* .config/jami.net/Jami.conf: Update.
[~bandali/configs] / .config / redshift.conf
... / ...
CommitLineData
1; Global settings for redshift
2[redshift]
3; Set the day and night screen temperatures (Neutral is 6500K)
4;temp-day=5700
5;temp-night=3500
6
7;temp-day=6500
8temp-day=6200
9;temp-night=4800
10;temp-night=5000
11;temp-night=4500
12temp-night=4000
13
14; Enable/Disable a smooth transition between day and night
15; 0 will cause a direct change from day to night screen temperature.
16; 1 will gradually increase or decrease the screen temperature.
17transition=1
18
19; Set the screen brightness. Default is 1.0.
20;brightness=0.9
21; It is also possible to use different settings for day and night
22; since version 1.8.
23;brightness-day=0.7
24;brightness-night=0.4
25; Set the screen gamma (for all colors, or each color channel
26; individually)
27;gamma=0.8
28;gamma=1.0
29;gamma=0.8:0.7:0.8
30; This can also be set individually for day and night since
31; version 1.10.
32;gamma-day=0.8:0.7:0.8
33;gamma-night=0.6
34
35; Set the location-provider: 'geoclue2' or 'manual'
36; type 'redshift -l list' to see possible values.
37; The location provider settings are in a different section.
38;location-provider=manual
39location-provider=geoclue2
40
41; Set the adjustment-method: 'randr', 'vidmode'
42; type 'redshift -m list' to see all possible values.
43; 'randr' is the preferred method, 'vidmode' is an older API.
44; but works in some cases when 'randr' does not.
45; The adjustment method settings are in a different section.
46adjustment-method=randr
47
48; Configuration of the location-provider:
49; type 'redshift -l PROVIDER:help' to see the settings.
50; ex: 'redshift -l manual:help'
51; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
52; are negative numbers.
53;[manual]
54;lat=48.1
55;lon=11.6
56
57; Configuration of the adjustment-method
58; type 'redshift -m METHOD:help' to see the settings.
59; ex: 'redshift -m randr:help'
60; In this example, randr is configured to adjust screen 1.
61; Note that the numbering starts from 0, so this is actually the
62; second screen. If this option is not specified, Redshift will try
63; to adjust _all_ screens.
64;[randr]
65;screen=1