git.shemshak.org - ~bandali/configs/blob - rc.org

   1 #+title: rc.org
   2 #+property: header-args :comments link :mkdirp yes :results silent
   3
   4 * About
   5
   6 This org file contains the configuration files of pretty much every
   7 program I use. The files are tangled (i.e. exported, or derived) from
   8 this file using =org-babel=.
   9
  10 Note: This file is best viewed inside Emacs with org mode.
  11
  12 * Configs
  13
  14 This section contains the configuration files (dotfiles) of various
  15 programs I use.
  16
  17 ** compton
  18 :PROPERTIES:
  19 :header-args+: :tangle ~/.config/compton.conf
  20 :END:
  21
  22 #+begin_src conf :tangle no
  23 # Shadow
  24 shadow = false;                 # Enabled client-side shadows on windows.
  25 no-dock-shadow = true;          # Avoid drawing shadows on dock/panel windows.
  26 no-dnd-shadow = true;           # Don't draw shadows on DND windows.
  27 clear-shadow = true;            # Zero the part of the shadow's mask behind the
  28                                 # window. Fix some weirdness with ARGB windows.
  29 shadow-radius = 5;              # The blur radius for shadows. (default 12)
  30 shadow-offset-x = -5;           # The left offset for shadows. (default -15)
  31 shadow-offset-y = -5;           # The top offset for shadows. (default -15)
  32 # shadow-opacity = 0.7;         # The translucency for shadows. (default .75)
  33 # shadow-red = 0.0;             # Red color value of shadow. (0.0 - 1.0, defaults to 0)
  34 # shadow-green = 0.0;           # Green color value of shadow. (0.0 - 1.0, defaults to 0)
  35 # shadow-blue = 0.0;            # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
  36 shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ];    # Exclude conditions for shadows.
  37 # shadow-exclude = "n:e:Notification";
  38 #shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
  39 shadow-ignore-shaped = true;    # Avoid drawing shadow on all shaped windows
  40                                 # (see also: --detect-rounded-corners)
  41
  42 # Opacity
  43 menu-opacity = 1.0;                     # The opacity for menus. (default 1.0)
  44 #inactive-opacity = 0.9;                        # Default opacity of inactive windows. (0.0 - 1.0)
  45 # active-opacity = 0.8;                 # Default opacity for active windows. (0.0 - 1.0)
  46 frame-opacity = 1.0;                    # Opacity of window titlebars and borders. (0.1 - 1.0)
  47 # inactive-opacity-override = true;     # Let inactive opacity set by 'inactive-opacity' overrides
  48                                         # value of _NET_WM_OPACITY. Bad choice.
  49 alpha-step = 0.06;                      # XRender backend: Step size for alpha pictures. Increasing
  50                                         # it may result in less X resource usage,
  51                                         # Yet fading may look bad.
  52 #inactive-dim = 0.5;                    # Dim inactive windows. (0.0 - 1.0)
  53 #inactive-dim-fixed = true;             # Do not let dimness adjust based on window opacity.
  54 # blur-background = true;               # Blur background of transparent windows.
  55                                         # Bad performance with X Render backend.
  56                                         # GLX backend is preferred.
  57 # blur-background-frame = true;         # Blur background of opaque windows with transparent
  58                                         # frames as well.
  59 blur-background-fixed = true;           # Do not let blur radius adjust based on window opacity.
  60 blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
  61                                         # Exclude conditions for background blur.
  62
  63 # Fading
  64 fading = false;                 # Fade windows during opacity changes.
  65 fade-delta = 3;         # The time between steps in a fade in milliseconds. (default 10).
  66 fade-in-step = 0.03;            # Opacity change between steps while fading in. (default 0.028).
  67 fade-out-step = 0.03;           # Opacity change between steps while fading out. (default 0.03).
  68 # no-fading-openclose = true;   # Avoid fade windows in/out when opening/closing.
  69 fade-exclude = [ ];             # Exclude conditions for fading.
  70
  71 # Other
  72 backend = "glx"                 # Backend to use: "xrender" or "glx". GLX backend is typically
  73                                 # much faster but depends on a sane driver.
  74 mark-wmwin-focused = true;      # Try to detect WM windows and mark them as active.
  75 mark-ovredir-focused = true;    # Mark all non-WM but override-redirect windows active (e.g. menus).
  76 use-ewmh-active-win = true;     # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
  77                                 # instead of using FocusIn/Out events. Usually more reliable but
  78                                 # depends on a EWMH-compliant WM.
  79 detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
  80 detect-client-opacity = true;   # Detect _NET_WM_OPACITY on client windows, useful for window
  81                                 # managers not passing _NET_WM_OPACITY of client windows to frame
  82                                 # windows.
  83 refresh-rate = 0;               # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
  84 vsync = "drm";                  # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
  85                                 # See man page for more details.
  86 dbe = false;                    # Enable DBE painting mode. Rarely needed.
  87 paint-on-overlay = true;        # Painting on X Composite overlay window. Recommended.
  88 sw-opti = false;                # Limit compton to repaint at most once every 1 / refresh_rate.
  89                                 # Incompatible with certain VSync methods.
  90 unredir-if-possible = false;    # Unredirect all windows if a full-screen opaque window is
  91                                 # detected, to maximize performance for full-screen windows.
  92 focus-exclude = [ ];            # A list of conditions of windows that should always be considered
  93                                 # focused.
  94 detect-transient = true;        # Use WM_TRANSIENT_FOR to group windows, and consider windows in
  95                                 # the same group focused at the same time.
  96 detect-client-leader = true;    # Use WM_CLIENT_LEADER to group windows.
  97 invert-color-include = [ ];     # Conditions for windows to be painted with inverted color.
  98
  99 # GLX backend                   # GLX backend fine-tune options. See man page for more info.
 100 glx-no-stencil = true;          # Recommended.
 101 glx-copy-from-front = false;    # Useful with --glx-swap-method,
 102 # glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
 103 # glx-no-rebind-pixmap = true;  # Recommended if it works.
 104 glx-no-rebind-pixmap = true;    # Recommended if it works.
 105 #glx-swap-method = "4"; # See man page.
 106 glx-swap-method = "4";  # See man page.
 107
 108 # Window type settings
 109 wintypes:
 110 {
 111   tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
 112   menu = { shadow = false; };
 113   dropdown_menu = { shadow = false; };
 114   popup_menu =  { shadow = false; };
 115   utility =  { shadow = false; };
 116   # fade: Fade the particular type of windows.
 117   # shadow: Give those windows shadow
 118   # opacity: Default opacity for the type of windows.
 119   # focus: Whether to always consider windows of this type focused.
 120 };
 121 #+end_src
 122
 123 ** dovecot
 124 :PROPERTIES:
 125 :header-args+: :tangle "/sudo::/etc/dovecot/dovecot.conf"
 126 :END:
 127
 128 #+begin_src conf
 129 protocols = imap
 130
 131 listen = 127.0.0.1
 132 log_path = /var/log/dovecot.log
 133 info_log_path = /var/log/dovecot-info.log
 134
 135 ssl = no
 136 disable_plaintext_auth = no
 137
 138 auth_verbose = yes
 139 auth_mechanisms = plain
 140
 141 passdb {
 142   driver = passwd-file
 143   args = /etc/dovecot/passwd
 144 }
 145
 146 userdb {
 147   driver = static
 148   args = uid=amin gid=amin home=/home/amin/mail/%d/%n
 149   default_fields = mail=maildir:/home/amin/mail/%d/%n/mail
 150 }
 151
 152 # mail_home = /home/amin/mail/%d/%n
 153 # mail_location = maildir:/home/amin/mail/%d/%n/mail:LAYOUT=fs:INBOX=/home/amin/mail/%d/%n/mail/Inbox
 154
 155 # namespace {
 156 #   inbox = yes
 157 #   separator = /
 158 # }
 159
 160 mail_plugins = $mail_plugins fts fts_lucene
 161
 162 plugin {
 163   fts = lucene
 164   fts_lucene = whitespace_chars=@.
 165   fts_autoindex = yes
 166 }
 167 #+end_src
 168
 169 ** Dunst
 170 :PROPERTIES:
 171 :header-args+: :tangle ~/.config/dunst/dunstrc
 172 :END:
 173
 174 #+begin_src conf
 175 [global]
 176 #font = Ubuntu Mono 10.5
 177 font = Inconsolata 11
 178
 179 # Path to default icons.
 180 icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
 181
 182 icon_position = left
 183 # <b>bold</b>
 184 # <i>italic</i>
 185 # <s>strikethrough<s/>
 186 # <u>underline</u>
 187 markup = full
 188 # The format of the message. Possible variables are:
 189 #   %a  appname
 190 #   %s  summary
 191 #   %b  body
 192 #   %i  iconname (including its path)
 193 #   %I  iconname (without its path)
 194 #   %p  progress value if set ([  0%] to [100%]) or nothing
 195 # Markup is allowed
 196 format = "<b>%s</b>\n%b"
 197 # Sort messages by urgency
 198 sort = yes
 199 # Show how many messages are currently hidden (because of geometry)
 200 indicate_hiddenl= no
 201 # Alignment of message text.
 202 # Possible values are "left", "center" and "right"
 203 alignment = center
 204 # The frequency with wich text that is longer than the notification
 205 # window allows bounces back and forth.
 206 # This option conflicts with 'word_wrap'.
 207 # Set to 0 to disable
 208 bounce_freq = 3
 209 # show age of message if message is older than show_age_threshold seconds.
 210 # set to -1 to disable
 211 show_age_threshold = -1
 212 # split notifications into multiple lines if they don't fit into geometry
 213 word_wrap = yes
 214 # ignore newlines '\n' in notifications
 215 ignore_newline = no
 216 # The geometry of the message window.
 217 # geometry [{width}]x{height}][+/-{x}+/-{y}]
 218 # The height is measured in number of notifications everything else in pixels. If the width
 219 # is omitted but the height is given ("-geometry x2"), the message window
 220 # expands over the whole screen (dmenu-like). If width is 0,
 221 # the window expands to the longest message displayed.
 222 # A positive x is measured from the left, a negative from the
 223 # right side of the screen.  Y is measured from the top and down respectevly.
 224 # The width can be negative. In this case the actual width is the
 225 # screen width minus the width defined in within the geometry option.
 226 #geometry = "410x12-12+12"
 227 #geometry = "0x0-30-30"
 228 geometry = "260x12-30-30"
 229 # The transparency of the window. range: [0; 100]
 230 # This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
 231 transparency = 0
 232 # Don't remove messages, if the user is idle (no mouse or keyboard input)
 233 # for longer than idle_threshold seconds.
 234 # Set to 0 to disable.
 235 idle_threshold = 120
 236 # Which monitor should the notifications be displayed on.
 237 monitor = 0
 238 # Display notification on focused monitor. Possible modes are:
 239 # mouse: follow mouse pointer
 240 # keyboard: follow window with keyboard focus
 241 # none: don't follow anything
 242 #
 243 # "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
 244 # This should be the case for almost all modern windowmanagers.
 245 #
 246 # If this option is set to mouse or keyboard, the monitor option will be
 247 # ignored.
 248 follow = keyboard
 249 # should a notification popped up from history be sticky or
 250 # timeout as if it would normally do.
 251 sticky_history = yes
 252 # The height of a single line. If the height is smaller than the font height,
 253 # it will get raised to the font height.
 254 # This adds empty space above and under the text.
 255 line_height = 0
 256
 257 show_indicators = yes
 258
 259 # Draw a line of 'separatpr_height' pixel height between two notifications.
 260 # Set to 0 to disable
 261 separator_height = 3
 262 # padding between text and separator
 263 padding = 8
 264 # horizontal padding
 265 horizontal_padding = 8
 266 # Define a color for the separator.
 267 # possible values are:
 268 #  * auto: dunst tries to find a color fitting to the background
 269 #  * foreground: use the same color as the foreground
 270 #  * frame: use the same color as the frame.
 271 #  * anything else will be interpreted as a X color
 272 separator_color = foreground
 273 # print a notification on startup
 274 # This is mainly for error detection, since dbus (re-)starts dunst
 275 # automatically after a crash.
 276 startup_notification = false
 277 # dmenu path
 278 #dmenu = /usr/bin/dmenu -p dunst:
 279 dmenu = /usr/bin/rofi -dmenu -p dunst:
 280 # browser for opening urls in context menu
 281 browser = /usr/bin/firefox -new-tab
 282 [frame]
 283 width = 0
 284 color = "#377222"
 285 [shortcuts]
 286 # shortcuts are specified as [modifier+][modifier+]...key
 287 # available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
 288 # and 'mod4' (windows-key)
 289 # xev might be helpful to find names for keys
 290 # close notification
 291 close = ctrl+space
 292 # close all notifications
 293 close_all = ctrl+shift+space
 294 # redisplay last message(s)
 295 # On the US keyboard layout 'grave' is normally above TAB and left of '1'.
 296 history = ctrl+shift+h
 297 # context menu
 298 context = ctrl+shift+period
 299 [urgency_low]
 300 # IMPORTANT: colors have to be defined in quotation marks.
 301 # Otherwise the '#' and following  would be interpreted as a comment.
 302 background = "#1d2a30"
 303 foreground = "#71c2af"
 304 timeout = 3
 305 [urgency_normal]
 306 background = "#1d2a30"
 307 foreground = "#71c2af"
 308 timeout = 0
 309 [urgency_critical]
 310 background = "#1d2a30"
 311 foreground = "#ff9982"
 312 timeout = 0
 313
 314 # Every section that isn't one of the above is interpreted as a rules
 315 # to override settings for certain messages.
 316 # Messages can be matched by 'appname', 'summary', 'body' or 'icon'
 317 # and you can override the 'timeout', 'urgency', 'foreground', 'background'
 318 # and 'format'.
 319 # Shell-like globbing will get expanded.
 320 #
 321 # SCRIPTING
 322 # you can specify a script that gets run when the rule matches by setting
 323 # the 'script' option.
 324 # The script will be called as follows:
 325 # script appname summary body icon urgency
 326 # where urgency can be "LOW", "NORMAL" or "CRITICAL".
 327 #
 328 # NOTE: if you don't want a notification to be displayed, set the format to ""
 329 # NOTE: It might be helpful to run dunst -print in a terminal in order to find
 330 # fitting options for rules.
 331 #[espeak]
 332 #    summary = "*"
 333 #    script = dunst_espeak.sh
 334 #[script-test]
 335 #    summary = "*script*"
 336 #    script = dunst_test.sh
 337 #[ignore]
 338 ## This notification will not be displayed
 339 #    summary = "foobar"
 340 #    format = ""
 341 #[signed_on]
 342 #    appname = Pidgin
 343 #    summary = "*signed on*"
 344 #    urgency = low
 345 #
 346 #[signed_off]
 347 #    appname = Pidgin
 348 #    summary = *signed off*
 349 #    urgency = low
 350 #
 351 #[says]
 352 #    appname = Pidgin
 353 #    summary = *says*
 354 #    urgency = critical
 355 #
 356 #[twitter]
 357 #    appname = Pidgin
 358 #    summary = *twitter.com*
 359 #    urgency = normal
 360 #
 361 [xfpm-backlight]
 362     summary = *Brightness*
 363     urgency = low
 364 #+end_src
 365
 366 ** Fontconfig
 367 :PROPERTIES:
 368 :header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
 369 :END:
 370
 371 #+begin_src xml
 372 <?xml version="1.0"?>
 373 <!DOCTYPE fontconfig SYSTEM "fonts.dtd">
 374 <fontconfig>
 375  <match target="font">
 376   <edit mode="assign" name="rgba">
 377    <const>rgb</const>
 378   </edit>
 379  </match>
 380  <match target="font">
 381   <edit mode="assign" name="hinting">
 382    <bool>true</bool>
 383   </edit>
 384  </match>
 385  <match target="font">
 386   <edit mode="assign" name="hintstyle">
 387    <const>hintslight</const>
 388   </edit>
 389  </match>
 390  <match target="font">
 391   <edit mode="assign" name="antialias">
 392    <bool>true</bool>
 393   </edit>
 394  </match>
 395  <match target="font">
 396   <edit mode="assign" name="lcdfilter">
 397    <const>lcddefault</const>
 398   </edit>
 399  </match>
 400  <dir>~/.fonts</dir>
 401
 402  <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
 403  <alias binding="same">
 404   <family>Helvetica</family>
 405   <prefer>
 406    <family>Liberation Sans</family>
 407   </prefer>
 408 </alias>
 409 </fontconfig>
 410 #+end_src
 411
 412 ** getmail
 413
 414 *** getmailrc
 415 :PROPERTIES:
 416 :header-args+: :tangle ~/.getmail/getmailrc
 417 :END:
 418
 419 #+begin_src conf
 420 [retriever]
 421 type = SimplePOP3SSLRetriever
 422 server = fencepost.gnu.org
 423 username = bandali
 424 password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
 425 port = 995
 426 use_apop = True
 427
 428 [destination]
 429 type = Maildir
 430 path = ~/mail/gnu/Inbox/
 431
 432 # [destination]
 433 # type = MDA_external
 434 # path = /usr/lib/dovecot/deliver
 435 # arguments = ('-d', 'amin@aminb.org')
 436
 437 [options]
 438 delete = True
 439 #+end_src
 440
 441 *** getmail.service
 442 :PROPERTIES:
 443 :header-args+: :tangle ~/.config/systemd/user/getmail.service
 444 :END:
 445
 446 #+begin_src conf :tangle no
 447 [Unit]
 448 Description=getmail service
 449
 450 [Service]
 451 Type=oneshot
 452 ExecStart=/usr/bin/getmail
 453 StandardOutput=syslog
 454 StandardError=syslog
 455 #+end_src
 456
 457 *** getmail.timer
 458 :PROPERTIES:
 459 :header-args+: :tangle ~/.config/systemd/user/getmail.timer
 460 :END:
 461
 462 #+begin_src conf :tangle no
 463 [Unit]
 464 Description=getmail timer
 465
 466 [Timer]
 467 OnCalendar=*:0/30
 468 Persistent=true
 469 Unit=getmail.service
 470
 471 [Install]
 472 WantedBy=timers.target
 473 #+end_src
 474
 475 ** Git
 476
 477 *** gitconfig
 478 :PROPERTIES:
 479 :header-args+: :tangle ~/.gitconfig
 480 :END:
 481
 482 **** user
 483 #+begin_src conf
 484 [user]
 485     name = Amin Bandali
 486     email = bandali@gnu.org
 487     signingkey = BE6273738E616D6D1B3A08E8A21A020248816103
 488 #+end_src
 489
 490 **** signing
 491 #+begin_src conf
 492 [commit]
 493     gpgsign = true
 494 # [format]
 495 #     signoff = true
 496 #+end_src
 497
 498 **** core
 499 #+begin_src conf
 500 [core]
 501     autocrlf = input  # CRLF -> LF on commit
 502     editor = emacsclient -t
 503     excludesfile = ~/.gitignore_global
 504     pager = "less"
 505 #+end_src
 506
 507 **** gpg
 508 #+begin_src conf
 509 [gpg]
 510     program = gpg2
 511 #+end_src
 512
 513 **** alias
 514 #+begin_src conf
 515 [alias]
 516     git = !exec git  # handle nested git calls, e.g. git git status
 517     aliases = config --get-regexp '^alias\\.'
 518     a = add
 519     s = status
 520     sl = status --long
 521     c = checkout
 522     cb = checkout -b
 523     b = branch
 524     r = rebase
 525     p = pull
 526     pr = pull --rebase
 527     ps = push
 528     psf = push --force
 529     nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f"
 530     nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f"
 531 #+end_src
 532
 533 **** color
 534 #+begin_src conf
 535 [color]
 536     ui = auto
 537 [color "status"]
 538     added = green bold
 539     changed = red bold
 540     untracked = red bold
 541 [color "branch"]
 542     current = green bold
 543     remote = magenta bold
 544 [color "diff"]
 545     new = green bold
 546     old = red bold
 547 #+end_src
 548
 549 **** status
 550 #+begin_src conf
 551 [status]
 552     # showUntrackedFiles = all
 553     short=true
 554     branch=true
 555 #+end_src
 556
 557 **** github
 558 #+begin_src conf
 559 [github]
 560         user = aminb
 561 #+end_src
 562
 563 **** send-email
 564 #+begin_src conf
 565 [sendemail]
 566         smtpuser = bandali
 567         smtpserver = fencepost.gnu.org
 568         smtpserverport = 587
 569         smtpencryption = tls
 570         annotate = yes
 571 #+end_src
 572
 573 *** gitignore
 574 :PROPERTIES:
 575 :header-args+: :tangle ~/.gitignore_global
 576 :END:
 577
 578 #+begin_src conf
 579 *.orig
 580 *.py[co]
 581 *.sublime-workspace
 582 *~
 583 .DS_Store
 584 *.elc
 585 *-autoloads.el
 586 #+end_src
 587
 588 ** GnuPG
 589 :PROPERTIES:
 590 :header-args+: :tangle ~/.gnupg/gpg-agent.conf
 591 :END:
 592
 593 #+begin_src conf
 594 default-cache-ttl 43200
 595 max-cache-ttl 43200
 596
 597 default-cache-ttl-ssh 10800
 598 max-cache-ttl-ssh 10800
 599
 600 # pinentry-program /usr/bin/pinentry-qt
 601 #+end_src
 602
 603 ** GTK
 604
 605 *** gtk-2.0
 606 :PROPERTIES:
 607 :header-args+: :tangle ~/.gtkrc-2.0
 608 :END:
 609
 610 #+begin_src conf
 611 gtk-theme-name="Greybird"
 612 gtk-icon-theme-name="Paper"
 613 gtk-font-name="Ubuntu 10"
 614 gtk-menu-images=0
 615 # gtk-key-theme-name = "Emacs"
 616 #+end_src
 617
 618 *** gtk-3.0
 619 :PROPERTIES:
 620 :header-args+: :tangle ~/.config/gtk-3.0/settings.ini
 621 :END:
 622
 623 #+begin_src conf :tangle no
 624 [Settings]
 625 gtk-icon-theme-name = Paper
 626 # gtk-theme-name = Adwaita
 627
 628 gtk-theme-name = Greybird
 629 # gtk-theme-name = Arc-Darker
 630 # gtk-theme-name = Numix-ArchBlue
 631
 632 gtk-font-name = Ubuntu 10
 633 # gtk-key-theme-name = Emacs
 634 #+end_src
 635
 636 ** [[https://github.com/Leinnan/i3gs][i3gs]]
 637 :PROPERTIES:
 638 :header-args+: :tangle ~/.config/i3gs/config
 639 :END:
 640
 641 #+begin_src conf :comments none :tangle no
 642 borders_width=0 0 2 0
 643 separator_width=10
 644
 645 #[mpd]
 646 #preset=MPD
 647 #title=<span weight='heavy' fgcolor='#7FDBFF'> </span>
 648 #borders_color=#7FDBFF
 649
 650 [ram]
 651 preset=RAM
 652 title=<span weight='heavy' fgcolor='#3D9970'> </span>
 653 borders_color=#3D9970
 654
 655 #[cpu]
 656 #preset=CPU
 657 #title=<span weight='heavy' fgcolor='#2ECC40'> </span>
 658 #borders_color=#2ECC40
 659
 660 #[hdd]
 661 #preset=HDD
 662 #title=<span weight='heavy' fgcolor='#01FF70'> </span>
 663 #borders_color=#01FF70
 664
 665 [volume]
 666 command=volume-info
 667 title=<span weight='heavy' fgcolor='#7FDBFF'></span>
 668 borders_color=#7FDBFF
 669
 670 [battery]
 671 preset=BAT
 672 command=battery-percentage-time
 673 title=<span weight='heavy' fgcolor='#39CCCC'> </span>
 674 borders_color=#39CCCC
 675
 676 [wifi]
 677 preset=WIFI
 678 title=<span weight='heavy' fgcolor='#01FF70'> </span>
 679 borders_color=#01FF70
 680
 681 [date]
 682 preset=DATE
 683 command=date '+%-I:%M, %a %b %d '
 684 title=<span weight='heavy' fgcolor='#FFDC00'> </span>
 685 borders_color=#FFDC00
 686 separator_width=0
 687 #+end_src
 688
 689 ** i3status
 690 :PROPERTIES:
 691 :header-args+: :tangle ~/.config/i3status/config
 692 :END:
 693
 694 #+begin_src conf :comments none
 695 # i3status configuration file.
