From: Amin Bandali Date: Sat, 26 Aug 2017 20:00:29 +0000 (-0400) Subject: Update tlp's configuration file X-Git-Url: https://git.shemshak.org/~bandali/configs/commitdiff_plain/9494231456fe472e24edd88d79b87c87aff5350a?ds=inline Update tlp's configuration file --- diff --git a/other/tlp/etc/default/tlp b/other/tlp/etc/default/tlp index 44638d2..9b411e3 100644 --- a/other/tlp/etc/default/tlp +++ b/other/tlp/etc/default/tlp @@ -1,5 +1,5 @@ # ------------------------------------------------------------------------------ -# tlp - Parameters for power save +# tlp - Parameters for power saving # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html # Hint: some features are disabled by default, remove the leading # to enable @@ -12,6 +12,10 @@ TLP_ENABLE=1 # Concerns some desktop and embedded hardware only. TLP_DEFAULT_MODE=AC +# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE +# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC +TLP_PERSISTENT_DEFAULT=0 + # Seconds laptop mode has to wait after the disk goes idle before doing a sync. # Non-zero value enables, zero disables laptop mode. DISK_IDLE_SECS_ON_AC=0 @@ -35,33 +39,40 @@ MAX_LOST_WORK_SECS_ON_BAT=60 # You *must* disable your distribution's governor settings or conflicts will # occur. ondemand is sufficient for *almost all* workloads, you should know # what you're doing! -#CPU_SCALING_GOVERNOR_ON_AC=powersave -#CPU_SCALING_GOVERNOR_ON_BAT=powersave +CPU_SCALING_GOVERNOR_ON_AC=performance +CPU_SCALING_GOVERNOR_ON_BAT=powersave # Set the min/max frequency available for the scaling governor. # Possible values strongly depend on your CPU. For available frequencies see # the output of tlp-stat -p. -#CPU_SCALING_MIN_FREQ_ON_AC=0 -#CPU_SCALING_MAX_FREQ_ON_AC=0 -#CPU_SCALING_MIN_FREQ_ON_BAT=0 -#CPU_SCALING_MAX_FREQ_ON_BAT=0 +CPU_SCALING_MIN_FREQ_ON_AC=800000 +CPU_SCALING_MAX_FREQ_ON_AC=3300000 +CPU_SCALING_MIN_FREQ_ON_BAT=800000 +CPU_SCALING_MAX_FREQ_ON_BAT=3300000 + +# Set energy performance hints (HWP) for Intel P-state governor: +# default, performance, balance_performance, balance_power, power +# Values are given in order of increasing power saving. +# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required. +CPU_HWP_ON_AC=balance_performance +CPU_HWP_ON_BAT=balance_power # Set Intel P-state performance: 0..100 (%) # Limit the max/min P-state to control the power dissipation of the CPU. # Values are stated as a percentage of the available performance. # Requires an Intel Core i processor with intel_pstate driver. -#CPU_MIN_PERF_ON_AC=0 -#CPU_MAX_PERF_ON_AC=100 -#CPU_MIN_PERF_ON_BAT=0 -#CPU_MAX_PERF_ON_BAT=30 +CPU_MIN_PERF_ON_AC=0 +CPU_MAX_PERF_ON_AC=100 +CPU_MIN_PERF_ON_BAT=0 +CPU_MAX_PERF_ON_BAT=100 # Set the CPU "turbo boost" feature: 0=disable, 1=allow # Requires an Intel Core i processor. # Important: # - This may conflict with your distribution's governor settings # - A value of 1 does *not* activate boosting, it just allows it -#CPU_BOOST_ON_AC=1 -#CPU_BOOST_ON_BAT=0 +CPU_BOOST_ON_AC=1 +CPU_BOOST_ON_BAT=1 # Minimize number of used CPU cores/hyper-threads under light load conditions SCHED_POWERSAVE_ON_AC=0 @@ -155,18 +166,18 @@ WIFI_PWR_ON_BAT=on WOL_DISABLE=Y # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs). -# A value of 0 disables, >=1 enables power save. +# A value of 0 disables, >=1 enables power saving. SOUND_POWER_SAVE_ON_AC=0 SOUND_POWER_SAVE_ON_BAT=1 # Disable controller too (HDA only): Y/N SOUND_POWER_SAVE_CONTROLLER=N -# Set to 1 to power off optical drive in UltraBay/MediaBay when running on -# battery. A value of 0 disables this feature (Default). +# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable. # Drive can be powered on again by releasing (and reinserting) the eject lever # or by pressing the disc eject button on newer models. # Note: an UltraBay/MediaBay hard disk is never powered off. +#BAY_POWEROFF_ON_AC=0 #BAY_POWEROFF_ON_BAT=0 # Optical drive device to power off (default sr0). #BAY_DEVICE="sr0" @@ -175,33 +186,39 @@ SOUND_POWER_SAVE_CONTROLLER=N RUNTIME_PM_ON_AC=on RUNTIME_PM_ON_BAT=auto -# Runtime PM for *all* PCI(e) bus devices, except blacklisted ones: -# 0=disable, 1=enable -RUNTIME_PM_ALL=1 - # Exclude PCI(e) device adresses the following list from Runtime PM # (separate with spaces). Use lspci to get the adresses (1st column). #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6" -# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM -# (should prevent accidential power on of hybrid graphics' discrete part). -# Default is "radeon nouveau"; use "" to disable the feature completely. +# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM. +# Default when unconfigured is "amdgpu nouveau nvidia radeon" which +# prevents accidential power-on of dGPU in hybrid graphics setups. +# Use "" to disable the feature completely. # Separate multiple drivers with spaces. -RUNTIME_PM_DRIVER_BLACKLIST="radeon nouveau" +#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon" # Set to 0 to disable, 1 to enable USB autosuspend feature. USB_AUTOSUSPEND=1 # Exclude listed devices from USB autosuspend (separate with spaces). # Use lsusb to get the ids. -# Note: input devices (usbhid) are excluded automatically (see below) +# Note: input devices (usbhid) are excluded automatically #USB_BLACKLIST="1111:2222 3333:4444" -# WWAN devices are excluded from USB autosuspend: 0=do not exclude / 1=exclude -#USB_BLACKLIST_WWAN=1 +# Bluetooth devices are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude +USB_BLACKLIST_BTUSB=0 + +# Phone devices are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude (enable charging) +USB_BLACKLIST_PHONE=0 + +# WWAN devices are excluded from USB autosuspend: +# 0=do not exclude, 1=exclude +USB_BLACKLIST_WWAN=1 # Include listed devices into USB autosuspend even if already excluded -# by the driver or WWAN blacklists above (separate with spaces). +# by the blacklists above (separate with spaces). # Use lsusb to get the ids. #USB_WHITELIST="1111:2222 3333:4444" @@ -251,6 +268,9 @@ RESTORE_DEVICE_STATE_ON_STARTUP=0 #START_CHARGE_THRESH_BAT1=75 #STOP_CHARGE_THRESH_BAT1=80 +# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable +#RESTORE_THRESHOLDS_ON_BAT=1 + # ------------------------------------------------------------------------------ # tlp-rdw - Parameters for the radio device wizard # Possible devices: bluetooth, wifi, wwan