+++ /dev/null
-#+title: rc.org
-#+property: header-args :comments link :mkdirp yes :results silent
-
-* About
-
-This org file contains the configuration files of pretty much every
-program I use. The files are tangled (i.e. exported, or derived) from
-this file using =org-babel=.
-
-Note: This file is best viewed inside Emacs with org mode.
-
-* Configs
-
-This section contains the configuration files (dotfiles) of various
-programs I use.
-
-** compton
-:PROPERTIES:
-:header-args+: :tangle ~/.config/compton.conf
-:END:
-
-#+begin_src conf :tangle no
-# Shadow
-shadow = false; # Enabled client-side shadows on windows.
-no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows.
-no-dnd-shadow = true; # Don't draw shadows on DND windows.
-clear-shadow = true; # Zero the part of the shadow's mask behind the
- # window. Fix some weirdness with ARGB windows.
-shadow-radius = 5; # The blur radius for shadows. (default 12)
-shadow-offset-x = -5; # The left offset for shadows. (default -15)
-shadow-offset-y = -5; # The top offset for shadows. (default -15)
-# shadow-opacity = 0.7; # The translucency for shadows. (default .75)
-# shadow-red = 0.0; # Red color value of shadow. (0.0 - 1.0, defaults to 0)
-# shadow-green = 0.0; # Green color value of shadow. (0.0 - 1.0, defaults to 0)
-# shadow-blue = 0.0; # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
-shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ]; # Exclude conditions for shadows.
-# shadow-exclude = "n:e:Notification";
-#shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
-shadow-ignore-shaped = true; # Avoid drawing shadow on all shaped windows
- # (see also: --detect-rounded-corners)
-
-# Opacity
-menu-opacity = 1.0; # The opacity for menus. (default 1.0)
-#inactive-opacity = 0.9; # Default opacity of inactive windows. (0.0 - 1.0)
-# active-opacity = 0.8; # Default opacity for active windows. (0.0 - 1.0)
-frame-opacity = 1.0; # Opacity of window titlebars and borders. (0.1 - 1.0)
-# inactive-opacity-override = true; # Let inactive opacity set by 'inactive-opacity' overrides
- # value of _NET_WM_OPACITY. Bad choice.
-alpha-step = 0.06; # XRender backend: Step size for alpha pictures. Increasing
- # it may result in less X resource usage,
- # Yet fading may look bad.
-#inactive-dim = 0.5; # Dim inactive windows. (0.0 - 1.0)
-#inactive-dim-fixed = true; # Do not let dimness adjust based on window opacity.
-# blur-background = true; # Blur background of transparent windows.
- # Bad performance with X Render backend.
- # GLX backend is preferred.
-# blur-background-frame = true; # Blur background of opaque windows with transparent
- # frames as well.
-blur-background-fixed = true; # Do not let blur radius adjust based on window opacity.
-blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
- # Exclude conditions for background blur.
-
-# Fading
-fading = false; # Fade windows during opacity changes.
-fade-delta = 3; # The time between steps in a fade in milliseconds. (default 10).
-fade-in-step = 0.03; # Opacity change between steps while fading in. (default 0.028).
-fade-out-step = 0.03; # Opacity change between steps while fading out. (default 0.03).
-# no-fading-openclose = true; # Avoid fade windows in/out when opening/closing.
-fade-exclude = [ ]; # Exclude conditions for fading.
-
-# Other
-backend = "glx" # Backend to use: "xrender" or "glx". GLX backend is typically
- # much faster but depends on a sane driver.
-mark-wmwin-focused = true; # Try to detect WM windows and mark them as active.
-mark-ovredir-focused = true; # Mark all non-WM but override-redirect windows active (e.g. menus).
-use-ewmh-active-win = true; # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
- # instead of using FocusIn/Out events. Usually more reliable but
- # depends on a EWMH-compliant WM.
-detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
-detect-client-opacity = true; # Detect _NET_WM_OPACITY on client windows, useful for window
- # managers not passing _NET_WM_OPACITY of client windows to frame
- # windows.
-refresh-rate = 0; # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
-vsync = "drm"; # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
- # See man page for more details.
-dbe = false; # Enable DBE painting mode. Rarely needed.
-paint-on-overlay = true; # Painting on X Composite overlay window. Recommended.
-sw-opti = false; # Limit compton to repaint at most once every 1 / refresh_rate.
- # Incompatible with certain VSync methods.
-unredir-if-possible = false; # Unredirect all windows if a full-screen opaque window is
- # detected, to maximize performance for full-screen windows.
-focus-exclude = [ ]; # A list of conditions of windows that should always be considered
- # focused.
-detect-transient = true; # Use WM_TRANSIENT_FOR to group windows, and consider windows in
- # the same group focused at the same time.
-detect-client-leader = true; # Use WM_CLIENT_LEADER to group windows.
-invert-color-include = [ ]; # Conditions for windows to be painted with inverted color.
-
-# GLX backend # GLX backend fine-tune options. See man page for more info.
-glx-no-stencil = true; # Recommended.
-glx-copy-from-front = false; # Useful with --glx-swap-method,
-# glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
-# glx-no-rebind-pixmap = true; # Recommended if it works.
-glx-no-rebind-pixmap = true; # Recommended if it works.
-#glx-swap-method = "4"; # See man page.
-glx-swap-method = "4"; # See man page.
-
-# Window type settings
-wintypes:
-{
- tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
- menu = { shadow = false; };
- dropdown_menu = { shadow = false; };
- popup_menu = { shadow = false; };
- utility = { shadow = false; };
- # fade: Fade the particular type of windows.
- # shadow: Give those windows shadow
- # opacity: Default opacity for the type of windows.
- # focus: Whether to always consider windows of this type focused.
-};
-#+end_src
-
-** dovecot
-:PROPERTIES:
-:header-args+: :tangle "/sudo::/etc/dovecot/dovecot.conf"
-:END:
-
-#+begin_src conf
-protocols = imap
-
-listen = 127.0.0.1
-log_path = /var/log/dovecot.log
-info_log_path = /var/log/dovecot-info.log
-
-ssl = no
-disable_plaintext_auth = no
-
-auth_verbose = yes
-auth_mechanisms = plain
-
-passdb {
- driver = passwd-file
- args = /etc/dovecot/passwd
-}
-
-userdb {
- driver = static
- args = uid=amin gid=amin home=/home/amin/mail/%d/%n
- default_fields = mail=maildir:/home/amin/mail/%d/%n/mail
-}
-
-# mail_home = /home/amin/mail/%d/%n
-# mail_location = maildir:/home/amin/mail/%d/%n/mail:LAYOUT=fs:INBOX=/home/amin/mail/%d/%n/mail/Inbox
-
-# namespace {
-# inbox = yes
-# separator = /
-# }
-
-mail_plugins = $mail_plugins fts fts_lucene
-
-plugin {
- fts = lucene
- fts_lucene = whitespace_chars=@.
- fts_autoindex = yes
-}
-#+end_src
-
-** Dunst
-:PROPERTIES:
-:header-args+: :tangle ~/.config/dunst/dunstrc
-:END:
-
-#+begin_src conf
-[global]
-#font = Ubuntu Mono 10.5
-font = Inconsolata 11
-
-# Path to default icons.
-icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
-
-icon_position = left
-# <b>bold</b>
-# <i>italic</i>
-# <s>strikethrough<s/>
-# <u>underline</u>
-markup = full
-# The format of the message. Possible variables are:
-# %a appname
-# %s summary
-# %b body
-# %i iconname (including its path)
-# %I iconname (without its path)
-# %p progress value if set ([ 0%] to [100%]) or nothing
-# Markup is allowed
-format = "<b>%s</b>\n%b"
-# Sort messages by urgency
-sort = yes
-# Show how many messages are currently hidden (because of geometry)
-indicate_hiddenl= no
-# Alignment of message text.
-# Possible values are "left", "center" and "right"
-alignment = center
-# The frequency with wich text that is longer than the notification
-# window allows bounces back and forth.
-# This option conflicts with 'word_wrap'.
-# Set to 0 to disable
-bounce_freq = 3
-# show age of message if message is older than show_age_threshold seconds.
-# set to -1 to disable
-show_age_threshold = -1
-# split notifications into multiple lines if they don't fit into geometry
-word_wrap = yes
-# ignore newlines '\n' in notifications
-ignore_newline = no
-# The geometry of the message window.
-# geometry [{width}]x{height}][+/-{x}+/-{y}]
-# The height is measured in number of notifications everything else in pixels. If the width
-# is omitted but the height is given ("-geometry x2"), the message window
-# expands over the whole screen (dmenu-like). If width is 0,
-# the window expands to the longest message displayed.
-# A positive x is measured from the left, a negative from the
-# right side of the screen. Y is measured from the top and down respectevly.
-# The width can be negative. In this case the actual width is the
-# screen width minus the width defined in within the geometry option.
-#geometry = "410x12-12+12"
-#geometry = "0x0-30-30"
-geometry = "260x12-30-30"
-# The transparency of the window. range: [0; 100]
-# This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
-transparency = 0
-# Don't remove messages, if the user is idle (no mouse or keyboard input)
-# for longer than idle_threshold seconds.
-# Set to 0 to disable.
-idle_threshold = 120
-# Which monitor should the notifications be displayed on.
-monitor = 0
-# Display notification on focused monitor. Possible modes are:
-# mouse: follow mouse pointer
-# keyboard: follow window with keyboard focus
-# none: don't follow anything
-#
-# "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
-# This should be the case for almost all modern windowmanagers.
-#
-# If this option is set to mouse or keyboard, the monitor option will be
-# ignored.
-follow = keyboard
-# should a notification popped up from history be sticky or
-# timeout as if it would normally do.
-sticky_history = yes
-# The height of a single line. If the height is smaller than the font height,
-# it will get raised to the font height.
-# This adds empty space above and under the text.
-line_height = 0
-
-show_indicators = yes
-
-# Draw a line of 'separatpr_height' pixel height between two notifications.
-# Set to 0 to disable
-separator_height = 3
-# padding between text and separator
-padding = 8
-# horizontal padding
-horizontal_padding = 8
-# Define a color for the separator.
-# possible values are:
-# * auto: dunst tries to find a color fitting to the background
-# * foreground: use the same color as the foreground
-# * frame: use the same color as the frame.
-# * anything else will be interpreted as a X color
-separator_color = foreground
-# print a notification on startup
-# This is mainly for error detection, since dbus (re-)starts dunst
-# automatically after a crash.
-startup_notification = false
-# dmenu path
-#dmenu = /usr/bin/dmenu -p dunst:
-dmenu = /usr/bin/rofi -dmenu -p dunst:
-# browser for opening urls in context menu
-browser = /usr/bin/firefox -new-tab
-[frame]
-width = 0
-color = "#377222"
-[shortcuts]
-# shortcuts are specified as [modifier+][modifier+]...key
-# available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
-# and 'mod4' (windows-key)
-# xev might be helpful to find names for keys
-# close notification
-close = ctrl+space
-# close all notifications
-close_all = ctrl+shift+space
-# redisplay last message(s)
-# On the US keyboard layout 'grave' is normally above TAB and left of '1'.
-history = ctrl+shift+h
-# context menu
-context = ctrl+shift+period
-[urgency_low]
-# IMPORTANT: colors have to be defined in quotation marks.
-# Otherwise the '#' and following would be interpreted as a comment.
-background = "#1d2a30"
-foreground = "#71c2af"
-timeout = 3
-[urgency_normal]
-background = "#1d2a30"
-foreground = "#71c2af"
-timeout = 0
-[urgency_critical]
-background = "#1d2a30"
-foreground = "#ff9982"
-timeout = 0
-
-# Every section that isn't one of the above is interpreted as a rules
-# to override settings for certain messages.
-# Messages can be matched by 'appname', 'summary', 'body' or 'icon'
-# and you can override the 'timeout', 'urgency', 'foreground', 'background'
-# and 'format'.
-# Shell-like globbing will get expanded.
-#
-# SCRIPTING
-# you can specify a script that gets run when the rule matches by setting
-# the 'script' option.
-# The script will be called as follows:
-# script appname summary body icon urgency
-# where urgency can be "LOW", "NORMAL" or "CRITICAL".
-#
-# NOTE: if you don't want a notification to be displayed, set the format to ""
-# NOTE: It might be helpful to run dunst -print in a terminal in order to find
-# fitting options for rules.
-#[espeak]
-# summary = "*"
-# script = dunst_espeak.sh
-#[script-test]
-# summary = "*script*"
-# script = dunst_test.sh
-#[ignore]
-## This notification will not be displayed
-# summary = "foobar"
-# format = ""
-#[signed_on]
-# appname = Pidgin
-# summary = "*signed on*"
-# urgency = low
-#
-#[signed_off]
-# appname = Pidgin
-# summary = *signed off*
-# urgency = low
-#
-#[says]
-# appname = Pidgin
-# summary = *says*
-# urgency = critical
-#
-#[twitter]
-# appname = Pidgin
-# summary = *twitter.com*
-# urgency = normal
-#
-[xfpm-backlight]
- summary = *Brightness*
- urgency = low
-#+end_src
-
-** Fontconfig
-:PROPERTIES:
-:header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
-:END:
-
-#+begin_src xml
-<?xml version="1.0"?>
-<!DOCTYPE fontconfig SYSTEM "fonts.dtd">
-<fontconfig>
- <match target="font">
- <edit mode="assign" name="rgba">
- <const>rgb</const>
- </edit>
- </match>
- <match target="font">
- <edit mode="assign" name="hinting">
- <bool>true</bool>
- </edit>
- </match>
- <match target="font">
- <edit mode="assign" name="hintstyle">
- <const>hintslight</const>
- </edit>
- </match>
- <match target="font">
- <edit mode="assign" name="antialias">
- <bool>true</bool>
- </edit>
- </match>
- <match target="font">
- <edit mode="assign" name="lcdfilter">
- <const>lcddefault</const>
- </edit>
- </match>
- <dir>~/.fonts</dir>
-
- <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
- <alias binding="same">
- <family>Helvetica</family>
- <prefer>
- <family>Liberation Sans</family>
- </prefer>
-</alias>
-</fontconfig>
-#+end_src
-
-** getmail
-
-*** getmailrc
-:PROPERTIES:
-:header-args+: :tangle ~/.getmail/getmailrc
-:END:
-
-#+begin_src conf
-[retriever]
-type = SimplePOP3SSLRetriever
-server = fencepost.gnu.org
-username = bandali
-password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
-port = 995
-use_apop = True
-
-[destination]
-type = Maildir
-path = ~/mail/gnu/Inbox/
-
-# [destination]
-# type = MDA_external
-# path = /usr/lib/dovecot/deliver
-# arguments = ('-d', 'amin@aminb.org')
-
-[options]
-delete = True
-#+end_src
-
-*** getmail.service
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/getmail.service
-:END:
-
-#+begin_src conf :tangle no
-[Unit]
-Description=getmail service
-
-[Service]
-Type=oneshot
-ExecStart=/usr/bin/getmail
-StandardOutput=syslog
-StandardError=syslog
-#+end_src
-
-*** getmail.timer
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/getmail.timer
-:END:
-
-#+begin_src conf :tangle no
-[Unit]
-Description=getmail timer
-
-[Timer]
-OnCalendar=*:0/30
-Persistent=true
-Unit=getmail.service
-
-[Install]
-WantedBy=timers.target
-#+end_src
-
-** Git
-
-*** gitconfig
-:PROPERTIES:
-:header-args+: :tangle ~/.gitconfig
-:END:
-
-**** user
-#+begin_src conf
-[user]
- name = Amin Bandali
- email = bandali@gnu.org
- signingkey = BE6273738E616D6D1B3A08E8A21A020248816103
-#+end_src
-
-**** signing
-#+begin_src conf
-[commit]
- gpgsign = true
-# [format]
-# signoff = true
-#+end_src
-
-**** core
-#+begin_src conf
-[core]
- autocrlf = input # CRLF -> LF on commit
- editor = emacsclient -t
- excludesfile = ~/.gitignore_global
- pager = "less"
-#+end_src
-
-**** gpg
-#+begin_src conf
-[gpg]
- program = gpg2
-#+end_src
-
-**** alias
-#+begin_src conf
-[alias]
- git = !exec git # handle nested git calls, e.g. git git status
- aliases = config --get-regexp '^alias\\.'
- a = add
- s = status
- sl = status --long
- c = checkout
- cb = checkout -b
- b = branch
- r = rebase
- p = pull
- pr = pull --rebase
- ps = push
- psf = push --force
- nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f"
- nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f"
-#+end_src
-
-**** color
-#+begin_src conf
-[color]
- ui = auto
-[color "status"]
- added = green bold
- changed = red bold
- untracked = red bold
-[color "branch"]
- current = green bold
- remote = magenta bold
-[color "diff"]
- new = green bold
- old = red bold
-#+end_src
-
-**** status
-#+begin_src conf
-[status]
- # showUntrackedFiles = all
- short=true
- branch=true
-#+end_src
-
-**** github
-#+begin_src conf
-[github]
- user = aminb
-#+end_src
-
-**** send-email
-#+begin_src conf
-[sendemail]
- smtpuser = bandali
- smtpserver = fencepost.gnu.org
- smtpserverport = 587
- smtpencryption = tls
- annotate = yes
-#+end_src
-
-*** gitignore
-:PROPERTIES:
-:header-args+: :tangle ~/.gitignore_global
-:END:
-
-#+begin_src conf
-*.orig
-*.py[co]
-*.sublime-workspace
-*~
-.DS_Store
-*.elc
-*-autoloads.el
-#+end_src
-
-** GnuPG
-:PROPERTIES:
-:header-args+: :tangle ~/.gnupg/gpg-agent.conf
-:END:
-
-#+begin_src conf
-default-cache-ttl 43200
-max-cache-ttl 43200
-
-default-cache-ttl-ssh 10800
-max-cache-ttl-ssh 10800
-
-# pinentry-program /usr/bin/pinentry-qt
-#+end_src
-
-** GTK
-
-*** gtk-2.0
-:PROPERTIES:
-:header-args+: :tangle ~/.gtkrc-2.0
-:END:
-
-#+begin_src conf
-gtk-theme-name="Greybird"
-gtk-icon-theme-name="Paper"
-gtk-font-name="Ubuntu 10"
-gtk-menu-images=0
-# gtk-key-theme-name = "Emacs"
-#+end_src
-
-*** gtk-3.0
-:PROPERTIES:
-:header-args+: :tangle ~/.config/gtk-3.0/settings.ini
-:END:
-
-#+begin_src conf :tangle no
-[Settings]
-gtk-icon-theme-name = Paper
-# gtk-theme-name = Adwaita
-
-gtk-theme-name = Greybird
-# gtk-theme-name = Arc-Darker
-# gtk-theme-name = Numix-ArchBlue
-
-gtk-font-name = Ubuntu 10
-# gtk-key-theme-name = Emacs
-#+end_src
-
-** [[https://github.com/Leinnan/i3gs][i3gs]]
-:PROPERTIES:
-:header-args+: :tangle ~/.config/i3gs/config
-:END:
-
-#+begin_src conf :comments none :tangle no
-borders_width=0 0 2 0
-separator_width=10
-
-#[mpd]
-#preset=MPD
-#title=<span weight='heavy' fgcolor='#7FDBFF'> </span>
-#borders_color=#7FDBFF
-
-[ram]
-preset=RAM
-title=<span weight='heavy' fgcolor='#3D9970'> </span>
-borders_color=#3D9970
-
-#[cpu]
-#preset=CPU
-#title=<span weight='heavy' fgcolor='#2ECC40'> </span>
-#borders_color=#2ECC40
-
-#[hdd]
-#preset=HDD
-#title=<span weight='heavy' fgcolor='#01FF70'> </span>
-#borders_color=#01FF70
-
-[volume]
-command=volume-info
-title=<span weight='heavy' fgcolor='#7FDBFF'></span>
-borders_color=#7FDBFF
-
-[battery]
-preset=BAT
-command=battery-percentage-time
-title=<span weight='heavy' fgcolor='#39CCCC'> </span>
-borders_color=#39CCCC
-
-[wifi]
-preset=WIFI
-title=<span weight='heavy' fgcolor='#01FF70'> </span>
-borders_color=#01FF70
-
-[date]
-preset=DATE
-command=date '+%-I:%M, %a %b %d '
-title=<span weight='heavy' fgcolor='#FFDC00'> </span>
-borders_color=#FFDC00
-separator_width=0
-#+end_src
-
-** i3status
-:PROPERTIES:
-:header-args+: :tangle ~/.config/i3status/config
-:END:
-
-#+begin_src conf :comments none
-# i3status configuration file.
