X-Git-Url: https://git.shemshak.org/~bandali/configs/blobdiff_plain/58cbbce26dd7afdf798c4a2970ffd7d54f1b3c24..838a9468b8b8274e5f02623c2b4850a1b839132f:/rc.org?ds=sidebyside diff --git a/rc.org b/rc.org index cef6881..6f77a37 100644 --- a/rc.org +++ b/rc.org @@ -11,122 +11,1873 @@ Note: This file is best viewed inside Emacs with org mode. * Configs -** Git +This section contains the configuration files (dotfiles) of various +programs I use. -*** gitconfig +** mpd :PROPERTIES: -:header-args+: :tangle ~/.gitconfig +:header-args+: :tangle ~/.config/mpd/mpd.conf :END: -**** user #+begin_src conf -[user] - name = Amin Bandali - email = amin@aminb.org - # signingkey = 4E05246AB0BF7FFB -#+end_src +# An example configuration file for MPD. +# Read the user manual for documentation: http://www.musicpd.org/doc/user/ -**** signing -#+begin_src conf -# [commit] -# gpgsign = true -# [format] -# signoff = true -#+end_src -**** core -#+begin_src conf -[core] - autocrlf = input # CRLF -> LF on commit - editor = emacsclient -t - excludesfile = ~/.gitignore_global - pager = "less" -#+end_src +# Files and directories ####################################################### +# +# This setting controls the top directory which MPD will search to discover the +# available audio files and add them to the daemon's online database. This +# setting defaults to the XDG directory, otherwise the music directory will be +# be disabled and audio files will only be accepted over ipc socket (using +# file:// protocol) or streaming files over an accepted protocol. +# +music_directory "~/usr/music" +# +# This setting sets the MPD internal playlist directory. The purpose of this +# directory is storage for playlists created by MPD. The server will use +# playlist files not created by the server but only if they are in the MPD +# format. This setting defaults to playlist saving being disabled. +# +playlist_directory "~/.mpd/playlists" +# +# This setting sets the location of the MPD database. This file is used to +# load the database at server start up and store the database while the +# server is not up. This setting defaults to disabled which will allow +# MPD to accept files over ipc socket (using file:// protocol) or streaming +# files over an accepted protocol. +# +db_file "~/.mpd/database" +# +# These settings are the locations for the daemon log files for the daemon. +# These logs are great for troubleshooting, depending on your log_level +# settings. +# +# The special value "syslog" makes MPD use the local syslog daemon. This +# setting defaults to logging to syslog, otherwise logging is disabled. +# +log_file "~/.mpd/log" +# +# This setting sets the location of the file which stores the process ID +# for use of mpd --kill and some init scripts. This setting is disabled by +# default and the pid file will not be stored. +# +pid_file "~/.mpd/pid" +# +# This setting sets the location of the file which contains information about +# most variables to get MPD back into the same general shape it was in before +# it was brought down. This setting is disabled by default and the server +# state will be reset on server start up. +# +state_file "~/.mpd/state" +# +# The location of the sticker database. This is a database which +# manages dynamic information attached to songs. +# +sticker_file "~/.mpd/sticker.sql" +# +############################################################################### -**** gpg -#+begin_src conf -[gpg] - program = gpg2 -#+end_src -**** alias -#+begin_src conf -[alias] - git = !exec git # handle nested git calls, e.g. git git status - aliases = config --get-regexp '^alias\\.' - a = add - s = status - sl = status --long - c = checkout - cb = checkout -b - b = branch - r = rebase - p = pull - pr = pull --rebase - ps = push - psf = push --force +# General music daemon options ################################################ +# +# This setting specifies the user that MPD will run as. MPD should never run as +# root and you may use this setting to make MPD change its user ID after +# initialization. This setting is disabled by default and MPD is run as the +# current user. +# +#user "nobody" +# +# This setting specifies the group that MPD will run as. If not specified +# primary group of user specified with "user" setting will be used (if set). +# This is useful if MPD needs to be a member of group such as "audio" to +# have permission to use sound card. +# +#group "nogroup" +# +# This setting sets the address for the daemon to listen on. Careful attention +# should be paid if this is assigned to anything other then the default, any. +# This setting can deny access to control of the daemon. Not effective if +# systemd socket activiation is in use. +# +# For network +#bind_to_address "any" +# +# And for Unix Socket +#bind_to_address "~/.mpd/socket" +# +# This setting is the TCP port that is desired for the daemon to get assigned +# to. +# +#port "6600" +# +# This setting controls the type of information which is logged. Available +# setting arguments are "default", "secure" or "verbose". The "verbose" setting +# argument is recommended for troubleshooting, though can quickly stretch +# available resources on limited hardware storage. +# +#log_level "default" +# +# If you have a problem with your MP3s ending abruptly it is recommended that +# you set this argument to "no" to attempt to fix the problem. If this solves +# the problem, it is highly recommended to fix the MP3 files with vbrfix +# (available from ), at which +# point gapless MP3 playback can be enabled. +# +#gapless_mp3_playback "yes" +# +# Setting "restore_paused" to "yes" puts MPD into pause mode instead +# of starting playback after startup. +# +#restore_paused "no" +# +# This setting enables MPD to create playlists in a format usable by other +# music players. +# +#save_absolute_paths_in_playlists "no" +# +# This setting defines a list of tag types that will be extracted during the +# audio file discovery process. The complete list of possible values can be +# found in the user manual. +#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc" +# +# This setting enables automatic update of MPD's database when files in +# music_directory are changed. +# +#auto_update "yes" +# +# Limit the depth of the directories being watched, 0 means only watch +# the music directory itself. There is no limit by default. +# +#auto_update_depth "3" +# +############################################################################### + + +# Symbolic link behavior ###################################################### +# +# If this setting is set to "yes", MPD will discover audio files by following +# symbolic links outside of the configured music_directory. +# +#follow_outside_symlinks "yes" +# +# If this setting is set to "yes", MPD will discover audio files by following +# symbolic links inside of the configured music_directory. +# +#follow_inside_symlinks "yes" +# +############################################################################### + + +# Zeroconf / Avahi Service Discovery ########################################## +# +# If this setting is set to "yes", service information will be published with +# Zeroconf / Avahi. +# +#zeroconf_enabled "yes" +# +# The argument to this setting will be the Zeroconf / Avahi unique name for +# this MPD server on the network. +# +#zeroconf_name "Music Player" +# +############################################################################### + + +# Permissions ################################################################# +# +# If this setting is