2 #+property: header-args :comments link :mkdirp yes :results silent
6 This org file contains the configuration files of pretty much every
7 program I use. The files are tangled (i.e. exported, or derived) from
8 this file using =org-babel=.
10 Note: This file is best viewed inside Emacs with org mode.
14 This section contains the configuration files (dotfiles) of various
19 :header-args+: :tangle ~/.config/compton.conf
22 #+begin_src conf :tangle no
24 shadow = false; # Enabled client-side shadows on windows.
25 no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows.
26 no-dnd-shadow = true; # Don't draw shadows on DND windows.
27 clear-shadow = true; # Zero the part of the shadow's mask behind the
28 # window. Fix some weirdness with ARGB windows.
29 shadow-radius = 5; # The blur radius for shadows. (default 12)
30 shadow-offset-x = -5; # The left offset for shadows. (default -15)
31 shadow-offset-y = -5; # The top offset for shadows. (default -15)
32 # shadow-opacity = 0.7; # The translucency for shadows. (default .75)
33 # shadow-red = 0.0; # Red color value of shadow. (0.0 - 1.0, defaults to 0)
34 # shadow-green = 0.0; # Green color value of shadow. (0.0 - 1.0, defaults to 0)
35 # shadow-blue = 0.0; # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
36 shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ]; # Exclude conditions for shadows.
37 # shadow-exclude = "n:e:Notification";
38 #shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
39 shadow-ignore-shaped = true; # Avoid drawing shadow on all shaped windows
40 # (see also: --detect-rounded-corners)
43 menu-opacity = 1.0; # The opacity for menus. (default 1.0)
44 #inactive-opacity = 0.9; # Default opacity of inactive windows. (0.0 - 1.0)
45 # active-opacity = 0.8; # Default opacity for active windows. (0.0 - 1.0)
46 frame-opacity = 1.0; # Opacity of window titlebars and borders. (0.1 - 1.0)
47 # inactive-opacity-override = true; # Let inactive opacity set by 'inactive-opacity' overrides
48 # value of _NET_WM_OPACITY. Bad choice.
49 alpha-step = 0.06; # XRender backend: Step size for alpha pictures. Increasing
50 # it may result in less X resource usage,
51 # Yet fading may look bad.
52 #inactive-dim = 0.5; # Dim inactive windows. (0.0 - 1.0)
53 #inactive-dim-fixed = true; # Do not let dimness adjust based on window opacity.
54 # blur-background = true; # Blur background of transparent windows.
55 # Bad performance with X Render backend.
56 # GLX backend is preferred.
57 # blur-background-frame = true; # Blur background of opaque windows with transparent
59 blur-background-fixed = true; # Do not let blur radius adjust based on window opacity.
60 blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
61 # Exclude conditions for background blur.
64 fading = false; # Fade windows during opacity changes.
65 fade-delta = 3; # The time between steps in a fade in milliseconds. (default 10).
66 fade-in-step = 0.03; # Opacity change between steps while fading in. (default 0.028).
67 fade-out-step = 0.03; # Opacity change between steps while fading out. (default 0.03).
68 # no-fading-openclose = true; # Avoid fade windows in/out when opening/closing.
69 fade-exclude = [ ]; # Exclude conditions for fading.
72 backend = "glx" # Backend to use: "xrender" or "glx". GLX backend is typically
73 # much faster but depends on a sane driver.
74 mark-wmwin-focused = true; # Try to detect WM windows and mark them as active.
75 mark-ovredir-focused = true; # Mark all non-WM but override-redirect windows active (e.g. menus).
76 use-ewmh-active-win = true; # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
77 # instead of using FocusIn/Out events. Usually more reliable but
78 # depends on a EWMH-compliant WM.
79 detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
80 detect-client-opacity = true; # Detect _NET_WM_OPACITY on client windows, useful for window
81 # managers not passing _NET_WM_OPACITY of client windows to frame
83 refresh-rate = 0; # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
84 vsync = "drm"; # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
85 # See man page for more details.
86 dbe = false; # Enable DBE painting mode. Rarely needed.
87 paint-on-overlay = true; # Painting on X Composite overlay window. Recommended.
88 sw-opti = false; # Limit compton to repaint at most once every 1 / refresh_rate.
89 # Incompatible with certain VSync methods.
90 unredir-if-possible = false; # Unredirect all windows if a full-screen opaque window is
91 # detected, to maximize performance for full-screen windows.
92 focus-exclude = [ ]; # A list of conditions of windows that should always be considered
94 detect-transient = true; # Use WM_TRANSIENT_FOR to group windows, and consider windows in
95 # the same group focused at the same time.
96 detect-client-leader = true; # Use WM_CLIENT_LEADER to group windows.
97 invert-color-include = [ ]; # Conditions for windows to be painted with inverted color.
99 # GLX backend # GLX backend fine-tune options. See man page for more info.
100 glx-no-stencil = true; # Recommended.
101 glx-copy-from-front = false; # Useful with --glx-swap-method,
102 # glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
103 # glx-no-rebind-pixmap = true; # Recommended if it works.
104 glx-no-rebind-pixmap = true; # Recommended if it works.
105 #glx-swap-method = "4"; # See man page.
106 glx-swap-method = "4"; # See man page.
108 # Window type settings
111 tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
112 menu = { shadow = false; };
113 dropdown_menu = { shadow = false; };
114 popup_menu = { shadow = false; };
115 utility = { shadow = false; };
116 # fade: Fade the particular type of windows.
117 # shadow: Give those windows shadow
118 # opacity: Default opacity for the type of windows.
119 # focus: Whether to always consider windows of this type focused.
125 :header-args+: :tangle "/sudo::/etc/dovecot/dovecot.conf"
132 log_path = /var/log/dovecot.log
133 info_log_path = /var/log/dovecot-info.log
136 disable_plaintext_auth = no
139 auth_mechanisms = plain
143 args = /etc/dovecot/passwd
148 args = uid=amin gid=amin home=/home/amin/mail/%d/%n
149 default_fields = mail=maildir:/home/amin/mail/%d/%n/mail
152 # mail_home = /home/amin/mail/%d/%n
153 # mail_location = maildir:/home/amin/mail/%d/%n/mail:LAYOUT=fs:INBOX=/home/amin/mail/%d/%n/mail/Inbox
160 mail_plugins = $mail_plugins fts fts_lucene
164 fts_lucene = whitespace_chars=@.
171 :header-args+: :tangle ~/.config/dunst/dunstrc
176 #font = Ubuntu Mono 10.5
177 font = Inconsolata 11
179 # Path to default icons.
180 icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
185 # <s>strikethrough<s/>
188 # The format of the message. Possible variables are:
192 # %i iconname (including its path)
193 # %I iconname (without its path)
194 # %p progress value if set ([ 0%] to [100%]) or nothing
196 format = "<b>%s</b>\n%b"
197 # Sort messages by urgency
199 # Show how many messages are currently hidden (because of geometry)
201 # Alignment of message text.
202 # Possible values are "left", "center" and "right"
204 # The frequency with wich text that is longer than the notification
205 # window allows bounces back and forth.
206 # This option conflicts with 'word_wrap'.
207 # Set to 0 to disable
209 # show age of message if message is older than show_age_threshold seconds.
210 # set to -1 to disable
211 show_age_threshold = -1
212 # split notifications into multiple lines if they don't fit into geometry
214 # ignore newlines '\n' in notifications
216 # The geometry of the message window.
217 # geometry [{width}]x{height}][+/-{x}+/-{y}]
218 # The height is measured in number of notifications everything else in pixels. If the width
219 # is omitted but the height is given ("-geometry x2"), the message window
220 # expands over the whole screen (dmenu-like). If width is 0,
221 # the window expands to the longest message displayed.
222 # A positive x is measured from the left, a negative from the
223 # right side of the screen. Y is measured from the top and down respectevly.
224 # The width can be negative. In this case the actual width is the
225 # screen width minus the width defined in within the geometry option.
226 #geometry = "410x12-12+12"
227 #geometry = "0x0-30-30"
228 geometry = "260x12-30-30"
229 # The transparency of the window. range: [0; 100]
230 # This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
232 # Don't remove messages, if the user is idle (no mouse or keyboard input)
233 # for longer than idle_threshold seconds.
234 # Set to 0 to disable.
236 # Which monitor should the notifications be displayed on.
238 # Display notification on focused monitor. Possible modes are:
239 # mouse: follow mouse pointer
240 # keyboard: follow window with keyboard focus
241 # none: don't follow anything
243 # "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
244 # This should be the case for almost all modern windowmanagers.
246 # If this option is set to mouse or keyboard, the monitor option will be
249 # should a notification popped up from history be sticky or
250 # timeout as if it would normally do.
252 # The height of a single line. If the height is smaller than the font height,
253 # it will get raised to the font height.
254 # This adds empty space above and under the text.
257 show_indicators = yes
259 # Draw a line of 'separatpr_height' pixel height between two notifications.
260 # Set to 0 to disable
262 # padding between text and separator
265 horizontal_padding = 8
266 # Define a color for the separator.
267 # possible values are:
268 # * auto: dunst tries to find a color fitting to the background
269 # * foreground: use the same color as the foreground
270 # * frame: use the same color as the frame.
271 # * anything else will be interpreted as a X color
272 separator_color = foreground
273 # print a notification on startup
274 # This is mainly for error detection, since dbus (re-)starts dunst
275 # automatically after a crash.
276 startup_notification = false
278 #dmenu = /usr/bin/dmenu -p dunst:
279 dmenu = /usr/bin/rofi -dmenu -p dunst:
280 # browser for opening urls in context menu
281 browser = /usr/bin/firefox -new-tab
286 # shortcuts are specified as [modifier+][modifier+]...key
287 # available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
288 # and 'mod4' (windows-key)
289 # xev might be helpful to find names for keys
292 # close all notifications
293 close_all = ctrl+shift+space
294 # redisplay last message(s)
295 # On the US keyboard layout 'grave' is normally above TAB and left of '1'.
296 history = ctrl+shift+h
298 context = ctrl+shift+period
300 # IMPORTANT: colors have to be defined in quotation marks.
301 # Otherwise the '#' and following would be interpreted as a comment.
302 background = "#1d2a30"
303 foreground = "#71c2af"
306 background = "#1d2a30"
307 foreground = "#71c2af"
310 background = "#1d2a30"
311 foreground = "#ff9982"
314 # Every section that isn't one of the above is interpreted as a rules
315 # to override settings for certain messages.
316 # Messages can be matched by 'appname', 'summary', 'body' or 'icon'
317 # and you can override the 'timeout', 'urgency', 'foreground', 'background'
319 # Shell-like globbing will get expanded.
322 # you can specify a script that gets run when the rule matches by setting
323 # the 'script' option.
324 # The script will be called as follows:
325 # script appname summary body icon urgency
326 # where urgency can be "LOW", "NORMAL" or "CRITICAL".
328 # NOTE: if you don't want a notification to be displayed, set the format to ""
329 # NOTE: It might be helpful to run dunst -print in a terminal in order to find
330 # fitting options for rules.
333 # script = dunst_espeak.sh
335 # summary = "*script*"
336 # script = dunst_test.sh
338 ## This notification will not be displayed
343 # summary = "*signed on*"
348 # summary = *signed off*
358 # summary = *twitter.com*
362 summary = *Brightness*
368 :header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
372 <?xml version="1.0"?>
373 <!DOCTYPE fontconfig SYSTEM "fonts.dtd">
375 <match target="font">
376 <edit mode="assign" name="rgba">
380 <match target="font">
381 <edit mode="assign" name="hinting">
385 <match target="font">
386 <edit mode="assign" name="hintstyle">
387 <const>hintslight</const>
390 <match target="font">
391 <edit mode="assign" name="antialias">
395 <match target="font">
396 <edit mode="assign" name="lcdfilter">
397 <const>lcddefault</const>
402 <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
403 <alias binding="same">
404 <family>Helvetica</family>
406 <family>Liberation Sans</family>
416 :header-args+: :tangle ~/.getmail/getmailrc
421 type = SimplePOP3SSLRetriever
422 server = fencepost.gnu.org
424 password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
430 path = ~/mail/gnu/Inbox/
433 # type = MDA_external
434 # path = /usr/lib/dovecot/deliver
435 # arguments = ('-d', 'amin@aminb.org')
443 :header-args+: :tangle ~/.config/systemd/user/getmail.service
446 #+begin_src conf :tangle no
448 Description=getmail service
452 ExecStart=/usr/bin/getmail
453 StandardOutput=syslog
459 :header-args+: :tangle ~/.config/systemd/user/getmail.timer
462 #+begin_src conf :tangle no
464 Description=getmail timer
472 WantedBy=timers.target
479 :header-args+: :tangle ~/.gitconfig
486 email = bandali@gnu.org
487 signingkey = BE6273738E616D6D1B3A08E8A21A020248816103
501 autocrlf = input # CRLF -> LF on commit
502 editor = emacsclient -t
503 excludesfile = ~/.gitignore_global
516 git = !exec git # handle nested git calls, e.g. git git status
517 aliases = config --get-regexp '^alias\\.'
529 nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f"
530 nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f"
543 remote = magenta bold
552 # showUntrackedFiles = all
567 smtpserver = fencepost.gnu.org
575 :header-args+: :tangle ~/.gitignore_global
590 :header-args+: :tangle ~/.gnupg/gpg-agent.conf
594 default-cache-ttl 43200
597 default-cache-ttl-ssh 10800
598 max-cache-ttl-ssh 10800
600 # pinentry-program /usr/bin/pinentry-qt
607 :header-args+: :tangle ~/.gtkrc-2.0
611 gtk-theme-name="Greybird"
612 gtk-icon-theme-name="Paper"
613 gtk-font-name="Ubuntu 10"
615 # gtk-key-theme-name = "Emacs"
620 :header-args+: :tangle ~/.config/gtk-3.0/settings.ini
623 #+begin_src conf :tangle no
625 gtk-icon-theme-name = Paper
626 # gtk-theme-name = Adwaita
628 gtk-theme-name = Greybird
629 # gtk-theme-name = Arc-Darker
630 # gtk-theme-name = Numix-ArchBlue
632 gtk-font-name = Ubuntu 10
633 # gtk-key-theme-name = Emacs
636 ** [[https://github.com/Leinnan/i3gs][i3gs]]
638 :header-args+: :tangle ~/.config/i3gs/config
641 #+begin_src conf :comments none :tangle no
642 borders_width=0 0 2 0
647 #title=<span weight='heavy' fgcolor='#7FDBFF'> </span>
648 #borders_color=#7FDBFF
652 title=<span weight='heavy' fgcolor='#3D9970'> </span>
653 borders_color=#3D9970
657 #title=<span weight='heavy' fgcolor='#2ECC40'> </span>
658 #borders_color=#2ECC40
662 #title=<span weight='heavy' fgcolor='#01FF70'> </span>
663 #borders_color=#01FF70
667 title=<span weight='heavy' fgcolor='#7FDBFF'></span>
668 borders_color=#7FDBFF
672 command=battery-percentage-time
673 title=<span weight='heavy' fgcolor='#39CCCC'> </span>
674 borders_color=#39CCCC
678 title=<span weight='heavy' fgcolor='#01FF70'> </span>
679 borders_color=#01FF70
683 command=date '+%-I:%M, %a %b %d '
684 title=<span weight='heavy' fgcolor='#FFDC00'> </span>
685 borders_color=#FFDC00
691 :header-args+: :tangle ~/.config/i3status/config
694 #+begin_src conf :comments none
695 # i3status configuration file.
