X-Git-Url: https://git.shemshak.org/~bandali/configs/blobdiff_plain/669d7322ff6068bd09061c8e729baf5f81f02b29..a4eace5127b5a0f3a99b02b0514e6f50b647cc97:/rc.org?ds=sidebyside diff --git a/rc.org b/rc.org index be3da30..6f77a37 100644 --- a/rc.org +++ b/rc.org @@ -14,881 +14,6 @@ Note: This file is best viewed inside Emacs with org mode. This section contains the configuration files (dotfiles) of various programs I use. -** compton -:PROPERTIES: -:header-args+: :tangle ~/.config/compton.conf -:END: - -#+begin_src conf :tangle no -# Shadow -shadow = false; # Enabled client-side shadows on windows. -no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows. -no-dnd-shadow = true; # Don't draw shadows on DND windows. -clear-shadow = true; # Zero the part of the shadow's mask behind the - # window. Fix some weirdness with ARGB windows. -shadow-radius = 5; # The blur radius for shadows. (default 12) -shadow-offset-x = -5; # The left offset for shadows. (default -15) -shadow-offset-y = -5; # The top offset for shadows. (default -15) -# shadow-opacity = 0.7; # The translucency for shadows. (default .75) -# shadow-red = 0.0; # Red color value of shadow. (0.0 - 1.0, defaults to 0) -# shadow-green = 0.0; # Green color value of shadow. (0.0 - 1.0, defaults to 0) -# shadow-blue = 0.0; # Blue color value of shadow. (0.0 - 1.0, defaults to 0) -shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ]; # Exclude conditions for shadows. -# shadow-exclude = "n:e:Notification"; -#shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications -shadow-ignore-shaped = true; # Avoid drawing shadow on all shaped windows - # (see also: --detect-rounded-corners) - -# Opacity -menu-opacity = 1.0; # The opacity for menus. (default 1.0) -#inactive-opacity = 0.9; # Default opacity of inactive windows. (0.0 - 1.0) -# active-opacity = 0.8; # Default opacity for active windows. (0.0 - 1.0) -frame-opacity = 1.0; # Opacity of window titlebars and borders. (0.1 - 1.0) -# inactive-opacity-override = true; # Let inactive opacity set by 'inactive-opacity' overrides - # value of _NET_WM_OPACITY. Bad choice. -alpha-step = 0.06; # XRender backend: Step size for alpha pictures. Increasing - # it may result in less X resource usage, - # Yet fading may look bad. -#inactive-dim = 0.5; # Dim inactive windows. (0.0 - 1.0) -#inactive-dim-fixed = true; # Do not let dimness adjust based on window opacity. -# blur-background = true; # Blur background of transparent windows. - # Bad performance with X Render backend. - # GLX backend is preferred. -# blur-background-frame = true; # Blur background of opaque windows with transparent - # frames as well. -blur-background-fixed = true; # Do not let blur radius adjust based on window opacity. -blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ]; - # Exclude conditions for background blur. - -# Fading -fading = false; # Fade windows during opacity changes. -fade-delta = 3; # The time between steps in a fade in milliseconds. (default 10). -fade-in-step = 0.03; # Opacity change between steps while fading in. (default 0.028). -fade-out-step = 0.03; # Opacity change between steps while fading out. (default 0.03). -# no-fading-openclose = true; # Avoid fade windows in/out when opening/closing. -fade-exclude = [ ]; # Exclude conditions for fading. - -# Other -backend = "glx" # Backend to use: "xrender" or "glx". GLX backend is typically - # much faster but depends on a sane driver. -mark-wmwin-focused = true; # Try to detect WM windows and mark them as active. -mark-ovredir-focused = true; # Mark all non-WM but override-redirect windows active (e.g. menus). -use-ewmh-active-win = true; # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused - # instead of using FocusIn/Out events. Usually more reliable but - # depends on a EWMH-compliant WM. -detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on. -detect-client-opacity = true; # Detect _NET_WM_OPACITY on client windows, useful for window - # managers not passing _NET_WM_OPACITY of client windows to frame - # windows. -refresh-rate = 0; # For --sw-opti: Specify refresh rate of the screen. 0 for auto. -vsync = "drm"; # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc" - # See man page for more details. -dbe = false; # Enable DBE painting mode. Rarely needed. -paint-on-overlay = true; # Painting on X Composite overlay window. Recommended. -sw-opti = false; # Limit compton to repaint at most once every 1 / refresh_rate. - # Incompatible with certain VSync methods. -unredir-if-possible = false; # Unredirect all windows if a full-screen opaque window is - # detected, to maximize performance for full-screen windows. -focus-exclude = [ ]; # A list of conditions of windows that should always be considered - # focused. -detect-transient = true; # Use WM_TRANSIENT_FOR to group windows, and consider windows in - # the same group focused at the same time. -detect-client-leader = true; # Use WM_CLIENT_LEADER to group windows. -invert-color-include = [ ]; # Conditions for windows to be painted with inverted color. - -# GLX backend # GLX backend fine-tune options. See man page for more info. -glx-no-stencil = true; # Recommended. -glx-copy-from-front = false; # Useful with --glx-swap-method, -# glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync. -# glx-no-rebind-pixmap = true; # Recommended if it works. -glx-no-rebind-pixmap = true; # Recommended if it works. -#glx-swap-method = "4"; # See man page. -glx-swap-method = "4"; # See man page. - -# Window type settings -wintypes: -{ - tooltip = { fade = true; shadow = false; opacity = 1; focus = true; }; - menu = { shadow = false; }; - dropdown_menu = { shadow = false; }; - popup_menu = { shadow = false; }; - utility = { shadow = false; }; - # fade: Fade the particular type of windows. - # shadow: Give those windows shadow - # opacity: Default opacity for the type of windows. - # focus: Whether to always consider windows of this type focused. -}; -#+end_src - -** dovecot -:PROPERTIES: -:header-args+: :tangle "/sudo::/etc/dovecot/dovecot.conf" -:END: - -#+begin_src conf -protocols = imap - -listen = 127.0.0.1 -log_path = /var/log/dovecot.log -info_log_path = /var/log/dovecot-info.log - -ssl = no -disable_plaintext_auth = no - -auth_verbose = yes -auth_mechanisms = plain - -passdb { - driver = passwd-file - args = /etc/dovecot/passwd -} - -userdb { - driver = static - args = uid=amin gid=amin home=/home/amin/mail/%d/%n - default_fields = mail=maildir:/home/amin/mail/%d/%n/mail -} - -# mail_home = /home/amin/mail/%d/%n -# mail_location = maildir:/home/amin/mail/%d/%n/mail:LAYOUT=fs:INBOX=/home/amin/mail/%d/%n/mail/Inbox - -# namespace { -# inbox = yes -# separator = / -# } - -mail_plugins = $mail_plugins fts fts_lucene - -plugin { - fts = lucene - fts_lucene = whitespace_chars=@. - fts_autoindex = yes -} -#+end_src - -** Dunst -:PROPERTIES: -:header-args+: :tangle ~/.config/dunst/dunstrc -:END: - -#+begin_src conf -[global] -#font = Ubuntu Mono 10.5 -font = Inconsolata 11 - -# Path to default icons. -icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/ - -icon_position = left -# bold -# italic -# strikethrough -# underline -markup = full -# The format of the message. Possible variables are: -# %a appname -# %s summary -# %b body -# %i iconname (including its path) -# %I iconname (without its path) -# %p progress value if set ([ 0%] to [100%]) or nothing -# Markup is allowed -format = "%s\n%b" -# Sort messages by urgency -sort = yes -# Show how many messages are currently hidden (because of geometry) -indicate_hiddenl= no -# Alignment of message text. -# Possible values are "left", "center" and "right" -alignment = center -# The frequency with wich text that is longer than the notification -# window allows bounces back and forth. -# This option conflicts with 'word_wrap'. -# Set to 0 to disable -bounce_freq = 3 -# show age of message if message is older than show_age_threshold seconds. -# set to -1 to disable -show_age_threshold = -1 -# split notifications into multiple lines if they don't fit into geometry -word_wrap = yes -# ignore newlines '\n' in notifications -ignore_newline = no -# The geometry of the message window. -# geometry [{width}]x{height}][+/-{x}+/-{y}] -# The height is measured in number of notifications everything else in pixels. If the width -# is omitted but the height is given ("-geometry x2"), the message window -# expands over the whole screen (dmenu-like). If width is 0, -# the window expands to the longest message displayed. -# A positive x is measured from the left, a negative from the -# right side of the screen. Y is measured from the top and down respectevly. -# The width can be negative. In this case the actual width is the -# screen width minus the width defined in within the geometry option. -#geometry = "410x12-12+12" -#geometry = "0x0-30-30" -geometry = "260x12-30-30" -# The transparency of the window. range: [0; 100] -# This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..) -transparency = 0 -# Don't remove messages, if the user is idle (no mouse or keyboard input) -# for longer than idle_threshold seconds. -# Set to 0 to disable. -idle_threshold = 120 -# Which monitor should the notifications be displayed on. -monitor = 0 -# Display notification on focused monitor. Possible modes are: -# mouse: follow mouse pointer -# keyboard: follow window with keyboard focus -# none: don't follow anything -# -# "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property. -# This should be the case for almost all modern windowmanagers. -# -# If this option is set to mouse or keyboard, the monitor option will be -# ignored. -follow = keyboard -# should a notification popped up from history be sticky or -# timeout as if it would normally do. -sticky_history = yes -# The height of a single line. If the height is smaller than the font height, -# it will get raised to the font height. -# This adds empty space above and under the text. -line_height = 0 - -show_indicators = yes - -# Draw a line of 'separatpr_height' pixel height between two notifications. -# Set to 0 to disable -separator_height = 3 -# padding between text and separator -padding = 8 -# horizontal padding -horizontal_padding = 8 -# Define a color for the separator. -# possible values are: -# * auto: dunst tries to find a color fitting to the background -# * foreground: use the same color as the foreground -# * frame: use the same color as the frame. -# * anything else will be interpreted as a X color -separator_color = foreground -# print a notification on startup -# This is mainly for error detection, since dbus (re-)starts dunst -# automatically after a crash. -startup_notification = false -# dmenu path -#dmenu = /usr/bin/dmenu -p dunst: -dmenu = /usr/bin/rofi -dmenu -p dunst: -# browser for opening urls in context menu -browser = /usr/bin/firefox -new-tab -[frame] -width = 0 -color = "#377222" -[shortcuts] -# shortcuts are specified as [modifier+][modifier+]...key -# available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3' -# and 'mod4' (windows-key) -# xev might be helpful to find names for keys -# close notification -close = ctrl+space -# close all notifications -close_all = ctrl+shift+space -# redisplay last message(s) -# On the US keyboard layout 'grave' is normally above TAB and left of '1'. -history = ctrl+shift+h -# context menu -context = ctrl+shift+period -[urgency_low] -# IMPORTANT: colors have to be defined in quotation marks. -# Otherwise the '#' and following would be interpreted as a comment. -background = "#1d2a30" -foreground = "#71c2af" -timeout = 3 -[urgency_normal] -background = "#1d2a30" -foreground = "#71c2af" -timeout = 0 -[urgency_critical] -background = "#1d2a30" -foreground = "#ff9982" -timeout = 0 - -# Every section that isn't one of the above is interpreted as a rules -# to override settings for certain messages. -# Messages can be matched by 'appname', 'summary', 'body' or 'icon' -# and you can override the 'timeout', 'urgency', 'foreground', 'background' -# and 'format'. -# Shell-like globbing will get expanded. -# -# SCRIPTING -# you can specify a script that gets run when the rule matches by setting -# the 'script' option. -# The script will be called as follows: -# script appname summary body icon urgency -# where urgency can be "LOW", "NORMAL" or "CRITICAL". -# -# NOTE: if you don't want a notification to be displayed, set the format to "" -# NOTE: It might be helpful to run dunst -print in a terminal in order to find -# fitting options for rules. -#[espeak] -# summary = "*" -# script = dunst_espeak.sh -#[script-test] -# summary = "*script*" -# script = dunst_test.sh -#[ignore] -## This notification will not be displayed -# summary = "foobar" -# format = "" -#[signed_on] -# appname = Pidgin -# summary = "*signed on*" -# urgency = low -# -#[signed_off] -# appname = Pidgin -# summary = *signed off* -# urgency = low -# -#[says] -# appname = Pidgin -# summary = *says* -# urgency = critical -# -#[twitter] -# appname = Pidgin -# summary = *twitter.com* -# urgency = normal -# -[xfpm-backlight] - summary = *Brightness* - urgency = low -#+end_src - -** Fontconfig -:PROPERTIES: -:header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none -:END: - -#+begin_src xml - - - - - - rgb - - - - - true - - - - - hintslight - - - - - true - - - - - lcddefault - - - ~/.fonts - - - - Helvetica - - Liberation Sans - - - -#+end_src - -** getmail - -*** getmailrc -:PROPERTIES: -:header-args+: :tangle ~/.getmail/getmailrc -:END: - -#+begin_src conf -[retriever] -type = SimplePOP3SSLRetriever -server = fencepost.gnu.org -username = bandali -password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg") -port = 995 -use_apop = True - -[destination] -type = Maildir -path = ~/mail/gnu/Inbox/ - -[options] -delete = True -#+end_src - -*** getmail.service -:PROPERTIES: -:header-args+: :tangle ~/.config/systemd/user/getmail.service -:END: - -#+begin_src conf :tangle no -[Unit] -Description=getmail service - -[Service] -Type=oneshot -ExecStart=/usr/bin/getmail -StandardOutput=syslog -StandardError=syslog -#+end_src - -*** getmail.timer -:PROPERTIES: -:header-args+: :tangle ~/.config/systemd/user/getmail.timer -:END: - -#+begin_src conf :tangle no -[Unit] -Description=getmail timer - -[Timer] -OnCalendar=*:0/30 -Persistent=true -Unit=getmail.service - -[Install] -WantedBy=timers.target -#+end_src - -** Git - -*** gitconfig -:PROPERTIES: -:header-args+: :tangle ~/.gitconfig -:END: - -**** user -#+begin_src conf -[user] - name = Amin Bandali - email = bandali@gnu.org - signingkey = BE6273738E616D6D1B3A08E8A21A020248816103 -#+end_src - -**** signing -#+begin_src conf -[commit] - gpgsign = true -# [format] -# signoff = true -#+end_src - -**** core -#+begin_src conf -[core] - autocrlf = input # CRLF -> LF on commit - editor = emacsclient -t - excludesfile = ~/.gitignore_global - pager = "less" -#+end_src - -**** gpg -#+begin_src conf -[gpg] - program = gpg2 -#+end_src - -**** alias -#+begin_src conf -[alias] - git = !exec git # handle nested git calls, e.g. git git status - aliases = config --get-regexp '^alias\\.' - a = add - s = status - sl = status --long - c = checkout - cb = checkout -b - b = branch - r = rebase - p = pull - pr = pull --rebase - ps = push - psf = push --force - nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f" - nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f" -#+end_src - -**** color -#+begin_src conf -[color] - ui = auto -[color "status"] - added = green bold - changed = red bold - untracked = red bold -[color "branch"] - current = green bold - remote = magenta bold -[color "diff"] - new = green bold - old = red bold -#+end_src - -**** status -#+begin_src conf -[status] - # showUntrackedFiles = all - short=true - branch=true -#+end_src - -**** github -#+begin_src conf -[github] - user = aminb -#+end_src - -**** send-email -#+begin_src conf -[sendemail] - smtpuser = bandali - smtpserver = fencepost.gnu.org - smtpserverport = 587 - smtpencryption = tls - annotate = yes -#+end_src - -*** gitignore -:PROPERTIES: -:header-args+: :tangle ~/.gitignore_global -:END: - -#+begin_src conf -*.orig -*.py[co] -*.sublime-workspace -*~ -.DS_Store -*.elc -*-autoloads.el -#+end_src - -** GnuPG -:PROPERTIES: -:header-args+: :tangle ~/.gnupg/gpg-agent.conf -:END: - -#+begin_src conf -default-cache-ttl 43200 -max-cache-ttl 43200 - -default-cache-ttl-ssh 10800 -max-cache-ttl-ssh 10800 - -# pinentry-program /usr/bin/pinentry-qt -#+end_src - -** GTK - -*** gtk-2.0 -:PROPERTIES: -:header-args+: :tangle ~/.gtkrc-2.0 -:END: - -#+begin_src conf -gtk-theme-name="Greybird" -gtk-icon-theme-name="Paper" -gtk-font-name="Ubuntu 10" -gtk-menu-images=0 -# gtk-key-theme-name = "Emacs" -#+end_src - -*** gtk-3.0 -:PROPERTIES: -:header-args+: :tangle ~/.config/gtk-3.0/settings.ini -:END: - -#+begin_src conf :tangle no -[Settings] -gtk-icon-theme-name = Paper -# gtk-theme-name = Adwaita - -gtk-theme-name = Greybird -# gtk-theme-name = Arc-Darker -# gtk-theme-name = Numix-ArchBlue - -gtk-font-name = Ubuntu 10 -# gtk-key-theme-name = Emacs -#+end_src - -** [[https://github.com/Leinnan/i3gs][i3gs]] -:PROPERTIES: -:header-args+: :tangle ~/.config/i3gs/config -:END: - -#+begin_src conf :comments none :tangle no -borders_width=0 0 2 0 -separator_width=10 - -#[mpd] -#preset=MPD -#title=  -#borders_color=#7FDBFF - -[ram] -preset=RAM -title=  -borders_color=#3D9970 - -#[cpu] -#preset=CPU -#title=  -#borders_color=#2ECC40 - -#[hdd] -#preset=HDD -#title=  -#borders_color=#01FF70 - -[volume] -command=volume-info -title= -borders_color=#7FDBFF - -[battery] -preset=BAT -command=battery-percentage-time -title=  -borders_color=#39CCCC - -[wifi] -preset=WIFI -title=  -borders_color=#01FF70 - -[date] -preset=DATE -command=date '+%-I:%M, %a %b %d ' -title=  -borders_color=#FFDC00 -separator_width=0 -#+end_src - -** i3status -:PROPERTIES: -:header-args+: :tangle ~/.config/i3status/config -:END: - -#+begin_src conf :comments none -# i3status configuration file. -# see "man i3status" for documentation. - -# It is important that this file is edited as UTF-8. -# The following line should contain a sharp s: -# ß -# If the above line is not correctly displayed, fix your editor first! - -general { - colors = true - interval = 5 - output_format = "i3bar" -} - -# order += "ipv6" -order += "disk /" -order += "disk /data" -# order += "wireless _first_" -order += "ethernet _first_" -order += "battery 0" -order += "volume master" -order += "load" -order += "tztime local" - -wireless _first_ { - format_up = "W:%quality %essid %ip" - format_down = "W: down" -} - -ethernet _first_ { - # if you use %speed, i3status requires root privileges - format_up = "E: %ip (%speed)" - format_down = "E: down" -} - -battery 0 { - format = "%status %percentage %remaining (%consumption)" - path = "/sys/class/power_supply/BAT%d/uevent" - low_threshold = "10" - threshold_type = "percentage" - last_full_capacity = true - integer_battery_capacity = true - hide_seconds = true -} - -tztime local { - format = "%-I:%M%P %a %b %d" -} - -volume master { - format = "♪ %volume" - format_muted = "🔇 %volume" - device = "pulse" -} - -load { - format = "%1min" -} - -disk "/" { - format = "/ %avail" -} - -disk "/data" { - format = "/data %avail" -} -#+end_src - -** isync - -*** mbsyncrc -:PROPERTIES: -:header-args+: :tangle ~/.mbsyncrc -:END: - -#+begin_src conf -# Global defaults -CopyArrivalDate yes -Create Both -Expunge Both - -###### -IMAPAccount amin -Host mail.aminb.org -User amin@aminb.org -PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg" -SSLType IMAPS - -IMAPStore amin-remote -Account amin - -IMAPAccount amin-dovecot -Host 127.0.0.1 -Port 143 -User amin@aminb.org -PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin-dovecot.gpg" -SSLType None - -IMAPStore amin-local -Account amin-dovecot - -Channel amin -Master :amin-remote: -Slave :amin-local: -Patterns * - -###### -IMAPAccount uwaterloo -Host connect.uwaterloo.ca -User abandali -PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg" -SSLType IMAPS - -IMAPStore uwaterloo-remote -Account uwaterloo - -IMAPAccount uwaterloo-dovecot -Host 127.0.0.1 -Port 143 -User abandali@uwaterloo.ca -PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo-dovecot.gpg" -SSLType None - -IMAPStore uwaterloo-local -Account uwaterloo-dovecot - -Channel uwaterloo -Master :uwaterloo-remote: -Slave :uwaterloo-local: -Patterns * -#+end_src - -*** mbsync.service -:PROPERTIES: -:header-args+: :tangle ~/.config/systemd/user/mbsync.service -:END: - -#+begin_src conf :tangle no -[Unit] -Description=mbsync service - -[Service] -Type=oneshot -ExecStart=/usr/bin/mbsync -Va -StandardOutput=syslog -StandardError=syslog -#+end_src - -*** mbsync.timer -:PROPERTIES: -:header-args+: :tangle ~/.config/systemd/user/mbsync.timer -:END: - -#+begin_src conf :tangle no -[Unit] -Description=mbsync timer - -[Timer] -OnCalendar=*:0/15 -Persistent=true -Unit=mbsync.service - -[Install] -WantedBy=timers.target -#+end_src - -** Latexmk -:PROPERTIES: -:header-args+: :tangle ~/.latexmkrc -:END: - -#+begin_src conf -$pdf_previewer = "start zathura %O %S"; -$clean_ext = "aux out"; - -# $pdf_update_method = 4; -# $pdf_update_command = "zathura %O %S"; - -# Synctex allows one to jump to from the PDF in Zathura to the source in Emacs -# by Ctrl+click in the PDF. -# Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex -# editor. -# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S'; -#+end_src - -** libinput - -Improve XPS 15 9560's touchpad experience. - -# begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf") -#+begin_src conf :tangle no -Section "InputClass" - Identifier "libinput touchpad catchall" - Driver "libinput" - MatchIsTouchpad "on" - Option "ClickMethod" "clickfinger" - Option "NaturalScrolling" "true" - Option "Tapping" "on" - Option "TappingButtonMap" "lrm" -EndSection -#+end_src - ** mpd :PROPERTIES: :header-args+: :tangle ~/.config/mpd/mpd.conf @@ -1304,64 +429,6 @@ audio_output { ############################################################################### #+end_src -** msmtp -:PROPERTIES: -:header-args+: :tangle ~/.msmtprc -:END: - -#+begin_src conf -# Set default values for all following accounts. -defaults -port 587 -tls on -auth on -#tls_trust_file /etc/ssl/certs/ca-certificates.crt -logfile ~/.msmtp.log - -# aminb -account aminb -host mail.aminb.org -# use `msmtp -a aminb --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint -tls_fingerprint DE:5F:73:0C:F7:9A:7B:1D:55:AA:49:28:E7:28:49:24:A4:08:55:00:7A:7E:D8:7F:30:06:26:24:11:29:61:07 -tls_starttls on -from amin@aminb.org -user amin@aminb.org -passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg - -account bandali-me : aminb -from amin@bandali.me - -# gnu -account