git.shemshak.org - ~bandali/configs/blob - rc.org

   1 #+title: rc.org
   2 #+property: header-args :comments link :mkdirp yes :results silent
   3
   4 * About
   5
   6 This org file contains the configuration files of pretty much every
   7 program I use. The files are tangled (i.e. exported, or derived) from
   8 this file using =org-babel=.
   9
  10 Note: This file is best viewed inside Emacs with org mode.
  11
  12 * Configs
  13
  14 This section contains the configuration files (dotfiles) of various
  15 programs I use.
  16
  17 ** bspwm
  18
  19 *** bspwmrc
  20 :PROPERTIES:
  21 :header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
  22 :END:
  23
  24 #+begin_src sh
  25 sxhkd &
  26 sh ~/.fehbg &
  27 xfce4-panel -d &
  28 compton &
  29 sleep 0.5 && pasystray --notify=all &
  30
  31 bspc monitor -d I II III IV V VI VII VIII IX X
  32 #bspc monitor eDP-1 -d I II III IV V
  33 #bspc monitor HDMI-1 -d VI VII VIII IX X
  34
  35 #bspc config border_width         2
  36 #bspc config window_gap           8
  37 bspc config window_gap           0
  38
  39 bspc config bottom_padding 26
  40
  41 bspc config split_ratio          0.52
  42 bspc config borderless_monocle   true
  43 bspc config gapless_monocle      true
  44 bspc config click_to_focus       button1
  45 bspc config directional_focus_tightness low
  46
  47 #bspc rule -a Firefox desktop='^1' follow=on
  48 bspc rule -a Nightly desktop='^1' follow=on
  49 bspc rule -a Emacs desktop='^2' state=tiled follow=on
  50 #bspc rule -a Chromium desktop='^4' follow=on
  51 bspc rule -a URxvt state=floating
  52 bspc rule -a URxvt:tiled state=tiled
  53 bspc rule -a Connman-gtk state=floating
  54 bspc rule -a Xfce4-panel state=floating
  55 bspc rule -a TelegramDesktop state=floating
  56 bspc rule -a Ec state=floating
  57 bspc rule -a Pavucontrol state=floating
  58 bspc rule -a Eog state=floating
  59 bspc rule -a Seahorse state=floating
  60 bspc rule -a mpv state=floating
  61 bspc rule -a Evince state=floating
  62 bspc rule -a Meld state=floating
  63 bspc rule -a Autokey-gtk state=floating
  64 bspc rule -a Mousepad state=floating
  65 bspc rule -a Wrapper-1.0 state=floating
  66 bspc rule -a File-roller state=floating
  67 bspc rule -a Gnome-disks state=floating
  68 bspc rule -a Termite state=floating
  69 bspc rule -a Termite:tiled state=tiled
  70 bspc rule -a Thunderbird:Calendar state=floating
  71 bspc rule -a Audacity state=floating
  72 bspc rule -a Proof state=floating # pvs x-show-proof
  73 bspc rule -a Nm-connection-editor state=floating
  74 bspc rule -a Wire state=floating
  75 bspc rule -a discord state=floating
  76 bspc rule -a X2goclient state=floating
  77 bspc rule -a SimpleScreenRecorder state=floating
  78 bspc rule -a Gimp state=floating
  79 bspc rule -a Wrapper-2.0 state=floating
  80 bspc rule -a Zathura state=tiled
  81 #+end_src
  82
  83 *** sxhkdrc
  84 :PROPERTIES:
  85 :header-args+: :tangle ~/.config/sxhkd/sxhkdrc
  86 :END:
  87
  88 #+begin_src conf
  89 #
  90 # wm independent hotkeys
  91 #
  92
  93 # terminal emulator
  94 super + {_,shift} + Return
  95         urxvt{_, -name tiled}
  96
  97 #super + {_,shift} + Return
  98 #       termite{_, --name=tiled}
  99
 100 # program launcher
 101 super + space
 102         rofi -show run -display-run '> ' -display-window ' 🗔 '
 103
 104 super + alt + space
 105         xfce4-popup-whiskermenu
 106
 107 # window finder
 108 super + backslash
 109         rofi -show window  -display-run '> ' -display-window ' 🗔 '
 110
 111 # password manager
 112 alt + space
 113         rofi-pass
 114
 115 # firefox
 116 #super + r
 117 #       firefox
 118
 119 # chromium
 120 #super + c
 121 #       chromium -incognito
 122
 123 # emacs
 124 super + e
 125         emacs
 126
 127 # make sxhkd reload its configuration files:
 128 super + Escape
 129         pkill -USR1 -x sxhkd
 130
 131 # volume {up,down}
 132 XF86Audio{Raise,Lower}Volume
 133         pamixer --allow-boost --{in,de}crease 5
 134
 135 # mute
 136 XF86AudioMute
 137         pamixer --toggle-mute
 138
 139 XF86AudioMicMute
 140         pactl set-source-mute 1 toggle
 141
 142 # playback control
 143 XF86Audio{Play,Prev,Next}
 144         mpc {toggle,prev,next}
 145
 146 # lock the screen
 147 super + shift + q
 148         light-locker-command -l
 149
 150 # Toggle keyboard layout
 151 super + F7
 152         toggle-layout
 153
 154 # Toggle Xfce presentation mode
 155 XF86LaunchB
 156         toggle-presentation-mode
 157
 158 # monitor brightness
 159 XF86MonBrightness{Up,Down}
 160         light -{A,U} 5
 161
 162 super + apostrophe
 163         rofi-light
 164
 165 # keyboard brightness
 166 #XF86KbdBrightness{Up,Down}
 167 #       kbdlight {up,down}
 168
 169 XF86RotateWindows
 170         toggle-tablet
 171
 172 #
 173 # bspwm hotkeys
 174 #
 175
 176 # quit bspwm normally
 177 super + alt + Escape
 178         bspc quit
 179
 180 # close and kill
 181 super + {w,q}
 182         bspc node -{c,k}
 183
 184 # alternate between the tiled and monocle layout
 185 super + m
 186         bspc desktop -l next
 187
 188 # send the newest marked node to the newest preselected node
 189 super + y
 190         bspc node newest.marked.local -n newest.!automatic.local
 191
 192 # swap the current node and the biggest node
 193 super + g
 194         bspc node -s biggest
 195
 196 #
 197 # state/flags
 198 #
 199
 200 # set the window state
 201 super + {t,shift + t,s,f}
 202         bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
 203
 204 # set the node flags
 205 super + ctrl + {m,x,y,z}
 206         bspc node -g {marked,locked,sticky,private}
 207
 208 #
 209 # focus/swap
 210 #
 211
 212 # focus the node in the given direction
 213 super + {_,shift + }{h,j,k,l}
 214         bspc node -{f,s} {west,south,north,east}
 215
 216 # focus the node for the given path jump
 217 super + {p,b,comma,period}
 218         bspc node -f @{parent,brother,first,second}
 219
 220 # focus the next/previous node in the current desktop
 221 super + {_,shift + }c
 222         bspc node -f {next,prev}.local
 223
 224 # focus the next/previous desktop in the current monitor
 225 super + bracket{left,right}
 226         bspc desktop -f {prev,next}.local
 227
 228 # send to next/prev desktop
 229 super + shift + bracket{left,right}
 230         bspc node -d {prev,next} --follow
 231
 232 # focus the last node/desktop
 233 super + {grave,Tab}
 234         bspc {node,desktop} -f last
 235
 236 # focus the older or newer node in the focus history
 237 super + {o,i}
 238         bspc wm -h off; \
 239         bspc node {older,newer} -f; \
 240         bspc wm -h on
 241
 242 # focus or send to the given desktop
 243 super + {_,shift + }{1-9,0}
 244         bspc {desktop -f,node -d} '^{1-9,10}'
 245
 246 #
 247 # preselect
 248 #
 249
 250 # preselect the direction
 251 super + ctrl + {h,j,k,l}
 252         bspc node -p {west,south,north,east}
 253
 254 # preselect the ratio
 255 super + ctrl + {1-9}
 256         bspc node -o 0.{1-9}
 257
 258 # cancel the preselection for the focused node
 259 super + ctrl + space
 260         bspc node -p cancel
 261
 262 # cancel the preselection for the focused desktop
 263 super + ctrl + shift + space
 264         bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
 265
 266 #
 267 # move/resize
 268 #
 269
 270 # expand a window by moving one of its side outward
 271 super + alt + {h,j,k,l}
 272         bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
 273
 274 # contract a window by moving one of its side inward
 275 super + alt + shift + {h,j,k,l}
 276         bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
 277
 278 # move a floating window
 279 super + {Left,Down,Up,Right}
 280         bspc node -v {-20 0,0 20,0 -20,20 0}
 281
 282 #alt + bracket{left,right}
 283 #       xdotool key --clearmodifiers ctrl+Page_{Up,Down}
 284 #+end_src
 285
 286 ** compton
 287 :PROPERTIES:
 288 :header-args+: :tangle ~/.config/compton.conf
 289 :END:
 290
 291 #+begin_src conf
 292 # Shadow
 293 shadow = false;                 # Enabled client-side shadows on windows.
 294 no-dock-shadow = true;          # Avoid drawing shadows on dock/panel windows.
 295 no-dnd-shadow = true;           # Don't draw shadows on DND windows.
 296 clear-shadow = true;            # Zero the part of the shadow's mask behind the
 297                                 # window. Fix some weirdness with ARGB windows.
 298 shadow-radius = 5;              # The blur radius for shadows. (default 12)
 299 shadow-offset-x = -5;           # The left offset for shadows. (default -15)
 300 shadow-offset-y = -5;           # The top offset for shadows. (default -15)
 301 # shadow-opacity = 0.7;         # The translucency for shadows. (default .75)
 302 # shadow-red = 0.0;             # Red color value of shadow. (0.0 - 1.0, defaults to 0)
 303 # shadow-green = 0.0;           # Green color value of shadow. (0.0 - 1.0, defaults to 0)
 304 # shadow-blue = 0.0;            # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
 305 shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ];    # Exclude conditions for shadows.
 306 # shadow-exclude = "n:e:Notification";
 307 #shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
 308 shadow-ignore-shaped = true;    # Avoid drawing shadow on all shaped windows
 309                                 # (see also: --detect-rounded-corners)
 310
 311 # Opacity
 312 menu-opacity = 1.0;                     # The opacity for menus. (default 1.0)
 313 #inactive-opacity = 0.9;                        # Default opacity of inactive windows. (0.0 - 1.0)
 314 # active-opacity = 0.8;                 # Default opacity for active windows. (0.0 - 1.0)
 315 frame-opacity = 1.0;                    # Opacity of window titlebars and borders. (0.1 - 1.0)
 316 # inactive-opacity-override = true;     # Let inactive opacity set by 'inactive-opacity' overrides
 317                                         # value of _NET_WM_OPACITY. Bad choice.
 318 alpha-step = 0.06;                      # XRender backend: Step size for alpha pictures. Increasing
 319                                         # it may result in less X resource usage,
 320                                         # Yet fading may look bad.
 321 #inactive-dim = 0.5;                    # Dim inactive windows. (0.0 - 1.0)
 322 #inactive-dim-fixed = true;             # Do not let dimness adjust based on window opacity.
 323 # blur-background = true;               # Blur background of transparent windows.
 324                                         # Bad performance with X Render backend.
 325                                         # GLX backend is preferred.
 326 # blur-background-frame = true;         # Blur background of opaque windows with transparent
 327                                         # frames as well.
 328 blur-background-fixed = true;           # Do not let blur radius adjust based on window opacity.
 329 blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
 330                                         # Exclude conditions for background blur.
 331
 332 # Fading
 333 fading = false;                 # Fade windows during opacity changes.
 334 fade-delta = 3;         # The time between steps in a fade in milliseconds. (default 10).
 335 fade-in-step = 0.03;            # Opacity change between steps while fading in. (default 0.028).
 336 fade-out-step = 0.03;           # Opacity change between steps while fading out. (default 0.03).
 337 # no-fading-openclose = true;   # Avoid fade windows in/out when opening/closing.
 338 fade-exclude = [ ];             # Exclude conditions for fading.
 339
 340 # Other
 341 backend = "glx"                 # Backend to use: "xrender" or "glx". GLX backend is typically
 342                                 # much faster but depends on a sane driver.
 343 mark-wmwin-focused = true;      # Try to detect WM windows and mark them as active.
 344 mark-ovredir-focused = true;    # Mark all non-WM but override-redirect windows active (e.g. menus).
 345 use-ewmh-active-win = true;     # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
 346                                 # instead of using FocusIn/Out events. Usually more reliable but
 347                                 # depends on a EWMH-compliant WM.
 348 detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
 349 detect-client-opacity = true;   # Detect _NET_WM_OPACITY on client windows, useful for window
 350                                 # managers not passing _NET_WM_OPACITY of client windows to frame
 351                                 # windows.
 352 refresh-rate = 0;               # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
 353 vsync = "drm";                  # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
 354                                 # See man page for more details.
 355 dbe = false;                    # Enable DBE painting mode. Rarely needed.
 356 paint-on-overlay = true;        # Painting on X Composite overlay window. Recommended.
 357 sw-opti = false;                # Limit compton to repaint at most once every 1 / refresh_rate.
 358                                 # Incompatible with certain VSync methods.
 359 unredir-if-possible = false;    # Unredirect all windows if a full-screen opaque window is
 360                                 # detected, to maximize performance for full-screen windows.
 361 focus-exclude = [ ];            # A list of conditions of windows that should always be considered
 362                                 # focused.
 363 detect-transient = true;        # Use WM_TRANSIENT_FOR to group windows, and consider windows in
 364                                 # the same group focused at the same time.
 365 detect-client-leader = true;    # Use WM_CLIENT_LEADER to group windows.
 366 invert-color-include = [ ];     # Conditions for windows to be painted with inverted color.
 367
 368 # GLX backend                   # GLX backend fine-tune options. See man page for more info.
 369 glx-no-stencil = true;          # Recommended.
 370 glx-copy-from-front = false;    # Useful with --glx-swap-method,
 371 # glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
 372 # glx-no-rebind-pixmap = true;  # Recommended if it works.
 373 glx-no-rebind-pixmap = true;    # Recommended if it works.
 374 #glx-swap-method = "4"; # See man page.
 375 glx-swap-method = "4";  # See man page.
 376
 377 # Window type settings
 378 wintypes:
 379 {
 380   tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
 381   menu = { shadow = false; };
 382   dropdown_menu = { shadow = false; };
 383   popup_menu =  { shadow = false; };
 384   utility =  { shadow = false; };
 385   # fade: Fade the particular type of windows.
 386   # shadow: Give those windows shadow
 387   # opacity: Default opacity for the type of windows.
 388   # focus: Whether to always consider windows of this type focused.
 389 };
 390 #+end_src
 391
 392 ** Dunst
 393 :PROPERTIES:
 394 :header-args+: :tangle ~/.config/dunst/dunstrc
 395 :END:
 396
 397 #+begin_src conf
 398 [global]
 399 #font = Ubuntu Mono 10.5
 400 font = Inconsolata 11
 401
 402 # Path to default icons.
 403 icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
 404
 405 icon_position = left
 406 # <b>bold</b>
 407 # <i>italic</i>
 408 # <s>strikethrough<s/>
 409 # <u>underline</u>
 410 markup = full
 411 # The format of the message. Possible variables are:
 412 #   %a  appname
 413 #   %s  summary
 414 #   %b  body
 415 #   %i  iconname (including its path)
 416 #   %I  iconname (without its path)
 417 #   %p  progress value if set ([  0%] to [100%]) or nothing
 418 # Markup is allowed
 419 format = "<b>%s</b>\n%b"
 420 # Sort messages by urgency
 421 sort = yes
 422 # Show how many messages are currently hidden (because of geometry)
 423 indicate_hiddenl= no
 424 # Alignment of message text.
 425 # Possible values are "left", "center" and "right"
 426 alignment = center
 427 # The frequency with wich text that is longer than the notification
 428 # window allows bounces back and forth.
 429 # This option conflicts with 'word_wrap'.
 430 # Set to 0 to disable
 431 bounce_freq = 3
 432 # show age of message if message is older than show_age_threshold seconds.
 433 # set to -1 to disable
 434 show_age_threshold = -1
 435 # split notifications into multiple lines if they don't fit into geometry
 436 word_wrap = yes
 437 # ignore newlines '\n' in notifications
 438 ignore_newline = no
 439 # The geometry of the message window.
 440 # geometry [{width}]x{height}][+/-{x}+/-{y}]
 441 # The height is measured in number of notifications everything else in pixels. If the width
 442 # is omitted but the height is given ("-geometry x2"), the message window
 443 # expands over the whole screen (dmenu-like). If width is 0,
 444 # the window expands to the longest message displayed.
 445 # A positive x is measured from the left, a negative from the
 446 # right side of the screen.  Y is measured from the top and down respectevly.
 447 # The width can be negative. In this case the actual width is the
 448 # screen width minus the width defined in within the geometry option.
 449 #geometry = "410x12-12+12"
 450 #geometry = "0x0-30-30"
 451 geometry = "260x12-30-30"
 452 # The transparency of the window. range: [0; 100]
 453 # This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
 454 transparency = 0
 455 # Don't remove messages, if the user is idle (no mouse or keyboard input)
 456 # for longer than idle_threshold seconds.
 457 # Set to 0 to disable.
 458 idle_threshold = 120
 459 # Which monitor should the notifications be displayed on.
 460 monitor = 0
 461 # Display notification on focused monitor. Possible modes are:
 462 # mouse: follow mouse pointer
 463 # keyboard: follow window with keyboard focus
 464 # none: don't follow anything
 465 #
 466 # "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
 467 # This should be the case for almost all modern windowmanagers.
 468 #
 469 # If this option is set to mouse or keyboard, the monitor option will be
 470 # ignored.
 471 follow = keyboard
 472 # should a notification popped up from history be sticky or
 473 # timeout as if it would normally do.
 474 sticky_history = yes
 475 # The height of a single line. If the height is smaller than the font height,
 476 # it will get raised to the font height.
 477 # This adds empty space above and under the text.
 478 line_height = 0
 479
 480 show_indicators = yes
 481
 482 # Draw a line of 'separatpr_height' pixel height between two notifications.
 483 # Set to 0 to disable
 484 separator_height = 3
 485 # padding between text and separator
 486 padding = 8
 487 # horizontal padding
 488 horizontal_padding = 8
 489 # Define a color for the separator.
 490 # possible values are:
 491 #  * auto: dunst tries to find a color fitting to the background
 492 #  * foreground: use the same color as the foreground
 493 #  * frame: use the same color as the frame.
 494 #  * anything else will be interpreted as a X color
 495 separator_color = foreground
 496 # print a notification on startup
 497 # This is mainly for error detection, since dbus (re-)starts dunst
 498 # automatically after a crash.
 499 startup_notification = false
 500 # dmenu path
 501 #dmenu = /usr/bin/dmenu -p dunst:
 502 dmenu = /usr/bin/rofi -dmenu -p dunst:
 503 # browser for opening urls in context menu
 504 browser = /usr/bin/firefox -new-tab
 505 [frame]
 506 width = 0
 507 color = "#377222"
 508 [shortcuts]
 509 # shortcuts are specified as [modifier+][modifier+]...key
 510 # available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
 511 # and 'mod4' (windows-key)
 512 # xev might be helpful to find names for keys
 513 # close notification
 514 close = ctrl+space
 515 # close all notifications
 516 close_all = ctrl+shift+space
 517 # redisplay last message(s)
 518 # On the US keyboard layout 'grave' is normally above TAB and left of '1'.
 519 history = ctrl+shift+h
 520 # context menu
 521 context = ctrl+shift+period
 522 [urgency_low]
 523 # IMPORTANT: colors have to be defined in quotation marks.
 524 # Otherwise the '#' and following  would be interpreted as a comment.
 525 background = "#1d2a30"
 526 foreground = "#71c2af"
 527 timeout = 3
 528 [urgency_normal]
 529 background = "#1d2a30"
 530 foreground = "#71c2af"
 531 timeout = 0
 532 [urgency_critical]
 533 background = "#1d2a30"
 534 foreground = "#ff9982"
 535 timeout = 0
 536
 537 # Every section that isn't one of the above is interpreted as a rules
 538 # to override settings for certain messages.
 539 # Messages can be matched by 'appname', 'summary', 'body' or 'icon'
 540 # and you can override the 'timeout', 'urgency', 'foreground', 'background'
 541 # and 'format'.
 542 # Shell-like globbing will get expanded.
 543 #
 544 # SCRIPTING
 545 # you can specify a script that gets run when the rule matches by setting
 546 # the 'script' option.
 547 # The script will be called as follows:
 548 # script appname summary body icon urgency
 549 # where urgency can be "LOW", "NORMAL" or "CRITICAL".
 550 #
 551 # NOTE: if you don't want a notification to be displayed, set the format to ""
 552 # NOTE: It might be helpful to run dunst -print in a terminal in order to find
 553 # fitting options for rules.
