 zle accept-line
4846 }
4847 #zle -N fzf-history-widget-accept
4848 #bindkey '^R' fzf-history-widget-accept
4849
4850 # alt+c preview
4851 export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
4852
4853 ### fzf ###
4854
4855
4856 # aliases
4857 alias mpv="mpv --ytdl-format mp4"
4858 alias mv="mv -iv"
4859 alias cp="cp -iv"
4860 alias scl=systemctl
4861 alias jcl=journalctl
4862 alias m="mbsync -Va; getmail; notmuch new"
4863 alias best="youtube-dl -f best"
4864 alias nixx="ssh amin@nix.aminb.org"
4865 alias fence="ssh aminb@fencepost.gnu.org"
4866
4867 aur() {
4868 cd ~/usr/build
4869 git clone https://aur.archlinux.org/${1}.git
4870 cd ${1}
4871 }
4872
4873 # i-beam cursor
4874 echo -e "\033[5 q"
4875 #echo -e "\033[6 q"
4876 #+end_src
4877
4878 * Scripts
4879
4880 This section contains various useful scripts and the ones used by the
4881 programs above. For instance, =toggle-tablet= for switching to and
4882 from tablet mode on my X220T, =toggle-presentation-mode= for toggling
4883 Xfce's presentation mode which keeps the screen awake, and
4884 =rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
4885 exact brightness value.
4886
4887 ** battery-percentage-time
4888 :PROPERTIES:
4889 :header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/sh"
4890 :END:
4891
4892 #+begin_src sh
4893 dbus_send() {
4894 label=$1
4895 dbus-send --print-reply=literal --system \
4896 --dest=org.freedesktop.UPower \
4897 /org/freedesktop/UPower/devices/battery_BAT0 \
4898 org.freedesktop.DBus.Properties.Get \
4899 string:org.freedesktop.UPower.Device \
4900 string:"${label}" | awk '{print $3}'
4901 }
4902
4903 perc=$(dbus_send 'Percentage')
4904 state=$(dbus_send 'State')
4905
4906 if [ "$state" -eq 2 ]; then # Discharging
4907 secs=$(dbus_send 'TimeToEmpty')
4908 elif [ "$state" -eq 1 ]; then # Charging
4909 secs=$(dbus_send 'TimeToFull')
4910 fi
4911
4912 printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60))
4913 #+end_src
4914
4915 ** rofi-light
4916 :PROPERTIES:
4917 :header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
4918 :END:
4919
4920 #+begin_src bash
4921 cur=$(light -G)
4922 val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 12)
4923 light -S $val
4924 #+end_src
4925
4926 ** s (run sway)
4927 :PROPERTIES:
4928 :header-args+: :tangle ~/.local/bin/s :shebang "#!/bin/bash"
4929 :END:
4930
4931 #+begin_src bash
4932 export _JAVA_AWT_WM_NONREPARENTING=1
4933 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4934 light -Scrs "intel_backlight" 2
4935 source $HOME/.zprofile
4936 sway
4937 #+end_src
4938
4939 ** sway-ws-util
4940 :PROPERTIES:
4941 :header-args+: :tangle ~/.local/bin/sway-ws-util :shebang "#!/bin/bash"
4942 :END:
4943
4944 #+begin_src bash
4945 curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name')
4946 [[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1))
4947 [[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1))
4948 dest_ws=-1
4949 op=-1
4950
4951 if [ "$1" = "switch" ] || [ "$1" = "move" ]; then
4952 op="$1"
4953 if [ "$2" = "prev" ]; then
4954 dest_ws="$prev_ws"
4955 elif [ "$2" = "next" ]; then
4956 dest_ws="$next_ws"
4957 else
4958 echo "Usage: $0 $1 {prev|next} [follow]"
4959 exit 1
4960 fi
4961 else
4962 echo "Usage: $0 {switch|move} {prev|next} [follow]"
4963 exit 1
4964 fi
4965
4966 if [ "$op" = "switch" ]; then
4967 sway workspace "$dest_ws"
4968 elif [ "$op" = "move" ]; then
4969 sway move container to workspace "$dest_ws"
4970 if [ "$3" = "follow" ]; then
4971 sway workspace "$dest_ws"
4972 fi
4973 fi
4974 #+end_src
4975
4976 ** toggle-layout
4977 :PROPERTIES:
4978 :header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
4979 :END:
4980
4981 #+begin_src bash
4982 lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
4983
4984 if [ "$lang" = "us" ]; then
4985 setxkbmap ir
4986 else
4987 setxkbmap us
4988 # xmodmap $HOME/.Xmodmap
4989 fi
4990 #+end_src
4991
4992 ** toggle-presentation-mode
4993 :PROPERTIES:
4994 :header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
4995 :END:
4996
4997 #+begin_src bash
4998 xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
4999 #+end_src
5000
5001 ** toggle-tablet
5002 :PROPERTIES:
5003 :header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
5004 :END:
5005
5006 This script toggles between a 'normal' mode and a 'tablet' mode, doing
5007 a few things:
5008
5009 - rotates the screen using =xrandr=, so that rotating the physical
5010 display of my X220t would have the laptop's battery on the right
5011 hand side,
5012 - enables touch screen,
5013 - properly rotates the stylus pen and touch screen pointers, and
5014 - toggles between RGB and Vertical BGR sub-pixel order.
