git.shemshak.org - ~bandali/configs/blob - rc.org

   1 #+title: rc.org
   2 #+property: header-args :comments link :mkdirp yes :results silent
   3
   4 * About
   5
   6 This org file contains the configuration files of pretty much every
   7 program I use. The files are tangled (i.e. exported, or derived) from
   8 this file using =org-babel=.
   9
  10 Note: This file is best viewed inside Emacs with org mode.
  11
  12 * Configs
  13
  14 This section contains the configuration files (dotfiles) of various
  15 programs I use.
  16
  17 ** bspwm
  18
  19 *** bspwmrc
  20 :PROPERTIES:
  21 :header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
  22 :END:
  23
  24 #+begin_src sh :tangle no
  25 sxhkd &
  26 sh ~/.fehbg &
  27 xfce4-panel -d &
  28 compton &
  29 sleep 0.5 && pasystray --notify=all &
  30
  31 bspc monitor -d I II III IV V VI VII VIII IX X
  32 #bspc monitor eDP-1 -d I II III IV V
  33 #bspc monitor HDMI-1 -d VI VII VIII IX X
  34
  35 #bspc config border_width         2
  36 #bspc config window_gap           8
  37 bspc config window_gap           0
  38
  39 bspc config bottom_padding 26
  40
  41 bspc config split_ratio          0.52
  42 bspc config borderless_monocle   true
  43 bspc config gapless_monocle      true
  44 bspc config click_to_focus       button1
  45 bspc config directional_focus_tightness low
  46
  47 #bspc rule -a Firefox desktop='^1' follow=on
  48 bspc rule -a Nightly desktop='^1' follow=on
  49 bspc rule -a Emacs desktop='^2' state=tiled follow=on
  50 #bspc rule -a Chromium desktop='^4' follow=on
  51 bspc rule -a URxvt state=floating
  52 bspc rule -a URxvt:tiled state=tiled
  53 bspc rule -a Connman-gtk state=floating
  54 bspc rule -a Xfce4-panel state=floating
  55 bspc rule -a TelegramDesktop state=floating
  56 bspc rule -a Ec state=floating
  57 bspc rule -a Pavucontrol state=floating
  58 bspc rule -a Eog state=floating
  59 bspc rule -a Seahorse state=floating
  60 bspc rule -a mpv state=floating
  61 bspc rule -a Evince state=floating
  62 bspc rule -a Meld state=floating
  63 bspc rule -a Autokey-gtk state=floating
  64 bspc rule -a Mousepad state=floating
  65 bspc rule -a Wrapper-1.0 state=floating
  66 bspc rule -a File-roller state=floating
  67 bspc rule -a Gnome-disks state=floating
  68 bspc rule -a Termite state=floating
  69 bspc rule -a Termite:tiled state=tiled
  70 bspc rule -a Thunderbird:Calendar state=floating
  71 bspc rule -a Audacity state=floating
  72 bspc rule -a Proof state=floating # pvs x-show-proof
  73 bspc rule -a Nm-connection-editor state=floating
  74 bspc rule -a Wire state=floating
  75 bspc rule -a discord state=floating
  76 bspc rule -a X2goclient state=floating
  77 bspc rule -a SimpleScreenRecorder state=floating
  78 bspc rule -a Gimp state=floating
  79 bspc rule -a Wrapper-2.0 state=floating
  80 bspc rule -a Zathura state=tiled
  81 #+end_src
  82
  83 *** sxhkdrc
  84 :PROPERTIES:
  85 :header-args+: :tangle ~/.config/sxhkd/sxhkdrc
  86 :END:
  87
  88 #+begin_src conf :tangle no
  89 #
  90 # wm independent hotkeys
  91 #
  92
  93 # terminal emulator
  94 super + {_,shift} + Return
  95         urxvt{_, -name tiled}
  96
  97 #super + {_,shift} + Return
  98 #       termite{_, --name=tiled}
  99
 100 # program launcher
 101 super + space
 102         rofi -show run -display-run '> ' -display-window ' 🗔 '
 103
 104 super + alt + space
 105         xfce4-popup-whiskermenu
 106
 107 # window finder
 108 super + backslash
 109         rofi -show window  -display-run '> ' -display-window ' 🗔 '
 110
 111 # password manager
 112 alt + space
 113         rofi-pass
 114
 115 # firefox
 116 #super + r
 117 #       firefox
 118
 119 # chromium
 120 #super + c
 121 #       chromium -incognito
 122
 123 # emacs
 124 super + e
 125         emacs
 126
 127 # make sxhkd reload its configuration files:
 128 super + Escape
 129         pkill -USR1 -x sxhkd
 130
 131 # volume {up,down}
 132 XF86Audio{Raise,Lower}Volume
 133         pamixer --allow-boost --{in,de}crease 5
 134
 135 # mute
 136 XF86AudioMute
 137         pamixer --toggle-mute
 138
 139 XF86AudioMicMute
 140         pactl set-source-mute 1 toggle
 141
 142 # playback control
 143 XF86Audio{Play,Prev,Next}
 144         mpc {toggle,prev,next}
 145
 146 # lock the screen
 147 super + shift + q
 148         light-locker-command -l
 149
 150 # Toggle keyboard layout
 151 super + F7
 152         toggle-layout
 153
 154 # Toggle Xfce presentation mode
 155 XF86LaunchB
 156         toggle-presentation-mode
 157
 158 # monitor brightness
 159 XF86MonBrightness{Up,Down}
 160         light -{A,U} 5
 161
 162 super + apostrophe
 163         rofi-light
 164
 165 # keyboard brightness
 166 #XF86KbdBrightness{Up,Down}
 167 #       kbdlight {up,down}
 168
 169 XF86RotateWindows
 170         toggle-tablet
 171
 172 #
 173 # bspwm hotkeys
 174 #
 175
 176 # quit bspwm normally
 177 super + alt + Escape
 178         bspc quit
 179
 180 # close and kill
 181 super + {w,q}
 182         bspc node -{c,k}
 183
 184 # alternate between the tiled and monocle layout
 185 super + m
 186         bspc desktop -l next
 187
 188 # send the newest marked node to the newest preselected node
 189 super + y
 190         bspc node newest.marked.local -n newest.!automatic.local
 191
 192 # swap the current node and the biggest node
 193 super + g
 194         bspc node -s biggest
 195
 196 #
 197 # state/flags
 198 #
 199
 200 # set the window state
 201 super + {t,shift + t,s,f}
 202         bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
 203
 204 # set the node flags
 205 super + ctrl + {m,x,y,z}
 206         bspc node -g {marked,locked,sticky,private}
 207
 208 #
 209 # focus/swap
 210 #
 211
 212 # focus the node in the given direction
 213 super + {_,shift + }{h,j,k,l}
 214         bspc node -{f,s} {west,south,north,east}
 215
 216 # focus the node for the given path jump
 217 super + {p,b,comma,period}
 218         bspc node -f @{parent,brother,first,second}
 219
 220 # focus the next/previous node in the current desktop
 221 super + {_,shift + }c
 222         bspc node -f {next,prev}.local
 223
 224 # focus the next/previous desktop in the current monitor
 225 super + bracket{left,right}
 226         bspc desktop -f {prev,next}.local
 227
 228 # send to next/prev desktop
 229 super + shift + bracket{left,right}
 230         bspc node -d {prev,next} --follow
 231
 232 # focus the last node/desktop
 233 super + {grave,Tab}
 234         bspc {node,desktop} -f last
 235
 236 # focus the older or newer node in the focus history
 237 super + {o,i}
 238         bspc wm -h off; \
 239         bspc node {older,newer} -f; \
 240         bspc wm -h on
 241
 242 # focus or send to the given desktop
 243 super + {_,shift + }{1-9,0}
 244         bspc {desktop -f,node -d} '^{1-9,10}'
 245
 246 #
 247 # preselect
 248 #
 249
 250 # preselect the direction
 251 super + ctrl + {h,j,k,l}
 252         bspc node -p {west,south,north,east}
 253
 254 # preselect the ratio
 255 super + ctrl + {1-9}
 256         bspc node -o 0.{1-9}
 257
 258 # cancel the preselection for the focused node
 259 super + ctrl + space
 260         bspc node -p cancel
 261
 262 # cancel the preselection for the focused desktop
 263 super + ctrl + shift + space
 264         bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
 265
 266 #
 267 # move/resize
 268 #
 269
 270 # expand a window by moving one of its side outward
 271 super + alt + {h,j,k,l}
 272         bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
 273
 274 # contract a window by moving one of its side inward
 275 super + alt + shift + {h,j,k,l}
 276         bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
 277
 278 # move a floating window
 279 super + {Left,Down,Up,Right}
 280         bspc node -v {-20 0,0 20,0 -20,20 0}
 281
 282 #alt + bracket{left,right}
 283 #       xdotool key --clearmodifiers ctrl+Page_{Up,Down}
 284 #+end_src
 285
 286 ** compton
 287 :PROPERTIES:
 288 :header-args+: :tangle ~/.config/compton.conf
 289 :END:
 290
 291 #+begin_src conf :tangle no
 292 # Shadow
 293 shadow = false;                 # Enabled client-side shadows on windows.
 294 no-dock-shadow = true;          # Avoid drawing shadows on dock/panel windows.
 295 no-dnd-shadow = true;           # Don't draw shadows on DND windows.
 296 clear-shadow = true;            # Zero the part of the shadow's mask behind the
 297                                 # window. Fix some weirdness with ARGB windows.
 298 shadow-radius = 5;              # The blur radius for shadows. (default 12)
 299 shadow-offset-x = -5;           # The left offset for shadows. (default -15)
 300 shadow-offset-y = -5;           # The top offset for shadows. (default -15)
 301 # shadow-opacity = 0.7;         # The translucency for shadows. (default .75)
 302 # shadow-red = 0.0;             # Red color value of shadow. (0.0 - 1.0, defaults to 0)
 303 # shadow-green = 0.0;           # Green color value of shadow. (0.0 - 1.0, defaults to 0)
 304 # shadow-blue = 0.0;            # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
 305 shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ];    # Exclude conditions for shadows.
 306 # shadow-exclude = "n:e:Notification";
 307 #shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
 308 shadow-ignore-shaped = true;    # Avoid drawing shadow on all shaped windows
 309                                 # (see also: --detect-rounded-corners)
 310
 311 # Opacity
 312 menu-opacity = 1.0;                     # The opacity for menus. (default 1.0)
 313 #inactive-opacity = 0.9;                        # Default opacity of inactive windows. (0.0 - 1.0)
 314 # active-opacity = 0.8;                 # Default opacity for active windows. (0.0 - 1.0)
 315 frame-opacity = 1.0;                    # Opacity of window titlebars and borders. (0.1 - 1.0)
 316 # inactive-opacity-override = true;     # Let inactive opacity set by 'inactive-opacity' overrides
 317                                         # value of _NET_WM_OPACITY. Bad choice.
 318 alpha-step = 0.06;                      # XRender backend: Step size for alpha pictures. Increasing
 319                                         # it may result in less X resource usage,
 320                                         # Yet fading may look bad.
 321 #inactive-dim = 0.5;                    # Dim inactive windows. (0.0 - 1.0)
 322 #inactive-dim-fixed = true;             # Do not let dimness adjust based on window opacity.
 323 # blur-background = true;               # Blur background of transparent windows.
 324                                         # Bad performance with X Render backend.
 325                                         # GLX backend is preferred.
 326 # blur-background-frame = true;         # Blur background of opaque windows with transparent
 327                                         # frames as well.
 328 blur-background-fixed = true;           # Do not let blur radius adjust based on window opacity.
 329 blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
 330                                         # Exclude conditions for background blur.
 331
 332 # Fading
 333 fading = false;                 # Fade windows during opacity changes.
 334 fade-delta = 3;         # The time between steps in a fade in milliseconds. (default 10).
 335 fade-in-step = 0.03;            # Opacity change between steps while fading in. (default 0.028).
 336 fade-out-step = 0.03;           # Opacity change between steps while fading out. (default 0.03).
 337 # no-fading-openclose = true;   # Avoid fade windows in/out when opening/closing.
 338 fade-exclude = [ ];             # Exclude conditions for fading.
 339
 340 # Other
 341 backend = "glx"                 # Backend to use: "xrender" or "glx". GLX backend is typically
 342                                 # much faster but depends on a sane driver.
 343 mark-wmwin-focused = true;      # Try to detect WM windows and mark them as active.
 344 mark-ovredir-focused = true;    # Mark all non-WM but override-redirect windows active (e.g. menus).
 345 use-ewmh-active-win = true;     # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
 346                                 # instead of using FocusIn/Out events. Usually more reliable but
 347                                 # depends on a EWMH-compliant WM.
 348 detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
 349 detect-client-opacity = true;   # Detect _NET_WM_OPACITY on client windows, useful for window
 350                                 # managers not passing _NET_WM_OPACITY of client windows to frame
 351                                 # windows.
 352 refresh-rate = 0;               # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
 353 vsync = "drm";                  # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
 354                                 # See man page for more details.
 355 dbe = false;                    # Enable DBE painting mode. Rarely needed.
 356 paint-on-overlay = true;        # Painting on X Composite overlay window. Recommended.
 357 sw-opti = false;                # Limit compton to repaint at most once every 1 / refresh_rate.
 358                                 # Incompatible with certain VSync methods.
 359 unredir-if-possible = false;    # Unredirect all windows if a full-screen opaque window is
 360                                 # detected, to maximize performance for full-screen windows.
 361 focus-exclude = [ ];            # A list of conditions of windows that should always be considered
 362                                 # focused.
 363 detect-transient = true;        # Use WM_TRANSIENT_FOR to group windows, and consider windows in
 364                                 # the same group focused at the same time.
 365 detect-client-leader = true;    # Use WM_CLIENT_LEADER to group windows.
 366 invert-color-include = [ ];     # Conditions for windows to be painted with inverted color.
 367
 368 # GLX backend                   # GLX backend fine-tune options. See man page for more info.
 369 glx-no-stencil = true;          # Recommended.
 370 glx-copy-from-front = false;    # Useful with --glx-swap-method,
 371 # glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
 372 # glx-no-rebind-pixmap = true;  # Recommended if it works.
 373 glx-no-rebind-pixmap = true;    # Recommended if it works.
 374 #glx-swap-method = "4"; # See man page.
 375 glx-swap-method = "4";  # See man page.
 376
 377 # Window type settings
 378 wintypes:
 379 {
 380   tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
 381   menu = { shadow = false; };
 382   dropdown_menu = { shadow = false; };
 383   popup_menu =  { shadow = false; };
 384   utility =  { shadow = false; };
 385   # fade: Fade the particular type of windows.
 386   # shadow: Give those windows shadow
 387   # opacity: Default opacity for the type of windows.
 388   # focus: Whether to always consider windows of this type focused.
 389 };
 390 #+end_src
 391
 392 ** Dunst
 393 :PROPERTIES:
 394 :header-args+: :tangle ~/.config/dunst/dunstrc
 395 :END:
 396
 397 #+begin_src conf
 398 [global]
 399 #font = Ubuntu Mono 10.5
 400 font = Inconsolata 11
 401
 402 # Path to default icons.
 403 icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
 404
 405 icon_position = left
 406 # <b>bold</b>
 407 # <i>italic</i>
 408 # <s>strikethrough<s/>
 409 # <u>underline</u>
 410 markup = full
 411 # The format of the message. Possible variables are:
 412 #   %a  appname
 413 #   %s  summary
 414 #   %b  body
 415 #   %i  iconname (including its path)
 416 #   %I  iconname (without its path)
 417 #   %p  progress value if set ([  0%] to [100%]) or nothing
 418 # Markup is allowed
 419 format = "<b>%s</b>\n%b"
 420 # Sort messages by urgency
 421 sort = yes
 422 # Show how many messages are currently hidden (because of geometry)
 423 indicate_hiddenl= no
 424 # Alignment of message text.
 425 # Possible values are "left", "center" and "right"
 426 alignment = center
 427 # The frequency with wich text that is longer than the notification
 428 # window allows bounces back and forth.
 429 # This option conflicts with 'word_wrap'.
 430 # Set to 0 to disable
 431 bounce_freq = 3
 432 # show age of message if message is older than show_age_threshold seconds.
 433 # set to -1 to disable
 434 show_age_threshold = -1
 435 # split notifications into multiple lines if they don't fit into geometry
 436 word_wrap = yes
 437 # ignore newlines '\n' in notifications
 438 ignore_newline = no
 439 # The geometry of the message window.
 440 # geometry [{width}]x{height}][+/-{x}+/-{y}]
 441 # The height is measured in number of notifications everything else in pixels. If the width
 442 # is omitted but the height is given ("-geometry x2"), the message window
 443 # expands over the whole screen (dmenu-like). If width is 0,
 444 # the window expands to the longest message displayed.
 445 # A positive x is measured from the left, a negative from the
 446 # right side of the screen.  Y is measured from the top and down respectevly.
 447 # The width can be negative. In this case the actual width is the
 448 # screen width minus the width defined in within the geometry option.
 449 #geometry = "410x12-12+12"
 450 #geometry = "0x0-30-30"
 451 geometry = "260x12-30-30"
 452 # The transparency of the window. range: [0; 100]
 453 # This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
 454 transparency = 0
 455 # Don't remove messages, if the user is idle (no mouse or keyboard input)
 456 # for longer than idle_threshold seconds.
 457 # Set to 0 to disable.
 458 idle_threshold = 120
 459 # Which monitor should the notifications be displayed on.
 460 monitor = 0
 461 # Display notification on focused monitor. Possible modes are:
 462 # mouse: follow mouse pointer
 463 # keyboard: follow window with keyboard focus
 464 # none: don't follow anything
 465 #
 466 # "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
 467 # This should be the case for almost all modern windowmanagers.
 468 #
 469 # If this option is set to mouse or keyboard, the monitor option will be
 470 # ignored.
 471 follow = keyboard
 472 # should a notification popped up from history be sticky or
 473 # timeout as if it would normally do.
 474 sticky_history = yes
 475 # The height of a single line. If the height is smaller than the font height,
 476 # it will get raised to the font height.
 477 # This adds empty space above and under the text.
 478 line_height = 0
 479
 480 show_indicators = yes
 481
 482 # Draw a line of 'separatpr_height' pixel height between two notifications.
 483 # Set to 0 to disable
 484 separator_height = 3
 485 # padding between text and separator
 486 padding = 8
 487 # horizontal padding
 488 horizontal_padding = 8
 489 # Define a color for the separator.
 490 # possible values are:
 491 #  * auto: dunst tries to find a color fitting to the background
 492 #  * foreground: use the same color as the foreground
 493 #  * frame: use the same color as the frame.
 494 #  * anything else will be interpreted as a X color
 495 separator_color = foreground
 496 # print a notification on startup
 497 # This is mainly for error detection, since dbus (re-)starts dunst
 498 # automatically after a crash.
 499 startup_notification = false
 500 # dmenu path
 501 #dmenu = /usr/bin/dmenu -p dunst:
 502 dmenu = /usr/bin/rofi -dmenu -p dunst:
 503 # browser for opening urls in context menu
 504 browser = /usr/bin/firefox -new-tab
 505 [frame]
 506 width = 0
 507 color = "#377222"
 508 [shortcuts]
 509 # shortcuts are specified as [modifier+][modifier+]...key
 510 # available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
 511 # and 'mod4' (windows-key)
 512 # xev might be helpful to find names for keys
 513 # close notification
 514 close = ctrl+space
 515 # close all notifications
 516 close_all = ctrl+shift+space
 517 # redisplay last message(s)
 518 # On the US keyboard layout 'grave' is normally above TAB and left of '1'.
 519 history = ctrl+shift+h
 520 # context menu
 521 context = ctrl+shift+period
 522 [urgency_low]
 523 # IMPORTANT: colors have to be defined in quotation marks.
 524 # Otherwise the '#' and following  would be interpreted as a comment.
 525 background = "#1d2a30"
 526 foreground = "#71c2af"
 527 timeout = 3
 528 [urgency_normal]
 529 background = "#1d2a30"
 530 foreground = "#71c2af"
 531 timeout = 0
 532 [urgency_critical]
 533 background = "#1d2a30"
 534 foreground = "#ff9982"
 535 timeout = 0
 536
 537 # Every section that isn't one of the above is interpreted as a rules
 538 # to override settings for certain messages.
 539 # Messages can be matched by 'appname', 'summary', 'body' or 'icon'
 540 # and you can override the 'timeout', 'urgency', 'foreground', 'background'
 541 # and 'format'.
 542 # Shell-like globbing will get expanded.
 543 #
 544 # SCRIPTING
 545 # you can specify a script that gets run when the rule matches by setting
 546 # the 'script' option.
 547 # The script will be called as follows:
 548 # script appname summary body icon urgency
 549 # where urgency can be "LOW", "NORMAL" or "CRITICAL".
 550 #
 551 # NOTE: if you don't want a notification to be displayed, set the format to ""
 552 # NOTE: It might be helpful to run dunst -print in a terminal in order to find
 553 # fitting options for rules.
