X-Git-Url: https://git.shemshak.org/~bandali/configs/blobdiff_plain/9d455f77fec79b059ffd239692ff802134267f57..b43e02acedf252efd3618b564174efb83c4c6d4c:/spacemacs/.spacemacs?ds=inline diff --git a/spacemacs/.spacemacs b/spacemacs/.spacemacs deleted file mode 100644 index 2d927a2..0000000 --- a/spacemacs/.spacemacs +++ /dev/null @@ -1,221 +0,0 @@ -;; -*- mode: emacs-lisp -*- -;; This file is loaded by Spacemacs at startup. -;; It must be stored in your home directory. - -(defun dotspacemacs/layers () - "Configuration Layers declaration." - (setq-default - ;; List of additional paths where to look for configuration layers. - ;; Paths must have a trailing slash (ie. `~/.mycontribs/') - dotspacemacs-configuration-layer-path '() - ;; List of configuration layers to load. If it is the symbol `all' instead - ;; of a list then all discovered layers will be installed. - dotspacemacs-configuration-layers - '( - ;; ---------------------------------------------------------------- - ;; Example of useful layers you may want to use right away. - ;; Uncomment some layer names and press (Vim style) or - ;; (Emacs style) to install them. - ;; ---------------------------------------------------------------- - auto-completion - better-defaults - emacs-lisp - (git :variables - git-gutter-use-fringe t) - markdown - org - shell - syntax-checking - mu4e - notmuch - evil - c-c++ - auctex - ;; html - ;; clojure - ;; (haskell :variables '(haskell-enable-hindent-style "chris-done" - ;; haskell-enable-shm-support t)) - ;; rust - shell - ;; themes-megapack - ) - ;; List of additional packages that will be installed wihout being - ;; wrapped in a layer. If you need some configuration for these - ;; packages then consider to create a layer, you can also put the - ;; configuration in `dotspacemacs/config'. - dotspacemacs-additional-packages '() - ;; A list of packages and/or extensions that will not be install and loaded. - dotspacemacs-excluded-packages '() - ;; If non-nil spacemacs will delete any orphan packages, i.e. packages that - ;; are declared in a layer which is not a member of - ;; the list `dotspacemacs-configuration-layers' - dotspacemacs-delete-orphan-packages t)) - -(defun dotspacemacs/init () - "Initialization function. -This function is called at the very startup of Spacemacs initialization -before layers configuration." - ;; This setq-default sexp is an exhaustive list of all the supported - ;; spacemacs settings. - (setq-default - ;; Either `vim' or `emacs'. Evil is always enabled but if the variable - ;; is `emacs' then the `holy-mode' is enabled at startup. - dotspacemacs-editing-style 'vim - ;; If non nil output loading progress in `*Messages*' buffer. - dotspacemacs-verbose-loading nil - ;; Specify the startup banner. Default value is `official', it displays - ;; the official spacemacs logo. An integer value is the index of text - ;; banner, `random' chooses a random text banner in `core/banners' - ;; directory. A string value must be a path to an image format supported - ;; by your Emacs build. - ;; If the value is nil then no banner is displayed. - dotspacemacs-startup-banner 'official - ;; List of items to show in the startup buffer. If nil it is disabled. - ;; Possible values are: `recents' `bookmarks' `projects'." - dotspacemacs-startup-lists '(recents projects) - ;; List of themes, the first of the list is loaded when spacemacs starts. - ;; Press T n to cycle to the next theme in the list (works great - ;; with 2 themes variants, one dark and one light) - dotspacemacs-themes '(leuven - gotham - solarized-light - solarized-dark - spacemacs-light - spacemacs-dark - monokai - zenburn) - ;; If non nil the cursor color matches the state color. - dotspacemacs-colorize-cursor-according-to-state t - ;; Default font. `powerline-scale' allows to quickly tweak the mode-line - ;; size to make separators look not too crappy. - dotspacemacs-default-font '("Source Code Pro" - :size 14 - :weight normal - :width normal - :powerline-scale 1.1) - ;; The leader key - dotspacemacs-leader-key "SPC" - ;; The leader key accessible in `emacs state' and `insert state' - dotspacemacs-emacs-leader-key "M-m" - ;; Major mode leader key is a shortcut key which is the equivalent of - ;; pressing ` m`. Set it to `nil` to disable it. - dotspacemacs-major-mode-leader-key "," - ;; Major mode leader key accessible in `emacs state' and `insert state' - dotspacemacs-major-mode-emacs-leader-key "C-M-m" - ;; The command key used for Evil commands (ex-commands) and - ;; Emacs commands (M-x). - ;; By default the command key is `:' so ex-commands are executed like in Vim - ;; with `:' and Emacs commands are executed with ` :'. - dotspacemacs-command-key ":" - ;; If non nil then `ido' replaces `helm' for some commands. For now only - ;; `find-files' (SPC f f) is replaced. - dotspacemacs-use-ido t - ;; If non nil the paste micro-state is enabled. When enabled pressing `p` - ;; several times cycle between the kill ring content. - dotspacemacs-enable-paste-micro-state nil - ;; Guide-key delay in seconds. The Guide-key is the popup buffer listing - ;; the commands bound to the current keystrokes. - dotspacemacs-guide-key-delay 0.4 - ;; If non nil a progress bar is displayed when spacemacs is loading. This - ;; may increase the boot time on some systems and emacs builds, set it to - ;; nil ;; to boost the loading time. - dotspacemacs-loading-progress-bar t - ;; If non nil the frame is fullscreen when Emacs starts up. - ;; (Emacs 24.4+ only) - dotspacemacs-fullscreen-at-startup nil - ;; If non nil `spacemacs/toggle-fullscreen' will not use native fullscreen. - ;; Use to disable fullscreen animations in OSX." - dotspacemacs-fullscreen-use-non-native nil - ;; If non nil the frame is maximized when Emacs starts up. - ;; Takes effect only if `dotspacemacs-fullscreen-at-startup' is nil. - ;; (Emacs 24.4+ only) - dotspacemacs-maximized-at-startup nil - ;; A value from the range (0..100), in increasing opacity, which describes - ;; the transparency level of a frame when it's active or selected. - ;; Transparency can be toggled through `toggle-transparency'. - dotspacemacs-active-transparency 90 - ;; A value from the range (0..100), in increasing opacity, which describes - ;; the transparency level of a frame when it's inactive or deselected. - ;; Transparency can be toggled through `toggle-transparency'. - dotspacemacs-inactive-transparency 90 - ;; If non nil unicode symbols are displayed in the mode line. - dotspacemacs-mode-line-unicode-symbols t - ;; If non nil smooth scrolling (native-scrolling) is enabled. Smooth - ;; scrolling overrides the default behavior of Emacs which recenters the - ;; point when it reaches the top or bottom of the screen. - dotspacemacs-smooth-scrolling t - ;; If non-nil smartparens-strict-mode will be enabled in programming modes. - dotspacemacs-smartparens-strict-mode nil - ;; Select a scope to highlight delimiters. Possible value is `all', - ;; `current' or `nil'. Default is `all' - dotspacemacs-highlight-delimiters 'all - ;; If non nil advises quit functions to keep server open when quitting. - dotspacemacs-persistent-server nil - ;; List of search tool executable names. Spacemacs uses the first installed - ;; tool of the list. Supported tools are `ag', `pt', `ack' and `grep'. - dotspacemacs-search-tools '("ag" "pt" "ack" "grep") - ;; The default package repository used if no explicit repository has been - ;; specified with an installed package. - ;; Not used for now. - dotspacemacs-default-package-repository nil - ;; Disable setting the cursor color according to states - dotspacemacs-colorize-cursor-according-to-state nil - ) - ;; User initialization goes here - ) - -(defun dotspacemacs/config () - "Configuration function. - This function is called at the very end of Spacemacs initialization after -layers configuration." - (setq powerline-default-separator nil) - (setq TeX-PDF-mode t - Tex-command-default 'TeX) - (setq undo-tree-auto-save-history t - undo-tree-history-directory-alist - `(("." . ,(concat spacemacs-cache-directory "undo")))) - (unless (file-exists-p (concat spacemacs-cache-directory "undo")) - (make-directory (concat spacemacs-cache-directory "undo"))) - - (setq TeX-view-program-selection - '(((output-dvi style-pstricks) - "dvips and gv") - (output-dvi "xdvi") - (output-pdf "zathura") - (output-html "xdg-open"))) - - (setq TeX-view-program-list - '(("zathura" - ("zathura" (mode-io-correlate "-sync.sh") - " " - (mode-io-correlate "%n:1:%t ") - "%o")))) - - (advice-add #'magit-key-mode-popup-committing :after - (lambda () - (magit-key-mode-toggle-option (quote committing) "--verbose"))) -) - -;; Do not write anything past this comment. This is where Emacs will -;; auto-generate custom variable definitions. - - -(custom-set-variables - ;; custom-set-variables was added by Custom. - ;; If you edit it by hand, you could mess it up, so be careful. - ;; Your init file should contain only one such instance. - ;; If there is more than one, they won't work right. - '(ac-ispell-requires 4) - '(ahs-case-fold-search nil) - '(ahs-default-range (quote ahs-range-whole-buffer)) - '(ahs-idle-interval 0.25) - '(ahs-idle-timer 0 t) - '(ahs-inhibit-face-list nil) - '(ring-bell-function (quote ignore) t) - '(send-mail-function (quote smtpmail-send-it))) -(custom-set-faces - ;; custom-set-faces was added by Custom. - ;; If you edit it by hand, you could mess it up, so be careful. - ;; Your init file should contain only one such instance. - ;; If there is more than one, they won't work right. - )