[rc/{mpd,msmtp,ncmpcpp}] migrate to new literate setup
[~bandali/configs] / rc.org
CommitLineData
08146d0e
AB
1#+title: rc.org
2#+property: header-args :comments link :mkdirp yes :results silent
3
4* About
5
6This org file contains the configuration files of pretty much every
7program I use. The files are tangled (i.e. exported, or derived) from
8this file using =org-babel=.
9
10Note: This file is best viewed inside Emacs with org mode.
11
12* Configs
13
b13e2dc1
AB
14This section contains the configuration files (dotfiles) of various
15programs I use.
16
17** [[https://github.com/afewmail/afew][afew]]
18:PROPERTIES:
19:header-args+: :tangle ~/.config/afew/config
20:END:
21
22#+begin_quote
23an initial tagging script for notmuch mail
24#+end_quote
25
26#+begin_src conf
27# This is the default filter chain
28[SpamFilter]
29#[ClassifyingFilter]
30[KillThreadsFilter]
31#[ListMailsFilter]
32[ArchiveSentMailsFilter]
33sent_tag = sent
34[InboxFilter]
35
36#[Filter.1]
37#query = 'folder:amin/lists/.haskell-cafe'
38#tags = +lists;+lists/haskell-cafe
39#message = lists/haskell-cafe
40
41#[Filter.2]
42#query = 'folder:amin/lists/.haskell-weekly'
43#tags = +lists;+lists/haskell-weekly
44#message = lists/haskell-weekly
45
46#[Filter.3]
47#query = 'folder:amin/lists/.hackernewsletter'
48#tags = +lists;+lists/hackernewsletter
49#message = lists/hackernewsletter
50
51
52#[FolderNameFilter]
53#folder_blacklist = Inbox
54#maildir_separator = /.
55#folder_transforms = Drafts:draft Junk:spam Trash:deleted Sent:sent Archive:archive lists/haskell-cafe:lists/haskell-cafe
56#+end_src
57
58** bspwm
59
60*** bspwmrc
61:PROPERTIES:
62:header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
63:END:
64
65#+begin_src sh
66sxhkd &
67sh ~/.fehbg &
68xfce4-panel -d &
69#compton &
70sleep 0.5 && pasystray --notify=all &
71
72bspc monitor -d I II III IV V VI VII VIII IX X
73#bspc monitor eDP-1 -d I II III IV V
74#bspc monitor HDMI-1 -d VI VII VIII IX X
75
76#bspc config border_width 2
77#bspc config window_gap 8
78bspc config window_gap 0
79
80bspc config bottom_padding 26
81
82bspc config split_ratio 0.52
83bspc config borderless_monocle true
84bspc config gapless_monocle true
85bspc config click_to_focus button1
86bspc config directional_focus_tightness low
87
88bspc rule -a Firefox desktop='^1' follow=on
89bspc rule -a Nightly desktop='^1' follow=on
90bspc rule -a Emacs desktop='^2' state=tiled follow=on
91#bspc rule -a Chromium desktop='^4' follow=on
92bspc rule -a URxvt state=floating
93bspc rule -a URxvt:tiled state=tiled
94bspc rule -a Connman-gtk state=floating
95bspc rule -a Xfce4-panel state=floating
96bspc rule -a TelegramDesktop state=floating
97bspc rule -a Ec state=floating
98bspc rule -a Pavucontrol state=floating
99bspc rule -a Eog state=floating
100bspc rule -a Seahorse state=floating
101bspc rule -a mpv state=floating
102bspc rule -a Evince state=floating
103bspc rule -a Meld state=floating
104bspc rule -a Autokey-gtk state=floating
105bspc rule -a Mousepad state=floating
106bspc rule -a Wrapper-1.0 state=floating
107bspc rule -a File-roller state=floating
108bspc rule -a Gnome-disks state=floating
109bspc rule -a Termite state=floating
110bspc rule -a Termite:tiled state=tiled
111bspc rule -a Thunderbird:Calendar state=floating
112bspc rule -a Audacity state=floating
113bspc rule -a Proof state=floating # pvs x-show-proof
114bspc rule -a Nm-connection-editor state=floating
115bspc rule -a Wire state=floating
116bspc rule -a discord state=floating
117bspc rule -a X2goclient state=floating
118bspc rule -a SimpleScreenRecorder state=floating
119bspc rule -a Gimp state=floating
120bspc rule -a Wrapper-2.0 state=floating
121bspc rule -a Zathura state=tiled
122#+end_src
123
124*** sxhkdrc
125:PROPERTIES:
126:header-args+: :tangle ~/.config/sxhkd/sxhkdrc
127:END:
128
129#+begin_src conf
130#
131# wm independent hotkeys
132#
133
134# terminal emulator
135super + {_,shift} + Return
136 urxvt{_, -name tiled}
137
138#super + {_,shift} + Return
139# termite{_, --name=tiled}
140
141# program launcher
142super + space
143 rofi -show run -display-run '> ' -display-window ' 🗔 '
144
145super + alt + space
146 xfce4-popup-whiskermenu
147
148# window finder
149super + backslash
150 rofi -show window -display-run '> ' -display-window ' 🗔 '
151
152# password manager
153alt + space
154 rofi-pass
155
156# firefox
157#super + r
158# firefox
159
160# chromium
161#super + c
162# chromium -incognito
163
164# emacs
165super + e
166 emacs
167
168# make sxhkd reload its configuration files:
169super + Escape
170 pkill -USR1 -x sxhkd
171
172# volume {up,down}
173XF86Audio{Raise,Lower}Volume
174 pamixer --allow-boost --{in,de}crease 5
175
176# mute
177XF86AudioMute
178 pamixer --toggle-mute
179
180# playback control
181XF86Audio{Play,Prev,Next}
182 mpc {toggle,prev,next}
183
184# lock the screen
185super + shift + q
186 light-locker-command -l
187
188# Toggle keyboard layout
189super + F7
190 toggle-layout
191
192# Toggle Xfce presentation mode
193XF86LaunchB
194 toggle-presentation-mode
195
196# monitor brightness
197XF86MonBrightness{Up,Down}
198 light -{A,U} 5
199
200super + apostrophe
201 rofi-light
202
203# keyboard brightness
204#XF86KbdBrightness{Up,Down}
205# kbdlight {up,down}
206
207#
208# bspwm hotkeys
209#
210
211# quit bspwm normally
212super + alt + Escape
213 bspc quit
214
215# close and kill
216super + {w,q}
217 bspc node -{c,k}
218
219# alternate between the tiled and monocle layout
220super + m
221 bspc desktop -l next
222
223# send the newest marked node to the newest preselected node
224super + y
225 bspc node newest.marked.local -n newest.!automatic.local
226
227# swap the current node and the biggest node
228super + g
229 bspc node -s biggest
230
231#
232# state/flags
233#
234
235# set the window state
236super + {t,shift + t,s,f}
237 bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
238
239# set the node flags
240super + ctrl + {m,x,y,z}
241 bspc node -g {marked,locked,sticky,private}
242
243#
244# focus/swap
245#
246
247# focus the node in the given direction
248super + {_,shift + }{h,j,k,l}
249 bspc node -{f,s} {west,south,north,east}
250
251# focus the node for the given path jump
252super + {p,b,comma,period}
253 bspc node -f @{parent,brother,first,second}
254
255# focus the next/previous node in the current desktop
256super + {_,shift + }c
257 bspc node -f {next,prev}.local
258
259# focus the next/previous desktop in the current monitor
260super + bracket{left,right}
261 bspc desktop -f {prev,next}.local
262
263# send to next/prev desktop
264super + shift + bracket{left,right}
265 bspc node -d {prev,next} --follow
266
267# focus the last node/desktop
268super + {grave,Tab}
269 bspc {node,desktop} -f last
270
271# focus the older or newer node in the focus history
272super + {o,i}
273 bspc wm -h off; \
274 bspc node {older,newer} -f; \
275 bspc wm -h on
276
277# focus or send to the given desktop
278super + {_,shift + }{1-9,0}
279 bspc {desktop -f,node -d} '^{1-9,10}'
280
281#
282# preselect
283#
284
285# preselect the direction
286super + ctrl + {h,j,k,l}
287 bspc node -p {west,south,north,east}
288
289# preselect the ratio
290super + ctrl + {1-9}
291 bspc node -o 0.{1-9}
292
293# cancel the preselection for the focused node
294super + ctrl + space
295 bspc node -p cancel
296
297# cancel the preselection for the focused desktop
298super + ctrl + shift + space
299 bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
300
301#
302# move/resize
303#
304
305# expand a window by moving one of its side outward
306super + alt + {h,j,k,l}
307 bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
308
309# contract a window by moving one of its side inward
310super + alt + shift + {h,j,k,l}
311 bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
312
313# move a floating window
314super + {Left,Down,Up,Right}
315 bspc node -v {-20 0,0 20,0 -20,20 0}
316
317#alt + bracket{left,right}
318# xdotool key --clearmodifiers ctrl+Page_{Up,Down}
319#+end_src
320
321** compton
322:PROPERTIES:
323:header-args+: :tangle ~/.config/compton.conf
324:END:
325
326#+begin_src conf
327# Shadow
328shadow = false; # Enabled client-side shadows on windows.