-# see "man i3status" for documentation.
-
-# It is important that this file is edited as UTF-8.
-# The following line should contain a sharp s:
-# ß
-# If the above line is not correctly displayed, fix your editor first!
-
-general {
- colors = true
- interval = 5
- output_format = "i3bar"
-}
-
-# order += "ipv6"
-order += "disk /"
-order += "disk /data"
-# order += "wireless _first_"
-order += "ethernet _first_"
-order += "battery 0"
-order += "volume master"
-order += "load"
-order += "tztime local"
-
-wireless _first_ {
- format_up = "W:%quality %essid %ip"
- format_down = "W: down"
-}
-
-ethernet _first_ {
- # if you use %speed, i3status requires root privileges
- format_up = "E: %ip (%speed)"
- format_down = "E: down"
-}
-
-battery 0 {
- format = "%status %percentage %remaining (%consumption)"
- path = "/sys/class/power_supply/BAT%d/uevent"
- low_threshold = "10"
- threshold_type = "percentage"
- last_full_capacity = true
- integer_battery_capacity = true
- hide_seconds = true
-}
-
-tztime local {
- format = "%-I:%M%P %a %b %d"
-}
-
-volume master {
- format = "♪ %volume"
- format_muted = "🔇 %volume"
- device = "pulse"
-}
-
-load {
- format = "%1min"
-}
-
-disk "/" {
- format = "/ %avail"
-}
-
-disk "/data" {
- format = "/data %avail"
-}
-#+end_src
-
-** isync
-
-*** mbsyncrc
-:PROPERTIES:
-:header-args+: :tangle ~/.mbsyncrc
-:END:
-
-#+begin_src conf
-# Global defaults
-CopyArrivalDate yes
-Create Both
-Expunge Both
-
-######
-IMAPAccount amin
-Host mail.bndl.org
-User amin@bndl.org
-PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
-SSLType IMAPS
-
-IMAPStore amin-remote
-Account amin
-
-IMAPAccount amin-dovecot
-Host 127.0.0.1
-Port 143
-User amin@bndl.org
-PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin-dovecot.gpg"
-SSLType None
-
-IMAPStore amin-local
-Account amin-dovecot
-
-Channel amin
-Master :amin-remote:
-Slave :amin-local:
-Patterns *
-
-######
-IMAPAccount uwaterloo
-Host connect.uwaterloo.ca
-User abandali
-PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
-SSLType IMAPS
-
-IMAPStore uwaterloo-remote
-Account uwaterloo
-
-IMAPAccount uwaterloo-dovecot
-Host 127.0.0.1
-Port 143
-User abandali@uwaterloo.ca
-PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo-dovecot.gpg"
-SSLType None
-
-IMAPStore uwaterloo-local
-Account uwaterloo-dovecot
-
-Channel uwaterloo
-Master :uwaterloo-remote:
-Slave :uwaterloo-local:
-Patterns *
-
-######
-IMAPAccount csclub
-Host mail.csclub.uwaterloo.ca
-User abandali
-PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/csclub.gpg"
-SSLType IMAPS
-
-IMAPStore csclub-remote
-Account csclub
-
-IMAPAccount csclub-dovecot
-Host 127.0.0.1
-Port 143
-User abandali@csclub.uw
-PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/csclub-dovecot.gpg"
-SSLType None
-
-IMAPStore csclub-local
-Account csclub-dovecot
-
-Channel csclub
-Master :csclub-remote:
-Slave :csclub-local:
-Patterns *
-#+end_src
-
-*** mbsync.service
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/mbsync.service
-:END:
-
-#+begin_src conf :tangle no
-[Unit]
-Description=mbsync service
-
-[Service]
-Type=oneshot
-ExecStart=/usr/bin/mbsync -Va
-StandardOutput=syslog
-StandardError=syslog
-#+end_src
-
-*** mbsync.timer
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/mbsync.timer
-:END:
-
-#+begin_src conf :tangle no
-[Unit]
-Description=mbsync timer
-
-[Timer]
-OnCalendar=*:0/15
-Persistent=true
-Unit=mbsync.service
-
-[Install]
-WantedBy=timers.target
-#+end_src
-
-** Latexmk
-:PROPERTIES:
-:header-args+: :tangle ~/.latexmkrc
-:END:
-
-#+begin_src conf
-$pdf_previewer = "start zathura %O %S";
-$clean_ext = "aux out";
-
-# $pdf_update_method = 4;
-# $pdf_update_command = "zathura %O %S";
-
-# Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
-# by Ctrl+click in the PDF.
-# Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
-# editor.
-# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
-#+end_src
-
-** libinput
-
-Improve XPS 15 9560's touchpad experience.
-
-# begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
-#+begin_src conf :tangle no
-Section "InputClass"
- Identifier "libinput touchpad catchall"
- Driver "libinput"
- MatchIsTouchpad "on"
- Option "ClickMethod" "clickfinger"
- Option "NaturalScrolling" "true"
- Option "Tapping" "on"
- Option "TappingButtonMap" "lrm"
-EndSection
-#+end_src
-
-** mkinitcpio
-
-#+begin_src conf :tangle /sudo::/etc/mkinitcpio.conf :comments none
-# vim:set ft=sh
-# MODULES
-# The following modules are loaded before any boot hooks are
-# run. Advanced users may wish to specify all system modules
-# in this array. For instance:
-# MODULES=(piix ide_disk reiserfs)
-MODULES=(i915)
-
-# BINARIES
-# This setting includes any additional binaries a given user may
-# wish into the CPIO image. This is run last, so it may be used to
-# override the actual binaries included by a given hook
-# BINARIES are dependency parsed, so you may safely ignore libraries
-BINARIES=()
-
-# FILES
-# This setting is similar to BINARIES above, however, files are added
-# as-is and are not parsed in any way. This is useful for config files.
-FILES=()
-
-# HOOKS
-# This is the most important setting in this file. The HOOKS control the
-# modules and scripts added to the image, and what happens at boot time.
-# Order is important, and it is recommended that you do not change the
-# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
-# help on a given hook.
-# 'base' is _required_ unless you know precisely what you are doing.
-# 'udev' is _required_ in order to automatically load modules
-# 'filesystems' is _required_ unless you specify your fs modules in MODULES
-# Examples:
-## This setup specifies all modules in the MODULES setting above.
-## No raid, lvm2, or encrypted root is needed.
-# HOOKS=(base)
-#
-## This setup will autodetect all modules for your system and should
-## work as a sane default
-# HOOKS=(base udev autodetect block filesystems)
-#
-## This setup will generate a 'full' image which supports most systems.
-## No autodetection is done.
-# HOOKS=(base udev block filesystems)
-#
-## This setup assembles a pata mdadm array with an encrypted root FS.
-## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
-# HOOKS=(base udev block mdadm encrypt filesystems)
-#
-## This setup loads an lvm2 volume group on a usb device.
-# HOOKS=(base udev block lvm2 filesystems)
-#
-## NOTE: If you have /usr on a separate partition, you MUST include the
-# usr, fsck and shutdown hooks.
-HOOKS=(base udev autodetect modconf block keyboard encrypt lvm2 resume filesystems fsck)
-
-# COMPRESSION
-# Use this to compress the initramfs image. By default, gzip compression
-# is used. Use 'cat' to create an uncompressed image.
-#COMPRESSION="gzip"
-#COMPRESSION="bzip2"
-#COMPRESSION="lzma"
-#COMPRESSION="xz"
-#COMPRESSION="lzop"
-#COMPRESSION="lz4"
-
-# COMPRESSION_OPTIONS
-# Additional options for the compressor
-#COMPRESSION_OPTIONS=()
-#+end_src
-
-** mpd
-:PROPERTIES:
-:header-args+: :tangle ~/.config/mpd/mpd.conf
-:END:
-
-#+begin_src conf
-# An example configuration file for MPD.
-# Read the user manual for documentation: http://www.musicpd.org/doc/user/
-
-
-# Files and directories #######################################################
-#
-# This setting controls the top directory which MPD will search to discover the
-# available audio files and add them to the daemon's online database. This
-# setting defaults to the XDG directory, otherwise the music directory will be
-# be disabled and audio files will only be accepted over ipc socket (using
-# file:// protocol) or streaming files over an accepted protocol.
-#
-music_directory "~/usr/music"
-#
-# This setting sets the MPD internal playlist directory. The purpose of this
-# directory is storage for playlists created by MPD. The server will use
-# playlist files not created by the server but only if they are in the MPD
-# format. This setting defaults to playlist saving being disabled.
-#
-playlist_directory "~/.mpd/playlists"
-#
-# This setting sets the location of the MPD database. This file is used to
-# load the database at server start up and store the database while the
-# server is not up. This setting defaults to disabled which will allow
-# MPD to accept files over ipc socket (using file:// protocol) or streaming
-# files over an accepted protocol.
-#
-db_file "~/.mpd/database"
-#
-# These settings are the locations for the daemon log files for the daemon.
-# These logs are great for troubleshooting, depending on your log_level
-# settings.
-#
-# The special value "syslog" makes MPD use the local syslog daemon. This
-# setting defaults to logging to syslog, otherwise logging is disabled.
-#
-log_file "~/.mpd/log"
-#
-# This setting sets the location of the file which stores the process ID
-# for use of mpd --kill and some init scripts. This setting is disabled by
-# default and the pid file will not be stored.
-#
-pid_file "~/.mpd/pid"
-#
-# This setting sets the location of the file which contains information about
-# most variables to get MPD back into the same general shape it was in before
-# it was brought down. This setting is disabled by default and the server
-# state will be reset on server start up.
-#
-state_file "~/.mpd/state"
-#
-# The location of the sticker database. This is a database which
-# manages dynamic information attached to songs.
-#
-sticker_file "~/.mpd/sticker.sql"
-#
-###############################################################################
-
-
-# General music daemon options ################################################
-#
-# This setting specifies the user that MPD will run as. MPD should never run as
-# root and you may use this setting to make MPD change its user ID after
-# initialization. This setting is disabled by default and MPD is run as the
-# current user.
-#
-#user "nobody"
-#
-# This setting specifies the group that MPD will run as. If not specified
-# primary group of user specified with "user" setting will be used (if set).
-# This is useful if MPD needs to be a member of group such as "audio" to
-# have permission to use sound card.
-#
-#group "nogroup"
-#
-# This setting sets the address for the daemon to listen on. Careful attention
-# should be paid if this is assigned to anything other then the default, any.
-# This setting can deny access to control of the daemon. Not effective if
-# systemd socket activiation is in use.
-#
-# For network
-#bind_to_address "any"
-#
-# And for Unix Socket
-#bind_to_address "~/.mpd/socket"
-#
-# This setting is the TCP port that is desired for the daemon to get assigned
-# to.
-#
-#port "6600"
-#
-# This setting controls the type of information which is logged. Available
-# setting arguments are "default", "secure" or "verbose". The "verbose" setting
-# argument is recommended for troubleshooting, though can quickly stretch
-# available resources on limited hardware storage.
-#
-#log_level "default"
-#
-# If you have a problem with your MP3s ending abruptly it is recommended that
-# you set this argument to "no" to attempt to fix the problem. If this solves
-# the problem, it is highly recommended to fix the MP3 files with vbrfix
-# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
-# point gapless MP3 playback can be enabled.
-#
-#gapless_mp3_playback "yes"
-#
-# Setting "restore_paused" to "yes" puts MPD into pause mode instead
-# of starting playback after startup.
-#
-#restore_paused "no"
-#
-# This setting enables MPD to create playlists in a format usable by other
-# music players.
-#
-#save_absolute_paths_in_playlists "no"
-#
-# This setting defines a list of tag types that will be extracted during the
-# audio file discovery process. The complete list of possible values can be
-# found in the user manual.
-#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
-#
-# This setting enables automatic update of MPD's database when files in
-# music_directory are changed.
-#
-#auto_update "yes"
-#
-# Limit the depth of the directories being watched, 0 means only watch
-# the music directory itself. There is no limit by default.
-#
-#auto_update_depth "3"
-#
-###############################################################################
-
-
-# Symbolic link behavior ######################################################
-#
-# If this setting is set to "yes", MPD will discover audio files by following
-# symbolic links outside of the configured music_directory.
-#
-#follow_outside_symlinks "yes"
-#
-# If this setting is set to "yes", MPD will discover audio files by following
-# symbolic links inside of the configured music_directory.
-#
-#follow_inside_symlinks "yes"
-#
-###############################################################################
-
-
-# Zeroconf / Avahi Service Discovery ##########################################
-#
-# If this setting is set to "yes", service information will be published with
-# Zeroconf / Avahi.
-#
-#zeroconf_enabled "yes"
-#
-# The argument to this setting will be the Zeroconf / Avahi unique name for
-# this MPD server on the network.
-#
-#zeroconf_name "Music Player"
-#
-###############################################################################
-
-
-# Permissions #################################################################
-#
-# If this setting is set, MPD will require password authorization. The password
-# setting can be specified multiple times for different password profiles.
-#
-#password "password@read,add,control,admin"
-#
-# This setting specifies the permissions a user has who has not yet logged in.
-#
-#default_permissions "read,add,control,admin"
-#
-###############################################################################
-
-
-# Database #######################################################################
-#
-
-#database {
-# plugin "proxy"
-# host "other.mpd.host"
-# port "6600"
-#}
-
-# Input #######################################################################
-#
-
-input {
- plugin "curl"
-# proxy "proxy.isp.com:8080"
-# proxy_user "user"
-# proxy_password "password"
-}
-
-#
-###############################################################################
-
-# Audio Output ################################################################
-#
-
-audio_output {
- type "pulse"
- name "pulse audio"
-}
-
-audio_output {
- type "fifo"
- name "my_fifo"
- path "/tmp/mpd.fifo"
- format "44100:16:2"
-}
-
-# MPD supports various audio output types, as well as playing through multiple
-# audio outputs at the same time, through multiple audio_output settings
-# blocks. Setting this block is optional, though the server will only attempt
-# autodetection for one sound card.
-#
-# An example of an ALSA output:
-#
-#audio_output {
-# type "alsa"
-# name "My ALSA Device"
-## device "hw:0,0" # optional
-## mixer_type "hardware" # optional
-## mixer_device "default" # optional
-## mixer_control "PCM" # optional
-## mixer_index "0" # optional
-#}
-#
-# An example of an OSS output:
-#
-#audio_output {
-# type "oss"
-# name "My OSS Device"
-## device "/dev/dsp" # optional
-## mixer_type "hardware" # optional
-## mixer_device "/dev/mixer" # optional
-## mixer_control "PCM" # optional
-#}
-#
-# An example of a shout output (for streaming to Icecast):
-#
-#audio_output {
-# type "shout"
-# encoder "vorbis" # optional
-# name "My Shout Stream"
-# host "localhost"
-# port "8000"
-# mount "/mpd.ogg"
-# password "hackme"
-# quality "5.0"
-# bitrate "128"
-# format "44100:16:1"
-## protocol "icecast2" # optional
-## user "source" # optional
-## description "My Stream Description" # optional
-## url "http://example.com" # optional
-## genre "jazz" # optional
-## public "no" # optional
-## timeout "2" # optional
-## mixer_type "software" # optional
-#}
-#
-# An example of a recorder output:
-#
-#audio_output {
-# type "recorder"
-# name "My recorder"
-# encoder "vorbis" # optional, vorbis or lame
-# path "/var/lib/mpd/recorder/mpd.ogg"
-## quality "5.0" # do not define if bitrate is defined
-# bitrate "128" # do not define if quality is defined
-# format "44100:16:1"
-#}
-#
-# An example of a httpd output (built-in HTTP streaming server):
-#
-#audio_output {
-# type "httpd"
-# name "My HTTP Stream"
-# encoder "vorbis" # optional, vorbis or lame
-# port "8000"
-# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
-## quality "5.0" # do not define if bitrate is defined
-# bitrate "128" # do not define if quality is defined
-# format "44100:16:1"
-# max_clients "0" # optional 0=no limit
-#}
-#
-# An example of a pulseaudio output (streaming to a remote pulseaudio server)
-#
-#audio_output {
-# type "pulse"
-# name "My Pulse Output"
-## server "remote_server" # optional
-## sink "remote_server_sink" # optional
-#}
-#
-# An example of a winmm output (Windows multimedia API).
-#
-#audio_output {
-# type "winmm"
-# name "My WinMM output"
-## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
-# or
-## device "0" # optional
-## mixer_type "hardware" # optional
-#}
-#
-# An example of an openal output.
-#
-#audio_output {
-# type "openal"
-# name "My OpenAL output"
-## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
-#}
-#
-# An example of an sndio output.