 554 #[espeak]
 555 #    summary = "*"
 556 #    script = dunst_espeak.sh
 557 #[script-test]
 558 #    summary = "*script*"
 559 #    script = dunst_test.sh
 560 #[ignore]
 561 ## This notification will not be displayed
 562 #    summary = "foobar"
 563 #    format = ""
 564 #[signed_on]
 565 #    appname = Pidgin
 566 #    summary = "*signed on*"
 567 #    urgency = low
 568 #
 569 #[signed_off]
 570 #    appname = Pidgin
 571 #    summary = *signed off*
 572 #    urgency = low
 573 #
 574 #[says]
 575 #    appname = Pidgin
 576 #    summary = *says*
 577 #    urgency = critical
 578 #
 579 #[twitter]
 580 #    appname = Pidgin
 581 #    summary = *twitter.com*
 582 #    urgency = normal
 583 #
 584 [xfpm-backlight]
 585     summary = *Brightness*
 586     urgency = low
 587 #+end_src
 588
 589 ** Fontconfig
 590 :PROPERTIES:
 591 :header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
 592 :END:
 593
 594 #+begin_src xml
 595 <?xml version="1.0"?>
 596 <!DOCTYPE fontconfig SYSTEM "fonts.dtd">
 597 <fontconfig>
 598  <match target="font">
 599   <edit mode="assign" name="rgba">
 600    <const>rgb</const>
 601   </edit>
 602  </match>
 603  <match target="font">
 604   <edit mode="assign" name="hinting">
 605    <bool>true</bool>
 606   </edit>
 607  </match>
 608  <match target="font">
 609   <edit mode="assign" name="hintstyle">
 610    <const>hintslight</const>
 611   </edit>
 612  </match>
 613  <match target="font">
 614   <edit mode="assign" name="antialias">
 615    <bool>true</bool>
 616   </edit>
 617  </match>
 618  <match target="font">
 619   <edit mode="assign" name="lcdfilter">
 620    <const>lcddefault</const>
 621   </edit>
 622  </match>
 623  <dir>~/.fonts</dir>
 624
 625  <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
 626  <alias binding="same">
 627   <family>Helvetica</family>
 628   <accept>
 629    <family>Liberation Sans</family>
 630   </accept>
 631 </alias>
 632 </fontconfig>
 633 #+end_src
 634
 635 ** Git
 636
 637 *** gitconfig
 638 :PROPERTIES:
 639 :header-args+: :tangle ~/.gitconfig
 640 :END:
 641
 642 **** user
 643 #+begin_src conf
 644 [user]
 645     name = Amin Bandali
 646     email = amin@aminb.org
 647     signingkey = 4E05246AB0BF7FFB
 648 #+end_src
 649
 650 **** signing
 651 #+begin_src conf
 652 [commit]
 653     gpgsign = true
 654 # [format]
 655 #     signoff = true
 656 #+end_src
 657
 658 **** core
 659 #+begin_src conf
 660 [core]
 661     autocrlf = input  # CRLF -> LF on commit
 662     editor = emacsclient -t
 663     excludesfile = ~/.gitignore_global
 664     pager = "less"
 665 #+end_src
 666
 667 **** gpg
 668 #+begin_src conf
 669 [gpg]
 670     program = gpg2
 671 #+end_src
 672
 673 **** alias
 674 #+begin_src conf
 675 [alias]
 676     git = !exec git  # handle nested git calls, e.g. git git status
 677     aliases = config --get-regexp '^alias\\.'
 678     a = add
 679     s = status
 680     sl = status --long
 681     c = checkout
 682     cb = checkout -b
 683     b = branch
 684     r = rebase
 685     p = pull
 686     pr = pull --rebase
 687     ps = push
 688     psf = push --force
 689 #+end_src
 690
 691 **** color
 692 #+begin_src conf
 693 [color]
 694     ui = auto
 695 [color "status"]
 696     added = green bold
 697     changed = red bold
 698     untracked = red bold
 699 [color "branch"]
 700     current = green bold
 701     remote = magenta bold
 702 [color "diff"]
 703     new = green bold
 704     old = red bold
 705 #+end_src
 706
 707 **** status
 708 #+begin_src conf
 709 [status]
 710     # showUntrackedFiles = all
 711     short=true
 712     branch=true
 713 #+end_src
 714
 715 **** github
 716 #+begin_src conf
 717 [github]
 718         user = aminb
 719 #+end_src
 720
 721 **** send-email
 722 #+begin_src conf
 723 [sendemail]
 724         smtpuser = amin@aminb.org
 725         smtpserver = nix.aminb.org
 726         smtpserverport = 587
 727         smtpencryption = tls
 728         annotate = yes
 729 #+end_src
 730
 731 *** gitignore
 732 :PROPERTIES:
 733 :header-args+: :tangle ~/.gitignore_global
 734 :END:
 735
 736 #+begin_src conf
 737 *.orig
 738 *.py[co]
 739 *.sublime-workspace
 740 *~
 741 .DS_Store
 742 *.elc
 743 *-autoloads.el
 744 #+end_src
 745
 746 ** Latexmk
 747 :PROPERTIES:
 748 :header-args+: :tangle ~/.latexmkrc
 749 :END:
 750
 751 #+begin_src conf
 752 $pdf_previewer = "start zathura %O %S";
 753 $clean_ext = "aux out";
 754
 755 # $pdf_update_method = 4;
 756 # $pdf_update_command = "zathura %O %S";
 757
 758 # Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
 759 # by Ctrl+click in the PDF.
 760 # Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
 761 # editor.
 762 # $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
 763 #+end_src
 764
 765 ** libinput
 766
 767 Improve XPS 15 9560's touchpad experience.
 768
 769 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
 770 Section "InputClass"
 771     Identifier "libinput touchpad catchall"
 772     Driver "libinput"
 773     MatchIsTouchpad "on"
 774     Option "ClickMethod" "clickfinger"
 775     Option "NaturalScrolling" "true"
 776     Option "Tapping" "on"
 777     Option "TappingButtonMap" "lrm"
 778 EndSection
 779 #+end_src
 780
 781 ** getmail
 782
 783 *** getmailrc
 784 :PROPERTIES:
 785 :header-args+: :tangle ~/.getmail/getmailrc
 786 :END:
 787
 788 #+begin_src conf
 789 [retriever]
 790 type = SimplePOP3SSLRetriever
 791 server = fencepost.gnu.org
 792 username = aminb
 793 password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
 794 port = 995
 795 use_apop = True
 796
 797 [destination]
 798 type = Maildir
 799 path = ~/mail/gnu/Inbox/
 800
 801 [options]
 802 delete = True
 803 #+end_src
 804
 805 *** getmail.service
 806 :PROPERTIES:
 807 :header-args+: :tangle ~/.config/systemd/user/getmail.service
 808 :END:
 809
 810 #+begin_src conf :tangle no
 811 [Unit]
 812 Description=getmail service
 813
 814 [Service]
 815 Type=oneshot
 816 ExecStart=/usr/bin/getmail
 817 StandardOutput=syslog
 818 StandardError=syslog
 819 #+end_src
 820
 821 *** getmail.timer
 822 :PROPERTIES:
 823 :header-args+: :tangle ~/.config/systemd/user/getmail.timer
 824 :END:
 825
 826 #+begin_src conf :tangle no
 827 [Unit]
 828 Description=getmail timer
 829
 830 [Timer]
 831 OnCalendar=*:0/30
 832 Persistent=true
 833 Unit=getmail.service
 834
 835 [Install]
 836 WantedBy=timers.target
 837 #+end_src
 838
 839 ** GnuPG
 840 :PROPERTIES:
 841 :header-args+: :tangle ~/.gnupg/gpg-agent.conf
 842 :END:
 843
 844 #+begin_src conf
 845 default-cache-ttl 43200
 846 max-cache-ttl 43200
 847
 848 default-cache-ttl-ssh 10800
 849 max-cache-ttl-ssh 10800
 850
 851 # pinentry-program /usr/bin/pinentry-qt
 852 #+end_src
 853
 854 ** GTK
 855
 856 *** gtk-2.0
 857 :PROPERTIES:
 858 :header-args+: :tangle ~/.gtkrc-2.0
 859 :END:
 860
 861 #+begin_src conf
 862 gtk-theme-name="Greybird"
 863 gtk-icon-theme-name="Paper"
 864 gtk-font-name="Ubuntu 10"
 865 gtk-menu-images=0
 866 # gtk-key-theme-name = "Emacs"
 867 #+end_src
 868
 869 *** gtk-3.0
 870 :PROPERTIES:
 871 :header-args+: :tangle ~/.config/gtk-3.0/settings.ini
 872 :END:
 873
 874 #+begin_src conf :tangle no
 875 [Settings]
 876 gtk-icon-theme-name = Paper
 877 # gtk-theme-name = Adwaita
 878
 879 gtk-theme-name = Greybird
 880 # gtk-theme-name = Arc-Darker
 881 # gtk-theme-name = Numix-ArchBlue
 882
 883 gtk-font-name = Ubuntu 10
 884 # gtk-key-theme-name = Emacs
 885 #+end_src
 886
 887 ** isync
 888
 889 *** mbsyncrc
 890 :PROPERTIES:
 891 :header-args+: :tangle ~/.mbsyncrc
 892 :END:
 893
 894 #+begin_src conf
 895 # Global defaults
 896 CopyArrivalDate yes
 897
 898 ######
 899 IMAPAccount amin
 900 Host nix.aminb.org
 901 User amin@aminb.org
 902 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
 903 SSLType IMAPS
 904
 905 IMAPStore amin-remote
 906 Account amin
 907
 908 MaildirStore amin-local
 909 Path ~/mail/amin/
 910 Inbox ~/mail/amin/Inbox
 911 SubFolders Verbatim
 912
 913 Channel amin
 914 Master :amin-remote:
 915 Slave :amin-local:
 916 Patterns * !dovecot*
 917 Create Both
 918 SyncState *
 919
 920 ######
 921 IMAPAccount uwaterloo
 922 Host connect.uwaterloo.ca
 923 User abandali
 924 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
 925 SSLType IMAPS
 926
 927 IMAPStore uwaterloo-remote
 928 Account uwaterloo
 929
 930 MaildirStore uwaterloo-local
 931 Path ~/mail/uwaterloo/
 932 Inbox ~/mail/uwaterloo/Inbox
 933 SubFolders Verbatim
 934
 935 Channel uwaterloo
 936 Master :uwaterloo-remote:
 937 Slave :uwaterloo-local:
 938 Patterns * !dovecot*
 939 Create Both
 940 SyncState *
 941 #+end_src
 942
 943 *** mbsync.service
 944 :PROPERTIES:
 945 :header-args+: :tangle ~/.config/systemd/user/mbsync.service
 946 :END:
 947
 948 #+begin_src conf :tangle no
 949 [Unit]
 950 Description=mbsync service
 951
 952 [Service]
 953 Type=oneshot
 954 ExecStart=/usr/bin/mbsync -Va
 955 StandardOutput=syslog
 956 StandardError=syslog
 957 #+end_src
 958
 959 *** mbsync.timer
 960 :PROPERTIES:
 961 :header-args+: :tangle ~/.config/systemd/user/mbsync.timer
 962 :END:
 963
 964 #+begin_src conf :tangle no
 965 [Unit]
 966 Description=mbsync timer
 967
 968 [Timer]
 969 OnCalendar=*:0/15
 970 Persistent=true
 971 Unit=mbsync.service
 972
 973 [Install]
 974 WantedBy=timers.target
 975 #+end_src
 976
 977 ** mpd
 978 :PROPERTIES:
 979 :header-args+: :tangle ~/.config/mpd/mpd.conf
 980 :END:
 981
 982 #+begin_src conf
 983 # An example configuration file for MPD.
 984 # Read the user manual for documentation: http://www.musicpd.org/doc/user/
 985
 986
 987 # Files and directories #######################################################
 988 #
 989 # This setting controls the top directory which MPD will search to discover the
 990 # available audio files and add them to the daemon's online database. This
 991 # setting defaults to the XDG directory, otherwise the music directory will be
 992 # be disabled and audio files will only be accepted over ipc socket (using
 993 # file:// protocol) or streaming files over an accepted protocol.
 994 #
 995 music_directory         "~/usr/music"
 996 #
 997 # This setting sets the MPD internal playlist directory. The purpose of this
 998 # directory is storage for playlists created by MPD. The server will use
 999 # playlist files not created by the server but only if they are in the MPD
1000 # format. This setting defaults to playlist saving being disabled.
1001 #
1002 playlist_directory              "~/.mpd/playlists"
1003 #
1004 # This setting sets the location of the MPD database. This file is used to
1005 # load the database at server start up and store the database while the
1006 # server is not up. This setting defaults to disabled which will allow
1007 # MPD to accept files over ipc socket (using file:// protocol) or streaming
1008 # files over an accepted protocol.
1009 #
1010 db_file                 "~/.mpd/database"
1011 #
1012 # These settings are the locations for the daemon log files for the daemon.
1013 # These logs are great for troubleshooting, depending on your log_level
1014 # settings.
1015 #
1016 # The special value "syslog" makes MPD use the local syslog daemon. This
1017 # setting defaults to logging to syslog, otherwise logging is disabled.
1018 #
1019 log_file                        "~/.mpd/log"
1020 #
1021 # This setting sets the location of the file which stores the process ID
1022 # for use of mpd --kill and some init scripts. This setting is disabled by
1023 # default and the pid file will not be stored.
1024 #
1025 pid_file                        "~/.mpd/pid"
1026 #
1027 # This setting sets the location of the file which contains information about
1028 # most variables to get MPD back into the same general shape it was in before
1029 # it was brought down. This setting is disabled by default and the server
1030 # state will be reset on server start up.
1031 #
1032 state_file                      "~/.mpd/state"
1033 #
1034 # The location of the sticker database.  This is a database which
1035 # manages dynamic information attached to songs.
1036 #
1037 sticker_file                    "~/.mpd/sticker.sql"
1038 #
1039 ###############################################################################
1040
1041
1042 # General music daemon options ################################################
1043 #
1044 # This setting specifies the user that MPD will run as. MPD should never run as
1045 # root and you may use this setting to make MPD change its user ID after
1046 # initialization. This setting is disabled by default and MPD is run as the
1047 # current user.
1048 #
1049 #user                           "nobody"
1050 #
1051 # This setting specifies the group that MPD will run as. If not specified
1052 # primary group of user specified with "user" setting will be used (if set).
1053 # This is useful if MPD needs to be a member of group such as "audio" to
1054 # have permission to use sound card.
1055 #
1056 #group                          "nogroup"
1057 #
1058 # This setting sets the address for the daemon to listen on. Careful attention
1059 # should be paid if this is assigned to anything other then the default, any.
1060 # This setting can deny access to control of the daemon. Not effective if
1061 # systemd socket activiation is in use.
1062 #
1063 # For network
1064 #bind_to_address                "any"
1065 #
1066 # And for Unix Socket
1067 #bind_to_address                "~/.mpd/socket"
1068 #
1069 # This setting is the TCP port that is desired for the daemon to get assigned
1070 # to.
1071 #
1072 #port                           "6600"
1073 #
1074 # This setting controls the type of information which is logged. Available
1075 # setting arguments are "default", "secure" or "verbose". The "verbose" setting
1076 # argument is recommended for troubleshooting, though can quickly stretch
1077 # available resources on limited hardware storage.
1078 #
1079 #log_level                      "default"
1080 #
1081 # If you have a problem with your MP3s ending abruptly it is recommended that
1082 # you set this argument to "no" to attempt to fix the problem. If this solves
1083 # the problem, it is highly recommended to fix the MP3 files with vbrfix
1084 # (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
1085 # point gapless MP3 playback can be enabled.
1086 #
1087 #gapless_mp3_playback                   "yes"
1088 #
1089 # Setting "restore_paused" to "yes" puts MPD into pause mode instead
1090 # of starting playback after startup.
1091 #
1092 #restore_paused "no"
1093 #
1094 # This setting enables MPD to create playlists in a format usable by other
1095 # music players.
1096 #
1097 #save_absolute_paths_in_playlists       "no"
1098 #
1099 # This setting defines a list of tag types that will be extracted during the
1100 # audio file discovery process. The complete list of possible values can be
1101 # found in the user manual.
1102 #metadata_to_use        "artist,album,title,track,name,genre,date,composer,performer,disc"
1103 #
1104 # This setting enables automatic update of MPD's database when files in
1105 # music_directory are changed.
1106 #
1107 #auto_update    "yes"
1108 #
1109 # Limit the depth of the directories being watched, 0 means only watch
1110 # the music directory itself.  There is no limit by default.
1111 #
1112 #auto_update_depth "3"
1113 #
1114 ###############################################################################
1115
1116
1117 # Symbolic link behavior ######################################################
1118 #
1119 # If this setting is set to "yes", MPD will discover audio files by following
1120 # symbolic links outside of the configured music_directory.
1121 #
1122 #follow_outside_symlinks        "yes"
1123 #
1124 # If this setting is set to "yes", MPD will discover audio files by following
1125 # symbolic links inside of the configured music_directory.
1126 #
1127 #follow_inside_symlinks         "yes"
1128 #
1129 ###############################################################################
1130
1131
1132 # Zeroconf / Avahi Service Discovery ##########################################
1133 #
1134 # If this setting is set to "yes", service information will be published with
1135 # Zeroconf / Avahi.
1136 #
1137 #zeroconf_enabled               "yes"
1138 #
1139 # The argument to this setting will be the Zeroconf / Avahi unique name for
1140 # this MPD server on the network.
1141 #
1142 #zeroconf_name                  "Music Player"
1143 #
1144 ###############################################################################
1145
1146
1147 # Permissions #################################################################
1148 #
1149 # If this setting is set, MPD will require password authorization. The password
1150 # setting can be specified multiple times for different password profiles.
1151 #
1152 #password                        "password@read,add,control,admin"
1153 #
1154 # This setting specifies the permissions a user has who has not yet logged in.
1155 #
1156 #default_permissions             "read,add,control,admin"
1157 #
1158 ###############################################################################
1159
1160
1161 # Database #######################################################################
1162 #
1163
1164 #database {
1165 #       plugin "proxy"
1166 #       host "other.mpd.host"
1167 #       port "6600"
1168 #}
1169
1170 # Input #######################################################################
1171 #
1172
1173 input {
1174         plugin "curl"
1175 #       proxy "proxy.isp.com:8080"
1176 #       proxy_user "user"
1177 #       proxy_password "password"
1178 }
1179
1180 #
1181 ###############################################################################
1182
1183 # Audio Output ################################################################
1184 #
1185
1186 audio_output {
1187     type    "pulse"
1188     name    "pulse audio"
1189 }
1190
1191 audio_output {
1192     type    "fifo"
1193     name    "my_fifo"
1194     path    "/tmp/mpd.fifo"
1195     format  "44100:16:2"
1196 }
1197
1198 # MPD supports various audio output types, as well as playing through multiple
1199 # audio outputs at the same time, through multiple audio_output settings
1200 # blocks. Setting this block is optional, though the server will only attempt
1201 # autodetection for one sound card.
1202 #
1203 # An example of an ALSA output:
1204 #
1205 #audio_output {
1206 #       type            "alsa"
1207 #       name            "My ALSA Device"
1208 ##      device          "hw:0,0"        # optional
1209 ##      mixer_type      "hardware"      # optional
1210 ##      mixer_device    "default"       # optional
1211 ##      mixer_control   "PCM"           # optional
1212 ##      mixer_index     "0"             # optional
1213 #}
1214 #
1215 # An example of an OSS output:
1216 #
1217 #audio_output {
1218 #       type            "oss"
1219 #       name            "My OSS Device"
1220 ##      device          "/dev/dsp"      # optional
1221 ##      mixer_type      "hardware"      # optional
1222 ##      mixer_device    "/dev/mixer"    # optional
1223 ##      mixer_control   "PCM"           # optional
1224 #}
1225 #
1226 # An example of a shout output (for streaming to Icecast):
1227 #
1228 #audio_output {
1229 #       type            "shout"
1230 #       encoder         "vorbis"                # optional
1231 #       name            "My Shout Stream"
1232 #       host            "localhost"
1233 #       port            "8000"
1234 #       mount           "/mpd.ogg"
1235 #       password        "hackme"
1236 #       quality         "5.0"
1237 #       bitrate         "128"
1238 #       format          "44100:16:1"
1239 ##      protocol        "icecast2"              # optional
1240 ##      user            "source"                # optional
1241 ##      description     "My Stream Description" # optional
1242 ##      url             "http://example.com"    # optional
1243 ##      genre           "jazz"                  # optional
1244 ##      public          "no"                    # optional
1245 ##      timeout         "2"                     # optional
1246 ##      mixer_type      "software"              # optional
1247 #}
1248 #
1249 # An example of a recorder output:
1250 #
1251 #audio_output {
1252 #       type            "recorder"
1253 #       name            "My recorder"
1254 #       encoder         "vorbis"                # optional, vorbis or lame
1255 #       path            "/var/lib/mpd/recorder/mpd.ogg"
1256 ##      quality         "5.0"                   # do not define if bitrate is defined
1257 #       bitrate         "128"                   # do not define if quality is defined
1258 #       format          "44100:16:1"
1259 #}
1260 #
1261 # An example of a httpd output (built-in HTTP streaming server):
1262 #
1263 #audio_output {
1264 #       type            "httpd"
1265 #       name            "My HTTP Stream"
1266 #       encoder         "vorbis"                # optional, vorbis or lame
1267 #       port            "8000"
1268 #       bind_to_address "0.0.0.0"               # optional, IPv4 or IPv6
1269 ##      quality         "5.0"                   # do not define if bitrate is defined
1270 #       bitrate         "128"                   # do not define if quality is defined
1271 #       format          "44100:16:1"
1272 #       max_clients     "0"                     # optional 0=no limit
1273 #}
1274 #
1275 # An example of a pulseaudio output (streaming to a remote pulseaudio server)
1276 #
1277 #audio_output {
1278 #       type            "pulse"
1279 #       name            "My Pulse Output"
1280 ##      server          "remote_server"         # optional
1281 ##      sink            "remote_server_sink"    # optional
1282 #}
1283 #
1284 # An example of a winmm output (Windows multimedia API).
