02a9b196582855d784b88ea66489ab35c5bbc39a
[~bandali/configs] / rc.org
1 #+title: rc.org
2 #+property: header-args :comments link :mkdirp yes :results silent
3
4 * About
5
6 This org file contains the configuration files of pretty much every
7 program I use. The files are tangled (i.e. exported, or derived) from
8 this file using =org-babel=.
9
10 Note: This file is best viewed inside Emacs with org mode.
11
12 * Configs
13
14 This section contains the configuration files (dotfiles) of various
15 programs I use.
16
17 ** bspwm
18
19 *** bspwmrc
20 :PROPERTIES:
21 :header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
22 :END:
23
24 #+begin_src sh :tangle no
25 sxhkd &
26 sh ~/.fehbg &
27 xfce4-panel -d &
28 compton &
29 sleep 0.5 && pasystray --notify=all &
30
31 bspc monitor -d I II III IV V VI VII VIII IX X
32 #bspc monitor eDP-1 -d I II III IV V
33 #bspc monitor HDMI-1 -d VI VII VIII IX X
34
35 #bspc config border_width 2
36 #bspc config window_gap 8
37 bspc config window_gap 0
38
39 bspc config bottom_padding 26
40
41 bspc config split_ratio 0.52
42 bspc config borderless_monocle true
43 bspc config gapless_monocle true
44 bspc config click_to_focus button1
45 bspc config directional_focus_tightness low
46
47 #bspc rule -a Firefox desktop='^1' follow=on
48 bspc rule -a Nightly desktop='^1' follow=on
49 bspc rule -a Emacs desktop='^2' state=tiled follow=on
50 #bspc rule -a Chromium desktop='^4' follow=on
51 bspc rule -a URxvt state=floating
52 bspc rule -a URxvt:tiled state=tiled
53 bspc rule -a Connman-gtk state=floating
54 bspc rule -a Xfce4-panel state=floating
55 bspc rule -a TelegramDesktop state=floating
56 bspc rule -a Ec state=floating
57 bspc rule -a Pavucontrol state=floating
58 bspc rule -a Eog state=floating
59 bspc rule -a Seahorse state=floating
60 bspc rule -a mpv state=floating
61 bspc rule -a Evince state=floating
62 bspc rule -a Meld state=floating
63 bspc rule -a Autokey-gtk state=floating
64 bspc rule -a Mousepad state=floating
65 bspc rule -a Wrapper-1.0 state=floating
66 bspc rule -a File-roller state=floating
67 bspc rule -a Gnome-disks state=floating
68 bspc rule -a Termite state=floating
69 bspc rule -a Termite:tiled state=tiled
70 bspc rule -a Thunderbird:Calendar state=floating
71 bspc rule -a Audacity state=floating
72 bspc rule -a Proof state=floating # pvs x-show-proof
73 bspc rule -a Nm-connection-editor state=floating
74 bspc rule -a Wire state=floating
75 bspc rule -a discord state=floating
76 bspc rule -a X2goclient state=floating
77 bspc rule -a SimpleScreenRecorder state=floating
78 bspc rule -a Gimp state=floating
79 bspc rule -a Wrapper-2.0 state=floating
80 bspc rule -a Zathura state=tiled
81 #+end_src
82
83 *** sxhkdrc
84 :PROPERTIES:
85 :header-args+: :tangle ~/.config/sxhkd/sxhkdrc
86 :END:
87
88 #+begin_src conf :tangle no
89 #
90 # wm independent hotkeys
91 #
92
93 # terminal emulator
94 super + {_,shift} + Return
95 urxvt{_, -name tiled}
96
97 #super + {_,shift} + Return
98 # termite{_, --name=tiled}
99
100 # program launcher
101 super + space
102 rofi -show run -display-run '> ' -display-window ' 🗔 '
103
104 super + alt + space
105 xfce4-popup-whiskermenu
106
107 # window finder
108 super + backslash
109 rofi -show window -display-run '> ' -display-window ' 🗔 '
110
111 # password manager
112 alt + space
113 rofi-pass
114
115 # firefox
116 #super + r
117 # firefox
118
119 # chromium
120 #super + c
121 # chromium -incognito
122
123 # emacs
124 super + e
125 emacs
126
127 # make sxhkd reload its configuration files:
128 super + Escape
129 pkill -USR1 -x sxhkd
130
131 # volume {up,down}
132 XF86Audio{Raise,Lower}Volume
133 pamixer --allow-boost --{in,de}crease 5
134
135 # mute
136 XF86AudioMute
137 pamixer --toggle-mute
138
139 XF86AudioMicMute
140 pactl set-source-mute 1 toggle
141
142 # playback control
143 XF86Audio{Play,Prev,Next}
144 mpc {toggle,prev,next}
145
146 # lock the screen
147 super + shift + q
148 light-locker-command -l
149
150 # Toggle keyboard layout
151 super + F7
152 toggle-layout
153
154 # Toggle Xfce presentation mode
155 XF86LaunchB
156 toggle-presentation-mode
157
158 # monitor brightness
159 XF86MonBrightness{Up,Down}
160 light -{A,U} 5
161
162 super + apostrophe
163 rofi-light
164
165 # keyboard brightness
166 #XF86KbdBrightness{Up,Down}
167 # kbdlight {up,down}
168
169 XF86RotateWindows
170 toggle-tablet
171
172 #
173 # bspwm hotkeys
174 #
175
176 # quit bspwm normally
177 super + alt + Escape
178 bspc quit
179
180 # close and kill
181 super + {w,q}
182 bspc node -{c,k}
183
184 # alternate between the tiled and monocle layout
185 super + m
186 bspc desktop -l next
187
188 # send the newest marked node to the newest preselected node
189 super + y
190 bspc node newest.marked.local -n newest.!automatic.local
191
192 # swap the current node and the biggest node
193 super + g
194 bspc node -s biggest
195
196 #
197 # state/flags
198 #
199
200 # set the window state
201 super + {t,shift + t,s,f}
202 bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
203
204 # set the node flags
205 super + ctrl + {m,x,y,z}
206 bspc node -g {marked,locked,sticky,private}
207
208 #
209 # focus/swap
210 #
211
212 # focus the node in the given direction
213 super + {_,shift + }{h,j,k,l}
214 bspc node -{f,s} {west,south,north,east}
215
216 # focus the node for the given path jump
217 super + {p,b,comma,period}
218 bspc node -f @{parent,brother,first,second}
219
220 # focus the next/previous node in the current desktop
221 super + {_,shift + }c
222 bspc node -f {next,prev}.local
223
224 # focus the next/previous desktop in the current monitor
225 super + bracket{left,right}
226 bspc desktop -f {prev,next}.local
227
228 # send to next/prev desktop
229 super + shift + bracket{left,right}
230 bspc node -d {prev,next} --follow
231
232 # focus the last node/desktop
233 super + {grave,Tab}
234 bspc {node,desktop} -f last
235
236 # focus the older or newer node in the focus history
237 super + {o,i}
238 bspc wm -h off; \
239 bspc node {older,newer} -f; \
240 bspc wm -h on
241
242 # focus or send to the given desktop
243 super + {_,shift + }{1-9,0}
244 bspc {desktop -f,node -d} '^{1-9,10}'
245
246 #
247 # preselect
248 #
249
250 # preselect the direction
251 super + ctrl + {h,j,k,l}
252 bspc node -p {west,south,north,east}
253
254 # preselect the ratio
255 super + ctrl + {1-9}
256 bspc node -o 0.{1-9}
257
258 # cancel the preselection for the focused node
259 super + ctrl + space
260 bspc node -p cancel
261
262 # cancel the preselection for the focused desktop
263 super + ctrl + shift + space
264 bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
265
266 #
267 # move/resize
268 #
269
270 # expand a window by moving one of its side outward
271 super + alt + {h,j,k,l}
272 bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
273
274 # contract a window by moving one of its side inward
275 super + alt + shift + {h,j,k,l}
276 bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
277
278 # move a floating window
279 super + {Left,Down,Up,Right}
280 bspc node -v {-20 0,0 20,0 -20,20 0}
281
282 #alt + bracket{left,right}
283 # xdotool key --clearmodifiers ctrl+Page_{Up,Down}
284 #+end_src
285
286 ** compton
287 :PROPERTIES:
288 :header-args+: :tangle ~/.config/compton.conf
289 :END:
290
291 #+begin_src conf :tangle no
292 # Shadow
293 shadow = false; # Enabled client-side shadows on windows.
294 no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows.
295 no-dnd-shadow = true; # Don't draw shadows on DND windows.
296 clear-shadow = true; # Zero the part of the shadow's mask behind the
297 # window. Fix some weirdness with ARGB windows.
298 shadow-radius = 5; # The blur radius for shadows. (default 12)
299 shadow-offset-x = -5; # The left offset for shadows. (default -15)
300 shadow-offset-y = -5; # The top offset for shadows. (default -15)
301 # shadow-opacity = 0.7; # The translucency for shadows. (default .75)
302 # shadow-red = 0.0; # Red color value of shadow. (0.0 - 1.0, defaults to 0)
303 # shadow-green = 0.0; # Green color value of shadow. (0.0 - 1.0, defaults to 0)
304 # shadow-blue = 0.0; # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
305 shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ]; # Exclude conditions for shadows.
306 # shadow-exclude = "n:e:Notification";
307 #shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
308 shadow-ignore-shaped = true; # Avoid drawing shadow on all shaped windows
309 # (see also: --detect-rounded-corners)
310
311 # Opacity
312 menu-opacity = 1.0; # The opacity for menus. (default 1.0)
313 #inactive-opacity = 0.9; # Default opacity of inactive windows. (0.0 - 1.0)
314 # active-opacity = 0.8; # Default opacity for active windows. (0.0 - 1.0)
315 frame-opacity = 1.0; # Opacity of window titlebars and borders. (0.1 - 1.0)
316 # inactive-opacity-override = true; # Let inactive opacity set by 'inactive-opacity' overrides
317 # value of _NET_WM_OPACITY. Bad choice.
318 alpha-step = 0.06; # XRender backend: Step size for alpha pictures. Increasing
319 # it may result in less X resource usage,
320 # Yet fading may look bad.
321 #inactive-dim = 0.5; # Dim inactive windows. (0.0 - 1.0)
322 #inactive-dim-fixed = true; # Do not let dimness adjust based on window opacity.
323 # blur-background = true; # Blur background of transparent windows.
324 # Bad performance with X Render backend.
325 # GLX backend is preferred.
326 # blur-background-frame = true; # Blur background of opaque windows with transparent
327 # frames as well.
328 blur-background-fixed = true; # Do not let blur radius adjust based on window opacity.
329 blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
330 # Exclude conditions for background blur.
331
332 # Fading
333 fading = false; # Fade windows during opacity changes.
334 fade-delta = 3; # The time between steps in a fade in milliseconds. (default 10).
335 fade-in-step = 0.03; # Opacity change between steps while fading in. (default 0.028).
336 fade-out-step = 0.03; # Opacity change between steps while fading out. (default 0.03).
337 # no-fading-openclose = true; # Avoid fade windows in/out when opening/closing.
338 fade-exclude = [ ]; # Exclude conditions for fading.
339
340 # Other
341 backend = "glx" # Backend to use: "xrender" or "glx". GLX backend is typically
342 # much faster but depends on a sane driver.
343 mark-wmwin-focused = true; # Try to detect WM windows and mark them as active.
344 mark-ovredir-focused = true; # Mark all non-WM but override-redirect windows active (e.g. menus).
345 use-ewmh-active-win = true; # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
346 # instead of using FocusIn/Out events. Usually more reliable but
347 # depends on a EWMH-compliant WM.
348 detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
349 detect-client-opacity = true; # Detect _NET_WM_OPACITY on client windows, useful for window
350 # managers not passing _NET_WM_OPACITY of client windows to frame
351 # windows.
352 refresh-rate = 0; # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
353 vsync = "drm"; # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
354 # See man page for more details.
355 dbe = false; # Enable DBE painting mode. Rarely needed.
356 paint-on-overlay = true; # Painting on X Composite overlay window. Recommended.
357 sw-opti = false; # Limit compton to repaint at most once every 1 / refresh_rate.
358 # Incompatible with certain VSync methods.
359 unredir-if-possible = false; # Unredirect all windows if a full-screen opaque window is
360 # detected, to maximize performance for full-screen windows.
361 focus-exclude = [ ]; # A list of conditions of windows that should always be considered
362 # focused.
363 detect-transient = true; # Use WM_TRANSIENT_FOR to group windows, and consider windows in
364 # the same group focused at the same time.
365 detect-client-leader = true; # Use WM_CLIENT_LEADER to group windows.
366 invert-color-include = [ ]; # Conditions for windows to be painted with inverted color.
367
368 # GLX backend # GLX backend fine-tune options. See man page for more info.
369 glx-no-stencil = true; # Recommended.
370 glx-copy-from-front = false; # Useful with --glx-swap-method,
371 # glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
372 # glx-no-rebind-pixmap = true; # Recommended if it works.
373 glx-no-rebind-pixmap = true; # Recommended if it works.
374 #glx-swap-method = "4"; # See man page.
375 glx-swap-method = "4"; # See man page.
376
377 # Window type settings
378 wintypes:
379 {
380 tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
381 menu = { shadow = false; };
382 dropdown_menu = { shadow = false; };
383 popup_menu = { shadow = false; };
384 utility = { shadow = false; };
385 # fade: Fade the particular type of windows.
386 # shadow: Give those windows shadow
387 # opacity: Default opacity for the type of windows.
388 # focus: Whether to always consider windows of this type focused.
389 };
390 #+end_src
391
392 ** Dunst
393 :PROPERTIES:
394 :header-args+: :tangle ~/.config/dunst/dunstrc
395 :END:
396
397 #+begin_src conf
398 [global]
399 #font = Ubuntu Mono 10.5
400 font = Inconsolata 11
401
402 # Path to default icons.
403 icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
404
405 icon_position = left
406 # <b>bold</b>
407 # <i>italic</i>
408 # <s>strikethrough<s/>
409 # <u>underline</u>
410 markup = full
411 # The format of the message. Possible variables are:
412 # %a appname
413 # %s summary
414 # %b body
415 # %i iconname (including its path)
416 # %I iconname (without its path)
417 # %p progress value if set ([ 0%] to [100%]) or nothing
418 # Markup is allowed
419 format = "<b>%s</b>\n%b"
420 # Sort messages by urgency
421 sort = yes
422 # Show how many messages are currently hidden (because of geometry)
423 indicate_hiddenl= no
424 # Alignment of message text.
425 # Possible values are "left", "center" and "right"
426 alignment = center
427 # The frequency with wich text that is longer than the notification
428 # window allows bounces back and forth.
429 # This option conflicts with 'word_wrap'.
430 # Set to 0 to disable
431 bounce_freq = 3
432 # show age of message if message is older than show_age_threshold seconds.
433 # set to -1 to disable
434 show_age_threshold = -1
435 # split notifications into multiple lines if they don't fit into geometry
436 word_wrap = yes
437 # ignore newlines '\n' in notifications
438 ignore_newline = no
439 # The geometry of the message window.
440 # geometry [{width}]x{height}][+/-{x}+/-{y}]
441 # The height is measured in number of notifications everything else in pixels. If the width
442 # is omitted but the height is given ("-geometry x2"), the message window
443 # expands over the whole screen (dmenu-like). If width is 0,
444 # the window expands to the longest message displayed.
445 # A positive x is measured from the left, a negative from the
446 # right side of the screen. Y is measured from the top and down respectevly.
447 # The width can be negative. In this case the actual width is the
448 # screen width minus the width defined in within the geometry option.
449 #geometry = "410x12-12+12"
450 #geometry = "0x0-30-30"
451 geometry = "260x12-30-30"
452 # The transparency of the window. range: [0; 100]
453 # This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
454 transparency = 0
455 # Don't remove messages, if the user is idle (no mouse or keyboard input)
456 # for longer than idle_threshold seconds.
457 # Set to 0 to disable.
458 idle_threshold = 120
459 # Which monitor should the notifications be displayed on.
460 monitor = 0
461 # Display notification on focused monitor. Possible modes are:
462 # mouse: follow mouse pointer
463 # keyboard: follow window with keyboard focus
464 # none: don't follow anything
465 #
466 # "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
467 # This should be the case for almost all modern windowmanagers.
468 #
469 # If this option is set to mouse or keyboard, the monitor option will be
470 # ignored.
471 follow = keyboard
472 # should a notification popped up from history be sticky or
473 # timeout as if it would normally do.
474 sticky_history = yes
475 # The height of a single line. If the height is smaller than the font height,
476 # it will get raised to the font height.
477 # This adds empty space above and under the text.
478 line_height = 0
479
480 show_indicators = yes
481
482 # Draw a line of 'separatpr_height' pixel height between two notifications.
483 # Set to 0 to disable
484 separator_height = 3
485 # padding between text and separator
486 padding = 8
487 # horizontal padding
488 horizontal_padding = 8
489 # Define a color for the separator.
490 # possible values are:
491 # * auto: dunst tries to find a color fitting to the background
492 # * foreground: use the same color as the foreground
493 # * frame: use the same color as the frame.
494 # * anything else will be interpreted as a X color
495 separator_color = foreground
496 # print a notification on startup
497 # This is mainly for error detection, since dbus (re-)starts dunst
498 # automatically after a crash.
499 startup_notification = false
500 # dmenu path
501 #dmenu = /usr/bin/dmenu -p dunst:
502 dmenu = /usr/bin/rofi -dmenu -p dunst:
503 # browser for opening urls in context menu
504 browser = /usr/bin/firefox -new-tab
505 [frame]
506 width = 0
507 color = "#377222"
508 [shortcuts]
509 # shortcuts are specified as [modifier+][modifier+]...key
510 # available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
511 # and 'mod4' (windows-key)
512 # xev might be helpful to find names for keys
513 # close notification
514 close = ctrl+space
515 # close all notifications
516 close_all = ctrl+shift+space
517 # redisplay last message(s)
518 # On the US keyboard layout 'grave' is normally above TAB and left of '1'.
519 history = ctrl+shift+h
520 # context menu
521 context = ctrl+shift+period
522 [urgency_low]
523 # IMPORTANT: colors have to be defined in quotation marks.
524 # Otherwise the '#' and following would be interpreted as a comment.
525 background = "#1d2a30"
526 foreground = "#71c2af"
527 timeout = 3
528 [urgency_normal]
529 background = "#1d2a30"
530 foreground = "#71c2af"
531 timeout = 0
532 [urgency_critical]
533 background = "#1d2a30"
534 foreground = "#ff9982"
535 timeout = 0
536
537 # Every section that isn't one of the above is interpreted as a rules
538 # to override settings for certain messages.
539 # Messages can be matched by 'appname', 'summary', 'body' or 'icon'
540 # and you can override the 'timeout', 'urgency', 'foreground', 'background'
541 # and 'format'.
542 # Shell-like globbing will get expanded.
543 #
544 # SCRIPTING
545 # you can specify a script that gets run when the rule matches by setting
546 # the 'script' option.
547 # The script will be called as follows:
548 # script appname summary body icon urgency
549 # where urgency can be "LOW", "NORMAL" or "CRITICAL".
550 #
551 # NOTE: if you don't want a notification to be displayed, set the format to ""
552 # NOTE: It might be helpful to run dunst -print in a terminal in order to find
553 # fitting options for rules.
554 #[espeak]
555 # summary = "*"
556 # script = dunst_espeak.sh
557 #[script-test]
558 # summary = "*script*"
559 # script = dunst_test.sh
560 #[ignore]
561 ## This notification will not be displayed
562 # summary = "foobar"
563 # format = ""
564 #[signed_on]
565 # appname = Pidgin
566 # summary = "*signed on*"
567 # urgency = low
568 #
569 #[signed_off]
570 # appname = Pidgin
571 # summary = *signed off*
572 # urgency = low
573 #
574 #[says]
575 # appname = Pidgin
576 # summary = *says*
577 # urgency = critical
578 #
579 #[twitter]
580 # appname = Pidgin
581 # summary = *twitter.com*
582 # urgency = normal
583 #
584 [xfpm-backlight]
585 summary = *Brightness*
586 urgency = low
587 #+end_src
588
589 ** Fontconfig
590 :PROPERTIES:
591 :header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
592 :END:
593
594 #+begin_src xml
595 <?xml version="1.0"?>
596 <!DOCTYPE fontconfig SYSTEM "fonts.dtd">
597 <fontconfig>
598 <match target="font">
599 <edit mode="assign" name="rgba">
600 <const>rgb</const>
601 </edit>
602 </match>
603 <match target="font">
604 <edit mode="assign" name="hinting">
605 <bool>true</bool>
606 </edit>
607 </match>
608 <match target="font">
609 <edit mode="assign" name="hintstyle">
610 <const>hintslight</const>
611 </edit>
612 </match>
613 <match target="font">
614 <edit mode="assign" name="antialias">
615 <bool>true</bool>
616 </edit>
617 </match>
618 <match target="font">
619 <edit mode="assign" name="lcdfilter">
620 <const>lcddefault</const>
621 </edit>
622 </match>
623 <dir>~/.fonts</dir>
624
625 <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
626 <alias binding="same">
627 <family>Helvetica</family>
628 <accept>
629 <family>Liberation Sans</family>
630 </accept>
631 </alias>
632 </fontconfig>
633 #+end_src
634
635 ** Git
636
637 *** gitconfig
638 :PROPERTIES:
639 :header-args+: :tangle ~/.gitconfig
640 :END:
641
642 **** user
643 #+begin_src conf
644 [user]
645 name = Amin Bandali
646 email = mab@gnu.org
647 signingkey = 4E05246AB0BF7FFB
648 #+end_src
649
650 **** signing
651 #+begin_src conf
652 [commit]
653 gpgsign = true
654 # [format]
655 # signoff = true
656 #+end_src
657
658 **** core
659 #+begin_src conf
660 [core]
661 autocrlf = input # CRLF -> LF on commit
662 editor = emacsclient -t
663 excludesfile = ~/.gitignore_global
664 pager = "less"
665 #+end_src
666
667 **** gpg
668 #+begin_src conf
669 [gpg]
670 program = gpg2
671 #+end_src
672
673 **** alias
674 #+begin_src conf
675 [alias]
676 git = !exec git # handle nested git calls, e.g. git git status
677 aliases = config --get-regexp '^alias\\.'
