[~bandali/configs] / rc.org

#+title: rc.org
#+property: header-args :comments link :mkdirp yes :results silent

* About

This org file contains the configuration files of pretty much every
program I use. The files are tangled (i.e. exported, or derived) from
this file using =org-babel=.

Note: This file is best viewed inside Emacs with org mode.

* Configs

This section contains the configuration files (dotfiles) of various
programs I use.

** bspwm

*** bspwmrc
:PROPERTIES:
:header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
:END:

#+begin_src sh :tangle no
sxhkd &
sh ~/.fehbg &
xfce4-panel -d &
compton &
sleep 0.5 && pasystray --notify=all &

bspc monitor -d I II III IV V VI VII VIII IX X
#bspc monitor eDP-1 -d I II III IV V
#bspc monitor HDMI-1 -d VI VII VIII IX X

#bspc config border_width         2
#bspc config window_gap           8
bspc config window_gap           0

bspc config bottom_padding 26

bspc config split_ratio          0.52
bspc config borderless_monocle   true
bspc config gapless_monocle      true
bspc config click_to_focus       button1
bspc config directional_focus_tightness low

#bspc rule -a Firefox desktop='^1' follow=on
bspc rule -a Nightly desktop='^1' follow=on
bspc rule -a Emacs desktop='^2' state=tiled follow=on
#bspc rule -a Chromium desktop='^4' follow=on
bspc rule -a URxvt state=floating
bspc rule -a URxvt:tiled state=tiled
bspc rule -a Connman-gtk state=floating
bspc rule -a Xfce4-panel state=floating
bspc rule -a TelegramDesktop state=floating
bspc rule -a Ec state=floating
bspc rule -a Pavucontrol state=floating
bspc rule -a Eog state=floating
bspc rule -a Seahorse state=floating
bspc rule -a mpv state=floating
bspc rule -a Evince state=floating
bspc rule -a Meld state=floating
bspc rule -a Autokey-gtk state=floating
bspc rule -a Mousepad state=floating
bspc rule -a Wrapper-1.0 state=floating
bspc rule -a File-roller state=floating
bspc rule -a Gnome-disks state=floating
bspc rule -a Termite state=floating
bspc rule -a Termite:tiled state=tiled
bspc rule -a Thunderbird:Calendar state=floating
bspc rule -a Audacity state=floating
bspc rule -a Proof state=floating # pvs x-show-proof
bspc rule -a Nm-connection-editor state=floating
bspc rule -a Wire state=floating
bspc rule -a discord state=floating
bspc rule -a X2goclient state=floating
bspc rule -a SimpleScreenRecorder state=floating
bspc rule -a Gimp state=floating
bspc rule -a Wrapper-2.0 state=floating
bspc rule -a Zathura state=tiled
#+end_src

*** sxhkdrc
:PROPERTIES:
:header-args+: :tangle ~/.config/sxhkd/sxhkdrc
:END:

#+begin_src conf :tangle no
#
# wm independent hotkeys
#

# terminal emulator
super + {_,shift} + Return
        urxvt{_, -name tiled}

#super + {_,shift} + Return
#       termite{_, --name=tiled}

# program launcher
super + space
        rofi -show run -display-run '> ' -display-window ' 🗔 '

super + alt + space
        xfce4-popup-whiskermenu

# window finder
super + backslash
        rofi -show window  -display-run '> ' -display-window ' 🗔 '

# password manager
alt + space
        rofi-pass

# firefox
#super + r
#       firefox

# chromium
#super + c
#       chromium -incognito

# emacs
super + e
        emacs

# make sxhkd reload its configuration files:
super + Escape
        pkill -USR1 -x sxhkd

# volume {up,down}
XF86Audio{Raise,Lower}Volume
        pamixer --allow-boost --{in,de}crease 5

# mute
XF86AudioMute
        pamixer --toggle-mute

XF86AudioMicMute
        pactl set-source-mute 1 toggle

# playback control
XF86Audio{Play,Prev,Next}
        mpc {toggle,prev,next}

# lock the screen
super + shift + q
        light-locker-command -l

# Toggle keyboard layout
super + F7
        toggle-layout

# Toggle Xfce presentation mode
XF86LaunchB
        toggle-presentation-mode

# monitor brightness
XF86MonBrightness{Up,Down}
        light -{A,U} 5

super + apostrophe
        rofi-light

# keyboard brightness
#XF86KbdBrightness{Up,Down}
#       kbdlight {up,down}

XF86RotateWindows
        toggle-tablet

#
# bspwm hotkeys
#

# quit bspwm normally
super + alt + Escape
        bspc quit

# close and kill
super + {w,q}
        bspc node -{c,k}

# alternate between the tiled and monocle layout
super + m
        bspc desktop -l next

# send the newest marked node to the newest preselected node
super + y
        bspc node newest.marked.local -n newest.!automatic.local

# swap the current node and the biggest node
super + g
        bspc node -s biggest

#
# state/flags
#

# set the window state
super + {t,shift + t,s,f}
        bspc node -t {tiled,pseudo_tiled,floating,fullscreen}

# set the node flags
super + ctrl + {m,x,y,z}
        bspc node -g {marked,locked,sticky,private}

#
# focus/swap
#

# focus the node in the given direction
super + {_,shift + }{h,j,k,l}
        bspc node -{f,s} {west,south,north,east}

# focus the node for the given path jump
super + {p,b,comma,period}
        bspc node -f @{parent,brother,first,second}

# focus the next/previous node in the current desktop
super + {_,shift + }c
        bspc node -f {next,prev}.local

# focus the next/previous desktop in the current monitor
super + bracket{left,right}
        bspc desktop -f {prev,next}.local

# send to next/prev desktop
super + shift + bracket{left,right}
        bspc node -d {prev,next} --follow

# focus the last node/desktop
super + {grave,Tab}
        bspc {node,desktop} -f last

# focus the older or newer node in the focus history
super + {o,i}
        bspc wm -h off; \
        bspc node {older,newer} -f; \
        bspc wm -h on

# focus or send to the given desktop
super + {_,shift + }{1-9,0}
        bspc {desktop -f,node -d} '^{1-9,10}'

#
# preselect
#

# preselect the direction
super + ctrl + {h,j,k,l}
        bspc node -p {west,south,north,east}

# preselect the ratio
super + ctrl + {1-9}
        bspc node -o 0.{1-9}

# cancel the preselection for the focused node
super + ctrl + space
        bspc node -p cancel

# cancel the preselection for the focused desktop
super + ctrl + shift + space
        bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel

#
# move/resize
#

# expand a window by moving one of its side outward
super + alt + {h,j,k,l}
        bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}

# contract a window by moving one of its side inward
super + alt + shift + {h,j,k,l}
        bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}

# move a floating window
super + {Left,Down,Up,Right}
        bspc node -v {-20 0,0 20,0 -20,20 0}

#alt + bracket{left,right}
#       xdotool key --clearmodifiers ctrl+Page_{Up,Down}
#+end_src

** compton
:PROPERTIES:
:header-args+: :tangle ~/.config/compton.conf
:END:

#+begin_src conf :tangle no
# Shadow
shadow = false;                 # Enabled client-side shadows on windows.
no-dock-shadow = true;          # Avoid drawing shadows on dock/panel windows.
no-dnd-shadow = true;           # Don't draw shadows on DND windows.
clear-shadow = true;            # Zero the part of the shadow's mask behind the 
                                # window. Fix some weirdness with ARGB windows.
shadow-radius = 5;              # The blur radius for shadows. (default 12)
shadow-offset-x = -5;           # The left offset for shadows. (default -15)
shadow-offset-y = -5;           # The top offset for shadows. (default -15)
# shadow-opacity = 0.7;         # The translucency for shadows. (default .75)
# shadow-red = 0.0;             # Red color value of shadow. (0.0 - 1.0, defaults to 0)
# shadow-green = 0.0;           # Green color value of shadow. (0.0 - 1.0, defaults to 0)
# shadow-blue = 0.0;            # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ];    # Exclude conditions for shadows.
# shadow-exclude = "n:e:Notification";
#shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
shadow-ignore-shaped = true;    # Avoid drawing shadow on all shaped windows
                                # (see also: --detect-rounded-corners)

# Opacity
menu-opacity = 1.0;                     # The opacity for menus. (default 1.0)
#inactive-opacity = 0.9;                        # Default opacity of inactive windows. (0.0 - 1.0)
# active-opacity = 0.8;                 # Default opacity for active windows. (0.0 - 1.0)
frame-opacity = 1.0;                    # Opacity of window titlebars and borders. (0.1 - 1.0)
# inactive-opacity-override = true;     # Let inactive opacity set by 'inactive-opacity' overrides
                                        # value of _NET_WM_OPACITY. Bad choice.
alpha-step = 0.06;                      # XRender backend: Step size for alpha pictures. Increasing
                                        # it may result in less X resource usage,
                                        # Yet fading may look bad.
#inactive-dim = 0.5;                    # Dim inactive windows. (0.0 - 1.0)
#inactive-dim-fixed = true;             # Do not let dimness adjust based on window opacity.
# blur-background = true;               # Blur background of transparent windows.
                                        # Bad performance with X Render backend.
                                        # GLX backend is preferred.
# blur-background-frame = true;         # Blur background of opaque windows with transparent
                                        # frames as well.
blur-background-fixed = true;           # Do not let blur radius adjust based on window opacity.
blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
                                        # Exclude conditions for background blur.

# Fading
fading = false;                 # Fade windows during opacity changes.
fade-delta = 3;         # The time between steps in a fade in milliseconds. (default 10).
fade-in-step = 0.03;            # Opacity change between steps while fading in. (default 0.028).
fade-out-step = 0.03;           # Opacity change between steps while fading out. (default 0.03).
# no-fading-openclose = true;   # Avoid fade windows in/out when opening/closing.
fade-exclude = [ ];             # Exclude conditions for fading.

# Other
backend = "glx"                 # Backend to use: "xrender" or "glx". GLX backend is typically
                                # much faster but depends on a sane driver.
mark-wmwin-focused = true;      # Try to detect WM windows and mark them as active.
mark-ovredir-focused = true;    # Mark all non-WM but override-redirect windows active (e.g. menus).
use-ewmh-active-win = true;     # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
                                # instead of using FocusIn/Out events. Usually more reliable but
                                # depends on a EWMH-compliant WM.
detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
detect-client-opacity = true;   # Detect _NET_WM_OPACITY on client windows, useful for window
                                # managers not passing _NET_WM_OPACITY of client windows to frame
                                # windows.
refresh-rate = 0;               # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
vsync = "drm";                  # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc" 
                                # See man page for more details.
dbe = false;                    # Enable DBE painting mode. Rarely needed.
paint-on-overlay = true;        # Painting on X Composite overlay window. Recommended.
sw-opti = false;                # Limit compton to repaint at most once every 1 / refresh_rate.
                                # Incompatible with certain VSync methods.
unredir-if-possible = false;    # Unredirect all windows if a full-screen opaque window is
                                # detected, to maximize performance for full-screen windows.
focus-exclude = [ ];            # A list of conditions of windows that should always be considered
                                # focused.
detect-transient = true;        # Use WM_TRANSIENT_FOR to group windows, and consider windows in
                                # the same group focused at the same time.
detect-client-leader = true;    # Use WM_CLIENT_LEADER to group windows.
invert-color-include = [ ];     # Conditions for windows to be painted with inverted color.

# GLX backend                   # GLX backend fine-tune options. See man page for more info.
glx-no-stencil = true;          # Recommended.
glx-copy-from-front = false;    # Useful with --glx-swap-method,
# glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
# glx-no-rebind-pixmap = true;  # Recommended if it works.      
glx-no-rebind-pixmap = true;    # Recommended if it works.      
#glx-swap-method = "4"; # See man page.
glx-swap-method = "4";  # See man page.

# Window type settings
wintypes:
{
  tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
  menu = { shadow = false; };
  dropdown_menu = { shadow = false; };
  popup_menu =  { shadow = false; };
  utility =  { shadow = false; };
  # fade: Fade the particular type of windows.
  # shadow: Give those windows shadow
  # opacity: Default opacity for the type of windows.
  # focus: Whether to always consider windows of this type focused.
};
#+end_src

** Dunst
:PROPERTIES:
:header-args+: :tangle ~/.config/dunst/dunstrc
:END:

#+begin_src conf
[global]
#font = Ubuntu Mono 10.5
font = Inconsolata 11

# Path to default icons.
icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/

icon_position = left
# <b>bold</b>
# <i>italic</i>
# <s>strikethrough<s/>
# <u>underline</u>
markup = full
# The format of the message. Possible variables are:
#   %a  appname
#   %s  summary
#   %b  body
#   %i  iconname (including its path)
#   %I  iconname (without its path)
#   %p  progress value if set ([  0%] to [100%]) or nothing
# Markup is allowed
format = "<b>%s</b>\n%b"
# Sort messages by urgency
sort = yes
# Show how many messages are currently hidden (because of geometry)
indicate_hiddenl= no
# Alignment of message text.
# Possible values are "left", "center" and "right"
alignment = center
# The frequency with wich text that is longer than the notification
# window allows bounces back and forth.
# This option conflicts with 'word_wrap'.
# Set to 0 to disable
bounce_freq = 3
# show age of message if message is older than show_age_threshold seconds.
# set to -1 to disable
show_age_threshold = -1
# split notifications into multiple lines if they don't fit into geometry
word_wrap = yes
# ignore newlines '\n' in notifications
ignore_newline = no
# The geometry of the message window.
# geometry [{width}]x{height}][+/-{x}+/-{y}]
# The height is measured in number of notifications everything else in pixels. If the width
# is omitted but the height is given ("-geometry x2"), the message window
# expands over the whole screen (dmenu-like). If width is 0,
# the window expands to the longest message displayed.
# A positive x is measured from the left, a negative from the
# right side of the screen.  Y is measured from the top and down respectevly.
# The width can be negative. In this case the actual width is the
# screen width minus the width defined in within the geometry option.
#geometry = "410x12-12+12"
#geometry = "0x0-30-30"
geometry = "260x12-30-30"
# The transparency of the window. range: [0; 100]
# This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
transparency = 0
# Don't remove messages, if the user is idle (no mouse or keyboard input)
# for longer than idle_threshold seconds.
# Set to 0 to disable.
idle_threshold = 120
# Which monitor should the notifications be displayed on.
monitor = 0
# Display notification on focused monitor. Possible modes are:
# mouse: follow mouse pointer
# keyboard: follow window with keyboard focus
# none: don't follow anything
#
# "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
# This should be the case for almost all modern windowmanagers.
#
# If this option is set to mouse or keyboard, the monitor option will be
# ignored.
follow = keyboard
# should a notification popped up from history be sticky or
# timeout as if it would normally do.
sticky_history = yes
# The height of a single line. If the height is smaller than the font height,
# it will get raised to the font height.
# This adds empty space above and under the text.
line_height = 0

show_indicators = yes

# Draw a line of 'separatpr_height' pixel height between two notifications.
# Set to 0 to disable
separator_height = 3
# padding between text and separator
padding = 8
# horizontal padding
horizontal_padding = 8
# Define a color for the separator.
# possible values are:
#  * auto: dunst tries to find a color fitting to the background
#  * foreground: use the same color as the foreground
#  * frame: use the same color as the frame.
#  * anything else will be interpreted as a X color
separator_color = foreground
# print a notification on startup
# This is mainly for error detection, since dbus (re-)starts dunst
# automatically after a crash.
startup_notification = false
# dmenu path
#dmenu = /usr/bin/dmenu -p dunst:
dmenu = /usr/bin/rofi -dmenu -p dunst:
# browser for opening urls in context menu
browser = /usr/bin/firefox -new-tab
[frame]
width = 0
color = "#377222"
[shortcuts]
# shortcuts are specified as [modifier+][modifier+]...key
# available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
# and 'mod4' (windows-key)
# xev might be helpful to find names for keys
# close notification
close = ctrl+space
# close all notifications
close_all = ctrl+shift+space
# redisplay last message(s)
# On the US keyboard layout 'grave' is normally above TAB and left of '1'.
history = ctrl+shift+h
# context menu
context = ctrl+shift+period
[urgency_low]
# IMPORTANT: colors have to be defined in quotation marks.
# Otherwise the '#' and following  would be interpreted as a comment.
background = "#1d2a30"
foreground = "#71c2af"
timeout = 3
[urgency_normal]
background = "#1d2a30"
foreground = "#71c2af"
timeout = 0
[urgency_critical]
background = "#1d2a30"
foreground = "#ff9982"
timeout = 0

# Every section that isn't one of the above is interpreted as a rules
# to override settings for certain messages.
# Messages can be matched by 'appname', 'summary', 'body' or 'icon'
# and you can override the 'timeout', 'urgency', 'foreground', 'background'
# and 'format'.
# Shell-like globbing will get expanded.
#
# SCRIPTING
# you can specify a script that gets run when the rule matches by setting
# the 'script' option.
# The script will be called as follows:
# script appname summary body icon urgency
# where urgency can be "LOW", "NORMAL" or "CRITICAL".
#
# NOTE: if you don't want a notification to be displayed, set the format to ""
# NOTE: It might be helpful to run dunst -print in a terminal in order to find
# fitting options for rules.
#[espeak]
#    summary = "*"
#    script = dunst_espeak.sh
#[script-test]
#    summary = "*script*"
#    script = dunst_test.sh
#[ignore]
## This notification will not be displayed
#    summary = "foobar"
#    format = ""
#[signed_on]
#    appname = Pidgin
#    summary = "*signed on*"
#    urgency = low
#
#[signed_off]
#    appname = Pidgin
#    summary = *signed off*
#    urgency = low
#
#[says]
#    appname = Pidgin
#    summary = *says*
#    urgency = critical
#
#[twitter]
#    appname = Pidgin
#    summary = *twitter.com*
#    urgency = normal
#
[xfpm-backlight]
    summary = *Brightness*
    urgency = low
#+end_src

