git.shemshak.org - ~bandali/configs/blob - rc.org

   1 #+title: rc.org
   2 #+property: header-args :comments link :mkdirp yes :results silent
   3
   4 * About
   5
   6 This org file contains the configuration files of pretty much every
   7 program I use. The files are tangled (i.e. exported, or derived) from
   8 this file using =org-babel=.
   9
  10 Note: This file is best viewed inside Emacs with org mode.
  11
  12 * Configs
  13
  14 This section contains the configuration files (dotfiles) of various
  15 programs I use.
  16
  17 ** bspwm
  18
  19 *** bspwmrc
  20 :PROPERTIES:
  21 :header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
  22 :END:
  23
  24 #+begin_src sh :tangle no
  25 sxhkd &
  26 sh ~/.fehbg &
  27 xfce4-panel -d &
  28 compton &
  29 sleep 0.5 && pasystray --notify=all &
  30
  31 bspc monitor -d I II III IV V VI VII VIII IX X
  32 #bspc monitor eDP-1 -d I II III IV V
  33 #bspc monitor HDMI-1 -d VI VII VIII IX X
  34
  35 #bspc config border_width         2
  36 #bspc config window_gap           8
  37 bspc config window_gap           0
  38
  39 bspc config bottom_padding 26
  40
  41 bspc config split_ratio          0.52
  42 bspc config borderless_monocle   true
  43 bspc config gapless_monocle      true
  44 bspc config click_to_focus       button1
  45 bspc config directional_focus_tightness low
  46
  47 #bspc rule -a Firefox desktop='^1' follow=on
  48 bspc rule -a Nightly desktop='^1' follow=on
  49 bspc rule -a Emacs desktop='^2' state=tiled follow=on
  50 #bspc rule -a Chromium desktop='^4' follow=on
  51 bspc rule -a URxvt state=floating
  52 bspc rule -a URxvt:tiled state=tiled
  53 bspc rule -a Connman-gtk state=floating
  54 bspc rule -a Xfce4-panel state=floating
  55 bspc rule -a TelegramDesktop state=floating
  56 bspc rule -a Ec state=floating
  57 bspc rule -a Pavucontrol state=floating
  58 bspc rule -a Eog state=floating
  59 bspc rule -a Seahorse state=floating
  60 bspc rule -a mpv state=floating
  61 bspc rule -a Evince state=floating
  62 bspc rule -a Meld state=floating
  63 bspc rule -a Autokey-gtk state=floating
  64 bspc rule -a Mousepad state=floating
  65 bspc rule -a Wrapper-1.0 state=floating
  66 bspc rule -a File-roller state=floating
  67 bspc rule -a Gnome-disks state=floating
  68 bspc rule -a Termite state=floating
  69 bspc rule -a Termite:tiled state=tiled
  70 bspc rule -a Thunderbird:Calendar state=floating
  71 bspc rule -a Audacity state=floating
  72 bspc rule -a Proof state=floating # pvs x-show-proof
  73 bspc rule -a Nm-connection-editor state=floating
  74 bspc rule -a Wire state=floating
  75 bspc rule -a discord state=floating
  76 bspc rule -a X2goclient state=floating
  77 bspc rule -a SimpleScreenRecorder state=floating
  78 bspc rule -a Gimp state=floating
  79 bspc rule -a Wrapper-2.0 state=floating
  80 bspc rule -a Zathura state=tiled
  81 #+end_src
  82
  83 *** sxhkdrc
  84 :PROPERTIES:
  85 :header-args+: :tangle ~/.config/sxhkd/sxhkdrc
  86 :END:
  87
  88 #+begin_src conf :tangle no
  89 #
  90 # wm independent hotkeys
  91 #
  92
  93 # terminal emulator
  94 super + {_,shift} + Return
  95         urxvt{_, -name tiled}
  96
  97 #super + {_,shift} + Return
  98 #       termite{_, --name=tiled}
  99
 100 # program launcher
 101 super + space
 102         rofi -show run -display-run '> ' -display-window ' 🗔 '
 103
 104 super + alt + space
 105         xfce4-popup-whiskermenu
 106
 107 # window finder
 108 super + backslash
 109         rofi -show window  -display-run '> ' -display-window ' 🗔 '
 110
 111 # password manager
 112 alt + space
 113         rofi-pass
 114
 115 # firefox
 116 #super + r
 117 #       firefox
 118
 119 # chromium
 120 #super + c
 121 #       chromium -incognito
 122
 123 # emacs
 124 super + e
 125         emacs
 126
 127 # make sxhkd reload its configuration files:
 128 super + Escape
 129         pkill -USR1 -x sxhkd
 130
 131 # volume {up,down}
 132 XF86Audio{Raise,Lower}Volume
 133         pamixer --allow-boost --{in,de}crease 5
 134
 135 # mute
 136 XF86AudioMute
 137         pamixer --toggle-mute
 138
 139 XF86AudioMicMute
 140         pactl set-source-mute 1 toggle
 141
 142 # playback control
 143 XF86Audio{Play,Prev,Next}
 144         mpc {toggle,prev,next}
 145
 146 # lock the screen
 147 super + shift + q
 148         light-locker-command -l
 149
 150 # Toggle keyboard layout
 151 super + F7
 152         toggle-layout
 153
 154 # Toggle Xfce presentation mode
 155 XF86LaunchB
 156         toggle-presentation-mode
 157
 158 # monitor brightness
 159 XF86MonBrightness{Up,Down}
 160         light -{A,U} 5
 161
 162 super + apostrophe
 163         rofi-light
 164
 165 # keyboard brightness
 166 #XF86KbdBrightness{Up,Down}
 167 #       kbdlight {up,down}
 168
 169 XF86RotateWindows
 170         toggle-tablet
 171
 172 #
 173 # bspwm hotkeys
 174 #
 175
 176 # quit bspwm normally
 177 super + alt + Escape
 178         bspc quit
 179
 180 # close and kill
 181 super + {w,q}
 182         bspc node -{c,k}
 183
 184 # alternate between the tiled and monocle layout
 185 super + m
 186         bspc desktop -l next
 187
 188 # send the newest marked node to the newest preselected node
 189 super + y
 190         bspc node newest.marked.local -n newest.!automatic.local
 191
 192 # swap the current node and the biggest node
 193 super + g
 194         bspc node -s biggest
 195
 196 #
 197 # state/flags
 198 #
 199
 200 # set the window state
 201 super + {t,shift + t,s,f}
 202         bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
 203
 204 # set the node flags
 205 super + ctrl + {m,x,y,z}
 206         bspc node -g {marked,locked,sticky,private}
 207
 208 #
 209 # focus/swap
 210 #
 211
 212 # focus the node in the given direction
 213 super + {_,shift + }{h,j,k,l}
 214         bspc node -{f,s} {west,south,north,east}
 215
 216 # focus the node for the given path jump
 217 super + {p,b,comma,period}
 218         bspc node -f @{parent,brother,first,second}
 219
 220 # focus the next/previous node in the current desktop
 221 super + {_,shift + }c
 222         bspc node -f {next,prev}.local
 223
 224 # focus the next/previous desktop in the current monitor
 225 super + bracket{left,right}
 226         bspc desktop -f {prev,next}.local
 227
 228 # send to next/prev desktop
 229 super + shift + bracket{left,right}
 230         bspc node -d {prev,next} --follow
 231
 232 # focus the last node/desktop
 233 super + {grave,Tab}
 234         bspc {node,desktop} -f last
 235
 236 # focus the older or newer node in the focus history
 237 super + {o,i}
 238         bspc wm -h off; \
 239         bspc node {older,newer} -f; \
 240         bspc wm -h on
 241
 242 # focus or send to the given desktop
 243 super + {_,shift + }{1-9,0}
 244         bspc {desktop -f,node -d} '^{1-9,10}'
 245
 246 #
 247 # preselect
 248 #
 249
 250 # preselect the direction
 251 super + ctrl + {h,j,k,l}
 252         bspc node -p {west,south,north,east}
 253
 254 # preselect the ratio
 255 super + ctrl + {1-9}
 256         bspc node -o 0.{1-9}
 257
 258 # cancel the preselection for the focused node
 259 super + ctrl + space
 260         bspc node -p cancel
 261
 262 # cancel the preselection for the focused desktop
 263 super + ctrl + shift + space
 264         bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
 265
 266 #
 267 # move/resize
 268 #
 269
 270 # expand a window by moving one of its side outward
 271 super + alt + {h,j,k,l}
 272         bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
 273
 274 # contract a window by moving one of its side inward
 275 super + alt + shift + {h,j,k,l}
 276         bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
 277
 278 # move a floating window
 279 super + {Left,Down,Up,Right}
 280         bspc node -v {-20 0,0 20,0 -20,20 0}
 281
 282 #alt + bracket{left,right}
 283 #       xdotool key --clearmodifiers ctrl+Page_{Up,Down}
 284 #+end_src
 285
 286 ** compton
 287 :PROPERTIES:
 288 :header-args+: :tangle ~/.config/compton.conf
 289 :END:
 290
 291 #+begin_src conf :tangle no
 292 # Shadow
 293 shadow = false;                 # Enabled client-side shadows on windows.
 294 no-dock-shadow = true;          # Avoid drawing shadows on dock/panel windows.
 295 no-dnd-shadow = true;           # Don't draw shadows on DND windows.
 296 clear-shadow = true;            # Zero the part of the shadow's mask behind the
 297                                 # window. Fix some weirdness with ARGB windows.
 298 shadow-radius = 5;              # The blur radius for shadows. (default 12)
 299 shadow-offset-x = -5;           # The left offset for shadows. (default -15)
 300 shadow-offset-y = -5;           # The top offset for shadows. (default -15)
 301 # shadow-opacity = 0.7;         # The translucency for shadows. (default .75)
 302 # shadow-red = 0.0;             # Red color value of shadow. (0.0 - 1.0, defaults to 0)
 303 # shadow-green = 0.0;           # Green color value of shadow. (0.0 - 1.0, defaults to 0)
 304 # shadow-blue = 0.0;            # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
 305 shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ];    # Exclude conditions for shadows.
 306 # shadow-exclude = "n:e:Notification";
 307 #shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
 308 shadow-ignore-shaped = true;    # Avoid drawing shadow on all shaped windows
 309                                 # (see also: --detect-rounded-corners)
 310
 311 # Opacity
 312 menu-opacity = 1.0;                     # The opacity for menus. (default 1.0)
 313 #inactive-opacity = 0.9;                        # Default opacity of inactive windows. (0.0 - 1.0)
 314 # active-opacity = 0.8;                 # Default opacity for active windows. (0.0 - 1.0)
 315 frame-opacity = 1.0;                    # Opacity of window titlebars and borders. (0.1 - 1.0)
 316 # inactive-opacity-override = true;     # Let inactive opacity set by 'inactive-opacity' overrides
 317                                         # value of _NET_WM_OPACITY. Bad choice.
 318 alpha-step = 0.06;                      # XRender backend: Step size for alpha pictures. Increasing
 319                                         # it may result in less X resource usage,
 320                                         # Yet fading may look bad.
 321 #inactive-dim = 0.5;                    # Dim inactive windows. (0.0 - 1.0)
 322 #inactive-dim-fixed = true;             # Do not let dimness adjust based on window opacity.
 323 # blur-background = true;               # Blur background of transparent windows.
 324                                         # Bad performance with X Render backend.
 325                                         # GLX backend is preferred.
 326 # blur-background-frame = true;         # Blur background of opaque windows with transparent
 327                                         # frames as well.
 328 blur-background-fixed = true;           # Do not let blur radius adjust based on window opacity.
 329 blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
 330                                         # Exclude conditions for background blur.
 331
 332 # Fading
 333 fading = false;                 # Fade windows during opacity changes.
 334 fade-delta = 3;         # The time between steps in a fade in milliseconds. (default 10).
 335 fade-in-step = 0.03;            # Opacity change between steps while fading in. (default 0.028).
 336 fade-out-step = 0.03;           # Opacity change between steps while fading out. (default 0.03).
 337 # no-fading-openclose = true;   # Avoid fade windows in/out when opening/closing.
 338 fade-exclude = [ ];             # Exclude conditions for fading.
 339
 340 # Other
 341 backend = "glx"                 # Backend to use: "xrender" or "glx". GLX backend is typically
 342                                 # much faster but depends on a sane driver.
 343 mark-wmwin-focused = true;      # Try to detect WM windows and mark them as active.
 344 mark-ovredir-focused = true;    # Mark all non-WM but override-redirect windows active (e.g. menus).
 345 use-ewmh-active-win = true;     # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
 346                                 # instead of using FocusIn/Out events. Usually more reliable but
 347                                 # depends on a EWMH-compliant WM.
 348 detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
 349 detect-client-opacity = true;   # Detect _NET_WM_OPACITY on client windows, useful for window
 350                                 # managers not passing _NET_WM_OPACITY of client windows to frame
 351                                 # windows.
 352 refresh-rate = 0;               # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
 353 vsync = "drm";                  # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
 354                                 # See man page for more details.
 355 dbe = false;                    # Enable DBE painting mode. Rarely needed.
 356 paint-on-overlay = true;        # Painting on X Composite overlay window. Recommended.
 357 sw-opti = false;                # Limit compton to repaint at most once every 1 / refresh_rate.
 358                                 # Incompatible with certain VSync methods.
 359 unredir-if-possible = false;    # Unredirect all windows if a full-screen opaque window is
 360                                 # detected, to maximize performance for full-screen windows.
 361 focus-exclude = [ ];            # A list of conditions of windows that should always be considered
 362                                 # focused.
 363 detect-transient = true;        # Use WM_TRANSIENT_FOR to group windows, and consider windows in
 364                                 # the same group focused at the same time.
 365 detect-client-leader = true;    # Use WM_CLIENT_LEADER to group windows.
 366 invert-color-include = [ ];     # Conditions for windows to be painted with inverted color.
 367
 368 # GLX backend                   # GLX backend fine-tune options. See man page for more info.
 369 glx-no-stencil = true;          # Recommended.
 370 glx-copy-from-front = false;    # Useful with --glx-swap-method,
 371 # glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
 372 # glx-no-rebind-pixmap = true;  # Recommended if it works.
 373 glx-no-rebind-pixmap = true;    # Recommended if it works.
 374 #glx-swap-method = "4"; # See man page.
 375 glx-swap-method = "4";  # See man page.
 376
 377 # Window type settings
 378 wintypes:
 379 {
 380   tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
 381   menu = { shadow = false; };
 382   dropdown_menu = { shadow = false; };
 383   popup_menu =  { shadow = false; };
 384   utility =  { shadow = false; };
 385   # fade: Fade the particular type of windows.
 386   # shadow: Give those windows shadow
 387   # opacity: Default opacity for the type of windows.
 388   # focus: Whether to always consider windows of this type focused.
 389 };
 390 #+end_src
 391
 392 ** Dunst
 393 :PROPERTIES:
 394 :header-args+: :tangle ~/.config/dunst/dunstrc
 395 :END:
 396
 397 #+begin_src conf
 398 [global]
 399 #font = Ubuntu Mono 10.5
 400 font = Inconsolata 11
 401
 402 # Path to default icons.
 403 icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
 404
 405 icon_position = left
 406 # <b>bold</b>
 407 # <i>italic</i>
 408 # <s>strikethrough<s/>
 409 # <u>underline</u>
 410 markup = full
 411 # The format of the message. Possible variables are:
 412 #   %a  appname
 413 #   %s  summary
 414 #   %b  body
 415 #   %i  iconname (including its path)
 416 #   %I  iconname (without its path)
 417 #   %p  progress value if set ([  0%] to [100%]) or nothing
 418 # Markup is allowed
 419 format = "<b>%s</b>\n%b"
 420 # Sort messages by urgency
 421 sort = yes
 422 # Show how many messages are currently hidden (because of geometry)
 423 indicate_hiddenl= no
 424 # Alignment of message text.
 425 # Possible values are "left", "center" and "right"
 426 alignment = center
 427 # The frequency with wich text that is longer than the notification
 428 # window allows bounces back and forth.
 429 # This option conflicts with 'word_wrap'.
 430 # Set to 0 to disable
 431 bounce_freq = 3
 432 # show age of message if message is older than show_age_threshold seconds.
 433 # set to -1 to disable
 434 show_age_threshold = -1
 435 # split notifications into multiple lines if they don't fit into geometry
 436 word_wrap = yes
 437 # ignore newlines '\n' in notifications
 438 ignore_newline = no
 439 # The geometry of the message window.
 440 # geometry [{width}]x{height}][+/-{x}+/-{y}]
 441 # The height is measured in number of notifications everything else in pixels. If the width
 442 # is omitted but the height is given ("-geometry x2"), the message window
 443 # expands over the whole screen (dmenu-like). If width is 0,
 444 # the window expands to the longest message displayed.
 445 # A positive x is measured from the left, a negative from the
 446 # right side of the screen.  Y is measured from the top and down respectevly.
 447 # The width can be negative. In this case the actual width is the
 448 # screen width minus the width defined in within the geometry option.
 449 #geometry = "410x12-12+12"
 450 #geometry = "0x0-30-30"
 451 geometry = "260x12-30-30"
 452 # The transparency of the window. range: [0; 100]
 453 # This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
 454 transparency = 0
 455 # Don't remove messages, if the user is idle (no mouse or keyboard input)
 456 # for longer than idle_threshold seconds.
 457 # Set to 0 to disable.
 458 idle_threshold = 120
 459 # Which monitor should the notifications be displayed on.
 460 monitor = 0
 461 # Display notification on focused monitor. Possible modes are:
 462 # mouse: follow mouse pointer
 463 # keyboard: follow window with keyboard focus
 464 # none: don't follow anything
 465 #
 466 # "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
 467 # This should be the case for almost all modern windowmanagers.
 468 #
 469 # If this option is set to mouse or keyboard, the monitor option will be
 470 # ignored.
 471 follow = keyboard
 472 # should a notification popped up from history be sticky or
 473 # timeout as if it would normally do.
 474 sticky_history = yes
 475 # The height of a single line. If the height is smaller than the font height,
 476 # it will get raised to the font height.
 477 # This adds empty space above and under the text.
 478 line_height = 0
 479
 480 show_indicators = yes
 481
 482 # Draw a line of 'separatpr_height' pixel height between two notifications.
