emacs: moody: tweak mode-line colour
[~bandali/configs] / rc.org
CommitLineData
08146d0e
AB
1#+title: rc.org
2#+property: header-args :comments link :mkdirp yes :results silent
3
4* About
5
6This org file contains the configuration files of pretty much every
7program I use. The files are tangled (i.e. exported, or derived) from
8this file using =org-babel=.
9
10Note: This file is best viewed inside Emacs with org mode.
11
12* Configs
13
b13e2dc1
AB
14This section contains the configuration files (dotfiles) of various
15programs I use.
16
59027673
AB
17** mpd
18:PROPERTIES:
19:header-args+: :tangle ~/.config/mpd/mpd.conf
20:END:
21
22#+begin_src conf
23# An example configuration file for MPD.
24# Read the user manual for documentation: http://www.musicpd.org/doc/user/
25
26
27# Files and directories #######################################################
28#
29# This setting controls the top directory which MPD will search to discover the
30# available audio files and add them to the daemon's online database. This
31# setting defaults to the XDG directory, otherwise the music directory will be
32# be disabled and audio files will only be accepted over ipc socket (using
33# file:// protocol) or streaming files over an accepted protocol.
34#
35music_directory "~/usr/music"
36#
37# This setting sets the MPD internal playlist directory. The purpose of this
38# directory is storage for playlists created by MPD. The server will use
39# playlist files not created by the server but only if they are in the MPD
40# format. This setting defaults to playlist saving being disabled.
41#
42playlist_directory "~/.mpd/playlists"
43#
44# This setting sets the location of the MPD database. This file is used to
45# load the database at server start up and store the database while the
46# server is not up. This setting defaults to disabled which will allow
47# MPD to accept files over ipc socket (using file:// protocol) or streaming
48# files over an accepted protocol.
49#
50db_file "~/.mpd/database"
51#
52# These settings are the locations for the daemon log files for the daemon.
53# These logs are great for troubleshooting, depending on your log_level
54# settings.
55#
56# The special value "syslog" makes MPD use the local syslog daemon. This
57# setting defaults to logging to syslog, otherwise logging is disabled.
58#
59log_file "~/.mpd/log"
60#
61# This setting sets the location of the file which stores the process ID
62# for use of mpd --kill and some init scripts. This setting is disabled by
63# default and the pid file will not be stored.
64#
65pid_file "~/.mpd/pid"
66#
67# This setting sets the location of the file which contains information about
68# most variables to get MPD back into the same general shape it was in before
69# it was brought down. This setting is disabled by default and the server
70# state will be reset on server start up.
71#
72state_file "~/.mpd/state"
73#
74# The location of the sticker database. This is a database which
75# manages dynamic information attached to songs.
76#
77sticker_file "~/.mpd/sticker.sql"
78#
79###############################################################################
80
81
82# General music daemon options ################################################
83#
84# This setting specifies the user that MPD will run as. MPD should never run as
85# root and you may use this setting to make MPD change its user ID after
86# initialization. This setting is disabled by default and MPD is run as the
87# current user.
88#
89#user "nobody"
90#
91# This setting specifies the group that MPD will run as. If not specified
92# primary group of user specified with "user" setting will be used (if set).
93# This is useful if MPD needs to be a member of group such as "audio" to
94# have permission to use sound card.
95#
96#group "nogroup"
97#
98# This setting sets the address for the daemon to listen on. Careful attention
99# should be paid if this is assigned to anything other then the default, any.
100# This setting can deny access to control of the daemon. Not effective if
101# systemd socket activiation is in use.
102#
103# For network
104#bind_to_address "any"
105#
106# And for Unix Socket
107#bind_to_address "~/.mpd/socket"
108#
109# This setting is the TCP port that is desired for the daemon to get assigned
110# to.
111#
112#port "6600"
113#
114# This setting controls the type of information which is logged. Available
115# setting arguments are "default", "secure" or "verbose". The "verbose" setting
116# argument is recommended for troubleshooting, though can quickly stretch
117# available resources on limited hardware storage.
118#
119#log_level "default"
120#
121# If you have a problem with your MP3s ending abruptly it is recommended that
122# you set this argument to "no" to attempt to fix the problem. If this solves
123# the problem, it is highly recommended to fix the MP3 files with vbrfix
124# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
125# point gapless MP3 playback can be enabled.
126#
127#gapless_mp3_playback "yes"
128#
129# Setting "restore_paused" to "yes" puts MPD into pause mode instead
130# of starting playback after startup.
131#
132#restore_paused "no"
133#
134# This setting enables MPD to create playlists in a format usable by other
135# music players.
136#
137#save_absolute_paths_in_playlists "no"
138#
139# This setting defines a list of tag types that will be extracted during the
140# audio file discovery process. The complete list of possible values can be
141# found in the user manual.
142#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
143#
144# This setting enables automatic update of MPD's database when files in
145# music_directory are changed.
146#
147#auto_update "yes"
148#
149# Limit the depth of the directories being watched, 0 means only watch
150# the music directory itself. There is no limit by default.
151#
152#auto_update_depth "3"
153#
154###############################################################################
155
156
157# Symbolic link behavior ######################################################
158#
159# If this setting is set to "yes", MPD will discover audio files by following
160# symbolic links outside of the configured music_directory.
161#
162#follow_outside_symlinks "yes"
163#
164# If this setting is set to "yes", MPD will discover audio files by following
165# symbolic links inside of the configured music_directory.
166#
167#follow_inside_symlinks "yes"
168#
169###############################################################################
170
171
172# Zeroconf / Avahi Service Discovery ##########################################
173#
174# If this setting is set to "yes", service information will be published with
175# Zeroconf / Avahi.
176#
177#zeroconf_enabled "yes"
178#
179# The argument to this setting will be the Zeroconf / Avahi unique name for
180# this MPD server on the network.
181#
182#zeroconf_name "Music Player"
183#
184###############################################################################
185
186
187# Permissions #################################################################
188#
189# If this setting is set, MPD will require password authorization. The password
190# setting can be specified multiple times for different password profiles.
191#
192#password "password@read,add,control,admin"
193#
194# This setting specifies the permissions a user has who has not yet logged in.
195#
196#default_permissions "read,add,control,admin"
197#
198###############################################################################
199
200
201# Database #######################################################################
202#
203
204#database {
205# plugin "proxy"
206# host "other.mpd.host"
207# port "6600"
208#}
209
210# Input #######################################################################
211#
212
213input {
214 plugin "curl"
215# proxy "proxy.isp.com:8080"
216# proxy_user "user"
217# proxy_password "password"
218}
219
220#
221###############################################################################
222
223# Audio Output ################################################################
224#
225
226audio_output {
227 type "pulse"
228 name "pulse audio"
229}
230
231audio_output {
232 type "fifo"
233 name "my_fifo"
234 path "/tmp/mpd.fifo"
235 format "44100:16:2"
236}
237
238# MPD supports various audio output types, as well as playing through multiple
239# audio outputs at the same time, through multiple audio_output settings
240# blocks. Setting this block is optional, though the server will only attempt
241# autodetection for one sound card.
