[rc/msmtp] add alias account for new address
[~bandali/configs] / rc.org
... / ...
CommitLineData
1#+title: rc.org
2#+property: header-args :comments link :mkdirp yes :results silent
3
4* About
5
6This org file contains the configuration files of pretty much every
7program I use. The files are tangled (i.e. exported, or derived) from
8this file using =org-babel=.
9
10Note: This file is best viewed inside Emacs with org mode.
11
12* Configs
13
14This section contains the configuration files (dotfiles) of various
15programs I use.
16
17** bspwm
18
19*** bspwmrc
20:PROPERTIES:
21:header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
22:END:
23
24#+begin_src sh :tangle no
25sxhkd &
26sh ~/.fehbg &
27xfce4-panel -d &
28compton &
29sleep 0.5 && pasystray --notify=all &
30
31bspc monitor -d I II III IV V VI VII VIII IX X
32#bspc monitor eDP-1 -d I II III IV V
33#bspc monitor HDMI-1 -d VI VII VIII IX X
34
35#bspc config border_width 2
36#bspc config window_gap 8
37bspc config window_gap 0
38
39bspc config bottom_padding 26
40
41bspc config split_ratio 0.52
42bspc config borderless_monocle true
43bspc config gapless_monocle true
44bspc config click_to_focus button1
45bspc config directional_focus_tightness low
46
47#bspc rule -a Firefox desktop='^1' follow=on
48bspc rule -a Nightly desktop='^1' follow=on
49bspc rule -a Emacs desktop='^2' state=tiled follow=on
50#bspc rule -a Chromium desktop='^4' follow=on
51bspc rule -a URxvt state=floating
52bspc rule -a URxvt:tiled state=tiled
53bspc rule -a Connman-gtk state=floating
54bspc rule -a Xfce4-panel state=floating
55bspc rule -a TelegramDesktop state=floating
56bspc rule -a Ec state=floating
57bspc rule -a Pavucontrol state=floating
58bspc rule -a Eog state=floating
59bspc rule -a Seahorse state=floating
60bspc rule -a mpv state=floating
61bspc rule -a Evince state=floating
62bspc rule -a Meld state=floating
63bspc rule -a Autokey-gtk state=floating
64bspc rule -a Mousepad state=floating
65bspc rule -a Wrapper-1.0 state=floating
66bspc rule -a File-roller state=floating
67bspc rule -a Gnome-disks state=floating
68bspc rule -a Termite state=floating
69bspc rule -a Termite:tiled state=tiled
70bspc rule -a Thunderbird:Calendar state=floating
71bspc rule -a Audacity state=floating
72bspc rule -a Proof state=floating # pvs x-show-proof
73bspc rule -a Nm-connection-editor state=floating
74bspc rule -a Wire state=floating
75bspc rule -a discord state=floating
76bspc rule -a X2goclient state=floating
77bspc rule -a SimpleScreenRecorder state=floating
78bspc rule -a Gimp state=floating
79bspc rule -a Wrapper-2.0 state=floating
80bspc rule -a Zathura state=tiled
81#+end_src
82
83*** sxhkdrc
84:PROPERTIES:
85:header-args+: :tangle ~/.config/sxhkd/sxhkdrc
86:END:
87
88#+begin_src conf :tangle no
89#
90# wm independent hotkeys
91#
92
93# terminal emulator
94super + {_,shift} + Return
95 urxvt{_, -name tiled}
96
97#super + {_,shift} + Return
98# termite{_, --name=tiled}
99
100# program launcher
101super + space
102 rofi -show run -display-run '> ' -display-window ' 🗔 '
103
104super + alt + space
105 xfce4-popup-whiskermenu
106
107# window finder
108super + backslash
109 rofi -show window -display-run '> ' -display-window ' 🗔 '
110
111# password manager
112alt + space
113 rofi-pass
114
115# firefox
116#super + r
117# firefox
118
119# chromium
120#super + c
121# chromium -incognito
122
123# emacs
124super + e
125 emacs
126
127# make sxhkd reload its configuration files:
128super + Escape
129 pkill -USR1 -x sxhkd
130
131# volume {up,down}
132XF86Audio{Raise,Lower}Volume
133 pamixer --allow-boost --{in,de}crease 5
134
135# mute
136XF86AudioMute
137 pamixer --toggle-mute
138
139XF86AudioMicMute
140 pactl set-source-mute 1 toggle
141
142# playback control
143XF86Audio{Play,Prev,Next}
144 mpc {toggle,prev,next}
145
146# lock the screen
147super + shift + q
148 light-locker-command -l
149
150# Toggle keyboard layout
151super + F7
152 toggle-layout
153
154# Toggle Xfce presentation mode
155XF86LaunchB
156 toggle-presentation-mode
157
158# monitor brightness
159XF86MonBrightness{Up,Down}
160 light -{A,U} 5
161
162super + apostrophe
163 rofi-light
164
165# keyboard brightness
166#XF86KbdBrightness{Up,Down}
167# kbdlight {up,down}
168
169XF86RotateWindows
170 toggle-tablet
171
172#
173# bspwm hotkeys
174#
175
176# quit bspwm normally
177super + alt + Escape
178 bspc quit
179
180# close and kill
181super + {w,q}
182 bspc node -{c,k}
183
184# alternate between the tiled and monocle layout
185super + m
186 bspc desktop -l next
187
188# send the newest marked node to the newest preselected node
189super + y
190 bspc node newest.marked.local -n newest.!automatic.local
191
192# swap the current node and the biggest node
193super + g
194 bspc node -s biggest
195
196#
197# state/flags
198#
199
200# set the window state
201super + {t,shift + t,s,f}
202 bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
203
204# set the node flags
205super + ctrl + {m,x,y,z}
206 bspc node -g {marked,locked,sticky,private}
207
208#
209# focus/swap
210#
211
212# focus the node in the given direction
213super + {_,shift + }{h,j,k,l}
214 bspc node -{f,s} {west,south,north,east}
215
216# focus the node for the given path jump
217super + {p,b,comma,period}
218 bspc node -f @{parent,brother,first,second}
219
220# focus the next/previous node in the current desktop
221super + {_,shift + }c
222 bspc node -f {next,prev}.local
223
224# focus the next/previous desktop in the current monitor
225super + bracket{left,right}
226 bspc desktop -f {prev,next}.local
227
228# send to next/prev desktop
229super + shift + bracket{left,right}
230 bspc node -d {prev,next} --follow
231
232# focus the last node/desktop
233super + {grave,Tab}
234 bspc {node,desktop} -f last
235
236# focus the older or newer node in the focus history
237super + {o,i}
238 bspc wm -h off; \
239 bspc node {older,newer} -f; \
240 bspc wm -h on
241
242# focus or send to the given desktop
243super + {_,shift + }{1-9,0}
244 bspc {desktop -f,node -d} '^{1-9,10}'
245
246#
247# preselect
248#
249
250# preselect the direction
251super + ctrl + {h,j,k,l}
252 bspc node -p {west,south,north,east}
253
254# preselect the ratio
255super + ctrl + {1-9}
256 bspc node -o 0.{1-9}
257
258# cancel the preselection for the focused node
259super + ctrl + space
260 bspc node -p cancel
261
262# cancel the preselection for the focused desktop
263super + ctrl + shift + space
264 bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
265
266#
267# move/resize
268#
269
270# expand a window by moving one of its side outward
271super + alt + {h,j,k,l}
272 bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
273
274# contract a window by moving one of its side inward
275super + alt + shift + {h,j,k,l}
276 bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
277
278# move a floating window
279super + {Left,Down,Up,Right}
280 bspc node -v {-20 0,0 20,0 -20,20 0}
281
282#alt + bracket{left,right}
283# xdotool key --clearmodifiers ctrl+Page_{Up,Down}
284#+end_src
285
286** compton
287:PROPERTIES:
288:header-args+: :tangle ~/.config/compton.conf
289:END:
290
291#+begin_src conf :tangle no
292# Shadow
293shadow = false; # Enabled client-side shadows on windows.
294no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows.
295no-dnd-shadow = true; # Don't draw shadows on DND windows.
296clear-shadow = true; # Zero the part of the shadow's mask behind the
297 # window. Fix some weirdness with ARGB windows.
298shadow-radius = 5; # The blur radius for shadows. (default 12)
299shadow-offset-x = -5; # The left offset for shadows. (default -15)
300shadow-offset-y = -5; # The top offset for shadows. (default -15)
301# shadow-opacity = 0.7; # The translucency for shadows. (default .75)
302# shadow-red = 0.0; # Red color value of shadow. (0.0 - 1.0, defaults to 0)
303# shadow-green = 0.0; # Green color value of shadow. (0.0 - 1.0, defaults to 0)
304# shadow-blue = 0.0; # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
305shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ]; # Exclude conditions for shadows.
306# shadow-exclude = "n:e:Notification";
307#shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
308shadow-ignore-shaped = true; # Avoid drawing shadow on all shaped windows
309 # (see also: --detect-rounded-corners)
310
311# Opacity
312menu-opacity = 1.0; # The opacity for menus. (default 1.0)
313#inactive-opacity = 0.9; # Default opacity of inactive windows. (0.0 - 1.0)
314# active-opacity = 0.8; # Default opacity for active windows. (0.0 - 1.0)
315frame-opacity = 1.0; # Opacity of window titlebars and borders. (0.1 - 1.0)
316# inactive-opacity-override = true; # Let inactive opacity set by 'inactive-opacity' overrides
317 # value of _NET_WM_OPACITY. Bad choice.
318alpha-step = 0.06; # XRender backend: Step size for alpha pictures. Increasing
319 # it may result in less X resource usage,
320 # Yet fading may look bad.
321#inactive-dim = 0.5; # Dim inactive windows. (0.0 - 1.0)
322#inactive-dim-fixed = true; # Do not let dimness adjust based on window opacity.
323# blur-background = true; # Blur background of transparent windows.
324 # Bad performance with X Render backend.
325 # GLX backend is preferred.
326# blur-background-frame = true; # Blur background of opaque windows with transparent
327 # frames as well.
328blur-background-fixed = true; # Do not let blur radius adjust based on window opacity.
329blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
330 # Exclude conditions for background blur.
331
332# Fading
333fading = false; # Fade windows during opacity changes.
334fade-delta = 3; # The time between steps in a fade in milliseconds. (default 10).
335fade-in-step = 0.03; # Opacity change between steps while fading in. (default 0.028).
336fade-out-step = 0.03; # Opacity change between steps while fading out. (default 0.03).
337# no-fading-openclose = true; # Avoid fade windows in/out when opening/closing.
338fade-exclude = [ ]; # Exclude conditions for fading.
339
340# Other
341backend = "glx" # Backend to use: "xrender" or "glx". GLX backend is typically
342 # much faster but depends on a sane driver.
343mark-wmwin-focused = true; # Try to detect WM windows and mark them as active.
344mark-ovredir-focused = true; # Mark all non-WM but override-redirect windows active (e.g. menus).
345use-ewmh-active-win = true; # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
346 # instead of using FocusIn/Out events. Usually more reliable but
347 # depends on a EWMH-compliant WM.
348detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
349detect-client-opacity = true; # Detect _NET_WM_OPACITY on client windows, useful for window
350 # managers not passing _NET_WM_OPACITY of client windows to frame
351 # windows.
352refresh-rate = 0; # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
353vsync = "drm"; # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
354 # See man page for more details.
355dbe = false; # Enable DBE painting mode. Rarely needed.
356paint-on-overlay = true; # Painting on X Composite overlay window. Recommended.
357sw-opti = false; # Limit compton to repaint at most once every 1 / refresh_rate.
358 # Incompatible with certain VSync methods.
359unredir-if-possible = false; # Unredirect all windows if a full-screen opaque window is
360 # detected, to maximize performance for full-screen windows.
361focus-exclude = [ ]; # A list of conditions of windows that should always be considered
362 # focused.
363detect-transient = true; # Use WM_TRANSIENT_FOR to group windows, and consider windows in
364 # the same group focused at the same time.
365detect-client-leader = true; # Use WM_CLIENT_LEADER to group windows.
366invert-color-include = [ ]; # Conditions for windows to be painted with inverted color.
367
368# GLX backend # GLX backend fine-tune options. See man page for more info.
369glx-no-stencil = true; # Recommended.
370glx-copy-from-front = false; # Useful with --glx-swap-method,
371# glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
372# glx-no-rebind-pixmap = true; # Recommended if it works.
373glx-no-rebind-pixmap = true; # Recommended if it works.
374#glx-swap-method = "4"; # See man page.
375glx-swap-method = "4"; # See man page.
376
377# Window type settings
378wintypes:
379{
380 tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
381 menu = { shadow = false; };
382 dropdown_menu = { shadow = false; };
383 popup_menu = { shadow = false; };
384 utility = { shadow = false; };
385 # fade: Fade the particular type of windows.
386 # shadow: Give those windows shadow
387 # opacity: Default opacity for the type of windows.
388 # focus: Whether to always consider windows of this type focused.
389};
390#+end_src
391
392** dovecot
393:PROPERTIES:
394:header-args+: :tangle "/sudo::/etc/dovecot/dovecot.conf"
395:END:
396
397#+begin_src conf
398protocols = imap
399
400listen = 127.0.0.1
401log_path = /var/log/dovecot.log
402info_log_path = /var/log/dovecot-info.log
403
404ssl = no
405disable_plaintext_auth = no
406
407auth_verbose = yes
408auth_mechanisms = plain
409
410passdb {
411 driver = passwd-file
412 args = /etc/dovecot/passwd
413}
414
415userdb {
416 driver = static
417 args = uid=amin gid=amin home=/home/amin/mail/%d/%n
418 default_fields = mail=maildir:/home/amin/mail/%d/%n/mail
419}
420
421# mail_home = /home/amin/mail/%d/%n
422# mail_location = maildir:/home/amin/mail/%d/%n/mail:LAYOUT=fs:INBOX=/home/amin/mail/%d/%n/mail/Inbox
423
424# namespace {
425# inbox = yes
426# separator = /
427# }
428
429mail_plugins = $mail_plugins fts fts_lucene
430
431plugin {
432 fts = lucene
433 fts_lucene = whitespace_chars=@.
434 fts_autoindex = yes
435}
436#+end_src
437
438** Dunst
439:PROPERTIES:
440:header-args+: :tangle ~/.config/dunst/dunstrc
441:END:
442
443#+begin_src conf
444[global]
445#font = Ubuntu Mono 10.5
446font = Inconsolata 11
447
448# Path to default icons.
449icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
450
451icon_position = left
452# <b>bold</b>
453# <i>italic</i>
454# <s>strikethrough<s/>
455# <u>underline</u>
456markup = full
457# The format of the message. Possible variables are:
458# %a appname
459# %s summary
460# %b body
461# %i iconname (including its path)
462# %I iconname (without its path)
463# %p progress value if set ([ 0%] to [100%]) or nothing
464# Markup is allowed
465format = "<b>%s</b>\n%b"
466# Sort messages by urgency
467sort = yes
468# Show how many messages are currently hidden (because of geometry)
469indicate_hiddenl= no
470# Alignment of message text.
471# Possible values are "left", "center" and "right"
472alignment = center
473# The frequency with wich text that is longer than the notification
474# window allows bounces back and forth.
475# This option conflicts with 'word_wrap'.
476# Set to 0 to disable
477bounce_freq = 3
478# show age of message if message is older than show_age_threshold seconds.
479# set to -1 to disable
480show_age_threshold = -1
481# split notifications into multiple lines if they don't fit into geometry
482word_wrap = yes
483# ignore newlines '\n' in notifications
484ignore_newline = no
485# The geometry of the message window.
486# geometry [{width}]x{height}][+/-{x}+/-{y}]
487# The height is measured in number of notifications everything else in pixels. If the width
488# is omitted but the height is given ("-geometry x2"), the message window
489# expands over the whole screen (dmenu-like). If width is 0,
490# the window expands to the longest message displayed.
491# A positive x is measured from the left, a negative from the
492# right side of the screen. Y is measured from the top and down respectevly.
493# The width can be negative. In this case the actual width is the
494# screen width minus the width defined in within the geometry option.
495#geometry = "410x12-12+12"
496#geometry = "0x0-30-30"
497geometry = "260x12-30-30"
498# The transparency of the window. range: [0; 100]
499# This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
500transparency = 0
501# Don't remove messages, if the user is idle (no mouse or keyboard input)
502# for longer than idle_threshold seconds.
503# Set to 0 to disable.
504idle_threshold = 120
505# Which monitor should the notifications be displayed on.
506monitor = 0
507# Display notification on focused monitor. Possible modes are:
508# mouse: follow mouse pointer
509# keyboard: follow window with keyboard focus
510# none: don't follow anything
511#
512# "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
513# This should be the case for almost all modern windowmanagers.
514#
515# If this option is set to mouse or keyboard, the monitor option will be
516# ignored.
517follow = keyboard
518# should a notification popped up from history be sticky or
519# timeout as if it would normally do.
520sticky_history = yes
521# The height of a single line. If the height is smaller than the font height,
522# it will get raised to the font height.
523# This adds empty space above and under the text.
524line_height = 0
525
526show_indicators = yes
527
528# Draw a line of 'separatpr_height' pixel height between two notifications.
529# Set to 0 to disable
530separator_height = 3
531# padding between text and separator
532padding = 8
533# horizontal padding
534horizontal_padding = 8
535# Define a color for the separator.
536# possible values are:
537# * auto: dunst tries to find a color fitting to the background
538# * foreground: use the same color as the foreground
539# * frame: use the same color as the frame.
540# * anything else will be interpreted as a X color
541separator_color = foreground
542# print a notification on startup
543# This is mainly for error detection, since dbus (re-)starts dunst
544# automatically after a crash.
545startup_notification = false
546# dmenu path
547#dmenu = /usr/bin/dmenu -p dunst:
548dmenu = /usr/bin/rofi -dmenu -p dunst:
549# browser for opening urls in context menu
550browser = /usr/bin/firefox -new-tab
551[frame]
552width = 0
553color = "#377222"
554[shortcuts]
555# shortcuts are specified as [modifier+][modifier+]...key
556# available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
557# and 'mod4' (windows-key)
558# xev might be helpful to find names for keys
559# close notification
560close = ctrl+space
561# close all notifications
562close_all = ctrl+shift+space
563# redisplay last message(s)
564# On the US keyboard layout 'grave' is normally above TAB and left of '1'.
565history = ctrl+shift+h
566# context menu
567context = ctrl+shift+period
568[urgency_low]
569# IMPORTANT: colors have to be defined in quotation marks.
570# Otherwise the '#' and following would be interpreted as a comment.
571background = "#1d2a30"
572foreground = "#71c2af"
573timeout = 3
574[urgency_normal]
575background = "#1d2a30"
576foreground = "#71c2af"
577timeout = 0
578[urgency_critical]
579background = "#1d2a30"
580foreground = "#ff9982"
581timeout = 0
582
583# Every section that isn't one of the above is interpreted as a rules
584# to override settings for certain messages.
585# Messages can be matched by 'appname', 'summary', 'body' or 'icon'
586# and you can override the 'timeout', 'urgency', 'foreground', 'background'
587# and 'format'.
588# Shell-like globbing will get expanded.
589#
590# SCRIPTING
591# you can specify a script that gets run when the rule matches by setting
592# the 'script' option.
593# The script will be called as follows:
594# script appname summary body icon urgency
595# where urgency can be "LOW", "NORMAL" or "CRITICAL".
596#
597# NOTE: if you don't want a notification to be displayed, set the format to ""
598# NOTE: It might be helpful to run dunst -print in a terminal in order to find
599# fitting options for rules.
600#[espeak]
601# summary = "*"
602# script = dunst_espeak.sh
603#[script-test]
604# summary = "*script*"
605# script = dunst_test.sh
606#[ignore]
607## This notification will not be displayed
608# summary = "foobar"
609# format = ""
610#[signed_on]
611# appname = Pidgin
612# summary = "*signed on*"
613# urgency = low
614#
615#[signed_off]
616# appname = Pidgin
617# summary = *signed off*
618# urgency = low
619#
620#[says]
621# appname = Pidgin
622# summary = *says*
623# urgency = critical
624#
625#[twitter]
626# appname = Pidgin
627# summary = *twitter.com*
628# urgency = normal
629#
630[xfpm-backlight]
631 summary = *Brightness*
632 urgency = low
633#+end_src
634
635** Fontconfig
636:PROPERTIES:
637:header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
638:END:
639
640#+begin_src xml
641<?xml version="1.0"?>
642<!DOCTYPE fontconfig SYSTEM "fonts.dtd">
643<fontconfig>
644 <match target="font">
645 <edit mode="assign" name="rgba">
646 <const>rgb</const>
647 </edit>
648 </match>
649 <match target="font">
650 <edit mode="assign" name="hinting">
651 <bool>true</bool>
652 </edit>
653 </match>
654 <match target="font">
655 <edit mode="assign" name="hintstyle">
656 <const>hintslight</const>
657 </edit>
658 </match>
659 <match target="font">
660 <edit mode="assign" name="antialias">
661 <bool>true</bool>
662 </edit>
663 </match>
664 <match target="font">
665 <edit mode="assign" name="lcdfilter">
666 <const>lcddefault</const>
667 </edit>
668 </match>
669 <dir>~/.fonts</dir>
670
671 <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
672 <alias binding="same">
673 <family>Helvetica</family>
674 <prefer>
675 <family>Liberation Sans</family>
676 </prefer>
677</alias>
678</fontconfig>
679#+end_src
680
681** getmail
682
683*** getmailrc
684:PROPERTIES:
685:header-args+: :tangle ~/.getmail/getmailrc
686:END:
687
688#+begin_src conf
689[retriever]
690type = SimplePOP3SSLRetriever
691server = fencepost.gnu.org
692username = bandali
693password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
694port = 995
695use_apop = True
696
697[destination]
698type = Maildir
699path = ~/mail/gnu/Inbox/
700
701[options]
702delete = True
703#+end_src
704
705*** getmail.service
706:PROPERTIES:
707:header-args+: :tangle ~/.config/systemd/user/getmail.service
708:END:
709
710#+begin_src conf :tangle no
711[Unit]
712Description=getmail service
713
714[Service]
715Type=oneshot
716ExecStart=/usr/bin/getmail
717StandardOutput=syslog
718StandardError=syslog
719#+end_src
720
721*** getmail.timer
722:PROPERTIES:
723:header-args+: :tangle ~/.config/systemd/user/getmail.timer
724:END:
725
726#+begin_src conf :tangle no
727[Unit]
728Description=getmail timer
729
730[Timer]
731OnCalendar=*:0/30
732Persistent=true
733Unit=getmail.service
734
735[Install]
736WantedBy=timers.target
737#+end_src
738
739** Git
740
741*** gitconfig
742:PROPERTIES:
743:header-args+: :tangle ~/.gitconfig
744:END:
745
746**** user
747#+begin_src conf
748[user]
749 name = Amin Bandali
750 email = bandali@gnu.org
751 signingkey = BE6273738E616D6D1B3A08E8A21A020248816103
752#+end_src
753
754**** signing
755#+begin_src conf
756[commit]
757 gpgsign = true
758# [format]
759# signoff = true
760#+end_src
761
762**** core
763#+begin_src conf
764[core]
765 autocrlf = input # CRLF -> LF on commit
766 editor = emacsclient -t
767 excludesfile = ~/.gitignore_global
768 pager = "less"
769#+end_src
770
771**** gpg
772#+begin_src conf
773[gpg]
774 program = gpg2
775#+end_src
776
777**** alias
778#+begin_src conf
779[alias]
780 git = !exec git # handle nested git calls, e.g. git git status
781 aliases = config --get-regexp '^alias\\.'
