[emacs] remove ox-hugo

[~bandali/configs] / rc.org

diff --git a/rc.org b/rc.org
index 1dfdf08..15ec884 100644 (file)
--- a/rc.org
+++ b/rc.org
@@ -775,8 +775,8 @@ Expunge Both
 
 ######
 IMAPAccount amin
 
 ######
 IMAPAccount amin

-Host mail.aminb.org
-User amin@aminb.org
+Host mail.bndl.org
+User amin@bndl.org

 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
 SSLType IMAPS
 
 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
 SSLType IMAPS
 


@@ -786,7 +786,7 @@ Account amin
 IMAPAccount amin-dovecot
 Host 127.0.0.1
 Port 143
 IMAPAccount amin-dovecot
 Host 127.0.0.1
 Port 143

-User amin@aminb.org
+User amin@bndl.org

 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin-dovecot.gpg"
 SSLType None
 
 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin-dovecot.gpg"
 SSLType None
 


@@ -822,6 +822,31 @@ Channel uwaterloo
 Master :uwaterloo-remote:
 Slave :uwaterloo-local:
 Patterns *
 Master :uwaterloo-remote:
 Slave :uwaterloo-local:
 Patterns *

+
+######
+IMAPAccount csclub
+Host mail.csclub.uwaterloo.ca
+User abandali
+PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/csclub.gpg"
+SSLType IMAPS
+
+IMAPStore csclub-remote
+Account csclub
+
+IMAPAccount csclub-dovecot
+Host 127.0.0.1
+Port 143
+User abandali@csclub.uw
+PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/csclub-dovecot.gpg"
+SSLType None
+
+IMAPStore csclub-local
+Account csclub-dovecot
+
+Channel csclub
+Master :csclub-remote:
+Slave :csclub-local:
+Patterns *

 #+end_src
 
 *** mbsync.service
 #+end_src
 
 *** mbsync.service


@@ -1394,18 +1419,18 @@ auth on
 #tls_trust_file /etc/ssl/certs/ca-certificates.crt
 logfile ~/.msmtp.log
 
 #tls_trust_file /etc/ssl/certs/ca-certificates.crt
 logfile ~/.msmtp.log
 

-# aminb
-account aminb
-host mail.aminb.org
-# use `msmtp -a aminb --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
-tls_fingerprint DE:5F:73:0C:F7:9A:7B:1D:55:AA:49:28:E7:28:49:24:A4:08:55:00:7A:7E:D8:7F:30:06:26:24:11:29:61:07
+# amin
+account amin
+host mail.bndl.org
+# use `msmtp -a amin --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
+tls_fingerprint B8:17:DF:D7:26:56:4F:CD:F0:51:D5:E5:4C:44:B6:F1:C9:47:E7:A2:C7:36:C9:C1:F2:10:85:18:43:72:9D:ED

 tls_starttls on
 tls_starttls on

-from amin@aminb.org
-user amin@aminb.org
+from amin@bndl.org
+user amin@bndl.org

 passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
 
 passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
 

-account bandali-me : aminb
-from amin@bandali.me
+account aminb : amin
+from amin@aminb.org

 
 # gnu
 account gnu
 
 # gnu
 account gnu


@@ -1434,8 +1459,17 @@ user abandali
 passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
 tls_trust_file /etc/ssl/certs/ca-certificates.crt
 
 passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
 tls_trust_file /etc/ssl/certs/ca-certificates.crt
 

+# csclub
+account csclub
+host mail.csclub.uwaterloo.ca
+tls_starttls on
+from abandali@csclub.uwaterloo.ca
+user abandali
+passwordeval gpg2 --no-tty -q -d ~/.passwd/csclub.gpg
+tls_trust_file /etc/ssl/certs/ca-certificates.crt
+

 # Set a default account
 # Set a default account

-account default : aminb
+account default : amin

 #+end_src
 
 ** ncmpcpp
 #+end_src
 
 ** ncmpcpp


@@ -2324,8 +2358,8 @@ LocalFileSigLevel = Optional
 #[nonprism]
 #Include = /etc/pacman.d/mirrorlist
 
