[rc] update nix's tls_fingerprint in msmtprc, reorder notmuch addrs
[~bandali/configs] / rc.org
... / ...
CommitLineData
1#+title: rc.org
2#+property: header-args :comments link :mkdirp yes :results silent
3
4* About
5
6This org file contains the configuration files of pretty much every
7program I use. The files are tangled (i.e. exported, or derived) from
8this file using =org-babel=.
9
10Note: This file is best viewed inside Emacs with org mode.
11
12* Configs
13
14This section contains the configuration files (dotfiles) of various
15programs I use.
16
17** [[https://github.com/afewmail/afew][afew]]
18:PROPERTIES:
19:header-args+: :tangle ~/.config/afew/config
20:END:
21
22#+begin_quote
23an initial tagging script for notmuch mail
24#+end_quote
25
26#+begin_src conf
27# This is the default filter chain
28[SpamFilter]
29#[ClassifyingFilter]
30[KillThreadsFilter]
31#[ListMailsFilter]
32[ArchiveSentMailsFilter]
33sent_tag = sent
34[InboxFilter]
35
36#[Filter.1]
37#query = 'folder:amin/lists/.haskell-cafe'
38#tags = +lists;+lists/haskell-cafe
39#message = lists/haskell-cafe
40
41#[Filter.2]
42#query = 'folder:amin/lists/.haskell-weekly'
43#tags = +lists;+lists/haskell-weekly
44#message = lists/haskell-weekly
45
46#[Filter.3]
47#query = 'folder:amin/lists/.hackernewsletter'
48#tags = +lists;+lists/hackernewsletter
49#message = lists/hackernewsletter
50
51
52#[FolderNameFilter]
53#folder_blacklist = Inbox
54#maildir_separator = /.
55#folder_transforms = Drafts:draft Junk:spam Trash:deleted Sent:sent Archive:archive lists/haskell-cafe:lists/haskell-cafe
56#+end_src
57
58** bspwm
59
60*** bspwmrc
61:PROPERTIES:
62:header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
63:END:
64
65#+begin_src sh
66sxhkd &
67sh ~/.fehbg &
68xfce4-panel -d &
69compton &
70sleep 0.5 && pasystray --notify=all &
71
72bspc monitor -d I II III IV V VI VII VIII IX X
73#bspc monitor eDP-1 -d I II III IV V
74#bspc monitor HDMI-1 -d VI VII VIII IX X
75
76#bspc config border_width 2
77#bspc config window_gap 8
78bspc config window_gap 0
79
80bspc config bottom_padding 26
81
82bspc config split_ratio 0.52
83bspc config borderless_monocle true
84bspc config gapless_monocle true
85bspc config click_to_focus button1
86bspc config directional_focus_tightness low
87
88#bspc rule -a Firefox desktop='^1' follow=on
89bspc rule -a Nightly desktop='^1' follow=on
90bspc rule -a Emacs desktop='^2' state=tiled follow=on
91#bspc rule -a Chromium desktop='^4' follow=on
92bspc rule -a URxvt state=floating
93bspc rule -a URxvt:tiled state=tiled
94bspc rule -a Connman-gtk state=floating
95bspc rule -a Xfce4-panel state=floating
96bspc rule -a TelegramDesktop state=floating
97bspc rule -a Ec state=floating
98bspc rule -a Pavucontrol state=floating
99bspc rule -a Eog state=floating
100bspc rule -a Seahorse state=floating
101bspc rule -a mpv state=floating
102bspc rule -a Evince state=floating
103bspc rule -a Meld state=floating
104bspc rule -a Autokey-gtk state=floating
105bspc rule -a Mousepad state=floating
106bspc rule -a Wrapper-1.0 state=floating
107bspc rule -a File-roller state=floating
108bspc rule -a Gnome-disks state=floating
109bspc rule -a Termite state=floating
110bspc rule -a Termite:tiled state=tiled
111bspc rule -a Thunderbird:Calendar state=floating
112bspc rule -a Audacity state=floating
113bspc rule -a Proof state=floating # pvs x-show-proof
114bspc rule -a Nm-connection-editor state=floating
115bspc rule -a Wire state=floating
116bspc rule -a discord state=floating
117bspc rule -a X2goclient state=floating
118bspc rule -a SimpleScreenRecorder state=floating
119bspc rule -a Gimp state=floating
120bspc rule -a Wrapper-2.0 state=floating
121bspc rule -a Zathura state=tiled
122#+end_src
123
124*** sxhkdrc
125:PROPERTIES:
126:header-args+: :tangle ~/.config/sxhkd/sxhkdrc
127:END:
128
129#+begin_src conf
130#
131# wm independent hotkeys
132#
133
134# terminal emulator
135super + {_,shift} + Return
136 urxvt{_, -name tiled}
137
138#super + {_,shift} + Return
139# termite{_, --name=tiled}
140
141# program launcher
142super + space
143 rofi -show run -display-run '> ' -display-window ' 🗔 '
144
145super + alt + space
146 xfce4-popup-whiskermenu
147
148# window finder
149super + backslash
150 rofi -show window -display-run '> ' -display-window ' 🗔 '
151
152# password manager
153alt + space
154 rofi-pass
155
156# firefox
157#super + r
158# firefox
159
160# chromium
161#super + c
162# chromium -incognito
163
164# emacs
165super + e
166 emacs
167
168# make sxhkd reload its configuration files:
169super + Escape
170 pkill -USR1 -x sxhkd
171
172# volume {up,down}
173XF86Audio{Raise,Lower}Volume
174 pamixer --allow-boost --{in,de}crease 5
175
176# mute
177XF86AudioMute
178 pamixer --toggle-mute
179
180# playback control
181XF86Audio{Play,Prev,Next}
182 mpc {toggle,prev,next}
183
184# lock the screen
185super + shift + q
186 light-locker-command -l
187
188# Toggle keyboard layout
189super + F7
190 toggle-layout
191
192# Toggle Xfce presentation mode
193XF86LaunchB
194 toggle-presentation-mode
195
196# monitor brightness
197XF86MonBrightness{Up,Down}
198 light -{A,U} 5
199
200super + apostrophe
201 rofi-light
202
203# keyboard brightness
204#XF86KbdBrightness{Up,Down}
205# kbdlight {up,down}
206
207XF86RotateWindows
208 toggle-tablet
209
210#
211# bspwm hotkeys
212#
213
214# quit bspwm normally
215super + alt + Escape
216 bspc quit
217
218# close and kill
219super + {w,q}
220 bspc node -{c,k}
221
222# alternate between the tiled and monocle layout
223super + m
224 bspc desktop -l next
225
226# send the newest marked node to the newest preselected node
227super + y
228 bspc node newest.marked.local -n newest.!automatic.local
229
230# swap the current node and the biggest node
231super + g
232 bspc node -s biggest
233
234#
235# state/flags
236#
237
238# set the window state
239super + {t,shift + t,s,f}
240 bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
241
242# set the node flags
243super + ctrl + {m,x,y,z}
244 bspc node -g {marked,locked,sticky,private}
245
246#
247# focus/swap
248#
249
250# focus the node in the given direction
251super + {_,shift + }{h,j,k,l}
252 bspc node -{f,s} {west,south,north,east}
253
254# focus the node for the given path jump
255super + {p,b,comma,period}
256 bspc node -f @{parent,brother,first,second}
257
258# focus the next/previous node in the current desktop
259super + {_,shift + }c
260 bspc node -f {next,prev}.local
261
262# focus the next/previous desktop in the current monitor
263super + bracket{left,right}
264 bspc desktop -f {prev,next}.local
265
266# send to next/prev desktop
267super + shift + bracket{left,right}
268 bspc node -d {prev,next} --follow
269
270# focus the last node/desktop
271super + {grave,Tab}
272 bspc {node,desktop} -f last
273
274# focus the older or newer node in the focus history
275super + {o,i}
276 bspc wm -h off; \
277 bspc node {older,newer} -f; \
278 bspc wm -h on
279
280# focus or send to the given desktop
281super + {_,shift + }{1-9,0}
282 bspc {desktop -f,node -d} '^{1-9,10}'
283
284#
285# preselect
286#
287
288# preselect the direction
289super + ctrl + {h,j,k,l}
290 bspc node -p {west,south,north,east}
291
292# preselect the ratio
293super + ctrl + {1-9}
294 bspc node -o 0.{1-9}
295
296# cancel the preselection for the focused node
297super + ctrl + space
298 bspc node -p cancel
299
300# cancel the preselection for the focused desktop
301super + ctrl + shift + space
302 bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
303
304#
305# move/resize
306#
307
308# expand a window by moving one of its side outward
309super + alt + {h,j,k,l}
310 bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
311
312# contract a window by moving one of its side inward
313super + alt + shift + {h,j,k,l}
314 bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
315
316# move a floating window
317super + {Left,Down,Up,Right}
318 bspc node -v {-20 0,0 20,0 -20,20 0}
319
320#alt + bracket{left,right}
321# xdotool key --clearmodifiers ctrl+Page_{Up,Down}
322#+end_src
323
324** compton
325:PROPERTIES:
326:header-args+: :tangle ~/.config/compton.conf
327:END:
328
329#+begin_src conf
330# Shadow
331shadow = false; # Enabled client-side shadows on windows.
332no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows.
333no-dnd-shadow = true; # Don't draw shadows on DND windows.
334clear-shadow = true; # Zero the part of the shadow's mask behind the
335 # window. Fix some weirdness with ARGB windows.
336shadow-radius = 5; # The blur radius for shadows. (default 12)
337shadow-offset-x = -5; # The left offset for shadows. (default -15)
338shadow-offset-y = -5; # The top offset for shadows. (default -15)
339# shadow-opacity = 0.7; # The translucency for shadows. (default .75)
340# shadow-red = 0.0; # Red color value of shadow. (0.0 - 1.0, defaults to 0)
341# shadow-green = 0.0; # Green color value of shadow. (0.0 - 1.0, defaults to 0)
342# shadow-blue = 0.0; # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
343shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ]; # Exclude conditions for shadows.
344# shadow-exclude = "n:e:Notification";
345#shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
346shadow-ignore-shaped = true; # Avoid drawing shadow on all shaped windows
347 # (see also: --detect-rounded-corners)
348
349# Opacity
350menu-opacity = 1.0; # The opacity for menus. (default 1.0)
351#inactive-opacity = 0.9; # Default opacity of inactive windows. (0.0 - 1.0)
352# active-opacity = 0.8; # Default opacity for active windows. (0.0 - 1.0)
353frame-opacity = 1.0; # Opacity of window titlebars and borders. (0.1 - 1.0)
354# inactive-opacity-override = true; # Let inactive opacity set by 'inactive-opacity' overrides
355 # value of _NET_WM_OPACITY. Bad choice.
356alpha-step = 0.06; # XRender backend: Step size for alpha pictures. Increasing
357 # it may result in less X resource usage,
358 # Yet fading may look bad.
359#inactive-dim = 0.5; # Dim inactive windows. (0.0 - 1.0)
360#inactive-dim-fixed = true; # Do not let dimness adjust based on window opacity.
361# blur-background = true; # Blur background of transparent windows.
362 # Bad performance with X Render backend.
363 # GLX backend is preferred.
364# blur-background-frame = true; # Blur background of opaque windows with transparent
365 # frames as well.
366blur-background-fixed = true; # Do not let blur radius adjust based on window opacity.
367blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
368 # Exclude conditions for background blur.
369
370# Fading
371fading = false; # Fade windows during opacity changes.
372fade-delta = 3; # The time between steps in a fade in milliseconds. (default 10).
373fade-in-step = 0.03; # Opacity change between steps while fading in. (default 0.028).
374fade-out-step = 0.03; # Opacity change between steps while fading out. (default 0.03).
375# no-fading-openclose = true; # Avoid fade windows in/out when opening/closing.
376fade-exclude = [ ]; # Exclude conditions for fading.
377
378# Other
379backend = "glx" # Backend to use: "xrender" or "glx". GLX backend is typically
380 # much faster but depends on a sane driver.
381mark-wmwin-focused = true; # Try to detect WM windows and mark them as active.
382mark-ovredir-focused = true; # Mark all non-WM but override-redirect windows active (e.g. menus).
383use-ewmh-active-win = true; # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
384 # instead of using FocusIn/Out events. Usually more reliable but
385 # depends on a EWMH-compliant WM.
386detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
387detect-client-opacity = true; # Detect _NET_WM_OPACITY on client windows, useful for window
388 # managers not passing _NET_WM_OPACITY of client windows to frame
389 # windows.
390refresh-rate = 0; # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
391vsync = "drm"; # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
392 # See man page for more details.
393dbe = false; # Enable DBE painting mode. Rarely needed.
394paint-on-overlay = true; # Painting on X Composite overlay window. Recommended.
395sw-opti = false; # Limit compton to repaint at most once every 1 / refresh_rate.
396 # Incompatible with certain VSync methods.
397unredir-if-possible = false; # Unredirect all windows if a full-screen opaque window is
398 # detected, to maximize performance for full-screen windows.
399focus-exclude = [ ]; # A list of conditions of windows that should always be considered
400 # focused.
401detect-transient = true; # Use WM_TRANSIENT_FOR to group windows, and consider windows in
402 # the same group focused at the same time.
403detect-client-leader = true; # Use WM_CLIENT_LEADER to group windows.
404invert-color-include = [ ]; # Conditions for windows to be painted with inverted color.
405
406# GLX backend # GLX backend fine-tune options. See man page for more info.
407glx-no-stencil = true; # Recommended.
408glx-copy-from-front = false; # Useful with --glx-swap-method,
409# glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
410# glx-no-rebind-pixmap = true; # Recommended if it works.
411glx-no-rebind-pixmap = true; # Recommended if it works.
412#glx-swap-method = "4"; # See man page.
413glx-swap-method = "4"; # See man page.
414
415# Window type settings
416wintypes:
417{
418 tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
419 menu = { shadow = false; };
420 dropdown_menu = { shadow = false; };
421 popup_menu = { shadow = false; };
422 utility = { shadow = false; };
423 # fade: Fade the particular type of windows.
424 # shadow: Give those windows shadow
425 # opacity: Default opacity for the type of windows.
426 # focus: Whether to always consider windows of this type focused.
427};
428#+end_src
429
430** Dunst
431:PROPERTIES:
432:header-args+: :tangle ~/.config/dunst/dunstrc
433:END:
434
435#+begin_src conf
436[global]
437#font = Ubuntu Mono 10.5
438font = Inconsolata 11
439
440# Path to default icons.
441icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
442
443icon_position = left
444# <b>bold</b>
445# <i>italic</i>
446# <s>strikethrough<s/>
447# <u>underline</u>
448markup = full
449# The format of the message. Possible variables are:
450# %a appname
451# %s summary
452# %b body
453# %i iconname (including its path)
454# %I iconname (without its path)
455# %p progress value if set ([ 0%] to [100%]) or nothing
456# Markup is allowed
457format = "<b>%s</b>\n%b"
458# Sort messages by urgency
459sort = yes
460# Show how many messages are currently hidden (because of geometry)
461indicate_hiddenl= no
462# Alignment of message text.
463# Possible values are "left", "center" and "right"
464alignment = center
465# The frequency with wich text that is longer than the notification
466# window allows bounces back and forth.
467# This option conflicts with 'word_wrap'.
468# Set to 0 to disable
469bounce_freq = 3
470# show age of message if message is older than show_age_threshold seconds.
471# set to -1 to disable
472show_age_threshold = -1
473# split notifications into multiple lines if they don't fit into geometry
474word_wrap = yes
475# ignore newlines '\n' in notifications
476ignore_newline = no
477# The geometry of the message window.
478# geometry [{width}]x{height}][+/-{x}+/-{y}]
479# The height is measured in number of notifications everything else in pixels. If the width
480# is omitted but the height is given ("-geometry x2"), the message window
481# expands over the whole screen (dmenu-like). If width is 0,
482# the window expands to the longest message displayed.
483# A positive x is measured from the left, a negative from the
484# right side of the screen. Y is measured from the top and down respectevly.
485# The width can be negative. In this case the actual width is the
486# screen width minus the width defined in within the geometry option.
487#geometry = "410x12-12+12"
488#geometry = "0x0-30-30"
489geometry = "260x12-30-30"
490# The transparency of the window. range: [0; 100]
491# This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
492transparency = 0
493# Don't remove messages, if the user is idle (no mouse or keyboard input)
494# for longer than idle_threshold seconds.
495# Set to 0 to disable.
496idle_threshold = 120
497# Which monitor should the notifications be displayed on.
498monitor = 0
499# Display notification on focused monitor. Possible modes are:
500# mouse: follow mouse pointer
501# keyboard: follow window with keyboard focus
502# none: don't follow anything
503#
504# "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
505# This should be the case for almost all modern windowmanagers.
506#
507# If this option is set to mouse or keyboard, the monitor option will be
508# ignored.
509follow = keyboard
510# should a notification popped up from history be sticky or
511# timeout as if it would normally do.
512sticky_history = yes
513# The height of a single line. If the height is smaller than the font height,
514# it will get raised to the font height.
515# This adds empty space above and under the text.
516line_height = 0
517
518show_indicators = yes
519
520# Draw a line of 'separatpr_height' pixel height between two notifications.
521# Set to 0 to disable
522separator_height = 3
523# padding between text and separator
524padding = 8
525# horizontal padding
526horizontal_padding = 8
527# Define a color for the separator.
528# possible values are:
529# * auto: dunst tries to find a color fitting to the background
530# * foreground: use the same color as the foreground
531# * frame: use the same color as the frame.
532# * anything else will be interpreted as a X color
533separator_color = foreground
534# print a notification on startup
535# This is mainly for error detection, since dbus (re-)starts dunst
536# automatically after a crash.
537startup_notification = false
538# dmenu path
539#dmenu = /usr/bin/dmenu -p dunst:
540dmenu = /usr/bin/rofi -dmenu -p dunst:
541# browser for opening urls in context menu
542browser = /usr/bin/firefox -new-tab
543[frame]
544width = 0
545color = "#377222"
546[shortcuts]
547# shortcuts are specified as [modifier+][modifier+]...key
548# available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
549# and 'mod4' (windows-key)
550# xev might be helpful to find names for keys
551# close notification
552close = ctrl+space
553# close all notifications
554close_all = ctrl+shift+space
555# redisplay last message(s)
556# On the US keyboard layout 'grave' is normally above TAB and left of '1'.
557history = ctrl+shift+h
558# context menu
559context = ctrl+shift+period
560[urgency_low]
561# IMPORTANT: colors have to be defined in quotation marks.
562# Otherwise the '#' and following would be interpreted as a comment.
