X-Git-Url: https://git.shemshak.org/~bandali/configs/blobdiff_plain/e2149232530c44e0f3d1ca51890765e90b772f8b..dab6b69b1c4a8be1f08d43e5ad6d4152f68310df:/rc.org?ds=sidebyside
diff --git a/rc.org b/rc.org
index c70155c..097e265 100644
--- a/rc.org
+++ b/rc.org
@@ -14,47 +14,6 @@ Note: This file is best viewed inside Emacs with org mode.
This section contains the configuration files (dotfiles) of various
programs I use.
-** [[https://github.com/afewmail/afew][afew]]
-:PROPERTIES:
-:header-args+: :tangle ~/.config/afew/config
-:END:
-
-#+begin_quote
-an initial tagging script for notmuch mail
-#+end_quote
-
-#+begin_src conf
-# This is the default filter chain
-[SpamFilter]
-#[ClassifyingFilter]
-[KillThreadsFilter]
-#[ListMailsFilter]
-[ArchiveSentMailsFilter]
-sent_tag = sent
-[InboxFilter]
-
-#[Filter.1]
-#query = 'folder:amin/lists/.haskell-cafe'
-#tags = +lists;+lists/haskell-cafe
-#message = lists/haskell-cafe
-
-#[Filter.2]
-#query = 'folder:amin/lists/.haskell-weekly'
-#tags = +lists;+lists/haskell-weekly
-#message = lists/haskell-weekly
-
-#[Filter.3]
-#query = 'folder:amin/lists/.hackernewsletter'
-#tags = +lists;+lists/hackernewsletter
-#message = lists/hackernewsletter
-
-
-#[FolderNameFilter]
-#folder_blacklist = Inbox
-#maildir_separator = /.
-#folder_transforms = Drafts:draft Junk:spam Trash:deleted Sent:sent Archive:archive lists/haskell-cafe:lists/haskell-cafe
-#+end_src
-
** bspwm
*** bspwmrc
@@ -62,11 +21,11 @@ sent_tag = sent
:header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
:END:
-#+begin_src sh
+#+begin_src sh :tangle no
sxhkd &
sh ~/.fehbg &
xfce4-panel -d &
-#compton &
+compton &
sleep 0.5 && pasystray --notify=all &
bspc monitor -d I II III IV V VI VII VIII IX X
@@ -85,7 +44,7 @@ bspc config gapless_monocle true
bspc config click_to_focus button1
bspc config directional_focus_tightness low
-bspc rule -a Firefox desktop='^1' follow=on
+#bspc rule -a Firefox desktop='^1' follow=on
bspc rule -a Nightly desktop='^1' follow=on
bspc rule -a Emacs desktop='^2' state=tiled follow=on
#bspc rule -a Chromium desktop='^4' follow=on
@@ -126,7 +85,7 @@ bspc rule -a Zathura state=tiled
:header-args+: :tangle ~/.config/sxhkd/sxhkdrc
:END:
-#+begin_src conf
+#+begin_src conf :tangle no
#
# wm independent hotkeys
#
@@ -177,6 +136,9 @@ XF86Audio{Raise,Lower}Volume
XF86AudioMute
pamixer --toggle-mute
+XF86AudioMicMute
+ pactl set-source-mute 1 toggle
+
# playback control
XF86Audio{Play,Prev,Next}
mpc {toggle,prev,next}
@@ -204,6 +166,9 @@ super + apostrophe
#XF86KbdBrightness{Up,Down}
# kbdlight {up,down}
+XF86RotateWindows
+ toggle-tablet
+
#
# bspwm hotkeys
#
@@ -323,7 +288,7 @@ super + {Left,Down,Up,Right}
:header-args+: :tangle ~/.config/compton.conf
:END:
-#+begin_src conf
+#+begin_src conf :tangle no
# Shadow
shadow = false; # Enabled client-side shadows on windows.
no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows.
@@ -424,6 +389,52 @@ wintypes:
};
#+end_src
+** dovecot
+:PROPERTIES:
+:header-args+: :tangle "/sudo::/etc/dovecot/dovecot.conf"
+:END:
+
+#+begin_src conf
+protocols = imap
+
+listen = 127.0.0.1
+log_path = /var/log/dovecot.log
+info_log_path = /var/log/dovecot-info.log
+
+ssl = no
+disable_plaintext_auth = no
+
+auth_verbose = yes
+auth_mechanisms = plain
+
+passdb {
+ driver = passwd-file
+ args = /etc/dovecot/passwd
+}
+
+userdb {
+ driver = static
+ args = uid=amin gid=amin home=/home/amin/mail/%d/%n
+ default_fields = mail=maildir:/home/amin/mail/%d/%n/mail
+}
+
+# mail_home = /home/amin/mail/%d/%n
+# mail_location = maildir:/home/amin/mail/%d/%n/mail:LAYOUT=fs:INBOX=/home/amin/mail/%d/%n/mail/Inbox
+
+# namespace {
+# inbox = yes
+# separator = /
+# }
+
+mail_plugins = $mail_plugins fts fts_lucene
+
+plugin {
+ fts = lucene
+ fts_lucene = whitespace_chars=@.