 #[nonprism]
 #Include = /etc/pacman.d/mirrorlist
 

-#[libre-testing]
-#Include = /etc/pacman.d/mirrorlist
+[libre-testing]
+Include = /etc/pacman.d/mirrorlist

 
 [libre]
 Include = /etc/pacman.d/mirrorlist
 
 [libre]
 Include = /etc/pacman.d/mirrorlist


@@ -2461,7 +2495,7 @@ Server = https://repo.parabola.nu/$repo/os/$arch
 ** pigeonhole
 *** amin.sieve
 :PROPERTIES:
 ** pigeonhole
 *** amin.sieve
 :PROPERTIES:

-:header-args+: :tangle ~/mail/aminb.org/amin/sieve/amin.sieve :comments none
+:header-args+: :tangle ~/mail/bndl.org/amin/sieve/amin.sieve :comments none

 :END:
 
 #+begin_src conf
 :END:
 
 #+begin_src conf


@@ -2480,7 +2514,7 @@ include :personal "lists";
 
 *** lists.sieve
 :PROPERTIES:
 
 *** lists.sieve
 :PROPERTIES:

-:header-args+: :tangle ~/mail/aminb.org/amin/sieve/lists.sieve :comments none
+:header-args+: :tangle ~/mail/bndl.org/amin/sieve/lists.sieve :comments none

 :END:
 
 #+begin_src conf
 :END:
 
 #+begin_src conf


@@ -2706,7 +2740,7 @@ clip=primary
 # Options for generating new password entries
 # default_user is also used for password files that have no user field.
 default_user=aminb
 # Options for generating new password entries
 # default_user is also used for password files that have no user field.
 default_user=aminb

-default_user2=aminban
+default_user2=bandali

 password_length=30
 
 # Custom Keybindings
 password_length=30
 
 # Custom Keybindings


@@ -3101,33 +3135,43 @@ TTYVTDisallocate=no
 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "langa")) "/sudo::/etc/default/tlp")
 # ------------------------------------------------------------------------------
 # tlp - Parameters for power saving
 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "langa")) "/sudo::/etc/default/tlp")
 # ------------------------------------------------------------------------------
 # tlp - Parameters for power saving

-# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
+# See full explanation: https://linrunner.de/en/tlp/docs/tlp-configuration.html

 
 

-# Hint: some features are disabled by default, remove the leading # to enable
-# them.
+# Notes:
+# - Some parameters are disabled, remove the leading '#' to enable # them;
+#   shown values are suggestions not defaults
+# - Default *: intrinsic default that is effective when the parameter is missing
+#   or disabled by a leading '#'; use PARAM="" to disable intrinsic defaults for
+#   parameters with text string values
+# - Default <none>: do nothing or use kernel/hardware defaults

 
 # Set to 0 to disable, 1 to enable TLP.
 
 # Set to 0 to disable, 1 to enable TLP.

+# Default: 0

 TLP_ENABLE=1
 
 # Operation mode when no power supply can be detected: AC, BAT.
 # Concerns some desktop and embedded hardware only.
 TLP_ENABLE=1
 
 # Operation mode when no power supply can be detected: AC, BAT.
 # Concerns some desktop and embedded hardware only.

+# Default: <none>

 TLP_DEFAULT_MODE=AC
 
 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
 TLP_DEFAULT_MODE=AC
 
 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.

+# Default: 0

 TLP_PERSISTENT_DEFAULT=0
 
 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
 # Non-zero value enables, zero disables laptop mode.
 TLP_PERSISTENT_DEFAULT=0
 
 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
 # Non-zero value enables, zero disables laptop mode.

