[rc/sway] super+shift+return for floating urxvt terminal
[~bandali/configs] / rc.org
... / ...
CommitLineData
1#+title: rc.org
2#+property: header-args :comments link :mkdirp yes :results silent
3
4* About
5
6This org file contains the configuration files of pretty much every
7program I use. The files are tangled (i.e. exported, or derived) from
8this file using =org-babel=.
9
10Note: This file is best viewed inside Emacs with org mode.
11
12* Configs
13
14This section contains the configuration files (dotfiles) of various
15programs I use.
16
17** bspwm
18
19*** bspwmrc
20:PROPERTIES:
21:header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
22:END:
23
24#+begin_src sh :tangle no
25sxhkd &
26sh ~/.fehbg &
27xfce4-panel -d &
28compton &
29sleep 0.5 && pasystray --notify=all &
30
31bspc monitor -d I II III IV V VI VII VIII IX X
32#bspc monitor eDP-1 -d I II III IV V
33#bspc monitor HDMI-1 -d VI VII VIII IX X
34
35#bspc config border_width 2
36#bspc config window_gap 8
37bspc config window_gap 0
38
39bspc config bottom_padding 26
40
41bspc config split_ratio 0.52
42bspc config borderless_monocle true
43bspc config gapless_monocle true
44bspc config click_to_focus button1
45bspc config directional_focus_tightness low
46
47#bspc rule -a Firefox desktop='^1' follow=on
48bspc rule -a Nightly desktop='^1' follow=on
49bspc rule -a Emacs desktop='^2' state=tiled follow=on
50#bspc rule -a Chromium desktop='^4' follow=on
51bspc rule -a URxvt state=floating
52bspc rule -a URxvt:tiled state=tiled
53bspc rule -a Connman-gtk state=floating
54bspc rule -a Xfce4-panel state=floating
55bspc rule -a TelegramDesktop state=floating
56bspc rule -a Ec state=floating
57bspc rule -a Pavucontrol state=floating
58bspc rule -a Eog state=floating
59bspc rule -a Seahorse state=floating
60bspc rule -a mpv state=floating
61bspc rule -a Evince state=floating
62bspc rule -a Meld state=floating
63bspc rule -a Autokey-gtk state=floating
64bspc rule -a Mousepad state=floating
65bspc rule -a Wrapper-1.0 state=floating
66bspc rule -a File-roller state=floating
67bspc rule -a Gnome-disks state=floating
68bspc rule -a Termite state=floating
69bspc rule -a Termite:tiled state=tiled
70bspc rule -a Thunderbird:Calendar state=floating
71bspc rule -a Audacity state=floating
72bspc rule -a Proof state=floating # pvs x-show-proof
73bspc rule -a Nm-connection-editor state=floating
74bspc rule -a Wire state=floating
75bspc rule -a discord state=floating
76bspc rule -a X2goclient state=floating
77bspc rule -a SimpleScreenRecorder state=floating
78bspc rule -a Gimp state=floating
79bspc rule -a Wrapper-2.0 state=floating
80bspc rule -a Zathura state=tiled
81#+end_src
82
83*** sxhkdrc
84:PROPERTIES:
85:header-args+: :tangle ~/.config/sxhkd/sxhkdrc
86:END:
87
88#+begin_src conf :tangle no
89#
90# wm independent hotkeys
91#
92
93# terminal emulator
94super + {_,shift} + Return
95 urxvt{_, -name tiled}
96
97#super + {_,shift} + Return
98# termite{_, --name=tiled}
99
100# program launcher
101super + space
102 rofi -show run -display-run '> ' -display-window ' 🗔 '
103
104super + alt + space
105 xfce4-popup-whiskermenu
106
107# window finder
108super + backslash
109 rofi -show window -display-run '> ' -display-window ' 🗔 '
110
111# password manager
112alt + space
113 rofi-pass
114
115# firefox
116#super + r
117# firefox
118
119# chromium
120#super + c
121# chromium -incognito
122
123# emacs
124super + e
125 emacs
126
127# make sxhkd reload its configuration files:
128super + Escape
129 pkill -USR1 -x sxhkd
130
131# volume {up,down}
132XF86Audio{Raise,Lower}Volume
133 pamixer --allow-boost --{in,de}crease 5
134
135# mute
136XF86AudioMute
137 pamixer --toggle-mute
138
139XF86AudioMicMute
140 pactl set-source-mute 1 toggle
141
142# playback control
143XF86Audio{Play,Prev,Next}
144 mpc {toggle,prev,next}
145
146# lock the screen
147super + shift + q
148 light-locker-command -l
149
150# Toggle keyboard layout
151super + F7
152 toggle-layout
153
154# Toggle Xfce presentation mode
155XF86LaunchB
156 toggle-presentation-mode
157
158# monitor brightness
159XF86MonBrightness{Up,Down}
160 light -{A,U} 5
161
162super + apostrophe
163 rofi-light
164
165# keyboard brightness
166#XF86KbdBrightness{Up,Down}
167# kbdlight {up,down}
168
169XF86RotateWindows
170 toggle-tablet
171
172#
173# bspwm hotkeys
174#
175
176# quit bspwm normally
177super + alt + Escape
178 bspc quit
179
180# close and kill
181super + {w,q}
182 bspc node -{c,k}
183
184# alternate between the tiled and monocle layout
185super + m
186 bspc desktop -l next
187
188# send the newest marked node to the newest preselected node
189super + y
190 bspc node newest.marked.local -n newest.!automatic.local
191
192# swap the current node and the biggest node
193super + g
194 bspc node -s biggest
195
196#
197# state/flags
198#
199
200# set the window state
201super + {t,shift + t,s,f}
202 bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
203
204# set the node flags
205super + ctrl + {m,x,y,z}
206 bspc node -g {marked,locked,sticky,private}
207
208#
209# focus/swap
210#
211
212# focus the node in the given direction
213super + {_,shift + }{h,j,k,l}
214 bspc node -{f,s} {west,south,north,east}
215
216# focus the node for the given path jump
217super + {p,b,comma,period}
218 bspc node -f @{parent,brother,first,second}
219
220# focus the next/previous node in the current desktop
221super + {_,shift + }c
222 bspc node -f {next,prev}.local
223
224# focus the next/previous desktop in the current monitor
225super + bracket{left,right}
226 bspc desktop -f {prev,next}.local
227
228# send to next/prev desktop
229super + shift + bracket{left,right}
230 bspc node -d {prev,next} --follow
231
232# focus the last node/desktop
233super + {grave,Tab}
234 bspc {node,desktop} -f last
235
236# focus the older or newer node in the focus history
237super + {o,i}
238 bspc wm -h off; \
239 bspc node {older,newer} -f; \
240 bspc wm -h on
241
242# focus or send to the given desktop
243super + {_,shift + }{1-9,0}
244 bspc {desktop -f,node -d} '^{1-9,10}'
245
246#
247# preselect
248#
249
250# preselect the direction
251super + ctrl + {h,j,k,l}
252 bspc node -p {west,south,north,east}
253
254# preselect the ratio
255super + ctrl + {1-9}
256 bspc node -o 0.{1-9}
257
258# cancel the preselection for the focused node
259super + ctrl + space
260 bspc node -p cancel
261
262# cancel the preselection for the focused desktop
263super + ctrl + shift + space
264 bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
265
266#
267# move/resize
268#
269
270# expand a window by moving one of its side outward
271super + alt + {h,j,k,l}
272 bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
273
274# contract a window by moving one of its side inward
275super + alt + shift + {h,j,k,l}
276 bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
277
278# move a floating window
279super + {Left,Down,Up,Right}
280 bspc node -v {-20 0,0 20,0 -20,20 0}
281
282#alt + bracket{left,right}
283# xdotool key --clearmodifiers ctrl+Page_{Up,Down}
284#+end_src
285
286** compton
287:PROPERTIES:
288:header-args+: :tangle ~/.config/compton.conf
289:END:
290
291#+begin_src conf :tangle no
292# Shadow
293shadow = false; # Enabled client-side shadows on windows.
294no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows.
295no-dnd-shadow = true; # Don't draw shadows on DND windows.
296clear-shadow = true; # Zero the part of the shadow's mask behind the
297 # window. Fix some weirdness with ARGB windows.
298shadow-radius = 5; # The blur radius for shadows. (default 12)
299shadow-offset-x = -5; # The left offset for shadows. (default -15)
300shadow-offset-y = -5; # The top offset for shadows. (default -15)
301# shadow-opacity = 0.7; # The translucency for shadows. (default .75)
302# shadow-red = 0.0; # Red color value of shadow. (0.0 - 1.0, defaults to 0)
303# shadow-green = 0.0; # Green color value of shadow. (0.0 - 1.0, defaults to 0)
304# shadow-blue = 0.0; # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
305shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ]; # Exclude conditions for shadows.
306# shadow-exclude = "n:e:Notification";
307#shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
308shadow-ignore-shaped = true; # Avoid drawing shadow on all shaped windows
309 # (see also: --detect-rounded-corners)
310
311# Opacity
312menu-opacity = 1.0; # The opacity for menus. (default 1.0)
313#inactive-opacity = 0.9; # Default opacity of inactive windows. (0.0 - 1.0)
314# active-opacity = 0.8; # Default opacity for active windows. (0.0 - 1.0)
315frame-opacity = 1.0; # Opacity of window titlebars and borders. (0.1 - 1.0)
316# inactive-opacity-override = true; # Let inactive opacity set by 'inactive-opacity' overrides
317 # value of _NET_WM_OPACITY. Bad choice.
318alpha-step = 0.06; # XRender backend: Step size for alpha pictures. Increasing
319 # it may result in less X resource usage,
320 # Yet fading may look bad.
321#inactive-dim = 0.5; # Dim inactive windows. (0.0 - 1.0)
322#inactive-dim-fixed = true; # Do not let dimness adjust based on window opacity.
323# blur-background = true; # Blur background of transparent windows.
324 # Bad performance with X Render backend.
325 # GLX backend is preferred.
326# blur-background-frame = true; # Blur background of opaque windows with transparent
327 # frames as well.
328blur-background-fixed = true; # Do not let blur radius adjust based on window opacity.
329blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
330 # Exclude conditions for background blur.
331
332# Fading
333fading = false; # Fade windows during opacity changes.
334fade-delta = 3; # The time between steps in a fade in milliseconds. (default 10).
335fade-in-step = 0.03; # Opacity change between steps while fading in. (default 0.028).
336fade-out-step = 0.03; # Opacity change between steps while fading out. (default 0.03).
337# no-fading-openclose = true; # Avoid fade windows in/out when opening/closing.
338fade-exclude = [ ]; # Exclude conditions for fading.
339
340# Other
341backend = "glx" # Backend to use: "xrender" or "glx". GLX backend is typically
342 # much faster but depends on a sane driver.
343mark-wmwin-focused = true; # Try to detect WM windows and mark them as active.
344mark-ovredir-focused = true; # Mark all non-WM but override-redirect windows active (e.g. menus).
345use-ewmh-active-win = true; # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
346 # instead of using FocusIn/Out events. Usually more reliable but
347 # depends on a EWMH-compliant WM.
348detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
349detect-client-opacity = true; # Detect _NET_WM_OPACITY on client windows, useful for window
350 # managers not passing _NET_WM_OPACITY of client windows to frame
351 # windows.
352refresh-rate = 0; # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
353vsync = "drm"; # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
354 # See man page for more details.
355dbe = false; # Enable DBE painting mode. Rarely needed.
356paint-on-overlay = true; # Painting on X Composite overlay window. Recommended.
357sw-opti = false; # Limit compton to repaint at most once every 1 / refresh_rate.
358 # Incompatible with certain VSync methods.
359unredir-if-possible = false; # Unredirect all windows if a full-screen opaque window is
360 # detected, to maximize performance for full-screen windows.
361focus-exclude = [ ]; # A list of conditions of windows that should always be considered
362 # focused.
363detect-transient = true; # Use WM_TRANSIENT_FOR to group windows, and consider windows in
364 # the same group focused at the same time.
365detect-client-leader = true; # Use WM_CLIENT_LEADER to group windows.
366invert-color-include = [ ]; # Conditions for windows to be painted with inverted color.
367
368# GLX backend # GLX backend fine-tune options. See man page for more info.
369glx-no-stencil = true; # Recommended.
370glx-copy-from-front = false; # Useful with --glx-swap-method,
371# glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
372# glx-no-rebind-pixmap = true; # Recommended if it works.
373glx-no-rebind-pixmap = true; # Recommended if it works.
374#glx-swap-method = "4"; # See man page.
375glx-swap-method = "4"; # See man page.
376
377# Window type settings
378wintypes:
379{
380 tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
381 menu = { shadow = false; };
382 dropdown_menu = { shadow = false; };
383 popup_menu = { shadow = false; };
384 utility = { shadow = false; };
385 # fade: Fade the particular type of windows.
386 # shadow: Give those windows shadow
387 # opacity: Default opacity for the type of windows.
388 # focus: Whether to always consider windows of this type focused.
389};
390#+end_src
391
392** dovecot
393:PROPERTIES:
394:header-args+: :tangle "/sudo::/etc/dovecot/dovecot.conf"
395:END:
396
397#+begin_src conf
398protocols = imap
399
400listen = 127.0.0.1
401log_path = /var/log/dovecot.log
402info_log_path = /var/log/dovecot-info.log
403
404ssl = no
405disable_plaintext_auth = no
406
407auth_verbose = yes
408auth_mechanisms = plain
409
410passdb {
411 driver = passwd-file
412 args = /etc/dovecot/passwd
413}
414
415userdb {
416 driver = static
417 args = uid=amin gid=amin home=/home/amin/mail/%d/%n
418 default_fields = mail=maildir:/home/amin/mail/%d/%n/mail
419}
420
421# mail_home = /home/amin/mail/%d/%n
422# mail_location = maildir:/home/amin/mail/%d/%n/mail:LAYOUT=fs:INBOX=/home/amin/mail/%d/%n/mail/Inbox
423
424# namespace {
425# inbox = yes
426# separator = /
427# }
428
429mail_plugins = $mail_plugins fts fts_lucene
430
431plugin {
432 fts = lucene
433 fts_lucene = whitespace_chars=@.
434 fts_autoindex = yes
435}
436#+end_src
437
438** Dunst
439:PROPERTIES:
440:header-args+: :tangle ~/.config/dunst/dunstrc
441:END:
442
443#+begin_src conf
444[global]
445#font = Ubuntu Mono 10.5
446font = Inconsolata 11
447
448# Path to default icons.
449icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
450
451icon_position = left
452# <b>bold</b>
453# <i>italic</i>
454# <s>strikethrough<s/>
455# <u>underline</u>
456markup = full
457# The format of the message. Possible variables are:
458# %a appname
459# %s summary
460# %b body
461# %i iconname (including its path)
462# %I iconname (without its path)
463# %p progress value if set ([ 0%] to [100%]) or nothing
464# Markup is allowed
465format = "<b>%s</b>\n%b"
466# Sort messages by urgency
467sort = yes
468# Show how many messages are currently hidden (because of geometry)
469indicate_hiddenl= no
470# Alignment of message text.
471# Possible values are "left", "center" and "right"
472alignment = center
473# The frequency with wich text that is longer than the notification
474# window allows bounces back and forth.
475# This option conflicts with 'word_wrap'.
476# Set to 0 to disable
477bounce_freq = 3
478# show age of message if message is older than show_age_threshold seconds.
479# set to -1 to disable
480show_age_threshold = -1
481# split notifications into multiple lines if they don't fit into geometry
482word_wrap = yes
483# ignore newlines '\n' in notifications
484ignore_newline = no
485# The geometry of the message window.
486# geometry [{width}]x{height}][+/-{x}+/-{y}]
487# The height is measured in number of notifications everything else in pixels. If the width
488# is omitted but the height is given ("-geometry x2"), the message window
489# expands over the whole screen (dmenu-like). If width is 0,
490# the window expands to the longest message displayed.
491# A positive x is measured from the left, a negative from the
492# right side of the screen. Y is measured from the top and down respectevly.
493# The width can be negative. In this case the actual width is the
494# screen width minus the width defined in within the geometry option.
495#geometry = "410x12-12+12"
496#geometry = "0x0-30-30"
497geometry = "260x12-30-30"
498# The transparency of the window. range: [0; 100]
499# This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
500transparency = 0
501# Don't remove messages, if the user is idle (no mouse or keyboard input)
502# for longer than idle_threshold seconds.
503# Set to 0 to disable.
504idle_threshold = 120
505# Which monitor should the notifications be displayed on.
506monitor = 0
507# Display notification on focused monitor. Possible modes are:
508# mouse: follow mouse pointer
509# keyboard: follow window with keyboard focus
510# none: don't follow anything
511#
512# "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
513# This should be the case for almost all modern windowmanagers.
514#
515# If this option is set to mouse or keyboard, the monitor option will be
516# ignored.
517follow = keyboard
518# should a notification popped up from history be sticky or
519# timeout as if it would normally do.
520sticky_history = yes
521# The height of a single line. If the height is smaller than the font height,
522# it will get raised to the font height.
523# This adds empty space above and under the text.
524line_height = 0
525
526show_indicators = yes
527
528# Draw a line of 'separatpr_height' pixel height between two notifications.
529# Set to 0 to disable
530separator_height = 3
531# padding between text and separator
532padding = 8
533# horizontal padding
534horizontal_padding = 8
535# Define a color for the separator.
536# possible values are:
537# * auto: dunst tries to find a color fitting to the background
538# * foreground: use the same color as the foreground
539# * frame: use the same color as the frame.
540# * anything else will be interpreted as a X color
541separator_color = foreground
542# print a notification on startup
543# This is mainly for error detection, since dbus (re-)starts dunst
544# automatically after a crash.
545startup_notification = false
546# dmenu path
547#dmenu = /usr/bin/dmenu -p dunst:
548dmenu = /usr/bin/rofi -dmenu -p dunst:
549# browser for opening urls in context menu
550browser = /usr/bin/firefox -new-tab
551[frame]
552width = 0
553color = "#377222"
554[shortcuts]
555# shortcuts are specified as [modifier+][modifier+]...key
556# available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
557# and 'mod4' (windows-key)
558# xev might be helpful to find names for keys
559# close notification
560close = ctrl+space
561# close all notifications
562close_all = ctrl+shift+space
563# redisplay last message(s)
564# On the US keyboard layout 'grave' is normally above TAB and left of '1'.
565history = ctrl+shift+h
566# context menu
567context = ctrl+shift+period
568[urgency_low]
569# IMPORTANT: colors have to be defined in quotation marks.
570# Otherwise the '#' and following would be interpreted as a comment.
571background = "#1d2a30"
572foreground = "#71c2af"
573timeout = 3
574[urgency_normal]
575background = "#1d2a30"
576foreground = "#71c2af"
577timeout = 0
578[urgency_critical]
579background = "#1d2a30"
580foreground = "#ff9982"
581timeout = 0
582
583# Every section that isn't one of the above is interpreted as a rules
584# to override settings for certain messages.
585# Messages can be matched by 'appname', 'summary', 'body' or 'icon'
586# and you can override the 'timeout', 'urgency', 'foreground', 'background'
587# and 'format'.
588# Shell-like globbing will get expanded.
589#
590# SCRIPTING
591# you can specify a script that gets run when the rule matches by setting
592# the 'script' option.
593# The script will be called as follows:
594# script appname summary body icon urgency
595# where urgency can be "LOW", "NORMAL" or "CRITICAL".
596#
597# NOTE: if you don't want a notification to be displayed, set the format to ""
598# NOTE: It might be helpful to run dunst -print in a terminal in order to find
599# fitting options for rules.
600#[espeak]
601# summary = "*"
602# script = dunst_espeak.sh
603#[script-test]
604# summary = "*script*"
605# script = dunst_test.sh
606#[ignore]
607## This notification will not be displayed
608# summary = "foobar"
609# format = ""
610#[signed_on]
611# appname = Pidgin
612# summary = "*signed on*"
613# urgency = low
614#
615#[signed_off]
616# appname = Pidgin
617# summary = *signed off*
618# urgency = low
619#
620#[says]
621# appname = Pidgin
622# summary = *says*
623# urgency = critical
624#
625#[twitter]
626# appname = Pidgin
627# summary = *twitter.com*
628# urgency = normal
629#
630[xfpm-backlight]
631 summary = *Brightness*
632 urgency = low
633#+end_src
634
635** Fontconfig
636:PROPERTIES:
637:header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
638:END:
639
640#+begin_src xml
641<?xml version="1.0"?>
642<!DOCTYPE fontconfig SYSTEM "fonts.dtd">
643<fontconfig>
644 <match target="font">
645 <edit mode="assign" name="rgba">
646 <const>rgb</const>
647 </edit>
648 </match>
649 <match target="font">
650 <edit mode="assign" name="hinting">
651 <bool>true</bool>
652 </edit>
653 </match>
654 <match target="font">
655 <edit mode="assign" name="hintstyle">
656 <const>hintslight</const>
657 </edit>
658 </match>
659 <match target="font">
660 <edit mode="assign" name="antialias">
661 <bool>true</bool>
662 </edit>
663 </match>
664 <match target="font">
665 <edit mode="assign" name="lcdfilter">
666 <const>lcddefault</const>
667 </edit>
668 </match>
669 <dir>~/.fonts</dir>
670
671 <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
672 <alias binding="same">
673 <family>Helvetica</family>
674 <prefer>
675 <family>Liberation Sans</family>
676 </prefer>
677</alias>
678</fontconfig>
679#+end_src
680
681** getmail
682
683*** getmailrc
684:PROPERTIES:
685:header-args+: :tangle ~/.getmail/getmailrc
686:END:
687
688#+begin_src conf
689[retriever]
690type = SimplePOP3SSLRetriever
691server = fencepost.gnu.org
692username = bandali
693password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
694port = 995
695use_apop = True
696
697[destination]
698type = Maildir
699path = ~/mail/gnu/Inbox/
700
701[options]
702delete = True
703#+end_src
704
705*** getmail.service
706:PROPERTIES:
707:header-args+: :tangle ~/.config/systemd/user/getmail.service
708:END:
709
710#+begin_src conf :tangle no
711[Unit]
712Description=getmail service
713
714[Service]
715Type=oneshot
716ExecStart=/usr/bin/getmail
717StandardOutput=syslog
718StandardError=syslog
719#+end_src
720
721*** getmail.timer
722:PROPERTIES:
723:header-args+: :tangle ~/.config/systemd/user/getmail.timer
724:END:
725
726#+begin_src conf :tangle no
727[Unit]
728Description=getmail timer
729
730[Timer]
731OnCalendar=*:0/30
732Persistent=true
733Unit=getmail.service
734
735[Install]
736WantedBy=timers.target
737#+end_src
738
739** Git
740
741*** gitconfig
742:PROPERTIES:
743:header-args+: :tangle ~/.gitconfig
744:END:
745
746**** user
747#+begin_src conf
748[user]
749 name = Amin Bandali
750 email = bandali@gnu.org
751 signingkey = BE6273738E616D6D1B3A08E8A21A020248816103
752#+end_src
753
754**** signing
755#+begin_src conf
756[commit]
757 gpgsign = true
758# [format]
759# signoff = true
760#+end_src
761
762**** core
763#+begin_src conf
764[core]
765 autocrlf = input # CRLF -> LF on commit
766 editor = emacsclient -t
767 excludesfile = ~/.gitignore_global
768 pager = "less"
769#+end_src
770
771**** gpg
772#+begin_src conf
773[gpg]
774 program = gpg2
775#+end_src
776
777**** alias
778#+begin_src conf
779[alias]
780 git = !exec git # handle nested git calls, e.g. git git status
781 aliases = config --get-regexp '^alias\\.'