5015
5016 #+begin_src bash
5017 case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
5018 0) # Screen is not rotated, we should rotate it right (90°)
5019 xrandr -o 3
5020 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
5021 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
5022 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
5023 xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
5024 ;;
5025 1) # Currently top is rotated right, we should set it normal (0°)
5026 xrandr -o 0
5027 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
5028 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
5029 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
5030 xfconf-query -c xsettings -p /Xft/RGBA -s rgb
5031 ;;
5032 *)
5033 echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
5034 exit 1
5035 ;;
5036 esac
5037 #+end_src
5038
5039 ** unlock-def-gk.py
5040 :PROPERTIES:
5041 :header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
5042 :END:
5043
5044 #+begin_src python
5045 import gnomekeyring as gk
5046 # list_item_ids_sync('login')[0] == 1L
5047 gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
5048 #+end_src
5049
5050 ** volume-info
5051 :PROPERTIES:
5052 :header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh"
5053 :END:
5054
5055 #+begin_src sh
5056 cur_vol=$(pamixer --get-volume)
5057
5058 if [ $(pamixer --get-mute) = true ]; then
5059 printf 'mt \n' "$cur_vol"
5060 else
5061 printf '%02d \n' "$cur_vol"
5062 fi
5063 #+end_src
5064
5065 ** wp
5066
5067 My little wallpaper changer script.
5068
5069 *** wp
5070 :PROPERTIES:
5071 :header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
5072 :END:
5073
5074 #+begin_src bash :tangle no
5075 export DISPLAY=:0
5076
5077 case "$1" in
5078 "day")
5079 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5080 ;;
5081 "night")
5082 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5083 ;;
5084 *)
5085 echo $"Usage: $0 {day|night}"
5086 exit 1
5087 esac
5088 #+end_src
5089
5090 *** wp-auto
5091 :PROPERTIES:
5092 :header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
5093 :END:
5094
5095 #+begin_src bash :tangle no
5096 SED=$(which sed)
5097 ROFI=$(which rofi)
5098
5099 export DISPLAY=:0
5100 HOUR=$(date +%H)
5101
5102 if [ -z "${SED}" ]
5103 then
5104 echo "Did not find 'sed', script cannot continue."
5105 exit 1
5106 fi
5107 if [ -z "${ROFI}" ]
5108 then
5109 echo "Did not find rofi, there is no point to continue."