329no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows.
330no-dnd-shadow = true; # Don't draw shadows on DND windows.
331clear-shadow = true; # Zero the part of the shadow's mask behind the
332 # window. Fix some weirdness with ARGB windows.
333shadow-radius = 5; # The blur radius for shadows. (default 12)
334shadow-offset-x = -5; # The left offset for shadows. (default -15)
335shadow-offset-y = -5; # The top offset for shadows. (default -15)
336# shadow-opacity = 0.7; # The translucency for shadows. (default .75)
337# shadow-red = 0.0; # Red color value of shadow. (0.0 - 1.0, defaults to 0)
338# shadow-green = 0.0; # Green color value of shadow. (0.0 - 1.0, defaults to 0)
339# shadow-blue = 0.0; # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
340shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ]; # Exclude conditions for shadows.
341# shadow-exclude = "n:e:Notification";
342#shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
343shadow-ignore-shaped = true; # Avoid drawing shadow on all shaped windows
344 # (see also: --detect-rounded-corners)
345
346# Opacity
347menu-opacity = 1.0; # The opacity for menus. (default 1.0)
348#inactive-opacity = 0.9; # Default opacity of inactive windows. (0.0 - 1.0)
349# active-opacity = 0.8; # Default opacity for active windows. (0.0 - 1.0)
350frame-opacity = 1.0; # Opacity of window titlebars and borders. (0.1 - 1.0)
351# inactive-opacity-override = true; # Let inactive opacity set by 'inactive-opacity' overrides
352 # value of _NET_WM_OPACITY. Bad choice.
353alpha-step = 0.06; # XRender backend: Step size for alpha pictures. Increasing
354 # it may result in less X resource usage,
355 # Yet fading may look bad.
356#inactive-dim = 0.5; # Dim inactive windows. (0.0 - 1.0)
357#inactive-dim-fixed = true; # Do not let dimness adjust based on window opacity.
358# blur-background = true; # Blur background of transparent windows.
359 # Bad performance with X Render backend.
360 # GLX backend is preferred.
361# blur-background-frame = true; # Blur background of opaque windows with transparent
362 # frames as well.
363blur-background-fixed = true; # Do not let blur radius adjust based on window opacity.
364blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
365 # Exclude conditions for background blur.
366
367# Fading
368fading = false; # Fade windows during opacity changes.
369fade-delta = 3; # The time between steps in a fade in milliseconds. (default 10).
370fade-in-step = 0.03; # Opacity change between steps while fading in. (default 0.028).
371fade-out-step = 0.03; # Opacity change between steps while fading out. (default 0.03).
372# no-fading-openclose = true; # Avoid fade windows in/out when opening/closing.
373fade-exclude = [ ]; # Exclude conditions for fading.
374
375# Other
376backend = "glx" # Backend to use: "xrender" or "glx". GLX backend is typically
377 # much faster but depends on a sane driver.
378mark-wmwin-focused = true; # Try to detect WM windows and mark them as active.
379mark-ovredir-focused = true; # Mark all non-WM but override-redirect windows active (e.g. menus).
380use-ewmh-active-win = true; # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
381 # instead of using FocusIn/Out events. Usually more reliable but
382 # depends on a EWMH-compliant WM.
383detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
384detect-client-opacity = true; # Detect _NET_WM_OPACITY on client windows, useful for window
385 # managers not passing _NET_WM_OPACITY of client windows to frame
386 # windows.
387refresh-rate = 0; # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
388vsync = "drm"; # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
389 # See man page for more details.
390dbe = false; # Enable DBE painting mode. Rarely needed.
391paint-on-overlay = true; # Painting on X Composite overlay window. Recommended.
392sw-opti = false; # Limit compton to repaint at most once every 1 / refresh_rate.
393 # Incompatible with certain VSync methods.
394unredir-if-possible = false; # Unredirect all windows if a full-screen opaque window is
395 # detected, to maximize performance for full-screen windows.
396focus-exclude = [ ]; # A list of conditions of windows that should always be considered
397 # focused.
398detect-transient = true; # Use WM_TRANSIENT_FOR to group windows, and consider windows in
399 # the same group focused at the same time.
400detect-client-leader = true; # Use WM_CLIENT_LEADER to group windows.
401invert-color-include = [ ]; # Conditions for windows to be painted with inverted color.
402
403# GLX backend # GLX backend fine-tune options. See man page for more info.
404glx-no-stencil = true; # Recommended.
405glx-copy-from-front = false; # Useful with --glx-swap-method,
406# glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
407# glx-no-rebind-pixmap = true; # Recommended if it works.
408glx-no-rebind-pixmap = true; # Recommended if it works.
409#glx-swap-method = "4"; # See man page.
410glx-swap-method = "4"; # See man page.
411
412# Window type settings
413wintypes:
414{
415 tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
416 menu = { shadow = false; };
417 dropdown_menu = { shadow = false; };
418 popup_menu = { shadow = false; };
419 utility = { shadow = false; };
420 # fade: Fade the particular type of windows.
421 # shadow: Give those windows shadow
422 # opacity: Default opacity for the type of windows.
423 # focus: Whether to always consider windows of this type focused.
424};
425#+end_src
426
05ab13aa
AB
427** Dunst
428:PROPERTIES:
429:header-args+: :tangle ~/.config/dunst/dunstrc
430:END:
431
432#+begin_src conf
433[global]
434#font = Ubuntu Mono 10.5
435font = Inconsolata 11
436
437# Path to default icons.
438icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
439
440icon_position = left
441# <b>bold</b>
442# <i>italic</i>
443# <s>strikethrough<s/>
444# <u>underline</u>
445markup = full
446# The format of the message. Possible variables are:
447# %a appname
448# %s summary
449# %b body
450# %i iconname (including its path)
451# %I iconname (without its path)
452# %p progress value if set ([ 0%] to [100%]) or nothing
453# Markup is allowed
454format = "<b>%s</b>\n%b"
455# Sort messages by urgency
456sort = yes
457# Show how many messages are currently hidden (because of geometry)
458indicate_hiddenl= no
459# Alignment of message text.
460# Possible values are "left", "center" and "right"
461alignment = center
462# The frequency with wich text that is longer than the notification
463# window allows bounces back and forth.
464# This option conflicts with 'word_wrap'.
465# Set to 0 to disable
466bounce_freq = 3
467# show age of message if message is older than show_age_threshold seconds.
468# set to -1 to disable
469show_age_threshold = -1
470# split notifications into multiple lines if they don't fit into geometry
471word_wrap = yes
472# ignore newlines '\n' in notifications
473ignore_newline = no
474# The geometry of the message window.
475# geometry [{width}]x{height}][+/-{x}+/-{y}]
476# The height is measured in number of notifications everything else in pixels. If the width
477# is omitted but the height is given ("-geometry x2"), the message window
478# expands over the whole screen (dmenu-like). If width is 0,
479# the window expands to the longest message displayed.
480# A positive x is measured from the left, a negative from the
481# right side of the screen. Y is measured from the top and down respectevly.
482# The width can be negative. In this case the actual width is the
483# screen width minus the width defined in within the geometry option.
484#geometry = "410x12-12+12"
485#geometry = "0x0-30-30"
486geometry = "260x12-30-30"
487# The transparency of the window. range: [0; 100]
488# This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
489transparency = 0
490# Don't remove messages, if the user is idle (no mouse or keyboard input)
491# for longer than idle_threshold seconds.
492# Set to 0 to disable.
493idle_threshold = 120
494# Which monitor should the notifications be displayed on.
495monitor = 0
496# Display notification on focused monitor. Possible modes are:
497# mouse: follow mouse pointer
498# keyboard: follow window with keyboard focus
499# none: don't follow anything
500#
501# "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
502# This should be the case for almost all modern windowmanagers.