678 a = add
679 s = status
680 sl = status --long
681 c = checkout
682 cb = checkout -b
683 b = branch
684 r = rebase
685 p = pull
686 pr = pull --rebase
687 ps = push
688 psf = push --force
689 nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f"
690 nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f"
691 #+end_src
692
693 **** color
694 #+begin_src conf
695 [color]
696 ui = auto
697 [color "status"]
698 added = green bold
699 changed = red bold
700 untracked = red bold
701 [color "branch"]
702 current = green bold
703 remote = magenta bold
704 [color "diff"]
705 new = green bold
706 old = red bold
707 #+end_src
708
709 **** status
710 #+begin_src conf
711 [status]
712 # showUntrackedFiles = all
713 short=true
714 branch=true
715 #+end_src
716
717 **** github
718 #+begin_src conf
719 [github]
720 user = aminb
721 #+end_src
722
723 **** send-email
724 #+begin_src conf
725 [sendemail]
726 smtpuser = aminb
727 smtpserver = fencepost.gnu.org
728 smtpserverport = 587
729 smtpencryption = tls
730 annotate = yes
731 #+end_src
732
733 *** gitignore
734 :PROPERTIES:
735 :header-args+: :tangle ~/.gitignore_global
736 :END:
737
738 #+begin_src conf
739 *.orig
740 *.py[co]
741 *.sublime-workspace
742 *~
743 .DS_Store
744 *.elc
745 *-autoloads.el
746 #+end_src
747
748 ** [[https://github.com/Leinnan/i3gs][i3gs]]
749 :PROPERTIES:
750 :header-args+: :tangle ~/.config/i3gs/config
751 :END:
752
753 #+begin_src conf :comments none
754 borders_width=0 0 2 0
755 separator_width=10
756
757 #[mpd]
758 #preset=MPD
759 #title=<span weight='heavy' fgcolor='#7FDBFF'> </span>
760 #borders_color=#7FDBFF
761
762 [ram]
763 preset=RAM
764 title=<span weight='heavy' fgcolor='#3D9970'> </span>
765 borders_color=#3D9970
766
767 #[cpu]
768 #preset=CPU
769 #title=<span weight='heavy' fgcolor='#2ECC40'> </span>
770 #borders_color=#2ECC40
771
772 #[hdd]
773 #preset=HDD
774 #title=<span weight='heavy' fgcolor='#01FF70'> </span>
775 #borders_color=#01FF70
776
777 [volume]
778 command=volume-info
779 title=<span weight='heavy' fgcolor='#7FDBFF'></span>
780 borders_color=#7FDBFF
781
782 [battery]
783 preset=BAT
784 command=battery-percentage-time
785 title=<span weight='heavy' fgcolor='#39CCCC'> </span>
786 borders_color=#39CCCC
787
788 [wifi]
789 preset=WIFI
790 title=<span weight='heavy' fgcolor='#01FF70'> </span>
791 borders_color=#01FF70
792
793 [date]
794 preset=DATE
795 command=date '+%-I:%M, %a %b %d '
796 title=<span weight='heavy' fgcolor='#FFDC00'> </span>
797 borders_color=#FFDC00
798 separator_width=0
799 #+end_src
800 ** Latexmk
801 :PROPERTIES:
802 :header-args+: :tangle ~/.latexmkrc
803 :END:
804
805 #+begin_src conf
806 $pdf_previewer = "start zathura %O %S";
807 $clean_ext = "aux out";
808
809 # $pdf_update_method = 4;
810 # $pdf_update_command = "zathura %O %S";
811
812 # Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
813 # by Ctrl+click in the PDF.
814 # Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
815 # editor.
816 # $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
817 #+end_src
818
819 ** libinput
820
821 Improve XPS 15 9560's touchpad experience.
822
823 # begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
824 #+begin_src conf :tangle no
825 Section "InputClass"
826 Identifier "libinput touchpad catchall"
827 Driver "libinput"
828 MatchIsTouchpad "on"
829 Option "ClickMethod" "clickfinger"
830 Option "NaturalScrolling" "true"
831 Option "Tapping" "on"
832 Option "TappingButtonMap" "lrm"
833 EndSection
834 #+end_src
835
836 ** getmail
837
838 *** getmailrc
839 :PROPERTIES:
840 :header-args+: :tangle ~/.getmail/getmailrc
841 :END:
842
843 #+begin_src conf
844 [retriever]
845 type = SimplePOP3SSLRetriever
846 server = fencepost.gnu.org
847 username = aminb
848 password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
849 port = 995
850 use_apop = True
851
852 [destination]
853 type = Maildir
854 path = ~/mail/gnu/Inbox/
855
856 [options]
857 delete = True
858 #+end_src
859
860 *** getmail.service
861 :PROPERTIES:
862 :header-args+: :tangle ~/.config/systemd/user/getmail.service
863 :END:
864
865 #+begin_src conf :tangle no
866 [Unit]
867 Description=getmail service
868
869 [Service]
870 Type=oneshot
871 ExecStart=/usr/bin/getmail
872 StandardOutput=syslog
873 StandardError=syslog
874 #+end_src
875
876 *** getmail.timer
877 :PROPERTIES:
878 :header-args+: :tangle ~/.config/systemd/user/getmail.timer
879 :END:
880
881 #+begin_src conf :tangle no
882 [Unit]
883 Description=getmail timer
884
885 [Timer]
886 OnCalendar=*:0/30
887 Persistent=true
888 Unit=getmail.service
889
890 [Install]
891 WantedBy=timers.target
892 #+end_src
893
894 ** GnuPG
895 :PROPERTIES:
896 :header-args+: :tangle ~/.gnupg/gpg-agent.conf
897 :END:
898
899 #+begin_src conf
900 default-cache-ttl 43200
901 max-cache-ttl 43200
902
903 default-cache-ttl-ssh 10800
904 max-cache-ttl-ssh 10800
905
906 # pinentry-program /usr/bin/pinentry-qt
907 #+end_src
908
909 ** GTK
910
911 *** gtk-2.0
912 :PROPERTIES:
913 :header-args+: :tangle ~/.gtkrc-2.0
914 :END:
915
916 #+begin_src conf
917 gtk-theme-name="Greybird"
918 gtk-icon-theme-name="Paper"
919 gtk-font-name="Ubuntu 10"
920 gtk-menu-images=0
921 # gtk-key-theme-name = "Emacs"
922 #+end_src
923
924 *** gtk-3.0
925 :PROPERTIES:
926 :header-args+: :tangle ~/.config/gtk-3.0/settings.ini
927 :END:
928
929 #+begin_src conf :tangle no
930 [Settings]
931 gtk-icon-theme-name = Paper
932 # gtk-theme-name = Adwaita
933
934 gtk-theme-name = Greybird
935 # gtk-theme-name = Arc-Darker
936 # gtk-theme-name = Numix-ArchBlue
937
938 gtk-font-name = Ubuntu 10
939 # gtk-key-theme-name = Emacs
940 #+end_src
941
942 ** isync
943
944 *** mbsyncrc
945 :PROPERTIES:
946 :header-args+: :tangle ~/.mbsyncrc
947 :END:
948
949 #+begin_src conf
950 # Global defaults
951 CopyArrivalDate yes
952
953 ######
954 IMAPAccount amin
955 Host nix.aminb.org
956 User amin@aminb.org
957 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
958 SSLType IMAPS
959
960 IMAPStore amin-remote
961 Account amin
962
963 MaildirStore amin-local
964 Path ~/mail/amin/
965 Inbox ~/mail/amin/Inbox
966 SubFolders Verbatim
967
968 Channel amin
969 Master :amin-remote:
970 Slave :amin-local:
971 Patterns * !dovecot*
972 Create Both
973 SyncState *
974
975 ######
976 IMAPAccount uwaterloo
977 Host connect.uwaterloo.ca
978 User abandali
979 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
980 SSLType IMAPS
981
982 IMAPStore uwaterloo-remote
983 Account uwaterloo
984
985 MaildirStore uwaterloo-local
986 Path ~/mail/uwaterloo/
987 Inbox ~/mail/uwaterloo/Inbox
988 SubFolders Verbatim
989
990 Channel uwaterloo
991 Master :uwaterloo-remote:
992 Slave :uwaterloo-local:
993 Patterns * !dovecot*
994 Create Both
995 SyncState *
996 #+end_src
997
998 *** mbsync.service
999 :PROPERTIES:
1000 :header-args+: :tangle ~/.config/systemd/user/mbsync.service
1001 :END:
1002
1003 #+begin_src conf :tangle no
1004 [Unit]
1005 Description=mbsync service
1006
1007 [Service]
1008 Type=oneshot
1009 ExecStart=/usr/bin/mbsync -Va
1010 StandardOutput=syslog
1011 StandardError=syslog
1012 #+end_src
1013
1014 *** mbsync.timer
1015 :PROPERTIES:
1016 :header-args+: :tangle ~/.config/systemd/user/mbsync.timer
1017 :END:
1018
1019 #+begin_src conf :tangle no
1020 [Unit]
1021 Description=mbsync timer
1022
1023 [Timer]
1024 OnCalendar=*:0/15
1025 Persistent=true
1026 Unit=mbsync.service
1027
1028 [Install]
1029 WantedBy=timers.target
1030 #+end_src
1031
1032 ** mpd
1033 :PROPERTIES:
1034 :header-args+: :tangle ~/.config/mpd/mpd.conf
1035 :END:
1036
1037 #+begin_src conf
1038 # An example configuration file for MPD.
1039 # Read the user manual for documentation: http://www.musicpd.org/doc/user/
1040
1041
1042 # Files and directories #######################################################
1043 #
1044 # This setting controls the top directory which MPD will search to discover the
1045 # available audio files and add them to the daemon's online database. This
1046 # setting defaults to the XDG directory, otherwise the music directory will be
1047 # be disabled and audio files will only be accepted over ipc socket (using
1048 # file:// protocol) or streaming files over an accepted protocol.
1049 #
1050 music_directory "~/usr/music"
1051 #
1052 # This setting sets the MPD internal playlist directory. The purpose of this
1053 # directory is storage for playlists created by MPD. The server will use
1054 # playlist files not created by the server but only if they are in the MPD
1055 # format. This setting defaults to playlist saving being disabled.
1056 #
1057 playlist_directory "~/.mpd/playlists"
1058 #
1059 # This setting sets the location of the MPD database. This file is used to
1060 # load the database at server start up and store the database while the
1061 # server is not up. This setting defaults to disabled which will allow
1062 # MPD to accept files over ipc socket (using file:// protocol) or streaming
1063 # files over an accepted protocol.
1064 #
1065 db_file "~/.mpd/database"
1066 #
1067 # These settings are the locations for the daemon log files for the daemon.
1068 # These logs are great for troubleshooting, depending on your log_level
1069 # settings.
1070 #
1071 # The special value "syslog" makes MPD use the local syslog daemon. This
1072 # setting defaults to logging to syslog, otherwise logging is disabled.
1073 #
1074 log_file "~/.mpd/log"
1075 #
1076 # This setting sets the location of the file which stores the process ID
1077 # for use of mpd --kill and some init scripts. This setting is disabled by
1078 # default and the pid file will not be stored.
1079 #
1080 pid_file "~/.mpd/pid"
1081 #
1082 # This setting sets the location of the file which contains information about
1083 # most variables to get MPD back into the same general shape it was in before
1084 # it was brought down. This setting is disabled by default and the server
1085 # state will be reset on server start up.
1086 #
1087 state_file "~/.mpd/state"
1088 #
1089 # The location of the sticker database. This is a database which
1090 # manages dynamic information attached to songs.
1091 #
1092 sticker_file "~/.mpd/sticker.sql"
1093 #
1094 ###############################################################################
1095
1096
1097 # General music daemon options ################################################
1098 #
1099 # This setting specifies the user that MPD will run as. MPD should never run as
1100 # root and you may use this setting to make MPD change its user ID after
1101 # initialization. This setting is disabled by default and MPD is run as the
1102 # current user.
1103 #
1104 #user "nobody"
1105 #
1106 # This setting specifies the group that MPD will run as. If not specified
1107 # primary group of user specified with "user" setting will be used (if set).
1108 # This is useful if MPD needs to be a member of group such as "audio" to
1109 # have permission to use sound card.
1110 #
1111 #group "nogroup"
1112 #
1113 # This setting sets the address for the daemon to listen on. Careful attention
1114 # should be paid if this is assigned to anything other then the default, any.
1115 # This setting can deny access to control of the daemon. Not effective if
1116 # systemd socket activiation is in use.
1117 #
1118 # For network
1119 #bind_to_address "any"
1120 #
1121 # And for Unix Socket
1122 #bind_to_address "~/.mpd/socket"
1123 #
1124 # This setting is the TCP port that is desired for the daemon to get assigned
1125 # to.
1126 #
1127 #port "6600"
1128 #
1129 # This setting controls the type of information which is logged. Available
1130 # setting arguments are "default", "secure" or "verbose". The "verbose" setting
1131 # argument is recommended for troubleshooting, though can quickly stretch
1132 # available resources on limited hardware storage.
1133 #
1134 #log_level "default"
1135 #
1136 # If you have a problem with your MP3s ending abruptly it is recommended that
1137 # you set this argument to "no" to attempt to fix the problem. If this solves
1138 # the problem, it is highly recommended to fix the MP3 files with vbrfix
1139 # (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
1140 # point gapless MP3 playback can be enabled.
1141 #
1142 #gapless_mp3_playback "yes"
1143 #
1144 # Setting "restore_paused" to "yes" puts MPD into pause mode instead
1145 # of starting playback after startup.
1146 #
1147 #restore_paused "no"
1148 #
1149 # This setting enables MPD to create playlists in a format usable by other
1150 # music players.
1151 #
1152 #save_absolute_paths_in_playlists "no"
1153 #
1154 # This setting defines a list of tag types that will be extracted during the
1155 # audio file discovery process. The complete list of possible values can be
1156 # found in the user manual.
1157 #metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
1158 #
1159 # This setting enables automatic update of MPD's database when files in
1160 # music_directory are changed.
1161 #
1162 #auto_update "yes"
1163 #
1164 # Limit the depth of the directories being watched, 0 means only watch
1165 # the music directory itself. There is no limit by default.
1166 #
1167 #auto_update_depth "3"
1168 #
1169 ###############################################################################
1170
1171
1172 # Symbolic link behavior ######################################################
1173 #
1174 # If this setting is set to "yes", MPD will discover audio files by following
1175 # symbolic links outside of the configured music_directory.
1176 #
1177 #follow_outside_symlinks "yes"
1178 #
1179 # If this setting is set to "yes", MPD will discover audio files by following
1180 # symbolic links inside of the configured music_directory.
1181 #
1182 #follow_inside_symlinks "yes"
1183 #
1184 ###############################################################################
1185
1186
1187 # Zeroconf / Avahi Service Discovery ##########################################
1188 #
1189 # If this setting is set to "yes", service information will be published with
1190 # Zeroconf / Avahi.
1191 #
1192 #zeroconf_enabled "yes"
1193 #
1194 # The argument to this setting will be the Zeroconf / Avahi unique name for
1195 # this MPD server on the network.
1196 #
1197 #zeroconf_name "Music Player"
1198 #
1199 ###############################################################################
1200
1201
1202 # Permissions #################################################################
1203 #
1204 # If this setting is set, MPD will require password authorization. The password
1205 # setting can be specified multiple times for different password profiles.
1206 #
1207 #password "password@read,add,control,admin"
1208 #
1209 # This setting specifies the permissions a user has who has not yet logged in.
1210 #
1211 #default_permissions "read,add,control,admin"
1212 #
1213 ###############################################################################
1214
1215
1216 # Database #######################################################################
1217 #
1218
1219 #database {
1220 # plugin "proxy"
1221 # host "other.mpd.host"
1222 # port "6600"
1223 #}
1224
1225 # Input #######################################################################
1226 #
1227
1228 input {
1229 plugin "curl"
1230 # proxy "proxy.isp.com:8080"
1231 # proxy_user "user"
1232 # proxy_password "password"
1233 }
1234
1235 #
1236 ###############################################################################
1237
1238 # Audio Output ################################################################
1239 #
1240
1241 audio_output {
1242 type "pulse"
1243 name "pulse audio"
1244 }
1245
1246 audio_output {
1247 type "fifo"
1248 name "my_fifo"
1249 path "/tmp/mpd.fifo"
1250 format "44100:16:2"
1251 }
1252
1253 # MPD supports various audio output types, as well as playing through multiple
1254 # audio outputs at the same time, through multiple audio_output settings
1255 # blocks. Setting this block is optional, though the server will only attempt
1256 # autodetection for one sound card.
1257 #
1258 # An example of an ALSA output:
1259 #
1260 #audio_output {
1261 # type "alsa"
1262 # name "My ALSA Device"
1263 ## device "hw:0,0" # optional
1264 ## mixer_type "hardware" # optional
1265 ## mixer_device "default" # optional
1266 ## mixer_control "PCM" # optional
1267 ## mixer_index "0" # optional
1268 #}
1269 #
1270 # An example of an OSS output:
1271 #
1272 #audio_output {
1273 # type "oss"
1274 # name "My OSS Device"
1275 ## device "/dev/dsp" # optional
1276 ## mixer_type "hardware" # optional
1277 ## mixer_device "/dev/mixer" # optional
1278 ## mixer_control "PCM" # optional
1279 #}
1280 #
1281 # An example of a shout output (for streaming to Icecast):
1282 #
1283 #audio_output {
1284 # type "shout"
1285 # encoder "vorbis" # optional
1286 # name "My Shout Stream"
1287 # host "localhost"
1288 # port "8000"
1289 # mount "/mpd.ogg"
1290 # password "hackme"
1291 # quality "5.0"
1292 # bitrate "128"
1293 # format "44100:16:1"
1294 ## protocol "icecast2" # optional
1295 ## user "source" # optional
1296 ## description "My Stream Description" # optional
1297 ## url "http://example.com" # optional
1298 ## genre "jazz" # optional
1299 ## public "no" # optional
1300 ## timeout "2" # optional
1301 ## mixer_type "software" # optional
1302 #}
1303 #
1304 # An example of a recorder output:
1305 #
1306 #audio_output {
1307 # type "recorder"
1308 # name "My recorder"
1309 # encoder "vorbis" # optional, vorbis or lame
1310 # path "/var/lib/mpd/recorder/mpd.ogg"
1311 ## quality "5.0" # do not define if bitrate is defined
1312 # bitrate "128" # do not define if quality is defined
1313 # format "44100:16:1"
1314 #}
1315 #
1316 # An example of a httpd output (built-in HTTP streaming server):
1317 #
1318 #audio_output {
1319 # type "httpd"
1320 # name "My HTTP Stream"
1321 # encoder "vorbis" # optional, vorbis or lame
1322 # port "8000"
1323 # bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
1324 ## quality "5.0" # do not define if bitrate is defined
1325 # bitrate "128" # do not define if quality is defined
1326 # format "44100:16:1"
1327 # max_clients "0" # optional 0=no limit
1328 #}
1329 #
1330 # An example of a pulseaudio output (streaming to a remote pulseaudio server)
1331 #
1332 #audio_output {
1333 # type "pulse"
1334 # name "My Pulse Output"
1335 ## server "remote_server" # optional
1336 ## sink "remote_server_sink" # optional
1337 #}
1338 #
1339 # An example of a winmm output (Windows multimedia API).
1340 #
1341 #audio_output {
1342 # type "winmm"
1343 # name "My WinMM output"
1344 ## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1345 # or
1346 ## device "0" # optional
1347 ## mixer_type "hardware" # optional
1348 #}
1349 #
1350 # An example of an openal output.
1351 #
1352 #audio_output {
1353 # type "openal"
1354 # name "My OpenAL output"
1355 ## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1356 #}
1357 #
1358 # An example of an sndio output.
1359 #
1360 #audio_output {
1361 # type "sndio"
1362 # name "sndio output"
1363 # mixer_type "software"
1364 #}
1365 #
1366 # An example of an OS X output:
1367 #
1368 #audio_output {
1369 # type "osx"
1370 # name "My OS X Device"
1371 ## device "Built-in Output" # optional
1372 ## channel_map "-1,-1,0,1" # optional
1373 #}
1374 #
1375 ## Example "pipe" output:
1376 #
1377 #audio_output {
1378 # type "pipe"
1379 # name "my pipe"
1380 # command "aplay -f cd 2>/dev/null"
1381 ## Or if you're want to use AudioCompress
1382 # command "AudioCompress -m | aplay -f cd 2>/dev/null"
1383 ## Or to send raw PCM stream through PCM:
1384 # command "nc example.org 8765"
1385 # format "44100:16:2"
1386 #}
1387 #
1388 ## An example of a null output (for no audio output):
1389 #
1390 #audio_output {
1391 # type "null"
1392 # name "My Null Output"
1393 # mixer_type "none" # optional
1394 #}
1395 #
1396 ###############################################################################
1397
1398
1399 # Normalization automatic volume adjustments ##################################
1400 #
1401 # This setting specifies the type of ReplayGain to use. This setting can have
1402 # the argument "off", "album", "track" or "auto". "auto" is a special mode that
1403 # chooses between "track" and "album" depending on the current state of
1404 # random playback. If random playback is enabled then "track" mode is used.
1405 # See <http://www.replaygain.org> for more details about ReplayGain.
1406 # This setting is off by default.
1407 #
1408 #replaygain "album"
1409 #
1410 # This setting sets the pre-amp used for files that have ReplayGain tags. By
1411 # default this setting is disabled.
1412 #
1413 #replaygain_preamp "0"
1414 #
1415 # This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1416 # By default this setting is disabled.
1417 #
1418 #replaygain_missing_preamp "0"
1419 #
1420 # This setting enables or disables ReplayGain limiting.