 554 #[espeak]
 555 #    summary = "*"
 556 #    script = dunst_espeak.sh
 557 #[script-test]
 558 #    summary = "*script*"
 559 #    script = dunst_test.sh
 560 #[ignore]
 561 ## This notification will not be displayed
 562 #    summary = "foobar"
 563 #    format = ""
 564 #[signed_on]
 565 #    appname = Pidgin
 566 #    summary = "*signed on*"
 567 #    urgency = low
 568 #
 569 #[signed_off]
 570 #    appname = Pidgin
 571 #    summary = *signed off*
 572 #    urgency = low
 573 #
 574 #[says]
 575 #    appname = Pidgin
 576 #    summary = *says*
 577 #    urgency = critical
 578 #
 579 #[twitter]
 580 #    appname = Pidgin
 581 #    summary = *twitter.com*
 582 #    urgency = normal
 583 #
 584 [xfpm-backlight]
 585     summary = *Brightness*
 586     urgency = low
 587 #+end_src
 588
 589 ** Fontconfig
 590 :PROPERTIES:
 591 :header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
 592 :END:
 593
 594 #+begin_src xml
 595 <?xml version="1.0"?>
 596 <!DOCTYPE fontconfig SYSTEM "fonts.dtd">
 597 <fontconfig>
 598  <match target="font">
 599   <edit mode="assign" name="rgba">
 600    <const>rgb</const>
 601   </edit>
 602  </match>
 603  <match target="font">
 604   <edit mode="assign" name="hinting">
 605    <bool>true</bool>
 606   </edit>
 607  </match>
 608  <match target="font">
 609   <edit mode="assign" name="hintstyle">
 610    <const>hintslight</const>
 611   </edit>
 612  </match>
 613  <match target="font">
 614   <edit mode="assign" name="antialias">
 615    <bool>true</bool>
 616   </edit>
 617  </match>
 618  <match target="font">
 619   <edit mode="assign" name="lcdfilter">
 620    <const>lcddefault</const>
 621   </edit>
 622  </match>
 623  <dir>~/.fonts</dir>
 624
 625  <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
 626  <alias binding="same">
 627   <family>Helvetica</family>
 628   <accept>
 629    <family>Liberation Sans</family>
 630   </accept>
 631 </alias>
 632 </fontconfig>
 633 #+end_src
 634
 635 ** getmail
 636
 637 *** getmailrc
 638 :PROPERTIES:
 639 :header-args+: :tangle ~/.getmail/getmailrc
 640 :END:
 641
 642 #+begin_src conf
 643 [retriever]
 644 type = SimplePOP3SSLRetriever
 645 server = fencepost.gnu.org
 646 username = aminb
 647 password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
 648 port = 995
 649 use_apop = True
 650
 651 [destination]
 652 type = Maildir
 653 path = ~/mail/gnu/Inbox/
 654
 655 [options]
 656 delete = True
 657 #+end_src
 658
 659 *** getmail.service
 660 :PROPERTIES:
 661 :header-args+: :tangle ~/.config/systemd/user/getmail.service
 662 :END:
 663
 664 #+begin_src conf :tangle no
 665 [Unit]
 666 Description=getmail service
 667
 668 [Service]
 669 Type=oneshot
 670 ExecStart=/usr/bin/getmail
 671 StandardOutput=syslog
 672 StandardError=syslog
 673 #+end_src
 674
 675 *** getmail.timer
 676 :PROPERTIES:
 677 :header-args+: :tangle ~/.config/systemd/user/getmail.timer
 678 :END:
 679
 680 #+begin_src conf :tangle no
 681 [Unit]
 682 Description=getmail timer
 683
 684 [Timer]
 685 OnCalendar=*:0/30
 686 Persistent=true
 687 Unit=getmail.service
 688
 689 [Install]
 690 WantedBy=timers.target
 691 #+end_src
 692
 693 ** Git
 694
 695 *** gitconfig
 696 :PROPERTIES:
 697 :header-args+: :tangle ~/.gitconfig
 698 :END:
 699
 700 **** user
 701 #+begin_src conf
 702 [user]
 703     name = Amin Bandali
 704     email = amin@gnu.org
 705     signingkey = CDDE75F903538E71813CDA27D1FBA36627D65876
 706 #+end_src
 707
 708 **** signing
 709 #+begin_src conf
 710 [commit]
 711     gpgsign = true
 712 # [format]
 713 #     signoff = true
 714 #+end_src
 715
 716 **** core
 717 #+begin_src conf
 718 [core]
 719     autocrlf = input  # CRLF -> LF on commit
 720     editor = emacsclient -t
 721     excludesfile = ~/.gitignore_global
 722     pager = "less"
 723 #+end_src
 724
 725 **** gpg
 726 #+begin_src conf
 727 [gpg]
 728     program = gpg2
 729 #+end_src
 730
 731 **** alias
 732 #+begin_src conf
 733 [alias]
 734     git = !exec git  # handle nested git calls, e.g. git git status
 735     aliases = config --get-regexp '^alias\\.'
 736     a = add
 737     s = status
 738     sl = status --long
 739     c = checkout
 740     cb = checkout -b
 741     b = branch
 742     r = rebase
 743     p = pull
 744     pr = pull --rebase
 745     ps = push
 746     psf = push --force
 747     nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f"
 748     nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f"
 749 #+end_src
 750
 751 **** color
 752 #+begin_src conf
 753 [color]
 754     ui = auto
 755 [color "status"]
 756     added = green bold
 757     changed = red bold
 758     untracked = red bold
 759 [color "branch"]
 760     current = green bold
 761     remote = magenta bold
 762 [color "diff"]
 763     new = green bold
 764     old = red bold
 765 #+end_src
 766
 767 **** status
 768 #+begin_src conf
 769 [status]
 770     # showUntrackedFiles = all
 771     short=true
 772     branch=true
 773 #+end_src
 774
 775 **** github
 776 #+begin_src conf
 777 [github]
 778         user = aminb
 779 #+end_src
 780
 781 **** send-email
 782 #+begin_src conf
 783 [sendemail]
 784         smtpuser = aminb
 785         smtpserver = fencepost.gnu.org
 786         smtpserverport = 587
 787         smtpencryption = tls
 788         annotate = yes
 789 #+end_src
 790
 791 *** gitignore
 792 :PROPERTIES:
 793 :header-args+: :tangle ~/.gitignore_global
 794 :END:
 795
 796 #+begin_src conf
 797 *.orig
 798 *.py[co]
 799 *.sublime-workspace
 800 *~
 801 .DS_Store
 802 *.elc
 803 *-autoloads.el
 804 #+end_src
 805
 806 ** GnuPG
 807 :PROPERTIES:
 808 :header-args+: :tangle ~/.gnupg/gpg-agent.conf
 809 :END:
 810
 811 #+begin_src conf
 812 default-cache-ttl 43200
 813 max-cache-ttl 43200
 814
 815 default-cache-ttl-ssh 10800
 816 max-cache-ttl-ssh 10800
 817
 818 # pinentry-program /usr/bin/pinentry-qt
 819 #+end_src
 820
 821 ** GTK
 822
 823 *** gtk-2.0
 824 :PROPERTIES:
 825 :header-args+: :tangle ~/.gtkrc-2.0
 826 :END:
 827
 828 #+begin_src conf
 829 gtk-theme-name="Greybird"
 830 gtk-icon-theme-name="Paper"
 831 gtk-font-name="Ubuntu 10"
 832 gtk-menu-images=0
 833 # gtk-key-theme-name = "Emacs"
 834 #+end_src
 835
 836 *** gtk-3.0
 837 :PROPERTIES:
 838 :header-args+: :tangle ~/.config/gtk-3.0/settings.ini
 839 :END:
 840
 841 #+begin_src conf :tangle no
 842 [Settings]
 843 gtk-icon-theme-name = Paper
 844 # gtk-theme-name = Adwaita
 845
 846 gtk-theme-name = Greybird
 847 # gtk-theme-name = Arc-Darker
 848 # gtk-theme-name = Numix-ArchBlue
 849
 850 gtk-font-name = Ubuntu 10
 851 # gtk-key-theme-name = Emacs
 852 #+end_src
 853
 854 ** [[https://github.com/Leinnan/i3gs][i3gs]]
 855 :PROPERTIES:
 856 :header-args+: :tangle ~/.config/i3gs/config
 857 :END:
 858
 859 #+begin_src conf :comments none :tangle no
 860 borders_width=0 0 2 0
 861 separator_width=10
 862
 863 #[mpd]
 864 #preset=MPD
 865 #title=<span weight='heavy' fgcolor='#7FDBFF'> </span>
 866 #borders_color=#7FDBFF
 867
 868 [ram]
 869 preset=RAM
 870 title=<span weight='heavy' fgcolor='#3D9970'> </span>
 871 borders_color=#3D9970
 872
 873 #[cpu]
 874 #preset=CPU
 875 #title=<span weight='heavy' fgcolor='#2ECC40'> </span>
 876 #borders_color=#2ECC40
 877
 878 #[hdd]
 879 #preset=HDD
 880 #title=<span weight='heavy' fgcolor='#01FF70'> </span>
 881 #borders_color=#01FF70
 882
 883 [volume]
 884 command=volume-info
 885 title=<span weight='heavy' fgcolor='#7FDBFF'></span>
 886 borders_color=#7FDBFF
 887
 888 [battery]
 889 preset=BAT
 890 command=battery-percentage-time
 891 title=<span weight='heavy' fgcolor='#39CCCC'> </span>
 892 borders_color=#39CCCC
 893
 894 [wifi]
 895 preset=WIFI
 896 title=<span weight='heavy' fgcolor='#01FF70'> </span>
 897 borders_color=#01FF70
 898
 899 [date]
 900 preset=DATE
 901 command=date '+%-I:%M, %a %b %d '
 902 title=<span weight='heavy' fgcolor='#FFDC00'> </span>
 903 borders_color=#FFDC00
 904 separator_width=0
 905 #+end_src
 906
 907 ** i3status
 908 :PROPERTIES:
 909 :header-args+: :tangle ~/.config/i3status/config
 910 :END:
 911
 912 #+begin_src conf :comments none
 913 # i3status configuration file.
 914 # see "man i3status" for documentation.
 915
 916 # It is important that this file is edited as UTF-8.
 917 # The following line should contain a sharp s:
 918 # ß
 919 # If the above line is not correctly displayed, fix your editor first!
 920
 921 general {
 922         colors = true
 923         interval = 5
 924 }
 925
 926 # order += "ipv6"
 927 order += "disk /"
 928 order += "disk /data"
 929 order += "wireless _first_"
 930 # order += "ethernet _first_"
 931 order += "battery 0"
 932 order += "volume master"
 933 order += "load"
 934 order += "tztime local"
 935
 936 wireless _first_ {
 937         format_up = "W:%quality %essid %ip"
 938         format_down = "W: down"
 939 }
 940
 941 # ethernet _first_ {
 942 #         # if you use %speed, i3status requires root privileges
 943 #         format_up = "E: %ip (%speed)"
 944 #         format_down = "E: down"
 945 # }
 946
 947 battery 0 {
 948         format = "%status %percentage %remaining (%consumption)"
 949         path = "/sys/class/power_supply/BAT%d/uevent"
 950         low_threshold = "10"
 951         threshold_type = "percentage"
 952         last_full_capacity = true
 953         integer_battery_capacity = true
 954         hide_seconds = true
 955 }
 956
 957 tztime local {
 958         format = "%-I:%M%P %a %b %d"
 959 }
 960
 961 volume master {
 962         format = "♪ %volume"
 963         format_muted = "🔇 %volume"
 964         device = "pulse"
 965 }
 966
 967 load {
 968         format = "%1min"
 969 }
 970
 971 disk "/" {
 972         format = "/ %avail"
 973 }
 974
 975 disk "/data" {
 976         format = "/data %avail"
 977 }
 978 #+end_src
 979
 980 ** isync
 981
 982 *** mbsyncrc
 983 :PROPERTIES:
 984 :header-args+: :tangle ~/.mbsyncrc
 985 :END:
 986
 987 #+begin_src conf
 988 # Global defaults
 989 CopyArrivalDate yes
 990
 991 ######
 992 IMAPAccount amin
 993 Host nix.aminb.org
 994 User amin@aminb.org
 995 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
 996 SSLType IMAPS
 997
 998 IMAPStore amin-remote
 999 Account amin
1000
1001 MaildirStore amin-local
1002 Path ~/mail/amin/
1003 Inbox ~/mail/amin/Inbox
1004 SubFolders Verbatim
1005
1006 Channel amin
1007 Master :amin-remote:
1008 Slave :amin-local:
1009 Patterns * !dovecot*
1010 Create Both
1011 SyncState *
1012
1013 ######
1014 IMAPAccount uwaterloo
1015 Host connect.uwaterloo.ca
1016 User abandali
1017 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
1018 SSLType IMAPS
1019
1020 IMAPStore uwaterloo-remote
1021 Account uwaterloo
1022
1023 MaildirStore uwaterloo-local
1024 Path ~/mail/uwaterloo/
1025 Inbox ~/mail/uwaterloo/Inbox
1026 SubFolders Verbatim
1027
1028 Channel uwaterloo
1029 Master :uwaterloo-remote:
1030 Slave :uwaterloo-local:
1031 Patterns * !dovecot*
1032 Create Both
1033 SyncState *
1034 #+end_src
1035
1036 *** mbsync.service
1037 :PROPERTIES:
1038 :header-args+: :tangle ~/.config/systemd/user/mbsync.service
1039 :END:
1040
1041 #+begin_src conf :tangle no
1042 [Unit]
1043 Description=mbsync service
1044
1045 [Service]
1046 Type=oneshot
1047 ExecStart=/usr/bin/mbsync -Va
1048 StandardOutput=syslog
1049 StandardError=syslog
1050 #+end_src
1051
1052 *** mbsync.timer
1053 :PROPERTIES:
1054 :header-args+: :tangle ~/.config/systemd/user/mbsync.timer
1055 :END:
1056
1057 #+begin_src conf :tangle no
1058 [Unit]
1059 Description=mbsync timer
1060
1061 [Timer]
1062 OnCalendar=*:0/15
1063 Persistent=true
1064 Unit=mbsync.service
1065
1066 [Install]
1067 WantedBy=timers.target
1068 #+end_src
1069
1070 ** Latexmk
1071 :PROPERTIES:
1072 :header-args+: :tangle ~/.latexmkrc
1073 :END:
1074
1075 #+begin_src conf
1076 $pdf_previewer = "start zathura %O %S";
1077 $clean_ext = "aux out";
1078
1079 # $pdf_update_method = 4;
1080 # $pdf_update_command = "zathura %O %S";
1081
1082 # Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
1083 # by Ctrl+click in the PDF.
1084 # Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
1085 # editor.
1086 # $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
1087 #+end_src
1088
1089 ** libinput
1090
1091 Improve XPS 15 9560's touchpad experience.
1092
1093 # begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
1094 #+begin_src conf :tangle no
1095 Section "InputClass"
1096     Identifier "libinput touchpad catchall"
1097     Driver "libinput"
1098     MatchIsTouchpad "on"
1099     Option "ClickMethod" "clickfinger"
1100     Option "NaturalScrolling" "true"
1101     Option "Tapping" "on"
1102     Option "TappingButtonMap" "lrm"
1103 EndSection
1104 #+end_src
1105
1106 ** mpd
1107 :PROPERTIES:
1108 :header-args+: :tangle ~/.config/mpd/mpd.conf
1109 :END:
1110
1111 #+begin_src conf
1112 # An example configuration file for MPD.
1113 # Read the user manual for documentation: http://www.musicpd.org/doc/user/
1114
1115
1116 # Files and directories #######################################################
1117 #
1118 # This setting controls the top directory which MPD will search to discover the
1119 # available audio files and add them to the daemon's online database. This
1120 # setting defaults to the XDG directory, otherwise the music directory will be
1121 # be disabled and audio files will only be accepted over ipc socket (using
1122 # file:// protocol) or streaming files over an accepted protocol.
1123 #
1124 music_directory         "~/usr/music"
1125 #
1126 # This setting sets the MPD internal playlist directory. The purpose of this
1127 # directory is storage for playlists created by MPD. The server will use
1128 # playlist files not created by the server but only if they are in the MPD
1129 # format. This setting defaults to playlist saving being disabled.
1130 #
1131 playlist_directory              "~/.mpd/playlists"
1132 #
1133 # This setting sets the location of the MPD database. This file is used to
1134 # load the database at server start up and store the database while the
1135 # server is not up. This setting defaults to disabled which will allow
1136 # MPD to accept files over ipc socket (using file:// protocol) or streaming
1137 # files over an accepted protocol.
1138 #
1139 db_file                 "~/.mpd/database"
1140 #
1141 # These settings are the locations for the daemon log files for the daemon.
1142 # These logs are great for troubleshooting, depending on your log_level
1143 # settings.
1144 #
1145 # The special value "syslog" makes MPD use the local syslog daemon. This
1146 # setting defaults to logging to syslog, otherwise logging is disabled.
1147 #
1148 log_file                        "~/.mpd/log"
1149 #
1150 # This setting sets the location of the file which stores the process ID
1151 # for use of mpd --kill and some init scripts. This setting is disabled by
1152 # default and the pid file will not be stored.
1153 #
1154 pid_file                        "~/.mpd/pid"
1155 #
1156 # This setting sets the location of the file which contains information about
1157 # most variables to get MPD back into the same general shape it was in before
1158 # it was brought down. This setting is disabled by default and the server
1159 # state will be reset on server start up.
1160 #
1161 state_file                      "~/.mpd/state"
1162 #
1163 # The location of the sticker database.  This is a database which
1164 # manages dynamic information attached to songs.
1165 #
1166 sticker_file                    "~/.mpd/sticker.sql"
1167 #
1168 ###############################################################################
1169
1170
1171 # General music daemon options ################################################
1172 #
1173 # This setting specifies the user that MPD will run as. MPD should never run as
1174 # root and you may use this setting to make MPD change its user ID after
1175 # initialization. This setting is disabled by default and MPD is run as the
1176 # current user.
1177 #
1178 #user                           "nobody"
1179 #
1180 # This setting specifies the group that MPD will run as. If not specified
1181 # primary group of user specified with "user" setting will be used (if set).
1182 # This is useful if MPD needs to be a member of group such as "audio" to
1183 # have permission to use sound card.
1184 #
1185 #group                          "nogroup"
1186 #
1187 # This setting sets the address for the daemon to listen on. Careful attention
1188 # should be paid if this is assigned to anything other then the default, any.
1189 # This setting can deny access to control of the daemon. Not effective if
1190 # systemd socket activiation is in use.
1191 #
1192 # For network
1193 #bind_to_address                "any"
1194 #
1195 # And for Unix Socket
1196 #bind_to_address                "~/.mpd/socket"
1197 #
1198 # This setting is the TCP port that is desired for the daemon to get assigned
1199 # to.
1200 #
1201 #port                           "6600"
1202 #
1203 # This setting controls the type of information which is logged. Available
1204 # setting arguments are "default", "secure" or "verbose". The "verbose" setting
1205 # argument is recommended for troubleshooting, though can quickly stretch
1206 # available resources on limited hardware storage.
1207 #
1208 #log_level                      "default"
1209 #
1210 # If you have a problem with your MP3s ending abruptly it is recommended that
1211 # you set this argument to "no" to attempt to fix the problem. If this solves
1212 # the problem, it is highly recommended to fix the MP3 files with vbrfix
1213 # (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
1214 # point gapless MP3 playback can be enabled.
1215 #
1216 #gapless_mp3_playback                   "yes"
1217 #
1218 # Setting "restore_paused" to "yes" puts MPD into pause mode instead
1219 # of starting playback after startup.
1220 #
1221 #restore_paused "no"
1222 #
1223 # This setting enables MPD to create playlists in a format usable by other
1224 # music players.
1225 #
1226 #save_absolute_paths_in_playlists       "no"
1227 #
1228 # This setting defines a list of tag types that will be extracted during the
1229 # audio file discovery process. The complete list of possible values can be
1230 # found in the user manual.
1231 #metadata_to_use        "artist,album,title,track,name,genre,date,composer,performer,disc"
1232 #
1233 # This setting enables automatic update of MPD's database when files in
1234 # music_directory are changed.
1235 #
1236 #auto_update    "yes"
1237 #
1238 # Limit the depth of the directories being watched, 0 means only watch
1239 # the music directory itself.  There is no limit by default.
1240 #
1241 #auto_update_depth "3"
1242 #
1243 ###############################################################################
1244
1245
1246 # Symbolic link behavior ######################################################
1247 #
1248 # If this setting is set to "yes", MPD will discover audio files by following
1249 # symbolic links outside of the configured music_directory.
1250 #
1251 #follow_outside_symlinks        "yes"
1252 #
1253 # If this setting is set to "yes", MPD will discover audio files by following
1254 # symbolic links inside of the configured music_directory.
1255 #
1256 #follow_inside_symlinks         "yes"
1257 #
1258 ###############################################################################
1259
1260
1261 # Zeroconf / Avahi Service Discovery ##########################################
1262 #
1263 # If this setting is set to "yes", service information will be published with
1264 # Zeroconf / Avahi.
1265 #
1266 #zeroconf_enabled               "yes"
1267 #
1268 # The argument to this setting will be the Zeroconf / Avahi unique name for
1269 # this MPD server on the network.
1270 #
1271 #zeroconf_name                  "Music Player"
1272 #
1273 ###############################################################################
1274
1275
1276 # Permissions #################################################################
1277 #
1278 # If this setting is set, MPD will require password authorization. The password
1279 # setting can be specified multiple times for different password profiles.
1280 #
1281 #password                        "password@read,add,control,admin"
1282 #
1283 # This setting specifies the permissions a user has who has not yet logged in.
1284 #
1285 #default_permissions             "read,add,control,admin"
1286 #
1287 ###############################################################################
1288
1289
1290 # Database #######################################################################
1291 #
1292
1293 #database {
1294 #       plugin "proxy"
1295 #       host "other.mpd.host"
1296 #       port "6600"
1297 #}
1298
1299 # Input #######################################################################
1300 #
1301
1302 input {
1303         plugin "curl"
1304 #       proxy "proxy.isp.com:8080"
1305 #       proxy_user "user"
1306 #       proxy_password "password"
1307 }
1308
1309 #
1310 ###############################################################################
1311
1312 # Audio Output ################################################################
1313 #
1314
1315 audio_output {
1316     type    "pulse"
1317     name    "pulse audio"
1318 }
1319
1320 audio_output {
1321     type    "fifo"
1322     name    "my_fifo"
1323     path    "/tmp/mpd.fifo"
1324     format  "44100:16:2"
1325 }
1326
1327 # MPD supports various audio output types, as well as playing through multiple
1328 # audio outputs at the same time, through multiple audio_output settings
1329 # blocks. Setting this block is optional, though the server will only attempt
1330 # autodetection for one sound card.
1331 #
1332 # An example of an ALSA output:
1333 #
1334 #audio_output {
1335 #       type            "alsa"
1336 #       name            "My ALSA Device"
1337 ##      device          "hw:0,0"        # optional
1338 ##      mixer_type      "hardware"      # optional
1339 ##      mixer_device    "default"       # optional
1340 ##      mixer_control   "PCM"           # optional
1341 ##      mixer_index     "0"             # optional
1342 #}
1343 #
1344 # An example of an OSS output:
1345 #
1346 #audio_output {
1347 #       type            "oss"
1348 #       name            "My OSS Device"
1349 ##      device          "/dev/dsp"      # optional
1350 ##      mixer_type      "hardware"      # optional
1351 ##      mixer_device    "/dev/mixer"    # optional
1352 ##      mixer_control   "PCM"           # optional
1353 #}
1354 #
1355 # An example of a shout output (for streaming to Icecast):
1356 #
1357 #audio_output {
1358 #       type            "shout"
1359 #       encoder         "vorbis"                # optional
1360 #       name            "My Shout Stream"
1361 #       host            "localhost"
1362 #       port            "8000"
1363 #       mount           "/mpd.ogg"
1364 #       password        "hackme"
1365 #       quality         "5.0"
1366 #       bitrate         "128"
1367 #       format          "44100:16:1"
1368 ##      protocol        "icecast2"              # optional
1369 ##      user            "source"                # optional
1370 ##      description     "My Stream Description" # optional
1371 ##      url             "http://example.com"    # optional
1372 ##      genre           "jazz"                  # optional
1373 ##      public          "no"                    # optional
1374 ##      timeout         "2"                     # optional
1375 ##      mixer_type      "software"              # optional
1376 #}
1377 #
1378 # An example of a recorder output:
1379 #
1380 #audio_output {
1381 #       type            "recorder"
1382 #       name            "My recorder"
1383 #       encoder         "vorbis"                # optional, vorbis or lame
1384 #       path            "/var/lib/mpd/recorder/mpd.ogg"
1385 ##      quality         "5.0"                   # do not define if bitrate is defined
1386 #       bitrate         "128"                   # do not define if quality is defined
1387 #       format          "44100:16:1"
1388 #}
1389 #
1390 # An example of a httpd output (built-in HTTP streaming server):
1391 #
1392 #audio_output {
1393 #       type            "httpd"
1394 #       name            "My HTTP Stream"
1395 #       encoder         "vorbis"                # optional, vorbis or lame
1396 #       port            "8000"
1397 #       bind_to_address "0.0.0.0"               # optional, IPv4 or IPv6
1398 ##      quality         "5.0"                   # do not define if bitrate is defined
1399 #       bitrate         "128"                   # do not define if quality is defined
1400 #       format          "44100:16:1"
1401 #       max_clients     "0"                     # optional 0=no limit
1402 #}
1403 #
1404 # An example of a pulseaudio output (streaming to a remote pulseaudio server)
1405 #
1406 #audio_output {
1407 #       type            "pulse"
1408 #       name            "My Pulse Output"
1409 ##      server          "remote_server"         # optional
1410 ##      sink            "remote_server_sink"    # optional
1411 #}
1412 #
1413 # An example of a winmm output (Windows multimedia API).