+ fts_autoindex = yes
+}
+#+end_src
+
** Dunst
:PROPERTIES:
:header-args+: :tangle ~/.config/dunst/dunstrc
@@ -660,13 +671,71 @@ timeout = 0
Helvetica
-
+
Liberation Sans
-
+
#+end_src
+** getmail
+
+*** getmailrc
+:PROPERTIES:
+:header-args+: :tangle ~/.getmail/getmailrc
+:END:
+
+#+begin_src conf
+[retriever]
+type = SimplePOP3SSLRetriever
+server = fencepost.gnu.org
+username = bandali
+password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
+port = 995
+use_apop = True
+
+[destination]
+type = Maildir
+path = ~/mail/gnu/Inbox/
+
+[options]
+delete = True
+#+end_src
+
+*** getmail.service
+:PROPERTIES:
+:header-args+: :tangle ~/.config/systemd/user/getmail.service
+:END:
+
+#+begin_src conf :tangle no
+[Unit]
+Description=getmail service
+
+[Service]
+Type=oneshot
+ExecStart=/usr/bin/getmail
+StandardOutput=syslog
+StandardError=syslog
+#+end_src
+
+*** getmail.timer
+:PROPERTIES:
+:header-args+: :tangle ~/.config/systemd/user/getmail.timer
+:END:
+
+#+begin_src conf :tangle no
+[Unit]
+Description=getmail timer
+
+[Timer]
+OnCalendar=*:0/30
+Persistent=true
+Unit=getmail.service
+
+[Install]
+WantedBy=timers.target
+#+end_src
+
** Git
*** gitconfig
@@ -678,14 +747,14 @@ timeout = 0
#+begin_src conf
[user]
name = Amin Bandali
- email = amin@aminb.org
- # signingkey = 4E05246AB0BF7FFB
+ email = bandali@gnu.org
+ signingkey = BE6273738E616D6D1B3A08E8A21A020248816103
#+end_src
**** signing
#+begin_src conf
-# [commit]
-# gpgsign = true
+[commit]
+ gpgsign = true
# [format]
# signoff = true
#+end_src
@@ -721,6 +790,8 @@ timeout = 0
pr = pull --rebase
ps = push
psf = push --force
+ nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f"
+ nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f"
#+end_src
**** color
@@ -753,6 +824,16 @@ timeout = 0
user = aminb
#+end_src
+**** send-email
+#+begin_src conf
+[sendemail]
+ smtpuser = bandali
+ smtpserver = fencepost.gnu.org
+ smtpserverport = 587
+ smtpencryption = tls
+ annotate = yes
+#+end_src
+
*** gitignore
:PROPERTIES:
:header-args+: :tangle ~/.gitignore_global
@@ -768,99 +849,6 @@ timeout = 0
*-autoloads.el
#+end_src
-** Latexmk
-:PROPERTIES:
-:header-args+: :tangle ~/.latexmkrc
-:END:
-
-#+begin_src conf
-$pdf_previewer = "start zathura %O %S";
-$clean_ext = "aux out";
-
-# $pdf_update_method = 4;
-# $pdf_update_command = "zathura %O %S";
-
-# Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
-# by Ctrl+click in the PDF.
-# Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
-# editor.
-# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
-#+end_src
-
-** libinput
-
-Improve XPS 15 9560's touchpad experience.
-
-#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
-Section "InputClass"
- Identifier "libinput touchpad catchall"
- Driver "libinput"
- MatchIsTouchpad "on"
- Option "ClickMethod" "clickfinger"
- Option "NaturalScrolling" "true"
- Option "Tapping" "on"
- Option "TappingButtonMap" "lrm"
-EndSection
-#+end_src
-
-** getmail
-
-*** getmailrc
-:PROPERTIES:
-:header-args+: :tangle ~/.getmail/getmailrc
-:END:
-
-#+begin_src conf
-[retriever]
-type = SimplePOP3SSLRetriever
-server = fencepost.gnu.org
-username = aminb
-password_command = ("gpg2", "--no-tty", "-q", "-d", "~/.passwd/gnu.gpg")
-port = 995
-use_apop = True
-
-[destination]
-type = Maildir
-path = ~/mail/gnu/Inbox/
-
-[options]
-delete = True
-#+end_src
-
-*** getmail.service
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/getmail.service
-:END:
-
-#+begin_src conf :tangle no
-[Unit]
-Description=getmail service
-
-[Service]
-Type=oneshot
-ExecStart=/usr/bin/getmail
-StandardOutput=syslog
-StandardError=syslog
-#+end_src
-
-*** getmail.timer
-:PROPERTIES:
-:header-args+: :tangle ~/.config/systemd/user/getmail.timer
-:END:
-
-#+begin_src conf :tangle no
-[Unit]
-Description=getmail timer
-
-[Timer]
-OnCalendar=*:0/30
-Persistent=true
-Unit=getmail.service
-
-[Install]
-WantedBy=timers.target
-#+end_src
-
** GnuPG
:PROPERTIES:
:header-args+: :tangle ~/.gnupg/gpg-agent.conf
@@ -909,6 +897,133 @@ gtk-font-name = Ubuntu 10
# gtk-key-theme-name = Emacs
#+end_src
+** [[https://github.com/Leinnan/i3gs][i3gs]]
+:PROPERTIES:
+:header-args+: :tangle ~/.config/i3gs/config
+:END:
+
+#+begin_src conf :comments none :tangle no
+borders_width=0 0 2 0
+separator_width=10
+
+#[mpd]
+#preset=MPD
+#title= ï
+#borders_color=#7FDBFF
+
+[ram]
+preset=RAM
+title= ï¾
+borders_color=#3D9970
+
+#[cpu]
+#preset=CPU
+#title= ï¤
+#borders_color=#2ECC40
+
+#[hdd]
+#preset=HDD
+#title= ï
+#borders_color=#01FF70
+
+[volume]
+command=volume-info
+title=ï§
+borders_color=#7FDBFF
+
+[battery]
+preset=BAT
+command=battery-percentage-time
+title= ï
+borders_color=#39CCCC
+
+[wifi]
+preset=WIFI
+title= ï«
+borders_color=#01FF70
+
+[date]
+preset=DATE
+command=date '+%-I:%M, %a %b %d '
+title= ï
+borders_color=#FFDC00
+separator_width=0
+#+end_src
+
+** i3status
+:PROPERTIES:
+:header-args+: :tangle ~/.config/i3status/config
+:END:
+
+#+begin_src conf :comments none
+# i3status configuration file.
+# see "man i3status" for documentation.
+
+# It is important that this file is edited as UTF-8.
+# The following line should contain a sharp s:
+# Ã
+# If the above line is not correctly displayed, fix your editor first!