782 a = add
783 s = status
784 sl = status --long
785 c = checkout
786 cb = checkout -b
787 b = branch
788 r = rebase
789 p = pull
790 pr = pull --rebase
791 ps = push
792 psf = push --force
793 nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f"
794 nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f"
795#+end_src
796
797**** color
798#+begin_src conf
799[color]
800 ui = auto
801[color "status"]
802 added = green bold
803 changed = red bold
804 untracked = red bold
805[color "branch"]
806 current = green bold
807 remote = magenta bold
808[color "diff"]
809 new = green bold
810 old = red bold
811#+end_src
812
813**** status
814#+begin_src conf
815[status]
816 # showUntrackedFiles = all
817 short=true
818 branch=true
819#+end_src
820
821**** github
822#+begin_src conf
823[github]
824 user = aminb
825#+end_src
826
827**** send-email
828#+begin_src conf
829[sendemail]
830 smtpuser = bandali
831 smtpserver = fencepost.gnu.org
832 smtpserverport = 587
833 smtpencryption = tls
834 annotate = yes
835#+end_src
836
837*** gitignore
838:PROPERTIES:
839:header-args+: :tangle ~/.gitignore_global
840:END:
841
842#+begin_src conf
843*.orig
844*.py[co]
845*.sublime-workspace
846*~
847.DS_Store
848*.elc
849*-autoloads.el
850#+end_src
851
852** GnuPG
853:PROPERTIES:
854:header-args+: :tangle ~/.gnupg/gpg-agent.conf
855:END:
856
857#+begin_src conf
858default-cache-ttl 43200
859max-cache-ttl 43200
860
861default-cache-ttl-ssh 10800
862max-cache-ttl-ssh 10800
863
864# pinentry-program /usr/bin/pinentry-qt
865#+end_src
866
867** GTK
868
869*** gtk-2.0
870:PROPERTIES:
871:header-args+: :tangle ~/.gtkrc-2.0
872:END:
873
874#+begin_src conf
875gtk-theme-name="Greybird"
876gtk-icon-theme-name="Paper"
877gtk-font-name="Ubuntu 10"
878gtk-menu-images=0
879# gtk-key-theme-name = "Emacs"
880#+end_src
881
882*** gtk-3.0
883:PROPERTIES:
884:header-args+: :tangle ~/.config/gtk-3.0/settings.ini
885:END:
886
887#+begin_src conf :tangle no
888[Settings]
889gtk-icon-theme-name = Paper
890# gtk-theme-name = Adwaita
891
892gtk-theme-name = Greybird
893# gtk-theme-name = Arc-Darker
894# gtk-theme-name = Numix-ArchBlue
895
896gtk-font-name = Ubuntu 10
897# gtk-key-theme-name = Emacs
898#+end_src
899
900** [[https://github.com/Leinnan/i3gs][i3gs]]
901:PROPERTIES:
902:header-args+: :tangle ~/.config/i3gs/config
903:END:
904
905#+begin_src conf :comments none :tangle no
906borders_width=0 0 2 0
907separator_width=10
908
909#[mpd]
910#preset=MPD
911#title=<span weight='heavy' fgcolor='#7FDBFF'> </span>
912#borders_color=#7FDBFF
913
914[ram]
915preset=RAM
916title=<span weight='heavy' fgcolor='#3D9970'> </span>
917borders_color=#3D9970
918
919#[cpu]
920#preset=CPU
921#title=<span weight='heavy' fgcolor='#2ECC40'> </span>
922#borders_color=#2ECC40
923
924#[hdd]
925#preset=HDD
926#title=<span weight='heavy' fgcolor='#01FF70'> </span>
927#borders_color=#01FF70
928
929[volume]
930command=volume-info
931title=<span weight='heavy' fgcolor='#7FDBFF'></span>
932borders_color=#7FDBFF
933
934[battery]
935preset=BAT
936command=battery-percentage-time
937title=<span weight='heavy' fgcolor='#39CCCC'> </span>
938borders_color=#39CCCC
939
940[wifi]
941preset=WIFI
942title=<span weight='heavy' fgcolor='#01FF70'> </span>
943borders_color=#01FF70
944
945[date]
946preset=DATE
947command=date '+%-I:%M, %a %b %d '
948title=<span weight='heavy' fgcolor='#FFDC00'> </span>
949borders_color=#FFDC00
950separator_width=0
951#+end_src
952
953** i3status
954:PROPERTIES:
955:header-args+: :tangle ~/.config/i3status/config
956:END:
957
958#+begin_src conf :comments none
959# i3status configuration file.
960# see "man i3status" for documentation.
961
962# It is important that this file is edited as UTF-8.
963# The following line should contain a sharp s:
964# ß
965# If the above line is not correctly displayed, fix your editor first!
966
967general {
968 colors = true
969 interval = 5
970 output_format = "i3bar"
971}
972
973# order += "ipv6"
974order += "disk /"
975order += "disk /data"
976order += "wireless _first_"
977order += "ethernet _first_"
978order += "battery 0"
979order += "volume master"
980order += "load"
981order += "tztime local"
982
983wireless _first_ {
984 format_up = "W:%quality %essid %ip"
985 format_down = "W: down"
986}
987
988ethernet _first_ {
989 # if you use %speed, i3status requires root privileges
990 format_up = "E: %ip (%speed)"
991 format_down = "E: down"
992}
993
994battery 0 {
995 format = "%status %percentage %remaining (%consumption)"
996 path = "/sys/class/power_supply/BAT%d/uevent"
997 low_threshold = "10"
998 threshold_type = "percentage"
999 last_full_capacity = true
1000 integer_battery_capacity = true
1001 hide_seconds = true
1002}
1003
1004tztime local {
1005 format = "%-I:%M%P %a %b %d"
1006}
1007
1008volume master {
1009 format = "♪ %volume"
1010 format_muted = "🔇 %volume"
1011 device = "pulse"
1012}
1013
1014load {
1015 format = "%1min"
1016}
1017
1018disk "/" {
1019 format = "/ %avail"
1020}
1021
1022disk "/data" {
1023 format = "/data %avail"
1024}
1025#+end_src
1026
1027** isync
1028
1029*** mbsyncrc
1030:PROPERTIES:
1031:header-args+: :tangle ~/.mbsyncrc
1032:END:
1033
1034#+begin_src conf
1035# Global defaults
1036CopyArrivalDate yes
1037Create Both
1038Expunge Both
1039
1040######
1041IMAPAccount amin
1042Host mail.aminb.org
1043User amin@aminb.org
1044PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
1045SSLType IMAPS
1046
1047IMAPStore amin-remote
1048Account amin
1049
1050IMAPAccount amin-dovecot
1051Host 127.0.0.1
1052Port 143
1053User amin@aminb.org
1054PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin-dovecot.gpg"
1055SSLType None
1056
1057IMAPStore amin-local
1058Account amin-dovecot
1059
1060Channel amin
1061Master :amin-remote:
1062Slave :amin-local:
1063Patterns *
1064
1065######
1066IMAPAccount uwaterloo
1067Host connect.uwaterloo.ca
1068User abandali
1069PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
1070SSLType IMAPS
1071
1072IMAPStore uwaterloo-remote
1073Account uwaterloo
1074
1075IMAPAccount uwaterloo-dovecot
1076Host 127.0.0.1
1077Port 143
1078User abandali@uwaterloo.ca
1079PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo-dovecot.gpg"
1080SSLType None
1081
1082IMAPStore uwaterloo-local
1083Account uwaterloo-dovecot
1084
1085Channel uwaterloo
1086Master :uwaterloo-remote:
1087Slave :uwaterloo-local:
1088Patterns *
1089#+end_src
1090
1091*** mbsync.service
1092:PROPERTIES:
1093:header-args+: :tangle ~/.config/systemd/user/mbsync.service
1094:END:
1095
1096#+begin_src conf :tangle no
1097[Unit]
1098Description=mbsync service
1099
1100[Service]
1101Type=oneshot
1102ExecStart=/usr/bin/mbsync -Va
1103StandardOutput=syslog
1104StandardError=syslog
1105#+end_src
1106
1107*** mbsync.timer
1108:PROPERTIES:
1109:header-args+: :tangle ~/.config/systemd/user/mbsync.timer
1110:END:
1111
1112#+begin_src conf :tangle no
1113[Unit]
1114Description=mbsync timer
1115
1116[Timer]
1117OnCalendar=*:0/15
1118Persistent=true
1119Unit=mbsync.service
1120
1121[Install]
1122WantedBy=timers.target
1123#+end_src
1124
1125** Latexmk
1126:PROPERTIES:
1127:header-args+: :tangle ~/.latexmkrc
1128:END:
1129
1130#+begin_src conf
1131$pdf_previewer = "start zathura %O %S";
1132$clean_ext = "aux out";
1133
1134# $pdf_update_method = 4;
1135# $pdf_update_command = "zathura %O %S";
1136
1137# Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
1138# by Ctrl+click in the PDF.
1139# Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
1140# editor.
1141# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
1142#+end_src
1143
1144** libinput
1145
1146Improve XPS 15 9560's touchpad experience.
1147
1148# begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
1149#+begin_src conf :tangle no
1150Section "InputClass"
1151 Identifier "libinput touchpad catchall"
1152 Driver "libinput"
1153 MatchIsTouchpad "on"
1154 Option "ClickMethod" "clickfinger"
1155 Option "NaturalScrolling" "true"
1156 Option "Tapping" "on"
1157 Option "TappingButtonMap" "lrm"
1158EndSection
1159#+end_src
1160
1161** mpd
1162:PROPERTIES:
1163:header-args+: :tangle ~/.config/mpd/mpd.conf
1164:END:
1165
1166#+begin_src conf
1167# An example configuration file for MPD.
1168# Read the user manual for documentation: http://www.musicpd.org/doc/user/
1169
1170
1171# Files and directories #######################################################
1172#
1173# This setting controls the top directory which MPD will search to discover the
1174# available audio files and add them to the daemon's online database. This
1175# setting defaults to the XDG directory, otherwise the music directory will be
1176# be disabled and audio files will only be accepted over ipc socket (using
1177# file:// protocol) or streaming files over an accepted protocol.
1178#
1179music_directory "~/usr/music"
1180#
1181# This setting sets the MPD internal playlist directory. The purpose of this
1182# directory is storage for playlists created by MPD. The server will use
1183# playlist files not created by the server but only if they are in the MPD
1184# format. This setting defaults to playlist saving being disabled.
1185#
1186playlist_directory "~/.mpd/playlists"
1187#
1188# This setting sets the location of the MPD database. This file is used to
1189# load the database at server start up and store the database while the
1190# server is not up. This setting defaults to disabled which will allow
1191# MPD to accept files over ipc socket (using file:// protocol) or streaming
1192# files over an accepted protocol.
1193#
1194db_file "~/.mpd/database"
1195#
1196# These settings are the locations for the daemon log files for the daemon.
1197# These logs are great for troubleshooting, depending on your log_level
1198# settings.
1199#
1200# The special value "syslog" makes MPD use the local syslog daemon. This
1201# setting defaults to logging to syslog, otherwise logging is disabled.
1202#
1203log_file "~/.mpd/log"
1204#
1205# This setting sets the location of the file which stores the process ID
1206# for use of mpd --kill and some init scripts. This setting is disabled by
1207# default and the pid file will not be stored.
1208#
1209pid_file "~/.mpd/pid"
1210#
1211# This setting sets the location of the file which contains information about
1212# most variables to get MPD back into the same general shape it was in before
1213# it was brought down. This setting is disabled by default and the server
1214# state will be reset on server start up.
1215#
1216state_file "~/.mpd/state"
1217#
1218# The location of the sticker database. This is a database which
1219# manages dynamic information attached to songs.
1220#
1221sticker_file "~/.mpd/sticker.sql"
1222#
1223###############################################################################
1224
1225
1226# General music daemon options ################################################
1227#
1228# This setting specifies the user that MPD will run as. MPD should never run as
1229# root and you may use this setting to make MPD change its user ID after
1230# initialization. This setting is disabled by default and MPD is run as the
1231# current user.
1232#
1233#user "nobody"
1234#
1235# This setting specifies the group that MPD will run as. If not specified
1236# primary group of user specified with "user" setting will be used (if set).
1237# This is useful if MPD needs to be a member of group such as "audio" to
1238# have permission to use sound card.
1239#
1240#group "nogroup"
1241#
1242# This setting sets the address for the daemon to listen on. Careful attention
1243# should be paid if this is assigned to anything other then the default, any.
1244# This setting can deny access to control of the daemon. Not effective if
1245# systemd socket activiation is in use.
1246#
1247# For network
1248#bind_to_address "any"
1249#
1250# And for Unix Socket
1251#bind_to_address "~/.mpd/socket"
1252#
1253# This setting is the TCP port that is desired for the daemon to get assigned
1254# to.
1255#
1256#port "6600"
1257#
1258# This setting controls the type of information which is logged. Available
1259# setting arguments are "default", "secure" or "verbose". The "verbose" setting
1260# argument is recommended for troubleshooting, though can quickly stretch
1261# available resources on limited hardware storage.
1262#
1263#log_level "default"
1264#
1265# If you have a problem with your MP3s ending abruptly it is recommended that
1266# you set this argument to "no" to attempt to fix the problem. If this solves
1267# the problem, it is highly recommended to fix the MP3 files with vbrfix
1268# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
1269# point gapless MP3 playback can be enabled.
1270#
1271#gapless_mp3_playback "yes"
1272#
1273# Setting "restore_paused" to "yes" puts MPD into pause mode instead
1274# of starting playback after startup.
1275#
1276#restore_paused "no"
1277#
1278# This setting enables MPD to create playlists in a format usable by other
1279# music players.
1280#
1281#save_absolute_paths_in_playlists "no"
1282#
1283# This setting defines a list of tag types that will be extracted during the
1284# audio file discovery process. The complete list of possible values can be
1285# found in the user manual.
1286#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
1287#
1288# This setting enables automatic update of MPD's database when files in
1289# music_directory are changed.
1290#
1291#auto_update "yes"
1292#
1293# Limit the depth of the directories being watched, 0 means only watch
1294# the music directory itself. There is no limit by default.
1295#
1296#auto_update_depth "3"
1297#
1298###############################################################################
1299
1300
1301# Symbolic link behavior ######################################################
1302#
1303# If this setting is set to "yes", MPD will discover audio files by following
1304# symbolic links outside of the configured music_directory.
1305#
1306#follow_outside_symlinks "yes"
1307#
1308# If this setting is set to "yes", MPD will discover audio files by following
1309# symbolic links inside of the configured music_directory.
1310#
1311#follow_inside_symlinks "yes"
1312#
1313###############################################################################
1314
1315
1316# Zeroconf / Avahi Service Discovery ##########################################
1317#
1318# If this setting is set to "yes", service information will be published with
1319# Zeroconf / Avahi.
1320#
1321#zeroconf_enabled "yes"
1322#
1323# The argument to this setting will be the Zeroconf / Avahi unique name for
1324# this MPD server on the network.
1325#
1326#zeroconf_name "Music Player"
1327#
1328###############################################################################
1329
1330
1331# Permissions #################################################################
1332#
1333# If this setting is set, MPD will require password authorization. The password
1334# setting can be specified multiple times for different password profiles.
1335#
1336#password "password@read,add,control,admin"
1337#
1338# This setting specifies the permissions a user has who has not yet logged in.
1339#
1340#default_permissions "read,add,control,admin"
1341#
1342###############################################################################
1343
1344
1345# Database #######################################################################
1346#
1347
1348#database {
1349# plugin "proxy"
1350# host "other.mpd.host"
1351# port "6600"
1352#}
1353
1354# Input #######################################################################
1355#
1356
1357input {
1358 plugin "curl"
1359# proxy "proxy.isp.com:8080"
1360# proxy_user "user"
1361# proxy_password "password"
1362}
1363
1364#
1365###############################################################################
1366
1367# Audio Output ################################################################
1368#
1369
1370audio_output {
1371 type "pulse"
1372 name "pulse audio"
1373}
1374
1375audio_output {
1376 type "fifo"
1377 name "my_fifo"
1378 path "/tmp/mpd.fifo"
1379 format "44100:16:2"
1380}
1381
1382# MPD supports various audio output types, as well as playing through multiple
1383# audio outputs at the same time, through multiple audio_output settings
1384# blocks. Setting this block is optional, though the server will only attempt
1385# autodetection for one sound card.
1386#
1387# An example of an ALSA output:
1388#
1389#audio_output {
1390# type "alsa"
1391# name "My ALSA Device"
1392## device "hw:0,0" # optional
1393## mixer_type "hardware" # optional
1394## mixer_device "default" # optional
1395## mixer_control "PCM" # optional
1396## mixer_index "0" # optional
1397#}
1398#
1399# An example of an OSS output:
1400#
1401#audio_output {
1402# type "oss"
1403# name "My OSS Device"
1404## device "/dev/dsp" # optional
1405## mixer_type "hardware" # optional
1406## mixer_device "/dev/mixer" # optional
1407## mixer_control "PCM" # optional
1408#}
1409#
1410# An example of a shout output (for streaming to Icecast):
1411#
1412#audio_output {
1413# type "shout"
1414# encoder "vorbis" # optional
1415# name "My Shout Stream"
1416# host "localhost"
1417# port "8000"
1418# mount "/mpd.ogg"
1419# password "hackme"
1420# quality "5.0"
1421# bitrate "128"
1422# format "44100:16:1"
1423## protocol "icecast2" # optional
1424## user "source" # optional
1425## description "My Stream Description" # optional
1426## url "http://example.com" # optional
1427## genre "jazz" # optional
1428## public "no" # optional
1429## timeout "2" # optional
1430## mixer_type "software" # optional
1431#}
1432#
1433# An example of a recorder output:
1434#
1435#audio_output {
1436# type "recorder"
1437# name "My recorder"
1438# encoder "vorbis" # optional, vorbis or lame
1439# path "/var/lib/mpd/recorder/mpd.ogg"
1440## quality "5.0" # do not define if bitrate is defined
1441# bitrate "128" # do not define if quality is defined
1442# format "44100:16:1"
1443#}
1444#
1445# An example of a httpd output (built-in HTTP streaming server):
1446#
1447#audio_output {
1448# type "httpd"
1449# name "My HTTP Stream"
1450# encoder "vorbis" # optional, vorbis or lame
1451# port "8000"
1452# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
1453## quality "5.0" # do not define if bitrate is defined
1454# bitrate "128" # do not define if quality is defined
1455# format "44100:16:1"
1456# max_clients "0" # optional 0=no limit
1457#}
1458#
1459# An example of a pulseaudio output (streaming to a remote pulseaudio server)
1460#
1461#audio_output {
1462# type "pulse"
1463# name "My Pulse Output"
1464## server "remote_server" # optional
1465## sink "remote_server_sink" # optional
1466#}
1467#
1468# An example of a winmm output (Windows multimedia API).
1469#
1470#audio_output {
1471# type "winmm"
1472# name "My WinMM output"
1473## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1474# or
1475## device "0" # optional
1476## mixer_type "hardware" # optional
1477#}
1478#
1479# An example of an openal output.
1480#
1481#audio_output {
1482# type "openal"
1483# name "My OpenAL output"
1484## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1485#}
1486#
1487# An example of an sndio output.
1488#
1489#audio_output {
1490# type "sndio"
1491# name "sndio output"
1492# mixer_type "software"
1493#}
1494#
1495# An example of an OS X output:
1496#
1497#audio_output {
1498# type "osx"
1499# name "My OS X Device"
1500## device "Built-in Output" # optional
1501## channel_map "-1,-1,0,1" # optional
1502#}
1503#
1504## Example "pipe" output:
1505#
1506#audio_output {
1507# type "pipe"
1508# name "my pipe"
1509# command "aplay -f cd 2>/dev/null"
1510## Or if you're want to use AudioCompress
1511# command "AudioCompress -m | aplay -f cd 2>/dev/null"
1512## Or to send raw PCM stream through PCM:
1513# command "nc example.org 8765"
1514# format "44100:16:2"
1515#}
1516#
1517## An example of a null output (for no audio output):
1518#
1519#audio_output {
1520# type "null"
1521# name "My Null Output"
1522# mixer_type "none" # optional
1523#}
1524#
1525###############################################################################
1526
1527
1528# Normalization automatic volume adjustments ##################################
1529#
1530# This setting specifies the type of ReplayGain to use. This setting can have
1531# the argument "off", "album", "track" or "auto". "auto" is a special mode that
1532# chooses between "track" and "album" depending on the current state of
1533# random playback. If random playback is enabled then "track" mode is used.
1534# See <http://www.replaygain.org> for more details about ReplayGain.
1535# This setting is off by default.
1536#
1537#replaygain "album"
1538#
1539# This setting sets the pre-amp used for files that have ReplayGain tags. By
1540# default this setting is disabled.
1541#
1542#replaygain_preamp "0"
1543#
1544# This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1545# By default this setting is disabled.
1546#
1547#replaygain_missing_preamp "0"
1548#
1549# This setting enables or disables ReplayGain limiting.
1550# MPD calculates actual amplification based on the ReplayGain tags
1551# and replaygain_preamp / replaygain_missing_preamp setting.
1552# If replaygain_limit is enabled MPD will never amplify audio signal
1553# above its original level. If replaygain_limit is disabled such amplification
1554# might occur. By default this setting is enabled.
1555#
1556#replaygain_limit "yes"
1557#
1558# This setting enables on-the-fly normalization volume adjustment. This will
1559# result in the volume of all playing audio to be adjusted so the output has
1560# equal "loudness". This setting is disabled by default.
1561#
1562#volume_normalization "no"
1563#
1564###############################################################################
1565
1566# Character Encoding ##########################################################
1567#
1568# If file or directory names do not display correctly for your locale then you
1569# may need to modify this setting.
1570#
1571#filesystem_charset "UTF-8"
1572#
1573###############################################################################
1574#+end_src
1575
1576** msmtp
1577:PROPERTIES:
1578:header-args+: :tangle ~/.msmtprc
1579:END:
1580
1581#+begin_src conf
1582# Set default values for all following accounts.
1583defaults
1584port 587
1585tls on
1586auth on
1587#tls_trust_file /etc/ssl/certs/ca-certificates.crt
1588logfile ~/.msmtp.log
1589
1590# aminb
1591account aminb
1592host mail.aminb.org
1593# use `msmtp -a aminb --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1594tls_fingerprint C7:A4:2E:A3:11:FA:80:45:C4:29:D6:62:4D:73:DB:34:43:67:8F:16:F1:2E:54:43:06:1B:41:B6:A9:09:E0:37
1595tls_starttls on
1596from amin@aminb.org
1597user amin@aminb.org
1598passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
1599
1600account bandali-me : aminb
1601from amin@bandali.me
1602
1603# gnu
1604account gnu
1605host fencepost.gnu.org
1606# use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1607tls_fingerprint 93:59:52:1D:A6:95:13:31:7C:81:ED:DB:A5:BA:B5:2B:C8:BC:38:3E:71:A5:DF:8C:80:46:C1:E0:5D:2D:F4:E3
1608tls_starttls on
1609from bandali@gnu.org
1610user bandali
1611passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
1612
1613# gnu (old)
1614account gnu-aminb : gnu
1615from aminb@gnu.org
1616account gnu-amin : gnu
1617from amin@gnu.org
1618account gnu-mab : gnu
1619from mab@gnu.org
1620
1621# uwaterloo
1622account uwaterloo
1623host connect.uwaterloo.ca
1624tls_starttls on
1625from abandali@uwaterloo.ca
1626user abandali
1627passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
1628tls_trust_file /etc/ssl/certs/ca-certificates.crt
1629
1630# Set a default account
1631account default : aminb
1632#+end_src
1633
1634** ncmpcpp
1635
1636*** config
1637:PROPERTIES:
1638:header-args+: :tangle ~/.ncmpcpp/config
1639:END:
1640
1641#+begin_src conf :tangle no
1642##############################################################
1643## This is the example configuration file. Copy it to ##
1644## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
1645## and set up your preferences. ##
1646##############################################################
1647#
1648##### directories ######
1649##
1650## Directory for storing ncmpcpp related files.