563background = "#1d2a30"
564foreground = "#71c2af"
565timeout = 3
566[urgency_normal]
567background = "#1d2a30"
568foreground = "#71c2af"
569timeout = 0
570[urgency_critical]
571background = "#1d2a30"
572foreground = "#ff9982"
573timeout = 0
574
575# Every section that isn't one of the above is interpreted as a rules
576# to override settings for certain messages.
577# Messages can be matched by 'appname', 'summary', 'body' or 'icon'
578# and you can override the 'timeout', 'urgency', 'foreground', 'background'
579# and 'format'.
580# Shell-like globbing will get expanded.
581#
582# SCRIPTING
583# you can specify a script that gets run when the rule matches by setting
584# the 'script' option.
585# The script will be called as follows:
586# script appname summary body icon urgency
587# where urgency can be "LOW", "NORMAL" or "CRITICAL".
588#
589# NOTE: if you don't want a notification to be displayed, set the format to ""
590# NOTE: It might be helpful to run dunst -print in a terminal in order to find
591# fitting options for rules.
592#[espeak]
593# summary = "*"
594# script = dunst_espeak.sh
595#[script-test]
596# summary = "*script*"
597# script = dunst_test.sh
598#[ignore]
599## This notification will not be displayed
600# summary = "foobar"
601# format = ""
602#[signed_on]
603# appname = Pidgin
604# summary = "*signed on*"
605# urgency = low
606#
607#[signed_off]
608# appname = Pidgin
609# summary = *signed off*
610# urgency = low
611#
612#[says]
613# appname = Pidgin
614# summary = *says*
615# urgency = critical
616#
617#[twitter]
618# appname = Pidgin
619# summary = *twitter.com*
620# urgency = normal
621#
622[xfpm-backlight]
623 summary = *Brightness*
624 urgency = low
625#+end_src
626
627** Fontconfig
628:PROPERTIES:
629:header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
630:END:
631
632#+begin_src xml
633<?xml version="1.0"?>
634<!DOCTYPE fontconfig SYSTEM "fonts.dtd">
635<fontconfig>
636 <match target="font">
637 <edit mode="assign" name="rgba">
638 <const>rgb</const>
639 </edit>
640 </match>
641 <match target="font">
642 <edit mode="assign" name="hinting">
643 <bool>true</bool>
644 </edit>
645 </match>
646 <match target="font">
647 <edit mode="assign" name="hintstyle">
648 <const>hintslight</const>
649 </edit>
650 </match>
651 <match target="font">
652 <edit mode="assign" name="antialias">
653 <bool>true</bool>
654 </edit>
655 </match>
656 <match target="font">
657 <edit mode="assign" name="lcdfilter">
658 <const>lcddefault</const>
659 </edit>
660 </match>
661 <dir>~/.fonts</dir>
662
663 <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
664 <alias binding="same">
665 <family>Helvetica</family>
666 <accept>
667 <family>Liberation Sans</family>
668 </accept>
669</alias>
670</fontconfig>
671#+end_src
672
673** Git
674
675*** gitconfig
676:PROPERTIES:
677:header-args+: :tangle ~/.gitconfig
678:END:
679
680**** user
681#+begin_src conf
682[user]
683 name = Amin Bandali
684 email = amin@aminb.org
685 # signingkey = 4E05246AB0BF7FFB
686#+end_src
687
688**** signing
689#+begin_src conf
690# [commit]
691# gpgsign = true
692# [format]
693# signoff = true
694#+end_src
695
696**** core
697#+begin_src conf
698[core]
699 autocrlf = input # CRLF -> LF on commit
700 editor = emacsclient -t
701 excludesfile = ~/.gitignore_global
702 pager = "less"
703#+end_src
704
705**** gpg
706#+begin_src conf
707[gpg]
708 program = gpg2
709#+end_src
710
711**** alias
712#+begin_src conf
713[alias]
714 git = !exec git # handle nested git calls, e.g. git git status
715 aliases = config --get-regexp '^alias\\.'
716 a = add
717 s = status
718 sl = status --long
719 c = checkout
720 cb = checkout -b
721 b = branch
722 r = rebase
723 p = pull
724 pr = pull --rebase
725 ps = push
726 psf = push --force
727#+end_src
728
729**** color
730#+begin_src conf
731[color]
732 ui = auto
733[color "status"]
734 added = green bold
735 changed = red bold
736 untracked = red bold
737[color "branch"]
738 current = green bold
739 remote = magenta bold
740[color "diff"]
741 new = green bold
742 old = red bold
743#+end_src
744
745**** status
746#+begin_src conf
747[status]
748 # showUntrackedFiles = all
749 short=true
750 branch=true
751#+end_src
752
753**** github
754#+begin_src conf
755[github]
756 user = aminb
757#+end_src
758
759*** gitignore
760:PROPERTIES:
761:header-args+: :tangle ~/.gitignore_global
762:END:
763
764#+begin_src conf
765*.orig
766*.py[co]
767*.sublime-workspace
768*~
769.DS_Store
770*.elc
771*-autoloads.el
772#+end_src
773
774** Latexmk
775:PROPERTIES:
776:header-args+: :tangle ~/.latexmkrc
777:END:
778
779#+begin_src conf
780$pdf_previewer = "start zathura %O %S";
781$clean_ext = "aux out";
782
783# $pdf_update_method = 4;
784# $pdf_update_command = "zathura %O %S";
785
786# Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
787# by Ctrl+click in the PDF.
788# Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
789# editor.
790# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
791#+end_src
792
793** libinput
794
795Improve XPS 15 9560's touchpad experience.
796
797#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
798Section "InputClass"
799 Identifier "libinput touchpad catchall"
800 Driver "libinput"
801 MatchIsTouchpad "on"
802 Option "ClickMethod" "clickfinger"
803 Option "NaturalScrolling" "true"
804 Option "Tapping" "on"
805 Option "TappingButtonMap" "lrm"
806EndSection
807#+end_src
808
809** getmail
810
811*** getmailrc
812:PROPERTIES:
813:header-args+: :tangle ~/.getmail/getmailrc
814:END:
815
816#+begin_src conf
817[retriever]
818type = SimplePOP3SSLRetriever
819server = fencepost.gnu.org
820username = aminb
821password_command = ("gpg2", "--no-tty", "-q", "-d", "~/.passwd/gnu.gpg")
822port = 995
823use_apop = True
824
825[destination]
826type = Maildir
827path = ~/mail/gnu/Inbox/
828
829[options]
830delete = True
831#+end_src
832
833*** getmail.service
834:PROPERTIES:
835:header-args+: :tangle ~/.config/systemd/user/getmail.service
836:END:
837
838#+begin_src conf :tangle no
839[Unit]
840Description=getmail service
841
842[Service]
843Type=oneshot
844ExecStart=/usr/bin/getmail
845StandardOutput=syslog
846StandardError=syslog
847#+end_src
848
849*** getmail.timer
850:PROPERTIES:
851:header-args+: :tangle ~/.config/systemd/user/getmail.timer
852:END:
853
854#+begin_src conf :tangle no
855[Unit]
856Description=getmail timer
857
858[Timer]
859OnCalendar=*:0/30
860Persistent=true
861Unit=getmail.service
862
863[Install]
864WantedBy=timers.target
865#+end_src
866
867** GnuPG
868:PROPERTIES:
869:header-args+: :tangle ~/.gnupg/gpg-agent.conf
870:END:
871
872#+begin_src conf
873default-cache-ttl 43200
874max-cache-ttl 43200
875
876default-cache-ttl-ssh 10800
877max-cache-ttl-ssh 10800
878
879# pinentry-program /usr/bin/pinentry-qt
880#+end_src
881
882** GTK
883
884*** gtk-2.0
885:PROPERTIES:
886:header-args+: :tangle ~/.gtkrc-2.0
887:END:
888
889#+begin_src conf
890gtk-theme-name="Greybird"
891gtk-icon-theme-name="Paper"
892gtk-font-name="Ubuntu 10"
893gtk-menu-images=0
894# gtk-key-theme-name = "Emacs"
895#+end_src
896
897*** gtk-3.0
898:PROPERTIES:
899:header-args+: :tangle ~/.config/gtk-3.0/settings.ini
900:END:
901
902#+begin_src conf :tangle no
903[Settings]
904gtk-icon-theme-name = Paper
905# gtk-theme-name = Adwaita
906
907gtk-theme-name = Greybird
908# gtk-theme-name = Arc-Darker
909# gtk-theme-name = Numix-ArchBlue
910
911gtk-font-name = Ubuntu 10
912# gtk-key-theme-name = Emacs
913#+end_src
914
915** isync
916
917*** mbsyncrc
918:PROPERTIES:
919:header-args+: :tangle ~/.mbsyncrc
920:END:
921
922#+begin_src conf
923# Global defaults
924CopyArrivalDate yes
925
926######
927IMAPAccount amin
928Host nix.aminb.org
929User amin@aminb.org
930PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
931SSLType IMAPS
932
933IMAPStore amin-remote
934Account amin
935
936MaildirStore amin-local
937Path ~/mail/amin/
938Inbox ~/mail/amin/Inbox
939SubFolders Verbatim
940
941Channel amin
942Master :amin-remote:
943Slave :amin-local:
944Patterns * !dovecot*
945Create Both
946SyncState *
947
948######
949IMAPAccount uwaterloo
950Host connect.uwaterloo.ca
951User abandali
952PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
953SSLType IMAPS
954
955IMAPStore uwaterloo-remote
956Account uwaterloo
957
958MaildirStore uwaterloo-local
959Path ~/mail/uwaterloo/
960Inbox ~/mail/uwaterloo/Inbox
961SubFolders Verbatim
962
963Channel uwaterloo
964Master :uwaterloo-remote:
965Slave :uwaterloo-local:
966Patterns * !dovecot*
967Create Both
968SyncState *
969#+end_src
970
971*** mbsync.service
972:PROPERTIES:
973:header-args+: :tangle ~/.config/systemd/user/mbsync.service
974:END:
975
976#+begin_src conf :tangle no
977[Unit]
978Description=mbsync service
979
980[Service]
981Type=oneshot
982ExecStart=/usr/bin/mbsync -Va
983StandardOutput=syslog
984StandardError=syslog
985#+end_src
986
987*** mbsync.timer
988:PROPERTIES:
989:header-args+: :tangle ~/.config/systemd/user/mbsync.timer
990:END:
991
992#+begin_src conf :tangle no
993[Unit]
994Description=mbsync timer
995
996[Timer]
997OnCalendar=*:0/15
998Persistent=true
999Unit=mbsync.service
1000
1001[Install]
1002WantedBy=timers.target
1003#+end_src
1004
1005** mpd
1006:PROPERTIES:
1007:header-args+: :tangle ~/.config/mpd/mpd.conf
1008:END:
1009
1010#+begin_src conf
1011# An example configuration file for MPD.
1012# Read the user manual for documentation: http://www.musicpd.org/doc/user/
1013
1014
1015# Files and directories #######################################################
1016#
1017# This setting controls the top directory which MPD will search to discover the
1018# available audio files and add them to the daemon's online database. This
1019# setting defaults to the XDG directory, otherwise the music directory will be
1020# be disabled and audio files will only be accepted over ipc socket (using
1021# file:// protocol) or streaming files over an accepted protocol.
1022#
1023music_directory "~/usr/music"
1024#
1025# This setting sets the MPD internal playlist directory. The purpose of this
1026# directory is storage for playlists created by MPD. The server will use
1027# playlist files not created by the server but only if they are in the MPD
1028# format. This setting defaults to playlist saving being disabled.
1029#
1030playlist_directory "~/.mpd/playlists"
1031#
1032# This setting sets the location of the MPD database. This file is used to
1033# load the database at server start up and store the database while the
1034# server is not up. This setting defaults to disabled which will allow
1035# MPD to accept files over ipc socket (using file:// protocol) or streaming
1036# files over an accepted protocol.
1037#
1038db_file "~/.mpd/database"
1039#
1040# These settings are the locations for the daemon log files for the daemon.
1041# These logs are great for troubleshooting, depending on your log_level
1042# settings.
1043#
1044# The special value "syslog" makes MPD use the local syslog daemon. This
1045# setting defaults to logging to syslog, otherwise logging is disabled.
1046#
1047log_file "~/.mpd/log"
1048#
1049# This setting sets the location of the file which stores the process ID
1050# for use of mpd --kill and some init scripts. This setting is disabled by
1051# default and the pid file will not be stored.
1052#
1053pid_file "~/.mpd/pid"
1054#
1055# This setting sets the location of the file which contains information about
1056# most variables to get MPD back into the same general shape it was in before
1057# it was brought down. This setting is disabled by default and the server
1058# state will be reset on server start up.
1059#
1060state_file "~/.mpd/state"
1061#
1062# The location of the sticker database. This is a database which
1063# manages dynamic information attached to songs.
1064#
1065sticker_file "~/.mpd/sticker.sql"
1066#
1067###############################################################################
1068
1069
1070# General music daemon options ################################################
1071#
1072# This setting specifies the user that MPD will run as. MPD should never run as
1073# root and you may use this setting to make MPD change its user ID after
1074# initialization. This setting is disabled by default and MPD is run as the
1075# current user.
1076#
1077#user "nobody"
1078#
1079# This setting specifies the group that MPD will run as. If not specified
1080# primary group of user specified with "user" setting will be used (if set).
1081# This is useful if MPD needs to be a member of group such as "audio" to
1082# have permission to use sound card.
1083#
1084#group "nogroup"
1085#
1086# This setting sets the address for the daemon to listen on. Careful attention
1087# should be paid if this is assigned to anything other then the default, any.
1088# This setting can deny access to control of the daemon. Not effective if
1089# systemd socket activiation is in use.
1090#
1091# For network
1092#bind_to_address "any"
1093#
1094# And for Unix Socket
1095#bind_to_address "~/.mpd/socket"
1096#
1097# This setting is the TCP port that is desired for the daemon to get assigned
1098# to.
1099#
1100#port "6600"
1101#
1102# This setting controls the type of information which is logged. Available
1103# setting arguments are "default", "secure" or "verbose". The "verbose" setting
1104# argument is recommended for troubleshooting, though can quickly stretch
1105# available resources on limited hardware storage.
1106#
1107#log_level "default"
1108#
1109# If you have a problem with your MP3s ending abruptly it is recommended that
1110# you set this argument to "no" to attempt to fix the problem. If this solves
1111# the problem, it is highly recommended to fix the MP3 files with vbrfix
1112# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
1113# point gapless MP3 playback can be enabled.
1114#
1115#gapless_mp3_playback "yes"
1116#
1117# Setting "restore_paused" to "yes" puts MPD into pause mode instead
1118# of starting playback after startup.
1119#
1120#restore_paused "no"
1121#
1122# This setting enables MPD to create playlists in a format usable by other
1123# music players.
1124#
1125#save_absolute_paths_in_playlists "no"
1126#
1127# This setting defines a list of tag types that will be extracted during the
1128# audio file discovery process. The complete list of possible values can be
1129# found in the user manual.
1130#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
1131#
1132# This setting enables automatic update of MPD's database when files in
1133# music_directory are changed.
1134#
1135#auto_update "yes"
1136#
1137# Limit the depth of the directories being watched, 0 means only watch
1138# the music directory itself. There is no limit by default.
1139#
1140#auto_update_depth "3"
1141#
1142###############################################################################
1143
1144
1145# Symbolic link behavior ######################################################
1146#
1147# If this setting is set to "yes", MPD will discover audio files by following
1148# symbolic links outside of the configured music_directory.
1149#
1150#follow_outside_symlinks "yes"
1151#
1152# If this setting is set to "yes", MPD will discover audio files by following
1153# symbolic links inside of the configured music_directory.
1154#
1155#follow_inside_symlinks "yes"
1156#
1157###############################################################################
1158
1159
1160# Zeroconf / Avahi Service Discovery ##########################################
1161#
1162# If this setting is set to "yes", service information will be published with
1163# Zeroconf / Avahi.
1164#
1165#zeroconf_enabled "yes"
1166#
1167# The argument to this setting will be the Zeroconf / Avahi unique name for
1168# this MPD server on the network.
1169#
1170#zeroconf_name "Music Player"
1171#
1172###############################################################################
1173
1174
1175# Permissions #################################################################
1176#
1177# If this setting is set, MPD will require password authorization. The password
1178# setting can be specified multiple times for different password profiles.
1179#
1180#password "password@read,add,control,admin"
1181#
1182# This setting specifies the permissions a user has who has not yet logged in.
1183#
1184#default_permissions "read,add,control,admin"
1185#
1186###############################################################################
1187
1188
1189# Database #######################################################################
1190#
1191
1192#database {
1193# plugin "proxy"
1194# host "other.mpd.host"
1195# port "6600"
1196#}
1197
1198# Input #######################################################################
1199#
1200
1201input {
1202 plugin "curl"
1203# proxy "proxy.isp.com:8080"
1204# proxy_user "user"
1205# proxy_password "password"
1206}
1207
1208#
1209###############################################################################
1210
1211# Audio Output ################################################################
1212#
1213
1214audio_output {
1215 type "pulse"
1216 name "pulse audio"
1217}
1218
1219audio_output {
1220 type "fifo"
1221 name "my_fifo"
1222 path "/tmp/mpd.fifo"
1223 format "44100:16:2"
1224}
1225
1226# MPD supports various audio output types, as well as playing through multiple
1227# audio outputs at the same time, through multiple audio_output settings
1228# blocks. Setting this block is optional, though the server will only attempt
1229# autodetection for one sound card.