1421 # MPD calculates actual amplification based on the ReplayGain tags
1422 # and replaygain_preamp / replaygain_missing_preamp setting.
1423 # If replaygain_limit is enabled MPD will never amplify audio signal
1424 # above its original level. If replaygain_limit is disabled such amplification
1425 # might occur. By default this setting is enabled.
1426 #
1427 #replaygain_limit "yes"
1428 #
1429 # This setting enables on-the-fly normalization volume adjustment. This will
1430 # result in the volume of all playing audio to be adjusted so the output has
1431 # equal "loudness". This setting is disabled by default.
1432 #
1433 #volume_normalization "no"
1434 #
1435 ###############################################################################
1436
1437 # Character Encoding ##########################################################
1438 #
1439 # If file or directory names do not display correctly for your locale then you
1440 # may need to modify this setting.
1441 #
1442 #filesystem_charset "UTF-8"
1443 #
1444 ###############################################################################
1445 #+end_src
1446
1447 ** msmtp
1448 :PROPERTIES:
1449 :header-args+: :tangle ~/.msmtprc
1450 :END:
1451
1452 #+begin_src conf
1453 # Set default values for all following accounts.
1454 defaults
1455 port 587
1456 tls on
1457 auth on
1458 #tls_trust_file /etc/ssl/certs/ca-certificates.crt
1459 logfile ~/.msmtp.log
1460
1461 # aminb
1462 account aminb
1463 host nix.aminb.org
1464 tls_fingerprint 65:DD:B8:32:D8:CD:F1:DC:B6:34:EE:35:04:18:AC:09:F3:1D:6D:20:F2:4A:E2:BD:64:48:B7:1F:90:BD:C4:BA
1465 tls_starttls on
1466 from amin@aminb.org
1467 user amin@aminb.org
1468 passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
1469
1470 # gnu
1471 account gnu
1472 host fencepost.gnu.org
1473 # use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1474 tls_fingerprint 28:70:42:76:1C:EC:91:5F:D1:B3:27:A1:CD:3B:32:A4:8B:0B:DC:3A:CD:CA:F6:6F:E4:61:BA:69:D7:4D:0D:0B
1475 tls_starttls on
1476 from aminb@gnu.org
1477 user aminb
1478 passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
1479
1480 # gnu (new address)
1481 account gnu-mab : gnu
1482 from mab@gnu.org
1483
1484 # uwaterloo
1485 account uwaterloo
1486 host connect.uwaterloo.ca
1487 tls_starttls on
1488 from abandali@uwaterloo.ca
1489 user abandali
1490 passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
1491 tls_trust_file /etc/ssl/certs/ca-certificates.crt
1492
1493 # Set a default account
1494 account default : aminb
1495 #+end_src
1496
1497 ** ncmpcpp
1498
1499 *** config
1500 :PROPERTIES:
1501 :header-args+: :tangle ~/.ncmpcpp/config
1502 :END:
1503
1504 #+begin_src conf :tangle no
1505 ##############################################################
1506 ## This is the example configuration file. Copy it to ##
1507 ## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
1508 ## and set up your preferences. ##
1509 ##############################################################
1510 #
1511 ##### directories ######
1512 ##
1513 ## Directory for storing ncmpcpp related files.
1514 ## Changing it is useful if you want to store
1515 ## everything somewhere else and provide command
1516 ## line setting for alternative location to config
1517 ## file which defines that while launching ncmpcpp.
1518 ##
1519 #
1520 ncmpcpp_directory = ~/.ncmpcpp
1521 #
1522 ##
1523 ## Directory for storing downloaded lyrics. It
1524 ## defaults to ~/.lyrics since other MPD clients
1525 ## (eg. ncmpc) also use that location.
1526 ##
1527 #
1528 #lyrics_directory = ~/.lyrics
1529 #
1530 ##### connection settings #####
1531 #
1532 #mpd_host = localhost
1533 #
1534 #mpd_port = 6600
1535 #
1536 #mpd_connection_timeout = 5
1537 #
1538 ## Needed for tag editor and file operations to work.
1539 ##
1540 mpd_music_dir = ~/usr/music
1541 #
1542 #mpd_crossfade_time = 5
1543 #
1544 ##### music visualizer #####
1545 ##
1546 ## Note: In order to make music visualizer work you'll
1547 ## need to use mpd fifo output, whose format parameter
1548 ## has to be set to 44100:16:1 for mono visualization
1549 ## or 44100:16:2 for stereo visualization. Example
1550 ## configuration (it has to be put into mpd.conf):
1551 ##
1552 ## audio_output {
1553 ## type "fifo"
1554 ## name "Visualizer feed"
1555 ## path "/tmp/mpd.fifo"
1556 ## format "44100:16:2"
1557 ## }
1558 ##
1559 #
1560 visualizer_fifo_path = /tmp/mpd.fifo
1561 #
1562 ##
1563 ## Note: Below parameter is needed for ncmpcpp
1564 ## to determine which output provides data for
1565 ## visualizer and thus allow syncing between
1566 ## visualization and sound as currently there
1567 ## are some problems with it.
1568 ##
1569 #
1570 visualizer_output_name = my fifo
1571 #
1572 ##
1573 ## If you set format to 44100:16:2, make it 'yes'.
1574 ##
1575 visualizer_in_stereo = yes
1576 #
1577 ##
1578 ## Multiply received samples by given value. Very
1579 ## useful for proper visualization of quiet music.
1580 ##
1581 #visualizer_sample_multiplier = 1
1582 #
1583 ##
1584 ## Note: Below parameter defines how often ncmpcpp
1585 ## has to "synchronize" visualizer and audio outputs.
1586 ## 30 seconds is optimal value, but if you experience
1587 ## synchronization problems, set it to lower value.
1588 ## Keep in mind that sane values start with >=10.
1589 ##
1590 #
1591 visualizer_sync_interval = 30
1592 #
1593 ##
1594 ## Note: To enable spectrum frequency visualization
1595 ## you need to compile ncmpcpp with fftw3 support.
1596 ##
1597 #
1598 ## Available values: spectrum, wave, wave_filled, ellipse.
1599 ##
1600 visualizer_type = spectrum
1601 #
1602 #visualizer_look = ●▮
1603 visualizer_look = "●•"
1604 #
1605 #visualizer_color = blue, cyan, green, yellow, magenta, red
1606 #
1607 ## Alternative subset of 256 colors for terminals that support it.
1608 ##
1609 #visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
1610 #
1611 ##### system encoding #####
1612 ##
1613 ## ncmpcpp should detect your charset encoding
1614 ## but if it failed to do so, you can specify
1615 ## charset encoding you are using here.
1616 ##
1617 ## Note: You can see whether your ncmpcpp build
1618 ## supports charset detection by checking output
1619 ## of `ncmpcpp --version`.
1620 ##
1621 ## Note: Since MPD uses UTF-8 by default, setting
1622 ## this option makes sense only if your encoding
1623 ## is different.
1624 ##
1625 #
1626 #system_encoding = ""
1627 #
1628 ##### delays #####
1629 #
1630 ## Time of inactivity (in seconds) after playlist
1631 ## highlighting will be disabled (0 = always on).
1632 ##
1633 #playlist_disable_highlight_delay = 5
1634 #
1635 ## Defines how long messages are supposed to be visible.
1636 ##
1637 #message_delay_time = 5
1638 #
1639 ##### song format #####
1640 ##
1641 ## For a song format you can use:
1642 ##
1643 ## %l - length
1644 ## %f - filename
1645 ## %D - directory
1646 ## %a - artist
1647 ## %A - album artist
1648 ## %t - title
1649 ## %b - album
1650 ## %y - date
1651 ## %n - track number (01/12 -> 01)
1652 ## %N - full track info (01/12 -> 01/12)
1653 ## %g - genre
1654 ## %c - composer
1655 ## %p - performer
1656 ## %d - disc
1657 ## %C - comment
1658 ## %P - priority
1659 ## $R - begin right alignment
1660 ##
1661 ## If you want to make sure that a part of the format is displayed
1662 ## only when certain tags are present, you can archieve it by
1663 ## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
1664 ## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
1665 ## It is also possible to define a list of alternatives by providing
1666 ## several groups and separating them with '|', e.g. '{%t}|{%f}'
1667 ## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
1668 ## present.
1669 ##
1670 ## Note: If you want to set limit on maximal length of a tag, just
1671 ## put the appropriate number between % and character that defines
1672 ## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
1673 ##
1674 ## In addition, formats support markers used for text attributes.
1675 ## They are followed by character '$'. After that you can put:
1676 ##
1677 ## - 0 - default window color (discards all other colors)
1678 ## - 1 - black
1679 ## - 2 - red
1680 ## - 3 - green
1681 ## - 4 - yellow
1682 ## - 5 - blue
1683 ## - 6 - magenta
1684 ## - 7 - cyan
1685 ## - 8 - white
1686 ## - 9 - end of current color
1687 ## - b - bold text
1688 ## - u - underline text
1689 ## - r - reverse colors
1690 ## - a - use alternative character set
1691 ##
1692 ## If you don't want to use a non-color attribute anymore, just put it
1693 ## again, but this time insert character '/' between '$' and attribute
1694 ## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
1695 ## or filename with reversed colors.
1696 ##
1697 ## If you want to use 256 colors and/or background colors in formats
1698 ## (the naming scheme is described below in section about color
1699 ## definitions), it can be done with the syntax $(COLOR), e.g. to set
1700 ## the artist tag to one of the non-standard colors and make it have
1701 ## yellow background, you need to write $(197_yellow)%a$(end). Note
1702 ## that for standard colors this is interchangable with attributes
1703 ## listed above.
1704 ##
1705 ## Note: colors can be nested.
1706 ##
1707 #
1708 #song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
1709 #
1710 #song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
1711 #
1712 #song_library_format = {%n - }{%t}|{%f}
1713 #
1714 #
1715 #alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
1716 #
1717 #alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
1718 #
1719 #now_playing_prefix = $b
1720 #
1721 #now_playing_suffix = $/b
1722 #
1723 #browser_playlist_prefix = "$2playlist$9 "
1724 #
1725 #selected_item_prefix = $6
1726 #
1727 #selected_item_suffix = $9
1728 #
1729 #modified_item_prefix = $3> $9
1730 #
1731 ##
1732 ## Note: attributes are not supported for the following variables.
1733 ##
1734 #song_window_title_format = {%a - }{%t}|{%f}
1735 ##
1736 ## Note: Below variables are used for sorting songs in browser.
1737 ## The sort mode determines how songs are sorted, and can be used
1738 ## in combination with a sort format to specify a custom sorting format.
1739 ## Available values for browser_sort_mode are "name", "mtime", "format"
1740 ## and "noop".
1741 ##
1742 #
1743 #browser_sort_mode = name
1744 #
1745 #browser_sort_format = {%a - }{%t}|{%f} {(%l)}
1746 #
1747 ##### columns settings #####
1748 ##
1749 ## syntax of song columns list format is "column column etc."
1750 ##
1751 ## - syntax for each column is:
1752 ##
1753 ## (width of the column)[color of the column]{displayed tag}
1754 ##
1755 ## Note: Width is by default in %, if you want a column to
1756 ## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
1757 ## will be the column that take 10% of screen (so the real width
1758 ## will depend on actual screen size), whereas (10f)[white]{a}
1759 ## will take 10 terminal cells, no matter how wide the screen is.
1760 ##
1761 ## - color is optional (if you want the default one,
1762 ## leave the field empty).
1763 ##
1764 ## Note: You can give a column additional attributes by putting appropriate
1765 ## character after displayed tag character. Available attributes are:
1766 ##
1767 ## - r - column will be right aligned
1768 ## - E - if tag is empty, empty tag marker won't be displayed
1769 ##
1770 ## You can also:
1771 ##
1772 ## - give a column custom name by putting it after attributes,
1773 ## separated with character ':', e.g. {lr:Length} gives you
1774 ## right aligned column of lengths named "Length".
1775 ##
1776 ## - define sequence of tags, that have to be displayed in case
1777 ## predecessor is empty in a way similar to the one in classic
1778 ## song format, i.e. using '|' character, e.g. {a|c|p:Owner}
1779 ## creates column named "Owner" that tries to display artist
1780 ## tag and then composer and performer if previous ones are
1781 ## not available.
1782 ##
1783 #
1784 #song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
1785 #
1786 ##### various settings #####
1787 #
1788 ##
1789 ## Note: Custom command that will be executed each
1790 ## time song changes. Useful for notifications etc.
1791 ##
1792 #execute_on_song_change = ""
1793 #
1794 #playlist_show_mpd_host = no
1795 #
1796 #playlist_show_remaining_time = no
1797 #
1798 #playlist_shorten_total_times = no
1799 #
1800 #playlist_separate_albums = no
1801 #
1802 ##
1803 ## Note: Possible display modes: classic, columns.
1804 ##
1805 #playlist_display_mode = columns
1806 #
1807 #browser_display_mode = classic
1808 #
1809 #search_engine_display_mode = classic
1810 #
1811 #playlist_editor_display_mode = classic
1812 #
1813 #discard_colors_if_item_is_selected = yes
1814 #
1815 #incremental_seeking = yes
1816 #
1817 #seek_time = 1
1818 #
1819 #volume_change_step = 2
1820 #
1821 #autocenter_mode = no
1822 #
1823 #centered_cursor = no
1824 #
1825 ##
1826 ## Note: You can specify third character which will
1827 ## be used to build 'empty' part of progressbar.
1828 ##
1829 #progressbar_look = =>
1830 progressbar_look = "─╼╶"
1831 #progressbar_look = "─⊙╶"
1832 #
1833 #progressbar_boldness = yes
1834 #
1835 ## Available values: database, playlist.
1836 ##
1837 #default_place_to_search_in = database
1838 #
1839 ## Available values: classic, alternative.
1840 ##
1841 #user_interface = classic
1842 #
1843 #data_fetching_delay = yes
1844 #
1845 ## Available values: artist, album_artist, date, genre, composer, performer.
1846 ##
1847 #media_library_primary_tag = artist
1848 #
1849 ## Available values: wrapped, normal.
1850 ##
1851 #default_find_mode = wrapped
1852 #
1853 #default_tag_editor_pattern = %n - %t
1854 #
1855 #header_visibility = yes
1856 #
1857 #statusbar_visibility = yes
1858 #
1859 #titles_visibility = yes
1860 #
1861 #header_text_scrolling = yes
1862 #
1863 #cyclic_scrolling = no
1864 #
1865 #lines_scrolled = 2
1866 #
1867 #follow_now_playing_lyrics = no
1868 #
1869 #fetch_lyrics_for_current_song_in_background = no
1870 #
1871 #store_lyrics_in_song_dir = no
1872 #
1873 #generate_win32_compatible_filenames = yes
1874 #
1875 #allow_for_physical_item_deletion = no
1876 #
1877 ##
1878 ## Note: If you set this variable, ncmpcpp will try to
1879 ## get info from last.fm in language you set and if it
1880 ## fails, it will fall back to english. Otherwise it will
1881 ## use english the first time.
1882 ##
1883 ## Note: Language has to be expressed as an ISO 639 alpha-2 code.
1884 ##
1885 #lastfm_preferred_language = en
1886 #
1887 #show_hidden_files_in_local_browser = no
1888 #
1889 ##
1890 ## How shall screen switcher work?
1891 ##
1892 ## - "previous" - switch between the current and previous screen.
1893 ## - "screen1,...,screenN" - switch between given sequence of screens.
1894 ##
1895 ## Screens available for use: help, playlist, browser, search_engine,
1896 ## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
1897 ##
1898 #screen_switcher_mode = playlist, browser
1899 #
1900 ##
1901 ## Note: You can define startup screen
1902 ## by choosing screen from the list above.
1903 ##
1904 #startup_screen = playlist
1905 #
1906 ##
1907 ## Note: You can define startup slave screen
1908 ## by choosing screen from the list above or
1909 ## an empty value for no slave screen.
1910 ##
1911 #startup_slave_screen = ""
1912 #
1913 #startup_slave_screen_focus = no
1914 #
1915 ##
1916 ## Default width of locked screen (in %).
1917 ## Acceptable values are from 20 to 80.
1918 ##
1919 #
1920 #locked_screen_width_part = 50
1921 #
1922 #ask_for_locked_screen_width_part = yes
1923 #
1924 #jump_to_now_playing_song_at_start = yes
1925 #
1926 #ask_before_clearing_playlists = yes
1927 #
1928 #clock_display_seconds = no
1929 #
1930 #display_volume_level = yes
1931 #
1932 #display_bitrate = no
1933 #
1934 #display_remaining_time = no
1935 #
1936 ## Available values: none, basic, extended, perl.
1937 ##
1938 #regular_expressions = perl
1939 #
1940 ##
1941 ## Note: If below is enabled, ncmpcpp will ignore leading
1942 ## "The" word while sorting items in browser, tags in
1943 ## media library, etc.
1944 ##
1945 #ignore_leading_the = no
1946 #
1947 #block_search_constraints_change_if_items_found = yes
1948 #
1949 #mouse_support = yes
1950 #
1951 #mouse_list_scroll_whole_page = yes
1952 #
1953 #empty_tag_marker = <empty>
1954 #
1955 #tags_separator = " | "
1956 #
1957 #tag_editor_extended_numeration = no
1958 #
1959 #media_library_sort_by_mtime = no
1960 #
1961 #enable_window_title = yes
1962 #
1963 ##
1964 ## Note: You can choose default search mode for search
1965 ## engine. Available modes are:
1966 ##
1967 ## - 1 - use mpd built-in searching (no regexes, pattern matching)
1968 ## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
1969 ## but if your mpd is on a remote machine, downloading big database
1970 ## to process it can take a while
1971 ## - 3 - match only exact values (this mode uses mpd function for searching
1972 ## in database and local one for searching in current playlist)
1973 ##
1974 #
1975 #search_engine_default_search_mode = 1
1976 #
1977 #external_editor = nano
1978 #
1979 ## Note: set to yes if external editor is a console application.
1980 ##
1981 #use_console_editor = yes
1982 #
1983 ##### colors definitions #####
1984 ##
1985 ## It is possible to set a background color by setting a color
1986 ## value "<foreground>_<background>", e.g. red_black will set
1987 ## foregound color to red and background color to black.
1988 ##
1989 ## In addition, for terminals that support 256 colors it
1990 ## is possible to set one of them by using a number in range
1991 ## [1, 256] instead of color name, e.g. numerical value
1992 ## corresponding to red_black is 2_1. To find out if the
1993 ## terminal supports 256 colors, run ncmpcpp and check out
1994 ## the bottom of the help screen for list of available colors
1995 ## and their numerical values.
1996 ##
1997 ## Note: due to technical limitations of ncurses, if 256 colors
1998 ## are used, it is possible to either use only the colors with
1999 ## default background color, or all pairs from 1_1 up to 254_127,
2000 ## depending on the ncurses version used.
2001 ##
2002 #
2003 #colors_enabled = yes
2004 #
2005 #empty_tag_color = cyan
2006 #
2007 #header_window_color = default
2008 #
2009 #volume_color = default
2010 #
2011 #state_line_color = default
2012 #
2013 #state_flags_color = default
2014 #
2015 #main_window_color = yellow
2016 #
2017 #color1 = white
2018 #
2019 #color2 = green
2020 #
2021 #main_window_highlight_color = yellow
2022 #
2023 #progressbar_color = black
2024 #
2025 #progressbar_elapsed_color = green
2026 #
2027 #statusbar_color = default
2028 #
2029 #alternative_ui_separator_color = black
2030 #
2031 #active_column_color = red
2032 #
2033 #window_border_color = green
2034 #
2035 #active_window_border = red
2036 #
2037 #+end_src
2038
2039 *** bindings
2040 :PROPERTIES:
2041 :header-args+: :tangle ~/.ncmpcpp/bindings
2042 :END:
2043
2044 #+begin_src conf :tangle no
2045 def_key "j"
2046 scroll_down
2047 def_key "k"
2048 scroll_up
2049
2050 def_key "ctrl-u"
2051 page_up
2052 def_key "ctrl-d"
2053 page_down
2054
2055 def_key "h"
2056 previous_column
2057 def_key "l"
2058 next_column
2059
2060 def_key "."
2061 show_lyrics
2062
2063 def_key "n"
2064 next_found_item
2065 def_key "N"
2066 previous_found_item
2067
2068 def_key "J"
2069 move_sort_order_down
2070 def_key "K"
2071 move_sort_order_up
2072 #+end_src
2073
2074 ** notmuch
2075
2076 *** notmuch-config
2077 :PROPERTIES:
2078 :header-args+: :tangle ~/.notmuch-config
2079 :END:
2080
2081 #+begin_src conf
2082 # .notmuch-config - Configuration file for the notmuch mail system
2083 #
2084 # For more information about notmuch, see https://notmuchmail.org
2085
2086 # Database configuration
2087 #
2088 # The only value supported here is 'path' which should be the top-level
2089 # directory where your mail currently exists and to where mail will be
2090 # delivered in the future. Files should be individual email messages.
2091 # Notmuch will store its database within a sub-directory of the path
2092 # configured here named ".notmuch".
2093 #
2094 [database]
2095 path=/home/amin/mail
2096
2097 # User configuration
2098 #
2099 # Here is where you can let notmuch know how you would like to be
2100 # addressed. Valid settings are
2101 #
2102 # name Your full name.
2103 # primary_email Your primary email address.
2104 # other_email A list (separated by ';') of other email addresses
2105 # at which you receive email.
2106 #
2107 # Notmuch will use the various email addresses configured here when
2108 # formatting replies. It will avoid including your own addresses in the
2109 # recipient list of replies, and will set the From address based on the
2110 # address to which the original email was addressed.
2111 #
2112 [user]
2113 name=Amin Bandali
2114 primary_email=amin@aminb.org
2115 other_email=abandali@uwaterloo.ca;mab@gnu.org;aminb@gnu.org;
2116
2117 # Configuration for "notmuch new"
2118 #
2119 # The following options are supported here:
2120 #
2121 # tags A list (separated by ';') of the tags that will be
2122 # added to all messages incorporated by "notmuch new".