782 a = add
783 s = status
784 sl = status --long
785 c = checkout
786 cb = checkout -b
787 b = branch
788 r = rebase
789 p = pull
790 pr = pull --rebase
791 ps = push
792 psf = push --force
793 nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f"
794 nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f"
795#+end_src
796
797**** color
798#+begin_src conf
799[color]
800 ui = auto
801[color "status"]
802 added = green bold
803 changed = red bold
804 untracked = red bold
805[color "branch"]
806 current = green bold
807 remote = magenta bold
808[color "diff"]
809 new = green bold
810 old = red bold
811#+end_src
812
813**** status
814#+begin_src conf
815[status]
816 # showUntrackedFiles = all
817 short=true
818 branch=true
819#+end_src
820
821**** github
822#+begin_src conf
823[github]
824 user = aminb
825#+end_src
826
827**** send-email
828#+begin_src conf
829[sendemail]
830 smtpuser = bandali
831 smtpserver = fencepost.gnu.org
832 smtpserverport = 587
833 smtpencryption = tls
834 annotate = yes
835#+end_src
836
837*** gitignore
838:PROPERTIES:
839:header-args+: :tangle ~/.gitignore_global
840:END:
841
842#+begin_src conf
843*.orig
844*.py[co]
845*.sublime-workspace
846*~
847.DS_Store
848*.elc
849*-autoloads.el
850#+end_src
851
852** GnuPG
853:PROPERTIES:
854:header-args+: :tangle ~/.gnupg/gpg-agent.conf
855:END:
856
857#+begin_src conf
858default-cache-ttl 43200
859max-cache-ttl 43200
860
861default-cache-ttl-ssh 10800
862max-cache-ttl-ssh 10800
863
864# pinentry-program /usr/bin/pinentry-qt
865#+end_src
866
867** GTK
868
869*** gtk-2.0
870:PROPERTIES:
871:header-args+: :tangle ~/.gtkrc-2.0
872:END:
873
874#+begin_src conf
875gtk-theme-name="Greybird"
876gtk-icon-theme-name="Paper"
877gtk-font-name="Ubuntu 10"
878gtk-menu-images=0
879# gtk-key-theme-name = "Emacs"
880#+end_src
881
882*** gtk-3.0
883:PROPERTIES:
884:header-args+: :tangle ~/.config/gtk-3.0/settings.ini
885:END:
886
887#+begin_src conf :tangle no
888[Settings]
889gtk-icon-theme-name = Paper
890# gtk-theme-name = Adwaita
891
892gtk-theme-name = Greybird
893# gtk-theme-name = Arc-Darker
894# gtk-theme-name = Numix-ArchBlue
895
896gtk-font-name = Ubuntu 10
897# gtk-key-theme-name = Emacs
898#+end_src
899
900** [[https://github.com/Leinnan/i3gs][i3gs]]
901:PROPERTIES:
902:header-args+: :tangle ~/.config/i3gs/config
903:END:
904
905#+begin_src conf :comments none :tangle no
906borders_width=0 0 2 0
907separator_width=10
908
909#[mpd]
910#preset=MPD
911#title=<span weight='heavy' fgcolor='#7FDBFF'> </span>
912#borders_color=#7FDBFF
913
914[ram]
915preset=RAM
916title=<span weight='heavy' fgcolor='#3D9970'> </span>
917borders_color=#3D9970
918
919#[cpu]
920#preset=CPU
921#title=<span weight='heavy' fgcolor='#2ECC40'> </span>
922#borders_color=#2ECC40
923
924#[hdd]
925#preset=HDD
926#title=<span weight='heavy' fgcolor='#01FF70'> </span>
927#borders_color=#01FF70
928
929[volume]
930command=volume-info
931title=<span weight='heavy' fgcolor='#7FDBFF'></span>
932borders_color=#7FDBFF
933
934[battery]
935preset=BAT
936command=battery-percentage-time
937title=<span weight='heavy' fgcolor='#39CCCC'> </span>
938borders_color=#39CCCC
939
940[wifi]
941preset=WIFI
942title=<span weight='heavy' fgcolor='#01FF70'> </span>
943borders_color=#01FF70
944
945[date]
946preset=DATE
947command=date '+%-I:%M, %a %b %d '
948title=<span weight='heavy' fgcolor='#FFDC00'> </span>
949borders_color=#FFDC00
950separator_width=0
951#+end_src
952
953** i3status
954:PROPERTIES:
955:header-args+: :tangle ~/.config/i3status/config
956:END:
957
958#+begin_src conf :comments none
959# i3status configuration file.
960# see "man i3status" for documentation.
961
962# It is important that this file is edited as UTF-8.
963# The following line should contain a sharp s:
964# ß
965# If the above line is not correctly displayed, fix your editor first!
966
967general {
968 colors = true
969 interval = 5
970 output_format = "i3bar"
971}
972
973# order += "ipv6"
974order += "disk /"
975order += "disk /data"
976order += "wireless _first_"
977order += "ethernet _first_"
978order += "battery 0"
979order += "volume master"
980order += "load"
981order += "tztime local"
982
983wireless _first_ {
984 format_up = "W:%quality %essid %ip"
985 format_down = "W: down"
986}
987
988ethernet _first_ {
989 # if you use %speed, i3status requires root privileges
990 format_up = "E: %ip (%speed)"
991 format_down = "E: down"
992}
993
994battery 0 {
995 format = "%status %percentage %remaining (%consumption)"
996 path = "/sys/class/power_supply/BAT%d/uevent"
997 low_threshold = "10"
998 threshold_type = "percentage"
999 last_full_capacity = true
1000 integer_battery_capacity = true
1001 hide_seconds = true
1002}
1003
1004tztime local {
1005 format = "%-I:%M%P %a %b %d"
1006}
1007
1008volume master {
1009 format = "♪ %volume"
1010 format_muted = "🔇 %volume"
1011 device = "pulse"
1012}
1013
1014load {
1015 format = "%1min"
1016}
1017
1018disk "/" {
1019 format = "/ %avail"
1020}
1021
1022disk "/data" {
1023 format = "/data %avail"
1024}
1025#+end_src
1026
1027** isync
1028
1029*** mbsyncrc
1030:PROPERTIES:
1031:header-args+: :tangle ~/.mbsyncrc
1032:END:
1033
1034#+begin_src conf
1035# Global defaults
1036CopyArrivalDate yes
1037Create Both
1038Expunge Both
1039
1040######
1041IMAPAccount amin
1042Host mail.aminb.org
1043User amin@aminb.org
1044PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
1045SSLType IMAPS
1046
1047IMAPStore amin-remote
1048Account amin
1049
1050IMAPAccount amin-dovecot
1051Host 127.0.0.1
1052Port 143
1053User amin@aminb.org
1054PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin-dovecot.gpg"
1055SSLType None
1056
1057IMAPStore amin-local
1058Account amin-dovecot
1059
1060Channel amin
1061Master :amin-remote:
1062Slave :amin-local:
1063Patterns *
1064
1065######
1066IMAPAccount uwaterloo
1067Host connect.uwaterloo.ca
1068User abandali
1069PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
1070SSLType IMAPS
1071
1072IMAPStore uwaterloo-remote
1073Account uwaterloo
1074
1075IMAPAccount uwaterloo-dovecot
1076Host 127.0.0.1
1077Port 143
1078User abandali@uwaterloo.ca
1079PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo-dovecot.gpg"
1080SSLType None
1081
1082IMAPStore uwaterloo-local
1083Account uwaterloo-dovecot
1084
1085Channel uwaterloo
1086Master :uwaterloo-remote:
1087Slave :uwaterloo-local:
1088Patterns *
1089#+end_src
1090
1091*** mbsync.service
1092:PROPERTIES:
1093:header-args+: :tangle ~/.config/systemd/user/mbsync.service
1094:END:
1095
1096#+begin_src conf :tangle no
1097[Unit]
1098Description=mbsync service
1099
1100[Service]
1101Type=oneshot
1102ExecStart=/usr/bin/mbsync -Va
1103StandardOutput=syslog
1104StandardError=syslog
1105#+end_src
1106
1107*** mbsync.timer
1108:PROPERTIES:
1109:header-args+: :tangle ~/.config/systemd/user/mbsync.timer
1110:END:
1111
1112#+begin_src conf :tangle no
1113[Unit]
1114Description=mbsync timer
1115
1116[Timer]
1117OnCalendar=*:0/15
1118Persistent=true
1119Unit=mbsync.service
1120
1121[Install]
1122WantedBy=timers.target
1123#+end_src
1124
1125** Latexmk
1126:PROPERTIES:
1127:header-args+: :tangle ~/.latexmkrc
1128:END:
1129
1130#+begin_src conf
1131$pdf_previewer = "start zathura %O %S";
1132$clean_ext = "aux out";
1133
1134# $pdf_update_method = 4;
1135# $pdf_update_command = "zathura %O %S";
1136
1137# Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
1138# by Ctrl+click in the PDF.
1139# Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
1140# editor.
1141# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
1142#+end_src
1143
1144** libinput
1145
1146Improve XPS 15 9560's touchpad experience.
1147
1148# begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
1149#+begin_src conf :tangle no
1150Section "InputClass"
1151 Identifier "libinput touchpad catchall"
1152 Driver "libinput"
1153 MatchIsTouchpad "on"
1154 Option "ClickMethod" "clickfinger"
1155 Option "NaturalScrolling" "true"
1156 Option "Tapping" "on"
1157 Option "TappingButtonMap" "lrm"
1158EndSection
1159#+end_src
1160
1161** mpd
1162:PROPERTIES:
1163:header-args+: :tangle ~/.config/mpd/mpd.conf
1164:END:
1165
1166#+begin_src conf
1167# An example configuration file for MPD.
1168# Read the user manual for documentation: http://www.musicpd.org/doc/user/
1169
1170
1171# Files and directories #######################################################
1172#
1173# This setting controls the top directory which MPD will search to discover the
1174# available audio files and add them to the daemon's online database. This
1175# setting defaults to the XDG directory, otherwise the music directory will be
1176# be disabled and audio files will only be accepted over ipc socket (using
1177# file:// protocol) or streaming files over an accepted protocol.
1178#
1179music_directory "~/usr/music"
1180#
1181# This setting sets the MPD internal playlist directory. The purpose of this
1182# directory is storage for playlists created by MPD. The server will use
1183# playlist files not created by the server but only if they are in the MPD
1184# format. This setting defaults to playlist saving being disabled.
1185#
1186playlist_directory "~/.mpd/playlists"
1187#
1188# This setting sets the location of the MPD database. This file is used to
1189# load the database at server start up and store the database while the
1190# server is not up. This setting defaults to disabled which will allow
1191# MPD to accept files over ipc socket (using file:// protocol) or streaming
1192# files over an accepted protocol.
1193#
1194db_file "~/.mpd/database"
1195#
1196# These settings are the locations for the daemon log files for the daemon.
1197# These logs are great for troubleshooting, depending on your log_level
1198# settings.
1199#
1200# The special value "syslog" makes MPD use the local syslog daemon. This
1201# setting defaults to logging to syslog, otherwise logging is disabled.
1202#
1203log_file "~/.mpd/log"
1204#
1205# This setting sets the location of the file which stores the process ID
1206# for use of mpd --kill and some init scripts. This setting is disabled by
1207# default and the pid file will not be stored.
1208#
1209pid_file "~/.mpd/pid"
1210#
1211# This setting sets the location of the file which contains information about
1212# most variables to get MPD back into the same general shape it was in before
1213# it was brought down. This setting is disabled by default and the server
1214# state will be reset on server start up.
1215#
1216state_file "~/.mpd/state"
1217#
1218# The location of the sticker database. This is a database which
1219# manages dynamic information attached to songs.
1220#
1221sticker_file "~/.mpd/sticker.sql"
1222#
1223###############################################################################
1224
1225
1226# General music daemon options ################################################
1227#
1228# This setting specifies the user that MPD will run as. MPD should never run as
1229# root and you may use this setting to make MPD change its user ID after
1230# initialization. This setting is disabled by default and MPD is run as the
1231# current user.
1232#
1233#user "nobody"
1234#
1235# This setting specifies the group that MPD will run as. If not specified
1236# primary group of user specified with "user" setting will be used (if set).
1237# This is useful if MPD needs to be a member of group such as "audio" to
1238# have permission to use sound card.
1239#
1240#group "nogroup"
1241#
1242# This setting sets the address for the daemon to listen on. Careful attention
1243# should be paid if this is assigned to anything other then the default, any.
1244# This setting can deny access to control of the daemon. Not effective if
1245# systemd socket activiation is in use.
1246#
1247# For network
1248#bind_to_address "any"
1249#
1250# And for Unix Socket
1251#bind_to_address "~/.mpd/socket"
1252#
1253# This setting is the TCP port that is desired for the daemon to get assigned
1254# to.
1255#
1256#port "6600"
1257#
1258# This setting controls the type of information which is logged. Available
1259# setting arguments are "default", "secure" or "verbose". The "verbose" setting
1260# argument is recommended for troubleshooting, though can quickly stretch
1261# available resources on limited hardware storage.
1262#
1263#log_level "default"
1264#
1265# If you have a problem with your MP3s ending abruptly it is recommended that
1266# you set this argument to "no" to attempt to fix the problem. If this solves
1267# the problem, it is highly recommended to fix the MP3 files with vbrfix
1268# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
1269# point gapless MP3 playback can be enabled.
1270#
1271#gapless_mp3_playback "yes"
1272#
1273# Setting "restore_paused" to "yes" puts MPD into pause mode instead
1274# of starting playback after startup.
1275#
1276#restore_paused "no"
1277#
1278# This setting enables MPD to create playlists in a format usable by other
1279# music players.
1280#
1281#save_absolute_paths_in_playlists "no"
1282#
1283# This setting defines a list of tag types that will be extracted during the
1284# audio file discovery process. The complete list of possible values can be
1285# found in the user manual.
1286#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
1287#
1288# This setting enables automatic update of MPD's database when files in
1289# music_directory are changed.
1290#
1291#auto_update "yes"
1292#
1293# Limit the depth of the directories being watched, 0 means only watch
1294# the music directory itself. There is no limit by default.
1295#
1296#auto_update_depth "3"
1297#
1298###############################################################################
1299
1300
1301# Symbolic link behavior ######################################################
1302#
1303# If this setting is set to "yes", MPD will discover audio files by following
1304# symbolic links outside of the configured music_directory.
1305#
1306#follow_outside_symlinks "yes"
1307#
1308# If this setting is set to "yes", MPD will discover audio files by following
1309# symbolic links inside of the configured music_directory.
1310#
1311#follow_inside_symlinks "yes"
1312#
1313###############################################################################
1314
1315
1316# Zeroconf / Avahi Service Discovery ##########################################
1317#
1318# If this setting is set to "yes", service information will be published with
1319# Zeroconf / Avahi.
1320#
1321#zeroconf_enabled "yes"
1322#
1323# The argument to this setting will be the Zeroconf / Avahi unique name for
1324# this MPD server on the network.
1325#
1326#zeroconf_name "Music Player"
1327#
1328###############################################################################
1329
1330
1331# Permissions #################################################################
1332#
1333# If this setting is set, MPD will require password authorization. The password
1334# setting can be specified multiple times for different password profiles.
1335#
1336#password "password@read,add,control,admin"
1337#
1338# This setting specifies the permissions a user has who has not yet logged in.
1339#
1340#default_permissions "read,add,control,admin"
1341#
1342###############################################################################
1343
1344
1345# Database #######################################################################
1346#
1347
1348#database {
1349# plugin "proxy"
1350# host "other.mpd.host"
1351# port "6600"
1352#}
1353
1354# Input #######################################################################
1355#
1356
1357input {
1358 plugin "curl"
1359# proxy "proxy.isp.com:8080"
1360# proxy_user "user"
1361# proxy_password "password"
1362}
1363
1364#
1365###############################################################################
1366
1367# Audio Output ################################################################
1368#
1369
1370audio_output {
1371 type "pulse"
1372 name "pulse audio"
1373}
1374
1375audio_output {
1376 type "fifo"
1377 name "my_fifo"
1378 path "/tmp/mpd.fifo"
1379 format "44100:16:2"
1380}
1381
1382# MPD supports various audio output types, as well as playing through multiple
1383# audio outputs at the same time, through multiple audio_output settings
1384# blocks. Setting this block is optional, though the server will only attempt
1385# autodetection for one sound card.
1386#
1387# An example of an ALSA output:
1388#
1389#audio_output {
1390# type "alsa"
1391# name "My ALSA Device"
1392## device "hw:0,0" # optional
1393## mixer_type "hardware" # optional
1394## mixer_device "default" # optional
1395## mixer_control "PCM" # optional
1396## mixer_index "0" # optional
1397#}
1398#
1399# An example of an OSS output:
1400#
1401#audio_output {
1402# type "oss"
1403# name "My OSS Device"
1404## device "/dev/dsp" # optional
1405## mixer_type "hardware" # optional
1406## mixer_device "/dev/mixer" # optional
1407## mixer_control "PCM" # optional
1408#}
1409#
1410# An example of a shout output (for streaming to Icecast):
1411#
1412#audio_output {
1413# type "shout"
1414# encoder "vorbis" # optional
1415# name "My Shout Stream"
1416# host "localhost"
1417# port "8000"
1418# mount "/mpd.ogg"
1419# password "hackme"
1420# quality "5.0"
1421# bitrate "128"
1422# format "44100:16:1"
1423## protocol "icecast2" # optional
1424## user "source" # optional
1425## description "My Stream Description" # optional
1426## url "http://example.com" # optional
1427## genre "jazz" # optional
1428## public "no" # optional
1429## timeout "2" # optional
1430## mixer_type "software" # optional
1431#}
1432#
1433# An example of a recorder output:
1434#
1435#audio_output {
1436# type "recorder"
1437# name "My recorder"
1438# encoder "vorbis" # optional, vorbis or lame
1439# path "/var/lib/mpd/recorder/mpd.ogg"
1440## quality "5.0" # do not define if bitrate is defined
1441# bitrate "128" # do not define if quality is defined
1442# format "44100:16:1"
1443#}
1444#
1445# An example of a httpd output (built-in HTTP streaming server):
1446#
1447#audio_output {
1448# type "httpd"
1449# name "My HTTP Stream"
1450# encoder "vorbis" # optional, vorbis or lame
1451# port "8000"
1452# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
1453## quality "5.0" # do not define if bitrate is defined
1454# bitrate "128" # do not define if quality is defined
1455# format "44100:16:1"
1456# max_clients "0" # optional 0=no limit
1457#}
1458#
1459# An example of a pulseaudio output (streaming to a remote pulseaudio server)
1460#
1461#audio_output {
1462# type "pulse"
1463# name "My Pulse Output"
1464## server "remote_server" # optional
1465## sink "remote_server_sink" # optional
1466#}
1467#
1468# An example of a winmm output (Windows multimedia API).
1469#
1470#audio_output {
1471# type "winmm"
1472# name "My WinMM output"
1473## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1474# or
1475## device "0" # optional
1476## mixer_type "hardware" # optional
1477#}
1478#
1479# An example of an openal output.
1480#
1481#audio_output {
1482# type "openal"
1483# name "My OpenAL output"
1484## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1485#}
1486#
1487# An example of an sndio output.
1488#
1489#audio_output {
1490# type "sndio"
1491# name "sndio output"
1492# mixer_type "software"
1493#}
1494#
1495# An example of an OS X output:
1496#
1497#audio_output {
1498# type "osx"
1499# name "My OS X Device"
1500## device "Built-in Output" # optional
1501## channel_map "-1,-1,0,1" # optional
1502#}
1503#
1504## Example "pipe" output:
1505#
1506#audio_output {
1507# type "pipe"
1508# name "my pipe"
1509# command "aplay -f cd 2>/dev/null"
1510## Or if you're want to use AudioCompress
1511# command "AudioCompress -m | aplay -f cd 2>/dev/null"
1512## Or to send raw PCM stream through PCM:
1513# command "nc example.org 8765"
1514# format "44100:16:2"
1515#}
1516#
1517## An example of a null output (for no audio output):
1518#
1519#audio_output {
1520# type "null"
1521# name "My Null Output"
1522# mixer_type "none" # optional
1523#}
1524#
1525###############################################################################
1526
1527
1528# Normalization automatic volume adjustments ##################################
1529#
1530# This setting specifies the type of ReplayGain to use. This setting can have
1531# the argument "off", "album", "track" or "auto". "auto" is a special mode that
1532# chooses between "track" and "album" depending on the current state of
1533# random playback. If random playback is enabled then "track" mode is used.
1534# See <http://www.replaygain.org> for more details about ReplayGain.
1535# This setting is off by default.
1536#
1537#replaygain "album"
1538#
1539# This setting sets the pre-amp used for files that have ReplayGain tags. By
1540# default this setting is disabled.
1541#
1542#replaygain_preamp "0"
1543#
1544# This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1545# By default this setting is disabled.
1546#
1547#replaygain_missing_preamp "0"
1548#
1549# This setting enables or disables ReplayGain limiting.
1550# MPD calculates actual amplification based on the ReplayGain tags
1551# and replaygain_preamp / replaygain_missing_preamp setting.
1552# If replaygain_limit is enabled MPD will never amplify audio signal
1553# above its original level. If replaygain_limit is disabled such amplification
1554# might occur. By default this setting is enabled.
1555#
1556#replaygain_limit "yes"
1557#
1558# This setting enables on-the-fly normalization volume adjustment. This will
1559# result in the volume of all playing audio to be adjusted so the output has
1560# equal "loudness". This setting is disabled by default.
1561#
1562#volume_normalization "no"
1563#
1564###############################################################################
1565
1566# Character Encoding ##########################################################
1567#
1568# If file or directory names do not display correctly for your locale then you
1569# may need to modify this setting.
1570#
1571#filesystem_charset "UTF-8"
1572#
1573###############################################################################
1574#+end_src
1575
1576** msmtp
1577:PROPERTIES:
1578:header-args+: :tangle ~/.msmtprc
1579:END:
1580
1581#+begin_src conf
1582# Set default values for all following accounts.
1583defaults
1584port 587
1585tls on
1586auth on
1587#tls_trust_file /etc/ssl/certs/ca-certificates.crt
1588logfile ~/.msmtp.log
1589
1590# aminb
1591account aminb
1592host mail.aminb.org
1593# use `msmtp -a aminb --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1594tls_fingerprint C7:A4:2E:A3:11:FA:80:45:C4:29:D6:62:4D:73:DB:34:43:67:8F:16:F1:2E:54:43:06:1B:41:B6:A9:09:E0:37
1595tls_starttls on
1596from amin@aminb.org
1597user amin@aminb.org
1598passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
1599
1600# gnu
1601account gnu
1602host fencepost.gnu.org
1603# use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1604tls_fingerprint 93:59:52:1D:A6:95:13:31:7C:81:ED:DB:A5:BA:B5:2B:C8:BC:38:3E:71:A5:DF:8C:80:46:C1:E0:5D:2D:F4:E3
1605tls_starttls on
1606from bandali@gnu.org
1607user bandali
1608passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
1609
1610# gnu (old)
1611account gnu-aminb : gnu
1612from aminb@gnu.org
1613account gnu-amin : gnu
1614from amin@gnu.org
1615account gnu-mab : gnu
1616from mab@gnu.org
1617
1618# uwaterloo
1619account uwaterloo
1620host connect.uwaterloo.ca
1621tls_starttls on
1622from abandali@uwaterloo.ca
1623user abandali
1624passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
1625tls_trust_file /etc/ssl/certs/ca-certificates.crt
1626
1627# Set a default account
1628account default : aminb
1629#+end_src
1630
1631** ncmpcpp
1632
1633*** config
1634:PROPERTIES:
1635:header-args+: :tangle ~/.ncmpcpp/config
1636:END:
1637
1638#+begin_src conf :tangle no
1639##############################################################
1640## This is the example configuration file. Copy it to ##
1641## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
1642## and set up your preferences. ##
1643##############################################################
1644#
1645##### directories ######
1646##
1647## Directory for storing ncmpcpp related files.
