X-Git-Url: https://git.shemshak.org/~bandali/configs/blobdiff_plain/33c5a5cd5f56d98224508b82b4f086b9b689b0a6..96840c88ee85277e4e8ca34bf741fd448aa4e59f:/rc.org?ds=inline diff --git a/rc.org b/rc.org index e036f88..85cd0e2 100644 --- a/rc.org +++ b/rc.org @@ -14,929 +14,2298 @@ Note: This file is best viewed inside Emacs with org mode. This section contains the configuration files (dotfiles) of various programs I use. -** [[https://github.com/afewmail/afew][afew]] +** dovecot :PROPERTIES: -:header-args+: :tangle ~/.config/afew/config +:header-args+: :tangle "/sudo::/etc/dovecot/dovecot.conf" :END: -#+begin_quote -an initial tagging script for notmuch mail -#+end_quote - #+begin_src conf -# This is the default filter chain -[SpamFilter] -#[ClassifyingFilter] -[KillThreadsFilter] -#[ListMailsFilter] -[ArchiveSentMailsFilter] -sent_tag = sent -[InboxFilter] - -#[Filter.1] -#query = 'folder:amin/lists/.haskell-cafe' -#tags = +lists;+lists/haskell-cafe -#message = lists/haskell-cafe - -#[Filter.2] -#query = 'folder:amin/lists/.haskell-weekly' -#tags = +lists;+lists/haskell-weekly -#message = lists/haskell-weekly - -#[Filter.3] -#query = 'folder:amin/lists/.hackernewsletter' -#tags = +lists;+lists/hackernewsletter -#message = lists/hackernewsletter - - -#[FolderNameFilter] -#folder_blacklist = Inbox -#maildir_separator = /. -#folder_transforms = Drafts:draft Junk:spam Trash:deleted Sent:sent Archive:archive lists/haskell-cafe:lists/haskell-cafe -#+end_src +protocols = imap -** bspwm +listen = 127.0.0.1 +log_path = /var/log/dovecot.log +info_log_path = /var/log/dovecot-info.log -*** bspwmrc -:PROPERTIES: -:header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh" -:END: +ssl = no +disable_plaintext_auth = no -#+begin_src sh -sxhkd & -sh ~/.fehbg & -xfce4-panel -d & -#compton & -sleep 0.5 && pasystray --notify=all & - -bspc monitor -d I II III IV V VI VII VIII IX X -#bspc monitor eDP-1 -d I II III IV V -#bspc monitor HDMI-1 -d VI VII VIII IX X - -#bspc config border_width 2 -#bspc config window_gap 8 -bspc config window_gap 0 - -bspc config bottom_padding 26 - -bspc config split_ratio 0.52 -bspc config borderless_monocle true -bspc config gapless_monocle true -bspc config click_to_focus button1 -bspc config directional_focus_tightness low - -bspc rule -a Firefox desktop='^1' follow=on -bspc rule -a Nightly desktop='^1' follow=on -bspc rule -a Emacs desktop='^2' state=tiled follow=on -#bspc rule -a Chromium desktop='^4' follow=on -bspc rule -a URxvt state=floating -bspc rule -a URxvt:tiled state=tiled -bspc rule -a Connman-gtk state=floating -bspc rule -a Xfce4-panel state=floating -bspc rule -a TelegramDesktop state=floating -bspc rule -a Ec state=floating -bspc rule -a Pavucontrol state=floating -bspc rule -a Eog state=floating -bspc rule -a Seahorse state=floating -bspc rule -a mpv state=floating -bspc rule -a Evince state=floating -bspc rule -a Meld state=floating -bspc rule -a Autokey-gtk state=floating -bspc rule -a Mousepad state=floating -bspc rule -a Wrapper-1.0 state=floating -bspc rule -a File-roller state=floating -bspc rule -a Gnome-disks state=floating -bspc rule -a Termite state=floating -bspc rule -a Termite:tiled state=tiled -bspc rule -a Thunderbird:Calendar state=floating -bspc rule -a Audacity state=floating -bspc rule -a Proof state=floating # pvs x-show-proof -bspc rule -a Nm-connection-editor state=floating -bspc rule -a Wire state=floating -bspc rule -a discord state=floating -bspc rule -a X2goclient state=floating -bspc rule -a SimpleScreenRecorder state=floating -bspc rule -a Gimp state=floating -bspc rule -a Wrapper-2.0 state=floating -bspc rule -a Zathura state=tiled -#+end_src +auth_verbose = yes +auth_mechanisms = plain -*** sxhkdrc -:PROPERTIES: -:header-args+: :tangle ~/.config/sxhkd/sxhkdrc -:END: +passdb { + driver = passwd-file + args = /etc/dovecot/passwd +} -#+begin_src conf -# -# wm independent hotkeys -# +userdb { + driver = static + args = uid=amin gid=amin home=/home/amin/mail/%d/%n + default_fields = mail=maildir:/home/amin/mail/%d/%n/mail +} -# terminal emulator -super + {_,shift} + Return - urxvt{_, -name tiled} +# mail_home = /home/amin/mail/%d/%n +# mail_location = maildir:/home/amin/mail/%d/%n/mail:LAYOUT=fs:INBOX=/home/amin/mail/%d/%n/mail/Inbox -#super + {_,shift} + Return -# termite{_, --name=tiled} +# namespace { +# inbox = yes +# separator = / +# } -# program launcher -super + space - rofi -show run -display-run '> ' -display-window ' 🗔 ' +mail_plugins = $mail_plugins fts fts_lucene -super + alt + space - xfce4-popup-whiskermenu +plugin { + fts = lucene + fts_lucene = whitespace_chars=@. + fts_autoindex = yes +} +#+end_src -# window finder -super + backslash - rofi -show window -display-run '> ' -display-window ' 🗔 ' +** libinput + +Improve XPS 15 9560's touchpad experience. + +# begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf") +#+begin_src conf :tangle no +Section "InputClass" + Identifier "libinput touchpad catchall" + Driver "libinput" + MatchIsTouchpad "on" + Option "ClickMethod" "clickfinger" + Option "NaturalScrolling" "true" + Option "Tapping" "on" + Option "TappingButtonMap" "lrm" +EndSection +#+end_src -# password manager -alt + space - rofi-pass +** mkinitcpio + +#+begin_src conf :tangle /sudo::/etc/mkinitcpio.conf :comments none +# vim:set ft=sh +# MODULES +# The following modules are loaded before any boot hooks are +# run. Advanced users may wish to specify all system modules +# in this array. For instance: +# MODULES=(piix ide_disk reiserfs) +MODULES=(i915) + +# BINARIES +# This setting includes any additional binaries a given user may +# wish into the CPIO image. This is run last, so it may be used to +# override the actual binaries included by a given hook +# BINARIES are dependency parsed, so you may safely ignore libraries +BINARIES=() + +# FILES +# This setting is similar to BINARIES above, however, files are added +# as-is and are not parsed in any way. This is useful for config files. +FILES=() + +# HOOKS +# This is the most important setting in this file. The HOOKS control the +# modules and scripts added to the image, and what happens at boot time. +# Order is important, and it is recommended that you do not change the +# order in which HOOKS are added. Run 'mkinitcpio -H ' for +# help on a given hook. +# 'base' is _required_ unless you know precisely what you are doing. +# 'udev' is _required_ in order to automatically load modules +# 'filesystems' is _required_ unless you specify your fs modules in MODULES +# Examples: +## This setup specifies all modules in the MODULES setting above. +## No raid, lvm2, or encrypted root is needed. +# HOOKS=(base) +# +## This setup will autodetect all modules for your system and should +## work as a sane default +# HOOKS=(base udev autodetect block filesystems) +# +## This setup will generate a 'full' image which supports most systems. +## No autodetection is done. +# HOOKS=(base udev block filesystems) +# +## This setup assembles a pata mdadm array with an encrypted root FS. +## Note: See 'mkinitcpio -H mdadm' for more information on raid devices. +# HOOKS=(base udev block mdadm encrypt filesystems) +# +## This setup loads an lvm2 volume group on a usb device. +# HOOKS=(base udev block lvm2 filesystems) +# +## NOTE: If you have /usr on a separate partition, you MUST include the +# usr, fsck and shutdown hooks. +HOOKS=(base udev autodetect modconf block keyboard encrypt lvm2 resume filesystems fsck) + +# COMPRESSION +# Use this to compress the initramfs image. By default, gzip compression +# is used. Use 'cat' to create an uncompressed image. +#COMPRESSION="gzip" +#COMPRESSION="bzip2" +#COMPRESSION="lzma" +#COMPRESSION="xz" +#COMPRESSION="lzop" +#COMPRESSION="lz4" + +# COMPRESSION_OPTIONS +# Additional options for the compressor +#COMPRESSION_OPTIONS=() +#+end_src -# firefox -#super + r -# firefox +** mpd +:PROPERTIES: +:header-args+: :tangle ~/.config/mpd/mpd.conf +:END: -# chromium -#super + c -# chromium -incognito +#+begin_src conf +# An example configuration file for MPD. +# Read the user manual for documentation: http://www.musicpd.org/doc/user/ -# emacs -super + e - emacs -# make sxhkd reload its configuration files: -super + Escape - pkill -USR1 -x sxhkd +# Files and directories ####################################################### +# +# This setting controls the top directory which MPD will search to discover the +# available audio files and add them to the daemon's online database. This +# setting defaults to the XDG directory, otherwise the music directory will be +# be disabled and audio files will only be accepted over ipc socket (using +# file:// protocol) or streaming files over an accepted protocol. +# +music_directory "~/usr/music" +# +# This setting sets the MPD internal playlist directory. The purpose of this +# directory is storage for playlists created by MPD. The server will use +# playlist files not created by the server but only if they are in the MPD +# format. This setting defaults to playlist saving being disabled. +# +playlist_directory "~/.mpd/playlists" +# +# This setting sets the location of the MPD database. This file is used to +# load the database at server start up and store the database while the +# server is not up. This setting defaults to disabled which will allow +# MPD to accept files over ipc socket (using file:// protocol) or streaming +# files over an accepted protocol. +# +db_file "~/.mpd/database" +# +# These settings are the locations for the daemon log files for the daemon. +# These logs are great for troubleshooting, depending on your log_level +# settings. +# +# The special value "syslog" makes MPD use the local syslog daemon. This +# setting defaults to logging to syslog, otherwise logging is disabled. +# +log_file "~/.mpd/log" +# +# This setting sets the location of the file which stores the process ID +# for use of mpd --kill and some init scripts. This setting is disabled by +# default and the pid file will not be stored. +# +pid_file "~/.mpd/pid" +# +# This setting sets the location of the file which contains information about +# most variables to get MPD back into the same general shape it was in before +# it was brought down. This setting is disabled by default and the server +# state will be reset on server start up. +# +state_file "~/.mpd/state" +# +# The location of the sticker database. This is a database which +# manages dynamic information attached to songs. +# +sticker_file "~/.mpd/sticker.sql" +# +############################################################################### -# volume {up,down} -XF86Audio{Raise,Lower}Volume - pamixer --allow-boost --{in,de}crease 5 -# mute -XF86AudioMute - pamixer --toggle-mute +# General music daemon options ################################################ +# +# This setting specifies the user that MPD will run as. MPD should never run as +# root and you may use this setting to make MPD change its user ID after +# initialization. This setting is disabled by default and MPD is run as the +# current user. +# +#user "nobody" +# +# This setting specifies the group that MPD will run as. If not specified +# primary group of user specified with "user" setting will be used (if set). +# This is useful if MPD needs to be a member of group such as "audio" to +# have permission to use sound card. +# +#group "nogroup" +# +# This setting sets the address for the daemon to listen on. Careful attention +# should be paid if this is assigned to anything other then the default, any. +# This setting can deny access to control of the daemon. Not effective if +# systemd socket activiation is in use. +# +# For network +#bind_to_address "any" +# +# And for Unix Socket +#bind_to_address "~/.mpd/socket" +# +# This setting is the TCP port that is desired for the daemon to get assigned +# to. +# +#port "6600" +# +# This setting controls the type of information which is logged. Available +# setting arguments are "default", "secure" or "verbose". The "verbose" setting +# argument is recommended for troubleshooting, though can quickly stretch +# available resources on limited hardware storage. +# +#log_level "default" +# +# If you have a problem with your MP3s ending abruptly it is recommended