** Fontconfig
:PROPERTIES:
:header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
:END:

#+begin_src xml
<?xml version="1.0"?>
<!DOCTYPE fontconfig SYSTEM "fonts.dtd">
<fontconfig>
 <match target="font">
  <edit mode="assign" name="rgba">
   <const>rgb</const>
  </edit>
 </match>
 <match target="font">
  <edit mode="assign" name="hinting">
   <bool>true</bool>
  </edit>
 </match>
 <match target="font">
  <edit mode="assign" name="hintstyle">
   <const>hintslight</const>
  </edit>
 </match>
 <match target="font">
  <edit mode="assign" name="antialias">
   <bool>true</bool>
  </edit>
 </match>
 <match target="font">
  <edit mode="assign" name="lcdfilter">
   <const>lcddefault</const>
  </edit>
 </match>
 <dir>~/.fonts</dir>

 <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
 <alias binding="same">
  <family>Helvetica</family>
  <accept>
   <family>Liberation Sans</family>
  </accept>
</alias>
</fontconfig>
#+end_src

** Git

*** gitconfig
:PROPERTIES:
:header-args+: :tangle ~/.gitconfig
:END:

**** user
#+begin_src conf
[user]
    name = Amin Bandali
    email = amin@aminb.org
    signingkey = 4E05246AB0BF7FFB
#+end_src

**** signing
#+begin_src conf
[commit]
    gpgsign = true
# [format]
#     signoff = true
#+end_src

**** core
#+begin_src conf
[core]
    autocrlf = input  # CRLF -> LF on commit
    editor = emacsclient -t
    excludesfile = ~/.gitignore_global
    pager = "less"
#+end_src

**** gpg
#+begin_src conf
[gpg]
    program = gpg2
#+end_src

**** alias
#+begin_src conf
[alias]
    git = !exec git  # handle nested git calls, e.g. git git status
    aliases = config --get-regexp '^alias\\.'
    a = add
    s = status
    sl = status --long
    c = checkout
    cb = checkout -b
    b = branch
    r = rebase
    p = pull
    pr = pull --rebase
    ps = push
    psf = push --force
#+end_src

**** color
#+begin_src conf
[color]
    ui = auto
[color "status"]
    added = green bold
    changed = red bold
    untracked = red bold
[color "branch"]
    current = green bold
    remote = magenta bold
[color "diff"]
    new = green bold
    old = red bold
#+end_src

**** status
#+begin_src conf
[status]
    # showUntrackedFiles = all
    short=true
    branch=true
#+end_src

**** github
#+begin_src conf
[github]
        user = aminb
#+end_src

**** send-email
#+begin_src conf
[sendemail]
        smtpuser = amin@aminb.org
        smtpserver = nix.aminb.org
        smtpserverport = 587
        smtpencryption = tls
        annotate = yes
#+end_src

*** gitignore
:PROPERTIES:
:header-args+: :tangle ~/.gitignore_global
:END:

#+begin_src conf
*.orig
*.py[co]
*.sublime-workspace
*~
.DS_Store
*.elc
*-autoloads.el
#+end_src

** [[https://github.com/Leinnan/i3gs][i3gs]]
:PROPERTIES:
:header-args+: :tangle ~/.config/i3gs/config
:END:

#+begin_src conf :comments none
borders_width=0 0 2 0
separator_width=10

#[mpd]
#preset=MPD
#title=<span weight='heavy' fgcolor='#7FDBFF'> </span>
#borders_color=#7FDBFF

[ram]
preset=RAM
title=<span weight='heavy' fgcolor='#3D9970'> </span>
borders_color=#3D9970

#[cpu]
#preset=CPU
#title=<span weight='heavy' fgcolor='#2ECC40'> </span>
#borders_color=#2ECC40

#[hdd]
#preset=HDD
#title=<span weight='heavy' fgcolor='#01FF70'> </span>
#borders_color=#01FF70

[battery]
preset=BAT
command=battery-percentage-time
title=<span weight='heavy' fgcolor='#39CCCC'> </span>
borders_color=#39CCCC

[wifi]
preset=WIFI
title=<span weight='heavy' fgcolor='#01FF70'> </span>
borders_color=#01FF70

[date]
preset=DATE
command=date '+%-I:%M, %a %b %d'
title=<span weight='heavy' fgcolor='#FFDC00'> </span>
borders_color=#FFDC00
separator_width=0
#+end_src
** Latexmk
:PROPERTIES:
:header-args+: :tangle ~/.latexmkrc
:END:

#+begin_src conf
$pdf_previewer = "start zathura %O %S";
$clean_ext = "aux out";

# $pdf_update_method = 4;
# $pdf_update_command = "zathura %O %S";

# Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
# by Ctrl+click in the PDF.
# Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
# editor.
# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
#+end_src

** libinput

Improve XPS 15 9560's touchpad experience.

# begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
#+begin_src conf :tangle no
Section "InputClass"
    Identifier "libinput touchpad catchall"
    Driver "libinput"
    MatchIsTouchpad "on"
    Option "ClickMethod" "clickfinger"
    Option "NaturalScrolling" "true"
    Option "Tapping" "on"
    Option "TappingButtonMap" "lrm"
EndSection
#+end_src

** getmail

*** getmailrc
:PROPERTIES:
:header-args+: :tangle ~/.getmail/getmailrc
:END:

#+begin_src conf
[retriever]
type = SimplePOP3SSLRetriever
server = fencepost.gnu.org
username = aminb
password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
port = 995
use_apop = True

[destination]
type = Maildir
path = ~/mail/gnu/Inbox/

[options]
delete = True
#+end_src

*** getmail.service
:PROPERTIES:
:header-args+: :tangle ~/.config/systemd/user/getmail.service
:END:

#+begin_src conf :tangle no
[Unit]
Description=getmail service

[Service]
Type=oneshot
ExecStart=/usr/bin/getmail
StandardOutput=syslog
StandardError=syslog
#+end_src

*** getmail.timer
:PROPERTIES:
:header-args+: :tangle ~/.config/systemd/user/getmail.timer
:END:

#+begin_src conf :tangle no
[Unit]
Description=getmail timer

[Timer]
OnCalendar=*:0/30
Persistent=true
Unit=getmail.service

[Install]
WantedBy=timers.target
#+end_src

** GnuPG
:PROPERTIES:
:header-args+: :tangle ~/.gnupg/gpg-agent.conf
:END:

#+begin_src conf
default-cache-ttl 43200
max-cache-ttl 43200

default-cache-ttl-ssh 10800
max-cache-ttl-ssh 10800

# pinentry-program /usr/bin/pinentry-qt
#+end_src

** GTK

*** gtk-2.0
:PROPERTIES:
:header-args+: :tangle ~/.gtkrc-2.0
:END:

#+begin_src conf
gtk-theme-name="Greybird"
gtk-icon-theme-name="Paper"
gtk-font-name="Ubuntu 10"
gtk-menu-images=0
# gtk-key-theme-name = "Emacs"
#+end_src

*** gtk-3.0
:PROPERTIES:
:header-args+: :tangle ~/.config/gtk-3.0/settings.ini
:END:

#+begin_src conf :tangle no
[Settings]
gtk-icon-theme-name = Paper
# gtk-theme-name = Adwaita

gtk-theme-name = Greybird
# gtk-theme-name = Arc-Darker
# gtk-theme-name = Numix-ArchBlue

gtk-font-name = Ubuntu 10
# gtk-key-theme-name = Emacs
#+end_src

** isync

*** mbsyncrc
:PROPERTIES:
:header-args+: :tangle ~/.mbsyncrc
:END:

#+begin_src conf
# Global defaults
CopyArrivalDate yes

######
IMAPAccount amin
Host nix.aminb.org
User amin@aminb.org
PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
SSLType IMAPS

IMAPStore amin-remote
Account amin

MaildirStore amin-local
Path ~/mail/amin/
Inbox ~/mail/amin/Inbox
SubFolders Verbatim

Channel amin
Master :amin-remote:
Slave :amin-local:
Patterns * !dovecot*
Create Both
SyncState *

######
IMAPAccount uwaterloo
Host connect.uwaterloo.ca
User abandali
PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
SSLType IMAPS

IMAPStore uwaterloo-remote
Account uwaterloo

MaildirStore uwaterloo-local
Path ~/mail/uwaterloo/
Inbox ~/mail/uwaterloo/Inbox
SubFolders Verbatim

Channel uwaterloo
Master :uwaterloo-remote:
Slave :uwaterloo-local:
Patterns * !dovecot*
Create Both
SyncState *
#+end_src

*** mbsync.service
:PROPERTIES:
:header-args+: :tangle ~/.config/systemd/user/mbsync.service
:END:

#+begin_src conf :tangle no
[Unit]
Description=mbsync service

[Service]
Type=oneshot
ExecStart=/usr/bin/mbsync -Va
StandardOutput=syslog
StandardError=syslog
#+end_src

*** mbsync.timer
:PROPERTIES:
:header-args+: :tangle ~/.config/systemd/user/mbsync.timer
:END:

#+begin_src conf :tangle no
[Unit]
Description=mbsync timer

[Timer]
OnCalendar=*:0/15
Persistent=true
Unit=mbsync.service

[Install]
WantedBy=timers.target
#+end_src

** mpd
:PROPERTIES:
:header-args+: :tangle ~/.config/mpd/mpd.conf
:END:

#+begin_src conf
# An example configuration file for MPD.
# Read the user manual for documentation: http://www.musicpd.org/doc/user/


# Files and directories #######################################################
#
# This setting controls the top directory which MPD will search to discover the
# available audio files and add them to the daemon's online database. This 
# setting defaults to the XDG directory, otherwise the music directory will be
# be disabled and audio files will only be accepted over ipc socket (using
# file:// protocol) or streaming files over an accepted protocol.
#
music_directory         "~/usr/music"
#
# This setting sets the MPD internal playlist directory. The purpose of this
# directory is storage for playlists created by MPD. The server will use 
# playlist files not created by the server but only if they are in the MPD
# format. This setting defaults to playlist saving being disabled.
#
playlist_directory              "~/.mpd/playlists"
#
# This setting sets the location of the MPD database. This file is used to
# load the database at server start up and store the database while the 
# server is not up. This setting defaults to disabled which will allow
# MPD to accept files over ipc socket (using file:// protocol) or streaming
# files over an accepted protocol.
#
db_file                 "~/.mpd/database"
# 
# These settings are the locations for the daemon log files for the daemon.
# These logs are great for troubleshooting, depending on your log_level
# settings.
#
# The special value "syslog" makes MPD use the local syslog daemon. This
# setting defaults to logging to syslog, otherwise logging is disabled.
#
log_file                        "~/.mpd/log"
#
# This setting sets the location of the file which stores the process ID
# for use of mpd --kill and some init scripts. This setting is disabled by
# default and the pid file will not be stored.
#
pid_file                        "~/.mpd/pid"
#
# This setting sets the location of the file which contains information about
# most variables to get MPD back into the same general shape it was in before
# it was brought down. This setting is disabled by default and the server 
# state will be reset on server start up.
#
state_file                      "~/.mpd/state"
#
# The location of the sticker database.  This is a database which
# manages dynamic information attached to songs.
#
sticker_file                    "~/.mpd/sticker.sql"
#
###############################################################################


# General music daemon options ################################################
#
# This setting specifies the user that MPD will run as. MPD should never run as
# root and you may use this setting to make MPD change its user ID after
# initialization. This setting is disabled by default and MPD is run as the
# current user.
#
#user                           "nobody"
#
# This setting specifies the group that MPD will run as. If not specified
# primary group of user specified with "user" setting will be used (if set).
# This is useful if MPD needs to be a member of group such as "audio" to
# have permission to use sound card.
#
#group                          "nogroup"
#
# This setting sets the address for the daemon to listen on. Careful attention
# should be paid if this is assigned to anything other then the default, any.
# This setting can deny access to control of the daemon. Not effective if
# systemd socket activiation is in use.
#
# For network
#bind_to_address                "any"
#
# And for Unix Socket
#bind_to_address                "~/.mpd/socket"
#
# This setting is the TCP port that is desired for the daemon to get assigned
# to.
#
#port                           "6600"
#
# This setting controls the type of information which is logged. Available 
# setting arguments are "default", "secure" or "verbose". The "verbose" setting
# argument is recommended for troubleshooting, though can quickly stretch
# available resources on limited hardware storage.
#
#log_level                      "default"
#
# If you have a problem with your MP3s ending abruptly it is recommended that 
# you set this argument to "no" to attempt to fix the problem. If this solves
# the problem, it is highly recommended to fix the MP3 files with vbrfix
# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
# point gapless MP3 playback can be enabled.
#
#gapless_mp3_playback                   "yes"
#
# Setting "restore_paused" to "yes" puts MPD into pause mode instead
# of starting playback after startup.
#
#restore_paused "no"
#
# This setting enables MPD to create playlists in a format usable by other
# music players.
#
#save_absolute_paths_in_playlists       "no"
#
# This setting defines a list of tag types that will be extracted during the
# audio file discovery process. The complete list of possible values can be
# found in the user manual.
#metadata_to_use        "artist,album,title,track,name,genre,date,composer,performer,disc"
#
# This setting enables automatic update of MPD's database when files in 
# music_directory are changed.
#
#auto_update    "yes"
#
# Limit the depth of the directories being watched, 0 means only watch
# the music directory itself.  There is no limit by default.
#
#auto_update_depth "3"
#
###############################################################################


# Symbolic link behavior ######################################################
#
# If this setting is set to "yes", MPD will discover audio files by following 
# symbolic links outside of the configured music_directory.
#
#follow_outside_symlinks        "yes"
#
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links inside of the configured music_directory.
#
#follow_inside_symlinks         "yes"
#
###############################################################################


# Zeroconf / Avahi Service Discovery ##########################################
#
# If this setting is set to "yes", service information will be published with
# Zeroconf / Avahi.
#
#zeroconf_enabled               "yes"
#
# The argument to this setting will be the Zeroconf / Avahi unique name for
# this MPD server on the network.
#
#zeroconf_name                  "Music Player"
#
###############################################################################


# Permissions #################################################################
#
# If this setting is set, MPD will require password authorization. The password
# setting can be specified multiple times for different password profiles.
#
#password                        "password@read,add,control,admin"
#
# This setting specifies the permissions a user has who has not yet logged in. 
#
#default_permissions             "read,add,control,admin"
#
###############################################################################


# Database #######################################################################
#

#database {
#       plugin "proxy"
#       host "other.mpd.host"
#       port "6600"
#}

# Input #######################################################################
#

input {
        plugin "curl"
#       proxy "proxy.isp.com:8080"
#       proxy_user "user"
#       proxy_password "password"
}

#
###############################################################################

# Audio Output ################################################################
#

audio_output {
    type    "pulse"
    name    "pulse audio"
}

audio_output {
    type    "fifo"
    name    "my_fifo"
    path    "/tmp/mpd.fifo"
    format  "44100:16:2"
}

# MPD supports various audio output types, as well as playing through multiple 
# audio outputs at the same time, through multiple audio_output settings 
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
#
# An example of an ALSA output:
#
#audio_output {
#       type            "alsa"
#       name            "My ALSA Device"
##      device          "hw:0,0"        # optional
##      mixer_type      "hardware"      # optional
##      mixer_device    "default"       # optional
##      mixer_control   "PCM"           # optional
##      mixer_index     "0"             # optional
#}
#
# An example of an OSS output:
#
#audio_output {
#       type            "oss"
#       name            "My OSS Device"
##      device          "/dev/dsp"      # optional
##      mixer_type      "hardware"      # optional
##      mixer_device    "/dev/mixer"    # optional
##      mixer_control   "PCM"           # optional
#}
#
# An example of a shout output (for streaming to Icecast):
#
#audio_output {
#       type            "shout"
#       encoder         "vorbis"                # optional
#       name            "My Shout Stream"
#       host            "localhost"
#       port            "8000"
#       mount           "/mpd.ogg"
#       password        "hackme"
#       quality         "5.0"
#       bitrate         "128"
#       format          "44100:16:1"
##      protocol        "icecast2"              # optional
##      user            "source"                # optional
##      description     "My Stream Description" # optional
##      url             "http://example.com"    # optional
##      genre           "jazz"                  # optional
##      public          "no"                    # optional
##      timeout         "2"                     # optional
##      mixer_type      "software"              # optional
#}
#
# An example of a recorder output:
#
#audio_output {
#       type            "recorder"
#       name            "My recorder"
#       encoder         "vorbis"                # optional, vorbis or lame
#       path            "/var/lib/mpd/recorder/mpd.ogg"
##      quality         "5.0"                   # do not define if bitrate is defined
#       bitrate         "128"                   # do not define if quality is defined
#       format          "44100:16:1"
#}
#
# An example of a httpd output (built-in HTTP streaming server):
#
#audio_output {
#       type            "httpd"
#       name            "My HTTP Stream"
#       encoder         "vorbis"                # optional, vorbis or lame
#       port            "8000"
#       bind_to_address "0.0.0.0"               # optional, IPv4 or IPv6
##      quality         "5.0"                   # do not define if bitrate is defined
#       bitrate         "128"                   # do not define if quality is defined
#       format          "44100:16:1"
#       max_clients     "0"                     # optional 0=no limit
#}
#
# An example of a pulseaudio output (streaming to a remote pulseaudio server)
#
#audio_output {
#       type            "pulse"
#       name            "My Pulse Output"
##      server          "remote_server"         # optional
##      sink            "remote_server_sink"    # optional
#}
#
# An example of a winmm output (Windows multimedia API).
#
#audio_output {
#       type            "winmm"
#       name            "My WinMM output"
##      device          "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
#               or
##      device          "0"             # optional
##      mixer_type      "hardware"      # optional
#}
#
# An example of an openal output.
#
#audio_output {
#       type            "openal"
#       name            "My OpenAL output"
##      device          "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
#}
#
# An example of an sndio output.
#
#audio_output {
#       type            "sndio"
#       name            "sndio output"
#       mixer_type      "software"
#}
#
# An example of an OS X output:
#
#audio_output {
#       type            "osx"
#       name            "My OS X Device"
##      device          "Built-in Output"       # optional
##      channel_map      "-1,-1,0,1"    # optional
#}
#
## Example "pipe" output:
#
#audio_output {
#       type            "pipe"
#       name            "my pipe"
#       command         "aplay -f cd 2>/dev/null"
## Or if you're want to use AudioCompress
#       command         "AudioCompress -m | aplay -f cd 2>/dev/null"
## Or to send raw PCM stream through PCM:
#       command         "nc example.org 8765"
#       format          "44100:16:2"
#}
#
## An example of a null output (for no audio output):
#
#audio_output {
#       type            "null"
#       name            "My Null Output"
#       mixer_type      "none"                  # optional
#}
#
###############################################################################


