--- /dev/null
+# An example configuration file for MPD.
+# Read the user manual for documentation: http://www.musicpd.org/doc/user/
+
+
+# Files and directories #######################################################
+#
+# This setting controls the top directory which MPD will search to discover the
+# available audio files and add them to the daemon's online database. This
+# setting defaults to the XDG directory, otherwise the music directory will be
+# be disabled and audio files will only be accepted over ipc socket (using
+# file:// protocol) or streaming files over an accepted protocol.
+#
+music_directory "~/usr/music"
+#
+# This setting sets the MPD internal playlist directory. The purpose of this
+# directory is storage for playlists created by MPD. The server will use
+# playlist files not created by the server but only if they are in the MPD
+# format. This setting defaults to playlist saving being disabled.
+#
+playlist_directory "~/.mpd/playlists"
+#
+# This setting sets the location of the MPD database. This file is used to
+# load the database at server start up and store the database while the
+# server is not up. This setting defaults to disabled which will allow
+# MPD to accept files over ipc socket (using file:// protocol) or streaming
+# files over an accepted protocol.
+#
+db_file "~/.mpd/database"
+#
+# These settings are the locations for the daemon log files for the daemon.
+# These logs are great for troubleshooting, depending on your log_level
+# settings.
+#
+# The special value "syslog" makes MPD use the local syslog daemon. This
+# setting defaults to logging to syslog, otherwise logging is disabled.
+#
+log_file "~/.mpd/log"
+#
+# This setting sets the location of the file which stores the process ID
+# for use of mpd --kill and some init scripts. This setting is disabled by
+# default and the pid file will not be stored.
+#
+pid_file "~/.mpd/pid"
+#
+# This setting sets the location of the file which contains information about
+# most variables to get MPD back into the same general shape it was in before
+# it was brought down. This setting is disabled by default and the server
+# state will be reset on server start up.
+#
+state_file "~/.mpd/state"
+#
+# The location of the sticker database. This is a database which
+# manages dynamic information attached to songs.
+#
+sticker_file "~/.mpd/sticker.sql"
+#
+###############################################################################
+
+
+# General music daemon options ################################################
+#
+# This setting specifies the user that MPD will run as. MPD should never run as
+# root and you may use this setting to make MPD change its user ID after
+# initialization. This setting is disabled by default and MPD is run as the
+# current user.
+#
+#user "nobody"
+#
+# This setting specifies the group that MPD will run as. If not specified
+# primary group of user specified with "user" setting will be used (if set).
+# This is useful if MPD needs to be a member of group such as "audio" to
+# have permission to use sound card.
+#
+#group "nogroup"
+#
+# This setting sets the address for the daemon to listen on. Careful attention
+# should be paid if this is assigned to anything other then the default, any.
+# This setting can deny access to control of the daemon. Not effective if
+# systemd socket activiation is in use.
+#
+# For network
+#bind_to_address "any"
+#
+# And for Unix Socket
+#bind_to_address "~/.mpd/socket"
+#
+# This setting is the TCP port that is desired for the daemon to get assigned
+# to.
+#
+#port "6600"
+#
+# This setting controls the type of information which is logged. Available
+# setting arguments are "default", "secure" or "verbose". The "verbose" setting
+# argument is recommended for troubleshooting, though can quickly stretch
+# available resources on limited hardware storage.
+#
+#log_level "default"
+#
+# If you have a problem with your MP3s ending abruptly it is recommended that
+# you set this argument to "no" to attempt to fix the problem. If this solves
+# the problem, it is highly recommended to fix the MP3 files with vbrfix
+# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
+# point gapless MP3 playback can be enabled.
+#
+#gapless_mp3_playback "yes"
+#
+# Setting "restore_paused" to "yes" puts MPD into pause mode instead
+# of starting playback after startup.
+#
+#restore_paused "no"
+#
+# This setting enables MPD to create playlists in a format usable by other
+# music players.
+#
+#save_absolute_paths_in_playlists "no"
+#
+# This setting defines a list of tag types that will be extracted during the
+# audio file discovery process. The complete list of possible values can be
+# found in the user manual.
+#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
+#
+# This setting enables automatic update of MPD's database when files in
+# music_directory are changed.
+#
+#auto_update "yes"
+#
+# Limit the depth of the directories being watched, 0 means only watch
+# the music directory itself. There is no limit by default.
+#
+#auto_update_depth "3"
+#
+###############################################################################
+
+
+# Symbolic link behavior ######################################################
+#
+# If this setting is set to "yes", MPD will discover audio files by following
+# symbolic links outside of the configured music_directory.
+#
+#follow_outside_symlinks "yes"
+#
+# If this setting is set to "yes", MPD will discover audio files by following
+# symbolic links inside of the configured music_directory.
+#
+#follow_inside_symlinks "yes"
+#
+###############################################################################
+
+
+# Zeroconf / Avahi Service Discovery ##########################################
+#
+# If this setting is set to "yes", service information will be published with
+# Zeroconf / Avahi.
+#
+#zeroconf_enabled "yes"
+#
+# The argument to this setting will be the Zeroconf / Avahi unique name for
+# this MPD server on the network.
+#
+#zeroconf_name "Music Player"
+#
+###############################################################################
+
+
+# Permissions #################################################################
+#
+# If this setting is set, MPD will require password authorization. The password
+# setting can be specified multiple times for different password profiles.
+#
+#password "password@read,add,control,admin"
+#
+# This setting specifies the permissions a user has who has not yet logged in.
+#
+#default_permissions "read,add,control,admin"
+#
+###############################################################################
+
+
+# Database #######################################################################
+#
+
+#database {
+# plugin "proxy"
+# host "other.mpd.host"
+# port "6600"
+#}
+
+# Input #######################################################################
+#
+
+input {
+ plugin "curl"
+# proxy "proxy.isp.com:8080"
+# proxy_user "user"
+# proxy_password "password"
+}
+
+#
+###############################################################################
+
+# Audio Output ################################################################
+#
+
+audio_output {
+ type "pulse"
+ name "pulse audio"
+}
+
+audio_output {
+ type "fifo"
+ name "my_fifo"
+ path "/tmp/mpd.fifo"
+ format "44100:16:2"
+}
+
+# MPD supports various audio output types, as well as playing through multiple
+# audio outputs at the same time, through multiple audio_output settings
+# blocks. Setting this block is optional, though the server will only attempt
+# autodetection for one sound card.
+#
+# An example of an ALSA output:
+#
+#audio_output {
+# type "alsa"
+# name "My ALSA Device"
+## device "hw:0,0" # optional
+## mixer_type "hardware" # optional
+## mixer_device "default" # optional
+## mixer_control "PCM" # optional
+## mixer_index "0" # optional
+#}
+#
+# An example of an OSS output:
+#
+#audio_output {
+# type "oss"
+# name "My OSS Device"
+## device "/dev/dsp" # optional
+## mixer_type "hardware" # optional
+## mixer_device "/dev/mixer" # optional
+## mixer_control "PCM" # optional
+#}
+#
+# An example of a shout output (for streaming to Icecast):
+#
+#audio_output {
+# type "shout"
+# encoder "vorbis" # optional
+# name "My Shout Stream"
+# host "localhost"
+# port "8000"
+# mount "/mpd.ogg"
+# password "hackme"
+# quality "5.0"
+# bitrate "128"
+# format "44100:16:1"
+## protocol "icecast2" # optional
+## user "source" # optional
+## description "My Stream Description" # optional
+## url "http://example.com" # optional
+## genre "jazz" # optional
+## public "no" # optional
+## timeout "2" # optional
+## mixer_type "software" # optional
+#}
+#
+# An example of a recorder output:
+#
+#audio_output {
+# type "recorder"
+# name "My recorder"
+# encoder "vorbis" # optional, vorbis or lame
+# path "/var/lib/mpd/recorder/mpd.ogg"
+## quality "5.0" # do not define if bitrate is defined
+# bitrate "128" # do not define if quality is defined
+# format "44100:16:1"
+#}
+#
+# An example of a httpd output (built-in HTTP streaming server):
+#
+#audio_output {
+# type "httpd"
+# name "My HTTP Stream"
+# encoder "vorbis" # optional, vorbis or lame
+# port "8000"
+# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
+## quality "5.0" # do not define if bitrate is defined
+# bitrate "128" # do not define if quality is defined
+# format "44100:16:1"
+# max_clients "0" # optional 0=no limit
+#}
+#
+# An example of a pulseaudio output (streaming to a remote pulseaudio server)
+#
+#audio_output {
+# type "pulse"
+# name "My Pulse Output"
+## server "remote_server" # optional
+## sink "remote_server_sink" # optional
+#}
+#
+# An example of a winmm output (Windows multimedia API).
+#
+#audio_output {
+# type "winmm"
+# name "My WinMM output"
+## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
+# or
+## device "0" # optional
+## mixer_type "hardware" # optional
+#}
+#
+# An example of an openal output.
+#
+#audio_output {
+# type "openal"
+# name "My OpenAL output"
+## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
+#}
+#
+# An example of an sndio output.
+#
+#audio_output {
+# type "sndio"
+# name "sndio output"
+# mixer_type "software"
+#}
+#
+# An example of an OS X output:
+#
+#audio_output {
+# type "osx"
+# name "My OS X Device"
+## device "Built-in Output" # optional
+## channel_map "-1,-1,0,1" # optional
+#}
+#
+## Example "pipe" output:
+#
+#audio_output {
+# type "pipe"
+# name "my pipe"
+# command "aplay -f cd 2>/dev/null"
+## Or if you're want to use AudioCompress
+# command "AudioCompress -m | aplay -f cd 2>/dev/null"
+## Or to send raw PCM stream through PCM:
+# command "nc example.org 8765"
+# format "44100:16:2"
+#}
+#
+## An example of a null output (for no audio output):
+#
+#audio_output {
+# type "null"
+# name "My Null Output"
+# mixer_type "none" # optional
+#}
+#
+###############################################################################
+
+
+# Normalization automatic volume adjustments ##################################
+#
+# This setting specifies the type of ReplayGain to use. This setting can have
+# the argument "off", "album", "track" or "auto". "auto" is a special mode that
+# chooses between "track" and "album" depending on the current state of
+# random playback. If random playback is enabled then "track" mode is used.