that +# you set this argument to "no" to attempt to fix the problem. If this solves +# the problem, it is highly recommended to fix the MP3 files with vbrfix +# (available from ), at which +# point gapless MP3 playback can be enabled. +# +#gapless_mp3_playback "yes" +# +# Setting "restore_paused" to "yes" puts MPD into pause mode instead +# of starting playback after startup. +# +#restore_paused "no" +# +# This setting enables MPD to create playlists in a format usable by other +# music players. +# +#save_absolute_paths_in_playlists "no" +# +# This setting defines a list of tag types that will be extracted during the +# audio file discovery process. The complete list of possible values can be +# found in the user manual. +#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc" +# +# This setting enables automatic update of MPD's database when files in +# music_directory are changed. +# +#auto_update "yes" +# +# Limit the depth of the directories being watched, 0 means only watch +# the music directory itself. There is no limit by default. +# +#auto_update_depth "3" +# +############################################################################### -# playback control -XF86Audio{Play,Prev,Next} - mpc {toggle,prev,next} -# lock the screen -super + shift + q - light-locker-command -l +# Symbolic link behavior ###################################################### +# +# If this setting is set to "yes", MPD will discover audio files by following +# symbolic links outside of the configured music_directory. +# +#follow_outside_symlinks "yes" +# +# If this setting is set to "yes", MPD will discover audio files by following +# symbolic links inside of the configured music_directory. +# +#follow_inside_symlinks "yes" +# +############################################################################### -# Toggle keyboard layout -super + F7 - toggle-layout -# Toggle Xfce presentation mode -XF86LaunchB - toggle-presentation-mode +# Zeroconf / Avahi Service Discovery ########################################## +# +# If this setting is set to "yes", service information will be published with +# Zeroconf / Avahi. +# +#zeroconf_enabled "yes" +# +# The argument to this setting will be the Zeroconf / Avahi unique name for +# this MPD server on the network. +# +#zeroconf_name "Music Player" +# +############################################################################### -# monitor brightness -XF86MonBrightness{Up,Down} - light -{A,U} 5 -super + apostrophe - rofi-light +# Permissions ################################################################# +# +# If this setting is set, MPD will require password authorization. The password +# setting can be specified multiple times for different password profiles. +# +#password "password@read,add,control,admin" +# +# This setting specifies the permissions a user has who has not yet logged in. +# +#default_permissions "read,add,control,admin" +# +############################################################################### -# keyboard brightness -#XF86KbdBrightness{Up,Down} -# kbdlight {up,down} +# Database ####################################################################### # -# bspwm hotkeys + +#database { +# plugin "proxy" +# host "other.mpd.host" +# port "6600" +#} + +# Input ####################################################################### # -# quit bspwm normally -super + alt + Escape - bspc quit +input { + plugin "curl" +# proxy "proxy.isp.com:8080" +# proxy_user "user" +# proxy_password "password" +} -# close and kill -super + {w,q} - bspc node -{c,k} +# +############################################################################### -# alternate between the tiled and monocle layout -super + m - bspc desktop -l next +# Audio Output ################################################################ +# -# send the newest marked node to the newest preselected node -super + y - bspc node newest.marked.local -n newest.!automatic.local +audio_output { + type "pulse" + name "pulse audio" +} -# swap the current node and the biggest node -super + g - bspc node -s biggest +audio_output { + type "fifo" + name "my_fifo" + path "/tmp/mpd.fifo" + format "44100:16:2" +} +# MPD supports various audio output types, as well as playing through multiple +# audio outputs at the same time, through multiple audio_output settings +# blocks. Setting this block is optional, though the server will only attempt +# autodetection for one sound card. # -# state/flags +# An example of an ALSA output: # +#audio_output { +# type "alsa" +# name "My ALSA Device" +## device "hw:0,0" # optional +## mixer_type "hardware" # optional +## mixer_device "default" # optional +## mixer_control "PCM" # optional +## mixer_index "0" # optional +#} +# +# An example of an OSS output: +# +#audio_output { +# type "oss" +# name "My OSS Device" +## device "/dev/dsp" # optional +## mixer_type "hardware" # optional +## mixer_device "/dev/mixer" # optional +## mixer_control "PCM" # optional +#} +# +# An example of a shout output (for streaming to Icecast): +# +#audio_output { +# type "shout" +# encoder "vorbis" # optional +# name "My Shout Stream" +# host "localhost" +# port "8000" +# mount "/mpd.ogg" +# password "hackme" +# quality "5.0" +# bitrate "128" +# format "44100:16:1" +## protocol "icecast2" # optional +## user "source" # optional +## description "My Stream Description" # optional +## url "http://example.com" # optional +## genre "jazz" # optional +## public "no" # optional +## timeout "2" # optional +## mixer_type "software" # optional +#} +# +# An example of a recorder output: +# +#audio_output { +# type "recorder" +# name "My recorder" +# encoder "vorbis" # optional, vorbis or lame +# path "/var/lib/mpd/recorder/mpd.ogg" +## quality "5.0" # do not define if bitrate is defined +# bitrate "128" # do not define if quality is defined +# format "44100:16:1" +#} +# +# An example of a httpd output (built-in HTTP streaming server): +# +#audio_output { +# type "httpd" +# name "My HTTP Stream" +# encoder "vorbis" # optional, vorbis or lame +# port "8000" +# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6 +## quality "5.0" # do not define if bitrate is defined +# bitrate "128" # do not define if quality is defined +# format "44100:16:1" +# max_clients "0" # optional 0=no limit +#} +# +# An example of a pulseaudio output (streaming to a remote pulseaudio server) +# +#audio_output { +# type "pulse" +# name "My Pulse Output" +## server "remote_server" # optional +## sink "remote_server_sink" # optional +#} +# +# An example of a winmm output (Windows multimedia API). +# +#audio_output { +# type "winmm" +# name "My WinMM output" +## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional +# or +## device "0" # optional +## mixer_type "hardware" # optional +#} +# +# An example of an openal output. +# +#audio_output { +# type "openal" +# name "My OpenAL output" +## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional +#} +# +# An example of an sndio output. +# +#audio_output { +# type "sndio" +# name "sndio output" +# mixer_type "software" +#} +# +# An example of an OS X output: +# +#audio_output { +# type "osx" +# name "My OS X Device" +## device "Built-in Output" # optional +## channel_map "-1,-1,0,1" # optional +#} +# +## Example "pipe" output: +# +#audio_output { +# type "pipe" +# name "my pipe" +# command "aplay -f cd 2>/dev/null" +## Or if you're want to use AudioCompress +# command "AudioCompress -m | aplay -f cd 2>/dev/null" +## Or to send raw PCM stream through PCM: +# command "nc example.org 8765" +# format "44100:16:2" +#} +# +## An example of a null output (for no audio output): +# +#audio_output { +# type "null" +# name "My Null Output" +# mixer_type "none" # optional +#} +# +############################################################################### -# set the window state -super + {t,shift + t,s,f} - bspc node -t {tiled,pseudo_tiled,floating,fullscreen} -# set the node flags -super + ctrl + {m,x,y,z} - bspc node -g {marked,locked,sticky,private} +# Normalization automatic volume adjustments ################################## +# +# This setting specifies the type of ReplayGain to use. This setting can have +# the argument "off", "album", "track" or "auto". "auto" is a special mode that +# chooses between "track" and "album" depending on the current state of +# random playback. If random playback is enabled then "track" mode is used. +# See for more details about ReplayGain. +# This setting is off by default. +# +#replaygain "album" +# +# This setting sets the pre-amp used for files that have ReplayGain tags. By +# default this setting is disabled. +# +#replaygain_preamp "0" +# +# This setting sets the pre-amp used for files that do NOT have ReplayGain tags. +# By default this setting is disabled. +# +#replaygain_missing_preamp "0" +# +# This setting enables or disables ReplayGain limiting. +# MPD calculates actual amplification based on the ReplayGain tags +# and replaygain_preamp / replaygain_missing_preamp setting. +# If replaygain_limit is enabled MPD will never amplify audio signal +# above its original level. If replaygain_limit is disabled such amplification +# might occur. By default this setting is enabled. +# +#replaygain_limit "yes" +# +# This setting enables on-the-fly normalization volume adjustment. This will +# result in the volume of all playing audio to be adjusted so the output has +# equal "loudness". This setting is disabled by default. +# +#volume_normalization "no" +# +############################################################################### +# Character Encoding ########################################################## +# +# If file or directory names do not display correctly for your locale then you +# may need to modify this setting. # -# focus/swap +#filesystem_charset "UTF-8" # +############################################################################### +#+end_src + +** ncmpcpp -# focus the node in the given direction -super + {_,shift + }{h,j,k,l} - bspc node -{f,s} {west,south,north,east} +*** config +:PROPERTIES: +:header-args+: :tangle ~/.ncmpcpp/config +:END: -# focus the node for the given path jump -super + {p,b,comma,period} - bspc node -f @{parent,brother,first,second} +#+begin_src conf :tangle no +############################################################## +## This is the example configuration file. Copy it to ## +## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ## +## and set up your preferences. ## +############################################################## +# +##### directories ###### +## +## Directory for storing ncmpcpp related files. +## Changing it is useful if you want to store +## everything somewhere else and provide command +## line setting for alternative location to config +## file which defines that while launching ncmpcpp. +## +# +ncmpcpp_directory = ~/.ncmpcpp +# +## +## Directory for storing downloaded lyrics. It +## defaults to ~/.lyrics since other MPD clients +## (eg. ncmpc) also use that location. +## +# +#lyrics_directory = ~/.lyrics +# +##### connection settings ##### +# +#mpd_host = localhost +# +#mpd_port = 6600 +# +#mpd_connection_timeout = 5 +# +## Needed for tag editor and file operations to work. +## +mpd_music_dir = ~/usr/music +# +#mpd_crossfade_time = 5 +# +##### music visualizer ##### +## +## Note: In order to make music visualizer work you'll +## need to use mpd fifo output, whose format parameter +## has to be set to 44100:16:1 for mono visualization +## or 44100:16:2 for stereo visualization. Example +## configuration (it has to be put into mpd.conf): +## +## audio_output { +## type "fifo" +## name "Visualizer feed" +## path "/tmp/mpd.fifo" +## format "44100:16:2" +## } +## +# +visualizer_fifo_path = /tmp/mpd.fifo +# +## +## Note: Below parameter is needed for ncmpcpp +## to determine which output provides data for +## visualizer and thus allow syncing between +## visualization and sound as currently there +## are some problems with it. +## +# +visualizer_output_name = my fifo +# +## +## If you set format to 44100:16:2, make it 'yes'. +## +visualizer_in_stereo = yes +# +## +## Multiply received samples by given value. Very +## useful for proper visualization of quiet