+
+general {
+ colors = true
+ interval = 5
+ output_format = "i3bar"
+}
+
+# order += "ipv6"
+order += "disk /"
+order += "disk /data"
+order += "wireless _first_"
+order += "ethernet _first_"
+order += "battery 0"
+order += "volume master"
+order += "load"
+order += "tztime local"
+
+wireless _first_ {
+ format_up = "W:%quality %essid %ip"
+ format_down = "W: down"
+}
+
+ethernet _first_ {
+ # if you use %speed, i3status requires root privileges
+ format_up = "E: %ip (%speed)"
+ format_down = "E: down"
+}
+
+battery 0 {
+ format = "%status %percentage %remaining (%consumption)"
+ path = "/sys/class/power_supply/BAT%d/uevent"
+ low_threshold = "10"
+ threshold_type = "percentage"
+ last_full_capacity = true
+ integer_battery_capacity = true
+ hide_seconds = true
+}
+
+tztime local {
+ format = "%-I:%M%P %a %b %d"
+}
+
+volume master {
+ format = "⪠%volume"
+ format_muted = "ð %volume"
+ device = "pulse"
+}
+
+load {
+ format = "%1min"
+}
+
+disk "/" {
+ format = "/ %avail"
+}
+
+disk "/data" {
+ format = "/data %avail"
+}
+#+end_src
+
** isync
*** mbsyncrc
@@ -919,10 +1034,12 @@ gtk-font-name = Ubuntu 10
#+begin_src conf
# Global defaults
CopyArrivalDate yes
+Create Both
+Expunge Both
######
IMAPAccount amin
-Host nix.aminb.org
+Host mail.aminb.org
User amin@aminb.org
PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
SSLType IMAPS
@@ -930,17 +1047,20 @@ SSLType IMAPS
IMAPStore amin-remote
Account amin
-MaildirStore amin-local
-Path ~/mail/amin/
-Inbox ~/mail/amin/Inbox
-SubFolders Verbatim
+IMAPAccount amin-dovecot
+Host 127.0.0.1
+Port 143
+User amin@aminb.org
+PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin-dovecot.gpg"
+SSLType None
+
+IMAPStore amin-local
+Account amin-dovecot
Channel amin
Master :amin-remote:
Slave :amin-local:
-Patterns * !dovecot*
-Create Both
-SyncState *
+Patterns *
######
IMAPAccount uwaterloo
@@ -952,17 +1072,20 @@ SSLType IMAPS
IMAPStore uwaterloo-remote
Account uwaterloo
-MaildirStore uwaterloo-local
-Path ~/mail/uwaterloo/
-Inbox ~/mail/uwaterloo/Inbox
-SubFolders Verbatim
+IMAPAccount uwaterloo-dovecot
+Host 127.0.0.1
+Port 143
+User abandali@uwaterloo.ca
+PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo-dovecot.gpg"
+SSLType None
+
+IMAPStore uwaterloo-local
+Account uwaterloo-dovecot
Channel uwaterloo
Master :uwaterloo-remote:
Slave :uwaterloo-local:
-Patterns * !dovecot*
-Create Both
-SyncState *
+Patterns *
#+end_src
*** mbsync.service
@@ -999,6 +1122,42 @@ Unit=mbsync.service
WantedBy=timers.target
#+end_src
+** Latexmk
+:PROPERTIES:
+:header-args+: :tangle ~/.latexmkrc
+:END:
+
+#+begin_src conf
+$pdf_previewer = "start zathura %O %S";
+$clean_ext = "aux out";
+
+# $pdf_update_method = 4;
+# $pdf_update_command = "zathura %O %S";
+
+# Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
+# by Ctrl+click in the PDF.
+# Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
+# editor.
+# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
+#+end_src
+
+** libinput
+
+Improve XPS 15 9560's touchpad experience.
+
+# begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
+#+begin_src conf :tangle no
+Section "InputClass"
+ Identifier "libinput touchpad catchall"
+ Driver "libinput"
+ MatchIsTouchpad "on"
+ Option "ClickMethod" "clickfinger"
+ Option "NaturalScrolling" "true"
+ Option "Tapping" "on"
+ Option "TappingButtonMap" "lrm"
+EndSection
+#+end_src
+
** mpd
:PROPERTIES:
:header-args+: :tangle ~/.config/mpd/mpd.conf
@@ -1430,8 +1589,9 @@ logfile ~/.msmtp.log
# aminb
account aminb
-host nix.aminb.org
-tls_fingerprint BB:98:B3:02:83:B0:E0:C3:49:3E:C2:B2:A8:60:62:78:03:B3:5D:B3:BD:B8:0A:39:BB:E4:B0:66:D1:CF:D1:6B
+host mail.aminb.org
+# use `msmtp -a aminb --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
+tls_fingerprint C7:A4:2E:A3:11:FA:80:45:C4:29:D6:62:4D:73:DB:34:43:67:8F:16:F1:2E:54:43:06:1B:41:B6:A9:09:E0:37
tls_starttls on
from amin@aminb.org
user amin@aminb.org
@@ -1440,12 +1600,21 @@ passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
# gnu
account gnu
host fencepost.gnu.org
-tls_fingerprint 94:0E:37:EB:EA:44:5A:4B:B6:6F:16:3D:6C:7E:7E:44:2D:93:61:C1:FE:82:A8:29:5E:3C:12:4E:2D:BE:0E:2C
+# use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
+tls_fingerprint 93:59:52:1D:A6:95:13:31:7C:81:ED:DB:A5:BA:B5:2B:C8:BC:38:3E:71:A5:DF:8C:80:46:C1:E0:5D:2D:F4:E3
tls_starttls on
-from aminb@gnu.org
-user aminb
+from bandali@gnu.org
+user bandali
passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
+# gnu (old)
+account gnu-aminb : gnu
+from aminb@gnu.org
+account gnu-amin : gnu
+from amin@gnu.org
+account gnu-mab : gnu
+from mab@gnu.org
+
# uwaterloo
account uwaterloo
host connect.uwaterloo.ca
@@ -1455,10 +1624,6 @@ user abandali
passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
tls_trust_file /etc/ssl/certs/ca-certificates.crt
-# uwaterloo (friendly address)
-account uwaterloo-friendly : uwaterloo
-from amin.bandali@uwaterloo.ca
-
# Set a default account
account default : aminb
#+end_src
@@ -2061,7 +2226,7 @@ def_key "K"