1285 #
1286 #audio_output {
1287 #       type            "winmm"
1288 #       name            "My WinMM output"
1289 ##      device          "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1290 #               or
1291 ##      device          "0"             # optional
1292 ##      mixer_type      "hardware"      # optional
1293 #}
1294 #
1295 # An example of an openal output.
1296 #
1297 #audio_output {
1298 #       type            "openal"
1299 #       name            "My OpenAL output"
1300 ##      device          "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1301 #}
1302 #
1303 # An example of an sndio output.
1304 #
1305 #audio_output {
1306 #       type            "sndio"
1307 #       name            "sndio output"
1308 #       mixer_type      "software"
1309 #}
1310 #
1311 # An example of an OS X output:
1312 #
1313 #audio_output {
1314 #       type            "osx"
1315 #       name            "My OS X Device"
1316 ##      device          "Built-in Output"       # optional
1317 ##      channel_map      "-1,-1,0,1"    # optional
1318 #}
1319 #
1320 ## Example "pipe" output:
1321 #
1322 #audio_output {
1323 #       type            "pipe"
1324 #       name            "my pipe"
1325 #       command         "aplay -f cd 2>/dev/null"
1326 ## Or if you're want to use AudioCompress
1327 #       command         "AudioCompress -m | aplay -f cd 2>/dev/null"
1328 ## Or to send raw PCM stream through PCM:
1329 #       command         "nc example.org 8765"
1330 #       format          "44100:16:2"
1331 #}
1332 #
1333 ## An example of a null output (for no audio output):
1334 #
1335 #audio_output {
1336 #       type            "null"
1337 #       name            "My Null Output"
1338 #       mixer_type      "none"                  # optional
1339 #}
1340 #
1341 ###############################################################################
1342
1343
1344 # Normalization automatic volume adjustments ##################################
1345 #
1346 # This setting specifies the type of ReplayGain to use. This setting can have
1347 # the argument "off", "album", "track" or "auto". "auto" is a special mode that
1348 # chooses between "track" and "album" depending on the current state of
1349 # random playback. If random playback is enabled then "track" mode is used.
1350 # See <http://www.replaygain.org> for more details about ReplayGain.
1351 # This setting is off by default.
1352 #
1353 #replaygain                     "album"
1354 #
1355 # This setting sets the pre-amp used for files that have ReplayGain tags. By
1356 # default this setting is disabled.
1357 #
1358 #replaygain_preamp              "0"
1359 #
1360 # This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1361 # By default this setting is disabled.
1362 #
1363 #replaygain_missing_preamp      "0"
1364 #
1365 # This setting enables or disables ReplayGain limiting.
1366 # MPD calculates actual amplification based on the ReplayGain tags
1367 # and replaygain_preamp / replaygain_missing_preamp setting.
1368 # If replaygain_limit is enabled MPD will never amplify audio signal
1369 # above its original level. If replaygain_limit is disabled such amplification
1370 # might occur. By default this setting is enabled.
1371 #
1372 #replaygain_limit               "yes"
1373 #
1374 # This setting enables on-the-fly normalization volume adjustment. This will
1375 # result in the volume of all playing audio to be adjusted so the output has
1376 # equal "loudness". This setting is disabled by default.
1377 #
1378 #volume_normalization           "no"
1379 #
1380 ###############################################################################
1381
1382 # Character Encoding ##########################################################
1383 #
1384 # If file or directory names do not display correctly for your locale then you
1385 # may need to modify this setting.
1386 #
1387 #filesystem_charset             "UTF-8"
1388 #
1389 ###############################################################################
1390 #+end_src
1391
1392 ** msmtp
1393 :PROPERTIES:
1394 :header-args+: :tangle ~/.msmtprc
1395 :END:
1396
1397 #+begin_src conf
1398 # Set default values for all following accounts.
1399 defaults
1400 port 587
1401 tls on
1402 auth on
1403 #tls_trust_file /etc/ssl/certs/ca-certificates.crt
1404 logfile ~/.msmtp.log
1405
1406 # aminb
1407 account aminb
1408 host nix.aminb.org
1409 tls_fingerprint 65:DD:B8:32:D8:CD:F1:DC:B6:34:EE:35:04:18:AC:09:F3:1D:6D:20:F2:4A:E2:BD:64:48:B7:1F:90:BD:C4:BA
1410 tls_starttls on
1411 from amin@aminb.org
1412 user amin@aminb.org
1413 passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
1414
1415 # gnu
1416 account gnu
1417 host fencepost.gnu.org
1418 # use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1419 tls_fingerprint 28:70:42:76:1C:EC:91:5F:D1:B3:27:A1:CD:3B:32:A4:8B:0B:DC:3A:CD:CA:F6:6F:E4:61:BA:69:D7:4D:0D:0B
1420 tls_starttls on
1421 from aminb@gnu.org
1422 user aminb
1423 passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
1424
1425 # uwaterloo
1426 account uwaterloo
1427 host connect.uwaterloo.ca
1428 tls_starttls on
1429 from abandali@uwaterloo.ca
1430 user abandali
1431 passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
1432 tls_trust_file /etc/ssl/certs/ca-certificates.crt
1433
1434 # uwaterloo (friendly address)
1435 account uwaterloo-friendly : uwaterloo
1436 from amin.bandali@uwaterloo.ca
1437
1438 # Set a default account
1439 account default : aminb
1440 #+end_src
1441
1442 ** ncmpcpp
1443
1444 *** config
1445 :PROPERTIES:
1446 :header-args+: :tangle ~/.ncmpcpp/config
1447 :END:
1448
1449 #+begin_src conf :tangle no
1450 ##############################################################
1451 ## This is the example configuration file. Copy it to       ##
1452 ## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
1453 ## and set up your preferences.                             ##
1454 ##############################################################
1455 #
1456 ##### directories ######
1457 ##
1458 ## Directory for storing ncmpcpp related files.
1459 ## Changing it is useful if you want to store
1460 ## everything somewhere else and provide command
1461 ## line setting for alternative location to config
1462 ## file which defines that while launching ncmpcpp.
1463 ##
1464 #
1465 ncmpcpp_directory = ~/.ncmpcpp
1466 #
1467 ##
1468 ## Directory for storing downloaded lyrics. It
1469 ## defaults to ~/.lyrics since other MPD clients
1470 ## (eg. ncmpc) also use that location.
1471 ##
1472 #
1473 #lyrics_directory = ~/.lyrics
1474 #
1475 ##### connection settings #####
1476 #
1477 #mpd_host = localhost
1478 #
1479 #mpd_port = 6600
1480 #
1481 #mpd_connection_timeout = 5
1482 #
1483 ## Needed for tag editor and file operations to work.
1484 ##
1485 mpd_music_dir = ~/usr/music
1486 #
1487 #mpd_crossfade_time = 5
1488 #
1489 ##### music visualizer #####
1490 ##
1491 ## Note: In order to make music visualizer work you'll
1492 ## need to use mpd fifo output, whose format parameter
1493 ## has to be set to 44100:16:1 for mono visualization
1494 ## or 44100:16:2 for stereo visualization. Example
1495 ## configuration (it has to be put into mpd.conf):
1496 ##
1497 ## audio_output {
1498 ##        type            "fifo"
1499 ##        name            "Visualizer feed"
1500 ##        path            "/tmp/mpd.fifo"
1501 ##        format          "44100:16:2"
1502 ## }
1503 ##
1504 #
1505 visualizer_fifo_path = /tmp/mpd.fifo
1506 #
1507 ##
1508 ## Note: Below parameter is needed for ncmpcpp
1509 ## to determine which output provides data for
1510 ## visualizer and thus allow syncing between
1511 ## visualization and sound as currently there
1512 ## are some problems with it.
1513 ##
1514 #
1515 visualizer_output_name = my fifo
1516 #
1517 ##
1518 ## If you set format to 44100:16:2, make it 'yes'.
1519 ##
1520 visualizer_in_stereo = yes
1521 #
1522 ##
1523 ## Multiply received samples by given value. Very
1524 ## useful for proper visualization of quiet music.
1525 ##
1526 #visualizer_sample_multiplier = 1
1527 #
1528 ##
1529 ## Note: Below parameter defines how often ncmpcpp
1530 ## has to "synchronize" visualizer and audio outputs.
1531 ## 30 seconds is optimal value, but if you experience
1532 ## synchronization problems, set it to lower value.
1533 ## Keep in mind that sane values start with >=10.
1534 ##
1535 #
1536 visualizer_sync_interval = 30
1537 #
1538 ##
1539 ## Note: To enable spectrum frequency visualization
1540 ## you need to compile ncmpcpp with fftw3 support.
1541 ##
1542 #
1543 ## Available values: spectrum, wave, wave_filled, ellipse.
1544 ##
1545 visualizer_type = spectrum
1546 #
1547 #visualizer_look = ●▮
1548 visualizer_look = "●•"
1549 #
1550 #visualizer_color = blue, cyan, green, yellow, magenta, red
1551 #
1552 ## Alternative subset of 256 colors for terminals that support it.
1553 ##
1554 #visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
1555 #
1556 ##### system encoding #####
1557 ##
1558 ## ncmpcpp should detect your charset encoding
1559 ## but if it failed to do so, you can specify
1560 ## charset encoding you are using here.
1561 ##
1562 ## Note: You can see whether your ncmpcpp build
1563 ## supports charset detection by checking output
1564 ## of `ncmpcpp --version`.
1565 ##
1566 ## Note: Since MPD uses UTF-8 by default, setting
1567 ## this option makes sense only if your encoding
1568 ## is different.
1569 ##
1570 #
1571 #system_encoding = ""
1572 #
1573 ##### delays #####
1574 #
1575 ## Time of inactivity (in seconds) after playlist
1576 ## highlighting will be disabled (0 = always on).
1577 ##
1578 #playlist_disable_highlight_delay = 5
1579 #
1580 ## Defines how long messages are supposed to be visible.
1581 ##
1582 #message_delay_time = 5
1583 #
1584 ##### song format #####
1585 ##
1586 ## For a song format you can use:
1587 ##
1588 ## %l - length
1589 ## %f - filename
1590 ## %D - directory
1591 ## %a - artist
1592 ## %A - album artist
1593 ## %t - title
1594 ## %b - album
1595 ## %y - date
1596 ## %n - track number (01/12 -> 01)
1597 ## %N - full track info (01/12 -> 01/12)
1598 ## %g - genre
1599 ## %c - composer
1600 ## %p - performer
1601 ## %d - disc
1602 ## %C - comment
1603 ## %P - priority
1604 ## $R - begin right alignment
1605 ##
1606 ## If you want to make sure that a part of the format is displayed
1607 ## only when certain tags are present, you can archieve it by
1608 ## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
1609 ## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
1610 ## It is also possible to define a list of alternatives by providing
1611 ## several groups and separating them with '|', e.g. '{%t}|{%f}'
1612 ## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
1613 ## present.
1614 ##
1615 ## Note: If you want to set limit on maximal length of a tag, just
1616 ## put the appropriate number between % and character that defines
1617 ## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
1618 ##
1619 ## In addition, formats support markers used for text attributes.
1620 ## They are followed by character '$'. After that you can put:
1621 ##
1622 ## - 0 - default window color (discards all other colors)
1623 ## - 1 - black
1624 ## - 2 - red
1625 ## - 3 - green
1626 ## - 4 - yellow
1627 ## - 5 - blue
1628 ## - 6 - magenta
1629 ## - 7 - cyan
1630 ## - 8 - white
1631 ## - 9 - end of current color
1632 ## - b - bold text
1633 ## - u - underline text
1634 ## - r - reverse colors
1635 ## - a - use alternative character set
1636 ##
1637 ## If you don't want to use a non-color attribute anymore, just put it
1638 ## again, but this time insert character '/' between '$' and attribute
1639 ## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
1640 ## or filename with reversed colors.
1641 ##
1642 ## If you want to use 256 colors and/or background colors in formats
1643 ## (the naming scheme is described below in section about color
1644 ## definitions), it can be done with the syntax $(COLOR), e.g. to set
1645 ## the artist tag to one of the non-standard colors and make it have
1646 ## yellow background, you need to write $(197_yellow)%a$(end). Note
1647 ## that for standard colors this is interchangable with attributes
1648 ## listed above.
1649 ##
1650 ## Note: colors can be nested.
1651 ##
1652 #
1653 #song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
1654 #
1655 #song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
1656 #
1657 #song_library_format = {%n - }{%t}|{%f}
1658 #
1659 #
1660 #alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
1661 #
1662 #alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
1663 #
1664 #now_playing_prefix = $b
1665 #
1666 #now_playing_suffix = $/b
1667 #
1668 #browser_playlist_prefix = "$2playlist$9 "
1669 #
1670 #selected_item_prefix = $6
1671 #
1672 #selected_item_suffix = $9
1673 #
1674 #modified_item_prefix = $3> $9
1675 #
1676 ##
1677 ## Note: attributes are not supported for the following variables.
1678 ##
1679 #song_window_title_format = {%a - }{%t}|{%f}
1680 ##
1681 ## Note: Below variables are used for sorting songs in browser.
1682 ## The sort mode determines how songs are sorted, and can be used
1683 ## in combination with a sort format to specify a custom sorting format.
1684 ## Available values for browser_sort_mode are "name", "mtime", "format"
1685 ## and "noop".
1686 ##
1687 #
1688 #browser_sort_mode = name
1689 #
1690 #browser_sort_format = {%a - }{%t}|{%f} {(%l)}
1691 #
1692 ##### columns settings #####
1693 ##
1694 ## syntax of song columns list format is "column column etc."
1695 ##
1696 ## - syntax for each column is:
1697 ##
1698 ## (width of the column)[color of the column]{displayed tag}
1699 ##
1700 ## Note: Width is by default in %, if you want a column to
1701 ## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
1702 ## will be the column that take 10% of screen (so the real width
1703 ## will depend on actual screen size), whereas (10f)[white]{a}
1704 ## will take 10 terminal cells, no matter how wide the screen is.
1705 ##
1706 ## - color is optional (if you want the default one,
1707 ##   leave the field empty).
1708 ##
1709 ## Note: You can give a column additional attributes by putting appropriate
1710 ## character after displayed tag character. Available attributes are:
1711 ##
1712 ## - r - column will be right aligned
1713 ## - E - if tag is empty, empty tag marker won't be displayed
1714 ##
1715 ## You can also:
1716 ##
1717 ## - give a column custom name by putting it after attributes,
1718 ##   separated with character ':', e.g. {lr:Length} gives you
1719 ##   right aligned column of lengths named "Length".
1720 ##
1721 ## - define sequence of tags, that have to be displayed in case
1722 ##   predecessor is empty in a way similar to the one in classic
1723 ##   song format, i.e. using '|' character, e.g. {a|c|p:Owner}
1724 ##   creates column named "Owner" that tries to display artist
1725 ##   tag and then composer and performer if previous ones are
1726 ##   not available.
1727 ##
1728 #
1729 #song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
1730 #
1731 ##### various settings #####
1732 #
1733 ##
1734 ## Note: Custom command that will be executed each
1735 ## time song changes. Useful for notifications etc.
1736 ##
1737 #execute_on_song_change = ""
1738 #
1739 #playlist_show_mpd_host = no
1740 #
1741 #playlist_show_remaining_time = no
1742 #
1743 #playlist_shorten_total_times = no
1744 #
1745 #playlist_separate_albums = no
1746 #
1747 ##
1748 ## Note: Possible display modes: classic, columns.
1749 ##
1750 #playlist_display_mode = columns
1751 #
1752 #browser_display_mode = classic
1753 #
1754 #search_engine_display_mode = classic
1755 #
1756 #playlist_editor_display_mode = classic
1757 #
1758 #discard_colors_if_item_is_selected = yes
1759 #
1760 #incremental_seeking = yes
1761 #
1762 #seek_time = 1
1763 #
1764 #volume_change_step = 2
1765 #
1766 #autocenter_mode = no
1767 #
1768 #centered_cursor = no
1769 #
1770 ##
1771 ## Note: You can specify third character which will
1772 ## be used to build 'empty' part of progressbar.
1773 ##
1774 #progressbar_look = =>
1775 progressbar_look = "─╼╶"
1776 #progressbar_look = "─⊙╶"
1777 #
1778 #progressbar_boldness = yes
1779 #
1780 ## Available values: database, playlist.
1781 ##
1782 #default_place_to_search_in = database
1783 #
1784 ## Available values: classic, alternative.
1785 ##
1786 #user_interface = classic
1787 #
1788 #data_fetching_delay = yes
1789 #
1790 ## Available values: artist, album_artist, date, genre, composer, performer.
1791 ##
1792 #media_library_primary_tag = artist
1793 #
1794 ## Available values: wrapped, normal.
1795 ##
1796 #default_find_mode = wrapped
1797 #
1798 #default_tag_editor_pattern = %n - %t
1799 #
1800 #header_visibility = yes
1801 #
1802 #statusbar_visibility = yes
1803 #
1804 #titles_visibility = yes
1805 #
1806 #header_text_scrolling = yes
1807 #
1808 #cyclic_scrolling = no
1809 #
1810 #lines_scrolled = 2
1811 #
1812 #follow_now_playing_lyrics = no
1813 #
1814 #fetch_lyrics_for_current_song_in_background = no
1815 #
1816 #store_lyrics_in_song_dir = no
1817 #
1818 #generate_win32_compatible_filenames = yes
1819 #
1820 #allow_for_physical_item_deletion = no
1821 #
1822 ##
1823 ## Note: If you set this variable, ncmpcpp will try to
1824 ## get info from last.fm in language you set and if it
1825 ## fails, it will fall back to english. Otherwise it will
1826 ## use english the first time.
1827 ##
1828 ## Note: Language has to be expressed as an ISO 639 alpha-2 code.
1829 ##
1830 #lastfm_preferred_language = en
1831 #
1832 #show_hidden_files_in_local_browser = no
1833 #
1834 ##
1835 ## How shall screen switcher work?
1836 ##
1837 ## - "previous" - switch between the current and previous screen.
1838 ## - "screen1,...,screenN" - switch between given sequence of screens.
1839 ##
1840 ## Screens available for use: help, playlist, browser, search_engine,
1841 ## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
1842 ##
1843 #screen_switcher_mode = playlist, browser
1844 #
1845 ##
1846 ## Note: You can define startup screen
1847 ## by choosing screen from the list above.
1848 ##
1849 #startup_screen = playlist
1850 #
1851 ##
1852 ## Note: You can define startup slave screen
1853 ## by choosing screen from the list above or
1854 ## an empty value for no slave screen.
1855 ##
1856 #startup_slave_screen = ""
1857 #
1858 #startup_slave_screen_focus = no
1859 #
1860 ##
1861 ## Default width of locked screen (in %).
1862 ## Acceptable values are from 20 to 80.
1863 ##
1864 #
1865 #locked_screen_width_part = 50
1866 #
1867 #ask_for_locked_screen_width_part = yes
1868 #
1869 #jump_to_now_playing_song_at_start = yes
1870 #
1871 #ask_before_clearing_playlists = yes
1872 #
1873 #clock_display_seconds = no
1874 #
1875 #display_volume_level = yes
1876 #
1877 #display_bitrate = no
1878 #
1879 #display_remaining_time = no
1880 #
1881 ## Available values: none, basic, extended, perl.
1882 ##
1883 #regular_expressions = perl
1884 #
1885 ##
1886 ## Note: If below is enabled, ncmpcpp will ignore leading
1887 ## "The" word while sorting items in browser, tags in
1888 ## media library, etc.