music. +## +#visualizer_sample_multiplier = 1 +# +## +## Note: Below parameter defines how often ncmpcpp +## has to "synchronize" visualizer and audio outputs. +## 30 seconds is optimal value, but if you experience +## synchronization problems, set it to lower value. +## Keep in mind that sane values start with >=10. +## +# +visualizer_sync_interval = 30 +# +## +## Note: To enable spectrum frequency visualization +## you need to compile ncmpcpp with fftw3 support. +## +# +## Available values: spectrum, wave, wave_filled, ellipse. +## +visualizer_type = spectrum +# +#visualizer_look = ●▮ +visualizer_look = "●•" +# +#visualizer_color = blue, cyan, green, yellow, magenta, red +# +## Alternative subset of 256 colors for terminals that support it. +## +#visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161 +# +##### system encoding ##### +## +## ncmpcpp should detect your charset encoding +## but if it failed to do so, you can specify +## charset encoding you are using here. +## +## Note: You can see whether your ncmpcpp build +## supports charset detection by checking output +## of `ncmpcpp --version`. +## +## Note: Since MPD uses UTF-8 by default, setting +## this option makes sense only if your encoding +## is different. +## +# +#system_encoding = "" +# +##### delays ##### +# +## Time of inactivity (in seconds) after playlist +## highlighting will be disabled (0 = always on). +## +#playlist_disable_highlight_delay = 5 +# +## Defines how long messages are supposed to be visible. +## +#message_delay_time = 5 +# +##### song format ##### +## +## For a song format you can use: +## +## %l - length +## %f - filename +## %D - directory +## %a - artist +## %A - album artist +## %t - title +## %b - album +## %y - date +## %n - track number (01/12 -> 01) +## %N - full track info (01/12 -> 01/12) +## %g - genre +## %c - composer +## %p - performer +## %d - disc +## %C - comment +## %P - priority +## $R - begin right alignment +## +## If you want to make sure that a part of the format is displayed +## only when certain tags are present, you can archieve it by +## grouping them with brackets, e.g. '{%a - %t}' will be evaluated +## to 'ARTIST - TITLE' if both tags are present or '' otherwise. +## It is also possible to define a list of alternatives by providing +## several groups and separating them with '|', e.g. '{%t}|{%f}' +## will be evaluated to 'TITLE' or 'FILENAME' if the former is not +## present. +## +## Note: If you want to set limit on maximal length of a tag, just +## put the appropriate number between % and character that defines +## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'. +## +## In addition, formats support markers used for text attributes. +## They are followed by character '$'. After that you can put: +## +## - 0 - default window color (discards all other colors) +## - 1 - black +## - 2 - red +## - 3 - green +## - 4 - yellow +## - 5 - blue +## - 6 - magenta +## - 7 - cyan +## - 8 - white +## - 9 - end of current color +## - b - bold text +## - u - underline text +## - r - reverse colors +## - a - use alternative character set +## +## If you don't want to use a non-color attribute anymore, just put it +## again, but this time insert character '/' between '$' and attribute +## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag +## or filename with reversed colors. +## +## If you want to use 256 colors and/or background colors in formats +## (the naming scheme is described below in section about color +## definitions), it can be done with the syntax $(COLOR), e.g. to set +## the artist tag to one of the non-standard colors and make it have +## yellow background, you need to write $(197_yellow)%a$(end). Note +## that for standard colors this is interchangable with attributes +## listed above. +## +## Note: colors can be nested. +## +# +#song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9} +# +#song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f} +# +#song_library_format = {%n - }{%t}|{%f} +# +# +#alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b +# +#alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D} +# +#now_playing_prefix = $b +# +#now_playing_suffix = $/b +# +#browser_playlist_prefix = "$2playlist$9 " +# +#selected_item_prefix = $6 +# +#selected_item_suffix = $9 +# +#modified_item_prefix = $3> $9 +# +## +## Note: attributes are not supported for the following variables. +## +#song_window_title_format = {%a - }{%t}|{%f} +## +## Note: Below variables are used for sorting songs in browser. +## The sort mode determines how songs are sorted, and can be used +## in combination with a sort format to specify a custom sorting format. +## Available values for browser_sort_mode are "name", "mtime", "format" +## and "noop". +## +# +#browser_sort_mode = name +# +#browser_sort_format = {%a - }{%t}|{%f} {(%l)} +# +##### columns settings ##### +## +## syntax of song columns list format is "column column etc." +## +## - syntax for each column is: +## +## (width of the column)[color of the column]{displayed tag} +## +## Note: Width is by default in %, if you want a column to +## have fixed size, add 'f' after the value, e.g. (10)[white]{a} +## will be the column that take 10% of screen (so the real width +## will depend on actual screen size), whereas (10f)[white]{a} +## will take 10 terminal cells, no matter how wide the screen is. +## +## - color is optional (if you want the default one, +## leave the field empty). +## +## Note: You can give a column additional attributes by putting appropriate +## character after displayed tag character. Available attributes are: +## +## - r - column will be right aligned +## - E - if tag is empty, empty tag marker won't be displayed +## +## You can also: +## +## - give a column custom name by putting it after attributes, +## separated with character ':', e.g. {lr:Length} gives you +## right aligned column of lengths named "Length". +## +## - define sequence of tags, that have to be displayed in case +## predecessor is empty in a way similar to the one in classic +## song format, i.e. using '|' character, e.g. {a|c|p:Owner} +## creates column named "Owner" that tries to display artist +## tag and then composer and performer if previous ones are +## not available. +## +# +#song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l} +# +##### various settings ##### +# +## +## Note: Custom command that will be executed each +## time song changes. Useful for notifications etc. +## +#execute_on_song_change = "" +# +#playlist_show_mpd_host = no +# +#playlist_show_remaining_time = no +# +#playlist_shorten_total_times = no +# +#playlist_separate_albums = no +# +## +## Note: Possible display modes: classic, columns. +## +#playlist_display_mode = columns +# +#browser_display_mode = classic +# +#search_engine_display_mode = classic +# +#playlist_editor_display_mode = classic +# +#discard_colors_if_item_is_selected = yes +# +#incremental_seeking = yes +# +#seek_time = 1 +# +#volume_change_step = 2 +# +#autocenter_mode = no +# +#centered_cursor = no +# +## +## Note: You can specify third character which will +## be used to build 'empty' part of progressbar. +## +#progressbar_look = => +progressbar_look = "─╼╶" +#progressbar_look = "─⊙╶" +# +#progressbar_boldness = yes +# +## Available values: database, playlist. +## +#default_place_to_search_in = database +# +## Available values: classic, alternative. +## +#user_interface = classic +# +#data_fetching_delay = yes +# +## Available values: artist, album_artist, date, genre, composer, performer. +## +#media_library_primary_tag = artist +# +## Available values: wrapped, normal. +## +#default_find_mode = wrapped +# +#default_tag_editor_pattern = %n - %t +# +#header_visibility = yes +# +#statusbar_visibility = yes +# +#titles_visibility = yes +# +#header_text_scrolling = yes +# +#cyclic_scrolling = no +# +#lines_scrolled = 2 +# +#follow_now_playing_lyrics = no +# +#fetch_lyrics_for_current_song_in_background = no +# +#store_lyrics_in_song_dir = no +# +#generate_win32_compatible_filenames = yes +# +#allow_for_physical_item_deletion = no +# +## +## Note: If you set this variable, ncmpcpp will try to +## get info from last.fm in language you set and if it +## fails, it will fall back to english. Otherwise it will +## use english the first time. +## +## Note: Language has to be expressed as an ISO 639 alpha-2 code. +## +#lastfm_preferred_language = en +# +#show_hidden_files_in_local_browser = no +# +## +## How shall screen switcher work? +## +## - "previous" - switch between the current and previous screen. +## - "screen1,...,screenN" - switch between given sequence of screens. +## +## Screens available for use: help, playlist, browser, search_engine, +## media_library, playlist_editor, tag_editor, outputs, visualizer, clock. +## +#screen_switcher_mode = playlist, browser +# +## +## Note: You can define startup screen +## by choosing screen from the list above. +## +#startup_screen = playlist +# +## +## Note: You can define startup slave screen +## by choosing screen from the list above or +## an empty value for no slave screen. +## +#startup_slave_screen = "" +# +#startup_slave_screen_focus = no +# +## +## Default width of locked screen (in %). +## Acceptable values are from 20 to 80. +## +# +#locked_screen_width_part = 50 +# +#ask_for_locked_screen_width_part = yes +# +#jump_to_now_playing_song_at_start = yes +# +#ask_before_clearing_playlists = yes +# +#clock_display_seconds = no +# +#display_volume_level = yes +# +#display_bitrate = no +# +#display_remaining_time = no +# +## Available values: none, basic, extended, perl. +## +#regular_expressions = perl +# +## +## Note: If below is enabled, ncmpcpp will ignore leading +## "The" word while sorting items in browser, tags in +## media library, etc. +## +#ignore_leading_the = no +# +#block_search_constraints_change_if_items_found = yes +# +#mouse_support = yes +# +#mouse_list_scroll_whole_page = yes +# +#empty_tag_marker = +# +#tags_separator = " | " +# +#tag_editor_extended_numeration = no +# +#media_library_sort_by_mtime = no +# +#enable_window_title = yes +# +## +## Note: You can choose default search mode for search +## engine. Available modes are: +## +## - 1 - use mpd built-in searching (no regexes, pattern matching) +## - 2 - use ncmpcpp searching (pattern matching with support for regexes, +## but if your mpd is on a remote machine, downloading big database +## to process it can take a while +## - 3 - match only exact values (this mode uses mpd function for searching +## in database and local one for searching in current playlist) +## +# +#search_engine_default_search_mode = 1 +# +#external_editor = nano +# +## Note: set to yes if external editor is a console application. +## +#use_console_editor = yes +# +##### colors definitions ##### +## +## It is possible to set a background color by setting a color +## value "_", e.g. red_black will set +## foregound color to red and background color to black. +## +## In addition, for terminals that support 256 colors it +## is possible to set one of them by using a number in range +## [1, 256] instead of color name, e.g. numerical value +## corresponding to red_black is 2_1. To find out if the +## terminal supports 256 colors, run ncmpcpp and check out +## the bottom of the help screen for list of available colors +## and their numerical values. +## +## Note: due to technical limitations of ncurses, if 256 colors +## are used, it is possible to either use only the colors with +## default background color, or all pairs from 1_1 up to 254_127, +## depending on the ncurses version used. +## +# +#colors_enabled = yes +# +#empty_tag_color = cyan +# +#header_window_color = default +# +#volume_color = default +# +#state_line_color = default +# +#state_flags_color = default +# +#main_window_color = yellow +# +#color1 = white +# +#color2 = green +# +#main_window_highlight_color = yellow +# +#progressbar_color = black +# +#progressbar_elapsed_color = green +# +#statusbar_color = default +# +#alternative_ui_separator_color = black +# +#active_column_color = red +# +#window_border_color = green +# +#active_window_border = red +# +#+end_src -# focus the next/previous node in the current desktop -super + {_,shift + }c - bspc node -f {next,prev}.local +*** bindings +:PROPERTIES: +:header-args+: :tangle ~/.ncmpcpp/bindings +:END: -# focus the next/previous desktop in the current monitor -super + bracket{left,right} - bspc desktop -f {prev,next}.local +#+begin_src conf :tangle no +def_key "j" + scroll_down +def_key "k" + scroll_up + +def_key "ctrl-u" + page_up +def_key "ctrl-d" + page_down + +def_key "h" + previous_column +def_key "l" + next_column + +def_key "." + show_lyrics + +def_key "n" + next_found_item +def_key "N" + previous_found_item + +def_key "J" + move_sort_order_down +def_key "K" + move_sort_order_up +#+end_src -# send to next/prev desktop -super + shift + bracket{left,right} - bspc node -d {prev,next} --follow +** pacman -# focus the last node/desktop -super + {grave,Tab} - bspc {node,desktop} -f last +*** conf -# focus the older or newer node in the focus history -super + {o,i} - bspc wm -h off; \ - bspc node {older,newer} -f; \ - bspc wm -h on +#+begin_src conf :tangle /sudo::/etc/pacman.conf :comments none +# +# /etc/pacman.conf +# +# See the pacman.conf(5) manpage for option and repository directives -# focus or send to the given desktop -super + {_,shift + }{1-9,0} - bspc {desktop -f,node -d} '^{1-9,10}' +# +# GENERAL OPTIONS +# +[options] +# The following paths are commented out with their default values listed. +# If you wish to use different paths, uncomment and update the paths. +#RootDir = / +#DBPath = /var/lib/pacman/ +#CacheDir = /var/cache/pacman/pkg/ +#LogFile = /var/log/pacman.log +#GPGDir = /etc/pacman.d/gnupg/ +#HookDir = /etc/pacman.d/hooks/ +HoldPkg = pacman glibc +#XferCommand = /usr/bin/curl -L -C - -f -o %o %u +#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u +#CleanMethod = KeepInstalled +#UseDelta = 0.7 +Architecture = auto + +# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup +#IgnorePkg = +#IgnoreGroup = + +#NoUpgrade = +#NoExtract = + +# Misc options +#UseSyslog +Color +TotalDownload +CheckSpace +VerbosePkgLists + +# By default, pacman accepts packages signed by keys that its local keyring +# trusts (see pacman-key and its man page), as well as unsigned packages. +SigLevel = Required DatabaseOptional +LocalFileSigLevel = Optional +#RemoteFileSigLevel = Required + +# NOTE: You must run `pacman-key --init` before first using pacman; the local +# keyring can then be populated with the keys of all Arch/Parabola packagers +# with `pacman-key --populate archlinux` and `pacman-key --populate parabola`. # -# preselect +# REPOSITORIES +# - can be defined here or included from another file +# - pacman will search repositories in the order defined here +# - local/custom mirrors can be added here or in separate files +# - repositories listed first will take precedence when packages +# have identical names, regardless of version number +# - URLs will have $repo replaced by the name of the current repo +# - URLs will have $arch replaced by the name of the architecture +# +# Repository entries are of the format: +# [repo-name] +# Server = ServerName +# Include = IncludePath +# +# The header [repo-name] is crucial - it must be present and +# uncommented to enable the repo. # -# preselect the direction -super + ctrl + {h,j,k,l} - bspc node -p {west,south,north,east} +# The testing repositories are disabled by default. To enable, uncomment the +# repo name header and Include lines. You can add preferred servers immediately +# after the header, and they will be used before the default mirrors. -# preselect the ratio -super + ctrl + {1-9} - bspc node -o 0.{1-9} +# NOTE: Nonprism is a particular repository that aims to provide software built +# and patched without services under global data surveillance programs like PRISM, +# XKeyscore and Tempora. For more info see: https://wiki.parabola.nu/Nonprism -# cancel the preselection for the focused node -super + ctrl + space - bspc node -p cancel +#[nonprism-testing] +#Include = /etc/pacman.d/mirrorlist -# cancel the preselection for the focused desktop -super + ctrl + shift + space - bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel +#[nonprism] +#Include = /etc/pacman.d/mirrorlist -# -# move/resize -# +[libre-testing] +Include = /etc/pacman.d/mirrorlist -# expand a window by moving one of its side outward -super + alt + {h,j,k,l} - bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0} +[libre] +Include = /etc/pacman.d/mirrorlist -# contract a window by moving one of its side inward -super + alt + shift + {h,j,k,l} - bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0} +#[testing] +#Include = /etc/pacman.d/mirrorlist -# move a floating window -super + {Left,Down,Up,Right} - bspc node -v {-20 0,0 20,0 -20,20 0} +[core] +Include = /etc/pacman.d/mirrorlist -#alt + bracket{left,right} -# xdotool key --clearmodifiers ctrl+Page_{Up,Down} -#+end_src +[extra] +Include = /etc/pacman.d/mirrorlist -** compton -:PROPERTIES: -:header-args+: :tangle ~/.config/compton.conf -:END: +#[community-testing] +#Include = /etc/pacman.d/mirrorlist -#+begin_src conf -# Shadow -shadow = false; # Enabled client-side shadows on windows. -no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows. -no-dnd-shadow = true; # Don't draw shadows on DND windows. -clear-shadow = true; # Zero the part of the shadow's mask behind the - # window. Fix some weirdness with ARGB windows. -shadow-radius = 5; # The blur radius for shadows. (default 12) -shadow-offset-x = -5; # The left offset for shadows. (default -15) -shadow-offset-y = -5; # The top offset for shadows. (default -15) -# shadow-opacity = 0.7; # The translucency for shadows. (default .75) -# shadow-red = 0.0; # Red color value of shadow. (0.0 - 1.0, defaults to 0) -# shadow-green = 0.0; # Green color value of shadow. (0.0 - 1.0, defaults to 0) -# shadow-blue = 0.0; # Blue color value of shadow. (0.0 - 1.0, defaults to 0) -shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ]; # Exclude conditions for shadows. -# shadow-exclude = "n:e:Notification"; -#shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications -shadow-ignore-shaped = true; # Avoid drawing shadow on all shaped windows - # (see also: --detect-rounded-corners) - -# Opacity -menu-opacity = 1.0; # The opacity for menus. (default 1.0) -#inactive-opacity = 0.9; # Default opacity of inactive windows. (0.0 - 1.0) -# active-opacity = 0.8; # Default opacity for active windows. (0.0 - 1.0) -frame-opacity = 1.0; # Opacity of window titlebars and borders. (0.1 - 1.0) -# inactive-opacity-override = true; # Let inactive opacity set by 'inactive-opacity' overrides - # value of _NET_WM_OPACITY. Bad choice. -alpha-step = 0.06; # XRender backend: Step size for alpha pictures. Increasing - # it may result in less X resource usage, - # Yet fading may look bad. -#inactive-dim = 0.5; # Dim inactive windows. (0.0 - 1.0) -#inactive-dim-fixed = true; # Do not let dimness adjust based on window opacity. -# blur-background = true; # Blur background of transparent windows. - # Bad performance with X Render backend. - # GLX backend is preferred. -# blur-background-frame = true; # Blur background of opaque windows with transparent - # frames as well. -blur-background-fixed = true; # Do not let blur radius adjust based on window opacity. -blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ]; - # Exclude conditions for background blur. - -# Fading -fading = false; # Fade windows during opacity changes. -fade-delta = 3; # The time between steps in a fade in milliseconds. (default 10). -fade-in-step = 0.03; # Opacity change between steps while fading in. (default 0.028). -fade-out-step = 0.03; # Opacity change between steps while fading out. (default 0.03). -# no-fading-openclose = true; # Avoid fade windows in/out when opening/closing. -fade-exclude = [ ]; # Exclude conditions for fading. - -# Other -backend = "glx" # Backend to use: "xrender" or "glx". GLX backend is typically - # much faster but depends on a sane driver. -mark-wmwin-focused = true; # Try to detect WM windows and mark them as active. -mark-ovredir-focused = true; # Mark all non-WM but override-redirect windows active (e.g. menus). -use-ewmh-active-win = true; # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused - # instead of using FocusIn/Out events. Usually more reliable but - # depends on a EWMH-compliant WM. -detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on. -detect-client-opacity = true; # Detect _NET_WM_OPACITY on client windows, useful for window - # managers not passing _NET_WM_OPACITY of client windows to frame - # windows. -refresh-rate = 0; # For --sw-opti: Specify refresh rate of the screen. 0 for auto. -vsync = "drm"; # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc" - # See man page for more details. -dbe = false; # Enable DBE painting mode. Rarely needed. -paint-on-overlay = true; # Painting on X Composite overlay window. Recommended. -sw-opti = false; # Limit compton to repaint at most once every 1 / refresh_rate. - # Incompatible with certain VSync methods. -unredir-if-possible = false; # Unredirect all windows if a full-screen opaque window is - # detected, to maximize performance for full-screen windows. -focus-exclude = [ ]; # A list of conditions of windows that should always be considered - # focused. -detect-transient = true; # Use WM_TRANSIENT_FOR to group windows, and consider windows in - # the same group focused at the same time. -detect-client-leader = true; # Use WM_CLIENT_LEADER to group windows. -invert-color-include = [ ]; # Conditions for windows to be painted with inverted color. - -# GLX backend # GLX backend fine-tune options. See man page for more info. -glx-no-stencil = true; # Recommended. -glx-copy-from-front = false; # Useful with --glx-swap-method, -# glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync. -# glx-no-rebind-pixmap = true; # Recommended if it works. -glx-no-rebind-pixmap = true; # Recommended if it works. -#glx-swap-method = "4"; # See man page. -glx-swap-method = "4"; # See man page. - -# Window type settings -wintypes: -{ - tooltip = { fade = true; shadow = false; opacity = 1; focus = true; }; - menu = { shadow = false; }; - dropdown_menu = { shadow = false; }; - popup_menu = { shadow = false; }; - utility = { shadow = false; }; - # fade: Fade the particular type of windows. - # shadow: Give those windows shadow - # opacity: Default opacity for the type of windows. - # focus: Whether to always consider windows of this type focused. -}; -#+end_src +[community] +Include = /etc/pacman.d/mirrorlist -** Dunst -:PROPERTIES: -:header-args+: :tangle ~/.config/dunst/dunstrc -:END: +# The PCR (Parabola Community Repository) contains packages maintained by trusted +# members of the Parabola community. It also contains packages maintained by +# Parabola developers, but that the developer decided didn't belong in core/libre. -#+begin_src conf -[global] -#font = Ubuntu Mono 10.5 -font = Inconsolata 11 - -# Path to default icons. -icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/ - -icon_position = left -# bold -# italic -# strikethrough -# underline -markup = full -# The format of the message. Possible variables are: -# %a appname -# %s summary -# %b body -# %i iconname (including its path) -# %I iconname (without its path) -# %p progress value if set ([ 0%] to [100%]) or nothing -# Markup is allowed -format = "%s\n%b" -# Sort messages by urgency -sort = yes -# Show how many messages are currently hidden (because of geometry) -indicate_hiddenl= no -# Alignment of message text. -# Possible values are "left", "center" and "right" -alignment = center -# The frequency with wich text that is longer than the notification -# window allows bounces back and forth. -# This option conflicts with 'word_wrap'. -# Set to 0 to disable -bounce_freq = 3 -# show age of message if message is older than show_age_threshold seconds. -# set to -1 to disable -show_age_threshold = -1 -# split notifications into multiple lines if they don't fit into geometry -word_wrap = yes -# ignore newlines '\n' in notifications -ignore_newline = no -# The geometry of the message window. -# geometry [{width}]x{height}][+/-{x}+/-{y}] -# The height is measured in number of notifications everything else