098a073b004c341f9cdf8204dcc9ef875830ac0c
[~bandali/configs] / rc.org
1 #+title: rc.org
2 #+property: header-args :comments link :mkdirp yes :results silent
3
4 * About
5
6 This org file contains the configuration files of pretty much every
7 program I use. The files are tangled (i.e. exported, or derived) from
8 this file using =org-babel=.
9
10 Note: This file is best viewed inside Emacs with org mode.
11
12 * Configs
13
14 This section contains the configuration files (dotfiles) of various
15 programs I use.
16
17 ** compton
18 :PROPERTIES:
19 :header-args+: :tangle ~/.config/compton.conf
20 :END:
21
22 #+begin_src conf :tangle no
23 # Shadow
24 shadow = false; # Enabled client-side shadows on windows.
25 no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows.
26 no-dnd-shadow = true; # Don't draw shadows on DND windows.
27 clear-shadow = true; # Zero the part of the shadow's mask behind the
28 # window. Fix some weirdness with ARGB windows.
29 shadow-radius = 5; # The blur radius for shadows. (default 12)
30 shadow-offset-x = -5; # The left offset for shadows. (default -15)
31 shadow-offset-y = -5; # The top offset for shadows. (default -15)
32 # shadow-opacity = 0.7; # The translucency for shadows. (default .75)
33 # shadow-red = 0.0; # Red color value of shadow. (0.0 - 1.0, defaults to 0)
34 # shadow-green = 0.0; # Green color value of shadow. (0.0 - 1.0, defaults to 0)
35 # shadow-blue = 0.0; # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
36 shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ]; # Exclude conditions for shadows.
37 # shadow-exclude = "n:e:Notification";
38 #shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
39 shadow-ignore-shaped = true; # Avoid drawing shadow on all shaped windows
40 # (see also: --detect-rounded-corners)
41
42 # Opacity
43 menu-opacity = 1.0; # The opacity for menus. (default 1.0)
44 #inactive-opacity = 0.9; # Default opacity of inactive windows. (0.0 - 1.0)
45 # active-opacity = 0.8; # Default opacity for active windows. (0.0 - 1.0)
46 frame-opacity = 1.0; # Opacity of window titlebars and borders. (0.1 - 1.0)
47 # inactive-opacity-override = true; # Let inactive opacity set by 'inactive-opacity' overrides
48 # value of _NET_WM_OPACITY. Bad choice.
49 alpha-step = 0.06; # XRender backend: Step size for alpha pictures. Increasing
50 # it may result in less X resource usage,
51 # Yet fading may look bad.
52 #inactive-dim = 0.5; # Dim inactive windows. (0.0 - 1.0)
53 #inactive-dim-fixed = true; # Do not let dimness adjust based on window opacity.
54 # blur-background = true; # Blur background of transparent windows.
55 # Bad performance with X Render backend.
56 # GLX backend is preferred.
57 # blur-background-frame = true; # Blur background of opaque windows with transparent
58 # frames as well.
59 blur-background-fixed = true; # Do not let blur radius adjust based on window opacity.
60 blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
61 # Exclude conditions for background blur.
62
63 # Fading
64 fading = false; # Fade windows during opacity changes.
65 fade-delta = 3; # The time between steps in a fade in milliseconds. (default 10).
66 fade-in-step = 0.03; # Opacity change between steps while fading in. (default 0.028).
67 fade-out-step = 0.03; # Opacity change between steps while fading out. (default 0.03).
68 # no-fading-openclose = true; # Avoid fade windows in/out when opening/closing.
69 fade-exclude = [ ]; # Exclude conditions for fading.
70
71 # Other
72 backend = "glx" # Backend to use: "xrender" or "glx". GLX backend is typically
73 # much faster but depends on a sane driver.
74 mark-wmwin-focused = true; # Try to detect WM windows and mark them as active.
75 mark-ovredir-focused = true; # Mark all non-WM but override-redirect windows active (e.g. menus).
76 use-ewmh-active-win = true; # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
77 # instead of using FocusIn/Out events. Usually more reliable but
78 # depends on a EWMH-compliant WM.
79 detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
80 detect-client-opacity = true; # Detect _NET_WM_OPACITY on client windows, useful for window
81 # managers not passing _NET_WM_OPACITY of client windows to frame
82 # windows.
83 refresh-rate = 0; # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
84 vsync = "drm"; # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
85 # See man page for more details.
86 dbe = false; # Enable DBE painting mode. Rarely needed.
87 paint-on-overlay = true; # Painting on X Composite overlay window. Recommended.
88 sw-opti = false; # Limit compton to repaint at most once every 1 / refresh_rate.
89 # Incompatible with certain VSync methods.
90 unredir-if-possible = false; # Unredirect all windows if a full-screen opaque window is
91 # detected, to maximize performance for full-screen windows.
92 focus-exclude = [ ]; # A list of conditions of windows that should always be considered
93 # focused.
94 detect-transient = true; # Use WM_TRANSIENT_FOR to group windows, and consider windows in
95 # the same group focused at the same time.
96 detect-client-leader = true; # Use WM_CLIENT_LEADER to group windows.
97 invert-color-include = [ ]; # Conditions for windows to be painted with inverted color.
98
99 # GLX backend # GLX backend fine-tune options. See man page for more info.
100 glx-no-stencil = true; # Recommended.
101 glx-copy-from-front = false; # Useful with --glx-swap-method,
102 # glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
103 # glx-no-rebind-pixmap = true; # Recommended if it works.
104 glx-no-rebind-pixmap = true; # Recommended if it works.
105 #glx-swap-method = "4"; # See man page.
106 glx-swap-method = "4"; # See man page.
107
108 # Window type settings
109 wintypes:
110 {
111 tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
112 menu = { shadow = false; };
113 dropdown_menu = { shadow = false; };
114 popup_menu = { shadow = false; };
115 utility = { shadow = false; };
116 # fade: Fade the particular type of windows.
117 # shadow: Give those windows shadow
118 # opacity: Default opacity for the type of windows.
119 # focus: Whether to always consider windows of this type focused.
120 };
121 #+end_src
122
123 ** dovecot
124 :PROPERTIES:
125 :header-args+: :tangle "/sudo::/etc/dovecot/dovecot.conf"
126 :END:
127
128 #+begin_src conf
129 protocols = imap
130
131 listen = 127.0.0.1
132 log_path = /var/log/dovecot.log
133 info_log_path = /var/log/dovecot-info.log
134
135 ssl = no
136 disable_plaintext_auth = no
137
138 auth_verbose = yes
139 auth_mechanisms = plain
140
141 passdb {
142 driver = passwd-file
143 args = /etc/dovecot/passwd
144 }
145
146 userdb {
147 driver = static
148 args = uid=amin gid=amin home=/home/amin/mail/%d/%n
149 default_fields = mail=maildir:/home/amin/mail/%d/%n/mail
150 }
151
152 # mail_home = /home/amin/mail/%d/%n
153 # mail_location = maildir:/home/amin/mail/%d/%n/mail:LAYOUT=fs:INBOX=/home/amin/mail/%d/%n/mail/Inbox
154
155 # namespace {
156 # inbox = yes
157 # separator = /
158 # }
159
160 mail_plugins = $mail_plugins fts fts_lucene
161
162 plugin {
163 fts = lucene
164 fts_lucene = whitespace_chars=@.
165 fts_autoindex = yes
166 }
167 #+end_src
168
169 ** Dunst
170 :PROPERTIES:
171 :header-args+: :tangle ~/.config/dunst/dunstrc
172 :END:
173
174 #+begin_src conf
175 [global]
176 #font = Ubuntu Mono 10.5
177 font = Inconsolata 11
178
179 # Path to default icons.
180 icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
181
182 icon_position = left
183 # <b>bold</b>
184 # <i>italic</i>
185 # <s>strikethrough<s/>
186 # <u>underline</u>
187 markup = full
188 # The format of the message. Possible variables are:
189 # %a appname
190 # %s summary
191 # %b body
192 # %i iconname (including its path)
193 # %I iconname (without its path)
194 # %p progress value if set ([ 0%] to [100%]) or nothing
195 # Markup is allowed
196 format = "<b>%s</b>\n%b"
197 # Sort messages by urgency
198 sort = yes
199 # Show how many messages are currently hidden (because of geometry)
200 indicate_hiddenl= no
201 # Alignment of message text.
202 # Possible values are "left", "center" and "right"
203 alignment = center
204 # The frequency with wich text that is longer than the notification
205 # window allows bounces back and forth.
206 # This option conflicts with 'word_wrap'.
207 # Set to 0 to disable
208 bounce_freq = 3
209 # show age of message if message is older than show_age_threshold seconds.
210 # set to -1 to disable
211 show_age_threshold = -1
212 # split notifications into multiple lines if they don't fit into geometry
213 word_wrap = yes
214 # ignore newlines '\n' in notifications
215 ignore_newline = no
216 # The geometry of the message window.
217 # geometry [{width}]x{height}][+/-{x}+/-{y}]
218 # The height is measured in number of notifications everything else in pixels. If the width
219 # is omitted but the height is given ("-geometry x2"), the message window
220 # expands over the whole screen (dmenu-like). If width is 0,
221 # the window expands to the longest message displayed.
222 # A positive x is measured from the left, a negative from the
223 # right side of the screen. Y is measured from the top and down respectevly.
224 # The width can be negative. In this case the actual width is the
225 # screen width minus the width defined in within the geometry option.
226 #geometry = "410x12-12+12"
227 #geometry = "0x0-30-30"
228 geometry = "260x12-30-30"
229 # The transparency of the window. range: [0; 100]
230 # This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
231 transparency = 0
232 # Don't remove messages, if the user is idle (no mouse or keyboard input)
233 # for longer than idle_threshold seconds.
234 # Set to 0 to disable.
235 idle_threshold = 120
236 # Which monitor should the notifications be displayed on.
237 monitor = 0
238 # Display notification on focused monitor. Possible modes are:
239 # mouse: follow mouse pointer
240 # keyboard: follow window with keyboard focus
241 # none: don't follow anything
242 #
243 # "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
244 # This should be the case for almost all modern windowmanagers.
245 #
246 # If this option is set to mouse or keyboard, the monitor option will be
247 # ignored.
248 follow = keyboard
249 # should a notification popped up from history be sticky or
250 # timeout as if it would normally do.
251 sticky_history = yes
252 # The height of a single line. If the height is smaller than the font height,
253 # it will get raised to the font height.
254 # This adds empty space above and under the text.
255 line_height = 0
256
257 show_indicators = yes
258
259 # Draw a line of 'separatpr_height' pixel height between two notifications.
260 # Set to 0 to disable
261 separator_height = 3
262 # padding between text and separator
263 padding = 8
264 # horizontal padding
265 horizontal_padding = 8
266 # Define a color for the separator.
267 # possible values are:
268 # * auto: dunst tries to find a color fitting to the background
269 # * foreground: use the same color as the foreground
270 # * frame: use the same color as the frame.
271 # * anything else will be interpreted as a X color
272 separator_color = foreground
273 # print a notification on startup
274 # This is mainly for error detection, since dbus (re-)starts dunst
275 # automatically after a crash.
276 startup_notification = false
277 # dmenu path
278 #dmenu = /usr/bin/dmenu -p dunst:
279 dmenu = /usr/bin/rofi -dmenu -p dunst:
280 # browser for opening urls in context menu
281 browser = /usr/bin/firefox -new-tab
282 [frame]
283 width = 0
284 color = "#377222"
285 [shortcuts]
286 # shortcuts are specified as [modifier+][modifier+]...key
287 # available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
288 # and 'mod4' (windows-key)
289 # xev might be helpful to find names for keys
290 # close notification
291 close = ctrl+space
292 # close all notifications
293 close_all = ctrl+shift+space
294 # redisplay last message(s)
295 # On the US keyboard layout 'grave' is normally above TAB and left of '1'.
296 history = ctrl+shift+h
297 # context menu
298 context = ctrl+shift+period
299 [urgency_low]
300 # IMPORTANT: colors have to be defined in quotation marks.
301 # Otherwise the '#' and following would be interpreted as a comment.
302 background = "#1d2a30"
303 foreground = "#71c2af"
304 timeout = 3
305 [urgency_normal]
306 background = "#1d2a30"
307 foreground = "#71c2af"
308 timeout = 0
309 [urgency_critical]
310 background = "#1d2a30"
311 foreground = "#ff9982"
312 timeout = 0
313
314 # Every section that isn't one of the above is interpreted as a rules
315 # to override settings for certain messages.
316 # Messages can be matched by 'appname', 'summary', 'body' or 'icon'
317 # and you can override the 'timeout', 'urgency', 'foreground', 'background'
318 # and 'format'.
319 # Shell-like globbing will get expanded.
320 #
321 # SCRIPTING
322 # you can specify a script that gets run when the rule matches by setting
323 # the 'script' option.
324 # The script will be called as follows:
325 # script appname summary body icon urgency
326 # where urgency can be "LOW", "NORMAL" or "CRITICAL".
327 #
328 # NOTE: if you don't want a notification to be displayed, set the format to ""
329 # NOTE: It might be helpful to run dunst -print in a terminal in order to find
330 # fitting options for rules.
331 #[espeak]
332 # summary = "*"
333 # script = dunst_espeak.sh
334 #[script-test]
335 # summary = "*script*"
336 # script = dunst_test.sh
337 #[ignore]
338 ## This notification will not be displayed
339 # summary = "foobar"
340 # format = ""
341 #[signed_on]
342 # appname = Pidgin
343 # summary = "*signed on*"
344 # urgency = low
345 #
346 #[signed_off]
347 # appname = Pidgin
348 # summary = *signed off*
349 # urgency = low
350 #
351 #[says]
352 # appname = Pidgin
353 # summary = *says*
354 # urgency = critical
355 #
356 #[twitter]
357 # appname = Pidgin
358 # summary = *twitter.com*
359 # urgency = normal
360 #
361 [xfpm-backlight]
362 summary = *Brightness*
363 urgency = low
364 #+end_src
365
366 ** Fontconfig
367 :PROPERTIES:
368 :header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
369 :END:
370
371 #+begin_src xml
372 <?xml version="1.0"?>
373 <!DOCTYPE fontconfig SYSTEM "fonts.dtd">
374 <fontconfig>
375 <match target="font">
376 <edit mode="assign" name="rgba">
377 <const>rgb</const>
378 </edit>
379 </match>
380 <match target="font">
381 <edit mode="assign" name="hinting">
382 <bool>true</bool>
383 </edit>
384 </match>
385 <match target="font">
386 <edit mode="assign" name="hintstyle">
387 <const>hintslight</const>
388 </edit>
389 </match>
390 <match target="font">
391 <edit mode="assign" name="antialias">
392 <bool>true</bool>
393 </edit>
394 </match>
395 <match target="font">
396 <edit mode="assign" name="lcdfilter">
397 <const>lcddefault</const>
398 </edit>
399 </match>
400 <dir>~/.fonts</dir>
401
402 <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
403 <alias binding="same">
404 <family>Helvetica</family>
405 <prefer>
406 <family>Liberation Sans</family>
407 </prefer>
408 </alias>
409 </fontconfig>
410 #+end_src
411
412 ** getmail
413
414 *** getmailrc
415 :PROPERTIES:
416 :header-args+: :tangle ~/.getmail/getmailrc
417 :END:
418
419 #+begin_src conf
420 [retriever]
421 type = SimplePOP3SSLRetriever
422 server = fencepost.gnu.org
423 username = bandali
424 password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
425 port = 995
426 use_apop = True
427
428 [destination]
429 type = Maildir
430 path = ~/mail/gnu/Inbox/
431
432 # [destination]
433 # type = MDA_external
434 # path = /usr/lib/dovecot/deliver
435 # arguments = ('-d', 'amin@aminb.org')
436
437 [options]
438 delete = True
439 #+end_src
440
441 *** getmail.service
442 :PROPERTIES:
443 :header-args+: :tangle ~/.config/systemd/user/getmail.service
444 :END:
445
446 #+begin_src conf :tangle no
447 [Unit]
448 Description=getmail service
449
450 [Service]
451 Type=oneshot
452 ExecStart=/usr/bin/getmail
453 StandardOutput=syslog
454 StandardError=syslog
455 #+end_src
456
457 *** getmail.timer
458 :PROPERTIES:
459 :header-args+: :tangle ~/.config/systemd/user/getmail.timer
460 :END:
461
462 #+begin_src conf :tangle no
463 [Unit]
464 Description=getmail timer
465
466 [Timer]
467 OnCalendar=*:0/30
468 Persistent=true
469 Unit=getmail.service
470
471 [Install]
472 WantedBy=timers.target
473 #+end_src
474
475 ** Git
476
477 *** gitconfig
478 :PROPERTIES:
479 :header-args+: :tangle ~/.gitconfig
480 :END:
481
482 **** user
483 #+begin_src conf
484 [user]
485 name = Amin Bandali
486 email = bandali@gnu.org
487 signingkey = BE6273738E616D6D1B3A08E8A21A020248816103
488 #+end_src
489
490 **** signing
491 #+begin_src conf
492 [commit]
493 gpgsign = true
494 # [format]
495 # signoff = true
496 #+end_src
497
498 **** core
499 #+begin_src conf
500 [core]
501 autocrlf = input # CRLF -> LF on commit
502 editor = emacsclient -t
503 excludesfile = ~/.gitignore_global
504 pager = "less"
505 #+end_src
506
507 **** gpg
508 #+begin_src conf
509 [gpg]
510 program = gpg2
511 #+end_src
512
513 **** alias
514 #+begin_src conf
515 [alias]
516 git = !exec git # handle nested git calls, e.g. git git status
517 aliases = config --get-regexp '^alias\\.'
518 a = add
519 s = status
520 sl = status --long
521 c = checkout
522 cb = checkout -b
523 b = branch
524 r = rebase
525 p = pull
526 pr = pull --rebase
527 ps = push
528 psf = push --force
529 nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f"
530 nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f"
531 #+end_src
532
533 **** color
534 #+begin_src conf
535 [color]
536 ui = auto
537 [color "status"]
538 added = green bold
539 changed = red bold
540 untracked = red bold
541 [color "branch"]
542 current = green bold
543 remote = magenta bold
544 [color "diff"]
545 new = green bold
546 old = red bold
547 #+end_src
548
549 **** status
550 #+begin_src conf
551 [status]
552 # showUntrackedFiles = all
553 short=true
554 branch=true
555 #+end_src
556
557 **** github
558 #+begin_src conf
559 [github]
560 user = aminb
561 #+end_src
562
563 **** send-email
564 #+begin_src conf
565 [sendemail]
566 smtpuser = bandali
567 smtpserver = fencepost.gnu.org
568 smtpserverport = 587
569 smtpencryption = tls
570 annotate = yes
571 #+end_src
572
573 *** gitignore
574 :PROPERTIES:
575 :header-args+: :tangle ~/.gitignore_global
576 :END:
577
578 #+begin_src conf
579 *.orig
580 *.py[co]
581 *.sublime-workspace
582 *~
583 .DS_Store
584 *.elc
585 *-autoloads.el
586 #+end_src
587
588 ** GnuPG
589 :PROPERTIES:
590 :header-args+: :tangle ~/.gnupg/gpg-agent.conf
591 :END:
592
593 #+begin_src conf
594 default-cache-ttl 43200
595 max-cache-ttl 43200
596
597 default-cache-ttl-ssh 10800
598 max-cache-ttl-ssh 10800
599
600 # pinentry-program /usr/bin/pinentry-qt
601 #+end_src
602
603 ** GTK
604
605 *** gtk-2.0
606 :PROPERTIES:
607 :header-args+: :tangle ~/.gtkrc-2.0
608 :END:
609
610 #+begin_src conf
611 gtk-theme-name="Greybird"
612 gtk-icon-theme-name="Paper"
613 gtk-font-name="Ubuntu 10"
614 gtk-menu-images=0
615 # gtk-key-theme-name = "Emacs"
616 #+end_src
617
618 *** gtk-3.0
619 :PROPERTIES:
620 :header-args+: :tangle ~/.config/gtk-3.0/settings.ini
621 :END:
622
623 #+begin_src conf :tangle no
624 [Settings]
625 gtk-icon-theme-name = Paper
626 # gtk-theme-name = Adwaita
627
628 gtk-theme-name = Greybird
629 # gtk-theme-name = Arc-Darker
630 # gtk-theme-name = Numix-ArchBlue
631
632 gtk-font-name = Ubuntu 10
633 # gtk-key-theme-name = Emacs
634 #+end_src
635
636 ** [[https://github.com/Leinnan/i3gs][i3gs]]
637 :PROPERTIES:
638 :header-args+: :tangle ~/.config/i3gs/config
639 :END:
640
641 #+begin_src conf :comments none :tangle no
642 borders_width=0 0 2 0
643 separator_width=10
644
645 #[mpd]
646 #preset=MPD
647 #title=<span weight='heavy' fgcolor='#7FDBFF'> </span>
648 #borders_color=#7FDBFF
649
650 [ram]
651 preset=RAM
652 title=<span weight='heavy' fgcolor='#3D9970'> </span>
653 borders_color=#3D9970
654
655 #[cpu]
656 #preset=CPU
657 #title=<span weight='heavy' fgcolor='#2ECC40'> </span>
658 #borders_color=#2ECC40
659
660 #[hdd]
661 #preset=HDD
662 #title=<span weight='heavy' fgcolor='#01FF70'> </span>
663 #borders_color=#01FF70
664
665 [volume]
666 command=volume-info
667 title=<span weight='heavy' fgcolor='#7FDBFF'></span>
668 borders_color=#7FDBFF
669
670 [battery]
671 preset=BAT
672 command=battery-percentage-time
673 title=<span weight='heavy' fgcolor='#39CCCC'> </span>
674 borders_color=#39CCCC
675
676 [wifi]
677 preset=WIFI
678 title=<span weight='heavy' fgcolor='#01FF70'> </span>
679 borders_color=#01FF70
680
681 [date]
682 preset=DATE
683 command=date '+%-I:%M, %a %b %d '
684 title=<span weight='heavy' fgcolor='#FFDC00'> </span>
685 borders_color=#FFDC00
686 separator_width=0
687 #+end_src
688
689 ** i3status
690 :PROPERTIES:
691 :header-args+: :tangle ~/.config/i3status/config
692 :END:
693
694 #+begin_src conf :comments none
695 # i3status configuration file.
