X-Git-Url: https://git.shemshak.org/~bandali/configs/blobdiff_plain/bfe0aa235f9f16ff545bd99a0183e566b0b57100..ad65bea00265c8766030931b8dd244fe27dedf27:/rc.org
diff --git a/rc.org b/rc.org
index 9c69f2b..dcce8ab 100644
--- a/rc.org
+++ b/rc.org
@@ -625,13 +625,71 @@ timeout = 0
Helvetica
-
+
Liberation Sans
-
+
#+end_src
+** getmail
+
+*** getmailrc
+:PROPERTIES:
+:header-args+: :tangle ~/.getmail/getmailrc
+:END:
+
+#+begin_src conf
+[retriever]
+type = SimplePOP3SSLRetriever
+server = fencepost.gnu.org
+username = aminb
+password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
+port = 995
+use_apop = True
+
+[destination]
+type = Maildir
+path = ~/mail/gnu/Inbox/
+
+[options]
+delete = True
+#+end_src
+
+*** getmail.service
+:PROPERTIES:
+:header-args+: :tangle ~/.config/systemd/user/getmail.service
+:END:
+
+#+begin_src conf :tangle no
+[Unit]
+Description=getmail service
+
+[Service]
+Type=oneshot
+ExecStart=/usr/bin/getmail
+StandardOutput=syslog
+StandardError=syslog
+#+end_src
+
+*** getmail.timer
+:PROPERTIES:
+:header-args+: :tangle ~/.config/systemd/user/getmail.timer
+:END:
+
+#+begin_src conf :tangle no
+[Unit]
+Description=getmail timer
+
+[Timer]
+OnCalendar=*:0/30
+Persistent=true
+Unit=getmail.service
+
+[Install]
+WantedBy=timers.target
+#+end_src
+
** Git
*** gitconfig
@@ -643,8 +701,8 @@ timeout = 0
#+begin_src conf
[user]
name = Amin Bandali
- email = amin@aminb.org
- signingkey = 4E05246AB0BF7FFB
+ email = amin@gnu.org
+ signingkey = CDDE75F903538E71813CDA27D1FBA36627D65876
#+end_src
**** signing
@@ -686,6 +744,8 @@ timeout = 0
pr = pull --rebase
ps = push
psf = push --force
+ nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f"
+ nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f"
#+end_src
**** color
@@ -721,8 +781,8 @@ timeout = 0
**** send-email
#+begin_src conf
[sendemail]
- smtpuser = amin@aminb.org
- smtpserver = nix.aminb.org
+ smtpuser = aminb
+ smtpserver = fencepost.gnu.org
smtpserverport = 587
smtpencryption = tls
annotate = yes
@@ -743,100 +803,6 @@ timeout = 0
*-autoloads.el
#+end_src
-** Latexmk
-:PROPERTIES:
-:header-args+: :tangle ~/.latexmkrc
-:END:
-
-#+begin_src conf
-$pdf_previewer = "start zathura %O %S";
-$clean_ext = "aux out";
-
-# $pdf_update_method = 4;
-# $pdf_update_command = "zathura %O %S";
-
-# Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
-# by Ctrl+click in the PDF.
-# Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
-# editor.
-# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
-#+end_src
-
-** libinput
-
-Improve XPS 15 9560's touchpad experience.
-
-# begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
-#+begin_src conf :tangle no
-Section "InputClass"
- Identifier "libinput touchpad catchall"
- Driver "libinput"
- MatchIsTouchpad "on"
- Option "ClickMethod" "clickfinger"
- Option "NaturalScrolling" "true"
- Option "Tapping" "on"
- Option "TappingButtonMap" "lrm"
-EndSection
-#+end_src
-
-** getmail
-
-*** getmailrc
-:PROPERTIES:
-:header-args+: :tangle ~/.getmail/getmailrc
-:END:
-
-#+begin_src conf
-[retriever]
-type = SimplePOP3SSLRetriever
-server = fencepost.gnu.org
-username = aminb
-password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
-port = 995
-use_apop = True
-
-[destination]
-type = Maildir
-path = ~/mail/gnu/Inbox/
-
-[options]
-delete = True
-#+end_src
-
-*** getmail.service
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/getmail.service
-:END:
-
-#+begin_src conf :tangle no
-[Unit]
-Description=getmail service
-
-[Service]
-Type=oneshot
-ExecStart=/usr/bin/getmail
-StandardOutput=syslog
-StandardError=syslog
-#+end_src
-
-*** getmail.timer
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/getmail.timer
-:END:
-
-#+begin_src conf :tangle no
-[Unit]
-Description=getmail timer
-
-[Timer]
-OnCalendar=*:0/30
-Persistent=true
-Unit=getmail.service
-
-[Install]
-WantedBy=timers.target
-#+end_src
-
** GnuPG
:PROPERTIES:
:header-args+: :tangle ~/.gnupg/gpg-agent.conf
@@ -885,6 +851,132 @@ gtk-font-name = Ubuntu 10
# gtk-key-theme-name = Emacs
#+end_src
+** [[https://github.com/Leinnan/i3gs][i3gs]]
+:PROPERTIES:
+:header-args+: :tangle ~/.config/i3gs/config
+:END:
+
+#+begin_src conf :comments none :tangle no
+borders_width=0 0 2 0
+separator_width=10
+
+#[mpd]
+#preset=MPD
+#title= ï
+#borders_color=#7FDBFF
+
+[ram]
+preset=RAM
+title= ï¾
+borders_color=#3D9970
+
+#[cpu]
+#preset=CPU
+#title= ï¤
+#borders_color=#2ECC40
+
+#[hdd]
+#preset=HDD
+#title= ï
+#borders_color=#01FF70
+
+[volume]
+command=volume-info
+title=ï§
+borders_color=#7FDBFF
+
+[battery]
+preset=BAT
+command=battery-percentage-time
+title= ï
+borders_color=#39CCCC
+
+[wifi]
+preset=WIFI
+title= ï«
+borders_color=#01FF70
+
+[date]
+preset=DATE
+command=date '+%-I:%M, %a %b %d '
+title= ï
+borders_color=#FFDC00
+separator_width=0
+#+end_src
+
+** i3status
+:PROPERTIES:
+:header-args+: :tangle ~/.config/i3status/config
+:END:
+
+#+begin_src conf :comments none
+# i3status configuration file.
