X-Git-Url: https://git.shemshak.org/~bandali/configs/blobdiff_plain/25869427afed90745b6b65cc6072c24caa2d8373..b330422ccc0d36fda563e17e5b9b2084fd0799ad:/rc.org?ds=inline diff --git a/rc.org b/rc.org index 9dd226f..098a073 100644 --- a/rc.org +++ b/rc.org @@ -14,316 +14,12 @@ Note: This file is best viewed inside Emacs with org mode. This section contains the configuration files (dotfiles) of various programs I use. -** [[https://github.com/afewmail/afew][afew]] -:PROPERTIES: -:header-args+: :tangle ~/.config/afew/config -:END: - -#+begin_quote -an initial tagging script for notmuch mail -#+end_quote - -#+begin_src conf -# This is the default filter chain -[SpamFilter] -#[ClassifyingFilter] -[KillThreadsFilter] -#[ListMailsFilter] -[ArchiveSentMailsFilter] -sent_tag = sent -[InboxFilter] - -#[Filter.1] -#query = 'folder:amin/lists/.haskell-cafe' -#tags = +lists;+lists/haskell-cafe -#message = lists/haskell-cafe - -#[Filter.2] -#query = 'folder:amin/lists/.haskell-weekly' -#tags = +lists;+lists/haskell-weekly -#message = lists/haskell-weekly - -#[Filter.3] -#query = 'folder:amin/lists/.hackernewsletter' -#tags = +lists;+lists/hackernewsletter -#message = lists/hackernewsletter - - -#[FolderNameFilter] -#folder_blacklist = Inbox -#maildir_separator = /. -#folder_transforms = Drafts:draft Junk:spam Trash:deleted Sent:sent Archive:archive lists/haskell-cafe:lists/haskell-cafe -#+end_src - -** bspwm - -*** bspwmrc -:PROPERTIES: -:header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh" -:END: - -#+begin_src sh -sxhkd & -sh ~/.fehbg & -xfce4-panel -d & -#compton & -sleep 0.5 && pasystray --notify=all & - -bspc monitor -d I II III IV V VI VII VIII IX X -#bspc monitor eDP-1 -d I II III IV V -#bspc monitor HDMI-1 -d VI VII VIII IX X - -#bspc config border_width 2 -#bspc config window_gap 8 -bspc config window_gap 0 - -bspc config bottom_padding 26 - -bspc config split_ratio 0.52 -bspc config borderless_monocle true -bspc config gapless_monocle true -bspc config click_to_focus button1 -bspc config directional_focus_tightness low - -bspc rule -a Firefox desktop='^1' follow=on -bspc rule -a Nightly desktop='^1' follow=on -bspc rule -a Emacs desktop='^2' state=tiled follow=on -#bspc rule -a Chromium desktop='^4' follow=on -bspc rule -a URxvt state=floating -bspc rule -a URxvt:tiled state=tiled -bspc rule -a Connman-gtk state=floating -bspc rule -a Xfce4-panel state=floating -bspc rule -a TelegramDesktop state=floating -bspc rule -a Ec state=floating -bspc rule -a Pavucontrol state=floating -bspc rule -a Eog state=floating -bspc rule -a Seahorse state=floating -bspc rule -a mpv state=floating -bspc rule -a Evince state=floating -bspc rule -a Meld state=floating -bspc rule -a Autokey-gtk state=floating -bspc rule -a Mousepad state=floating -bspc rule -a Wrapper-1.0 state=floating -bspc rule -a File-roller state=floating -bspc rule -a Gnome-disks state=floating -bspc rule -a Termite state=floating -bspc rule -a Termite:tiled state=tiled -bspc rule -a Thunderbird:Calendar state=floating -bspc rule -a Audacity state=floating -bspc rule -a Proof state=floating # pvs x-show-proof -bspc rule -a Nm-connection-editor state=floating -bspc rule -a Wire state=floating -bspc rule -a discord state=floating -bspc rule -a X2goclient state=floating -bspc rule -a SimpleScreenRecorder state=floating -bspc rule -a Gimp state=floating -bspc rule -a Wrapper-2.0 state=floating -bspc rule -a Zathura state=tiled -#+end_src - -*** sxhkdrc -:PROPERTIES: -:header-args+: :tangle ~/.config/sxhkd/sxhkdrc -:END: - -#+begin_src conf -# -# wm independent hotkeys -# - -# terminal emulator -super + {_,shift} + Return - urxvt{_, -name tiled} - -#super + {_,shift} + Return -# termite{_, --name=tiled} - -# program launcher -super + space - rofi -show run -display-run '> ' -display-window ' 🗔 ' - -super + alt + space - xfce4-popup-whiskermenu - -# window finder -super + backslash - rofi -show window -display-run '> ' -display-window ' 🗔 ' - -# password manager -alt + space - rofi-pass - -# firefox -#super + r -# firefox - -# chromium -#super + c -# chromium -incognito - -# emacs -super + e - emacs - -# make sxhkd reload its configuration files: -super + Escape - pkill -USR1 -x sxhkd - -# volume {up,down} -XF86Audio{Raise,Lower}Volume - pamixer --allow-boost --{in,de}crease 5 - -# mute -XF86AudioMute - pamixer --toggle-mute - -# playback control -XF86Audio{Play,Prev,Next} - mpc {toggle,prev,next} - -# lock the screen -super + shift + q - light-locker-command -l - -# Toggle keyboard layout -super + F7 - toggle-layout - -# Toggle Xfce presentation mode -XF86LaunchB - toggle-presentation-mode - -# monitor brightness -XF86MonBrightness{Up,Down} - light -{A,U} 5 - -super + apostrophe - rofi-light - -# keyboard brightness -#XF86KbdBrightness{Up,Down} -# kbdlight {up,down} - -# -# bspwm hotkeys -# - -# quit bspwm normally -super + alt + Escape - bspc quit - -# close and kill -super + {w,q} - bspc node -{c,k} - -# alternate between the tiled and monocle layout -super + m - bspc desktop -l next - -# send the newest marked node to the newest preselected node -super + y - bspc node newest.marked.local -n newest.!automatic.local - -# swap the current node and the biggest node -super + g - bspc node -s biggest - -# -# state/flags -# - -# set the window state -super + {t,shift + t,s,f} - bspc node -t {tiled,pseudo_tiled,floating,fullscreen} - -# set the node flags -super + ctrl + {m,x,y,z} - bspc node -g {marked,locked,sticky,private} - -# -# focus/swap -# - -# focus the node in the given direction -super + {_,shift + }{h,j,k,l} - bspc node -{f,s} {west,south,north,east} - -# focus the node for the given path jump -super + {p,b,comma,period} - bspc node -f @{parent,brother,first,second} - -# focus the next/previous node in the current desktop -super + {_,shift + }c - bspc node -f {next,prev}.local - -# focus the next/previous desktop in the current monitor -super + bracket{left,right} - bspc desktop -f {prev,next}.local - -# send to next/prev desktop -super + shift + bracket{left,right} - bspc node -d {prev,next} --follow - -# focus the last node/desktop -super + {grave,Tab} - bspc {node,desktop} -f last - -# focus the older or newer node in the focus history -super + {o,i} - bspc wm -h off; \ - bspc node {older,newer} -f; \ - bspc wm -h on - -# focus or send to the given desktop -super + {_,shift + }{1-9,0} - bspc {desktop -f,node -d} '^{1-9,10}' - -# -# preselect -# - -# preselect the direction -super + ctrl + {h,j,k,l} - bspc node -p {west,south,north,east} - -# preselect the ratio -super + ctrl + {1-9} - bspc node -o 0.{1-9} - -# cancel the preselection for the focused node -super + ctrl + space - bspc node -p cancel - -# cancel the preselection for the focused desktop -super + ctrl + shift + space - bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel - -# -# move/resize -# - -# expand a window by moving one of its side outward -super + alt + {h,j,k,l} - bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0} - -# contract a window by moving one of its side inward -super + alt + shift + {h,j,k,l} - bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0} - -# move a floating window -super + {Left,Down,Up,Right} - bspc node -v {-20 0,0 20,0 -20,20 0} - -#alt + bracket{left,right} -# xdotool key --clearmodifiers ctrl+Page_{Up,Down} -#+end_src - ** compton :PROPERTIES: :header-args+: :tangle ~/.config/compton.conf :END: -#+begin_src conf +#+begin_src conf :tangle no # Shadow shadow = false; # Enabled client-side shadows on windows. no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows. @@ -424,6 +120,52 @@ wintypes: }; #+end_src +** dovecot +:PROPERTIES: +:header-args+: :tangle "/sudo::/etc/dovecot/dovecot.conf" +:END: + +#+begin_src conf +protocols = imap + +listen = 127.0.0.1 +log_path = /var/log/dovecot.log +info_log_path = /var/log/dovecot-info.log + +ssl = no +disable_plaintext_auth = no + +auth_verbose = yes +auth_mechanisms = plain + +passdb { + driver = passwd-file + args = /etc/dovecot/passwd +} + +userdb { + driver = static + args = uid=amin gid=amin home=/home/amin/mail/%d/%n + default_fields = mail=maildir:/home/amin/mail/%d/%n/mail +} + +# mail_home = /home/amin/mail/%d/%n +# mail_location = maildir:/home/amin/mail/%d/%n/mail:LAYOUT=fs:INBOX=/home/amin/mail/%d/%n/mail/Inbox + +# namespace { +# inbox = yes +# separator = / +# } + +mail_plugins = $mail_plugins fts fts_lucene + +plugin { + fts = lucene + fts_lucene = whitespace_chars=@. + fts_autoindex = yes +} +#+end_src + ** Dunst :PROPERTIES: :header-args+: :tangle ~/.config/dunst/dunstrc @@ -623,7 +365,7 @@ timeout = 0 ** Fontconfig :PROPERTIES: -:header-args+: :tangle ~/.config/fontconfig/fonts.conf +:header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none :END: #+begin_src xml @@ -660,13 +402,76 @@ timeout = 0 Helvetica - + Liberation Sans - + #+end_src +** getmail + +*** getmailrc +:PROPERTIES: +:header-args+: :tangle ~/.getmail/getmailrc +:END: + +#+begin_src conf +[retriever] +type = SimplePOP3SSLRetriever +server = fencepost.gnu.org +username = bandali +password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg") +port = 995 +use_apop = True + +[destination] +type = Maildir +path = ~/mail/gnu/Inbox/ + +# [destination] +# type = MDA_external +# path = /usr/lib/dovecot/deliver +# arguments = ('-d', 'amin@aminb.org') + +[options] +delete = True +#+end_src + +*** getmail.service +:PROPERTIES: +:header-args+: :tangle ~/.config/systemd/user/getmail.service +:END: + +#+begin_src conf :tangle no +[Unit] +Description=getmail service + +[Service] +Type=oneshot +ExecStart=/usr/bin/getmail +StandardOutput=syslog +StandardError=syslog +#+end_src + +*** getmail.timer +:PROPERTIES: +:header-args+: :tangle ~/.config/systemd/user/getmail.timer +:END: + +#+begin_src conf :tangle no +[Unit] +Description=getmail timer + +[Timer] +OnCalendar=*:0/30 +Persistent=true +Unit=getmail.service + +[Install] +WantedBy=timers.target +#+end_src + ** Git *** gitconfig @@ -678,14 +483,14 @@ timeout = 0 #+begin_src conf [user] name = Amin Bandali - email = amin@aminb.org - # signingkey = 4E05246AB0BF7FFB + email = bandali@gnu.org + signingkey = BE6273738E616D6D1B3A08E8A21A020248816103 #+end_src **** signing #+begin_src conf -# [commit] -# gpgsign = true +[commit] + gpgsign = true # [format] # signoff = true #+end_src @@ -721,6 +526,8 @@ timeout = 0 pr = pull --rebase ps = push psf = push --force + nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f" + nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f" #+end_src **** color @@ -753,6 +560,16 @@ timeout = 0 user = aminb #+end_src +**** send-email +#+begin_src conf +[sendemail] + smtpuser = bandali + smtpserver = fencepost.gnu.org + smtpserverport = 587 + smtpencryption = tls + annotate = yes +#+end_src + *** gitignore :PROPERTIES: :header-args+: :tangle ~/.gitignore_global @@ -768,83 +585,6 @@ timeout = 0 *-autoloads.el #+end_src -** Latexmk -:PROPERTIES: -:header-args+: :tangle ~/.latexmkrc -:END: - -#+begin_src conf -$pdf_previewer = "start zathura %O %S"; -$clean_ext = "aux out"; - -# $pdf_update_method = 4; -# $pdf_update_command = "zathura %O %S"; - -# Synctex allows one to jump to from the PDF in Zathura to the source in Emacs -# by Ctrl+click in the PDF. -# Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex -# editor. -# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S'; -#+end_src - -** getmail - -*** getmailrc -:PROPERTIES: -:header-args+: :tangle ~/.getmail/getmailrc -:END: - -#+begin_src conf -[retriever] -type = SimplePOP3SSLRetriever -server = fencepost.gnu.org -username = aminb -password_command = ("gpg2", "--no-tty", "-q", "-d", "~/.passwd/gnu.gpg") -port = 995 -use_apop = True - -[destination] -type = Maildir -path = ~/mail/gnu/Inbox/ - -[options] -delete = True -#+end_src - -*** getmail.service -:PROPERTIES: -:header-args+: :tangle ~/.config/systemd/user/getmail.service -:END: - -#+begin_src conf :tangle no -[Unit] -Description=getmail service - -[Service] -Type=oneshot -ExecStart=/usr/bin/getmail -StandardOutput=syslog -StandardError=syslog -#+end_src - -*** getmail.timer -:PROPERTIES: -:header-args+: :tangle ~/.config/systemd/user/getmail.timer -:END: - -#+begin_src conf :tangle no -[Unit] -Description=getmail timer - -[Timer] -OnCalendar=*:0/30 -Persistent=true -Unit=getmail.service - -[Install] -WantedBy=timers.target -#+end_src - ** GnuPG :PROPERTIES: :header-args+: :tangle ~/.gnupg/gpg-agent.conf @@ -893,38 +633,171 @@ gtk-font-name = Ubuntu 10 # gtk-key-theme-name = Emacs #+end_src -** isync +** [[https://github.com/Leinnan/i3gs][i3gs]] +:PROPERTIES: +:header-args+: :tangle ~/.config/i3gs/config +:END: -*** mbsyncrc +#+begin_src conf :comments none :tangle no +borders_width=0 0 2 0 +separator_width=10 + +#[mpd] +#preset=MPD +#title=  +#borders_color=#7FDBFF + +[ram] +preset=RAM +title=  +borders_color=#3D9970 + +#[cpu] +#preset=CPU +#title=  +#borders_color=#2ECC40 + +#[hdd] +#preset=HDD +#title=  +#borders_color=#01FF70 + +[volume] +command=volume-info +title= +borders_color=#7FDBFF + +[battery] +preset=BAT +command=battery-percentage-time +title=  +borders_color=#39CCCC + +[wifi] +preset=WIFI +title=  +borders_color=#01FF70 + +[date] +preset=DATE +command=date '+%-I:%M, %a %b %d ' +title=  +borders_color=#FFDC00 +separator_width=0 +#+end_src + +** i3status :PROPERTIES: -:header-args+: :tangle ~/.mbsyncrc +:header-args+: :tangle ~/.config/i3status/config :END: -#+begin_src conf -# Global defaults -CopyArrivalDate yes +#+begin_src conf :comments none +# i3status