696 # see "man i3status" for documentation.
697
698 # It is important that this file is edited as UTF-8.
699 # The following line should contain a sharp s:
700 # ß
701 # If the above line is not correctly displayed, fix your editor first!
702
703 general {
704 colors = true
705 interval = 5
706 output_format = "i3bar"
707 }
708
709 # order += "ipv6"
710 order += "disk /"
711 order += "disk /data"
712 # order += "wireless _first_"
713 order += "ethernet _first_"
714 order += "battery 0"
715 order += "volume master"
716 # order += "load"
717 order += "tztime local"
718
719 wireless _first_ {
720 format_up = "W:%quality %essid %ip"
721 format_down = "W: down"
722 }
723
724 ethernet _first_ {
725 # if you use %speed, i3status requires root privileges
726 # format_up = "E: %ip (%speed)"
727 format_up = "E: %ip"
728 format_down = "E: down"
729 }
730
731 battery 0 {
732 format = "%status %percentage %remaining %consumption"
733 path = "/sys/class/power_supply/BAT%d/uevent"
734 low_threshold = "10"
735 threshold_type = "percentage"
736 last_full_capacity = true
737 integer_battery_capacity = true
738 hide_seconds = true
739 }
740
741 tztime local {
742 format = "%A %Y-%m-%d %I:%M %p"
743 }
744
745 volume master {
746 format = "♪ %volume"
747 format_muted = "🔇 %volume"
748 device = "pulse"
749 }
750
751 load {
752 format = "%1min"
753 }
754
755 disk "/" {
756 format = "/ %avail"
757 }
758
759 disk "/data" {
760 format = "/data %avail"
761 }
762 #+end_src
763
764 ** isync
765
766 *** mbsyncrc
767 :PROPERTIES:
768 :header-args+: :tangle ~/.mbsyncrc
769 :END:
770
771 #+begin_src conf
772 # Global defaults
773 CopyArrivalDate yes
774 Create Both
775 Expunge Both
776
777 ######
778 IMAPAccount amin
779 Host mail.bndl.org
780 User amin@bndl.org
781 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
782 SSLType IMAPS
783
784 IMAPStore amin-remote
785 Account amin
786
787 IMAPAccount amin-dovecot
788 Host 127.0.0.1
789 Port 143
790 User amin@bndl.org
791 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin-dovecot.gpg"
792 SSLType None
793
794 IMAPStore amin-local
795 Account amin-dovecot
796
797 Channel amin
798 Master :amin-remote:
799 Slave :amin-local:
800 Patterns *
801
802 ######
803 IMAPAccount uwaterloo
804 Host connect.uwaterloo.ca
805 User abandali
806 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
807 SSLType IMAPS
808
809 IMAPStore uwaterloo-remote
810 Account uwaterloo
811
812 IMAPAccount uwaterloo-dovecot
813 Host 127.0.0.1
814 Port 143
815 User abandali@uwaterloo.ca
816 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo-dovecot.gpg"
817 SSLType None
818
819 IMAPStore uwaterloo-local
820 Account uwaterloo-dovecot
821
822 Channel uwaterloo
823 Master :uwaterloo-remote:
824 Slave :uwaterloo-local:
825 Patterns *
826
827 ######
828 IMAPAccount csclub
829 Host mail.csclub.uwaterloo.ca
830 User abandali
831 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/csclub.gpg"
832 SSLType IMAPS
833
834 IMAPStore csclub-remote
835 Account csclub
836
837 IMAPAccount csclub-dovecot
838 Host 127.0.0.1
839 Port 143
840 User abandali@csclub.uw
841 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/csclub-dovecot.gpg"
842 SSLType None
843
844 IMAPStore csclub-local
845 Account csclub-dovecot
846
847 Channel csclub
848 Master :csclub-remote:
849 Slave :csclub-local:
850 Patterns *
851 #+end_src
852
853 *** mbsync.service
854 :PROPERTIES:
855 :header-args+: :tangle ~/.config/systemd/user/mbsync.service
856 :END:
857
858 #+begin_src conf :tangle no
859 [Unit]
860 Description=mbsync service
861
862 [Service]
863 Type=oneshot
864 ExecStart=/usr/bin/mbsync -Va
865 StandardOutput=syslog
866 StandardError=syslog
867 #+end_src
868
869 *** mbsync.timer
870 :PROPERTIES:
871 :header-args+: :tangle ~/.config/systemd/user/mbsync.timer
872 :END:
873
874 #+begin_src conf :tangle no
875 [Unit]
876 Description=mbsync timer
877
878 [Timer]
879 OnCalendar=*:0/15
880 Persistent=true
881 Unit=mbsync.service
882
883 [Install]
884 WantedBy=timers.target
885 #+end_src
886
887 ** Latexmk
888 :PROPERTIES:
889 :header-args+: :tangle ~/.latexmkrc
890 :END:
891
892 #+begin_src conf
893 $pdf_previewer = "start zathura %O %S";
894 $clean_ext = "aux out";
895
896 # $pdf_update_method = 4;
897 # $pdf_update_command = "zathura %O %S";
898
899 # Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
900 # by Ctrl+click in the PDF.
901 # Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
902 # editor.
903 # $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
904 #+end_src
905
906 ** libinput
907
908 Improve XPS 15 9560's touchpad experience.
909
910 # begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
911 #+begin_src conf :tangle no
912 Section "InputClass"
913 Identifier "libinput touchpad catchall"
914 Driver "libinput"
915 MatchIsTouchpad "on"
916 Option "ClickMethod" "clickfinger"
917 Option "NaturalScrolling" "true"
918 Option "Tapping" "on"
919 Option "TappingButtonMap" "lrm"
920 EndSection
921 #+end_src
922
923 ** mkinitcpio
924
925 #+begin_src conf :tangle /sudo::/etc/mkinitcpio.conf :comments none
926 # vim:set ft=sh
927 # MODULES
928 # The following modules are loaded before any boot hooks are
929 # run. Advanced users may wish to specify all system modules
930 # in this array. For instance:
931 # MODULES=(piix ide_disk reiserfs)
932 MODULES=(i915)
933
934 # BINARIES
935 # This setting includes any additional binaries a given user may
936 # wish into the CPIO image. This is run last, so it may be used to
937 # override the actual binaries included by a given hook
938 # BINARIES are dependency parsed, so you may safely ignore libraries
939 BINARIES=()
940
941 # FILES
942 # This setting is similar to BINARIES above, however, files are added
943 # as-is and are not parsed in any way. This is useful for config files.
944 FILES=()
945
946 # HOOKS
947 # This is the most important setting in this file. The HOOKS control the
948 # modules and scripts added to the image, and what happens at boot time.
949 # Order is important, and it is recommended that you do not change the
950 # order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
951 # help on a given hook.
952 # 'base' is _required_ unless you know precisely what you are doing.
953 # 'udev' is _required_ in order to automatically load modules
954 # 'filesystems' is _required_ unless you specify your fs modules in MODULES
955 # Examples:
956 ## This setup specifies all modules in the MODULES setting above.
957 ## No raid, lvm2, or encrypted root is needed.
958 # HOOKS=(base)
959 #
960 ## This setup will autodetect all modules for your system and should
961 ## work as a sane default
962 # HOOKS=(base udev autodetect block filesystems)
963 #
964 ## This setup will generate a 'full' image which supports most systems.
965 ## No autodetection is done.
966 # HOOKS=(base udev block filesystems)
967 #
968 ## This setup assembles a pata mdadm array with an encrypted root FS.
969 ## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
970 # HOOKS=(base udev block mdadm encrypt filesystems)
971 #
972 ## This setup loads an lvm2 volume group on a usb device.
973 # HOOKS=(base udev block lvm2 filesystems)
974 #
975 ## NOTE: If you have /usr on a separate partition, you MUST include the
976 # usr, fsck and shutdown hooks.
977 HOOKS=(base udev autodetect modconf block keyboard encrypt lvm2 resume filesystems fsck)
978
979 # COMPRESSION
980 # Use this to compress the initramfs image. By default, gzip compression
981 # is used. Use 'cat' to create an uncompressed image.
982 #COMPRESSION="gzip"
983 #COMPRESSION="bzip2"
984 #COMPRESSION="lzma"
985 #COMPRESSION="xz"
986 #COMPRESSION="lzop"
987 #COMPRESSION="lz4"
988
989 # COMPRESSION_OPTIONS
990 # Additional options for the compressor
991 #COMPRESSION_OPTIONS=()
992 #+end_src
993
994 ** mpd
995 :PROPERTIES:
996 :header-args+: :tangle ~/.config/mpd/mpd.conf
997 :END:
998
999 #+begin_src conf
1000 # An example configuration file for MPD.
1001 # Read the user manual for documentation: http://www.musicpd.org/doc/user/
1002
1003
1004 # Files and directories #######################################################
1005 #
1006 # This setting controls the top directory which MPD will search to discover the
1007 # available audio files and add them to the daemon's online database. This
1008 # setting defaults to the XDG directory, otherwise the music directory will be
1009 # be disabled and audio files will only be accepted over ipc socket (using
1010 # file:// protocol) or streaming files over an accepted protocol.
1011 #
1012 music_directory "~/usr/music"
1013 #
1014 # This setting sets the MPD internal playlist directory. The purpose of this
1015 # directory is storage for playlists created by MPD. The server will use
1016 # playlist files not created by the server but only if they are in the MPD
1017 # format. This setting defaults to playlist saving being disabled.
1018 #
1019 playlist_directory "~/.mpd/playlists"
1020 #
1021 # This setting sets the location of the MPD database. This file is used to
1022 # load the database at server start up and store the database while the
1023 # server is not up. This setting defaults to disabled which will allow
1024 # MPD to accept files over ipc socket (using file:// protocol) or streaming
1025 # files over an accepted protocol.
1026 #
1027 db_file "~/.mpd/database"
1028 #
1029 # These settings are the locations for the daemon log files for the daemon.
1030 # These logs are great for troubleshooting, depending on your log_level
1031 # settings.
1032 #
1033 # The special value "syslog" makes MPD use the local syslog daemon. This
1034 # setting defaults to logging to syslog, otherwise logging is disabled.
1035 #
1036 log_file "~/.mpd/log"
1037 #
1038 # This setting sets the location of the file which stores the process ID
1039 # for use of mpd --kill and some init scripts. This setting is disabled by
1040 # default and the pid file will not be stored.
1041 #
1042 pid_file "~/.mpd/pid"
1043 #
1044 # This setting sets the location of the file which contains information about
1045 # most variables to get MPD back into the same general shape it was in before
1046 # it was brought down. This setting is disabled by default and the server
1047 # state will be reset on server start up.
1048 #
1049 state_file "~/.mpd/state"
1050 #
1051 # The location of the sticker database. This is a database which
1052 # manages dynamic information attached to songs.
1053 #
1054 sticker_file "~/.mpd/sticker.sql"
1055 #
1056 ###############################################################################
1057
1058
1059 # General music daemon options ################################################
1060 #
1061 # This setting specifies the user that MPD will run as. MPD should never run as
1062 # root and you may use this setting to make MPD change its user ID after
1063 # initialization. This setting is disabled by default and MPD is run as the
1064 # current user.
1065 #
1066 #user "nobody"
1067 #
1068 # This setting specifies the group that MPD will run as. If not specified
1069 # primary group of user specified with "user" setting will be used (if set).
1070 # This is useful if MPD needs to be a member of group such as "audio" to
1071 # have permission to use sound card.
1072 #
1073 #group "nogroup"
1074 #
1075 # This setting sets the address for the daemon to listen on. Careful attention
1076 # should be paid if this is assigned to anything other then the default, any.
1077 # This setting can deny access to control of the daemon. Not effective if
1078 # systemd socket activiation is in use.
1079 #
1080 # For network
1081 #bind_to_address "any"
1082 #
1083 # And for Unix Socket
1084 #bind_to_address "~/.mpd/socket"
1085 #
1086 # This setting is the TCP port that is desired for the daemon to get assigned
1087 # to.
1088 #
1089 #port "6600"
1090 #
1091 # This setting controls the type of information which is logged. Available
1092 # setting arguments are "default", "secure" or "verbose". The "verbose" setting
1093 # argument is recommended for troubleshooting, though can quickly stretch
1094 # available resources on limited hardware storage.
1095 #
1096 #log_level "default"
1097 #
1098 # If you have a problem with your MP3s ending abruptly it is recommended that
1099 # you set this argument to "no" to attempt to fix the problem. If this solves
1100 # the problem, it is highly recommended to fix the MP3 files with vbrfix
1101 # (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
1102 # point gapless MP3 playback can be enabled.
1103 #
1104 #gapless_mp3_playback "yes"
1105 #
1106 # Setting "restore_paused" to "yes" puts MPD into pause mode instead
1107 # of starting playback after startup.
1108 #
1109 #restore_paused "no"
1110 #
1111 # This setting enables MPD to create playlists in a format usable by other
1112 # music players.
1113 #
1114 #save_absolute_paths_in_playlists "no"
1115 #
1116 # This setting defines a list of tag types that will be extracted during the
1117 # audio file discovery process. The complete list of possible values can be
1118 # found in the user manual.
1119 #metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
1120 #
1121 # This setting enables automatic update of MPD's database when files in
1122 # music_directory are changed.
1123 #
1124 #auto_update "yes"
1125 #
1126 # Limit the depth of the directories being watched, 0 means only watch
1127 # the music directory itself. There is no limit by default.
1128 #
1129 #auto_update_depth "3"
1130 #
1131 ###############################################################################
1132
1133
1134 # Symbolic link behavior ######################################################
1135 #
1136 # If this setting is set to "yes", MPD will discover audio files by following
1137 # symbolic links outside of the configured music_directory.
1138 #
1139 #follow_outside_symlinks "yes"
1140 #
1141 # If this setting is set to "yes", MPD will discover audio files by following
1142 # symbolic links inside of the configured music_directory.
1143 #
1144 #follow_inside_symlinks "yes"
1145 #
1146 ###############################################################################
1147
1148
1149 # Zeroconf / Avahi Service Discovery ##########################################
1150 #
1151 # If this setting is set to "yes", service information will be published with
1152 # Zeroconf / Avahi.
1153 #
1154 #zeroconf_enabled "yes"
1155 #
1156 # The argument to this setting will be the Zeroconf / Avahi unique name for
1157 # this MPD server on the network.
1158 #
1159 #zeroconf_name "Music Player"
1160 #
1161 ###############################################################################
1162
1163
1164 # Permissions #################################################################
1165 #
1166 # If this setting is set, MPD will require password authorization. The password
1167 # setting can be specified multiple times for different password profiles.
1168 #
1169 #password "password@read,add,control,admin"
1170 #
1171 # This setting specifies the permissions a user has who has not yet logged in.
1172 #
1173 #default_permissions "read,add,control,admin"
1174 #
1175 ###############################################################################
1176
1177
1178 # Database #######################################################################
1179 #
1180
1181 #database {
1182 # plugin "proxy"
1183 # host "other.mpd.host"
1184 # port "6600"
1185 #}
1186
1187 # Input #######################################################################
1188 #
1189
1190 input {
1191 plugin "curl"
1192 # proxy "proxy.isp.com:8080"
1193 # proxy_user "user"
1194 # proxy_password "password"
1195 }
1196
1197 #
1198 ###############################################################################
1199
1200 # Audio Output ################################################################
1201 #
1202
1203 audio_output {
1204 type "pulse"
1205 name "pulse audio"
1206 }
1207
1208 audio_output {
1209 type "fifo"
1210 name "my_fifo"
1211 path "/tmp/mpd.fifo"
1212 format "44100:16:2"
1213 }
1214
1215 # MPD supports various audio output types, as well as playing through multiple
1216 # audio outputs at the same time, through multiple audio_output settings
1217 # blocks. Setting this block is optional, though the server will only attempt
1218 # autodetection for one sound card.
1219 #
1220 # An example of an ALSA output:
1221 #
1222 #audio_output {
1223 # type "alsa"
1224 # name "My ALSA Device"
1225 ## device "hw:0,0" # optional
1226 ## mixer_type "hardware" # optional
1227 ## mixer_device "default" # optional
1228 ## mixer_control "PCM" # optional
1229 ## mixer_index "0" # optional
1230 #}
1231 #
1232 # An example of an OSS output:
1233 #
1234 #audio_output {
1235 # type "oss"
1236 # name "My OSS Device"
1237 ## device "/dev/dsp" # optional
1238 ## mixer_type "hardware" # optional
1239 ## mixer_device "/dev/mixer" # optional
1240 ## mixer_control "PCM" # optional
1241 #}
1242 #
1243 # An example of a shout output (for streaming to Icecast):
1244 #
1245 #audio_output {
1246 # type "shout"
1247 # encoder "vorbis" # optional
1248 # name "My Shout Stream"
1249 # host "localhost"
1250 # port "8000"
1251 # mount "/mpd.ogg"
1252 # password "hackme"
1253 # quality "5.0"
1254 # bitrate "128"
1255 # format "44100:16:1"
1256 ## protocol "icecast2" # optional
1257 ## user "source" # optional
1258 ## description "My Stream Description" # optional
1259 ## url "http://example.com" # optional
1260 ## genre "jazz" # optional
1261 ## public "no" # optional
1262 ## timeout "2" # optional
1263 ## mixer_type "software" # optional
1264 #}
1265 #
1266 # An example of a recorder output:
1267 #
1268 #audio_output {
1269 # type "recorder"
1270 # name "My recorder"
1271 # encoder "vorbis" # optional, vorbis or lame
1272 # path "/var/lib/mpd/recorder/mpd.ogg"
1273 ## quality "5.0" # do not define if bitrate is defined
1274 # bitrate "128" # do not define if quality is defined
1275 # format "44100:16:1"
1276 #}
1277 #
1278 # An example of a httpd output (built-in HTTP streaming server):
1279 #
1280 #audio_output {
1281 # type "httpd"
1282 # name "My HTTP Stream"
1283 # encoder "vorbis" # optional, vorbis or lame
1284 # port "8000"
1285 # bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
1286 ## quality "5.0" # do not define if bitrate is defined
1287 # bitrate "128" # do not define if quality is defined
1288 # format "44100:16:1"
1289 # max_clients "0" # optional 0=no limit
1290 #}
1291 #
1292 # An example of a pulseaudio output (streaming to a remote pulseaudio server)
1293 #
1294 #audio_output {
1295 # type "pulse"
1296 # name "My Pulse Output"
1297 ## server "remote_server" # optional
1298 ## sink "remote_server_sink" # optional
1299 #}
1300 #
1301 # An example of a winmm output (Windows multimedia API).
1302 #
1303 #audio_output {
1304 # type "winmm"
1305 # name "My WinMM output"
1306 ## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1307 # or
1308 ## device "0" # optional
1309 ## mixer_type "hardware" # optional
1310 #}
1311 #
1312 # An example of an openal output.
1313 #
1314 #audio_output {
1315 # type "openal"
1316 # name "My OpenAL output"
1317 ## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1318 #}
1319 #
1320 # An example of an sndio output.
1321 #
1322 #audio_output {
1323 # type "sndio"
1324 # name "sndio output"
1325 # mixer_type "software"
1326 #}
1327 #
1328 # An example of an OS X output:
1329 #
1330 #audio_output {
1331 # type "osx"
1332 # name "My OS X Device"
1333 ## device "Built-in Output" # optional
1334 ## channel_map "-1,-1,0,1" # optional
1335 #}
1336 #
1337 ## Example "pipe" output:
1338 #
1339 #audio_output {
1340 # type "pipe"
1341 # name "my pipe"
1342 # command "aplay -f cd 2>/dev/null"
1343 ## Or if you're want to use AudioCompress
1344 # command "AudioCompress -m | aplay -f cd 2>/dev/null"
1345 ## Or to send raw PCM stream through PCM:
1346 # command "nc example.org 8765"
1347 # format "44100:16:2"
1348 #}
1349 #
1350 ## An example of a null output (for no audio output):
1351 #
1352 #audio_output {
1353 # type "null"
1354 # name "My Null Output"
1355 # mixer_type "none" # optional
1356 #}
1357 #
1358 ###############################################################################
1359
1360
1361 # Normalization automatic volume adjustments ##################################
1362 #
1363 # This setting specifies the type of ReplayGain to use. This setting can have
1364 # the argument "off", "album", "track" or "auto". "auto" is a special mode that
1365 # chooses between "track" and "album" depending on the current state of
1366 # random playback. If random playback is enabled then "track" mode is used.
1367 # See <http://www.replaygain.org> for more details about ReplayGain.
1368 # This setting is off by default.
1369 #
1370 #replaygain "album"
1371 #
1372 # This setting sets the pre-amp used for files that have ReplayGain tags. By
1373 # default this setting is disabled.
1374 #
1375 #replaygain_preamp "0"
1376 #
1377 # This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1378 # By default this setting is disabled.
1379 #
1380 #replaygain_missing_preamp "0"
1381 #
1382 # This setting enables or disables ReplayGain limiting.
1383 # MPD calculates actual amplification based on the ReplayGain tags
1384 # and replaygain_preamp / replaygain_missing_preamp setting.
1385 # If replaygain_limit is enabled MPD will never amplify audio signal
1386 # above its original level. If replaygain_limit is disabled such amplification
1387 # might occur. By default this setting is enabled.
1388 #
1389 #replaygain_limit "yes"
1390 #
1391 # This setting enables on-the-fly normalization volume adjustment. This will
1392 # result in the volume of all playing audio to be adjusted so the output has
1393 # equal "loudness". This setting is disabled by default.