242#
243# An example of an ALSA output:
244#
245#audio_output {
246# type "alsa"
247# name "My ALSA Device"
248## device "hw:0,0" # optional
249## mixer_type "hardware" # optional
250## mixer_device "default" # optional
251## mixer_control "PCM" # optional
252## mixer_index "0" # optional
253#}
254#
255# An example of an OSS output:
256#
257#audio_output {
258# type "oss"
259# name "My OSS Device"
260## device "/dev/dsp" # optional
261## mixer_type "hardware" # optional
262## mixer_device "/dev/mixer" # optional
263## mixer_control "PCM" # optional
264#}
265#
266# An example of a shout output (for streaming to Icecast):
267#
268#audio_output {
269# type "shout"
270# encoder "vorbis" # optional
271# name "My Shout Stream"
272# host "localhost"
273# port "8000"
274# mount "/mpd.ogg"
275# password "hackme"
276# quality "5.0"
277# bitrate "128"
278# format "44100:16:1"
279## protocol "icecast2" # optional
280## user "source" # optional
281## description "My Stream Description" # optional
282## url "http://example.com" # optional
283## genre "jazz" # optional
284## public "no" # optional
285## timeout "2" # optional
286## mixer_type "software" # optional
287#}
288#
289# An example of a recorder output:
290#
291#audio_output {
292# type "recorder"
293# name "My recorder"
294# encoder "vorbis" # optional, vorbis or lame
295# path "/var/lib/mpd/recorder/mpd.ogg"
296## quality "5.0" # do not define if bitrate is defined
297# bitrate "128" # do not define if quality is defined
298# format "44100:16:1"
299#}
300#
301# An example of a httpd output (built-in HTTP streaming server):
302#
303#audio_output {
304# type "httpd"
305# name "My HTTP Stream"
306# encoder "vorbis" # optional, vorbis or lame
307# port "8000"
308# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
309## quality "5.0" # do not define if bitrate is defined
310# bitrate "128" # do not define if quality is defined
311# format "44100:16:1"
312# max_clients "0" # optional 0=no limit
313#}
314#
315# An example of a pulseaudio output (streaming to a remote pulseaudio server)
316#
317#audio_output {
318# type "pulse"
319# name "My Pulse Output"
320## server "remote_server" # optional
321## sink "remote_server_sink" # optional
322#}
323#
324# An example of a winmm output (Windows multimedia API).
325#
326#audio_output {
327# type "winmm"
328# name "My WinMM output"
329## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
330# or
331## device "0" # optional
332## mixer_type "hardware" # optional
333#}
334#
335# An example of an openal output.
336#
337#audio_output {
338# type "openal"
339# name "My OpenAL output"
340## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
341#}
342#
343# An example of an sndio output.
344#
345#audio_output {
346# type "sndio"
347# name "sndio output"
348# mixer_type "software"
349#}
350#
351# An example of an OS X output:
352#
353#audio_output {
354# type "osx"
355# name "My OS X Device"
356## device "Built-in Output" # optional
357## channel_map "-1,-1,0,1" # optional
358#}
359#
360## Example "pipe" output:
361#
362#audio_output {
363# type "pipe"
364# name "my pipe"
365# command "aplay -f cd 2>/dev/null"
366## Or if you're want to use AudioCompress
367# command "AudioCompress -m | aplay -f cd 2>/dev/null"
368## Or to send raw PCM stream through PCM:
369# command "nc example.org 8765"
370# format "44100:16:2"
371#}
372#
373## An example of a null output (for no audio output):
374#
375#audio_output {
376# type "null"
377# name "My Null Output"
378# mixer_type "none" # optional
379#}
380#
381###############################################################################
382
383
384# Normalization automatic volume adjustments ##################################
385#
386# This setting specifies the type of ReplayGain to use. This setting can have
387# the argument "off", "album", "track" or "auto". "auto" is a special mode that
388# chooses between "track" and "album" depending on the current state of
389# random playback. If random playback is enabled then "track" mode is used.
390# See <http://www.replaygain.org> for more details about ReplayGain.
391# This setting is off by default.
392#
393#replaygain "album"
394#
395# This setting sets the pre-amp used for files that have ReplayGain tags. By
396# default this setting is disabled.
397#
398#replaygain_preamp "0"
399#
400# This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
401# By default this setting is disabled.
402#
403#replaygain_missing_preamp "0"
404#
405# This setting enables or disables ReplayGain limiting.
406# MPD calculates actual amplification based on the ReplayGain tags
407# and replaygain_preamp / replaygain_missing_preamp setting.
408# If replaygain_limit is enabled MPD will never amplify audio signal
409# above its original level. If replaygain_limit is disabled such amplification
410# might occur. By default this setting is enabled.
411#
412#replaygain_limit "yes"
413#
414# This setting enables on-the-fly normalization volume adjustment. This will
415# result in the volume of all playing audio to be adjusted so the output has
416# equal "loudness". This setting is disabled by default.
417#
418#volume_normalization "no"
419#
420###############################################################################
421
422# Character Encoding ##########################################################
423#
424# If file or directory names do not display correctly for your locale then you
425# may need to modify this setting.
426#
427#filesystem_charset "UTF-8"
428#
429###############################################################################
430#+end_src
431
59027673
AB
432** ncmpcpp
433
434*** config
435:PROPERTIES:
436:header-args+: :tangle ~/.ncmpcpp/config
437:END:
438
439#+begin_src conf :tangle no
440##############################################################
441## This is the example configuration file. Copy it to ##
442## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
443## and set up your preferences. ##
444##############################################################
445#
446##### directories ######
447##
448## Directory for storing ncmpcpp related files.
449## Changing it is useful if you want to store
450## everything somewhere else and provide command
451## line setting for alternative location to config
452## file which defines that while launching ncmpcpp.
453##
454#
455ncmpcpp_directory = ~/.ncmpcpp
456#
457##
458## Directory for storing downloaded lyrics. It
459## defaults to ~/.lyrics since other MPD clients
460## (eg. ncmpc) also use that location.
461##
462#
463#lyrics_directory = ~/.lyrics
464#
465##### connection settings #####
466#
467#mpd_host = localhost
468#
469#mpd_port = 6600
470#
471#mpd_connection_timeout = 5
472#
473## Needed for tag editor and file operations to work.
474##
475mpd_music_dir = ~/usr/music
476#
477#mpd_crossfade_time = 5
478#
479##### music visualizer #####
480##
481## Note: In order to make music visualizer work you'll
482## need to use mpd fifo output, whose format parameter
483## has to be set to 44100:16:1 for mono visualization
484## or 44100:16:2 for stereo visualization. Example
485## configuration (it has to be put into mpd.conf):
486##
487## audio_output {
488## type "fifo"
489## name "Visualizer feed"
490## path "/tmp/mpd.fifo"
491## format "44100:16:2"
492## }
493##
494#
495visualizer_fifo_path = /tmp/mpd.fifo
496#
497##
498## Note: Below parameter is needed for ncmpcpp
499## to determine which output provides data for
500## visualizer and thus allow syncing between
501## visualization and sound as currently there
502## are some problems with it.
503##
504#
505visualizer_output_name = my fifo
506#
507##
508## If you set format to 44100:16:2, make it 'yes'.
509##
510visualizer_in_stereo = yes
511#
512##
513## Multiply received samples by given value. Very
514## useful for proper visualization of quiet music.
515##
516#visualizer_sample_multiplier = 1
517#
518##
519## Note: Below parameter defines how often ncmpcpp
520## has to "synchronize" visualizer and audio outputs.
521## 30 seconds is optimal value, but if you experience
522## synchronization problems, set it to lower value.
523## Keep in mind that sane values start with >=10.
524##
525#
526visualizer_sync_interval = 30
527#
528##
529## Note: To enable spectrum frequency visualization
530## you need to compile ncmpcpp with fftw3 support.
531##
532#
533## Available values: spectrum, wave, wave_filled, ellipse.
534##
535visualizer_type = spectrum
536#
537#visualizer_look = ●▮
538visualizer_look = "●•"
539#
540#visualizer_color = blue, cyan, green, yellow, magenta, red
541#
542## Alternative subset of 256 colors for terminals that support it.
543##
544#visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
545#
546##### system encoding #####
547##
548## ncmpcpp should detect your charset encoding
549## but if it failed to do so, you can specify
550## charset encoding you are using here.
551##
552## Note: You can see whether your ncmpcpp build
553## supports charset detection by checking output
554## of `ncmpcpp --version`.
555##
556## Note: Since MPD uses UTF-8 by default, setting
557## this option makes sense only if your encoding
558## is different.
559##
560#
561#system_encoding = ""
562#
563##### delays #####
564#
565## Time of inactivity (in seconds) after playlist
566## highlighting will be disabled (0 = always on).
567##
568#playlist_disable_highlight_delay = 5
569#
570## Defines how long messages are supposed to be visible.
571##
572#message_delay_time = 5
573#
574##### song format #####
575##
576## For a song format you can use:
577##
578## %l - length
579## %f - filename
580## %D - directory
581## %a - artist
582## %A - album artist
583## %t - title
584## %b - album
585## %y - date
586## %n - track number (01/12 -> 01)
587## %N - full track info (01/12 -> 01/12)
588## %g - genre
589## %c - composer
590## %p - performer
591## %d - disc
592## %C - comment
593## %P - priority
594## $R - begin right alignment
595##
596## If you want to make sure that a part of the format is displayed
597## only when certain tags are present, you can archieve it by
598## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
599## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
600## It is also possible to define a list of alternatives by providing
601## several groups and separating them with '|', e.g. '{%t}|{%f}'
602## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
603## present.
