git.shemshak.org - ~bandali/configs/blob - rc.org

   1 #+title: rc.org
   2 #+property: header-args :comments link :mkdirp yes :results silent
   3
   4 * About
   5
   6 This org file contains the configuration files of pretty much every
   7 program I use. The files are tangled (i.e. exported, or derived) from
   8 this file using =org-babel=.
   9
  10 Note: This file is best viewed inside Emacs with org mode.
  11
  12 * Configs
  13
  14 This section contains the configuration files (dotfiles) of various
  15 programs I use.
  16
  17 ** bspwm
  18
  19 *** bspwmrc
  20 :PROPERTIES:
  21 :header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
  22 :END:
  23
  24 #+begin_src sh
  25 sxhkd &
  26 sh ~/.fehbg &
  27 xfce4-panel -d &
  28 compton &
  29 sleep 0.5 && pasystray --notify=all &
  30
  31 bspc monitor -d I II III IV V VI VII VIII IX X
  32 #bspc monitor eDP-1 -d I II III IV V
  33 #bspc monitor HDMI-1 -d VI VII VIII IX X
  34
  35 #bspc config border_width         2
  36 #bspc config window_gap           8
  37 bspc config window_gap           0
  38
  39 bspc config bottom_padding 26
  40
  41 bspc config split_ratio          0.52
  42 bspc config borderless_monocle   true
  43 bspc config gapless_monocle      true
  44 bspc config click_to_focus       button1
  45 bspc config directional_focus_tightness low
  46
  47 #bspc rule -a Firefox desktop='^1' follow=on
  48 bspc rule -a Nightly desktop='^1' follow=on
  49 bspc rule -a Emacs desktop='^2' state=tiled follow=on
  50 #bspc rule -a Chromium desktop='^4' follow=on
  51 bspc rule -a URxvt state=floating
  52 bspc rule -a URxvt:tiled state=tiled
  53 bspc rule -a Connman-gtk state=floating
  54 bspc rule -a Xfce4-panel state=floating
  55 bspc rule -a TelegramDesktop state=floating
  56 bspc rule -a Ec state=floating
  57 bspc rule -a Pavucontrol state=floating
  58 bspc rule -a Eog state=floating
  59 bspc rule -a Seahorse state=floating
  60 bspc rule -a mpv state=floating
  61 bspc rule -a Evince state=floating
  62 bspc rule -a Meld state=floating
  63 bspc rule -a Autokey-gtk state=floating
  64 bspc rule -a Mousepad state=floating
  65 bspc rule -a Wrapper-1.0 state=floating
  66 bspc rule -a File-roller state=floating
  67 bspc rule -a Gnome-disks state=floating
  68 bspc rule -a Termite state=floating
  69 bspc rule -a Termite:tiled state=tiled
  70 bspc rule -a Thunderbird:Calendar state=floating
  71 bspc rule -a Audacity state=floating
  72 bspc rule -a Proof state=floating # pvs x-show-proof
  73 bspc rule -a Nm-connection-editor state=floating
  74 bspc rule -a Wire state=floating
  75 bspc rule -a discord state=floating
  76 bspc rule -a X2goclient state=floating
  77 bspc rule -a SimpleScreenRecorder state=floating
  78 bspc rule -a Gimp state=floating
  79 bspc rule -a Wrapper-2.0 state=floating
  80 bspc rule -a Zathura state=tiled
  81 #+end_src
  82
  83 *** sxhkdrc
  84 :PROPERTIES:
  85 :header-args+: :tangle ~/.config/sxhkd/sxhkdrc
  86 :END:
  87
  88 #+begin_src conf
  89 #
  90 # wm independent hotkeys
  91 #
  92
  93 # terminal emulator
  94 super + {_,shift} + Return
  95         urxvt{_, -name tiled}
  96
  97 #super + {_,shift} + Return
  98 #       termite{_, --name=tiled}
  99
 100 # program launcher
 101 super + space
 102         rofi -show run -display-run '> ' -display-window ' 🗔 '
 103
 104 super + alt + space
 105         xfce4-popup-whiskermenu
 106
 107 # window finder
 108 super + backslash
 109         rofi -show window  -display-run '> ' -display-window ' 🗔 '
 110
 111 # password manager
 112 alt + space
 113         rofi-pass
 114
 115 # firefox
 116 #super + r
 117 #       firefox
 118
 119 # chromium
 120 #super + c
 121 #       chromium -incognito
 122
 123 # emacs
 124 super + e
 125         emacs
 126
 127 # make sxhkd reload its configuration files:
 128 super + Escape
 129         pkill -USR1 -x sxhkd
 130
 131 # volume {up,down}
 132 XF86Audio{Raise,Lower}Volume
 133         pamixer --allow-boost --{in,de}crease 5
 134
 135 # mute
 136 XF86AudioMute
 137         pamixer --toggle-mute
 138
 139 XF86AudioMicMute
 140         pactl set-source-mute 1 toggle
 141
 142 # playback control
 143 XF86Audio{Play,Prev,Next}
 144         mpc {toggle,prev,next}
 145
 146 # lock the screen
 147 super + shift + q
 148         light-locker-command -l
 149
 150 # Toggle keyboard layout
 151 super + F7
 152         toggle-layout
 153
 154 # Toggle Xfce presentation mode
 155 XF86LaunchB
 156         toggle-presentation-mode
 157
 158 # monitor brightness
 159 XF86MonBrightness{Up,Down}
 160         light -{A,U} 5
 161
 162 super + apostrophe
 163         rofi-light
 164
 165 # keyboard brightness
 166 #XF86KbdBrightness{Up,Down}
 167 #       kbdlight {up,down}
 168
 169 XF86RotateWindows
 170         toggle-tablet
 171
 172 #
 173 # bspwm hotkeys
 174 #
 175
 176 # quit bspwm normally
 177 super + alt + Escape
 178         bspc quit
 179
 180 # close and kill
 181 super + {w,q}
 182         bspc node -{c,k}
 183
 184 # alternate between the tiled and monocle layout
 185 super + m
 186         bspc desktop -l next
 187
 188 # send the newest marked node to the newest preselected node
 189 super + y
 190         bspc node newest.marked.local -n newest.!automatic.local
 191
 192 # swap the current node and the biggest node
 193 super + g
 194         bspc node -s biggest
 195
 196 #
 197 # state/flags
 198 #
 199
 200 # set the window state
 201 super + {t,shift + t,s,f}
 202         bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
 203
 204 # set the node flags
 205 super + ctrl + {m,x,y,z}
 206         bspc node -g {marked,locked,sticky,private}
 207
 208 #
 209 # focus/swap
 210 #
 211
 212 # focus the node in the given direction
 213 super + {_,shift + }{h,j,k,l}
 214         bspc node -{f,s} {west,south,north,east}
 215
 216 # focus the node for the given path jump
 217 super + {p,b,comma,period}
 218         bspc node -f @{parent,brother,first,second}
 219
 220 # focus the next/previous node in the current desktop
 221 super + {_,shift + }c
 222         bspc node -f {next,prev}.local
 223
 224 # focus the next/previous desktop in the current monitor
 225 super + bracket{left,right}
 226         bspc desktop -f {prev,next}.local
 227
 228 # send to next/prev desktop
 229 super + shift + bracket{left,right}
 230         bspc node -d {prev,next} --follow
 231
 232 # focus the last node/desktop
 233 super + {grave,Tab}
 234         bspc {node,desktop} -f last
 235
 236 # focus the older or newer node in the focus history
 237 super + {o,i}
 238         bspc wm -h off; \
 239         bspc node {older,newer} -f; \
 240         bspc wm -h on
 241
 242 # focus or send to the given desktop
 243 super + {_,shift + }{1-9,0}
 244         bspc {desktop -f,node -d} '^{1-9,10}'
 245
 246 #
 247 # preselect
 248 #
 249
 250 # preselect the direction
 251 super + ctrl + {h,j,k,l}
 252         bspc node -p {west,south,north,east}
 253
 254 # preselect the ratio
 255 super + ctrl + {1-9}
 256         bspc node -o 0.{1-9}
 257
 258 # cancel the preselection for the focused node
 259 super + ctrl + space
 260         bspc node -p cancel
 261
 262 # cancel the preselection for the focused desktop
 263 super + ctrl + shift + space
 264         bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
 265
 266 #
 267 # move/resize
 268 #
 269
 270 # expand a window by moving one of its side outward
 271 super + alt + {h,j,k,l}
 272         bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
 273
 274 # contract a window by moving one of its side inward
 275 super + alt + shift + {h,j,k,l}
 276         bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
 277
 278 # move a floating window
 279 super + {Left,Down,Up,Right}
 280         bspc node -v {-20 0,0 20,0 -20,20 0}
 281
 282 #alt + bracket{left,right}
 283 #       xdotool key --clearmodifiers ctrl+Page_{Up,Down}
 284 #+end_src
 285
 286 ** compton
 287 :PROPERTIES:
 288 :header-args+: :tangle ~/.config/compton.conf
 289 :END:
 290
 291 #+begin_src conf
 292 # Shadow
 293 shadow = false;                 # Enabled client-side shadows on windows.
 294 no-dock-shadow = true;          # Avoid drawing shadows on dock/panel windows.
 295 no-dnd-shadow = true;           # Don't draw shadows on DND windows.
 296 clear-shadow = true;            # Zero the part of the shadow's mask behind the
 297                                 # window. Fix some weirdness with ARGB windows.
 298 shadow-radius = 5;              # The blur radius for shadows. (default 12)
 299 shadow-offset-x = -5;           # The left offset for shadows. (default -15)
 300 shadow-offset-y = -5;           # The top offset for shadows. (default -15)
 301 # shadow-opacity = 0.7;         # The translucency for shadows. (default .75)
 302 # shadow-red = 0.0;             # Red color value of shadow. (0.0 - 1.0, defaults to 0)
 303 # shadow-green = 0.0;           # Green color value of shadow. (0.0 - 1.0, defaults to 0)
 304 # shadow-blue = 0.0;            # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
 305 shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ];    # Exclude conditions for shadows.
 306 # shadow-exclude = "n:e:Notification";
 307 #shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
 308 shadow-ignore-shaped = true;    # Avoid drawing shadow on all shaped windows
 309                                 # (see also: --detect-rounded-corners)
 310
 311 # Opacity
 312 menu-opacity = 1.0;                     # The opacity for menus. (default 1.0)
 313 #inactive-opacity = 0.9;                        # Default opacity of inactive windows. (0.0 - 1.0)
 314 # active-opacity = 0.8;                 # Default opacity for active windows. (0.0 - 1.0)
 315 frame-opacity = 1.0;                    # Opacity of window titlebars and borders. (0.1 - 1.0)
 316 # inactive-opacity-override = true;     # Let inactive opacity set by 'inactive-opacity' overrides
 317                                         # value of _NET_WM_OPACITY. Bad choice.
 318 alpha-step = 0.06;                      # XRender backend: Step size for alpha pictures. Increasing
 319                                         # it may result in less X resource usage,
 320                                         # Yet fading may look bad.
 321 #inactive-dim = 0.5;                    # Dim inactive windows. (0.0 - 1.0)
 322 #inactive-dim-fixed = true;             # Do not let dimness adjust based on window opacity.
 323 # blur-background = true;               # Blur background of transparent windows.
 324                                         # Bad performance with X Render backend.
 325                                         # GLX backend is preferred.
 326 # blur-background-frame = true;         # Blur background of opaque windows with transparent
 327                                         # frames as well.
 328 blur-background-fixed = true;           # Do not let blur radius adjust based on window opacity.
 329 blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
 330                                         # Exclude conditions for background blur.
 331
 332 # Fading
 333 fading = false;                 # Fade windows during opacity changes.
 334 fade-delta = 3;         # The time between steps in a fade in milliseconds. (default 10).
 335 fade-in-step = 0.03;            # Opacity change between steps while fading in. (default 0.028).
 336 fade-out-step = 0.03;           # Opacity change between steps while fading out. (default 0.03).
 337 # no-fading-openclose = true;   # Avoid fade windows in/out when opening/closing.
 338 fade-exclude = [ ];             # Exclude conditions for fading.
 339
 340 # Other
 341 backend = "glx"                 # Backend to use: "xrender" or "glx". GLX backend is typically
 342                                 # much faster but depends on a sane driver.
 343 mark-wmwin-focused = true;      # Try to detect WM windows and mark them as active.
 344 mark-ovredir-focused = true;    # Mark all non-WM but override-redirect windows active (e.g. menus).
 345 use-ewmh-active-win = true;     # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
 346                                 # instead of using FocusIn/Out events. Usually more reliable but
 347                                 # depends on a EWMH-compliant WM.
 348 detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
 349 detect-client-opacity = true;   # Detect _NET_WM_OPACITY on client windows, useful for window
 350                                 # managers not passing _NET_WM_OPACITY of client windows to frame
 351                                 # windows.
 352 refresh-rate = 0;               # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
 353 vsync = "drm";                  # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
 354                                 # See man page for more details.
 355 dbe = false;                    # Enable DBE painting mode. Rarely needed.
 356 paint-on-overlay = true;        # Painting on X Composite overlay window. Recommended.
 357 sw-opti = false;                # Limit compton to repaint at most once every 1 / refresh_rate.
 358                                 # Incompatible with certain VSync methods.
 359 unredir-if-possible = false;    # Unredirect all windows if a full-screen opaque window is
 360                                 # detected, to maximize performance for full-screen windows.
 361 focus-exclude = [ ];            # A list of conditions of windows that should always be considered
 362                                 # focused.
 363 detect-transient = true;        # Use WM_TRANSIENT_FOR to group windows, and consider windows in
 364                                 # the same group focused at the same time.
 365 detect-client-leader = true;    # Use WM_CLIENT_LEADER to group windows.
 366 invert-color-include = [ ];     # Conditions for windows to be painted with inverted color.
 367
 368 # GLX backend                   # GLX backend fine-tune options. See man page for more info.
 369 glx-no-stencil = true;          # Recommended.
 370 glx-copy-from-front = false;    # Useful with --glx-swap-method,
 371 # glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
 372 # glx-no-rebind-pixmap = true;  # Recommended if it works.
 373 glx-no-rebind-pixmap = true;    # Recommended if it works.
 374 #glx-swap-method = "4"; # See man page.
 375 glx-swap-method = "4";  # See man page.
 376
 377 # Window type settings
 378 wintypes:
 379 {
 380   tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
 381   menu = { shadow = false; };
 382   dropdown_menu = { shadow = false; };
 383   popup_menu =  { shadow = false; };
 384   utility =  { shadow = false; };
 385   # fade: Fade the particular type of windows.
 386   # shadow: Give those windows shadow
 387   # opacity: Default opacity for the type of windows.
 388   # focus: Whether to always consider windows of this type focused.
 389 };
 390 #+end_src
 391
 392 ** Dunst
 393 :PROPERTIES:
 394 :header-args+: :tangle ~/.config/dunst/dunstrc
 395 :END:
 396
 397 #+begin_src conf
 398 [global]
 399 #font = Ubuntu Mono 10.5
 400 font = Inconsolata 11
 401
 402 # Path to default icons.
 403 icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
 404
 405 icon_position = left
 406 # <b>bold</b>
 407 # <i>italic</i>
 408 # <s>strikethrough<s/>
 409 # <u>underline</u>
 410 markup = full
 411 # The format of the message. Possible variables are:
 412 #   %a  appname
 413 #   %s  summary
 414 #   %b  body
 415 #   %i  iconname (including its path)
 416 #   %I  iconname (without its path)
 417 #   %p  progress value if set ([  0%] to [100%]) or nothing
 418 # Markup is allowed
 419 format = "<b>%s</b>\n%b"
 420 # Sort messages by urgency
 421 sort = yes
 422 # Show how many messages are currently hidden (because of geometry)
 423 indicate_hiddenl= no
 424 # Alignment of message text.
 425 # Possible values are "left", "center" and "right"
 426 alignment = center
 427 # The frequency with wich text that is longer than the notification
 428 # window allows bounces back and forth.
 429 # This option conflicts with 'word_wrap'.
 430 # Set to 0 to disable
 431 bounce_freq = 3
 432 # show age of message if message is older than show_age_threshold seconds.
 433 # set to -1 to disable
 434 show_age_threshold = -1
 435 # split notifications into multiple lines if they don't fit into geometry
 436 word_wrap = yes
 437 # ignore newlines '\n' in notifications
 438 ignore_newline = no
 439 # The geometry of the message window.
 440 # geometry [{width}]x{height}][+/-{x}+/-{y}]
 441 # The height is measured in number of notifications everything else in pixels. If the width
 442 # is omitted but the height is given ("-geometry x2"), the message window
 443 # expands over the whole screen (dmenu-like). If width is 0,
 444 # the window expands to the longest message displayed.
 445 # A positive x is measured from the left, a negative from the
 446 # right side of the screen.  Y is measured from the top and down respectevly.
 447 # The width can be negative. In this case the actual width is the
 448 # screen width minus the width defined in within the geometry option.
 449 #geometry = "410x12-12+12"
 450 #geometry = "0x0-30-30"
 451 geometry = "260x12-30-30"
 452 # The transparency of the window. range: [0; 100]
 453 # This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
 454 transparency = 0
 455 # Don't remove messages, if the user is idle (no mouse or keyboard input)
 456 # for longer than idle_threshold seconds.
 457 # Set to 0 to disable.
 458 idle_threshold = 120
 459 # Which monitor should the notifications be displayed on.
 460 monitor = 0
 461 # Display notification on focused monitor. Possible modes are:
 462 # mouse: follow mouse pointer
 463 # keyboard: follow window with keyboard focus
 464 # none: don't follow anything
 465 #
 466 # "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
 467 # This should be the case for almost all modern windowmanagers.
 468 #
 469 # If this option is set to mouse or keyboard, the monitor option will be
 470 # ignored.
 471 follow = keyboard
 472 # should a notification popped up from history be sticky or
 473 # timeout as if it would normally do.
 474 sticky_history = yes
 475 # The height of a single line. If the height is smaller than the font height,
 476 # it will get raised to the font height.
 477 # This adds empty space above and under the text.
 478 line_height = 0
 479
 480 show_indicators = yes
 481
 482 # Draw a line of 'separatpr_height' pixel height between two notifications.
 483 # Set to 0 to disable
 484 separator_height = 3
 485 # padding between text and separator
 486 padding = 8
 487 # horizontal padding
 488 horizontal_padding = 8
 489 # Define a color for the separator.
 490 # possible values are:
 491 #  * auto: dunst tries to find a color fitting to the background
 492 #  * foreground: use the same color as the foreground
 493 #  * frame: use the same color as the frame.
 494 #  * anything else will be interpreted as a X color
 495 separator_color = foreground
 496 # print a notification on startup
 497 # This is mainly for error detection, since dbus (re-)starts dunst
 498 # automatically after a crash.
 499 startup_notification = false
 500 # dmenu path
 501 #dmenu = /usr/bin/dmenu -p dunst:
 502 dmenu = /usr/bin/rofi -dmenu -p dunst:
 503 # browser for opening urls in context menu
 504 browser = /usr/bin/firefox -new-tab
 505 [frame]
 506 width = 0
 507 color = "#377222"
 508 [shortcuts]
 509 # shortcuts are specified as [modifier+][modifier+]...key
 510 # available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
 511 # and 'mod4' (windows-key)
 512 # xev might be helpful to find names for keys
 513 # close notification
 514 close = ctrl+space
 515 # close all notifications
 516 close_all = ctrl+shift+space
 517 # redisplay last message(s)
 518 # On the US keyboard layout 'grave' is normally above TAB and left of '1'.
 519 history = ctrl+shift+h
 520 # context menu
 521 context = ctrl+shift+period
 522 [urgency_low]
 523 # IMPORTANT: colors have to be defined in quotation marks.
 524 # Otherwise the '#' and following  would be interpreted as a comment.
 525 background = "#1d2a30"
 526 foreground = "#71c2af"
 527 timeout = 3
 528 [urgency_normal]
 529 background = "#1d2a30"
 530 foreground = "#71c2af"
 531 timeout = 0
 532 [urgency_critical]
 533 background = "#1d2a30"
 534 foreground = "#ff9982"
 535 timeout = 0
 536
 537 # Every section that isn't one of the above is interpreted as a rules
 538 # to override settings for certain messages.
 539 # Messages can be matched by 'appname', 'summary', 'body' or 'icon'
 540 # and you can override the 'timeout', 'urgency', 'foreground', 'background'
 541 # and 'format'.
 542 # Shell-like globbing will get expanded.
 543 #
 544 # SCRIPTING
 545 # you can specify a script that gets run when the rule matches by setting
 546 # the 'script' option.
 547 # The script will be called as follows:
 548 # script appname summary body icon urgency
 549 # where urgency can be "LOW", "NORMAL" or "CRITICAL".
 550 #
 551 # NOTE: if you don't want a notification to be displayed, set the format to ""
 552 # NOTE: It might be helpful to run dunst -print in a terminal in order to find
 553 # fitting options for rules.