+# Default: 0 (AC), 2 (BAT)

 DISK_IDLE_SECS_ON_AC=0
 DISK_IDLE_SECS_ON_BAT=2
 
 # Dirty page values (timeouts in secs).
 DISK_IDLE_SECS_ON_AC=0
 DISK_IDLE_SECS_ON_BAT=2
 
 # Dirty page values (timeouts in secs).

+# Default: 15 (AC + BAT)

 MAX_LOST_WORK_SECS_ON_AC=15
 MAX_LOST_WORK_SECS_ON_BAT=60
 
 MAX_LOST_WORK_SECS_ON_AC=15
 MAX_LOST_WORK_SECS_ON_BAT=60
 

-# Hint: CPU parameters below are disabled by default, remove the leading #
-# to enable them, otherwise kernel default values are used.
+# Note: CPU parameters below are disabled by default, remove the leading #
+# to enable them, otherwise kernel defaults will be used.

 
 # Select a CPU frequency scaling governor.
 # Intel Core i processor with intel_pstate driver:
 
 # Select a CPU frequency scaling governor.
 # Intel Core i processor with intel_pstate driver:


@@ -3135,19 +3179,21 @@ MAX_LOST_WORK_SECS_ON_BAT=60
 # Older hardware with acpi-cpufreq driver:
 #   ondemand(*), powersave, performance, conservative, schedutil.
 # (*) is recommended.
 # Older hardware with acpi-cpufreq driver:
 #   ondemand(*), powersave, performance, conservative, schedutil.
 # (*) is recommended.

-# Hint: use tlp-stat -p to show the active driver and available governors.
+# Use tlp-stat -p to show the active driver and available governors.

 # Important:
 #   powersave for intel_pstate and ondemand for acpi-cpufreq are power
 #   efficient for *almost all* workloads and therefore kernel and most
 #   distributions have chosen them as defaults. If you still want to change,
 #   you should know what you're doing! You *must* disable your distribution's
 #   governor settings or conflicts will occur.
 # Important:
 #   powersave for intel_pstate and ondemand for acpi-cpufreq are power
 #   efficient for *almost all* workloads and therefore kernel and most
 #   distributions have chosen them as defaults. If you still want to change,
 #   you should know what you're doing! You *must* disable your distribution's
 #   governor settings or conflicts will occur.

+# Default: <none>

 #CPU_SCALING_GOVERNOR_ON_AC=powersave
 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
 
 # Set the min/max frequency available for the scaling governor.
 #CPU_SCALING_GOVERNOR_ON_AC=powersave
 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
 
 # Set the min/max frequency available for the scaling governor.

-# Possible values strongly depend on your CPU. For available frequencies see
+# Possible values depend on your CPU. For available frequencies see

 # the output of tlp-stat -p.
 # the output of tlp-stat -p.

+# Default: <none>

 #CPU_SCALING_MIN_FREQ_ON_AC=0
 #CPU_SCALING_MAX_FREQ_ON_AC=0
 #CPU_SCALING_MIN_FREQ_ON_BAT=0
 #CPU_SCALING_MIN_FREQ_ON_AC=0
 #CPU_SCALING_MAX_FREQ_ON_AC=0
 #CPU_SCALING_MIN_FREQ_ON_BAT=0


@@ -3157,6 +3203,7 @@ MAX_LOST_WORK_SECS_ON_BAT=60
 #   performance, balance_performance, default, balance_power, power
 # Values are given in order of increasing power saving.
 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
 #   performance, balance_performance, default, balance_power, power
 # Values are given in order of increasing power saving.
 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.

+# Default: <none>

 CPU_HWP_ON_AC=balance_performance
 CPU_HWP_ON_BAT=balance_power
 
 CPU_HWP_ON_AC=balance_performance
 CPU_HWP_ON_BAT=balance_power
 


@@ -3164,6 +3211,7 @@ CPU_HWP_ON_BAT=balance_power
 # Limit the max/min P-state to control the power dissipation of the CPU.
 # Values are stated as a percentage of the available performance.
 # Requires an Intel Core i processor with intel_pstate driver.
 # Limit the max/min P-state to control the power dissipation of the CPU.
 # Values are stated as a percentage of the available performance.
 # Requires an Intel Core i processor with intel_pstate driver.