+# see "man i3status" for documentation.
+
+# It is important that this file is edited as UTF-8.
+# The following line should contain a sharp s:
+# Ã
+# If the above line is not correctly displayed, fix your editor first!
+
+general {
+ colors = true
+ interval = 5
+}
+
+# order += "ipv6"
+order += "disk /"
+order += "disk /data"
+order += "wireless _first_"
+# order += "ethernet _first_"
+order += "battery 0"
+order += "volume master"
+order += "load"
+order += "tztime local"
+
+wireless _first_ {
+ format_up = "W:%quality %essid %ip"
+ format_down = "W: down"
+}
+
+# ethernet _first_ {
+# # if you use %speed, i3status requires root privileges
+# format_up = "E: %ip (%speed)"
+# format_down = "E: down"
+# }
+
+battery 0 {
+ format = "%status %percentage %remaining (%consumption)"
+ path = "/sys/class/power_supply/BAT%d/uevent"
+ low_threshold = "10"
+ threshold_type = "percentage"
+ last_full_capacity = true
+ integer_battery_capacity = true
+ hide_seconds = true
+}
+
+tztime local {
+ format = "%-I:%M%P %a %b %d"
+}
+
+volume master {
+ format = "⪠%volume"
+ format_muted = "ð %volume"
+ device = "pulse"
+}
+
+load {
+ format = "%1min"
+}
+
+disk "/" {
+ format = "/ %avail"
+}
+
+disk "/data" {
+ format = "/data %avail"
+}
+#+end_src
+
** isync
*** mbsyncrc
@@ -975,6 +1067,42 @@ Unit=mbsync.service
WantedBy=timers.target
#+end_src
+** Latexmk
+:PROPERTIES:
+:header-args+: :tangle ~/.latexmkrc
+:END:
+
+#+begin_src conf
+$pdf_previewer = "start zathura %O %S";
+$clean_ext = "aux out";
+
+# $pdf_update_method = 4;
+# $pdf_update_command = "zathura %O %S";
+
+# Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
+# by Ctrl+click in the PDF.
+# Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
+# editor.
+# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
+#+end_src
+
+** libinput
+
+Improve XPS 15 9560's touchpad experience.