 554 #[espeak]
 555 #    summary = "*"
 556 #    script = dunst_espeak.sh
 557 #[script-test]
 558 #    summary = "*script*"
 559 #    script = dunst_test.sh
 560 #[ignore]
 561 ## This notification will not be displayed
 562 #    summary = "foobar"
 563 #    format = ""
 564 #[signed_on]
 565 #    appname = Pidgin
 566 #    summary = "*signed on*"
 567 #    urgency = low
 568 #
 569 #[signed_off]
 570 #    appname = Pidgin
 571 #    summary = *signed off*
 572 #    urgency = low
 573 #
 574 #[says]
 575 #    appname = Pidgin
 576 #    summary = *says*
 577 #    urgency = critical
 578 #
 579 #[twitter]
 580 #    appname = Pidgin
 581 #    summary = *twitter.com*
 582 #    urgency = normal
 583 #
 584 [xfpm-backlight]
 585     summary = *Brightness*
 586     urgency = low
 587 #+end_src
 588
 589 ** Fontconfig
 590 :PROPERTIES:
 591 :header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
 592 :END:
 593
 594 #+begin_src xml
 595 <?xml version="1.0"?>
 596 <!DOCTYPE fontconfig SYSTEM "fonts.dtd">
 597 <fontconfig>
 598  <match target="font">
 599   <edit mode="assign" name="rgba">
 600    <const>rgb</const>
 601   </edit>
 602  </match>
 603  <match target="font">
 604   <edit mode="assign" name="hinting">
 605    <bool>true</bool>
 606   </edit>
 607  </match>
 608  <match target="font">
 609   <edit mode="assign" name="hintstyle">
 610    <const>hintslight</const>
 611   </edit>
 612  </match>
 613  <match target="font">
 614   <edit mode="assign" name="antialias">
 615    <bool>true</bool>
 616   </edit>
 617  </match>
 618  <match target="font">
 619   <edit mode="assign" name="lcdfilter">
 620    <const>lcddefault</const>
 621   </edit>
 622  </match>
 623  <dir>~/.fonts</dir>
 624
 625  <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
 626  <alias binding="same">
 627   <family>Helvetica</family>
 628   <accept>
 629    <family>Liberation Sans</family>
 630   </accept>
 631 </alias>
 632 </fontconfig>
 633 #+end_src
 634
 635 ** Git
 636
 637 *** gitconfig
 638 :PROPERTIES:
 639 :header-args+: :tangle ~/.gitconfig
 640 :END:
 641
 642 **** user
 643 #+begin_src conf
 644 [user]
 645     name = Amin Bandali
 646     email = amin@aminb.org
 647     # signingkey = 4E05246AB0BF7FFB
 648 #+end_src
 649
 650 **** signing
 651 #+begin_src conf
 652 # [commit]
 653 #     gpgsign = true
 654 # [format]
 655 #     signoff = true
 656 #+end_src
 657
 658 **** core
 659 #+begin_src conf
 660 [core]
 661     autocrlf = input  # CRLF -> LF on commit
 662     editor = emacsclient -t
 663     excludesfile = ~/.gitignore_global
 664     pager = "less"
 665 #+end_src
 666
 667 **** gpg
 668 #+begin_src conf
 669 [gpg]
 670     program = gpg2
 671 #+end_src
 672
 673 **** alias
 674 #+begin_src conf
 675 [alias]
 676     git = !exec git  # handle nested git calls, e.g. git git status
 677     aliases = config --get-regexp '^alias\\.'
 678     a = add
 679     s = status
 680     sl = status --long
 681     c = checkout
 682     cb = checkout -b
 683     b = branch
 684     r = rebase
 685     p = pull
 686     pr = pull --rebase
 687     ps = push
 688     psf = push --force
 689 #+end_src
 690
 691 **** color
 692 #+begin_src conf
 693 [color]
 694     ui = auto
 695 [color "status"]
 696     added = green bold
 697     changed = red bold
 698     untracked = red bold
 699 [color "branch"]
 700     current = green bold
 701     remote = magenta bold
 702 [color "diff"]
 703     new = green bold
 704     old = red bold
 705 #+end_src
 706
 707 **** status
 708 #+begin_src conf
 709 [status]
 710     # showUntrackedFiles = all
 711     short=true
 712     branch=true
 713 #+end_src
 714
 715 **** github
 716 #+begin_src conf
 717 [github]
 718         user = aminb
 719 #+end_src
 720
 721 *** gitignore
 722 :PROPERTIES:
 723 :header-args+: :tangle ~/.gitignore_global
 724 :END:
 725
 726 #+begin_src conf
 727 *.orig
 728 *.py[co]
 729 *.sublime-workspace
 730 *~
 731 .DS_Store
 732 *.elc
 733 *-autoloads.el
 734 #+end_src
 735
 736 ** Latexmk
 737 :PROPERTIES:
 738 :header-args+: :tangle ~/.latexmkrc
 739 :END:
 740
 741 #+begin_src conf
 742 $pdf_previewer = "start zathura %O %S";
 743 $clean_ext = "aux out";
 744
 745 # $pdf_update_method = 4;
 746 # $pdf_update_command = "zathura %O %S";
 747
 748 # Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
 749 # by Ctrl+click in the PDF.
 750 # Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
 751 # editor.
 752 # $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
 753 #+end_src
 754
 755 ** libinput
 756
 757 Improve XPS 15 9560's touchpad experience.
 758
 759 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
 760 Section "InputClass"
 761     Identifier "libinput touchpad catchall"
 762     Driver "libinput"
 763     MatchIsTouchpad "on"
 764     Option "ClickMethod" "clickfinger"
 765     Option "NaturalScrolling" "true"
 766     Option "Tapping" "on"
 767     Option "TappingButtonMap" "lrm"
 768 EndSection
 769 #+end_src
 770
 771 ** getmail
 772
 773 *** getmailrc
 774 :PROPERTIES:
 775 :header-args+: :tangle ~/.getmail/getmailrc
 776 :END:
 777
 778 #+begin_src conf
 779 [retriever]
 780 type = SimplePOP3SSLRetriever
 781 server = fencepost.gnu.org
 782 username = aminb
 783 password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
 784 port = 995
 785 use_apop = True
 786
 787 [destination]
 788 type = Maildir
 789 path = ~/mail/gnu/Inbox/
 790
 791 [options]
 792 delete = True
 793 #+end_src
 794
 795 *** getmail.service
 796 :PROPERTIES:
 797 :header-args+: :tangle ~/.config/systemd/user/getmail.service
 798 :END:
 799
 800 #+begin_src conf :tangle no
 801 [Unit]
 802 Description=getmail service
 803
 804 [Service]
 805 Type=oneshot
 806 ExecStart=/usr/bin/getmail
 807 StandardOutput=syslog
 808 StandardError=syslog
 809 #+end_src
 810
 811 *** getmail.timer
 812 :PROPERTIES:
 813 :header-args+: :tangle ~/.config/systemd/user/getmail.timer
 814 :END:
 815
 816 #+begin_src conf :tangle no
 817 [Unit]
 818 Description=getmail timer
 819
 820 [Timer]
 821 OnCalendar=*:0/30
 822 Persistent=true
 823 Unit=getmail.service
 824
 825 [Install]
 826 WantedBy=timers.target
 827 #+end_src
 828
 829 ** GnuPG
 830 :PROPERTIES:
 831 :header-args+: :tangle ~/.gnupg/gpg-agent.conf
 832 :END:
 833
 834 #+begin_src conf
 835 default-cache-ttl 43200
 836 max-cache-ttl 43200
 837
 838 default-cache-ttl-ssh 10800
 839 max-cache-ttl-ssh 10800
 840
 841 # pinentry-program /usr/bin/pinentry-qt
 842 #+end_src
 843
 844 ** GTK
 845
 846 *** gtk-2.0
 847 :PROPERTIES:
 848 :header-args+: :tangle ~/.gtkrc-2.0
 849 :END:
 850
 851 #+begin_src conf
 852 gtk-theme-name="Greybird"
 853 gtk-icon-theme-name="Paper"
 854 gtk-font-name="Ubuntu 10"
 855 gtk-menu-images=0
 856 # gtk-key-theme-name = "Emacs"
 857 #+end_src
 858
 859 *** gtk-3.0
 860 :PROPERTIES:
 861 :header-args+: :tangle ~/.config/gtk-3.0/settings.ini
 862 :END:
 863
 864 #+begin_src conf :tangle no
 865 [Settings]
 866 gtk-icon-theme-name = Paper
 867 # gtk-theme-name = Adwaita
 868
 869 gtk-theme-name = Greybird
 870 # gtk-theme-name = Arc-Darker
 871 # gtk-theme-name = Numix-ArchBlue
 872
 873 gtk-font-name = Ubuntu 10
 874 # gtk-key-theme-name = Emacs
 875 #+end_src
 876
 877 ** isync
 878
 879 *** mbsyncrc
 880 :PROPERTIES:
 881 :header-args+: :tangle ~/.mbsyncrc
 882 :END:
 883
 884 #+begin_src conf
 885 # Global defaults
 886 CopyArrivalDate yes
 887
 888 ######
 889 IMAPAccount amin
 890 Host nix.aminb.org
 891 User amin@aminb.org
 892 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
 893 SSLType IMAPS
 894
 895 IMAPStore amin-remote
 896 Account amin
 897
 898 MaildirStore amin-local
 899 Path ~/mail/amin/
 900 Inbox ~/mail/amin/Inbox
 901 SubFolders Verbatim
 902
 903 Channel amin
 904 Master :amin-remote:
 905 Slave :amin-local:
 906 Patterns * !dovecot*
 907 Create Both
 908 SyncState *
 909
 910 ######
 911 IMAPAccount uwaterloo
 912 Host connect.uwaterloo.ca
 913 User abandali
 914 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
 915 SSLType IMAPS
 916
 917 IMAPStore uwaterloo-remote
 918 Account uwaterloo
 919
 920 MaildirStore uwaterloo-local
 921 Path ~/mail/uwaterloo/
 922 Inbox ~/mail/uwaterloo/Inbox
 923 SubFolders Verbatim
 924
 925 Channel uwaterloo
 926 Master :uwaterloo-remote:
 927 Slave :uwaterloo-local:
 928 Patterns * !dovecot*
 929 Create Both
 930 SyncState *
 931 #+end_src
 932
 933 *** mbsync.service
 934 :PROPERTIES:
 935 :header-args+: :tangle ~/.config/systemd/user/mbsync.service
 936 :END:
 937
 938 #+begin_src conf :tangle no
 939 [Unit]
 940 Description=mbsync service
 941
 942 [Service]
 943 Type=oneshot
 944 ExecStart=/usr/bin/mbsync -Va
 945 StandardOutput=syslog
 946 StandardError=syslog
 947 #+end_src
 948
 949 *** mbsync.timer
 950 :PROPERTIES:
 951 :header-args+: :tangle ~/.config/systemd/user/mbsync.timer
 952 :END:
 953
 954 #+begin_src conf :tangle no
 955 [Unit]
 956 Description=mbsync timer
 957
 958 [Timer]
 959 OnCalendar=*:0/15
 960 Persistent=true
 961 Unit=mbsync.service
 962
 963 [Install]
 964 WantedBy=timers.target
 965 #+end_src
 966
 967 ** mpd
 968 :PROPERTIES:
 969 :header-args+: :tangle ~/.config/mpd/mpd.conf
 970 :END:
 971
 972 #+begin_src conf
 973 # An example configuration file for MPD.
 974 # Read the user manual for documentation: http://www.musicpd.org/doc/user/
 975
 976
 977 # Files and directories #######################################################
 978 #
 979 # This setting controls the top directory which MPD will search to discover the
 980 # available audio files and add them to the daemon's online database. This
 981 # setting defaults to the XDG directory, otherwise the music directory will be
 982 # be disabled and audio files will only be accepted over ipc socket (using
 983 # file:// protocol) or streaming files over an accepted protocol.
 984 #
 985 music_directory         "~/usr/music"
 986 #
 987 # This setting sets the MPD internal playlist directory. The purpose of this
 988 # directory is storage for playlists created by MPD. The server will use
 989 # playlist files not created by the server but only if they are in the MPD
 990 # format. This setting defaults to playlist saving being disabled.
 991 #
 992 playlist_directory              "~/.mpd/playlists"
 993 #
 994 # This setting sets the location of the MPD database. This file is used to
 995 # load the database at server start up and store the database while the
 996 # server is not up. This setting defaults to disabled which will allow
 997 # MPD to accept files over ipc socket (using file:// protocol) or streaming
 998 # files over an accepted protocol.
 999 #
1000 db_file                 "~/.mpd/database"
1001 #
1002 # These settings are the locations for the daemon log files for the daemon.
1003 # These logs are great for troubleshooting, depending on your log_level
1004 # settings.
1005 #
1006 # The special value "syslog" makes MPD use the local syslog daemon. This
1007 # setting defaults to logging to syslog, otherwise logging is disabled.
1008 #
1009 log_file                        "~/.mpd/log"
1010 #
1011 # This setting sets the location of the file which stores the process ID
1012 # for use of mpd --kill and some init scripts. This setting is disabled by
1013 # default and the pid file will not be stored.
1014 #
1015 pid_file                        "~/.mpd/pid"
1016 #
1017 # This setting sets the location of the file which contains information about
1018 # most variables to get MPD back into the same general shape it was in before
1019 # it was brought down. This setting is disabled by default and the server
1020 # state will be reset on server start up.
1021 #
1022 state_file                      "~/.mpd/state"
1023 #
1024 # The location of the sticker database.  This is a database which
1025 # manages dynamic information attached to songs.
1026 #
1027 sticker_file                    "~/.mpd/sticker.sql"
1028 #
1029 ###############################################################################
1030
1031
1032 # General music daemon options ################################################
1033 #
1034 # This setting specifies the user that MPD will run as. MPD should never run as
1035 # root and you may use this setting to make MPD change its user ID after
1036 # initialization. This setting is disabled by default and MPD is run as the
1037 # current user.
1038 #
1039 #user                           "nobody"
1040 #
1041 # This setting specifies the group that MPD will run as. If not specified
1042 # primary group of user specified with "user" setting will be used (if set).
1043 # This is useful if MPD needs to be a member of group such as "audio" to
1044 # have permission to use sound card.
1045 #
1046 #group                          "nogroup"
1047 #
1048 # This setting sets the address for the daemon to listen on. Careful attention
1049 # should be paid if this is assigned to anything other then the default, any.
1050 # This setting can deny access to control of the daemon. Not effective if
1051 # systemd socket activiation is in use.
1052 #
1053 # For network
1054 #bind_to_address                "any"
1055 #
1056 # And for Unix Socket
1057 #bind_to_address                "~/.mpd/socket"
1058 #
1059 # This setting is the TCP port that is desired for the daemon to get assigned
1060 # to.
1061 #
1062 #port                           "6600"
1063 #
1064 # This setting controls the type of information which is logged. Available
1065 # setting arguments are "default", "secure" or "verbose". The "verbose" setting
1066 # argument is recommended for troubleshooting, though can quickly stretch
1067 # available resources on limited hardware storage.
1068 #
1069 #log_level                      "default"
1070 #
1071 # If you have a problem with your MP3s ending abruptly it is recommended that
1072 # you set this argument to "no" to attempt to fix the problem. If this solves
1073 # the problem, it is highly recommended to fix the MP3 files with vbrfix
1074 # (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
1075 # point gapless MP3 playback can be enabled.
1076 #
1077 #gapless_mp3_playback                   "yes"
1078 #
1079 # Setting "restore_paused" to "yes" puts MPD into pause mode instead
1080 # of starting playback after startup.
1081 #
1082 #restore_paused "no"
1083 #
1084 # This setting enables MPD to create playlists in a format usable by other
1085 # music players.
1086 #
1087 #save_absolute_paths_in_playlists       "no"
1088 #
1089 # This setting defines a list of tag types that will be extracted during the
1090 # audio file discovery process. The complete list of possible values can be
1091 # found in the user manual.
1092 #metadata_to_use        "artist,album,title,track,name,genre,date,composer,performer,disc"
1093 #
1094 # This setting enables automatic update of MPD's database when files in
1095 # music_directory are changed.
1096 #
1097 #auto_update    "yes"
1098 #
1099 # Limit the depth of the directories being watched, 0 means only watch
1100 # the music directory itself.  There is no limit by default.
1101 #
1102 #auto_update_depth "3"
1103 #
1104 ###############################################################################
1105
1106
1107 # Symbolic link behavior ######################################################
1108 #
1109 # If this setting is set to "yes", MPD will discover audio files by following
1110 # symbolic links outside of the configured music_directory.
1111 #
1112 #follow_outside_symlinks        "yes"
1113 #
1114 # If this setting is set to "yes", MPD will discover audio files by following
1115 # symbolic links inside of the configured music_directory.
1116 #
1117 #follow_inside_symlinks         "yes"
1118 #
1119 ###############################################################################
1120
1121
1122 # Zeroconf / Avahi Service Discovery ##########################################
1123 #
1124 # If this setting is set to "yes", service information will be published with
1125 # Zeroconf / Avahi.
1126 #
1127 #zeroconf_enabled               "yes"
1128 #
1129 # The argument to this setting will be the Zeroconf / Avahi unique name for
1130 # this MPD server on the network.
1131 #
1132 #zeroconf_name                  "Music Player"
1133 #
1134 ###############################################################################
1135
1136
1137 # Permissions #################################################################
1138 #
1139 # If this setting is set, MPD will require password authorization. The password
1140 # setting can be specified multiple times for different password profiles.
1141 #
1142 #password                        "password@read,add,control,admin"
1143 #
1144 # This setting specifies the permissions a user has who has not yet logged in.
1145 #
1146 #default_permissions             "read,add,control,admin"
1147 #
1148 ###############################################################################
1149
1150
1151 # Database #######################################################################
1152 #
1153
1154 #database {
1155 #       plugin "proxy"
1156 #       host "other.mpd.host"
1157 #       port "6600"
1158 #}
1159
1160 # Input #######################################################################
1161 #
1162
1163 input {
1164         plugin "curl"
1165 #       proxy "proxy.isp.com:8080"
1166 #       proxy_user "user"
1167 #       proxy_password "password"
1168 }
1169
1170 #
1171 ###############################################################################
1172
1173 # Audio Output ################################################################
1174 #
1175
1176 audio_output {
1177     type    "pulse"
1178     name    "pulse audio"
1179 }
1180
1181 audio_output {
1182     type    "fifo"
1183     name    "my_fifo"
1184     path    "/tmp/mpd.fifo"
1185     format  "44100:16:2"
1186 }
1187
1188 # MPD supports various audio output types, as well as playing through multiple
1189 # audio outputs at the same time, through multiple audio_output settings
1190 # blocks. Setting this block is optional, though the server will only attempt
1191 # autodetection for one sound card.
1192 #
1193 # An example of an ALSA output:
1194 #
1195 #audio_output {
1196 #       type            "alsa"
1197 #       name            "My ALSA Device"
1198 ##      device          "hw:0,0"        # optional
1199 ##      mixer_type      "hardware"      # optional
1200 ##      mixer_device    "default"       # optional
1201 ##      mixer_control   "PCM"           # optional
1202 ##      mixer_index     "0"             # optional
1203 #}
1204 #
1205 # An example of an OSS output:
1206 #
1207 #audio_output {
1208 #       type            "oss"
1209 #       name            "My OSS Device"
1210 ##      device          "/dev/dsp"      # optional
1211 ##      mixer_type      "hardware"      # optional
1212 ##      mixer_device    "/dev/mixer"    # optional
1213 ##      mixer_control   "PCM"           # optional
1214 #}
1215 #
1216 # An example of a shout output (for streaming to Icecast):
1217 #
1218 #audio_output {
1219 #       type            "shout"
1220 #       encoder         "vorbis"                # optional
1221 #       name            "My Shout Stream"
1222 #       host            "localhost"
1223 #       port            "8000"
1224 #       mount           "/mpd.ogg"
1225 #       password        "hackme"
1226 #       quality         "5.0"
1227 #       bitrate         "128"
1228 #       format          "44100:16:1"
1229 ##      protocol        "icecast2"              # optional
1230 ##      user            "source"                # optional
1231 ##      description     "My Stream Description" # optional
1232 ##      url             "http://example.com"    # optional
1233 ##      genre           "jazz"                  # optional
1234 ##      public          "no"                    # optional
1235 ##      timeout         "2"                     # optional
1236 ##      mixer_type      "software"              # optional
1237 #}
1238 #
1239 # An example of a recorder output:
1240 #
1241 #audio_output {
1242 #       type            "recorder"
1243 #       name            "My recorder"
1244 #       encoder         "vorbis"                # optional, vorbis or lame
1245 #       path            "/var/lib/mpd/recorder/mpd.ogg"
1246 ##      quality         "5.0"                   # do not define if bitrate is defined
1247 #       bitrate         "128"                   # do not define if quality is defined
1248 #       format          "44100:16:1"
1249 #}
1250 #
1251 # An example of a httpd output (built-in HTTP streaming server):
1252 #
1253 #audio_output {
1254 #       type            "httpd"
1255 #       name            "My HTTP Stream"
1256 #       encoder         "vorbis"                # optional, vorbis or lame
1257 #       port            "8000"
1258 #       bind_to_address "0.0.0.0"               # optional, IPv4 or IPv6
1259 ##      quality         "5.0"                   # do not define if bitrate is defined
1260 #       bitrate         "128"                   # do not define if quality is defined
1261 #       format          "44100:16:1"
1262 #       max_clients     "0"                     # optional 0=no limit
1263 #}
1264 #
1265 # An example of a pulseaudio output (streaming to a remote pulseaudio server)
1266 #
1267 #audio_output {
1268 #       type            "pulse"
1269 #       name            "My Pulse Output"
1270 ##      server          "remote_server"         # optional
1271 ##      sink            "remote_server_sink"    # optional
1272 #}
1273 #
1274 # An example of a winmm output (Windows multimedia API).