1889 ##
1890 #ignore_leading_the = no
1891 #
1892 #block_search_constraints_change_if_items_found = yes
1893 #
1894 #mouse_support = yes
1895 #
1896 #mouse_list_scroll_whole_page = yes
1897 #
1898 #empty_tag_marker = <empty>
1899 #
1900 #tags_separator = " | "
1901 #
1902 #tag_editor_extended_numeration = no
1903 #
1904 #media_library_sort_by_mtime = no
1905 #
1906 #enable_window_title = yes
1907 #
1908 ##
1909 ## Note: You can choose default search mode for search
1910 ## engine. Available modes are:
1911 ##
1912 ## - 1 - use mpd built-in searching (no regexes, pattern matching)
1913 ## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
1914 ##       but if your mpd is on a remote machine, downloading big database
1915 ##       to process it can take a while
1916 ## - 3 - match only exact values (this mode uses mpd function for searching
1917 ##       in database and local one for searching in current playlist)
1918 ##
1919 #
1920 #search_engine_default_search_mode = 1
1921 #
1922 #external_editor = nano
1923 #
1924 ## Note: set to yes if external editor is a console application.
1925 ##
1926 #use_console_editor = yes
1927 #
1928 ##### colors definitions #####
1929 ##
1930 ## It is possible to set a background color by setting a color
1931 ## value "<foreground>_<background>", e.g. red_black will set
1932 ## foregound color to red and background color to black.
1933 ##
1934 ## In addition, for terminals that support 256 colors it
1935 ## is possible to set one of them by using a number in range
1936 ## [1, 256] instead of color name, e.g. numerical value
1937 ## corresponding to red_black is 2_1. To find out if the
1938 ## terminal supports 256 colors, run ncmpcpp and check out
1939 ## the bottom of the help screen for list of available colors
1940 ## and their numerical values.
1941 ##
1942 ## Note: due to technical limitations of ncurses, if 256 colors
1943 ## are used, it is possible to either use only the colors with
1944 ## default background color, or all pairs from 1_1 up to 254_127,
1945 ## depending on the ncurses version used.
1946 ##
1947 #
1948 #colors_enabled = yes
1949 #
1950 #empty_tag_color = cyan
1951 #
1952 #header_window_color = default
1953 #
1954 #volume_color = default
1955 #
1956 #state_line_color = default
1957 #
1958 #state_flags_color = default
1959 #
1960 #main_window_color = yellow
1961 #
1962 #color1 = white
1963 #
1964 #color2 = green
1965 #
1966 #main_window_highlight_color = yellow
1967 #
1968 #progressbar_color = black
1969 #
1970 #progressbar_elapsed_color = green
1971 #
1972 #statusbar_color = default
1973 #
1974 #alternative_ui_separator_color = black
1975 #
1976 #active_column_color = red
1977 #
1978 #window_border_color = green
1979 #
1980 #active_window_border = red
1981 #
1982 #+end_src
1983
1984 *** bindings
1985 :PROPERTIES:
1986 :header-args+: :tangle ~/.ncmpcpp/bindings
1987 :END:
1988
1989 #+begin_src conf :tangle no
1990 def_key "j"
1991     scroll_down
1992 def_key "k"
1993     scroll_up
1994
1995 def_key "ctrl-u"
1996     page_up
1997 def_key "ctrl-d"
1998     page_down
1999
2000 def_key "h"
2001     previous_column
2002 def_key "l"
2003     next_column
2004
2005 def_key "."
2006     show_lyrics
2007
2008 def_key "n"
2009     next_found_item
2010 def_key "N"
2011     previous_found_item
2012
2013 def_key "J"
2014     move_sort_order_down
2015 def_key "K"
2016     move_sort_order_up
2017 #+end_src
2018
2019 ** notmuch
2020
2021 *** notmuch-config
2022 :PROPERTIES:
2023 :header-args+: :tangle ~/.notmuch-config
2024 :END:
2025
2026 #+begin_src conf
2027 # .notmuch-config - Configuration file for the notmuch mail system
2028 #
2029 # For more information about notmuch, see https://notmuchmail.org
2030
2031 # Database configuration
2032 #
2033 # The only value supported here is 'path' which should be the top-level
2034 # directory where your mail currently exists and to where mail will be
2035 # delivered in the future. Files should be individual email messages.
2036 # Notmuch will store its database within a sub-directory of the path
2037 # configured here named ".notmuch".
2038 #
2039 [database]
2040 path=/home/amin/mail
2041
2042 # User configuration
2043 #
2044 # Here is where you can let notmuch know how you would like to be
2045 # addressed. Valid settings are
2046 #
2047 #       name            Your full name.
2048 #       primary_email   Your primary email address.
2049 #       other_email     A list (separated by ';') of other email addresses
2050 #                       at which you receive email.
2051 #
2052 # Notmuch will use the various email addresses configured here when
2053 # formatting replies. It will avoid including your own addresses in the
2054 # recipient list of replies, and will set the From address based on the
2055 # address to which the original email was addressed.
2056 #
2057 [user]
2058 name=Amin Bandali
2059 primary_email=amin@aminb.org
2060 other_email=abandali@uwaterloo.ca;amin.bandali@uwaterloo.ca;aminb@gnu.org;
2061
2062 # Configuration for "notmuch new"
2063 #
2064 # The following options are supported here:
2065 #
2066 #       tags    A list (separated by ';') of the tags that will be
2067 #               added to all messages incorporated by "notmuch new".
2068 #
2069 #       ignore  A list (separated by ';') of file and directory names
2070 #               that will not be searched for messages by "notmuch new".
2071 #
2072 #               NOTE: *Every* file/directory that goes by one of those
2073 #               names will be ignored, independent of its depth/location
2074 #               in the mail store.
2075 #
2076 [new]
2077 tags=new;
2078 #tags=unread;inbox;
2079 ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
2080
2081 # Search configuration
2082 #
2083 # The following option is supported here:
2084 #
2085 #       exclude_tags
2086 #               A ;-separated list of tags that will be excluded from
2087 #               search results by default.  Using an excluded tag in a
2088 #               query will override that exclusion.
2089 #
2090 [search]
2091 exclude_tags=deleted;spam;
2092
2093 # Maildir compatibility configuration
2094 #
2095 # The following option is supported here:
2096 #
2097 #       synchronize_flags      Valid values are true and false.
2098 #
2099 #       If true, then the following maildir flags (in message filenames)
2100 #       will be synchronized with the corresponding notmuch tags:
2101 #
2102 #               Flag    Tag
2103 #               ----    -------
2104 #               D       draft
2105 #               F       flagged
2106 #               P       passed
2107 #               R       replied
2108 #               S       unread (added when 'S' flag is not present)
2109 #
2110 #       The "notmuch new" command will notice flag changes in filenames
2111 #       and update tags, while the "notmuch tag" and "notmuch restore"
2112 #       commands will notice tag changes and update flags in filenames
2113 #
2114 [maildir]
2115 synchronize_flags=true
2116
2117 # Cryptography related configuration
2118 #
2119 # The following option is supported here:
2120 #
2121 #       gpg_path
2122 #               binary name or full path to invoke gpg.
2123 #
2124 [crypto]
2125 gpg_path=gpg
2126 #+end_src
2127
2128 *** pre-new hook
2129 :PROPERTIES:
2130 :header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
2131 :END:
2132
2133 #+begin_src sh
2134 touch /tmp/gnusieve.log
2135 sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
2136              -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
2137 #+end_src
2138
2139 *** post-new hook
2140 :PROPERTIES:
2141 :header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
2142 :END:
2143
2144 #+begin_src sh
2145 # apply sent tag to messages sent by me
2146 notmuch tag -new +sent -- from:amin@aminb.org or from:aminb@gnu.org or from:abandali@uwaterloo.ca or from:amin.bandali@uwaterloo.ca
2147
2148 # initial tagging
2149 notmuch tag -latest -- tag:latest
2150 notmuch tag +inbox +unread +latest -new -- tag:new
2151
2152
2153 # apply tags to lists
2154
2155 # <aminb>
2156 notmuch tag -inbox +lists/~sircmpwn/srht-admins   -- folder:amin/lists/~sircmpwn/srht-admins
2157 notmuch tag -inbox +lists/~sircmpwn/srht-announce -- folder:amin/lists/~sircmpwn/srht-announce
2158 notmuch tag -inbox +lists/~sircmpwn/srht-dev      -- folder:amin/lists/~sircmpwn/srht-dev
2159 notmuch tag -inbox +lists/~sircmpwn/srht-discuss  -- folder:amin/lists/~sircmpwn/srht-discuss
2160
2161 notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
2162 notmuch tag -inbox +lists/haskell-weekly   -- folder:amin/lists/haskell-weekly
2163
2164 notmuch tag -inbox +pay -- folder:amin/pay
2165 # </aminb>
2166
2167 # <uw>
2168 notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
2169 notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
2170
2171 notmuch tag -inbox +lists/clvsingle        -- folder:uwaterloo/lists/Clvsingle
2172 notmuch tag -inbox +lists/gsa              -- folder:uwaterloo/lists/GSA
2173 notmuch tag -inbox +lists/math-grad        -- folder:uwaterloo/lists/Math-grad
2174 notmuch tag -inbox +lists/scs-grads        -- folder:uwaterloo/lists/scs-grads
2175 notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
2176 # </uw>
2177
2178 # <gnu>
2179 notmuch tag -inbox +lists/emacs-devel       -- folder:gnu/l/emacs-devel
2180 notmuch tag -inbox +lists/emacs-orgmode     -- folder:gnu/l/emacs-orgmode
2181 notmuch tag -inbox +lists/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
2182 notmuch tag -inbox +lists/fencepost-users   -- folder:gnu/l/fencepost-users
2183 notmuch tag -inbox +lists/guix-devel        -- folder:gnu/l/guix-devel
2184 notmuch tag -inbox +lists/guile-devel       -- folder:gnu/l/guile-devel
2185 notmuch tag -inbox +lists/help-gnu-emacs    -- folder:gnu/l/help-gnu-emacs
2186 notmuch tag -inbox +lists/info-gnu-emacs    -- folder:gnu/l/info-gnu-emacs
2187 notmuch tag -inbox +lists/www-commits       -- folder:gnu/l/www-commits
2188 notmuch tag -inbox +lists/www-discuss       -- folder:gnu/l/www-discuss
2189 notmuch tag -inbox +webmasters              -- folder:gnu/webmasters
2190
2191 notmuch tag -inbox +lists/deepspec          -- folder:gnu/l/deepspec
2192 notmuch tag -inbox +lists/haskell-cafe      -- folder:gnu/l/haskell-cafe
2193 notmuch tag -inbox +lists/haskell-art       -- folder:gnu/l/haskell-art
2194 notmuch tag -inbox +lists/notmuch           -- folder:gnu/l/notmuch
2195 # </gnu>
2196
2197 notmuch tag -inbox -unread +archive/notmuch     -- path:archive/notmuch/**
2198 notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**
2199 #+end_src
2200
2201 *** notmuch.service
2202 :PROPERTIES:
2203 :header-args+: :tangle ~/.config/systemd/user/notmuch.service
2204 :END:
2205
2206 #+begin_src conf :tangle no
2207 [Unit]
2208 Description=notmuch service
2209
2210 [Service]
2211 Type=oneshot
2212 ExecStart=/usr/bin/notmuch new
2213 StandardOutput=syslog
2214 StandardError=syslog
2215 #+end_src
2216
2217 *** notmuch.timer
2218 :PROPERTIES:
2219 :header-args+: :tangle ~/.config/systemd/user/notmuch.timer
2220 :END:
2221
2222 #+begin_src conf :tangle no
2223 [Unit]
2224 Description=notmuch timer
2225
2226 [Timer]
2227 OnCalendar=*:0/5
2228 Persistent=true
2229 Unit=notmuch.service
2230
2231 [Install]
2232 WantedBy=timers.target
2233 #+end_src
2234
2235 ** offlineimap
2236
2237 *** offlineimaprc
2238 :PROPERTIES:
2239 :header-args+: :tangle ~/.offlineimaprc
2240 :END:
2241
2242 #+begin_src conf :tangle no
2243 [general]
2244 pythonfile = ~/.offlineimap.py
2245 accounts = Gmail, aminb
2246 maxsyncaccounts = 3
2247
2248 [Account Gmail]
2249 localrepository = GmailL
2250 remoterepository = GmailR
2251
2252 [Account aminb]
2253 localrepository = aminbL
2254 remoterepository = aminbR
2255
2256 [Repository GmailL]
2257 type = Maildir
2258 localfolders = ~/Maildir/Gmail
2259
2260 [Repository GmailR]
2261 type = IMAP
2262 remotehost = imap.gmail.com
2263 remoteusereval = mailuser("gmail")
2264 remotepasseval = mailpasswd("gmail")
2265 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2266 ssl = yes
2267 folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
2268 maxconnections = 1
2269 realdelete = no
2270
2271 [Repository aminbL]
2272 type = Maildir
2273 localfolders = ~/Maildir/aminb
2274
2275 [Repository aminbR]
2276 type = IMAP
2277 remotehost = mail.aminb.org
2278 remoteusereval = mailuser("aminb")
2279 remotepasseval = mailpasswd("aminb")
2280 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2281 ssl = yes
2282 folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
2283 maxconnections = 1
2284 realdelete = no
2285 #+end_src
2286
2287 *** offlineimap.py
2288 :PROPERTIES:
2289 :header-args+: :tangle ~/.offlineimap.py
2290 :END:
2291
2292 #+begin_src python :tangle no
2293 import os
2294 import subprocess
2295
2296 def mailpasswd(acct):
2297     acct = os.path.basename(acct)
2298     path = "/home/amin/.passwd/%s.gpg" % acct
2299     args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
2300     try:
2301         return subprocess.check_output(args).strip()
2302     except subprocess.CalledProcessError:
2303         return ""
2304
2305 def mailuser(acct):
2306     acct = os.path.basename(acct)
2307     path = "/home/amin/.passwd/%s" % acct
2308     args = ["cat", path]
2309     try:
2310         return subprocess.check_output(args).strip()
2311     except subprocess.CalledProcessError:
2312         return ""
2313
2314 def prime_gpg_agent():
2315   ret = False
2316   i = 1
2317   while not ret:
2318     ret = (mailpasswd("prime") == "prime")
2319     if i > 2:
2320       from offlineimap.ui import getglobalui
2321       sys.stderr.write("Error reading in passwords. Terminating.\n")
2322       getglobalui().terminate()
2323     i += 1
2324   return ret
2325
2326 prime_gpg_agent()
2327 #+end_src
2328
2329 ** pigeonhole
2330 *** gnu.sieve
2331 :PROPERTIES:
2332 :header-args+: :tangle ~/sieve/gnu.sieve :comments none
2333 :END:
2334
2335 #+begin_src conf
2336 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags", "include" ];
2337
2338 if anyof (
2339   address :is "from" "webmasters@gnu.org",
2340   address :is "from" "webmasters-comment@gnu.org") {
2341   fileinto :create "webmasters";
2342   stop;
2343 }
2344
2345 include :personal "lists";
2346 #+end_src
2347
2348 *** lists.sieve
2349 :PROPERTIES:
2350 :header-args+: :tangle ~/sieve/lists.sieve :comments none
2351 :END:
2352
2353 #+begin_src conf
2354 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags",
2355  "include" ];
2356
2357 if anyof (
2358     header :contains "list-id" "<emacs-devel.gnu.org>",
2359     header :contains "list-id" "<emacs-orgmode.gnu.org>",
2360     header :contains "list-id" "<emacsconf-discuss.gnu.org>",
2361     header :contains "list-id" "<fencepost-users.gnu.org>",
2362     header :contains "list-id" "<guix-devel.gnu.org>",
2363     header :contains "list-id" "<guile-devel.gnu.org>",
2364     header :contains "list-id" "<help-gnu-emacs.gnu.org>",
2365     header :contains "list-id" "<info-gnu-emacs.gnu.org>",
2366     header :contains "list-id" "<www-commits.gnu.org>",
2367     header :contains "list-id" "<www-discuss.gnu.org>",
2368     header :contains "list-id" "<deepspec.lists.cs.princeton.edu>",
2369     header :contains "list-id" "<haskell-cafe.haskell.org>",
2370     header :contains "list-id" "<haskell-art.we.lurk.org>",
2371     header :contains "list-id" "<notmuch.notmuchmail.org>") {
2372     if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
2373         set :lower "listname" "${1}";
2374         fileinto :create "l/${listname}";
2375     }
2376 }
2377 #+end_src
2378
2379 ** polybar
2380
2381 *** config
2382 :PROPERTIES:
2383 :header-args+: :tangle ~/.config/polybar/config
2384 :END:
2385
2386 #+begin_src conf :tangle no
2387 ;=====================================================
2388 ;
2389 ;   To learn more about how to configure Polybar
2390 ;   go to https://github.com/jaagr/polybar
2391 ;
2392 ;   The README contains alot of information
2393 ;
2394 ;=====================================================
2395
2396 [colors]
2397 ;background = ${xrdb:color0:#222}
2398 background = #222
2399 background-alt = #444
2400 ;foreground = ${xrdb:color7:#222}
2401 foreground = #eee
2402 foreground-alt = #888
2403 primary = #ffb52a
2404 secondary = #e60053
2405 alert = #bd2c40
2406
2407 [bar/main]
2408 ;monitor = ${env:MONITOR:HDMI-1}
2409 width = 100%
2410 height = 27
2411 ;offset-x = 1%
2412 ;offset-y = 1%
2413 radius = 3.0
2414 fixed-center = true
2415
2416 background = ${colors.background}
2417 foreground = ${colors.foreground}
2418
2419 line-size = 3
2420 line-color = #f00
2421
2422 border-size = 4
2423 border-color = #00000000
2424
2425 padding-left = 0
2426 padding-right = 2
2427
2428 module-margin-left = 2
2429 module-margin-right = 2
2430
2431 font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
2432 font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
2433 font-2 = Wuncon Siji:pixelsize=10;1
2434 font-3 = FontAwesome:pixelsize=10;1
2435
2436 modules-left = bspwm xwindow
2437 modules-center =
2438 modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
2439
2440 tray-position = right
2441 tray-padding = 1
2442 ;tray-transparent = true
2443 ;tray-background = #0063ff
2444 tray-maxsize = 18
2445
2446 wm-restack = bspwm
2447
2448 ;override-redirect = true
2449
2450 scroll-up = bspwm-desknext
2451 scroll-down = bspwm-deskprev
2452
2453 [module/xwindow]
2454 type = internal/xwindow
2455 label = %title:0:50:...%
2456
2457 [module/xkeyboard]
2458 type = internal/xkeyboard
2459 blacklist-0 = num lock
2460
2461 format-prefix = " "
2462 format-prefix-foreground = ${colors.foreground-alt}
2463 format-prefix-underline = ${colors.secondary}
2464
2465 label-layout = %layout%
2466 label-layout-underline = ${colors.secondary}
2467
2468 label-indicator-padding = 2
2469 label-indicator-margin = 1
2470 label-indicator-background = ${colors.secondary}
2471 label-indicator-underline = ${colors.secondary}
2472
2473 [module/filesystem]
2474 type = internal/fs
2475 interval = 25
2476
2477 mount-0 = /
2478
2479 label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
2480 label-unmounted = %mountpoint% not mounted
2481 label-unmounted-foreground = ${colors.foreground-alt}
2482
2483 [module/bspwm]
2484 type = internal/bspwm
2485
2486 label-focused = %index%
2487 label-focused-background = ${colors.background-alt}
2488 label-focused-underline= ${colors.primary}
2489 label-focused-padding = 2
2490
2491 label-occupied = %index%
2492 label-occupied-padding = 2
2493
2494 label-urgent = %index%!