 483 # Set to 0 to disable
 484 separator_height = 3
 485 # padding between text and separator
 486 padding = 8
 487 # horizontal padding
 488 horizontal_padding = 8
 489 # Define a color for the separator.
 490 # possible values are:
 491 #  * auto: dunst tries to find a color fitting to the background
 492 #  * foreground: use the same color as the foreground
 493 #  * frame: use the same color as the frame.
 494 #  * anything else will be interpreted as a X color
 495 separator_color = foreground
 496 # print a notification on startup
 497 # This is mainly for error detection, since dbus (re-)starts dunst
 498 # automatically after a crash.
 499 startup_notification = false
 500 # dmenu path
 501 #dmenu = /usr/bin/dmenu -p dunst:
 502 dmenu = /usr/bin/rofi -dmenu -p dunst:
 503 # browser for opening urls in context menu
 504 browser = /usr/bin/firefox -new-tab
 505 [frame]
 506 width = 0
 507 color = "#377222"
 508 [shortcuts]
 509 # shortcuts are specified as [modifier+][modifier+]...key
 510 # available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
 511 # and 'mod4' (windows-key)
 512 # xev might be helpful to find names for keys
 513 # close notification
 514 close = ctrl+space
 515 # close all notifications
 516 close_all = ctrl+shift+space
 517 # redisplay last message(s)
 518 # On the US keyboard layout 'grave' is normally above TAB and left of '1'.
 519 history = ctrl+shift+h
 520 # context menu
 521 context = ctrl+shift+period
 522 [urgency_low]
 523 # IMPORTANT: colors have to be defined in quotation marks.
 524 # Otherwise the '#' and following  would be interpreted as a comment.
 525 background = "#1d2a30"
 526 foreground = "#71c2af"
 527 timeout = 3
 528 [urgency_normal]
 529 background = "#1d2a30"
 530 foreground = "#71c2af"
 531 timeout = 0
 532 [urgency_critical]
 533 background = "#1d2a30"
 534 foreground = "#ff9982"
 535 timeout = 0
 536
 537 # Every section that isn't one of the above is interpreted as a rules
 538 # to override settings for certain messages.
 539 # Messages can be matched by 'appname', 'summary', 'body' or 'icon'
 540 # and you can override the 'timeout', 'urgency', 'foreground', 'background'
 541 # and 'format'.
 542 # Shell-like globbing will get expanded.
 543 #
 544 # SCRIPTING
 545 # you can specify a script that gets run when the rule matches by setting
 546 # the 'script' option.
 547 # The script will be called as follows:
 548 # script appname summary body icon urgency
 549 # where urgency can be "LOW", "NORMAL" or "CRITICAL".
 550 #
 551 # NOTE: if you don't want a notification to be displayed, set the format to ""
 552 # NOTE: It might be helpful to run dunst -print in a terminal in order to find
 553 # fitting options for rules.
 554 #[espeak]
 555 #    summary = "*"
 556 #    script = dunst_espeak.sh
 557 #[script-test]
 558 #    summary = "*script*"
 559 #    script = dunst_test.sh
 560 #[ignore]
 561 ## This notification will not be displayed
 562 #    summary = "foobar"
 563 #    format = ""
 564 #[signed_on]
 565 #    appname = Pidgin
 566 #    summary = "*signed on*"
 567 #    urgency = low
 568 #
 569 #[signed_off]
 570 #    appname = Pidgin
 571 #    summary = *signed off*
 572 #    urgency = low
 573 #
 574 #[says]
 575 #    appname = Pidgin
 576 #    summary = *says*
 577 #    urgency = critical
 578 #
 579 #[twitter]
 580 #    appname = Pidgin
 581 #    summary = *twitter.com*
 582 #    urgency = normal
 583 #
 584 [xfpm-backlight]
 585     summary = *Brightness*
 586     urgency = low
 587 #+end_src
 588
 589 ** Fontconfig
 590 :PROPERTIES:
 591 :header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
 592 :END:
 593
 594 #+begin_src xml
 595 <?xml version="1.0"?>
 596 <!DOCTYPE fontconfig SYSTEM "fonts.dtd">
 597 <fontconfig>
 598  <match target="font">
 599   <edit mode="assign" name="rgba">
 600    <const>rgb</const>
 601   </edit>
 602  </match>
 603  <match target="font">
 604   <edit mode="assign" name="hinting">
 605    <bool>true</bool>
 606   </edit>
 607  </match>
 608  <match target="font">
 609   <edit mode="assign" name="hintstyle">
 610    <const>hintslight</const>
 611   </edit>
 612  </match>
 613  <match target="font">
 614   <edit mode="assign" name="antialias">
 615    <bool>true</bool>
 616   </edit>
 617  </match>
 618  <match target="font">
 619   <edit mode="assign" name="lcdfilter">
 620    <const>lcddefault</const>
 621   </edit>
 622  </match>
 623  <dir>~/.fonts</dir>
 624
 625  <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
 626  <alias binding="same">
 627   <family>Helvetica</family>
 628   <accept>
 629    <family>Liberation Sans</family>
 630   </accept>
 631 </alias>
 632 </fontconfig>
 633 #+end_src
 634
 635 ** Git
 636
 637 *** gitconfig
 638 :PROPERTIES:
 639 :header-args+: :tangle ~/.gitconfig
 640 :END:
 641
 642 **** user
 643 #+begin_src conf
 644 [user]
 645     name = Amin Bandali
 646     email = amin@aminb.org
 647     signingkey = 4E05246AB0BF7FFB
 648 #+end_src
 649
 650 **** signing
 651 #+begin_src conf
 652 [commit]
 653     gpgsign = true
 654 # [format]
 655 #     signoff = true
 656 #+end_src
 657
 658 **** core
 659 #+begin_src conf
 660 [core]
 661     autocrlf = input  # CRLF -> LF on commit
 662     editor = emacsclient -t
 663     excludesfile = ~/.gitignore_global
 664     pager = "less"
 665 #+end_src
 666
 667 **** gpg
 668 #+begin_src conf
 669 [gpg]
 670     program = gpg2
 671 #+end_src
 672
 673 **** alias
 674 #+begin_src conf
 675 [alias]
 676     git = !exec git  # handle nested git calls, e.g. git git status
 677     aliases = config --get-regexp '^alias\\.'
 678     a = add
 679     s = status
 680     sl = status --long
 681     c = checkout
 682     cb = checkout -b
 683     b = branch
 684     r = rebase
 685     p = pull
 686     pr = pull --rebase
 687     ps = push
 688     psf = push --force
 689 #+end_src
 690
 691 **** color
 692 #+begin_src conf
 693 [color]
 694     ui = auto
 695 [color "status"]
 696     added = green bold
 697     changed = red bold
 698     untracked = red bold
 699 [color "branch"]
 700     current = green bold
 701     remote = magenta bold
 702 [color "diff"]
 703     new = green bold
 704     old = red bold
 705 #+end_src
 706
 707 **** status
 708 #+begin_src conf
 709 [status]
 710     # showUntrackedFiles = all
 711     short=true
 712     branch=true
 713 #+end_src
 714
 715 **** github
 716 #+begin_src conf
 717 [github]
 718         user = aminb
 719 #+end_src
 720
 721 **** send-email
 722 #+begin_src conf
 723 [sendemail]
 724         smtpuser = amin@aminb.org
 725         smtpserver = nix.aminb.org
 726         smtpserverport = 587
 727         smtpencryption = tls
 728         annotate = yes
 729 #+end_src
 730
 731 *** gitignore
 732 :PROPERTIES:
 733 :header-args+: :tangle ~/.gitignore_global
 734 :END:
 735
 736 #+begin_src conf
 737 *.orig
 738 *.py[co]
 739 *.sublime-workspace
 740 *~
 741 .DS_Store
 742 *.elc
 743 *-autoloads.el
 744 #+end_src
 745
 746 ** Latexmk
 747 :PROPERTIES:
 748 :header-args+: :tangle ~/.latexmkrc
 749 :END:
 750
 751 #+begin_src conf
 752 $pdf_previewer = "start zathura %O %S";
 753 $clean_ext = "aux out";
 754
 755 # $pdf_update_method = 4;
 756 # $pdf_update_command = "zathura %O %S";
 757
 758 # Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
 759 # by Ctrl+click in the PDF.
 760 # Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
 761 # editor.
 762 # $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
 763 #+end_src
 764
 765 ** libinput
 766
 767 Improve XPS 15 9560's touchpad experience.
 768
 769 # begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
 770 #+begin_src conf :tangle no
 771 Section "InputClass"
 772     Identifier "libinput touchpad catchall"
 773     Driver "libinput"
 774     MatchIsTouchpad "on"
 775     Option "ClickMethod" "clickfinger"
 776     Option "NaturalScrolling" "true"
 777     Option "Tapping" "on"
 778     Option "TappingButtonMap" "lrm"
 779 EndSection
 780 #+end_src
 781
 782 ** getmail
 783
 784 *** getmailrc
 785 :PROPERTIES:
 786 :header-args+: :tangle ~/.getmail/getmailrc
 787 :END:
 788
 789 #+begin_src conf
 790 [retriever]
 791 type = SimplePOP3SSLRetriever
 792 server = fencepost.gnu.org
 793 username = aminb
 794 password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
 795 port = 995
 796 use_apop = True
 797
 798 [destination]
 799 type = Maildir
 800 path = ~/mail/gnu/Inbox/
 801
 802 [options]
 803 delete = True
 804 #+end_src
 805
 806 *** getmail.service
 807 :PROPERTIES:
 808 :header-args+: :tangle ~/.config/systemd/user/getmail.service
 809 :END:
 810
 811 #+begin_src conf :tangle no
 812 [Unit]
 813 Description=getmail service
 814
 815 [Service]
 816 Type=oneshot
 817 ExecStart=/usr/bin/getmail
 818 StandardOutput=syslog
 819 StandardError=syslog
 820 #+end_src
 821
 822 *** getmail.timer
 823 :PROPERTIES:
 824 :header-args+: :tangle ~/.config/systemd/user/getmail.timer
 825 :END:
 826
 827 #+begin_src conf :tangle no
 828 [Unit]
 829 Description=getmail timer
 830
 831 [Timer]
 832 OnCalendar=*:0/30
 833 Persistent=true
 834 Unit=getmail.service
 835
 836 [Install]
 837 WantedBy=timers.target
 838 #+end_src
 839
 840 ** GnuPG
 841 :PROPERTIES:
 842 :header-args+: :tangle ~/.gnupg/gpg-agent.conf
 843 :END:
 844
 845 #+begin_src conf
 846 default-cache-ttl 43200
 847 max-cache-ttl 43200
 848
 849 default-cache-ttl-ssh 10800
 850 max-cache-ttl-ssh 10800
 851
 852 # pinentry-program /usr/bin/pinentry-qt
 853 #+end_src
 854
 855 ** GTK
 856
 857 *** gtk-2.0
 858 :PROPERTIES:
 859 :header-args+: :tangle ~/.gtkrc-2.0
 860 :END:
 861
 862 #+begin_src conf
 863 gtk-theme-name="Greybird"
 864 gtk-icon-theme-name="Paper"
 865 gtk-font-name="Ubuntu 10"
 866 gtk-menu-images=0
 867 # gtk-key-theme-name = "Emacs"
 868 #+end_src
 869
 870 *** gtk-3.0
 871 :PROPERTIES:
 872 :header-args+: :tangle ~/.config/gtk-3.0/settings.ini
 873 :END:
 874
 875 #+begin_src conf :tangle no
 876 [Settings]
 877 gtk-icon-theme-name = Paper
 878 # gtk-theme-name = Adwaita
 879
 880 gtk-theme-name = Greybird
 881 # gtk-theme-name = Arc-Darker
 882 # gtk-theme-name = Numix-ArchBlue
 883
 884 gtk-font-name = Ubuntu 10
 885 # gtk-key-theme-name = Emacs
 886 #+end_src
 887
 888 ** isync
 889
 890 *** mbsyncrc
 891 :PROPERTIES:
 892 :header-args+: :tangle ~/.mbsyncrc
 893 :END:
 894
 895 #+begin_src conf
 896 # Global defaults
 897 CopyArrivalDate yes
 898
 899 ######
 900 IMAPAccount amin
 901 Host nix.aminb.org
 902 User amin@aminb.org
 903 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
 904 SSLType IMAPS
 905
 906 IMAPStore amin-remote
 907 Account amin
 908
 909 MaildirStore amin-local
 910 Path ~/mail/amin/
 911 Inbox ~/mail/amin/Inbox
 912 SubFolders Verbatim
 913
 914 Channel amin
 915 Master :amin-remote:
 916 Slave :amin-local:
 917 Patterns * !dovecot*
 918 Create Both
 919 SyncState *
 920
 921 ######
 922 IMAPAccount uwaterloo
 923 Host connect.uwaterloo.ca
 924 User abandali
 925 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
 926 SSLType IMAPS
 927
 928 IMAPStore uwaterloo-remote
 929 Account uwaterloo
 930
 931 MaildirStore uwaterloo-local
 932 Path ~/mail/uwaterloo/
 933 Inbox ~/mail/uwaterloo/Inbox
 934 SubFolders Verbatim
 935
 936 Channel uwaterloo
 937 Master :uwaterloo-remote:
 938 Slave :uwaterloo-local:
 939 Patterns * !dovecot*
 940 Create Both
 941 SyncState *
 942 #+end_src
 943
 944 *** mbsync.service
 945 :PROPERTIES:
 946 :header-args+: :tangle ~/.config/systemd/user/mbsync.service
 947 :END:
 948
 949 #+begin_src conf :tangle no
 950 [Unit]
 951 Description=mbsync service
 952
 953 [Service]
 954 Type=oneshot
 955 ExecStart=/usr/bin/mbsync -Va
 956 StandardOutput=syslog
 957 StandardError=syslog
 958 #+end_src
 959
 960 *** mbsync.timer
 961 :PROPERTIES:
 962 :header-args+: :tangle ~/.config/systemd/user/mbsync.timer
 963 :END:
 964
 965 #+begin_src conf :tangle no
 966 [Unit]
 967 Description=mbsync timer
 968
 969 [Timer]
 970 OnCalendar=*:0/15
 971 Persistent=true
 972 Unit=mbsync.service
 973
 974 [Install]
 975 WantedBy=timers.target
 976 #+end_src
 977
 978 ** mpd
 979 :PROPERTIES:
 980 :header-args+: :tangle ~/.config/mpd/mpd.conf
 981 :END:
 982
 983 #+begin_src conf
 984 # An example configuration file for MPD.
 985 # Read the user manual for documentation: http://www.musicpd.org/doc/user/
 986
 987
 988 # Files and directories #######################################################
 989 #
 990 # This setting controls the top directory which MPD will search to discover the
 991 # available audio files and add them to the daemon's online database. This
 992 # setting defaults to the XDG directory, otherwise the music directory will be
 993 # be disabled and audio files will only be accepted over ipc socket (using
 994 # file:// protocol) or streaming files over an accepted protocol.
 995 #
 996 music_directory         "~/usr/music"
 997 #
 998 # This setting sets the MPD internal playlist directory. The purpose of this
 999 # directory is storage for playlists created by MPD. The server will use
1000 # playlist files not created by the server but only if they are in the MPD
1001 # format. This setting defaults to playlist saving being disabled.
1002 #
1003 playlist_directory              "~/.mpd/playlists"
1004 #
1005 # This setting sets the location of the MPD database. This file is used to
1006 # load the database at server start up and store the database while the
1007 # server is not up. This setting defaults to disabled which will allow
1008 # MPD to accept files over ipc socket (using file:// protocol) or streaming
1009 # files over an accepted protocol.
1010 #
1011 db_file                 "~/.mpd/database"
1012 #
1013 # These settings are the locations for the daemon log files for the daemon.
1014 # These logs are great for troubleshooting, depending on your log_level
1015 # settings.
1016 #
1017 # The special value "syslog" makes MPD use the local syslog daemon. This
1018 # setting defaults to logging to syslog, otherwise logging is disabled.
1019 #
1020 log_file                        "~/.mpd/log"
1021 #
1022 # This setting sets the location of the file which stores the process ID
1023 # for use of mpd --kill and some init scripts. This setting is disabled by
1024 # default and the pid file will not be stored.
1025 #
1026 pid_file                        "~/.mpd/pid"
1027 #
1028 # This setting sets the location of the file which contains information about
1029 # most variables to get MPD back into the same general shape it was in before
1030 # it was brought down. This setting is disabled by default and the server
1031 # state will be reset on server start up.
1032 #
1033 state_file                      "~/.mpd/state"
1034 #
1035 # The location of the sticker database.  This is a database which
1036 # manages dynamic information attached to songs.
1037 #
1038 sticker_file                    "~/.mpd/sticker.sql"
1039 #
1040 ###############################################################################
1041
1042
1043 # General music daemon options ################################################
1044 #
1045 # This setting specifies the user that MPD will run as. MPD should never run as
1046 # root and you may use this setting to make MPD change its user ID after
1047 # initialization. This setting is disabled by default and MPD is run as the
1048 # current user.
1049 #
1050 #user                           "nobody"
1051 #
1052 # This setting specifies the group that MPD will run as. If not specified
1053 # primary group of user specified with "user" setting will be used (if set).
1054 # This is useful if MPD needs to be a member of group such as "audio" to
1055 # have permission to use sound card.
1056 #
1057 #group                          "nogroup"
1058 #
1059 # This setting sets the address for the daemon to listen on. Careful attention
1060 # should be paid if this is assigned to anything other then the default, any.
1061 # This setting can deny access to control of the daemon. Not effective if
1062 # systemd socket activiation is in use.
1063 #
1064 # For network
1065 #bind_to_address                "any"
1066 #
1067 # And for Unix Socket
1068 #bind_to_address                "~/.mpd/socket"
1069 #
1070 # This setting is the TCP port that is desired for the daemon to get assigned
1071 # to.
1072 #
1073 #port                           "6600"
1074 #
1075 # This setting controls the type of information which is logged. Available
1076 # setting arguments are "default", "secure" or "verbose". The "verbose" setting
1077 # argument is recommended for troubleshooting, though can quickly stretch
1078 # available resources on limited hardware storage.