503#
504# If this option is set to mouse or keyboard, the monitor option will be
505# ignored.
506follow = keyboard
507# should a notification popped up from history be sticky or
508# timeout as if it would normally do.
509sticky_history = yes
510# The height of a single line. If the height is smaller than the font height,
511# it will get raised to the font height.
512# This adds empty space above and under the text.
513line_height = 0
514
515show_indicators = yes
516
517# Draw a line of 'separatpr_height' pixel height between two notifications.
518# Set to 0 to disable
519separator_height = 3
520# padding between text and separator
521padding = 8
522# horizontal padding
523horizontal_padding = 8
524# Define a color for the separator.
525# possible values are:
526# * auto: dunst tries to find a color fitting to the background
527# * foreground: use the same color as the foreground
528# * frame: use the same color as the frame.
529# * anything else will be interpreted as a X color
530separator_color = foreground
531# print a notification on startup
532# This is mainly for error detection, since dbus (re-)starts dunst
533# automatically after a crash.
534startup_notification = false
535# dmenu path
536#dmenu = /usr/bin/dmenu -p dunst:
537dmenu = /usr/bin/rofi -dmenu -p dunst:
538# browser for opening urls in context menu
539browser = /usr/bin/firefox -new-tab
540[frame]
541width = 0
542color = "#377222"
543[shortcuts]
544# shortcuts are specified as [modifier+][modifier+]...key
545# available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
546# and 'mod4' (windows-key)
547# xev might be helpful to find names for keys
548# close notification
549close = ctrl+space
550# close all notifications
551close_all = ctrl+shift+space
552# redisplay last message(s)
553# On the US keyboard layout 'grave' is normally above TAB and left of '1'.
554history = ctrl+shift+h
555# context menu
556context = ctrl+shift+period
557[urgency_low]
558# IMPORTANT: colors have to be defined in quotation marks.
559# Otherwise the '#' and following would be interpreted as a comment.
560background = "#1d2a30"
561foreground = "#71c2af"
562timeout = 3
563[urgency_normal]
564background = "#1d2a30"
565foreground = "#71c2af"
566timeout = 0
567[urgency_critical]
568background = "#1d2a30"
569foreground = "#ff9982"
570timeout = 0
571
572# Every section that isn't one of the above is interpreted as a rules
573# to override settings for certain messages.
574# Messages can be matched by 'appname', 'summary', 'body' or 'icon'
575# and you can override the 'timeout', 'urgency', 'foreground', 'background'
576# and 'format'.
577# Shell-like globbing will get expanded.
578#
579# SCRIPTING
580# you can specify a script that gets run when the rule matches by setting
581# the 'script' option.
582# The script will be called as follows:
583# script appname summary body icon urgency
584# where urgency can be "LOW", "NORMAL" or "CRITICAL".
585#
586# NOTE: if you don't want a notification to be displayed, set the format to ""
587# NOTE: It might be helpful to run dunst -print in a terminal in order to find
588# fitting options for rules.
589#[espeak]
590# summary = "*"
591# script = dunst_espeak.sh
592#[script-test]
593# summary = "*script*"
594# script = dunst_test.sh
595#[ignore]
596## This notification will not be displayed
597# summary = "foobar"
598# format = ""
599#[signed_on]
600# appname = Pidgin
601# summary = "*signed on*"
602# urgency = low
603#
604#[signed_off]
605# appname = Pidgin
606# summary = *signed off*
607# urgency = low
608#
609#[says]
610# appname = Pidgin
611# summary = *says*
612# urgency = critical
613#
614#[twitter]
615# appname = Pidgin
616# summary = *twitter.com*
617# urgency = normal
618#
619[xfpm-backlight]
620 summary = *Brightness*
621 urgency = low
622#+end_src
623
624** Fontconfig
625:PROPERTIES:
626:header-args+: :tangle ~/.config/fontconfig/fonts.conf
627:END:
628
629#+begin_src xml
630<?xml version="1.0"?>
631<!DOCTYPE fontconfig SYSTEM "fonts.dtd">
632<fontconfig>
633 <match target="font">
634 <edit mode="assign" name="rgba">
635 <const>rgb</const>
636 </edit>
637 </match>
638 <match target="font">
639 <edit mode="assign" name="hinting">
640 <bool>true</bool>
641 </edit>
642 </match>
643 <match target="font">
644 <edit mode="assign" name="hintstyle">
645 <const>hintslight</const>
646 </edit>
647 </match>
648 <match target="font">
649 <edit mode="assign" name="antialias">
650 <bool>true</bool>
651 </edit>
652 </match>
653 <match target="font">
654 <edit mode="assign" name="lcdfilter">
655 <const>lcddefault</const>
656 </edit>
657 </match>
658 <dir>~/.fonts</dir>
659
660 <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
661 <alias binding="same">
662 <family>Helvetica</family>
663 <accept>
664 <family>Liberation Sans</family>
665 </accept>
666</alias>
667</fontconfig>
668#+end_src
669
58cbbce2 670** Git
08146d0e
AB
671
672*** gitconfig
673:PROPERTIES:
674:header-args+: :tangle ~/.gitconfig
675:END:
676
677**** user
678#+begin_src conf
679[user]
680 name = Amin Bandali
681 email = amin@aminb.org
682 # signingkey = 4E05246AB0BF7FFB
683#+end_src
684
685**** signing
686#+begin_src conf
687# [commit]
688# gpgsign = true
689# [format]
690# signoff = true
691#+end_src
692
693**** core
694#+begin_src conf
695[core]
696 autocrlf = input # CRLF -> LF on commit
697 editor = emacsclient -t
698 excludesfile = ~/.gitignore_global
699 pager = "less"
700#+end_src
701
702**** gpg
703#+begin_src conf
704[gpg]
705 program = gpg2
706#+end_src
707
708**** alias
709#+begin_src conf
710[alias]
711 git = !exec git # handle nested git calls, e.g. git git status
712 aliases = config --get-regexp '^alias\\.'
713 a = add
714 s = status
715 sl = status --long
716 c = checkout
717 cb = checkout -b
718 b = branch
719 r = rebase
720 p = pull
721 pr = pull --rebase
722 ps = push
723 psf = push --force
724#+end_src
725
726**** color
727#+begin_src conf
728[color]
729 ui = auto
730[color "status"]
731 added = green bold
732 changed = red bold
733 untracked = red bold
734[color "branch"]
735 current = green bold
736 remote = magenta bold
737[color "diff"]
738 new = green bold
739 old = red bold
740#+end_src
741
742**** status
743#+begin_src conf
744[status]
745 # showUntrackedFiles = all
746 short=true
747 branch=true
748#+end_src
749
750**** github
751#+begin_src conf
752[github]
753 user = aminb
754#+end_src
755
756*** gitignore
757:PROPERTIES:
758:header-args+: :tangle ~/.gitignore_global
759:END:
760
761#+begin_src conf
762*.orig
763*.py[co]
764*.sublime-workspace
765*~
766.DS_Store
767*.elc
768*-autoloads.el
769#+end_src
58cbbce2
AB
770
771** Latexmk
772:PROPERTIES:
773:header-args+: :tangle ~/.latexmkrc
774:END:
775
776#+begin_src conf
777$pdf_previewer = "start zathura %O %S";
778$clean_ext = "aux out";
779
780# $pdf_update_method = 4;
781# $pdf_update_command = "zathura %O %S";
782
783# Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
784# by Ctrl+click in the PDF.
785# Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
786# editor.
787# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
788#+end_src
b13e2dc1 789
931a4b06
AB
790** getmail
791
792*** getmailrc
793:PROPERTIES:
794:header-args+: :tangle ~/.getmail/getmailrc
795:END:
796
797#+begin_src conf
798[retriever]
799type = SimplePOP3SSLRetriever
800server = fencepost.gnu.org
801username = aminb
802password_command = ("gpg2", "--no-tty", "-q", "-d", "~/.passwd/gnu.gpg")
803port = 995
804use_apop = True
805
806[destination]
807type = Maildir
808path = ~/mail/gnu/Inbox/
809
810[options]
811delete = True
812#+end_src
813
814*** getmail.service
815:PROPERTIES:
816:header-args+: :tangle ~/.config/systemd/user/getmail.service
817:END:
818
819#+begin_src conf :tangle no
820[Unit]
821Description=getmail service
822
823[Service]
824Type=oneshot
825ExecStart=/usr/bin/getmail
826StandardOutput=syslog
827StandardError=syslog
828#+end_src
829
830*** getmail.timer
831:PROPERTIES:
832:header-args+: :tangle ~/.config/systemd/user/getmail.timer
833:END:
834
835#+begin_src conf :tangle no
836[Unit]
837Description=getmail timer
838
839[Timer]
840OnCalendar=*:0/30
841Persistent=true
842Unit=getmail.service
843
844[Install]
845WantedBy=timers.target
846#+end_src
847
848** GnuPG
849:PROPERTIES:
850:header-args+: :tangle ~/.gnupg/gpg-agent.conf
851:END:
852
853#+begin_src conf
854default-cache-ttl 43200
855max-cache-ttl 43200
856
857default-cache-ttl-ssh 10800
858max-cache-ttl-ssh 10800
859
860# pinentry-program /usr/bin/pinentry-qt
861#+end_src
862
be76c6db
AB
863** GTK
864
865*** gtk-2.0
866:PROPERTIES:
867:header-args+: :tangle ~/.gtkrc-2.0
868:END:
869
870#+begin_src conf
871gtk-theme-name="Greybird"
872gtk-icon-theme-name="Paper"
873gtk-font-name="Ubuntu 10"
874gtk-menu-images=0
875# gtk-key-theme-name = "Emacs"
876#+end_src
877
878*** gtk-3.0
879:PROPERTIES:
880:header-args+: :tangle ~/.config/gtk-3.0/settings.ini
881:END:
882
883#+begin_src conf :tangle no
884[Settings]
885gtk-icon-theme-name = Paper
886# gtk-theme-name = Adwaita
887
888gtk-theme-name = Greybird
889# gtk-theme-name = Arc-Darker
890# gtk-theme-name = Numix-ArchBlue
891
892gtk-font-name = Ubuntu 10
893# gtk-key-theme-name = Emacs
894#+end_src
895
896** isync
897
898*** mbsyncrc
899:PROPERTIES:
900:header-args+: :tangle ~/.mbsyncrc
901:END:
902
903#+begin_src conf
904# Global defaults
905CopyArrivalDate yes
906
907######
908IMAPAccount amin
909Host nix.aminb.org
910User amin@aminb.org
911PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
912SSLType IMAPS
913
914IMAPStore amin-remote
915Account amin
916
917MaildirStore amin-local
918Path ~/mail/amin/
919Inbox ~/mail/amin/Inbox
920SubFolders Verbatim
921
922Channel amin
923Master :amin-remote:
924Slave :amin-local:
925Patterns * !dovecot*
926Create Both
927SyncState *
928
929######
930IMAPAccount uwaterloo
931Host connect.uwaterloo.ca
59027673 932User abandali
be76c6db
AB
933PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
934SSLType IMAPS
935
936IMAPStore uwaterloo-remote
937Account uwaterloo
938
939MaildirStore uwaterloo-local
940Path ~/mail/uwaterloo/
941Inbox ~/mail/uwaterloo/Inbox
942SubFolders Verbatim
943
944Channel uwaterloo
945Master :uwaterloo-remote:
946Slave :uwaterloo-local:
947Patterns * !dovecot*
948Create Both
949SyncState *
950#+end_src
951
952*** mbsync.service
953:PROPERTIES:
954:header-args+: :tangle ~/.config/systemd/user/mbsync.service
955:END:
956
957#+begin_src conf :tangle no
958[Unit]
959Description=mbsync service
960
961[Service]
962Type=oneshot
963ExecStart=/usr/bin/mbsync -Va
964StandardOutput=syslog
965StandardError=syslog
966#+end_src
967
968*** mbsync.timer
969:PROPERTIES:
970:header-args+: :tangle ~/.config/systemd/user/mbsync.timer
971:END:
972
973#+begin_src conf :tangle no
974[Unit]
975Description=mbsync timer
976
977[Timer]
978OnCalendar=*:0/15
979Persistent=true
980Unit=mbsync.service
981
982[Install]
983WantedBy=timers.target
984#+end_src
985
59027673
AB
986** mpd
987:PROPERTIES:
988:header-args+: :tangle ~/.config/mpd/mpd.conf
989:END:
990
991#+begin_src conf
992# An example configuration file for MPD.
993# Read the user manual for documentation: http://www.musicpd.org/doc/user/
994
995
996# Files and directories #######################################################
997#
998# This setting controls the top directory which MPD will search to discover the
999# available audio files and add them to the daemon's online database. This
1000# setting defaults to the XDG directory, otherwise the music directory will be
1001# be disabled and audio files will only be accepted over ipc socket (using
1002# file:// protocol) or streaming files over an accepted protocol.
1003#
1004music_directory "~/usr/music"
1005#
1006# This setting sets the MPD internal playlist directory. The purpose of this
1007# directory is storage for playlists created by MPD. The server will use
1008# playlist files not created by the server but only if they are in the MPD
1009# format. This setting defaults to playlist saving being disabled.
1010#
1011playlist_directory "~/.mpd/playlists"
1012#
1013# This setting sets the location of the MPD database. This file is used to
1014# load the database at server start up and store the database while the
1015# server is not up. This setting defaults to disabled which will allow
1016# MPD to accept files over ipc socket (using file:// protocol) or streaming
1017# files over an accepted protocol.
1018#
1019db_file "~/.mpd/database"
1020#
1021# These settings are the locations for the daemon log files for the daemon.
1022# These logs are great for troubleshooting, depending on your log_level
1023# settings.
1024#
1025# The special value "syslog" makes MPD use the local syslog daemon. This
1026# setting defaults to logging to syslog, otherwise logging is disabled.
1027#
1028log_file "~/.mpd/log"
1029#
1030# This setting sets the location of the file which stores the process ID
1031# for use of mpd --kill and some init scripts. This setting is disabled by
1032# default and the pid file will not be stored.
1033#
1034pid_file "~/.mpd/pid"
1035#
1036# This setting sets the location of the file which contains information about
1037# most variables to get MPD back into the same general shape it was in before
1038# it was brought down. This setting is disabled by default and the server
1039# state will be reset on server start up.
1040#
1041state_file "~/.mpd/state"
1042#
1043# The location of the sticker database. This is a database which
1044# manages dynamic information attached to songs.
1045#
1046sticker_file "~/.mpd/sticker.sql"
1047#
1048###############################################################################
1049
1050
1051# General music daemon options ################################################
1052#
1053# This setting specifies the user that MPD will run as. MPD should never run as
1054# root and you may use this setting to make MPD change its user ID after
1055# initialization. This setting is disabled by default and MPD is run as the
1056# current user.
1057#
1058#user "nobody"
1059#
1060# This setting specifies the group that MPD will run as. If not specified
1061# primary group of user specified with "user" setting will be used (if set).
1062# This is useful if MPD needs to be a member of group such as "audio" to
1063# have permission to use sound card.
1064#
1065#group "nogroup"
1066#
1067# This setting sets the address for the daemon to listen on. Careful attention
1068# should be paid if this is assigned to anything other then the default, any.
1069# This setting can deny access to control of the daemon. Not effective if
1070# systemd socket activiation is in use.
1071#
1072# For network
1073#bind_to_address "any"
1074#
1075# And for Unix Socket
1076#bind_to_address "~/.mpd/socket"
1077#
1078# This setting is the TCP port that is desired for the daemon to get assigned
1079# to.
1080#
1081#port "6600"
1082#
1083# This setting controls the type of information which is logged. Available
1084# setting arguments are "default", "secure" or "verbose". The "verbose" setting
1085# argument is recommended for troubleshooting, though can quickly stretch
1086# available resources on limited hardware storage.
1087#
1088#log_level "default"
1089#
1090# If you have a problem with your MP3s ending abruptly it is recommended that
1091# you set this argument to "no" to attempt to fix the problem. If this solves
1092# the problem, it is highly recommended to fix the MP3 files with vbrfix
1093# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
1094# point gapless MP3 playback can be enabled.
1095#
1096#gapless_mp3_playback "yes"
1097#
1098# Setting "restore_paused" to "yes" puts MPD into pause mode instead
1099# of starting playback after startup.
1100#
1101#restore_paused "no"
1102#
1103# This setting enables MPD to create playlists in a format usable by other
1104# music players.
1105#
1106#save_absolute_paths_in_playlists "no"
1107#
1108# This setting defines a list of tag types that will be extracted during the
1109# audio file discovery process. The complete list of possible values can be
1110# found in the user manual.
