git.shemshak.org - ~bandali/configs/blob - spacemacs/.spacemacs

   1 ;; -*- mode: dotspacemacs -*-
   2 ;; This file is loaded by Spacemacs at startup.
   3 ;; It must be stored in your home directory.
   4
   5 (defun dotspacemacs/layers ()
   6   "Configuration Layers declaration."
   7   (setq-default
   8    ;; List of additional paths where to look for configuration layers.
   9    ;; Paths must have a trailing slash (ie. `~/.mycontribs/')
  10    dotspacemacs-configuration-layer-path '()
  11    ;; List of configuration layers to load. If it is the symbol `all' instead
  12    ;; of a list then all discovered layers will be installed.
  13    dotspacemacs-configuration-layers
  14    '(
  15      ;; --------------------------------------------------------
  16      ;; Example of useful layers you may want to use right away
  17      ;; Uncomment a layer name and press C-c C-c to install it
  18      ;; --------------------------------------------------------
  19      auto-completion
  20      better-defaults
  21      (git :variables
  22           git-gutter-use-fringe t)
  23      markdown
  24      org
  25      syntax-checking
  26      mu4e
  27      evil
  28      c-c++
  29      auctex
  30      html
  31      clojure
  32      (haskell :variables '(haskell-enable-hindent-style "chris-done"
  33                                                         haskell-enable-shm-support t))
  34      emacs-lisp
  35      rust
  36      rust-lang
  37      shell
  38      themes-megapack
  39      )
  40    ;; A list of packages and/or extensions that will not be install and loaded.
  41    dotspacemacs-excluded-packages '()
  42    ;; If non-nil spacemacs will delete any orphan packages, i.e. packages that
  43    ;; are declared in a layer which is not a member of
  44    ;; the list `dotspacemacs-configuration-layers'
  45    dotspacemacs-delete-orphan-packages t))
  46
  47 (defun dotspacemacs/init ()
  48   "Initialization function.
  49 This function is called at the very startup of Spacemacs initialization
  50 before layers configuration."
  51   ;; This setq-default sexp is an exhaustive list of all the supported
  52   ;; spacemacs settings.
  53   (setq-default
  54    ;; Either `vim' or `emacs'. Evil is always enabled but if the variable
  55    ;; is `emacs' then the `holy-mode' is enabled at startup.
  56    dotspacemacs-editing-style 'vim
  57    ;; If non nil output loading progess in `*Messages*' buffer.
  58    dotspacemacs-verbose-loading nil
  59    ;; Specify the startup banner. Default value is `official', it displays
  60    ;; the official spacemacs logo. An integer value is the index of text
  61    ;; banner, `random' chooses a random text banner in `core/banners'
  62    ;; directory. A string value must be a path to a .PNG file.
  63    ;; If the value is nil then no banner is displayed.
  64    ;; dotspacemacs-startup-banner 'official
  65    dotspacemacs-startup-banner 'official
  66    ;; t if you always want to see the changelog at startup
  67    dotspacemacs-always-show-changelog nil
  68    ;; List of items to show in the startup buffer. If nil it is disabled.
  69    ;; Possible values are: `recents' `bookmarks' `projects'."
  70    dotspacemacs-startup-lists '(recents projects)
  71    ;; List of themes, the first of the list is loaded when spacemacs starts.
  72    ;; Press <SPC> T n to cycle to the next theme in the list (works great
  73    ;; with 2 themes variants, one dark and one light)
  74    ;; dotspacemacs-themes '(leuven sanityinc-tomorrow-night solarized-dark solarized-light)
  75    dotspacemacs-themes '(gotham)
  76    ;; If non nil the cursor color matches the state color.
  77    dotspacemacs-colorize-cursor-according-to-state t
  78    ;; Default font. `powerline-scale' allows to quickly tweak the mode-line
  79    ;; size to make separators look not too crappy.
  80    dotspacemacs-default-font '("Source Code Pro"
  81                                :size 14
  82                                :weight normal
  83                                :width normal
  84                                :powerline-scale 1.1)
  85    ;; The leader key
  86    dotspacemacs-leader-key "SPC"
  87    ;; The leader key accessible in `emacs state' and `insert state'
  88    dotspacemacs-emacs-leader-key "M-m"
  89    ;; Major mode leader key is a shortcut key which is the equivalent of
  90    ;; pressing `<leader> m`. Set it to `nil` to disable it.
  91    dotspacemacs-major-mode-leader-key ","
  92    ;; Major mode leader key accessible in `emacs state' and `insert state'
  93    dotspacemacs-major-mode-emacs-leader-key "C-M-m"
  94    ;; The command key used for Evil commands (ex-commands) and
  95    ;; Emacs commands (M-x).
  96    ;; By default the command key is `:' so ex-commands are executed like in Vim
  97    ;; with `:' and Emacs commands are executed with `<leader> :'.
  98    dotspacemacs-command-key ":"
  99    ;; If non nil the paste micro-state is enabled. While enabled pressing `p`
 100    ;; several times cycle between the kill ring content.