 696 # see "man i3status" for documentation.
 697
 698 # It is important that this file is edited as UTF-8.
 699 # The following line should contain a sharp s:
 700 # ß
 701 # If the above line is not correctly displayed, fix your editor first!
 702
 703 general {
 704         colors = true
 705         interval = 5
 706         output_format = "i3bar"
 707 }
 708
 709 # order += "ipv6"
 710 order += "disk /"
 711 order += "disk /data"
 712 # order += "wireless _first_"
 713 order += "ethernet _first_"
 714 order += "battery 0"
 715 order += "volume master"
 716 order += "load"
 717 order += "tztime local"
 718
 719 wireless _first_ {
 720         format_up = "W:%quality %essid %ip"
 721         format_down = "W: down"
 722 }
 723
 724 ethernet _first_ {
 725         # if you use %speed, i3status requires root privileges
 726         format_up = "E: %ip (%speed)"
 727         format_down = "E: down"
 728 }
 729
 730 battery 0 {
 731         format = "%status %percentage %remaining (%consumption)"
 732         path = "/sys/class/power_supply/BAT%d/uevent"
 733         low_threshold = "10"
 734         threshold_type = "percentage"
 735         last_full_capacity = true
 736         integer_battery_capacity = true
 737         hide_seconds = true
 738 }
 739
 740 tztime local {
 741         format = "%-I:%M%P %a %b %d"
 742 }
 743
 744 volume master {
 745         format = "♪ %volume"
 746         format_muted = "🔇 %volume"
 747         device = "pulse"
 748 }
 749
 750 load {
 751         format = "%1min"
 752 }
 753
 754 disk "/" {
 755         format = "/ %avail"
 756 }
 757
 758 disk "/data" {
 759         format = "/data %avail"
 760 }
 761 #+end_src
 762
 763 ** isync
 764
 765 *** mbsyncrc
 766 :PROPERTIES:
 767 :header-args+: :tangle ~/.mbsyncrc
 768 :END:
 769
 770 #+begin_src conf
 771 # Global defaults
 772 CopyArrivalDate yes
 773 Create Both
 774 Expunge Both
 775
 776 ######
 777 IMAPAccount amin
 778 Host mail.aminb.org
 779 User amin@aminb.org
 780 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
 781 SSLType IMAPS
 782
 783 IMAPStore amin-remote
 784 Account amin
 785
 786 IMAPAccount amin-dovecot
 787 Host 127.0.0.1
 788 Port 143
 789 User amin@aminb.org
 790 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin-dovecot.gpg"
 791 SSLType None
 792
 793 IMAPStore amin-local
 794 Account amin-dovecot
 795
 796 Channel amin
 797 Master :amin-remote:
 798 Slave :amin-local:
 799 Patterns *
 800
 801 ######
 802 IMAPAccount uwaterloo
 803 Host connect.uwaterloo.ca
 804 User abandali
 805 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
 806 SSLType IMAPS
 807
 808 IMAPStore uwaterloo-remote
 809 Account uwaterloo
 810
 811 IMAPAccount uwaterloo-dovecot
 812 Host 127.0.0.1
 813 Port 143
 814 User abandali@uwaterloo.ca
 815 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo-dovecot.gpg"
 816 SSLType None
 817
 818 IMAPStore uwaterloo-local
 819 Account uwaterloo-dovecot
 820
 821 Channel uwaterloo
 822 Master :uwaterloo-remote:
 823 Slave :uwaterloo-local:
 824 Patterns *
 825 #+end_src
 826
 827 *** mbsync.service
 828 :PROPERTIES:
 829 :header-args+: :tangle ~/.config/systemd/user/mbsync.service
 830 :END:
 831
 832 #+begin_src conf :tangle no
 833 [Unit]
 834 Description=mbsync service
 835
 836 [Service]
 837 Type=oneshot
 838 ExecStart=/usr/bin/mbsync -Va
 839 StandardOutput=syslog
 840 StandardError=syslog
 841 #+end_src
 842
 843 *** mbsync.timer
 844 :PROPERTIES:
 845 :header-args+: :tangle ~/.config/systemd/user/mbsync.timer
 846 :END:
 847
 848 #+begin_src conf :tangle no
 849 [Unit]
 850 Description=mbsync timer
 851
 852 [Timer]
 853 OnCalendar=*:0/15
 854 Persistent=true
 855 Unit=mbsync.service
 856
 857 [Install]
 858 WantedBy=timers.target
 859 #+end_src
 860
 861 ** Latexmk
 862 :PROPERTIES:
 863 :header-args+: :tangle ~/.latexmkrc
 864 :END:
 865
 866 #+begin_src conf
 867 $pdf_previewer = "start zathura %O %S";
 868 $clean_ext = "aux out";
 869
 870 # $pdf_update_method = 4;
 871 # $pdf_update_command = "zathura %O %S";
 872
 873 # Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
 874 # by Ctrl+click in the PDF.
 875 # Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
 876 # editor.
 877 # $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
 878 #+end_src
 879
 880 ** libinput
 881
 882 Improve XPS 15 9560's touchpad experience.
 883
 884 # begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
 885 #+begin_src conf :tangle no
 886 Section "InputClass"
 887     Identifier "libinput touchpad catchall"
 888     Driver "libinput"
 889     MatchIsTouchpad "on"
 890     Option "ClickMethod" "clickfinger"
 891     Option "NaturalScrolling" "true"
 892     Option "Tapping" "on"
 893     Option "TappingButtonMap" "lrm"
 894 EndSection
 895 #+end_src
 896
 897 ** mkinitcpio
 898
 899 #+begin_src conf :tangle /sudo::/etc/mkinitcpio.conf :comments none
 900 # vim:set ft=sh
 901 # MODULES
 902 # The following modules are loaded before any boot hooks are
 903 # run.  Advanced users may wish to specify all system modules
 904 # in this array.  For instance:
 905 #     MODULES=(piix ide_disk reiserfs)
 906 MODULES=(i915)
 907
 908 # BINARIES
 909 # This setting includes any additional binaries a given user may
 910 # wish into the CPIO image.  This is run last, so it may be used to
 911 # override the actual binaries included by a given hook
 912 # BINARIES are dependency parsed, so you may safely ignore libraries
 913 BINARIES=()
 914
 915 # FILES
 916 # This setting is similar to BINARIES above, however, files are added
 917 # as-is and are not parsed in any way.  This is useful for config files.
 918 FILES=()
 919
 920 # HOOKS
 921 # This is the most important setting in this file.  The HOOKS control the
 922 # modules and scripts added to the image, and what happens at boot time.
 923 # Order is important, and it is recommended that you do not change the
 924 # order in which HOOKS are added.  Run 'mkinitcpio -H <hook name>' for
 925 # help on a given hook.
 926 # 'base' is _required_ unless you know precisely what you are doing.
 927 # 'udev' is _required_ in order to automatically load modules
 928 # 'filesystems' is _required_ unless you specify your fs modules in MODULES
 929 # Examples:
 930 ##   This setup specifies all modules in the MODULES setting above.
 931 ##   No raid, lvm2, or encrypted root is needed.
 932 #    HOOKS=(base)
 933 #
 934 ##   This setup will autodetect all modules for your system and should
 935 ##   work as a sane default
 936 #    HOOKS=(base udev autodetect block filesystems)
 937 #
 938 ##   This setup will generate a 'full' image which supports most systems.
 939 ##   No autodetection is done.
 940 #    HOOKS=(base udev block filesystems)
 941 #
 942 ##   This setup assembles a pata mdadm array with an encrypted root FS.
 943 ##   Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
 944 #    HOOKS=(base udev block mdadm encrypt filesystems)
 945 #
 946 ##   This setup loads an lvm2 volume group on a usb device.
 947 #    HOOKS=(base udev block lvm2 filesystems)
 948 #
 949 ##   NOTE: If you have /usr on a separate partition, you MUST include the
 950 #    usr, fsck and shutdown hooks.
 951 HOOKS=(base udev autodetect modconf block keyboard encrypt lvm2 resume filesystems fsck)
 952
 953 # COMPRESSION
 954 # Use this to compress the initramfs image. By default, gzip compression
 955 # is used. Use 'cat' to create an uncompressed image.
 956 #COMPRESSION="gzip"
 957 #COMPRESSION="bzip2"
 958 #COMPRESSION="lzma"
 959 #COMPRESSION="xz"
 960 #COMPRESSION="lzop"
 961 #COMPRESSION="lz4"
 962
 963 # COMPRESSION_OPTIONS
 964 # Additional options for the compressor
 965 #COMPRESSION_OPTIONS=()
 966 #+end_src
 967
 968 ** mpd
 969 :PROPERTIES:
 970 :header-args+: :tangle ~/.config/mpd/mpd.conf
 971 :END:
 972
 973 #+begin_src conf
 974 # An example configuration file for MPD.
 975 # Read the user manual for documentation: http://www.musicpd.org/doc/user/
 976
 977
 978 # Files and directories #######################################################
 979 #
 980 # This setting controls the top directory which MPD will search to discover the
 981 # available audio files and add them to the daemon's online database. This
 982 # setting defaults to the XDG directory, otherwise the music directory will be
 983 # be disabled and audio files will only be accepted over ipc socket (using
 984 # file:// protocol) or streaming files over an accepted protocol.
 985 #
 986 music_directory         "~/usr/music"
 987 #
 988 # This setting sets the MPD internal playlist directory. The purpose of this
 989 # directory is storage for playlists created by MPD. The server will use
 990 # playlist files not created by the server but only if they are in the MPD
 991 # format. This setting defaults to playlist saving being disabled.
 992 #
 993 playlist_directory              "~/.mpd/playlists"
 994 #
 995 # This setting sets the location of the MPD database. This file is used to
 996 # load the database at server start up and store the database while the
 997 # server is not up. This setting defaults to disabled which will allow
 998 # MPD to accept files over ipc socket (using file:// protocol) or streaming
 999 # files over an accepted protocol.
1000 #
1001 db_file                 "~/.mpd/database"
1002 #
1003 # These settings are the locations for the daemon log files for the daemon.
1004 # These logs are great for troubleshooting, depending on your log_level
1005 # settings.
1006 #
1007 # The special value "syslog" makes MPD use the local syslog daemon. This
1008 # setting defaults to logging to syslog, otherwise logging is disabled.
1009 #
1010 log_file                        "~/.mpd/log"
1011 #
1012 # This setting sets the location of the file which stores the process ID
1013 # for use of mpd --kill and some init scripts. This setting is disabled by
1014 # default and the pid file will not be stored.
1015 #
1016 pid_file                        "~/.mpd/pid"
1017 #
1018 # This setting sets the location of the file which contains information about
1019 # most variables to get MPD back into the same general shape it was in before
1020 # it was brought down. This setting is disabled by default and the server
1021 # state will be reset on server start up.
1022 #
1023 state_file                      "~/.mpd/state"
1024 #
1025 # The location of the sticker database.  This is a database which
1026 # manages dynamic information attached to songs.
1027 #
1028 sticker_file                    "~/.mpd/sticker.sql"
1029 #
1030 ###############################################################################
1031
1032
1033 # General music daemon options ################################################
1034 #
1035 # This setting specifies the user that MPD will run as. MPD should never run as
1036 # root and you may use this setting to make MPD change its user ID after
1037 # initialization. This setting is disabled by default and MPD is run as the
1038 # current user.
1039 #
1040 #user                           "nobody"
1041 #
1042 # This setting specifies the group that MPD will run as. If not specified
1043 # primary group of user specified with "user" setting will be used (if set).
1044 # This is useful if MPD needs to be a member of group such as "audio" to
1045 # have permission to use sound card.
1046 #
1047 #group                          "nogroup"
1048 #
1049 # This setting sets the address for the daemon to listen on. Careful attention
1050 # should be paid if this is assigned to anything other then the default, any.
1051 # This setting can deny access to control of the daemon. Not effective if
1052 # systemd socket activiation is in use.
1053 #
1054 # For network
1055 #bind_to_address                "any"
1056 #
1057 # And for Unix Socket
1058 #bind_to_address                "~/.mpd/socket"
1059 #
1060 # This setting is the TCP port that is desired for the daemon to get assigned
1061 # to.
1062 #
1063 #port                           "6600"
1064 #
1065 # This setting controls the type of information which is logged. Available
1066 # setting arguments are "default", "secure" or "verbose". The "verbose" setting
1067 # argument is recommended for troubleshooting, though can quickly stretch
1068 # available resources on limited hardware storage.
1069 #
1070 #log_level                      "default"
1071 #
1072 # If you have a problem with your MP3s ending abruptly it is recommended that
1073 # you set this argument to "no" to attempt to fix the problem. If this solves
1074 # the problem, it is highly recommended to fix the MP3 files with vbrfix
1075 # (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
1076 # point gapless MP3 playback can be enabled.
1077 #
1078 #gapless_mp3_playback                   "yes"
1079 #
1080 # Setting "restore_paused" to "yes" puts MPD into pause mode instead
1081 # of starting playback after startup.
1082 #
1083 #restore_paused "no"
1084 #
1085 # This setting enables MPD to create playlists in a format usable by other
1086 # music players.
1087 #
1088 #save_absolute_paths_in_playlists       "no"
1089 #
1090 # This setting defines a list of tag types that will be extracted during the
1091 # audio file discovery process. The complete list of possible values can be
1092 # found in the user manual.
1093 #metadata_to_use        "artist,album,title,track,name,genre,date,composer,performer,disc"
1094 #
1095 # This setting enables automatic update of MPD's database when files in
1096 # music_directory are changed.
1097 #
1098 #auto_update    "yes"
1099 #
1100 # Limit the depth of the directories being watched, 0 means only watch
1101 # the music directory itself.  There is no limit by default.
1102 #
1103 #auto_update_depth "3"
1104 #
1105 ###############################################################################
1106
1107
1108 # Symbolic link behavior ######################################################
1109 #
1110 # If this setting is set to "yes", MPD will discover audio files by following
1111 # symbolic links outside of the configured music_directory.
1112 #
1113 #follow_outside_symlinks        "yes"
1114 #
1115 # If this setting is set to "yes", MPD will discover audio files by following
1116 # symbolic links inside of the configured music_directory.
1117 #
1118 #follow_inside_symlinks         "yes"
1119 #
1120 ###############################################################################
1121
1122
1123 # Zeroconf / Avahi Service Discovery ##########################################
1124 #
1125 # If this setting is set to "yes", service information will be published with
1126 # Zeroconf / Avahi.
1127 #
1128 #zeroconf_enabled               "yes"
1129 #
1130 # The argument to this setting will be the Zeroconf / Avahi unique name for
1131 # this MPD server on the network.
1132 #
1133 #zeroconf_name                  "Music Player"
1134 #
1135 ###############################################################################
1136
1137
1138 # Permissions #################################################################
1139 #
1140 # If this setting is set, MPD will require password authorization. The password
1141 # setting can be specified multiple times for different password profiles.
1142 #
1143 #password                        "password@read,add,control,admin"
1144 #
1145 # This setting specifies the permissions a user has who has not yet logged in.
1146 #
1147 #default_permissions             "read,add,control,admin"
1148 #
1149 ###############################################################################
1150
1151
1152 # Database #######################################################################
1153 #
1154
1155 #database {
1156 #       plugin "proxy"
1157 #       host "other.mpd.host"
1158 #       port "6600"
1159 #}
1160
1161 # Input #######################################################################
1162 #
1163
1164 input {
1165         plugin "curl"
1166 #       proxy "proxy.isp.com:8080"
1167 #       proxy_user "user"
1168 #       proxy_password "password"
1169 }
1170
1171 #
1172 ###############################################################################
1173
1174 # Audio Output ################################################################
1175 #
1176
1177 audio_output {
1178     type    "pulse"
1179     name    "pulse audio"
1180 }
1181
1182 audio_output {
1183     type    "fifo"
1184     name    "my_fifo"
1185     path    "/tmp/mpd.fifo"
1186     format  "44100:16:2"
1187 }
1188
1189 # MPD supports various audio output types, as well as playing through multiple
1190 # audio outputs at the same time, through multiple audio_output settings
1191 # blocks. Setting this block is optional, though the server will only attempt
1192 # autodetection for one sound card.
1193 #
1194 # An example of an ALSA output:
1195 #
1196 #audio_output {
1197 #       type            "alsa"
1198 #       name            "My ALSA Device"
1199 ##      device          "hw:0,0"        # optional
1200 ##      mixer_type      "hardware"      # optional
1201 ##      mixer_device    "default"       # optional
1202 ##      mixer_control   "PCM"           # optional
1203 ##      mixer_index     "0"             # optional
1204 #}
1205 #
1206 # An example of an OSS output:
1207 #
1208 #audio_output {
1209 #       type            "oss"
1210 #       name            "My OSS Device"
1211 ##      device          "/dev/dsp"      # optional
1212 ##      mixer_type      "hardware"      # optional
1213 ##      mixer_device    "/dev/mixer"    # optional
1214 ##      mixer_control   "PCM"           # optional
1215 #}
1216 #
1217 # An example of a shout output (for streaming to Icecast):
1218 #
1219 #audio_output {
1220 #       type            "shout"
1221 #       encoder         "vorbis"                # optional
1222 #       name            "My Shout Stream"
1223 #       host            "localhost"
1224 #       port            "8000"
1225 #       mount           "/mpd.ogg"
1226 #       password        "hackme"
1227 #       quality         "5.0"
1228 #       bitrate         "128"
1229 #       format          "44100:16:1"
1230 ##      protocol        "icecast2"              # optional
1231 ##      user            "source"                # optional
1232 ##      description     "My Stream Description" # optional
1233 ##      url             "http://example.com"    # optional
1234 ##      genre           "jazz"                  # optional
1235 ##      public          "no"                    # optional
1236 ##      timeout         "2"                     # optional
1237 ##      mixer_type      "software"              # optional
1238 #}
1239 #
1240 # An example of a recorder output:
1241 #
1242 #audio_output {
1243 #       type            "recorder"
1244 #       name            "My recorder"
1245 #       encoder         "vorbis"                # optional, vorbis or lame
1246 #       path            "/var/lib/mpd/recorder/mpd.ogg"
1247 ##      quality         "5.0"                   # do not define if bitrate is defined
1248 #       bitrate         "128"                   # do not define if quality is defined
1249 #       format          "44100:16:1"
1250 #}
1251 #
1252 # An example of a httpd output (built-in HTTP streaming server):
1253 #
1254 #audio_output {
1255 #       type            "httpd"
1256 #       name            "My HTTP Stream"
1257 #       encoder         "vorbis"                # optional, vorbis or lame
1258 #       port            "8000"
1259 #       bind_to_address "0.0.0.0"               # optional, IPv4 or IPv6
1260 ##      quality         "5.0"                   # do not define if bitrate is defined
1261 #       bitrate         "128"                   # do not define if quality is defined
1262 #       format          "44100:16:1"
1263 #       max_clients     "0"                     # optional 0=no limit
1264 #}
1265 #
1266 # An example of a pulseaudio output (streaming to a remote pulseaudio server)
1267 #
1268 #audio_output {
1269 #       type            "pulse"
1270 #       name            "My Pulse Output"
1271 ##      server          "remote_server"         # optional
1272 ##      sink            "remote_server_sink"    # optional
1273 #}
1274 #
1275 # An example of a winmm output (Windows multimedia API).