1651## Changing it is useful if you want to store
1652## everything somewhere else and provide command
1653## line setting for alternative location to config
1654## file which defines that while launching ncmpcpp.
1655##
1656#
1657ncmpcpp_directory = ~/.ncmpcpp
1658#
1659##
1660## Directory for storing downloaded lyrics. It
1661## defaults to ~/.lyrics since other MPD clients
1662## (eg. ncmpc) also use that location.
1663##
1664#
1665#lyrics_directory = ~/.lyrics
1666#
1667##### connection settings #####
1668#
1669#mpd_host = localhost
1670#
1671#mpd_port = 6600
1672#
1673#mpd_connection_timeout = 5
1674#
1675## Needed for tag editor and file operations to work.
1676##
1677mpd_music_dir = ~/usr/music
1678#
1679#mpd_crossfade_time = 5
1680#
1681##### music visualizer #####
1682##
1683## Note: In order to make music visualizer work you'll
1684## need to use mpd fifo output, whose format parameter
1685## has to be set to 44100:16:1 for mono visualization
1686## or 44100:16:2 for stereo visualization. Example
1687## configuration (it has to be put into mpd.conf):
1688##
1689## audio_output {
1690## type "fifo"
1691## name "Visualizer feed"
1692## path "/tmp/mpd.fifo"
1693## format "44100:16:2"
1694## }
1695##
1696#
1697visualizer_fifo_path = /tmp/mpd.fifo
1698#
1699##
1700## Note: Below parameter is needed for ncmpcpp
1701## to determine which output provides data for
1702## visualizer and thus allow syncing between
1703## visualization and sound as currently there
1704## are some problems with it.
1705##
1706#
1707visualizer_output_name = my fifo
1708#
1709##
1710## If you set format to 44100:16:2, make it 'yes'.
1711##
1712visualizer_in_stereo = yes
1713#
1714##
1715## Multiply received samples by given value. Very
1716## useful for proper visualization of quiet music.
1717##
1718#visualizer_sample_multiplier = 1
1719#
1720##
1721## Note: Below parameter defines how often ncmpcpp
1722## has to "synchronize" visualizer and audio outputs.
1723## 30 seconds is optimal value, but if you experience
1724## synchronization problems, set it to lower value.
1725## Keep in mind that sane values start with >=10.
1726##
1727#
1728visualizer_sync_interval = 30
1729#
1730##
1731## Note: To enable spectrum frequency visualization
1732## you need to compile ncmpcpp with fftw3 support.
1733##
1734#
1735## Available values: spectrum, wave, wave_filled, ellipse.
1736##
1737visualizer_type = spectrum
1738#
1739#visualizer_look = ●▮
1740visualizer_look = "●•"
1741#
1742#visualizer_color = blue, cyan, green, yellow, magenta, red
1743#
1744## Alternative subset of 256 colors for terminals that support it.
1745##
1746#visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
1747#
1748##### system encoding #####
1749##
1750## ncmpcpp should detect your charset encoding
1751## but if it failed to do so, you can specify
1752## charset encoding you are using here.
1753##
1754## Note: You can see whether your ncmpcpp build
1755## supports charset detection by checking output
1756## of `ncmpcpp --version`.
1757##
1758## Note: Since MPD uses UTF-8 by default, setting
1759## this option makes sense only if your encoding
1760## is different.
1761##
1762#
1763#system_encoding = ""
1764#
1765##### delays #####
1766#
1767## Time of inactivity (in seconds) after playlist
1768## highlighting will be disabled (0 = always on).
1769##
1770#playlist_disable_highlight_delay = 5
1771#
1772## Defines how long messages are supposed to be visible.
1773##
1774#message_delay_time = 5
1775#
1776##### song format #####
1777##
1778## For a song format you can use:
1779##
1780## %l - length
1781## %f - filename
1782## %D - directory
1783## %a - artist
1784## %A - album artist
1785## %t - title
1786## %b - album
1787## %y - date
1788## %n - track number (01/12 -> 01)
1789## %N - full track info (01/12 -> 01/12)
1790## %g - genre
1791## %c - composer
1792## %p - performer
1793## %d - disc
1794## %C - comment
1795## %P - priority
1796## $R - begin right alignment
1797##
1798## If you want to make sure that a part of the format is displayed
1799## only when certain tags are present, you can archieve it by
1800## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
1801## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
1802## It is also possible to define a list of alternatives by providing
1803## several groups and separating them with '|', e.g. '{%t}|{%f}'
1804## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
1805## present.
1806##
1807## Note: If you want to set limit on maximal length of a tag, just
1808## put the appropriate number between % and character that defines
1809## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
1810##
1811## In addition, formats support markers used for text attributes.
1812## They are followed by character '$'. After that you can put:
1813##
1814## - 0 - default window color (discards all other colors)
1815## - 1 - black
1816## - 2 - red
1817## - 3 - green
1818## - 4 - yellow
1819## - 5 - blue
1820## - 6 - magenta
1821## - 7 - cyan
1822## - 8 - white
1823## - 9 - end of current color
1824## - b - bold text
1825## - u - underline text
1826## - r - reverse colors
1827## - a - use alternative character set
1828##
1829## If you don't want to use a non-color attribute anymore, just put it
1830## again, but this time insert character '/' between '$' and attribute
1831## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
1832## or filename with reversed colors.
1833##
1834## If you want to use 256 colors and/or background colors in formats
1835## (the naming scheme is described below in section about color
1836## definitions), it can be done with the syntax $(COLOR), e.g. to set
1837## the artist tag to one of the non-standard colors and make it have
1838## yellow background, you need to write $(197_yellow)%a$(end). Note
1839## that for standard colors this is interchangable with attributes
1840## listed above.
1841##
1842## Note: colors can be nested.
1843##
1844#
1845#song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
1846#
1847#song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
1848#
1849#song_library_format = {%n - }{%t}|{%f}
1850#
1851#
1852#alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
1853#
1854#alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
1855#
1856#now_playing_prefix = $b
1857#
1858#now_playing_suffix = $/b
1859#
1860#browser_playlist_prefix = "$2playlist$9 "
1861#
1862#selected_item_prefix = $6
1863#
1864#selected_item_suffix = $9
1865#
1866#modified_item_prefix = $3> $9
1867#
1868##
1869## Note: attributes are not supported for the following variables.
1870##
1871#song_window_title_format = {%a - }{%t}|{%f}
1872##
1873## Note: Below variables are used for sorting songs in browser.
1874## The sort mode determines how songs are sorted, and can be used
1875## in combination with a sort format to specify a custom sorting format.
1876## Available values for browser_sort_mode are "name", "mtime", "format"
1877## and "noop".
1878##
1879#
1880#browser_sort_mode = name
1881#
1882#browser_sort_format = {%a - }{%t}|{%f} {(%l)}
1883#
1884##### columns settings #####
1885##
1886## syntax of song columns list format is "column column etc."
1887##
1888## - syntax for each column is:
1889##
1890## (width of the column)[color of the column]{displayed tag}
1891##
1892## Note: Width is by default in %, if you want a column to
1893## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
1894## will be the column that take 10% of screen (so the real width
1895## will depend on actual screen size), whereas (10f)[white]{a}
1896## will take 10 terminal cells, no matter how wide the screen is.
1897##
1898## - color is optional (if you want the default one,
1899## leave the field empty).
1900##
1901## Note: You can give a column additional attributes by putting appropriate
1902## character after displayed tag character. Available attributes are:
1903##
1904## - r - column will be right aligned
1905## - E - if tag is empty, empty tag marker won't be displayed
1906##
1907## You can also:
1908##
1909## - give a column custom name by putting it after attributes,
1910## separated with character ':', e.g. {lr:Length} gives you
1911## right aligned column of lengths named "Length".
1912##
1913## - define sequence of tags, that have to be displayed in case
1914## predecessor is empty in a way similar to the one in classic
1915## song format, i.e. using '|' character, e.g. {a|c|p:Owner}
1916## creates column named "Owner" that tries to display artist
1917## tag and then composer and performer if previous ones are
1918## not available.
1919##
1920#
1921#song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
1922#
1923##### various settings #####
1924#
1925##
1926## Note: Custom command that will be executed each
1927## time song changes. Useful for notifications etc.
1928##
1929#execute_on_song_change = ""
1930#
1931#playlist_show_mpd_host = no
1932#
1933#playlist_show_remaining_time = no
1934#
1935#playlist_shorten_total_times = no
1936#
1937#playlist_separate_albums = no
1938#
1939##
1940## Note: Possible display modes: classic, columns.
1941##
1942#playlist_display_mode = columns
1943#
1944#browser_display_mode = classic
1945#
1946#search_engine_display_mode = classic
1947#
1948#playlist_editor_display_mode = classic
1949#
1950#discard_colors_if_item_is_selected = yes
1951#
1952#incremental_seeking = yes
1953#
1954#seek_time = 1
1955#
1956#volume_change_step = 2
1957#
1958#autocenter_mode = no
1959#
1960#centered_cursor = no
1961#
1962##
1963## Note: You can specify third character which will
1964## be used to build 'empty' part of progressbar.
1965##
1966#progressbar_look = =>
1967progressbar_look = "─╼╶"
1968#progressbar_look = "─⊙╶"
1969#
1970#progressbar_boldness = yes
1971#
1972## Available values: database, playlist.
1973##
1974#default_place_to_search_in = database
1975#
1976## Available values: classic, alternative.
1977##
1978#user_interface = classic
1979#
1980#data_fetching_delay = yes
1981#
1982## Available values: artist, album_artist, date, genre, composer, performer.
1983##
1984#media_library_primary_tag = artist
1985#
1986## Available values: wrapped, normal.
1987##
1988#default_find_mode = wrapped
1989#
1990#default_tag_editor_pattern = %n - %t
1991#
1992#header_visibility = yes
1993#
1994#statusbar_visibility = yes
1995#
1996#titles_visibility = yes
1997#
1998#header_text_scrolling = yes
1999#
2000#cyclic_scrolling = no
2001#
2002#lines_scrolled = 2
2003#
2004#follow_now_playing_lyrics = no
2005#
2006#fetch_lyrics_for_current_song_in_background = no
2007#
2008#store_lyrics_in_song_dir = no
2009#
2010#generate_win32_compatible_filenames = yes
2011#
2012#allow_for_physical_item_deletion = no
2013#
2014##
2015## Note: If you set this variable, ncmpcpp will try to
2016## get info from last.fm in language you set and if it
2017## fails, it will fall back to english. Otherwise it will
2018## use english the first time.
2019##
2020## Note: Language has to be expressed as an ISO 639 alpha-2 code.
2021##
2022#lastfm_preferred_language = en
2023#
2024#show_hidden_files_in_local_browser = no
2025#
2026##
2027## How shall screen switcher work?
2028##
2029## - "previous" - switch between the current and previous screen.
2030## - "screen1,...,screenN" - switch between given sequence of screens.
2031##
2032## Screens available for use: help, playlist, browser, search_engine,
2033## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
2034##
2035#screen_switcher_mode = playlist, browser
2036#
2037##
2038## Note: You can define startup screen
2039## by choosing screen from the list above.
2040##
2041#startup_screen = playlist
2042#
2043##
2044## Note: You can define startup slave screen
2045## by choosing screen from the list above or
2046## an empty value for no slave screen.
2047##
2048#startup_slave_screen = ""
2049#
2050#startup_slave_screen_focus = no
2051#
2052##
2053## Default width of locked screen (in %).
2054## Acceptable values are from 20 to 80.
2055##
2056#
2057#locked_screen_width_part = 50
2058#
2059#ask_for_locked_screen_width_part = yes
2060#
2061#jump_to_now_playing_song_at_start = yes
2062#
2063#ask_before_clearing_playlists = yes
2064#
2065#clock_display_seconds = no
2066#
2067#display_volume_level = yes
2068#
2069#display_bitrate = no
2070#
2071#display_remaining_time = no
2072#
2073## Available values: none, basic, extended, perl.
2074##
2075#regular_expressions = perl
2076#
2077##
2078## Note: If below is enabled, ncmpcpp will ignore leading
2079## "The" word while sorting items in browser, tags in
2080## media library, etc.
2081##
2082#ignore_leading_the = no
2083#
2084#block_search_constraints_change_if_items_found = yes
2085#
2086#mouse_support = yes
2087#
2088#mouse_list_scroll_whole_page = yes
2089#
2090#empty_tag_marker = <empty>
2091#
2092#tags_separator = " | "
2093#
2094#tag_editor_extended_numeration = no
2095#
2096#media_library_sort_by_mtime = no
2097#
2098#enable_window_title = yes
2099#
2100##
2101## Note: You can choose default search mode for search
2102## engine. Available modes are:
2103##
2104## - 1 - use mpd built-in searching (no regexes, pattern matching)
2105## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
2106## but if your mpd is on a remote machine, downloading big database
2107## to process it can take a while
2108## - 3 - match only exact values (this mode uses mpd function for searching
2109## in database and local one for searching in current playlist)
2110##
2111#
2112#search_engine_default_search_mode = 1
2113#
2114#external_editor = nano
2115#
2116## Note: set to yes if external editor is a console application.
2117##
2118#use_console_editor = yes
2119#
2120##### colors definitions #####
2121##
2122## It is possible to set a background color by setting a color
2123## value "<foreground>_<background>", e.g. red_black will set
2124## foregound color to red and background color to black.
2125##
2126## In addition, for terminals that support 256 colors it
2127## is possible to set one of them by using a number in range
2128## [1, 256] instead of color name, e.g. numerical value
2129## corresponding to red_black is 2_1. To find out if the
2130## terminal supports 256 colors, run ncmpcpp and check out
2131## the bottom of the help screen for list of available colors
2132## and their numerical values.
2133##
2134## Note: due to technical limitations of ncurses, if 256 colors
2135## are used, it is possible to either use only the colors with
2136## default background color, or all pairs from 1_1 up to 254_127,
2137## depending on the ncurses version used.
2138##
2139#
2140#colors_enabled = yes
2141#
2142#empty_tag_color = cyan
2143#
2144#header_window_color = default
2145#
2146#volume_color = default
2147#
2148#state_line_color = default
2149#
2150#state_flags_color = default
2151#
2152#main_window_color = yellow
2153#
2154#color1 = white
2155#
2156#color2 = green
2157#
2158#main_window_highlight_color = yellow
2159#
2160#progressbar_color = black
2161#
2162#progressbar_elapsed_color = green
2163#
2164#statusbar_color = default
2165#
2166#alternative_ui_separator_color = black
2167#
2168#active_column_color = red
2169#
2170#window_border_color = green
2171#
2172#active_window_border = red
2173#
2174#+end_src
2175
2176*** bindings
2177:PROPERTIES:
2178:header-args+: :tangle ~/.ncmpcpp/bindings
2179:END:
2180
2181#+begin_src conf :tangle no
2182def_key "j"
2183 scroll_down
2184def_key "k"
2185 scroll_up
2186
2187def_key "ctrl-u"
2188 page_up
2189def_key "ctrl-d"
2190 page_down
2191
2192def_key "h"
2193 previous_column
2194def_key "l"
2195 next_column
2196
2197def_key "."
2198 show_lyrics
2199
2200def_key "n"
2201 next_found_item
2202def_key "N"
2203 previous_found_item
2204
2205def_key "J"
2206 move_sort_order_down
2207def_key "K"
2208 move_sort_order_up
2209#+end_src
2210
2211** notmuch
2212
2213*** notmuch-config
2214:PROPERTIES:
2215:header-args+: :tangle ~/.notmuch-config
2216:END:
2217
2218#+begin_src conf
2219# .notmuch-config - Configuration file for the notmuch mail system
2220#
2221# For more information about notmuch, see https://notmuchmail.org
2222
2223# Database configuration
2224#
2225# The only value supported here is 'path' which should be the top-level
2226# directory where your mail currently exists and to where mail will be
2227# delivered in the future. Files should be individual email messages.
2228# Notmuch will store its database within a sub-directory of the path
2229# configured here named ".notmuch".
2230#
2231[database]
2232path=/home/amin/oldmail
2233
2234# User configuration
2235#
2236# Here is where you can let notmuch know how you would like to be
2237# addressed. Valid settings are
2238#
2239# name Your full name.
2240# primary_email Your primary email address.
2241# other_email A list (separated by ';') of other email addresses
2242# at which you receive email.
2243#
2244# Notmuch will use the various email addresses configured here when
2245# formatting replies. It will avoid including your own addresses in the
2246# recipient list of replies, and will set the From address based on the
2247# address to which the original email was addressed.
2248#
2249[user]
2250name=Amin Bandali
2251primary_email=amin@aminb.org
2252other_email=bandali@gnu.org;abandali@uwaterloo.ca;
2253
2254# Configuration for "notmuch new"
2255#
2256# The following options are supported here:
2257#
2258# tags A list (separated by ';') of the tags that will be
2259# added to all messages incorporated by "notmuch new".
2260#
2261# ignore A list (separated by ';') of file and directory names
2262# that will not be searched for messages by "notmuch new".
2263#
2264# NOTE: *Every* file/directory that goes by one of those
2265# names will be ignored, independent of its depth/location
2266# in the mail store.
2267#
2268[new]
2269tags=new;
2270#tags=unread;inbox;
2271ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
2272
2273# Search configuration
2274#
2275# The following option is supported here:
2276#
2277# exclude_tags
2278# A ;-separated list of tags that will be excluded from
2279# search results by default. Using an excluded tag in a
2280# query will override that exclusion.
2281#
2282[search]
2283exclude_tags=deleted;spam;
2284
2285# Maildir compatibility configuration
2286#
2287# The following option is supported here:
2288#
2289# synchronize_flags Valid values are true and false.
2290#
2291# If true, then the following maildir flags (in message filenames)
2292# will be synchronized with the corresponding notmuch tags:
2293#
2294# Flag Tag
2295# ---- -------
2296# D draft
2297# F flagged
2298# P passed
2299# R replied
2300# S unread (added when 'S' flag is not present)
2301#
2302# The "notmuch new" command will notice flag changes in filenames
2303# and update tags, while the "notmuch tag" and "notmuch restore"
2304# commands will notice tag changes and update flags in filenames
2305#
2306[maildir]
2307synchronize_flags=true
2308
2309# Cryptography related configuration
2310#
2311# The following option is supported here:
2312#
2313# gpg_path
2314# binary name or full path to invoke gpg.