1648## Changing it is useful if you want to store
1649## everything somewhere else and provide command
1650## line setting for alternative location to config
1651## file which defines that while launching ncmpcpp.
1652##
1653#
1654ncmpcpp_directory = ~/.ncmpcpp
1655#
1656##
1657## Directory for storing downloaded lyrics. It
1658## defaults to ~/.lyrics since other MPD clients
1659## (eg. ncmpc) also use that location.
1660##
1661#
1662#lyrics_directory = ~/.lyrics
1663#
1664##### connection settings #####
1665#
1666#mpd_host = localhost
1667#
1668#mpd_port = 6600
1669#
1670#mpd_connection_timeout = 5
1671#
1672## Needed for tag editor and file operations to work.
1673##
1674mpd_music_dir = ~/usr/music
1675#
1676#mpd_crossfade_time = 5
1677#
1678##### music visualizer #####
1679##
1680## Note: In order to make music visualizer work you'll
1681## need to use mpd fifo output, whose format parameter
1682## has to be set to 44100:16:1 for mono visualization
1683## or 44100:16:2 for stereo visualization. Example
1684## configuration (it has to be put into mpd.conf):
1685##
1686## audio_output {
1687## type "fifo"
1688## name "Visualizer feed"
1689## path "/tmp/mpd.fifo"
1690## format "44100:16:2"
1691## }
1692##
1693#
1694visualizer_fifo_path = /tmp/mpd.fifo
1695#
1696##
1697## Note: Below parameter is needed for ncmpcpp
1698## to determine which output provides data for
1699## visualizer and thus allow syncing between
1700## visualization and sound as currently there
1701## are some problems with it.
1702##
1703#
1704visualizer_output_name = my fifo
1705#
1706##
1707## If you set format to 44100:16:2, make it 'yes'.
1708##
1709visualizer_in_stereo = yes
1710#
1711##
1712## Multiply received samples by given value. Very
1713## useful for proper visualization of quiet music.
1714##
1715#visualizer_sample_multiplier = 1
1716#
1717##
1718## Note: Below parameter defines how often ncmpcpp
1719## has to "synchronize" visualizer and audio outputs.
1720## 30 seconds is optimal value, but if you experience
1721## synchronization problems, set it to lower value.
1722## Keep in mind that sane values start with >=10.
1723##
1724#
1725visualizer_sync_interval = 30
1726#
1727##
1728## Note: To enable spectrum frequency visualization
1729## you need to compile ncmpcpp with fftw3 support.
1730##
1731#
1732## Available values: spectrum, wave, wave_filled, ellipse.
1733##
1734visualizer_type = spectrum
1735#
1736#visualizer_look = ●▮
1737visualizer_look = "●•"
1738#
1739#visualizer_color = blue, cyan, green, yellow, magenta, red
1740#
1741## Alternative subset of 256 colors for terminals that support it.
1742##
1743#visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
1744#
1745##### system encoding #####
1746##
1747## ncmpcpp should detect your charset encoding
1748## but if it failed to do so, you can specify
1749## charset encoding you are using here.
1750##
1751## Note: You can see whether your ncmpcpp build
1752## supports charset detection by checking output
1753## of `ncmpcpp --version`.
1754##
1755## Note: Since MPD uses UTF-8 by default, setting
1756## this option makes sense only if your encoding
1757## is different.
1758##
1759#
1760#system_encoding = ""
1761#
1762##### delays #####
1763#
1764## Time of inactivity (in seconds) after playlist
1765## highlighting will be disabled (0 = always on).
1766##
1767#playlist_disable_highlight_delay = 5
1768#
1769## Defines how long messages are supposed to be visible.
1770##
1771#message_delay_time = 5
1772#
1773##### song format #####
1774##
1775## For a song format you can use:
1776##
1777## %l - length
1778## %f - filename
1779## %D - directory
1780## %a - artist
1781## %A - album artist
1782## %t - title
1783## %b - album
1784## %y - date
1785## %n - track number (01/12 -> 01)
1786## %N - full track info (01/12 -> 01/12)
1787## %g - genre
1788## %c - composer
1789## %p - performer
1790## %d - disc
1791## %C - comment
1792## %P - priority
1793## $R - begin right alignment
1794##
1795## If you want to make sure that a part of the format is displayed
1796## only when certain tags are present, you can archieve it by
1797## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
1798## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
1799## It is also possible to define a list of alternatives by providing
1800## several groups and separating them with '|', e.g. '{%t}|{%f}'
1801## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
1802## present.
1803##
1804## Note: If you want to set limit on maximal length of a tag, just
1805## put the appropriate number between % and character that defines
1806## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
1807##
1808## In addition, formats support markers used for text attributes.
1809## They are followed by character '$'. After that you can put:
1810##
1811## - 0 - default window color (discards all other colors)
1812## - 1 - black
1813## - 2 - red
1814## - 3 - green
1815## - 4 - yellow
1816## - 5 - blue
1817## - 6 - magenta
1818## - 7 - cyan
1819## - 8 - white
1820## - 9 - end of current color
1821## - b - bold text
1822## - u - underline text
1823## - r - reverse colors
1824## - a - use alternative character set
1825##
1826## If you don't want to use a non-color attribute anymore, just put it
1827## again, but this time insert character '/' between '$' and attribute
1828## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
1829## or filename with reversed colors.
1830##
1831## If you want to use 256 colors and/or background colors in formats
1832## (the naming scheme is described below in section about color
1833## definitions), it can be done with the syntax $(COLOR), e.g. to set
1834## the artist tag to one of the non-standard colors and make it have
1835## yellow background, you need to write $(197_yellow)%a$(end). Note
1836## that for standard colors this is interchangable with attributes
1837## listed above.
1838##
1839## Note: colors can be nested.
1840##
1841#
1842#song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
1843#
1844#song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
1845#
1846#song_library_format = {%n - }{%t}|{%f}
1847#
1848#
1849#alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
1850#
1851#alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
1852#
1853#now_playing_prefix = $b
1854#
1855#now_playing_suffix = $/b
1856#
1857#browser_playlist_prefix = "$2playlist$9 "
1858#
1859#selected_item_prefix = $6
1860#
1861#selected_item_suffix = $9
1862#
1863#modified_item_prefix = $3> $9
1864#
1865##
1866## Note: attributes are not supported for the following variables.
1867##
1868#song_window_title_format = {%a - }{%t}|{%f}
1869##
1870## Note: Below variables are used for sorting songs in browser.
1871## The sort mode determines how songs are sorted, and can be used
1872## in combination with a sort format to specify a custom sorting format.
1873## Available values for browser_sort_mode are "name", "mtime", "format"
1874## and "noop".
1875##
1876#
1877#browser_sort_mode = name
1878#
1879#browser_sort_format = {%a - }{%t}|{%f} {(%l)}
1880#
1881##### columns settings #####
1882##
1883## syntax of song columns list format is "column column etc."
1884##
1885## - syntax for each column is:
1886##
1887## (width of the column)[color of the column]{displayed tag}
1888##
1889## Note: Width is by default in %, if you want a column to
1890## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
1891## will be the column that take 10% of screen (so the real width
1892## will depend on actual screen size), whereas (10f)[white]{a}
1893## will take 10 terminal cells, no matter how wide the screen is.
1894##
1895## - color is optional (if you want the default one,
1896## leave the field empty).
1897##
1898## Note: You can give a column additional attributes by putting appropriate
1899## character after displayed tag character. Available attributes are:
1900##
1901## - r - column will be right aligned
1902## - E - if tag is empty, empty tag marker won't be displayed
1903##
1904## You can also:
1905##
1906## - give a column custom name by putting it after attributes,
1907## separated with character ':', e.g. {lr:Length} gives you
1908## right aligned column of lengths named "Length".
1909##
1910## - define sequence of tags, that have to be displayed in case
1911## predecessor is empty in a way similar to the one in classic
1912## song format, i.e. using '|' character, e.g. {a|c|p:Owner}
1913## creates column named "Owner" that tries to display artist
1914## tag and then composer and performer if previous ones are
1915## not available.
1916##
1917#
1918#song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
1919#
1920##### various settings #####
1921#
1922##
1923## Note: Custom command that will be executed each
1924## time song changes. Useful for notifications etc.
1925##
1926#execute_on_song_change = ""
1927#
1928#playlist_show_mpd_host = no
1929#
1930#playlist_show_remaining_time = no
1931#
1932#playlist_shorten_total_times = no
1933#
1934#playlist_separate_albums = no
1935#
1936##
1937## Note: Possible display modes: classic, columns.
1938##
1939#playlist_display_mode = columns
1940#
1941#browser_display_mode = classic
1942#
1943#search_engine_display_mode = classic
1944#
1945#playlist_editor_display_mode = classic
1946#
1947#discard_colors_if_item_is_selected = yes
1948#
1949#incremental_seeking = yes
1950#
1951#seek_time = 1
1952#
1953#volume_change_step = 2
1954#
1955#autocenter_mode = no
1956#
1957#centered_cursor = no
1958#
1959##
1960## Note: You can specify third character which will
1961## be used to build 'empty' part of progressbar.
1962##
1963#progressbar_look = =>
1964progressbar_look = "─╼╶"
1965#progressbar_look = "─⊙╶"
1966#
1967#progressbar_boldness = yes
1968#
1969## Available values: database, playlist.
1970##
1971#default_place_to_search_in = database
1972#
1973## Available values: classic, alternative.
1974##
1975#user_interface = classic
1976#
1977#data_fetching_delay = yes
1978#
1979## Available values: artist, album_artist, date, genre, composer, performer.
1980##
1981#media_library_primary_tag = artist
1982#
1983## Available values: wrapped, normal.
1984##
1985#default_find_mode = wrapped
1986#
1987#default_tag_editor_pattern = %n - %t
1988#
1989#header_visibility = yes
1990#
1991#statusbar_visibility = yes
1992#
1993#titles_visibility = yes
1994#
1995#header_text_scrolling = yes
1996#
1997#cyclic_scrolling = no
1998#
1999#lines_scrolled = 2
2000#
2001#follow_now_playing_lyrics = no
2002#
2003#fetch_lyrics_for_current_song_in_background = no
2004#
2005#store_lyrics_in_song_dir = no
2006#
2007#generate_win32_compatible_filenames = yes
2008#
2009#allow_for_physical_item_deletion = no
2010#
2011##
2012## Note: If you set this variable, ncmpcpp will try to
2013## get info from last.fm in language you set and if it
2014## fails, it will fall back to english. Otherwise it will
2015## use english the first time.
2016##
2017## Note: Language has to be expressed as an ISO 639 alpha-2 code.
2018##
2019#lastfm_preferred_language = en
2020#
2021#show_hidden_files_in_local_browser = no
2022#
2023##
2024## How shall screen switcher work?
2025##
2026## - "previous" - switch between the current and previous screen.
2027## - "screen1,...,screenN" - switch between given sequence of screens.
2028##
2029## Screens available for use: help, playlist, browser, search_engine,
2030## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
2031##
2032#screen_switcher_mode = playlist, browser
2033#
2034##
2035## Note: You can define startup screen
2036## by choosing screen from the list above.
2037##
2038#startup_screen = playlist
2039#
2040##
2041## Note: You can define startup slave screen
2042## by choosing screen from the list above or
2043## an empty value for no slave screen.
2044##
2045#startup_slave_screen = ""
2046#
2047#startup_slave_screen_focus = no
2048#
2049##
2050## Default width of locked screen (in %).
2051## Acceptable values are from 20 to 80.
2052##
2053#
2054#locked_screen_width_part = 50
2055#
2056#ask_for_locked_screen_width_part = yes
2057#
2058#jump_to_now_playing_song_at_start = yes
2059#
2060#ask_before_clearing_playlists = yes
2061#
2062#clock_display_seconds = no
2063#
2064#display_volume_level = yes
2065#
2066#display_bitrate = no
2067#
2068#display_remaining_time = no
2069#
2070## Available values: none, basic, extended, perl.
2071##
2072#regular_expressions = perl
2073#
2074##
2075## Note: If below is enabled, ncmpcpp will ignore leading
2076## "The" word while sorting items in browser, tags in
2077## media library, etc.
2078##
2079#ignore_leading_the = no
2080#
2081#block_search_constraints_change_if_items_found = yes
2082#
2083#mouse_support = yes
2084#
2085#mouse_list_scroll_whole_page = yes
2086#
2087#empty_tag_marker = <empty>
2088#
2089#tags_separator = " | "
2090#
2091#tag_editor_extended_numeration = no
2092#
2093#media_library_sort_by_mtime = no
2094#
2095#enable_window_title = yes
2096#
2097##
2098## Note: You can choose default search mode for search
2099## engine. Available modes are:
2100##
2101## - 1 - use mpd built-in searching (no regexes, pattern matching)
2102## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
2103## but if your mpd is on a remote machine, downloading big database
2104## to process it can take a while
2105## - 3 - match only exact values (this mode uses mpd function for searching
2106## in database and local one for searching in current playlist)
2107##
2108#
2109#search_engine_default_search_mode = 1
2110#
2111#external_editor = nano
2112#
2113## Note: set to yes if external editor is a console application.
2114##
2115#use_console_editor = yes
2116#
2117##### colors definitions #####
2118##
2119## It is possible to set a background color by setting a color
2120## value "<foreground>_<background>", e.g. red_black will set
2121## foregound color to red and background color to black.
2122##
2123## In addition, for terminals that support 256 colors it
2124## is possible to set one of them by using a number in range
2125## [1, 256] instead of color name, e.g. numerical value
2126## corresponding to red_black is 2_1. To find out if the
2127## terminal supports 256 colors, run ncmpcpp and check out
2128## the bottom of the help screen for list of available colors
2129## and their numerical values.
2130##
2131## Note: due to technical limitations of ncurses, if 256 colors
2132## are used, it is possible to either use only the colors with
2133## default background color, or all pairs from 1_1 up to 254_127,
2134## depending on the ncurses version used.
2135##
2136#
2137#colors_enabled = yes
2138#
2139#empty_tag_color = cyan
2140#
2141#header_window_color = default
2142#
2143#volume_color = default
2144#
2145#state_line_color = default
2146#
2147#state_flags_color = default
2148#
2149#main_window_color = yellow
2150#
2151#color1 = white
2152#
2153#color2 = green
2154#
2155#main_window_highlight_color = yellow
2156#
2157#progressbar_color = black
2158#
2159#progressbar_elapsed_color = green
2160#
2161#statusbar_color = default
2162#
2163#alternative_ui_separator_color = black
2164#
2165#active_column_color = red
2166#
2167#window_border_color = green
2168#
2169#active_window_border = red
2170#
2171#+end_src
2172
2173*** bindings
2174:PROPERTIES:
2175:header-args+: :tangle ~/.ncmpcpp/bindings
2176:END:
2177
2178#+begin_src conf :tangle no
2179def_key "j"
2180 scroll_down
2181def_key "k"
2182 scroll_up
2183
2184def_key "ctrl-u"
2185 page_up
2186def_key "ctrl-d"
2187 page_down
2188
2189def_key "h"
2190 previous_column
2191def_key "l"
2192 next_column
2193
2194def_key "."
2195 show_lyrics
2196
2197def_key "n"
2198 next_found_item
2199def_key "N"
2200 previous_found_item
2201
2202def_key "J"
2203 move_sort_order_down
2204def_key "K"
2205 move_sort_order_up
2206#+end_src
2207
2208** notmuch
2209
2210*** notmuch-config
2211:PROPERTIES:
2212:header-args+: :tangle ~/.notmuch-config
2213:END:
2214
2215#+begin_src conf
2216# .notmuch-config - Configuration file for the notmuch mail system
2217#
2218# For more information about notmuch, see https://notmuchmail.org
2219
2220# Database configuration
2221#
2222# The only value supported here is 'path' which should be the top-level
2223# directory where your mail currently exists and to where mail will be
2224# delivered in the future. Files should be individual email messages.
2225# Notmuch will store its database within a sub-directory of the path
2226# configured here named ".notmuch".
2227#
2228[database]
2229path=/home/amin/oldmail
2230
2231# User configuration
2232#
2233# Here is where you can let notmuch know how you would like to be
2234# addressed. Valid settings are
2235#
2236# name Your full name.
2237# primary_email Your primary email address.
2238# other_email A list (separated by ';') of other email addresses
2239# at which you receive email.
2240#
2241# Notmuch will use the various email addresses configured here when
2242# formatting replies. It will avoid including your own addresses in the
2243# recipient list of replies, and will set the From address based on the
2244# address to which the original email was addressed.
2245#
2246[user]
2247name=Amin Bandali
2248primary_email=amin@aminb.org
2249other_email=bandali@gnu.org;abandali@uwaterloo.ca;
2250
2251# Configuration for "notmuch new"
2252#
2253# The following options are supported here:
2254#
2255# tags A list (separated by ';') of the tags that will be
2256# added to all messages incorporated by "notmuch new".
2257#
2258# ignore A list (separated by ';') of file and directory names
2259# that will not be searched for messages by "notmuch new".
2260#
2261# NOTE: *Every* file/directory that goes by one of those
2262# names will be ignored, independent of its depth/location
2263# in the mail store.
2264#
2265[new]
2266tags=new;
2267#tags=unread;inbox;
2268ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
2269
2270# Search configuration
2271#
2272# The following option is supported here:
2273#
2274# exclude_tags
2275# A ;-separated list of tags that will be excluded from
2276# search results by default. Using an excluded tag in a
2277# query will override that exclusion.
2278#
2279[search]
2280exclude_tags=deleted;spam;
2281
2282# Maildir compatibility configuration
2283#
2284# The following option is supported here:
2285#
2286# synchronize_flags Valid values are true and false.
2287#
2288# If true, then the following maildir flags (in message filenames)
2289# will be synchronized with the corresponding notmuch tags:
2290#
2291# Flag Tag
2292# ---- -------
2293# D draft
2294# F flagged
2295# P passed
2296# R replied
2297# S unread (added when 'S' flag is not present)
2298#
2299# The "notmuch new" command will notice flag changes in filenames
2300# and update tags, while the "notmuch tag" and "notmuch restore"
2301# commands will notice tag changes and update flags in filenames
2302#
2303[maildir]
2304synchronize_flags=true
2305
2306# Cryptography related configuration
2307#
2308# The following option is supported here:
2309#
2310# gpg_path
2311# binary name or full path to invoke gpg.