1111#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
1112#
1113# This setting enables automatic update of MPD's database when files in
1114# music_directory are changed.
1115#
1116#auto_update "yes"
1117#
1118# Limit the depth of the directories being watched, 0 means only watch
1119# the music directory itself. There is no limit by default.
1120#
1121#auto_update_depth "3"
1122#
1123###############################################################################
1124
1125
1126# Symbolic link behavior ######################################################
1127#
1128# If this setting is set to "yes", MPD will discover audio files by following
1129# symbolic links outside of the configured music_directory.
1130#
1131#follow_outside_symlinks "yes"
1132#
1133# If this setting is set to "yes", MPD will discover audio files by following
1134# symbolic links inside of the configured music_directory.
1135#
1136#follow_inside_symlinks "yes"
1137#
1138###############################################################################
1139
1140
1141# Zeroconf / Avahi Service Discovery ##########################################
1142#
1143# If this setting is set to "yes", service information will be published with
1144# Zeroconf / Avahi.
1145#
1146#zeroconf_enabled "yes"
1147#
1148# The argument to this setting will be the Zeroconf / Avahi unique name for
1149# this MPD server on the network.
1150#
1151#zeroconf_name "Music Player"
1152#
1153###############################################################################
1154
1155
1156# Permissions #################################################################
1157#
1158# If this setting is set, MPD will require password authorization. The password
1159# setting can be specified multiple times for different password profiles.
1160#
1161#password "password@read,add,control,admin"
1162#
1163# This setting specifies the permissions a user has who has not yet logged in.
1164#
1165#default_permissions "read,add,control,admin"
1166#
1167###############################################################################
1168
1169
1170# Database #######################################################################
1171#
1172
1173#database {
1174# plugin "proxy"
1175# host "other.mpd.host"
1176# port "6600"
1177#}
1178
1179# Input #######################################################################
1180#
1181
1182input {
1183 plugin "curl"
1184# proxy "proxy.isp.com:8080"
1185# proxy_user "user"
1186# proxy_password "password"
1187}
1188
1189#
1190###############################################################################
1191
1192# Audio Output ################################################################
1193#
1194
1195audio_output {
1196 type "pulse"
1197 name "pulse audio"
1198}
1199
1200audio_output {
1201 type "fifo"
1202 name "my_fifo"
1203 path "/tmp/mpd.fifo"
1204 format "44100:16:2"
1205}
1206
1207# MPD supports various audio output types, as well as playing through multiple
1208# audio outputs at the same time, through multiple audio_output settings
1209# blocks. Setting this block is optional, though the server will only attempt
1210# autodetection for one sound card.
1211#
1212# An example of an ALSA output:
1213#
1214#audio_output {
1215# type "alsa"
1216# name "My ALSA Device"
1217## device "hw:0,0" # optional
1218## mixer_type "hardware" # optional
1219## mixer_device "default" # optional
1220## mixer_control "PCM" # optional
1221## mixer_index "0" # optional
1222#}
1223#
1224# An example of an OSS output:
1225#
1226#audio_output {
1227# type "oss"
1228# name "My OSS Device"
1229## device "/dev/dsp" # optional
1230## mixer_type "hardware" # optional
1231## mixer_device "/dev/mixer" # optional
1232## mixer_control "PCM" # optional
1233#}
1234#
1235# An example of a shout output (for streaming to Icecast):
1236#
1237#audio_output {
1238# type "shout"
1239# encoder "vorbis" # optional
1240# name "My Shout Stream"
1241# host "localhost"
1242# port "8000"
1243# mount "/mpd.ogg"
1244# password "hackme"
1245# quality "5.0"
1246# bitrate "128"
1247# format "44100:16:1"
1248## protocol "icecast2" # optional
1249## user "source" # optional
1250## description "My Stream Description" # optional
1251## url "http://example.com" # optional
1252## genre "jazz" # optional
1253## public "no" # optional
1254## timeout "2" # optional
1255## mixer_type "software" # optional
1256#}
1257#
1258# An example of a recorder output:
1259#
1260#audio_output {
1261# type "recorder"
1262# name "My recorder"
1263# encoder "vorbis" # optional, vorbis or lame
1264# path "/var/lib/mpd/recorder/mpd.ogg"
1265## quality "5.0" # do not define if bitrate is defined
1266# bitrate "128" # do not define if quality is defined
1267# format "44100:16:1"
1268#}
1269#
1270# An example of a httpd output (built-in HTTP streaming server):
1271#
1272#audio_output {
1273# type "httpd"
1274# name "My HTTP Stream"
1275# encoder "vorbis" # optional, vorbis or lame
1276# port "8000"
1277# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
1278## quality "5.0" # do not define if bitrate is defined
1279# bitrate "128" # do not define if quality is defined
1280# format "44100:16:1"
1281# max_clients "0" # optional 0=no limit
1282#}
1283#
1284# An example of a pulseaudio output (streaming to a remote pulseaudio server)
1285#
1286#audio_output {
1287# type "pulse"
1288# name "My Pulse Output"
1289## server "remote_server" # optional
1290## sink "remote_server_sink" # optional
1291#}
1292#
1293# An example of a winmm output (Windows multimedia API).
1294#
1295#audio_output {
1296# type "winmm"
1297# name "My WinMM output"
1298## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1299# or
1300## device "0" # optional
1301## mixer_type "hardware" # optional
1302#}
1303#
1304# An example of an openal output.
1305#
1306#audio_output {
1307# type "openal"
1308# name "My OpenAL output"
1309## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1310#}
1311#
1312# An example of an sndio output.
1313#
1314#audio_output {
1315# type "sndio"
1316# name "sndio output"
1317# mixer_type "software"
1318#}
1319#
1320# An example of an OS X output:
1321#
1322#audio_output {
1323# type "osx"
1324# name "My OS X Device"
1325## device "Built-in Output" # optional
1326## channel_map "-1,-1,0,1" # optional
1327#}
1328#
1329## Example "pipe" output:
1330#
1331#audio_output {
1332# type "pipe"
1333# name "my pipe"
1334# command "aplay -f cd 2>/dev/null"
1335## Or if you're want to use AudioCompress
1336# command "AudioCompress -m | aplay -f cd 2>/dev/null"
1337## Or to send raw PCM stream through PCM:
1338# command "nc example.org 8765"
1339# format "44100:16:2"
1340#}
1341#
1342## An example of a null output (for no audio output):
1343#
1344#audio_output {
1345# type "null"
1346# name "My Null Output"
1347# mixer_type "none" # optional
1348#}
1349#
1350###############################################################################
1351
1352
1353# Normalization automatic volume adjustments ##################################
1354#
1355# This setting specifies the type of ReplayGain to use. This setting can have
1356# the argument "off", "album", "track" or "auto". "auto" is a special mode that
1357# chooses between "track" and "album" depending on the current state of
1358# random playback. If random playback is enabled then "track" mode is used.
1359# See <http://www.replaygain.org> for more details about ReplayGain.
1360# This setting is off by default.
1361#
1362#replaygain "album"
1363#
1364# This setting sets the pre-amp used for files that have ReplayGain tags. By
1365# default this setting is disabled.
1366#
1367#replaygain_preamp "0"
1368#
1369# This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1370# By default this setting is disabled.
1371#
1372#replaygain_missing_preamp "0"
1373#
1374# This setting enables or disables ReplayGain limiting.
1375# MPD calculates actual amplification based on the ReplayGain tags
1376# and replaygain_preamp / replaygain_missing_preamp setting.
1377# If replaygain_limit is enabled MPD will never amplify audio signal
1378# above its original level. If replaygain_limit is disabled such amplification
1379# might occur. By default this setting is enabled.
1380#
1381#replaygain_limit "yes"
1382#
1383# This setting enables on-the-fly normalization volume adjustment. This will
1384# result in the volume of all playing audio to be adjusted so the output has
1385# equal "loudness". This setting is disabled by default.
1386#
1387#volume_normalization "no"
1388#
1389###############################################################################
1390
1391# Character Encoding ##########################################################
1392#
1393# If file or directory names do not display correctly for your locale then you
1394# may need to modify this setting.
1395#
1396#filesystem_charset "UTF-8"
1397#
1398###############################################################################
1399#+end_src
1400
1401** msmtp
1402:PROPERTIES:
1403:header-args+: :tangle ~/.msmtprc
1404:END:
1405
1406#+begin_src conf
1407# Set default values for all following accounts.