+# See <http://www.replaygain.org> for more details about ReplayGain.
+# This setting is off by default.
+#
+#replaygain "album"
+#
+# This setting sets the pre-amp used for files that have ReplayGain tags. By
+# default this setting is disabled.
+#
+#replaygain_preamp "0"
+#
+# This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
+# By default this setting is disabled.
+#
+#replaygain_missing_preamp "0"
+#
+# This setting enables or disables ReplayGain limiting.
+# MPD calculates actual amplification based on the ReplayGain tags
+# and replaygain_preamp / replaygain_missing_preamp setting.
+# If replaygain_limit is enabled MPD will never amplify audio signal
+# above its original level. If replaygain_limit is disabled such amplification
+# might occur. By default this setting is enabled.
+#
+#replaygain_limit "yes"
+#
+# This setting enables on-the-fly normalization volume adjustment. This will
+# result in the volume of all playing audio to be adjusted so the output has
+# equal "loudness". This setting is disabled by default.
+#
+#volume_normalization "no"
+#
+###############################################################################
+
+# Character Encoding ##########################################################
+#
+# If file or directory names do not display correctly for your locale then you
+# may need to modify this setting.
+#
+#filesystem_charset "UTF-8"
+#
+###############################################################################
#+title: rc.org
#+property: header-args :comments no :mkdirp yes :results silent
-* About
-
-This org file contains the configuration files of pretty much every
-program I use. The files are tangled (i.e. exported, or derived) from
-this file using =org-babel=.
-
-Note: This file is best viewed inside Emacs with org mode.
-
-* Configs
-
-This section contains the configuration files (dotfiles) of various
-programs I use besides GNU Emacs.
-
-** Fontconfig
-:PROPERTIES:
-:header-args+: :tangle ~/.config/fontconfig/fonts.conf
-:END:
-
-#+begin_src xml
-<?xml version="1.0"?>
-<!DOCTYPE fontconfig SYSTEM "fonts.dtd">
-<fontconfig>
- <match target="font">
- <edit mode="assign" name="rgba">
- <const>rgb</const>
- </edit>
- </match>
- <match target="font">
- <edit mode="assign" name="hinting">
- <bool>true</bool>
- </edit>
- </match>
- <match target="font">
- <edit mode="assign" name="hintstyle">
- <const>hintslight</const>
- </edit>
- </match>
- <match target="font">
- <edit mode="assign" name="antialias">
- <bool>true</bool>
- </edit>
- </match>
- <match target="font">
- <edit mode="assign" name="lcdfilter">
- <const>lcddefault</const>
- </edit>
- </match>
- <dir>~/.fonts</dir>
-
- <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
- <alias binding="same">
- <family>Helvetica</family>
- <prefer>
- <family>Liberation Sans</family>
- </prefer>
-</alias>
-</fontconfig>
-#+end_src
-
-** getmail
-:PROPERTIES:
-:header-args+: :tangle ~/.config/getmail/getmailrc
-:END:
-
-#+begin_src conf
-[retriever]
-type = SimplePOP3SSLRetriever
-server = fencepost.gnu.org
-username = bandali
-password_command = ("gpg", "--no-tty", "-q", "-d", "/home/bandali/.passwd/gnu.gpg")
-port = 995
-use_apop = True
-
-[destination]
-type = Maildir
-path = ~/mail/gnu.local/bandali/mail/
-
-# [destination]
-# type = MDA_external
-# path = /usr/lib/dovecot/deliver
-# arguments = ('-e', '-f', '%(sender)', '-d', 'bandali@gnu.local')
-
-[options]
-read_all = false
-delete_after = 1
-# delete = true
-received = false
-delivered_to = false
-#+end_src
-
-** Git
-
-*** config
-:PROPERTIES:
-:header-args+: :tangle ~/.config/git/config
-:END:
-
-#+begin_src conf
-[user]
- name = Amin Bandali
- email = bandali@gnu.org
- signingkey = BE6273738E616D6D1B3A08E8A21A020248816103
-
-[commit]
- gpgsign = true
-
-# [format]
-# signoff = true
-
-[core]
- autocrlf = input # CRLF -> LF on commit
- editor = emacsclient -t
- pager = "less"
-
-[mailmap]
- file = ~/.config/git/mailmap
-
-[alias]
- git = !exec git # handle nested git calls, e.g. git git status
- aliases = config --get-regexp '^alias\\.'
- a = add
- s = status
- sl = status --long
- c = checkout
- cb = checkout -b
- b = branch
- r = rebase
- p = pull
- pr = pull --rebase
- ps = push
- psf = push --force
- nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f"
- nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f"
-
-[color]
- ui = auto
-[color "status"]
- added = green bold
- changed = red bold
- untracked = red bold
-[color "branch"]
- current = green bold
- remote = magenta bold
-[color "diff"]
- new = green bold
- old = red bold
-
-# [status]
-# # showUntrackedFiles = all
-# short=true
-# branch=true
-
-[github]
- user = notbandali
-
-[sendemail]
- smtpuser = bandali
- smtpserver = fencepost.gnu.org
- smtpserverport = 587
- smtpencryption = tls
- annotate = yes
-
-[transfer]
- fsckObjects = true
-#+end_src
-
-*** ignore
-:PROPERTIES:
-:header-args+: :tangle ~/.config/git/ignore
-:END:
-
-#+begin_src conf
-*.orig
-*.py[co]
-*.sublime-workspace
-*~
-.DS_Store
-*.elc
-*-autoloads.el
-TAGS
-#+end_src
-
-*** mailmap
-:PROPERTIES:
-:header-args+: :tangle ~/.config/git/mailmap
-:END:
-
-#+begin_src conf
-<bandali@gnu.org> <mab@gnu.org>
-<bandali@gnu.org> <amin@gnu.org>
-<bandali@gnu.org> <aminb@gnu.org>
-<bandali@gnu.org> <amin@aminb.org>
-<bandali@gnu.org> <me@aminb.org>
-#+end_src
-
-** GnuPG
-:PROPERTIES:
-:header-args+: :tangle ~/.gnupg/gpg-agent.conf
-:END:
-
-#+begin_src conf
-default-cache-ttl 43200
-max-cache-ttl 86400
-
-default-cache-ttl-ssh 43200
-max-cache-ttl-ssh 86400
-
-pinentry-program /home/bandali/.guix-profile/bin/pinentry-emacs
-allow-emacs-pinentry
-allow-loopback-pinentry
-#+end_src
-
-** GTK
-
-*** GTK+ 2
-:PROPERTIES:
-:header-args+: :tangle ~/.gtkrc-2.0
-:END:
-
-#+begin_src conf
-gtk-theme-name="Xfce"
-# gtk-icon-theme-name="elementary Xfce darker"
-gtk-font-name="Roboto 10"
-# gtk-font-name="Source Code Variable 10"
-gtk-menu-images=0
-# gtk-key-theme-name = "Emacs"
-#+end_src
-
-*** GTK+ 3
-:PROPERTIES:
-:header-args+: :tangle ~/.config/gtk-3.0/settings.ini
-:END:
-
-#+begin_src conf
-[Settings]
-gtk-icon-theme-name = Adwaita
-# gtk-theme-name = Adwaita
-
-gtk-theme-name = Xfce
-# gtk-theme-name = Arc-Darker
-# gtk-theme-name = Numix-ArchBlue
-
-gtk-font-name = Roboto 10
-# gtk-font-name = Source Code Variable Medium 10
-# gtk-key-theme-name = Emacs
-#+end_src
-
-** Guix
-
-*** Channels
-:PROPERTIES:
-:header-args+: :tangle ~/.config/guix/channels.scm
-:END:
-
-#+begin_src scheme
-(list (channel
- (name 'guix) ; https://git.savannah.gnu.org/git/guix.git
- (url "file:///home/bandali/src/git/guix"))
- (channel
- (name 'guix-bandali) ; https://git.sr.ht/~bandali/guix-bandali
- (url "file:///home/bandali/src/git/guix-bandali")))
-#+end_src
-
-*** Profile manifests
-
-To install/update the packages of the default profile, use
-#+begin_example
-guix package -m $MY_GUIX_MANIFESTS/main.scm
-#+end_example
-and for other profiles, use
-#+begin_example
-guix package -m $MY_GUIX_MANIFESTS/name.scm -p $MY_GUIX_PROFILES/name/name
-#+end_example
-where =name= is the name of the profile (e.g. =doc=, =media=, ...).