2495 label-urgent-background = ${colors.alert}
2496 label-urgent-padding = 2
2497
2498 label-empty = %index%
2499 label-empty-foreground = ${colors.foreground-alt}
2500 label-empty-padding = 2
2501
2502 [module/i3]
2503 type = internal/i3
2504 format = <label-state> <label-mode>
2505 index-sort = true
2506 wrapping-scroll = false
2507
2508 ; Only show workspaces on the same output as the bar
2509 ;pin-workspaces = true
2510
2511 label-mode-padding = 2
2512 label-mode-foreground = #000
2513 label-mode-background = ${colors.primary}
2514
2515 ; focused = Active workspace on focused monitor
2516 label-focused = %index%
2517 label-focused-background = ${module/bspwm.label-focused-background}
2518 label-focused-underline = ${module/bspwm.label-focused-underline}
2519 label-focused-padding = ${module/bspwm.label-focused-padding}
2520
2521 ; unfocused = Inactive workspace on any monitor
2522 label-unfocused = %index%
2523 label-unfocused-padding = ${module/bspwm.label-occupied-padding}
2524
2525 ; visible = Active workspace on unfocused monitor
2526 label-visible = %index%
2527 label-visible-background = ${self.label-focused-background}
2528 label-visible-underline = ${self.label-focused-underline}
2529 label-visible-padding = ${self.label-focused-padding}
2530
2531 ; urgent = Workspace with urgency hint set
2532 label-urgent = %index%
2533 label-urgent-background = ${module/bspwm.label-urgent-background}
2534 label-urgent-padding = ${module/bspwm.label-urgent-padding}
2535
2536 [module/mpd]
2537 type = internal/mpd
2538 format-online = <label-song>  <icon-prev> <icon-stop> <toggle> <icon-next>
2539
2540 icon-prev = 
2541 icon-stop = 
2542 icon-play = 
2543 icon-pause = 
2544 icon-next = 
2545
2546 label-song-maxlen = 25
2547 label-song-ellipsis = true
2548
2549 [module/xbacklight]
2550 type = internal/xbacklight
2551
2552 format = <label> <bar>
2553 label = BL
2554
2555 bar-width = 10
2556 bar-indicator = |
2557 bar-indicator-foreground = #ff
2558 bar-indicator-font = 2
2559 bar-fill = ─
2560 bar-fill-font = 2
2561 bar-fill-foreground = #9f78e1
2562 bar-empty = ─
2563 bar-empty-font = 2
2564 bar-empty-foreground = ${colors.foreground-alt}
2565
2566 [module/backlight-acpi]
2567 inherit = module/xbacklight
2568 type = internal/backlight
2569 ;card = intel_backlight
2570 card = mba6x_backlight
2571
2572 [module/cpu]
2573 type = internal/cpu
2574 interval = 2
2575 format-prefix = " "
2576 format-prefix-foreground = ${colors.foreground-alt}
2577 format-underline = #f90000
2578 label = %percentage%%
2579
2580 [module/memory]
2581 type = internal/memory
2582 interval = 2
2583 format-prefix = " "
2584 format-prefix-foreground = ${colors.foreground-alt}
2585 format-underline = #4bffdc
2586 label = %percentage_used%%
2587
2588 [module/wlan]
2589 type = internal/network
2590 interface =
2591 interval = 3.0
2592
2593 format-connected = <ramp-signal> <label-connected>
2594 format-connected-underline = #9f78e1
2595 label-connected = %essid%
2596
2597 format-disconnected =
2598 ;format-disconnected = <label-disconnected>
2599 ;format-disconnected-underline = ${self.format-connected-underline}
2600 ;label-disconnected = %ifname% disconnected
2601 ;label-disconnected-foreground = ${colors.foreground-alt}
2602
2603 ramp-signal-0 = 
2604 ramp-signal-1 = 
2605 ramp-signal-2 = 
2606 ramp-signal-3 = 
2607 ramp-signal-4 = 
2608 ramp-signal-foreground = ${colors.foreground-alt}
2609
2610 [module/eth]
2611 type = internal/network
2612 interface =
2613 interval = 3.0
2614
2615 format-connected-underline = #55aa55
2616 format-connected-prefix = " "
2617 format-connected-prefix-foreground = ${colors.foreground-alt}
2618 label-connected = %local_ip%
2619
2620 format-disconnected =
2621 ;format-disconnected = <label-disconnected>
2622 ;format-disconnected-underline = ${self.format-connected-underline}
2623 ;label-disconnected = %ifname% disconnected
2624 ;label-disconnected-foreground = ${colors.foreground-alt}
2625
2626 [module/date]
2627 type = internal/date
2628 interval = 5
2629
2630 date =
2631 date-alt = " %Y-%m-%d"
2632
2633 time = %H:%M
2634 time-alt = %H:%M:%S
2635
2636 format-prefix = 
2637 format-prefix-foreground = ${colors.foreground-alt}
2638 format-underline = #0a6cf5
2639
2640 label = %date% %time%
2641
2642 [module/volume]
2643 type = internal/volume
2644
2645 format-volume = <label-volume> <bar-volume>
2646 label-volume = vol
2647 label-volume-foreground = ${root.foreground}
2648
2649 format-muted-prefix = " "
2650 format-muted-foreground = ${colors.foreground-alt}
2651 label-muted = mute
2652
2653 bar-volume-width = 10
2654 bar-volume-foreground-0 = #55aa55
2655 bar-volume-foreground-1 = #55aa55
2656 bar-volume-foreground-2 = #55aa55
2657 bar-volume-foreground-3 = #55aa55
2658 bar-volume-foreground-4 = #55aa55
2659 bar-volume-foreground-5 = #f5a70a
2660 bar-volume-foreground-6 = #ff5555
2661 bar-volume-gradient = false
2662 bar-volume-indicator = |
2663 bar-volume-indicator-font = 2
2664 bar-volume-fill = ─
2665 bar-volume-fill-font = 2
2666 bar-volume-empty = ─
2667 bar-volume-empty-font = 2
2668 bar-volume-empty-foreground = ${colors.foreground-alt}
2669
2670 [module/battery]
2671 type = internal/battery
2672 battery = BAT0
2673 adapter = ADP1
2674 full-at = 64
2675
2676 format-charging = <animation-charging> <label-charging>
2677 format-charging-underline = #ffb52a
2678
2679 format-discharging = <ramp-capacity> <label-discharging>
2680 format-discharging-underline = ${self.format-charging-underline}
2681
2682 format-full-prefix = " "
2683 format-full-prefix-foreground = ${colors.foreground-alt}
2684 format-full-underline = ${self.format-charging-underline}
2685
2686 ramp-capacity-0 = 
2687 ramp-capacity-1 = 
2688 ramp-capacity-2 = 
2689 ramp-capacity-foreground = ${colors.foreground-alt}
2690
2691 animation-charging-0 = 
2692 animation-charging-1 = 
2693 animation-charging-2 = 
2694 animation-charging-foreground = ${colors.foreground-alt}
2695 animation-charging-framerate = 750
2696
2697 [module/temperature]
2698 type = internal/temperature
2699 thermal-zone = 1
2700 warn-temperature = 66
2701
2702 format = <ramp> <label>
2703 format-underline = #f50a4d
2704 format-warn = <ramp> <label-warn>
2705 format-warn-underline = ${self.format-underline}
2706
2707 label = %temperature%
2708 label-warn = %temperature%
2709 label-warn-foreground = ${colors.secondary}
2710
2711 ramp-0 = 
2712 ramp-1 = 
2713 ramp-2 = 
2714 ramp-foreground = ${colors.foreground-alt}
2715
2716 [module/powermenu]
2717 type = custom/menu
2718
2719 format-spacing = 1
2720
2721 label-open = 
2722 label-open-foreground = ${colors.secondary}
2723 label-close =  cancel
2724 label-close-foreground = ${colors.secondary}
2725 label-separator = |
2726 label-separator-foreground = ${colors.foreground-alt}
2727
2728 menu-0-0 = reboot
2729 menu-0-0-exec = menu-open-1
2730 menu-0-1 = power off
2731 menu-0-1-exec = menu-open-2
2732
2733 menu-1-0 = cancel
2734 menu-1-0-exec = menu-open-0
2735 menu-1-1 = reboot
2736 menu-1-1-exec = sudo reboot
2737
2738 menu-2-0 = power off
2739 menu-2-0-exec = sudo poweroff
2740 menu-2-1 = cancel
2741 menu-2-1-exec = menu-open-0
2742
2743 [module/mail]
2744 type = custom/script
2745 interval = 60
2746 format = <label>
2747 format-prefix = " "
2748 format-prefix-foreground = ${colors.foreground-alt}
2749 format-underline = #0a6cf5
2750 exec = notmuch count tag:unread
2751
2752 [settings]
2753 screenchange-reload = true
2754 ;compositing-background = xor
2755 ;compositing-background = screen
2756 ;compositing-foreground = source
2757 ;compositing-border = over
2758
2759 [global/wm]
2760 margin-top = 0
2761 margin-bottom = 0
2762
2763 ; vim:ft=dosini
2764 #+end_src
2765
2766 *** polybar-launch
2767 :PROPERTIES:
2768 :header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
2769 :END:
2770
2771 #+begin_src sh :tangle no
2772 # Terminate already running bar instances
2773 killall -q polybar
2774
2775 # Wait until the processes have been shut down
2776 while pgrep -x polybar >/dev/null; do sleep 1; done
2777
2778 # Launch main bar
2779 polybar main &
2780
2781 echo "Bars launched..."
2782 #+end_src
2783
2784 ** PowerTOP
2785 :PROPERTIES:
2786 :header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
2787 :END:
2788
2789 #+begin_src conf
2790 [Unit]
2791 Description=Powertop tunings
2792
2793 [Service]
2794 ExecStart=/usr/bin/powertop --auto-tune
2795 RemainAfterExit=true
2796
2797 [Install]
2798 WantedBy=multi-user.target
2799 #+end_src
2800
2801 ** ranger
2802
2803 *** rc.conf
2804 :PROPERTIES:
2805 :header-args+: :tangle ~/.config/ranger/rc.conf
2806 :END:
2807
2808 #+begin_src conf :tangle no
2809 # ===================================================================
2810 # This file contains the default startup commands for ranger.
2811 # To change them, it is recommended to create the file
2812 # ~/.config/ranger/rc.conf and add your custom commands there.
2813 #
2814 # If you copy this whole file there, you may want to set the environment
2815 # variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
2816 #
2817 # The purpose of this file is mainly to define keybindings and settings.
2818 # For running more complex python code, please create a plugin in "plugins/" or
2819 # a command in "commands.py".
2820 #
2821 # Each line is a command that will be run before the user interface
2822 # is initialized.  As a result, you can not use commands which rely
2823 # on the UI such as :delete or :mark.
2824 # ===================================================================
2825
2826 # ===================================================================
2827 # == Options
2828 # ===================================================================
2829
2830 # How many columns are there, and what are their relative widths?
2831 set column_ratios 1,3,4
2832
2833 # Which files should be hidden? (regular expression)
2834 set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
2835
2836 # Show hidden files? You can toggle this by typing 'zh'
2837 set show_hidden false
2838
2839 # Ask for a confirmation when running the "delete" command?
2840 # Valid values are "always" (default), "never", "multiple"
2841 # With "multiple", ranger will ask only if you delete multiple files at once.
2842 set confirm_on_delete multiple
2843
2844 # Which script is used to generate file previews?
2845 # ranger ships with scope.sh, a script that calls external programs (see
2846 # README for dependencies) to preview images, archives, etc.
2847 set preview_script ~/.config/ranger/scope.sh
2848
2849 # Use the external preview script or display simple plain text previews?
2850 set use_preview_script true
2851
2852 # Open all images in this directory when running certain image viewers
2853 # like feh or sxiv?  You can still open selected files by marking them.
2854 set open_all_images true
2855
2856 # Be aware of version control systems and display information.
2857 set vcs_aware false
2858
2859 # State of the three backends git, hg, bzr. The possible states are
2860 # disabled, local (only show local info), enabled (show local and remote
2861 # information).
2862 set vcs_backend_git enabled
2863 set vcs_backend_hg disabled
2864 set vcs_backend_bzr disabled
2865
2866 # Preview images in full color with the external command "w3mimgpreview"?
2867 # This requires the console web browser "w3m" and a supported terminal.
2868 # It has been successfully tested with "xterm" and "urxvt" without tmux.
2869 set preview_images true
2870
2871 # Use a unicode "..." character to mark cut-off filenames?
2872 set unicode_ellipsis false
2873
2874 # Show dotfiles in the bookmark preview box?
2875 set show_hidden_bookmarks true
2876
2877 # Which colorscheme to use?  These colorschemes are available by default:
2878 # default, jungle, snow
2879 set colorscheme default
2880
2881 # Preview files on the rightmost column?
2882 # And collapse (shrink) the last column if there is nothing to preview?
2883 set preview_files true
2884 set preview_directories true
2885 set collapse_preview true
2886
2887 # Save the console history on exit?
2888 set save_console_history true
2889
2890 # Draw the status bar on top of the browser window (default: bottom)
2891 set status_bar_on_top false
2892
2893 # Draw a progress bar in the status bar which displays the average state of all
2894 # currently running tasks which support progress bars?
2895 set draw_progress_bar_in_status_bar true
2896
2897 # Draw borders around columns?
2898 set draw_borders true
2899
2900 # Display the directory name in tabs?
2901 set dirname_in_tabs false
2902
2903 # Enable the mouse support?
2904 set mouse_enabled true
2905
2906 # Display the file size in the main column or status bar?
2907 set display_size_in_main_column true
2908 set display_size_in_status_bar true
2909
2910 # Display files tags in all columns or only in main column?
2911 set display_tags_in_all_columns true
2912
2913 # Set a title for the window?
2914 set update_title false
2915
2916 # Set the title to "ranger" in the tmux program?
2917 set update_tmux_title false
2918
2919 # Shorten the title if it gets long?  The number defines how many
2920 # directories are displayed at once, 0 turns off this feature.
2921 set shorten_title 3
2922
2923 # Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
2924 set tilde_in_titlebar false
2925
2926 # How many directory-changes or console-commands should be kept in history?
2927 set max_history_size 20
2928 set max_console_history_size 50
2929
2930 # Try to keep so much space between the top/bottom border when scrolling:
2931 set scroll_offset 8
2932
2933 # Flush the input after each key hit?  (Noticable when ranger lags)
2934 set flushinput true
2935
2936 # Padding on the right when there's no preview?
2937 # This allows you to click into the space to run the file.
2938 set padding_right true
2939
2940 # Save bookmarks (used with mX and `X) instantly?
2941 # This helps to synchronize bookmarks between multiple ranger
2942 # instances but leads to *slight* performance loss.
2943 # When false, bookmarks are saved when ranger is exited.
2944 set autosave_bookmarks true
2945
2946 # You can display the "real" cumulative size of directories by using the
2947 # command :get_cumulative_size or typing "dc".  The size is expensive to
2948 # calculate and will not be updated automatically.  You can choose
2949 # to update it automatically though by turning on this option:
2950 set autoupdate_cumulative_size false
2951
2952 # Turning this on makes sense for screen readers:
2953 set show_cursor false
2954
2955 # One of: size, basename, mtime, type
2956 set sort natural
2957
2958 # Additional sorting options
2959 set sort_reverse false
2960 set sort_case_insensitive true
2961 set sort_directories_first true
2962
2963 # Enable this if key combinations with the Alt Key don't work for you.
2964 # (Especially on xterm)
2965 set xterm_alt_key false
2966
2967 # ===================================================================
2968 # == Local Options
2969 # ===================================================================
2970 # You can set local options that only affect a single directory.
2971
2972 # Examples:
2973 # setlocal path=~/downloads sort mtime
2974
2975 # ===================================================================
2976 # == Command Aliases in the Console
2977 # ===================================================================
2978
2979 alias e    edit
2980 alias q    quit
2981 alias q!   quitall
2982 alias qall quitall
2983 alias setl setlocal
2984
2985 alias filter     scout -prt
2986 alias find       scout -aet
2987 alias mark       scout -mr
2988 alias unmark     scout -Mr
2989 alias search     scout -rs
2990 alias search_inc scout -rts
2991 alias travel     scout -aefiklst
2992
2993 # ===================================================================
2994 # == Define keys for the browser
2995 # ===================================================================
2996
2997 # Basic
2998 map     Q quit!
2999 map     q quit
3000 copymap q ZZ ZQ
3001
3002 map R     reload_cwd
3003 map <C-r> reset
3004 map <C-l> redraw_window
3005 map <C-c> abort
3006 map <esc> change_mode normal
3007
3008 map i display_file
3009 map ? help
3010 map W display_log
3011 map w taskview_open
3012 map S shell $SHELL
3013
3014 map :  console
3015 map ;  console
3016 map !  console shell
3017 map @  console -p6 shell  %%s
3018 map #  console shell -p
3019 map s  console shell
3020 map r  chain draw_possible_programs; console open_with
3021 map f  console find
3022 map cd console cd
3023
3024 # Tagging / Marking
3025 map t       tag_toggle
3026 map ut      tag_remove
3027 map "<any>  tag_toggle tag=%any
3028 map <Space> mark_files toggle=True
3029 map v       mark_files all=True toggle=True
3030 map uv      mark_files all=True val=False
3031 map V       toggle_visual_mode
3032 map uV      toggle_visual_mode reverse=True
3033
3034 # For the nostalgics: Midnight Commander bindings
3035 map <F1> help
3036 map <F3> display_file
3037 map <F4> edit
3038 map <F5> copy
3039 map <F6> cut
3040 map <F7> console mkdir
3041 map <F8> console delete
3042 map <F10> exit
3043
3044 # In case you work on a keyboard with dvorak layout
3045 map <UP>       move up=1
3046 map <DOWN>     move down=1
3047 map <LEFT>     move left=1
3048 map <RIGHT>    move right=1
3049 map <HOME>     move to=0
3050 map <END>      move to=-1
3051 map <PAGEDOWN> move down=1   pages=True
3052 map <PAGEUP>   move up=1     pages=True
3053 map <CR>       move right=1
3054 map <DELETE>   console delete
3055 map <INSERT>   console touch
3056
3057 # VIM-like
3058 copymap <UP>       k
3059 copymap <DOWN>     j
3060 copymap <LEFT>     h
3061 copymap <RIGHT>    l
3062 copymap <HOME>     gg
3063 copymap <END>      G
3064 copymap <PAGEDOWN> <C-F>
3065 copymap <PAGEUP>   <C-B>
3066
3067 map J  move down=0.5  pages=True
3068 map K  move up=0.5    pages=True
3069 copymap J <C-D>
3070 copymap K <C-U>
3071
3072 # Jumping around
3073 map H     history_go -1
3074 map L     history_go 1
3075 map ]     move_parent 1
3076 map [     move_parent -1
3077 map }     traverse
3078
3079 map gh cd ~
3080 map ge cd /etc
3081 map gu cd /usr
3082 map gd cd /dev
3083 map gl cd -r .
3084 map gL cd -r %f
3085 map go cd /opt
3086 map gv cd /var
3087 map gm cd /media
3088 map gM cd /mnt
3089 map gs cd /srv
3090 map gr cd /
3091 map gR eval fm.cd(ranger.RANGERDIR)
3092 map g/ cd /
3093 map g? cd /usr/share/doc/ranger
3094
3095 # External Programs
3096 map E  edit
3097 map du shell -p du --max-depth=1 -h --apparent-size
3098 map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
3099 map yp shell -d echo -n %d/%f | xsel -i
3100 map yd shell -d echo -n %d    | xsel -i
3101 map yn shell -d echo -n %f    | xsel -i
3102
3103 # Filesystem Operations
3104 map =  chmod
3105
3106 map cw console rename
3107 map A  eval fm.open_console('rename ' + fm.thisfile.basename)
3108 map I  eval fm.open_console('rename ' + fm.thisfile.basename, position=7)
3109
3110 map pp paste
3111 map po paste overwrite=True
3112 map pl paste_symlink relative=False
3113 map pL paste_symlink relative=True
3114 map phl paste_hardlink
3115 map pht paste_hardlinked_subtree
3116
3117 map dd cut
3118 map ud uncut
3119 map da cut mode=add
3120 map dr cut mode=remove
3121
3122 map yy copy
3123 map uy uncut
3124 map ya copy mode=add
3125 map yr copy mode=remove
3126
3127 # Temporary workarounds
3128 map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
3129 map dG  eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
3130 map dj  eval fm.cut(dirarg=dict(down=1), narg=quantifier)
3131 map dk  eval fm.cut(dirarg=dict(up=1), narg=quantifier)
3132 map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
3133 map yG  eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
3134 map yj  eval fm.copy(dirarg=dict(down=1), narg=quantifier)
3135 map yk  eval fm.copy(dirarg=dict(up=1), narg=quantifier)
3136
3137 # Searching
3138 map /  console search
3139 map n  search_next
3140 map N  search_next forward=False
3141 map ct search_next order=tag
3142 map cs search_next order=size
3143 map ci search_next order=mimetype
3144 map cc search_next order=ctime
3145 map cm search_next order=mtime
3146 map ca search_next order=atime
3147
3148 # Tabs
3149 map <C-n>     tab_new ~
3150 map <C-w>     tab_close
3151 map <TAB>     tab_move 1
3152 map <S-TAB>   tab_move -1
3153 map <A-Right> tab_move 1
3154 map <A-Left>  tab_move -1
3155 map gt        tab_move 1
3156 map gT        tab_move -1
3157 map gn        tab_new ~
3158 map gc        tab_close
3159 map uq        tab_restore
3160 map <a-1>     tab_open 1
3161 map <a-2>     tab_open 2
3162 map <a-3>     tab_open 3
3163 map <a-4>     tab_open 4
3164 map <a-5>     tab_open 5
3165 map <a-6>     tab_open 6
3166 map <a-7>     tab_open 7
3167 map <a-8>     tab_open 8
3168 map <a-9>     tab_open 9
3169
3170 # Sorting
3171 map or toggle_option sort_reverse
3172 map os chain set sort=size;      set sort_reverse=False
3173 map ob chain set sort=basename;  set sort_reverse=False
3174 map on chain set sort=natural;   set sort_reverse=False
3175 map om chain set sort=mtime;     set sort_reverse=False
3176 map oc chain set sort=ctime;     set sort_reverse=False
3177 map oa chain set sort=atime;     set sort_reverse=False
3178 map ot chain set sort=type;      set sort_reverse=False
3179
3180 map oS chain set sort=size;      set sort_reverse=True
3181 map oB chain set sort=basename;  set sort_reverse=True
3182 map oN chain set sort=natural;   set sort_reverse=True
3183 map oM chain set sort=mtime;     set sort_reverse=True
3184 map oC chain set sort=ctime;     set sort_reverse=True
3185 map oA chain set sort=atime;     set sort_reverse=True
3186 map oT chain set sort=type;      set sort_reverse=True
3187
3188 map dc get_cumulative_size
3189
3190 # Settings
3191 map zc    toggle_option collapse_preview
3192 map zd    toggle_option sort_directories_first
3193 map zh    toggle_option show_hidden
3194 map <C-h> toggle_option show_hidden
3195 map zi    toggle_option flushinput
3196 map zm    toggle_option mouse_enabled
3197 map zp    toggle_option preview_files
3198 map zP    toggle_option preview_directories
3199 map zs    toggle_option sort_case_insensitive
3200 map zu    toggle_option autoupdate_cumulative_size
3201 map zv    toggle_option use_preview_script
3202 map zf    console filter
3203
3204 # Bookmarks
3205 map `<any>  enter_bookmark %any
3206 map '<any>  enter_bookmark %any
3207 map m<any>  set_bookmark %any
3208 map um<any> unset_bookmark %any
3209
3210 map m<bg>   draw_bookmarks
3211 copymap m<bg>  um<bg> `<bg> '<bg>
3212
3213 # Generate all the chmod bindings with some python help:
3214 eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
3215 eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
3216 eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
3217 eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
3218 eval for arg in "rwxXst": cmd("map +{0}  shell -d chmod u+{0} %s".format(arg))
3219
3220 eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
3221 eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
3222 eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
3223 eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
3224 eval for arg in "rwxXst": cmd("map -{0}  shell -d chmod u-{0} %s".format(arg))
3225
3226 # ===================================================================
3227 # == Define keys for the console
3228 # ===================================================================
3229 # Note: Unmapped keys are passed directly to the console.