1408defaults
1409port 587
1410tls on
1411auth on
1412#tls_trust_file /etc/ssl/certs/ca-certificates.crt
1413logfile ~/.msmtp.log
1414
1415# aminb
1416account aminb
1417host nix.aminb.org
1418tls_fingerprint BB:98:B3:02:83:B0:E0:C3:49:3E:C2:B2:A8:60:62:78:03:B3:5D:B3:BD:B8:0A:39:BB:E4:B0:66:D1:CF:D1:6B
1419tls_starttls on
1420from amin@aminb.org
1421user amin@aminb.org
1422passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
1423
1424# gnu
1425account gnu
1426host fencepost.gnu.org
1427tls_fingerprint 94:0E:37:EB:EA:44:5A:4B:B6:6F:16:3D:6C:7E:7E:44:2D:93:61:C1:FE:82:A8:29:5E:3C:12:4E:2D:BE:0E:2C
1428tls_starttls on
1429from aminb@gnu.org
1430user aminb
1431passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
1432
1433# uwaterloo
1434account uwaterloo
1435host connect.uwaterloo.ca
1436tls_starttls on
1437from abandali@uwaterloo.ca
1438user abandali
1439passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
1440tls_trust_file /etc/ssl/certs/ca-certificates.crt
1441
1442# uwaterloo (friendly address)
1443account uwaterloo-friendly : uwaterloo
1444from amin.bandali@uwaterloo.ca
1445
1446# Set a default account
1447account default : aminb
1448#+end_src
1449
1450** ncmpcpp
1451
1452*** config
1453:PROPERTIES:
1454:header-args+: :tangle ~/.ncmpcpp/config
1455:END:
1456
1457#+begin_src conf :tangle no
1458##############################################################
1459## This is the example configuration file. Copy it to ##
1460## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
1461## and set up your preferences. ##
1462##############################################################
1463#
1464##### directories ######
1465##
1466## Directory for storing ncmpcpp related files.
1467## Changing it is useful if you want to store
1468## everything somewhere else and provide command
1469## line setting for alternative location to config
1470## file which defines that while launching ncmpcpp.
1471##
1472#
1473ncmpcpp_directory = ~/.ncmpcpp
1474#
1475##
1476## Directory for storing downloaded lyrics. It
1477## defaults to ~/.lyrics since other MPD clients
1478## (eg. ncmpc) also use that location.
1479##
1480#
1481#lyrics_directory = ~/.lyrics
1482#
1483##### connection settings #####
1484#
1485#mpd_host = localhost
1486#
1487#mpd_port = 6600
1488#
1489#mpd_connection_timeout = 5
1490#
1491## Needed for tag editor and file operations to work.
1492##
1493mpd_music_dir = ~/usr/music
1494#
1495#mpd_crossfade_time = 5
1496#
1497##### music visualizer #####
1498##
1499## Note: In order to make music visualizer work you'll
1500## need to use mpd fifo output, whose format parameter
1501## has to be set to 44100:16:1 for mono visualization
1502## or 44100:16:2 for stereo visualization. Example
1503## configuration (it has to be put into mpd.conf):
1504##
1505## audio_output {
1506## type "fifo"
1507## name "Visualizer feed"
1508## path "/tmp/mpd.fifo"
1509## format "44100:16:2"
1510## }
1511##
1512#
1513visualizer_fifo_path = /tmp/mpd.fifo
1514#
1515##
1516## Note: Below parameter is needed for ncmpcpp
1517## to determine which output provides data for
1518## visualizer and thus allow syncing between
1519## visualization and sound as currently there
1520## are some problems with it.
1521##
1522#
1523visualizer_output_name = my fifo
1524#
1525##
1526## If you set format to 44100:16:2, make it 'yes'.
1527##
1528visualizer_in_stereo = yes
1529#
1530##
1531## Multiply received samples by given value. Very
1532## useful for proper visualization of quiet music.
1533##
1534#visualizer_sample_multiplier = 1
1535#
1536##
1537## Note: Below parameter defines how often ncmpcpp
1538## has to "synchronize" visualizer and audio outputs.
1539## 30 seconds is optimal value, but if you experience
1540## synchronization problems, set it to lower value.
1541## Keep in mind that sane values start with >=10.
1542##
1543#
1544visualizer_sync_interval = 30
1545#
1546##
1547## Note: To enable spectrum frequency visualization
1548## you need to compile ncmpcpp with fftw3 support.
1549##
1550#
1551## Available values: spectrum, wave, wave_filled, ellipse.
1552##
1553visualizer_type = spectrum
1554#
1555#visualizer_look = ●▮
1556visualizer_look = "●•"
1557#
1558#visualizer_color = blue, cyan, green, yellow, magenta, red
1559#
1560## Alternative subset of 256 colors for terminals that support it.
1561##
1562#visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
1563#
1564##### system encoding #####
1565##
1566## ncmpcpp should detect your charset encoding
1567## but if it failed to do so, you can specify
1568## charset encoding you are using here.
1569##
1570## Note: You can see whether your ncmpcpp build
1571## supports charset detection by checking output
1572## of `ncmpcpp --version`.
1573##
1574## Note: Since MPD uses UTF-8 by default, setting
1575## this option makes sense only if your encoding
1576## is different.
1577##
1578#
1579#system_encoding = ""
1580#
1581##### delays #####
1582#
1583## Time of inactivity (in seconds) after playlist
1584## highlighting will be disabled (0 = always on).
1585##
1586#playlist_disable_highlight_delay = 5
1587#
1588## Defines how long messages are supposed to be visible.
1589##
1590#message_delay_time = 5
1591#
1592##### song format #####
1593##
1594## For a song format you can use:
1595##
1596## %l - length
1597## %f - filename
1598## %D - directory
1599## %a - artist
1600## %A - album artist
1601## %t - title
1602## %b - album
1603## %y - date
1604## %n - track number (01/12 -> 01)
1605## %N - full track info (01/12 -> 01/12)
1606## %g - genre
1607## %c - composer
1608## %p - performer
1609## %d - disc
1610## %C - comment
1611## %P - priority
1612## $R - begin right alignment
1613##
1614## If you want to make sure that a part of the format is displayed
1615## only when certain tags are present, you can archieve it by
1616## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
1617## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
1618## It is also possible to define a list of alternatives by providing
1619## several groups and separating them with '|', e.g. '{%t}|{%f}'
1620## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
1621## present.
1622##
1623## Note: If you want to set limit on maximal length of a tag, just
1624## put the appropriate number between % and character that defines
1625## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
1626##
1627## In addition, formats support markers used for text attributes.
1628## They are followed by character '$'. After that you can put:
1629##
1630## - 0 - default window color (discards all other colors)
1631## - 1 - black
1632## - 2 - red
1633## - 3 - green
1634## - 4 - yellow
1635## - 5 - blue
1636## - 6 - magenta
1637## - 7 - cyan
1638## - 8 - white
1639## - 9 - end of current color
1640## - b - bold text
1641## - u - underline text
1642## - r - reverse colors
1643## - a - use alternative character set
1644##
1645## If you don't want to use a non-color attribute anymore, just put it
1646## again, but this time insert character '/' between '$' and attribute
1647## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
1648## or filename with reversed colors.
1649##
1650## If you want to use 256 colors and/or background colors in formats
1651## (the naming scheme is described below in section about color
1652## definitions), it can be done with the syntax $(COLOR), e.g. to set
1653## the artist tag to one of the non-standard colors and make it have
1654## yellow background, you need to write $(197_yellow)%a$(end). Note
1655## that for standard colors this is interchangable with attributes
1656## listed above.
1657##
1658## Note: colors can be nested.
1659##
1660#
1661#song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
1662#
1663#song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
1664#
1665#song_library_format = {%n - }{%t}|{%f}
1666#
1667#
1668#alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
1669#
1670#alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
1671#
1672#now_playing_prefix = $b
1673#
1674#now_playing_suffix = $/b
1675#
1676#browser_playlist_prefix = "$2playlist$9 "
1677#
1678#selected_item_prefix = $6
1679#
1680#selected_item_suffix = $9
1681#
1682#modified_item_prefix = $3> $9
1683#
1684##
1685## Note: attributes are not supported for the following variables.
1686##
1687#song_window_title_format = {%a - }{%t}|{%f}
1688##
1689## Note: Below variables are used for sorting songs in browser.
1690## The sort mode determines how songs are sorted, and can be used
1691## in combination with a sort format to specify a custom sorting format.
1692## Available values for browser_sort_mode are "name", "mtime", "format"
1693## and "noop".