 101    dotspacemacs-enable-paste-micro-state t
 102    ;; Guide-key delay in seconds. The Guide-key is the popup buffer listing
 103    ;; the commands bound to the current keystrokes.
 104    dotspacemacs-guide-key-delay 0.4
 105    ;; If non nil a progress bar is displayed when spacemacs is loading. This
 106    ;; may increase the boot time on some systems and emacs builds, set it to
 107    ;; nil ;; to boost the loading time.
 108    dotspacemacs-loading-progress-bar t
 109    ;; If non nil the frame is fullscreen when Emacs starts up.
 110    ;; (Emacs 24.4+ only)
 111    dotspacemacs-fullscreen-at-startup nil
 112    ;; If non nil `spacemacs/toggle-fullscreen' will not use native fullscreen.
 113    ;; Use to disable fullscreen animations in OSX."
 114    dotspacemacs-fullscreen-use-non-native nil
 115    ;; If non nil the frame is maximized when Emacs starts up.
 116    ;; Takes effect only if `dotspacemacs-fullscreen-at-startup' is nil.
 117    ;; (Emacs 24.4+ only)
 118    dotspacemacs-maximized-at-startup nil
 119    ;; A value from the range (0..100), in increasing opacity, which describes
 120    ;; the transparency level of a frame when it's active or selected.
 121    ;; Transparency can be toggled through `toggle-transparency'.
 122    dotspacemacs-active-transparency 90
 123    ;; A value from the range (0..100), in increasing opacity, which describes
 124    ;; the transparency level of a frame when it's inactive or deselected.
 125    ;; Transparency can be toggled through `toggle-transparency'.
 126    dotspacemacs-inactive-transparency 90
 127    ;; If non nil unicode symbols are displayed in the mode line.
 128    dotspacemacs-mode-line-unicode-symbols t
 129    ;; If non nil smooth scrolling (native-scrolling) is enabled. Smooth
 130    ;; scrolling overrides the default behavior of Emacs which recenters the
 131    ;; point when it reaches the top or bottom of the screen.
 132    dotspacemacs-smooth-scrolling t
 133    ;; If non-nil smartparens-strict-mode will be enabled in programming modes.
 134    dotspacemacs-smartparens-strict-mode nil
 135    ;; If non nil advises quit functions to keep server open when quitting.
 136    dotspacemacs-persistent-server nil
 137    ;; The default package repository used if no explicit repository has been
 138    ;; specified with an installed package.
 139    ;; Not used for now.
 140    dotspacemacs-default-package-repository nil
 141    ;; Disable setting the cursor color according to states
 142    dotspacemacs-colorize-cursor-according-to-state nil
 143    )
 144   ;; User initialization goes here
 145   )
 146
 147 (defun dotspacemacs/config ()
 148   "Configuration function.
 149  This function is called at the very end of Spacemacs initialization after
 150 layers configuration."
 151   (setq powerline-default-separator nil)
 152   (setq TeX-PDF-mode t
 153         Tex-command-default 'TeX)
 154   (setq undo-tree-auto-save-history t
 155         undo-tree-history-directory-alist
 156         `(("." . ,(concat spacemacs-cache-directory "undo"))))
 157   (unless (file-exists-p (concat spacemacs-cache-directory "undo"))
 158     (make-directory (concat spacemacs-cache-directory "undo")))
 159
 160   (setq TeX-view-program-selection
 161         '(((output-dvi style-pstricks)
 162            "dvips and gv")
 163           (output-dvi "xdvi")
 164           (output-pdf "zathura")
 165           (output-html "xdg-open")))
 166
 167   (setq TeX-view-program-list
 168         '(("zathura"
 169            ("zathura" (mode-io-correlate "-sync.sh")
 170             " "
 171             (mode-io-correlate "%n:1:%t ")
 172             "%o"))))
 173
 174   (advice-add #'magit-key-mode-popup-committing :after
 175               (lambda ()
 176                 (magit-key-mode-toggle-option (quote committing) "--verbose")))
 177 )
 178
 179 ;; Do not write anything past this comment. This is where Emacs will
 180 ;; auto-generate custom variable definitions.
 181
 182
 183 (custom-set-variables
 184  ;; custom-set-variables was added by Custom.
 185  ;; If you edit it by hand, you could mess it up, so be careful.
 186  ;; Your init file should contain only one such instance.
 187  ;; If there is more than one, they won't work right.
 188  '(ac-ispell-requires 4)
 189  '(ahs-case-fold-search nil)
 190  '(ahs-default-range (quote ahs-range-whole-buffer))
 191  '(ahs-idle-interval 0.25)
 192  '(ahs-idle-timer 0 t)
 193  '(ahs-inhibit-face-list nil)
 194  '(ring-bell-function (quote ignore) t)
 195  '(send-mail-function (quote smtpmail-send-it)))
 196 (custom-set-faces
 197  ;; custom-set-faces was added by Custom.
 198  ;; If you edit it by hand, you could mess it up, so be careful.
 199  ;; Your init file should contain only one such instance.
 200  ;; If there is more than one, they won't work right.
 201  )