-
-**** doc
-:PROPERTIES:
-:header-args+: :tangle ~/.config/guix/manifest/doc.scm
-:END:
-
-#+begin_src scheme
-(specifications->manifest
- '("libreoffice"
- "texlive-amsfonts"
- "texlive-base"
- "texlive-latex-listings"
- ;; "texlive-palatino"
- "texlive-xcolor"
-))
-#+end_src
-
-**** main
-:PROPERTIES:
-:header-args+: :tangle ~/.config/guix/manifest/main.scm
-:END:
-
-#+begin_src scheme
-(specifications->manifest
- '("alsa-utils"
- "bash-completion"
- "cpufrequtils"
- "cpupower"
- "cvs"
- "dunst"
- "emacs"
- "emacs-alert"
- "emacs-amx"
- "emacs-async"
- "emacs-biblio-git"
- "emacs-boxquote"
- "emacs-company"
- "emacs-company-ebdb"
- "emacs-crux"
- "emacs-dash"
- "emacs-debbugs"
- "emacs-diff-hl"
- "emacs-dmenu"
- "emacs-doom-themes"
- "emacs-ebdb"
- "emacs-emmet-mode"
- ;; "emacs-emojify"
- "emacs-erc-hl-nicks"
- "emacs-erc-scrolltoplace"
- "emacs-eshell-up"
- "emacs-exec-path-from-shell"
- "emacs-expand-region"
- "emacs-exwm"
- "emacs-exwm-edit"
- "emacs-flycheck"
- "emacs-geiser"
- ;; "emacs-gnus-harvest"
- "emacs-guix"
- "emacs-helpful"
- "emacs-hl-todo"
- "emacs-ivy"
- "emacs-magit"
- "emacs-message-x"
- "emacs-minions"
- ;; "emacs-multi-term"
- "emacs-multiple-cursors"
- "emacs-mwim"
- ;; "emacs-next"
- ;; "emacs-next-delight"
- "emacs-no-littering"
- "emacs-org"
- "emacs-org-contrib"
- "emacs-org-ref"
- "emacs-orgalist"
- "emacs-page-break-lines"
- "emacs-pass"
- "emacs-pinentry"
- "emacs-projectile"
- "emacs-shrink-path-git"
- "emacs-smart-mode-line"
- "emacs-typo"
- "emacs-unkillable-scratch"
- "emacs-use-package"
- "emacs-web-mode"
- "emacs-which-key"
- "emacs-yasnippet"
- "emacs-znc-git"
- "font-adobe-source-code-pro"
- "font-gnu-freefont-ttf"
- "font-google-roboto"
- "font-liberation"
- "font-linuxlibertine"
- "font-sil-gentium"
- "font-tex-gyre"
- ;; "font-ubuntu"
- "font-vazir"
- "getmail"
- "gettext"
- "git"
- "git:send-email"
- "gnupg"
- "guile"
- "haunt"
- "htop"
- "hunspell"
- "hunspell-dict-en-ca"
- "hunspell-dict-en-us"
- "isync"
- "light"
- "msmtp"
- "ncdu"
- "notmuch"
- "openjdk"
- "openssh"
- "openssl"
- "pass-otp"
- "password-store"
- "pasystray"
- "pinentry-emacs"
- "poppler" ; for 'pdffonts'
- "rofi"
- "rofi-pass"
- "rsync"
- "rxvt-unicode"
- "screen"
- "scrot"
- "setxkbmap"
- "strace"
- "thinkfan"
- "unzip"
- "wget"
- "xdg-user-dirs"
- ;; "xkbcomp"
- "xmodmap"
- "xrdb"
- "xset"
- "xsetroot"))
-#+end_src
-
-**** media
-:PROPERTIES:
-:header-args+: :tangle ~/.config/guix/manifest/media.scm
-:END:
-
-#+begin_src scheme
-(specifications->manifest
- '("audacity"
- "gimp"
- "inkscape"
- "mpv"
- "youtube-dl"))
-#+end_src
-
-**** web
-:PROPERTIES:
-:header-args+: :tangle ~/.config/guix/manifest/web.scm
-:END:
-
-#+begin_src scheme
-(specifications->manifest
- '("icecat"
- "rtv"))
-#+end_src
-
-*** Systems
-
-**** chaman
-:PROPERTIES:
-:header-args+: :tangle ~/.config/guix/system/chaman.scm
-:END:
-
-#+begin_src scheme
-(use-modules (gnu)
- (gnu packages certs) ; for nss-certs
- (gnu packages emacs-xyz) ; for exwm
- (gnu packages linux)) ; for powertop
-(use-service-modules admin desktop mail networking pm ssh xorg)
-
-(operating-system
- (host-name "chaman")
- (locale "en_CA.utf8")
- (timezone "Canada/Eastern")
- (keyboard-layout
- (keyboard-layout "us" "basic"))
- (bootloader
- (bootloader-configuration
- (bootloader grub-bootloader)
- (target "/dev/sda")
- (keyboard-layout keyboard-layout)))
- (mapped-devices
- (list (mapped-device
- (source
- (uuid "283da85e-2c84-47e6-a8ca-20f4e8efb806"))
- (target "groot")
- (type luks-device-mapping))
- (mapped-device
- (source
- (uuid "017ddebc-c2c3-4a0a-bda4-d47ec0bc67f0"))
- (target "data")
- (type luks-device-mapping))))
- (file-systems
- (cons* (file-system
- (mount-point "/")
- (device "/dev/mapper/groot")
- (type "ext4")
- (dependencies mapped-devices))
- (file-system
- (mount-point "/data")
- (device "/dev/mapper/data")
- (type "ext4")
- (dependencies mapped-devices))
- %base-file-systems))
- (users
- (cons* (user-account
- (name "bandali")
- (group "users")
- (home-directory "/home/bandali")
- (supplementary-groups
- '("wheel" "netdev" "audio" "video")))
- %base-user-accounts))
- (packages
- (cons* nss-certs
- emacs-exwm
- %base-packages))
- (services
- (cons*
- (service xfce-desktop-service-type)
- (set-xorg-configuration
- (xorg-configuration
- (keyboard-layout keyboard-layout)))
- (dovecot-service
- #:config
- (dovecot-configuration
- ;; (log-path "/dev/stderr")
- (protocols (list (protocol-configuration
- (name "imap"))))
- (ssl? "no")
- (listen '("127.0.0.1"))
- (disable-plaintext-auth? #f)
- (auth-mechanisms '("plain"))
- (postmaster-address "bandali@gnu.local")
- (mail-location "maildir:/home/bandali/mail/%d/%n/mail")
- (userdbs (list (userdb-configuration
- (driver "static")
- (args (list "uid=bandali" "gid=users" "home=/home/bandali/mail/%d/%n")))))
- (passdbs (list (passdb-configuration
- (driver "passwd-file")
- (args (list "/data/dovecot-passwd")))))))
- (service rottlog-service-type)
- (service thermald-service-type)
- (service tlp-service-type
- (tlp-configuration
- (cpu-boost-on-ac? #t)
- (sound-power-save-on-bat 0)
- (sound-power-save-controller? #f)
- ;; (usb-blacklist "0e8f:00a8") ;for some reason doesn't seem to work
- (usb-autosuspend? #f)))
- (simple-service 'my-powertop-auto-tune activation-service-type
- #~(zero? (system* #$(file-append powertop "/sbin/powertop")
- "--auto-tune")))
- (simple-service 'light-udev-rules udev-service-type (list light))
- %desktop-services)))
-#+end_src
-
-** isync
-:PROPERTIES:
-:header-args+: :tangle ~/.config/isync/mbsyncrc
-:END:
-
-#+begin_src conf
-# Global defaults
-CopyArrivalDate yes
-Create Both
-Expunge Both
-
-######
-IMAPAccount shemshak
-Host mail.shemshak.org
-User bandali@shemshak.org
-PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/shemshak.gpg"
-SSLType IMAPS
-
-IMAPStore shemshak-remote
-Account shemshak
-
-IMAPAccount shemshak-local
-Host 127.0.0.1
-Port 143
-User bandali@shemshak.local
-PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/shemshak-local.gpg"
-SSLType None
-
-IMAPStore shemshak-local
-Account shemshak-local
-
-Channel shemshak
-Master :shemshak-remote:
-Slave :shemshak-local:
-Patterns *
-
-######
-IMAPAccount gnub
-Host mail.shemshak.org
-User gnu@bndl.org
-PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/gnub.gpg"
-SSLType IMAPS
-
-IMAPStore gnub-remote
-Account gnub
-
-IMAPAccount gnub-local
-Host 127.0.0.1
-Port 143
-User bandali@gnu.local
-PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/gnub-local.gpg"
-SSLType None
-
-IMAPStore gnub-local
-Account gnub-local
-
-Channel gnub
-Master :gnub-remote:
-Slave :gnub-local:
-Patterns *
-
-######
-IMAPAccount uwaterloo
-Host connect.uwaterloo.ca
-User abandali
-PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
-SSLType IMAPS
-
-IMAPStore uwaterloo-remote
-Account uwaterloo
-
-IMAPAccount uwaterloo-local
-Host 127.0.0.1
-Port 143
-User abandali@uwaterloo.local
-PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo-local.gpg"
-SSLType None
-
-IMAPStore uwaterloo-local
-Account uwaterloo-local
-
-Channel uwaterloo
-Master :uwaterloo-remote:
-Slave :uwaterloo-local:
-Patterns *
-
-######
-IMAPAccount csclub
-Host mail.csclub.uwaterloo.ca
-User abandali
-PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/csclub.gpg"
-SSLType IMAPS
-
-IMAPStore csclub-remote
-Account csclub
-
-IMAPAccount csclub-local
-Host 127.0.0.1
-Port 143
-User abandali@csclub.uwaterloo.local
-PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/csclub-local.gpg"
-SSLType None
-
-IMAPStore csclub-local
-Account csclub-local
-
-Channel csclub
-Master :csclub-remote:
-Slave :csclub-local:
-Patterns *
-#+end_src
-
-** Latexmk
-:PROPERTIES:
-:header-args+: :tangle ~/.config/latexmk/latexmkrc
-:END:
-
-#+begin_src conf
-$pdf_previewer = "start zathura %O %S";
-$clean_ext = "aux out";
-
-# $pdf_update_method = 4;
-# $pdf_update_command = "zathura %O %S";
-
-# Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
-# by Ctrl+click in the PDF.
-# Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
-# editor.
-# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
-#+end_src
-
-** mpd
-:PROPERTIES:
-:header-args+: :tangle ~/.config/mpd/mpd.conf
-:END:
-
-#+begin_src conf
-# An example configuration file for MPD.
-# Read the user manual for documentation: http://www.musicpd.org/doc/user/
-
-
-# Files and directories #######################################################
-#
-# This setting controls the top directory which MPD will search to discover the
-# available audio files and add them to the daemon's online database. This
-# setting defaults to the XDG directory, otherwise the music directory will be
-# be disabled and audio files will only be accepted over ipc socket (using
-# file:// protocol) or streaming files over an accepted protocol.