1394 #
1395 #volume_normalization "no"
1396 #
1397 ###############################################################################
1398
1399 # Character Encoding ##########################################################
1400 #
1401 # If file or directory names do not display correctly for your locale then you
1402 # may need to modify this setting.
1403 #
1404 #filesystem_charset "UTF-8"
1405 #
1406 ###############################################################################
1407 #+end_src
1408
1409 ** msmtp
1410 :PROPERTIES:
1411 :header-args+: :tangle ~/.msmtprc
1412 :END:
1413
1414 #+begin_src conf
1415 # Set default values for all following accounts.
1416 defaults
1417 port 587
1418 tls on
1419 auth on
1420 #tls_trust_file /etc/ssl/certs/ca-certificates.crt
1421 logfile ~/.msmtp.log
1422
1423 # amin
1424 account amin
1425 host mail.bndl.org
1426 # use `msmtp -a amin --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1427 tls_fingerprint B8:17:DF:D7:26:56:4F:CD:F0:51:D5:E5:4C:44:B6:F1:C9:47:E7:A2:C7:36:C9:C1:F2:10:85:18:43:72:9D:ED
1428 tls_starttls on
1429 from amin@bndl.org
1430 user amin@bndl.org
1431 passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
1432
1433 account aminb : amin
1434 from amin@aminb.org
1435
1436 # gnu
1437 account gnu
1438 host fencepost.gnu.org
1439 # use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1440 tls_fingerprint FB:DB:E3:7D:96:22:22:20:9F:4A:FD:70:96:99:50:5C:39:B2:29:D9:47:47:52:A8:5A:4A:DF:70:9D:21:DE:C4
1441 tls_starttls on
1442 from bandali@gnu.org
1443 user bandali
1444 passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
1445
1446 # gnu (old)
1447 account gnu-aminb : gnu
1448 from aminb@gnu.org
1449 account gnu-amin : gnu
1450 from amin@gnu.org
1451 account gnu-mab : gnu
1452 from mab@gnu.org
1453
1454 # uwaterloo
1455 account uwaterloo
1456 host connect.uwaterloo.ca
1457 tls_starttls on
1458 from abandali@uwaterloo.ca
1459 user abandali
1460 passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
1461 tls_trust_file /etc/ssl/certs/ca-certificates.crt
1462
1463 # csclub
1464 account csclub
1465 host mail.csclub.uwaterloo.ca
1466 tls_starttls on
1467 from abandali@csclub.uwaterloo.ca
1468 user abandali
1469 passwordeval gpg2 --no-tty -q -d ~/.passwd/csclub.gpg
1470 tls_trust_file /etc/ssl/certs/ca-certificates.crt
1471
1472 # Set a default account
1473 account default : amin
1474 #+end_src
1475
1476 ** ncmpcpp
1477
1478 *** config
1479 :PROPERTIES:
1480 :header-args+: :tangle ~/.ncmpcpp/config
1481 :END:
1482
1483 #+begin_src conf :tangle no
1484 ##############################################################
1485 ## This is the example configuration file. Copy it to ##
1486 ## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
1487 ## and set up your preferences. ##
1488 ##############################################################
1489 #
1490 ##### directories ######
1491 ##
1492 ## Directory for storing ncmpcpp related files.
1493 ## Changing it is useful if you want to store
1494 ## everything somewhere else and provide command
1495 ## line setting for alternative location to config
1496 ## file which defines that while launching ncmpcpp.
1497 ##
1498 #
1499 ncmpcpp_directory = ~/.ncmpcpp
1500 #
1501 ##
1502 ## Directory for storing downloaded lyrics. It
1503 ## defaults to ~/.lyrics since other MPD clients
1504 ## (eg. ncmpc) also use that location.
1505 ##
1506 #
1507 #lyrics_directory = ~/.lyrics
1508 #
1509 ##### connection settings #####
1510 #
1511 #mpd_host = localhost
1512 #
1513 #mpd_port = 6600
1514 #
1515 #mpd_connection_timeout = 5
1516 #
1517 ## Needed for tag editor and file operations to work.
1518 ##
1519 mpd_music_dir = ~/usr/music
1520 #
1521 #mpd_crossfade_time = 5
1522 #
1523 ##### music visualizer #####
1524 ##
1525 ## Note: In order to make music visualizer work you'll
1526 ## need to use mpd fifo output, whose format parameter
1527 ## has to be set to 44100:16:1 for mono visualization
1528 ## or 44100:16:2 for stereo visualization. Example
1529 ## configuration (it has to be put into mpd.conf):
1530 ##
1531 ## audio_output {
1532 ## type "fifo"
1533 ## name "Visualizer feed"
1534 ## path "/tmp/mpd.fifo"
1535 ## format "44100:16:2"
1536 ## }
1537 ##
1538 #
1539 visualizer_fifo_path = /tmp/mpd.fifo
1540 #
1541 ##
1542 ## Note: Below parameter is needed for ncmpcpp
1543 ## to determine which output provides data for
1544 ## visualizer and thus allow syncing between
1545 ## visualization and sound as currently there
1546 ## are some problems with it.
1547 ##
1548 #
1549 visualizer_output_name = my fifo
1550 #
1551 ##
1552 ## If you set format to 44100:16:2, make it 'yes'.
1553 ##
1554 visualizer_in_stereo = yes
1555 #
1556 ##
1557 ## Multiply received samples by given value. Very
1558 ## useful for proper visualization of quiet music.
1559 ##
1560 #visualizer_sample_multiplier = 1
1561 #
1562 ##
1563 ## Note: Below parameter defines how often ncmpcpp
1564 ## has to "synchronize" visualizer and audio outputs.
1565 ## 30 seconds is optimal value, but if you experience
1566 ## synchronization problems, set it to lower value.
1567 ## Keep in mind that sane values start with >=10.
1568 ##
1569 #
1570 visualizer_sync_interval = 30
1571 #
1572 ##
1573 ## Note: To enable spectrum frequency visualization
1574 ## you need to compile ncmpcpp with fftw3 support.
1575 ##
1576 #
1577 ## Available values: spectrum, wave, wave_filled, ellipse.
1578 ##
1579 visualizer_type = spectrum
1580 #
1581 #visualizer_look = ●▮
1582 visualizer_look = "●•"
1583 #
1584 #visualizer_color = blue, cyan, green, yellow, magenta, red
1585 #
1586 ## Alternative subset of 256 colors for terminals that support it.
1587 ##
1588 #visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
1589 #
1590 ##### system encoding #####
1591 ##
1592 ## ncmpcpp should detect your charset encoding
1593 ## but if it failed to do so, you can specify
1594 ## charset encoding you are using here.
1595 ##
1596 ## Note: You can see whether your ncmpcpp build
1597 ## supports charset detection by checking output
1598 ## of `ncmpcpp --version`.
1599 ##
1600 ## Note: Since MPD uses UTF-8 by default, setting
1601 ## this option makes sense only if your encoding
1602 ## is different.
1603 ##
1604 #
1605 #system_encoding = ""
1606 #
1607 ##### delays #####
1608 #
1609 ## Time of inactivity (in seconds) after playlist
1610 ## highlighting will be disabled (0 = always on).
1611 ##
1612 #playlist_disable_highlight_delay = 5
1613 #
1614 ## Defines how long messages are supposed to be visible.
1615 ##
1616 #message_delay_time = 5
1617 #
1618 ##### song format #####
1619 ##
1620 ## For a song format you can use:
1621 ##
1622 ## %l - length
1623 ## %f - filename
1624 ## %D - directory
1625 ## %a - artist
1626 ## %A - album artist
1627 ## %t - title
1628 ## %b - album
1629 ## %y - date
1630 ## %n - track number (01/12 -> 01)
1631 ## %N - full track info (01/12 -> 01/12)
1632 ## %g - genre
1633 ## %c - composer
1634 ## %p - performer
1635 ## %d - disc
1636 ## %C - comment
1637 ## %P - priority
1638 ## $R - begin right alignment
1639 ##
1640 ## If you want to make sure that a part of the format is displayed
1641 ## only when certain tags are present, you can archieve it by
1642 ## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
1643 ## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
1644 ## It is also possible to define a list of alternatives by providing
1645 ## several groups and separating them with '|', e.g. '{%t}|{%f}'
1646 ## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
1647 ## present.
1648 ##
1649 ## Note: If you want to set limit on maximal length of a tag, just
1650 ## put the appropriate number between % and character that defines
1651 ## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
1652 ##
1653 ## In addition, formats support markers used for text attributes.
1654 ## They are followed by character '$'. After that you can put:
1655 ##
1656 ## - 0 - default window color (discards all other colors)
1657 ## - 1 - black
1658 ## - 2 - red
1659 ## - 3 - green
1660 ## - 4 - yellow
1661 ## - 5 - blue
1662 ## - 6 - magenta
1663 ## - 7 - cyan
1664 ## - 8 - white
1665 ## - 9 - end of current color
1666 ## - b - bold text
1667 ## - u - underline text
1668 ## - r - reverse colors
1669 ## - a - use alternative character set
1670 ##
1671 ## If you don't want to use a non-color attribute anymore, just put it
1672 ## again, but this time insert character '/' between '$' and attribute
1673 ## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
1674 ## or filename with reversed colors.
1675 ##
1676 ## If you want to use 256 colors and/or background colors in formats
1677 ## (the naming scheme is described below in section about color
1678 ## definitions), it can be done with the syntax $(COLOR), e.g. to set
1679 ## the artist tag to one of the non-standard colors and make it have
1680 ## yellow background, you need to write $(197_yellow)%a$(end). Note
1681 ## that for standard colors this is interchangable with attributes
1682 ## listed above.
1683 ##
1684 ## Note: colors can be nested.
1685 ##
1686 #
1687 #song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
1688 #
1689 #song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
1690 #
1691 #song_library_format = {%n - }{%t}|{%f}
1692 #
1693 #
1694 #alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
1695 #
1696 #alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
1697 #
1698 #now_playing_prefix = $b
1699 #
1700 #now_playing_suffix = $/b
1701 #
1702 #browser_playlist_prefix = "$2playlist$9 "
1703 #
1704 #selected_item_prefix = $6
1705 #
1706 #selected_item_suffix = $9
1707 #
1708 #modified_item_prefix = $3> $9
1709 #
1710 ##
1711 ## Note: attributes are not supported for the following variables.
1712 ##
1713 #song_window_title_format = {%a - }{%t}|{%f}
1714 ##
1715 ## Note: Below variables are used for sorting songs in browser.
1716 ## The sort mode determines how songs are sorted, and can be used
1717 ## in combination with a sort format to specify a custom sorting format.
1718 ## Available values for browser_sort_mode are "name", "mtime", "format"
1719 ## and "noop".
1720 ##
1721 #
1722 #browser_sort_mode = name
1723 #
1724 #browser_sort_format = {%a - }{%t}|{%f} {(%l)}
1725 #
1726 ##### columns settings #####
1727 ##
1728 ## syntax of song columns list format is "column column etc."
1729 ##
1730 ## - syntax for each column is:
1731 ##
1732 ## (width of the column)[color of the column]{displayed tag}
1733 ##
1734 ## Note: Width is by default in %, if you want a column to
1735 ## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
1736 ## will be the column that take 10% of screen (so the real width
1737 ## will depend on actual screen size), whereas (10f)[white]{a}
1738 ## will take 10 terminal cells, no matter how wide the screen is.
1739 ##
1740 ## - color is optional (if you want the default one,
1741 ## leave the field empty).
1742 ##
1743 ## Note: You can give a column additional attributes by putting appropriate
1744 ## character after displayed tag character. Available attributes are:
1745 ##
1746 ## - r - column will be right aligned
1747 ## - E - if tag is empty, empty tag marker won't be displayed
1748 ##
1749 ## You can also:
1750 ##
1751 ## - give a column custom name by putting it after attributes,
1752 ## separated with character ':', e.g. {lr:Length} gives you
1753 ## right aligned column of lengths named "Length".
1754 ##
1755 ## - define sequence of tags, that have to be displayed in case
1756 ## predecessor is empty in a way similar to the one in classic
1757 ## song format, i.e. using '|' character, e.g. {a|c|p:Owner}
1758 ## creates column named "Owner" that tries to display artist
1759 ## tag and then composer and performer if previous ones are
1760 ## not available.
1761 ##
1762 #
1763 #song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
1764 #
1765 ##### various settings #####
1766 #
1767 ##
1768 ## Note: Custom command that will be executed each
1769 ## time song changes. Useful for notifications etc.
1770 ##
1771 #execute_on_song_change = ""
1772 #
1773 #playlist_show_mpd_host = no
1774 #
1775 #playlist_show_remaining_time = no
1776 #
1777 #playlist_shorten_total_times = no
1778 #
1779 #playlist_separate_albums = no
1780 #
1781 ##
1782 ## Note: Possible display modes: classic, columns.
1783 ##
1784 #playlist_display_mode = columns
1785 #
1786 #browser_display_mode = classic
1787 #
1788 #search_engine_display_mode = classic
1789 #
1790 #playlist_editor_display_mode = classic
1791 #
1792 #discard_colors_if_item_is_selected = yes
1793 #
1794 #incremental_seeking = yes
1795 #
1796 #seek_time = 1
1797 #
1798 #volume_change_step = 2
1799 #
1800 #autocenter_mode = no
1801 #
1802 #centered_cursor = no
1803 #
1804 ##
1805 ## Note: You can specify third character which will
1806 ## be used to build 'empty' part of progressbar.
1807 ##
1808 #progressbar_look = =>
1809 progressbar_look = "─╼╶"
1810 #progressbar_look = "─⊙╶"
1811 #
1812 #progressbar_boldness = yes
1813 #
1814 ## Available values: database, playlist.
1815 ##
1816 #default_place_to_search_in = database
1817 #
1818 ## Available values: classic, alternative.
1819 ##
1820 #user_interface = classic
1821 #
1822 #data_fetching_delay = yes
1823 #
1824 ## Available values: artist, album_artist, date, genre, composer, performer.
1825 ##
1826 #media_library_primary_tag = artist
1827 #
1828 ## Available values: wrapped, normal.
1829 ##
1830 #default_find_mode = wrapped
1831 #
1832 #default_tag_editor_pattern = %n - %t
1833 #
1834 #header_visibility = yes
1835 #
1836 #statusbar_visibility = yes
1837 #
1838 #titles_visibility = yes
1839 #
1840 #header_text_scrolling = yes
1841 #
1842 #cyclic_scrolling = no
1843 #
1844 #lines_scrolled = 2
1845 #
1846 #follow_now_playing_lyrics = no
1847 #
1848 #fetch_lyrics_for_current_song_in_background = no
1849 #
1850 #store_lyrics_in_song_dir = no
1851 #
1852 #generate_win32_compatible_filenames = yes
1853 #
1854 #allow_for_physical_item_deletion = no
1855 #
1856 ##
1857 ## Note: If you set this variable, ncmpcpp will try to
1858 ## get info from last.fm in language you set and if it
1859 ## fails, it will fall back to english. Otherwise it will
1860 ## use english the first time.
1861 ##
1862 ## Note: Language has to be expressed as an ISO 639 alpha-2 code.
1863 ##
1864 #lastfm_preferred_language = en
1865 #
1866 #show_hidden_files_in_local_browser = no
1867 #
1868 ##
1869 ## How shall screen switcher work?
1870 ##
1871 ## - "previous" - switch between the current and previous screen.
1872 ## - "screen1,...,screenN" - switch between given sequence of screens.
1873 ##
1874 ## Screens available for use: help, playlist, browser, search_engine,
1875 ## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
1876 ##
1877 #screen_switcher_mode = playlist, browser
1878 #
1879 ##
1880 ## Note: You can define startup screen
1881 ## by choosing screen from the list above.
1882 ##
1883 #startup_screen = playlist
1884 #
1885 ##
1886 ## Note: You can define startup slave screen
1887 ## by choosing screen from the list above or
1888 ## an empty value for no slave screen.
1889 ##
1890 #startup_slave_screen = ""
1891 #
1892 #startup_slave_screen_focus = no
1893 #
1894 ##
1895 ## Default width of locked screen (in %).
1896 ## Acceptable values are from 20 to 80.
1897 ##
1898 #
1899 #locked_screen_width_part = 50
1900 #
1901 #ask_for_locked_screen_width_part = yes
1902 #
1903 #jump_to_now_playing_song_at_start = yes
1904 #
1905 #ask_before_clearing_playlists = yes
1906 #
1907 #clock_display_seconds = no
1908 #
1909 #display_volume_level = yes
1910 #
1911 #display_bitrate = no
1912 #
1913 #display_remaining_time = no
1914 #
1915 ## Available values: none, basic, extended, perl.
1916 ##
1917 #regular_expressions = perl
1918 #
1919 ##
1920 ## Note: If below is enabled, ncmpcpp will ignore leading
1921 ## "The" word while sorting items in browser, tags in
1922 ## media library, etc.
1923 ##
1924 #ignore_leading_the = no
1925 #
1926 #block_search_constraints_change_if_items_found = yes
1927 #
1928 #mouse_support = yes
1929 #
1930 #mouse_list_scroll_whole_page = yes
1931 #
1932 #empty_tag_marker = <empty>
1933 #
1934 #tags_separator = " | "
1935 #
1936 #tag_editor_extended_numeration = no
1937 #
1938 #media_library_sort_by_mtime = no
1939 #
1940 #enable_window_title = yes
1941 #
1942 ##
1943 ## Note: You can choose default search mode for search
1944 ## engine. Available modes are:
1945 ##
1946 ## - 1 - use mpd built-in searching (no regexes, pattern matching)
1947 ## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
1948 ## but if your mpd is on a remote machine, downloading big database
1949 ## to process it can take a while
1950 ## - 3 - match only exact values (this mode uses mpd function for searching
1951 ## in database and local one for searching in current playlist)
1952 ##
1953 #
1954 #search_engine_default_search_mode = 1
1955 #
1956 #external_editor = nano
1957 #
1958 ## Note: set to yes if external editor is a console application.
1959 ##
1960 #use_console_editor = yes
1961 #
1962 ##### colors definitions #####
1963 ##
1964 ## It is possible to set a background color by setting a color
1965 ## value "<foreground>_<background>", e.g. red_black will set
1966 ## foregound color to red and background color to black.
1967 ##
1968 ## In addition, for terminals that support 256 colors it
1969 ## is possible to set one of them by using a number in range
1970 ## [1, 256] instead of color name, e.g. numerical value
1971 ## corresponding to red_black is 2_1. To find out if the
1972 ## terminal supports 256 colors, run ncmpcpp and check out
1973 ## the bottom of the help screen for list of available colors
1974 ## and their numerical values.
1975 ##
1976 ## Note: due to technical limitations of ncurses, if 256 colors
1977 ## are used, it is possible to either use only the colors with
1978 ## default background color, or all pairs from 1_1 up to 254_127,
1979 ## depending on the ncurses version used.
1980 ##
1981 #
1982 #colors_enabled = yes
1983 #
1984 #empty_tag_color = cyan
1985 #
1986 #header_window_color = default
1987 #
1988 #volume_color = default
1989 #
1990 #state_line_color = default
1991 #
1992 #state_flags_color = default
1993 #
1994 #main_window_color = yellow
1995 #
1996 #color1 = white
1997 #
1998 #color2 = green
1999 #
2000 #main_window_highlight_color = yellow
2001 #
2002 #progressbar_color = black
2003 #
2004 #progressbar_elapsed_color = green
2005 #
2006 #statusbar_color = default
2007 #
2008 #alternative_ui_separator_color = black
2009 #
2010 #active_column_color = red
2011 #
2012 #window_border_color = green
2013 #
2014 #active_window_border = red
2015 #
2016 #+end_src
2017
2018 *** bindings
2019 :PROPERTIES:
2020 :header-args+: :tangle ~/.ncmpcpp/bindings
2021 :END:
2022
2023 #+begin_src conf :tangle no
2024 def_key "j"
2025 scroll_down
2026 def_key "k"
2027 scroll_up
2028
2029 def_key "ctrl-u"
2030 page_up
2031 def_key "ctrl-d"
2032 page_down
2033
2034 def_key "h"
2035 previous_column
2036 def_key "l"
2037 next_column
2038
2039 def_key "."
2040 show_lyrics
2041
2042 def_key "n"
2043 next_found_item
2044 def_key "N"
2045 previous_found_item
2046
2047 def_key "J"
2048 move_sort_order_down
2049 def_key "K"
2050 move_sort_order_up
2051 #+end_src
2052
2053 ** notmuch
2054
2055 *** notmuch-config
2056 :PROPERTIES:
2057 :header-args+: :tangle ~/.notmuch-config
2058 :END:
2059
2060 #+begin_src conf
2061 # .notmuch-config - Configuration file for the notmuch mail system
2062 #
2063 # For more information about notmuch, see https://notmuchmail.org
2064
2065 # Database configuration
2066 #
2067 # The only value supported here is 'path' which should be the top-level
2068 # directory where your mail currently exists and to where mail will be
2069 # delivered in the future. Files should be individual email messages.
2070 # Notmuch will store its database within a sub-directory of the path
2071 # configured here named ".notmuch".
2072 #
2073 [database]
2074 path=/home/amin/oldmail
2075
2076 # User configuration
2077 #
2078 # Here is where you can let notmuch know how you would like to be
2079 # addressed. Valid settings are
2080 #
2081 # name Your full name.
2082 # primary_email Your primary email address.
2083 # other_email A list (separated by ';') of other email addresses
2084 # at which you receive email.
2085 #
2086 # Notmuch will use the various email addresses configured here when
2087 # formatting replies. It will avoid including your own addresses in the
2088 # recipient list of replies, and will set the From address based on the
2089 # address to which the original email was addressed.
2090 #
2091 [user]
2092 name=Amin Bandali
2093 primary_email=amin@aminb.org
2094 other_email=bandali@gnu.org;abandali@uwaterloo.ca;
2095
2096 # Configuration for "notmuch new"
2097 #
2098 # The following options are supported here:
2099 #
2100 # tags A list (separated by ';') of the tags that will be
2101 # added to all messages incorporated by "notmuch new".