2315#
2316[crypto]
2317gpg_path=gpg
2318#+end_src
2319
2320*** pre-new hook
2321:PROPERTIES:
2322:header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
2323:END:
2324
2325#+begin_src sh
2326touch /tmp/gnusieve.log
2327sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
2328 -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
2329#+end_src
2330
2331*** post-new hook
2332:PROPERTIES:
2333:header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
2334:END:
2335
2336#+begin_src sh
2337# apply sent tag to messages sent by me
2338notmuch tag -new +sent -- from:amin@aminb.org or from:bandali@gnu.org or from:aminb@gnu.org or from:amin@gnu.org or from:mab@gnu.org or from:abandali@uwaterloo.ca
2339
2340# initial tagging
2341notmuch tag -latest -- tag:latest
2342notmuch tag +inbox +unread +latest -new -- tag:new
2343
2344
2345# apply tags to lists
2346
2347# <aminb>
2348notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
2349notmuch tag -inbox +lists/haskell-weekly -- folder:amin/lists/haskell-weekly
2350
2351notmuch tag -inbox +pay -- folder:amin/pay
2352notmuch tag -inbox +banking -- folder:amin/banking
2353notmuch tag -inbox +work -- folder:amin/work
2354# </aminb>
2355
2356# <uw>
2357notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
2358notmuch tag -inbox +uw/cs846 -- folder:uwaterloo/lists/cs846
2359notmuch tag -inbox +uw/ece750 -- folder:uwaterloo/lists/ece750
2360notmuch tag -inbox +uw/se212 -- folder:uwaterloo/lists/se212
2361notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
2362
2363notmuch tag -inbox +lists/alloytools -- folder:uwaterloo/lists/alloytools
2364notmuch tag -inbox +lists/clvsingle -- folder:uwaterloo/lists/Clvsingle
2365notmuch tag -inbox +lists/gsa -- folder:uwaterloo/lists/GSA
2366notmuch tag -inbox +lists/math-grad -- folder:uwaterloo/lists/Math-grad
2367notmuch tag -inbox +lists/scs-grads -- folder:uwaterloo/lists/scs-grads
2368notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
2369# </uw>
2370
2371# <gnu>
2372notmuch tag -inbox +l/emacs-devel -- folder:gnu/l/emacs-devel
2373notmuch tag -inbox +l/emacs-orgmode -- folder:gnu/l/emacs-orgmode
2374notmuch tag -inbox +l/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
2375notmuch tag -inbox +l/fencepost-users -- folder:gnu/l/fencepost-users
2376notmuch tag -inbox +l/guix-devel -- folder:gnu/l/guix-devel
2377notmuch tag -inbox +l/guile-devel -- folder:gnu/l/guile-devel
2378notmuch tag -inbox +l/help-gnu-emacs -- folder:gnu/l/help-gnu-emacs
2379notmuch tag -inbox +l/info-gnu-emacs -- folder:gnu/l/info-gnu-emacs
2380notmuch tag -inbox +l/www-commits -- folder:gnu/l/www-commits
2381notmuch tag -inbox +l/www-discuss -- folder:gnu/l/www-discuss
2382notmuch tag -inbox +webmasters -- folder:gnu/webmasters
2383
2384notmuch tag -inbox +l/deepspec -- folder:gnu/l/deepspec
2385notmuch tag -inbox +l/haskell-cafe -- folder:gnu/l/haskell-cafe
2386notmuch tag -inbox +l/haskell-art -- folder:gnu/l/haskell-art
2387notmuch tag -inbox +l/notmuch -- folder:gnu/l/notmuch
2388
2389notmuch tag -inbox +l/~aminb/test-priv -- folder:gnu/l/~aminb/test-priv
2390notmuch tag -inbox +l/~sircmpwn/sr.ht-admins -- folder:gnu/l/~sircmpwn/sr.ht-admins
2391notmuch tag -inbox +l/~sircmpwn/sr.ht-announce -- folder:gnu/l/~sircmpwn/sr.ht-announce
2392notmuch tag -inbox +l/~sircmpwn/sr.ht-dev -- folder:gnu/l/~sircmpwn/sr.ht-dev
2393notmuch tag -inbox +l/~sircmpwn/sr.ht-discuss -- folder:gnu/l/~sircmpwn/sr.ht-discuss
2394# </gnu>
2395
2396notmuch tag -inbox -unread +archive/notmuch -- path:archive/notmuch/**
2397notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**
2398#+end_src
2399
2400*** notmuch.service
2401:PROPERTIES:
2402:header-args+: :tangle ~/.config/systemd/user/notmuch.service
2403:END:
2404
2405#+begin_src conf :tangle no
2406[Unit]
2407Description=notmuch service
2408
2409[Service]
2410Type=oneshot
2411ExecStart=/usr/bin/notmuch new
2412StandardOutput=syslog
2413StandardError=syslog
2414#+end_src
2415
2416*** notmuch.timer
2417:PROPERTIES:
2418:header-args+: :tangle ~/.config/systemd/user/notmuch.timer
2419:END:
2420
2421#+begin_src conf :tangle no
2422[Unit]
2423Description=notmuch timer
2424
2425[Timer]
2426OnCalendar=*:0/5
2427Persistent=true
2428Unit=notmuch.service
2429
2430[Install]
2431WantedBy=timers.target
2432#+end_src
2433
2434** offlineimap
2435
2436*** offlineimaprc
2437:PROPERTIES:
2438:header-args+: :tangle ~/.offlineimaprc
2439:END:
2440
2441#+begin_src conf :tangle no
2442[general]
2443pythonfile = ~/.offlineimap.py
2444accounts = Gmail, aminb
2445maxsyncaccounts = 3
2446
2447[Account Gmail]
2448localrepository = GmailL
2449remoterepository = GmailR
2450
2451[Account aminb]
2452localrepository = aminbL
2453remoterepository = aminbR
2454
2455[Repository GmailL]
2456type = Maildir
2457localfolders = ~/Maildir/Gmail
2458
2459[Repository GmailR]
2460type = IMAP
2461remotehost = imap.gmail.com
2462remoteusereval = mailuser("gmail")
2463remotepasseval = mailpasswd("gmail")
2464sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2465ssl = yes
2466folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
2467maxconnections = 1
2468realdelete = no
2469
2470[Repository aminbL]
2471type = Maildir
2472localfolders = ~/Maildir/aminb
2473
2474[Repository aminbR]
2475type = IMAP
2476remotehost = mail.aminb.org
2477remoteusereval = mailuser("aminb")
2478remotepasseval = mailpasswd("aminb")
2479sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2480ssl = yes
2481folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
2482maxconnections = 1
2483realdelete = no
2484#+end_src
2485
2486*** offlineimap.py
2487:PROPERTIES:
2488:header-args+: :tangle ~/.offlineimap.py
2489:END:
2490
2491#+begin_src python :tangle no
2492import os
2493import subprocess
2494
2495def mailpasswd(acct):
2496 acct = os.path.basename(acct)
2497 path = "/home/amin/.passwd/%s.gpg" % acct
2498 args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
2499 try:
2500 return subprocess.check_output(args).strip()
2501 except subprocess.CalledProcessError:
2502 return ""
2503
2504def mailuser(acct):
2505 acct = os.path.basename(acct)
2506 path = "/home/amin/.passwd/%s" % acct
2507 args = ["cat", path]
2508 try:
2509 return subprocess.check_output(args).strip()
2510 except subprocess.CalledProcessError:
2511 return ""
2512
2513def prime_gpg_agent():
2514 ret = False
2515 i = 1
2516 while not ret:
2517 ret = (mailpasswd("prime") == "prime")
2518 if i > 2:
2519 from offlineimap.ui import getglobalui
2520 sys.stderr.write("Error reading in passwords. Terminating.\n")
2521 getglobalui().terminate()
2522 i += 1
2523 return ret
2524
2525prime_gpg_agent()
2526#+end_src
2527
2528** pigeonhole
2529*** amin.sieve
2530:PROPERTIES:
2531:header-args+: :tangle ~/mail/aminb.org/amin/sieve/amin.sieve :comments none
2532:END:
2533
2534#+begin_src conf
2535require ["regex", "variables", "fileinto", "envelope",
2536 "mailbox", "imap4flags", "include"];
2537
2538# webmasters
2539if anyof (
2540 address :is "from" ["webmasters@gnu.org", "webmasters-comment@gnu.org"]) {
2541 fileinto :create "gnu.webmasters";
2542 stop;
2543}
2544
2545include :personal "lists";
2546#+end_src
2547
2548*** lists.sieve
2549:PROPERTIES:
2550:header-args+: :tangle ~/mail/aminb.org/amin/sieve/lists.sieve :comments none
2551:END:
2552
2553#+begin_src conf
2554require ["regex", "variables", "fileinto", "envelope",
2555 "mailbox", "imap4flags", "include"];
2556
2557# mailing lists
2558if anyof (
2559 header :contains "list-id"
2560 [ "<emacs-devel.gnu.org>"
2561 , "<emacs-orgmode.gnu.org>"
2562 , "<emacsconf-discuss.gnu.org>"
2563 , "<fencepost-users.gnu.org>"
2564 , "<guix-devel.gnu.org>"
2565 , "<guile-devel.gnu.org>"
2566 , "<help-gnu-emacs.gnu.org>"
2567 , "<info-gnu-emacs.gnu.org>"
2568 , "<info-guix.gnu.org>"
2569 , "<www-commits.gnu.org>"
2570 , "<www-discuss.gnu.org>"
2571 , "<deepspec.lists.cs.princeton.edu>"
2572 , "<haskell-cafe.haskell.org>"
2573 , "<haskell-art.we.lurk.org>"
2574 , "<notmuch.notmuchmail.org>"
2575 ] ) {
2576 if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
2577 set :lower "listname" "${1}";
2578 fileinto :create "gnu.${listname}";
2579 stop;
2580 }
2581}
2582
2583# sr.ht lists, with dots ('.') omitted
2584if anyof (
2585 header :contains "list-id"
2586 [ "<~bandali/public-inbox@lists.sr.ht>"
2587 , "<~sircmpwn/sr.ht-admins@lists.sr.ht>"
2588 , "<~sircmpwn/sr.ht-announce@lists.sr.ht>"
2589 , "<~sircmpwn/sr.ht-dev@lists.sr.ht>"
2590 , "<~sircmpwn/sr.ht-discuss@lists.sr.ht>"
2591 ] ) {
2592 if header :regex "list-id" "(~[a-z_0-9-]+)/([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)@" {
2593 set :lower "username" "${1}";
2594 set :lower "listname" "${2}${3}${4}${5}${6}${7}";
2595 fileinto :create "gnu.${username}.${listname}";
2596 stop;
2597 }
2598}
2599#+end_src
2600
2601** polybar
2602
2603*** config
2604:PROPERTIES:
2605:header-args+: :tangle ~/.config/polybar/config
2606:END:
2607
2608#+begin_src conf :tangle no
2609;=====================================================
2610;
2611; To learn more about how to configure Polybar
2612; go to https://github.com/jaagr/polybar
2613;
2614; The README contains alot of information
2615;
2616;=====================================================
2617
2618[colors]
2619;background = ${xrdb:color0:#222}
2620background = #222
2621background-alt = #444
2622;foreground = ${xrdb:color7:#222}
2623foreground = #eee
2624foreground-alt = #888
2625primary = #ffb52a
2626secondary = #e60053
2627alert = #bd2c40
2628
2629[bar/main]
2630;monitor = ${env:MONITOR:HDMI-1}
2631width = 100%
2632height = 27
2633;offset-x = 1%
2634;offset-y = 1%
2635radius = 3.0
2636fixed-center = true
2637
2638background = ${colors.background}
2639foreground = ${colors.foreground}
2640
2641line-size = 3
2642line-color = #f00
2643
2644border-size = 4
2645border-color = #00000000
2646
2647padding-left = 0
2648padding-right = 2
2649
2650module-margin-left = 2
2651module-margin-right = 2
2652
2653font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
2654font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
2655font-2 = Wuncon Siji:pixelsize=10;1
2656font-3 = FontAwesome:pixelsize=10;1
2657
2658modules-left = bspwm xwindow
2659modules-center =
2660modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
2661
2662tray-position = right
2663tray-padding = 1
2664;tray-transparent = true
2665;tray-background = #0063ff
2666tray-maxsize = 18
2667
2668wm-restack = bspwm
2669
2670;override-redirect = true
2671
2672scroll-up = bspwm-desknext
2673scroll-down = bspwm-deskprev
2674
2675[module/xwindow]
2676type = internal/xwindow
2677label = %title:0:50:...%
2678
2679[module/xkeyboard]
2680type = internal/xkeyboard
2681blacklist-0 = num lock
2682
2683format-prefix = " "
2684format-prefix-foreground = ${colors.foreground-alt}
2685format-prefix-underline = ${colors.secondary}
2686
2687label-layout = %layout%
2688label-layout-underline = ${colors.secondary}
2689
2690label-indicator-padding = 2
2691label-indicator-margin = 1
2692label-indicator-background = ${colors.secondary}
2693label-indicator-underline = ${colors.secondary}
2694
2695[module/filesystem]
2696type = internal/fs
2697interval = 25
2698
2699mount-0 = /
2700
2701label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
2702label-unmounted = %mountpoint% not mounted
2703label-unmounted-foreground = ${colors.foreground-alt}
2704
2705[module/bspwm]
2706type = internal/bspwm
2707
2708label-focused = %index%
2709label-focused-background = ${colors.background-alt}
2710label-focused-underline= ${colors.primary}
2711label-focused-padding = 2
2712
2713label-occupied = %index%
2714label-occupied-padding = 2
2715
2716label-urgent = %index%!
2717label-urgent-background = ${colors.alert}
2718label-urgent-padding = 2
2719
2720label-empty = %index%
2721label-empty-foreground = ${colors.foreground-alt}
2722label-empty-padding = 2
2723
2724[module/i3]
2725type = internal/i3
2726format = <label-state> <label-mode>
2727index-sort = true
2728wrapping-scroll = false
2729
2730; Only show workspaces on the same output as the bar
2731;pin-workspaces = true
2732
2733label-mode-padding = 2
2734label-mode-foreground = #000
2735label-mode-background = ${colors.primary}
2736
2737; focused = Active workspace on focused monitor
2738label-focused = %index%
2739label-focused-background = ${module/bspwm.label-focused-background}
2740label-focused-underline = ${module/bspwm.label-focused-underline}
2741label-focused-padding = ${module/bspwm.label-focused-padding}
2742
2743; unfocused = Inactive workspace on any monitor
2744label-unfocused = %index%
2745label-unfocused-padding = ${module/bspwm.label-occupied-padding}
2746
2747; visible = Active workspace on unfocused monitor
2748label-visible = %index%
2749label-visible-background = ${self.label-focused-background}
2750label-visible-underline = ${self.label-focused-underline}
2751label-visible-padding = ${self.label-focused-padding}
2752
2753; urgent = Workspace with urgency hint set
2754label-urgent = %index%
2755label-urgent-background = ${module/bspwm.label-urgent-background}
2756label-urgent-padding = ${module/bspwm.label-urgent-padding}
2757
2758[module/mpd]
2759type = internal/mpd
2760format-online = <label-song> <icon-prev> <icon-stop> <toggle> <icon-next>
2761
2762icon-prev = 
2763icon-stop = 
2764icon-play = 
2765icon-pause = 
2766icon-next = 
2767
2768label-song-maxlen = 25
2769label-song-ellipsis = true
2770
2771[module/xbacklight]
2772type = internal/xbacklight
2773
2774format = <label> <bar>
2775label = BL
2776
2777bar-width = 10
2778bar-indicator = |
2779bar-indicator-foreground = #ff
2780bar-indicator-font = 2
2781bar-fill = ─
2782bar-fill-font = 2
2783bar-fill-foreground = #9f78e1
2784bar-empty = ─
2785bar-empty-font = 2
2786bar-empty-foreground = ${colors.foreground-alt}
2787
2788[module/backlight-acpi]
2789inherit = module/xbacklight
2790type = internal/backlight
2791;card = intel_backlight
2792card = mba6x_backlight
2793
2794[module/cpu]
2795type = internal/cpu
2796interval = 2
2797format-prefix = " "
2798format-prefix-foreground = ${colors.foreground-alt}
2799format-underline = #f90000
2800label = %percentage%%
2801
2802[module/memory]
2803type = internal/memory
2804interval = 2
2805format-prefix = " "
2806format-prefix-foreground = ${colors.foreground-alt}
2807format-underline = #4bffdc
2808label = %percentage_used%%
2809
2810[module/wlan]
2811type = internal/network
2812interface =
2813interval = 3.0
2814
2815format-connected = <ramp-signal> <label-connected>
2816format-connected-underline = #9f78e1
2817label-connected = %essid%
2818
2819format-disconnected =
2820;format-disconnected = <label-disconnected>
2821;format-disconnected-underline = ${self.format-connected-underline}
2822;label-disconnected = %ifname% disconnected
2823;label-disconnected-foreground = ${colors.foreground-alt}
2824
2825ramp-signal-0 = 
2826ramp-signal-1 = 
2827ramp-signal-2 = 
2828ramp-signal-3 = 
2829ramp-signal-4 = 
2830ramp-signal-foreground = ${colors.foreground-alt}
2831
2832[module/eth]
2833type = internal/network
2834interface =
2835interval = 3.0
2836
2837format-connected-underline = #55aa55
2838format-connected-prefix = " "
2839format-connected-prefix-foreground = ${colors.foreground-alt}
2840label-connected = %local_ip%
2841
2842format-disconnected =
2843;format-disconnected = <label-disconnected>
2844;format-disconnected-underline = ${self.format-connected-underline}
2845;label-disconnected = %ifname% disconnected
2846;label-disconnected-foreground = ${colors.foreground-alt}
2847
2848[module/date]
2849type = internal/date
2850interval = 5
2851
2852date =
2853date-alt = " %Y-%m-%d"
2854
2855time = %H:%M
2856time-alt = %H:%M:%S
2857
2858format-prefix = 
2859format-prefix-foreground = ${colors.foreground-alt}
2860format-underline = #0a6cf5
2861
2862label = %date% %time%
2863
2864[module/volume]
2865type = internal/volume
2866
2867format-volume = <label-volume> <bar-volume>
2868label-volume = vol
2869label-volume-foreground = ${root.foreground}
2870
2871format-muted-prefix = " "
2872format-muted-foreground = ${colors.foreground-alt}
2873label-muted = mute
2874
2875bar-volume-width = 10
2876bar-volume-foreground-0 = #55aa55
2877bar-volume-foreground-1 = #55aa55
2878bar-volume-foreground-2 = #55aa55
2879bar-volume-foreground-3 = #55aa55
2880bar-volume-foreground-4 = #55aa55
2881bar-volume-foreground-5 = #f5a70a
2882bar-volume-foreground-6 = #ff5555
2883bar-volume-gradient = false
2884bar-volume-indicator = |
2885bar-volume-indicator-font = 2
2886bar-volume-fill = ─
2887bar-volume-fill-font = 2
2888bar-volume-empty = ─
2889bar-volume-empty-font = 2
2890bar-volume-empty-foreground = ${colors.foreground-alt}
2891
2892[module/battery]
2893type = internal/battery
2894battery = BAT0
2895adapter = ADP1
2896full-at = 64
2897
2898format-charging = <animation-charging> <label-charging>
2899format-charging-underline = #ffb52a
2900
2901format-discharging = <ramp-capacity> <label-discharging>
2902format-discharging-underline = ${self.format-charging-underline}
2903
2904format-full-prefix = " "
2905format-full-prefix-foreground = ${colors.foreground-alt}
2906format-full-underline = ${self.format-charging-underline}
2907
2908ramp-capacity-0 = 
2909ramp-capacity-1 = 
2910ramp-capacity-2 = 
2911ramp-capacity-foreground = ${colors.foreground-alt}
2912
2913animation-charging-0 = 
2914animation-charging-1 = 
2915animation-charging-2 = 
2916animation-charging-foreground = ${colors.foreground-alt}
2917animation-charging-framerate = 750
2918
2919[module/temperature]
2920type = internal/temperature
2921thermal-zone = 1
2922warn-temperature = 66
2923
2924format = <ramp> <label>
2925format-underline = #f50a4d
2926format-warn = <ramp> <label-warn>
2927format-warn-underline = ${self.format-underline}
2928
2929label = %temperature%
2930label-warn = %temperature%
2931label-warn-foreground = ${colors.secondary}
2932
2933ramp-0 = 
2934ramp-1 = 
2935ramp-2 = 
2936ramp-foreground = ${colors.foreground-alt}
2937
2938[module/powermenu]
2939type = custom/menu
2940
2941format-spacing = 1
2942
2943label-open = 
2944label-open-foreground = ${colors.secondary}
2945label-close =  cancel
2946label-close-foreground = ${colors.secondary}
2947label-separator = |
2948label-separator-foreground = ${colors.foreground-alt}
2949
2950menu-0-0 = reboot
2951menu-0-0-exec = menu-open-1
2952menu-0-1 = power off
2953menu-0-1-exec = menu-open-2
2954
2955menu-1-0 = cancel
2956menu-1-0-exec = menu-open-0
2957menu-1-1 = reboot
2958menu-1-1-exec = sudo reboot
2959
2960menu-2-0 = power off
2961menu-2-0-exec = sudo poweroff
2962menu-2-1 = cancel
2963menu-2-1-exec = menu-open-0
2964
2965[module/mail]
2966type = custom/script
2967interval = 60
2968format = <label>
2969format-prefix = " "
2970format-prefix-foreground = ${colors.foreground-alt}
2971format-underline = #0a6cf5
2972exec = notmuch count tag:unread
2973
2974[settings]
2975screenchange-reload = true
2976;compositing-background = xor
2977;compositing-background = screen
2978;compositing-foreground = source
2979;compositing-border = over
2980
2981[global/wm]
2982margin-top = 0
2983margin-bottom = 0
2984
2985; vim:ft=dosini
2986#+end_src
2987
2988*** polybar-launch
2989:PROPERTIES:
2990:header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
2991:END:
2992
2993#+begin_src sh :tangle no
2994# Terminate already running bar instances
2995killall -q polybar
2996
2997# Wait until the processes have been shut down
2998while pgrep -x polybar >/dev/null; do sleep 1; done
2999
3000# Launch main bar
3001polybar main &
3002
3003echo "Bars launched..."
3004#+end_src
3005
3006** PowerTOP
3007:PROPERTIES:
3008:header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
3009:END:
3010
3011#+begin_src conf
3012[Unit]
3013Description=Powertop tunings
3014
3015[Service]
3016ExecStart=/usr/bin/powertop --auto-tune
3017RemainAfterExit=true
3018
3019[Install]
3020WantedBy=multi-user.target
3021#+end_src
3022
3023** ranger
3024
3025*** rc.conf
3026:PROPERTIES:
3027:header-args+: :tangle ~/.config/ranger/rc.conf
3028:END:
3029
3030#+begin_src conf :tangle no
3031# ===================================================================
3032# This file contains the default startup commands for ranger.
3033# To change them, it is recommended to create the file
3034# ~/.config/ranger/rc.conf and add your custom commands there.
3035#
3036# If you copy this whole file there, you may want to set the environment
3037# variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
3038#
3039# The purpose of this file is mainly to define keybindings and settings.
3040# For running more complex python code, please create a plugin in "plugins/" or
3041# a command in "commands.py".
3042#
3043# Each line is a command that will be run before the user interface
3044# is initialized. As a result, you can not use commands which rely
3045# on the UI such as :delete or :mark.
3046# ===================================================================
3047
3048# ===================================================================
3049# == Options
3050# ===================================================================
3051
3052# How many columns are there, and what are their relative widths?
3053set column_ratios 1,3,4
3054
3055# Which files should be hidden? (regular expression)
3056set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
3057
3058# Show hidden files? You can toggle this by typing 'zh'
3059set show_hidden false
3060
3061# Ask for a confirmation when running the "delete" command?
3062# Valid values are "always" (default), "never", "multiple"
3063# With "multiple", ranger will ask only if you delete multiple files at once.
3064set confirm_on_delete multiple
3065
3066# Which script is used to generate file previews?
3067# ranger ships with scope.sh, a script that calls external programs (see
3068# README for dependencies) to preview images, archives, etc.
3069set preview_script ~/.config/ranger/scope.sh
3070
3071# Use the external preview script or display simple plain text previews?
3072set use_preview_script true
3073
3074# Open all images in this directory when running certain image viewers
3075# like feh or sxiv? You can still open selected files by marking them.
3076set open_all_images true
3077
3078# Be aware of version control systems and display information.
3079set vcs_aware false
3080
3081# State of the three backends git, hg, bzr. The possible states are
3082# disabled, local (only show local info), enabled (show local and remote
3083# information).
3084set vcs_backend_git enabled
3085set vcs_backend_hg disabled
3086set vcs_backend_bzr disabled
3087
3088# Preview images in full color with the external command "w3mimgpreview"?
3089# This requires the console web browser "w3m" and a supported terminal.
3090# It has been successfully tested with "xterm" and "urxvt" without tmux.
3091set preview_images true
3092
3093# Use a unicode "..." character to mark cut-off filenames?
3094set unicode_ellipsis false
3095
3096# Show dotfiles in the bookmark preview box?
3097set show_hidden_bookmarks true
3098
3099# Which colorscheme to use? These colorschemes are available by default:
3100# default, jungle, snow
3101set colorscheme default
3102
3103# Preview files on the rightmost column?
3104# And collapse (shrink) the last column if there is nothing to preview?
3105set preview_files true
3106set preview_directories true
3107set collapse_preview true
3108
3109# Save the console history on exit?
3110set save_console_history true
3111
3112# Draw the status bar on top of the browser window (default: bottom)
3113set status_bar_on_top false
3114
3115# Draw a progress bar in the status bar which displays the average state of all
3116# currently running tasks which support progress bars?
3117set draw_progress_bar_in_status_bar true
3118
3119# Draw borders around columns?
3120set draw_borders true
3121
3122# Display the directory name in tabs?
3123set dirname_in_tabs false
3124
3125# Enable the mouse support?
3126set mouse_enabled true
3127
3128# Display the file size in the main column or status bar?
3129set display_size_in_main_column true
3130set display_size_in_status_bar true
3131
3132# Display files tags in all columns or only in main column?
3133set display_tags_in_all_columns true
3134
3135# Set a title for the window?
3136set update_title false
3137
3138# Set the title to "ranger" in the tmux program?
3139set update_tmux_title false
3140
3141# Shorten the title if it gets long? The number defines how many
3142# directories are displayed at once, 0 turns off this feature.
3143set shorten_title 3
3144
3145# Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
3146set tilde_in_titlebar false
3147
3148# How many directory-changes or console-commands should be kept in history?
3149set max_history_size 20
3150set max_console_history_size 50
3151
3152# Try to keep so much space between the top/bottom border when scrolling:
3153set scroll_offset 8
3154
3155# Flush the input after each key hit? (Noticable when ranger lags)
3156set flushinput true
3157
3158# Padding on the right when there's no preview?
3159# This allows you to click into the space to run the file.
3160set padding_right true
3161
3162# Save bookmarks (used with mX and `X) instantly?
3163# This helps to synchronize bookmarks between multiple ranger
3164# instances but leads to *slight* performance loss.
3165# When false, bookmarks are saved when ranger is exited.
3166set autosave_bookmarks true
3167
3168# You can display the "real" cumulative size of directories by using the
3169# command :get_cumulative_size or typing "dc". The size is expensive to
3170# calculate and will not be updated automatically. You can choose
3171# to update it automatically though by turning on this option:
3172set autoupdate_cumulative_size false
3173
3174# Turning this on makes sense for screen readers:
3175set show_cursor false
3176
3177# One of: size, basename, mtime, type
3178set sort natural
3179
3180# Additional sorting options
3181set sort_reverse false
3182set sort_case_insensitive true
3183set sort_directories_first true
3184
3185# Enable this if key combinations with the Alt Key don't work for you.
3186# (Especially on xterm)
3187set xterm_alt_key false
3188
3189# ===================================================================
3190# == Local Options
3191# ===================================================================
3192# You can set local options that only affect a single directory.
3193
3194# Examples:
3195# setlocal path=~/downloads sort mtime
3196
3197# ===================================================================
3198# == Command Aliases in the Console
3199# ===================================================================
3200
3201alias e edit
3202alias q quit
3203alias q! quitall
3204alias qall quitall
3205alias setl setlocal
3206
3207alias filter scout -prt
3208alias find scout -aet
3209alias mark scout -mr
3210alias unmark scout -Mr
3211alias search scout -rs
3212alias search_inc scout -rts
3213alias travel scout -aefiklst
3214
3215# ===================================================================
3216# == Define keys for the browser
3217# ===================================================================
3218
3219# Basic
3220map Q quit!