-#
-music_directory "~/usr/music"
-#
-# This setting sets the MPD internal playlist directory. The purpose of this
-# directory is storage for playlists created by MPD. The server will use
-# playlist files not created by the server but only if they are in the MPD
-# format. This setting defaults to playlist saving being disabled.
-#
-playlist_directory "~/.mpd/playlists"
-#
-# This setting sets the location of the MPD database. This file is used to
-# load the database at server start up and store the database while the
-# server is not up. This setting defaults to disabled which will allow
-# MPD to accept files over ipc socket (using file:// protocol) or streaming
-# files over an accepted protocol.
-#
-db_file "~/.mpd/database"
-#
-# These settings are the locations for the daemon log files for the daemon.
-# These logs are great for troubleshooting, depending on your log_level
-# settings.
-#
-# The special value "syslog" makes MPD use the local syslog daemon. This
-# setting defaults to logging to syslog, otherwise logging is disabled.
-#
-log_file "~/.mpd/log"
-#
-# This setting sets the location of the file which stores the process ID
-# for use of mpd --kill and some init scripts. This setting is disabled by
-# default and the pid file will not be stored.
-#
-pid_file "~/.mpd/pid"
-#
-# This setting sets the location of the file which contains information about
-# most variables to get MPD back into the same general shape it was in before
-# it was brought down. This setting is disabled by default and the server
-# state will be reset on server start up.
-#
-state_file "~/.mpd/state"
-#
-# The location of the sticker database. This is a database which
-# manages dynamic information attached to songs.
-#
-sticker_file "~/.mpd/sticker.sql"
-#
-###############################################################################
-
-
-# General music daemon options ################################################
-#
-# This setting specifies the user that MPD will run as. MPD should never run as
-# root and you may use this setting to make MPD change its user ID after
-# initialization. This setting is disabled by default and MPD is run as the
-# current user.
-#
-#user "nobody"
-#
-# This setting specifies the group that MPD will run as. If not specified
-# primary group of user specified with "user" setting will be used (if set).
-# This is useful if MPD needs to be a member of group such as "audio" to
-# have permission to use sound card.
-#
-#group "nogroup"
-#
-# This setting sets the address for the daemon to listen on. Careful attention
-# should be paid if this is assigned to anything other then the default, any.
-# This setting can deny access to control of the daemon. Not effective if
-# systemd socket activiation is in use.
-#
-# For network
-#bind_to_address "any"
-#
-# And for Unix Socket
-#bind_to_address "~/.mpd/socket"
-#
-# This setting is the TCP port that is desired for the daemon to get assigned
-# to.
-#
-#port "6600"
-#
-# This setting controls the type of information which is logged. Available
-# setting arguments are "default", "secure" or "verbose". The "verbose" setting
-# argument is recommended for troubleshooting, though can quickly stretch
-# available resources on limited hardware storage.
-#
-#log_level "default"
-#
-# If you have a problem with your MP3s ending abruptly it is recommended that
-# you set this argument to "no" to attempt to fix the problem. If this solves
-# the problem, it is highly recommended to fix the MP3 files with vbrfix
-# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
-# point gapless MP3 playback can be enabled.
-#
-#gapless_mp3_playback "yes"
-#
-# Setting "restore_paused" to "yes" puts MPD into pause mode instead
-# of starting playback after startup.
-#
-#restore_paused "no"
-#
-# This setting enables MPD to create playlists in a format usable by other
-# music players.
-#
-#save_absolute_paths_in_playlists "no"
-#
-# This setting defines a list of tag types that will be extracted during the
-# audio file discovery process. The complete list of possible values can be
-# found in the user manual.
-#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
-#
-# This setting enables automatic update of MPD's database when files in
-# music_directory are changed.
-#
-#auto_update "yes"
-#
-# Limit the depth of the directories being watched, 0 means only watch
-# the music directory itself. There is no limit by default.
-#
-#auto_update_depth "3"
-#
-###############################################################################
-
-
-# Symbolic link behavior ######################################################
-#
-# If this setting is set to "yes", MPD will discover audio files by following
-# symbolic links outside of the configured music_directory.
-#
-#follow_outside_symlinks "yes"
-#
-# If this setting is set to "yes", MPD will discover audio files by following
-# symbolic links inside of the configured music_directory.
-#
-#follow_inside_symlinks "yes"
-#
-###############################################################################
-
-
-# Zeroconf / Avahi Service Discovery ##########################################
-#
-# If this setting is set to "yes", service information will be published with
-# Zeroconf / Avahi.
-#
-#zeroconf_enabled "yes"
-#
-# The argument to this setting will be the Zeroconf / Avahi unique name for
-# this MPD server on the network.
-#
-#zeroconf_name "Music Player"
-#
-###############################################################################
-
-
-# Permissions #################################################################
-#
-# If this setting is set, MPD will require password authorization. The password
-# setting can be specified multiple times for different password profiles.
-#
-#password "password@read,add,control,admin"
-#
-# This setting specifies the permissions a user has who has not yet logged in.
-#
-#default_permissions "read,add,control,admin"
-#
-###############################################################################
-
-
-# Database #######################################################################
-#
-
-#database {
-# plugin "proxy"
-# host "other.mpd.host"
-# port "6600"
-#}
-
-# Input #######################################################################
-#
-
-input {
- plugin "curl"
-# proxy "proxy.isp.com:8080"
-# proxy_user "user"
-# proxy_password "password"
-}
-
-#
-###############################################################################
-
-# Audio Output ################################################################
-#
-
-audio_output {
- type "pulse"
- name "pulse audio"
-}
-
-audio_output {
- type "fifo"
- name "my_fifo"
- path "/tmp/mpd.fifo"
- format "44100:16:2"
-}
-
-# MPD supports various audio output types, as well as playing through multiple
-# audio outputs at the same time, through multiple audio_output settings
-# blocks. Setting this block is optional, though the server will only attempt
-# autodetection for one sound card.
-#
-# An example of an ALSA output:
-#
-#audio_output {
-# type "alsa"
-# name "My ALSA Device"
-## device "hw:0,0" # optional
-## mixer_type "hardware" # optional
-## mixer_device "default" # optional
-## mixer_control "PCM" # optional
-## mixer_index "0" # optional
-#}
-#
-# An example of an OSS output:
-#
-#audio_output {
-# type "oss"
-# name "My OSS Device"
-## device "/dev/dsp" # optional
-## mixer_type "hardware" # optional
-## mixer_device "/dev/mixer" # optional
-## mixer_control "PCM" # optional
-#}
-#
-# An example of a shout output (for streaming to Icecast):
-#
-#audio_output {
-# type "shout"
-# encoder "vorbis" # optional
-# name "My Shout Stream"
-# host "localhost"
-# port "8000"
-# mount "/mpd.ogg"
-# password "hackme"
-# quality "5.0"
-# bitrate "128"
-# format "44100:16:1"
-## protocol "icecast2" # optional
-## user "source" # optional
-## description "My Stream Description" # optional
-## url "http://example.com" # optional
-## genre "jazz" # optional
-## public "no" # optional
-## timeout "2" # optional
-## mixer_type "software" # optional
-#}
-#
-# An example of a recorder output:
-#
-#audio_output {
-# type "recorder"
-# name "My recorder"
-# encoder "vorbis" # optional, vorbis or lame
-# path "/var/lib/mpd/recorder/mpd.ogg"
-## quality "5.0" # do not define if bitrate is defined
-# bitrate "128" # do not define if quality is defined
-# format "44100:16:1"
-#}
-#
-# An example of a httpd output (built-in HTTP streaming server):
-#
-#audio_output {
-# type "httpd"
-# name "My HTTP Stream"
-# encoder "vorbis" # optional, vorbis or lame
-# port "8000"
-# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
-## quality "5.0" # do not define if bitrate is defined
-# bitrate "128" # do not define if quality is defined
-# format "44100:16:1"
-# max_clients "0" # optional 0=no limit
-#}
-#
-# An example of a pulseaudio output (streaming to a remote pulseaudio server)
-#
-#audio_output {
-# type "pulse"
-# name "My Pulse Output"
-## server "remote_server" # optional
-## sink "remote_server_sink" # optional
-#}
-#
-# An example of a winmm output (Windows multimedia API).
-#
-#audio_output {
-# type "winmm"
-# name "My WinMM output"
-## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
-# or
-## device "0" # optional
-## mixer_type "hardware" # optional
-#}
-#
-# An example of an openal output.
-#
-#audio_output {
-# type "openal"
-# name "My OpenAL output"
-## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
-#}
-#
-# An example of an sndio output.
-#
-#audio_output {
-# type "sndio"
-# name "sndio output"
-# mixer_type "software"
-#}
-#
-# An example of an OS X output:
-#
-#audio_output {
-# type "osx"
-# name "My OS X Device"
-## device "Built-in Output" # optional
-## channel_map "-1,-1,0,1" # optional
-#}
-#
-## Example "pipe" output:
-#
-#audio_output {
-# type "pipe"
-# name "my pipe"
-# command "aplay -f cd 2>/dev/null"
-## Or if you're want to use AudioCompress
-# command "AudioCompress -m | aplay -f cd 2>/dev/null"
-## Or to send raw PCM stream through PCM:
-# command "nc example.org 8765"
-# format "44100:16:2"
-#}
-#
-## An example of a null output (for no audio output):
-#
-#audio_output {
-# type "null"
-# name "My Null Output"
-# mixer_type "none" # optional
-#}
-#
-###############################################################################
-
-
-# Normalization automatic volume adjustments ##################################
-#
-# This setting specifies the type of ReplayGain to use. This setting can have
-# the argument "off", "album", "track" or "auto". "auto" is a special mode that
-# chooses between "track" and "album" depending on the current state of
-# random playback. If random playback is enabled then "track" mode is used.
-# See <http://www.replaygain.org> for more details about ReplayGain.
-# This setting is off by default.
-#
-#replaygain "album"
-#
-# This setting sets the pre-amp used for files that have ReplayGain tags. By
-# default this setting is disabled.
-#
-#replaygain_preamp "0"
-#
-# This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
-# By default this setting is disabled.