# Normalization automatic volume adjustments ##################################
#
# This setting specifies the type of ReplayGain to use. This setting can have
# the argument "off", "album", "track" or "auto". "auto" is a special mode that
# chooses between "track" and "album" depending on the current state of
# random playback. If random playback is enabled then "track" mode is used.
# See <http://www.replaygain.org> for more details about ReplayGain.
# This setting is off by default.
#
#replaygain                     "album"
#
# This setting sets the pre-amp used for files that have ReplayGain tags. By
# default this setting is disabled.
#
#replaygain_preamp              "0"
#
# This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
# By default this setting is disabled.
#
#replaygain_missing_preamp      "0"
#
# This setting enables or disables ReplayGain limiting.
# MPD calculates actual amplification based on the ReplayGain tags
# and replaygain_preamp / replaygain_missing_preamp setting.
# If replaygain_limit is enabled MPD will never amplify audio signal
# above its original level. If replaygain_limit is disabled such amplification
# might occur. By default this setting is enabled.
#
#replaygain_limit               "yes"
#
# This setting enables on-the-fly normalization volume adjustment. This will
# result in the volume of all playing audio to be adjusted so the output has 
# equal "loudness". This setting is disabled by default.
#
#volume_normalization           "no"
#
###############################################################################

# Character Encoding ##########################################################
#
# If file or directory names do not display correctly for your locale then you 
# may need to modify this setting.
#
#filesystem_charset             "UTF-8"
#
###############################################################################
#+end_src

** msmtp
:PROPERTIES:
:header-args+: :tangle ~/.msmtprc
:END:

#+begin_src conf
# Set default values for all following accounts.
defaults
port 587
tls on
auth on
#tls_trust_file /etc/ssl/certs/ca-certificates.crt
logfile ~/.msmtp.log

# aminb
account aminb
host nix.aminb.org
tls_fingerprint 65:DD:B8:32:D8:CD:F1:DC:B6:34:EE:35:04:18:AC:09:F3:1D:6D:20:F2:4A:E2:BD:64:48:B7:1F:90:BD:C4:BA
tls_starttls on
from amin@aminb.org
user amin@aminb.org
passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg

# gnu
account gnu
host fencepost.gnu.org
# use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
tls_fingerprint 28:70:42:76:1C:EC:91:5F:D1:B3:27:A1:CD:3B:32:A4:8B:0B:DC:3A:CD:CA:F6:6F:E4:61:BA:69:D7:4D:0D:0B
tls_starttls on
from aminb@gnu.org
user aminb
passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg

# uwaterloo
account uwaterloo
host connect.uwaterloo.ca
tls_starttls on
from abandali@uwaterloo.ca
user abandali
passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
tls_trust_file /etc/ssl/certs/ca-certificates.crt

# uwaterloo (friendly address)
account uwaterloo-friendly : uwaterloo
from amin.bandali@uwaterloo.ca

# Set a default account
account default : aminb
#+end_src

** ncmpcpp

*** config
:PROPERTIES:
:header-args+: :tangle ~/.ncmpcpp/config
:END:

#+begin_src conf :tangle no
##############################################################
## This is the example configuration file. Copy it to       ##
## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
## and set up your preferences.                             ##
##############################################################
#
##### directories ######
##
## Directory for storing ncmpcpp related files.
## Changing it is useful if you want to store
## everything somewhere else and provide command
## line setting for alternative location to config
## file which defines that while launching ncmpcpp.
##
#
ncmpcpp_directory = ~/.ncmpcpp
#
##
## Directory for storing downloaded lyrics. It
## defaults to ~/.lyrics since other MPD clients
## (eg. ncmpc) also use that location.
##
#
#lyrics_directory = ~/.lyrics
#
##### connection settings #####
#
#mpd_host = localhost
#
#mpd_port = 6600
#
#mpd_connection_timeout = 5
#
## Needed for tag editor and file operations to work.
##
mpd_music_dir = ~/usr/music
#
#mpd_crossfade_time = 5
#
##### music visualizer #####
##
## Note: In order to make music visualizer work you'll
## need to use mpd fifo output, whose format parameter
## has to be set to 44100:16:1 for mono visualization
## or 44100:16:2 for stereo visualization. Example
## configuration (it has to be put into mpd.conf):
##
## audio_output {
##        type            "fifo"
##        name            "Visualizer feed"
##        path            "/tmp/mpd.fifo"
##        format          "44100:16:2"
## }
##
#
visualizer_fifo_path = /tmp/mpd.fifo
#
##
## Note: Below parameter is needed for ncmpcpp
## to determine which output provides data for
## visualizer and thus allow syncing between
## visualization and sound as currently there
## are some problems with it.
##
#
visualizer_output_name = my fifo
#
##
## If you set format to 44100:16:2, make it 'yes'.
##
visualizer_in_stereo = yes
#
##
## Multiply received samples by given value. Very
## useful for proper visualization of quiet music.
##
#visualizer_sample_multiplier = 1
#
##
## Note: Below parameter defines how often ncmpcpp
## has to "synchronize" visualizer and audio outputs.
## 30 seconds is optimal value, but if you experience
## synchronization problems, set it to lower value.
## Keep in mind that sane values start with >=10.
##
#
visualizer_sync_interval = 30
#
##
## Note: To enable spectrum frequency visualization
## you need to compile ncmpcpp with fftw3 support.
##
#
## Available values: spectrum, wave, wave_filled, ellipse.
##
visualizer_type = spectrum
#
#visualizer_look = ●▮
visualizer_look = "●•"
#
#visualizer_color = blue, cyan, green, yellow, magenta, red
#
## Alternative subset of 256 colors for terminals that support it.
##
#visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
#
##### system encoding #####
##
## ncmpcpp should detect your charset encoding
## but if it failed to do so, you can specify
## charset encoding you are using here.
##
## Note: You can see whether your ncmpcpp build
## supports charset detection by checking output
## of `ncmpcpp --version`.
##
## Note: Since MPD uses UTF-8 by default, setting
## this option makes sense only if your encoding
## is different.
##
#
#system_encoding = ""
#
##### delays #####
#
## Time of inactivity (in seconds) after playlist
## highlighting will be disabled (0 = always on).
##
#playlist_disable_highlight_delay = 5
#
## Defines how long messages are supposed to be visible.
##
#message_delay_time = 5
#
##### song format #####
##
## For a song format you can use:
##
## %l - length
## %f - filename
## %D - directory
## %a - artist
## %A - album artist
## %t - title
## %b - album
## %y - date
## %n - track number (01/12 -> 01)
## %N - full track info (01/12 -> 01/12)
## %g - genre
## %c - composer
## %p - performer
## %d - disc
## %C - comment
## %P - priority
## $R - begin right alignment
##
## If you want to make sure that a part of the format is displayed
## only when certain tags are present, you can archieve it by
## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
## It is also possible to define a list of alternatives by providing
## several groups and separating them with '|', e.g. '{%t}|{%f}'
## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
## present.
##
## Note: If you want to set limit on maximal length of a tag, just
## put the appropriate number between % and character that defines
## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
##
## In addition, formats support markers used for text attributes.
## They are followed by character '$'. After that you can put:
##
## - 0 - default window color (discards all other colors)
## - 1 - black
## - 2 - red
## - 3 - green
## - 4 - yellow
## - 5 - blue
## - 6 - magenta
## - 7 - cyan
## - 8 - white
## - 9 - end of current color
## - b - bold text
## - u - underline text
## - r - reverse colors
## - a - use alternative character set
##
## If you don't want to use a non-color attribute anymore, just put it
## again, but this time insert character '/' between '$' and attribute
## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
## or filename with reversed colors.
##
## If you want to use 256 colors and/or background colors in formats
## (the naming scheme is described below in section about color
## definitions), it can be done with the syntax $(COLOR), e.g. to set
## the artist tag to one of the non-standard colors and make it have
## yellow background, you need to write $(197_yellow)%a$(end). Note
## that for standard colors this is interchangable with attributes
## listed above.
##
## Note: colors can be nested.
##
#
#song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
#
#song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
#
#song_library_format = {%n - }{%t}|{%f}
#
#
#alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
#
#alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
#
#now_playing_prefix = $b
#
#now_playing_suffix = $/b
#
#browser_playlist_prefix = "$2playlist$9 "
#
#selected_item_prefix = $6
#
#selected_item_suffix = $9
#
#modified_item_prefix = $3> $9
#
##
## Note: attributes are not supported for the following variables.
##
#song_window_title_format = {%a - }{%t}|{%f}
##
## Note: Below variables are used for sorting songs in browser.
## The sort mode determines how songs are sorted, and can be used
## in combination with a sort format to specify a custom sorting format.
## Available values for browser_sort_mode are "name", "mtime", "format"
## and "noop".
##
#
#browser_sort_mode = name
#
#browser_sort_format = {%a - }{%t}|{%f} {(%l)}
#
##### columns settings #####
##
## syntax of song columns list format is "column column etc."
##
## - syntax for each column is:
##
## (width of the column)[color of the column]{displayed tag}
##
## Note: Width is by default in %, if you want a column to
## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
## will be the column that take 10% of screen (so the real width
## will depend on actual screen size), whereas (10f)[white]{a}
## will take 10 terminal cells, no matter how wide the screen is.
##
## - color is optional (if you want the default one,
##   leave the field empty).
##
## Note: You can give a column additional attributes by putting appropriate
## character after displayed tag character. Available attributes are:
##
## - r - column will be right aligned
## - E - if tag is empty, empty tag marker won't be displayed
##
## You can also:
##
## - give a column custom name by putting it after attributes,
##   separated with character ':', e.g. {lr:Length} gives you
##   right aligned column of lengths named "Length".
##
## - define sequence of tags, that have to be displayed in case
##   predecessor is empty in a way similar to the one in classic
##   song format, i.e. using '|' character, e.g. {a|c|p:Owner}
##   creates column named "Owner" that tries to display artist
##   tag and then composer and performer if previous ones are
##   not available.
##
#
#song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
#
##### various settings #####
#
##
## Note: Custom command that will be executed each
## time song changes. Useful for notifications etc.
##
#execute_on_song_change = ""
#
#playlist_show_mpd_host = no
#
#playlist_show_remaining_time = no
#
#playlist_shorten_total_times = no
#
#playlist_separate_albums = no
#
##
## Note: Possible display modes: classic, columns.
##
#playlist_display_mode = columns
#
#browser_display_mode = classic
#
#search_engine_display_mode = classic
#
#playlist_editor_display_mode = classic
#
#discard_colors_if_item_is_selected = yes
#
#incremental_seeking = yes
#
#seek_time = 1
#
#volume_change_step = 2
#
#autocenter_mode = no
#
#centered_cursor = no
#
##
## Note: You can specify third character which will
## be used to build 'empty' part of progressbar.
##
#progressbar_look = =>
progressbar_look = "─╼╶"
#progressbar_look = "─⊙╶"
#
#progressbar_boldness = yes
#
## Available values: database, playlist.
##
#default_place_to_search_in = database
#
## Available values: classic, alternative.
##
#user_interface = classic
#
#data_fetching_delay = yes
#
## Available values: artist, album_artist, date, genre, composer, performer.
##
#media_library_primary_tag = artist
#
## Available values: wrapped, normal.
##
#default_find_mode = wrapped
#
#default_tag_editor_pattern = %n - %t
#
#header_visibility = yes
#
#statusbar_visibility = yes
#
#titles_visibility = yes
#
#header_text_scrolling = yes
#
#cyclic_scrolling = no
#
#lines_scrolled = 2
#
#follow_now_playing_lyrics = no
#
#fetch_lyrics_for_current_song_in_background = no
#
#store_lyrics_in_song_dir = no
#
#generate_win32_compatible_filenames = yes
#
#allow_for_physical_item_deletion = no
#
##
## Note: If you set this variable, ncmpcpp will try to
## get info from last.fm in language you set and if it
## fails, it will fall back to english. Otherwise it will
## use english the first time.
##
## Note: Language has to be expressed as an ISO 639 alpha-2 code.
##
#lastfm_preferred_language = en
#
#show_hidden_files_in_local_browser = no
#
##
## How shall screen switcher work?
##
## - "previous" - switch between the current and previous screen.
## - "screen1,...,screenN" - switch between given sequence of screens.
##
## Screens available for use: help, playlist, browser, search_engine,
## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
##
#screen_switcher_mode = playlist, browser
#
##
## Note: You can define startup screen
## by choosing screen from the list above.
##
#startup_screen = playlist
#
##
## Note: You can define startup slave screen
## by choosing screen from the list above or
## an empty value for no slave screen.
##
#startup_slave_screen = ""
#
#startup_slave_screen_focus = no
#
##
## Default width of locked screen (in %).
## Acceptable values are from 20 to 80.
##
#
#locked_screen_width_part = 50
#
#ask_for_locked_screen_width_part = yes
#
#jump_to_now_playing_song_at_start = yes
#
#ask_before_clearing_playlists = yes
#
#clock_display_seconds = no
#
#display_volume_level = yes
#
#display_bitrate = no
#
#display_remaining_time = no
#
## Available values: none, basic, extended, perl.
##
#regular_expressions = perl
#
##
## Note: If below is enabled, ncmpcpp will ignore leading
## "The" word while sorting items in browser, tags in
## media library, etc.
##
#ignore_leading_the = no
#
#block_search_constraints_change_if_items_found = yes
#
#mouse_support = yes
#
#mouse_list_scroll_whole_page = yes
#
#empty_tag_marker = <empty>
#
#tags_separator = " | "
#
#tag_editor_extended_numeration = no
#
#media_library_sort_by_mtime = no
#
#enable_window_title = yes
#
##
## Note: You can choose default search mode for search
## engine. Available modes are:
##
## - 1 - use mpd built-in searching (no regexes, pattern matching)
## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
##       but if your mpd is on a remote machine, downloading big database
##       to process it can take a while
## - 3 - match only exact values (this mode uses mpd function for searching
##       in database and local one for searching in current playlist)
##
#
#search_engine_default_search_mode = 1
#
#external_editor = nano
#
## Note: set to yes if external editor is a console application.
##
#use_console_editor = yes
#
##### colors definitions #####
##
## It is possible to set a background color by setting a color
## value "<foreground>_<background>", e.g. red_black will set
## foregound color to red and background color to black.
##
## In addition, for terminals that support 256 colors it
## is possible to set one of them by using a number in range
## [1, 256] instead of color name, e.g. numerical value
## corresponding to red_black is 2_1. To find out if the
## terminal supports 256 colors, run ncmpcpp and check out
## the bottom of the help screen for list of available colors
## and their numerical values.
##
## Note: due to technical limitations of ncurses, if 256 colors
## are used, it is possible to either use only the colors with
## default background color, or all pairs from 1_1 up to 254_127,
## depending on the ncurses version used.
##
#
#colors_enabled = yes
#
#empty_tag_color = cyan
#
#header_window_color = default
#
#volume_color = default
#
#state_line_color = default
#
#state_flags_color = default
#
#main_window_color = yellow
#
#color1 = white
#
#color2 = green
#
#main_window_highlight_color = yellow
#
#progressbar_color = black
#
#progressbar_elapsed_color = green
#
#statusbar_color = default
#
#alternative_ui_separator_color = black
#
#active_column_color = red
#
#window_border_color = green
#
#active_window_border = red
#
#+end_src

*** bindings
:PROPERTIES:
:header-args+: :tangle ~/.ncmpcpp/bindings
:END:

#+begin_src conf :tangle no
def_key "j"
    scroll_down
def_key "k"
    scroll_up

def_key "ctrl-u"
    page_up
def_key "ctrl-d"
    page_down

def_key "h"
    previous_column
def_key "l"
    next_column

def_key "."
    show_lyrics

def_key "n"
    next_found_item
def_key "N"
    previous_found_item

def_key "J"
    move_sort_order_down
def_key "K"
    move_sort_order_up
#+end_src

** notmuch

*** notmuch-config
:PROPERTIES:
:header-args+: :tangle ~/.notmuch-config
:END:

#+begin_src conf
# .notmuch-config - Configuration file for the notmuch mail system
#
# For more information about notmuch, see https://notmuchmail.org

# Database configuration
#
# The only value supported here is 'path' which should be the top-level
# directory where your mail currently exists and to where mail will be
# delivered in the future. Files should be individual email messages.
# Notmuch will store its database within a sub-directory of the path
# configured here named ".notmuch".
#
[database]
path=/home/amin/mail

# User configuration
#
# Here is where you can let notmuch know how you would like to be
# addressed. Valid settings are
#
#       name            Your full name.
#       primary_email   Your primary email address.
#       other_email     A list (separated by ';') of other email addresses
#                       at which you receive email.
#
# Notmuch will use the various email addresses configured here when
# formatting replies. It will avoid including your own addresses in the
# recipient list of replies, and will set the From address based on the
# address to which the original email was addressed.
#
[user]
name=Amin Bandali
primary_email=amin@aminb.org
other_email=abandali@uwaterloo.ca;amin.bandali@uwaterloo.ca;aminb@gnu.org;

# Configuration for "notmuch new"
#
# The following options are supported here:
#
#       tags    A list (separated by ';') of the tags that will be
#               added to all messages incorporated by "notmuch new".
#
#       ignore  A list (separated by ';') of file and directory names
#               that will not be searched for messages by "notmuch new".
#
#               NOTE: *Every* file/directory that goes by one of those
#               names will be ignored, independent of its depth/location
#               in the mail store.
#
[new]
tags=new;
#tags=unread;inbox;
ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/