1079 #
1080 #log_level                      "default"
1081 #
1082 # If you have a problem with your MP3s ending abruptly it is recommended that
1083 # you set this argument to "no" to attempt to fix the problem. If this solves
1084 # the problem, it is highly recommended to fix the MP3 files with vbrfix
1085 # (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
1086 # point gapless MP3 playback can be enabled.
1087 #
1088 #gapless_mp3_playback                   "yes"
1089 #
1090 # Setting "restore_paused" to "yes" puts MPD into pause mode instead
1091 # of starting playback after startup.
1092 #
1093 #restore_paused "no"
1094 #
1095 # This setting enables MPD to create playlists in a format usable by other
1096 # music players.
1097 #
1098 #save_absolute_paths_in_playlists       "no"
1099 #
1100 # This setting defines a list of tag types that will be extracted during the
1101 # audio file discovery process. The complete list of possible values can be
1102 # found in the user manual.
1103 #metadata_to_use        "artist,album,title,track,name,genre,date,composer,performer,disc"
1104 #
1105 # This setting enables automatic update of MPD's database when files in
1106 # music_directory are changed.
1107 #
1108 #auto_update    "yes"
1109 #
1110 # Limit the depth of the directories being watched, 0 means only watch
1111 # the music directory itself.  There is no limit by default.
1112 #
1113 #auto_update_depth "3"
1114 #
1115 ###############################################################################
1116
1117
1118 # Symbolic link behavior ######################################################
1119 #
1120 # If this setting is set to "yes", MPD will discover audio files by following
1121 # symbolic links outside of the configured music_directory.
1122 #
1123 #follow_outside_symlinks        "yes"
1124 #
1125 # If this setting is set to "yes", MPD will discover audio files by following
1126 # symbolic links inside of the configured music_directory.
1127 #
1128 #follow_inside_symlinks         "yes"
1129 #
1130 ###############################################################################
1131
1132
1133 # Zeroconf / Avahi Service Discovery ##########################################
1134 #
1135 # If this setting is set to "yes", service information will be published with
1136 # Zeroconf / Avahi.
1137 #
1138 #zeroconf_enabled               "yes"
1139 #
1140 # The argument to this setting will be the Zeroconf / Avahi unique name for
1141 # this MPD server on the network.
1142 #
1143 #zeroconf_name                  "Music Player"
1144 #
1145 ###############################################################################
1146
1147
1148 # Permissions #################################################################
1149 #
1150 # If this setting is set, MPD will require password authorization. The password
1151 # setting can be specified multiple times for different password profiles.
1152 #
1153 #password                        "password@read,add,control,admin"
1154 #
1155 # This setting specifies the permissions a user has who has not yet logged in.
1156 #
1157 #default_permissions             "read,add,control,admin"
1158 #
1159 ###############################################################################
1160
1161
1162 # Database #######################################################################
1163 #
1164
1165 #database {
1166 #       plugin "proxy"
1167 #       host "other.mpd.host"
1168 #       port "6600"
1169 #}
1170
1171 # Input #######################################################################
1172 #
1173
1174 input {
1175         plugin "curl"
1176 #       proxy "proxy.isp.com:8080"
1177 #       proxy_user "user"
1178 #       proxy_password "password"
1179 }
1180
1181 #
1182 ###############################################################################
1183
1184 # Audio Output ################################################################
1185 #
1186
1187 audio_output {
1188     type    "pulse"
1189     name    "pulse audio"
1190 }
1191
1192 audio_output {
1193     type    "fifo"
1194     name    "my_fifo"
1195     path    "/tmp/mpd.fifo"
1196     format  "44100:16:2"
1197 }
1198
1199 # MPD supports various audio output types, as well as playing through multiple
1200 # audio outputs at the same time, through multiple audio_output settings
1201 # blocks. Setting this block is optional, though the server will only attempt
1202 # autodetection for one sound card.
1203 #
1204 # An example of an ALSA output:
1205 #
1206 #audio_output {
1207 #       type            "alsa"
1208 #       name            "My ALSA Device"
1209 ##      device          "hw:0,0"        # optional
1210 ##      mixer_type      "hardware"      # optional
1211 ##      mixer_device    "default"       # optional
1212 ##      mixer_control   "PCM"           # optional
1213 ##      mixer_index     "0"             # optional
1214 #}
1215 #
1216 # An example of an OSS output:
1217 #
1218 #audio_output {
1219 #       type            "oss"
1220 #       name            "My OSS Device"
1221 ##      device          "/dev/dsp"      # optional
1222 ##      mixer_type      "hardware"      # optional
1223 ##      mixer_device    "/dev/mixer"    # optional
1224 ##      mixer_control   "PCM"           # optional
1225 #}
1226 #
1227 # An example of a shout output (for streaming to Icecast):
1228 #
1229 #audio_output {
1230 #       type            "shout"
1231 #       encoder         "vorbis"                # optional
1232 #       name            "My Shout Stream"
1233 #       host            "localhost"
1234 #       port            "8000"
1235 #       mount           "/mpd.ogg"
1236 #       password        "hackme"
1237 #       quality         "5.0"
1238 #       bitrate         "128"
1239 #       format          "44100:16:1"
1240 ##      protocol        "icecast2"              # optional
1241 ##      user            "source"                # optional
1242 ##      description     "My Stream Description" # optional
1243 ##      url             "http://example.com"    # optional
1244 ##      genre           "jazz"                  # optional
1245 ##      public          "no"                    # optional
1246 ##      timeout         "2"                     # optional
1247 ##      mixer_type      "software"              # optional
1248 #}
1249 #
1250 # An example of a recorder output:
1251 #
1252 #audio_output {
1253 #       type            "recorder"
1254 #       name            "My recorder"
1255 #       encoder         "vorbis"                # optional, vorbis or lame
1256 #       path            "/var/lib/mpd/recorder/mpd.ogg"
1257 ##      quality         "5.0"                   # do not define if bitrate is defined
1258 #       bitrate         "128"                   # do not define if quality is defined
1259 #       format          "44100:16:1"
1260 #}
1261 #
1262 # An example of a httpd output (built-in HTTP streaming server):
1263 #
1264 #audio_output {
1265 #       type            "httpd"
1266 #       name            "My HTTP Stream"
1267 #       encoder         "vorbis"                # optional, vorbis or lame
1268 #       port            "8000"
1269 #       bind_to_address "0.0.0.0"               # optional, IPv4 or IPv6
1270 ##      quality         "5.0"                   # do not define if bitrate is defined
1271 #       bitrate         "128"                   # do not define if quality is defined
1272 #       format          "44100:16:1"
1273 #       max_clients     "0"                     # optional 0=no limit
1274 #}
1275 #
1276 # An example of a pulseaudio output (streaming to a remote pulseaudio server)
1277 #
1278 #audio_output {
1279 #       type            "pulse"
1280 #       name            "My Pulse Output"
1281 ##      server          "remote_server"         # optional
1282 ##      sink            "remote_server_sink"    # optional
1283 #}
1284 #
1285 # An example of a winmm output (Windows multimedia API).
1286 #
1287 #audio_output {
1288 #       type            "winmm"
1289 #       name            "My WinMM output"
1290 ##      device          "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1291 #               or
1292 ##      device          "0"             # optional
1293 ##      mixer_type      "hardware"      # optional
1294 #}
1295 #
1296 # An example of an openal output.
1297 #
1298 #audio_output {
1299 #       type            "openal"
1300 #       name            "My OpenAL output"
1301 ##      device          "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1302 #}
1303 #
1304 # An example of an sndio output.
1305 #
1306 #audio_output {
1307 #       type            "sndio"
1308 #       name            "sndio output"
1309 #       mixer_type      "software"
1310 #}
1311 #
1312 # An example of an OS X output:
1313 #
1314 #audio_output {
1315 #       type            "osx"
1316 #       name            "My OS X Device"
1317 ##      device          "Built-in Output"       # optional
1318 ##      channel_map      "-1,-1,0,1"    # optional
1319 #}
1320 #
1321 ## Example "pipe" output:
1322 #
1323 #audio_output {
1324 #       type            "pipe"
1325 #       name            "my pipe"
1326 #       command         "aplay -f cd 2>/dev/null"
1327 ## Or if you're want to use AudioCompress
1328 #       command         "AudioCompress -m | aplay -f cd 2>/dev/null"
1329 ## Or to send raw PCM stream through PCM:
1330 #       command         "nc example.org 8765"
1331 #       format          "44100:16:2"
1332 #}
1333 #
1334 ## An example of a null output (for no audio output):
1335 #
1336 #audio_output {
1337 #       type            "null"
1338 #       name            "My Null Output"
1339 #       mixer_type      "none"                  # optional
1340 #}
1341 #
1342 ###############################################################################
1343
1344
1345 # Normalization automatic volume adjustments ##################################
1346 #
1347 # This setting specifies the type of ReplayGain to use. This setting can have
1348 # the argument "off", "album", "track" or "auto". "auto" is a special mode that
1349 # chooses between "track" and "album" depending on the current state of
1350 # random playback. If random playback is enabled then "track" mode is used.
1351 # See <http://www.replaygain.org> for more details about ReplayGain.
1352 # This setting is off by default.
1353 #
1354 #replaygain                     "album"
1355 #
1356 # This setting sets the pre-amp used for files that have ReplayGain tags. By
1357 # default this setting is disabled.
1358 #
1359 #replaygain_preamp              "0"
1360 #
1361 # This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1362 # By default this setting is disabled.
1363 #
1364 #replaygain_missing_preamp      "0"
1365 #
1366 # This setting enables or disables ReplayGain limiting.
1367 # MPD calculates actual amplification based on the ReplayGain tags
1368 # and replaygain_preamp / replaygain_missing_preamp setting.
1369 # If replaygain_limit is enabled MPD will never amplify audio signal
1370 # above its original level. If replaygain_limit is disabled such amplification
1371 # might occur. By default this setting is enabled.
1372 #
1373 #replaygain_limit               "yes"
1374 #
1375 # This setting enables on-the-fly normalization volume adjustment. This will
1376 # result in the volume of all playing audio to be adjusted so the output has
1377 # equal "loudness". This setting is disabled by default.
1378 #
1379 #volume_normalization           "no"
1380 #
1381 ###############################################################################
1382
1383 # Character Encoding ##########################################################
1384 #
1385 # If file or directory names do not display correctly for your locale then you
1386 # may need to modify this setting.
1387 #
1388 #filesystem_charset             "UTF-8"
1389 #
1390 ###############################################################################
1391 #+end_src
1392
1393 ** msmtp
1394 :PROPERTIES:
1395 :header-args+: :tangle ~/.msmtprc
1396 :END:
1397
1398 #+begin_src conf
1399 # Set default values for all following accounts.
1400 defaults
1401 port 587
1402 tls on
1403 auth on
1404 #tls_trust_file /etc/ssl/certs/ca-certificates.crt
1405 logfile ~/.msmtp.log
1406
1407 # aminb
1408 account aminb
1409 host nix.aminb.org
1410 tls_fingerprint 65:DD:B8:32:D8:CD:F1:DC:B6:34:EE:35:04:18:AC:09:F3:1D:6D:20:F2:4A:E2:BD:64:48:B7:1F:90:BD:C4:BA
1411 tls_starttls on
1412 from amin@aminb.org
1413 user amin@aminb.org
1414 passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
1415
1416 # gnu
1417 account gnu
1418 host fencepost.gnu.org
1419 # use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1420 tls_fingerprint 28:70:42:76:1C:EC:91:5F:D1:B3:27:A1:CD:3B:32:A4:8B:0B:DC:3A:CD:CA:F6:6F:E4:61:BA:69:D7:4D:0D:0B
1421 tls_starttls on
1422 from aminb@gnu.org
1423 user aminb
1424 passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
1425
1426 # uwaterloo
1427 account uwaterloo
1428 host connect.uwaterloo.ca
1429 tls_starttls on
1430 from abandali@uwaterloo.ca
1431 user abandali
1432 passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
1433 tls_trust_file /etc/ssl/certs/ca-certificates.crt
1434
1435 # uwaterloo (friendly address)
1436 account uwaterloo-friendly : uwaterloo
1437 from amin.bandali@uwaterloo.ca
1438
1439 # Set a default account
1440 account default : aminb
1441 #+end_src
1442
1443 ** ncmpcpp
1444
1445 *** config
1446 :PROPERTIES:
1447 :header-args+: :tangle ~/.ncmpcpp/config
1448 :END:
1449
1450 #+begin_src conf :tangle no
1451 ##############################################################
1452 ## This is the example configuration file. Copy it to       ##
1453 ## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
1454 ## and set up your preferences.                             ##
1455 ##############################################################
1456 #
1457 ##### directories ######
1458 ##
1459 ## Directory for storing ncmpcpp related files.
1460 ## Changing it is useful if you want to store
1461 ## everything somewhere else and provide command
1462 ## line setting for alternative location to config
1463 ## file which defines that while launching ncmpcpp.
1464 ##
1465 #
1466 ncmpcpp_directory = ~/.ncmpcpp
1467 #
1468 ##
1469 ## Directory for storing downloaded lyrics. It
1470 ## defaults to ~/.lyrics since other MPD clients
1471 ## (eg. ncmpc) also use that location.
1472 ##
1473 #
1474 #lyrics_directory = ~/.lyrics
1475 #
1476 ##### connection settings #####
1477 #
1478 #mpd_host = localhost
1479 #
1480 #mpd_port = 6600
1481 #
1482 #mpd_connection_timeout = 5
1483 #
1484 ## Needed for tag editor and file operations to work.
1485 ##
1486 mpd_music_dir = ~/usr/music
1487 #
1488 #mpd_crossfade_time = 5
1489 #
1490 ##### music visualizer #####
1491 ##
1492 ## Note: In order to make music visualizer work you'll
1493 ## need to use mpd fifo output, whose format parameter
1494 ## has to be set to 44100:16:1 for mono visualization
1495 ## or 44100:16:2 for stereo visualization. Example
1496 ## configuration (it has to be put into mpd.conf):
1497 ##
1498 ## audio_output {
1499 ##        type            "fifo"
1500 ##        name            "Visualizer feed"
1501 ##        path            "/tmp/mpd.fifo"
1502 ##        format          "44100:16:2"
1503 ## }
1504 ##
1505 #
1506 visualizer_fifo_path = /tmp/mpd.fifo
1507 #
1508 ##
1509 ## Note: Below parameter is needed for ncmpcpp
1510 ## to determine which output provides data for
1511 ## visualizer and thus allow syncing between
1512 ## visualization and sound as currently there
1513 ## are some problems with it.
1514 ##
1515 #
1516 visualizer_output_name = my fifo
1517 #
1518 ##
1519 ## If you set format to 44100:16:2, make it 'yes'.
1520 ##
1521 visualizer_in_stereo = yes
1522 #
1523 ##
1524 ## Multiply received samples by given value. Very
1525 ## useful for proper visualization of quiet music.
1526 ##
1527 #visualizer_sample_multiplier = 1
1528 #
1529 ##
1530 ## Note: Below parameter defines how often ncmpcpp
1531 ## has to "synchronize" visualizer and audio outputs.
1532 ## 30 seconds is optimal value, but if you experience
1533 ## synchronization problems, set it to lower value.
1534 ## Keep in mind that sane values start with >=10.
1535 ##
1536 #
1537 visualizer_sync_interval = 30
1538 #
1539 ##
1540 ## Note: To enable spectrum frequency visualization
1541 ## you need to compile ncmpcpp with fftw3 support.
1542 ##
1543 #
1544 ## Available values: spectrum, wave, wave_filled, ellipse.
1545 ##
1546 visualizer_type = spectrum
1547 #
1548 #visualizer_look = ●▮
1549 visualizer_look = "●•"
1550 #
1551 #visualizer_color = blue, cyan, green, yellow, magenta, red
1552 #
1553 ## Alternative subset of 256 colors for terminals that support it.
1554 ##
1555 #visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
1556 #
1557 ##### system encoding #####
1558 ##
1559 ## ncmpcpp should detect your charset encoding
1560 ## but if it failed to do so, you can specify
1561 ## charset encoding you are using here.
1562 ##
1563 ## Note: You can see whether your ncmpcpp build
1564 ## supports charset detection by checking output
1565 ## of `ncmpcpp --version`.
1566 ##
1567 ## Note: Since MPD uses UTF-8 by default, setting
1568 ## this option makes sense only if your encoding
1569 ## is different.
1570 ##
1571 #
1572 #system_encoding = ""
1573 #
1574 ##### delays #####
1575 #
1576 ## Time of inactivity (in seconds) after playlist
1577 ## highlighting will be disabled (0 = always on).
1578 ##
1579 #playlist_disable_highlight_delay = 5
1580 #
1581 ## Defines how long messages are supposed to be visible.
1582 ##
1583 #message_delay_time = 5
1584 #
1585 ##### song format #####
1586 ##
1587 ## For a song format you can use:
1588 ##
1589 ## %l - length
1590 ## %f - filename
1591 ## %D - directory
1592 ## %a - artist
1593 ## %A - album artist
1594 ## %t - title
1595 ## %b - album
1596 ## %y - date
1597 ## %n - track number (01/12 -> 01)
1598 ## %N - full track info (01/12 -> 01/12)
1599 ## %g - genre
1600 ## %c - composer
1601 ## %p - performer
1602 ## %d - disc
1603 ## %C - comment
1604 ## %P - priority
1605 ## $R - begin right alignment
1606 ##
1607 ## If you want to make sure that a part of the format is displayed
1608 ## only when certain tags are present, you can archieve it by
1609 ## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
1610 ## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
1611 ## It is also possible to define a list of alternatives by providing
1612 ## several groups and separating them with '|', e.g. '{%t}|{%f}'
1613 ## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
1614 ## present.
1615 ##
1616 ## Note: If you want to set limit on maximal length of a tag, just
1617 ## put the appropriate number between % and character that defines
1618 ## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
1619 ##
1620 ## In addition, formats support markers used for text attributes.