2312#
2313[crypto]
2314gpg_path=gpg
2315#+end_src
2316
2317*** pre-new hook
2318:PROPERTIES:
2319:header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
2320:END:
2321
2322#+begin_src sh
2323touch /tmp/gnusieve.log
2324sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
2325 -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
2326#+end_src
2327
2328*** post-new hook
2329:PROPERTIES:
2330:header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
2331:END:
2332
2333#+begin_src sh
2334# apply sent tag to messages sent by me
2335notmuch tag -new +sent -- from:amin@aminb.org or from:bandali@gnu.org or from:aminb@gnu.org or from:amin@gnu.org or from:mab@gnu.org or from:abandali@uwaterloo.ca
2336
2337# initial tagging
2338notmuch tag -latest -- tag:latest
2339notmuch tag +inbox +unread +latest -new -- tag:new
2340
2341
2342# apply tags to lists
2343
2344# <aminb>
2345notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
2346notmuch tag -inbox +lists/haskell-weekly -- folder:amin/lists/haskell-weekly
2347
2348notmuch tag -inbox +pay -- folder:amin/pay
2349notmuch tag -inbox +banking -- folder:amin/banking
2350notmuch tag -inbox +work -- folder:amin/work
2351# </aminb>
2352
2353# <uw>
2354notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
2355notmuch tag -inbox +uw/cs846 -- folder:uwaterloo/lists/cs846
2356notmuch tag -inbox +uw/ece750 -- folder:uwaterloo/lists/ece750
2357notmuch tag -inbox +uw/se212 -- folder:uwaterloo/lists/se212
2358notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
2359
2360notmuch tag -inbox +lists/alloytools -- folder:uwaterloo/lists/alloytools
2361notmuch tag -inbox +lists/clvsingle -- folder:uwaterloo/lists/Clvsingle
2362notmuch tag -inbox +lists/gsa -- folder:uwaterloo/lists/GSA
2363notmuch tag -inbox +lists/math-grad -- folder:uwaterloo/lists/Math-grad
2364notmuch tag -inbox +lists/scs-grads -- folder:uwaterloo/lists/scs-grads
2365notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
2366# </uw>
2367
2368# <gnu>
2369notmuch tag -inbox +l/emacs-devel -- folder:gnu/l/emacs-devel
2370notmuch tag -inbox +l/emacs-orgmode -- folder:gnu/l/emacs-orgmode
2371notmuch tag -inbox +l/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
2372notmuch tag -inbox +l/fencepost-users -- folder:gnu/l/fencepost-users
2373notmuch tag -inbox +l/guix-devel -- folder:gnu/l/guix-devel
2374notmuch tag -inbox +l/guile-devel -- folder:gnu/l/guile-devel
2375notmuch tag -inbox +l/help-gnu-emacs -- folder:gnu/l/help-gnu-emacs
2376notmuch tag -inbox +l/info-gnu-emacs -- folder:gnu/l/info-gnu-emacs
2377notmuch tag -inbox +l/www-commits -- folder:gnu/l/www-commits
2378notmuch tag -inbox +l/www-discuss -- folder:gnu/l/www-discuss
2379notmuch tag -inbox +webmasters -- folder:gnu/webmasters
2380
2381notmuch tag -inbox +l/deepspec -- folder:gnu/l/deepspec
2382notmuch tag -inbox +l/haskell-cafe -- folder:gnu/l/haskell-cafe
2383notmuch tag -inbox +l/haskell-art -- folder:gnu/l/haskell-art
2384notmuch tag -inbox +l/notmuch -- folder:gnu/l/notmuch
2385
2386notmuch tag -inbox +l/~aminb/test-priv -- folder:gnu/l/~aminb/test-priv
2387notmuch tag -inbox +l/~sircmpwn/sr.ht-admins -- folder:gnu/l/~sircmpwn/sr.ht-admins
2388notmuch tag -inbox +l/~sircmpwn/sr.ht-announce -- folder:gnu/l/~sircmpwn/sr.ht-announce
2389notmuch tag -inbox +l/~sircmpwn/sr.ht-dev -- folder:gnu/l/~sircmpwn/sr.ht-dev
2390notmuch tag -inbox +l/~sircmpwn/sr.ht-discuss -- folder:gnu/l/~sircmpwn/sr.ht-discuss
2391# </gnu>
2392
2393notmuch tag -inbox -unread +archive/notmuch -- path:archive/notmuch/**
2394notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**
2395#+end_src
2396
2397*** notmuch.service
2398:PROPERTIES:
2399:header-args+: :tangle ~/.config/systemd/user/notmuch.service
2400:END:
2401
2402#+begin_src conf :tangle no
2403[Unit]
2404Description=notmuch service
2405
2406[Service]
2407Type=oneshot
2408ExecStart=/usr/bin/notmuch new
2409StandardOutput=syslog
2410StandardError=syslog
2411#+end_src
2412
2413*** notmuch.timer
2414:PROPERTIES:
2415:header-args+: :tangle ~/.config/systemd/user/notmuch.timer
2416:END:
2417
2418#+begin_src conf :tangle no
2419[Unit]
2420Description=notmuch timer
2421
2422[Timer]
2423OnCalendar=*:0/5
2424Persistent=true
2425Unit=notmuch.service
2426
2427[Install]
2428WantedBy=timers.target
2429#+end_src
2430
2431** offlineimap
2432
2433*** offlineimaprc
2434:PROPERTIES:
2435:header-args+: :tangle ~/.offlineimaprc
2436:END:
2437
2438#+begin_src conf :tangle no
2439[general]
2440pythonfile = ~/.offlineimap.py
2441accounts = Gmail, aminb
2442maxsyncaccounts = 3
2443
2444[Account Gmail]
2445localrepository = GmailL
2446remoterepository = GmailR
2447
2448[Account aminb]
2449localrepository = aminbL
2450remoterepository = aminbR
2451
2452[Repository GmailL]
2453type = Maildir
2454localfolders = ~/Maildir/Gmail
2455
2456[Repository GmailR]
2457type = IMAP
2458remotehost = imap.gmail.com
2459remoteusereval = mailuser("gmail")
2460remotepasseval = mailpasswd("gmail")
2461sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2462ssl = yes
2463folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
2464maxconnections = 1
2465realdelete = no
2466
2467[Repository aminbL]
2468type = Maildir
2469localfolders = ~/Maildir/aminb
2470
2471[Repository aminbR]
2472type = IMAP
2473remotehost = mail.aminb.org
2474remoteusereval = mailuser("aminb")
2475remotepasseval = mailpasswd("aminb")
2476sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2477ssl = yes
2478folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
2479maxconnections = 1
2480realdelete = no
2481#+end_src
2482
2483*** offlineimap.py
2484:PROPERTIES:
2485:header-args+: :tangle ~/.offlineimap.py
2486:END:
2487
2488#+begin_src python :tangle no
2489import os
2490import subprocess
2491
2492def mailpasswd(acct):
2493 acct = os.path.basename(acct)
2494 path = "/home/amin/.passwd/%s.gpg" % acct
2495 args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
2496 try:
2497 return subprocess.check_output(args).strip()
2498 except subprocess.CalledProcessError:
2499 return ""
2500
2501def mailuser(acct):
2502 acct = os.path.basename(acct)
2503 path = "/home/amin/.passwd/%s" % acct
2504 args = ["cat", path]
2505 try:
2506 return subprocess.check_output(args).strip()
2507 except subprocess.CalledProcessError:
2508 return ""
2509
2510def prime_gpg_agent():
2511 ret = False
2512 i = 1
2513 while not ret:
2514 ret = (mailpasswd("prime") == "prime")
2515 if i > 2:
2516 from offlineimap.ui import getglobalui
2517 sys.stderr.write("Error reading in passwords. Terminating.\n")
2518 getglobalui().terminate()
2519 i += 1
2520 return ret
2521
2522prime_gpg_agent()
2523#+end_src
2524
2525** pigeonhole
2526*** amin.sieve
2527:PROPERTIES:
2528:header-args+: :tangle ~/mail/aminb.org/amin/sieve/amin.sieve :comments none
2529:END:
2530
2531#+begin_src conf
2532require ["regex", "variables", "fileinto", "envelope",
2533 "mailbox", "imap4flags", "include"];
2534
2535# webmasters
2536if anyof (
2537 address :is "from" ["webmasters@gnu.org", "webmasters-comment@gnu.org"]) {
2538 fileinto :create "gnu.webmasters";
2539 stop;
2540}
2541
2542include :personal "lists";
2543#+end_src
2544
2545*** lists.sieve
2546:PROPERTIES:
2547:header-args+: :tangle ~/mail/aminb.org/amin/sieve/lists.sieve :comments none
2548:END:
2549
2550#+begin_src conf
2551require ["regex", "variables", "fileinto", "envelope",
2552 "mailbox", "imap4flags", "include"];
2553
2554# mailing lists
2555if anyof (
2556 header :contains "list-id"
2557 [ "<emacs-devel.gnu.org>"
2558 , "<emacs-orgmode.gnu.org>"
2559 , "<emacsconf-discuss.gnu.org>"
2560 , "<fencepost-users.gnu.org>"
2561 , "<guix-devel.gnu.org>"
2562 , "<guile-devel.gnu.org>"
2563 , "<help-gnu-emacs.gnu.org>"
2564 , "<info-gnu-emacs.gnu.org>"
2565 , "<info-guix.gnu.org>"
2566 , "<www-commits.gnu.org>"
2567 , "<www-discuss.gnu.org>"
2568 , "<deepspec.lists.cs.princeton.edu>"
2569 , "<haskell-cafe.haskell.org>"
2570 , "<haskell-art.we.lurk.org>"
2571 , "<notmuch.notmuchmail.org>"
2572 ] ) {
2573 if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
2574 set :lower "listname" "${1}";
2575 fileinto :create "gnu.${listname}";
2576 stop;
2577 }
2578}
2579
2580# sr.ht lists, with dots ('.') omitted
2581if anyof (
2582 header :contains "list-id"
2583 [ "<~bandali/public-inbox@lists.sr.ht>"
2584 , "<~sircmpwn/sr.ht-admins@lists.sr.ht>"
2585 , "<~sircmpwn/sr.ht-announce@lists.sr.ht>"
2586 , "<~sircmpwn/sr.ht-dev@lists.sr.ht>"
2587 , "<~sircmpwn/sr.ht-discuss@lists.sr.ht>"
2588 ] ) {
2589 if header :regex "list-id" "(~[a-z_0-9-]+)/([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)@" {
2590 set :lower "username" "${1}";
2591 set :lower "listname" "${2}${3}${4}${5}${6}${7}";
2592 fileinto :create "gnu.${username}.${listname}";
2593 stop;
2594 }
2595}
2596#+end_src
2597
2598** polybar
2599
2600*** config
2601:PROPERTIES:
2602:header-args+: :tangle ~/.config/polybar/config
2603:END:
2604
2605#+begin_src conf :tangle no
2606;=====================================================
2607;
2608; To learn more about how to configure Polybar
2609; go to https://github.com/jaagr/polybar
2610;
2611; The README contains alot of information
2612;
2613;=====================================================
2614
2615[colors]
2616;background = ${xrdb:color0:#222}
2617background = #222
2618background-alt = #444
2619;foreground = ${xrdb:color7:#222}
2620foreground = #eee
2621foreground-alt = #888
2622primary = #ffb52a
2623secondary = #e60053
2624alert = #bd2c40
2625
2626[bar/main]
2627;monitor = ${env:MONITOR:HDMI-1}
2628width = 100%
2629height = 27
2630;offset-x = 1%
2631;offset-y = 1%
2632radius = 3.0
2633fixed-center = true
2634
2635background = ${colors.background}
2636foreground = ${colors.foreground}
2637
2638line-size = 3
2639line-color = #f00
2640
2641border-size = 4
2642border-color = #00000000
2643
2644padding-left = 0
2645padding-right = 2
2646
2647module-margin-left = 2
2648module-margin-right = 2
2649
2650font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
2651font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
2652font-2 = Wuncon Siji:pixelsize=10;1
2653font-3 = FontAwesome:pixelsize=10;1
2654
2655modules-left = bspwm xwindow
2656modules-center =
2657modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
2658
2659tray-position = right
2660tray-padding = 1
2661;tray-transparent = true
2662;tray-background = #0063ff
2663tray-maxsize = 18
2664
2665wm-restack = bspwm
2666
2667;override-redirect = true
2668
2669scroll-up = bspwm-desknext
2670scroll-down = bspwm-deskprev
2671
2672[module/xwindow]
2673type = internal/xwindow
2674label = %title:0:50:...%
2675
2676[module/xkeyboard]
2677type = internal/xkeyboard
2678blacklist-0 = num lock
2679
2680format-prefix = " "
2681format-prefix-foreground = ${colors.foreground-alt}
2682format-prefix-underline = ${colors.secondary}
2683
2684label-layout = %layout%
2685label-layout-underline = ${colors.secondary}
2686
2687label-indicator-padding = 2
2688label-indicator-margin = 1
2689label-indicator-background = ${colors.secondary}
2690label-indicator-underline = ${colors.secondary}
2691
2692[module/filesystem]
2693type = internal/fs
2694interval = 25
2695
2696mount-0 = /
2697
2698label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
2699label-unmounted = %mountpoint% not mounted
2700label-unmounted-foreground = ${colors.foreground-alt}
2701
2702[module/bspwm]
2703type = internal/bspwm
2704
2705label-focused = %index%
2706label-focused-background = ${colors.background-alt}
2707label-focused-underline= ${colors.primary}
2708label-focused-padding = 2
2709
2710label-occupied = %index%
2711label-occupied-padding = 2
2712
2713label-urgent = %index%!
2714label-urgent-background = ${colors.alert}
2715label-urgent-padding = 2
2716
2717label-empty = %index%
2718label-empty-foreground = ${colors.foreground-alt}
2719label-empty-padding = 2
2720
2721[module/i3]
2722type = internal/i3
2723format = <label-state> <label-mode>
2724index-sort = true
2725wrapping-scroll = false
2726
2727; Only show workspaces on the same output as the bar
2728;pin-workspaces = true
2729
2730label-mode-padding = 2
2731label-mode-foreground = #000
2732label-mode-background = ${colors.primary}
2733
2734; focused = Active workspace on focused monitor
2735label-focused = %index%
2736label-focused-background = ${module/bspwm.label-focused-background}
2737label-focused-underline = ${module/bspwm.label-focused-underline}
2738label-focused-padding = ${module/bspwm.label-focused-padding}
2739
2740; unfocused = Inactive workspace on any monitor
2741label-unfocused = %index%
2742label-unfocused-padding = ${module/bspwm.label-occupied-padding}
2743
2744; visible = Active workspace on unfocused monitor
2745label-visible = %index%
2746label-visible-background = ${self.label-focused-background}
2747label-visible-underline = ${self.label-focused-underline}
2748label-visible-padding = ${self.label-focused-padding}
2749
2750; urgent = Workspace with urgency hint set
2751label-urgent = %index%
2752label-urgent-background = ${module/bspwm.label-urgent-background}
2753label-urgent-padding = ${module/bspwm.label-urgent-padding}
2754
2755[module/mpd]
2756type = internal/mpd
2757format-online = <label-song> <icon-prev> <icon-stop> <toggle> <icon-next>
2758
2759icon-prev = 
2760icon-stop = 
2761icon-play = 
2762icon-pause = 
2763icon-next = 
2764
2765label-song-maxlen = 25
2766label-song-ellipsis = true
2767
2768[module/xbacklight]
2769type = internal/xbacklight
2770
2771format = <label> <bar>
2772label = BL
2773
2774bar-width = 10
2775bar-indicator = |
2776bar-indicator-foreground = #ff
2777bar-indicator-font = 2
2778bar-fill = ─
2779bar-fill-font = 2
2780bar-fill-foreground = #9f78e1
2781bar-empty = ─
2782bar-empty-font = 2
2783bar-empty-foreground = ${colors.foreground-alt}
2784
2785[module/backlight-acpi]
2786inherit = module/xbacklight
2787type = internal/backlight
2788;card = intel_backlight
2789card = mba6x_backlight
2790
2791[module/cpu]
2792type = internal/cpu
2793interval = 2
2794format-prefix = " "
2795format-prefix-foreground = ${colors.foreground-alt}
2796format-underline = #f90000
2797label = %percentage%%
2798
2799[module/memory]
2800type = internal/memory
2801interval = 2
2802format-prefix = " "
2803format-prefix-foreground = ${colors.foreground-alt}
2804format-underline = #4bffdc
2805label = %percentage_used%%
2806
2807[module/wlan]
2808type = internal/network
2809interface =
2810interval = 3.0
2811
2812format-connected = <ramp-signal> <label-connected>
2813format-connected-underline = #9f78e1
2814label-connected = %essid%
2815
2816format-disconnected =
2817;format-disconnected = <label-disconnected>
2818;format-disconnected-underline = ${self.format-connected-underline}
2819;label-disconnected = %ifname% disconnected
2820;label-disconnected-foreground = ${colors.foreground-alt}
2821
2822ramp-signal-0 = 
2823ramp-signal-1 = 
2824ramp-signal-2 = 
2825ramp-signal-3 = 
2826ramp-signal-4 = 
2827ramp-signal-foreground = ${colors.foreground-alt}
2828
2829[module/eth]
2830type = internal/network
2831interface =
2832interval = 3.0
2833
2834format-connected-underline = #55aa55
2835format-connected-prefix = " "
2836format-connected-prefix-foreground = ${colors.foreground-alt}
2837label-connected = %local_ip%
2838
2839format-disconnected =
2840;format-disconnected = <label-disconnected>
2841;format-disconnected-underline = ${self.format-connected-underline}
2842;label-disconnected = %ifname% disconnected
2843;label-disconnected-foreground = ${colors.foreground-alt}
2844
2845[module/date]
2846type = internal/date
2847interval = 5
2848
2849date =
2850date-alt = " %Y-%m-%d"
2851
2852time = %H:%M
2853time-alt = %H:%M:%S
2854
2855format-prefix = 
2856format-prefix-foreground = ${colors.foreground-alt}
2857format-underline = #0a6cf5
2858
2859label = %date% %time%
2860
2861[module/volume]
2862type = internal/volume
2863
2864format-volume = <label-volume> <bar-volume>
2865label-volume = vol
2866label-volume-foreground = ${root.foreground}
2867
2868format-muted-prefix = " "
2869format-muted-foreground = ${colors.foreground-alt}
2870label-muted = mute
2871
2872bar-volume-width = 10
2873bar-volume-foreground-0 = #55aa55
2874bar-volume-foreground-1 = #55aa55
2875bar-volume-foreground-2 = #55aa55
2876bar-volume-foreground-3 = #55aa55
2877bar-volume-foreground-4 = #55aa55
2878bar-volume-foreground-5 = #f5a70a
2879bar-volume-foreground-6 = #ff5555
2880bar-volume-gradient = false
2881bar-volume-indicator = |
2882bar-volume-indicator-font = 2
2883bar-volume-fill = ─
2884bar-volume-fill-font = 2
2885bar-volume-empty = ─
2886bar-volume-empty-font = 2
2887bar-volume-empty-foreground = ${colors.foreground-alt}
2888
2889[module/battery]
2890type = internal/battery
2891battery = BAT0
2892adapter = ADP1
2893full-at = 64
2894
2895format-charging = <animation-charging> <label-charging>
2896format-charging-underline = #ffb52a
2897
2898format-discharging = <ramp-capacity> <label-discharging>
2899format-discharging-underline = ${self.format-charging-underline}
2900
2901format-full-prefix = " "
2902format-full-prefix-foreground = ${colors.foreground-alt}
2903format-full-underline = ${self.format-charging-underline}
2904
2905ramp-capacity-0 = 
2906ramp-capacity-1 = 
2907ramp-capacity-2 = 
2908ramp-capacity-foreground = ${colors.foreground-alt}
2909
2910animation-charging-0 = 
2911animation-charging-1 = 
2912animation-charging-2 = 
2913animation-charging-foreground = ${colors.foreground-alt}
2914animation-charging-framerate = 750
2915
2916[module/temperature]
2917type = internal/temperature
2918thermal-zone = 1
2919warn-temperature = 66
2920
2921format = <ramp> <label>
2922format-underline = #f50a4d
2923format-warn = <ramp> <label-warn>
2924format-warn-underline = ${self.format-underline}
2925
2926label = %temperature%
2927label-warn = %temperature%
2928label-warn-foreground = ${colors.secondary}
2929
2930ramp-0 = 
2931ramp-1 = 
2932ramp-2 = 
2933ramp-foreground = ${colors.foreground-alt}
2934
2935[module/powermenu]
2936type = custom/menu
2937
2938format-spacing = 1
2939
2940label-open = 
2941label-open-foreground = ${colors.secondary}
2942label-close =  cancel
2943label-close-foreground = ${colors.secondary}
2944label-separator = |
2945label-separator-foreground = ${colors.foreground-alt}
2946
2947menu-0-0 = reboot
2948menu-0-0-exec = menu-open-1
2949menu-0-1 = power off
2950menu-0-1-exec = menu-open-2
2951
2952menu-1-0 = cancel
2953menu-1-0-exec = menu-open-0
2954menu-1-1 = reboot
2955menu-1-1-exec = sudo reboot
2956
2957menu-2-0 = power off
2958menu-2-0-exec = sudo poweroff
2959menu-2-1 = cancel
2960menu-2-1-exec = menu-open-0
2961
2962[module/mail]
2963type = custom/script
2964interval = 60
2965format = <label>
2966format-prefix = " "
2967format-prefix-foreground = ${colors.foreground-alt}
2968format-underline = #0a6cf5
2969exec = notmuch count tag:unread
2970
2971[settings]
2972screenchange-reload = true
2973;compositing-background = xor
2974;compositing-background = screen
2975;compositing-foreground = source
2976;compositing-border = over
2977
2978[global/wm]
2979margin-top = 0
2980margin-bottom = 0
2981
2982; vim:ft=dosini
2983#+end_src
2984
2985*** polybar-launch
2986:PROPERTIES:
2987:header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
2988:END:
2989
2990#+begin_src sh :tangle no
2991# Terminate already running bar instances
2992killall -q polybar
2993
2994# Wait until the processes have been shut down
2995while pgrep -x polybar >/dev/null; do sleep 1; done
2996
2997# Launch main bar
2998polybar main &
2999
3000echo "Bars launched..."
3001#+end_src
3002
3003** PowerTOP
3004:PROPERTIES:
3005:header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
3006:END:
3007
3008#+begin_src conf
3009[Unit]
3010Description=Powertop tunings
3011
3012[Service]
3013ExecStart=/usr/bin/powertop --auto-tune
3014RemainAfterExit=true
3015
3016[Install]
3017WantedBy=multi-user.target
3018#+end_src
3019
3020** ranger
3021
3022*** rc.conf
3023:PROPERTIES:
3024:header-args+: :tangle ~/.config/ranger/rc.conf
3025:END:
3026
3027#+begin_src conf :tangle no
3028# ===================================================================
3029# This file contains the default startup commands for ranger.
3030# To change them, it is recommended to create the file
3031# ~/.config/ranger/rc.conf and add your custom commands there.
3032#
3033# If you copy this whole file there, you may want to set the environment
3034# variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
3035#
3036# The purpose of this file is mainly to define keybindings and settings.
3037# For running more complex python code, please create a plugin in "plugins/" or
3038# a command in "commands.py".
3039#
3040# Each line is a command that will be run before the user interface
3041# is initialized. As a result, you can not use commands which rely
3042# on the UI such as :delete or :mark.
3043# ===================================================================
3044
3045# ===================================================================
3046# == Options
3047# ===================================================================
3048
3049# How many columns are there, and what are their relative widths?
3050set column_ratios 1,3,4
3051
3052# Which files should be hidden? (regular expression)
3053set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
3054
3055# Show hidden files? You can toggle this by typing 'zh'
3056set show_hidden false
3057
3058# Ask for a confirmation when running the "delete" command?
3059# Valid values are "always" (default), "never", "multiple"
3060# With "multiple", ranger will ask only if you delete multiple files at once.
3061set confirm_on_delete multiple
3062
3063# Which script is used to generate file previews?
3064# ranger ships with scope.sh, a script that calls external programs (see
3065# README for dependencies) to preview images, archives, etc.
3066set preview_script ~/.config/ranger/scope.sh
3067
3068# Use the external preview script or display simple plain text previews?
3069set use_preview_script true
3070
3071# Open all images in this directory when running certain image viewers
3072# like feh or sxiv? You can still open selected files by marking them.
3073set open_all_images true
3074
3075# Be aware of version control systems and display information.
3076set vcs_aware false
3077
3078# State of the three backends git, hg, bzr. The possible states are
3079# disabled, local (only show local info), enabled (show local and remote
3080# information).
3081set vcs_backend_git enabled
3082set vcs_backend_hg disabled
3083set vcs_backend_bzr disabled
3084
3085# Preview images in full color with the external command "w3mimgpreview"?
3086# This requires the console web browser "w3m" and a supported terminal.
3087# It has been successfully tested with "xterm" and "urxvt" without tmux.
3088set preview_images true
3089
3090# Use a unicode "..." character to mark cut-off filenames?
3091set unicode_ellipsis false
3092
3093# Show dotfiles in the bookmark preview box?
3094set show_hidden_bookmarks true
3095
3096# Which colorscheme to use? These colorschemes are available by default:
3097# default, jungle, snow
3098set colorscheme default
3099
3100# Preview files on the rightmost column?
3101# And collapse (shrink) the last column if there is nothing to preview?
3102set preview_files true
3103set preview_directories true
3104set collapse_preview true
3105
3106# Save the console history on exit?
3107set save_console_history true
3108
3109# Draw the status bar on top of the browser window (default: bottom)
3110set status_bar_on_top false
3111
3112# Draw a progress bar in the status bar which displays the average state of all
3113# currently running tasks which support progress bars?
3114set draw_progress_bar_in_status_bar true
3115
3116# Draw borders around columns?
3117set draw_borders true
3118
3119# Display the directory name in tabs?
3120set dirname_in_tabs false
3121
3122# Enable the mouse support?
3123set mouse_enabled true
3124
3125# Display the file size in the main column or status bar?
3126set display_size_in_main_column true
3127set display_size_in_status_bar true
3128
3129# Display files tags in all columns or only in main column?
3130set display_tags_in_all_columns true
3131
3132# Set a title for the window?
3133set update_title false
3134
3135# Set the title to "ranger" in the tmux program?
3136set update_tmux_title false
3137
3138# Shorten the title if it gets long? The number defines how many
3139# directories are displayed at once, 0 turns off this feature.
3140set shorten_title 3
3141
3142# Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
3143set tilde_in_titlebar false
3144
3145# How many directory-changes or console-commands should be kept in history?
3146set max_history_size 20
3147set max_console_history_size 50
3148
3149# Try to keep so much space between the top/bottom border when scrolling:
3150set scroll_offset 8
3151
3152# Flush the input after each key hit? (Noticable when ranger lags)
3153set flushinput true
3154
3155# Padding on the right when there's no preview?
3156# This allows you to click into the space to run the file.
3157set padding_right true
3158
3159# Save bookmarks (used with mX and `X) instantly?
3160# This helps to synchronize bookmarks between multiple ranger
3161# instances but leads to *slight* performance loss.
3162# When false, bookmarks are saved when ranger is exited.
3163set autosave_bookmarks true
3164
3165# You can display the "real" cumulative size of directories by using the
3166# command :get_cumulative_size or typing "dc". The size is expensive to
3167# calculate and will not be updated automatically. You can choose
3168# to update it automatically though by turning on this option:
3169set autoupdate_cumulative_size false
3170
3171# Turning this on makes sense for screen readers:
3172set show_cursor false
3173
3174# One of: size, basename, mtime, type
3175set sort natural
3176
3177# Additional sorting options
3178set sort_reverse false
3179set sort_case_insensitive true
3180set sort_directories_first true
3181
3182# Enable this if key combinations with the Alt Key don't work for you.
3183# (Especially on xterm)
3184set xterm_alt_key false
3185
3186# ===================================================================
3187# == Local Options
3188# ===================================================================
3189# You can set local options that only affect a single directory.
3190
3191# Examples:
3192# setlocal path=~/downloads sort mtime
3193
3194# ===================================================================
3195# == Command Aliases in the Console
3196# ===================================================================
3197
3198alias e edit
3199alias q quit
3200alias q! quitall
3201alias qall quitall
3202alias setl setlocal
3203
3204alias filter scout -prt
3205alias find scout -aet
3206alias mark scout -mr
3207alias unmark scout -Mr
3208alias search scout -rs
3209alias search_inc scout -rts
3210alias travel scout -aefiklst
3211
3212# ===================================================================
3213# == Define keys for the browser
3214# ===================================================================
3215
3216# Basic
3217map Q quit!