604##
605## Note: If you want to set limit on maximal length of a tag, just
606## put the appropriate number between % and character that defines
607## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
608##
609## In addition, formats support markers used for text attributes.
610## They are followed by character '$'. After that you can put:
611##
612## - 0 - default window color (discards all other colors)
613## - 1 - black
614## - 2 - red
615## - 3 - green
616## - 4 - yellow
617## - 5 - blue
618## - 6 - magenta
619## - 7 - cyan
620## - 8 - white
621## - 9 - end of current color
622## - b - bold text
623## - u - underline text
624## - r - reverse colors
625## - a - use alternative character set
626##
627## If you don't want to use a non-color attribute anymore, just put it
628## again, but this time insert character '/' between '$' and attribute
629## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
630## or filename with reversed colors.
631##
632## If you want to use 256 colors and/or background colors in formats
633## (the naming scheme is described below in section about color
634## definitions), it can be done with the syntax $(COLOR), e.g. to set
635## the artist tag to one of the non-standard colors and make it have
636## yellow background, you need to write $(197_yellow)%a$(end). Note
637## that for standard colors this is interchangable with attributes
638## listed above.
639##
640## Note: colors can be nested.
641##
642#
643#song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
644#
645#song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
646#
647#song_library_format = {%n - }{%t}|{%f}
648#
649#
650#alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
651#
652#alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
653#
654#now_playing_prefix = $b
655#
656#now_playing_suffix = $/b
657#
658#browser_playlist_prefix = "$2playlist$9 "
659#
660#selected_item_prefix = $6
661#
662#selected_item_suffix = $9
663#
664#modified_item_prefix = $3> $9
665#
666##
667## Note: attributes are not supported for the following variables.
668##
669#song_window_title_format = {%a - }{%t}|{%f}
670##
671## Note: Below variables are used for sorting songs in browser.
672## The sort mode determines how songs are sorted, and can be used
673## in combination with a sort format to specify a custom sorting format.
674## Available values for browser_sort_mode are "name", "mtime", "format"
675## and "noop".
676##
677#
678#browser_sort_mode = name
679#
680#browser_sort_format = {%a - }{%t}|{%f} {(%l)}
681#
682##### columns settings #####
683##
684## syntax of song columns list format is "column column etc."
685##
686## - syntax for each column is:
687##
688## (width of the column)[color of the column]{displayed tag}
689##
690## Note: Width is by default in %, if you want a column to
691## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
692## will be the column that take 10% of screen (so the real width
693## will depend on actual screen size), whereas (10f)[white]{a}
694## will take 10 terminal cells, no matter how wide the screen is.
695##
696## - color is optional (if you want the default one,
697## leave the field empty).
698##
699## Note: You can give a column additional attributes by putting appropriate
700## character after displayed tag character. Available attributes are:
701##
702## - r - column will be right aligned
703## - E - if tag is empty, empty tag marker won't be displayed
704##
705## You can also:
706##
707## - give a column custom name by putting it after attributes,
708## separated with character ':', e.g. {lr:Length} gives you
709## right aligned column of lengths named "Length".
710##
711## - define sequence of tags, that have to be displayed in case
712## predecessor is empty in a way similar to the one in classic
713## song format, i.e. using '|' character, e.g. {a|c|p:Owner}
714## creates column named "Owner" that tries to display artist
715## tag and then composer and performer if previous ones are
716## not available.
717##
718#
719#song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
720#
721##### various settings #####
722#
723##
724## Note: Custom command that will be executed each
725## time song changes. Useful for notifications etc.
726##
727#execute_on_song_change = ""
728#
729#playlist_show_mpd_host = no
730#
731#playlist_show_remaining_time = no
732#
733#playlist_shorten_total_times = no
734#
735#playlist_separate_albums = no
736#
737##
738## Note: Possible display modes: classic, columns.
739##
740#playlist_display_mode = columns
741#
742#browser_display_mode = classic
743#
744#search_engine_display_mode = classic
745#
746#playlist_editor_display_mode = classic
747#
748#discard_colors_if_item_is_selected = yes
749#
750#incremental_seeking = yes
751#
752#seek_time = 1
753#
754#volume_change_step = 2
755#
756#autocenter_mode = no
757#
758#centered_cursor = no
759#
760##
761## Note: You can specify third character which will
762## be used to build 'empty' part of progressbar.
763##
764#progressbar_look = =>
765progressbar_look = "─╼╶"
766#progressbar_look = "─⊙╶"
767#
768#progressbar_boldness = yes
769#
770## Available values: database, playlist.
771##
772#default_place_to_search_in = database
773#
774## Available values: classic, alternative.
775##
776#user_interface = classic
777#
778#data_fetching_delay = yes
779#
780## Available values: artist, album_artist, date, genre, composer, performer.
781##
782#media_library_primary_tag = artist
783#
784## Available values: wrapped, normal.
785##
786#default_find_mode = wrapped
787#
788#default_tag_editor_pattern = %n - %t
789#
790#header_visibility = yes
791#
792#statusbar_visibility = yes
793#
794#titles_visibility = yes
795#
796#header_text_scrolling = yes
797#
798#cyclic_scrolling = no
799#
800#lines_scrolled = 2
801#
802#follow_now_playing_lyrics = no
803#
804#fetch_lyrics_for_current_song_in_background = no
805#
806#store_lyrics_in_song_dir = no
807#
808#generate_win32_compatible_filenames = yes
809#
810#allow_for_physical_item_deletion = no
811#
812##
813## Note: If you set this variable, ncmpcpp will try to
814## get info from last.fm in language you set and if it
815## fails, it will fall back to english. Otherwise it will
816## use english the first time.
817##
818## Note: Language has to be expressed as an ISO 639 alpha-2 code.
819##
820#lastfm_preferred_language = en
821#
822#show_hidden_files_in_local_browser = no
823#
824##
825## How shall screen switcher work?
826##
827## - "previous" - switch between the current and previous screen.
828## - "screen1,...,screenN" - switch between given sequence of screens.
829##
830## Screens available for use: help, playlist, browser, search_engine,
831## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
832##
833#screen_switcher_mode = playlist, browser
834#
835##
836## Note: You can define startup screen
837## by choosing screen from the list above.
838##
839#startup_screen = playlist
840#
841##
842## Note: You can define startup slave screen
843## by choosing screen from the list above or
844## an empty value for no slave screen.
845##
846#startup_slave_screen = ""
847#
848#startup_slave_screen_focus = no
849#
850##
851## Default width of locked screen (in %).
852## Acceptable values are from 20 to 80.
853##
854#
855#locked_screen_width_part = 50
856#
857#ask_for_locked_screen_width_part = yes
858#
859#jump_to_now_playing_song_at_start = yes
860#
861#ask_before_clearing_playlists = yes
862#
863#clock_display_seconds = no
864#
865#display_volume_level = yes
866#
867#display_bitrate = no
868#
869#display_remaining_time = no
870#
871## Available values: none, basic, extended, perl.
872##
873#regular_expressions = perl
874#
875##
876## Note: If below is enabled, ncmpcpp will ignore leading
877## "The" word while sorting items in browser, tags in
878## media library, etc.
879##
880#ignore_leading_the = no
881#
882#block_search_constraints_change_if_items_found = yes
883#
884#mouse_support = yes
885#
886#mouse_list_scroll_whole_page = yes
887#
888#empty_tag_marker = <empty>
889#
890#tags_separator = " | "
891#
892#tag_editor_extended_numeration = no
893#
894#media_library_sort_by_mtime = no
895#
896#enable_window_title = yes
897#
898##
899## Note: You can choose default search mode for search
900## engine. Available modes are:
901##
902## - 1 - use mpd built-in searching (no regexes, pattern matching)
903## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
904## but if your mpd is on a remote machine, downloading big database
905## to process it can take a while
906## - 3 - match only exact values (this mode uses mpd function for searching
907## in database and local one for searching in current playlist)
908##
909#
910#search_engine_default_search_mode = 1
911#
912#external_editor = nano
913#
914## Note: set to yes if external editor is a console application.