1621 ## They are followed by character '$'. After that you can put:
1622 ##
1623 ## - 0 - default window color (discards all other colors)
1624 ## - 1 - black
1625 ## - 2 - red
1626 ## - 3 - green
1627 ## - 4 - yellow
1628 ## - 5 - blue
1629 ## - 6 - magenta
1630 ## - 7 - cyan
1631 ## - 8 - white
1632 ## - 9 - end of current color
1633 ## - b - bold text
1634 ## - u - underline text
1635 ## - r - reverse colors
1636 ## - a - use alternative character set
1637 ##
1638 ## If you don't want to use a non-color attribute anymore, just put it
1639 ## again, but this time insert character '/' between '$' and attribute
1640 ## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
1641 ## or filename with reversed colors.
1642 ##
1643 ## If you want to use 256 colors and/or background colors in formats
1644 ## (the naming scheme is described below in section about color
1645 ## definitions), it can be done with the syntax $(COLOR), e.g. to set
1646 ## the artist tag to one of the non-standard colors and make it have
1647 ## yellow background, you need to write $(197_yellow)%a$(end). Note
1648 ## that for standard colors this is interchangable with attributes
1649 ## listed above.
1650 ##
1651 ## Note: colors can be nested.
1652 ##
1653 #
1654 #song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
1655 #
1656 #song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
1657 #
1658 #song_library_format = {%n - }{%t}|{%f}
1659 #
1660 #
1661 #alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
1662 #
1663 #alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
1664 #
1665 #now_playing_prefix = $b
1666 #
1667 #now_playing_suffix = $/b
1668 #
1669 #browser_playlist_prefix = "$2playlist$9 "
1670 #
1671 #selected_item_prefix = $6
1672 #
1673 #selected_item_suffix = $9
1674 #
1675 #modified_item_prefix = $3> $9
1676 #
1677 ##
1678 ## Note: attributes are not supported for the following variables.
1679 ##
1680 #song_window_title_format = {%a - }{%t}|{%f}
1681 ##
1682 ## Note: Below variables are used for sorting songs in browser.
1683 ## The sort mode determines how songs are sorted, and can be used
1684 ## in combination with a sort format to specify a custom sorting format.
1685 ## Available values for browser_sort_mode are "name", "mtime", "format"
1686 ## and "noop".
1687 ##
1688 #
1689 #browser_sort_mode = name
1690 #
1691 #browser_sort_format = {%a - }{%t}|{%f} {(%l)}
1692 #
1693 ##### columns settings #####
1694 ##
1695 ## syntax of song columns list format is "column column etc."
1696 ##
1697 ## - syntax for each column is:
1698 ##
1699 ## (width of the column)[color of the column]{displayed tag}
1700 ##
1701 ## Note: Width is by default in %, if you want a column to
1702 ## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
1703 ## will be the column that take 10% of screen (so the real width
1704 ## will depend on actual screen size), whereas (10f)[white]{a}
1705 ## will take 10 terminal cells, no matter how wide the screen is.
1706 ##
1707 ## - color is optional (if you want the default one,
1708 ##   leave the field empty).
1709 ##
1710 ## Note: You can give a column additional attributes by putting appropriate
1711 ## character after displayed tag character. Available attributes are:
1712 ##
1713 ## - r - column will be right aligned
1714 ## - E - if tag is empty, empty tag marker won't be displayed
1715 ##
1716 ## You can also:
1717 ##
1718 ## - give a column custom name by putting it after attributes,
1719 ##   separated with character ':', e.g. {lr:Length} gives you
1720 ##   right aligned column of lengths named "Length".
1721 ##
1722 ## - define sequence of tags, that have to be displayed in case
1723 ##   predecessor is empty in a way similar to the one in classic
1724 ##   song format, i.e. using '|' character, e.g. {a|c|p:Owner}
1725 ##   creates column named "Owner" that tries to display artist
1726 ##   tag and then composer and performer if previous ones are
1727 ##   not available.
1728 ##
1729 #
1730 #song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
1731 #
1732 ##### various settings #####
1733 #
1734 ##
1735 ## Note: Custom command that will be executed each
1736 ## time song changes. Useful for notifications etc.
1737 ##
1738 #execute_on_song_change = ""
1739 #
1740 #playlist_show_mpd_host = no
1741 #
1742 #playlist_show_remaining_time = no
1743 #
1744 #playlist_shorten_total_times = no
1745 #
1746 #playlist_separate_albums = no
1747 #
1748 ##
1749 ## Note: Possible display modes: classic, columns.
1750 ##
1751 #playlist_display_mode = columns
1752 #
1753 #browser_display_mode = classic
1754 #
1755 #search_engine_display_mode = classic
1756 #
1757 #playlist_editor_display_mode = classic
1758 #
1759 #discard_colors_if_item_is_selected = yes
1760 #
1761 #incremental_seeking = yes
1762 #
1763 #seek_time = 1
1764 #
1765 #volume_change_step = 2
1766 #
1767 #autocenter_mode = no
1768 #
1769 #centered_cursor = no
1770 #
1771 ##
1772 ## Note: You can specify third character which will
1773 ## be used to build 'empty' part of progressbar.
1774 ##
1775 #progressbar_look = =>
1776 progressbar_look = "─╼╶"
1777 #progressbar_look = "─⊙╶"
1778 #
1779 #progressbar_boldness = yes
1780 #
1781 ## Available values: database, playlist.
1782 ##
1783 #default_place_to_search_in = database
1784 #
1785 ## Available values: classic, alternative.
1786 ##
1787 #user_interface = classic
1788 #
1789 #data_fetching_delay = yes
1790 #
1791 ## Available values: artist, album_artist, date, genre, composer, performer.
1792 ##
1793 #media_library_primary_tag = artist
1794 #
1795 ## Available values: wrapped, normal.
1796 ##
1797 #default_find_mode = wrapped
1798 #
1799 #default_tag_editor_pattern = %n - %t
1800 #
1801 #header_visibility = yes
1802 #
1803 #statusbar_visibility = yes
1804 #
1805 #titles_visibility = yes
1806 #
1807 #header_text_scrolling = yes
1808 #
1809 #cyclic_scrolling = no
1810 #
1811 #lines_scrolled = 2
1812 #
1813 #follow_now_playing_lyrics = no
1814 #
1815 #fetch_lyrics_for_current_song_in_background = no
1816 #
1817 #store_lyrics_in_song_dir = no
1818 #
1819 #generate_win32_compatible_filenames = yes
1820 #
1821 #allow_for_physical_item_deletion = no
1822 #
1823 ##
1824 ## Note: If you set this variable, ncmpcpp will try to
1825 ## get info from last.fm in language you set and if it
1826 ## fails, it will fall back to english. Otherwise it will
1827 ## use english the first time.
1828 ##
1829 ## Note: Language has to be expressed as an ISO 639 alpha-2 code.
1830 ##
1831 #lastfm_preferred_language = en
1832 #
1833 #show_hidden_files_in_local_browser = no
1834 #
1835 ##
1836 ## How shall screen switcher work?
1837 ##
1838 ## - "previous" - switch between the current and previous screen.
1839 ## - "screen1,...,screenN" - switch between given sequence of screens.
1840 ##
1841 ## Screens available for use: help, playlist, browser, search_engine,
1842 ## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
1843 ##
1844 #screen_switcher_mode = playlist, browser
1845 #
1846 ##
1847 ## Note: You can define startup screen
1848 ## by choosing screen from the list above.
1849 ##
1850 #startup_screen = playlist
1851 #
1852 ##
1853 ## Note: You can define startup slave screen
1854 ## by choosing screen from the list above or
1855 ## an empty value for no slave screen.
1856 ##
1857 #startup_slave_screen = ""
1858 #
1859 #startup_slave_screen_focus = no
1860 #
1861 ##
1862 ## Default width of locked screen (in %).
1863 ## Acceptable values are from 20 to 80.
1864 ##
1865 #
1866 #locked_screen_width_part = 50
1867 #
1868 #ask_for_locked_screen_width_part = yes
1869 #
1870 #jump_to_now_playing_song_at_start = yes
1871 #
1872 #ask_before_clearing_playlists = yes
1873 #
1874 #clock_display_seconds = no
1875 #
1876 #display_volume_level = yes
1877 #
1878 #display_bitrate = no
1879 #
1880 #display_remaining_time = no
1881 #
1882 ## Available values: none, basic, extended, perl.
1883 ##
1884 #regular_expressions = perl
1885 #
1886 ##
1887 ## Note: If below is enabled, ncmpcpp will ignore leading
1888 ## "The" word while sorting items in browser, tags in
1889 ## media library, etc.
1890 ##
1891 #ignore_leading_the = no
1892 #
1893 #block_search_constraints_change_if_items_found = yes
1894 #
1895 #mouse_support = yes
1896 #
1897 #mouse_list_scroll_whole_page = yes
1898 #
1899 #empty_tag_marker = <empty>
1900 #
1901 #tags_separator = " | "
1902 #
1903 #tag_editor_extended_numeration = no
1904 #
1905 #media_library_sort_by_mtime = no
1906 #
1907 #enable_window_title = yes
1908 #
1909 ##
1910 ## Note: You can choose default search mode for search
1911 ## engine. Available modes are:
1912 ##
1913 ## - 1 - use mpd built-in searching (no regexes, pattern matching)
1914 ## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
1915 ##       but if your mpd is on a remote machine, downloading big database
1916 ##       to process it can take a while
1917 ## - 3 - match only exact values (this mode uses mpd function for searching
1918 ##       in database and local one for searching in current playlist)
1919 ##
1920 #
1921 #search_engine_default_search_mode = 1
1922 #
1923 #external_editor = nano
1924 #
1925 ## Note: set to yes if external editor is a console application.
1926 ##
1927 #use_console_editor = yes
1928 #
1929 ##### colors definitions #####
1930 ##
1931 ## It is possible to set a background color by setting a color
1932 ## value "<foreground>_<background>", e.g. red_black will set
1933 ## foregound color to red and background color to black.
1934 ##
1935 ## In addition, for terminals that support 256 colors it
1936 ## is possible to set one of them by using a number in range
1937 ## [1, 256] instead of color name, e.g. numerical value
1938 ## corresponding to red_black is 2_1. To find out if the
1939 ## terminal supports 256 colors, run ncmpcpp and check out
1940 ## the bottom of the help screen for list of available colors
1941 ## and their numerical values.
1942 ##
1943 ## Note: due to technical limitations of ncurses, if 256 colors
1944 ## are used, it is possible to either use only the colors with
1945 ## default background color, or all pairs from 1_1 up to 254_127,
1946 ## depending on the ncurses version used.
1947 ##
1948 #
1949 #colors_enabled = yes
1950 #
1951 #empty_tag_color = cyan
1952 #
1953 #header_window_color = default
1954 #
1955 #volume_color = default
1956 #
1957 #state_line_color = default
1958 #
1959 #state_flags_color = default
1960 #
1961 #main_window_color = yellow
1962 #
1963 #color1 = white
1964 #
1965 #color2 = green
1966 #
1967 #main_window_highlight_color = yellow
1968 #
1969 #progressbar_color = black
1970 #
1971 #progressbar_elapsed_color = green
1972 #
1973 #statusbar_color = default
1974 #
1975 #alternative_ui_separator_color = black
1976 #
1977 #active_column_color = red
1978 #
1979 #window_border_color = green
1980 #
1981 #active_window_border = red
1982 #
1983 #+end_src
1984
1985 *** bindings
1986 :PROPERTIES:
1987 :header-args+: :tangle ~/.ncmpcpp/bindings
1988 :END:
1989
1990 #+begin_src conf :tangle no
1991 def_key "j"
1992     scroll_down
1993 def_key "k"
1994     scroll_up
1995
1996 def_key "ctrl-u"
1997     page_up
1998 def_key "ctrl-d"
1999     page_down
2000
2001 def_key "h"
2002     previous_column
2003 def_key "l"
2004     next_column
2005
2006 def_key "."
2007     show_lyrics
2008
2009 def_key "n"
2010     next_found_item
2011 def_key "N"
2012     previous_found_item
2013
2014 def_key "J"
2015     move_sort_order_down
2016 def_key "K"
2017     move_sort_order_up
2018 #+end_src
2019
2020 ** notmuch
2021
2022 *** notmuch-config
2023 :PROPERTIES:
2024 :header-args+: :tangle ~/.notmuch-config
2025 :END:
2026
2027 #+begin_src conf
2028 # .notmuch-config - Configuration file for the notmuch mail system
2029 #
2030 # For more information about notmuch, see https://notmuchmail.org
2031
2032 # Database configuration
2033 #
2034 # The only value supported here is 'path' which should be the top-level
2035 # directory where your mail currently exists and to where mail will be
2036 # delivered in the future. Files should be individual email messages.
2037 # Notmuch will store its database within a sub-directory of the path
2038 # configured here named ".notmuch".
2039 #
2040 [database]
2041 path=/home/amin/mail
2042
2043 # User configuration
2044 #
2045 # Here is where you can let notmuch know how you would like to be
2046 # addressed. Valid settings are
2047 #
2048 #       name            Your full name.
2049 #       primary_email   Your primary email address.
2050 #       other_email     A list (separated by ';') of other email addresses
2051 #                       at which you receive email.
2052 #
2053 # Notmuch will use the various email addresses configured here when
2054 # formatting replies. It will avoid including your own addresses in the
2055 # recipient list of replies, and will set the From address based on the
2056 # address to which the original email was addressed.
2057 #
2058 [user]
2059 name=Amin Bandali
2060 primary_email=amin@aminb.org
2061 other_email=abandali@uwaterloo.ca;amin.bandali@uwaterloo.ca;aminb@gnu.org;
2062
2063 # Configuration for "notmuch new"
2064 #
2065 # The following options are supported here:
2066 #
2067 #       tags    A list (separated by ';') of the tags that will be
2068 #               added to all messages incorporated by "notmuch new".
2069 #
2070 #       ignore  A list (separated by ';') of file and directory names
2071 #               that will not be searched for messages by "notmuch new".
2072 #
2073 #               NOTE: *Every* file/directory that goes by one of those
2074 #               names will be ignored, independent of its depth/location
2075 #               in the mail store.
2076 #
2077 [new]
2078 tags=new;
2079 #tags=unread;inbox;
2080 ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
2081
2082 # Search configuration
2083 #
2084 # The following option is supported here:
2085 #
2086 #       exclude_tags
2087 #               A ;-separated list of tags that will be excluded from
2088 #               search results by default.  Using an excluded tag in a
2089 #               query will override that exclusion.
2090 #
2091 [search]
2092 exclude_tags=deleted;spam;
2093
2094 # Maildir compatibility configuration
2095 #
2096 # The following option is supported here:
2097 #
2098 #       synchronize_flags      Valid values are true and false.
2099 #
2100 #       If true, then the following maildir flags (in message filenames)
2101 #       will be synchronized with the corresponding notmuch tags:
2102 #
2103 #               Flag    Tag
2104 #               ----    -------
2105 #               D       draft
2106 #               F       flagged
2107 #               P       passed
2108 #               R       replied
2109 #               S       unread (added when 'S' flag is not present)
2110 #
2111 #       The "notmuch new" command will notice flag changes in filenames
2112 #       and update tags, while the "notmuch tag" and "notmuch restore"
2113 #       commands will notice tag changes and update flags in filenames
2114 #
2115 [maildir]
2116 synchronize_flags=true
2117
2118 # Cryptography related configuration
2119 #
2120 # The following option is supported here:
2121 #
2122 #       gpg_path
2123 #               binary name or full path to invoke gpg.