2102 #
2103 # ignore A list (separated by ';') of file and directory names
2104 # that will not be searched for messages by "notmuch new".
2105 #
2106 # NOTE: *Every* file/directory that goes by one of those
2107 # names will be ignored, independent of its depth/location
2108 # in the mail store.
2109 #
2110 [new]
2111 tags=new;
2112 #tags=unread;inbox;
2113 ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
2114
2115 # Search configuration
2116 #
2117 # The following option is supported here:
2118 #
2119 # exclude_tags
2120 # A ;-separated list of tags that will be excluded from
2121 # search results by default. Using an excluded tag in a
2122 # query will override that exclusion.
2123 #
2124 [search]
2125 exclude_tags=deleted;spam;
2126
2127 # Maildir compatibility configuration
2128 #
2129 # The following option is supported here:
2130 #
2131 # synchronize_flags Valid values are true and false.
2132 #
2133 # If true, then the following maildir flags (in message filenames)
2134 # will be synchronized with the corresponding notmuch tags:
2135 #
2136 # Flag Tag
2137 # ---- -------
2138 # D draft
2139 # F flagged
2140 # P passed
2141 # R replied
2142 # S unread (added when 'S' flag is not present)
2143 #
2144 # The "notmuch new" command will notice flag changes in filenames
2145 # and update tags, while the "notmuch tag" and "notmuch restore"
2146 # commands will notice tag changes and update flags in filenames
2147 #
2148 [maildir]
2149 synchronize_flags=true
2150
2151 # Cryptography related configuration
2152 #
2153 # The following option is supported here:
2154 #
2155 # gpg_path
2156 # binary name or full path to invoke gpg.
2157 #
2158 [crypto]
2159 gpg_path=gpg
2160 #+end_src
2161
2162 *** pre-new hook
2163 :PROPERTIES:
2164 :header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
2165 :END:
2166
2167 #+begin_src sh
2168 touch /tmp/gnusieve.log
2169 sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
2170 -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
2171 #+end_src
2172
2173 *** post-new hook
2174 :PROPERTIES:
2175 :header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
2176 :END:
2177
2178 #+begin_src sh
2179 # apply sent tag to messages sent by me
2180 notmuch tag -new +sent -- from:amin@aminb.org or from:bandali@gnu.org or from:aminb@gnu.org or from:amin@gnu.org or from:mab@gnu.org or from:abandali@uwaterloo.ca
2181
2182 # initial tagging
2183 notmuch tag -latest -- tag:latest
2184 notmuch tag +inbox +unread +latest -new -- tag:new
2185
2186
2187 # apply tags to lists
2188
2189 # <aminb>
2190 notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
2191 notmuch tag -inbox +lists/haskell-weekly -- folder:amin/lists/haskell-weekly
2192
2193 notmuch tag -inbox +pay -- folder:amin/pay
2194 notmuch tag -inbox +banking -- folder:amin/banking
2195 notmuch tag -inbox +work -- folder:amin/work
2196 # </aminb>
2197
2198 # <uw>
2199 notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
2200 notmuch tag -inbox +uw/cs846 -- folder:uwaterloo/lists/cs846
2201 notmuch tag -inbox +uw/ece750 -- folder:uwaterloo/lists/ece750
2202 notmuch tag -inbox +uw/se212 -- folder:uwaterloo/lists/se212
2203 notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
2204
2205 notmuch tag -inbox +lists/alloytools -- folder:uwaterloo/lists/alloytools
2206 notmuch tag -inbox +lists/clvsingle -- folder:uwaterloo/lists/Clvsingle
2207 notmuch tag -inbox +lists/gsa -- folder:uwaterloo/lists/GSA
2208 notmuch tag -inbox +lists/math-grad -- folder:uwaterloo/lists/Math-grad
2209 notmuch tag -inbox +lists/scs-grads -- folder:uwaterloo/lists/scs-grads
2210 notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
2211 # </uw>
2212
2213 # <gnu>
2214 notmuch tag -inbox +l/emacs-devel -- folder:gnu/l/emacs-devel
2215 notmuch tag -inbox +l/emacs-orgmode -- folder:gnu/l/emacs-orgmode
2216 notmuch tag -inbox +l/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
2217 notmuch tag -inbox +l/fencepost-users -- folder:gnu/l/fencepost-users
2218 notmuch tag -inbox +l/guix-devel -- folder:gnu/l/guix-devel
2219 notmuch tag -inbox +l/guile-devel -- folder:gnu/l/guile-devel
2220 notmuch tag -inbox +l/help-gnu-emacs -- folder:gnu/l/help-gnu-emacs
2221 notmuch tag -inbox +l/info-gnu-emacs -- folder:gnu/l/info-gnu-emacs
2222 notmuch tag -inbox +l/www-commits -- folder:gnu/l/www-commits
2223 notmuch tag -inbox +l/www-discuss -- folder:gnu/l/www-discuss
2224 notmuch tag -inbox +webmasters -- folder:gnu/webmasters
2225
2226 notmuch tag -inbox +l/deepspec -- folder:gnu/l/deepspec
2227 notmuch tag -inbox +l/haskell-cafe -- folder:gnu/l/haskell-cafe
2228 notmuch tag -inbox +l/haskell-art -- folder:gnu/l/haskell-art
2229 notmuch tag -inbox +l/notmuch -- folder:gnu/l/notmuch
2230
2231 notmuch tag -inbox +l/~aminb/test-priv -- folder:gnu/l/~aminb/test-priv
2232 notmuch tag -inbox +l/~sircmpwn/sr.ht-admins -- folder:gnu/l/~sircmpwn/sr.ht-admins
2233 notmuch tag -inbox +l/~sircmpwn/sr.ht-announce -- folder:gnu/l/~sircmpwn/sr.ht-announce
2234 notmuch tag -inbox +l/~sircmpwn/sr.ht-dev -- folder:gnu/l/~sircmpwn/sr.ht-dev
2235 notmuch tag -inbox +l/~sircmpwn/sr.ht-discuss -- folder:gnu/l/~sircmpwn/sr.ht-discuss
2236 # </gnu>
2237
2238 notmuch tag -inbox -unread +archive/notmuch -- path:archive/notmuch/**
2239 notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**
2240 #+end_src
2241
2242 *** notmuch.service
2243 :PROPERTIES:
2244 :header-args+: :tangle ~/.config/systemd/user/notmuch.service
2245 :END:
2246
2247 #+begin_src conf :tangle no
2248 [Unit]
2249 Description=notmuch service
2250
2251 [Service]
2252 Type=oneshot
2253 ExecStart=/usr/bin/notmuch new
2254 StandardOutput=syslog
2255 StandardError=syslog
2256 #+end_src
2257
2258 *** notmuch.timer
2259 :PROPERTIES:
2260 :header-args+: :tangle ~/.config/systemd/user/notmuch.timer
2261 :END:
2262
2263 #+begin_src conf :tangle no
2264 [Unit]
2265 Description=notmuch timer
2266
2267 [Timer]
2268 OnCalendar=*:0/5
2269 Persistent=true
2270 Unit=notmuch.service
2271
2272 [Install]
2273 WantedBy=timers.target
2274 #+end_src
2275
2276 ** pacman
2277
2278 *** conf
2279
2280 #+begin_src conf :tangle /sudo::/etc/pacman.conf :comments none
2281 #
2282 # /etc/pacman.conf
2283 #
2284 # See the pacman.conf(5) manpage for option and repository directives
2285
2286 #
2287 # GENERAL OPTIONS
2288 #
2289 [options]
2290 # The following paths are commented out with their default values listed.
2291 # If you wish to use different paths, uncomment and update the paths.
2292 #RootDir = /
2293 #DBPath = /var/lib/pacman/
2294 #CacheDir = /var/cache/pacman/pkg/
2295 #LogFile = /var/log/pacman.log
2296 #GPGDir = /etc/pacman.d/gnupg/
2297 #HookDir = /etc/pacman.d/hooks/
2298 HoldPkg = pacman glibc
2299 #XferCommand = /usr/bin/curl -L -C - -f -o %o %u
2300 #XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
2301 #CleanMethod = KeepInstalled
2302 #UseDelta = 0.7
2303 Architecture = auto
2304
2305 # Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
2306 #IgnorePkg =
2307 #IgnoreGroup =
2308
2309 #NoUpgrade =
2310 #NoExtract =
2311
2312 # Misc options
2313 #UseSyslog
2314 Color
2315 TotalDownload
2316 CheckSpace
2317 VerbosePkgLists
2318
2319 # By default, pacman accepts packages signed by keys that its local keyring
2320 # trusts (see pacman-key and its man page), as well as unsigned packages.
2321 SigLevel = Required DatabaseOptional
2322 LocalFileSigLevel = Optional
2323 #RemoteFileSigLevel = Required
2324
2325 # NOTE: You must run `pacman-key --init` before first using pacman; the local
2326 # keyring can then be populated with the keys of all Arch/Parabola packagers
2327 # with `pacman-key --populate archlinux` and `pacman-key --populate parabola`.
2328
2329 #
2330 # REPOSITORIES
2331 # - can be defined here or included from another file
2332 # - pacman will search repositories in the order defined here
2333 # - local/custom mirrors can be added here or in separate files
2334 # - repositories listed first will take precedence when packages
2335 # have identical names, regardless of version number
2336 # - URLs will have $repo replaced by the name of the current repo
2337 # - URLs will have $arch replaced by the name of the architecture
2338 #
2339 # Repository entries are of the format:
2340 # [repo-name]
2341 # Server = ServerName
2342 # Include = IncludePath
2343 #
2344 # The header [repo-name] is crucial - it must be present and
2345 # uncommented to enable the repo.
2346 #
2347
2348 # The testing repositories are disabled by default. To enable, uncomment the
2349 # repo name header and Include lines. You can add preferred servers immediately
2350 # after the header, and they will be used before the default mirrors.
2351
2352 # NOTE: Nonprism is a particular repository that aims to provide software built
2353 # and patched without services under global data surveillance programs like PRISM,
2354 # XKeyscore and Tempora. For more info see: https://wiki.parabola.nu/Nonprism
2355
2356 #[nonprism-testing]
2357 #Include = /etc/pacman.d/mirrorlist
2358
2359 #[nonprism]
2360 #Include = /etc/pacman.d/mirrorlist
2361
2362 [libre-testing]
2363 Include = /etc/pacman.d/mirrorlist
2364
2365 [libre]
2366 Include = /etc/pacman.d/mirrorlist
2367
2368 #[testing]
2369 #Include = /etc/pacman.d/mirrorlist
2370
2371 [core]
2372 Include = /etc/pacman.d/mirrorlist
2373
2374 [extra]
2375 Include = /etc/pacman.d/mirrorlist
2376
2377 #[community-testing]
2378 #Include = /etc/pacman.d/mirrorlist
2379
2380 [community]
2381 Include = /etc/pacman.d/mirrorlist
2382
2383 # The PCR (Parabola Community Repository) contains packages maintained by trusted
2384 # members of the Parabola community. It also contains packages maintained by
2385 # Parabola developers, but that the developer decided didn't belong in core/libre.
2386
2387 #[pcr-testing]
2388 #Include = /etc/pacman.d/mirrorlist
2389
2390 [pcr]
2391 Include = /etc/pacman.d/mirrorlist
2392
2393 # If you want to run 32 bit applications on your x86_64 system,
2394 # enable the libre-multilib, multilib and pcr-multilib repositories as required here.
2395
2396 #[nonprism-multilib-testing]
2397 #Include = /etc/pacman.d/mirrorlist
2398
2399 #[nonprism-multilib]
2400 #Include = /etc/pacman.d/mirrorlist
2401
2402 #[libre-multilib-testing]
2403 #Include = /etc/pacman.d/mirrorlist
2404
2405 #[libre-multilib]
2406 #Include = /etc/pacman.d/mirrorlist
2407
2408 #[multilib-testing]
2409 #Include = /etc/pacman.d/mirrorlist
2410
2411 #[multilib]
2412 #Include = /etc/pacman.d/mirrorlist
2413
2414 #[pcr-multilib-testing]
2415 #Include = /etc/pacman.d/mirrorlist
2416
2417 #[pcr-multilib]
2418 #Include = /etc/pacman.d/mirrorlist
2419
2420 # Parabola also supports another community projects and personal repositories, to
2421 # find them check out this wiki page: https://wiki.parabola.nu/Repositories
2422
2423 # An example of a custom package repository. See the pacman manpage for
2424 # tips on creating your own repositories.
2425 #[custom]
2426 #SigLevel = Optional TrustAll
2427 #Server = file:///home/custompkgs
2428
2429 Include = /etc/pacman.d/*.conf
2430 #+end_src
2431
2432 *** mirrorlist
2433
2434 #+begin_src conf :tangle /sudo::/etc/pacman.d/mirrorlist :comments none
2435 # Parabola GNU/Linux-libre - Last Updated: Wed Dec 20 02:59:35 GMT 2017
2436
2437 Server = http://mirror.fsf.org/parabola/$repo/os/$arch
2438 Server = http://mirror.fsf.org/parabola/$repo/os/$arch
2439 Server = http://mirror.fsf.org/parabola/$repo/os/$arch
2440 Server = http://mirror.fsf.org/parabola/$repo/os/$arch
2441
2442 # Location: London, UK
2443 # Responsible: Parabola Project
2444 # Note: Not really a mirror, automatically redirects you to an Arch
2445 # mirror when possible. Works best specifying it a few times in a
2446 # row (404s workaround).
2447 # Server = http://redirector.parabola.nu/$repo/os/$arch
2448 Server = https://redirector.parabola.nu/$repo/os/$arch
2449
2450 # Location: Reykjavík, Iceland
2451 # Responsible: Parabola Project
2452 # Note: Not really a mirror, automatically redirects you to a Parabola
2453 # mirror that has the file you are looking for.
2454 # Server = http://repomirror.parabola.nu/$repo/os/$arch
2455 Server = https://repomirror.parabola.nu/$repo/os/$arch
2456
2457 # Location: Falkenstein, Germany
2458 # Server = http://mirror.grapentin.org/parabola/$repo/os/$arch
2459 Server = https://mirror.grapentin.org/parabola/$repo/os/$arch
2460
2461 # Location: Volendam, Netherlands
2462 Server = https://jeweet.net/repo/parabola/$repo/os/$arch
2463
2464 # Location: Amsterdam, Netherlands
2465 # Note: Not really a mirror, but a high-speed 10GiB cache for
2466 # mirror.yandex.ru/mirrors/parabola
2467 # Server = http://parabola.isacdaavid.info:8080/$repo/os/$arch
2468 Server = https://parabola.isacdaavid.info:8081/$repo/os/$arch
2469
2470 # Location: Moscow, Russian Federation
2471 # Server = http://mirror.yandex.ru/mirrors/parabola/$repo/os/$arch
2472 Server = https://mirror.yandex.ru/mirrors/parabola/$repo/os/$arch
2473
2474 # Location: Ho Chi Minh City, Vietnam
2475 # Server = http://mirror.freedif.org/Parabola/$repo/os/$arch
2476 Server = https://mirror.freedif.org/Parabola/$repo/os/$arch
2477
2478 # Location: Los Angeles, CA, USA
2479 # Note: Also visit http://alfplayer.com/ for its SNAPSHOTS ARCHIVE
2480 Server = http://alfplayer.com/parabola/$repo/os/$arch
2481
2482 # Location: Boston, MA, USA
2483 Server = http://mirror.fsf.org/parabola/$repo/os/$arch
2484
2485 # Location: Austin, TX, USA
2486 # Server = http://parabola.serverpit.com/
2487 Server = https://parabola.serverpit.com/
2488
2489 # Location: Reykjavík, Iceland
2490 # Responsible: Parabola Project
2491 # Note: Currently pointing to repomirror.parabola.nu
2492 # Server = http://repo.parabola.nu/$repo/os/$arch
2493 Server = https://repo.parabola.nu/$repo/os/$arch
2494 #+end_src
2495
2496 ** pigeonhole
2497 *** amin.sieve
2498 :PROPERTIES:
2499 :header-args+: :tangle ~/mail/bndl.org/amin/sieve/amin.sieve :comments none
2500 :END:
2501
2502 #+begin_src conf
2503 require ["regex", "variables", "fileinto", "envelope",
2504 "mailbox", "imap4flags", "include"];
2505
2506 # webmasters
2507 if anyof (
2508 address :is "from" ["webmasters@gnu.org", "webmasters-comment@gnu.org"]) {
2509 fileinto :create "gnu.webmasters";
2510 stop;
2511 }
2512
2513 include :personal "lists";
2514 #+end_src
2515
2516 *** lists.sieve
2517 :PROPERTIES:
2518 :header-args+: :tangle ~/mail/bndl.org/amin/sieve/lists.sieve :comments none
2519 :END:
2520
2521 #+begin_src conf
2522 require ["regex", "variables", "fileinto", "envelope",
2523 "mailbox", "imap4flags", "include"];
2524
2525 # mailing lists
2526 if anyof (
2527 header :contains "list-id"
2528 [ "<emacs-devel.gnu.org>"
2529 , "<emacs-orgmode.gnu.org>"
2530 , "<emacsconf-discuss.gnu.org>"
2531 , "<fencepost-users.gnu.org>"
2532 , "<guix-devel.gnu.org>"
2533 , "<guile-devel.gnu.org>"
2534 , "<help-gnu-emacs.gnu.org>"
2535 , "<info-gnu-emacs.gnu.org>"
2536 , "<info-guix.gnu.org>"
2537 , "<www-commits.gnu.org>"
2538 , "<www-discuss.gnu.org>"
2539 , "<deepspec.lists.cs.princeton.edu>"
2540 , "<haskell-cafe.haskell.org>"
2541 , "<haskell-art.we.lurk.org>"
2542 , "<notmuch.notmuchmail.org>"
2543 ] ) {
2544 if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
2545 set :lower "listname" "${1}";
2546 fileinto :create "gnu.${listname}";
2547 stop;
2548 }
2549 }
2550
2551 # sr.ht lists, with dots ('.') omitted
2552 if anyof (
2553 header :contains "list-id"
2554 [ "<~bandali/public-inbox@lists.sr.ht>"
2555 , "<~sircmpwn/sr.ht-admins@lists.sr.ht>"
2556 , "<~sircmpwn/sr.ht-announce@lists.sr.ht>"
2557 , "<~sircmpwn/sr.ht-dev@lists.sr.ht>"
2558 , "<~sircmpwn/sr.ht-discuss@lists.sr.ht>"
2559 ] ) {
2560 if header :regex "list-id" "(~[a-z_0-9-]+)/([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)\\.?([^.]*)@" {
2561 set :lower "username" "${1}";
2562 set :lower "listname" "${2}${3}${4}${5}${6}${7}";
2563 fileinto :create "gnu.${username}.${listname}";
2564 stop;
2565 }
2566 }
2567 #+end_src
2568
2569 ** PowerTOP
2570 :PROPERTIES:
2571 :header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
2572 :END:
2573
2574 #+begin_src conf
2575 [Unit]
2576 Description=Powertop tunings
2577
2578 [Service]
2579 ExecStart=/usr/bin/powertop --auto-tune
2580 RemainAfterExit=true
2581
2582 [Install]
2583 WantedBy=multi-user.target
2584 #+end_src
2585
2586 ** redshift
2587 :PROPERTIES:
2588 :header-args+: :tangle ~/.config/redshift.conf :comments none
2589 :END:
2590
2591 #+begin_src conf
2592 ; Global settings for redshift
2593 [redshift]
2594 ; Set the day and night screen temperatures (Neutral is 6500K)
2595 ;temp-day=5700
2596 ;temp-night=3500
2597
2598 ;temp-day=6500
2599 temp-day=6200
2600 ;temp-night=4800
2601 ;temp-night=5000
2602 ;temp-night=4500
2603 temp-night=4000
2604
2605 ; Enable/Disable a smooth transition between day and night
2606 ; 0 will cause a direct change from day to night screen temperature.
2607 ; 1 will gradually increase or decrease the screen temperature.
2608 transition=1
2609
2610 ; Set the screen brightness. Default is 1.0.
2611 ;brightness=0.9
2612 ; It is also possible to use different settings for day and night
2613 ; since version 1.8.
2614 ;brightness-day=0.7
2615 ;brightness-night=0.4
2616 ; Set the screen gamma (for all colors, or each color channel
2617 ; individually)
2618 ;gamma=0.8
2619 ;gamma=1.0
2620 ;gamma=0.8:0.7:0.8
2621 ; This can also be set individually for day and night since
2622 ; version 1.10.
2623 ;gamma-day=0.8:0.7:0.8
2624 ;gamma-night=0.6
2625
2626 ; Set the location-provider: 'geoclue2' or 'manual'
2627 ; type 'redshift -l list' to see possible values.
2628 ; The location provider settings are in a different section.
2629 ;location-provider=manual
2630 location-provider=geoclue2
2631
2632 ; Set the adjustment-method: 'randr', 'vidmode'
2633 ; type 'redshift -m list' to see all possible values.
2634 ; 'randr' is the preferred method, 'vidmode' is an older API.
2635 ; but works in some cases when 'randr' does not.
2636 ; The adjustment method settings are in a different section.
2637 adjustment-method=randr
2638
2639 ; Configuration of the location-provider:
2640 ; type 'redshift -l PROVIDER:help' to see the settings.
2641 ; ex: 'redshift -l manual:help'
2642 ; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
2643 ; are negative numbers.
2644 ;[manual]
2645 ;lat=48.1
2646 ;lon=11.6
2647
2648 ; Configuration of the adjustment-method
2649 ; type 'redshift -m METHOD:help' to see the settings.
2650 ; ex: 'redshift -m randr:help'
2651 ; In this example, randr is configured to adjust screen 1.
2652 ; Note that the numbering starts from 0, so this is actually the
2653 ; second screen. If this option is not specified, Redshift will try
2654 ; to adjust _all_ screens.