# configured here named ".notmuch".
#
[database]
-path=/home/amin/mail
+path=/home/amin/oldmail
# User configuration
#
@@ -2081,7 +2246,7 @@ path=/home/amin/mail
[user]
name=Amin Bandali
primary_email=amin@aminb.org
-other_email=amin.bandali@uwaterloo.ca;mbandali@uwaterloo.ca;aminb@gnu.org;
+other_email=bandali@gnu.org;abandali@uwaterloo.ca;
# Configuration for "notmuch new"
#
@@ -2100,7 +2265,7 @@ other_email=amin.bandali@uwaterloo.ca;mbandali@uwaterloo.ca;aminb@gnu.org;
[new]
tags=new;
#tags=unread;inbox;
-ignore=.uidvalidity;.mbsyncstate
+ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
# Search configuration
#
@@ -2149,23 +2314,84 @@ synchronize_flags=true
gpg_path=gpg
#+end_src
+*** pre-new hook
+:PROPERTIES:
+:header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
+:END:
+
+#+begin_src sh
+touch /tmp/gnusieve.log
+sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
+ -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
+#+end_src
+
*** post-new hook
:PROPERTIES:
:header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
:END:
#+begin_src sh
-afew -tn
+# apply sent tag to messages sent by me
+notmuch tag -new +sent -- from:amin@aminb.org or from:bandali@gnu.org or from:aminb@gnu.org or from:amin@gnu.org or from:mab@gnu.org or from:abandali@uwaterloo.ca
+
+# initial tagging
+notmuch tag -latest -- tag:latest
+notmuch tag +inbox +unread +latest -new -- tag:new
+
# apply tags to lists
-notmuch tag +lists +lists/deepspec -- folder:amin/lists/deepspec
-notmuch tag +lists +lists/haskell-cafe -- folder:amin/lists/haskell-cafe
-notmuch tag +lists +lists/haskell-weekly -- folder:amin/lists/haskell-weekly
-notmuch tag +lists +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
-notmuch tag +lists +lists/notmuch -- folder:amin/lists/notmuch
-notmuch tag +lists +lists/info-gnu-emacs -- folder:amin/lists/info-gnu-emacs
-notmuch tag +lists +lists/help-gnu-emacs -- folder:amin/lists/help-gnu-emacs
-notmuch tag +lists +lists/emacs-devel -- folder:amin/lists/emacs-devel
+
+#
+notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
+notmuch tag -inbox +lists/haskell-weekly -- folder:amin/lists/haskell-weekly
+
+notmuch tag -inbox +pay -- folder:amin/pay
+notmuch tag -inbox +banking -- folder:amin/banking
+notmuch tag -inbox +work -- folder:amin/work
+#
+
+#
+notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
+notmuch tag -inbox +uw/cs846 -- folder:uwaterloo/lists/cs846
+notmuch tag -inbox +uw/ece750 -- folder:uwaterloo/lists/ece750
+notmuch tag -inbox +uw/se212 -- folder:uwaterloo/lists/se212
+notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
+
+notmuch tag -inbox +lists/alloytools -- folder:uwaterloo/lists/alloytools
+notmuch tag -inbox +lists/clvsingle -- folder:uwaterloo/lists/Clvsingle
+notmuch tag -inbox +lists/gsa -- folder:uwaterloo/lists/GSA
+notmuch tag -inbox +lists/math-grad -- folder:uwaterloo/lists/Math-grad
+notmuch tag -inbox +lists/scs-grads -- folder:uwaterloo/lists/scs-grads
+notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
+#
+
+#
+notmuch tag -inbox +l/emacs-devel -- folder:gnu/l/emacs-devel
+notmuch tag -inbox +l/emacs-orgmode -- folder:gnu/l/emacs-orgmode
+notmuch tag -inbox +l/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
+notmuch tag -inbox +l/fencepost-users -- folder:gnu/l/fencepost-users
+notmuch tag -inbox +l/guix-devel -- folder:gnu/l/guix-devel
+notmuch tag -inbox +l/guile-devel -- folder:gnu/l/guile-devel
+notmuch tag -inbox +l/help-gnu-emacs -- folder:gnu/l/help-gnu-emacs
+notmuch tag -inbox +l/info-gnu-emacs -- folder:gnu/l/info-gnu-emacs
+notmuch tag -inbox +l/www-commits -- folder:gnu/l/www-commits
+notmuch tag -inbox +l/www-discuss -- folder:gnu/l/www-discuss
+notmuch tag -inbox +webmasters -- folder:gnu/webmasters
+
+notmuch tag -inbox +l/deepspec -- folder:gnu/l/deepspec
+notmuch tag -inbox +l/haskell-cafe -- folder:gnu/l/haskell-cafe
+notmuch tag -inbox +l/haskell-art -- folder:gnu/l/haskell-art
+notmuch tag -inbox +l/notmuch -- folder:gnu/l/notmuch
+
+notmuch tag -inbox +l/~aminb/test-priv -- folder:gnu/l/~aminb/test-priv
+notmuch tag -inbox +l/~sircmpwn/sr.ht-admins -- folder:gnu/l/~sircmpwn/sr.ht-admins
+notmuch tag -inbox +l/~sircmpwn/sr.ht-announce -- folder:gnu/l/~sircmpwn/sr.ht-announce
+notmuch tag -inbox +l/~sircmpwn/sr.ht-dev -- folder:gnu/l/~sircmpwn/sr.ht-dev
+notmuch tag -inbox +l/~sircmpwn/sr.ht-discuss -- folder:gnu/l/~sircmpwn/sr.ht-discuss
+#
+
+notmuch tag -inbox -unread +archive/notmuch -- path:archive/notmuch/**
+notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**
#+end_src
*** notmuch.service
@@ -2296,6 +2522,69 @@ def prime_gpg_agent():
prime_gpg_agent()
#+end_src
+** pigeonhole
+*** gnu.sieve
+:PROPERTIES:
+:header-args+: :tangle ~/sieve/gnu.sieve :comments none
+:END:
+
+#+begin_src conf
+require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags", "include" ];
+
+if anyof (
+ address :is "from" "webmasters@gnu.org",
+ address :is "from" "webmasters-comment@gnu.org") {
+ fileinto :create "webmasters";
+ stop;
+}
+
+include :personal "lists";
+#+end_src
+
+*** lists.sieve
+:PROPERTIES:
+:header-args+: :tangle ~/sieve/lists.sieve :comments none
+:END:
+
+#+begin_src conf
+require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags",
+ "include" ];
+
+if anyof (
+ header :contains "list-id" "",
+ header :contains "list-id" "",
+ header :contains "list-id" "",
+ header :contains "list-id" "",
+ header :contains "list-id" "",
+ header :contains "list-id" "",
+ header :contains "list-id" "",
+ header :contains "list-id" "",
+ header :contains "list-id" "",
+ header :contains "list-id" "",
+ header :contains "list-id" "",
+ header :contains "list-id" "",
+ header :contains "list-id" "",
+ header :contains "list-id" "") {
+ if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
+ set :lower "listname" "${1}";
+ fileinto :create "l/${listname}";
+ }
+}
+
+if anyof (
+ header :contains "list-id" "<~aminb/test-priv@lists.sr.ht>",
+ header :contains "list-id" "<~sircmpwn/sr.ht-admins@lists.sr.ht>",
+ header :contains "list-id" "<~sircmpwn/sr.ht-announce@lists.sr.ht>",
+ header :contains "list-id" "<~sircmpwn/sr.ht-dev@lists.sr.ht>",
+ header :contains "list-id" "<~sircmpwn/sr.ht-discuss@lists.sr.ht>") {
+ if header :regex "list-id" "(~[a-z_0-9-]+)/([a-z_0-9.-]+)@" {
+ set :lower "username" "${1}";
+ set :lower "listname" "${2}";
+ fileinto :create "l/${username}/${listname}";
+ }
+}
+#+end_src
+
** polybar
*** config
@@ -3428,10 +3717,11 @@ adjustment-method=randr
:END:
#+begin_src conf
-rofi.font: Ubuntu Mono 13
+! rofi.font: Ubuntu Mono 13
! rofi.font: Inconsolata 16
! rofi.font: Iosevka 13
! rofi.font: Source Code Pro 11
+rofi.font: Source Code Pro 10.5
rofi.modi: run,window
! rofi.width: 640
rofi.width: 600
@@ -3459,7 +3749,7 @@ rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
# rofi command. Make sure to have "$@" as last argument
_rofi () {
#rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
- rofi -i -no-auto-select "$@"
+ rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
}
# xdotool needs the keyboard layout to be set using setxkbmap
@@ -3529,12 +3819,667 @@ switch="Alt+x"
insert_pass="Alt+n"
#+end_src
+** sway
+
+*** main
+:PROPERTIES:
+:header-args+: :tangle ~/.config/sway/config
+:END:
+
+#+begin_src conf
+### Variables
+# super
+set $mod Mod4
+# alt
+set $mod2 Mod1
+set $left h
+set $down j
+set $up k
+set $right l
+set $term urxvt
+set $menu rofi -show run -display-run '> ' -display-window ' ð '
+
+### Output configuration
+#
+# Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/)
+output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
+#
+# Example configuration:
+#
+# output HDMI-A-1 resolution 1920x1080 position 1920,0
+#
+# You can get the names of your outputs by running: swaymsg -t get_outputs
+
+### Idle configuration
+
+exec swayidle \
+ timeout 120 '[ -f ~/.nosleep ] || swaymsg "output * dpms off"' \
+ resume '[ -f ~/.nosleep ] || swaymsg "output * dpms on"' \
+ before-sleep swaylock
+
+
+### Key bindings
+#
+# Basics:
+#
+ # start a terminal
+ bindsym $mod+Return exec $term
+
+ # kill focused window
+ bindsym $mod+Shift+q kill
+
+ # start your launcher
+ bindsym $mod+d exec $menu
+
+ # password manager
+ bindsym $mod2+space exec rofi-pass
+
+ # Drag floating windows by holding down $mod and left mouse button.