2123 #
2124 # ignore A list (separated by ';') of file and directory names
2125 # that will not be searched for messages by "notmuch new".
2126 #
2127 # NOTE: *Every* file/directory that goes by one of those
2128 # names will be ignored, independent of its depth/location
2129 # in the mail store.
2130 #
2131 [new]
2132 tags=new;
2133 #tags=unread;inbox;
2134 ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
2135
2136 # Search configuration
2137 #
2138 # The following option is supported here:
2139 #
2140 # exclude_tags
2141 # A ;-separated list of tags that will be excluded from
2142 # search results by default. Using an excluded tag in a
2143 # query will override that exclusion.
2144 #
2145 [search]
2146 exclude_tags=deleted;spam;
2147
2148 # Maildir compatibility configuration
2149 #
2150 # The following option is supported here:
2151 #
2152 # synchronize_flags Valid values are true and false.
2153 #
2154 # If true, then the following maildir flags (in message filenames)
2155 # will be synchronized with the corresponding notmuch tags:
2156 #
2157 # Flag Tag
2158 # ---- -------
2159 # D draft
2160 # F flagged
2161 # P passed
2162 # R replied
2163 # S unread (added when 'S' flag is not present)
2164 #
2165 # The "notmuch new" command will notice flag changes in filenames
2166 # and update tags, while the "notmuch tag" and "notmuch restore"
2167 # commands will notice tag changes and update flags in filenames
2168 #
2169 [maildir]
2170 synchronize_flags=true
2171
2172 # Cryptography related configuration
2173 #
2174 # The following option is supported here:
2175 #
2176 # gpg_path
2177 # binary name or full path to invoke gpg.
2178 #
2179 [crypto]
2180 gpg_path=gpg
2181 #+end_src
2182
2183 *** pre-new hook
2184 :PROPERTIES:
2185 :header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
2186 :END:
2187
2188 #+begin_src sh
2189 touch /tmp/gnusieve.log
2190 sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
2191 -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
2192 #+end_src
2193
2194 *** post-new hook
2195 :PROPERTIES:
2196 :header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
2197 :END:
2198
2199 #+begin_src sh
2200 # apply sent tag to messages sent by me
2201 notmuch tag -new +sent -- from:amin@aminb.org or from:mab@gnu.org or from:aminb@gnu.org or from:abandali@uwaterloo.ca
2202
2203 # initial tagging
2204 notmuch tag -latest -- tag:latest
2205 notmuch tag +inbox +unread +latest -new -- tag:new
2206
2207
2208 # apply tags to lists
2209
2210 # <aminb>
2211 notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
2212 notmuch tag -inbox +lists/haskell-weekly -- folder:amin/lists/haskell-weekly
2213
2214 notmuch tag -inbox +pay -- folder:amin/pay
2215 notmuch tag -inbox +banking -- folder:amin/banking
2216 # </aminb>
2217
2218 # <uw>
2219 notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
2220 notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
2221
2222 notmuch tag -inbox +lists/clvsingle -- folder:uwaterloo/lists/Clvsingle
2223 notmuch tag -inbox +lists/gsa -- folder:uwaterloo/lists/GSA
2224 notmuch tag -inbox +lists/math-grad -- folder:uwaterloo/lists/Math-grad
2225 notmuch tag -inbox +lists/scs-grads -- folder:uwaterloo/lists/scs-grads
2226 notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
2227 # </uw>
2228
2229 # <gnu>
2230 notmuch tag -inbox +l/emacs-devel -- folder:gnu/l/emacs-devel
2231 notmuch tag -inbox +l/emacs-orgmode -- folder:gnu/l/emacs-orgmode
2232 notmuch tag -inbox +l/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
2233 notmuch tag -inbox +l/fencepost-users -- folder:gnu/l/fencepost-users
2234 notmuch tag -inbox +l/guix-devel -- folder:gnu/l/guix-devel
2235 notmuch tag -inbox +l/guile-devel -- folder:gnu/l/guile-devel
2236 notmuch tag -inbox +l/help-gnu-emacs -- folder:gnu/l/help-gnu-emacs
2237 notmuch tag -inbox +l/info-gnu-emacs -- folder:gnu/l/info-gnu-emacs
2238 notmuch tag -inbox +l/www-commits -- folder:gnu/l/www-commits
2239 notmuch tag -inbox +l/www-discuss -- folder:gnu/l/www-discuss
2240 notmuch tag -inbox +webmasters -- folder:gnu/webmasters
2241
2242 notmuch tag -inbox +l/deepspec -- folder:gnu/l/deepspec
2243 notmuch tag -inbox +l/haskell-cafe -- folder:gnu/l/haskell-cafe
2244 notmuch tag -inbox +l/haskell-art -- folder:gnu/l/haskell-art
2245 notmuch tag -inbox +l/notmuch -- folder:gnu/l/notmuch
2246
2247 notmuch tag -inbox +l/~aminb/test-priv -- folder:gnu/l/~aminb/test-priv
2248 notmuch tag -inbox +l/~sircmpwn/sr.ht-admins -- folder:gnu/l/~sircmpwn/sr.ht-admins
2249 notmuch tag -inbox +l/~sircmpwn/sr.ht-announce -- folder:gnu/l/~sircmpwn/sr.ht-announce
2250 notmuch tag -inbox +l/~sircmpwn/sr.ht-dev -- folder:gnu/l/~sircmpwn/sr.ht-dev
2251 notmuch tag -inbox +l/~sircmpwn/sr.ht-discuss -- folder:gnu/l/~sircmpwn/sr.ht-discuss
2252 # </gnu>
2253
2254 notmuch tag -inbox -unread +archive/notmuch -- path:archive/notmuch/**
2255 notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**
2256 #+end_src
2257
2258 *** notmuch.service
2259 :PROPERTIES:
2260 :header-args+: :tangle ~/.config/systemd/user/notmuch.service
2261 :END:
2262
2263 #+begin_src conf :tangle no
2264 [Unit]
2265 Description=notmuch service
2266
2267 [Service]
2268 Type=oneshot
2269 ExecStart=/usr/bin/notmuch new
2270 StandardOutput=syslog
2271 StandardError=syslog
2272 #+end_src
2273
2274 *** notmuch.timer
2275 :PROPERTIES:
2276 :header-args+: :tangle ~/.config/systemd/user/notmuch.timer
2277 :END:
2278
2279 #+begin_src conf :tangle no
2280 [Unit]
2281 Description=notmuch timer
2282
2283 [Timer]
2284 OnCalendar=*:0/5
2285 Persistent=true
2286 Unit=notmuch.service
2287
2288 [Install]
2289 WantedBy=timers.target
2290 #+end_src
2291
2292 ** offlineimap
2293
2294 *** offlineimaprc
2295 :PROPERTIES:
2296 :header-args+: :tangle ~/.offlineimaprc
2297 :END:
2298
2299 #+begin_src conf :tangle no
2300 [general]
2301 pythonfile = ~/.offlineimap.py
2302 accounts = Gmail, aminb
2303 maxsyncaccounts = 3
2304
2305 [Account Gmail]
2306 localrepository = GmailL
2307 remoterepository = GmailR
2308
2309 [Account aminb]
2310 localrepository = aminbL
2311 remoterepository = aminbR
2312
2313 [Repository GmailL]
2314 type = Maildir
2315 localfolders = ~/Maildir/Gmail
2316
2317 [Repository GmailR]
2318 type = IMAP
2319 remotehost = imap.gmail.com
2320 remoteusereval = mailuser("gmail")
2321 remotepasseval = mailpasswd("gmail")
2322 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2323 ssl = yes
2324 folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
2325 maxconnections = 1
2326 realdelete = no
2327
2328 [Repository aminbL]
2329 type = Maildir
2330 localfolders = ~/Maildir/aminb
2331
2332 [Repository aminbR]
2333 type = IMAP
2334 remotehost = mail.aminb.org
2335 remoteusereval = mailuser("aminb")
2336 remotepasseval = mailpasswd("aminb")
2337 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2338 ssl = yes
2339 folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
2340 maxconnections = 1
2341 realdelete = no
2342 #+end_src
2343
2344 *** offlineimap.py
2345 :PROPERTIES:
2346 :header-args+: :tangle ~/.offlineimap.py
2347 :END:
2348
2349 #+begin_src python :tangle no
2350 import os
2351 import subprocess
2352
2353 def mailpasswd(acct):
2354 acct = os.path.basename(acct)
2355 path = "/home/amin/.passwd/%s.gpg" % acct
2356 args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
2357 try:
2358 return subprocess.check_output(args).strip()
2359 except subprocess.CalledProcessError:
2360 return ""
2361
2362 def mailuser(acct):
2363 acct = os.path.basename(acct)
2364 path = "/home/amin/.passwd/%s" % acct
2365 args = ["cat", path]
2366 try:
2367 return subprocess.check_output(args).strip()
2368 except subprocess.CalledProcessError:
2369 return ""
2370
2371 def prime_gpg_agent():
2372 ret = False
2373 i = 1
2374 while not ret:
2375 ret = (mailpasswd("prime") == "prime")
2376 if i > 2:
2377 from offlineimap.ui import getglobalui
2378 sys.stderr.write("Error reading in passwords. Terminating.\n")
2379 getglobalui().terminate()
2380 i += 1
2381 return ret
2382
2383 prime_gpg_agent()
2384 #+end_src
2385
2386 ** pigeonhole
2387 *** gnu.sieve
2388 :PROPERTIES:
2389 :header-args+: :tangle ~/sieve/gnu.sieve :comments none
2390 :END:
2391
2392 #+begin_src conf
2393 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags", "include" ];
2394
2395 if anyof (
2396 address :is "from" "webmasters@gnu.org",
2397 address :is "from" "webmasters-comment@gnu.org") {
2398 fileinto :create "webmasters";
2399 stop;
2400 }
2401
2402 include :personal "lists";
2403 #+end_src
2404
2405 *** lists.sieve
2406 :PROPERTIES:
2407 :header-args+: :tangle ~/sieve/lists.sieve :comments none
2408 :END:
2409
2410 #+begin_src conf
2411 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags",
2412 "include" ];
2413
2414 if anyof (
2415 header :contains "list-id" "<emacs-devel.gnu.org>",
2416 header :contains "list-id" "<emacs-orgmode.gnu.org>",
2417 header :contains "list-id" "<emacsconf-discuss.gnu.org>",
2418 header :contains "list-id" "<fencepost-users.gnu.org>",
2419 header :contains "list-id" "<guix-devel.gnu.org>",
2420 header :contains "list-id" "<guile-devel.gnu.org>",
2421 header :contains "list-id" "<help-gnu-emacs.gnu.org>",
2422 header :contains "list-id" "<info-gnu-emacs.gnu.org>",
2423 header :contains "list-id" "<www-commits.gnu.org>",
2424 header :contains "list-id" "<www-discuss.gnu.org>",
2425 header :contains "list-id" "<deepspec.lists.cs.princeton.edu>",
2426 header :contains "list-id" "<haskell-cafe.haskell.org>",
2427 header :contains "list-id" "<haskell-art.we.lurk.org>",
2428 header :contains "list-id" "<notmuch.notmuchmail.org>") {
2429 if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
2430 set :lower "listname" "${1}";
2431 fileinto :create "l/${listname}";
2432 }
2433 }
2434
2435 if anyof (
2436 header :contains "list-id" "<~aminb/test-priv@lists.sr.ht>",
2437 header :contains "list-id" "<~sircmpwn/sr.ht-admins@lists.sr.ht>",
2438 header :contains "list-id" "<~sircmpwn/sr.ht-announce@lists.sr.ht>",
2439 header :contains "list-id" "<~sircmpwn/sr.ht-dev@lists.sr.ht>",
2440 header :contains "list-id" "<~sircmpwn/sr.ht-discuss@lists.sr.ht>") {
2441 if header :regex "list-id" "(~[a-z_0-9-]+)/([a-z_0-9.-]+)@" {
2442 set :lower "username" "${1}";
2443 set :lower "listname" "${2}";
2444 fileinto :create "l/${username}/${listname}";
2445 }
2446 }
2447 #+end_src
2448
2449 ** polybar
2450
2451 *** config
2452 :PROPERTIES:
2453 :header-args+: :tangle ~/.config/polybar/config
2454 :END:
2455
2456 #+begin_src conf :tangle no
2457 ;=====================================================
2458 ;
2459 ; To learn more about how to configure Polybar
2460 ; go to https://github.com/jaagr/polybar
2461 ;
2462 ; The README contains alot of information
2463 ;
2464 ;=====================================================
2465
2466 [colors]
2467 ;background = ${xrdb:color0:#222}
2468 background = #222
2469 background-alt = #444
2470 ;foreground = ${xrdb:color7:#222}
2471 foreground = #eee
2472 foreground-alt = #888
2473 primary = #ffb52a
2474 secondary = #e60053
2475 alert = #bd2c40
2476
2477 [bar/main]
2478 ;monitor = ${env:MONITOR:HDMI-1}
2479 width = 100%
2480 height = 27
2481 ;offset-x = 1%
2482 ;offset-y = 1%
2483 radius = 3.0
2484 fixed-center = true
2485
2486 background = ${colors.background}
2487 foreground = ${colors.foreground}
2488
2489 line-size = 3
2490 line-color = #f00
2491
2492 border-size = 4
2493 border-color = #00000000
2494
2495 padding-left = 0
2496 padding-right = 2
2497
2498 module-margin-left = 2
2499 module-margin-right = 2
2500
2501 font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
2502 font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
2503 font-2 = Wuncon Siji:pixelsize=10;1
2504 font-3 = FontAwesome:pixelsize=10;1
2505
2506 modules-left = bspwm xwindow
2507 modules-center =
2508 modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
2509
2510 tray-position = right
2511 tray-padding = 1
2512 ;tray-transparent = true
2513 ;tray-background = #0063ff
2514 tray-maxsize = 18
2515
2516 wm-restack = bspwm
2517
2518 ;override-redirect = true
2519
2520 scroll-up = bspwm-desknext
2521 scroll-down = bspwm-deskprev
2522
2523 [module/xwindow]
2524 type = internal/xwindow
2525 label = %title:0:50:...%
2526
2527 [module/xkeyboard]
2528 type = internal/xkeyboard
2529 blacklist-0 = num lock
2530
2531 format-prefix = " "
2532 format-prefix-foreground = ${colors.foreground-alt}
2533 format-prefix-underline = ${colors.secondary}
2534
2535 label-layout = %layout%
2536 label-layout-underline = ${colors.secondary}
2537
2538 label-indicator-padding = 2
2539 label-indicator-margin = 1
2540 label-indicator-background = ${colors.secondary}
2541 label-indicator-underline = ${colors.secondary}
2542
2543 [module/filesystem]
2544 type = internal/fs
2545 interval = 25
2546
2547 mount-0 = /
2548
2549 label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
2550 label-unmounted = %mountpoint% not mounted
2551 label-unmounted-foreground = ${colors.foreground-alt}
2552
2553 [module/bspwm]
2554 type = internal/bspwm
2555
2556 label-focused = %index%
2557 label-focused-background = ${colors.background-alt}
2558 label-focused-underline= ${colors.primary}
2559 label-focused-padding = 2
2560
2561 label-occupied = %index%
2562 label-occupied-padding = 2
2563
2564 label-urgent = %index%!
2565 label-urgent-background = ${colors.alert}
2566 label-urgent-padding = 2
2567
2568 label-empty = %index%
2569 label-empty-foreground = ${colors.foreground-alt}
2570 label-empty-padding = 2
2571
2572 [module/i3]
2573 type = internal/i3
2574 format = <label-state> <label-mode>
2575 index-sort = true
2576 wrapping-scroll = false
2577
2578 ; Only show workspaces on the same output as the bar
2579 ;pin-workspaces = true
2580
2581 label-mode-padding = 2
2582 label-mode-foreground = #000
2583 label-mode-background = ${colors.primary}
2584
2585 ; focused = Active workspace on focused monitor
2586 label-focused = %index%
2587 label-focused-background = ${module/bspwm.label-focused-background}
2588 label-focused-underline = ${module/bspwm.label-focused-underline}
2589 label-focused-padding = ${module/bspwm.label-focused-padding}
2590
2591 ; unfocused = Inactive workspace on any monitor
2592 label-unfocused = %index%
2593 label-unfocused-padding = ${module/bspwm.label-occupied-padding}
2594
2595 ; visible = Active workspace on unfocused monitor
2596 label-visible = %index%
2597 label-visible-background = ${self.label-focused-background}
2598 label-visible-underline = ${self.label-focused-underline}
2599 label-visible-padding = ${self.label-focused-padding}
2600
2601 ; urgent = Workspace with urgency hint set
2602 label-urgent = %index%
2603 label-urgent-background = ${module/bspwm.label-urgent-background}
2604 label-urgent-padding = ${module/bspwm.label-urgent-padding}
2605
2606 [module/mpd]
2607 type = internal/mpd
2608 format-online = <label-song> <icon-prev> <icon-stop> <toggle> <icon-next>
2609
2610 icon-prev = 
2611 icon-stop = 
2612 icon-play = 
2613 icon-pause = 
2614 icon-next = 
2615
2616 label-song-maxlen = 25
2617 label-song-ellipsis = true
2618
2619 [module/xbacklight]
2620 type = internal/xbacklight
2621
2622 format = <label> <bar>
2623 label = BL
2624
2625 bar-width = 10
2626 bar-indicator = |
2627 bar-indicator-foreground = #ff
2628 bar-indicator-font = 2
2629 bar-fill = ─
2630 bar-fill-font = 2
2631 bar-fill-foreground = #9f78e1
2632 bar-empty = ─
2633 bar-empty-font = 2
2634 bar-empty-foreground = ${colors.foreground-alt}
2635
2636 [module/backlight-acpi]
2637 inherit = module/xbacklight
2638 type = internal/backlight
2639 ;card = intel_backlight
2640 card = mba6x_backlight
2641
2642 [module/cpu]
2643 type = internal/cpu
2644 interval = 2
2645 format-prefix = " "
2646 format-prefix-foreground = ${colors.foreground-alt}
2647 format-underline = #f90000
2648 label = %percentage%%
2649
2650 [module/memory]
2651 type = internal/memory
2652 interval = 2
2653 format-prefix = " "
2654 format-prefix-foreground = ${colors.foreground-alt}
2655 format-underline = #4bffdc
2656 label = %percentage_used%%
2657
2658 [module/wlan]
2659 type = internal/network
2660 interface =
2661 interval = 3.0
2662
2663 format-connected = <ramp-signal> <label-connected>
2664 format-connected-underline = #9f78e1
2665 label-connected = %essid%
2666
2667 format-disconnected =
2668 ;format-disconnected = <label-disconnected>
2669 ;format-disconnected-underline = ${self.format-connected-underline}
2670 ;label-disconnected = %ifname% disconnected
2671 ;label-disconnected-foreground = ${colors.foreground-alt}
2672
2673 ramp-signal-0 = 
2674 ramp-signal-1 = 
2675 ramp-signal-2 = 
2676 ramp-signal-3 = 
2677 ramp-signal-4 = 
2678 ramp-signal-foreground = ${colors.foreground-alt}
2679
2680 [module/eth]
2681 type = internal/network
2682 interface =
2683 interval = 3.0
2684
2685 format-connected-underline = #55aa55
2686 format-connected-prefix = " "
2687 format-connected-prefix-foreground = ${colors.foreground-alt}
2688 label-connected = %local_ip%
2689
2690 format-disconnected =
2691 ;format-disconnected = <label-disconnected>
2692 ;format-disconnected-underline = ${self.format-connected-underline}
2693 ;label-disconnected = %ifname% disconnected
2694 ;label-disconnected-foreground = ${colors.foreground-alt}
2695
2696 [module/date]
2697 type = internal/date
2698 interval = 5
2699
2700 date =
2701 date-alt = " %Y-%m-%d"
2702
2703 time = %H:%M
2704 time-alt = %H:%M:%S
2705
2706 format-prefix = 
2707 format-prefix-foreground = ${colors.foreground-alt}
2708 format-underline = #0a6cf5
2709
2710 label = %date% %time%
2711
2712 [module/volume]
2713 type = internal/volume
2714
2715 format-volume = <label-volume> <bar-volume>
2716 label-volume = vol
2717 label-volume-foreground = ${root.foreground}
2718
2719 format-muted-prefix = " "
2720 format-muted-foreground = ${colors.foreground-alt}
2721 label-muted = mute
2722
2723 bar-volume-width = 10
2724 bar-volume-foreground-0 = #55aa55
2725 bar-volume-foreground-1 = #55aa55
2726 bar-volume-foreground-2 = #55aa55
2727 bar-volume-foreground-3 = #55aa55
2728 bar-volume-foreground-4 = #55aa55
2729 bar-volume-foreground-5 = #f5a70a
2730 bar-volume-foreground-6 = #ff5555
2731 bar-volume-gradient = false
2732 bar-volume-indicator = |
2733 bar-volume-indicator-font = 2
2734 bar-volume-fill = ─
2735 bar-volume-fill-font = 2
2736 bar-volume-empty = ─
2737 bar-volume-empty-font = 2
2738 bar-volume-empty-foreground = ${colors.foreground-alt}
2739
2740 [module/battery]
2741 type = internal/battery
2742 battery = BAT0
2743 adapter = ADP1
2744 full-at = 64
2745
2746 format-charging = <animation-charging> <label-charging>
2747 format-charging-underline = #ffb52a
2748
2749 format-discharging = <ramp-capacity> <label-discharging>
2750 format-discharging-underline = ${self.format-charging-underline}
2751
2752 format-full-prefix = " "
2753 format-full-prefix-foreground = ${colors.foreground-alt}
2754 format-full-underline = ${self.format-charging-underline}
2755
2756 ramp-capacity-0 = 
2757 ramp-capacity-1 = 
2758 ramp-capacity-2 = 
2759 ramp-capacity-foreground = ${colors.foreground-alt}
2760
2761 animation-charging-0 = 
2762 animation-charging-1 = 
2763 animation-charging-2 = 
2764 animation-charging-foreground = ${colors.foreground-alt}
2765 animation-charging-framerate = 750
2766
2767 [module/temperature]
2768 type = internal/temperature
2769 thermal-zone = 1
2770 warn-temperature = 66
2771
2772 format = <ramp> <label>
2773 format-underline = #f50a4d
2774 format-warn = <ramp> <label-warn>
2775 format-warn-underline = ${self.format-underline}
2776
2777 label = %temperature%
2778 label-warn = %temperature%
2779 label-warn-foreground = ${colors.secondary}
2780
2781 ramp-0 = 
2782 ramp-1 = 
2783 ramp-2 = 
2784 ramp-foreground = ${colors.foreground-alt}
2785
2786 [module/powermenu]
2787 type = custom/menu
2788
2789 format-spacing = 1
2790
2791 label-open = 
2792 label-open-foreground = ${colors.secondary}
2793 label-close =  cancel
2794 label-close-foreground = ${colors.secondary}
2795 label-separator = |
2796 label-separator-foreground = ${colors.foreground-alt}
2797
2798 menu-0-0 = reboot
2799 menu-0-0-exec = menu-open-1
2800 menu-0-1 = power off
2801 menu-0-1-exec = menu-open-2
2802
2803 menu-1-0 = cancel
2804 menu-1-0-exec = menu-open-0
2805 menu-1-1 = reboot
2806 menu-1-1-exec = sudo reboot
2807
2808 menu-2-0 = power off
2809 menu-2-0-exec = sudo poweroff
2810 menu-2-1 = cancel
2811 menu-2-1-exec = menu-open-0
2812
2813 [module/mail]
2814 type = custom/script
2815 interval = 60
2816 format = <label>
2817 format-prefix = " "
2818 format-prefix-foreground = ${colors.foreground-alt}
2819 format-underline = #0a6cf5
2820 exec = notmuch count tag:unread
2821
2822 [settings]
2823 screenchange-reload = true
2824 ;compositing-background = xor
2825 ;compositing-background = screen
2826 ;compositing-foreground = source
2827 ;compositing-border = over
2828
2829 [global/wm]
2830 margin-top = 0
2831 margin-bottom = 0
2832
2833 ; vim:ft=dosini
2834 #+end_src
2835
2836 *** polybar-launch
2837 :PROPERTIES:
2838 :header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
2839 :END:
2840
2841 #+begin_src sh :tangle no
2842 # Terminate already running bar instances
2843 killall -q polybar
2844
2845 # Wait until the processes have been shut down
2846 while pgrep -x polybar >/dev/null; do sleep 1; done
2847
2848 # Launch main bar
2849 polybar main &
2850
2851 echo "Bars launched..."