696 # see "man i3status" for documentation.
698 # It is important that this file is edited as UTF-8.
699 # The following line should contain a sharp s:
701 # If the above line is not correctly displayed, fix your editor first!
706 output_format = "i3bar"
711 order += "disk /data"
712 # order += "wireless _first_"
713 order += "ethernet _first_"
715 order += "volume master"
717 order += "tztime local"
720 format_up = "W:%quality %essid %ip"
721 format_down = "W: down"
725 # if you use %speed, i3status requires root privileges
726 format_up = "E: %ip (%speed)"
727 format_down = "E: down"
731 format = "%status %percentage %remaining (%consumption)"
732 path = "/sys/class/power_supply/BAT%d/uevent"
734 threshold_type = "percentage"
735 last_full_capacity = true
736 integer_battery_capacity = true
741 format = "%-I:%M%P %a %b %d"
746 format_muted = "🔇 %volume"
759 format = "/data %avail"
767 :header-args+: :tangle ~/.mbsyncrc
780 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
783 IMAPStore amin-remote
786 IMAPAccount amin-dovecot
790 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin-dovecot.gpg"
802 IMAPAccount uwaterloo
803 Host connect.uwaterloo.ca
805 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
808 IMAPStore uwaterloo-remote
811 IMAPAccount uwaterloo-dovecot
814 User abandali@uwaterloo.ca
815 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo-dovecot.gpg"
818 IMAPStore uwaterloo-local
819 Account uwaterloo-dovecot
822 Master :uwaterloo-remote:
823 Slave :uwaterloo-local:
829 :header-args+: :tangle ~/.config/systemd/user/mbsync.service
832 #+begin_src conf :tangle no
834 Description=mbsync service
838 ExecStart=/usr/bin/mbsync -Va
839 StandardOutput=syslog
845 :header-args+: :tangle ~/.config/systemd/user/mbsync.timer
848 #+begin_src conf :tangle no
850 Description=mbsync timer
858 WantedBy=timers.target
863 :header-args+: :tangle ~/.latexmkrc
867 $pdf_previewer = "start zathura %O %S";
868 $clean_ext = "aux out";
870 # $pdf_update_method = 4;
871 # $pdf_update_command = "zathura %O %S";
873 # Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
874 # by Ctrl+click in the PDF.
875 # Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
877 # $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
882 Improve XPS 15 9560's touchpad experience.
884 # begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
885 #+begin_src conf :tangle no
887 Identifier "libinput touchpad catchall"
890 Option "ClickMethod" "clickfinger"
891 Option "NaturalScrolling" "true"
892 Option "Tapping" "on"
893 Option "TappingButtonMap" "lrm"
899 :header-args+: :tangle ~/.config/mpd/mpd.conf
903 # An example configuration file for MPD.
904 # Read the user manual for documentation: http://www.musicpd.org/doc/user/
907 # Files and directories #######################################################
909 # This setting controls the top directory which MPD will search to discover the
910 # available audio files and add them to the daemon's online database. This
911 # setting defaults to the XDG directory, otherwise the music directory will be
912 # be disabled and audio files will only be accepted over ipc socket (using
913 # file:// protocol) or streaming files over an accepted protocol.
915 music_directory "~/usr/music"
917 # This setting sets the MPD internal playlist directory. The purpose of this
918 # directory is storage for playlists created by MPD. The server will use
919 # playlist files not created by the server but only if they are in the MPD
920 # format. This setting defaults to playlist saving being disabled.
922 playlist_directory "~/.mpd/playlists"
924 # This setting sets the location of the MPD database. This file is used to
925 # load the database at server start up and store the database while the
926 # server is not up. This setting defaults to disabled which will allow
927 # MPD to accept files over ipc socket (using file:// protocol) or streaming
928 # files over an accepted protocol.
930 db_file "~/.mpd/database"
932 # These settings are the locations for the daemon log files for the daemon.
933 # These logs are great for troubleshooting, depending on your log_level
936 # The special value "syslog" makes MPD use the local syslog daemon. This
937 # setting defaults to logging to syslog, otherwise logging is disabled.
939 log_file "~/.mpd/log"
941 # This setting sets the location of the file which stores the process ID
942 # for use of mpd --kill and some init scripts. This setting is disabled by
943 # default and the pid file will not be stored.
945 pid_file "~/.mpd/pid"
947 # This setting sets the location of the file which contains information about
948 # most variables to get MPD back into the same general shape it was in before
949 # it was brought down. This setting is disabled by default and the server
950 # state will be reset on server start up.
952 state_file "~/.mpd/state"
954 # The location of the sticker database. This is a database which
955 # manages dynamic information attached to songs.
957 sticker_file "~/.mpd/sticker.sql"
959 ###############################################################################
962 # General music daemon options ################################################
964 # This setting specifies the user that MPD will run as. MPD should never run as
965 # root and you may use this setting to make MPD change its user ID after
966 # initialization. This setting is disabled by default and MPD is run as the
971 # This setting specifies the group that MPD will run as. If not specified
972 # primary group of user specified with "user" setting will be used (if set).
973 # This is useful if MPD needs to be a member of group such as "audio" to
974 # have permission to use sound card.
978 # This setting sets the address for the daemon to listen on. Careful attention
979 # should be paid if this is assigned to anything other then the default, any.
980 # This setting can deny access to control of the daemon. Not effective if
981 # systemd socket activiation is in use.
984 #bind_to_address "any"
986 # And for Unix Socket
987 #bind_to_address "~/.mpd/socket"
989 # This setting is the TCP port that is desired for the daemon to get assigned
994 # This setting controls the type of information which is logged. Available
995 # setting arguments are "default", "secure" or "verbose". The "verbose" setting
996 # argument is recommended for troubleshooting, though can quickly stretch
997 # available resources on limited hardware storage.
1001 # If you have a problem with your MP3s ending abruptly it is recommended that
1002 # you set this argument to "no" to attempt to fix the problem. If this solves
1003 # the problem, it is highly recommended to fix the MP3 files with vbrfix
1004 # (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
1005 # point gapless MP3 playback can be enabled.
1007 #gapless_mp3_playback "yes"
1009 # Setting "restore_paused" to "yes" puts MPD into pause mode instead
1010 # of starting playback after startup.
1012 #restore_paused "no"
1014 # This setting enables MPD to create playlists in a format usable by other
1017 #save_absolute_paths_in_playlists "no"
1019 # This setting defines a list of tag types that will be extracted during the
1020 # audio file discovery process. The complete list of possible values can be
1021 # found in the user manual.
1022 #metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
1024 # This setting enables automatic update of MPD's database when files in
1025 # music_directory are changed.
1029 # Limit the depth of the directories being watched, 0 means only watch
1030 # the music directory itself. There is no limit by default.
1032 #auto_update_depth "3"
1034 ###############################################################################
1037 # Symbolic link behavior ######################################################
1039 # If this setting is set to "yes", MPD will discover audio files by following
1040 # symbolic links outside of the configured music_directory.
1042 #follow_outside_symlinks "yes"
1044 # If this setting is set to "yes", MPD will discover audio files by following
1045 # symbolic links inside of the configured music_directory.
1047 #follow_inside_symlinks "yes"
1049 ###############################################################################
1052 # Zeroconf / Avahi Service Discovery ##########################################
1054 # If this setting is set to "yes", service information will be published with
1057 #zeroconf_enabled "yes"
1059 # The argument to this setting will be the Zeroconf / Avahi unique name for
1060 # this MPD server on the network.
1062 #zeroconf_name "Music Player"
1064 ###############################################################################
1067 # Permissions #################################################################
1069 # If this setting is set, MPD will require password authorization. The password
1070 # setting can be specified multiple times for different password profiles.
1072 #password "password@read,add,control,admin"
1074 # This setting specifies the permissions a user has who has not yet logged in.
1076 #default_permissions "read,add,control,admin"
1078 ###############################################################################
1081 # Database #######################################################################
1086 # host "other.mpd.host"
1090 # Input #######################################################################
1095 # proxy "proxy.isp.com:8080"
1097 # proxy_password "password"
1101 ###############################################################################
1103 # Audio Output ################################################################
1114 path "/tmp/mpd.fifo"
1118 # MPD supports various audio output types, as well as playing through multiple
1119 # audio outputs at the same time, through multiple audio_output settings
1120 # blocks. Setting this block is optional, though the server will only attempt
1121 # autodetection for one sound card.
1123 # An example of an ALSA output:
1127 # name "My ALSA Device"
1128 ## device "hw:0,0" # optional
1129 ## mixer_type "hardware" # optional
1130 ## mixer_device "default" # optional
1131 ## mixer_control "PCM" # optional
1132 ## mixer_index "0" # optional
1135 # An example of an OSS output:
1139 # name "My OSS Device"
1140 ## device "/dev/dsp" # optional
1141 ## mixer_type "hardware" # optional
1142 ## mixer_device "/dev/mixer" # optional
1143 ## mixer_control "PCM" # optional
1146 # An example of a shout output (for streaming to Icecast):
1150 # encoder "vorbis" # optional
1151 # name "My Shout Stream"
1158 # format "44100:16:1"
1159 ## protocol "icecast2" # optional
1160 ## user "source" # optional
1161 ## description "My Stream Description" # optional
1162 ## url "http://example.com" # optional
1163 ## genre "jazz" # optional
1164 ## public "no" # optional
1165 ## timeout "2" # optional
1166 ## mixer_type "software" # optional
1169 # An example of a recorder output:
1173 # name "My recorder"
1174 # encoder "vorbis" # optional, vorbis or lame
1175 # path "/var/lib/mpd/recorder/mpd.ogg"
1176 ## quality "5.0" # do not define if bitrate is defined
1177 # bitrate "128" # do not define if quality is defined
1178 # format "44100:16:1"
1181 # An example of a httpd output (built-in HTTP streaming server):
1185 # name "My HTTP Stream"
1186 # encoder "vorbis" # optional, vorbis or lame
1188 # bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
1189 ## quality "5.0" # do not define if bitrate is defined
1190 # bitrate "128" # do not define if quality is defined
1191 # format "44100:16:1"
1192 # max_clients "0" # optional 0=no limit
1195 # An example of a pulseaudio output (streaming to a remote pulseaudio server)
1199 # name "My Pulse Output"
1200 ## server "remote_server" # optional
1201 ## sink "remote_server_sink" # optional
1204 # An example of a winmm output (Windows multimedia API).
1208 # name "My WinMM output"
1209 ## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1211 ## device "0" # optional
1212 ## mixer_type "hardware" # optional
1215 # An example of an openal output.
1219 # name "My OpenAL output"
1220 ## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1223 # An example of an sndio output.
1227 # name "sndio output"
1228 # mixer_type "software"
1231 # An example of an OS X output:
1235 # name "My OS X Device"
1236 ## device "Built-in Output" # optional
1237 ## channel_map "-1,-1,0,1" # optional
1240 ## Example "pipe" output:
1245 # command "aplay -f cd 2>/dev/null"
1246 ## Or if you're want to use AudioCompress
1247 # command "AudioCompress -m | aplay -f cd 2>/dev/null"
1248 ## Or to send raw PCM stream through PCM:
1249 # command "nc example.org 8765"
1250 # format "44100:16:2"
1253 ## An example of a null output (for no audio output):
1257 # name "My Null Output"
1258 # mixer_type "none" # optional
1261 ###############################################################################
1264 # Normalization automatic volume adjustments ##################################
1266 # This setting specifies the type of ReplayGain to use. This setting can have
1267 # the argument "off", "album", "track" or "auto". "auto" is a special mode that
1268 # chooses between "track" and "album" depending on the current state of
1269 # random playback. If random playback is enabled then "track" mode is used.
1270 # See <http://www.replaygain.org> for more details about ReplayGain.
1271 # This setting is off by default.
1275 # This setting sets the pre-amp used for files that have ReplayGain tags. By
1276 # default this setting is disabled.
1278 #replaygain_preamp "0"
1280 # This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1281 # By default this setting is disabled.
1283 #replaygain_missing_preamp "0"
1285 # This setting enables or disables ReplayGain limiting.
1286 # MPD calculates actual amplification based on the ReplayGain tags
1287 # and replaygain_preamp / replaygain_missing_preamp setting.
1288 # If replaygain_limit is enabled MPD will never amplify audio signal
1289 # above its original level. If replaygain_limit is disabled such amplification
1290 # might occur. By default this setting is enabled.
1292 #replaygain_limit "yes"
1294 # This setting enables on-the-fly normalization volume adjustment. This will
1295 # result in the volume of all playing audio to be adjusted so the output has
1296 # equal "loudness". This setting is disabled by default.
1298 #volume_normalization "no"
1300 ###############################################################################
1302 # Character Encoding ##########################################################
1304 # If file or directory names do not display correctly for your locale then you
1305 # may need to modify this setting.
1307 #filesystem_charset "UTF-8"
1309 ###############################################################################
1314 :header-args+: :tangle ~/.msmtprc
1318 # Set default values for all following accounts.
1323 #tls_trust_file /etc/ssl/certs/ca-certificates.crt
1324 logfile ~/.msmtp.log
1329 # use `msmtp -a aminb --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1330 tls_fingerprint DE:5F:73:0C:F7:9A:7B:1D:55:AA:49:28:E7:28:49:24:A4:08:55:00:7A:7E:D8:7F:30:06:26:24:11:29:61:07
1334 passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
1336 account bandali-me : aminb
1337 from amin@bandali.me
1341 host fencepost.gnu.org
1342 # use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1343 tls_fingerprint FB:DB:E3:7D:96:22:22:20:9F:4A:FD:70:96:99:50:5C:39:B2:29:D9:47:47:52:A8:5A:4A:DF:70:9D:21:DE:C4
1345 from bandali@gnu.org
1347 passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
1350 account gnu-aminb : gnu
1352 account gnu-amin : gnu
1354 account gnu-mab : gnu
1359 host connect.uwaterloo.ca
1361 from abandali@uwaterloo.ca
1363 passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
1364 tls_trust_file /etc/ssl/certs/ca-certificates.crt
1366 # Set a default account
1367 account default : aminb
1374 :header-args+: :tangle ~/.ncmpcpp/config
1377 #+begin_src conf :tangle no
1378 ##############################################################
1379 ## This is the example configuration file. Copy it to ##
1380 ## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
1381 ## and set up your preferences. ##
1382 ##############################################################
1384 ##### directories ######
1386 ## Directory for storing ncmpcpp related files.