3221map q quit
3222copymap q ZZ ZQ
3223
3224map R reload_cwd
3225map <C-r> reset
3226map <C-l> redraw_window
3227map <C-c> abort
3228map <esc> change_mode normal
3229
3230map i display_file
3231map ? help
3232map W display_log
3233map w taskview_open
3234map S shell $SHELL
3235
3236map : console
3237map ; console
3238map ! console shell
3239map @ console -p6 shell %%s
3240map # console shell -p
3241map s console shell
3242map r chain draw_possible_programs; console open_with
3243map f console find
3244map cd console cd
3245
3246# Tagging / Marking
3247map t tag_toggle
3248map ut tag_remove
3249map "<any> tag_toggle tag=%any
3250map <Space> mark_files toggle=True
3251map v mark_files all=True toggle=True
3252map uv mark_files all=True val=False
3253map V toggle_visual_mode
3254map uV toggle_visual_mode reverse=True
3255
3256# For the nostalgics: Midnight Commander bindings
3257map <F1> help
3258map <F3> display_file
3259map <F4> edit
3260map <F5> copy
3261map <F6> cut
3262map <F7> console mkdir
3263map <F8> console delete
3264map <F10> exit
3265
3266# In case you work on a keyboard with dvorak layout
3267map <UP> move up=1
3268map <DOWN> move down=1
3269map <LEFT> move left=1
3270map <RIGHT> move right=1
3271map <HOME> move to=0
3272map <END> move to=-1
3273map <PAGEDOWN> move down=1 pages=True
3274map <PAGEUP> move up=1 pages=True
3275map <CR> move right=1
3276map <DELETE> console delete
3277map <INSERT> console touch
3278
3279# VIM-like
3280copymap <UP> k
3281copymap <DOWN> j
3282copymap <LEFT> h
3283copymap <RIGHT> l
3284copymap <HOME> gg
3285copymap <END> G
3286copymap <PAGEDOWN> <C-F>
3287copymap <PAGEUP> <C-B>
3288
3289map J move down=0.5 pages=True
3290map K move up=0.5 pages=True
3291copymap J <C-D>
3292copymap K <C-U>
3293
3294# Jumping around
3295map H history_go -1
3296map L history_go 1
3297map ] move_parent 1
3298map [ move_parent -1
3299map } traverse
3300
3301map gh cd ~
3302map ge cd /etc
3303map gu cd /usr
3304map gd cd /dev
3305map gl cd -r .
3306map gL cd -r %f
3307map go cd /opt
3308map gv cd /var
3309map gm cd /media
3310map gM cd /mnt
3311map gs cd /srv
3312map gr cd /
3313map gR eval fm.cd(ranger.RANGERDIR)
3314map g/ cd /
3315map g? cd /usr/share/doc/ranger
3316
3317# External Programs
3318map E edit
3319map du shell -p du --max-depth=1 -h --apparent-size
3320map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
3321map yp shell -d echo -n %d/%f | xsel -i
3322map yd shell -d echo -n %d | xsel -i
3323map yn shell -d echo -n %f | xsel -i
3324
3325# Filesystem Operations
3326map = chmod
3327
3328map cw console rename
3329map A eval fm.open_console('rename ' + fm.thisfile.basename)
3330map I eval fm.open_console('rename ' + fm.thisfile.basename, position=7)
3331
3332map pp paste
3333map po paste overwrite=True
3334map pl paste_symlink relative=False
3335map pL paste_symlink relative=True
3336map phl paste_hardlink
3337map pht paste_hardlinked_subtree
3338
3339map dd cut
3340map ud uncut
3341map da cut mode=add
3342map dr cut mode=remove
3343
3344map yy copy
3345map uy uncut
3346map ya copy mode=add
3347map yr copy mode=remove
3348
3349# Temporary workarounds
3350map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
3351map dG eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
3352map dj eval fm.cut(dirarg=dict(down=1), narg=quantifier)
3353map dk eval fm.cut(dirarg=dict(up=1), narg=quantifier)
3354map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
3355map yG eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
3356map yj eval fm.copy(dirarg=dict(down=1), narg=quantifier)
3357map yk eval fm.copy(dirarg=dict(up=1), narg=quantifier)
3358
3359# Searching
3360map / console search
3361map n search_next
3362map N search_next forward=False
3363map ct search_next order=tag
3364map cs search_next order=size
3365map ci search_next order=mimetype
3366map cc search_next order=ctime
3367map cm search_next order=mtime
3368map ca search_next order=atime
3369
3370# Tabs
3371map <C-n> tab_new ~
3372map <C-w> tab_close
3373map <TAB> tab_move 1
3374map <S-TAB> tab_move -1
3375map <A-Right> tab_move 1
3376map <A-Left> tab_move -1
3377map gt tab_move 1
3378map gT tab_move -1
3379map gn tab_new ~
3380map gc tab_close
3381map uq tab_restore
3382map <a-1> tab_open 1
3383map <a-2> tab_open 2
3384map <a-3> tab_open 3
3385map <a-4> tab_open 4
3386map <a-5> tab_open 5
3387map <a-6> tab_open 6
3388map <a-7> tab_open 7
3389map <a-8> tab_open 8
3390map <a-9> tab_open 9
3391
3392# Sorting
3393map or toggle_option sort_reverse
3394map os chain set sort=size; set sort_reverse=False
3395map ob chain set sort=basename; set sort_reverse=False
3396map on chain set sort=natural; set sort_reverse=False
3397map om chain set sort=mtime; set sort_reverse=False
3398map oc chain set sort=ctime; set sort_reverse=False
3399map oa chain set sort=atime; set sort_reverse=False
3400map ot chain set sort=type; set sort_reverse=False
3401
3402map oS chain set sort=size; set sort_reverse=True
3403map oB chain set sort=basename; set sort_reverse=True
3404map oN chain set sort=natural; set sort_reverse=True
3405map oM chain set sort=mtime; set sort_reverse=True
3406map oC chain set sort=ctime; set sort_reverse=True
3407map oA chain set sort=atime; set sort_reverse=True
3408map oT chain set sort=type; set sort_reverse=True
3409
3410map dc get_cumulative_size
3411
3412# Settings
3413map zc toggle_option collapse_preview
3414map zd toggle_option sort_directories_first
3415map zh toggle_option show_hidden
3416map <C-h> toggle_option show_hidden
3417map zi toggle_option flushinput
3418map zm toggle_option mouse_enabled
3419map zp toggle_option preview_files
3420map zP toggle_option preview_directories
3421map zs toggle_option sort_case_insensitive
3422map zu toggle_option autoupdate_cumulative_size
3423map zv toggle_option use_preview_script
3424map zf console filter
3425
3426# Bookmarks
3427map `<any> enter_bookmark %any
3428map '<any> enter_bookmark %any
3429map m<any> set_bookmark %any
3430map um<any> unset_bookmark %any
3431
3432map m<bg> draw_bookmarks
3433copymap m<bg> um<bg> `<bg> '<bg>
3434
3435# Generate all the chmod bindings with some python help:
3436eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
3437eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
3438eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
3439eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
3440eval for arg in "rwxXst": cmd("map +{0} shell -d chmod u+{0} %s".format(arg))
3441
3442eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
3443eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
3444eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
3445eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
3446eval for arg in "rwxXst": cmd("map -{0} shell -d chmod u-{0} %s".format(arg))
3447
3448# ===================================================================
3449# == Define keys for the console
3450# ===================================================================
3451# Note: Unmapped keys are passed directly to the console.
3452
3453# Basic
3454cmap <tab> eval fm.ui.console.tab()
3455cmap <s-tab> eval fm.ui.console.tab(-1)
3456cmap <ESC> eval fm.ui.console.close()
3457cmap <CR> eval fm.ui.console.execute()
3458cmap <C-l> redraw_window
3459
3460copycmap <ESC> <C-c>
3461copycmap <CR> <C-j>
3462
3463# Move around
3464cmap <up> eval fm.ui.console.history_move(-1)
3465cmap <down> eval fm.ui.console.history_move(1)
3466cmap <left> eval fm.ui.console.move(left=1)
3467cmap <right> eval fm.ui.console.move(right=1)
3468cmap <home> eval fm.ui.console.move(right=0, absolute=True)
3469cmap <end> eval fm.ui.console.move(right=-1, absolute=True)
3470
3471# Line Editing
3472cmap <backspace> eval fm.ui.console.delete(-1)
3473cmap <delete> eval fm.ui.console.delete(0)
3474cmap <C-w> eval fm.ui.console.delete_word()
3475cmap <C-k> eval fm.ui.console.delete_rest(1)
3476cmap <C-u> eval fm.ui.console.delete_rest(-1)
3477cmap <C-y> eval fm.ui.console.paste()
3478
3479# And of course the emacs way
3480copycmap <up> <C-p>
3481copycmap <down> <C-n>
3482copycmap <left> <C-b>
3483copycmap <right> <C-f>
3484copycmap <home> <C-a>
3485copycmap <end> <C-e>
3486copycmap <delete> <C-d>
3487copycmap <backspace> <C-h>
3488
3489# Note: There are multiple ways to express backspaces. <backspace> (code 263)
3490# and <backspace2> (code 127). To be sure, use both.
3491copycmap <backspace> <backspace2>
3492
3493# This special expression allows typing in numerals:
3494cmap <allow_quantifiers> false
3495
3496# ===================================================================
3497# == Pager Keybindings
3498# ===================================================================
3499
3500# Movement
3501pmap <down> pager_move down=1
3502pmap <up> pager_move up=1
3503pmap <left> pager_move left=4
3504pmap <right> pager_move right=4
3505pmap <home> pager_move to=0
3506pmap <end> pager_move to=-1
3507pmap <pagedown> pager_move down=1.0 pages=True
3508pmap <pageup> pager_move up=1.0 pages=True
3509pmap <C-d> pager_move down=0.5 pages=True
3510pmap <C-u> pager_move up=0.5 pages=True
3511
3512copypmap <UP> k <C-p>
3513copypmap <DOWN> j <C-n> <CR>
3514copypmap <LEFT> h
3515copypmap <RIGHT> l
3516copypmap <HOME> g
3517copypmap <END> G
3518copypmap <C-d> d
3519copypmap <C-u> u
3520copypmap <PAGEDOWN> n f <C-F> <Space>
3521copypmap <PAGEUP> p b <C-B>
3522
3523# Basic
3524pmap <ESC> pager_close
3525copypmap <ESC> q Q i <F3>
3526pmap E edit_file
3527
3528# ===================================================================
3529# == Taskview Keybindings
3530# ===================================================================
3531
3532# Movement
3533tmap <up> taskview_move up=1
3534tmap <down> taskview_move down=1
3535tmap <home> taskview_move to=0
3536tmap <end> taskview_move to=-1
3537tmap <pagedown> taskview_move down=1.0 pages=True
3538tmap <pageup> taskview_move up=1.0 pages=True
3539tmap <C-d> taskview_move down=0.5 pages=True
3540tmap <C-u> taskview_move up=0.5 pages=True
3541
3542copytmap <UP> k <C-p>
3543copytmap <DOWN> j <C-n> <CR>
3544copytmap <HOME> g
3545copytmap <END> G
3546copytmap <C-u> u
3547copytmap <PAGEDOWN> n f <C-F> <Space>
3548copytmap <PAGEUP> p b <C-B>
3549
3550# Changing priority and deleting tasks
3551tmap J eval -q fm.ui.taskview.task_move(-1)
3552tmap K eval -q fm.ui.taskview.task_move(0)
3553tmap dd eval -q fm.ui.taskview.task_remove()
3554tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
3555tmap <pageup> eval -q fm.ui.taskview.task_move(0)
3556tmap <delete> eval -q fm.ui.taskview.task_remove()
3557
3558# Basic
3559tmap <ESC> taskview_close
3560copytmap <ESC> q Q w <C-c>
3561#+end_src
3562
3563*** scope.sh
3564:PROPERTIES:
3565:header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
3566:END:
3567
3568#+begin_src sh :tangle no
3569# ranger supports enhanced previews. If the option "use_preview_script"
3570# is set to True and this file exists, this script will be called and its
3571# output is displayed in ranger. ANSI color codes are supported.
3572
3573# NOTES: This script is considered a configuration file. If you upgrade
3574# ranger, it will be left untouched. (You must update it yourself.)
3575# Also, ranger disables STDIN here, so interactive scripts won't work properly
3576
3577# Meanings of exit codes:
3578# code | meaning | action of ranger
3579# -----+------------+-------------------------------------------
3580# 0 | success | success. display stdout as preview
3581# 1 | no preview | failure. display no preview at all
3582# 2 | plain text | display the plain content of the file
3583# 3 | fix width | success. Don't reload when width changes
3584# 4 | fix height | success. Don't reload when height changes
3585# 5 | fix both | success. Don't ever reload
3586
3587# Meaningful aliases for arguments:
3588path="$1" # Full path of the selected file
3589width="$2" # Width of the preview pane (number of fitting characters)
3590height="$3" # Height of the preview pane (number of fitting characters)
3591
3592maxln=200 # Stop after $maxln lines. Can be used like ls | head -n $maxln
3593
3594# Find out something about the file:
3595mimetype=$(file --mime-type -Lb "$path")
3596extension=${path##*.}
3597
3598# Functions:
3599# runs a command and saves its output into $output. Useful if you need
3600# the return value AND want to use the output in a pipe
3601try() { output=$(eval '"$@"'); }
3602
3603# writes the output of the previouosly used "try" command
3604dump() { echo "$output"; }
3605
3606# a common post-processing function used after most commands
3607trim() { head -n "$maxln"; }
3608
3609# wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
3610highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }
3611
3612case "$extension" in
3613 # Archive extensions:
3614 7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
3615 rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
3616 try als "$path" && { dump | trim; exit 0; }
3617 try acat "$path" && { dump | trim; exit 3; }
3618 try bsdtar -lf "$path" && { dump | trim; exit 0; }
3619 exit 1;;
3620 rar)
3621 try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
3622 # PDF documents:
3623 pdf)
3624 try pdftotext -l 10 -nopgbrk -q "$path" - && \
3625 { dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
3626 # BitTorrent Files
3627 torrent)
3628 try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
3629 # HTML Pages:
3630 htm|html|xhtml)
3631 try w3m -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3632 try lynx -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3633 try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3634 ;; # fall back to highlight/cat if the text browsers fail
3635esac
3636
3637case "$mimetype" in
3638 # Syntax highlight for text files:
3639 text/* | */xml)
3640 try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
3641 # Ascii-previews of images:
3642 image/*)
3643 img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
3644 # Display information about media files:
3645 video/* | audio/*)
3646 exiftool "$path" && exit 5
3647 # Use sed to remove spaces so the output fits into the narrow window
3648 try mediainfo "$path" && { dump | trim | sed 's/ \+:/: /;'; exit 5; } || exit 1;;
3649esac
3650
3651exit 1
3652#+end_src
3653
3654** redshift
3655:PROPERTIES:
3656:header-args+: :tangle ~/.config/redshift.conf :comments none
3657:END:
3658
3659#+begin_src conf
3660; Global settings for redshift
3661[redshift]
3662; Set the day and night screen temperatures (Neutral is 6500K)
3663;temp-day=5700
3664;temp-night=3500
3665
3666;temp-day=6500
3667temp-day=6200
3668;temp-night=4800
3669;temp-night=5000
3670;temp-night=4500
3671temp-night=4000
3672
3673; Enable/Disable a smooth transition between day and night
3674; 0 will cause a direct change from day to night screen temperature.
3675; 1 will gradually increase or decrease the screen temperature.
3676transition=1
3677
3678; Set the screen brightness. Default is 1.0.
3679;brightness=0.9
3680; It is also possible to use different settings for day and night
3681; since version 1.8.
3682;brightness-day=0.7
3683;brightness-night=0.4
3684; Set the screen gamma (for all colors, or each color channel
3685; individually)
3686;gamma=0.8
3687;gamma=1.0
3688;gamma=0.8:0.7:0.8
3689; This can also be set individually for day and night since
3690; version 1.10.
3691;gamma-day=0.8:0.7:0.8
3692;gamma-night=0.6
3693
3694; Set the location-provider: 'geoclue2' or 'manual'
3695; type 'redshift -l list' to see possible values.
3696; The location provider settings are in a different section.
3697;location-provider=manual
3698location-provider=geoclue2
3699
3700; Set the adjustment-method: 'randr', 'vidmode'
3701; type 'redshift -m list' to see all possible values.
3702; 'randr' is the preferred method, 'vidmode' is an older API.
3703; but works in some cases when 'randr' does not.
3704; The adjustment method settings are in a different section.
3705adjustment-method=randr
3706
3707; Configuration of the location-provider:
3708; type 'redshift -l PROVIDER:help' to see the settings.
3709; ex: 'redshift -l manual:help'
3710; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
3711; are negative numbers.
3712;[manual]
3713;lat=48.1
3714;lon=11.6
3715
3716; Configuration of the adjustment-method
3717; type 'redshift -m METHOD:help' to see the settings.
3718; ex: 'redshift -m randr:help'
3719; In this example, randr is configured to adjust screen 1.
3720; Note that the numbering starts from 0, so this is actually the
3721; second screen. If this option is not specified, Redshift will try
3722; to adjust _all_ screens.
3723;[randr]
3724;screen=1
3725#+end_src
3726
3727** rofi
3728:PROPERTIES:
3729:header-args+: :tangle ~/.config/rofi/config
3730:END:
3731
3732#+begin_src conf
3733! rofi.font: Ubuntu Mono 13
3734! rofi.font: Inconsolata 16
3735! rofi.font: Iosevka 13
3736! rofi.font: Source Code Pro 11
3737rofi.font: Source Code Pro 10.5
3738rofi.modi: run,window
3739! rofi.width: 640
3740rofi.width: 600
3741!rofi.location: 2
3742!rofi.yoffset: 200
3743rofi.monitor: -1
3744!rofi.lines: 10
3745
3746!rofi.theme: /usr/share/rofi/themes//Arc.rasi
3747!rofi.theme: /usr/share/rofi/themes//Paper.rasi
3748!rofi.theme: /usr/share/rofi/themes//sidebar.rasi
3749
3750rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
3751#+end_src
3752
3753** rofi-pass
3754:PROPERTIES:
3755:header-args+: :tangle ~/.config/rofi-pass/config
3756:END:
3757
3758#+begin_src conf
3759# permanently set alternative root dir
3760# root=/path/to/root
3761
3762# rofi command. Make sure to have "$@" as last argument
3763_rofi () {
3764 #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
3765 rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
3766}
3767
3768# xdotool needs the keyboard layout to be set using setxkbmap
3769# You can do this in your autostart scripts (e.g. xinitrc)
3770
3771# If for some reason, you cannot do this, you can set the command here.
3772# and set fix_layout to true
3773fix_layout=false
3774
3775layout_cmd () {
3776 setxkbmap us
3777}
3778
3779# fields to be used
3780URL_field='url'
3781USERNAME_field='user'
3782AUTOTYPE_field='autotype'
3783
3784# delay to be used for :delay keyword
3785delay=2
3786
3787## Programs to be used
3788# Editor
3789EDITOR='gvim -f'
3790
3791# Browser
3792BROWSER='chromium'
3793
3794## Misc settings
3795
3796default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
3797auto_enter='false'
3798notify='false'
3799default_autotype='user :tab pass'
3800
3801# color of the help messages
3802# leave empty for autodetection
3803help_color="#4872FF"
3804
3805# Clipboard settings
3806# Possible options: primary, clipboard, both
3807clip=primary
3808
3809# Options for generating new password entries
3810# default_user is also used for password files that have no user field.
3811default_user=aminb
3812default_user2=aminban
3813password_length=30
3814
3815# Custom Keybindings
3816#autotype="Alt+1"
3817autotype="Alt+m"
3818type_user="Alt+2"
3819type_pass="Alt+3"
3820open_url="Alt+4"
3821copy_name="Alt+u"
3822copy_url="Alt+l"
3823copy_pass="Alt+p"
3824show="Alt+o"
3825copy_entry="Alt+2"
3826type_entry="Alt+1"
3827copy_menu="Alt+c"
3828action_menu="Alt+a"
3829type_menu="Alt+t"
3830help="Alt+h"
3831switch="Alt+x"
3832insert_pass="Alt+n"
3833#+end_src
3834
3835** sway
3836
3837*** main
3838:PROPERTIES:
3839:header-args+: :tangle ~/.config/sway/config
3840:END:
3841
3842#+begin_src conf
3843### Variables
3844# super
3845set $mod Mod4
3846# alt
3847set $mod2 Mod1
3848set $left h
3849set $down j
3850set $up k
3851set $right l
3852set $term urxvt
3853set $menu rofi -show run -display-run '> ' -display-window ' 🗔 '
3854
3855### Output configuration
3856#
3857# Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/)
3858output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
3859#
3860# Example configuration:
3861#
3862# output HDMI-A-1 resolution 1920x1080 position 1920,0
3863#
3864# You can get the names of your outputs by running: swaymsg -t get_outputs
3865
3866### Idle configuration
3867
3868exec swayidle \
3869 timeout 120 '[ -f ~/.nosleep ] || swaymsg "output * dpms off"' \
3870 resume '[ -f ~/.nosleep ] || swaymsg "output * dpms on"' \
3871
3872
3873### Key bindings
3874#
3875# Basics:
3876#
3877 # start a terminal
3878 bindsym $mod+Return exec $term -name floating
3879 bindsym $mod+Shift+Return exec $term
3880 for_window [class="URxvt" instance="floating"] floating enable
3881
3882 # kill focused window
3883 bindsym $mod+Shift+q kill
3884
3885 # start your launcher
3886 bindsym $mod+d exec $menu
3887
3888 # password manager
3889 bindsym $mod2+space exec rofi-pass
3890
3891 # Drag floating windows by holding down $mod and left mouse button.
3892 # Resize them with right mouse button + $mod.
3893 # Despite the name, also works for non-floating windows.
3894 # Change normal to inverse to use left mouse button for resizing and right
3895 # mouse button for dragging.
3896 floating_modifier $mod normal
3897
3898 # reload the configuration file
3899 bindsym $mod+Shift+c reload
3900
3901 # exit sway (logs you out of your wayland session)
3902 bindsym $mod+Shift+e exit
3903
3904 bindsym $mod+apostrophe exec rofi-light # rofi-based brightness chooser
3905 bindsym XF86MonBrightnessUp exec light -A 5 # increase screen brightness
3906 bindsym XF86MonBrightnessDown exec light -U 5 # decrease screen brightness
3907
3908 bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
3909 bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
3910 bindsym XF86AudioMute exec pamixer --toggle-mute
3911 bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
3912
3913 bindsym $mod+Shift+apostrophe exec rofi-remmina.py # choose remmina connection
3914
3915 # original sway workspace switch and window move
3916 bindsym $mod+bracketleft workspace prev
3917 bindsym $mod+bracketright workspace next
3918 bindsym $mod+braceleft move container to workspace prev
3919 bindsym $mod+braceright move container to workspace next
3920
3921 # bspwm-esque workspace switch and window move
3922 bindsym $mod2+bracketleft exec sway-ws-util switch prev
3923 bindsym $mod2+bracketright exec sway-ws-util switch next
3924 bindsym $mod2+braceleft exec sway-ws-util move prev follow
3925 bindsym $mod2+braceright exec sway-ws-util move next follow
3926#
3927# Moving around:
3928#
3929 # Move your focus around
3930 bindsym $mod+$left focus left
3931 bindsym $mod+$down focus down
3932 bindsym $mod+$up focus up
3933 bindsym $mod+$right focus right
3934 # or use $mod+[up|down|left|right]
3935 bindsym $mod+Left focus left
3936 bindsym $mod+Down focus down
3937 bindsym $mod+Up focus up
3938 bindsym $mod+Right focus right
3939
3940 # _move_ the focused window with the same, but add Shift
3941 bindsym $mod+Shift+$left move left
3942 bindsym $mod+Shift+$down move down
3943 bindsym $mod+Shift+$up move up
3944 bindsym $mod+Shift+$right move right
3945 # ditto, with arrow keys
3946 bindsym $mod+Shift+Left move left
3947 bindsym $mod+Shift+Down move down
3948 bindsym $mod+Shift+Up move up
3949 bindsym $mod+Shift+Right move right
3950#
3951# Workspaces:
3952#
3953 # switch to workspace
3954 bindsym $mod+1 workspace 1
3955 bindsym $mod+2 workspace 2
3956 bindsym $mod+3 workspace 3
3957 bindsym $mod+4 workspace 4
3958 bindsym $mod+5 workspace 5
3959 bindsym $mod+6 workspace 6
3960 bindsym $mod+7 workspace 7
3961 bindsym $mod+8 workspace 8
3962 bindsym $mod+9 workspace 9
3963 bindsym $mod+0 workspace 10
3964 # move focused container to workspace
3965 bindsym $mod+Shift+1 move container to workspace 1
3966 bindsym $mod+Shift+2 move container to workspace 2
3967 bindsym $mod+Shift+3 move container to workspace 3
3968 bindsym $mod+Shift+4 move container to workspace 4
3969 bindsym $mod+Shift+5 move container to workspace 5
3970 bindsym $mod+Shift+6 move container to workspace 6
3971 bindsym $mod+Shift+7 move container to workspace 7
3972 bindsym $mod+Shift+8 move container to workspace 8
3973 bindsym $mod+Shift+9 move container to workspace 9
3974 bindsym $mod+Shift+0 move container to workspace 10
3975 # Note: workspaces can have any name you want, not just numbers.