2124 #
2125 [crypto]
2126 gpg_path=gpg
2127 #+end_src
2128
2129 *** pre-new hook
2130 :PROPERTIES:
2131 :header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
2132 :END:
2133
2134 #+begin_src sh
2135 touch /tmp/gnusieve.log
2136 sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
2137              -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
2138 #+end_src
2139
2140 *** post-new hook
2141 :PROPERTIES:
2142 :header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
2143 :END:
2144
2145 #+begin_src sh
2146 # apply sent tag to messages sent by me
2147 notmuch tag -new +sent -- from:amin@aminb.org or from:aminb@gnu.org or from:abandali@uwaterloo.ca or from:amin.bandali@uwaterloo.ca
2148
2149 # initial tagging
2150 notmuch tag -latest -- tag:latest
2151 notmuch tag +inbox +unread +latest -new -- tag:new
2152
2153
2154 # apply tags to lists
2155
2156 # <aminb>
2157 notmuch tag -inbox +lists/~sircmpwn/srht-admins   -- folder:amin/lists/~sircmpwn/srht-admins
2158 notmuch tag -inbox +lists/~sircmpwn/srht-announce -- folder:amin/lists/~sircmpwn/srht-announce
2159 notmuch tag -inbox +lists/~sircmpwn/srht-dev      -- folder:amin/lists/~sircmpwn/srht-dev
2160 notmuch tag -inbox +lists/~sircmpwn/srht-discuss  -- folder:amin/lists/~sircmpwn/srht-discuss
2161
2162 notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
2163 notmuch tag -inbox +lists/haskell-weekly   -- folder:amin/lists/haskell-weekly
2164
2165 notmuch tag -inbox +pay -- folder:amin/pay
2166 # </aminb>
2167
2168 # <uw>
2169 notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
2170 notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
2171
2172 notmuch tag -inbox +lists/clvsingle        -- folder:uwaterloo/lists/Clvsingle
2173 notmuch tag -inbox +lists/gsa              -- folder:uwaterloo/lists/GSA
2174 notmuch tag -inbox +lists/math-grad        -- folder:uwaterloo/lists/Math-grad
2175 notmuch tag -inbox +lists/scs-grads        -- folder:uwaterloo/lists/scs-grads
2176 notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
2177 # </uw>
2178
2179 # <gnu>
2180 notmuch tag -inbox +lists/emacs-devel       -- folder:gnu/l/emacs-devel
2181 notmuch tag -inbox +lists/emacs-orgmode     -- folder:gnu/l/emacs-orgmode
2182 notmuch tag -inbox +lists/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
2183 notmuch tag -inbox +lists/fencepost-users   -- folder:gnu/l/fencepost-users
2184 notmuch tag -inbox +lists/guix-devel        -- folder:gnu/l/guix-devel
2185 notmuch tag -inbox +lists/guile-devel       -- folder:gnu/l/guile-devel
2186 notmuch tag -inbox +lists/help-gnu-emacs    -- folder:gnu/l/help-gnu-emacs
2187 notmuch tag -inbox +lists/info-gnu-emacs    -- folder:gnu/l/info-gnu-emacs
2188 notmuch tag -inbox +lists/www-commits       -- folder:gnu/l/www-commits
2189 notmuch tag -inbox +lists/www-discuss       -- folder:gnu/l/www-discuss
2190 notmuch tag -inbox +webmasters              -- folder:gnu/webmasters
2191
2192 notmuch tag -inbox +lists/deepspec          -- folder:gnu/l/deepspec
2193 notmuch tag -inbox +lists/haskell-cafe      -- folder:gnu/l/haskell-cafe
2194 notmuch tag -inbox +lists/haskell-art       -- folder:gnu/l/haskell-art
2195 notmuch tag -inbox +lists/notmuch           -- folder:gnu/l/notmuch
2196 # </gnu>
2197
2198 notmuch tag -inbox -unread +archive/notmuch     -- path:archive/notmuch/**
2199 notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**
2200 #+end_src
2201
2202 *** notmuch.service
2203 :PROPERTIES:
2204 :header-args+: :tangle ~/.config/systemd/user/notmuch.service
2205 :END:
2206
2207 #+begin_src conf :tangle no
2208 [Unit]
2209 Description=notmuch service
2210
2211 [Service]
2212 Type=oneshot
2213 ExecStart=/usr/bin/notmuch new
2214 StandardOutput=syslog
2215 StandardError=syslog
2216 #+end_src
2217
2218 *** notmuch.timer
2219 :PROPERTIES:
2220 :header-args+: :tangle ~/.config/systemd/user/notmuch.timer
2221 :END:
2222
2223 #+begin_src conf :tangle no
2224 [Unit]
2225 Description=notmuch timer
2226
2227 [Timer]
2228 OnCalendar=*:0/5
2229 Persistent=true
2230 Unit=notmuch.service
2231
2232 [Install]
2233 WantedBy=timers.target
2234 #+end_src
2235
2236 ** offlineimap
2237
2238 *** offlineimaprc
2239 :PROPERTIES:
2240 :header-args+: :tangle ~/.offlineimaprc
2241 :END:
2242
2243 #+begin_src conf :tangle no
2244 [general]
2245 pythonfile = ~/.offlineimap.py
2246 accounts = Gmail, aminb
2247 maxsyncaccounts = 3
2248
2249 [Account Gmail]
2250 localrepository = GmailL
2251 remoterepository = GmailR
2252
2253 [Account aminb]
2254 localrepository = aminbL
2255 remoterepository = aminbR
2256
2257 [Repository GmailL]
2258 type = Maildir
2259 localfolders = ~/Maildir/Gmail
2260
2261 [Repository GmailR]
2262 type = IMAP
2263 remotehost = imap.gmail.com
2264 remoteusereval = mailuser("gmail")
2265 remotepasseval = mailpasswd("gmail")
2266 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2267 ssl = yes
2268 folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
2269 maxconnections = 1
2270 realdelete = no
2271
2272 [Repository aminbL]
2273 type = Maildir
2274 localfolders = ~/Maildir/aminb
2275
2276 [Repository aminbR]
2277 type = IMAP
2278 remotehost = mail.aminb.org
2279 remoteusereval = mailuser("aminb")
2280 remotepasseval = mailpasswd("aminb")
2281 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2282 ssl = yes
2283 folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
2284 maxconnections = 1
2285 realdelete = no
2286 #+end_src
2287
2288 *** offlineimap.py
2289 :PROPERTIES:
2290 :header-args+: :tangle ~/.offlineimap.py
2291 :END:
2292
2293 #+begin_src python :tangle no
2294 import os
2295 import subprocess
2296
2297 def mailpasswd(acct):
2298     acct = os.path.basename(acct)
2299     path = "/home/amin/.passwd/%s.gpg" % acct
2300     args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
2301     try:
2302         return subprocess.check_output(args).strip()
2303     except subprocess.CalledProcessError:
2304         return ""
2305
2306 def mailuser(acct):
2307     acct = os.path.basename(acct)
2308     path = "/home/amin/.passwd/%s" % acct
2309     args = ["cat", path]
2310     try:
2311         return subprocess.check_output(args).strip()
2312     except subprocess.CalledProcessError:
2313         return ""
2314
2315 def prime_gpg_agent():
2316   ret = False
2317   i = 1
2318   while not ret:
2319     ret = (mailpasswd("prime") == "prime")
2320     if i > 2:
2321       from offlineimap.ui import getglobalui
2322       sys.stderr.write("Error reading in passwords. Terminating.\n")
2323       getglobalui().terminate()
2324     i += 1
2325   return ret
2326
2327 prime_gpg_agent()
2328 #+end_src
2329
2330 ** pigeonhole
2331 *** gnu.sieve
2332 :PROPERTIES:
2333 :header-args+: :tangle ~/sieve/gnu.sieve :comments none
2334 :END:
2335
2336 #+begin_src conf
2337 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags", "include" ];
2338
2339 if anyof (
2340   address :is "from" "webmasters@gnu.org",
2341   address :is "from" "webmasters-comment@gnu.org") {
2342   fileinto :create "webmasters";
2343   stop;
2344 }
2345
2346 include :personal "lists";
2347 #+end_src
2348
2349 *** lists.sieve
2350 :PROPERTIES:
2351 :header-args+: :tangle ~/sieve/lists.sieve :comments none
2352 :END:
2353
2354 #+begin_src conf
2355 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags",
2356  "include" ];
2357
2358 if anyof (
2359     header :contains "list-id" "<emacs-devel.gnu.org>",
2360     header :contains "list-id" "<emacs-orgmode.gnu.org>",
2361     header :contains "list-id" "<emacsconf-discuss.gnu.org>",
2362     header :contains "list-id" "<fencepost-users.gnu.org>",
2363     header :contains "list-id" "<guix-devel.gnu.org>",
2364     header :contains "list-id" "<guile-devel.gnu.org>",
2365     header :contains "list-id" "<help-gnu-emacs.gnu.org>",
2366     header :contains "list-id" "<info-gnu-emacs.gnu.org>",
2367     header :contains "list-id" "<www-commits.gnu.org>",
2368     header :contains "list-id" "<www-discuss.gnu.org>",
2369     header :contains "list-id" "<deepspec.lists.cs.princeton.edu>",
2370     header :contains "list-id" "<haskell-cafe.haskell.org>",
2371     header :contains "list-id" "<haskell-art.we.lurk.org>",
2372     header :contains "list-id" "<notmuch.notmuchmail.org>") {
2373     if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
2374         set :lower "listname" "${1}";
2375         fileinto :create "l/${listname}";
2376     }
2377 }
2378 #+end_src
2379
2380 ** polybar
2381
2382 *** config
2383 :PROPERTIES:
2384 :header-args+: :tangle ~/.config/polybar/config
2385 :END:
2386
2387 #+begin_src conf :tangle no
2388 ;=====================================================
2389 ;
2390 ;   To learn more about how to configure Polybar
2391 ;   go to https://github.com/jaagr/polybar
2392 ;
2393 ;   The README contains alot of information
2394 ;
2395 ;=====================================================
2396
2397 [colors]
2398 ;background = ${xrdb:color0:#222}
2399 background = #222
2400 background-alt = #444
2401 ;foreground = ${xrdb:color7:#222}
2402 foreground = #eee
2403 foreground-alt = #888
2404 primary = #ffb52a
2405 secondary = #e60053
2406 alert = #bd2c40
2407
2408 [bar/main]
2409 ;monitor = ${env:MONITOR:HDMI-1}
2410 width = 100%
2411 height = 27
2412 ;offset-x = 1%
2413 ;offset-y = 1%
2414 radius = 3.0
2415 fixed-center = true
2416
2417 background = ${colors.background}
2418 foreground = ${colors.foreground}
2419
2420 line-size = 3
2421 line-color = #f00
2422
2423 border-size = 4
2424 border-color = #00000000
2425
2426 padding-left = 0
2427 padding-right = 2
2428
2429 module-margin-left = 2
2430 module-margin-right = 2
2431
2432 font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
2433 font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
2434 font-2 = Wuncon Siji:pixelsize=10;1
2435 font-3 = FontAwesome:pixelsize=10;1
2436
2437 modules-left = bspwm xwindow
2438 modules-center =
2439 modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
2440
2441 tray-position = right
2442 tray-padding = 1
2443 ;tray-transparent = true
2444 ;tray-background = #0063ff
2445 tray-maxsize = 18
2446
2447 wm-restack = bspwm
2448
2449 ;override-redirect = true
2450
2451 scroll-up = bspwm-desknext
2452 scroll-down = bspwm-deskprev
2453
2454 [module/xwindow]
2455 type = internal/xwindow
2456 label = %title:0:50:...%
2457
2458 [module/xkeyboard]
2459 type = internal/xkeyboard
2460 blacklist-0 = num lock
2461
2462 format-prefix = " "
2463 format-prefix-foreground = ${colors.foreground-alt}
2464 format-prefix-underline = ${colors.secondary}
2465
2466 label-layout = %layout%
2467 label-layout-underline = ${colors.secondary}
2468
2469 label-indicator-padding = 2
2470 label-indicator-margin = 1
2471 label-indicator-background = ${colors.secondary}
2472 label-indicator-underline = ${colors.secondary}
2473
2474 [module/filesystem]
2475 type = internal/fs
2476 interval = 25
2477
2478 mount-0 = /
2479
2480 label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
2481 label-unmounted = %mountpoint% not mounted
2482 label-unmounted-foreground = ${colors.foreground-alt}
2483
2484 [module/bspwm]
2485 type = internal/bspwm
2486
2487 label-focused = %index%
2488 label-focused-background = ${colors.background-alt}
2489 label-focused-underline= ${colors.primary}
2490 label-focused-padding = 2
2491
2492 label-occupied = %index%
2493 label-occupied-padding = 2
2494
2495 label-urgent = %index%!
2496 label-urgent-background = ${colors.alert}
2497 label-urgent-padding = 2
2498
2499 label-empty = %index%
2500 label-empty-foreground = ${colors.foreground-alt}
2501 label-empty-padding = 2
2502
2503 [module/i3]
2504 type = internal/i3
2505 format = <label-state> <label-mode>
2506 index-sort = true
2507 wrapping-scroll = false
2508
2509 ; Only show workspaces on the same output as the bar
2510 ;pin-workspaces = true
2511
2512 label-mode-padding = 2
2513 label-mode-foreground = #000
2514 label-mode-background = ${colors.primary}
2515
2516 ; focused = Active workspace on focused monitor
2517 label-focused = %index%
2518 label-focused-background = ${module/bspwm.label-focused-background}
2519 label-focused-underline = ${module/bspwm.label-focused-underline}
2520 label-focused-padding = ${module/bspwm.label-focused-padding}
2521
2522 ; unfocused = Inactive workspace on any monitor
2523 label-unfocused = %index%
2524 label-unfocused-padding = ${module/bspwm.label-occupied-padding}
2525
2526 ; visible = Active workspace on unfocused monitor
2527 label-visible = %index%
2528 label-visible-background = ${self.label-focused-background}
2529 label-visible-underline = ${self.label-focused-underline}
2530 label-visible-padding = ${self.label-focused-padding}
2531
2532 ; urgent = Workspace with urgency hint set
2533 label-urgent = %index%
2534 label-urgent-background = ${module/bspwm.label-urgent-background}
2535 label-urgent-padding = ${module/bspwm.label-urgent-padding}
2536
2537 [module/mpd]
2538 type = internal/mpd
2539 format-online = <label-song>  <icon-prev> <icon-stop> <toggle> <icon-next>
2540
2541 icon-prev = 
2542 icon-stop = 
2543 icon-play = 
2544 icon-pause = 
2545 icon-next = 
2546
2547 label-song-maxlen = 25
2548 label-song-ellipsis = true
2549
2550 [module/xbacklight]
2551 type = internal/xbacklight
2552
2553 format = <label> <bar>
2554 label = BL
2555
2556 bar-width = 10
2557 bar-indicator = |
2558 bar-indicator-foreground = #ff
2559 bar-indicator-font = 2
2560 bar-fill = ─
2561 bar-fill-font = 2
2562 bar-fill-foreground = #9f78e1
2563 bar-empty = ─
2564 bar-empty-font = 2
2565 bar-empty-foreground = ${colors.foreground-alt}
2566
2567 [module/backlight-acpi]
2568 inherit = module/xbacklight
2569 type = internal/backlight
2570 ;card = intel_backlight
2571 card = mba6x_backlight
2572
2573 [module/cpu]
2574 type = internal/cpu
2575 interval = 2
2576 format-prefix = " "
2577 format-prefix-foreground = ${colors.foreground-alt}
2578 format-underline = #f90000
2579 label = %percentage%%
2580
2581 [module/memory]
2582 type = internal/memory
2583 interval = 2
2584 format-prefix = " "
2585 format-prefix-foreground = ${colors.foreground-alt}
2586 format-underline = #4bffdc
2587 label = %percentage_used%%
2588
2589 [module/wlan]
2590 type = internal/network
2591 interface =
2592 interval = 3.0
2593
2594 format-connected = <ramp-signal> <label-connected>
2595 format-connected-underline = #9f78e1
2596 label-connected = %essid%
2597
2598 format-disconnected =
2599 ;format-disconnected = <label-disconnected>
2600 ;format-disconnected-underline = ${self.format-connected-underline}
2601 ;label-disconnected = %ifname% disconnected
2602 ;label-disconnected-foreground = ${colors.foreground-alt}
2603
2604 ramp-signal-0 = 
2605 ramp-signal-1 = 
2606 ramp-signal-2 = 
2607 ramp-signal-3 = 
2608 ramp-signal-4 = 
2609 ramp-signal-foreground = ${colors.foreground-alt}
2610
2611 [module/eth]
2612 type = internal/network
2613 interface =
2614 interval = 3.0
2615
2616 format-connected-underline = #55aa55
2617 format-connected-prefix = " "
2618 format-connected-prefix-foreground = ${colors.foreground-alt}
2619 label-connected = %local_ip%
2620
2621 format-disconnected =
2622 ;format-disconnected = <label-disconnected>
2623 ;format-disconnected-underline = ${self.format-connected-underline}
2624 ;label-disconnected = %ifname% disconnected
2625 ;label-disconnected-foreground = ${colors.foreground-alt}
2626
2627 [module/date]
2628 type = internal/date
2629 interval = 5
2630
2631 date =
2632 date-alt = " %Y-%m-%d"
2633
2634 time = %H:%M
2635 time-alt = %H:%M:%S
2636
2637 format-prefix = 
2638 format-prefix-foreground = ${colors.foreground-alt}
2639 format-underline = #0a6cf5
2640
2641 label = %date% %time%
2642
2643 [module/volume]
2644 type = internal/volume
2645
2646 format-volume = <label-volume> <bar-volume>
2647 label-volume = vol
2648 label-volume-foreground = ${root.foreground}
2649
2650 format-muted-prefix = " "
2651 format-muted-foreground = ${colors.foreground-alt}
2652 label-muted = mute
2653
2654 bar-volume-width = 10
2655 bar-volume-foreground-0 = #55aa55
2656 bar-volume-foreground-1 = #55aa55
2657 bar-volume-foreground-2 = #55aa55
2658 bar-volume-foreground-3 = #55aa55
2659 bar-volume-foreground-4 = #55aa55
2660 bar-volume-foreground-5 = #f5a70a
2661 bar-volume-foreground-6 = #ff5555
2662 bar-volume-gradient = false
2663 bar-volume-indicator = |
2664 bar-volume-indicator-font = 2
2665 bar-volume-fill = ─
2666 bar-volume-fill-font = 2
2667 bar-volume-empty = ─
2668 bar-volume-empty-font = 2
2669 bar-volume-empty-foreground = ${colors.foreground-alt}
2670
2671 [module/battery]
2672 type = internal/battery
2673 battery = BAT0
2674 adapter = ADP1
2675 full-at = 64
2676
2677 format-charging = <animation-charging> <label-charging>
2678 format-charging-underline = #ffb52a
2679
2680 format-discharging = <ramp-capacity> <label-discharging>
2681 format-discharging-underline = ${self.format-charging-underline}
2682
2683 format-full-prefix = " "
2684 format-full-prefix-foreground = ${colors.foreground-alt}
2685 format-full-underline = ${self.format-charging-underline}
2686
2687 ramp-capacity-0 = 
2688 ramp-capacity-1 = 
2689 ramp-capacity-2 = 
2690 ramp-capacity-foreground = ${colors.foreground-alt}
2691
2692 animation-charging-0 = 
2693 animation-charging-1 = 
2694 animation-charging-2 = 
2695 animation-charging-foreground = ${colors.foreground-alt}
2696 animation-charging-framerate = 750
2697
2698 [module/temperature]
2699 type = internal/temperature
2700 thermal-zone = 1
2701 warn-temperature = 66
2702
2703 format = <ramp> <label>
2704 format-underline = #f50a4d
2705 format-warn = <ramp> <label-warn>
2706 format-warn-underline = ${self.format-underline}
2707
2708 label = %temperature%
2709 label-warn = %temperature%
2710 label-warn-foreground = ${colors.secondary}
2711
2712 ramp-0 = 
2713 ramp-1 = 
2714 ramp-2 = 
2715 ramp-foreground = ${colors.foreground-alt}
2716
2717 [module/powermenu]
2718 type = custom/menu
2719
2720 format-spacing = 1
2721
2722 label-open = 
2723 label-open-foreground = ${colors.secondary}
2724 label-close =  cancel
2725 label-close-foreground = ${colors.secondary}
2726 label-separator = |
2727 label-separator-foreground = ${colors.foreground-alt}
2728
2729 menu-0-0 = reboot
2730 menu-0-0-exec = menu-open-1
2731 menu-0-1 = power off
2732 menu-0-1-exec = menu-open-2
2733
2734 menu-1-0 = cancel
2735 menu-1-0-exec = menu-open-0
2736 menu-1-1 = reboot
2737 menu-1-1-exec = sudo reboot
2738
2739 menu-2-0 = power off
2740 menu-2-0-exec = sudo poweroff
2741 menu-2-1 = cancel
2742 menu-2-1-exec = menu-open-0
2743
2744 [module/mail]
2745 type = custom/script
2746 interval = 60
2747 format = <label>
2748 format-prefix = " "
2749 format-prefix-foreground = ${colors.foreground-alt}
2750 format-underline = #0a6cf5
2751 exec = notmuch count tag:unread
2752
2753 [settings]
2754 screenchange-reload = true
2755 ;compositing-background = xor
2756 ;compositing-background = screen
2757 ;compositing-foreground = source
2758 ;compositing-border = over
2759
2760 [global/wm]
2761 margin-top = 0
2762 margin-bottom = 0
2763
2764 ; vim:ft=dosini
2765 #+end_src
2766
2767 *** polybar-launch
2768 :PROPERTIES:
2769 :header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
2770 :END:
2771
2772 #+begin_src sh :tangle no
2773 # Terminate already running bar instances
2774 killall -q polybar
2775
2776 # Wait until the processes have been shut down
2777 while pgrep -x polybar >/dev/null; do sleep 1; done
2778
2779 # Launch main bar
2780 polybar main &
2781
2782 echo "Bars launched..."