1230#
1231# An example of an ALSA output:
1232#
1233#audio_output {
1234# type "alsa"
1235# name "My ALSA Device"
1236## device "hw:0,0" # optional
1237## mixer_type "hardware" # optional
1238## mixer_device "default" # optional
1239## mixer_control "PCM" # optional
1240## mixer_index "0" # optional
1241#}
1242#
1243# An example of an OSS output:
1244#
1245#audio_output {
1246# type "oss"
1247# name "My OSS Device"
1248## device "/dev/dsp" # optional
1249## mixer_type "hardware" # optional
1250## mixer_device "/dev/mixer" # optional
1251## mixer_control "PCM" # optional
1252#}
1253#
1254# An example of a shout output (for streaming to Icecast):
1255#
1256#audio_output {
1257# type "shout"
1258# encoder "vorbis" # optional
1259# name "My Shout Stream"
1260# host "localhost"
1261# port "8000"
1262# mount "/mpd.ogg"
1263# password "hackme"
1264# quality "5.0"
1265# bitrate "128"
1266# format "44100:16:1"
1267## protocol "icecast2" # optional
1268## user "source" # optional
1269## description "My Stream Description" # optional
1270## url "http://example.com" # optional
1271## genre "jazz" # optional
1272## public "no" # optional
1273## timeout "2" # optional
1274## mixer_type "software" # optional
1275#}
1276#
1277# An example of a recorder output:
1278#
1279#audio_output {
1280# type "recorder"
1281# name "My recorder"
1282# encoder "vorbis" # optional, vorbis or lame
1283# path "/var/lib/mpd/recorder/mpd.ogg"
1284## quality "5.0" # do not define if bitrate is defined
1285# bitrate "128" # do not define if quality is defined
1286# format "44100:16:1"
1287#}
1288#
1289# An example of a httpd output (built-in HTTP streaming server):
1290#
1291#audio_output {
1292# type "httpd"
1293# name "My HTTP Stream"
1294# encoder "vorbis" # optional, vorbis or lame
1295# port "8000"
1296# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
1297## quality "5.0" # do not define if bitrate is defined
1298# bitrate "128" # do not define if quality is defined
1299# format "44100:16:1"
1300# max_clients "0" # optional 0=no limit
1301#}
1302#
1303# An example of a pulseaudio output (streaming to a remote pulseaudio server)
1304#
1305#audio_output {
1306# type "pulse"
1307# name "My Pulse Output"
1308## server "remote_server" # optional
1309## sink "remote_server_sink" # optional
1310#}
1311#
1312# An example of a winmm output (Windows multimedia API).
1313#
1314#audio_output {
1315# type "winmm"
1316# name "My WinMM output"
1317## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1318# or
1319## device "0" # optional
1320## mixer_type "hardware" # optional
1321#}
1322#
1323# An example of an openal output.
1324#
1325#audio_output {
1326# type "openal"
1327# name "My OpenAL output"
1328## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1329#}
1330#
1331# An example of an sndio output.
1332#
1333#audio_output {
1334# type "sndio"
1335# name "sndio output"
1336# mixer_type "software"
1337#}
1338#
1339# An example of an OS X output:
1340#
1341#audio_output {
1342# type "osx"
1343# name "My OS X Device"
1344## device "Built-in Output" # optional
1345## channel_map "-1,-1,0,1" # optional
1346#}
1347#
1348## Example "pipe" output:
1349#
1350#audio_output {
1351# type "pipe"
1352# name "my pipe"
1353# command "aplay -f cd 2>/dev/null"
1354## Or if you're want to use AudioCompress
1355# command "AudioCompress -m | aplay -f cd 2>/dev/null"
1356## Or to send raw PCM stream through PCM:
1357# command "nc example.org 8765"
1358# format "44100:16:2"
1359#}
1360#
1361## An example of a null output (for no audio output):
1362#
1363#audio_output {
1364# type "null"
1365# name "My Null Output"
1366# mixer_type "none" # optional
1367#}
1368#
1369###############################################################################
1370
1371
1372# Normalization automatic volume adjustments ##################################
1373#
1374# This setting specifies the type of ReplayGain to use. This setting can have
1375# the argument "off", "album", "track" or "auto". "auto" is a special mode that
1376# chooses between "track" and "album" depending on the current state of
1377# random playback. If random playback is enabled then "track" mode is used.
1378# See <http://www.replaygain.org> for more details about ReplayGain.
1379# This setting is off by default.
1380#
1381#replaygain "album"
1382#
1383# This setting sets the pre-amp used for files that have ReplayGain tags. By
1384# default this setting is disabled.
1385#
1386#replaygain_preamp "0"
1387#
1388# This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1389# By default this setting is disabled.
1390#
1391#replaygain_missing_preamp "0"
1392#
1393# This setting enables or disables ReplayGain limiting.
1394# MPD calculates actual amplification based on the ReplayGain tags
1395# and replaygain_preamp / replaygain_missing_preamp setting.
1396# If replaygain_limit is enabled MPD will never amplify audio signal
1397# above its original level. If replaygain_limit is disabled such amplification
1398# might occur. By default this setting is enabled.
1399#
1400#replaygain_limit "yes"
1401#
1402# This setting enables on-the-fly normalization volume adjustment. This will
1403# result in the volume of all playing audio to be adjusted so the output has
1404# equal "loudness". This setting is disabled by default.
1405#
1406#volume_normalization "no"
1407#
1408###############################################################################
1409
1410# Character Encoding ##########################################################
1411#
1412# If file or directory names do not display correctly for your locale then you
1413# may need to modify this setting.
1414#
1415#filesystem_charset "UTF-8"
1416#
1417###############################################################################
1418#+end_src
1419
1420** msmtp
1421:PROPERTIES:
1422:header-args+: :tangle ~/.msmtprc
1423:END:
1424
1425#+begin_src conf
1426# Set default values for all following accounts.
1427defaults
1428port 587
1429tls on
1430auth on
1431#tls_trust_file /etc/ssl/certs/ca-certificates.crt
1432logfile ~/.msmtp.log
1433
1434# aminb
1435account aminb
1436host nix.aminb.org
1437tls_fingerprint 65:DD:B8:32:D8:CD:F1:DC:B6:34:EE:35:04:18:AC:09:F3:1D:6D:20:F2:4A:E2:BD:64:48:B7:1F:90:BD:C4:BA
1438tls_starttls on
1439from amin@aminb.org
1440user amin@aminb.org
1441passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
1442
1443# gnu
1444account gnu
1445host fencepost.gnu.org
1446tls_fingerprint 94:0E:37:EB:EA:44:5A:4B:B6:6F:16:3D:6C:7E:7E:44:2D:93:61:C1:FE:82:A8:29:5E:3C:12:4E:2D:BE:0E:2C
1447tls_starttls on
1448from aminb@gnu.org
1449user aminb
1450passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
1451
1452# uwaterloo
1453account uwaterloo
1454host connect.uwaterloo.ca
1455tls_starttls on
1456from abandali@uwaterloo.ca
1457user abandali
1458passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
1459tls_trust_file /etc/ssl/certs/ca-certificates.crt
1460
1461# uwaterloo (friendly address)
1462account uwaterloo-friendly : uwaterloo
1463from amin.bandali@uwaterloo.ca
1464
1465# Set a default account
1466account default : aminb
1467#+end_src
1468
1469** ncmpcpp
1470
1471*** config
1472:PROPERTIES:
1473:header-args+: :tangle ~/.ncmpcpp/config
1474:END:
1475
1476#+begin_src conf :tangle no
1477##############################################################
1478## This is the example configuration file. Copy it to ##
1479## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
1480## and set up your preferences. ##
1481##############################################################
1482#
1483##### directories ######
1484##
1485## Directory for storing ncmpcpp related files.
1486## Changing it is useful if you want to store
1487## everything somewhere else and provide command
1488## line setting for alternative location to config
1489## file which defines that while launching ncmpcpp.
1490##
1491#
1492ncmpcpp_directory = ~/.ncmpcpp
1493#
1494##
1495## Directory for storing downloaded lyrics. It
1496## defaults to ~/.lyrics since other MPD clients
1497## (eg. ncmpc) also use that location.
1498##
1499#
1500#lyrics_directory = ~/.lyrics
1501#
1502##### connection settings #####
1503#
1504#mpd_host = localhost
1505#
1506#mpd_port = 6600
1507#
1508#mpd_connection_timeout = 5
1509#
1510## Needed for tag editor and file operations to work.
1511##
1512mpd_music_dir = ~/usr/music
1513#
1514#mpd_crossfade_time = 5
1515#
1516##### music visualizer #####
1517##
1518## Note: In order to make music visualizer work you'll
1519## need to use mpd fifo output, whose format parameter
1520## has to be set to 44100:16:1 for mono visualization
1521## or 44100:16:2 for stereo visualization. Example
1522## configuration (it has to be put into mpd.conf):
1523##
1524## audio_output {
1525## type "fifo"
1526## name "Visualizer feed"
1527## path "/tmp/mpd.fifo"
1528## format "44100:16:2"
1529## }
1530##
1531#
1532visualizer_fifo_path = /tmp/mpd.fifo
1533#
1534##
1535## Note: Below parameter is needed for ncmpcpp
1536## to determine which output provides data for
1537## visualizer and thus allow syncing between
1538## visualization and sound as currently there
1539## are some problems with it.
1540##
1541#
1542visualizer_output_name = my fifo
1543#
1544##
1545## If you set format to 44100:16:2, make it 'yes'.
1546##
1547visualizer_in_stereo = yes
1548#
1549##
1550## Multiply received samples by given value. Very
1551## useful for proper visualization of quiet music.
1552##
1553#visualizer_sample_multiplier = 1
1554#
1555##
1556## Note: Below parameter defines how often ncmpcpp
1557## has to "synchronize" visualizer and audio outputs.
1558## 30 seconds is optimal value, but if you experience
1559## synchronization problems, set it to lower value.
1560## Keep in mind that sane values start with >=10.
1561##
1562#
1563visualizer_sync_interval = 30
1564#
1565##
1566## Note: To enable spectrum frequency visualization
1567## you need to compile ncmpcpp with fftw3 support.
1568##
1569#
1570## Available values: spectrum, wave, wave_filled, ellipse.
1571##
1572visualizer_type = spectrum
1573#
1574#visualizer_look = ●▮
1575visualizer_look = "●•"
1576#
1577#visualizer_color = blue, cyan, green, yellow, magenta, red
1578#
1579## Alternative subset of 256 colors for terminals that support it.
1580##
1581#visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
1582#
1583##### system encoding #####
1584##
1585## ncmpcpp should detect your charset encoding
1586## but if it failed to do so, you can specify
1587## charset encoding you are using here.
1588##
1589## Note: You can see whether your ncmpcpp build
1590## supports charset detection by checking output
1591## of `ncmpcpp --version`.
1592##
1593## Note: Since MPD uses UTF-8 by default, setting
1594## this option makes sense only if your encoding
1595## is different.
1596##
1597#
1598#system_encoding = ""
1599#
1600##### delays #####
1601#
1602## Time of inactivity (in seconds) after playlist
1603## highlighting will be disabled (0 = always on).
1604##
1605#playlist_disable_highlight_delay = 5
1606#
1607## Defines how long messages are supposed to be visible.
1608##
1609#message_delay_time = 5
1610#
1611##### song format #####
1612##
1613## For a song format you can use:
1614##
1615## %l - length
1616## %f - filename
1617## %D - directory
1618## %a - artist
1619## %A - album artist
1620## %t - title
1621## %b - album
1622## %y - date
1623## %n - track number (01/12 -> 01)
1624## %N - full track info (01/12 -> 01/12)
1625## %g - genre
1626## %c - composer
1627## %p - performer
1628## %d - disc
1629## %C - comment
1630## %P - priority
1631## $R - begin right alignment
1632##
1633## If you want to make sure that a part of the format is displayed
1634## only when certain tags are present, you can archieve it by
1635## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
1636## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
1637## It is also possible to define a list of alternatives by providing
1638## several groups and separating them with '|', e.g. '{%t}|{%f}'
1639## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
1640## present.
1641##
1642## Note: If you want to set limit on maximal length of a tag, just
1643## put the appropriate number between % and character that defines
1644## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
1645##
1646## In addition, formats support markers used for text attributes.
1647## They are followed by character '$'. After that you can put:
1648##
1649## - 0 - default window color (discards all other colors)
1650## - 1 - black
1651## - 2 - red
1652## - 3 - green
1653## - 4 - yellow
1654## - 5 - blue
1655## - 6 - magenta
1656## - 7 - cyan
1657## - 8 - white
1658## - 9 - end of current color
1659## - b - bold text
1660## - u - underline text
1661## - r - reverse colors
1662## - a - use alternative character set
1663##
1664## If you don't want to use a non-color attribute anymore, just put it
1665## again, but this time insert character '/' between '$' and attribute
1666## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
1667## or filename with reversed colors.
1668##
1669## If you want to use 256 colors and/or background colors in formats
1670## (the naming scheme is described below in section about color
1671## definitions), it can be done with the syntax $(COLOR), e.g. to set
1672## the artist tag to one of the non-standard colors and make it have
1673## yellow background, you need to write $(197_yellow)%a$(end). Note
1674## that for standard colors this is interchangable with attributes
1675## listed above.
1676##
1677## Note: colors can be nested.
1678##
1679#
1680#song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
1681#
1682#song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
1683#
1684#song_library_format = {%n - }{%t}|{%f}
1685#
1686#
1687#alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
1688#
1689#alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
1690#
1691#now_playing_prefix = $b
1692#
1693#now_playing_suffix = $/b
1694#
1695#browser_playlist_prefix = "$2playlist$9 "
1696#
1697#selected_item_prefix = $6
1698#
1699#selected_item_suffix = $9
1700#
1701#modified_item_prefix = $3> $9
1702#
1703##
1704## Note: attributes are not supported for the following variables.
1705##
1706#song_window_title_format = {%a - }{%t}|{%f}
1707##
1708## Note: Below variables are used for sorting songs in browser.
1709## The sort mode determines how songs are sorted, and can be used
1710## in combination with a sort format to specify a custom sorting format.
1711## Available values for browser_sort_mode are "name", "mtime", "format"
1712## and "noop".
1713##
1714#
1715#browser_sort_mode = name
1716#
1717#browser_sort_format = {%a - }{%t}|{%f} {(%l)}
1718#
1719##### columns settings #####
1720##
1721## syntax of song columns list format is "column column etc."
1722##
1723## - syntax for each column is:
1724##
1725## (width of the column)[color of the column]{displayed tag}
1726##
1727## Note: Width is by default in %, if you want a column to
1728## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
1729## will be the column that take 10% of screen (so the real width
1730## will depend on actual screen size), whereas (10f)[white]{a}
1731## will take 10 terminal cells, no matter how wide the screen is.
1732##
1733## - color is optional (if you want the default one,
1734## leave the field empty).
1735##
1736## Note: You can give a column additional attributes by putting appropriate
1737## character after displayed tag character. Available attributes are:
1738##
1739## - r - column will be right aligned
1740## - E - if tag is empty, empty tag marker won't be displayed
1741##
1742## You can also:
1743##
1744## - give a column custom name by putting it after attributes,
1745## separated with character ':', e.g. {lr:Length} gives you
1746## right aligned column of lengths named "Length".
1747##
1748## - define sequence of tags, that have to be displayed in case
1749## predecessor is empty in a way similar to the one in classic
1750## song format, i.e. using '|' character, e.g. {a|c|p:Owner}
1751## creates column named "Owner" that tries to display artist
1752## tag and then composer and performer if previous ones are
1753## not available.
1754##
1755#
1756#song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
1757#
1758##### various settings #####
1759#
1760##
1761## Note: Custom command that will be executed each
1762## time song changes. Useful for notifications etc.
1763##
1764#execute_on_song_change = ""
1765#
1766#playlist_show_mpd_host = no
1767#
1768#playlist_show_remaining_time = no
1769#
1770#playlist_shorten_total_times = no
1771#
1772#playlist_separate_albums = no
1773#
1774##
1775## Note: Possible display modes: classic, columns.
1776##
1777#playlist_display_mode = columns
1778#
1779#browser_display_mode = classic
1780#
1781#search_engine_display_mode = classic
1782#
1783#playlist_editor_display_mode = classic
1784#
1785#discard_colors_if_item_is_selected = yes
1786#
1787#incremental_seeking = yes
1788#
1789#seek_time = 1
1790#
1791#volume_change_step = 2
1792#
1793#autocenter_mode = no
1794#
1795#centered_cursor = no
1796#
1797##
1798## Note: You can specify third character which will
1799## be used to build 'empty' part of progressbar.
1800##
1801#progressbar_look = =>
1802progressbar_look = "─╼╶"
1803#progressbar_look = "─⊙╶"
1804#
1805#progressbar_boldness = yes
1806#
1807## Available values: database, playlist.
1808##
1809#default_place_to_search_in = database
1810#
1811## Available values: classic, alternative.
1812##
1813#user_interface = classic
1814#
1815#data_fetching_delay = yes
1816#
1817## Available values: artist, album_artist, date, genre, composer, performer.
1818##
1819#media_library_primary_tag = artist
1820#
1821## Available values: wrapped, normal.
1822##
1823#default_find_mode = wrapped
1824#
1825#default_tag_editor_pattern = %n - %t
1826#
1827#header_visibility = yes
1828#
1829#statusbar_visibility = yes
1830#
1831#titles_visibility = yes
1832#
1833#header_text_scrolling = yes
1834#
1835#cyclic_scrolling = no
1836#
1837#lines_scrolled = 2
1838#
1839#follow_now_playing_lyrics = no
1840#
1841#fetch_lyrics_for_current_song_in_background = no
1842#
1843#store_lyrics_in_song_dir = no
1844#
1845#generate_win32_compatible_filenames = yes
1846#
1847#allow_for_physical_item_deletion = no
1848#
1849##
1850## Note: If you set this variable, ncmpcpp will try to
1851## get info from last.fm in language you set and if it
1852## fails, it will fall back to english. Otherwise it will
1853## use english the first time.
1854##
1855## Note: Language has to be expressed as an ISO 639 alpha-2 code.
1856##
1857#lastfm_preferred_language = en
1858#
1859#show_hidden_files_in_local_browser = no
1860#
1861##
1862## How shall screen switcher work?
1863##
1864## - "previous" - switch between the current and previous screen.
1865## - "screen1,...,screenN" - switch between given sequence of screens.
1866##
1867## Screens available for use: help, playlist, browser, search_engine,
1868## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
1869##
1870#screen_switcher_mode = playlist, browser
1871#
1872##
1873## Note: You can define startup screen
1874## by choosing screen from the list above.
1875##
1876#startup_screen = playlist
1877#
1878##
1879## Note: You can define startup slave screen
1880## by choosing screen from the list above or
1881## an empty value for no slave screen.
1882##
1883#startup_slave_screen = ""
1884#
1885#startup_slave_screen_focus = no
1886#
1887##
1888## Default width of locked screen (in %).
1889## Acceptable values are from 20 to 80.
1890##
1891#
1892#locked_screen_width_part = 50
1893#
1894#ask_for_locked_screen_width_part = yes
1895#
1896#jump_to_now_playing_song_at_start = yes
1897#
1898#ask_before_clearing_playlists = yes
1899#
1900#clock_display_seconds = no
1901#
1902#display_volume_level = yes
1903#
1904#display_bitrate = no
1905#
1906#display_remaining_time = no
1907#
1908## Available values: none, basic, extended, perl.
1909##
1910#regular_expressions = perl
1911#
1912##
1913## Note: If below is enabled, ncmpcpp will ignore leading
1914## "The" word while sorting items in browser, tags in
1915## media library, etc.