# Search configuration
#
# The following option is supported here:
#
#       exclude_tags
#               A ;-separated list of tags that will be excluded from
#               search results by default.  Using an excluded tag in a
#               query will override that exclusion.
#
[search]
exclude_tags=deleted;spam;

# Maildir compatibility configuration
#
# The following option is supported here:
#
#       synchronize_flags      Valid values are true and false.
#
#       If true, then the following maildir flags (in message filenames)
#       will be synchronized with the corresponding notmuch tags:
#
#               Flag    Tag
#               ----    -------
#               D       draft
#               F       flagged
#               P       passed
#               R       replied
#               S       unread (added when 'S' flag is not present)
#
#       The "notmuch new" command will notice flag changes in filenames
#       and update tags, while the "notmuch tag" and "notmuch restore"
#       commands will notice tag changes and update flags in filenames
#
[maildir]
synchronize_flags=true

# Cryptography related configuration
#
# The following option is supported here:
#
#       gpg_path
#               binary name or full path to invoke gpg.
#
[crypto]
gpg_path=gpg
#+end_src

*** pre-new hook
:PROPERTIES:
:header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
:END:

#+begin_src sh
touch /tmp/gnusieve.log
sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
             -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
#+end_src

*** post-new hook
:PROPERTIES:
:header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
:END:

#+begin_src sh
# apply sent tag to messages sent by me
notmuch tag -new +sent -- from:amin@aminb.org or from:aminb@gnu.org or from:abandali@uwaterloo.ca or from:amin.bandali@uwaterloo.ca

# initial tagging
notmuch tag -latest -- tag:latest
notmuch tag +inbox +unread +latest -new -- tag:new


# apply tags to lists

# <aminb>
notmuch tag -inbox +lists/~sircmpwn/srht-admins   -- folder:amin/lists/~sircmpwn/srht-admins
notmuch tag -inbox +lists/~sircmpwn/srht-announce -- folder:amin/lists/~sircmpwn/srht-announce
notmuch tag -inbox +lists/~sircmpwn/srht-dev      -- folder:amin/lists/~sircmpwn/srht-dev
notmuch tag -inbox +lists/~sircmpwn/srht-discuss  -- folder:amin/lists/~sircmpwn/srht-discuss

notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
notmuch tag -inbox +lists/haskell-weekly   -- folder:amin/lists/haskell-weekly

notmuch tag -inbox +pay -- folder:amin/pay
# </aminb>

# <uw>
notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463

notmuch tag -inbox +lists/clvsingle        -- folder:uwaterloo/lists/Clvsingle
notmuch tag -inbox +lists/gsa              -- folder:uwaterloo/lists/GSA
notmuch tag -inbox +lists/math-grad        -- folder:uwaterloo/lists/Math-grad
notmuch tag -inbox +lists/scs-grads        -- folder:uwaterloo/lists/scs-grads
notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
# </uw>

# <gnu>
notmuch tag -inbox +lists/emacs-devel       -- folder:gnu/l/emacs-devel
notmuch tag -inbox +lists/emacs-orgmode     -- folder:gnu/l/emacs-orgmode
notmuch tag -inbox +lists/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
notmuch tag -inbox +lists/fencepost-users   -- folder:gnu/l/fencepost-users
notmuch tag -inbox +lists/guix-devel        -- folder:gnu/l/guix-devel
notmuch tag -inbox +lists/guile-devel       -- folder:gnu/l/guile-devel
notmuch tag -inbox +lists/help-gnu-emacs    -- folder:gnu/l/help-gnu-emacs
notmuch tag -inbox +lists/info-gnu-emacs    -- folder:gnu/l/info-gnu-emacs
notmuch tag -inbox +lists/www-commits       -- folder:gnu/l/www-commits
notmuch tag -inbox +lists/www-discuss       -- folder:gnu/l/www-discuss
notmuch tag -inbox +webmasters              -- folder:gnu/webmasters

notmuch tag -inbox +lists/deepspec          -- folder:gnu/l/deepspec
notmuch tag -inbox +lists/haskell-cafe      -- folder:gnu/l/haskell-cafe
notmuch tag -inbox +lists/haskell-art       -- folder:gnu/l/haskell-art
notmuch tag -inbox +lists/notmuch           -- folder:gnu/l/notmuch
# </gnu>

notmuch tag -inbox -unread +archive/notmuch     -- path:archive/notmuch/**
notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**
#+end_src

*** notmuch.service
:PROPERTIES:
:header-args+: :tangle ~/.config/systemd/user/notmuch.service
:END:

#+begin_src conf :tangle no
[Unit]
Description=notmuch service

[Service]
Type=oneshot
ExecStart=/usr/bin/notmuch new
StandardOutput=syslog
StandardError=syslog
#+end_src

*** notmuch.timer
:PROPERTIES:
:header-args+: :tangle ~/.config/systemd/user/notmuch.timer
:END:

#+begin_src conf :tangle no
[Unit]
Description=notmuch timer

[Timer]
OnCalendar=*:0/5
Persistent=true
Unit=notmuch.service

[Install]
WantedBy=timers.target
#+end_src

** offlineimap

*** offlineimaprc
:PROPERTIES:
:header-args+: :tangle ~/.offlineimaprc
:END:

#+begin_src conf :tangle no
[general]
pythonfile = ~/.offlineimap.py
accounts = Gmail, aminb
maxsyncaccounts = 3

[Account Gmail]
localrepository = GmailL
remoterepository = GmailR

[Account aminb]
localrepository = aminbL
remoterepository = aminbR

[Repository GmailL]
type = Maildir
localfolders = ~/Maildir/Gmail

[Repository GmailR]
type = IMAP
remotehost = imap.gmail.com
remoteusereval = mailuser("gmail")
remotepasseval = mailpasswd("gmail")
sslcacertfile = /etc/ssl/certs/ca-certificates.crt
ssl = yes
folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
maxconnections = 1
realdelete = no

[Repository aminbL]
type = Maildir
localfolders = ~/Maildir/aminb

[Repository aminbR]
type = IMAP
remotehost = mail.aminb.org
remoteusereval = mailuser("aminb")
remotepasseval = mailpasswd("aminb")
sslcacertfile = /etc/ssl/certs/ca-certificates.crt
ssl = yes
folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
maxconnections = 1
realdelete = no
#+end_src

*** offlineimap.py
:PROPERTIES:
:header-args+: :tangle ~/.offlineimap.py
:END:

#+begin_src python :tangle no
import os
import subprocess

def mailpasswd(acct):
    acct = os.path.basename(acct)
    path = "/home/amin/.passwd/%s.gpg" % acct
    args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
    try:
        return subprocess.check_output(args).strip()
    except subprocess.CalledProcessError:
        return ""

def mailuser(acct):
    acct = os.path.basename(acct)
    path = "/home/amin/.passwd/%s" % acct
    args = ["cat", path]
    try:
        return subprocess.check_output(args).strip()
    except subprocess.CalledProcessError:
        return ""

def prime_gpg_agent():
  ret = False
  i = 1
  while not ret:
    ret = (mailpasswd("prime") == "prime")
    if i > 2:
      from offlineimap.ui import getglobalui
      sys.stderr.write("Error reading in passwords. Terminating.\n")
      getglobalui().terminate()
    i += 1
  return ret

prime_gpg_agent()
#+end_src

** pigeonhole
*** gnu.sieve
:PROPERTIES:
:header-args+: :tangle ~/sieve/gnu.sieve :comments none
:END:

#+begin_src conf
require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags", "include" ];

if anyof (
  address :is "from" "webmasters@gnu.org",
  address :is "from" "webmasters-comment@gnu.org") {
  fileinto :create "webmasters";
  stop;
}

include :personal "lists";
#+end_src

*** lists.sieve
:PROPERTIES:
:header-args+: :tangle ~/sieve/lists.sieve :comments none
:END:

#+begin_src conf
require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags",
 "include" ];

if anyof (
    header :contains "list-id" "<emacs-devel.gnu.org>",
    header :contains "list-id" "<emacs-orgmode.gnu.org>",
    header :contains "list-id" "<emacsconf-discuss.gnu.org>",
    header :contains "list-id" "<fencepost-users.gnu.org>",
    header :contains "list-id" "<guix-devel.gnu.org>",
    header :contains "list-id" "<guile-devel.gnu.org>",
    header :contains "list-id" "<help-gnu-emacs.gnu.org>",
    header :contains "list-id" "<info-gnu-emacs.gnu.org>",
    header :contains "list-id" "<www-commits.gnu.org>",
    header :contains "list-id" "<www-discuss.gnu.org>",
    header :contains "list-id" "<deepspec.lists.cs.princeton.edu>",
    header :contains "list-id" "<haskell-cafe.haskell.org>",
    header :contains "list-id" "<haskell-art.we.lurk.org>",
    header :contains "list-id" "<notmuch.notmuchmail.org>") {
    if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
        set :lower "listname" "${1}";
        fileinto :create "l/${listname}";
    }
}
#+end_src

** polybar

*** config
:PROPERTIES:
:header-args+: :tangle ~/.config/polybar/config
:END:

#+begin_src conf :tangle no
;=====================================================
;
;   To learn more about how to configure Polybar
;   go to https://github.com/jaagr/polybar
;
;   The README contains alot of information
;
;=====================================================

[colors]
;background = ${xrdb:color0:#222}
background = #222
background-alt = #444
;foreground = ${xrdb:color7:#222}
foreground = #eee
foreground-alt = #888
primary = #ffb52a
secondary = #e60053
alert = #bd2c40

[bar/main]
;monitor = ${env:MONITOR:HDMI-1}
width = 100%
height = 27
;offset-x = 1%
;offset-y = 1%
radius = 3.0
fixed-center = true

background = ${colors.background}
foreground = ${colors.foreground}

line-size = 3
line-color = #f00

border-size = 4
border-color = #00000000

padding-left = 0
padding-right = 2

module-margin-left = 2
module-margin-right = 2

font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
font-2 = Wuncon Siji:pixelsize=10;1
font-3 = FontAwesome:pixelsize=10;1

modules-left = bspwm xwindow
modules-center = 
modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu

tray-position = right
tray-padding = 1
;tray-transparent = true
;tray-background = #0063ff
tray-maxsize = 18

wm-restack = bspwm

;override-redirect = true

scroll-up = bspwm-desknext
scroll-down = bspwm-deskprev

[module/xwindow]
type = internal/xwindow
label = %title:0:50:...%

[module/xkeyboard]
type = internal/xkeyboard
blacklist-0 = num lock

format-prefix = " "
format-prefix-foreground = ${colors.foreground-alt}
format-prefix-underline = ${colors.secondary}

label-layout = %layout%
label-layout-underline = ${colors.secondary}

label-indicator-padding = 2
label-indicator-margin = 1
label-indicator-background = ${colors.secondary}
label-indicator-underline = ${colors.secondary}

[module/filesystem]
type = internal/fs
interval = 25

mount-0 = /

label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
label-unmounted = %mountpoint% not mounted
label-unmounted-foreground = ${colors.foreground-alt}

[module/bspwm]
type = internal/bspwm

label-focused = %index%
label-focused-background = ${colors.background-alt}
label-focused-underline= ${colors.primary}
label-focused-padding = 2

label-occupied = %index%
label-occupied-padding = 2

label-urgent = %index%!
label-urgent-background = ${colors.alert}
label-urgent-padding = 2

label-empty = %index%
label-empty-foreground = ${colors.foreground-alt}
label-empty-padding = 2

[module/i3]
type = internal/i3
format = <label-state> <label-mode>
index-sort = true
wrapping-scroll = false

; Only show workspaces on the same output as the bar
;pin-workspaces = true

label-mode-padding = 2
label-mode-foreground = #000
label-mode-background = ${colors.primary}

; focused = Active workspace on focused monitor
label-focused = %index%
label-focused-background = ${module/bspwm.label-focused-background}
label-focused-underline = ${module/bspwm.label-focused-underline}
label-focused-padding = ${module/bspwm.label-focused-padding}

; unfocused = Inactive workspace on any monitor
label-unfocused = %index%
label-unfocused-padding = ${module/bspwm.label-occupied-padding}

; visible = Active workspace on unfocused monitor
label-visible = %index%
label-visible-background = ${self.label-focused-background}
label-visible-underline = ${self.label-focused-underline}
label-visible-padding = ${self.label-focused-padding}

; urgent = Workspace with urgency hint set
label-urgent = %index%
label-urgent-background = ${module/bspwm.label-urgent-background}
label-urgent-padding = ${module/bspwm.label-urgent-padding}

[module/mpd]
type = internal/mpd
format-online = <label-song>  <icon-prev> <icon-stop> <toggle> <icon-next>

icon-prev = 
icon-stop = 
icon-play = 
icon-pause = 
icon-next = 

label-song-maxlen = 25
label-song-ellipsis = true

[module/xbacklight]
type = internal/xbacklight

format = <label> <bar>
label = BL

bar-width = 10
bar-indicator = |
bar-indicator-foreground = #ff
bar-indicator-font = 2
bar-fill = ─
bar-fill-font = 2
bar-fill-foreground = #9f78e1
bar-empty = ─
bar-empty-font = 2
bar-empty-foreground = ${colors.foreground-alt}

[module/backlight-acpi]
inherit = module/xbacklight
type = internal/backlight
;card = intel_backlight
card = mba6x_backlight

[module/cpu]
type = internal/cpu
interval = 2
format-prefix = " "
format-prefix-foreground = ${colors.foreground-alt}
format-underline = #f90000
label = %percentage%%

[module/memory]
type = internal/memory
interval = 2
format-prefix = " "
format-prefix-foreground = ${colors.foreground-alt}
format-underline = #4bffdc
label = %percentage_used%%

[module/wlan]
type = internal/network
interface = 
interval = 3.0

format-connected = <ramp-signal> <label-connected>
format-connected-underline = #9f78e1
label-connected = %essid%

format-disconnected =
;format-disconnected = <label-disconnected>
;format-disconnected-underline = ${self.format-connected-underline}
;label-disconnected = %ifname% disconnected
;label-disconnected-foreground = ${colors.foreground-alt}

ramp-signal-0 = 
ramp-signal-1 = 
ramp-signal-2 = 
ramp-signal-3 = 
ramp-signal-4 = 
ramp-signal-foreground = ${colors.foreground-alt}

[module/eth]
type = internal/network
interface = 
interval = 3.0

format-connected-underline = #55aa55
format-connected-prefix = " "
format-connected-prefix-foreground = ${colors.foreground-alt}
label-connected = %local_ip%

format-disconnected =
;format-disconnected = <label-disconnected>
;format-disconnected-underline = ${self.format-connected-underline}
;label-disconnected = %ifname% disconnected
;label-disconnected-foreground = ${colors.foreground-alt}

[module/date]
type = internal/date
interval = 5

date =
date-alt = " %Y-%m-%d"

time = %H:%M
time-alt = %H:%M:%S

format-prefix = 
format-prefix-foreground = ${colors.foreground-alt}
format-underline = #0a6cf5

label = %date% %time%

[module/volume]
type = internal/volume

format-volume = <label-volume> <bar-volume>
label-volume = vol
label-volume-foreground = ${root.foreground}

format-muted-prefix = " "
format-muted-foreground = ${colors.foreground-alt}
label-muted = mute

bar-volume-width = 10
bar-volume-foreground-0 = #55aa55
bar-volume-foreground-1 = #55aa55
bar-volume-foreground-2 = #55aa55
bar-volume-foreground-3 = #55aa55
bar-volume-foreground-4 = #55aa55
bar-volume-foreground-5 = #f5a70a
bar-volume-foreground-6 = #ff5555
bar-volume-gradient = false
bar-volume-indicator = |
bar-volume-indicator-font = 2
bar-volume-fill = ─
bar-volume-fill-font = 2
bar-volume-empty = ─
bar-volume-empty-font = 2
bar-volume-empty-foreground = ${colors.foreground-alt}

[module/battery]
type = internal/battery
battery = BAT0
adapter = ADP1
full-at = 64

format-charging = <animation-charging> <label-charging>
format-charging-underline = #ffb52a

format-discharging = <ramp-capacity> <label-discharging>
format-discharging-underline = ${self.format-charging-underline}

format-full-prefix = " "
format-full-prefix-foreground = ${colors.foreground-alt}
format-full-underline = ${self.format-charging-underline}

ramp-capacity-0 = 
ramp-capacity-1 = 
ramp-capacity-2 = 
ramp-capacity-foreground = ${colors.foreground-alt}

animation-charging-0 = 
animation-charging-1 = 
animation-charging-2 = 
animation-charging-foreground = ${colors.foreground-alt}
animation-charging-framerate = 750

[module/temperature]
type = internal/temperature
thermal-zone = 1
warn-temperature = 66

format = <ramp> <label>
format-underline = #f50a4d
format-warn = <ramp> <label-warn>
format-warn-underline = ${self.format-underline}

label = %temperature%
label-warn = %temperature%
label-warn-foreground = ${colors.secondary}

ramp-0 = 
ramp-1 = 
ramp-2 = 
ramp-foreground = ${colors.foreground-alt}

[module/powermenu]
type = custom/menu

format-spacing = 1

label-open = 
label-open-foreground = ${colors.secondary}
label-close =  cancel
label-close-foreground = ${colors.secondary}
label-separator = |
label-separator-foreground = ${colors.foreground-alt}

menu-0-0 = reboot
menu-0-0-exec = menu-open-1
menu-0-1 = power off
menu-0-1-exec = menu-open-2

menu-1-0 = cancel
menu-1-0-exec = menu-open-0
menu-1-1 = reboot
menu-1-1-exec = sudo reboot

menu-2-0 = power off
menu-2-0-exec = sudo poweroff
menu-2-1 = cancel
menu-2-1-exec = menu-open-0

[module/mail]
type = custom/script
interval = 60
format = <label>
format-prefix = " "
format-prefix-foreground = ${colors.foreground-alt}
format-underline = #0a6cf5
exec = notmuch count tag:unread