+
+# begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
+#+begin_src conf :tangle no
+Section "InputClass"
+ Identifier "libinput touchpad catchall"
+ Driver "libinput"
+ MatchIsTouchpad "on"
+ Option "ClickMethod" "clickfinger"
+ Option "NaturalScrolling" "true"
+ Option "Tapping" "on"
+ Option "TappingButtonMap" "lrm"
+EndSection
+#+end_src
+
** mpd
:PROPERTIES:
:header-args+: :tangle ~/.config/mpd/mpd.conf
@@ -1407,7 +1535,8 @@ logfile ~/.msmtp.log
# aminb
account aminb
host nix.aminb.org
-tls_fingerprint 65:DD:B8:32:D8:CD:F1:DC:B6:34:EE:35:04:18:AC:09:F3:1D:6D:20:F2:4A:E2:BD:64:48:B7:1F:90:BD:C4:BA
+# use `msmtp -a aminb --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
+tls_fingerprint 98:C7:F0:02:7F:2B:D8:B6:D3:BF:E8:C1:D4:07:6B:B5:6C:B1:C7:5D:97:20:70:88:AB:9E:B5:09:5D:2C:DC:8E
tls_starttls on
from amin@aminb.org
user amin@aminb.org
@@ -1423,6 +1552,14 @@ from aminb@gnu.org
user aminb
passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
+# gnu (amin)
+account gnu-amin : gnu
+from amin@gnu.org
+
+# gnu (mab)
+account gnu-mab : gnu
+from mab@gnu.org
+
# uwaterloo
account uwaterloo
host connect.uwaterloo.ca
@@ -1432,10 +1569,6 @@ user abandali
passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
tls_trust_file /etc/ssl/certs/ca-certificates.crt
-# uwaterloo (friendly address)
-account uwaterloo-friendly : uwaterloo
-from amin.bandali@uwaterloo.ca
-
# Set a default account
account default : aminb
#+end_src
@@ -2058,7 +2191,7 @@ path=/home/amin/mail
[user]
name=Amin Bandali
primary_email=amin@aminb.org
-other_email=abandali@uwaterloo.ca;amin.bandali@uwaterloo.ca;aminb@gnu.org;
+other_email=amin@gnu.org;abandali@uwaterloo.ca;mab@gnu.org;aminb@gnu.org;
# Configuration for "notmuch new"
#
@@ -2144,31 +2277,32 @@ sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
#+begin_src sh
# apply sent tag to messages sent by me
-notmuch tag -new +sent -- from:amin@aminb.org or from:aminb@gnu.org or from:abandali@uwaterloo.ca or from:amin.bandali@uwaterloo.ca
+notmuch tag -new +sent -- from:amin@aminb.org or from:amin@gnu.org or from:mab@gnu.org or from:aminb@gnu.org or from:abandali@uwaterloo.ca
# initial tagging
-notmuch tag -latest -- tag:latest
+notmuch tag -latest -- tag:latest
notmuch tag +inbox +unread +latest -new -- tag:new
# apply tags to lists
#
-notmuch tag -inbox +lists/~sircmpwn/srht-admins -- folder:amin/lists/~sircmpwn/srht-admins
-notmuch tag -inbox +lists/~sircmpwn/srht-announce -- folder:amin/lists/~sircmpwn/srht-announce
-notmuch tag -inbox +lists/~sircmpwn/srht-dev -- folder:amin/lists/~sircmpwn/srht-dev
-notmuch tag -inbox +lists/~sircmpwn/srht-discuss -- folder:amin/lists/~sircmpwn/srht-discuss
-
notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
notmuch tag -inbox +lists/haskell-weekly -- folder:amin/lists/haskell-weekly
-notmuch tag -inbox +pay -- folder:amin/pay
+notmuch tag -inbox +pay -- folder:amin/pay
+notmuch tag -inbox +banking -- folder:amin/banking
+notmuch tag -inbox +work -- folder:amin/work
#
#
-notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
-notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
+notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
+notmuch tag -inbox +uw/cs846 -- folder:uwaterloo/lists/cs846
+notmuch tag -inbox +uw/ece750 -- folder:uwaterloo/lists/ece750
+notmuch tag -inbox +uw/se212 -- folder:uwaterloo/lists/se212
+notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
+notmuch tag -inbox +lists/alloytools -- folder:uwaterloo/lists/alloytools
notmuch tag -inbox +lists/clvsingle -- folder:uwaterloo/lists/Clvsingle
notmuch tag -inbox +lists/gsa -- folder:uwaterloo/lists/GSA
notmuch tag -inbox +lists/math-grad -- folder:uwaterloo/lists/Math-grad
@@ -2177,22 +2311,28 @@ notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-stu
#
#
-notmuch tag -inbox +lists/emacs-devel -- folder:gnu/l/emacs-devel
-notmuch tag -inbox +lists/emacs-orgmode -- folder:gnu/l/emacs-orgmode
-notmuch tag -inbox +lists/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