1916##
1917#ignore_leading_the = no
1918#
1919#block_search_constraints_change_if_items_found = yes
1920#
1921#mouse_support = yes
1922#
1923#mouse_list_scroll_whole_page = yes
1924#
1925#empty_tag_marker = <empty>
1926#
1927#tags_separator = " | "
1928#
1929#tag_editor_extended_numeration = no
1930#
1931#media_library_sort_by_mtime = no
1932#
1933#enable_window_title = yes
1934#
1935##
1936## Note: You can choose default search mode for search
1937## engine. Available modes are:
1938##
1939## - 1 - use mpd built-in searching (no regexes, pattern matching)
1940## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
1941## but if your mpd is on a remote machine, downloading big database
1942## to process it can take a while
1943## - 3 - match only exact values (this mode uses mpd function for searching
1944## in database and local one for searching in current playlist)
1945##
1946#
1947#search_engine_default_search_mode = 1
1948#
1949#external_editor = nano
1950#
1951## Note: set to yes if external editor is a console application.
1952##
1953#use_console_editor = yes
1954#
1955##### colors definitions #####
1956##
1957## It is possible to set a background color by setting a color
1958## value "<foreground>_<background>", e.g. red_black will set
1959## foregound color to red and background color to black.
1960##
1961## In addition, for terminals that support 256 colors it
1962## is possible to set one of them by using a number in range
1963## [1, 256] instead of color name, e.g. numerical value
1964## corresponding to red_black is 2_1. To find out if the
1965## terminal supports 256 colors, run ncmpcpp and check out
1966## the bottom of the help screen for list of available colors
1967## and their numerical values.
1968##
1969## Note: due to technical limitations of ncurses, if 256 colors
1970## are used, it is possible to either use only the colors with
1971## default background color, or all pairs from 1_1 up to 254_127,
1972## depending on the ncurses version used.
1973##
1974#
1975#colors_enabled = yes
1976#
1977#empty_tag_color = cyan
1978#
1979#header_window_color = default
1980#
1981#volume_color = default
1982#
1983#state_line_color = default
1984#
1985#state_flags_color = default
1986#
1987#main_window_color = yellow
1988#
1989#color1 = white
1990#
1991#color2 = green
1992#
1993#main_window_highlight_color = yellow
1994#
1995#progressbar_color = black
1996#
1997#progressbar_elapsed_color = green
1998#
1999#statusbar_color = default
2000#
2001#alternative_ui_separator_color = black
2002#
2003#active_column_color = red
2004#
2005#window_border_color = green
2006#
2007#active_window_border = red
2008#
2009#+end_src
2010
2011*** bindings
2012:PROPERTIES:
2013:header-args+: :tangle ~/.ncmpcpp/bindings
2014:END:
2015
2016#+begin_src conf :tangle no
2017def_key "j"
2018 scroll_down
2019def_key "k"
2020 scroll_up
2021
2022def_key "ctrl-u"
2023 page_up
2024def_key "ctrl-d"
2025 page_down
2026
2027def_key "h"
2028 previous_column
2029def_key "l"
2030 next_column
2031
2032def_key "."
2033 show_lyrics
2034
2035def_key "n"
2036 next_found_item
2037def_key "N"
2038 previous_found_item
2039
2040def_key "J"
2041 move_sort_order_down
2042def_key "K"
2043 move_sort_order_up
2044#+end_src
2045
2046** notmuch
2047
2048*** notmuch-config
2049:PROPERTIES:
2050:header-args+: :tangle ~/.notmuch-config
2051:END:
2052
2053#+begin_src conf
2054# .notmuch-config - Configuration file for the notmuch mail system
2055#
2056# For more information about notmuch, see https://notmuchmail.org
2057
2058# Database configuration
2059#
2060# The only value supported here is 'path' which should be the top-level
2061# directory where your mail currently exists and to where mail will be
2062# delivered in the future. Files should be individual email messages.
2063# Notmuch will store its database within a sub-directory of the path
2064# configured here named ".notmuch".
2065#
2066[database]
2067path=/home/amin/mail
2068
2069# User configuration
2070#
2071# Here is where you can let notmuch know how you would like to be
2072# addressed. Valid settings are
2073#
2074# name Your full name.
2075# primary_email Your primary email address.
2076# other_email A list (separated by ';') of other email addresses
2077# at which you receive email.
2078#
2079# Notmuch will use the various email addresses configured here when
2080# formatting replies. It will avoid including your own addresses in the
2081# recipient list of replies, and will set the From address based on the
2082# address to which the original email was addressed.
2083#
2084[user]
2085name=Amin Bandali
2086primary_email=amin@aminb.org
2087other_email=abandali@uwaterloo.ca;amin.bandali@uwaterloo.ca;aminb@gnu.org;
2088
2089# Configuration for "notmuch new"
2090#
2091# The following options are supported here:
2092#
2093# tags A list (separated by ';') of the tags that will be
2094# added to all messages incorporated by "notmuch new".
2095#
2096# ignore A list (separated by ';') of file and directory names
2097# that will not be searched for messages by "notmuch new".
2098#
2099# NOTE: *Every* file/directory that goes by one of those
2100# names will be ignored, independent of its depth/location
2101# in the mail store.
2102#
2103[new]
2104tags=new;
2105#tags=unread;inbox;
2106ignore=.uidvalidity;.mbsyncstate
2107
2108# Search configuration
2109#
2110# The following option is supported here:
2111#
2112# exclude_tags
2113# A ;-separated list of tags that will be excluded from
2114# search results by default. Using an excluded tag in a
2115# query will override that exclusion.
2116#
2117[search]
2118exclude_tags=deleted;spam;
2119
2120# Maildir compatibility configuration
2121#
2122# The following option is supported here:
2123#
2124# synchronize_flags Valid values are true and false.
2125#
2126# If true, then the following maildir flags (in message filenames)
2127# will be synchronized with the corresponding notmuch tags:
2128#
2129# Flag Tag
2130# ---- -------
2131# D draft
2132# F flagged
2133# P passed
2134# R replied
2135# S unread (added when 'S' flag is not present)
2136#
2137# The "notmuch new" command will notice flag changes in filenames
2138# and update tags, while the "notmuch tag" and "notmuch restore"
2139# commands will notice tag changes and update flags in filenames
2140#
2141[maildir]
2142synchronize_flags=true
2143
2144# Cryptography related configuration
2145#
2146# The following option is supported here:
2147#
2148# gpg_path
2149# binary name or full path to invoke gpg.
2150#
2151[crypto]
2152gpg_path=gpg
2153#+end_src
2154
2155*** post-new hook
2156:PROPERTIES:
2157:header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
2158:END:
2159
2160#+begin_src sh
2161afew -tn
2162
2163# apply tags to lists
2164notmuch tag +lists +lists/deepspec -- folder:amin/lists/deepspec
2165notmuch tag +lists +lists/haskell-cafe -- folder:amin/lists/haskell-cafe
2166notmuch tag +lists +lists/haskell-weekly -- folder:amin/lists/haskell-weekly
2167notmuch tag +lists +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
2168notmuch tag +lists +lists/notmuch -- folder:amin/lists/notmuch
2169notmuch tag +lists +lists/info-gnu-emacs -- folder:amin/lists/info-gnu-emacs
2170notmuch tag +lists +lists/help-gnu-emacs -- folder:amin/lists/help-gnu-emacs
2171notmuch tag +lists +lists/emacs-devel -- folder:amin/lists/emacs-devel
2172#+end_src
2173
2174*** notmuch.service
2175:PROPERTIES:
2176:header-args+: :tangle ~/.config/systemd/user/notmuch.service
2177:END:
2178
2179#+begin_src conf :tangle no
2180[Unit]
2181Description=notmuch service
2182
2183[Service]
2184Type=oneshot
2185ExecStart=/usr/bin/notmuch new
2186StandardOutput=syslog
2187StandardError=syslog
2188#+end_src
2189
2190*** notmuch.timer
2191:PROPERTIES:
2192:header-args+: :tangle ~/.config/systemd/user/notmuch.timer
2193:END:
2194
2195#+begin_src conf :tangle no
2196[Unit]
2197Description=notmuch timer
2198
2199[Timer]
2200OnCalendar=*:0/5
2201Persistent=true
2202Unit=notmuch.service
2203
2204[Install]
2205WantedBy=timers.target
2206#+end_src
2207
2208** offlineimap
2209
2210*** offlineimaprc
2211:PROPERTIES:
2212:header-args+: :tangle ~/.offlineimaprc
2213:END:
2214
2215#+begin_src conf :tangle no
2216[general]
2217pythonfile = ~/.offlineimap.py
2218accounts = Gmail, aminb
2219maxsyncaccounts = 3
2220
2221[Account Gmail]
2222localrepository = GmailL
2223remoterepository = GmailR
2224
2225[Account aminb]
2226localrepository = aminbL
2227remoterepository = aminbR
2228
2229[Repository GmailL]
2230type = Maildir
2231localfolders = ~/Maildir/Gmail
2232
2233[Repository GmailR]
2234type = IMAP
2235remotehost = imap.gmail.com
2236remoteusereval = mailuser("gmail")
2237remotepasseval = mailpasswd("gmail")
2238sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2239ssl = yes
2240folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
2241maxconnections = 1
2242realdelete = no
2243
2244[Repository aminbL]
2245type = Maildir
2246localfolders = ~/Maildir/aminb
2247
2248[Repository aminbR]
2249type = IMAP
2250remotehost = mail.aminb.org
2251remoteusereval = mailuser("aminb")
2252remotepasseval = mailpasswd("aminb")
2253sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2254ssl = yes
2255folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
2256maxconnections = 1
2257realdelete = no
2258#+end_src
2259
2260*** offlineimap.py
2261:PROPERTIES:
2262:header-args+: :tangle ~/.offlineimap.py
2263:END:
2264
2265#+begin_src python :tangle no
2266import os
2267import subprocess
2268
2269def mailpasswd(acct):
2270 acct = os.path.basename(acct)
2271 path = "/home/amin/.passwd/%s.gpg" % acct
2272 args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
2273 try:
2274 return subprocess.check_output(args).strip()
2275 except subprocess.CalledProcessError:
2276 return ""
2277
2278def mailuser(acct):
2279 acct = os.path.basename(acct)
2280 path = "/home/amin/.passwd/%s" % acct
2281 args = ["cat", path]
2282 try:
2283 return subprocess.check_output(args).strip()
2284 except subprocess.CalledProcessError:
2285 return ""
2286
2287def prime_gpg_agent():
2288 ret = False
2289 i = 1
2290 while not ret:
2291 ret = (mailpasswd("prime") == "prime")
2292 if i > 2:
2293 from offlineimap.ui import getglobalui
2294 sys.stderr.write("Error reading in passwords. Terminating.\n")
2295 getglobalui().terminate()
2296 i += 1
2297 return ret
2298
2299prime_gpg_agent()
2300#+end_src
2301
2302** polybar
2303
2304*** config
2305:PROPERTIES:
2306:header-args+: :tangle ~/.config/polybar/config
2307:END:
2308
2309#+begin_src conf :tangle no
2310;=====================================================
2311;
2312; To learn more about how to configure Polybar
2313; go to https://github.com/jaagr/polybar
2314;
2315; The README contains alot of information
2316;
2317;=====================================================
2318
2319[colors]
2320;background = ${xrdb:color0:#222}
2321background = #222
2322background-alt = #444
2323;foreground = ${xrdb:color7:#222}
2324foreground = #eee
2325foreground-alt = #888
2326primary = #ffb52a
2327secondary = #e60053
2328alert = #bd2c40
2329
2330[bar/main]
2331;monitor = ${env:MONITOR:HDMI-1}
2332width = 100%
2333height = 27
2334;offset-x = 1%
2335;offset-y = 1%
2336radius = 3.0
2337fixed-center = true
2338
2339background = ${colors.background}
2340foreground = ${colors.foreground}
2341
2342line-size = 3
2343line-color = #f00
2344
2345border-size = 4
2346border-color = #00000000
2347
2348padding-left = 0
2349padding-right = 2
2350
2351module-margin-left = 2
2352module-margin-right = 2
2353
2354font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
2355font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
2356font-2 = Wuncon Siji:pixelsize=10;1
2357font-3 = FontAwesome:pixelsize=10;1
2358
2359modules-left = bspwm xwindow
2360modules-center =
2361modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
2362
2363tray-position = right
2364tray-padding = 1
2365;tray-transparent = true
2366;tray-background = #0063ff
2367tray-maxsize = 18
2368
2369wm-restack = bspwm
2370
2371;override-redirect = true
2372
2373scroll-up = bspwm-desknext
2374scroll-down = bspwm-deskprev
2375
2376[module/xwindow]
2377type = internal/xwindow
2378label = %title:0:50:...%
2379
2380[module/xkeyboard]
2381type = internal/xkeyboard
2382blacklist-0 = num lock
2383
2384format-prefix = " "
2385format-prefix-foreground = ${colors.foreground-alt}
2386format-prefix-underline = ${colors.secondary}
2387
2388label-layout = %layout%
2389label-layout-underline = ${colors.secondary}
2390
2391label-indicator-padding = 2
2392label-indicator-margin = 1
2393label-indicator-background = ${colors.secondary}
2394label-indicator-underline = ${colors.secondary}
2395
2396[module/filesystem]
2397type = internal/fs
2398interval = 25
2399
2400mount-0 = /
2401
2402label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
2403label-unmounted = %mountpoint% not mounted
2404label-unmounted-foreground = ${colors.foreground-alt}
2405
2406[module/bspwm]
2407type = internal/bspwm
2408
2409label-focused = %index%
2410label-focused-background = ${colors.background-alt}
2411label-focused-underline= ${colors.primary}
2412label-focused-padding = 2
2413
2414label-occupied = %index%
2415label-occupied-padding = 2
2416
2417label-urgent = %index%!
2418label-urgent-background = ${colors.alert}
2419label-urgent-padding = 2
2420
2421label-empty = %index%
2422label-empty-foreground = ${colors.foreground-alt}
2423label-empty-padding = 2
2424
2425[module/i3]
2426type = internal/i3
2427format = <label-state> <label-mode>
2428index-sort = true
2429wrapping-scroll = false
2430
2431; Only show workspaces on the same output as the bar
2432;pin-workspaces = true
2433
2434label-mode-padding = 2
2435label-mode-foreground = #000
2436label-mode-background = ${colors.primary}
2437
2438; focused = Active workspace on focused monitor
2439label-focused = %index%
2440label-focused-background = ${module/bspwm.label-focused-background}
2441label-focused-underline = ${module/bspwm.label-focused-underline}
2442label-focused-padding = ${module/bspwm.label-focused-padding}
2443
2444; unfocused = Inactive workspace on any monitor
2445label-unfocused = %index%
2446label-unfocused-padding = ${module/bspwm.label-occupied-padding}
2447
2448; visible = Active workspace on unfocused monitor
2449label-visible = %index%
2450label-visible-background = ${self.label-focused-background}
2451label-visible-underline = ${self.label-focused-underline}
2452label-visible-padding = ${self.label-focused-padding}
2453
2454; urgent = Workspace with urgency hint set
2455label-urgent = %index%
2456label-urgent-background = ${module/bspwm.label-urgent-background}
2457label-urgent-padding = ${module/bspwm.label-urgent-padding}
2458
2459[module/mpd]
2460type = internal/mpd
2461format-online = <label-song> <icon-prev> <icon-stop> <toggle> <icon-next>
2462
2463icon-prev = 
2464icon-stop = 
2465icon-play = 
2466icon-pause = 
2467icon-next = 
2468
2469label-song-maxlen = 25
2470label-song-ellipsis = true
2471
2472[module/xbacklight]
2473type = internal/xbacklight
2474
2475format = <label> <bar>
2476label = BL
2477
2478bar-width = 10
2479bar-indicator = |
2480bar-indicator-foreground = #ff
2481bar-indicator-font = 2
2482bar-fill = ─
2483bar-fill-font = 2
2484bar-fill-foreground = #9f78e1
2485bar-empty = ─
2486bar-empty-font = 2
2487bar-empty-foreground = ${colors.foreground-alt}
2488
2489[module/backlight-acpi]
2490inherit = module/xbacklight
2491type = internal/backlight
2492;card = intel_backlight
2493card = mba6x_backlight
2494
2495[module/cpu]
2496type = internal/cpu
2497interval = 2
2498format-prefix = " "
2499format-prefix-foreground = ${colors.foreground-alt}
2500format-underline = #f90000
2501label = %percentage%%
2502
2503[module/memory]
2504type = internal/memory
2505interval = 2
2506format-prefix = " "
2507format-prefix-foreground = ${colors.foreground-alt}
2508format-underline = #4bffdc
2509label = %percentage_used%%
2510
2511[module/wlan]
2512type = internal/network
2513interface =
2514interval = 3.0
2515
2516format-connected = <ramp-signal> <label-connected>
2517format-connected-underline = #9f78e1
2518label-connected = %essid%
2519
2520format-disconnected =
2521;format-disconnected = <label-disconnected>
2522;format-disconnected-underline = ${self.format-connected-underline}
2523;label-disconnected = %ifname% disconnected
2524;label-disconnected-foreground = ${colors.foreground-alt}
2525
2526ramp-signal-0 = 
2527ramp-signal-1 = 
2528ramp-signal-2 = 
2529ramp-signal-3 = 
2530ramp-signal-4 = 
2531ramp-signal-foreground = ${colors.foreground-alt}
2532
2533[module/eth]
2534type = internal/network
2535interface =
2536interval = 3.0
2537
2538format-connected-underline = #55aa55
2539format-connected-prefix = " "
2540format-connected-prefix-foreground = ${colors.foreground-alt}
2541label-connected = %local_ip%
2542
2543format-disconnected =
2544;format-disconnected = <label-disconnected>
2545;format-disconnected-underline = ${self.format-connected-underline}
2546;label-disconnected = %ifname% disconnected
2547;label-disconnected-foreground = ${colors.foreground-alt}
2548
2549[module/date]
2550type = internal/date
2551interval = 5
2552
2553date =
2554date-alt = " %Y-%m-%d"
2555
2556time = %H:%M
2557time-alt = %H:%M:%S
2558
2559format-prefix = 
2560format-prefix-foreground = ${colors.foreground-alt}
2561format-underline = #0a6cf5
2562
2563label = %date% %time%
2564
2565[module/volume]
2566type = internal/volume
2567
2568format-volume = <label-volume> <bar-volume>
2569label-volume = vol
2570label-volume-foreground = ${root.foreground}
2571
2572format-muted-prefix = " "
2573format-muted-foreground = ${colors.foreground-alt}
2574label-muted = mute
2575
2576bar-volume-width = 10
2577bar-volume-foreground-0 = #55aa55
2578bar-volume-foreground-1 = #55aa55
2579bar-volume-foreground-2 = #55aa55
2580bar-volume-foreground-3 = #55aa55
2581bar-volume-foreground-4 = #55aa55
2582bar-volume-foreground-5 = #f5a70a
2583bar-volume-foreground-6 = #ff5555
2584bar-volume-gradient = false
2585bar-volume-indicator = |
2586bar-volume-indicator-font = 2
2587bar-volume-fill = ─
2588bar-volume-fill-font = 2
2589bar-volume-empty = ─
2590bar-volume-empty-font = 2
2591bar-volume-empty-foreground = ${colors.foreground-alt}
2592
2593[module/battery]
2594type = internal/battery
2595battery = BAT0
2596adapter = ADP1
2597full-at = 64
2598
2599format-charging = <animation-charging> <label-charging>
2600format-charging-underline = #ffb52a
2601
2602format-discharging = <ramp-capacity> <label-discharging>
2603format-discharging-underline = ${self.format-charging-underline}
2604
2605format-full-prefix = " "
2606format-full-prefix-foreground = ${colors.foreground-alt}
2607format-full-underline = ${self.format-charging-underline}
2608
2609ramp-capacity-0 = 
2610ramp-capacity-1 = 
2611ramp-capacity-2 = 
2612ramp-capacity-foreground = ${colors.foreground-alt}
2613
2614animation-charging-0 = 
2615animation-charging-1 = 
2616animation-charging-2 = 
2617animation-charging-foreground = ${colors.foreground-alt}
2618animation-charging-framerate = 750
2619
2620[module/temperature]
2621type = internal/temperature
2622thermal-zone = 1
2623warn-temperature = 66
2624
2625format = <ramp> <label>
2626format-underline = #f50a4d
2627format-warn = <ramp> <label-warn>
2628format-warn-underline = ${self.format-underline}
2629
2630label = %temperature%
2631label-warn = %temperature%
2632label-warn-foreground = ${colors.secondary}
2633
2634ramp-0 = 
2635ramp-1 = 
2636ramp-2 = 
2637ramp-foreground = ${colors.foreground-alt}
2638
2639[module/powermenu]
2640type = custom/menu
2641
2642format-spacing = 1
2643
2644label-open = 
2645label-open-foreground = ${colors.secondary}
2646label-close =  cancel
2647label-close-foreground = ${colors.secondary}
2648label-separator = |
2649label-separator-foreground = ${colors.foreground-alt}
2650
2651menu-0-0 = reboot
2652menu-0-0-exec = menu-open-1
2653menu-0-1 = power off
2654menu-0-1-exec = menu-open-2
2655
2656menu-1-0 = cancel
2657menu-1-0-exec = menu-open-0
2658menu-1-1 = reboot
2659menu-1-1-exec = sudo reboot
2660
2661menu-2-0 = power off
2662menu-2-0-exec = sudo poweroff
2663menu-2-1 = cancel
2664menu-2-1-exec = menu-open-0
2665
2666[module/mail]
2667type = custom/script
2668interval = 60
2669format = <label>
2670format-prefix = " "
2671format-prefix-foreground = ${colors.foreground-alt}
2672format-underline = #0a6cf5
2673exec = notmuch count tag:unread
2674
2675[settings]
2676screenchange-reload = true
2677;compositing-background = xor
2678;compositing-background = screen
2679;compositing-foreground = source
2680;compositing-border = over
2681
2682[global/wm]
2683margin-top = 0
2684margin-bottom = 0
2685
2686; vim:ft=dosini
2687#+end_src
2688
2689*** polybar-launch
2690:PROPERTIES:
2691:header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
2692:END:
2693
2694#+begin_src sh :tangle no
2695# Terminate already running bar instances
2696killall -q polybar
2697
2698# Wait until the processes have been shut down
2699while pgrep -x polybar >/dev/null; do sleep 1; done
2700
2701# Launch main bar
2702polybar main &
2703
2704echo "Bars launched..."