gnu -host fencepost.gnu.org -# use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint -tls_fingerprint 93:59:52:1D:A6:95:13:31:7C:81:ED:DB:A5:BA:B5:2B:C8:BC:38:3E:71:A5:DF:8C:80:46:C1:E0:5D:2D:F4:E3 -tls_starttls on -from bandali@gnu.org -user bandali -passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg - -# gnu (old) -account gnu-aminb : gnu -from aminb@gnu.org -account gnu-amin : gnu -from amin@gnu.org -account gnu-mab : gnu -from mab@gnu.org - -# uwaterloo -account uwaterloo -host connect.uwaterloo.ca -tls_starttls on -from abandali@uwaterloo.ca -user abandali -passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg -tls_trust_file /etc/ssl/certs/ca-certificates.crt - -# Set a default account -account default : aminb -#+end_src - ** ncmpcpp *** config @@ -1939,233 +1006,10 @@ def_key "K" move_sort_order_up #+end_src -** notmuch - -*** notmuch-config -:PROPERTIES: -:header-args+: :tangle ~/.notmuch-config -:END: - -#+begin_src conf -# .notmuch-config - Configuration file for the notmuch mail system -# -# For more information about notmuch, see https://notmuchmail.org - -# Database configuration -# -# The only value supported here is 'path' which should be the top-level -# directory where your mail currently exists and to where mail will be -# delivered in the future. Files should be individual email messages. -# Notmuch will store its database within a sub-directory of the path -# configured here named ".notmuch". -# -[database] -path=/home/amin/oldmail - -# User configuration -# -# Here is where you can let notmuch know how you would like to be -# addressed. Valid settings are -# -# name Your full name. -# primary_email Your primary email address. -# other_email A list (separated by ';') of other email addresses -# at which you receive email. -# -# Notmuch will use the various email addresses configured here when -# formatting replies. It will avoid including your own addresses in the -# recipient list of replies, and will set the From address based on the -# address to which the original email was addressed. -# -[user] -name=Amin Bandali -primary_email=amin@aminb.org -other_email=bandali@gnu.org;abandali@uwaterloo.ca; - -# Configuration for "notmuch new" -# -# The following options are supported here: -# -# tags A list (separated by ';') of the tags that will be -# added to all messages incorporated by "notmuch new". -# -# ignore A list (separated by ';') of file and directory names -# that will not be searched for messages by "notmuch new". -# -# NOTE: *Every* file/directory that goes by one of those -# names will be ignored, independent of its depth/location -# in the mail store. -# -[new] -tags=new; -#tags=unread;inbox; -ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/ - -# Search configuration -# -# The following option is supported here: -# -# exclude_tags -# A ;-separated list of tags that will be excluded from -# search results by default. Using an excluded tag in a -# query will override that exclusion. -# -[search] -exclude_tags=deleted;spam; - -# Maildir compatibility configuration -# -# The following option is supported here: -# -# synchronize_flags Valid values are true and false. -# -# If true, then the following maildir flags (in message filenames) -# will be synchronized with the corresponding notmuch tags: -# -# Flag Tag -# ---- ------- -# D draft -# F flagged -# P passed -# R replied -# S unread (added when 'S' flag is not present) -# -# The "notmuch new" command will notice flag changes in filenames -# and update tags, while the "notmuch tag" and "notmuch restore" -# commands will notice tag changes and update flags in filenames -# -[maildir] -synchronize_flags=true - -# Cryptography related configuration -# -# The following option is supported here: -# -# gpg_path -# binary name or full path to invoke gpg. -# -[crypto] -gpg_path=gpg -#+end_src - -*** pre-new hook -:PROPERTIES: -:header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh" -:END: - -#+begin_src sh -touch /tmp/gnusieve.log -sieve-filter -eW -o postmaster_address=postmaster@aminb.org \ - -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log -#+end_src - -*** post-new hook -:PROPERTIES: -:header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh" -:END: - -#+begin_src sh -# apply sent tag to messages sent by me -notmuch tag -new +sent -- from:amin@aminb.org or from:bandali@gnu.org or from:aminb@gnu.org or from:amin@gnu.org or from:mab@gnu.org or from:abandali@uwaterloo.ca - -# initial tagging -notmuch tag -latest -- tag:latest -notmuch tag +inbox +unread +latest -new -- tag:new - - -# apply tags to lists - -# -notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter -notmuch tag -inbox +lists/haskell-weekly -- folder:amin/lists/haskell-weekly - -notmuch tag -inbox +pay -- folder:amin/pay -notmuch tag -inbox +banking -- folder:amin/banking -notmuch tag -inbox +work -- folder:amin/work -# - -# -notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136 -notmuch tag -inbox +uw/cs846 -- folder:uwaterloo/lists/cs846 -notmuch tag -inbox +uw/ece750 -- folder:uwaterloo/lists/ece750 -notmuch tag -inbox +uw/se212 -- folder:uwaterloo/lists/se212 -notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463 - -notmuch tag -inbox +lists/alloytools -- folder:uwaterloo/lists/alloytools -notmuch tag -inbox +lists/clvsingle -- folder:uwaterloo/lists/Clvsingle -notmuch tag -inbox +lists/gsa -- folder:uwaterloo/lists/GSA -notmuch tag -inbox +lists/math-grad -- folder:uwaterloo/lists/Math-grad -notmuch tag -inbox +lists/scs-grads -- folder:uwaterloo/lists/scs-grads -notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students -# - -# -notmuch tag -inbox +l/emacs-devel -- folder:gnu/l/emacs-devel -notmuch tag -inbox +l/emacs-orgmode -- folder:gnu/l/emacs-orgmode -notmuch tag -inbox +l/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss -notmuch tag -inbox +l/fencepost-users -- folder:gnu/l/fencepost-users -notmuch tag -inbox +l/guix-devel -- folder:gnu/l/guix-devel -notmuch tag -inbox +l/guile-devel -- folder:gnu/l/guile-devel -notmuch tag -inbox +l/help-gnu-emacs -- folder:gnu/l/help-gnu-emacs -notmuch tag -inbox +l/info-gnu-emacs -- folder:gnu/l/info-gnu-emacs -notmuch tag -inbox +l/www-commits -- folder:gnu/l/www-commits -notmuch tag -inbox +l/www-discuss -- folder:gnu/l/www-discuss -notmuch tag -inbox +webmasters -- folder:gnu/webmasters - -notmuch tag -inbox +l/deepspec -- folder:gnu/l/deepspec -notmuch tag -inbox +l/haskell-cafe -- folder:gnu/l/haskell-cafe -notmuch tag -inbox +l/haskell-art -- folder:gnu/l/haskell-art -notmuch tag -inbox +l/notmuch -- folder:gnu/l/notmuch - -notmuch tag -inbox +l/~aminb/test-priv -- folder:gnu/l/~aminb/test-priv -notmuch tag -inbox +l/~sircmpwn/sr.ht-admins -- folder:gnu/l/~sircmpwn/sr.ht-admins -notmuch tag -inbox +l/~sircmpwn/sr.ht-announce -- folder:gnu/l/~sircmpwn/sr.ht-announce -notmuch tag -inbox +l/~sircmpwn/sr.ht-dev -- folder:gnu/l/~sircmpwn/sr.ht-dev -notmuch tag -inbox +l/~sircmpwn/sr.ht-discuss -- folder:gnu/l/~sircmpwn/sr.ht-discuss -# - -notmuch tag -inbox -unread +archive/notmuch -- path:archive/notmuch/** -notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/** -#+end_src - -*** notmuch.service -:PROPERTIES: -:header-args+: :tangle ~/.config/systemd/user/notmuch.service -:END: - -#+begin_src conf :tangle no -[Unit] -Description=notmuch service - -[Service] -Type=oneshot -ExecStart=/usr/bin/notmuch new -StandardOutput=syslog -StandardError=syslog -#+end_src - -*** notmuch.timer -:PROPERTIES: -:header-args+: :tangle ~/.config/systemd/user/notmuch.timer -:END: - -#+begin_src conf :tangle no -[Unit] -Description=notmuch timer - -[Timer] -OnCalendar=*:0/5 -Persistent=true -Unit=notmuch.service - -[Install] -WantedBy=timers.target -#+end_src - ** pigeonhole *** amin.sieve :PROPERTIES: -:header-args+: :tangle ~/mail/aminb.org/amin/sieve/amin.sieve :comments none +:header-args+: :tangle ~/mail/bndl.org/amin/sieve/amin.sieve :comments none :END: #+begin_src conf @@ -2184,7 +1028,7 @@ include :personal "lists"; *** lists.sieve :PROPERTIES: -:header-args+: :tangle ~/mail/aminb.org/amin/sieve/lists.sieve :comments none +:header-args+: :tangle ~/mail/bndl.org/amin/sieve/lists.sieve :comments none :END: #+begin_src conf @@ -2235,26 +1079,9 @@ if anyof ( } #+end_src -** PowerTOP +** redshift :PROPERTIES: -:header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service" -:END: - -#+begin_src conf -[Unit] -Description=Powertop tunings - -[Service] -ExecStart=/usr/bin/powertop --auto-tune -RemainAfterExit=true - -[Install] -WantedBy=multi-user.target -#+end_src - -** redshift -:PROPERTIES: -:header-args+: :tangle ~/.config/redshift.conf :comments none +:header-args+: :tangle ~/.config/redshift.conf :comments none :END: #+begin_src conf @@ -2325,460 +1152,13 @@ adjustment-method=randr ;screen=1 #+end_src -** rofi -:PROPERTIES: -:header-args+: :tangle ~/.config/rofi/config -:END: - -#+begin_src conf -! rofi.font: Ubuntu Mono 13 -! rofi.font: Inconsolata 16 -! rofi.font: Iosevka 13 -! rofi.font: Source Code Pro 11 -rofi.font: Source Code Pro 10.5 -rofi.modi: run,window -! rofi.width: 640 -rofi.width: 600 -!rofi.location: 2 -!rofi.yoffset: 200 -rofi.monitor: -1 -!rofi.lines: 10 - -!rofi.theme: /usr/share/rofi/themes//Arc.rasi -!rofi.theme: /usr/share/rofi/themes//Paper.rasi -!rofi.theme: /usr/share/rofi/themes//sidebar.rasi - -rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi -#+end_src - -** rofi-pass -:PROPERTIES: -:header-args+: :tangle ~/.config/rofi-pass/config -:END: - -#+begin_src conf -# permanently set alternative root dir -# root=/path/to/root - -# rofi command. Make sure to have "$@" as last argument -_rofi () { - #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@" - rofi -i -no-auto-select -kb-accept-entry "!Return" "$@" -} - -# xdotool needs the keyboard layout to be set using setxkbmap -# You can do this in your autostart scripts (e.g. xinitrc) - -# If for some reason, you cannot do this, you can set the command here. -# and set fix_layout to true -fix_layout=false - -layout_cmd () { - setxkbmap us -} - -# fields to be used -URL_field='url' -USERNAME_field='user' -AUTOTYPE_field='autotype' - -# delay to be used for :delay keyword -delay=2 - -## Programs to be used -# Editor -EDITOR='gvim -f' - -# Browser -BROWSER='chromium' - -## Misc settings - -default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl -auto_enter='false' -notify='false' -default_autotype='user :tab pass' - -# color of the help messages -# leave empty for autodetection -help_color="#4872FF" - -# Clipboard settings -# Possible options: primary, clipboard, both -clip=primary - -# Options for generating new password entries -# default_user is also used for password files that have no user field. -default_user=aminb -default_user2=aminban -password_length=30 - -# Custom Keybindings -#autotype="Alt+1" -autotype="Alt+m" -type_user="Alt+2" -type_pass="Alt+3" -open_url="Alt+4" -copy_name="Alt+u" -copy_url="Alt+l" -copy_pass="Alt+p" -show="Alt+o" -copy_entry="Alt+2" -type_entry="Alt+1" -copy_menu="Alt+c" -action_menu="Alt+a" -type_menu="Alt+t" -help="Alt+h" -switch="Alt+x" -insert_pass="Alt+n" -#+end_src - -** sway - -*** main -:PROPERTIES: -:header-args+: :tangle ~/.config/sway/config -:END: - -#+begin_src conf -### Variables -# super -set $mod Mod4 -# alt -set $mod2 Mod1 -set $left h -set $down j -set $up k -set $right l -set $term urxvt -set $menu rofi -show run -display-run '> ' -display-window ' 🗔 ' - -### Output configuration -# -# Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/) -output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill -# -# Example configuration: -# -# output HDMI-A-1 resolution 1920x1080 position 1920,0 -# -# You can get the names of your outputs by running: swaymsg -t get_outputs - -### Idle configuration - -exec swayidle \ - timeout 120 '[ -f ~/.nosleep ] || swaymsg "output * dpms off"' \ - resume '[ -f ~/.nosleep ] || swaymsg "output * dpms on"' \ - - -### Key bindings -# -# Basics: -# - # start a terminal - bindsym $mod+Return exec $term -name floating - bindsym $mod+Shift+Return exec $term - for_window [class="URxvt" instance="floating"] floating enable - - # kill focused window - bindsym $mod+Shift+q kill - - # start your launcher - bindsym $mod+d exec $menu - - # password manager - bindsym $mod2+space exec rofi-pass - - # Drag floating windows by holding down $mod and left mouse button. - # Resize them with right mouse button + $mod. - # Despite the name, also works for non-floating windows. - # Change normal to inverse to use left mouse button for resizing and right - # mouse button for dragging. - floating_modifier $mod normal - - # reload the configuration file - bindsym $mod+Shift+c reload - - # exit sway (logs you out of your wayland session) - # bindsym $mod+Shift+e exit - - bindsym $mod+apostrophe exec rofi-light # rofi-based brightness chooser - bindsym XF86MonBrightnessUp exec light -A 5 # increase screen brightness - bindsym XF86MonBrightnessDown exec light -U 5 # decrease screen brightness - - bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5 - bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5 - bindsym XF86AudioMute exec pamixer --toggle-mute - bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle - - bindsym $mod+Shift+apostrophe exec rofi-remmina.py # choose remmina connection - - # original sway workspace switch and window move - bindsym $mod+bracketleft workspace prev - bindsym $mod+bracketright workspace next - bindsym $mod+braceleft move container to workspace prev - bindsym $mod+braceright move container to workspace next - - # bspwm-esque workspace switch and window move - bindsym $mod2+bracketleft exec sway-ws-util switch prev - bindsym $mod2+bracketright exec sway-ws-util switch next - bindsym $mod2+braceleft exec sway-ws-util move prev follow - bindsym $mod2+braceright exec sway-ws-util move next follow -# -# Moving around: -# - # Move your focus around - bindsym $mod+$left focus left - bindsym $mod+$down focus down - bindsym $mod+$up focus up - bindsym $mod+$right focus right - # or use $mod+[up|down|left|right] - bindsym $mod+Left focus left - bindsym $mod+Down focus down - bindsym $mod+Up focus up - bindsym $mod+Right focus right - - # _move_ the focused window with the same, but add Shift - bindsym $mod+Shift+$left move left - bindsym $mod+Shift+$down move down - bindsym $mod+Shift+$up move up - bindsym $mod+Shift+$right move right - # ditto, with arrow keys - bindsym $mod+Shift+Left move left - bindsym $mod+Shift+Down move down - bindsym $mod+Shift+Up move up - bindsym $mod+Shift+Right move right -# -# Workspaces: -# - # switch to workspace - bindsym $mod+1 workspace 1 - bindsym $mod+2 workspace 2 - bindsym $mod+3 workspace 3 - bindsym $mod+4 workspace 4 - bindsym $mod+5 workspace 5 - bindsym $mod+6 workspace 6 - bindsym $mod+7 workspace 7 - bindsym $mod+8 workspace 8 - bindsym $mod+9 workspace 9 - bindsym $mod+0 workspace 10 - # move focused container to workspace - bindsym $mod+Shift+1 move container to workspace 1 - bindsym $mod+Shift+2 move container to workspace 2 - bindsym $mod+Shift+3 move container to workspace 3 - bindsym $mod+Shift+4 move container to workspace 4 - bindsym $mod+Shift+5 move container to workspace 5 - bindsym $mod+Shift+6 move container to workspace 6 - bindsym $mod+Shift+7 move container to workspace 7 - bindsym $mod+Shift+8 move container to workspace 8 - bindsym $mod+Shift+9 move container to workspace 9 - bindsym $mod+Shift+0 move container to workspace 10 - # Note: workspaces can have any name you want, not just numbers. - # We just use 1-10 as the default. -# -# Layout stuff: -# - # You can "split" the current object of your focus with - # $mod+b or $mod+v, for horizontal and vertical splits - # respectively. - bindsym $mod+b splith - bindsym $mod+v splitv - - # Switch the current container between different layout styles - bindsym $mod+s layout stacking - bindsym $mod+w layout tabbed - bindsym $mod+e layout toggle split - - # Make the current focus fullscreen - bindsym $mod+f fullscreen - - # Toggle sticky-ness of the current (floating) window - bindsym $mod+$mod2+space sticky toggle - - # Toggle the current focus between tiling and floating mode - bindsym $mod+Shift+space floating toggle - - # Swap focus between the tiling area and the floating area - bindsym $mod+space focus mode_toggle - - # move focus to the parent container - bindsym $mod+a focus parent -# -# Scratchpad: -# - # Sway has a "scratchpad", which is a bag of holding for windows. - # You can send windows there and get them back later. - - # Move the currently focused window to the scratchpad - bindsym $mod+Shift+minus move scratchpad - - # Show the next scratchpad window or hide the focused scratchpad window. - # If there are multiple scratchpad windows, this command cycles through them. - bindsym $mod+minus scratchpad show -# -# Resizing containers: -# -mode "resize" { - # left will shrink the containers width - # right will grow the containers width - # up will shrink the containers height - # down will grow the containers height - bindsym $left resize shrink width 10px - bindsym $down resize grow height 10px - bindsym $up resize shrink height 10px - bindsym $right resize grow width 10px - - # ditto, with arrow keys - bindsym Left resize shrink width 10px - bindsym Down resize grow height 10px - bindsym Up resize shrink height 10px - bindsym Right resize grow width 10px - - # return to default mode - bindsym Return mode "default" - bindsym Escape mode "default" -} -bindsym $mod+Shift+r mode "resize" - -# -# Power button -# - -set $mode_system System (l)ock, (e)xit sway, (s)uspend, (h)ibernate, (r)eboot, (S)hutdown -mode "$mode_system" { - bindsym l exec swaylock, mode "default" - bindsym e exec swaymsg exit, mode "default" - bindsym s exec systemctl suspend, mode "default" - bindsym h exec systemctl hibernate, mode "default" - bindsym r exec systemctl reboot, mode "default" - bindsym Shift+s exec systemctl poweroff -i, mode "default" - - # back to normal: Enter, Escape, or q - bindsym Return mode "default" - bindsym Escape mode "default" - bindsym q mode "default" -} -# bindsym XF86PowerOff mode "$mode_system" -bindsym $mod+Shift+e mode "$mode_system" - -# -# Presentation mode -# +** systemd -bindsym $mod+$mod2+p exec ([ ! -e ~/.nosleep ] && touch ~/.nosleep || rm ~/.nosleep) && killall -USR1 i3status - -# -# Notifications -# - -bindsym $mod+Shift+n mode notifications -mode notifications { - bindsym Return exec makoctl invoke; exec makoctl dismiss; mode default - bindsym d exec makoctl dismiss; mode default - bindsym Shift+d exec makoctl dismiss -a; mode default - - bindsym Escape mode default - bindsym q mode default -} - -# -# Screenshotting -# +Keep boot messages on tty1 (see [[https://wiki.archlinux.org/index.php/getty#Have_boot_messages_stay_on_tty1][here]]) -bindsym $mod+Shift+s mode screenshot -mode screenshot { - bindsym a exec grim $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default - bindsym r exec slurp | grim -g - $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default - - bindsym Escape mode default - bindsym q mode default -} - -# -# Status Bar: -# -# Read `man 5 sway-bar` for more information about this section. -bar { - position bottom - colors { - statusline #ffffff - background #212121 - inactive_workspace #21212100 #21212100 #5c5c5c - } - status_command i3status | my-i3status.py -} - -# font pango: benis uushi 9 -# font pango: Ubuntu Mono 11 -# font pango: Inconsolata 11 -font pango: DejaVu Sans Mono 9 -# font pango: Liberation Mono 9 - -exec xrdb .Xresources -# exec pgrep -x "systemd-inhibit" || \ -# systemd-inhibit --what=handle-power-key --who=aminb \ -# --why="Handle power button in sway" sleep infinity -exec mako 2>&1 >/tmp/mako.log -exec /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1 - -include /etc/sway/config.d/* -include ~/.config/sway/`hostname` - -exec systemd-notify --ready || true - -#+end_src - -*** langa -:PROPERTIES: -:header-args+: :tangle ~/.config/sway/langa -:END: - -#+begin_src conf -input "2:7:SynPS/2_Synaptics_TouchPad" { - events disabled - dwt enabled - tap enabled - natural_scroll enabled - click_method clickfinger -} - -input "1:1:AT_Translated_Set_2_keyboard" { - repeat_delay 200 - repeat_rate 45 - xkb_layout us_ab,ir - xkb_options ctrl:nocaps,altwin:swap_alt_win,grp:shifts_toggle -} -#+end_src - -*** shemshak -:PROPERTIES: -:header-args+: :tangle ~/.config/sway/shemshak -:END: - -#+begin_src conf -input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" { - dwt enabled - tap enabled - natural_scroll enabled - middle_emulation enabled - click_method clickfinger -} - -input "1:1:AT_Translated_Set_2_keyboard" { - repeat_delay 200 - repeat_rate 45 - xkb_layout us,ir - xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle -} -#+end_src -** swaylock -:PROPERTIES: -:header-args+: :tangle ~/.config/swaylock/config -:END: - -#+begin_src conf -image=/home/amin/usr/pics/wp/wp2445784-blurred-wallpapers.jpg -scaling=fill +#+begin_src conf :tangle /sudo::/etc/systemd/system/getty@tty1.service.d/noclear.conf +[Service] +TTYVTDisallocate=no #+end_src ** TLP @@ -2788,33 +1168,43 @@ scaling=fill #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "langa")) "/sudo::/etc/default/tlp") # ------------------------------------------------------------------------------ # tlp - Parameters for power saving -# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html +# See full explanation: https://linrunner.de/en/tlp/docs/tlp-configuration.html -# Hint: some features are disabled by default, remove the leading # to enable -# them. +# Notes: +# - Some parameters are disabled, remove the leading '#' to enable # them; +# shown values are suggestions not defaults +# - Default *: intrinsic default that is effective when the parameter is missing +# or disabled by a leading '#'; use PARAM="" to disable intrinsic defaults for +# parameters with text string values +# - Default : do nothing or use kernel/hardware defaults # Set to 0 to disable, 1 to enable TLP. +# Default: 0 TLP_ENABLE=1 # Operation mode when no power supply can be detected: AC, BAT. # Concerns some desktop and embedded hardware only. +# Default: TLP_DEFAULT_MODE=AC # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC. +# Default: 0 TLP_PERSISTENT_DEFAULT=0 # Seconds laptop mode has to wait after the disk goes idle before doing a sync. # Non-zero value enables, zero disables laptop mode. +# Default: 0 (AC), 2 (BAT) DISK_IDLE_SECS_ON_AC=0 DISK_IDLE_SECS_ON_BAT=2 # Dirty page values (timeouts in secs). +# Default: 15 (AC + BAT) MAX_LOST_WORK_SECS_ON_AC=15 MAX_LOST_WORK_SECS_ON_BAT=60 -# Hint: CPU parameters below are disabled by default, remove the leading # -# to