+# Default: <none>

 #CPU_MIN_PERF_ON_AC=0
 #CPU_MAX_PERF_ON_AC=100
 #CPU_MIN_PERF_ON_BAT=0
 #CPU_MIN_PERF_ON_AC=0
 #CPU_MAX_PERF_ON_AC=100
 #CPU_MIN_PERF_ON_BAT=0


@@ -3174,39 +3222,47 @@ CPU_HWP_ON_BAT=balance_power
 # Important:
 # - This may conflict with your distribution's governor settings
 # - A value of 1 does *not* activate boosting, it just allows it
 # Important:
 # - This may conflict with your distribution's governor settings
 # - A value of 1 does *not* activate boosting, it just allows it

+# Default: <none>

 #CPU_BOOST_ON_AC=1
 #CPU_BOOST_ON_BAT=0
 
 # Minimize number of used CPU cores/hyper-threads under light load conditions:
 #   0=disable, 1=enable.
 #CPU_BOOST_ON_AC=1
 #CPU_BOOST_ON_BAT=0
 
 # Minimize number of used CPU cores/hyper-threads under light load conditions:
 #   0=disable, 1=enable.

+# Default: <none>

 SCHED_POWERSAVE_ON_AC=0
 SCHED_POWERSAVE_ON_BAT=1
 
 # Kernel NMI Watchdog:
 #   0=disable (default, saves power), 1=enable (for kernel debugging only).
 SCHED_POWERSAVE_ON_AC=0
 SCHED_POWERSAVE_ON_BAT=1
 
 # Kernel NMI Watchdog:
 #   0=disable (default, saves power), 1=enable (for kernel debugging only).

+# Default: <none>

 NMI_WATCHDOG=0
 
 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
 # Frequency voltage pairs are written to:
 #   /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
 # CAUTION: only use this, if you thoroughly understand what you are doing!
 NMI_WATCHDOG=0
 
 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
 # Frequency voltage pairs are written to:
 #   /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
 # CAUTION: only use this, if you thoroughly understand what you are doing!

+# Default: <none>.

 #PHC_CONTROLS="F:V F:V F:V F:V"
 
 # Set CPU performance versus energy savings policy:
 #   performance, balance-performance, default, balance-power, power.
 # Values are given in order of increasing power saving.
 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
 #PHC_CONTROLS="F:V F:V F:V F:V"
 
 # Set CPU performance versus energy savings policy:
 #   performance, balance-performance, default, balance-power, power.
 # Values are given in order of increasing power saving.
 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.

+# Default: <none>

 ENERGY_PERF_POLICY_ON_AC=performance
 ENERGY_PERF_POLICY_ON_BAT=balance-power
 
 ENERGY_PERF_POLICY_ON_AC=performance
 ENERGY_PERF_POLICY_ON_BAT=balance-power
 

-# Disk devices; separate multiple devices with spaces (default: sda).
+# Disk devices; separate multiple devices with spaces.

 # Devices can be specified by disk ID also (lookup with: tlp diskid).
 # Devices can be specified by disk ID also (lookup with: tlp diskid).

+# Note: DISK parameters below are effective only when this option is configured.
+# Default: "nvme0n1 sda"

 DISK_DEVICES="sda sdb"
 
 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
 # Separate values for multiple disks with spaces. Use the special value 'keep'
 # to keep the hardware default for the particular disk.
 DISK_DEVICES="sda sdb"
 
 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
 # Separate values for multiple disks with spaces. Use the special value 'keep'
 # to keep the hardware default for the particular disk.

+# Default: <none>

 DISK_APM_LEVEL_ON_AC="254 254"
 DISK_APM_LEVEL_ON_BAT="128 128"
 
 DISK_APM_LEVEL_ON_AC="254 254"
 DISK_APM_LEVEL_ON_BAT="128 128"
 


@@ -3217,179 +3273,249 @@ DISK_APM_LEVEL_ON_BAT="128 128"
 # See 'man hdparm' for details.
 # Separate values for multiple disks with spaces. Use the special value 'keep'
 # to keep the hardware default for the particular disk.
 # See 'man hdparm' for details.
 # Separate values for multiple disks with spaces. Use the special value 'keep'
 # to keep the hardware default for the particular disk.