3218map q quit
3219copymap q ZZ ZQ
3220
3221map R reload_cwd
3222map <C-r> reset
3223map <C-l> redraw_window
3224map <C-c> abort
3225map <esc> change_mode normal
3226
3227map i display_file
3228map ? help
3229map W display_log
3230map w taskview_open
3231map S shell $SHELL
3232
3233map : console
3234map ; console
3235map ! console shell
3236map @ console -p6 shell %%s
3237map # console shell -p
3238map s console shell
3239map r chain draw_possible_programs; console open_with
3240map f console find
3241map cd console cd
3242
3243# Tagging / Marking
3244map t tag_toggle
3245map ut tag_remove
3246map "<any> tag_toggle tag=%any
3247map <Space> mark_files toggle=True
3248map v mark_files all=True toggle=True
3249map uv mark_files all=True val=False
3250map V toggle_visual_mode
3251map uV toggle_visual_mode reverse=True
3252
3253# For the nostalgics: Midnight Commander bindings
3254map <F1> help
3255map <F3> display_file
3256map <F4> edit
3257map <F5> copy
3258map <F6> cut
3259map <F7> console mkdir
3260map <F8> console delete
3261map <F10> exit
3262
3263# In case you work on a keyboard with dvorak layout
3264map <UP> move up=1
3265map <DOWN> move down=1
3266map <LEFT> move left=1
3267map <RIGHT> move right=1
3268map <HOME> move to=0
3269map <END> move to=-1
3270map <PAGEDOWN> move down=1 pages=True
3271map <PAGEUP> move up=1 pages=True
3272map <CR> move right=1
3273map <DELETE> console delete
3274map <INSERT> console touch
3275
3276# VIM-like
3277copymap <UP> k
3278copymap <DOWN> j
3279copymap <LEFT> h
3280copymap <RIGHT> l
3281copymap <HOME> gg
3282copymap <END> G
3283copymap <PAGEDOWN> <C-F>
3284copymap <PAGEUP> <C-B>
3285
3286map J move down=0.5 pages=True
3287map K move up=0.5 pages=True
3288copymap J <C-D>
3289copymap K <C-U>
3290
3291# Jumping around
3292map H history_go -1
3293map L history_go 1
3294map ] move_parent 1
3295map [ move_parent -1
3296map } traverse
3297
3298map gh cd ~
3299map ge cd /etc
3300map gu cd /usr
3301map gd cd /dev
3302map gl cd -r .
3303map gL cd -r %f
3304map go cd /opt
3305map gv cd /var
3306map gm cd /media
3307map gM cd /mnt
3308map gs cd /srv
3309map gr cd /
3310map gR eval fm.cd(ranger.RANGERDIR)
3311map g/ cd /
3312map g? cd /usr/share/doc/ranger
3313
3314# External Programs
3315map E edit
3316map du shell -p du --max-depth=1 -h --apparent-size
3317map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
3318map yp shell -d echo -n %d/%f | xsel -i
3319map yd shell -d echo -n %d | xsel -i
3320map yn shell -d echo -n %f | xsel -i
3321
3322# Filesystem Operations
3323map = chmod
3324
3325map cw console rename
3326map A eval fm.open_console('rename ' + fm.thisfile.basename)
3327map I eval fm.open_console('rename ' + fm.thisfile.basename, position=7)
3328
3329map pp paste
3330map po paste overwrite=True
3331map pl paste_symlink relative=False
3332map pL paste_symlink relative=True
3333map phl paste_hardlink
3334map pht paste_hardlinked_subtree
3335
3336map dd cut
3337map ud uncut
3338map da cut mode=add
3339map dr cut mode=remove
3340
3341map yy copy
3342map uy uncut
3343map ya copy mode=add
3344map yr copy mode=remove
3345
3346# Temporary workarounds
3347map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
3348map dG eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
3349map dj eval fm.cut(dirarg=dict(down=1), narg=quantifier)
3350map dk eval fm.cut(dirarg=dict(up=1), narg=quantifier)
3351map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
3352map yG eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
3353map yj eval fm.copy(dirarg=dict(down=1), narg=quantifier)
3354map yk eval fm.copy(dirarg=dict(up=1), narg=quantifier)
3355
3356# Searching
3357map / console search
3358map n search_next
3359map N search_next forward=False
3360map ct search_next order=tag
3361map cs search_next order=size
3362map ci search_next order=mimetype
3363map cc search_next order=ctime
3364map cm search_next order=mtime
3365map ca search_next order=atime
3366
3367# Tabs
3368map <C-n> tab_new ~
3369map <C-w> tab_close
3370map <TAB> tab_move 1
3371map <S-TAB> tab_move -1
3372map <A-Right> tab_move 1
3373map <A-Left> tab_move -1
3374map gt tab_move 1
3375map gT tab_move -1
3376map gn tab_new ~
3377map gc tab_close
3378map uq tab_restore
3379map <a-1> tab_open 1
3380map <a-2> tab_open 2
3381map <a-3> tab_open 3
3382map <a-4> tab_open 4
3383map <a-5> tab_open 5
3384map <a-6> tab_open 6
3385map <a-7> tab_open 7
3386map <a-8> tab_open 8
3387map <a-9> tab_open 9
3388
3389# Sorting
3390map or toggle_option sort_reverse
3391map os chain set sort=size; set sort_reverse=False
3392map ob chain set sort=basename; set sort_reverse=False
3393map on chain set sort=natural; set sort_reverse=False
3394map om chain set sort=mtime; set sort_reverse=False
3395map oc chain set sort=ctime; set sort_reverse=False
3396map oa chain set sort=atime; set sort_reverse=False
3397map ot chain set sort=type; set sort_reverse=False
3398
3399map oS chain set sort=size; set sort_reverse=True
3400map oB chain set sort=basename; set sort_reverse=True
3401map oN chain set sort=natural; set sort_reverse=True
3402map oM chain set sort=mtime; set sort_reverse=True
3403map oC chain set sort=ctime; set sort_reverse=True
3404map oA chain set sort=atime; set sort_reverse=True
3405map oT chain set sort=type; set sort_reverse=True
3406
3407map dc get_cumulative_size
3408
3409# Settings
3410map zc toggle_option collapse_preview
3411map zd toggle_option sort_directories_first
3412map zh toggle_option show_hidden
3413map <C-h> toggle_option show_hidden
3414map zi toggle_option flushinput
3415map zm toggle_option mouse_enabled
3416map zp toggle_option preview_files
3417map zP toggle_option preview_directories
3418map zs toggle_option sort_case_insensitive
3419map zu toggle_option autoupdate_cumulative_size
3420map zv toggle_option use_preview_script
3421map zf console filter
3422
3423# Bookmarks
3424map `<any> enter_bookmark %any
3425map '<any> enter_bookmark %any
3426map m<any> set_bookmark %any
3427map um<any> unset_bookmark %any
3428
3429map m<bg> draw_bookmarks
3430copymap m<bg> um<bg> `<bg> '<bg>
3431
3432# Generate all the chmod bindings with some python help:
3433eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
3434eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
3435eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
3436eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
3437eval for arg in "rwxXst": cmd("map +{0} shell -d chmod u+{0} %s".format(arg))
3438
3439eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
3440eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
3441eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
3442eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
3443eval for arg in "rwxXst": cmd("map -{0} shell -d chmod u-{0} %s".format(arg))
3444
3445# ===================================================================
3446# == Define keys for the console
3447# ===================================================================
3448# Note: Unmapped keys are passed directly to the console.
3449
3450# Basic
3451cmap <tab> eval fm.ui.console.tab()
3452cmap <s-tab> eval fm.ui.console.tab(-1)
3453cmap <ESC> eval fm.ui.console.close()
3454cmap <CR> eval fm.ui.console.execute()
3455cmap <C-l> redraw_window
3456
3457copycmap <ESC> <C-c>
3458copycmap <CR> <C-j>
3459
3460# Move around
3461cmap <up> eval fm.ui.console.history_move(-1)
3462cmap <down> eval fm.ui.console.history_move(1)
3463cmap <left> eval fm.ui.console.move(left=1)
3464cmap <right> eval fm.ui.console.move(right=1)
3465cmap <home> eval fm.ui.console.move(right=0, absolute=True)
3466cmap <end> eval fm.ui.console.move(right=-1, absolute=True)
3467
3468# Line Editing
3469cmap <backspace> eval fm.ui.console.delete(-1)
3470cmap <delete> eval fm.ui.console.delete(0)
3471cmap <C-w> eval fm.ui.console.delete_word()
3472cmap <C-k> eval fm.ui.console.delete_rest(1)
3473cmap <C-u> eval fm.ui.console.delete_rest(-1)
3474cmap <C-y> eval fm.ui.console.paste()
3475
3476# And of course the emacs way
3477copycmap <up> <C-p>
3478copycmap <down> <C-n>
3479copycmap <left> <C-b>
3480copycmap <right> <C-f>
3481copycmap <home> <C-a>
3482copycmap <end> <C-e>
3483copycmap <delete> <C-d>
3484copycmap <backspace> <C-h>
3485
3486# Note: There are multiple ways to express backspaces. <backspace> (code 263)
3487# and <backspace2> (code 127). To be sure, use both.
3488copycmap <backspace> <backspace2>
3489
3490# This special expression allows typing in numerals:
3491cmap <allow_quantifiers> false
3492
3493# ===================================================================
3494# == Pager Keybindings
3495# ===================================================================
3496
3497# Movement
3498pmap <down> pager_move down=1
3499pmap <up> pager_move up=1
3500pmap <left> pager_move left=4
3501pmap <right> pager_move right=4
3502pmap <home> pager_move to=0
3503pmap <end> pager_move to=-1
3504pmap <pagedown> pager_move down=1.0 pages=True
3505pmap <pageup> pager_move up=1.0 pages=True
3506pmap <C-d> pager_move down=0.5 pages=True
3507pmap <C-u> pager_move up=0.5 pages=True
3508
3509copypmap <UP> k <C-p>
3510copypmap <DOWN> j <C-n> <CR>
3511copypmap <LEFT> h
3512copypmap <RIGHT> l
3513copypmap <HOME> g
3514copypmap <END> G
3515copypmap <C-d> d
3516copypmap <C-u> u
3517copypmap <PAGEDOWN> n f <C-F> <Space>
3518copypmap <PAGEUP> p b <C-B>
3519
3520# Basic
3521pmap <ESC> pager_close
3522copypmap <ESC> q Q i <F3>
3523pmap E edit_file
3524
3525# ===================================================================
3526# == Taskview Keybindings
3527# ===================================================================
3528
3529# Movement
3530tmap <up> taskview_move up=1
3531tmap <down> taskview_move down=1
3532tmap <home> taskview_move to=0
3533tmap <end> taskview_move to=-1
3534tmap <pagedown> taskview_move down=1.0 pages=True
3535tmap <pageup> taskview_move up=1.0 pages=True
3536tmap <C-d> taskview_move down=0.5 pages=True
3537tmap <C-u> taskview_move up=0.5 pages=True
3538
3539copytmap <UP> k <C-p>
3540copytmap <DOWN> j <C-n> <CR>
3541copytmap <HOME> g
3542copytmap <END> G
3543copytmap <C-u> u
3544copytmap <PAGEDOWN> n f <C-F> <Space>
3545copytmap <PAGEUP> p b <C-B>
3546
3547# Changing priority and deleting tasks
3548tmap J eval -q fm.ui.taskview.task_move(-1)
3549tmap K eval -q fm.ui.taskview.task_move(0)
3550tmap dd eval -q fm.ui.taskview.task_remove()
3551tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
3552tmap <pageup> eval -q fm.ui.taskview.task_move(0)
3553tmap <delete> eval -q fm.ui.taskview.task_remove()
3554
3555# Basic
3556tmap <ESC> taskview_close
3557copytmap <ESC> q Q w <C-c>
3558#+end_src
3559
3560*** scope.sh
3561:PROPERTIES:
3562:header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
3563:END:
3564
3565#+begin_src sh :tangle no
3566# ranger supports enhanced previews. If the option "use_preview_script"
3567# is set to True and this file exists, this script will be called and its
3568# output is displayed in ranger. ANSI color codes are supported.
3569
3570# NOTES: This script is considered a configuration file. If you upgrade
3571# ranger, it will be left untouched. (You must update it yourself.)
3572# Also, ranger disables STDIN here, so interactive scripts won't work properly
3573
3574# Meanings of exit codes:
3575# code | meaning | action of ranger
3576# -----+------------+-------------------------------------------
3577# 0 | success | success. display stdout as preview
3578# 1 | no preview | failure. display no preview at all
3579# 2 | plain text | display the plain content of the file
3580# 3 | fix width | success. Don't reload when width changes
3581# 4 | fix height | success. Don't reload when height changes
3582# 5 | fix both | success. Don't ever reload
3583
3584# Meaningful aliases for arguments:
3585path="$1" # Full path of the selected file
3586width="$2" # Width of the preview pane (number of fitting characters)
3587height="$3" # Height of the preview pane (number of fitting characters)
3588
3589maxln=200 # Stop after $maxln lines. Can be used like ls | head -n $maxln
3590
3591# Find out something about the file:
3592mimetype=$(file --mime-type -Lb "$path")
3593extension=${path##*.}
3594
3595# Functions:
3596# runs a command and saves its output into $output. Useful if you need
3597# the return value AND want to use the output in a pipe
3598try() { output=$(eval '"$@"'); }
3599
3600# writes the output of the previouosly used "try" command
3601dump() { echo "$output"; }
3602
3603# a common post-processing function used after most commands
3604trim() { head -n "$maxln"; }
3605
3606# wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
3607highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }
3608
3609case "$extension" in
3610 # Archive extensions:
3611 7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
3612 rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
3613 try als "$path" && { dump | trim; exit 0; }
3614 try acat "$path" && { dump | trim; exit 3; }
3615 try bsdtar -lf "$path" && { dump | trim; exit 0; }
3616 exit 1;;
3617 rar)
3618 try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
3619 # PDF documents:
3620 pdf)
3621 try pdftotext -l 10 -nopgbrk -q "$path" - && \
3622 { dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
3623 # BitTorrent Files
3624 torrent)
3625 try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
3626 # HTML Pages:
3627 htm|html|xhtml)
3628 try w3m -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3629 try lynx -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3630 try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3631 ;; # fall back to highlight/cat if the text browsers fail
3632esac
3633
3634case "$mimetype" in
3635 # Syntax highlight for text files:
3636 text/* | */xml)
3637 try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
3638 # Ascii-previews of images:
3639 image/*)
3640 img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
3641 # Display information about media files:
3642 video/* | audio/*)
3643 exiftool "$path" && exit 5
3644 # Use sed to remove spaces so the output fits into the narrow window
3645 try mediainfo "$path" && { dump | trim | sed 's/ \+:/: /;'; exit 5; } || exit 1;;
3646esac
3647
3648exit 1
3649#+end_src
3650
3651** redshift
3652:PROPERTIES:
3653:header-args+: :tangle ~/.config/redshift.conf :comments none
3654:END:
3655
3656#+begin_src conf
3657; Global settings for redshift
3658[redshift]
3659; Set the day and night screen temperatures (Neutral is 6500K)
3660;temp-day=5700
3661;temp-night=3500
3662
3663;temp-day=6500
3664temp-day=6200
3665;temp-night=4800
3666;temp-night=5000
3667;temp-night=4500
3668temp-night=4000
3669
3670; Enable/Disable a smooth transition between day and night
3671; 0 will cause a direct change from day to night screen temperature.
3672; 1 will gradually increase or decrease the screen temperature.
3673transition=1
3674
3675; Set the screen brightness. Default is 1.0.
3676;brightness=0.9
3677; It is also possible to use different settings for day and night
3678; since version 1.8.
3679;brightness-day=0.7
3680;brightness-night=0.4
3681; Set the screen gamma (for all colors, or each color channel
3682; individually)
3683;gamma=0.8
3684;gamma=1.0
3685;gamma=0.8:0.7:0.8
3686; This can also be set individually for day and night since
3687; version 1.10.
3688;gamma-day=0.8:0.7:0.8
3689;gamma-night=0.6
3690
3691; Set the location-provider: 'geoclue2' or 'manual'
3692; type 'redshift -l list' to see possible values.
3693; The location provider settings are in a different section.
3694;location-provider=manual
3695location-provider=geoclue2
3696
3697; Set the adjustment-method: 'randr', 'vidmode'
3698; type 'redshift -m list' to see all possible values.
3699; 'randr' is the preferred method, 'vidmode' is an older API.
3700; but works in some cases when 'randr' does not.
3701; The adjustment method settings are in a different section.
3702adjustment-method=randr
3703
3704; Configuration of the location-provider:
3705; type 'redshift -l PROVIDER:help' to see the settings.
3706; ex: 'redshift -l manual:help'
3707; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
3708; are negative numbers.
3709;[manual]
3710;lat=48.1
3711;lon=11.6
3712
3713; Configuration of the adjustment-method
3714; type 'redshift -m METHOD:help' to see the settings.
3715; ex: 'redshift -m randr:help'
3716; In this example, randr is configured to adjust screen 1.
3717; Note that the numbering starts from 0, so this is actually the
3718; second screen. If this option is not specified, Redshift will try
3719; to adjust _all_ screens.
3720;[randr]
3721;screen=1
3722#+end_src
3723
3724** rofi
3725:PROPERTIES:
3726:header-args+: :tangle ~/.config/rofi/config
3727:END:
3728
3729#+begin_src conf
3730! rofi.font: Ubuntu Mono 13
3731! rofi.font: Inconsolata 16
3732! rofi.font: Iosevka 13
3733! rofi.font: Source Code Pro 11
3734rofi.font: Source Code Pro 10.5
3735rofi.modi: run,window
3736! rofi.width: 640
3737rofi.width: 600
3738!rofi.location: 2
3739!rofi.yoffset: 200
3740rofi.monitor: -1
3741!rofi.lines: 10
3742
3743!rofi.theme: /usr/share/rofi/themes//Arc.rasi
3744!rofi.theme: /usr/share/rofi/themes//Paper.rasi
3745!rofi.theme: /usr/share/rofi/themes//sidebar.rasi
3746
3747rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
3748#+end_src
3749
3750** rofi-pass
3751:PROPERTIES:
3752:header-args+: :tangle ~/.config/rofi-pass/config
3753:END:
3754
3755#+begin_src conf
3756# permanently set alternative root dir
3757# root=/path/to/root
3758
3759# rofi command. Make sure to have "$@" as last argument
3760_rofi () {
3761 #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
3762 rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
3763}
3764
3765# xdotool needs the keyboard layout to be set using setxkbmap
3766# You can do this in your autostart scripts (e.g. xinitrc)
3767
3768# If for some reason, you cannot do this, you can set the command here.
3769# and set fix_layout to true
3770fix_layout=false
3771
3772layout_cmd () {
3773 setxkbmap us
3774}
3775
3776# fields to be used
3777URL_field='url'
3778USERNAME_field='user'
3779AUTOTYPE_field='autotype'
3780
3781# delay to be used for :delay keyword
3782delay=2
3783
3784## Programs to be used
3785# Editor
3786EDITOR='gvim -f'
3787
3788# Browser
3789BROWSER='chromium'
3790
3791## Misc settings
3792
3793default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
3794auto_enter='false'
3795notify='false'
3796default_autotype='user :tab pass'
3797
3798# color of the help messages
3799# leave empty for autodetection
3800help_color="#4872FF"
3801
3802# Clipboard settings
3803# Possible options: primary, clipboard, both
3804clip=primary
3805
3806# Options for generating new password entries
3807# default_user is also used for password files that have no user field.
3808default_user=aminb
3809default_user2=aminban
3810password_length=30
3811
3812# Custom Keybindings
3813#autotype="Alt+1"
3814autotype="Alt+m"
3815type_user="Alt+2"
3816type_pass="Alt+3"
3817open_url="Alt+4"
3818copy_name="Alt+u"
3819copy_url="Alt+l"
3820copy_pass="Alt+p"
3821show="Alt+o"
3822copy_entry="Alt+2"
3823type_entry="Alt+1"
3824copy_menu="Alt+c"
3825action_menu="Alt+a"
3826type_menu="Alt+t"
3827help="Alt+h"
3828switch="Alt+x"
3829insert_pass="Alt+n"
3830#+end_src
3831
3832** sway
3833
3834*** main
3835:PROPERTIES:
3836:header-args+: :tangle ~/.config/sway/config
3837:END:
3838
3839#+begin_src conf
3840### Variables
3841# super
3842set $mod Mod4
3843# alt
3844set $mod2 Mod1
3845set $left h
3846set $down j
3847set $up k
3848set $right l
3849set $term urxvt
3850set $menu rofi -show run -display-run '> ' -display-window ' 🗔 '
3851
3852### Output configuration
3853#
3854# Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/)
3855output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
3856#
3857# Example configuration:
3858#
3859# output HDMI-A-1 resolution 1920x1080 position 1920,0
3860#
3861# You can get the names of your outputs by running: swaymsg -t get_outputs
3862
3863### Idle configuration
3864
3865exec swayidle \
3866 timeout 120 '[ -f ~/.nosleep ] || swaymsg "output * dpms off"' \
3867 resume '[ -f ~/.nosleep ] || swaymsg "output * dpms on"' \
3868
3869
3870### Key bindings
3871#
3872# Basics:
3873#
3874 # start a terminal
3875 bindsym $mod+Return exec $term
3876 bindsym $mod+Shift+Return exec $term -name floating
3877 for_window [class="URxvt" instance="floating"] floating enable
3878
3879 # kill focused window
3880 bindsym $mod+Shift+q kill
3881
3882 # start your launcher
3883 bindsym $mod+d exec $menu
3884
3885 # password manager
3886 bindsym $mod2+space exec rofi-pass
3887
3888 # Drag floating windows by holding down $mod and left mouse button.
3889 # Resize them with right mouse button + $mod.
3890 # Despite the name, also works for non-floating windows.
3891 # Change normal to inverse to use left mouse button for resizing and right
3892 # mouse button for dragging.
3893 floating_modifier $mod normal
3894
3895 # reload the configuration file
3896 bindsym $mod+Shift+c reload
3897
3898 # exit sway (logs you out of your wayland session)
3899 bindsym $mod+Shift+e exit
3900
3901 bindsym $mod+apostrophe exec rofi-light # rofi-based brightness chooser
3902 bindsym XF86MonBrightnessUp exec light -A 5 # increase screen brightness
3903 bindsym XF86MonBrightnessDown exec light -U 5 # decrease screen brightness
3904
3905 bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
3906 bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
3907 bindsym XF86AudioMute exec pamixer --toggle-mute
3908 bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
3909
3910 bindsym $mod+Shift+apostrophe exec rofi-remmina.py # choose remmina connection
3911
3912 # original sway workspace switch and window move
3913 bindsym $mod+bracketleft workspace prev
3914 bindsym $mod+bracketright workspace next
3915 bindsym $mod+braceleft move container to workspace prev
3916 bindsym $mod+braceright move container to workspace next
3917
3918 # bspwm-esque workspace switch and window move
3919 bindsym $mod2+bracketleft exec sway-ws-util switch prev
3920 bindsym $mod2+bracketright exec sway-ws-util switch next
3921 bindsym $mod2+braceleft exec sway-ws-util move prev follow
3922 bindsym $mod2+braceright exec sway-ws-util move next follow
3923#
3924# Moving around:
3925#
3926 # Move your focus around
3927 bindsym $mod+$left focus left
3928 bindsym $mod+$down focus down
3929 bindsym $mod+$up focus up
3930 bindsym $mod+$right focus right
3931 # or use $mod+[up|down|left|right]
3932 bindsym $mod+Left focus left
3933 bindsym $mod+Down focus down
3934 bindsym $mod+Up focus up
3935 bindsym $mod+Right focus right
3936
3937 # _move_ the focused window with the same, but add Shift
3938 bindsym $mod+Shift+$left move left
3939 bindsym $mod+Shift+$down move down
3940 bindsym $mod+Shift+$up move up
3941 bindsym $mod+Shift+$right move right
3942 # ditto, with arrow keys
3943 bindsym $mod+Shift+Left move left
3944 bindsym $mod+Shift+Down move down
3945 bindsym $mod+Shift+Up move up
3946 bindsym $mod+Shift+Right move right
3947#
3948# Workspaces:
3949#
3950 # switch to workspace
3951 bindsym $mod+1 workspace 1
3952 bindsym $mod+2 workspace 2
3953 bindsym $mod+3 workspace 3
3954 bindsym $mod+4 workspace 4
3955 bindsym $mod+5 workspace 5
3956 bindsym $mod+6 workspace 6
3957 bindsym $mod+7 workspace 7
3958 bindsym $mod+8 workspace 8
3959 bindsym $mod+9 workspace 9
3960 bindsym $mod+0 workspace 10
3961 # move focused container to workspace
3962 bindsym $mod+Shift+1 move container to workspace 1
3963 bindsym $mod+Shift+2 move container to workspace 2
3964 bindsym $mod+Shift+3 move container to workspace 3
3965 bindsym $mod+Shift+4 move container to workspace 4
3966 bindsym $mod+Shift+5 move container to workspace 5
3967 bindsym $mod+Shift+6 move container to workspace 6
3968 bindsym $mod+Shift+7 move container to workspace 7
3969 bindsym $mod+Shift+8 move container to workspace 8
3970 bindsym $mod+Shift+9 move container to workspace 9
3971 bindsym $mod+Shift+0 move container to workspace 10
3972 # Note: workspaces can have any name you want, not just numbers.