set, MPD will require password authorization. The password +# setting can be specified multiple times for different password profiles. +# +#password "password@read,add,control,admin" +# +# This setting specifies the permissions a user has who has not yet logged in. +# +#default_permissions "read,add,control,admin" +# +############################################################################### + + +# Database ####################################################################### +# + +#database { +# plugin "proxy" +# host "other.mpd.host" +# port "6600" +#} + +# Input ####################################################################### +# + +input { + plugin "curl" +# proxy "proxy.isp.com:8080" +# proxy_user "user" +# proxy_password "password" +} + +# +############################################################################### + +# Audio Output ################################################################ +# + +audio_output { + type "pulse" + name "pulse audio" +} + +audio_output { + type "fifo" + name "my_fifo" + path "/tmp/mpd.fifo" + format "44100:16:2" +} + +# MPD supports various audio output types, as well as playing through multiple +# audio outputs at the same time, through multiple audio_output settings +# blocks. Setting this block is optional, though the server will only attempt +# autodetection for one sound card. +# +# An example of an ALSA output: +# +#audio_output { +# type "alsa" +# name "My ALSA Device" +## device "hw:0,0" # optional +## mixer_type "hardware" # optional +## mixer_device "default" # optional +## mixer_control "PCM" # optional +## mixer_index "0" # optional +#} +# +# An example of an OSS output: +# +#audio_output { +# type "oss" +# name "My OSS Device" +## device "/dev/dsp" # optional +## mixer_type "hardware" # optional +## mixer_device "/dev/mixer" # optional +## mixer_control "PCM" # optional +#} +# +# An example of a shout output (for streaming to Icecast): +# +#audio_output { +# type "shout" +# encoder "vorbis" # optional +# name "My Shout Stream" +# host "localhost" +# port "8000" +# mount "/mpd.ogg" +# password "hackme" +# quality "5.0" +# bitrate "128" +# format "44100:16:1" +## protocol "icecast2" # optional +## user "source" # optional +## description "My Stream Description" # optional +## url "http://example.com" # optional +## genre "jazz" # optional +## public "no" # optional +## timeout "2" # optional +## mixer_type "software" # optional +#} +# +# An example of a recorder output: +# +#audio_output { +# type "recorder" +# name "My recorder" +# encoder "vorbis" # optional, vorbis or lame +# path "/var/lib/mpd/recorder/mpd.ogg" +## quality "5.0" # do not define if bitrate is defined +# bitrate "128" # do not define if quality is defined +# format "44100:16:1" +#} +# +# An example of a httpd output (built-in HTTP streaming server): +# +#audio_output { +# type "httpd" +# name "My HTTP Stream" +# encoder "vorbis" # optional, vorbis or lame +# port "8000" +# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6 +## quality "5.0" # do not define if bitrate is defined +# bitrate "128" # do not define if quality is defined +# format "44100:16:1" +# max_clients "0" # optional 0=no limit +#} +# +# An example of a pulseaudio output (streaming to a remote pulseaudio server) +# +#audio_output { +# type "pulse" +# name "My Pulse Output" +## server "remote_server" # optional +## sink "remote_server_sink" # optional +#} +# +# An example of a winmm output (Windows multimedia API). +# +#audio_output { +# type "winmm" +# name "My WinMM output" +## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional +# or +## device "0" # optional +## mixer_type "hardware" # optional +#} +# +# An example of an openal output. +# +#audio_output { +# type "openal" +# name "My OpenAL output" +## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional +#} +# +# An example of an sndio output. +# +#audio_output { +# type "sndio" +# name "sndio output" +# mixer_type "software" +#} +# +# An example of an OS X output: +# +#audio_output { +# type "osx" +# name "My OS X Device" +## device "Built-in Output" # optional +## channel_map "-1,-1,0,1" # optional +#} +# +## Example "pipe" output: +# +#audio_output { +# type "pipe" +# name "my pipe" +# command "aplay -f cd 2>/dev/null" +## Or if you're want to use AudioCompress +# command "AudioCompress -m | aplay -f cd 2>/dev/null" +## Or to send raw PCM stream through PCM: +# command "nc example.org 8765" +# format "44100:16:2" +#} +# +## An example of a null output (for no audio output): +# +#audio_output { +# type "null" +# name "My Null Output" +# mixer_type "none" # optional +#} +# +############################################################################### + + +# Normalization automatic volume adjustments ################################## +# +# This setting specifies the type of ReplayGain to use. This setting can have +# the argument "off", "album", "track" or "auto". "auto" is a special mode that +# chooses between "track" and "album" depending on the current state of +# random playback. If random playback is enabled then "track" mode is used. +# See for more details about ReplayGain. +# This setting is off by default. +# +#replaygain "album" +# +# This setting sets the pre-amp used for files that have ReplayGain tags. By +# default this setting is disabled. +# +#replaygain_preamp "0" +# +# This setting sets the pre-amp used for files that do NOT have ReplayGain tags. +# By default this setting is disabled. +# +#replaygain_missing_preamp "0" +# +# This setting enables or disables ReplayGain limiting. +# MPD calculates actual amplification based on the ReplayGain tags +# and replaygain_preamp / replaygain_missing_preamp setting. +# If replaygain_limit is enabled MPD will never amplify audio signal +# above its original level. If replaygain_limit is disabled such amplification +# might occur. By default this setting is enabled. +# +#replaygain_limit "yes" +# +# This setting enables on-the-fly normalization volume adjustment. This will +# result in the volume of all playing audio to be adjusted so the output has +# equal "loudness". This setting is disabled by default. +# +#volume_normalization "no" +# +############################################################################### + +# Character Encoding ########################################################## +# +# If file or directory names do not display correctly for your locale then you +# may need to modify this setting. +# +#filesystem_charset "UTF-8" +# +############################################################################### #+end_src -**** color -#+begin_src conf -[color] - ui = auto -[color "status"] - added = green bold - changed = red bold - untracked = red bold -[color "branch"] - current = green bold - remote = magenta bold -[color "diff"] - new = green bold - old = red bold +** ncmpcpp + +*** config +:PROPERTIES: +:header-args+: :tangle ~/.ncmpcpp/config +:END: + +#+begin_src conf :tangle no +############################################################## +## This is the example configuration file. Copy it to ## +## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ## +## and set up your preferences. ## +############################################################## +# +##### directories ###### +## +## Directory for storing ncmpcpp related files. +## Changing it is useful if you want to store +## everything somewhere else and provide command +## line setting for alternative location to config +## file which defines that while launching ncmpcpp. +## +# +ncmpcpp_directory = ~/.ncmpcpp +# +## +## Directory for storing downloaded lyrics. It +## defaults to ~/.lyrics since other MPD clients +## (eg. ncmpc) also use that location. +## +# +#lyrics_directory = ~/.lyrics +# +##### connection settings ##### +# +#mpd_host = localhost +# +#mpd_port = 6600 +# +#mpd_connection_timeout = 5 +# +## Needed for tag editor and file operations to work. +## +mpd_music_dir = ~/usr/music +# +#mpd_crossfade_time = 5 +# +##### music visualizer ##### +## +## Note: In order to make music visualizer work you'll +## need to use mpd fifo output, whose format parameter +## has to be set to 44100:16:1 for mono visualization +## or 44100:16:2 for stereo visualization. Example +## configuration (it has to be put into mpd.conf): +## +## audio_output { +## type "fifo" +## name "Visualizer feed" +## path "/tmp/mpd.fifo" +## format "44100:16:2" +## } +## +# +visualizer_fifo_path = /tmp/mpd.fifo +# +## +## Note: Below parameter is needed for ncmpcpp +## to determine which output provides data for +## visualizer and thus allow syncing between +## visualization and sound as currently there +## are some problems with it. +## +# +visualizer_output_name = my fifo +# +## +## If you set format to 44100:16:2, make it 'yes'. +## +visualizer_in_stereo = yes +# +## +## Multiply received samples by given value. Very +## useful for proper visualization of quiet music. +## +#visualizer_sample_multiplier = 1 +# +## +## Note: Below parameter defines how often ncmpcpp +## has to "synchronize" visualizer and audio outputs. +## 30 seconds is optimal value, but if you experience +## synchronization problems, set it to lower value. +## Keep in mind that sane values start with >=10. +## +# +visualizer_sync_interval = 30 +# +## +## Note: To enable spectrum frequency visualization +## you need to compile ncmpcpp with fftw3 support. +## +# +## Available values: spectrum, wave, wave_filled, ellipse. +## +visualizer_type = spectrum +# +#visualizer_look = ●▮ +visualizer_look = "●•" +# +#visualizer_color = blue, cyan, green, yellow, magenta, red +# +## Alternative subset of 256 colors for terminals that support it. +## +#visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161 +# +##### system encoding ##### +## +## ncmpcpp should detect your charset encoding +## but if it failed to do so, you can specify +## charset encoding you are using here. +## +## Note: You can see whether your ncmpcpp build +## supports charset detection by checking output +## of `ncmpcpp --version`. +## +## Note: Since MPD uses UTF-8 by default, setting +## this option makes sense only if your encoding +## is different. +## +# +#system_encoding = "" +# +##### delays ##### +# +## Time of inactivity (in seconds) after playlist +## highlighting will be disabled (0 = always on). +## +#playlist_disable_highlight_delay = 5 +# +## Defines how long messages are supposed to be visible. +## +#message_delay_time = 5 +# +##### song format ##### +## +## For a song format you can use: +## +## %l - length +## %f - filename +## %D - directory +## %a - artist +## %A - album artist +## %t - title +## %b - album +## %y - date +## %n - track number (01/12 -> 01) +## %N - full track info (01/12 -> 01/12) +## %g - genre +## %c - composer +## %p - performer +## %d - disc +## %C - comment +## %P - priority +## $R - begin right alignment +## +## If you want to make sure that a part of the format is displayed +## only when certain tags are present, you can archieve it by +## grouping them with brackets, e.g. '{%a - %t}' will be evaluated +## to 'ARTIST - TITLE' if both tags are present or '' otherwise. +## It is also possible to define a list of alternatives by providing +## several groups and separating them with '|', e.g. '{%t}|{%f}' +## will be evaluated to 'TITLE' or 'FILENAME' if the former is not +## present. +## +## Note: If you want to set limit on maximal length of a tag, just +## put the appropriate number between % and character that defines +## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'. +## +## In addition, formats support markers used for text attributes. +## They are followed by character '$'. After that you can put: +## +## - 0 - default window color (discards all other colors) +## - 1 - black +## - 2 - red +## - 3 - green +## - 4 - yellow +## - 5 - blue +## - 6 - magenta +## - 7 - cyan +## - 8 - white +## - 9 - end of current color +## - b - bold text +## - u - underline text +## - r - reverse colors +## - a - use alternative character set +## +## If you don't want to use a non-color attribute anymore, just put it +## again, but this time insert character '/' between '$' and attribute +## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag +## or filename with reversed colors. +## +## If you want to use 256 colors and/or background colors in formats +## (the naming scheme is described below in section about color +## definitions), it can be done with the syntax $(COLOR), e.g. to set +## the artist tag to one of the non-standard colors and make it have +## yellow background, you need to write $(197_yellow)%a$(end). Note +## that for standard colors this is interchangable with attributes +## listed above. +## +## Note: colors can be nested. +## +# +#song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9} +# +#song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f} +# +#song_library_format = {%n - }{%t}|{%f} +# +# +#alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b +# +#alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D} +# +#now_playing_prefix = $b +# +#now_playing_suffix = $/b +# +#browser_playlist_prefix = "$2playlist$9 " +# +#selected_item_prefix = $6 +# +#selected_item_suffix = $9 +# +#modified_item_prefix = $3> $9 +# +## +## Note: attributes are not supported for the following variables. +## +#song_window_title_format = {%a - }{%t}|{%f} +## +## Note: Below variables are used for sorting songs in browser. +## The sort mode determines how songs are sorted, and can be used +## in combination with a sort format to specify a custom sorting format. +## Available values for browser_sort_mode are "name", "mtime", "format" +## and "noop". +## +# +#browser_sort_mode = name +# +#browser_sort_format = {%a - }{%t}|{%f} {(%l)} +# +##### columns settings ##### +## +## syntax of song columns list format is "column column etc." +## +## - syntax for each column is: +## +## (width of the column)[color of the column]{displayed tag} +## +## Note: Width is by default in %, if you want a column to +## have fixed size, add 'f' after the value, e.g. (10)[white]{a} +## will be the column that take 10% of screen (so the real width +## will depend on actual screen size), whereas (10f)[white]{a} +## will take 10 terminal cells, no matter how wide the screen is. +## +## - color is optional (if you want the default one, +## leave the field empty). +## +## Note: You can give a column additional attributes by putting appropriate +## character after displayed tag character. Available attributes are: +## +## - r - column will be right aligned +## - E - if tag is empty, empty tag marker won't be displayed +## +## You can also: +## +## - give a column custom name by putting it after attributes, +## separated with character ':', e.g. {lr:Length} gives you +## right aligned column of lengths named "Length". +## +## - define sequence of tags, that have to be displayed in case +## predecessor is empty in a way similar to the one in classic +## song format, i.e. using '|' character, e.g. {a|c|p:Owner} +## creates column named "Owner" that tries to display artist +## tag and then composer and performer