2705#+end_src
2706
2707** PowerTOP
2708:PROPERTIES:
2709:header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
2710:END:
2711
2712#+begin_src conf
2713[Unit]
2714Description=Powertop tunings
2715
2716[Service]
2717ExecStart=/usr/bin/powertop --auto-tune
2718RemainAfterExit=true
2719
2720[Install]
2721WantedBy=multi-user.target
2722#+end_src
2723
2724** ranger
2725
2726*** rc.conf
2727:PROPERTIES:
2728:header-args+: :tangle ~/.config/ranger/rc.conf
2729:END:
2730
2731#+begin_src conf :tangle no
2732# ===================================================================
2733# This file contains the default startup commands for ranger.
2734# To change them, it is recommended to create the file
2735# ~/.config/ranger/rc.conf and add your custom commands there.
2736#
2737# If you copy this whole file there, you may want to set the environment
2738# variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
2739#
2740# The purpose of this file is mainly to define keybindings and settings.
2741# For running more complex python code, please create a plugin in "plugins/" or
2742# a command in "commands.py".
2743#
2744# Each line is a command that will be run before the user interface
2745# is initialized. As a result, you can not use commands which rely
2746# on the UI such as :delete or :mark.
2747# ===================================================================
2748
2749# ===================================================================
2750# == Options
2751# ===================================================================
2752
2753# How many columns are there, and what are their relative widths?
2754set column_ratios 1,3,4
2755
2756# Which files should be hidden? (regular expression)
2757set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
2758
2759# Show hidden files? You can toggle this by typing 'zh'
2760set show_hidden false
2761
2762# Ask for a confirmation when running the "delete" command?
2763# Valid values are "always" (default), "never", "multiple"
2764# With "multiple", ranger will ask only if you delete multiple files at once.
2765set confirm_on_delete multiple
2766
2767# Which script is used to generate file previews?
2768# ranger ships with scope.sh, a script that calls external programs (see
2769# README for dependencies) to preview images, archives, etc.
2770set preview_script ~/.config/ranger/scope.sh
2771
2772# Use the external preview script or display simple plain text previews?
2773set use_preview_script true
2774
2775# Open all images in this directory when running certain image viewers
2776# like feh or sxiv? You can still open selected files by marking them.
2777set open_all_images true
2778
2779# Be aware of version control systems and display information.
2780set vcs_aware false
2781
2782# State of the three backends git, hg, bzr. The possible states are
2783# disabled, local (only show local info), enabled (show local and remote
2784# information).
2785set vcs_backend_git enabled
2786set vcs_backend_hg disabled
2787set vcs_backend_bzr disabled
2788
2789# Preview images in full color with the external command "w3mimgpreview"?
2790# This requires the console web browser "w3m" and a supported terminal.
2791# It has been successfully tested with "xterm" and "urxvt" without tmux.
2792set preview_images true
2793
2794# Use a unicode "..." character to mark cut-off filenames?
2795set unicode_ellipsis false
2796
2797# Show dotfiles in the bookmark preview box?
2798set show_hidden_bookmarks true
2799
2800# Which colorscheme to use? These colorschemes are available by default:
2801# default, jungle, snow
2802set colorscheme default
2803
2804# Preview files on the rightmost column?
2805# And collapse (shrink) the last column if there is nothing to preview?
2806set preview_files true
2807set preview_directories true
2808set collapse_preview true
2809
2810# Save the console history on exit?
2811set save_console_history true
2812
2813# Draw the status bar on top of the browser window (default: bottom)
2814set status_bar_on_top false
2815
2816# Draw a progress bar in the status bar which displays the average state of all
2817# currently running tasks which support progress bars?
2818set draw_progress_bar_in_status_bar true
2819
2820# Draw borders around columns?
2821set draw_borders true
2822
2823# Display the directory name in tabs?
2824set dirname_in_tabs false
2825
2826# Enable the mouse support?
2827set mouse_enabled true
2828
2829# Display the file size in the main column or status bar?
2830set display_size_in_main_column true
2831set display_size_in_status_bar true
2832
2833# Display files tags in all columns or only in main column?
2834set display_tags_in_all_columns true
2835
2836# Set a title for the window?
2837set update_title false
2838
2839# Set the title to "ranger" in the tmux program?
2840set update_tmux_title false
2841
2842# Shorten the title if it gets long? The number defines how many
2843# directories are displayed at once, 0 turns off this feature.
2844set shorten_title 3
2845
2846# Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
2847set tilde_in_titlebar false
2848
2849# How many directory-changes or console-commands should be kept in history?
2850set max_history_size 20
2851set max_console_history_size 50
2852
2853# Try to keep so much space between the top/bottom border when scrolling:
2854set scroll_offset 8
2855
2856# Flush the input after each key hit? (Noticable when ranger lags)
2857set flushinput true
2858
2859# Padding on the right when there's no preview?
2860# This allows you to click into the space to run the file.
2861set padding_right true
2862
2863# Save bookmarks (used with mX and `X) instantly?
2864# This helps to synchronize bookmarks between multiple ranger
2865# instances but leads to *slight* performance loss.
2866# When false, bookmarks are saved when ranger is exited.
2867set autosave_bookmarks true
2868
2869# You can display the "real" cumulative size of directories by using the
2870# command :get_cumulative_size or typing "dc". The size is expensive to
2871# calculate and will not be updated automatically. You can choose
2872# to update it automatically though by turning on this option:
2873set autoupdate_cumulative_size false
2874
2875# Turning this on makes sense for screen readers:
2876set show_cursor false
2877
2878# One of: size, basename, mtime, type
2879set sort natural
2880
2881# Additional sorting options
2882set sort_reverse false
2883set sort_case_insensitive true
2884set sort_directories_first true
2885
2886# Enable this if key combinations with the Alt Key don't work for you.
2887# (Especially on xterm)
2888set xterm_alt_key false
2889
2890# ===================================================================
2891# == Local Options
2892# ===================================================================
2893# You can set local options that only affect a single directory.
2894
2895# Examples:
2896# setlocal path=~/downloads sort mtime
2897
2898# ===================================================================
2899# == Command Aliases in the Console
2900# ===================================================================
2901
2902alias e edit
2903alias q quit
2904alias q! quitall
2905alias qall quitall
2906alias setl setlocal
2907
2908alias filter scout -prt
2909alias find scout -aet
2910alias mark scout -mr
2911alias unmark scout -Mr
2912alias search scout -rs
2913alias search_inc scout -rts
2914alias travel scout -aefiklst
2915
2916# ===================================================================
2917# == Define keys for the browser
2918# ===================================================================
2919
2920# Basic
2921map Q quit!
2922map q quit
2923copymap q ZZ ZQ
2924
2925map R reload_cwd
2926map <C-r> reset
2927map <C-l> redraw_window
2928map <C-c> abort
2929map <esc> change_mode normal
2930
2931map i display_file
2932map ? help
2933map W display_log
2934map w taskview_open
2935map S shell $SHELL
2936
2937map : console
2938map ; console
2939map ! console shell
2940map @ console -p6 shell %%s
2941map # console shell -p
2942map s console shell
2943map r chain draw_possible_programs; console open_with
2944map f console find
2945map cd console cd
2946
2947# Tagging / Marking
2948map t tag_toggle
2949map ut tag_remove
2950map "<any> tag_toggle tag=%any
2951map <Space> mark_files toggle=True
2952map v mark_files all=True toggle=True
2953map uv mark_files all=True val=False
2954map V toggle_visual_mode
2955map uV toggle_visual_mode reverse=True
2956
2957# For the nostalgics: Midnight Commander bindings
2958map <F1> help
2959map <F3> display_file
2960map <F4> edit
2961map <F5> copy
2962map <F6> cut
2963map <F7> console mkdir
2964map <F8> console delete
2965map <F10> exit
2966
2967# In case you work on a keyboard with dvorak layout
2968map <UP> move up=1
2969map <DOWN> move down=1
2970map <LEFT> move left=1
2971map <RIGHT> move right=1
2972map <HOME> move to=0
2973map <END> move to=-1
2974map <PAGEDOWN> move down=1 pages=True
2975map <PAGEUP> move up=1 pages=True
2976map <CR> move right=1
2977map <DELETE> console delete
2978map <INSERT> console touch
2979
2980# VIM-like
2981copymap <UP> k
2982copymap <DOWN> j
2983copymap <LEFT> h
2984copymap <RIGHT> l
2985copymap <HOME> gg
2986copymap <END> G
2987copymap <PAGEDOWN> <C-F>
2988copymap <PAGEUP> <C-B>
2989
2990map J move down=0.5 pages=True
2991map K move up=0.5 pages=True
2992copymap J <C-D>
2993copymap K <C-U>
2994
2995# Jumping around
2996map H history_go -1
2997map L history_go 1
2998map ] move_parent 1
2999map [ move_parent -1
3000map } traverse
3001
3002map gh cd ~
3003map ge cd /etc
3004map gu cd /usr
3005map gd cd /dev
3006map gl cd -r .
3007map gL cd -r %f
3008map go cd /opt
3009map gv cd /var
3010map gm cd /media
3011map gM cd /mnt
3012map gs cd /srv
3013map gr cd /
3014map gR eval fm.cd(ranger.RANGERDIR)
3015map g/ cd /
3016map g? cd /usr/share/doc/ranger
3017
3018# External Programs
3019map E edit
3020map du shell -p du --max-depth=1 -h --apparent-size
3021map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
3022map yp shell -d echo -n %d/%f | xsel -i
3023map yd shell -d echo -n %d | xsel -i
3024map yn shell -d echo -n %f | xsel -i
3025
3026# Filesystem Operations
3027map = chmod
3028
3029map cw console rename
3030map A eval fm.open_console('rename ' + fm.thisfile.basename)
3031map I eval fm.open_console('rename ' + fm.thisfile.basename, position=7)
3032
3033map pp paste
3034map po paste overwrite=True
3035map pl paste_symlink relative=False
3036map pL paste_symlink relative=True
3037map phl paste_hardlink
3038map pht paste_hardlinked_subtree
3039
3040map dd cut
3041map ud uncut
3042map da cut mode=add
3043map dr cut mode=remove
3044
3045map yy copy
3046map uy uncut
3047map ya copy mode=add
3048map yr copy mode=remove
3049
3050# Temporary workarounds
3051map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
3052map dG eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
3053map dj eval fm.cut(dirarg=dict(down=1), narg=quantifier)
3054map dk eval fm.cut(dirarg=dict(up=1), narg=quantifier)
3055map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
3056map yG eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
3057map yj eval fm.copy(dirarg=dict(down=1), narg=quantifier)
3058map yk eval fm.copy(dirarg=dict(up=1), narg=quantifier)
3059
3060# Searching
3061map / console search
3062map n search_next
3063map N search_next forward=False
3064map ct search_next order=tag
3065map cs search_next order=size
3066map ci search_next order=mimetype
3067map cc search_next order=ctime
3068map cm search_next order=mtime
3069map ca search_next order=atime
3070
3071# Tabs
3072map <C-n> tab_new ~
3073map <C-w> tab_close
3074map <TAB> tab_move 1
3075map <S-TAB> tab_move -1
3076map <A-Right> tab_move 1
3077map <A-Left> tab_move -1
3078map gt tab_move 1
3079map gT tab_move -1
3080map gn tab_new ~
3081map gc tab_close
3082map uq tab_restore
3083map <a-1> tab_open 1
3084map <a-2> tab_open 2
3085map <a-3> tab_open 3
3086map <a-4> tab_open 4
3087map <a-5> tab_open 5
3088map <a-6> tab_open 6
3089map <a-7> tab_open 7
3090map <a-8> tab_open 8
3091map <a-9> tab_open 9
3092
3093# Sorting
3094map or toggle_option sort_reverse
3095map os chain set sort=size; set sort_reverse=False
3096map ob chain set sort=basename; set sort_reverse=False
3097map on chain set sort=natural; set sort_reverse=False
3098map om chain set sort=mtime; set sort_reverse=False
3099map oc chain set sort=ctime; set sort_reverse=False
3100map oa chain set sort=atime; set sort_reverse=False
3101map ot chain set sort=type; set sort_reverse=False
3102
3103map oS chain set sort=size; set sort_reverse=True
3104map oB chain set sort=basename; set sort_reverse=True
3105map oN chain set sort=natural; set sort_reverse=True
3106map oM chain set sort=mtime; set sort_reverse=True
3107map oC chain set sort=ctime; set sort_reverse=True
3108map oA chain set sort=atime; set sort_reverse=True
3109map oT chain set sort=type; set sort_reverse=True
3110
3111map dc get_cumulative_size
3112
3113# Settings
3114map zc toggle_option collapse_preview
3115map zd toggle_option sort_directories_first
3116map zh toggle_option show_hidden
3117map <C-h> toggle_option show_hidden
3118map zi toggle_option flushinput
3119map zm toggle_option mouse_enabled
3120map zp toggle_option preview_files
3121map zP toggle_option preview_directories
3122map zs toggle_option sort_case_insensitive
3123map zu toggle_option autoupdate_cumulative_size
3124map zv toggle_option use_preview_script
3125map zf console filter
3126
3127# Bookmarks
3128map `<any> enter_bookmark %any
3129map '<any> enter_bookmark %any
3130map m<any> set_bookmark %any
3131map um<any> unset_bookmark %any
3132
3133map m<bg> draw_bookmarks
3134copymap m<bg> um<bg> `<bg> '<bg>
3135
3136# Generate all the chmod bindings with some python help:
3137eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
3138eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
3139eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
3140eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
3141eval for arg in "rwxXst": cmd("map +{0} shell -d chmod u+{0} %s".format(arg))
3142
3143eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
3144eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
3145eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
3146eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
3147eval for arg in "rwxXst": cmd("map -{0} shell -d chmod u-{0} %s".format(arg))
3148
3149# ===================================================================
3150# == Define keys for the console
3151# ===================================================================
3152# Note: Unmapped keys are passed directly to the console.
3153
3154# Basic
3155cmap <tab> eval fm.ui.console.tab()
3156cmap <s-tab> eval fm.ui.console.tab(-1)
3157cmap <ESC> eval fm.ui.console.close()
3158cmap <CR> eval fm.ui.console.execute()
3159cmap <C-l> redraw_window
3160
3161copycmap <ESC> <C-c>
3162copycmap <CR> <C-j>
3163
3164# Move around
3165cmap <up> eval fm.ui.console.history_move(-1)
3166cmap <down> eval fm.ui.console.history_move(1)
3167cmap <left> eval fm.ui.console.move(left=1)
3168cmap <right> eval fm.ui.console.move(right=1)
3169cmap <home> eval fm.ui.console.move(right=0, absolute=True)
3170cmap <end> eval fm.ui.console.move(right=-1, absolute=True)
3171
3172# Line Editing
3173cmap <backspace> eval fm.ui.console.delete(-1)
3174cmap <delete> eval fm.ui.console.delete(0)
3175cmap <C-w> eval fm.ui.console.delete_word()
3176cmap <C-k> eval fm.ui.console.delete_rest(1)
3177cmap <C-u> eval fm.ui.console.delete_rest(-1)
3178cmap <C-y> eval fm.ui.console.paste()
3179
3180# And of course the emacs way
3181copycmap <up> <C-p>
3182copycmap <down> <C-n>
3183copycmap <left> <C-b>
3184copycmap <right> <C-f>
3185copycmap <home> <C-a>
3186copycmap <end> <C-e>
3187copycmap <delete> <C-d>
3188copycmap <backspace> <C-h>
3189
3190# Note: There are multiple ways to express backspaces. <backspace> (code 263)
3191# and <backspace2> (code 127). To be sure, use both.