-#
-#audio_output {
-# type "sndio"
-# name "sndio output"
-# mixer_type "software"
-#}
-#
-# An example of an OS X output:
-#
-#audio_output {
-# type "osx"
-# name "My OS X Device"
-## device "Built-in Output" # optional
-## channel_map "-1,-1,0,1" # optional
-#}
-#
-## Example "pipe" output:
-#
-#audio_output {
-# type "pipe"
-# name "my pipe"
-# command "aplay -f cd 2>/dev/null"
-## Or if you're want to use AudioCompress
-# command "AudioCompress -m | aplay -f cd 2>/dev/null"
-## Or to send raw PCM stream through PCM:
-# command "nc example.org 8765"
-# format "44100:16:2"
-#}
-#
-## An example of a null output (for no audio output):
-#
-#audio_output {
-# type "null"
-# name "My Null Output"
-# mixer_type "none" # optional
-#}
-#
-###############################################################################
-
-
-# Normalization automatic volume adjustments ##################################
-#
-# This setting specifies the type of ReplayGain to use. This setting can have
-# the argument "off", "album", "track" or "auto". "auto" is a special mode that
-# chooses between "track" and "album" depending on the current state of
-# random playback. If random playback is enabled then "track" mode is used.
-# See <http://www.replaygain.org> for more details about ReplayGain.
-# This setting is off by default.
-#
-#replaygain "album"
-#
-# This setting sets the pre-amp used for files that have ReplayGain tags. By
-# default this setting is disabled.
-#
-#replaygain_preamp "0"
-#
-# This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
-# By default this setting is disabled.
-#
-#replaygain_missing_preamp "0"
-#
-# This setting enables or disables ReplayGain limiting.
-# MPD calculates actual amplification based on the ReplayGain tags
-# and replaygain_preamp / replaygain_missing_preamp setting.
-# If replaygain_limit is enabled MPD will never amplify audio signal
-# above its original level. If replaygain_limit is disabled such amplification
-# might occur. By default this setting is enabled.
-#
-#replaygain_limit "yes"
-#
-# This setting enables on-the-fly normalization volume adjustment. This will
-# result in the volume of all playing audio to be adjusted so the output has
-# equal "loudness". This setting is disabled by default.
-#
-#volume_normalization "no"
-#
-###############################################################################
-
-# Character Encoding ##########################################################
-#
-# If file or directory names do not display correctly for your locale then you
-# may need to modify this setting.
-#
-#filesystem_charset "UTF-8"
-#
-###############################################################################
-#+end_src
-
-** msmtp
-:PROPERTIES:
-:header-args+: :tangle ~/.msmtprc
-:END:
-
-#+begin_src conf
-# Set default values for all following accounts.
-defaults
-port 587
-tls on
-auth on
-#tls_trust_file /etc/ssl/certs/ca-certificates.crt
-logfile ~/.msmtp.log
-
-# amin
-account amin
-host mail.bndl.org
-# use `msmtp -a amin --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
-tls_fingerprint B8:17:DF:D7:26:56:4F:CD:F0:51:D5:E5:4C:44:B6:F1:C9:47:E7:A2:C7:36:C9:C1:F2:10:85:18:43:72:9D:ED
-tls_starttls on
-from amin@bndl.org
-user amin@bndl.org
-passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
-
-account aminb : amin
-from amin@aminb.org
-
-# gnu
-account gnu
-host fencepost.gnu.org
-# use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
-tls_fingerprint FB:DB:E3:7D:96:22:22:20:9F:4A:FD:70:96:99:50:5C:39:B2:29:D9:47:47:52:A8:5A:4A:DF:70:9D:21:DE:C4
-tls_starttls on
-from bandali@gnu.org
-user bandali
-passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
-
-# gnu (old)
-account gnu-aminb : gnu
-from aminb@gnu.org
-account gnu-amin : gnu
-from amin@gnu.org
-account gnu-mab : gnu
-from mab@gnu.org
-
-# uwaterloo
-account uwaterloo
-host connect.uwaterloo.ca
-tls_starttls on
-from abandali@uwaterloo.ca
-user abandali
-passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
-tls_trust_file /etc/ssl/certs/ca-certificates.crt
-
-# csclub
-account csclub
-host mail.csclub.uwaterloo.ca
-tls_starttls on
-from abandali@csclub.uwaterloo.ca
-user abandali
-passwordeval gpg2 --no-tty -q -d ~/.passwd/csclub.gpg
-tls_trust_file /etc/ssl/certs/ca-certificates.crt
-
-# Set a default account
-account default : amin
-#+end_src
-
-** ncmpcpp
-
-*** config
-:PROPERTIES:
-:header-args+: :tangle ~/.ncmpcpp/config
-:END:
-
-#+begin_src conf :tangle no
-##############################################################
-## This is the example configuration file. Copy it to ##
-## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
-## and set up your preferences. ##
-##############################################################
-#
-##### directories ######
-##
-## Directory for storing ncmpcpp related files.
-## Changing it is useful if you want to store
-## everything somewhere else and provide command
-## line setting for alternative location to config
-## file which defines that while launching ncmpcpp.
-##
-#
-ncmpcpp_directory = ~/.ncmpcpp
-#
-##
-## Directory for storing downloaded lyrics. It
-## defaults to ~/.lyrics since other MPD clients
-## (eg. ncmpc) also use that location.
-##
-#
-#lyrics_directory = ~/.lyrics
-#
-##### connection settings #####
-#
-#mpd_host = localhost
-#
-#mpd_port = 6600
-#
-#mpd_connection_timeout = 5
-#
-## Needed for tag editor and file operations to work.
-##
-mpd_music_dir = ~/usr/music
-#
-#mpd_crossfade_time = 5
-#
-##### music visualizer #####
-##
-## Note: In order to make music visualizer work you'll
-## need to use mpd fifo output, whose format parameter
-## has to be set to 44100:16:1 for mono visualization
-## or 44100:16:2 for stereo visualization. Example
-## configuration (it has to be put into mpd.conf):
-##
-## audio_output {
-## type "fifo"
-## name "Visualizer feed"
-## path "/tmp/mpd.fifo"
-## format "44100:16:2"
-## }
-##
-#
-visualizer_fifo_path = /tmp/mpd.fifo
-#
-##
-## Note: Below parameter is needed for ncmpcpp
-## to determine which output provides data for
-## visualizer and thus allow syncing between
-## visualization and sound as currently there
-## are some problems with it.
-##
-#
-visualizer_output_name = my fifo
-#
-##
-## If you set format to 44100:16:2, make it 'yes'.
-##
-visualizer_in_stereo = yes
-#
-##
-## Multiply received samples by given value. Very
-## useful for proper visualization of quiet music.
-##
-#visualizer_sample_multiplier = 1
-#
-##
-## Note: Below parameter defines how often ncmpcpp
-## has to "synchronize" visualizer and audio outputs.
-## 30 seconds is optimal value, but if you experience
-## synchronization problems, set it to lower value.
-## Keep in mind that sane values start with >=10.
-##
-#
-visualizer_sync_interval = 30
-#
-##
-## Note: To enable spectrum frequency visualization
-## you need to compile ncmpcpp with fftw3 support.
-##
-#
-## Available values: spectrum, wave, wave_filled, ellipse.
-##
-visualizer_type = spectrum
-#
-#visualizer_look = ●▮
-visualizer_look = "●•"
-#
-#visualizer_color = blue, cyan, green, yellow, magenta, red
-#
-## Alternative subset of 256 colors for terminals that support it.
-##
-#visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
-#
-##### system encoding #####
-##
-## ncmpcpp should detect your charset encoding
-## but if it failed to do so, you can specify
-## charset encoding you are using here.
-##
-## Note: You can see whether your ncmpcpp build
-## supports charset detection by checking output
-## of `ncmpcpp --version`.
-##
-## Note: Since MPD uses UTF-8 by default, setting
-## this option makes sense only if your encoding
-## is different.
-##
-#
-#system_encoding = ""
-#
-##### delays #####
-#
-## Time of inactivity (in seconds) after playlist
-## highlighting will be disabled (0 = always on).
-##
-#playlist_disable_highlight_delay = 5
-#
-## Defines how long messages are supposed to be visible.
-##
-#message_delay_time = 5
-#
-##### song format #####
-##
-## For a song format you can use:
-##
-## %l - length
-## %f - filename
-## %D - directory
-## %a - artist
-## %A - album artist
-## %t - title
-## %b - album
-## %y - date
-## %n - track number (01/12 -> 01)
-## %N - full track info (01/12 -> 01/12)
-## %g - genre
-## %c - composer
-## %p - performer
-## %d - disc
-## %C - comment
-## %P - priority
-## $R - begin right alignment
-##
-## If you want to make sure that a part of the format is displayed
-## only when certain tags are present, you can archieve it by
-## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
-## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
-## It is also possible to define a list of alternatives by providing
-## several groups and separating them with '|', e.g. '{%t}|{%f}'
-## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
-## present.
-##
-## Note: If you want to set limit on maximal length of a tag, just
-## put the appropriate number between % and character that defines
-## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
-##
-## In addition, formats support markers used for text attributes.
-## They are followed by character '$'. After that you can put:
-##
-## - 0 - default window color (discards all other colors)
-## - 1 - black
-## - 2 - red
-## - 3 - green
-## - 4 - yellow
-## - 5 - blue
-## - 6 - magenta
-## - 7 - cyan
-## - 8 - white
-## - 9 - end of current color
-## - b - bold text
-## - u - underline text
-## - r - reverse colors
-## - a - use alternative character set
-##
-## If you don't want to use a non-color attribute anymore, just put it
-## again, but this time insert character '/' between '$' and attribute
-## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
-## or filename with reversed colors.
-##
-## If you want to use 256 colors and/or background colors in formats
-## (the naming scheme is described below in section about color
-## definitions), it can be done with the syntax $(COLOR), e.g. to set
-## the artist tag to one of the non-standard colors and make it have
-## yellow background, you need to write $(197_yellow)%a$(end). Note
-## that for standard colors this is interchangable with attributes
-## listed above.
-##
-## Note: colors can be nested.
-##
-#
-#song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
-#
-#song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
-#
-#song_library_format = {%n - }{%t}|{%f}
-#
-#
-#alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
-#
-#alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
-#
-#now_playing_prefix = $b
-#
-#now_playing_suffix = $/b
-#
-#browser_playlist_prefix = "$2playlist$9 "
-#
-#selected_item_prefix = $6
-#
-#selected_item_suffix = $9
-#
-#modified_item_prefix = $3> $9
-#
-##
-## Note: attributes are not supported for the following variables.
-##
-#song_window_title_format = {%a - }{%t}|{%f}
-##
-## Note: Below variables are used for sorting songs in browser.
-## The sort mode determines how songs are sorted, and can be used
-## in combination with a sort format to specify a custom sorting format.
-## Available values for browser_sort_mode are "name", "mtime", "format"
-## and "noop".
-##
-#
-#browser_sort_mode = name
-#
-#browser_sort_format = {%a - }{%t}|{%f} {(%l)}
-#
-##### columns settings #####
-##
-## syntax of song columns list format is "column column etc."
-##
-## - syntax for each column is:
-##
-## (width of the column)[color of the column]{displayed tag}
-##
-## Note: Width is by default in %, if you want a column to
-## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
-## will be the column that take 10% of screen (so the real width
-## will depend on actual screen size), whereas (10f)[white]{a}
-## will take 10 terminal cells, no matter how wide the screen is.
-##
-## - color is optional (if you want the default one,
-## leave the field empty).
-##
-## Note: You can give a column additional attributes by putting appropriate
-## character after displayed tag character. Available attributes are:
-##
-## - r - column will be right aligned
-## - E - if tag is empty, empty tag marker won't be displayed
-##
-## You can also:
-##
-## - give a column custom name by putting it after attributes,
-## separated with character ':', e.g. {lr:Length} gives you
-## right aligned column of lengths named "Length".
-##
-## - define sequence of tags, that have to be displayed in case
-## predecessor is empty in a way similar to the one in classic
-## song format, i.e. using '|' character, e.g. {a|c|p:Owner}
-## creates column named "Owner" that tries to display artist
-## tag and then composer and performer if previous ones are
-## not available.
-##
-#
-#song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
-#
-##### various settings #####
-#
-##
-## Note: Custom command that will be executed each
-## time song changes. Useful for notifications etc.
-##
-#execute_on_song_change = ""
-#
-#playlist_show_mpd_host = no
-#
-#playlist_show_remaining_time = no
-#
-#playlist_shorten_total_times = no
-#
-#playlist_separate_albums = no
-#
-##
-## Note: Possible display modes: classic, columns.
-##
-#playlist_display_mode = columns
-#
-#browser_display_mode = classic
-#
-#search_engine_display_mode = classic
-#
-#playlist_editor_display_mode = classic
-#
-#discard_colors_if_item_is_selected = yes
-#
-#incremental_seeking = yes
-#
-#seek_time = 1
-#
-#volume_change_step = 2
-#
-#autocenter_mode = no
-#
-#centered_cursor = no
-#
-##
-## Note: You can specify third character which will
-## be used to build 'empty' part of progressbar.
-##
-#progressbar_look = =>
-progressbar_look = "─╼╶"
-#progressbar_look = "─⊙╶"
-#
-#progressbar_boldness = yes
-#
-## Available values: database, playlist.
-##
-#default_place_to_search_in = database
-#
-## Available values: classic, alternative.
-##
-#user_interface = classic
-#
-#data_fetching_delay = yes
-#
-## Available values: artist, album_artist, date, genre, composer, performer.
-##
-#media_library_primary_tag = artist
-#
-## Available values: wrapped, normal.
-##
-#default_find_mode = wrapped
-#
-#default_tag_editor_pattern = %n - %t
-#
-#header_visibility = yes
-#
-#statusbar_visibility = yes
-#
-#titles_visibility = yes
-#
-#header_text_scrolling = yes
-#
-#cyclic_scrolling = no
-#
-#lines_scrolled = 2
-#
-#follow_now_playing_lyrics = no
-#
-#fetch_lyrics_for_current_song_in_background = no
-#
-#store_lyrics_in_song_dir = no
-#
-#generate_win32_compatible_filenames = yes
-#
-#allow_for_physical_item_deletion = no
-#
-##
-## Note: If you set this variable, ncmpcpp will try to
-## get info from last.fm in language you set and if it
-## fails, it will fall back to english. Otherwise it will
-## use english the first time.
-##
-## Note: Language has to be expressed as an ISO 639 alpha-2 code.
-##
-#lastfm_preferred_language = en
-#
-#show_hidden_files_in_local_browser = no
-#
-##
-## How shall screen switcher work?
-##
-## - "previous" - switch between the current and previous screen.
-## - "screen1,...,screenN" - switch between given sequence of screens.
-##
-## Screens available for use: help, playlist, browser, search_engine,
-## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
-##
-#screen_switcher_mode = playlist, browser
-#
-##
-## Note: You can define startup screen
-## by choosing screen from the list above.
-##
-#startup_screen = playlist
-#
-##
-## Note: You can define startup slave screen
-## by choosing screen from the list above or
-## an empty value for no slave screen.
-##
-#startup_slave_screen = ""
-#
-#startup_slave_screen_focus = no
-#
-##
-## Default width of locked screen (in %).
-## Acceptable values are from 20 to 80.
-##
-#
-#locked_screen_width_part = 50
-#
-#ask_for_locked_screen_width_part = yes
-#
-#jump_to_now_playing_song_at_start = yes
-#
-#ask_before_clearing_playlists = yes
-#
-#clock_display_seconds = no
-#
-#display_volume_level = yes
-#
-#display_bitrate = no
-#
-#display_remaining_time = no
-#
-## Available values: none, basic, extended, perl.
-##
-#regular_expressions = perl
-#
-##
-## Note: If below is enabled, ncmpcpp will ignore leading
-## "The" word while sorting items in browser, tags in
-## media library, etc.
-##
-#ignore_leading_the = no
-#
-#block_search_constraints_change_if_items_found = yes
-#
-#mouse_support = yes
-#
-#mouse_list_scroll_whole_page = yes
-#
-#empty_tag_marker = <empty>
-#
-#tags_separator = " | "
-#
-#tag_editor_extended_numeration = no
-#
-#media_library_sort_by_mtime = no
-#
-#enable_window_title = yes
-#
-##
-## Note: You can choose default search mode for search
-## engine. Available modes are:
-##
-## - 1 - use mpd built-in searching (no regexes, pattern matching)
-## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
-## but if your mpd is on a remote machine, downloading big database
-## to process it can take a while
-## - 3 - match only exact values (this mode uses mpd function for searching
-## in database and local one for searching in current playlist)
-##
-#
-#search_engine_default_search_mode = 1
-#
-#external_editor = nano
-#
-## Note: set to yes if external editor is a console application.
-##
-#use_console_editor = yes
-#
-##### colors definitions #####
-##
-## It is possible to set a background color by setting a color
-## value "<foreground>_<background>", e.g. red_black will set
-## foregound color to red and background color to black.
-##
-## In addition, for terminals that support 256 colors it
-## is possible to set one of them by using a number in range
-## [1, 256] instead of color name, e.g. numerical value
-## corresponding to red_black is 2_1. To find out if the
-## terminal supports 256 colors, run ncmpcpp and check out
-## the bottom of the help screen for list of available colors
-## and their numerical values.
-##
-## Note: due to technical limitations of ncurses, if 256 colors
-## are used, it is possible to either use only the colors with
-## default background color, or all pairs from 1_1 up to 254_127,
-## depending on the ncurses version used.
-##
-#
-#colors_enabled = yes
-#
-#empty_tag_color = cyan
-#
-#header_window_color = default
-#
-#volume_color = default
-#
-#state_line_color = default
-#
-#state_flags_color = default
-#
-#main_window_color = yellow
-#
-#color1 = white
-#
-#color2 = green
-#
-#main_window_highlight_color = yellow
-#
-#progressbar_color = black
-#
-#progressbar_elapsed_color = green
-#
-#statusbar_color = default
-#
-#alternative_ui_separator_color = black
-#
-#active_column_color = red
-#
-#window_border_color = green
-#
-#active_window_border = red
-#
-#+end_src
-
-*** bindings
-:PROPERTIES:
-:header-args+: :tangle ~/.ncmpcpp/bindings
-:END:
-
-#+begin_src conf :tangle no
-def_key "j"
- scroll_down
-def_key "k"
- scroll_up
-
-def_key "ctrl-u"
- page_up
-def_key "ctrl-d"
- page_down
-
-def_key "h"
- previous_column
-def_key "l"
- next_column
-
-def_key "."
- show_lyrics
-
-def_key "n"
- next_found_item
-def_key "N"
- previous_found_item
-
-def_key "J"
- move_sort_order_down
-def_key "K"
- move_sort_order_up
-#+end_src
-
-** notmuch
-
-*** notmuch-config
-:PROPERTIES:
-:header-args+: :tangle ~/.notmuch-config
-:END:
-
-#+begin_src conf
-# .notmuch-config - Configuration file for the notmuch mail system
-#
-# For more information about notmuch, see https://notmuchmail.org
-
-# Database configuration
-#
-# The only value supported here is 'path' which should be the top-level
-# directory where your mail currently exists and to where mail will be
-# delivered in the future. Files should be individual email messages.