in pixels. If the width -# is omitted but the height is given ("-geometry x2"), the message window -# expands over the whole screen (dmenu-like). If width is 0, -# the window expands to the longest message displayed. -# A positive x is measured from the left, a negative from the -# right side of the screen. Y is measured from the top and down respectevly. -# The width can be negative. In this case the actual width is the -# screen width minus the width defined in within the geometry option. -#geometry = "410x12-12+12" -#geometry = "0x0-30-30" -geometry = "260x12-30-30" -# The transparency of the window. range: [0; 100] -# This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..) -transparency = 0 -# Don't remove messages, if the user is idle (no mouse or keyboard input) -# for longer than idle_threshold seconds. -# Set to 0 to disable. -idle_threshold = 120 -# Which monitor should the notifications be displayed on. -monitor = 0 -# Display notification on focused monitor. Possible modes are: -# mouse: follow mouse pointer -# keyboard: follow window with keyboard focus -# none: don't follow anything -# -# "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property. -# This should be the case for almost all modern windowmanagers. -# -# If this option is set to mouse or keyboard, the monitor option will be -# ignored. -follow = keyboard -# should a notification popped up from history be sticky or -# timeout as if it would normally do. -sticky_history = yes -# The height of a single line. If the height is smaller than the font height, -# it will get raised to the font height. -# This adds empty space above and under the text. -line_height = 0 - -show_indicators = yes - -# Draw a line of 'separatpr_height' pixel height between two notifications. -# Set to 0 to disable -separator_height = 3 -# padding between text and separator -padding = 8 -# horizontal padding -horizontal_padding = 8 -# Define a color for the separator. -# possible values are: -# * auto: dunst tries to find a color fitting to the background -# * foreground: use the same color as the foreground -# * frame: use the same color as the frame. -# * anything else will be interpreted as a X color -separator_color = foreground -# print a notification on startup -# This is mainly for error detection, since dbus (re-)starts dunst -# automatically after a crash. -startup_notification = false -# dmenu path -#dmenu = /usr/bin/dmenu -p dunst: -dmenu = /usr/bin/rofi -dmenu -p dunst: -# browser for opening urls in context menu -browser = /usr/bin/firefox -new-tab -[frame] -width = 0 -color = "#377222" -[shortcuts] -# shortcuts are specified as [modifier+][modifier+]...key -# available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3' -# and 'mod4' (windows-key) -# xev might be helpful to find names for keys -# close notification -close = ctrl+space -# close all notifications -close_all = ctrl+shift+space -# redisplay last message(s) -# On the US keyboard layout 'grave' is normally above TAB and left of '1'. -history = ctrl+shift+h -# context menu -context = ctrl+shift+period -[urgency_low] -# IMPORTANT: colors have to be defined in quotation marks. -# Otherwise the '#' and following would be interpreted as a comment. -background = "#1d2a30" -foreground = "#71c2af" -timeout = 3 -[urgency_normal] -background = "#1d2a30" -foreground = "#71c2af" -timeout = 0 -[urgency_critical] -background = "#1d2a30" -foreground = "#ff9982" -timeout = 0 - -# Every section that isn't one of the above is interpreted as a rules -# to override settings for certain messages. -# Messages can be matched by 'appname', 'summary', 'body' or 'icon' -# and you can override the 'timeout', 'urgency', 'foreground', 'background' -# and 'format'. -# Shell-like globbing will get expanded. -# -# SCRIPTING -# you can specify a script that gets run when the rule matches by setting -# the 'script' option. -# The script will be called as follows: -# script appname summary body icon urgency -# where urgency can be "LOW", "NORMAL" or "CRITICAL". -# -# NOTE: if you don't want a notification to be displayed, set the format to "" -# NOTE: It might be helpful to run dunst -print in a terminal in order to find -# fitting options for rules. -#[espeak] -# summary = "*" -# script = dunst_espeak.sh -#[script-test] -# summary = "*script*" -# script = dunst_test.sh -#[ignore] -## This notification will not be displayed -# summary = "foobar" -# format = "" -#[signed_on] -# appname = Pidgin -# summary = "*signed on*" -# urgency = low -# -#[signed_off] -# appname = Pidgin -# summary = *signed off* -# urgency = low -# -#[says] -# appname = Pidgin -# summary = *says* -# urgency = critical -# -#[twitter] -# appname = Pidgin -# summary = *twitter.com* -# urgency = normal -# -[xfpm-backlight] - summary = *Brightness* - urgency = low -#+end_src +#[pcr-testing] +#Include = /etc/pacman.d/mirrorlist -** Fontconfig -:PROPERTIES: -:header-args+: :tangle ~/.config/fontconfig/fonts.conf -:END: +[pcr] +Include = /etc/pacman.d/mirrorlist -#+begin_src xml - - - - - - rgb - - - - - true - - - - - hintslight - - - - - true - - - - - lcddefault - - - ~/.fonts - - - - Helvetica - - Liberation Sans - - - -#+end_src +# If you want to run 32 bit applications on your x86_64 system, +# enable the libre-multilib, multilib and pcr-multilib repositories as required here. -** Git +#[nonprism-multilib-testing] +#Include = /etc/pacman.d/mirrorlist -*** gitconfig -:PROPERTIES: -:header-args+: :tangle ~/.gitconfig -:END: +#[nonprism-multilib] +#Include = /etc/pacman.d/mirrorlist -**** user -#+begin_src conf -[user] - name = Amin Bandali - email = amin@aminb.org - # signingkey = 4E05246AB0BF7FFB -#+end_src +#[libre-multilib-testing] +#Include = /etc/pacman.d/mirrorlist -**** signing -#+begin_src conf -# [commit] -# gpgsign = true -# [format] -# signoff = true -#+end_src +#[libre-multilib] +#Include = /etc/pacman.d/mirrorlist -**** core -#+begin_src conf -[core] - autocrlf = input # CRLF -> LF on commit - editor = emacsclient -t - excludesfile = ~/.gitignore_global - pager = "less" -#+end_src +#[multilib-testing] +#Include = /etc/pacman.d/mirrorlist -**** gpg -#+begin_src conf -[gpg] - program = gpg2 -#+end_src +#[multilib] +#Include = /etc/pacman.d/mirrorlist -**** alias -#+begin_src conf -[alias] - git = !exec git # handle nested git calls, e.g. git git status - aliases = config --get-regexp '^alias\\.' - a = add - s = status - sl = status --long - c = checkout - cb = checkout -b - b = branch - r = rebase - p = pull - pr = pull --rebase - ps = push - psf = push --force -#+end_src +#[pcr-multilib-testing] +#Include = /etc/pacman.d/mirrorlist -**** color -#+begin_src conf -[color] - ui = auto -[color "status"] - added = green bold - changed = red bold - untracked = red bold -[color "branch"] - current = green bold - remote = magenta bold -[color "diff"] - new = green bold - old = red bold +#[pcr-multilib] +#Include = /etc/pacman.d/mirrorlist + +# Parabola also supports another community projects and personal repositories, to +# find them check out this wiki page: https://wiki.parabola.nu/Repositories + +# An example of a custom package repository. See the pacman manpage for +# tips on creating your own repositories. +#[custom] +#SigLevel = Optional TrustAll +#Server = file:///home/custompkgs + +Include = /etc/pacman.d/*.conf #+end_src -**** status -#+begin_src conf -[status] - # showUntrackedFiles = all - short=true - branch=true +*** mirrorlist + +#+begin_src conf :tangle /sudo::/etc/pacman.d/mirrorlist :comments none +# Parabola GNU/Linux-libre - Last Updated: Wed Dec 20 02:59:35 GMT 2017 + +Server = http://mirror.fsf.org/parabola/$repo/os/$arch +Server = http://mirror.fsf.org/parabola/$repo/os/$arch +Server = http://mirror.fsf.org/parabola/$repo/os/$arch +Server = http://mirror.fsf.org/parabola/$repo/os/$arch + +# Location: London, UK +# Responsible: Parabola Project +# Note: Not really a mirror, automatically redirects you to an Arch +# mirror when possible. Works best specifying it a few times in a +# row (404s workaround). +# Server = http://redirector.parabola.nu/$repo/os/$arch +Server = https://redirector.parabola.nu/$repo/os/$arch + +# Location: Reykjavík, Iceland +# Responsible: Parabola Project +# Note: Not really a mirror, automatically redirects you to a Parabola +# mirror that has the file you are looking for. +# Server = http://repomirror.parabola.nu/$repo/os/$arch +Server = https://repomirror.parabola.nu/$repo/os/$arch + +# Location: Falkenstein, Germany +# Server = http://mirror.grapentin.org/parabola/$repo/os/$arch +Server = https://mirror.grapentin.org/parabola/$repo/os/$arch + +# Location: Volendam, Netherlands +Server = https://jeweet.net/repo/parabola/$repo/os/$arch + +# Location: Amsterdam, Netherlands +# Note: Not really a mirror, but a high-speed 10GiB cache for +# mirror.yandex.ru/mirrors/parabola +# Server = http://parabola.isacdaavid.info:8080/$repo/os/$arch +Server = https://parabola.isacdaavid.info:8081/$repo/os/$arch + +# Location: Moscow, Russian Federation +# Server = http://mirror.yandex.ru/mirrors/parabola/$repo/os/$arch +Server = https://mirror.yandex.ru/mirrors/parabola/$repo/os/$arch + +# Location: Ho Chi Minh City, Vietnam +# Server = http://mirror.freedif.org/Parabola/$repo/os/$arch +Server = https://mirror.freedif.org/Parabola/$repo/os/$arch + +# Location: Los Angeles, CA, USA +# Note: Also visit http://alfplayer.com/ for its SNAPSHOTS ARCHIVE +Server = http://alfplayer.com/parabola/$repo/os/$arch + +# Location: Boston, MA, USA +Server = http://mirror.fsf.org/parabola/$repo/os/$arch + +# Location: Austin, TX, USA +# Server = http://parabola.serverpit.com/ +Server = https://parabola.serverpit.com/ + +# Location: Reykjavík, Iceland +# Responsible: Parabola Project +# Note: Currently pointing to repomirror.parabola.nu +# Server = http://repo.parabola.nu/$repo/os/$arch +Server = https://repo.parabola.nu/$repo/os/$arch #+end_src -**** github +** pigeonhole +*** amin.sieve +:PROPERTIES: +:header-args+: :tangle ~/mail/bndl.org/amin/sieve/amin.sieve :comments none +:END: + #+begin_src conf -[github] - user = aminb +require ["regex", "variables", "fileinto", "envelope", + "mailbox", "imap4flags", "include"]; + +# webmasters +if anyof ( + address :is "from" ["webmasters@gnu.org", "webmasters-comment@gnu.org"]) { + fileinto :create "gnu.webmasters"; + stop; +} + +include :personal "lists"; #+end_src -*** gitignore +*** lists.sieve :PROPERTIES: -:header-args+: :tangle ~/.gitignore_global +:header-args+: :tangle ~/mail/bndl.org/amin/sieve/lists.sieve :comments none :END: #+begin_src conf -*.orig -*.py[co] -*.sublime-workspace -*~ -.DS_Store -*.elc -*-autoloads.el +require ["regex", "variables", "fileinto", "envelope", + "mailbox", "imap4flags", "include"]; + +# mailing lists +if anyof ( + header :contains "list-id" + [ "" + , "" + , "" + , "" + , "" + , "" + , "" + , "" + , "" + , "" + , "" + , "" + , "" + , "" + , "" + ] ) { + if header :regex "list-id" "<([a-z_0-9-]+)[.@]" { + set :lower "listname" "${1}"; + fileinto :create "gnu.${listname}"; + stop; + } +} + +# sr.ht lists, with dots ('.') omitted +if anyof ( + header :contains "list-id" + [ "<~bandali/public-inbox@lists.sr.ht>" + , "<~sircmpwn/sr.ht-admins@lists.sr.ht>" + , "<~sircmpwn/sr.ht-announce@lists.sr.ht>" + , "<~sircmpwn/sr.ht-dev@lists.sr.ht>" + , "<~sircmpwn/sr.ht-discuss@lists.sr.ht>" + ] ) { + if header :regex "list-id" "(~[a-z_0-9-]+)/([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)@" { + set :lower "username" "${1}"; + set :lower "listname" "${2}${3}${4}${5}${6}${7}"; + fileinto :create "gnu.${username}.