3192copycmap <backspace> <backspace2>
3193
3194# This special expression allows typing in numerals:
3195cmap <allow_quantifiers> false
3196
3197# ===================================================================
3198# == Pager Keybindings
3199# ===================================================================
3200
3201# Movement
3202pmap <down> pager_move down=1
3203pmap <up> pager_move up=1
3204pmap <left> pager_move left=4
3205pmap <right> pager_move right=4
3206pmap <home> pager_move to=0
3207pmap <end> pager_move to=-1
3208pmap <pagedown> pager_move down=1.0 pages=True
3209pmap <pageup> pager_move up=1.0 pages=True
3210pmap <C-d> pager_move down=0.5 pages=True
3211pmap <C-u> pager_move up=0.5 pages=True
3212
3213copypmap <UP> k <C-p>
3214copypmap <DOWN> j <C-n> <CR>
3215copypmap <LEFT> h
3216copypmap <RIGHT> l
3217copypmap <HOME> g
3218copypmap <END> G
3219copypmap <C-d> d
3220copypmap <C-u> u
3221copypmap <PAGEDOWN> n f <C-F> <Space>
3222copypmap <PAGEUP> p b <C-B>
3223
3224# Basic
3225pmap <ESC> pager_close
3226copypmap <ESC> q Q i <F3>
3227pmap E edit_file
3228
3229# ===================================================================
3230# == Taskview Keybindings
3231# ===================================================================
3232
3233# Movement
3234tmap <up> taskview_move up=1
3235tmap <down> taskview_move down=1
3236tmap <home> taskview_move to=0
3237tmap <end> taskview_move to=-1
3238tmap <pagedown> taskview_move down=1.0 pages=True
3239tmap <pageup> taskview_move up=1.0 pages=True
3240tmap <C-d> taskview_move down=0.5 pages=True
3241tmap <C-u> taskview_move up=0.5 pages=True
3242
3243copytmap <UP> k <C-p>
3244copytmap <DOWN> j <C-n> <CR>
3245copytmap <HOME> g
3246copytmap <END> G
3247copytmap <C-u> u
3248copytmap <PAGEDOWN> n f <C-F> <Space>
3249copytmap <PAGEUP> p b <C-B>
3250
3251# Changing priority and deleting tasks
3252tmap J eval -q fm.ui.taskview.task_move(-1)
3253tmap K eval -q fm.ui.taskview.task_move(0)
3254tmap dd eval -q fm.ui.taskview.task_remove()
3255tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
3256tmap <pageup> eval -q fm.ui.taskview.task_move(0)
3257tmap <delete> eval -q fm.ui.taskview.task_remove()
3258
3259# Basic
3260tmap <ESC> taskview_close
3261copytmap <ESC> q Q w <C-c>
3262#+end_src
3263
3264*** scope.sh
3265:PROPERTIES:
3266:header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
3267:END:
3268
3269#+begin_src sh :tangle no
3270# ranger supports enhanced previews. If the option "use_preview_script"
3271# is set to True and this file exists, this script will be called and its
3272# output is displayed in ranger. ANSI color codes are supported.
3273
3274# NOTES: This script is considered a configuration file. If you upgrade
3275# ranger, it will be left untouched. (You must update it yourself.)
3276# Also, ranger disables STDIN here, so interactive scripts won't work properly
3277
3278# Meanings of exit codes:
3279# code | meaning | action of ranger
3280# -----+------------+-------------------------------------------
3281# 0 | success | success. display stdout as preview
3282# 1 | no preview | failure. display no preview at all
3283# 2 | plain text | display the plain content of the file
3284# 3 | fix width | success. Don't reload when width changes
3285# 4 | fix height | success. Don't reload when height changes
3286# 5 | fix both | success. Don't ever reload
3287
3288# Meaningful aliases for arguments:
3289path="$1" # Full path of the selected file
3290width="$2" # Width of the preview pane (number of fitting characters)
3291height="$3" # Height of the preview pane (number of fitting characters)
3292
3293maxln=200 # Stop after $maxln lines. Can be used like ls | head -n $maxln
3294
3295# Find out something about the file:
3296mimetype=$(file --mime-type -Lb "$path")
3297extension=${path##*.}
3298
3299# Functions:
3300# runs a command and saves its output into $output. Useful if you need
3301# the return value AND want to use the output in a pipe
3302try() { output=$(eval '"$@"'); }
3303
3304# writes the output of the previouosly used "try" command
3305dump() { echo "$output"; }
3306
3307# a common post-processing function used after most commands
3308trim() { head -n "$maxln"; }
3309
3310# wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
3311highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }
3312
3313case "$extension" in
3314 # Archive extensions:
3315 7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
3316 rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
3317 try als "$path" && { dump | trim; exit 0; }
3318 try acat "$path" && { dump | trim; exit 3; }
3319 try bsdtar -lf "$path" && { dump | trim; exit 0; }
3320 exit 1;;
3321 rar)
3322 try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
3323 # PDF documents:
3324 pdf)
3325 try pdftotext -l 10 -nopgbrk -q "$path" - && \
3326 { dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
3327 # BitTorrent Files
3328 torrent)
3329 try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
3330 # HTML Pages:
3331 htm|html|xhtml)
3332 try w3m -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3333 try lynx -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3334 try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3335 ;; # fall back to highlight/cat if the text browsers fail
3336esac
3337
3338case "$mimetype" in
3339 # Syntax highlight for text files:
3340 text/* | */xml)
3341 try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
3342 # Ascii-previews of images:
3343 image/*)
3344 img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
3345 # Display information about media files:
3346 video/* | audio/*)
3347 exiftool "$path" && exit 5
3348 # Use sed to remove spaces so the output fits into the narrow window
3349 try mediainfo "$path" && { dump | trim | sed 's/ \+:/: /;'; exit 5; } || exit 1;;
3350esac
3351
3352exit 1
3353#+end_src
3354
3355** redshift
3356:PROPERTIES:
3357:header-args+: :tangle ~/.config/redshift.conf :comments none
3358:END:
3359
3360#+begin_src conf
3361; Global settings for redshift
3362[redshift]
3363; Set the day and night screen temperatures (Neutral is 6500K)
3364;temp-day=5700
3365;temp-night=3500
3366
3367;temp-day=6500
3368temp-day=6200
3369;temp-night=4800
3370;temp-night=5000
3371;temp-night=4500
3372temp-night=4000
3373
3374; Enable/Disable a smooth transition between day and night
3375; 0 will cause a direct change from day to night screen temperature.
3376; 1 will gradually increase or decrease the screen temperature.
3377transition=1
3378
3379; Set the screen brightness. Default is 1.0.
3380;brightness=0.9
3381; It is also possible to use different settings for day and night
3382; since version 1.8.
3383;brightness-day=0.7
3384;brightness-night=0.4
3385; Set the screen gamma (for all colors, or each color channel
3386; individually)
3387;gamma=0.8
3388;gamma=1.0
3389;gamma=0.8:0.7:0.8
3390; This can also be set individually for day and night since
3391; version 1.10.
3392;gamma-day=0.8:0.7:0.8
3393;gamma-night=0.6
3394
3395; Set the location-provider: 'geoclue2' or 'manual'
3396; type 'redshift -l list' to see possible values.
3397; The location provider settings are in a different section.
3398;location-provider=manual
3399location-provider=geoclue2
3400
3401; Set the adjustment-method: 'randr', 'vidmode'
3402; type 'redshift -m list' to see all possible values.
3403; 'randr' is the preferred method, 'vidmode' is an older API.
3404; but works in some cases when 'randr' does not.
3405; The adjustment method settings are in a different section.
3406adjustment-method=randr
3407
3408; Configuration of the location-provider:
3409; type 'redshift -l PROVIDER:help' to see the settings.
3410; ex: 'redshift -l manual:help'
3411; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
3412; are negative numbers.
3413;[manual]
3414;lat=48.1
3415;lon=11.6
3416
3417; Configuration of the adjustment-method
3418; type 'redshift -m METHOD:help' to see the settings.
3419; ex: 'redshift -m randr:help'
3420; In this example, randr is configured to adjust screen 1.
3421; Note that the numbering starts from 0, so this is actually the
3422; second screen. If this option is not specified, Redshift will try
3423; to adjust _all_ screens.
3424;[randr]
3425;screen=1
3426#+end_src
3427
3428** rofi
3429:PROPERTIES:
3430:header-args+: :tangle ~/.config/rofi/config
3431:END:
3432
3433#+begin_src conf
3434rofi.font: Ubuntu Mono 13
3435! rofi.font: Inconsolata 16
3436! rofi.font: Iosevka 13
3437! rofi.font: Source Code Pro 11
3438rofi.modi: run,window
3439! rofi.width: 640
3440rofi.width: 600
3441!rofi.location: 2
3442!rofi.yoffset: 200
3443rofi.monitor: -1
3444!rofi.lines: 10
3445
3446!rofi.theme: /usr/share/rofi/themes//Arc.rasi
3447!rofi.theme: /usr/share/rofi/themes//Paper.rasi
3448!rofi.theme: /usr/share/rofi/themes//sidebar.rasi
3449
3450rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
3451#+end_src
3452
3453** rofi-pass
3454:PROPERTIES:
3455:header-args+: :tangle ~/.config/rofi-pass/config
3456:END:
3457
3458#+begin_src conf
3459# permanently set alternative root dir
3460# root=/path/to/root
3461
3462# rofi command. Make sure to have "$@" as last argument
3463_rofi () {
3464 #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
3465 rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
3466}
3467
3468# xdotool needs the keyboard layout to be set using setxkbmap
3469# You can do this in your autostart scripts (e.g. xinitrc)
3470
3471# If for some reason, you cannot do this, you can set the command here.
3472# and set fix_layout to true
3473fix_layout=false
3474
3475layout_cmd () {
3476 setxkbmap us
3477}
3478
3479# fields to be used
3480URL_field='url'
3481USERNAME_field='user'
3482AUTOTYPE_field='autotype'
3483
3484# delay to be used for :delay keyword
3485delay=2
3486
3487## Programs to be used
3488# Editor
3489EDITOR='gvim -f'
3490
3491# Browser
3492BROWSER='chromium'
3493
3494## Misc settings
3495
3496default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
3497auto_enter='false'
3498notify='false'
3499default_autotype='user :tab pass'
3500
3501# color of the help messages
3502# leave empty for autodetection
3503help_color="#4872FF"
3504
3505# Clipboard settings
3506# Possible options: primary, clipboard, both
3507clip=primary
3508
3509# Options for generating new password entries
3510# default_user is also used for password files that have no user field.
3511default_user=aminb
3512default_user2=aminban
3513password_length=30
3514
3515# Custom Keybindings
3516#autotype="Alt+1"
3517autotype="Alt+m"
3518type_user="Alt+2"
3519type_pass="Alt+3"
3520open_url="Alt+4"
3521copy_name="Alt+u"
3522copy_url="Alt+l"
3523copy_pass="Alt+p"
3524show="Alt+o"
3525copy_entry="Alt+2"
3526type_entry="Alt+1"
3527copy_menu="Alt+c"
3528action_menu="Alt+a"
3529type_menu="Alt+t"
3530help="Alt+h"
3531switch="Alt+x"
3532insert_pass="Alt+n"
3533#+end_src
3534
3535** TLP
3536
3537*** TODO enigma
3538*** plasma
3539
3540#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/default/tlp")
3541# ------------------------------------------------------------------------------
3542# tlp - Parameters for power saving
3543# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
3544
3545# Hint: some features are disabled by default, remove the leading # to enable
3546# them.
3547
3548# Set to 0 to disable, 1 to enable TLP.
3549TLP_ENABLE=1
3550
3551# Operation mode when no power supply can be detected: AC, BAT.
3552# Concerns some desktop and embedded hardware only.
3553TLP_DEFAULT_MODE=AC
3554
3555# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
3556# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
3557TLP_PERSISTENT_DEFAULT=0
3558
3559# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
3560# Non-zero value enables, zero disables laptop mode.
3561DISK_IDLE_SECS_ON_AC=0
3562DISK_IDLE_SECS_ON_BAT=2
3563
3564# Dirty page values (timeouts in secs).
3565MAX_LOST_WORK_SECS_ON_AC=15
3566MAX_LOST_WORK_SECS_ON_BAT=60
3567
3568# Hint: CPU parameters below are disabled by default, remove the leading #
3569# to enable them, otherwise kernel default values are used.
3570
3571# Select a CPU frequency scaling governor.
3572# Intel Core i processor with intel_pstate driver:
3573# powersave(*), performance.
3574# Older hardware with acpi-cpufreq driver:
3575# ondemand(*), powersave, performance, conservative, schedutil.
3576# (*) is recommended.
3577# Hint: use tlp-stat -p to show the active driver and available governors.
3578# Important:
3579# powersave for intel_pstate and ondemand for acpi-cpufreq are power
3580# efficient for *almost all* workloads and therefore kernel and most
3581# distributions have chosen them as defaults. If you still want to change,
3582# you should know what you're doing! You *must* disable your distribution's
3583# governor settings or conflicts will occur.
3584#CPU_SCALING_GOVERNOR_ON_AC=powersave
3585#CPU_SCALING_GOVERNOR_ON_BAT=powersave
3586
3587# Set the min/max frequency available for the scaling governor.
3588# Possible values strongly depend on your CPU. For available frequencies see
3589# the output of tlp-stat -p.
3590#CPU_SCALING_MIN_FREQ_ON_AC=0
3591#CPU_SCALING_MAX_FREQ_ON_AC=0
3592#CPU_SCALING_MIN_FREQ_ON_BAT=0
3593#CPU_SCALING_MAX_FREQ_ON_BAT=0
3594
3595# Set energy performance hints (HWP) for Intel P-state governor:
3596# performance, balance_performance, default, balance_power, power
3597# Values are given in order of increasing power saving.
3598# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
3599CPU_HWP_ON_AC=balance_performance
3600CPU_HWP_ON_BAT=balance_power
3601
3602# Set Intel P-state performance: 0..100 (%).
3603# Limit the max/min P-state to control the power dissipation of the CPU.
3604# Values are stated as a percentage of the available performance.
3605# Requires an Intel Core i processor with intel_pstate driver.
3606#CPU_MIN_PERF_ON_AC=0
3607#CPU_MAX_PERF_ON_AC=100
3608#CPU_MIN_PERF_ON_BAT=0
3609#CPU_MAX_PERF_ON_BAT=30
3610
3611# Set the CPU "turbo boost" feature: 0=disable, 1=allow
3612# Requires an Intel Core i processor.
3613# Important:
3614# - This may conflict with your distribution's governor settings
3615# - A value of 1 does *not* activate boosting, it just allows it
3616#CPU_BOOST_ON_AC=1
3617#CPU_BOOST_ON_BAT=0
3618
3619# Minimize number of used CPU cores/hyper-threads under light load conditions:
3620# 0=disable, 1=enable.
3621SCHED_POWERSAVE_ON_AC=0
3622SCHED_POWERSAVE_ON_BAT=1
3623
3624# Kernel NMI Watchdog:
3625# 0=disable (default, saves power), 1=enable (for kernel debugging only).
3626NMI_WATCHDOG=0
3627
3628# Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
3629# Frequency voltage pairs are written to:
3630# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
3631# CAUTION: only use this, if you thoroughly understand what you are doing!
3632#PHC_CONTROLS="F:V F:V F:V F:V"
3633
3634# Set CPU performance versus energy savings policy:
3635# performance, balance-performance, default, balance-power, power.
3636# Values are given in order of increasing power saving.
3637# Requires kernel module msr and x86_energy_perf_policy from linux-tools.
3638ENERGY_PERF_POLICY_ON_AC=performance
3639ENERGY_PERF_POLICY_ON_BAT=balance-power
3640
3641# Disk devices; separate multiple devices with spaces (default: sda).
3642# Devices can be specified by disk ID also (lookup with: tlp diskid).
3643DISK_DEVICES="sda sdb"
3644
3645# Disk advanced power management level: 1..254, 255 (max saving, min, off).
3646# Levels 1..127 may spin down the disk; 255 allowable on most drives.
3647# Separate values for multiple disks with spaces. Use the special value 'keep'
3648# to keep the hardware default for the particular disk.
3649DISK_APM_LEVEL_ON_AC="254 254"
3650DISK_APM_LEVEL_ON_BAT="128 128"
3651
3652# Hard disk spin down timeout:
3653# 0: spin down disabled
3654# 1..240: timeouts from 5s to 20min (in units of 5s)
3655# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
3656# See 'man hdparm' for details.
3657# Separate values for multiple disks with spaces. Use the special value 'keep'
3658# to keep the hardware default for the particular disk.
3659#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
3660#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
3661
3662# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
3663# Separate values for multiple disks with spaces. Use the special value 'keep'
3664# to keep the kernel default scheduler for the particular disk.
3665#DISK_IOSCHED="cfq cfq"
3666
3667# AHCI link power management (ALPM) for disk devices:
3668# min_power, med_power_with_dipm(*), medium_power, max_performance.
3669# (*) Kernel >= 4.15 required, then recommended.
3670# Multiple values separated with spaces are tried sequentially until success.
3671SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
3672SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
3673
3674# Exclude host devices from AHCI link power management.
3675# Separate multiple hosts with spaces.
3676#SATA_LINKPWR_BLACKLIST="host1"
3677
3678# Runtime Power Management for AHCI host and disks devices:
3679# on=disable, auto=enable.
3680# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
3681#AHCI_RUNTIME_PM_ON_AC=on
3682#AHCI_RUNTIME_PM_ON_BAT=on
3683
3684# Seconds of inactivity before disk is suspended.
3685AHCI_RUNTIME_PM_TIMEOUT=15
3686
3687# PCI Express Active State Power Management (PCIe ASPM):
3688# default, performance, powersave.
3689PCIE_ASPM_ON_AC=performance
3690PCIE_ASPM_ON_BAT=powersave
3691
3692# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
3693# auto = mid on BAT, high on AC; default = use hardware defaults.