-# Notmuch will store its database within a sub-directory of the path
-# configured here named ".notmuch".
-#
-[database]
-path=/home/amin/oldmail
-
-# User configuration
-#
-# Here is where you can let notmuch know how you would like to be
-# addressed. Valid settings are
-#
-# name Your full name.
-# primary_email Your primary email address.
-# other_email A list (separated by ';') of other email addresses
-# at which you receive email.
-#
-# Notmuch will use the various email addresses configured here when
-# formatting replies. It will avoid including your own addresses in the
-# recipient list of replies, and will set the From address based on the
-# address to which the original email was addressed.
-#
-[user]
-name=Amin Bandali
-primary_email=amin@aminb.org
-other_email=bandali@gnu.org;abandali@uwaterloo.ca;
-
-# Configuration for "notmuch new"
-#
-# The following options are supported here:
-#
-# tags A list (separated by ';') of the tags that will be
-# added to all messages incorporated by "notmuch new".
-#
-# ignore A list (separated by ';') of file and directory names
-# that will not be searched for messages by "notmuch new".
-#
-# NOTE: *Every* file/directory that goes by one of those
-# names will be ignored, independent of its depth/location
-# in the mail store.
-#
-[new]
-tags=new;
-#tags=unread;inbox;
-ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
-
-# Search configuration
-#
-# The following option is supported here:
-#
-# exclude_tags
-# A ;-separated list of tags that will be excluded from
-# search results by default. Using an excluded tag in a
-# query will override that exclusion.
-#
-[search]
-exclude_tags=deleted;spam;
-
-# Maildir compatibility configuration
-#
-# The following option is supported here:
-#
-# synchronize_flags Valid values are true and false.
-#
-# If true, then the following maildir flags (in message filenames)
-# will be synchronized with the corresponding notmuch tags:
-#
-# Flag Tag
-# ---- -------
-# D draft
-# F flagged
-# P passed
-# R replied
-# S unread (added when 'S' flag is not present)
-#
-# The "notmuch new" command will notice flag changes in filenames
-# and update tags, while the "notmuch tag" and "notmuch restore"
-# commands will notice tag changes and update flags in filenames
-#
-[maildir]
-synchronize_flags=true
-
-# Cryptography related configuration
-#
-# The following option is supported here:
-#
-# gpg_path
-# binary name or full path to invoke gpg.
-#
-[crypto]
-gpg_path=gpg
-#+end_src
-
-*** pre-new hook
-:PROPERTIES:
-:header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
-:END:
-
-#+begin_src sh
-touch /tmp/gnusieve.log
-sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
- -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
-#+end_src
-
-*** post-new hook
-:PROPERTIES:
-:header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
-:END:
-
-#+begin_src sh
-# apply sent tag to messages sent by me
-notmuch tag -new +sent -- from:amin@aminb.org or from:bandali@gnu.org or from:aminb@gnu.org or from:amin@gnu.org or from:mab@gnu.org or from:abandali@uwaterloo.ca
-
-# initial tagging
-notmuch tag -latest -- tag:latest
-notmuch tag +inbox +unread +latest -new -- tag:new
-
-
-# apply tags to lists
-
-# <aminb>
-notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
-notmuch tag -inbox +lists/haskell-weekly -- folder:amin/lists/haskell-weekly
-
-notmuch tag -inbox +pay -- folder:amin/pay
-notmuch tag -inbox +banking -- folder:amin/banking
-notmuch tag -inbox +work -- folder:amin/work
-# </aminb>
-
-# <uw>
-notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
-notmuch tag -inbox +uw/cs846 -- folder:uwaterloo/lists/cs846
-notmuch tag -inbox +uw/ece750 -- folder:uwaterloo/lists/ece750
-notmuch tag -inbox +uw/se212 -- folder:uwaterloo/lists/se212
-notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
-
-notmuch tag -inbox +lists/alloytools -- folder:uwaterloo/lists/alloytools
-notmuch tag -inbox +lists/clvsingle -- folder:uwaterloo/lists/Clvsingle
-notmuch tag -inbox +lists/gsa -- folder:uwaterloo/lists/GSA
-notmuch tag -inbox +lists/math-grad -- folder:uwaterloo/lists/Math-grad
-notmuch tag -inbox +lists/scs-grads -- folder:uwaterloo/lists/scs-grads
-notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
-# </uw>
-
-# <gnu>
-notmuch tag -inbox +l/emacs-devel -- folder:gnu/l/emacs-devel
-notmuch tag -inbox +l/emacs-orgmode -- folder:gnu/l/emacs-orgmode
-notmuch tag -inbox +l/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
-notmuch tag -inbox +l/fencepost-users -- folder:gnu/l/fencepost-users
-notmuch tag -inbox +l/guix-devel -- folder:gnu/l/guix-devel
-notmuch tag -inbox +l/guile-devel -- folder:gnu/l/guile-devel
-notmuch tag -inbox +l/help-gnu-emacs -- folder:gnu/l/help-gnu-emacs
-notmuch tag -inbox +l/info-gnu-emacs -- folder:gnu/l/info-gnu-emacs
-notmuch tag -inbox +l/www-commits -- folder:gnu/l/www-commits
-notmuch tag -inbox +l/www-discuss -- folder:gnu/l/www-discuss
-notmuch tag -inbox +webmasters -- folder:gnu/webmasters
-
-notmuch tag -inbox +l/deepspec -- folder:gnu/l/deepspec
-notmuch tag -inbox +l/haskell-cafe -- folder:gnu/l/haskell-cafe
-notmuch tag -inbox +l/haskell-art -- folder:gnu/l/haskell-art
-notmuch tag -inbox +l/notmuch -- folder:gnu/l/notmuch
-
-notmuch tag -inbox +l/~aminb/test-priv -- folder:gnu/l/~aminb/test-priv
-notmuch tag -inbox +l/~sircmpwn/sr.ht-admins -- folder:gnu/l/~sircmpwn/sr.ht-admins
-notmuch tag -inbox +l/~sircmpwn/sr.ht-announce -- folder:gnu/l/~sircmpwn/sr.ht-announce
-notmuch tag -inbox +l/~sircmpwn/sr.ht-dev -- folder:gnu/l/~sircmpwn/sr.ht-dev
-notmuch tag -inbox +l/~sircmpwn/sr.ht-discuss -- folder:gnu/l/~sircmpwn/sr.ht-discuss
-# </gnu>
-
-notmuch tag -inbox -unread +archive/notmuch -- path:archive/notmuch/**
-notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**
-#+end_src
-
-*** notmuch.service
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/notmuch.service
-:END:
-
-#+begin_src conf :tangle no
-[Unit]
-Description=notmuch service
-
-[Service]
-Type=oneshot
-ExecStart=/usr/bin/notmuch new
-StandardOutput=syslog
-StandardError=syslog
-#+end_src
-
-*** notmuch.timer
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/notmuch.timer
-:END:
-
-#+begin_src conf :tangle no
-[Unit]
-Description=notmuch timer
-
-[Timer]
-OnCalendar=*:0/5
-Persistent=true
-Unit=notmuch.service
-
-[Install]
-WantedBy=timers.target
-#+end_src
-
-** pacman
-
-*** conf
-
-#+begin_src conf :tangle /sudo::/etc/pacman.conf :comments none
-#
-# /etc/pacman.conf
-#
-# See the pacman.conf(5) manpage for option and repository directives
-
-#
-# GENERAL OPTIONS
-#
-[options]
-# The following paths are commented out with their default values listed.
-# If you wish to use different paths, uncomment and update the paths.
-#RootDir = /
-#DBPath = /var/lib/pacman/
-#CacheDir = /var/cache/pacman/pkg/
-#LogFile = /var/log/pacman.log
-#GPGDir = /etc/pacman.d/gnupg/
-#HookDir = /etc/pacman.d/hooks/
-HoldPkg = pacman glibc
-#XferCommand = /usr/bin/curl -L -C - -f -o %o %u
-#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
-#CleanMethod = KeepInstalled
-#UseDelta = 0.7
-Architecture = auto
-
-# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
-#IgnorePkg =
-#IgnoreGroup =
-
-#NoUpgrade =
-#NoExtract =
-
-# Misc options
-#UseSyslog
-Color
-TotalDownload
-CheckSpace
-VerbosePkgLists
-
-# By default, pacman accepts packages signed by keys that its local keyring
-# trusts (see pacman-key and its man page), as well as unsigned packages.
-SigLevel = Required DatabaseOptional
-LocalFileSigLevel = Optional
-#RemoteFileSigLevel = Required
-
-# NOTE: You must run `pacman-key --init` before first using pacman; the local
-# keyring can then be populated with the keys of all Arch/Parabola packagers
-# with `pacman-key --populate archlinux` and `pacman-key --populate parabola`.
-
-#
-# REPOSITORIES
-# - can be defined here or included from another file
-# - pacman will search repositories in the order defined here
-# - local/custom mirrors can be added here or in separate files
-# - repositories listed first will take precedence when packages
-# have identical names, regardless of version number
-# - URLs will have $repo replaced by the name of the current repo
-# - URLs will have $arch replaced by the name of the architecture
-#
-# Repository entries are of the format:
-# [repo-name]
-# Server = ServerName
-# Include = IncludePath
-#
-# The header [repo-name] is crucial - it must be present and
-# uncommented to enable the repo.
-#
-
-# The testing repositories are disabled by default. To enable, uncomment the
-# repo name header and Include lines. You can add preferred servers immediately
-# after the header, and they will be used before the default mirrors.
-
-# NOTE: Nonprism is a particular repository that aims to provide software built
-# and patched without services under global data surveillance programs like PRISM,
-# XKeyscore and Tempora. For more info see: https://wiki.parabola.nu/Nonprism
-
-#[nonprism-testing]
-#Include = /etc/pacman.d/mirrorlist
-
-#[nonprism]
-#Include = /etc/pacman.d/mirrorlist
-
-[libre-testing]
-Include = /etc/pacman.d/mirrorlist
-
-[libre]
-Include = /etc/pacman.d/mirrorlist
-
-#[testing]
-#Include = /etc/pacman.d/mirrorlist
-
-[core]
-Include = /etc/pacman.d/mirrorlist
-
-[extra]
-Include = /etc/pacman.d/mirrorlist
-
-#[community-testing]
-#Include = /etc/pacman.d/mirrorlist
-
-[community]
-Include = /etc/pacman.d/mirrorlist
-
-# The PCR (Parabola Community Repository) contains packages maintained by trusted
-# members of the Parabola community. It also contains packages maintained by
-# Parabola developers, but that the developer decided didn't belong in core/libre.
-
-#[pcr-testing]
-#Include = /etc/pacman.d/mirrorlist
-
-[pcr]
-Include = /etc/pacman.d/mirrorlist
-
-# If you want to run 32 bit applications on your x86_64 system,
-# enable the libre-multilib, multilib and pcr-multilib repositories as required here.
-
-#[nonprism-multilib-testing]
-#Include = /etc/pacman.d/mirrorlist
-
-#[nonprism-multilib]
-#Include = /etc/pacman.d/mirrorlist
-
-#[libre-multilib-testing]
-#Include = /etc/pacman.d/mirrorlist
-
-#[libre-multilib]
-#Include = /etc/pacman.d/mirrorlist
-
-#[multilib-testing]
-#Include = /etc/pacman.d/mirrorlist
-
-#[multilib]
-#Include = /etc/pacman.d/mirrorlist
-
-#[pcr-multilib-testing]
-#Include = /etc/pacman.d/mirrorlist
-
-#[pcr-multilib]
-#Include = /etc/pacman.d/mirrorlist
-
-# Parabola also supports another community projects and personal repositories, to
-# find them check out this wiki page: https://wiki.parabola.nu/Repositories
-
-# An example of a custom package repository. See the pacman manpage for
-# tips on creating your own repositories.
-#[custom]
-#SigLevel = Optional TrustAll
-#Server = file:///home/custompkgs
-
-Include = /etc/pacman.d/*.conf
-#+end_src
-
-*** mirrorlist
-
-#+begin_src conf :tangle /sudo::/etc/pacman.d/mirrorlist :comments none
-# Parabola GNU/Linux-libre - Last Updated: Wed Dec 20 02:59:35 GMT 2017
-
-Server = http://mirror.fsf.org/parabola/$repo/os/$arch
-Server = http://mirror.fsf.org/parabola/$repo/os/$arch
-Server = http://mirror.fsf.org/parabola/$repo/os/$arch
-Server = http://mirror.fsf.org/parabola/$repo/os/$arch
-
-# Location: London, UK
-# Responsible: Parabola Project
-# Note: Not really a mirror, automatically redirects you to an Arch
-# mirror when possible. Works best specifying it a few times in a
-# row (404s workaround).
-# Server = http://redirector.parabola.nu/$repo/os/$arch
-Server = https://redirector.parabola.nu/$repo/os/$arch
-
-# Location: Reykjavík, Iceland
-# Responsible: Parabola Project
-# Note: Not really a mirror, automatically redirects you to a Parabola
-# mirror that has the file you are looking for.
-# Server = http://repomirror.parabola.nu/$repo/os/$arch
-Server = https://repomirror.parabola.nu/$repo/os/$arch
-
-# Location: Falkenstein, Germany
-# Server = http://mirror.grapentin.org/parabola/$repo/os/$arch
-Server = https://mirror.grapentin.org/parabola/$repo/os/$arch
-
-# Location: Volendam, Netherlands
-Server = https://jeweet.net/repo/parabola/$repo/os/$arch
-
-# Location: Amsterdam, Netherlands
-# Note: Not really a mirror, but a high-speed 10GiB cache for
-# mirror.yandex.ru/mirrors/parabola
-# Server = http://parabola.isacdaavid.info:8080/$repo/os/$arch
-Server = https://parabola.isacdaavid.info:8081/$repo/os/$arch
-
-# Location: Moscow, Russian Federation
-# Server = http://mirror.yandex.ru/mirrors/parabola/$repo/os/$arch
-Server = https://mirror.yandex.ru/mirrors/parabola/$repo/os/$arch
-
-# Location: Ho Chi Minh City, Vietnam
-# Server = http://mirror.freedif.org/Parabola/$repo/os/$arch
-Server = https://mirror.freedif.org/Parabola/$repo/os/$arch
-
-# Location: Los Angeles, CA, USA
-# Note: Also visit http://alfplayer.com/ for its SNAPSHOTS ARCHIVE
-Server = http://alfplayer.com/parabola/$repo/os/$arch
-
-# Location: Boston, MA, USA
-Server = http://mirror.fsf.org/parabola/$repo/os/$arch
-
-# Location: Austin, TX, USA
-# Server = http://parabola.serverpit.com/
-Server = https://parabola.serverpit.com/
-
-# Location: Reykjavík, Iceland
-# Responsible: Parabola Project
-# Note: Currently pointing to repomirror.parabola.nu
-# Server = http://repo.parabola.nu/$repo/os/$arch
-Server = https://repo.parabola.nu/$repo/os/$arch
-#+end_src
-
-** pigeonhole
-*** amin.sieve
-:PROPERTIES:
-:header-args+: :tangle ~/mail/bndl.org/amin/sieve/amin.sieve :comments none
-:END:
-
-#+begin_src conf
-require ["regex", "variables", "fileinto", "envelope",
- "mailbox", "imap4flags", "include"];
-
-# webmasters
-if anyof (
- address :is "from" ["webmasters@gnu.org", "webmasters-comment@gnu.org"]) {
- fileinto :create "gnu.webmasters";
- stop;
-}
-
-include :personal "lists";
-#+end_src
-
-*** lists.sieve
-:PROPERTIES:
-:header-args+: :tangle ~/mail/bndl.org/amin/sieve/lists.sieve :comments none
-:END:
-
-#+begin_src conf
-require ["regex", "variables", "fileinto", "envelope",
- "mailbox", "imap4flags", "include"];
-
-# mailing lists
-if anyof (
- header :contains "list-id"
- [ "<emacs-devel.gnu.org>"
- , "<emacs-orgmode.gnu.org>"
- , "<emacsconf-discuss.gnu.org>"
- , "<fencepost-users.gnu.org>"
- , "<guix-devel.gnu.org>"
- , "<guile-devel.gnu.org>"
- , "<help-gnu-emacs.gnu.org>"
- , "<info-gnu-emacs.gnu.org>"
- , "<info-guix.gnu.org>"
- , "<www-commits.gnu.org>"
- , "<www-discuss.gnu.org>"
- , "<deepspec.lists.cs.princeton.edu>"
- , "<haskell-cafe.haskell.org>"
- , "<haskell-art.we.lurk.org>"
- , "<notmuch.notmuchmail.org>"
- ] ) {
- if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
- set :lower "listname" "${1}";
- fileinto :create "gnu.${listname}";
- stop;
- }
-}
-
-# sr.ht lists, with dots ('.') omitted
-if anyof (
- header :contains "list-id"
- [ "<~bandali/public-inbox@lists.sr.ht>"
- , "<~sircmpwn/sr.ht-admins@lists.sr.ht>"
- , "<~sircmpwn/sr.ht-announce@lists.sr.ht>"
- , "<~sircmpwn/sr.ht-dev@lists.sr.ht>"
- , "<~sircmpwn/sr.ht-discuss@lists.sr.ht>"
- ] ) {
- if header :regex "list-id" "(~[a-z_0-9-]+)/([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)@" {
- set :lower "username" "${1}";
- set :lower "listname" "${2}${3}${4}${5}${6}${7}";
- fileinto :create "gnu.${username}.${listname}";
- stop;
- }
-}
-#+end_src
-
-** PowerTOP
-:PROPERTIES:
-:header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
-:END:
-
-#+begin_src conf
-[Unit]
-Description=Powertop tunings
-
-[Service]
-ExecStart=/usr/bin/powertop --auto-tune
-RemainAfterExit=true
-
-[Install]
-WantedBy=multi-user.target
-#+end_src
-
-** redshift
-:PROPERTIES:
-:header-args+: :tangle ~/.config/redshift.conf :comments none
-:END:
-
-#+begin_src conf
-; Global settings for redshift
-[redshift]
-; Set the day and night screen temperatures (Neutral is 6500K)
-;temp-day=5700
-;temp-night=3500
-
-;temp-day=6500
-temp-day=6200
-;temp-night=4800
-;temp-night=5000
-;temp-night=4500
-temp-night=4000
-
-; Enable/Disable a smooth transition between day and night
-; 0 will cause a direct change from day to night screen temperature.
-; 1 will gradually increase or decrease the screen temperature.