${listname}"; + stop; + } +} #+end_src -** Latexmk +** PowerTOP :PROPERTIES: -:header-args+: :tangle ~/.latexmkrc +:header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service" :END: #+begin_src conf -$pdf_previewer = "start zathura %O %S"; -$clean_ext = "aux out"; +[Unit] +Description=Powertop tunings -# $pdf_update_method = 4; -# $pdf_update_command = "zathura %O %S"; +[Service] +ExecStart=/usr/bin/powertop --auto-tune +RemainAfterExit=true -# Synctex allows one to jump to from the PDF in Zathura to the source in Emacs -# by Ctrl+click in the PDF. -# Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex -# editor. -# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S'; +[Install] +WantedBy=multi-user.target #+end_src -* Scripts - -This section contains various useful scripts and the ones used by the -programs above. For instance, =toggle-tablet= for switching to and -from tablet mode on my X220T, =toggle-presentation-mode= for toggling -Xfce's presentation mode which keeps the screen awake, and -=rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an -exact brightness value. - -** rofi-light +** redshift :PROPERTIES: -:header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash" +:header-args+: :tangle ~/.config/redshift.conf :comments none :END: -#+begin_src bash -cur=$(light -G) -val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 8) -light -S $val +#+begin_src conf +; Global settings for redshift +[redshift] +; Set the day and night screen temperatures (Neutral is 6500K) +;temp-day=5700 +;temp-night=3500 + +;temp-day=6500 +temp-day=6200 +;temp-night=4800 +;temp-night=5000 +;temp-night=4500 +temp-night=4000 + +; Enable/Disable a smooth transition between day and night +; 0 will cause a direct change from day to night screen temperature. +; 1 will gradually increase or decrease the screen temperature. +transition=1 + +; Set the screen brightness. Default is 1.0. +;brightness=0.9 +; It is also possible to use different settings for day and night +; since version 1.8. +;brightness-day=0.7 +;brightness-night=0.4 +; Set the screen gamma (for all colors, or each color channel +; individually) +;gamma=0.8 +;gamma=1.0 +;gamma=0.8:0.7:0.8 +; This can also be set individually for day and night since +; version 1.10. +;gamma-day=0.8:0.7:0.8 +;gamma-night=0.6 + +; Set the location-provider: 'geoclue2' or 'manual' +; type 'redshift -l list' to see possible values. +; The location provider settings are in a different section. +;location-provider=manual +location-provider=geoclue2 + +; Set the adjustment-method: 'randr', 'vidmode' +; type 'redshift -m list' to see all possible values. +; 'randr' is the preferred method, 'vidmode' is an older API. +; but works in some cases when 'randr' does not. +; The adjustment method settings are in a different section. +adjustment-method=randr + +; Configuration of the location-provider: +; type 'redshift -l PROVIDER:help' to see the settings. +; ex: 'redshift -l manual:help' +; Keep in mind that longitudes west of Greenwich (e.g. the Americas) +; are negative numbers. +;[manual] +;lat=48.1 +;lon=11.6 + +; Configuration of the adjustment-method +; type 'redshift -m METHOD:help' to see the settings. +; ex: 'redshift -m randr:help' +; In this example, randr is configured to adjust screen 1. +; Note that the numbering starts from 0, so this is actually the +; second screen. If this option is not specified, Redshift will try +; to adjust _all_ screens. +;[randr] +;screen=1 #+end_src -** toggle-layout -:PROPERTIES: -:header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash" -:END: +** systemd -#+begin_src bash -lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)" +Keep boot messages on tty1 (see [[https://wiki.archlinux.org/index.php/getty#Have_boot_messages_stay_on_tty1][here]]) -if [ "$lang" = "us" ]; then - setxkbmap ir -else - setxkbmap us - # xmodmap $HOME/.Xmodmap -fi +#+begin_src conf :tangle /sudo::/etc/systemd/system/getty@tty1.service.d/noclear.conf +[Service] +TTYVTDisallocate=no #+end_src -** toggle-presentation-mode -:PROPERTIES: -:header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash" -:END: +** TLP + +*** langa + +#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "langa")) "/sudo::/etc/default/tlp") +# ------------------------------------------------------------------------------ +# tlp - Parameters for power saving +# See full explanation: https://linrunner.de/en/tlp/docs/tlp-configuration.html + +# Notes: +# - Some parameters are disabled, remove the leading '#' to enable # them; +# shown values are suggestions not defaults +# - Default *: intrinsic default that is effective when the parameter is missing +# or disabled by a leading '#'; use PARAM="" to disable intrinsic defaults for +# parameters with text string values +# - Default : do nothing or use kernel/hardware defaults + +# Set to 0 to disable, 1 to enable TLP. +# Default: 0 +TLP_ENABLE=1 + +# Operation mode when no power supply can be detected: AC, BAT. +# Concerns some desktop and embedded hardware only. +# Default: +TLP_DEFAULT_MODE=AC + +# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE +# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC. +# Default: 0 +TLP_PERSISTENT_DEFAULT=0 + +# Seconds laptop mode has to wait after the disk goes idle before doing a sync. +# Non-zero value enables, zero disables laptop mode. +# Default: 0 (AC), 2 (BAT) +DISK_IDLE_SECS_ON_AC=0 +DISK_IDLE_SECS_ON_BAT=2 + +# Dirty page values (timeouts in secs). +# Default: 15 (AC + BAT) +MAX_LOST_WORK_SECS_ON_AC=15 +MAX_LOST_WORK_SECS_ON_BAT=60 + +# Note: CPU parameters below are disabled by default, remove the leading # +# to enable them, otherwise kernel defaults will be used. + +# Select a CPU frequency scaling governor. +# Intel Core i processor with intel_pstate driver: +# powersave(*), performance. +# Older hardware with acpi-cpufreq driver: +# ondemand(*), powersave, performance, conservative, schedutil. +# (*) is recommended. +# Use tlp-stat -p to show the active driver and available governors. +# Important: +# powersave for intel_pstate and ondemand for acpi-cpufreq are power +# efficient for *almost all* workloads and therefore kernel and most +# distributions have chosen them as defaults. If you still want to change, +# you should know what you're doing! You *must* disable your distribution's +# governor settings or conflicts will occur. +# Default: +#CPU_SCALING_GOVERNOR_ON_AC=powersave +#CPU_SCALING_GOVERNOR_ON_BAT=powersave + +# Set the min/max frequency available for the scaling governor. +# Possible values depend on your CPU. For available frequencies see +# the output of tlp-stat -p. +# Default: +#CPU_SCALING_MIN_FREQ_ON_AC=0 +#CPU_SCALING_MAX_FREQ_ON_AC=0 +#CPU_SCALING_MIN_FREQ_ON_BAT=0 +#CPU_SCALING_MAX_FREQ_ON_BAT=0 + +# Set energy performance hints (HWP) for Intel P-state governor: +# performance, balance_performance, default, balance_power, power +# Values are given in order of increasing power saving. +# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required. +# Default: +CPU_HWP_ON_AC=balance_performance +CPU_HWP_ON_BAT=balance_power + +# Set Intel P-state performance: 0..100 (%). +# Limit the max/min P-state to control the power dissipation of the CPU. +# Values are stated as a percentage of the available performance. +# Requires an Intel Core i processor with intel_pstate driver. +# Default: +#CPU_MIN_PERF_ON_AC=0 +#CPU_MAX_PERF_ON_AC=100 +#CPU_MIN_PERF_ON_BAT=0 +#CPU_MAX_PERF_ON_BAT=30 + +# Set the CPU "turbo boost" feature: 0=disable, 1=allow +# Requires an Intel Core i processor. +# Important: +# - This may conflict with your distribution's governor settings +# - A value of 1 does *not* activate boosting, it just allows it +# Default: +#CPU_BOOST_ON_AC=1 +#CPU_BOOST_ON_BAT=0 + +# Minimize number of used CPU cores/hyper-threads under light load conditions: +# 0=disable, 1=enable. +# Default: +SCHED_POWERSAVE_ON_AC=0 +SCHED_POWERSAVE_ON_BAT=1 + +# Kernel NMI Watchdog: +# 0=disable (default, saves power), 1=enable (for kernel debugging only). +# Default: +NMI_WATCHDOG=0 + +# Change CPU voltages aka "undervolting" - Kernel with PHC patch required. +# Frequency voltage pairs are written to: +# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls +# CAUTION: only use this, if you thoroughly understand what you are doing! +# Default: . +#PHC_CONTROLS="F:V F:V F:V F:V" + +# Set CPU performance versus energy savings policy: +# performance, balance-performance, default, balance-power, power. +# Values are given in order of increasing power saving. +# Requires kernel module msr and x86_energy_perf_policy from linux-tools. +# Default: +ENERGY_PERF_POLICY_ON_AC=performance +ENERGY_PERF_POLICY_ON_BAT=balance-power + +# Disk devices; separate multiple devices with spaces. +# Devices can be specified by disk ID also (lookup with: tlp diskid). +# Note: DISK parameters below are effective only when this option is configured. +# Default: "nvme0n1 sda" +DISK_DEVICES="sda sdb" + +# Disk advanced power management level: 1..254, 255 (max saving, min, off). +# Levels 1..127 may spin down the disk; 255 allowable on most drives. +# Separate values for multiple disks with spaces. Use the special value 'keep' +# to keep the hardware default for the particular disk. +# Default: +DISK_APM_LEVEL_ON_AC="254 254" +DISK_APM_LEVEL_ON_BAT="128 128" + +# Hard disk spin down timeout: +# 0: spin down disabled +# 1..240: timeouts from 5s to 20min (in units of 5s) +# 241..251: timeouts from 30min to 5.5 hours (in units of 30min) +# See 'man hdparm' for details. +# Separate values for multiple disks with spaces. Use the special value 'keep' +# to keep the hardware default for the particular disk. +# Default: +#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0" +#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0" + +# Select I/O scheduler for the disk devices. +# Multi queue (blk-mq) schedulers: +# mq-deadline(*), none, kyber, bfq +# Single queue schedulers: +# deadline(*), cfq, bfq, noop +# (*) recommended. +# Separate values for multiple disks with spaces. Use the special value 'keep' +# to keep the kernel default scheduler for the particular disk. +# Notes: +# - Multi queue (blk-mq) may need kernel boot option 'scsi_mod.use_blk_mq=1' +# and 'modprobe mq-deadline-iosched|kyber|bfq' on kernels < 5.0 +# - Single queue schedulers are legacy now and were removed together with +# the old block layer in kernel 5.0 +# Default: keep +#DISK_IOSCHED="mq-deadline mq-deadline" + +# AHCI link power management (ALPM) for disk devices: +# min_power, med_power_with_dipm(*), medium_power, max_performance. +# (*) Kernel >= 4.15 required, then recommended. +# Multiple values separated with spaces are tried sequentially until success. +# Default: +SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance" +SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power" + +# Exclude host devices from AHCI link power management. +# Separate multiple hosts with spaces. +# Default: +#SATA_LINKPWR_BLACKLIST="host1" + +# Runtime Power Management for AHCI host and disks devices: +# on=disable, auto=enable. +# EXPERIMENTAL ** WARNING: auto may cause system lockups/data loss. +# Default: +#AHCI_RUNTIME_PM_ON_AC=on +#AHCI_RUNTIME_PM_ON_BAT=on + +# Seconds of inactivity before disk is suspended. +# Note: effective only when AHCI_RUNTIME_PM_ON_AC/BAT is activated. +# Default: 15 +AHCI_RUNTIME_PM_TIMEOUT=15 + +# PCI Express Active State Power Management (PCIe ASPM): +# default(*), performance, powersave. +# (*) keeps BIOS ASPM defaults (recommended) +# Default: +#PCIE_ASPM_ON_AC=default +#PCIE_ASPM_ON_BAT=default + +# Set the min/max/turbo frequency for the Intel GPU. +# Possible values depend on your hardware. For available frequencies see +# the output of tlp-stat -g. +# Default: +#INTEL_GPU_MIN_FREQ_ON_AC=0 +#INTEL_GPU_MIN_FREQ_ON_BAT=0 +#INTEL_GPU_MAX_FREQ_ON_AC=0 +#INTEL_GPU_MAX_FREQ_ON_BAT=0 +#INTEL_GPU_BOOST_FREQ_ON_AC=0 +#INTEL_GPU_BOOST_FREQ_ON_BAT=0 + +# Radeon graphics clock speed (profile method): low, mid, high, auto, default; +# auto = mid on BAT, high on AC. +# Default: default +RADEON_POWER_PROFILE_ON_AC=default +RADEON_POWER_PROFILE_ON_BAT=default + +# Radeon dynamic power management method (DPM): battery, performance. +# Default: +RADEON_DPM_STATE_ON_AC=performance +RADEON_DPM_STATE_ON_BAT=battery + +# Radeon DPM performance level: auto, low, high; auto is recommended. +# Note: effective only when RADEON_DPM_STATE_ON_AC/BAT is activated. +# Default: auto +RADEON_DPM_PERF_LEVEL_ON_AC=auto +RADEON_DPM_PERF_LEVEL_ON_BAT=auto + +# WiFi power saving mode: on=enable, off=disable; not supported by all adapters. +# Default: +WIFI_PWR_ON_AC=off +WIFI_PWR_ON_BAT=on + +# Disable wake on LAN: Y/N. +# Default: N +WOL_DISABLE=Y + +# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs). +# A