+# Default: <none>

 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
 
 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
 

-# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
+# Select I/O scheduler for the disk devices.
+# Multi queue (blk-mq) schedulers:
+#   mq-deadline(*), none, kyber, bfq
+# Single queue schedulers:
+#   deadline(*), cfq, bfq, noop
+# (*) recommended.

 # Separate values for multiple disks with spaces. Use the special value 'keep'
 # to keep the kernel default scheduler for the particular disk.
 # Separate values for multiple disks with spaces. Use the special value 'keep'
 # to keep the kernel default scheduler for the particular disk.

-#DISK_IOSCHED="cfq cfq"
+# Notes:
+# - Multi queue (blk-mq) may need kernel boot option 'scsi_mod.use_blk_mq=1'
+#   and 'modprobe mq-deadline-iosched|kyber|bfq' on kernels < 5.0
+# - Single queue schedulers are legacy now and were removed together with
+#   the old block layer in kernel 5.0
+# Default: keep
+#DISK_IOSCHED="mq-deadline mq-deadline"

 
 # AHCI link power management (ALPM) for disk devices:
 #   min_power, med_power_with_dipm(*), medium_power, max_performance.
 # (*) Kernel >= 4.15 required, then recommended.
 # Multiple values separated with spaces are tried sequentially until success.
 
 # AHCI link power management (ALPM) for disk devices:
 #   min_power, med_power_with_dipm(*), medium_power, max_performance.
 # (*) Kernel >= 4.15 required, then recommended.
 # Multiple values separated with spaces are tried sequentially until success.

+# Default: <none>

 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
 
 # Exclude host devices from AHCI link power management.
 # Separate multiple hosts with spaces.
 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
 
 # Exclude host devices from AHCI link power management.
 # Separate multiple hosts with spaces.

+# Default: <none>

 #SATA_LINKPWR_BLACKLIST="host1"
 
 # Runtime Power Management for AHCI host and disks devices:
 #   on=disable, auto=enable.
 #SATA_LINKPWR_BLACKLIST="host1"
 
 # Runtime Power Management for AHCI host and disks devices:
 #   on=disable, auto=enable.

-# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
+# EXPERIMENTAL ** WARNING: auto may cause system lockups/data loss.
+# Default: <none>

 #AHCI_RUNTIME_PM_ON_AC=on
 #AHCI_RUNTIME_PM_ON_BAT=on
 
 # Seconds of inactivity before disk is suspended.
 #AHCI_RUNTIME_PM_ON_AC=on
 #AHCI_RUNTIME_PM_ON_BAT=on
 
 # Seconds of inactivity before disk is suspended.

+# Note: effective only when AHCI_RUNTIME_PM_ON_AC/BAT is activated.
+# Default: 15

 AHCI_RUNTIME_PM_TIMEOUT=15
 
 # PCI Express Active State Power Management (PCIe ASPM):
 AHCI_RUNTIME_PM_TIMEOUT=15
 
 # PCI Express Active State Power Management (PCIe ASPM):

-#   default, performance, powersave.
-PCIE_ASPM_ON_AC=performance
-PCIE_ASPM_ON_BAT=powersave
+#   default(*), performance, powersave.
+# (*) keeps BIOS ASPM defaults (recommended)
+# Default: <none>
+#PCIE_ASPM_ON_AC=default
+#PCIE_ASPM_ON_BAT=default
+
+# Set the min/max/turbo frequency for the Intel GPU.
+# Possible values depend on your hardware. For available frequencies see
+# the output of tlp-stat -g.
+# Default: <none>
+#INTEL_GPU_MIN_FREQ_ON_AC=0
+#INTEL_GPU_MIN_FREQ_ON_BAT=0
+#INTEL_GPU_MAX_FREQ_ON_AC=0
+#INTEL_GPU_MAX_FREQ_ON_BAT=0
+#INTEL_GPU_BOOST_FREQ_ON_AC=0
+#INTEL_GPU_BOOST_FREQ_ON_BAT=0