-notmuch tag -inbox +lists/fencepost-users -- folder:gnu/l/fencepost-users
-notmuch tag -inbox +lists/guix-devel -- folder:gnu/l/guix-devel
-notmuch tag -inbox +lists/guile-devel -- folder:gnu/l/guile-devel
-notmuch tag -inbox +lists/help-gnu-emacs -- folder:gnu/l/help-gnu-emacs
-notmuch tag -inbox +lists/info-gnu-emacs -- folder:gnu/l/info-gnu-emacs
-notmuch tag -inbox +lists/www-commits -- folder:gnu/l/www-commits
-notmuch tag -inbox +lists/www-discuss -- folder:gnu/l/www-discuss
-notmuch tag -inbox +webmasters -- folder:gnu/webmasters
-
-notmuch tag -inbox +lists/deepspec -- folder:gnu/l/deepspec
-notmuch tag -inbox +lists/haskell-cafe -- folder:gnu/l/haskell-cafe
-notmuch tag -inbox +lists/haskell-art -- folder:gnu/l/haskell-art
-notmuch tag -inbox +lists/notmuch -- folder:gnu/l/notmuch
+notmuch tag -inbox +l/emacs-devel -- folder:gnu/l/emacs-devel
+notmuch tag -inbox +l/emacs-orgmode -- folder:gnu/l/emacs-orgmode
+notmuch tag -inbox +l/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
+notmuch tag -inbox +l/fencepost-users -- folder:gnu/l/fencepost-users
+notmuch tag -inbox +l/guix-devel -- folder:gnu/l/guix-devel
+notmuch tag -inbox +l/guile-devel -- folder:gnu/l/guile-devel
+notmuch tag -inbox +l/help-gnu-emacs -- folder:gnu/l/help-gnu-emacs
+notmuch tag -inbox +l/info-gnu-emacs -- folder:gnu/l/info-gnu-emacs
+notmuch tag -inbox +l/www-commits -- folder:gnu/l/www-commits
+notmuch tag -inbox +l/www-discuss -- folder:gnu/l/www-discuss
+notmuch tag -inbox +webmasters -- folder:gnu/webmasters
+
+notmuch tag -inbox +l/deepspec -- folder:gnu/l/deepspec
+notmuch tag -inbox +l/haskell-cafe -- folder:gnu/l/haskell-cafe
+notmuch tag -inbox +l/haskell-art -- folder:gnu/l/haskell-art
+notmuch tag -inbox +l/notmuch -- folder:gnu/l/notmuch
+
+notmuch tag -inbox +l/~aminb/test-priv -- folder:gnu/l/~aminb/test-priv
+notmuch tag -inbox +l/~sircmpwn/sr.ht-admins -- folder:gnu/l/~sircmpwn/sr.ht-admins
+notmuch tag -inbox +l/~sircmpwn/sr.ht-announce -- folder:gnu/l/~sircmpwn/sr.ht-announce
+notmuch tag -inbox +l/~sircmpwn/sr.ht-dev -- folder:gnu/l/~sircmpwn/sr.ht-dev
+notmuch tag -inbox +l/~sircmpwn/sr.ht-discuss -- folder:gnu/l/~sircmpwn/sr.ht-discuss
#
notmuch tag -inbox -unread +archive/notmuch -- path:archive/notmuch/**
@@ -2375,6 +2515,19 @@ if anyof (
fileinto :create "l/${listname}";
}
}
+
+if anyof (
+ header :contains "list-id" "<~aminb/test-priv@lists.sr.ht>",
+ header :contains "list-id" "<~sircmpwn/sr.ht-admins@lists.sr.ht>",
+ header :contains "list-id" "<~sircmpwn/sr.ht-announce@lists.sr.ht>",
+ header :contains "list-id" "<~sircmpwn/sr.ht-dev@lists.sr.ht>",
+ header :contains "list-id" "<~sircmpwn/sr.ht-discuss@lists.sr.ht>") {
+ if header :regex "list-id" "(~[a-z_0-9-]+)/([a-z_0-9.-]+)@" {
+ set :lower "username" "${1}";
+ set :lower "listname" "${2}";
+ fileinto :create "l/${username}/${listname}";
+ }
+}
#+end_src
** polybar
@@ -3617,10 +3770,12 @@ insert_pass="Alt+n"
#+begin_src conf
exec xrdb .Xresources
+exec dunst
### Variables
-#
-# Logo key. Use Mod1 for Alt.
+# super
set $mod Mod4
+# alt
+set $mod2 Mod1
set $left h
set $down j
set $up k
@@ -3640,18 +3795,12 @@ output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
# You can get the names of your outputs by running: swaymsg -t get_outputs
### Idle configuration
-#
-# Example configuration:
-#
-#exec swayidle \
-# timeout 300 'swaylock -c 000000' \
-# timeout 600 'swaymsg "output * dpms off"' \
-# resume 'swaymsg "output * dpms on"' \
-# before-sleep 'swaylock -c 000000'
-#
-# This will lock your screen after 300 seconds of inactivity, then turn off
-# your displays after another 600 seconds, and turn your screens back on when
-# resumed. It will also lock your screen before your computer goes to sleep.
+
+exec swayidle \
+ timeout 60 swaylock \
+ timeout 120 'swaymsg "output * dpms off"' \
+ resume 'swaymsg "output * dpms on"' \
+ before-sleep swaylock
### Input configuration
@@ -3660,11 +3809,14 @@ input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