3973 # We just use 1-10 as the default.
3974#
3975# Layout stuff:
3976#
3977 # You can "split" the current object of your focus with
3978 # $mod+b or $mod+v, for horizontal and vertical splits
3979 # respectively.
3980 bindsym $mod+b splith
3981 bindsym $mod+v splitv
3982
3983 # Switch the current container between different layout styles
3984 bindsym $mod+s layout stacking
3985 bindsym $mod+w layout tabbed
3986 bindsym $mod+e layout toggle split
3987
3988 # Make the current focus fullscreen
3989 bindsym $mod+f fullscreen
3990
3991 # Toggle the current focus between tiling and floating mode
3992 bindsym $mod+Shift+space floating toggle
3993
3994 # Swap focus between the tiling area and the floating area
3995 bindsym $mod+space focus mode_toggle
3996
3997 # move focus to the parent container
3998 bindsym $mod+a focus parent
3999#
4000# Scratchpad:
4001#
4002 # Sway has a "scratchpad", which is a bag of holding for windows.
4003 # You can send windows there and get them back later.
4004
4005 # Move the currently focused window to the scratchpad
4006 bindsym $mod+Shift+minus move scratchpad
4007
4008 # Show the next scratchpad window or hide the focused scratchpad window.
4009 # If there are multiple scratchpad windows, this command cycles through them.
4010 bindsym $mod+minus scratchpad show
4011#
4012# Resizing containers:
4013#
4014mode "resize" {
4015 # left will shrink the containers width
4016 # right will grow the containers width
4017 # up will shrink the containers height
4018 # down will grow the containers height
4019 bindsym $left resize shrink width 10px
4020 bindsym $down resize grow height 10px
4021 bindsym $up resize shrink height 10px
4022 bindsym $right resize grow width 10px
4023
4024 # ditto, with arrow keys
4025 bindsym Left resize shrink width 10px
4026 bindsym Down resize grow height 10px
4027 bindsym Up resize shrink height 10px
4028 bindsym Right resize grow width 10px
4029
4030 # return to default mode
4031 bindsym Return mode "default"
4032 bindsym Escape mode "default"
4033}
4034bindsym $mod+Shift+r mode "resize"
4035
4036#
4037# Power button
4038#
4039
4040set $mode_system System (l)ock, (e)xit sway, (s)uspend, (h)ibernate, (r)eboot, (S)hutdown
4041mode "$mode_system" {
4042 bindsym l exec swaylock, mode "default"
4043 bindsym e exec swaymsg exit, mode "default"
4044 bindsym s exec systemctl suspend, mode "default"
4045 bindsym h exec systemctl hibernate, mode "default"
4046 bindsym r exec systemctl reboot, mode "default"
4047 bindsym Shift+s exec systemctl poweroff -i, mode "default"
4048
4049 # back to normal: Enter, Escape, or q
4050 bindsym Return mode "default"
4051 bindsym Escape mode "default"
4052 bindsym q mode "default"
4053}
4054bindsym XF86PowerOff mode "$mode_system"
4055
4056#
4057# Presentation mode
4058#
4059
4060bindsym $mod+$mod2+p exec ([ ! -e ~/.nosleep ] && touch ~/.nosleep || rm ~/.nosleep) && killall -USR1 i3status
4061
4062#
4063# Notifications
4064#
4065
4066bindsym $mod+Shift+n mode notifications
4067mode notifications {
4068 bindsym Return exec makoctl invoke; exec makoctl dismiss; mode default
4069 bindsym d exec makoctl dismiss; mode default
4070 bindsym Shift+d exec makoctl dismiss -a; mode default
4071
4072 bindsym Escape mode default
4073 bindsym q mode default
4074}
4075
4076#
4077# Screenshotting
4078#
4079
4080bindsym $mod+Shift+s mode screenshot
4081mode screenshot {
4082 bindsym a exec grim $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
4083 bindsym r exec slurp | grim -g - $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
4084
4085 bindsym Escape mode default
4086 bindsym q mode default
4087}
4088
4089#
4090# Status Bar:
4091#
4092# Read `man 5 sway-bar` for more information about this section.
4093bar {
4094 position bottom
4095 colors {
4096 statusline #ffffff
4097 background #323232
4098 inactive_workspace #32323200 #32323200 #5c5c5c
4099 }
4100 status_command i3status | my-i3status.py
4101}
4102
4103# font pango: benis uushi 9
4104# font pango: Ubuntu Mono 11
4105# font pango: Inconsolata 11
4106font pango: DejaVu Sans Mono 9
4107# font pango: Liberation Mono 9
4108
4109exec xrdb .Xresources
4110exec pgrep -x "systemd-inhibit" || \
4111 systemd-inhibit --what=handle-power-key --who=aminb \
4112 --why="Handle power button in sway" sleep infinity
4113exec mako 2>&1 >/tmp/mako.log
4114exec /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
4115
4116include /etc/sway/config.d/*
4117include ~/.config/sway/`hostname`
4118
4119exec systemd-notify --ready || true
4120
4121#+end_src
4122
4123*** langa
4124:PROPERTIES:
4125:header-args+: :tangle ~/.config/sway/langa
4126:END:
4127
4128#+begin_src conf
4129input "2:7:SynPS/2_Synaptics_TouchPad" {
4130 events disabled
4131 dwt enabled
4132 tap enabled
4133 natural_scroll enabled
4134 click_method clickfinger
4135}
4136
4137input "1:1:AT_Translated_Set_2_keyboard" {
4138 repeat_delay 200
4139 repeat_rate 45
4140 xkb_layout us_ab,ir
4141 xkb_options ctrl:nocaps,altwin:swap_alt_win,grp:shifts_toggle
4142}
4143#+end_src
4144
4145*** shemshak
4146:PROPERTIES:
4147:header-args+: :tangle ~/.config/sway/shemshak
4148:END:
4149
4150#+begin_src conf
4151input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
4152 dwt enabled
4153 tap enabled
4154 natural_scroll enabled
4155 middle_emulation enabled
4156 click_method clickfinger
4157}
4158
4159input "1:1:AT_Translated_Set_2_keyboard" {
4160 repeat_delay 200
4161 repeat_rate 45
4162 xkb_layout us,ir
4163 xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
4164}
4165#+end_src
4166** swaylock
4167:PROPERTIES:
4168:header-args+: :tangle ~/.config/swaylock/config
4169:END:
4170
4171#+begin_src conf
4172image=/home/amin/usr/pics/wp/wp2445784-blurred-wallpapers.jpg
4173scaling=fill
4174#+end_src
4175
4176** TLP
4177
4178*** langa
4179
4180#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "langa")) "/sudo::/etc/default/tlp")
4181# ------------------------------------------------------------------------------
4182# tlp - Parameters for power saving
4183# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
4184
4185# Hint: some features are disabled by default, remove the leading # to enable
4186# them.
4187
4188# Set to 0 to disable, 1 to enable TLP.
4189TLP_ENABLE=1
4190
4191# Operation mode when no power supply can be detected: AC, BAT.
4192# Concerns some desktop and embedded hardware only.
4193TLP_DEFAULT_MODE=AC
4194
4195# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
4196# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
4197TLP_PERSISTENT_DEFAULT=0
4198
4199# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
4200# Non-zero value enables, zero disables laptop mode.
4201DISK_IDLE_SECS_ON_AC=0
4202DISK_IDLE_SECS_ON_BAT=2
4203
4204# Dirty page values (timeouts in secs).
4205MAX_LOST_WORK_SECS_ON_AC=15
4206MAX_LOST_WORK_SECS_ON_BAT=60
4207
4208# Hint: CPU parameters below are disabled by default, remove the leading #
4209# to enable them, otherwise kernel default values are used.
4210
4211# Select a CPU frequency scaling governor.
4212# Intel Core i processor with intel_pstate driver:
4213# powersave(*), performance.
4214# Older hardware with acpi-cpufreq driver:
4215# ondemand(*), powersave, performance, conservative, schedutil.
4216# (*) is recommended.
4217# Hint: use tlp-stat -p to show the active driver and available governors.
4218# Important:
4219# powersave for intel_pstate and ondemand for acpi-cpufreq are power
4220# efficient for *almost all* workloads and therefore kernel and most
4221# distributions have chosen them as defaults. If you still want to change,
4222# you should know what you're doing! You *must* disable your distribution's
4223# governor settings or conflicts will occur.
4224#CPU_SCALING_GOVERNOR_ON_AC=powersave
4225#CPU_SCALING_GOVERNOR_ON_BAT=powersave
4226
4227# Set the min/max frequency available for the scaling governor.
4228# Possible values strongly depend on your CPU. For available frequencies see
4229# the output of tlp-stat -p.
4230#CPU_SCALING_MIN_FREQ_ON_AC=0
4231#CPU_SCALING_MAX_FREQ_ON_AC=0
4232#CPU_SCALING_MIN_FREQ_ON_BAT=0
4233#CPU_SCALING_MAX_FREQ_ON_BAT=0
4234
4235# Set energy performance hints (HWP) for Intel P-state governor:
4236# performance, balance_performance, default, balance_power, power
4237# Values are given in order of increasing power saving.
4238# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
4239CPU_HWP_ON_AC=balance_performance
4240CPU_HWP_ON_BAT=balance_power
4241
4242# Set Intel P-state performance: 0..100 (%).
4243# Limit the max/min P-state to control the power dissipation of the CPU.
4244# Values are stated as a percentage of the available performance.
4245# Requires an Intel Core i processor with intel_pstate driver.
4246#CPU_MIN_PERF_ON_AC=0
4247#CPU_MAX_PERF_ON_AC=100
4248#CPU_MIN_PERF_ON_BAT=0
4249#CPU_MAX_PERF_ON_BAT=30
4250
4251# Set the CPU "turbo boost" feature: 0=disable, 1=allow
4252# Requires an Intel Core i processor.
4253# Important:
4254# - This may conflict with your distribution's governor settings
4255# - A value of 1 does *not* activate boosting, it just allows it
4256#CPU_BOOST_ON_AC=1
4257#CPU_BOOST_ON_BAT=0
4258
4259# Minimize number of used CPU cores/hyper-threads under light load conditions:
4260# 0=disable, 1=enable.
4261SCHED_POWERSAVE_ON_AC=0
4262SCHED_POWERSAVE_ON_BAT=1
4263
4264# Kernel NMI Watchdog:
4265# 0=disable (default, saves power), 1=enable (for kernel debugging only).
4266NMI_WATCHDOG=0
4267
4268# Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
4269# Frequency voltage pairs are written to:
4270# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
4271# CAUTION: only use this, if you thoroughly understand what you are doing!
4272#PHC_CONTROLS="F:V F:V F:V F:V"
4273
4274# Set CPU performance versus energy savings policy:
4275# performance, balance-performance, default, balance-power, power.
4276# Values are given in order of increasing power saving.
4277# Requires kernel module msr and x86_energy_perf_policy from linux-tools.
4278ENERGY_PERF_POLICY_ON_AC=performance
4279ENERGY_PERF_POLICY_ON_BAT=balance-power
4280
4281# Disk devices; separate multiple devices with spaces (default: sda).
4282# Devices can be specified by disk ID also (lookup with: tlp diskid).
4283DISK_DEVICES="sda sdb"
4284
4285# Disk advanced power management level: 1..254, 255 (max saving, min, off).
4286# Levels 1..127 may spin down the disk; 255 allowable on most drives.
4287# Separate values for multiple disks with spaces. Use the special value 'keep'
4288# to keep the hardware default for the particular disk.
4289DISK_APM_LEVEL_ON_AC="254 254"
4290DISK_APM_LEVEL_ON_BAT="128 128"
4291
4292# Hard disk spin down timeout:
4293# 0: spin down disabled
4294# 1..240: timeouts from 5s to 20min (in units of 5s)
4295# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
4296# See 'man hdparm' for details.
4297# Separate values for multiple disks with spaces. Use the special value 'keep'
4298# to keep the hardware default for the particular disk.
4299#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
4300#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
4301
4302# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
4303# Separate values for multiple disks with spaces. Use the special value 'keep'
4304# to keep the kernel default scheduler for the particular disk.
4305#DISK_IOSCHED="cfq cfq"
4306
4307# AHCI link power management (ALPM) for disk devices:
4308# min_power, med_power_with_dipm(*), medium_power, max_performance.
4309# (*) Kernel >= 4.15 required, then recommended.
4310# Multiple values separated with spaces are tried sequentially until success.
4311SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
4312SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
4313
4314# Exclude host devices from AHCI link power management.
4315# Separate multiple hosts with spaces.
4316#SATA_LINKPWR_BLACKLIST="host1"
4317
4318# Runtime Power Management for AHCI host and disks devices:
4319# on=disable, auto=enable.
4320# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
4321#AHCI_RUNTIME_PM_ON_AC=on
4322#AHCI_RUNTIME_PM_ON_BAT=on
4323
4324# Seconds of inactivity before disk is suspended.
4325AHCI_RUNTIME_PM_TIMEOUT=15
4326
4327# PCI Express Active State Power Management (PCIe ASPM):
4328# default, performance, powersave.
4329PCIE_ASPM_ON_AC=performance
4330PCIE_ASPM_ON_BAT=powersave
4331
4332# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
4333# auto = mid on BAT, high on AC; default = use hardware defaults.
4334RADEON_POWER_PROFILE_ON_AC=high
4335RADEON_POWER_PROFILE_ON_BAT=low
4336
4337# Radeon dynamic power management method (DPM): battery, performance.
4338RADEON_DPM_STATE_ON_AC=performance
4339RADEON_DPM_STATE_ON_BAT=battery
4340
4341# Radeon DPM performance level: auto, low, high; auto is recommended.
4342RADEON_DPM_PERF_LEVEL_ON_AC=auto
4343RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4344
4345# WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4346WIFI_PWR_ON_AC=off
4347WIFI_PWR_ON_BAT=on
4348
4349# Disable wake on LAN: Y/N.
4350WOL_DISABLE=Y
4351
4352# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4353# A value of 0 disables, >=1 enables power saving (recommended: 1).
4354SOUND_POWER_SAVE_ON_AC=0
4355SOUND_POWER_SAVE_ON_BAT=0
4356
4357# Disable controller too (HDA only): Y/N.
4358SOUND_POWER_SAVE_CONTROLLER=N
4359
4360# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4361# Drive can be powered on again by releasing (and reinserting) the eject lever
4362# or by pressing the disc eject button on newer models.
4363# Note: an UltraBay/MediaBay hard disk is never powered off.
4364BAY_POWEROFF_ON_AC=0
4365BAY_POWEROFF_ON_BAT=0
4366# Optical drive device to power off (default sr0).
4367BAY_DEVICE="sr0"
4368
4369# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4370RUNTIME_PM_ON_AC=on
4371RUNTIME_PM_ON_BAT=auto
4372
4373# Exclude PCI(e) device adresses the following list from Runtime PM
4374# (separate with spaces). Use lspci to get the adresses (1st column).
4375#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4376
4377# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4378# Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4379# prevents accidential power-on of dGPU in hybrid graphics setups.
4380# Use "" to disable the feature completely.
4381# Separate multiple drivers with spaces.
4382#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4383
4384# Set to 0 to disable, 1 to enable USB autosuspend feature.
4385USB_AUTOSUSPEND=1
4386
4387# Exclude listed devices from USB autosuspend (separate with spaces).
4388# Use lsusb to get the ids.
4389# Note: input devices (usbhid) are excluded automatically
4390#USB_BLACKLIST="1111:2222 3333:4444"
4391
4392# Bluetooth devices are excluded from USB autosuspend:
4393# 0=do not exclude, 1=exclude.
4394USB_BLACKLIST_BTUSB=0
4395
4396# Phone devices are excluded from USB autosuspend:
4397# 0=do not exclude, 1=exclude (enable charging).
4398USB_BLACKLIST_PHONE=0
4399
4400# Printers are excluded from USB autosuspend:
4401# 0=do not exclude, 1=exclude.
4402USB_BLACKLIST_PRINTER=1
4403
4404# WWAN devices are excluded from USB autosuspend:
4405# 0=do not exclude, 1=exclude.
4406USB_BLACKLIST_WWAN=1
4407
4408# Include listed devices into USB autosuspend even if already excluded
4409# by the blacklists above (separate with spaces).
4410# Use lsusb to get the ids.
4411#USB_WHITELIST="1111:2222 3333:4444"
4412
4413# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4414# (workaround for USB devices that cause shutdown problems).
4415#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4416
4417# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4418# on system startup: 0=disable, 1=enable.
4419# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4420# are ignored when this is enabled!
4421#RESTORE_DEVICE_STATE_ON_STARTUP=0
4422RESTORE_DEVICE_STATE_ON_STARTUP=0
4423
4424# Radio devices to disable on startup: bluetooth, wifi, wwan.
4425# Separate multiple devices with spaces.
4426#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
4427DEVICES_TO_DISABLE_ON_STARTUP="bluetooth"
4428
4429# Radio devices to enable on startup: bluetooth, wifi, wwan.
4430# Separate multiple devices with spaces.
4431#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4432
4433# Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4434# (workaround for devices that are blocking shutdown).
4435#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4436
4437# Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4438# (to prevent other operating systems from missing radios).
4439#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4440
4441# Radio devices to enable on AC: bluetooth, wifi, wwan.
4442#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4443
4444# Radio devices to disable on battery: bluetooth, wifi, wwan.
4445#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4446
4447# Radio devices to disable on battery when not in use (not connected):
4448# bluetooth, wifi, wwan.
4449#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4450
4451# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4452# required). Charging starts when the remaining capacity falls below the
4453# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4454# Main / Internal battery (values in %)
4455#START_CHARGE_THRESH_BAT0=75
4456#STOP_CHARGE_THRESH_BAT0=80
4457# Ultrabay / Slice / Replaceable battery (values in %)
4458#START_CHARGE_THRESH_BAT1=75
4459#STOP_CHARGE_THRESH_BAT1=80
4460
4461# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4462#RESTORE_THRESHOLDS_ON_BAT=1
4463
4464# ------------------------------------------------------------------------------
4465# tlp-rdw - Parameters for the radio device wizard
4466# Possible devices: bluetooth, wifi, wwan.
4467
4468# Hints:
4469# - Parameters are disabled by default, remove the leading # to enable them
4470# - Separate multiple radio devices with spaces
4471
4472# Radio devices to disable on connect.
4473#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4474#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4475#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4476
4477# Radio devices to enable on disconnect.
4478#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4479#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4480#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4481
4482# Radio devices to enable/disable when docked.
4483#DEVICES_TO_ENABLE_ON_DOCK=""
4484#DEVICES_TO_DISABLE_ON_DOCK=""
4485
4486# Radio devices to enable/disable when undocked.
4487#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4488#DEVICES_TO_DISABLE_ON_UNDOCK=""
4489#+end_src
4490
4491*** shemshak
4492
4493#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "shemshak")) "/sudo::/etc/default/tlp")
4494# ------------------------------------------------------------------------------
4495# tlp - Parameters for power saving
4496# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
4497
4498# Hint: some features are disabled by default, remove the leading # to enable
4499# them.
4500
4501# Set to 0 to disable, 1 to enable TLP.
4502TLP_ENABLE=1
4503
4504# Operation mode when no power supply can be detected: AC, BAT.
4505# Concerns some desktop and embedded hardware only.
4506TLP_DEFAULT_MODE=AC
4507
4508# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
4509# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
4510TLP_PERSISTENT_DEFAULT=0
4511
4512# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
4513# Non-zero value enables, zero disables laptop mode.
4514DISK_IDLE_SECS_ON_AC=0
4515DISK_IDLE_SECS_ON_BAT=2
4516
4517# Dirty page values (timeouts in secs).
4518MAX_LOST_WORK_SECS_ON_AC=15
4519MAX_LOST_WORK_SECS_ON_BAT=60
4520
4521# Hint: CPU parameters below are disabled by default, remove the leading #
4522# to enable them, otherwise kernel default values are used.
4523
4524# Select a CPU frequency scaling governor.
4525# Intel Core i processor with intel_pstate driver:
4526# powersave(*), performance.
4527# Older hardware with acpi-cpufreq driver:
4528# ondemand(*), powersave, performance, conservative, schedutil.
4529# (*) is recommended.
4530# Hint: use tlp-stat -p to show the active driver and available governors.
4531# Important:
4532# powersave for intel_pstate and ondemand for acpi-cpufreq are power
4533# efficient for *almost all* workloads and therefore kernel and most
4534# distributions have chosen them as defaults. If you still want to change,
4535# you should know what you're doing! You *must* disable your distribution's
4536# governor settings or conflicts will occur.
4537#CPU_SCALING_GOVERNOR_ON_AC=powersave
4538#CPU_SCALING_GOVERNOR_ON_BAT=powersave
4539
4540# Set the min/max frequency available for the scaling governor.
4541# Possible values strongly depend on your CPU. For available frequencies see
4542# the output of tlp-stat -p.
4543#CPU_SCALING_MIN_FREQ_ON_AC=0
4544#CPU_SCALING_MAX_FREQ_ON_AC=0
4545#CPU_SCALING_MIN_FREQ_ON_BAT=0
4546#CPU_SCALING_MAX_FREQ_ON_BAT=0
4547
4548# Set energy performance hints (HWP) for Intel P-state governor:
4549# performance, balance_performance, default, balance_power, power
4550# Values are given in order of increasing power saving.
4551# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
4552CPU_HWP_ON_AC=balance_performance
4553CPU_HWP_ON_BAT=balance_power
4554
4555# Set Intel P-state performance: 0..100 (%).
4556# Limit the max/min P-state to control the power dissipation of the CPU.
4557# Values are stated as a percentage of the available performance.
4558# Requires an Intel Core i processor with intel_pstate driver.
4559#CPU_MIN_PERF_ON_AC=0
4560#CPU_MAX_PERF_ON_AC=100
4561#CPU_MIN_PERF_ON_BAT=0
4562#CPU_MAX_PERF_ON_BAT=30
4563
4564# Set the CPU "turbo boost" feature: 0=disable, 1=allow
4565# Requires an Intel Core i processor.
4566# Important:
4567# - This may conflict with your distribution's governor settings
4568# - A value of 1 does *not* activate boosting, it just allows it
4569#CPU_BOOST_ON_AC=1
4570#CPU_BOOST_ON_BAT=0
4571
4572# Minimize number of used CPU cores/hyper-threads under light load conditions:
4573# 0=disable, 1=enable.