if previous ones are +## not available. +## +# +#song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l} +# +##### various settings ##### +# +## +## Note: Custom command that will be executed each +## time song changes. Useful for notifications etc. +## +#execute_on_song_change = "" +# +#playlist_show_mpd_host = no +# +#playlist_show_remaining_time = no +# +#playlist_shorten_total_times = no +# +#playlist_separate_albums = no +# +## +## Note: Possible display modes: classic, columns. +## +#playlist_display_mode = columns +# +#browser_display_mode = classic +# +#search_engine_display_mode = classic +# +#playlist_editor_display_mode = classic +# +#discard_colors_if_item_is_selected = yes +# +#incremental_seeking = yes +# +#seek_time = 1 +# +#volume_change_step = 2 +# +#autocenter_mode = no +# +#centered_cursor = no +# +## +## Note: You can specify third character which will +## be used to build 'empty' part of progressbar. +## +#progressbar_look = => +progressbar_look = "─╼╶" +#progressbar_look = "─⊙╶" +# +#progressbar_boldness = yes +# +## Available values: database, playlist. +## +#default_place_to_search_in = database +# +## Available values: classic, alternative. +## +#user_interface = classic +# +#data_fetching_delay = yes +# +## Available values: artist, album_artist, date, genre, composer, performer. +## +#media_library_primary_tag = artist +# +## Available values: wrapped, normal. +## +#default_find_mode = wrapped +# +#default_tag_editor_pattern = %n - %t +# +#header_visibility = yes +# +#statusbar_visibility = yes +# +#titles_visibility = yes +# +#header_text_scrolling = yes +# +#cyclic_scrolling = no +# +#lines_scrolled = 2 +# +#follow_now_playing_lyrics = no +# +#fetch_lyrics_for_current_song_in_background = no +# +#store_lyrics_in_song_dir = no +# +#generate_win32_compatible_filenames = yes +# +#allow_for_physical_item_deletion = no +# +## +## Note: If you set this variable, ncmpcpp will try to +## get info from last.fm in language you set and if it +## fails, it will fall back to english. Otherwise it will +## use english the first time. +## +## Note: Language has to be expressed as an ISO 639 alpha-2 code. +## +#lastfm_preferred_language = en +# +#show_hidden_files_in_local_browser = no +# +## +## How shall screen switcher work? +## +## - "previous" - switch between the current and previous screen. +## - "screen1,...,screenN" - switch between given sequence of screens. +## +## Screens available for use: help, playlist, browser, search_engine, +## media_library, playlist_editor, tag_editor, outputs, visualizer, clock. +## +#screen_switcher_mode = playlist, browser +# +## +## Note: You can define startup screen +## by choosing screen from the list above. +## +#startup_screen = playlist +# +## +## Note: You can define startup slave screen +## by choosing screen from the list above or +## an empty value for no slave screen. +## +#startup_slave_screen = "" +# +#startup_slave_screen_focus = no +# +## +## Default width of locked screen (in %). +## Acceptable values are from 20 to 80. +## +# +#locked_screen_width_part = 50 +# +#ask_for_locked_screen_width_part = yes +# +#jump_to_now_playing_song_at_start = yes +# +#ask_before_clearing_playlists = yes +# +#clock_display_seconds = no +# +#display_volume_level = yes +# +#display_bitrate = no +# +#display_remaining_time = no +# +## Available values: none, basic, extended, perl. +## +#regular_expressions = perl +# +## +## Note: If below is enabled, ncmpcpp will ignore leading +## "The" word while sorting items in browser, tags in +## media library, etc. +## +#ignore_leading_the = no +# +#block_search_constraints_change_if_items_found = yes +# +#mouse_support = yes +# +#mouse_list_scroll_whole_page = yes +# +#empty_tag_marker = +# +#tags_separator = " | " +# +#tag_editor_extended_numeration = no +# +#media_library_sort_by_mtime = no +# +#enable_window_title = yes +# +## +## Note: You can choose default search mode for search +## engine. Available modes are: +## +## - 1 - use mpd built-in searching (no regexes, pattern matching) +## - 2 - use ncmpcpp searching (pattern matching with support for regexes, +## but if your mpd is on a remote machine, downloading big database +## to process it can take a while +## - 3 - match only exact values (this mode uses mpd function for searching +## in database and local one for searching in current playlist) +## +# +#search_engine_default_search_mode = 1 +# +#external_editor = nano +# +## Note: set to yes if external editor is a console application. +## +#use_console_editor = yes +# +##### colors definitions ##### +## +## It is possible to set a background color by setting a color +## value "_", e.g. red_black will set +## foregound color to red and background color to black. +## +## In addition, for terminals that support 256 colors it +## is possible to set one of them by using a number in range +## [1, 256] instead of color name, e.g. numerical value +## corresponding to red_black is 2_1. To find out if the +## terminal supports 256 colors, run ncmpcpp and check out +## the bottom of the help screen for list of available colors +## and their numerical values. +## +## Note: due to technical limitations of ncurses, if 256 colors +## are used, it is possible to either use only the colors with +## default background color, or all pairs from 1_1 up to 254_127, +## depending on the ncurses version used. +## +# +#colors_enabled = yes +# +#empty_tag_color = cyan +# +#header_window_color = default +# +#volume_color = default +# +#state_line_color = default +# +#state_flags_color = default +# +#main_window_color = yellow +# +#color1 = white +# +#color2 = green +# +#main_window_highlight_color = yellow +# +#progressbar_color = black +# +#progressbar_elapsed_color = green +# +#statusbar_color = default +# +#alternative_ui_separator_color = black +# +#active_column_color = red +# +#window_border_color = green +# +#active_window_border = red +# #+end_src -**** status -#+begin_src conf -[status] - # showUntrackedFiles = all - short=true - branch=true +*** bindings +:PROPERTIES: +:header-args+: :tangle ~/.ncmpcpp/bindings +:END: + +#+begin_src conf :tangle no +def_key "j" + scroll_down +def_key "k" + scroll_up + +def_key "ctrl-u" + page_up +def_key "ctrl-d" + page_down + +def_key "h" + previous_column +def_key "l" + next_column + +def_key "." + show_lyrics + +def_key "n" + next_found_item +def_key "N" + previous_found_item + +def_key "J" + move_sort_order_down +def_key "K" + move_sort_order_up #+end_src -**** github +** pigeonhole +*** amin.sieve +:PROPERTIES: +:header-args+: :tangle ~/mail/bndl.org/amin/sieve/amin.sieve :comments none +:END: + #+begin_src conf -[github] - user = aminb +require ["regex", "variables", "fileinto", "envelope", + "mailbox", "imap4flags", "include"]; + +# webmasters +if anyof ( + address :is "from" ["webmasters@gnu.org", "webmasters-comment@gnu.org"]) { + fileinto :create "gnu.webmasters"; + stop; +} + +include :personal "lists"; #+end_src -*** gitignore +*** lists.sieve :PROPERTIES: -:header-args+: :tangle ~/.gitignore_global +:header-args+: :tangle ~/mail/bndl.org/amin/sieve/lists.sieve :comments none :END: #+begin_src conf -*.orig -*.py[co] -*.sublime-workspace -*~ -.DS_Store -*.elc -*-autoloads.el +require ["regex", "variables", "fileinto", "envelope", + "mailbox", "imap4flags", "include"]; + +# mailing lists +if anyof ( + header :contains "list-id" + [ "" + , "" + , "" + , "" + , "" + , "" + , "" + , "" + , "" + , "" + , "" + , "" + , "" + , "" + , "" + ] ) { + if header :regex "list-id" "<([a-z_0-9-]+)[.