1694##
1695#
1696#browser_sort_mode = name
1697#
1698#browser_sort_format = {%a - }{%t}|{%f} {(%l)}
1699#
1700##### columns settings #####
1701##
1702## syntax of song columns list format is "column column etc."
1703##
1704## - syntax for each column is:
1705##
1706## (width of the column)[color of the column]{displayed tag}
1707##
1708## Note: Width is by default in %, if you want a column to
1709## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
1710## will be the column that take 10% of screen (so the real width
1711## will depend on actual screen size), whereas (10f)[white]{a}
1712## will take 10 terminal cells, no matter how wide the screen is.
1713##
1714## - color is optional (if you want the default one,
1715## leave the field empty).
1716##
1717## Note: You can give a column additional attributes by putting appropriate
1718## character after displayed tag character. Available attributes are:
1719##
1720## - r - column will be right aligned
1721## - E - if tag is empty, empty tag marker won't be displayed
1722##
1723## You can also:
1724##
1725## - give a column custom name by putting it after attributes,
1726## separated with character ':', e.g. {lr:Length} gives you
1727## right aligned column of lengths named "Length".
1728##
1729## - define sequence of tags, that have to be displayed in case
1730## predecessor is empty in a way similar to the one in classic
1731## song format, i.e. using '|' character, e.g. {a|c|p:Owner}
1732## creates column named "Owner" that tries to display artist
1733## tag and then composer and performer if previous ones are
1734## not available.
1735##
1736#
1737#song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
1738#
1739##### various settings #####
1740#
1741##
1742## Note: Custom command that will be executed each
1743## time song changes. Useful for notifications etc.
1744##
1745#execute_on_song_change = ""
1746#
1747#playlist_show_mpd_host = no
1748#
1749#playlist_show_remaining_time = no
1750#
1751#playlist_shorten_total_times = no
1752#
1753#playlist_separate_albums = no
1754#
1755##
1756## Note: Possible display modes: classic, columns.
1757##
1758#playlist_display_mode = columns
1759#
1760#browser_display_mode = classic
1761#
1762#search_engine_display_mode = classic
1763#
1764#playlist_editor_display_mode = classic
1765#
1766#discard_colors_if_item_is_selected = yes
1767#
1768#incremental_seeking = yes
1769#
1770#seek_time = 1
1771#
1772#volume_change_step = 2
1773#
1774#autocenter_mode = no
1775#
1776#centered_cursor = no
1777#
1778##
1779## Note: You can specify third character which will
1780## be used to build 'empty' part of progressbar.
1781##
1782#progressbar_look = =>
1783progressbar_look = "─╼╶"
1784#progressbar_look = "─⊙╶"
1785#
1786#progressbar_boldness = yes
1787#
1788## Available values: database, playlist.
1789##
1790#default_place_to_search_in = database
1791#
1792## Available values: classic, alternative.
1793##
1794#user_interface = classic
1795#
1796#data_fetching_delay = yes
1797#
1798## Available values: artist, album_artist, date, genre, composer, performer.
1799##
1800#media_library_primary_tag = artist
1801#
1802## Available values: wrapped, normal.
1803##
1804#default_find_mode = wrapped
1805#
1806#default_tag_editor_pattern = %n - %t
1807#
1808#header_visibility = yes
1809#
1810#statusbar_visibility = yes
1811#
1812#titles_visibility = yes
1813#
1814#header_text_scrolling = yes
1815#
1816#cyclic_scrolling = no
1817#
1818#lines_scrolled = 2
1819#
1820#follow_now_playing_lyrics = no
1821#
1822#fetch_lyrics_for_current_song_in_background = no
1823#
1824#store_lyrics_in_song_dir = no
1825#
1826#generate_win32_compatible_filenames = yes
1827#
1828#allow_for_physical_item_deletion = no
1829#
1830##
1831## Note: If you set this variable, ncmpcpp will try to
1832## get info from last.fm in language you set and if it
1833## fails, it will fall back to english. Otherwise it will
1834## use english the first time.
1835##
1836## Note: Language has to be expressed as an ISO 639 alpha-2 code.
1837##
1838#lastfm_preferred_language = en
1839#
1840#show_hidden_files_in_local_browser = no
1841#
1842##
1843## How shall screen switcher work?
1844##
1845## - "previous" - switch between the current and previous screen.
1846## - "screen1,...,screenN" - switch between given sequence of screens.
1847##
1848## Screens available for use: help, playlist, browser, search_engine,
1849## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
1850##
1851#screen_switcher_mode = playlist, browser
1852#
1853##
1854## Note: You can define startup screen
1855## by choosing screen from the list above.
1856##
1857#startup_screen = playlist
1858#
1859##
1860## Note: You can define startup slave screen
1861## by choosing screen from the list above or
1862## an empty value for no slave screen.
1863##
1864#startup_slave_screen = ""
1865#
1866#startup_slave_screen_focus = no
1867#
1868##
1869## Default width of locked screen (in %).
1870## Acceptable values are from 20 to 80.
1871##
1872#
1873#locked_screen_width_part = 50
1874#
1875#ask_for_locked_screen_width_part = yes
1876#
1877#jump_to_now_playing_song_at_start = yes
1878#
1879#ask_before_clearing_playlists = yes
1880#
1881#clock_display_seconds = no
1882#
1883#display_volume_level = yes
1884#
1885#display_bitrate = no
1886#
1887#display_remaining_time = no
1888#
1889## Available values: none, basic, extended, perl.
1890##
1891#regular_expressions = perl
1892#
1893##
1894## Note: If below is enabled, ncmpcpp will ignore leading
1895## "The" word while sorting items in browser, tags in
1896## media library, etc.
1897##
1898#ignore_leading_the = no
1899#
1900#block_search_constraints_change_if_items_found = yes
1901#
1902#mouse_support = yes
1903#
1904#mouse_list_scroll_whole_page = yes
1905#
1906#empty_tag_marker = <empty>
1907#
1908#tags_separator = " | "
1909#
1910#tag_editor_extended_numeration = no
1911#
1912#media_library_sort_by_mtime = no
1913#
1914#enable_window_title = yes
1915#
1916##
1917## Note: You can choose default search mode for search
1918## engine. Available modes are:
1919##
1920## - 1 - use mpd built-in searching (no regexes, pattern matching)
1921## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
1922## but if your mpd is on a remote machine, downloading big database
1923## to process it can take a while
1924## - 3 - match only exact values (this mode uses mpd function for searching
1925## in database and local one for searching in current playlist)
1926##
1927#
1928#search_engine_default_search_mode = 1
1929#
1930#external_editor = nano
1931#
1932## Note: set to yes if external editor is a console application.
1933##
1934#use_console_editor = yes
1935#
1936##### colors definitions #####
1937##
1938## It is possible to set a background color by setting a color
1939## value "<foreground>_<background>", e.g. red_black will set
1940## foregound color to red and background color to black.
1941##
1942## In addition, for terminals that support 256 colors it
1943## is possible to set one of them by using a number in range
1944## [1, 256] instead of color name, e.g. numerical value
1945## corresponding to red_black is 2_1. To find out if the
1946## terminal supports 256 colors, run ncmpcpp and check out
1947## the bottom of the help screen for list of available colors
1948## and their numerical values.
1949##
1950## Note: due to technical limitations of ncurses, if 256 colors
1951## are used, it is possible to either use only the colors with
1952## default background color, or all pairs from 1_1 up to 254_127,
1953## depending on the ncurses version used.
1954##
1955#
1956#colors_enabled = yes
1957#
1958#empty_tag_color = cyan
1959#
1960#header_window_color = default
1961#
1962#volume_color = default
1963#
1964#state_line_color = default
1965#
1966#state_flags_color = default
1967#
1968#main_window_color = yellow
1969#
1970#color1 = white
1971#
1972#color2 = green
1973#
1974#main_window_highlight_color = yellow
1975#
1976#progressbar_color = black
1977#
1978#progressbar_elapsed_color = green
1979#
1980#statusbar_color = default
1981#
1982#alternative_ui_separator_color = black
1983#
1984#active_column_color = red
1985#
1986#window_border_color = green
1987#
1988#active_window_border = red
1989#
1990#+end_src
1991
1992*** bindings
1993:PROPERTIES:
1994:header-args+: :tangle ~/.ncmpcpp/bindings
1995:END:
1996
1997#+begin_src conf :tangle no
1998def_key "j"
1999 scroll_down
2000def_key "k"
2001 scroll_up
2002
2003def_key "ctrl-u"
2004 page_up
2005def_key "ctrl-d"
2006 page_down
2007
2008def_key "h"
2009 previous_column
2010def_key "l"
2011 next_column
2012
2013def_key "."