4574SCHED_POWERSAVE_ON_AC=0
4575SCHED_POWERSAVE_ON_BAT=1
4576
4577# Kernel NMI Watchdog:
4578# 0=disable (default, saves power), 1=enable (for kernel debugging only).
4579NMI_WATCHDOG=0
4580
4581# Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
4582# Frequency voltage pairs are written to:
4583# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
4584# CAUTION: only use this, if you thoroughly understand what you are doing!
4585#PHC_CONTROLS="F:V F:V F:V F:V"
4586
4587# Set CPU performance versus energy savings policy:
4588# performance, balance-performance, default, balance-power, power.
4589# Values are given in order of increasing power saving.
4590# Requires kernel module msr and x86_energy_perf_policy from linux-tools.
4591ENERGY_PERF_POLICY_ON_AC=performance
4592ENERGY_PERF_POLICY_ON_BAT=balance-power
4593
4594# Disk devices; separate multiple devices with spaces (default: sda).
4595# Devices can be specified by disk ID also (lookup with: tlp diskid).
4596DISK_DEVICES="sda sdb"
4597
4598# Disk advanced power management level: 1..254, 255 (max saving, min, off).
4599# Levels 1..127 may spin down the disk; 255 allowable on most drives.
4600# Separate values for multiple disks with spaces. Use the special value 'keep'
4601# to keep the hardware default for the particular disk.
4602DISK_APM_LEVEL_ON_AC="254 254"
4603DISK_APM_LEVEL_ON_BAT="128 128"
4604
4605# Hard disk spin down timeout:
4606# 0: spin down disabled
4607# 1..240: timeouts from 5s to 20min (in units of 5s)
4608# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
4609# See 'man hdparm' for details.
4610# Separate values for multiple disks with spaces. Use the special value 'keep'
4611# to keep the hardware default for the particular disk.
4612#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
4613#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
4614
4615# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
4616# Separate values for multiple disks with spaces. Use the special value 'keep'
4617# to keep the kernel default scheduler for the particular disk.
4618#DISK_IOSCHED="cfq cfq"
4619
4620# AHCI link power management (ALPM) for disk devices:
4621# min_power, med_power_with_dipm(*), medium_power, max_performance.
4622# (*) Kernel >= 4.15 required, then recommended.
4623# Multiple values separated with spaces are tried sequentially until success.
4624SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
4625SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
4626
4627# Exclude host devices from AHCI link power management.
4628# Separate multiple hosts with spaces.
4629#SATA_LINKPWR_BLACKLIST="host1"
4630
4631# Runtime Power Management for AHCI host and disks devices:
4632# on=disable, auto=enable.
4633# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
4634#AHCI_RUNTIME_PM_ON_AC=on
4635#AHCI_RUNTIME_PM_ON_BAT=on
4636
4637# Seconds of inactivity before disk is suspended.
4638AHCI_RUNTIME_PM_TIMEOUT=15
4639
4640# PCI Express Active State Power Management (PCIe ASPM):
4641# default, performance, powersave.
4642PCIE_ASPM_ON_AC=performance
4643PCIE_ASPM_ON_BAT=powersave
4644
4645# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
4646# auto = mid on BAT, high on AC; default = use hardware defaults.
4647RADEON_POWER_PROFILE_ON_AC=high
4648RADEON_POWER_PROFILE_ON_BAT=low
4649
4650# Radeon dynamic power management method (DPM): battery, performance.
4651RADEON_DPM_STATE_ON_AC=performance
4652RADEON_DPM_STATE_ON_BAT=battery
4653
4654# Radeon DPM performance level: auto, low, high; auto is recommended.
4655RADEON_DPM_PERF_LEVEL_ON_AC=auto
4656RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4657
4658# WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4659WIFI_PWR_ON_AC=off
4660WIFI_PWR_ON_BAT=on
4661
4662# Disable wake on LAN: Y/N.
4663WOL_DISABLE=Y
4664
4665# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4666# A value of 0 disables, >=1 enables power saving (recommended: 1).
4667SOUND_POWER_SAVE_ON_AC=0
4668SOUND_POWER_SAVE_ON_BAT=0
4669
4670# Disable controller too (HDA only): Y/N.
4671SOUND_POWER_SAVE_CONTROLLER=N
4672
4673# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4674# Drive can be powered on again by releasing (and reinserting) the eject lever
4675# or by pressing the disc eject button on newer models.
4676# Note: an UltraBay/MediaBay hard disk is never powered off.
4677BAY_POWEROFF_ON_AC=0
4678BAY_POWEROFF_ON_BAT=0
4679# Optical drive device to power off (default sr0).
4680BAY_DEVICE="sr0"
4681
4682# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4683RUNTIME_PM_ON_AC=on
4684RUNTIME_PM_ON_BAT=auto
4685
4686# Exclude PCI(e) device adresses the following list from Runtime PM
4687# (separate with spaces). Use lspci to get the adresses (1st column).
4688#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4689RUNTIME_PM_BLACKLIST="01:00.0"
4690
4691# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4692# Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4693# prevents accidential power-on of dGPU in hybrid graphics setups.
4694# Use "" to disable the feature completely.
4695# Separate multiple drivers with spaces.
4696#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4697
4698# Set to 0 to disable, 1 to enable USB autosuspend feature.
4699USB_AUTOSUSPEND=1
4700
4701# Exclude listed devices from USB autosuspend (separate with spaces).
4702# Use lsusb to get the ids.
4703# Note: input devices (usbhid) are excluded automatically
4704#USB_BLACKLIST="1111:2222 3333:4444"
4705
4706# Bluetooth devices are excluded from USB autosuspend:
4707# 0=do not exclude, 1=exclude.
4708USB_BLACKLIST_BTUSB=0
4709
4710# Phone devices are excluded from USB autosuspend:
4711# 0=do not exclude, 1=exclude (enable charging).
4712USB_BLACKLIST_PHONE=0
4713
4714# Printers are excluded from USB autosuspend:
4715# 0=do not exclude, 1=exclude.
4716USB_BLACKLIST_PRINTER=1
4717
4718# WWAN devices are excluded from USB autosuspend:
4719# 0=do not exclude, 1=exclude.
4720USB_BLACKLIST_WWAN=1
4721
4722# Include listed devices into USB autosuspend even if already excluded
4723# by the blacklists above (separate with spaces).
4724# Use lsusb to get the ids.
4725#USB_WHITELIST="1111:2222 3333:4444"
4726
4727# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4728# (workaround for USB devices that cause shutdown problems).
4729#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4730
4731# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4732# on system startup: 0=disable, 1=enable.
4733# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4734# are ignored when this is enabled!
4735#RESTORE_DEVICE_STATE_ON_STARTUP=0
4736RESTORE_DEVICE_STATE_ON_STARTUP=1
4737
4738# Radio devices to disable on startup: bluetooth, wifi, wwan.
4739# Separate multiple devices with spaces.
4740#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
4741
4742# Radio devices to enable on startup: bluetooth, wifi, wwan.
4743# Separate multiple devices with spaces.
4744#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4745
4746# Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4747# (workaround for devices that are blocking shutdown).
4748#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4749
4750# Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4751# (to prevent other operating systems from missing radios).
4752#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4753
4754# Radio devices to enable on AC: bluetooth, wifi, wwan.
4755#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4756
4757# Radio devices to disable on battery: bluetooth, wifi, wwan.
4758#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4759
4760# Radio devices to disable on battery when not in use (not connected):
4761# bluetooth, wifi, wwan.
4762#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4763
4764# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4765# required). Charging starts when the remaining capacity falls below the
4766# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4767# Main / Internal battery (values in %)
4768#START_CHARGE_THRESH_BAT0=75
4769#STOP_CHARGE_THRESH_BAT0=80
4770# Ultrabay / Slice / Replaceable battery (values in %)
4771#START_CHARGE_THRESH_BAT1=75
4772#STOP_CHARGE_THRESH_BAT1=80
4773
4774# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4775#RESTORE_THRESHOLDS_ON_BAT=1
4776
4777# ------------------------------------------------------------------------------
4778# tlp-rdw - Parameters for the radio device wizard
4779# Possible devices: bluetooth, wifi, wwan.
4780
4781# Hints:
4782# - Parameters are disabled by default, remove the leading # to enable them
4783# - Separate multiple radio devices with spaces
4784
4785# Radio devices to disable on connect.
4786#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4787#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4788#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4789
4790# Radio devices to enable on disconnect.
4791#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4792#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4793#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4794
4795# Radio devices to enable/disable when docked.
4796#DEVICES_TO_ENABLE_ON_DOCK=""
4797#DEVICES_TO_DISABLE_ON_DOCK=""
4798
4799# Radio devices to enable/disable when undocked.
4800#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4801#DEVICES_TO_DISABLE_ON_UNDOCK=""
4802#+end_src
4803
4804** X
4805
4806*** xprofile
4807:PROPERTIES:
4808:header-args+: :tangle ~/.xprofile
4809:END:
4810
4811=~/.xprofile= is similar in style to =~/.xinitrc=, but on the
4812contrary, it's automatically sourced by LightDM, my display manager of
4813choice.
4814
4815#+begin_src sh :tangle no
4816xset -b # disable bell
4817xset r rate 200 45 # repeat delay (ms) and rate (repeats/sec)
4818
4819# setxkbmap -option compose:ralt
4820
4821setxkbmap -option ctrl:nocaps # turn capslock into control
4822setxkbmap -option altwin:swap_alt_win # swap alt and super
4823
4824if [ $(hostname) = "plasma" ]
4825then
4826 setxkbmap -option ctrl:rctrl_ralt # turn right control into right alt
4827fi
4828
4829if [ $(hostname) = "enigma" ]
4830then
4831 xmodmap -e "keycode 135 = Alt_R" # remap menu key to alt
4832fi
4833
4834light -Scrs "intel_backlight" 2
4835
4836source $HOME/.zprofile
4837
4838export _JAVA_AWT_WM_NONREPARENTING=1
4839export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4840
4841if [ $(hostname) = "plasma" ]
4842then
4843 unlock-def-gk.py &
4844fi
4845
4846bspwm &
4847#+end_src
4848
4849*** X resources
4850
4851**** Xresources
4852:PROPERTIES:
4853:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
4854:END:
4855
4856#+begin_src conf-xdefaults
4857#include ".Xresources.d/fonts"
4858! #include ".Xresources.d/colors"
4859#include ".Xresources.d/emacs"
4860#include ".Xresources.d/rxvt-unicode"
4861#+end_src
4862
4863**** Xresources.d
4864
4865***** fonts
4866:PROPERTIES:
4867:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
4868:END:
4869
4870#+begin_src conf-xdefaults
4871Xft.lcdfilter: lcddefault
4872Xft.antialias: true
4873Xft.autohint: 0
4874Xft.hinting: true
4875Xft.hintstyle: hintslight
4876! Xft.hintstyle: hintfull
4877Xft.rgba: rgb
4878Xft.dpi: 96
4879#+end_src
4880
4881***** colors
4882:PROPERTIES:
4883:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
4884:END:
4885
4886#+begin_src conf-xdefaults :tangle no
4887#include "gruvbox-light.xresources"
4888! #include "gruvbox-dark.xresources"
4889#include "gruvbox-urxvt256.xresources"
4890#+end_src
4891
4892#+begin_src conf-xdefaults :tangle no
4893! -----------------------------------------------------------------------------
4894! File: gruvbox-light.xresources
4895! Description: Retro groove colorscheme generalized
4896! Author: morhetz <morhetz@gmail.com>
4897! Source: https://github.com/morhetz/gruvbox-generalized
4898! Last Modified: 6 Sep 2014
4899! -----------------------------------------------------------------------------
4900
4901! hard contrast: *background: #f9f5d7
4902*background: #fbf1c7
4903! soft contrast: *background: #f2e5bc
4904*foreground: #3c3836
4905! Black + DarkGrey
4906*color0: #fdf4c1
4907*color8: #928374
4908! DarkRed + Red
4909*color1: #cc241d
4910*color9: #9d0006
4911! DarkGreen + Green
4912*color2: #98971a
4913*color10: #79740e
4914! DarkYellow + Yellow
4915*color3: #d79921
4916*color11: #b57614
4917! DarkBlue + Blue
4918*color4: #458588
4919*color12: #076678
4920! DarkMagenta + Magenta
4921*color5: #b16286
4922*color13: #8f3f71
4923! DarkCyan + Cyan
4924*color6: #689d6a
4925*color14: #427b58
4926! LightGrey + White
4927*color7: #7c6f64
4928*color15: #3c3836
4929#+end_src
4930
4931#+begin_src conf-xdefaults :tangle no
4932! -----------------------------------------------------------------------------
4933! File: gruvbox-dark.xresources
4934! Description: Retro groove colorscheme generalized
4935! Author: morhetz <morhetz@gmail.com>
4936! Source: https://github.com/morhetz/gruvbox-generalized
4937! Last Modified: 6 Sep 2014
4938! -----------------------------------------------------------------------------
4939
4940! hard contrast: *background: #1d2021
4941*background: #282828
4942! soft contrast: *background: #32302f
4943*foreground: #ebdbb2
4944! Black + DarkGrey
4945*color0: #282828
4946*color8: #928374
4947! DarkRed + Red
4948*color1: #cc241d
4949*color9: #fb4934
4950! DarkGreen + Green
4951*color2: #98971a
4952*color10: #b8bb26
4953! DarkYellow + Yellow
4954*color3: #d79921
4955*color11: #fabd2f
4956! DarkBlue + Blue
4957*color4: #458588
4958*color12: #83a598
4959! DarkMagenta + Magenta
4960*color5: #b16286
4961*color13: #d3869b
4962! DarkCyan + Cyan
4963*color6: #689d6a
4964*color14: #8ec07c
4965! LightGrey + White
4966*color7: #a89984
4967*color15: #ebdbb2
4968#+end_src
4969
4970#+begin_src conf-xdefaults :tangle no
4971! -----------------------------------------------------------------------------
4972! File: gruvbox-urxvt256.xresources
4973! Description: Retro groove colorscheme generalized
4974! Author: morhetz <morhetz@gmail.com>
4975! Source: https://github.com/morhetz/gruvbox-generalized
4976! Last Modified: 13 Dec 2013
4977! -----------------------------------------------------------------------------
4978
4979URxvt.color24: #076678
4980URxvt.color66: #427b58
4981URxvt.color88: #9d0006
4982URxvt.color96: #8f3f71
4983URxvt.color100: #79740e
4984URxvt.color108: #8ec07c
4985URxvt.color109: #83a598
4986URxvt.color130: #af3a03
4987URxvt.color136: #b57614
4988URxvt.color142: #b8bb26
4989URxvt.color167: #fb4934
4990URxvt.color175: #d3869b
4991URxvt.color208: #fe8019
4992URxvt.color214: #fabd2f
4993URxvt.color223: #ebdbb2
4994URxvt.color228: #f2e5bc
4995URxvt.color229: #fbf1c7
4996URxvt.color230: #f9f5d7
4997URxvt.color234: #1d2021
4998URxvt.color235: #282828
4999URxvt.color236: #32302f
5000URxvt.color237: #3c3836
5001URxvt.color239: #504945
5002URxvt.color241: #665c54
5003URxvt.color243: #7c6f64
5004URxvt.color244: #928374
5005URxvt.color245: #928374
5006URxvt.color246: #a89984
5007URxvt.color248: #bdae93
5008URxvt.color250: #d5c4a1
5009#+end_src
5010
5011***** emacs
5012:PROPERTIES:
5013:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
5014:END:
5015
5016#+begin_src conf-xdefaults
5017Emacs.menuBar: off
5018Emacs.toolBar: off
5019Emacs.verticalScrollBars: off
5020Emacs.cursorBlink: off
5021Emacs.FontBackend: xft,x
5022! Emacs.font: Ubuntu Mono-12
5023! Emacs.font: Triplicate T4C-11
5024! Emacs.font: Ubuntu Mono-10.5
5025! Emacs.font: Ubuntu Mono-12
5026! Emacs.font: Iosevka-11
5027
5028! Emacs.font: Fira Mono:size=15
5029! Emacs.font: DejaVu Sans Mono:size=15
5030! Emacs.font: Inconsolata:size=17
5031! Emacs.font: Inconsolata:size=16
5032! Emacs.font: Inconsolata LGC:size=14
5033! Emacs.font: Source Code Pro Medium-10.5
5034Emacs.font: Source Code Pro:size=14
5035! Emacs.font: Ubuntu Mono:size=16
5036! Emacs.font: Iosevka:size=16
5037#+end_src
5038
5039***** rxvt-unicode
5040:PROPERTIES:
5041:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
5042:END:
5043
5044#+begin_src conf-xdefaults
5045! Font
5046URxvt.font: xft:source code pro:pixelsize=14:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
5047URxvt.boldFont: xft:source code pro semibold:pixelsize=14:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
5048URxvt.italicFont: xft:source code pro italic:pixelsize=14:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
5049URxvt.bolditalicFont: xft:source code pro semibold italic:pixelsize=14:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
5050
5051URxvt.xftAntialias: true
5052URxvt.letterSpace: 0
5053
5054URxvt.depth: 0
5055URxvt.loginShell: true
5056URxvt.saveLines: 100000
5057URxvt.internalBorder: 3
5058URxvt.lineSpace: 0
5059URxvt.scrollBar: false
5060URxvt.scrollStyle: rxvt
5061URxvt*scrollTtyOutput: false
5062URxvt*scrollWithBuffer: true
5063URxvt*scrollTtyKeypress: true
5064URxvt.keysym.Shift-Up: command:\033]720;1\007
5065URxvt.keysym.Shift-Down: command:\033]721;1\007
5066
5067URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select
5068URxvt.url-select.launcher: firefox
5069URxvt.url-select.underline: true
5070URxvt.keysym.M-u: perl:url-select:select_next
5071URxvt.keysym.M-Escape: perl:keyboard-select:activate
5072URxvt.keysym.M-s: perl:keyboard-select:search
5073URxvt.url-launcher: /usr/bin/firefox
5074URxvt.matcher.button: 1
5075URxvt.iso14755: false
5076URxvt.iso14755_53: false
5077URxvt.keysym.M-c: perl:clipboard:copy
5078URxvt.keysym.M-v: perl:clipboard:paste
5079URxvt.keysym.C-A-V: perl:clipboard:paste_escaped
5080URxvt.keysym.C-Up: font-size:increase
5081URxvt.keysym.C-Down: font-size:decrease
5082URxvt.keysym.C-S-Up: font-size:incglobal
5083URxvt.keysym.C-S-Down: font-size:decglobal
5084URxvt.keysym.C-equal: font-size:reset
5085!URxvt.keysym.C-question: font-size:show
5086
5087URxvt.iconFile: /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
5088
5089!urxvt*foreground: white
5090!urxvt*background: black
5091
5092!*color0: #2E3436
5093!*color1: #a40000
5094!*color2: #4E9A06
5095!*color3: #C4A000
5096!*color4: #3465A4
5097!*color5: #75507B
5098!*color6: #ce5c00
5099!*color7: #babdb9
5100!*color8: #555753
5101!*color9: #EF2929
5102!*color10: #8AE234
5103!*color11: #FCE94F
5104!*color12: #729FCF
5105!*color13: #AD7FA8
5106!*color14: #fcaf3e
5107!*color15: #EEEEEC
5108
5109!URxvt.foreground: #C8C8C8
5110!URxvt.background: #FFFFFF
5111
5112!! black
5113!*color0: #2E3436
5114!*color8: #555753
5115!! red
5116!*color1: #a40000
5117!*color9: #EF2929
5118!! green
5119!*color2: #4E9A06
5120!*color10: #8AE234
5121!! yellow
5122!*color3: #C4A000
5123!*color11: #FCE94F
5124!! blue
5125!*color4: #3465A4
5126!*color12: #729FCF
5127!! purple
5128!*color5: #75507B
5129!*color13: #AD7FA8
5130!! orange (replaces cyan)
5131!*color6: #ce5c00
5132!*color14: #fcaf3e
5133!! white
5134!*color7: #babdb9
5135!*color15: #EEEEEC
5136
5137! Tango colour theme for rxvt-unicode
5138URxvt.background: #FFFFFF
5139URxvt.foreground: #000000
5140
5141! Black
5142URxvt.color0: #2E3436
5143URxvt.color8: #757773
5144
5145! Red
5146URxvt.color1: #CC0000
5147URxvt.color9: #EF2929
5148
5149! Green
5150URxvt.color2: #4E9A06
5151URxvt.color10: #8AE234
5152
5153! Yellow
5154URxvt.color3: #C4A000
5155URxvt.color11: #FCE94F
5156
5157! Blue
5158URxvt.color4: #3465A4
5159URxvt.color12: #729FCF
5160
5161! Magenta
5162URxvt.color5: #75507B
5163URxvt.color13: #AD7FA8
5164
5165!! Cyan
5166!URxvt.color6: #06989A
5167!URxvt.color14: #34E2E2
5168! orange (replaces cyan)
5169,*color6: #ce5c00
5170,*color14: #fcaf3e
5171
5172! White
5173URxvt.color7: #D3D7CF
5174URxvt.color15: #EEEEEC
5175#+end_src
5176
5177*** xkb us_ab keyboard layout
5178
5179#+begin_src conf :tangle "/sudo::/usr/share/X11/xkb/symbols/us_ab" :comments none
5180default partial alphanumeric_keys
5181xkb_symbols "us_ab" {
5182 include "us(basic)"
5183 name[Group1]= "English (US)(aminb)";
5184
5185 key <MENU> { [ Alt_R ] };
5186};
5187#+end_src
5188
5189** XDG
5190:PROPERTIES:
5191:header-args+: :tangle ~/.config/user-dirs.dirs
5192:END:
5193
5194#+begin_src conf
5195XDG_DESKTOP_DIR="$HOME/Desktop"
5196XDG_DOCUMENTS_DIR="$HOME/usr/docs"
5197XDG_DOWNLOAD_DIR="$HOME/usr/dls"
5198XDG_MUSIC_DIR="$HOME/usr/music"
5199XDG_PICTURES_DIR="$HOME/usr/pics"
5200XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
5201XDG_TEMPLATES_DIR="$HOME/usr/Templates"
5202XDG_VIDEOS_DIR="$HOME/usr/vids"
5203#+end_src
5204
5205** Zathura
5206:PROPERTIES:
5207:header-args+: :tangle ~/.config/zathura/zathurarc
5208:END:
5209
5210#+begin_src conf
5211set smooth-scroll true
5212set selection-clipboard clipboard
5213set zoom-step 05
5214set default-bg "#272727"
5215set statusbar-bg "#272727"
5216set inputbar-bg "#373737"
5217#+end_src
5218
5219** Zsh
5220
5221My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
5222[[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
5223installed.
5224
5225*** zimrc
5226:PROPERTIES:
5227:header-args+: :tangle ~/.zimrc
5228:END:
5229
5230#+begin_src sh
5231
5232
5233#################
5234# CORE SETTINGS #
5235#################
5236
5237#
5238# Zim settings
5239#
5240
5241# Select what modules you would like enabled.
5242# The second line of modules may depend on options set by modules in the first
5243# line. These dependencies are noted on the respective module's README.md.
5244zmodules=(directory environment git git-info history input ssh utility custom \
5245 syntax-highlighting history-substring-search prompt completion)
5246
5247
5248###################
5249# MODULE SETTINGS #
5250###################
5251
5252#
5253# Prompt
5254#
5255
5256# Set your desired prompt here
5257zprompt_theme='pure'
5258#PURE_PROMPT_SYMBOL=λ
5259#PURE_PROMPT_SYMBOL=δ
5260PURE_PROMPT_SYMBOL=➜
5261
5262#
5263# Completion
5264#
5265
5266# set an optional host-specific filename for the completion cache file
5267# if none is provided, the default '.zcompdump' is used.