1414 #
1415 #audio_output {
1416 #       type            "winmm"
1417 #       name            "My WinMM output"
1418 ##      device          "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1419 #               or
1420 ##      device          "0"             # optional
1421 ##      mixer_type      "hardware"      # optional
1422 #}
1423 #
1424 # An example of an openal output.
1425 #
1426 #audio_output {
1427 #       type            "openal"
1428 #       name            "My OpenAL output"
1429 ##      device          "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1430 #}
1431 #
1432 # An example of an sndio output.
1433 #
1434 #audio_output {
1435 #       type            "sndio"
1436 #       name            "sndio output"
1437 #       mixer_type      "software"
1438 #}
1439 #
1440 # An example of an OS X output:
1441 #
1442 #audio_output {
1443 #       type            "osx"
1444 #       name            "My OS X Device"
1445 ##      device          "Built-in Output"       # optional
1446 ##      channel_map      "-1,-1,0,1"    # optional
1447 #}
1448 #
1449 ## Example "pipe" output:
1450 #
1451 #audio_output {
1452 #       type            "pipe"
1453 #       name            "my pipe"
1454 #       command         "aplay -f cd 2>/dev/null"
1455 ## Or if you're want to use AudioCompress
1456 #       command         "AudioCompress -m | aplay -f cd 2>/dev/null"
1457 ## Or to send raw PCM stream through PCM:
1458 #       command         "nc example.org 8765"
1459 #       format          "44100:16:2"
1460 #}
1461 #
1462 ## An example of a null output (for no audio output):
1463 #
1464 #audio_output {
1465 #       type            "null"
1466 #       name            "My Null Output"
1467 #       mixer_type      "none"                  # optional
1468 #}
1469 #
1470 ###############################################################################
1471
1472
1473 # Normalization automatic volume adjustments ##################################
1474 #
1475 # This setting specifies the type of ReplayGain to use. This setting can have
1476 # the argument "off", "album", "track" or "auto". "auto" is a special mode that
1477 # chooses between "track" and "album" depending on the current state of
1478 # random playback. If random playback is enabled then "track" mode is used.
1479 # See <http://www.replaygain.org> for more details about ReplayGain.
1480 # This setting is off by default.
1481 #
1482 #replaygain                     "album"
1483 #
1484 # This setting sets the pre-amp used for files that have ReplayGain tags. By
1485 # default this setting is disabled.
1486 #
1487 #replaygain_preamp              "0"
1488 #
1489 # This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1490 # By default this setting is disabled.
1491 #
1492 #replaygain_missing_preamp      "0"
1493 #
1494 # This setting enables or disables ReplayGain limiting.
1495 # MPD calculates actual amplification based on the ReplayGain tags
1496 # and replaygain_preamp / replaygain_missing_preamp setting.
1497 # If replaygain_limit is enabled MPD will never amplify audio signal
1498 # above its original level. If replaygain_limit is disabled such amplification
1499 # might occur. By default this setting is enabled.
1500 #
1501 #replaygain_limit               "yes"
1502 #
1503 # This setting enables on-the-fly normalization volume adjustment. This will
1504 # result in the volume of all playing audio to be adjusted so the output has
1505 # equal "loudness". This setting is disabled by default.
1506 #
1507 #volume_normalization           "no"
1508 #
1509 ###############################################################################
1510
1511 # Character Encoding ##########################################################
1512 #
1513 # If file or directory names do not display correctly for your locale then you
1514 # may need to modify this setting.
1515 #
1516 #filesystem_charset             "UTF-8"
1517 #
1518 ###############################################################################
1519 #+end_src
1520
1521 ** msmtp
1522 :PROPERTIES:
1523 :header-args+: :tangle ~/.msmtprc
1524 :END:
1525
1526 #+begin_src conf
1527 # Set default values for all following accounts.
1528 defaults
1529 port 587
1530 tls on
1531 auth on
1532 #tls_trust_file /etc/ssl/certs/ca-certificates.crt
1533 logfile ~/.msmtp.log
1534
1535 # aminb
1536 account aminb
1537 host nix.aminb.org
1538 # use `msmtp -a aminb --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1539 tls_fingerprint 98:C7:F0:02:7F:2B:D8:B6:D3:BF:E8:C1:D4:07:6B:B5:6C:B1:C7:5D:97:20:70:88:AB:9E:B5:09:5D:2C:DC:8E
1540 tls_starttls on
1541 from amin@aminb.org
1542 user amin@aminb.org
1543 passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
1544
1545 # gnu
1546 account gnu
1547 host fencepost.gnu.org
1548 # use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1549 tls_fingerprint 28:70:42:76:1C:EC:91:5F:D1:B3:27:A1:CD:3B:32:A4:8B:0B:DC:3A:CD:CA:F6:6F:E4:61:BA:69:D7:4D:0D:0B
1550 tls_starttls on
1551 from aminb@gnu.org
1552 user aminb
1553 passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
1554
1555 # gnu (amin)
1556 account gnu-amin : gnu
1557 from amin@gnu.org
1558
1559 # gnu (mab)
1560 account gnu-mab : gnu
1561 from mab@gnu.org
1562
1563 # uwaterloo
1564 account uwaterloo
1565 host connect.uwaterloo.ca
1566 tls_starttls on
1567 from abandali@uwaterloo.ca
1568 user abandali
1569 passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
1570 tls_trust_file /etc/ssl/certs/ca-certificates.crt
1571
1572 # Set a default account
1573 account default : aminb
1574 #+end_src
1575
1576 ** ncmpcpp
1577
1578 *** config
1579 :PROPERTIES:
1580 :header-args+: :tangle ~/.ncmpcpp/config
1581 :END:
1582
1583 #+begin_src conf :tangle no
1584 ##############################################################
1585 ## This is the example configuration file. Copy it to       ##
1586 ## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
1587 ## and set up your preferences.                             ##
1588 ##############################################################
1589 #
1590 ##### directories ######
1591 ##
1592 ## Directory for storing ncmpcpp related files.
1593 ## Changing it is useful if you want to store
1594 ## everything somewhere else and provide command
1595 ## line setting for alternative location to config
1596 ## file which defines that while launching ncmpcpp.
1597 ##
1598 #
1599 ncmpcpp_directory = ~/.ncmpcpp
1600 #
1601 ##
1602 ## Directory for storing downloaded lyrics. It
1603 ## defaults to ~/.lyrics since other MPD clients
1604 ## (eg. ncmpc) also use that location.
1605 ##
1606 #
1607 #lyrics_directory = ~/.lyrics
1608 #
1609 ##### connection settings #####
1610 #
1611 #mpd_host = localhost
1612 #
1613 #mpd_port = 6600
1614 #
1615 #mpd_connection_timeout = 5
1616 #
1617 ## Needed for tag editor and file operations to work.
1618 ##
1619 mpd_music_dir = ~/usr/music
1620 #
1621 #mpd_crossfade_time = 5
1622 #
1623 ##### music visualizer #####
1624 ##
1625 ## Note: In order to make music visualizer work you'll
1626 ## need to use mpd fifo output, whose format parameter
1627 ## has to be set to 44100:16:1 for mono visualization
1628 ## or 44100:16:2 for stereo visualization. Example
1629 ## configuration (it has to be put into mpd.conf):
1630 ##
1631 ## audio_output {
1632 ##        type            "fifo"
1633 ##        name            "Visualizer feed"
1634 ##        path            "/tmp/mpd.fifo"
1635 ##        format          "44100:16:2"
1636 ## }
1637 ##
1638 #
1639 visualizer_fifo_path = /tmp/mpd.fifo
1640 #
1641 ##
1642 ## Note: Below parameter is needed for ncmpcpp
1643 ## to determine which output provides data for
1644 ## visualizer and thus allow syncing between
1645 ## visualization and sound as currently there
1646 ## are some problems with it.
1647 ##
1648 #
1649 visualizer_output_name = my fifo
1650 #
1651 ##
1652 ## If you set format to 44100:16:2, make it 'yes'.
1653 ##
1654 visualizer_in_stereo = yes
1655 #
1656 ##
1657 ## Multiply received samples by given value. Very
1658 ## useful for proper visualization of quiet music.
1659 ##
1660 #visualizer_sample_multiplier = 1
1661 #
1662 ##
1663 ## Note: Below parameter defines how often ncmpcpp
1664 ## has to "synchronize" visualizer and audio outputs.
1665 ## 30 seconds is optimal value, but if you experience
1666 ## synchronization problems, set it to lower value.
1667 ## Keep in mind that sane values start with >=10.
1668 ##
1669 #
1670 visualizer_sync_interval = 30
1671 #
1672 ##
1673 ## Note: To enable spectrum frequency visualization
1674 ## you need to compile ncmpcpp with fftw3 support.
1675 ##
1676 #
1677 ## Available values: spectrum, wave, wave_filled, ellipse.
1678 ##
1679 visualizer_type = spectrum
1680 #
1681 #visualizer_look = ●▮
1682 visualizer_look = "●•"
1683 #
1684 #visualizer_color = blue, cyan, green, yellow, magenta, red
1685 #
1686 ## Alternative subset of 256 colors for terminals that support it.
1687 ##
1688 #visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
1689 #
1690 ##### system encoding #####
1691 ##
1692 ## ncmpcpp should detect your charset encoding
1693 ## but if it failed to do so, you can specify
1694 ## charset encoding you are using here.
1695 ##
1696 ## Note: You can see whether your ncmpcpp build
1697 ## supports charset detection by checking output
1698 ## of `ncmpcpp --version`.
1699 ##
1700 ## Note: Since MPD uses UTF-8 by default, setting
1701 ## this option makes sense only if your encoding
1702 ## is different.
1703 ##
1704 #
1705 #system_encoding = ""
1706 #
1707 ##### delays #####
1708 #
1709 ## Time of inactivity (in seconds) after playlist
1710 ## highlighting will be disabled (0 = always on).
1711 ##
1712 #playlist_disable_highlight_delay = 5
1713 #
1714 ## Defines how long messages are supposed to be visible.
1715 ##
1716 #message_delay_time = 5
1717 #
1718 ##### song format #####
1719 ##
1720 ## For a song format you can use:
1721 ##
1722 ## %l - length
1723 ## %f - filename
1724 ## %D - directory
1725 ## %a - artist
1726 ## %A - album artist
1727 ## %t - title
1728 ## %b - album
1729 ## %y - date
1730 ## %n - track number (01/12 -> 01)
1731 ## %N - full track info (01/12 -> 01/12)
1732 ## %g - genre
1733 ## %c - composer
1734 ## %p - performer
1735 ## %d - disc
1736 ## %C - comment
1737 ## %P - priority
1738 ## $R - begin right alignment
1739 ##
1740 ## If you want to make sure that a part of the format is displayed
1741 ## only when certain tags are present, you can archieve it by
1742 ## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
1743 ## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
1744 ## It is also possible to define a list of alternatives by providing
1745 ## several groups and separating them with '|', e.g. '{%t}|{%f}'
1746 ## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
1747 ## present.
1748 ##
1749 ## Note: If you want to set limit on maximal length of a tag, just
1750 ## put the appropriate number between % and character that defines
1751 ## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
1752 ##
1753 ## In addition, formats support markers used for text attributes.
1754 ## They are followed by character '$'. After that you can put:
1755 ##
1756 ## - 0 - default window color (discards all other colors)
1757 ## - 1 - black
1758 ## - 2 - red
1759 ## - 3 - green
1760 ## - 4 - yellow
1761 ## - 5 - blue
1762 ## - 6 - magenta
1763 ## - 7 - cyan
1764 ## - 8 - white
1765 ## - 9 - end of current color
1766 ## - b - bold text
1767 ## - u - underline text
1768 ## - r - reverse colors
1769 ## - a - use alternative character set
1770 ##
1771 ## If you don't want to use a non-color attribute anymore, just put it
1772 ## again, but this time insert character '/' between '$' and attribute
1773 ## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
1774 ## or filename with reversed colors.
1775 ##
1776 ## If you want to use 256 colors and/or background colors in formats
1777 ## (the naming scheme is described below in section about color
1778 ## definitions), it can be done with the syntax $(COLOR), e.g. to set
1779 ## the artist tag to one of the non-standard colors and make it have
1780 ## yellow background, you need to write $(197_yellow)%a$(end). Note
1781 ## that for standard colors this is interchangable with attributes
1782 ## listed above.
1783 ##
1784 ## Note: colors can be nested.
1785 ##
1786 #
1787 #song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
1788 #
1789 #song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
1790 #
1791 #song_library_format = {%n - }{%t}|{%f}
1792 #
1793 #
1794 #alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
1795 #
1796 #alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
1797 #
1798 #now_playing_prefix = $b
1799 #
1800 #now_playing_suffix = $/b
1801 #
1802 #browser_playlist_prefix = "$2playlist$9 "
1803 #
1804 #selected_item_prefix = $6
1805 #
1806 #selected_item_suffix = $9
1807 #
1808 #modified_item_prefix = $3> $9
1809 #
1810 ##
1811 ## Note: attributes are not supported for the following variables.
1812 ##
1813 #song_window_title_format = {%a - }{%t}|{%f}
1814 ##
1815 ## Note: Below variables are used for sorting songs in browser.
1816 ## The sort mode determines how songs are sorted, and can be used
1817 ## in combination with a sort format to specify a custom sorting format.
1818 ## Available values for browser_sort_mode are "name", "mtime", "format"
1819 ## and "noop".
1820 ##
1821 #
1822 #browser_sort_mode = name
1823 #
1824 #browser_sort_format = {%a - }{%t}|{%f} {(%l)}
1825 #
1826 ##### columns settings #####
1827 ##
1828 ## syntax of song columns list format is "column column etc."
1829 ##
1830 ## - syntax for each column is:
1831 ##
1832 ## (width of the column)[color of the column]{displayed tag}
1833 ##
1834 ## Note: Width is by default in %, if you want a column to
1835 ## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
1836 ## will be the column that take 10% of screen (so the real width
1837 ## will depend on actual screen size), whereas (10f)[white]{a}
1838 ## will take 10 terminal cells, no matter how wide the screen is.
1839 ##
1840 ## - color is optional (if you want the default one,
1841 ##   leave the field empty).
1842 ##
1843 ## Note: You can give a column additional attributes by putting appropriate
1844 ## character after displayed tag character. Available attributes are:
1845 ##
1846 ## - r - column will be right aligned
1847 ## - E - if tag is empty, empty tag marker won't be displayed
1848 ##
1849 ## You can also:
1850 ##
1851 ## - give a column custom name by putting it after attributes,
1852 ##   separated with character ':', e.g. {lr:Length} gives you
1853 ##   right aligned column of lengths named "Length".
1854 ##
1855 ## - define sequence of tags, that have to be displayed in case
1856 ##   predecessor is empty in a way similar to the one in classic
1857 ##   song format, i.e. using '|' character, e.g. {a|c|p:Owner}
1858 ##   creates column named "Owner" that tries to display artist
1859 ##   tag and then composer and performer if previous ones are
1860 ##   not available.
1861 ##
1862 #
1863 #song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
1864 #
1865 ##### various settings #####
1866 #
1867 ##
1868 ## Note: Custom command that will be executed each
1869 ## time song changes. Useful for notifications etc.
1870 ##
1871 #execute_on_song_change = ""
1872 #
1873 #playlist_show_mpd_host = no
1874 #
1875 #playlist_show_remaining_time = no
1876 #
1877 #playlist_shorten_total_times = no
1878 #
1879 #playlist_separate_albums = no
1880 #
1881 ##
1882 ## Note: Possible display modes: classic, columns.
1883 ##
1884 #playlist_display_mode = columns
1885 #
1886 #browser_display_mode = classic
1887 #
1888 #search_engine_display_mode = classic
1889 #
1890 #playlist_editor_display_mode = classic
1891 #
1892 #discard_colors_if_item_is_selected = yes
1893 #
1894 #incremental_seeking = yes
1895 #
1896 #seek_time = 1
1897 #
1898 #volume_change_step = 2
1899 #
1900 #autocenter_mode = no
1901 #
1902 #centered_cursor = no
1903 #
1904 ##
1905 ## Note: You can specify third character which will
1906 ## be used to build 'empty' part of progressbar.
1907 ##
1908 #progressbar_look = =>
1909 progressbar_look = "─╼╶"
1910 #progressbar_look = "─⊙╶"
1911 #
1912 #progressbar_boldness = yes
1913 #
1914 ## Available values: database, playlist.
1915 ##
1916 #default_place_to_search_in = database
1917 #
1918 ## Available values: classic, alternative.
1919 ##
1920 #user_interface = classic
1921 #
1922 #data_fetching_delay = yes
1923 #
1924 ## Available values: artist, album_artist, date, genre, composer, performer.
1925 ##
1926 #media_library_primary_tag = artist
1927 #
1928 ## Available values: wrapped, normal.
1929 ##
1930 #default_find_mode = wrapped
1931 #
1932 #default_tag_editor_pattern = %n - %t
1933 #
1934 #header_visibility = yes
1935 #
1936 #statusbar_visibility = yes
1937 #
1938 #titles_visibility = yes
1939 #
1940 #header_text_scrolling = yes
1941 #
1942 #cyclic_scrolling = no
1943 #
1944 #lines_scrolled = 2
1945 #
1946 #follow_now_playing_lyrics = no
1947 #
1948 #fetch_lyrics_for_current_song_in_background = no
1949 #
1950 #store_lyrics_in_song_dir = no
1951 #
1952 #generate_win32_compatible_filenames = yes
1953 #
1954 #allow_for_physical_item_deletion = no
1955 #
1956 ##
1957 ## Note: If you set this variable, ncmpcpp will try to
1958 ## get info from last.fm in language you set and if it
1959 ## fails, it will fall back to english. Otherwise it will
1960 ## use english the first time.
1961 ##
1962 ## Note: Language has to be expressed as an ISO 639 alpha-2 code.
1963 ##
1964 #lastfm_preferred_language = en
1965 #
1966 #show_hidden_files_in_local_browser = no
1967 #
1968 ##
1969 ## How shall screen switcher work?
1970 ##
1971 ## - "previous" - switch between the current and previous screen.
1972 ## - "screen1,...,screenN" - switch between given sequence of screens.
1973 ##
1974 ## Screens available for use: help, playlist, browser, search_engine,
1975 ## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
1976 ##
1977 #screen_switcher_mode = playlist, browser
1978 #
1979 ##
1980 ## Note: You can define startup screen
1981 ## by choosing screen from the list above.
1982 ##
1983 #startup_screen = playlist
1984 #
1985 ##
1986 ## Note: You can define startup slave screen
1987 ## by choosing screen from the list above or
1988 ## an empty value for no slave screen.
1989 ##
1990 #startup_slave_screen = ""
1991 #
1992 #startup_slave_screen_focus = no
1993 #
1994 ##
1995 ## Default width of locked screen (in %).
1996 ## Acceptable values are from 20 to 80.
1997 ##
1998 #
1999 #locked_screen_width_part = 50
2000 #
2001 #ask_for_locked_screen_width_part = yes
2002 #
2003 #jump_to_now_playing_song_at_start = yes
2004 #
2005 #ask_before_clearing_playlists = yes
2006 #
2007 #clock_display_seconds = no
2008 #
2009 #display_volume_level = yes
2010 #
2011 #display_bitrate = no
2012 #
2013 #display_remaining_time = no
2014 #
2015 ## Available values: none, basic, extended, perl.
2016 ##
2017 #regular_expressions = perl
2018 #
2019 ##
2020 ## Note: If below is enabled, ncmpcpp will ignore leading
2021 ## "The" word while sorting items in browser, tags in
2022 ## media library, etc.
2023 ##
2024 #ignore_leading_the = no
2025 #
2026 #block_search_constraints_change_if_items_found = yes
2027 #
2028 #mouse_support = yes
2029 #
2030 #mouse_list_scroll_whole_page = yes
2031 #
2032 #empty_tag_marker = <empty>
2033 #
2034 #tags_separator = " | "
2035 #
2036 #tag_editor_extended_numeration = no
2037 #
2038 #media_library_sort_by_mtime = no
2039 #
2040 #enable_window_title = yes
2041 #
2042 ##
2043 ## Note: You can choose default search mode for search
2044 ## engine. Available modes are:
2045 ##
2046 ## - 1 - use mpd built-in searching (no regexes, pattern matching)
2047 ## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
2048 ##       but if your mpd is on a remote machine, downloading big database
2049 ##       to process it can take a while
2050 ## - 3 - match only exact values (this mode uses mpd function for searching
2051 ##       in database and local one for searching in current playlist)
2052 ##
2053 #
2054 #search_engine_default_search_mode = 1
2055 #
2056 #external_editor = nano
2057 #
2058 ## Note: set to yes if external editor is a console application.
2059 ##
2060 #use_console_editor = yes
2061 #
2062 ##### colors definitions #####
2063 ##
2064 ## It is possible to set a background color by setting a color
2065 ## value "<foreground>_<background>", e.g. red_black will set
2066 ## foregound color to red and background color to black.
2067 ##
2068 ## In addition, for terminals that support 256 colors it
2069 ## is possible to set one of them by using a number in range
2070 ## [1, 256] instead of color name, e.g. numerical value
2071 ## corresponding to red_black is 2_1. To find out if the
2072 ## terminal supports 256 colors, run ncmpcpp and check out
2073 ## the bottom of the help screen for list of available colors
2074 ## and their numerical values.
2075 ##
2076 ## Note: due to technical limitations of ncurses, if 256 colors
2077 ## are used, it is possible to either use only the colors with
2078 ## default background color, or all pairs from 1_1 up to 254_127,
2079 ## depending on the ncurses version used.