3976 # We just use 1-10 as the default.
3977#
3978# Layout stuff:
3979#
3980 # You can "split" the current object of your focus with
3981 # $mod+b or $mod+v, for horizontal and vertical splits
3982 # respectively.
3983 bindsym $mod+b splith
3984 bindsym $mod+v splitv
3985
3986 # Switch the current container between different layout styles
3987 bindsym $mod+s layout stacking
3988 bindsym $mod+w layout tabbed
3989 bindsym $mod+e layout toggle split
3990
3991 # Make the current focus fullscreen
3992 bindsym $mod+f fullscreen
3993
3994 # Toggle the current focus between tiling and floating mode
3995 bindsym $mod+Shift+space floating toggle
3996
3997 # Swap focus between the tiling area and the floating area
3998 bindsym $mod+space focus mode_toggle
3999
4000 # move focus to the parent container
4001 bindsym $mod+a focus parent
4002#
4003# Scratchpad:
4004#
4005 # Sway has a "scratchpad", which is a bag of holding for windows.
4006 # You can send windows there and get them back later.
4007
4008 # Move the currently focused window to the scratchpad
4009 bindsym $mod+Shift+minus move scratchpad
4010
4011 # Show the next scratchpad window or hide the focused scratchpad window.
4012 # If there are multiple scratchpad windows, this command cycles through them.
4013 bindsym $mod+minus scratchpad show
4014#
4015# Resizing containers:
4016#
4017mode "resize" {
4018 # left will shrink the containers width
4019 # right will grow the containers width
4020 # up will shrink the containers height
4021 # down will grow the containers height
4022 bindsym $left resize shrink width 10px
4023 bindsym $down resize grow height 10px
4024 bindsym $up resize shrink height 10px
4025 bindsym $right resize grow width 10px
4026
4027 # ditto, with arrow keys
4028 bindsym Left resize shrink width 10px
4029 bindsym Down resize grow height 10px
4030 bindsym Up resize shrink height 10px
4031 bindsym Right resize grow width 10px
4032
4033 # return to default mode
4034 bindsym Return mode "default"
4035 bindsym Escape mode "default"
4036}
4037bindsym $mod+Shift+r mode "resize"
4038
4039#
4040# Power button
4041#
4042
4043set $mode_system System (l)ock, (e)xit sway, (s)uspend, (h)ibernate, (r)eboot, (S)hutdown
4044mode "$mode_system" {
4045 bindsym l exec swaylock, mode "default"
4046 bindsym e exec swaymsg exit, mode "default"
4047 bindsym s exec systemctl suspend, mode "default"
4048 bindsym h exec systemctl hibernate, mode "default"
4049 bindsym r exec systemctl reboot, mode "default"
4050 bindsym Shift+s exec systemctl poweroff -i, mode "default"
4051
4052 # back to normal: Enter, Escape, or q
4053 bindsym Return mode "default"
4054 bindsym Escape mode "default"
4055 bindsym q mode "default"
4056}
4057bindsym XF86PowerOff mode "$mode_system"
4058
4059#
4060# Presentation mode
4061#
4062
4063bindsym $mod+$mod2+p exec ([ ! -e ~/.nosleep ] && touch ~/.nosleep || rm ~/.nosleep) && killall -USR1 i3status
4064
4065#
4066# Notifications
4067#
4068
4069bindsym $mod+Shift+n mode notifications
4070mode notifications {
4071 bindsym Return exec makoctl invoke; exec makoctl dismiss; mode default
4072 bindsym d exec makoctl dismiss; mode default
4073 bindsym Shift+d exec makoctl dismiss -a; mode default
4074
4075 bindsym Escape mode default
4076 bindsym q mode default
4077}
4078
4079#
4080# Screenshotting
4081#
4082
4083bindsym $mod+Shift+s mode screenshot
4084mode screenshot {
4085 bindsym a exec grim $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
4086 bindsym r exec slurp | grim -g - $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
4087
4088 bindsym Escape mode default
4089 bindsym q mode default
4090}
4091
4092#
4093# Status Bar:
4094#
4095# Read `man 5 sway-bar` for more information about this section.
4096bar {
4097 position bottom
4098 colors {
4099 statusline #ffffff
4100 background #323232
4101 inactive_workspace #32323200 #32323200 #5c5c5c
4102 }
4103 status_command i3status | my-i3status.py
4104}
4105
4106# font pango: benis uushi 9
4107# font pango: Ubuntu Mono 11
4108# font pango: Inconsolata 11
4109font pango: DejaVu Sans Mono 9
4110# font pango: Liberation Mono 9
4111
4112exec xrdb .Xresources
4113exec pgrep -x "systemd-inhibit" || \
4114 systemd-inhibit --what=handle-power-key --who=aminb \
4115 --why="Handle power button in sway" sleep infinity
4116exec mako 2>&1 >/tmp/mako.log
4117exec /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
4118
4119include /etc/sway/config.d/*
4120include ~/.config/sway/`hostname`
4121
4122exec systemd-notify --ready || true
4123
4124#+end_src
4125
4126*** langa
4127:PROPERTIES:
4128:header-args+: :tangle ~/.config/sway/langa
4129:END:
4130
4131#+begin_src conf
4132input "2:7:SynPS/2_Synaptics_TouchPad" {
4133 events disabled
4134 dwt enabled
4135 tap enabled
4136 natural_scroll enabled
4137 click_method clickfinger
4138}
4139
4140input "1:1:AT_Translated_Set_2_keyboard" {
4141 repeat_delay 200
4142 repeat_rate 45
4143 xkb_layout us_ab,ir
4144 xkb_options ctrl:nocaps,altwin:swap_alt_win,grp:shifts_toggle
4145}
4146#+end_src
4147
4148*** shemshak
4149:PROPERTIES:
4150:header-args+: :tangle ~/.config/sway/shemshak
4151:END:
4152
4153#+begin_src conf
4154input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
4155 dwt enabled
4156 tap enabled
4157 natural_scroll enabled
4158 middle_emulation enabled
4159 click_method clickfinger
4160}
4161
4162input "1:1:AT_Translated_Set_2_keyboard" {
4163 repeat_delay 200
4164 repeat_rate 45
4165 xkb_layout us,ir
4166 xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
4167}
4168#+end_src
4169** swaylock
4170:PROPERTIES:
4171:header-args+: :tangle ~/.config/swaylock/config
4172:END:
4173
4174#+begin_src conf
4175image=/home/amin/usr/pics/wp/wp2445784-blurred-wallpapers.jpg
4176scaling=fill
4177#+end_src
4178
4179** TLP
4180
4181*** langa
4182
4183#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "langa")) "/sudo::/etc/default/tlp")
4184# ------------------------------------------------------------------------------
4185# tlp - Parameters for power saving
4186# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
4187
4188# Hint: some features are disabled by default, remove the leading # to enable
4189# them.
4190
4191# Set to 0 to disable, 1 to enable TLP.
4192TLP_ENABLE=1
4193
4194# Operation mode when no power supply can be detected: AC, BAT.
4195# Concerns some desktop and embedded hardware only.
4196TLP_DEFAULT_MODE=AC
4197
4198# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
4199# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
4200TLP_PERSISTENT_DEFAULT=0
4201
4202# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
4203# Non-zero value enables, zero disables laptop mode.
4204DISK_IDLE_SECS_ON_AC=0
4205DISK_IDLE_SECS_ON_BAT=2
4206
4207# Dirty page values (timeouts in secs).
4208MAX_LOST_WORK_SECS_ON_AC=15
4209MAX_LOST_WORK_SECS_ON_BAT=60
4210
4211# Hint: CPU parameters below are disabled by default, remove the leading #
4212# to enable them, otherwise kernel default values are used.
4213
4214# Select a CPU frequency scaling governor.
4215# Intel Core i processor with intel_pstate driver:
4216# powersave(*), performance.
4217# Older hardware with acpi-cpufreq driver:
4218# ondemand(*), powersave, performance, conservative, schedutil.
4219# (*) is recommended.
4220# Hint: use tlp-stat -p to show the active driver and available governors.
4221# Important:
4222# powersave for intel_pstate and ondemand for acpi-cpufreq are power
4223# efficient for *almost all* workloads and therefore kernel and most
4224# distributions have chosen them as defaults. If you still want to change,
4225# you should know what you're doing! You *must* disable your distribution's
4226# governor settings or conflicts will occur.
4227#CPU_SCALING_GOVERNOR_ON_AC=powersave
4228#CPU_SCALING_GOVERNOR_ON_BAT=powersave
4229
4230# Set the min/max frequency available for the scaling governor.
4231# Possible values strongly depend on your CPU. For available frequencies see
4232# the output of tlp-stat -p.
4233#CPU_SCALING_MIN_FREQ_ON_AC=0
4234#CPU_SCALING_MAX_FREQ_ON_AC=0
4235#CPU_SCALING_MIN_FREQ_ON_BAT=0
4236#CPU_SCALING_MAX_FREQ_ON_BAT=0
4237
4238# Set energy performance hints (HWP) for Intel P-state governor:
4239# performance, balance_performance, default, balance_power, power
4240# Values are given in order of increasing power saving.
4241# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
4242CPU_HWP_ON_AC=balance_performance
4243CPU_HWP_ON_BAT=balance_power
4244
4245# Set Intel P-state performance: 0..100 (%).
4246# Limit the max/min P-state to control the power dissipation of the CPU.
4247# Values are stated as a percentage of the available performance.
4248# Requires an Intel Core i processor with intel_pstate driver.
4249#CPU_MIN_PERF_ON_AC=0
4250#CPU_MAX_PERF_ON_AC=100
4251#CPU_MIN_PERF_ON_BAT=0
4252#CPU_MAX_PERF_ON_BAT=30
4253
4254# Set the CPU "turbo boost" feature: 0=disable, 1=allow
4255# Requires an Intel Core i processor.
4256# Important:
4257# - This may conflict with your distribution's governor settings
4258# - A value of 1 does *not* activate boosting, it just allows it
4259#CPU_BOOST_ON_AC=1
4260#CPU_BOOST_ON_BAT=0
4261
4262# Minimize number of used CPU cores/hyper-threads under light load conditions:
4263# 0=disable, 1=enable.
4264SCHED_POWERSAVE_ON_AC=0
4265SCHED_POWERSAVE_ON_BAT=1
4266
4267# Kernel NMI Watchdog:
4268# 0=disable (default, saves power), 1=enable (for kernel debugging only).
4269NMI_WATCHDOG=0
4270
4271# Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
4272# Frequency voltage pairs are written to:
4273# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
4274# CAUTION: only use this, if you thoroughly understand what you are doing!
4275#PHC_CONTROLS="F:V F:V F:V F:V"
4276
4277# Set CPU performance versus energy savings policy:
4278# performance, balance-performance, default, balance-power, power.
4279# Values are given in order of increasing power saving.
4280# Requires kernel module msr and x86_energy_perf_policy from linux-tools.
4281ENERGY_PERF_POLICY_ON_AC=performance
4282ENERGY_PERF_POLICY_ON_BAT=balance-power
4283
4284# Disk devices; separate multiple devices with spaces (default: sda).
4285# Devices can be specified by disk ID also (lookup with: tlp diskid).
4286DISK_DEVICES="sda sdb"
4287
4288# Disk advanced power management level: 1..254, 255 (max saving, min, off).
4289# Levels 1..127 may spin down the disk; 255 allowable on most drives.
4290# Separate values for multiple disks with spaces. Use the special value 'keep'
4291# to keep the hardware default for the particular disk.
4292DISK_APM_LEVEL_ON_AC="254 254"
4293DISK_APM_LEVEL_ON_BAT="128 128"
4294
4295# Hard disk spin down timeout:
4296# 0: spin down disabled
4297# 1..240: timeouts from 5s to 20min (in units of 5s)
4298# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
4299# See 'man hdparm' for details.
4300# Separate values for multiple disks with spaces. Use the special value 'keep'
4301# to keep the hardware default for the particular disk.
4302#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
4303#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
4304
4305# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
4306# Separate values for multiple disks with spaces. Use the special value 'keep'
4307# to keep the kernel default scheduler for the particular disk.
4308#DISK_IOSCHED="cfq cfq"
4309
4310# AHCI link power management (ALPM) for disk devices:
4311# min_power, med_power_with_dipm(*), medium_power, max_performance.
4312# (*) Kernel >= 4.15 required, then recommended.
4313# Multiple values separated with spaces are tried sequentially until success.
4314SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
4315SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
4316
4317# Exclude host devices from AHCI link power management.
4318# Separate multiple hosts with spaces.
4319#SATA_LINKPWR_BLACKLIST="host1"
4320
4321# Runtime Power Management for AHCI host and disks devices:
4322# on=disable, auto=enable.
4323# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
4324#AHCI_RUNTIME_PM_ON_AC=on
4325#AHCI_RUNTIME_PM_ON_BAT=on
4326
4327# Seconds of inactivity before disk is suspended.
4328AHCI_RUNTIME_PM_TIMEOUT=15
4329
4330# PCI Express Active State Power Management (PCIe ASPM):
4331# default, performance, powersave.
4332PCIE_ASPM_ON_AC=performance
4333PCIE_ASPM_ON_BAT=powersave
4334
4335# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
4336# auto = mid on BAT, high on AC; default = use hardware defaults.
4337RADEON_POWER_PROFILE_ON_AC=high
4338RADEON_POWER_PROFILE_ON_BAT=low
4339
4340# Radeon dynamic power management method (DPM): battery, performance.
4341RADEON_DPM_STATE_ON_AC=performance
4342RADEON_DPM_STATE_ON_BAT=battery
4343
4344# Radeon DPM performance level: auto, low, high; auto is recommended.
4345RADEON_DPM_PERF_LEVEL_ON_AC=auto
4346RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4347
4348# WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4349WIFI_PWR_ON_AC=off
4350WIFI_PWR_ON_BAT=on
4351
4352# Disable wake on LAN: Y/N.
4353WOL_DISABLE=Y
4354
4355# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4356# A value of 0 disables, >=1 enables power saving (recommended: 1).
4357SOUND_POWER_SAVE_ON_AC=0
4358SOUND_POWER_SAVE_ON_BAT=0
4359
4360# Disable controller too (HDA only): Y/N.
4361SOUND_POWER_SAVE_CONTROLLER=N
4362
4363# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4364# Drive can be powered on again by releasing (and reinserting) the eject lever
4365# or by pressing the disc eject button on newer models.
4366# Note: an UltraBay/MediaBay hard disk is never powered off.
4367BAY_POWEROFF_ON_AC=0
4368BAY_POWEROFF_ON_BAT=0
4369# Optical drive device to power off (default sr0).
4370BAY_DEVICE="sr0"
4371
4372# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4373RUNTIME_PM_ON_AC=on
4374RUNTIME_PM_ON_BAT=auto
4375
4376# Exclude PCI(e) device adresses the following list from Runtime PM
4377# (separate with spaces). Use lspci to get the adresses (1st column).
4378#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4379
4380# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4381# Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4382# prevents accidential power-on of dGPU in hybrid graphics setups.
4383# Use "" to disable the feature completely.
4384# Separate multiple drivers with spaces.
4385#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4386
4387# Set to 0 to disable, 1 to enable USB autosuspend feature.
4388USB_AUTOSUSPEND=1
4389
4390# Exclude listed devices from USB autosuspend (separate with spaces).
4391# Use lsusb to get the ids.
4392# Note: input devices (usbhid) are excluded automatically
4393#USB_BLACKLIST="1111:2222 3333:4444"
4394
4395# Bluetooth devices are excluded from USB autosuspend:
4396# 0=do not exclude, 1=exclude.
4397USB_BLACKLIST_BTUSB=0
4398
4399# Phone devices are excluded from USB autosuspend:
4400# 0=do not exclude, 1=exclude (enable charging).
4401USB_BLACKLIST_PHONE=0
4402
4403# Printers are excluded from USB autosuspend:
4404# 0=do not exclude, 1=exclude.
4405USB_BLACKLIST_PRINTER=1
4406
4407# WWAN devices are excluded from USB autosuspend:
4408# 0=do not exclude, 1=exclude.
4409USB_BLACKLIST_WWAN=1
4410
4411# Include listed devices into USB autosuspend even if already excluded
4412# by the blacklists above (separate with spaces).
4413# Use lsusb to get the ids.
4414#USB_WHITELIST="1111:2222 3333:4444"
4415
4416# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4417# (workaround for USB devices that cause shutdown problems).
4418#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4419
4420# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4421# on system startup: 0=disable, 1=enable.
4422# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4423# are ignored when this is enabled!
4424#RESTORE_DEVICE_STATE_ON_STARTUP=0
4425RESTORE_DEVICE_STATE_ON_STARTUP=0
4426
4427# Radio devices to disable on startup: bluetooth, wifi, wwan.
4428# Separate multiple devices with spaces.
4429#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
4430DEVICES_TO_DISABLE_ON_STARTUP="bluetooth"
4431
4432# Radio devices to enable on startup: bluetooth, wifi, wwan.
4433# Separate multiple devices with spaces.
4434#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4435
4436# Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4437# (workaround for devices that are blocking shutdown).
4438#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4439
4440# Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4441# (to prevent other operating systems from missing radios).
4442#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4443
4444# Radio devices to enable on AC: bluetooth, wifi, wwan.
4445#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4446
4447# Radio devices to disable on battery: bluetooth, wifi, wwan.
4448#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4449
4450# Radio devices to disable on battery when not in use (not connected):
4451# bluetooth, wifi, wwan.
4452#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4453
4454# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4455# required). Charging starts when the remaining capacity falls below the
4456# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4457# Main / Internal battery (values in %)
4458#START_CHARGE_THRESH_BAT0=75
4459#STOP_CHARGE_THRESH_BAT0=80
4460# Ultrabay / Slice / Replaceable battery (values in %)
4461#START_CHARGE_THRESH_BAT1=75
4462#STOP_CHARGE_THRESH_BAT1=80
4463
4464# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4465#RESTORE_THRESHOLDS_ON_BAT=1
4466
4467# ------------------------------------------------------------------------------
4468# tlp-rdw - Parameters for the radio device wizard
4469# Possible devices: bluetooth, wifi, wwan.
4470
4471# Hints:
4472# - Parameters are disabled by default, remove the leading # to enable them
4473# - Separate multiple radio devices with spaces
4474
4475# Radio devices to disable on connect.
4476#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4477#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4478#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4479
4480# Radio devices to enable on disconnect.
4481#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4482#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4483#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4484
4485# Radio devices to enable/disable when docked.
4486#DEVICES_TO_ENABLE_ON_DOCK=""
4487#DEVICES_TO_DISABLE_ON_DOCK=""
4488
4489# Radio devices to enable/disable when undocked.
4490#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4491#DEVICES_TO_DISABLE_ON_UNDOCK=""
4492#+end_src
4493
4494*** shemshak
4495
4496#+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "shemshak")) "/sudo::/etc/default/tlp")
4497# ------------------------------------------------------------------------------
4498# tlp - Parameters for power saving
4499# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
4500
4501# Hint: some features are disabled by default, remove the leading # to enable
4502# them.
4503
4504# Set to 0 to disable, 1 to enable TLP.
4505TLP_ENABLE=1
4506
4507# Operation mode when no power supply can be detected: AC, BAT.
4508# Concerns some desktop and embedded hardware only.
4509TLP_DEFAULT_MODE=AC
4510
4511# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
4512# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
4513TLP_PERSISTENT_DEFAULT=0
4514
4515# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
4516# Non-zero value enables, zero disables laptop mode.
4517DISK_IDLE_SECS_ON_AC=0
4518DISK_IDLE_SECS_ON_BAT=2
4519
4520# Dirty page values (timeouts in secs).
4521MAX_LOST_WORK_SECS_ON_AC=15
4522MAX_LOST_WORK_SECS_ON_BAT=60
4523
4524# Hint: CPU parameters below are disabled by default, remove the leading #
4525# to enable them, otherwise kernel default values are used.
4526
4527# Select a CPU frequency scaling governor.
4528# Intel Core i processor with intel_pstate driver:
4529# powersave(*), performance.
4530# Older hardware with acpi-cpufreq driver:
4531# ondemand(*), powersave, performance, conservative, schedutil.
4532# (*) is recommended.
4533# Hint: use tlp-stat -p to show the active driver and available governors.
4534# Important:
4535# powersave for intel_pstate and ondemand for acpi-cpufreq are power
4536# efficient for *almost all* workloads and therefore kernel and most
4537# distributions have chosen them as defaults. If you still want to change,
4538# you should know what you're doing! You *must* disable your distribution's
4539# governor settings or conflicts will occur.
4540#CPU_SCALING_GOVERNOR_ON_AC=powersave
4541#CPU_SCALING_GOVERNOR_ON_BAT=powersave
4542
4543# Set the min/max frequency available for the scaling governor.
4544# Possible values strongly depend on your CPU. For available frequencies see
4545# the output of tlp-stat -p.
4546#CPU_SCALING_MIN_FREQ_ON_AC=0
4547#CPU_SCALING_MAX_FREQ_ON_AC=0
4548#CPU_SCALING_MIN_FREQ_ON_BAT=0
4549#CPU_SCALING_MAX_FREQ_ON_BAT=0
4550
4551# Set energy performance hints (HWP) for Intel P-state governor:
4552# performance, balance_performance, default, balance_power, power
4553# Values are given in order of increasing power saving.
4554# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
4555CPU_HWP_ON_AC=balance_performance
4556CPU_HWP_ON_BAT=balance_power
4557
4558# Set Intel P-state performance: 0..100 (%).
4559# Limit the max/min P-state to control the power dissipation of the CPU.
4560# Values are stated as a percentage of the available performance.
4561# Requires an Intel Core i processor with intel_pstate driver.
4562#CPU_MIN_PERF_ON_AC=0
4563#CPU_MAX_PERF_ON_AC=100
4564#CPU_MIN_PERF_ON_BAT=0
4565#CPU_MAX_PERF_ON_BAT=30
4566
4567# Set the CPU "turbo boost" feature: 0=disable, 1=allow
4568# Requires an Intel Core i processor.
4569# Important:
4570# - This may conflict with your distribution's governor settings
4571# - A value of 1 does *not* activate boosting, it just allows it
4572#CPU_BOOST_ON_AC=1
4573#CPU_BOOST_ON_BAT=0
4574
4575# Minimize number of used CPU cores/hyper-threads under light load conditions:
4576# 0=disable, 1=enable.