+ # Resize them with right mouse button + $mod.
+ # Despite the name, also works for non-floating windows.
+ # Change normal to inverse to use left mouse button for resizing and right
+ # mouse button for dragging.
+ floating_modifier $mod normal
+
+ # reload the configuration file
+ bindsym $mod+Shift+c reload
+
+ # exit sway (logs you out of your wayland session)
+ bindsym $mod+Shift+e exit
+
+ bindsym $mod+apostrophe exec rofi-light # rofi-based brightness chooser
+ bindsym XF86MonBrightnessUp exec light -A 5 # increase screen brightness
+ bindsym XF86MonBrightnessDown exec light -U 5 # decrease screen brightness
+
+ bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
+ bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
+ bindsym XF86AudioMute exec pamixer --toggle-mute
+ bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
+
+ bindsym $mod+Shift+apostrophe exec rofi-remmina.py # choose remmina connection
+
+ # original sway workspace switch and window move
+ bindsym $mod+bracketleft workspace prev
+ bindsym $mod+bracketright workspace next
+ bindsym $mod+braceleft move container to workspace prev
+ bindsym $mod+braceright move container to workspace next
+
+ # bspwm-esque workspace switch and window move
+ bindsym $mod2+bracketleft exec sway-ws-util switch prev
+ bindsym $mod2+bracketright exec sway-ws-util switch next
+ bindsym $mod2+braceleft exec sway-ws-util move prev follow
+ bindsym $mod2+braceright exec sway-ws-util move next follow
+#
+# Moving around:
+#
+ # Move your focus around
+ bindsym $mod+$left focus left
+ bindsym $mod+$down focus down
+ bindsym $mod+$up focus up
+ bindsym $mod+$right focus right
+ # or use $mod+[up|down|left|right]
+ bindsym $mod+Left focus left
+ bindsym $mod+Down focus down
+ bindsym $mod+Up focus up
+ bindsym $mod+Right focus right
+
+ # _move_ the focused window with the same, but add Shift
+ bindsym $mod+Shift+$left move left
+ bindsym $mod+Shift+$down move down
+ bindsym $mod+Shift+$up move up
+ bindsym $mod+Shift+$right move right
+ # ditto, with arrow keys
+ bindsym $mod+Shift+Left move left
+ bindsym $mod+Shift+Down move down
+ bindsym $mod+Shift+Up move up
+ bindsym $mod+Shift+Right move right
+#
+# Workspaces:
+#
+ # switch to workspace
+ bindsym $mod+1 workspace 1
+ bindsym $mod+2 workspace 2
+ bindsym $mod+3 workspace 3
+ bindsym $mod+4 workspace 4
+ bindsym $mod+5 workspace 5
+ bindsym $mod+6 workspace 6
+ bindsym $mod+7 workspace 7
+ bindsym $mod+8 workspace 8
+ bindsym $mod+9 workspace 9
+ bindsym $mod+0 workspace 10
+ # move focused container to workspace
+ bindsym $mod+Shift+1 move container to workspace 1
+ bindsym $mod+Shift+2 move container to workspace 2
+ bindsym $mod+Shift+3 move container to workspace 3
+ bindsym $mod+Shift+4 move container to workspace 4
+ bindsym $mod+Shift+5 move container to workspace 5
+ bindsym $mod+Shift+6 move container to workspace 6
+ bindsym $mod+Shift+7 move container to workspace 7
+ bindsym $mod+Shift+8 move container to workspace 8
+ bindsym $mod+Shift+9 move container to workspace 9
+ bindsym $mod+Shift+0 move container to workspace 10
+ # Note: workspaces can have any name you want, not just numbers.
+ # We just use 1-10 as the default.
+#
+# Layout stuff:
+#
+ # You can "split" the current object of your focus with
+ # $mod+b or $mod+v, for horizontal and vertical splits
+ # respectively.
+ bindsym $mod+b splith
+ bindsym $mod+v splitv
+
+ # Switch the current container between different layout styles
+ bindsym $mod+s layout stacking
+ bindsym $mod+w layout tabbed
+ bindsym $mod+e layout toggle split
+
+ # Make the current focus fullscreen
+ bindsym $mod+f fullscreen
+
+ # Toggle the current focus between tiling and floating mode
+ bindsym $mod+Shift+space floating toggle
+
+ # Swap focus between the tiling area and the floating area
+ bindsym $mod+space focus mode_toggle
+
+ # move focus to the parent container
+ bindsym $mod+a focus parent
+#
+# Scratchpad:
+#
+ # Sway has a "scratchpad", which is a bag of holding for windows.
+ # You can send windows there and get them back later.
+
+ # Move the currently focused window to the scratchpad
+ bindsym $mod+Shift+minus move scratchpad
+
+ # Show the next scratchpad window or hide the focused scratchpad window.
+ # If there are multiple scratchpad windows, this command cycles through them.