[settings]
screenchange-reload = true
;compositing-background = xor
;compositing-background = screen
;compositing-foreground = source
;compositing-border = over

[global/wm]
margin-top = 0
margin-bottom = 0

; vim:ft=dosini
#+end_src

*** polybar-launch
:PROPERTIES:
:header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
:END:

#+begin_src sh :tangle no
# Terminate already running bar instances
killall -q polybar

# Wait until the processes have been shut down
while pgrep -x polybar >/dev/null; do sleep 1; done

# Launch main bar
polybar main &

echo "Bars launched..."
#+end_src

** PowerTOP
:PROPERTIES:
:header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
:END:

#+begin_src conf
[Unit]
Description=Powertop tunings

[Service]
ExecStart=/usr/bin/powertop --auto-tune
RemainAfterExit=true

[Install]
WantedBy=multi-user.target
#+end_src

** ranger

*** rc.conf
:PROPERTIES:
:header-args+: :tangle ~/.config/ranger/rc.conf
:END:

#+begin_src conf :tangle no
# ===================================================================
# This file contains the default startup commands for ranger.
# To change them, it is recommended to create the file
# ~/.config/ranger/rc.conf and add your custom commands there.
#
# If you copy this whole file there, you may want to set the environment
# variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
#
# The purpose of this file is mainly to define keybindings and settings.
# For running more complex python code, please create a plugin in "plugins/" or
# a command in "commands.py".
#
# Each line is a command that will be run before the user interface
# is initialized.  As a result, you can not use commands which rely
# on the UI such as :delete or :mark.
# ===================================================================

# ===================================================================
# == Options
# ===================================================================

# How many columns are there, and what are their relative widths?
set column_ratios 1,3,4

# Which files should be hidden? (regular expression)
set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$

# Show hidden files? You can toggle this by typing 'zh'
set show_hidden false

# Ask for a confirmation when running the "delete" command?
# Valid values are "always" (default), "never", "multiple"
# With "multiple", ranger will ask only if you delete multiple files at once.
set confirm_on_delete multiple

# Which script is used to generate file previews?
# ranger ships with scope.sh, a script that calls external programs (see
# README for dependencies) to preview images, archives, etc.
set preview_script ~/.config/ranger/scope.sh

# Use the external preview script or display simple plain text previews?
set use_preview_script true

# Open all images in this directory when running certain image viewers
# like feh or sxiv?  You can still open selected files by marking them.
set open_all_images true

# Be aware of version control systems and display information.
set vcs_aware false

# State of the three backends git, hg, bzr. The possible states are
# disabled, local (only show local info), enabled (show local and remote
# information).
set vcs_backend_git enabled
set vcs_backend_hg disabled
set vcs_backend_bzr disabled

# Preview images in full color with the external command "w3mimgpreview"?
# This requires the console web browser "w3m" and a supported terminal.
# It has been successfully tested with "xterm" and "urxvt" without tmux.
set preview_images true

# Use a unicode "..." character to mark cut-off filenames?
set unicode_ellipsis false

# Show dotfiles in the bookmark preview box?
set show_hidden_bookmarks true

# Which colorscheme to use?  These colorschemes are available by default:
# default, jungle, snow
set colorscheme default

# Preview files on the rightmost column?
# And collapse (shrink) the last column if there is nothing to preview?
set preview_files true
set preview_directories true
set collapse_preview true

# Save the console history on exit?
set save_console_history true

# Draw the status bar on top of the browser window (default: bottom)
set status_bar_on_top false

# Draw a progress bar in the status bar which displays the average state of all
# currently running tasks which support progress bars?
set draw_progress_bar_in_status_bar true

# Draw borders around columns?
set draw_borders true

# Display the directory name in tabs?
set dirname_in_tabs false

# Enable the mouse support?
set mouse_enabled true

# Display the file size in the main column or status bar?
set display_size_in_main_column true
set display_size_in_status_bar true

# Display files tags in all columns or only in main column?
set display_tags_in_all_columns true

# Set a title for the window?
set update_title false

# Set the title to "ranger" in the tmux program?
set update_tmux_title false

# Shorten the title if it gets long?  The number defines how many
# directories are displayed at once, 0 turns off this feature.
set shorten_title 3

# Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
set tilde_in_titlebar false

# How many directory-changes or console-commands should be kept in history?
set max_history_size 20
set max_console_history_size 50

# Try to keep so much space between the top/bottom border when scrolling:
set scroll_offset 8

# Flush the input after each key hit?  (Noticable when ranger lags)
set flushinput true

# Padding on the right when there's no preview?
# This allows you to click into the space to run the file.
set padding_right true

# Save bookmarks (used with mX and `X) instantly?
# This helps to synchronize bookmarks between multiple ranger
# instances but leads to *slight* performance loss.
# When false, bookmarks are saved when ranger is exited.
set autosave_bookmarks true

# You can display the "real" cumulative size of directories by using the
# command :get_cumulative_size or typing "dc".  The size is expensive to
# calculate and will not be updated automatically.  You can choose
# to update it automatically though by turning on this option:
set autoupdate_cumulative_size false

# Turning this on makes sense for screen readers:
set show_cursor false

# One of: size, basename, mtime, type
set sort natural

# Additional sorting options
set sort_reverse false
set sort_case_insensitive true
set sort_directories_first true

# Enable this if key combinations with the Alt Key don't work for you.
# (Especially on xterm)
set xterm_alt_key false

# ===================================================================
# == Local Options
# ===================================================================
# You can set local options that only affect a single directory.

# Examples:
# setlocal path=~/downloads sort mtime

# ===================================================================
# == Command Aliases in the Console
# ===================================================================

alias e    edit
alias q    quit
alias q!   quitall
alias qall quitall
alias setl setlocal

alias filter     scout -prt
alias find       scout -aet
alias mark       scout -mr
alias unmark     scout -Mr
alias search     scout -rs
alias search_inc scout -rts
alias travel     scout -aefiklst

# ===================================================================
# == Define keys for the browser
# ===================================================================

# Basic
map     Q quit!
map     q quit
copymap q ZZ ZQ

map R     reload_cwd
map <C-r> reset
map <C-l> redraw_window
map <C-c> abort
map <esc> change_mode normal

map i display_file
map ? help
map W display_log
map w taskview_open
map S shell $SHELL

map :  console
map ;  console
map !  console shell 
map @  console -p6 shell  %%s
map #  console shell -p 
map s  console shell 
map r  chain draw_possible_programs; console open_with 
map f  console find 
map cd console cd 

# Tagging / Marking
map t       tag_toggle
map ut      tag_remove
map "<any>  tag_toggle tag=%any
map <Space> mark_files toggle=True
map v       mark_files all=True toggle=True
map uv      mark_files all=True val=False
map V       toggle_visual_mode
map uV      toggle_visual_mode reverse=True

# For the nostalgics: Midnight Commander bindings
map <F1> help
map <F3> display_file
map <F4> edit
map <F5> copy
map <F6> cut
map <F7> console mkdir 
map <F8> console delete
map <F10> exit

# In case you work on a keyboard with dvorak layout
map <UP>       move up=1
map <DOWN>     move down=1
map <LEFT>     move left=1
map <RIGHT>    move right=1
map <HOME>     move to=0
map <END>      move to=-1
map <PAGEDOWN> move down=1   pages=True
map <PAGEUP>   move up=1     pages=True
map <CR>       move right=1
map <DELETE>   console delete
map <INSERT>   console touch 

# VIM-like
copymap <UP>       k
copymap <DOWN>     j
copymap <LEFT>     h
copymap <RIGHT>    l
copymap <HOME>     gg
copymap <END>      G
copymap <PAGEDOWN> <C-F>
copymap <PAGEUP>   <C-B>

map J  move down=0.5  pages=True
map K  move up=0.5    pages=True
copymap J <C-D>
copymap K <C-U>

# Jumping around
map H     history_go -1
map L     history_go 1
map ]     move_parent 1
map [     move_parent -1
map }     traverse

map gh cd ~
map ge cd /etc
map gu cd /usr
map gd cd /dev
map gl cd -r .
map gL cd -r %f
map go cd /opt
map gv cd /var
map gm cd /media
map gM cd /mnt
map gs cd /srv
map gr cd /
map gR eval fm.cd(ranger.RANGERDIR)
map g/ cd /
map g? cd /usr/share/doc/ranger

# External Programs
map E  edit
map du shell -p du --max-depth=1 -h --apparent-size
map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
map yp shell -d echo -n %d/%f | xsel -i
map yd shell -d echo -n %d    | xsel -i
map yn shell -d echo -n %f    | xsel -i

# Filesystem Operations
map =  chmod

map cw console rename 
map A  eval fm.open_console('rename ' + fm.thisfile.basename)
map I  eval fm.open_console('rename ' + fm.thisfile.basename, position=7)

map pp paste
map po paste overwrite=True
map pl paste_symlink relative=False
map pL paste_symlink relative=True
map phl paste_hardlink
map pht paste_hardlinked_subtree

map dd cut
map ud uncut
map da cut mode=add
map dr cut mode=remove

map yy copy
map uy uncut
map ya copy mode=add
map yr copy mode=remove

# Temporary workarounds
map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
map dG  eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
map dj  eval fm.cut(dirarg=dict(down=1), narg=quantifier)
map dk  eval fm.cut(dirarg=dict(up=1), narg=quantifier)
map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
map yG  eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
map yj  eval fm.copy(dirarg=dict(down=1), narg=quantifier)
map yk  eval fm.copy(dirarg=dict(up=1), narg=quantifier)

# Searching
map /  console search 
map n  search_next
map N  search_next forward=False
map ct search_next order=tag
map cs search_next order=size
map ci search_next order=mimetype
map cc search_next order=ctime
map cm search_next order=mtime
map ca search_next order=atime

# Tabs
map <C-n>     tab_new ~
map <C-w>     tab_close
map <TAB>     tab_move 1
map <S-TAB>   tab_move -1
map <A-Right> tab_move 1
map <A-Left>  tab_move -1
map gt        tab_move 1
map gT        tab_move -1
map gn        tab_new ~
map gc        tab_close
map uq        tab_restore
map <a-1>     tab_open 1
map <a-2>     tab_open 2
map <a-3>     tab_open 3
map <a-4>     tab_open 4
map <a-5>     tab_open 5
map <a-6>     tab_open 6
map <a-7>     tab_open 7
map <a-8>     tab_open 8
map <a-9>     tab_open 9

# Sorting
map or toggle_option sort_reverse
map os chain set sort=size;      set sort_reverse=False
map ob chain set sort=basename;  set sort_reverse=False
map on chain set sort=natural;   set sort_reverse=False
map om chain set sort=mtime;     set sort_reverse=False
map oc chain set sort=ctime;     set sort_reverse=False
map oa chain set sort=atime;     set sort_reverse=False
map ot chain set sort=type;      set sort_reverse=False

map oS chain set sort=size;      set sort_reverse=True
map oB chain set sort=basename;  set sort_reverse=True
map oN chain set sort=natural;   set sort_reverse=True
map oM chain set sort=mtime;     set sort_reverse=True
map oC chain set sort=ctime;     set sort_reverse=True
map oA chain set sort=atime;     set sort_reverse=True
map oT chain set sort=type;      set sort_reverse=True

map dc get_cumulative_size

# Settings
map zc    toggle_option collapse_preview
map zd    toggle_option sort_directories_first
map zh    toggle_option show_hidden
map <C-h> toggle_option show_hidden
map zi    toggle_option flushinput
map zm    toggle_option mouse_enabled
map zp    toggle_option preview_files
map zP    toggle_option preview_directories
map zs    toggle_option sort_case_insensitive
map zu    toggle_option autoupdate_cumulative_size
map zv    toggle_option use_preview_script
map zf    console filter 

# Bookmarks
map `<any>  enter_bookmark %any
map '<any>  enter_bookmark %any
map m<any>  set_bookmark %any
map um<any> unset_bookmark %any

map m<bg>   draw_bookmarks
copymap m<bg>  um<bg> `<bg> '<bg>

# Generate all the chmod bindings with some python help:
eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
eval for arg in "rwxXst": cmd("map +{0}  shell -d chmod u+{0} %s".format(arg))

eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
eval for arg in "rwxXst": cmd("map -{0}  shell -d chmod u-{0} %s".format(arg))

# ===================================================================
# == Define keys for the console
# ===================================================================
# Note: Unmapped keys are passed directly to the console.

# Basic
cmap <tab>   eval fm.ui.console.tab()
cmap <s-tab> eval fm.ui.console.tab(-1)
cmap <ESC>   eval fm.ui.console.close()
cmap <CR>    eval fm.ui.console.execute()
cmap <C-l>   redraw_window

copycmap <ESC> <C-c>
copycmap <CR>  <C-j>

# Move around
cmap <up>    eval fm.ui.console.history_move(-1)
cmap <down>  eval fm.ui.console.history_move(1)
cmap <left>  eval fm.ui.console.move(left=1)
cmap <right> eval fm.ui.console.move(right=1)
cmap <home>  eval fm.ui.console.move(right=0, absolute=True)
cmap <end>   eval fm.ui.console.move(right=-1, absolute=True)

# Line Editing
cmap <backspace>  eval fm.ui.console.delete(-1)
cmap <delete>     eval fm.ui.console.delete(0)
cmap <C-w>        eval fm.ui.console.delete_word()
cmap <C-k>        eval fm.ui.console.delete_rest(1)
cmap <C-u>        eval fm.ui.console.delete_rest(-1)
cmap <C-y>        eval fm.ui.console.paste()

# And of course the emacs way
copycmap <up>        <C-p>
copycmap <down>      <C-n>
copycmap <left>      <C-b>
copycmap <right>     <C-f>
copycmap <home>      <C-a>
copycmap <end>       <C-e>
copycmap <delete>    <C-d>
copycmap <backspace> <C-h>

# Note: There are multiple ways to express backspaces.  <backspace> (code 263)
# and <backspace2> (code 127).  To be sure, use both.
copycmap <backspace> <backspace2>

# This special expression allows typing in numerals:
cmap <allow_quantifiers> false

# ===================================================================
# == Pager Keybindings
# ===================================================================

# Movement
pmap  <down>      pager_move  down=1
pmap  <up>        pager_move  up=1
pmap  <left>      pager_move  left=4
pmap  <right>     pager_move  right=4
pmap  <home>      pager_move  to=0
pmap  <end>       pager_move  to=-1
pmap  <pagedown>  pager_move  down=1.0  pages=True
pmap  <pageup>    pager_move  up=1.0    pages=True
pmap  <C-d>       pager_move  down=0.5  pages=True
pmap  <C-u>       pager_move  up=0.5    pages=True

copypmap <UP>       k  <C-p>
copypmap <DOWN>     j  <C-n> <CR>
copypmap <LEFT>     h
copypmap <RIGHT>    l
copypmap <HOME>     g
copypmap <END>      G
copypmap <C-d>      d
copypmap <C-u>      u
copypmap <PAGEDOWN> n  f  <C-F>  <Space>
copypmap <PAGEUP>   p  b  <C-B>

# Basic
pmap     <ESC> pager_close
copypmap <ESC> q Q i <F3>
pmap E      edit_file

# ===================================================================
# == Taskview Keybindings
# ===================================================================

# Movement
tmap <up>        taskview_move up=1
tmap <down>      taskview_move down=1
tmap <home>      taskview_move to=0
tmap <end>       taskview_move to=-1
tmap <pagedown>  taskview_move down=1.0  pages=True
tmap <pageup>    taskview_move up=1.0    pages=True
tmap <C-d>       taskview_move down=0.5  pages=True
tmap <C-u>       taskview_move up=0.5    pages=True

copytmap <UP>       k  <C-p>
copytmap <DOWN>     j  <C-n> <CR>
copytmap <HOME>     g
copytmap <END>      G
copytmap <C-u>      u
copytmap <PAGEDOWN> n  f  <C-F>  <Space>
copytmap <PAGEUP>   p  b  <C-B>

# Changing priority and deleting tasks
tmap J          eval -q fm.ui.taskview.task_move(-1)
tmap K          eval -q fm.ui.taskview.task_move(0)
tmap dd         eval -q fm.ui.taskview.task_remove()
tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
tmap <pageup>   eval -q fm.ui.taskview.task_move(0)
tmap <delete>   eval -q fm.ui.taskview.task_remove()

# Basic
tmap <ESC> taskview_close
copytmap <ESC> q Q w <C-c>
#+end_src

*** scope.sh
:PROPERTIES:
:header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
:END:

#+begin_src sh :tangle no
# ranger supports enhanced previews.  If the option "use_preview_script"
# is set to True and this file exists, this script will be called and its
# output is displayed in ranger.  ANSI color codes are supported.