4577SCHED_POWERSAVE_ON_AC=0
4578SCHED_POWERSAVE_ON_BAT=1
4579
4580# Kernel NMI Watchdog:
4581# 0=disable (default, saves power), 1=enable (for kernel debugging only).
4582NMI_WATCHDOG=0
4583
4584# Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
4585# Frequency voltage pairs are written to:
4586# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
4587# CAUTION: only use this, if you thoroughly understand what you are doing!
4588#PHC_CONTROLS="F:V F:V F:V F:V"
4589
4590# Set CPU performance versus energy savings policy:
4591# performance, balance-performance, default, balance-power, power.
4592# Values are given in order of increasing power saving.
4593# Requires kernel module msr and x86_energy_perf_policy from linux-tools.
4594ENERGY_PERF_POLICY_ON_AC=performance
4595ENERGY_PERF_POLICY_ON_BAT=balance-power
4596
4597# Disk devices; separate multiple devices with spaces (default: sda).
4598# Devices can be specified by disk ID also (lookup with: tlp diskid).
4599DISK_DEVICES="sda sdb"
4600
4601# Disk advanced power management level: 1..254, 255 (max saving, min, off).
4602# Levels 1..127 may spin down the disk; 255 allowable on most drives.
4603# Separate values for multiple disks with spaces. Use the special value 'keep'
4604# to keep the hardware default for the particular disk.
4605DISK_APM_LEVEL_ON_AC="254 254"
4606DISK_APM_LEVEL_ON_BAT="128 128"
4607
4608# Hard disk spin down timeout:
4609# 0: spin down disabled
4610# 1..240: timeouts from 5s to 20min (in units of 5s)
4611# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
4612# See 'man hdparm' for details.
4613# Separate values for multiple disks with spaces. Use the special value 'keep'
4614# to keep the hardware default for the particular disk.
4615#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
4616#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
4617
4618# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
4619# Separate values for multiple disks with spaces. Use the special value 'keep'
4620# to keep the kernel default scheduler for the particular disk.
4621#DISK_IOSCHED="cfq cfq"
4622
4623# AHCI link power management (ALPM) for disk devices:
4624# min_power, med_power_with_dipm(*), medium_power, max_performance.
4625# (*) Kernel >= 4.15 required, then recommended.
4626# Multiple values separated with spaces are tried sequentially until success.
4627SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
4628SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
4629
4630# Exclude host devices from AHCI link power management.
4631# Separate multiple hosts with spaces.
4632#SATA_LINKPWR_BLACKLIST="host1"
4633
4634# Runtime Power Management for AHCI host and disks devices:
4635# on=disable, auto=enable.
4636# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
4637#AHCI_RUNTIME_PM_ON_AC=on
4638#AHCI_RUNTIME_PM_ON_BAT=on
4639
4640# Seconds of inactivity before disk is suspended.
4641AHCI_RUNTIME_PM_TIMEOUT=15
4642
4643# PCI Express Active State Power Management (PCIe ASPM):
4644# default, performance, powersave.
4645PCIE_ASPM_ON_AC=performance
4646PCIE_ASPM_ON_BAT=powersave
4647
4648# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
4649# auto = mid on BAT, high on AC; default = use hardware defaults.
4650RADEON_POWER_PROFILE_ON_AC=high
4651RADEON_POWER_PROFILE_ON_BAT=low
4652
4653# Radeon dynamic power management method (DPM): battery, performance.
4654RADEON_DPM_STATE_ON_AC=performance
4655RADEON_DPM_STATE_ON_BAT=battery
4656
4657# Radeon DPM performance level: auto, low, high; auto is recommended.
4658RADEON_DPM_PERF_LEVEL_ON_AC=auto
4659RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4660
4661# WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4662WIFI_PWR_ON_AC=off
4663WIFI_PWR_ON_BAT=on
4664
4665# Disable wake on LAN: Y/N.
4666WOL_DISABLE=Y
4667
4668# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4669# A value of 0 disables, >=1 enables power saving (recommended: 1).
4670SOUND_POWER_SAVE_ON_AC=0
4671SOUND_POWER_SAVE_ON_BAT=0
4672
4673# Disable controller too (HDA only): Y/N.
4674SOUND_POWER_SAVE_CONTROLLER=N
4675
4676# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4677# Drive can be powered on again by releasing (and reinserting) the eject lever
4678# or by pressing the disc eject button on newer models.
4679# Note: an UltraBay/MediaBay hard disk is never powered off.
4680BAY_POWEROFF_ON_AC=0
4681BAY_POWEROFF_ON_BAT=0
4682# Optical drive device to power off (default sr0).
4683BAY_DEVICE="sr0"
4684
4685# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4686RUNTIME_PM_ON_AC=on
4687RUNTIME_PM_ON_BAT=auto
4688
4689# Exclude PCI(e) device adresses the following list from Runtime PM
4690# (separate with spaces). Use lspci to get the adresses (1st column).
4691#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4692RUNTIME_PM_BLACKLIST="01:00.0"
4693
4694# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4695# Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4696# prevents accidential power-on of dGPU in hybrid graphics setups.
4697# Use "" to disable the feature completely.
4698# Separate multiple drivers with spaces.
4699#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4700
4701# Set to 0 to disable, 1 to enable USB autosuspend feature.
4702USB_AUTOSUSPEND=1
4703
4704# Exclude listed devices from USB autosuspend (separate with spaces).
4705# Use lsusb to get the ids.
4706# Note: input devices (usbhid) are excluded automatically
4707#USB_BLACKLIST="1111:2222 3333:4444"
4708
4709# Bluetooth devices are excluded from USB autosuspend:
4710# 0=do not exclude, 1=exclude.
4711USB_BLACKLIST_BTUSB=0
4712
4713# Phone devices are excluded from USB autosuspend:
4714# 0=do not exclude, 1=exclude (enable charging).
4715USB_BLACKLIST_PHONE=0
4716
4717# Printers are excluded from USB autosuspend:
4718# 0=do not exclude, 1=exclude.
4719USB_BLACKLIST_PRINTER=1
4720
4721# WWAN devices are excluded from USB autosuspend:
4722# 0=do not exclude, 1=exclude.
4723USB_BLACKLIST_WWAN=1
4724
4725# Include listed devices into USB autosuspend even if already excluded
4726# by the blacklists above (separate with spaces).
4727# Use lsusb to get the ids.
4728#USB_WHITELIST="1111:2222 3333:4444"
4729
4730# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4731# (workaround for USB devices that cause shutdown problems).
4732#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4733
4734# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4735# on system startup: 0=disable, 1=enable.
4736# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4737# are ignored when this is enabled!
4738#RESTORE_DEVICE_STATE_ON_STARTUP=0
4739RESTORE_DEVICE_STATE_ON_STARTUP=1
4740
4741# Radio devices to disable on startup: bluetooth, wifi, wwan.
4742# Separate multiple devices with spaces.
4743#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
4744
4745# Radio devices to enable on startup: bluetooth, wifi, wwan.
4746# Separate multiple devices with spaces.
4747#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4748
4749# Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4750# (workaround for devices that are blocking shutdown).
4751#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4752
4753# Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4754# (to prevent other operating systems from missing radios).
4755#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4756
4757# Radio devices to enable on AC: bluetooth, wifi, wwan.
4758#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4759
4760# Radio devices to disable on battery: bluetooth, wifi, wwan.
4761#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4762
4763# Radio devices to disable on battery when not in use (not connected):
4764# bluetooth, wifi, wwan.
4765#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4766
4767# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4768# required). Charging starts when the remaining capacity falls below the
4769# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4770# Main / Internal battery (values in %)
4771#START_CHARGE_THRESH_BAT0=75
4772#STOP_CHARGE_THRESH_BAT0=80
4773# Ultrabay / Slice / Replaceable battery (values in %)
4774#START_CHARGE_THRESH_BAT1=75
4775#STOP_CHARGE_THRESH_BAT1=80
4776
4777# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4778#RESTORE_THRESHOLDS_ON_BAT=1
4779
4780# ------------------------------------------------------------------------------
4781# tlp-rdw - Parameters for the radio device wizard
4782# Possible devices: bluetooth, wifi, wwan.
4783
4784# Hints:
4785# - Parameters are disabled by default, remove the leading # to enable them
4786# - Separate multiple radio devices with spaces
4787
4788# Radio devices to disable on connect.
4789#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4790#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4791#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4792
4793# Radio devices to enable on disconnect.
4794#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4795#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4796#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4797
4798# Radio devices to enable/disable when docked.
4799#DEVICES_TO_ENABLE_ON_DOCK=""
4800#DEVICES_TO_DISABLE_ON_DOCK=""
4801
4802# Radio devices to enable/disable when undocked.
4803#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4804#DEVICES_TO_DISABLE_ON_UNDOCK=""
4805#+end_src
4806
4807** X
4808
4809*** xprofile
4810:PROPERTIES:
4811:header-args+: :tangle ~/.xprofile
4812:END:
4813
4814=~/.xprofile= is similar in style to =~/.xinitrc=, but on the
4815contrary, it's automatically sourced by LightDM, my display manager of
4816choice.
4817
4818#+begin_src sh :tangle no
4819xset -b # disable bell
4820xset r rate 200 45 # repeat delay (ms) and rate (repeats/sec)
4821
4822# setxkbmap -option compose:ralt
4823
4824setxkbmap -option ctrl:nocaps # turn capslock into control
4825setxkbmap -option altwin:swap_alt_win # swap alt and super
4826
4827if [ $(hostname) = "plasma" ]
4828then
4829 setxkbmap -option ctrl:rctrl_ralt # turn right control into right alt
4830fi
4831
4832if [ $(hostname) = "enigma" ]
4833then
4834 xmodmap -e "keycode 135 = Alt_R" # remap menu key to alt
4835fi
4836
4837light -Scrs "intel_backlight" 2
4838
4839source $HOME/.zprofile
4840
4841export _JAVA_AWT_WM_NONREPARENTING=1
4842export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4843
4844if [ $(hostname) = "plasma" ]
4845then
4846 unlock-def-gk.py &
4847fi
4848
4849bspwm &
4850#+end_src
4851
4852*** X resources
4853
4854**** Xresources
4855:PROPERTIES:
4856:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
4857:END:
4858
4859#+begin_src conf-xdefaults
4860#include ".Xresources.d/fonts"
4861! #include ".Xresources.d/colors"
4862#include ".Xresources.d/emacs"
4863#include ".Xresources.d/rxvt-unicode"
4864#+end_src
4865
4866**** Xresources.d
4867
4868***** fonts
4869:PROPERTIES:
4870:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
4871:END:
4872
4873#+begin_src conf-xdefaults
4874Xft.lcdfilter: lcddefault
4875Xft.antialias: true
4876Xft.autohint: 0
4877Xft.hinting: true
4878Xft.hintstyle: hintslight
4879! Xft.hintstyle: hintfull
4880Xft.rgba: rgb
4881Xft.dpi: 96
4882#+end_src
4883
4884***** colors
4885:PROPERTIES:
4886:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
4887:END:
4888
4889#+begin_src conf-xdefaults :tangle no
4890#include "gruvbox-light.xresources"
4891! #include "gruvbox-dark.xresources"
4892#include "gruvbox-urxvt256.xresources"
4893#+end_src
4894
4895#+begin_src conf-xdefaults :tangle no
4896! -----------------------------------------------------------------------------
4897! File: gruvbox-light.xresources
4898! Description: Retro groove colorscheme generalized
4899! Author: morhetz <morhetz@gmail.com>
4900! Source: https://github.com/morhetz/gruvbox-generalized
4901! Last Modified: 6 Sep 2014
4902! -----------------------------------------------------------------------------
4903
4904! hard contrast: *background: #f9f5d7
4905*background: #fbf1c7
4906! soft contrast: *background: #f2e5bc
4907*foreground: #3c3836
4908! Black + DarkGrey
4909*color0: #fdf4c1
4910*color8: #928374
4911! DarkRed + Red
4912*color1: #cc241d
4913*color9: #9d0006
4914! DarkGreen + Green
4915*color2: #98971a
4916*color10: #79740e
4917! DarkYellow + Yellow
4918*color3: #d79921
4919*color11: #b57614
4920! DarkBlue + Blue
4921*color4: #458588
4922*color12: #076678
4923! DarkMagenta + Magenta
4924*color5: #b16286
4925*color13: #8f3f71
4926! DarkCyan + Cyan
4927*color6: #689d6a
4928*color14: #427b58
4929! LightGrey + White
4930*color7: #7c6f64
4931*color15: #3c3836
4932#+end_src
4933
4934#+begin_src conf-xdefaults :tangle no
4935! -----------------------------------------------------------------------------
4936! File: gruvbox-dark.xresources
4937! Description: Retro groove colorscheme generalized
4938! Author: morhetz <morhetz@gmail.com>
4939! Source: https://github.com/morhetz/gruvbox-generalized
4940! Last Modified: 6 Sep 2014
4941! -----------------------------------------------------------------------------
4942
4943! hard contrast: *background: #1d2021
4944*background: #282828
4945! soft contrast: *background: #32302f
4946*foreground: #ebdbb2
4947! Black + DarkGrey
4948*color0: #282828
4949*color8: #928374
4950! DarkRed + Red
4951*color1: #cc241d
4952*color9: #fb4934
4953! DarkGreen + Green
4954*color2: #98971a
4955*color10: #b8bb26
4956! DarkYellow + Yellow
4957*color3: #d79921
4958*color11: #fabd2f
4959! DarkBlue + Blue
4960*color4: #458588
4961*color12: #83a598
4962! DarkMagenta + Magenta
4963*color5: #b16286
4964*color13: #d3869b
4965! DarkCyan + Cyan
4966*color6: #689d6a
4967*color14: #8ec07c
4968! LightGrey + White
4969*color7: #a89984
4970*color15: #ebdbb2
4971#+end_src
4972
4973#+begin_src conf-xdefaults :tangle no
4974! -----------------------------------------------------------------------------
4975! File: gruvbox-urxvt256.xresources
4976! Description: Retro groove colorscheme generalized
4977! Author: morhetz <morhetz@gmail.com>
4978! Source: https://github.com/morhetz/gruvbox-generalized
4979! Last Modified: 13 Dec 2013
4980! -----------------------------------------------------------------------------
4981
4982URxvt.color24: #076678
4983URxvt.color66: #427b58
4984URxvt.color88: #9d0006
4985URxvt.color96: #8f3f71
4986URxvt.color100: #79740e
4987URxvt.color108: #8ec07c
4988URxvt.color109: #83a598
4989URxvt.color130: #af3a03
4990URxvt.color136: #b57614
4991URxvt.color142: #b8bb26
4992URxvt.color167: #fb4934
4993URxvt.color175: #d3869b
4994URxvt.color208: #fe8019
4995URxvt.color214: #fabd2f
4996URxvt.color223: #ebdbb2
4997URxvt.color228: #f2e5bc
4998URxvt.color229: #fbf1c7
4999URxvt.color230: #f9f5d7
5000URxvt.color234: #1d2021
5001URxvt.color235: #282828
5002URxvt.color236: #32302f
5003URxvt.color237: #3c3836
5004URxvt.color239: #504945
5005URxvt.color241: #665c54
5006URxvt.color243: #7c6f64
5007URxvt.color244: #928374
5008URxvt.color245: #928374
5009URxvt.color246: #a89984
5010URxvt.color248: #bdae93
5011URxvt.color250: #d5c4a1
5012#+end_src
5013
5014***** emacs
5015:PROPERTIES:
5016:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
5017:END:
5018
5019#+begin_src conf-xdefaults
5020Emacs.menuBar: off
5021Emacs.toolBar: off
5022Emacs.verticalScrollBars: off
5023Emacs.cursorBlink: off
5024Emacs.FontBackend: xft,x
5025! Emacs.font: Ubuntu Mono-12
5026! Emacs.font: Triplicate T4C-11
5027! Emacs.font: Ubuntu Mono-10.5
5028! Emacs.font: Ubuntu Mono-12
5029! Emacs.font: Iosevka-11
5030
5031! Emacs.font: Fira Mono:size=15
5032! Emacs.font: DejaVu Sans Mono:size=15
5033! Emacs.font: Inconsolata:size=17
5034! Emacs.font: Inconsolata:size=16
5035! Emacs.font: Inconsolata LGC:size=14
5036! Emacs.font: Source Code Pro Medium-10.5
5037Emacs.font: Source Code Pro:size=14
5038! Emacs.font: Ubuntu Mono:size=16
5039! Emacs.font: Iosevka:size=16
5040#+end_src
5041
5042***** rxvt-unicode
5043:PROPERTIES:
5044:header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
5045:END:
5046
5047#+begin_src conf-xdefaults
5048! Font
5049URxvt.font: xft:source code pro:pixelsize=14:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
5050URxvt.boldFont: xft:source code pro semibold:pixelsize=14:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
5051URxvt.italicFont: xft:source code pro italic:pixelsize=14:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
5052URxvt.bolditalicFont: xft:source code pro semibold italic:pixelsize=14:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
5053
5054URxvt.xftAntialias: true
5055URxvt.letterSpace: 0
5056
5057URxvt.depth: 0
5058URxvt.loginShell: true
5059URxvt.saveLines: 100000
5060URxvt.internalBorder: 3
5061URxvt.lineSpace: 0
5062URxvt.scrollBar: false
5063URxvt.scrollStyle: rxvt
5064URxvt*scrollTtyOutput: false
5065URxvt*scrollWithBuffer: true
5066URxvt*scrollTtyKeypress: true
5067URxvt.keysym.Shift-Up: command:\033]720;1\007
5068URxvt.keysym.Shift-Down: command:\033]721;1\007
5069
5070URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select
5071URxvt.url-select.launcher: firefox
5072URxvt.url-select.underline: true
5073URxvt.keysym.M-u: perl:url-select:select_next
5074URxvt.keysym.M-Escape: perl:keyboard-select:activate
5075URxvt.keysym.M-s: perl:keyboard-select:search
5076URxvt.url-launcher: /usr/bin/firefox
5077URxvt.matcher.button: 1
5078URxvt.iso14755: false
5079URxvt.iso14755_53: false
5080URxvt.keysym.M-c: perl:clipboard:copy
5081URxvt.keysym.M-v: perl:clipboard:paste
5082URxvt.keysym.C-A-V: perl:clipboard:paste_escaped
5083URxvt.keysym.C-Up: font-size:increase
5084URxvt.keysym.C-Down: font-size:decrease
5085URxvt.keysym.C-S-Up: font-size:incglobal
5086URxvt.keysym.C-S-Down: font-size:decglobal
5087URxvt.keysym.C-equal: font-size:reset
5088!URxvt.keysym.C-question: font-size:show
5089
5090URxvt.iconFile: /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
5091
5092!urxvt*foreground: white
5093!urxvt*background: black
5094
5095!*color0: #2E3436
5096!*color1: #a40000
5097!*color2: #4E9A06
5098!*color3: #C4A000
5099!*color4: #3465A4
5100!*color5: #75507B
5101!*color6: #ce5c00
5102!*color7: #babdb9
5103!*color8: #555753
5104!*color9: #EF2929
5105!*color10: #8AE234
5106!*color11: #FCE94F
5107!*color12: #729FCF
5108!*color13: #AD7FA8
5109!*color14: #fcaf3e
5110!*color15: #EEEEEC
5111
5112!URxvt.foreground: #C8C8C8
5113!URxvt.background: #FFFFFF
5114
5115!! black
5116!*color0: #2E3436
5117!*color8: #555753
5118!! red
5119!*color1: #a40000
5120!*color9: #EF2929
5121!! green
5122!*color2: #4E9A06
5123!*color10: #8AE234
5124!! yellow
5125!*color3: #C4A000
5126!*color11: #FCE94F
5127!! blue
5128!*color4: #3465A4
5129!*color12: #729FCF
5130!! purple
5131!*color5: #75507B
5132!*color13: #AD7FA8
5133!! orange (replaces cyan)
5134!*color6: #ce5c00
5135!*color14: #fcaf3e
5136!! white
5137!*color7: #babdb9
5138!*color15: #EEEEEC
5139
5140! Tango colour theme for rxvt-unicode
5141URxvt.background: #FFFFFF
5142URxvt.foreground: #000000
5143
5144! Black
5145URxvt.color0: #2E3436
5146URxvt.color8: #757773
5147
5148! Red
5149URxvt.color1: #CC0000
5150URxvt.color9: #EF2929
5151
5152! Green
5153URxvt.color2: #4E9A06
5154URxvt.color10: #8AE234
5155
5156! Yellow
5157URxvt.color3: #C4A000
5158URxvt.color11: #FCE94F
5159
5160! Blue
5161URxvt.color4: #3465A4
5162URxvt.color12: #729FCF
5163
5164! Magenta
5165URxvt.color5: #75507B
5166URxvt.color13: #AD7FA8
5167
5168!! Cyan
5169!URxvt.color6: #06989A
5170!URxvt.color14: #34E2E2
5171! orange (replaces cyan)
5172,*color6: #ce5c00
5173,*color14: #fcaf3e
5174
5175! White
5176URxvt.color7: #D3D7CF
5177URxvt.color15: #EEEEEC
5178#+end_src
5179
5180*** xkb us_ab keyboard layout
5181
5182#+begin_src conf :tangle "/sudo::/usr/share/X11/xkb/symbols/us_ab" :comments none
5183default partial alphanumeric_keys
5184xkb_symbols "us_ab" {
5185 include "us(basic)"
5186 name[Group1]= "English (US)(aminb)";
5187
5188 key <MENU> { [ Alt_R ] };
5189};
5190#+end_src
5191
5192** XDG
5193:PROPERTIES:
5194:header-args+: :tangle ~/.config/user-dirs.dirs
5195:END:
5196
5197#+begin_src conf
5198XDG_DESKTOP_DIR="$HOME/Desktop"
5199XDG_DOCUMENTS_DIR="$HOME/usr/docs"
5200XDG_DOWNLOAD_DIR="$HOME/usr/dls"
5201XDG_MUSIC_DIR="$HOME/usr/music"
5202XDG_PICTURES_DIR="$HOME/usr/pics"
5203XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
5204XDG_TEMPLATES_DIR="$HOME/usr/Templates"
5205XDG_VIDEOS_DIR="$HOME/usr/vids"
5206#+end_src
5207
5208** Zathura
5209:PROPERTIES:
5210:header-args+: :tangle ~/.config/zathura/zathurarc
5211:END:
5212
5213#+begin_src conf
5214set smooth-scroll true
5215set selection-clipboard clipboard
5216set zoom-step 05
5217set default-bg "#272727"
5218set statusbar-bg "#272727"
5219set inputbar-bg "#373737"
5220#+end_src
5221
5222** Zsh
5223
5224My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
5225[[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
5226installed.
5227
5228*** zimrc
5229:PROPERTIES:
5230:header-args+: :tangle ~/.zimrc
5231:END:
5232
5233#+begin_src sh
5234
5235
5236#################
5237# CORE SETTINGS #
5238#################
5239
5240#
5241# Zim settings
5242#
5243
5244# Select what modules you would like enabled.
5245# The second line of modules may depend on options set by modules in the first
5246# line. These dependencies are noted on the respective module's README.md.
5247zmodules=(directory environment git git-info history input ssh utility custom \
5248 syntax-highlighting history-substring-search prompt completion)
5249
5250
5251###################
5252# MODULE SETTINGS #
5253###################
5254
5255#
5256# Prompt
5257#
5258
5259# Set your desired prompt here
5260zprompt_theme='pure'
5261#PURE_PROMPT_SYMBOL=λ
5262#PURE_PROMPT_SYMBOL=δ
5263PURE_PROMPT_SYMBOL=➜
5264
5265#
5266# Completion
5267#
5268
5269# set an optional host-specific filename for the completion cache file
5270# if none is provided, the default '.zcompdump' is used.