3230
3231 # Basic
3232 cmap <tab>   eval fm.ui.console.tab()
3233 cmap <s-tab> eval fm.ui.console.tab(-1)
3234 cmap <ESC>   eval fm.ui.console.close()
3235 cmap <CR>    eval fm.ui.console.execute()
3236 cmap <C-l>   redraw_window
3237
3238 copycmap <ESC> <C-c>
3239 copycmap <CR>  <C-j>
3240
3241 # Move around
3242 cmap <up>    eval fm.ui.console.history_move(-1)
3243 cmap <down>  eval fm.ui.console.history_move(1)
3244 cmap <left>  eval fm.ui.console.move(left=1)
3245 cmap <right> eval fm.ui.console.move(right=1)
3246 cmap <home>  eval fm.ui.console.move(right=0, absolute=True)
3247 cmap <end>   eval fm.ui.console.move(right=-1, absolute=True)
3248
3249 # Line Editing
3250 cmap <backspace>  eval fm.ui.console.delete(-1)
3251 cmap <delete>     eval fm.ui.console.delete(0)
3252 cmap <C-w>        eval fm.ui.console.delete_word()
3253 cmap <C-k>        eval fm.ui.console.delete_rest(1)
3254 cmap <C-u>        eval fm.ui.console.delete_rest(-1)
3255 cmap <C-y>        eval fm.ui.console.paste()
3256
3257 # And of course the emacs way
3258 copycmap <up>        <C-p>
3259 copycmap <down>      <C-n>
3260 copycmap <left>      <C-b>
3261 copycmap <right>     <C-f>
3262 copycmap <home>      <C-a>
3263 copycmap <end>       <C-e>
3264 copycmap <delete>    <C-d>
3265 copycmap <backspace> <C-h>
3266
3267 # Note: There are multiple ways to express backspaces.  <backspace> (code 263)
3268 # and <backspace2> (code 127).  To be sure, use both.
3269 copycmap <backspace> <backspace2>
3270
3271 # This special expression allows typing in numerals:
3272 cmap <allow_quantifiers> false
3273
3274 # ===================================================================
3275 # == Pager Keybindings
3276 # ===================================================================
3277
3278 # Movement
3279 pmap  <down>      pager_move  down=1
3280 pmap  <up>        pager_move  up=1
3281 pmap  <left>      pager_move  left=4
3282 pmap  <right>     pager_move  right=4
3283 pmap  <home>      pager_move  to=0
3284 pmap  <end>       pager_move  to=-1
3285 pmap  <pagedown>  pager_move  down=1.0  pages=True
3286 pmap  <pageup>    pager_move  up=1.0    pages=True
3287 pmap  <C-d>       pager_move  down=0.5  pages=True
3288 pmap  <C-u>       pager_move  up=0.5    pages=True
3289
3290 copypmap <UP>       k  <C-p>
3291 copypmap <DOWN>     j  <C-n> <CR>
3292 copypmap <LEFT>     h
3293 copypmap <RIGHT>    l
3294 copypmap <HOME>     g
3295 copypmap <END>      G
3296 copypmap <C-d>      d
3297 copypmap <C-u>      u
3298 copypmap <PAGEDOWN> n  f  <C-F>  <Space>
3299 copypmap <PAGEUP>   p  b  <C-B>
3300
3301 # Basic
3302 pmap     <ESC> pager_close
3303 copypmap <ESC> q Q i <F3>
3304 pmap E      edit_file
3305
3306 # ===================================================================
3307 # == Taskview Keybindings
3308 # ===================================================================
3309
3310 # Movement
3311 tmap <up>        taskview_move up=1
3312 tmap <down>      taskview_move down=1
3313 tmap <home>      taskview_move to=0
3314 tmap <end>       taskview_move to=-1
3315 tmap <pagedown>  taskview_move down=1.0  pages=True
3316 tmap <pageup>    taskview_move up=1.0    pages=True
3317 tmap <C-d>       taskview_move down=0.5  pages=True
3318 tmap <C-u>       taskview_move up=0.5    pages=True
3319
3320 copytmap <UP>       k  <C-p>
3321 copytmap <DOWN>     j  <C-n> <CR>
3322 copytmap <HOME>     g
3323 copytmap <END>      G
3324 copytmap <C-u>      u
3325 copytmap <PAGEDOWN> n  f  <C-F>  <Space>
3326 copytmap <PAGEUP>   p  b  <C-B>
3327
3328 # Changing priority and deleting tasks
3329 tmap J          eval -q fm.ui.taskview.task_move(-1)
3330 tmap K          eval -q fm.ui.taskview.task_move(0)
3331 tmap dd         eval -q fm.ui.taskview.task_remove()
3332 tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
3333 tmap <pageup>   eval -q fm.ui.taskview.task_move(0)
3334 tmap <delete>   eval -q fm.ui.taskview.task_remove()
3335
3336 # Basic
3337 tmap <ESC> taskview_close
3338 copytmap <ESC> q Q w <C-c>
3339 #+end_src
3340
3341 *** scope.sh
3342 :PROPERTIES:
3343 :header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
3344 :END:
3345
3346 #+begin_src sh :tangle no
3347 # ranger supports enhanced previews.  If the option "use_preview_script"
3348 # is set to True and this file exists, this script will be called and its
3349 # output is displayed in ranger.  ANSI color codes are supported.
3350
3351 # NOTES: This script is considered a configuration file.  If you upgrade
3352 # ranger, it will be left untouched. (You must update it yourself.)
3353 # Also, ranger disables STDIN here, so interactive scripts won't work properly
3354
3355 # Meanings of exit codes:
3356 # code | meaning    | action of ranger
3357 # -----+------------+-------------------------------------------
3358 # 0    | success    | success. display stdout as preview
3359 # 1    | no preview | failure. display no preview at all
3360 # 2    | plain text | display the plain content of the file
3361 # 3    | fix width  | success. Don't reload when width changes
3362 # 4    | fix height | success. Don't reload when height changes
3363 # 5    | fix both   | success. Don't ever reload
3364
3365 # Meaningful aliases for arguments:
3366 path="$1"    # Full path of the selected file
3367 width="$2"   # Width of the preview pane (number of fitting characters)
3368 height="$3"  # Height of the preview pane (number of fitting characters)
3369
3370 maxln=200    # Stop after $maxln lines.  Can be used like ls | head -n $maxln
3371
3372 # Find out something about the file:
3373 mimetype=$(file --mime-type -Lb "$path")
3374 extension=${path##*.}
3375
3376 # Functions:
3377 # runs a command and saves its output into $output.  Useful if you need
3378 # the return value AND want to use the output in a pipe
3379 try() { output=$(eval '"$@"'); }
3380
3381 # writes the output of the previouosly used "try" command
3382 dump() { echo "$output"; }
3383
3384 # a common post-processing function used after most commands
3385 trim() { head -n "$maxln"; }
3386
3387 # wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
3388 highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }
3389
3390 case "$extension" in
3391     # Archive extensions:
3392     7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
3393     rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
3394         try als "$path" && { dump | trim; exit 0; }
3395         try acat "$path" && { dump | trim; exit 3; }
3396         try bsdtar -lf "$path" && { dump | trim; exit 0; }
3397         exit 1;;
3398     rar)
3399         try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
3400     # PDF documents:
3401     pdf)
3402         try pdftotext -l 10 -nopgbrk -q "$path" - && \
3403             { dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
3404     # BitTorrent Files
3405     torrent)
3406         try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
3407     # HTML Pages:
3408     htm|html|xhtml)
3409         try w3m    -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3410         try lynx   -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3411         try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3412         ;; # fall back to highlight/cat if the text browsers fail
3413 esac
3414
3415 case "$mimetype" in
3416     # Syntax highlight for text files:
3417     text/* | */xml)
3418         try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
3419     # Ascii-previews of images:
3420     image/*)
3421         img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
3422     # Display information about media files:
3423     video/* | audio/*)
3424         exiftool "$path" && exit 5
3425         # Use sed to remove spaces so the output fits into the narrow window
3426         try mediainfo "$path" && { dump | trim | sed 's/  \+:/: /;';  exit 5; } || exit 1;;
3427 esac
3428
3429 exit 1
3430 #+end_src
3431
3432 ** redshift
3433 :PROPERTIES:
3434 :header-args+: :tangle ~/.config/redshift.conf :comments none
3435 :END:
3436
3437 #+begin_src conf
3438 ; Global settings for redshift
3439 [redshift]
3440 ; Set the day and night screen temperatures (Neutral is 6500K)
3441 ;temp-day=5700
3442 ;temp-night=3500
3443
3444 ;temp-day=6500
3445 temp-day=6200
3446 ;temp-night=4800
3447 ;temp-night=5000
3448 ;temp-night=4500
3449 temp-night=4000
3450
3451 ; Enable/Disable a smooth transition between day and night
3452 ; 0 will cause a direct change from day to night screen temperature.
3453 ; 1 will gradually increase or decrease the screen temperature.
3454 transition=1
3455
3456 ; Set the screen brightness. Default is 1.0.
3457 ;brightness=0.9
3458 ; It is also possible to use different settings for day and night
3459 ; since version 1.8.
3460 ;brightness-day=0.7
3461 ;brightness-night=0.4
3462 ; Set the screen gamma (for all colors, or each color channel
3463 ; individually)
3464 ;gamma=0.8
3465 ;gamma=1.0
3466 ;gamma=0.8:0.7:0.8
3467 ; This can also be set individually for day and night since
3468 ; version 1.10.
3469 ;gamma-day=0.8:0.7:0.8
3470 ;gamma-night=0.6
3471
3472 ; Set the location-provider: 'geoclue2' or 'manual'
3473 ; type 'redshift -l list' to see possible values.
3474 ; The location provider settings are in a different section.
3475 ;location-provider=manual
3476 location-provider=geoclue2
3477
3478 ; Set the adjustment-method: 'randr', 'vidmode'
3479 ; type 'redshift -m list' to see all possible values.
3480 ; 'randr' is the preferred method, 'vidmode' is an older API.
3481 ; but works in some cases when 'randr' does not.
3482 ; The adjustment method settings are in a different section.
3483 adjustment-method=randr
3484
3485 ; Configuration of the location-provider:
3486 ; type 'redshift -l PROVIDER:help' to see the settings.
3487 ; ex: 'redshift -l manual:help'
3488 ; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
3489 ; are negative numbers.
3490 ;[manual]
3491 ;lat=48.1
3492 ;lon=11.6
3493
3494 ; Configuration of the adjustment-method
3495 ; type 'redshift -m METHOD:help' to see the settings.
3496 ; ex: 'redshift -m randr:help'
3497 ; In this example, randr is configured to adjust screen 1.
3498 ; Note that the numbering starts from 0, so this is actually the
3499 ; second screen. If this option is not specified, Redshift will try
3500 ; to adjust _all_ screens.
3501 ;[randr]
3502 ;screen=1
3503 #+end_src
3504
3505 ** rofi
3506 :PROPERTIES:
3507 :header-args+: :tangle ~/.config/rofi/config
3508 :END:
3509
3510 #+begin_src conf
3511 rofi.font: Ubuntu Mono 13
3512 ! rofi.font: Inconsolata 16
3513 ! rofi.font: Iosevka 13
3514 ! rofi.font: Source Code Pro 11
3515 rofi.modi: run,window
3516 ! rofi.width: 640
3517 rofi.width: 600
3518 !rofi.location: 2
3519 !rofi.yoffset: 200
3520 rofi.monitor: -1
3521 !rofi.lines: 10
3522
3523 !rofi.theme: /usr/share/rofi/themes//Arc.rasi
3524 !rofi.theme: /usr/share/rofi/themes//Paper.rasi
3525 !rofi.theme: /usr/share/rofi/themes//sidebar.rasi
3526
3527 rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
3528 #+end_src
3529
3530 ** rofi-pass
3531 :PROPERTIES:
3532 :header-args+: :tangle ~/.config/rofi-pass/config
3533 :END:
3534
3535 #+begin_src conf
3536 # permanently set alternative root dir
3537 # root=/path/to/root
3538
3539 # rofi command. Make sure to have "$@" as last argument
3540 _rofi () {
3541     #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
3542     rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
3543 }
3544
3545 # xdotool needs the keyboard layout to be set using setxkbmap
3546 # You can do this in your autostart scripts (e.g. xinitrc)
3547
3548 # If for some reason, you cannot do this, you can set the command here.
3549 # and set fix_layout to true
3550 fix_layout=false
3551
3552 layout_cmd () {
3553   setxkbmap us
3554 }
3555
3556 # fields to be used
3557 URL_field='url'
3558 USERNAME_field='user'
3559 AUTOTYPE_field='autotype'
3560
3561 # delay to be used for :delay keyword
3562 delay=2
3563
3564 ## Programs to be used
3565 # Editor
3566 EDITOR='gvim -f'
3567
3568 # Browser
3569 BROWSER='chromium'
3570
3571 ## Misc settings
3572
3573 default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
3574 auto_enter='false'
3575 notify='false'
3576 default_autotype='user :tab pass'
3577
3578 # color of the help messages
3579 # leave empty for autodetection
3580 help_color="#4872FF"
3581
3582 # Clipboard settings
3583 # Possible options: primary, clipboard, both
3584 clip=primary
3585
3586 # Options for generating new password entries
3587 # default_user is also used for password files that have no user field.
3588 default_user=aminb
3589 default_user2=aminban
3590 password_length=30
3591
3592 # Custom Keybindings
3593 #autotype="Alt+1"
3594 autotype="Alt+m"
3595 type_user="Alt+2"
3596 type_pass="Alt+3"
3597 open_url="Alt+4"
3598 copy_name="Alt+u"
3599 copy_url="Alt+l"
3600 copy_pass="Alt+p"
3601 show="Alt+o"
3602 copy_entry="Alt+2"
3603 type_entry="Alt+1"
3604 copy_menu="Alt+c"
3605 action_menu="Alt+a"
3606 type_menu="Alt+t"
3607 help="Alt+h"
3608 switch="Alt+x"
3609 insert_pass="Alt+n"
3610 #+end_src
3611
3612 ** TLP
3613
3614 *** TODO enigma
3615 *** plasma
3616
3617 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/default/tlp")
3618 # ------------------------------------------------------------------------------
3619 # tlp - Parameters for power saving
3620 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
3621
3622 # Hint: some features are disabled by default, remove the leading # to enable
3623 # them.
3624
3625 # Set to 0 to disable, 1 to enable TLP.
3626 TLP_ENABLE=1
3627
3628 # Operation mode when no power supply can be detected: AC, BAT.
3629 # Concerns some desktop and embedded hardware only.
3630 TLP_DEFAULT_MODE=AC
3631
3632 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
3633 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
3634 TLP_PERSISTENT_DEFAULT=0
3635
3636 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
3637 # Non-zero value enables, zero disables laptop mode.
3638 DISK_IDLE_SECS_ON_AC=0
3639 DISK_IDLE_SECS_ON_BAT=2
3640
3641 # Dirty page values (timeouts in secs).
3642 MAX_LOST_WORK_SECS_ON_AC=15
3643 MAX_LOST_WORK_SECS_ON_BAT=60
3644
3645 # Hint: CPU parameters below are disabled by default, remove the leading #
3646 # to enable them, otherwise kernel default values are used.
3647
3648 # Select a CPU frequency scaling governor.
3649 # Intel Core i processor with intel_pstate driver:
3650 #   powersave(*), performance.
3651 # Older hardware with acpi-cpufreq driver:
3652 #   ondemand(*), powersave, performance, conservative, schedutil.
3653 # (*) is recommended.
3654 # Hint: use tlp-stat -p to show the active driver and available governors.
3655 # Important:
3656 #   powersave for intel_pstate and ondemand for acpi-cpufreq are power
3657 #   efficient for *almost all* workloads and therefore kernel and most
3658 #   distributions have chosen them as defaults. If you still want to change,
3659 #   you should know what you're doing! You *must* disable your distribution's
3660 #   governor settings or conflicts will occur.
3661 #CPU_SCALING_GOVERNOR_ON_AC=powersave
3662 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
3663
3664 # Set the min/max frequency available for the scaling governor.
3665 # Possible values strongly depend on your CPU. For available frequencies see
3666 # the output of tlp-stat -p.
3667 #CPU_SCALING_MIN_FREQ_ON_AC=0
3668 #CPU_SCALING_MAX_FREQ_ON_AC=0
3669 #CPU_SCALING_MIN_FREQ_ON_BAT=0
3670 #CPU_SCALING_MAX_FREQ_ON_BAT=0
3671
3672 # Set energy performance hints (HWP) for Intel P-state governor:
3673 #   performance, balance_performance, default, balance_power, power
3674 # Values are given in order of increasing power saving.
3675 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
3676 CPU_HWP_ON_AC=balance_performance
3677 CPU_HWP_ON_BAT=balance_power
3678
3679 # Set Intel P-state performance: 0..100 (%).
3680 # Limit the max/min P-state to control the power dissipation of the CPU.
3681 # Values are stated as a percentage of the available performance.
3682 # Requires an Intel Core i processor with intel_pstate driver.
3683 #CPU_MIN_PERF_ON_AC=0
3684 #CPU_MAX_PERF_ON_AC=100
3685 #CPU_MIN_PERF_ON_BAT=0
3686 #CPU_MAX_PERF_ON_BAT=30
3687
3688 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
3689 # Requires an Intel Core i processor.
3690 # Important:
3691 # - This may conflict with your distribution's governor settings
3692 # - A value of 1 does *not* activate boosting, it just allows it
3693 #CPU_BOOST_ON_AC=1
3694 #CPU_BOOST_ON_BAT=0
3695
3696 # Minimize number of used CPU cores/hyper-threads under light load conditions:
3697 #   0=disable, 1=enable.
3698 SCHED_POWERSAVE_ON_AC=0
3699 SCHED_POWERSAVE_ON_BAT=1
3700
3701 # Kernel NMI Watchdog:
3702 #   0=disable (default, saves power), 1=enable (for kernel debugging only).
3703 NMI_WATCHDOG=0
3704
3705 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
3706 # Frequency voltage pairs are written to:
3707 #   /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
3708 # CAUTION: only use this, if you thoroughly understand what you are doing!
3709 #PHC_CONTROLS="F:V F:V F:V F:V"
3710
3711 # Set CPU performance versus energy savings policy:
3712 #   performance, balance-performance, default, balance-power, power.
3713 # Values are given in order of increasing power saving.
3714 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
3715 ENERGY_PERF_POLICY_ON_AC=performance
3716 ENERGY_PERF_POLICY_ON_BAT=balance-power
3717
3718 # Disk devices; separate multiple devices with spaces (default: sda).
3719 # Devices can be specified by disk ID also (lookup with: tlp diskid).
3720 DISK_DEVICES="sda sdb"
3721
3722 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
3723 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
3724 # Separate values for multiple disks with spaces. Use the special value 'keep'
3725 # to keep the hardware default for the particular disk.
3726 DISK_APM_LEVEL_ON_AC="254 254"
3727 DISK_APM_LEVEL_ON_BAT="128 128"
3728
3729 # Hard disk spin down timeout:
3730 #   0:        spin down disabled
3731 #   1..240:   timeouts from 5s to 20min (in units of 5s)
3732 #   241..251: timeouts from 30min to 5.5 hours (in units of 30min)
3733 # See 'man hdparm' for details.