 
 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
 
 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;

-# auto = mid on BAT, high on AC; default = use hardware defaults.
-RADEON_POWER_PROFILE_ON_AC=high
-RADEON_POWER_PROFILE_ON_BAT=low
+# auto = mid on BAT, high on AC.
+# Default: default
+RADEON_POWER_PROFILE_ON_AC=default
+RADEON_POWER_PROFILE_ON_BAT=default

 
 # Radeon dynamic power management method (DPM): battery, performance.
 
 # Radeon dynamic power management method (DPM): battery, performance.

+# Default: <none>

 RADEON_DPM_STATE_ON_AC=performance
 RADEON_DPM_STATE_ON_BAT=battery
 
 # Radeon DPM performance level: auto, low, high; auto is recommended.
 RADEON_DPM_STATE_ON_AC=performance
 RADEON_DPM_STATE_ON_BAT=battery
 
 # Radeon DPM performance level: auto, low, high; auto is recommended.

+# Note: effective only when RADEON_DPM_STATE_ON_AC/BAT is activated.
+# Default: auto

 RADEON_DPM_PERF_LEVEL_ON_AC=auto
 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
 
 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
 RADEON_DPM_PERF_LEVEL_ON_AC=auto
 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
 
 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.

+# Default: <none>

 WIFI_PWR_ON_AC=off
 WIFI_PWR_ON_BAT=on
 
 # Disable wake on LAN: Y/N.
 WIFI_PWR_ON_AC=off
 WIFI_PWR_ON_BAT=on
 
 # Disable wake on LAN: Y/N.

+# Default: N

 WOL_DISABLE=Y
 
 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
 # A value of 0 disables, >=1 enables power saving (recommended: 1).
 WOL_DISABLE=Y
 
 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
 # A value of 0 disables, >=1 enables power saving (recommended: 1).

+# Default: <none>

 SOUND_POWER_SAVE_ON_AC=0
 SOUND_POWER_SAVE_ON_BAT=0
 
 # Disable controller too (HDA only): Y/N.
 SOUND_POWER_SAVE_ON_AC=0
 SOUND_POWER_SAVE_ON_BAT=0
 
 # Disable controller too (HDA only): Y/N.

+# Note: effective only when SOUND_POWER_SAVE_ON_AC/BAT is activated.
+# Default: Y

 SOUND_POWER_SAVE_CONTROLLER=N
 
 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
 # Drive can be powered on again by releasing (and reinserting) the eject lever
 # or by pressing the disc eject button on newer models.
 # Note: an UltraBay/MediaBay hard disk is never powered off.
 SOUND_POWER_SAVE_CONTROLLER=N
 
 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
 # Drive can be powered on again by releasing (and reinserting) the eject lever
 # or by pressing the disc eject button on newer models.
 # Note: an UltraBay/MediaBay hard disk is never powered off.

+# Default: 0

 BAY_POWEROFF_ON_AC=0
 BAY_POWEROFF_ON_BAT=0
 BAY_POWEROFF_ON_AC=0
 BAY_POWEROFF_ON_BAT=0

-# Optical drive device to power off (default sr0).
+# Optical drive device to power off
+# Default: sr0

 BAY_DEVICE="sr0"
 
 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
 BAY_DEVICE="sr0"
 
 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.

+# Default: <none>

 RUNTIME_PM_ON_AC=on
 RUNTIME_PM_ON_BAT=auto
 
 # Exclude PCI(e) device adresses the following list from Runtime PM
 # (separate with spaces). Use lspci to get the adresses (1st column).
 RUNTIME_PM_ON_AC=on
 RUNTIME_PM_ON_BAT=auto
 
 # Exclude PCI(e) device adresses the following list from Runtime PM
 # (separate with spaces). Use lspci to get the adresses (1st column).