-#
-#replaygain_missing_preamp "0"
-#
-# This setting enables or disables ReplayGain limiting.
-# MPD calculates actual amplification based on the ReplayGain tags
-# and replaygain_preamp / replaygain_missing_preamp setting.
-# If replaygain_limit is enabled MPD will never amplify audio signal
-# above its original level. If replaygain_limit is disabled such amplification
-# might occur. By default this setting is enabled.
-#
-#replaygain_limit "yes"
-#
-# This setting enables on-the-fly normalization volume adjustment. This will
-# result in the volume of all playing audio to be adjusted so the output has
-# equal "loudness". This setting is disabled by default.
-#
-#volume_normalization "no"
-#
-###############################################################################
-
-# Character Encoding ##########################################################
-#
-# If file or directory names do not display correctly for your locale then you
-# may need to modify this setting.
-#
-#filesystem_charset "UTF-8"
-#
-###############################################################################
-#+end_src
-
-** msmtp
-:PROPERTIES:
-:header-args+: :tangle ~/.config/msmtp/config
-:END:
-
-#+begin_src conf
-# Set default values for all following accounts.
-defaults
-port 587
-tls on
-auth on
-#tls_trust_file /etc/ssl/certs/ca-certificates.crt
-logfile ~/.msmtp.log
-
-account shemshak
-host mail.shemshak.org
-# use `msmtp -a shemshak --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
-tls_fingerprint A9:B8:79:CE:47:F7:E8:EB:7B:0D:C5:3E:1E:35:72:A0:03:E3:A2:1A:A9:1C:24:34:6E:F9:9E:78:89:67:11:E3
-tls_starttls on
-from amin@shemshak.org
-user bandali@shemshak.org
-passwordeval gpg --no-tty -q -d ~/.passwd/shemshak.gpg
-
-account bandali : shemshak
-from bandali@shemshak.org
-account aminb : shemshak
-from amin@aminb.org
-account bndl : shemshak
-from a@bndl.org
-
-account gnu
-host fencepost.gnu.org
-# use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
-tls_fingerprint 36:A7:33:D0:57:25:BB:D8:A8:21:7B:A3:91:05:A9:4F:43:4E:87:AE:65:4B:0D:A4:A0:9A:08:89:AE:1F:A5:D7
-tls_starttls on
-from bandali@gnu.org
-user bandali
-passwordeval gpg --no-tty -q -d ~/.passwd/gnu.gpg
-
-account gnu-mab : gnu
-from mab@gnu.org
-account gnu-aminb : gnu
-from aminb@gnu.org
-account gnu-amin : gnu
-from amin@gnu.org
-
-account uwaterloo
-host connect.uwaterloo.ca
-tls_starttls on
-from abandali@uwaterloo.ca
-user abandali
-passwordeval gpg --no-tty -q -d ~/.passwd/uwaterloo.gpg
-tls_trust_file /etc/ssl/certs/ca-certificates.crt
-
-account uwaterloo-friendly : uwaterloo
-from bandali@uwaterloo.ca
-
-account csclub
-host mail.csclub.uwaterloo.ca
-tls_starttls on
-from abandali@csclub.uwaterloo.ca
-user abandali
-passwordeval gpg --no-tty -q -d ~/.passwd/csclub.gpg
-tls_trust_file /etc/ssl/certs/ca-certificates.crt
-
-account csclub-friendly : csclub
-from bandali@csclub.uwaterloo.ca
-
-account sfl
-host mail.savoirfairelinux.com
-tls on
-from amin.bandali@savoirfairelinux.com
-user amin.bandali
-passwordeval gpg --no-tty -q -d ~/.passwd/sfl.gpg
-tls_trust_file /etc/ssl/certs/ca-certificates.crt
-
-# Set a default account
-account default : shemshak
-#+end_src
-
-** Readline
-:PROPERTIES:
-:header-args+: :tangle ~/.config/readline/inputrc
-:END:
-
-#+begin_src conf
-set enable-bracketed-paste on
-
-set colored-stats on
-set colored-completion-prefix on
-set completion-ignore-case on
-set menu-complete-display-prefix on
-set page-completions off
-set show-all-if-ambiguous on
-set show-all-if-unmodified on
-set visible-stats on
-
-TAB: menu-complete
-"\e[Z": menu-complete-backward
-
-"\e[A": history-search-backward
-"\e[B": history-search-forward
-#+end_src
-
-** rofi
-:PROPERTIES:
-:header-args+: :tangle ~/.config/rofi/config
-:END:
-
-#+begin_src conf
-! rofi.font: Ubuntu Mono 13
-! rofi.font: Inconsolata 16
-! rofi.font: Iosevka 13
-! rofi.font: Source Code Pro 11
-rofi.font: Source Code Pro 10.5
-rofi.modi: run,window
-! rofi.width: 640
-rofi.width: 600
-!rofi.location: 2
-!rofi.yoffset: 200
-rofi.monitor: -1
-!rofi.lines: 10
-
-rofi.theme: ~/.guix-profile/share/rofi/themes/gruvbox-light-hard.rasi
-#+end_src
-
-** rofi-pass
-:PROPERTIES:
-:header-args+: :tangle ~/.config/rofi-pass/config
-:END:
-
-#+begin_src conf
-# permanently set alternative root dir
-# root=/path/to/root
-
-# rofi command. Make sure to have "$@" as last argument
-_rofi () {
- #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
- rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
-}
-
-# xdotool needs the keyboard layout to be set using setxkbmap
-# You can do this in your autostart scripts (e.g. xinitrc)
-
-# If for some reason, you cannot do this, you can set the command here.
-# and set fix_layout to true
-fix_layout=false
-
-layout_cmd () {
- setxkbmap us
-}
-
-# fields to be used
-URL_field='url'
-USERNAME_field='user'
-AUTOTYPE_field='autotype'
-
-# delay to be used for :delay keyword
-delay=2
-
-## Programs to be used
-# Editor
-EDITOR='gvim -f'
-
-# Browser
-BROWSER='chromium'
-
-## Misc settings
-
-default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
-auto_enter='false'
-notify='false'
-default_autotype='user :tab pass'
-
-# color of the help messages
-# leave empty for autodetection
-help_color="#4872FF"
-
-# Clipboard settings
-# Possible options: primary, clipboard, both
-clip=primary
-
-# Options for generating new password entries
-# default_user is also used for password files that have no user field.
-default_user=aminb
-default_user2=bandali
-password_length=30
-
-# Custom Keybindings
-#autotype="Alt+1"
-autotype="Alt+m"
-type_user="Alt+2"
-type_pass="Alt+3"
-open_url="Alt+4"
-copy_name="Alt+u"
-copy_url="Alt+l"
-copy_pass="Alt+p"
-show="Alt+o"
-copy_entry="Alt+2"
-type_entry="Alt+1"
-copy_menu="Alt+c"
-action_menu="Alt+a"
-type_menu="Alt+t"
-help="Alt+h"
-switch="Alt+x"
-insert_pass="Alt+n"
-#+end_src
-
-** Screen
-:PROPERTIES:
-:header-args+: :tangle ~/.config/screen/screenrc
-:END:
-
-#+begin_src screen
-startup_message off
-caption always "%{= kc}GNU Screen $USER@%H (load: %l)%-28=%{= .m}%D %d.%m.%Y %0c"
-#+end_src
-
-** Shell
-
-*** GNU Bash
-:PROPERTIES:
-:header-args+: :tangle ~/.bashrc
-:END:
-
-#+begin_src bash
-# Bash initialization for interactive non-login shells and
-# for remote shells (info "(bash) Bash Startup Files").
-
-# Export 'SHELL' to child processes. Programs such as 'screen'
-# honor it and otherwise use /bin/sh.
-export SHELL
-
-if [[ $- != *i* ]]
-then
- # We are being invoked from a non-interactive shell. If this
- # is an SSH session (as in "ssh host command"), source
- # /etc/profile so we get PATH and other essential variables.
- [[ -n "$SSH_CLIENT" ]] && source /etc/profile
-
- # Don't do anything else.
- return
-fi
-
-if [ -n "$IS_GUIX_SYSTEM" ]; then
- # Source the system-wide file.
- source /etc/bashrc
-fi
-
-# from https://unix.stackexchange.com/a/55935
-b_prompt() {
- cwd=$(sed -e "s:$HOME:~:" -e "s:\(\.\?[^/]\)[^/]*/:\1/:g" <<<$PWD)
- printf $cwd
-}
-
-if [ $(id -u) == "0" ]; then
- PS1='`printf "\[\e[1;31m\]\$\[\e[00m\]"` '
-else
- PS1='\$ '
-fi
-PS1="\u@\h:\w/`[ -n "$GUIX_ENVIRONMENT" ] && printf \" [env]\"`\n$PS1"
-
-# set terminal title
-PROMPT_COMMAND='echo -ne "\033]0;${USER}@${HOSTNAME}: $(b_prompt)\007"'
-
-# i-beam cursor
-# echo -e "\033[5 q" # blinking
-echo -e "\033[6 q" # non-blinking
-
-# various bash tweaks
-# append to the history file, don't overwrite it
-shopt -s histappend
-shopt -s cmdhist
-# check the window size after each command and, if necessary,
-# update the values of LINES and COLUMNS.
-shopt -s checkwinsize
-# If set, the pattern "**" used in a pathname expansion context will
-# match all files and zero or more directories and subdirectories.
-#shopt -s globstar
-# for setting history length see HISTSIZE and HISTFILESIZE in bash(1)
-HISTSIZE=
-HISTFILESIZE=
-# don't put duplicate lines or lines starting with space in the
-# history.