value of 0 disables, >=1 enables power saving (recommended: 1). +# Default: +SOUND_POWER_SAVE_ON_AC=0 +SOUND_POWER_SAVE_ON_BAT=0 + +# Disable controller too (HDA only): Y/N. +# Note: effective only when SOUND_POWER_SAVE_ON_AC/BAT is activated. +# Default: Y +SOUND_POWER_SAVE_CONTROLLER=N + +# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable. +# Drive can be powered on again by releasing (and reinserting) the eject lever +# or by pressing the disc eject button on newer models. +# Note: an UltraBay/MediaBay hard disk is never powered off. +# Default: 0 +BAY_POWEROFF_ON_AC=0 +BAY_POWEROFF_ON_BAT=0 +# Optical drive device to power off +# Default: sr0 +BAY_DEVICE="sr0" + +# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable. +# Default: +RUNTIME_PM_ON_AC=on +RUNTIME_PM_ON_BAT=auto + +# Exclude PCI(e) device adresses the following list from Runtime PM +# (separate with spaces). Use lspci to get the adresses (1st column). +# Default: +#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6" + +# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM. +# Default when unconfigured is "amdgpu nouveau nvidia radeon" which +# prevents accidential power-on of dGPU in hybrid graphics setups. +# Separate multiple drivers with spaces. +# Default: "amdgpu mei_me nouveau nvidia pcieport radeon", use "" to disable +# completely. +#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu mei_me nouveau nvidia pcieport radeon" + +# Set to 0 to disable, 1 to enable USB autosuspend feature. +# Default: 0 +USB_AUTOSUSPEND=1 + +# Exclude listed devices from USB autosuspend (separate with spaces). +# Use lsusb to get the ids. +# Note: input devices (usbhid) are excluded automatically +# Default: +#USB_BLACKLIST="1111:2222 3333:4444" + +# Bluetooth devices are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude. +# Default: 0 +USB_BLACKLIST_BTUSB=0 + +# Phone devices are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude (enable charging). +# Default: 0 +USB_BLACKLIST_PHONE=0 + +# Printers are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude. +# Default: 1 +USB_BLACKLIST_PRINTER=1 + +# WWAN devices are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude. +# Default: 0 +USB_BLACKLIST_WWAN=0 + +# Include listed devices into USB autosuspend even if already excluded +# by the blacklists above (separate with spaces). Use lsusb to get the ids. +# Default: +#USB_WHITELIST="1111:2222 3333:4444" + +# Set to 1 to disable autosuspend before shutdown, 0 to do nothing +# (workaround for USB devices that cause shutdown problems). +# Default: 0 +#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1 + +# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown +# on system startup: 0=disable, 1=enable. +# Note: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below +# are ignored when this is enabled. +# Default: 0 +#RESTORE_DEVICE_STATE_ON_STARTUP=0 +RESTORE_DEVICE_STATE_ON_STARTUP=1 + +# Radio devices to disable on startup: bluetooth, wifi, wwan. +# Separate multiple devices with spaces. +# Default: +#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan" + +# Radio devices to enable on startup: bluetooth, wifi, wwan. +# Separate multiple devices with spaces. +# Default: +#DEVICES_TO_ENABLE_ON_STARTUP="wifi" + +# Radio devices to disable on shutdown: bluetooth, wifi, wwan. +# (workaround for devices that are blocking shutdown). +# Default: +#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan" + +# Radio devices to enable on shutdown: bluetooth, wifi, wwan. +# (to prevent other operating systems from missing radios). +# Default: +#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan" + +# Radio devices to enable on AC: bluetooth, wifi, wwan. +# Default: +#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan" + +# Radio devices to disable on battery: bluetooth, wifi, wwan. +# Default: +#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan" +DEVICES_TO_DISABLE_ON_BAT="bluetooth" + +# Radio devices to disable on battery when not in use (not connected): +# bluetooth, wifi, wwan. +# Default: +#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan" + +# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module +# required). Charging starts when the remaining capacity falls below the +# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value. +# Main / Internal battery (values in %) +# Default: +#START_CHARGE_THRESH_BAT0=75 +#STOP_CHARGE_THRESH_BAT0=80 +# Ultrabay / Slice / Replaceable battery (values in %) +# Default: +#START_CHARGE_THRESH_BAT1=75 +#STOP_CHARGE_THRESH_BAT1=80 + +# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable. +# Default: 0 +#RESTORE_THRESHOLDS_ON_BAT=1 + +# Battery feature drivers: 0=disable, 1=enable +# Default: 1 (all) +NATACPI_ENABLE=1 +TPACPI_ENABLE=1 +TPSMAPI_ENABLE=1 + +# ------------------------------------------------------------------------------ +# tlp-rdw - Parameters for the radio device wizard +# Possible devices: bluetooth, wifi, wwan. + +# Notes: +# - Parameters are disabled by default, remove the leading # to enable them +# - Separate multiple radio devices with spaces + +# Default: (for all parameters below) + +# Radio devices to disable on connect. +#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan" +#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan" +#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi" + +# Radio devices to enable on disconnect. +#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan" +#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT="" +#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT="" + +# Radio devices to enable/disable when docked. +#DEVICES_TO_ENABLE_ON_DOCK="" +#DEVICES_TO_DISABLE_ON_DOCK="" + +# Radio devices to enable/disable when undocked. +#DEVICES_TO_ENABLE_ON_UNDOCK="wifi" +#DEVICES_TO_DISABLE_ON_UNDOCK="" +#+end_src -#+begin_src bash -xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T +*** shemshak + +#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "shemshak")) "/sudo::/etc/default/tlp") +# ------------------------------------------------------------------------------ +# tlp - Parameters for power saving +# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html + +# Hint: some features are disabled by default, remove the leading # to enable +# them. + +# Set to 0 to disable, 1 to enable TLP. +TLP_ENABLE=1 + +# Operation mode when no power supply can be detected: AC, BAT. +# Concerns some desktop and embedded hardware only. +TLP_DEFAULT_MODE=AC + +# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE +# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC. +TLP_PERSISTENT_DEFAULT=0 + +# Seconds laptop mode has to wait after the disk goes idle before doing a sync. +# Non-zero value enables, zero disables laptop mode. +DISK_IDLE_SECS_ON_AC=0 +DISK_IDLE_SECS_ON_BAT=2 + +# Dirty page values (timeouts in secs). +MAX_LOST_WORK_SECS_ON_AC=15 +MAX_LOST_WORK_SECS_ON_BAT=60 + +# Hint: CPU parameters below are disabled by default, remove the leading # +# to enable them, otherwise kernel default values are used. + +# Select a CPU frequency scaling governor. +# Intel Core i processor with intel_pstate driver: +# powersave(*), performance. +# Older hardware with acpi-cpufreq driver: +# ondemand(*), powersave, performance, conservative, schedutil. +# (*) is recommended. +# Hint: use tlp-stat -p to show the active driver and available governors. +# Important: +# powersave for intel_pstate and ondemand for acpi-cpufreq are power +# efficient for *almost all* workloads and therefore kernel and most +# distributions have chosen them as defaults. If you still want to change, +# you should know what you're doing! You *must* disable your distribution's +# governor settings or conflicts will occur. +#CPU_SCALING_GOVERNOR_ON_AC=powersave +#CPU_SCALING_GOVERNOR_ON_BAT=powersave + +# Set the min/max frequency available for the scaling governor. +# Possible values strongly depend on your CPU. For available frequencies see +# the output of tlp-stat -p. +#CPU_SCALING_MIN_FREQ_ON_AC=0 +#CPU_SCALING_MAX_FREQ_ON_AC=0 +#CPU_SCALING_MIN_FREQ_ON_BAT=0 +#CPU_SCALING_MAX_FREQ_ON_BAT=0 + +# Set energy performance hints (HWP) for Intel P-state governor: +# performance, balance_performance, default, balance_power, power +# Values are given in order of increasing power saving. +# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required. +CPU_HWP_ON_AC=balance_performance +CPU_HWP_ON_BAT=balance_power + +# Set Intel P-state performance: 0..100 (%). +# Limit the max/min P-state to control the power dissipation of the CPU. +# Values are stated as a percentage of the available performance. +# Requires an Intel Core i processor with intel_pstate driver. +#CPU_MIN_PERF_ON_AC=0 +#CPU_MAX_PERF_ON_AC=100 +#CPU_MIN_PERF_ON_BAT=0 +#CPU_MAX_PERF_ON_BAT=30 + +# Set the CPU "turbo boost" feature: 0=disable, 1=allow +# Requires an Intel Core i processor. +# Important: +# - This may conflict with your distribution's governor settings +# - A value of 1 does *not* activate boosting, it just allows it +#CPU_BOOST_ON_AC=1 +#CPU_BOOST_ON_BAT=0 + +# Minimize number of used CPU cores/hyper-threads under light load conditions: +# 0=disable, 1=enable. +SCHED_POWERSAVE_ON_AC=0 +SCHED_POWERSAVE_ON_BAT=1 + +# Kernel NMI Watchdog: +# 0=disable (default, saves power), 1=enable (for kernel debugging only). +NMI_WATCHDOG=0 + +# Change CPU voltages aka "undervolting" - Kernel with PHC patch required. +# Frequency voltage pairs are written to: +# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls +# CAUTION: only use this, if you thoroughly understand what you are doing! +#PHC_CONTROLS="F:V F:V F:V F:V" + +# Set CPU performance versus energy savings policy: +# performance, balance-performance, default, balance-power, power. +# Values are given in order of increasing power saving. +# Requires kernel module msr and x86_energy_perf_policy from linux-tools. +ENERGY_PERF_POLICY_ON_AC=performance +ENERGY_PERF_POLICY_ON_BAT=balance-power + +# Disk devices; separate multiple devices with spaces (default: sda). +# Devices can be specified by disk ID also (lookup with: tlp diskid). +DISK_DEVICES="sda sdb" + +# Disk advanced power management level: 1..254, 255 (max saving, min, off). +# Levels 1..127 may spin down the disk; 255 allowable on most drives. +# Separate values for multiple disks with spaces. Use the special value 'keep' +# to keep the hardware default for the particular disk. +DISK_APM_LEVEL_ON_AC="254 254" +DISK_APM_LEVEL_ON_BAT="128 128" + +# Hard disk spin down timeout: +# 0: spin down disabled +# 1..240: timeouts from 5s to 20min (in units of 5s) +# 241..251: timeouts from 30min to 5.5 hours (in units of 30min) +# See 'man hdparm' for details. +# Separate values for multiple disks with spaces. Use the special value 'keep' +# to keep the hardware default for the particular disk. +#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0" +#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0" + +# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq). +# Separate values for multiple disks with spaces. Use the special value 'keep' +# to keep the kernel default scheduler for the particular disk. +#DISK_IOSCHED="cfq cfq" + +# AHCI link power management (ALPM) for disk devices: +# min_power, med_power_with_dipm(*), medium_power, max_performance. +# (*) Kernel >= 4.15 required, then recommended. +# Multiple values separated with spaces are tried sequentially until success. +SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance" +SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power" + +# Exclude host devices from AHCI link power management. +# Separate multiple hosts with spaces. +#SATA_LINKPWR_BLACKLIST="host1" + +# Runtime Power Management for AHCI host and disks devices: +# on=disable, auto=enable. +# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss. +#AHCI_RUNTIME_PM_ON_AC=on +#AHCI_RUNTIME_PM_ON_BAT=on + +# Seconds of inactivity before disk is suspended. +AHCI_RUNTIME_PM_TIMEOUT=15 + +# PCI Express Active State Power Management (PCIe ASPM): +# default, performance, powersave. +PCIE_ASPM_ON_AC=performance +PCIE_ASPM_ON_BAT=powersave + +# Radeon graphics clock speed (profile method): low, mid, high, auto, default; +# auto = mid on BAT, high on AC; default = use hardware defaults. +RADEON_POWER_PROFILE_ON_AC=high +RADEON_POWER_PROFILE_ON_BAT=low + +# Radeon dynamic power management method (DPM): battery, performance. +RADEON_DPM_STATE_ON_AC=performance +RADEON_DPM_STATE_ON_BAT=battery + +# Radeon DPM performance level: auto, low, high; auto is recommended. +RADEON_DPM_PERF_LEVEL_ON_AC=auto +RADEON_DPM_PERF_LEVEL_ON_BAT=auto + +# WiFi power saving mode: on=enable, off=disable; not supported by all adapters. +WIFI_PWR_ON_AC=off +WIFI_PWR_ON_BAT=on + +# Disable wake on LAN: Y/N. +WOL_DISABLE=Y + +# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs). +# A value of 0 disables, >=1 enables power saving (recommended: 1). +SOUND_POWER_SAVE_ON_AC=0 +SOUND_POWER_SAVE_ON_BAT=0 + +# Disable controller too (HDA only): Y/N. +SOUND_POWER_SAVE_CONTROLLER=N + +# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable. +# Drive can be powered on again by releasing (and reinserting) the eject lever +# or by pressing the disc eject button on newer models. +# Note: an UltraBay/MediaBay hard disk is never powered off. +BAY_POWEROFF_ON_AC=0 +BAY_POWEROFF_ON_BAT=0 +# Optical drive device to power off (default sr0). +BAY_DEVICE="sr0" + +# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable. +RUNTIME_PM_ON_AC=on +RUNTIME_PM_ON_BAT=auto + +# Exclude PCI(e) device adresses the following list from Runtime PM +# (separate with spaces). Use lspci to get the adresses (1st column). +#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6" +RUNTIME_PM_BLACKLIST="01:00.0" + +# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM. +# Default when unconfigured is "amdgpu nouveau nvidia radeon" which +# prevents accidential power-on of dGPU in hybrid graphics setups. +# Use "" to disable the feature completely. +# Separate multiple drivers with spaces. +#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon" + +# Set to 0 to disable, 1 to enable USB autosuspend feature. +USB_AUTOSUSPEND=1 + +# Exclude listed devices from USB autosuspend (separate with spaces). +# Use lsusb to get the ids. +# Note: input devices (usbhid) are excluded automatically +#USB_BLACKLIST="1111:2222 3333:4444" + +# Bluetooth devices are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude. +USB_BLACKLIST_BTUSB=0 + +# Phone devices are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude (enable charging). +USB_BLACKLIST_PHONE=0 + +# Printers are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude. +USB_BLACKLIST_PRINTER=1 + +# WWAN devices are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude. +USB_BLACKLIST_WWAN=1 + +# Include listed devices into USB autosuspend even if already excluded +# by the blacklists above (separate with spaces). +# Use lsusb to get the ids. +#USB_WHITELIST="1111:2222 3333:4444" + +# Set to 1 to disable autosuspend before shutdown, 0 to do nothing +# (workaround for USB devices that cause shutdown problems). +#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1 + +# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown +# on system startup: 0=disable, 1=enable. +# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below +# are ignored when this is enabled! +#RESTORE_DEVICE_STATE_ON_STARTUP=0 +RESTORE_DEVICE_STATE_ON_STARTUP=1 + +# Radio devices to disable on startup: bluetooth, wifi, wwan. +# Separate multiple devices with spaces. +#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan" + +# Radio devices to enable on startup: bluetooth, wifi, wwan. +# Separate multiple devices with spaces. +#DEVICES_TO_ENABLE_ON_STARTUP="wifi" + +# Radio devices to disable on shutdown: bluetooth, wifi, wwan. +# (workaround for devices that are blocking shutdown). +#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan" + +# Radio devices to enable on shutdown: bluetooth, wifi, wwan. +# (to prevent other operating systems from missing radios). +#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan" + +# Radio devices to enable on AC: bluetooth, wifi, wwan. +#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan" + +# Radio devices to disable on battery: bluetooth, wifi, wwan. +#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan" + +# Radio devices to disable on battery when not in use (not connected): +# bluetooth, wifi, wwan. +#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan" + +# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module +# required). Charging starts when the remaining capacity falls below the +# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value. +# Main / Internal battery (values in %) +#START_CHARGE_THRESH_BAT0=75 +#STOP_CHARGE_THRESH_BAT0=80 +# Ultrabay / Slice / Replaceable battery (values in %) +#START_CHARGE_THRESH_BAT1=75 +#STOP_CHARGE_THRESH_BAT1=80 + +# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable. +#RESTORE_THRESHOLDS_ON_BAT=1 + +# ------------------------------------------------------------------------------ +# tlp-rdw - Parameters for the radio device wizard +# Possible devices: bluetooth, wifi, wwan. + +# Hints: +# - Parameters are disabled by default, remove the leading # to enable them +# - Separate multiple radio devices with spaces + +# Radio devices to disable on connect. +#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan" +#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan" +#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi" + +# Radio devices to enable on disconnect. +#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan" +#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT="" +#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT="" + +# Radio devices to enable/disable when docked. +#DEVICES_TO_ENABLE_ON_DOCK="" +#DEVICES_TO_DISABLE_ON_DOCK="" + +# Radio devices to enable/disable when undocked. +#DEVICES_TO_ENABLE_ON_UNDOCK="wifi" +#DEVICES_TO_DISABLE_ON_UNDOCK="" #+end_src -** Fun :) +** X -*** eat-em +*** xprofile :PROPERTIES: -:header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh" +:header-args+: :tangle ~/.xprofile :END: -#+begin_src sh -# Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921 -# [ESC] character in original post removed here. - -# ANSI Color -- use these variables to easily have different color -# and format output. Make sure to output the reset sequence after -# colors (f = foreground, b = background), and use the 'off' -# feature for anything you turn on. - -initializeANSI() -{ - esc="$(echo -en '\e')" +=~/.xprofile= is similar in style to =~/.xinitrc=, but on the +contrary, it's automatically sourced by LightDM, my display manager of +choice. - blackf="${esc}[30m"; redf="${esc}[31m"; greenf="${esc}[32m" - yellowf="${esc}[33m" bluef="${esc}[34m"; purplef="${esc}[35m" - cyanf="${esc}[36m"; whitef="${esc}[37m" +#+begin_src sh :tangle no +xset -b # disable bell +xset r rate 200 45 # repeat delay (ms) and rate (repeats/sec) - blackb="${esc}[40m"; redb="${esc}[41m"; greenb="${esc}[42m" - yellowb="${esc}[43m" blueb="${esc}[44m"; purpleb="${esc}[45m" - cyanb="${esc}[46m"; whiteb="${esc}[47m" +# setxkbmap -option compose:ralt - boldon="${esc}[1m"; boldoff="${esc}[22m" - italicson="${esc}[3m"; italicsoff="${esc}[23m" - ulon="${esc}[4m"; uloff="${esc}[24m" - invon="${esc}[7m"; invoff="${esc}[27m" +setxkbmap -option ctrl:nocaps # turn capslock into control +setxkbmap -option altwin:swap_alt_win # swap alt and super - reset="${esc}[0m" -} - -# note in this first use that switching colors doesn't require a reset -# first - the new color overrides the old one. +if [ $(hostname) = "plasma" ] +then + setxkbmap -option ctrl:rctrl_ralt # turn right control into right alt +fi -#clear +if [ $(hostname) = "enigma" ] +then + xmodmap -e "keycode 135 = Alt_R" # remap menu key to alt +fi -initializeANSI +light -Scrs "intel_backlight" 2 -cat << EOF +source $HOME/.zprofile - ${yellowf} ▄███████▄${reset} ${redf} ▄██████▄${reset} ${greenf} ▄██████▄${reset} ${bluef} ▄██████▄${reset} ${purplef} ▄██████▄${reset} ${cyanf} ▄██████▄${reset} - ${yellowf}▄█████████▀▀${reset} ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset} ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset} ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset} ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset} ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset} - ${yellowf}███████▀${reset} ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset} ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset} ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset} ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset} ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset} - ${yellowf}███████▄${reset} ${redf}████████████${reset} ${greenf}████████████${reset} ${bluef}████████████${reset} ${purplef}████████████${reset} ${cyanf}████████████${reset} - ${yellowf}▀█████████▄▄${reset} ${redf}██▀██▀▀██▀██${reset} ${greenf}██▀██▀▀██▀██${reset} ${bluef}██▀██▀▀██▀██${reset} ${purplef}██▀██▀▀██▀██${reset} ${cyanf}██▀██▀▀██▀██${reset} - ${yellowf} ▀███████▀${reset} ${redf}▀ ▀ ▀ ▀${reset} ${greenf}▀ ▀ ▀ ▀${reset} ${bluef}▀ ▀ ▀ ▀${reset} ${purplef}▀ ▀ ▀ ▀${reset} ${cyanf}▀ ▀ ▀ ▀${reset} +export _JAVA_AWT_WM_NONREPARENTING=1 +export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true' - ${boldon}${yellowf} ▄███████▄ ${redf} ▄██████▄ ${greenf} ▄██████▄ ${bluef} ▄██████▄ ${purplef} ▄██████▄ ${cyanf} ▄██████▄${reset} - ${boldon}${yellowf}▄█████████▀▀ ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄ ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄ ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄ ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄ ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset} - ${boldon}${yellowf}███████▀ ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███ ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███ ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███ ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███ ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset} - ${boldon}${yellowf}███████▄ ${redf}████████████ ${greenf}████████████ ${bluef}████████████ ${purplef}████████████ ${cyanf}████████████${reset} - ${boldon}${yellowf}▀█████████▄▄ ${redf}██▀██▀▀██▀██ ${greenf}██▀██▀▀██▀██ ${bluef}██▀██▀▀██▀██ ${purplef}██▀██▀▀██▀██ ${cyanf}██▀██▀▀██▀██${reset} - ${boldon}${yellowf} ▀███████▀ ${redf}▀ ▀ ▀ ▀ ${greenf}▀ ▀ ▀ ▀ ${bluef}▀ ▀ ▀ ▀ ${purplef}▀ ▀ ▀ ▀ ${cyanf}▀ ▀ ▀ ▀${reset} +if [ $(hostname) = "plasma" ] +then + unlock-def-gk.py & +fi -EOF +bspwm & #+end_src +*** xkb us_ab keyboard layout -*** invade-em -:PROPERTIES: -:header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash" -:END: - -#+begin_src bash -# -# ANSI color scheme script featuring Space Invaders -# -# Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921 -# Modified by lolilolicon -# +#+begin_src conf :tangle "/sudo::/usr/share/X11/xkb/symbols/us_ab" :comments none +default partial alphanumeric_keys +xkb_symbols "us_ab" { + include "us(basic)" + name[Group1]= "English (US)(aminb)"; -f=3 b=4 -for j in f b; do - for i in {0..7}; do - printf -v $j$i %b "\e[${!j}${i}m" - done -done -bld=$'\e[1m' -rst=$'\e[0m' - -cat << EOF - - $f1 ▀▄ ▄▀ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4 ▀▄ ▄▀ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst - $f1 ▄█▀███▀█▄ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4 ▄█▀███▀█▄ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst - $f1█▀███████▀█ $f2▀▀███▀▀███▀▀ $f3▀█▀██▀█▀ $f4█▀███████▀█ $f5▀▀███▀▀███▀▀ $f6▀█▀██▀█▀$rst - $f1▀ ▀▄▄ ▄▄▀ ▀ $f2 ▀█▄ ▀▀ ▄█▀ $f3▀▄ ▄▀ $f4▀ ▀▄▄ ▄▄▀ ▀ $f5 ▀█▄ ▀▀ ▄█▀ $f6▀▄ ▄▀$rst - - $bld$f1▄ ▀▄ ▄▀ ▄ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4▄ ▀▄ ▄▀ ▄ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst - $bld$f1█▄█▀███▀█▄█ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4█▄█▀███▀█▄█ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst - $bld$f1▀█████████▀ $f2▀▀▀██▀▀██▀▀▀ $f3▀▀█▀▀█▀▀ $f4▀█████████▀ $f5▀▀▀██▀▀██▀▀▀ $f6▀▀█▀▀█▀▀$rst - $bld$f1 ▄▀ ▀▄ $f2▄▄▀▀ ▀▀ ▀▀▄▄ $f3▄▀▄▀▀▄▀▄ $f4 ▄▀ ▀▄ $f5▄▄▀▀ ▀▀ ▀▀▄▄ $f6▄▀▄▀▀▄▀▄$rst - - - $f7▌$rst - - $f7▌$rst - - $f7 ▄█▄ $rst - $f7▄█████████▄$rst - $f7▀▀▀▀▀▀▀▀▀▀▀$rst - -EOF + key { [ Alt_R ] }; +}; #+end_src +