1276 #
1277 #audio_output {
1278 #       type            "winmm"
1279 #       name            "My WinMM output"
1280 ##      device          "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1281 #               or
1282 ##      device          "0"             # optional
1283 ##      mixer_type      "hardware"      # optional
1284 #}
1285 #
1286 # An example of an openal output.
1287 #
1288 #audio_output {
1289 #       type            "openal"
1290 #       name            "My OpenAL output"
1291 ##      device          "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1292 #}
1293 #
1294 # An example of an sndio output.
1295 #
1296 #audio_output {
1297 #       type            "sndio"
1298 #       name            "sndio output"
1299 #       mixer_type      "software"
1300 #}
1301 #
1302 # An example of an OS X output:
1303 #
1304 #audio_output {
1305 #       type            "osx"
1306 #       name            "My OS X Device"
1307 ##      device          "Built-in Output"       # optional
1308 ##      channel_map      "-1,-1,0,1"    # optional
1309 #}
1310 #
1311 ## Example "pipe" output:
1312 #
1313 #audio_output {
1314 #       type            "pipe"
1315 #       name            "my pipe"
1316 #       command         "aplay -f cd 2>/dev/null"
1317 ## Or if you're want to use AudioCompress
1318 #       command         "AudioCompress -m | aplay -f cd 2>/dev/null"
1319 ## Or to send raw PCM stream through PCM:
1320 #       command         "nc example.org 8765"
1321 #       format          "44100:16:2"
1322 #}
1323 #
1324 ## An example of a null output (for no audio output):
1325 #
1326 #audio_output {
1327 #       type            "null"
1328 #       name            "My Null Output"
1329 #       mixer_type      "none"                  # optional
1330 #}
1331 #
1332 ###############################################################################
1333
1334
1335 # Normalization automatic volume adjustments ##################################
1336 #
1337 # This setting specifies the type of ReplayGain to use. This setting can have
1338 # the argument "off", "album", "track" or "auto". "auto" is a special mode that
1339 # chooses between "track" and "album" depending on the current state of
1340 # random playback. If random playback is enabled then "track" mode is used.
1341 # See <http://www.replaygain.org> for more details about ReplayGain.
1342 # This setting is off by default.
1343 #
1344 #replaygain                     "album"
1345 #
1346 # This setting sets the pre-amp used for files that have ReplayGain tags. By
1347 # default this setting is disabled.
1348 #
1349 #replaygain_preamp              "0"
1350 #
1351 # This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1352 # By default this setting is disabled.
1353 #
1354 #replaygain_missing_preamp      "0"
1355 #
1356 # This setting enables or disables ReplayGain limiting.
1357 # MPD calculates actual amplification based on the ReplayGain tags
1358 # and replaygain_preamp / replaygain_missing_preamp setting.
1359 # If replaygain_limit is enabled MPD will never amplify audio signal
1360 # above its original level. If replaygain_limit is disabled such amplification
1361 # might occur. By default this setting is enabled.
1362 #
1363 #replaygain_limit               "yes"
1364 #
1365 # This setting enables on-the-fly normalization volume adjustment. This will
1366 # result in the volume of all playing audio to be adjusted so the output has
1367 # equal "loudness". This setting is disabled by default.
1368 #
1369 #volume_normalization           "no"
1370 #
1371 ###############################################################################
1372
1373 # Character Encoding ##########################################################
1374 #
1375 # If file or directory names do not display correctly for your locale then you
1376 # may need to modify this setting.
1377 #
1378 #filesystem_charset             "UTF-8"
1379 #
1380 ###############################################################################
1381 #+end_src
1382
1383 ** msmtp
1384 :PROPERTIES:
1385 :header-args+: :tangle ~/.msmtprc
1386 :END:
1387
1388 #+begin_src conf
1389 # Set default values for all following accounts.
1390 defaults
1391 port 587
1392 tls on
1393 auth on
1394 #tls_trust_file /etc/ssl/certs/ca-certificates.crt
1395 logfile ~/.msmtp.log
1396
1397 # aminb
1398 account aminb
1399 host mail.aminb.org
1400 # use `msmtp -a aminb --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1401 tls_fingerprint DE:5F:73:0C:F7:9A:7B:1D:55:AA:49:28:E7:28:49:24:A4:08:55:00:7A:7E:D8:7F:30:06:26:24:11:29:61:07
1402 tls_starttls on
1403 from amin@aminb.org
1404 user amin@aminb.org
1405 passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
1406
1407 account bandali-me : aminb
1408 from amin@bandali.me
1409
1410 # gnu
1411 account gnu
1412 host fencepost.gnu.org
1413 # use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1414 tls_fingerprint FB:DB:E3:7D:96:22:22:20:9F:4A:FD:70:96:99:50:5C:39:B2:29:D9:47:47:52:A8:5A:4A:DF:70:9D:21:DE:C4
1415 tls_starttls on
1416 from bandali@gnu.org
1417 user bandali
1418 passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
1419
1420 # gnu (old)
1421 account gnu-aminb : gnu
1422 from aminb@gnu.org
1423 account gnu-amin : gnu
1424 from amin@gnu.org
1425 account gnu-mab : gnu
1426 from mab@gnu.org
1427
1428 # uwaterloo
1429 account uwaterloo
1430 host connect.uwaterloo.ca
1431 tls_starttls on
1432 from abandali@uwaterloo.ca
1433 user abandali
1434 passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
1435 tls_trust_file /etc/ssl/certs/ca-certificates.crt
1436
1437 # Set a default account
1438 account default : aminb
1439 #+end_src
1440
1441 ** ncmpcpp
1442
1443 *** config
1444 :PROPERTIES:
1445 :header-args+: :tangle ~/.ncmpcpp/config
1446 :END:
1447
1448 #+begin_src conf :tangle no
1449 ##############################################################
1450 ## This is the example configuration file. Copy it to       ##
1451 ## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
1452 ## and set up your preferences.                             ##
1453 ##############################################################
1454 #
1455 ##### directories ######
1456 ##
1457 ## Directory for storing ncmpcpp related files.
1458 ## Changing it is useful if you want to store
1459 ## everything somewhere else and provide command
1460 ## line setting for alternative location to config
1461 ## file which defines that while launching ncmpcpp.
1462 ##
1463 #
1464 ncmpcpp_directory = ~/.ncmpcpp
1465 #
1466 ##
1467 ## Directory for storing downloaded lyrics. It
1468 ## defaults to ~/.lyrics since other MPD clients
1469 ## (eg. ncmpc) also use that location.
1470 ##
1471 #
1472 #lyrics_directory = ~/.lyrics
1473 #
1474 ##### connection settings #####
1475 #
1476 #mpd_host = localhost
1477 #
1478 #mpd_port = 6600
1479 #
1480 #mpd_connection_timeout = 5
1481 #
1482 ## Needed for tag editor and file operations to work.
1483 ##
1484 mpd_music_dir = ~/usr/music
1485 #
1486 #mpd_crossfade_time = 5
1487 #
1488 ##### music visualizer #####
1489 ##
1490 ## Note: In order to make music visualizer work you'll
1491 ## need to use mpd fifo output, whose format parameter
1492 ## has to be set to 44100:16:1 for mono visualization
1493 ## or 44100:16:2 for stereo visualization. Example
1494 ## configuration (it has to be put into mpd.conf):
1495 ##
1496 ## audio_output {
1497 ##        type            "fifo"
1498 ##        name            "Visualizer feed"
1499 ##        path            "/tmp/mpd.fifo"
1500 ##        format          "44100:16:2"
1501 ## }
1502 ##
1503 #
1504 visualizer_fifo_path = /tmp/mpd.fifo
1505 #
1506 ##
1507 ## Note: Below parameter is needed for ncmpcpp
1508 ## to determine which output provides data for
1509 ## visualizer and thus allow syncing between
1510 ## visualization and sound as currently there
1511 ## are some problems with it.
1512 ##
1513 #
1514 visualizer_output_name = my fifo
1515 #
1516 ##
1517 ## If you set format to 44100:16:2, make it 'yes'.
1518 ##
1519 visualizer_in_stereo = yes
1520 #
1521 ##
1522 ## Multiply received samples by given value. Very
1523 ## useful for proper visualization of quiet music.
1524 ##
1525 #visualizer_sample_multiplier = 1
1526 #
1527 ##
1528 ## Note: Below parameter defines how often ncmpcpp
1529 ## has to "synchronize" visualizer and audio outputs.
1530 ## 30 seconds is optimal value, but if you experience
1531 ## synchronization problems, set it to lower value.
1532 ## Keep in mind that sane values start with >=10.
1533 ##
1534 #
1535 visualizer_sync_interval = 30
1536 #
1537 ##
1538 ## Note: To enable spectrum frequency visualization
1539 ## you need to compile ncmpcpp with fftw3 support.
1540 ##
1541 #
1542 ## Available values: spectrum, wave, wave_filled, ellipse.
1543 ##
1544 visualizer_type = spectrum
1545 #
1546 #visualizer_look = ●▮
1547 visualizer_look = "●•"
1548 #
1549 #visualizer_color = blue, cyan, green, yellow, magenta, red
1550 #
1551 ## Alternative subset of 256 colors for terminals that support it.
1552 ##
1553 #visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
1554 #
1555 ##### system encoding #####
1556 ##
1557 ## ncmpcpp should detect your charset encoding
1558 ## but if it failed to do so, you can specify
1559 ## charset encoding you are using here.
1560 ##
1561 ## Note: You can see whether your ncmpcpp build
1562 ## supports charset detection by checking output
1563 ## of `ncmpcpp --version`.
1564 ##
1565 ## Note: Since MPD uses UTF-8 by default, setting
1566 ## this option makes sense only if your encoding
1567 ## is different.
1568 ##
1569 #
1570 #system_encoding = ""
1571 #
1572 ##### delays #####
1573 #
1574 ## Time of inactivity (in seconds) after playlist
1575 ## highlighting will be disabled (0 = always on).
1576 ##
1577 #playlist_disable_highlight_delay = 5
1578 #
1579 ## Defines how long messages are supposed to be visible.
1580 ##
1581 #message_delay_time = 5
1582 #
1583 ##### song format #####
1584 ##
1585 ## For a song format you can use:
1586 ##
1587 ## %l - length
1588 ## %f - filename
1589 ## %D - directory
1590 ## %a - artist
1591 ## %A - album artist
1592 ## %t - title
1593 ## %b - album
1594 ## %y - date
1595 ## %n - track number (01/12 -> 01)
1596 ## %N - full track info (01/12 -> 01/12)
1597 ## %g - genre
1598 ## %c - composer
1599 ## %p - performer
1600 ## %d - disc
1601 ## %C - comment
1602 ## %P - priority
1603 ## $R - begin right alignment
1604 ##
1605 ## If you want to make sure that a part of the format is displayed
1606 ## only when certain tags are present, you can archieve it by
1607 ## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
1608 ## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
1609 ## It is also possible to define a list of alternatives by providing
1610 ## several groups and separating them with '|', e.g. '{%t}|{%f}'
1611 ## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
1612 ## present.
1613 ##
1614 ## Note: If you want to set limit on maximal length of a tag, just
1615 ## put the appropriate number between % and character that defines
1616 ## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
1617 ##
1618 ## In addition, formats support markers used for text attributes.
1619 ## They are followed by character '$'. After that you can put:
1620 ##
1621 ## - 0 - default window color (discards all other colors)
1622 ## - 1 - black
1623 ## - 2 - red
1624 ## - 3 - green
1625 ## - 4 - yellow
1626 ## - 5 - blue
1627 ## - 6 - magenta
1628 ## - 7 - cyan
1629 ## - 8 - white
1630 ## - 9 - end of current color
1631 ## - b - bold text
1632 ## - u - underline text
1633 ## - r - reverse colors
1634 ## - a - use alternative character set
1635 ##
1636 ## If you don't want to use a non-color attribute anymore, just put it
1637 ## again, but this time insert character '/' between '$' and attribute
1638 ## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
1639 ## or filename with reversed colors.
1640 ##
1641 ## If you want to use 256 colors and/or background colors in formats
1642 ## (the naming scheme is described below in section about color
1643 ## definitions), it can be done with the syntax $(COLOR), e.g. to set
1644 ## the artist tag to one of the non-standard colors and make it have
1645 ## yellow background, you need to write $(197_yellow)%a$(end). Note
1646 ## that for standard colors this is interchangable with attributes
1647 ## listed above.
1648 ##
1649 ## Note: colors can be nested.
1650 ##
1651 #
1652 #song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
1653 #
1654 #song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
1655 #
1656 #song_library_format = {%n - }{%t}|{%f}
1657 #
1658 #
1659 #alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
1660 #
1661 #alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
1662 #
1663 #now_playing_prefix = $b
1664 #
1665 #now_playing_suffix = $/b
1666 #
1667 #browser_playlist_prefix = "$2playlist$9 "
1668 #
1669 #selected_item_prefix = $6
1670 #
1671 #selected_item_suffix = $9
1672 #
1673 #modified_item_prefix = $3> $9
1674 #
1675 ##
1676 ## Note: attributes are not supported for the following variables.
1677 ##
1678 #song_window_title_format = {%a - }{%t}|{%f}
1679 ##
1680 ## Note: Below variables are used for sorting songs in browser.
1681 ## The sort mode determines how songs are sorted, and can be used
1682 ## in combination with a sort format to specify a custom sorting format.
1683 ## Available values for browser_sort_mode are "name", "mtime", "format"
1684 ## and "noop".
1685 ##
1686 #
1687 #browser_sort_mode = name
1688 #
1689 #browser_sort_format = {%a - }{%t}|{%f} {(%l)}
1690 #
1691 ##### columns settings #####
1692 ##
1693 ## syntax of song columns list format is "column column etc."
1694 ##
1695 ## - syntax for each column is:
1696 ##
1697 ## (width of the column)[color of the column]{displayed tag}
1698 ##
1699 ## Note: Width is by default in %, if you want a column to
1700 ## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
1701 ## will be the column that take 10% of screen (so the real width
1702 ## will depend on actual screen size), whereas (10f)[white]{a}
1703 ## will take 10 terminal cells, no matter how wide the screen is.
1704 ##
1705 ## - color is optional (if you want the default one,
1706 ##   leave the field empty).
1707 ##
1708 ## Note: You can give a column additional attributes by putting appropriate
1709 ## character after displayed tag character. Available attributes are:
1710 ##
1711 ## - r - column will be right aligned
1712 ## - E - if tag is empty, empty tag marker won't be displayed
1713 ##
1714 ## You can also:
1715 ##
1716 ## - give a column custom name by putting it after attributes,
1717 ##   separated with character ':', e.g. {lr:Length} gives you
1718 ##   right aligned column of lengths named "Length".
1719 ##
1720 ## - define sequence of tags, that have to be displayed in case
1721 ##   predecessor is empty in a way similar to the one in classic
1722 ##   song format, i.e. using '|' character, e.g. {a|c|p:Owner}
1723 ##   creates column named "Owner" that tries to display artist
1724 ##   tag and then composer and performer if previous ones are
1725 ##   not available.
1726 ##
1727 #
1728 #song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
1729 #
1730 ##### various settings #####
1731 #
1732 ##
1733 ## Note: Custom command that will be executed each
1734 ## time song changes. Useful for notifications etc.
1735 ##
1736 #execute_on_song_change = ""
1737 #
1738 #playlist_show_mpd_host = no
1739 #
1740 #playlist_show_remaining_time = no
1741 #
1742 #playlist_shorten_total_times = no
1743 #
1744 #playlist_separate_albums = no
1745 #
1746 ##
1747 ## Note: Possible display modes: classic, columns.
1748 ##
1749 #playlist_display_mode = columns
1750 #
1751 #browser_display_mode = classic
1752 #
1753 #search_engine_display_mode = classic
1754 #
1755 #playlist_editor_display_mode = classic
1756 #
1757 #discard_colors_if_item_is_selected = yes
1758 #
1759 #incremental_seeking = yes
1760 #
1761 #seek_time = 1
1762 #
1763 #volume_change_step = 2
1764 #
1765 #autocenter_mode = no
1766 #
1767 #centered_cursor = no
1768 #
1769 ##
1770 ## Note: You can specify third character which will
1771 ## be used to build 'empty' part of progressbar.
1772 ##
1773 #progressbar_look = =>
1774 progressbar_look = "─╼╶"
1775 #progressbar_look = "─⊙╶"
1776 #
1777 #progressbar_boldness = yes
1778 #
1779 ## Available values: database, playlist.
1780 ##
1781 #default_place_to_search_in = database
1782 #
1783 ## Available values: classic, alternative.
1784 ##
1785 #user_interface = classic
1786 #
1787 #data_fetching_delay = yes
1788 #
1789 ## Available values: artist, album_artist, date, genre, composer, performer.
1790 ##
1791 #media_library_primary_tag = artist
1792 #
1793 ## Available values: wrapped, normal.
1794 ##
1795 #default_find_mode = wrapped
1796 #
1797 #default_tag_editor_pattern = %n - %t
1798 #
1799 #header_visibility = yes
1800 #
1801 #statusbar_visibility = yes
1802 #
1803 #titles_visibility = yes
1804 #
1805 #header_text_scrolling = yes
1806 #
1807 #cyclic_scrolling = no
1808 #
1809 #lines_scrolled = 2
1810 #
1811 #follow_now_playing_lyrics = no
1812 #
1813 #fetch_lyrics_for_current_song_in_background = no
1814 #
1815 #store_lyrics_in_song_dir = no
1816 #
1817 #generate_win32_compatible_filenames = yes
1818 #
1819 #allow_for_physical_item_deletion = no
1820 #
1821 ##
1822 ## Note: If you set this variable, ncmpcpp will try to
1823 ## get info from last.fm in language you set and if it
1824 ## fails, it will fall back to english. Otherwise it will
1825 ## use english the first time.
1826 ##
1827 ## Note: Language has to be expressed as an ISO 639 alpha-2 code.
1828 ##
1829 #lastfm_preferred_language = en
1830 #
1831 #show_hidden_files_in_local_browser = no
1832 #
1833 ##
1834 ## How shall screen switcher work?
1835 ##
1836 ## - "previous" - switch between the current and previous screen.
1837 ## - "screen1,...,screenN" - switch between given sequence of screens.
1838 ##
1839 ## Screens available for use: help, playlist, browser, search_engine,
1840 ## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
1841 ##
1842 #screen_switcher_mode = playlist, browser
1843 #
1844 ##
1845 ## Note: You can define startup screen
1846 ## by choosing screen from the list above.
1847 ##
1848 #startup_screen = playlist
1849 #
1850 ##
1851 ## Note: You can define startup slave screen
1852 ## by choosing screen from the list above or
1853 ## an empty value for no slave screen.
1854 ##
1855 #startup_slave_screen = ""
1856 #
1857 #startup_slave_screen_focus = no
1858 #
1859 ##
1860 ## Default width of locked screen (in %).
1861 ## Acceptable values are from 20 to 80.
1862 ##
1863 #
1864 #locked_screen_width_part = 50
1865 #
1866 #ask_for_locked_screen_width_part = yes
1867 #
1868 #jump_to_now_playing_song_at_start = yes
1869 #
1870 #ask_before_clearing_playlists = yes
1871 #
1872 #clock_display_seconds = no
1873 #
1874 #display_volume_level = yes
1875 #
1876 #display_bitrate = no
1877 #
1878 #display_remaining_time = no
1879 #
1880 ## Available values: none, basic, extended, perl.
1881 ##
1882 #regular_expressions = perl
1883 #
1884 ##
1885 ## Note: If below is enabled, ncmpcpp will ignore leading
1886 ## "The" word while sorting items in browser, tags in
1887 ## media library, etc.
1888 ##
1889 #ignore_leading_the = no
1890 #
1891 #block_search_constraints_change_if_items_found = yes
1892 #
1893 #mouse_support = yes
1894 #
1895 #mouse_list_scroll_whole_page = yes
1896 #
1897 #empty_tag_marker = <empty>
1898 #
1899 #tags_separator = " | "
1900 #
1901 #tag_editor_extended_numeration = no
1902 #
1903 #media_library_sort_by_mtime = no
1904 #
1905 #enable_window_title = yes
1906 #
1907 ##
1908 ## Note: You can choose default search mode for search
1909 ## engine. Available modes are:
1910 ##
1911 ## - 1 - use mpd built-in searching (no regexes, pattern matching)
1912 ## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
1913 ##       but if your mpd is on a remote machine, downloading big database
1914 ##       to process it can take a while
1915 ## - 3 - match only exact values (this mode uses mpd function for searching
1916 ##       in database and local one for searching in current playlist)
1917 ##
1918 #
1919 #search_engine_default_search_mode = 1
1920 #
1921 #external_editor = nano
1922 #
1923 ## Note: set to yes if external editor is a console application.
1924 ##
1925 #use_console_editor = yes
1926 #
1927 ##### colors definitions #####
1928 ##
1929 ## It is possible to set a background color by setting a color
1930 ## value "<foreground>_<background>", e.g. red_black will set
1931 ## foregound color to red and background color to black.
1932 ##
1933 ## In addition, for terminals that support 256 colors it
1934 ## is possible to set one of them by using a number in range
1935 ## [1, 256] instead of color name, e.g. numerical value
1936 ## corresponding to red_black is 2_1. To find out if the
1937 ## terminal supports 256 colors, run ncmpcpp and check out
1938 ## the bottom of the help screen for list of available colors
1939 ## and their numerical values.
1940 ##
1941 ## Note: due to technical limitations of ncurses, if 256 colors
1942 ## are used, it is possible to either use only the colors with
1943 ## default background color, or all pairs from 1_1 up to 254_127,
1944 ## depending on the ncurses version used.