3694RADEON_POWER_PROFILE_ON_AC=high
3695RADEON_POWER_PROFILE_ON_BAT=low
3696
3697# Radeon dynamic power management method (DPM): battery, performance.
3698RADEON_DPM_STATE_ON_AC=performance
3699RADEON_DPM_STATE_ON_BAT=battery
3700
3701# Radeon DPM performance level: auto, low, high; auto is recommended.
3702RADEON_DPM_PERF_LEVEL_ON_AC=auto
3703RADEON_DPM_PERF_LEVEL_ON_BAT=auto
3704
3705# WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
3706WIFI_PWR_ON_AC=off
3707WIFI_PWR_ON_BAT=on
3708
3709# Disable wake on LAN: Y/N.
3710WOL_DISABLE=Y
3711
3712# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
3713# A value of 0 disables, >=1 enables power saving (recommended: 1).
3714SOUND_POWER_SAVE_ON_AC=0
3715SOUND_POWER_SAVE_ON_BAT=0
3716
3717# Disable controller too (HDA only): Y/N.
3718SOUND_POWER_SAVE_CONTROLLER=N
3719
3720# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
3721# Drive can be powered on again by releasing (and reinserting) the eject lever
3722# or by pressing the disc eject button on newer models.
3723# Note: an UltraBay/MediaBay hard disk is never powered off.
3724BAY_POWEROFF_ON_AC=0
3725BAY_POWEROFF_ON_BAT=0
3726# Optical drive device to power off (default sr0).
3727BAY_DEVICE="sr0"
3728
3729# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
3730RUNTIME_PM_ON_AC=on
3731RUNTIME_PM_ON_BAT=auto
3732
3733# Exclude PCI(e) device adresses the following list from Runtime PM
3734# (separate with spaces). Use lspci to get the adresses (1st column).
3735#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
3736RUNTIME_PM_BLACKLIST="01:00.0"
3737
3738# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
3739# Default when unconfigured is "amdgpu nouveau nvidia radeon" which
3740# prevents accidential power-on of dGPU in hybrid graphics setups.
3741# Use "" to disable the feature completely.
3742# Separate multiple drivers with spaces.
3743#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
3744
3745# Set to 0 to disable, 1 to enable USB autosuspend feature.
3746USB_AUTOSUSPEND=1
3747
3748# Exclude listed devices from USB autosuspend (separate with spaces).
3749# Use lsusb to get the ids.
3750# Note: input devices (usbhid) are excluded automatically
3751#USB_BLACKLIST="1111:2222 3333:4444"
3752
3753# Bluetooth devices are excluded from USB autosuspend:
3754# 0=do not exclude, 1=exclude.
3755USB_BLACKLIST_BTUSB=0
3756
3757# Phone devices are excluded from USB autosuspend:
3758# 0=do not exclude, 1=exclude (enable charging).
3759USB_BLACKLIST_PHONE=0
3760
3761# Printers are excluded from USB autosuspend:
3762# 0=do not exclude, 1=exclude.
3763USB_BLACKLIST_PRINTER=1
3764
3765# WWAN devices are excluded from USB autosuspend:
3766# 0=do not exclude, 1=exclude.
3767USB_BLACKLIST_WWAN=1
3768
3769# Include listed devices into USB autosuspend even if already excluded
3770# by the blacklists above (separate with spaces).
3771# Use lsusb to get the ids.
3772#USB_WHITELIST="1111:2222 3333:4444"
3773
3774# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
3775# (workaround for USB devices that cause shutdown problems).
3776#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
3777
3778# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
3779# on system startup: 0=disable, 1=enable.
3780# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
3781# are ignored when this is enabled!
3782#RESTORE_DEVICE_STATE_ON_STARTUP=0
3783RESTORE_DEVICE_STATE_ON_STARTUP=1
3784
3785# Radio devices to disable on startup: bluetooth, wifi, wwan.
3786# Separate multiple devices with spaces.
3787#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
3788
3789# Radio devices to enable on startup: bluetooth, wifi, wwan.
3790# Separate multiple devices with spaces.
3791#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
3792
3793# Radio devices to disable on shutdown: bluetooth, wifi, wwan.
3794# (workaround for devices that are blocking shutdown).
3795#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
3796
3797# Radio devices to enable on shutdown: bluetooth, wifi, wwan.
3798# (to prevent other operating systems from missing radios).
3799#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
3800
3801# Radio devices to enable on AC: bluetooth, wifi, wwan.
3802#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
3803
3804# Radio devices to disable on battery: bluetooth, wifi, wwan.
3805#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
3806
3807# Radio devices to disable on battery when not in use (not connected):
3808# bluetooth, wifi, wwan.
3809#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
3810
3811# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
3812# required). Charging starts when the remaining capacity falls below the
3813# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
3814# Main / Internal battery (values in %)
3815#START_CHARGE_THRESH_BAT0=75
3816#STOP_CHARGE_THRESH_BAT0=80
3817# Ultrabay / Slice / Replaceable battery (values in %)
3818#START_CHARGE_THRESH_BAT1=75
3819#STOP_CHARGE_THRESH_BAT1=80
3820
3821# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
3822#RESTORE_THRESHOLDS_ON_BAT=1
3823
3824# ------------------------------------------------------------------------------
3825# tlp-rdw - Parameters for the radio device wizard
3826# Possible devices: bluetooth, wifi, wwan.
3827
3828# Hints:
3829# - Parameters are disabled by default, remove the leading # to enable them
3830# - Separate multiple radio devices with spaces
3831
3832# Radio devices to disable on connect.
3833#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
3834#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
3835#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
3836
3837# Radio devices to enable on disconnect.
3838#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
3839#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
3840#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
3841
3842# Radio devices to enable/disable when docked.
3843#DEVICES_TO_ENABLE_ON_DOCK=""
3844#DEVICES_TO_DISABLE_ON_DOCK=""
3845
3846# Radio devices to enable/disable when undocked.
3847#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
3848#DEVICES_TO_DISABLE_ON_UNDOCK=""
3849#+end_src
3850
3851** X
3852
3853*** xprofile
3854:PROPERTIES:
3855:header-args+: :tangle ~/.xprofile
3856:END:
3857
3858=~/.xprofile= is similar in style to =~/.xinitrc=, but on the
3859contrary, it's automatically sourced by LightDM, my display manager of
3860choice.
3861
3862#+begin_src sh
3863xset -b # disable bell
3864
3865# setxkbmap -option compose:ralt
3866
3867setxkbmap -option ctrl:nocaps # turn capslock into control
3868setxkbmap -option altwin:swap_alt_win # swap alt and super
3869
3870if [ $(hostname) = "plasma" ]
3871then
3872 setxkbmap -option ctrl:rctrl_ralt # turn right control into right alt
3873fi
3874
3875if [ $(hostname) = "enigma" ]
3876then
3877 xmodmap -e "keycode 135 = Alt_R" # remap menu key to alt
3878fi
3879
3880light -Scrs "intel_backlight" 2
3881
3882source $HOME/.zprofile
3883
3884export _JAVA_AWT_WM_NONREPARENTING=1
3885export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
3886
3887if [ $(hostname) = "plasma" ]
3888then
3889 unlock-def-gk.py &
3890fi
3891
3892bspwm &
3893#+end_src
3894
3895*** X resources
3896
3897**** Xresources
3898:PROPERTIES:
3899:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
3900:END:
3901
3902#+begin_src conf-xdefaults
3903#include ".Xresources.d/fonts"
3904! #include ".Xresources.d/colors"
3905#include ".Xresources.d/emacs"
3906#include ".Xresources.d/rxvt-unicode"
3907#+end_src
3908
3909**** Xresources.d
3910
3911***** fonts
3912:PROPERTIES:
3913:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
3914:END:
3915
3916#+begin_src conf-xdefaults
3917Xft.lcdfilter: lcddefault
3918Xft.antialias: true
3919Xft.autohint: 0
3920Xft.hinting: true
3921Xft.hintstyle: hintslight
3922! Xft.hintstyle: hintfull
3923Xft.rgba: rgb
3924Xft.dpi: 96
3925#+end_src
3926
3927***** colors
3928:PROPERTIES:
3929:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
3930:END:
3931
3932#+begin_src conf-xdefaults :tangle no
3933#include "gruvbox-light.xresources"
3934! #include "gruvbox-dark.xresources"
3935#include "gruvbox-urxvt256.xresources"
3936#+end_src
3937
3938#+begin_src conf-xdefaults :tangle no
3939! -----------------------------------------------------------------------------
3940! File: gruvbox-light.xresources
3941! Description: Retro groove colorscheme generalized
3942! Author: morhetz <morhetz@gmail.com>
3943! Source: https://github.com/morhetz/gruvbox-generalized
3944! Last Modified: 6 Sep 2014
3945! -----------------------------------------------------------------------------
3946
3947! hard contrast: *background: #f9f5d7
3948*background: #fbf1c7
3949! soft contrast: *background: #f2e5bc
3950*foreground: #3c3836
3951! Black + DarkGrey
3952*color0: #fdf4c1
3953*color8: #928374
3954! DarkRed + Red
3955*color1: #cc241d
3956*color9: #9d0006
3957! DarkGreen + Green
3958*color2: #98971a
3959*color10: #79740e
3960! DarkYellow + Yellow
3961*color3: #d79921
3962*color11: #b57614
3963! DarkBlue + Blue
3964*color4: #458588
3965*color12: #076678
3966! DarkMagenta + Magenta
3967*color5: #b16286
3968*color13: #8f3f71
3969! DarkCyan + Cyan
3970*color6: #689d6a
3971*color14: #427b58
3972! LightGrey + White
3973*color7: #7c6f64
3974*color15: #3c3836
3975#+end_src
3976
3977#+begin_src conf-xdefaults :tangle no
3978! -----------------------------------------------------------------------------
3979! File: gruvbox-dark.xresources
3980! Description: Retro groove colorscheme generalized
3981! Author: morhetz <morhetz@gmail.com>
3982! Source: https://github.com/morhetz/gruvbox-generalized
3983! Last Modified: 6 Sep 2014
3984! -----------------------------------------------------------------------------
3985
3986! hard contrast: *background: #1d2021
3987*background: #282828
3988! soft contrast: *background: #32302f
3989*foreground: #ebdbb2
3990! Black + DarkGrey
3991*color0: #282828
3992*color8: #928374
3993! DarkRed + Red
3994*color1: #cc241d
3995*color9: #fb4934
3996! DarkGreen + Green
3997*color2: #98971a
3998*color10: #b8bb26
3999! DarkYellow + Yellow
4000*color3: #d79921
4001*color11: #fabd2f
4002! DarkBlue + Blue
4003*color4: #458588
4004*color12: #83a598
4005! DarkMagenta + Magenta
4006*color5: #b16286
4007*color13: #d3869b
4008! DarkCyan + Cyan
4009*color6: #689d6a
4010*color14: #8ec07c
4011! LightGrey + White
4012*color7: #a89984
4013*color15: #ebdbb2
4014#+end_src
4015
4016#+begin_src conf-xdefaults :tangle no
4017! -----------------------------------------------------------------------------
4018! File: gruvbox-urxvt256.xresources
4019! Description: Retro groove colorscheme generalized
4020! Author: morhetz <morhetz@gmail.com>
4021! Source: https://github.com/morhetz/gruvbox-generalized
4022! Last Modified: 13 Dec 2013
4023! -----------------------------------------------------------------------------
4024
4025URxvt.color24: #076678
4026URxvt.color66: #427b58
4027URxvt.color88: #9d0006
4028URxvt.color96: #8f3f71
4029URxvt.color100: #79740e
4030URxvt.color108: #8ec07c
4031URxvt.color109: #83a598
4032URxvt.color130: #af3a03
4033URxvt.color136: #b57614
4034URxvt.color142: #b8bb26
4035URxvt.color167: #fb4934
4036URxvt.color175: #d3869b
4037URxvt.color208: #fe8019
4038URxvt.color214: #fabd2f
4039URxvt.color223: #ebdbb2
4040URxvt.color228: #f2e5bc
4041URxvt.color229: #fbf1c7
4042URxvt.color230: #f9f5d7
4043URxvt.color234: #1d2021
4044URxvt.color235: #282828
4045URxvt.color236: #32302f
4046URxvt.color237: #3c3836
4047URxvt.color239: #504945
4048URxvt.color241: #665c54
4049URxvt.color243: #7c6f64
4050URxvt.color244: #928374
4051URxvt.color245: #928374
4052URxvt.color246: #a89984
4053URxvt.color248: #bdae93
4054URxvt.color250: #d5c4a1
4055#+end_src
4056
4057***** emacs
4058:PROPERTIES:
4059:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
4060:END:
4061
4062#+begin_src conf-xdefaults
4063Emacs.menuBar: off
4064Emacs.toolBar: off
4065Emacs.verticalScrollBars: off
4066Emacs.cursorBlink: off
4067Emacs.FontBackend: xft,x
4068! Emacs.font: Ubuntu Mono-12
4069! Emacs.font: Triplicate T4C-11
4070! Emacs.font: Ubuntu Mono-10.5
4071! Emacs.font: Ubuntu Mono-12
4072! Emacs.font: Iosevka-11
4073
4074! Emacs.font: Fira Mono:size=15
4075! Emacs.font: DejaVu Sans Mono:size=15
4076! Emacs.font: Inconsolata:size=17
4077! Emacs.font: Inconsolata:size=16
4078! Emacs.font: Inconsolata LGC:size=14
4079! Emacs.font: Source Code Pro Medium-10.5
4080Emacs.font: Ubuntu Mono:size=16
4081! Emacs.font: Iosevka:size=16
4082#+end_src
4083
4084***** rxvt-unicode
4085:PROPERTIES:
4086:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
4087:END:
4088
4089#+begin_src conf-xdefaults
4090! Font
4091URxvt.font: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
4092URxvt.boldFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
4093URxvt.italicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
4094URxvt.bolditalicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
4095
4096URxvt.xftAntialias: true
4097URxvt.letterSpace: 0
4098
4099URxvt.depth: 0
4100URxvt.loginShell: true
4101URxvt.saveLines: 100000
4102URxvt.internalBorder: 3
4103URxvt.lineSpace: 0
4104URxvt.scrollBar: false
4105URxvt.scrollStyle: rxvt
4106URxvt*scrollTtyOutput: false
4107URxvt*scrollWithBuffer: true
4108URxvt*scrollTtyKeypress: true
4109URxvt.keysym.Shift-Up: command:\033]720;1\007
4110URxvt.keysym.Shift-Down: command:\033]721;1\007
4111
4112URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select
4113URxvt.perl-ext: bidi
4114URxvt.bidi.enabled: 1
4115URxvt.url-select.launcher: firefox
4116URxvt.url-select.underline: true
4117URxvt.keysym.M-u: perl:url-select:select_next
4118URxvt.keysym.M-Escape: perl:keyboard-select:activate
4119URxvt.keysym.M-s: perl:keyboard-select:search
4120URxvt.url-launcher: /usr/bin/firefox
4121URxvt.matcher.button: 1
4122URxvt.iso14755: false
4123URxvt.iso14755_53: false
4124URxvt.keysym.M-c: perl:clipboard:copy
4125URxvt.keysym.M-v: perl:clipboard:paste
4126URxvt.keysym.C-A-V: perl:clipboard:paste_escaped
4127URxvt.keysym.C-Up: font-size:increase
4128URxvt.keysym.C-Down: font-size:decrease
4129URxvt.keysym.C-S-Up: font-size:incglobal
4130URxvt.keysym.C-S-Down: font-size:decglobal
4131URxvt.keysym.C-equal: font-size:reset
4132!URxvt.keysym.C-question: font-size:show
4133
4134URxvt.iconFile: /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
4135
4136!urxvt*foreground: white
4137!urxvt*background: black
4138
4139!*color0: #2E3436
4140!*color1: #a40000
4141!*color2: #4E9A06
4142!*color3: #C4A000
4143!*color4: #3465A4
4144!*color5: #75507B
4145!*color6: #ce5c00
4146!*color7: #babdb9
4147!*color8: #555753
4148!*color9: #EF2929
4149!*color10: #8AE234
4150!*color11: #FCE94F
4151!*color12: #729FCF
4152!*color13: #AD7FA8
4153!*color14: #fcaf3e
4154!*color15: #EEEEEC
4155
4156!URxvt.foreground: #C8C8C8
4157!URxvt.background: #FFFFFF
4158
4159!! black
4160!*color0: #2E3436
4161!*color8: #555753
4162!! red
4163!*color1: #a40000
4164!*color9: #EF2929
4165!! green
4166!*color2: #4E9A06
4167!*color10: #8AE234
4168!! yellow
4169!*color3: #C4A000
4170!*color11: #FCE94F
4171!! blue
4172!*color4: #3465A4
4173!*color12: #729FCF
4174!! purple
4175!*color5: #75507B
4176!*color13: #AD7FA8
4177!! orange (replaces cyan)
4178!*color6: #ce5c00
4179!*color14: #fcaf3e
4180!! white
4181!*color7: #babdb9
4182!*color15: #EEEEEC
4183
4184! Tango colour theme for rxvt-unicode
4185URxvt.background: #FFFFFF
4186URxvt.foreground: #000000
4187
4188! Black
4189URxvt.color0: #2E3436
4190URxvt.color8: #757773
4191
4192! Red
4193URxvt.color1: #CC0000
4194URxvt.color9: #EF2929
4195
4196! Green
4197URxvt.color2: #4E9A06
4198URxvt.color10: #8AE234
4199
4200! Yellow
4201URxvt.color3: #C4A000
4202URxvt.color11: #FCE94F
4203
4204! Blue
4205URxvt.color4: #3465A4
4206URxvt.color12: #729FCF
4207
4208! Magenta
4209URxvt.color5: #75507B
4210URxvt.color13: #AD7FA8
4211
4212!! Cyan
4213!URxvt.color6: #06989A
4214!URxvt.color14: #34E2E2
4215! orange (replaces cyan)
4216*color6: #ce5c00
4217*color14: #fcaf3e
4218
4219! White
4220URxvt.color7: #D3D7CF
4221URxvt.color15: #EEEEEC
4222#+end_src
4223
4224** XDG
4225:PROPERTIES:
4226:header-args+: :tangle ~/.config/user-dirs.dirs
4227:END:
4228
4229#+begin_src conf
4230XDG_DESKTOP_DIR="$HOME/Desktop"
4231XDG_DOCUMENTS_DIR="$HOME/usr/docs"
4232XDG_DOWNLOAD_DIR="$HOME/usr/dls"
4233XDG_MUSIC_DIR="$HOME/usr/music"
4234XDG_PICTURES_DIR="$HOME/usr/pics"
4235XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
4236XDG_TEMPLATES_DIR="$HOME/usr/Templates"
4237XDG_VIDEOS_DIR="$HOME/usr/vids"
4238#+end_src
4239
4240** Zathura
4241:PROPERTIES:
4242:header-args+: :tangle ~/.config/zathura/zathurarc
4243:END:
4244
4245#+begin_src conf
4246set smooth-scroll true
4247set selection-clipboard clipboard
4248set zoom-step 05
4249set default-bg "#272727"
4250set statusbar-bg "#272727"
4251set inputbar-bg "#373737"
4252#+end_src
4253
4254** Zsh
4255
4256My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
4257[[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
4258installed.