tap enabled
natural_scroll enabled
middle_emulation enabled
+ click_method clickfinger
}
input "1:1:AT_Translated_Set_2_keyboard" {
repeat_delay 200
repeat_rate 45
+ xkb_layout us,ir
+ xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
}
@@ -3681,12 +3833,15 @@ input "1:1:AT_Translated_Set_2_keyboard" {
# start your launcher
bindsym $mod+d exec $menu
+ # password manager
+ bindsym $mod2+space exec rofi-pass
+
# Drag floating windows by holding down $mod and left mouse button.
# Resize them with right mouse button + $mod.
# Despite the name, also works for non-floating windows.
# Change normal to inverse to use left mouse button for resizing and right
# mouse button for dragging.
- #floating_modifier $mod normal
+ floating_modifier $mod normal
# reload the configuration file
bindsym $mod+Shift+c reload
@@ -3698,11 +3853,22 @@ input "1:1:AT_Translated_Set_2_keyboard" {
bindsym XF86MonBrightnessUp exec light -A 5 # increase screen brightness
bindsym XF86MonBrightnessDown exec light -U 5 # decrease screen brightness
- bindsym $mod+bracketleft exec sway-ws-util switch prev
- bindsym $mod+bracketright exec sway-ws-util switch next
+ bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
+ bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
+ bindsym XF86AudioMute exec pamixer --toggle-mute
+ bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
- bindsym $mod+braceleft exec sway-ws-util move prev follow
- bindsym $mod+braceright exec sway-ws-util move next follow
+ # original sway workspace switch and window move
+ bindsym $mod+bracketleft workspace prev
+ bindsym $mod+bracketright workspace next
+ bindsym $mod+braceleft move container to workspace prev
+ bindsym $mod+braceright move container to workspace next
+
+ # bspwm-esque workspace switch and window move
+ bindsym $mod2+bracketleft exec sway-ws-util switch prev
+ bindsym $mod2+bracketright exec sway-ws-util switch next
+ bindsym $mod2+braceleft exec sway-ws-util move prev follow
+ bindsym $mod2+braceright exec sway-ws-util move next follow
#
# Moving around:
#
@@ -3814,7 +3980,7 @@ mode "resize" {
bindsym Return mode "default"
bindsym Escape mode "default"
}
-bindsym $mod+r mode "resize"
+bindsym $mod+Shift+r mode "resize"
#
# Status Bar:
@@ -3827,18 +3993,27 @@ bar {
background #323232
inactive_workspace #32323200 #32323200 #5c5c5c
}
- status_command i3blocks
+ status_command i3status
}
include /etc/sway/config.d/*
#+end_src
+** swaylock
+:PROPERTIES:
+:header-args+: :tangle ~/.config/swaylock/config
+:END:
+
+#+begin_src conf
+image=/home/amin/usr/pics/wp/wp2445784-blurred-wallpapers.jpg
+scaling=fill
+#+end_src
+
** TLP
-*** TODO enigma
-*** plasma
+*** langa
-#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/default/tlp")
+#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "langa")) "/sudo::/etc/default/tlp")
# ------------------------------------------------------------------------------
# tlp - Parameters for power saving
# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
@@ -4034,7 +4209,6 @@ RUNTIME_PM_ON_BAT=auto
# Exclude PCI(e) device adresses the following list from Runtime PM
# (separate with spaces). Use lspci to get the adresses (1st column).
#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
-RUNTIME_PM_BLACKLIST="01:00.0"
# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
# Default when unconfigured is "amdgpu nouveau nvidia radeon" which
@@ -4081,11 +4255,12 @@ USB_BLACKLIST_WWAN=1
# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
# are ignored when this is enabled!
#RESTORE_DEVICE_STATE_ON_STARTUP=0
-RESTORE_DEVICE_STATE_ON_STARTUP=1
+RESTORE_DEVICE_STATE_ON_STARTUP=0
# Radio devices to disable on startup: bluetooth, wifi, wwan.
# Separate multiple devices with spaces.
#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
+DEVICES_TO_DISABLE_ON_STARTUP="bluetooth"
# Radio devices to enable on startup: bluetooth, wifi, wwan.
# Separate multiple devices with spaces.
@@ -4149,20 +4324,333 @@ RESTORE_DEVICE_STATE_ON_STARTUP=1
#DEVICES_TO_DISABLE_ON_UNDOCK=""
#+end_src
-** X
-
-*** xprofile
-:PROPERTIES:
-:header-args+: :tangle ~/.xprofile
-:END:
+*** pary
-=~/.xprofile= is similar in style to =~/.xinitrc=, but on the
-contrary, it's automatically sourced by LightDM, my display manager of
-choice.
+#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "pary")) "/sudo::/etc/default/tlp")
+# ------------------------------------------------------------------------------
+# tlp - Parameters for power saving
+# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
-#+begin_src sh :tangle no
-xset -b # disable bell
-xset r rate 200 45 # repeat delay (ms) and rate (repeats/sec)
+# Hint: some features are disabled by default, remove the leading # to enable
+# them.
+
+# Set to 0 to disable, 1 to enable TLP.
+TLP_ENABLE=1
+
+# Operation mode when no power supply can be detected: AC, BAT.
+# Concerns some desktop and embedded hardware only.
+TLP_DEFAULT_MODE=AC
+
+# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
+# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
+TLP_PERSISTENT_DEFAULT=0
+
+# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
+# Non-zero value enables, zero disables laptop mode.
+DISK_IDLE_SECS_ON_AC=0
+DISK_IDLE_SECS_ON_BAT=2
+
+# Dirty page values (timeouts in secs).
+MAX_LOST_WORK_SECS_ON_AC=15
+MAX_LOST_WORK_SECS_ON_BAT=60
+
+# Hint: CPU parameters below are disabled by default, remove the leading #
+# to enable them, otherwise kernel default values are used.
+
+# Select a CPU frequency scaling governor.
+# Intel Core i processor with intel_pstate driver:
+# powersave(*), performance.