3734 # Separate values for multiple disks with spaces. Use the special value 'keep'
3735 # to keep the hardware default for the particular disk.
3736 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
3737 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
3738
3739 # Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
3740 # Separate values for multiple disks with spaces. Use the special value 'keep'
3741 # to keep the kernel default scheduler for the particular disk.
3742 #DISK_IOSCHED="cfq cfq"
3743
3744 # AHCI link power management (ALPM) for disk devices:
3745 #   min_power, med_power_with_dipm(*), medium_power, max_performance.
3746 # (*) Kernel >= 4.15 required, then recommended.
3747 # Multiple values separated with spaces are tried sequentially until success.
3748 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
3749 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
3750
3751 # Exclude host devices from AHCI link power management.
3752 # Separate multiple hosts with spaces.
3753 #SATA_LINKPWR_BLACKLIST="host1"
3754
3755 # Runtime Power Management for AHCI host and disks devices:
3756 #   on=disable, auto=enable.
3757 # EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
3758 #AHCI_RUNTIME_PM_ON_AC=on
3759 #AHCI_RUNTIME_PM_ON_BAT=on
3760
3761 # Seconds of inactivity before disk is suspended.
3762 AHCI_RUNTIME_PM_TIMEOUT=15
3763
3764 # PCI Express Active State Power Management (PCIe ASPM):
3765 #   default, performance, powersave.
3766 PCIE_ASPM_ON_AC=performance
3767 PCIE_ASPM_ON_BAT=powersave
3768
3769 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
3770 # auto = mid on BAT, high on AC; default = use hardware defaults.
3771 RADEON_POWER_PROFILE_ON_AC=high
3772 RADEON_POWER_PROFILE_ON_BAT=low
3773
3774 # Radeon dynamic power management method (DPM): battery, performance.
3775 RADEON_DPM_STATE_ON_AC=performance
3776 RADEON_DPM_STATE_ON_BAT=battery
3777
3778 # Radeon DPM performance level: auto, low, high; auto is recommended.
3779 RADEON_DPM_PERF_LEVEL_ON_AC=auto
3780 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
3781
3782 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
3783 WIFI_PWR_ON_AC=off
3784 WIFI_PWR_ON_BAT=on
3785
3786 # Disable wake on LAN: Y/N.
3787 WOL_DISABLE=Y
3788
3789 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
3790 # A value of 0 disables, >=1 enables power saving (recommended: 1).
3791 SOUND_POWER_SAVE_ON_AC=0
3792 SOUND_POWER_SAVE_ON_BAT=0
3793
3794 # Disable controller too (HDA only): Y/N.
3795 SOUND_POWER_SAVE_CONTROLLER=N
3796
3797 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
3798 # Drive can be powered on again by releasing (and reinserting) the eject lever
3799 # or by pressing the disc eject button on newer models.
3800 # Note: an UltraBay/MediaBay hard disk is never powered off.
3801 BAY_POWEROFF_ON_AC=0
3802 BAY_POWEROFF_ON_BAT=0
3803 # Optical drive device to power off (default sr0).
3804 BAY_DEVICE="sr0"
3805
3806 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
3807 RUNTIME_PM_ON_AC=on
3808 RUNTIME_PM_ON_BAT=auto
3809
3810 # Exclude PCI(e) device adresses the following list from Runtime PM
3811 # (separate with spaces). Use lspci to get the adresses (1st column).
3812 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
3813 RUNTIME_PM_BLACKLIST="01:00.0"
3814
3815 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
3816 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
3817 # prevents accidential power-on of dGPU in hybrid graphics setups.
3818 # Use "" to disable the feature completely.
3819 # Separate multiple drivers with spaces.
3820 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
3821
3822 # Set to 0 to disable, 1 to enable USB autosuspend feature.
3823 USB_AUTOSUSPEND=1
3824
3825 # Exclude listed devices from USB autosuspend (separate with spaces).
3826 # Use lsusb to get the ids.
3827 # Note: input devices (usbhid) are excluded automatically
3828 #USB_BLACKLIST="1111:2222 3333:4444"
3829
3830 # Bluetooth devices are excluded from USB autosuspend:
3831 #   0=do not exclude, 1=exclude.
3832 USB_BLACKLIST_BTUSB=0
3833
3834 # Phone devices are excluded from USB autosuspend:
3835 #   0=do not exclude, 1=exclude (enable charging).
3836 USB_BLACKLIST_PHONE=0
3837
3838 # Printers are excluded from USB autosuspend:
3839 #   0=do not exclude, 1=exclude.
3840 USB_BLACKLIST_PRINTER=1
3841
3842 # WWAN devices are excluded from USB autosuspend:
3843 #   0=do not exclude, 1=exclude.
3844 USB_BLACKLIST_WWAN=1
3845
3846 # Include listed devices into USB autosuspend even if already excluded
3847 # by the blacklists above (separate with spaces).
3848 # Use lsusb to get the ids.
3849 #USB_WHITELIST="1111:2222 3333:4444"
3850
3851 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
3852 # (workaround for USB devices that cause shutdown problems).
3853 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
3854
3855 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
3856 # on system startup: 0=disable, 1=enable.
3857 # Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
3858 #   are ignored when this is enabled!
3859 #RESTORE_DEVICE_STATE_ON_STARTUP=0
3860 RESTORE_DEVICE_STATE_ON_STARTUP=1
3861
3862 # Radio devices to disable on startup: bluetooth, wifi, wwan.
3863 # Separate multiple devices with spaces.
3864 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
3865
3866 # Radio devices to enable on startup: bluetooth, wifi, wwan.
3867 # Separate multiple devices with spaces.
3868 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
3869
3870 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
3871 # (workaround for devices that are blocking shutdown).
3872 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
3873
3874 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
3875 # (to prevent other operating systems from missing radios).
3876 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
3877
3878 # Radio devices to enable on AC: bluetooth, wifi, wwan.
3879 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
3880
3881 # Radio devices to disable on battery: bluetooth, wifi, wwan.
3882 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
3883
3884 # Radio devices to disable on battery when not in use (not connected):
3885 #   bluetooth, wifi, wwan.
3886 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
3887
3888 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
3889 # required). Charging starts when the remaining capacity falls below the
3890 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
3891 # Main / Internal battery (values in %)
3892 #START_CHARGE_THRESH_BAT0=75
3893 #STOP_CHARGE_THRESH_BAT0=80
3894 # Ultrabay / Slice / Replaceable battery (values in %)
3895 #START_CHARGE_THRESH_BAT1=75
3896 #STOP_CHARGE_THRESH_BAT1=80
3897
3898 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
3899 #RESTORE_THRESHOLDS_ON_BAT=1
3900
3901 # ------------------------------------------------------------------------------
3902 # tlp-rdw - Parameters for the radio device wizard
3903 # Possible devices: bluetooth, wifi, wwan.
3904
3905 # Hints:
3906 # - Parameters are disabled by default, remove the leading # to enable them
3907 # - Separate multiple radio devices with spaces
3908
3909 # Radio devices to disable on connect.
3910 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
3911 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
3912 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
3913
3914 # Radio devices to enable on disconnect.
3915 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
3916 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
3917 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
3918
3919 # Radio devices to enable/disable when docked.
3920 #DEVICES_TO_ENABLE_ON_DOCK=""
3921 #DEVICES_TO_DISABLE_ON_DOCK=""
3922
3923 # Radio devices to enable/disable when undocked.
3924 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
3925 #DEVICES_TO_DISABLE_ON_UNDOCK=""
3926 #+end_src
3927
3928 ** X
3929
3930 *** xprofile
3931 :PROPERTIES:
3932 :header-args+: :tangle ~/.xprofile
3933 :END:
3934
3935 =~/.xprofile= is similar in style to =~/.xinitrc=, but on the
3936 contrary, it's automatically sourced by LightDM, my display manager of
3937 choice.
3938
3939 #+begin_src sh
3940 xset -b  # disable bell
3941 xset r rate 200 45  # repeat delay (ms) and rate (repeats/sec)
3942
3943 # setxkbmap -option compose:ralt
3944
3945 setxkbmap -option ctrl:nocaps          # turn capslock into control
3946 setxkbmap -option altwin:swap_alt_win  # swap alt and super
3947
3948 if [ $(hostname) = "plasma" ]
3949 then
3950     setxkbmap -option ctrl:rctrl_ralt  # turn right control into right alt
3951 fi
3952
3953 if [ $(hostname) = "enigma" ]
3954 then
3955     xmodmap -e "keycode 135 = Alt_R"  # remap menu key to alt
3956 fi
3957
3958 light -Scrs "intel_backlight" 2
3959
3960 source $HOME/.zprofile
3961
3962 export _JAVA_AWT_WM_NONREPARENTING=1
3963 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
3964
3965 if [ $(hostname) = "plasma" ]
3966 then
3967     unlock-def-gk.py &
3968 fi
3969
3970 bspwm &
3971 #+end_src
3972
3973 *** X resources
3974
3975 **** Xresources
3976 :PROPERTIES:
3977 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
3978 :END:
3979
3980 #+begin_src conf-xdefaults
3981 #include ".Xresources.d/fonts"
3982 ! #include ".Xresources.d/colors"
3983 #include ".Xresources.d/emacs"
3984 #include ".Xresources.d/rxvt-unicode"
3985 #+end_src
3986
3987 **** Xresources.d
3988
3989 ***** fonts
3990 :PROPERTIES:
3991 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
3992 :END:
3993
3994 #+begin_src conf-xdefaults
3995 Xft.lcdfilter: lcddefault
3996 Xft.antialias: true
3997 Xft.autohint: 0
3998 Xft.hinting: true
3999 Xft.hintstyle: hintslight
4000 ! Xft.hintstyle: hintfull
4001 Xft.rgba: rgb
4002 Xft.dpi: 96
4003 #+end_src
4004
4005 ***** colors
4006 :PROPERTIES:
4007 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
4008 :END:
4009
4010 #+begin_src conf-xdefaults :tangle no
4011 #include "gruvbox-light.xresources"
4012 ! #include "gruvbox-dark.xresources"
4013 #include "gruvbox-urxvt256.xresources"
4014 #+end_src
4015
4016 #+begin_src conf-xdefaults :tangle no
4017 ! -----------------------------------------------------------------------------
4018 ! File: gruvbox-light.xresources
4019 ! Description: Retro groove colorscheme generalized
4020 ! Author: morhetz <morhetz@gmail.com>
4021 ! Source: https://github.com/morhetz/gruvbox-generalized
4022 ! Last Modified: 6 Sep 2014
4023 ! -----------------------------------------------------------------------------
4024
4025 ! hard contrast: *background: #f9f5d7
4026 *background: #fbf1c7
4027 ! soft contrast: *background: #f2e5bc
4028 *foreground: #3c3836
4029 ! Black + DarkGrey
4030 *color0:  #fdf4c1
4031 *color8:  #928374
4032 ! DarkRed + Red
4033 *color1:  #cc241d
4034 *color9:  #9d0006
4035 ! DarkGreen + Green
4036 *color2:  #98971a
4037 *color10: #79740e
4038 ! DarkYellow + Yellow
4039 *color3:  #d79921
4040 *color11: #b57614
4041 ! DarkBlue + Blue
4042 *color4:  #458588
4043 *color12: #076678
4044 ! DarkMagenta + Magenta
4045 *color5:  #b16286
4046 *color13: #8f3f71
4047 ! DarkCyan + Cyan
4048 *color6:  #689d6a
4049 *color14: #427b58
4050 ! LightGrey + White
4051 *color7:  #7c6f64
4052 *color15: #3c3836
4053 #+end_src
4054
4055 #+begin_src conf-xdefaults :tangle no
4056 ! -----------------------------------------------------------------------------
4057 ! File: gruvbox-dark.xresources
4058 ! Description: Retro groove colorscheme generalized
4059 ! Author: morhetz <morhetz@gmail.com>
4060 ! Source: https://github.com/morhetz/gruvbox-generalized
4061 ! Last Modified: 6 Sep 2014
4062 ! -----------------------------------------------------------------------------
4063
4064 ! hard contrast: *background: #1d2021
4065 *background: #282828
4066 ! soft contrast: *background: #32302f
4067 *foreground: #ebdbb2
4068 ! Black + DarkGrey
4069 *color0:  #282828
4070 *color8:  #928374
4071 ! DarkRed + Red
4072 *color1:  #cc241d
4073 *color9:  #fb4934
4074 ! DarkGreen + Green
4075 *color2:  #98971a
4076 *color10: #b8bb26
4077 ! DarkYellow + Yellow
4078 *color3:  #d79921
4079 *color11: #fabd2f
4080 ! DarkBlue + Blue
4081 *color4:  #458588
4082 *color12: #83a598
4083 ! DarkMagenta + Magenta
4084 *color5:  #b16286
4085 *color13: #d3869b
4086 ! DarkCyan + Cyan
4087 *color6:  #689d6a
4088 *color14: #8ec07c
4089 ! LightGrey + White
4090 *color7:  #a89984
4091 *color15: #ebdbb2
4092 #+end_src
4093
4094 #+begin_src conf-xdefaults :tangle no
4095 ! -----------------------------------------------------------------------------
4096 ! File: gruvbox-urxvt256.xresources
4097 ! Description: Retro groove colorscheme generalized
4098 ! Author: morhetz <morhetz@gmail.com>
4099 ! Source: https://github.com/morhetz/gruvbox-generalized
4100 ! Last Modified: 13 Dec 2013
4101 ! -----------------------------------------------------------------------------
4102
4103 URxvt.color24:  #076678
4104 URxvt.color66:  #427b58
4105 URxvt.color88:  #9d0006
4106 URxvt.color96:  #8f3f71
4107 URxvt.color100: #79740e
4108 URxvt.color108: #8ec07c
4109 URxvt.color109: #83a598
4110 URxvt.color130: #af3a03
4111 URxvt.color136: #b57614
4112 URxvt.color142: #b8bb26
4113 URxvt.color167: #fb4934
4114 URxvt.color175: #d3869b
4115 URxvt.color208: #fe8019
4116 URxvt.color214: #fabd2f
4117 URxvt.color223: #ebdbb2
4118 URxvt.color228: #f2e5bc
4119 URxvt.color229: #fbf1c7
4120 URxvt.color230: #f9f5d7
4121 URxvt.color234: #1d2021
4122 URxvt.color235: #282828
4123 URxvt.color236: #32302f
4124 URxvt.color237: #3c3836
4125 URxvt.color239: #504945
4126 URxvt.color241: #665c54
4127 URxvt.color243: #7c6f64
4128 URxvt.color244: #928374
4129 URxvt.color245: #928374
4130 URxvt.color246: #a89984
4131 URxvt.color248: #bdae93
4132 URxvt.color250: #d5c4a1
4133 #+end_src
4134
4135 ***** emacs
4136 :PROPERTIES:
4137 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
4138 :END:
4139
4140 #+begin_src conf-xdefaults
4141 Emacs.menuBar: off
4142 Emacs.toolBar: off
4143 Emacs.verticalScrollBars: off
4144 Emacs.cursorBlink: off
4145 Emacs.FontBackend: xft,x
4146 ! Emacs.font: Ubuntu Mono-12
4147 ! Emacs.font: Triplicate T4C-11
4148 ! Emacs.font: Ubuntu Mono-10.5
4149 ! Emacs.font: Ubuntu Mono-12
4150 ! Emacs.font: Iosevka-11
4151
4152 ! Emacs.font: Fira Mono:size=15
4153 ! Emacs.font: DejaVu Sans Mono:size=15
4154 ! Emacs.font: Inconsolata:size=17
4155 ! Emacs.font: Inconsolata:size=16
4156 ! Emacs.font: Inconsolata LGC:size=14
4157 ! Emacs.font: Source Code Pro Medium-10.5
4158 Emacs.font: Ubuntu Mono:size=16
4159 ! Emacs.font: Iosevka:size=16
4160 #+end_src
4161
4162 ***** rxvt-unicode
4163 :PROPERTIES:
4164 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
4165 :END:
4166
4167 #+begin_src conf-xdefaults
4168 ! Font
4169 URxvt.font:             xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
4170 URxvt.boldFont:         xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
4171 URxvt.italicFont:       xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
4172 URxvt.bolditalicFont:   xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
4173
4174 URxvt.xftAntialias:     true
4175 URxvt.letterSpace:      0
4176
4177 URxvt.depth:                0
4178 URxvt.loginShell:           true
4179 URxvt.saveLines:            100000
4180 URxvt.internalBorder:       3
4181 URxvt.lineSpace:            0
4182 URxvt.scrollBar:            false
4183 URxvt.scrollStyle:          rxvt
4184 URxvt*scrollTtyOutput:      false
4185 URxvt*scrollWithBuffer:     true
4186 URxvt*scrollTtyKeypress:    true
4187 URxvt.keysym.Shift-Up:      command:\033]720;1\007
4188 URxvt.keysym.Shift-Down:    command:\033]721;1\007
4189
4190 URxvt.perl-ext-common:      default,clipboard,url-select,keyboard-select
4191 URxvt.perl-ext:             bidi
4192 URxvt.bidi.enabled:         1
4193 URxvt.url-select.launcher:  firefox
4194 URxvt.url-select.underline: true
4195 URxvt.keysym.M-u:           perl:url-select:select_next
4196 URxvt.keysym.M-Escape:      perl:keyboard-select:activate
4197 URxvt.keysym.M-s:           perl:keyboard-select:search
4198 URxvt.url-launcher:         /usr/bin/firefox
4199 URxvt.matcher.button:       1
4200 URxvt.iso14755:             false
4201 URxvt.iso14755_53:          false
4202 URxvt.keysym.M-c:           perl:clipboard:copy
4203 URxvt.keysym.M-v:           perl:clipboard:paste
4204 URxvt.keysym.C-A-V:         perl:clipboard:paste_escaped
4205 URxvt.keysym.C-Up:          font-size:increase
4206 URxvt.keysym.C-Down:        font-size:decrease
4207 URxvt.keysym.C-S-Up:        font-size:incglobal
4208 URxvt.keysym.C-S-Down:      font-size:decglobal
4209 URxvt.keysym.C-equal:       font-size:reset
4210 !URxvt.keysym.C-question:   font-size:show
4211
4212 URxvt.iconFile:             /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
4213
4214 !urxvt*foreground: white
4215 !urxvt*background: black
4216
4217 !*color0:  #2E3436
4218 !*color1:  #a40000
4219 !*color2:  #4E9A06
4220 !*color3:  #C4A000
4221 !*color4:  #3465A4
4222 !*color5:  #75507B
4223 !*color6:  #ce5c00
4224 !*color7:  #babdb9
4225 !*color8:  #555753
4226 !*color9:  #EF2929
4227 !*color10: #8AE234
4228 !*color11: #FCE94F
4229 !*color12: #729FCF
4230 !*color13: #AD7FA8
4231 !*color14: #fcaf3e
4232 !*color15: #EEEEEC
4233
4234 !URxvt.foreground: #C8C8C8
4235 !URxvt.background: #FFFFFF
4236
4237 !! black
4238 !*color0:  #2E3436
4239 !*color8:  #555753
4240 !! red
4241 !*color1:  #a40000
4242 !*color9:  #EF2929
4243 !! green
4244 !*color2:  #4E9A06
4245 !*color10: #8AE234
4246 !! yellow
4247 !*color3:  #C4A000
4248 !*color11: #FCE94F
4249 !! blue
4250 !*color4:  #3465A4
4251 !*color12: #729FCF
4252 !! purple
4253 !*color5:  #75507B
4254 !*color13: #AD7FA8
4255 !! orange (replaces cyan)
4256 !*color6:  #ce5c00
4257 !*color14: #fcaf3e
4258 !! white
4259 !*color7:  #babdb9
4260 !*color15: #EEEEEC
4261
4262 ! Tango colour theme for rxvt-unicode
4263 URxvt.background: #FFFFFF
4264 URxvt.foreground: #000000
4265
4266 ! Black
4267 URxvt.color0: #2E3436
4268 URxvt.color8: #757773
4269
4270 ! Red
4271 URxvt.color1: #CC0000
4272 URxvt.color9: #EF2929
4273
4274 ! Green
4275 URxvt.color2: #4E9A06
4276 URxvt.color10: #8AE234
4277
4278 ! Yellow
4279 URxvt.color3: #C4A000
4280 URxvt.color11: #FCE94F
4281
4282 ! Blue
4283 URxvt.color4: #3465A4
4284 URxvt.color12: #729FCF
4285
4286 ! Magenta
4287 URxvt.color5: #75507B
4288 URxvt.color13: #AD7FA8
4289
4290 !! Cyan
4291 !URxvt.color6: #06989A
4292 !URxvt.color14: #34E2E2
4293 ! orange (replaces cyan)
4294 *color6:  #ce5c00
4295 *color14: #fcaf3e
4296
4297 ! White
4298 URxvt.color7: #D3D7CF
4299 URxvt.color15: #EEEEEC
4300 #+end_src
4301
4302 ** XDG
4303 :PROPERTIES:
4304 :header-args+: :tangle ~/.config/user-dirs.dirs
4305 :END:
4306
4307 #+begin_src conf
4308 XDG_DESKTOP_DIR="$HOME/Desktop"
4309 XDG_DOCUMENTS_DIR="$HOME/usr/docs"
4310 XDG_DOWNLOAD_DIR="$HOME/usr/dls"
4311 XDG_MUSIC_DIR="$HOME/usr/music"
4312 XDG_PICTURES_DIR="$HOME/usr/pics"
4313 XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
4314 XDG_TEMPLATES_DIR="$HOME/usr/Templates"
4315 XDG_VIDEOS_DIR="$HOME/usr/vids"
4316 #+end_src
4317
4318 ** Zathura
4319 :PROPERTIES:
4320 :header-args+: :tangle ~/.config/zathura/zathurarc
4321 :END:
4322
4323 #+begin_src conf
4324 set smooth-scroll true
4325 set selection-clipboard clipboard
4326 set zoom-step 05
4327 set default-bg "#272727"
4328 set statusbar-bg "#272727"
4329 set inputbar-bg "#373737"
4330 #+end_src
4331
4332 ** Zsh
4333
4334 My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
4335 [[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
4336 installed.