2852 #+end_src
2853
2854 ** PowerTOP
2855 :PROPERTIES:
2856 :header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
2857 :END:
2858
2859 #+begin_src conf
2860 [Unit]
2861 Description=Powertop tunings
2862
2863 [Service]
2864 ExecStart=/usr/bin/powertop --auto-tune
2865 RemainAfterExit=true
2866
2867 [Install]
2868 WantedBy=multi-user.target
2869 #+end_src
2870
2871 ** ranger
2872
2873 *** rc.conf
2874 :PROPERTIES:
2875 :header-args+: :tangle ~/.config/ranger/rc.conf
2876 :END:
2877
2878 #+begin_src conf :tangle no
2879 # ===================================================================
2880 # This file contains the default startup commands for ranger.
2881 # To change them, it is recommended to create the file
2882 # ~/.config/ranger/rc.conf and add your custom commands there.
2883 #
2884 # If you copy this whole file there, you may want to set the environment
2885 # variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
2886 #
2887 # The purpose of this file is mainly to define keybindings and settings.
2888 # For running more complex python code, please create a plugin in "plugins/" or
2889 # a command in "commands.py".
2890 #
2891 # Each line is a command that will be run before the user interface
2892 # is initialized. As a result, you can not use commands which rely
2893 # on the UI such as :delete or :mark.
2894 # ===================================================================
2895
2896 # ===================================================================
2897 # == Options
2898 # ===================================================================
2899
2900 # How many columns are there, and what are their relative widths?
2901 set column_ratios 1,3,4
2902
2903 # Which files should be hidden? (regular expression)
2904 set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
2905
2906 # Show hidden files? You can toggle this by typing 'zh'
2907 set show_hidden false
2908
2909 # Ask for a confirmation when running the "delete" command?
2910 # Valid values are "always" (default), "never", "multiple"
2911 # With "multiple", ranger will ask only if you delete multiple files at once.
2912 set confirm_on_delete multiple
2913
2914 # Which script is used to generate file previews?
2915 # ranger ships with scope.sh, a script that calls external programs (see
2916 # README for dependencies) to preview images, archives, etc.
2917 set preview_script ~/.config/ranger/scope.sh
2918
2919 # Use the external preview script or display simple plain text previews?
2920 set use_preview_script true
2921
2922 # Open all images in this directory when running certain image viewers
2923 # like feh or sxiv? You can still open selected files by marking them.
2924 set open_all_images true
2925
2926 # Be aware of version control systems and display information.
2927 set vcs_aware false
2928
2929 # State of the three backends git, hg, bzr. The possible states are
2930 # disabled, local (only show local info), enabled (show local and remote
2931 # information).
2932 set vcs_backend_git enabled
2933 set vcs_backend_hg disabled
2934 set vcs_backend_bzr disabled
2935
2936 # Preview images in full color with the external command "w3mimgpreview"?
2937 # This requires the console web browser "w3m" and a supported terminal.
2938 # It has been successfully tested with "xterm" and "urxvt" without tmux.
2939 set preview_images true
2940
2941 # Use a unicode "..." character to mark cut-off filenames?
2942 set unicode_ellipsis false
2943
2944 # Show dotfiles in the bookmark preview box?
2945 set show_hidden_bookmarks true
2946
2947 # Which colorscheme to use? These colorschemes are available by default:
2948 # default, jungle, snow
2949 set colorscheme default
2950
2951 # Preview files on the rightmost column?
2952 # And collapse (shrink) the last column if there is nothing to preview?
2953 set preview_files true
2954 set preview_directories true
2955 set collapse_preview true
2956
2957 # Save the console history on exit?
2958 set save_console_history true
2959
2960 # Draw the status bar on top of the browser window (default: bottom)
2961 set status_bar_on_top false
2962
2963 # Draw a progress bar in the status bar which displays the average state of all
2964 # currently running tasks which support progress bars?
2965 set draw_progress_bar_in_status_bar true
2966
2967 # Draw borders around columns?
2968 set draw_borders true
2969
2970 # Display the directory name in tabs?
2971 set dirname_in_tabs false
2972
2973 # Enable the mouse support?
2974 set mouse_enabled true
2975
2976 # Display the file size in the main column or status bar?
2977 set display_size_in_main_column true
2978 set display_size_in_status_bar true
2979
2980 # Display files tags in all columns or only in main column?
2981 set display_tags_in_all_columns true
2982
2983 # Set a title for the window?
2984 set update_title false
2985
2986 # Set the title to "ranger" in the tmux program?
2987 set update_tmux_title false
2988
2989 # Shorten the title if it gets long? The number defines how many
2990 # directories are displayed at once, 0 turns off this feature.
2991 set shorten_title 3
2992
2993 # Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
2994 set tilde_in_titlebar false
2995
2996 # How many directory-changes or console-commands should be kept in history?
2997 set max_history_size 20
2998 set max_console_history_size 50
2999
3000 # Try to keep so much space between the top/bottom border when scrolling:
3001 set scroll_offset 8
3002
3003 # Flush the input after each key hit? (Noticable when ranger lags)
3004 set flushinput true
3005
3006 # Padding on the right when there's no preview?
3007 # This allows you to click into the space to run the file.
3008 set padding_right true
3009
3010 # Save bookmarks (used with mX and `X) instantly?
3011 # This helps to synchronize bookmarks between multiple ranger
3012 # instances but leads to *slight* performance loss.
3013 # When false, bookmarks are saved when ranger is exited.
3014 set autosave_bookmarks true
3015
3016 # You can display the "real" cumulative size of directories by using the
3017 # command :get_cumulative_size or typing "dc". The size is expensive to
3018 # calculate and will not be updated automatically. You can choose
3019 # to update it automatically though by turning on this option:
3020 set autoupdate_cumulative_size false
3021
3022 # Turning this on makes sense for screen readers:
3023 set show_cursor false
3024
3025 # One of: size, basename, mtime, type
3026 set sort natural
3027
3028 # Additional sorting options
3029 set sort_reverse false
3030 set sort_case_insensitive true
3031 set sort_directories_first true
3032
3033 # Enable this if key combinations with the Alt Key don't work for you.
3034 # (Especially on xterm)
3035 set xterm_alt_key false
3036
3037 # ===================================================================
3038 # == Local Options
3039 # ===================================================================
3040 # You can set local options that only affect a single directory.
3041
3042 # Examples:
3043 # setlocal path=~/downloads sort mtime
3044
3045 # ===================================================================
3046 # == Command Aliases in the Console
3047 # ===================================================================
3048
3049 alias e edit
3050 alias q quit
3051 alias q! quitall
3052 alias qall quitall
3053 alias setl setlocal
3054
3055 alias filter scout -prt
3056 alias find scout -aet
3057 alias mark scout -mr
3058 alias unmark scout -Mr
3059 alias search scout -rs
3060 alias search_inc scout -rts
3061 alias travel scout -aefiklst
3062
3063 # ===================================================================
3064 # == Define keys for the browser
3065 # ===================================================================
3066
3067 # Basic
3068 map Q quit!
3069 map q quit
3070 copymap q ZZ ZQ
3071
3072 map R reload_cwd
3073 map <C-r> reset
3074 map <C-l> redraw_window
3075 map <C-c> abort
3076 map <esc> change_mode normal
3077
3078 map i display_file
3079 map ? help
3080 map W display_log
3081 map w taskview_open
3082 map S shell $SHELL
3083
3084 map : console
3085 map ; console
3086 map ! console shell
3087 map @ console -p6 shell %%s
3088 map # console shell -p
3089 map s console shell
3090 map r chain draw_possible_programs; console open_with
3091 map f console find
3092 map cd console cd
3093
3094 # Tagging / Marking
3095 map t tag_toggle
3096 map ut tag_remove
3097 map "<any> tag_toggle tag=%any
3098 map <Space> mark_files toggle=True
3099 map v mark_files all=True toggle=True
3100 map uv mark_files all=True val=False
3101 map V toggle_visual_mode
3102 map uV toggle_visual_mode reverse=True
3103
3104 # For the nostalgics: Midnight Commander bindings
3105 map <F1> help
3106 map <F3> display_file
3107 map <F4> edit
3108 map <F5> copy
3109 map <F6> cut
3110 map <F7> console mkdir
3111 map <F8> console delete
3112 map <F10> exit
3113
3114 # In case you work on a keyboard with dvorak layout
3115 map <UP> move up=1
3116 map <DOWN> move down=1
3117 map <LEFT> move left=1
3118 map <RIGHT> move right=1
3119 map <HOME> move to=0
3120 map <END> move to=-1
3121 map <PAGEDOWN> move down=1 pages=True
3122 map <PAGEUP> move up=1 pages=True
3123 map <CR> move right=1
3124 map <DELETE> console delete
3125 map <INSERT> console touch
3126
3127 # VIM-like
3128 copymap <UP> k
3129 copymap <DOWN> j
3130 copymap <LEFT> h
3131 copymap <RIGHT> l
3132 copymap <HOME> gg
3133 copymap <END> G
3134 copymap <PAGEDOWN> <C-F>
3135 copymap <PAGEUP> <C-B>
3136
3137 map J move down=0.5 pages=True
3138 map K move up=0.5 pages=True
3139 copymap J <C-D>
3140 copymap K <C-U>
3141
3142 # Jumping around
3143 map H history_go -1
3144 map L history_go 1
3145 map ] move_parent 1
3146 map [ move_parent -1
3147 map } traverse
3148
3149 map gh cd ~
3150 map ge cd /etc
3151 map gu cd /usr
3152 map gd cd /dev
3153 map gl cd -r .
3154 map gL cd -r %f
3155 map go cd /opt
3156 map gv cd /var
3157 map gm cd /media
3158 map gM cd /mnt
3159 map gs cd /srv
3160 map gr cd /
3161 map gR eval fm.cd(ranger.RANGERDIR)
3162 map g/ cd /
3163 map g? cd /usr/share/doc/ranger
3164
3165 # External Programs
3166 map E edit
3167 map du shell -p du --max-depth=1 -h --apparent-size
3168 map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
3169 map yp shell -d echo -n %d/%f | xsel -i
3170 map yd shell -d echo -n %d | xsel -i
3171 map yn shell -d echo -n %f | xsel -i
3172
3173 # Filesystem Operations
3174 map = chmod
3175
3176 map cw console rename
3177 map A eval fm.open_console('rename ' + fm.thisfile.basename)
3178 map I eval fm.open_console('rename ' + fm.thisfile.basename, position=7)
3179
3180 map pp paste
3181 map po paste overwrite=True
3182 map pl paste_symlink relative=False
3183 map pL paste_symlink relative=True
3184 map phl paste_hardlink
3185 map pht paste_hardlinked_subtree
3186
3187 map dd cut
3188 map ud uncut
3189 map da cut mode=add
3190 map dr cut mode=remove
3191
3192 map yy copy
3193 map uy uncut
3194 map ya copy mode=add
3195 map yr copy mode=remove
3196
3197 # Temporary workarounds
3198 map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
3199 map dG eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
3200 map dj eval fm.cut(dirarg=dict(down=1), narg=quantifier)
3201 map dk eval fm.cut(dirarg=dict(up=1), narg=quantifier)
3202 map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
3203 map yG eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
3204 map yj eval fm.copy(dirarg=dict(down=1), narg=quantifier)
3205 map yk eval fm.copy(dirarg=dict(up=1), narg=quantifier)
3206
3207 # Searching
3208 map / console search
3209 map n search_next
3210 map N search_next forward=False
3211 map ct search_next order=tag
3212 map cs search_next order=size
3213 map ci search_next order=mimetype
3214 map cc search_next order=ctime
3215 map cm search_next order=mtime
3216 map ca search_next order=atime
3217
3218 # Tabs
3219 map <C-n> tab_new ~
3220 map <C-w> tab_close
3221 map <TAB> tab_move 1
3222 map <S-TAB> tab_move -1
3223 map <A-Right> tab_move 1
3224 map <A-Left> tab_move -1
3225 map gt tab_move 1
3226 map gT tab_move -1
3227 map gn tab_new ~
3228 map gc tab_close
3229 map uq tab_restore
3230 map <a-1> tab_open 1
3231 map <a-2> tab_open 2
3232 map <a-3> tab_open 3
3233 map <a-4> tab_open 4
3234 map <a-5> tab_open 5
3235 map <a-6> tab_open 6
3236 map <a-7> tab_open 7
3237 map <a-8> tab_open 8
3238 map <a-9> tab_open 9
3239
3240 # Sorting
3241 map or toggle_option sort_reverse
3242 map os chain set sort=size; set sort_reverse=False
3243 map ob chain set sort=basename; set sort_reverse=False
3244 map on chain set sort=natural; set sort_reverse=False
3245 map om chain set sort=mtime; set sort_reverse=False
3246 map oc chain set sort=ctime; set sort_reverse=False
3247 map oa chain set sort=atime; set sort_reverse=False
3248 map ot chain set sort=type; set sort_reverse=False
3249
3250 map oS chain set sort=size; set sort_reverse=True
3251 map oB chain set sort=basename; set sort_reverse=True
3252 map oN chain set sort=natural; set sort_reverse=True
3253 map oM chain set sort=mtime; set sort_reverse=True
3254 map oC chain set sort=ctime; set sort_reverse=True
3255 map oA chain set sort=atime; set sort_reverse=True
3256 map oT chain set sort=type; set sort_reverse=True
3257
3258 map dc get_cumulative_size
3259
3260 # Settings
3261 map zc toggle_option collapse_preview
3262 map zd toggle_option sort_directories_first
3263 map zh toggle_option show_hidden
3264 map <C-h> toggle_option show_hidden
3265 map zi toggle_option flushinput
3266 map zm toggle_option mouse_enabled
3267 map zp toggle_option preview_files
3268 map zP toggle_option preview_directories
3269 map zs toggle_option sort_case_insensitive
3270 map zu toggle_option autoupdate_cumulative_size
3271 map zv toggle_option use_preview_script
3272 map zf console filter
3273
3274 # Bookmarks
3275 map `<any> enter_bookmark %any
3276 map '<any> enter_bookmark %any
3277 map m<any> set_bookmark %any
3278 map um<any> unset_bookmark %any
3279
3280 map m<bg> draw_bookmarks
3281 copymap m<bg> um<bg> `<bg> '<bg>
3282
3283 # Generate all the chmod bindings with some python help:
3284 eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
3285 eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
3286 eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
3287 eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
3288 eval for arg in "rwxXst": cmd("map +{0} shell -d chmod u+{0} %s".format(arg))
3289
3290 eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
3291 eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
3292 eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
3293 eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
3294 eval for arg in "rwxXst": cmd("map -{0} shell -d chmod u-{0} %s".format(arg))
3295
3296 # ===================================================================
3297 # == Define keys for the console
3298 # ===================================================================
3299 # Note: Unmapped keys are passed directly to the console.
3300
3301 # Basic
3302 cmap <tab> eval fm.ui.console.tab()
3303 cmap <s-tab> eval fm.ui.console.tab(-1)
3304 cmap <ESC> eval fm.ui.console.close()
3305 cmap <CR> eval fm.ui.console.execute()
3306 cmap <C-l> redraw_window
3307
3308 copycmap <ESC> <C-c>
3309 copycmap <CR> <C-j>
3310
3311 # Move around
3312 cmap <up> eval fm.ui.console.history_move(-1)
3313 cmap <down> eval fm.ui.console.history_move(1)
3314 cmap <left> eval fm.ui.console.move(left=1)
3315 cmap <right> eval fm.ui.console.move(right=1)
3316 cmap <home> eval fm.ui.console.move(right=0, absolute=True)
3317 cmap <end> eval fm.ui.console.move(right=-1, absolute=True)
3318
3319 # Line Editing
3320 cmap <backspace> eval fm.ui.console.delete(-1)
3321 cmap <delete> eval fm.ui.console.delete(0)
3322 cmap <C-w> eval fm.ui.console.delete_word()
3323 cmap <C-k> eval fm.ui.console.delete_rest(1)
3324 cmap <C-u> eval fm.ui.console.delete_rest(-1)
3325 cmap <C-y> eval fm.ui.console.paste()
3326
3327 # And of course the emacs way
3328 copycmap <up> <C-p>
3329 copycmap <down> <C-n>
3330 copycmap <left> <C-b>
3331 copycmap <right> <C-f>
3332 copycmap <home> <C-a>
3333 copycmap <end> <C-e>
3334 copycmap <delete> <C-d>
3335 copycmap <backspace> <C-h>
3336
3337 # Note: There are multiple ways to express backspaces. <backspace> (code 263)
3338 # and <backspace2> (code 127). To be sure, use both.
3339 copycmap <backspace> <backspace2>
3340
3341 # This special expression allows typing in numerals:
3342 cmap <allow_quantifiers> false
3343
3344 # ===================================================================
3345 # == Pager Keybindings
3346 # ===================================================================
3347
3348 # Movement
3349 pmap <down> pager_move down=1
3350 pmap <up> pager_move up=1
3351 pmap <left> pager_move left=4
3352 pmap <right> pager_move right=4
3353 pmap <home> pager_move to=0
3354 pmap <end> pager_move to=-1
3355 pmap <pagedown> pager_move down=1.0 pages=True
3356 pmap <pageup> pager_move up=1.0 pages=True
3357 pmap <C-d> pager_move down=0.5 pages=True
3358 pmap <C-u> pager_move up=0.5 pages=True
3359
3360 copypmap <UP> k <C-p>
3361 copypmap <DOWN> j <C-n> <CR>
3362 copypmap <LEFT> h
3363 copypmap <RIGHT> l
3364 copypmap <HOME> g
3365 copypmap <END> G
3366 copypmap <C-d> d
3367 copypmap <C-u> u
3368 copypmap <PAGEDOWN> n f <C-F> <Space>
3369 copypmap <PAGEUP> p b <C-B>
3370
3371 # Basic
3372 pmap <ESC> pager_close
3373 copypmap <ESC> q Q i <F3>
3374 pmap E edit_file
3375
3376 # ===================================================================
3377 # == Taskview Keybindings
3378 # ===================================================================
3379
3380 # Movement
3381 tmap <up> taskview_move up=1
3382 tmap <down> taskview_move down=1
3383 tmap <home> taskview_move to=0
3384 tmap <end> taskview_move to=-1
3385 tmap <pagedown> taskview_move down=1.0 pages=True
3386 tmap <pageup> taskview_move up=1.0 pages=True
3387 tmap <C-d> taskview_move down=0.5 pages=True
3388 tmap <C-u> taskview_move up=0.5 pages=True
3389
3390 copytmap <UP> k <C-p>
3391 copytmap <DOWN> j <C-n> <CR>
3392 copytmap <HOME> g
3393 copytmap <END> G
3394 copytmap <C-u> u
3395 copytmap <PAGEDOWN> n f <C-F> <Space>
3396 copytmap <PAGEUP> p b <C-B>
3397
3398 # Changing priority and deleting tasks
3399 tmap J eval -q fm.ui.taskview.task_move(-1)
3400 tmap K eval -q fm.ui.taskview.task_move(0)
3401 tmap dd eval -q fm.ui.taskview.task_remove()
3402 tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
3403 tmap <pageup> eval -q fm.ui.taskview.task_move(0)
3404 tmap <delete> eval -q fm.ui.taskview.task_remove()
3405
3406 # Basic
3407 tmap <ESC> taskview_close
3408 copytmap <ESC> q Q w <C-c>
3409 #+end_src
3410
3411 *** scope.sh
3412 :PROPERTIES:
3413 :header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
3414 :END:
3415
3416 #+begin_src sh :tangle no
3417 # ranger supports enhanced previews. If the option "use_preview_script"
3418 # is set to True and this file exists, this script will be called and its
3419 # output is displayed in ranger. ANSI color codes are supported.