5268#zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
5269
5270#
5271# Utility
5272#
5273
5274# Uncomment to enable command correction prompts
5275# See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
5276setopt CORRECT
5277
5278#
5279# Environment
5280#
5281
5282# Set the string below to the desired terminal title format string.
5283# The terminal title is redrawn upon directory change, however, variables like
5284# ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
5285# http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
5286# The example below uses the following format: 'username@host:/current/directory'
5287ztermtitle='%n@%m:%~'
5288
5289#
5290# Input
5291#
5292
5293# Uncomment to enable double-dot expansion.
5294# This appends '../' to your input for each '.' you type after an initial '..'
5295#zdouble_dot_expand='true'
5296
5297#
5298# Syntax-Highlighting
5299#
5300
5301# This determines what highlighters will be used with the syntax-highlighting module.
5302# Documentation of the highlighters can be found here:
5303# https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
5304# For (u)rxvt, termite and gnome-terminal users,
5305# removing the 'cursor' highlighter will fix the disappearing cursor problem
5306#zhighlighters=(main brackets cursor)
5307zhighlighters=(main brackets pattern)
5308
5309
5310#
5311# SSH
5312#
5313
5314# Load these ssh identities with the ssh module
5315zssh_ids=(id_ed25519_bandali)
5316
5317
5318#
5319# Pacman
5320#
5321
5322# Set (optional) pacman front-end.
5323zpacman_frontend='yay'
5324
5325# Load any helper scripts as defined here
5326#zpacman_helper=(aur)
5327#+end_src
5328
5329*** zlogin
5330:PROPERTIES:
5331:header-args+: :tangle ~/.zlogin
5332:END:
5333
5334#+begin_src sh
5335
5336
5337#
5338# User configuration sourced by login shells
5339#
5340
5341# Initialize zim
5342[[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
5343#+end_src
5344
5345*** zprofile
5346:PROPERTIES:
5347:header-args+: :tangle ~/.zprofile
5348:END:
5349
5350#+begin_src sh
5351#PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
5352#PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
5353export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
5354export XDG_CONFIG_HOME=$HOME/.config
5355export XDG_DATA_HOME=$HOME/.local/share
5356export XDG_DATA_DIRS=/usr/local/share:/usr/share
5357export MAILDIR="$HOME/mail"
5358export CVS_RSH=ssh
5359#export MATHMODELS=$HOME/src/eiffel/mathmodels
5360#export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
5361#export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
5362
5363# Eiffel2Java stuff
5364#export JAVA_HOME=/usr/lib/jvm/default
5365#export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
5366#export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
5367#export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
5368
5369#export PATH="$HOME/usr/build/pvs:$PATH"
5370#export SBCLISP_HOME=/usr/share/sbcl-source
5371#export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
5372
5373export MOZ_USE_XINPUT2=1 # precise scrolling in firefox
5374
5375#export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
5376#export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
5377
5378export NIXPKGS=$HOME/src/git/nixpkgs
5379
5380if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
5381#+end_src
5382
5383*** zshenv
5384:PROPERTIES:
5385:header-args+: :tangle ~/.zshenv
5386:END:
5387
5388#+begin_src sh
5389# Ensure that a non-login, non-interactive shell has a defined environment.
5390if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
5391 source "${ZDOTDIR:-$HOME}/.zprofile"
5392fi
5393#+end_src
5394
5395*** zshrc
5396:PROPERTIES:
5397:header-args+: :tangle ~/.zshrc
5398:END:
5399
5400#+begin_src sh
5401# Bash-like navigation
5402#export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
5403#export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
5404export WORDCHARS='*?[]~=&;!#$%^(){}<>'
5405#ZLE_SPACE_SUFFIX_CHARS=$'|&'
5406
5407#disable -r time # disable shell reserved word
5408#alias time='time -p' # -p for POSIX output
5409
5410# rehash if last command was pacaur or pacman
5411# (so that zsh picks up changes in $PATH immediately)
5412TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
5413
5414#
5415# User configuration sourced by interactive shells
5416#
5417
5418# Change default zim location
5419export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
5420
5421# Start zim
5422[[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
5423
5424ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
5425#ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
5426
5427setopt globdots
5428
5429source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
5430# source ~/.zsh/zsh-autopair/autopair.zsh
5431
5432
5433### fzf ###
5434
5435source /usr/share/fzf/key-bindings.zsh
5436source /usr/share/fzf/completion.zsh
5437
5438# Accept history selection instead of putting it on
5439# the command line
5440fzf-history-widget-accept() {
5441 fzf-history-widget
5442 zle accept-line
5443}
5444#zle -N fzf-history-widget-accept
5445#bindkey '^R' fzf-history-widget-accept
5446
5447# alt+c preview
5448export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
5449
5450### fzf ###
5451
5452
5453# aliases
5454alias mpv="mpv --ytdl-format mp4"
5455alias mv="mv -iv"
5456alias cp="cp -iv"
5457alias scl=systemctl
5458alias jcl=journalctl
5459alias m="mbsync uwaterloo; mbsync amin"
5460alias best="youtube-dl -f best"
5461alias sd="ssh deb"
5462alias sf="ssh fp"
5463alias sn="ssh nix"
5464
5465aur() {
5466 cd ~/usr/build
5467 git clone https://aur.archlinux.org/${1}.git
5468 cd ${1}
5469}
5470
5471# i-beam cursor
5472echo -e "\033[5 q"
5473#echo -e "\033[6 q"
5474#+end_src
5475
5476* Scripts
5477
5478This section contains various useful scripts and the ones used by the
5479programs above. For instance, =toggle-tablet= for switching to and
5480from tablet mode on my X220T, =toggle-presentation-mode= for toggling
5481Xfce's presentation mode which keeps the screen awake, and
5482=rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
5483exact brightness value.
5484
5485** battery-percentage-time
5486:PROPERTIES:
5487:header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/sh"
5488:END:
5489
5490#+begin_src sh :tangle no
5491dbus_send() {
5492 label=$1
5493 dbus-send --print-reply=literal --system \
5494 --dest=org.freedesktop.UPower \
5495 /org/freedesktop/UPower/devices/battery_BAT0 \
5496 org.freedesktop.DBus.Properties.Get \
5497 string:org.freedesktop.UPower.Device \
5498 string:"${label}" | awk '{print $3}'
5499}
5500
5501perc=$(dbus_send 'Percentage')
5502state=$(dbus_send 'State')
5503
5504if [ "$state" -eq 2 ]; then # Discharging
5505 secs=$(dbus_send 'TimeToEmpty')
5506elif [ "$state" -eq 1 ]; then # Charging
5507 secs=$(dbus_send 'TimeToFull')
5508fi
5509
5510printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60))
5511#+end_src
5512
5513** my-i3status.py
5514:PROPERTIES:
5515:header-args+: :tangle ~/.local/bin/my-i3status.py :shebang "#!/usr/bin/env python2"
5516:END:
5517
5518#+begin_src python :comments none
5519# -*- coding: utf-8 -*-
5520
5521# This script is a simple wrapper which prefixes each i3status line with custom
5522# information. It is based on:
5523# https://github.com/i3/i3status/blob/master/contrib/wrapper.py
5524#
5525# In ~/.i3status.conf, add the following line:
5526# output_format = "i3bar"
5527# in the 'general' section.
5528# Then, in ~/.config/i3/config or ~/.config/sway/config add:
5529# status_command i3status | my-i3status.py
5530# in the 'bar' section. Make sure my-i3status.py is in $PATH.
5531#
5532# © 2012 Valentin Haenel <valentin.haenel@gmx.de>
5533# © 2018 Amin Bandali <bandali@gnu.org>
5534#
5535# This program is free software. It comes without any warranty, to the extent
5536# permitted by applicable law. You can redistribute it and/or modify it under
5537# the terms of the Do What The Fuck You Want To Public License (WTFPL), Version
5538# 2, as published by Sam Hocevar. See http://sam.zoy.org/wtfpl/COPYING for more
5539# details.
5540
5541import sys
5542import json
5543import os
5544
5545def get_nosleep():
5546 """ Return true if ~/.nosleep exists. """
5547 return os.path.isfile(os.path.expanduser("~/.nosleep"))
5548
5549def print_line(message):
5550 """ Non-buffered printing to stdout. """
5551 sys.stdout.write(message + '\n')
5552 sys.stdout.flush()
5553
5554def read_line():
5555 """ Interrupted respecting reader for stdin. """
5556 # try reading a line, removing any extra whitespace
5557 try:
5558 line = sys.stdin.readline().strip()
5559 # i3status sends EOF, or an empty line
5560 if not line:
5561 sys.exit(3)
5562 return line
5563 # exit on ctrl-c
5564 except KeyboardInterrupt:
5565 sys.exit()
5566
5567if __name__ == '__main__':
5568 # Skip the first line which contains the version header.
5569 print_line(read_line())
5570
5571 # The second line contains the start of the infinite array.
5572 print_line(read_line())
5573
5574 while True:
5575 line, prefix = read_line(), ''
5576 # ignore comma at start of lines
5577 if line.startswith(','):
5578 line, prefix = line[1:], ','
5579
5580 if get_nosleep():
5581 j = json.loads(line)
5582 # insert information into the start of the json, but could be anywhere
5583 j.insert(0, {'full_text' : '🖵 ', 'name' : 'nosleep'})
5584 # and echo back new encoded json
5585 print_line(prefix+json.dumps(j))
5586 else:
5587 print_line(prefix+line)
5588#+end_src
5589
5590** rofi-light
5591:PROPERTIES:
5592:header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
5593:END:
5594
5595#+begin_src bash
5596cur=$(light -G)
5597val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 12)
5598[ -n "$val" ] && light -S $val
5599#+end_src
5600
5601** rofi-remmina.py
5602:PROPERTIES:
5603:header-args+: :tangle ~/.local/bin/rofi-remmina.py :shebang "#!/usr/bin/env python2"
5604:END:
5605
5606#+begin_src python
5607import ConfigParser
5608import os
5609from subprocess import Popen, PIPE
5610
5611remmina_dir = os.path.expanduser("~/.local/share/remmina")
5612
5613fdict = dict()
5614
5615for f in os.listdir(remmina_dir):
5616 fp = os.path.join(remmina_dir, f)
5617 c = ConfigParser.ConfigParser()
5618 c.read(fp)
5619 n = c.get('remmina', 'name')
5620 fdict[n] = fp
5621
5622lines = max(min(15, len(fdict)), 1);
5623width = len(max(fdict.keys(), key=len))
5624rofi = Popen(["rofi", "-i", "-dmenu", \
5625 "-l", str(lines), "-width", str(width), \
5626 "-p", "connection"], stdout=PIPE, stdin=PIPE)
5627selected = rofi.communicate("\n" \
5628 .join(fdict.keys()) \
5629 .encode("utf-8"))[0] \
5630 .decode("utf-8") \
5631 .strip()
5632rofi.wait()
5633
5634r = Popen(["remmina", "-c", fdict[selected]])
5635r.wait()
5636#+end_src
5637
5638** s (run sway)
5639:PROPERTIES:
5640:header-args+: :tangle ~/.local/bin/s :shebang "#!/bin/bash"
5641:END:
5642
5643#+begin_src bash
5644export _JAVA_AWT_WM_NONREPARENTING=1
5645export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
5646light -Nr 2
5647source $HOME/.zprofile
5648sway
5649#+end_src
5650
5651** sway-ws-util
5652:PROPERTIES:
5653:header-args+: :tangle ~/.local/bin/sway-ws-util :shebang "#!/bin/bash"
5654:END:
5655
5656#+begin_src bash
5657curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name')
5658[[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1))
5659[[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1))
5660dest_ws=-1
5661op=-1
5662
5663if [ "$1" = "switch" ] || [ "$1" = "move" ]; then
5664 op="$1"
5665 if [ "$2" = "prev" ]; then
5666 dest_ws="$prev_ws"
5667 elif [ "$2" = "next" ]; then
5668 dest_ws="$next_ws"
5669 else
5670 echo "Usage: $0 $1 {prev|next} [follow]"
5671 exit 1
5672 fi
5673else
5674 echo "Usage: $0 {switch|move} {prev|next} [follow]"
5675 exit 1
5676fi
5677
5678if [ "$op" = "switch" ]; then
5679 sway workspace "$dest_ws"
5680elif [ "$op" = "move" ]; then
5681 sway move container to workspace "$dest_ws"
5682 if [ "$3" = "follow" ]; then
5683 sway workspace "$dest_ws"
5684 fi
5685fi
5686#+end_src
5687
5688** toggle-layout
5689:PROPERTIES:
5690:header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
5691:END:
5692
5693#+begin_src bash :tangle no
5694lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
5695
5696if [ "$lang" = "us" ]; then
5697 setxkbmap ir
5698else
5699 setxkbmap us
5700 # xmodmap $HOME/.Xmodmap
5701fi
5702#+end_src
5703
5704** toggle-presentation-mode
5705:PROPERTIES:
5706:header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
5707:END:
5708
5709#+begin_src bash :tangle no
5710xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
5711#+end_src
5712
5713** toggle-tablet
5714:PROPERTIES:
5715:header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
5716:END:
5717
5718This script toggles between a 'normal' mode and a 'tablet' mode, doing
5719a few things:
5720
5721- rotates the screen using =xrandr=, so that rotating the physical
5722 display of my X220t would have the laptop's battery on the right
5723 hand side,
5724- enables touch screen,
5725- properly rotates the stylus pen and touch screen pointers, and
5726- toggles between RGB and Vertical BGR sub-pixel order.
5727
5728#+begin_src bash :tangle no
5729case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
5730 0) # Screen is not rotated, we should rotate it right (90°)
5731 xrandr -o 3
5732 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
5733 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
5734 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
5735 xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
5736 ;;
5737 1) # Currently top is rotated right, we should set it normal (0°)
5738 xrandr -o 0
5739 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
5740 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
5741 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
5742 xfconf-query -c xsettings -p /Xft/RGBA -s rgb
5743 ;;
5744 *)
5745 echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
5746 exit 1
5747 ;;
5748esac
5749#+end_src
5750
5751** unlock-def-gk.py
5752:PROPERTIES:
5753:header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
5754:END:
5755
5756#+begin_src python :tangle no
5757import gnomekeyring as gk
5758# list_item_ids_sync('login')[0] == 1L
5759gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
5760#+end_src
5761
5762** volume-info
5763:PROPERTIES:
5764:header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh"
5765:END:
5766
5767#+begin_src sh :tangle no
5768cur_vol=$(pamixer --get-volume)
5769
5770if [ $(pamixer --get-mute) = true ]; then
5771 printf 'mt \n' "$cur_vol"
5772else
5773 printf '%02d \n' "$cur_vol"
5774fi
5775#+end_src
5776
5777** wp
5778
5779My little wallpaper changer script.
5780
5781*** wp
5782:PROPERTIES:
5783:header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
5784:END:
5785
5786#+begin_src bash :tangle no
5787export DISPLAY=:0
5788
5789case "$1" in
5790 "day")
5791 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5792 ;;
5793 "night")
5794 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5795 ;;
5796 *)
5797 echo $"Usage: $0 {day|night}"
5798 exit 1
5799esac
5800#+end_src
5801
5802*** wp-auto
5803:PROPERTIES:
5804:header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
5805:END:
5806
5807#+begin_src bash :tangle no
5808SED=$(which sed)
5809ROFI=$(which rofi)
5810
5811export DISPLAY=:0
5812HOUR=$(date +%H)
5813
5814if [ -z "${SED}" ]
5815then
5816 echo "Did not find 'sed', script cannot continue."
5817 exit 1
5818fi
5819if [ -z "${ROFI}" ]
5820then
5821 echo "Did not find rofi, there is no point to continue."
5822 exit 1
5823fi
5824
5825###
5826# Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
5827# Repeated calls should leave the config clean-ish
5828###
5829function set_theme()
5830{
5831 CDIR="${HOME}/.config/rofi/"
5832 if [ ! -d "${CDIR}" ]
5833 then
5834 mkdir -p ${CDIR}
5835 fi
5836 if [ -f "${CDIR}/config" ]
5837 then
5838 ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
5839 fi
5840 echo "rofi.theme: ${1}" >> "${CDIR}/config"
5841
5842}
5843
5844if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
5845 then
5846 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5847 xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
5848 set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
5849 else
5850 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5851 xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
5852 set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
5853fi
5854#+end_src
5855
5856*** wp.service
5857:PROPERTIES:
5858:header-args+: :tangle ~/.config/systemd/user/wp.service
5859:END:
5860
5861#+begin_src conf :tangle no
5862[Unit]
5863Description=wallpaper service
5864
5865[Service]
5866Type=oneshot
5867ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
5868#+end_src
5869
5870*** wp.timer
5871:PROPERTIES:
5872:header-args+: :tangle ~/.config/systemd/user/wp.timer
5873:END:
5874
5875#+begin_src conf :tangle no
5876[Unit]
5877[Unit]
5878Description=wallpaper timer
5879
5880[Timer]
5881OnCalendar=07,21:00
5882Unit=wp.service
5883Persistent=true
5884
5885[Install]
5886WantedBy=timers.target
5887#+end_src
5888
5889** zathura-sync.sh
5890:PROPERTIES:
5891:header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
5892:END:
5893
5894#+begin_src sh
5895pos="$1"
5896pdffile="$2"
5897zathura --synctex-forward "$pos" "$pdffile" || \
5898 (
5899 zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
5900 sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
5901#+end_src
5902** Fun :)
5903
5904*** eat-em
5905:PROPERTIES:
5906:header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
5907:END:
5908
5909#+begin_src sh
5910# Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5911# [ESC] character in original post removed here.
5912
5913# ANSI Color -- use these variables to easily have different color
5914# and format output. Make sure to output the reset sequence after
5915# colors (f = foreground, b = background), and use the 'off'
5916# feature for anything you turn on.
5917
5918initializeANSI()
5919{
5920 esc="$(echo -en '\e')"
5921
5922 blackf="${esc}[30m"; redf="${esc}[31m"; greenf="${esc}[32m"
5923 yellowf="${esc}[33m" bluef="${esc}[34m"; purplef="${esc}[35m"
5924 cyanf="${esc}[36m"; whitef="${esc}[37m"
5925
5926 blackb="${esc}[40m"; redb="${esc}[41m"; greenb="${esc}[42m"
5927 yellowb="${esc}[43m" blueb="${esc}[44m"; purpleb="${esc}[45m"
5928 cyanb="${esc}[46m"; whiteb="${esc}[47m"
5929
5930 boldon="${esc}[1m"; boldoff="${esc}[22m"
5931 italicson="${esc}[3m"; italicsoff="${esc}[23m"
5932 ulon="${esc}[4m"; uloff="${esc}[24m"
5933 invon="${esc}[7m"; invoff="${esc}[27m"
5934
5935 reset="${esc}[0m"
5936}
5937
5938# note in this first use that switching colors doesn't require a reset
5939# first - the new color overrides the old one.
5940
5941#clear
5942
5943initializeANSI
5944
5945cat << EOF
5946
5947 ${yellowf} ▄███████▄${reset} ${redf} ▄██████▄${reset} ${greenf} ▄██████▄${reset} ${bluef} ▄██████▄${reset} ${purplef} ▄██████▄${reset} ${cyanf} ▄██████▄${reset}
5948 ${yellowf}▄█████████▀▀${reset} ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset} ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset} ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset} ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset} ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5949 ${yellowf}███████▀${reset} ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset} ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset} ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset} ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset} ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5950 ${yellowf}███████▄${reset} ${redf}████████████${reset} ${greenf}████████████${reset} ${bluef}████████████${reset} ${purplef}████████████${reset} ${cyanf}████████████${reset}
5951 ${yellowf}▀█████████▄▄${reset} ${redf}██▀██▀▀██▀██${reset} ${greenf}██▀██▀▀██▀██${reset} ${bluef}██▀██▀▀██▀██${reset} ${purplef}██▀██▀▀██▀██${reset} ${cyanf}██▀██▀▀██▀██${reset}
5952 ${yellowf} ▀███████▀${reset} ${redf}▀ ▀ ▀ ▀${reset} ${greenf}▀ ▀ ▀ ▀${reset} ${bluef}▀ ▀ ▀ ▀${reset} ${purplef}▀ ▀ ▀ ▀${reset} ${cyanf}▀ ▀ ▀ ▀${reset}
5953
5954 ${boldon}${yellowf} ▄███████▄ ${redf} ▄██████▄ ${greenf} ▄██████▄ ${bluef} ▄██████▄ ${purplef} ▄██████▄ ${cyanf} ▄██████▄${reset}
5955 ${boldon}${yellowf}▄█████████▀▀ ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄ ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄ ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄ ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄ ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5956 ${boldon}${yellowf}███████▀ ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███ ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███ ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███ ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███ ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5957 ${boldon}${yellowf}███████▄ ${redf}████████████ ${greenf}████████████ ${bluef}████████████ ${purplef}████████████ ${cyanf}████████████${reset}
5958 ${boldon}${yellowf}▀█████████▄▄ ${redf}██▀██▀▀██▀██ ${greenf}██▀██▀▀██▀██ ${bluef}██▀██▀▀██▀██ ${purplef}██▀██▀▀██▀██ ${cyanf}██▀██▀▀██▀██${reset}
5959 ${boldon}${yellowf} ▀███████▀ ${redf}▀ ▀ ▀ ▀ ${greenf}▀ ▀ ▀ ▀ ${bluef}▀ ▀ ▀ ▀ ${purplef}▀ ▀ ▀ ▀ ${cyanf}▀ ▀ ▀ ▀${reset}
5960
5961EOF
5962#+end_src
5963
5964*** invade-em
5965:PROPERTIES:
5966:header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
5967:END:
5968
5969#+begin_src bash
5970#
5971# ANSI color scheme script featuring Space Invaders
5972#
5973# Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5974# Modified by lolilolicon
5975#
5976
5977f=3 b=4
5978for j in f b; do
5979 for i in {0..7}; do
5980 printf -v $j$i %b "\e[${!j}${i}m"
5981 done
5982done
5983bld=$'\e[1m'
5984rst=$'\e[0m'
5985
5986cat << EOF
5987
5988 $f1 ▀▄ ▄▀ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4 ▀▄ ▄▀ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
5989 $f1 ▄█▀███▀█▄ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4 ▄█▀███▀█▄ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
5990 $f1█▀███████▀█ $f2▀▀███▀▀███▀▀ $f3▀█▀██▀█▀ $f4█▀███████▀█ $f5▀▀███▀▀███▀▀ $f6▀█▀██▀█▀$rst
5991 $f1▀ ▀▄▄ ▄▄▀ ▀ $f2 ▀█▄ ▀▀ ▄█▀ $f3▀▄ ▄▀ $f4▀ ▀▄▄ ▄▄▀ ▀ $f5 ▀█▄ ▀▀ ▄█▀ $f6▀▄ ▄▀$rst
5992
5993 $bld$f1▄ ▀▄ ▄▀ ▄ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4▄ ▀▄ ▄▀ ▄ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
5994 $bld$f1█▄█▀███▀█▄█ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4█▄█▀███▀█▄█ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
5995 $bld$f1▀█████████▀ $f2▀▀▀██▀▀██▀▀▀ $f3▀▀█▀▀█▀▀ $f4▀█████████▀ $f5▀▀▀██▀▀██▀▀▀ $f6▀▀█▀▀█▀▀$rst
5996 $bld$f1 ▄▀ ▀▄ $f2▄▄▀▀ ▀▀ ▀▀▄▄ $f3▄▀▄▀▀▄▀▄ $f4 ▄▀ ▀▄ $f5▄▄▀▀ ▀▀ ▀▀▄▄ $f6▄▀▄▀▀▄▀▄$rst
5997
5998
5999 $f7▌$rst
6000
6001 $f7▌$rst
6002
6003 $f7 ▄█▄ $rst
6004 $f7▄█████████▄$rst
6005 $f7▀▀▀▀▀▀▀▀▀▀▀$rst
6006
6007EOF
6008#+end_src