1387 ## Changing it is useful if you want to store
1388 ## everything somewhere else and provide command
1389 ## line setting for alternative location to config
1390 ## file which defines that while launching ncmpcpp.
1393 ncmpcpp_directory = ~/.ncmpcpp
1396 ## Directory for storing downloaded lyrics. It
1397 ## defaults to ~/.lyrics since other MPD clients
1398 ## (eg. ncmpc) also use that location.
1401 #lyrics_directory = ~/.lyrics
1403 ##### connection settings #####
1405 #mpd_host = localhost
1409 #mpd_connection_timeout = 5
1411 ## Needed for tag editor and file operations to work.
1413 mpd_music_dir = ~/usr/music
1415 #mpd_crossfade_time = 5
1417 ##### music visualizer #####
1419 ## Note: In order to make music visualizer work you'll
1420 ## need to use mpd fifo output, whose format parameter
1421 ## has to be set to 44100:16:1 for mono visualization
1422 ## or 44100:16:2 for stereo visualization. Example
1423 ## configuration (it has to be put into mpd.conf):
1427 ## name "Visualizer feed"
1428 ## path "/tmp/mpd.fifo"
1429 ## format "44100:16:2"
1433 visualizer_fifo_path = /tmp/mpd.fifo
1436 ## Note: Below parameter is needed for ncmpcpp
1437 ## to determine which output provides data for
1438 ## visualizer and thus allow syncing between
1439 ## visualization and sound as currently there
1440 ## are some problems with it.
1443 visualizer_output_name = my fifo
1446 ## If you set format to 44100:16:2, make it 'yes'.
1448 visualizer_in_stereo = yes
1451 ## Multiply received samples by given value. Very
1452 ## useful for proper visualization of quiet music.
1454 #visualizer_sample_multiplier = 1
1457 ## Note: Below parameter defines how often ncmpcpp
1458 ## has to "synchronize" visualizer and audio outputs.
1459 ## 30 seconds is optimal value, but if you experience
1460 ## synchronization problems, set it to lower value.
1461 ## Keep in mind that sane values start with >=10.
1464 visualizer_sync_interval = 30
1467 ## Note: To enable spectrum frequency visualization
1468 ## you need to compile ncmpcpp with fftw3 support.
1471 ## Available values: spectrum, wave, wave_filled, ellipse.
1473 visualizer_type = spectrum
1475 #visualizer_look = ●▮
1476 visualizer_look = "●•"
1478 #visualizer_color = blue, cyan, green, yellow, magenta, red
1480 ## Alternative subset of 256 colors for terminals that support it.
1482 #visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
1484 ##### system encoding #####
1486 ## ncmpcpp should detect your charset encoding
1487 ## but if it failed to do so, you can specify
1488 ## charset encoding you are using here.
1490 ## Note: You can see whether your ncmpcpp build
1491 ## supports charset detection by checking output
1492 ## of `ncmpcpp --version`.
1494 ## Note: Since MPD uses UTF-8 by default, setting
1495 ## this option makes sense only if your encoding
1499 #system_encoding = ""
1503 ## Time of inactivity (in seconds) after playlist
1504 ## highlighting will be disabled (0 = always on).
1506 #playlist_disable_highlight_delay = 5
1508 ## Defines how long messages are supposed to be visible.
1510 #message_delay_time = 5
1512 ##### song format #####
1514 ## For a song format you can use:
1520 ## %A - album artist
1524 ## %n - track number (01/12 -> 01)
1525 ## %N - full track info (01/12 -> 01/12)
1532 ## $R - begin right alignment
1534 ## If you want to make sure that a part of the format is displayed
1535 ## only when certain tags are present, you can archieve it by
1536 ## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
1537 ## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
1538 ## It is also possible to define a list of alternatives by providing
1539 ## several groups and separating them with '|', e.g. '{%t}|{%f}'
1540 ## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
1543 ## Note: If you want to set limit on maximal length of a tag, just
1544 ## put the appropriate number between % and character that defines
1545 ## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
1547 ## In addition, formats support markers used for text attributes.
1548 ## They are followed by character '$'. After that you can put:
1550 ## - 0 - default window color (discards all other colors)
1559 ## - 9 - end of current color
1561 ## - u - underline text
1562 ## - r - reverse colors
1563 ## - a - use alternative character set
1565 ## If you don't want to use a non-color attribute anymore, just put it
1566 ## again, but this time insert character '/' between '$' and attribute
1567 ## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
1568 ## or filename with reversed colors.
1570 ## If you want to use 256 colors and/or background colors in formats
1571 ## (the naming scheme is described below in section about color
1572 ## definitions), it can be done with the syntax $(COLOR), e.g. to set
1573 ## the artist tag to one of the non-standard colors and make it have
1574 ## yellow background, you need to write $(197_yellow)%a$(end). Note
1575 ## that for standard colors this is interchangable with attributes
1578 ## Note: colors can be nested.
1581 #song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
1583 #song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
1585 #song_library_format = {%n - }{%t}|{%f}
1588 #alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
1590 #alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
1592 #now_playing_prefix = $b
1594 #now_playing_suffix = $/b
1596 #browser_playlist_prefix = "$2playlist$9 "
1598 #selected_item_prefix = $6
1600 #selected_item_suffix = $9
1602 #modified_item_prefix = $3> $9
1605 ## Note: attributes are not supported for the following variables.
1607 #song_window_title_format = {%a - }{%t}|{%f}
1609 ## Note: Below variables are used for sorting songs in browser.
1610 ## The sort mode determines how songs are sorted, and can be used
1611 ## in combination with a sort format to specify a custom sorting format.
1612 ## Available values for browser_sort_mode are "name", "mtime", "format"
1616 #browser_sort_mode = name
1618 #browser_sort_format = {%a - }{%t}|{%f} {(%l)}
1620 ##### columns settings #####
1622 ## syntax of song columns list format is "column column etc."
1624 ## - syntax for each column is:
1626 ## (width of the column)[color of the column]{displayed tag}
1628 ## Note: Width is by default in %, if you want a column to
1629 ## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
1630 ## will be the column that take 10% of screen (so the real width
1631 ## will depend on actual screen size), whereas (10f)[white]{a}
1632 ## will take 10 terminal cells, no matter how wide the screen is.
1634 ## - color is optional (if you want the default one,
1635 ## leave the field empty).
1637 ## Note: You can give a column additional attributes by putting appropriate
1638 ## character after displayed tag character. Available attributes are:
1640 ## - r - column will be right aligned
1641 ## - E - if tag is empty, empty tag marker won't be displayed
1645 ## - give a column custom name by putting it after attributes,
1646 ## separated with character ':', e.g. {lr:Length} gives you
1647 ## right aligned column of lengths named "Length".
1649 ## - define sequence of tags, that have to be displayed in case
1650 ## predecessor is empty in a way similar to the one in classic
1651 ## song format, i.e. using '|' character, e.g. {a|c|p:Owner}
1652 ## creates column named "Owner" that tries to display artist
1653 ## tag and then composer and performer if previous ones are
1657 #song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
1659 ##### various settings #####
1662 ## Note: Custom command that will be executed each
1663 ## time song changes. Useful for notifications etc.
1665 #execute_on_song_change = ""
1667 #playlist_show_mpd_host = no
1669 #playlist_show_remaining_time = no
1671 #playlist_shorten_total_times = no
1673 #playlist_separate_albums = no
1676 ## Note: Possible display modes: classic, columns.
1678 #playlist_display_mode = columns
1680 #browser_display_mode = classic
1682 #search_engine_display_mode = classic
1684 #playlist_editor_display_mode = classic
1686 #discard_colors_if_item_is_selected = yes
1688 #incremental_seeking = yes
1692 #volume_change_step = 2
1694 #autocenter_mode = no
1696 #centered_cursor = no
1699 ## Note: You can specify third character which will
1700 ## be used to build 'empty' part of progressbar.
1702 #progressbar_look = =>
1703 progressbar_look = "─╼╶"
1704 #progressbar_look = "─⊙╶"
1706 #progressbar_boldness = yes
1708 ## Available values: database, playlist.
1710 #default_place_to_search_in = database
1712 ## Available values: classic, alternative.
1714 #user_interface = classic
1716 #data_fetching_delay = yes
1718 ## Available values: artist, album_artist, date, genre, composer, performer.
1720 #media_library_primary_tag = artist
1722 ## Available values: wrapped, normal.
1724 #default_find_mode = wrapped
1726 #default_tag_editor_pattern = %n - %t
1728 #header_visibility = yes
1730 #statusbar_visibility = yes
1732 #titles_visibility = yes
1734 #header_text_scrolling = yes
1736 #cyclic_scrolling = no
1740 #follow_now_playing_lyrics = no
1742 #fetch_lyrics_for_current_song_in_background = no
1744 #store_lyrics_in_song_dir = no
1746 #generate_win32_compatible_filenames = yes
1748 #allow_for_physical_item_deletion = no
1751 ## Note: If you set this variable, ncmpcpp will try to
1752 ## get info from last.fm in language you set and if it
1753 ## fails, it will fall back to english. Otherwise it will
1754 ## use english the first time.
1756 ## Note: Language has to be expressed as an ISO 639 alpha-2 code.
1758 #lastfm_preferred_language = en
1760 #show_hidden_files_in_local_browser = no
1763 ## How shall screen switcher work?
1765 ## - "previous" - switch between the current and previous screen.
1766 ## - "screen1,...,screenN" - switch between given sequence of screens.
1768 ## Screens available for use: help, playlist, browser, search_engine,
1769 ## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
1771 #screen_switcher_mode = playlist, browser
1774 ## Note: You can define startup screen
1775 ## by choosing screen from the list above.
1777 #startup_screen = playlist
1780 ## Note: You can define startup slave screen
1781 ## by choosing screen from the list above or
1782 ## an empty value for no slave screen.
1784 #startup_slave_screen = ""
1786 #startup_slave_screen_focus = no
1789 ## Default width of locked screen (in %).
1790 ## Acceptable values are from 20 to 80.
1793 #locked_screen_width_part = 50
1795 #ask_for_locked_screen_width_part = yes
1797 #jump_to_now_playing_song_at_start = yes
1799 #ask_before_clearing_playlists = yes
1801 #clock_display_seconds = no
1803 #display_volume_level = yes
1805 #display_bitrate = no
1807 #display_remaining_time = no
1809 ## Available values: none, basic, extended, perl.
1811 #regular_expressions = perl
1814 ## Note: If below is enabled, ncmpcpp will ignore leading
1815 ## "The" word while sorting items in browser, tags in
1816 ## media library, etc.
1818 #ignore_leading_the = no
1820 #block_search_constraints_change_if_items_found = yes
1822 #mouse_support = yes
1824 #mouse_list_scroll_whole_page = yes
1826 #empty_tag_marker = <empty>
1828 #tags_separator = " | "
1830 #tag_editor_extended_numeration = no
1832 #media_library_sort_by_mtime = no
1834 #enable_window_title = yes
1837 ## Note: You can choose default search mode for search
1838 ## engine. Available modes are:
1840 ## - 1 - use mpd built-in searching (no regexes, pattern matching)
1841 ## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
1842 ## but if your mpd is on a remote machine, downloading big database
1843 ## to process it can take a while
1844 ## - 3 - match only exact values (this mode uses mpd function for searching
1845 ## in database and local one for searching in current playlist)
1848 #search_engine_default_search_mode = 1
1850 #external_editor = nano
1852 ## Note: set to yes if external editor is a console application.
1854 #use_console_editor = yes
1856 ##### colors definitions #####
1858 ## It is possible to set a background color by setting a color
1859 ## value "<foreground>_<background>", e.g. red_black will set
1860 ## foregound color to red and background color to black.
1862 ## In addition, for terminals that support 256 colors it
1863 ## is possible to set one of them by using a number in range
1864 ## [1, 256] instead of color name, e.g. numerical value
1865 ## corresponding to red_black is 2_1. To find out if the
1866 ## terminal supports 256 colors, run ncmpcpp and check out
1867 ## the bottom of the help screen for list of available colors
1868 ## and their numerical values.
1870 ## Note: due to technical limitations of ncurses, if 256 colors
1871 ## are used, it is possible to either use only the colors with
1872 ## default background color, or all pairs from 1_1 up to 254_127,
1873 ## depending on the ncurses version used.
1876 #colors_enabled = yes
1878 #empty_tag_color = cyan
1880 #header_window_color = default
1882 #volume_color = default
1884 #state_line_color = default
1886 #state_flags_color = default
1888 #main_window_color = yellow
1894 #main_window_highlight_color = yellow
1896 #progressbar_color = black
1898 #progressbar_elapsed_color = green
1900 #statusbar_color = default
1902 #alternative_ui_separator_color = black
1904 #active_column_color = red
1906 #window_border_color = green
1908 #active_window_border = red
1914 :header-args+: :tangle ~/.ncmpcpp/bindings
1917 #+begin_src conf :tangle no
1942 move_sort_order_down
1951 :header-args+: :tangle ~/.notmuch-config
1955 # .notmuch-config - Configuration file for the notmuch mail system
1957 # For more information about notmuch, see https://notmuchmail.org
1959 # Database configuration
1961 # The only value supported here is 'path' which should be the top-level
1962 # directory where your mail currently exists and to where mail will be
1963 # delivered in the future. Files should be individual email messages.
1964 # Notmuch will store its database within a sub-directory of the path
1965 # configured here named ".notmuch".
1968 path=/home/amin/oldmail
1970 # User configuration
1972 # Here is where you can let notmuch know how you would like to be
1973 # addressed. Valid settings are
1975 # name Your full name.
1976 # primary_email Your primary email address.
1977 # other_email A list (separated by ';') of other email addresses
1978 # at which you receive email.
1980 # Notmuch will use the various email addresses configured here when
1981 # formatting replies. It will avoid including your own addresses in the
1982 # recipient list of replies, and will set the From address based on the
1983 # address to which the original email was addressed.
1987 primary_email=amin@aminb.org
1988 other_email=bandali@gnu.org;abandali@uwaterloo.ca;
1990 # Configuration for "notmuch new"
1992 # The following options are supported here:
1994 # tags A list (separated by ';') of the tags that will be
1995 # added to all messages incorporated by "notmuch new".
1997 # ignore A list (separated by ';') of file and directory names
1998 # that will not be searched for messages by "notmuch new".