-HISTCONTROL=ignoreboth
-# ignore a few very common commands and don't add them to history
-HISTIGNORE='ls:l:s:g:[bf]g:history'
-HISTTIMEFORMAT='%F %T '
-stty stop ""
-
-# aliases
-alias ls='ls -p --color=auto'
-alias l='ls -lh' # long format and human-readable sizes
-alias ll='l -A' # long format, all files
-alias dir='dir --color=auto'
-alias vdir='vdir --color=auto'
-alias grep='grep --color=auto'
-alias fgrep='fgrep --color=auto'
-alias egrep='egrep --color=auto'
-alias mpv="mpv --ytdl-format mp4"
-alias mv="mv -iv"
-alias cp="cp -iv"
-alias mbsync='mbsync -c "$XDG_CONFIG_HOME"/isync/mbsyncrc'
-alias getmail='getmail --getmaildir "$XDG_CONFIG_HOME"/getmail --rcfile getmailrc'
-alias m="mbsync csclub; mbsync uwaterloo; mbsync shemshak; mbsync gnub"
-alias best="youtube-dl -f best"
-alias e="$EDITOR"
-alias se="SUDO_EDITOR=\"emacsclient\" sudo -e"
-
-aur() {
- cd ~/usr/builds
- [ -d ${1} ] || git clone https://aur.archlinux.org/${1}.git
- cd ${1}
-}
-
-function t {
- cd $(mktemp -d /tmp/$1.XXXX)
-}
-
-# separate alias definitions file, if exists
-if [ -f ~/.bash_aliases ]; then
- . ~/.bash_aliases
-fi
-
-# enable programmable completion features (not needed if already
-# enabled in /etc/bash.bashrc and if /etc/profile sources
-# /etc/bash.bashrc).
-if ! shopt -oq posix; then
- if [ -f /usr/share/bash-completion/bash_completion ]; then
- . /usr/share/bash-completion/bash_completion
- elif [ -f /etc/bash_completion ]; then
- . /etc/bash_completion
- fi
-fi
-
-# source Guix shell config dirs, for vte.sh and bash completions
-GUIX_PROFILES=("${HOME}/.guix-profile"
- "${HOME}/.config/guix/current")
-for profile in "${GUIX_PROFILES[@]}"; do
- for dir in "${profile}/etc/bash_completion.d" "${profile}/etc/profile.d"; do
- if [ -d "${dir}" ]; then
- for f in "${dir}"/*; do
- . $f
- done
- fi
- done
-done
-#+end_src
-
-*** profile
-:PROPERTIES:
-:header-args+: :tangle ~/.profile
-:END:
-
-#+begin_src sh
-# ~/.profile: executed by the command interpreter for login shells.
-# This file is not read by bash(1), if ~/.bash_profile or ~/.bash_login
-# exists.
-
-# source host-specific profile
-if [ -f "$HOME/.config/profiles/$(hostname)" ]; then
- . "$HOME/.config/profiles/$(hostname)"
-fi
-
-export EDITOR="emacsclient -nw"
-export VISUAL="emcl"
-
-PATH="$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH"
-if [ -z "$IS_GUIX_SYSTEM" ]; then
- PATH="$HOME/.config/guix/current/bin${PATH:+:}$PATH"
- INFOPATH="$HOME/.config/guix/current/share/info${INFOPATH:+:}$INFOPATH"
- export GUIX_LOCPATH="$HOME/.guix-profile/lib/locale"
-fi
-export PATH
-export INFOPATH
-
-export MY_GUIX_MANIFESTS="$HOME/.config/guix/manifest"
-export MY_GUIX_PROFILES="$HOME/.config/guix/profile"
-
-export XDG_CONFIG_HOME="$HOME/.config"
-export XDG_DATA_HOME="$HOME/.local/share"
-
-if [ -f "$HOME/.config/user-dirs.dirs" ]; then
- set -a
- . "$HOME/.config/user-dirs.dirs"
- set +a
-fi
-
-export INPUTRC="$XDG_CONFIG_HOME"/readline/inputrc
-export SCREENRC="$XDG_CONFIG_HOME"/screen/screenrc
-
-export MAILDIR="$HOME/mail"
-export CVS_RSH="ssh"
-
-if [ -x "$(command -v go)" ]; then
- export GOPATH="$HOME/src/go"
- export PATH="$GOPATH/bin:$PATH"
-fi
-
-# if running bash
-if [ -n "$BASH_VERSION" ]; then
- # include .bashrc if it exists
- if [ -f "$HOME/.bashrc" ]; then
- . "$HOME/.bashrc"
- fi
-fi
-
-if [ -z "$IS_GUIX_SYSTEM" ]; then
- # if guix is installed
- if [ -x "$(command -v guix)" ]; then
- SSL_CERT_DIR="$HOME/.guix-profile/etc/ssl/certs"
- if [ -d "$SSL_CERT_DIR" -o -h "$SSL_CERT_DIR" ]; then
- export SSL_CERT_DIR
- export SSL_CERT_FILE="$HOME/.guix-profile/etc/ssl/certs/ca-certificates.crt"
- else
- printf "it seems you forgot to \`guix install nss-certs\'\n"
- fi
- GUIX_PROFILE="$HOME/.guix-profile"
- . "$GUIX_PROFILE/etc/profile"
- unset XDG_DATA_DIRS
- fi
-fi
-
-for p in $MY_GUIX_PROFILES/*; do
- profile=$p/$(basename "$p")
- if [ -f "$profile"/etc/profile ]; then
- GUIX_PROFILE="$profile"
- . "$GUIX_PROFILE"/etc/profile
- fi
- unset profile
-done
-
-export PATH="$HOME/usr/local/bin:$HOME/.local/bin:$PATH"
-
-# start an ssh-agent (with guix's openssh)
-if [ -z "$IS_GUIX_SYSTEM" ]; then
- if ! pgrep -u "$USER" ssh-agent > /dev/null; then
- ssh-agent > ~/.ssh-agent-thing
- fi
- if [[ ! "$SSH_AUTH_SOCK" ]]; then
- eval "$(<~/.ssh-agent-thing)"
- fi
-fi
-
-# footenote: when on a foreign distro and using Xfce, don't forget to
-# disable its auto-start of gpg- and ssh-agent, by issuing
-# xfconf-query -c xfce4-session -p /startup/ssh-agent/enabled -n -t bool -s false
-# xfconf-query -c xfce4-session -p /startup/gpg-agent/enabled -n -t bool -s false
-# see https://docs.xfce.org/xfce/xfce4-session/advanced#ssh_and_gpg_agents
-# also, MATE does something similar with gnome-keyring-daemon:
-# http://william.shallum.net/random-notes/disabling-gnome-keyring-daemon-ssh-agent-on-mate-desktop
-
-export PATH="$HOME/.cargo/bin:$PATH"
-#+end_src
-
-*** per-host profiles
-
-Host-specific profiles, sourced from =~/.profile=. Each
-=~/.config/profiles/HOST= file will be sourced on the machine with
-=hostname= of =HOST=.
-
-**** chaman
-:PROPERTIES:
-:header-args+: :tangle ~/.config/profiles/chaman
-:END:
-
-#+begin_src sh
-export IS_GUIX_SYSTEM=true
-
-if [ -x "$(command -v xinput)" ]; then
- xinput --set-prop "TPPS/2 IBM TrackPoint" 'libinput Accel Speed' -0.4
-fi
-
-setxkbmap \
- -layout us,ir \
- -option ctrl:nocaps \
- -option grp:shifts_toggle
-
-xmodmap -e "keysym Menu = Super_R"
+This file contains some of the system-level (global) configuration
+files for various programs I use.
-xsetroot -cursor_name left_ptr
-xset r rate 200 45
-xset b off
-#+end_src
-
-**** darrud
-:PROPERTIES:
-:header-args+: :tangle ~/.config/profiles/darrud
-:END:
-
-#+begin_src sh
-export INFOPATH="$HOME/usr/local/share/info${INFOPATH:+:}$INFOPATH"
-#+end_src
-
-**** langa
-:PROPERTIES:
-:header-args+: :tangle ~/.config/profiles/langa
-:END:
-
-#+begin_src sh
-export XDG_DATA_DIRS="/usr/share/mate:/usr/local/share/:/usr/share/"
-#+end_src
-
-** redshift
-:PROPERTIES:
-:header-args+: :tangle ~/.config/redshift.conf :comments none
-:END:
-
-#+begin_src conf
-; Global settings for redshift
-[redshift]
-; Set the day and night screen temperatures (Neutral is 6500K)
-;temp-day=5700
-;temp-night=3500
-
-;temp-day=6500
-temp-day=6200
-;temp-night=4800
-;temp-night=5000
-;temp-night=4500
-temp-night=4000
-
-; Enable/Disable a smooth transition between day and night
-; 0 will cause a direct change from day to night screen temperature.
-; 1 will gradually increase or decrease the screen temperature.
-transition=1
-
-; Set the screen brightness. Default is 1.0.
-;brightness=0.9
-; It is also possible to use different settings for day and night
-; since version 1.8.
-;brightness-day=0.7
-;brightness-night=0.4
-; Set the screen gamma (for all colors, or each color channel
-; individually)
-;gamma=0.8
-;gamma=1.0
-;gamma=0.8:0.7:0.8
-; This can also be set individually for day and night since
-; version 1.10.
-;gamma-day=0.8:0.7:0.8
-;gamma-night=0.6
-
-; Set the location-provider: 'geoclue2' or 'manual'
-; type 'redshift -l list' to see possible values.
-; The location provider settings are in a different section.
-;location-provider=manual
-location-provider=geoclue2
-
-; Set the adjustment-method: 'randr', 'vidmode'
-; type 'redshift -m list' to see all possible values.
-; 'randr' is the preferred method, 'vidmode' is an older API.
-; but works in some cases when 'randr' does not.
-; The adjustment method settings are in a different section.
-adjustment-method=randr
-
-; Configuration of the location-provider:
-; type 'redshift -l PROVIDER:help' to see the settings.
-; ex: 'redshift -l manual:help'
-; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
-; are negative numbers.
-;[manual]
-;lat=48.1
-;lon=11.6
-
-; Configuration of the adjustment-method
-; type 'redshift -m METHOD:help' to see the settings.