2080 ##
2081 #
2082 #colors_enabled = yes
2083 #
2084 #empty_tag_color = cyan
2085 #
2086 #header_window_color = default
2087 #
2088 #volume_color = default
2089 #
2090 #state_line_color = default
2091 #
2092 #state_flags_color = default
2093 #
2094 #main_window_color = yellow
2095 #
2096 #color1 = white
2097 #
2098 #color2 = green
2099 #
2100 #main_window_highlight_color = yellow
2101 #
2102 #progressbar_color = black
2103 #
2104 #progressbar_elapsed_color = green
2105 #
2106 #statusbar_color = default
2107 #
2108 #alternative_ui_separator_color = black
2109 #
2110 #active_column_color = red
2111 #
2112 #window_border_color = green
2113 #
2114 #active_window_border = red
2115 #
2116 #+end_src
2117
2118 *** bindings
2119 :PROPERTIES:
2120 :header-args+: :tangle ~/.ncmpcpp/bindings
2121 :END:
2122
2123 #+begin_src conf :tangle no
2124 def_key "j"
2125     scroll_down
2126 def_key "k"
2127     scroll_up
2128
2129 def_key "ctrl-u"
2130     page_up
2131 def_key "ctrl-d"
2132     page_down
2133
2134 def_key "h"
2135     previous_column
2136 def_key "l"
2137     next_column
2138
2139 def_key "."
2140     show_lyrics
2141
2142 def_key "n"
2143     next_found_item
2144 def_key "N"
2145     previous_found_item
2146
2147 def_key "J"
2148     move_sort_order_down
2149 def_key "K"
2150     move_sort_order_up
2151 #+end_src
2152
2153 ** notmuch
2154
2155 *** notmuch-config
2156 :PROPERTIES:
2157 :header-args+: :tangle ~/.notmuch-config
2158 :END:
2159
2160 #+begin_src conf
2161 # .notmuch-config - Configuration file for the notmuch mail system
2162 #
2163 # For more information about notmuch, see https://notmuchmail.org
2164
2165 # Database configuration
2166 #
2167 # The only value supported here is 'path' which should be the top-level
2168 # directory where your mail currently exists and to where mail will be
2169 # delivered in the future. Files should be individual email messages.
2170 # Notmuch will store its database within a sub-directory of the path
2171 # configured here named ".notmuch".
2172 #
2173 [database]
2174 path=/home/amin/mail
2175
2176 # User configuration
2177 #
2178 # Here is where you can let notmuch know how you would like to be
2179 # addressed. Valid settings are
2180 #
2181 #       name            Your full name.
2182 #       primary_email   Your primary email address.
2183 #       other_email     A list (separated by ';') of other email addresses
2184 #                       at which you receive email.
2185 #
2186 # Notmuch will use the various email addresses configured here when
2187 # formatting replies. It will avoid including your own addresses in the
2188 # recipient list of replies, and will set the From address based on the
2189 # address to which the original email was addressed.
2190 #
2191 [user]
2192 name=Amin Bandali
2193 primary_email=amin@aminb.org
2194 other_email=amin@gnu.org;abandali@uwaterloo.ca;mab@gnu.org;aminb@gnu.org;
2195
2196 # Configuration for "notmuch new"
2197 #
2198 # The following options are supported here:
2199 #
2200 #       tags    A list (separated by ';') of the tags that will be
2201 #               added to all messages incorporated by "notmuch new".
2202 #
2203 #       ignore  A list (separated by ';') of file and directory names
2204 #               that will not be searched for messages by "notmuch new".
2205 #
2206 #               NOTE: *Every* file/directory that goes by one of those
2207 #               names will be ignored, independent of its depth/location
2208 #               in the mail store.
2209 #
2210 [new]
2211 tags=new;
2212 #tags=unread;inbox;
2213 ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
2214
2215 # Search configuration
2216 #
2217 # The following option is supported here:
2218 #
2219 #       exclude_tags
2220 #               A ;-separated list of tags that will be excluded from
2221 #               search results by default.  Using an excluded tag in a
2222 #               query will override that exclusion.
2223 #
2224 [search]
2225 exclude_tags=deleted;spam;
2226
2227 # Maildir compatibility configuration
2228 #
2229 # The following option is supported here:
2230 #
2231 #       synchronize_flags      Valid values are true and false.
2232 #
2233 #       If true, then the following maildir flags (in message filenames)
2234 #       will be synchronized with the corresponding notmuch tags:
2235 #
2236 #               Flag    Tag
2237 #               ----    -------
2238 #               D       draft
2239 #               F       flagged
2240 #               P       passed
2241 #               R       replied
2242 #               S       unread (added when 'S' flag is not present)
2243 #
2244 #       The "notmuch new" command will notice flag changes in filenames
2245 #       and update tags, while the "notmuch tag" and "notmuch restore"
2246 #       commands will notice tag changes and update flags in filenames
2247 #
2248 [maildir]
2249 synchronize_flags=true
2250
2251 # Cryptography related configuration
2252 #
2253 # The following option is supported here:
2254 #
2255 #       gpg_path
2256 #               binary name or full path to invoke gpg.
2257 #
2258 [crypto]
2259 gpg_path=gpg
2260 #+end_src
2261
2262 *** pre-new hook
2263 :PROPERTIES:
2264 :header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
2265 :END:
2266
2267 #+begin_src sh
2268 touch /tmp/gnusieve.log
2269 sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
2270              -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
2271 #+end_src
2272
2273 *** post-new hook
2274 :PROPERTIES:
2275 :header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
2276 :END:
2277
2278 #+begin_src sh
2279 # apply sent tag to messages sent by me
2280 notmuch tag -new +sent -- from:amin@aminb.org or from:amin@gnu.org or from:mab@gnu.org or from:aminb@gnu.org or from:abandali@uwaterloo.ca
2281
2282 # initial tagging
2283 notmuch tag -latest                     -- tag:latest
2284 notmuch tag +inbox +unread +latest -new -- tag:new
2285
2286
2287 # apply tags to lists
2288
2289 # <aminb>
2290 notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
2291 notmuch tag -inbox +lists/haskell-weekly   -- folder:amin/lists/haskell-weekly
2292
2293 notmuch tag -inbox +pay -- folder:amin/pay
2294 notmuch tag -inbox +banking -- folder:amin/banking
2295 # </aminb>
2296
2297 # <uw>
2298 notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
2299 notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
2300 notmuch tag -inbox +uw/se212 -- folder:uwaterloo/lists/se212
2301
2302 notmuch tag -inbox +lists/clvsingle        -- folder:uwaterloo/lists/Clvsingle
2303 notmuch tag -inbox +lists/gsa              -- folder:uwaterloo/lists/GSA
2304 notmuch tag -inbox +lists/math-grad        -- folder:uwaterloo/lists/Math-grad
2305 notmuch tag -inbox +lists/scs-grads        -- folder:uwaterloo/lists/scs-grads
2306 notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
2307 # </uw>
2308
2309 # <gnu>
2310 notmuch tag -inbox +l/emacs-devel       -- folder:gnu/l/emacs-devel
2311 notmuch tag -inbox +l/emacs-orgmode     -- folder:gnu/l/emacs-orgmode
2312 notmuch tag -inbox +l/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
2313 notmuch tag -inbox +l/fencepost-users   -- folder:gnu/l/fencepost-users
2314 notmuch tag -inbox +l/guix-devel        -- folder:gnu/l/guix-devel
2315 notmuch tag -inbox +l/guile-devel       -- folder:gnu/l/guile-devel
2316 notmuch tag -inbox +l/help-gnu-emacs    -- folder:gnu/l/help-gnu-emacs
2317 notmuch tag -inbox +l/info-gnu-emacs    -- folder:gnu/l/info-gnu-emacs
2318 notmuch tag -inbox +l/www-commits       -- folder:gnu/l/www-commits
2319 notmuch tag -inbox +l/www-discuss       -- folder:gnu/l/www-discuss
2320 notmuch tag -inbox +webmasters          -- folder:gnu/webmasters
2321
2322 notmuch tag -inbox +l/deepspec     -- folder:gnu/l/deepspec
2323 notmuch tag -inbox +l/haskell-cafe -- folder:gnu/l/haskell-cafe
2324 notmuch tag -inbox +l/haskell-art  -- folder:gnu/l/haskell-art
2325 notmuch tag -inbox +l/notmuch      -- folder:gnu/l/notmuch
2326
2327 notmuch tag -inbox +l/~aminb/test-priv         -- folder:gnu/l/~aminb/test-priv
2328 notmuch tag -inbox +l/~sircmpwn/sr.ht-admins   -- folder:gnu/l/~sircmpwn/sr.ht-admins
2329 notmuch tag -inbox +l/~sircmpwn/sr.ht-announce -- folder:gnu/l/~sircmpwn/sr.ht-announce
2330 notmuch tag -inbox +l/~sircmpwn/sr.ht-dev      -- folder:gnu/l/~sircmpwn/sr.ht-dev
2331 notmuch tag -inbox +l/~sircmpwn/sr.ht-discuss  -- folder:gnu/l/~sircmpwn/sr.ht-discuss
2332 # </gnu>
2333
2334 notmuch tag -inbox -unread +archive/notmuch     -- path:archive/notmuch/**
2335 notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**
2336 #+end_src
2337
2338 *** notmuch.service
2339 :PROPERTIES:
2340 :header-args+: :tangle ~/.config/systemd/user/notmuch.service
2341 :END:
2342
2343 #+begin_src conf :tangle no
2344 [Unit]
2345 Description=notmuch service
2346
2347 [Service]
2348 Type=oneshot
2349 ExecStart=/usr/bin/notmuch new
2350 StandardOutput=syslog
2351 StandardError=syslog
2352 #+end_src
2353
2354 *** notmuch.timer
2355 :PROPERTIES:
2356 :header-args+: :tangle ~/.config/systemd/user/notmuch.timer
2357 :END:
2358
2359 #+begin_src conf :tangle no
2360 [Unit]
2361 Description=notmuch timer
2362
2363 [Timer]
2364 OnCalendar=*:0/5
2365 Persistent=true
2366 Unit=notmuch.service
2367
2368 [Install]
2369 WantedBy=timers.target
2370 #+end_src
2371
2372 ** offlineimap
2373
2374 *** offlineimaprc
2375 :PROPERTIES:
2376 :header-args+: :tangle ~/.offlineimaprc
2377 :END:
2378
2379 #+begin_src conf :tangle no
2380 [general]
2381 pythonfile = ~/.offlineimap.py
2382 accounts = Gmail, aminb
2383 maxsyncaccounts = 3
2384
2385 [Account Gmail]
2386 localrepository = GmailL
2387 remoterepository = GmailR
2388
2389 [Account aminb]
2390 localrepository = aminbL
2391 remoterepository = aminbR
2392
2393 [Repository GmailL]
2394 type = Maildir
2395 localfolders = ~/Maildir/Gmail
2396
2397 [Repository GmailR]
2398 type = IMAP
2399 remotehost = imap.gmail.com
2400 remoteusereval = mailuser("gmail")
2401 remotepasseval = mailpasswd("gmail")
2402 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2403 ssl = yes
2404 folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
2405 maxconnections = 1
2406 realdelete = no
2407
2408 [Repository aminbL]
2409 type = Maildir
2410 localfolders = ~/Maildir/aminb
2411
2412 [Repository aminbR]
2413 type = IMAP
2414 remotehost = mail.aminb.org
2415 remoteusereval = mailuser("aminb")
2416 remotepasseval = mailpasswd("aminb")
2417 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2418 ssl = yes
2419 folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
2420 maxconnections = 1
2421 realdelete = no
2422 #+end_src
2423
2424 *** offlineimap.py
2425 :PROPERTIES:
2426 :header-args+: :tangle ~/.offlineimap.py
2427 :END:
2428
2429 #+begin_src python :tangle no
2430 import os
2431 import subprocess
2432
2433 def mailpasswd(acct):
2434     acct = os.path.basename(acct)
2435     path = "/home/amin/.passwd/%s.gpg" % acct
2436     args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
2437     try:
2438         return subprocess.check_output(args).strip()
2439     except subprocess.CalledProcessError:
2440         return ""
2441
2442 def mailuser(acct):
2443     acct = os.path.basename(acct)
2444     path = "/home/amin/.passwd/%s" % acct
2445     args = ["cat", path]
2446     try:
2447         return subprocess.check_output(args).strip()
2448     except subprocess.CalledProcessError:
2449         return ""
2450
2451 def prime_gpg_agent():
2452   ret = False
2453   i = 1
2454   while not ret:
2455     ret = (mailpasswd("prime") == "prime")
2456     if i > 2:
2457       from offlineimap.ui import getglobalui
2458       sys.stderr.write("Error reading in passwords. Terminating.\n")
2459       getglobalui().terminate()
2460     i += 1
2461   return ret
2462
2463 prime_gpg_agent()
2464 #+end_src
2465
2466 ** pigeonhole
2467 *** gnu.sieve
2468 :PROPERTIES:
2469 :header-args+: :tangle ~/sieve/gnu.sieve :comments none
2470 :END:
2471
2472 #+begin_src conf
2473 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags", "include" ];
2474
2475 if anyof (
2476   address :is "from" "webmasters@gnu.org",
2477   address :is "from" "webmasters-comment@gnu.org") {
2478   fileinto :create "webmasters";
2479   stop;
2480 }
2481
2482 include :personal "lists";
2483 #+end_src
2484
2485 *** lists.sieve
2486 :PROPERTIES:
2487 :header-args+: :tangle ~/sieve/lists.sieve :comments none
2488 :END:
2489
2490 #+begin_src conf
2491 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags",
2492  "include" ];
2493
2494 if anyof (
2495     header :contains "list-id" "<emacs-devel.gnu.org>",
2496     header :contains "list-id" "<emacs-orgmode.gnu.org>",
2497     header :contains "list-id" "<emacsconf-discuss.gnu.org>",
2498     header :contains "list-id" "<fencepost-users.gnu.org>",
2499     header :contains "list-id" "<guix-devel.gnu.org>",
2500     header :contains "list-id" "<guile-devel.gnu.org>",
2501     header :contains "list-id" "<help-gnu-emacs.gnu.org>",
2502     header :contains "list-id" "<info-gnu-emacs.gnu.org>",
2503     header :contains "list-id" "<www-commits.gnu.org>",
2504     header :contains "list-id" "<www-discuss.gnu.org>",
2505     header :contains "list-id" "<deepspec.lists.cs.princeton.edu>",
2506     header :contains "list-id" "<haskell-cafe.haskell.org>",
2507     header :contains "list-id" "<haskell-art.we.lurk.org>",
2508     header :contains "list-id" "<notmuch.notmuchmail.org>") {
2509     if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
2510         set :lower "listname" "${1}";
2511         fileinto :create "l/${listname}";
2512     }
2513 }
2514
2515 if anyof (
2516     header :contains "list-id" "<~aminb/test-priv@lists.sr.ht>",
2517     header :contains "list-id" "<~sircmpwn/sr.ht-admins@lists.sr.ht>",
2518     header :contains "list-id" "<~sircmpwn/sr.ht-announce@lists.sr.ht>",
2519     header :contains "list-id" "<~sircmpwn/sr.ht-dev@lists.sr.ht>",
2520     header :contains "list-id" "<~sircmpwn/sr.ht-discuss@lists.sr.ht>") {
2521     if header :regex "list-id" "(~[a-z_0-9-]+)/([a-z_0-9.-]+)@" {
2522         set :lower "username" "${1}";
2523         set :lower "listname" "${2}";
2524         fileinto :create "l/${username}/${listname}";
2525     }
2526 }
2527 #+end_src
2528
2529 ** polybar
2530
2531 *** config
2532 :PROPERTIES:
2533 :header-args+: :tangle ~/.config/polybar/config
2534 :END:
2535
2536 #+begin_src conf :tangle no
2537 ;=====================================================
2538 ;
2539 ;   To learn more about how to configure Polybar
2540 ;   go to https://github.com/jaagr/polybar
2541 ;
2542 ;   The README contains alot of information
2543 ;
2544 ;=====================================================
2545
2546 [colors]
2547 ;background = ${xrdb:color0:#222}
2548 background = #222
2549 background-alt = #444
2550 ;foreground = ${xrdb:color7:#222}
2551 foreground = #eee
2552 foreground-alt = #888
2553 primary = #ffb52a
2554 secondary = #e60053
2555 alert = #bd2c40
2556
2557 [bar/main]
2558 ;monitor = ${env:MONITOR:HDMI-1}
2559 width = 100%
2560 height = 27
2561 ;offset-x = 1%
2562 ;offset-y = 1%
2563 radius = 3.0
2564 fixed-center = true
2565
2566 background = ${colors.background}
2567 foreground = ${colors.foreground}
2568
2569 line-size = 3
2570 line-color = #f00
2571
2572 border-size = 4
2573 border-color = #00000000
2574
2575 padding-left = 0
2576 padding-right = 2
2577
2578 module-margin-left = 2
2579 module-margin-right = 2
2580
2581 font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
2582 font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
2583 font-2 = Wuncon Siji:pixelsize=10;1
2584 font-3 = FontAwesome:pixelsize=10;1
2585
2586 modules-left = bspwm xwindow
2587 modules-center =
2588 modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
2589
2590 tray-position = right
2591 tray-padding = 1
2592 ;tray-transparent = true
2593 ;tray-background = #0063ff
2594 tray-maxsize = 18
2595
2596 wm-restack = bspwm
2597
2598 ;override-redirect = true
2599
2600 scroll-up = bspwm-desknext
2601 scroll-down = bspwm-deskprev
2602
2603 [module/xwindow]
2604 type = internal/xwindow
2605 label = %title:0:50:...%
2606
2607 [module/xkeyboard]
2608 type = internal/xkeyboard
2609 blacklist-0 = num lock
2610
2611 format-prefix = " "
2612 format-prefix-foreground = ${colors.foreground-alt}
2613 format-prefix-underline = ${colors.secondary}
2614
2615 label-layout = %layout%
2616 label-layout-underline = ${colors.secondary}
2617
2618 label-indicator-padding = 2
2619 label-indicator-margin = 1
2620 label-indicator-background = ${colors.secondary}
2621 label-indicator-underline = ${colors.secondary}
2622
2623 [module/filesystem]
2624 type = internal/fs
2625 interval = 25
2626
2627 mount-0 = /
2628
2629 label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
2630 label-unmounted = %mountpoint% not mounted
2631 label-unmounted-foreground = ${colors.foreground-alt}
2632
2633 [module/bspwm]
2634 type = internal/bspwm
2635
2636 label-focused = %index%
2637 label-focused-background = ${colors.background-alt}
2638 label-focused-underline= ${colors.primary}
2639 label-focused-padding = 2
2640
2641 label-occupied = %index%
2642 label-occupied-padding = 2
2643
2644 label-urgent = %index%!
2645 label-urgent-background = ${colors.alert}
2646 label-urgent-padding = 2
2647
2648 label-empty = %index%
2649 label-empty-foreground = ${colors.foreground-alt}
2650 label-empty-padding = 2
2651
2652 [module/i3]
2653 type = internal/i3
2654 format = <label-state> <label-mode>
2655 index-sort = true
2656 wrapping-scroll = false
2657
2658 ; Only show workspaces on the same output as the bar
2659 ;pin-workspaces = true
2660
2661 label-mode-padding = 2
2662 label-mode-foreground = #000
2663 label-mode-background = ${colors.primary}
2664
2665 ; focused = Active workspace on focused monitor
2666 label-focused = %index%
2667 label-focused-background = ${module/bspwm.label-focused-background}
2668 label-focused-underline = ${module/bspwm.label-focused-underline}
2669 label-focused-padding = ${module/bspwm.label-focused-padding}
2670
2671 ; unfocused = Inactive workspace on any monitor
2672 label-unfocused = %index%
2673 label-unfocused-padding = ${module/bspwm.label-occupied-padding}
2674
2675 ; visible = Active workspace on unfocused monitor
2676 label-visible = %index%
2677 label-visible-background = ${self.label-focused-background}
2678 label-visible-underline = ${self.label-focused-underline}
2679 label-visible-padding = ${self.label-focused-padding}
2680
2681 ; urgent = Workspace with urgency hint set
2682 label-urgent = %index%
2683 label-urgent-background = ${module/bspwm.label-urgent-background}
2684 label-urgent-padding = ${module/bspwm.label-urgent-padding}
2685
2686 [module/mpd]
2687 type = internal/mpd
2688 format-online = <label-song>  <icon-prev> <icon-stop> <toggle> <icon-next>
2689
2690 icon-prev = 
2691 icon-stop = 
2692 icon-play = 
2693 icon-pause = 
2694 icon-next = 
2695
2696 label-song-maxlen = 25
2697 label-song-ellipsis = true
2698
2699 [module/xbacklight]
2700 type = internal/xbacklight
2701
2702 format = <label> <bar>
2703 label = BL
2704
2705 bar-width = 10
2706 bar-indicator = |
2707 bar-indicator-foreground = #ff
2708 bar-indicator-font = 2
2709 bar-fill = ─
2710 bar-fill-font = 2
2711 bar-fill-foreground = #9f78e1
2712 bar-empty = ─
2713 bar-empty-font = 2
2714 bar-empty-foreground = ${colors.foreground-alt}
2715
2716 [module/backlight-acpi]
2717 inherit = module/xbacklight
2718 type = internal/backlight
2719 ;card = intel_backlight
2720 card = mba6x_backlight
2721
2722 [module/cpu]
2723 type = internal/cpu
2724 interval = 2
2725 format-prefix = " "
2726 format-prefix-foreground = ${colors.foreground-alt}
2727 format-underline = #f90000
2728 label = %percentage%%
2729
2730 [module/memory]
2731 type = internal/memory
2732 interval = 2
2733 format-prefix = " "
2734 format-prefix-foreground = ${colors.foreground-alt}
2735 format-underline = #4bffdc
2736 label = %percentage_used%%
2737
2738 [module/wlan]
2739 type = internal/network
2740 interface =
2741 interval = 3.0
2742
2743 format-connected = <ramp-signal> <label-connected>
2744 format-connected-underline = #9f78e1
2745 label-connected = %essid%
2746
2747 format-disconnected =
2748 ;format-disconnected = <label-disconnected>
2749 ;format-disconnected-underline = ${self.format-connected-underline}
2750 ;label-disconnected = %ifname% disconnected
2751 ;label-disconnected-foreground = ${colors.foreground-alt}
2752
2753 ramp-signal-0 = 
2754 ramp-signal-1 = 
2755 ramp-signal-2 = 
2756 ramp-signal-3 = 
2757 ramp-signal-4 = 
2758 ramp-signal-foreground = ${colors.foreground-alt}
2759
2760 [module/eth]
2761 type = internal/network
2762 interface =
2763 interval = 3.0
2764
2765 format-connected-underline = #55aa55
2766 format-connected-prefix = " "
2767 format-connected-prefix-foreground = ${colors.foreground-alt}
2768 label-connected = %local_ip%
2769
2770 format-disconnected =
2771 ;format-disconnected = <label-disconnected>
2772 ;format-disconnected-underline = ${self.format-connected-underline}
2773 ;label-disconnected = %ifname% disconnected
2774 ;label-disconnected-foreground = ${colors.foreground-alt}
2775
2776 [module/date]
2777 type = internal/date
2778 interval = 5
2779
2780 date =
2781 date-alt = " %Y-%m-%d"
2782
2783 time = %H:%M
2784 time-alt = %H:%M:%S
2785
2786 format-prefix = 
2787 format-prefix-foreground = ${colors.foreground-alt}
2788 format-underline = #0a6cf5
2789
2790 label = %date% %time%
2791
2792 [module/volume]
2793 type = internal/volume
2794
2795 format-volume = <label-volume> <bar-volume>
2796 label-volume = vol
2797 label-volume-foreground = ${root.foreground}
2798
2799 format-muted-prefix = " "
2800 format-muted-foreground = ${colors.foreground-alt}
2801 label-muted = mute
2802
2803 bar-volume-width = 10
2804 bar-volume-foreground-0 = #55aa55
2805 bar-volume-foreground-1 = #55aa55
2806 bar-volume-foreground-2 = #55aa55
2807 bar-volume-foreground-3 = #55aa55
2808 bar-volume-foreground-4 = #55aa55
2809 bar-volume-foreground-5 = #f5a70a
2810 bar-volume-foreground-6 = #ff5555
2811 bar-volume-gradient = false
2812 bar-volume-indicator = |
2813 bar-volume-indicator-font = 2
2814 bar-volume-fill = ─
2815 bar-volume-fill-font = 2
2816 bar-volume-empty = ─
2817 bar-volume-empty-font = 2
2818 bar-volume-empty-foreground = ${colors.foreground-alt}
2819
2820 [module/battery]
2821 type = internal/battery
2822 battery = BAT0
2823 adapter = ADP1
2824 full-at = 64
2825
2826 format-charging = <animation-charging> <label-charging>
2827 format-charging-underline = #ffb52a
2828
2829 format-discharging = <ramp-capacity> <label-discharging>
2830 format-discharging-underline = ${self.format-charging-underline}
2831
2832 format-full-prefix = " "
2833 format-full-prefix-foreground = ${colors.foreground-alt}
2834 format-full-underline = ${self.format-charging-underline}
2835
2836 ramp-capacity-0 = 
2837 ramp-capacity-1 = 
2838 ramp-capacity-2 = 
2839 ramp-capacity-foreground = ${colors.foreground-alt}
2840
2841 animation-charging-0 = 
2842 animation-charging-1 = 
2843 animation-charging-2 = 
2844 animation-charging-foreground = ${colors.foreground-alt}
2845 animation-charging-framerate = 750
2846
2847 [module/temperature]
2848 type = internal/temperature
2849 thermal-zone = 1
2850 warn-temperature = 66
2851
2852 format = <ramp> <label>
2853 format-underline = #f50a4d
2854 format-warn = <ramp> <label-warn>
2855 format-warn-underline = ${self.format-underline}
2856
2857 label = %temperature%
2858 label-warn = %temperature%
2859 label-warn-foreground = ${colors.secondary}
2860
2861 ramp-0 = 
2862 ramp-1 = 
2863 ramp-2 = 
2864 ramp-foreground = ${colors.foreground-alt}
2865
2866 [module/powermenu]
2867 type = custom/menu
2868
2869 format-spacing = 1
2870
2871 label-open = 
2872 label-open-foreground = ${colors.secondary}
2873 label-close =  cancel
2874 label-close-foreground = ${colors.secondary}
2875 label-separator = |
2876 label-separator-foreground = ${colors.foreground-alt}
2877
2878 menu-0-0 = reboot
2879 menu-0-0-exec = menu-open-1
2880 menu-0-1 = power off
2881 menu-0-1-exec = menu-open-2
2882
2883 menu-1-0 = cancel
2884 menu-1-0-exec = menu-open-0
2885 menu-1-1 = reboot
2886 menu-1-1-exec = sudo reboot
2887
2888 menu-2-0 = power off
2889 menu-2-0-exec = sudo poweroff
2890 menu-2-1 = cancel
2891 menu-2-1-exec = menu-open-0
2892
2893 [module/mail]
2894 type = custom/script
2895 interval = 60
2896 format = <label>
2897 format-prefix = " "
2898 format-prefix-foreground = ${colors.foreground-alt}
2899 format-underline = #0a6cf5
2900 exec = notmuch count tag:unread
2901
2902 [settings]
2903 screenchange-reload = true
2904 ;compositing-background = xor
2905 ;compositing-background = screen
2906 ;compositing-foreground = source
2907 ;compositing-border = over
2908
2909 [global/wm]
2910 margin-top = 0
2911 margin-bottom = 0
2912
2913 ; vim:ft=dosini
2914 #+end_src
2915
2916 *** polybar-launch
2917 :PROPERTIES:
2918 :header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
2919 :END:
2920
2921 #+begin_src sh :tangle no
2922 # Terminate already running bar instances
2923 killall -q polybar
2924
2925 # Wait until the processes have been shut down
2926 while pgrep -x polybar >/dev/null; do sleep 1; done
2927
2928 # Launch main bar
2929 polybar main &
2930
2931 echo "Bars launched..."