+# Default: <none>

 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
 
 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
 # prevents accidential power-on of dGPU in hybrid graphics setups.
 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
 
 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
 # prevents accidential power-on of dGPU in hybrid graphics setups.

-# Use "" to disable the feature completely.

 # Separate multiple drivers with spaces.
 # Separate multiple drivers with spaces.

-#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
+# Default: "amdgpu mei_me nouveau nvidia pcieport radeon", use "" to disable
+# completely.
+#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu mei_me nouveau nvidia pcieport radeon"

 
 # Set to 0 to disable, 1 to enable USB autosuspend feature.
 
 # Set to 0 to disable, 1 to enable USB autosuspend feature.

+# Default: 0

 USB_AUTOSUSPEND=1
 
 # Exclude listed devices from USB autosuspend (separate with spaces).
 # Use lsusb to get the ids.
 # Note: input devices (usbhid) are excluded automatically
 USB_AUTOSUSPEND=1
 
 # Exclude listed devices from USB autosuspend (separate with spaces).
 # Use lsusb to get the ids.
 # Note: input devices (usbhid) are excluded automatically

+# Default: <none>

 #USB_BLACKLIST="1111:2222 3333:4444"
 
 # Bluetooth devices are excluded from USB autosuspend:
 #   0=do not exclude, 1=exclude.
 #USB_BLACKLIST="1111:2222 3333:4444"
 
 # Bluetooth devices are excluded from USB autosuspend:
 #   0=do not exclude, 1=exclude.

+# Default: 0

 USB_BLACKLIST_BTUSB=0
 
 # Phone devices are excluded from USB autosuspend:
 #   0=do not exclude, 1=exclude (enable charging).
 USB_BLACKLIST_BTUSB=0
 
 # Phone devices are excluded from USB autosuspend:
 #   0=do not exclude, 1=exclude (enable charging).

+# Default: 0

 USB_BLACKLIST_PHONE=0
 
 # Printers are excluded from USB autosuspend:
 #   0=do not exclude, 1=exclude.
 USB_BLACKLIST_PHONE=0
 
 # Printers are excluded from USB autosuspend:
 #   0=do not exclude, 1=exclude.

+# Default: 1

 USB_BLACKLIST_PRINTER=1
 
 # WWAN devices are excluded from USB autosuspend:
 #   0=do not exclude, 1=exclude.
 USB_BLACKLIST_PRINTER=1
 
 # WWAN devices are excluded from USB autosuspend:
 #   0=do not exclude, 1=exclude.

-USB_BLACKLIST_WWAN=1
+# Default: 0
+USB_BLACKLIST_WWAN=0

 
 # Include listed devices into USB autosuspend even if already excluded
 
 # Include listed devices into USB autosuspend even if already excluded

-# by the blacklists above (separate with spaces).
-# Use lsusb to get the ids.
+# by the blacklists above (separate with spaces). Use lsusb to get the ids.
+# Default: <none>

 #USB_WHITELIST="1111:2222 3333:4444"
 
 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
 # (workaround for USB devices that cause shutdown problems).
 #USB_WHITELIST="1111:2222 3333:4444"
 
 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
 # (workaround for USB devices that cause shutdown problems).

+# Default: 0

 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
 
 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
 # on system startup: 0=disable, 1=enable.
 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
 
 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
 # on system startup: 0=disable, 1=enable.

-# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
-#   are ignored when this is enabled!
+# Note: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
+#   are ignored when this is enabled.
+# Default: 0

 #RESTORE_DEVICE_STATE_ON_STARTUP=0
 RESTORE_DEVICE_STATE_ON_STARTUP=1
 
 # Radio devices to disable on startup: bluetooth, wifi, wwan.
 # Separate multiple devices with spaces.
 #RESTORE_DEVICE_STATE_ON_STARTUP=0
 RESTORE_DEVICE_STATE_ON_STARTUP=1
 
 # Radio devices to disable on startup: bluetooth, wifi, wwan.
 # Separate multiple devices with spaces.

+# Default: <none>

 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
 
 # Radio devices to enable on startup: bluetooth, wifi, wwan.
 # Separate multiple devices with spaces.
 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
 
 # Radio devices to enable on startup: bluetooth, wifi, wwan.
 # Separate multiple devices with spaces.

+# Default: <none>

 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
 
 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
 # (workaround for devices that are blocking shutdown).
 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
 
 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
 # (workaround for devices that are blocking shutdown).