2000 # NOTE: *Every* file/directory that goes by one of those
2001 # names will be ignored, independent of its depth/location
2002 # in the mail store.
2007 ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
2009 # Search configuration
2011 # The following option is supported here:
2014 # A ;-separated list of tags that will be excluded from
2015 # search results by default. Using an excluded tag in a
2016 # query will override that exclusion.
2019 exclude_tags=deleted;spam;
2021 # Maildir compatibility configuration
2023 # The following option is supported here:
2025 # synchronize_flags Valid values are true and false.
2027 # If true, then the following maildir flags (in message filenames)
2028 # will be synchronized with the corresponding notmuch tags:
2036 # S unread (added when 'S' flag is not present)
2038 # The "notmuch new" command will notice flag changes in filenames
2039 # and update tags, while the "notmuch tag" and "notmuch restore"
2040 # commands will notice tag changes and update flags in filenames
2043 synchronize_flags=true
2045 # Cryptography related configuration
2047 # The following option is supported here:
2050 # binary name or full path to invoke gpg.
2058 :header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
2062 touch /tmp/gnusieve.log
2063 sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
2064 -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
2069 :header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
2073 # apply sent tag to messages sent by me
2074 notmuch tag -new +sent -- from:amin@aminb.org or from:bandali@gnu.org or from:aminb@gnu.org or from:amin@gnu.org or from:mab@gnu.org or from:abandali@uwaterloo.ca
2077 notmuch tag -latest -- tag:latest
2078 notmuch tag +inbox +unread +latest -new -- tag:new
2081 # apply tags to lists
2084 notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
2085 notmuch tag -inbox +lists/haskell-weekly -- folder:amin/lists/haskell-weekly
2087 notmuch tag -inbox +pay -- folder:amin/pay
2088 notmuch tag -inbox +banking -- folder:amin/banking
2089 notmuch tag -inbox +work -- folder:amin/work
2093 notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
2094 notmuch tag -inbox +uw/cs846 -- folder:uwaterloo/lists/cs846
2095 notmuch tag -inbox +uw/ece750 -- folder:uwaterloo/lists/ece750
2096 notmuch tag -inbox +uw/se212 -- folder:uwaterloo/lists/se212
2097 notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
2099 notmuch tag -inbox +lists/alloytools -- folder:uwaterloo/lists/alloytools
2100 notmuch tag -inbox +lists/clvsingle -- folder:uwaterloo/lists/Clvsingle
2101 notmuch tag -inbox +lists/gsa -- folder:uwaterloo/lists/GSA
2102 notmuch tag -inbox +lists/math-grad -- folder:uwaterloo/lists/Math-grad
2103 notmuch tag -inbox +lists/scs-grads -- folder:uwaterloo/lists/scs-grads
2104 notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
2108 notmuch tag -inbox +l/emacs-devel -- folder:gnu/l/emacs-devel
2109 notmuch tag -inbox +l/emacs-orgmode -- folder:gnu/l/emacs-orgmode
2110 notmuch tag -inbox +l/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
2111 notmuch tag -inbox +l/fencepost-users -- folder:gnu/l/fencepost-users
2112 notmuch tag -inbox +l/guix-devel -- folder:gnu/l/guix-devel
2113 notmuch tag -inbox +l/guile-devel -- folder:gnu/l/guile-devel
2114 notmuch tag -inbox +l/help-gnu-emacs -- folder:gnu/l/help-gnu-emacs
2115 notmuch tag -inbox +l/info-gnu-emacs -- folder:gnu/l/info-gnu-emacs
2116 notmuch tag -inbox +l/www-commits -- folder:gnu/l/www-commits
2117 notmuch tag -inbox +l/www-discuss -- folder:gnu/l/www-discuss
2118 notmuch tag -inbox +webmasters -- folder:gnu/webmasters
2120 notmuch tag -inbox +l/deepspec -- folder:gnu/l/deepspec
2121 notmuch tag -inbox +l/haskell-cafe -- folder:gnu/l/haskell-cafe
2122 notmuch tag -inbox +l/haskell-art -- folder:gnu/l/haskell-art
2123 notmuch tag -inbox +l/notmuch -- folder:gnu/l/notmuch
2125 notmuch tag -inbox +l/~aminb/test-priv -- folder:gnu/l/~aminb/test-priv
2126 notmuch tag -inbox +l/~sircmpwn/sr.ht-admins -- folder:gnu/l/~sircmpwn/sr.ht-admins
2127 notmuch tag -inbox +l/~sircmpwn/sr.ht-announce -- folder:gnu/l/~sircmpwn/sr.ht-announce
2128 notmuch tag -inbox +l/~sircmpwn/sr.ht-dev -- folder:gnu/l/~sircmpwn/sr.ht-dev
2129 notmuch tag -inbox +l/~sircmpwn/sr.ht-discuss -- folder:gnu/l/~sircmpwn/sr.ht-discuss
2132 notmuch tag -inbox -unread +archive/notmuch -- path:archive/notmuch/**
2133 notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**
2138 :header-args+: :tangle ~/.config/systemd/user/notmuch.service
2141 #+begin_src conf :tangle no
2143 Description=notmuch service
2147 ExecStart=/usr/bin/notmuch new
2148 StandardOutput=syslog
2149 StandardError=syslog
2154 :header-args+: :tangle ~/.config/systemd/user/notmuch.timer
2157 #+begin_src conf :tangle no
2159 Description=notmuch timer
2164 Unit=notmuch.service
2167 WantedBy=timers.target
2173 :header-args+: :tangle ~/mail/aminb.org/amin/sieve/amin.sieve :comments none
2177 require ["regex", "variables", "fileinto", "envelope",
2178 "mailbox", "imap4flags", "include"];
2182 address :is "from" ["webmasters@gnu.org", "webmasters-comment@gnu.org"]) {
2183 fileinto :create "gnu.webmasters";
2187 include :personal "lists";
2192 :header-args+: :tangle ~/mail/aminb.org/amin/sieve/lists.sieve :comments none
2196 require ["regex", "variables", "fileinto", "envelope",
2197 "mailbox", "imap4flags", "include"];
2201 header :contains "list-id"
2202 [ "<emacs-devel.gnu.org>"
2203 , "<emacs-orgmode.gnu.org>"
2204 , "<emacsconf-discuss.gnu.org>"
2205 , "<fencepost-users.gnu.org>"
2206 , "<guix-devel.gnu.org>"
2207 , "<guile-devel.gnu.org>"
2208 , "<help-gnu-emacs.gnu.org>"
2209 , "<info-gnu-emacs.gnu.org>"
2210 , "<info-guix.gnu.org>"
2211 , "<www-commits.gnu.org>"
2212 , "<www-discuss.gnu.org>"
2213 , "<deepspec.lists.cs.princeton.edu>"
2214 , "<haskell-cafe.haskell.org>"
2215 , "<haskell-art.we.lurk.org>"
2216 , "<notmuch.notmuchmail.org>"
2218 if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
2219 set :lower "listname" "${1}";
2220 fileinto :create "gnu.${listname}";
2225 # sr.ht lists, with dots ('.') omitted
2227 header :contains "list-id"
2228 [ "<~bandali/public-inbox@lists.sr.ht>"
2229 , "<~sircmpwn/sr.ht-admins@lists.sr.ht>"
2230 , "<~sircmpwn/sr.ht-announce@lists.sr.ht>"
2231 , "<~sircmpwn/sr.ht-dev@lists.sr.ht>"
2232 , "<~sircmpwn/sr.ht-discuss@lists.sr.ht>"
2234 if header :regex "list-id" "(~[a-z_0-9-]+)/([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)@" {
2235 set :lower "username" "${1}";
2236 set :lower "listname" "${2}${3}${4}${5}${6}${7}";
2237 fileinto :create "gnu.${username}.${listname}";
2245 :header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
2250 Description=Powertop tunings
2253 ExecStart=/usr/bin/powertop --auto-tune
2254 RemainAfterExit=true
2257 WantedBy=multi-user.target
2262 :header-args+: :tangle ~/.config/redshift.conf :comments none
2266 ; Global settings for redshift
2268 ; Set the day and night screen temperatures (Neutral is 6500K)
2279 ; Enable/Disable a smooth transition between day and night
2280 ; 0 will cause a direct change from day to night screen temperature.
2281 ; 1 will gradually increase or decrease the screen temperature.
2284 ; Set the screen brightness. Default is 1.0.
2286 ; It is also possible to use different settings for day and night
2287 ; since version 1.8.
2289 ;brightness-night=0.4
2290 ; Set the screen gamma (for all colors, or each color channel
2295 ; This can also be set individually for day and night since
2297 ;gamma-day=0.8:0.7:0.8
2300 ; Set the location-provider: 'geoclue2' or 'manual'
2301 ; type 'redshift -l list' to see possible values.
2302 ; The location provider settings are in a different section.
2303 ;location-provider=manual
2304 location-provider=geoclue2
2306 ; Set the adjustment-method: 'randr', 'vidmode'
2307 ; type 'redshift -m list' to see all possible values.
2308 ; 'randr' is the preferred method, 'vidmode' is an older API.
2309 ; but works in some cases when 'randr' does not.
2310 ; The adjustment method settings are in a different section.
2311 adjustment-method=randr
2313 ; Configuration of the location-provider:
2314 ; type 'redshift -l PROVIDER:help' to see the settings.
2315 ; ex: 'redshift -l manual:help'
2316 ; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
2317 ; are negative numbers.
2322 ; Configuration of the adjustment-method
2323 ; type 'redshift -m METHOD:help' to see the settings.
2324 ; ex: 'redshift -m randr:help'
2325 ; In this example, randr is configured to adjust screen 1.
2326 ; Note that the numbering starts from 0, so this is actually the
2327 ; second screen. If this option is not specified, Redshift will try
2328 ; to adjust _all_ screens.
2335 :header-args+: :tangle ~/.config/rofi/config
2339 ! rofi.font: Ubuntu Mono 13
2340 ! rofi.font: Inconsolata 16
2341 ! rofi.font: Iosevka 13
2342 ! rofi.font: Source Code Pro 11
2343 rofi.font: Source Code Pro 10.5
2344 rofi.modi: run,window
2352 !rofi.theme: /usr/share/rofi/themes//Arc.rasi
2353 !rofi.theme: /usr/share/rofi/themes//Paper.rasi
2354 !rofi.theme: /usr/share/rofi/themes//sidebar.rasi
2356 rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
2361 :header-args+: :tangle ~/.config/rofi-pass/config
2365 # permanently set alternative root dir
2366 # root=/path/to/root
2368 # rofi command. Make sure to have "$@" as last argument
2370 #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
2371 rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
2374 # xdotool needs the keyboard layout to be set using setxkbmap
2375 # You can do this in your autostart scripts (e.g. xinitrc)
2377 # If for some reason, you cannot do this, you can set the command here.
2378 # and set fix_layout to true
2387 USERNAME_field='user'
2388 AUTOTYPE_field='autotype'
2390 # delay to be used for :delay keyword
2393 ## Programs to be used
2402 default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
2405 default_autotype='user :tab pass'
2407 # color of the help messages
2408 # leave empty for autodetection
2409 help_color="#4872FF"
2411 # Clipboard settings
2412 # Possible options: primary, clipboard, both
2415 # Options for generating new password entries
2416 # default_user is also used for password files that have no user field.
2418 default_user2=aminban
2421 # Custom Keybindings
2445 :header-args+: :tangle ~/.config/sway/config
2459 set $menu rofi -show run -display-run '> ' -display-window ' 🗔 '
2461 ### Output configuration
2463 # Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/)
2464 output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
2466 # Example configuration:
2468 # output HDMI-A-1 resolution 1920x1080 position 1920,0
2470 # You can get the names of your outputs by running: swaymsg -t get_outputs
2472 ### Idle configuration
2475 timeout 120 '[ -f ~/.nosleep ] || swaymsg "output * dpms off"' \
2476 resume '[ -f ~/.nosleep ] || swaymsg "output * dpms on"' \
2484 bindsym $mod+Return exec $term -name floating
2485 bindsym $mod+Shift+Return exec $term
2486 for_window [class="URxvt" instance="floating"] floating enable
2488 # kill focused window
2489 bindsym $mod+Shift+q kill
2491 # start your launcher
2492 bindsym $mod+d exec $menu
2495 bindsym $mod2+space exec rofi-pass
2497 # Drag floating windows by holding down $mod and left mouse button.
2498 # Resize them with right mouse button + $mod.
2499 # Despite the name, also works for non-floating windows.
2500 # Change normal to inverse to use left mouse button for resizing and right
2501 # mouse button for dragging.
2502 floating_modifier $mod normal
2504 # reload the configuration file
2505 bindsym $mod+Shift+c reload
2507 # exit sway (logs you out of your wayland session)
2508 # bindsym $mod+Shift+e exit
2510 bindsym $mod+apostrophe exec rofi-light # rofi-based brightness chooser
2511 bindsym XF86MonBrightnessUp exec light -A 5 # increase screen brightness
2512 bindsym XF86MonBrightnessDown exec light -U 5 # decrease screen brightness
2514 bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
2515 bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
2516 bindsym XF86AudioMute exec pamixer --toggle-mute
2517 bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
2519 bindsym $mod+Shift+apostrophe exec rofi-remmina.py # choose remmina connection
2521 # original sway workspace switch and window move
2522 bindsym $mod+bracketleft workspace prev
2523 bindsym $mod+bracketright workspace next
2524 bindsym $mod+braceleft move container to workspace prev
2525 bindsym $mod+braceright move container to workspace next
2527 # bspwm-esque workspace switch and window move
2528 bindsym $mod2+bracketleft exec sway-ws-util switch prev
2529 bindsym $mod2+bracketright exec sway-ws-util switch next
2530 bindsym $mod2+braceleft exec sway-ws-util move prev follow
2531 bindsym $mod2+braceright exec sway-ws-util move next follow
2535 # Move your focus around
2536 bindsym $mod+$left focus left
2537 bindsym $mod+$down focus down
2538 bindsym $mod+$up focus up
2539 bindsym $mod+$right focus right
2540 # or use $mod+[up|down|left|right]
2541 bindsym $mod+Left focus left
2542 bindsym $mod+Down focus down
2543 bindsym $mod+Up focus up
2544 bindsym $mod+Right focus right
2546 # _move_ the focused window with the same, but add Shift
2547 bindsym $mod+Shift+$left move left
2548 bindsym $mod+Shift+$down move down
2549 bindsym $mod+Shift+$up move up
2550 bindsym $mod+Shift+$right move right
2551 # ditto, with arrow keys
2552 bindsym $mod+Shift+Left move left
2553 bindsym $mod+Shift+Down move down
2554 bindsym $mod+Shift+Up move up
2555 bindsym $mod+Shift+Right move right
2559 # switch to workspace
2560 bindsym $mod+1 workspace 1
2561 bindsym $mod+2 workspace 2
2562 bindsym $mod+3 workspace 3
2563 bindsym $mod+4 workspace 4
2564 bindsym $mod+5 workspace 5
2565 bindsym $mod+6 workspace 6
2566 bindsym $mod+7 workspace 7
2567 bindsym $mod+8 workspace 8
2568 bindsym $mod+9 workspace 9
2569 bindsym $mod+0 workspace 10
2570 # move focused container to workspace
2571 bindsym $mod+Shift+1 move container to workspace 1
2572 bindsym $mod+Shift+2 move container to workspace 2
2573 bindsym $mod+Shift+3 move container to workspace 3
2574 bindsym $mod+Shift+4 move container to workspace 4
2575 bindsym $mod+Shift+5 move container to workspace 5
2576 bindsym $mod+Shift+6 move container to workspace 6
2577 bindsym $mod+Shift+7 move container to workspace 7
2578 bindsym $mod+Shift+8 move container to workspace 8
2579 bindsym $mod+Shift+9 move container to workspace 9
2580 bindsym $mod+Shift+0 move container to workspace 10
2581 # Note: workspaces can have any name you want, not just numbers.