configuration file. +# see "man i3status" for documentation. -###### -IMAPAccount amin -Host nix.aminb.org -User amin@aminb.org -PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg" -SSLType IMAPS +# It is important that this file is edited as UTF-8. +# The following line should contain a sharp s: +# ß +# If the above line is not correctly displayed, fix your editor first! -IMAPStore amin-remote -Account amin +general { + colors = true + interval = 5 + output_format = "i3bar" +} -MaildirStore amin-local -Path ~/mail/amin/ -Inbox ~/mail/amin/Inbox -SubFolders Verbatim +# order += "ipv6" +order += "disk /" +order += "disk /data" +# order += "wireless _first_" +order += "ethernet _first_" +order += "battery 0" +order += "volume master" +# order += "load" +order += "tztime local" + +wireless _first_ { + format_up = "W:%quality %essid %ip" + format_down = "W: down" +} -Channel amin -Master :amin-remote: -Slave :amin-local: -Patterns * !dovecot* +ethernet _first_ { + # if you use %speed, i3status requires root privileges + # format_up = "E: %ip (%speed)" + format_up = "E: %ip" + format_down = "E: down" +} + +battery 0 { + format = "%status %percentage %remaining %consumption" + path = "/sys/class/power_supply/BAT%d/uevent" + low_threshold = "10" + threshold_type = "percentage" + last_full_capacity = true + integer_battery_capacity = true + hide_seconds = true +} + +tztime local { + format = "%A %Y-%m-%d %I:%M %p" +} + +volume master { + format = "♪ %volume" + format_muted = "🔇 %volume" + device = "pulse" +} + +load { + format = "%1min" +} + +disk "/" { + format = "/ %avail" +} + +disk "/data" { + format = "/data %avail" +} +#+end_src + +** isync + +*** mbsyncrc +:PROPERTIES: +:header-args+: :tangle ~/.mbsyncrc +:END: + +#+begin_src conf +# Global defaults +CopyArrivalDate yes Create Both -SyncState * +Expunge Both + +###### +IMAPAccount amin +Host mail.bndl.org +User amin@bndl.org +PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg" +SSLType IMAPS + +IMAPStore amin-remote +Account amin + +IMAPAccount amin-dovecot +Host 127.0.0.1 +Port 143 +User amin@bndl.org +PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin-dovecot.gpg" +SSLType None + +IMAPStore amin-local +Account amin-dovecot + +Channel amin +Master :amin-remote: +Slave :amin-local: +Patterns * ###### IMAPAccount uwaterloo @@ -936,17 +809,45 @@ SSLType IMAPS IMAPStore uwaterloo-remote Account uwaterloo -MaildirStore uwaterloo-local -Path ~/mail/uwaterloo/ -Inbox ~/mail/uwaterloo/Inbox -SubFolders Verbatim +IMAPAccount uwaterloo-dovecot +Host 127.0.0.1 +Port 143 +User abandali@uwaterloo.ca +PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo-dovecot.gpg" +SSLType None + +IMAPStore uwaterloo-local +Account uwaterloo-dovecot Channel uwaterloo Master :uwaterloo-remote: Slave :uwaterloo-local: -Patterns * !dovecot* -Create Both -SyncState * +Patterns * + +###### +IMAPAccount csclub +Host mail.csclub.uwaterloo.ca +User abandali +PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/csclub.gpg" +SSLType IMAPS + +IMAPStore csclub-remote +Account csclub + +IMAPAccount csclub-dovecot +Host 127.0.0.1 +Port 143 +User abandali@csclub.uw +PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/csclub-dovecot.gpg" +SSLType None + +IMAPStore csclub-local +Account csclub-dovecot + +Channel csclub +Master :csclub-remote: +Slave :csclub-local: +Patterns * #+end_src *** mbsync.service @@ -983,6 +884,113 @@ Unit=mbsync.service WantedBy=timers.target #+end_src +** Latexmk +:PROPERTIES: +:header-args+: :tangle ~/.latexmkrc +:END: + +#+begin_src conf +$pdf_previewer = "start zathura %O %S"; +$clean_ext = "aux out"; + +# $pdf_update_method = 4; +# $pdf_update_command = "zathura %O %S"; + +# Synctex allows one to jump to from the PDF in Zathura to the source in Emacs +# by Ctrl+click in the PDF. +# Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex +# editor. +# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S'; +#+end_src + +** libinput + +Improve XPS 15 9560's touchpad experience. + +# begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf") +#+begin_src conf :tangle no +Section "InputClass" + Identifier "libinput touchpad catchall" + Driver "libinput" + MatchIsTouchpad "on" + Option "ClickMethod" "clickfinger" + Option "NaturalScrolling" "true" + Option "Tapping" "on" + Option "TappingButtonMap" "lrm" +EndSection +#+end_src + +** mkinitcpio + +#+begin_src conf :tangle /sudo::/etc/mkinitcpio.conf :comments none +# vim:set ft=sh +# MODULES +# The following modules are loaded before any boot hooks are +# run. Advanced users may wish to specify all system modules +# in this array. For instance: +# MODULES=(piix ide_disk reiserfs) +MODULES=(i915) + +# BINARIES +# This setting includes any additional binaries a given user may +# wish into the CPIO image. This is run last, so it may be used to +# override the actual binaries included by a given hook +# BINARIES are dependency parsed, so you may safely ignore libraries +BINARIES=() + +# FILES +# This setting is similar to BINARIES above, however, files are added +# as-is and are not parsed in any way. This is useful for config files. +FILES=() + +# HOOKS +# This is the most important setting in this file. The HOOKS control the +# modules and scripts added to the image, and what happens at boot time. +# Order is important, and it is recommended that you do not change the +# order in which HOOKS are added. Run 'mkinitcpio -H ' for +# help on a given hook. +# 'base' is _required_ unless you know precisely what you are doing. +# 'udev' is _required_ in order to automatically load modules +# 'filesystems' is _required_ unless you specify your fs modules in MODULES +# Examples: +## This setup specifies all modules in the MODULES setting above. +## No raid, lvm2, or encrypted root is needed. +# HOOKS=(base) +# +## This setup will autodetect all modules for your system and should +## work as a sane default +# HOOKS=(base udev autodetect block filesystems) +# +## This setup will generate a 'full' image which supports most systems. +## No autodetection is done. +# HOOKS=(base udev block filesystems) +# +## This setup assembles a pata mdadm array with an encrypted root FS. +## Note: See 'mkinitcpio -H mdadm' for more information on raid devices. +# HOOKS=(base udev block mdadm encrypt filesystems) +# +## This setup loads an lvm2 volume group on a usb device. +# HOOKS=(base udev block lvm2 filesystems) +# +## NOTE: If you have /usr on a separate partition, you MUST include the +# usr, fsck and shutdown hooks. +HOOKS=(base udev autodetect modconf block keyboard encrypt lvm2 resume filesystems fsck) + +# COMPRESSION +# Use this to compress the initramfs image. By default, gzip compression +# is used. Use 'cat' to create an uncompressed image. +#COMPRESSION="gzip" +#COMPRESSION="bzip2" +#COMPRESSION="lzma" +#COMPRESSION="xz" +#COMPRESSION="lzop" +#COMPRESSION="lz4" + +# COMPRESSION_OPTIONS +# Additional options for the compressor +#COMPRESSION_OPTIONS=() +#+end_src + ** mpd :PROPERTIES: :header-args+: :tangle ~/.config/mpd/mpd.conf @@ -1412,24 +1420,37 @@ auth on #tls_trust_file /etc/ssl/certs/ca-certificates.crt logfile ~/.msmtp.log -# aminb -account aminb -host nix.aminb.org -tls_fingerprint BB:98:B3:02:83:B0:E0:C3:49:3E:C2:B2:A8:60:62:78:03:B3:5D:B3:BD:B8:0A:39:BB:E4:B0:66:D1:CF:D1:6B +# amin +account amin +host mail.bndl.org +# use `msmtp -a amin --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint +tls_fingerprint B8:17:DF:D7:26:56:4F:CD:F0:51:D5:E5:4C:44:B6:F1:C9:47:E7:A2:C7:36:C9:C1:F2:10:85:18:43:72:9D:ED tls_starttls on -from amin@aminb.org -user amin@aminb.org +from amin@bndl.org +user amin@bndl.org passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg +account aminb : amin +from amin@aminb.org + # gnu account gnu host fencepost.gnu.org -tls_fingerprint 94:0E:37:EB:EA:44:5A:4B:B6:6F:16:3D:6C:7E:7E:44:2D:93:61:C1:FE:82:A8:29:5E:3C:12:4E:2D:BE:0E:2C +# use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint +tls_fingerprint FB:DB:E3:7D:96:22:22:20:9F:4A:FD:70:96:99:50:5C:39:B2:29:D9:47:47:52:A8:5A:4A:DF:70:9D:21:DE:C4 tls_starttls on -from aminb@gnu.org -user aminb +from bandali@gnu.org +user bandali passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg +# gnu (old) +account gnu-aminb : gnu +from aminb@gnu.org +account gnu-amin : gnu +from amin@gnu.org +account gnu-mab : gnu +from mab@gnu.org + # uwaterloo account uwaterloo host connect.uwaterloo.ca @@ -1439,12 +1460,17 @@ user abandali passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg tls_trust_file /etc/ssl/certs/ca-certificates.crt -# uwaterloo (friendly address) -account uwaterloo-friendly : uwaterloo -from amin.bandali@uwaterloo.ca +# csclub +account csclub +host mail.csclub.uwaterloo.ca +tls_starttls on +from abandali@csclub.uwaterloo.ca +user abandali +passwordeval gpg2 --no-tty -q -d ~/.passwd/csclub.gpg +tls_trust_file /etc/ssl/certs/ca-certificates.crt # Set a default account -account default : aminb +account default : amin #+end_src ** ncmpcpp @@ -2045,7 +2071,7 @@ def_key "K" # configured here named ".notmuch". # [database] -path=/home/amin/mail +path=/home/amin/oldmail # User configuration # @@ -2065,7 +2091,7 @@ path=/home/amin/mail [user] name=Amin Bandali primary_email=amin@aminb.org -other_email=amin.bandali@uwaterloo.ca;mbandali@uwaterloo.ca;aminb@gnu.org; +other_email=bandali@gnu.org;abandali@uwaterloo.ca; # Configuration for "notmuch new" # @@ -2084,7 +2110,7 @@ other_email=amin.bandali@uwaterloo.ca;mbandali@uwaterloo.ca;aminb@gnu.org; [new] tags=new; #tags=unread;inbox; -ignore=.uidvalidity;.mbsyncstate +ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/ # Search configuration # @@ -2133,23 +2159,84 @@ synchronize_flags=true gpg_path=gpg #+end_src +*** pre-new hook +:PROPERTIES: +:header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh" +:END: + +#+begin_src sh +touch /tmp/gnusieve.log +sieve-filter -eW -o postmaster_address=postmaster@aminb.org \ + -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log +#+end_src + *** post-new hook :PROPERTIES: :header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh" :END: #+begin_src sh -afew -tn +# apply sent tag to messages sent by me +notmuch tag -new +sent -- from:amin@aminb.org or from:bandali@gnu.org or from:aminb@gnu.org or from:amin@gnu.org or from:mab@gnu.org or from:abandali@uwaterloo.ca + +# initial tagging +notmuch tag -latest -- tag:latest +notmuch tag +inbox +unread +latest -new -- tag:new + # apply tags to lists -notmuch tag +lists +lists/deepspec -- folder:amin/lists/deepspec -notmuch tag +lists +lists/haskell-cafe -- folder:amin/lists/haskell-cafe -notmuch tag +lists +lists/haskell-weekly -- folder:amin/lists/haskell-weekly -notmuch tag +lists +lists/hackernewsletter -- folder:amin/lists/hackernewsletter -notmuch tag +lists +lists/notmuch -- folder:amin/lists/notmuch -notmuch tag +lists +lists/info-gnu-emacs -- folder:amin/lists/info-gnu-emacs -notmuch tag +lists +lists/help-gnu-emacs -- folder:amin/lists/help-gnu-emacs -notmuch tag +lists +lists/emacs-devel -- folder:amin/lists/emacs-devel + +# +notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter +notmuch tag -inbox +lists/haskell-weekly -- folder:amin/lists/haskell-weekly + +notmuch tag -inbox +pay -- folder:amin/pay +notmuch tag -inbox +banking -- folder:amin/banking +notmuch tag -inbox +work -- folder:amin/work +# + +# +notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136 +notmuch tag -inbox +uw/cs846 -- folder:uwaterloo/lists/cs846 +notmuch tag -inbox +uw/ece750 -- folder:uwaterloo/lists/ece750 +notmuch tag -inbox +uw/se212 -- folder:uwaterloo/lists/se212 +notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463 + +notmuch tag -inbox +lists/alloytools -- folder:uwaterloo/lists/alloytools +notmuch tag -inbox +lists/clvsingle -- folder:uwaterloo/lists/Clvsingle +notmuch tag -inbox +lists/gsa -- folder:uwaterloo/lists/GSA +notmuch tag -inbox +lists/math-grad -- folder:uwaterloo/lists/Math-grad +notmuch tag -inbox +lists/scs-grads -- folder:uwaterloo/lists/scs-grads +notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students +# + +# +notmuch tag -inbox +l/emacs-devel -- folder:gnu/l/emacs-devel +notmuch tag -inbox +l/emacs-orgmode -- folder:gnu/l/emacs-orgmode +notmuch tag -inbox +l/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss +notmuch tag -inbox +l/fencepost-users -- folder:gnu/l/fencepost-users +notmuch tag -inbox +l/guix-devel -- folder:gnu/l/guix-devel +notmuch tag -inbox +l/guile-devel -- folder:gnu/l/guile-devel +notmuch tag -inbox +l/help-gnu-emacs -- folder:gnu/l/help-gnu-emacs +notmuch tag -inbox +l/info-gnu-emacs -- folder:gnu/l/info-gnu-emacs +notmuch tag -inbox +l/www-commits -- folder:gnu/l/www-commits +notmuch tag -inbox +l/www-discuss -- folder:gnu/l/www-discuss +notmuch tag -inbox +webmasters -- folder:gnu/webmasters + +notmuch tag -inbox +l/deepspec -- folder:gnu/l/deepspec +notmuch tag -inbox +l/haskell-cafe -- folder:gnu/l/haskell-cafe +notmuch tag -inbox +l/haskell-art -- folder:gnu/l/haskell-art +notmuch tag -inbox +l/notmuch -- folder:gnu/l/notmuch + +notmuch tag -inbox +l/~aminb/test-priv -- folder:gnu/l/~aminb/test-priv +notmuch tag -inbox +l/~sircmpwn/sr.ht-admins -- folder:gnu/l/~sircmpwn/sr.ht-admins +notmuch tag -inbox +l/~sircmpwn/sr.ht-announce -- folder:gnu/l/~sircmpwn/sr.ht-announce +notmuch tag -inbox +l/~sircmpwn/sr.ht-dev -- folder:gnu/l/~sircmpwn/sr.ht-dev +notmuch tag -inbox +l/~sircmpwn/sr.ht-discuss -- folder:gnu/l/~sircmpwn/sr.ht-discuss +# + +notmuch tag -inbox -unread +archive/notmuch -- path:archive/notmuch/** +notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/** #+end_src *** notmuch.service @@ -2186,145 +2273,2706 @@ Unit=notmuch.service WantedBy=timers.target #+end_src -** offlineimap +** pacman + +*** conf + +#+begin_src conf :tangle /sudo::/etc/pacman.conf :comments none +# +# /etc/pacman.conf +# +# See the pacman.conf(5) manpage for option and repository directives + +# +# GENERAL OPTIONS +# +[options] +# The following paths are commented out with their default values listed. +# If you wish to use different paths, uncomment and update the paths. +#RootDir = / +#DBPath = /var/lib/pacman/ +#CacheDir = /var/cache/pacman/pkg/ +#LogFile = /var/log/pacman.log +#GPGDir = /etc/pacman.d/gnupg/ +#HookDir = /etc/pacman.d/hooks/ +HoldPkg = pacman glibc +#XferCommand = /usr/bin/curl -L -C - -f -o %o %u +#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u +#CleanMethod = KeepInstalled +#UseDelta = 0.7 +Architecture = auto + +# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup +#IgnorePkg = +#IgnoreGroup = + +#NoUpgrade = +#NoExtract = + +# Misc options +#UseSyslog +Color +TotalDownload +CheckSpace +VerbosePkgLists + +# By default, pacman accepts packages signed by keys that its local keyring +# trusts (see pacman-key and its man page), as well as unsigned packages. +SigLevel = Required DatabaseOptional +LocalFileSigLevel = Optional +#RemoteFileSigLevel = Required + +# NOTE: You must run `pacman-key --init` before first using pacman; the local +# keyring can then be populated with the keys of all Arch/Parabola packagers +# with `pacman-key --populate archlinux` and `pacman-key --populate parabola`. + +# +# REPOSITORIES +# - can be defined here or included from another file +# - pacman will search repositories in the order defined here +# - local/custom mirrors can be added here or in separate files +# - repositories listed first will take precedence when packages +# have identical names, regardless of version number +# - URLs will have $repo replaced by the name of the current repo +# - URLs will have $arch replaced by the name of the architecture +# +# Repository entries are of the format: +# [repo-name] +# Server = ServerName +# Include = IncludePath +# +# The header [repo-name] is crucial - it must be present and +# uncommented to enable the repo. +# + +# The testing repositories are disabled by default. To enable, uncomment the +# repo name header and Include lines. You can add preferred servers immediately +# after the header, and they will be used before the default mirrors. + +# NOTE: Nonprism is a particular repository that aims to provide software built +# and patched without services under global data surveillance programs like PRISM, +# XKeyscore and Tempora. For more info see: https://wiki.parabola.nu/Nonprism + +#[nonprism-testing] +#Include = /etc/pacman.d/mirrorlist + +#[nonprism] +#Include = /etc/pacman.d/mirrorlist + +[libre-testing] +Include = /etc/pacman.d/mirrorlist + +[libre] +Include = /etc/pacman.d/mirrorlist + +#[testing] +#Include = /etc/pacman.d/mirrorlist + +[core] +Include = /etc/pacman.d/mirrorlist + +[extra] +Include = /etc/pacman.d/mirrorlist + +#[community-testing] +#Include = /etc/pacman.d/mirrorlist + +[community] +Include = /etc/pacman.d/mirrorlist + +# The PCR (Parabola Community Repository) contains packages maintained by trusted +# members of the Parabola community. It also contains packages maintained by +# Parabola developers, but that the developer decided didn't belong in core/libre. + +#[pcr-testing] +#Include = /etc/pacman.d/mirrorlist + +[pcr] +Include = /etc/pacman.d/mirrorlist + +# If you want to run 32 bit applications on your x86_64 system, +# enable the libre-multilib, multilib and pcr-multilib repositories as required here. + +#[nonprism-multilib-testing] +#Include = /etc/pacman.d/mirrorlist + +#[nonprism-multilib] +#Include = /etc/pacman.d/mirrorlist + +#[libre-multilib-testing] +#Include = /etc/pacman.d/mirrorlist + +#[libre-multilib] +#Include = /etc/pacman.d/mirrorlist + +#[multilib-testing] +#Include = /etc/pacman.d/mirrorlist + +#[multilib] +#Include = /etc/pacman.d/mirrorlist + +#[pcr-multilib-testing] +#Include = /etc/pacman.d/mirrorlist + +#[pcr-multilib] +#Include = /etc/pacman.d/mirrorlist + +# Parabola also supports another community projects and personal repositories, to +# find them check out this wiki page: https://wiki.parabola.nu/Repositories + +# An example of a custom package repository. See the pacman manpage for +# tips on creating your own repositories. +#[custom] +#SigLevel = Optional TrustAll +#Server = file:///home/custompkgs + +Include = /etc/pacman.d/*.conf +#+end_src + +*** mirrorlist + +#+begin_src conf :tangle /sudo::/etc/pacman.d/mirrorlist :comments none +# Parabola GNU/Linux-libre - Last Updated: Wed Dec 20 02:59:35 GMT 2017 + +Server = http://mirror.fsf.org/parabola/$repo/os/$arch +Server = http://mirror.fsf.org/parabola/$repo/os/$arch +Server = http://mirror.fsf.org/parabola/$repo/os/$arch +Server = http://mirror.fsf.org/parabola/$repo/os/$arch + +# Location: London, UK +# Responsible: Parabola Project +# Note: Not really a mirror, automatically redirects you to an Arch +# mirror when possible. Works best specifying it a few times in a +# row (404s workaround). +# Server = http://redirector.parabola.nu/$repo/os/$arch +Server = https://redirector.parabola.nu/$repo/os/$arch + +# Location: Reykjavík, Iceland +# Responsible: Parabola Project +# Note: Not really a mirror, automatically redirects you to a Parabola +# mirror that has the file you are looking for. +# Server = http://repomirror.parabola.nu/$repo/os/$arch +Server = https://repomirror.parabola.nu/$repo/os/$arch + +# Location: Falkenstein, Germany +# Server = http://mirror.grapentin.org/parabola/$repo/os/$arch +Server = https://mirror.grapentin.org/parabola/$repo/os/$arch + +# Location: Volendam, Netherlands +Server = https://jeweet.net/repo/parabola/$repo/os/$arch + +# Location: Amsterdam, Netherlands +# Note: Not really a mirror, but a high-speed 10GiB cache for +# mirror.yandex.ru/mirrors/parabola +# Server = http://parabola.isacdaavid.info:8080/$repo/os/$arch +Server = https://parabola.isacdaavid.info:8081/$repo/os/$arch + +# Location: Moscow, Russian Federation +# Server = http://mirror.yandex.ru/mirrors/parabola/$repo/os/$arch +Server = https://mirror.yandex.ru/mirrors/parabola/$repo/os/$arch + +# Location: Ho Chi Minh City, Vietnam +# Server = http://mirror.freedif.org/Parabola/$repo/os/$arch +Server = https://mirror.freedif.org/Parabola/$repo/os/$arch + +# Location: Los Angeles, CA, USA +# Note: Also visit http://alfplayer.com/ for its SNAPSHOTS ARCHIVE +Server = http://alfplayer.com/parabola/$repo/os/$arch + +# Location: Boston, MA, USA +Server = http://mirror.fsf.org/parabola/$repo/os/$arch + +# Location: Austin, TX, USA +# Server = http://parabola.serverpit.com/ +Server = https://parabola.serverpit.com/ + +# Location: Reykjavík, Iceland +# Responsible: Parabola Project +# Note: Currently pointing to repomirror.parabola.nu +# Server = http://repo.parabola.nu/$repo/os/$arch +Server = https://repo.parabola.nu/$repo/os/$arch +#+end_src -*** offlineimaprc +** pigeonhole +*** amin.sieve :PROPERTIES: -:header-args+: :tangle ~/.offlineimaprc +:header-args+: :tangle ~/mail/bndl.org/amin/sieve/amin.sieve :comments none :END: -#+begin_src conf :tangle no -[general] -pythonfile = ~/.offlineimap.py -accounts = Gmail, aminb -maxsyncaccounts = 3 +#+begin_src conf +require ["regex", "variables", "fileinto", "envelope", + "mailbox", "imap4flags", "include"]; + +# webmasters +if anyof ( + address :is "from" ["webmasters@gnu.org", "webmasters-comment@gnu.org"]) { + fileinto :create "gnu.webmasters"; + stop; +} -[Account Gmail] -localrepository = GmailL -remoterepository = GmailR +include :personal "lists"; +#+end_src -[Account aminb] -localrepository = aminbL -remoterepository = aminbR +*** lists.sieve +:PROPERTIES: +:header-args+: :tangle ~/mail/bndl.org/amin/sieve/lists.sieve :comments none +:END: -[Repository GmailL] -type = Maildir -localfolders = ~/Maildir/Gmail - -[Repository GmailR] -type = IMAP -remotehost = imap.gmail.com -remoteusereval = mailuser("gmail") -remotepasseval = mailpasswd("gmail") -sslcacertfile = /etc/ssl/certs/ca-certificates.crt -ssl = yes -folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail' -maxconnections = 1 -realdelete = no - -[Repository aminbL] -type = Maildir -localfolders = ~/Maildir/aminb +#+begin_src conf +require ["regex", "variables", "fileinto", "envelope", + "mailbox", "imap4flags", "include"]; + +# mailing lists +if anyof ( + header :contains "list-id" + [ "" + , "" + , "" + , "" + , "" + , "" + , "" + , "" + , "" + , "" + , "" + , "" + , "" + , "" + , "" + ] ) { + if header :regex "list-id" "<([a-z_0-9-]+)[.@]" { + set :lower "listname" "${1}"; + fileinto :create "gnu.${listname}"; + stop; + } +} -[Repository aminbR] -type = IMAP -remotehost = mail.aminb.org -remoteusereval = mailuser("aminb") -remotepasseval = mailpasswd("aminb") -sslcacertfile = /etc/ssl/certs/ca-certificates.crt -ssl = yes -folderfilter = lambda foldername: foldername not in 'dovecot.sieve' -maxconnections = 1 -realdelete = no +# sr.ht lists, with dots ('.') omitted +if anyof ( + header :contains "list-id" + [ "<~bandali/public-inbox@lists.sr.ht>" + , "<~sircmpwn/sr.ht-admins@lists.sr.ht>" + , "<~sircmpwn/sr.ht-announce@lists.sr.ht>" + , "<~sircmpwn/sr.ht-dev@lists.sr.ht>" + , "<~sircmpwn/sr.ht-discuss@lists.sr.ht>" + ] ) { + if header :regex "list-id" "(~[a-z_0-9-]+)/([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)@" { + set :lower "username" "${1}"; + set :lower "listname" "${2}${3}${4}${5}${6}${7}"; + fileinto :create "gnu.${username}.${listname}"; + stop; + } +} #+end_src -*** offlineimap.py +** PowerTOP :PROPERTIES: -:header-args+: :tangle ~/.offlineimap.py +:header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service" :END: -#+begin_src python :tangle no -import os -import subprocess +#+begin_src conf +[Unit] +Description=Powertop tunings -def mailpasswd(acct): - acct = os.path.basename(acct) - path = "/home/amin/.passwd/%s.gpg" % acct - args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path] - try: - return subprocess.check_output(args).strip() - except subprocess.CalledProcessError: - return "" - -def mailuser(acct): - acct = os.path.basename(acct) - path = "/home/amin/.passwd/%s" % acct - args = ["cat", path] - try: - return subprocess.check_output(args).strip() - except subprocess.CalledProcessError: - return "" +[Service] +ExecStart=/usr/bin/powertop --auto-tune +RemainAfterExit=true + +[Install] +WantedBy=multi-user.target +#+end_src -def prime_gpg_agent(): - ret = False - i = 1 - while not ret: - ret = (mailpasswd("prime") == "prime") - if i > 2: - from offlineimap.ui import getglobalui - sys.stderr.write("Error reading in passwords. Terminating.\n") - getglobalui().terminate() - i += 1 - return ret +** redshift +:PROPERTIES: +:header-args+: :tangle ~/.config/redshift.conf :comments none +:END: -prime_gpg_agent() +#+begin_src conf +; Global settings for redshift +[redshift] +; Set the day and night screen temperatures (Neutral is 6500K) +;temp-day=5700 +;temp-night=3500 + +;temp-day=6500 +temp-day=6200 +;temp-night=4800 +;temp-night=5000 +;temp-night=4500 +temp-night=4000 + +; Enable/Disable a smooth transition between day and night +; 0 will cause a direct change from day to night screen temperature. +; 1 will gradually increase or decrease the screen temperature. +transition=1 + +; Set the screen brightness. Default is 1.0. +;brightness=0.9 +; It is also possible to use different settings for day and night +; since version 1.8. +;brightness-day=0.7 +;brightness-night=0.4 +; Set the screen gamma (for all colors, or each color channel +; individually) +;gamma=0.8 +;gamma=1.0 +;gamma=0.8:0.7:0.8 +; This can also be set individually for day and night since +; version 1.10. +;gamma-day=0.8:0.7:0.8 +;gamma-night=0.6 + +; Set the location-provider: 'geoclue2' or 'manual' +; type 'redshift -l list' to see possible values. +; The location provider settings are in a different section. +;location-provider=manual +location-provider=geoclue2 + +; Set the adjustment-method: 'randr', 'vidmode' +; type 'redshift -m list' to see all possible values. +; 'randr' is the preferred method, 'vidmode' is an older API. +; but works in some cases when 'randr' does not. +; The adjustment method settings are in a different section. +adjustment-method=randr + +; Configuration of the location-provider: +; type 'redshift -l PROVIDER:help' to see the settings. +; ex: 'redshift -l manual:help' +; Keep in mind that longitudes west of Greenwich (e.g. the Americas) +; are negative numbers. +;[manual] +;lat=48.1 +;lon=11.6 + +; Configuration of the adjustment-method +; type 'redshift -m METHOD:help' to see the settings. +; ex: 'redshift -m randr:help' +; In this example, randr is configured to adjust screen 1. +; Note that the numbering starts from 0, so this is actually the +; second screen. If this option is not specified, Redshift will try +; to adjust _all_ screens. +;[randr] +;screen=1 #+end_src -* Scripts +** rofi +:PROPERTIES: +:header-args+: :tangle ~/.config/rofi/config +:END: -This section contains various useful scripts and the ones used by the -programs above. For instance, =toggle-tablet= for switching to and -from tablet mode on my X220T, =toggle-presentation-mode= for toggling -Xfce's presentation mode which keeps the