2783 #+end_src
2784
2785 ** PowerTOP
2786 :PROPERTIES:
2787 :header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
2788 :END:
2789
2790 #+begin_src conf
2791 [Unit]
2792 Description=Powertop tunings
2793
2794 [Service]
2795 ExecStart=/usr/bin/powertop --auto-tune
2796 RemainAfterExit=true
2797
2798 [Install]
2799 WantedBy=multi-user.target
2800 #+end_src
2801
2802 ** ranger
2803
2804 *** rc.conf
2805 :PROPERTIES:
2806 :header-args+: :tangle ~/.config/ranger/rc.conf
2807 :END:
2808
2809 #+begin_src conf :tangle no
2810 # ===================================================================
2811 # This file contains the default startup commands for ranger.
2812 # To change them, it is recommended to create the file
2813 # ~/.config/ranger/rc.conf and add your custom commands there.
2814 #
2815 # If you copy this whole file there, you may want to set the environment
2816 # variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
2817 #
2818 # The purpose of this file is mainly to define keybindings and settings.
2819 # For running more complex python code, please create a plugin in "plugins/" or
2820 # a command in "commands.py".
2821 #
2822 # Each line is a command that will be run before the user interface
2823 # is initialized.  As a result, you can not use commands which rely
2824 # on the UI such as :delete or :mark.
2825 # ===================================================================
2826
2827 # ===================================================================
2828 # == Options
2829 # ===================================================================
2830
2831 # How many columns are there, and what are their relative widths?
2832 set column_ratios 1,3,4
2833
2834 # Which files should be hidden? (regular expression)
2835 set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
2836
2837 # Show hidden files? You can toggle this by typing 'zh'
2838 set show_hidden false
2839
2840 # Ask for a confirmation when running the "delete" command?
2841 # Valid values are "always" (default), "never", "multiple"
2842 # With "multiple", ranger will ask only if you delete multiple files at once.
2843 set confirm_on_delete multiple
2844
2845 # Which script is used to generate file previews?
2846 # ranger ships with scope.sh, a script that calls external programs (see
2847 # README for dependencies) to preview images, archives, etc.
2848 set preview_script ~/.config/ranger/scope.sh
2849
2850 # Use the external preview script or display simple plain text previews?
2851 set use_preview_script true
2852
2853 # Open all images in this directory when running certain image viewers
2854 # like feh or sxiv?  You can still open selected files by marking them.
2855 set open_all_images true
2856
2857 # Be aware of version control systems and display information.
2858 set vcs_aware false
2859
2860 # State of the three backends git, hg, bzr. The possible states are
2861 # disabled, local (only show local info), enabled (show local and remote
2862 # information).
2863 set vcs_backend_git enabled
2864 set vcs_backend_hg disabled
2865 set vcs_backend_bzr disabled
2866
2867 # Preview images in full color with the external command "w3mimgpreview"?
2868 # This requires the console web browser "w3m" and a supported terminal.
2869 # It has been successfully tested with "xterm" and "urxvt" without tmux.
2870 set preview_images true
2871
2872 # Use a unicode "..." character to mark cut-off filenames?
2873 set unicode_ellipsis false
2874
2875 # Show dotfiles in the bookmark preview box?
2876 set show_hidden_bookmarks true
2877
2878 # Which colorscheme to use?  These colorschemes are available by default:
2879 # default, jungle, snow
2880 set colorscheme default
2881
2882 # Preview files on the rightmost column?
2883 # And collapse (shrink) the last column if there is nothing to preview?
2884 set preview_files true
2885 set preview_directories true
2886 set collapse_preview true
2887
2888 # Save the console history on exit?
2889 set save_console_history true
2890
2891 # Draw the status bar on top of the browser window (default: bottom)
2892 set status_bar_on_top false
2893
2894 # Draw a progress bar in the status bar which displays the average state of all
2895 # currently running tasks which support progress bars?
2896 set draw_progress_bar_in_status_bar true
2897
2898 # Draw borders around columns?
2899 set draw_borders true
2900
2901 # Display the directory name in tabs?
2902 set dirname_in_tabs false
2903
2904 # Enable the mouse support?
2905 set mouse_enabled true
2906
2907 # Display the file size in the main column or status bar?
2908 set display_size_in_main_column true
2909 set display_size_in_status_bar true
2910
2911 # Display files tags in all columns or only in main column?
2912 set display_tags_in_all_columns true
2913
2914 # Set a title for the window?
2915 set update_title false
2916
2917 # Set the title to "ranger" in the tmux program?
2918 set update_tmux_title false
2919
2920 # Shorten the title if it gets long?  The number defines how many
2921 # directories are displayed at once, 0 turns off this feature.
2922 set shorten_title 3
2923
2924 # Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
2925 set tilde_in_titlebar false
2926
2927 # How many directory-changes or console-commands should be kept in history?
2928 set max_history_size 20
2929 set max_console_history_size 50
2930
2931 # Try to keep so much space between the top/bottom border when scrolling:
2932 set scroll_offset 8
2933
2934 # Flush the input after each key hit?  (Noticable when ranger lags)
2935 set flushinput true
2936
2937 # Padding on the right when there's no preview?
2938 # This allows you to click into the space to run the file.
2939 set padding_right true
2940
2941 # Save bookmarks (used with mX and `X) instantly?
2942 # This helps to synchronize bookmarks between multiple ranger
2943 # instances but leads to *slight* performance loss.
2944 # When false, bookmarks are saved when ranger is exited.
2945 set autosave_bookmarks true
2946
2947 # You can display the "real" cumulative size of directories by using the
2948 # command :get_cumulative_size or typing "dc".  The size is expensive to
2949 # calculate and will not be updated automatically.  You can choose
2950 # to update it automatically though by turning on this option:
2951 set autoupdate_cumulative_size false
2952
2953 # Turning this on makes sense for screen readers:
2954 set show_cursor false
2955
2956 # One of: size, basename, mtime, type
2957 set sort natural
2958
2959 # Additional sorting options
2960 set sort_reverse false
2961 set sort_case_insensitive true
2962 set sort_directories_first true
2963
2964 # Enable this if key combinations with the Alt Key don't work for you.
2965 # (Especially on xterm)
2966 set xterm_alt_key false
2967
2968 # ===================================================================
2969 # == Local Options
2970 # ===================================================================
2971 # You can set local options that only affect a single directory.
2972
2973 # Examples:
2974 # setlocal path=~/downloads sort mtime
2975
2976 # ===================================================================
2977 # == Command Aliases in the Console
2978 # ===================================================================
2979
2980 alias e    edit
2981 alias q    quit
2982 alias q!   quitall
2983 alias qall quitall
2984 alias setl setlocal
2985
2986 alias filter     scout -prt
2987 alias find       scout -aet
2988 alias mark       scout -mr
2989 alias unmark     scout -Mr
2990 alias search     scout -rs
2991 alias search_inc scout -rts
2992 alias travel     scout -aefiklst
2993
2994 # ===================================================================
2995 # == Define keys for the browser
2996 # ===================================================================
2997
2998 # Basic
2999 map     Q quit!
3000 map     q quit
3001 copymap q ZZ ZQ
3002
3003 map R     reload_cwd
3004 map <C-r> reset
3005 map <C-l> redraw_window
3006 map <C-c> abort
3007 map <esc> change_mode normal
3008
3009 map i display_file
3010 map ? help
3011 map W display_log
3012 map w taskview_open
3013 map S shell $SHELL
3014
3015 map :  console
3016 map ;  console
3017 map !  console shell
3018 map @  console -p6 shell  %%s
3019 map #  console shell -p
3020 map s  console shell
3021 map r  chain draw_possible_programs; console open_with
3022 map f  console find
3023 map cd console cd
3024
3025 # Tagging / Marking
3026 map t       tag_toggle
3027 map ut      tag_remove
3028 map "<any>  tag_toggle tag=%any
3029 map <Space> mark_files toggle=True
3030 map v       mark_files all=True toggle=True
3031 map uv      mark_files all=True val=False
3032 map V       toggle_visual_mode
3033 map uV      toggle_visual_mode reverse=True
3034
3035 # For the nostalgics: Midnight Commander bindings
3036 map <F1> help
3037 map <F3> display_file
3038 map <F4> edit
3039 map <F5> copy
3040 map <F6> cut
3041 map <F7> console mkdir
3042 map <F8> console delete
3043 map <F10> exit
3044
3045 # In case you work on a keyboard with dvorak layout
3046 map <UP>       move up=1
3047 map <DOWN>     move down=1
3048 map <LEFT>     move left=1
3049 map <RIGHT>    move right=1
3050 map <HOME>     move to=0
3051 map <END>      move to=-1
3052 map <PAGEDOWN> move down=1   pages=True
3053 map <PAGEUP>   move up=1     pages=True
3054 map <CR>       move right=1
3055 map <DELETE>   console delete
3056 map <INSERT>   console touch
3057
3058 # VIM-like
3059 copymap <UP>       k
3060 copymap <DOWN>     j
3061 copymap <LEFT>     h
3062 copymap <RIGHT>    l
3063 copymap <HOME>     gg
3064 copymap <END>      G
3065 copymap <PAGEDOWN> <C-F>
3066 copymap <PAGEUP>   <C-B>
3067
3068 map J  move down=0.5  pages=True
3069 map K  move up=0.5    pages=True
3070 copymap J <C-D>
3071 copymap K <C-U>
3072
3073 # Jumping around
3074 map H     history_go -1
3075 map L     history_go 1
3076 map ]     move_parent 1
3077 map [     move_parent -1
3078 map }     traverse
3079
3080 map gh cd ~
3081 map ge cd /etc
3082 map gu cd /usr
3083 map gd cd /dev
3084 map gl cd -r .
3085 map gL cd -r %f
3086 map go cd /opt
3087 map gv cd /var
3088 map gm cd /media
3089 map gM cd /mnt
3090 map gs cd /srv
3091 map gr cd /
3092 map gR eval fm.cd(ranger.RANGERDIR)
3093 map g/ cd /
3094 map g? cd /usr/share/doc/ranger
3095
3096 # External Programs
3097 map E  edit
3098 map du shell -p du --max-depth=1 -h --apparent-size
3099 map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
3100 map yp shell -d echo -n %d/%f | xsel -i
3101 map yd shell -d echo -n %d    | xsel -i
3102 map yn shell -d echo -n %f    | xsel -i
3103
3104 # Filesystem Operations
3105 map =  chmod
3106
3107 map cw console rename
3108 map A  eval fm.open_console('rename ' + fm.thisfile.basename)
3109 map I  eval fm.open_console('rename ' + fm.thisfile.basename, position=7)
3110
3111 map pp paste
3112 map po paste overwrite=True
3113 map pl paste_symlink relative=False
3114 map pL paste_symlink relative=True
3115 map phl paste_hardlink
3116 map pht paste_hardlinked_subtree
3117
3118 map dd cut
3119 map ud uncut
3120 map da cut mode=add
3121 map dr cut mode=remove
3122
3123 map yy copy
3124 map uy uncut
3125 map ya copy mode=add
3126 map yr copy mode=remove
3127
3128 # Temporary workarounds
3129 map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
3130 map dG  eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
3131 map dj  eval fm.cut(dirarg=dict(down=1), narg=quantifier)
3132 map dk  eval fm.cut(dirarg=dict(up=1), narg=quantifier)
3133 map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
3134 map yG  eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
3135 map yj  eval fm.copy(dirarg=dict(down=1), narg=quantifier)
3136 map yk  eval fm.copy(dirarg=dict(up=1), narg=quantifier)
3137
3138 # Searching
3139 map /  console search
3140 map n  search_next
3141 map N  search_next forward=False
3142 map ct search_next order=tag
3143 map cs search_next order=size
3144 map ci search_next order=mimetype
3145 map cc search_next order=ctime
3146 map cm search_next order=mtime
3147 map ca search_next order=atime
3148
3149 # Tabs
3150 map <C-n>     tab_new ~
3151 map <C-w>     tab_close
3152 map <TAB>     tab_move 1
3153 map <S-TAB>   tab_move -1
3154 map <A-Right> tab_move 1
3155 map <A-Left>  tab_move -1
3156 map gt        tab_move 1
3157 map gT        tab_move -1
3158 map gn        tab_new ~
3159 map gc        tab_close
3160 map uq        tab_restore
3161 map <a-1>     tab_open 1
3162 map <a-2>     tab_open 2
3163 map <a-3>     tab_open 3
3164 map <a-4>     tab_open 4
3165 map <a-5>     tab_open 5
3166 map <a-6>     tab_open 6
3167 map <a-7>     tab_open 7
3168 map <a-8>     tab_open 8
3169 map <a-9>     tab_open 9
3170
3171 # Sorting
3172 map or toggle_option sort_reverse
3173 map os chain set sort=size;      set sort_reverse=False
3174 map ob chain set sort=basename;  set sort_reverse=False
3175 map on chain set sort=natural;   set sort_reverse=False
3176 map om chain set sort=mtime;     set sort_reverse=False
3177 map oc chain set sort=ctime;     set sort_reverse=False
3178 map oa chain set sort=atime;     set sort_reverse=False
3179 map ot chain set sort=type;      set sort_reverse=False
3180
3181 map oS chain set sort=size;      set sort_reverse=True
3182 map oB chain set sort=basename;  set sort_reverse=True
3183 map oN chain set sort=natural;   set sort_reverse=True
3184 map oM chain set sort=mtime;     set sort_reverse=True
3185 map oC chain set sort=ctime;     set sort_reverse=True
3186 map oA chain set sort=atime;     set sort_reverse=True
3187 map oT chain set sort=type;      set sort_reverse=True
3188
3189 map dc get_cumulative_size
3190
3191 # Settings
3192 map zc    toggle_option collapse_preview
3193 map zd    toggle_option sort_directories_first
3194 map zh    toggle_option show_hidden
3195 map <C-h> toggle_option show_hidden
3196 map zi    toggle_option flushinput
3197 map zm    toggle_option mouse_enabled
3198 map zp    toggle_option preview_files
3199 map zP    toggle_option preview_directories
3200 map zs    toggle_option sort_case_insensitive
3201 map zu    toggle_option autoupdate_cumulative_size
3202 map zv    toggle_option use_preview_script
3203 map zf    console filter
3204
3205 # Bookmarks
3206 map `<any>  enter_bookmark %any
3207 map '<any>  enter_bookmark %any
3208 map m<any>  set_bookmark %any
3209 map um<any> unset_bookmark %any
3210
3211 map m<bg>   draw_bookmarks
3212 copymap m<bg>  um<bg> `<bg> '<bg>
3213
3214 # Generate all the chmod bindings with some python help:
3215 eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
3216 eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
3217 eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
3218 eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
3219 eval for arg in "rwxXst": cmd("map +{0}  shell -d chmod u+{0} %s".format(arg))
3220
3221 eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
3222 eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
3223 eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
3224 eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
3225 eval for arg in "rwxXst": cmd("map -{0}  shell -d chmod u-{0} %s".format(arg))
3226
3227 # ===================================================================
3228 # == Define keys for the console
3229 # ===================================================================
3230 # Note: Unmapped keys are passed directly to the console.
3231
3232 # Basic
3233 cmap <tab>   eval fm.ui.console.tab()
3234 cmap <s-tab> eval fm.ui.console.tab(-1)
3235 cmap <ESC>   eval fm.ui.console.close()
3236 cmap <CR>    eval fm.ui.console.execute()
3237 cmap <C-l>   redraw_window
3238
3239 copycmap <ESC> <C-c>
3240 copycmap <CR>  <C-j>
3241
3242 # Move around
3243 cmap <up>    eval fm.ui.console.history_move(-1)
3244 cmap <down>  eval fm.ui.console.history_move(1)
3245 cmap <left>  eval fm.ui.console.move(left=1)
3246 cmap <right> eval fm.ui.console.move(right=1)
3247 cmap <home>  eval fm.ui.console.move(right=0, absolute=True)
3248 cmap <end>   eval fm.ui.console.move(right=-1, absolute=True)
3249
3250 # Line Editing
3251 cmap <backspace>  eval fm.ui.console.delete(-1)
3252 cmap <delete>     eval fm.ui.console.delete(0)
3253 cmap <C-w>        eval fm.ui.console.delete_word()
3254 cmap <C-k>        eval fm.ui.console.delete_rest(1)
3255 cmap <C-u>        eval fm.ui.console.delete_rest(-1)
3256 cmap <C-y>        eval fm.ui.console.paste()
3257
3258 # And of course the emacs way
3259 copycmap <up>        <C-p>
3260 copycmap <down>      <C-n>
3261 copycmap <left>      <C-b>
3262 copycmap <right>     <C-f>
3263 copycmap <home>      <C-a>
3264 copycmap <end>       <C-e>
3265 copycmap <delete>    <C-d>
3266 copycmap <backspace> <C-h>
3267
3268 # Note: There are multiple ways to express backspaces.  <backspace> (code 263)
3269 # and <backspace2> (code 127).  To be sure, use both.