enable them, otherwise kernel default values are used. +# Note: CPU parameters below are disabled by default, remove the leading # +# to enable them, otherwise kernel defaults will be used. # Select a CPU frequency scaling governor. # Intel Core i processor with intel_pstate driver: @@ -2822,19 +1212,21 @@ MAX_LOST_WORK_SECS_ON_BAT=60 # Older hardware with acpi-cpufreq driver: # ondemand(*), powersave, performance, conservative, schedutil. # (*) is recommended. -# Hint: use tlp-stat -p to show the active driver and available governors. +# Use tlp-stat -p to show the active driver and available governors. # Important: # powersave for intel_pstate and ondemand for acpi-cpufreq are power # efficient for *almost all* workloads and therefore kernel and most # distributions have chosen them as defaults. If you still want to change, # you should know what you're doing! You *must* disable your distribution's # governor settings or conflicts will occur. +# Default: #CPU_SCALING_GOVERNOR_ON_AC=powersave #CPU_SCALING_GOVERNOR_ON_BAT=powersave # Set the min/max frequency available for the scaling governor. -# Possible values strongly depend on your CPU. For available frequencies see +# Possible values depend on your CPU. For available frequencies see # the output of tlp-stat -p. +# Default: #CPU_SCALING_MIN_FREQ_ON_AC=0 #CPU_SCALING_MAX_FREQ_ON_AC=0 #CPU_SCALING_MIN_FREQ_ON_BAT=0 @@ -2844,6 +1236,7 @@ MAX_LOST_WORK_SECS_ON_BAT=60 # performance, balance_performance, default, balance_power, power # Values are given in order of increasing power saving. # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required. +# Default: CPU_HWP_ON_AC=balance_performance CPU_HWP_ON_BAT=balance_power @@ -2851,6 +1244,7 @@ CPU_HWP_ON_BAT=balance_power # Limit the max/min P-state to control the power dissipation of the CPU. # Values are stated as a percentage of the available performance. # Requires an Intel Core i processor with intel_pstate driver. +# Default: #CPU_MIN_PERF_ON_AC=0 #CPU_MAX_PERF_ON_AC=100 #CPU_MIN_PERF_ON_BAT=0 @@ -2861,39 +1255,47 @@ CPU_HWP_ON_BAT=balance_power # Important: # - This may conflict with your distribution's governor settings # - A value of 1 does *not* activate boosting, it just allows it +# Default: #CPU_BOOST_ON_AC=1 #CPU_BOOST_ON_BAT=0 # Minimize number of used CPU cores/hyper-threads under light load conditions: # 0=disable, 1=enable. +# Default: SCHED_POWERSAVE_ON_AC=0 SCHED_POWERSAVE_ON_BAT=1 # Kernel NMI Watchdog: # 0=disable (default, saves power), 1=enable (for kernel debugging only). +# Default: NMI_WATCHDOG=0 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required. # Frequency voltage pairs are written to: # /sys/devices/system/cpu/cpu0/cpufreq/phc_controls # CAUTION: only use this, if you thoroughly understand what you are doing! +# Default: . #PHC_CONTROLS="F:V F:V F:V F:V" # Set CPU performance versus energy savings policy: # performance, balance-performance, default, balance-power, power. # Values are given in order of increasing power saving. # Requires kernel module msr and x86_energy_perf_policy from linux-tools. +# Default: ENERGY_PERF_POLICY_ON_AC=performance ENERGY_PERF_POLICY_ON_BAT=balance-power -# Disk devices; separate multiple devices with spaces (default: sda). +# Disk devices; separate multiple devices with spaces. # Devices can be specified by disk ID also (lookup with: tlp diskid). +# Note: DISK parameters below are effective only when this option is configured. +# Default: "nvme0n1 sda" DISK_DEVICES="sda sdb" # Disk advanced power management level: 1..254, 255 (max saving, min, off). # Levels 1..127 may spin down the disk; 255 allowable on most drives. # Separate values for multiple disks with spaces. Use the special value 'keep' # to keep the hardware default for the particular disk. +# Default: DISK_APM_LEVEL_ON_AC="254 254" DISK_APM_LEVEL_ON_BAT="128 128" @@ -2904,179 +1306,249 @@ DISK_APM_LEVEL_ON_BAT="128 128" # See 'man hdparm' for details. # Separate values for multiple disks with spaces. Use the special value 'keep' # to keep the hardware default for the particular disk. +# Default: #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0" #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0" -# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq). +# Select I/O scheduler for the disk devices. +# Multi queue (blk-mq) schedulers: +# mq-deadline(*), none, kyber, bfq +# Single queue schedulers: +# deadline(*), cfq, bfq, noop +# (*) recommended. # Separate values for multiple disks with spaces. Use the special value 'keep' # to keep the kernel default scheduler for the particular disk. -#DISK_IOSCHED="cfq cfq" +# Notes: +# - Multi queue (blk-mq) may need kernel boot option 'scsi_mod.use_blk_mq=1' +# and 'modprobe mq-deadline-iosched|kyber|bfq' on kernels < 5.0 +# - Single queue schedulers are legacy now and were removed together with +# the old block layer in kernel 5.0 +# Default: keep +#DISK_IOSCHED="mq-deadline mq-deadline" # AHCI link power management (ALPM) for disk devices: # min_power, med_power_with_dipm(*), medium_power, max_performance. # (*) Kernel >= 4.15 required, then recommended. # Multiple values separated with spaces are tried sequentially until success. +# Default: SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance" SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power" # Exclude host devices from AHCI link power management. # Separate multiple hosts with spaces. +# Default: #SATA_LINKPWR_BLACKLIST="host1" # Runtime Power Management for AHCI host and disks devices: # on=disable, auto=enable. -# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss. +# EXPERIMENTAL ** WARNING: auto may cause system lockups/data loss. +# Default: #AHCI_RUNTIME_PM_ON_AC=on #AHCI_RUNTIME_PM_ON_BAT=on # Seconds of inactivity before disk is suspended. +# Note: effective only when AHCI_RUNTIME_PM_ON_AC/BAT is activated. +# Default: 15 AHCI_RUNTIME_PM_TIMEOUT=15 # PCI Express Active State Power Management (PCIe ASPM): -# default, performance, powersave. -PCIE_ASPM_ON_AC=performance -PCIE_ASPM_ON_BAT=powersave +# default(*), performance, powersave. +# (*) keeps BIOS ASPM defaults (recommended) +# Default: +#PCIE_ASPM_ON_AC=default +#PCIE_ASPM_ON_BAT=default + +# Set the min/max/turbo frequency for the Intel GPU. +# Possible values depend on your hardware. For available frequencies see +# the output of tlp-stat -g. +# Default: +#INTEL_GPU_MIN_FREQ_ON_AC=0 +#INTEL_GPU_MIN_FREQ_ON_BAT=0 +#INTEL_GPU_MAX_FREQ_ON_AC=0 +#INTEL_GPU_MAX_FREQ_ON_BAT=0 +#INTEL_GPU_BOOST_FREQ_ON_AC=0 +#INTEL_GPU_BOOST_FREQ_ON_BAT=0 # Radeon graphics clock speed (profile method): low, mid, high, auto, default; -# auto = mid on BAT, high on AC; default = use hardware defaults. -RADEON_POWER_PROFILE_ON_AC=high -RADEON_POWER_PROFILE_ON_BAT=low +# auto = mid on BAT, high on AC. +# Default: default +RADEON_POWER_PROFILE_ON_AC=default +RADEON_POWER_PROFILE_ON_BAT=default # Radeon dynamic power management method (DPM): battery, performance. +# Default: RADEON_DPM_STATE_ON_AC=performance RADEON_DPM_STATE_ON_BAT=battery # Radeon DPM performance level: auto, low, high; auto is recommended. +# Note: effective only when RADEON_DPM_STATE_ON_AC/BAT is activated. +# Default: auto RADEON_DPM_PERF_LEVEL_ON_AC=auto RADEON_DPM_PERF_LEVEL_ON_BAT=auto # WiFi power saving mode: on=enable, off=disable; not supported by all adapters. +# Default: WIFI_PWR_ON_AC=off WIFI_PWR_ON_BAT=on # Disable wake on LAN: Y/N. +# Default: N WOL_DISABLE=Y # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs). # A value of 0 disables, >=1 enables power saving (recommended: 1). +# Default: SOUND_POWER_SAVE_ON_AC=0 SOUND_POWER_SAVE_ON_BAT=0 # Disable controller too (HDA only): Y/N. +# Note: effective only when SOUND_POWER_SAVE_ON_AC/BAT is activated. +# Default: Y SOUND_POWER_SAVE_CONTROLLER=N # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable. # Drive can be powered on again by releasing (and reinserting) the eject lever # or by pressing the disc eject button on newer models. # Note: an UltraBay/MediaBay hard disk is never powered off. +# Default: 0 BAY_POWEROFF_ON_AC=0 BAY_POWEROFF_ON_BAT=0 -# Optical drive device to power off (default sr0). +# Optical drive device to power off +# Default: sr0 BAY_DEVICE="sr0" # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable. +# Default: RUNTIME_PM_ON_AC=on RUNTIME_PM_ON_BAT=auto # Exclude PCI(e) device adresses the following list from Runtime PM # (separate with spaces). Use lspci to get the adresses (1st column). +# Default: #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6" # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM. # Default when unconfigured is "amdgpu nouveau nvidia radeon" which # prevents accidential power-on of dGPU in hybrid graphics setups. -# Use "" to disable the feature completely. # Separate multiple drivers with spaces. -#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon" +# Default: "amdgpu mei_me nouveau nvidia pcieport radeon", use "" to disable +# completely. +#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu mei_me nouveau nvidia pcieport radeon" # Set to 0 to disable, 1 to enable USB autosuspend feature. +# Default: 0 USB_AUTOSUSPEND=1 # Exclude listed devices from USB autosuspend (separate with spaces). # Use lsusb to get the ids. # Note: input devices (usbhid) are excluded automatically +# Default: #USB_BLACKLIST="1111:2222 3333:4444" # Bluetooth devices are excluded from USB autosuspend: # 0=do not exclude, 1=exclude. +# Default: 0 USB_BLACKLIST_BTUSB=0 # Phone devices are excluded from USB autosuspend: # 0=do not exclude, 1=exclude (enable charging). +# Default: 0 USB_BLACKLIST_PHONE=0 # Printers are excluded from USB autosuspend: # 0=do not exclude, 1=exclude. +# Default: 1 USB_BLACKLIST_PRINTER=1 # WWAN devices are excluded from USB autosuspend: # 0=do not exclude, 1=exclude. -USB_BLACKLIST_WWAN=1 +# Default: 0 +USB_BLACKLIST_WWAN=0 # Include listed devices into USB autosuspend even if already excluded -# by the blacklists above (separate with spaces). -# Use lsusb to get the ids. +# by the blacklists above (separate with spaces). Use lsusb to get the ids. +# Default: #USB_WHITELIST="1111:2222 3333:4444" # Set to 1 to disable autosuspend before shutdown, 0 to do nothing # (workaround for USB devices that cause shutdown problems). +# Default: 0 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown # on system startup: 0=disable, 1=enable. -# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below -# are ignored when this is enabled! +# Note: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below +# are ignored when this is enabled. +# Default: 0 #RESTORE_DEVICE_STATE_ON_STARTUP=0 -RESTORE_DEVICE_STATE_ON_STARTUP=0 +RESTORE_DEVICE_STATE_ON_STARTUP=1 # Radio devices to disable on startup: bluetooth, wifi, wwan. # Separate multiple devices with spaces. +# Default: #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan" -DEVICES_TO_DISABLE_ON_STARTUP="bluetooth" # Radio devices to enable on startup: bluetooth, wifi, wwan. # Separate multiple devices with spaces. +# Default: #DEVICES_TO_ENABLE_ON_STARTUP="wifi" # Radio devices to disable on shutdown: bluetooth, wifi, wwan. # (workaround for devices that are blocking shutdown). +# Default: #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan" # Radio devices to enable on shutdown: bluetooth, wifi, wwan. # (to prevent other operating systems from missing radios). +# Default: #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan" # Radio devices to enable on AC: bluetooth, wifi, wwan. +# Default: #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan" # Radio devices to disable on battery: bluetooth, wifi, wwan. +# Default: #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan" +DEVICES_TO_DISABLE_ON_BAT="bluetooth" # Radio devices to disable on battery when not in use (not connected): # bluetooth, wifi, wwan. +# Default: #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan" # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module # required). Charging starts when the remaining capacity falls below the # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value. # Main / Internal battery (values in %) +# Default: #START_CHARGE_THRESH_BAT0=75 #STOP_CHARGE_THRESH_BAT0=80 # Ultrabay / Slice / Replaceable battery (values in %) +# Default: #START_CHARGE_THRESH_BAT1=75 #STOP_CHARGE_THRESH_BAT1=80 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable. +# Default: 0 #RESTORE_THRESHOLDS_ON_BAT=1 +# Battery feature drivers: 0=disable, 1=enable +# Default: 1 (all) +NATACPI_ENABLE=1 +TPACPI_ENABLE=1 +TPSMAPI_ENABLE=1 + # ------------------------------------------------------------------------------ # tlp-rdw - Parameters for the radio device wizard # Possible devices: bluetooth, wifi, wwan. -# Hints: +# Notes: # - Parameters are disabled by default, remove the leading # to enable them # - Separate multiple radio devices with spaces +# Default: (for all parameters below) + # Radio devices to disable on connect. #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan" #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan" @@ -3409,1214 +1881,3 @@ RESTORE_DEVICE_STATE_ON_STARTUP=1 #DEVICES_TO_DISABLE_ON_UNDOCK="" #+end_src -** X - -*** xprofile -:PROPERTIES: -:header-args+: :tangle ~/.xprofile -:END: - -=~/.xprofile= is similar in style to =~/.xinitrc=, but on the -contrary, it's automatically sourced by LightDM, my display manager of -choice. - -#+begin_src sh :tangle no -xset -b # disable bell -xset r rate 200 45 # repeat delay (ms) and rate (repeats/sec) - -# setxkbmap -option compose:ralt - -setxkbmap -option ctrl:nocaps # turn capslock into control -setxkbmap -option altwin:swap_alt_win # swap alt and super - -if [ $(hostname) = "plasma" ] -then - setxkbmap -option ctrl:rctrl_ralt # turn right control into right alt -fi - -if [ $(hostname) = "enigma" ] -then - xmodmap -e "keycode 135 = Alt_R" # remap menu key to alt -fi - -light -Scrs "intel_backlight" 2 - -source $HOME/.zprofile - -export _JAVA_AWT_WM_NONREPARENTING=1 -export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true' - -if [ $(hostname) = "plasma" ] -then - unlock-def-gk.py & -fi - -bspwm & -#+end_src - -*** X resources - -**** Xresources -:PROPERTIES: -:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources") -:END: - -#+begin_src conf-xdefaults -#include ".Xresources.d/fonts" -! #include ".Xresources.d/colors" -#include ".Xresources.d/emacs" -#include ".Xresources.d/rxvt-unicode" -#+end_src - -**** Xresources.d - -***** fonts -:PROPERTIES: -:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts") -:END: - -#+begin_src conf-xdefaults -Xft.lcdfilter: lcddefault -Xft.antialias: true -Xft.autohint: 0 -Xft.hinting: true -Xft.hintstyle: hintslight -! Xft.hintstyle: hintfull -Xft.rgba: rgb -Xft.dpi: 96 -#+end_src - -***** colors -:PROPERTIES: -:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors") -:END: - -#+begin_src conf-xdefaults :tangle no -#include "gruvbox-light.xresources" -! #include "gruvbox-dark.xresources" -#include "gruvbox-urxvt256.xresources" -#+end_src - -#+begin_src conf-xdefaults :tangle no -! ----------------------------------------------------------------------------- -! File: gruvbox-light.xresources -! Description: Retro groove colorscheme generalized -! Author: morhetz -! Source: https://github.com/morhetz/gruvbox-generalized -! Last Modified: 6 Sep 2014 -! ----------------------------------------------------------------------------- - -! hard contrast: *background: #f9f5d7 -*background: #fbf1c7 -! soft contrast: *background: #f2e5bc -*foreground: #3c3836 -! Black + DarkGrey -*color0: #fdf4c1 -*color8: #928374 -! DarkRed + Red -*color1: #cc241d -*color9: #9d0006 -! DarkGreen + Green -*color2: #98971a -*color10: #79740e -! DarkYellow + Yellow -*color3: #d79921 -*color11: #b57614 -! DarkBlue + Blue -*color4: #458588 -*color12: #076678 -! DarkMagenta + Magenta -*color5: #b16286 -*color13: #8f3f71 -! DarkCyan + Cyan -*color6: #689d6a -*color14: #427b58 -! LightGrey + White -*color7: #7c6f64 -*color15: #3c3836 -#+end_src - -#+begin_src conf-xdefaults :tangle no -! ----------------------------------------------------------------------------- -! File: gruvbox-dark.xresources -! Description: Retro groove colorscheme generalized -! Author: morhetz -! Source: https://github.com/morhetz/gruvbox-generalized -! Last Modified: 6 Sep 2014 -! ----------------------------------------------------------------------------- - -! hard contrast: *background: #1d2021 -*background: #282828 -! soft contrast: *background: #32302f -*foreground: #ebdbb2 -! Black + DarkGrey -*color0: #282828 -*color8: #928374 -! DarkRed + Red -*color1: #cc241d -*color9: #fb4934 -! DarkGreen + Green -*color2: #98971a -*color10: #b8bb26 -! DarkYellow + Yellow -*color3: #d79921 -*color11: #fabd2f -! DarkBlue + Blue -*color4: #458588 -*color12: #83a598 -! DarkMagenta + Magenta -*color5: #b16286 -*color13: #d3869b -! DarkCyan + Cyan -*color6: #689d6a -*color14: #8ec07c -! LightGrey + White -*color7: #a89984 -*color15: #ebdbb2 -#+end_src - -#+begin_src conf-xdefaults :tangle no -! ----------------------------------------------------------------------------- -! File: gruvbox-urxvt256.xresources -! Description: Retro groove colorscheme generalized -! Author: morhetz -! Source: https://github.com/morhetz/gruvbox-generalized -! Last Modified: 13 Dec 2013 -! ----------------------------------------------------------------------------- - -URxvt.color24: #076678 -URxvt.color66: #427b58 -URxvt.color88: #9d0006 -URxvt.color96: #8f3f71 -URxvt.color100: #79740e -URxvt.color108: #8ec07c -URxvt.color109: #83a598 -URxvt.color130: #af3a03 -URxvt.color136: #b57614 -URxvt.color142: #b8bb26 -URxvt.color167: #fb4934 -URxvt.color175: #d3869b -URxvt.color208: #fe8019 -URxvt.color214: #fabd2f -URxvt.color223: #ebdbb2 -URxvt.color228: #f2e5bc -URxvt.color229: #fbf1c7 -URxvt.color230: #f9f5d7 -URxvt.color234: #1d2021 -URxvt.color235: #282828 -URxvt.color236: #32302f -URxvt.color237: #3c3836 -URxvt.color239: #504945 -URxvt.color241: #665c54 -URxvt.color243: #7c6f64 -URxvt.color244: #928374 -URxvt.color245: #928374 -URxvt.color246: #a89984 -URxvt.color248: #bdae93 -URxvt.color250: #d5c4a1 -#+end_src - -***** emacs -:PROPERTIES: -:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs") -:END: - -#+begin_src conf-xdefaults -Emacs.menuBar: off -Emacs.toolBar: off -Emacs.verticalScrollBars: off -Emacs.cursorBlink: off -Emacs.FontBackend: xft,x -! Emacs.font: Ubuntu Mono-12 -! Emacs.font: Triplicate T4C-11 -! Emacs.font: Ubuntu Mono-10.5 -! Emacs.font: Ubuntu Mono-12 -! Emacs.font: Iosevka-11 - -! Emacs.font: Fira Mono:size=15 -! Emacs.font: DejaVu Sans Mono:size=15 -! Emacs.font: Inconsolata:size=17 -! Emacs.font: Inconsolata:size=16 -! Emacs.font: Inconsolata LGC:size=14 -! Emacs.font: Source Code Pro Medium-10.5 -Emacs.font: Source Code Pro:size=14 -! Emacs.font: Ubuntu Mono:size=16 -! Emacs.font: Iosevka:size=16 -#+end_src - -***** rxvt-unicode -:PROPERTIES: -:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode") -:END: - -#+begin_src conf-xdefaults -! Font -URxvt.font: xft:source code pro:pixelsize=14:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true -URxvt.boldFont: xft:source code pro:semibold:pixelsize=14:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold -URxvt.italicFont: xft:source code pro:italic:pixelsize=14:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic -URxvt.bolditalicFont: xft:source code pro:semibold:italic:pixelsize=14:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic - -URxvt.xftAntialias: true -URxvt.letterSpace: 0 - -URxvt.depth: 0 -URxvt.loginShell: true -URxvt.saveLines: 100000 -URxvt.internalBorder: 3 -URxvt.lineSpace: 0 -URxvt.scrollBar: false -URxvt.scrollStyle: rxvt -URxvt*scrollTtyOutput: false -URxvt*scrollWithBuffer: true -URxvt*scrollTtyKeypress: true -URxvt.keysym.Shift-Up: command:\033]720;1\007 -URxvt.keysym.Shift-Down: command:\033]721;1\007 - -URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select -URxvt.url-select.launcher: firefox -URxvt.url-select.underline: true -URxvt.keysym.M-u: perl:url-select:select_next -URxvt.keysym.M-Escape: perl:keyboard-select:activate -URxvt.keysym.M-s: perl:keyboard-select:search -URxvt.url-launcher: /usr/bin/firefox -URxvt.matcher.button: 1 -URxvt.iso14755: false -URxvt.iso14755_53: false -URxvt.keysym.M-c: perl:clipboard:copy -URxvt.keysym.M-v: perl:clipboard:paste -URxvt.keysym.C-A-V: perl:clipboard:paste_escaped -URxvt.keysym.C-Up: font-size:increase -URxvt.keysym.C-Down: font-size:decrease -URxvt.keysym.C-S-Up: font-size:incglobal -URxvt.keysym.C-S-Down: font-size:decglobal -URxvt.keysym.C-equal: font-size:reset -!URxvt.keysym.C-question: font-size:show - -URxvt.iconFile: /usr/share/icons/Paper/48x48/apps/utilities-terminal.png - -!urxvt*foreground: white -!urxvt*background: black - -!*color0: #2E3436 -!*color1: #a40000 -!*color2: #4E9A06 -!*color3: #C4A000 -!*color4: #3465A4 -!*color5: #75507B -!*color6: #ce5c00 -!*color7: #babdb9 -!*color8: #555753 -!*color9: #EF2929 -!*color10: #8AE234 -!*color11: #FCE94F -!*color12: #729FCF -!*color13: #AD7FA8 -!*color14: #fcaf3e -!*color15: #EEEEEC - -!URxvt.foreground: #C8C8C8 -!URxvt.background: #FFFFFF - -!! black -!*color0: #2E3436 -!*color8: #555753 -!! red -!*color1: #a40000 -!*color9: #EF2929 -!! green -!*color2: #4E9A06 -!*color10: #8AE234 -!! yellow -!*color3: #C4A000 -!*color11: #FCE94F -!! blue -!*color4: #3465A4 -!*color12: #729FCF -!! purple -!*color5: #75507B -!*color13: #AD7FA8 -!! orange (replaces cyan) -!*color6: #ce5c00 -!*color14: #fcaf3e -!! white -!*color7: #babdb9 -!