# NOTES: This script is considered a configuration file.  If you upgrade
# ranger, it will be left untouched. (You must update it yourself.)
# Also, ranger disables STDIN here, so interactive scripts won't work properly

# Meanings of exit codes:
# code | meaning    | action of ranger
# -----+------------+-------------------------------------------
# 0    | success    | success. display stdout as preview
# 1    | no preview | failure. display no preview at all
# 2    | plain text | display the plain content of the file
# 3    | fix width  | success. Don't reload when width changes
# 4    | fix height | success. Don't reload when height changes
# 5    | fix both   | success. Don't ever reload

# Meaningful aliases for arguments:
path="$1"    # Full path of the selected file
width="$2"   # Width of the preview pane (number of fitting characters)
height="$3"  # Height of the preview pane (number of fitting characters)

maxln=200    # Stop after $maxln lines.  Can be used like ls | head -n $maxln

# Find out something about the file:
mimetype=$(file --mime-type -Lb "$path")
extension=${path##*.}

# Functions:
# runs a command and saves its output into $output.  Useful if you need
# the return value AND want to use the output in a pipe
try() { output=$(eval '"$@"'); }

# writes the output of the previouosly used "try" command
dump() { echo "$output"; }

# a common post-processing function used after most commands
trim() { head -n "$maxln"; }

# wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }

case "$extension" in
    # Archive extensions:
    7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
    rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
        try als "$path" && { dump | trim; exit 0; }
        try acat "$path" && { dump | trim; exit 3; }
        try bsdtar -lf "$path" && { dump | trim; exit 0; }
        exit 1;;
    rar)
        try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
    # PDF documents:
    pdf)
        try pdftotext -l 10 -nopgbrk -q "$path" - && \
            { dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
    # BitTorrent Files
    torrent)
        try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
    # HTML Pages:
    htm|html|xhtml)
        try w3m    -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
        try lynx   -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
        try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
        ;; # fall back to highlight/cat if the text browsers fail
esac

case "$mimetype" in
    # Syntax highlight for text files:
    text/* | */xml)
        try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
    # Ascii-previews of images:
    image/*)
        img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
    # Display information about media files:
    video/* | audio/*)
        exiftool "$path" && exit 5
        # Use sed to remove spaces so the output fits into the narrow window
        try mediainfo "$path" && { dump | trim | sed 's/  \+:/: /;';  exit 5; } || exit 1;;
esac

exit 1
#+end_src

** redshift
:PROPERTIES:
:header-args+: :tangle ~/.config/redshift.conf :comments none
:END:

#+begin_src conf
; Global settings for redshift
[redshift]
; Set the day and night screen temperatures (Neutral is 6500K)
;temp-day=5700
;temp-night=3500

;temp-day=6500
temp-day=6200
;temp-night=4800
;temp-night=5000
;temp-night=4500
temp-night=4000

; Enable/Disable a smooth transition between day and night
; 0 will cause a direct change from day to night screen temperature.
; 1 will gradually increase or decrease the screen temperature.
transition=1

; Set the screen brightness. Default is 1.0.
;brightness=0.9
; It is also possible to use different settings for day and night
; since version 1.8.
;brightness-day=0.7
;brightness-night=0.4
; Set the screen gamma (for all colors, or each color channel
; individually)
;gamma=0.8
;gamma=1.0
;gamma=0.8:0.7:0.8
; This can also be set individually for day and night since
; version 1.10.
;gamma-day=0.8:0.7:0.8
;gamma-night=0.6

; Set the location-provider: 'geoclue2' or 'manual'
; type 'redshift -l list' to see possible values.
; The location provider settings are in a different section.
;location-provider=manual
location-provider=geoclue2

; Set the adjustment-method: 'randr', 'vidmode'
; type 'redshift -m list' to see all possible values.
; 'randr' is the preferred method, 'vidmode' is an older API.
; but works in some cases when 'randr' does not.
; The adjustment method settings are in a different section.
adjustment-method=randr

; Configuration of the location-provider:
; type 'redshift -l PROVIDER:help' to see the settings.
; ex: 'redshift -l manual:help'
; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
; are negative numbers.
;[manual]
;lat=48.1
;lon=11.6

; Configuration of the adjustment-method
; type 'redshift -m METHOD:help' to see the settings.
; ex: 'redshift -m randr:help'
; In this example, randr is configured to adjust screen 1.
; Note that the numbering starts from 0, so this is actually the
; second screen. If this option is not specified, Redshift will try
; to adjust _all_ screens.
;[randr]
;screen=1
#+end_src

** rofi
:PROPERTIES:
:header-args+: :tangle ~/.config/rofi/config
:END:

#+begin_src conf
rofi.font: Ubuntu Mono 13
! rofi.font: Inconsolata 16
! rofi.font: Iosevka 13
! rofi.font: Source Code Pro 11
rofi.modi: run,window
! rofi.width: 640
rofi.width: 600
!rofi.location: 2
!rofi.yoffset: 200
rofi.monitor: -1
!rofi.lines: 10

!rofi.theme: /usr/share/rofi/themes//Arc.rasi
!rofi.theme: /usr/share/rofi/themes//Paper.rasi
!rofi.theme: /usr/share/rofi/themes//sidebar.rasi

rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
#+end_src

** rofi-pass
:PROPERTIES:
:header-args+: :tangle ~/.config/rofi-pass/config
:END:

#+begin_src conf
# permanently set alternative root dir
# root=/path/to/root

# rofi command. Make sure to have "$@" as last argument
_rofi () {
    #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
    rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
}

# xdotool needs the keyboard layout to be set using setxkbmap
# You can do this in your autostart scripts (e.g. xinitrc)

# If for some reason, you cannot do this, you can set the command here.
# and set fix_layout to true
fix_layout=false

layout_cmd () {
  setxkbmap us
}

# fields to be used
URL_field='url'
USERNAME_field='user'
AUTOTYPE_field='autotype'

# delay to be used for :delay keyword
delay=2

## Programs to be used
# Editor
EDITOR='gvim -f'

# Browser
BROWSER='chromium'

## Misc settings

default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
auto_enter='false'
notify='false'
default_autotype='user :tab pass'

# color of the help messages
# leave empty for autodetection
help_color="#4872FF"

# Clipboard settings
# Possible options: primary, clipboard, both
clip=primary

# Options for generating new password entries
# default_user is also used for password files that have no user field.
default_user=aminb
default_user2=aminban
password_length=30

# Custom Keybindings
#autotype="Alt+1"
autotype="Alt+m"
type_user="Alt+2"
type_pass="Alt+3"
open_url="Alt+4"
copy_name="Alt+u"
copy_url="Alt+l"
copy_pass="Alt+p"
show="Alt+o"
copy_entry="Alt+2"
type_entry="Alt+1"
copy_menu="Alt+c"
action_menu="Alt+a"
type_menu="Alt+t"
help="Alt+h"
switch="Alt+x"
insert_pass="Alt+n"
#+end_src

** sway
:PROPERTIES:
:header-args+: :tangle ~/.config/sway/config
:END:

#+begin_src conf
exec xrdb .Xresources
exec dunst
### Variables
# super
set $mod Mod4
# alt
set $mod2 Mod1
set $left h
set $down j
set $up k
set $right l
set $term urxvt
set $menu rofi -show run -display-run '> ' -display-window ' 🗔 '

### Output configuration
#
# Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/)
output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
#
# Example configuration:
#
#   output HDMI-A-1 resolution 1920x1080 position 1920,0
#
# You can get the names of your outputs by running: swaymsg -t get_outputs

### Idle configuration
#
# Example configuration:
#
#exec swayidle \
#    timeout 300 'swaylock -c 000000' \
#    timeout 600 'swaymsg "output * dpms off"' \
#       resume 'swaymsg "output * dpms on"' \
#    before-sleep 'swaylock -c 000000'
#
# This will lock your screen after 300 seconds of inactivity, then turn off
# your displays after another 600 seconds, and turn your screens back on when
# resumed. It will also lock your screen before your computer goes to sleep.

### Input configuration

input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
    dwt enabled
    tap enabled
    natural_scroll enabled
    middle_emulation enabled
    click_method clickfinger
}

input "1:1:AT_Translated_Set_2_keyboard" {
    repeat_delay 200
    repeat_rate 45
    xkb_layout us,ir
    xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
}


### Key bindings
#
# Basics:
#
    # start a terminal
    bindsym $mod+Return exec $term

    # kill focused window
    bindsym $mod+Shift+q kill

    # start your launcher
    bindsym $mod+d exec $menu

    # Drag floating windows by holding down $mod and left mouse button.
    # Resize them with right mouse button + $mod.
    floating_modifier $mod

    # reload the configuration file
    bindsym $mod+Shift+c reload

    # exit sway (logs you out of your wayland session)
    bindsym $mod+Shift+e exit

    bindsym $mod+apostrophe exec rofi-light        # rofi-based brightness chooser
    bindsym XF86MonBrightnessUp exec light -A 5    # increase screen brightness
    bindsym XF86MonBrightnessDown exec light -U 5  # decrease screen brightness

    bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
    bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
    bindsym XF86AudioMute exec pamixer --toggle-mute
    bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle

    # original sway workspace switch and window move
    bindsym $mod+bracketleft workspace prev
    bindsym $mod+bracketright workspace next
    bindsym $mod+braceleft move container to workspace prev
    bindsym $mod+braceright move container to workspace next

    # bspwm-esque workspace switch and window move
    bindsym $mod2+bracketleft exec sway-ws-util switch prev
    bindsym $mod2+bracketright exec sway-ws-util switch next
    bindsym $mod2+braceleft exec sway-ws-util move prev follow
    bindsym $mod2+braceright exec sway-ws-util move next follow
#
# Moving around:
#
    # Move your focus around
    bindsym $mod+$left focus left
    bindsym $mod+$down focus down
    bindsym $mod+$up focus up
    bindsym $mod+$right focus right
    # or use $mod+[up|down|left|right]
    bindsym $mod+Left focus left
    bindsym $mod+Down focus down
    bindsym $mod+Up focus up
    bindsym $mod+Right focus right

    # _move_ the focused window with the same, but add Shift
    bindsym $mod+Shift+$left move left
    bindsym $mod+Shift+$down move down
    bindsym $mod+Shift+$up move up
    bindsym $mod+Shift+$right move right
    # ditto, with arrow keys
    bindsym $mod+Shift+Left move left
    bindsym $mod+Shift+Down move down
    bindsym $mod+Shift+Up move up
    bindsym $mod+Shift+Right move right
#
# Workspaces:
#
    # switch to workspace
    bindsym $mod+1 workspace 1
    bindsym $mod+2 workspace 2
    bindsym $mod+3 workspace 3
    bindsym $mod+4 workspace 4
    bindsym $mod+5 workspace 5
    bindsym $mod+6 workspace 6
    bindsym $mod+7 workspace 7
    bindsym $mod+8 workspace 8
    bindsym $mod+9 workspace 9
    bindsym $mod+0 workspace 10
    # move focused container to workspace
    bindsym $mod+Shift+1 move container to workspace 1
    bindsym $mod+Shift+2 move container to workspace 2
    bindsym $mod+Shift+3 move container to workspace 3
    bindsym $mod+Shift+4 move container to workspace 4
    bindsym $mod+Shift+5 move container to workspace 5
    bindsym $mod+Shift+6 move container to workspace 6
    bindsym $mod+Shift+7 move container to workspace 7
    bindsym $mod+Shift+8 move container to workspace 8
    bindsym $mod+Shift+9 move container to workspace 9
    bindsym $mod+Shift+0 move container to workspace 10
    # Note: workspaces can have any name you want, not just numbers.
    # We just use 1-10 as the default.
#
# Layout stuff:
#
    # You can "split" the current object of your focus with
    # $mod+b or $mod+v, for horizontal and vertical splits
    # respectively.
    bindsym $mod+b splith
    bindsym $mod+v splitv

    # Switch the current container between different layout styles
    bindsym $mod+s layout stacking
    bindsym $mod+w layout tabbed
    bindsym $mod+e layout toggle split

    # Make the current focus fullscreen
    bindsym $mod+f fullscreen

    # Toggle the current focus between tiling and floating mode
    bindsym $mod+Shift+space floating toggle

    # Swap focus between the tiling area and the floating area
    bindsym $mod+space focus mode_toggle

    # move focus to the parent container
    bindsym $mod+a focus parent
#
# Scratchpad:
#
    # Sway has a "scratchpad", which is a bag of holding for windows.
    # You can send windows there and get them back later.

    # Move the currently focused window to the scratchpad
    bindsym $mod+Shift+minus move scratchpad

    # Show the next scratchpad window or hide the focused scratchpad window.
    # If there are multiple scratchpad windows, this command cycles through them.
    bindsym $mod+minus scratchpad show
#
# Resizing containers:
#
mode "resize" {
    # left will shrink the containers width
    # right will grow the containers width
    # up will shrink the containers height
    # down will grow the containers height
    bindsym $left resize shrink width 10px
    bindsym $down resize grow height 10px
    bindsym $up resize shrink height 10px
    bindsym $right resize grow width 10px

    # ditto, with arrow keys
    bindsym Left resize shrink width 10px
    bindsym Down resize grow height 10px
    bindsym Up resize shrink height 10px
    bindsym Right resize grow width 10px

    # return to default mode
    bindsym Return mode "default"
    bindsym Escape mode "default"
}
bindsym $mod+Shift+r mode "resize"

#
# Status Bar:
#
# Read `man 5 sway-bar` for more information about this section.
bar {
    position bottom
    colors {
        statusline #ffffff
        background #323232
        inactive_workspace #32323200 #32323200 #5c5c5c
    }
    status_command i3gs ~/.config/i3gs/config
}

include /etc/sway/config.d/*
#+end_src

** TLP

*** TODO enigma
*** plasma

#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/default/tlp")
# ------------------------------------------------------------------------------
# tlp - Parameters for power saving
# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html

# Hint: some features are disabled by default, remove the leading # to enable
# them.

# Set to 0 to disable, 1 to enable TLP.
TLP_ENABLE=1

# Operation mode when no power supply can be detected: AC, BAT.
# Concerns some desktop and embedded hardware only.
TLP_DEFAULT_MODE=AC

# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
TLP_PERSISTENT_DEFAULT=0

# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
# Non-zero value enables, zero disables laptop mode.
DISK_IDLE_SECS_ON_AC=0
DISK_IDLE_SECS_ON_BAT=2

# Dirty page values (timeouts in secs).
MAX_LOST_WORK_SECS_ON_AC=15
MAX_LOST_WORK_SECS_ON_BAT=60

# Hint: CPU parameters below are disabled by default, remove the leading #
# to enable them, otherwise kernel default values are used.

# Select a CPU frequency scaling governor.
# Intel Core i processor with intel_pstate driver:
#   powersave(*), performance.
# Older hardware with acpi-cpufreq driver:
#   ondemand(*), powersave, performance, conservative, schedutil.
# (*) is recommended.
# Hint: use tlp-stat -p to show the active driver and available governors.
# Important:
#   powersave for intel_pstate and ondemand for acpi-cpufreq are power
#   efficient for *almost all* workloads and therefore kernel and most
#   distributions have chosen them as defaults. If you still want to change,
#   you should know what you're doing! You *must* disable your distribution's
#   governor settings or conflicts will occur.
#CPU_SCALING_GOVERNOR_ON_AC=powersave
#CPU_SCALING_GOVERNOR_ON_BAT=powersave

# Set the min/max frequency available for the scaling governor.
# Possible values strongly depend on your CPU. For available frequencies see
# the output of tlp-stat -p.
#CPU_SCALING_MIN_FREQ_ON_AC=0
#CPU_SCALING_MAX_FREQ_ON_AC=0
#CPU_SCALING_MIN_FREQ_ON_BAT=0
#CPU_SCALING_MAX_FREQ_ON_BAT=0

# Set energy performance hints (HWP) for Intel P-state governor:
#   performance, balance_performance, default, balance_power, power
# Values are given in order of increasing power saving.
# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
CPU_HWP_ON_AC=balance_performance
CPU_HWP_ON_BAT=balance_power

# Set Intel P-state performance: 0..100 (%).
# Limit the max/min P-state to control the power dissipation of the CPU.
# Values are stated as a percentage of the available performance.
# Requires an Intel Core i processor with intel_pstate driver.
#CPU_MIN_PERF_ON_AC=0
#CPU_MAX_PERF_ON_AC=100
#CPU_MIN_PERF_ON_BAT=0
#CPU_MAX_PERF_ON_BAT=30

# Set the CPU "turbo boost" feature: 0=disable, 1=allow
# Requires an Intel Core i processor.
# Important:
# - This may conflict with your distribution's governor settings
# - A value of 1 does *not* activate boosting, it just allows it
#CPU_BOOST_ON_AC=1
#CPU_BOOST_ON_BAT=0

# Minimize number of used CPU cores/hyper-threads under light load conditions:
#   0=disable, 1=enable.
SCHED_POWERSAVE_ON_AC=0
SCHED_POWERSAVE_ON_BAT=1

# Kernel NMI Watchdog:
#   0=disable (default, saves power), 1=enable (for kernel debugging only).
NMI_WATCHDOG=0

# Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
# Frequency voltage pairs are written to:
#   /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
# CAUTION: only use this, if you thoroughly understand what you are doing!
#PHC_CONTROLS="F:V F:V F:V F:V"

# Set CPU performance versus energy savings policy:
#   performance, balance-performance, default, balance-power, power.
# Values are given in order of increasing power saving.
# Requires kernel module msr and x86_energy_perf_policy from linux-tools.
ENERGY_PERF_POLICY_ON_AC=performance
ENERGY_PERF_POLICY_ON_BAT=balance-power

# Disk devices; separate multiple devices with spaces (default: sda).
# Devices can be specified by disk ID also (lookup with: tlp diskid).
DISK_DEVICES="sda sdb"

# Disk advanced power management level: 1..254, 255 (max saving, min, off).
# Levels 1..127 may spin down the disk; 255 allowable on most drives.
# Separate values for multiple disks with spaces. Use the special value 'keep'
# to keep the hardware default for the particular disk.
DISK_APM_LEVEL_ON_AC="254 254"
DISK_APM_LEVEL_ON_BAT="128 128"

# Hard disk spin down timeout:
#   0:        spin down disabled
#   1..240:   timeouts from 5s to 20min (in units of 5s)
#   241..251: timeouts from 30min to 5.5 hours (in units of 30min)
# See 'man hdparm' for details.
# Separate values for multiple disks with spaces. Use the special value 'keep'
# to keep the hardware default for the particular disk.
#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"

# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
# Separate values for multiple disks with spaces. Use the special value 'keep'
# to keep the kernel default scheduler for the particular disk.
#DISK_IOSCHED="cfq cfq"

# AHCI link power management (ALPM) for disk devices:
#   min_power, med_power_with_dipm(*), medium_power, max_performance.
# (*) Kernel >= 4.15 required, then recommended.
# Multiple values separated with spaces are tried sequentially until success.
SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"

# Exclude host devices from AHCI link power management.
# Separate multiple hosts with spaces.
#SATA_LINKPWR_BLACKLIST="host1"

# Runtime Power Management for AHCI host and disks devices:
#   on=disable, auto=enable.
# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
#AHCI_RUNTIME_PM_ON_AC=on
#AHCI_RUNTIME_PM_ON_BAT=on