5110 exit 1
5111 fi
5112
5113 ###
5114 # Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
5115 # Repeated calls should leave the config clean-ish
5116 ###
5117 function set_theme()
5118 {
5119 CDIR="${HOME}/.config/rofi/"
5120 if [ ! -d "${CDIR}" ]
5121 then
5122 mkdir -p ${CDIR}
5123 fi
5124 if [ -f "${CDIR}/config" ]
5125 then
5126 ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
5127 fi
5128 echo "rofi.theme: ${1}" >> "${CDIR}/config"
5129
5130 }
5131
5132 if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
5133 then
5134 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5135 xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
5136 set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
5137 else
5138 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5139 xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
5140 set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
5141 fi
5142 #+end_src
5143
5144 *** wp.service
5145 :PROPERTIES:
5146 :header-args+: :tangle ~/.config/systemd/user/wp.service
5147 :END:
5148
5149 #+begin_src conf :tangle no
5150 [Unit]
5151 Description=wallpaper service
5152
5153 [Service]
5154 Type=oneshot
5155 ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
5156 #+end_src
5157
5158 *** wp.timer
5159 :PROPERTIES:
5160 :header-args+: :tangle ~/.config/systemd/user/wp.timer
5161 :END:
5162
5163 #+begin_src conf :tangle no
5164 [Unit]
5165 [Unit]
5166 Description=wallpaper timer
5167
5168 [Timer]
5169 OnCalendar=07,21:00
5170 Unit=wp.service
5171 Persistent=true
5172
5173 [Install]
5174 WantedBy=timers.target
5175 #+end_src
5176
5177 ** zathura-sync.sh
5178 :PROPERTIES:
5179 :header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
5180 :END:
5181
5182 #+begin_src sh
5183 pos="$1"
5184 pdffile="$2"
5185 zathura --synctex-forward "$pos" "$pdffile" || \
5186 (
5187 zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
5188 sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
5189 #+end_src
5190 ** Fun :)
5191
5192 *** eat-em
5193 :PROPERTIES:
5194 :header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
5195 :END:
5196
5197 #+begin_src sh
5198 # Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5199 # [ESC] character in original post removed here.
5200
5201 # ANSI Color -- use these variables to easily have different color
5202 # and format output. Make sure to output the reset sequence after
5203 # colors (f = foreground, b = background), and use the 'off'
5204 # feature for anything you turn on.
5205
5206 initializeANSI()
5207 {
5208 esc="$(echo -en '\e')"
5209
5210 blackf="${esc}[30m"; redf="${esc}[31m"; greenf="${esc}[32m"
5211 yellowf="${esc}[33m" bluef="${esc}[34m"; purplef="${esc}[35m"
5212 cyanf="${esc}[36m"; whitef="${esc}[37m"
5213
5214 blackb="${esc}[40m"; redb="${esc}[41m"; greenb="${esc}[42m"
5215 yellowb="${esc}[43m" blueb="${esc}[44m"; purpleb="${esc}[45m"
5216 cyanb="${esc}[46m"; whiteb="${esc}[47m"
5217
5218 boldon="${esc}[1m"; boldoff="${esc}[22m"
5219 italicson="${esc}[3m"; italicsoff="${esc}[23m"
5220 ulon="${esc}[4m"; uloff="${esc}[24m"
5221 invon="${esc}[7m"; invoff="${esc}[27m"
5222
5223 reset="${esc}[0m"
5224 }
5225
5226 # note in this first use that switching colors doesn't require a reset
5227 # first - the new color overrides the old one.