2582 # We just use 1-10 as the default.
2586 # You can "split" the current object of your focus with
2587 # $mod+b or $mod+v, for horizontal and vertical splits
2589 bindsym $mod+b splith
2590 bindsym $mod+v splitv
2592 # Switch the current container between different layout styles
2593 bindsym $mod+s layout stacking
2594 bindsym $mod+w layout tabbed
2595 bindsym $mod+e layout toggle split
2597 # Make the current focus fullscreen
2598 bindsym $mod+f fullscreen
2600 # Toggle sticky-ness of the current (floating) window
2601 bindsym $mod+$mod2+space sticky toggle
2603 # Toggle the current focus between tiling and floating mode
2604 bindsym $mod+Shift+space floating toggle
2606 # Swap focus between the tiling area and the floating area
2607 bindsym $mod+space focus mode_toggle
2609 # move focus to the parent container
2610 bindsym $mod+a focus parent
2614 # Sway has a "scratchpad", which is a bag of holding for windows.
2615 # You can send windows there and get them back later.
2617 # Move the currently focused window to the scratchpad
2618 bindsym $mod+Shift+minus move scratchpad
2620 # Show the next scratchpad window or hide the focused scratchpad window.
2621 # If there are multiple scratchpad windows, this command cycles through them.
2622 bindsym $mod+minus scratchpad show
2624 # Resizing containers:
2627 # left will shrink the containers width
2628 # right will grow the containers width
2629 # up will shrink the containers height
2630 # down will grow the containers height
2631 bindsym $left resize shrink width 10px
2632 bindsym $down resize grow height 10px
2633 bindsym $up resize shrink height 10px
2634 bindsym $right resize grow width 10px
2636 # ditto, with arrow keys
2637 bindsym Left resize shrink width 10px
2638 bindsym Down resize grow height 10px
2639 bindsym Up resize shrink height 10px
2640 bindsym Right resize grow width 10px
2642 # return to default mode
2643 bindsym Return mode "default"
2644 bindsym Escape mode "default"
2646 bindsym $mod+Shift+r mode "resize"
2652 set $mode_system System (l)ock, (e)xit sway, (s)uspend, (h)ibernate, (r)eboot, (S)hutdown
2653 mode "$mode_system" {
2654 bindsym l exec swaylock, mode "default"
2655 bindsym e exec swaymsg exit, mode "default"
2656 bindsym s exec systemctl suspend, mode "default"
2657 bindsym h exec systemctl hibernate, mode "default"
2658 bindsym r exec systemctl reboot, mode "default"
2659 bindsym Shift+s exec systemctl poweroff -i, mode "default"
2661 # back to normal: Enter, Escape, or q
2662 bindsym Return mode "default"
2663 bindsym Escape mode "default"
2664 bindsym q mode "default"
2666 # bindsym XF86PowerOff mode "$mode_system"
2667 bindsym $mod+Shift+e mode "$mode_system"
2673 bindsym $mod+$mod2+p exec ([ ! -e ~/.nosleep ] && touch ~/.nosleep || rm ~/.nosleep) && killall -USR1 i3status
2679 bindsym $mod+Shift+n mode notifications
2680 mode notifications {
2681 bindsym Return exec makoctl invoke; exec makoctl dismiss; mode default
2682 bindsym d exec makoctl dismiss; mode default
2683 bindsym Shift+d exec makoctl dismiss -a; mode default
2685 bindsym Escape mode default
2686 bindsym q mode default
2693 bindsym $mod+Shift+s mode screenshot
2695 bindsym a exec grim $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
2696 bindsym r exec slurp | grim -g - $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
2698 bindsym Escape mode default
2699 bindsym q mode default
2703 # Window configurations
2705 for_window [class="mpv"] floating enable
2706 for_window [class="TelegramDesktop"] floating enable
2707 for_window [app_id="pavucontrol"] floating enable
2708 for_window [app_id="meld"] floating enable
2709 for_window [app_id="nm-connection-editor"] floating enable
2714 # Read `man 5 sway-bar` for more information about this section.
2720 inactive_workspace #21212100 #21212100 #5c5c5c
2722 status_command i3status | my-i3status.py
2725 # font pango: benis uushi 9
2726 # font pango: Ubuntu Mono 11
2727 # font pango: Inconsolata 11
2728 font pango: DejaVu Sans Mono 9
2729 # font pango: Liberation Mono 9
2731 exec xrdb .Xresources
2732 # exec pgrep -x "systemd-inhibit" || \
2733 # systemd-inhibit --what=handle-power-key --who=aminb \
2734 # --why="Handle power button in sway" sleep infinity
2735 exec mako 2>&1 >/tmp/mako.log
2736 exec /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
2738 include /etc/sway/config.d/*
2739 include ~/.config/sway/`hostname`
2741 exec systemd-notify --ready || true
2747 :header-args+: :tangle ~/.config/sway/langa
2751 input "2:7:SynPS/2_Synaptics_TouchPad" {
2755 natural_scroll enabled
2756 click_method clickfinger
2759 input "1:1:AT_Translated_Set_2_keyboard" {
2763 xkb_options ctrl:nocaps,altwin:swap_alt_win,grp:shifts_toggle
2769 :header-args+: :tangle ~/.config/sway/shemshak
2773 input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
2776 natural_scroll enabled
2777 middle_emulation enabled
2778 click_method clickfinger
2781 input "1:1:AT_Translated_Set_2_keyboard" {
2785 xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
2790 :header-args+: :tangle ~/.config/swaylock/config
2794 image=/home/amin/usr/pics/wp/wp2445784-blurred-wallpapers.jpg
2799 Keep boot messages on tty1 (see [[https://wiki.archlinux.org/index.php/getty#Have_boot_messages_stay_on_tty1][here]])
2801 #+begin_src conf :tangle /etc/systemd/system/getty@tty1.service.d/noclear.conf
2810 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "langa")) "/sudo::/etc/default/tlp")
2811 # ------------------------------------------------------------------------------
2812 # tlp - Parameters for power saving
2813 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
2815 # Hint: some features are disabled by default, remove the leading # to enable
2818 # Set to 0 to disable, 1 to enable TLP.
2821 # Operation mode when no power supply can be detected: AC, BAT.
2822 # Concerns some desktop and embedded hardware only.
2825 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
2826 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
2827 TLP_PERSISTENT_DEFAULT=0
2829 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
2830 # Non-zero value enables, zero disables laptop mode.
2831 DISK_IDLE_SECS_ON_AC=0
2832 DISK_IDLE_SECS_ON_BAT=2
2834 # Dirty page values (timeouts in secs).
2835 MAX_LOST_WORK_SECS_ON_AC=15
2836 MAX_LOST_WORK_SECS_ON_BAT=60
2838 # Hint: CPU parameters below are disabled by default, remove the leading #
2839 # to enable them, otherwise kernel default values are used.
2841 # Select a CPU frequency scaling governor.
2842 # Intel Core i processor with intel_pstate driver:
2843 # powersave(*), performance.
2844 # Older hardware with acpi-cpufreq driver:
2845 # ondemand(*), powersave, performance, conservative, schedutil.
2846 # (*) is recommended.
2847 # Hint: use tlp-stat -p to show the active driver and available governors.
2849 # powersave for intel_pstate and ondemand for acpi-cpufreq are power
2850 # efficient for *almost all* workloads and therefore kernel and most
2851 # distributions have chosen them as defaults. If you still want to change,
2852 # you should know what you're doing! You *must* disable your distribution's
2853 # governor settings or conflicts will occur.
2854 #CPU_SCALING_GOVERNOR_ON_AC=powersave
2855 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
2857 # Set the min/max frequency available for the scaling governor.
2858 # Possible values strongly depend on your CPU. For available frequencies see
2859 # the output of tlp-stat -p.
2860 #CPU_SCALING_MIN_FREQ_ON_AC=0
2861 #CPU_SCALING_MAX_FREQ_ON_AC=0
2862 #CPU_SCALING_MIN_FREQ_ON_BAT=0
2863 #CPU_SCALING_MAX_FREQ_ON_BAT=0
2865 # Set energy performance hints (HWP) for Intel P-state governor:
2866 # performance, balance_performance, default, balance_power, power
2867 # Values are given in order of increasing power saving.
2868 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
2869 CPU_HWP_ON_AC=balance_performance
2870 CPU_HWP_ON_BAT=balance_power
2872 # Set Intel P-state performance: 0..100 (%).
2873 # Limit the max/min P-state to control the power dissipation of the CPU.
2874 # Values are stated as a percentage of the available performance.
2875 # Requires an Intel Core i processor with intel_pstate driver.
2876 #CPU_MIN_PERF_ON_AC=0
2877 #CPU_MAX_PERF_ON_AC=100
2878 #CPU_MIN_PERF_ON_BAT=0
2879 #CPU_MAX_PERF_ON_BAT=30
2881 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
2882 # Requires an Intel Core i processor.
2884 # - This may conflict with your distribution's governor settings
2885 # - A value of 1 does *not* activate boosting, it just allows it
2889 # Minimize number of used CPU cores/hyper-threads under light load conditions:
2890 # 0=disable, 1=enable.
2891 SCHED_POWERSAVE_ON_AC=0
2892 SCHED_POWERSAVE_ON_BAT=1
2894 # Kernel NMI Watchdog:
2895 # 0=disable (default, saves power), 1=enable (for kernel debugging only).
2898 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
2899 # Frequency voltage pairs are written to:
2900 # /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
2901 # CAUTION: only use this, if you thoroughly understand what you are doing!
2902 #PHC_CONTROLS="F:V F:V F:V F:V"
2904 # Set CPU performance versus energy savings policy:
2905 # performance, balance-performance, default, balance-power, power.
2906 # Values are given in order of increasing power saving.
2907 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
2908 ENERGY_PERF_POLICY_ON_AC=performance
2909 ENERGY_PERF_POLICY_ON_BAT=balance-power
2911 # Disk devices; separate multiple devices with spaces (default: sda).
2912 # Devices can be specified by disk ID also (lookup with: tlp diskid).
2913 DISK_DEVICES="sda sdb"
2915 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
2916 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
2917 # Separate values for multiple disks with spaces. Use the special value 'keep'
2918 # to keep the hardware default for the particular disk.
2919 DISK_APM_LEVEL_ON_AC="254 254"
2920 DISK_APM_LEVEL_ON_BAT="128 128"
2922 # Hard disk spin down timeout:
2923 # 0: spin down disabled
2924 # 1..240: timeouts from 5s to 20min (in units of 5s)
2925 # 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
2926 # See 'man hdparm' for details.
2927 # Separate values for multiple disks with spaces. Use the special value 'keep'
2928 # to keep the hardware default for the particular disk.
2929 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
2930 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
2932 # Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
2933 # Separate values for multiple disks with spaces. Use the special value 'keep'
2934 # to keep the kernel default scheduler for the particular disk.
2935 #DISK_IOSCHED="cfq cfq"
2937 # AHCI link power management (ALPM) for disk devices:
2938 # min_power, med_power_with_dipm(*), medium_power, max_performance.
2939 # (*) Kernel >= 4.15 required, then recommended.
2940 # Multiple values separated with spaces are tried sequentially until success.
2941 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
2942 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
2944 # Exclude host devices from AHCI link power management.
2945 # Separate multiple hosts with spaces.
2946 #SATA_LINKPWR_BLACKLIST="host1"
2948 # Runtime Power Management for AHCI host and disks devices:
2949 # on=disable, auto=enable.
2950 # EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
2951 #AHCI_RUNTIME_PM_ON_AC=on
2952 #AHCI_RUNTIME_PM_ON_BAT=on
2954 # Seconds of inactivity before disk is suspended.
2955 AHCI_RUNTIME_PM_TIMEOUT=15
2957 # PCI Express Active State Power Management (PCIe ASPM):
2958 # default, performance, powersave.
2959 PCIE_ASPM_ON_AC=performance
2960 PCIE_ASPM_ON_BAT=powersave
2962 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
2963 # auto = mid on BAT, high on AC; default = use hardware defaults.
2964 RADEON_POWER_PROFILE_ON_AC=high
2965 RADEON_POWER_PROFILE_ON_BAT=low
2967 # Radeon dynamic power management method (DPM): battery, performance.
2968 RADEON_DPM_STATE_ON_AC=performance
2969 RADEON_DPM_STATE_ON_BAT=battery
2971 # Radeon DPM performance level: auto, low, high; auto is recommended.
2972 RADEON_DPM_PERF_LEVEL_ON_AC=auto
2973 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
2975 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
2979 # Disable wake on LAN: Y/N.
2982 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
2983 # A value of 0 disables, >=1 enables power saving (recommended: 1).
2984 SOUND_POWER_SAVE_ON_AC=0
2985 SOUND_POWER_SAVE_ON_BAT=0
2987 # Disable controller too (HDA only): Y/N.
2988 SOUND_POWER_SAVE_CONTROLLER=N
2990 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
2991 # Drive can be powered on again by releasing (and reinserting) the eject lever
2992 # or by pressing the disc eject button on newer models.
2993 # Note: an UltraBay/MediaBay hard disk is never powered off.
2994 BAY_POWEROFF_ON_AC=0
2995 BAY_POWEROFF_ON_BAT=0
2996 # Optical drive device to power off (default sr0).
2999 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
3001 RUNTIME_PM_ON_BAT=auto
3003 # Exclude PCI(e) device adresses the following list from Runtime PM
3004 # (separate with spaces). Use lspci to get the adresses (1st column).