screen awake, and -=rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an -exact brightness value. +#+begin_src conf +! rofi.font: Ubuntu Mono 13 +! rofi.font: Inconsolata 16 +! rofi.font: Iosevka 13 +! rofi.font: Source Code Pro 11 +rofi.font: Source Code Pro 10.5 +rofi.modi: run,window +! rofi.width: 640 +rofi.width: 600 +!rofi.location: 2 +!rofi.yoffset: 200 +rofi.monitor: -1 +!rofi.lines: 10 + +!rofi.theme: /usr/share/rofi/themes//Arc.rasi +!rofi.theme: /usr/share/rofi/themes//Paper.rasi +!rofi.theme: /usr/share/rofi/themes//sidebar.rasi + +rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi +#+end_src -** rofi-light +** rofi-pass :PROPERTIES: -:header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash" +:header-args+: :tangle ~/.config/rofi-pass/config :END: -#+begin_src bash -cur=$(light -G) -val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 8) -light -S $val +#+begin_src conf +# permanently set alternative root dir +# root=/path/to/root + +# rofi command. Make sure to have "$@" as last argument +_rofi () { + #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@" + rofi -i -no-auto-select -kb-accept-entry "!Return" "$@" +} + +# xdotool needs the keyboard layout to be set using setxkbmap +# You can do this in your autostart scripts (e.g. xinitrc) + +# If for some reason, you cannot do this, you can set the command here. +# and set fix_layout to true +fix_layout=false + +layout_cmd () { + setxkbmap us +} + +# fields to be used +URL_field='url' +USERNAME_field='user' +AUTOTYPE_field='autotype' + +# delay to be used for :delay keyword +delay=2 + +## Programs to be used +# Editor +EDITOR='gvim -f' + +# Browser +BROWSER='chromium' + +## Misc settings + +default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl +auto_enter='false' +notify='false' +default_autotype='user :tab pass' + +# color of the help messages +# leave empty for autodetection +help_color="#4872FF" + +# Clipboard settings +# Possible options: primary, clipboard, both +clip=primary + +# Options for generating new password entries +# default_user is also used for password files that have no user field. +default_user=aminb +default_user2=bandali +password_length=30 + +# Custom Keybindings +#autotype="Alt+1" +autotype="Alt+m" +type_user="Alt+2" +type_pass="Alt+3" +open_url="Alt+4" +copy_name="Alt+u" +copy_url="Alt+l" +copy_pass="Alt+p" +show="Alt+o" +copy_entry="Alt+2" +type_entry="Alt+1" +copy_menu="Alt+c" +action_menu="Alt+a" +type_menu="Alt+t" +help="Alt+h" +switch="Alt+x" +insert_pass="Alt+n" #+end_src -** toggle-layout +** sway + +*** main :PROPERTIES: -:header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash" +:header-args+: :tangle ~/.config/sway/config :END: -#+begin_src bash -lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)" +#+begin_src conf +### Variables +# super +set $mod Mod4 +# alt +set $mod2 Mod1 +set $left h +set $down j +set $up k +set $right l +set $term alacritty +set $term2 urxvt +set $menu rofi -show run -display-run '> ' -display-window ' 🗔 ' + +### Output configuration +# +# Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/) +output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill +# +# Example configuration: +# +# output HDMI-A-1 resolution 1920x1080 position 1920,0 +# +# You can get the names of your outputs by running: swaymsg -t get_outputs + +output DP-1 res 2560x1440 pos 0,0 +# 597 = (2560/2) - (1366/2) +output LVDS-1 pos 597,1440 + +### Idle configuration + +exec swayidle \ + timeout 120 '[ -f ~/.nosleep ] || swaymsg "output * dpms off"' \ + resume '[ -f ~/.nosleep ] || swaymsg "output * dpms on"' \ + + +### Key bindings +# +# Basics: +# + # start a terminal + bindsym $mod+Return exec $term + bindsym $mod+Shift+Return exec $term2 + + # kill focused window + bindsym $mod+Shift+q kill + + # start your launcher + bindsym $mod+d exec $menu + + # password manager + bindsym $mod2+space exec rofi-pass + + # Drag floating windows by holding down $mod and left mouse button. + # Resize them with right mouse button + $mod. + # Despite the name, also works for non-floating windows. + # Change normal to inverse to use left mouse button for resizing and right + # mouse button for dragging. + floating_modifier $mod normal + + # reload the configuration file + bindsym $mod+Shift+c reload + + # exit sway (logs you out of your wayland session) + # bindsym $mod+Shift+e exit + + bindsym $mod+apostrophe exec rofi-light # rofi-based brightness chooser + bindsym XF86MonBrightnessUp exec light -A 5 # increase screen brightness + bindsym XF86MonBrightnessDown exec light -U 5 # decrease screen brightness + + bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5 + bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5 + bindsym XF86AudioMute exec pamixer --toggle-mute + bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle + + bindsym $mod+Shift+apostrophe exec rofi-remmina.py # choose remmina connection + + # original sway workspace switch and window move + bindsym $mod+bracketleft workspace prev + bindsym $mod+bracketright workspace next + bindsym $mod+braceleft move container to workspace prev + bindsym $mod+braceright move container to workspace next + + # bspwm-esque workspace switch and window move + bindsym $mod2+bracketleft exec sway-ws-util switch prev + bindsym $mod2+bracketright exec sway-ws-util switch next + bindsym $mod2+braceleft exec sway-ws-util move prev follow + bindsym $mod2+braceright exec sway-ws-util move next follow +# +# Moving around: +# + # Move your focus around + bindsym $mod+$left focus left + bindsym $mod+$down focus down + bindsym $mod+$up focus up + bindsym $mod+$right focus right + # or use $mod+[up|down|left|right] + bindsym $mod+Left focus left + bindsym $mod+Down focus down + bindsym $mod+Up focus up + bindsym $mod+Right focus right + + # _move_ the focused window with the same, but add Shift + bindsym $mod+Shift+$left move left + bindsym $mod+Shift+$down move down + bindsym $mod+Shift+$up move up + bindsym $mod+Shift+$right move right + # ditto, with arrow keys + bindsym $mod+Shift+Left move left + bindsym $mod+Shift+Down move down + bindsym $mod+Shift+Up move up + bindsym $mod+Shift+Right move right +# +# Workspaces: +# + # switch to workspace + bindsym $mod+1 workspace 1 + bindsym $mod+2 workspace 2 + bindsym $mod+3 workspace 3 + bindsym $mod+4 workspace 4 + bindsym $mod+5 workspace 5 + bindsym $mod+6 workspace 6 + bindsym $mod+7 workspace 7 + bindsym $mod+8 workspace 8 + bindsym $mod+9 workspace 9 + bindsym $mod+0 workspace 10 + # move focused container to workspace + bindsym $mod+Shift+1 move container to workspace 1 + bindsym $mod+Shift+2 move container to workspace 2 + bindsym $mod+Shift+3 move container to workspace 3 + bindsym $mod+Shift+4 move container to workspace 4 + bindsym $mod+Shift+5 move container to workspace 5 + bindsym $mod+Shift+6 move container to workspace 6 + bindsym $mod+Shift+7 move container to workspace 7 + bindsym $mod+Shift+8 move container to workspace 8 + bindsym $mod+Shift+9 move container to workspace 9 + bindsym $mod+Shift+0 move container to workspace 10 + # Note: workspaces can have any name you want, not just numbers. + # We just use 1-10 as the default. +# +# Layout stuff: +# + # You can "split" the current object of your focus with + # $mod+b or $mod+v, for horizontal and vertical splits + # respectively. + bindsym $mod+b splith + bindsym $mod+v splitv + + # Switch the current container between different layout styles + bindsym $mod+s layout stacking + bindsym $mod+w layout tabbed + bindsym $mod+e layout toggle split + + # Make the current focus fullscreen + bindsym $mod+f fullscreen + + # Toggle sticky-ness of the current (floating) window + bindsym $mod+$mod2+space sticky toggle + + # Toggle the current focus between tiling and floating mode + bindsym $mod+Shift+space floating toggle + + # Swap focus between the tiling area and the floating area + bindsym $mod+space focus mode_toggle + + # move focus to the parent container + bindsym $mod+a focus parent +# +# Scratchpad: +# + # Sway has a "scratchpad", which is a bag of holding for windows. + # You can send windows there and get them back later. + + # Move the currently focused window to the scratchpad + bindsym $mod+Shift+minus move scratchpad + + # Show the next scratchpad window or hide the focused scratchpad window. + # If there are multiple scratchpad windows, this command cycles through them. + bindsym $mod+minus scratchpad show +# +# Resizing containers: +# +mode "resize" { + # left will shrink the containers width + # right will grow the containers width + # up will shrink the containers height + # down will grow the containers height + bindsym $left resize shrink width 10px + bindsym $down resize grow height 10px + bindsym $up resize shrink height 10px + bindsym $right resize grow width 10px + + # ditto, with arrow keys + bindsym Left resize shrink width 10px + bindsym Down resize grow height 10px + bindsym Up resize shrink height 10px + bindsym Right resize grow width 10px + + # return to default mode + bindsym Return mode "default" + bindsym Escape mode "default" +} +bindsym $mod+Shift+r mode "resize" + +# +# Power button +# + +set $mode_system System (l)ock, (e)xit sway, (s)uspend, (h)ibernate, (r)eboot, (S)hutdown +mode "$mode_system" { + bindsym l exec swaylock, mode "default" + bindsym e exec swaymsg exit, mode "default" + bindsym s exec systemctl suspend, mode "default" + bindsym h exec systemctl hibernate, mode "default" + bindsym r exec systemctl reboot, mode "default" + bindsym Shift+s exec systemctl poweroff -i, mode "default" + + # back to normal: Enter, Escape, or q + bindsym Return mode "default" + bindsym Escape mode "default" + bindsym q mode "default" +} +# bindsym XF86PowerOff mode "$mode_system" +bindsym $mod+Shift+e mode "$mode_system" + +# +# Presentation mode +# + +bindsym $mod+$mod2+p exec ([ ! -e ~/.nosleep ] && touch ~/.nosleep || rm ~/.nosleep) && killall -USR1 i3status + +# +# Notifications +# + +bindsym $mod+Shift+n mode notifications +mode notifications { + bindsym Return exec makoctl invoke; exec makoctl dismiss; mode default + bindsym d exec makoctl dismiss; mode default + bindsym Shift+d exec makoctl dismiss -a; mode default + + bindsym Escape mode default + bindsym q mode default +} + +# +# Screenshotting +# + +bindsym $mod+Shift+s mode screenshot +mode screenshot { + bindsym a exec grim $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default + bindsym r exec slurp | grim -g - $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default + + bindsym Escape mode default + bindsym q mode default +} + +# +# Window configurations +# +for_window [class="mpv"] floating enable +for_window [class="TelegramDesktop"] floating enable +for_window [app_id="pavucontrol"] floating enable +for_window [app_id="meld"] floating enable +for_window [app_id="nm-connection-editor"] floating enable + +set $blue #285577 +set $gray #1e1f21 +set $red #900000 + +# +# Status Bar: +# +# Read `man 5 sway-bar` for more information about this section. +bar { + position bottom + colors { + background $gray + inactive_workspace $gray $gray #888888 + active_workspace $gray $gray #ffffff + urgent_workspace $red $red #ffffff + focused_workspace $blue $blue #ffffff + } + status_command i3status | my-i3status.py +} + +client.focused $blue $blue #ffffff $blue $blue +client.unfocused $gray $gray #ffffff $gray $gray +client.focused_inactive $gray $gray #ffffff $gray $gray + +# font pango: benis uushi 9 +# font pango: Ubuntu Mono 11 +# font pango: Inconsolata 11 +font pango: DejaVu Sans Mono 9 +# font pango: Liberation Mono 9 + +# get rid of title bars +default_border pixel 4 + +exec xrdb .Xresources +# exec pgrep -x "systemd-inhibit" || \ +# systemd-inhibit --what=handle-power-key --who=aminb \ +# --why="Handle power button in sway" sleep infinity +exec mako 2>&1 >/tmp/mako.log +exec /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1 + +include /etc/sway/config.d/* +include ~/.config/sway/`hostname` + +exec systemd-notify --ready || true -if [ "$lang" = "us" ]; then - setxkbmap ir -else - setxkbmap us - # xmodmap $HOME/.Xmodmap -fi #+end_src -** toggle-presentation-mode +*** langa :PROPERTIES: -:header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash" +:header-args+: :tangle ~/.config/sway/langa :END: -#+begin_src bash -xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T +#+begin_src conf +input "2:7:SynPS/2_Synaptics_TouchPad" { + events disabled + dwt enabled + tap enabled + natural_scroll enabled + click_method clickfinger +} + +input "1:1:AT_Translated_Set_2_keyboard" { + repeat_delay 200 + repeat_rate 45 + xkb_layout us_ab,ir + xkb_options ctrl:nocaps,altwin:swap_alt_win,grp:shifts_toggle +} + +input "65261:24672:technomancy_Atreus" { + repeat_delay 200 + repeat_rate 45 +} +#+end_src + +*** shemshak +:PROPERTIES: +:header-args+: :tangle ~/.config/sway/shemshak +:END: + +#+begin_src conf +input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" { + dwt enabled + tap enabled + natural_scroll enabled + middle_emulation enabled + click_method clickfinger +} + +input "1:1:AT_Translated_Set_2_keyboard" { + repeat_delay 200 + repeat_rate 45 + xkb_layout us,ir + xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle +} +#+end_src +** swaylock +:PROPERTIES: +:header-args+: :tangle ~/.config/swaylock/config +:END: + +#+begin_src conf +image=/home/amin/usr/pics/wp/wp2445784-blurred-wallpapers.jpg +scaling=fill +#+end_src +** systemd + +Keep boot messages on tty1 (see [[https://wiki.archlinux.org/index.php/getty#Have_boot_messages_stay_on_tty1][here]]) + +#+begin_src conf :tangle /sudo::/etc/systemd/system/getty@tty1.service.d/noclear.conf +[Service] +TTYVTDisallocate=no +#+end_src + +** TLP + +*** langa + +#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "langa")) "/sudo::/etc/default/tlp") +# ------------------------------------------------------------------------------ +# tlp - Parameters for power saving +# See full explanation: https://linrunner.de/en/tlp/docs/tlp-configuration.html + +# Notes: +# - Some parameters are disabled, remove the leading '#' to enable # them; +# shown values are suggestions not defaults +# - Default *: intrinsic default that is effective when the parameter is missing +# or disabled by a leading '#'; use PARAM="" to disable intrinsic defaults for +# parameters with text string values +# - Default : do nothing or use kernel/hardware defaults + +# Set to 0 to disable, 1 to enable TLP. +# Default: 0 +TLP_ENABLE=1 + +# Operation mode when no power supply can be detected: AC, BAT. +# Concerns some desktop and embedded hardware only. +# Default: +TLP_DEFAULT_MODE=AC + +# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE +# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC. +# Default: 0 +TLP_PERSISTENT_DEFAULT=0 + +# Seconds laptop mode has to wait after the disk goes idle before doing a sync. +# Non-zero value enables, zero disables laptop mode. +# Default: 0 (AC), 2 (BAT) +DISK_IDLE_SECS_ON_AC=0 +DISK_IDLE_SECS_ON_BAT=2 + +# Dirty page values (timeouts in secs). +# Default: 15 (AC + BAT) +MAX_LOST_WORK_SECS_ON_AC=15 +MAX_LOST_WORK_SECS_ON_BAT=60 + +# Note: CPU parameters below are disabled by default, remove the leading # +# to enable them, otherwise kernel defaults will be used. + +# Select a CPU frequency scaling governor. +# Intel Core i processor with intel_pstate driver: +# powersave(*), performance. +# Older hardware with acpi-cpufreq driver: +# ondemand(*), powersave, performance, conservative, schedutil. +# (*) is recommended. +# Use tlp-stat -p to show the active driver and available governors. +# Important: +# powersave for intel_pstate and ondemand for acpi-cpufreq are power +# efficient for *almost all* workloads and therefore kernel and most +# distributions have chosen them as defaults. If you still want to change, +# you should know what you're doing! You *must* disable your distribution's +# governor settings or conflicts will occur. +# Default: +#CPU_SCALING_GOVERNOR_ON_AC=powersave +#CPU_SCALING_GOVERNOR_ON_BAT=powersave + +# Set the min/max frequency available for the scaling governor. +# Possible values depend on your CPU. For available frequencies see +# the output of tlp-stat -p. +# Default: +#CPU_SCALING_MIN_FREQ_ON_AC=0 +#CPU_SCALING_MAX_FREQ_ON_AC=0 +#CPU_SCALING_MIN_FREQ_ON_BAT=0 +#CPU_SCALING_MAX_FREQ_ON_BAT=0 + +# Set energy performance hints (HWP) for Intel P-state governor: +# performance, balance_performance, default, balance_power, power +# Values are given in order of increasing power saving. +# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required. +# Default: +CPU_HWP_ON_AC=balance_performance +CPU_HWP_ON_BAT=balance_power + +# Set Intel P-state performance: 0..100 (%). +# Limit the max/min P-state to control the power dissipation of the CPU. +# Values are stated as a percentage of the available performance. +# Requires an Intel Core i processor with intel_pstate driver. +# Default: +#CPU_MIN_PERF_ON_AC=0 +#CPU_MAX_PERF_ON_AC=100 +#CPU_MIN_PERF_ON_BAT=0 +#CPU_MAX_PERF_ON_BAT=30 + +# Set the CPU "turbo boost" feature: 0=disable, 1=allow +# Requires an Intel Core i processor. +# Important: +# - This may conflict with your distribution's governor settings +# - A value of 1 does *not* activate boosting, it just allows it +# Default: +#CPU_BOOST_ON_AC=1 +#CPU_BOOST_ON_BAT=0 + +# Minimize number of used CPU cores/hyper-threads under light load conditions: +# 0=disable, 1=enable. +# Default: +SCHED_POWERSAVE_ON_AC=0 +SCHED_POWERSAVE_ON_BAT=1 + +# Kernel NMI Watchdog: +# 0=disable (default, saves power), 1=enable (for kernel debugging only). +# Default: +NMI_WATCHDOG=0 + +# Change CPU voltages aka "undervolting" - Kernel with PHC patch required. +# Frequency voltage pairs are written to: +# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls +# CAUTION: only use this, if you thoroughly understand what you are doing! +# Default: . +#PHC_CONTROLS="F:V F:V F:V F:V" + +# Set CPU performance versus energy savings policy: +# performance, balance-performance, default, balance-power, power. +# Values are given in order of increasing power saving. +# Requires kernel module msr and x86_energy_perf_policy from linux-tools. +# Default: +ENERGY_PERF_POLICY_ON_AC=performance +ENERGY_PERF_POLICY_ON_BAT=balance-power + +# Disk devices; separate multiple devices with spaces. +# Devices can be specified by disk ID also (lookup with: tlp diskid). +# Note: DISK parameters below are effective only when this option is configured. +# Default: "nvme0n1 sda" +DISK_DEVICES="sda sdb" + +# Disk advanced power management level: 1..254, 255 (max saving, min, off). +# Levels 1..127 may spin down the disk; 255 allowable on most drives. +# Separate values for multiple disks with spaces. Use the special value 'keep' +# to keep the hardware default for the particular disk. +# Default: +DISK_APM_LEVEL_ON_AC="254 254" +DISK_APM_LEVEL_ON_BAT="128 128" + +# Hard disk spin down timeout: +# 0: spin down disabled +# 1..240: timeouts from 5s to 20min (in units of 5s) +# 241..251: timeouts from 30min to 5.5 hours (in units of 30min) +# See 'man hdparm' for details. +# Separate values for multiple disks with spaces. Use the special value 'keep' +# to keep the hardware default for the particular disk. +# Default: +#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0" +#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0" + +# Select I/O scheduler for the disk devices. +# Multi queue (blk-mq) schedulers: +# mq-deadline(*), none, kyber, bfq +# Single queue schedulers: +# deadline(*), cfq, bfq, noop +# (*) recommended. +# Separate values for multiple disks with spaces. Use the special value 'keep' +# to keep the kernel default scheduler for the particular disk. +# Notes: +# - Multi queue (blk-mq) may need kernel boot option 'scsi_mod.use_blk_mq=1' +# and 'modprobe mq-deadline-iosched|kyber|bfq' on kernels < 5.0 +# - Single queue schedulers are legacy now and were removed together with +# the old block layer in kernel 5.0 +# Default: keep +#DISK_IOSCHED="mq-deadline mq-deadline" + +# AHCI link power management (ALPM) for disk devices: +# min_power, med_power_with_dipm(*), medium_power, max_performance. +# (*) Kernel >= 4.15 required, then recommended. +# Multiple values separated with spaces are tried sequentially until success. +# Default: +SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance" +SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power" + +# Exclude host devices from AHCI link power management. +# Separate multiple hosts with spaces. +# Default: +#SATA_LINKPWR_BLACKLIST="host1" + +# Runtime Power Management for AHCI host and disks devices: +# on=disable, auto=enable. +# EXPERIMENTAL ** WARNING: auto may cause system lockups/data loss. +# Default: +#AHCI_RUNTIME_PM_ON_AC=on +#AHCI_RUNTIME_PM_ON_BAT=on + +# Seconds of inactivity before disk is suspended. +# Note: effective only when AHCI_RUNTIME_PM_ON_AC/BAT is activated. +# Default: 15 +AHCI_RUNTIME_PM_TIMEOUT=15 + +# PCI Express Active State Power Management (PCIe ASPM): +# default(*), performance, powersave. +# (*) keeps BIOS ASPM defaults (recommended) +# Default: +#PCIE_ASPM_ON_AC=default +#PCIE_ASPM_ON_BAT=default + +# Set the min/max/turbo frequency for the Intel GPU. +# Possible values depend on your hardware. For available frequencies see +# the output of tlp-stat -g. +# Default: +#INTEL_GPU_MIN_FREQ_ON_AC=0 +#INTEL_GPU_MIN_FREQ_ON_BAT=0 +#INTEL_GPU_MAX_FREQ_ON_AC=0 +#INTEL_GPU_MAX_FREQ_ON_BAT=0 +#INTEL_GPU_BOOST_FREQ_ON_AC=0 +#INTEL_GPU_BOOST_FREQ_ON_BAT=0 + +# Radeon graphics clock speed (profile method): low, mid, high, auto, default; +# auto = mid on BAT, high on AC. +# Default: default +RADEON_POWER_PROFILE_ON_AC=default +RADEON_POWER_PROFILE_ON_BAT=default + +# Radeon dynamic power management method (DPM): battery, performance. +# Default: +RADEON_DPM_STATE_ON_AC=performance +RADEON_DPM_STATE_ON_BAT=battery + +# Radeon DPM performance level: auto, low, high; auto is recommended. +# Note: effective only when RADEON_DPM_STATE_ON_AC/BAT is activated. +# Default: auto +RADEON_DPM_PERF_LEVEL_ON_AC=auto +RADEON_DPM_PERF_LEVEL_ON_BAT=auto + +# WiFi power saving mode: on=enable, off=disable; not supported by all adapters. +# Default: +WIFI_PWR_ON_AC=off +WIFI_PWR_ON_BAT=on + +# Disable wake on LAN: Y/N. +# Default: N +WOL_DISABLE=Y + +# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs). +# A value of 0 disables, >=1 enables power saving (recommended: 1). +# Default: +SOUND_POWER_SAVE_ON_AC=0 +SOUND_POWER_SAVE_ON_BAT=0 + +# Disable controller too (HDA only): Y/N. +# Note: effective only when SOUND_POWER_SAVE_ON_AC/BAT is activated. +# Default: Y +SOUND_POWER_SAVE_CONTROLLER=N + +# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable. +# Drive can be powered on again by releasing (and reinserting) the eject lever +# or by pressing the disc eject button on newer models. +# Note: an UltraBay/MediaBay hard disk is never powered off. +# Default: 0 +BAY_POWEROFF_ON_AC=0 +BAY_POWEROFF_ON_BAT=0 +# Optical drive device to power off +# Default: sr0 +BAY_DEVICE="sr0" + +# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable. +# Default: +RUNTIME_PM_ON_AC=on +RUNTIME_PM_ON_BAT=auto + +# Exclude PCI(e) device adresses the following list from Runtime PM +# (separate with spaces). Use lspci to get the adresses (1st column). +# Default: +#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6" + +# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM. +# Default when unconfigured is "amdgpu nouveau nvidia radeon" which +# prevents accidential power-on of dGPU in hybrid graphics setups. +# Separate multiple drivers with spaces. +# Default: "amdgpu mei_me nouveau nvidia pcieport radeon", use "" to disable +# completely. +#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu mei_me nouveau nvidia pcieport radeon" + +# Set to 0 to disable, 1 to enable USB autosuspend feature. +# Default: 0 +USB_AUTOSUSPEND=1 + +# Exclude listed devices from USB autosuspend (separate with spaces). +# Use lsusb to get the ids. +# Note: input devices (usbhid) are excluded automatically +# Default: +#USB_BLACKLIST="1111:2222 3333:4444" + +# Bluetooth devices are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude. +# Default: 0 +USB_BLACKLIST_BTUSB=0 + +# Phone devices are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude (enable charging). +# Default: 0 +USB_BLACKLIST_PHONE=0 + +# Printers are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude. +# Default: 1 +USB_BLACKLIST_PRINTER=1 + +# WWAN devices are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude. +# Default: 0 +USB_BLACKLIST_WWAN=0 + +# Include listed devices into USB autosuspend even if already excluded +# by the blacklists above (separate with spaces). Use lsusb to get the ids. +# Default: +#USB_WHITELIST="1111:2222 3333:4444" + +# Set to 1 to disable autosuspend before shutdown, 0 to do nothing +# (workaround for USB devices that cause shutdown problems). +# Default: 0 +#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1 + +# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown +# on system startup: 0=disable, 1=enable. +# Note: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below +# are ignored when this is enabled. +# Default: 0 +#RESTORE_DEVICE_STATE_ON_STARTUP=0 +RESTORE_DEVICE_STATE_ON_STARTUP=1 + +# Radio devices to disable on startup: bluetooth, wifi, wwan. +# Separate multiple devices with spaces. +# Default: +#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan" + +# Radio devices to enable on startup: bluetooth, wifi, wwan. +# Separate multiple devices with spaces. +# Default: +#DEVICES_TO_ENABLE_ON_STARTUP="wifi" + +# Radio devices to disable on shutdown: bluetooth, wifi, wwan. +# (workaround for devices that are blocking shutdown). +# Default: +#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan" + +# Radio devices to enable on shutdown: bluetooth, wifi, wwan. +# (to prevent other operating systems from missing radios). +# Default: +#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan" + +# Radio devices to enable on AC: bluetooth, wifi, wwan. +# Default: +#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan" + +# Radio devices to disable on battery: bluetooth, wifi, wwan. +# Default: +#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan" +DEVICES_TO_DISABLE_ON_BAT="bluetooth" + +# Radio devices to disable on battery when not in use (not connected): +# bluetooth, wifi, wwan. +# Default: +#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan" + +# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module +# required). Charging starts when the remaining capacity falls below the +# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value. +# Main / Internal battery (values in %) +# Default: +#START_CHARGE_THRESH_BAT0=75 +#STOP_CHARGE_THRESH_BAT0=80 +# Ultrabay / Slice / Replaceable battery (values in %) +# Default: +#START_CHARGE_THRESH_BAT1=75 +#STOP_CHARGE_THRESH_BAT1=80 + +# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable. +# Default: 0 +#RESTORE_THRESHOLDS_ON_BAT=1 + +# Battery feature drivers: 0=disable, 1=enable +# Default: 1 (all) +NATACPI_ENABLE=1 +TPACPI_ENABLE=1 +TPSMAPI_ENABLE=1 + +# ------------------------------------------------------------------------------ +# tlp-rdw - Parameters for the radio device wizard +# Possible devices: bluetooth, wifi, wwan. + +# Notes: +# - Parameters are disabled by default, remove the leading # to enable them +# - Separate multiple radio devices with spaces + +# Default: (for all parameters below) + +# Radio devices to disable on connect. +#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan" +#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan" +#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi" + +# Radio devices to enable on disconnect. +#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan" +#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT="" +#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT="" + +# Radio devices to enable/disable when docked. +#DEVICES_TO_ENABLE_ON_DOCK="" +#DEVICES_TO_DISABLE_ON_DOCK="" + +# Radio devices to enable/disable when undocked. +#DEVICES_TO_ENABLE_ON_UNDOCK="wifi" +#DEVICES_TO_DISABLE_ON_UNDOCK="" #+end_src +*** shemshak + +#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "shemshak")) "/sudo::/etc/default/tlp") +# ------------------------------------------------------------------------------ +# tlp - Parameters for power saving +# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html + +# Hint: some features are disabled by default, remove the leading # to enable +# them. + +# Set to 0 to disable, 1 to enable TLP. +TLP_ENABLE=1 + +# Operation mode when no power supply can be detected: AC, BAT. +# Concerns some desktop and embedded hardware only. +TLP_DEFAULT_MODE=AC + +# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE +# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC. +TLP_PERSISTENT_DEFAULT=0 + +# Seconds laptop mode has to wait after the disk goes idle before doing a sync. +# Non-zero value enables, zero disables laptop mode. +DISK_IDLE_SECS_ON_AC=0 +DISK_IDLE_SECS_ON_BAT=2 + +# Dirty page values (timeouts in secs). +MAX_LOST_WORK_SECS_ON_AC=15 +MAX_LOST_WORK_SECS_ON_BAT=60 + +# Hint: CPU parameters below are disabled by default, remove the leading # +# to enable them, otherwise kernel default values are used. + +# Select a CPU frequency scaling governor. +# Intel Core i processor with intel_pstate driver: +# powersave(*), performance. +# Older hardware with acpi-cpufreq driver: +# ondemand(*), powersave, performance, conservative, schedutil. +# (*) is recommended. +# Hint: use tlp-stat -p to show the active driver and available governors. +# Important: +# powersave for intel_pstate and ondemand for acpi-cpufreq are power +# efficient for *almost all* workloads and therefore kernel and most +# distributions have chosen them as defaults. If you still want to change, +# you should know what you're doing! You *must* disable your distribution's +# governor settings or conflicts will occur. +#CPU_SCALING_GOVERNOR_ON_AC=powersave +#CPU_SCALING_GOVERNOR_ON_BAT=powersave + +# Set the min/max frequency available for the scaling governor. +# Possible values strongly depend on your CPU. For available frequencies see +# the output of tlp-stat -p. +#CPU_SCALING_MIN_FREQ_ON_AC=0 +#CPU_SCALING_MAX_FREQ_ON_AC=0 +#CPU_SCALING_MIN_FREQ_ON_BAT=0 +#CPU_SCALING_MAX_FREQ_ON_BAT=0 + +# Set energy performance hints (HWP) for Intel P-state governor: +# performance, balance_performance, default, balance_power, power +# Values are given in order of increasing power saving. +# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required. +CPU_HWP_ON_AC=balance_performance +CPU_HWP_ON_BAT=balance_power + +# Set Intel P-state performance: 0..100 (%). +# Limit the max/min P-state to control the power dissipation of the CPU. +# Values are stated as a percentage of the available performance. +# Requires an Intel Core i processor with intel_pstate driver. +#CPU_MIN_PERF_ON_AC=0 +#CPU_MAX_PERF_ON_AC=100 +#CPU_MIN_PERF_ON_BAT=0 +#CPU_MAX_PERF_ON_BAT=30 + +# Set the CPU "turbo boost" feature: 0=disable, 1=allow +# Requires an Intel Core i processor. +# Important: +# - This may conflict with your distribution's governor settings +# - A value of 1 does *not* activate boosting, it just allows it +#CPU_BOOST_ON_AC=1 +#CPU_BOOST_ON_BAT=0 + +# Minimize number of used CPU cores/hyper-threads under light load conditions: +# 0=disable, 1=enable. +SCHED_POWERSAVE_ON_AC=0 +SCHED_POWERSAVE_ON_BAT=1 + +# Kernel NMI Watchdog: +# 0=disable (default, saves power), 1=enable (for kernel debugging only). +NMI_WATCHDOG=0 + +# Change CPU voltages aka "undervolting" - Kernel with PHC patch required. +# Frequency voltage pairs are written to: +# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls +# CAUTION: only use this, if you thoroughly understand what you are doing! +#PHC_CONTROLS="F:V F:V F:V F:V" + +# Set CPU performance versus energy savings policy: +# performance, balance-performance, default, balance-power, power. +# Values are given in order of increasing power saving. +# Requires kernel module msr and x86_energy_perf_policy from linux-tools. +ENERGY_PERF_POLICY_ON_AC=performance +ENERGY_PERF_POLICY_ON_BAT=balance-power + +# Disk devices; separate multiple devices with spaces (default: sda). +# Devices can be specified by disk ID also (lookup with: tlp diskid). +DISK_DEVICES="sda sdb" + +# Disk advanced power management level: 1..254, 255 (max saving, min, off). +# Levels 1..127 may spin down the disk; 255 allowable on most drives. +# Separate values for multiple disks with spaces. Use the special value 'keep' +# to keep the hardware default for the particular disk. +DISK_APM_LEVEL_ON_AC="254 254" +DISK_APM_LEVEL_ON_BAT="128 128" + +# Hard disk spin down timeout: +# 0: spin down disabled +# 1..240: timeouts from 5s to 20min (in units of 5s) +# 241..251: timeouts from 30min to 5.5 hours (in units of 30min) +# See 'man hdparm' for details. +# Separate values for multiple disks with spaces. Use the special value 'keep' +# to keep the hardware default for the particular disk. +#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0" +#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0" + +# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq). +# Separate values for multiple disks with spaces. Use the special value 'keep' +# to keep the kernel default scheduler for the particular disk. +#DISK_IOSCHED="cfq cfq" + +# AHCI link power management (ALPM) for disk devices: +# min_power, med_power_with_dipm(*), medium_power, max_performance. +# (*) Kernel >= 4.15 required, then recommended. +# Multiple values separated with spaces are tried sequentially until success. +SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance" +SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power" + +# Exclude host devices from AHCI link power management. +# Separate multiple hosts with spaces. +#SATA_LINKPWR_BLACKLIST="host1" + +# Runtime Power Management for AHCI host and disks devices: +# on=disable, auto=enable. +# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss. +#AHCI_RUNTIME_PM_ON_AC=on +#AHCI_RUNTIME_PM_ON_BAT=on + +# Seconds of inactivity before disk is suspended. +AHCI_RUNTIME_PM_TIMEOUT=15 + +# PCI Express Active State Power Management (PCIe ASPM): +# default, performance, powersave. +PCIE_ASPM_ON_AC=performance +PCIE_ASPM_ON_BAT=powersave + +# Radeon graphics clock speed (profile method): low, mid, high, auto, default; +# auto = mid on BAT, high on AC; default = use hardware defaults. +RADEON_POWER_PROFILE_ON_AC=high +RADEON_POWER_PROFILE_ON_BAT=low + +# Radeon dynamic power management method (DPM): battery, performance. +RADEON_DPM_STATE_ON_AC=performance +RADEON_DPM_STATE_ON_BAT=battery + +# Radeon DPM performance level: auto, low, high; auto is recommended. +RADEON_DPM_PERF_LEVEL_ON_AC=auto +RADEON_DPM_PERF_LEVEL_ON_BAT=auto + +# WiFi power saving mode: on=enable, off=disable; not supported by all adapters. +WIFI_PWR_ON_AC=off +WIFI_PWR_ON_BAT=on + +# Disable wake on LAN: Y/N. +WOL_DISABLE=Y + +# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs). +# A value of 0 disables, >=1 enables power saving (recommended: 1). +SOUND_POWER_SAVE_ON_AC=0 +SOUND_POWER_SAVE_ON_BAT=0 + +# Disable controller too (HDA only): Y/N. +SOUND_POWER_SAVE_CONTROLLER=N + +# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable. +# Drive can be powered on again by releasing (and reinserting) the eject lever +# or by pressing the disc eject button on newer models. +# Note: an UltraBay/MediaBay hard disk is never powered off. +BAY_POWEROFF_ON_AC=0 +BAY_POWEROFF_ON_BAT=0 +# Optical drive device to power off (default sr0). +BAY_DEVICE="sr0" + +# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable. +RUNTIME_PM_ON_AC=on +RUNTIME_PM_ON_BAT=auto + +# Exclude PCI(e) device adresses the following list from Runtime PM +# (separate with spaces). Use lspci to get the adresses (1st column). +#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6" +RUNTIME_PM_BLACKLIST="01:00.0" + +# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM. +# Default when unconfigured is "amdgpu nouveau nvidia radeon" which +# prevents accidential power-on of dGPU in hybrid graphics setups. +# Use "" to disable the feature completely. +# Separate multiple drivers with spaces. +#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon" + +# Set to 0 to disable, 1 to enable USB autosuspend feature. +USB_AUTOSUSPEND=1 + +# Exclude listed devices from USB autosuspend (separate with spaces). +# Use lsusb to get the ids. +# Note: input devices (usbhid) are excluded automatically +#USB_BLACKLIST="1111:2222 3333:4444" + +# Bluetooth devices are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude. +USB_BLACKLIST_BTUSB=0 + +# Phone devices are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude (enable charging). +USB_BLACKLIST_PHONE=0 + +# Printers are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude. +USB_BLACKLIST_PRINTER=1 + +# WWAN devices are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude. +USB_BLACKLIST_WWAN=1 + +# Include listed devices into USB autosuspend even if already excluded +# by the blacklists above (separate with spaces). +# Use lsusb to get the ids. +#USB_WHITELIST="1111:2222 3333:4444" + +# Set to 1 to disable autosuspend before shutdown, 0 to do nothing +# (workaround for USB devices that cause shutdown problems). +#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1 + +# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown +# on system startup: 0=disable, 1=enable. +# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below +# are ignored when this is enabled! +#RESTORE_DEVICE_STATE_ON_STARTUP=0 +RESTORE_DEVICE_STATE_ON_STARTUP=1 + +# Radio devices to disable on startup: bluetooth, wifi, wwan. +# Separate multiple devices with spaces. +#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan" + +# Radio devices to enable on startup: bluetooth, wifi, wwan. +# Separate multiple devices with spaces. +#DEVICES_TO_ENABLE_ON_STARTUP="wifi" + +# Radio devices to disable on shutdown: bluetooth, wifi, wwan. +# (workaround for devices that are blocking shutdown). +#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan" + +# Radio devices to enable on shutdown: bluetooth, wifi, wwan. +# (to prevent other operating systems from missing radios). +#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan" + +# Radio devices to enable on AC: bluetooth, wifi, wwan. +#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan" + +# Radio devices to disable on battery: bluetooth, wifi, wwan. +#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan" + +# Radio devices to disable on battery when not in use (not connected): +# bluetooth, wifi, wwan. +#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan" + +# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module +# required). Charging starts when the remaining capacity falls below the +# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value. +# Main / Internal battery (values in %) +#START_CHARGE_THRESH_BAT0=75 +#STOP_CHARGE_THRESH_BAT0=80 +# Ultrabay / Slice / Replaceable battery (values in %) +#START_CHARGE_THRESH_BAT1=75 +#STOP_CHARGE_THRESH_BAT1=80 + +# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable. +#RESTORE_THRESHOLDS_ON_BAT=1 + +# ------------------------------------------------------------------------------ +# tlp-rdw - Parameters for the radio device wizard +# Possible devices: bluetooth, wifi, wwan. + +# Hints: +# - Parameters are disabled by default, remove the leading # to enable them +# - Separate multiple radio devices with spaces + +# Radio devices to disable on connect. +#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan" +#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan" +#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi" + +# Radio devices to enable on disconnect. +#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan" +#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT="" +#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT="" + +# Radio devices to enable/disable when docked. +#DEVICES_TO_ENABLE_ON_DOCK="" +#DEVICES_TO_DISABLE_ON_DOCK="" + +# Radio devices to enable/disable when undocked. +#DEVICES_TO_ENABLE_ON_UNDOCK="wifi" +#DEVICES_TO_DISABLE_ON_UNDOCK="" +#+end_src + +** X + +*** xprofile +:PROPERTIES: +:header-args+: :tangle ~/.xprofile +:END: + +=~/.xprofile= is similar in style to =~/.xinitrc=, but on the +contrary, it's automatically sourced by LightDM, my display manager of +choice. + +#+begin_src sh :tangle no +xset -b # disable bell +xset r rate 200 45 # repeat delay (ms) and rate (repeats/sec) + +# setxkbmap -option compose:ralt + +setxkbmap -option ctrl:nocaps # turn capslock into control +setxkbmap -option altwin:swap_alt_win # swap alt and super + +if [ $(hostname) = "plasma" ] +then + setxkbmap -option ctrl:rctrl_ralt # turn right control into right alt +fi + +if [ $(hostname) = "enigma" ] +then + xmodmap -e "keycode 135 = Alt_R" # remap menu key to alt +fi + +light -Scrs "intel_backlight" 2 + +source $HOME/.zprofile + +export _JAVA_AWT_WM_NONREPARENTING=1 +export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true' + +if [ $(hostname) = "plasma" ] +then + unlock-def-gk.py & +fi + +bspwm & +#+end_src + +*** X resources + +**** Xresources +:PROPERTIES: +:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources") +:END: + +#+begin_src conf-xdefaults +#include ".Xresources.d/fonts" +! #include ".Xresources.d/colors" +#include ".Xresources.d/emacs" +#include ".Xresources.d/rxvt-unicode" +#+end_src + +**** Xresources.d + +***** fonts +:PROPERTIES: +:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts") +:END: + +#+begin_src conf-xdefaults +Xft.lcdfilter: lcddefault +Xft.antialias: true +Xft.autohint: 0 +Xft.hinting: true +Xft.hintstyle: hintslight +! Xft.hintstyle: hintfull +Xft.rgba: rgb +Xft.dpi: 96 +#+end_src + +***** colors +:PROPERTIES: +:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors") +:END: + +#+begin_src conf-xdefaults :tangle no +#include "gruvbox-light.xresources" +! #include "gruvbox-dark.xresources" +#include "gruvbox-urxvt256.xresources" +#+end_src + +#+begin_src conf-xdefaults :tangle no +! ----------------------------------------------------------------------------- +! File: gruvbox-light.xresources +! Description: Retro groove colorscheme generalized +! Author: morhetz +! Source: https://github.com/morhetz/gruvbox-generalized +! Last Modified: 6 Sep 2014 +! ----------------------------------------------------------------------------- + +! hard contrast: *background: #f9f5d7 +*background: #fbf1c7 +! soft contrast: *background: #f2e5bc +*foreground: #3c3836 +! Black + DarkGrey +*color0: #fdf4c1 +*color8: #928374 +! DarkRed + Red +*color1: #cc241d +*color9: #9d0006 +! DarkGreen + Green +*color2: #98971a +*color10: #79740e +! DarkYellow + Yellow +*color3: #d79921 +*color11: #b57614 +! DarkBlue + Blue +*color4: #458588 +*color12: #076678 +! DarkMagenta + Magenta +*color5: #b16286 +*color13: #8f3f71 +! DarkCyan + Cyan +*color6: #689d6a +*color14: #427b58 +! LightGrey + White +*color7: #7c6f64 +*color15: #3c3836 +#+end_src + +#+begin_src conf-xdefaults :tangle no +! ----------------------------------------------------------------------------- +! File: gruvbox-dark.xresources +! Description: Retro groove colorscheme generalized +! Author: morhetz +! Source: https://github.com/morhetz/gruvbox-generalized +! Last Modified: 6 Sep 2014 +! ----------------------------------------------------------------------------- + +! hard contrast: *background: #1d2021 +*background: #282828 +! soft contrast: *background: #32302f +*foreground: #ebdbb2 +! Black + DarkGrey +*color0: #282828 +*color8: #928374 +! DarkRed + Red +*color1: #cc241d +*color9: #fb4934 +! DarkGreen + Green +*color2: #98971a +*color10: #b8bb26 +! DarkYellow + Yellow +*color3: #d79921 +*color11: #fabd2f +! DarkBlue + Blue +*color4: #458588 +*color12: #83a598 +! DarkMagenta + Magenta +*color5: #b16286 +*color13: #d3869b +! DarkCyan + Cyan +*color6: #689d6a +*color14: #8ec07c +! LightGrey + White +*color7: #a89984 +*color15: #ebdbb2 +#+end_src + +#+begin_src conf-xdefaults :tangle no +! ----------------------------------------------------------------------------- +! File: gruvbox-urxvt256.xresources +! Description: Retro groove colorscheme generalized +! Author: morhetz +! Source: https://github.com/morhetz/gruvbox-generalized +! Last Modified: 13 Dec 2013 +! ----------------------------------------------------------------------------- + +URxvt.color24: #076678 +URxvt.color66: #427b58 +URxvt.color88: #9d0006 +URxvt.color96: #8f3f71 +URxvt.color100: #79740e +URxvt.color108: #8ec07c +URxvt.color109: #83a598 +URxvt.color130: #af3a03 +URxvt.color136: #b57614 +URxvt.color142: #b8bb26 +URxvt.color167: #fb4934 +URxvt.color175: #d3869b +URxvt.color208: #fe8019 +URxvt.color214: #fabd2f +URxvt.color223: #ebdbb2 +URxvt.color228: #f2e5bc +URxvt.color229: #fbf1c7 +URxvt.color230: #f9f5d7 +URxvt.color234: #1d2021 +URxvt.color235: #282828 +URxvt.color236: #32302f +URxvt.color237: #3c3836 +URxvt.color239: #504945 +URxvt.color241: #665c54 +URxvt.color243: #7c6f64 +URxvt.color244: #928374 +URxvt.color245: #928374 +URxvt.color246: #a89984 +URxvt.color248: #bdae93 +URxvt.color250: #d5c4a1 +#+end_src + +***** emacs +:PROPERTIES: +:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs") +:END: + +#+begin_src conf-xdefaults +Emacs.menuBar: off +Emacs.toolBar: off +Emacs.verticalScrollBars: off +Emacs.cursorBlink: off +Emacs.FontBackend: xft,x +! Emacs.font: Ubuntu Mono-12 +! Emacs.font: Triplicate T4C-11 +! Emacs.font: Ubuntu Mono-10.5 +! Emacs.font: Ubuntu Mono-12 +! Emacs.font: Iosevka-11 + +! Emacs.font: Fira Mono:size=15 +! Emacs.font: DejaVu Sans Mono:size=15 +! Emacs.font: Inconsolata:size=17 +! Emacs.font: Inconsolata:size=16 +! Emacs.font: Inconsolata LGC:size=14 +! Emacs.font: Source Code Pro Medium-10.5 +Emacs.font: Source Code Pro:size=14 +! Emacs.font: Ubuntu Mono:size=16 +! Emacs.font: Iosevka:size=16 +#+end_src + +***** rxvt-unicode +:PROPERTIES: +:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode") +:END: + +#+begin_src conf-xdefaults +! Font +URxvt.font: xft:source code pro:pixelsize=14:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true +URxvt.boldFont: xft:source code pro:semibold:pixelsize=14:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold +URxvt.italicFont: xft:source code pro:italic:pixelsize=14:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic +URxvt.bolditalicFont: xft:source code pro:semibold:italic:pixelsize=14:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic + +URxvt.xftAntialias: true +URxvt.letterSpace: 0 + +URxvt.depth: 0 +URxvt.loginShell: true +URxvt.saveLines: 100000 +URxvt.internalBorder: 3 +URxvt.lineSpace: 0 +URxvt.scrollBar: false +URxvt.scrollStyle: rxvt +URxvt*scrollTtyOutput: false +URxvt*scrollWithBuffer: true +URxvt*scrollTtyKeypress: true +URxvt.keysym.Shift-Up: command:\033]720;1\007 +URxvt.keysym.Shift-Down: command:\033]721;1\007 + +URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select +URxvt.url-select.launcher: firefox +URxvt.url-select.underline: true +URxvt.keysym.M-u: perl:url-select:select_next +URxvt.keysym.M-Escape: perl:keyboard-select:activate +URxvt.keysym.M-s: perl:keyboard-select:search +URxvt.url-launcher: /usr/bin/firefox +URxvt.matcher.button: 1 +URxvt.iso14755: false +URxvt.iso14755_53: false +URxvt.keysym.M-c: perl:clipboard:copy +URxvt.keysym.M-v: perl:clipboard:paste +URxvt.keysym.C-A-V: perl:clipboard:paste_escaped +URxvt.keysym.C-Up: font-size:increase +URxvt.keysym.C-Down: font-size:decrease +URxvt.keysym.C-S-Up: font-size:incglobal +URxvt.keysym.C-S-Down: font-size:decglobal +URxvt.keysym.C-equal: font-size:reset +!URxvt.keysym.C-question: font-size:show + +URxvt.iconFile: /usr/share/icons/Paper/48x48/apps/utilities-terminal.png + +!urxvt*foreground: white +!urxvt*background: black + +!*color0: #2E3436 +!*color1: #a40000 +!*color2: #4E9A06 +!*color3: #C4A000 +!*color4: #3465A4 +!*color5: #75507B +!*color6: #ce5c00 +!*color7: #babdb9 +!*color8: #555753 +!*color9: #EF2929 +!*color10: #8AE234 +!*color11: #FCE94F +!*color12: #729FCF +!*color13: #AD7FA8 +!*color14: #fcaf3e +!*color15: #EEEEEC + +!URxvt.foreground: #C8C8C8 +!URxvt.background: #FFFFFF + +!! black +!*color0: #2E3436 +!*color8: #555753 +!! red +!*color1: #a40000 +!*color9: #EF2929 +!! green +!*color2: #4E9A06 +!*color10: #8AE234 +!! yellow +!*color3: #C4A000 +!*color11: #FCE94F +!! blue +!*color4: #3465A4 +!*color12: #729FCF +!! purple +!*color5: #75507B +!*color13: #AD7FA8 +!! orange (replaces cyan) +!*color6: #ce5c00 +!*color14: #fcaf3e +!! white +!*color7: #babdb9 +!*color15: #EEEEEC + +! Tango colour theme for rxvt-unicode +URxvt.background: #FFFFFF +URxvt.foreground: #000000 + +! Black +URxvt.color0: #2E3436 +URxvt.color8: #757773 + +! Red +URxvt.color1: #CC0000 +URxvt.color9: #EF2929 + +! Green +URxvt.color2: #4E9A06 +URxvt.color10: #8AE234 + +! Yellow +URxvt.color3: #C4A000 +URxvt.color11: #FCE94F + +! Blue +URxvt.color4: #3465A4 +URxvt.color12: #729FCF + +! Magenta +URxvt.color5: #75507B +URxvt.color13: #AD7FA8 + +!! Cyan +!URxvt.color6: #06989A +!URxvt.color14: #34E2E2 +! orange (replaces cyan) +,*color6: #ce5c00 +,*color14: #fcaf3e + +! White +URxvt.color7: #D3D7CF +URxvt.color15: #EEEEEC +#+end_src + +*** xkb us_ab keyboard layout + +#+begin_src conf :tangle "/sudo::/usr/share/X11/xkb/symbols/us_ab" :comments none +default partial alphanumeric_keys +xkb_symbols "us_ab" { + include "us(basic)" + name[Group1]= "English (US)(aminb)"; + + key { [ Alt_R ] }; +}; +#+end_src + +** XDG +:PROPERTIES: +:header-args+: :tangle ~/.config/user-dirs.dirs +:END: + +#+begin_src conf +XDG_DESKTOP_DIR="$HOME/Desktop" +XDG_DOCUMENTS_DIR="$HOME/usr/docs" +XDG_DOWNLOAD_DIR="$HOME/usr/dls" +XDG_MUSIC_DIR="$HOME/usr/music" +XDG_PICTURES_DIR="$HOME/usr/pics" +XDG_PUBLICSHARE_DIR="$HOME/usr/Public" +XDG_TEMPLATES_DIR="$HOME/usr/Templates" +XDG_VIDEOS_DIR="$HOME/usr/vids" +#+end_src + +** Zathura +:PROPERTIES: +:header-args+: :tangle ~/.config/zathura/zathurarc +:END: + +#+begin_src conf +set smooth-scroll true +set selection-clipboard clipboard +set zoom-step 05 +set default-bg "#272727" +set statusbar-bg "#272727" +set inputbar-bg "#373737" +#+end_src + +** Zsh + +My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]], +[[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them +installed. + +*** zimrc +:PROPERTIES: +:header-args+: :tangle ~/.zimrc +:END: + +#+begin_src sh +################# +# CORE SETTINGS # +################# + +# +# Zim settings +# + +# Select what modules you would like enabled. +# The second line of modules may depend on options set by modules in the first +# line. These dependencies are noted on the respective module's README.md. +zmodules=(directory environment git git-info history input ssh utility custom \ + syntax-highlighting history-substring-search prompt completion) + + +################### +# MODULE SETTINGS # +################### + +# +# Prompt +# + +# Set your desired prompt here +zprompt_theme='pure' +#PURE_PROMPT_SYMBOL=λ +#PURE_PROMPT_SYMBOL=δ +PURE_PROMPT_SYMBOL=➜ + +# +# Completion +# + +# set an optional host-specific filename for the completion cache file +# if none is provided, the default '.zcompdump' is used. +#zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}" + +# +# Utility +# + +# Uncomment to enable command correction prompts +# See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput +setopt CORRECT + +# +# Environment +# + +# Set the string below to the desired terminal title format string. +# The terminal title is redrawn upon directory change, however, variables like +# ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data: +# http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes +# The example below uses the following format: 'username@host:/current/directory' +ztermtitle='%n@%m:%~' + +# +# Input +# + +# Uncomment to enable double-dot expansion. +# This appends '../' to your input for each '.' you type after an initial '..' +#zdouble_dot_expand='true' + +# +# Syntax-Highlighting +# + +# This determines what highlighters will be used with the syntax-highlighting module. +# Documentation of the highlighters can be found here: +# https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md +# For (u)rxvt, termite and gnome-terminal users, +# removing the 'cursor' highlighter will fix the disappearing cursor problem +#zhighlighters=(main brackets cursor) +zhighlighters=(main brackets pattern) + +# +# SSH +# + +# Load these ssh identities with the ssh module +zssh_ids=(id_ed25519_bandali) + +# +# Pacman +# + +# Set (optional) pacman front-end. +zpacman_frontend='yay' + +# Load any helper scripts as defined here +#zpacman_helper=(aur) + + +#+end_src + +*** zlogin +:PROPERTIES: +:header-args+: :tangle ~/.zlogin +:END: + +#+begin_src sh +# +# User configuration sourced by login shells +# + +# Initialize zim +[[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh + +#+end_src + +*** zprofile +:PROPERTIES: +:header-args+: :tangle ~/.zprofile +:END: + +#+begin_src sh +#PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH" +#PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH +export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH +export XDG_CONFIG_HOME=$HOME/.config +export XDG_DATA_HOME=$HOME/.local/share +export XDG_DATA_DIRS=/usr/local/share:/usr/share +export MAILDIR="$HOME/mail" +export CVS_RSH=ssh +#export MATHMODELS=$HOME/src/eiffel/mathmodels +#export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src +#export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/ + +# Eiffel2Java stuff +#export JAVA_HOME=/usr/lib/jvm/default +#export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux" +#export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server" +#export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server" + +#export PATH="$HOME/usr/build/pvs:$PATH" +#export SBCLISP_HOME=/usr/share/sbcl-source +#export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib" + +export MOZ_USE_XINPUT2=1 # precise scrolling in firefox + +#export JAVA_HOME=/usr/lib/jvm/java-8-openjdk +#export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G" + +export NIXPKGS=$HOME/src/git/nixpkgs + +if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer + +export GUIX_LOCPATH="$HOME/.guix-profile/lib/locale" +export PATH="/$HOME/.config/guix/current/bin${PATH:+:}$PATH" +export SSL_CERT_DIR="$HOME/.guix-profile/etc/ssl/certs" +export SSL_CERT_FILE="$HOME/.guix-profile/etc/ssl/certs/ca-certificates.crt" +export GIT_SSL_CAINFO="$SSL_CERT_FILE" +#+end_src + +*** zshenv +:PROPERTIES: +:header-args+: :tangle ~/.zshenv +:END: + +#+begin_src sh +# Ensure that a non-login, non-interactive shell has a defined environment. +if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then + source "${ZDOTDIR:-$HOME}/.zprofile" +fi +#+end_src + +*** zshrc +:PROPERTIES: +:header-args+: :tangle ~/.zshrc +:END: + +#+begin_src sh +# Bash-like navigation +#export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>' +#export WORDCHARS='*?