1945 ##
1946 #
1947 #colors_enabled = yes
1948 #
1949 #empty_tag_color = cyan
1950 #
1951 #header_window_color = default
1952 #
1953 #volume_color = default
1954 #
1955 #state_line_color = default
1956 #
1957 #state_flags_color = default
1958 #
1959 #main_window_color = yellow
1960 #
1961 #color1 = white
1962 #
1963 #color2 = green
1964 #
1965 #main_window_highlight_color = yellow
1966 #
1967 #progressbar_color = black
1968 #
1969 #progressbar_elapsed_color = green
1970 #
1971 #statusbar_color = default
1972 #
1973 #alternative_ui_separator_color = black
1974 #
1975 #active_column_color = red
1976 #
1977 #window_border_color = green
1978 #
1979 #active_window_border = red
1980 #
1981 #+end_src
1982
1983 *** bindings
1984 :PROPERTIES:
1985 :header-args+: :tangle ~/.ncmpcpp/bindings
1986 :END:
1987
1988 #+begin_src conf :tangle no
1989 def_key "j"
1990     scroll_down
1991 def_key "k"
1992     scroll_up
1993
1994 def_key "ctrl-u"
1995     page_up
1996 def_key "ctrl-d"
1997     page_down
1998
1999 def_key "h"
2000     previous_column
2001 def_key "l"
2002     next_column
2003
2004 def_key "."
2005     show_lyrics
2006
2007 def_key "n"
2008     next_found_item
2009 def_key "N"
2010     previous_found_item
2011
2012 def_key "J"
2013     move_sort_order_down
2014 def_key "K"
2015     move_sort_order_up
2016 #+end_src
2017
2018 ** notmuch
2019
2020 *** notmuch-config
2021 :PROPERTIES:
2022 :header-args+: :tangle ~/.notmuch-config
2023 :END:
2024
2025 #+begin_src conf
2026 # .notmuch-config - Configuration file for the notmuch mail system
2027 #
2028 # For more information about notmuch, see https://notmuchmail.org
2029
2030 # Database configuration
2031 #
2032 # The only value supported here is 'path' which should be the top-level
2033 # directory where your mail currently exists and to where mail will be
2034 # delivered in the future. Files should be individual email messages.
2035 # Notmuch will store its database within a sub-directory of the path
2036 # configured here named ".notmuch".
2037 #
2038 [database]
2039 path=/home/amin/oldmail
2040
2041 # User configuration
2042 #
2043 # Here is where you can let notmuch know how you would like to be
2044 # addressed. Valid settings are
2045 #
2046 #       name            Your full name.
2047 #       primary_email   Your primary email address.
2048 #       other_email     A list (separated by ';') of other email addresses
2049 #                       at which you receive email.
2050 #
2051 # Notmuch will use the various email addresses configured here when
2052 # formatting replies. It will avoid including your own addresses in the
2053 # recipient list of replies, and will set the From address based on the
2054 # address to which the original email was addressed.
2055 #
2056 [user]
2057 name=Amin Bandali
2058 primary_email=amin@aminb.org
2059 other_email=bandali@gnu.org;abandali@uwaterloo.ca;
2060
2061 # Configuration for "notmuch new"
2062 #
2063 # The following options are supported here:
2064 #
2065 #       tags    A list (separated by ';') of the tags that will be
2066 #               added to all messages incorporated by "notmuch new".
2067 #
2068 #       ignore  A list (separated by ';') of file and directory names
2069 #               that will not be searched for messages by "notmuch new".
2070 #
2071 #               NOTE: *Every* file/directory that goes by one of those
2072 #               names will be ignored, independent of its depth/location
2073 #               in the mail store.
2074 #
2075 [new]
2076 tags=new;
2077 #tags=unread;inbox;
2078 ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
2079
2080 # Search configuration
2081 #
2082 # The following option is supported here:
2083 #
2084 #       exclude_tags
2085 #               A ;-separated list of tags that will be excluded from
2086 #               search results by default.  Using an excluded tag in a
2087 #               query will override that exclusion.
2088 #
2089 [search]
2090 exclude_tags=deleted;spam;
2091
2092 # Maildir compatibility configuration
2093 #
2094 # The following option is supported here:
2095 #
2096 #       synchronize_flags      Valid values are true and false.
2097 #
2098 #       If true, then the following maildir flags (in message filenames)
2099 #       will be synchronized with the corresponding notmuch tags:
2100 #
2101 #               Flag    Tag
2102 #               ----    -------
2103 #               D       draft
2104 #               F       flagged
2105 #               P       passed
2106 #               R       replied
2107 #               S       unread (added when 'S' flag is not present)
2108 #
2109 #       The "notmuch new" command will notice flag changes in filenames
2110 #       and update tags, while the "notmuch tag" and "notmuch restore"
2111 #       commands will notice tag changes and update flags in filenames
2112 #
2113 [maildir]
2114 synchronize_flags=true
2115
2116 # Cryptography related configuration
2117 #
2118 # The following option is supported here:
2119 #
2120 #       gpg_path
2121 #               binary name or full path to invoke gpg.
2122 #
2123 [crypto]
2124 gpg_path=gpg
2125 #+end_src
2126
2127 *** pre-new hook
2128 :PROPERTIES:
2129 :header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
2130 :END:
2131
2132 #+begin_src sh
2133 touch /tmp/gnusieve.log
2134 sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
2135              -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
2136 #+end_src
2137
2138 *** post-new hook
2139 :PROPERTIES:
2140 :header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
2141 :END:
2142
2143 #+begin_src sh
2144 # apply sent tag to messages sent by me
2145 notmuch tag -new +sent -- from:amin@aminb.org or from:bandali@gnu.org or from:aminb@gnu.org or from:amin@gnu.org or from:mab@gnu.org or from:abandali@uwaterloo.ca
2146
2147 # initial tagging
2148 notmuch tag -latest                     -- tag:latest
2149 notmuch tag +inbox +unread +latest -new -- tag:new
2150
2151
2152 # apply tags to lists
2153
2154 # <aminb>
2155 notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
2156 notmuch tag -inbox +lists/haskell-weekly   -- folder:amin/lists/haskell-weekly
2157
2158 notmuch tag -inbox +pay     -- folder:amin/pay
2159 notmuch tag -inbox +banking -- folder:amin/banking
2160 notmuch tag -inbox +work    -- folder:amin/work
2161 # </aminb>
2162
2163 # <uw>
2164 notmuch tag -inbox +uw/cs136  -- folder:uwaterloo/lists/cs136
2165 notmuch tag -inbox +uw/cs846  -- folder:uwaterloo/lists/cs846
2166 notmuch tag -inbox +uw/ece750 -- folder:uwaterloo/lists/ece750
2167 notmuch tag -inbox +uw/se212  -- folder:uwaterloo/lists/se212
2168 notmuch tag -inbox +uw/se463  -- folder:uwaterloo/lists/se463
2169
2170 notmuch tag -inbox +lists/alloytools       -- folder:uwaterloo/lists/alloytools
2171 notmuch tag -inbox +lists/clvsingle        -- folder:uwaterloo/lists/Clvsingle
2172 notmuch tag -inbox +lists/gsa              -- folder:uwaterloo/lists/GSA
2173 notmuch tag -inbox +lists/math-grad        -- folder:uwaterloo/lists/Math-grad
2174 notmuch tag -inbox +lists/scs-grads        -- folder:uwaterloo/lists/scs-grads
2175 notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
2176 # </uw>
2177
2178 # <gnu>
2179 notmuch tag -inbox +l/emacs-devel       -- folder:gnu/l/emacs-devel
2180 notmuch tag -inbox +l/emacs-orgmode     -- folder:gnu/l/emacs-orgmode
2181 notmuch tag -inbox +l/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
2182 notmuch tag -inbox +l/fencepost-users   -- folder:gnu/l/fencepost-users
2183 notmuch tag -inbox +l/guix-devel        -- folder:gnu/l/guix-devel
2184 notmuch tag -inbox +l/guile-devel       -- folder:gnu/l/guile-devel
2185 notmuch tag -inbox +l/help-gnu-emacs    -- folder:gnu/l/help-gnu-emacs
2186 notmuch tag -inbox +l/info-gnu-emacs    -- folder:gnu/l/info-gnu-emacs
2187 notmuch tag -inbox +l/www-commits       -- folder:gnu/l/www-commits
2188 notmuch tag -inbox +l/www-discuss       -- folder:gnu/l/www-discuss
2189 notmuch tag -inbox +webmasters          -- folder:gnu/webmasters
2190
2191 notmuch tag -inbox +l/deepspec     -- folder:gnu/l/deepspec
2192 notmuch tag -inbox +l/haskell-cafe -- folder:gnu/l/haskell-cafe
2193 notmuch tag -inbox +l/haskell-art  -- folder:gnu/l/haskell-art
2194 notmuch tag -inbox +l/notmuch      -- folder:gnu/l/notmuch
2195
2196 notmuch tag -inbox +l/~aminb/test-priv         -- folder:gnu/l/~aminb/test-priv
2197 notmuch tag -inbox +l/~sircmpwn/sr.ht-admins   -- folder:gnu/l/~sircmpwn/sr.ht-admins
2198 notmuch tag -inbox +l/~sircmpwn/sr.ht-announce -- folder:gnu/l/~sircmpwn/sr.ht-announce
2199 notmuch tag -inbox +l/~sircmpwn/sr.ht-dev      -- folder:gnu/l/~sircmpwn/sr.ht-dev
2200 notmuch tag -inbox +l/~sircmpwn/sr.ht-discuss  -- folder:gnu/l/~sircmpwn/sr.ht-discuss
2201 # </gnu>
2202
2203 notmuch tag -inbox -unread +archive/notmuch     -- path:archive/notmuch/**
2204 notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**
2205 #+end_src
2206
2207 *** notmuch.service
2208 :PROPERTIES:
2209 :header-args+: :tangle ~/.config/systemd/user/notmuch.service
2210 :END:
2211
2212 #+begin_src conf :tangle no
2213 [Unit]
2214 Description=notmuch service
2215
2216 [Service]
2217 Type=oneshot
2218 ExecStart=/usr/bin/notmuch new
2219 StandardOutput=syslog
2220 StandardError=syslog
2221 #+end_src
2222
2223 *** notmuch.timer
2224 :PROPERTIES:
2225 :header-args+: :tangle ~/.config/systemd/user/notmuch.timer
2226 :END:
2227
2228 #+begin_src conf :tangle no
2229 [Unit]
2230 Description=notmuch timer
2231
2232 [Timer]
2233 OnCalendar=*:0/5
2234 Persistent=true
2235 Unit=notmuch.service
2236
2237 [Install]
2238 WantedBy=timers.target
2239 #+end_src
2240
2241 ** pacman
2242
2243 *** conf
2244
2245 #+begin_src conf :tangle /sudo::/etc/pacman.conf :comments none
2246 #
2247 # /etc/pacman.conf
2248 #
2249 # See the pacman.conf(5) manpage for option and repository directives
2250
2251 #
2252 # GENERAL OPTIONS
2253 #
2254 [options]
2255 # The following paths are commented out with their default values listed.
2256 # If you wish to use different paths, uncomment and update the paths.
2257 #RootDir     = /
2258 #DBPath      = /var/lib/pacman/
2259 #CacheDir    = /var/cache/pacman/pkg/
2260 #LogFile     = /var/log/pacman.log
2261 #GPGDir      = /etc/pacman.d/gnupg/
2262 #HookDir     = /etc/pacman.d/hooks/
2263 HoldPkg     = pacman glibc
2264 #XferCommand = /usr/bin/curl -L -C - -f -o %o %u
2265 #XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
2266 #CleanMethod = KeepInstalled
2267 #UseDelta    = 0.7
2268 Architecture = auto
2269
2270 # Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
2271 #IgnorePkg   =
2272 #IgnoreGroup =
2273
2274 #NoUpgrade   =
2275 #NoExtract   =
2276
2277 # Misc options
2278 #UseSyslog
2279 Color
2280 TotalDownload
2281 CheckSpace
2282 VerbosePkgLists
2283
2284 # By default, pacman accepts packages signed by keys that its local keyring
2285 # trusts (see pacman-key and its man page), as well as unsigned packages.
2286 SigLevel    = Required DatabaseOptional
2287 LocalFileSigLevel = Optional
2288 #RemoteFileSigLevel = Required
2289
2290 # NOTE: You must run `pacman-key --init` before first using pacman; the local
2291 # keyring can then be populated with the keys of all Arch/Parabola packagers
2292 # with `pacman-key --populate archlinux` and `pacman-key --populate parabola`.
2293
2294 #
2295 # REPOSITORIES
2296 #   - can be defined here or included from another file
2297 #   - pacman will search repositories in the order defined here
2298 #   - local/custom mirrors can be added here or in separate files
2299 #   - repositories listed first will take precedence when packages
2300 #     have identical names, regardless of version number
2301 #   - URLs will have $repo replaced by the name of the current repo
2302 #   - URLs will have $arch replaced by the name of the architecture
2303 #
2304 # Repository entries are of the format:
2305 #       [repo-name]
2306 #       Server = ServerName
2307 #       Include = IncludePath
2308 #
2309 # The header [repo-name] is crucial - it must be present and
2310 # uncommented to enable the repo.
2311 #
2312
2313 # The testing repositories are disabled by default. To enable, uncomment the
2314 # repo name header and Include lines. You can add preferred servers immediately
2315 # after the header, and they will be used before the default mirrors.
2316
2317 # NOTE: Nonprism is a particular repository that aims to provide software built
2318 # and patched without services under global data surveillance programs like PRISM,
2319 # XKeyscore and Tempora. For more info see: https://wiki.parabola.nu/Nonprism
2320
2321 #[nonprism-testing]
2322 #Include = /etc/pacman.d/mirrorlist
2323
2324 #[nonprism]
2325 #Include = /etc/pacman.d/mirrorlist
2326
2327 #[libre-testing]
2328 #Include = /etc/pacman.d/mirrorlist
2329
2330 [libre]
2331 Include = /etc/pacman.d/mirrorlist
2332
2333 #[testing]
2334 #Include = /etc/pacman.d/mirrorlist
2335
2336 [core]
2337 Include = /etc/pacman.d/mirrorlist
2338
2339 [extra]
2340 Include = /etc/pacman.d/mirrorlist
2341
2342 #[community-testing]
2343 #Include = /etc/pacman.d/mirrorlist
2344
2345 [community]
2346 Include = /etc/pacman.d/mirrorlist
2347
2348 # The PCR (Parabola Community Repository) contains packages maintained by trusted
2349 # members of the Parabola community. It also contains packages maintained by
2350 # Parabola developers, but that the developer decided didn't belong in core/libre.
2351
2352 #[pcr-testing]
2353 #Include = /etc/pacman.d/mirrorlist
2354
2355 [pcr]
2356 Include = /etc/pacman.d/mirrorlist
2357
2358 # If you want to run 32 bit applications on your x86_64 system,
2359 # enable the libre-multilib, multilib and pcr-multilib repositories as required here.
2360
2361 #[nonprism-multilib-testing]
2362 #Include = /etc/pacman.d/mirrorlist
2363
2364 #[nonprism-multilib]
2365 #Include = /etc/pacman.d/mirrorlist
2366
2367 #[libre-multilib-testing]
2368 #Include = /etc/pacman.d/mirrorlist
2369
2370 #[libre-multilib]
2371 #Include = /etc/pacman.d/mirrorlist
2372
2373 #[multilib-testing]
2374 #Include = /etc/pacman.d/mirrorlist
2375
2376 #[multilib]
2377 #Include = /etc/pacman.d/mirrorlist
2378
2379 #[pcr-multilib-testing]
2380 #Include = /etc/pacman.d/mirrorlist
2381
2382 #[pcr-multilib]
2383 #Include = /etc/pacman.d/mirrorlist
2384
2385 # Parabola also supports another community projects and personal repositories, to
2386 # find them check out this wiki page: https://wiki.parabola.nu/Repositories
2387
2388 # An example of a custom package repository.  See the pacman manpage for
2389 # tips on creating your own repositories.
2390 #[custom]
2391 #SigLevel = Optional TrustAll
2392 #Server = file:///home/custompkgs
2393
2394 Include = /etc/pacman.d/*.conf
2395 #+end_src
2396
2397 *** mirrorlist
2398
2399 #+begin_src conf :tangle /sudo::/etc/pacman.d/mirrorlist :comments none
2400 # Parabola GNU/Linux-libre - Last Updated: Wed Dec 20 02:59:35 GMT 2017
2401
2402 Server = http://mirror.fsf.org/parabola/$repo/os/$arch
2403 Server = http://mirror.fsf.org/parabola/$repo/os/$arch
2404 Server = http://mirror.fsf.org/parabola/$repo/os/$arch
2405 Server = http://mirror.fsf.org/parabola/$repo/os/$arch
2406
2407 # Location: London, UK
2408 # Responsible: Parabola Project
2409 # Note: Not really a mirror, automatically redirects you to an Arch
2410 #       mirror when possible. Works best specifying it a few times in a
2411 #       row (404s workaround).
2412 # Server = http://redirector.parabola.nu/$repo/os/$arch
2413 Server = https://redirector.parabola.nu/$repo/os/$arch
2414
2415 # Location: Reykjavík, Iceland
2416 # Responsible: Parabola Project
2417 # Note: Not really a mirror, automatically redirects you to a Parabola
2418 #       mirror that has the file you are looking for.
2419 # Server = http://repomirror.parabola.nu/$repo/os/$arch
2420 Server = https://repomirror.parabola.nu/$repo/os/$arch
2421
2422 # Location: Falkenstein, Germany
2423 # Server = http://mirror.grapentin.org/parabola/$repo/os/$arch
2424 Server = https://mirror.grapentin.org/parabola/$repo/os/$arch
2425
2426 # Location: Volendam, Netherlands
2427 Server = https://jeweet.net/repo/parabola/$repo/os/$arch
2428
2429 # Location: Amsterdam, Netherlands
2430 # Note: Not really a mirror, but a high-speed 10GiB cache for
2431 #       mirror.yandex.ru/mirrors/parabola
2432 # Server = http://parabola.isacdaavid.info:8080/$repo/os/$arch
2433 Server = https://parabola.isacdaavid.info:8081/$repo/os/$arch
2434
2435 # Location: Moscow, Russian Federation
2436 # Server = http://mirror.yandex.ru/mirrors/parabola/$repo/os/$arch
2437 Server = https://mirror.yandex.ru/mirrors/parabola/$repo/os/$arch
2438
2439 # Location: Ho Chi Minh City, Vietnam
2440 # Server = http://mirror.freedif.org/Parabola/$repo/os/$arch
2441 Server = https://mirror.freedif.org/Parabola/$repo/os/$arch
2442
2443 # Location: Los Angeles, CA, USA
2444 # Note: Also visit http://alfplayer.com/ for its SNAPSHOTS ARCHIVE
2445 Server = http://alfplayer.com/parabola/$repo/os/$arch
2446
2447 # Location: Boston, MA, USA
2448 Server = http://mirror.fsf.org/parabola/$repo/os/$arch
2449
2450 # Location: Austin, TX, USA
2451 # Server = http://parabola.serverpit.com/
2452 Server = https://parabola.serverpit.com/
2453
2454 # Location: Reykjavík, Iceland
2455 # Responsible: Parabola Project
2456 # Note: Currently pointing to repomirror.parabola.nu
2457 # Server = http://repo.parabola.nu/$repo/os/$arch
2458 Server = https://repo.parabola.nu/$repo/os/$arch
2459 #+end_src
2460
2461 ** pigeonhole
2462 *** amin.sieve
2463 :PROPERTIES:
2464 :header-args+: :tangle ~/mail/aminb.org/amin/sieve/amin.sieve :comments none
2465 :END:
2466
2467 #+begin_src conf
2468 require ["regex", "variables", "fileinto", "envelope",
2469          "mailbox", "imap4flags", "include"];
2470
2471 # webmasters
2472 if anyof (
2473   address :is "from" ["webmasters@gnu.org", "webmasters-comment@gnu.org"]) {
2474   fileinto :create "gnu.webmasters";
2475   stop;
2476 }
2477
2478 include :personal "lists";
2479 #+end_src
2480
2481 *** lists.sieve
2482 :PROPERTIES:
2483 :header-args+: :tangle ~/mail/aminb.org/amin/sieve/lists.sieve :comments none
2484 :END:
2485
2486 #+begin_src conf
2487 require ["regex", "variables", "fileinto", "envelope",
2488          "mailbox", "imap4flags", "include"];
2489
2490 # mailing lists
2491 if anyof (
2492     header :contains "list-id"
2493         [ "<emacs-devel.gnu.org>"
2494         , "<emacs-orgmode.gnu.org>"
2495         , "<emacsconf-discuss.gnu.org>"
2496         , "<fencepost-users.gnu.org>"
2497         , "<guix-devel.gnu.org>"
2498         , "<guile-devel.gnu.org>"
2499         , "<help-gnu-emacs.gnu.org>"
2500         , "<info-gnu-emacs.gnu.org>"
2501         , "<info-guix.gnu.org>"
2502         , "<www-commits.gnu.org>"
2503         , "<www-discuss.gnu.org>"
2504         , "<deepspec.lists.cs.princeton.edu>"
2505         , "<haskell-cafe.haskell.org>"
2506         , "<haskell-art.we.lurk.org>"
2507         , "<notmuch.notmuchmail.org>"
2508         ] ) {
2509     if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
2510         set :lower "listname" "${1}";
2511         fileinto :create "gnu.${listname}";
2512         stop;
2513     }
2514 }
2515
2516 # sr.ht lists, with dots ('.') omitted
2517 if anyof (
2518     header :contains "list-id"
2519         [ "<~bandali/public-inbox@lists.sr.ht>"
2520         , "<~sircmpwn/sr.ht-admins@lists.sr.ht>"
2521         , "<~sircmpwn/sr.ht-announce@lists.sr.ht>"
2522         , "<~sircmpwn/sr.ht-dev@lists.sr.ht>"
2523         , "<~sircmpwn/sr.ht-discuss@lists.sr.ht>"
2524         ] ) {
2525     if header :regex "list-id" "(~[a-z_0-9-]+)/([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)@" {
2526         set :lower "username" "${1}";
2527         set :lower "listname" "${2}${3}${4}${5}${6}${7}";
2528         fileinto :create "gnu.${username}.${listname}";
2529         stop;
2530     }
2531 }
2532 #+end_src
2533
2534 ** PowerTOP
2535 :PROPERTIES:
2536 :header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
2537 :END:
2538
2539 #+begin_src conf
2540 [Unit]
2541 Description=Powertop tunings
2542
2543 [Service]
2544 ExecStart=/usr/bin/powertop --auto-tune
2545 RemainAfterExit=true
2546
2547 [Install]
2548 WantedBy=multi-user.target
2549 #+end_src
2550
2551 ** redshift
2552 :PROPERTIES:
2553 :header-args+: :tangle ~/.config/redshift.conf :comments none
2554 :END:
2555
2556 #+begin_src conf
2557 ; Global settings for redshift
2558 [redshift]
2559 ; Set the day and night screen temperatures (Neutral is 6500K)
2560 ;temp-day=5700
2561 ;temp-night=3500
2562
2563 ;temp-day=6500
2564 temp-day=6200
2565 ;temp-night=4800
2566 ;temp-night=5000
2567 ;temp-night=4500
2568 temp-night=4000
2569
2570 ; Enable/Disable a smooth transition between day and night
2571 ; 0 will cause a direct change from day to night screen temperature.