5271#zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
5272
5273#
5274# Utility
5275#
5276
5277# Uncomment to enable command correction prompts
5278# See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
5279setopt CORRECT
5280
5281#
5282# Environment
5283#
5284
5285# Set the string below to the desired terminal title format string.
5286# The terminal title is redrawn upon directory change, however, variables like
5287# ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
5288# http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
5289# The example below uses the following format: 'username@host:/current/directory'
5290ztermtitle='%n@%m:%~'
5291
5292#
5293# Input
5294#
5295
5296# Uncomment to enable double-dot expansion.
5297# This appends '../' to your input for each '.' you type after an initial '..'
5298#zdouble_dot_expand='true'
5299
5300#
5301# Syntax-Highlighting
5302#
5303
5304# This determines what highlighters will be used with the syntax-highlighting module.
5305# Documentation of the highlighters can be found here:
5306# https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
5307# For (u)rxvt, termite and gnome-terminal users,
5308# removing the 'cursor' highlighter will fix the disappearing cursor problem
5309#zhighlighters=(main brackets cursor)
5310zhighlighters=(main brackets pattern)
5311
5312
5313#
5314# SSH
5315#
5316
5317# Load these ssh identities with the ssh module
5318zssh_ids=(id_ed25519_bandali)
5319
5320
5321#
5322# Pacman
5323#
5324
5325# Set (optional) pacman front-end.
5326zpacman_frontend='yay'
5327
5328# Load any helper scripts as defined here
5329#zpacman_helper=(aur)
5330#+end_src
5331
5332*** zlogin
5333:PROPERTIES:
5334:header-args+: :tangle ~/.zlogin
5335:END:
5336
5337#+begin_src sh
5338
5339
5340#
5341# User configuration sourced by login shells
5342#
5343
5344# Initialize zim
5345[[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
5346#+end_src
5347
5348*** zprofile
5349:PROPERTIES:
5350:header-args+: :tangle ~/.zprofile
5351:END:
5352
5353#+begin_src sh
5354#PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
5355#PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
5356export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
5357export XDG_CONFIG_HOME=$HOME/.config
5358export XDG_DATA_HOME=$HOME/.local/share
5359export XDG_DATA_DIRS=/usr/local/share:/usr/share
5360export MAILDIR="$HOME/mail"
5361export CVS_RSH=ssh
5362#export MATHMODELS=$HOME/src/eiffel/mathmodels
5363#export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
5364#export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
5365
5366# Eiffel2Java stuff
5367#export JAVA_HOME=/usr/lib/jvm/default
5368#export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
5369#export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
5370#export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
5371
5372#export PATH="$HOME/usr/build/pvs:$PATH"
5373#export SBCLISP_HOME=/usr/share/sbcl-source
5374#export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
5375
5376export MOZ_USE_XINPUT2=1 # precise scrolling in firefox
5377
5378#export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
5379#export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
5380
5381export NIXPKGS=$HOME/src/git/nixpkgs
5382
5383if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
5384#+end_src
5385
5386*** zshenv
5387:PROPERTIES:
5388:header-args+: :tangle ~/.zshenv
5389:END:
5390
5391#+begin_src sh
5392# Ensure that a non-login, non-interactive shell has a defined environment.
5393if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
5394 source "${ZDOTDIR:-$HOME}/.zprofile"
5395fi
5396#+end_src
5397
5398*** zshrc
5399:PROPERTIES:
5400:header-args+: :tangle ~/.zshrc
5401:END:
5402
5403#+begin_src sh
5404# Bash-like navigation
5405#export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
5406#export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
5407export WORDCHARS='*?[]~=&;!#$%^(){}<>'
5408#ZLE_SPACE_SUFFIX_CHARS=$'|&'
5409
5410#disable -r time # disable shell reserved word
5411#alias time='time -p' # -p for POSIX output
5412
5413# rehash if last command was pacaur or pacman
5414# (so that zsh picks up changes in $PATH immediately)
5415TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
5416
5417#
5418# User configuration sourced by interactive shells
5419#
5420
5421# Change default zim location
5422export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
5423
5424# Start zim
5425[[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
5426
5427ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
5428#ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
5429
5430setopt globdots
5431
5432source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
5433# source ~/.zsh/zsh-autopair/autopair.zsh
5434
5435
5436### fzf ###
5437
5438source /usr/share/fzf/key-bindings.zsh
5439source /usr/share/fzf/completion.zsh
5440
5441# Accept history selection instead of putting it on
5442# the command line
5443fzf-history-widget-accept() {
5444 fzf-history-widget
5445 zle accept-line
5446}
5447#zle -N fzf-history-widget-accept
5448#bindkey '^R' fzf-history-widget-accept
5449
5450# alt+c preview
5451export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
5452
5453### fzf ###
5454
5455
5456# aliases
5457alias mpv="mpv --ytdl-format mp4"
5458alias mv="mv -iv"
5459alias cp="cp -iv"
5460alias scl=systemctl
5461alias jcl=journalctl
5462alias m="mbsync uwaterloo; mbsync amin"
5463alias best="youtube-dl -f best"
5464alias sd="ssh deb"
5465alias sf="ssh fp"
5466alias sn="ssh nix"
5467
5468aur() {
5469 cd ~/usr/build
5470 git clone https://aur.archlinux.org/${1}.git
5471 cd ${1}
5472}
5473
5474# i-beam cursor
5475echo -e "\033[5 q"
5476#echo -e "\033[6 q"
5477#+end_src
5478
5479* Scripts
5480
5481This section contains various useful scripts and the ones used by the
5482programs above. For instance, =toggle-tablet= for switching to and
5483from tablet mode on my X220T, =toggle-presentation-mode= for toggling
5484Xfce's presentation mode which keeps the screen awake, and
5485=rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
5486exact brightness value.
5487
5488** battery-percentage-time
5489:PROPERTIES:
5490:header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/sh"
5491:END:
5492
5493#+begin_src sh :tangle no
5494dbus_send() {
5495 label=$1
5496 dbus-send --print-reply=literal --system \
5497 --dest=org.freedesktop.UPower \
5498 /org/freedesktop/UPower/devices/battery_BAT0 \
5499 org.freedesktop.DBus.Properties.Get \
5500 string:org.freedesktop.UPower.Device \
5501 string:"${label}" | awk '{print $3}'
5502}
5503
5504perc=$(dbus_send 'Percentage')
5505state=$(dbus_send 'State')
5506
5507if [ "$state" -eq 2 ]; then # Discharging
5508 secs=$(dbus_send 'TimeToEmpty')
5509elif [ "$state" -eq 1 ]; then # Charging
5510 secs=$(dbus_send 'TimeToFull')
5511fi
5512
5513printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60))
5514#+end_src
5515
5516** my-i3status.py
5517:PROPERTIES:
5518:header-args+: :tangle ~/.local/bin/my-i3status.py :shebang "#!/usr/bin/env python2"
5519:END:
5520
5521#+begin_src python :comments none
5522# -*- coding: utf-8 -*-
5523
5524# This script is a simple wrapper which prefixes each i3status line with custom
5525# information. It is based on:
5526# https://github.com/i3/i3status/blob/master/contrib/wrapper.py
5527#
5528# In ~/.i3status.conf, add the following line:
5529# output_format = "i3bar"
5530# in the 'general' section.
5531# Then, in ~/.config/i3/config or ~/.config/sway/config add:
5532# status_command i3status | my-i3status.py
5533# in the 'bar' section. Make sure my-i3status.py is in $PATH.
5534#
5535# © 2012 Valentin Haenel <valentin.haenel@gmx.de>
5536# © 2018 Amin Bandali <bandali@gnu.org>
5537#
5538# This program is free software. It comes without any warranty, to the extent
5539# permitted by applicable law. You can redistribute it and/or modify it under
5540# the terms of the Do What The Fuck You Want To Public License (WTFPL), Version
5541# 2, as published by Sam Hocevar. See http://sam.zoy.org/wtfpl/COPYING for more
5542# details.
5543
5544import sys
5545import json
5546import os
5547
5548def get_nosleep():
5549 """ Return true if ~/.nosleep exists. """
5550 return os.path.isfile(os.path.expanduser("~/.nosleep"))
5551
5552def print_line(message):
5553 """ Non-buffered printing to stdout. """
5554 sys.stdout.write(message + '\n')
5555 sys.stdout.flush()
5556
5557def read_line():
5558 """ Interrupted respecting reader for stdin. """
5559 # try reading a line, removing any extra whitespace
5560 try:
5561 line = sys.stdin.readline().strip()
5562 # i3status sends EOF, or an empty line
5563 if not line:
5564 sys.exit(3)
5565 return line
5566 # exit on ctrl-c
5567 except KeyboardInterrupt:
5568 sys.exit()
5569
5570if __name__ == '__main__':
5571 # Skip the first line which contains the version header.
5572 print_line(read_line())
5573
5574 # The second line contains the start of the infinite array.
5575 print_line(read_line())
5576
5577 while True:
5578 line, prefix = read_line(), ''
5579 # ignore comma at start of lines
5580 if line.startswith(','):
5581 line, prefix = line[1:], ','
5582
5583 if get_nosleep():
5584 j = json.loads(line)
5585 # insert information into the start of the json, but could be anywhere
5586 j.insert(0, {'full_text' : '🖵 ', 'name' : 'nosleep'})
5587 # and echo back new encoded json
5588 print_line(prefix+json.dumps(j))
5589 else:
5590 print_line(prefix+line)
5591#+end_src
5592
5593** rofi-light
5594:PROPERTIES:
5595:header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
5596:END:
5597
5598#+begin_src bash
5599cur=$(light -G)
5600val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 12)
5601[ -n "$val" ] && light -S $val
5602#+end_src
5603
5604** rofi-remmina.py
5605:PROPERTIES:
5606:header-args+: :tangle ~/.local/bin/rofi-remmina.py :shebang "#!/usr/bin/env python2"
5607:END:
5608
5609#+begin_src python
5610import ConfigParser
5611import os
5612from subprocess import Popen, PIPE
5613
5614remmina_dir = os.path.expanduser("~/.local/share/remmina")
5615
5616fdict = dict()
5617
5618for f in os.listdir(remmina_dir):
5619 fp = os.path.join(remmina_dir, f)
5620 c = ConfigParser.ConfigParser()
5621 c.read(fp)
5622 n = c.get('remmina', 'name')
5623 fdict[n] = fp
5624
5625lines = max(min(15, len(fdict)), 1);
5626width = len(max(fdict.keys(), key=len))
5627rofi = Popen(["rofi", "-i", "-dmenu", \
5628 "-l", str(lines), "-width", str(width), \
5629 "-p", "connection"], stdout=PIPE, stdin=PIPE)
5630selected = rofi.communicate("\n" \
5631 .join(fdict.keys()) \
5632 .encode("utf-8"))[0] \
5633 .decode("utf-8") \
5634 .strip()
5635rofi.wait()
5636
5637r = Popen(["remmina", "-c", fdict[selected]])
5638r.wait()
5639#+end_src
5640
5641** s (run sway)
5642:PROPERTIES:
5643:header-args+: :tangle ~/.local/bin/s :shebang "#!/bin/bash"
5644:END:
5645
5646#+begin_src bash
5647export _JAVA_AWT_WM_NONREPARENTING=1
5648export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
5649light -Nr 2
5650source $HOME/.zprofile
5651sway
5652#+end_src
5653
5654** sway-ws-util
5655:PROPERTIES:
5656:header-args+: :tangle ~/.local/bin/sway-ws-util :shebang "#!/bin/bash"
5657:END:
5658
5659#+begin_src bash
5660curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name')
5661[[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1))
5662[[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1))
5663dest_ws=-1
5664op=-1
5665
5666if [ "$1" = "switch" ] || [ "$1" = "move" ]; then
5667 op="$1"
5668 if [ "$2" = "prev" ]; then
5669 dest_ws="$prev_ws"
5670 elif [ "$2" = "next" ]; then
5671 dest_ws="$next_ws"
5672 else
5673 echo "Usage: $0 $1 {prev|next} [follow]"
5674 exit 1
5675 fi
5676else
5677 echo "Usage: $0 {switch|move} {prev|next} [follow]"
5678 exit 1
5679fi
5680
5681if [ "$op" = "switch" ]; then
5682 sway workspace "$dest_ws"
5683elif [ "$op" = "move" ]; then
5684 sway move container to workspace "$dest_ws"
5685 if [ "$3" = "follow" ]; then
5686 sway workspace "$dest_ws"
5687 fi
5688fi
5689#+end_src
5690
5691** toggle-layout
5692:PROPERTIES:
5693:header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
5694:END:
5695
5696#+begin_src bash :tangle no
5697lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
5698
5699if [ "$lang" = "us" ]; then
5700 setxkbmap ir
5701else
5702 setxkbmap us
5703 # xmodmap $HOME/.Xmodmap
5704fi
5705#+end_src
5706
5707** toggle-presentation-mode
5708:PROPERTIES:
5709:header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
5710:END:
5711
5712#+begin_src bash :tangle no
5713xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
5714#+end_src
5715
5716** toggle-tablet
5717:PROPERTIES:
5718:header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
5719:END:
5720
5721This script toggles between a 'normal' mode and a 'tablet' mode, doing
5722a few things:
5723
5724- rotates the screen using =xrandr=, so that rotating the physical
5725 display of my X220t would have the laptop's battery on the right
5726 hand side,
5727- enables touch screen,
5728- properly rotates the stylus pen and touch screen pointers, and
5729- toggles between RGB and Vertical BGR sub-pixel order.
5730
5731#+begin_src bash :tangle no
5732case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
5733 0) # Screen is not rotated, we should rotate it right (90°)
5734 xrandr -o 3
5735 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
5736 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
5737 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
5738 xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
5739 ;;
5740 1) # Currently top is rotated right, we should set it normal (0°)
5741 xrandr -o 0
5742 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
5743 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
5744 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
5745 xfconf-query -c xsettings -p /Xft/RGBA -s rgb
5746 ;;
5747 *)
5748 echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
5749 exit 1
5750 ;;
5751esac
5752#+end_src
5753
5754** unlock-def-gk.py
5755:PROPERTIES:
5756:header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
5757:END:
5758
5759#+begin_src python :tangle no
5760import gnomekeyring as gk
5761# list_item_ids_sync('login')[0] == 1L
5762gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
5763#+end_src
5764
5765** volume-info
5766:PROPERTIES:
5767:header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh"
5768:END:
5769
5770#+begin_src sh :tangle no
5771cur_vol=$(pamixer --get-volume)
5772
5773if [ $(pamixer --get-mute) = true ]; then
5774 printf 'mt \n' "$cur_vol"
5775else
5776 printf '%02d \n' "$cur_vol"
5777fi
5778#+end_src
5779
5780** wp
5781
5782My little wallpaper changer script.
5783
5784*** wp
5785:PROPERTIES:
5786:header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
5787:END:
5788
5789#+begin_src bash :tangle no
5790export DISPLAY=:0
5791
5792case "$1" in
5793 "day")
5794 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5795 ;;
5796 "night")
5797 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5798 ;;
5799 *)
5800 echo $"Usage: $0 {day|night}"
5801 exit 1
5802esac
5803#+end_src
5804
5805*** wp-auto
5806:PROPERTIES:
5807:header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
5808:END:
5809
5810#+begin_src bash :tangle no
5811SED=$(which sed)
5812ROFI=$(which rofi)
5813
5814export DISPLAY=:0
5815HOUR=$(date +%H)
5816
5817if [ -z "${SED}" ]
5818then
5819 echo "Did not find 'sed', script cannot continue."
5820 exit 1
5821fi
5822if [ -z "${ROFI}" ]
5823then
5824 echo "Did not find rofi, there is no point to continue."
5825 exit 1
5826fi
5827
5828###
5829# Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
5830# Repeated calls should leave the config clean-ish
5831###
5832function set_theme()
5833{
5834 CDIR="${HOME}/.config/rofi/"
5835 if [ ! -d "${CDIR}" ]
5836 then
5837 mkdir -p ${CDIR}
5838 fi
5839 if [ -f "${CDIR}/config" ]
5840 then
5841 ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
5842 fi
5843 echo "rofi.theme: ${1}" >> "${CDIR}/config"
5844
5845}
5846
5847if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
5848 then
5849 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5850 xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
5851 set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
5852 else
5853 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5854 xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
5855 set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
5856fi
5857#+end_src
5858
5859*** wp.service
5860:PROPERTIES:
5861:header-args+: :tangle ~/.config/systemd/user/wp.service
5862:END:
5863
5864#+begin_src conf :tangle no
5865[Unit]
5866Description=wallpaper service
5867
5868[Service]
5869Type=oneshot
5870ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
5871#+end_src
5872
5873*** wp.timer
5874:PROPERTIES:
5875:header-args+: :tangle ~/.config/systemd/user/wp.timer
5876:END:
5877
5878#+begin_src conf :tangle no
5879[Unit]
5880[Unit]
5881Description=wallpaper timer
5882
5883[Timer]
5884OnCalendar=07,21:00
5885Unit=wp.service
5886Persistent=true
5887
5888[Install]
5889WantedBy=timers.target
5890#+end_src
5891
5892** zathura-sync.sh
5893:PROPERTIES:
5894:header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
5895:END:
5896
5897#+begin_src sh
5898pos="$1"
5899pdffile="$2"
5900zathura --synctex-forward "$pos" "$pdffile" || \
5901 (
5902 zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
5903 sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
5904#+end_src
5905** Fun :)
5906
5907*** eat-em
5908:PROPERTIES:
5909:header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
5910:END:
5911
5912#+begin_src sh
5913# Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5914# [ESC] character in original post removed here.
5915
5916# ANSI Color -- use these variables to easily have different color
5917# and format output. Make sure to output the reset sequence after
5918# colors (f = foreground, b = background), and use the 'off'
5919# feature for anything you turn on.
5920
5921initializeANSI()
5922{
5923 esc="$(echo -en '\e')"
5924
5925 blackf="${esc}[30m"; redf="${esc}[31m"; greenf="${esc}[32m"
5926 yellowf="${esc}[33m" bluef="${esc}[34m"; purplef="${esc}[35m"
5927 cyanf="${esc}[36m"; whitef="${esc}[37m"
5928
5929 blackb="${esc}[40m"; redb="${esc}[41m"; greenb="${esc}[42m"
5930 yellowb="${esc}[43m" blueb="${esc}[44m"; purpleb="${esc}[45m"
5931 cyanb="${esc}[46m"; whiteb="${esc}[47m"
5932
5933 boldon="${esc}[1m"; boldoff="${esc}[22m"
5934 italicson="${esc}[3m"; italicsoff="${esc}[23m"
5935 ulon="${esc}[4m"; uloff="${esc}[24m"
5936 invon="${esc}[7m"; invoff="${esc}[27m"
5937
5938 reset="${esc}[0m"
5939}
5940
5941# note in this first use that switching colors doesn't require a reset
5942# first - the new color overrides the old one.
5943
5944#clear
5945
5946initializeANSI
5947
5948cat << EOF
5949
5950 ${yellowf} ▄███████▄${reset} ${redf} ▄██████▄${reset} ${greenf} ▄██████▄${reset} ${bluef} ▄██████▄${reset} ${purplef} ▄██████▄${reset} ${cyanf} ▄██████▄${reset}
5951 ${yellowf}▄█████████▀▀${reset} ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset} ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset} ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset} ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset} ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5952 ${yellowf}███████▀${reset} ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset} ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset} ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset} ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset} ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5953 ${yellowf}███████▄${reset} ${redf}████████████${reset} ${greenf}████████████${reset} ${bluef}████████████${reset} ${purplef}████████████${reset} ${cyanf}████████████${reset}
5954 ${yellowf}▀█████████▄▄${reset} ${redf}██▀██▀▀██▀██${reset} ${greenf}██▀██▀▀██▀██${reset} ${bluef}██▀██▀▀██▀██${reset} ${purplef}██▀██▀▀██▀██${reset} ${cyanf}██▀██▀▀██▀██${reset}
5955 ${yellowf} ▀███████▀${reset} ${redf}▀ ▀ ▀ ▀${reset} ${greenf}▀ ▀ ▀ ▀${reset} ${bluef}▀ ▀ ▀ ▀${reset} ${purplef}▀ ▀ ▀ ▀${reset} ${cyanf}▀ ▀ ▀ ▀${reset}
5956
5957 ${boldon}${yellowf} ▄███████▄ ${redf} ▄██████▄ ${greenf} ▄██████▄ ${bluef} ▄██████▄ ${purplef} ▄██████▄ ${cyanf} ▄██████▄${reset}
5958 ${boldon}${yellowf}▄█████████▀▀ ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄ ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄ ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄ ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄ ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5959 ${boldon}${yellowf}███████▀ ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███ ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███ ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███ ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███ ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5960 ${boldon}${yellowf}███████▄ ${redf}████████████ ${greenf}████████████ ${bluef}████████████ ${purplef}████████████ ${cyanf}████████████${reset}
5961 ${boldon}${yellowf}▀█████████▄▄ ${redf}██▀██▀▀██▀██ ${greenf}██▀██▀▀██▀██ ${bluef}██▀██▀▀██▀██ ${purplef}██▀██▀▀██▀██ ${cyanf}██▀██▀▀██▀██${reset}
5962 ${boldon}${yellowf} ▀███████▀ ${redf}▀ ▀ ▀ ▀ ${greenf}▀ ▀ ▀ ▀ ${bluef}▀ ▀ ▀ ▀ ${purplef}▀ ▀ ▀ ▀ ${cyanf}▀ ▀ ▀ ▀${reset}
5963
5964EOF
5965#+end_src
5966
5967*** invade-em
5968:PROPERTIES:
5969:header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
5970:END:
5971
5972#+begin_src bash
5973#
5974# ANSI color scheme script featuring Space Invaders
5975#
5976# Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5977# Modified by lolilolicon
5978#
5979
5980f=3 b=4
5981for j in f b; do
5982 for i in {0..7}; do
5983 printf -v $j$i %b "\e[${!j}${i}m"
5984 done
5985done
5986bld=$'\e[1m'
5987rst=$'\e[0m'
5988
5989cat << EOF
5990
5991 $f1 ▀▄ ▄▀ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4 ▀▄ ▄▀ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
5992 $f1 ▄█▀███▀█▄ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4 ▄█▀███▀█▄ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
5993 $f1█▀███████▀█ $f2▀▀███▀▀███▀▀ $f3▀█▀██▀█▀ $f4█▀███████▀█ $f5▀▀███▀▀███▀▀ $f6▀█▀██▀█▀$rst
5994 $f1▀ ▀▄▄ ▄▄▀ ▀ $f2 ▀█▄ ▀▀ ▄█▀ $f3▀▄ ▄▀ $f4▀ ▀▄▄ ▄▄▀ ▀ $f5 ▀█▄ ▀▀ ▄█▀ $f6▀▄ ▄▀$rst
5995
5996 $bld$f1▄ ▀▄ ▄▀ ▄ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4▄ ▀▄ ▄▀ ▄ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
5997 $bld$f1█▄█▀███▀█▄█ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4█▄█▀███▀█▄█ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
5998 $bld$f1▀█████████▀ $f2▀▀▀██▀▀██▀▀▀ $f3▀▀█▀▀█▀▀ $f4▀█████████▀ $f5▀▀▀██▀▀██▀▀▀ $f6▀▀█▀▀█▀▀$rst
5999 $bld$f1 ▄▀ ▀▄ $f2▄▄▀▀ ▀▀ ▀▀▄▄ $f3▄▀▄▀▀▄▀▄ $f4 ▄▀ ▀▄ $f5▄▄▀▀ ▀▀ ▀▀▄▄ $f6▄▀▄▀▀▄▀▄$rst
6000
6001
6002 $f7▌$rst
6003
6004 $f7▌$rst
6005
6006 $f7 ▄█▄ $rst
6007 $f7▄█████████▄$rst
6008 $f7▀▀▀▀▀▀▀▀▀▀▀$rst
6009
6010EOF
6011#+end_src