2932 #+end_src
2933
2934 ** PowerTOP
2935 :PROPERTIES:
2936 :header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
2937 :END:
2938
2939 #+begin_src conf
2940 [Unit]
2941 Description=Powertop tunings
2942
2943 [Service]
2944 ExecStart=/usr/bin/powertop --auto-tune
2945 RemainAfterExit=true
2946
2947 [Install]
2948 WantedBy=multi-user.target
2949 #+end_src
2950
2951 ** ranger
2952
2953 *** rc.conf
2954 :PROPERTIES:
2955 :header-args+: :tangle ~/.config/ranger/rc.conf
2956 :END:
2957
2958 #+begin_src conf :tangle no
2959 # ===================================================================
2960 # This file contains the default startup commands for ranger.
2961 # To change them, it is recommended to create the file
2962 # ~/.config/ranger/rc.conf and add your custom commands there.
2963 #
2964 # If you copy this whole file there, you may want to set the environment
2965 # variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
2966 #
2967 # The purpose of this file is mainly to define keybindings and settings.
2968 # For running more complex python code, please create a plugin in "plugins/" or
2969 # a command in "commands.py".
2970 #
2971 # Each line is a command that will be run before the user interface
2972 # is initialized.  As a result, you can not use commands which rely
2973 # on the UI such as :delete or :mark.
2974 # ===================================================================
2975
2976 # ===================================================================
2977 # == Options
2978 # ===================================================================
2979
2980 # How many columns are there, and what are their relative widths?
2981 set column_ratios 1,3,4
2982
2983 # Which files should be hidden? (regular expression)
2984 set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
2985
2986 # Show hidden files? You can toggle this by typing 'zh'
2987 set show_hidden false
2988
2989 # Ask for a confirmation when running the "delete" command?
2990 # Valid values are "always" (default), "never", "multiple"
2991 # With "multiple", ranger will ask only if you delete multiple files at once.
2992 set confirm_on_delete multiple
2993
2994 # Which script is used to generate file previews?
2995 # ranger ships with scope.sh, a script that calls external programs (see
2996 # README for dependencies) to preview images, archives, etc.
2997 set preview_script ~/.config/ranger/scope.sh
2998
2999 # Use the external preview script or display simple plain text previews?
3000 set use_preview_script true
3001
3002 # Open all images in this directory when running certain image viewers
3003 # like feh or sxiv?  You can still open selected files by marking them.
3004 set open_all_images true
3005
3006 # Be aware of version control systems and display information.
3007 set vcs_aware false
3008
3009 # State of the three backends git, hg, bzr. The possible states are
3010 # disabled, local (only show local info), enabled (show local and remote
3011 # information).
3012 set vcs_backend_git enabled
3013 set vcs_backend_hg disabled
3014 set vcs_backend_bzr disabled
3015
3016 # Preview images in full color with the external command "w3mimgpreview"?
3017 # This requires the console web browser "w3m" and a supported terminal.
3018 # It has been successfully tested with "xterm" and "urxvt" without tmux.
3019 set preview_images true
3020
3021 # Use a unicode "..." character to mark cut-off filenames?
3022 set unicode_ellipsis false
3023
3024 # Show dotfiles in the bookmark preview box?
3025 set show_hidden_bookmarks true
3026
3027 # Which colorscheme to use?  These colorschemes are available by default:
3028 # default, jungle, snow
3029 set colorscheme default
3030
3031 # Preview files on the rightmost column?
3032 # And collapse (shrink) the last column if there is nothing to preview?
3033 set preview_files true
3034 set preview_directories true
3035 set collapse_preview true
3036
3037 # Save the console history on exit?
3038 set save_console_history true
3039
3040 # Draw the status bar on top of the browser window (default: bottom)
3041 set status_bar_on_top false
3042
3043 # Draw a progress bar in the status bar which displays the average state of all
3044 # currently running tasks which support progress bars?
3045 set draw_progress_bar_in_status_bar true
3046
3047 # Draw borders around columns?
3048 set draw_borders true
3049
3050 # Display the directory name in tabs?
3051 set dirname_in_tabs false
3052
3053 # Enable the mouse support?
3054 set mouse_enabled true
3055
3056 # Display the file size in the main column or status bar?
3057 set display_size_in_main_column true
3058 set display_size_in_status_bar true
3059
3060 # Display files tags in all columns or only in main column?
3061 set display_tags_in_all_columns true
3062
3063 # Set a title for the window?
3064 set update_title false
3065
3066 # Set the title to "ranger" in the tmux program?
3067 set update_tmux_title false
3068
3069 # Shorten the title if it gets long?  The number defines how many
3070 # directories are displayed at once, 0 turns off this feature.
3071 set shorten_title 3
3072
3073 # Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
3074 set tilde_in_titlebar false
3075
3076 # How many directory-changes or console-commands should be kept in history?
3077 set max_history_size 20
3078 set max_console_history_size 50
3079
3080 # Try to keep so much space between the top/bottom border when scrolling:
3081 set scroll_offset 8
3082
3083 # Flush the input after each key hit?  (Noticable when ranger lags)
3084 set flushinput true
3085
3086 # Padding on the right when there's no preview?
3087 # This allows you to click into the space to run the file.
3088 set padding_right true
3089
3090 # Save bookmarks (used with mX and `X) instantly?
3091 # This helps to synchronize bookmarks between multiple ranger
3092 # instances but leads to *slight* performance loss.
3093 # When false, bookmarks are saved when ranger is exited.
3094 set autosave_bookmarks true
3095
3096 # You can display the "real" cumulative size of directories by using the
3097 # command :get_cumulative_size or typing "dc".  The size is expensive to
3098 # calculate and will not be updated automatically.  You can choose
3099 # to update it automatically though by turning on this option:
3100 set autoupdate_cumulative_size false
3101
3102 # Turning this on makes sense for screen readers:
3103 set show_cursor false
3104
3105 # One of: size, basename, mtime, type
3106 set sort natural
3107
3108 # Additional sorting options
3109 set sort_reverse false
3110 set sort_case_insensitive true
3111 set sort_directories_first true
3112
3113 # Enable this if key combinations with the Alt Key don't work for you.
3114 # (Especially on xterm)
3115 set xterm_alt_key false
3116
3117 # ===================================================================
3118 # == Local Options
3119 # ===================================================================
3120 # You can set local options that only affect a single directory.
3121
3122 # Examples:
3123 # setlocal path=~/downloads sort mtime
3124
3125 # ===================================================================
3126 # == Command Aliases in the Console
3127 # ===================================================================
3128
3129 alias e    edit
3130 alias q    quit
3131 alias q!   quitall
3132 alias qall quitall
3133 alias setl setlocal
3134
3135 alias filter     scout -prt
3136 alias find       scout -aet
3137 alias mark       scout -mr
3138 alias unmark     scout -Mr
3139 alias search     scout -rs
3140 alias search_inc scout -rts
3141 alias travel     scout -aefiklst
3142
3143 # ===================================================================
3144 # == Define keys for the browser
3145 # ===================================================================
3146
3147 # Basic
3148 map     Q quit!
3149 map     q quit
3150 copymap q ZZ ZQ
3151
3152 map R     reload_cwd
3153 map <C-r> reset
3154 map <C-l> redraw_window
3155 map <C-c> abort
3156 map <esc> change_mode normal
3157
3158 map i display_file
3159 map ? help
3160 map W display_log
3161 map w taskview_open
3162 map S shell $SHELL
3163
3164 map :  console
3165 map ;  console
3166 map !  console shell
3167 map @  console -p6 shell  %%s
3168 map #  console shell -p
3169 map s  console shell
3170 map r  chain draw_possible_programs; console open_with
3171 map f  console find
3172 map cd console cd
3173
3174 # Tagging / Marking
3175 map t       tag_toggle
3176 map ut      tag_remove
3177 map "<any>  tag_toggle tag=%any
3178 map <Space> mark_files toggle=True
3179 map v       mark_files all=True toggle=True
3180 map uv      mark_files all=True val=False
3181 map V       toggle_visual_mode
3182 map uV      toggle_visual_mode reverse=True
3183
3184 # For the nostalgics: Midnight Commander bindings
3185 map <F1> help
3186 map <F3> display_file
3187 map <F4> edit
3188 map <F5> copy
3189 map <F6> cut
3190 map <F7> console mkdir
3191 map <F8> console delete
3192 map <F10> exit
3193
3194 # In case you work on a keyboard with dvorak layout
3195 map <UP>       move up=1
3196 map <DOWN>     move down=1
3197 map <LEFT>     move left=1
3198 map <RIGHT>    move right=1
3199 map <HOME>     move to=0
3200 map <END>      move to=-1
3201 map <PAGEDOWN> move down=1   pages=True
3202 map <PAGEUP>   move up=1     pages=True
3203 map <CR>       move right=1
3204 map <DELETE>   console delete
3205 map <INSERT>   console touch
3206
3207 # VIM-like
3208 copymap <UP>       k
3209 copymap <DOWN>     j
3210 copymap <LEFT>     h
3211 copymap <RIGHT>    l
3212 copymap <HOME>     gg
3213 copymap <END>      G
3214 copymap <PAGEDOWN> <C-F>
3215 copymap <PAGEUP>   <C-B>
3216
3217 map J  move down=0.5  pages=True
3218 map K  move up=0.5    pages=True
3219 copymap J <C-D>
3220 copymap K <C-U>
3221
3222 # Jumping around
3223 map H     history_go -1
3224 map L     history_go 1
3225 map ]     move_parent 1
3226 map [     move_parent -1
3227 map }     traverse
3228
3229 map gh cd ~
3230 map ge cd /etc
3231 map gu cd /usr
3232 map gd cd /dev
3233 map gl cd -r .
3234 map gL cd -r %f
3235 map go cd /opt
3236 map gv cd /var
3237 map gm cd /media
3238 map gM cd /mnt
3239 map gs cd /srv
3240 map gr cd /
3241 map gR eval fm.cd(ranger.RANGERDIR)
3242 map g/ cd /
3243 map g? cd /usr/share/doc/ranger
3244
3245 # External Programs
3246 map E  edit
3247 map du shell -p du --max-depth=1 -h --apparent-size
3248 map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
3249 map yp shell -d echo -n %d/%f | xsel -i
3250 map yd shell -d echo -n %d    | xsel -i
3251 map yn shell -d echo -n %f    | xsel -i
3252
3253 # Filesystem Operations
3254 map =  chmod
3255
3256 map cw console rename
3257 map A  eval fm.open_console('rename ' + fm.thisfile.basename)
3258 map I  eval fm.open_console('rename ' + fm.thisfile.basename, position=7)
3259
3260 map pp paste
3261 map po paste overwrite=True
3262 map pl paste_symlink relative=False
3263 map pL paste_symlink relative=True
3264 map phl paste_hardlink
3265 map pht paste_hardlinked_subtree
3266
3267 map dd cut
3268 map ud uncut
3269 map da cut mode=add
3270 map dr cut mode=remove
3271
3272 map yy copy
3273 map uy uncut
3274 map ya copy mode=add
3275 map yr copy mode=remove
3276
3277 # Temporary workarounds
3278 map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
3279 map dG  eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
3280 map dj  eval fm.cut(dirarg=dict(down=1), narg=quantifier)
3281 map dk  eval fm.cut(dirarg=dict(up=1), narg=quantifier)
3282 map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
3283 map yG  eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
3284 map yj  eval fm.copy(dirarg=dict(down=1), narg=quantifier)
3285 map yk  eval fm.copy(dirarg=dict(up=1), narg=quantifier)
3286
3287 # Searching
3288 map /  console search
3289 map n  search_next
3290 map N  search_next forward=False
3291 map ct search_next order=tag
3292 map cs search_next order=size
3293 map ci search_next order=mimetype
3294 map cc search_next order=ctime
3295 map cm search_next order=mtime
3296 map ca search_next order=atime
3297
3298 # Tabs
3299 map <C-n>     tab_new ~
3300 map <C-w>     tab_close
3301 map <TAB>     tab_move 1
3302 map <S-TAB>   tab_move -1
3303 map <A-Right> tab_move 1
3304 map <A-Left>  tab_move -1
3305 map gt        tab_move 1
3306 map gT        tab_move -1
3307 map gn        tab_new ~
3308 map gc        tab_close
3309 map uq        tab_restore
3310 map <a-1>     tab_open 1
3311 map <a-2>     tab_open 2
3312 map <a-3>     tab_open 3
3313 map <a-4>     tab_open 4
3314 map <a-5>     tab_open 5
3315 map <a-6>     tab_open 6
3316 map <a-7>     tab_open 7
3317 map <a-8>     tab_open 8
3318 map <a-9>     tab_open 9
3319
3320 # Sorting
3321 map or toggle_option sort_reverse
3322 map os chain set sort=size;      set sort_reverse=False
3323 map ob chain set sort=basename;  set sort_reverse=False
3324 map on chain set sort=natural;   set sort_reverse=False
3325 map om chain set sort=mtime;     set sort_reverse=False
3326 map oc chain set sort=ctime;     set sort_reverse=False
3327 map oa chain set sort=atime;     set sort_reverse=False
3328 map ot chain set sort=type;      set sort_reverse=False
3329
3330 map oS chain set sort=size;      set sort_reverse=True
3331 map oB chain set sort=basename;  set sort_reverse=True
3332 map oN chain set sort=natural;   set sort_reverse=True
3333 map oM chain set sort=mtime;     set sort_reverse=True
3334 map oC chain set sort=ctime;     set sort_reverse=True
3335 map oA chain set sort=atime;     set sort_reverse=True
3336 map oT chain set sort=type;      set sort_reverse=True
3337
3338 map dc get_cumulative_size
3339
3340 # Settings
3341 map zc    toggle_option collapse_preview
3342 map zd    toggle_option sort_directories_first
3343 map zh    toggle_option show_hidden
3344 map <C-h> toggle_option show_hidden
3345 map zi    toggle_option flushinput
3346 map zm    toggle_option mouse_enabled
3347 map zp    toggle_option preview_files
3348 map zP    toggle_option preview_directories
3349 map zs    toggle_option sort_case_insensitive
3350 map zu    toggle_option autoupdate_cumulative_size
3351 map zv    toggle_option use_preview_script
3352 map zf    console filter
3353
3354 # Bookmarks
3355 map `<any>  enter_bookmark %any
3356 map '<any>  enter_bookmark %any
3357 map m<any>  set_bookmark %any
3358 map um<any> unset_bookmark %any
3359
3360 map m<bg>   draw_bookmarks
3361 copymap m<bg>  um<bg> `<bg> '<bg>
3362
3363 # Generate all the chmod bindings with some python help:
3364 eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
3365 eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
3366 eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
3367 eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
3368 eval for arg in "rwxXst": cmd("map +{0}  shell -d chmod u+{0} %s".format(arg))
3369
3370 eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
3371 eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
3372 eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
3373 eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
3374 eval for arg in "rwxXst": cmd("map -{0}  shell -d chmod u-{0} %s".format(arg))
3375
3376 # ===================================================================
3377 # == Define keys for the console
3378 # ===================================================================
3379 # Note: Unmapped keys are passed directly to the console.
3380
3381 # Basic
3382 cmap <tab>   eval fm.ui.console.tab()
3383 cmap <s-tab> eval fm.ui.console.tab(-1)
3384 cmap <ESC>   eval fm.ui.console.close()
3385 cmap <CR>    eval fm.ui.console.execute()
3386 cmap <C-l>   redraw_window
3387
3388 copycmap <ESC> <C-c>
3389 copycmap <CR>  <C-j>
3390
3391 # Move around
3392 cmap <up>    eval fm.ui.console.history_move(-1)
3393 cmap <down>  eval fm.ui.console.history_move(1)
3394 cmap <left>  eval fm.ui.console.move(left=1)
3395 cmap <right> eval fm.ui.console.move(right=1)
3396 cmap <home>  eval fm.ui.console.move(right=0, absolute=True)
3397 cmap <end>   eval fm.ui.console.move(right=-1, absolute=True)
3398
3399 # Line Editing
3400 cmap <backspace>  eval fm.ui.console.delete(-1)
3401 cmap <delete>     eval fm.ui.console.delete(0)
3402 cmap <C-w>        eval fm.ui.console.delete_word()
3403 cmap <C-k>        eval fm.ui.console.delete_rest(1)
3404 cmap <C-u>        eval fm.ui.console.delete_rest(-1)
3405 cmap <C-y>        eval fm.ui.console.paste()
3406
3407 # And of course the emacs way
3408 copycmap <up>        <C-p>
3409 copycmap <down>      <C-n>
3410 copycmap <left>      <C-b>
3411 copycmap <right>     <C-f>
3412 copycmap <home>      <C-a>
3413 copycmap <end>       <C-e>
3414 copycmap <delete>    <C-d>
3415 copycmap <backspace> <C-h>
3416
3417 # Note: There are multiple ways to express backspaces.  <backspace> (code 263)
3418 # and <backspace2> (code 127).  To be sure, use both.