4259
4260*** zimrc
4261:PROPERTIES:
4262:header-args+: :tangle ~/.zimrc
4263:END:
4264
4265#+begin_src sh
4266
4267
4268#################
4269# CORE SETTINGS #
4270#################
4271
4272#
4273# Zim settings
4274#
4275
4276# Select what modules you would like enabled.
4277# The second line of modules may depend on options set by modules in the first
4278# line. These dependencies are noted on the respective module's README.md.
4279zmodules=(directory environment git git-info history input ssh utility custom \
4280 syntax-highlighting history-substring-search prompt completion)
4281
4282
4283###################
4284# MODULE SETTINGS #
4285###################
4286
4287#
4288# Prompt
4289#
4290
4291# Set your desired prompt here
4292zprompt_theme='pure'
4293#PURE_PROMPT_SYMBOL=λ
4294#PURE_PROMPT_SYMBOL=δ
4295PURE_PROMPT_SYMBOL=➜
4296
4297#
4298# Completion
4299#
4300
4301# set an optional host-specific filename for the completion cache file
4302# if none is provided, the default '.zcompdump' is used.
4303#zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
4304
4305#
4306# Utility
4307#
4308
4309# Uncomment to enable command correction prompts
4310# See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
4311setopt CORRECT
4312
4313#
4314# Environment
4315#
4316
4317# Set the string below to the desired terminal title format string.
4318# The terminal title is redrawn upon directory change, however, variables like
4319# ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
4320# http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
4321# The example below uses the following format: 'username@host:/current/directory'
4322ztermtitle='%n@%m:%~'
4323
4324#
4325# Input
4326#
4327
4328# Uncomment to enable double-dot expansion.
4329# This appends '../' to your input for each '.' you type after an initial '..'
4330#zdouble_dot_expand='true'
4331
4332#
4333# Syntax-Highlighting
4334#
4335
4336# This determines what highlighters will be used with the syntax-highlighting module.
4337# Documentation of the highlighters can be found here:
4338# https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
4339# For (u)rxvt, termite and gnome-terminal users,
4340# removing the 'cursor' highlighter will fix the disappearing cursor problem
4341#zhighlighters=(main brackets cursor)
4342zhighlighters=(main brackets pattern)
4343
4344
4345#
4346# SSH
4347#
4348
4349# Load these ssh identities with the ssh module
4350zssh_ids=(id_rsa plasma_id_rsa id_ed25519 id_rsa_aur)
4351
4352
4353#
4354# Pacman
4355#
4356
4357# Set (optional) pacman front-end.
4358zpacman_frontend='yay'
4359
4360# Load any helper scripts as defined here
4361#zpacman_helper=(aur)
4362#+end_src
4363
4364*** zlogin
4365:PROPERTIES:
4366:header-args+: :tangle ~/.zlogin
4367:END:
4368
4369#+begin_src sh
4370
4371
4372#
4373# User configuration sourced by login shells
4374#
4375
4376# Initialize zim
4377[[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
4378#+end_src
4379
4380*** zprofile
4381:PROPERTIES:
4382:header-args+: :tangle ~/.zprofile
4383:END:
4384
4385#+begin_src sh
4386#PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
4387#PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
4388export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
4389export XDG_CONFIG_HOME=$HOME/.config
4390export XDG_DATA_HOME=$HOME/.local/share
4391export XDG_DATA_DIRS=/usr/local/share:/usr/share
4392export MAILDIR="$HOME/mail"
4393export CVS_RSH=ssh
4394#export MATHMODELS=$HOME/src/eiffel/mathmodels
4395#export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
4396#export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
4397
4398# Eiffel2Java stuff
4399#export JAVA_HOME=/usr/lib/jvm/default
4400#export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
4401#export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4402#export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4403
4404#export PATH="$HOME/usr/build/pvs:$PATH"
4405#export SBCLISP_HOME=/usr/share/sbcl-source
4406#export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
4407
4408export MOZ_USE_XINPUT2=1 # precise scrolling in firefox
4409
4410#export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
4411#export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
4412
4413if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
4414#+end_src
4415
4416*** zshenv
4417:PROPERTIES:
4418:header-args+: :tangle ~/.zshenv
4419:END:
4420
4421#+begin_src sh
4422# Ensure that a non-login, non-interactive shell has a defined environment.
4423if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
4424 source "${ZDOTDIR:-$HOME}/.zprofile"
4425fi
4426#+end_src
4427
4428*** zshrc
4429:PROPERTIES:
4430:header-args+: :tangle ~/.zshrc
4431:END:
4432
4433#+begin_src sh
4434# Bash-like navigation
4435#export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
4436#export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
4437export WORDCHARS='*?[]~=&;!#$%^(){}<>'
4438#ZLE_SPACE_SUFFIX_CHARS=$'|&'
4439
4440#disable -r time # disable shell reserved word
4441#alias time='time -p' # -p for POSIX output
4442
4443# rehash if last command was pacaur or pacman
4444# (so that zsh picks up changes in $PATH immediately)
4445TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
4446
4447#
4448# User configuration sourced by interactive shells
4449#
4450
4451# Change default zim location
4452export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
4453
4454# Start zim
4455[[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
4456
4457ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
4458#ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
4459
4460setopt globdots
4461
4462source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
4463source ~/.zsh/zsh-autopair/autopair.zsh
4464
4465
4466### fzf ###
4467
4468source /usr/share/fzf/key-bindings.zsh
4469source /usr/share/fzf/completion.zsh
4470
4471# Accept history selection instead of putting it on
4472# the command line
4473fzf-history-widget-accept() {
4474 fzf-history-widget
4475 zle accept-line
4476}
4477#zle -N fzf-history-widget-accept
4478#bindkey '^R' fzf-history-widget-accept
4479
4480# alt+c preview
4481export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
4482
4483### fzf ###
4484
4485
4486# aliases
4487alias mpv="mpv --ytdl-format mp4"
4488alias mv="mv -iv"
4489alias cp="cp -iv"
4490alias scl=systemctl
4491alias jcl=journalctl
4492alias m="mbsync -Va; getmail; notmuch new"
4493alias best="youtube-dl -f best"
4494alias ace="mosh amin@ace.aminb.org"
4495alias nixx="ssh amin@nix.aminb.org"
4496
4497aur() {
4498 cd ~/usr/build
4499 git clone https://aur.archlinux.org/${1}.git
4500 cd ${1}
4501}
4502
4503# i-beam cursor
4504echo -e "\033[5 q"
4505#echo -e "\033[6 q"
4506#+end_src
4507
4508* Scripts
4509
4510This section contains various useful scripts and the ones used by the
4511programs above. For instance, =toggle-tablet= for switching to and
4512from tablet mode on my X220T, =toggle-presentation-mode= for toggling
4513Xfce's presentation mode which keeps the screen awake, and
4514=rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
4515exact brightness value.
4516
4517** rofi-light
4518:PROPERTIES:
4519:header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
4520:END:
4521
4522#+begin_src bash
4523cur=$(light -G)
4524val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 12)
4525light -S $val
4526#+end_src
4527
4528** toggle-layout
4529:PROPERTIES:
4530:header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
4531:END:
4532
4533#+begin_src bash
4534lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
4535
4536if [ "$lang" = "us" ]; then
4537 setxkbmap ir
4538else
4539 setxkbmap us
4540 # xmodmap $HOME/.Xmodmap
4541fi
4542#+end_src
4543
4544** toggle-presentation-mode
4545:PROPERTIES:
4546:header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
4547:END:
4548
4549#+begin_src bash
4550xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
4551#+end_src
4552
4553** toggle-tablet
4554:PROPERTIES:
4555:header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
4556:END:
4557
4558This script toggles between a 'normal' mode and a 'tablet' mode, doing
4559a few things:
4560
4561- rotates the screen using =xrandr=, so that rotating the physical
4562 display of my X220t would have the laptop's battery on the right
4563 hand side,
4564- enables touch screen,
4565- properly rotates the stylus pen and touch screen pointers, and
4566- toggles between RGB and Vertical BGR sub-pixel order.
4567
4568#+begin_src bash
4569case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
4570 0) # Screen is not rotated, we should rotate it right (90°)
4571 xrandr -o 3
4572 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
4573 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
4574 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
4575 xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
4576 ;;
4577 1) # Currently top is rotated right, we should set it normal (0°)
4578 xrandr -o 0
4579 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
4580 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
4581 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
4582 xfconf-query -c xsettings -p /Xft/RGBA -s rgb
4583 ;;
4584 *)
4585 echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
4586 exit 1
4587 ;;
4588esac
4589#+end_src
4590
4591** unlock-def-gk.py
4592:PROPERTIES:
4593:header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
4594:END:
4595
4596#+begin_src python
4597import gnomekeyring as gk
4598# list_item_ids_sync('login')[0] == 1L
4599gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
4600#+end_src
4601
4602** wp
4603
4604My little wallpaper changer script.
4605
4606*** wp
4607:PROPERTIES:
4608:header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
4609:END:
4610
4611#+begin_src bash :tangle no
4612export DISPLAY=:0
4613
4614case "$1" in
4615 "day")
4616 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
4617 ;;
4618 "night")
4619 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
4620 ;;
4621 *)
4622 echo $"Usage: $0 {day|night}"
4623 exit 1
4624esac
4625#+end_src
4626
4627*** wp-auto
4628:PROPERTIES:
4629:header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
4630:END:
4631
4632#+begin_src bash :tangle no
4633SED=$(which sed)
4634ROFI=$(which rofi)
4635
4636export DISPLAY=:0
4637HOUR=$(date +%H)
4638
4639if [ -z "${SED}" ]
4640then
4641 echo "Did not find 'sed', script cannot continue."
4642 exit 1
4643fi
4644if [ -z "${ROFI}" ]
4645then
4646 echo "Did not find rofi, there is no point to continue."
4647 exit 1
4648fi
4649
4650###
4651# Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
4652# Repeated calls should leave the config clean-ish
4653###
4654function set_theme()
4655{
4656 CDIR="${HOME}/.config/rofi/"
4657 if [ ! -d "${CDIR}" ]
4658 then
4659 mkdir -p ${CDIR}
4660 fi
4661 if [ -f "${CDIR}/config" ]
4662 then
4663 ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
4664 fi
4665 echo "rofi.theme: ${1}" >> "${CDIR}/config"
4666
4667}
4668
4669if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
4670 then
4671 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
4672 xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
4673 set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
4674 else
4675 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
4676 xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
4677 set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
4678fi
4679#+end_src
4680
4681*** wp.service
4682:PROPERTIES:
4683:header-args+: :tangle ~/.config/systemd/user/wp.service
4684:END:
4685
4686#+begin_src conf :tangle no
4687[Unit]
4688Description=wallpaper service
4689
4690[Service]
4691Type=oneshot
4692ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
4693#+end_src
4694
4695*** wp.timer
4696:PROPERTIES:
4697:header-args+: :tangle ~/.config/systemd/user/wp.timer
4698:END:
4699
4700#+begin_src conf :tangle no
4701[Unit]
4702[Unit]
4703Description=wallpaper timer
4704
4705[Timer]
4706OnCalendar=07,21:00
4707Unit=wp.service
4708Persistent=true
4709
4710[Install]
4711WantedBy=timers.target
4712#+end_src
4713
4714** zathura-sync.sh
4715:PROPERTIES:
4716:header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
4717:END:
4718
4719#+begin_src sh
4720pos="$1"
4721pdffile="$2"
4722zathura --synctex-forward "$pos" "$pdffile" || \
4723 (
4724 zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
4725 sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
4726#+end_src
4727** Fun :)
4728
4729*** eat-em
4730:PROPERTIES:
4731:header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
4732:END:
4733
4734#+begin_src sh
4735# Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
4736# [ESC] character in original post removed here.
4737
4738# ANSI Color -- use these variables to easily have different color
4739# and format output. Make sure to output the reset sequence after
4740# colors (f = foreground, b = background), and use the 'off'
4741# feature for anything you turn on.
4742
4743initializeANSI()
4744{
4745 esc="$(echo -en '\e')"
4746
4747 blackf="${esc}[30m"; redf="${esc}[31m"; greenf="${esc}[32m"
4748 yellowf="${esc}[33m" bluef="${esc}[34m"; purplef="${esc}[35m"
4749 cyanf="${esc}[36m"; whitef="${esc}[37m"
4750
4751 blackb="${esc}[40m"; redb="${esc}[41m"; greenb="${esc}[42m"
4752 yellowb="${esc}[43m" blueb="${esc}[44m"; purpleb="${esc}[45m"
4753 cyanb="${esc}[46m"; whiteb="${esc}[47m"
4754
4755 boldon="${esc}[1m"; boldoff="${esc}[22m"
4756 italicson="${esc}[3m"; italicsoff="${esc}[23m"
4757 ulon="${esc}[4m"; uloff="${esc}[24m"
4758 invon="${esc}[7m"; invoff="${esc}[27m"
4759
4760 reset="${esc}[0m"
4761}
4762
4763# note in this first use that switching colors doesn't require a reset
4764# first - the new color overrides the old one.
4765
4766#clear
4767
4768initializeANSI
4769
4770cat << EOF
4771
4772 ${yellowf} ▄███████▄${reset} ${redf} ▄██████▄${reset} ${greenf} ▄██████▄${reset} ${bluef} ▄██████▄${reset} ${purplef} ▄██████▄${reset} ${cyanf} ▄██████▄${reset}
4773 ${yellowf}▄█████████▀▀${reset} ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset} ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset} ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset} ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset} ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
4774 ${yellowf}███████▀${reset} ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset} ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset} ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset} ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset} ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
4775 ${yellowf}███████▄${reset} ${redf}████████████${reset} ${greenf}████████████${reset} ${bluef}████████████${reset} ${purplef}████████████${reset} ${cyanf}████████████${reset}
4776 ${yellowf}▀█████████▄▄${reset} ${redf}██▀██▀▀██▀██${reset} ${greenf}██▀██▀▀██▀██${reset} ${bluef}██▀██▀▀██▀██${reset} ${purplef}██▀██▀▀██▀██${reset} ${cyanf}██▀██▀▀██▀██${reset}
4777 ${yellowf} ▀███████▀${reset} ${redf}▀ ▀ ▀ ▀${reset} ${greenf}▀ ▀ ▀ ▀${reset} ${bluef}▀ ▀ ▀ ▀${reset} ${purplef}▀ ▀ ▀ ▀${reset} ${cyanf}▀ ▀ ▀ ▀${reset}
4778
4779 ${boldon}${yellowf} ▄███████▄ ${redf} ▄██████▄ ${greenf} ▄██████▄ ${bluef} ▄██████▄ ${purplef} ▄██████▄ ${cyanf} ▄██████▄${reset}
4780 ${boldon}${yellowf}▄█████████▀▀ ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄ ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄ ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄ ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄ ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
4781 ${boldon}${yellowf}███████▀ ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███ ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███ ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███ ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███ ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
4782 ${boldon}${yellowf}███████▄ ${redf}████████████ ${greenf}████████████ ${bluef}████████████ ${purplef}████████████ ${cyanf}████████████${reset}
4783 ${boldon}${yellowf}▀█████████▄▄ ${redf}██▀██▀▀██▀██ ${greenf}██▀██▀▀██▀██ ${bluef}██▀██▀▀██▀██ ${purplef}██▀██▀▀██▀██ ${cyanf}██▀██▀▀██▀██${reset}
4784 ${boldon}${yellowf} ▀███████▀ ${redf}▀ ▀ ▀ ▀ ${greenf}▀ ▀ ▀ ▀ ${bluef}▀ ▀ ▀ ▀ ${purplef}▀ ▀ ▀ ▀ ${cyanf}▀ ▀ ▀ ▀${reset}
4785
4786EOF
4787#+end_src
4788
4789*** invade-em
4790:PROPERTIES:
4791:header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
4792:END:
4793
4794#+begin_src bash
4795#
4796# ANSI color scheme script featuring Space Invaders
4797#
4798# Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
4799# Modified by lolilolicon
4800#
4801
4802f=3 b=4
4803for j in f b; do
4804 for i in {0..7}; do
4805 printf -v $j$i %b "\e[${!j}${i}m"
4806 done
4807done
4808bld=$'\e[1m'
4809rst=$'\e[0m'
4810
4811cat << EOF
4812
4813 $f1 ▀▄ ▄▀ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4 ▀▄ ▄▀ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
4814 $f1 ▄█▀███▀█▄ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4 ▄█▀███▀█▄ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
4815 $f1█▀███████▀█ $f2▀▀███▀▀███▀▀ $f3▀█▀██▀█▀ $f4█▀███████▀█ $f5▀▀███▀▀███▀▀ $f6▀█▀██▀█▀$rst
4816 $f1▀ ▀▄▄ ▄▄▀ ▀ $f2 ▀█▄ ▀▀ ▄█▀ $f3▀▄ ▄▀ $f4▀ ▀▄▄ ▄▄▀ ▀ $f5 ▀█▄ ▀▀ ▄█▀ $f6▀▄ ▄▀$rst
4817
4818 $bld$f1▄ ▀▄ ▄▀ ▄ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4▄ ▀▄ ▄▀ ▄ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
4819 $bld$f1█▄█▀███▀█▄█ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4█▄█▀███▀█▄█ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
4820 $bld$f1▀█████████▀ $f2▀▀▀██▀▀██▀▀▀ $f3▀▀█▀▀█▀▀ $f4▀█████████▀ $f5▀▀▀██▀▀██▀▀▀ $f6▀▀█▀▀█▀▀$rst
4821 $bld$f1 ▄▀ ▀▄ $f2▄▄▀▀ ▀▀ ▀▀▄▄ $f3▄▀▄▀▀▄▀▄ $f4 ▄▀ ▀▄ $f5▄▄▀▀ ▀▀ ▀▀▄▄ $f6▄▀▄▀▀▄▀▄$rst
4822
4823
4824 $f7▌$rst
4825
4826 $f7▌$rst
4827
4828 $f7 ▄█▄ $rst
4829 $f7▄█████████▄$rst
4830 $f7▀▀▀▀▀▀▀▀▀▀▀$rst
4831
4832EOF
4833#+end_src