1275 #
1276 #audio_output {
1277 #       type            "winmm"
1278 #       name            "My WinMM output"
1279 ##      device          "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1280 #               or
1281 ##      device          "0"             # optional
1282 ##      mixer_type      "hardware"      # optional
1283 #}
1284 #
1285 # An example of an openal output.
1286 #
1287 #audio_output {
1288 #       type            "openal"
1289 #       name            "My OpenAL output"
1290 ##      device          "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1291 #}
1292 #
1293 # An example of an sndio output.
1294 #
1295 #audio_output {
1296 #       type            "sndio"
1297 #       name            "sndio output"
1298 #       mixer_type      "software"
1299 #}
1300 #
1301 # An example of an OS X output:
1302 #
1303 #audio_output {
1304 #       type            "osx"
1305 #       name            "My OS X Device"
1306 ##      device          "Built-in Output"       # optional
1307 ##      channel_map      "-1,-1,0,1"    # optional
1308 #}
1309 #
1310 ## Example "pipe" output:
1311 #
1312 #audio_output {
1313 #       type            "pipe"
1314 #       name            "my pipe"
1315 #       command         "aplay -f cd 2>/dev/null"
1316 ## Or if you're want to use AudioCompress
1317 #       command         "AudioCompress -m | aplay -f cd 2>/dev/null"
1318 ## Or to send raw PCM stream through PCM:
1319 #       command         "nc example.org 8765"
1320 #       format          "44100:16:2"
1321 #}
1322 #
1323 ## An example of a null output (for no audio output):
1324 #
1325 #audio_output {
1326 #       type            "null"
1327 #       name            "My Null Output"
1328 #       mixer_type      "none"                  # optional
1329 #}
1330 #
1331 ###############################################################################
1332
1333
1334 # Normalization automatic volume adjustments ##################################
1335 #
1336 # This setting specifies the type of ReplayGain to use. This setting can have
1337 # the argument "off", "album", "track" or "auto". "auto" is a special mode that
1338 # chooses between "track" and "album" depending on the current state of
1339 # random playback. If random playback is enabled then "track" mode is used.
1340 # See <http://www.replaygain.org> for more details about ReplayGain.
1341 # This setting is off by default.
1342 #
1343 #replaygain                     "album"
1344 #
1345 # This setting sets the pre-amp used for files that have ReplayGain tags. By
1346 # default this setting is disabled.
1347 #
1348 #replaygain_preamp              "0"
1349 #
1350 # This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1351 # By default this setting is disabled.
1352 #
1353 #replaygain_missing_preamp      "0"
1354 #
1355 # This setting enables or disables ReplayGain limiting.
1356 # MPD calculates actual amplification based on the ReplayGain tags
1357 # and replaygain_preamp / replaygain_missing_preamp setting.
1358 # If replaygain_limit is enabled MPD will never amplify audio signal
1359 # above its original level. If replaygain_limit is disabled such amplification
1360 # might occur. By default this setting is enabled.
1361 #
1362 #replaygain_limit               "yes"
1363 #
1364 # This setting enables on-the-fly normalization volume adjustment. This will
1365 # result in the volume of all playing audio to be adjusted so the output has
1366 # equal "loudness". This setting is disabled by default.
1367 #
1368 #volume_normalization           "no"
1369 #
1370 ###############################################################################
1371
1372 # Character Encoding ##########################################################
1373 #
1374 # If file or directory names do not display correctly for your locale then you
1375 # may need to modify this setting.
1376 #
1377 #filesystem_charset             "UTF-8"
1378 #
1379 ###############################################################################
1380 #+end_src
1381
1382 ** msmtp
1383 :PROPERTIES:
1384 :header-args+: :tangle ~/.msmtprc
1385 :END:
1386
1387 #+begin_src conf
1388 # Set default values for all following accounts.
1389 defaults
1390 port 587
1391 tls on
1392 auth on
1393 #tls_trust_file /etc/ssl/certs/ca-certificates.crt
1394 logfile ~/.msmtp.log
1395
1396 # aminb
1397 account aminb
1398 host nix.aminb.org
1399 tls_fingerprint 65:DD:B8:32:D8:CD:F1:DC:B6:34:EE:35:04:18:AC:09:F3:1D:6D:20:F2:4A:E2:BD:64:48:B7:1F:90:BD:C4:BA
1400 tls_starttls on
1401 from amin@aminb.org
1402 user amin@aminb.org
1403 passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
1404
1405 # gnu
1406 account gnu
1407 host fencepost.gnu.org
1408 # use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1409 tls_fingerprint 28:70:42:76:1C:EC:91:5F:D1:B3:27:A1:CD:3B:32:A4:8B:0B:DC:3A:CD:CA:F6:6F:E4:61:BA:69:D7:4D:0D:0B
1410 tls_starttls on
1411 from aminb@gnu.org
1412 user aminb
1413 passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
1414
1415 # uwaterloo
1416 account uwaterloo
1417 host connect.uwaterloo.ca
1418 tls_starttls on
1419 from abandali@uwaterloo.ca
1420 user abandali
1421 passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
1422 tls_trust_file /etc/ssl/certs/ca-certificates.crt
1423
1424 # uwaterloo (friendly address)
1425 account uwaterloo-friendly : uwaterloo
1426 from amin.bandali@uwaterloo.ca
1427
1428 # Set a default account
1429 account default : aminb
1430 #+end_src
1431
1432 ** ncmpcpp
1433
1434 *** config
1435 :PROPERTIES:
1436 :header-args+: :tangle ~/.ncmpcpp/config
1437 :END:
1438
1439 #+begin_src conf :tangle no
1440 ##############################################################
1441 ## This is the example configuration file. Copy it to       ##
1442 ## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
1443 ## and set up your preferences.                             ##
1444 ##############################################################
1445 #
1446 ##### directories ######
1447 ##
1448 ## Directory for storing ncmpcpp related files.
1449 ## Changing it is useful if you want to store
1450 ## everything somewhere else and provide command
1451 ## line setting for alternative location to config
1452 ## file which defines that while launching ncmpcpp.
1453 ##
1454 #
1455 ncmpcpp_directory = ~/.ncmpcpp
1456 #
1457 ##
1458 ## Directory for storing downloaded lyrics. It
1459 ## defaults to ~/.lyrics since other MPD clients
1460 ## (eg. ncmpc) also use that location.
1461 ##
1462 #
1463 #lyrics_directory = ~/.lyrics
1464 #
1465 ##### connection settings #####
1466 #
1467 #mpd_host = localhost
1468 #
1469 #mpd_port = 6600
1470 #
1471 #mpd_connection_timeout = 5
1472 #
1473 ## Needed for tag editor and file operations to work.
1474 ##
1475 mpd_music_dir = ~/usr/music
1476 #
1477 #mpd_crossfade_time = 5
1478 #
1479 ##### music visualizer #####
1480 ##
1481 ## Note: In order to make music visualizer work you'll
1482 ## need to use mpd fifo output, whose format parameter
1483 ## has to be set to 44100:16:1 for mono visualization
1484 ## or 44100:16:2 for stereo visualization. Example
1485 ## configuration (it has to be put into mpd.conf):
1486 ##
1487 ## audio_output {
1488 ##        type            "fifo"
1489 ##        name            "Visualizer feed"
1490 ##        path            "/tmp/mpd.fifo"
1491 ##        format          "44100:16:2"
1492 ## }
1493 ##
1494 #
1495 visualizer_fifo_path = /tmp/mpd.fifo
1496 #
1497 ##
1498 ## Note: Below parameter is needed for ncmpcpp
1499 ## to determine which output provides data for
1500 ## visualizer and thus allow syncing between
1501 ## visualization and sound as currently there
1502 ## are some problems with it.
1503 ##
1504 #
1505 visualizer_output_name = my fifo
1506 #
1507 ##
1508 ## If you set format to 44100:16:2, make it 'yes'.
1509 ##
1510 visualizer_in_stereo = yes
1511 #
1512 ##
1513 ## Multiply received samples by given value. Very
1514 ## useful for proper visualization of quiet music.
1515 ##
1516 #visualizer_sample_multiplier = 1
1517 #
1518 ##
1519 ## Note: Below parameter defines how often ncmpcpp
1520 ## has to "synchronize" visualizer and audio outputs.
1521 ## 30 seconds is optimal value, but if you experience
1522 ## synchronization problems, set it to lower value.
1523 ## Keep in mind that sane values start with >=10.
1524 ##
1525 #
1526 visualizer_sync_interval = 30
1527 #
1528 ##
1529 ## Note: To enable spectrum frequency visualization
1530 ## you need to compile ncmpcpp with fftw3 support.
1531 ##
1532 #
1533 ## Available values: spectrum, wave, wave_filled, ellipse.
1534 ##
1535 visualizer_type = spectrum
1536 #
1537 #visualizer_look = ●▮
1538 visualizer_look = "●•"
1539 #
1540 #visualizer_color = blue, cyan, green, yellow, magenta, red
1541 #
1542 ## Alternative subset of 256 colors for terminals that support it.
1543 ##
1544 #visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
1545 #
1546 ##### system encoding #####
1547 ##
1548 ## ncmpcpp should detect your charset encoding
1549 ## but if it failed to do so, you can specify
1550 ## charset encoding you are using here.
1551 ##
1552 ## Note: You can see whether your ncmpcpp build
1553 ## supports charset detection by checking output
1554 ## of `ncmpcpp --version`.
1555 ##
1556 ## Note: Since MPD uses UTF-8 by default, setting
1557 ## this option makes sense only if your encoding
1558 ## is different.
1559 ##
1560 #
1561 #system_encoding = ""
1562 #
1563 ##### delays #####
1564 #
1565 ## Time of inactivity (in seconds) after playlist
1566 ## highlighting will be disabled (0 = always on).
1567 ##
1568 #playlist_disable_highlight_delay = 5
1569 #
1570 ## Defines how long messages are supposed to be visible.
1571 ##
1572 #message_delay_time = 5
1573 #
1574 ##### song format #####
1575 ##
1576 ## For a song format you can use:
1577 ##
1578 ## %l - length
1579 ## %f - filename
1580 ## %D - directory
1581 ## %a - artist
1582 ## %A - album artist
1583 ## %t - title
1584 ## %b - album
1585 ## %y - date
1586 ## %n - track number (01/12 -> 01)
1587 ## %N - full track info (01/12 -> 01/12)
1588 ## %g - genre
1589 ## %c - composer
1590 ## %p - performer
1591 ## %d - disc
1592 ## %C - comment
1593 ## %P - priority
1594 ## $R - begin right alignment
1595 ##
1596 ## If you want to make sure that a part of the format is displayed
1597 ## only when certain tags are present, you can archieve it by
1598 ## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
1599 ## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
1600 ## It is also possible to define a list of alternatives by providing
1601 ## several groups and separating them with '|', e.g. '{%t}|{%f}'
1602 ## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
1603 ## present.
1604 ##
1605 ## Note: If you want to set limit on maximal length of a tag, just
1606 ## put the appropriate number between % and character that defines
1607 ## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
1608 ##
1609 ## In addition, formats support markers used for text attributes.
1610 ## They are followed by character '$'. After that you can put:
1611 ##
1612 ## - 0 - default window color (discards all other colors)
1613 ## - 1 - black
1614 ## - 2 - red
1615 ## - 3 - green
1616 ## - 4 - yellow
1617 ## - 5 - blue
1618 ## - 6 - magenta
1619 ## - 7 - cyan
1620 ## - 8 - white
1621 ## - 9 - end of current color
1622 ## - b - bold text
1623 ## - u - underline text
1624 ## - r - reverse colors
1625 ## - a - use alternative character set
1626 ##
1627 ## If you don't want to use a non-color attribute anymore, just put it
1628 ## again, but this time insert character '/' between '$' and attribute
1629 ## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
1630 ## or filename with reversed colors.
1631 ##
1632 ## If you want to use 256 colors and/or background colors in formats
1633 ## (the naming scheme is described below in section about color
1634 ## definitions), it can be done with the syntax $(COLOR), e.g. to set
1635 ## the artist tag to one of the non-standard colors and make it have
1636 ## yellow background, you need to write $(197_yellow)%a$(end). Note
1637 ## that for standard colors this is interchangable with attributes
1638 ## listed above.
1639 ##
1640 ## Note: colors can be nested.
1641 ##
1642 #
1643 #song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
1644 #
1645 #song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
1646 #
1647 #song_library_format = {%n - }{%t}|{%f}
1648 #
1649 #
1650 #alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
1651 #
1652 #alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
1653 #
1654 #now_playing_prefix = $b
1655 #
1656 #now_playing_suffix = $/b
1657 #
1658 #browser_playlist_prefix = "$2playlist$9 "
1659 #
1660 #selected_item_prefix = $6
1661 #
1662 #selected_item_suffix = $9
1663 #
1664 #modified_item_prefix = $3> $9
1665 #
1666 ##
1667 ## Note: attributes are not supported for the following variables.
1668 ##
1669 #song_window_title_format = {%a - }{%t}|{%f}
1670 ##
1671 ## Note: Below variables are used for sorting songs in browser.
1672 ## The sort mode determines how songs are sorted, and can be used
1673 ## in combination with a sort format to specify a custom sorting format.
1674 ## Available values for browser_sort_mode are "name", "mtime", "format"
1675 ## and "noop".
1676 ##
1677 #
1678 #browser_sort_mode = name
1679 #
1680 #browser_sort_format = {%a - }{%t}|{%f} {(%l)}
1681 #
1682 ##### columns settings #####
1683 ##
1684 ## syntax of song columns list format is "column column etc."
1685 ##
1686 ## - syntax for each column is:
1687 ##
1688 ## (width of the column)[color of the column]{displayed tag}
1689 ##
1690 ## Note: Width is by default in %, if you want a column to
1691 ## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
1692 ## will be the column that take 10% of screen (so the real width
1693 ## will depend on actual screen size), whereas (10f)[white]{a}
1694 ## will take 10 terminal cells, no matter how wide the screen is.
1695 ##
1696 ## - color is optional (if you want the default one,
1697 ##   leave the field empty).
1698 ##
1699 ## Note: You can give a column additional attributes by putting appropriate
1700 ## character after displayed tag character. Available attributes are:
1701 ##
1702 ## - r - column will be right aligned
1703 ## - E - if tag is empty, empty tag marker won't be displayed
1704 ##
1705 ## You can also:
1706 ##
1707 ## - give a column custom name by putting it after attributes,
1708 ##   separated with character ':', e.g. {lr:Length} gives you
1709 ##   right aligned column of lengths named "Length".
1710 ##
1711 ## - define sequence of tags, that have to be displayed in case
1712 ##   predecessor is empty in a way similar to the one in classic
1713 ##   song format, i.e. using '|' character, e.g. {a|c|p:Owner}
1714 ##   creates column named "Owner" that tries to display artist
1715 ##   tag and then composer and performer if previous ones are
1716 ##   not available.
1717 ##
1718 #
1719 #song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
1720 #
1721 ##### various settings #####
1722 #
1723 ##
1724 ## Note: Custom command that will be executed each
1725 ## time song changes. Useful for notifications etc.
1726 ##
1727 #execute_on_song_change = ""
1728 #
1729 #playlist_show_mpd_host = no
1730 #
1731 #playlist_show_remaining_time = no
1732 #
1733 #playlist_shorten_total_times = no
1734 #
1735 #playlist_separate_albums = no
1736 #
1737 ##
1738 ## Note: Possible display modes: classic, columns.
1739 ##
1740 #playlist_display_mode = columns
1741 #
1742 #browser_display_mode = classic
1743 #
1744 #search_engine_display_mode = classic
1745 #
1746 #playlist_editor_display_mode = classic
1747 #
1748 #discard_colors_if_item_is_selected = yes
1749 #
1750 #incremental_seeking = yes
1751 #
1752 #seek_time = 1
1753 #
1754 #volume_change_step = 2
1755 #
1756 #autocenter_mode = no
1757 #
1758 #centered_cursor = no
1759 #
1760 ##
1761 ## Note: You can specify third character which will
1762 ## be used to build 'empty' part of progressbar.
1763 ##
1764 #progressbar_look = =>
1765 progressbar_look = "─╼╶"
1766 #progressbar_look = "─⊙╶"
1767 #
1768 #progressbar_boldness = yes
1769 #
1770 ## Available values: database, playlist.
1771 ##
1772 #default_place_to_search_in = database
1773 #
1774 ## Available values: classic, alternative.
1775 ##
1776 #user_interface = classic
1777 #
1778 #data_fetching_delay = yes
1779 #
1780 ## Available values: artist, album_artist, date, genre, composer, performer.
1781 ##
1782 #media_library_primary_tag = artist
1783 #
1784 ## Available values: wrapped, normal.
1785 ##
1786 #default_find_mode = wrapped
1787 #
1788 #default_tag_editor_pattern = %n - %t
1789 #
1790 #header_visibility = yes
1791 #
1792 #statusbar_visibility = yes
1793 #
1794 #titles_visibility = yes
1795 #
1796 #header_text_scrolling = yes
1797 #
1798 #cyclic_scrolling = no
1799 #
1800 #lines_scrolled = 2
1801 #
1802 #follow_now_playing_lyrics = no
1803 #
1804 #fetch_lyrics_for_current_song_in_background = no
1805 #
1806 #store_lyrics_in_song_dir = no
1807 #
1808 #generate_win32_compatible_filenames = yes
1809 #
1810 #allow_for_physical_item_deletion = no
1811 #
1812 ##
1813 ## Note: If you set this variable, ncmpcpp will try to
1814 ## get info from last.fm in language you set and if it
1815 ## fails, it will fall back to english. Otherwise it will
1816 ## use english the first time.
1817 ##
1818 ## Note: Language has to be expressed as an ISO 639 alpha-2 code.
1819 ##
1820 #lastfm_preferred_language = en
1821 #
1822 #show_hidden_files_in_local_browser = no
1823 #
1824 ##
1825 ## How shall screen switcher work?
1826 ##
1827 ## - "previous" - switch between the current and previous screen.
1828 ## - "screen1,...,screenN" - switch between given sequence of screens.
1829 ##
1830 ## Screens available for use: help, playlist, browser, search_engine,
1831 ## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
1832 ##
1833 #screen_switcher_mode = playlist, browser
1834 #
1835 ##
1836 ## Note: You can define startup screen
1837 ## by choosing screen from the list above.
1838 ##
1839 #startup_screen = playlist
1840 #
1841 ##
1842 ## Note: You can define startup slave screen
1843 ## by choosing screen from the list above or
1844 ## an empty value for no slave screen.
1845 ##
1846 #startup_slave_screen = ""
1847 #
1848 #startup_slave_screen_focus = no
1849 #
1850 ##
1851 ## Default width of locked screen (in %).
1852 ## Acceptable values are from 20 to 80.
1853 ##
1854 #
1855 #locked_screen_width_part = 50
1856 #
1857 #ask_for_locked_screen_width_part = yes
1858 #
1859 #jump_to_now_playing_song_at_start = yes
1860 #
1861 #ask_before_clearing_playlists = yes
1862 #
1863 #clock_display_seconds = no
1864 #
1865 #display_volume_level = yes
1866 #
1867 #display_bitrate = no
1868 #
1869 #display_remaining_time = no
1870 #
1871 ## Available values: none, basic, extended, perl.
1872 ##
1873 #regular_expressions = perl
1874 #
1875 ##
1876 ## Note: If below is enabled, ncmpcpp will ignore leading
1877 ## "The" word while sorting items in browser, tags in
1878 ## media library, etc.