3420
3421 # NOTES: This script is considered a configuration file. If you upgrade
3422 # ranger, it will be left untouched. (You must update it yourself.)
3423 # Also, ranger disables STDIN here, so interactive scripts won't work properly
3424
3425 # Meanings of exit codes:
3426 # code | meaning | action of ranger
3427 # -----+------------+-------------------------------------------
3428 # 0 | success | success. display stdout as preview
3429 # 1 | no preview | failure. display no preview at all
3430 # 2 | plain text | display the plain content of the file
3431 # 3 | fix width | success. Don't reload when width changes
3432 # 4 | fix height | success. Don't reload when height changes
3433 # 5 | fix both | success. Don't ever reload
3434
3435 # Meaningful aliases for arguments:
3436 path="$1" # Full path of the selected file
3437 width="$2" # Width of the preview pane (number of fitting characters)
3438 height="$3" # Height of the preview pane (number of fitting characters)
3439
3440 maxln=200 # Stop after $maxln lines. Can be used like ls | head -n $maxln
3441
3442 # Find out something about the file:
3443 mimetype=$(file --mime-type -Lb "$path")
3444 extension=${path##*.}
3445
3446 # Functions:
3447 # runs a command and saves its output into $output. Useful if you need
3448 # the return value AND want to use the output in a pipe
3449 try() { output=$(eval '"$@"'); }
3450
3451 # writes the output of the previouosly used "try" command
3452 dump() { echo "$output"; }
3453
3454 # a common post-processing function used after most commands
3455 trim() { head -n "$maxln"; }
3456
3457 # wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
3458 highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }
3459
3460 case "$extension" in
3461 # Archive extensions:
3462 7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
3463 rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
3464 try als "$path" && { dump | trim; exit 0; }
3465 try acat "$path" && { dump | trim; exit 3; }
3466 try bsdtar -lf "$path" && { dump | trim; exit 0; }
3467 exit 1;;
3468 rar)
3469 try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
3470 # PDF documents:
3471 pdf)
3472 try pdftotext -l 10 -nopgbrk -q "$path" - && \
3473 { dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
3474 # BitTorrent Files
3475 torrent)
3476 try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
3477 # HTML Pages:
3478 htm|html|xhtml)
3479 try w3m -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3480 try lynx -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3481 try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3482 ;; # fall back to highlight/cat if the text browsers fail
3483 esac
3484
3485 case "$mimetype" in
3486 # Syntax highlight for text files:
3487 text/* | */xml)
3488 try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
3489 # Ascii-previews of images:
3490 image/*)
3491 img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
3492 # Display information about media files:
3493 video/* | audio/*)
3494 exiftool "$path" && exit 5
3495 # Use sed to remove spaces so the output fits into the narrow window
3496 try mediainfo "$path" && { dump | trim | sed 's/ \+:/: /;'; exit 5; } || exit 1;;
3497 esac
3498
3499 exit 1
3500 #+end_src
3501
3502 ** redshift
3503 :PROPERTIES:
3504 :header-args+: :tangle ~/.config/redshift.conf :comments none
3505 :END:
3506
3507 #+begin_src conf
3508 ; Global settings for redshift
3509 [redshift]
3510 ; Set the day and night screen temperatures (Neutral is 6500K)
3511 ;temp-day=5700
3512 ;temp-night=3500
3513
3514 ;temp-day=6500
3515 temp-day=6200
3516 ;temp-night=4800
3517 ;temp-night=5000
3518 ;temp-night=4500
3519 temp-night=4000
3520
3521 ; Enable/Disable a smooth transition between day and night
3522 ; 0 will cause a direct change from day to night screen temperature.
3523 ; 1 will gradually increase or decrease the screen temperature.
3524 transition=1
3525
3526 ; Set the screen brightness. Default is 1.0.
3527 ;brightness=0.9
3528 ; It is also possible to use different settings for day and night
3529 ; since version 1.8.
3530 ;brightness-day=0.7
3531 ;brightness-night=0.4
3532 ; Set the screen gamma (for all colors, or each color channel
3533 ; individually)
3534 ;gamma=0.8
3535 ;gamma=1.0
3536 ;gamma=0.8:0.7:0.8
3537 ; This can also be set individually for day and night since
3538 ; version 1.10.
3539 ;gamma-day=0.8:0.7:0.8
3540 ;gamma-night=0.6
3541
3542 ; Set the location-provider: 'geoclue2' or 'manual'
3543 ; type 'redshift -l list' to see possible values.
3544 ; The location provider settings are in a different section.
3545 ;location-provider=manual
3546 location-provider=geoclue2
3547
3548 ; Set the adjustment-method: 'randr', 'vidmode'
3549 ; type 'redshift -m list' to see all possible values.
3550 ; 'randr' is the preferred method, 'vidmode' is an older API.
3551 ; but works in some cases when 'randr' does not.
3552 ; The adjustment method settings are in a different section.
3553 adjustment-method=randr
3554
3555 ; Configuration of the location-provider:
3556 ; type 'redshift -l PROVIDER:help' to see the settings.
3557 ; ex: 'redshift -l manual:help'
3558 ; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
3559 ; are negative numbers.
3560 ;[manual]
3561 ;lat=48.1
3562 ;lon=11.6
3563
3564 ; Configuration of the adjustment-method
3565 ; type 'redshift -m METHOD:help' to see the settings.
3566 ; ex: 'redshift -m randr:help'
3567 ; In this example, randr is configured to adjust screen 1.
3568 ; Note that the numbering starts from 0, so this is actually the
3569 ; second screen. If this option is not specified, Redshift will try
3570 ; to adjust _all_ screens.
3571 ;[randr]
3572 ;screen=1
3573 #+end_src
3574
3575 ** rofi
3576 :PROPERTIES:
3577 :header-args+: :tangle ~/.config/rofi/config
3578 :END:
3579
3580 #+begin_src conf
3581 rofi.font: Ubuntu Mono 13
3582 ! rofi.font: Inconsolata 16
3583 ! rofi.font: Iosevka 13
3584 ! rofi.font: Source Code Pro 11
3585 rofi.modi: run,window
3586 ! rofi.width: 640
3587 rofi.width: 600
3588 !rofi.location: 2
3589 !rofi.yoffset: 200
3590 rofi.monitor: -1
3591 !rofi.lines: 10
3592
3593 !rofi.theme: /usr/share/rofi/themes//Arc.rasi
3594 !rofi.theme: /usr/share/rofi/themes//Paper.rasi
3595 !rofi.theme: /usr/share/rofi/themes//sidebar.rasi
3596
3597 rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
3598 #+end_src
3599
3600 ** rofi-pass
3601 :PROPERTIES:
3602 :header-args+: :tangle ~/.config/rofi-pass/config
3603 :END:
3604
3605 #+begin_src conf
3606 # permanently set alternative root dir
3607 # root=/path/to/root
3608
3609 # rofi command. Make sure to have "$@" as last argument
3610 _rofi () {
3611 #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
3612 rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
3613 }
3614
3615 # xdotool needs the keyboard layout to be set using setxkbmap
3616 # You can do this in your autostart scripts (e.g. xinitrc)
3617
3618 # If for some reason, you cannot do this, you can set the command here.
3619 # and set fix_layout to true
3620 fix_layout=false
3621
3622 layout_cmd () {
3623 setxkbmap us
3624 }
3625
3626 # fields to be used
3627 URL_field='url'
3628 USERNAME_field='user'
3629 AUTOTYPE_field='autotype'
3630
3631 # delay to be used for :delay keyword
3632 delay=2
3633
3634 ## Programs to be used
3635 # Editor
3636 EDITOR='gvim -f'
3637
3638 # Browser
3639 BROWSER='chromium'
3640
3641 ## Misc settings
3642
3643 default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
3644 auto_enter='false'
3645 notify='false'
3646 default_autotype='user :tab pass'
3647
3648 # color of the help messages
3649 # leave empty for autodetection
3650 help_color="#4872FF"
3651
3652 # Clipboard settings
3653 # Possible options: primary, clipboard, both
3654 clip=primary
3655
3656 # Options for generating new password entries
3657 # default_user is also used for password files that have no user field.
3658 default_user=aminb
3659 default_user2=aminban
3660 password_length=30
3661
3662 # Custom Keybindings
3663 #autotype="Alt+1"
3664 autotype="Alt+m"
3665 type_user="Alt+2"
3666 type_pass="Alt+3"
3667 open_url="Alt+4"
3668 copy_name="Alt+u"
3669 copy_url="Alt+l"
3670 copy_pass="Alt+p"
3671 show="Alt+o"
3672 copy_entry="Alt+2"
3673 type_entry="Alt+1"
3674 copy_menu="Alt+c"
3675 action_menu="Alt+a"
3676 type_menu="Alt+t"
3677 help="Alt+h"
3678 switch="Alt+x"
3679 insert_pass="Alt+n"
3680 #+end_src
3681
3682 ** sway
3683 :PROPERTIES:
3684 :header-args+: :tangle ~/.config/sway/config
3685 :END:
3686
3687 #+begin_src conf
3688 exec xrdb .Xresources
3689 exec dunst
3690 ### Variables
3691 # super
3692 set $mod Mod4
3693 # alt
3694 set $mod2 Mod1
3695 set $left h
3696 set $down j
3697 set $up k
3698 set $right l
3699 set $term urxvt
3700 set $menu rofi -show run -display-run '> ' -display-window ' 🗔 '
3701
3702 ### Output configuration
3703 #
3704 # Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/)
3705 output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
3706 #
3707 # Example configuration:
3708 #
3709 # output HDMI-A-1 resolution 1920x1080 position 1920,0
3710 #
3711 # You can get the names of your outputs by running: swaymsg -t get_outputs
3712
3713 ### Idle configuration
3714 #
3715 # Example configuration:
3716 #
3717 #exec swayidle \
3718 # timeout 300 'swaylock -c 000000' \
3719 # timeout 600 'swaymsg "output * dpms off"' \
3720 # resume 'swaymsg "output * dpms on"' \
3721 # before-sleep 'swaylock -c 000000'
3722 #
3723 # This will lock your screen after 300 seconds of inactivity, then turn off
3724 # your displays after another 600 seconds, and turn your screens back on when
3725 # resumed. It will also lock your screen before your computer goes to sleep.
3726
3727 ### Input configuration
3728
3729 input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
3730 dwt enabled
3731 tap enabled
3732 natural_scroll enabled
3733 middle_emulation enabled
3734 click_method clickfinger
3735 }
3736
3737 input "1:1:AT_Translated_Set_2_keyboard" {
3738 repeat_delay 200
3739 repeat_rate 45
3740 xkb_layout us,ir
3741 xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
3742 }
3743
3744
3745 ### Key bindings
3746 #
3747 # Basics:
3748 #
3749 # start a terminal
3750 bindsym $mod+Return exec $term
3751
3752 # kill focused window
3753 bindsym $mod+Shift+q kill
3754
3755 # start your launcher
3756 bindsym $mod+d exec $menu
3757
3758 # Drag floating windows by holding down $mod and left mouse button.
3759 # Resize them with right mouse button + $mod.
3760 # Despite the name, also works for non-floating windows.
3761 # Change normal to inverse to use left mouse button for resizing and right
3762 # mouse button for dragging.
3763 floating_modifier $mod normal
3764
3765 # reload the configuration file
3766 bindsym $mod+Shift+c reload
3767
3768 # exit sway (logs you out of your wayland session)
3769 bindsym $mod+Shift+e exit
3770
3771 bindsym $mod+apostrophe exec rofi-light # rofi-based brightness chooser
3772 bindsym XF86MonBrightnessUp exec light -A 5 # increase screen brightness
3773 bindsym XF86MonBrightnessDown exec light -U 5 # decrease screen brightness
3774
3775 bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
3776 bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
3777 bindsym XF86AudioMute exec pamixer --toggle-mute
3778 bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
3779
3780 # original sway workspace switch and window move
3781 bindsym $mod+bracketleft workspace prev
3782 bindsym $mod+bracketright workspace next
3783 bindsym $mod+braceleft move container to workspace prev
3784 bindsym $mod+braceright move container to workspace next
3785
3786 # bspwm-esque workspace switch and window move
3787 bindsym $mod2+bracketleft exec sway-ws-util switch prev
3788 bindsym $mod2+bracketright exec sway-ws-util switch next
3789 bindsym $mod2+braceleft exec sway-ws-util move prev follow
3790 bindsym $mod2+braceright exec sway-ws-util move next follow
3791 #
3792 # Moving around:
3793 #
3794 # Move your focus around
3795 bindsym $mod+$left focus left
3796 bindsym $mod+$down focus down
3797 bindsym $mod+$up focus up
3798 bindsym $mod+$right focus right
3799 # or use $mod+[up|down|left|right]
3800 bindsym $mod+Left focus left
3801 bindsym $mod+Down focus down
3802 bindsym $mod+Up focus up
3803 bindsym $mod+Right focus right
3804
3805 # _move_ the focused window with the same, but add Shift
3806 bindsym $mod+Shift+$left move left
3807 bindsym $mod+Shift+$down move down
3808 bindsym $mod+Shift+$up move up
3809 bindsym $mod+Shift+$right move right
3810 # ditto, with arrow keys
3811 bindsym $mod+Shift+Left move left
3812 bindsym $mod+Shift+Down move down
3813 bindsym $mod+Shift+Up move up
3814 bindsym $mod+Shift+Right move right
3815 #
3816 # Workspaces:
3817 #
3818 # switch to workspace
3819 bindsym $mod+1 workspace 1
3820 bindsym $mod+2 workspace 2
3821 bindsym $mod+3 workspace 3
3822 bindsym $mod+4 workspace 4
3823 bindsym $mod+5 workspace 5
3824 bindsym $mod+6 workspace 6
3825 bindsym $mod+7 workspace 7
3826 bindsym $mod+8 workspace 8
3827 bindsym $mod+9 workspace 9
3828 bindsym $mod+0 workspace 10
3829 # move focused container to workspace
3830 bindsym $mod+Shift+1 move container to workspace 1
3831 bindsym $mod+Shift+2 move container to workspace 2
3832 bindsym $mod+Shift+3 move container to workspace 3
3833 bindsym $mod+Shift+4 move container to workspace 4
3834 bindsym $mod+Shift+5 move container to workspace 5
3835 bindsym $mod+Shift+6 move container to workspace 6
3836 bindsym $mod+Shift+7 move container to workspace 7
3837 bindsym $mod+Shift+8 move container to workspace 8
3838 bindsym $mod+Shift+9 move container to workspace 9
3839 bindsym $mod+Shift+0 move container to workspace 10
3840 # Note: workspaces can have any name you want, not just numbers.
3841 # We just use 1-10 as the default.
3842 #
3843 # Layout stuff:
3844 #
3845 # You can "split" the current object of your focus with
3846 # $mod+b or $mod+v, for horizontal and vertical splits
3847 # respectively.
3848 bindsym $mod+b splith
3849 bindsym $mod+v splitv
3850
3851 # Switch the current container between different layout styles
3852 bindsym $mod+s layout stacking
3853 bindsym $mod+w layout tabbed
3854 bindsym $mod+e layout toggle split
3855
3856 # Make the current focus fullscreen
3857 bindsym $mod+f fullscreen
3858
3859 # Toggle the current focus between tiling and floating mode
3860 bindsym $mod+Shift+space floating toggle
3861
3862 # Swap focus between the tiling area and the floating area
3863 bindsym $mod+space focus mode_toggle
3864
3865 # move focus to the parent container
3866 bindsym $mod+a focus parent
3867 #
3868 # Scratchpad:
3869 #
3870 # Sway has a "scratchpad", which is a bag of holding for windows.
3871 # You can send windows there and get them back later.
3872
3873 # Move the currently focused window to the scratchpad
3874 bindsym $mod+Shift+minus move scratchpad
3875
3876 # Show the next scratchpad window or hide the focused scratchpad window.
3877 # If there are multiple scratchpad windows, this command cycles through them.
3878 bindsym $mod+minus scratchpad show
3879 #
3880 # Resizing containers:
3881 #
3882 mode "resize" {
3883 # left will shrink the containers width
3884 # right will grow the containers width
3885 # up will shrink the containers height
3886 # down will grow the containers height
3887 bindsym $left resize shrink width 10px
3888 bindsym $down resize grow height 10px
3889 bindsym $up resize shrink height 10px
3890 bindsym $right resize grow width 10px
3891
3892 # ditto, with arrow keys
3893 bindsym Left resize shrink width 10px
3894 bindsym Down resize grow height 10px
3895 bindsym Up resize shrink height 10px
3896 bindsym Right resize grow width 10px
3897
3898 # return to default mode
3899 bindsym Return mode "default"
3900 bindsym Escape mode "default"
3901 }
3902 bindsym $mod+Shift+r mode "resize"
3903
3904 #
3905 # Status Bar:
3906 #
3907 # Read `man 5 sway-bar` for more information about this section.
3908 bar {
3909 position bottom
3910 colors {
3911 statusline #ffffff
3912 background #323232
3913 inactive_workspace #32323200 #32323200 #5c5c5c
3914 }
3915 status_command i3gs ~/.config/i3gs/config
3916 }
3917
3918 include /etc/sway/config.d/*
3919 #+end_src
3920
3921 ** TLP
3922
3923 *** TODO enigma
3924 *** plasma
3925
3926 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/default/tlp")
3927 # ------------------------------------------------------------------------------
3928 # tlp - Parameters for power saving
3929 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
3930
3931 # Hint: some features are disabled by default, remove the leading # to enable
3932 # them.
3933
3934 # Set to 0 to disable, 1 to enable TLP.
3935 TLP_ENABLE=1
3936
3937 # Operation mode when no power supply can be detected: AC, BAT.
3938 # Concerns some desktop and embedded hardware only.
3939 TLP_DEFAULT_MODE=AC
3940
3941 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
3942 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
3943 TLP_PERSISTENT_DEFAULT=0
3944
3945 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
3946 # Non-zero value enables, zero disables laptop mode.
3947 DISK_IDLE_SECS_ON_AC=0
3948 DISK_IDLE_SECS_ON_BAT=2
3949
3950 # Dirty page values (timeouts in secs).
3951 MAX_LOST_WORK_SECS_ON_AC=15
3952 MAX_LOST_WORK_SECS_ON_BAT=60
3953
3954 # Hint: CPU parameters below are disabled by default, remove the leading #
3955 # to enable them, otherwise kernel default values are used.
3956
3957 # Select a CPU frequency scaling governor.
3958 # Intel Core i processor with intel_pstate driver:
3959 # powersave(*), performance.
3960 # Older hardware with acpi-cpufreq driver:
3961 # ondemand(*), powersave, performance, conservative, schedutil.
3962 # (*) is recommended.
3963 # Hint: use tlp-stat -p to show the active driver and available governors.
3964 # Important:
3965 # powersave for intel_pstate and ondemand for acpi-cpufreq are power
3966 # efficient for *almost all* workloads and therefore kernel and most
3967 # distributions have chosen them as defaults. If you still want to change,
3968 # you should know what you're doing! You *must* disable your distribution's
3969 # governor settings or conflicts will occur.
3970 #CPU_SCALING_GOVERNOR_ON_AC=powersave
3971 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
3972
3973 # Set the min/max frequency available for the scaling governor.
3974 # Possible values strongly depend on your CPU. For available frequencies see
3975 # the output of tlp-stat -p.
3976 #CPU_SCALING_MIN_FREQ_ON_AC=0
3977 #CPU_SCALING_MAX_FREQ_ON_AC=0
3978 #CPU_SCALING_MIN_FREQ_ON_BAT=0
3979 #CPU_SCALING_MAX_FREQ_ON_BAT=0
3980
3981 # Set energy performance hints (HWP) for Intel P-state governor:
3982 # performance, balance_performance, default, balance_power, power
3983 # Values are given in order of increasing power saving.
3984 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
3985 CPU_HWP_ON_AC=balance_performance
3986 CPU_HWP_ON_BAT=balance_power
3987
3988 # Set Intel P-state performance: 0..100 (%).
3989 # Limit the max/min P-state to control the power dissipation of the CPU.
3990 # Values are stated as a percentage of the available performance.
3991 # Requires an Intel Core i processor with intel_pstate driver.
3992 #CPU_MIN_PERF_ON_AC=0
3993 #CPU_MAX_PERF_ON_AC=100
3994 #CPU_MIN_PERF_ON_BAT=0
3995 #CPU_MAX_PERF_ON_BAT=30
3996
3997 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
3998 # Requires an Intel Core i processor.
3999 # Important:
4000 # - This may conflict with your distribution's governor settings
4001 # - A value of 1 does *not* activate boosting, it just allows it
4002 #CPU_BOOST_ON_AC=1
4003 #CPU_BOOST_ON_BAT=0
4004
4005 # Minimize number of used CPU cores/hyper-threads under light load conditions:
4006 # 0=disable, 1=enable.
4007 SCHED_POWERSAVE_ON_AC=0
4008 SCHED_POWERSAVE_ON_BAT=1
4009
4010 # Kernel NMI Watchdog:
4011 # 0=disable (default, saves power), 1=enable (for kernel debugging only).
4012 NMI_WATCHDOG=0
4013
4014 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
4015 # Frequency voltage pairs are written to:
4016 # /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
4017 # CAUTION: only use this, if you thoroughly understand what you are doing!
4018 #PHC_CONTROLS="F:V F:V F:V F:V"
4019
4020 # Set CPU performance versus energy savings policy:
4021 # performance, balance-performance, default, balance-power, power.
4022 # Values are given in order of increasing power saving.
4023 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
4024 ENERGY_PERF_POLICY_ON_AC=performance
4025 ENERGY_PERF_POLICY_ON_BAT=balance-power
4026
4027 # Disk devices; separate multiple devices with spaces (default: sda).
4028 # Devices can be specified by disk ID also (lookup with: tlp diskid).