2572 ; 1 will gradually increase or decrease the screen temperature.
2573 transition=1
2574
2575 ; Set the screen brightness. Default is 1.0.
2576 ;brightness=0.9
2577 ; It is also possible to use different settings for day and night
2578 ; since version 1.8.
2579 ;brightness-day=0.7
2580 ;brightness-night=0.4
2581 ; Set the screen gamma (for all colors, or each color channel
2582 ; individually)
2583 ;gamma=0.8
2584 ;gamma=1.0
2585 ;gamma=0.8:0.7:0.8
2586 ; This can also be set individually for day and night since
2587 ; version 1.10.
2588 ;gamma-day=0.8:0.7:0.8
2589 ;gamma-night=0.6
2590
2591 ; Set the location-provider: 'geoclue2' or 'manual'
2592 ; type 'redshift -l list' to see possible values.
2593 ; The location provider settings are in a different section.
2594 ;location-provider=manual
2595 location-provider=geoclue2
2596
2597 ; Set the adjustment-method: 'randr', 'vidmode'
2598 ; type 'redshift -m list' to see all possible values.
2599 ; 'randr' is the preferred method, 'vidmode' is an older API.
2600 ; but works in some cases when 'randr' does not.
2601 ; The adjustment method settings are in a different section.
2602 adjustment-method=randr
2603
2604 ; Configuration of the location-provider:
2605 ; type 'redshift -l PROVIDER:help' to see the settings.
2606 ; ex: 'redshift -l manual:help'
2607 ; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
2608 ; are negative numbers.
2609 ;[manual]
2610 ;lat=48.1
2611 ;lon=11.6
2612
2613 ; Configuration of the adjustment-method
2614 ; type 'redshift -m METHOD:help' to see the settings.
2615 ; ex: 'redshift -m randr:help'
2616 ; In this example, randr is configured to adjust screen 1.
2617 ; Note that the numbering starts from 0, so this is actually the
2618 ; second screen. If this option is not specified, Redshift will try
2619 ; to adjust _all_ screens.
2620 ;[randr]
2621 ;screen=1
2622 #+end_src
2623
2624 ** rofi
2625 :PROPERTIES:
2626 :header-args+: :tangle ~/.config/rofi/config
2627 :END:
2628
2629 #+begin_src conf
2630 ! rofi.font: Ubuntu Mono 13
2631 ! rofi.font: Inconsolata 16
2632 ! rofi.font: Iosevka 13
2633 ! rofi.font: Source Code Pro 11
2634 rofi.font: Source Code Pro 10.5
2635 rofi.modi: run,window
2636 ! rofi.width: 640
2637 rofi.width: 600
2638 !rofi.location: 2
2639 !rofi.yoffset: 200
2640 rofi.monitor: -1
2641 !rofi.lines: 10
2642
2643 !rofi.theme: /usr/share/rofi/themes//Arc.rasi
2644 !rofi.theme: /usr/share/rofi/themes//Paper.rasi
2645 !rofi.theme: /usr/share/rofi/themes//sidebar.rasi
2646
2647 rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
2648 #+end_src
2649
2650 ** rofi-pass
2651 :PROPERTIES:
2652 :header-args+: :tangle ~/.config/rofi-pass/config
2653 :END:
2654
2655 #+begin_src conf
2656 # permanently set alternative root dir
2657 # root=/path/to/root
2658
2659 # rofi command. Make sure to have "$@" as last argument
2660 _rofi () {
2661     #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
2662     rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
2663 }
2664
2665 # xdotool needs the keyboard layout to be set using setxkbmap
2666 # You can do this in your autostart scripts (e.g. xinitrc)
2667
2668 # If for some reason, you cannot do this, you can set the command here.
2669 # and set fix_layout to true
2670 fix_layout=false
2671
2672 layout_cmd () {
2673   setxkbmap us
2674 }
2675
2676 # fields to be used
2677 URL_field='url'
2678 USERNAME_field='user'
2679 AUTOTYPE_field='autotype'
2680
2681 # delay to be used for :delay keyword
2682 delay=2
2683
2684 ## Programs to be used
2685 # Editor
2686 EDITOR='gvim -f'
2687
2688 # Browser
2689 BROWSER='chromium'
2690
2691 ## Misc settings
2692
2693 default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
2694 auto_enter='false'
2695 notify='false'
2696 default_autotype='user :tab pass'
2697
2698 # color of the help messages
2699 # leave empty for autodetection
2700 help_color="#4872FF"
2701
2702 # Clipboard settings
2703 # Possible options: primary, clipboard, both
2704 clip=primary
2705
2706 # Options for generating new password entries
2707 # default_user is also used for password files that have no user field.
2708 default_user=aminb
2709 default_user2=aminban
2710 password_length=30
2711
2712 # Custom Keybindings
2713 #autotype="Alt+1"
2714 autotype="Alt+m"
2715 type_user="Alt+2"
2716 type_pass="Alt+3"
2717 open_url="Alt+4"
2718 copy_name="Alt+u"
2719 copy_url="Alt+l"
2720 copy_pass="Alt+p"
2721 show="Alt+o"
2722 copy_entry="Alt+2"
2723 type_entry="Alt+1"
2724 copy_menu="Alt+c"
2725 action_menu="Alt+a"
2726 type_menu="Alt+t"
2727 help="Alt+h"
2728 switch="Alt+x"
2729 insert_pass="Alt+n"
2730 #+end_src
2731
2732 ** sway
2733
2734 *** main
2735 :PROPERTIES:
2736 :header-args+: :tangle ~/.config/sway/config
2737 :END:
2738
2739 #+begin_src conf
2740 ### Variables
2741 # super
2742 set $mod Mod4
2743 # alt
2744 set $mod2 Mod1
2745 set $left h
2746 set $down j
2747 set $up k
2748 set $right l
2749 set $term urxvt
2750 set $menu rofi -show run -display-run '> ' -display-window ' 🗔 '
2751
2752 ### Output configuration
2753 #
2754 # Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/)
2755 output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
2756 #
2757 # Example configuration:
2758 #
2759 #   output HDMI-A-1 resolution 1920x1080 position 1920,0
2760 #
2761 # You can get the names of your outputs by running: swaymsg -t get_outputs
2762
2763 ### Idle configuration
2764
2765 exec swayidle \
2766    timeout 120  '[ -f ~/.nosleep ] || swaymsg "output * dpms off"' \
2767         resume  '[ -f ~/.nosleep ] || swaymsg "output * dpms on"'  \
2768
2769
2770 ### Key bindings
2771 #
2772 # Basics:
2773 #
2774     # start a terminal
2775     bindsym $mod+Return exec $term -name floating
2776     bindsym $mod+Shift+Return exec $term
2777     for_window [class="URxvt" instance="floating"] floating enable
2778
2779     # kill focused window
2780     bindsym $mod+Shift+q kill
2781
2782     # start your launcher
2783     bindsym $mod+d exec $menu
2784
2785     # password manager
2786     bindsym $mod2+space exec rofi-pass
2787
2788     # Drag floating windows by holding down $mod and left mouse button.
2789     # Resize them with right mouse button + $mod.
2790     # Despite the name, also works for non-floating windows.
2791     # Change normal to inverse to use left mouse button for resizing and right
2792     # mouse button for dragging.
2793     floating_modifier $mod normal
2794
2795     # reload the configuration file
2796     bindsym $mod+Shift+c reload
2797
2798     # exit sway (logs you out of your wayland session)
2799     # bindsym $mod+Shift+e exit
2800
2801     bindsym $mod+apostrophe exec rofi-light        # rofi-based brightness chooser
2802     bindsym XF86MonBrightnessUp exec light -A 5    # increase screen brightness
2803     bindsym XF86MonBrightnessDown exec light -U 5  # decrease screen brightness
2804
2805     bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
2806     bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
2807     bindsym XF86AudioMute exec pamixer --toggle-mute
2808     bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
2809
2810     bindsym $mod+Shift+apostrophe exec rofi-remmina.py # choose remmina connection
2811
2812     # original sway workspace switch and window move
2813     bindsym $mod+bracketleft workspace prev
2814     bindsym $mod+bracketright workspace next
2815     bindsym $mod+braceleft move container to workspace prev
2816     bindsym $mod+braceright move container to workspace next
2817
2818     # bspwm-esque workspace switch and window move
2819     bindsym $mod2+bracketleft exec sway-ws-util switch prev
2820     bindsym $mod2+bracketright exec sway-ws-util switch next
2821     bindsym $mod2+braceleft exec sway-ws-util move prev follow
2822     bindsym $mod2+braceright exec sway-ws-util move next follow
2823 #
2824 # Moving around:
2825 #
2826     # Move your focus around
2827     bindsym $mod+$left focus left
2828     bindsym $mod+$down focus down
2829     bindsym $mod+$up focus up
2830     bindsym $mod+$right focus right
2831     # or use $mod+[up|down|left|right]
2832     bindsym $mod+Left focus left
2833     bindsym $mod+Down focus down
2834     bindsym $mod+Up focus up
2835     bindsym $mod+Right focus right
2836
2837     # _move_ the focused window with the same, but add Shift
2838     bindsym $mod+Shift+$left move left
2839     bindsym $mod+Shift+$down move down
2840     bindsym $mod+Shift+$up move up
2841     bindsym $mod+Shift+$right move right
2842     # ditto, with arrow keys
2843     bindsym $mod+Shift+Left move left
2844     bindsym $mod+Shift+Down move down
2845     bindsym $mod+Shift+Up move up
2846     bindsym $mod+Shift+Right move right
2847 #
2848 # Workspaces:
2849 #
2850     # switch to workspace
2851     bindsym $mod+1 workspace 1
2852     bindsym $mod+2 workspace 2
2853     bindsym $mod+3 workspace 3
2854     bindsym $mod+4 workspace 4
2855     bindsym $mod+5 workspace 5
2856     bindsym $mod+6 workspace 6
2857     bindsym $mod+7 workspace 7
2858     bindsym $mod+8 workspace 8
2859     bindsym $mod+9 workspace 9
2860     bindsym $mod+0 workspace 10
2861     # move focused container to workspace
2862     bindsym $mod+Shift+1 move container to workspace 1
2863     bindsym $mod+Shift+2 move container to workspace 2
2864     bindsym $mod+Shift+3 move container to workspace 3
2865     bindsym $mod+Shift+4 move container to workspace 4
2866     bindsym $mod+Shift+5 move container to workspace 5
2867     bindsym $mod+Shift+6 move container to workspace 6
2868     bindsym $mod+Shift+7 move container to workspace 7
2869     bindsym $mod+Shift+8 move container to workspace 8
2870     bindsym $mod+Shift+9 move container to workspace 9
2871     bindsym $mod+Shift+0 move container to workspace 10
2872     # Note: workspaces can have any name you want, not just numbers.
2873     # We just use 1-10 as the default.
2874 #
2875 # Layout stuff:
2876 #
2877     # You can "split" the current object of your focus with
2878     # $mod+b or $mod+v, for horizontal and vertical splits
2879     # respectively.
2880     bindsym $mod+b splith
2881     bindsym $mod+v splitv
2882
2883     # Switch the current container between different layout styles
2884     bindsym $mod+s layout stacking
2885     bindsym $mod+w layout tabbed
2886     bindsym $mod+e layout toggle split
2887
2888     # Make the current focus fullscreen
2889     bindsym $mod+f fullscreen
2890
2891     # Toggle sticky-ness of the current (floating) window
2892     bindsym $mod+$mod2+space sticky toggle
2893
2894     # Toggle the current focus between tiling and floating mode
2895     bindsym $mod+Shift+space floating toggle
2896
2897     # Swap focus between the tiling area and the floating area
2898     bindsym $mod+space focus mode_toggle
2899
2900     # move focus to the parent container
2901     bindsym $mod+a focus parent
2902 #
2903 # Scratchpad:
2904 #
2905     # Sway has a "scratchpad", which is a bag of holding for windows.
2906     # You can send windows there and get them back later.
2907
2908     # Move the currently focused window to the scratchpad
2909     bindsym $mod+Shift+minus move scratchpad
2910
2911     # Show the next scratchpad window or hide the focused scratchpad window.
2912     # If there are multiple scratchpad windows, this command cycles through them.
2913     bindsym $mod+minus scratchpad show
2914 #
2915 # Resizing containers:
2916 #
2917 mode "resize" {
2918     # left will shrink the containers width
2919     # right will grow the containers width
2920     # up will shrink the containers height
2921     # down will grow the containers height
2922     bindsym $left resize shrink width 10px
2923     bindsym $down resize grow height 10px
2924     bindsym $up resize shrink height 10px
2925     bindsym $right resize grow width 10px
2926
2927     # ditto, with arrow keys
2928     bindsym Left resize shrink width 10px
2929     bindsym Down resize grow height 10px
2930     bindsym Up resize shrink height 10px
2931     bindsym Right resize grow width 10px
2932
2933     # return to default mode
2934     bindsym Return mode "default"
2935     bindsym Escape mode "default"
2936 }
2937 bindsym $mod+Shift+r mode "resize"
2938
2939 #
2940 # Power button
2941 #
2942
2943 set $mode_system System (l)ock, (e)xit sway, (s)uspend, (h)ibernate, (r)eboot, (S)hutdown
2944 mode "$mode_system" {
2945     bindsym l       exec swaylock,              mode "default"
2946     bindsym e       exec swaymsg exit,          mode "default"
2947     bindsym s       exec systemctl suspend,     mode "default"
2948     bindsym h       exec systemctl hibernate,   mode "default"
2949     bindsym r       exec systemctl reboot,      mode "default"
2950     bindsym Shift+s exec systemctl poweroff -i, mode "default"
2951
2952     # back to normal: Enter, Escape, or q
2953     bindsym Return mode "default"
2954     bindsym Escape mode "default"
2955     bindsym q      mode "default"
2956 }
2957 # bindsym XF86PowerOff mode "$mode_system"
2958 bindsym $mod+Shift+e mode "$mode_system"
2959
2960 #
2961 # Presentation mode
2962 #
2963
2964 bindsym $mod+$mod2+p exec ([ ! -e ~/.nosleep ] && touch ~/.nosleep || rm ~/.nosleep) && killall -USR1 i3status
2965
2966 #
2967 # Notifications
2968 #
2969
2970 bindsym $mod+Shift+n mode notifications
2971 mode notifications {
2972     bindsym Return  exec makoctl invoke; exec makoctl dismiss; mode default
2973     bindsym d       exec makoctl dismiss; mode default
2974     bindsym Shift+d exec makoctl dismiss -a; mode default
2975
2976     bindsym Escape mode default
2977     bindsym q      mode default
2978 }
2979
2980 #
2981 # Screenshotting
2982 #
2983
2984 bindsym $mod+Shift+s mode screenshot
2985 mode screenshot {
2986     bindsym a exec grim $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
2987     bindsym r exec slurp | grim -g - $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
2988
2989     bindsym Escape mode default
2990     bindsym q      mode default
2991 }
2992
2993 #
2994 # Window configurations
2995 #
2996 for_window [class="mpv"] floating enable
2997 for_window [class="TelegramDesktop"] floating enable
2998 for_window [app_id="pavucontrol"] floating enable
2999 for_window [app_id="meld"] floating enable
3000 for_window [app_id="nm-connection-editor"] floating enable
3001
3002 #
3003 # Status Bar:
3004 #
3005 # Read `man 5 sway-bar` for more information about this section.
3006 bar {
3007     position bottom
3008     colors {
3009         statusline #ffffff
3010         background #212121
3011         inactive_workspace #21212100 #21212100 #5c5c5c
3012     }
3013     status_command i3status | my-i3status.py
3014 }
3015
3016 # font pango: benis uushi 9
3017 # font pango: Ubuntu Mono 11
3018 # font pango: Inconsolata 11
3019 font pango: DejaVu Sans Mono 9
3020 # font pango: Liberation Mono 9
3021
3022 exec xrdb .Xresources
3023 # exec pgrep -x "systemd-inhibit" || \
3024 #      systemd-inhibit --what=handle-power-key --who=aminb \
3025 #      --why="Handle power button in sway" sleep infinity
3026 exec mako 2>&1 >/tmp/mako.log
3027 exec /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
3028
3029 include /etc/sway/config.d/*
3030 include ~/.config/sway/`hostname`
3031
3032 exec systemd-notify --ready || true
3033
3034 #+end_src
3035
3036 *** langa
3037 :PROPERTIES:
3038 :header-args+: :tangle ~/.config/sway/langa
3039 :END:
3040
3041 #+begin_src conf
3042 input "2:7:SynPS/2_Synaptics_TouchPad" {
3043     events disabled
3044     dwt enabled
3045     tap enabled
3046     natural_scroll enabled
3047     click_method clickfinger
3048 }
3049
3050 input "1:1:AT_Translated_Set_2_keyboard" {
3051     repeat_delay 200
3052     repeat_rate 45
3053     xkb_layout us_ab,ir
3054     xkb_options ctrl:nocaps,altwin:swap_alt_win,grp:shifts_toggle
3055 }
3056 #+end_src
3057
3058 *** shemshak
3059 :PROPERTIES:
3060 :header-args+: :tangle ~/.config/sway/shemshak
3061 :END:
3062
3063 #+begin_src conf
3064 input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
3065     dwt enabled
3066     tap enabled
3067     natural_scroll enabled
3068     middle_emulation enabled
3069     click_method clickfinger
3070 }
3071
3072 input "1:1:AT_Translated_Set_2_keyboard" {
3073     repeat_delay 200
3074     repeat_rate 45
3075     xkb_layout us,ir
3076     xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
3077 }
3078 #+end_src
3079 ** swaylock
3080 :PROPERTIES:
3081 :header-args+: :tangle ~/.config/swaylock/config
3082 :END:
3083
3084 #+begin_src conf
3085 image=/home/amin/usr/pics/wp/wp2445784-blurred-wallpapers.jpg
3086 scaling=fill
3087 #+end_src
3088 ** systemd
3089
3090 Keep boot messages on tty1 (see [[https://wiki.archlinux.org/index.php/getty#Have_boot_messages_stay_on_tty1][here]])
3091
3092 #+begin_src conf :tangle /sudo::/etc/systemd/system/getty@tty1.service.d/noclear.conf
3093 [Service]
3094 TTYVTDisallocate=no
3095 #+end_src
3096
3097 ** TLP
3098
3099 *** langa
3100
3101 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "langa")) "/sudo::/etc/default/tlp")
3102 # ------------------------------------------------------------------------------
3103 # tlp - Parameters for power saving
3104 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
3105
3106 # Hint: some features are disabled by default, remove the leading # to enable
3107 # them.
3108
3109 # Set to 0 to disable, 1 to enable TLP.
3110 TLP_ENABLE=1
3111
3112 # Operation mode when no power supply can be detected: AC, BAT.
3113 # Concerns some desktop and embedded hardware only.
3114 TLP_DEFAULT_MODE=AC
3115
3116 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
3117 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
3118 TLP_PERSISTENT_DEFAULT=0
3119
3120 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
3121 # Non-zero value enables, zero disables laptop mode.
3122 DISK_IDLE_SECS_ON_AC=0
3123 DISK_IDLE_SECS_ON_BAT=2
3124
3125 # Dirty page values (timeouts in secs).
3126 MAX_LOST_WORK_SECS_ON_AC=15
3127 MAX_LOST_WORK_SECS_ON_BAT=60
3128
3129 # Hint: CPU parameters below are disabled by default, remove the leading #
3130 # to enable them, otherwise kernel default values are used.
3131
3132 # Select a CPU frequency scaling governor.
3133 # Intel Core i processor with intel_pstate driver:
3134 #   powersave(*), performance.
3135 # Older hardware with acpi-cpufreq driver:
3136 #   ondemand(*), powersave, performance, conservative, schedutil.
3137 # (*) is recommended.
3138 # Hint: use tlp-stat -p to show the active driver and available governors.
3139 # Important:
3140 #   powersave for intel_pstate and ondemand for acpi-cpufreq are power
3141 #   efficient for *almost all* workloads and therefore kernel and most
3142 #   distributions have chosen them as defaults. If you still want to change,
3143 #   you should know what you're doing! You *must* disable your distribution's
3144 #   governor settings or conflicts will occur.
3145 #CPU_SCALING_GOVERNOR_ON_AC=powersave
3146 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
3147
3148 # Set the min/max frequency available for the scaling governor.
3149 # Possible values strongly depend on your CPU. For available frequencies see
3150 # the output of tlp-stat -p.
3151 #CPU_SCALING_MIN_FREQ_ON_AC=0
3152 #CPU_SCALING_MAX_FREQ_ON_AC=0
3153 #CPU_SCALING_MIN_FREQ_ON_BAT=0
3154 #CPU_SCALING_MAX_FREQ_ON_BAT=0
3155
3156 # Set energy performance hints (HWP) for Intel P-state governor:
3157 #   performance, balance_performance, default, balance_power, power
3158 # Values are given in order of increasing power saving.