+# Default: <none>

 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
 
 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
 # (to prevent other operating systems from missing radios).
 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
 
 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
 # (to prevent other operating systems from missing radios).

+# Default: <none>

 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
 
 # Radio devices to enable on AC: bluetooth, wifi, wwan.
 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
 
 # Radio devices to enable on AC: bluetooth, wifi, wwan.

+# Default: <none>

 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
 
 # Radio devices to disable on battery: bluetooth, wifi, wwan.
 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
 
 # Radio devices to disable on battery: bluetooth, wifi, wwan.

+# Default: <none>

 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
 DEVICES_TO_DISABLE_ON_BAT="bluetooth"
 
 # Radio devices to disable on battery when not in use (not connected):
 #   bluetooth, wifi, wwan.
 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
 DEVICES_TO_DISABLE_ON_BAT="bluetooth"
 
 # Radio devices to disable on battery when not in use (not connected):
 #   bluetooth, wifi, wwan.

+# Default: <none>

 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
 
 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
 # required). Charging starts when the remaining capacity falls below the
 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
 # Main / Internal battery (values in %)
 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
 
 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
 # required). Charging starts when the remaining capacity falls below the
 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
 # Main / Internal battery (values in %)

+# Default: <none>

 #START_CHARGE_THRESH_BAT0=75
 #STOP_CHARGE_THRESH_BAT0=80
 # Ultrabay / Slice / Replaceable battery (values in %)
 #START_CHARGE_THRESH_BAT0=75
 #STOP_CHARGE_THRESH_BAT0=80
 # Ultrabay / Slice / Replaceable battery (values in %)

+# Default: <none>

 #START_CHARGE_THRESH_BAT1=75
 #STOP_CHARGE_THRESH_BAT1=80
 
 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
 #START_CHARGE_THRESH_BAT1=75
 #STOP_CHARGE_THRESH_BAT1=80
 
 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.

+# Default: 0

 #RESTORE_THRESHOLDS_ON_BAT=1
 
 #RESTORE_THRESHOLDS_ON_BAT=1
 

+# Battery feature drivers: 0=disable, 1=enable
+# Default: 1 (all)
+NATACPI_ENABLE=1
+TPACPI_ENABLE=1
+TPSMAPI_ENABLE=1
+

 # ------------------------------------------------------------------------------
 # tlp-rdw - Parameters for the radio device wizard
 # Possible devices: bluetooth, wifi, wwan.
 
 # ------------------------------------------------------------------------------
 # tlp-rdw - Parameters for the radio device wizard
 # Possible devices: bluetooth, wifi, wwan.
 

-# Hints:
+# Notes:

 # - Parameters are disabled by default, remove the leading # to enable them
 # - Separate multiple radio devices with spaces
 
 # - Parameters are disabled by default, remove the leading # to enable them
 # - Separate multiple radio devices with spaces
 

+# Default: <none> (for all parameters below)
+

 # Radio devices to disable on connect.
 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
 # Radio devices to disable on connect.
 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"


@@ -4380,7 +4506,7 @@ alias mv="mv -iv"
 alias cp="cp -iv"
 alias scl=systemctl
 alias jcl=journalctl
 alias cp="cp -iv"
 alias scl=systemctl
 alias jcl=journalctl

-alias m="mbsync uwaterloo; mbsync amin"
+alias m="mbsync csclub; mbsync uwaterloo; mbsync amin"

 alias best="youtube-dl -f best"
 alias sd="ssh deb"
 alias sf="ssh fp"
 alias best="youtube-dl -f best"
 alias sd="ssh deb"
 alias sf="ssh fp"