5228
5229 #clear
5230
5231 initializeANSI
5232
5233 cat << EOF
5234
5235 ${yellowf} ▄███████▄${reset} ${redf} ▄██████▄${reset} ${greenf} ▄██████▄${reset} ${bluef} ▄██████▄${reset} ${purplef} ▄██████▄${reset} ${cyanf} ▄██████▄${reset}
5236 ${yellowf}▄█████████▀▀${reset} ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset} ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset} ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset} ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset} ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5237 ${yellowf}███████▀${reset} ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset} ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset} ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset} ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset} ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5238 ${yellowf}███████▄${reset} ${redf}████████████${reset} ${greenf}████████████${reset} ${bluef}████████████${reset} ${purplef}████████████${reset} ${cyanf}████████████${reset}
5239 ${yellowf}▀█████████▄▄${reset} ${redf}██▀██▀▀██▀██${reset} ${greenf}██▀██▀▀██▀██${reset} ${bluef}██▀██▀▀██▀██${reset} ${purplef}██▀██▀▀██▀██${reset} ${cyanf}██▀██▀▀██▀██${reset}
5240 ${yellowf} ▀███████▀${reset} ${redf}▀ ▀ ▀ ▀${reset} ${greenf}▀ ▀ ▀ ▀${reset} ${bluef}▀ ▀ ▀ ▀${reset} ${purplef}▀ ▀ ▀ ▀${reset} ${cyanf}▀ ▀ ▀ ▀${reset}
5241
5242 ${boldon}${yellowf} ▄███████▄ ${redf} ▄██████▄ ${greenf} ▄██████▄ ${bluef} ▄██████▄ ${purplef} ▄██████▄ ${cyanf} ▄██████▄${reset}
5243 ${boldon}${yellowf}▄█████████▀▀ ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄ ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄ ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄ ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄ ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5244 ${boldon}${yellowf}███████▀ ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███ ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███ ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███ ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███ ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5245 ${boldon}${yellowf}███████▄ ${redf}████████████ ${greenf}████████████ ${bluef}████████████ ${purplef}████████████ ${cyanf}████████████${reset}
5246 ${boldon}${yellowf}▀█████████▄▄ ${redf}██▀██▀▀██▀██ ${greenf}██▀██▀▀██▀██ ${bluef}██▀██▀▀██▀██ ${purplef}██▀██▀▀██▀██ ${cyanf}██▀██▀▀██▀██${reset}
5247 ${boldon}${yellowf} ▀███████▀ ${redf}▀ ▀ ▀ ▀ ${greenf}▀ ▀ ▀ ▀ ${bluef}▀ ▀ ▀ ▀ ${purplef}▀ ▀ ▀ ▀ ${cyanf}▀ ▀ ▀ ▀${reset}
5248
5249 EOF
5250 #+end_src
5251
5252 *** invade-em
5253 :PROPERTIES:
5254 :header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
5255 :END:
5256
5257 #+begin_src bash
5258 #
5259 # ANSI color scheme script featuring Space Invaders
5260 #
5261 # Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5262 # Modified by lolilolicon
5263 #
5264
5265 f=3 b=4
5266 for j in f b; do
5267 for i in {0..7}; do
5268 printf -v $j$i %b "\e[${!j}${i}m"
5269 done
5270 done
5271 bld=$'\e[1m'
5272 rst=$'\e[0m'
5273
5274 cat << EOF
5275
5276 $f1 ▀▄ ▄▀ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4 ▀▄ ▄▀ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
5277 $f1 ▄█▀███▀█▄ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4 ▄█▀███▀█▄ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
5278 $f1█▀███████▀█ $f2▀▀███▀▀███▀▀ $f3▀█▀██▀█▀ $f4█▀███████▀█ $f5▀▀███▀▀███▀▀ $f6▀█▀██▀█▀$rst
5279 $f1▀ ▀▄▄ ▄▄▀ ▀ $f2 ▀█▄ ▀▀ ▄█▀ $f3▀▄ ▄▀ $f4▀ ▀▄▄ ▄▄▀ ▀ $f5 ▀█▄ ▀▀ ▄█▀ $f6▀▄ ▄▀$rst
5280
5281 $bld$f1▄ ▀▄ ▄▀ ▄ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4▄ ▀▄ ▄▀ ▄ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
5282 $bld$f1█▄█▀███▀█▄█ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4█▄█▀███▀█▄█ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
5283 $bld$f1▀█████████▀ $f2▀▀▀██▀▀██▀▀▀ $f3▀▀█▀▀█▀▀ $f4▀█████████▀ $f5▀▀▀██▀▀██▀▀▀ $f6▀▀█▀▀█▀▀$rst
5284 $bld$f1 ▄▀ ▀▄ $f2▄▄▀▀ ▀▀ ▀▀▄▄ $f3▄▀▄▀▀▄▀▄ $f4 ▄▀ ▀▄ $f5▄▄▀▀ ▀▀ ▀▀▄▄ $f6▄▀▄▀▀▄▀▄$rst
5285
5286
5287 $f7▌$rst
5288
5289 $f7▌$rst
5290
5291 $f7 ▄█▄ $rst
5292 $f7▄█████████▄$rst
5293 $f7▀▀▀▀▀▀▀▀▀▀▀$rst
5294
5295 EOF
5296 #+end_src