3159 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
3160 CPU_HWP_ON_AC=balance_performance
3161 CPU_HWP_ON_BAT=balance_power
3162
3163 # Set Intel P-state performance: 0..100 (%).
3164 # Limit the max/min P-state to control the power dissipation of the CPU.
3165 # Values are stated as a percentage of the available performance.
3166 # Requires an Intel Core i processor with intel_pstate driver.
3167 #CPU_MIN_PERF_ON_AC=0
3168 #CPU_MAX_PERF_ON_AC=100
3169 #CPU_MIN_PERF_ON_BAT=0
3170 #CPU_MAX_PERF_ON_BAT=30
3171
3172 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
3173 # Requires an Intel Core i processor.
3174 # Important:
3175 # - This may conflict with your distribution's governor settings
3176 # - A value of 1 does *not* activate boosting, it just allows it
3177 #CPU_BOOST_ON_AC=1
3178 #CPU_BOOST_ON_BAT=0
3179
3180 # Minimize number of used CPU cores/hyper-threads under light load conditions:
3181 #   0=disable, 1=enable.
3182 SCHED_POWERSAVE_ON_AC=0
3183 SCHED_POWERSAVE_ON_BAT=1
3184
3185 # Kernel NMI Watchdog:
3186 #   0=disable (default, saves power), 1=enable (for kernel debugging only).
3187 NMI_WATCHDOG=0
3188
3189 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
3190 # Frequency voltage pairs are written to:
3191 #   /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
3192 # CAUTION: only use this, if you thoroughly understand what you are doing!
3193 #PHC_CONTROLS="F:V F:V F:V F:V"
3194
3195 # Set CPU performance versus energy savings policy:
3196 #   performance, balance-performance, default, balance-power, power.
3197 # Values are given in order of increasing power saving.
3198 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
3199 ENERGY_PERF_POLICY_ON_AC=performance
3200 ENERGY_PERF_POLICY_ON_BAT=balance-power
3201
3202 # Disk devices; separate multiple devices with spaces (default: sda).
3203 # Devices can be specified by disk ID also (lookup with: tlp diskid).
3204 DISK_DEVICES="sda sdb"
3205
3206 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
3207 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
3208 # Separate values for multiple disks with spaces. Use the special value 'keep'
3209 # to keep the hardware default for the particular disk.
3210 DISK_APM_LEVEL_ON_AC="254 254"
3211 DISK_APM_LEVEL_ON_BAT="128 128"
3212
3213 # Hard disk spin down timeout:
3214 #   0:        spin down disabled
3215 #   1..240:   timeouts from 5s to 20min (in units of 5s)
3216 #   241..251: timeouts from 30min to 5.5 hours (in units of 30min)
3217 # See 'man hdparm' for details.
3218 # Separate values for multiple disks with spaces. Use the special value 'keep'
3219 # to keep the hardware default for the particular disk.
3220 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
3221 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
3222
3223 # Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
3224 # Separate values for multiple disks with spaces. Use the special value 'keep'
3225 # to keep the kernel default scheduler for the particular disk.
3226 #DISK_IOSCHED="cfq cfq"
3227
3228 # AHCI link power management (ALPM) for disk devices:
3229 #   min_power, med_power_with_dipm(*), medium_power, max_performance.
3230 # (*) Kernel >= 4.15 required, then recommended.
3231 # Multiple values separated with spaces are tried sequentially until success.
3232 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
3233 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
3234
3235 # Exclude host devices from AHCI link power management.
3236 # Separate multiple hosts with spaces.
3237 #SATA_LINKPWR_BLACKLIST="host1"
3238
3239 # Runtime Power Management for AHCI host and disks devices:
3240 #   on=disable, auto=enable.
3241 # EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
3242 #AHCI_RUNTIME_PM_ON_AC=on
3243 #AHCI_RUNTIME_PM_ON_BAT=on
3244
3245 # Seconds of inactivity before disk is suspended.
3246 AHCI_RUNTIME_PM_TIMEOUT=15
3247
3248 # PCI Express Active State Power Management (PCIe ASPM):
3249 #   default, performance, powersave.
3250 PCIE_ASPM_ON_AC=performance
3251 PCIE_ASPM_ON_BAT=powersave
3252
3253 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
3254 # auto = mid on BAT, high on AC; default = use hardware defaults.
3255 RADEON_POWER_PROFILE_ON_AC=high
3256 RADEON_POWER_PROFILE_ON_BAT=low
3257
3258 # Radeon dynamic power management method (DPM): battery, performance.
3259 RADEON_DPM_STATE_ON_AC=performance
3260 RADEON_DPM_STATE_ON_BAT=battery
3261
3262 # Radeon DPM performance level: auto, low, high; auto is recommended.
3263 RADEON_DPM_PERF_LEVEL_ON_AC=auto
3264 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
3265
3266 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
3267 WIFI_PWR_ON_AC=off
3268 WIFI_PWR_ON_BAT=on
3269
3270 # Disable wake on LAN: Y/N.
3271 WOL_DISABLE=Y
3272
3273 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
3274 # A value of 0 disables, >=1 enables power saving (recommended: 1).
3275 SOUND_POWER_SAVE_ON_AC=0
3276 SOUND_POWER_SAVE_ON_BAT=0
3277
3278 # Disable controller too (HDA only): Y/N.
3279 SOUND_POWER_SAVE_CONTROLLER=N
3280
3281 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
3282 # Drive can be powered on again by releasing (and reinserting) the eject lever
3283 # or by pressing the disc eject button on newer models.
3284 # Note: an UltraBay/MediaBay hard disk is never powered off.
3285 BAY_POWEROFF_ON_AC=0
3286 BAY_POWEROFF_ON_BAT=0
3287 # Optical drive device to power off (default sr0).
3288 BAY_DEVICE="sr0"
3289
3290 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
3291 RUNTIME_PM_ON_AC=on
3292 RUNTIME_PM_ON_BAT=auto
3293
3294 # Exclude PCI(e) device adresses the following list from Runtime PM
3295 # (separate with spaces). Use lspci to get the adresses (1st column).
3296 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
3297
3298 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
3299 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
3300 # prevents accidential power-on of dGPU in hybrid graphics setups.
3301 # Use "" to disable the feature completely.
3302 # Separate multiple drivers with spaces.
3303 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
3304
3305 # Set to 0 to disable, 1 to enable USB autosuspend feature.
3306 USB_AUTOSUSPEND=1
3307
3308 # Exclude listed devices from USB autosuspend (separate with spaces).
3309 # Use lsusb to get the ids.
3310 # Note: input devices (usbhid) are excluded automatically
3311 #USB_BLACKLIST="1111:2222 3333:4444"
3312
3313 # Bluetooth devices are excluded from USB autosuspend:
3314 #   0=do not exclude, 1=exclude.
3315 USB_BLACKLIST_BTUSB=0
3316
3317 # Phone devices are excluded from USB autosuspend:
3318 #   0=do not exclude, 1=exclude (enable charging).
3319 USB_BLACKLIST_PHONE=0
3320
3321 # Printers are excluded from USB autosuspend:
3322 #   0=do not exclude, 1=exclude.
3323 USB_BLACKLIST_PRINTER=1
3324
3325 # WWAN devices are excluded from USB autosuspend:
3326 #   0=do not exclude, 1=exclude.
3327 USB_BLACKLIST_WWAN=1
3328
3329 # Include listed devices into USB autosuspend even if already excluded
3330 # by the blacklists above (separate with spaces).
3331 # Use lsusb to get the ids.
3332 #USB_WHITELIST="1111:2222 3333:4444"
3333
3334 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
3335 # (workaround for USB devices that cause shutdown problems).
3336 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
3337
3338 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
3339 # on system startup: 0=disable, 1=enable.
3340 # Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
3341 #   are ignored when this is enabled!
3342 #RESTORE_DEVICE_STATE_ON_STARTUP=0
3343 RESTORE_DEVICE_STATE_ON_STARTUP=0
3344
3345 # Radio devices to disable on startup: bluetooth, wifi, wwan.
3346 # Separate multiple devices with spaces.
3347 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
3348 DEVICES_TO_DISABLE_ON_STARTUP="bluetooth"
3349
3350 # Radio devices to enable on startup: bluetooth, wifi, wwan.
3351 # Separate multiple devices with spaces.
3352 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
3353
3354 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
3355 # (workaround for devices that are blocking shutdown).
3356 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
3357
3358 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
3359 # (to prevent other operating systems from missing radios).
3360 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
3361
3362 # Radio devices to enable on AC: bluetooth, wifi, wwan.
3363 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
3364
3365 # Radio devices to disable on battery: bluetooth, wifi, wwan.
3366 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
3367
3368 # Radio devices to disable on battery when not in use (not connected):
3369 #   bluetooth, wifi, wwan.
3370 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
3371
3372 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
3373 # required). Charging starts when the remaining capacity falls below the
3374 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
3375 # Main / Internal battery (values in %)
3376 #START_CHARGE_THRESH_BAT0=75
3377 #STOP_CHARGE_THRESH_BAT0=80
3378 # Ultrabay / Slice / Replaceable battery (values in %)
3379 #START_CHARGE_THRESH_BAT1=75
3380 #STOP_CHARGE_THRESH_BAT1=80
3381
3382 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
3383 #RESTORE_THRESHOLDS_ON_BAT=1
3384
3385 # ------------------------------------------------------------------------------
3386 # tlp-rdw - Parameters for the radio device wizard
3387 # Possible devices: bluetooth, wifi, wwan.
3388
3389 # Hints:
3390 # - Parameters are disabled by default, remove the leading # to enable them
3391 # - Separate multiple radio devices with spaces
3392
3393 # Radio devices to disable on connect.
3394 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
3395 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
3396 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
3397
3398 # Radio devices to enable on disconnect.
3399 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
3400 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
3401 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
3402
3403 # Radio devices to enable/disable when docked.
3404 #DEVICES_TO_ENABLE_ON_DOCK=""
3405 #DEVICES_TO_DISABLE_ON_DOCK=""
3406
3407 # Radio devices to enable/disable when undocked.
3408 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
3409 #DEVICES_TO_DISABLE_ON_UNDOCK=""
3410 #+end_src
3411
3412 *** shemshak
3413
3414 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "shemshak")) "/sudo::/etc/default/tlp")
3415 # ------------------------------------------------------------------------------
3416 # tlp - Parameters for power saving
3417 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
3418
3419 # Hint: some features are disabled by default, remove the leading # to enable
3420 # them.
3421
3422 # Set to 0 to disable, 1 to enable TLP.
3423 TLP_ENABLE=1
3424
3425 # Operation mode when no power supply can be detected: AC, BAT.
3426 # Concerns some desktop and embedded hardware only.
3427 TLP_DEFAULT_MODE=AC
3428
3429 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
3430 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
3431 TLP_PERSISTENT_DEFAULT=0
3432
3433 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
3434 # Non-zero value enables, zero disables laptop mode.
3435 DISK_IDLE_SECS_ON_AC=0
3436 DISK_IDLE_SECS_ON_BAT=2
3437
3438 # Dirty page values (timeouts in secs).
3439 MAX_LOST_WORK_SECS_ON_AC=15
3440 MAX_LOST_WORK_SECS_ON_BAT=60
3441
3442 # Hint: CPU parameters below are disabled by default, remove the leading #
3443 # to enable them, otherwise kernel default values are used.
3444
3445 # Select a CPU frequency scaling governor.
3446 # Intel Core i processor with intel_pstate driver:
3447 #   powersave(*), performance.
3448 # Older hardware with acpi-cpufreq driver:
3449 #   ondemand(*), powersave, performance, conservative, schedutil.
3450 # (*) is recommended.
3451 # Hint: use tlp-stat -p to show the active driver and available governors.
3452 # Important:
3453 #   powersave for intel_pstate and ondemand for acpi-cpufreq are power
3454 #   efficient for *almost all* workloads and therefore kernel and most
3455 #   distributions have chosen them as defaults. If you still want to change,
3456 #   you should know what you're doing! You *must* disable your distribution's
3457 #   governor settings or conflicts will occur.
3458 #CPU_SCALING_GOVERNOR_ON_AC=powersave
3459 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
3460
3461 # Set the min/max frequency available for the scaling governor.
3462 # Possible values strongly depend on your CPU. For available frequencies see
3463 # the output of tlp-stat -p.
3464 #CPU_SCALING_MIN_FREQ_ON_AC=0
3465 #CPU_SCALING_MAX_FREQ_ON_AC=0
3466 #CPU_SCALING_MIN_FREQ_ON_BAT=0
3467 #CPU_SCALING_MAX_FREQ_ON_BAT=0
3468
3469 # Set energy performance hints (HWP) for Intel P-state governor:
3470 #   performance, balance_performance, default, balance_power, power
3471 # Values are given in order of increasing power saving.
3472 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
3473 CPU_HWP_ON_AC=balance_performance
3474 CPU_HWP_ON_BAT=balance_power
3475
3476 # Set Intel P-state performance: 0..100 (%).
3477 # Limit the max/min P-state to control the power dissipation of the CPU.
3478 # Values are stated as a percentage of the available performance.
3479 # Requires an Intel Core i processor with intel_pstate driver.
3480 #CPU_MIN_PERF_ON_AC=0
3481 #CPU_MAX_PERF_ON_AC=100
3482 #CPU_MIN_PERF_ON_BAT=0
3483 #CPU_MAX_PERF_ON_BAT=30
3484
3485 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
3486 # Requires an Intel Core i processor.
3487 # Important:
3488 # - This may conflict with your distribution's governor settings
3489 # - A value of 1 does *not* activate boosting, it just allows it
3490 #CPU_BOOST_ON_AC=1
3491 #CPU_BOOST_ON_BAT=0
3492
3493 # Minimize number of used CPU cores/hyper-threads under light load conditions:
3494 #   0=disable, 1=enable.
3495 SCHED_POWERSAVE_ON_AC=0
3496 SCHED_POWERSAVE_ON_BAT=1
3497
3498 # Kernel NMI Watchdog:
3499 #   0=disable (default, saves power), 1=enable (for kernel debugging only).
3500 NMI_WATCHDOG=0
3501
3502 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
3503 # Frequency voltage pairs are written to:
3504 #   /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
3505 # CAUTION: only use this, if you thoroughly understand what you are doing!
3506 #PHC_CONTROLS="F:V F:V F:V F:V"
3507
3508 # Set CPU performance versus energy savings policy:
3509 #   performance, balance-performance, default, balance-power, power.
3510 # Values are given in order of increasing power saving.
3511 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
3512 ENERGY_PERF_POLICY_ON_AC=performance
3513 ENERGY_PERF_POLICY_ON_BAT=balance-power
3514
3515 # Disk devices; separate multiple devices with spaces (default: sda).
3516 # Devices can be specified by disk ID also (lookup with: tlp diskid).
3517 DISK_DEVICES="sda sdb"
3518
3519 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
3520 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
3521 # Separate values for multiple disks with spaces. Use the special value 'keep'
3522 # to keep the hardware default for the particular disk.
3523 DISK_APM_LEVEL_ON_AC="254 254"
3524 DISK_APM_LEVEL_ON_BAT="128 128"
3525
3526 # Hard disk spin down timeout:
3527 #   0:        spin down disabled
3528 #   1..240:   timeouts from 5s to 20min (in units of 5s)
3529 #   241..251: timeouts from 30min to 5.5 hours (in units of 30min)
3530 # See 'man hdparm' for details.
3531 # Separate values for multiple disks with spaces. Use the special value 'keep'
3532 # to keep the hardware default for the particular disk.
3533 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
3534 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
3535
3536 # Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
3537 # Separate values for multiple disks with spaces. Use the special value 'keep'
3538 # to keep the kernel default scheduler for the particular disk.
3539 #DISK_IOSCHED="cfq cfq"
3540
3541 # AHCI link power management (ALPM) for disk devices:
3542 #   min_power, med_power_with_dipm(*), medium_power, max_performance.
3543 # (*) Kernel >= 4.15 required, then recommended.
3544 # Multiple values separated with spaces are tried sequentially until success.
3545 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
3546 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
3547
3548 # Exclude host devices from AHCI link power management.
3549 # Separate multiple hosts with spaces.
3550 #SATA_LINKPWR_BLACKLIST="host1"
3551
3552 # Runtime Power Management for AHCI host and disks devices:
3553 #   on=disable, auto=enable.
3554 # EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
3555 #AHCI_RUNTIME_PM_ON_AC=on
3556 #AHCI_RUNTIME_PM_ON_BAT=on
3557
3558 # Seconds of inactivity before disk is suspended.
3559 AHCI_RUNTIME_PM_TIMEOUT=15
3560
3561 # PCI Express Active State Power Management (PCIe ASPM):
3562 #   default, performance, powersave.
3563 PCIE_ASPM_ON_AC=performance
3564 PCIE_ASPM_ON_BAT=powersave
3565
3566 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
3567 # auto = mid on BAT, high on AC; default = use hardware defaults.
3568 RADEON_POWER_PROFILE_ON_AC=high
3569 RADEON_POWER_PROFILE_ON_BAT=low
3570
3571 # Radeon dynamic power management method (DPM): battery, performance.
3572 RADEON_DPM_STATE_ON_AC=performance
3573 RADEON_DPM_STATE_ON_BAT=battery
3574
3575 # Radeon DPM performance level: auto, low, high; auto is recommended.
3576 RADEON_DPM_PERF_LEVEL_ON_AC=auto
3577 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
3578
3579 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
3580 WIFI_PWR_ON_AC=off
3581 WIFI_PWR_ON_BAT=on
3582
3583 # Disable wake on LAN: Y/N.
3584 WOL_DISABLE=Y
3585
3586 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
3587 # A value of 0 disables, >=1 enables power saving (recommended: 1).
3588 SOUND_POWER_SAVE_ON_AC=0
3589 SOUND_POWER_SAVE_ON_BAT=0
3590
3591 # Disable controller too (HDA only): Y/N.
3592 SOUND_POWER_SAVE_CONTROLLER=N
3593
3594 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
3595 # Drive can be powered on again by releasing (and reinserting) the eject lever
3596 # or by pressing the disc eject button on newer models.
3597 # Note: an UltraBay/MediaBay hard disk is never powered off.
3598 BAY_POWEROFF_ON_AC=0
3599 BAY_POWEROFF_ON_BAT=0
3600 # Optical drive device to power off (default sr0).
3601 BAY_DEVICE="sr0"
3602
3603 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
3604 RUNTIME_PM_ON_AC=on
3605 RUNTIME_PM_ON_BAT=auto
3606
3607 # Exclude PCI(e) device adresses the following list from Runtime PM
3608 # (separate with spaces). Use lspci to get the adresses (1st column).
3609 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
3610 RUNTIME_PM_BLACKLIST="01:00.0"
3611
3612 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
3613 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
3614 # prevents accidential power-on of dGPU in hybrid graphics setups.
3615 # Use "" to disable the feature completely.
3616 # Separate multiple drivers with spaces.
3617 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
3618
3619 # Set to 0 to disable, 1 to enable USB autosuspend feature.
3620 USB_AUTOSUSPEND=1
3621
3622 # Exclude listed devices from USB autosuspend (separate with spaces).
3623 # Use lsusb to get the ids.
3624 # Note: input devices (usbhid) are excluded automatically
3625 #USB_BLACKLIST="1111:2222 3333:4444"
3626
3627 # Bluetooth devices are excluded from USB autosuspend:
3628 #   0=do not exclude, 1=exclude.
3629 USB_BLACKLIST_BTUSB=0
3630
3631 # Phone devices are excluded from USB autosuspend:
3632 #   0=do not exclude, 1=exclude (enable charging).
3633 USB_BLACKLIST_PHONE=0
3634
3635 # Printers are excluded from USB autosuspend:
3636 #   0=do not exclude, 1=exclude.
3637 USB_BLACKLIST_PRINTER=1
3638
3639 # WWAN devices are excluded from USB autosuspend:
3640 #   0=do not exclude, 1=exclude.
3641 USB_BLACKLIST_WWAN=1
3642
3643 # Include listed devices into USB autosuspend even if already excluded
3644 # by the blacklists above (separate with spaces).
3645 # Use lsusb to get the ids.
3646 #USB_WHITELIST="1111:2222 3333:4444"
3647
3648 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
3649 # (workaround for USB devices that cause shutdown problems).
3650 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
3651
3652 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
3653 # on system startup: 0=disable, 1=enable.
3654 # Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
3655 #   are ignored when this is enabled!
3656 #RESTORE_DEVICE_STATE_ON_STARTUP=0
3657 RESTORE_DEVICE_STATE_ON_STARTUP=1
3658
3659 # Radio devices to disable on startup: bluetooth, wifi, wwan.
3660 # Separate multiple devices with spaces.
3661 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
3662
3663 # Radio devices to enable on startup: bluetooth, wifi, wwan.
3664 # Separate multiple devices with spaces.
3665 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
3666
3667 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
3668 # (workaround for devices that are blocking shutdown).
3669 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
3670
3671 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
3672 # (to prevent other operating systems from missing radios).
3673 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
3674
3675 # Radio devices to enable on AC: bluetooth, wifi, wwan.
3676 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
3677
3678 # Radio devices to disable on battery: bluetooth, wifi, wwan.
3679 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
3680
3681 # Radio devices to disable on battery when not in use (not connected):
3682 #   bluetooth, wifi, wwan.
3683 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
3684
3685 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
3686 # required). Charging starts when the remaining capacity falls below the
3687 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
3688 # Main / Internal battery (values in %)
3689 #START_CHARGE_THRESH_BAT0=75
3690 #STOP_CHARGE_THRESH_BAT0=80
3691 # Ultrabay / Slice / Replaceable battery (values in %)
3692 #START_CHARGE_THRESH_BAT1=75
3693 #STOP_CHARGE_THRESH_BAT1=80
3694
3695 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
3696 #RESTORE_THRESHOLDS_ON_BAT=1
3697
3698 # ------------------------------------------------------------------------------
3699 # tlp-rdw - Parameters for the radio device wizard
3700 # Possible devices: bluetooth, wifi, wwan.