915##
916#use_console_editor = yes
917#
918##### colors definitions #####
919##
920## It is possible to set a background color by setting a color
921## value "<foreground>_<background>", e.g. red_black will set
922## foregound color to red and background color to black.
923##
924## In addition, for terminals that support 256 colors it
925## is possible to set one of them by using a number in range
926## [1, 256] instead of color name, e.g. numerical value
927## corresponding to red_black is 2_1. To find out if the
928## terminal supports 256 colors, run ncmpcpp and check out
929## the bottom of the help screen for list of available colors
930## and their numerical values.
931##
932## Note: due to technical limitations of ncurses, if 256 colors
933## are used, it is possible to either use only the colors with
934## default background color, or all pairs from 1_1 up to 254_127,
935## depending on the ncurses version used.
936##
937#
938#colors_enabled = yes
939#
940#empty_tag_color = cyan
941#
942#header_window_color = default
943#
944#volume_color = default
945#
946#state_line_color = default
947#
948#state_flags_color = default
949#
950#main_window_color = yellow
951#
952#color1 = white
953#
954#color2 = green
955#
956#main_window_highlight_color = yellow
957#
958#progressbar_color = black
959#
960#progressbar_elapsed_color = green
961#
962#statusbar_color = default
963#
964#alternative_ui_separator_color = black
965#
966#active_column_color = red
967#
968#window_border_color = green
969#
970#active_window_border = red
971#
972#+end_src
973
974*** bindings
975:PROPERTIES:
976:header-args+: :tangle ~/.ncmpcpp/bindings
977:END:
978
979#+begin_src conf :tangle no
980def_key "j"
981 scroll_down
982def_key "k"
983 scroll_up
984
985def_key "ctrl-u"
986 page_up
987def_key "ctrl-d"
988 page_down
989
990def_key "h"
991 previous_column
992def_key "l"
993 next_column
994
995def_key "."
996 show_lyrics
997
998def_key "n"
999 next_found_item
1000def_key "N"
1001 previous_found_item
1002
1003def_key "J"
1004 move_sort_order_down
1005def_key "K"
1006 move_sort_order_up
1007#+end_src
1008
8e15d300 1009** pigeonhole
541ddfdf 1010*** amin.sieve
8e15d300 1011:PROPERTIES:
b507a0ef 1012:header-args+: :tangle ~/mail/bndl.org/amin/sieve/amin.sieve :comments none
8e15d300
AB
1013:END:
1014
1015#+begin_src conf
541ddfdf
AB
1016require ["regex", "variables", "fileinto", "envelope",
1017 "mailbox", "imap4flags", "include"];
8e15d300 1018
541ddfdf 1019# webmasters
8e15d300 1020if anyof (
541ddfdf
AB
1021 address :is "from" ["webmasters@gnu.org", "webmasters-comment@gnu.org"]) {
1022 fileinto :create "gnu.webmasters";
8e15d300
AB
1023 stop;
1024}
1025
1026include :personal "lists";
1027#+end_src
1028
1029*** lists.sieve
1030:PROPERTIES:
b507a0ef 1031:header-args+: :tangle ~/mail/bndl.org/amin/sieve/lists.sieve :comments none
8e15d300
AB
1032:END:
1033
1034#+begin_src conf
541ddfdf
AB
1035require ["regex", "variables", "fileinto", "envelope",
1036 "mailbox", "imap4flags", "include"];
8e15d300 1037
541ddfdf 1038# mailing lists
8e15d300 1039if anyof (
541ddfdf
AB
1040 header :contains "list-id"
1041 [ "<emacs-devel.gnu.org>"
1042 , "<emacs-orgmode.gnu.org>"
1043 , "<emacsconf-discuss.gnu.org>"
1044 , "<fencepost-users.gnu.org>"
1045 , "<guix-devel.gnu.org>"
1046 , "<guile-devel.gnu.org>"
1047 , "<help-gnu-emacs.gnu.org>"
1048 , "<info-gnu-emacs.gnu.org>"
1049 , "<info-guix.gnu.org>"
1050 , "<www-commits.gnu.org>"
1051 , "<www-discuss.gnu.org>"
1052 , "<deepspec.lists.cs.princeton.edu>"
1053 , "<haskell-cafe.haskell.org>"
1054 , "<haskell-art.we.lurk.org>"
1055 , "<notmuch.notmuchmail.org>"
1056 ] ) {
8e15d300
AB
1057 if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
1058 set :lower "listname" "${1}";
541ddfdf
AB
1059 fileinto :create "gnu.${listname}";
1060 stop;
8e15d300
AB
1061 }
1062}
b6c1036f 1063
541ddfdf 1064# sr.ht lists, with dots ('.') omitted
b6c1036f 1065if anyof (
541ddfdf
AB
1066 header :contains "list-id"
1067 [ "<~bandali/public-inbox@lists.sr.ht>"
1068 , "<~sircmpwn/sr.ht-admins@lists.sr.ht>"
1069 , "<~sircmpwn/sr.ht-announce@lists.sr.ht>"
1070 , "<~sircmpwn/sr.ht-dev@lists.sr.ht>"
1071 , "<~sircmpwn/sr.ht-discuss@lists.sr.ht>"
1072 ] ) {
1073 if header :regex "list-id" "(~[a-z_0-9-]+)/([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)@" {
b6c1036f 1074 set :lower "username" "${1}";
541ddfdf
AB
1075 set :lower "listname" "${2}${3}${4}${5}${6}${7}";
1076 fileinto :create "gnu.${username}.${listname}";
1077 stop;
b6c1036f
AB
1078 }
1079}
8e15d300
AB
1080#+end_src
1081
2f1dcf9d
AB
1082** redshift
1083:PROPERTIES:
e2149232 1084:header-args+: :tangle ~/.config/redshift.conf :comments none
2f1dcf9d
AB
1085:END:
1086
1087#+begin_src conf
1088; Global settings for redshift
1089[redshift]
1090; Set the day and night screen temperatures (Neutral is 6500K)
1091;temp-day=5700
1092;temp-night=3500
1093
1094;temp-day=6500
1095temp-day=6200
1096;temp-night=4800
1097;temp-night=5000
1098;temp-night=4500
1099temp-night=4000
1100
1101; Enable/Disable a smooth transition between day and night
1102; 0 will cause a direct change from day to night screen temperature.
1103; 1 will gradually increase or decrease the screen temperature.
1104transition=1
1105
1106; Set the screen brightness. Default is 1.0.
1107;brightness=0.9
1108; It is also possible to use different settings for day and night
1109; since version 1.8.
1110;brightness-day=0.7
1111;brightness-night=0.4
1112; Set the screen gamma (for all colors, or each color channel
1113; individually)
1114;gamma=0.8
1115;gamma=1.0
1116;gamma=0.8:0.7:0.8
1117; This can also be set individually for day and night since
1118; version 1.10.
1119;gamma-day=0.8:0.7:0.8
1120;gamma-night=0.6
1121
1122; Set the location-provider: 'geoclue2' or 'manual'
1123; type 'redshift -l list' to see possible values.
1124; The location provider settings are in a different section.
1125;location-provider=manual
1126location-provider=geoclue2
1127
1128; Set the adjustment-method: 'randr', 'vidmode'
1129; type 'redshift -m list' to see all possible values.
1130; 'randr' is the preferred method, 'vidmode' is an older API.
1131; but works in some cases when 'randr' does not.
1132; The adjustment method settings are in a different section.
1133adjustment-method=randr
1134
1135; Configuration of the location-provider:
1136; type 'redshift -l PROVIDER:help' to see the settings.
1137; ex: 'redshift -l manual:help'
1138; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
1139; are negative numbers.
1140;[manual]
1141;lat=48.1
1142;lon=11.6
1143
1144; Configuration of the adjustment-method
1145; type 'redshift -m METHOD:help' to see the settings.
1146; ex: 'redshift -m randr:help'
1147; In this example, randr is configured to adjust screen 1.