4337
4338 *** zimrc
4339 :PROPERTIES:
4340 :header-args+: :tangle ~/.zimrc
4341 :END:
4342
4343 #+begin_src sh
4344
4345
4346 #################
4347 # CORE SETTINGS #
4348 #################
4349
4350 #
4351 # Zim settings
4352 #
4353
4354 # Select what modules you would like enabled.
4355 # The second line of modules may depend on options set by modules in the first
4356 # line. These dependencies are noted on the respective module's README.md.
4357 zmodules=(directory environment git git-info history input ssh utility custom \
4358           syntax-highlighting history-substring-search prompt completion)
4359
4360
4361 ###################
4362 # MODULE SETTINGS #
4363 ###################
4364
4365 #
4366 # Prompt
4367 #
4368
4369 # Set your desired prompt here
4370 zprompt_theme='pure'
4371 #PURE_PROMPT_SYMBOL=λ
4372 #PURE_PROMPT_SYMBOL=δ
4373 PURE_PROMPT_SYMBOL=➜
4374
4375 #
4376 # Completion
4377 #
4378
4379 # set an optional host-specific filename for the completion cache file
4380 # if none is provided, the default '.zcompdump' is used.
4381 #zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
4382
4383 #
4384 # Utility
4385 #
4386
4387 # Uncomment to enable command correction prompts
4388 # See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
4389 setopt CORRECT
4390
4391 #
4392 # Environment
4393 #
4394
4395 # Set the string below to the desired terminal title format string.
4396 # The terminal title is redrawn upon directory change, however, variables like
4397 # ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
4398 #   http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
4399 # The example below uses the following format: 'username@host:/current/directory'
4400 ztermtitle='%n@%m:%~'
4401
4402 #
4403 # Input
4404 #
4405
4406 # Uncomment to enable double-dot expansion.
4407 # This appends '../' to your input for each '.' you type after an initial '..'
4408 #zdouble_dot_expand='true'
4409
4410 #
4411 # Syntax-Highlighting
4412 #
4413
4414 # This determines what highlighters will be used with the syntax-highlighting module.
4415 # Documentation of the highlighters can be found here:
4416 #   https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
4417 # For (u)rxvt, termite and gnome-terminal users,
4418 # removing the 'cursor' highlighter will fix the disappearing cursor problem
4419 #zhighlighters=(main brackets cursor)
4420 zhighlighters=(main brackets pattern)
4421
4422
4423 #
4424 # SSH
4425 #
4426
4427 # Load these ssh identities with the ssh module
4428 zssh_ids=(id_rsa plasma_id_rsa id_ed25519 id_rsa_aur)
4429
4430
4431 #
4432 # Pacman
4433 #
4434
4435 # Set (optional) pacman front-end.
4436 zpacman_frontend='yay'
4437
4438 # Load any helper scripts as defined here
4439 #zpacman_helper=(aur)
4440 #+end_src
4441
4442 *** zlogin
4443 :PROPERTIES:
4444 :header-args+: :tangle ~/.zlogin
4445 :END:
4446
4447 #+begin_src sh
4448
4449
4450 #
4451 # User configuration sourced by login shells
4452 #
4453
4454 # Initialize zim
4455 [[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
4456 #+end_src
4457
4458 *** zprofile
4459 :PROPERTIES:
4460 :header-args+: :tangle ~/.zprofile
4461 :END:
4462
4463 #+begin_src sh
4464 #PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
4465 #PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
4466 export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
4467 export XDG_CONFIG_HOME=$HOME/.config
4468 export XDG_DATA_HOME=$HOME/.local/share
4469 export XDG_DATA_DIRS=/usr/local/share:/usr/share
4470 export MAILDIR="$HOME/mail"
4471 export CVS_RSH=ssh
4472 #export MATHMODELS=$HOME/src/eiffel/mathmodels
4473 #export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
4474 #export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
4475
4476 # Eiffel2Java stuff
4477 #export JAVA_HOME=/usr/lib/jvm/default
4478 #export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
4479 #export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4480 #export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4481
4482 #export PATH="$HOME/usr/build/pvs:$PATH"
4483 #export SBCLISP_HOME=/usr/share/sbcl-source
4484 #export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
4485
4486 export MOZ_USE_XINPUT2=1  # precise scrolling in firefox
4487
4488 #export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
4489 #export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
4490
4491 if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
4492 #+end_src
4493
4494 *** zshenv
4495 :PROPERTIES:
4496 :header-args+: :tangle ~/.zshenv
4497 :END:
4498
4499 #+begin_src sh
4500 # Ensure that a non-login, non-interactive shell has a defined environment.
4501 if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
4502   source "${ZDOTDIR:-$HOME}/.zprofile"
4503 fi
4504 #+end_src
4505
4506 *** zshrc
4507 :PROPERTIES:
4508 :header-args+: :tangle ~/.zshrc
4509 :END:
4510
4511 #+begin_src sh
4512 # Bash-like navigation
4513 #export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
4514 #export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
4515 export WORDCHARS='*?[]~=&;!#$%^(){}<>'
4516 #ZLE_SPACE_SUFFIX_CHARS=$'|&'
4517
4518 #disable -r time       # disable shell reserved word
4519 #alias time='time -p'  # -p for POSIX output
4520
4521 # rehash if last command was pacaur or pacman
4522 # (so that zsh picks up changes in $PATH immediately)
4523 TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
4524
4525 #
4526 # User configuration sourced by interactive shells
4527 #
4528
4529 # Change default zim location
4530 export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
4531
4532 # Start zim
4533 [[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
4534
4535 ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
4536 #ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
4537
4538 setopt globdots
4539
4540 source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
4541 source ~/.zsh/zsh-autopair/autopair.zsh
4542
4543
4544 ### fzf ###
4545
4546 source /usr/share/fzf/key-bindings.zsh
4547 source /usr/share/fzf/completion.zsh
4548
4549 # Accept history selection instead of putting it on
4550 # the command line
4551 fzf-history-widget-accept() {
4552   fzf-history-widget
4553   zle accept-line
4554 }
4555 #zle     -N   fzf-history-widget-accept
4556 #bindkey '^R' fzf-history-widget-accept
4557
4558 # alt+c preview
4559 export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
4560
4561 ### fzf ###
4562
4563
4564 # aliases
4565 alias mpv="mpv --ytdl-format mp4"
4566 alias mv="mv -iv"
4567 alias cp="cp -iv"
4568 alias scl=systemctl
4569 alias jcl=journalctl
4570 alias m="mbsync -Va; getmail; notmuch new"
4571 alias best="youtube-dl -f best"
4572 alias nixx="ssh amin@nix.aminb.org"
4573 alias fence="ssh aminb@fencepost.gnu.org"
4574
4575 aur() {
4576    cd ~/usr/build
4577    git clone https://aur.archlinux.org/${1}.git
4578    cd ${1}
4579 }
4580
4581 # i-beam cursor
4582 echo -e "\033[5 q"
4583 #echo -e "\033[6 q"
4584 #+end_src
4585
4586 * Scripts
4587
4588 This section contains various useful scripts and the ones used by the
4589 programs above. For instance, =toggle-tablet= for switching to and
4590 from tablet mode on my X220T, =toggle-presentation-mode= for toggling
4591 Xfce's presentation mode which keeps the screen awake, and
4592 =rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
4593 exact brightness value.
4594
4595 ** rofi-light
4596 :PROPERTIES:
4597 :header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
4598 :END:
4599
4600 #+begin_src bash
4601 cur=$(light -G)
4602 val=$(rofi -dmenu -mesg "light    $cur" -p "light -S " -l 0 -width 12)
4603 light -S $val
4604 #+end_src
4605
4606 ** toggle-layout
4607 :PROPERTIES:
4608 :header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
4609 :END:
4610
4611 #+begin_src bash
4612 lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
4613
4614 if [ "$lang" = "us" ]; then
4615     setxkbmap ir
4616 else
4617     setxkbmap us
4618     # xmodmap $HOME/.Xmodmap
4619 fi
4620 #+end_src
4621
4622 ** toggle-presentation-mode
4623 :PROPERTIES:
4624 :header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
4625 :END:
4626
4627 #+begin_src bash
4628 xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
4629 #+end_src
4630
4631 ** toggle-tablet
4632 :PROPERTIES:
4633 :header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
4634 :END:
4635
4636 This script toggles between a 'normal' mode and a 'tablet' mode, doing
4637 a few things:
4638
4639 - rotates the screen using =xrandr=, so that rotating the physical
4640   display of my X220t would have the laptop's battery on the right
4641   hand side,
4642 - enables touch screen,
4643 - properly rotates the stylus pen and touch screen pointers, and
4644 - toggles between RGB and Vertical BGR sub-pixel order.
4645
4646 #+begin_src bash
4647 case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
4648     0)  # Screen is not rotated, we should rotate it right (90°)
4649            xrandr -o 3
4650            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
4651            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
4652            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
4653            xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
4654            ;;
4655     1)  # Currently top is rotated right, we should set it normal (0°)
4656           xrandr -o 0
4657           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
4658           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
4659           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
4660           xfconf-query -c xsettings -p /Xft/RGBA -s rgb
4661           ;;
4662     *)
4663            echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
4664            exit 1
4665            ;;
4666 esac
4667 #+end_src
4668
4669 ** unlock-def-gk.py
4670 :PROPERTIES:
4671 :header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
4672 :END:
4673
4674 #+begin_src python
4675 import gnomekeyring as gk
4676 # list_item_ids_sync('login')[0] == 1L
4677 gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
4678 #+end_src
4679
4680 ** wp
4681
4682 My little wallpaper changer script.
4683
4684 *** wp
4685 :PROPERTIES:
4686 :header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
4687 :END:
4688
4689 #+begin_src bash :tangle no
4690 export DISPLAY=:0
4691
4692 case "$1" in
4693   "day")
4694     feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
4695     ;;
4696   "night")
4697     feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
4698     ;;
4699   *)
4700     echo $"Usage: $0 {day|night}"
4701     exit 1
4702 esac
4703 #+end_src
4704
4705 *** wp-auto
4706 :PROPERTIES:
4707 :header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
4708 :END:
4709
4710 #+begin_src bash :tangle no
4711 SED=$(which sed)
4712 ROFI=$(which rofi)
4713
4714 export DISPLAY=:0
4715 HOUR=$(date +%H)
4716
4717 if [ -z "${SED}" ]
4718 then
4719     echo "Did not find 'sed', script cannot continue."
4720     exit 1
4721 fi
4722 if [ -z "${ROFI}" ]
4723 then
4724     echo "Did not find rofi, there is no point to continue."
4725     exit 1
4726 fi
4727
4728 ###
4729 # Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
4730 # Repeated calls should leave the config clean-ish
4731 ###
4732 function set_theme()
4733 {
4734     CDIR="${HOME}/.config/rofi/"
4735     if [ ! -d "${CDIR}" ]
4736     then
4737         mkdir -p ${CDIR}
4738     fi
4739     if [ -f "${CDIR}/config" ]
4740     then
4741         ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
4742     fi
4743     echo "rofi.theme: ${1}" >> "${CDIR}/config"
4744
4745 }
4746
4747 if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
4748     then
4749         feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
4750         xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
4751         set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
4752     else
4753         feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
4754         xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
4755         set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
4756 fi
4757 #+end_src
4758
4759 *** wp.service
4760 :PROPERTIES:
4761 :header-args+: :tangle ~/.config/systemd/user/wp.service
4762 :END:
4763
4764 #+begin_src conf :tangle no
4765 [Unit]
4766 Description=wallpaper service
4767
4768 [Service]
4769 Type=oneshot
4770 ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
4771 #+end_src
4772
4773 *** wp.timer
4774 :PROPERTIES:
4775 :header-args+: :tangle ~/.config/systemd/user/wp.timer
4776 :END:
4777
4778 #+begin_src conf :tangle no
4779 [Unit]
4780 [Unit]
4781 Description=wallpaper timer
4782
4783 [Timer]
4784 OnCalendar=07,21:00
4785 Unit=wp.service
4786 Persistent=true
4787
4788 [Install]
4789 WantedBy=timers.target
4790 #+end_src
4791
4792 ** zathura-sync.sh
4793 :PROPERTIES:
4794 :header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
4795 :END:
4796
4797 #+begin_src sh
4798 pos="$1"
4799 pdffile="$2"
4800 zathura --synctex-forward "$pos" "$pdffile" || \
4801     (
4802     zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
4803     sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
4804 #+end_src
4805 ** Fun :)
4806
4807 *** eat-em
4808 :PROPERTIES:
4809 :header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
4810 :END:
4811
4812 #+begin_src sh
4813 # Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
4814 # [ESC] character in original post removed here.
4815
4816 # ANSI Color -- use these variables to easily have different color
4817 #    and format output. Make sure to output the reset sequence after
4818 #    colors (f = foreground, b = background), and use the 'off'
4819 #    feature for anything you turn on.
4820
4821 initializeANSI()
4822 {
4823  esc="$(echo -en '\e')"
4824
4825   blackf="${esc}[30m";   redf="${esc}[31m";    greenf="${esc}[32m"
4826   yellowf="${esc}[33m"   bluef="${esc}[34m";   purplef="${esc}[35m"
4827   cyanf="${esc}[36m";    whitef="${esc}[37m"
4828
4829   blackb="${esc}[40m";   redb="${esc}[41m";    greenb="${esc}[42m"
4830   yellowb="${esc}[43m"   blueb="${esc}[44m";   purpleb="${esc}[45m"
4831   cyanb="${esc}[46m";    whiteb="${esc}[47m"
4832
4833   boldon="${esc}[1m";    boldoff="${esc}[22m"
4834   italicson="${esc}[3m"; italicsoff="${esc}[23m"
4835   ulon="${esc}[4m";      uloff="${esc}[24m"
4836   invon="${esc}[7m";     invoff="${esc}[27m"
4837
4838   reset="${esc}[0m"
4839 }
4840
4841 # note in this first use that switching colors doesn't require a reset
4842 # first - the new color overrides the old one.
4843
4844 #clear
4845
4846 initializeANSI
4847
4848 cat << EOF
4849
4850  ${yellowf}  ▄███████▄${reset}   ${redf}  ▄██████▄${reset}    ${greenf}  ▄██████▄${reset}    ${bluef}  ▄██████▄${reset}    ${purplef}  ▄██████▄${reset}    ${cyanf}  ▄██████▄${reset}
4851  ${yellowf}▄█████████▀▀${reset}  ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset}  ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset}  ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset}  ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset}  ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
4852  ${yellowf}███████▀${reset}      ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset}  ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset}  ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset}  ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset}  ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
4853  ${yellowf}███████▄${reset}      ${redf}████████████${reset}  ${greenf}████████████${reset}  ${bluef}████████████${reset}  ${purplef}████████████${reset}  ${cyanf}████████████${reset}
4854  ${yellowf}▀█████████▄▄${reset}  ${redf}██▀██▀▀██▀██${reset}  ${greenf}██▀██▀▀██▀██${reset}  ${bluef}██▀██▀▀██▀██${reset}  ${purplef}██▀██▀▀██▀██${reset}  ${cyanf}██▀██▀▀██▀██${reset}
4855  ${yellowf}  ▀███████▀${reset}   ${redf}▀   ▀  ▀   ▀${reset}  ${greenf}▀   ▀  ▀   ▀${reset}  ${bluef}▀   ▀  ▀   ▀${reset}  ${purplef}▀   ▀  ▀   ▀${reset}  ${cyanf}▀   ▀  ▀   ▀${reset}
4856
4857  ${boldon}${yellowf}  ▄███████▄   ${redf}  ▄██████▄    ${greenf}  ▄██████▄    ${bluef}  ▄██████▄    ${purplef}  ▄██████▄    ${cyanf}  ▄██████▄${reset}
4858  ${boldon}${yellowf}▄█████████▀▀  ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄  ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄  ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄  ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄  ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
4859  ${boldon}${yellowf}███████▀      ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███  ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███  ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███  ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███  ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
4860  ${boldon}${yellowf}███████▄      ${redf}████████████  ${greenf}████████████  ${bluef}████████████  ${purplef}████████████  ${cyanf}████████████${reset}
4861  ${boldon}${yellowf}▀█████████▄▄  ${redf}██▀██▀▀██▀██  ${greenf}██▀██▀▀██▀██  ${bluef}██▀██▀▀██▀██  ${purplef}██▀██▀▀██▀██  ${cyanf}██▀██▀▀██▀██${reset}
4862  ${boldon}${yellowf}  ▀███████▀   ${redf}▀   ▀  ▀   ▀  ${greenf}▀   ▀  ▀   ▀  ${bluef}▀   ▀  ▀   ▀  ${purplef}▀   ▀  ▀   ▀  ${cyanf}▀   ▀  ▀   ▀${reset}
4863
4864 EOF
4865 #+end_src
4866
4867 *** invade-em
4868 :PROPERTIES:
4869 :header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
4870 :END:
4871
4872 #+begin_src bash
4873 #
4874 # ANSI color scheme script featuring Space Invaders
4875 #
4876 # Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
4877 # Modified by lolilolicon
4878 #
4879
4880 f=3 b=4
4881 for j in f b; do
4882   for i in {0..7}; do
4883     printf -v $j$i %b "\e[${!j}${i}m"
4884   done
4885 done
4886 bld=$'\e[1m'
4887 rst=$'\e[0m'
4888
4889 cat << EOF
4890
4891  $f1  ▀▄   ▄▀     $f2 ▄▄▄████▄▄▄    $f3  ▄██▄     $f4  ▀▄   ▄▀     $f5 ▄▄▄████▄▄▄    $f6  ▄██▄  $rst
4892  $f1 ▄█▀███▀█▄    $f2███▀▀██▀▀███   $f3▄█▀██▀█▄   $f4 ▄█▀███▀█▄    $f5███▀▀██▀▀███   $f6▄█▀██▀█▄$rst
4893  $f1█▀███████▀█   $f2▀▀███▀▀███▀▀   $f3▀█▀██▀█▀   $f4█▀███████▀█   $f5▀▀███▀▀███▀▀   $f6▀█▀██▀█▀$rst
4894  $f1▀ ▀▄▄ ▄▄▀ ▀   $f2 ▀█▄ ▀▀ ▄█▀    $f3▀▄    ▄▀   $f4▀ ▀▄▄ ▄▄▀ ▀   $f5 ▀█▄ ▀▀ ▄█▀    $f6▀▄    ▄▀$rst
4895
4896  $bld$f1▄ ▀▄   ▄▀ ▄   $f2 ▄▄▄████▄▄▄    $f3  ▄██▄     $f4▄ ▀▄   ▄▀ ▄   $f5 ▄▄▄████▄▄▄    $f6  ▄██▄  $rst
4897  $bld$f1█▄█▀███▀█▄█   $f2███▀▀██▀▀███   $f3▄█▀██▀█▄   $f4█▄█▀███▀█▄█   $f5███▀▀██▀▀███   $f6▄█▀██▀█▄$rst
4898  $bld$f1▀█████████▀   $f2▀▀▀██▀▀██▀▀▀   $f3▀▀█▀▀█▀▀   $f4▀█████████▀   $f5▀▀▀██▀▀██▀▀▀   $f6▀▀█▀▀█▀▀$rst
4899  $bld$f1 ▄▀     ▀▄    $f2▄▄▀▀ ▀▀ ▀▀▄▄   $f3▄▀▄▀▀▄▀▄   $f4 ▄▀     ▀▄    $f5▄▄▀▀ ▀▀ ▀▀▄▄   $f6▄▀▄▀▀▄▀▄$rst
4900
4901
4902                                      $f7▌$rst
4903
4904                                    $f7▌$rst
4905
4906                               $f7    ▄█▄    $rst
4907                               $f7▄█████████▄$rst
4908                               $f7▀▀▀▀▀▀▀▀▀▀▀$rst
4909
4910 EOF
4911 #+end_src