-transition=1
-
-; Set the screen brightness. Default is 1.0.
-;brightness=0.9
-; It is also possible to use different settings for day and night
-; since version 1.8.
-;brightness-day=0.7
-;brightness-night=0.4
-; Set the screen gamma (for all colors, or each color channel
-; individually)
-;gamma=0.8
-;gamma=1.0
-;gamma=0.8:0.7:0.8
-; This can also be set individually for day and night since
-; version 1.10.
-;gamma-day=0.8:0.7:0.8
-;gamma-night=0.6
-
-; Set the location-provider: 'geoclue2' or 'manual'
-; type 'redshift -l list' to see possible values.
-; The location provider settings are in a different section.
-;location-provider=manual
-location-provider=geoclue2
-
-; Set the adjustment-method: 'randr', 'vidmode'
-; type 'redshift -m list' to see all possible values.
-; 'randr' is the preferred method, 'vidmode' is an older API.
-; but works in some cases when 'randr' does not.
-; The adjustment method settings are in a different section.
-adjustment-method=randr
-
-; Configuration of the location-provider:
-; type 'redshift -l PROVIDER:help' to see the settings.
-; ex: 'redshift -l manual:help'
-; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
-; are negative numbers.
-;[manual]
-;lat=48.1
-;lon=11.6
-
-; Configuration of the adjustment-method
-; type 'redshift -m METHOD:help' to see the settings.
-; ex: 'redshift -m randr:help'
-; In this example, randr is configured to adjust screen 1.
-; Note that the numbering starts from 0, so this is actually the
-; second screen. If this option is not specified, Redshift will try
-; to adjust _all_ screens.
-;[randr]
-;screen=1
-#+end_src
-
-** rofi
-:PROPERTIES:
-:header-args+: :tangle ~/.config/rofi/config
-:END:
-
-#+begin_src conf
-! rofi.font: Ubuntu Mono 13
-! rofi.font: Inconsolata 16
-! rofi.font: Iosevka 13
-! rofi.font: Source Code Pro 11
-rofi.font: Source Code Pro 10.5
-rofi.modi: run,window
-! rofi.width: 640
-rofi.width: 600
-!rofi.location: 2
-!rofi.yoffset: 200
-rofi.monitor: -1
-!rofi.lines: 10
-
-!rofi.theme: /usr/share/rofi/themes//Arc.rasi
-!rofi.theme: /usr/share/rofi/themes//Paper.rasi
-!rofi.theme: /usr/share/rofi/themes//sidebar.rasi
-
-rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
-#+end_src
-
-** rofi-pass
-:PROPERTIES:
-:header-args+: :tangle ~/.config/rofi-pass/config
-:END:
-
-#+begin_src conf
-# permanently set alternative root dir
-# root=/path/to/root
-
-# rofi command. Make sure to have "$@" as last argument
-_rofi () {
- #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
- rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
-}
-
-# xdotool needs the keyboard layout to be set using setxkbmap
-# You can do this in your autostart scripts (e.g. xinitrc)
-
-# If for some reason, you cannot do this, you can set the command here.
-# and set fix_layout to true
-fix_layout=false
-
-layout_cmd () {
- setxkbmap us
-}
-
-# fields to be used
-URL_field='url'
-USERNAME_field='user'
-AUTOTYPE_field='autotype'
-
-# delay to be used for :delay keyword
-delay=2
-
-## Programs to be used
-# Editor
-EDITOR='gvim -f'
-
-# Browser
-BROWSER='chromium'
-
-## Misc settings
-
-default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
-auto_enter='false'
-notify='false'
-default_autotype='user :tab pass'
-
-# color of the help messages
-# leave empty for autodetection
-help_color="#4872FF"
-
-# Clipboard settings
-# Possible options: primary, clipboard, both
-clip=primary
-
-# Options for generating new password entries
-# default_user is also used for password files that have no user field.
-default_user=aminb
-default_user2=bandali
-password_length=30
-
-# Custom Keybindings
-#autotype="Alt+1"
-autotype="Alt+m"
-type_user="Alt+2"
-type_pass="Alt+3"
-open_url="Alt+4"
-copy_name="Alt+u"
-copy_url="Alt+l"
-copy_pass="Alt+p"
-show="Alt+o"
-copy_entry="Alt+2"
-type_entry="Alt+1"
-copy_menu="Alt+c"
-action_menu="Alt+a"
-type_menu="Alt+t"
-help="Alt+h"
-switch="Alt+x"
-insert_pass="Alt+n"
-#+end_src
-
-** sway
-
-*** main
-:PROPERTIES:
-:header-args+: :tangle ~/.config/sway/config
-:END:
-
-#+begin_src conf
-### Variables
-# super
-set $mod Mod4
-# alt
-set $mod2 Mod1
-set $left h
-set $down j
-set $up k
-set $right l
-set $term urxvt
-set $menu rofi -show run -display-run '> ' -display-window ' 🗔 '
-
-### Output configuration
-#
-# Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/)
-output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
-#
-# Example configuration:
-#
-# output HDMI-A-1 resolution 1920x1080 position 1920,0
-#
-# You can get the names of your outputs by running: swaymsg -t get_outputs
-
-### Idle configuration
-
-exec swayidle \
- timeout 120 '[ -f ~/.nosleep ] || swaymsg "output * dpms off"' \
- resume '[ -f ~/.nosleep ] || swaymsg "output * dpms on"' \
-
-
-### Key bindings
-#
-# Basics:
-#
- # start a terminal
- bindsym $mod+Return exec $term -name floating
- bindsym $mod+Shift+Return exec $term
- for_window [class="URxvt" instance="floating"] floating enable
-
- # kill focused window
- bindsym $mod+Shift+q kill
-
- # start your launcher
- bindsym $mod+d exec $menu
-
- # password manager
- bindsym $mod2+space exec rofi-pass
-
- # Drag floating windows by holding down $mod and left mouse button.
- # Resize them with right mouse button + $mod.
- # Despite the name, also works for non-floating windows.
- # Change normal to inverse to use left mouse button for resizing and right
- # mouse button for dragging.
- floating_modifier $mod normal
-
- # reload the configuration file
- bindsym $mod+Shift+c reload
-
- # exit sway (logs you out of your wayland session)
- # bindsym $mod+Shift+e exit
-
- bindsym $mod+apostrophe exec rofi-light # rofi-based brightness chooser
- bindsym XF86MonBrightnessUp exec light -A 5 # increase screen brightness
- bindsym XF86MonBrightnessDown exec light -U 5 # decrease screen brightness
-
- bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
- bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
- bindsym XF86AudioMute exec pamixer --toggle-mute
- bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
-
- bindsym $mod+Shift+apostrophe exec rofi-remmina.py # choose remmina connection
-
- # original sway workspace switch and window move
- bindsym $mod+bracketleft workspace prev
- bindsym $mod+bracketright workspace next
- bindsym $mod+braceleft move container to workspace prev
- bindsym $mod+braceright move container to workspace next
-
- # bspwm-esque workspace switch and window move
- bindsym $mod2+bracketleft exec sway-ws-util switch prev
- bindsym $mod2+bracketright exec sway-ws-util switch next
- bindsym $mod2+braceleft exec sway-ws-util move prev follow
- bindsym $mod2+braceright exec sway-ws-util move next follow
-#
-# Moving around:
-#
- # Move your focus around
- bindsym $mod+$left focus left
- bindsym $mod+$down focus down
- bindsym $mod+$up focus up
- bindsym $mod+$right focus right
- # or use $mod+[up|down|left|right]
- bindsym $mod+Left focus left
- bindsym $mod+Down focus down
- bindsym $mod+Up focus up
- bindsym $mod+Right focus right
-
- # _move_ the focused window with the same, but add Shift
- bindsym $mod+Shift+$left move left
- bindsym $mod+Shift+$down move down
- bindsym $mod+Shift+$up move up
- bindsym $mod+Shift+$right move right
- # ditto, with arrow keys
- bindsym $mod+Shift+Left move left
- bindsym $mod+Shift+Down move down
- bindsym $mod+Shift+Up move up
- bindsym $mod+Shift+Right move right
-#
-# Workspaces:
-#
- # switch to workspace
- bindsym $mod+1 workspace 1
- bindsym $mod+2 workspace 2
- bindsym $mod+3 workspace 3
- bindsym $mod+4 workspace 4
- bindsym $mod+5 workspace 5
- bindsym $mod+6 workspace 6
- bindsym $mod+7 workspace 7
- bindsym $mod+8 workspace 8
- bindsym $mod+9 workspace 9
- bindsym $mod+0 workspace 10
- # move focused container to workspace
- bindsym $mod+Shift+1 move container to workspace 1
- bindsym $mod+Shift+2 move container to workspace 2
- bindsym $mod+Shift+3 move container to workspace 3
- bindsym $mod+Shift+4 move container to workspace 4
- bindsym $mod+Shift+5 move container to workspace 5
- bindsym $mod+Shift+6 move container to workspace 6
- bindsym $mod+Shift+7 move container to workspace 7
- bindsym $mod+Shift+8 move container to workspace 8
- bindsym $mod+Shift+9 move container to workspace 9
- bindsym $mod+Shift+0 move container to workspace 10
- # Note: workspaces can have any name you want, not just numbers.
- # We just use 1-10 as the default.
-#
-# Layout stuff:
-#
- # You can "split" the current object of your focus with
- # $mod+b or $mod+v, for horizontal and vertical splits
- # respectively.
- bindsym $mod+b splith
- bindsym $mod+v splitv
-
- # Switch the current container between different layout styles
- bindsym $mod+s layout stacking
- bindsym $mod+w layout tabbed
- bindsym $mod+e layout toggle split
-
- # Make the current focus fullscreen
- bindsym $mod+f fullscreen
-
- # Toggle sticky-ness of the current (floating) window
- bindsym $mod+$mod2+space sticky toggle
-
- # Toggle the current focus between tiling and floating mode
- bindsym $mod+Shift+space floating toggle
-
- # Swap focus between the tiling area and the floating area
- bindsym $mod+space focus mode_toggle
-
- # move focus to the parent container
- bindsym $mod+a focus parent
-#
-# Scratchpad:
-#
- # Sway has a "scratchpad", which is a bag of holding for windows.
- # You can send windows there and get them back later.
-
- # Move the currently focused window to the scratchpad
- bindsym $mod+Shift+minus move scratchpad
-
- # Show the next scratchpad window or hide the focused scratchpad window.
- # If there are multiple scratchpad windows, this command cycles through them.
- bindsym $mod+minus scratchpad show
-#
-# Resizing containers:
-#
-mode "resize" {
- # left will shrink the containers width
- # right will grow the containers width
- # up will shrink the containers height
- # down will grow the containers height
- bindsym $left resize shrink width 10px
- bindsym $down resize grow height 10px
- bindsym $up resize shrink height 10px
- bindsym $right resize grow width 10px
-
- # ditto, with arrow keys
- bindsym Left resize shrink width 10px
- bindsym Down resize grow height 10px
- bindsym Up resize shrink height 10px
- bindsym Right resize grow width 10px
-
- # return to default mode
- bindsym Return mode "default"
- bindsym Escape mode "default"
-}
-bindsym $mod+Shift+r mode "resize"
-
-#
-# Power button
-#
-
-set $mode_system System (l)ock, (e)xit sway, (s)uspend, (h)ibernate, (r)eboot, (S)hutdown
-mode "$mode_system" {
- bindsym l exec swaylock, mode "default"
- bindsym e exec swaymsg exit, mode "default"
- bindsym s exec systemctl suspend, mode "default"
- bindsym h exec systemctl hibernate, mode "default"
- bindsym r exec systemctl reboot, mode "default"
- bindsym Shift+s exec systemctl poweroff -i, mode "default"
-
- # back to normal: Enter, Escape, or q
- bindsym Return mode "default"
- bindsym Escape mode "default"
- bindsym q mode "default"
-}
-# bindsym XF86PowerOff mode "$mode_system"
-bindsym $mod+Shift+e mode "$mode_system"
-
-#
-# Presentation mode
-#
-
-bindsym $mod+$mod2+p exec ([ ! -e ~/.nosleep ] && touch ~/.nosleep || rm ~/.nosleep) && killall -USR1 i3status
-
-#
-# Notifications
-#
-
-bindsym $mod+Shift+n mode notifications
-mode notifications {
- bindsym Return exec makoctl invoke; exec makoctl dismiss; mode default
- bindsym d exec makoctl dismiss; mode default
- bindsym Shift+d exec makoctl dismiss -a; mode default
-
- bindsym Escape mode default
- bindsym q mode default
-}
-
-#
-# Screenshotting
-#
-
-bindsym $mod+Shift+s mode screenshot
-mode screenshot {
- bindsym a exec grim $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
- bindsym r exec slurp | grim -g - $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
-
- bindsym Escape mode default
- bindsym q mode default
-}
-
-#
-# Window configurations
-#
-for_window [class="mpv"] floating enable
-for_window [class="TelegramDesktop"] floating enable
-for_window [app_id="pavucontrol"] floating enable
-for_window [app_id="meld"] floating enable
-for_window [app_id="nm-connection-editor"] floating enable
-
-#
-# Status Bar:
-#
-# Read `man 5 sway-bar` for more information about this section.
-bar {
- position bottom
- colors {
- statusline #ffffff
- background #212121
- inactive_workspace #21212100 #21212100 #5c5c5c
- }
- status_command i3status | my-i3status.py
-}
-
-# font pango: benis uushi 9
-# font pango: Ubuntu Mono 11
-# font pango: Inconsolata 11
-font pango: DejaVu Sans Mono 9
-# font pango: Liberation Mono 9
-
-exec xrdb .Xresources
-# exec pgrep -x "systemd-inhibit" || \
-# systemd-inhibit --what=handle-power-key --who=aminb \
-# --why="Handle power button in sway" sleep infinity
-exec mako 2>&1 >/tmp/mako.log
-exec /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
-
-include /etc/sway/config.d/*
-include ~/.config/sway/`hostname`
-
-exec systemd-notify --ready || true
-
-#+end_src
-
-*** langa
-:PROPERTIES:
-:header-args+: :tangle ~/.config/sway/langa
-:END:
-
-#+begin_src conf
-input "2:7:SynPS/2_Synaptics_TouchPad" {
- events disabled
- dwt enabled
- tap enabled
- natural_scroll enabled
- click_method clickfinger
-}
-
-input "1:1:AT_Translated_Set_2_keyboard" {
- repeat_delay 200
- repeat_rate 45
- xkb_layout us_ab,ir
- xkb_options ctrl:nocaps,altwin:swap_alt_win,grp:shifts_toggle
-}
-#+end_src
-
-*** shemshak
-:PROPERTIES:
-:header-args+: :tangle ~/.config/sway/shemshak
-:END:
-
-#+begin_src conf
-input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
- dwt enabled
- tap enabled
- natural_scroll enabled
- middle_emulation enabled
- click_method clickfinger
-}
-
-input "1:1:AT_Translated_Set_2_keyboard" {
- repeat_delay 200
- repeat_rate 45
- xkb_layout us,ir
- xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
-}
-#+end_src
-** swaylock
-:PROPERTIES:
-:header-args+: :tangle ~/.config/swaylock/config
-:END:
-
-#+begin_src conf
-image=/home/amin/usr/pics/wp/wp2445784-blurred-wallpapers.jpg
-scaling=fill
-#+end_src
-** systemd
-
-Keep boot messages on tty1 (see [[https://wiki.archlinux.org/index.php/getty#Have_boot_messages_stay_on_tty1][here]])
-
-#+begin_src conf :tangle /sudo::/etc/systemd/system/getty@tty1.service.d/noclear.conf
-[Service]
-TTYVTDisallocate=no
-#+end_src
-
-** TLP
-
-*** langa
-
-#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "langa")) "/sudo::/etc/default/tlp")
-# ------------------------------------------------------------------------------
-# tlp - Parameters for power saving
-# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
-
-# Hint: some features are disabled by default, remove the leading # to enable
-# them.
-
-# Set to 0 to disable, 1 to enable TLP.
-TLP_ENABLE=1
-
-# Operation mode when no power supply can be detected: AC, BAT.
-# Concerns some desktop and embedded hardware only.
-TLP_DEFAULT_MODE=AC
-
-# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
-# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
-TLP_PERSISTENT_DEFAULT=0
-
-# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
-# Non-zero value enables, zero disables laptop mode.
-DISK_IDLE_SECS_ON_AC=0
-DISK_IDLE_SECS_ON_BAT=2
-
-# Dirty page values (timeouts in secs).
-MAX_LOST_WORK_SECS_ON_AC=15
-MAX_LOST_WORK_SECS_ON_BAT=60
-
-# Hint: CPU parameters below are disabled by default, remove the leading #
-# to enable them, otherwise kernel default values are used.
-
-# Select a CPU frequency scaling governor.
-# Intel Core i processor with intel_pstate driver:
-# powersave(*), performance.
-# Older hardware with acpi-cpufreq driver:
-# ondemand(*), powersave, performance, conservative, schedutil.
-# (*) is recommended.
-# Hint: use tlp-stat -p to show the active driver and available governors.
-# Important:
-# powersave for intel_pstate and ondemand for acpi-cpufreq are power
-# efficient for *almost all* workloads and therefore kernel and most
-# distributions have chosen them as defaults. If you still want to change,
-# you should know what you're doing! You *must* disable your distribution's
-# governor settings or conflicts will occur.
-#CPU_SCALING_GOVERNOR_ON_AC=powersave
-#CPU_SCALING_GOVERNOR_ON_BAT=powersave
-
-# Set the min/max frequency available for the scaling governor.
-# Possible values strongly depend on your CPU. For available frequencies see
-# the output of tlp-stat -p.
-#CPU_SCALING_MIN_FREQ_ON_AC=0
-#CPU_SCALING_MAX_FREQ_ON_AC=0
-#CPU_SCALING_MIN_FREQ_ON_BAT=0
-#CPU_SCALING_MAX_FREQ_ON_BAT=0
-
-# Set energy performance hints (HWP) for Intel P-state governor:
-# performance, balance_performance, default, balance_power, power
-# Values are given in order of increasing power saving.
-# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
-CPU_HWP_ON_AC=balance_performance
-CPU_HWP_ON_BAT=balance_power
-
-# Set Intel P-state performance: 0..100 (%).
-# Limit the max/min P-state to control the power dissipation of the CPU.
-# Values are stated as a percentage of the available performance.
-# Requires an Intel Core i processor with intel_pstate driver.
-#CPU_MIN_PERF_ON_AC=0
-#CPU_MAX_PERF_ON_AC=100
-#CPU_MIN_PERF_ON_BAT=0
-#CPU_MAX_PERF_ON_BAT=30
-
-# Set the CPU "turbo boost" feature: 0=disable, 1=allow
-# Requires an Intel Core i processor.