1148; Note that the numbering starts from 0, so this is actually the
1149; second screen. If this option is not specified, Redshift will try
1150; to adjust _all_ screens.
1151;[randr]
1152;screen=1
1153#+end_src
1154
339f55ac
AB
1155** systemd
1156
1157Keep boot messages on tty1 (see [[https://wiki.archlinux.org/index.php/getty#Have_boot_messages_stay_on_tty1][here]])
1158
c65377de 1159#+begin_src conf :tangle /sudo::/etc/systemd/system/getty@tty1.service.d/noclear.conf
339f55ac
AB
1160[Service]
1161TTYVTDisallocate=no
1162#+end_src
ad65bea0 1163
08e87a0a
AB
1164** TLP
1165
d7144515
AB
1166*** langa
1167
1168#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "langa")) "/sudo::/etc/default/tlp")
1169# ------------------------------------------------------------------------------
1170# tlp - Parameters for power saving
7069ec69 1171# See full explanation: https://linrunner.de/en/tlp/docs/tlp-configuration.html
d7144515 1172
7069ec69
AB
1173# Notes:
1174# - Some parameters are disabled, remove the leading '#' to enable # them;
1175# shown values are suggestions not defaults
1176# - Default *: intrinsic default that is effective when the parameter is missing
1177# or disabled by a leading '#'; use PARAM="" to disable intrinsic defaults for
1178# parameters with text string values
1179# - Default <none>: do nothing or use kernel/hardware defaults
d7144515
AB
1180
1181# Set to 0 to disable, 1 to enable TLP.
7069ec69 1182# Default: 0
d7144515
AB
1183TLP_ENABLE=1
1184
1185# Operation mode when no power supply can be detected: AC, BAT.
1186# Concerns some desktop and embedded hardware only.
7069ec69 1187# Default: <none>
d7144515
AB
1188TLP_DEFAULT_MODE=AC
1189
1190# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
1191# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
7069ec69 1192# Default: 0
d7144515
AB
1193TLP_PERSISTENT_DEFAULT=0
1194
1195# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
1196# Non-zero value enables, zero disables laptop mode.
7069ec69 1197# Default: 0 (AC), 2 (BAT)
d7144515
AB
1198DISK_IDLE_SECS_ON_AC=0
1199DISK_IDLE_SECS_ON_BAT=2
1200
1201# Dirty page values (timeouts in secs).
7069ec69 1202# Default: 15 (AC + BAT)
d7144515
AB
1203MAX_LOST_WORK_SECS_ON_AC=15
1204MAX_LOST_WORK_SECS_ON_BAT=60
1205
7069ec69
AB
1206# Note: CPU parameters below are disabled by default, remove the leading #
1207# to enable them, otherwise kernel defaults will be used.
d7144515
AB
1208
1209# Select a CPU frequency scaling governor.
1210# Intel Core i processor with intel_pstate driver:
1211# powersave(*), performance.
1212# Older hardware with acpi-cpufreq driver:
1213# ondemand(*), powersave, performance, conservative, schedutil.
1214# (*) is recommended.
7069ec69 1215# Use tlp-stat -p to show the active driver and available governors.
d7144515
AB
1216# Important:
1217# powersave for intel_pstate and ondemand for acpi-cpufreq are power
1218# efficient for *almost all* workloads and therefore kernel and most
1219# distributions have chosen them as defaults. If you still want to change,
1220# you should know what you're doing! You *must* disable your distribution's
1221# governor settings or conflicts will occur.
7069ec69 1222# Default: <none>
d7144515
AB
1223#CPU_SCALING_GOVERNOR_ON_AC=powersave
1224#CPU_SCALING_GOVERNOR_ON_BAT=powersave
1225
1226# Set the min/max frequency available for the scaling governor.
7069ec69 1227# Possible values depend on your CPU. For available frequencies see
d7144515 1228# the output of tlp-stat -p.
7069ec69 1229# Default: <none>
d7144515
AB
1230#CPU_SCALING_MIN_FREQ_ON_AC=0
1231#CPU_SCALING_MAX_FREQ_ON_AC=0
1232#CPU_SCALING_MIN_FREQ_ON_BAT=0
1233#CPU_SCALING_MAX_FREQ_ON_BAT=0
1234
1235# Set energy performance hints (HWP) for Intel P-state governor:
1236# performance, balance_performance, default, balance_power, power
1237# Values are given in order of increasing power saving.
1238# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
7069ec69 1239# Default: <none>
d7144515
AB
1240CPU_HWP_ON_AC=balance_performance
1241CPU_HWP_ON_BAT=balance_power
1242
1243# Set Intel P-state performance: 0..100 (%).
1244# Limit the max/min P-state to control the power dissipation of the CPU.
1245# Values are stated as a percentage of the available performance.
1246# Requires an Intel Core i processor with intel_pstate driver.
7069ec69 1247# Default: <none>
d7144515
AB
1248#CPU_MIN_PERF_ON_AC=0
1249#CPU_MAX_PERF_ON_AC=100
1250#CPU_MIN_PERF_ON_BAT=0
1251#CPU_MAX_PERF_ON_BAT=30
1252
1253# Set the CPU "turbo boost" feature: 0=disable, 1=allow
1254# Requires an Intel Core i processor.
1255# Important:
1256# - This may conflict with your distribution's governor settings
1257# - A value of 1 does *not* activate boosting, it just allows it
7069ec69 1258# Default: <none>
d7144515
AB
1259#CPU_BOOST_ON_AC=1
1260#CPU_BOOST_ON_BAT=0
1261
1262# Minimize number of used CPU cores/hyper-threads under light load conditions:
1263# 0=disable, 1=enable.
7069ec69 1264# Default: <none>
d7144515
AB
1265SCHED_POWERSAVE_ON_AC=0
1266SCHED_POWERSAVE_ON_BAT=1
1267
1268# Kernel NMI Watchdog:
1269# 0=disable (default, saves power), 1=enable (for kernel debugging only).
7069ec69 1270# Default: <none>
d7144515
AB
1271NMI_WATCHDOG=0
1272
1273# Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
1274# Frequency voltage pairs are written to:
1275# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
1276# CAUTION: only use this, if you thoroughly understand what you are doing!
7069ec69 1277# Default: <none>.
d7144515
AB
1278#PHC_CONTROLS="F:V F:V F:V F:V"
1279
1280# Set CPU performance versus energy savings policy:
1281# performance, balance-performance, default, balance-power, power.
1282# Values are given in order of increasing power saving.
1283# Requires kernel module msr and x86_energy_perf_policy from linux-tools.
7069ec69 1284# Default: <none>
d7144515
AB
1285ENERGY_PERF_POLICY_ON_AC=performance
1286ENERGY_PERF_POLICY_ON_BAT=balance-power
1287
7069ec69 1288# Disk devices; separate multiple devices with spaces.
d7144515 1289# Devices can be specified by disk ID also (lookup with: tlp diskid).
7069ec69
AB
1290# Note: DISK parameters below are effective only when this option is configured.
1291# Default: "nvme0n1 sda"
d7144515
AB
1292DISK_DEVICES="sda sdb"
1293
1294# Disk advanced power management level: 1..254, 255 (max saving, min, off).
1295# Levels 1..127 may spin down the disk; 255 allowable on most drives.
1296# Separate values for multiple disks with spaces. Use the special value 'keep'
1297# to keep the hardware default for the particular disk.
7069ec69 1298# Default: <none>
d7144515
AB
1299DISK_APM_LEVEL_ON_AC="254 254"
1300DISK_APM_LEVEL_ON_BAT="128 128"
1301
1302# Hard disk spin down timeout:
1303# 0: spin down disabled
1304# 1..240: timeouts from 5s to 20min (in units of 5s)
1305# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
1306# See 'man hdparm' for details.
1307# Separate values for multiple disks with spaces. Use the special value 'keep'
1308# to keep the hardware default for the particular disk.
7069ec69 1309# Default: <none>
d7144515
AB
1310#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
1311#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
1312
7069ec69
AB
1313# Select I/O scheduler for the disk devices.