1879 ##
1880 #ignore_leading_the = no
1881 #
1882 #block_search_constraints_change_if_items_found = yes
1883 #
1884 #mouse_support = yes
1885 #
1886 #mouse_list_scroll_whole_page = yes
1887 #
1888 #empty_tag_marker = <empty>
1889 #
1890 #tags_separator = " | "
1891 #
1892 #tag_editor_extended_numeration = no
1893 #
1894 #media_library_sort_by_mtime = no
1895 #
1896 #enable_window_title = yes
1897 #
1898 ##
1899 ## Note: You can choose default search mode for search
1900 ## engine. Available modes are:
1901 ##
1902 ## - 1 - use mpd built-in searching (no regexes, pattern matching)
1903 ## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
1904 ##       but if your mpd is on a remote machine, downloading big database
1905 ##       to process it can take a while
1906 ## - 3 - match only exact values (this mode uses mpd function for searching
1907 ##       in database and local one for searching in current playlist)
1908 ##
1909 #
1910 #search_engine_default_search_mode = 1
1911 #
1912 #external_editor = nano
1913 #
1914 ## Note: set to yes if external editor is a console application.
1915 ##
1916 #use_console_editor = yes
1917 #
1918 ##### colors definitions #####
1919 ##
1920 ## It is possible to set a background color by setting a color
1921 ## value "<foreground>_<background>", e.g. red_black will set
1922 ## foregound color to red and background color to black.
1923 ##
1924 ## In addition, for terminals that support 256 colors it
1925 ## is possible to set one of them by using a number in range
1926 ## [1, 256] instead of color name, e.g. numerical value
1927 ## corresponding to red_black is 2_1. To find out if the
1928 ## terminal supports 256 colors, run ncmpcpp and check out
1929 ## the bottom of the help screen for list of available colors
1930 ## and their numerical values.
1931 ##
1932 ## Note: due to technical limitations of ncurses, if 256 colors
1933 ## are used, it is possible to either use only the colors with
1934 ## default background color, or all pairs from 1_1 up to 254_127,
1935 ## depending on the ncurses version used.
1936 ##
1937 #
1938 #colors_enabled = yes
1939 #
1940 #empty_tag_color = cyan
1941 #
1942 #header_window_color = default
1943 #
1944 #volume_color = default
1945 #
1946 #state_line_color = default
1947 #
1948 #state_flags_color = default
1949 #
1950 #main_window_color = yellow
1951 #
1952 #color1 = white
1953 #
1954 #color2 = green
1955 #
1956 #main_window_highlight_color = yellow
1957 #
1958 #progressbar_color = black
1959 #
1960 #progressbar_elapsed_color = green
1961 #
1962 #statusbar_color = default
1963 #
1964 #alternative_ui_separator_color = black
1965 #
1966 #active_column_color = red
1967 #
1968 #window_border_color = green
1969 #
1970 #active_window_border = red
1971 #
1972 #+end_src
1973
1974 *** bindings
1975 :PROPERTIES:
1976 :header-args+: :tangle ~/.ncmpcpp/bindings
1977 :END:
1978
1979 #+begin_src conf :tangle no
1980 def_key "j"
1981     scroll_down
1982 def_key "k"
1983     scroll_up
1984
1985 def_key "ctrl-u"
1986     page_up
1987 def_key "ctrl-d"
1988     page_down
1989
1990 def_key "h"
1991     previous_column
1992 def_key "l"
1993     next_column
1994
1995 def_key "."
1996     show_lyrics
1997
1998 def_key "n"
1999     next_found_item
2000 def_key "N"
2001     previous_found_item
2002
2003 def_key "J"
2004     move_sort_order_down
2005 def_key "K"
2006     move_sort_order_up
2007 #+end_src
2008
2009 ** notmuch
2010
2011 *** notmuch-config
2012 :PROPERTIES:
2013 :header-args+: :tangle ~/.notmuch-config
2014 :END:
2015
2016 #+begin_src conf
2017 # .notmuch-config - Configuration file for the notmuch mail system
2018 #
2019 # For more information about notmuch, see https://notmuchmail.org
2020
2021 # Database configuration
2022 #
2023 # The only value supported here is 'path' which should be the top-level
2024 # directory where your mail currently exists and to where mail will be
2025 # delivered in the future. Files should be individual email messages.
2026 # Notmuch will store its database within a sub-directory of the path
2027 # configured here named ".notmuch".
2028 #
2029 [database]
2030 path=/home/amin/mail
2031
2032 # User configuration
2033 #
2034 # Here is where you can let notmuch know how you would like to be
2035 # addressed. Valid settings are
2036 #
2037 #       name            Your full name.
2038 #       primary_email   Your primary email address.
2039 #       other_email     A list (separated by ';') of other email addresses
2040 #                       at which you receive email.
2041 #
2042 # Notmuch will use the various email addresses configured here when
2043 # formatting replies. It will avoid including your own addresses in the
2044 # recipient list of replies, and will set the From address based on the
2045 # address to which the original email was addressed.
2046 #
2047 [user]
2048 name=Amin Bandali
2049 primary_email=amin@aminb.org
2050 other_email=abandali@uwaterloo.ca;amin.bandali@uwaterloo.ca;aminb@gnu.org;
2051
2052 # Configuration for "notmuch new"
2053 #
2054 # The following options are supported here:
2055 #
2056 #       tags    A list (separated by ';') of the tags that will be
2057 #               added to all messages incorporated by "notmuch new".
2058 #
2059 #       ignore  A list (separated by ';') of file and directory names
2060 #               that will not be searched for messages by "notmuch new".
2061 #
2062 #               NOTE: *Every* file/directory that goes by one of those
2063 #               names will be ignored, independent of its depth/location
2064 #               in the mail store.
2065 #
2066 [new]
2067 tags=new;
2068 #tags=unread;inbox;
2069 ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
2070
2071 # Search configuration
2072 #
2073 # The following option is supported here:
2074 #
2075 #       exclude_tags
2076 #               A ;-separated list of tags that will be excluded from
2077 #               search results by default.  Using an excluded tag in a
2078 #               query will override that exclusion.
2079 #
2080 [search]
2081 exclude_tags=deleted;spam;
2082
2083 # Maildir compatibility configuration
2084 #
2085 # The following option is supported here:
2086 #
2087 #       synchronize_flags      Valid values are true and false.
2088 #
2089 #       If true, then the following maildir flags (in message filenames)
2090 #       will be synchronized with the corresponding notmuch tags:
2091 #
2092 #               Flag    Tag
2093 #               ----    -------
2094 #               D       draft
2095 #               F       flagged
2096 #               P       passed
2097 #               R       replied
2098 #               S       unread (added when 'S' flag is not present)
2099 #
2100 #       The "notmuch new" command will notice flag changes in filenames
2101 #       and update tags, while the "notmuch tag" and "notmuch restore"
2102 #       commands will notice tag changes and update flags in filenames
2103 #
2104 [maildir]
2105 synchronize_flags=true
2106
2107 # Cryptography related configuration
2108 #
2109 # The following option is supported here:
2110 #
2111 #       gpg_path
2112 #               binary name or full path to invoke gpg.
2113 #
2114 [crypto]
2115 gpg_path=gpg
2116 #+end_src
2117
2118 *** pre-new hook
2119 :PROPERTIES:
2120 :header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
2121 :END:
2122
2123 #+begin_src sh
2124 touch /tmp/gnusieve.log
2125 sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
2126              -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
2127 #+end_src
2128
2129 *** post-new hook
2130 :PROPERTIES:
2131 :header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
2132 :END:
2133
2134 #+begin_src sh
2135 # apply sent tag to messages sent by me
2136 notmuch tag -new +sent -- from:amin@aminb.org or from:aminb@gnu.org or from:abandali@uwaterloo.ca or from:amin.bandali@uwaterloo.ca
2137
2138 # initial tagging
2139 notmuch tag +inbox +unread -new -- tag:new
2140
2141
2142 # apply tags to lists
2143
2144 # <aminb>
2145 notmuch tag -inbox +lists/~sircmpwn/srht-admins   -- folder:amin/lists/~sircmpwn/srht-admins
2146 notmuch tag -inbox +lists/~sircmpwn/srht-announce -- folder:amin/lists/~sircmpwn/srht-announce
2147 notmuch tag -inbox +lists/~sircmpwn/srht-dev      -- folder:amin/lists/~sircmpwn/srht-dev
2148 notmuch tag -inbox +lists/~sircmpwn/srht-discuss  -- folder:amin/lists/~sircmpwn/srht-discuss
2149
2150 notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
2151 notmuch tag -inbox +lists/haskell-weekly   -- folder:amin/lists/haskell-weekly
2152 # </aminb>
2153
2154 # <uw>
2155 notmuch tag -inbox +lists/cs136 -- folder:uwaterloo/lists/cs136
2156 notmuch tag -inbox +lists/se463 -- folder:uwaterloo/lists/se463
2157
2158 notmuch tag -inbox +lists/clvsingle        -- folder:uwaterloo/lists/Clvsingle
2159 notmuch tag -inbox +lists/gsa              -- folder:uwaterloo/lists/GSA
2160 notmuch tag -inbox +lists/math-grad        -- folder:uwaterloo/lists/Math-grad
2161 notmuch tag -inbox +lists/scs-grads        -- folder:uwaterloo/lists/scs-grads
2162 notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
2163 # </uw>
2164
2165 # <gnu>
2166 notmuch tag -inbox +lists/emacs-devel       -- folder:gnu/l/emacs-devel
2167 notmuch tag -inbox +lists/emacs-orgmode     -- folder:gnu/l/emacs-orgmode
2168 notmuch tag -inbox +lists/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
2169 notmuch tag -inbox +lists/fencepost-users   -- folder:gnu/l/fencepost-users
2170 notmuch tag -inbox +lists/guix-devel        -- folder:gnu/l/guix-devel
2171 notmuch tag -inbox +lists/guile-devel       -- folder:gnu/l/guile-devel
2172 notmuch tag -inbox +lists/help-gnu-emacs    -- folder:gnu/l/help-gnu-emacs
2173 notmuch tag -inbox +lists/info-gnu-emacs    -- folder:gnu/l/info-gnu-emacs
2174 notmuch tag -inbox +lists/www-commits       -- folder:gnu/l/www-commits
2175 notmuch tag -inbox +lists/www-discuss       -- folder:gnu/l/www-discuss
2176 notmuch tag -inbox +webmasters              -- folder:gnu/webmasters
2177
2178 notmuch tag -inbox +lists/deepspec          -- folder:gnu/l/deepspec
2179 notmuch tag -inbox +lists/haskell-cafe      -- folder:gnu/l/haskell-cafe
2180 notmuch tag -inbox +lists/haskell-art       -- folder:gnu/l/haskell-art
2181 notmuch tag -inbox +lists/notmuch           -- folder:gnu/l/notmuch
2182 #</gnu>
2183 #+end_src
2184
2185 *** notmuch.service
2186 :PROPERTIES:
2187 :header-args+: :tangle ~/.config/systemd/user/notmuch.service
2188 :END:
2189
2190 #+begin_src conf :tangle no
2191 [Unit]
2192 Description=notmuch service
2193
2194 [Service]
2195 Type=oneshot
2196 ExecStart=/usr/bin/notmuch new
2197 StandardOutput=syslog
2198 StandardError=syslog
2199 #+end_src
2200
2201 *** notmuch.timer
2202 :PROPERTIES:
2203 :header-args+: :tangle ~/.config/systemd/user/notmuch.timer
2204 :END:
2205
2206 #+begin_src conf :tangle no
2207 [Unit]
2208 Description=notmuch timer
2209
2210 [Timer]
2211 OnCalendar=*:0/5
2212 Persistent=true
2213 Unit=notmuch.service
2214
2215 [Install]
2216 WantedBy=timers.target
2217 #+end_src
2218
2219 ** offlineimap
2220
2221 *** offlineimaprc
2222 :PROPERTIES:
2223 :header-args+: :tangle ~/.offlineimaprc
2224 :END:
2225
2226 #+begin_src conf :tangle no
2227 [general]
2228 pythonfile = ~/.offlineimap.py
2229 accounts = Gmail, aminb
2230 maxsyncaccounts = 3
2231
2232 [Account Gmail]
2233 localrepository = GmailL
2234 remoterepository = GmailR
2235
2236 [Account aminb]
2237 localrepository = aminbL
2238 remoterepository = aminbR
2239
2240 [Repository GmailL]
2241 type = Maildir
2242 localfolders = ~/Maildir/Gmail
2243
2244 [Repository GmailR]
2245 type = IMAP
2246 remotehost = imap.gmail.com
2247 remoteusereval = mailuser("gmail")
2248 remotepasseval = mailpasswd("gmail")
2249 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2250 ssl = yes
2251 folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
2252 maxconnections = 1
2253 realdelete = no
2254
2255 [Repository aminbL]
2256 type = Maildir
2257 localfolders = ~/Maildir/aminb
2258
2259 [Repository aminbR]
2260 type = IMAP
2261 remotehost = mail.aminb.org
2262 remoteusereval = mailuser("aminb")
2263 remotepasseval = mailpasswd("aminb")
2264 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2265 ssl = yes
2266 folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
2267 maxconnections = 1
2268 realdelete = no
2269 #+end_src
2270
2271 *** offlineimap.py
2272 :PROPERTIES:
2273 :header-args+: :tangle ~/.offlineimap.py
2274 :END:
2275
2276 #+begin_src python :tangle no
2277 import os
2278 import subprocess
2279
2280 def mailpasswd(acct):
2281     acct = os.path.basename(acct)
2282     path = "/home/amin/.passwd/%s.gpg" % acct
2283     args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
2284     try:
2285         return subprocess.check_output(args).strip()
2286     except subprocess.CalledProcessError:
2287         return ""
2288
2289 def mailuser(acct):
2290     acct = os.path.basename(acct)
2291     path = "/home/amin/.passwd/%s" % acct
2292     args = ["cat", path]
2293     try:
2294         return subprocess.check_output(args).strip()
2295     except subprocess.CalledProcessError:
2296         return ""
2297
2298 def prime_gpg_agent():
2299   ret = False
2300   i = 1
2301   while not ret:
2302     ret = (mailpasswd("prime") == "prime")
2303     if i > 2:
2304       from offlineimap.ui import getglobalui
2305       sys.stderr.write("Error reading in passwords. Terminating.\n")
2306       getglobalui().terminate()
2307     i += 1
2308   return ret
2309
2310 prime_gpg_agent()
2311 #+end_src
2312
2313 ** pigeonhole
2314 *** gnu.sieve
2315 :PROPERTIES:
2316 :header-args+: :tangle ~/sieve/gnu.sieve :comments none
2317 :END:
2318
2319 #+begin_src conf
2320 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags", "include" ];
2321
2322 if anyof (
2323   address :is "from" "webmasters@gnu.org",
2324   address :is "from" "webmasters-comment@gnu.org") {
2325   fileinto :create "webmasters";
2326   stop;
2327 }
2328
2329 include :personal "lists";
2330 #+end_src
2331
2332 *** lists.sieve
2333 :PROPERTIES:
2334 :header-args+: :tangle ~/sieve/lists.sieve :comments none
2335 :END:
2336
2337 #+begin_src conf
2338 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags",
2339  "include" ];
2340
2341 if anyof (
2342     header :contains "list-id" "<emacs-devel.gnu.org>",
2343     header :contains "list-id" "<emacs-orgmode.gnu.org>",
2344     header :contains "list-id" "<emacsconf-discuss.gnu.org>",
2345     header :contains "list-id" "<fencepost-users.gnu.org>",
2346     header :contains "list-id" "<guix-devel.gnu.org>",
2347     header :contains "list-id" "<guile-devel.gnu.org>",
2348     header :contains "list-id" "<help-gnu-emacs.gnu.org>",
2349     header :contains "list-id" "<info-gnu-emacs.gnu.org>",
2350     header :contains "list-id" "<www-commits.gnu.org>",
2351     header :contains "list-id" "<www-discuss.gnu.org>",
2352     header :contains "list-id" "<deepspec.lists.cs.princeton.edu>",
2353     header :contains "list-id" "<haskell-cafe.haskell.org>",
2354     header :contains "list-id" "<haskell-art.we.lurk.org>",
2355     header :contains "list-id" "<notmuch.notmuchmail.org>") {
2356     if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
2357         set :lower "listname" "${1}";
2358         fileinto :create "l/${listname}";
2359     }
2360 }
2361 #+end_src
2362
2363 ** polybar
2364
2365 *** config
2366 :PROPERTIES:
2367 :header-args+: :tangle ~/.config/polybar/config
2368 :END:
2369
2370 #+begin_src conf :tangle no
2371 ;=====================================================
2372 ;
2373 ;   To learn more about how to configure Polybar
2374 ;   go to https://github.com/jaagr/polybar
2375 ;
2376 ;   The README contains alot of information
2377 ;
2378 ;=====================================================
2379
2380 [colors]
2381 ;background = ${xrdb:color0:#222}
2382 background = #222
2383 background-alt = #444
2384 ;foreground = ${xrdb:color7:#222}
2385 foreground = #eee
2386 foreground-alt = #888
2387 primary = #ffb52a
2388 secondary = #e60053
2389 alert = #bd2c40
2390
2391 [bar/main]
2392 ;monitor = ${env:MONITOR:HDMI-1}
2393 width = 100%
2394 height = 27
2395 ;offset-x = 1%
2396 ;offset-y = 1%
2397 radius = 3.0
2398 fixed-center = true
2399
2400 background = ${colors.background}
2401 foreground = ${colors.foreground}
2402
2403 line-size = 3
2404 line-color = #f00
2405
2406 border-size = 4
2407 border-color = #00000000
2408
2409 padding-left = 0
2410 padding-right = 2
2411
2412 module-margin-left = 2
2413 module-margin-right = 2
2414
2415 font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
2416 font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
2417 font-2 = Wuncon Siji:pixelsize=10;1
2418 font-3 = FontAwesome:pixelsize=10;1
2419
2420 modules-left = bspwm xwindow
2421 modules-center =
2422 modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
2423
2424 tray-position = right
2425 tray-padding = 1
2426 ;tray-transparent = true
2427 ;tray-background = #0063ff
2428 tray-maxsize = 18
2429
2430 wm-restack = bspwm
2431
2432 ;override-redirect = true
2433
2434 scroll-up = bspwm-desknext
2435 scroll-down = bspwm-deskprev
2436
2437 [module/xwindow]
2438 type = internal/xwindow
2439 label = %title:0:50:...%
2440
2441 [module/xkeyboard]
2442 type = internal/xkeyboard
2443 blacklist-0 = num lock
2444
2445 format-prefix = " "
2446 format-prefix-foreground = ${colors.foreground-alt}
2447 format-prefix-underline = ${colors.secondary}
2448
2449 label-layout = %layout%
2450 label-layout-underline = ${colors.secondary}
2451
2452 label-indicator-padding = 2
2453 label-indicator-margin = 1
2454 label-indicator-background = ${colors.secondary}
2455 label-indicator-underline = ${colors.secondary}
2456
2457 [module/filesystem]
2458 type = internal/fs
2459 interval = 25
2460
2461 mount-0 = /
2462
2463 label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
2464 label-unmounted = %mountpoint% not mounted
2465 label-unmounted-foreground = ${colors.foreground-alt}
2466
2467 [module/bspwm]
2468 type = internal/bspwm
2469
2470 label-focused = %index%
2471 label-focused-background = ${colors.background-alt}
2472 label-focused-underline= ${colors.primary}
2473 label-focused-padding = 2
2474
2475 label-occupied = %index%
2476 label-occupied-padding = 2
2477
2478 label-urgent = %index%!