2655 ;[randr]
2656 ;screen=1
2657 #+end_src
2658
2659 ** rofi
2660 :PROPERTIES:
2661 :header-args+: :tangle ~/.config/rofi/config
2662 :END:
2663
2664 #+begin_src conf
2665 ! rofi.font: Ubuntu Mono 13
2666 ! rofi.font: Inconsolata 16
2667 ! rofi.font: Iosevka 13
2668 ! rofi.font: Source Code Pro 11
2669 rofi.font: Source Code Pro 10.5
2670 rofi.modi: run,window
2671 ! rofi.width: 640
2672 rofi.width: 600
2673 !rofi.location: 2
2674 !rofi.yoffset: 200
2675 rofi.monitor: -1
2676 !rofi.lines: 10
2677
2678 !rofi.theme: /usr/share/rofi/themes//Arc.rasi
2679 !rofi.theme: /usr/share/rofi/themes//Paper.rasi
2680 !rofi.theme: /usr/share/rofi/themes//sidebar.rasi
2681
2682 rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
2683 #+end_src
2684
2685 ** rofi-pass
2686 :PROPERTIES:
2687 :header-args+: :tangle ~/.config/rofi-pass/config
2688 :END:
2689
2690 #+begin_src conf
2691 # permanently set alternative root dir
2692 # root=/path/to/root
2693
2694 # rofi command. Make sure to have "$@" as last argument
2695 _rofi () {
2696 #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
2697 rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
2698 }
2699
2700 # xdotool needs the keyboard layout to be set using setxkbmap
2701 # You can do this in your autostart scripts (e.g. xinitrc)
2702
2703 # If for some reason, you cannot do this, you can set the command here.
2704 # and set fix_layout to true
2705 fix_layout=false
2706
2707 layout_cmd () {
2708 setxkbmap us
2709 }
2710
2711 # fields to be used
2712 URL_field='url'
2713 USERNAME_field='user'
2714 AUTOTYPE_field='autotype'
2715
2716 # delay to be used for :delay keyword
2717 delay=2
2718
2719 ## Programs to be used
2720 # Editor
2721 EDITOR='gvim -f'
2722
2723 # Browser
2724 BROWSER='chromium'
2725
2726 ## Misc settings
2727
2728 default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
2729 auto_enter='false'
2730 notify='false'
2731 default_autotype='user :tab pass'
2732
2733 # color of the help messages
2734 # leave empty for autodetection
2735 help_color="#4872FF"
2736
2737 # Clipboard settings
2738 # Possible options: primary, clipboard, both
2739 clip=primary
2740
2741 # Options for generating new password entries
2742 # default_user is also used for password files that have no user field.
2743 default_user=aminb
2744 default_user2=bandali
2745 password_length=30
2746
2747 # Custom Keybindings
2748 #autotype="Alt+1"
2749 autotype="Alt+m"
2750 type_user="Alt+2"
2751 type_pass="Alt+3"
2752 open_url="Alt+4"
2753 copy_name="Alt+u"
2754 copy_url="Alt+l"
2755 copy_pass="Alt+p"
2756 show="Alt+o"
2757 copy_entry="Alt+2"
2758 type_entry="Alt+1"
2759 copy_menu="Alt+c"
2760 action_menu="Alt+a"
2761 type_menu="Alt+t"
2762 help="Alt+h"
2763 switch="Alt+x"
2764 insert_pass="Alt+n"
2765 #+end_src
2766
2767 ** sway
2768
2769 *** main
2770 :PROPERTIES:
2771 :header-args+: :tangle ~/.config/sway/config
2772 :END:
2773
2774 #+begin_src conf
2775 ### Variables
2776 # super
2777 set $mod Mod4
2778 # alt
2779 set $mod2 Mod1
2780 set $left h
2781 set $down j
2782 set $up k
2783 set $right l
2784 set $term alacritty
2785 set $term2 urxvt
2786 set $menu rofi -show run -display-run '> ' -display-window ' 🗔 '
2787
2788 ### Output configuration
2789 #
2790 # Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/)
2791 output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
2792 #
2793 # Example configuration:
2794 #
2795 # output HDMI-A-1 resolution 1920x1080 position 1920,0
2796 #
2797 # You can get the names of your outputs by running: swaymsg -t get_outputs
2798
2799 output DP-1 res 2560x1440 pos 0,0
2800 # 597 = (2560/2) - (1366/2)
2801 output LVDS-1 pos 597,1440
2802
2803 ### Idle configuration
2804
2805 exec swayidle \
2806 timeout 120 '[ -f ~/.nosleep ] || swaymsg "output * dpms off"' \
2807 resume '[ -f ~/.nosleep ] || swaymsg "output * dpms on"' \
2808
2809
2810 ### Key bindings
2811 #
2812 # Basics:
2813 #
2814 # start a terminal
2815 bindsym $mod+Return exec $term
2816 bindsym $mod+Shift+Return exec $term2
2817
2818 # kill focused window
2819 bindsym $mod+Shift+q kill
2820
2821 # start your launcher
2822 bindsym $mod+d exec $menu
2823
2824 # password manager
2825 bindsym $mod2+space exec rofi-pass
2826
2827 # Drag floating windows by holding down $mod and left mouse button.
2828 # Resize them with right mouse button + $mod.
2829 # Despite the name, also works for non-floating windows.
2830 # Change normal to inverse to use left mouse button for resizing and right
2831 # mouse button for dragging.
2832 floating_modifier $mod normal
2833
2834 # reload the configuration file
2835 bindsym $mod+Shift+c reload
2836
2837 # exit sway (logs you out of your wayland session)
2838 # bindsym $mod+Shift+e exit
2839
2840 bindsym $mod+apostrophe exec rofi-light # rofi-based brightness chooser
2841 bindsym XF86MonBrightnessUp exec light -A 5 # increase screen brightness
2842 bindsym XF86MonBrightnessDown exec light -U 5 # decrease screen brightness
2843
2844 bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
2845 bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
2846 bindsym XF86AudioMute exec pamixer --toggle-mute
2847 bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
2848
2849 bindsym $mod+Shift+apostrophe exec rofi-remmina.py # choose remmina connection
2850
2851 # original sway workspace switch and window move
2852 bindsym $mod+bracketleft workspace prev
2853 bindsym $mod+bracketright workspace next
2854 bindsym $mod+braceleft move container to workspace prev
2855 bindsym $mod+braceright move container to workspace next
2856
2857 # bspwm-esque workspace switch and window move
2858 bindsym $mod2+bracketleft exec sway-ws-util switch prev
2859 bindsym $mod2+bracketright exec sway-ws-util switch next
2860 bindsym $mod2+braceleft exec sway-ws-util move prev follow
2861 bindsym $mod2+braceright exec sway-ws-util move next follow
2862 #
2863 # Moving around:
2864 #
2865 # Move your focus around
2866 bindsym $mod+$left focus left
2867 bindsym $mod+$down focus down
2868 bindsym $mod+$up focus up
2869 bindsym $mod+$right focus right
2870 # or use $mod+[up|down|left|right]
2871 bindsym $mod+Left focus left
2872 bindsym $mod+Down focus down
2873 bindsym $mod+Up focus up
2874 bindsym $mod+Right focus right
2875
2876 # _move_ the focused window with the same, but add Shift
2877 bindsym $mod+Shift+$left move left
2878 bindsym $mod+Shift+$down move down
2879 bindsym $mod+Shift+$up move up
2880 bindsym $mod+Shift+$right move right
2881 # ditto, with arrow keys
2882 bindsym $mod+Shift+Left move left
2883 bindsym $mod+Shift+Down move down
2884 bindsym $mod+Shift+Up move up
2885 bindsym $mod+Shift+Right move right
2886 #
2887 # Workspaces:
2888 #
2889 # switch to workspace
2890 bindsym $mod+1 workspace 1
2891 bindsym $mod+2 workspace 2
2892 bindsym $mod+3 workspace 3
2893 bindsym $mod+4 workspace 4
2894 bindsym $mod+5 workspace 5
2895 bindsym $mod+6 workspace 6
2896 bindsym $mod+7 workspace 7
2897 bindsym $mod+8 workspace 8
2898 bindsym $mod+9 workspace 9
2899 bindsym $mod+0 workspace 10
2900 # move focused container to workspace
2901 bindsym $mod+Shift+1 move container to workspace 1
2902 bindsym $mod+Shift+2 move container to workspace 2
2903 bindsym $mod+Shift+3 move container to workspace 3
2904 bindsym $mod+Shift+4 move container to workspace 4
2905 bindsym $mod+Shift+5 move container to workspace 5
2906 bindsym $mod+Shift+6 move container to workspace 6
2907 bindsym $mod+Shift+7 move container to workspace 7
2908 bindsym $mod+Shift+8 move container to workspace 8
2909 bindsym $mod+Shift+9 move container to workspace 9
2910 bindsym $mod+Shift+0 move container to workspace 10
2911 # Note: workspaces can have any name you want, not just numbers.
2912 # We just use 1-10 as the default.
2913 #
2914 # Layout stuff:
2915 #
2916 # You can "split" the current object of your focus with
2917 # $mod+b or $mod+v, for horizontal and vertical splits
2918 # respectively.
2919 bindsym $mod+b splith
2920 bindsym $mod+v splitv
2921
2922 # Switch the current container between different layout styles
2923 bindsym $mod+s layout stacking
2924 bindsym $mod+w layout tabbed
2925 bindsym $mod+e layout toggle split
2926
2927 # Make the current focus fullscreen
2928 bindsym $mod+f fullscreen
2929
2930 # Toggle sticky-ness of the current (floating) window
2931 bindsym $mod+$mod2+space sticky toggle
2932
2933 # Toggle the current focus between tiling and floating mode
2934 bindsym $mod+Shift+space floating toggle
2935
2936 # Swap focus between the tiling area and the floating area
2937 bindsym $mod+space focus mode_toggle
2938
2939 # move focus to the parent container
2940 bindsym $mod+a focus parent
2941 #
2942 # Scratchpad:
2943 #
2944 # Sway has a "scratchpad", which is a bag of holding for windows.
2945 # You can send windows there and get them back later.
2946
2947 # Move the currently focused window to the scratchpad
2948 bindsym $mod+Shift+minus move scratchpad
2949
2950 # Show the next scratchpad window or hide the focused scratchpad window.
2951 # If there are multiple scratchpad windows, this command cycles through them.
2952 bindsym $mod+minus scratchpad show
2953 #
2954 # Resizing containers:
2955 #
2956 mode "resize" {
2957 # left will shrink the containers width
2958 # right will grow the containers width
2959 # up will shrink the containers height
2960 # down will grow the containers height
2961 bindsym $left resize shrink width 10px
2962 bindsym $down resize grow height 10px
2963 bindsym $up resize shrink height 10px
2964 bindsym $right resize grow width 10px
2965
2966 # ditto, with arrow keys
2967 bindsym Left resize shrink width 10px
2968 bindsym Down resize grow height 10px
2969 bindsym Up resize shrink height 10px
2970 bindsym Right resize grow width 10px
2971
2972 # return to default mode
2973 bindsym Return mode "default"
2974 bindsym Escape mode "default"
2975 }
2976 bindsym $mod+Shift+r mode "resize"
2977
2978 #
2979 # Power button
2980 #
2981
2982 set $mode_system System (l)ock, (e)xit sway, (s)uspend, (h)ibernate, (r)eboot, (S)hutdown
2983 mode "$mode_system" {
2984 bindsym l exec swaylock, mode "default"
2985 bindsym e exec swaymsg exit, mode "default"
2986 bindsym s exec systemctl suspend, mode "default"
2987 bindsym h exec systemctl hibernate, mode "default"
2988 bindsym r exec systemctl reboot, mode "default"
2989 bindsym Shift+s exec systemctl poweroff -i, mode "default"
2990
2991 # back to normal: Enter, Escape, or q
2992 bindsym Return mode "default"
2993 bindsym Escape mode "default"
2994 bindsym q mode "default"
2995 }
2996 # bindsym XF86PowerOff mode "$mode_system"
2997 bindsym $mod+Shift+e mode "$mode_system"
2998
2999 #
3000 # Presentation mode
3001 #
3002
3003 bindsym $mod+$mod2+p exec ([ ! -e ~/.nosleep ] && touch ~/.nosleep || rm ~/.nosleep) && killall -USR1 i3status
3004
3005 #
3006 # Notifications
3007 #
3008
3009 bindsym $mod+Shift+n mode notifications
3010 mode notifications {
3011 bindsym Return exec makoctl invoke; exec makoctl dismiss; mode default
3012 bindsym d exec makoctl dismiss; mode default
3013 bindsym Shift+d exec makoctl dismiss -a; mode default
3014
3015 bindsym Escape mode default
3016 bindsym q mode default
3017 }
3018
3019 #
3020 # Screenshotting
3021 #
3022
3023 bindsym $mod+Shift+s mode screenshot
3024 mode screenshot {
3025 bindsym a exec grim $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
3026 bindsym r exec slurp | grim -g - $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
3027
3028 bindsym Escape mode default
3029 bindsym q mode default
3030 }
3031
3032 #
3033 # Window configurations
3034 #
3035 for_window [class="mpv"] floating enable
3036 for_window [class="TelegramDesktop"] floating enable
3037 for_window [app_id="pavucontrol"] floating enable
3038 for_window [app_id="meld"] floating enable
3039 for_window [app_id="nm-connection-editor"] floating enable
3040
3041 set $blue #285577
3042 set $gray #1e1f21
3043 set $red #900000
3044
3045 #
3046 # Status Bar:
3047 #
3048 # Read `man 5 sway-bar` for more information about this section.
3049 bar {
3050 position bottom
3051 colors {
3052 background $gray
3053 inactive_workspace $gray $gray #888888
3054 active_workspace $gray $gray #ffffff
3055 urgent_workspace $red $red #ffffff
3056 focused_workspace $blue $blue #ffffff
3057 }
3058 status_command i3status | my-i3status.py
3059 }
3060
3061 client.focused $blue $blue #ffffff $blue $blue
3062 client.unfocused $gray $gray #ffffff $gray $gray
3063 client.focused_inactive $gray $gray #ffffff $gray $gray
3064
3065 # font pango: benis uushi 9
3066 # font pango: Ubuntu Mono 11
3067 # font pango: Inconsolata 11
3068 font pango: DejaVu Sans Mono 9
3069 # font pango: Liberation Mono 9
3070
3071 # get rid of title bars
3072 default_border pixel 4
3073
3074 exec xrdb .Xresources
3075 # exec pgrep -x "systemd-inhibit" || \
3076 # systemd-inhibit --what=handle-power-key --who=aminb \
3077 # --why="Handle power button in sway" sleep infinity
3078 exec mako 2>&1 >/tmp/mako.log
3079 exec /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
3080
3081 include /etc/sway/config.d/*
3082 include ~/.config/sway/`hostname`
3083
3084 exec systemd-notify --ready || true
3085
3086 #+end_src
3087
3088 *** langa
3089 :PROPERTIES:
3090 :header-args+: :tangle ~/.config/sway/langa
3091 :END:
3092
3093 #+begin_src conf
3094 input "2:7:SynPS/2_Synaptics_TouchPad" {
3095 events disabled
3096 dwt enabled
3097 tap enabled
3098 natural_scroll enabled
3099 click_method clickfinger
3100 }
3101
3102 input "1:1:AT_Translated_Set_2_keyboard" {
3103 repeat_delay 200
3104 repeat_rate 45
3105 xkb_layout us_ab,ir
3106 xkb_options ctrl:nocaps,altwin:swap_alt_win,grp:shifts_toggle
3107 }
3108
3109 input "65261:24672:technomancy_Atreus" {
3110 repeat_delay 200
3111 repeat_rate 45
3112 }
3113 #+end_src
3114
3115 *** shemshak
3116 :PROPERTIES:
3117 :header-args+: :tangle ~/.config/sway/shemshak
3118 :END:
3119
3120 #+begin_src conf
3121 input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
3122 dwt enabled
3123 tap enabled
3124 natural_scroll enabled
3125 middle_emulation enabled
3126 click_method clickfinger
3127 }
3128
3129 input "1:1:AT_Translated_Set_2_keyboard" {
3130 repeat_delay 200
3131 repeat_rate 45
3132 xkb_layout us,ir
3133 xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
3134 }
3135 #+end_src
3136 ** swaylock
3137 :PROPERTIES:
3138 :header-args+: :tangle ~/.config/swaylock/config
3139 :END:
3140
3141 #+begin_src conf
3142 image=/home/amin/usr/pics/wp/wp2445784-blurred-wallpapers.jpg
3143 scaling=fill
3144 #+end_src
3145 ** systemd
3146
3147 Keep boot messages on tty1 (see [[https://wiki.archlinux.org/index.php/getty#Have_boot_messages_stay_on_tty1][here]])
3148
3149 #+begin_src conf :tangle /sudo::/etc/systemd/system/getty@tty1.service.d/noclear.conf
3150 [Service]
3151 TTYVTDisallocate=no
3152 #+end_src
3153
3154 ** TLP
3155
3156 *** langa
3157
3158 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "langa")) "/sudo::/etc/default/tlp")
3159 # ------------------------------------------------------------------------------
3160 # tlp - Parameters for power saving
3161 # See full explanation: https://linrunner.de/en/tlp/docs/tlp-configuration.html
3162
3163 # Notes:
3164 # - Some parameters are disabled, remove the leading '#' to enable # them;
3165 # shown values are suggestions not defaults
3166 # - Default *: intrinsic default that is effective when the parameter is missing
3167 # or disabled by a leading '#'; use PARAM="" to disable intrinsic defaults for
3168 # parameters with text string values
3169 # - Default <none>: do nothing or use kernel/hardware defaults
3170
3171 # Set to 0 to disable, 1 to enable TLP.
3172 # Default: 0
3173 TLP_ENABLE=1
3174
3175 # Operation mode when no power supply can be detected: AC, BAT.
3176 # Concerns some desktop and embedded hardware only.
3177 # Default: <none>
3178 TLP_DEFAULT_MODE=AC
3179
3180 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
3181 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
3182 # Default: 0
3183 TLP_PERSISTENT_DEFAULT=0
3184
3185 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
3186 # Non-zero value enables, zero disables laptop mode.
3187 # Default: 0 (AC), 2 (BAT)
3188 DISK_IDLE_SECS_ON_AC=0
3189 DISK_IDLE_SECS_ON_BAT=2
3190
3191 # Dirty page values (timeouts in secs).
3192 # Default: 15 (AC + BAT)
3193 MAX_LOST_WORK_SECS_ON_AC=15
3194 MAX_LOST_WORK_SECS_ON_BAT=60
3195
3196 # Note: CPU parameters below are disabled by default, remove the leading #
3197 # to enable them, otherwise kernel defaults will be used.
3198
3199 # Select a CPU frequency scaling governor.
3200 # Intel Core i processor with intel_pstate driver:
3201 # powersave(*), performance.
3202 # Older hardware with acpi-cpufreq driver:
3203 # ondemand(*), powersave, performance, conservative, schedutil.
3204 # (*) is recommended.
3205 # Use tlp-stat -p to show the active driver and available governors.
3206 # Important:
3207 # powersave for intel_pstate and ondemand for acpi-cpufreq are power
3208 # efficient for *almost all* workloads and therefore kernel and most
3209 # distributions have chosen them as defaults. If you still want to change,
3210 # you should know what you're doing! You *must* disable your distribution's
3211 # governor settings or conflicts will occur.
3212 # Default: <none>
3213 #CPU_SCALING_GOVERNOR_ON_AC=powersave
3214 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
3215
3216 # Set the min/max frequency available for the scaling governor.
3217 # Possible values depend on your CPU. For available frequencies see
3218 # the output of tlp-stat -p.
3219 # Default: <none>
3220 #CPU_SCALING_MIN_FREQ_ON_AC=0
3221 #CPU_SCALING_MAX_FREQ_ON_AC=0
3222 #CPU_SCALING_MIN_FREQ_ON_BAT=0
3223 #CPU_SCALING_MAX_FREQ_ON_BAT=0
3224
3225 # Set energy performance hints (HWP) for Intel P-state governor:
3226 # performance, balance_performance, default, balance_power, power
3227 # Values are given in order of increasing power saving.
3228 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
3229 # Default: <none>
3230 CPU_HWP_ON_AC=balance_performance
3231 CPU_HWP_ON_BAT=balance_power
3232
3233 # Set Intel P-state performance: 0..100 (%).
3234 # Limit the max/min P-state to control the power dissipation of the CPU.
3235 # Values are stated as a percentage of the available performance.
3236 # Requires an Intel Core i processor with intel_pstate driver.
3237 # Default: <none>
3238 #CPU_MIN_PERF_ON_AC=0
3239 #CPU_MAX_PERF_ON_AC=100
3240 #CPU_MIN_PERF_ON_BAT=0
3241 #CPU_MAX_PERF_ON_BAT=30
3242
3243 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
3244 # Requires an Intel Core i processor.
3245 # Important:
3246 # - This may conflict with your distribution's governor settings
3247 # - A value of 1 does *not* activate boosting, it just allows it
3248 # Default: <none>
3249 #CPU_BOOST_ON_AC=1
3250 #CPU_BOOST_ON_BAT=0
3251
3252 # Minimize number of used CPU cores/hyper-threads under light load conditions:
3253 # 0=disable, 1=enable.
3254 # Default: <none>
3255 SCHED_POWERSAVE_ON_AC=0
3256 SCHED_POWERSAVE_ON_BAT=1
3257
3258 # Kernel NMI Watchdog:
3259 # 0=disable (default, saves power), 1=enable (for kernel debugging only).
3260 # Default: <none>
3261 NMI_WATCHDOG=0
3262
3263 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
3264 # Frequency voltage pairs are written to:
3265 # /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
3266 # CAUTION: only use this, if you thoroughly understand what you are doing!
3267 # Default: <none>.