2014 show_lyrics
2015
2016def_key "n"
2017 next_found_item
2018def_key "N"
2019 previous_found_item
2020
2021def_key "J"
2022 move_sort_order_down
2023def_key "K"
2024 move_sort_order_up
2025#+end_src
2026
b13e2dc1
AB
2027* Scripts
2028
2029This section contains various useful scripts and the ones used by the
2030programs above. For instance, =toggle-tablet= for switching to and
2031from tablet mode on my X220T, =toggle-presentation-mode= for toggling
2032Xfce's presentation mode which keeps the screen awake, and
2033=rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
2034exact brightness value.
2035
2036** rofi-light
2037:PROPERTIES:
2038:header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
2039:END:
2040
33c5a5cd 2041#+begin_src bash
b13e2dc1
AB
2042cur=$(light -G)
2043val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 8)
2044light -S $val
2045#+end_src
2046
2047** toggle-layout
2048:PROPERTIES:
2049:header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
2050:END:
2051
33c5a5cd 2052#+begin_src bash
b13e2dc1
AB
2053lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
2054
2055if [ "$lang" = "us" ]; then
2056 setxkbmap ir
2057else
2058 setxkbmap us
2059 # xmodmap $HOME/.Xmodmap
2060fi
2061#+end_src
2062
2063** toggle-presentation-mode
2064:PROPERTIES:
2065:header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
2066:END:
2067
33c5a5cd 2068#+begin_src bash
b13e2dc1
AB
2069xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
2070#+end_src
33c5a5cd
AB
2071
2072** Fun :)
2073
2074*** eat-em
2075:PROPERTIES:
2076:header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
2077:END:
2078
2079#+begin_src sh
2080# Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
2081# [ESC] character in original post removed here.
2082
2083# ANSI Color -- use these variables to easily have different color
2084# and format output. Make sure to output the reset sequence after
2085# colors (f = foreground, b = background), and use the 'off'
2086# feature for anything you turn on.
2087
2088initializeANSI()
2089{
2090 esc="$(echo -en '\e')"
2091
2092 blackf="${esc}[30m"; redf="${esc}[31m"; greenf="${esc}[32m"
2093 yellowf="${esc}[33m" bluef="${esc}[34m"; purplef="${esc}[35m"
2094 cyanf="${esc}[36m"; whitef="${esc}[37m"
2095
2096 blackb="${esc}[40m"; redb="${esc}[41m"; greenb="${esc}[42m"
2097 yellowb="${esc}[43m" blueb="${esc}[44m"; purpleb="${esc}[45m"
2098 cyanb="${esc}[46m"; whiteb="${esc}[47m"
2099
2100 boldon="${esc}[1m"; boldoff="${esc}[22m"
2101 italicson="${esc}[3m"; italicsoff="${esc}[23m"
2102 ulon="${esc}[4m"; uloff="${esc}[24m"
2103 invon="${esc}[7m"; invoff="${esc}[27m"
2104
2105 reset="${esc}[0m"
2106}
2107
2108# note in this first use that switching colors doesn't require a reset
2109# first - the new color overrides the old one.
2110
2111#clear
2112
2113initializeANSI
2114
2115cat << EOF
2116
2117 ${yellowf} ▄███████▄${reset} ${redf} ▄██████▄${reset} ${greenf} ▄██████▄${reset} ${bluef} ▄██████▄${reset} ${purplef} ▄██████▄${reset} ${cyanf} ▄██████▄${reset}
2118 ${yellowf}▄█████████▀▀${reset} ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset} ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset} ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset} ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset} ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
2119 ${yellowf}███████▀${reset} ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset} ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset} ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset} ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset} ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
2120 ${yellowf}███████▄${reset} ${redf}████████████${reset} ${greenf}████████████${reset} ${bluef}████████████${reset} ${purplef}████████████${reset} ${cyanf}████████████${reset}
2121 ${yellowf}▀█████████▄▄${reset} ${redf}██▀██▀▀██▀██${reset} ${greenf}██▀██▀▀██▀██${reset} ${bluef}██▀██▀▀██▀██${reset} ${purplef}██▀██▀▀██▀██${reset} ${cyanf}██▀██▀▀██▀██${reset}
2122 ${yellowf} ▀███████▀${reset} ${redf}▀ ▀ ▀ ▀${reset} ${greenf}▀ ▀ ▀ ▀${reset} ${bluef}▀ ▀ ▀ ▀${reset} ${purplef}▀ ▀ ▀ ▀${reset} ${cyanf}▀ ▀ ▀ ▀${reset}
2123
2124 ${boldon}${yellowf} ▄███████▄ ${redf} ▄██████▄ ${greenf} ▄██████▄ ${bluef} ▄██████▄ ${purplef} ▄██████▄ ${cyanf} ▄██████▄${reset}
2125 ${boldon}${yellowf}▄█████████▀▀ ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄ ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄ ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄ ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄ ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
2126 ${boldon}${yellowf}███████▀ ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███ ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███ ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███ ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███ ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
2127 ${boldon}${yellowf}███████▄ ${redf}████████████ ${greenf}████████████ ${bluef}████████████ ${purplef}████████████ ${cyanf}████████████${reset}
2128 ${boldon}${yellowf}▀█████████▄▄ ${redf}██▀██▀▀██▀██ ${greenf}██▀██▀▀██▀██ ${bluef}██▀██▀▀██▀██ ${purplef}██▀██▀▀██▀██ ${cyanf}██▀██▀▀██▀██${reset}
2129 ${boldon}${yellowf} ▀███████▀ ${redf}▀ ▀ ▀ ▀ ${greenf}▀ ▀ ▀ ▀ ${bluef}▀ ▀ ▀ ▀ ${purplef}▀ ▀ ▀ ▀ ${cyanf}▀ ▀ ▀ ▀${reset}
2130
2131EOF
2132#+end_src
2133
33c5a5cd
AB
2134*** invade-em
2135:PROPERTIES:
2136:header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
2137:END:
2138
2139#+begin_src bash
2140#
2141# ANSI color scheme script featuring Space Invaders
2142#
2143# Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
2144# Modified by lolilolicon
2145#
2146
2147f=3 b=4
2148for j in f b; do
2149 for i in {0..7}; do
2150 printf -v $j$i %b "\e[${!j}${i}m"
2151 done
2152done
2153bld=$'\e[1m'
2154rst=$'\e[0m'
2155
2156cat << EOF
2157
2158 $f1 ▀▄ ▄▀ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4 ▀▄ ▄▀ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
2159 $f1 ▄█▀███▀█▄ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4 ▄█▀███▀█▄ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
2160 $f1█▀███████▀█ $f2▀▀███▀▀███▀▀ $f3▀█▀██▀█▀ $f4█▀███████▀█ $f5▀▀███▀▀███▀▀ $f6▀█▀██▀█▀$rst
2161 $f1▀ ▀▄▄ ▄▄▀ ▀ $f2 ▀█▄ ▀▀ ▄█▀ $f3▀▄ ▄▀ $f4▀ ▀▄▄ ▄▄▀ ▀ $f5 ▀█▄ ▀▀ ▄█▀ $f6▀▄ ▄▀$rst
2162
2163 $bld$f1▄ ▀▄ ▄▀ ▄ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4▄ ▀▄ ▄▀ ▄ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
2164 $bld$f1█▄█▀███▀█▄█ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4█▄█▀███▀█▄█ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
2165 $bld$f1▀█████████▀ $f2▀▀▀██▀▀██▀▀▀ $f3▀▀█▀▀█▀▀ $f4▀█████████▀ $f5▀▀▀██▀▀██▀▀▀ $f6▀▀█▀▀█▀▀$rst
2166 $bld$f1 ▄▀ ▀▄ $f2▄▄▀▀ ▀▀ ▀▀▄▄ $f3▄▀▄▀▀▄▀▄ $f4 ▄▀ ▀▄ $f5▄▄▀▀ ▀▀ ▀▀▄▄ $f6▄▀▄▀▀▄▀▄$rst
2167
2168
2169 $f7▌$rst
2170
2171 $f7▌$rst
2172
2173 $f7 ▄█▄ $rst
2174 $f7▄█████████▄$rst
2175 $f7▀▀▀▀▀▀▀▀▀▀▀$rst
2176
2177EOF
2178#+end_src