# Seconds of inactivity before disk is suspended.
AHCI_RUNTIME_PM_TIMEOUT=15

# PCI Express Active State Power Management (PCIe ASPM):
#   default, performance, powersave.
PCIE_ASPM_ON_AC=performance
PCIE_ASPM_ON_BAT=powersave

# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
# auto = mid on BAT, high on AC; default = use hardware defaults.
RADEON_POWER_PROFILE_ON_AC=high
RADEON_POWER_PROFILE_ON_BAT=low

# Radeon dynamic power management method (DPM): battery, performance.
RADEON_DPM_STATE_ON_AC=performance
RADEON_DPM_STATE_ON_BAT=battery

# Radeon DPM performance level: auto, low, high; auto is recommended.
RADEON_DPM_PERF_LEVEL_ON_AC=auto
RADEON_DPM_PERF_LEVEL_ON_BAT=auto

# WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
WIFI_PWR_ON_AC=off
WIFI_PWR_ON_BAT=on

# Disable wake on LAN: Y/N.
WOL_DISABLE=Y

# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
# A value of 0 disables, >=1 enables power saving (recommended: 1).
SOUND_POWER_SAVE_ON_AC=0
SOUND_POWER_SAVE_ON_BAT=0

# Disable controller too (HDA only): Y/N.
SOUND_POWER_SAVE_CONTROLLER=N

# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
# Drive can be powered on again by releasing (and reinserting) the eject lever
# or by pressing the disc eject button on newer models.
# Note: an UltraBay/MediaBay hard disk is never powered off.
BAY_POWEROFF_ON_AC=0
BAY_POWEROFF_ON_BAT=0
# Optical drive device to power off (default sr0).
BAY_DEVICE="sr0"

# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
RUNTIME_PM_ON_AC=on
RUNTIME_PM_ON_BAT=auto

# Exclude PCI(e) device adresses the following list from Runtime PM
# (separate with spaces). Use lspci to get the adresses (1st column).
#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
RUNTIME_PM_BLACKLIST="01:00.0"

# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
# Default when unconfigured is "amdgpu nouveau nvidia radeon" which
# prevents accidential power-on of dGPU in hybrid graphics setups.
# Use "" to disable the feature completely.
# Separate multiple drivers with spaces.
#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"

# Set to 0 to disable, 1 to enable USB autosuspend feature.
USB_AUTOSUSPEND=1

# Exclude listed devices from USB autosuspend (separate with spaces).
# Use lsusb to get the ids.
# Note: input devices (usbhid) are excluded automatically
#USB_BLACKLIST="1111:2222 3333:4444"

# Bluetooth devices are excluded from USB autosuspend:
#   0=do not exclude, 1=exclude.
USB_BLACKLIST_BTUSB=0

# Phone devices are excluded from USB autosuspend:
#   0=do not exclude, 1=exclude (enable charging).
USB_BLACKLIST_PHONE=0

# Printers are excluded from USB autosuspend:
#   0=do not exclude, 1=exclude.
USB_BLACKLIST_PRINTER=1

# WWAN devices are excluded from USB autosuspend:
#   0=do not exclude, 1=exclude.
USB_BLACKLIST_WWAN=1

# Include listed devices into USB autosuspend even if already excluded
# by the blacklists above (separate with spaces).
# Use lsusb to get the ids.
#USB_WHITELIST="1111:2222 3333:4444"

# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
# (workaround for USB devices that cause shutdown problems).
#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1

# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
# on system startup: 0=disable, 1=enable.
# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
#   are ignored when this is enabled!
#RESTORE_DEVICE_STATE_ON_STARTUP=0
RESTORE_DEVICE_STATE_ON_STARTUP=1

# Radio devices to disable on startup: bluetooth, wifi, wwan.
# Separate multiple devices with spaces.
#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"

# Radio devices to enable on startup: bluetooth, wifi, wwan.
# Separate multiple devices with spaces.
#DEVICES_TO_ENABLE_ON_STARTUP="wifi"

# Radio devices to disable on shutdown: bluetooth, wifi, wwan.
# (workaround for devices that are blocking shutdown).
#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"

# Radio devices to enable on shutdown: bluetooth, wifi, wwan.
# (to prevent other operating systems from missing radios).
#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"

# Radio devices to enable on AC: bluetooth, wifi, wwan.
#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"

# Radio devices to disable on battery: bluetooth, wifi, wwan.
#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"

# Radio devices to disable on battery when not in use (not connected):
#   bluetooth, wifi, wwan.
#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"

# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
# required). Charging starts when the remaining capacity falls below the
# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
# Main / Internal battery (values in %)
#START_CHARGE_THRESH_BAT0=75
#STOP_CHARGE_THRESH_BAT0=80
# Ultrabay / Slice / Replaceable battery (values in %)
#START_CHARGE_THRESH_BAT1=75
#STOP_CHARGE_THRESH_BAT1=80

# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
#RESTORE_THRESHOLDS_ON_BAT=1

# ------------------------------------------------------------------------------
# tlp-rdw - Parameters for the radio device wizard
# Possible devices: bluetooth, wifi, wwan.

# Hints:
# - Parameters are disabled by default, remove the leading # to enable them
# - Separate multiple radio devices with spaces

# Radio devices to disable on connect.
#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"

# Radio devices to enable on disconnect.
#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""

# Radio devices to enable/disable when docked.
#DEVICES_TO_ENABLE_ON_DOCK=""
#DEVICES_TO_DISABLE_ON_DOCK=""

# Radio devices to enable/disable when undocked.
#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
#DEVICES_TO_DISABLE_ON_UNDOCK=""
#+end_src

** X

*** xprofile
:PROPERTIES:
:header-args+: :tangle ~/.xprofile
:END:

=~/.xprofile= is similar in style to =~/.xinitrc=, but on the
contrary, it's automatically sourced by LightDM, my display manager of
choice.

#+begin_src sh :tangle no
xset -b  # disable bell
xset r rate 200 45  # repeat delay (ms) and rate (repeats/sec)

# setxkbmap -option compose:ralt

setxkbmap -option ctrl:nocaps          # turn capslock into control
setxkbmap -option altwin:swap_alt_win  # swap alt and super

if [ $(hostname) = "plasma" ]
then
    setxkbmap -option ctrl:rctrl_ralt  # turn right control into right alt
fi

if [ $(hostname) = "enigma" ]
then
    xmodmap -e "keycode 135 = Alt_R"  # remap menu key to alt
fi

light -Scrs "intel_backlight" 2

source $HOME/.zprofile

export _JAVA_AWT_WM_NONREPARENTING=1
export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'

if [ $(hostname) = "plasma" ]
then
    unlock-def-gk.py &
fi

bspwm &
#+end_src

*** X resources

**** Xresources
:PROPERTIES:
:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
:END:

#+begin_src conf-xdefaults
#include ".Xresources.d/fonts"
! #include ".Xresources.d/colors"
#include ".Xresources.d/emacs"
#include ".Xresources.d/rxvt-unicode"
#+end_src

**** Xresources.d

***** fonts
:PROPERTIES:
:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
:END:

#+begin_src conf-xdefaults
Xft.lcdfilter: lcddefault
Xft.antialias: true
Xft.autohint: 0
Xft.hinting: true
Xft.hintstyle: hintslight
! Xft.hintstyle: hintfull
Xft.rgba: rgb
Xft.dpi: 96
#+end_src

***** colors
:PROPERTIES:
:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
:END:

#+begin_src conf-xdefaults :tangle no
#include "gruvbox-light.xresources"
! #include "gruvbox-dark.xresources"
#include "gruvbox-urxvt256.xresources"
#+end_src

#+begin_src conf-xdefaults :tangle no
! -----------------------------------------------------------------------------
! File: gruvbox-light.xresources
! Description: Retro groove colorscheme generalized
! Author: morhetz <morhetz@gmail.com>
! Source: https://github.com/morhetz/gruvbox-generalized
! Last Modified: 6 Sep 2014
! -----------------------------------------------------------------------------

! hard contrast: *background: #f9f5d7
*background: #fbf1c7
! soft contrast: *background: #f2e5bc
*foreground: #3c3836
! Black + DarkGrey
*color0:  #fdf4c1
*color8:  #928374
! DarkRed + Red
*color1:  #cc241d
*color9:  #9d0006
! DarkGreen + Green
*color2:  #98971a
*color10: #79740e
! DarkYellow + Yellow
*color3:  #d79921
*color11: #b57614
! DarkBlue + Blue
*color4:  #458588
*color12: #076678
! DarkMagenta + Magenta
*color5:  #b16286
*color13: #8f3f71
! DarkCyan + Cyan
*color6:  #689d6a
*color14: #427b58
! LightGrey + White
*color7:  #7c6f64
*color15: #3c3836
#+end_src

#+begin_src conf-xdefaults :tangle no
! -----------------------------------------------------------------------------
! File: gruvbox-dark.xresources
! Description: Retro groove colorscheme generalized
! Author: morhetz <morhetz@gmail.com>
! Source: https://github.com/morhetz/gruvbox-generalized
! Last Modified: 6 Sep 2014
! -----------------------------------------------------------------------------

! hard contrast: *background: #1d2021
*background: #282828
! soft contrast: *background: #32302f
*foreground: #ebdbb2
! Black + DarkGrey
*color0:  #282828
*color8:  #928374
! DarkRed + Red
*color1:  #cc241d
*color9:  #fb4934
! DarkGreen + Green
*color2:  #98971a
*color10: #b8bb26
! DarkYellow + Yellow
*color3:  #d79921
*color11: #fabd2f
! DarkBlue + Blue
*color4:  #458588
*color12: #83a598
! DarkMagenta + Magenta
*color5:  #b16286
*color13: #d3869b
! DarkCyan + Cyan
*color6:  #689d6a
*color14: #8ec07c
! LightGrey + White
*color7:  #a89984
*color15: #ebdbb2
#+end_src

#+begin_src conf-xdefaults :tangle no
! -----------------------------------------------------------------------------
! File: gruvbox-urxvt256.xresources
! Description: Retro groove colorscheme generalized
! Author: morhetz <morhetz@gmail.com>
! Source: https://github.com/morhetz/gruvbox-generalized
! Last Modified: 13 Dec 2013
! -----------------------------------------------------------------------------

URxvt.color24:  #076678
URxvt.color66:  #427b58
URxvt.color88:  #9d0006
URxvt.color96:  #8f3f71
URxvt.color100: #79740e
URxvt.color108: #8ec07c
URxvt.color109: #83a598
URxvt.color130: #af3a03
URxvt.color136: #b57614
URxvt.color142: #b8bb26
URxvt.color167: #fb4934
URxvt.color175: #d3869b
URxvt.color208: #fe8019
URxvt.color214: #fabd2f
URxvt.color223: #ebdbb2
URxvt.color228: #f2e5bc
URxvt.color229: #fbf1c7
URxvt.color230: #f9f5d7
URxvt.color234: #1d2021
URxvt.color235: #282828
URxvt.color236: #32302f
URxvt.color237: #3c3836
URxvt.color239: #504945
URxvt.color241: #665c54
URxvt.color243: #7c6f64
URxvt.color244: #928374
URxvt.color245: #928374
URxvt.color246: #a89984
URxvt.color248: #bdae93
URxvt.color250: #d5c4a1
#+end_src

***** emacs
:PROPERTIES:
:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
:END:

#+begin_src conf-xdefaults
Emacs.menuBar: off
Emacs.toolBar: off
Emacs.verticalScrollBars: off
Emacs.cursorBlink: off
Emacs.FontBackend: xft,x
! Emacs.font: Ubuntu Mono-12
! Emacs.font: Triplicate T4C-11
! Emacs.font: Ubuntu Mono-10.5
! Emacs.font: Ubuntu Mono-12
! Emacs.font: Iosevka-11

! Emacs.font: Fira Mono:size=15
! Emacs.font: DejaVu Sans Mono:size=15
! Emacs.font: Inconsolata:size=17
! Emacs.font: Inconsolata:size=16
! Emacs.font: Inconsolata LGC:size=14
! Emacs.font: Source Code Pro Medium-10.5
Emacs.font: Ubuntu Mono:size=16
! Emacs.font: Iosevka:size=16
#+end_src

***** rxvt-unicode
:PROPERTIES:
:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
:END:

#+begin_src conf-xdefaults
! Font
URxvt.font:             xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
URxvt.boldFont:         xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
URxvt.italicFont:       xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
URxvt.bolditalicFont:   xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic

URxvt.xftAntialias:     true
URxvt.letterSpace:      0

URxvt.depth:                0
URxvt.loginShell:           true
URxvt.saveLines:            100000
URxvt.internalBorder:       3
URxvt.lineSpace:            0
URxvt.scrollBar:            false
URxvt.scrollStyle:          rxvt
URxvt*scrollTtyOutput:      false
URxvt*scrollWithBuffer:     true
URxvt*scrollTtyKeypress:    true
URxvt.keysym.Shift-Up:      command:\033]720;1\007
URxvt.keysym.Shift-Down:    command:\033]721;1\007

URxvt.perl-ext-common:      default,clipboard,url-select,keyboard-select
URxvt.perl-ext:             bidi
URxvt.bidi.enabled:         1
URxvt.url-select.launcher:  firefox
URxvt.url-select.underline: true
URxvt.keysym.M-u:           perl:url-select:select_next
URxvt.keysym.M-Escape:      perl:keyboard-select:activate
URxvt.keysym.M-s:           perl:keyboard-select:search
URxvt.url-launcher:         /usr/bin/firefox
URxvt.matcher.button:       1
URxvt.iso14755:             false
URxvt.iso14755_53:          false
URxvt.keysym.M-c:           perl:clipboard:copy
URxvt.keysym.M-v:           perl:clipboard:paste
URxvt.keysym.C-A-V:         perl:clipboard:paste_escaped
URxvt.keysym.C-Up:          font-size:increase
URxvt.keysym.C-Down:        font-size:decrease
URxvt.keysym.C-S-Up:        font-size:incglobal
URxvt.keysym.C-S-Down:      font-size:decglobal
URxvt.keysym.C-equal:       font-size:reset
!URxvt.keysym.C-question:   font-size:show

URxvt.iconFile:             /usr/share/icons/Paper/48x48/apps/utilities-terminal.png

!urxvt*foreground: white
!urxvt*background: black

!*color0:  #2E3436
!*color1:  #a40000
!*color2:  #4E9A06
!*color3:  #C4A000
!*color4:  #3465A4
!*color5:  #75507B
!*color6:  #ce5c00
!*color7:  #babdb9
!*color8:  #555753
!*color9:  #EF2929
!*color10: #8AE234
!*color11: #FCE94F
!*color12: #729FCF
!*color13: #AD7FA8
!*color14: #fcaf3e
!*color15: #EEEEEC

!URxvt.foreground: #C8C8C8
!URxvt.background: #FFFFFF

!! black
!*color0:  #2E3436
!*color8:  #555753
!! red
!*color1:  #a40000
!*color9:  #EF2929
!! green
!*color2:  #4E9A06
!*color10: #8AE234
!! yellow
!*color3:  #C4A000
!*color11: #FCE94F
!! blue
!*color4:  #3465A4
!*color12: #729FCF
!! purple
!*color5:  #75507B
!*color13: #AD7FA8
!! orange (replaces cyan)
!*color6:  #ce5c00
!*color14: #fcaf3e
!! white
!*color7:  #babdb9
!*color15: #EEEEEC

! Tango colour theme for rxvt-unicode
URxvt.background: #FFFFFF
URxvt.foreground: #000000

! Black
URxvt.color0: #2E3436
URxvt.color8: #757773

! Red
URxvt.color1: #CC0000
URxvt.color9: #EF2929

! Green
URxvt.color2: #4E9A06
URxvt.color10: #8AE234

! Yellow
URxvt.color3: #C4A000
URxvt.color11: #FCE94F

! Blue
URxvt.color4: #3465A4
URxvt.color12: #729FCF

! Magenta
URxvt.color5: #75507B
URxvt.color13: #AD7FA8

!! Cyan
!URxvt.color6: #06989A
!URxvt.color14: #34E2E2
! orange (replaces cyan)
*color6:  #ce5c00
*color14: #fcaf3e

! White
URxvt.color7: #D3D7CF
URxvt.color15: #EEEEEC
#+end_src

** XDG
:PROPERTIES:
:header-args+: :tangle ~/.config/user-dirs.dirs
:END:

#+begin_src conf
XDG_DESKTOP_DIR="$HOME/Desktop"
XDG_DOCUMENTS_DIR="$HOME/usr/docs"
XDG_DOWNLOAD_DIR="$HOME/usr/dls"
XDG_MUSIC_DIR="$HOME/usr/music"
XDG_PICTURES_DIR="$HOME/usr/pics"
XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
XDG_TEMPLATES_DIR="$HOME/usr/Templates"
XDG_VIDEOS_DIR="$HOME/usr/vids"
#+end_src

** Zathura
:PROPERTIES:
:header-args+: :tangle ~/.config/zathura/zathurarc
:END:

#+begin_src conf
set smooth-scroll true
set selection-clipboard clipboard
set zoom-step 05
set default-bg "#272727"
set statusbar-bg "#272727"
set inputbar-bg "#373737"
#+end_src

** Zsh

My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
[[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
installed.