2479 label-urgent-background = ${colors.alert}
2480 label-urgent-padding = 2
2481
2482 label-empty = %index%
2483 label-empty-foreground = ${colors.foreground-alt}
2484 label-empty-padding = 2
2485
2486 [module/i3]
2487 type = internal/i3
2488 format = <label-state> <label-mode>
2489 index-sort = true
2490 wrapping-scroll = false
2491
2492 ; Only show workspaces on the same output as the bar
2493 ;pin-workspaces = true
2494
2495 label-mode-padding = 2
2496 label-mode-foreground = #000
2497 label-mode-background = ${colors.primary}
2498
2499 ; focused = Active workspace on focused monitor
2500 label-focused = %index%
2501 label-focused-background = ${module/bspwm.label-focused-background}
2502 label-focused-underline = ${module/bspwm.label-focused-underline}
2503 label-focused-padding = ${module/bspwm.label-focused-padding}
2504
2505 ; unfocused = Inactive workspace on any monitor
2506 label-unfocused = %index%
2507 label-unfocused-padding = ${module/bspwm.label-occupied-padding}
2508
2509 ; visible = Active workspace on unfocused monitor
2510 label-visible = %index%
2511 label-visible-background = ${self.label-focused-background}
2512 label-visible-underline = ${self.label-focused-underline}
2513 label-visible-padding = ${self.label-focused-padding}
2514
2515 ; urgent = Workspace with urgency hint set
2516 label-urgent = %index%
2517 label-urgent-background = ${module/bspwm.label-urgent-background}
2518 label-urgent-padding = ${module/bspwm.label-urgent-padding}
2519
2520 [module/mpd]
2521 type = internal/mpd
2522 format-online = <label-song>  <icon-prev> <icon-stop> <toggle> <icon-next>
2523
2524 icon-prev = 
2525 icon-stop = 
2526 icon-play = 
2527 icon-pause = 
2528 icon-next = 
2529
2530 label-song-maxlen = 25
2531 label-song-ellipsis = true
2532
2533 [module/xbacklight]
2534 type = internal/xbacklight
2535
2536 format = <label> <bar>
2537 label = BL
2538
2539 bar-width = 10
2540 bar-indicator = |
2541 bar-indicator-foreground = #ff
2542 bar-indicator-font = 2
2543 bar-fill = ─
2544 bar-fill-font = 2
2545 bar-fill-foreground = #9f78e1
2546 bar-empty = ─
2547 bar-empty-font = 2
2548 bar-empty-foreground = ${colors.foreground-alt}
2549
2550 [module/backlight-acpi]
2551 inherit = module/xbacklight
2552 type = internal/backlight
2553 ;card = intel_backlight
2554 card = mba6x_backlight
2555
2556 [module/cpu]
2557 type = internal/cpu
2558 interval = 2
2559 format-prefix = " "
2560 format-prefix-foreground = ${colors.foreground-alt}
2561 format-underline = #f90000
2562 label = %percentage%%
2563
2564 [module/memory]
2565 type = internal/memory
2566 interval = 2
2567 format-prefix = " "
2568 format-prefix-foreground = ${colors.foreground-alt}
2569 format-underline = #4bffdc
2570 label = %percentage_used%%
2571
2572 [module/wlan]
2573 type = internal/network
2574 interface =
2575 interval = 3.0
2576
2577 format-connected = <ramp-signal> <label-connected>
2578 format-connected-underline = #9f78e1
2579 label-connected = %essid%
2580
2581 format-disconnected =
2582 ;format-disconnected = <label-disconnected>
2583 ;format-disconnected-underline = ${self.format-connected-underline}
2584 ;label-disconnected = %ifname% disconnected
2585 ;label-disconnected-foreground = ${colors.foreground-alt}
2586
2587 ramp-signal-0 = 
2588 ramp-signal-1 = 
2589 ramp-signal-2 = 
2590 ramp-signal-3 = 
2591 ramp-signal-4 = 
2592 ramp-signal-foreground = ${colors.foreground-alt}
2593
2594 [module/eth]
2595 type = internal/network
2596 interface =
2597 interval = 3.0
2598
2599 format-connected-underline = #55aa55
2600 format-connected-prefix = " "
2601 format-connected-prefix-foreground = ${colors.foreground-alt}
2602 label-connected = %local_ip%
2603
2604 format-disconnected =
2605 ;format-disconnected = <label-disconnected>
2606 ;format-disconnected-underline = ${self.format-connected-underline}
2607 ;label-disconnected = %ifname% disconnected
2608 ;label-disconnected-foreground = ${colors.foreground-alt}
2609
2610 [module/date]
2611 type = internal/date
2612 interval = 5
2613
2614 date =
2615 date-alt = " %Y-%m-%d"
2616
2617 time = %H:%M
2618 time-alt = %H:%M:%S
2619
2620 format-prefix = 
2621 format-prefix-foreground = ${colors.foreground-alt}
2622 format-underline = #0a6cf5
2623
2624 label = %date% %time%
2625
2626 [module/volume]
2627 type = internal/volume
2628
2629 format-volume = <label-volume> <bar-volume>
2630 label-volume = vol
2631 label-volume-foreground = ${root.foreground}
2632
2633 format-muted-prefix = " "
2634 format-muted-foreground = ${colors.foreground-alt}
2635 label-muted = mute
2636
2637 bar-volume-width = 10
2638 bar-volume-foreground-0 = #55aa55
2639 bar-volume-foreground-1 = #55aa55
2640 bar-volume-foreground-2 = #55aa55
2641 bar-volume-foreground-3 = #55aa55
2642 bar-volume-foreground-4 = #55aa55
2643 bar-volume-foreground-5 = #f5a70a
2644 bar-volume-foreground-6 = #ff5555
2645 bar-volume-gradient = false
2646 bar-volume-indicator = |
2647 bar-volume-indicator-font = 2
2648 bar-volume-fill = ─
2649 bar-volume-fill-font = 2
2650 bar-volume-empty = ─
2651 bar-volume-empty-font = 2
2652 bar-volume-empty-foreground = ${colors.foreground-alt}
2653
2654 [module/battery]
2655 type = internal/battery
2656 battery = BAT0
2657 adapter = ADP1
2658 full-at = 64
2659
2660 format-charging = <animation-charging> <label-charging>
2661 format-charging-underline = #ffb52a
2662
2663 format-discharging = <ramp-capacity> <label-discharging>
2664 format-discharging-underline = ${self.format-charging-underline}
2665
2666 format-full-prefix = " "
2667 format-full-prefix-foreground = ${colors.foreground-alt}
2668 format-full-underline = ${self.format-charging-underline}
2669
2670 ramp-capacity-0 = 
2671 ramp-capacity-1 = 
2672 ramp-capacity-2 = 
2673 ramp-capacity-foreground = ${colors.foreground-alt}
2674
2675 animation-charging-0 = 
2676 animation-charging-1 = 
2677 animation-charging-2 = 
2678 animation-charging-foreground = ${colors.foreground-alt}
2679 animation-charging-framerate = 750
2680
2681 [module/temperature]
2682 type = internal/temperature
2683 thermal-zone = 1
2684 warn-temperature = 66
2685
2686 format = <ramp> <label>
2687 format-underline = #f50a4d
2688 format-warn = <ramp> <label-warn>
2689 format-warn-underline = ${self.format-underline}
2690
2691 label = %temperature%
2692 label-warn = %temperature%
2693 label-warn-foreground = ${colors.secondary}
2694
2695 ramp-0 = 
2696 ramp-1 = 
2697 ramp-2 = 
2698 ramp-foreground = ${colors.foreground-alt}
2699
2700 [module/powermenu]
2701 type = custom/menu
2702
2703 format-spacing = 1
2704
2705 label-open = 
2706 label-open-foreground = ${colors.secondary}
2707 label-close =  cancel
2708 label-close-foreground = ${colors.secondary}
2709 label-separator = |
2710 label-separator-foreground = ${colors.foreground-alt}
2711
2712 menu-0-0 = reboot
2713 menu-0-0-exec = menu-open-1
2714 menu-0-1 = power off
2715 menu-0-1-exec = menu-open-2
2716
2717 menu-1-0 = cancel
2718 menu-1-0-exec = menu-open-0
2719 menu-1-1 = reboot
2720 menu-1-1-exec = sudo reboot
2721
2722 menu-2-0 = power off
2723 menu-2-0-exec = sudo poweroff
2724 menu-2-1 = cancel
2725 menu-2-1-exec = menu-open-0
2726
2727 [module/mail]
2728 type = custom/script
2729 interval = 60
2730 format = <label>
2731 format-prefix = " "
2732 format-prefix-foreground = ${colors.foreground-alt}
2733 format-underline = #0a6cf5
2734 exec = notmuch count tag:unread
2735
2736 [settings]
2737 screenchange-reload = true
2738 ;compositing-background = xor
2739 ;compositing-background = screen
2740 ;compositing-foreground = source
2741 ;compositing-border = over
2742
2743 [global/wm]
2744 margin-top = 0
2745 margin-bottom = 0
2746
2747 ; vim:ft=dosini
2748 #+end_src
2749
2750 *** polybar-launch
2751 :PROPERTIES:
2752 :header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
2753 :END:
2754
2755 #+begin_src sh :tangle no
2756 # Terminate already running bar instances
2757 killall -q polybar
2758
2759 # Wait until the processes have been shut down
2760 while pgrep -x polybar >/dev/null; do sleep 1; done
2761
2762 # Launch main bar
2763 polybar main &
2764
2765 echo "Bars launched..."
2766 #+end_src
2767
2768 ** PowerTOP
2769 :PROPERTIES:
2770 :header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
2771 :END:
2772
2773 #+begin_src conf
2774 [Unit]
2775 Description=Powertop tunings
2776
2777 [Service]
2778 ExecStart=/usr/bin/powertop --auto-tune
2779 RemainAfterExit=true
2780
2781 [Install]
2782 WantedBy=multi-user.target
2783 #+end_src
2784
2785 ** ranger
2786
2787 *** rc.conf
2788 :PROPERTIES:
2789 :header-args+: :tangle ~/.config/ranger/rc.conf
2790 :END:
2791
2792 #+begin_src conf :tangle no
2793 # ===================================================================
2794 # This file contains the default startup commands for ranger.
2795 # To change them, it is recommended to create the file
2796 # ~/.config/ranger/rc.conf and add your custom commands there.
2797 #
2798 # If you copy this whole file there, you may want to set the environment
2799 # variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
2800 #
2801 # The purpose of this file is mainly to define keybindings and settings.
2802 # For running more complex python code, please create a plugin in "plugins/" or
2803 # a command in "commands.py".
2804 #
2805 # Each line is a command that will be run before the user interface
2806 # is initialized.  As a result, you can not use commands which rely
2807 # on the UI such as :delete or :mark.
2808 # ===================================================================
2809
2810 # ===================================================================
2811 # == Options
2812 # ===================================================================
2813
2814 # How many columns are there, and what are their relative widths?
2815 set column_ratios 1,3,4
2816
2817 # Which files should be hidden? (regular expression)
2818 set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
2819
2820 # Show hidden files? You can toggle this by typing 'zh'
2821 set show_hidden false
2822
2823 # Ask for a confirmation when running the "delete" command?
2824 # Valid values are "always" (default), "never", "multiple"
2825 # With "multiple", ranger will ask only if you delete multiple files at once.
2826 set confirm_on_delete multiple
2827
2828 # Which script is used to generate file previews?
2829 # ranger ships with scope.sh, a script that calls external programs (see
2830 # README for dependencies) to preview images, archives, etc.
2831 set preview_script ~/.config/ranger/scope.sh
2832
2833 # Use the external preview script or display simple plain text previews?
2834 set use_preview_script true
2835
2836 # Open all images in this directory when running certain image viewers
2837 # like feh or sxiv?  You can still open selected files by marking them.
2838 set open_all_images true
2839
2840 # Be aware of version control systems and display information.
2841 set vcs_aware false
2842
2843 # State of the three backends git, hg, bzr. The possible states are
2844 # disabled, local (only show local info), enabled (show local and remote
2845 # information).
2846 set vcs_backend_git enabled
2847 set vcs_backend_hg disabled
2848 set vcs_backend_bzr disabled
2849
2850 # Preview images in full color with the external command "w3mimgpreview"?
2851 # This requires the console web browser "w3m" and a supported terminal.
2852 # It has been successfully tested with "xterm" and "urxvt" without tmux.
2853 set preview_images true
2854
2855 # Use a unicode "..." character to mark cut-off filenames?
2856 set unicode_ellipsis false
2857
2858 # Show dotfiles in the bookmark preview box?
2859 set show_hidden_bookmarks true
2860
2861 # Which colorscheme to use?  These colorschemes are available by default:
2862 # default, jungle, snow
2863 set colorscheme default
2864
2865 # Preview files on the rightmost column?
2866 # And collapse (shrink) the last column if there is nothing to preview?
2867 set preview_files true
2868 set preview_directories true
2869 set collapse_preview true
2870
2871 # Save the console history on exit?
2872 set save_console_history true
2873
2874 # Draw the status bar on top of the browser window (default: bottom)
2875 set status_bar_on_top false
2876
2877 # Draw a progress bar in the status bar which displays the average state of all
2878 # currently running tasks which support progress bars?
2879 set draw_progress_bar_in_status_bar true
2880
2881 # Draw borders around columns?
2882 set draw_borders true
2883
2884 # Display the directory name in tabs?
2885 set dirname_in_tabs false
2886
2887 # Enable the mouse support?
2888 set mouse_enabled true
2889
2890 # Display the file size in the main column or status bar?
2891 set display_size_in_main_column true
2892 set display_size_in_status_bar true
2893
2894 # Display files tags in all columns or only in main column?
2895 set display_tags_in_all_columns true
2896
2897 # Set a title for the window?
2898 set update_title false
2899
2900 # Set the title to "ranger" in the tmux program?
2901 set update_tmux_title false
2902
2903 # Shorten the title if it gets long?  The number defines how many
2904 # directories are displayed at once, 0 turns off this feature.
2905 set shorten_title 3
2906
2907 # Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
2908 set tilde_in_titlebar false
2909
2910 # How many directory-changes or console-commands should be kept in history?
2911 set max_history_size 20
2912 set max_console_history_size 50
2913
2914 # Try to keep so much space between the top/bottom border when scrolling:
2915 set scroll_offset 8
2916
2917 # Flush the input after each key hit?  (Noticable when ranger lags)
2918 set flushinput true
2919
2920 # Padding on the right when there's no preview?
2921 # This allows you to click into the space to run the file.
2922 set padding_right true
2923
2924 # Save bookmarks (used with mX and `X) instantly?
2925 # This helps to synchronize bookmarks between multiple ranger
2926 # instances but leads to *slight* performance loss.
2927 # When false, bookmarks are saved when ranger is exited.
2928 set autosave_bookmarks true
2929
2930 # You can display the "real" cumulative size of directories by using the
2931 # command :get_cumulative_size or typing "dc".  The size is expensive to
2932 # calculate and will not be updated automatically.  You can choose
2933 # to update it automatically though by turning on this option:
2934 set autoupdate_cumulative_size false
2935
2936 # Turning this on makes sense for screen readers:
2937 set show_cursor false
2938
2939 # One of: size, basename, mtime, type
2940 set sort natural
2941
2942 # Additional sorting options
2943 set sort_reverse false
2944 set sort_case_insensitive true
2945 set sort_directories_first true
2946
2947 # Enable this if key combinations with the Alt Key don't work for you.
2948 # (Especially on xterm)
2949 set xterm_alt_key false
2950
2951 # ===================================================================
2952 # == Local Options
2953 # ===================================================================
2954 # You can set local options that only affect a single directory.
2955
2956 # Examples:
2957 # setlocal path=~/downloads sort mtime
2958
2959 # ===================================================================
2960 # == Command Aliases in the Console
2961 # ===================================================================
2962
2963 alias e    edit
2964 alias q    quit
2965 alias q!   quitall
2966 alias qall quitall
2967 alias setl setlocal
2968
2969 alias filter     scout -prt
2970 alias find       scout -aet
2971 alias mark       scout -mr
2972 alias unmark     scout -Mr
2973 alias search     scout -rs
2974 alias search_inc scout -rts
2975 alias travel     scout -aefiklst
2976
2977 # ===================================================================
2978 # == Define keys for the browser
2979 # ===================================================================
2980
2981 # Basic
2982 map     Q quit!
2983 map     q quit
2984 copymap q ZZ ZQ
2985
2986 map R     reload_cwd
2987 map <C-r> reset
2988 map <C-l> redraw_window
2989 map <C-c> abort
2990 map <esc> change_mode normal
2991
2992 map i display_file
2993 map ? help
2994 map W display_log
2995 map w taskview_open
2996 map S shell $SHELL
2997
2998 map :  console
2999 map ;  console
3000 map !  console shell
3001 map @  console -p6 shell  %%s
3002 map #  console shell -p
3003 map s  console shell
3004 map r  chain draw_possible_programs; console open_with
3005 map f  console find
3006 map cd console cd
3007
3008 # Tagging / Marking
3009 map t       tag_toggle
3010 map ut      tag_remove
3011 map "<any>  tag_toggle tag=%any
3012 map <Space> mark_files toggle=True
3013 map v       mark_files all=True toggle=True
3014 map uv      mark_files all=True val=False
3015 map V       toggle_visual_mode
3016 map uV      toggle_visual_mode reverse=True
3017
3018 # For the nostalgics: Midnight Commander bindings
3019 map <F1> help
3020 map <F3> display_file
3021 map <F4> edit
3022 map <F5> copy
3023 map <F6> cut
3024 map <F7> console mkdir
3025 map <F8> console delete
3026 map <F10> exit
3027
3028 # In case you work on a keyboard with dvorak layout
3029 map <UP>       move up=1
3030 map <DOWN>     move down=1
3031 map <LEFT>     move left=1
3032 map <RIGHT>    move right=1
3033 map <HOME>     move to=0
3034 map <END>      move to=-1
3035 map <PAGEDOWN> move down=1   pages=True
3036 map <PAGEUP>   move up=1     pages=True
3037 map <CR>       move right=1
3038 map <DELETE>   console delete
3039 map <INSERT>   console touch
3040
3041 # VIM-like
3042 copymap <UP>       k
3043 copymap <DOWN>     j
3044 copymap <LEFT>     h
3045 copymap <RIGHT>    l
3046 copymap <HOME>     gg
3047 copymap <END>      G
3048 copymap <PAGEDOWN> <C-F>
3049 copymap <PAGEUP>   <C-B>
3050
3051 map J  move down=0.5  pages=True
3052 map K  move up=0.5    pages=True
3053 copymap J <C-D>
3054 copymap K <C-U>
3055
3056 # Jumping around
3057 map H     history_go -1
3058 map L     history_go 1
3059 map ]     move_parent 1
3060 map [     move_parent -1
3061 map }     traverse
3062
3063 map gh cd ~
3064 map ge cd /etc
3065 map gu cd /usr
3066 map gd cd /dev
3067 map gl cd -r .
3068 map gL cd -r %f
3069 map go cd /opt
3070 map gv cd /var
3071 map gm cd /media
3072 map gM cd /mnt
3073 map gs cd /srv
3074 map gr cd /
3075 map gR eval fm.cd(ranger.RANGERDIR)
3076 map g/ cd /
3077 map g? cd /usr/share/doc/ranger
3078
3079 # External Programs
3080 map E  edit
3081 map du shell -p du --max-depth=1 -h --apparent-size
3082 map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
3083 map yp shell -d echo -n %d/%f | xsel -i
3084 map yd shell -d echo -n %d    | xsel -i
3085 map yn shell -d echo -n %f    | xsel -i
3086
3087 # Filesystem Operations
3088 map =  chmod
3089
3090 map cw console rename
3091 map A  eval fm.open_console('rename ' + fm.thisfile.basename)
3092 map I  eval fm.open_console('rename ' + fm.thisfile.basename, position=7)
3093
3094 map pp paste
3095 map po paste overwrite=True
3096 map pl paste_symlink relative=False
3097 map pL paste_symlink relative=True
3098 map phl paste_hardlink
3099 map pht paste_hardlinked_subtree
3100
3101 map dd cut
3102 map ud uncut
3103 map da cut mode=add
3104 map dr cut mode=remove
3105
3106 map yy copy
3107 map uy uncut
3108 map ya copy mode=add
3109 map yr copy mode=remove
3110
3111 # Temporary workarounds
3112 map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
3113 map dG  eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
3114 map dj  eval fm.cut(dirarg=dict(down=1), narg=quantifier)
3115 map dk  eval fm.cut(dirarg=dict(up=1), narg=quantifier)
3116 map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
3117 map yG  eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
3118 map yj  eval fm.copy(dirarg=dict(down=1), narg=quantifier)
3119 map yk  eval fm.copy(dirarg=dict(up=1), narg=quantifier)
3120
3121 # Searching
3122 map /  console search
3123 map n  search_next
3124 map N  search_next forward=False
3125 map ct search_next order=tag
3126 map cs search_next order=size
3127 map ci search_next order=mimetype
3128 map cc search_next order=ctime
3129 map cm search_next order=mtime
3130 map ca search_next order=atime
3131
3132 # Tabs
3133 map <C-n>     tab_new ~
3134 map <C-w>     tab_close
3135 map <TAB>     tab_move 1
3136 map <S-TAB>   tab_move -1
3137 map <A-Right> tab_move 1
3138 map <A-Left>  tab_move -1
3139 map gt        tab_move 1
3140 map gT        tab_move -1
3141 map gn        tab_new ~
3142 map gc        tab_close
3143 map uq        tab_restore
3144 map <a-1>     tab_open 1
3145 map <a-2>     tab_open 2
3146 map <a-3>     tab_open 3
3147 map <a-4>     tab_open 4
3148 map <a-5>     tab_open 5
3149 map <a-6>     tab_open 6
3150 map <a-7>     tab_open 7
3151 map <a-8>     tab_open 8
3152 map <a-9>     tab_open 9
3153
3154 # Sorting
3155 map or toggle_option sort_reverse
3156 map os chain set sort=size;      set sort_reverse=False
3157 map ob chain set sort=basename;  set sort_reverse=False
3158 map on chain set sort=natural;   set sort_reverse=False
3159 map om chain set sort=mtime;     set sort_reverse=False
3160 map oc chain set sort=ctime;     set sort_reverse=False
3161 map oa chain set sort=atime;     set sort_reverse=False
3162 map ot chain set sort=type;      set sort_reverse=False
3163
3164 map oS chain set sort=size;      set sort_reverse=True
3165 map oB chain set sort=basename;  set sort_reverse=True
3166 map oN chain set sort=natural;   set sort_reverse=True
3167 map oM chain set sort=mtime;     set sort_reverse=True
3168 map oC chain set sort=ctime;     set sort_reverse=True
3169 map oA chain set sort=atime;     set sort_reverse=True
3170 map oT chain set sort=type;      set sort_reverse=True
3171
3172 map dc get_cumulative_size
3173
3174 # Settings
3175 map zc    toggle_option collapse_preview
3176 map zd    toggle_option sort_directories_first
3177 map zh    toggle_option show_hidden
3178 map <C-h> toggle_option show_hidden
3179 map zi    toggle_option flushinput
3180 map zm    toggle_option mouse_enabled
3181 map zp    toggle_option preview_files
3182 map zP    toggle_option preview_directories
3183 map zs    toggle_option sort_case_insensitive
3184 map zu    toggle_option autoupdate_cumulative_size
3185 map zv    toggle_option use_preview_script
3186 map zf    console filter
3187
3188 # Bookmarks
3189 map `<any>  enter_bookmark %any
3190 map '<any>  enter_bookmark %any
3191 map m<any>  set_bookmark %any
3192 map um<any> unset_bookmark %any
3193
3194 map m<bg>   draw_bookmarks
3195 copymap m<bg>  um<bg> `<bg> '<bg>
3196
3197 # Generate all the chmod bindings with some python help:
3198 eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
3199 eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
3200 eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
3201 eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
3202 eval for arg in "rwxXst": cmd("map +{0}  shell -d chmod u+{0} %s".format(arg))
3203
3204 eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
3205 eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
3206 eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
3207 eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
3208 eval for arg in "rwxXst": cmd("map -{0}  shell -d chmod u-{0} %s".format(arg))
3209
3210 # ===================================================================
3211 # == Define keys for the console
3212 # ===================================================================
3213 # Note: Unmapped keys are passed directly to the console.