1314# Multi queue (blk-mq) schedulers:
1315# mq-deadline(*), none, kyber, bfq
1316# Single queue schedulers:
1317# deadline(*), cfq, bfq, noop
1318# (*) recommended.
d7144515
AB
1319# Separate values for multiple disks with spaces. Use the special value 'keep'
1320# to keep the kernel default scheduler for the particular disk.
7069ec69
AB
1321# Notes:
1322# - Multi queue (blk-mq) may need kernel boot option 'scsi_mod.use_blk_mq=1'
1323# and 'modprobe mq-deadline-iosched|kyber|bfq' on kernels < 5.0
1324# - Single queue schedulers are legacy now and were removed together with
1325# the old block layer in kernel 5.0
1326# Default: keep
1327#DISK_IOSCHED="mq-deadline mq-deadline"
d7144515
AB
1328
1329# AHCI link power management (ALPM) for disk devices:
1330# min_power, med_power_with_dipm(*), medium_power, max_performance.
1331# (*) Kernel >= 4.15 required, then recommended.
1332# Multiple values separated with spaces are tried sequentially until success.
7069ec69 1333# Default: <none>
d7144515
AB
1334SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
1335SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
1336
1337# Exclude host devices from AHCI link power management.
1338# Separate multiple hosts with spaces.
7069ec69 1339# Default: <none>
d7144515
AB
1340#SATA_LINKPWR_BLACKLIST="host1"
1341
1342# Runtime Power Management for AHCI host and disks devices:
1343# on=disable, auto=enable.
7069ec69
AB
1344# EXPERIMENTAL ** WARNING: auto may cause system lockups/data loss.
1345# Default: <none>
d7144515
AB
1346#AHCI_RUNTIME_PM_ON_AC=on
1347#AHCI_RUNTIME_PM_ON_BAT=on
1348
1349# Seconds of inactivity before disk is suspended.
7069ec69
AB
1350# Note: effective only when AHCI_RUNTIME_PM_ON_AC/BAT is activated.
1351# Default: 15
d7144515
AB
1352AHCI_RUNTIME_PM_TIMEOUT=15
1353
1354# PCI Express Active State Power Management (PCIe ASPM):
7069ec69
AB
1355# default(*), performance, powersave.
1356# (*) keeps BIOS ASPM defaults (recommended)
1357# Default: <none>
1358#PCIE_ASPM_ON_AC=default
1359#PCIE_ASPM_ON_BAT=default
1360
1361# Set the min/max/turbo frequency for the Intel GPU.
1362# Possible values depend on your hardware. For available frequencies see
1363# the output of tlp-stat -g.
1364# Default: <none>
1365#INTEL_GPU_MIN_FREQ_ON_AC=0
1366#INTEL_GPU_MIN_FREQ_ON_BAT=0
1367#INTEL_GPU_MAX_FREQ_ON_AC=0
1368#INTEL_GPU_MAX_FREQ_ON_BAT=0
1369#INTEL_GPU_BOOST_FREQ_ON_AC=0
1370#INTEL_GPU_BOOST_FREQ_ON_BAT=0
d7144515
AB
1371
1372# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
7069ec69
AB
1373# auto = mid on BAT, high on AC.
1374# Default: default
1375RADEON_POWER_PROFILE_ON_AC=default
1376RADEON_POWER_PROFILE_ON_BAT=default
d7144515
AB
1377
1378# Radeon dynamic power management method (DPM): battery, performance.
7069ec69 1379# Default: <none>
d7144515
AB
1380RADEON_DPM_STATE_ON_AC=performance
1381RADEON_DPM_STATE_ON_BAT=battery
1382
1383# Radeon DPM performance level: auto, low, high; auto is recommended.
7069ec69
AB
1384# Note: effective only when RADEON_DPM_STATE_ON_AC/BAT is activated.
1385# Default: auto
d7144515
AB
1386RADEON_DPM_PERF_LEVEL_ON_AC=auto
1387RADEON_DPM_PERF_LEVEL_ON_BAT=auto
1388
1389# WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
7069ec69 1390# Default: <none>
d7144515
AB
1391WIFI_PWR_ON_AC=off
1392WIFI_PWR_ON_BAT=on
1393
1394# Disable wake on LAN: Y/N.
7069ec69 1395# Default: N
d7144515
AB
1396WOL_DISABLE=Y
1397
1398# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
1399# A value of 0 disables, >=1 enables power saving (recommended: 1).
7069ec69 1400# Default: <none>
d7144515
AB
1401SOUND_POWER_SAVE_ON_AC=0
1402SOUND_POWER_SAVE_ON_BAT=0
1403
1404# Disable controller too (HDA only): Y/N.
7069ec69
AB
1405# Note: effective only when SOUND_POWER_SAVE_ON_AC/BAT is activated.
1406# Default: Y
d7144515
AB
1407SOUND_POWER_SAVE_CONTROLLER=N
1408
1409# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
1410# Drive can be powered on again by releasing (and reinserting) the eject lever
1411# or by pressing the disc eject button on newer models.
1412# Note: an UltraBay/MediaBay hard disk is never powered off.
7069ec69 1413# Default: 0
d7144515
AB
1414BAY_POWEROFF_ON_AC=0
1415BAY_POWEROFF_ON_BAT=0
7069ec69
AB
1416# Optical drive device to power off
1417# Default: sr0
d7144515
AB
1418BAY_DEVICE="sr0"
1419
1420# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
7069ec69 1421# Default: <none>
d7144515
AB
1422RUNTIME_PM_ON_AC=on
1423RUNTIME_PM_ON_BAT=auto
1424
1425# Exclude PCI(e) device adresses the following list from Runtime PM
1426# (separate with spaces). Use lspci to get the adresses (1st column).
7069ec69 1427# Default: <none>
d7144515
AB
1428#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
1429
1430# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
1431# Default when unconfigured is "amdgpu nouveau nvidia radeon" which
1432# prevents accidential power-on of dGPU in hybrid graphics setups.
d7144515 1433# Separate multiple drivers with spaces.
7069ec69
AB
1434# Default: "amdgpu mei_me nouveau nvidia pcieport radeon", use "" to disable
1435# completely.
1436#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu mei_me nouveau nvidia pcieport radeon"
d7144515
AB
1437
1438# Set to 0 to disable, 1 to enable USB autosuspend feature.
7069ec69 1439# Default: 0
d7144515
AB
1440USB_AUTOSUSPEND=1
1441
1442# Exclude listed devices from USB autosuspend (separate with spaces).
1443# Use lsusb to get the ids.
1444# Note: input devices (usbhid) are excluded automatically
7069ec69 1445# Default: <none>
d7144515
AB
1446#USB_BLACKLIST="1111:2222 3333:4444"
1447
1448# Bluetooth devices are excluded from USB autosuspend:
1449# 0=do not exclude, 1=exclude.
7069ec69 1450# Default: 0
d7144515
AB
1451USB_BLACKLIST_BTUSB=0
1452
1453# Phone devices are excluded from USB autosuspend:
1454# 0=do not exclude, 1=exclude (enable charging).
7069ec69 1455# Default: 0
d7144515
AB
1456USB_BLACKLIST_PHONE=0
1457
1458# Printers are excluded from USB autosuspend:
1459# 0=do not exclude, 1=exclude.
7069ec69 1460# Default: 1
d7144515
AB
1461USB_BLACKLIST_PRINTER=1
1462
1463# WWAN devices are excluded from USB autosuspend:
1464# 0=do not exclude, 1=exclude.
7069ec69
AB
1465# Default: 0
1466USB_BLACKLIST_WWAN=0
d7144515
AB
1467
1468# Include listed devices into USB autosuspend even if already excluded
7069ec69
AB
1469# by the blacklists above (separate with spaces). Use lsusb to get the ids.
1470# Default: <none>
d7144515
AB
1471#USB_WHITELIST="1111:2222 3333:4444"
1472
1473# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
1474# (workaround for USB devices that cause shutdown problems).
7069ec69 1475# Default: 0
d7144515
AB
1476#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
1477
1478# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
1479# on system startup: 0=disable, 1=enable.
7069ec69
AB
1480# Note: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
1481# are ignored when this is enabled.