3419 copycmap <backspace> <backspace2>
3420
3421 # This special expression allows typing in numerals:
3422 cmap <allow_quantifiers> false
3423
3424 # ===================================================================
3425 # == Pager Keybindings
3426 # ===================================================================
3427
3428 # Movement
3429 pmap  <down>      pager_move  down=1
3430 pmap  <up>        pager_move  up=1
3431 pmap  <left>      pager_move  left=4
3432 pmap  <right>     pager_move  right=4
3433 pmap  <home>      pager_move  to=0
3434 pmap  <end>       pager_move  to=-1
3435 pmap  <pagedown>  pager_move  down=1.0  pages=True
3436 pmap  <pageup>    pager_move  up=1.0    pages=True
3437 pmap  <C-d>       pager_move  down=0.5  pages=True
3438 pmap  <C-u>       pager_move  up=0.5    pages=True
3439
3440 copypmap <UP>       k  <C-p>
3441 copypmap <DOWN>     j  <C-n> <CR>
3442 copypmap <LEFT>     h
3443 copypmap <RIGHT>    l
3444 copypmap <HOME>     g
3445 copypmap <END>      G
3446 copypmap <C-d>      d
3447 copypmap <C-u>      u
3448 copypmap <PAGEDOWN> n  f  <C-F>  <Space>
3449 copypmap <PAGEUP>   p  b  <C-B>
3450
3451 # Basic
3452 pmap     <ESC> pager_close
3453 copypmap <ESC> q Q i <F3>
3454 pmap E      edit_file
3455
3456 # ===================================================================
3457 # == Taskview Keybindings
3458 # ===================================================================
3459
3460 # Movement
3461 tmap <up>        taskview_move up=1
3462 tmap <down>      taskview_move down=1
3463 tmap <home>      taskview_move to=0
3464 tmap <end>       taskview_move to=-1
3465 tmap <pagedown>  taskview_move down=1.0  pages=True
3466 tmap <pageup>    taskview_move up=1.0    pages=True
3467 tmap <C-d>       taskview_move down=0.5  pages=True
3468 tmap <C-u>       taskview_move up=0.5    pages=True
3469
3470 copytmap <UP>       k  <C-p>
3471 copytmap <DOWN>     j  <C-n> <CR>
3472 copytmap <HOME>     g
3473 copytmap <END>      G
3474 copytmap <C-u>      u
3475 copytmap <PAGEDOWN> n  f  <C-F>  <Space>
3476 copytmap <PAGEUP>   p  b  <C-B>
3477
3478 # Changing priority and deleting tasks
3479 tmap J          eval -q fm.ui.taskview.task_move(-1)
3480 tmap K          eval -q fm.ui.taskview.task_move(0)
3481 tmap dd         eval -q fm.ui.taskview.task_remove()
3482 tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
3483 tmap <pageup>   eval -q fm.ui.taskview.task_move(0)
3484 tmap <delete>   eval -q fm.ui.taskview.task_remove()
3485
3486 # Basic
3487 tmap <ESC> taskview_close
3488 copytmap <ESC> q Q w <C-c>
3489 #+end_src
3490
3491 *** scope.sh
3492 :PROPERTIES:
3493 :header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
3494 :END:
3495
3496 #+begin_src sh :tangle no
3497 # ranger supports enhanced previews.  If the option "use_preview_script"
3498 # is set to True and this file exists, this script will be called and its
3499 # output is displayed in ranger.  ANSI color codes are supported.
3500
3501 # NOTES: This script is considered a configuration file.  If you upgrade
3502 # ranger, it will be left untouched. (You must update it yourself.)
3503 # Also, ranger disables STDIN here, so interactive scripts won't work properly
3504
3505 # Meanings of exit codes:
3506 # code | meaning    | action of ranger
3507 # -----+------------+-------------------------------------------
3508 # 0    | success    | success. display stdout as preview
3509 # 1    | no preview | failure. display no preview at all
3510 # 2    | plain text | display the plain content of the file
3511 # 3    | fix width  | success. Don't reload when width changes
3512 # 4    | fix height | success. Don't reload when height changes
3513 # 5    | fix both   | success. Don't ever reload
3514
3515 # Meaningful aliases for arguments:
3516 path="$1"    # Full path of the selected file
3517 width="$2"   # Width of the preview pane (number of fitting characters)
3518 height="$3"  # Height of the preview pane (number of fitting characters)
3519
3520 maxln=200    # Stop after $maxln lines.  Can be used like ls | head -n $maxln
3521
3522 # Find out something about the file:
3523 mimetype=$(file --mime-type -Lb "$path")
3524 extension=${path##*.}
3525
3526 # Functions:
3527 # runs a command and saves its output into $output.  Useful if you need
3528 # the return value AND want to use the output in a pipe
3529 try() { output=$(eval '"$@"'); }
3530
3531 # writes the output of the previouosly used "try" command
3532 dump() { echo "$output"; }
3533
3534 # a common post-processing function used after most commands
3535 trim() { head -n "$maxln"; }
3536
3537 # wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
3538 highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }
3539
3540 case "$extension" in
3541     # Archive extensions:
3542     7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
3543     rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
3544         try als "$path" && { dump | trim; exit 0; }
3545         try acat "$path" && { dump | trim; exit 3; }
3546         try bsdtar -lf "$path" && { dump | trim; exit 0; }
3547         exit 1;;
3548     rar)
3549         try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
3550     # PDF documents:
3551     pdf)
3552         try pdftotext -l 10 -nopgbrk -q "$path" - && \
3553             { dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
3554     # BitTorrent Files
3555     torrent)
3556         try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
3557     # HTML Pages:
3558     htm|html|xhtml)
3559         try w3m    -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3560         try lynx   -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3561         try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3562         ;; # fall back to highlight/cat if the text browsers fail
3563 esac
3564
3565 case "$mimetype" in
3566     # Syntax highlight for text files:
3567     text/* | */xml)
3568         try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
3569     # Ascii-previews of images:
3570     image/*)
3571         img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
3572     # Display information about media files:
3573     video/* | audio/*)
3574         exiftool "$path" && exit 5
3575         # Use sed to remove spaces so the output fits into the narrow window
3576         try mediainfo "$path" && { dump | trim | sed 's/  \+:/: /;';  exit 5; } || exit 1;;
3577 esac
3578
3579 exit 1
3580 #+end_src
3581
3582 ** redshift
3583 :PROPERTIES:
3584 :header-args+: :tangle ~/.config/redshift.conf :comments none
3585 :END:
3586
3587 #+begin_src conf
3588 ; Global settings for redshift
3589 [redshift]
3590 ; Set the day and night screen temperatures (Neutral is 6500K)
3591 ;temp-day=5700
3592 ;temp-night=3500
3593
3594 ;temp-day=6500
3595 temp-day=6200
3596 ;temp-night=4800
3597 ;temp-night=5000
3598 ;temp-night=4500
3599 temp-night=4000
3600
3601 ; Enable/Disable a smooth transition between day and night
3602 ; 0 will cause a direct change from day to night screen temperature.
3603 ; 1 will gradually increase or decrease the screen temperature.
3604 transition=1
3605
3606 ; Set the screen brightness. Default is 1.0.
3607 ;brightness=0.9
3608 ; It is also possible to use different settings for day and night
3609 ; since version 1.8.
3610 ;brightness-day=0.7
3611 ;brightness-night=0.4
3612 ; Set the screen gamma (for all colors, or each color channel
3613 ; individually)
3614 ;gamma=0.8
3615 ;gamma=1.0
3616 ;gamma=0.8:0.7:0.8
3617 ; This can also be set individually for day and night since
3618 ; version 1.10.
3619 ;gamma-day=0.8:0.7:0.8
3620 ;gamma-night=0.6
3621
3622 ; Set the location-provider: 'geoclue2' or 'manual'
3623 ; type 'redshift -l list' to see possible values.
3624 ; The location provider settings are in a different section.
3625 ;location-provider=manual
3626 location-provider=geoclue2
3627
3628 ; Set the adjustment-method: 'randr', 'vidmode'
3629 ; type 'redshift -m list' to see all possible values.
3630 ; 'randr' is the preferred method, 'vidmode' is an older API.
3631 ; but works in some cases when 'randr' does not.
3632 ; The adjustment method settings are in a different section.
3633 adjustment-method=randr
3634
3635 ; Configuration of the location-provider:
3636 ; type 'redshift -l PROVIDER:help' to see the settings.
3637 ; ex: 'redshift -l manual:help'
3638 ; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
3639 ; are negative numbers.
3640 ;[manual]
3641 ;lat=48.1
3642 ;lon=11.6
3643
3644 ; Configuration of the adjustment-method
3645 ; type 'redshift -m METHOD:help' to see the settings.
3646 ; ex: 'redshift -m randr:help'
3647 ; In this example, randr is configured to adjust screen 1.
3648 ; Note that the numbering starts from 0, so this is actually the
3649 ; second screen. If this option is not specified, Redshift will try
3650 ; to adjust _all_ screens.
3651 ;[randr]
3652 ;screen=1
3653 #+end_src
3654
3655 ** rofi
3656 :PROPERTIES:
3657 :header-args+: :tangle ~/.config/rofi/config
3658 :END:
3659
3660 #+begin_src conf
3661 rofi.font: Ubuntu Mono 13
3662 ! rofi.font: Inconsolata 16
3663 ! rofi.font: Iosevka 13
3664 ! rofi.font: Source Code Pro 11
3665 rofi.modi: run,window
3666 ! rofi.width: 640
3667 rofi.width: 600
3668 !rofi.location: 2
3669 !rofi.yoffset: 200
3670 rofi.monitor: -1
3671 !rofi.lines: 10
3672
3673 !rofi.theme: /usr/share/rofi/themes//Arc.rasi
3674 !rofi.theme: /usr/share/rofi/themes//Paper.rasi
3675 !rofi.theme: /usr/share/rofi/themes//sidebar.rasi
3676
3677 rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
3678 #+end_src
3679
3680 ** rofi-pass
3681 :PROPERTIES:
3682 :header-args+: :tangle ~/.config/rofi-pass/config
3683 :END:
3684
3685 #+begin_src conf
3686 # permanently set alternative root dir
3687 # root=/path/to/root
3688
3689 # rofi command. Make sure to have "$@" as last argument
3690 _rofi () {
3691     #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
3692     rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
3693 }
3694
3695 # xdotool needs the keyboard layout to be set using setxkbmap
3696 # You can do this in your autostart scripts (e.g. xinitrc)
3697
3698 # If for some reason, you cannot do this, you can set the command here.
3699 # and set fix_layout to true
3700 fix_layout=false
3701
3702 layout_cmd () {
3703   setxkbmap us
3704 }
3705
3706 # fields to be used
3707 URL_field='url'
3708 USERNAME_field='user'
3709 AUTOTYPE_field='autotype'
3710
3711 # delay to be used for :delay keyword
3712 delay=2
3713
3714 ## Programs to be used
3715 # Editor
3716 EDITOR='gvim -f'
3717
3718 # Browser
3719 BROWSER='chromium'
3720
3721 ## Misc settings
3722
3723 default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
3724 auto_enter='false'
3725 notify='false'
3726 default_autotype='user :tab pass'
3727
3728 # color of the help messages
3729 # leave empty for autodetection
3730 help_color="#4872FF"
3731
3732 # Clipboard settings
3733 # Possible options: primary, clipboard, both
3734 clip=primary
3735
3736 # Options for generating new password entries
3737 # default_user is also used for password files that have no user field.
3738 default_user=aminb
3739 default_user2=aminban
3740 password_length=30
3741
3742 # Custom Keybindings
3743 #autotype="Alt+1"
3744 autotype="Alt+m"
3745 type_user="Alt+2"
3746 type_pass="Alt+3"
3747 open_url="Alt+4"
3748 copy_name="Alt+u"
3749 copy_url="Alt+l"
3750 copy_pass="Alt+p"
3751 show="Alt+o"
3752 copy_entry="Alt+2"
3753 type_entry="Alt+1"
3754 copy_menu="Alt+c"
3755 action_menu="Alt+a"
3756 type_menu="Alt+t"
3757 help="Alt+h"
3758 switch="Alt+x"
3759 insert_pass="Alt+n"
3760 #+end_src
3761
3762 ** sway
3763 :PROPERTIES:
3764 :header-args+: :tangle ~/.config/sway/config
3765 :END:
3766
3767 #+begin_src conf
3768 exec xrdb .Xresources
3769 exec dunst
3770 ### Variables
3771 # super
3772 set $mod Mod4
3773 # alt
3774 set $mod2 Mod1
3775 set $left h
3776 set $down j
3777 set $up k
3778 set $right l
3779 set $term urxvt
3780 set $menu rofi -show run -display-run '> ' -display-window ' 🗔 '
3781
3782 ### Output configuration
3783 #
3784 # Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/)
3785 output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
3786 #
3787 # Example configuration:
3788 #
3789 #   output HDMI-A-1 resolution 1920x1080 position 1920,0
3790 #
3791 # You can get the names of your outputs by running: swaymsg -t get_outputs
3792
3793 ### Idle configuration
3794 #
3795 # Example configuration:
3796 #
3797 #exec swayidle \
3798 #    timeout 300 'swaylock -c 000000' \
3799 #    timeout 600 'swaymsg "output * dpms off"' \
3800 #       resume 'swaymsg "output * dpms on"' \
3801 #    before-sleep 'swaylock -c 000000'
3802 #
3803 # This will lock your screen after 300 seconds of inactivity, then turn off
3804 # your displays after another 600 seconds, and turn your screens back on when
3805 # resumed. It will also lock your screen before your computer goes to sleep.
3806
3807 ### Input configuration
3808
3809 input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
3810     dwt enabled
3811     tap enabled
3812     natural_scroll enabled
3813     middle_emulation enabled
3814     click_method clickfinger
3815 }
3816
3817 input "1:1:AT_Translated_Set_2_keyboard" {
3818     repeat_delay 200
3819     repeat_rate 45
3820     xkb_layout us,ir
3821     xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
3822 }
3823
3824
3825 ### Key bindings
3826 #
3827 # Basics:
3828 #
3829     # start a terminal
3830     bindsym $mod+Return exec $term
3831
3832     # kill focused window
3833     bindsym $mod+Shift+q kill
3834
3835     # start your launcher
3836     bindsym $mod+d exec $menu
3837
3838     # password manager
3839     bindsym $mod2+space exec rofi-pass
3840
3841     # Drag floating windows by holding down $mod and left mouse button.
3842     # Resize them with right mouse button + $mod.
3843     # Despite the name, also works for non-floating windows.
3844     # Change normal to inverse to use left mouse button for resizing and right
3845     # mouse button for dragging.
3846     floating_modifier $mod normal
3847
3848     # reload the configuration file
3849     bindsym $mod+Shift+c reload
3850
3851     # exit sway (logs you out of your wayland session)
3852     bindsym $mod+Shift+e exit
3853
3854     bindsym $mod+apostrophe exec rofi-light        # rofi-based brightness chooser
3855     bindsym XF86MonBrightnessUp exec light -A 5    # increase screen brightness
3856     bindsym XF86MonBrightnessDown exec light -U 5  # decrease screen brightness
3857
3858     bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
3859     bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
3860     bindsym XF86AudioMute exec pamixer --toggle-mute
3861     bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
3862
3863     # original sway workspace switch and window move
3864     bindsym $mod+bracketleft workspace prev
3865     bindsym $mod+bracketright workspace next
3866     bindsym $mod+braceleft move container to workspace prev
3867     bindsym $mod+braceright move container to workspace next
3868
3869     # bspwm-esque workspace switch and window move
3870     bindsym $mod2+bracketleft exec sway-ws-util switch prev
3871     bindsym $mod2+bracketright exec sway-ws-util switch next
3872     bindsym $mod2+braceleft exec sway-ws-util move prev follow
3873     bindsym $mod2+braceright exec sway-ws-util move next follow
3874 #
3875 # Moving around:
3876 #
3877     # Move your focus around
3878     bindsym $mod+$left focus left
3879     bindsym $mod+$down focus down
3880     bindsym $mod+$up focus up
3881     bindsym $mod+$right focus right
3882     # or use $mod+[up|down|left|right]
3883     bindsym $mod+Left focus left
3884     bindsym $mod+Down focus down
3885     bindsym $mod+Up focus up
3886     bindsym $mod+Right focus right
3887
3888     # _move_ the focused window with the same, but add Shift
3889     bindsym $mod+Shift+$left move left
3890     bindsym $mod+Shift+$down move down
3891     bindsym $mod+Shift+$up move up
3892     bindsym $mod+Shift+$right move right
3893     # ditto, with arrow keys
3894     bindsym $mod+Shift+Left move left
3895     bindsym $mod+Shift+Down move down
3896     bindsym $mod+Shift+Up move up
3897     bindsym $mod+Shift+Right move right
3898 #
3899 # Workspaces:
3900 #
3901     # switch to workspace
3902     bindsym $mod+1 workspace 1
3903     bindsym $mod+2 workspace 2
3904     bindsym $mod+3 workspace 3
3905     bindsym $mod+4 workspace 4
3906     bindsym $mod+5 workspace 5
3907     bindsym $mod+6 workspace 6
3908     bindsym $mod+7 workspace 7
3909     bindsym $mod+8 workspace 8
3910     bindsym $mod+9 workspace 9
3911     bindsym $mod+0 workspace 10
3912     # move focused container to workspace
3913     bindsym $mod+Shift+1 move container to workspace 1
3914     bindsym $mod+Shift+2 move container to workspace 2
3915     bindsym $mod+Shift+3 move container to workspace 3
3916     bindsym $mod+Shift+4 move container to workspace 4
3917     bindsym $mod+Shift+5 move container to workspace 5
3918     bindsym $mod+Shift+6 move container to workspace 6
3919     bindsym $mod+Shift+7 move container to workspace 7
3920     bindsym $mod+Shift+8 move container to workspace 8
3921     bindsym $mod+Shift+9 move container to workspace 9
3922     bindsym $mod+Shift+0 move container to workspace 10
3923     # Note: workspaces can have any name you want, not just numbers.
3924     # We just use 1-10 as the default.
3925 #
3926 # Layout stuff:
3927 #
3928     # You can "split" the current object of your focus with
3929     # $mod+b or $mod+v, for horizontal and vertical splits
3930     # respectively.
3931     bindsym $mod+b splith
3932     bindsym $mod+v splitv
3933
3934     # Switch the current container between different layout styles
3935     bindsym $mod+s layout stacking
3936     bindsym $mod+w layout tabbed
3937     bindsym $mod+e layout toggle split
3938
3939     # Make the current focus fullscreen
3940     bindsym $mod+f fullscreen
3941
3942     # Toggle the current focus between tiling and floating mode
3943     bindsym $mod+Shift+space floating toggle
3944
3945     # Swap focus between the tiling area and the floating area
3946     bindsym $mod+space focus mode_toggle
3947
3948     # move focus to the parent container
3949     bindsym $mod+a focus parent
3950 #
3951 # Scratchpad:
3952 #
3953     # Sway has a "scratchpad", which is a bag of holding for windows.
3954     # You can send windows there and get them back later.
3955
3956     # Move the currently focused window to the scratchpad
3957     bindsym $mod+Shift+minus move scratchpad
3958
3959     # Show the next scratchpad window or hide the focused scratchpad window.
3960     # If there are multiple scratchpad windows, this command cycles through them.
3961     bindsym $mod+minus scratchpad show
3962 #
3963 # Resizing containers:
3964 #
3965 mode "resize" {
3966     # left will shrink the containers width
3967     # right will grow the containers width
3968     # up will shrink the containers height
3969     # down will grow the containers height
3970     bindsym $left resize shrink width 10px
3971     bindsym $down resize grow height 10px
3972     bindsym $up resize shrink height 10px
3973     bindsym $right resize grow width 10px
3974
3975     # ditto, with arrow keys
3976     bindsym Left resize shrink width 10px
3977     bindsym Down resize grow height 10px
3978     bindsym Up resize shrink height 10px
3979     bindsym Right resize grow width 10px
3980
3981     # return to default mode
3982     bindsym Return mode "default"
3983     bindsym Escape mode "default"
3984 }
3985 bindsym $mod+Shift+r mode "resize"
3986
3987 #
3988 # Status Bar:
3989 #
3990 # Read `man 5 sway-bar` for more information about this section.
3991 bar {
3992     position bottom
3993     colors {
3994         statusline #ffffff
3995         background #323232
3996         inactive_workspace #32323200 #32323200 #5c5c5c
3997     }
3998     status_command i3status
3999 }
4000
4001 include /etc/sway/config.d/*
4002 #+end_src
4003
4004 ** TLP
4005
4006 *** TODO enigma
4007 *** archy
4008
4009 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "archy")) "/sudo::/etc/default/tlp")
4010 # ------------------------------------------------------------------------------
4011 # tlp - Parameters for power saving
4012 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
4013
4014 # Hint: some features are disabled by default, remove the leading # to enable
4015 # them.
4016
4017 # Set to 0 to disable, 1 to enable TLP.
4018 TLP_ENABLE=1
4019
4020 # Operation mode when no power supply can be detected: AC, BAT.
4021 # Concerns some desktop and embedded hardware only.
4022 TLP_DEFAULT_MODE=AC
4023
4024 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
4025 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
4026 TLP_PERSISTENT_DEFAULT=0
4027
4028 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
4029 # Non-zero value enables, zero disables laptop mode.
4030 DISK_IDLE_SECS_ON_AC=0
4031 DISK_IDLE_SECS_ON_BAT=2
4032
4033 # Dirty page values (timeouts in secs).
4034 MAX_LOST_WORK_SECS_ON_AC=15
4035 MAX_LOST_WORK_SECS_ON_BAT=60
4036
4037 # Hint: CPU parameters below are disabled by default, remove the leading #
4038 # to enable them, otherwise kernel default values are used.
4039
4040 # Select a CPU frequency scaling governor.
4041 # Intel Core i processor with intel_pstate driver:
4042 #   powersave(*), performance.
4043 # Older hardware with acpi-cpufreq driver:
4044 #   ondemand(*), powersave, performance, conservative, schedutil.
4045 # (*) is recommended.
4046 # Hint: use tlp-stat -p to show the active driver and available governors.
4047 # Important:
4048 #   powersave for intel_pstate and ondemand for acpi-cpufreq are power
4049 #   efficient for *almost all* workloads and therefore kernel and most
4050 #   distributions have chosen them as defaults. If you still want to change,
4051 #   you should know what you're doing! You *must* disable your distribution's
4052 #   governor settings or conflicts will occur.
4053 #CPU_SCALING_GOVERNOR_ON_AC=powersave
4054 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
4055
4056 # Set the min/max frequency available for the scaling governor.
4057 # Possible values strongly depend on your CPU. For available frequencies see
4058 # the output of tlp-stat -p.
4059 #CPU_SCALING_MIN_FREQ_ON_AC=0
4060 #CPU_SCALING_MAX_FREQ_ON_AC=0
4061 #CPU_SCALING_MIN_FREQ_ON_BAT=0
4062 #CPU_SCALING_MAX_FREQ_ON_BAT=0
4063
4064 # Set energy performance hints (HWP) for Intel P-state governor:
4065 #   performance, balance_performance, default, balance_power, power
4066 # Values are given in order of increasing power saving.
4067 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
4068 CPU_HWP_ON_AC=balance_performance
4069 CPU_HWP_ON_BAT=balance_power
4070
4071 # Set Intel P-state performance: 0..100 (%).
4072 # Limit the max/min P-state to control the power dissipation of the CPU.
4073 # Values are stated as a percentage of the available performance.
4074 # Requires an Intel Core i processor with intel_pstate driver.
4075 #CPU_MIN_PERF_ON_AC=0
4076 #CPU_MAX_PERF_ON_AC=100
4077 #CPU_MIN_PERF_ON_BAT=0
4078 #CPU_MAX_PERF_ON_BAT=30
4079
4080 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
4081 # Requires an Intel Core i processor.
4082 # Important:
4083 # - This may conflict with your distribution's governor settings
4084 # - A value of 1 does *not* activate boosting, it just allows it
4085 #CPU_BOOST_ON_AC=1
4086 #CPU_BOOST_ON_BAT=0
4087
4088 # Minimize number of used CPU cores/hyper-threads under light load conditions:
4089 #   0=disable, 1=enable.
4090 SCHED_POWERSAVE_ON_AC=0
4091 SCHED_POWERSAVE_ON_BAT=1
4092
4093 # Kernel NMI Watchdog:
4094 #   0=disable (default, saves power), 1=enable (for kernel debugging only).