3701
3702 # Hints:
3703 # - Parameters are disabled by default, remove the leading # to enable them
3704 # - Separate multiple radio devices with spaces
3705
3706 # Radio devices to disable on connect.
3707 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
3708 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
3709 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
3710
3711 # Radio devices to enable on disconnect.
3712 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
3713 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
3714 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
3715
3716 # Radio devices to enable/disable when docked.
3717 #DEVICES_TO_ENABLE_ON_DOCK=""
3718 #DEVICES_TO_DISABLE_ON_DOCK=""
3719
3720 # Radio devices to enable/disable when undocked.
3721 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
3722 #DEVICES_TO_DISABLE_ON_UNDOCK=""
3723 #+end_src
3724
3725 ** X
3726
3727 *** xprofile
3728 :PROPERTIES:
3729 :header-args+: :tangle ~/.xprofile
3730 :END:
3731
3732 =~/.xprofile= is similar in style to =~/.xinitrc=, but on the
3733 contrary, it's automatically sourced by LightDM, my display manager of
3734 choice.
3735
3736 #+begin_src sh :tangle no
3737 xset -b  # disable bell
3738 xset r rate 200 45  # repeat delay (ms) and rate (repeats/sec)
3739
3740 # setxkbmap -option compose:ralt
3741
3742 setxkbmap -option ctrl:nocaps          # turn capslock into control
3743 setxkbmap -option altwin:swap_alt_win  # swap alt and super
3744
3745 if [ $(hostname) = "plasma" ]
3746 then
3747     setxkbmap -option ctrl:rctrl_ralt  # turn right control into right alt
3748 fi
3749
3750 if [ $(hostname) = "enigma" ]
3751 then
3752     xmodmap -e "keycode 135 = Alt_R"  # remap menu key to alt
3753 fi
3754
3755 light -Scrs "intel_backlight" 2
3756
3757 source $HOME/.zprofile
3758
3759 export _JAVA_AWT_WM_NONREPARENTING=1
3760 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
3761
3762 if [ $(hostname) = "plasma" ]
3763 then
3764     unlock-def-gk.py &
3765 fi
3766
3767 bspwm &
3768 #+end_src
3769
3770 *** X resources
3771
3772 **** Xresources
3773 :PROPERTIES:
3774 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
3775 :END:
3776
3777 #+begin_src conf-xdefaults
3778 #include ".Xresources.d/fonts"
3779 ! #include ".Xresources.d/colors"
3780 #include ".Xresources.d/emacs"
3781 #include ".Xresources.d/rxvt-unicode"
3782 #+end_src
3783
3784 **** Xresources.d
3785
3786 ***** fonts
3787 :PROPERTIES:
3788 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
3789 :END:
3790
3791 #+begin_src conf-xdefaults
3792 Xft.lcdfilter: lcddefault
3793 Xft.antialias: true
3794 Xft.autohint: 0
3795 Xft.hinting: true
3796 Xft.hintstyle: hintslight
3797 ! Xft.hintstyle: hintfull
3798 Xft.rgba: rgb
3799 Xft.dpi: 96
3800 #+end_src
3801
3802 ***** colors
3803 :PROPERTIES:
3804 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
3805 :END:
3806
3807 #+begin_src conf-xdefaults :tangle no
3808 #include "gruvbox-light.xresources"
3809 ! #include "gruvbox-dark.xresources"
3810 #include "gruvbox-urxvt256.xresources"
3811 #+end_src
3812
3813 #+begin_src conf-xdefaults :tangle no
3814 ! -----------------------------------------------------------------------------
3815 ! File: gruvbox-light.xresources
3816 ! Description: Retro groove colorscheme generalized
3817 ! Author: morhetz <morhetz@gmail.com>
3818 ! Source: https://github.com/morhetz/gruvbox-generalized
3819 ! Last Modified: 6 Sep 2014
3820 ! -----------------------------------------------------------------------------
3821
3822 ! hard contrast: *background: #f9f5d7
3823 *background: #fbf1c7
3824 ! soft contrast: *background: #f2e5bc
3825 *foreground: #3c3836
3826 ! Black + DarkGrey
3827 *color0:  #fdf4c1
3828 *color8:  #928374
3829 ! DarkRed + Red
3830 *color1:  #cc241d
3831 *color9:  #9d0006
3832 ! DarkGreen + Green
3833 *color2:  #98971a
3834 *color10: #79740e
3835 ! DarkYellow + Yellow
3836 *color3:  #d79921
3837 *color11: #b57614
3838 ! DarkBlue + Blue
3839 *color4:  #458588
3840 *color12: #076678
3841 ! DarkMagenta + Magenta
3842 *color5:  #b16286
3843 *color13: #8f3f71
3844 ! DarkCyan + Cyan
3845 *color6:  #689d6a
3846 *color14: #427b58
3847 ! LightGrey + White
3848 *color7:  #7c6f64
3849 *color15: #3c3836
3850 #+end_src
3851
3852 #+begin_src conf-xdefaults :tangle no
3853 ! -----------------------------------------------------------------------------
3854 ! File: gruvbox-dark.xresources
3855 ! Description: Retro groove colorscheme generalized
3856 ! Author: morhetz <morhetz@gmail.com>
3857 ! Source: https://github.com/morhetz/gruvbox-generalized
3858 ! Last Modified: 6 Sep 2014
3859 ! -----------------------------------------------------------------------------
3860
3861 ! hard contrast: *background: #1d2021
3862 *background: #282828
3863 ! soft contrast: *background: #32302f
3864 *foreground: #ebdbb2
3865 ! Black + DarkGrey
3866 *color0:  #282828
3867 *color8:  #928374
3868 ! DarkRed + Red
3869 *color1:  #cc241d
3870 *color9:  #fb4934
3871 ! DarkGreen + Green
3872 *color2:  #98971a
3873 *color10: #b8bb26
3874 ! DarkYellow + Yellow
3875 *color3:  #d79921
3876 *color11: #fabd2f
3877 ! DarkBlue + Blue
3878 *color4:  #458588
3879 *color12: #83a598
3880 ! DarkMagenta + Magenta
3881 *color5:  #b16286
3882 *color13: #d3869b
3883 ! DarkCyan + Cyan
3884 *color6:  #689d6a
3885 *color14: #8ec07c
3886 ! LightGrey + White
3887 *color7:  #a89984
3888 *color15: #ebdbb2
3889 #+end_src
3890
3891 #+begin_src conf-xdefaults :tangle no
3892 ! -----------------------------------------------------------------------------
3893 ! File: gruvbox-urxvt256.xresources
3894 ! Description: Retro groove colorscheme generalized
3895 ! Author: morhetz <morhetz@gmail.com>
3896 ! Source: https://github.com/morhetz/gruvbox-generalized
3897 ! Last Modified: 13 Dec 2013
3898 ! -----------------------------------------------------------------------------
3899
3900 URxvt.color24:  #076678
3901 URxvt.color66:  #427b58
3902 URxvt.color88:  #9d0006
3903 URxvt.color96:  #8f3f71
3904 URxvt.color100: #79740e
3905 URxvt.color108: #8ec07c
3906 URxvt.color109: #83a598
3907 URxvt.color130: #af3a03
3908 URxvt.color136: #b57614
3909 URxvt.color142: #b8bb26
3910 URxvt.color167: #fb4934
3911 URxvt.color175: #d3869b
3912 URxvt.color208: #fe8019
3913 URxvt.color214: #fabd2f
3914 URxvt.color223: #ebdbb2
3915 URxvt.color228: #f2e5bc
3916 URxvt.color229: #fbf1c7
3917 URxvt.color230: #f9f5d7
3918 URxvt.color234: #1d2021
3919 URxvt.color235: #282828
3920 URxvt.color236: #32302f
3921 URxvt.color237: #3c3836
3922 URxvt.color239: #504945
3923 URxvt.color241: #665c54
3924 URxvt.color243: #7c6f64
3925 URxvt.color244: #928374
3926 URxvt.color245: #928374
3927 URxvt.color246: #a89984
3928 URxvt.color248: #bdae93
3929 URxvt.color250: #d5c4a1
3930 #+end_src
3931
3932 ***** emacs
3933 :PROPERTIES:
3934 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
3935 :END:
3936
3937 #+begin_src conf-xdefaults
3938 Emacs.menuBar: off
3939 Emacs.toolBar: off
3940 Emacs.verticalScrollBars: off
3941 Emacs.cursorBlink: off
3942 Emacs.FontBackend: xft,x
3943 ! Emacs.font: Ubuntu Mono-12
3944 ! Emacs.font: Triplicate T4C-11
3945 ! Emacs.font: Ubuntu Mono-10.5
3946 ! Emacs.font: Ubuntu Mono-12
3947 ! Emacs.font: Iosevka-11
3948
3949 ! Emacs.font: Fira Mono:size=15
3950 ! Emacs.font: DejaVu Sans Mono:size=15
3951 ! Emacs.font: Inconsolata:size=17
3952 ! Emacs.font: Inconsolata:size=16
3953 ! Emacs.font: Inconsolata LGC:size=14
3954 ! Emacs.font: Source Code Pro Medium-10.5
3955 Emacs.font: Source Code Pro:size=14
3956 ! Emacs.font: Ubuntu Mono:size=16
3957 ! Emacs.font: Iosevka:size=16
3958 #+end_src
3959
3960 ***** rxvt-unicode
3961 :PROPERTIES:
3962 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
3963 :END:
3964
3965 #+begin_src conf-xdefaults
3966 ! Font
3967 URxvt.font:             xft:source code pro:pixelsize=14:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
3968 URxvt.boldFont:         xft:source code pro:semibold:pixelsize=14:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
3969 URxvt.italicFont:       xft:source code pro:italic:pixelsize=14:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
3970 URxvt.bolditalicFont:   xft:source code pro:semibold:italic:pixelsize=14:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
3971
3972 URxvt.xftAntialias:     true
3973 URxvt.letterSpace:      0
3974
3975 URxvt.depth:                0
3976 URxvt.loginShell:           true
3977 URxvt.saveLines:            100000
3978 URxvt.internalBorder:       3
3979 URxvt.lineSpace:            0
3980 URxvt.scrollBar:            false
3981 URxvt.scrollStyle:          rxvt
3982 URxvt*scrollTtyOutput:      false
3983 URxvt*scrollWithBuffer:     true
3984 URxvt*scrollTtyKeypress:    true
3985 URxvt.keysym.Shift-Up:      command:\033]720;1\007
3986 URxvt.keysym.Shift-Down:    command:\033]721;1\007
3987
3988 URxvt.perl-ext-common:      default,clipboard,url-select,keyboard-select
3989 URxvt.url-select.launcher:  firefox
3990 URxvt.url-select.underline: true
3991 URxvt.keysym.M-u:           perl:url-select:select_next
3992 URxvt.keysym.M-Escape:      perl:keyboard-select:activate
3993 URxvt.keysym.M-s:           perl:keyboard-select:search
3994 URxvt.url-launcher:         /usr/bin/firefox
3995 URxvt.matcher.button:       1
3996 URxvt.iso14755:             false
3997 URxvt.iso14755_53:          false
3998 URxvt.keysym.M-c:           perl:clipboard:copy
3999 URxvt.keysym.M-v:           perl:clipboard:paste
4000 URxvt.keysym.C-A-V:         perl:clipboard:paste_escaped
4001 URxvt.keysym.C-Up:          font-size:increase
4002 URxvt.keysym.C-Down:        font-size:decrease
4003 URxvt.keysym.C-S-Up:        font-size:incglobal
4004 URxvt.keysym.C-S-Down:      font-size:decglobal
4005 URxvt.keysym.C-equal:       font-size:reset
4006 !URxvt.keysym.C-question:   font-size:show
4007
4008 URxvt.iconFile:             /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
4009
4010 !urxvt*foreground: white
4011 !urxvt*background: black
4012
4013 !*color0:  #2E3436
4014 !*color1:  #a40000
4015 !*color2:  #4E9A06
4016 !*color3:  #C4A000
4017 !*color4:  #3465A4
4018 !*color5:  #75507B
4019 !*color6:  #ce5c00
4020 !*color7:  #babdb9
4021 !*color8:  #555753
4022 !*color9:  #EF2929
4023 !*color10: #8AE234
4024 !*color11: #FCE94F
4025 !*color12: #729FCF
4026 !*color13: #AD7FA8
4027 !*color14: #fcaf3e
4028 !*color15: #EEEEEC
4029
4030 !URxvt.foreground: #C8C8C8
4031 !URxvt.background: #FFFFFF
4032
4033 !! black
4034 !*color0:  #2E3436
4035 !*color8:  #555753
4036 !! red
4037 !*color1:  #a40000
4038 !*color9:  #EF2929
4039 !! green
4040 !*color2:  #4E9A06
4041 !*color10: #8AE234
4042 !! yellow
4043 !*color3:  #C4A000
4044 !*color11: #FCE94F
4045 !! blue
4046 !*color4:  #3465A4
4047 !*color12: #729FCF
4048 !! purple
4049 !*color5:  #75507B
4050 !*color13: #AD7FA8
4051 !! orange (replaces cyan)
4052 !*color6:  #ce5c00
4053 !*color14: #fcaf3e
4054 !! white
4055 !*color7:  #babdb9
4056 !*color15: #EEEEEC
4057
4058 ! Tango colour theme for rxvt-unicode
4059 URxvt.background: #FFFFFF
4060 URxvt.foreground: #000000
4061
4062 ! Black
4063 URxvt.color0: #2E3436
4064 URxvt.color8: #757773
4065
4066 ! Red
4067 URxvt.color1: #CC0000
4068 URxvt.color9: #EF2929
4069
4070 ! Green
4071 URxvt.color2: #4E9A06
4072 URxvt.color10: #8AE234
4073
4074 ! Yellow
4075 URxvt.color3: #C4A000
4076 URxvt.color11: #FCE94F
4077
4078 ! Blue
4079 URxvt.color4: #3465A4
4080 URxvt.color12: #729FCF
4081
4082 ! Magenta
4083 URxvt.color5: #75507B
4084 URxvt.color13: #AD7FA8
4085
4086 !! Cyan
4087 !URxvt.color6: #06989A
4088 !URxvt.color14: #34E2E2
4089 ! orange (replaces cyan)
4090 ,*color6:  #ce5c00
4091 ,*color14: #fcaf3e
4092
4093 ! White
4094 URxvt.color7: #D3D7CF
4095 URxvt.color15: #EEEEEC
4096 #+end_src
4097
4098 *** xkb us_ab keyboard layout
4099
4100 #+begin_src conf :tangle "/sudo::/usr/share/X11/xkb/symbols/us_ab" :comments none
4101 default partial alphanumeric_keys
4102 xkb_symbols "us_ab" {
4103     include "us(basic)"
4104     name[Group1]= "English (US)(aminb)";
4105
4106     key <MENU> { [ Alt_R ] };
4107 };
4108 #+end_src
4109
4110 ** XDG
4111 :PROPERTIES:
4112 :header-args+: :tangle ~/.config/user-dirs.dirs
4113 :END:
4114
4115 #+begin_src conf
4116 XDG_DESKTOP_DIR="$HOME/Desktop"
4117 XDG_DOCUMENTS_DIR="$HOME/usr/docs"
4118 XDG_DOWNLOAD_DIR="$HOME/usr/dls"
4119 XDG_MUSIC_DIR="$HOME/usr/music"
4120 XDG_PICTURES_DIR="$HOME/usr/pics"
4121 XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
4122 XDG_TEMPLATES_DIR="$HOME/usr/Templates"
4123 XDG_VIDEOS_DIR="$HOME/usr/vids"
4124 #+end_src
4125
4126 ** Zathura
4127 :PROPERTIES:
4128 :header-args+: :tangle ~/.config/zathura/zathurarc
4129 :END:
4130
4131 #+begin_src conf
4132 set smooth-scroll true
4133 set selection-clipboard clipboard
4134 set zoom-step 05
4135 set default-bg "#272727"
4136 set statusbar-bg "#272727"
4137 set inputbar-bg "#373737"
4138 #+end_src
4139
4140 ** Zsh
4141
4142 My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
4143 [[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
4144 installed.
4145
4146 *** zimrc
4147 :PROPERTIES:
4148 :header-args+: :tangle ~/.zimrc
4149 :END:
4150
4151 #+begin_src sh
4152 #################
4153 # CORE SETTINGS #
4154 #################
4155
4156 #
4157 # Zim settings
4158 #
4159
4160 # Select what modules you would like enabled.
4161 # The second line of modules may depend on options set by modules in the first
4162 # line. These dependencies are noted on the respective module's README.md.
4163 zmodules=(directory environment git git-info history input ssh utility custom \
4164           syntax-highlighting history-substring-search prompt completion)
4165
4166
4167 ###################
4168 # MODULE SETTINGS #
4169 ###################
4170
4171 #
4172 # Prompt
4173 #
4174
4175 # Set your desired prompt here
4176 zprompt_theme='pure'
4177 #PURE_PROMPT_SYMBOL=λ
4178 #PURE_PROMPT_SYMBOL=δ
4179 PURE_PROMPT_SYMBOL=➜
4180
4181 #
4182 # Completion
4183 #
4184
4185 # set an optional host-specific filename for the completion cache file
4186 # if none is provided, the default '.zcompdump' is used.
4187 #zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
4188
4189 #
4190 # Utility
4191 #
4192
4193 # Uncomment to enable command correction prompts
4194 # See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
4195 setopt CORRECT
4196
4197 #
4198 # Environment
4199 #
4200
4201 # Set the string below to the desired terminal title format string.
4202 # The terminal title is redrawn upon directory change, however, variables like
4203 # ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
4204 #   http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
4205 # The example below uses the following format: 'username@host:/current/directory'
4206 ztermtitle='%n@%m:%~'
4207
4208 #
4209 # Input
4210 #
4211
4212 # Uncomment to enable double-dot expansion.
4213 # This appends '../' to your input for each '.' you type after an initial '..'
4214 #zdouble_dot_expand='true'
4215
4216 #
4217 # Syntax-Highlighting
4218 #
4219
4220 # This determines what highlighters will be used with the syntax-highlighting module.
4221 # Documentation of the highlighters can be found here:
4222 #   https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
4223 # For (u)rxvt, termite and gnome-terminal users,
4224 # removing the 'cursor' highlighter will fix the disappearing cursor problem
4225 #zhighlighters=(main brackets cursor)
4226 zhighlighters=(main brackets pattern)
4227
4228 #
4229 # SSH
4230 #
4231
4232 # Load these ssh identities with the ssh module
4233 zssh_ids=(id_ed25519_bandali)
4234
4235 #
4236 # Pacman
4237 #
4238
4239 # Set (optional) pacman front-end.
4240 zpacman_frontend='yay'
4241
4242 # Load any helper scripts as defined here
4243 #zpacman_helper=(aur)
4244
4245
4246 #+end_src
4247
4248 *** zlogin
4249 :PROPERTIES:
4250 :header-args+: :tangle ~/.zlogin
4251 :END:
4252
4253 #+begin_src sh
4254 #
4255 # User configuration sourced by login shells
4256 #
4257
4258 # Initialize zim
4259 [[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
4260
4261 #+end_src
4262
4263 *** zprofile
4264 :PROPERTIES:
4265 :header-args+: :tangle ~/.zprofile
4266 :END:
4267
4268 #+begin_src sh
4269 #PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
4270 #PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
4271 export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
4272 export XDG_CONFIG_HOME=$HOME/.config
4273 export XDG_DATA_HOME=$HOME/.local/share
4274 export XDG_DATA_DIRS=/usr/local/share:/usr/share
4275 export MAILDIR="$HOME/mail"
4276 export CVS_RSH=ssh
4277 #export MATHMODELS=$HOME/src/eiffel/mathmodels
4278 #export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
4279 #export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
4280
4281 # Eiffel2Java stuff
4282 #export JAVA_HOME=/usr/lib/jvm/default
4283 #export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
4284 #export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4285 #export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4286
4287 #export PATH="$HOME/usr/build/pvs:$PATH"
4288 #export SBCLISP_HOME=/usr/share/sbcl-source
4289 #export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
4290
4291 export MOZ_USE_XINPUT2=1  # precise scrolling in firefox
4292
4293 #export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
4294 #export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
4295
4296 export NIXPKGS=$HOME/src/git/nixpkgs
4297
4298 if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
4299
4300 export GUIX_LOCPATH="$HOME/.guix-profile/lib/locale"
4301 export PATH="/$HOME/.config/guix/current/bin${PATH:+:}$PATH"
4302 export SSL_CERT_DIR="$HOME/.guix-profile/etc/ssl/certs"
4303 export SSL_CERT_FILE="$HOME/.guix-profile/etc/ssl/certs/ca-certificates.crt"
4304 export GIT_SSL_CAINFO="$SSL_CERT_FILE"
4305 #+end_src
4306
4307 *** zshenv
4308 :PROPERTIES:
4309 :header-args+: :tangle ~/.zshenv
4310 :END:
4311
4312 #+begin_src sh
4313 # Ensure that a non-login, non-interactive shell has a defined environment.