-# Important:
-# - This may conflict with your distribution's governor settings
-# - A value of 1 does *not* activate boosting, it just allows it
-#CPU_BOOST_ON_AC=1
-#CPU_BOOST_ON_BAT=0
-
-# Minimize number of used CPU cores/hyper-threads under light load conditions:
-# 0=disable, 1=enable.
-SCHED_POWERSAVE_ON_AC=0
-SCHED_POWERSAVE_ON_BAT=1
-
-# Kernel NMI Watchdog:
-# 0=disable (default, saves power), 1=enable (for kernel debugging only).
-NMI_WATCHDOG=0
-
-# Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
-# Frequency voltage pairs are written to:
-# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
-# CAUTION: only use this, if you thoroughly understand what you are doing!
-#PHC_CONTROLS="F:V F:V F:V F:V"
-
-# Set CPU performance versus energy savings policy:
-# performance, balance-performance, default, balance-power, power.
-# Values are given in order of increasing power saving.
-# Requires kernel module msr and x86_energy_perf_policy from linux-tools.
-ENERGY_PERF_POLICY_ON_AC=performance
-ENERGY_PERF_POLICY_ON_BAT=balance-power
-
-# Disk devices; separate multiple devices with spaces (default: sda).
-# Devices can be specified by disk ID also (lookup with: tlp diskid).
-DISK_DEVICES="sda sdb"
-
-# Disk advanced power management level: 1..254, 255 (max saving, min, off).
-# Levels 1..127 may spin down the disk; 255 allowable on most drives.
-# Separate values for multiple disks with spaces. Use the special value 'keep'
-# to keep the hardware default for the particular disk.
-DISK_APM_LEVEL_ON_AC="254 254"
-DISK_APM_LEVEL_ON_BAT="128 128"
-
-# Hard disk spin down timeout:
-# 0: spin down disabled
-# 1..240: timeouts from 5s to 20min (in units of 5s)
-# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
-# See 'man hdparm' for details.
-# Separate values for multiple disks with spaces. Use the special value 'keep'
-# to keep the hardware default for the particular disk.
-#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
-#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
-
-# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
-# Separate values for multiple disks with spaces. Use the special value 'keep'
-# to keep the kernel default scheduler for the particular disk.
-#DISK_IOSCHED="cfq cfq"
-
-# AHCI link power management (ALPM) for disk devices:
-# min_power, med_power_with_dipm(*), medium_power, max_performance.
-# (*) Kernel >= 4.15 required, then recommended.
-# Multiple values separated with spaces are tried sequentially until success.
-SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
-SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
-
-# Exclude host devices from AHCI link power management.
-# Separate multiple hosts with spaces.
-#SATA_LINKPWR_BLACKLIST="host1"
-
-# Runtime Power Management for AHCI host and disks devices:
-# on=disable, auto=enable.
-# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
-#AHCI_RUNTIME_PM_ON_AC=on
-#AHCI_RUNTIME_PM_ON_BAT=on
-
-# Seconds of inactivity before disk is suspended.
-AHCI_RUNTIME_PM_TIMEOUT=15
-
-# PCI Express Active State Power Management (PCIe ASPM):
-# default, performance, powersave.
-PCIE_ASPM_ON_AC=performance
-PCIE_ASPM_ON_BAT=powersave
-
-# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
-# auto = mid on BAT, high on AC; default = use hardware defaults.
-RADEON_POWER_PROFILE_ON_AC=high
-RADEON_POWER_PROFILE_ON_BAT=low
-
-# Radeon dynamic power management method (DPM): battery, performance.
-RADEON_DPM_STATE_ON_AC=performance
-RADEON_DPM_STATE_ON_BAT=battery
-
-# Radeon DPM performance level: auto, low, high; auto is recommended.
-RADEON_DPM_PERF_LEVEL_ON_AC=auto
-RADEON_DPM_PERF_LEVEL_ON_BAT=auto
-
-# WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
-WIFI_PWR_ON_AC=off
-WIFI_PWR_ON_BAT=on
-
-# Disable wake on LAN: Y/N.
-WOL_DISABLE=Y
-
-# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
-# A value of 0 disables, >=1 enables power saving (recommended: 1).
-SOUND_POWER_SAVE_ON_AC=0
-SOUND_POWER_SAVE_ON_BAT=0
-
-# Disable controller too (HDA only): Y/N.
-SOUND_POWER_SAVE_CONTROLLER=N
-
-# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
-# Drive can be powered on again by releasing (and reinserting) the eject lever
-# or by pressing the disc eject button on newer models.
-# Note: an UltraBay/MediaBay hard disk is never powered off.
-BAY_POWEROFF_ON_AC=0
-BAY_POWEROFF_ON_BAT=0
-# Optical drive device to power off (default sr0).
-BAY_DEVICE="sr0"
-
-# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
-RUNTIME_PM_ON_AC=on
-RUNTIME_PM_ON_BAT=auto
-
-# Exclude PCI(e) device adresses the following list from Runtime PM
-# (separate with spaces). Use lspci to get the adresses (1st column).
-#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
-
-# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
-# Default when unconfigured is "amdgpu nouveau nvidia radeon" which
-# prevents accidential power-on of dGPU in hybrid graphics setups.
-# Use "" to disable the feature completely.
-# Separate multiple drivers with spaces.
-#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
-
-# Set to 0 to disable, 1 to enable USB autosuspend feature.
-USB_AUTOSUSPEND=1
-
-# Exclude listed devices from USB autosuspend (separate with spaces).
-# Use lsusb to get the ids.
-# Note: input devices (usbhid) are excluded automatically
-#USB_BLACKLIST="1111:2222 3333:4444"
-
-# Bluetooth devices are excluded from USB autosuspend:
-# 0=do not exclude, 1=exclude.
-USB_BLACKLIST_BTUSB=0
-
-# Phone devices are excluded from USB autosuspend:
-# 0=do not exclude, 1=exclude (enable charging).
-USB_BLACKLIST_PHONE=0
-
-# Printers are excluded from USB autosuspend:
-# 0=do not exclude, 1=exclude.
-USB_BLACKLIST_PRINTER=1
-
-# WWAN devices are excluded from USB autosuspend:
-# 0=do not exclude, 1=exclude.
-USB_BLACKLIST_WWAN=1
-
-# Include listed devices into USB autosuspend even if already excluded
-# by the blacklists above (separate with spaces).
-# Use lsusb to get the ids.
-#USB_WHITELIST="1111:2222 3333:4444"
-
-# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
-# (workaround for USB devices that cause shutdown problems).
-#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
-
-# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
-# on system startup: 0=disable, 1=enable.
-# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
-# are ignored when this is enabled!
-#RESTORE_DEVICE_STATE_ON_STARTUP=0
-RESTORE_DEVICE_STATE_ON_STARTUP=1
-
-# Radio devices to disable on startup: bluetooth, wifi, wwan.
-# Separate multiple devices with spaces.
-#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
-
-# Radio devices to enable on startup: bluetooth, wifi, wwan.
-# Separate multiple devices with spaces.
-#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
-
-# Radio devices to disable on shutdown: bluetooth, wifi, wwan.
-# (workaround for devices that are blocking shutdown).
-#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
-
-# Radio devices to enable on shutdown: bluetooth, wifi, wwan.
-# (to prevent other operating systems from missing radios).
-#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
-
-# Radio devices to enable on AC: bluetooth, wifi, wwan.
-#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
-
-# Radio devices to disable on battery: bluetooth, wifi, wwan.
-#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
-DEVICES_TO_DISABLE_ON_BAT="bluetooth"
-
-# Radio devices to disable on battery when not in use (not connected):
-# bluetooth, wifi, wwan.
-#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
-
-# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
-# required). Charging starts when the remaining capacity falls below the
-# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
-# Main / Internal battery (values in %)
-#START_CHARGE_THRESH_BAT0=75
-#STOP_CHARGE_THRESH_BAT0=80
-# Ultrabay / Slice / Replaceable battery (values in %)
-#START_CHARGE_THRESH_BAT1=75
-#STOP_CHARGE_THRESH_BAT1=80
-
-# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
-#RESTORE_THRESHOLDS_ON_BAT=1
-
-# ------------------------------------------------------------------------------
-# tlp-rdw - Parameters for the radio device wizard
-# Possible devices: bluetooth, wifi, wwan.
-
-# Hints:
-# - Parameters are disabled by default, remove the leading # to enable them
-# - Separate multiple radio devices with spaces
-
-# Radio devices to disable on connect.
-#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
-#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
-#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
-
-# Radio devices to enable on disconnect.
-#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
-#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
-#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
-
-# Radio devices to enable/disable when docked.
-#DEVICES_TO_ENABLE_ON_DOCK=""
-#DEVICES_TO_DISABLE_ON_DOCK=""
-
-# Radio devices to enable/disable when undocked.
-#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
-#DEVICES_TO_DISABLE_ON_UNDOCK=""
-#+end_src
-
-*** shemshak
-
-#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "shemshak")) "/sudo::/etc/default/tlp")
-# ------------------------------------------------------------------------------
-# tlp - Parameters for power saving
-# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
-
-# Hint: some features are disabled by default, remove the leading # to enable
-# them.
-
-# Set to 0 to disable, 1 to enable TLP.
-TLP_ENABLE=1
-
-# Operation mode when no power supply can be detected: AC, BAT.
-# Concerns some desktop and embedded hardware only.
-TLP_DEFAULT_MODE=AC
-
-# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
-# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
-TLP_PERSISTENT_DEFAULT=0
-
-# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
-# Non-zero value enables, zero disables laptop mode.
-DISK_IDLE_SECS_ON_AC=0
-DISK_IDLE_SECS_ON_BAT=2
-
-# Dirty page values (timeouts in secs).
-MAX_LOST_WORK_SECS_ON_AC=15
-MAX_LOST_WORK_SECS_ON_BAT=60
-
-# Hint: CPU parameters below are disabled by default, remove the leading #
-# to enable them, otherwise kernel default values are used.
-
-# Select a CPU frequency scaling governor.
-# Intel Core i processor with intel_pstate driver:
-# powersave(*), performance.
-# Older hardware with acpi-cpufreq driver:
-# ondemand(*), powersave, performance, conservative, schedutil.
-# (*) is recommended.
-# Hint: use tlp-stat -p to show the active driver and available governors.
-# Important:
-# powersave for intel_pstate and ondemand for acpi-cpufreq are power
-# efficient for *almost all* workloads and therefore kernel and most
-# distributions have chosen them as defaults. If you still want to change,
-# you should know what you're doing! You *must* disable your distribution's
-# governor settings or conflicts will occur.
-#CPU_SCALING_GOVERNOR_ON_AC=powersave
-#CPU_SCALING_GOVERNOR_ON_BAT=powersave
-
-# Set the min/max frequency available for the scaling governor.
-# Possible values strongly depend on your CPU. For available frequencies see
-# the output of tlp-stat -p.
-#CPU_SCALING_MIN_FREQ_ON_AC=0
-#CPU_SCALING_MAX_FREQ_ON_AC=0
-#CPU_SCALING_MIN_FREQ_ON_BAT=0
-#CPU_SCALING_MAX_FREQ_ON_BAT=0
-
-# Set energy performance hints (HWP) for Intel P-state governor:
-# performance, balance_performance, default, balance_power, power
-# Values are given in order of increasing power saving.
-# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
-CPU_HWP_ON_AC=balance_performance
-CPU_HWP_ON_BAT=balance_power
-
-# Set Intel P-state performance: 0..100 (%).
-# Limit the max/min P-state to control the power dissipation of the CPU.
-# Values are stated as a percentage of the available performance.
-# Requires an Intel Core i processor with intel_pstate driver.
-#CPU_MIN_PERF_ON_AC=0
-#CPU_MAX_PERF_ON_AC=100
-#CPU_MIN_PERF_ON_BAT=0
-#CPU_MAX_PERF_ON_BAT=30
-
-# Set the CPU "turbo boost" feature: 0=disable, 1=allow
-# Requires an Intel Core i processor.
-# Important:
-# - This may conflict with your distribution's governor settings
-# - A value of 1 does *not* activate boosting, it just allows it
-#CPU_BOOST_ON_AC=1
-#CPU_BOOST_ON_BAT=0
-
-# Minimize number of used CPU cores/hyper-threads under light load conditions:
-# 0=disable, 1=enable.
-SCHED_POWERSAVE_ON_AC=0
-SCHED_POWERSAVE_ON_BAT=1
-
-# Kernel NMI Watchdog:
-# 0=disable (default, saves power), 1=enable (for kernel debugging only).
-NMI_WATCHDOG=0
-
-# Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
-# Frequency voltage pairs are written to:
-# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
-# CAUTION: only use this, if you thoroughly understand what you are doing!
-#PHC_CONTROLS="F:V F:V F:V F:V"
-
-# Set CPU performance versus energy savings policy:
-# performance, balance-performance, default, balance-power, power.
-# Values are given in order of increasing power saving.
-# Requires kernel module msr and x86_energy_perf_policy from linux-tools.
-ENERGY_PERF_POLICY_ON_AC=performance
-ENERGY_PERF_POLICY_ON_BAT=balance-power
-
-# Disk devices; separate multiple devices with spaces (default: sda).
-# Devices can be specified by disk ID also (lookup with: tlp diskid).
-DISK_DEVICES="sda sdb"
-
-# Disk advanced power management level: 1..254, 255 (max saving, min, off).
-# Levels 1..127 may spin down the disk; 255 allowable on most drives.
-# Separate values for multiple disks with spaces. Use the special value 'keep'
-# to keep the hardware default for the particular disk.
-DISK_APM_LEVEL_ON_AC="254 254"
-DISK_APM_LEVEL_ON_BAT="128 128"
-
-# Hard disk spin down timeout:
-# 0: spin down disabled
-# 1..240: timeouts from 5s to 20min (in units of 5s)
-# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
-# See 'man hdparm' for details.
-# Separate values for multiple disks with spaces. Use the special value 'keep'
-# to keep the hardware default for the particular disk.
-#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
-#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
-
-# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
-# Separate values for multiple disks with spaces. Use the special value 'keep'
-# to keep the kernel default scheduler for the particular disk.
-#DISK_IOSCHED="cfq cfq"
-
-# AHCI link power management (ALPM) for disk devices:
-# min_power, med_power_with_dipm(*), medium_power, max_performance.
-# (*) Kernel >= 4.15 required, then recommended.
-# Multiple values separated with spaces are tried sequentially until success.
-SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
-SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
-
-# Exclude host devices from AHCI link power management.
-# Separate multiple hosts with spaces.
-#SATA_LINKPWR_BLACKLIST="host1"
-
-# Runtime Power Management for AHCI host and disks devices:
-# on=disable, auto=enable.
-# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
-#AHCI_RUNTIME_PM_ON_AC=on
-#AHCI_RUNTIME_PM_ON_BAT=on
-
-# Seconds of inactivity before disk is suspended.
-AHCI_RUNTIME_PM_TIMEOUT=15
-
-# PCI Express Active State Power Management (PCIe ASPM):
-# default, performance, powersave.
-PCIE_ASPM_ON_AC=performance
-PCIE_ASPM_ON_BAT=powersave
-
-# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
-# auto = mid on BAT, high on AC; default = use hardware defaults.
-RADEON_POWER_PROFILE_ON_AC=high
-RADEON_POWER_PROFILE_ON_BAT=low
-
-# Radeon dynamic power management method (DPM): battery, performance.
-RADEON_DPM_STATE_ON_AC=performance
-RADEON_DPM_STATE_ON_BAT=battery
-
-# Radeon DPM performance level: auto, low, high; auto is recommended.
-RADEON_DPM_PERF_LEVEL_ON_AC=auto
-RADEON_DPM_PERF_LEVEL_ON_BAT=auto
-
-# WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
-WIFI_PWR_ON_AC=off
-WIFI_PWR_ON_BAT=on
-
-# Disable wake on LAN: Y/N.
-WOL_DISABLE=Y
-
-# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
-# A value of 0 disables, >=1 enables power saving (recommended: 1).
-SOUND_POWER_SAVE_ON_AC=0
-SOUND_POWER_SAVE_ON_BAT=0
-
-# Disable controller too (HDA only): Y/N.
-SOUND_POWER_SAVE_CONTROLLER=N
-
-# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
-# Drive can be powered on again by releasing (and reinserting) the eject lever
-# or by pressing the disc eject button on newer models.
-# Note: an UltraBay/MediaBay hard disk is never powered off.
-BAY_POWEROFF_ON_AC=0
-BAY_POWEROFF_ON_BAT=0
-# Optical drive device to power off (default sr0).
-BAY_DEVICE="sr0"
-
-# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
-RUNTIME_PM_ON_AC=on
-RUNTIME_PM_ON_BAT=auto
-
-# Exclude PCI(e) device adresses the following list from Runtime PM
-# (separate with spaces). Use lspci to get the adresses (1st column).
-#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
-RUNTIME_PM_BLACKLIST="01:00.0"
-
-# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
-# Default when unconfigured is "amdgpu nouveau nvidia radeon" which
-# prevents accidential power-on of dGPU in hybrid graphics setups.
-# Use "" to disable the feature completely.
-# Separate multiple drivers with spaces.
-#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
-
-# Set to 0 to disable, 1 to enable USB autosuspend feature.
-USB_AUTOSUSPEND=1
-
-# Exclude listed devices from USB autosuspend (separate with spaces).
-# Use lsusb to get the ids.
-# Note: input devices (usbhid) are excluded automatically
-#USB_BLACKLIST="1111:2222 3333:4444"
-
-# Bluetooth devices are excluded from USB autosuspend:
-# 0=do not exclude, 1=exclude.
-USB_BLACKLIST_BTUSB=0
-
-# Phone devices are excluded from USB autosuspend:
-# 0=do not exclude, 1=exclude (enable charging).
-USB_BLACKLIST_PHONE=0
-
-# Printers are excluded from USB autosuspend:
-# 0=do not exclude, 1=exclude.
-USB_BLACKLIST_PRINTER=1
-
-# WWAN devices are excluded from USB autosuspend:
-# 0=do not exclude, 1=exclude.
-USB_BLACKLIST_WWAN=1
-
-# Include listed devices into USB autosuspend even if already excluded
-# by the blacklists above (separate with spaces).
-# Use lsusb to get the ids.
-#USB_WHITELIST="1111:2222 3333:4444"
-
-# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
-# (workaround for USB devices that cause shutdown problems).
-#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
-
-# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
-# on system startup: 0=disable, 1=enable.
-# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
-# are ignored when this is enabled!
-#RESTORE_DEVICE_STATE_ON_STARTUP=0
-RESTORE_DEVICE_STATE_ON_STARTUP=1
-
-# Radio devices to disable on startup: bluetooth, wifi, wwan.