+ bindsym $mod+minus scratchpad show
+#
+# Resizing containers:
+#
+mode "resize" {
+ # left will shrink the containers width
+ # right will grow the containers width
+ # up will shrink the containers height
+ # down will grow the containers height
+ bindsym $left resize shrink width 10px
+ bindsym $down resize grow height 10px
+ bindsym $up resize shrink height 10px
+ bindsym $right resize grow width 10px
+
+ # ditto, with arrow keys
+ bindsym Left resize shrink width 10px
+ bindsym Down resize grow height 10px
+ bindsym Up resize shrink height 10px
+ bindsym Right resize grow width 10px
+
+ # return to default mode
+ bindsym Return mode "default"
+ bindsym Escape mode "default"
+}
+bindsym $mod+Shift+r mode "resize"
+
+#
+# Power button
+#
+
+set $mode_system System (l)ock, (e)xit sway, (s)uspend, (h)ibernate, (r)eboot, (S)hutdown
+mode "$mode_system" {
+ bindsym l exec swaylock, mode "default"
+ bindsym e exec swaymsg exit, mode "default"
+ bindsym s exec systemctl suspend, mode "default"
+ bindsym h exec systemctl hibernate, mode "default"
+ bindsym r exec systemctl reboot, mode "default"
+ bindsym Shift+s exec systemctl poweroff -i, mode "default"
+
+ # back to normal: Enter, Escape, or q
+ bindsym Return mode "default"
+ bindsym Escape mode "default"
+ bindsym q mode "default"
+}
+bindsym XF86PowerOff mode "$mode_system"
+
+#
+# Presentation mode
+#
+
+bindsym $mod+$mod2+p exec ([ ! -e ~/.nosleep ] && touch ~/.nosleep || rm ~/.nosleep) && killall -USR1 i3status
+
+#
+# Notifications
+#
+
+bindsym $mod+Shift+n mode notifications
+mode notifications {
+ bindsym Return exec makoctl invoke; exec makoctl dismiss; mode default
+ bindsym d exec makoctl dismiss; mode default
+ bindsym Shift+d exec makoctl dismiss -a; mode default
+
+ bindsym Escape mode default
+ bindsym q mode default
+}
+
+#
+# Screenshotting
+#
+
+bindsym $mod+Shift+s mode screenshot
+mode screenshot {
+ bindsym a exec grim $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
+ bindsym r exec slurp | grim -g - $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
+
+ bindsym Escape mode default
+ bindsym q mode default
+}
+
+#
+# Status Bar:
+#
+# Read `man 5 sway-bar` for more information about this section.
+bar {
+ position bottom
+ colors {
+ statusline #ffffff
+ background #323232
+ inactive_workspace #32323200 #32323200 #5c5c5c
+ }
+ status_command i3status | my-i3status.py
+}
+
+# font pango: benis uushi 9
+# font pango: Ubuntu Mono 11
+# font pango: Inconsolata 11
+font pango: DejaVu Sans Mono 9
+# font pango: Liberation Mono 9
+
+exec xrdb .Xresources
+exec pgrep -x "systemd-inhibit" || \
+ systemd-inhibit --what=handle-power-key --who=aminb \
+ --why="Handle power button in sway" sleep infinity
+exec mako 2>&1 >/tmp/mako.log
+exec /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
+
+include /etc/sway/config.d/*
+include ~/.config/sway/`hostname`
+
+exec systemd-notify --ready || true
+
+#+end_src
+
+*** langa
+:PROPERTIES:
+:header-args+: :tangle ~/.config/sway/langa
+:END:
+
+#+begin_src conf
+input "2:7:SynPS/2_Synaptics_TouchPad" {
+ events disabled
+ dwt enabled
+ tap enabled
+ natural_scroll enabled
+ click_method clickfinger
+}
+
+input "1:1:AT_Translated_Set_2_keyboard" {
+ repeat_delay 200
+ repeat_rate 45
+ xkb_layout us_ab,ir
+ xkb_options ctrl:nocaps,altwin:swap_alt_win,grp:shifts_toggle
+}
+#+end_src
+
+*** shemshak
+:PROPERTIES:
+:header-args+: :tangle ~/.config/sway/shemshak
+:END:
+
+#+begin_src conf
+input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
+ dwt enabled
+ tap enabled
+ natural_scroll enabled
+ middle_emulation enabled
+ click_method clickfinger
+}
+
+input "1:1:AT_Translated_Set_2_keyboard" {
+ repeat_delay 200
+ repeat_rate 45
+ xkb_layout us,ir
+ xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
+}
+#+end_src
+** swaylock
+:PROPERTIES:
+:header-args+: :tangle ~/.config/swaylock/config
+:END:
+
+#+begin_src conf
+image=/home/amin/usr/pics/wp/wp2445784-blurred-wallpapers.jpg
+scaling=fill
+#+end_src
+
** TLP
-*** TODO enigma
-*** plasma
+*** langa
-#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/default/tlp")
+#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "langa")) "/sudo::/etc/default/tlp")
+# ------------------------------------------------------------------------------
+# tlp - Parameters for power saving
+# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
+
+# Hint: some features are disabled by default, remove the leading # to enable
+# them.
+
+# Set to 0 to disable, 1 to enable TLP.
+TLP_ENABLE=1
+
+# Operation mode when no power supply can be detected: AC, BAT.
+# Concerns some desktop and embedded hardware only.
+TLP_DEFAULT_MODE=AC
+
+# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
+# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
+TLP_PERSISTENT_DEFAULT=0
+
+# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
+# Non-zero value enables, zero disables laptop mode.
+DISK_IDLE_SECS_ON_AC=0
+DISK_IDLE_SECS_ON_BAT=2
+
+# Dirty page values (timeouts in secs).
+MAX_LOST_WORK_SECS_ON_AC=15
+MAX_LOST_WORK_SECS_ON_BAT=60
+
+# Hint: CPU parameters below are disabled by default, remove the leading #
+# to enable them, otherwise kernel default values are used.
+
+# Select a CPU frequency scaling governor.
+# Intel Core i processor with intel_pstate driver:
+# powersave(*), performance.
+# Older hardware with acpi-cpufreq driver:
+# ondemand(*), powersave, performance, conservative, schedutil.
+# (*) is recommended.
+# Hint: use tlp-stat -p to show the active driver and available governors.
+# Important:
+# powersave for intel_pstate and ondemand for acpi-cpufreq are power
+# efficient for *almost all* workloads and therefore kernel and most
+# distributions have chosen them as defaults. If you still want to change,
+# you should know what you're doing! You *must* disable your distribution's
+# governor settings or conflicts will occur.
+#CPU_SCALING_GOVERNOR_ON_AC=powersave
+#CPU_SCALING_GOVERNOR_ON_BAT=powersave
+
+# Set the min/max frequency available for the scaling governor.