3270 copycmap <backspace> <backspace2>
3271
3272 # This special expression allows typing in numerals:
3273 cmap <allow_quantifiers> false
3274
3275 # ===================================================================
3276 # == Pager Keybindings
3277 # ===================================================================
3278
3279 # Movement
3280 pmap  <down>      pager_move  down=1
3281 pmap  <up>        pager_move  up=1
3282 pmap  <left>      pager_move  left=4
3283 pmap  <right>     pager_move  right=4
3284 pmap  <home>      pager_move  to=0
3285 pmap  <end>       pager_move  to=-1
3286 pmap  <pagedown>  pager_move  down=1.0  pages=True
3287 pmap  <pageup>    pager_move  up=1.0    pages=True
3288 pmap  <C-d>       pager_move  down=0.5  pages=True
3289 pmap  <C-u>       pager_move  up=0.5    pages=True
3290
3291 copypmap <UP>       k  <C-p>
3292 copypmap <DOWN>     j  <C-n> <CR>
3293 copypmap <LEFT>     h
3294 copypmap <RIGHT>    l
3295 copypmap <HOME>     g
3296 copypmap <END>      G
3297 copypmap <C-d>      d
3298 copypmap <C-u>      u
3299 copypmap <PAGEDOWN> n  f  <C-F>  <Space>
3300 copypmap <PAGEUP>   p  b  <C-B>
3301
3302 # Basic
3303 pmap     <ESC> pager_close
3304 copypmap <ESC> q Q i <F3>
3305 pmap E      edit_file
3306
3307 # ===================================================================
3308 # == Taskview Keybindings
3309 # ===================================================================
3310
3311 # Movement
3312 tmap <up>        taskview_move up=1
3313 tmap <down>      taskview_move down=1
3314 tmap <home>      taskview_move to=0
3315 tmap <end>       taskview_move to=-1
3316 tmap <pagedown>  taskview_move down=1.0  pages=True
3317 tmap <pageup>    taskview_move up=1.0    pages=True
3318 tmap <C-d>       taskview_move down=0.5  pages=True
3319 tmap <C-u>       taskview_move up=0.5    pages=True
3320
3321 copytmap <UP>       k  <C-p>
3322 copytmap <DOWN>     j  <C-n> <CR>
3323 copytmap <HOME>     g
3324 copytmap <END>      G
3325 copytmap <C-u>      u
3326 copytmap <PAGEDOWN> n  f  <C-F>  <Space>
3327 copytmap <PAGEUP>   p  b  <C-B>
3328
3329 # Changing priority and deleting tasks
3330 tmap J          eval -q fm.ui.taskview.task_move(-1)
3331 tmap K          eval -q fm.ui.taskview.task_move(0)
3332 tmap dd         eval -q fm.ui.taskview.task_remove()
3333 tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
3334 tmap <pageup>   eval -q fm.ui.taskview.task_move(0)
3335 tmap <delete>   eval -q fm.ui.taskview.task_remove()
3336
3337 # Basic
3338 tmap <ESC> taskview_close
3339 copytmap <ESC> q Q w <C-c>
3340 #+end_src
3341
3342 *** scope.sh
3343 :PROPERTIES:
3344 :header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
3345 :END:
3346
3347 #+begin_src sh :tangle no
3348 # ranger supports enhanced previews.  If the option "use_preview_script"
3349 # is set to True and this file exists, this script will be called and its
3350 # output is displayed in ranger.  ANSI color codes are supported.
3351
3352 # NOTES: This script is considered a configuration file.  If you upgrade
3353 # ranger, it will be left untouched. (You must update it yourself.)
3354 # Also, ranger disables STDIN here, so interactive scripts won't work properly
3355
3356 # Meanings of exit codes:
3357 # code | meaning    | action of ranger
3358 # -----+------------+-------------------------------------------
3359 # 0    | success    | success. display stdout as preview
3360 # 1    | no preview | failure. display no preview at all
3361 # 2    | plain text | display the plain content of the file
3362 # 3    | fix width  | success. Don't reload when width changes
3363 # 4    | fix height | success. Don't reload when height changes
3364 # 5    | fix both   | success. Don't ever reload
3365
3366 # Meaningful aliases for arguments:
3367 path="$1"    # Full path of the selected file
3368 width="$2"   # Width of the preview pane (number of fitting characters)
3369 height="$3"  # Height of the preview pane (number of fitting characters)
3370
3371 maxln=200    # Stop after $maxln lines.  Can be used like ls | head -n $maxln
3372
3373 # Find out something about the file:
3374 mimetype=$(file --mime-type -Lb "$path")
3375 extension=${path##*.}
3376
3377 # Functions:
3378 # runs a command and saves its output into $output.  Useful if you need
3379 # the return value AND want to use the output in a pipe
3380 try() { output=$(eval '"$@"'); }
3381
3382 # writes the output of the previouosly used "try" command
3383 dump() { echo "$output"; }
3384
3385 # a common post-processing function used after most commands
3386 trim() { head -n "$maxln"; }
3387
3388 # wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
3389 highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }
3390
3391 case "$extension" in
3392     # Archive extensions:
3393     7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
3394     rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
3395         try als "$path" && { dump | trim; exit 0; }
3396         try acat "$path" && { dump | trim; exit 3; }
3397         try bsdtar -lf "$path" && { dump | trim; exit 0; }
3398         exit 1;;
3399     rar)
3400         try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
3401     # PDF documents:
3402     pdf)
3403         try pdftotext -l 10 -nopgbrk -q "$path" - && \
3404             { dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
3405     # BitTorrent Files
3406     torrent)
3407         try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
3408     # HTML Pages:
3409     htm|html|xhtml)
3410         try w3m    -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3411         try lynx   -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3412         try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3413         ;; # fall back to highlight/cat if the text browsers fail
3414 esac
3415
3416 case "$mimetype" in
3417     # Syntax highlight for text files:
3418     text/* | */xml)
3419         try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
3420     # Ascii-previews of images:
3421     image/*)
3422         img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
3423     # Display information about media files:
3424     video/* | audio/*)
3425         exiftool "$path" && exit 5
3426         # Use sed to remove spaces so the output fits into the narrow window
3427         try mediainfo "$path" && { dump | trim | sed 's/  \+:/: /;';  exit 5; } || exit 1;;
3428 esac
3429
3430 exit 1
3431 #+end_src
3432
3433 ** redshift
3434 :PROPERTIES:
3435 :header-args+: :tangle ~/.config/redshift.conf :comments none
3436 :END:
3437
3438 #+begin_src conf
3439 ; Global settings for redshift
3440 [redshift]
3441 ; Set the day and night screen temperatures (Neutral is 6500K)
3442 ;temp-day=5700
3443 ;temp-night=3500
3444
3445 ;temp-day=6500
3446 temp-day=6200
3447 ;temp-night=4800
3448 ;temp-night=5000
3449 ;temp-night=4500
3450 temp-night=4000
3451
3452 ; Enable/Disable a smooth transition between day and night
3453 ; 0 will cause a direct change from day to night screen temperature.
3454 ; 1 will gradually increase or decrease the screen temperature.
3455 transition=1
3456
3457 ; Set the screen brightness. Default is 1.0.
3458 ;brightness=0.9
3459 ; It is also possible to use different settings for day and night
3460 ; since version 1.8.
3461 ;brightness-day=0.7
3462 ;brightness-night=0.4
3463 ; Set the screen gamma (for all colors, or each color channel
3464 ; individually)
3465 ;gamma=0.8
3466 ;gamma=1.0
3467 ;gamma=0.8:0.7:0.8
3468 ; This can also be set individually for day and night since
3469 ; version 1.10.
3470 ;gamma-day=0.8:0.7:0.8
3471 ;gamma-night=0.6
3472
3473 ; Set the location-provider: 'geoclue2' or 'manual'
3474 ; type 'redshift -l list' to see possible values.
3475 ; The location provider settings are in a different section.
3476 ;location-provider=manual
3477 location-provider=geoclue2
3478
3479 ; Set the adjustment-method: 'randr', 'vidmode'
3480 ; type 'redshift -m list' to see all possible values.
3481 ; 'randr' is the preferred method, 'vidmode' is an older API.
3482 ; but works in some cases when 'randr' does not.
3483 ; The adjustment method settings are in a different section.
3484 adjustment-method=randr
3485
3486 ; Configuration of the location-provider:
3487 ; type 'redshift -l PROVIDER:help' to see the settings.
3488 ; ex: 'redshift -l manual:help'
3489 ; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
3490 ; are negative numbers.
3491 ;[manual]
3492 ;lat=48.1
3493 ;lon=11.6
3494
3495 ; Configuration of the adjustment-method
3496 ; type 'redshift -m METHOD:help' to see the settings.
3497 ; ex: 'redshift -m randr:help'
3498 ; In this example, randr is configured to adjust screen 1.
3499 ; Note that the numbering starts from 0, so this is actually the
3500 ; second screen. If this option is not specified, Redshift will try
3501 ; to adjust _all_ screens.
3502 ;[randr]
3503 ;screen=1
3504 #+end_src
3505
3506 ** rofi
3507 :PROPERTIES:
3508 :header-args+: :tangle ~/.config/rofi/config
3509 :END:
3510
3511 #+begin_src conf
3512 rofi.font: Ubuntu Mono 13
3513 ! rofi.font: Inconsolata 16
3514 ! rofi.font: Iosevka 13
3515 ! rofi.font: Source Code Pro 11
3516 rofi.modi: run,window
3517 ! rofi.width: 640
3518 rofi.width: 600
3519 !rofi.location: 2
3520 !rofi.yoffset: 200
3521 rofi.monitor: -1
3522 !rofi.lines: 10
3523
3524 !rofi.theme: /usr/share/rofi/themes//Arc.rasi
3525 !rofi.theme: /usr/share/rofi/themes//Paper.rasi
3526 !rofi.theme: /usr/share/rofi/themes//sidebar.rasi
3527
3528 rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
3529 #+end_src
3530
3531 ** rofi-pass
3532 :PROPERTIES:
3533 :header-args+: :tangle ~/.config/rofi-pass/config
3534 :END:
3535
3536 #+begin_src conf
3537 # permanently set alternative root dir
3538 # root=/path/to/root
3539
3540 # rofi command. Make sure to have "$@" as last argument
3541 _rofi () {
3542     #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
3543     rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
3544 }
3545
3546 # xdotool needs the keyboard layout to be set using setxkbmap
3547 # You can do this in your autostart scripts (e.g. xinitrc)
3548
3549 # If for some reason, you cannot do this, you can set the command here.
3550 # and set fix_layout to true
3551 fix_layout=false
3552
3553 layout_cmd () {
3554   setxkbmap us
3555 }
3556
3557 # fields to be used
3558 URL_field='url'
3559 USERNAME_field='user'
3560 AUTOTYPE_field='autotype'
3561
3562 # delay to be used for :delay keyword
3563 delay=2
3564
3565 ## Programs to be used
3566 # Editor
3567 EDITOR='gvim -f'
3568
3569 # Browser
3570 BROWSER='chromium'
3571
3572 ## Misc settings
3573
3574 default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
3575 auto_enter='false'
3576 notify='false'
3577 default_autotype='user :tab pass'
3578
3579 # color of the help messages
3580 # leave empty for autodetection
3581 help_color="#4872FF"
3582
3583 # Clipboard settings
3584 # Possible options: primary, clipboard, both
3585 clip=primary
3586
3587 # Options for generating new password entries
3588 # default_user is also used for password files that have no user field.
3589 default_user=aminb
3590 default_user2=aminban
3591 password_length=30
3592
3593 # Custom Keybindings
3594 #autotype="Alt+1"
3595 autotype="Alt+m"
3596 type_user="Alt+2"
3597 type_pass="Alt+3"
3598 open_url="Alt+4"
3599 copy_name="Alt+u"
3600 copy_url="Alt+l"
3601 copy_pass="Alt+p"
3602 show="Alt+o"
3603 copy_entry="Alt+2"
3604 type_entry="Alt+1"
3605 copy_menu="Alt+c"
3606 action_menu="Alt+a"
3607 type_menu="Alt+t"
3608 help="Alt+h"
3609 switch="Alt+x"
3610 insert_pass="Alt+n"
3611 #+end_src
3612
3613 ** sway
3614 :PROPERTIES:
3615 :header-args+: :tangle ~/.config/sway/config
3616 :END:
3617
3618 #+begin_src conf
3619 exec xrdb .Xresources
3620 ### Variables
3621 #
3622 # Logo key. Use Mod1 for Alt.
3623 set $mod Mod4
3624 set $left h
3625 set $down j
3626 set $up k
3627 set $right l
3628 set $term urxvt
3629 set $menu rofi -show run -display-run '> ' -display-window ' 🗔 '
3630
3631 ### Output configuration
3632 #
3633 # Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/)
3634 output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
3635 #
3636 # Example configuration:
3637 #
3638 #   output HDMI-A-1 resolution 1920x1080 position 1920,0
3639 #
3640 # You can get the names of your outputs by running: swaymsg -t get_outputs
3641
3642 ### Idle configuration
3643 #
3644 # Example configuration:
3645 #
3646 #exec swayidle \
3647 #    timeout 300 'swaylock -c 000000' \
3648 #    timeout 600 'swaymsg "output * dpms off"' \
3649 #       resume 'swaymsg "output * dpms on"' \
3650 #    before-sleep 'swaylock -c 000000'
3651 #
3652 # This will lock your screen after 300 seconds of inactivity, then turn off
3653 # your displays after another 600 seconds, and turn your screens back on when
3654 # resumed. It will also lock your screen before your computer goes to sleep.
3655
3656 ### Input configuration
3657
3658 input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
3659     dwt enabled
3660     tap enabled
3661     natural_scroll enabled
3662     middle_emulation enabled
3663 }
3664
3665 input "1:1:AT_Translated_Set_2_keyboard" {
3666     repeat_delay 200
3667     repeat_rate 45
3668 }
3669
3670
3671 ### Key bindings
3672 #
3673 # Basics:
3674 #
3675     # start a terminal
3676     bindsym $mod+Return exec $term
3677
3678     # kill focused window
3679     bindsym $mod+Shift+q kill
3680
3681     # start your launcher
3682     bindsym $mod+d exec $menu
3683
3684     # Drag floating windows by holding down $mod and left mouse button.
3685     # Resize them with right mouse button + $mod.
3686     # Despite the name, also works for non-floating windows.
3687     # Change normal to inverse to use left mouse button for resizing and right
3688     # mouse button for dragging.
3689     #floating_modifier $mod normal
3690
3691     # reload the configuration file
3692     bindsym $mod+Shift+c reload
3693
3694     # exit sway (logs you out of your wayland session)
3695     bindsym $mod+Shift+e exit
3696
3697     bindsym $mod+apostrophe exec rofi-light        # rofi-based brightness chooser
3698     bindsym XF86MonBrightnessUp exec light -A 5    # increase screen brightness
3699     bindsym XF86MonBrightnessDown exec light -U 5  # decrease screen brightness
3700
3701     bindsym $mod+bracketleft exec sway-ws-util switch prev
3702     bindsym $mod+bracketright exec sway-ws-util switch next
3703
3704     bindsym $mod+braceleft exec sway-ws-util move prev follow
3705     bindsym $mod+braceright exec sway-ws-util move next follow
3706 #
3707 # Moving around:
3708 #
3709     # Move your focus around
3710     bindsym $mod+$left focus left
3711     bindsym $mod+$down focus down
3712     bindsym $mod+$up focus up
3713     bindsym $mod+$right focus right
3714     # or use $mod+[up|down|left|right]
3715     bindsym $mod+Left focus left
3716     bindsym $mod+Down focus down
3717     bindsym $mod+Up focus up
3718     bindsym $mod+Right focus right
3719
3720     # _move_ the focused window with the same, but add Shift
3721     bindsym $mod+Shift+$left move left
3722     bindsym $mod+Shift+$down move down
3723     bindsym $mod+Shift+$up move up
3724     bindsym $mod+Shift+$right move right
3725     # ditto, with arrow keys
3726     bindsym $mod+Shift+Left move left
3727     bindsym $mod+Shift+Down move down
3728     bindsym $mod+Shift+Up move up
3729     bindsym $mod+Shift+Right move right
3730 #
3731 # Workspaces:
3732 #
3733     # switch to workspace
3734     bindsym $mod+1 workspace 1
3735     bindsym $mod+2 workspace 2
3736     bindsym $mod+3 workspace 3
3737     bindsym $mod+4 workspace 4
3738     bindsym $mod+5 workspace 5
3739     bindsym $mod+6 workspace 6
3740     bindsym $mod+7 workspace 7
3741     bindsym $mod+8 workspace 8
3742     bindsym $mod+9 workspace 9
3743     bindsym $mod+0 workspace 10
3744     # move focused container to workspace
3745     bindsym $mod+Shift+1 move container to workspace 1
3746     bindsym $mod+Shift+2 move container to workspace 2
3747     bindsym $mod+Shift+3 move container to workspace 3
3748     bindsym $mod+Shift+4 move container to workspace 4
3749     bindsym $mod+Shift+5 move container to workspace 5
3750     bindsym $mod+Shift+6 move container to workspace 6
3751     bindsym $mod+Shift+7 move container to workspace 7
3752     bindsym $mod+Shift+8 move container to workspace 8
3753     bindsym $mod+Shift+9 move container to workspace 9
3754     bindsym $mod+Shift+0 move container to workspace 10
3755     # Note: workspaces can have any name you want, not just numbers.
3756     # We just use 1-10 as the default.
3757 #
3758 # Layout stuff:
3759 #
3760     # You can "split" the current object of your focus with
3761     # $mod+b or $mod+v, for horizontal and vertical splits
3762     # respectively.
3763     bindsym $mod+b splith
3764     bindsym $mod+v splitv
3765
3766     # Switch the current container between different layout styles
3767     bindsym $mod+s layout stacking
3768     bindsym $mod+w layout tabbed
3769     bindsym $mod+e layout toggle split
3770
3771     # Make the current focus fullscreen
3772     bindsym $mod+f fullscreen
3773
3774     # Toggle the current focus between tiling and floating mode
3775     bindsym $mod+Shift+space floating toggle
3776
3777     # Swap focus between the tiling area and the floating area
3778     bindsym $mod+space focus mode_toggle
3779
3780     # move focus to the parent container
3781     bindsym $mod+a focus parent
3782 #
3783 # Scratchpad:
3784 #
3785     # Sway has a "scratchpad", which is a bag of holding for windows.
3786     # You can send windows there and get them back later.
3787
3788     # Move the currently focused window to the scratchpad
3789     bindsym $mod+Shift+minus move scratchpad
3790
3791     # Show the next scratchpad window or hide the focused scratchpad window.