3214
3215 # Basic
3216 cmap <tab>   eval fm.ui.console.tab()
3217 cmap <s-tab> eval fm.ui.console.tab(-1)
3218 cmap <ESC>   eval fm.ui.console.close()
3219 cmap <CR>    eval fm.ui.console.execute()
3220 cmap <C-l>   redraw_window
3221
3222 copycmap <ESC> <C-c>
3223 copycmap <CR>  <C-j>
3224
3225 # Move around
3226 cmap <up>    eval fm.ui.console.history_move(-1)
3227 cmap <down>  eval fm.ui.console.history_move(1)
3228 cmap <left>  eval fm.ui.console.move(left=1)
3229 cmap <right> eval fm.ui.console.move(right=1)
3230 cmap <home>  eval fm.ui.console.move(right=0, absolute=True)
3231 cmap <end>   eval fm.ui.console.move(right=-1, absolute=True)
3232
3233 # Line Editing
3234 cmap <backspace>  eval fm.ui.console.delete(-1)
3235 cmap <delete>     eval fm.ui.console.delete(0)
3236 cmap <C-w>        eval fm.ui.console.delete_word()
3237 cmap <C-k>        eval fm.ui.console.delete_rest(1)
3238 cmap <C-u>        eval fm.ui.console.delete_rest(-1)
3239 cmap <C-y>        eval fm.ui.console.paste()
3240
3241 # And of course the emacs way
3242 copycmap <up>        <C-p>
3243 copycmap <down>      <C-n>
3244 copycmap <left>      <C-b>
3245 copycmap <right>     <C-f>
3246 copycmap <home>      <C-a>
3247 copycmap <end>       <C-e>
3248 copycmap <delete>    <C-d>
3249 copycmap <backspace> <C-h>
3250
3251 # Note: There are multiple ways to express backspaces.  <backspace> (code 263)
3252 # and <backspace2> (code 127).  To be sure, use both.
3253 copycmap <backspace> <backspace2>
3254
3255 # This special expression allows typing in numerals:
3256 cmap <allow_quantifiers> false
3257
3258 # ===================================================================
3259 # == Pager Keybindings
3260 # ===================================================================
3261
3262 # Movement
3263 pmap  <down>      pager_move  down=1
3264 pmap  <up>        pager_move  up=1
3265 pmap  <left>      pager_move  left=4
3266 pmap  <right>     pager_move  right=4
3267 pmap  <home>      pager_move  to=0
3268 pmap  <end>       pager_move  to=-1
3269 pmap  <pagedown>  pager_move  down=1.0  pages=True
3270 pmap  <pageup>    pager_move  up=1.0    pages=True
3271 pmap  <C-d>       pager_move  down=0.5  pages=True
3272 pmap  <C-u>       pager_move  up=0.5    pages=True
3273
3274 copypmap <UP>       k  <C-p>
3275 copypmap <DOWN>     j  <C-n> <CR>
3276 copypmap <LEFT>     h
3277 copypmap <RIGHT>    l
3278 copypmap <HOME>     g
3279 copypmap <END>      G
3280 copypmap <C-d>      d
3281 copypmap <C-u>      u
3282 copypmap <PAGEDOWN> n  f  <C-F>  <Space>
3283 copypmap <PAGEUP>   p  b  <C-B>
3284
3285 # Basic
3286 pmap     <ESC> pager_close
3287 copypmap <ESC> q Q i <F3>
3288 pmap E      edit_file
3289
3290 # ===================================================================
3291 # == Taskview Keybindings
3292 # ===================================================================
3293
3294 # Movement
3295 tmap <up>        taskview_move up=1
3296 tmap <down>      taskview_move down=1
3297 tmap <home>      taskview_move to=0
3298 tmap <end>       taskview_move to=-1
3299 tmap <pagedown>  taskview_move down=1.0  pages=True
3300 tmap <pageup>    taskview_move up=1.0    pages=True
3301 tmap <C-d>       taskview_move down=0.5  pages=True
3302 tmap <C-u>       taskview_move up=0.5    pages=True
3303
3304 copytmap <UP>       k  <C-p>
3305 copytmap <DOWN>     j  <C-n> <CR>
3306 copytmap <HOME>     g
3307 copytmap <END>      G
3308 copytmap <C-u>      u
3309 copytmap <PAGEDOWN> n  f  <C-F>  <Space>
3310 copytmap <PAGEUP>   p  b  <C-B>
3311
3312 # Changing priority and deleting tasks
3313 tmap J          eval -q fm.ui.taskview.task_move(-1)
3314 tmap K          eval -q fm.ui.taskview.task_move(0)
3315 tmap dd         eval -q fm.ui.taskview.task_remove()
3316 tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
3317 tmap <pageup>   eval -q fm.ui.taskview.task_move(0)
3318 tmap <delete>   eval -q fm.ui.taskview.task_remove()
3319
3320 # Basic
3321 tmap <ESC> taskview_close
3322 copytmap <ESC> q Q w <C-c>
3323 #+end_src
3324
3325 *** scope.sh
3326 :PROPERTIES:
3327 :header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
3328 :END:
3329
3330 #+begin_src sh :tangle no
3331 # ranger supports enhanced previews.  If the option "use_preview_script"
3332 # is set to True and this file exists, this script will be called and its
3333 # output is displayed in ranger.  ANSI color codes are supported.
3334
3335 # NOTES: This script is considered a configuration file.  If you upgrade
3336 # ranger, it will be left untouched. (You must update it yourself.)
3337 # Also, ranger disables STDIN here, so interactive scripts won't work properly
3338
3339 # Meanings of exit codes:
3340 # code | meaning    | action of ranger
3341 # -----+------------+-------------------------------------------
3342 # 0    | success    | success. display stdout as preview
3343 # 1    | no preview | failure. display no preview at all
3344 # 2    | plain text | display the plain content of the file
3345 # 3    | fix width  | success. Don't reload when width changes
3346 # 4    | fix height | success. Don't reload when height changes
3347 # 5    | fix both   | success. Don't ever reload
3348
3349 # Meaningful aliases for arguments:
3350 path="$1"    # Full path of the selected file
3351 width="$2"   # Width of the preview pane (number of fitting characters)
3352 height="$3"  # Height of the preview pane (number of fitting characters)
3353
3354 maxln=200    # Stop after $maxln lines.  Can be used like ls | head -n $maxln
3355
3356 # Find out something about the file:
3357 mimetype=$(file --mime-type -Lb "$path")
3358 extension=${path##*.}
3359
3360 # Functions:
3361 # runs a command and saves its output into $output.  Useful if you need
3362 # the return value AND want to use the output in a pipe
3363 try() { output=$(eval '"$@"'); }
3364
3365 # writes the output of the previouosly used "try" command
3366 dump() { echo "$output"; }
3367
3368 # a common post-processing function used after most commands
3369 trim() { head -n "$maxln"; }
3370
3371 # wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
3372 highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }
3373
3374 case "$extension" in
3375     # Archive extensions:
3376     7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
3377     rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
3378         try als "$path" && { dump | trim; exit 0; }
3379         try acat "$path" && { dump | trim; exit 3; }
3380         try bsdtar -lf "$path" && { dump | trim; exit 0; }
3381         exit 1;;
3382     rar)
3383         try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
3384     # PDF documents:
3385     pdf)
3386         try pdftotext -l 10 -nopgbrk -q "$path" - && \
3387             { dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
3388     # BitTorrent Files
3389     torrent)
3390         try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
3391     # HTML Pages:
3392     htm|html|xhtml)
3393         try w3m    -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3394         try lynx   -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3395         try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3396         ;; # fall back to highlight/cat if the text browsers fail
3397 esac
3398
3399 case "$mimetype" in
3400     # Syntax highlight for text files:
3401     text/* | */xml)
3402         try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
3403     # Ascii-previews of images:
3404     image/*)
3405         img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
3406     # Display information about media files:
3407     video/* | audio/*)
3408         exiftool "$path" && exit 5
3409         # Use sed to remove spaces so the output fits into the narrow window
3410         try mediainfo "$path" && { dump | trim | sed 's/  \+:/: /;';  exit 5; } || exit 1;;
3411 esac
3412
3413 exit 1
3414 #+end_src
3415
3416 ** redshift
3417 :PROPERTIES:
3418 :header-args+: :tangle ~/.config/redshift.conf :comments none
3419 :END:
3420
3421 #+begin_src conf
3422 ; Global settings for redshift
3423 [redshift]
3424 ; Set the day and night screen temperatures (Neutral is 6500K)
3425 ;temp-day=5700
3426 ;temp-night=3500
3427
3428 ;temp-day=6500
3429 temp-day=6200
3430 ;temp-night=4800
3431 ;temp-night=5000
3432 ;temp-night=4500
3433 temp-night=4000
3434
3435 ; Enable/Disable a smooth transition between day and night
3436 ; 0 will cause a direct change from day to night screen temperature.
3437 ; 1 will gradually increase or decrease the screen temperature.
3438 transition=1
3439
3440 ; Set the screen brightness. Default is 1.0.
3441 ;brightness=0.9
3442 ; It is also possible to use different settings for day and night
3443 ; since version 1.8.
3444 ;brightness-day=0.7
3445 ;brightness-night=0.4
3446 ; Set the screen gamma (for all colors, or each color channel
3447 ; individually)
3448 ;gamma=0.8
3449 ;gamma=1.0
3450 ;gamma=0.8:0.7:0.8
3451 ; This can also be set individually for day and night since
3452 ; version 1.10.
3453 ;gamma-day=0.8:0.7:0.8
3454 ;gamma-night=0.6
3455
3456 ; Set the location-provider: 'geoclue2' or 'manual'
3457 ; type 'redshift -l list' to see possible values.
3458 ; The location provider settings are in a different section.
3459 ;location-provider=manual
3460 location-provider=geoclue2
3461
3462 ; Set the adjustment-method: 'randr', 'vidmode'
3463 ; type 'redshift -m list' to see all possible values.
3464 ; 'randr' is the preferred method, 'vidmode' is an older API.
3465 ; but works in some cases when 'randr' does not.
3466 ; The adjustment method settings are in a different section.
3467 adjustment-method=randr
3468
3469 ; Configuration of the location-provider:
3470 ; type 'redshift -l PROVIDER:help' to see the settings.
3471 ; ex: 'redshift -l manual:help'
3472 ; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
3473 ; are negative numbers.
3474 ;[manual]
3475 ;lat=48.1
3476 ;lon=11.6
3477
3478 ; Configuration of the adjustment-method
3479 ; type 'redshift -m METHOD:help' to see the settings.
3480 ; ex: 'redshift -m randr:help'
3481 ; In this example, randr is configured to adjust screen 1.
3482 ; Note that the numbering starts from 0, so this is actually the
3483 ; second screen. If this option is not specified, Redshift will try
3484 ; to adjust _all_ screens.
3485 ;[randr]
3486 ;screen=1
3487 #+end_src
3488
3489 ** rofi
3490 :PROPERTIES:
3491 :header-args+: :tangle ~/.config/rofi/config
3492 :END:
3493
3494 #+begin_src conf
3495 rofi.font: Ubuntu Mono 13
3496 ! rofi.font: Inconsolata 16
3497 ! rofi.font: Iosevka 13
3498 ! rofi.font: Source Code Pro 11
3499 rofi.modi: run,window
3500 ! rofi.width: 640
3501 rofi.width: 600
3502 !rofi.location: 2
3503 !rofi.yoffset: 200
3504 rofi.monitor: -1
3505 !rofi.lines: 10
3506
3507 !rofi.theme: /usr/share/rofi/themes//Arc.rasi
3508 !rofi.theme: /usr/share/rofi/themes//Paper.rasi
3509 !rofi.theme: /usr/share/rofi/themes//sidebar.rasi
3510
3511 rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
3512 #+end_src
3513
3514 ** rofi-pass
3515 :PROPERTIES:
3516 :header-args+: :tangle ~/.config/rofi-pass/config
3517 :END:
3518
3519 #+begin_src conf
3520 # permanently set alternative root dir
3521 # root=/path/to/root
3522
3523 # rofi command. Make sure to have "$@" as last argument
3524 _rofi () {
3525     #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
3526     rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
3527 }
3528
3529 # xdotool needs the keyboard layout to be set using setxkbmap
3530 # You can do this in your autostart scripts (e.g. xinitrc)
3531
3532 # If for some reason, you cannot do this, you can set the command here.
3533 # and set fix_layout to true
3534 fix_layout=false
3535
3536 layout_cmd () {
3537   setxkbmap us
3538 }
3539
3540 # fields to be used
3541 URL_field='url'
3542 USERNAME_field='user'
3543 AUTOTYPE_field='autotype'
3544
3545 # delay to be used for :delay keyword
3546 delay=2
3547
3548 ## Programs to be used
3549 # Editor
3550 EDITOR='gvim -f'
3551
3552 # Browser
3553 BROWSER='chromium'
3554
3555 ## Misc settings
3556
3557 default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
3558 auto_enter='false'
3559 notify='false'
3560 default_autotype='user :tab pass'
3561
3562 # color of the help messages
3563 # leave empty for autodetection
3564 help_color="#4872FF"
3565
3566 # Clipboard settings
3567 # Possible options: primary, clipboard, both
3568 clip=primary
3569
3570 # Options for generating new password entries
3571 # default_user is also used for password files that have no user field.
3572 default_user=aminb
3573 default_user2=aminban
3574 password_length=30
3575
3576 # Custom Keybindings
3577 #autotype="Alt+1"
3578 autotype="Alt+m"
3579 type_user="Alt+2"
3580 type_pass="Alt+3"
3581 open_url="Alt+4"
3582 copy_name="Alt+u"
3583 copy_url="Alt+l"
3584 copy_pass="Alt+p"
3585 show="Alt+o"
3586 copy_entry="Alt+2"
3587 type_entry="Alt+1"
3588 copy_menu="Alt+c"
3589 action_menu="Alt+a"
3590 type_menu="Alt+t"
3591 help="Alt+h"
3592 switch="Alt+x"
3593 insert_pass="Alt+n"
3594 #+end_src
3595
3596 ** TLP
3597
3598 *** TODO enigma
3599 *** plasma
3600
3601 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/default/tlp")
3602 # ------------------------------------------------------------------------------
3603 # tlp - Parameters for power saving
3604 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
3605
3606 # Hint: some features are disabled by default, remove the leading # to enable
3607 # them.
3608
3609 # Set to 0 to disable, 1 to enable TLP.
3610 TLP_ENABLE=1
3611
3612 # Operation mode when no power supply can be detected: AC, BAT.
3613 # Concerns some desktop and embedded hardware only.
3614 TLP_DEFAULT_MODE=AC
3615
3616 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
3617 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
3618 TLP_PERSISTENT_DEFAULT=0
3619
3620 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
3621 # Non-zero value enables, zero disables laptop mode.
3622 DISK_IDLE_SECS_ON_AC=0
3623 DISK_IDLE_SECS_ON_BAT=2
3624
3625 # Dirty page values (timeouts in secs).
3626 MAX_LOST_WORK_SECS_ON_AC=15
3627 MAX_LOST_WORK_SECS_ON_BAT=60
3628
3629 # Hint: CPU parameters below are disabled by default, remove the leading #
3630 # to enable them, otherwise kernel default values are used.
3631
3632 # Select a CPU frequency scaling governor.
3633 # Intel Core i processor with intel_pstate driver:
3634 #   powersave(*), performance.
3635 # Older hardware with acpi-cpufreq driver:
3636 #   ondemand(*), powersave, performance, conservative, schedutil.
3637 # (*) is recommended.
3638 # Hint: use tlp-stat -p to show the active driver and available governors.
3639 # Important:
3640 #   powersave for intel_pstate and ondemand for acpi-cpufreq are power
3641 #   efficient for *almost all* workloads and therefore kernel and most
3642 #   distributions have chosen them as defaults. If you still want to change,
3643 #   you should know what you're doing! You *must* disable your distribution's
3644 #   governor settings or conflicts will occur.
3645 #CPU_SCALING_GOVERNOR_ON_AC=powersave
3646 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
3647
3648 # Set the min/max frequency available for the scaling governor.
3649 # Possible values strongly depend on your CPU. For available frequencies see
3650 # the output of tlp-stat -p.
3651 #CPU_SCALING_MIN_FREQ_ON_AC=0
3652 #CPU_SCALING_MAX_FREQ_ON_AC=0
3653 #CPU_SCALING_MIN_FREQ_ON_BAT=0
3654 #CPU_SCALING_MAX_FREQ_ON_BAT=0
3655
3656 # Set energy performance hints (HWP) for Intel P-state governor:
3657 #   performance, balance_performance, default, balance_power, power
3658 # Values are given in order of increasing power saving.
3659 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
3660 CPU_HWP_ON_AC=balance_performance
3661 CPU_HWP_ON_BAT=balance_power
3662
3663 # Set Intel P-state performance: 0..100 (%).
3664 # Limit the max/min P-state to control the power dissipation of the CPU.
3665 # Values are stated as a percentage of the available performance.
3666 # Requires an Intel Core i processor with intel_pstate driver.
3667 #CPU_MIN_PERF_ON_AC=0
3668 #CPU_MAX_PERF_ON_AC=100
3669 #CPU_MIN_PERF_ON_BAT=0
3670 #CPU_MAX_PERF_ON_BAT=30
3671
3672 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
3673 # Requires an Intel Core i processor.
3674 # Important:
3675 # - This may conflict with your distribution's governor settings
3676 # - A value of 1 does *not* activate boosting, it just allows it
3677 #CPU_BOOST_ON_AC=1
3678 #CPU_BOOST_ON_BAT=0
3679
3680 # Minimize number of used CPU cores/hyper-threads under light load conditions:
3681 #   0=disable, 1=enable.
3682 SCHED_POWERSAVE_ON_AC=0
3683 SCHED_POWERSAVE_ON_BAT=1
3684
3685 # Kernel NMI Watchdog:
3686 #   0=disable (default, saves power), 1=enable (for kernel debugging only).
3687 NMI_WATCHDOG=0
3688
3689 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
3690 # Frequency voltage pairs are written to:
3691 #   /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
3692 # CAUTION: only use this, if you thoroughly understand what you are doing!
3693 #PHC_CONTROLS="F:V F:V F:V F:V"
3694
3695 # Set CPU performance versus energy savings policy:
3696 #   performance, balance-performance, default, balance-power, power.
3697 # Values are given in order of increasing power saving.
3698 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
3699 ENERGY_PERF_POLICY_ON_AC=performance
3700 ENERGY_PERF_POLICY_ON_BAT=balance-power
3701
3702 # Disk devices; separate multiple devices with spaces (default: sda).
3703 # Devices can be specified by disk ID also (lookup with: tlp diskid).
3704 DISK_DEVICES="sda sdb"
3705
3706 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
3707 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
3708 # Separate values for multiple disks with spaces. Use the special value 'keep'
3709 # to keep the hardware default for the particular disk.
3710 DISK_APM_LEVEL_ON_AC="254 254"
3711 DISK_APM_LEVEL_ON_BAT="128 128"
3712
3713 # Hard disk spin down timeout:
3714 #   0:        spin down disabled
3715 #   1..240:   timeouts from 5s to 20min (in units of 5s)
3716 #   241..251: timeouts from 30min to 5.5 hours (in units of 30min)
3717 # See 'man hdparm' for details.