3005 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
3007 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
3008 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
3009 # prevents accidential power-on of dGPU in hybrid graphics setups.
3010 # Use "" to disable the feature completely.
3011 # Separate multiple drivers with spaces.
3012 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
3014 # Set to 0 to disable, 1 to enable USB autosuspend feature.
3017 # Exclude listed devices from USB autosuspend (separate with spaces).
3018 # Use lsusb to get the ids.
3019 # Note: input devices (usbhid) are excluded automatically
3020 #USB_BLACKLIST="1111:2222 3333:4444"
3022 # Bluetooth devices are excluded from USB autosuspend:
3023 # 0=do not exclude, 1=exclude.
3024 USB_BLACKLIST_BTUSB=0
3026 # Phone devices are excluded from USB autosuspend:
3027 # 0=do not exclude, 1=exclude (enable charging).
3028 USB_BLACKLIST_PHONE=0
3030 # Printers are excluded from USB autosuspend:
3031 # 0=do not exclude, 1=exclude.
3032 USB_BLACKLIST_PRINTER=1
3034 # WWAN devices are excluded from USB autosuspend:
3035 # 0=do not exclude, 1=exclude.
3036 USB_BLACKLIST_WWAN=1
3038 # Include listed devices into USB autosuspend even if already excluded
3039 # by the blacklists above (separate with spaces).
3040 # Use lsusb to get the ids.
3041 #USB_WHITELIST="1111:2222 3333:4444"
3043 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
3044 # (workaround for USB devices that cause shutdown problems).
3045 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
3047 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
3048 # on system startup: 0=disable, 1=enable.
3049 # Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
3050 # are ignored when this is enabled!
3051 #RESTORE_DEVICE_STATE_ON_STARTUP=0
3052 RESTORE_DEVICE_STATE_ON_STARTUP=0
3054 # Radio devices to disable on startup: bluetooth, wifi, wwan.
3055 # Separate multiple devices with spaces.
3056 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
3057 DEVICES_TO_DISABLE_ON_STARTUP="bluetooth"
3059 # Radio devices to enable on startup: bluetooth, wifi, wwan.
3060 # Separate multiple devices with spaces.
3061 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
3063 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
3064 # (workaround for devices that are blocking shutdown).
3065 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
3067 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
3068 # (to prevent other operating systems from missing radios).
3069 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
3071 # Radio devices to enable on AC: bluetooth, wifi, wwan.
3072 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
3074 # Radio devices to disable on battery: bluetooth, wifi, wwan.
3075 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
3077 # Radio devices to disable on battery when not in use (not connected):
3078 # bluetooth, wifi, wwan.
3079 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
3081 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
3082 # required). Charging starts when the remaining capacity falls below the
3083 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
3084 # Main / Internal battery (values in %)
3085 #START_CHARGE_THRESH_BAT0=75
3086 #STOP_CHARGE_THRESH_BAT0=80
3087 # Ultrabay / Slice / Replaceable battery (values in %)
3088 #START_CHARGE_THRESH_BAT1=75
3089 #STOP_CHARGE_THRESH_BAT1=80
3091 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
3092 #RESTORE_THRESHOLDS_ON_BAT=1
3094 # ------------------------------------------------------------------------------
3095 # tlp-rdw - Parameters for the radio device wizard
3096 # Possible devices: bluetooth, wifi, wwan.
3099 # - Parameters are disabled by default, remove the leading # to enable them
3100 # - Separate multiple radio devices with spaces
3102 # Radio devices to disable on connect.
3103 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
3104 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
3105 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
3107 # Radio devices to enable on disconnect.
3108 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
3109 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
3110 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
3112 # Radio devices to enable/disable when docked.
3113 #DEVICES_TO_ENABLE_ON_DOCK=""
3114 #DEVICES_TO_DISABLE_ON_DOCK=""
3116 # Radio devices to enable/disable when undocked.
3117 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
3118 #DEVICES_TO_DISABLE_ON_UNDOCK=""
3123 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "shemshak")) "/sudo::/etc/default/tlp")
3124 # ------------------------------------------------------------------------------
3125 # tlp - Parameters for power saving
3126 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
3128 # Hint: some features are disabled by default, remove the leading # to enable
3131 # Set to 0 to disable, 1 to enable TLP.
3134 # Operation mode when no power supply can be detected: AC, BAT.
3135 # Concerns some desktop and embedded hardware only.
3138 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
3139 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
3140 TLP_PERSISTENT_DEFAULT=0
3142 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
3143 # Non-zero value enables, zero disables laptop mode.
3144 DISK_IDLE_SECS_ON_AC=0
3145 DISK_IDLE_SECS_ON_BAT=2
3147 # Dirty page values (timeouts in secs).
3148 MAX_LOST_WORK_SECS_ON_AC=15
3149 MAX_LOST_WORK_SECS_ON_BAT=60
3151 # Hint: CPU parameters below are disabled by default, remove the leading #
3152 # to enable them, otherwise kernel default values are used.
3154 # Select a CPU frequency scaling governor.
3155 # Intel Core i processor with intel_pstate driver:
3156 # powersave(*), performance.
3157 # Older hardware with acpi-cpufreq driver:
3158 # ondemand(*), powersave, performance, conservative, schedutil.
3159 # (*) is recommended.
3160 # Hint: use tlp-stat -p to show the active driver and available governors.
3162 # powersave for intel_pstate and ondemand for acpi-cpufreq are power
3163 # efficient for *almost all* workloads and therefore kernel and most
3164 # distributions have chosen them as defaults. If you still want to change,
3165 # you should know what you're doing! You *must* disable your distribution's
3166 # governor settings or conflicts will occur.
3167 #CPU_SCALING_GOVERNOR_ON_AC=powersave
3168 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
3170 # Set the min/max frequency available for the scaling governor.
3171 # Possible values strongly depend on your CPU. For available frequencies see
3172 # the output of tlp-stat -p.
3173 #CPU_SCALING_MIN_FREQ_ON_AC=0
3174 #CPU_SCALING_MAX_FREQ_ON_AC=0
3175 #CPU_SCALING_MIN_FREQ_ON_BAT=0
3176 #CPU_SCALING_MAX_FREQ_ON_BAT=0
3178 # Set energy performance hints (HWP) for Intel P-state governor:
3179 # performance, balance_performance, default, balance_power, power
3180 # Values are given in order of increasing power saving.
3181 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
3182 CPU_HWP_ON_AC=balance_performance
3183 CPU_HWP_ON_BAT=balance_power
3185 # Set Intel P-state performance: 0..100 (%).
3186 # Limit the max/min P-state to control the power dissipation of the CPU.
3187 # Values are stated as a percentage of the available performance.
3188 # Requires an Intel Core i processor with intel_pstate driver.
3189 #CPU_MIN_PERF_ON_AC=0
3190 #CPU_MAX_PERF_ON_AC=100
3191 #CPU_MIN_PERF_ON_BAT=0
3192 #CPU_MAX_PERF_ON_BAT=30
3194 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
3195 # Requires an Intel Core i processor.
3197 # - This may conflict with your distribution's governor settings
3198 # - A value of 1 does *not* activate boosting, it just allows it
3202 # Minimize number of used CPU cores/hyper-threads under light load conditions:
3203 # 0=disable, 1=enable.
3204 SCHED_POWERSAVE_ON_AC=0
3205 SCHED_POWERSAVE_ON_BAT=1
3207 # Kernel NMI Watchdog:
3208 # 0=disable (default, saves power), 1=enable (for kernel debugging only).
3211 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
3212 # Frequency voltage pairs are written to:
3213 # /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
3214 # CAUTION: only use this, if you thoroughly understand what you are doing!
3215 #PHC_CONTROLS="F:V F:V F:V F:V"
3217 # Set CPU performance versus energy savings policy:
3218 # performance, balance-performance, default, balance-power, power.
3219 # Values are given in order of increasing power saving.
3220 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
3221 ENERGY_PERF_POLICY_ON_AC=performance
3222 ENERGY_PERF_POLICY_ON_BAT=balance-power
3224 # Disk devices; separate multiple devices with spaces (default: sda).
3225 # Devices can be specified by disk ID also (lookup with: tlp diskid).
3226 DISK_DEVICES="sda sdb"
3228 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
3229 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
3230 # Separate values for multiple disks with spaces. Use the special value 'keep'
3231 # to keep the hardware default for the particular disk.
3232 DISK_APM_LEVEL_ON_AC="254 254"
3233 DISK_APM_LEVEL_ON_BAT="128 128"
3235 # Hard disk spin down timeout:
3236 # 0: spin down disabled
3237 # 1..240: timeouts from 5s to 20min (in units of 5s)
3238 # 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
3239 # See 'man hdparm' for details.
3240 # Separate values for multiple disks with spaces. Use the special value 'keep'
3241 # to keep the hardware default for the particular disk.
3242 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
3243 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
3245 # Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
3246 # Separate values for multiple disks with spaces. Use the special value 'keep'
3247 # to keep the kernel default scheduler for the particular disk.
3248 #DISK_IOSCHED="cfq cfq"
3250 # AHCI link power management (ALPM) for disk devices:
3251 # min_power, med_power_with_dipm(*), medium_power, max_performance.
3252 # (*) Kernel >= 4.15 required, then recommended.
3253 # Multiple values separated with spaces are tried sequentially until success.
3254 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
3255 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
3257 # Exclude host devices from AHCI link power management.
3258 # Separate multiple hosts with spaces.
3259 #SATA_LINKPWR_BLACKLIST="host1"
3261 # Runtime Power Management for AHCI host and disks devices:
3262 # on=disable, auto=enable.
3263 # EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
3264 #AHCI_RUNTIME_PM_ON_AC=on
3265 #AHCI_RUNTIME_PM_ON_BAT=on
3267 # Seconds of inactivity before disk is suspended.
3268 AHCI_RUNTIME_PM_TIMEOUT=15
3270 # PCI Express Active State Power Management (PCIe ASPM):
3271 # default, performance, powersave.
3272 PCIE_ASPM_ON_AC=performance
3273 PCIE_ASPM_ON_BAT=powersave
3275 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
3276 # auto = mid on BAT, high on AC; default = use hardware defaults.
3277 RADEON_POWER_PROFILE_ON_AC=high
3278 RADEON_POWER_PROFILE_ON_BAT=low
3280 # Radeon dynamic power management method (DPM): battery, performance.
3281 RADEON_DPM_STATE_ON_AC=performance
3282 RADEON_DPM_STATE_ON_BAT=battery
3284 # Radeon DPM performance level: auto, low, high; auto is recommended.
3285 RADEON_DPM_PERF_LEVEL_ON_AC=auto
3286 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
3288 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
3292 # Disable wake on LAN: Y/N.
3295 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
3296 # A value of 0 disables, >=1 enables power saving (recommended: 1).
3297 SOUND_POWER_SAVE_ON_AC=0
3298 SOUND_POWER_SAVE_ON_BAT=0
3300 # Disable controller too (HDA only): Y/N.
3301 SOUND_POWER_SAVE_CONTROLLER=N
3303 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
3304 # Drive can be powered on again by releasing (and reinserting) the eject lever
3305 # or by pressing the disc eject button on newer models.
3306 # Note: an UltraBay/MediaBay hard disk is never powered off.
3307 BAY_POWEROFF_ON_AC=0
3308 BAY_POWEROFF_ON_BAT=0
3309 # Optical drive device to power off (default sr0).
3312 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
3314 RUNTIME_PM_ON_BAT=auto
3316 # Exclude PCI(e) device adresses the following list from Runtime PM
3317 # (separate with spaces). Use lspci to get the adresses (1st column).
3318 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
3319 RUNTIME_PM_BLACKLIST="01:00.0"
3321 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
3322 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
3323 # prevents accidential power-on of dGPU in hybrid graphics setups.
3324 # Use "" to disable the feature completely.
3325 # Separate multiple drivers with spaces.
3326 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
3328 # Set to 0 to disable, 1 to enable USB autosuspend feature.
3331 # Exclude listed devices from USB autosuspend (separate with spaces).
3332 # Use lsusb to get the ids.
3333 # Note: input devices (usbhid) are excluded automatically
3334 #USB_BLACKLIST="1111:2222 3333:4444"
3336 # Bluetooth devices are excluded from USB autosuspend:
3337 # 0=do not exclude, 1=exclude.
3338 USB_BLACKLIST_BTUSB=0
3340 # Phone devices are excluded from USB autosuspend:
3341 # 0=do not exclude, 1=exclude (enable charging).
3342 USB_BLACKLIST_PHONE=0
3344 # Printers are excluded from USB autosuspend:
3345 # 0=do not exclude, 1=exclude.
3346 USB_BLACKLIST_PRINTER=1
3348 # WWAN devices are excluded from USB autosuspend:
3349 # 0=do not exclude, 1=exclude.
3350 USB_BLACKLIST_WWAN=1
3352 # Include listed devices into USB autosuspend even if already excluded
3353 # by the blacklists above (separate with spaces).
3354 # Use lsusb to get the ids.
3355 #USB_WHITELIST="1111:2222 3333:4444"
3357 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
3358 # (workaround for USB devices that cause shutdown problems).
3359 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
3361 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
3362 # on system startup: 0=disable, 1=enable.
3363 # Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
3364 # are ignored when this is enabled!
3365 #RESTORE_DEVICE_STATE_ON_STARTUP=0
3366 RESTORE_DEVICE_STATE_ON_STARTUP=1
3368 # Radio devices to disable on startup: bluetooth, wifi, wwan.
3369 # Separate multiple devices with spaces.
3370 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
3372 # Radio devices to enable on startup: bluetooth, wifi, wwan.
3373 # Separate multiple devices with spaces.
3374 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
3376 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
3377 # (workaround for devices that are blocking shutdown).
3378 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
3380 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
3381 # (to prevent other operating systems from missing radios).
3382 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
3384 # Radio devices to enable on AC: bluetooth, wifi, wwan.
3385 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
3387 # Radio devices to disable on battery: bluetooth, wifi, wwan.
3388 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
3390 # Radio devices to disable on battery when not in use (not connected):
3391 # bluetooth, wifi, wwan.
3392 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
3394 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
3395 # required). Charging starts when the remaining capacity falls below the
3396 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
3397 # Main / Internal battery (values in %)
3398 #START_CHARGE_THRESH_BAT0=75
3399 #STOP_CHARGE_THRESH_BAT0=80
3400 # Ultrabay / Slice / Replaceable battery (values in %)
3401 #START_CHARGE_THRESH_BAT1=75
3402 #STOP_CHARGE_THRESH_BAT1=80
3404 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
3405 #RESTORE_THRESHOLDS_ON_BAT=1
3407 # ------------------------------------------------------------------------------
3408 # tlp-rdw - Parameters for the radio device wizard
3409 # Possible devices: bluetooth, wifi, wwan.