1482# Default: 0
d7144515 1483#RESTORE_DEVICE_STATE_ON_STARTUP=0
9a123361 1484RESTORE_DEVICE_STATE_ON_STARTUP=1
d7144515
AB
1485
1486# Radio devices to disable on startup: bluetooth, wifi, wwan.
1487# Separate multiple devices with spaces.
7069ec69 1488# Default: <none>
d7144515
AB
1489#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
1490
1491# Radio devices to enable on startup: bluetooth, wifi, wwan.
1492# Separate multiple devices with spaces.
7069ec69 1493# Default: <none>
d7144515
AB
1494#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
1495
1496# Radio devices to disable on shutdown: bluetooth, wifi, wwan.
1497# (workaround for devices that are blocking shutdown).
7069ec69 1498# Default: <none>
d7144515
AB
1499#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
1500
1501# Radio devices to enable on shutdown: bluetooth, wifi, wwan.
1502# (to prevent other operating systems from missing radios).
7069ec69 1503# Default: <none>
d7144515
AB
1504#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
1505
1506# Radio devices to enable on AC: bluetooth, wifi, wwan.
7069ec69 1507# Default: <none>
d7144515
AB
1508#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
1509
1510# Radio devices to disable on battery: bluetooth, wifi, wwan.
7069ec69 1511# Default: <none>
d7144515 1512#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
9a123361 1513DEVICES_TO_DISABLE_ON_BAT="bluetooth"
d7144515
AB
1514
1515# Radio devices to disable on battery when not in use (not connected):
1516# bluetooth, wifi, wwan.
7069ec69 1517# Default: <none>
d7144515
AB
1518#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
1519
1520# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
1521# required). Charging starts when the remaining capacity falls below the
1522# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
1523# Main / Internal battery (values in %)
7069ec69 1524# Default: <none>
d7144515
AB
1525#START_CHARGE_THRESH_BAT0=75
1526#STOP_CHARGE_THRESH_BAT0=80
1527# Ultrabay / Slice / Replaceable battery (values in %)
7069ec69 1528# Default: <none>
d7144515
AB
1529#START_CHARGE_THRESH_BAT1=75
1530#STOP_CHARGE_THRESH_BAT1=80
1531
1532# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
7069ec69 1533# Default: 0
d7144515
AB
1534#RESTORE_THRESHOLDS_ON_BAT=1
1535
7069ec69
AB
1536# Battery feature drivers: 0=disable, 1=enable
1537# Default: 1 (all)
1538NATACPI_ENABLE=1
1539TPACPI_ENABLE=1
1540TPSMAPI_ENABLE=1
1541
d7144515
AB
1542# ------------------------------------------------------------------------------
1543# tlp-rdw - Parameters for the radio device wizard
1544# Possible devices: bluetooth, wifi, wwan.
1545
7069ec69 1546# Notes:
d7144515
AB
1547# - Parameters are disabled by default, remove the leading # to enable them
1548# - Separate multiple radio devices with spaces
1549
7069ec69
AB
1550# Default: <none> (for all parameters below)
1551
d7144515
AB
1552# Radio devices to disable on connect.
1553#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
1554#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
1555#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
1556
1557# Radio devices to enable on disconnect.
1558#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
1559#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
1560#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
1561
1562# Radio devices to enable/disable when docked.
1563#DEVICES_TO_ENABLE_ON_DOCK=""
1564#DEVICES_TO_DISABLE_ON_DOCK=""
1565
1566# Radio devices to enable/disable when undocked.
1567#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
1568#DEVICES_TO_DISABLE_ON_UNDOCK=""
1569#+end_src
1570
0d78df2f 1571*** shemshak
08e87a0a 1572
0d78df2f 1573#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "shemshak")) "/sudo::/etc/default/tlp")
08e87a0a
AB
1574# ------------------------------------------------------------------------------
1575# tlp - Parameters for power saving
1576# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
1577
1578# Hint: some features are disabled by default, remove the leading # to enable
1579# them.
1580
1581# Set to 0 to disable, 1 to enable TLP.
1582TLP_ENABLE=1
1583
1584# Operation mode when no power supply can be detected: AC, BAT.
1585# Concerns some desktop and embedded hardware only.
1586TLP_DEFAULT_MODE=AC
1587
1588# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
1589# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
1590TLP_PERSISTENT_DEFAULT=0
1591
1592# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
1593# Non-zero value enables, zero disables laptop mode.
1594DISK_IDLE_SECS_ON_AC=0
1595DISK_IDLE_SECS_ON_BAT=2
1596
1597# Dirty page values (timeouts in secs).
1598MAX_LOST_WORK_SECS_ON_AC=15
1599MAX_LOST_WORK_SECS_ON_BAT=60
1600
1601# Hint: CPU parameters below are disabled by default, remove the leading #
1602# to enable them, otherwise kernel default values are used.
1603
1604# Select a CPU frequency scaling governor.
1605# Intel Core i processor with intel_pstate driver:
1606# powersave(*), performance.
1607# Older hardware with acpi-cpufreq driver:
1608# ondemand(*), powersave, performance, conservative, schedutil.
1609# (*) is recommended.
1610# Hint: use tlp-stat -p to show the active driver and available governors.
1611# Important:
1612# powersave for intel_pstate and ondemand for acpi-cpufreq are power
1613# efficient for *almost all* workloads and therefore kernel and most
1614# distributions have chosen them as defaults. If you still want to change,
1615# you should know what you're doing! You *must* disable your distribution's
1616# governor settings or conflicts will occur.
1617#CPU_SCALING_GOVERNOR_ON_AC=powersave
1618#CPU_SCALING_GOVERNOR_ON_BAT=powersave
1619
1620# Set the min/max frequency available for the scaling governor.
1621# Possible values strongly depend on your CPU. For available frequencies see
1622# the output of tlp-stat -p.
1623#CPU_SCALING_MIN_FREQ_ON_AC=0
1624#CPU_SCALING_MAX_FREQ_ON_AC=0
1625#CPU_SCALING_MIN_FREQ_ON_BAT=0
1626#CPU_SCALING_MAX_FREQ_ON_BAT=0
1627
1628# Set energy performance hints (HWP) for Intel P-state governor:
1629# performance, balance_performance, default, balance_power, power
1630# Values are given in order of increasing power saving.
1631# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
1632CPU_HWP_ON_AC=balance_performance
1633CPU_HWP_ON_BAT=balance_power
1634
1635# Set Intel P-state performance: 0..100 (%).
1636# Limit the max/min P-state to control the power dissipation of the CPU.
1637# Values are stated as a percentage of the available performance.
1638# Requires an Intel Core i processor with intel_pstate driver.
1639#CPU_MIN_PERF_ON_AC=0
1640#CPU_MAX_PERF_ON_AC=100
1641#CPU_MIN_PERF_ON_BAT=0
1642#CPU_MAX_PERF_ON_BAT=30
1643
1644# Set the CPU "turbo boost" feature: 0=disable, 1=allow
1645# Requires an Intel Core i processor.
1646# Important:
1647# - This may conflict with your distribution's governor settings
1648# - A value of 1 does *not* activate boosting, it just allows it
1649#CPU_BOOST_ON_AC=1
1650#CPU_BOOST_ON_BAT=0
1651
1652# Minimize number of used CPU cores/hyper-threads under light load conditions:
1653# 0=disable, 1=enable.
1654SCHED_POWERSAVE_ON_AC=0
1655SCHED_POWERSAVE_ON_BAT=1
1656
1657# Kernel NMI Watchdog:
1658# 0=disable (default, saves power), 1=enable (for kernel debugging only).
1659NMI_WATCHDOG=0
1660
1661# Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
1662# Frequency voltage pairs are written to:
1663# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
1664# CAUTION: only use this, if you thoroughly understand what you are doing!
1665#PHC_CONTROLS="F:V F:V F:V F:V"
1666
1667# Set CPU performance versus energy savings policy:
1668# performance, balance-performance, default, balance-power, power.
1669# Values are given in order of increasing power saving.
1670# Requires kernel module msr and x86_energy_perf_policy from linux-tools.
1671ENERGY_PERF_POLICY_ON_AC=performance
1672ENERGY_PERF_POLICY_ON_BAT=balance-power
1673
1674# Disk devices; separate multiple devices with spaces (default: sda).
1675# Devices can be specified by disk ID also (lookup with: tlp diskid).