@]" { + set :lower "listname" "${1}"; + fileinto :create "gnu.${listname}"; + stop; + } +} + +# sr.ht lists, with dots ('.') omitted +if anyof ( + header :contains "list-id" + [ "<~bandali/public-inbox@lists.sr.ht>" + , "<~sircmpwn/sr.ht-admins@lists.sr.ht>" + , "<~sircmpwn/sr.ht-announce@lists.sr.ht>" + , "<~sircmpwn/sr.ht-dev@lists.sr.ht>" + , "<~sircmpwn/sr.ht-discuss@lists.sr.ht>" + ] ) { + if header :regex "list-id" "(~[a-z_0-9-]+)/([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)@" { + set :lower "username" "${1}"; + set :lower "listname" "${2}${3}${4}${5}${6}${7}"; + fileinto :create "gnu.${username}.${listname}"; + stop; + } +} #+end_src -** Latexmk +** redshift :PROPERTIES: -:header-args+: :tangle ~/.latexmkrc +:header-args+: :tangle ~/.config/redshift.conf :comments none :END: #+begin_src conf -$pdf_previewer = "start zathura %O %S"; -$clean_ext = "aux out"; +; Global settings for redshift +[redshift] +; Set the day and night screen temperatures (Neutral is 6500K) +;temp-day=5700 +;temp-night=3500 + +;temp-day=6500 +temp-day=6200 +;temp-night=4800 +;temp-night=5000 +;temp-night=4500 +temp-night=4000 + +; Enable/Disable a smooth transition between day and night +; 0 will cause a direct change from day to night screen temperature. +; 1 will gradually increase or decrease the screen temperature. +transition=1 + +; Set the screen brightness. Default is 1.0. +;brightness=0.9 +; It is also possible to use different settings for day and night +; since version 1.8. +;brightness-day=0.7 +;brightness-night=0.4 +; Set the screen gamma (for all colors, or each color channel +; individually) +;gamma=0.8 +;gamma=1.0 +;gamma=0.8:0.7:0.8 +; This can also be set individually for day and night since +; version 1.10. +;gamma-day=0.8:0.7:0.8 +;gamma-night=0.6 + +; Set the location-provider: 'geoclue2' or 'manual' +; type 'redshift -l list' to see possible values. +; The location provider settings are in a different section. +;location-provider=manual +location-provider=geoclue2 + +; Set the adjustment-method: 'randr', 'vidmode' +; type 'redshift -m list' to see all possible values. +; 'randr' is the preferred method, 'vidmode' is an older API. +; but works in some cases when 'randr' does not. +; The adjustment method settings are in a different section. +adjustment-method=randr + +; Configuration of the location-provider: +; type 'redshift -l PROVIDER:help' to see the settings. +; ex: 'redshift -l manual:help' +; Keep in mind that longitudes west of Greenwich (e.g. the Americas) +; are negative numbers. +;[manual] +;lat=48.1 +;lon=11.6 + +; Configuration of the adjustment-method +; type 'redshift -m METHOD:help' to see the settings. +; ex: 'redshift -m randr:help' +; In this example, randr is configured to adjust screen 1. +; Note that the numbering starts from 0, so this is actually the +; second screen. If this option is not specified, Redshift will try +; to adjust _all_ screens. +;[randr] +;screen=1 +#+end_src + +** systemd + +Keep boot messages on tty1 (see [[https://wiki.archlinux.org/index.php/getty#Have_boot_messages_stay_on_tty1][here]]) + +#+begin_src conf :tangle /sudo::/etc/systemd/system/getty@tty1.service.d/noclear.conf +[Service] +TTYVTDisallocate=no +#+end_src + +** TLP + +*** langa + +#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "langa")) "/sudo::/etc/default/tlp") +# ------------------------------------------------------------------------------ +# tlp - Parameters for power saving +# See full explanation: https://linrunner.de/en/tlp/docs/tlp-configuration.html + +# Notes: +# - Some parameters are disabled, remove the leading '#' to enable # them; +# shown values are suggestions not defaults +# - Default *: intrinsic default that is effective when the parameter is missing +# or disabled by a leading '#'; use PARAM="" to disable intrinsic defaults for +# parameters with text string values +# - Default : do nothing or use kernel/hardware defaults + +# Set to 0 to disable, 1 to enable TLP. +# Default: 0 +TLP_ENABLE=1 + +# Operation mode when no power supply can be detected: AC, BAT. +# Concerns some desktop and embedded hardware only. +# Default: +TLP_DEFAULT_MODE=AC + +# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE +# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC. +# Default: 0 +TLP_PERSISTENT_DEFAULT=0 + +# Seconds laptop mode has to wait after the disk goes idle before doing a sync. +# Non-zero value enables, zero disables laptop mode. +# Default: 0 (AC), 2 (BAT) +DISK_IDLE_SECS_ON_AC=0 +DISK_IDLE_SECS_ON_BAT=2 + +# Dirty page values (timeouts in secs). +# Default: 15 (AC + BAT) +MAX_LOST_WORK_SECS_ON_AC=15 +MAX_LOST_WORK_SECS_ON_BAT=60 + +# Note: CPU parameters below are disabled by default, remove the leading # +# to enable them, otherwise kernel defaults will be used. + +# Select a CPU frequency scaling governor. +# Intel Core i processor with intel_pstate driver: +# powersave(*), performance. +# Older hardware with acpi-cpufreq driver: +# ondemand(*), powersave, performance, conservative, schedutil. +# (*) is recommended. +# Use tlp-stat -p to show the active driver and available governors. +# Important: +# powersave for intel_pstate and ondemand for acpi-cpufreq are power +# efficient for *almost all* workloads and therefore kernel and most +# distributions have chosen them as defaults. If you still want to change, +# you should know what you're doing! You *must* disable your distribution's +# governor settings or conflicts will occur. +# Default: +#CPU_SCALING_GOVERNOR_ON_AC=powersave +#CPU_SCALING_GOVERNOR_ON_BAT=powersave + +# Set the min/max frequency available for the scaling governor. +# Possible values depend on your CPU. For available frequencies see +# the output of tlp-stat -p. +# Default: +#CPU_SCALING_MIN_FREQ_ON_AC=0 +#CPU_SCALING_MAX_FREQ_ON_AC=0 +#CPU_SCALING_MIN_FREQ_ON_BAT=0 +#CPU_SCALING_MAX_FREQ_ON_BAT=0 + +# Set energy performance hints (HWP) for Intel P-state governor: +# performance, balance_performance, default, balance_power, power +# Values are given in order of increasing power saving. +# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required. +# Default: +CPU_HWP_ON_AC=balance_performance +CPU_HWP_ON_BAT=balance_power + +# Set Intel P-state performance: 0..100 (%). +# Limit the max/min P-state to control the power dissipation of the CPU. +# Values are stated as a percentage of the available performance. +# Requires an Intel Core i processor with intel_pstate driver. +# Default: +#CPU_MIN_PERF_ON_AC=0 +#CPU_MAX_PERF_ON_AC=100 +#CPU_MIN_PERF_ON_BAT=0 +#CPU_MAX_PERF_ON_BAT=30 + +# Set the CPU "turbo boost" feature: 0=disable, 1=allow +# Requires an Intel Core i processor. +# Important: +# - This may conflict with your distribution's governor settings +# - A value of 1 does *not* activate boosting, it just allows it +# Default: +#CPU_BOOST_ON_AC=1 +#CPU_BOOST_ON_BAT=0 + +# Minimize number of used CPU cores/hyper-threads under light load conditions: +# 0=disable, 1=enable. +# Default: +SCHED_POWERSAVE_ON_AC=0 +SCHED_POWERSAVE_ON_BAT=1 + +# Kernel NMI Watchdog: +# 0=disable (default, saves power), 1=enable (for kernel debugging only). +# Default: +NMI_WATCHDOG=0 + +# Change CPU voltages aka "undervolting" - Kernel with PHC patch required. +# Frequency voltage pairs are written to: +# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls +# CAUTION: only use this, if you thoroughly understand what you are doing! +# Default: . +#PHC_CONTROLS="F:V F:V F:V F:V" + +# Set CPU performance versus energy savings policy: +# performance, balance-performance, default, balance-power, power. +# Values