3412 # - Parameters are disabled by default, remove the leading # to enable them
3413 # - Separate multiple radio devices with spaces
3415 # Radio devices to disable on connect.
3416 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
3417 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
3418 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
3420 # Radio devices to enable on disconnect.
3421 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
3422 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
3423 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
3425 # Radio devices to enable/disable when docked.
3426 #DEVICES_TO_ENABLE_ON_DOCK=""
3427 #DEVICES_TO_DISABLE_ON_DOCK=""
3429 # Radio devices to enable/disable when undocked.
3430 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
3431 #DEVICES_TO_DISABLE_ON_UNDOCK=""
3438 :header-args+: :tangle ~/.xprofile
3441 =~/.xprofile= is similar in style to =~/.xinitrc=, but on the
3442 contrary, it's automatically sourced by LightDM, my display manager of
3445 #+begin_src sh :tangle no
3446 xset -b # disable bell
3447 xset r rate 200 45 # repeat delay (ms) and rate (repeats/sec)
3449 # setxkbmap -option compose:ralt
3451 setxkbmap -option ctrl:nocaps # turn capslock into control
3452 setxkbmap -option altwin:swap_alt_win # swap alt and super
3454 if [ $(hostname) = "plasma" ]
3456 setxkbmap -option ctrl:rctrl_ralt # turn right control into right alt
3459 if [ $(hostname) = "enigma" ]
3461 xmodmap -e "keycode 135 = Alt_R" # remap menu key to alt
3464 light -Scrs "intel_backlight" 2
3466 source $HOME/.zprofile
3468 export _JAVA_AWT_WM_NONREPARENTING=1
3469 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
3471 if [ $(hostname) = "plasma" ]
3483 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
3486 #+begin_src conf-xdefaults
3487 #include ".Xresources.d/fonts"
3488 ! #include ".Xresources.d/colors"
3489 #include ".Xresources.d/emacs"
3490 #include ".Xresources.d/rxvt-unicode"
3497 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
3500 #+begin_src conf-xdefaults
3501 Xft.lcdfilter: lcddefault
3505 Xft.hintstyle: hintslight
3506 ! Xft.hintstyle: hintfull
3513 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
3516 #+begin_src conf-xdefaults :tangle no
3517 #include "gruvbox-light.xresources"
3518 ! #include "gruvbox-dark.xresources"
3519 #include "gruvbox-urxvt256.xresources"
3522 #+begin_src conf-xdefaults :tangle no
3523 ! -----------------------------------------------------------------------------
3524 ! File: gruvbox-light.xresources
3525 ! Description: Retro groove colorscheme generalized
3526 ! Author: morhetz <morhetz@gmail.com>
3527 ! Source: https://github.com/morhetz/gruvbox-generalized
3528 ! Last Modified: 6 Sep 2014
3529 ! -----------------------------------------------------------------------------
3531 ! hard contrast: *background: #f9f5d7
3532 *background: #fbf1c7
3533 ! soft contrast: *background: #f2e5bc
3534 *foreground: #3c3836
3544 ! DarkYellow + Yellow
3550 ! DarkMagenta + Magenta
3561 #+begin_src conf-xdefaults :tangle no
3562 ! -----------------------------------------------------------------------------
3563 ! File: gruvbox-dark.xresources
3564 ! Description: Retro groove colorscheme generalized
3565 ! Author: morhetz <morhetz@gmail.com>
3566 ! Source: https://github.com/morhetz/gruvbox-generalized
3567 ! Last Modified: 6 Sep 2014
3568 ! -----------------------------------------------------------------------------
3570 ! hard contrast: *background: #1d2021
3571 *background: #282828
3572 ! soft contrast: *background: #32302f
3573 *foreground: #ebdbb2
3583 ! DarkYellow + Yellow
3589 ! DarkMagenta + Magenta
3600 #+begin_src conf-xdefaults :tangle no
3601 ! -----------------------------------------------------------------------------
3602 ! File: gruvbox-urxvt256.xresources
3603 ! Description: Retro groove colorscheme generalized
3604 ! Author: morhetz <morhetz@gmail.com>
3605 ! Source: https://github.com/morhetz/gruvbox-generalized
3606 ! Last Modified: 13 Dec 2013
3607 ! -----------------------------------------------------------------------------
3609 URxvt.color24: #076678
3610 URxvt.color66: #427b58
3611 URxvt.color88: #9d0006
3612 URxvt.color96: #8f3f71
3613 URxvt.color100: #79740e
3614 URxvt.color108: #8ec07c
3615 URxvt.color109: #83a598
3616 URxvt.color130: #af3a03
3617 URxvt.color136: #b57614
3618 URxvt.color142: #b8bb26
3619 URxvt.color167: #fb4934
3620 URxvt.color175: #d3869b
3621 URxvt.color208: #fe8019
3622 URxvt.color214: #fabd2f
3623 URxvt.color223: #ebdbb2
3624 URxvt.color228: #f2e5bc
3625 URxvt.color229: #fbf1c7
3626 URxvt.color230: #f9f5d7
3627 URxvt.color234: #1d2021
3628 URxvt.color235: #282828
3629 URxvt.color236: #32302f
3630 URxvt.color237: #3c3836
3631 URxvt.color239: #504945
3632 URxvt.color241: #665c54
3633 URxvt.color243: #7c6f64
3634 URxvt.color244: #928374
3635 URxvt.color245: #928374
3636 URxvt.color246: #a89984
3637 URxvt.color248: #bdae93
3638 URxvt.color250: #d5c4a1
3643 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
3646 #+begin_src conf-xdefaults
3649 Emacs.verticalScrollBars: off
3650 Emacs.cursorBlink: off
3651 Emacs.FontBackend: xft,x
3652 ! Emacs.font: Ubuntu Mono-12
3653 ! Emacs.font: Triplicate T4C-11
3654 ! Emacs.font: Ubuntu Mono-10.5
3655 ! Emacs.font: Ubuntu Mono-12
3656 ! Emacs.font: Iosevka-11
3658 ! Emacs.font: Fira Mono:size=15
3659 ! Emacs.font: DejaVu Sans Mono:size=15
3660 ! Emacs.font: Inconsolata:size=17
3661 ! Emacs.font: Inconsolata:size=16
3662 ! Emacs.font: Inconsolata LGC:size=14
3663 ! Emacs.font: Source Code Pro Medium-10.5
3664 Emacs.font: Source Code Pro:size=14
3665 ! Emacs.font: Ubuntu Mono:size=16
3666 ! Emacs.font: Iosevka:size=16
3671 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
3674 #+begin_src conf-xdefaults
3676 URxvt.font: xft:source code pro:pixelsize=14:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
3677 URxvt.boldFont: xft:source code pro:semibold:pixelsize=14:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
3678 URxvt.italicFont: xft:source code pro:italic:pixelsize=14:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
3679 URxvt.bolditalicFont: xft:source code pro:semibold:italic:pixelsize=14:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
3681 URxvt.xftAntialias: true
3682 URxvt.letterSpace: 0
3685 URxvt.loginShell: true
3686 URxvt.saveLines: 100000
3687 URxvt.internalBorder: 3
3689 URxvt.scrollBar: false
3690 URxvt.scrollStyle: rxvt
3691 URxvt*scrollTtyOutput: false
3692 URxvt*scrollWithBuffer: true
3693 URxvt*scrollTtyKeypress: true
3694 URxvt.keysym.Shift-Up: command:\033]720;1\007
3695 URxvt.keysym.Shift-Down: command:\033]721;1\007
3697 URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select
3698 URxvt.url-select.launcher: firefox
3699 URxvt.url-select.underline: true
3700 URxvt.keysym.M-u: perl:url-select:select_next
3701 URxvt.keysym.M-Escape: perl:keyboard-select:activate
3702 URxvt.keysym.M-s: perl:keyboard-select:search
3703 URxvt.url-launcher: /usr/bin/firefox
3704 URxvt.matcher.button: 1
3705 URxvt.iso14755: false
3706 URxvt.iso14755_53: false
3707 URxvt.keysym.M-c: perl:clipboard:copy
3708 URxvt.keysym.M-v: perl:clipboard:paste
3709 URxvt.keysym.C-A-V: perl:clipboard:paste_escaped
3710 URxvt.keysym.C-Up: font-size:increase
3711 URxvt.keysym.C-Down: font-size:decrease
3712 URxvt.keysym.C-S-Up: font-size:incglobal
3713 URxvt.keysym.C-S-Down: font-size:decglobal
3714 URxvt.keysym.C-equal: font-size:reset
3715 !URxvt.keysym.C-question: font-size:show
3717 URxvt.iconFile: /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
3719 !urxvt*foreground: white
3720 !urxvt*background: black
3739 !URxvt.foreground: #C8C8C8
3740 !URxvt.background: #FFFFFF
3760 !! orange (replaces cyan)
3767 ! Tango colour theme for rxvt-unicode
3768 URxvt.background: #FFFFFF
3769 URxvt.foreground: #000000
3772 URxvt.color0: #2E3436
3773 URxvt.color8: #757773
3776 URxvt.color1: #CC0000
3777 URxvt.color9: #EF2929
3780 URxvt.color2: #4E9A06
3781 URxvt.color10: #8AE234
3784 URxvt.color3: #C4A000
3785 URxvt.color11: #FCE94F
3788 URxvt.color4: #3465A4
3789 URxvt.color12: #729FCF
3792 URxvt.color5: #75507B
3793 URxvt.color13: #AD7FA8
3796 !URxvt.color6: #06989A
3797 !URxvt.color14: #34E2E2
3798 ! orange (replaces cyan)
3803 URxvt.color7: #D3D7CF
3804 URxvt.color15: #EEEEEC
3807 *** xkb us_ab keyboard layout
3809 #+begin_src conf :tangle "/sudo::/usr/share/X11/xkb/symbols/us_ab" :comments none
3810 default partial alphanumeric_keys
3811 xkb_symbols "us_ab" {
3813 name[Group1]= "English (US)(aminb)";
3815 key <MENU> { [ Alt_R ] };
3821 :header-args+: :tangle ~/.config/user-dirs.dirs
3825 XDG_DESKTOP_DIR="$HOME/Desktop"
3826 XDG_DOCUMENTS_DIR="$HOME/usr/docs"
3827 XDG_DOWNLOAD_DIR="$HOME/usr/dls"
3828 XDG_MUSIC_DIR="$HOME/usr/music"
3829 XDG_PICTURES_DIR="$HOME/usr/pics"
3830 XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
3831 XDG_TEMPLATES_DIR="$HOME/usr/Templates"
3832 XDG_VIDEOS_DIR="$HOME/usr/vids"
3837 :header-args+: :tangle ~/.config/zathura/zathurarc
3841 set smooth-scroll true
3842 set selection-clipboard clipboard
3844 set default-bg "#272727"
3845 set statusbar-bg "#272727"
3846 set inputbar-bg "#373737"
3851 My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
3852 [[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
3857 :header-args+: :tangle ~/.zimrc
3869 # Select what modules you would like enabled.
3870 # The second line of modules may depend on options set by modules in the first
3871 # line. These dependencies are noted on the respective module's README.md.
3872 zmodules=(directory environment git git-info history input ssh utility custom \
3873 syntax-highlighting history-substring-search prompt completion)
3884 # Set your desired prompt here
3885 zprompt_theme='pure'
3886 #PURE_PROMPT_SYMBOL=λ
3887 #PURE_PROMPT_SYMBOL=δ
3888 PURE_PROMPT_SYMBOL=➜
3894 # set an optional host-specific filename for the completion cache file
3895 # if none is provided, the default '.zcompdump' is used.
3896 #zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
3902 # Uncomment to enable command correction prompts
3903 # See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
3910 # Set the string below to the desired terminal title format string.
3911 # The terminal title is redrawn upon directory change, however, variables like
3912 # ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
3913 # http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
3914 # The example below uses the following format: 'username@host:/current/directory'
3915 ztermtitle='%n@%m:%~'
3921 # Uncomment to enable double-dot expansion.
3922 # This appends '../' to your input for each '.' you type after an initial '..'
3923 #zdouble_dot_expand='true'
3926 # Syntax-Highlighting
3929 # This determines what highlighters will be used with the syntax-highlighting module.
3930 # Documentation of the highlighters can be found here:
3931 # https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
3932 # For (u)rxvt, termite and gnome-terminal users,
3933 # removing the 'cursor' highlighter will fix the disappearing cursor problem
3934 #zhighlighters=(main brackets cursor)
3935 zhighlighters=(main brackets pattern)
3941 # Load these ssh identities with the ssh module
3942 zssh_ids=(id_ed25519_bandali)
3948 # Set (optional) pacman front-end.
3949 zpacman_frontend='yay'
3951 # Load any helper scripts as defined here
3952 #zpacman_helper=(aur)
3959 :header-args+: :tangle ~/.zlogin
3964 # User configuration sourced by login shells
3968 [[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
3974 :header-args+: :tangle ~/.zprofile
3978 #PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
3979 #PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
3980 export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
3981 export XDG_CONFIG_HOME=$HOME/.config
3982 export XDG_DATA_HOME=$HOME/.local/share
3983 export XDG_DATA_DIRS=/usr/local/share:/usr/share
3984 export MAILDIR="$HOME/mail"
3986 #export MATHMODELS=$HOME/src/eiffel/mathmodels
3987 #export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
3988 #export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
3991 #export JAVA_HOME=/usr/lib/jvm/default
3992 #export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
3993 #export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
3994 #export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
3996 #export PATH="$HOME/usr/build/pvs:$PATH"
3997 #export SBCLISP_HOME=/usr/share/sbcl-source
3998 #export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
4000 export MOZ_USE_XINPUT2=1 # precise scrolling in firefox
4002 #export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
4003 #export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
4005 export NIXPKGS=$HOME/src/git/nixpkgs
4007 if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
4009 export GUIX_LOCPATH="$HOME/.guix-profile/lib/locale"
4010 export PATH="/$HOME/.config/guix/current/bin${PATH:+:}$PATH"
4011 export SSL_CERT_DIR="$HOME/.guix-profile/etc/ssl/certs"
4012 export SSL_CERT_FILE="$HOME/.guix-profile/etc/ssl/certs/ca-certificates.crt"
4013 export GIT_SSL_CAINFO="$SSL_CERT_FILE"
4018 :header-args+: :tangle ~/.zshenv
4022 # Ensure that a non-login, non-interactive shell has a defined environment.