4029 DISK_DEVICES="sda sdb"
4030
4031 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
4032 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
4033 # Separate values for multiple disks with spaces. Use the special value 'keep'
4034 # to keep the hardware default for the particular disk.
4035 DISK_APM_LEVEL_ON_AC="254 254"
4036 DISK_APM_LEVEL_ON_BAT="128 128"
4037
4038 # Hard disk spin down timeout:
4039 # 0: spin down disabled
4040 # 1..240: timeouts from 5s to 20min (in units of 5s)
4041 # 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
4042 # See 'man hdparm' for details.
4043 # Separate values for multiple disks with spaces. Use the special value 'keep'
4044 # to keep the hardware default for the particular disk.
4045 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
4046 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
4047
4048 # Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
4049 # Separate values for multiple disks with spaces. Use the special value 'keep'
4050 # to keep the kernel default scheduler for the particular disk.
4051 #DISK_IOSCHED="cfq cfq"
4052
4053 # AHCI link power management (ALPM) for disk devices:
4054 # min_power, med_power_with_dipm(*), medium_power, max_performance.
4055 # (*) Kernel >= 4.15 required, then recommended.
4056 # Multiple values separated with spaces are tried sequentially until success.
4057 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
4058 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
4059
4060 # Exclude host devices from AHCI link power management.
4061 # Separate multiple hosts with spaces.
4062 #SATA_LINKPWR_BLACKLIST="host1"
4063
4064 # Runtime Power Management for AHCI host and disks devices:
4065 # on=disable, auto=enable.
4066 # EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
4067 #AHCI_RUNTIME_PM_ON_AC=on
4068 #AHCI_RUNTIME_PM_ON_BAT=on
4069
4070 # Seconds of inactivity before disk is suspended.
4071 AHCI_RUNTIME_PM_TIMEOUT=15
4072
4073 # PCI Express Active State Power Management (PCIe ASPM):
4074 # default, performance, powersave.
4075 PCIE_ASPM_ON_AC=performance
4076 PCIE_ASPM_ON_BAT=powersave
4077
4078 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
4079 # auto = mid on BAT, high on AC; default = use hardware defaults.
4080 RADEON_POWER_PROFILE_ON_AC=high
4081 RADEON_POWER_PROFILE_ON_BAT=low
4082
4083 # Radeon dynamic power management method (DPM): battery, performance.
4084 RADEON_DPM_STATE_ON_AC=performance
4085 RADEON_DPM_STATE_ON_BAT=battery
4086
4087 # Radeon DPM performance level: auto, low, high; auto is recommended.
4088 RADEON_DPM_PERF_LEVEL_ON_AC=auto
4089 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4090
4091 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4092 WIFI_PWR_ON_AC=off
4093 WIFI_PWR_ON_BAT=on
4094
4095 # Disable wake on LAN: Y/N.
4096 WOL_DISABLE=Y
4097
4098 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4099 # A value of 0 disables, >=1 enables power saving (recommended: 1).
4100 SOUND_POWER_SAVE_ON_AC=0
4101 SOUND_POWER_SAVE_ON_BAT=0
4102
4103 # Disable controller too (HDA only): Y/N.
4104 SOUND_POWER_SAVE_CONTROLLER=N
4105
4106 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4107 # Drive can be powered on again by releasing (and reinserting) the eject lever
4108 # or by pressing the disc eject button on newer models.
4109 # Note: an UltraBay/MediaBay hard disk is never powered off.
4110 BAY_POWEROFF_ON_AC=0
4111 BAY_POWEROFF_ON_BAT=0
4112 # Optical drive device to power off (default sr0).
4113 BAY_DEVICE="sr0"
4114
4115 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4116 RUNTIME_PM_ON_AC=on
4117 RUNTIME_PM_ON_BAT=auto
4118
4119 # Exclude PCI(e) device adresses the following list from Runtime PM
4120 # (separate with spaces). Use lspci to get the adresses (1st column).
4121 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4122 RUNTIME_PM_BLACKLIST="01:00.0"
4123
4124 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4125 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4126 # prevents accidential power-on of dGPU in hybrid graphics setups.
4127 # Use "" to disable the feature completely.
4128 # Separate multiple drivers with spaces.
4129 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4130
4131 # Set to 0 to disable, 1 to enable USB autosuspend feature.
4132 USB_AUTOSUSPEND=1
4133
4134 # Exclude listed devices from USB autosuspend (separate with spaces).
4135 # Use lsusb to get the ids.
4136 # Note: input devices (usbhid) are excluded automatically
4137 #USB_BLACKLIST="1111:2222 3333:4444"
4138
4139 # Bluetooth devices are excluded from USB autosuspend:
4140 # 0=do not exclude, 1=exclude.
4141 USB_BLACKLIST_BTUSB=0
4142
4143 # Phone devices are excluded from USB autosuspend:
4144 # 0=do not exclude, 1=exclude (enable charging).
4145 USB_BLACKLIST_PHONE=0
4146
4147 # Printers are excluded from USB autosuspend:
4148 # 0=do not exclude, 1=exclude.
4149 USB_BLACKLIST_PRINTER=1
4150
4151 # WWAN devices are excluded from USB autosuspend:
4152 # 0=do not exclude, 1=exclude.
4153 USB_BLACKLIST_WWAN=1
4154
4155 # Include listed devices into USB autosuspend even if already excluded
4156 # by the blacklists above (separate with spaces).
4157 # Use lsusb to get the ids.
4158 #USB_WHITELIST="1111:2222 3333:4444"
4159
4160 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4161 # (workaround for USB devices that cause shutdown problems).
4162 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4163
4164 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4165 # on system startup: 0=disable, 1=enable.
4166 # Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4167 # are ignored when this is enabled!
4168 #RESTORE_DEVICE_STATE_ON_STARTUP=0
4169 RESTORE_DEVICE_STATE_ON_STARTUP=1
4170
4171 # Radio devices to disable on startup: bluetooth, wifi, wwan.
4172 # Separate multiple devices with spaces.
4173 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
4174
4175 # Radio devices to enable on startup: bluetooth, wifi, wwan.
4176 # Separate multiple devices with spaces.
4177 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4178
4179 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4180 # (workaround for devices that are blocking shutdown).
4181 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4182
4183 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4184 # (to prevent other operating systems from missing radios).
4185 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4186
4187 # Radio devices to enable on AC: bluetooth, wifi, wwan.
4188 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4189
4190 # Radio devices to disable on battery: bluetooth, wifi, wwan.
4191 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4192
4193 # Radio devices to disable on battery when not in use (not connected):
4194 # bluetooth, wifi, wwan.
4195 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4196
4197 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4198 # required). Charging starts when the remaining capacity falls below the
4199 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4200 # Main / Internal battery (values in %)
4201 #START_CHARGE_THRESH_BAT0=75
4202 #STOP_CHARGE_THRESH_BAT0=80
4203 # Ultrabay / Slice / Replaceable battery (values in %)
4204 #START_CHARGE_THRESH_BAT1=75
4205 #STOP_CHARGE_THRESH_BAT1=80
4206
4207 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4208 #RESTORE_THRESHOLDS_ON_BAT=1
4209
4210 # ------------------------------------------------------------------------------
4211 # tlp-rdw - Parameters for the radio device wizard
4212 # Possible devices: bluetooth, wifi, wwan.
4213
4214 # Hints:
4215 # - Parameters are disabled by default, remove the leading # to enable them
4216 # - Separate multiple radio devices with spaces
4217
4218 # Radio devices to disable on connect.
4219 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4220 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4221 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4222
4223 # Radio devices to enable on disconnect.
4224 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4225 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4226 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4227
4228 # Radio devices to enable/disable when docked.
4229 #DEVICES_TO_ENABLE_ON_DOCK=""
4230 #DEVICES_TO_DISABLE_ON_DOCK=""
4231
4232 # Radio devices to enable/disable when undocked.
4233 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4234 #DEVICES_TO_DISABLE_ON_UNDOCK=""
4235 #+end_src
4236
4237 ** X
4238
4239 *** xprofile
4240 :PROPERTIES:
4241 :header-args+: :tangle ~/.xprofile
4242 :END:
4243
4244 =~/.xprofile= is similar in style to =~/.xinitrc=, but on the
4245 contrary, it's automatically sourced by LightDM, my display manager of
4246 choice.
4247
4248 #+begin_src sh :tangle no
4249 xset -b # disable bell
4250 xset r rate 200 45 # repeat delay (ms) and rate (repeats/sec)
4251
4252 # setxkbmap -option compose:ralt
4253
4254 setxkbmap -option ctrl:nocaps # turn capslock into control
4255 setxkbmap -option altwin:swap_alt_win # swap alt and super
4256
4257 if [ $(hostname) = "plasma" ]
4258 then
4259 setxkbmap -option ctrl:rctrl_ralt # turn right control into right alt
4260 fi
4261
4262 if [ $(hostname) = "enigma" ]
4263 then
4264 xmodmap -e "keycode 135 = Alt_R" # remap menu key to alt
4265 fi
4266
4267 light -Scrs "intel_backlight" 2
4268
4269 source $HOME/.zprofile
4270
4271 export _JAVA_AWT_WM_NONREPARENTING=1
4272 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4273
4274 if [ $(hostname) = "plasma" ]
4275 then
4276 unlock-def-gk.py &
4277 fi
4278
4279 bspwm &
4280 #+end_src
4281
4282 *** X resources
4283
4284 **** Xresources
4285 :PROPERTIES:
4286 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
4287 :END:
4288
4289 #+begin_src conf-xdefaults
4290 #include ".Xresources.d/fonts"
4291 ! #include ".Xresources.d/colors"
4292 #include ".Xresources.d/emacs"
4293 #include ".Xresources.d/rxvt-unicode"
4294 #+end_src
4295
4296 **** Xresources.d
4297
4298 ***** fonts
4299 :PROPERTIES:
4300 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
4301 :END:
4302
4303 #+begin_src conf-xdefaults
4304 Xft.lcdfilter: lcddefault
4305 Xft.antialias: true
4306 Xft.autohint: 0
4307 Xft.hinting: true
4308 Xft.hintstyle: hintslight
4309 ! Xft.hintstyle: hintfull
4310 Xft.rgba: rgb
4311 Xft.dpi: 96
4312 #+end_src
4313
4314 ***** colors
4315 :PROPERTIES:
4316 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
4317 :END:
4318
4319 #+begin_src conf-xdefaults :tangle no
4320 #include "gruvbox-light.xresources"
4321 ! #include "gruvbox-dark.xresources"
4322 #include "gruvbox-urxvt256.xresources"
4323 #+end_src
4324
4325 #+begin_src conf-xdefaults :tangle no
4326 ! -----------------------------------------------------------------------------
4327 ! File: gruvbox-light.xresources
4328 ! Description: Retro groove colorscheme generalized
4329 ! Author: morhetz <morhetz@gmail.com>
4330 ! Source: https://github.com/morhetz/gruvbox-generalized
4331 ! Last Modified: 6 Sep 2014
4332 ! -----------------------------------------------------------------------------
4333
4334 ! hard contrast: *background: #f9f5d7
4335 *background: #fbf1c7
4336 ! soft contrast: *background: #f2e5bc
4337 *foreground: #3c3836
4338 ! Black + DarkGrey
4339 *color0: #fdf4c1
4340 *color8: #928374
4341 ! DarkRed + Red
4342 *color1: #cc241d
4343 *color9: #9d0006
4344 ! DarkGreen + Green
4345 *color2: #98971a
4346 *color10: #79740e
4347 ! DarkYellow + Yellow
4348 *color3: #d79921
4349 *color11: #b57614
4350 ! DarkBlue + Blue
4351 *color4: #458588
4352 *color12: #076678
4353 ! DarkMagenta + Magenta
4354 *color5: #b16286
4355 *color13: #8f3f71
4356 ! DarkCyan + Cyan
4357 *color6: #689d6a
4358 *color14: #427b58
4359 ! LightGrey + White
4360 *color7: #7c6f64
4361 *color15: #3c3836
4362 #+end_src
4363
4364 #+begin_src conf-xdefaults :tangle no
4365 ! -----------------------------------------------------------------------------
4366 ! File: gruvbox-dark.xresources
4367 ! Description: Retro groove colorscheme generalized
4368 ! Author: morhetz <morhetz@gmail.com>
4369 ! Source: https://github.com/morhetz/gruvbox-generalized
4370 ! Last Modified: 6 Sep 2014
4371 ! -----------------------------------------------------------------------------
4372
4373 ! hard contrast: *background: #1d2021
4374 *background: #282828
4375 ! soft contrast: *background: #32302f
4376 *foreground: #ebdbb2
4377 ! Black + DarkGrey
4378 *color0: #282828
4379 *color8: #928374
4380 ! DarkRed + Red
4381 *color1: #cc241d
4382 *color9: #fb4934
4383 ! DarkGreen + Green
4384 *color2: #98971a
4385 *color10: #b8bb26
4386 ! DarkYellow + Yellow
4387 *color3: #d79921
4388 *color11: #fabd2f
4389 ! DarkBlue + Blue
4390 *color4: #458588
4391 *color12: #83a598
4392 ! DarkMagenta + Magenta
4393 *color5: #b16286
4394 *color13: #d3869b
4395 ! DarkCyan + Cyan
4396 *color6: #689d6a
4397 *color14: #8ec07c
4398 ! LightGrey + White
4399 *color7: #a89984
4400 *color15: #ebdbb2
4401 #+end_src
4402
4403 #+begin_src conf-xdefaults :tangle no
4404 ! -----------------------------------------------------------------------------
4405 ! File: gruvbox-urxvt256.xresources
4406 ! Description: Retro groove colorscheme generalized
4407 ! Author: morhetz <morhetz@gmail.com>
4408 ! Source: https://github.com/morhetz/gruvbox-generalized
4409 ! Last Modified: 13 Dec 2013
4410 ! -----------------------------------------------------------------------------
4411
4412 URxvt.color24: #076678
4413 URxvt.color66: #427b58
4414 URxvt.color88: #9d0006
4415 URxvt.color96: #8f3f71
4416 URxvt.color100: #79740e
4417 URxvt.color108: #8ec07c
4418 URxvt.color109: #83a598
4419 URxvt.color130: #af3a03
4420 URxvt.color136: #b57614
4421 URxvt.color142: #b8bb26
4422 URxvt.color167: #fb4934
4423 URxvt.color175: #d3869b
4424 URxvt.color208: #fe8019
4425 URxvt.color214: #fabd2f
4426 URxvt.color223: #ebdbb2
4427 URxvt.color228: #f2e5bc
4428 URxvt.color229: #fbf1c7
4429 URxvt.color230: #f9f5d7
4430 URxvt.color234: #1d2021
4431 URxvt.color235: #282828
4432 URxvt.color236: #32302f
4433 URxvt.color237: #3c3836
4434 URxvt.color239: #504945
4435 URxvt.color241: #665c54
4436 URxvt.color243: #7c6f64
4437 URxvt.color244: #928374
4438 URxvt.color245: #928374
4439 URxvt.color246: #a89984
4440 URxvt.color248: #bdae93
4441 URxvt.color250: #d5c4a1
4442 #+end_src
4443
4444 ***** emacs
4445 :PROPERTIES:
4446 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
4447 :END:
4448
4449 #+begin_src conf-xdefaults
4450 Emacs.menuBar: off
4451 Emacs.toolBar: off
4452 Emacs.verticalScrollBars: off
4453 Emacs.cursorBlink: off
4454 Emacs.FontBackend: xft,x
4455 ! Emacs.font: Ubuntu Mono-12
4456 ! Emacs.font: Triplicate T4C-11
4457 ! Emacs.font: Ubuntu Mono-10.5
4458 ! Emacs.font: Ubuntu Mono-12
4459 ! Emacs.font: Iosevka-11
4460
4461 ! Emacs.font: Fira Mono:size=15
4462 ! Emacs.font: DejaVu Sans Mono:size=15
4463 ! Emacs.font: Inconsolata:size=17
4464 ! Emacs.font: Inconsolata:size=16
4465 ! Emacs.font: Inconsolata LGC:size=14
4466 ! Emacs.font: Source Code Pro Medium-10.5
4467 Emacs.font: Ubuntu Mono:size=16
4468 ! Emacs.font: Iosevka:size=16
4469 #+end_src
4470
4471 ***** rxvt-unicode
4472 :PROPERTIES:
4473 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
4474 :END:
4475
4476 #+begin_src conf-xdefaults
4477 ! Font
4478 URxvt.font: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
4479 URxvt.boldFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
4480 URxvt.italicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
4481 URxvt.bolditalicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
4482
4483 URxvt.xftAntialias: true
4484 URxvt.letterSpace: 0
4485
4486 URxvt.depth: 0
4487 URxvt.loginShell: true
4488 URxvt.saveLines: 100000
4489 URxvt.internalBorder: 3
4490 URxvt.lineSpace: 0
4491 URxvt.scrollBar: false
4492 URxvt.scrollStyle: rxvt
4493 URxvt*scrollTtyOutput: false
4494 URxvt*scrollWithBuffer: true
4495 URxvt*scrollTtyKeypress: true
4496 URxvt.keysym.Shift-Up: command:\033]720;1\007
4497 URxvt.keysym.Shift-Down: command:\033]721;1\007
4498
4499 URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select
4500 URxvt.perl-ext: bidi
4501 URxvt.bidi.enabled: 1
4502 URxvt.url-select.launcher: firefox
4503 URxvt.url-select.underline: true
4504 URxvt.keysym.M-u: perl:url-select:select_next
4505 URxvt.keysym.M-Escape: perl:keyboard-select:activate
4506 URxvt.keysym.M-s: perl:keyboard-select:search
4507 URxvt.url-launcher: /usr/bin/firefox
4508 URxvt.matcher.button: 1
4509 URxvt.iso14755: false
4510 URxvt.iso14755_53: false
4511 URxvt.keysym.M-c: perl:clipboard:copy
4512 URxvt.keysym.M-v: perl:clipboard:paste
4513 URxvt.keysym.C-A-V: perl:clipboard:paste_escaped
4514 URxvt.keysym.C-Up: font-size:increase
4515 URxvt.keysym.C-Down: font-size:decrease
4516 URxvt.keysym.C-S-Up: font-size:incglobal
4517 URxvt.keysym.C-S-Down: font-size:decglobal
4518 URxvt.keysym.C-equal: font-size:reset
4519 !URxvt.keysym.C-question: font-size:show
4520
4521 URxvt.iconFile: /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
4522
4523 !urxvt*foreground: white
4524 !urxvt*background: black
4525
4526 !*color0: #2E3436
4527 !*color1: #a40000
4528 !*color2: #4E9A06
4529 !*color3: #C4A000
4530 !*color4: #3465A4
4531 !*color5: #75507B
4532 !*color6: #ce5c00
4533 !*color7: #babdb9
4534 !*color8: #555753
4535 !*color9: #EF2929
4536 !*color10: #8AE234
4537 !*color11: #FCE94F
4538 !*color12: #729FCF
4539 !*color13: #AD7FA8
4540 !*color14: #fcaf3e
4541 !*color15: #EEEEEC
4542
4543 !URxvt.foreground: #C8C8C8
4544 !URxvt.background: #FFFFFF
4545
4546 !! black
4547 !*color0: #2E3436
4548 !*color8: #555753
4549 !! red
4550 !*color1: #a40000
4551 !*color9: #EF2929
4552 !! green
4553 !*color2: #4E9A06
4554 !*color10: #8AE234
4555 !! yellow
4556 !*color3: #C4A000
4557 !*color11: #FCE94F
4558 !! blue
4559 !*color4: #3465A4
4560 !*color12: #729FCF
4561 !! purple
4562 !*color5: #75507B
4563 !*color13: #AD7FA8
4564 !! orange (replaces cyan)
4565 !*color6: #ce5c00
4566 !*color14: #fcaf3e
4567 !! white
4568 !*color7: #babdb9
4569 !*color15: #EEEEEC
4570
4571 ! Tango colour theme for rxvt-unicode
4572 URxvt.background: #FFFFFF
4573 URxvt.foreground: #000000
4574
4575 ! Black
4576 URxvt.color0: #2E3436
4577 URxvt.color8: #757773
4578
4579 ! Red
4580 URxvt.color1: #CC0000
4581 URxvt.color9: #EF2929
4582
4583 ! Green
4584 URxvt.color2: #4E9A06
4585 URxvt.color10: #8AE234
4586
4587 ! Yellow
4588 URxvt.color3: #C4A000
4589 URxvt.color11: #FCE94F
4590
4591 ! Blue
4592 URxvt.color4: #3465A4
4593 URxvt.color12: #729FCF
4594
4595 ! Magenta
4596 URxvt.color5: #75507B
4597 URxvt.color13: #AD7FA8
4598
4599 !! Cyan
4600 !URxvt.color6: #06989A
4601 !URxvt.color14: #34E2E2
4602 ! orange (replaces cyan)
4603 *color6: #ce5c00
4604 *color14: #fcaf3e
4605
4606 ! White
4607 URxvt.color7: #D3D7CF
4608 URxvt.color15: #EEEEEC
4609 #+end_src
4610
4611 ** XDG
4612 :PROPERTIES:
4613 :header-args+: :tangle ~/.config/user-dirs.dirs
4614 :END:
4615
4616 #+begin_src conf
4617 XDG_DESKTOP_DIR="$HOME/Desktop"
4618 XDG_DOCUMENTS_DIR="$HOME/usr/docs"
4619 XDG_DOWNLOAD_DIR="$HOME/usr/dls"
4620 XDG_MUSIC_DIR="$HOME/usr/music"
4621 XDG_PICTURES_DIR="$HOME/usr/pics"
4622 XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
4623 XDG_TEMPLATES_DIR="$HOME/usr/Templates"
4624 XDG_VIDEOS_DIR="$HOME/usr/vids"
4625 #+end_src
4626
4627 ** Zathura
4628 :PROPERTIES:
4629 :header-args+: :tangle ~/.config/zathura/zathurarc
4630 :END:
4631
4632 #+begin_src conf
4633 set smooth-scroll true
4634 set selection-clipboard clipboard
4635 set zoom-step 05
4636 set default-bg "#272727"
4637 set statusbar-bg "#272727"
4638 set inputbar-bg "#373737"
4639 #+end_src
4640
4641 ** Zsh
4642
4643 My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
4644 [[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
4645 installed.