1676DISK_DEVICES="sda sdb"
1677
1678# Disk advanced power management level: 1..254, 255 (max saving, min, off).
1679# Levels 1..127 may spin down the disk; 255 allowable on most drives.
1680# Separate values for multiple disks with spaces. Use the special value 'keep'
1681# to keep the hardware default for the particular disk.
1682DISK_APM_LEVEL_ON_AC="254 254"
1683DISK_APM_LEVEL_ON_BAT="128 128"
1684
1685# Hard disk spin down timeout:
1686# 0: spin down disabled
1687# 1..240: timeouts from 5s to 20min (in units of 5s)
1688# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
1689# See 'man hdparm' for details.
1690# Separate values for multiple disks with spaces. Use the special value 'keep'
1691# to keep the hardware default for the particular disk.
1692#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
1693#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
1694
1695# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
1696# Separate values for multiple disks with spaces. Use the special value 'keep'
1697# to keep the kernel default scheduler for the particular disk.
1698#DISK_IOSCHED="cfq cfq"
1699
1700# AHCI link power management (ALPM) for disk devices:
1701# min_power, med_power_with_dipm(*), medium_power, max_performance.
1702# (*) Kernel >= 4.15 required, then recommended.
1703# Multiple values separated with spaces are tried sequentially until success.
1704SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
1705SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
1706
1707# Exclude host devices from AHCI link power management.
1708# Separate multiple hosts with spaces.
1709#SATA_LINKPWR_BLACKLIST="host1"
1710
1711# Runtime Power Management for AHCI host and disks devices:
1712# on=disable, auto=enable.
1713# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
1714#AHCI_RUNTIME_PM_ON_AC=on
1715#AHCI_RUNTIME_PM_ON_BAT=on
1716
1717# Seconds of inactivity before disk is suspended.
1718AHCI_RUNTIME_PM_TIMEOUT=15
1719
1720# PCI Express Active State Power Management (PCIe ASPM):
1721# default, performance, powersave.
1722PCIE_ASPM_ON_AC=performance
1723PCIE_ASPM_ON_BAT=powersave
1724
1725# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
1726# auto = mid on BAT, high on AC; default = use hardware defaults.
1727RADEON_POWER_PROFILE_ON_AC=high
1728RADEON_POWER_PROFILE_ON_BAT=low
1729
1730# Radeon dynamic power management method (DPM): battery, performance.
1731RADEON_DPM_STATE_ON_AC=performance
1732RADEON_DPM_STATE_ON_BAT=battery
1733
1734# Radeon DPM performance level: auto, low, high; auto is recommended.
1735RADEON_DPM_PERF_LEVEL_ON_AC=auto
1736RADEON_DPM_PERF_LEVEL_ON_BAT=auto
1737
1738# WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
1739WIFI_PWR_ON_AC=off
1740WIFI_PWR_ON_BAT=on
1741
1742# Disable wake on LAN: Y/N.
1743WOL_DISABLE=Y
1744
1745# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
1746# A value of 0 disables, >=1 enables power saving (recommended: 1).
1747SOUND_POWER_SAVE_ON_AC=0
1748SOUND_POWER_SAVE_ON_BAT=0
1749
1750# Disable controller too (HDA only): Y/N.
1751SOUND_POWER_SAVE_CONTROLLER=N
1752
1753# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
1754# Drive can be powered on again by releasing (and reinserting) the eject lever
1755# or by pressing the disc eject button on newer models.
1756# Note: an UltraBay/MediaBay hard disk is never powered off.
1757BAY_POWEROFF_ON_AC=0
1758BAY_POWEROFF_ON_BAT=0
1759# Optical drive device to power off (default sr0).
1760BAY_DEVICE="sr0"
1761
1762# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
1763RUNTIME_PM_ON_AC=on
1764RUNTIME_PM_ON_BAT=auto
1765
1766# Exclude PCI(e) device adresses the following list from Runtime PM
1767# (separate with spaces). Use lspci to get the adresses (1st column).
1768#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
1769RUNTIME_PM_BLACKLIST="01:00.0"
1770
1771# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
1772# Default when unconfigured is "amdgpu nouveau nvidia radeon" which
1773# prevents accidential power-on of dGPU in hybrid graphics setups.
1774# Use "" to disable the feature completely.
1775# Separate multiple drivers with spaces.
1776#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
1777
1778# Set to 0 to disable, 1 to enable USB autosuspend feature.
1779USB_AUTOSUSPEND=1
1780
1781# Exclude listed devices from USB autosuspend (separate with spaces).
1782# Use lsusb to get the ids.
1783# Note: input devices (usbhid) are excluded automatically
1784#USB_BLACKLIST="1111:2222 3333:4444"
1785
1786# Bluetooth devices are excluded from USB autosuspend:
1787# 0=do not exclude, 1=exclude.
1788USB_BLACKLIST_BTUSB=0
1789
1790# Phone devices are excluded from USB autosuspend:
1791# 0=do not exclude, 1=exclude (enable charging).
1792USB_BLACKLIST_PHONE=0
1793
1794# Printers are excluded from USB autosuspend:
1795# 0=do not exclude, 1=exclude.
1796USB_BLACKLIST_PRINTER=1
1797
1798# WWAN devices are excluded from USB autosuspend:
1799# 0=do not exclude, 1=exclude.
1800USB_BLACKLIST_WWAN=1
1801
1802# Include listed devices into USB autosuspend even if already excluded
1803# by the blacklists above (separate with spaces).
1804# Use lsusb to get the ids.
1805#USB_WHITELIST="1111:2222 3333:4444"
1806
1807# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
1808# (workaround for USB devices that cause shutdown problems).
1809#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
1810
1811# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
1812# on system startup: 0=disable, 1=enable.
1813# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
1814# are ignored when this is enabled!
1815#RESTORE_DEVICE_STATE_ON_STARTUP=0
1816RESTORE_DEVICE_STATE_ON_STARTUP=1
1817
1818# Radio devices to disable on startup: bluetooth, wifi, wwan.
1819# Separate multiple devices with spaces.
1820#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
1821
1822# Radio devices to enable on startup: bluetooth, wifi, wwan.
1823# Separate multiple devices with spaces.
1824#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
1825
1826# Radio devices to disable on shutdown: bluetooth, wifi, wwan.
1827# (workaround for devices that are blocking shutdown).
1828#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
1829
1830# Radio devices to enable on shutdown: bluetooth, wifi, wwan.
1831# (to prevent other operating systems from missing radios).
1832#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
1833
1834# Radio devices to enable on AC: bluetooth, wifi, wwan.
1835#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
1836
1837# Radio devices to disable on battery: bluetooth, wifi, wwan.
1838#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
1839
1840# Radio devices to disable on battery when not in use (not connected):
1841# bluetooth, wifi, wwan.
1842#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
1843
1844# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
1845# required). Charging starts when the remaining capacity falls below the
1846# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
1847# Main / Internal battery (values in %)
1848#START_CHARGE_THRESH_BAT0=75
1849#STOP_CHARGE_THRESH_BAT0=80
1850# Ultrabay / Slice / Replaceable battery (values in %)
1851#START_CHARGE_THRESH_BAT1=75
1852#STOP_CHARGE_THRESH_BAT1=80
1853
1854# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
1855#RESTORE_THRESHOLDS_ON_BAT=1
1856
1857# ------------------------------------------------------------------------------
1858# tlp-rdw - Parameters for the radio device wizard
1859# Possible devices: bluetooth, wifi, wwan.
1860
1861# Hints:
1862# - Parameters are disabled by default, remove the leading # to enable them
1863# - Separate multiple radio devices with spaces
1864
1865# Radio devices to disable on connect.
1866#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
1867#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
1868#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
1869
1870# Radio devices to enable on disconnect.
1871#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
1872#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
1873#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
1874
1875# Radio devices to enable/disable when docked.
1876#DEVICES_TO_ENABLE_ON_DOCK=""
1877#DEVICES_TO_DISABLE_ON_DOCK=""
1878
1879# Radio devices to enable/disable when undocked.
1880#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
1881#DEVICES_TO_DISABLE_ON_UNDOCK=""
1882#+end_src
1883