*color15: #EEEEEC - -! Tango colour theme for rxvt-unicode -URxvt.background: #FFFFFF -URxvt.foreground: #000000 - -! Black -URxvt.color0: #2E3436 -URxvt.color8: #757773 - -! Red -URxvt.color1: #CC0000 -URxvt.color9: #EF2929 - -! Green -URxvt.color2: #4E9A06 -URxvt.color10: #8AE234 - -! Yellow -URxvt.color3: #C4A000 -URxvt.color11: #FCE94F - -! Blue -URxvt.color4: #3465A4 -URxvt.color12: #729FCF - -! Magenta -URxvt.color5: #75507B -URxvt.color13: #AD7FA8 - -!! Cyan -!URxvt.color6: #06989A -!URxvt.color14: #34E2E2 -! orange (replaces cyan) -,*color6: #ce5c00 -,*color14: #fcaf3e - -! White -URxvt.color7: #D3D7CF -URxvt.color15: #EEEEEC -#+end_src - -*** xkb us_ab keyboard layout - -#+begin_src conf :tangle "/sudo::/usr/share/X11/xkb/symbols/us_ab" :comments none -default partial alphanumeric_keys -xkb_symbols "us_ab" { - include "us(basic)" - name[Group1]= "English (US)(aminb)"; - - key { [ Alt_R ] }; -}; -#+end_src - -** XDG -:PROPERTIES: -:header-args+: :tangle ~/.config/user-dirs.dirs -:END: - -#+begin_src conf -XDG_DESKTOP_DIR="$HOME/Desktop" -XDG_DOCUMENTS_DIR="$HOME/usr/docs" -XDG_DOWNLOAD_DIR="$HOME/usr/dls" -XDG_MUSIC_DIR="$HOME/usr/music" -XDG_PICTURES_DIR="$HOME/usr/pics" -XDG_PUBLICSHARE_DIR="$HOME/usr/Public" -XDG_TEMPLATES_DIR="$HOME/usr/Templates" -XDG_VIDEOS_DIR="$HOME/usr/vids" -#+end_src - -** Zathura -:PROPERTIES: -:header-args+: :tangle ~/.config/zathura/zathurarc -:END: - -#+begin_src conf -set smooth-scroll true -set selection-clipboard clipboard -set zoom-step 05 -set default-bg "#272727" -set statusbar-bg "#272727" -set inputbar-bg "#373737" -#+end_src - -** Zsh - -My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]], -[[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them -installed. - -*** zimrc -:PROPERTIES: -:header-args+: :tangle ~/.zimrc -:END: - -#+begin_src sh - - -################# -# CORE SETTINGS # -################# - -# -# Zim settings -# - -# Select what modules you would like enabled. -# The second line of modules may depend on options set by modules in the first -# line. These dependencies are noted on the respective module's README.md. -zmodules=(directory environment git git-info history input ssh utility custom \ - syntax-highlighting history-substring-search prompt completion) - - -################### -# MODULE SETTINGS # -################### - -# -# Prompt -# - -# Set your desired prompt here -zprompt_theme='pure' -#PURE_PROMPT_SYMBOL=λ -#PURE_PROMPT_SYMBOL=δ -PURE_PROMPT_SYMBOL=➜ - -# -# Completion -# - -# set an optional host-specific filename for the completion cache file -# if none is provided, the default '.zcompdump' is used. -#zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}" - -# -# Utility -# - -# Uncomment to enable command correction prompts -# See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput -setopt CORRECT - -# -# Environment -# - -# Set the string below to the desired terminal title format string. -# The terminal title is redrawn upon directory change, however, variables like -# ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data: -# http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes -# The example below uses the following format: 'username@host:/current/directory' -ztermtitle='%n@%m:%~' - -# -# Input -# - -# Uncomment to enable double-dot expansion. -# This appends '../' to your input for each '.' you type after an initial '..' -#zdouble_dot_expand='true' - -# -# Syntax-Highlighting -# - -# This determines what highlighters will be used with the syntax-highlighting module. -# Documentation of the highlighters can be found here: -# https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md -# For (u)rxvt, termite and gnome-terminal users, -# removing the 'cursor' highlighter will fix the disappearing cursor problem -#zhighlighters=(main brackets cursor) -zhighlighters=(main brackets pattern) - - -# -# SSH -# - -# Load these ssh identities with the ssh module -zssh_ids=(id_ed25519_bandali) - - -# -# Pacman -# - -# Set (optional) pacman front-end. -zpacman_frontend='yay' - -# Load any helper scripts as defined here -#zpacman_helper=(aur) -#+end_src - -*** zlogin -:PROPERTIES: -:header-args+: :tangle ~/.zlogin -:END: - -#+begin_src sh - - -# -# User configuration sourced by login shells -# - -# Initialize zim -[[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh -#+end_src - -*** zprofile -:PROPERTIES: -:header-args+: :tangle ~/.zprofile -:END: - -#+begin_src sh -#PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH" -#PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH -export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH -export XDG_CONFIG_HOME=$HOME/.config -export XDG_DATA_HOME=$HOME/.local/share -export XDG_DATA_DIRS=/usr/local/share:/usr/share -export MAILDIR="$HOME/mail" -export CVS_RSH=ssh -#export MATHMODELS=$HOME/src/eiffel/mathmodels -#export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src -#export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/ - -# Eiffel2Java stuff -#export JAVA_HOME=/usr/lib/jvm/default -#export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux" -#export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server" -#export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server" - -#export PATH="$HOME/usr/build/pvs:$PATH" -#export SBCLISP_HOME=/usr/share/sbcl-source -#export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib" - -export MOZ_USE_XINPUT2=1 # precise scrolling in firefox - -#export JAVA_HOME=/usr/lib/jvm/java-8-openjdk -#export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G" - -export NIXPKGS=$HOME/src/git/nixpkgs - -if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer - -export GUIX_LOCPATH="$HOME/.guix-profile/lib/locale" -export PATH="/$HOME/.config/guix/current/bin${PATH:+:}$PATH" -export SSL_CERT_DIR="$HOME/.guix-profile/etc/ssl/certs" -export SSL_CERT_FILE="$HOME/.guix-profile/etc/ssl/certs/ca-certificates.crt" -export GIT_SSL_CAINFO="$SSL_CERT_FILE" -#+end_src - -*** zshenv -:PROPERTIES: -:header-args+: :tangle ~/.zshenv -:END: - -#+begin_src sh -# Ensure that a non-login, non-interactive shell has a defined environment. -if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then - source "${ZDOTDIR:-$HOME}/.zprofile" -fi -#+end_src - -*** zshrc -:PROPERTIES: -:header-args+: :tangle ~/.zshrc -:END: - -#+begin_src sh -# Bash-like navigation -#export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>' -#export WORDCHARS='*?-[]~=&;!#$%^(){}<>' -export WORDCHARS='*?[]~=&;!#$%^(){}<>' -#ZLE_SPACE_SUFFIX_CHARS=$'|&' - -#disable -r time # disable shell reserved word -#alias time='time -p' # -p for POSIX output - -# rehash if last command was pacaur or pacman -# (so that zsh picks up changes in $PATH immediately) -TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh } - -# -# User configuration sourced by interactive shells -# - -# Change default zim location -export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim - -# Start zim -[[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh - -ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red') -#ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold' - -setopt globdots - -source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh -# source ~/.zsh/zsh-autopair/autopair.zsh - - -### fzf ### - -source /usr/share/fzf/key-bindings.zsh -source /usr/share/fzf/completion.zsh - -# Accept history selection instead of putting it on -# the command line -fzf-history-widget-accept() { - fzf-history-widget - zle accept-line -} -#zle -N fzf-history-widget-accept -#bindkey '^R' fzf-history-widget-accept - -# alt+c preview -export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'" - -### fzf ### - - -# aliases -alias mpv="mpv --ytdl-format mp4" -alias mv="mv -iv" -alias cp="cp -iv" -alias scl=systemctl -alias jcl=journalctl -alias m="mbsync uwaterloo; mbsync amin" -alias best="youtube-dl -f best" -alias sd="ssh deb" -alias sf="ssh fp" -alias sn="ssh nix" - -aur() { - cd ~/usr/build - git clone https://aur.archlinux.org/${1}.git - cd ${1} -} - -# i-beam cursor -echo -e "\033[5 q" -#echo -e "\033[6 q" -#+end_src - -* Scripts - -This section contains various useful scripts and the ones used by the -programs above. For instance, =toggle-tablet= for switching to and -from tablet mode on my X220T, =toggle-presentation-mode= for toggling -Xfce's presentation mode which keeps the screen awake, and -=rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an -exact brightness value. - -** battery-percentage-time -:PROPERTIES: -:header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/sh" -:END: - -#+begin_src sh :tangle no -dbus_send() { - label=$1 - dbus-send --print-reply=literal --system \ - --dest=org.freedesktop.UPower \ - /org/freedesktop/UPower/devices/battery_BAT0 \ - org.freedesktop.DBus.Properties.Get \ - string:org.freedesktop.UPower.Device \ - string:"${label}" | awk '{print $3}' -} - -perc=$(dbus_send 'Percentage') -state=$(dbus_send 'State') - -if [ "$state" -eq 2 ]; then # Discharging - secs=$(dbus_send 'TimeToEmpty') -elif [ "$state" -eq 1 ]; then # Charging - secs=$(dbus_send 'TimeToFull') -fi - -printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60)) -#+end_src - -** my-i3status.py -:PROPERTIES: -:header-args+: :tangle ~/.local/bin/my-i3status.py :shebang "#!/usr/bin/env python2" -:END: - -#+begin_src python :comments none -# -*- coding: utf-8 -*- - -# This script is a simple wrapper which prefixes each i3status line with custom -# information. It is based on: -# https://github.com/i3/i3status/blob/master/contrib/wrapper.py -# -# In ~/.i3status.conf, add the following line: -# output_format = "i3bar" -# in the 'general' section. -# Then, in ~/.config/i3/config or ~/.config/sway/config add: -# status_command i3status | my-i3status.py -# in the 'bar' section. Make sure my-i3status.py is in $PATH. -# -# © 2012 Valentin Haenel -# © 2018 Amin Bandali -# -# This program is free software. It comes without any warranty, to the extent -# permitted by applicable law. You can redistribute it and/or modify it under -# the terms of the Do What The Fuck You Want To Public License (WTFPL), Version -# 2, as published by Sam Hocevar. See http://sam.zoy.org/wtfpl/COPYING for more -# details. - -import sys -import json -import os - -def get_nosleep(): - """ Return true if ~/.nosleep exists. """ - return os.path.isfile(os.path.expanduser("~/.nosleep")) - -def print_line(message): - """ Non-buffered printing to stdout. """ - sys.stdout.write(message + '\n') - sys.stdout.flush() - -def read_line(): - """ Interrupted respecting reader for stdin. """ - # try reading a line, removing any extra whitespace - try: - line = sys.stdin.readline().strip() - # i3status sends EOF, or an empty line - if not line: - sys.exit(3) - return line - # exit on ctrl-c - except KeyboardInterrupt: - sys.exit() - -if __name__ == '__main__': - # Skip the first line which contains the version header. - print_line(read_line()) - - # The second line contains the start of the infinite array. - print_line(read_line()) - - while True: - line, prefix = read_line(), '' - # ignore comma at start of lines - if line.startswith(','): - line, prefix = line[1:], ',' - - if get_nosleep(): - j = json.loads(line) - # insert information into the start of the json, but could be anywhere - j.insert(0, {'full_text' : '🖵 ', 'name' : 'nosleep'}) - # and echo back new encoded json - print_line(prefix+json.dumps(j)) - else: - print_line(prefix+line) -#+end_src - -** rofi-light -:PROPERTIES: -:header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash" -:END: - -#+begin_src bash -cur=$(light -G) -val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 12) -[ -n "$val" ] && light -S $val -#+end_src - -** rofi-remmina.py -:PROPERTIES: -:header-args+: :tangle ~/.local/bin/rofi-remmina.py :shebang "#!/usr/bin/env python2" -:END: - -#+begin_src python -import ConfigParser -import os -from subprocess import Popen, PIPE - -remmina_dir = os.path.expanduser("~/.local/share/remmina") - -fdict = dict() - -for f in os.listdir(remmina_dir): - fp = os.path.join(remmina_dir, f) - c = ConfigParser.ConfigParser() - c.read(fp) - n = c.get('remmina', 'name') - fdict[n] = fp - -lines = max(min(15, len(fdict)), 1); -width = len(max(fdict.keys(), key=len)) -rofi = Popen(["rofi", "-i", "-dmenu", \ - "-l", str(lines), "-width", str(width), \ - "-p", "connection"], stdout=PIPE, stdin=PIPE) -selected = rofi.communicate("\n" \ - .join(fdict.keys()) \ - .encode("utf-8"))[0] \ - .decode("utf-8") \ - .strip() -rofi.wait() - -r = Popen(["remmina", "-c", fdict[selected]]) -r.wait() -#+end_src - -** s (run sway) -:PROPERTIES: -:header-args+: :tangle ~/.local/bin/s :shebang "#!