are given in order of increasing power saving. +# Requires kernel module msr and x86_energy_perf_policy from linux-tools. +# Default: +ENERGY_PERF_POLICY_ON_AC=performance +ENERGY_PERF_POLICY_ON_BAT=balance-power + +# Disk devices; separate multiple devices with spaces. +# Devices can be specified by disk ID also (lookup with: tlp diskid). +# Note: DISK parameters below are effective only when this option is configured. +# Default: "nvme0n1 sda" +DISK_DEVICES="sda sdb" + +# Disk advanced power management level: 1..254, 255 (max saving, min, off). +# Levels 1..127 may spin down the disk; 255 allowable on most drives. +# Separate values for multiple disks with spaces. Use the special value 'keep' +# to keep the hardware default for the particular disk. +# Default: +DISK_APM_LEVEL_ON_AC="254 254" +DISK_APM_LEVEL_ON_BAT="128 128" + +# Hard disk spin down timeout: +# 0: spin down disabled +# 1..240: timeouts from 5s to 20min (in units of 5s) +# 241..251: timeouts from 30min to 5.5 hours (in units of 30min) +# See 'man hdparm' for details. +# Separate values for multiple disks with spaces. Use the special value 'keep' +# to keep the hardware default for the particular disk. +# Default: +#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0" +#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0" + +# Select I/O scheduler for the disk devices. +# Multi queue (blk-mq) schedulers: +# mq-deadline(*), none, kyber, bfq +# Single queue schedulers: +# deadline(*), cfq, bfq, noop +# (*) recommended. +# Separate values for multiple disks with spaces. Use the special value 'keep' +# to keep the kernel default scheduler for the particular disk. +# Notes: +# - Multi queue (blk-mq) may need kernel boot option 'scsi_mod.use_blk_mq=1' +# and 'modprobe mq-deadline-iosched|kyber|bfq' on kernels < 5.0 +# - Single queue schedulers are legacy now and were removed together with +# the old block layer in kernel 5.0 +# Default: keep +#DISK_IOSCHED="mq-deadline mq-deadline" + +# AHCI link power management (ALPM) for disk devices: +# min_power, med_power_with_dipm(*), medium_power, max_performance. +# (*) Kernel >= 4.15 required, then recommended. +# Multiple values separated with spaces are tried sequentially until success. +# Default: +SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance" +SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power" + +# Exclude host devices from AHCI link power management. +# Separate multiple hosts with spaces. +# Default: +#SATA_LINKPWR_BLACKLIST="host1" + +# Runtime Power Management for AHCI host and disks devices: +# on=disable, auto=enable. +# EXPERIMENTAL ** WARNING: auto may cause system lockups/data loss. +# Default: +#AHCI_RUNTIME_PM_ON_AC=on +#AHCI_RUNTIME_PM_ON_BAT=on + +# Seconds of inactivity before disk is suspended. +# Note: effective only when AHCI_RUNTIME_PM_ON_AC/BAT is activated. +# Default: 15 +AHCI_RUNTIME_PM_TIMEOUT=15 + +# PCI Express Active State Power Management (PCIe ASPM): +# default(*), performance, powersave. +# (*) keeps BIOS ASPM defaults (recommended) +# Default: +#PCIE_ASPM_ON_AC=default +#PCIE_ASPM_ON_BAT=default + +# Set the min/max/turbo frequency for the Intel GPU. +# Possible values depend on your hardware. For available frequencies see +# the output of tlp-stat -g. +# Default: +#INTEL_GPU_MIN_FREQ_ON_AC=0 +#INTEL_GPU_MIN_FREQ_ON_BAT=0 +#INTEL_GPU_MAX_FREQ_ON_AC=0 +#INTEL_GPU_MAX_FREQ_ON_BAT=0 +#INTEL_GPU_BOOST_FREQ_ON_AC=0 +#INTEL_GPU_BOOST_FREQ_ON_BAT=0 + +# Radeon graphics clock speed (profile method): low, mid, high, auto, default; +# auto = mid on BAT, high on AC. +# Default: default +RADEON_POWER_PROFILE_ON_AC=default +RADEON_POWER_PROFILE_ON_BAT=default + +# Radeon dynamic power management method (DPM): battery, performance. +# Default: +RADEON_DPM_STATE_ON_AC=performance +RADEON_DPM_STATE_ON_BAT=battery + +# Radeon DPM performance level: auto, low, high; auto is recommended. +# Note: effective only when RADEON_DPM_STATE_ON_AC/BAT is activated. +# Default: auto +RADEON_DPM_PERF_LEVEL_ON_AC=auto +RADEON_DPM_PERF_LEVEL_ON_BAT=auto + +# WiFi power saving mode: on=enable, off=disable; not supported by all adapters. +# Default: +WIFI_PWR_ON_AC=off +WIFI_PWR_ON_BAT=on + +# Disable wake on LAN: Y/N. +# Default: N +WOL_DISABLE=Y -# $pdf_update_method = 4; -# $pdf_update_command = "zathura %O %S"; +# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs). +# A value of 0 disables, >=1 enables power saving (recommended: 1). +# Default: +SOUND_POWER_SAVE_ON_AC=0 +SOUND_POWER_SAVE_ON_BAT=0 -# Synctex allows one to jump to from the PDF in Zathura to the source in Emacs -# by Ctrl+click in the PDF. -# Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex -# editor. -# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S'; +# Disable controller too (HDA only): Y/N. +# Note: effective only when SOUND_POWER_SAVE_ON_AC/BAT is activated. +# Default: Y +SOUND_POWER_SAVE_CONTROLLER=N + +# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable. +# Drive can be powered on again by releasing (and reinserting) the eject lever +# or by pressing the disc eject button on newer models. +# Note: an UltraBay/MediaBay hard disk is never powered off. +# Default: 0 +BAY_POWEROFF_ON_AC=0 +BAY_POWEROFF_ON_BAT=0 +# Optical drive device to power off +# Default: sr0 +BAY_DEVICE="sr0" + +# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable. +# Default: +RUNTIME_PM_ON_AC=on +RUNTIME_PM_ON_BAT=auto + +# Exclude PCI(e) device adresses the following list from Runtime PM +# (separate with spaces). Use lspci to get the adresses (1st column). +# Default: +#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6" + +# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM. +# Default when unconfigured is "amdgpu nouveau nvidia radeon" which +# prevents accidential power-on of dGPU in hybrid graphics setups. +# Separate multiple drivers with spaces. +# Default: "amdgpu mei_me nouveau nvidia pcieport radeon", use "" to disable +# completely. +#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu mei_me nouveau nvidia pcieport radeon" + +# Set to 0 to disable, 1 to enable USB autosuspend feature. +# Default: 0 +USB_AUTOSUSPEND=1 + +# Exclude listed devices from USB autosuspend (separate with spaces). +# Use lsusb to get the ids. +# Note: input devices (usbhid) are excluded automatically +# Default: +#USB_BLACKLIST="1111:2222 3333:4444" + +# Bluetooth devices are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude. +# Default: 0 +USB_BLACKLIST_BTUSB=0 + +# Phone devices are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude (enable charging). +# Default: 0 +USB_BLACKLIST_PHONE=0 + +# Printers are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude. +# Default: 1 +USB_BLACKLIST_PRINTER=1 + +# WWAN devices are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude. +# Default: 0 +USB_BLACKLIST_WWAN=0 + +# Include listed devices into USB autosuspend even if already excluded +# by the blacklists above (separate with spaces). Use lsusb to get the ids. +# Default: +#USB_WHITELIST="1111:2222 3333:4444" + +# Set to 1 to disable autosuspend before shutdown, 0 to do nothing +# (workaround for USB devices that cause shutdown problems). +# Default: 0 +#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1 + +# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown +# on system startup: 0=disable, 1=enable. +# Note: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below +# are ignored when this is enabled. +# Default: 0 +#RESTORE_DEVICE_STATE_ON_STARTUP=0 +RESTORE_DEVICE_STATE_ON_STARTUP=1 + +# Radio devices to disable on startup: bluetooth, wifi, wwan. +# Separate multiple devices with spaces. +# Default: +#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan" + +# Radio devices to enable on startup: bluetooth, wifi, wwan. +# Separate multiple devices with spaces. +# Default: +#DEVICES_TO_ENABLE_ON_STARTUP="wifi" + +# Radio devices to disable on shutdown: bluetooth, wifi, wwan. +# (workaround for devices that are blocking shutdown). +# Default: +#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan" + +# Radio devices to enable on shutdown: bluetooth, wifi, wwan. +# (to prevent other operating systems from missing radios). +# Default: +#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan" + +# Radio devices to enable on AC: bluetooth, wifi, wwan. +# Default: +#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan" + +# Radio devices to disable on battery: bluetooth, wifi, wwan. +# Default: +#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan" +DEVICES_TO_DISABLE_ON_BAT="bluetooth" + +# Radio devices to disable on battery when not in use (not connected): +# bluetooth, wifi, wwan. +# Default: +#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan" + +# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module +# required). Charging starts when the remaining capacity falls below the +# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value. +# Main / Internal battery (values in %) +# Default: +#START_CHARGE_THRESH_BAT0=75 +#STOP_CHARGE_THRESH_BAT0=80 +# Ultrabay / Slice / Replaceable battery (values in %) +# Default: +#START_CHARGE_THRESH_BAT1=75 +#STOP_CHARGE_THRESH_BAT1=80 + +# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable. +# Default: 0 +#RESTORE_THRESHOLDS_ON_BAT=1 + +# Battery feature drivers: 0=disable, 1=enable +# Default: 1 (all) +NATACPI_ENABLE=1 +TPACPI_ENABLE=1 +TPSMAPI_ENABLE=1 + +# ------------------------------------------------------------------------------ +# tlp-rdw - Parameters for the radio device wizard +# Possible devices: bluetooth, wifi, wwan. + +# Notes: +# - Parameters are disabled by default, remove the leading # to enable them +# - Separate multiple radio devices with spaces + +# Default: (for all parameters below) + +# Radio devices to disable on connect. +#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan" +#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan" +#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi" + +# Radio devices to enable on disconnect. +#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan" +#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT="" +#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT="" + +# Radio devices to enable/disable when docked. +#DEVICES_TO_ENABLE_ON_DOCK="" +#DEVICES_TO_DISABLE_ON_DOCK="" + +# Radio devices to enable/disable when undocked. +#DEVICES_TO_ENABLE_ON_UNDOCK="wifi" +#DEVICES_TO_DISABLE_ON_UNDOCK="" +#+end_src + +*** shemshak + +#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "shemshak")) "/sudo::/etc/default/tlp") +# ------------------------------------------------------------------------------ +# tlp - Parameters for power saving +# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html + +# Hint: some features are disabled by default, remove the leading # to enable +# them. + +# Set to 0 to disable, 1 to enable TLP. +TLP_ENABLE=1 + +# Operation mode when no power supply can be detected: AC, BAT. +# Concerns some desktop and embedded hardware only. +TLP_DEFAULT_MODE=AC + +# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE +# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC. +TLP_PERSISTENT_DEFAULT=0 + +# Seconds laptop mode has to wait after the disk goes idle before doing a sync. +# Non-zero value enables, zero disables laptop mode. +DISK_IDLE_SECS_ON_AC=0 +DISK_IDLE_SECS_ON_BAT=2 + +# Dirty page values (timeouts in secs). +MAX_LOST_WORK_SECS_ON_AC=15 +MAX_LOST_WORK_SECS_ON_BAT=60 + +# Hint: CPU parameters below are disabled by default, remove the leading # +# to enable them, otherwise kernel default values are used. + +# Select a CPU frequency scaling governor. +# Intel Core i processor with intel_pstate driver: +# powersave(*), performance. +# Older hardware with acpi-cpufreq driver: +# ondemand(*), powersave, performance, conservative, schedutil. +# (*) is recommended. +# Hint: use tlp-stat -p to show the active driver and available governors. +# Important: +# powersave for intel_pstate and ondemand for acpi-cpufreq are power +# efficient for *almost all* workloads and therefore kernel and most +# distributions have chosen them as defaults. If you still want to change, +# you should know what you're doing! You *must* disable your distribution's +# governor settings or conflicts will occur. +#CPU_SCALING_GOVERNOR_ON_AC=powersave +#CPU_SCALING_GOVERNOR_ON_BAT=powersave + +# Set the min/max frequency available for the scaling governor. +# Possible values strongly depend on your CPU. For available frequencies see +# the output of tlp-stat -p. +#CPU_SCALING_MIN_FREQ_ON_AC=0 +#CPU_SCALING_MAX_FREQ_ON_AC=0 +#CPU_SCALING_MIN_FREQ_ON_BAT=0 +#CPU_SCALING_MAX_FREQ_ON_BAT=0 + +# Set energy performance hints (HWP) for Intel P-state governor: +# performance, balance_performance, default, balance_power, power +# Values are given in order of increasing power saving. +# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required. +CPU_HWP_ON_AC=balance_performance +CPU_HWP_ON_BAT=balance_power + +# Set Intel P-state performance: 0..100 (%). +# Limit the max/min P-state to control the power dissipation of the CPU. +# Values are stated as a percentage of the available performance. +# Requires an Intel Core i processor with intel_pstate driver. +#CPU_MIN_PERF_ON_AC=0 +#CPU_MAX_PERF_ON_AC=100 +#CPU_MIN_PERF_ON_BAT=0 +#CPU_MAX_PERF_ON_BAT=30 + +# Set the CPU "turbo boost" feature: 0=disable, 1=allow +# Requires an Intel Core i processor. +# Important: +# - This may conflict with your distribution's governor settings +# - A value of 1 does *not* activate boosting, it just allows it +#CPU_BOOST_ON_AC=1 +#CPU_BOOST_ON_BAT=0 + +# Minimize number of used CPU cores/hyper-threads under light load conditions: +# 0=disable, 1=enable. +SCHED_POWERSAVE_ON_AC=0 +SCHED_POWERSAVE_ON_BAT=1 + +# Kernel NMI Watchdog: +# 0=disable (default, saves power), 1=enable (for kernel debugging only). +NMI_WATCHDOG=0 + +# Change CPU voltages aka "undervolting" - Kernel with PHC patch required. +# Frequency voltage pairs are written to: +# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls +# CAUTION: only use this, if you thoroughly understand what you are doing! +#PHC_CONTROLS="F:V F:V F:V F:V" + +# Set CPU performance versus energy savings policy: +# performance, balance-performance, default, balance-power, power. +# Values are given in order of increasing power saving. +# Requires kernel module msr and x86_energy_perf_policy from linux-tools. +ENERGY_PERF_POLICY_ON_AC=performance +ENERGY_PERF_POLICY_ON_BAT=balance-power + +# Disk devices; separate multiple devices with spaces (default: sda). +# Devices can be specified by disk ID also (lookup with: tlp diskid). +DISK_DEVICES="sda sdb" + +# Disk advanced power management level: 1..254, 255 (max saving, min, off). +# Levels 1..127 may spin down the disk; 255 allowable on most drives. +# Separate values for multiple disks with spaces. Use the special value 'keep' +# to keep the hardware default for the particular disk. +DISK_APM_LEVEL_ON_AC="254 254" +DISK_APM_LEVEL_ON_BAT="128 128" + +# Hard disk spin down