3718 # Separate values for multiple disks with spaces. Use the special value 'keep'
3719 # to keep the hardware default for the particular disk.
3720 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
3721 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
3722
3723 # Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
3724 # Separate values for multiple disks with spaces. Use the special value 'keep'
3725 # to keep the kernel default scheduler for the particular disk.
3726 #DISK_IOSCHED="cfq cfq"
3727
3728 # AHCI link power management (ALPM) for disk devices:
3729 #   min_power, med_power_with_dipm(*), medium_power, max_performance.
3730 # (*) Kernel >= 4.15 required, then recommended.
3731 # Multiple values separated with spaces are tried sequentially until success.
3732 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
3733 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
3734
3735 # Exclude host devices from AHCI link power management.
3736 # Separate multiple hosts with spaces.
3737 #SATA_LINKPWR_BLACKLIST="host1"
3738
3739 # Runtime Power Management for AHCI host and disks devices:
3740 #   on=disable, auto=enable.
3741 # EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
3742 #AHCI_RUNTIME_PM_ON_AC=on
3743 #AHCI_RUNTIME_PM_ON_BAT=on
3744
3745 # Seconds of inactivity before disk is suspended.
3746 AHCI_RUNTIME_PM_TIMEOUT=15
3747
3748 # PCI Express Active State Power Management (PCIe ASPM):
3749 #   default, performance, powersave.
3750 PCIE_ASPM_ON_AC=performance
3751 PCIE_ASPM_ON_BAT=powersave
3752
3753 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
3754 # auto = mid on BAT, high on AC; default = use hardware defaults.
3755 RADEON_POWER_PROFILE_ON_AC=high
3756 RADEON_POWER_PROFILE_ON_BAT=low
3757
3758 # Radeon dynamic power management method (DPM): battery, performance.
3759 RADEON_DPM_STATE_ON_AC=performance
3760 RADEON_DPM_STATE_ON_BAT=battery
3761
3762 # Radeon DPM performance level: auto, low, high; auto is recommended.
3763 RADEON_DPM_PERF_LEVEL_ON_AC=auto
3764 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
3765
3766 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
3767 WIFI_PWR_ON_AC=off
3768 WIFI_PWR_ON_BAT=on
3769
3770 # Disable wake on LAN: Y/N.
3771 WOL_DISABLE=Y
3772
3773 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
3774 # A value of 0 disables, >=1 enables power saving (recommended: 1).
3775 SOUND_POWER_SAVE_ON_AC=0
3776 SOUND_POWER_SAVE_ON_BAT=0
3777
3778 # Disable controller too (HDA only): Y/N.
3779 SOUND_POWER_SAVE_CONTROLLER=N
3780
3781 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
3782 # Drive can be powered on again by releasing (and reinserting) the eject lever
3783 # or by pressing the disc eject button on newer models.
3784 # Note: an UltraBay/MediaBay hard disk is never powered off.
3785 BAY_POWEROFF_ON_AC=0
3786 BAY_POWEROFF_ON_BAT=0
3787 # Optical drive device to power off (default sr0).
3788 BAY_DEVICE="sr0"
3789
3790 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
3791 RUNTIME_PM_ON_AC=on
3792 RUNTIME_PM_ON_BAT=auto
3793
3794 # Exclude PCI(e) device adresses the following list from Runtime PM
3795 # (separate with spaces). Use lspci to get the adresses (1st column).
3796 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
3797 RUNTIME_PM_BLACKLIST="01:00.0"
3798
3799 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
3800 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
3801 # prevents accidential power-on of dGPU in hybrid graphics setups.
3802 # Use "" to disable the feature completely.
3803 # Separate multiple drivers with spaces.
3804 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
3805
3806 # Set to 0 to disable, 1 to enable USB autosuspend feature.
3807 USB_AUTOSUSPEND=1
3808
3809 # Exclude listed devices from USB autosuspend (separate with spaces).
3810 # Use lsusb to get the ids.
3811 # Note: input devices (usbhid) are excluded automatically
3812 #USB_BLACKLIST="1111:2222 3333:4444"
3813
3814 # Bluetooth devices are excluded from USB autosuspend:
3815 #   0=do not exclude, 1=exclude.
3816 USB_BLACKLIST_BTUSB=0
3817
3818 # Phone devices are excluded from USB autosuspend:
3819 #   0=do not exclude, 1=exclude (enable charging).
3820 USB_BLACKLIST_PHONE=0
3821
3822 # Printers are excluded from USB autosuspend:
3823 #   0=do not exclude, 1=exclude.
3824 USB_BLACKLIST_PRINTER=1
3825
3826 # WWAN devices are excluded from USB autosuspend:
3827 #   0=do not exclude, 1=exclude.
3828 USB_BLACKLIST_WWAN=1
3829
3830 # Include listed devices into USB autosuspend even if already excluded
3831 # by the blacklists above (separate with spaces).
3832 # Use lsusb to get the ids.
3833 #USB_WHITELIST="1111:2222 3333:4444"
3834
3835 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
3836 # (workaround for USB devices that cause shutdown problems).
3837 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
3838
3839 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
3840 # on system startup: 0=disable, 1=enable.
3841 # Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
3842 #   are ignored when this is enabled!
3843 #RESTORE_DEVICE_STATE_ON_STARTUP=0
3844 RESTORE_DEVICE_STATE_ON_STARTUP=1
3845
3846 # Radio devices to disable on startup: bluetooth, wifi, wwan.
3847 # Separate multiple devices with spaces.
3848 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
3849
3850 # Radio devices to enable on startup: bluetooth, wifi, wwan.
3851 # Separate multiple devices with spaces.
3852 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
3853
3854 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
3855 # (workaround for devices that are blocking shutdown).
3856 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
3857
3858 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
3859 # (to prevent other operating systems from missing radios).
3860 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
3861
3862 # Radio devices to enable on AC: bluetooth, wifi, wwan.
3863 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
3864
3865 # Radio devices to disable on battery: bluetooth, wifi, wwan.
3866 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
3867
3868 # Radio devices to disable on battery when not in use (not connected):
3869 #   bluetooth, wifi, wwan.
3870 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
3871
3872 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
3873 # required). Charging starts when the remaining capacity falls below the
3874 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
3875 # Main / Internal battery (values in %)
3876 #START_CHARGE_THRESH_BAT0=75
3877 #STOP_CHARGE_THRESH_BAT0=80
3878 # Ultrabay / Slice / Replaceable battery (values in %)
3879 #START_CHARGE_THRESH_BAT1=75
3880 #STOP_CHARGE_THRESH_BAT1=80
3881
3882 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
3883 #RESTORE_THRESHOLDS_ON_BAT=1
3884
3885 # ------------------------------------------------------------------------------
3886 # tlp-rdw - Parameters for the radio device wizard
3887 # Possible devices: bluetooth, wifi, wwan.
3888
3889 # Hints:
3890 # - Parameters are disabled by default, remove the leading # to enable them
3891 # - Separate multiple radio devices with spaces
3892
3893 # Radio devices to disable on connect.
3894 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
3895 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
3896 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
3897
3898 # Radio devices to enable on disconnect.
3899 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
3900 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
3901 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
3902
3903 # Radio devices to enable/disable when docked.
3904 #DEVICES_TO_ENABLE_ON_DOCK=""
3905 #DEVICES_TO_DISABLE_ON_DOCK=""
3906
3907 # Radio devices to enable/disable when undocked.
3908 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
3909 #DEVICES_TO_DISABLE_ON_UNDOCK=""
3910 #+end_src
3911
3912 ** X
3913
3914 *** xprofile
3915 :PROPERTIES:
3916 :header-args+: :tangle ~/.xprofile
3917 :END:
3918
3919 =~/.xprofile= is similar in style to =~/.xinitrc=, but on the
3920 contrary, it's automatically sourced by LightDM, my display manager of
3921 choice.
3922
3923 #+begin_src sh
3924 xset -b  # disable bell
3925 xset r rate 200 45  # repeat delay (ms) and rate (repeats/sec)
3926
3927 # setxkbmap -option compose:ralt
3928
3929 setxkbmap -option ctrl:nocaps          # turn capslock into control
3930 setxkbmap -option altwin:swap_alt_win  # swap alt and super
3931
3932 if [ $(hostname) = "plasma" ]
3933 then
3934     setxkbmap -option ctrl:rctrl_ralt  # turn right control into right alt
3935 fi
3936
3937 if [ $(hostname) = "enigma" ]
3938 then
3939     xmodmap -e "keycode 135 = Alt_R"  # remap menu key to alt
3940 fi
3941
3942 light -Scrs "intel_backlight" 2
3943
3944 source $HOME/.zprofile
3945
3946 export _JAVA_AWT_WM_NONREPARENTING=1
3947 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
3948
3949 if [ $(hostname) = "plasma" ]
3950 then
3951     unlock-def-gk.py &
3952 fi
3953
3954 bspwm &
3955 #+end_src
3956
3957 *** X resources
3958
3959 **** Xresources
3960 :PROPERTIES:
3961 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
3962 :END:
3963
3964 #+begin_src conf-xdefaults
3965 #include ".Xresources.d/fonts"
3966 ! #include ".Xresources.d/colors"
3967 #include ".Xresources.d/emacs"
3968 #include ".Xresources.d/rxvt-unicode"
3969 #+end_src
3970
3971 **** Xresources.d
3972
3973 ***** fonts
3974 :PROPERTIES:
3975 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
3976 :END:
3977
3978 #+begin_src conf-xdefaults
3979 Xft.lcdfilter: lcddefault
3980 Xft.antialias: true
3981 Xft.autohint: 0
3982 Xft.hinting: true
3983 Xft.hintstyle: hintslight
3984 ! Xft.hintstyle: hintfull
3985 Xft.rgba: rgb
3986 Xft.dpi: 96
3987 #+end_src
3988
3989 ***** colors
3990 :PROPERTIES:
3991 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
3992 :END:
3993
3994 #+begin_src conf-xdefaults :tangle no
3995 #include "gruvbox-light.xresources"
3996 ! #include "gruvbox-dark.xresources"
3997 #include "gruvbox-urxvt256.xresources"
3998 #+end_src
3999
4000 #+begin_src conf-xdefaults :tangle no
4001 ! -----------------------------------------------------------------------------
4002 ! File: gruvbox-light.xresources
4003 ! Description: Retro groove colorscheme generalized
4004 ! Author: morhetz <morhetz@gmail.com>
4005 ! Source: https://github.com/morhetz/gruvbox-generalized
4006 ! Last Modified: 6 Sep 2014
4007 ! -----------------------------------------------------------------------------
4008
4009 ! hard contrast: *background: #f9f5d7
4010 *background: #fbf1c7
4011 ! soft contrast: *background: #f2e5bc
4012 *foreground: #3c3836
4013 ! Black + DarkGrey
4014 *color0:  #fdf4c1
4015 *color8:  #928374
4016 ! DarkRed + Red
4017 *color1:  #cc241d
4018 *color9:  #9d0006
4019 ! DarkGreen + Green
4020 *color2:  #98971a
4021 *color10: #79740e
4022 ! DarkYellow + Yellow
4023 *color3:  #d79921
4024 *color11: #b57614
4025 ! DarkBlue + Blue
4026 *color4:  #458588
4027 *color12: #076678
4028 ! DarkMagenta + Magenta
4029 *color5:  #b16286
4030 *color13: #8f3f71
4031 ! DarkCyan + Cyan
4032 *color6:  #689d6a
4033 *color14: #427b58
4034 ! LightGrey + White
4035 *color7:  #7c6f64
4036 *color15: #3c3836
4037 #+end_src
4038
4039 #+begin_src conf-xdefaults :tangle no
4040 ! -----------------------------------------------------------------------------
4041 ! File: gruvbox-dark.xresources
4042 ! Description: Retro groove colorscheme generalized
4043 ! Author: morhetz <morhetz@gmail.com>
4044 ! Source: https://github.com/morhetz/gruvbox-generalized
4045 ! Last Modified: 6 Sep 2014
4046 ! -----------------------------------------------------------------------------
4047
4048 ! hard contrast: *background: #1d2021
4049 *background: #282828
4050 ! soft contrast: *background: #32302f
4051 *foreground: #ebdbb2
4052 ! Black + DarkGrey
4053 *color0:  #282828
4054 *color8:  #928374
4055 ! DarkRed + Red
4056 *color1:  #cc241d
4057 *color9:  #fb4934
4058 ! DarkGreen + Green
4059 *color2:  #98971a
4060 *color10: #b8bb26
4061 ! DarkYellow + Yellow
4062 *color3:  #d79921
4063 *color11: #fabd2f
4064 ! DarkBlue + Blue
4065 *color4:  #458588
4066 *color12: #83a598
4067 ! DarkMagenta + Magenta
4068 *color5:  #b16286
4069 *color13: #d3869b
4070 ! DarkCyan + Cyan
4071 *color6:  #689d6a
4072 *color14: #8ec07c
4073 ! LightGrey + White
4074 *color7:  #a89984
4075 *color15: #ebdbb2
4076 #+end_src
4077
4078 #+begin_src conf-xdefaults :tangle no
4079 ! -----------------------------------------------------------------------------
4080 ! File: gruvbox-urxvt256.xresources
4081 ! Description: Retro groove colorscheme generalized
4082 ! Author: morhetz <morhetz@gmail.com>
4083 ! Source: https://github.com/morhetz/gruvbox-generalized
4084 ! Last Modified: 13 Dec 2013
4085 ! -----------------------------------------------------------------------------
4086
4087 URxvt.color24:  #076678
4088 URxvt.color66:  #427b58
4089 URxvt.color88:  #9d0006
4090 URxvt.color96:  #8f3f71
4091 URxvt.color100: #79740e
4092 URxvt.color108: #8ec07c
4093 URxvt.color109: #83a598
4094 URxvt.color130: #af3a03
4095 URxvt.color136: #b57614
4096 URxvt.color142: #b8bb26
4097 URxvt.color167: #fb4934
4098 URxvt.color175: #d3869b
4099 URxvt.color208: #fe8019
4100 URxvt.color214: #fabd2f
4101 URxvt.color223: #ebdbb2
4102 URxvt.color228: #f2e5bc
4103 URxvt.color229: #fbf1c7
4104 URxvt.color230: #f9f5d7
4105 URxvt.color234: #1d2021
4106 URxvt.color235: #282828
4107 URxvt.color236: #32302f
4108 URxvt.color237: #3c3836
4109 URxvt.color239: #504945
4110 URxvt.color241: #665c54
4111 URxvt.color243: #7c6f64
4112 URxvt.color244: #928374
4113 URxvt.color245: #928374
4114 URxvt.color246: #a89984
4115 URxvt.color248: #bdae93
4116 URxvt.color250: #d5c4a1
4117 #+end_src
4118
4119 ***** emacs
4120 :PROPERTIES:
4121 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
4122 :END:
4123
4124 #+begin_src conf-xdefaults
4125 Emacs.menuBar: off
4126 Emacs.toolBar: off
4127 Emacs.verticalScrollBars: off
4128 Emacs.cursorBlink: off
4129 Emacs.FontBackend: xft,x
4130 ! Emacs.font: Ubuntu Mono-12
4131 ! Emacs.font: Triplicate T4C-11
4132 ! Emacs.font: Ubuntu Mono-10.5
4133 ! Emacs.font: Ubuntu Mono-12
4134 ! Emacs.font: Iosevka-11
4135
4136 ! Emacs.font: Fira Mono:size=15
4137 ! Emacs.font: DejaVu Sans Mono:size=15
4138 ! Emacs.font: Inconsolata:size=17
4139 ! Emacs.font: Inconsolata:size=16
4140 ! Emacs.font: Inconsolata LGC:size=14
4141 ! Emacs.font: Source Code Pro Medium-10.5
4142 Emacs.font: Ubuntu Mono:size=16
4143 ! Emacs.font: Iosevka:size=16
4144 #+end_src
4145
4146 ***** rxvt-unicode
4147 :PROPERTIES:
4148 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
4149 :END:
4150
4151 #+begin_src conf-xdefaults
4152 ! Font
4153 URxvt.font:             xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
4154 URxvt.boldFont:         xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
4155 URxvt.italicFont:       xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
4156 URxvt.bolditalicFont:   xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
4157
4158 URxvt.xftAntialias:     true
4159 URxvt.letterSpace:      0
4160
4161 URxvt.depth:                0
4162 URxvt.loginShell:           true
4163 URxvt.saveLines:            100000
4164 URxvt.internalBorder:       3
4165 URxvt.lineSpace:            0
4166 URxvt.scrollBar:            false
4167 URxvt.scrollStyle:          rxvt
4168 URxvt*scrollTtyOutput:      false
4169 URxvt*scrollWithBuffer:     true
4170 URxvt*scrollTtyKeypress:    true
4171 URxvt.keysym.Shift-Up:      command:\033]720;1\007
4172 URxvt.keysym.Shift-Down:    command:\033]721;1\007
4173
4174 URxvt.perl-ext-common:      default,clipboard,url-select,keyboard-select
4175 URxvt.perl-ext:             bidi
4176 URxvt.bidi.enabled:         1
4177 URxvt.url-select.launcher:  firefox
4178 URxvt.url-select.underline: true
4179 URxvt.keysym.M-u:           perl:url-select:select_next
4180 URxvt.keysym.M-Escape:      perl:keyboard-select:activate
4181 URxvt.keysym.M-s:           perl:keyboard-select:search
4182 URxvt.url-launcher:         /usr/bin/firefox
4183 URxvt.matcher.button:       1
4184 URxvt.iso14755:             false
4185 URxvt.iso14755_53:          false
4186 URxvt.keysym.M-c:           perl:clipboard:copy
4187 URxvt.keysym.M-v:           perl:clipboard:paste
4188 URxvt.keysym.C-A-V:         perl:clipboard:paste_escaped
4189 URxvt.keysym.C-Up:          font-size:increase
4190 URxvt.keysym.C-Down:        font-size:decrease
4191 URxvt.keysym.C-S-Up:        font-size:incglobal
4192 URxvt.keysym.C-S-Down:      font-size:decglobal
4193 URxvt.keysym.C-equal:       font-size:reset
4194 !URxvt.keysym.C-question:   font-size:show
4195
4196 URxvt.iconFile:             /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
4197
4198 !urxvt*foreground: white
4199 !urxvt*background: black
4200
4201 !*color0:  #2E3436
4202 !*color1:  #a40000
4203 !*color2:  #4E9A06
4204 !*color3:  #C4A000
4205 !*color4:  #3465A4
4206 !*color5:  #75507B
4207 !*color6:  #ce5c00
4208 !*color7:  #babdb9
4209 !*color8:  #555753
4210 !*color9:  #EF2929
4211 !*color10: #8AE234
4212 !*color11: #FCE94F
4213 !*color12: #729FCF
4214 !*color13: #AD7FA8
4215 !*color14: #fcaf3e
4216 !*color15: #EEEEEC
4217
4218 !URxvt.foreground: #C8C8C8
4219 !URxvt.background: #FFFFFF
4220
4221 !! black
4222 !*color0:  #2E3436
4223 !*color8:  #555753
4224 !! red
4225 !*color1:  #a40000
4226 !*color9:  #EF2929
4227 !! green
4228 !*color2:  #4E9A06
4229 !*color10: #8AE234
4230 !! yellow
4231 !*color3:  #C4A000
4232 !*color11: #FCE94F
4233 !! blue
4234 !*color4:  #3465A4
4235 !*color12: #729FCF
4236 !! purple
4237 !*color5:  #75507B
4238 !*color13: #AD7FA8
4239 !! orange (replaces cyan)
4240 !*color6:  #ce5c00
4241 !*color14: #fcaf3e
4242 !! white
4243 !*color7:  #babdb9
4244 !*color15: #EEEEEC
4245
4246 ! Tango colour theme for rxvt-unicode
4247 URxvt.background: #FFFFFF
4248 URxvt.foreground: #000000
4249
4250 ! Black
4251 URxvt.color0: #2E3436
4252 URxvt.color8: #757773
4253
4254 ! Red
4255 URxvt.color1: #CC0000
4256 URxvt.color9: #EF2929
4257
4258 ! Green
4259 URxvt.color2: #4E9A06
4260 URxvt.color10: #8AE234
4261
4262 ! Yellow
4263 URxvt.color3: #C4A000
4264 URxvt.color11: #FCE94F
4265
4266 ! Blue
4267 URxvt.color4: #3465A4
4268 URxvt.color12: #729FCF
4269
4270 ! Magenta
4271 URxvt.color5: #75507B
4272 URxvt.color13: #AD7FA8
4273
4274 !! Cyan
4275 !URxvt.color6: #06989A
4276 !URxvt.color14: #34E2E2
4277 ! orange (replaces cyan)
4278 *color6:  #ce5c00
4279 *color14: #fcaf3e
4280
4281 ! White
4282 URxvt.color7: #D3D7CF
4283 URxvt.color15: #EEEEEC
4284 #+end_src
4285
4286 ** XDG
4287 :PROPERTIES:
4288 :header-args+: :tangle ~/.config/user-dirs.dirs
4289 :END:
4290
4291 #+begin_src conf
4292 XDG_DESKTOP_DIR="$HOME/Desktop"
4293 XDG_DOCUMENTS_DIR="$HOME/usr/docs"
4294 XDG_DOWNLOAD_DIR="$HOME/usr/dls"
4295 XDG_MUSIC_DIR="$HOME/usr/music"
4296 XDG_PICTURES_DIR="$HOME/usr/pics"
4297 XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
4298 XDG_TEMPLATES_DIR="$HOME/usr/Templates"
4299 XDG_VIDEOS_DIR="$HOME/usr/vids"
4300 #+end_src
4301
4302 ** Zathura
4303 :PROPERTIES:
4304 :header-args+: :tangle ~/.config/zathura/zathurarc
4305 :END:
4306
4307 #+begin_src conf
4308 set smooth-scroll true
4309 set selection-clipboard clipboard
4310 set zoom-step 05
4311 set default-bg "#272727"
4312 set statusbar-bg "#272727"
4313 set inputbar-bg "#373737"
4314 #+end_src
4315
4316 ** Zsh
4317
4318 My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
4319 [[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
4320 installed.