+# Possible values strongly depend on your CPU. For available frequencies see
+# the output of tlp-stat -p.
+#CPU_SCALING_MIN_FREQ_ON_AC=0
+#CPU_SCALING_MAX_FREQ_ON_AC=0
+#CPU_SCALING_MIN_FREQ_ON_BAT=0
+#CPU_SCALING_MAX_FREQ_ON_BAT=0
+
+# Set energy performance hints (HWP) for Intel P-state governor:
+# performance, balance_performance, default, balance_power, power
+# Values are given in order of increasing power saving.
+# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
+CPU_HWP_ON_AC=balance_performance
+CPU_HWP_ON_BAT=balance_power
+
+# Set Intel P-state performance: 0..100 (%).
+# Limit the max/min P-state to control the power dissipation of the CPU.
+# Values are stated as a percentage of the available performance.
+# Requires an Intel Core i processor with intel_pstate driver.
+#CPU_MIN_PERF_ON_AC=0
+#CPU_MAX_PERF_ON_AC=100
+#CPU_MIN_PERF_ON_BAT=0
+#CPU_MAX_PERF_ON_BAT=30
+
+# Set the CPU "turbo boost" feature: 0=disable, 1=allow
+# Requires an Intel Core i processor.
+# Important:
+# - This may conflict with your distribution's governor settings
+# - A value of 1 does *not* activate boosting, it just allows it
+#CPU_BOOST_ON_AC=1
+#CPU_BOOST_ON_BAT=0
+
+# Minimize number of used CPU cores/hyper-threads under light load conditions:
+# 0=disable, 1=enable.
+SCHED_POWERSAVE_ON_AC=0
+SCHED_POWERSAVE_ON_BAT=1
+
+# Kernel NMI Watchdog:
+# 0=disable (default, saves power), 1=enable (for kernel debugging only).
+NMI_WATCHDOG=0
+
+# Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
+# Frequency voltage pairs are written to:
+# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
+# CAUTION: only use this, if you thoroughly understand what you are doing!
+#PHC_CONTROLS="F:V F:V F:V F:V"
+
+# Set CPU performance versus energy savings policy:
+# performance, balance-performance, default, balance-power, power.
+# Values are given in order of increasing power saving.
+# Requires kernel module msr and x86_energy_perf_policy from linux-tools.
+ENERGY_PERF_POLICY_ON_AC=performance
+ENERGY_PERF_POLICY_ON_BAT=balance-power
+
+# Disk devices; separate multiple devices with spaces (default: sda).
+# Devices can be specified by disk ID also (lookup with: tlp diskid).
+DISK_DEVICES="sda sdb"
+
+# Disk advanced power management level: 1..254, 255 (max saving, min, off).
+# Levels 1..127 may spin down the disk; 255 allowable on most drives.
+# Separate values for multiple disks with spaces. Use the special value 'keep'
+# to keep the hardware default for the particular disk.
+DISK_APM_LEVEL_ON_AC="254 254"
+DISK_APM_LEVEL_ON_BAT="128 128"
+
+# Hard disk spin down timeout:
+# 0: spin down disabled
+# 1..240: timeouts from 5s to 20min (in units of 5s)
+# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
+# See 'man hdparm' for details.
+# Separate values for multiple disks with spaces. Use the special value 'keep'
+# to keep the hardware default for the particular disk.
+#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
+#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
+
+# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
+# Separate values for multiple disks with spaces. Use the special value 'keep'
+# to keep the kernel default scheduler for the particular disk.
+#DISK_IOSCHED="cfq cfq"
+
+# AHCI link power management (ALPM) for disk devices:
+# min_power, med_power_with_dipm(*), medium_power, max_performance.
+# (*) Kernel >= 4.15 required, then recommended.
+# Multiple values separated with spaces are tried sequentially until success.
+SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
+SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
+
+# Exclude host devices from AHCI link power management.
+# Separate multiple hosts with spaces.
+#SATA_LINKPWR_BLACKLIST="host1"
+
+# Runtime Power Management for AHCI host and disks devices:
+# on=disable, auto=enable.
+# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
+#AHCI_RUNTIME_PM_ON_AC=on
+#AHCI_RUNTIME_PM_ON_BAT=on
+
+# Seconds of inactivity before disk is suspended.
+AHCI_RUNTIME_PM_TIMEOUT=15
+
+# PCI Express Active State Power Management (PCIe ASPM):
+# default, performance, powersave.
+PCIE_ASPM_ON_AC=performance
+PCIE_ASPM_ON_BAT=powersave
+
+# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
+# auto = mid on BAT, high on AC; default = use hardware defaults.
+RADEON_POWER_PROFILE_ON_AC=high
+RADEON_POWER_PROFILE_ON_BAT=low
+
+# Radeon dynamic power management method (DPM): battery, performance.
+RADEON_DPM_STATE_ON_AC=performance
+RADEON_DPM_STATE_ON_BAT=battery
+
+# Radeon DPM performance level: auto, low, high; auto is recommended.
+RADEON_DPM_PERF_LEVEL_ON_AC=auto
+RADEON_DPM_PERF_LEVEL_ON_BAT=auto
+
+# WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
+WIFI_PWR_ON_AC=off
+WIFI_PWR_ON_BAT=on
+
+# Disable wake on LAN: Y/N.
+WOL_DISABLE=Y
+
+# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
+# A value of 0 disables, >=1 enables power saving (recommended: 1).
+SOUND_POWER_SAVE_ON_AC=0
+SOUND_POWER_SAVE_ON_BAT=0
+
+# Disable controller too (HDA only): Y/N.
+SOUND_POWER_SAVE_CONTROLLER=N
+
+# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
+# Drive can be powered on again by releasing (and reinserting) the eject lever
+# or by pressing the disc eject button on newer models.
+# Note: an UltraBay/MediaBay hard disk is never powered off.
+BAY_POWEROFF_ON_AC=0
+BAY_POWEROFF_ON_BAT=0
+# Optical drive device to power off (default sr0).
+BAY_DEVICE="sr0"
+
+# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
+RUNTIME_PM_ON_AC=on
+RUNTIME_PM_ON_BAT=auto
+
+# Exclude PCI(e) device adresses the following list from Runtime PM
+# (separate with spaces). Use lspci to get the adresses (1st column).
+#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
+
+# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
+# Default when unconfigured is "amdgpu nouveau nvidia radeon" which
+# prevents accidential power-on of dGPU in hybrid graphics setups.
+# Use "" to disable the feature completely.
+# Separate multiple drivers with spaces.
+#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
+
+# Set to 0 to disable, 1 to enable USB autosuspend feature.