+# Older hardware with acpi-cpufreq driver:
+# ondemand(*), powersave, performance, conservative, schedutil.
+# (*) is recommended.
+# Hint: use tlp-stat -p to show the active driver and available governors.
+# Important:
+# powersave for intel_pstate and ondemand for acpi-cpufreq are power
+# efficient for *almost all* workloads and therefore kernel and most
+# distributions have chosen them as defaults. If you still want to change,
+# you should know what you're doing! You *must* disable your distribution's
+# governor settings or conflicts will occur.
+#CPU_SCALING_GOVERNOR_ON_AC=powersave
+#CPU_SCALING_GOVERNOR_ON_BAT=powersave
+
+# Set the min/max frequency available for the scaling governor.
+# Possible values strongly depend on your CPU. For available frequencies see
+# the output of tlp-stat -p.
+#CPU_SCALING_MIN_FREQ_ON_AC=0
+#CPU_SCALING_MAX_FREQ_ON_AC=0
+#CPU_SCALING_MIN_FREQ_ON_BAT=0
+#CPU_SCALING_MAX_FREQ_ON_BAT=0
+
+# Set energy performance hints (HWP) for Intel P-state governor:
+# performance, balance_performance, default, balance_power, power
+# Values are given in order of increasing power saving.
+# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
+CPU_HWP_ON_AC=balance_performance
+CPU_HWP_ON_BAT=balance_power
+
+# Set Intel P-state performance: 0..100 (%).
+# Limit the max/min P-state to control the power dissipation of the CPU.
+# Values are stated as a percentage of the available performance.
+# Requires an Intel Core i processor with intel_pstate driver.
+#CPU_MIN_PERF_ON_AC=0
+#CPU_MAX_PERF_ON_AC=100
+#CPU_MIN_PERF_ON_BAT=0
+#CPU_MAX_PERF_ON_BAT=30
+
+# Set the CPU "turbo boost" feature: 0=disable, 1=allow
+# Requires an Intel Core i processor.
+# Important:
+# - This may conflict with your distribution's governor settings
+# - A value of 1 does *not* activate boosting, it just allows it
+#CPU_BOOST_ON_AC=1
+#CPU_BOOST_ON_BAT=0
+
+# Minimize number of used CPU cores/hyper-threads under light load conditions:
+# 0=disable, 1=enable.
+SCHED_POWERSAVE_ON_AC=0
+SCHED_POWERSAVE_ON_BAT=1
+
+# Kernel NMI Watchdog:
+# 0=disable (default, saves power), 1=enable (for kernel debugging only).
+NMI_WATCHDOG=0
+
+# Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
+# Frequency voltage pairs are written to:
+# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
+# CAUTION: only use this, if you thoroughly understand what you are doing!
+#PHC_CONTROLS="F:V F:V F:V F:V"
+
+# Set CPU performance versus energy savings policy:
+# performance, balance-performance, default, balance-power, power.
+# Values are given in order of increasing power saving.
+# Requires kernel module msr and x86_energy_perf_policy from linux-tools.
+ENERGY_PERF_POLICY_ON_AC=performance
+ENERGY_PERF_POLICY_ON_BAT=balance-power
+
+# Disk devices; separate multiple devices with spaces (default: sda).
+# Devices can be specified by disk ID also (lookup with: tlp diskid).
+DISK_DEVICES="sda sdb"
+
+# Disk advanced power management level: 1..254, 255 (max saving, min, off).
+# Levels 1..127 may spin down the disk; 255 allowable on most drives.
+# Separate values for multiple disks with spaces. Use the special value 'keep'
+# to keep the hardware default for the particular disk.
+DISK_APM_LEVEL_ON_AC="254 254"
+DISK_APM_LEVEL_ON_BAT="128 128"
+
+# Hard disk spin down timeout:
+# 0: spin down disabled
+# 1..240: timeouts from 5s to 20min (in units of 5s)
+# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
+# See 'man hdparm' for details.
+# Separate values for multiple disks with spaces. Use the special value 'keep'
+# to keep the hardware default for the particular disk.
+#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
+#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
+
+# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
+# Separate values for multiple disks with spaces. Use the special value 'keep'
+# to keep the kernel default scheduler for the particular disk.
+#DISK_IOSCHED="cfq cfq"
+
+# AHCI link power management (ALPM) for disk devices:
+# min_power, med_power_with_dipm(*), medium_power, max_performance.
+# (*) Kernel >= 4.15 required, then recommended.
+# Multiple values separated with spaces are tried sequentially until success.
+SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
+SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
+
+# Exclude host devices from AHCI link power management.
+# Separate multiple hosts with spaces.
+#SATA_LINKPWR_BLACKLIST="host1"
+
+# Runtime Power Management for AHCI host and disks devices:
+# on=disable, auto=enable.
+# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
+#AHCI_RUNTIME_PM_ON_AC=on
+#AHCI_RUNTIME_PM_ON_BAT=on
+
+# Seconds of inactivity before disk is suspended.