4314 if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
4315   source "${ZDOTDIR:-$HOME}/.zprofile"
4316 fi
4317 #+end_src
4318
4319 *** zshrc
4320 :PROPERTIES:
4321 :header-args+: :tangle ~/.zshrc
4322 :END:
4323
4324 #+begin_src sh
4325 # Bash-like navigation
4326 #export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
4327 #export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
4328 export WORDCHARS='*?[]~=&;!#$%^(){}<>'
4329 #ZLE_SPACE_SUFFIX_CHARS=$'|&'
4330
4331 #disable -r time       # disable shell reserved word
4332 #alias time='time -p'  # -p for POSIX output
4333
4334 # rehash if last command was pacaur or pacman
4335 # (so that zsh picks up changes in $PATH immediately)
4336 TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
4337
4338 #
4339 # User configuration sourced by interactive shells
4340 #
4341
4342 # Define zim location
4343 export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
4344
4345 # Start zim
4346 [[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
4347
4348 ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
4349 #ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
4350
4351 setopt globdots
4352
4353 source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
4354 # source ~/.zsh/zsh-autopair/autopair.zsh
4355
4356
4357 ### fzf ###
4358
4359 source /usr/share/fzf/key-bindings.zsh
4360 source /usr/share/fzf/completion.zsh
4361
4362 # Accept history selection instead of putting it on
4363 # the command line
4364 fzf-history-widget-accept() {
4365   fzf-history-widget
4366   zle accept-line
4367 }
4368 #zle     -N   fzf-history-widget-accept
4369 #bindkey '^R' fzf-history-widget-accept
4370
4371 # alt+c preview
4372 export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
4373
4374 ### fzf ###
4375
4376
4377 # aliases
4378 alias mpv="mpv --ytdl-format mp4"
4379 alias mv="mv -iv"
4380 alias cp="cp -iv"
4381 alias scl=systemctl
4382 alias jcl=journalctl
4383 alias m="mbsync uwaterloo; mbsync amin"
4384 alias best="youtube-dl -f best"
4385 alias sd="ssh deb"
4386 alias sf="ssh fp"
4387 alias sn="ssh nix"
4388
4389 aur() {
4390    cd ~/usr/build
4391    git clone https://aur.archlinux.org/${1}.git
4392    cd ${1}
4393 }
4394
4395 # i-beam cursor
4396 echo -e "\033[5 q"
4397 #echo -e "\033[6 q"
4398
4399 #+end_src
4400
4401 * Scripts
4402
4403 This section contains various useful scripts and the ones used by the
4404 programs above. For instance, =toggle-tablet= for switching to and
4405 from tablet mode on my X220T, =toggle-presentation-mode= for toggling
4406 Xfce's presentation mode which keeps the screen awake, and
4407 =rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
4408 exact brightness value.
4409
4410 ** battery-percentage-time
4411 :PROPERTIES:
4412 :header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/sh"
4413 :END:
4414
4415 #+begin_src sh :tangle no
4416 dbus_send() {
4417         label=$1
4418         dbus-send --print-reply=literal --system \
4419                 --dest=org.freedesktop.UPower \
4420                 /org/freedesktop/UPower/devices/battery_BAT0 \
4421                 org.freedesktop.DBus.Properties.Get \
4422                 string:org.freedesktop.UPower.Device \
4423                 string:"${label}" | awk '{print $3}'
4424 }
4425
4426 perc=$(dbus_send 'Percentage')
4427 state=$(dbus_send 'State')
4428
4429 if [ "$state" -eq 2 ]; then  # Discharging
4430         secs=$(dbus_send 'TimeToEmpty')
4431 elif [ "$state" -eq 1 ]; then  # Charging
4432         secs=$(dbus_send 'TimeToFull')
4433 fi
4434
4435 printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60))
4436 #+end_src
4437
4438 ** my-i3status.py
4439 :PROPERTIES:
4440 :header-args+: :tangle ~/.local/bin/my-i3status.py :shebang "#!/usr/bin/env python2"
4441 :END:
4442
4443 #+begin_src python :comments none
4444 # -*- coding: utf-8 -*-
4445
4446 # This script is a simple wrapper which prefixes each i3status line with custom
4447 # information. It is based on:
4448 # https://github.com/i3/i3status/blob/master/contrib/wrapper.py
4449 #
4450 # In ~/.i3status.conf, add the following line:
4451 #     output_format = "i3bar"
4452 # in the 'general' section.
4453 # Then, in ~/.config/i3/config or ~/.config/sway/config add:
4454 #     status_command i3status | my-i3status.py
4455 # in the 'bar' section.  Make sure my-i3status.py is in $PATH.
4456 #
4457 # © 2012 Valentin Haenel <valentin.haenel@gmx.de>
4458 # © 2018 Amin Bandali <bandali@gnu.org>
4459 #
4460 # This program is free software. It comes without any warranty, to the extent
4461 # permitted by applicable law. You can redistribute it and/or modify it under
4462 # the terms of the Do What The Fuck You Want To Public License (WTFPL), Version
4463 # 2, as published by Sam Hocevar. See http://sam.zoy.org/wtfpl/COPYING for more
4464 # details.
4465
4466 import sys
4467 import json
4468 import os
4469
4470 def get_nosleep():
4471     """ Return true if ~/.nosleep exists. """
4472     return os.path.isfile(os.path.expanduser("~/.nosleep"))
4473
4474 def print_line(message):
4475     """ Non-buffered printing to stdout. """
4476     sys.stdout.write(message + '\n')
4477     sys.stdout.flush()
4478
4479 def read_line():
4480     """ Interrupted respecting reader for stdin. """
4481     # try reading a line, removing any extra whitespace
4482     try:
4483         line = sys.stdin.readline().strip()
4484         # i3status sends EOF, or an empty line
4485         if not line:
4486             sys.exit(3)
4487         return line
4488     # exit on ctrl-c
4489     except KeyboardInterrupt:
4490         sys.exit()
4491
4492 if __name__ == '__main__':
4493     # Skip the first line which contains the version header.
4494     print_line(read_line())
4495
4496     # The second line contains the start of the infinite array.
4497     print_line(read_line())
4498
4499     while True:
4500         line, prefix = read_line(), ''
4501         # ignore comma at start of lines
4502         if line.startswith(','):
4503             line, prefix = line[1:], ','
4504
4505         if get_nosleep():
4506             j = json.loads(line)
4507             # insert information into the start of the json, but could be anywhere
4508             j.insert(0, {'full_text' : '🖵 ', 'name' : 'nosleep'})
4509             # and echo back new encoded json
4510             print_line(prefix+json.dumps(j))
4511         else:
4512             print_line(prefix+line)
4513 #+end_src
4514
4515 ** rofi-light
4516 :PROPERTIES:
4517 :header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
4518 :END:
4519
4520 #+begin_src bash
4521 cur=$(light -G)
4522 val=$(rofi -dmenu -mesg "light    $cur" -p "light -S " -l 0 -width 12)
4523 [ -n "$val" ] && light -S $val
4524 #+end_src
4525
4526 ** rofi-remmina.py
4527 :PROPERTIES:
4528 :header-args+: :tangle ~/.local/bin/rofi-remmina.py :shebang "#!/usr/bin/env python2"
4529 :END:
4530
4531 #+begin_src python
4532 import ConfigParser
4533 import os
4534 from subprocess import Popen, PIPE
4535
4536 remmina_dir = os.path.expanduser("~/.local/share/remmina")
4537
4538 fdict = dict()
4539
4540 for f in os.listdir(remmina_dir):
4541     fp = os.path.join(remmina_dir, f)
4542     c = ConfigParser.ConfigParser()
4543     c.read(fp)
4544     n = c.get('remmina', 'name')
4545     fdict[n] = fp
4546
4547 lines = max(min(15, len(fdict)), 1);
4548 width = len(max(fdict.keys(), key=len))
4549 rofi = Popen(["rofi", "-i", "-dmenu", \
4550               "-l", str(lines), "-width", str(width), \
4551               "-p", "connection"], stdout=PIPE, stdin=PIPE)
4552 selected = rofi.communicate("\n" \
4553                             .join(fdict.keys()) \
4554                             .encode("utf-8"))[0] \
4555                .decode("utf-8") \
4556                .strip()
4557 rofi.wait()
4558
4559 r = Popen(["remmina", "-c", fdict[selected]])
4560 r.wait()
4561 #+end_src
4562
4563 ** s (run sway)
4564 :PROPERTIES:
4565 :header-args+: :tangle ~/.local/bin/s :shebang "#!/bin/bash"
4566 :END:
4567
4568 #+begin_src bash
4569 export _JAVA_AWT_WM_NONREPARENTING=1
4570 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4571 light -Nr 2
4572 source $HOME/.zprofile
4573 sway
4574 #+end_src
4575
4576 ** sway-ws-util
4577 :PROPERTIES:
4578 :header-args+: :tangle ~/.local/bin/sway-ws-util :shebang "#!/bin/bash"
4579 :END:
4580
4581 #+begin_src bash
4582 curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name')
4583 [[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1))
4584 [[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1))
4585 dest_ws=-1
4586 op=-1
4587
4588 if [ "$1" = "switch" ] || [ "$1" = "move" ]; then
4589   op="$1"
4590   if [ "$2" = "prev" ]; then
4591     dest_ws="$prev_ws"
4592   elif [ "$2" = "next" ]; then
4593     dest_ws="$next_ws"
4594   else
4595     echo "Usage: $0 $1 {prev|next} [follow]"
4596     exit 1
4597   fi
4598 else
4599   echo "Usage: $0 {switch|move} {prev|next} [follow]"
4600   exit 1
4601 fi
4602
4603 if [ "$op" = "switch" ]; then
4604   sway workspace "$dest_ws"
4605 elif [ "$op" = "move" ]; then
4606   sway move container to workspace "$dest_ws"
4607   if [ "$3" = "follow" ]; then
4608     sway workspace "$dest_ws"
4609   fi
4610 fi
4611 #+end_src
4612
4613 ** toggle-layout
4614 :PROPERTIES:
4615 :header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
4616 :END:
4617
4618 #+begin_src bash :tangle no
4619 lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
4620
4621 if [ "$lang" = "us" ]; then
4622     setxkbmap ir
4623 else
4624     setxkbmap us
4625     # xmodmap $HOME/.Xmodmap
4626 fi
4627 #+end_src
4628
4629 ** toggle-presentation-mode
4630 :PROPERTIES:
4631 :header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
4632 :END:
4633
4634 #+begin_src bash :tangle no
4635 xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
4636 #+end_src
4637
4638 ** toggle-tablet
4639 :PROPERTIES:
4640 :header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
4641 :END:
4642
4643 This script toggles between a 'normal' mode and a 'tablet' mode, doing
4644 a few things:
4645
4646 - rotates the screen using =xrandr=, so that rotating the physical
4647   display of my X220t would have the laptop's battery on the right
4648   hand side,
4649 - enables touch screen,
4650 - properly rotates the stylus pen and touch screen pointers, and
4651 - toggles between RGB and Vertical BGR sub-pixel order.
4652
4653 #+begin_src bash :tangle no
4654 case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
4655     0)  # Screen is not rotated, we should rotate it right (90°)
4656            xrandr -o 3
4657            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
4658            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
4659            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
4660            xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
4661            ;;
4662     1)  # Currently top is rotated right, we should set it normal (0°)
4663           xrandr -o 0
4664           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
4665           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
4666           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
4667           xfconf-query -c xsettings -p /Xft/RGBA -s rgb
4668           ;;
4669     *)
4670            echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
4671            exit 1
4672            ;;
4673 esac
4674 #+end_src
4675
4676 ** unlock-def-gk.py
4677 :PROPERTIES:
4678 :header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
4679 :END:
4680
4681 #+begin_src python :tangle no
4682 import gnomekeyring as gk
4683 # list_item_ids_sync('login')[0] == 1L
4684 gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
4685 #+end_src
4686
4687 ** volume-info
4688 :PROPERTIES:
4689 :header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh"
4690 :END:
4691
4692 #+begin_src sh :tangle no
4693 cur_vol=$(pamixer --get-volume)
4694
4695 if [ $(pamixer --get-mute) = true ]; then
4696   printf 'mt \n' "$cur_vol"
4697 else
4698   printf '%02d \n' "$cur_vol"
4699 fi
4700 #+end_src
4701
4702 ** wp
4703
4704 My little wallpaper changer script.
4705
4706 *** wp
4707 :PROPERTIES:
4708 :header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
4709 :END:
4710
4711 #+begin_src bash :tangle no
4712 export DISPLAY=:0
4713
4714 case "$1" in
4715   "day")
4716     feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
4717     ;;
4718   "night")
4719     feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
4720     ;;
4721   *)
4722     echo $"Usage: $0 {day|night}"
4723     exit 1
4724 esac
4725 #+end_src
4726
4727 *** wp-auto
4728 :PROPERTIES:
4729 :header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
4730 :END:
4731
4732 #+begin_src bash :tangle no
4733 SED=$(which sed)
4734 ROFI=$(which rofi)
4735
4736 export DISPLAY=:0
4737 HOUR=$(date +%H)
4738
4739 if [ -z "${SED}" ]
4740 then
4741     echo "Did not find 'sed', script cannot continue."
4742     exit 1
4743 fi
4744 if [ -z "${ROFI}" ]
4745 then
4746     echo "Did not find rofi, there is no point to continue."
4747     exit 1
4748 fi
4749
4750 ###
4751 # Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
4752 # Repeated calls should leave the config clean-ish
4753 ###
4754 function set_theme()
4755 {
4756     CDIR="${HOME}/.config/rofi/"
4757     if [ ! -d "${CDIR}" ]
4758     then
4759         mkdir -p ${CDIR}
4760     fi
4761     if [ -f "${CDIR}/config" ]
4762     then
4763         ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
4764     fi
4765     echo "rofi.theme: ${1}" >> "${CDIR}/config"
4766
4767 }
4768
4769 if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
4770     then
4771         feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
4772         xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
4773         set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
4774     else
4775         feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
4776         xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
4777         set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
4778 fi
4779 #+end_src
4780
4781 *** wp.service
4782 :PROPERTIES:
4783 :header-args+: :tangle ~/.config/systemd/user/wp.service
4784 :END:
4785
4786 #+begin_src conf :tangle no
4787 [Unit]
4788 Description=wallpaper service
4789
4790 [Service]
4791 Type=oneshot
4792 ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
4793 #+end_src
4794
4795 *** wp.timer
4796 :PROPERTIES:
4797 :header-args+: :tangle ~/.config/systemd/user/wp.timer
4798 :END:
4799
4800 #+begin_src conf :tangle no
4801 [Unit]
4802 [Unit]
4803 Description=wallpaper timer
4804
4805 [Timer]
4806 OnCalendar=07,21:00
4807 Unit=wp.service
4808 Persistent=true
4809
4810 [Install]
4811 WantedBy=timers.target
4812 #+end_src
4813
4814 ** zathura-sync.sh
4815 :PROPERTIES:
4816 :header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
4817 :END:
4818
4819 #+begin_src sh
4820 pos="$1"
4821 pdffile="$2"
4822 zathura --synctex-forward "$pos" "$pdffile" || \
4823     (
4824     zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
4825     sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
4826 #+end_src
4827 ** Fun :)
4828
4829 *** eat-em
4830 :PROPERTIES:
4831 :header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
4832 :END:
4833
4834 #+begin_src sh
4835 # Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
4836 # [ESC] character in original post removed here.
4837
4838 # ANSI Color -- use these variables to easily have different color
4839 #    and format output. Make sure to output the reset sequence after
4840 #    colors (f = foreground, b = background), and use the 'off'
4841 #    feature for anything you turn on.
4842
4843 initializeANSI()
4844 {
4845  esc="$(echo -en '\e')"
4846
4847   blackf="${esc}[30m";   redf="${esc}[31m";    greenf="${esc}[32m"
4848   yellowf="${esc}[33m"   bluef="${esc}[34m";   purplef="${esc}[35m"
4849   cyanf="${esc}[36m";    whitef="${esc}[37m"
4850
4851   blackb="${esc}[40m";   redb="${esc}[41m";    greenb="${esc}[42m"
4852   yellowb="${esc}[43m"   blueb="${esc}[44m";   purpleb="${esc}[45m"
4853   cyanb="${esc}[46m";    whiteb="${esc}[47m"
4854
4855   boldon="${esc}[1m";    boldoff="${esc}[22m"
4856   italicson="${esc}[3m"; italicsoff="${esc}[23m"
4857   ulon="${esc}[4m";      uloff="${esc}[24m"
4858   invon="${esc}[7m";     invoff="${esc}[27m"
4859
4860   reset="${esc}[0m"
4861 }
4862
4863 # note in this first use that switching colors doesn't require a reset
4864 # first - the new color overrides the old one.
4865
4866 #clear
4867
4868 initializeANSI
4869
4870 cat << EOF
4871
4872  ${yellowf}  ▄███████▄${reset}   ${redf}  ▄██████▄${reset}    ${greenf}  ▄██████▄${reset}    ${bluef}  ▄██████▄${reset}    ${purplef}  ▄██████▄${reset}    ${cyanf}  ▄██████▄${reset}
4873  ${yellowf}▄█████████▀▀${reset}  ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset}  ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset}  ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset}  ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset}  ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
4874  ${yellowf}███████▀${reset}      ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset}  ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset}  ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset}  ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset}  ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
4875  ${yellowf}███████▄${reset}      ${redf}████████████${reset}  ${greenf}████████████${reset}  ${bluef}████████████${reset}  ${purplef}████████████${reset}  ${cyanf}████████████${reset}
4876  ${yellowf}▀█████████▄▄${reset}  ${redf}██▀██▀▀██▀██${reset}  ${greenf}██▀██▀▀██▀██${reset}  ${bluef}██▀██▀▀██▀██${reset}  ${purplef}██▀██▀▀██▀██${reset}  ${cyanf}██▀██▀▀██▀██${reset}
4877  ${yellowf}  ▀███████▀${reset}   ${redf}▀   ▀  ▀   ▀${reset}  ${greenf}▀   ▀  ▀   ▀${reset}  ${bluef}▀   ▀  ▀   ▀${reset}  ${purplef}▀   ▀  ▀   ▀${reset}  ${cyanf}▀   ▀  ▀   ▀${reset}
4878
4879  ${boldon}${yellowf}  ▄███████▄   ${redf}  ▄██████▄    ${greenf}  ▄██████▄    ${bluef}  ▄██████▄    ${purplef}  ▄██████▄    ${cyanf}  ▄██████▄${reset}
4880  ${boldon}${yellowf}▄█████████▀▀  ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄  ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄  ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄  ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄  ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
4881  ${boldon}${yellowf}███████▀      ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███  ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███  ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███  ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███  ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
4882  ${boldon}${yellowf}███████▄      ${redf}████████████  ${greenf}████████████  ${bluef}████████████  ${purplef}████████████  ${cyanf}████████████${reset}
4883  ${boldon}${yellowf}▀█████████▄▄  ${redf}██▀██▀▀██▀██  ${greenf}██▀██▀▀██▀██  ${bluef}██▀██▀▀██▀██  ${purplef}██▀██▀▀██▀██  ${cyanf}██▀██▀▀██▀██${reset}
4884  ${boldon}${yellowf}  ▀███████▀   ${redf}▀   ▀  ▀   ▀  ${greenf}▀   ▀  ▀   ▀  ${bluef}▀   ▀  ▀   ▀  ${purplef}▀   ▀  ▀   ▀  ${cyanf}▀   ▀  ▀   ▀${reset}
4885
4886 EOF
4887 #+end_src
4888
4889 *** invade-em
4890 :PROPERTIES:
4891 :header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
4892 :END:
4893
4894 #+begin_src bash
4895 #
4896 # ANSI color scheme script featuring Space Invaders
4897 #
4898 # Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
4899 # Modified by lolilolicon
4900 #
4901
4902 f=3 b=4
4903 for j in f b; do
4904   for i in {0..7}; do
4905     printf -v $j$i %b "\e[${!j}${i}m"
4906   done
4907 done
4908 bld=$'\e[1m'
4909 rst=$'\e[0m'
4910
4911 cat << EOF
4912
4913  $f1  ▀▄   ▄▀     $f2 ▄▄▄████▄▄▄    $f3  ▄██▄     $f4  ▀▄   ▄▀     $f5 ▄▄▄████▄▄▄    $f6  ▄██▄  $rst
4914  $f1 ▄█▀███▀█▄    $f2███▀▀██▀▀███   $f3▄█▀██▀█▄   $f4 ▄█▀███▀█▄    $f5███▀▀██▀▀███   $f6▄█▀██▀█▄$rst
4915  $f1█▀███████▀█   $f2▀▀███▀▀███▀▀   $f3▀█▀██▀█▀   $f4█▀███████▀█   $f5▀▀███▀▀███▀▀   $f6▀█▀██▀█▀$rst
4916  $f1▀ ▀▄▄ ▄▄▀ ▀   $f2 ▀█▄ ▀▀ ▄█▀    $f3▀▄    ▄▀   $f4▀ ▀▄▄ ▄▄▀ ▀   $f5 ▀█▄ ▀▀ ▄█▀    $f6▀▄    ▄▀$rst
4917
4918  $bld$f1▄ ▀▄   ▄▀ ▄   $f2 ▄▄▄████▄▄▄    $f3  ▄██▄     $f4▄ ▀▄   ▄▀ ▄   $f5 ▄▄▄████▄▄▄    $f6  ▄██▄  $rst
4919  $bld$f1█▄█▀███▀█▄█   $f2███▀▀██▀▀███   $f3▄█▀██▀█▄   $f4█▄█▀███▀█▄█   $f5███▀▀██▀▀███   $f6▄█▀██▀█▄$rst
4920  $bld$f1▀█████████▀   $f2▀▀▀██▀▀██▀▀▀   $f3▀▀█▀▀█▀▀   $f4▀█████████▀   $f5▀▀▀██▀▀██▀▀▀   $f6▀▀█▀▀█▀▀$rst
4921  $bld$f1 ▄▀     ▀▄    $f2▄▄▀▀ ▀▀ ▀▀▄▄   $f3▄▀▄▀▀▄▀▄   $f4 ▄▀     ▀▄    $f5▄▄▀▀ ▀▀ ▀▀▄▄   $f6▄▀▄▀▀▄▀▄$rst
4922
4923
4924                                      $f7▌$rst
4925
4926                                    $f7▌$rst
4927
4928                               $f7    ▄█▄    $rst
4929                               $f7▄█████████▄$rst
4930                               $f7▀▀▀▀▀▀▀▀▀▀▀$rst
4931
4932 EOF
4933 #+end_src