timeout: +# 0: spin down disabled +# 1..240: timeouts from 5s to 20min (in units of 5s) +# 241..251: timeouts from 30min to 5.5 hours (in units of 30min) +# See 'man hdparm' for details. +# Separate values for multiple disks with spaces. Use the special value 'keep' +# to keep the hardware default for the particular disk. +#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0" +#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0" + +# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq). +# Separate values for multiple disks with spaces. Use the special value 'keep' +# to keep the kernel default scheduler for the particular disk. +#DISK_IOSCHED="cfq cfq" + +# AHCI link power management (ALPM) for disk devices: +# min_power, med_power_with_dipm(*), medium_power, max_performance. +# (*) Kernel >= 4.15 required, then recommended. +# Multiple values separated with spaces are tried sequentially until success. +SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance" +SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power" + +# Exclude host devices from AHCI link power management. +# Separate multiple hosts with spaces. +#SATA_LINKPWR_BLACKLIST="host1" + +# Runtime Power Management for AHCI host and disks devices: +# on=disable, auto=enable. +# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss. +#AHCI_RUNTIME_PM_ON_AC=on +#AHCI_RUNTIME_PM_ON_BAT=on + +# Seconds of inactivity before disk is suspended. +AHCI_RUNTIME_PM_TIMEOUT=15 + +# PCI Express Active State Power Management (PCIe ASPM): +# default, performance, powersave. +PCIE_ASPM_ON_AC=performance +PCIE_ASPM_ON_BAT=powersave + +# Radeon graphics clock speed (profile method): low, mid, high, auto, default; +# auto = mid on BAT, high on AC; default = use hardware defaults. +RADEON_POWER_PROFILE_ON_AC=high +RADEON_POWER_PROFILE_ON_BAT=low + +# Radeon dynamic power management method (DPM): battery, performance. +RADEON_DPM_STATE_ON_AC=performance +RADEON_DPM_STATE_ON_BAT=battery + +# Radeon DPM performance level: auto, low, high; auto is recommended. +RADEON_DPM_PERF_LEVEL_ON_AC=auto +RADEON_DPM_PERF_LEVEL_ON_BAT=auto + +# WiFi power saving mode: on=enable, off=disable; not supported by all adapters. +WIFI_PWR_ON_AC=off +WIFI_PWR_ON_BAT=on + +# Disable wake on LAN: Y/N. +WOL_DISABLE=Y + +# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs). +# A value of 0 disables, >=1 enables power saving (recommended: 1). +SOUND_POWER_SAVE_ON_AC=0 +SOUND_POWER_SAVE_ON_BAT=0 + +# Disable controller too (HDA only): Y/N. +SOUND_POWER_SAVE_CONTROLLER=N + +# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable. +# Drive can be powered on again by releasing (and reinserting) the eject lever +# or by pressing the disc eject button on newer models. +# Note: an UltraBay/MediaBay hard disk is never powered off. +BAY_POWEROFF_ON_AC=0 +BAY_POWEROFF_ON_BAT=0 +# Optical drive device to power off (default sr0). +BAY_DEVICE="sr0" + +# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable. +RUNTIME_PM_ON_AC=on +RUNTIME_PM_ON_BAT=auto + +# Exclude PCI(e) device adresses the following list from Runtime PM +# (separate with spaces). Use lspci to get the adresses (1st column). +#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6" +RUNTIME_PM_BLACKLIST="01:00.0" + +# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM. +# Default when unconfigured is "amdgpu nouveau nvidia radeon" which +# prevents accidential power-on of dGPU in hybrid graphics setups. +# Use "" to disable the feature completely. +# Separate multiple drivers with spaces. +#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon" + +# Set to 0 to disable, 1 to enable USB autosuspend feature. +USB_AUTOSUSPEND=1 + +# Exclude listed devices from USB autosuspend (separate with spaces). +# Use lsusb to get the ids. +# Note: input devices (usbhid) are excluded automatically +#USB_BLACKLIST="1111:2222 3333:4444" + +# Bluetooth devices are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude. +USB_BLACKLIST_BTUSB=0 + +# Phone devices are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude (enable charging). +USB_BLACKLIST_PHONE=0 + +# Printers are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude. +USB_BLACKLIST_PRINTER=1 + +# WWAN devices are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude. +USB_BLACKLIST_WWAN=1 + +# Include listed devices into USB autosuspend even if already excluded +# by the blacklists above (separate with spaces). +# Use lsusb to get the ids. +#USB_WHITELIST="1111:2222 3333:4444" + +# Set to 1 to disable autosuspend before shutdown, 0 to do nothing +# (workaround for USB devices that cause shutdown problems). +#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1 + +# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown +# on system startup: 0=disable, 1=enable. +# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below +# are ignored when this is enabled! +#RESTORE_DEVICE_STATE_ON_STARTUP=0 +RESTORE_DEVICE_STATE_ON_STARTUP=1 + +# Radio devices to disable on startup: bluetooth, wifi, wwan. +# Separate multiple devices with spaces. +#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan" + +# Radio devices to enable on startup: bluetooth, wifi, wwan. +# Separate multiple devices with spaces. +#DEVICES_TO_ENABLE_ON_STARTUP="wifi" + +# Radio devices to disable on shutdown: bluetooth, wifi, wwan. +# (workaround for devices that are blocking shutdown). +#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan" + +# Radio devices to enable on shutdown: bluetooth, wifi, wwan. +# (to prevent other operating systems from missing radios). +#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan" + +# Radio devices to enable on AC: bluetooth, wifi, wwan. +#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan" + +# Radio devices to disable on battery: bluetooth, wifi, wwan. +#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan" + +# Radio devices to disable on battery when not in use (not connected): +# bluetooth, wifi, wwan. +#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan" + +# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module +# required). Charging starts when the remaining capacity falls below the +# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value. +# Main / Internal battery (values in %) +#START_CHARGE_THRESH_BAT0=75 +#STOP_CHARGE_THRESH_BAT0=80 +# Ultrabay / Slice / Replaceable battery (values in %) +#START_CHARGE_THRESH_BAT1=75 +#STOP_CHARGE_THRESH_BAT1=80 + +# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable. +#RESTORE_THRESHOLDS_ON_BAT=1 + +# ------------------------------------------------------------------------------ +# tlp-rdw - Parameters for the radio device wizard +# Possible devices: bluetooth, wifi, wwan. + +# Hints: +# - Parameters are disabled by default, remove the leading # to enable them +# - Separate multiple radio devices with spaces + +# Radio devices to disable on connect. +#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan" +#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan" +#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi" + +# Radio devices to enable on disconnect. +#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan" +#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT="" +#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT="" + +# Radio devices to enable/disable when docked. +#DEVICES_TO_ENABLE_ON_DOCK="" +#DEVICES_TO_DISABLE_ON_DOCK="" + +# Radio devices to enable/disable when undocked. +#DEVICES_TO_ENABLE_ON_UNDOCK="wifi" +#DEVICES_TO_DISABLE_ON_UNDOCK="" #+end_src +