+AHCI_RUNTIME_PM_TIMEOUT=15
+
+# PCI Express Active State Power Management (PCIe ASPM):
+# default, performance, powersave.
+PCIE_ASPM_ON_AC=performance
+PCIE_ASPM_ON_BAT=powersave
+
+# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
+# auto = mid on BAT, high on AC; default = use hardware defaults.
+RADEON_POWER_PROFILE_ON_AC=high
+RADEON_POWER_PROFILE_ON_BAT=low
+
+# Radeon dynamic power management method (DPM): battery, performance.
+RADEON_DPM_STATE_ON_AC=performance
+RADEON_DPM_STATE_ON_BAT=battery
+
+# Radeon DPM performance level: auto, low, high; auto is recommended.
+RADEON_DPM_PERF_LEVEL_ON_AC=auto
+RADEON_DPM_PERF_LEVEL_ON_BAT=auto
+
+# WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
+WIFI_PWR_ON_AC=off
+WIFI_PWR_ON_BAT=on
+
+# Disable wake on LAN: Y/N.
+WOL_DISABLE=Y
+
+# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
+# A value of 0 disables, >=1 enables power saving (recommended: 1).
+SOUND_POWER_SAVE_ON_AC=0
+SOUND_POWER_SAVE_ON_BAT=0
+
+# Disable controller too (HDA only): Y/N.
+SOUND_POWER_SAVE_CONTROLLER=N
+
+# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
+# Drive can be powered on again by releasing (and reinserting) the eject lever
+# or by pressing the disc eject button on newer models.
+# Note: an UltraBay/MediaBay hard disk is never powered off.
+BAY_POWEROFF_ON_AC=0
+BAY_POWEROFF_ON_BAT=0
+# Optical drive device to power off (default sr0).
+BAY_DEVICE="sr0"
+
+# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
+RUNTIME_PM_ON_AC=on
+RUNTIME_PM_ON_BAT=auto
+
+# Exclude PCI(e) device adresses the following list from Runtime PM
+# (separate with spaces). Use lspci to get the adresses (1st column).
+#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
+RUNTIME_PM_BLACKLIST="01:00.0"
+
+# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
+# Default when unconfigured is "amdgpu nouveau nvidia radeon" which
+# prevents accidential power-on of dGPU in hybrid graphics setups.
+# Use "" to disable the feature completely.
+# Separate multiple drivers with spaces.
+#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
+
+# Set to 0 to disable, 1 to enable USB autosuspend feature.
+USB_AUTOSUSPEND=1
+
+# Exclude listed devices from USB autosuspend (separate with spaces).
+# Use lsusb to get the ids.
+# Note: input devices (usbhid) are excluded automatically
+#USB_BLACKLIST="1111:2222 3333:4444"
+
+# Bluetooth devices are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude.
+USB_BLACKLIST_BTUSB=0
+
+# Phone devices are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude (enable charging).
+USB_BLACKLIST_PHONE=0
+
+# Printers are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude.
+USB_BLACKLIST_PRINTER=1
+
+# WWAN devices are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude.
+USB_BLACKLIST_WWAN=1
+
+# Include listed devices into USB autosuspend even if already excluded
+# by the blacklists above (separate with spaces).
+# Use lsusb to get the ids.
+#USB_WHITELIST="1111:2222 3333:4444"
+
+# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
+# (workaround for USB devices that cause shutdown problems).
+#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
+
+# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
+# on system startup: 0=disable, 1=enable.
+# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
+# are ignored when this is enabled!
+#RESTORE_DEVICE_STATE_ON_STARTUP=0
+RESTORE_DEVICE_STATE_ON_STARTUP=1
+
+# Radio devices to disable on startup: bluetooth, wifi, wwan.
+# Separate multiple devices with spaces.
+#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
+
+# Radio devices to enable on startup: bluetooth, wifi, wwan.
+# Separate multiple devices with spaces.
+#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
+
+# Radio devices to disable on shutdown: bluetooth, wifi, wwan.
+# (workaround for devices that are blocking shutdown).
+#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
+
+# Radio devices to enable on shutdown: bluetooth, wifi, wwan.
+# (to prevent other operating systems from missing radios).
+#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
+
+# Radio devices to enable on AC: bluetooth, wifi, wwan.
+#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
+
+# Radio devices to disable on battery: bluetooth, wifi, wwan.
+#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
+
+# Radio devices to disable on battery when not in use (not connected):
+# bluetooth, wifi, wwan.
+#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
+
+# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
+# required). Charging starts when the remaining capacity falls below the
+# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
+# Main / Internal battery (values in %)
+#START_CHARGE_THRESH_BAT0=75
+#STOP_CHARGE_THRESH_BAT0=80
+# Ultrabay / Slice / Replaceable battery (values in %)
+#START_CHARGE_THRESH_BAT1=75
+#STOP_CHARGE_THRESH_BAT1=80
+
+# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
+#RESTORE_THRESHOLDS_ON_BAT=1
+
+# ------------------------------------------------------------------------------
+# tlp-rdw - Parameters for the radio device wizard
+# Possible devices: bluetooth, wifi, wwan.