-# Separate multiple devices with spaces.
-#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
-
-# Radio devices to enable on startup: bluetooth, wifi, wwan.
-# Separate multiple devices with spaces.
-#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
-
-# Radio devices to disable on shutdown: bluetooth, wifi, wwan.
-# (workaround for devices that are blocking shutdown).
-#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
-
-# Radio devices to enable on shutdown: bluetooth, wifi, wwan.
-# (to prevent other operating systems from missing radios).
-#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
-
-# Radio devices to enable on AC: bluetooth, wifi, wwan.
-#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
-
-# Radio devices to disable on battery: bluetooth, wifi, wwan.
-#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
-
-# Radio devices to disable on battery when not in use (not connected):
-# bluetooth, wifi, wwan.
-#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
-
-# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
-# required). Charging starts when the remaining capacity falls below the
-# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
-# Main / Internal battery (values in %)
-#START_CHARGE_THRESH_BAT0=75
-#STOP_CHARGE_THRESH_BAT0=80
-# Ultrabay / Slice / Replaceable battery (values in %)
-#START_CHARGE_THRESH_BAT1=75
-#STOP_CHARGE_THRESH_BAT1=80
-
-# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
-#RESTORE_THRESHOLDS_ON_BAT=1
-
-# ------------------------------------------------------------------------------
-# tlp-rdw - Parameters for the radio device wizard
-# Possible devices: bluetooth, wifi, wwan.
-
-# Hints:
-# - Parameters are disabled by default, remove the leading # to enable them
-# - Separate multiple radio devices with spaces
-
-# Radio devices to disable on connect.
-#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
-#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
-#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
-
-# Radio devices to enable on disconnect.
-#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
-#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
-#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
-
-# Radio devices to enable/disable when docked.
-#DEVICES_TO_ENABLE_ON_DOCK=""
-#DEVICES_TO_DISABLE_ON_DOCK=""
-
-# Radio devices to enable/disable when undocked.
-#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
-#DEVICES_TO_DISABLE_ON_UNDOCK=""
-#+end_src
-
-** X
-
-*** xprofile
-:PROPERTIES:
-:header-args+: :tangle ~/.xprofile
-:END:
-
-=~/.xprofile= is similar in style to =~/.xinitrc=, but on the
-contrary, it's automatically sourced by LightDM, my display manager of
-choice.
-
-#+begin_src sh :tangle no
-xset -b # disable bell
-xset r rate 200 45 # repeat delay (ms) and rate (repeats/sec)
-
-# setxkbmap -option compose:ralt
-
-setxkbmap -option ctrl:nocaps # turn capslock into control
-setxkbmap -option altwin:swap_alt_win # swap alt and super
-
-if [ $(hostname) = "plasma" ]
-then
- setxkbmap -option ctrl:rctrl_ralt # turn right control into right alt
-fi
-
-if [ $(hostname) = "enigma" ]
-then
- xmodmap -e "keycode 135 = Alt_R" # remap menu key to alt
-fi
-
-light -Scrs "intel_backlight" 2
-
-source $HOME/.zprofile
-
-export _JAVA_AWT_WM_NONREPARENTING=1
-export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
-
-if [ $(hostname) = "plasma" ]
-then
- unlock-def-gk.py &
-fi
-
-bspwm &
-#+end_src
-
-*** X resources
-
-**** Xresources
-:PROPERTIES:
-:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
-:END:
-
-#+begin_src conf-xdefaults
-#include ".Xresources.d/fonts"
-! #include ".Xresources.d/colors"
-#include ".Xresources.d/emacs"
-#include ".Xresources.d/rxvt-unicode"
-#+end_src
-
-**** Xresources.d
-
-***** fonts
-:PROPERTIES:
-:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
-:END:
-
-#+begin_src conf-xdefaults
-Xft.lcdfilter: lcddefault
-Xft.antialias: true
-Xft.autohint: 0
-Xft.hinting: true
-Xft.hintstyle: hintslight
-! Xft.hintstyle: hintfull
-Xft.rgba: rgb
-Xft.dpi: 96
-#+end_src
-
-***** colors
-:PROPERTIES:
-:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
-:END:
-
-#+begin_src conf-xdefaults :tangle no
-#include "gruvbox-light.xresources"
-! #include "gruvbox-dark.xresources"
-#include "gruvbox-urxvt256.xresources"
-#+end_src
-
-#+begin_src conf-xdefaults :tangle no
-! -----------------------------------------------------------------------------
-! File: gruvbox-light.xresources
-! Description: Retro groove colorscheme generalized
-! Author: morhetz <morhetz@gmail.com>
-! Source: https://github.com/morhetz/gruvbox-generalized
-! Last Modified: 6 Sep 2014
-! -----------------------------------------------------------------------------
-
-! hard contrast: *background: #f9f5d7
-*background: #fbf1c7
-! soft contrast: *background: #f2e5bc
-*foreground: #3c3836
-! Black + DarkGrey
-*color0: #fdf4c1
-*color8: #928374
-! DarkRed + Red
-*color1: #cc241d
-*color9: #9d0006
-! DarkGreen + Green
-*color2: #98971a
-*color10: #79740e
-! DarkYellow + Yellow
-*color3: #d79921
-*color11: #b57614
-! DarkBlue + Blue
-*color4: #458588
-*color12: #076678
-! DarkMagenta + Magenta
-*color5: #b16286
-*color13: #8f3f71
-! DarkCyan + Cyan
-*color6: #689d6a
-*color14: #427b58
-! LightGrey + White
-*color7: #7c6f64
-*color15: #3c3836
-#+end_src
-
-#+begin_src conf-xdefaults :tangle no
-! -----------------------------------------------------------------------------
-! File: gruvbox-dark.xresources
-! Description: Retro groove colorscheme generalized
-! Author: morhetz <morhetz@gmail.com>
-! Source: https://github.com/morhetz/gruvbox-generalized
-! Last Modified: 6 Sep 2014
-! -----------------------------------------------------------------------------
-
-! hard contrast: *background: #1d2021
-*background: #282828
-! soft contrast: *background: #32302f
-*foreground: #ebdbb2
-! Black + DarkGrey
-*color0: #282828
-*color8: #928374
-! DarkRed + Red
-*color1: #cc241d
-*color9: #fb4934
-! DarkGreen + Green
-*color2: #98971a
-*color10: #b8bb26
-! DarkYellow + Yellow
-*color3: #d79921
-*color11: #fabd2f
-! DarkBlue + Blue
-*color4: #458588
-*color12: #83a598
-! DarkMagenta + Magenta
-*color5: #b16286
-*color13: #d3869b
-! DarkCyan + Cyan
-*color6: #689d6a
-*color14: #8ec07c
-! LightGrey + White
-*color7: #a89984
-*color15: #ebdbb2
-#+end_src
-
-#+begin_src conf-xdefaults :tangle no
-! -----------------------------------------------------------------------------
-! File: gruvbox-urxvt256.xresources
-! Description: Retro groove colorscheme generalized
-! Author: morhetz <morhetz@gmail.com>
-! Source: https://github.com/morhetz/gruvbox-generalized
-! Last Modified: 13 Dec 2013
-! -----------------------------------------------------------------------------
-
-URxvt.color24: #076678
-URxvt.color66: #427b58
-URxvt.color88: #9d0006
-URxvt.color96: #8f3f71
-URxvt.color100: #79740e
-URxvt.color108: #8ec07c
-URxvt.color109: #83a598
-URxvt.color130: #af3a03
-URxvt.color136: #b57614
-URxvt.color142: #b8bb26
-URxvt.color167: #fb4934
-URxvt.color175: #d3869b
-URxvt.color208: #fe8019
-URxvt.color214: #fabd2f
-URxvt.color223: #ebdbb2
-URxvt.color228: #f2e5bc
-URxvt.color229: #fbf1c7
-URxvt.color230: #f9f5d7
-URxvt.color234: #1d2021
-URxvt.color235: #282828
-URxvt.color236: #32302f
-URxvt.color237: #3c3836
-URxvt.color239: #504945
-URxvt.color241: #665c54
-URxvt.color243: #7c6f64
-URxvt.color244: #928374
-URxvt.color245: #928374
-URxvt.color246: #a89984
-URxvt.color248: #bdae93
-URxvt.color250: #d5c4a1
-#+end_src
-
-***** emacs
-:PROPERTIES:
-:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
-:END:
-
-#+begin_src conf-xdefaults
-Emacs.menuBar: off
-Emacs.toolBar: off
-Emacs.verticalScrollBars: off
-Emacs.cursorBlink: off
-Emacs.FontBackend: xft,x
-! Emacs.font: Ubuntu Mono-12
-! Emacs.font: Triplicate T4C-11
-! Emacs.font: Ubuntu Mono-10.5
-! Emacs.font: Ubuntu Mono-12
-! Emacs.font: Iosevka-11
-
-! Emacs.font: Fira Mono:size=15
-! Emacs.font: DejaVu Sans Mono:size=15
-! Emacs.font: Inconsolata:size=17
-! Emacs.font: Inconsolata:size=16
-! Emacs.font: Inconsolata LGC:size=14
-! Emacs.font: Source Code Pro Medium-10.5
-Emacs.font: Source Code Pro:size=14
-! Emacs.font: Ubuntu Mono:size=16
-! Emacs.font: Iosevka:size=16
-#+end_src
-
-***** rxvt-unicode
-:PROPERTIES:
-:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
-:END:
-
-#+begin_src conf-xdefaults
-! Font
-URxvt.font: xft:source code pro:pixelsize=14:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
-URxvt.boldFont: xft:source code pro:semibold:pixelsize=14:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
-URxvt.italicFont: xft:source code pro:italic:pixelsize=14:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
-URxvt.bolditalicFont: xft:source code pro:semibold:italic:pixelsize=14:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
-
-URxvt.xftAntialias: true
-URxvt.letterSpace: 0
-
-URxvt.depth: 0
-URxvt.loginShell: true
-URxvt.saveLines: 100000
-URxvt.internalBorder: 3
-URxvt.lineSpace: 0
-URxvt.scrollBar: false
-URxvt.scrollStyle: rxvt
-URxvt*scrollTtyOutput: false
-URxvt*scrollWithBuffer: true
-URxvt*scrollTtyKeypress: true
-URxvt.keysym.Shift-Up: command:\033]720;1\007
-URxvt.keysym.Shift-Down: command:\033]721;1\007
-
-URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select
-URxvt.url-select.launcher: firefox
-URxvt.url-select.underline: true
-URxvt.keysym.M-u: perl:url-select:select_next
-URxvt.keysym.M-Escape: perl:keyboard-select:activate
-URxvt.keysym.M-s: perl:keyboard-select:search
-URxvt.url-launcher: /usr/bin/firefox
-URxvt.matcher.button: 1
-URxvt.iso14755: false
-URxvt.iso14755_53: false
-URxvt.keysym.M-c: perl:clipboard:copy
-URxvt.keysym.M-v: perl:clipboard:paste
-URxvt.keysym.C-A-V: perl:clipboard:paste_escaped
-URxvt.keysym.C-Up: font-size:increase
-URxvt.keysym.C-Down: font-size:decrease
-URxvt.keysym.C-S-Up: font-size:incglobal
-URxvt.keysym.C-S-Down: font-size:decglobal
-URxvt.keysym.C-equal: font-size:reset
-!URxvt.keysym.C-question: font-size:show
-
-URxvt.iconFile: /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
-
-!urxvt*foreground: white
-!urxvt*background: black
-
-!*color0: #2E3436
-!*color1: #a40000
-!*color2: #4E9A06
-!*color3: #C4A000
-!*color4: #3465A4
-!*color5: #75507B
-!*color6: #ce5c00
-!*color7: #babdb9
-!*color8: #555753
-!*color9: #EF2929
-!*color10: #8AE234
-!*color11: #FCE94F
-!*color12: #729FCF
-!*color13: #AD7FA8
-!*color14: #fcaf3e
-!*color15: #EEEEEC
-
-!URxvt.foreground: #C8C8C8
-!URxvt.background: #FFFFFF
-
-!! black
-!*color0: #2E3436
-!*color8: #555753
-!! red
-!*color1: #a40000
-!*color9: #EF2929
-!! green
-!*color2: #4E9A06
-!*color10: #8AE234
-!! yellow
-!*color3: #C4A000
-!*color11: #FCE94F
-!! blue
-!*color4: #3465A4
-!*color12: #729FCF
-!! purple
-!*color5: #75507B
-!*color13: #AD7FA8
-!! orange (replaces cyan)
-!*color6: #ce5c00
-!*color14: #fcaf3e
-!! white
-!*color7: #babdb9
-!*color15: #EEEEEC
-
-! Tango colour theme for rxvt-unicode
-URxvt.background: #FFFFFF
-URxvt.foreground: #000000
-
-! Black
-URxvt.color0: #2E3436
-URxvt.color8: #757773
-
-! Red
-URxvt.color1: #CC0000
-URxvt.color9: #EF2929
-
-! Green
-URxvt.color2: #4E9A06
-URxvt.color10: #8AE234
-
-! Yellow
-URxvt.color3: #C4A000
-URxvt.color11: #FCE94F
-
-! Blue
-URxvt.color4: #3465A4
-URxvt.color12: #729FCF
-
-! Magenta
-URxvt.color5: #75507B
-URxvt.color13: #AD7FA8
-
-!! Cyan
-!URxvt.color6: #06989A
-!URxvt.color14: #34E2E2
-! orange (replaces cyan)
-,*color6: #ce5c00
-,*color14: #fcaf3e
-
-! White
-URxvt.color7: #D3D7CF
-URxvt.color15: #EEEEEC
-#+end_src
-
-*** xkb us_ab keyboard layout
-
-#+begin_src conf :tangle "/sudo::/usr/share/X11/xkb/symbols/us_ab" :comments none
-default partial alphanumeric_keys
-xkb_symbols "us_ab" {
- include "us(basic)"
- name[Group1]= "English (US)(aminb)";
-
- key <MENU> { [ Alt_R ] };
-};
-#+end_src
-
-** XDG
-:PROPERTIES:
-:header-args+: :tangle ~/.config/user-dirs.dirs
-:END:
-
-#+begin_src conf
-XDG_DESKTOP_DIR="$HOME/Desktop"
-XDG_DOCUMENTS_DIR="$HOME/usr/docs"
-XDG_DOWNLOAD_DIR="$HOME/usr/dls"
-XDG_MUSIC_DIR="$HOME/usr/music"
-XDG_PICTURES_DIR="$HOME/usr/pics"
-XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
-XDG_TEMPLATES_DIR="$HOME/usr/Templates"
-XDG_VIDEOS_DIR="$HOME/usr/vids"
-#+end_src
-
-** Zathura
-:PROPERTIES:
-:header-args+: :tangle ~/.config/zathura/zathurarc
-:END:
-
-#+begin_src conf
-set smooth-scroll true
-set selection-clipboard clipboard
-set zoom-step 05
-set default-bg "#272727"
-set statusbar-bg "#272727"
-set inputbar-bg "#373737"
-#+end_src
-
-** Zsh
-
-My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
-[[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
-installed.
-
-*** zimrc
-:PROPERTIES:
-:header-args+: :tangle ~/.zimrc
-:END:
-
-#+begin_src sh
-#################
-# CORE SETTINGS #
-#################
-
-#
-# Zim settings
-#
-
-# Select what modules you would like enabled.
-# The second line of modules may depend on options set by modules in the first
-# line. These dependencies are noted on the respective module's README.md.
-zmodules=(directory environment git git-info history input ssh utility custom \
- syntax-highlighting history-substring-search prompt completion)
-
-
-###################
-# MODULE SETTINGS #
-###################
-
-#
-# Prompt
-#
-
-# Set your desired prompt here
-zprompt_theme='pure'
-#PURE_PROMPT_SYMBOL=λ
-#PURE_PROMPT_SYMBOL=δ
-PURE_PROMPT_SYMBOL=➜
-
-#
-# Completion
-#
-
-# set an optional host-specific filename for the completion cache file
-# if none is provided, the default '.zcompdump' is used.
-#zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
-
-#
-# Utility
-#
-
-# Uncomment to enable command correction prompts
-# See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
-setopt CORRECT
-
-#
-# Environment
-#
-
-# Set the string below to the desired terminal title format string.
-# The terminal title is redrawn upon directory change, however, variables like
-# ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
-# http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
-# The example below uses the following format: 'username@host:/current/directory'
-ztermtitle='%n@%m:%~'
-
-#
-# Input
-#
-
-# Uncomment to enable double-dot expansion.
-# This appends '../' to your input for each '.' you type after an initial '..'
-#zdouble_dot_expand='true'
-
-#
-# Syntax-Highlighting
-#
-
-# This determines what highlighters will be used with the syntax-highlighting module.
-# Documentation of the highlighters can be found here:
-# https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
-# For (u)rxvt, termite and gnome-terminal users,
-# removing the 'cursor' highlighter will fix the disappearing cursor problem
-#zhighlighters=(main brackets cursor)
-zhighlighters=(main brackets pattern)
-
-#
-# SSH
-#
-
-# Load these ssh identities with the ssh module
-zssh_ids=(id_ed25519_bandali)
-
-#
-# Pacman
-#
-
-# Set (optional) pacman front-end.
-zpacman_frontend='yay'
-
-# Load any helper scripts as defined here
-#zpacman_helper=(aur)
-
-
-#+end_src
-
-*** zlogin
-:PROPERTIES:
-:header-args+: :tangle ~/.zlogin
-:END:
-
-#+begin_src sh
-#
-# User configuration sourced by login shells
-#
-
-# Initialize zim
-[[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
-
-#+end_src
-
-*** zprofile
-:PROPERTIES:
-:header-args+: :tangle ~/.zprofile
-:END:
-
-#+begin_src sh
-#PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
-#PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
-export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
-export XDG_CONFIG_HOME=$HOME/.config
-export XDG_DATA_HOME=$HOME/.local/share
-export XDG_DATA_DIRS=/usr/local/share:/usr/share
-export MAILDIR="$HOME/mail"
-export CVS_RSH=ssh
-#export MATHMODELS=$HOME/src/eiffel/mathmodels
-#export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
-#export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
-
-# Eiffel2Java stuff
-#export JAVA_HOME=/usr/lib/jvm/default
-#export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
-#export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
-#export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
-
-#export PATH="$HOME/usr/build/pvs:$PATH"
-#export SBCLISP_HOME=/usr/share/sbcl-source
-#export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
-
-export MOZ_USE_XINPUT2=1 # precise scrolling in firefox
-
-#export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
-#export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
-
-export NIXPKGS=$HOME/src/git/nixpkgs
-
-if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
-
-export GUIX_LOCPATH="$HOME/.guix-profile/lib/locale"
-export PATH="/$HOME/.config/guix/current/bin${PATH:+:}$PATH"
-export SSL_CERT_DIR="$HOME/.guix-profile/etc/ssl/certs"
-export SSL_CERT_FILE="$HOME/.guix-profile/etc/ssl/certs/ca-certificates.crt"
-export GIT_SSL_CAINFO="$SSL_CERT_FILE"
-#+end_src
-
-*** zshenv
-:PROPERTIES:
-:header-args+: :tangle ~/.zshenv
-:END:
-
-#+begin_src sh
-# Ensure that a non-login, non-interactive shell has a defined environment.