4023 if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
4024 source "${ZDOTDIR:-$HOME}/.zprofile"
4030 :header-args+: :tangle ~/.zshrc
4034 # Bash-like navigation
4035 #export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
4036 #export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
4037 export WORDCHARS='*?[]~=&;!#$%^(){}<>'
4038 #ZLE_SPACE_SUFFIX_CHARS=$'|&'
4040 #disable -r time # disable shell reserved word
4041 #alias time='time -p' # -p for POSIX output
4043 # rehash if last command was pacaur or pacman
4044 # (so that zsh picks up changes in $PATH immediately)
4045 TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
4048 # User configuration sourced by interactive shells
4051 # Define zim location
4052 export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
4055 [[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
4057 ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
4058 #ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
4062 source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
4063 # source ~/.zsh/zsh-autopair/autopair.zsh
4068 source /usr/share/fzf/key-bindings.zsh
4069 source /usr/share/fzf/completion.zsh
4071 # Accept history selection instead of putting it on
4073 fzf-history-widget-accept() {
4077 #zle -N fzf-history-widget-accept
4078 #bindkey '^R' fzf-history-widget-accept
4081 export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
4087 alias mpv="mpv --ytdl-format mp4"
4091 alias jcl=journalctl
4092 alias m="mbsync uwaterloo; mbsync amin"
4093 alias best="youtube-dl -f best"
4100 git clone https://aur.archlinux.org/${1}.git
4112 This section contains various useful scripts and the ones used by the
4113 programs above. For instance, =toggle-tablet= for switching to and
4114 from tablet mode on my X220T, =toggle-presentation-mode= for toggling
4115 Xfce's presentation mode which keeps the screen awake, and
4116 =rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
4117 exact brightness value.
4119 ** battery-percentage-time
4121 :header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/sh"
4124 #+begin_src sh :tangle no
4127 dbus-send --print-reply=literal --system \
4128 --dest=org.freedesktop.UPower \
4129 /org/freedesktop/UPower/devices/battery_BAT0 \
4130 org.freedesktop.DBus.Properties.Get \
4131 string:org.freedesktop.UPower.Device \
4132 string:"${label}" | awk '{print $3}'
4135 perc=$(dbus_send 'Percentage')
4136 state=$(dbus_send 'State')
4138 if [ "$state" -eq 2 ]; then # Discharging
4139 secs=$(dbus_send 'TimeToEmpty')
4140 elif [ "$state" -eq 1 ]; then # Charging
4141 secs=$(dbus_send 'TimeToFull')
4144 printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60))
4149 :header-args+: :tangle ~/.local/bin/my-i3status.py :shebang "#!/usr/bin/env python2"
4152 #+begin_src python :comments none
4153 # -*- coding: utf-8 -*-
4155 # This script is a simple wrapper which prefixes each i3status line with custom
4156 # information. It is based on:
4157 # https://github.com/i3/i3status/blob/master/contrib/wrapper.py
4159 # In ~/.i3status.conf, add the following line:
4160 # output_format = "i3bar"
4161 # in the 'general' section.
4162 # Then, in ~/.config/i3/config or ~/.config/sway/config add:
4163 # status_command i3status | my-i3status.py
4164 # in the 'bar' section. Make sure my-i3status.py is in $PATH.
4166 # © 2012 Valentin Haenel <valentin.haenel@gmx.de>
4167 # © 2018 Amin Bandali <bandali@gnu.org>
4169 # This program is free software. It comes without any warranty, to the extent
4170 # permitted by applicable law. You can redistribute it and/or modify it under
4171 # the terms of the Do What The Fuck You Want To Public License (WTFPL), Version
4172 # 2, as published by Sam Hocevar. See http://sam.zoy.org/wtfpl/COPYING for more
4180 """ Return true if ~/.nosleep exists. """
4181 return os.path.isfile(os.path.expanduser("~/.nosleep"))
4183 def print_line(message):
4184 """ Non-buffered printing to stdout. """
4185 sys.stdout.write(message + '\n')
4189 """ Interrupted respecting reader for stdin. """
4190 # try reading a line, removing any extra whitespace
4192 line = sys.stdin.readline().strip()
4193 # i3status sends EOF, or an empty line
4198 except KeyboardInterrupt:
4201 if __name__ == '__main__':
4202 # Skip the first line which contains the version header.
4203 print_line(read_line())
4205 # The second line contains the start of the infinite array.
4206 print_line(read_line())
4209 line, prefix = read_line(), ''
4210 # ignore comma at start of lines
4211 if line.startswith(','):
4212 line, prefix = line[1:], ','
4215 j = json.loads(line)
4216 # insert information into the start of the json, but could be anywhere
4217 j.insert(0, {'full_text' : '🖵 ', 'name' : 'nosleep'})
4218 # and echo back new encoded json
4219 print_line(prefix+json.dumps(j))
4221 print_line(prefix+line)
4226 :header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
4231 val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 12)
4232 [ -n "$val" ] && light -S $val
4237 :header-args+: :tangle ~/.local/bin/rofi-remmina.py :shebang "#!/usr/bin/env python2"
4243 from subprocess import Popen, PIPE
4245 remmina_dir = os.path.expanduser("~/.local/share/remmina")
4249 for f in os.listdir(remmina_dir):
4250 fp = os.path.join(remmina_dir, f)
4251 c = ConfigParser.ConfigParser()
4253 n = c.get('remmina', 'name')
4256 lines = max(min(15, len(fdict)), 1);
4257 width = len(max(fdict.keys(), key=len))
4258 rofi = Popen(["rofi", "-i", "-dmenu", \
4259 "-l", str(lines), "-width", str(width), \
4260 "-p", "connection"], stdout=PIPE, stdin=PIPE)
4261 selected = rofi.communicate("\n" \
4262 .join(fdict.keys()) \
4263 .encode("utf-8"))[0] \
4268 r = Popen(["remmina", "-c", fdict[selected]])
4274 :header-args+: :tangle ~/.local/bin/s :shebang "#!/bin/bash"
4278 export _JAVA_AWT_WM_NONREPARENTING=1
4279 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4281 source $HOME/.zprofile
4287 :header-args+: :tangle ~/.local/bin/sway-ws-util :shebang "#!/bin/bash"
4291 curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name')
4292 [[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1))
4293 [[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1))
4297 if [ "$1" = "switch" ] || [ "$1" = "move" ]; then
4299 if [ "$2" = "prev" ]; then
4301 elif [ "$2" = "next" ]; then
4304 echo "Usage: $0 $1 {prev|next} [follow]"
4308 echo "Usage: $0 {switch|move} {prev|next} [follow]"
4312 if [ "$op" = "switch" ]; then
4313 sway workspace "$dest_ws"
4314 elif [ "$op" = "move" ]; then
4315 sway move container to workspace "$dest_ws"
4316 if [ "$3" = "follow" ]; then
4317 sway workspace "$dest_ws"
4324 :header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
4327 #+begin_src bash :tangle no
4328 lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
4330 if [ "$lang" = "us" ]; then
4334 # xmodmap $HOME/.Xmodmap
4338 ** toggle-presentation-mode
4340 :header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
4343 #+begin_src bash :tangle no
4344 xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
4349 :header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
4352 This script toggles between a 'normal' mode and a 'tablet' mode, doing
4355 - rotates the screen using =xrandr=, so that rotating the physical
4356 display of my X220t would have the laptop's battery on the right
4358 - enables touch screen,
4359 - properly rotates the stylus pen and touch screen pointers, and
4360 - toggles between RGB and Vertical BGR sub-pixel order.
4362 #+begin_src bash :tangle no
4363 case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
4364 0) # Screen is not rotated, we should rotate it right (90°)
4366 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
4367 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
4368 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
4369 xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
4371 1) # Currently top is rotated right, we should set it normal (0°)
4373 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
4374 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
4375 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
4376 xfconf-query -c xsettings -p /Xft/RGBA -s rgb
4379 echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
4387 :header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
4390 #+begin_src python :tangle no
4391 import gnomekeyring as gk
4392 # list_item_ids_sync('login')[0] == 1L
4393 gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
4398 :header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh"
4401 #+begin_src sh :tangle no
4402 cur_vol=$(pamixer --get-volume)
4404 if [ $(pamixer --get-mute) = true ]; then
4405 printf 'mt \n' "$cur_vol"
4407 printf '%02d \n' "$cur_vol"
4413 My little wallpaper changer script.
4417 :header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
4420 #+begin_src bash :tangle no
4425 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
4428 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
4431 echo $"Usage: $0 {day|night}"
4438 :header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
4441 #+begin_src bash :tangle no
4450 echo "Did not find 'sed', script cannot continue."
4455 echo "Did not find rofi, there is no point to continue."
4460 # Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
4461 # Repeated calls should leave the config clean-ish
4463 function set_theme()
4465 CDIR="${HOME}/.config/rofi/"
4466 if [ ! -d "${CDIR}" ]
4470 if [ -f "${CDIR}/config" ]
4472 ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
4474 echo "rofi.theme: ${1}" >> "${CDIR}/config"
4478 if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
4480 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
4481 xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
4482 set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
4484 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
4485 xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
4486 set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
4492 :header-args+: :tangle ~/.config/systemd/user/wp.service
4495 #+begin_src conf :tangle no
4497 Description=wallpaper service
4501 ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
4506 :header-args+: :tangle ~/.config/systemd/user/wp.timer
4509 #+begin_src conf :tangle no
4512 Description=wallpaper timer
4520 WantedBy=timers.target
4525 :header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
4531 zathura --synctex-forward "$pos" "$pdffile" || \
4533 zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
4534 sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
4540 :header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
4544 # Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
4545 # [ESC] character in original post removed here.
4547 # ANSI Color -- use these variables to easily have different color
4548 # and format output. Make sure to output the reset sequence after
4549 # colors (f = foreground, b = background), and use the 'off'
4550 # feature for anything you turn on.
4554 esc="$(echo -en '\e')"
4556 blackf="${esc}[30m"; redf="${esc}[31m"; greenf="${esc}[32m"
4557 yellowf="${esc}[33m" bluef="${esc}[34m"; purplef="${esc}[35m"
4558 cyanf="${esc}[36m"; whitef="${esc}[37m"
4560 blackb="${esc}[40m"; redb="${esc}[41m"; greenb="${esc}[42m"
4561 yellowb="${esc}[43m" blueb="${esc}[44m"; purpleb="${esc}[45m"
4562 cyanb="${esc}[46m"; whiteb="${esc}[47m"
4564 boldon="${esc}[1m"; boldoff="${esc}[22m"
4565 italicson="${esc}[3m"; italicsoff="${esc}[23m"
4566 ulon="${esc}[4m"; uloff="${esc}[24m"
4567 invon="${esc}[7m"; invoff="${esc}[27m"
4572 # note in this first use that switching colors doesn't require a reset
4573 # first - the new color overrides the old one.
4581 ${yellowf} ▄███████▄${reset} ${redf} ▄██████▄${reset} ${greenf} ▄██████▄${reset} ${bluef} ▄██████▄${reset} ${purplef} ▄██████▄${reset} ${cyanf} ▄██████▄${reset}
4582 ${yellowf}▄█████████▀▀${reset} ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset} ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset} ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset} ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset} ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
4583 ${yellowf}███████▀${reset} ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset} ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset} ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset} ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset} ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
4584 ${yellowf}███████▄${reset} ${redf}████████████${reset} ${greenf}████████████${reset} ${bluef}████████████${reset} ${purplef}████████████${reset} ${cyanf}████████████${reset}
4585 ${yellowf}▀█████████▄▄${reset} ${redf}██▀██▀▀██▀██${reset} ${greenf}██▀██▀▀██▀██${reset} ${bluef}██▀██▀▀██▀██${reset} ${purplef}██▀██▀▀██▀██${reset} ${cyanf}██▀██▀▀██▀██${reset}
4586 ${yellowf} ▀███████▀${reset} ${redf}▀ ▀ ▀ ▀${reset} ${greenf}▀ ▀ ▀ ▀${reset} ${bluef}▀ ▀ ▀ ▀${reset} ${purplef}▀ ▀ ▀ ▀${reset} ${cyanf}▀ ▀ ▀ ▀${reset}
4588 ${boldon}${yellowf} ▄███████▄ ${redf} ▄██████▄ ${greenf} ▄██████▄ ${bluef} ▄██████▄ ${purplef} ▄██████▄ ${cyanf} ▄██████▄${reset}
4589 ${boldon}${yellowf}▄█████████▀▀ ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄ ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄ ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄ ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄ ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
4590 ${boldon}${yellowf}███████▀ ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███ ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███ ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███ ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███ ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
4591 ${boldon}${yellowf}███████▄ ${redf}████████████ ${greenf}████████████ ${bluef}████████████ ${purplef}████████████ ${cyanf}████████████${reset}
4592 ${boldon}${yellowf}▀█████████▄▄ ${redf}██▀██▀▀██▀██ ${greenf}██▀██▀▀██▀██ ${bluef}██▀██▀▀██▀██ ${purplef}██▀██▀▀██▀██ ${cyanf}██▀██▀▀██▀██${reset}
4593 ${boldon}${yellowf} ▀███████▀ ${redf}▀ ▀ ▀ ▀ ${greenf}▀ ▀ ▀ ▀ ${bluef}▀ ▀ ▀ ▀ ${purplef}▀ ▀ ▀ ▀ ${cyanf}▀ ▀ ▀ ▀${reset}
4600 :header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
4605 # ANSI color scheme script featuring Space Invaders
4607 # Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
4608 # Modified by lolilolicon
4614 printf -v $j$i %b "\e[${!j}${i}m"
4622 $f1 ▀▄ ▄▀ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4 ▀▄ ▄▀ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
4623 $f1 ▄█▀███▀█▄ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4 ▄█▀███▀█▄ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
4624 $f1█▀███████▀█ $f2▀▀███▀▀███▀▀ $f3▀█▀██▀█▀ $f4█▀███████▀█ $f5▀▀███▀▀███▀▀ $f6▀█▀██▀█▀$rst
4625 $f1▀ ▀▄▄ ▄▄▀ ▀ $f2 ▀█▄ ▀▀ ▄█▀ $f3▀▄ ▄▀ $f4▀ ▀▄▄ ▄▄▀ ▀ $f5 ▀█▄ ▀▀ ▄█▀ $f6▀▄ ▄▀$rst
4627 $bld$f1▄ ▀▄ ▄▀ ▄ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4▄ ▀▄ ▄▀ ▄ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
4628 $bld$f1█▄█▀███▀█▄█ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4█▄█▀███▀█▄█ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
4629 $bld$f1▀█████████▀ $f2▀▀▀██▀▀██▀▀▀ $f3▀▀█▀▀█▀▀ $f4▀█████████▀ $f5▀▀▀██▀▀██▀▀▀ $f6▀▀█▀▀█▀▀$rst
4630 $bld$f1 ▄▀ ▀▄ $f2▄▄▀▀ ▀▀ ▀▀▄▄ $f3▄▀▄▀▀▄▀▄ $f4 ▄▀ ▀▄ $f5▄▄▀▀ ▀▀ ▀▀▄▄ $f6▄▀▄▀▀▄▀▄$rst