3268 #PHC_CONTROLS="F:V F:V F:V F:V"
3269
3270 # Set CPU performance versus energy savings policy:
3271 # performance, balance-performance, default, balance-power, power.
3272 # Values are given in order of increasing power saving.
3273 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
3274 # Default: <none>
3275 ENERGY_PERF_POLICY_ON_AC=performance
3276 ENERGY_PERF_POLICY_ON_BAT=balance-power
3277
3278 # Disk devices; separate multiple devices with spaces.
3279 # Devices can be specified by disk ID also (lookup with: tlp diskid).
3280 # Note: DISK parameters below are effective only when this option is configured.
3281 # Default: "nvme0n1 sda"
3282 DISK_DEVICES="sda sdb"
3283
3284 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
3285 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
3286 # Separate values for multiple disks with spaces. Use the special value 'keep'
3287 # to keep the hardware default for the particular disk.
3288 # Default: <none>
3289 DISK_APM_LEVEL_ON_AC="254 254"
3290 DISK_APM_LEVEL_ON_BAT="128 128"
3291
3292 # Hard disk spin down timeout:
3293 # 0: spin down disabled
3294 # 1..240: timeouts from 5s to 20min (in units of 5s)
3295 # 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
3296 # See 'man hdparm' for details.
3297 # Separate values for multiple disks with spaces. Use the special value 'keep'
3298 # to keep the hardware default for the particular disk.
3299 # Default: <none>
3300 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
3301 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
3302
3303 # Select I/O scheduler for the disk devices.
3304 # Multi queue (blk-mq) schedulers:
3305 # mq-deadline(*), none, kyber, bfq
3306 # Single queue schedulers:
3307 # deadline(*), cfq, bfq, noop
3308 # (*) recommended.
3309 # Separate values for multiple disks with spaces. Use the special value 'keep'
3310 # to keep the kernel default scheduler for the particular disk.
3311 # Notes:
3312 # - Multi queue (blk-mq) may need kernel boot option 'scsi_mod.use_blk_mq=1'
3313 # and 'modprobe mq-deadline-iosched|kyber|bfq' on kernels < 5.0
3314 # - Single queue schedulers are legacy now and were removed together with
3315 # the old block layer in kernel 5.0
3316 # Default: keep
3317 #DISK_IOSCHED="mq-deadline mq-deadline"
3318
3319 # AHCI link power management (ALPM) for disk devices:
3320 # min_power, med_power_with_dipm(*), medium_power, max_performance.
3321 # (*) Kernel >= 4.15 required, then recommended.
3322 # Multiple values separated with spaces are tried sequentially until success.
3323 # Default: <none>
3324 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
3325 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
3326
3327 # Exclude host devices from AHCI link power management.
3328 # Separate multiple hosts with spaces.
3329 # Default: <none>
3330 #SATA_LINKPWR_BLACKLIST="host1"
3331
3332 # Runtime Power Management for AHCI host and disks devices:
3333 # on=disable, auto=enable.
3334 # EXPERIMENTAL ** WARNING: auto may cause system lockups/data loss.
3335 # Default: <none>
3336 #AHCI_RUNTIME_PM_ON_AC=on
3337 #AHCI_RUNTIME_PM_ON_BAT=on
3338
3339 # Seconds of inactivity before disk is suspended.
3340 # Note: effective only when AHCI_RUNTIME_PM_ON_AC/BAT is activated.
3341 # Default: 15
3342 AHCI_RUNTIME_PM_TIMEOUT=15
3343
3344 # PCI Express Active State Power Management (PCIe ASPM):
3345 # default(*), performance, powersave.
3346 # (*) keeps BIOS ASPM defaults (recommended)
3347 # Default: <none>
3348 #PCIE_ASPM_ON_AC=default
3349 #PCIE_ASPM_ON_BAT=default
3350
3351 # Set the min/max/turbo frequency for the Intel GPU.
3352 # Possible values depend on your hardware. For available frequencies see
3353 # the output of tlp-stat -g.
3354 # Default: <none>
3355 #INTEL_GPU_MIN_FREQ_ON_AC=0
3356 #INTEL_GPU_MIN_FREQ_ON_BAT=0
3357 #INTEL_GPU_MAX_FREQ_ON_AC=0
3358 #INTEL_GPU_MAX_FREQ_ON_BAT=0
3359 #INTEL_GPU_BOOST_FREQ_ON_AC=0
3360 #INTEL_GPU_BOOST_FREQ_ON_BAT=0
3361
3362 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
3363 # auto = mid on BAT, high on AC.
3364 # Default: default
3365 RADEON_POWER_PROFILE_ON_AC=default
3366 RADEON_POWER_PROFILE_ON_BAT=default
3367
3368 # Radeon dynamic power management method (DPM): battery, performance.
3369 # Default: <none>
3370 RADEON_DPM_STATE_ON_AC=performance
3371 RADEON_DPM_STATE_ON_BAT=battery
3372
3373 # Radeon DPM performance level: auto, low, high; auto is recommended.
3374 # Note: effective only when RADEON_DPM_STATE_ON_AC/BAT is activated.
3375 # Default: auto
3376 RADEON_DPM_PERF_LEVEL_ON_AC=auto
3377 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
3378
3379 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
3380 # Default: <none>
3381 WIFI_PWR_ON_AC=off
3382 WIFI_PWR_ON_BAT=on
3383
3384 # Disable wake on LAN: Y/N.
3385 # Default: N
3386 WOL_DISABLE=Y
3387
3388 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
3389 # A value of 0 disables, >=1 enables power saving (recommended: 1).
3390 # Default: <none>
3391 SOUND_POWER_SAVE_ON_AC=0
3392 SOUND_POWER_SAVE_ON_BAT=0
3393
3394 # Disable controller too (HDA only): Y/N.
3395 # Note: effective only when SOUND_POWER_SAVE_ON_AC/BAT is activated.
3396 # Default: Y
3397 SOUND_POWER_SAVE_CONTROLLER=N
3398
3399 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
3400 # Drive can be powered on again by releasing (and reinserting) the eject lever
3401 # or by pressing the disc eject button on newer models.
3402 # Note: an UltraBay/MediaBay hard disk is never powered off.
3403 # Default: 0
3404 BAY_POWEROFF_ON_AC=0
3405 BAY_POWEROFF_ON_BAT=0
3406 # Optical drive device to power off
3407 # Default: sr0
3408 BAY_DEVICE="sr0"
3409
3410 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
3411 # Default: <none>
3412 RUNTIME_PM_ON_AC=on
3413 RUNTIME_PM_ON_BAT=auto
3414
3415 # Exclude PCI(e) device adresses the following list from Runtime PM
3416 # (separate with spaces). Use lspci to get the adresses (1st column).
3417 # Default: <none>
3418 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
3419
3420 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
3421 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
3422 # prevents accidential power-on of dGPU in hybrid graphics setups.
3423 # Separate multiple drivers with spaces.
3424 # Default: "amdgpu mei_me nouveau nvidia pcieport radeon", use "" to disable
3425 # completely.
3426 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu mei_me nouveau nvidia pcieport radeon"
3427
3428 # Set to 0 to disable, 1 to enable USB autosuspend feature.
3429 # Default: 0
3430 USB_AUTOSUSPEND=1
3431
3432 # Exclude listed devices from USB autosuspend (separate with spaces).
3433 # Use lsusb to get the ids.
3434 # Note: input devices (usbhid) are excluded automatically
3435 # Default: <none>
3436 #USB_BLACKLIST="1111:2222 3333:4444"
3437
3438 # Bluetooth devices are excluded from USB autosuspend:
3439 # 0=do not exclude, 1=exclude.
3440 # Default: 0
3441 USB_BLACKLIST_BTUSB=0
3442
3443 # Phone devices are excluded from USB autosuspend:
3444 # 0=do not exclude, 1=exclude (enable charging).
3445 # Default: 0
3446 USB_BLACKLIST_PHONE=0
3447
3448 # Printers are excluded from USB autosuspend:
3449 # 0=do not exclude, 1=exclude.
3450 # Default: 1
3451 USB_BLACKLIST_PRINTER=1
3452
3453 # WWAN devices are excluded from USB autosuspend:
3454 # 0=do not exclude, 1=exclude.
3455 # Default: 0
3456 USB_BLACKLIST_WWAN=0
3457
3458 # Include listed devices into USB autosuspend even if already excluded
3459 # by the blacklists above (separate with spaces). Use lsusb to get the ids.
3460 # Default: <none>
3461 #USB_WHITELIST="1111:2222 3333:4444"
3462
3463 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
3464 # (workaround for USB devices that cause shutdown problems).
3465 # Default: 0
3466 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
3467
3468 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
3469 # on system startup: 0=disable, 1=enable.
3470 # Note: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
3471 # are ignored when this is enabled.
3472 # Default: 0
3473 #RESTORE_DEVICE_STATE_ON_STARTUP=0
3474 RESTORE_DEVICE_STATE_ON_STARTUP=1
3475
3476 # Radio devices to disable on startup: bluetooth, wifi, wwan.
3477 # Separate multiple devices with spaces.
3478 # Default: <none>
3479 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
3480
3481 # Radio devices to enable on startup: bluetooth, wifi, wwan.
3482 # Separate multiple devices with spaces.
3483 # Default: <none>
3484 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
3485
3486 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
3487 # (workaround for devices that are blocking shutdown).
3488 # Default: <none>
3489 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
3490
3491 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
3492 # (to prevent other operating systems from missing radios).
3493 # Default: <none>
3494 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
3495
3496 # Radio devices to enable on AC: bluetooth, wifi, wwan.
3497 # Default: <none>
3498 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
3499
3500 # Radio devices to disable on battery: bluetooth, wifi, wwan.
3501 # Default: <none>
3502 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
3503 DEVICES_TO_DISABLE_ON_BAT="bluetooth"
3504
3505 # Radio devices to disable on battery when not in use (not connected):
3506 # bluetooth, wifi, wwan.
3507 # Default: <none>
3508 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
3509
3510 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
3511 # required). Charging starts when the remaining capacity falls below the
3512 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
3513 # Main / Internal battery (values in %)
3514 # Default: <none>
3515 #START_CHARGE_THRESH_BAT0=75
3516 #STOP_CHARGE_THRESH_BAT0=80
3517 # Ultrabay / Slice / Replaceable battery (values in %)
3518 # Default: <none>
3519 #START_CHARGE_THRESH_BAT1=75
3520 #STOP_CHARGE_THRESH_BAT1=80
3521
3522 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
3523 # Default: 0
3524 #RESTORE_THRESHOLDS_ON_BAT=1
3525
3526 # Battery feature drivers: 0=disable, 1=enable
3527 # Default: 1 (all)
3528 NATACPI_ENABLE=1
3529 TPACPI_ENABLE=1
3530 TPSMAPI_ENABLE=1
3531
3532 # ------------------------------------------------------------------------------
3533 # tlp-rdw - Parameters for the radio device wizard
3534 # Possible devices: bluetooth, wifi, wwan.
3535
3536 # Notes:
3537 # - Parameters are disabled by default, remove the leading # to enable them
3538 # - Separate multiple radio devices with spaces
3539
3540 # Default: <none> (for all parameters below)
3541
3542 # Radio devices to disable on connect.
3543 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
3544 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
3545 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
3546
3547 # Radio devices to enable on disconnect.
3548 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
3549 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
3550 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
3551
3552 # Radio devices to enable/disable when docked.
3553 #DEVICES_TO_ENABLE_ON_DOCK=""
3554 #DEVICES_TO_DISABLE_ON_DOCK=""
3555
3556 # Radio devices to enable/disable when undocked.
3557 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
3558 #DEVICES_TO_DISABLE_ON_UNDOCK=""
3559 #+end_src
3560
3561 *** shemshak
3562
3563 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "shemshak")) "/sudo::/etc/default/tlp")
3564 # ------------------------------------------------------------------------------
3565 # tlp - Parameters for power saving
3566 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
3567
3568 # Hint: some features are disabled by default, remove the leading # to enable
3569 # them.
3570
3571 # Set to 0 to disable, 1 to enable TLP.
3572 TLP_ENABLE=1
3573
3574 # Operation mode when no power supply can be detected: AC, BAT.
3575 # Concerns some desktop and embedded hardware only.
3576 TLP_DEFAULT_MODE=AC
3577
3578 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
3579 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
3580 TLP_PERSISTENT_DEFAULT=0
3581
3582 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
3583 # Non-zero value enables, zero disables laptop mode.
3584 DISK_IDLE_SECS_ON_AC=0
3585 DISK_IDLE_SECS_ON_BAT=2
3586
3587 # Dirty page values (timeouts in secs).
3588 MAX_LOST_WORK_SECS_ON_AC=15
3589 MAX_LOST_WORK_SECS_ON_BAT=60
3590
3591 # Hint: CPU parameters below are disabled by default, remove the leading #
3592 # to enable them, otherwise kernel default values are used.
3593
3594 # Select a CPU frequency scaling governor.
3595 # Intel Core i processor with intel_pstate driver:
3596 # powersave(*), performance.
3597 # Older hardware with acpi-cpufreq driver:
3598 # ondemand(*), powersave, performance, conservative, schedutil.
3599 # (*) is recommended.
3600 # Hint: use tlp-stat -p to show the active driver and available governors.
3601 # Important:
3602 # powersave for intel_pstate and ondemand for acpi-cpufreq are power
3603 # efficient for *almost all* workloads and therefore kernel and most
3604 # distributions have chosen them as defaults. If you still want to change,
3605 # you should know what you're doing! You *must* disable your distribution's
3606 # governor settings or conflicts will occur.
3607 #CPU_SCALING_GOVERNOR_ON_AC=powersave
3608 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
3609
3610 # Set the min/max frequency available for the scaling governor.
3611 # Possible values strongly depend on your CPU. For available frequencies see
3612 # the output of tlp-stat -p.
3613 #CPU_SCALING_MIN_FREQ_ON_AC=0
3614 #CPU_SCALING_MAX_FREQ_ON_AC=0
3615 #CPU_SCALING_MIN_FREQ_ON_BAT=0
3616 #CPU_SCALING_MAX_FREQ_ON_BAT=0
3617
3618 # Set energy performance hints (HWP) for Intel P-state governor:
3619 # performance, balance_performance, default, balance_power, power
3620 # Values are given in order of increasing power saving.
3621 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
3622 CPU_HWP_ON_AC=balance_performance
3623 CPU_HWP_ON_BAT=balance_power
3624
3625 # Set Intel P-state performance: 0..100 (%).
3626 # Limit the max/min P-state to control the power dissipation of the CPU.
3627 # Values are stated as a percentage of the available performance.
3628 # Requires an Intel Core i processor with intel_pstate driver.
3629 #CPU_MIN_PERF_ON_AC=0
3630 #CPU_MAX_PERF_ON_AC=100
3631 #CPU_MIN_PERF_ON_BAT=0
3632 #CPU_MAX_PERF_ON_BAT=30
3633
3634 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
3635 # Requires an Intel Core i processor.
3636 # Important:
3637 # - This may conflict with your distribution's governor settings
3638 # - A value of 1 does *not* activate boosting, it just allows it
3639 #CPU_BOOST_ON_AC=1
3640 #CPU_BOOST_ON_BAT=0
3641
3642 # Minimize number of used CPU cores/hyper-threads under light load conditions:
3643 # 0=disable, 1=enable.
3644 SCHED_POWERSAVE_ON_AC=0
3645 SCHED_POWERSAVE_ON_BAT=1
3646
3647 # Kernel NMI Watchdog:
3648 # 0=disable (default, saves power), 1=enable (for kernel debugging only).
3649 NMI_WATCHDOG=0
3650
3651 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
3652 # Frequency voltage pairs are written to:
3653 # /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
3654 # CAUTION: only use this, if you thoroughly understand what you are doing!
3655 #PHC_CONTROLS="F:V F:V F:V F:V"
3656
3657 # Set CPU performance versus energy savings policy:
3658 # performance, balance-performance, default, balance-power, power.
3659 # Values are given in order of increasing power saving.
3660 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
3661 ENERGY_PERF_POLICY_ON_AC=performance
3662 ENERGY_PERF_POLICY_ON_BAT=balance-power
3663
3664 # Disk devices; separate multiple devices with spaces (default: sda).
3665 # Devices can be specified by disk ID also (lookup with: tlp diskid).
3666 DISK_DEVICES="sda sdb"
3667
3668 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
3669 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
3670 # Separate values for multiple disks with spaces. Use the special value 'keep'
3671 # to keep the hardware default for the particular disk.
3672 DISK_APM_LEVEL_ON_AC="254 254"
3673 DISK_APM_LEVEL_ON_BAT="128 128"
3674
3675 # Hard disk spin down timeout:
3676 # 0: spin down disabled
3677 # 1..240: timeouts from 5s to 20min (in units of 5s)
3678 # 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
3679 # See 'man hdparm' for details.
3680 # Separate values for multiple disks with spaces. Use the special value 'keep'
3681 # to keep the hardware default for the particular disk.
3682 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
3683 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
3684
3685 # Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
3686 # Separate values for multiple disks with spaces. Use the special value 'keep'
3687 # to keep the kernel default scheduler for the particular disk.
3688 #DISK_IOSCHED="cfq cfq"
3689
3690 # AHCI link power management (ALPM) for disk devices:
3691 # min_power, med_power_with_dipm(*), medium_power, max_performance.
3692 # (*) Kernel >= 4.15 required, then recommended.
3693 # Multiple values separated with spaces are tried sequentially until success.
3694 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
3695 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
3696
3697 # Exclude host devices from AHCI link power management.
3698 # Separate multiple hosts with spaces.
3699 #SATA_LINKPWR_BLACKLIST="host1"
3700
3701 # Runtime Power Management for AHCI host and disks devices:
3702 # on=disable, auto=enable.
3703 # EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
3704 #AHCI_RUNTIME_PM_ON_AC=on
3705 #AHCI_RUNTIME_PM_ON_BAT=on
3706
3707 # Seconds of inactivity before disk is suspended.
3708 AHCI_RUNTIME_PM_TIMEOUT=15
3709
3710 # PCI Express Active State Power Management (PCIe ASPM):
3711 # default, performance, powersave.
3712 PCIE_ASPM_ON_AC=performance
3713 PCIE_ASPM_ON_BAT=powersave
3714
3715 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
3716 # auto = mid on BAT, high on AC; default = use hardware defaults.
3717 RADEON_POWER_PROFILE_ON_AC=high
3718 RADEON_POWER_PROFILE_ON_BAT=low
3719
3720 # Radeon dynamic power management method (DPM): battery, performance.
3721 RADEON_DPM_STATE_ON_AC=performance
3722 RADEON_DPM_STATE_ON_BAT=battery
3723
3724 # Radeon DPM performance level: auto, low, high; auto is recommended.
3725 RADEON_DPM_PERF_LEVEL_ON_AC=auto
3726 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
3727
3728 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
3729 WIFI_PWR_ON_AC=off
3730 WIFI_PWR_ON_BAT=on
3731
3732 # Disable wake on LAN: Y/N.
3733 WOL_DISABLE=Y
3734
3735 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
3736 # A value of 0 disables, >=1 enables power saving (recommended: 1).
3737 SOUND_POWER_SAVE_ON_AC=0
3738 SOUND_POWER_SAVE_ON_BAT=0
3739
3740 # Disable controller too (HDA only): Y/N.
3741 SOUND_POWER_SAVE_CONTROLLER=N
3742
3743 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
3744 # Drive can be powered on again by releasing (and reinserting) the eject lever
3745 # or by pressing the disc eject button on newer models.
3746 # Note: an UltraBay/MediaBay hard disk is never powered off.
3747 BAY_POWEROFF_ON_AC=0
3748 BAY_POWEROFF_ON_BAT=0
3749 # Optical drive device to power off (default sr0).
3750 BAY_DEVICE="sr0"
3751
3752 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
3753 RUNTIME_PM_ON_AC=on
3754 RUNTIME_PM_ON_BAT=auto
3755
3756 # Exclude PCI(e) device adresses the following list from Runtime PM
3757 # (separate with spaces). Use lspci to get the adresses (1st column).
3758 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
3759 RUNTIME_PM_BLACKLIST="01:00.0"
3760
3761 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
3762 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
3763 # prevents accidential power-on of dGPU in hybrid graphics setups.
3764 # Use "" to disable the feature completely.
3765 # Separate multiple drivers with spaces.
3766 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
3767
3768 # Set to 0 to disable, 1 to enable USB autosuspend feature.
3769 USB_AUTOSUSPEND=1
3770
3771 # Exclude listed devices from USB autosuspend (separate with spaces).
3772 # Use lsusb to get the ids.
3773 # Note: input devices (usbhid) are excluded automatically
3774 #USB_BLACKLIST="1111:2222 3333:4444"
3775
3776 # Bluetooth devices are excluded from USB autosuspend:
3777 # 0=do not exclude, 1=exclude.
3778 USB_BLACKLIST_BTUSB=0
3779
3780 # Phone devices are excluded from USB autosuspend:
3781 # 0=do not exclude, 1=exclude (enable charging).
3782 USB_BLACKLIST_PHONE=0
3783
3784 # Printers are excluded from USB autosuspend:
3785 # 0=do not exclude, 1=exclude.
3786 USB_BLACKLIST_PRINTER=1
3787
3788 # WWAN devices are excluded from USB autosuspend:
3789 # 0=do not exclude, 1=exclude.
3790 USB_BLACKLIST_WWAN=1
3791
3792 # Include listed devices into USB autosuspend even if already excluded
3793 # by the blacklists above (separate with spaces).
3794 # Use lsusb to get the ids.
3795 #USB_WHITELIST="1111:2222 3333:4444"
3796
3797 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
3798 # (workaround for USB devices that cause shutdown problems).
3799 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
3800
3801 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
3802 # on system startup: 0=disable, 1=enable.
3803 # Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
3804 # are ignored when this is enabled!
3805 #RESTORE_DEVICE_STATE_ON_STARTUP=0
3806 RESTORE_DEVICE_STATE_ON_STARTUP=1
3807
3808 # Radio devices to disable on startup: bluetooth, wifi, wwan.