-; ex: 'redshift -m randr:help'
-; In this example, randr is configured to adjust screen 1.
-; Note that the numbering starts from 0, so this is actually the
-; second screen. If this option is not specified, Redshift will try
-; to adjust _all_ screens.
-;[randr]
-;screen=1
-#+end_src
-
-** signature
-:PROPERTIES:
-:header-args+: :tangle ~/.signature
-:END:
-
-My email signature.
-
-#+begin_src
-https://bndl.org
-Free Software activist | GNU maintainer & webmaster
-GPG: BE62 7373 8E61 6D6D 1B3A 08E8 A21A 0202 4881 6103
-#+end_src
-
-** systemd
+* systemd
Keep boot messages on tty1 (see [[https://wiki.archlinux.org/index.php/getty#Have_boot_messages_stay_on_tty1][here]])
TTYVTDisallocate=no
#+end_src
-** TLP
+* TLP
*** darrud
#DEVICES_TO_DISABLE_ON_UNDOCK=""
#+end_src
-** Tridactyl
-:PROPERTIES:
-:header-args+: :tangle ~/.config/tridactyl/tridactylrc
-:END:
-
-#+begin_src conf
-bind n scrollline 2
-bind p scrollline -2
-
-bind 0 scrollto 0 x
-bind - scrollto 100 x
-
-bind P tabprev
-bind N tabnext
-
-bind d scrollpage 0.5
-bind u scrollpage -0.5
-unbind <C-d>
-unbind <C-u>
-
-bind x tabclose
-bind X undo
-bind <C-S> stop
-
-bind gd tabduplicate
-bind gw tabdetach
-
-bind O fillcmdline bmarks
-
-bind ;<Space> fillcmdline_notrail
-
-unbind <C-f>
-
-set hintfiltermode vimperator-reflow
-set hintnames numeric
-set urlparenttrailingslash false
-
-set browser abrowser
-" set newtab https://bandali.eu.org
-
-seturl warrior.uwaterloo.ca noiframe true
-
-" autocmd DocStart www.reddit.com js tri.excmds.urlmodify("-t", "www", "old")
-#+end_src
-
-** X
-
-*** xinit
-:PROPERTIES:
-:header-args+: :tangle ~/.xinitrc
-:END:
-
-#+begin_src sh
-[ -f ~/.Xresources ] && xrdb -merge ~/.Xresources
-#+end_src
-
-*** X resources
-
-#+begin_src conf-xdefaults :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
-#include ".Xresources.d/fonts"
-#include ".Xresources.d/emacs"
-#include ".Xresources.d/rxvt-unicode"
-#+end_src
-
-**** emacs
-:PROPERTIES:
-:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
-:END:
-
-#+begin_src conf-xdefaults
-Emacs.menuBar: off
-Emacs.toolBar: off
-Emacs.verticalScrollBars: off
-Emacs.cursorBlink: off
-Emacs.FontBackend: ftcrhb,x
-!Emacs.FontBackend: xft,x
-! Emacs.font: Ubuntu Mono-12
-! Emacs.font: Triplicate T4C-11
-! Emacs.font: Ubuntu Mono-10.5
-! Emacs.font: Ubuntu Mono-12
-! Emacs.font: Iosevka-11
-
-! Emacs.font: Fira Mono:size=15
-! Emacs.font: DejaVu Sans Mono:size=15
-! Emacs.font: Inconsolata:size=17
-! Emacs.font: Inconsolata:size=16
-! Emacs.font: Inconsolata LGC:size=14
-! Emacs.font: Source Code Pro Medium-10.5
-Emacs.font: Source Code Pro Medium:size=14
-!Emacs.font: Vazir:size=14
-! Emacs.font: Ubuntu Mono:size=16
-! Emacs.font: Iosevka:size=16
-#+end_src
-
-**** fonts
-:PROPERTIES:
-:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
-:END:
-
-#+begin_src conf-xdefaults
-Xft.lcdfilter: lcddefault
-Xft.antialias: true
-Xft.autohint: 0
-Xft.hinting: true
-Xft.hintstyle: hintslight
-! Xft.hintstyle: hintfull
-Xft.rgba: rgb
-Xft.dpi: 96
-#+end_src
-
-**** rxvt-unicode
-:PROPERTIES:
-:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
-:END:
-
-#+begin_src conf-xdefaults
-! Font
-URxvt.font: xft:source code pro:pixelsize=14:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
-URxvt.boldFont: xft:source code pro:semibold:pixelsize=14:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
-URxvt.italicFont: xft:source code pro:italic:pixelsize=14:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
-URxvt.bolditalicFont: xft:source code pro:semibold:italic:pixelsize=14:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
-
-URxvt.xftAntialias: true
-URxvt.letterSpace: -1
-
-!URxvt.depth: 0
-!URxvt.loginShell: true
-!URxvt*buffered: false
-URxvt.saveLines: 100000
-URxvt.internalBorder: 3
-URxvt.lineSpace: 0
-URxvt.scrollBar: false
-URxvt.scrollStyle: rxvt
-URxvt*scrollTtyOutput: false
-URxvt*scrollWithBuffer: true
-URxvt*scrollTtyKeypress: true
-URxvt.keysym.Shift-Up: command:\033]720;1\007
-URxvt.keysym.Shift-Down: command:\033]721;1\007
-
-URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select
-URxvt.url-select.launcher: firefox
-URxvt.url-select.underline: true
-URxvt.keysym.M-u: perl:url-select:select_next
-URxvt.keysym.M-Escape: perl:keyboard-select:activate
-URxvt.keysym.M-s: perl:keyboard-select:search
-URxvt.url-launcher: /usr/bin/abrowser
-URxvt.matcher.button: 1
-! URxvt.iso14755: false
-! URxvt.iso14755_53: false
-! URxvt.keysym.M-c: perl:clipboard:copy
-! URxvt.keysym.M-v: perl:clipboard:paste
-URxvt.keysym.M-c: eval:selection_to_clipboard
-URxvt.keysym.M-v: eval:paste_clipboard
-URxvt.keysym.C-A-V: perl:clipboard:paste_escaped
-! URxvt.keysym.Shift-Control-C: eval:selection_to_clipboard
-! URxvt.keysym.Shift-Control-V: eval:paste_clipboard
-URxvt.keysym.C-Up: font-size:increase
-URxvt.keysym.C-Down: font-size:decrease
-URxvt.keysym.C-S-Up: font-size:incglobal
-URxvt.keysym.C-S-Down: font-size:decglobal
-URxvt.keysym.C-equal: font-size:reset
-!URxvt.keysym.C-question: font-size:show
-
-!URxvt.iconFile: /usr/share/icons/elementary-xfce/apps/48/terminal.png
-
-!urxvt*foreground: white
-!urxvt*background: black
-
-!*color0: #2E3436
-!*color1: #a40000
-!*color2: #4E9A06
-!*color3: #C4A000
-!*color4: #3465A4
-!*color5: #75507B
-!*color6: #ce5c00
-!*color7: #babdb9
-!*color8: #555753
-!*color9: #EF2929
-!*color10: #8AE234
-!*color11: #FCE94F
-!*color12: #729FCF
-!*color13: #AD7FA8
-!*color14: #fcaf3e
-!*color15: #EEEEEC
-
-!URxvt.foreground: #C8C8C8
-!URxvt.background: #FFFFFF
-
-!! black
-!*color0: #2E3436
-!*color8: #555753
-!! red
-!*color1: #a40000
-!*color9: #EF2929
-!! green
-!*color2: #4E9A06
-!*color10: #8AE234
-!! yellow
-!*color3: #C4A000
-!*color11: #FCE94F
-!! blue
-!*color4: #3465A4
-!*color12: #729FCF
-!! purple
-!*color5: #75507B
-!*color13: #AD7FA8
-!! orange (replaces cyan)
-!*color6: #ce5c00
-!*color14: #fcaf3e
-!! white
-!*color7: #babdb9
-!*color15: #EEEEEC
-
-
-! ! Solarized
-! ! Base16 Solarized Light
-! ! Scheme: Ethan Schoonover (http://ethanschoonover.com/solarized)
-
-! #define base00 #fdf6e3
-! #define base01 #eee8d5
-! #define base02 #93a1a1
-! #define base03 #839496
-! #define base04 #657b83
-! #define base05 #586e75
-! #define base06 #073642
-! #define base07 #002b36
-! #define base08 #dc322f
-! #define base09 #cb4b16
-! #define base0A #b58900
-! #define base0B #859900
-! #define base0C #2aa198
-! #define base0D #268bd2
-! #define base0E #6c71c4
-! #define base0F #d33682
-
-! *foreground: base05
-! #ifdef background_opacity
-! *background: [background_opacity]base00
-! #else
-! *background: base00
-! #endif
-! *cursorColor: base05
-
-! *color0: base00
-! *color1: base08
-! *color2: base0B
-! *color3: base0A
-! *color4: base0D
-! *color5: base0E
-! *color6: base0C
-! *color7: base05
-
-! *color8: base03
-! *color9: base08
-! *color10: base0B
-! *color11: base0A
-! *color12: base0D
-! *color13: base0E
-! *color14: base0C
-! *color15: base07
-
-! ! Note: colors beyond 15 might not be loaded (e.g., xterm, urxvt),
-! ! use 'shell' template to set these if necessary
-! *color16: base09
-! *color17: base0F
-! *color18: base01
-! *color19: base02
-! *color20: base04
-! *color21: base06
-
-
-! Tango colour theme for rxvt-unicode
-URxvt.background: #FFFFFF
-URxvt.foreground: #000000
-
-! Black
-URxvt.color0: #2E3436
-URxvt.color8: #757773
-
-! Red
-URxvt.color1: #CC0000
-URxvt.color9: #EF2929
-
-! Green
-URxvt.color2: #4E9A06
-URxvt.color10: #8AE234
-
-! Yellow
-URxvt.color3: #C4A000
-URxvt.color11: #FCE94F
-
-! Blue
-URxvt.color4: #3465A4
-URxvt.color12: #729FCF
-
-! Magenta
-URxvt.color5: #75507B
-URxvt.color13: #AD7FA8
-
-!! Cyan
-!URxvt.color6: #06989A
-!URxvt.color14: #34E2E2
-! orange (replaces cyan)
-,,*color6: #ce5c00
-,,*color14: #fcaf3e
-
-! White
-URxvt.color7: #D3D7CF
-URxvt.color15: #EEEEEC
-#+end_src
-
-*** ~/.xsession
-:PROPERTIES:
-:header-args+: :tangle ~/.xsession :tangle-mode (identity #o755)
-:END:
-
-For custom session on Debian. See https://wiki.debian.org/Xsession.