4646
4647 *** zimrc
4648 :PROPERTIES:
4649 :header-args+: :tangle ~/.zimrc
4650 :END:
4651
4652 #+begin_src sh
4653
4654
4655 #################
4656 # CORE SETTINGS #
4657 #################
4658
4659 #
4660 # Zim settings
4661 #
4662
4663 # Select what modules you would like enabled.
4664 # The second line of modules may depend on options set by modules in the first
4665 # line. These dependencies are noted on the respective module's README.md.
4666 zmodules=(directory environment git git-info history input ssh utility custom \
4667 syntax-highlighting history-substring-search prompt completion)
4668
4669
4670 ###################
4671 # MODULE SETTINGS #
4672 ###################
4673
4674 #
4675 # Prompt
4676 #
4677
4678 # Set your desired prompt here
4679 zprompt_theme='pure'
4680 #PURE_PROMPT_SYMBOL=λ
4681 #PURE_PROMPT_SYMBOL=δ
4682 PURE_PROMPT_SYMBOL=➜
4683
4684 #
4685 # Completion
4686 #
4687
4688 # set an optional host-specific filename for the completion cache file
4689 # if none is provided, the default '.zcompdump' is used.
4690 #zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
4691
4692 #
4693 # Utility
4694 #
4695
4696 # Uncomment to enable command correction prompts
4697 # See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
4698 setopt CORRECT
4699
4700 #
4701 # Environment
4702 #
4703
4704 # Set the string below to the desired terminal title format string.
4705 # The terminal title is redrawn upon directory change, however, variables like
4706 # ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
4707 # http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
4708 # The example below uses the following format: 'username@host:/current/directory'
4709 ztermtitle='%n@%m:%~'
4710
4711 #
4712 # Input
4713 #
4714
4715 # Uncomment to enable double-dot expansion.
4716 # This appends '../' to your input for each '.' you type after an initial '..'
4717 #zdouble_dot_expand='true'
4718
4719 #
4720 # Syntax-Highlighting
4721 #
4722
4723 # This determines what highlighters will be used with the syntax-highlighting module.
4724 # Documentation of the highlighters can be found here:
4725 # https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
4726 # For (u)rxvt, termite and gnome-terminal users,
4727 # removing the 'cursor' highlighter will fix the disappearing cursor problem
4728 #zhighlighters=(main brackets cursor)
4729 zhighlighters=(main brackets pattern)
4730
4731
4732 #
4733 # SSH
4734 #
4735
4736 # Load these ssh identities with the ssh module
4737 zssh_ids=(id_rsa plasma_id_rsa id_ed25519 id_rsa_aur)
4738
4739
4740 #
4741 # Pacman
4742 #
4743
4744 # Set (optional) pacman front-end.
4745 zpacman_frontend='yay'
4746
4747 # Load any helper scripts as defined here
4748 #zpacman_helper=(aur)
4749 #+end_src
4750
4751 *** zlogin
4752 :PROPERTIES:
4753 :header-args+: :tangle ~/.zlogin
4754 :END:
4755
4756 #+begin_src sh
4757
4758
4759 #
4760 # User configuration sourced by login shells
4761 #
4762
4763 # Initialize zim
4764 [[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
4765 #+end_src
4766
4767 *** zprofile
4768 :PROPERTIES:
4769 :header-args+: :tangle ~/.zprofile
4770 :END:
4771
4772 #+begin_src sh
4773 #PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
4774 #PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
4775 export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
4776 export XDG_CONFIG_HOME=$HOME/.config
4777 export XDG_DATA_HOME=$HOME/.local/share
4778 export XDG_DATA_DIRS=/usr/local/share:/usr/share
4779 export MAILDIR="$HOME/mail"
4780 export CVS_RSH=ssh
4781 #export MATHMODELS=$HOME/src/eiffel/mathmodels
4782 #export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
4783 #export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
4784
4785 # Eiffel2Java stuff
4786 #export JAVA_HOME=/usr/lib/jvm/default
4787 #export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
4788 #export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4789 #export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4790
4791 #export PATH="$HOME/usr/build/pvs:$PATH"
4792 #export SBCLISP_HOME=/usr/share/sbcl-source
4793 #export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
4794
4795 export MOZ_USE_XINPUT2=1 # precise scrolling in firefox
4796
4797 #export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
4798 #export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
4799
4800 if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
4801 #+end_src
4802
4803 *** zshenv
4804 :PROPERTIES:
4805 :header-args+: :tangle ~/.zshenv
4806 :END:
4807
4808 #+begin_src sh
4809 # Ensure that a non-login, non-interactive shell has a defined environment.
4810 if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
4811 source "${ZDOTDIR:-$HOME}/.zprofile"
4812 fi
4813 #+end_src
4814
4815 *** zshrc
4816 :PROPERTIES:
4817 :header-args+: :tangle ~/.zshrc
4818 :END:
4819
4820 #+begin_src sh
4821 # Bash-like navigation
4822 #export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
4823 #export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
4824 export WORDCHARS='*?[]~=&;!#$%^(){}<>'
4825 #ZLE_SPACE_SUFFIX_CHARS=$'|&'
4826
4827 #disable -r time # disable shell reserved word
4828 #alias time='time -p' # -p for POSIX output
4829
4830 # rehash if last command was pacaur or pacman
4831 # (so that zsh picks up changes in $PATH immediately)
4832 TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
4833
4834 #
4835 # User configuration sourced by interactive shells
4836 #
4837
4838 # Change default zim location
4839 export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
4840
4841 # Start zim
4842 [[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
4843
4844 ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
4845 #ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
4846
4847 setopt globdots
4848
4849 source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
4850 source ~/.zsh/zsh-autopair/autopair.zsh
4851
4852
4853 ### fzf ###
4854
4855 source /usr/share/fzf/key-bindings.zsh
4856 source /usr/share/fzf/completion.zsh
4857
4858 # Accept history selection instead of putting it on
4859 # the command line
4860 fzf-history-widget-accept() {
4861 fzf-history-widget
4862 zle accept-line
4863 }
4864 #zle -N fzf-history-widget-accept
4865 #bindkey '^R' fzf-history-widget-accept
4866
4867 # alt+c preview
4868 export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
4869
4870 ### fzf ###
4871
4872
4873 # aliases
4874 alias mpv="mpv --ytdl-format mp4"
4875 alias mv="mv -iv"
4876 alias cp="cp -iv"
4877 alias scl=systemctl
4878 alias jcl=journalctl
4879 alias m="mbsync -Va; getmail; notmuch new"
4880 alias best="youtube-dl -f best"
4881 alias nixx="ssh amin@nix.aminb.org"
4882 alias fence="ssh aminb@fencepost.gnu.org"
4883
4884 aur() {
4885 cd ~/usr/build
4886 git clone https://aur.archlinux.org/${1}.git
4887 cd ${1}
4888 }
4889
4890 # i-beam cursor
4891 echo -e "\033[5 q"
4892 #echo -e "\033[6 q"
4893 #+end_src
4894
4895 * Scripts
4896
4897 This section contains various useful scripts and the ones used by the
4898 programs above. For instance, =toggle-tablet= for switching to and
4899 from tablet mode on my X220T, =toggle-presentation-mode= for toggling
4900 Xfce's presentation mode which keeps the screen awake, and
4901 =rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
4902 exact brightness value.
4903
4904 ** battery-percentage-time
4905 :PROPERTIES:
4906 :header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/sh"
4907 :END:
4908
4909 #+begin_src sh
4910 dbus_send() {
4911 label=$1
4912 dbus-send --print-reply=literal --system \
4913 --dest=org.freedesktop.UPower \
4914 /org/freedesktop/UPower/devices/battery_BAT0 \
4915 org.freedesktop.DBus.Properties.Get \
4916 string:org.freedesktop.UPower.Device \
4917 string:"${label}" | awk '{print $3}'
4918 }
4919
4920 perc=$(dbus_send 'Percentage')
4921 state=$(dbus_send 'State')
4922
4923 if [ "$state" -eq 2 ]; then # Discharging
4924 secs=$(dbus_send 'TimeToEmpty')
4925 elif [ "$state" -eq 1 ]; then # Charging
4926 secs=$(dbus_send 'TimeToFull')
4927 fi
4928
4929 printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60))
4930 #+end_src
4931
4932 ** rofi-light
4933 :PROPERTIES:
4934 :header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
4935 :END:
4936
4937 #+begin_src bash
4938 cur=$(light -G)
4939 val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 12)
4940 light -S $val
4941 #+end_src
4942
4943 ** s (run sway)
4944 :PROPERTIES:
4945 :header-args+: :tangle ~/.local/bin/s :shebang "#!/bin/bash"
4946 :END:
4947
4948 #+begin_src bash
4949 export _JAVA_AWT_WM_NONREPARENTING=1
4950 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4951 light -Scrs "intel_backlight" 2
4952 source $HOME/.zprofile
4953 sway
4954 #+end_src
4955
4956 ** sway-ws-util
4957 :PROPERTIES:
4958 :header-args+: :tangle ~/.local/bin/sway-ws-util :shebang "#!/bin/bash"
4959 :END:
4960
4961 #+begin_src bash
4962 curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name')
4963 [[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1))
4964 [[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1))
4965 dest_ws=-1
4966 op=-1
4967
4968 if [ "$1" = "switch" ] || [ "$1" = "move" ]; then
4969 op="$1"
4970 if [ "$2" = "prev" ]; then
4971 dest_ws="$prev_ws"
4972 elif [ "$2" = "next" ]; then
4973 dest_ws="$next_ws"
4974 else
4975 echo "Usage: $0 $1 {prev|next} [follow]"
4976 exit 1
4977 fi
4978 else
4979 echo "Usage: $0 {switch|move} {prev|next} [follow]"
4980 exit 1
4981 fi
4982
4983 if [ "$op" = "switch" ]; then
4984 sway workspace "$dest_ws"
4985 elif [ "$op" = "move" ]; then
4986 sway move container to workspace "$dest_ws"
4987 if [ "$3" = "follow" ]; then
4988 sway workspace "$dest_ws"
4989 fi
4990 fi
4991 #+end_src
4992
4993 ** toggle-layout
4994 :PROPERTIES:
4995 :header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
4996 :END:
4997
4998 #+begin_src bash
4999 lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
5000
5001 if [ "$lang" = "us" ]; then
5002 setxkbmap ir
5003 else
5004 setxkbmap us
5005 # xmodmap $HOME/.Xmodmap
5006 fi
5007 #+end_src
5008
5009 ** toggle-presentation-mode
5010 :PROPERTIES:
5011 :header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
5012 :END:
5013
5014 #+begin_src bash
5015 xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
5016 #+end_src
5017
5018 ** toggle-tablet
5019 :PROPERTIES:
5020 :header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
5021 :END:
5022
5023 This script toggles between a 'normal' mode and a 'tablet' mode, doing
5024 a few things:
5025
5026 - rotates the screen using =xrandr=, so that rotating the physical
5027 display of my X220t would have the laptop's battery on the right
5028 hand side,
5029 - enables touch screen,
5030 - properly rotates the stylus pen and touch screen pointers, and
5031 - toggles between RGB and Vertical BGR sub-pixel order.
5032
5033 #+begin_src bash
5034 case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
5035 0) # Screen is not rotated, we should rotate it right (90°)
5036 xrandr -o 3
5037 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
5038 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
5039 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
5040 xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
5041 ;;
5042 1) # Currently top is rotated right, we should set it normal (0°)
5043 xrandr -o 0
5044 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
5045 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
5046 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
5047 xfconf-query -c xsettings -p /Xft/RGBA -s rgb
5048 ;;
5049 *)
5050 echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
5051 exit 1
5052 ;;
5053 esac
5054 #+end_src
5055
5056 ** unlock-def-gk.py
5057 :PROPERTIES:
5058 :header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
5059 :END:
5060
5061 #+begin_src python
5062 import gnomekeyring as gk
5063 # list_item_ids_sync('login')[0] == 1L
5064 gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
5065 #+end_src
5066
5067 ** volume-info
5068 :PROPERTIES:
5069 :header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh"
5070 :END:
5071
5072 #+begin_src sh
5073 cur_vol=$(pamixer --get-volume)
5074
5075 if [ $(pamixer --get-mute) = true ]; then
5076 printf 'mt \n' "$cur_vol"
5077 else
5078 printf '%02d \n' "$cur_vol"
5079 fi
5080 #+end_src
5081
5082 ** wp
5083
5084 My little wallpaper changer script.
5085
5086 *** wp
5087 :PROPERTIES:
5088 :header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
5089 :END:
5090
5091 #+begin_src bash :tangle no
5092 export DISPLAY=:0
5093
5094 case "$1" in
5095 "day")
5096 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5097 ;;
5098 "night")
5099 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5100 ;;
5101 *)
5102 echo $"Usage: $0 {day|night}"
5103 exit 1
5104 esac
5105 #+end_src
5106
5107 *** wp-auto
5108 :PROPERTIES:
5109 :header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
5110 :END:
5111
5112 #+begin_src bash :tangle no
5113 SED=$(which sed)
5114 ROFI=$(which rofi)
5115
5116 export DISPLAY=:0
5117 HOUR=$(date +%H)
5118
5119 if [ -z "${SED}" ]
5120 then
5121 echo "Did not find 'sed', script cannot continue."
5122 exit 1
5123 fi
5124 if [ -z "${ROFI}" ]
5125 then
5126 echo "Did not find rofi, there is no point to continue."
5127 exit 1
5128 fi
5129
5130 ###
5131 # Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
5132 # Repeated calls should leave the config clean-ish
5133 ###
5134 function set_theme()
5135 {
5136 CDIR="${HOME}/.config/rofi/"
5137 if [ ! -d "${CDIR}" ]
5138 then
5139 mkdir -p ${CDIR}
5140 fi
5141 if [ -f "${CDIR}/config" ]
5142 then
5143 ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
5144 fi
5145 echo "rofi.theme: ${1}" >> "${CDIR}/config"
5146
5147 }
5148
5149 if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
5150 then
5151 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5152 xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
5153 set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
5154 else
5155 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5156 xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
5157 set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
5158 fi
5159 #+end_src
5160
5161 *** wp.service
5162 :PROPERTIES:
5163 :header-args+: :tangle ~/.config/systemd/user/wp.service
5164 :END:
5165
5166 #+begin_src conf :tangle no
5167 [Unit]
5168 Description=wallpaper service
5169
5170 [Service]
5171 Type=oneshot
5172 ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
5173 #+end_src
5174
5175 *** wp.timer
5176 :PROPERTIES:
5177 :header-args+: :tangle ~/.config/systemd/user/wp.timer
5178 :END:
5179
5180 #+begin_src conf :tangle no
5181 [Unit]
5182 [Unit]
5183 Description=wallpaper timer
5184
5185 [Timer]
5186 OnCalendar=07,21:00
5187 Unit=wp.service
5188 Persistent=true
5189
5190 [Install]
5191 WantedBy=timers.target
5192 #+end_src
5193
5194 ** zathura-sync.sh
5195 :PROPERTIES:
5196 :header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
5197 :END:
5198
5199 #+begin_src sh
5200 pos="$1"
5201 pdffile="$2"
5202 zathura --synctex-forward "$pos" "$pdffile" || \
5203 (
5204 zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
5205 sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
5206 #+end_src
5207 ** Fun :)
5208
5209 *** eat-em
5210 :PROPERTIES:
5211 :header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
5212 :END:
5213
5214 #+begin_src sh
5215 # Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5216 # [ESC] character in original post removed here.
5217
5218 # ANSI Color -- use these variables to easily have different color
5219 # and format output. Make sure to output the reset sequence after
5220 # colors (f = foreground, b = background), and use the 'off'
5221 # feature for anything you turn on.
5222
5223 initializeANSI()
5224 {
5225 esc="$(echo -en '\e')"
5226
5227 blackf="${esc}[30m"; redf="${esc}[31m"; greenf="${esc}[32m"
5228 yellowf="${esc}[33m" bluef="${esc}[34m"; purplef="${esc}[35m"
5229 cyanf="${esc}[36m"; whitef="${esc}[37m"
5230
5231 blackb="${esc}[40m"; redb="${esc}[41m"; greenb="${esc}[42m"
5232 yellowb="${esc}[43m" blueb="${esc}[44m"; purpleb="${esc}[45m"
5233 cyanb="${esc}[46m"; whiteb="${esc}[47m"
5234
5235 boldon="${esc}[1m"; boldoff="${esc}[22m"
5236 italicson="${esc}[3m"; italicsoff="${esc}[23m"
5237 ulon="${esc}[4m"; uloff="${esc}[24m"
5238 invon="${esc}[7m"; invoff="${esc}[27m"
5239
5240 reset="${esc}[0m"
5241 }
5242
5243 # note in this first use that switching colors doesn't require a reset
5244 # first - the new color overrides the old one.
5245
5246 #clear
5247
5248 initializeANSI
5249
5250 cat << EOF
5251
5252 ${yellowf} ▄███████▄${reset} ${redf} ▄██████▄${reset} ${greenf} ▄██████▄${reset} ${bluef} ▄██████▄${reset} ${purplef} ▄██████▄${reset} ${cyanf} ▄██████▄${reset}
5253 ${yellowf}▄█████████▀▀${reset} ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset} ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset} ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset} ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset} ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5254 ${yellowf}███████▀${reset} ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset} ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset} ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset} ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset} ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5255 ${yellowf}███████▄${reset} ${redf}████████████${reset} ${greenf}████████████${reset} ${bluef}████████████${reset} ${purplef}████████████${reset} ${cyanf}████████████${reset}
5256 ${yellowf}▀█████████▄▄${reset} ${redf}██▀██▀▀██▀██${reset} ${greenf}██▀██▀▀██▀██${reset} ${bluef}██▀██▀▀██▀██${reset} ${purplef}██▀██▀▀██▀██${reset} ${cyanf}██▀██▀▀██▀██${reset}
5257 ${yellowf} ▀███████▀${reset} ${redf}▀ ▀ ▀ ▀${reset} ${greenf}▀ ▀ ▀ ▀${reset} ${bluef}▀ ▀ ▀ ▀${reset} ${purplef}▀ ▀ ▀ ▀${reset} ${cyanf}▀ ▀ ▀ ▀${reset}
5258
5259 ${boldon}${yellowf} ▄███████▄ ${redf} ▄██████▄ ${greenf} ▄██████▄ ${bluef} ▄██████▄ ${purplef} ▄██████▄ ${cyanf} ▄██████▄${reset}
5260 ${boldon}${yellowf}▄█████████▀▀ ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄ ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄ ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄ ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄ ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5261 ${boldon}${yellowf}███████▀ ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███ ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███ ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███ ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███ ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5262 ${boldon}${yellowf}███████▄ ${redf}████████████ ${greenf}████████████ ${bluef}████████████ ${purplef}████████████ ${cyanf}████████████${reset}
5263 ${boldon}${yellowf}▀█████████▄▄ ${redf}██▀██▀▀██▀██ ${greenf}██▀██▀▀██▀██ ${bluef}██▀██▀▀██▀██ ${purplef}██▀██▀▀██▀██ ${cyanf}██▀██▀▀██▀██${reset}
5264 ${boldon}${yellowf} ▀███████▀ ${redf}▀ ▀ ▀ ▀ ${greenf}▀ ▀ ▀ ▀ ${bluef}▀ ▀ ▀ ▀ ${purplef}▀ ▀ ▀ ▀ ${cyanf}▀ ▀ ▀ ▀${reset}
5265
5266 EOF
5267 #+end_src
5268
5269 *** invade-em
5270 :PROPERTIES:
5271 :header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
5272 :END:
5273
5274 #+begin_src bash
5275 #
5276 # ANSI color scheme script featuring Space Invaders
5277 #
5278 # Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5279 # Modified by lolilolicon
5280 #
5281
5282 f=3 b=4
5283 for j in f b; do
5284 for i in {0..7}; do
5285 printf -v $j$i %b "\e[${!j}${i}m"
5286 done
5287 done
5288 bld=$'\e[1m'
5289 rst=$'\e[0m'
5290
5291 cat << EOF
5292
5293 $f1 ▀▄ ▄▀ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4 ▀▄ ▄▀ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
5294 $f1 ▄█▀███▀█▄ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4 ▄█▀███▀█▄ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
5295 $f1█▀███████▀█ $f2▀▀███▀▀███▀▀ $f3▀█▀██▀█▀ $f4█▀███████▀█ $f5▀▀███▀▀███▀▀ $f6▀█▀██▀█▀$rst
5296 $f1▀ ▀▄▄ ▄▄▀ ▀ $f2 ▀█▄ ▀▀ ▄█▀ $f3▀▄ ▄▀ $f4▀ ▀▄▄ ▄▄▀ ▀ $f5 ▀█▄ ▀▀ ▄█▀ $f6▀▄ ▄▀$rst
5297
5298 $bld$f1▄ ▀▄ ▄▀ ▄ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4▄ ▀▄ ▄▀ ▄ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
5299 $bld$f1█▄█▀███▀█▄█ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4█▄█▀███▀█▄█ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
5300 $bld$f1▀█████████▀ $f2▀▀▀██▀▀██▀▀▀ $f3▀▀█▀▀█▀▀ $f4▀█████████▀ $f5▀▀▀██▀▀██▀▀▀ $f6▀▀█▀▀█▀▀$rst
5301 $bld$f1 ▄▀ ▀▄ $f2▄▄▀▀ ▀▀ ▀▀▄▄ $f3▄▀▄▀▀▄▀▄ $f4 ▄▀ ▀▄ $f5▄▄▀▀ ▀▀ ▀▀▄▄ $f6▄▀▄▀▀▄▀▄$rst
5302
5303
5304 $f7▌$rst
5305
5306 $f7▌$rst
5307
5308 $f7 ▄█▄ $rst
5309 $f7▄█████████▄$rst
5310 $f7▀▀▀▀▀▀▀▀▀▀▀$rst
5311
5312 EOF
5313 #+end_src