-[]~=&;!#$%^(){}<>' +export WORDCHARS='*?[]~=&;!#$%^(){}<>' +#ZLE_SPACE_SUFFIX_CHARS=$'|&' + +#disable -r time # disable shell reserved word +#alias time='time -p' # -p for POSIX output + +# rehash if last command was pacaur or pacman +# (so that zsh picks up changes in $PATH immediately) +TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh } + +# +# User configuration sourced by interactive shells +# + +# Define zim location +export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim + +# Start zim +[[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh + +ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red') +#ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold' + +setopt globdots + +source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh +# source ~/.zsh/zsh-autopair/autopair.zsh + + +### fzf ### + +source /usr/share/fzf/key-bindings.zsh +source /usr/share/fzf/completion.zsh + +# Accept history selection instead of putting it on +# the command line +fzf-history-widget-accept() { + fzf-history-widget + zle accept-line +} +#zle -N fzf-history-widget-accept +#bindkey '^R' fzf-history-widget-accept + +# alt+c preview +export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'" + +### fzf ### + + +# aliases +alias mpv="mpv --ytdl-format mp4" +alias mv="mv -iv" +alias cp="cp -iv" +alias scl=systemctl +alias jcl=journalctl +alias m="mbsync csclub; mbsync uwaterloo; mbsync amin" +alias best="youtube-dl -f best" +alias sd="ssh deb" +alias sf="ssh fp" +alias sn="ssh nix" + +aur() { + cd ~/usr/build + git clone https://aur.archlinux.org/${1}.git + cd ${1} +} + +# i-beam cursor +echo -e "\033[5 q" +#echo -e "\033[6 q" + +#+end_src + +* Scripts + +This section contains various useful scripts and the ones used by the +programs above. For instance, =toggle-tablet= for switching to and +from tablet mode on my X220T, =toggle-presentation-mode= for toggling +Xfce's presentation mode which keeps the screen awake, and +=rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an +exact brightness value. + +** battery-percentage-time +:PROPERTIES: +:header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/sh" +:END: + +#+begin_src sh :tangle no +dbus_send() { + label=$1 + dbus-send --print-reply=literal --system \ + --dest=org.freedesktop.UPower \ + /org/freedesktop/UPower/devices/battery_BAT0 \ + org.freedesktop.DBus.Properties.Get \ + string:org.freedesktop.UPower.Device \ + string:"${label}" | awk '{print $3}' +} + +perc=$(dbus_send 'Percentage') +state=$(dbus_send 'State') + +if [ "$state" -eq 2 ]; then # Discharging + secs=$(dbus_send 'TimeToEmpty') +elif [ "$state" -eq 1 ]; then # Charging + secs=$(dbus_send 'TimeToFull') +fi + +printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60)) +#+end_src + +** my-i3status.py +:PROPERTIES: +:header-args+: :tangle ~/.local/bin/my-i3status.py :shebang "#!/usr/bin/env python2" +:END: + +#+begin_src python :comments none +# -*- coding: utf-8 -*- + +# This script is a simple wrapper which prefixes each i3status line with custom +# information. It is based on: +# https://github.com/i3/i3status/blob/master/contrib/wrapper.py +# +# In ~/.i3status.conf, add the following line: +# output_format = "i3bar" +# in the 'general' section. +# Then, in ~/.config/i3/config or ~/.config/sway/config add: +# status_command i3status | my-i3status.py +# in the 'bar' section. Make sure my-i3status.py is in $PATH. +# +# © 2012 Valentin Haenel +# © 2018 Amin Bandali +# +# This program is free software. It comes without any warranty, to the extent +# permitted by applicable law. You can redistribute it and/or modify it under +# the terms of the Do What The Fuck You Want To Public License (WTFPL), Version +# 2, as published by Sam Hocevar. See http://sam.zoy.org/wtfpl/COPYING for more +# details. + +import sys +import json +import os + +def get_nosleep(): + """ Return true if ~/.nosleep exists. """ + return os.path.isfile(os.path.expanduser("~/.nosleep")) + +def print_line(message): + """ Non-buffered printing to stdout. """ + sys.stdout.write(message + '\n') + sys.stdout.flush() + +def read_line(): + """ Interrupted respecting reader for stdin. """ + # try reading a line, removing any extra whitespace + try: + line = sys.stdin.readline().strip() + # i3status sends EOF, or an empty line + if not line: + sys.exit(3) + return line + # exit on ctrl-c + except KeyboardInterrupt: + sys.exit() + +if __name__ == '__main__': + # Skip the first line which contains the version header. + print_line(read_line()) + + # The second line contains the start of the infinite array. + print_line(read_line()) + + while True: + line, prefix = read_line(), '' + # ignore comma at start of lines + if line.startswith(','): + line, prefix = line[1:], ',' + + if get_nosleep(): + j = json.loads(line) + # insert information into the start of the json, but could be anywhere + j.insert(0, {'full_text' : '•', 'name' : 'nosleep'}) + # and echo back new encoded json + print_line(prefix+json.dumps(j)) + else: + print_line(prefix+line) +#+end_src + +** rofi-light +:PROPERTIES: +:header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash" +:END: + +#+begin_src bash +cur=$(light -G) +val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 12) +[ -n "$val" ] && light -S $val +#+end_src + +** rofi-remmina.py +:PROPERTIES: +:header-args+: :tangle ~/.local/bin/rofi-remmina.py :shebang "#!/usr/bin/env python2" +:END: + +#+begin_src python +import ConfigParser +import os +from subprocess import Popen, PIPE + +remmina_dir = os.path.expanduser("~/.local/share/remmina") + +fdict = dict() + +for f in os.listdir(remmina_dir): + fp = os.path.join(remmina_dir, f) + c = ConfigParser.ConfigParser() + c.read(fp) + n = c.get('remmina', 'name') + fdict[n] = fp + +lines = max(min(15, len(fdict)), 1); +width = len(max(fdict.keys(), key=len)) +rofi = Popen(["rofi", "-i", "-dmenu", \ + "-l", str(lines), "-width", str(width), \ + "-p", "connection"], stdout=PIPE, stdin=PIPE) +selected = rofi.communicate("\n" \ + .join(fdict.keys()) \ + .encode("utf-8"))[0] \ + .decode("utf-8") \ + .strip() +rofi.wait() + +r = Popen(["remmina", "-c", fdict[selected]]) +r.wait() +#+end_src + +** s (run sway) +:PROPERTIES: +:header-args+: :tangle ~/.local/bin/s :shebang "#!/bin/bash" +:END: + +#+begin_src bash +export _JAVA_AWT_WM_NONREPARENTING=1 +export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true' +light -Nr 2 +source $HOME/.zprofile +sway +#+end_src + +** sway-ws-util +:PROPERTIES: +:header-args+: :tangle ~/.local/bin/sway-ws-util :shebang "#!/bin/bash" +:END: + +#+begin_src bash +curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name') +[[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1)) +[[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1)) +dest_ws=-1 +op=-1 + +if [ "$1" = "switch" ] || [ "$1" = "move" ]; then + op="$1" + if [ "$2" = "prev" ]; then + dest_ws="$prev_ws" + elif [ "$2" = "next" ]; then + dest_ws="$next_ws" + else + echo "Usage: $0 $1 {prev|next} [follow]" + exit 1 + fi +else + echo "Usage: $0 {switch|move} {prev|next} [follow]" + exit 1 +fi + +if [ "$op" = "switch" ]; then + sway workspace "$dest_ws" +elif [ "$op" = "move" ]; then + sway move container to workspace "$dest_ws" + if [ "$3" = "follow" ]; then + sway workspace "$dest_ws" + fi +fi +#+end_src + +** toggle-layout +:PROPERTIES: +:header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash" +:END: + +#+begin_src bash :tangle no +lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)" + +if [ "$lang" = "us" ]; then + setxkbmap ir +else + setxkbmap us + # xmodmap $HOME/.Xmodmap +fi +#+end_src + +** toggle-presentation-mode +:PROPERTIES: +:header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash" +:END: + +#+begin_src bash :tangle no +xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T +#+end_src + +** toggle-tablet +:PROPERTIES: +:header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash" +:END: + +This script toggles between a 'normal' mode and a 'tablet' mode, doing +a few things: + +- rotates the screen using =xrandr=, so that rotating the physical + display of my X220t would have the laptop's battery on the right + hand side, +- enables touch screen, +- properly rotates the stylus pen and touch screen pointers, and +- toggles between RGB and Vertical BGR sub-pixel order. + +#+begin_src bash :tangle no +case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in + 0) # Screen is not rotated, we should rotate it right (90°) + xrandr -o 3 + xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1 + xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1 + xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1 + xfconf-query -c xsettings -p /Xft/RGBA -s vbgr + ;; + 1) # Currently top is rotated right, we should set it normal (0°) + xrandr -o 0 + xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0 + xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0 + xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0 + xfconf-query -c xsettings -p /Xft/RGBA -s rgb + ;; + *) + echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2 + exit 1 + ;; +esac +#+end_src + +** unlock-def-gk.py +:PROPERTIES: +:header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2" +:END: + +#+begin_src python :tangle no +import gnomekeyring as gk +# list_item_ids_sync('login')[0] == 1L +gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret()) +#+end_src + +** volume-info +:PROPERTIES: +:header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh" +:END: + +#+begin_src sh :tangle no +cur_vol=$(pamixer --get-volume) + +if [ $(pamixer --get-mute) = true ]; then + printf 'mt \n' "$cur_vol" +else + printf '%02d \n' "$cur_vol" +fi +#+end_src + +** wp + +My little wallpaper changer script. + +*** wp +:PROPERTIES: +:header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash" +:END: + +#+begin_src bash :tangle no +export DISPLAY=:0 + +case "$1" in + "day") + feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg + ;; + "night") + feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg + ;; + *) + echo $"Usage: $0 {day|night}" + exit 1 +esac +#+end_src + +*** wp-auto +:PROPERTIES: +:header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash" +:END: + +#+begin_src bash :tangle no +SED=$(which sed) +ROFI=$(which rofi) + +export DISPLAY=:0 +HOUR=$(date +%H) + +if [ -z "${SED}" ] +then + echo "Did not find 'sed', script cannot continue." + exit 1 +fi +if [ -z "${ROFI}" ] +then + echo "Did not find rofi, there is no point to continue." + exit 1 +fi + +### +# Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end. +# Repeated calls should leave the config clean-ish +### +function set_theme() +{ + CDIR="${HOME}/.config/rofi/" + if [ ! -d "${CDIR}" ] + then + mkdir -p ${CDIR} + fi + if [ -f "${CDIR}/config" ] + then + ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config" + fi + echo "rofi.theme: ${1}" >> "${CDIR}/config" + +} + +if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ] + then + feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg + xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources + set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi" + else + feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg + xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources + set_theme "/usr/share/rofi/themes//gruvbox-light.rasi" +fi +#+end_src + +*** wp.service +:PROPERTIES: +:header-args+: :tangle ~/.config/systemd/user/wp.service +:END: + +#+begin_src conf :tangle no +[Unit] +Description=wallpaper service + +[Service] +Type=oneshot +ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto +#+end_src + +*** wp.timer +:PROPERTIES: +:header-args+: :tangle ~/.config/systemd/user/wp.timer +:END: + +#+begin_src conf :tangle no +[Unit] +[Unit] +Description=wallpaper timer + +[Timer] +OnCalendar=07,21:00 +Unit=wp.service +Persistent=true + +[Install] +WantedBy=timers.target +#+end_src + +** zathura-sync.sh +:PROPERTIES: +:header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh" +:END: + +#+begin_src sh +pos="$1" +pdffile="$2" +zathura --synctex-forward "$pos" "$pdffile" || \ + ( + zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" & + sleep 1; zathura --synctex-forward "$pos" "$pdffile" ) +#+end_src ** Fun :) *** eat-em