-if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
- source "${ZDOTDIR:-$HOME}/.zprofile"
-fi
-#+end_src
-
-*** zshrc
-:PROPERTIES:
-:header-args+: :tangle ~/.zshrc
-:END:
-
-#+begin_src sh
-# Bash-like navigation
-#export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
-#export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
-export WORDCHARS='*?[]~=&;!#$%^(){}<>'
-#ZLE_SPACE_SUFFIX_CHARS=$'|&'
-
-#disable -r time # disable shell reserved word
-#alias time='time -p' # -p for POSIX output
-
-# rehash if last command was pacaur or pacman
-# (so that zsh picks up changes in $PATH immediately)
-TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
-
-#
-# User configuration sourced by interactive shells
-#
-
-# Define zim location
-export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
-
-# Start zim
-[[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
-
-ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
-#ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
-
-setopt globdots
-
-source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
-# source ~/.zsh/zsh-autopair/autopair.zsh
-
-
-### fzf ###
-
-source /usr/share/fzf/key-bindings.zsh
-source /usr/share/fzf/completion.zsh
-
-# Accept history selection instead of putting it on
-# the command line
-fzf-history-widget-accept() {
- fzf-history-widget
- zle accept-line
-}
-#zle -N fzf-history-widget-accept
-#bindkey '^R' fzf-history-widget-accept
-
-# alt+c preview
-export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
-
-### fzf ###
-
-
-# aliases
-alias mpv="mpv --ytdl-format mp4"
-alias mv="mv -iv"
-alias cp="cp -iv"
-alias scl=systemctl
-alias jcl=journalctl
-alias m="mbsync csclub; mbsync uwaterloo; mbsync amin"
-alias best="youtube-dl -f best"
-alias sd="ssh deb"
-alias sf="ssh fp"
-alias sn="ssh nix"
-
-aur() {
- cd ~/usr/build
- git clone https://aur.archlinux.org/${1}.git
- cd ${1}
-}
-
-# i-beam cursor
-echo -e "\033[5 q"
-#echo -e "\033[6 q"
-
-#+end_src
-
-* Scripts
-
-This section contains various useful scripts and the ones used by the
-programs above. For instance, =toggle-tablet= for switching to and
-from tablet mode on my X220T, =toggle-presentation-mode= for toggling
-Xfce's presentation mode which keeps the screen awake, and
-=rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
-exact brightness value.
-
-** battery-percentage-time
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/sh"
-:END:
-
-#+begin_src sh :tangle no
-dbus_send() {
- label=$1
- dbus-send --print-reply=literal --system \
- --dest=org.freedesktop.UPower \
- /org/freedesktop/UPower/devices/battery_BAT0 \
- org.freedesktop.DBus.Properties.Get \
- string:org.freedesktop.UPower.Device \
- string:"${label}" | awk '{print $3}'
-}
-
-perc=$(dbus_send 'Percentage')
-state=$(dbus_send 'State')
-
-if [ "$state" -eq 2 ]; then # Discharging
- secs=$(dbus_send 'TimeToEmpty')
-elif [ "$state" -eq 1 ]; then # Charging
- secs=$(dbus_send 'TimeToFull')
-fi
-
-printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60))
-#+end_src
-
-** my-i3status.py
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/my-i3status.py :shebang "#!/usr/bin/env python2"
-:END:
-
-#+begin_src python :comments none
-# -*- coding: utf-8 -*-
-
-# This script is a simple wrapper which prefixes each i3status line with custom
-# information. It is based on:
-# https://github.com/i3/i3status/blob/master/contrib/wrapper.py
-#
-# In ~/.i3status.conf, add the following line:
-# output_format = "i3bar"
-# in the 'general' section.
-# Then, in ~/.config/i3/config or ~/.config/sway/config add:
-# status_command i3status | my-i3status.py
-# in the 'bar' section. Make sure my-i3status.py is in $PATH.
-#
-# © 2012 Valentin Haenel <valentin.haenel@gmx.de>
-# © 2018 Amin Bandali <bandali@gnu.org>
-#
-# This program is free software. It comes without any warranty, to the extent
-# permitted by applicable law. You can redistribute it and/or modify it under
-# the terms of the Do What The Fuck You Want To Public License (WTFPL), Version
-# 2, as published by Sam Hocevar. See http://sam.zoy.org/wtfpl/COPYING for more
-# details.
-
-import sys
-import json
-import os
-
-def get_nosleep():
- """ Return true if ~/.nosleep exists. """
- return os.path.isfile(os.path.expanduser("~/.nosleep"))
-
-def print_line(message):
- """ Non-buffered printing to stdout. """
- sys.stdout.write(message + '\n')
- sys.stdout.flush()
-
-def read_line():
- """ Interrupted respecting reader for stdin. """
- # try reading a line, removing any extra whitespace
- try:
- line = sys.stdin.readline().strip()
- # i3status sends EOF, or an empty line
- if not line:
- sys.exit(3)
- return line
- # exit on ctrl-c
- except KeyboardInterrupt:
- sys.exit()
-
-if __name__ == '__main__':
- # Skip the first line which contains the version header.
- print_line(read_line())
-
- # The second line contains the start of the infinite array.
- print_line(read_line())
-
- while True:
- line, prefix = read_line(), ''
- # ignore comma at start of lines
- if line.startswith(','):
- line, prefix = line[1:], ','
-
- if get_nosleep():
- j = json.loads(line)
- # insert information into the start of the json, but could be anywhere
- j.insert(0, {'full_text' : '🖵 ', 'name' : 'nosleep'})
- # and echo back new encoded json
- print_line(prefix+json.dumps(j))
- else:
- print_line(prefix+line)
-#+end_src
-
-** rofi-light
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
-:END:
-
-#+begin_src bash
-cur=$(light -G)
-val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 12)
-[ -n "$val" ] && light -S $val
-#+end_src
-
-** rofi-remmina.py
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/rofi-remmina.py :shebang "#!/usr/bin/env python2"
-:END:
-
-#+begin_src python
-import ConfigParser
-import os
-from subprocess import Popen, PIPE
-
-remmina_dir = os.path.expanduser("~/.local/share/remmina")
-
-fdict = dict()
-
-for f in os.listdir(remmina_dir):
- fp = os.path.join(remmina_dir, f)
- c = ConfigParser.ConfigParser()
- c.read(fp)
- n = c.get('remmina', 'name')
- fdict[n] = fp
-
-lines = max(min(15, len(fdict)), 1);
-width = len(max(fdict.keys(), key=len))
-rofi = Popen(["rofi", "-i", "-dmenu", \
- "-l", str(lines), "-width", str(width), \
- "-p", "connection"], stdout=PIPE, stdin=PIPE)
-selected = rofi.communicate("\n" \
- .join(fdict.keys()) \
- .encode("utf-8"))[0] \
- .decode("utf-8") \
- .strip()
-rofi.wait()
-
-r = Popen(["remmina", "-c", fdict[selected]])
-r.wait()
-#+end_src
-
-** s (run sway)
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/s :shebang "#!/bin/bash"
-:END:
-
-#+begin_src bash
-export _JAVA_AWT_WM_NONREPARENTING=1
-export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
-light -Nr 2
-source $HOME/.zprofile
-sway
-#+end_src
-
-** sway-ws-util
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/sway-ws-util :shebang "#!/bin/bash"
-:END:
-
-#+begin_src bash
-curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name')
-[[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1))
-[[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1))
-dest_ws=-1
-op=-1
-
-if [ "$1" = "switch" ] || [ "$1" = "move" ]; then
- op="$1"
- if [ "$2" = "prev" ]; then
- dest_ws="$prev_ws"
- elif [ "$2" = "next" ]; then
- dest_ws="$next_ws"
- else
- echo "Usage: $0 $1 {prev|next} [follow]"
- exit 1
- fi
-else
- echo "Usage: $0 {switch|move} {prev|next} [follow]"
- exit 1
-fi
-
-if [ "$op" = "switch" ]; then
- sway workspace "$dest_ws"
-elif [ "$op" = "move" ]; then
- sway move container to workspace "$dest_ws"
- if [ "$3" = "follow" ]; then
- sway workspace "$dest_ws"
- fi
-fi
-#+end_src
-
-** toggle-layout
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
-:END:
-
-#+begin_src bash :tangle no
-lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
-
-if [ "$lang" = "us" ]; then
- setxkbmap ir
-else
- setxkbmap us
- # xmodmap $HOME/.Xmodmap
-fi
-#+end_src
-
-** toggle-presentation-mode
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
-:END:
-
-#+begin_src bash :tangle no
-xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
-#+end_src
-
-** toggle-tablet
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
-:END:
-
-This script toggles between a 'normal' mode and a 'tablet' mode, doing
-a few things:
-
-- rotates the screen using =xrandr=, so that rotating the physical
- display of my X220t would have the laptop's battery on the right
- hand side,
-- enables touch screen,
-- properly rotates the stylus pen and touch screen pointers, and
-- toggles between RGB and Vertical BGR sub-pixel order.
-
-#+begin_src bash :tangle no
-case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
- 0) # Screen is not rotated, we should rotate it right (90°)
- xrandr -o 3
- xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
- xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
- xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
- xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
- ;;
- 1) # Currently top is rotated right, we should set it normal (0°)
- xrandr -o 0
- xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
- xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
- xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
- xfconf-query -c xsettings -p /Xft/RGBA -s rgb
- ;;
- *)
- echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
- exit 1
- ;;
-esac
-#+end_src
-
-** unlock-def-gk.py
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
-:END:
-
-#+begin_src python :tangle no
-import gnomekeyring as gk
-# list_item_ids_sync('login')[0] == 1L
-gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
-#+end_src
-
-** volume-info
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh"
-:END:
-
-#+begin_src sh :tangle no
-cur_vol=$(pamixer --get-volume)
-
-if [ $(pamixer --get-mute) = true ]; then
- printf 'mt \n' "$cur_vol"
-else
- printf '%02d \n' "$cur_vol"
-fi
-#+end_src
-
-** wp
-
-My little wallpaper changer script.
-
-*** wp
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
-:END:
-
-#+begin_src bash :tangle no
-export DISPLAY=:0
-
-case "$1" in
- "day")
- feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
- ;;
- "night")
- feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
- ;;
- *)
- echo $"Usage: $0 {day|night}"
- exit 1
-esac
-#+end_src
-
-*** wp-auto
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
-:END:
-
-#+begin_src bash :tangle no
-SED=$(which sed)
-ROFI=$(which rofi)
-
-export DISPLAY=:0
-HOUR=$(date +%H)
-
-if [ -z "${SED}" ]
-then
- echo "Did not find 'sed', script cannot continue."
- exit 1
-fi
-if [ -z "${ROFI}" ]
-then
- echo "Did not find rofi, there is no point to continue."
- exit 1
-fi
-
-###
-# Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
-# Repeated calls should leave the config clean-ish
-###
-function set_theme()
-{
- CDIR="${HOME}/.config/rofi/"
- if [ ! -d "${CDIR}" ]
- then
- mkdir -p ${CDIR}
- fi
- if [ -f "${CDIR}/config" ]
- then
- ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
- fi
- echo "rofi.theme: ${1}" >> "${CDIR}/config"
-
-}
-
-if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
- then
- feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
- xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
- set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
- else
- feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
- xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
- set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
-fi
-#+end_src
-
-*** wp.service
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/wp.service
-:END:
-
-#+begin_src conf :tangle no
-[Unit]
-Description=wallpaper service
-
-[Service]
-Type=oneshot
-ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
-#+end_src
-
-*** wp.timer
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/wp.timer
-:END:
-
-#+begin_src conf :tangle no
-[Unit]
-[Unit]
-Description=wallpaper timer
-
-[Timer]
-OnCalendar=07,21:00
-Unit=wp.service
-Persistent=true
-
-[Install]
-WantedBy=timers.target
-#+end_src
-
-** zathura-sync.sh
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
-:END:
-
-#+begin_src sh
-pos="$1"
-pdffile="$2"
-zathura --synctex-forward "$pos" "$pdffile" || \
- (
- zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
- sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
-#+end_src
-** Fun :)
-
-*** eat-em
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
-:END:
-
-#+begin_src sh
-# Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
-# [ESC] character in original post removed here.
-
-# ANSI Color -- use these variables to easily have different color
-# and format output. Make sure to output the reset sequence after
-# colors (f = foreground, b = background), and use the 'off'
-# feature for anything you turn on.
-
-initializeANSI()
-{
- esc="$(echo -en '\e')"
-
- blackf="${esc}[30m"; redf="${esc}[31m"; greenf="${esc}[32m"
- yellowf="${esc}[33m" bluef="${esc}[34m"; purplef="${esc}[35m"
- cyanf="${esc}[36m"; whitef="${esc}[37m"
-
- blackb="${esc}[40m"; redb="${esc}[41m"; greenb="${esc}[42m"
- yellowb="${esc}[43m" blueb="${esc}[44m"; purpleb="${esc}[45m"
- cyanb="${esc}[46m"; whiteb="${esc}[47m"
-
- boldon="${esc}[1m"; boldoff="${esc}[22m"
- italicson="${esc}[3m"; italicsoff="${esc}[23m"
- ulon="${esc}[4m"; uloff="${esc}[24m"
- invon="${esc}[7m"; invoff="${esc}[27m"
-
- reset="${esc}[0m"
-}
-
-# note in this first use that switching colors doesn't require a reset
-# first - the new color overrides the old one.
-
-#clear
-
-initializeANSI
-
-cat << EOF
-
- ${yellowf} ▄███████▄${reset} ${redf} ▄██████▄${reset} ${greenf} ▄██████▄${reset} ${bluef} ▄██████▄${reset} ${purplef} ▄██████▄${reset} ${cyanf} ▄██████▄${reset}
- ${yellowf}▄█████████▀▀${reset} ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset} ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset} ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset} ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset} ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
- ${yellowf}███████▀${reset} ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset} ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset} ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset} ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset} ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
- ${yellowf}███████▄${reset} ${redf}████████████${reset} ${greenf}████████████${reset} ${bluef}████████████${reset} ${purplef}████████████${reset} ${cyanf}████████████${reset}
- ${yellowf}▀█████████▄▄${reset} ${redf}██▀██▀▀██▀██${reset} ${greenf}██▀██▀▀██▀██${reset} ${bluef}██▀██▀▀██▀██${reset} ${purplef}██▀██▀▀██▀██${reset} ${cyanf}██▀██▀▀██▀██${reset}
- ${yellowf} ▀███████▀${reset} ${redf}▀ ▀ ▀ ▀${reset} ${greenf}▀ ▀ ▀ ▀${reset} ${bluef}▀ ▀ ▀ ▀${reset} ${purplef}▀ ▀ ▀ ▀${reset} ${cyanf}▀ ▀ ▀ ▀${reset}
-
- ${boldon}${yellowf} ▄███████▄ ${redf} ▄██████▄ ${greenf} ▄██████▄ ${bluef} ▄██████▄ ${purplef} ▄██████▄ ${cyanf} ▄██████▄${reset}
- ${boldon}${yellowf}▄█████████▀▀ ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄ ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄ ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄ ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄ ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
- ${boldon}${yellowf}███████▀ ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███ ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███ ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███ ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███ ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
- ${boldon}${yellowf}███████▄ ${redf}████████████ ${greenf}████████████ ${bluef}████████████ ${purplef}████████████ ${cyanf}████████████${reset}
- ${boldon}${yellowf}▀█████████▄▄ ${redf}██▀██▀▀██▀██ ${greenf}██▀██▀▀██▀██ ${bluef}██▀██▀▀██▀██ ${purplef}██▀██▀▀██▀██ ${cyanf}██▀██▀▀██▀██${reset}
- ${boldon}${yellowf} ▀███████▀ ${redf}▀ ▀ ▀ ▀ ${greenf}▀ ▀ ▀ ▀ ${bluef}▀ ▀ ▀ ▀ ${purplef}▀ ▀ ▀ ▀ ${cyanf}▀ ▀ ▀ ▀${reset}
-
-EOF
-#+end_src
-
-*** invade-em
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
-:END:
-
-#+begin_src bash
-#
-# ANSI color scheme script featuring Space Invaders
-#
-# Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
-# Modified by lolilolicon
-#
-
-f=3 b=4
-for j in f b; do
- for i in {0..7}; do
- printf -v $j$i %b "\e[${!j}${i}m"
- done
-done
-bld=$'\e[1m'
-rst=$'\e[0m'
-
-cat << EOF
-
- $f1 ▀▄ ▄▀ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4 ▀▄ ▄▀ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
- $f1 ▄█▀███▀█▄ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4 ▄█▀███▀█▄ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
- $f1█▀███████▀█ $f2▀▀███▀▀███▀▀ $f3▀█▀██▀█▀ $f4█▀███████▀█ $f5▀▀███▀▀███▀▀ $f6▀█▀██▀█▀$rst
- $f1▀ ▀▄▄ ▄▄▀ ▀ $f2 ▀█▄ ▀▀ ▄█▀ $f3▀▄ ▄▀ $f4▀ ▀▄▄ ▄▄▀ ▀ $f5 ▀█▄ ▀▀ ▄█▀ $f6▀▄ ▄▀$rst
-
- $bld$f1▄ ▀▄ ▄▀ ▄ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4▄ ▀▄ ▄▀ ▄ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
- $bld$f1█▄█▀███▀█▄█ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4█▄█▀███▀█▄█ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
- $bld$f1▀█████████▀ $f2▀▀▀██▀▀██▀▀▀ $f3▀▀█▀▀█▀▀ $f4▀█████████▀ $f5▀▀▀██▀▀██▀▀▀ $f6▀▀█▀▀█▀▀$rst
- $bld$f1 ▄▀ ▀▄ $f2▄▄▀▀ ▀▀ ▀▀▄▄ $f3▄▀▄▀▀▄▀▄ $f4 ▄▀ ▀▄ $f5▄▄▀▀ ▀▀ ▀▀▄▄ $f6▄▀▄▀▀▄▀▄$rst
-
-
- $f7▌$rst
-
- $f7▌$rst
-
- $f7 ▄█▄ $rst
- $f7▄█████████▄$rst
- $f7▀▀▀▀▀▀▀▀▀▀▀$rst
-
-EOF
-#+end_src
projects / ~bandali / configs / blobdiff