4095 NMI_WATCHDOG=0
4096
4097 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
4098 # Frequency voltage pairs are written to:
4099 #   /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
4100 # CAUTION: only use this, if you thoroughly understand what you are doing!
4101 #PHC_CONTROLS="F:V F:V F:V F:V"
4102
4103 # Set CPU performance versus energy savings policy:
4104 #   performance, balance-performance, default, balance-power, power.
4105 # Values are given in order of increasing power saving.
4106 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
4107 ENERGY_PERF_POLICY_ON_AC=performance
4108 ENERGY_PERF_POLICY_ON_BAT=balance-power
4109
4110 # Disk devices; separate multiple devices with spaces (default: sda).
4111 # Devices can be specified by disk ID also (lookup with: tlp diskid).
4112 DISK_DEVICES="sda sdb"
4113
4114 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
4115 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
4116 # Separate values for multiple disks with spaces. Use the special value 'keep'
4117 # to keep the hardware default for the particular disk.
4118 DISK_APM_LEVEL_ON_AC="254 254"
4119 DISK_APM_LEVEL_ON_BAT="128 128"
4120
4121 # Hard disk spin down timeout:
4122 #   0:        spin down disabled
4123 #   1..240:   timeouts from 5s to 20min (in units of 5s)
4124 #   241..251: timeouts from 30min to 5.5 hours (in units of 30min)
4125 # See 'man hdparm' for details.
4126 # Separate values for multiple disks with spaces. Use the special value 'keep'
4127 # to keep the hardware default for the particular disk.
4128 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
4129 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
4130
4131 # Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
4132 # Separate values for multiple disks with spaces. Use the special value 'keep'
4133 # to keep the kernel default scheduler for the particular disk.
4134 #DISK_IOSCHED="cfq cfq"
4135
4136 # AHCI link power management (ALPM) for disk devices:
4137 #   min_power, med_power_with_dipm(*), medium_power, max_performance.
4138 # (*) Kernel >= 4.15 required, then recommended.
4139 # Multiple values separated with spaces are tried sequentially until success.
4140 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
4141 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
4142
4143 # Exclude host devices from AHCI link power management.
4144 # Separate multiple hosts with spaces.
4145 #SATA_LINKPWR_BLACKLIST="host1"
4146
4147 # Runtime Power Management for AHCI host and disks devices:
4148 #   on=disable, auto=enable.
4149 # EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
4150 #AHCI_RUNTIME_PM_ON_AC=on
4151 #AHCI_RUNTIME_PM_ON_BAT=on
4152
4153 # Seconds of inactivity before disk is suspended.
4154 AHCI_RUNTIME_PM_TIMEOUT=15
4155
4156 # PCI Express Active State Power Management (PCIe ASPM):
4157 #   default, performance, powersave.
4158 PCIE_ASPM_ON_AC=performance
4159 PCIE_ASPM_ON_BAT=powersave
4160
4161 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
4162 # auto = mid on BAT, high on AC; default = use hardware defaults.
4163 RADEON_POWER_PROFILE_ON_AC=high
4164 RADEON_POWER_PROFILE_ON_BAT=low
4165
4166 # Radeon dynamic power management method (DPM): battery, performance.
4167 RADEON_DPM_STATE_ON_AC=performance
4168 RADEON_DPM_STATE_ON_BAT=battery
4169
4170 # Radeon DPM performance level: auto, low, high; auto is recommended.
4171 RADEON_DPM_PERF_LEVEL_ON_AC=auto
4172 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4173
4174 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4175 WIFI_PWR_ON_AC=off
4176 WIFI_PWR_ON_BAT=on
4177
4178 # Disable wake on LAN: Y/N.
4179 WOL_DISABLE=Y
4180
4181 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4182 # A value of 0 disables, >=1 enables power saving (recommended: 1).
4183 SOUND_POWER_SAVE_ON_AC=0
4184 SOUND_POWER_SAVE_ON_BAT=0
4185
4186 # Disable controller too (HDA only): Y/N.
4187 SOUND_POWER_SAVE_CONTROLLER=N
4188
4189 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4190 # Drive can be powered on again by releasing (and reinserting) the eject lever
4191 # or by pressing the disc eject button on newer models.
4192 # Note: an UltraBay/MediaBay hard disk is never powered off.
4193 BAY_POWEROFF_ON_AC=0
4194 BAY_POWEROFF_ON_BAT=0
4195 # Optical drive device to power off (default sr0).
4196 BAY_DEVICE="sr0"
4197
4198 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4199 RUNTIME_PM_ON_AC=on
4200 RUNTIME_PM_ON_BAT=auto
4201
4202 # Exclude PCI(e) device adresses the following list from Runtime PM
4203 # (separate with spaces). Use lspci to get the adresses (1st column).
4204 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4205 RUNTIME_PM_BLACKLIST="01:00.0"
4206
4207 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4208 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4209 # prevents accidential power-on of dGPU in hybrid graphics setups.
4210 # Use "" to disable the feature completely.
4211 # Separate multiple drivers with spaces.
4212 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4213
4214 # Set to 0 to disable, 1 to enable USB autosuspend feature.
4215 USB_AUTOSUSPEND=1
4216
4217 # Exclude listed devices from USB autosuspend (separate with spaces).
4218 # Use lsusb to get the ids.
4219 # Note: input devices (usbhid) are excluded automatically
4220 #USB_BLACKLIST="1111:2222 3333:4444"
4221
4222 # Bluetooth devices are excluded from USB autosuspend:
4223 #   0=do not exclude, 1=exclude.
4224 USB_BLACKLIST_BTUSB=0
4225
4226 # Phone devices are excluded from USB autosuspend:
4227 #   0=do not exclude, 1=exclude (enable charging).
4228 USB_BLACKLIST_PHONE=0
4229
4230 # Printers are excluded from USB autosuspend:
4231 #   0=do not exclude, 1=exclude.
4232 USB_BLACKLIST_PRINTER=1
4233
4234 # WWAN devices are excluded from USB autosuspend:
4235 #   0=do not exclude, 1=exclude.
4236 USB_BLACKLIST_WWAN=1
4237
4238 # Include listed devices into USB autosuspend even if already excluded
4239 # by the blacklists above (separate with spaces).
4240 # Use lsusb to get the ids.
4241 #USB_WHITELIST="1111:2222 3333:4444"
4242
4243 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4244 # (workaround for USB devices that cause shutdown problems).
4245 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4246
4247 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4248 # on system startup: 0=disable, 1=enable.
4249 # Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4250 #   are ignored when this is enabled!
4251 #RESTORE_DEVICE_STATE_ON_STARTUP=0
4252 RESTORE_DEVICE_STATE_ON_STARTUP=1
4253
4254 # Radio devices to disable on startup: bluetooth, wifi, wwan.
4255 # Separate multiple devices with spaces.
4256 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
4257
4258 # Radio devices to enable on startup: bluetooth, wifi, wwan.
4259 # Separate multiple devices with spaces.
4260 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4261
4262 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4263 # (workaround for devices that are blocking shutdown).
4264 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4265
4266 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4267 # (to prevent other operating systems from missing radios).
4268 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4269
4270 # Radio devices to enable on AC: bluetooth, wifi, wwan.
4271 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4272
4273 # Radio devices to disable on battery: bluetooth, wifi, wwan.
4274 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4275
4276 # Radio devices to disable on battery when not in use (not connected):
4277 #   bluetooth, wifi, wwan.
4278 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4279
4280 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4281 # required). Charging starts when the remaining capacity falls below the
4282 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4283 # Main / Internal battery (values in %)
4284 #START_CHARGE_THRESH_BAT0=75
4285 #STOP_CHARGE_THRESH_BAT0=80
4286 # Ultrabay / Slice / Replaceable battery (values in %)
4287 #START_CHARGE_THRESH_BAT1=75
4288 #STOP_CHARGE_THRESH_BAT1=80
4289
4290 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4291 #RESTORE_THRESHOLDS_ON_BAT=1
4292
4293 # ------------------------------------------------------------------------------
4294 # tlp-rdw - Parameters for the radio device wizard
4295 # Possible devices: bluetooth, wifi, wwan.
4296
4297 # Hints:
4298 # - Parameters are disabled by default, remove the leading # to enable them
4299 # - Separate multiple radio devices with spaces
4300
4301 # Radio devices to disable on connect.
4302 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4303 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4304 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4305
4306 # Radio devices to enable on disconnect.
4307 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4308 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4309 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4310
4311 # Radio devices to enable/disable when docked.
4312 #DEVICES_TO_ENABLE_ON_DOCK=""
4313 #DEVICES_TO_DISABLE_ON_DOCK=""
4314
4315 # Radio devices to enable/disable when undocked.
4316 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4317 #DEVICES_TO_DISABLE_ON_UNDOCK=""
4318 #+end_src
4319
4320 ** X
4321
4322 *** xprofile
4323 :PROPERTIES:
4324 :header-args+: :tangle ~/.xprofile
4325 :END:
4326
4327 =~/.xprofile= is similar in style to =~/.xinitrc=, but on the
4328 contrary, it's automatically sourced by LightDM, my display manager of
4329 choice.
4330
4331 #+begin_src sh :tangle no
4332 xset -b  # disable bell
4333 xset r rate 200 45  # repeat delay (ms) and rate (repeats/sec)
4334
4335 # setxkbmap -option compose:ralt
4336
4337 setxkbmap -option ctrl:nocaps          # turn capslock into control
4338 setxkbmap -option altwin:swap_alt_win  # swap alt and super
4339
4340 if [ $(hostname) = "plasma" ]
4341 then
4342     setxkbmap -option ctrl:rctrl_ralt  # turn right control into right alt
4343 fi
4344
4345 if [ $(hostname) = "enigma" ]
4346 then
4347     xmodmap -e "keycode 135 = Alt_R"  # remap menu key to alt
4348 fi
4349
4350 light -Scrs "intel_backlight" 2
4351
4352 source $HOME/.zprofile
4353
4354 export _JAVA_AWT_WM_NONREPARENTING=1
4355 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4356
4357 if [ $(hostname) = "plasma" ]
4358 then
4359     unlock-def-gk.py &
4360 fi
4361
4362 bspwm &
4363 #+end_src
4364
4365 *** X resources
4366
4367 **** Xresources
4368 :PROPERTIES:
4369 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
4370 :END:
4371
4372 #+begin_src conf-xdefaults
4373 #include ".Xresources.d/fonts"
4374 ! #include ".Xresources.d/colors"
4375 #include ".Xresources.d/emacs"
4376 #include ".Xresources.d/rxvt-unicode"
4377 #+end_src
4378
4379 **** Xresources.d
4380
4381 ***** fonts
4382 :PROPERTIES:
4383 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
4384 :END:
4385
4386 #+begin_src conf-xdefaults
4387 Xft.lcdfilter: lcddefault
4388 Xft.antialias: true
4389 Xft.autohint: 0
4390 Xft.hinting: true
4391 Xft.hintstyle: hintslight
4392 ! Xft.hintstyle: hintfull
4393 Xft.rgba: rgb
4394 Xft.dpi: 96
4395 #+end_src
4396
4397 ***** colors
4398 :PROPERTIES:
4399 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
4400 :END:
4401
4402 #+begin_src conf-xdefaults :tangle no
4403 #include "gruvbox-light.xresources"
4404 ! #include "gruvbox-dark.xresources"
4405 #include "gruvbox-urxvt256.xresources"
4406 #+end_src
4407
4408 #+begin_src conf-xdefaults :tangle no
4409 ! -----------------------------------------------------------------------------
4410 ! File: gruvbox-light.xresources
4411 ! Description: Retro groove colorscheme generalized
4412 ! Author: morhetz <morhetz@gmail.com>
4413 ! Source: https://github.com/morhetz/gruvbox-generalized
4414 ! Last Modified: 6 Sep 2014
4415 ! -----------------------------------------------------------------------------
4416
4417 ! hard contrast: *background: #f9f5d7
4418 *background: #fbf1c7
4419 ! soft contrast: *background: #f2e5bc
4420 *foreground: #3c3836
4421 ! Black + DarkGrey
4422 *color0:  #fdf4c1
4423 *color8:  #928374
4424 ! DarkRed + Red
4425 *color1:  #cc241d
4426 *color9:  #9d0006
4427 ! DarkGreen + Green
4428 *color2:  #98971a
4429 *color10: #79740e
4430 ! DarkYellow + Yellow
4431 *color3:  #d79921
4432 *color11: #b57614
4433 ! DarkBlue + Blue
4434 *color4:  #458588
4435 *color12: #076678
4436 ! DarkMagenta + Magenta
4437 *color5:  #b16286
4438 *color13: #8f3f71
4439 ! DarkCyan + Cyan
4440 *color6:  #689d6a
4441 *color14: #427b58
4442 ! LightGrey + White
4443 *color7:  #7c6f64
4444 *color15: #3c3836
4445 #+end_src
4446
4447 #+begin_src conf-xdefaults :tangle no
4448 ! -----------------------------------------------------------------------------
4449 ! File: gruvbox-dark.xresources
4450 ! Description: Retro groove colorscheme generalized
4451 ! Author: morhetz <morhetz@gmail.com>
4452 ! Source: https://github.com/morhetz/gruvbox-generalized
4453 ! Last Modified: 6 Sep 2014
4454 ! -----------------------------------------------------------------------------
4455
4456 ! hard contrast: *background: #1d2021
4457 *background: #282828
4458 ! soft contrast: *background: #32302f
4459 *foreground: #ebdbb2
4460 ! Black + DarkGrey
4461 *color0:  #282828
4462 *color8:  #928374
4463 ! DarkRed + Red
4464 *color1:  #cc241d
4465 *color9:  #fb4934
4466 ! DarkGreen + Green
4467 *color2:  #98971a
4468 *color10: #b8bb26
4469 ! DarkYellow + Yellow
4470 *color3:  #d79921
4471 *color11: #fabd2f
4472 ! DarkBlue + Blue
4473 *color4:  #458588
4474 *color12: #83a598
4475 ! DarkMagenta + Magenta
4476 *color5:  #b16286
4477 *color13: #d3869b
4478 ! DarkCyan + Cyan
4479 *color6:  #689d6a
4480 *color14: #8ec07c
4481 ! LightGrey + White
4482 *color7:  #a89984
4483 *color15: #ebdbb2
4484 #+end_src
4485
4486 #+begin_src conf-xdefaults :tangle no
4487 ! -----------------------------------------------------------------------------
4488 ! File: gruvbox-urxvt256.xresources
4489 ! Description: Retro groove colorscheme generalized
4490 ! Author: morhetz <morhetz@gmail.com>
4491 ! Source: https://github.com/morhetz/gruvbox-generalized
4492 ! Last Modified: 13 Dec 2013
4493 ! -----------------------------------------------------------------------------
4494
4495 URxvt.color24:  #076678
4496 URxvt.color66:  #427b58
4497 URxvt.color88:  #9d0006
4498 URxvt.color96:  #8f3f71
4499 URxvt.color100: #79740e
4500 URxvt.color108: #8ec07c
4501 URxvt.color109: #83a598
4502 URxvt.color130: #af3a03
4503 URxvt.color136: #b57614
4504 URxvt.color142: #b8bb26
4505 URxvt.color167: #fb4934
4506 URxvt.color175: #d3869b
4507 URxvt.color208: #fe8019
4508 URxvt.color214: #fabd2f
4509 URxvt.color223: #ebdbb2
4510 URxvt.color228: #f2e5bc
4511 URxvt.color229: #fbf1c7
4512 URxvt.color230: #f9f5d7
4513 URxvt.color234: #1d2021
4514 URxvt.color235: #282828
4515 URxvt.color236: #32302f
4516 URxvt.color237: #3c3836
4517 URxvt.color239: #504945
4518 URxvt.color241: #665c54
4519 URxvt.color243: #7c6f64
4520 URxvt.color244: #928374
4521 URxvt.color245: #928374
4522 URxvt.color246: #a89984
4523 URxvt.color248: #bdae93
4524 URxvt.color250: #d5c4a1
4525 #+end_src
4526
4527 ***** emacs
4528 :PROPERTIES:
4529 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
4530 :END:
4531
4532 #+begin_src conf-xdefaults
4533 Emacs.menuBar: off
4534 Emacs.toolBar: off
4535 Emacs.verticalScrollBars: off
4536 Emacs.cursorBlink: off
4537 Emacs.FontBackend: xft,x
4538 ! Emacs.font: Ubuntu Mono-12
4539 ! Emacs.font: Triplicate T4C-11
4540 ! Emacs.font: Ubuntu Mono-10.5
4541 ! Emacs.font: Ubuntu Mono-12
4542 ! Emacs.font: Iosevka-11
4543
4544 ! Emacs.font: Fira Mono:size=15
4545 ! Emacs.font: DejaVu Sans Mono:size=15
4546 ! Emacs.font: Inconsolata:size=17
4547 ! Emacs.font: Inconsolata:size=16
4548 ! Emacs.font: Inconsolata LGC:size=14
4549 ! Emacs.font: Source Code Pro Medium-10.5
4550 Emacs.font: Ubuntu Mono:size=16
4551 ! Emacs.font: Iosevka:size=16
4552 #+end_src
4553
4554 ***** rxvt-unicode
4555 :PROPERTIES:
4556 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
4557 :END:
4558
4559 #+begin_src conf-xdefaults
4560 ! Font
4561 URxvt.font:             xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
4562 URxvt.boldFont:         xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
4563 URxvt.italicFont:       xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
4564 URxvt.bolditalicFont:   xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
4565
4566 URxvt.xftAntialias:     true
4567 URxvt.letterSpace:      0
4568
4569 URxvt.depth:                0
4570 URxvt.loginShell:           true
4571 URxvt.saveLines:            100000
4572 URxvt.internalBorder:       3
4573 URxvt.lineSpace:            0
4574 URxvt.scrollBar:            false
4575 URxvt.scrollStyle:          rxvt
4576 URxvt*scrollTtyOutput:      false
4577 URxvt*scrollWithBuffer:     true
4578 URxvt*scrollTtyKeypress:    true
4579 URxvt.keysym.Shift-Up:      command:\033]720;1\007
4580 URxvt.keysym.Shift-Down:    command:\033]721;1\007
4581
4582 URxvt.perl-ext-common:      default,clipboard,url-select,keyboard-select
4583 URxvt.perl-ext:             bidi
4584 URxvt.bidi.enabled:         1
4585 URxvt.url-select.launcher:  firefox
4586 URxvt.url-select.underline: true
4587 URxvt.keysym.M-u:           perl:url-select:select_next
4588 URxvt.keysym.M-Escape:      perl:keyboard-select:activate
4589 URxvt.keysym.M-s:           perl:keyboard-select:search
4590 URxvt.url-launcher:         /usr/bin/firefox
4591 URxvt.matcher.button:       1
4592 URxvt.iso14755:             false
4593 URxvt.iso14755_53:          false
4594 URxvt.keysym.M-c:           perl:clipboard:copy
4595 URxvt.keysym.M-v:           perl:clipboard:paste
4596 URxvt.keysym.C-A-V:         perl:clipboard:paste_escaped
4597 URxvt.keysym.C-Up:          font-size:increase
4598 URxvt.keysym.C-Down:        font-size:decrease
4599 URxvt.keysym.C-S-Up:        font-size:incglobal
4600 URxvt.keysym.C-S-Down:      font-size:decglobal
4601 URxvt.keysym.C-equal:       font-size:reset
4602 !URxvt.keysym.C-question:   font-size:show
4603
4604 URxvt.iconFile:             /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
4605
4606 !urxvt*foreground: white
4607 !urxvt*background: black
4608
4609 !*color0:  #2E3436
4610 !*color1:  #a40000
4611 !*color2:  #4E9A06
4612 !*color3:  #C4A000
4613 !*color4:  #3465A4
4614 !*color5:  #75507B
4615 !*color6:  #ce5c00
4616 !*color7:  #babdb9
4617 !*color8:  #555753
4618 !*color9:  #EF2929
4619 !*color10: #8AE234
4620 !*color11: #FCE94F
4621 !*color12: #729FCF
4622 !*color13: #AD7FA8
4623 !*color14: #fcaf3e
4624 !*color15: #EEEEEC
4625
4626 !URxvt.foreground: #C8C8C8
4627 !URxvt.background: #FFFFFF
4628
4629 !! black
4630 !*color0:  #2E3436
4631 !*color8:  #555753
4632 !! red
4633 !*color1:  #a40000
4634 !*color9:  #EF2929
4635 !! green
4636 !*color2:  #4E9A06
4637 !*color10: #8AE234
4638 !! yellow
4639 !*color3:  #C4A000
4640 !*color11: #FCE94F
4641 !! blue
4642 !*color4:  #3465A4
4643 !*color12: #729FCF
4644 !! purple
4645 !*color5:  #75507B
4646 !*color13: #AD7FA8
4647 !! orange (replaces cyan)
4648 !*color6:  #ce5c00
4649 !*color14: #fcaf3e
4650 !! white
4651 !*color7:  #babdb9
4652 !*color15: #EEEEEC
4653
4654 ! Tango colour theme for rxvt-unicode
4655 URxvt.background: #FFFFFF
4656 URxvt.foreground: #000000
4657
4658 ! Black
4659 URxvt.color0: #2E3436
4660 URxvt.color8: #757773
4661
4662 ! Red
4663 URxvt.color1: #CC0000
4664 URxvt.color9: #EF2929
4665
4666 ! Green
4667 URxvt.color2: #4E9A06
4668 URxvt.color10: #8AE234
4669
4670 ! Yellow
4671 URxvt.color3: #C4A000
4672 URxvt.color11: #FCE94F
4673
4674 ! Blue
4675 URxvt.color4: #3465A4
4676 URxvt.color12: #729FCF
4677
4678 ! Magenta
4679 URxvt.color5: #75507B
4680 URxvt.color13: #AD7FA8
4681
4682 !! Cyan
4683 !URxvt.color6: #06989A
4684 !URxvt.color14: #34E2E2
4685 ! orange (replaces cyan)
4686 *color6:  #ce5c00
4687 *color14: #fcaf3e
4688
4689 ! White
4690 URxvt.color7: #D3D7CF
4691 URxvt.color15: #EEEEEC
4692 #+end_src
4693
4694 ** XDG
4695 :PROPERTIES:
4696 :header-args+: :tangle ~/.config/user-dirs.dirs
4697 :END:
4698
4699 #+begin_src conf
4700 XDG_DESKTOP_DIR="$HOME/Desktop"
4701 XDG_DOCUMENTS_DIR="$HOME/usr/docs"
4702 XDG_DOWNLOAD_DIR="$HOME/usr/dls"
4703 XDG_MUSIC_DIR="$HOME/usr/music"
4704 XDG_PICTURES_DIR="$HOME/usr/pics"
4705 XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
4706 XDG_TEMPLATES_DIR="$HOME/usr/Templates"
4707 XDG_VIDEOS_DIR="$HOME/usr/vids"
4708 #+end_src
4709
4710 ** Zathura
4711 :PROPERTIES:
4712 :header-args+: :tangle ~/.config/zathura/zathurarc
4713 :END:
4714
4715 #+begin_src conf
4716 set smooth-scroll true
4717 set selection-clipboard clipboard
4718 set zoom-step 05
4719 set default-bg "#272727"
4720 set statusbar-bg "#272727"
4721 set inputbar-bg "#373737"
4722 #+end_src
4723
4724 ** Zsh
4725
4726 My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
4727 [[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
4728 installed.