+
+# Hints:
+# - Parameters are disabled by default, remove the leading # to enable them
+# - Separate multiple radio devices with spaces
+
+# Radio devices to disable on connect.
+#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
+#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
+#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
+
+# Radio devices to enable on disconnect.
+#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
+#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
+#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
+
+# Radio devices to enable/disable when docked.
+#DEVICES_TO_ENABLE_ON_DOCK=""
+#DEVICES_TO_DISABLE_ON_DOCK=""
+
+# Radio devices to enable/disable when undocked.
+#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
+#DEVICES_TO_DISABLE_ON_UNDOCK=""
+#+end_src
+
+** X
+
+*** xprofile
+:PROPERTIES:
+:header-args+: :tangle ~/.xprofile
+:END:
+
+=~/.xprofile= is similar in style to =~/.xinitrc=, but on the
+contrary, it's automatically sourced by LightDM, my display manager of
+choice.
+
+#+begin_src sh :tangle no
+xset -b # disable bell
+xset r rate 200 45 # repeat delay (ms) and rate (repeats/sec)
# setxkbmap -option compose:ralt
@@ -4649,7 +5137,7 @@ zhighlighters=(main brackets pattern)
#
# Load these ssh identities with the ssh module
-zssh_ids=(id_rsa plasma_id_rsa id_ed25519 id_rsa_aur)
+zssh_ids=(id_ed25519_amin)
#
@@ -4762,7 +5250,7 @@ ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
setopt globdots
source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
-source ~/.zsh/zsh-autopair/autopair.zsh
+# source ~/.zsh/zsh-autopair/autopair.zsh
### fzf ###
@@ -4816,6 +5304,34 @@ Xfce's presentation mode which keeps the screen awake, and
=rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
exact brightness value.
+** battery-percentage-time
+:PROPERTIES:
+:header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/sh"
+:END:
+
+#+begin_src sh :tangle no
+dbus_send() {
+ label=$1
+ dbus-send --print-reply=literal --system \
+ --dest=org.freedesktop.UPower \
+ /org/freedesktop/UPower/devices/battery_BAT0 \
+ org.freedesktop.DBus.Properties.Get \
+ string:org.freedesktop.UPower.Device \
+ string:"${label}" | awk '{print $3}'
+}
+
+perc=$(dbus_send 'Percentage')
+state=$(dbus_send 'State')
+
+if [ "$state" -eq 2 ]; then # Discharging
+ secs=$(dbus_send 'TimeToEmpty')
+elif [ "$state" -eq 1 ]; then # Charging
+ secs=$(dbus_send 'TimeToFull')
+fi
+
+printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60))
+#+end_src
+
** rofi-light
:PROPERTIES:
:header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
@@ -4833,7 +5349,6 @@ light -S $val
:END:
#+begin_src bash
-export XKB_DEFAULT_OPTIONS=ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt
export _JAVA_AWT_WM_NONREPARENTING=1
export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
light -Scrs "intel_backlight" 2
@@ -4848,8 +5363,8 @@ sway
#+begin_src bash
curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name')
-prev_ws=$((curr_ws-1))
-next_ws=$((curr_ws+1))
+[[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1))
+[[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1))
dest_ws=-1
op=-1
@@ -4860,7 +5375,7 @@ if [ "$1" = "switch" ] || [ "$1" = "move" ]; then
elif [ "$2" = "next" ]; then
dest_ws="$next_ws"
else
- echo "Usage: $0 $1 {prev|next}"
+ echo "Usage: $0 $1 {prev|next} [follow]"
exit 1
fi
else
@@ -4883,7 +5398,7 @@ fi
:header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
:END:
-#+begin_src bash
+#+begin_src bash :tangle no
lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
if [ "$lang" = "us" ]; then
@@ -4899,7 +5414,7 @@ fi
:header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
:END:
-#+begin_src bash
+#+begin_src bash :tangle no
xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
#+end_src
@@ -4918,7 +5433,7 @@ a few things:
- properly rotates the stylus pen and touch screen pointers, and
- toggles between RGB and Vertical BGR sub-pixel order.
-#+begin_src bash
+#+begin_src bash :tangle no
case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
0) # Screen is not rotated, we should rotate it right (90°)
xrandr -o 3
@@ -4946,12 +5461,27 @@ esac
:header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
:END:
-#+begin_src python
+#+begin_src python :tangle no
import gnomekeyring as gk
# list_item_ids_sync('login')[0] == 1L
gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
#+end_src
+** volume-info
+:PROPERTIES:
+:header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh"
+:END:
+
+#+begin_src sh :tangle no
+cur_vol=$(pamixer --get-volume)
+
+if [ $(pamixer --get-mute) = true ]; then
+ printf 'mt \n' "$cur_vol"
+else
+ printf '%02d \n' "$cur_vol"
+fi
+#+end_src
+
** wp
My little wallpaper changer script.