-
-#+begin_src sh
-if [ -f "$HOME/.xinitrc" ]; then
- . "$HOME/.xinitrc"
-fi
-
-[ -f "/usr/lib/x86_64-linux-gnu/xfce4/notifyd/xfce4-notifyd" ] && /usr/lib/x86_64-linux-gnu/xfce4/notifyd/xfce4-notifyd &
-[ -x "$(command -v light-locker)" ] && light-locker --lock-on-suspend &
-[ -x "$(command -v pasystray)" ] && pasystray -a &
-[ -x "$(command -v nm-applet)" ] && nm-applet &
-[ -x "$(command -v compton)" ] && compton &
-[ -x "$(command -v dunst)" ] && dunst &
-[ -x "$(command -v emacs)" ] && exec ssh-agent exwm -ib 0
-#+end_src
-
-*** ~/.xsessionrc
-:PROPERTIES:
-:header-args+: :tangle ~/.xsessionrc
-:END:
-
-#+begin_src sh
-if [ -f "$HOME/.profile" ]; then . "$HOME/.profile"; fi
-#+end_src
-
-** XDG
-:PROPERTIES:
-:header-args+: :tangle ~/.config/user-dirs.dirs
-:END:
-
-#+begin_src conf
-XDG_DESKTOP_DIR="$HOME/Desktop"
-XDG_DOCUMENTS_DIR="$HOME/usr/doc"
-XDG_DOWNLOAD_DIR="$HOME/usr/dl"
-XDG_MUSIC_DIR="$HOME/usr/music"
-XDG_PICTURES_DIR="$HOME/usr/pic"
-XDG_PUBLICSHARE_DIR="$HOME/usr/pub"
-XDG_TEMPLATES_DIR="$HOME/usr/temp"
-XDG_VIDEOS_DIR="$HOME/usr/vid"
-#+end_src
-
-** zathura
-:PROPERTIES:
-:header-args+: :tangle ~/.config/zathura/zathurarc
-:END:
-
-#+begin_src conf
-set smooth-scroll true
-set selection-clipboard clipboard
-set zoom-step 05
-set default-bg "#272727"
-set statusbar-bg "#272727"
-set inputbar-bg "#373737"
-set window-title-basename true
-set statusbar-home-tilde true
-
-map <Return> scroll down
-map <A-Return> scroll up
-
-map H jumplist backward
-map L jumplist forward
-
-map [normal] i toggle_index
-map [index] i toggle_index
-map [index] q toggle_index
-#+end_src
-
-* Scripts
-
-This section contains various useful scripts including ones used by
-the programs above. For instance, =toggle-tablet= for switching to
-and from tablet mode on my X220T, =toggle-presentation-mode= for
-toggling Xfce's presentation mode which keeps the screen awake, and
-=rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
-exact brightness value.
-
-** battery-percentage-time
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/sh"
-:END:
-
-#+begin_src sh :tangle no
-dbus_send() {
- label=$1
- dbus-send --print-reply=literal --system \
- --dest=org.freedesktop.UPower \
- /org/freedesktop/UPower/devices/battery_BAT0 \
- org.freedesktop.DBus.Properties.Get \
- string:org.freedesktop.UPower.Device \
- string:"${label}" | awk '{print $3}'
-}
-
-perc=$(dbus_send 'Percentage')
-state=$(dbus_send 'State')
-
-if [ "$state" -eq 2 ]; then # Discharging
- secs=$(dbus_send 'TimeToEmpty')
-elif [ "$state" -eq 1 ]; then # Charging
- secs=$(dbus_send 'TimeToFull')
-fi
-
-printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60))
-#+end_src
-
-** emcl
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/emcl :shebang "#!/bin/sh"
-:END:
-
-#+begin_src sh
-exec emacsclient --alternate-editor="" -c "$@"
-#+end_src
-
-** my-i3status
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/my-i3status :shebang "#!/usr/bin/env python2"
-:END:
-
-#+begin_src python
-# -*- coding: utf-8 -*-
-
-# This script is a simple wrapper which prefixes each i3status line with custom
-# information. It is based on:
-# https://github.com/i3/i3status/blob/master/contrib/wrapper.py
-#
-# In ~/.i3status.conf, add the following line:
-# output_format = "i3bar"
-# in the 'general' section.
-# Then, in ~/.config/i3/config or ~/.config/sway/config add:
-# status_command i3status | my-i3status.py
-# in the 'bar' section. Make sure my-i3status.py is in $PATH.
-#
-# © 2012 Valentin Haenel <valentin.haenel@gmx.de>
-# © 2018 Amin Bandali <bandali@gnu.org>
-#
-# This program is free software. It comes without any warranty, to the extent
-# permitted by applicable law. You can redistribute it and/or modify it under
-# the terms of the Do What The Fuck You Want To Public License (WTFPL), Version
-# 2, as published by Sam Hocevar. See http://sam.zoy.org/wtfpl/COPYING for more
-# details.
-
-import sys
-import json
-import os
-
-def get_nosleep():
- """ Return true if ~/.nosleep exists. """
- return os.path.isfile(os.path.expanduser("~/.nosleep"))
-
-def print_line(message):
- """ Non-buffered printing to stdout. """
- sys.stdout.write(message + '\n')
- sys.stdout.flush()
-
-def read_line():
- """ Interrupted respecting reader for stdin. """
- # try reading a line, removing any extra whitespace
- try:
- line = sys.stdin.readline().strip()
- # i3status sends EOF, or an empty line
- if not line:
- sys.exit(3)
- return line
- # exit on ctrl-c
- except KeyboardInterrupt:
- sys.exit()
-
-if __name__ == '__main__':
- # Skip the first line which contains the version header.
- print_line(read_line())
-
- # The second line contains the start of the infinite array.
- print_line(read_line())
-
- while True:
- line, prefix = read_line(), ''
- # ignore comma at start of lines
- if line.startswith(','):
- line, prefix = line[1:], ','
-
- if get_nosleep():
- j = json.loads(line)
- # insert information into the start of the json, but could be anywhere
- j.insert(0, {'full_text' : '•', 'name' : 'nosleep'})
- # and echo back new encoded json
- print_line(prefix+json.dumps(j))
- else:
- print_line(prefix+line)
-#+end_src
-
-** rofi-light
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/sh"
-:END:
-
-#+begin_src sh
-cur=$(light -G)
-val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 12)
-[ -n "$val" ] && light -S "$val"
-#+end_src
-
-** rofi-remmina
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/rofi-remmina :shebang "#!/usr/bin/env python2"
-:END:
-
-#+begin_src python
-import ConfigParser
-import os
-from subprocess import Popen, PIPE
-
-remmina_dir = os.path.expanduser("~/.local/share/remmina")
-
-fdict = dict()
-
-for f in os.listdir(remmina_dir):
- fp = os.path.join(remmina_dir, f)
- c = ConfigParser.ConfigParser()
- c.read(fp)
- n = c.get('remmina', 'name')
- fdict[n] = fp
-
-lines = max(min(15, len(fdict)), 1);
-width = len(max(fdict.keys(), key=len))
-rofi = Popen(["rofi", "-i", "-dmenu", \
- "-l", str(lines), "-width", str(width), \
- "-p", "connection"], stdout=PIPE, stdin=PIPE)
-selected = rofi.communicate("\n" \
- .join(fdict.keys()) \
- .encode("utf-8"))[0] \
- .decode("utf-8") \
- .strip()
-rofi.wait()
-
-r = Popen(["remmina", "-c", fdict[selected]])
-r.wait()
-#+end_src
-
-** toggle-presentation-mode
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/sh"
-:END:
-
-#+begin_src sh
-xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
-#+end_src
-
-** toggle-tablet
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/sh"
-:END:
-
-#+begin_src sh
-# This script toggles between a 'normal' mode and a 'tablet' mode, doing
-# a few things:
-
-# - rotates the screen using =xrandr=, so that rotating the physical
-# display of my X220t would have the laptop's battery on the right
-# hand side,
-# - enables touch screen,
-# - properly rotates the stylus pen and touch screen pointers, and
-# - toggles between RGB and Vertical BGR sub-pixel order.
-
-case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
- 0) # Screen is not rotated, we should rotate it right (90°)
- xrandr -o 3
- xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
- xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
- xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
- xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
- ;;
- 1) # Currently top is rotated right, we should set it normal (0°)
- xrandr -o 0
- xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
- xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
- xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
- xfconf-query -c xsettings -p /Xft/RGBA -s rgb
- ;;
- ,*)
- echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
- exit 1
- ;;
-esac
-#+end_src
-
-** volume-info
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh"
-:END:
-
-#+begin_src sh
-cur_vol=$(pamixer --get-volume)
-
-if [ $(pamixer --get-mute) = true ]; then
- printf 'mt \n' "$cur_vol"
-else
- printf '%02d \n' "$cur_vol"
-fi
-#+end_src
-
-** zathura-sync
-:PROPERTIES:
-:header-args+: :tangle ~/.local/bin/zathura-sync :shebang "#!/bin/sh"
-:END:
-
-#+begin_src sh
-pos="$1"
-pdffile="$2"
-zathura --synctex-forward "$pos" "$pdffile" || \
- (
- zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
- sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
-#+end_src
projects / ~bandali / configs / commitdiff