4729
4730 *** zimrc
4731 :PROPERTIES:
4732 :header-args+: :tangle ~/.zimrc
4733 :END:
4734
4735 #+begin_src sh
4736
4737
4738 #################
4739 # CORE SETTINGS #
4740 #################
4741
4742 #
4743 # Zim settings
4744 #
4745
4746 # Select what modules you would like enabled.
4747 # The second line of modules may depend on options set by modules in the first
4748 # line. These dependencies are noted on the respective module's README.md.
4749 zmodules=(directory environment git git-info history input ssh utility custom \
4750           syntax-highlighting history-substring-search prompt completion)
4751
4752
4753 ###################
4754 # MODULE SETTINGS #
4755 ###################
4756
4757 #
4758 # Prompt
4759 #
4760
4761 # Set your desired prompt here
4762 zprompt_theme='pure'
4763 #PURE_PROMPT_SYMBOL=λ
4764 #PURE_PROMPT_SYMBOL=δ
4765 PURE_PROMPT_SYMBOL=➜
4766
4767 #
4768 # Completion
4769 #
4770
4771 # set an optional host-specific filename for the completion cache file
4772 # if none is provided, the default '.zcompdump' is used.
4773 #zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
4774
4775 #
4776 # Utility
4777 #
4778
4779 # Uncomment to enable command correction prompts
4780 # See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
4781 setopt CORRECT
4782
4783 #
4784 # Environment
4785 #
4786
4787 # Set the string below to the desired terminal title format string.
4788 # The terminal title is redrawn upon directory change, however, variables like
4789 # ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
4790 #   http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
4791 # The example below uses the following format: 'username@host:/current/directory'
4792 ztermtitle='%n@%m:%~'
4793
4794 #
4795 # Input
4796 #
4797
4798 # Uncomment to enable double-dot expansion.
4799 # This appends '../' to your input for each '.' you type after an initial '..'
4800 #zdouble_dot_expand='true'
4801
4802 #
4803 # Syntax-Highlighting
4804 #
4805
4806 # This determines what highlighters will be used with the syntax-highlighting module.
4807 # Documentation of the highlighters can be found here:
4808 #   https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
4809 # For (u)rxvt, termite and gnome-terminal users,
4810 # removing the 'cursor' highlighter will fix the disappearing cursor problem
4811 #zhighlighters=(main brackets cursor)
4812 zhighlighters=(main brackets pattern)
4813
4814
4815 #
4816 # SSH
4817 #
4818
4819 # Load these ssh identities with the ssh module
4820 zssh_ids=(id_ed25519_amin)
4821
4822
4823 #
4824 # Pacman
4825 #
4826
4827 # Set (optional) pacman front-end.
4828 zpacman_frontend='yay'
4829
4830 # Load any helper scripts as defined here
4831 #zpacman_helper=(aur)
4832 #+end_src
4833
4834 *** zlogin
4835 :PROPERTIES:
4836 :header-args+: :tangle ~/.zlogin
4837 :END:
4838
4839 #+begin_src sh
4840
4841
4842 #
4843 # User configuration sourced by login shells
4844 #
4845
4846 # Initialize zim
4847 [[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
4848 #+end_src
4849
4850 *** zprofile
4851 :PROPERTIES:
4852 :header-args+: :tangle ~/.zprofile
4853 :END:
4854
4855 #+begin_src sh
4856 #PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
4857 #PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
4858 export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
4859 export XDG_CONFIG_HOME=$HOME/.config
4860 export XDG_DATA_HOME=$HOME/.local/share
4861 export XDG_DATA_DIRS=/usr/local/share:/usr/share
4862 export MAILDIR="$HOME/mail"
4863 export CVS_RSH=ssh
4864 #export MATHMODELS=$HOME/src/eiffel/mathmodels
4865 #export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
4866 #export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
4867
4868 # Eiffel2Java stuff
4869 #export JAVA_HOME=/usr/lib/jvm/default
4870 #export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
4871 #export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4872 #export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4873
4874 #export PATH="$HOME/usr/build/pvs:$PATH"
4875 #export SBCLISP_HOME=/usr/share/sbcl-source
4876 #export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
4877
4878 export MOZ_USE_XINPUT2=1  # precise scrolling in firefox
4879
4880 #export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
4881 #export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
4882
4883 if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
4884 #+end_src
4885
4886 *** zshenv
4887 :PROPERTIES:
4888 :header-args+: :tangle ~/.zshenv
4889 :END:
4890
4891 #+begin_src sh
4892 # Ensure that a non-login, non-interactive shell has a defined environment.
4893 if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
4894   source "${ZDOTDIR:-$HOME}/.zprofile"
4895 fi
4896 #+end_src
4897
4898 *** zshrc
4899 :PROPERTIES:
4900 :header-args+: :tangle ~/.zshrc
4901 :END:
4902
4903 #+begin_src sh
4904 # Bash-like navigation
4905 #export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
4906 #export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
4907 export WORDCHARS='*?[]~=&;!#$%^(){}<>'
4908 #ZLE_SPACE_SUFFIX_CHARS=$'|&'
4909
4910 #disable -r time       # disable shell reserved word
4911 #alias time='time -p'  # -p for POSIX output
4912
4913 # rehash if last command was pacaur or pacman
4914 # (so that zsh picks up changes in $PATH immediately)
4915 TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
4916
4917 #
4918 # User configuration sourced by interactive shells
4919 #
4920
4921 # Change default zim location
4922 export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
4923
4924 # Start zim
4925 [[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
4926
4927 ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
4928 #ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
4929
4930 setopt globdots
4931
4932 source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
4933 source ~/.zsh/zsh-autopair/autopair.zsh
4934
4935
4936 ### fzf ###
4937
4938 source /usr/share/fzf/key-bindings.zsh
4939 source /usr/share/fzf/completion.zsh
4940
4941 # Accept history selection instead of putting it on
4942 # the command line
4943 fzf-history-widget-accept() {
4944   fzf-history-widget
4945   zle accept-line
4946 }
4947 #zle     -N   fzf-history-widget-accept
4948 #bindkey '^R' fzf-history-widget-accept
4949
4950 # alt+c preview
4951 export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
4952
4953 ### fzf ###
4954
4955
4956 # aliases
4957 alias mpv="mpv --ytdl-format mp4"
4958 alias mv="mv -iv"
4959 alias cp="cp -iv"
4960 alias scl=systemctl
4961 alias jcl=journalctl
4962 alias m="mbsync -Va; getmail; notmuch new"
4963 alias best="youtube-dl -f best"
4964 alias nixx="ssh amin@nix.aminb.org"
4965 alias fence="ssh aminb@fencepost.gnu.org"
4966
4967 aur() {
4968    cd ~/usr/build
4969    git clone https://aur.archlinux.org/${1}.git
4970    cd ${1}
4971 }
4972
4973 # i-beam cursor
4974 echo -e "\033[5 q"
4975 #echo -e "\033[6 q"
4976 #+end_src
4977
4978 * Scripts
4979
4980 This section contains various useful scripts and the ones used by the
4981 programs above. For instance, =toggle-tablet= for switching to and
4982 from tablet mode on my X220T, =toggle-presentation-mode= for toggling
4983 Xfce's presentation mode which keeps the screen awake, and
4984 =rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
4985 exact brightness value.
4986
4987 ** battery-percentage-time
4988 :PROPERTIES:
4989 :header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/sh"
4990 :END:
4991
4992 #+begin_src sh :tangle no
4993 dbus_send() {
4994         label=$1
4995         dbus-send --print-reply=literal --system \
4996                 --dest=org.freedesktop.UPower \
4997                 /org/freedesktop/UPower/devices/battery_BAT0 \
4998                 org.freedesktop.DBus.Properties.Get \
4999                 string:org.freedesktop.UPower.Device \
5000                 string:"${label}" | awk '{print $3}'
5001 }
5002
5003 perc=$(dbus_send 'Percentage')
5004 state=$(dbus_send 'State')
5005
5006 if [ "$state" -eq 2 ]; then  # Discharging
5007         secs=$(dbus_send 'TimeToEmpty')
5008 elif [ "$state" -eq 1 ]; then  # Charging
5009         secs=$(dbus_send 'TimeToFull')
5010 fi
5011
5012 printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60))
5013 #+end_src
5014
5015 ** rofi-light
5016 :PROPERTIES:
5017 :header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
5018 :END:
5019
5020 #+begin_src bash
5021 cur=$(light -G)
5022 val=$(rofi -dmenu -mesg "light    $cur" -p "light -S " -l 0 -width 12)
5023 light -S $val
5024 #+end_src
5025
5026 ** s (run sway)
5027 :PROPERTIES:
5028 :header-args+: :tangle ~/.local/bin/s :shebang "#!/bin/bash"
5029 :END:
5030
5031 #+begin_src bash
5032 export _JAVA_AWT_WM_NONREPARENTING=1
5033 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
5034 light -Scrs "intel_backlight" 2
5035 source $HOME/.zprofile
5036 sway
5037 #+end_src
5038
5039 ** sway-ws-util
5040 :PROPERTIES:
5041 :header-args+: :tangle ~/.local/bin/sway-ws-util :shebang "#!/bin/bash"
5042 :END:
5043
5044 #+begin_src bash
5045 curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name')
5046 [[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1))
5047 [[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1))
5048 dest_ws=-1
5049 op=-1
5050
5051 if [ "$1" = "switch" ] || [ "$1" = "move" ]; then
5052   op="$1"
5053   if [ "$2" = "prev" ]; then
5054     dest_ws="$prev_ws"
5055   elif [ "$2" = "next" ]; then
5056     dest_ws="$next_ws"
5057   else
5058     echo "Usage: $0 $1 {prev|next} [follow]"
5059     exit 1
5060   fi
5061 else
5062   echo "Usage: $0 {switch|move} {prev|next} [follow]"
5063   exit 1
5064 fi
5065
5066 if [ "$op" = "switch" ]; then
5067   sway workspace "$dest_ws"
5068 elif [ "$op" = "move" ]; then
5069   sway move container to workspace "$dest_ws"
5070   if [ "$3" = "follow" ]; then
5071     sway workspace "$dest_ws"
5072   fi
5073 fi
5074 #+end_src
5075
5076 ** toggle-layout
5077 :PROPERTIES:
5078 :header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
5079 :END:
5080
5081 #+begin_src bash :tangle no
5082 lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
5083
5084 if [ "$lang" = "us" ]; then
5085     setxkbmap ir
5086 else
5087     setxkbmap us
5088     # xmodmap $HOME/.Xmodmap
5089 fi
5090 #+end_src
5091
5092 ** toggle-presentation-mode
5093 :PROPERTIES:
5094 :header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
5095 :END:
5096
5097 #+begin_src bash :tangle no
5098 xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
5099 #+end_src
5100
5101 ** toggle-tablet
5102 :PROPERTIES:
5103 :header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
5104 :END:
5105
5106 This script toggles between a 'normal' mode and a 'tablet' mode, doing
5107 a few things:
5108
5109 - rotates the screen using =xrandr=, so that rotating the physical
5110   display of my X220t would have the laptop's battery on the right
5111   hand side,
5112 - enables touch screen,
5113 - properly rotates the stylus pen and touch screen pointers, and
5114 - toggles between RGB and Vertical BGR sub-pixel order.
5115
5116 #+begin_src bash :tangle no
5117 case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
5118     0)  # Screen is not rotated, we should rotate it right (90°)
5119            xrandr -o 3
5120            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
5121            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
5122            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
5123            xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
5124            ;;
5125     1)  # Currently top is rotated right, we should set it normal (0°)
5126           xrandr -o 0
5127           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
5128           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
5129           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
5130           xfconf-query -c xsettings -p /Xft/RGBA -s rgb
5131           ;;
5132     *)
5133            echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
5134            exit 1
5135            ;;
5136 esac
5137 #+end_src
5138
5139 ** unlock-def-gk.py
5140 :PROPERTIES:
5141 :header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
5142 :END:
5143
5144 #+begin_src python :tangle no
5145 import gnomekeyring as gk
5146 # list_item_ids_sync('login')[0] == 1L
5147 gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
5148 #+end_src
5149
5150 ** volume-info
5151 :PROPERTIES:
5152 :header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh"
5153 :END:
5154
5155 #+begin_src sh :tangle no
5156 cur_vol=$(pamixer --get-volume)
5157
5158 if [ $(pamixer --get-mute) = true ]; then
5159   printf 'mt \n' "$cur_vol"
5160 else
5161   printf '%02d \n' "$cur_vol"
5162 fi
5163 #+end_src
5164
5165 ** wp
5166
5167 My little wallpaper changer script.
5168
5169 *** wp
5170 :PROPERTIES:
5171 :header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
5172 :END:
5173
5174 #+begin_src bash :tangle no
5175 export DISPLAY=:0
5176
5177 case "$1" in
5178   "day")
5179     feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5180     ;;
5181   "night")
5182     feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5183     ;;
5184   *)
5185     echo $"Usage: $0 {day|night}"
5186     exit 1
5187 esac
5188 #+end_src
5189
5190 *** wp-auto
5191 :PROPERTIES:
5192 :header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
5193 :END:
5194
5195 #+begin_src bash :tangle no
5196 SED=$(which sed)
5197 ROFI=$(which rofi)
5198
5199 export DISPLAY=:0
5200 HOUR=$(date +%H)
5201
5202 if [ -z "${SED}" ]
5203 then
5204     echo "Did not find 'sed', script cannot continue."
5205     exit 1
5206 fi
5207 if [ -z "${ROFI}" ]
5208 then
5209     echo "Did not find rofi, there is no point to continue."
5210     exit 1
5211 fi
5212
5213 ###
5214 # Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
5215 # Repeated calls should leave the config clean-ish
5216 ###
5217 function set_theme()
5218 {
5219     CDIR="${HOME}/.config/rofi/"
5220     if [ ! -d "${CDIR}" ]
5221     then
5222         mkdir -p ${CDIR}
5223     fi
5224     if [ -f "${CDIR}/config" ]
5225     then
5226         ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
5227     fi
5228     echo "rofi.theme: ${1}" >> "${CDIR}/config"
5229
5230 }
5231
5232 if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
5233     then
5234         feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5235         xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
5236         set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
5237     else
5238         feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5239         xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
5240         set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
5241 fi
5242 #+end_src
5243
5244 *** wp.service
5245 :PROPERTIES:
5246 :header-args+: :tangle ~/.config/systemd/user/wp.service
5247 :END:
5248
5249 #+begin_src conf :tangle no
5250 [Unit]
5251 Description=wallpaper service
5252
5253 [Service]
5254 Type=oneshot
5255 ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
5256 #+end_src
5257
5258 *** wp.timer
5259 :PROPERTIES:
5260 :header-args+: :tangle ~/.config/systemd/user/wp.timer
5261 :END:
5262
5263 #+begin_src conf :tangle no
5264 [Unit]
5265 [Unit]
5266 Description=wallpaper timer
5267
5268 [Timer]
5269 OnCalendar=07,21:00
5270 Unit=wp.service
5271 Persistent=true
5272
5273 [Install]
5274 WantedBy=timers.target
5275 #+end_src
5276
5277 ** zathura-sync.sh
5278 :PROPERTIES:
5279 :header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
5280 :END:
5281
5282 #+begin_src sh
5283 pos="$1"
5284 pdffile="$2"
5285 zathura --synctex-forward "$pos" "$pdffile" || \
5286     (
5287     zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
5288     sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
5289 #+end_src
5290 ** Fun :)
5291
5292 *** eat-em
5293 :PROPERTIES:
5294 :header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
5295 :END:
5296
5297 #+begin_src sh
5298 # Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5299 # [ESC] character in original post removed here.
5300
5301 # ANSI Color -- use these variables to easily have different color
5302 #    and format output. Make sure to output the reset sequence after
5303 #    colors (f = foreground, b = background), and use the 'off'
5304 #    feature for anything you turn on.
5305
5306 initializeANSI()
5307 {
5308  esc="$(echo -en '\e')"
5309
5310   blackf="${esc}[30m";   redf="${esc}[31m";    greenf="${esc}[32m"
5311   yellowf="${esc}[33m"   bluef="${esc}[34m";   purplef="${esc}[35m"
5312   cyanf="${esc}[36m";    whitef="${esc}[37m"
5313
5314   blackb="${esc}[40m";   redb="${esc}[41m";    greenb="${esc}[42m"
5315   yellowb="${esc}[43m"   blueb="${esc}[44m";   purpleb="${esc}[45m"
5316   cyanb="${esc}[46m";    whiteb="${esc}[47m"
5317
5318   boldon="${esc}[1m";    boldoff="${esc}[22m"
5319   italicson="${esc}[3m"; italicsoff="${esc}[23m"
5320   ulon="${esc}[4m";      uloff="${esc}[24m"
5321   invon="${esc}[7m";     invoff="${esc}[27m"
5322
5323   reset="${esc}[0m"
5324 }
5325
5326 # note in this first use that switching colors doesn't require a reset
5327 # first - the new color overrides the old one.
5328
5329 #clear
5330
5331 initializeANSI
5332
5333 cat << EOF
5334
5335  ${yellowf}  ▄███████▄${reset}   ${redf}  ▄██████▄${reset}    ${greenf}  ▄██████▄${reset}    ${bluef}  ▄██████▄${reset}    ${purplef}  ▄██████▄${reset}    ${cyanf}  ▄██████▄${reset}
5336  ${yellowf}▄█████████▀▀${reset}  ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset}  ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset}  ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset}  ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset}  ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5337  ${yellowf}███████▀${reset}      ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset}  ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset}  ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset}  ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset}  ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5338  ${yellowf}███████▄${reset}      ${redf}████████████${reset}  ${greenf}████████████${reset}  ${bluef}████████████${reset}  ${purplef}████████████${reset}  ${cyanf}████████████${reset}
5339  ${yellowf}▀█████████▄▄${reset}  ${redf}██▀██▀▀██▀██${reset}  ${greenf}██▀██▀▀██▀██${reset}  ${bluef}██▀██▀▀██▀██${reset}  ${purplef}██▀██▀▀██▀██${reset}  ${cyanf}██▀██▀▀██▀██${reset}
5340  ${yellowf}  ▀███████▀${reset}   ${redf}▀   ▀  ▀   ▀${reset}  ${greenf}▀   ▀  ▀   ▀${reset}  ${bluef}▀   ▀  ▀   ▀${reset}  ${purplef}▀   ▀  ▀   ▀${reset}  ${cyanf}▀   ▀  ▀   ▀${reset}
5341
5342  ${boldon}${yellowf}  ▄███████▄   ${redf}  ▄██████▄    ${greenf}  ▄██████▄    ${bluef}  ▄██████▄    ${purplef}  ▄██████▄    ${cyanf}  ▄██████▄${reset}
5343  ${boldon}${yellowf}▄█████████▀▀  ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄  ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄  ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄  ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄  ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5344  ${boldon}${yellowf}███████▀      ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███  ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███  ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███  ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███  ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5345  ${boldon}${yellowf}███████▄      ${redf}████████████  ${greenf}████████████  ${bluef}████████████  ${purplef}████████████  ${cyanf}████████████${reset}
5346  ${boldon}${yellowf}▀█████████▄▄  ${redf}██▀██▀▀██▀██  ${greenf}██▀██▀▀██▀██  ${bluef}██▀██▀▀██▀██  ${purplef}██▀██▀▀██▀██  ${cyanf}██▀██▀▀██▀██${reset}
5347  ${boldon}${yellowf}  ▀███████▀   ${redf}▀   ▀  ▀   ▀  ${greenf}▀   ▀  ▀   ▀  ${bluef}▀   ▀  ▀   ▀  ${purplef}▀   ▀  ▀   ▀  ${cyanf}▀   ▀  ▀   ▀${reset}
5348
5349 EOF
5350 #+end_src
5351
5352 *** invade-em
5353 :PROPERTIES:
5354 :header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
5355 :END:
5356
5357 #+begin_src bash
5358 #
5359 # ANSI color scheme script featuring Space Invaders
5360 #
5361 # Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5362 # Modified by lolilolicon
5363 #
5364
5365 f=3 b=4
5366 for j in f b; do
5367   for i in {0..7}; do
5368     printf -v $j$i %b "\e[${!j}${i}m"
5369   done
5370 done
5371 bld=$'\e[1m'
5372 rst=$'\e[0m'
5373
5374 cat << EOF
5375
5376  $f1  ▀▄   ▄▀     $f2 ▄▄▄████▄▄▄    $f3  ▄██▄     $f4  ▀▄   ▄▀     $f5 ▄▄▄████▄▄▄    $f6  ▄██▄  $rst
5377  $f1 ▄█▀███▀█▄    $f2███▀▀██▀▀███   $f3▄█▀██▀█▄   $f4 ▄█▀███▀█▄    $f5███▀▀██▀▀███   $f6▄█▀██▀█▄$rst
5378  $f1█▀███████▀█   $f2▀▀███▀▀███▀▀   $f3▀█▀██▀█▀   $f4█▀███████▀█   $f5▀▀███▀▀███▀▀   $f6▀█▀██▀█▀$rst
5379  $f1▀ ▀▄▄ ▄▄▀ ▀   $f2 ▀█▄ ▀▀ ▄█▀    $f3▀▄    ▄▀   $f4▀ ▀▄▄ ▄▄▀ ▀   $f5 ▀█▄ ▀▀ ▄█▀    $f6▀▄    ▄▀$rst
5380
5381  $bld$f1▄ ▀▄   ▄▀ ▄   $f2 ▄▄▄████▄▄▄    $f3  ▄██▄     $f4▄ ▀▄   ▄▀ ▄   $f5 ▄▄▄████▄▄▄    $f6  ▄██▄  $rst
5382  $bld$f1█▄█▀███▀█▄█   $f2███▀▀██▀▀███   $f3▄█▀██▀█▄   $f4█▄█▀███▀█▄█   $f5███▀▀██▀▀███   $f6▄█▀██▀█▄$rst
5383  $bld$f1▀█████████▀   $f2▀▀▀██▀▀██▀▀▀   $f3▀▀█▀▀█▀▀   $f4▀█████████▀   $f5▀▀▀██▀▀██▀▀▀   $f6▀▀█▀▀█▀▀$rst
5384  $bld$f1 ▄▀     ▀▄    $f2▄▄▀▀ ▀▀ ▀▀▄▄   $f3▄▀▄▀▀▄▀▄   $f4 ▄▀     ▀▄    $f5▄▄▀▀ ▀▀ ▀▀▄▄   $f6▄▀▄▀▀▄▀▄$rst
5385
5386
5387                                      $f7▌$rst
5388
5389                                    $f7▌$rst
5390
5391                               $f7    ▄█▄    $rst
5392                               $f7▄█████████▄$rst
5393                               $f7▀▀▀▀▀▀▀▀▀▀▀$rst
5394
5395 EOF
5396 #+end_src