3809 # Separate multiple devices with spaces.
3810 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
3811
3812 # Radio devices to enable on startup: bluetooth, wifi, wwan.
3813 # Separate multiple devices with spaces.
3814 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
3815
3816 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
3817 # (workaround for devices that are blocking shutdown).
3818 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
3819
3820 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
3821 # (to prevent other operating systems from missing radios).
3822 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
3823
3824 # Radio devices to enable on AC: bluetooth, wifi, wwan.
3825 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
3826
3827 # Radio devices to disable on battery: bluetooth, wifi, wwan.
3828 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
3829
3830 # Radio devices to disable on battery when not in use (not connected):
3831 # bluetooth, wifi, wwan.
3832 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
3833
3834 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
3835 # required). Charging starts when the remaining capacity falls below the
3836 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
3837 # Main / Internal battery (values in %)
3838 #START_CHARGE_THRESH_BAT0=75
3839 #STOP_CHARGE_THRESH_BAT0=80
3840 # Ultrabay / Slice / Replaceable battery (values in %)
3841 #START_CHARGE_THRESH_BAT1=75
3842 #STOP_CHARGE_THRESH_BAT1=80
3843
3844 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
3845 #RESTORE_THRESHOLDS_ON_BAT=1
3846
3847 # ------------------------------------------------------------------------------
3848 # tlp-rdw - Parameters for the radio device wizard
3849 # Possible devices: bluetooth, wifi, wwan.
3850
3851 # Hints:
3852 # - Parameters are disabled by default, remove the leading # to enable them
3853 # - Separate multiple radio devices with spaces
3854
3855 # Radio devices to disable on connect.
3856 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
3857 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
3858 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
3859
3860 # Radio devices to enable on disconnect.
3861 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
3862 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
3863 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
3864
3865 # Radio devices to enable/disable when docked.
3866 #DEVICES_TO_ENABLE_ON_DOCK=""
3867 #DEVICES_TO_DISABLE_ON_DOCK=""
3868
3869 # Radio devices to enable/disable when undocked.
3870 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
3871 #DEVICES_TO_DISABLE_ON_UNDOCK=""
3872 #+end_src
3873
3874 ** X
3875
3876 *** xprofile
3877 :PROPERTIES:
3878 :header-args+: :tangle ~/.xprofile
3879 :END:
3880
3881 =~/.xprofile= is similar in style to =~/.xinitrc=, but on the
3882 contrary, it's automatically sourced by LightDM, my display manager of
3883 choice.
3884
3885 #+begin_src sh :tangle no
3886 xset -b # disable bell
3887 xset r rate 200 45 # repeat delay (ms) and rate (repeats/sec)
3888
3889 # setxkbmap -option compose:ralt
3890
3891 setxkbmap -option ctrl:nocaps # turn capslock into control
3892 setxkbmap -option altwin:swap_alt_win # swap alt and super
3893
3894 if [ $(hostname) = "plasma" ]
3895 then
3896 setxkbmap -option ctrl:rctrl_ralt # turn right control into right alt
3897 fi
3898
3899 if [ $(hostname) = "enigma" ]
3900 then
3901 xmodmap -e "keycode 135 = Alt_R" # remap menu key to alt
3902 fi
3903
3904 light -Scrs "intel_backlight" 2
3905
3906 source $HOME/.zprofile
3907
3908 export _JAVA_AWT_WM_NONREPARENTING=1
3909 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
3910
3911 if [ $(hostname) = "plasma" ]
3912 then
3913 unlock-def-gk.py &
3914 fi
3915
3916 bspwm &
3917 #+end_src
3918
3919 *** X resources
3920
3921 **** Xresources
3922 :PROPERTIES:
3923 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
3924 :END:
3925
3926 #+begin_src conf-xdefaults
3927 #include ".Xresources.d/fonts"
3928 ! #include ".Xresources.d/colors"
3929 #include ".Xresources.d/emacs"
3930 #include ".Xresources.d/rxvt-unicode"
3931 #+end_src
3932
3933 **** Xresources.d
3934
3935 ***** fonts
3936 :PROPERTIES:
3937 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
3938 :END:
3939
3940 #+begin_src conf-xdefaults
3941 Xft.lcdfilter: lcddefault
3942 Xft.antialias: true
3943 Xft.autohint: 0
3944 Xft.hinting: true
3945 Xft.hintstyle: hintslight
3946 ! Xft.hintstyle: hintfull
3947 Xft.rgba: rgb
3948 Xft.dpi: 96
3949 #+end_src
3950
3951 ***** colors
3952 :PROPERTIES:
3953 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
3954 :END:
3955
3956 #+begin_src conf-xdefaults :tangle no
3957 #include "gruvbox-light.xresources"
3958 ! #include "gruvbox-dark.xresources"
3959 #include "gruvbox-urxvt256.xresources"
3960 #+end_src
3961
3962 #+begin_src conf-xdefaults :tangle no
3963 ! -----------------------------------------------------------------------------
3964 ! File: gruvbox-light.xresources
3965 ! Description: Retro groove colorscheme generalized
3966 ! Author: morhetz <morhetz@gmail.com>
3967 ! Source: https://github.com/morhetz/gruvbox-generalized
3968 ! Last Modified: 6 Sep 2014
3969 ! -----------------------------------------------------------------------------
3970
3971 ! hard contrast: *background: #f9f5d7
3972 *background: #fbf1c7
3973 ! soft contrast: *background: #f2e5bc
3974 *foreground: #3c3836
3975 ! Black + DarkGrey
3976 *color0: #fdf4c1
3977 *color8: #928374
3978 ! DarkRed + Red
3979 *color1: #cc241d
3980 *color9: #9d0006
3981 ! DarkGreen + Green
3982 *color2: #98971a
3983 *color10: #79740e
3984 ! DarkYellow + Yellow
3985 *color3: #d79921
3986 *color11: #b57614
3987 ! DarkBlue + Blue
3988 *color4: #458588
3989 *color12: #076678
3990 ! DarkMagenta + Magenta
3991 *color5: #b16286
3992 *color13: #8f3f71
3993 ! DarkCyan + Cyan
3994 *color6: #689d6a
3995 *color14: #427b58
3996 ! LightGrey + White
3997 *color7: #7c6f64
3998 *color15: #3c3836
3999 #+end_src
4000
4001 #+begin_src conf-xdefaults :tangle no
4002 ! -----------------------------------------------------------------------------
4003 ! File: gruvbox-dark.xresources
4004 ! Description: Retro groove colorscheme generalized
4005 ! Author: morhetz <morhetz@gmail.com>
4006 ! Source: https://github.com/morhetz/gruvbox-generalized
4007 ! Last Modified: 6 Sep 2014
4008 ! -----------------------------------------------------------------------------
4009
4010 ! hard contrast: *background: #1d2021
4011 *background: #282828
4012 ! soft contrast: *background: #32302f
4013 *foreground: #ebdbb2
4014 ! Black + DarkGrey
4015 *color0: #282828
4016 *color8: #928374
4017 ! DarkRed + Red
4018 *color1: #cc241d
4019 *color9: #fb4934
4020 ! DarkGreen + Green
4021 *color2: #98971a
4022 *color10: #b8bb26
4023 ! DarkYellow + Yellow
4024 *color3: #d79921
4025 *color11: #fabd2f
4026 ! DarkBlue + Blue
4027 *color4: #458588
4028 *color12: #83a598
4029 ! DarkMagenta + Magenta
4030 *color5: #b16286
4031 *color13: #d3869b
4032 ! DarkCyan + Cyan
4033 *color6: #689d6a
4034 *color14: #8ec07c
4035 ! LightGrey + White
4036 *color7: #a89984
4037 *color15: #ebdbb2
4038 #+end_src
4039
4040 #+begin_src conf-xdefaults :tangle no
4041 ! -----------------------------------------------------------------------------
4042 ! File: gruvbox-urxvt256.xresources
4043 ! Description: Retro groove colorscheme generalized
4044 ! Author: morhetz <morhetz@gmail.com>
4045 ! Source: https://github.com/morhetz/gruvbox-generalized
4046 ! Last Modified: 13 Dec 2013
4047 ! -----------------------------------------------------------------------------
4048
4049 URxvt.color24: #076678
4050 URxvt.color66: #427b58
4051 URxvt.color88: #9d0006
4052 URxvt.color96: #8f3f71
4053 URxvt.color100: #79740e
4054 URxvt.color108: #8ec07c
4055 URxvt.color109: #83a598
4056 URxvt.color130: #af3a03
4057 URxvt.color136: #b57614
4058 URxvt.color142: #b8bb26
4059 URxvt.color167: #fb4934
4060 URxvt.color175: #d3869b
4061 URxvt.color208: #fe8019
4062 URxvt.color214: #fabd2f
4063 URxvt.color223: #ebdbb2
4064 URxvt.color228: #f2e5bc
4065 URxvt.color229: #fbf1c7
4066 URxvt.color230: #f9f5d7
4067 URxvt.color234: #1d2021
4068 URxvt.color235: #282828
4069 URxvt.color236: #32302f
4070 URxvt.color237: #3c3836
4071 URxvt.color239: #504945
4072 URxvt.color241: #665c54
4073 URxvt.color243: #7c6f64
4074 URxvt.color244: #928374
4075 URxvt.color245: #928374
4076 URxvt.color246: #a89984
4077 URxvt.color248: #bdae93
4078 URxvt.color250: #d5c4a1
4079 #+end_src
4080
4081 ***** emacs
4082 :PROPERTIES:
4083 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
4084 :END:
4085
4086 #+begin_src conf-xdefaults
4087 Emacs.menuBar: off
4088 Emacs.toolBar: off
4089 Emacs.verticalScrollBars: off
4090 Emacs.cursorBlink: off
4091 Emacs.FontBackend: xft,x
4092 ! Emacs.font: Ubuntu Mono-12
4093 ! Emacs.font: Triplicate T4C-11
4094 ! Emacs.font: Ubuntu Mono-10.5
4095 ! Emacs.font: Ubuntu Mono-12
4096 ! Emacs.font: Iosevka-11
4097
4098 ! Emacs.font: Fira Mono:size=15
4099 ! Emacs.font: DejaVu Sans Mono:size=15
4100 ! Emacs.font: Inconsolata:size=17
4101 ! Emacs.font: Inconsolata:size=16
4102 ! Emacs.font: Inconsolata LGC:size=14
4103 ! Emacs.font: Source Code Pro Medium-10.5
4104 Emacs.font: Source Code Pro:size=14
4105 ! Emacs.font: Ubuntu Mono:size=16
4106 ! Emacs.font: Iosevka:size=16
4107 #+end_src
4108
4109 ***** rxvt-unicode
4110 :PROPERTIES:
4111 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
4112 :END:
4113
4114 #+begin_src conf-xdefaults
4115 ! Font
4116 URxvt.font: xft:source code pro:pixelsize=14:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
4117 URxvt.boldFont: xft:source code pro:semibold:pixelsize=14:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
4118 URxvt.italicFont: xft:source code pro:italic:pixelsize=14:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
4119 URxvt.bolditalicFont: xft:source code pro:semibold:italic:pixelsize=14:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
4120
4121 URxvt.xftAntialias: true
4122 URxvt.letterSpace: 0
4123
4124 URxvt.depth: 0
4125 URxvt.loginShell: true
4126 URxvt.saveLines: 100000
4127 URxvt.internalBorder: 3
4128 URxvt.lineSpace: 0
4129 URxvt.scrollBar: false
4130 URxvt.scrollStyle: rxvt
4131 URxvt*scrollTtyOutput: false
4132 URxvt*scrollWithBuffer: true
4133 URxvt*scrollTtyKeypress: true
4134 URxvt.keysym.Shift-Up: command:\033]720;1\007
4135 URxvt.keysym.Shift-Down: command:\033]721;1\007
4136
4137 URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select
4138 URxvt.url-select.launcher: firefox
4139 URxvt.url-select.underline: true
4140 URxvt.keysym.M-u: perl:url-select:select_next
4141 URxvt.keysym.M-Escape: perl:keyboard-select:activate
4142 URxvt.keysym.M-s: perl:keyboard-select:search
4143 URxvt.url-launcher: /usr/bin/firefox
4144 URxvt.matcher.button: 1
4145 URxvt.iso14755: false
4146 URxvt.iso14755_53: false
4147 URxvt.keysym.M-c: perl:clipboard:copy
4148 URxvt.keysym.M-v: perl:clipboard:paste
4149 URxvt.keysym.C-A-V: perl:clipboard:paste_escaped
4150 URxvt.keysym.C-Up: font-size:increase
4151 URxvt.keysym.C-Down: font-size:decrease
4152 URxvt.keysym.C-S-Up: font-size:incglobal
4153 URxvt.keysym.C-S-Down: font-size:decglobal
4154 URxvt.keysym.C-equal: font-size:reset
4155 !URxvt.keysym.C-question: font-size:show
4156
4157 URxvt.iconFile: /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
4158
4159 !urxvt*foreground: white
4160 !urxvt*background: black
4161
4162 !*color0: #2E3436
4163 !*color1: #a40000
4164 !*color2: #4E9A06
4165 !*color3: #C4A000
4166 !*color4: #3465A4
4167 !*color5: #75507B
4168 !*color6: #ce5c00
4169 !*color7: #babdb9
4170 !*color8: #555753
4171 !*color9: #EF2929
4172 !*color10: #8AE234
4173 !*color11: #FCE94F
4174 !*color12: #729FCF
4175 !*color13: #AD7FA8
4176 !*color14: #fcaf3e
4177 !*color15: #EEEEEC
4178
4179 !URxvt.foreground: #C8C8C8
4180 !URxvt.background: #FFFFFF
4181
4182 !! black
4183 !*color0: #2E3436
4184 !*color8: #555753
4185 !! red
4186 !*color1: #a40000
4187 !*color9: #EF2929
4188 !! green
4189 !*color2: #4E9A06
4190 !*color10: #8AE234
4191 !! yellow
4192 !*color3: #C4A000
4193 !*color11: #FCE94F
4194 !! blue
4195 !*color4: #3465A4
4196 !*color12: #729FCF
4197 !! purple
4198 !*color5: #75507B
4199 !*color13: #AD7FA8
4200 !! orange (replaces cyan)
4201 !*color6: #ce5c00
4202 !*color14: #fcaf3e
4203 !! white
4204 !*color7: #babdb9
4205 !*color15: #EEEEEC
4206
4207 ! Tango colour theme for rxvt-unicode
4208 URxvt.background: #FFFFFF
4209 URxvt.foreground: #000000
4210
4211 ! Black
4212 URxvt.color0: #2E3436
4213 URxvt.color8: #757773
4214
4215 ! Red
4216 URxvt.color1: #CC0000
4217 URxvt.color9: #EF2929
4218
4219 ! Green
4220 URxvt.color2: #4E9A06
4221 URxvt.color10: #8AE234
4222
4223 ! Yellow
4224 URxvt.color3: #C4A000
4225 URxvt.color11: #FCE94F
4226
4227 ! Blue
4228 URxvt.color4: #3465A4
4229 URxvt.color12: #729FCF
4230
4231 ! Magenta
4232 URxvt.color5: #75507B
4233 URxvt.color13: #AD7FA8
4234
4235 !! Cyan
4236 !URxvt.color6: #06989A
4237 !URxvt.color14: #34E2E2
4238 ! orange (replaces cyan)
4239 ,*color6: #ce5c00
4240 ,*color14: #fcaf3e
4241
4242 ! White
4243 URxvt.color7: #D3D7CF
4244 URxvt.color15: #EEEEEC
4245 #+end_src
4246
4247 *** xkb us_ab keyboard layout
4248
4249 #+begin_src conf :tangle "/sudo::/usr/share/X11/xkb/symbols/us_ab" :comments none
4250 default partial alphanumeric_keys
4251 xkb_symbols "us_ab" {
4252 include "us(basic)"
4253 name[Group1]= "English (US)(aminb)";
4254
4255 key <MENU> { [ Alt_R ] };
4256 };
4257 #+end_src
4258
4259 ** XDG
4260 :PROPERTIES:
4261 :header-args+: :tangle ~/.config/user-dirs.dirs
4262 :END:
4263
4264 #+begin_src conf
4265 XDG_DESKTOP_DIR="$HOME/Desktop"
4266 XDG_DOCUMENTS_DIR="$HOME/usr/docs"
4267 XDG_DOWNLOAD_DIR="$HOME/usr/dls"
4268 XDG_MUSIC_DIR="$HOME/usr/music"
4269 XDG_PICTURES_DIR="$HOME/usr/pics"
4270 XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
4271 XDG_TEMPLATES_DIR="$HOME/usr/Templates"
4272 XDG_VIDEOS_DIR="$HOME/usr/vids"
4273 #+end_src
4274
4275 ** Zathura
4276 :PROPERTIES:
4277 :header-args+: :tangle ~/.config/zathura/zathurarc
4278 :END:
4279
4280 #+begin_src conf
4281 set smooth-scroll true
4282 set selection-clipboard clipboard
4283 set zoom-step 05
4284 set default-bg "#272727"
4285 set statusbar-bg "#272727"
4286 set inputbar-bg "#373737"
4287 #+end_src
4288
4289 ** Zsh
4290
4291 My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
4292 [[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
4293 installed.
4294
4295 *** zimrc
4296 :PROPERTIES:
4297 :header-args+: :tangle ~/.zimrc
4298 :END:
4299
4300 #+begin_src sh
4301 #################
4302 # CORE SETTINGS #
4303 #################
4304
4305 #
4306 # Zim settings
4307 #
4308
4309 # Select what modules you would like enabled.
4310 # The second line of modules may depend on options set by modules in the first
4311 # line. These dependencies are noted on the respective module's README.md.
4312 zmodules=(directory environment git git-info history input ssh utility custom \
4313 syntax-highlighting history-substring-search prompt completion)
4314
4315
4316 ###################
4317 # MODULE SETTINGS #
4318 ###################
4319
4320 #
4321 # Prompt
4322 #
4323
4324 # Set your desired prompt here
4325 zprompt_theme='pure'
4326 #PURE_PROMPT_SYMBOL=λ
4327 #PURE_PROMPT_SYMBOL=δ
4328 PURE_PROMPT_SYMBOL=➜
4329
4330 #
4331 # Completion
4332 #
4333
4334 # set an optional host-specific filename for the completion cache file
4335 # if none is provided, the default '.zcompdump' is used.
4336 #zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
4337
4338 #
4339 # Utility
4340 #
4341
4342 # Uncomment to enable command correction prompts
4343 # See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
4344 setopt CORRECT
4345
4346 #
4347 # Environment
4348 #
4349
4350 # Set the string below to the desired terminal title format string.
4351 # The terminal title is redrawn upon directory change, however, variables like
4352 # ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
4353 # http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
4354 # The example below uses the following format: 'username@host:/current/directory'
4355 ztermtitle='%n@%m:%~'
4356
4357 #
4358 # Input
4359 #
4360
4361 # Uncomment to enable double-dot expansion.
4362 # This appends '../' to your input for each '.' you type after an initial '..'
4363 #zdouble_dot_expand='true'
4364
4365 #
4366 # Syntax-Highlighting
4367 #
4368
4369 # This determines what highlighters will be used with the syntax-highlighting module.
4370 # Documentation of the highlighters can be found here:
4371 # https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
4372 # For (u)rxvt, termite and gnome-terminal users,
4373 # removing the 'cursor' highlighter will fix the disappearing cursor problem
4374 #zhighlighters=(main brackets cursor)
4375 zhighlighters=(main brackets pattern)
4376
4377 #
4378 # SSH
4379 #
4380
4381 # Load these ssh identities with the ssh module
4382 zssh_ids=(id_ed25519_bandali)
4383
4384 #
4385 # Pacman
4386 #
4387
4388 # Set (optional) pacman front-end.
4389 zpacman_frontend='yay'
4390
4391 # Load any helper scripts as defined here
4392 #zpacman_helper=(aur)
4393
4394
4395 #+end_src
4396
4397 *** zlogin
4398 :PROPERTIES:
4399 :header-args+: :tangle ~/.zlogin
4400 :END:
4401
4402 #+begin_src sh
4403 #
4404 # User configuration sourced by login shells
4405 #
4406
4407 # Initialize zim
4408 [[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
4409
4410 #+end_src
4411
4412 *** zprofile
4413 :PROPERTIES:
4414 :header-args+: :tangle ~/.zprofile
4415 :END:
4416
4417 #+begin_src sh
4418 #PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
4419 #PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
4420 export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
4421 export XDG_CONFIG_HOME=$HOME/.config
4422 export XDG_DATA_HOME=$HOME/.local/share
4423 export XDG_DATA_DIRS=/usr/local/share:/usr/share
4424 export MAILDIR="$HOME/mail"
4425 export CVS_RSH=ssh
4426 #export MATHMODELS=$HOME/src/eiffel/mathmodels
4427 #export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
4428 #export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
4429
4430 # Eiffel2Java stuff
4431 #export JAVA_HOME=/usr/lib/jvm/default
4432 #export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
4433 #export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4434 #export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4435
4436 #export PATH="$HOME/usr/build/pvs:$PATH"
4437 #export SBCLISP_HOME=/usr/share/sbcl-source
4438 #export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
4439
4440 export MOZ_USE_XINPUT2=1 # precise scrolling in firefox
4441
4442 #export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
4443 #export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
4444
4445 export NIXPKGS=$HOME/src/git/nixpkgs
4446
4447 if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
4448
4449 export GUIX_LOCPATH="$HOME/.guix-profile/lib/locale"
4450 export PATH="/$HOME/.config/guix/current/bin${PATH:+:}$PATH"
4451 export SSL_CERT_DIR="$HOME/.guix-profile/etc/ssl/certs"
4452 export SSL_CERT_FILE="$HOME/.guix-profile/etc/ssl/certs/ca-certificates.crt"
4453 export GIT_SSL_CAINFO="$SSL_CERT_FILE"
4454 #+end_src
4455
4456 *** zshenv
4457 :PROPERTIES:
4458 :header-args+: :tangle ~/.zshenv
4459 :END:
4460
4461 #+begin_src sh
4462 # Ensure that a non-login, non-interactive shell has a defined environment.