+USB_AUTOSUSPEND=1
+
+# Exclude listed devices from USB autosuspend (separate with spaces).
+# Use lsusb to get the ids.
+# Note: input devices (usbhid) are excluded automatically
+#USB_BLACKLIST="1111:2222 3333:4444"
+
+# Bluetooth devices are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude.
+USB_BLACKLIST_BTUSB=0
+
+# Phone devices are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude (enable charging).
+USB_BLACKLIST_PHONE=0
+
+# Printers are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude.
+USB_BLACKLIST_PRINTER=1
+
+# WWAN devices are excluded from USB autosuspend:
+# 0=do not exclude, 1=exclude.
+USB_BLACKLIST_WWAN=1
+
+# Include listed devices into USB autosuspend even if already excluded
+# by the blacklists above (separate with spaces).
+# Use lsusb to get the ids.
+#USB_WHITELIST="1111:2222 3333:4444"
+
+# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
+# (workaround for USB devices that cause shutdown problems).
+#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
+
+# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
+# on system startup: 0=disable, 1=enable.
+# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
+# are ignored when this is enabled!
+#RESTORE_DEVICE_STATE_ON_STARTUP=0
+RESTORE_DEVICE_STATE_ON_STARTUP=0
+
+# Radio devices to disable on startup: bluetooth, wifi, wwan.
+# Separate multiple devices with spaces.
+#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
+DEVICES_TO_DISABLE_ON_STARTUP="bluetooth"
+
+# Radio devices to enable on startup: bluetooth, wifi, wwan.
+# Separate multiple devices with spaces.
+#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
+
+# Radio devices to disable on shutdown: bluetooth, wifi, wwan.
+# (workaround for devices that are blocking shutdown).
+#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
+
+# Radio devices to enable on shutdown: bluetooth, wifi, wwan.
+# (to prevent other operating systems from missing radios).
+#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
+
+# Radio devices to enable on AC: bluetooth, wifi, wwan.
+#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
+
+# Radio devices to disable on battery: bluetooth, wifi, wwan.
+#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
+
+# Radio devices to disable on battery when not in use (not connected):
+# bluetooth, wifi, wwan.
+#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
+
+# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
+# required). Charging starts when the remaining capacity falls below the
+# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
+# Main / Internal battery (values in %)
+#START_CHARGE_THRESH_BAT0=75
+#STOP_CHARGE_THRESH_BAT0=80
+# Ultrabay / Slice / Replaceable battery (values in %)
+#START_CHARGE_THRESH_BAT1=75
+#STOP_CHARGE_THRESH_BAT1=80
+
+# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
+#RESTORE_THRESHOLDS_ON_BAT=1
+
+# ------------------------------------------------------------------------------
+# tlp-rdw - Parameters for the radio device wizard
+# Possible devices: bluetooth, wifi, wwan.
+
+# Hints:
+# - Parameters are disabled by default, remove the leading # to enable them
+# - Separate multiple radio devices with spaces
+
+# Radio devices to disable on connect.
+#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
+#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
+#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
+
+# Radio devices to enable on disconnect.
+#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
+#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
+#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
+
+# Radio devices to enable/disable when docked.
+#DEVICES_TO_ENABLE_ON_DOCK=""
+#DEVICES_TO_DISABLE_ON_DOCK=""
+
+# Radio devices to enable/disable when undocked.
+#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
+#DEVICES_TO_DISABLE_ON_UNDOCK=""
+#+end_src
+
+*** shemshak
+
+#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "shemshak")) "/sudo::/etc/default/tlp")
# ------------------------------------------------------------------------------
# tlp - Parameters for power saving
# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
@@ -3856,8 +4801,9 @@ RESTORE_DEVICE_STATE_ON_STARTUP=1
contrary, it's automatically sourced by LightDM, my display manager of
choice.
-#+begin_src sh
+#+begin_src sh :tangle no
xset -b # disable bell
+xset r rate 200 45 # repeat delay (ms) and rate (repeats/sec)
# setxkbmap -option compose:ralt
@@ -3881,15 +4827,12 @@ source $HOME/.zprofile
export _JAVA_AWT_WM_NONREPARENTING=1
export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
-# unlock-def-gk.py &
-
if [ $(hostname) = "plasma" ]
then
- bspwm &
-elif [ $(hostname) = "enigma" ]
-then
- emacs -ib 0 &
+ unlock-def-gk.py &
fi
+
+bspwm &
#+end_src
*** X resources
@@ -4077,7 +5020,8 @@ Emacs.FontBackend: xft,x
! Emacs.font: Inconsolata:size=16
! Emacs.font: Inconsolata LGC:size=14
! Emacs.font: Source Code Pro Medium-10.5
-Emacs.font: Ubuntu Mono:size=16
+Emacs.font: Source Code Pro:size=14
+! Emacs.font: Ubuntu Mono:size=16
! Emacs.font: Iosevka:size=16
#+end_src
@@ -4088,10 +5032,10 @@ Emacs.font: Ubuntu Mono:size=16
#+begin_src conf-xdefaults
! Font
-URxvt.font: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
-URxvt.boldFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
-URxvt.italicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
-URxvt.bolditalicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
+URxvt.font: xft:source code pro:pixelsize=14:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
+URxvt.boldFont: xft:source code pro semibold:pixelsize=14:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
+URxvt.italicFont: xft:source code pro italic:pixelsize=14:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
+URxvt.bolditalicFont: xft:source code pro semibold italic:pixelsize=14:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
URxvt.xftAntialias: true
URxvt.letterSpace: 0
@@ -4110,8 +5054,6 @@ URxvt.keysym.Shift-Up: command:\033]720;1\007
URxvt.keysym.Shift-Down: command:\033]721;1\007
URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select
-URxvt.perl-ext: bidi
-URxvt.bidi.enabled: 1
URxvt.url-select.launcher: firefox
URxvt.url-select.underline: true
URxvt.keysym.M-u: perl:url-select:select_next
@@ -4213,14 +5155,26 @@ URxvt.color13: #AD7FA8
!URxvt.color6: #06989A
!URxvt.color14: #34E2E2
! orange (replaces cyan)
-*color6: #ce5c00
-*color14: #fcaf3e
+,*color6: #ce5c00
+,*color14: #fcaf3e
! White
URxvt.color7: #D3D7CF
URxvt.color15: #EEEEEC
#+end_src
+*** xkb us_ab keyboard layout
+
+#+begin_src conf :tangle "/sudo::/usr/share/X11/xkb/symbols/us_ab" :comments none
+default partial alphanumeric_keys
+xkb_symbols "us_ab" {
+ include "us(basic)"
+ name[Group1]= "English (US)(aminb)";
+
+ key