/bin/bash" -:END: - -#+begin_src bash -export _JAVA_AWT_WM_NONREPARENTING=1 -export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true' -light -Nr 2 -source $HOME/.zprofile -sway -#+end_src - -** sway-ws-util -:PROPERTIES: -:header-args+: :tangle ~/.local/bin/sway-ws-util :shebang "#!/bin/bash" -:END: - -#+begin_src bash -curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name') -[[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1)) -[[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1)) -dest_ws=-1 -op=-1 - -if [ "$1" = "switch" ] || [ "$1" = "move" ]; then - op="$1" - if [ "$2" = "prev" ]; then - dest_ws="$prev_ws" - elif [ "$2" = "next" ]; then - dest_ws="$next_ws" - else - echo "Usage: $0 $1 {prev|next} [follow]" - exit 1 - fi -else - echo "Usage: $0 {switch|move} {prev|next} [follow]" - exit 1 -fi - -if [ "$op" = "switch" ]; then - sway workspace "$dest_ws" -elif [ "$op" = "move" ]; then - sway move container to workspace "$dest_ws" - if [ "$3" = "follow" ]; then - sway workspace "$dest_ws" - fi -fi -#+end_src - -** toggle-layout -:PROPERTIES: -:header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash" -:END: - -#+begin_src bash :tangle no -lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)" - -if [ "$lang" = "us" ]; then - setxkbmap ir -else - setxkbmap us - # xmodmap $HOME/.Xmodmap -fi -#+end_src - -** toggle-presentation-mode -:PROPERTIES: -:header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash" -:END: - -#+begin_src bash :tangle no -xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T -#+end_src - -** toggle-tablet -:PROPERTIES: -:header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash" -:END: - -This script toggles between a 'normal' mode and a 'tablet' mode, doing -a few things: - -- rotates the screen using =xrandr=, so that rotating the physical - display of my X220t would have the laptop's battery on the right - hand side, -- enables touch screen, -- properly rotates the stylus pen and touch screen pointers, and -- toggles between RGB and Vertical BGR sub-pixel order. - -#+begin_src bash :tangle no -case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in - 0) # Screen is not rotated, we should rotate it right (90°) - xrandr -o 3 - xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1 - xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1 - xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1 - xfconf-query -c xsettings -p /Xft/RGBA -s vbgr - ;; - 1) # Currently top is rotated right, we should set it normal (0°) - xrandr -o 0 - xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0 - xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0 - xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0 - xfconf-query -c xsettings -p /Xft/RGBA -s rgb - ;; - *) - echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2 - exit 1 - ;; -esac -#+end_src - -** unlock-def-gk.py -:PROPERTIES: -:header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2" -:END: - -#+begin_src python :tangle no -import gnomekeyring as gk -# list_item_ids_sync('login')[0] == 1L -gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret()) -#+end_src - -** volume-info -:PROPERTIES: -:header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh" -:END: - -#+begin_src sh :tangle no -cur_vol=$(pamixer --get-volume) - -if [ $(pamixer --get-mute) = true ]; then - printf 'mt \n' "$cur_vol" -else - printf '%02d \n' "$cur_vol" -fi -#+end_src - -** wp - -My little wallpaper changer script. - -*** wp -:PROPERTIES: -:header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash" -:END: - -#+begin_src bash :tangle no -export DISPLAY=:0 - -case "$1" in - "day") - feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg - ;; - "night") - feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg - ;; - *) - echo $"Usage: $0 {day|night}" - exit 1 -esac -#+end_src - -*** wp-auto -:PROPERTIES: -:header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash" -:END: - -#+begin_src bash :tangle no -SED=$(which sed) -ROFI=$(which rofi) - -export DISPLAY=:0 -HOUR=$(date +%H) - -if [ -z "${SED}" ] -then - echo "Did not find 'sed', script cannot continue." - exit 1 -fi -if [ -z "${ROFI}" ] -then - echo "Did not find rofi, there is no point to continue." - exit 1 -fi - -### -# Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end. -# Repeated calls should leave the config clean-ish -### -function set_theme() -{ - CDIR="${HOME}/.config/rofi/" - if [ ! -d "${CDIR}" ] - then - mkdir -p ${CDIR} - fi - if [ -f "${CDIR}/config" ] - then - ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config" - fi - echo "rofi.theme: ${1}" >> "${CDIR}/config" - -} - -if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ] - then - feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg - xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources - set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi" - else - feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg - xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources - set_theme "/usr/share/rofi/themes//gruvbox-light.rasi" -fi -#+end_src - -*** wp.service -:PROPERTIES: -:header-args+: :tangle ~/.config/systemd/user/wp.service -:END: - -#+begin_src conf :tangle no -[Unit] -Description=wallpaper service - -[Service] -Type=oneshot -ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto -#+end_src - -*** wp.timer -:PROPERTIES: -:header-args+: :tangle ~/.config/systemd/user/wp.timer -:END: - -#+begin_src conf :tangle no -[Unit] -[Unit] -Description=wallpaper timer - -[Timer] -OnCalendar=07,21:00 -Unit=wp.service -Persistent=true - -[Install] -WantedBy=timers.target -#+end_src - -** zathura-sync.sh -:PROPERTIES: -:header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh" -:END: - -#+begin_src sh -pos="$1" -pdffile="$2" -zathura --synctex-forward "$pos" "$pdffile" || \ - ( - zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" & - sleep 1; zathura --synctex-forward "$pos" "$pdffile" ) -#+end_src -** Fun :) - -*** eat-em -:PROPERTIES: -:header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh" -:END: - -#+begin_src sh -# Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921 -# [ESC] character in original post removed here. - -# ANSI Color -- use these variables to easily have different color -# and format output. Make sure to output the reset sequence after -# colors (f = foreground, b = background), and use the 'off' -# feature for anything you turn on. - -initializeANSI() -{ - esc="$(echo -en '\e')" - - blackf="${esc}[30m"; redf="${esc}[31m"; greenf="${esc}[32m" - yellowf="${esc}[33m" bluef="${esc}[34m"; purplef="${esc}[35m" - cyanf="${esc}[36m"; whitef="${esc}[37m" - - blackb="${esc}[40m"; redb="${esc}[41m"; greenb="${esc}[42m" - yellowb="${esc}[43m" blueb="${esc}[44m"; purpleb="${esc}[45m" - cyanb="${esc}[46m"; whiteb="${esc}[47m" - - boldon="${esc}[1m"; boldoff="${esc}[22m" - italicson="${esc}[3m"; italicsoff="${esc}[23m" - ulon="${esc}[4m"; uloff="${esc}[24m" - invon="${esc}[7m"; invoff="${esc}[27m" - - reset="${esc}[0m" -} - -# note in this first use that switching colors doesn't require a reset -# first - the new color overrides the old one. - -#clear - -initializeANSI - -cat << EOF - - ${yellowf} ▄███████▄${reset} ${redf} ▄██████▄${reset} ${greenf} ▄██████▄${reset} ${bluef} ▄██████▄${reset} ${purplef} ▄██████▄${reset} ${cyanf} ▄██████▄${reset} - ${yellowf}▄█████████▀▀${reset} ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset} ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset} ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset} ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset} ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset} - ${yellowf}███████▀${reset} ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset} ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset} ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset} ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset} ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset} - ${yellowf}███████▄${reset} ${redf}████████████${reset} ${greenf}████████████${reset} ${bluef}████████████${reset} ${purplef}████████████${reset} ${cyanf}████████████${reset} - ${yellowf}▀█████████▄▄${reset} ${redf}██▀██▀▀██▀██${reset} ${greenf}██▀██▀▀██▀██${reset} ${bluef}██▀██▀▀██▀██${reset} ${purplef}██▀██▀▀██▀██${reset} ${cyanf}██▀██▀▀██▀██${reset} - ${yellowf} ▀███████▀${reset} ${redf}▀ ▀ ▀ ▀${reset} ${greenf}▀ ▀ ▀ ▀${reset} ${bluef}▀ ▀ ▀ ▀${reset} ${purplef}▀ ▀ ▀ ▀${reset} ${cyanf}▀ ▀ ▀ ▀${reset} - - ${boldon}${yellowf} ▄███████▄ ${redf} ▄██████▄ ${greenf} ▄██████▄ ${bluef} ▄██████▄ ${purplef} ▄██████▄ ${cyanf} ▄██████▄${reset} - ${boldon}${yellowf}▄█████████▀▀ ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄ ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄ ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄ ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄ ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset} - ${boldon}${yellowf}███████▀ ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███ ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███ ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███ ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███ ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset} - ${boldon}${yellowf}███████▄ ${redf}████████████ ${greenf}████████████ ${bluef}████████████ ${purplef}████████████ ${cyanf}████████████${reset} - ${boldon}${yellowf}▀█████████▄▄ ${redf}██▀██▀▀██▀██ ${greenf}██▀██▀▀██▀██ ${bluef}██▀██▀▀██▀██ ${purplef}██▀██▀▀██▀██ ${cyanf}██▀██▀▀██▀██${reset} - ${boldon}${yellowf} ▀███████▀ ${redf}▀ ▀ ▀ ▀ ${greenf}▀ ▀ ▀ ▀ ${bluef}▀ ▀ ▀ ▀ ${purplef}▀ ▀ ▀ ▀ ${cyanf}▀ ▀ ▀ ▀${reset} - -EOF -#+end_src - -*** invade-em -:PROPERTIES: -:header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash" -:END: - -#+begin_src bash -# -# ANSI color scheme script featuring Space Invaders -# -# Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921 -# Modified by lolilolicon -# - -f=3 b=4 -for j in f b; do - for i in {0..7}; do - printf -v $j$i %b "\e[${!j}${i}m" - done -done -bld=$'\e[1m' -rst=$'\e[0m' - -cat << EOF - - $f1 ▀▄ ▄▀ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4 ▀▄ ▄▀ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst - $f1 ▄█▀███▀█▄ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4 ▄█▀███▀█▄ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst - $f1█▀███████▀█ $f2▀▀███▀▀███▀▀ $f3▀█▀██▀█▀ $f4█▀███████▀█ $f5▀▀███▀▀███▀▀ $f6▀█▀██▀█▀$rst - $f1▀ ▀▄▄ ▄▄▀ ▀ $f2 ▀█▄ ▀▀ ▄█▀ $f3▀▄ ▄▀ $f4▀ ▀▄▄ ▄▄▀ ▀ $f5 ▀█▄ ▀▀ ▄█▀ $f6▀▄ ▄▀$rst - - $bld$f1▄ ▀▄ ▄▀ ▄ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4▄ ▀▄ ▄▀ ▄ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst - $bld$f1█▄█▀███▀█▄█ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4█▄█▀███▀█▄█ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst - $bld$f1▀█████████▀ $f2▀▀▀██▀▀██▀▀▀ $f3▀▀█▀▀█▀▀ $f4▀█████████▀ $f5▀▀▀██▀▀██▀▀▀ $f6▀▀█▀▀█▀▀$rst - $bld$f1 ▄▀ ▀▄ $f2▄▄▀▀ ▀▀ ▀▀▄▄ $f3▄▀▄▀▀▄▀▄ $f4 ▄▀ ▀▄ $f5▄▄▀▀ ▀▀ ▀▀▄▄ $f6▄▀▄▀▀▄▀▄$rst - - - $f7▌$rst - - $f7▌$rst - - $f7 ▄█▄ $rst - $f7▄█████████▄$rst - $f7▀▀▀▀▀▀▀▀▀▀▀$rst - -EOF -#+end_src