4463 if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
4464 source "${ZDOTDIR:-$HOME}/.zprofile"
4465 fi
4466 #+end_src
4467
4468 *** zshrc
4469 :PROPERTIES:
4470 :header-args+: :tangle ~/.zshrc
4471 :END:
4472
4473 #+begin_src sh
4474 # Bash-like navigation
4475 #export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
4476 #export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
4477 export WORDCHARS='*?[]~=&;!#$%^(){}<>'
4478 #ZLE_SPACE_SUFFIX_CHARS=$'|&'
4479
4480 #disable -r time # disable shell reserved word
4481 #alias time='time -p' # -p for POSIX output
4482
4483 # rehash if last command was pacaur or pacman
4484 # (so that zsh picks up changes in $PATH immediately)
4485 TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
4486
4487 #
4488 # User configuration sourced by interactive shells
4489 #
4490
4491 # Define zim location
4492 export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
4493
4494 # Start zim
4495 [[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
4496
4497 ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
4498 #ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
4499
4500 setopt globdots
4501
4502 source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
4503 # source ~/.zsh/zsh-autopair/autopair.zsh
4504
4505
4506 ### fzf ###
4507
4508 source /usr/share/fzf/key-bindings.zsh
4509 source /usr/share/fzf/completion.zsh
4510
4511 # Accept history selection instead of putting it on
4512 # the command line
4513 fzf-history-widget-accept() {
4514 fzf-history-widget
4515 zle accept-line
4516 }
4517 #zle -N fzf-history-widget-accept
4518 #bindkey '^R' fzf-history-widget-accept
4519
4520 # alt+c preview
4521 export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
4522
4523 ### fzf ###
4524
4525
4526 # aliases
4527 alias mpv="mpv --ytdl-format mp4"
4528 alias mv="mv -iv"
4529 alias cp="cp -iv"
4530 alias scl=systemctl
4531 alias jcl=journalctl
4532 alias m="mbsync csclub; mbsync uwaterloo; mbsync amin"
4533 alias best="youtube-dl -f best"
4534 alias sd="ssh deb"
4535 alias sf="ssh fp"
4536 alias sn="ssh nix"
4537
4538 aur() {
4539 cd ~/usr/build
4540 git clone https://aur.archlinux.org/${1}.git
4541 cd ${1}
4542 }
4543
4544 # i-beam cursor
4545 echo -e "\033[5 q"
4546 #echo -e "\033[6 q"
4547
4548 #+end_src
4549
4550 * Scripts
4551
4552 This section contains various useful scripts and the ones used by the
4553 programs above. For instance, =toggle-tablet= for switching to and
4554 from tablet mode on my X220T, =toggle-presentation-mode= for toggling
4555 Xfce's presentation mode which keeps the screen awake, and
4556 =rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
4557 exact brightness value.
4558
4559 ** battery-percentage-time
4560 :PROPERTIES:
4561 :header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/sh"
4562 :END:
4563
4564 #+begin_src sh :tangle no
4565 dbus_send() {
4566 label=$1
4567 dbus-send --print-reply=literal --system \
4568 --dest=org.freedesktop.UPower \
4569 /org/freedesktop/UPower/devices/battery_BAT0 \
4570 org.freedesktop.DBus.Properties.Get \
4571 string:org.freedesktop.UPower.Device \
4572 string:"${label}" | awk '{print $3}'
4573 }
4574
4575 perc=$(dbus_send 'Percentage')
4576 state=$(dbus_send 'State')
4577
4578 if [ "$state" -eq 2 ]; then # Discharging
4579 secs=$(dbus_send 'TimeToEmpty')
4580 elif [ "$state" -eq 1 ]; then # Charging
4581 secs=$(dbus_send 'TimeToFull')
4582 fi
4583
4584 printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60))
4585 #+end_src
4586
4587 ** my-i3status.py
4588 :PROPERTIES:
4589 :header-args+: :tangle ~/.local/bin/my-i3status.py :shebang "#!/usr/bin/env python2"
4590 :END:
4591
4592 #+begin_src python :comments none
4593 # -*- coding: utf-8 -*-
4594
4595 # This script is a simple wrapper which prefixes each i3status line with custom
4596 # information. It is based on:
4597 # https://github.com/i3/i3status/blob/master/contrib/wrapper.py
4598 #
4599 # In ~/.i3status.conf, add the following line:
4600 # output_format = "i3bar"
4601 # in the 'general' section.
4602 # Then, in ~/.config/i3/config or ~/.config/sway/config add:
4603 # status_command i3status | my-i3status.py
4604 # in the 'bar' section. Make sure my-i3status.py is in $PATH.
4605 #
4606 # © 2012 Valentin Haenel <valentin.haenel@gmx.de>
4607 # © 2018 Amin Bandali <bandali@gnu.org>
4608 #
4609 # This program is free software. It comes without any warranty, to the extent
4610 # permitted by applicable law. You can redistribute it and/or modify it under
4611 # the terms of the Do What The Fuck You Want To Public License (WTFPL), Version
4612 # 2, as published by Sam Hocevar. See http://sam.zoy.org/wtfpl/COPYING for more
4613 # details.
4614
4615 import sys
4616 import json
4617 import os
4618
4619 def get_nosleep():
4620 """ Return true if ~/.nosleep exists. """
4621 return os.path.isfile(os.path.expanduser("~/.nosleep"))
4622
4623 def print_line(message):
4624 """ Non-buffered printing to stdout. """
4625 sys.stdout.write(message + '\n')
4626 sys.stdout.flush()
4627
4628 def read_line():
4629 """ Interrupted respecting reader for stdin. """
4630 # try reading a line, removing any extra whitespace
4631 try:
4632 line = sys.stdin.readline().strip()
4633 # i3status sends EOF, or an empty line
4634 if not line:
4635 sys.exit(3)
4636 return line
4637 # exit on ctrl-c
4638 except KeyboardInterrupt:
4639 sys.exit()
4640
4641 if __name__ == '__main__':
4642 # Skip the first line which contains the version header.
4643 print_line(read_line())
4644
4645 # The second line contains the start of the infinite array.
4646 print_line(read_line())
4647
4648 while True:
4649 line, prefix = read_line(), ''
4650 # ignore comma at start of lines
4651 if line.startswith(','):
4652 line, prefix = line[1:], ','
4653
4654 if get_nosleep():
4655 j = json.loads(line)
4656 # insert information into the start of the json, but could be anywhere
4657 j.insert(0, {'full_text' : '•', 'name' : 'nosleep'})
4658 # and echo back new encoded json
4659 print_line(prefix+json.dumps(j))
4660 else:
4661 print_line(prefix+line)
4662 #+end_src
4663
4664 ** rofi-light
4665 :PROPERTIES:
4666 :header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
4667 :END:
4668
4669 #+begin_src bash
4670 cur=$(light -G)
4671 val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 12)
4672 [ -n "$val" ] && light -S $val
4673 #+end_src
4674
4675 ** rofi-remmina.py
4676 :PROPERTIES:
4677 :header-args+: :tangle ~/.local/bin/rofi-remmina.py :shebang "#!/usr/bin/env python2"
4678 :END:
4679
4680 #+begin_src python
4681 import ConfigParser
4682 import os
4683 from subprocess import Popen, PIPE
4684
4685 remmina_dir = os.path.expanduser("~/.local/share/remmina")
4686
4687 fdict = dict()
4688
4689 for f in os.listdir(remmina_dir):
4690 fp = os.path.join(remmina_dir, f)
4691 c = ConfigParser.ConfigParser()
4692 c.read(fp)
4693 n = c.get('remmina', 'name')
4694 fdict[n] = fp
4695
4696 lines = max(min(15, len(fdict)), 1);
4697 width = len(max(fdict.keys(), key=len))
4698 rofi = Popen(["rofi", "-i", "-dmenu", \
4699 "-l", str(lines), "-width", str(width), \
4700 "-p", "connection"], stdout=PIPE, stdin=PIPE)
4701 selected = rofi.communicate("\n" \
4702 .join(fdict.keys()) \
4703 .encode("utf-8"))[0] \
4704 .decode("utf-8") \
4705 .strip()
4706 rofi.wait()
4707
4708 r = Popen(["remmina", "-c", fdict[selected]])
4709 r.wait()
4710 #+end_src
4711
4712 ** s (run sway)
4713 :PROPERTIES:
4714 :header-args+: :tangle ~/.local/bin/s :shebang "#!/bin/bash"
4715 :END:
4716
4717 #+begin_src bash
4718 export _JAVA_AWT_WM_NONREPARENTING=1
4719 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4720 light -Nr 2
4721 source $HOME/.zprofile
4722 sway
4723 #+end_src
4724
4725 ** sway-ws-util
4726 :PROPERTIES:
4727 :header-args+: :tangle ~/.local/bin/sway-ws-util :shebang "#!/bin/bash"
4728 :END:
4729
4730 #+begin_src bash
4731 curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name')
4732 [[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1))
4733 [[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1))
4734 dest_ws=-1
4735 op=-1
4736
4737 if [ "$1" = "switch" ] || [ "$1" = "move" ]; then
4738 op="$1"
4739 if [ "$2" = "prev" ]; then
4740 dest_ws="$prev_ws"
4741 elif [ "$2" = "next" ]; then
4742 dest_ws="$next_ws"
4743 else
4744 echo "Usage: $0 $1 {prev|next} [follow]"
4745 exit 1
4746 fi
4747 else
4748 echo "Usage: $0 {switch|move} {prev|next} [follow]"
4749 exit 1
4750 fi
4751
4752 if [ "$op" = "switch" ]; then
4753 sway workspace "$dest_ws"
4754 elif [ "$op" = "move" ]; then
4755 sway move container to workspace "$dest_ws"
4756 if [ "$3" = "follow" ]; then
4757 sway workspace "$dest_ws"
4758 fi
4759 fi
4760 #+end_src
4761
4762 ** toggle-layout
4763 :PROPERTIES:
4764 :header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
4765 :END:
4766
4767 #+begin_src bash :tangle no
4768 lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
4769
4770 if [ "$lang" = "us" ]; then
4771 setxkbmap ir
4772 else
4773 setxkbmap us
4774 # xmodmap $HOME/.Xmodmap
4775 fi
4776 #+end_src
4777
4778 ** toggle-presentation-mode
4779 :PROPERTIES:
4780 :header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
4781 :END:
4782
4783 #+begin_src bash :tangle no
4784 xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
4785 #+end_src
4786
4787 ** toggle-tablet
4788 :PROPERTIES:
4789 :header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
4790 :END:
4791
4792 This script toggles between a 'normal' mode and a 'tablet' mode, doing
4793 a few things:
4794
4795 - rotates the screen using =xrandr=, so that rotating the physical
4796 display of my X220t would have the laptop's battery on the right
4797 hand side,
4798 - enables touch screen,
4799 - properly rotates the stylus pen and touch screen pointers, and
4800 - toggles between RGB and Vertical BGR sub-pixel order.
4801
4802 #+begin_src bash :tangle no
4803 case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
4804 0) # Screen is not rotated, we should rotate it right (90°)
4805 xrandr -o 3
4806 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
4807 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
4808 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
4809 xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
4810 ;;
4811 1) # Currently top is rotated right, we should set it normal (0°)
4812 xrandr -o 0
4813 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
4814 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
4815 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
4816 xfconf-query -c xsettings -p /Xft/RGBA -s rgb
4817 ;;
4818 *)
4819 echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
4820 exit 1
4821 ;;
4822 esac
4823 #+end_src
4824
4825 ** unlock-def-gk.py
4826 :PROPERTIES:
4827 :header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
4828 :END:
4829
4830 #+begin_src python :tangle no
4831 import gnomekeyring as gk
4832 # list_item_ids_sync('login')[0] == 1L
4833 gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
4834 #+end_src
4835
4836 ** volume-info
4837 :PROPERTIES:
4838 :header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh"
4839 :END:
4840
4841 #+begin_src sh :tangle no
4842 cur_vol=$(pamixer --get-volume)
4843
4844 if [ $(pamixer --get-mute) = true ]; then
4845 printf 'mt \n' "$cur_vol"
4846 else
4847 printf '%02d \n' "$cur_vol"
4848 fi
4849 #+end_src
4850
4851 ** wp
4852
4853 My little wallpaper changer script.
4854
4855 *** wp
4856 :PROPERTIES:
4857 :header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
4858 :END:
4859
4860 #+begin_src bash :tangle no
4861 export DISPLAY=:0
4862
4863 case "$1" in
4864 "day")
4865 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
4866 ;;
4867 "night")
4868 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
4869 ;;
4870 *)
4871 echo $"Usage: $0 {day|night}"
4872 exit 1
4873 esac
4874 #+end_src
4875
4876 *** wp-auto
4877 :PROPERTIES:
4878 :header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
4879 :END:
4880
4881 #+begin_src bash :tangle no
4882 SED=$(which sed)
4883 ROFI=$(which rofi)
4884
4885 export DISPLAY=:0
4886 HOUR=$(date +%H)
4887
4888 if [ -z "${SED}" ]
4889 then
4890 echo "Did not find 'sed', script cannot continue."
4891 exit 1
4892 fi
4893 if [ -z "${ROFI}" ]
4894 then
4895 echo "Did not find rofi, there is no point to continue."
4896 exit 1
4897 fi
4898
4899 ###
4900 # Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
4901 # Repeated calls should leave the config clean-ish
4902 ###
4903 function set_theme()
4904 {
4905 CDIR="${HOME}/.config/rofi/"
4906 if [ ! -d "${CDIR}" ]
4907 then
4908 mkdir -p ${CDIR}
4909 fi
4910 if [ -f "${CDIR}/config" ]
4911 then
4912 ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
4913 fi
4914 echo "rofi.theme: ${1}" >> "${CDIR}/config"
4915
4916 }
4917
4918 if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
4919 then
4920 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
4921 xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
4922 set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
4923 else
4924 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
4925 xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
4926 set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
4927 fi
4928 #+end_src
4929
4930 *** wp.service
4931 :PROPERTIES:
4932 :header-args+: :tangle ~/.config/systemd/user/wp.service
4933 :END:
4934
4935 #+begin_src conf :tangle no
4936 [Unit]
4937 Description=wallpaper service
4938
4939 [Service]
4940 Type=oneshot
4941 ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
4942 #+end_src
4943
4944 *** wp.timer
4945 :PROPERTIES:
4946 :header-args+: :tangle ~/.config/systemd/user/wp.timer
4947 :END:
4948
4949 #+begin_src conf :tangle no
4950 [Unit]
4951 [Unit]
4952 Description=wallpaper timer
4953
4954 [Timer]
4955 OnCalendar=07,21:00
4956 Unit=wp.service
4957 Persistent=true
4958
4959 [Install]
4960 WantedBy=timers.target
4961 #+end_src
4962
4963 ** zathura-sync.sh
4964 :PROPERTIES:
4965 :header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
4966 :END:
4967
4968 #+begin_src sh
4969 pos="$1"
4970 pdffile="$2"
4971 zathura --synctex-forward "$pos" "$pdffile" || \
4972 (
4973 zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
4974 sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
4975 #+end_src
4976 ** Fun :)
4977
4978 *** eat-em
4979 :PROPERTIES:
4980 :header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
4981 :END:
4982
4983 #+begin_src sh
4984 # Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
4985 # [ESC] character in original post removed here.
4986
4987 # ANSI Color -- use these variables to easily have different color
4988 # and format output. Make sure to output the reset sequence after
4989 # colors (f = foreground, b = background), and use the 'off'
4990 # feature for anything you turn on.
4991
4992 initializeANSI()
4993 {
4994 esc="$(echo -en '\e')"
4995
4996 blackf="${esc}[30m"; redf="${esc}[31m"; greenf="${esc}[32m"
4997 yellowf="${esc}[33m" bluef="${esc}[34m"; purplef="${esc}[35m"
4998 cyanf="${esc}[36m"; whitef="${esc}[37m"
4999
5000 blackb="${esc}[40m"; redb="${esc}[41m"; greenb="${esc}[42m"
5001 yellowb="${esc}[43m" blueb="${esc}[44m"; purpleb="${esc}[45m"
5002 cyanb="${esc}[46m"; whiteb="${esc}[47m"
5003
5004 boldon="${esc}[1m"; boldoff="${esc}[22m"
5005 italicson="${esc}[3m"; italicsoff="${esc}[23m"
5006 ulon="${esc}[4m"; uloff="${esc}[24m"
5007 invon="${esc}[7m"; invoff="${esc}[27m"
5008
5009 reset="${esc}[0m"
5010 }
5011
5012 # note in this first use that switching colors doesn't require a reset
5013 # first - the new color overrides the old one.
5014
5015 #clear
5016
5017 initializeANSI
5018
5019 cat << EOF
5020
5021 ${yellowf} ▄███████▄${reset} ${redf} ▄██████▄${reset} ${greenf} ▄██████▄${reset} ${bluef} ▄██████▄${reset} ${purplef} ▄██████▄${reset} ${cyanf} ▄██████▄${reset}
5022 ${yellowf}▄█████████▀▀${reset} ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset} ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset} ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset} ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset} ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5023 ${yellowf}███████▀${reset} ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset} ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset} ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset} ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset} ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5024 ${yellowf}███████▄${reset} ${redf}████████████${reset} ${greenf}████████████${reset} ${bluef}████████████${reset} ${purplef}████████████${reset} ${cyanf}████████████${reset}
5025 ${yellowf}▀█████████▄▄${reset} ${redf}██▀██▀▀██▀██${reset} ${greenf}██▀██▀▀██▀██${reset} ${bluef}██▀██▀▀██▀██${reset} ${purplef}██▀██▀▀██▀██${reset} ${cyanf}██▀██▀▀██▀██${reset}
5026 ${yellowf} ▀███████▀${reset} ${redf}▀ ▀ ▀ ▀${reset} ${greenf}▀ ▀ ▀ ▀${reset} ${bluef}▀ ▀ ▀ ▀${reset} ${purplef}▀ ▀ ▀ ▀${reset} ${cyanf}▀ ▀ ▀ ▀${reset}
5027
5028 ${boldon}${yellowf} ▄███████▄ ${redf} ▄██████▄ ${greenf} ▄██████▄ ${bluef} ▄██████▄ ${purplef} ▄██████▄ ${cyanf} ▄██████▄${reset}
5029 ${boldon}${yellowf}▄█████████▀▀ ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄ ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄ ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄ ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄ ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5030 ${boldon}${yellowf}███████▀ ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███ ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███ ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███ ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███ ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5031 ${boldon}${yellowf}███████▄ ${redf}████████████ ${greenf}████████████ ${bluef}████████████ ${purplef}████████████ ${cyanf}████████████${reset}
5032 ${boldon}${yellowf}▀█████████▄▄ ${redf}██▀██▀▀██▀██ ${greenf}██▀██▀▀██▀██ ${bluef}██▀██▀▀██▀██ ${purplef}██▀██▀▀██▀██ ${cyanf}██▀██▀▀██▀██${reset}
5033 ${boldon}${yellowf} ▀███████▀ ${redf}▀ ▀ ▀ ▀ ${greenf}▀ ▀ ▀ ▀ ${bluef}▀ ▀ ▀ ▀ ${purplef}▀ ▀ ▀ ▀ ${cyanf}▀ ▀ ▀ ▀${reset}
5034
5035 EOF
5036 #+end_src
5037
5038 *** invade-em
5039 :PROPERTIES:
5040 :header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
5041 :END:
5042
5043 #+begin_src bash
5044 #
5045 # ANSI color scheme script featuring Space Invaders
5046 #
5047 # Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5048 # Modified by lolilolicon
5049 #
5050
5051 f=3 b=4
5052 for j in f b; do
5053 for i in {0..7}; do
5054 printf -v $j$i %b "\e[${!j}${i}m"
5055 done
5056 done
5057 bld=$'\e[1m'
5058 rst=$'\e[0m'
5059
5060 cat << EOF
5061
5062 $f1 ▀▄ ▄▀ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4 ▀▄ ▄▀ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
5063 $f1 ▄█▀███▀█▄ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4 ▄█▀███▀█▄ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
5064 $f1█▀███████▀█ $f2▀▀███▀▀███▀▀ $f3▀█▀██▀█▀ $f4█▀███████▀█ $f5▀▀███▀▀███▀▀ $f6▀█▀██▀█▀$rst
5065 $f1▀ ▀▄▄ ▄▄▀ ▀ $f2 ▀█▄ ▀▀ ▄█▀ $f3▀▄ ▄▀ $f4▀ ▀▄▄ ▄▄▀ ▀ $f5 ▀█▄ ▀▀ ▄█▀ $f6▀▄ ▄▀$rst
5066
5067 $bld$f1▄ ▀▄ ▄▀ ▄ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4▄ ▀▄ ▄▀ ▄ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
5068 $bld$f1█▄█▀███▀█▄█ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4█▄█▀███▀█▄█ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
5069 $bld$f1▀█████████▀ $f2▀▀▀██▀▀██▀▀▀ $f3▀▀█▀▀█▀▀ $f4▀█████████▀ $f5▀▀▀██▀▀██▀▀▀ $f6▀▀█▀▀█▀▀$rst
5070 $bld$f1 ▄▀ ▀▄ $f2▄▄▀▀ ▀▀ ▀▀▄▄ $f3▄▀▄▀▀▄▀▄ $f4 ▄▀ ▀▄ $f5▄▄▀▀ ▀▀ ▀▀▄▄ $f6▄▀▄▀▀▄▀▄$rst
5071
5072
5073 $f7▌$rst
5074
5075 $f7▌$rst
5076
5077 $f7 ▄█▄ $rst
5078 $f7▄█████████▄$rst
5079 $f7▀▀▀▀▀▀▀▀▀▀▀$rst
5080
5081 EOF
5082 #+end_src