*** zimrc
:PROPERTIES:
:header-args+: :tangle ~/.zimrc
:END:

#+begin_src sh


#################
# CORE SETTINGS #
#################

#
# Zim settings
#

# Select what modules you would like enabled.
# The second line of modules may depend on options set by modules in the first
# line. These dependencies are noted on the respective module's README.md.
zmodules=(directory environment git git-info history input ssh utility custom \
          syntax-highlighting history-substring-search prompt completion)


###################
# MODULE SETTINGS #
###################

#
# Prompt
#

# Set your desired prompt here
zprompt_theme='pure'
#PURE_PROMPT_SYMBOL=λ
#PURE_PROMPT_SYMBOL=δ
PURE_PROMPT_SYMBOL=➜

#
# Completion
#

# set an optional host-specific filename for the completion cache file
# if none is provided, the default '.zcompdump' is used.
#zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"

#
# Utility
#

# Uncomment to enable command correction prompts
# See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
setopt CORRECT

#
# Environment
#

# Set the string below to the desired terminal title format string.
# The terminal title is redrawn upon directory change, however, variables like 
# ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
#   http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
# The example below uses the following format: 'username@host:/current/directory'
ztermtitle='%n@%m:%~'

#
# Input
#

# Uncomment to enable double-dot expansion.
# This appends '../' to your input for each '.' you type after an initial '..'
#zdouble_dot_expand='true'

#
# Syntax-Highlighting
#

# This determines what highlighters will be used with the syntax-highlighting module.
# Documentation of the highlighters can be found here:
#   https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
# For (u)rxvt, termite and gnome-terminal users,
# removing the 'cursor' highlighter will fix the disappearing cursor problem
#zhighlighters=(main brackets cursor)
zhighlighters=(main brackets pattern)


#
# SSH
#

# Load these ssh identities with the ssh module
zssh_ids=(id_rsa plasma_id_rsa id_ed25519 id_rsa_aur)


#
# Pacman
#

# Set (optional) pacman front-end.
zpacman_frontend='yay'

# Load any helper scripts as defined here
#zpacman_helper=(aur)
#+end_src

*** zlogin
:PROPERTIES:
:header-args+: :tangle ~/.zlogin
:END:

#+begin_src sh


#
# User configuration sourced by login shells
#

# Initialize zim
[[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
#+end_src

*** zprofile
:PROPERTIES:
:header-args+: :tangle ~/.zprofile
:END:

#+begin_src sh
#PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
#PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
export XDG_CONFIG_HOME=$HOME/.config
export XDG_DATA_HOME=$HOME/.local/share
export XDG_DATA_DIRS=/usr/local/share:/usr/share
export MAILDIR="$HOME/mail"
export CVS_RSH=ssh
#export MATHMODELS=$HOME/src/eiffel/mathmodels
#export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
#export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/

# Eiffel2Java stuff
#export JAVA_HOME=/usr/lib/jvm/default
#export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
#export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
#export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"

#export PATH="$HOME/usr/build/pvs:$PATH"
#export SBCLISP_HOME=/usr/share/sbcl-source
#export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"

export MOZ_USE_XINPUT2=1  # precise scrolling in firefox

#export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
#export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"

if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
#+end_src

*** zshenv
:PROPERTIES:
:header-args+: :tangle ~/.zshenv
:END:

#+begin_src sh
# Ensure that a non-login, non-interactive shell has a defined environment.
if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
  source "${ZDOTDIR:-$HOME}/.zprofile"
fi
#+end_src

*** zshrc
:PROPERTIES:
:header-args+: :tangle ~/.zshrc
:END:

#+begin_src sh
# Bash-like navigation
#export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
#export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
export WORDCHARS='*?[]~=&;!#$%^(){}<>'
#ZLE_SPACE_SUFFIX_CHARS=$'|&'

#disable -r time       # disable shell reserved word
#alias time='time -p'  # -p for POSIX output

# rehash if last command was pacaur or pacman
# (so that zsh picks up changes in $PATH immediately)
TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }

#
# User configuration sourced by interactive shells
#

# Change default zim location
export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim

# Start zim
[[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh

ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
#ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold' 

setopt globdots

source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
source ~/.zsh/zsh-autopair/autopair.zsh


### fzf ###

source /usr/share/fzf/key-bindings.zsh
source /usr/share/fzf/completion.zsh

# Accept history selection instead of putting it on
# the command line
fzf-history-widget-accept() {
  fzf-history-widget
  zle accept-line
}
#zle     -N   fzf-history-widget-accept
#bindkey '^R' fzf-history-widget-accept

# alt+c preview
export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"

### fzf ###


# aliases
alias mpv="mpv --ytdl-format mp4"
alias mv="mv -iv"
alias cp="cp -iv"
alias scl=systemctl
alias jcl=journalctl
alias m="mbsync -Va; getmail; notmuch new"
alias best="youtube-dl -f best"
alias nixx="ssh amin@nix.aminb.org"
alias fence="ssh aminb@fencepost.gnu.org"

aur() {
   cd ~/usr/build
   git clone https://aur.archlinux.org/${1}.git
   cd ${1}
}

# i-beam cursor
echo -e "\033[5 q"
#echo -e "\033[6 q"
#+end_src

* Scripts

This section contains various useful scripts and the ones used by the
programs above. For instance, =toggle-tablet= for switching to and
from tablet mode on my X220T, =toggle-presentation-mode= for toggling
Xfce's presentation mode which keeps the screen awake, and
=rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
exact brightness value.

** battery-percentage-time
:PROPERTIES:
:header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/bash"
:END:

#+begin_src bash
perc=$(dbus-send --print-reply=literal --system \
        --dest=org.freedesktop.UPower \
        /org/freedesktop/UPower/devices/battery_BAT0 \
        org.freedesktop.DBus.Properties.Get \
        string:org.freedesktop.UPower.Device \
        string:'Percentage' | awk '{print $3}')

state=$(dbus-send --print-reply=literal --system \
        --dest=org.freedesktop.UPower \
        /org/freedesktop/UPower/devices/battery_BAT0 \
        org.freedesktop.DBus.Properties.Get \
        string:org.freedesktop.UPower.Device \
        string:'State' | awk '{print $3}')

if [ "$state" -eq 2 ]; then  # Discharging
  secs=$(dbus-send --print-reply=literal --system \
            --dest=org.freedesktop.UPower \
            /org/freedesktop/UPower/devices/battery_BAT0 \
            org.freedesktop.DBus.Properties.Get \
            string:org.freedesktop.UPower.Device \
            string:'TimeToEmpty' | awk '{print $3}')
  printf '%s%%%%%2dh%02dm\n' "$perc" $((secs/3600)) $((secs%3600/60))
elif [ "$state" -eq 1 ]; then  # Charging
  secs=$(dbus-send --print-reply=literal --system \
            --dest=org.freedesktop.UPower \
            /org/freedesktop/UPower/devices/battery_BAT0 \
            org.freedesktop.DBus.Properties.Get \
            string:org.freedesktop.UPower.Device \
            string:'TimeToFull' | awk '{print $3}')
  printf '%s%%%%%2dh%02dm\n' "$perc" $((secs/3600)) $((secs%3600/60))
fi
#+end_src

** rofi-light
:PROPERTIES:
:header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
:END:

#+begin_src bash
cur=$(light -G)
val=$(rofi -dmenu -mesg "light    $cur" -p "light -S " -l 0 -width 12)
light -S $val
#+end_src

** s (run sway)
:PROPERTIES:
:header-args+: :tangle ~/.local/bin/s :shebang "#!/bin/bash"
:END:

#+begin_src bash
export _JAVA_AWT_WM_NONREPARENTING=1
export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
light -Scrs "intel_backlight" 2
source $HOME/.zprofile
sway
#+end_src

** sway-ws-util
:PROPERTIES:
:header-args+: :tangle ~/.local/bin/sway-ws-util :shebang "#!/bin/bash"
:END:

#+begin_src bash
curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name')
[[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1))
[[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1))
dest_ws=-1
op=-1

if [ "$1" = "switch" ] || [ "$1" = "move" ]; then
  op="$1"
  if [ "$2" = "prev" ]; then
    dest_ws="$prev_ws"
  elif [ "$2" = "next" ]; then
    dest_ws="$next_ws"
  else
    echo "Usage: $0 $1 {prev|next} [follow]"
    exit 1
  fi
else
  echo "Usage: $0 {switch|move} {prev|next} [follow]"
  exit 1
fi

if [ "$op" = "switch" ]; then
  sway workspace "$dest_ws"
elif [ "$op" = "move" ]; then
  sway move container to workspace "$dest_ws"
  if [ "$3" = "follow" ]; then
    sway workspace "$dest_ws"
  fi
fi
#+end_src

** toggle-layout
:PROPERTIES:
:header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
:END:

#+begin_src bash
lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"

if [ "$lang" = "us" ]; then
    setxkbmap ir
else
    setxkbmap us
    # xmodmap $HOME/.Xmodmap
fi
#+end_src

** toggle-presentation-mode
:PROPERTIES:
:header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
:END:

#+begin_src bash
xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
#+end_src

** toggle-tablet
:PROPERTIES:
:header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
:END:

This script toggles between a 'normal' mode and a 'tablet' mode, doing
a few things:

- rotates the screen using =xrandr=, so that rotating the physical
  display of my X220t would have the laptop's battery on the right
  hand side,
- enables touch screen,
- properly rotates the stylus pen and touch screen pointers, and
- toggles between RGB and Vertical BGR sub-pixel order.

#+begin_src bash
case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
    0)  # Screen is not rotated, we should rotate it right (90°)
           xrandr -o 3
           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
           xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
           ;;
    1)  # Currently top is rotated right, we should set it normal (0°)
          xrandr -o 0
          xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
          xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
          xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
          xfconf-query -c xsettings -p /Xft/RGBA -s rgb
          ;;
    *)
           echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
           exit 1
           ;;
esac
#+end_src

** unlock-def-gk.py
:PROPERTIES:
:header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
:END:

#+begin_src python
import gnomekeyring as gk
# list_item_ids_sync('login')[0] == 1L
gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
#+end_src

** wp

My little wallpaper changer script.

*** wp
:PROPERTIES:
:header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
:END:

#+begin_src bash :tangle no
export DISPLAY=:0

case "$1" in
  "day")
    feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
    ;;
  "night")
    feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
    ;;
  *)
    echo $"Usage: $0 {day|night}"
    exit 1
esac
#+end_src

*** wp-auto
:PROPERTIES:
:header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
:END:

#+begin_src bash :tangle no
SED=$(which sed)
ROFI=$(which rofi)

export DISPLAY=:0
HOUR=$(date +%H)

if [ -z "${SED}" ]
then
    echo "Did not find 'sed', script cannot continue."
    exit 1
fi
if [ -z "${ROFI}" ]
then
    echo "Did not find rofi, there is no point to continue."
    exit 1
fi

###
# Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
# Repeated calls should leave the config clean-ish
###
function set_theme()
{
    CDIR="${HOME}/.config/rofi/"
    if [ ! -d "${CDIR}" ]
    then
        mkdir -p ${CDIR}
    fi
    if [ -f "${CDIR}/config" ]
    then
        ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
    fi
    echo "rofi.theme: ${1}" >> "${CDIR}/config"

}

if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
    then
        feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
        xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
        set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
    else
        feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
        xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
        set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
fi
#+end_src

*** wp.service
:PROPERTIES:
:header-args+: :tangle ~/.config/systemd/user/wp.service
:END:

#+begin_src conf :tangle no
[Unit]
Description=wallpaper service

[Service]
Type=oneshot
ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
#+end_src

*** wp.timer
:PROPERTIES:
:header-args+: :tangle ~/.config/systemd/user/wp.timer
:END:

#+begin_src conf :tangle no
[Unit]
[Unit]
Description=wallpaper timer

[Timer]
OnCalendar=07,21:00
Unit=wp.service
Persistent=true

[Install]
WantedBy=timers.target
#+end_src

** zathura-sync.sh
:PROPERTIES:
:header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
:END:

#+begin_src sh
pos="$1"
pdffile="$2"
zathura --synctex-forward "$pos" "$pdffile" || \
    (
    zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
    sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
#+end_src
** Fun :)

*** eat-em
:PROPERTIES:
:header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
:END:

#+begin_src sh
# Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
# [ESC] character in original post removed here.

# ANSI Color -- use these variables to easily have different color
#    and format output. Make sure to output the reset sequence after
#    colors (f = foreground, b = background), and use the 'off'
#    feature for anything you turn on.

initializeANSI()
{
 esc="$(echo -en '\e')"

  blackf="${esc}[30m";   redf="${esc}[31m";    greenf="${esc}[32m"
  yellowf="${esc}[33m"   bluef="${esc}[34m";   purplef="${esc}[35m"
  cyanf="${esc}[36m";    whitef="${esc}[37m"

  blackb="${esc}[40m";   redb="${esc}[41m";    greenb="${esc}[42m"
  yellowb="${esc}[43m"   blueb="${esc}[44m";   purpleb="${esc}[45m"
  cyanb="${esc}[46m";    whiteb="${esc}[47m"

  boldon="${esc}[1m";    boldoff="${esc}[22m"
  italicson="${esc}[3m"; italicsoff="${esc}[23m"
  ulon="${esc}[4m";      uloff="${esc}[24m"
  invon="${esc}[7m";     invoff="${esc}[27m"

  reset="${esc}[0m"
}

# note in this first use that switching colors doesn't require a reset
# first - the new color overrides the old one.

#clear

initializeANSI

cat << EOF

 ${yellowf}  ▄███████▄${reset}   ${redf}  ▄██████▄${reset}    ${greenf}  ▄██████▄${reset}    ${bluef}  ▄██████▄${reset}    ${purplef}  ▄██████▄${reset}    ${cyanf}  ▄██████▄${reset}
 ${yellowf}▄█████████▀▀${reset}  ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset}  ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset}  ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset}  ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset}  ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
 ${yellowf}███████▀${reset}      ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset}  ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset}  ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset}  ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset}  ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
 ${yellowf}███████▄${reset}      ${redf}████████████${reset}  ${greenf}████████████${reset}  ${bluef}████████████${reset}  ${purplef}████████████${reset}  ${cyanf}████████████${reset}
 ${yellowf}▀█████████▄▄${reset}  ${redf}██▀██▀▀██▀██${reset}  ${greenf}██▀██▀▀██▀██${reset}  ${bluef}██▀██▀▀██▀██${reset}  ${purplef}██▀██▀▀██▀██${reset}  ${cyanf}██▀██▀▀██▀██${reset}
 ${yellowf}  ▀███████▀${reset}   ${redf}▀   ▀  ▀   ▀${reset}  ${greenf}▀   ▀  ▀   ▀${reset}  ${bluef}▀   ▀  ▀   ▀${reset}  ${purplef}▀   ▀  ▀   ▀${reset}  ${cyanf}▀   ▀  ▀   ▀${reset}

 ${boldon}${yellowf}  ▄███████▄   ${redf}  ▄██████▄    ${greenf}  ▄██████▄    ${bluef}  ▄██████▄    ${purplef}  ▄██████▄    ${cyanf}  ▄██████▄${reset}
 ${boldon}${yellowf}▄█████████▀▀  ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄  ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄  ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄  ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄  ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
 ${boldon}${yellowf}███████▀      ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███  ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███  ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███  ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███  ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
 ${boldon}${yellowf}███████▄      ${redf}████████████  ${greenf}████████████  ${bluef}████████████  ${purplef}████████████  ${cyanf}████████████${reset}
 ${boldon}${yellowf}▀█████████▄▄  ${redf}██▀██▀▀██▀██  ${greenf}██▀██▀▀██▀██  ${bluef}██▀██▀▀██▀██  ${purplef}██▀██▀▀██▀██  ${cyanf}██▀██▀▀██▀██${reset}
 ${boldon}${yellowf}  ▀███████▀   ${redf}▀   ▀  ▀   ▀  ${greenf}▀   ▀  ▀   ▀  ${bluef}▀   ▀  ▀   ▀  ${purplef}▀   ▀  ▀   ▀  ${cyanf}▀   ▀  ▀   ▀${reset}

EOF
#+end_src

*** invade-em
:PROPERTIES:
:header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
:END:

#+begin_src bash
#
# ANSI color scheme script featuring Space Invaders
#
# Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
# Modified by lolilolicon
#

f=3 b=4
for j in f b; do
  for i in {0..7}; do
    printf -v $j$i %b "\e[${!j}${i}m"
  done
done
bld=$'\e[1m'
rst=$'\e[0m'

cat << EOF

 $f1  ▀▄   ▄▀     $f2 ▄▄▄████▄▄▄    $f3  ▄██▄     $f4  ▀▄   ▄▀     $f5 ▄▄▄████▄▄▄    $f6  ▄██▄  $rst
 $f1 ▄█▀███▀█▄    $f2███▀▀██▀▀███   $f3▄█▀██▀█▄   $f4 ▄█▀███▀█▄    $f5███▀▀██▀▀███   $f6▄█▀██▀█▄$rst
 $f1█▀███████▀█   $f2▀▀███▀▀███▀▀   $f3▀█▀██▀█▀   $f4█▀███████▀█   $f5▀▀███▀▀███▀▀   $f6▀█▀██▀█▀$rst
 $f1▀ ▀▄▄ ▄▄▀ ▀   $f2 ▀█▄ ▀▀ ▄█▀    $f3▀▄    ▄▀   $f4▀ ▀▄▄ ▄▄▀ ▀   $f5 ▀█▄ ▀▀ ▄█▀    $f6▀▄    ▄▀$rst

 $bld$f1▄ ▀▄   ▄▀ ▄   $f2 ▄▄▄████▄▄▄    $f3  ▄██▄     $f4▄ ▀▄   ▄▀ ▄   $f5 ▄▄▄████▄▄▄    $f6  ▄██▄  $rst
 $bld$f1█▄█▀███▀█▄█   $f2███▀▀██▀▀███   $f3▄█▀██▀█▄   $f4█▄█▀███▀█▄█   $f5███▀▀██▀▀███   $f6▄█▀██▀█▄$rst
 $bld$f1▀█████████▀   $f2▀▀▀██▀▀██▀▀▀   $f3▀▀█▀▀█▀▀   $f4▀█████████▀   $f5▀▀▀██▀▀██▀▀▀   $f6▀▀█▀▀█▀▀$rst
 $bld$f1 ▄▀     ▀▄    $f2▄▄▀▀ ▀▀ ▀▀▄▄   $f3▄▀▄▀▀▄▀▄   $f4 ▄▀     ▀▄    $f5▄▄▀▀ ▀▀ ▀▀▄▄   $f6▄▀▄▀▀▄▀▄$rst


                                     $f7▌$rst

                                   $f7▌$rst

                              $f7    ▄█▄    $rst
                              $f7▄█████████▄$rst
                              $f7▀▀▀▀▀▀▀▀▀▀▀$rst

EOF
#+end_src