4321
4322 *** zimrc
4323 :PROPERTIES:
4324 :header-args+: :tangle ~/.zimrc
4325 :END:
4326
4327 #+begin_src sh
4328
4329
4330 #################
4331 # CORE SETTINGS #
4332 #################
4333
4334 #
4335 # Zim settings
4336 #
4337
4338 # Select what modules you would like enabled.
4339 # The second line of modules may depend on options set by modules in the first
4340 # line. These dependencies are noted on the respective module's README.md.
4341 zmodules=(directory environment git git-info history input ssh utility custom \
4342           syntax-highlighting history-substring-search prompt completion)
4343
4344
4345 ###################
4346 # MODULE SETTINGS #
4347 ###################
4348
4349 #
4350 # Prompt
4351 #
4352
4353 # Set your desired prompt here
4354 zprompt_theme='pure'
4355 #PURE_PROMPT_SYMBOL=λ
4356 #PURE_PROMPT_SYMBOL=δ
4357 PURE_PROMPT_SYMBOL=➜
4358
4359 #
4360 # Completion
4361 #
4362
4363 # set an optional host-specific filename for the completion cache file
4364 # if none is provided, the default '.zcompdump' is used.
4365 #zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
4366
4367 #
4368 # Utility
4369 #
4370
4371 # Uncomment to enable command correction prompts
4372 # See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
4373 setopt CORRECT
4374
4375 #
4376 # Environment
4377 #
4378
4379 # Set the string below to the desired terminal title format string.
4380 # The terminal title is redrawn upon directory change, however, variables like
4381 # ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
4382 #   http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
4383 # The example below uses the following format: 'username@host:/current/directory'
4384 ztermtitle='%n@%m:%~'
4385
4386 #
4387 # Input
4388 #
4389
4390 # Uncomment to enable double-dot expansion.
4391 # This appends '../' to your input for each '.' you type after an initial '..'
4392 #zdouble_dot_expand='true'
4393
4394 #
4395 # Syntax-Highlighting
4396 #
4397
4398 # This determines what highlighters will be used with the syntax-highlighting module.
4399 # Documentation of the highlighters can be found here:
4400 #   https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
4401 # For (u)rxvt, termite and gnome-terminal users,
4402 # removing the 'cursor' highlighter will fix the disappearing cursor problem
4403 #zhighlighters=(main brackets cursor)
4404 zhighlighters=(main brackets pattern)
4405
4406
4407 #
4408 # SSH
4409 #
4410
4411 # Load these ssh identities with the ssh module
4412 zssh_ids=(id_rsa plasma_id_rsa id_ed25519 id_rsa_aur)
4413
4414
4415 #
4416 # Pacman
4417 #
4418
4419 # Set (optional) pacman front-end.
4420 zpacman_frontend='yay'
4421
4422 # Load any helper scripts as defined here
4423 #zpacman_helper=(aur)
4424 #+end_src
4425
4426 *** zlogin
4427 :PROPERTIES:
4428 :header-args+: :tangle ~/.zlogin
4429 :END:
4430
4431 #+begin_src sh
4432
4433
4434 #
4435 # User configuration sourced by login shells
4436 #
4437
4438 # Initialize zim
4439 [[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
4440 #+end_src
4441
4442 *** zprofile
4443 :PROPERTIES:
4444 :header-args+: :tangle ~/.zprofile
4445 :END:
4446
4447 #+begin_src sh
4448 #PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
4449 #PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
4450 export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
4451 export XDG_CONFIG_HOME=$HOME/.config
4452 export XDG_DATA_HOME=$HOME/.local/share
4453 export XDG_DATA_DIRS=/usr/local/share:/usr/share
4454 export MAILDIR="$HOME/mail"
4455 export CVS_RSH=ssh
4456 #export MATHMODELS=$HOME/src/eiffel/mathmodels
4457 #export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
4458 #export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
4459
4460 # Eiffel2Java stuff
4461 #export JAVA_HOME=/usr/lib/jvm/default
4462 #export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
4463 #export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4464 #export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4465
4466 #export PATH="$HOME/usr/build/pvs:$PATH"
4467 #export SBCLISP_HOME=/usr/share/sbcl-source
4468 #export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
4469
4470 export MOZ_USE_XINPUT2=1  # precise scrolling in firefox
4471
4472 #export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
4473 #export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
4474
4475 if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
4476 #+end_src
4477
4478 *** zshenv
4479 :PROPERTIES:
4480 :header-args+: :tangle ~/.zshenv
4481 :END:
4482
4483 #+begin_src sh
4484 # Ensure that a non-login, non-interactive shell has a defined environment.
4485 if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
4486   source "${ZDOTDIR:-$HOME}/.zprofile"
4487 fi
4488 #+end_src
4489
4490 *** zshrc
4491 :PROPERTIES:
4492 :header-args+: :tangle ~/.zshrc
4493 :END:
4494
4495 #+begin_src sh
4496 # Bash-like navigation
4497 #export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
4498 #export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
4499 export WORDCHARS='*?[]~=&;!#$%^(){}<>'
4500 #ZLE_SPACE_SUFFIX_CHARS=$'|&'
4501
4502 #disable -r time       # disable shell reserved word
4503 #alias time='time -p'  # -p for POSIX output
4504
4505 # rehash if last command was pacaur or pacman
4506 # (so that zsh picks up changes in $PATH immediately)
4507 TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
4508
4509 #
4510 # User configuration sourced by interactive shells
4511 #
4512
4513 # Change default zim location
4514 export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
4515
4516 # Start zim
4517 [[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
4518
4519 ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
4520 #ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
4521
4522 setopt globdots
4523
4524 source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
4525 source ~/.zsh/zsh-autopair/autopair.zsh
4526
4527
4528 ### fzf ###
4529
4530 source /usr/share/fzf/key-bindings.zsh
4531 source /usr/share/fzf/completion.zsh
4532
4533 # Accept history selection instead of putting it on
4534 # the command line
4535 fzf-history-widget-accept() {
4536   fzf-history-widget
4537   zle accept-line
4538 }
4539 #zle     -N   fzf-history-widget-accept
4540 #bindkey '^R' fzf-history-widget-accept
4541
4542 # alt+c preview
4543 export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
4544
4545 ### fzf ###
4546
4547
4548 # aliases
4549 alias mpv="mpv --ytdl-format mp4"
4550 alias mv="mv -iv"
4551 alias cp="cp -iv"
4552 alias scl=systemctl
4553 alias jcl=journalctl
4554 alias m="mbsync -Va; getmail; notmuch new"
4555 alias best="youtube-dl -f best"
4556 alias nixx="ssh amin@nix.aminb.org"
4557 alias fence="ssh aminb@fencepost.gnu.org"
4558
4559 aur() {
4560    cd ~/usr/build
4561    git clone https://aur.archlinux.org/${1}.git
4562    cd ${1}
4563 }
4564
4565 # i-beam cursor
4566 echo -e "\033[5 q"
4567 #echo -e "\033[6 q"
4568 #+end_src
4569
4570 * Scripts
4571
4572 This section contains various useful scripts and the ones used by the
4573 programs above. For instance, =toggle-tablet= for switching to and
4574 from tablet mode on my X220T, =toggle-presentation-mode= for toggling
4575 Xfce's presentation mode which keeps the screen awake, and
4576 =rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
4577 exact brightness value.
4578
4579 ** rofi-light
4580 :PROPERTIES:
4581 :header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
4582 :END:
4583
4584 #+begin_src bash
4585 cur=$(light -G)
4586 val=$(rofi -dmenu -mesg "light    $cur" -p "light -S " -l 0 -width 12)
4587 light -S $val
4588 #+end_src
4589
4590 ** toggle-layout
4591 :PROPERTIES:
4592 :header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
4593 :END:
4594
4595 #+begin_src bash
4596 lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
4597
4598 if [ "$lang" = "us" ]; then
4599     setxkbmap ir
4600 else
4601     setxkbmap us
4602     # xmodmap $HOME/.Xmodmap
4603 fi
4604 #+end_src
4605
4606 ** toggle-presentation-mode
4607 :PROPERTIES:
4608 :header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
4609 :END:
4610
4611 #+begin_src bash
4612 xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
4613 #+end_src
4614
4615 ** toggle-tablet
4616 :PROPERTIES:
4617 :header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
4618 :END:
4619
4620 This script toggles between a 'normal' mode and a 'tablet' mode, doing
4621 a few things:
4622
4623 - rotates the screen using =xrandr=, so that rotating the physical
4624   display of my X220t would have the laptop's battery on the right
4625   hand side,
4626 - enables touch screen,
4627 - properly rotates the stylus pen and touch screen pointers, and
4628 - toggles between RGB and Vertical BGR sub-pixel order.
4629
4630 #+begin_src bash
4631 case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
4632     0)  # Screen is not rotated, we should rotate it right (90°)
4633            xrandr -o 3
4634            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
4635            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
4636            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
4637            xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
4638            ;;
4639     1)  # Currently top is rotated right, we should set it normal (0°)
4640           xrandr -o 0
4641           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
4642           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
4643           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
4644           xfconf-query -c xsettings -p /Xft/RGBA -s rgb
4645           ;;
4646     *)
4647            echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
4648            exit 1
4649            ;;
4650 esac
4651 #+end_src
4652
4653 ** unlock-def-gk.py
4654 :PROPERTIES:
4655 :header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
4656 :END:
4657
4658 #+begin_src python
4659 import gnomekeyring as gk
4660 # list_item_ids_sync('login')[0] == 1L
4661 gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
4662 #+end_src
4663
4664 ** wp
4665
4666 My little wallpaper changer script.
4667
4668 *** wp
4669 :PROPERTIES:
4670 :header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
4671 :END:
4672
4673 #+begin_src bash :tangle no
4674 export DISPLAY=:0
4675
4676 case "$1" in
4677   "day")
4678     feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
4679     ;;
4680   "night")
4681     feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
4682     ;;
4683   *)
4684     echo $"Usage: $0 {day|night}"
4685     exit 1
4686 esac
4687 #+end_src
4688
4689 *** wp-auto
4690 :PROPERTIES:
4691 :header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
4692 :END:
4693
4694 #+begin_src bash :tangle no
4695 SED=$(which sed)
4696 ROFI=$(which rofi)
4697
4698 export DISPLAY=:0
4699 HOUR=$(date +%H)
4700
4701 if [ -z "${SED}" ]
4702 then
4703     echo "Did not find 'sed', script cannot continue."
4704     exit 1
4705 fi
4706 if [ -z "${ROFI}" ]
4707 then
4708     echo "Did not find rofi, there is no point to continue."
4709     exit 1
4710 fi
4711
4712 ###
4713 # Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
4714 # Repeated calls should leave the config clean-ish
4715 ###
4716 function set_theme()
4717 {
4718     CDIR="${HOME}/.config/rofi/"
4719     if [ ! -d "${CDIR}" ]
4720     then
4721         mkdir -p ${CDIR}
4722     fi
4723     if [ -f "${CDIR}/config" ]
4724     then
4725         ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
4726     fi
4727     echo "rofi.theme: ${1}" >> "${CDIR}/config"
4728
4729 }
4730
4731 if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
4732     then
4733         feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
4734         xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
4735         set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
4736     else
4737         feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
4738         xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
4739         set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
4740 fi
4741 #+end_src
4742
4743 *** wp.service
4744 :PROPERTIES:
4745 :header-args+: :tangle ~/.config/systemd/user/wp.service
4746 :END:
4747
4748 #+begin_src conf :tangle no
4749 [Unit]
4750 Description=wallpaper service
4751
4752 [Service]
4753 Type=oneshot
4754 ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
4755 #+end_src
4756
4757 *** wp.timer
4758 :PROPERTIES:
4759 :header-args+: :tangle ~/.config/systemd/user/wp.timer
4760 :END:
4761
4762 #+begin_src conf :tangle no
4763 [Unit]
4764 [Unit]
4765 Description=wallpaper timer
4766
4767 [Timer]
4768 OnCalendar=07,21:00
4769 Unit=wp.service
4770 Persistent=true
4771
4772 [Install]
4773 WantedBy=timers.target
4774 #+end_src
4775
4776 ** zathura-sync.sh
4777 :PROPERTIES:
4778 :header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
4779 :END:
4780
4781 #+begin_src sh
4782 pos="$1"
4783 pdffile="$2"
4784 zathura --synctex-forward "$pos" "$pdffile" || \
4785     (
4786     zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
4787     sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
4788 #+end_src
4789 ** Fun :)
4790
4791 *** eat-em
4792 :PROPERTIES:
4793 :header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
4794 :END:
4795
4796 #+begin_src sh
4797 # Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
4798 # [ESC] character in original post removed here.
4799
4800 # ANSI Color -- use these variables to easily have different color
4801 #    and format output. Make sure to output the reset sequence after
4802 #    colors (f = foreground, b = background), and use the 'off'
4803 #    feature for anything you turn on.
4804
4805 initializeANSI()
4806 {
4807  esc="$(echo -en '\e')"
4808
4809   blackf="${esc}[30m";   redf="${esc}[31m";    greenf="${esc}[32m"
4810   yellowf="${esc}[33m"   bluef="${esc}[34m";   purplef="${esc}[35m"
4811   cyanf="${esc}[36m";    whitef="${esc}[37m"
4812
4813   blackb="${esc}[40m";   redb="${esc}[41m";    greenb="${esc}[42m"
4814   yellowb="${esc}[43m"   blueb="${esc}[44m";   purpleb="${esc}[45m"
4815   cyanb="${esc}[46m";    whiteb="${esc}[47m"
4816
4817   boldon="${esc}[1m";    boldoff="${esc}[22m"
4818   italicson="${esc}[3m"; italicsoff="${esc}[23m"
4819   ulon="${esc}[4m";      uloff="${esc}[24m"
4820   invon="${esc}[7m";     invoff="${esc}[27m"
4821
4822   reset="${esc}[0m"
4823 }
4824
4825 # note in this first use that switching colors doesn't require a reset
4826 # first - the new color overrides the old one.
4827
4828 #clear
4829
4830 initializeANSI
4831
4832 cat << EOF
4833
4834  ${yellowf}  ▄███████▄${reset}   ${redf}  ▄██████▄${reset}    ${greenf}  ▄██████▄${reset}    ${bluef}  ▄██████▄${reset}    ${purplef}  ▄██████▄${reset}    ${cyanf}  ▄██████▄${reset}
4835  ${yellowf}▄█████████▀▀${reset}  ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset}  ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset}  ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset}  ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset}  ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
4836  ${yellowf}███████▀${reset}      ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset}  ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset}  ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset}  ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset}  ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
4837  ${yellowf}███████▄${reset}      ${redf}████████████${reset}  ${greenf}████████████${reset}  ${bluef}████████████${reset}  ${purplef}████████████${reset}  ${cyanf}████████████${reset}
4838  ${yellowf}▀█████████▄▄${reset}  ${redf}██▀██▀▀██▀██${reset}  ${greenf}██▀██▀▀██▀██${reset}  ${bluef}██▀██▀▀██▀██${reset}  ${purplef}██▀██▀▀██▀██${reset}  ${cyanf}██▀██▀▀██▀██${reset}
4839  ${yellowf}  ▀███████▀${reset}   ${redf}▀   ▀  ▀   ▀${reset}  ${greenf}▀   ▀  ▀   ▀${reset}  ${bluef}▀   ▀  ▀   ▀${reset}  ${purplef}▀   ▀  ▀   ▀${reset}  ${cyanf}▀   ▀  ▀   ▀${reset}
4840
4841  ${boldon}${yellowf}  ▄███████▄   ${redf}  ▄██████▄    ${greenf}  ▄██████▄    ${bluef}  ▄██████▄    ${purplef}  ▄██████▄    ${cyanf}  ▄██████▄${reset}
4842  ${boldon}${yellowf}▄█████████▀▀  ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄  ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄  ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄  ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄  ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
4843  ${boldon}${yellowf}███████▀      ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███  ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███  ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███  ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███  ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
4844  ${boldon}${yellowf}███████▄      ${redf}████████████  ${greenf}████████████  ${bluef}████████████  ${purplef}████████████  ${cyanf}████████████${reset}
4845  ${boldon}${yellowf}▀█████████▄▄  ${redf}██▀██▀▀██▀██  ${greenf}██▀██▀▀██▀██  ${bluef}██▀██▀▀██▀██  ${purplef}██▀██▀▀██▀██  ${cyanf}██▀██▀▀██▀██${reset}
4846  ${boldon}${yellowf}  ▀███████▀   ${redf}▀   ▀  ▀   ▀  ${greenf}▀   ▀  ▀   ▀  ${bluef}▀   ▀  ▀   ▀  ${purplef}▀   ▀  ▀   ▀  ${cyanf}▀   ▀  ▀   ▀${reset}
4847
4848 EOF
4849 #+end_src
4850
4851 *** invade-em
4852 :PROPERTIES:
4853 :header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
4854 :END:
4855
4856 #+begin_src bash
4857 #
4858 # ANSI color scheme script featuring Space Invaders
4859 #
4860 # Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
4861 # Modified by lolilolicon
4862 #
4863
4864 f=3 b=4
4865 for j in f b; do
4866   for i in {0..7}; do
4867     printf -v $j$i %b "\e[${!j}${i}m"
4868   done
4869 done
4870 bld=$'\e[1m'
4871 rst=$'\e[0m'
4872
4873 cat << EOF
4874
4875  $f1  ▀▄   ▄▀     $f2 ▄▄▄████▄▄▄    $f3  ▄██▄     $f4  ▀▄   ▄▀     $f5 ▄▄▄████▄▄▄    $f6  ▄██▄  $rst
4876  $f1 ▄█▀███▀█▄    $f2███▀▀██▀▀███   $f3▄█▀██▀█▄   $f4 ▄█▀███▀█▄    $f5███▀▀██▀▀███   $f6▄█▀██▀█▄$rst
4877  $f1█▀███████▀█   $f2▀▀███▀▀███▀▀   $f3▀█▀██▀█▀   $f4█▀███████▀█   $f5▀▀███▀▀███▀▀   $f6▀█▀██▀█▀$rst
4878  $f1▀ ▀▄▄ ▄▄▀ ▀   $f2 ▀█▄ ▀▀ ▄█▀    $f3▀▄    ▄▀   $f4▀ ▀▄▄ ▄▄▀ ▀   $f5 ▀█▄ ▀▀ ▄█▀    $f6▀▄    ▄▀$rst
4879
4880  $bld$f1▄ ▀▄   ▄▀ ▄   $f2 ▄▄▄████▄▄▄    $f3  ▄██▄     $f4▄ ▀▄   ▄▀ ▄   $f5 ▄▄▄████▄▄▄    $f6  ▄██▄  $rst
4881  $bld$f1█▄█▀███▀█▄█   $f2███▀▀██▀▀███   $f3▄█▀██▀█▄   $f4█▄█▀███▀█▄█   $f5███▀▀██▀▀███   $f6▄█▀██▀█▄$rst
4882  $bld$f1▀█████████▀   $f2▀▀▀██▀▀██▀▀▀   $f3▀▀█▀▀█▀▀   $f4▀█████████▀   $f5▀▀▀██▀▀██▀▀▀   $f6▀▀█▀▀█▀▀$rst
4883  $bld$f1 ▄▀     ▀▄    $f2▄▄▀▀ ▀▀ ▀▀▄▄   $f3▄▀▄▀▀▄▀▄   $f4 ▄▀     ▀▄    $f5▄▄▀▀ ▀▀ ▀▀▄▄   $f6▄▀▄▀▀▄▀▄$rst
4884
4885
4886                                      $f7▌$rst
4887
4888                                    $f7▌$rst
4889
4890                               $f7    ▄█▄    $rst
4891                               $f7▄█████████▄$rst
4892                               $f7▀▀▀▀▀▀▀▀▀▀▀$rst
4893
4894 EOF
4895 #+end_src