3792     # If there are multiple scratchpad windows, this command cycles through them.
3793     bindsym $mod+minus scratchpad show
3794 #
3795 # Resizing containers:
3796 #
3797 mode "resize" {
3798     # left will shrink the containers width
3799     # right will grow the containers width
3800     # up will shrink the containers height
3801     # down will grow the containers height
3802     bindsym $left resize shrink width 10px
3803     bindsym $down resize grow height 10px
3804     bindsym $up resize shrink height 10px
3805     bindsym $right resize grow width 10px
3806
3807     # ditto, with arrow keys
3808     bindsym Left resize shrink width 10px
3809     bindsym Down resize grow height 10px
3810     bindsym Up resize shrink height 10px
3811     bindsym Right resize grow width 10px
3812
3813     # return to default mode
3814     bindsym Return mode "default"
3815     bindsym Escape mode "default"
3816 }
3817 bindsym $mod+r mode "resize"
3818
3819 #
3820 # Status Bar:
3821 #
3822 # Read `man 5 sway-bar` for more information about this section.
3823 bar {
3824     position bottom
3825     colors {
3826         statusline #ffffff
3827         background #323232
3828         inactive_workspace #32323200 #32323200 #5c5c5c
3829     }
3830     status_command i3blocks
3831 }
3832
3833 include /etc/sway/config.d/*
3834 #+end_src
3835
3836 ** TLP
3837
3838 *** TODO enigma
3839 *** plasma
3840
3841 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/default/tlp")
3842 # ------------------------------------------------------------------------------
3843 # tlp - Parameters for power saving
3844 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
3845
3846 # Hint: some features are disabled by default, remove the leading # to enable
3847 # them.
3848
3849 # Set to 0 to disable, 1 to enable TLP.
3850 TLP_ENABLE=1
3851
3852 # Operation mode when no power supply can be detected: AC, BAT.
3853 # Concerns some desktop and embedded hardware only.
3854 TLP_DEFAULT_MODE=AC
3855
3856 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
3857 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
3858 TLP_PERSISTENT_DEFAULT=0
3859
3860 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
3861 # Non-zero value enables, zero disables laptop mode.
3862 DISK_IDLE_SECS_ON_AC=0
3863 DISK_IDLE_SECS_ON_BAT=2
3864
3865 # Dirty page values (timeouts in secs).
3866 MAX_LOST_WORK_SECS_ON_AC=15
3867 MAX_LOST_WORK_SECS_ON_BAT=60
3868
3869 # Hint: CPU parameters below are disabled by default, remove the leading #
3870 # to enable them, otherwise kernel default values are used.
3871
3872 # Select a CPU frequency scaling governor.
3873 # Intel Core i processor with intel_pstate driver:
3874 #   powersave(*), performance.
3875 # Older hardware with acpi-cpufreq driver:
3876 #   ondemand(*), powersave, performance, conservative, schedutil.
3877 # (*) is recommended.
3878 # Hint: use tlp-stat -p to show the active driver and available governors.
3879 # Important:
3880 #   powersave for intel_pstate and ondemand for acpi-cpufreq are power
3881 #   efficient for *almost all* workloads and therefore kernel and most
3882 #   distributions have chosen them as defaults. If you still want to change,
3883 #   you should know what you're doing! You *must* disable your distribution's
3884 #   governor settings or conflicts will occur.
3885 #CPU_SCALING_GOVERNOR_ON_AC=powersave
3886 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
3887
3888 # Set the min/max frequency available for the scaling governor.
3889 # Possible values strongly depend on your CPU. For available frequencies see
3890 # the output of tlp-stat -p.
3891 #CPU_SCALING_MIN_FREQ_ON_AC=0
3892 #CPU_SCALING_MAX_FREQ_ON_AC=0
3893 #CPU_SCALING_MIN_FREQ_ON_BAT=0
3894 #CPU_SCALING_MAX_FREQ_ON_BAT=0
3895
3896 # Set energy performance hints (HWP) for Intel P-state governor:
3897 #   performance, balance_performance, default, balance_power, power
3898 # Values are given in order of increasing power saving.
3899 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
3900 CPU_HWP_ON_AC=balance_performance
3901 CPU_HWP_ON_BAT=balance_power
3902
3903 # Set Intel P-state performance: 0..100 (%).
3904 # Limit the max/min P-state to control the power dissipation of the CPU.
3905 # Values are stated as a percentage of the available performance.
3906 # Requires an Intel Core i processor with intel_pstate driver.
3907 #CPU_MIN_PERF_ON_AC=0
3908 #CPU_MAX_PERF_ON_AC=100
3909 #CPU_MIN_PERF_ON_BAT=0
3910 #CPU_MAX_PERF_ON_BAT=30
3911
3912 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
3913 # Requires an Intel Core i processor.
3914 # Important:
3915 # - This may conflict with your distribution's governor settings
3916 # - A value of 1 does *not* activate boosting, it just allows it
3917 #CPU_BOOST_ON_AC=1
3918 #CPU_BOOST_ON_BAT=0
3919
3920 # Minimize number of used CPU cores/hyper-threads under light load conditions:
3921 #   0=disable, 1=enable.
3922 SCHED_POWERSAVE_ON_AC=0
3923 SCHED_POWERSAVE_ON_BAT=1
3924
3925 # Kernel NMI Watchdog:
3926 #   0=disable (default, saves power), 1=enable (for kernel debugging only).
3927 NMI_WATCHDOG=0
3928
3929 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
3930 # Frequency voltage pairs are written to:
3931 #   /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
3932 # CAUTION: only use this, if you thoroughly understand what you are doing!
3933 #PHC_CONTROLS="F:V F:V F:V F:V"
3934
3935 # Set CPU performance versus energy savings policy:
3936 #   performance, balance-performance, default, balance-power, power.
3937 # Values are given in order of increasing power saving.
3938 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
3939 ENERGY_PERF_POLICY_ON_AC=performance
3940 ENERGY_PERF_POLICY_ON_BAT=balance-power
3941
3942 # Disk devices; separate multiple devices with spaces (default: sda).
3943 # Devices can be specified by disk ID also (lookup with: tlp diskid).
3944 DISK_DEVICES="sda sdb"
3945
3946 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
3947 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
3948 # Separate values for multiple disks with spaces. Use the special value 'keep'
3949 # to keep the hardware default for the particular disk.
3950 DISK_APM_LEVEL_ON_AC="254 254"
3951 DISK_APM_LEVEL_ON_BAT="128 128"
3952
3953 # Hard disk spin down timeout:
3954 #   0:        spin down disabled
3955 #   1..240:   timeouts from 5s to 20min (in units of 5s)
3956 #   241..251: timeouts from 30min to 5.5 hours (in units of 30min)
3957 # See 'man hdparm' for details.
3958 # Separate values for multiple disks with spaces. Use the special value 'keep'
3959 # to keep the hardware default for the particular disk.
3960 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
3961 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
3962
3963 # Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
3964 # Separate values for multiple disks with spaces. Use the special value 'keep'
3965 # to keep the kernel default scheduler for the particular disk.
3966 #DISK_IOSCHED="cfq cfq"
3967
3968 # AHCI link power management (ALPM) for disk devices:
3969 #   min_power, med_power_with_dipm(*), medium_power, max_performance.
3970 # (*) Kernel >= 4.15 required, then recommended.
3971 # Multiple values separated with spaces are tried sequentially until success.
3972 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
3973 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
3974
3975 # Exclude host devices from AHCI link power management.
3976 # Separate multiple hosts with spaces.
3977 #SATA_LINKPWR_BLACKLIST="host1"
3978
3979 # Runtime Power Management for AHCI host and disks devices:
3980 #   on=disable, auto=enable.
3981 # EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
3982 #AHCI_RUNTIME_PM_ON_AC=on
3983 #AHCI_RUNTIME_PM_ON_BAT=on
3984
3985 # Seconds of inactivity before disk is suspended.
3986 AHCI_RUNTIME_PM_TIMEOUT=15
3987
3988 # PCI Express Active State Power Management (PCIe ASPM):
3989 #   default, performance, powersave.
3990 PCIE_ASPM_ON_AC=performance
3991 PCIE_ASPM_ON_BAT=powersave
3992
3993 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
3994 # auto = mid on BAT, high on AC; default = use hardware defaults.
3995 RADEON_POWER_PROFILE_ON_AC=high
3996 RADEON_POWER_PROFILE_ON_BAT=low
3997
3998 # Radeon dynamic power management method (DPM): battery, performance.
3999 RADEON_DPM_STATE_ON_AC=performance
4000 RADEON_DPM_STATE_ON_BAT=battery
4001
4002 # Radeon DPM performance level: auto, low, high; auto is recommended.
4003 RADEON_DPM_PERF_LEVEL_ON_AC=auto
4004 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4005
4006 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4007 WIFI_PWR_ON_AC=off
4008 WIFI_PWR_ON_BAT=on
4009
4010 # Disable wake on LAN: Y/N.
4011 WOL_DISABLE=Y
4012
4013 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4014 # A value of 0 disables, >=1 enables power saving (recommended: 1).
4015 SOUND_POWER_SAVE_ON_AC=0
4016 SOUND_POWER_SAVE_ON_BAT=0
4017
4018 # Disable controller too (HDA only): Y/N.
4019 SOUND_POWER_SAVE_CONTROLLER=N
4020
4021 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4022 # Drive can be powered on again by releasing (and reinserting) the eject lever
4023 # or by pressing the disc eject button on newer models.
4024 # Note: an UltraBay/MediaBay hard disk is never powered off.
4025 BAY_POWEROFF_ON_AC=0
4026 BAY_POWEROFF_ON_BAT=0
4027 # Optical drive device to power off (default sr0).
4028 BAY_DEVICE="sr0"
4029
4030 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4031 RUNTIME_PM_ON_AC=on
4032 RUNTIME_PM_ON_BAT=auto
4033
4034 # Exclude PCI(e) device adresses the following list from Runtime PM
4035 # (separate with spaces). Use lspci to get the adresses (1st column).
4036 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4037 RUNTIME_PM_BLACKLIST="01:00.0"
4038
4039 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4040 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4041 # prevents accidential power-on of dGPU in hybrid graphics setups.
4042 # Use "" to disable the feature completely.
4043 # Separate multiple drivers with spaces.
4044 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4045
4046 # Set to 0 to disable, 1 to enable USB autosuspend feature.
4047 USB_AUTOSUSPEND=1
4048
4049 # Exclude listed devices from USB autosuspend (separate with spaces).
4050 # Use lsusb to get the ids.
4051 # Note: input devices (usbhid) are excluded automatically
4052 #USB_BLACKLIST="1111:2222 3333:4444"
4053
4054 # Bluetooth devices are excluded from USB autosuspend:
4055 #   0=do not exclude, 1=exclude.
4056 USB_BLACKLIST_BTUSB=0
4057
4058 # Phone devices are excluded from USB autosuspend:
4059 #   0=do not exclude, 1=exclude (enable charging).
4060 USB_BLACKLIST_PHONE=0
4061
4062 # Printers are excluded from USB autosuspend:
4063 #   0=do not exclude, 1=exclude.
4064 USB_BLACKLIST_PRINTER=1
4065
4066 # WWAN devices are excluded from USB autosuspend:
4067 #   0=do not exclude, 1=exclude.
4068 USB_BLACKLIST_WWAN=1
4069
4070 # Include listed devices into USB autosuspend even if already excluded
4071 # by the blacklists above (separate with spaces).
4072 # Use lsusb to get the ids.
4073 #USB_WHITELIST="1111:2222 3333:4444"
4074
4075 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4076 # (workaround for USB devices that cause shutdown problems).
4077 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4078
4079 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4080 # on system startup: 0=disable, 1=enable.
4081 # Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4082 #   are ignored when this is enabled!
4083 #RESTORE_DEVICE_STATE_ON_STARTUP=0
4084 RESTORE_DEVICE_STATE_ON_STARTUP=1
4085
4086 # Radio devices to disable on startup: bluetooth, wifi, wwan.
4087 # Separate multiple devices with spaces.
4088 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
4089
4090 # Radio devices to enable on startup: bluetooth, wifi, wwan.
4091 # Separate multiple devices with spaces.
4092 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4093
4094 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4095 # (workaround for devices that are blocking shutdown).
4096 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4097
4098 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4099 # (to prevent other operating systems from missing radios).
4100 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4101
4102 # Radio devices to enable on AC: bluetooth, wifi, wwan.
4103 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4104
4105 # Radio devices to disable on battery: bluetooth, wifi, wwan.
4106 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4107
4108 # Radio devices to disable on battery when not in use (not connected):
4109 #   bluetooth, wifi, wwan.
4110 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4111
4112 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4113 # required). Charging starts when the remaining capacity falls below the
4114 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4115 # Main / Internal battery (values in %)
4116 #START_CHARGE_THRESH_BAT0=75
4117 #STOP_CHARGE_THRESH_BAT0=80
4118 # Ultrabay / Slice / Replaceable battery (values in %)
4119 #START_CHARGE_THRESH_BAT1=75
4120 #STOP_CHARGE_THRESH_BAT1=80
4121
4122 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4123 #RESTORE_THRESHOLDS_ON_BAT=1
4124
4125 # ------------------------------------------------------------------------------
4126 # tlp-rdw - Parameters for the radio device wizard
4127 # Possible devices: bluetooth, wifi, wwan.
4128
4129 # Hints:
4130 # - Parameters are disabled by default, remove the leading # to enable them
4131 # - Separate multiple radio devices with spaces
4132
4133 # Radio devices to disable on connect.
4134 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4135 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4136 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4137
4138 # Radio devices to enable on disconnect.
4139 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4140 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4141 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4142
4143 # Radio devices to enable/disable when docked.
4144 #DEVICES_TO_ENABLE_ON_DOCK=""
4145 #DEVICES_TO_DISABLE_ON_DOCK=""
4146
4147 # Radio devices to enable/disable when undocked.
4148 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4149 #DEVICES_TO_DISABLE_ON_UNDOCK=""
4150 #+end_src
4151
4152 ** X
4153
4154 *** xprofile
4155 :PROPERTIES:
4156 :header-args+: :tangle ~/.xprofile
4157 :END:
4158
4159 =~/.xprofile= is similar in style to =~/.xinitrc=, but on the
4160 contrary, it's automatically sourced by LightDM, my display manager of
4161 choice.
4162
4163 #+begin_src sh :tangle no
4164 xset -b  # disable bell
4165 xset r rate 200 45  # repeat delay (ms) and rate (repeats/sec)
4166
4167 # setxkbmap -option compose:ralt
4168
4169 setxkbmap -option ctrl:nocaps          # turn capslock into control
4170 setxkbmap -option altwin:swap_alt_win  # swap alt and super
4171
4172 if [ $(hostname) = "plasma" ]
4173 then
4174     setxkbmap -option ctrl:rctrl_ralt  # turn right control into right alt
4175 fi
4176
4177 if [ $(hostname) = "enigma" ]
4178 then
4179     xmodmap -e "keycode 135 = Alt_R"  # remap menu key to alt
4180 fi
4181
4182 light -Scrs "intel_backlight" 2
4183
4184 source $HOME/.zprofile
4185
4186 export _JAVA_AWT_WM_NONREPARENTING=1
4187 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4188
4189 if [ $(hostname) = "plasma" ]
4190 then
4191     unlock-def-gk.py &
4192 fi
4193
4194 bspwm &
4195 #+end_src
4196
4197 *** X resources
4198
4199 **** Xresources
4200 :PROPERTIES:
4201 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
4202 :END:
4203
4204 #+begin_src conf-xdefaults
4205 #include ".Xresources.d/fonts"
4206 ! #include ".Xresources.d/colors"
4207 #include ".Xresources.d/emacs"
4208 #include ".Xresources.d/rxvt-unicode"
4209 #+end_src
4210
4211 **** Xresources.d
4212
4213 ***** fonts
4214 :PROPERTIES:
4215 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
4216 :END:
4217
4218 #+begin_src conf-xdefaults
4219 Xft.lcdfilter: lcddefault
4220 Xft.antialias: true
4221 Xft.autohint: 0
4222 Xft.hinting: true
4223 Xft.hintstyle: hintslight
4224 ! Xft.hintstyle: hintfull
4225 Xft.rgba: rgb
4226 Xft.dpi: 96
4227 #+end_src
4228
4229 ***** colors
4230 :PROPERTIES:
4231 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
4232 :END:
4233
4234 #+begin_src conf-xdefaults :tangle no
4235 #include "gruvbox-light.xresources"
4236 ! #include "gruvbox-dark.xresources"
4237 #include "gruvbox-urxvt256.xresources"
4238 #+end_src
4239
4240 #+begin_src conf-xdefaults :tangle no
4241 ! -----------------------------------------------------------------------------
4242 ! File: gruvbox-light.xresources
4243 ! Description: Retro groove colorscheme generalized
4244 ! Author: morhetz <morhetz@gmail.com>
4245 ! Source: https://github.com/morhetz/gruvbox-generalized
4246 ! Last Modified: 6 Sep 2014
4247 ! -----------------------------------------------------------------------------
4248
4249 ! hard contrast: *background: #f9f5d7
4250 *background: #fbf1c7
4251 ! soft contrast: *background: #f2e5bc
4252 *foreground: #3c3836
4253 ! Black + DarkGrey
4254 *color0:  #fdf4c1
4255 *color8:  #928374
4256 ! DarkRed + Red
4257 *color1:  #cc241d
4258 *color9:  #9d0006
4259 ! DarkGreen + Green
4260 *color2:  #98971a
4261 *color10: #79740e
4262 ! DarkYellow + Yellow
4263 *color3:  #d79921
4264 *color11: #b57614
4265 ! DarkBlue + Blue
4266 *color4:  #458588
4267 *color12: #076678
4268 ! DarkMagenta + Magenta
4269 *color5:  #b16286
4270 *color13: #8f3f71
4271 ! DarkCyan + Cyan
4272 *color6:  #689d6a
4273 *color14: #427b58
4274 ! LightGrey + White
4275 *color7:  #7c6f64
4276 *color15: #3c3836
4277 #+end_src
4278
4279 #+begin_src conf-xdefaults :tangle no
4280 ! -----------------------------------------------------------------------------
4281 ! File: gruvbox-dark.xresources
4282 ! Description: Retro groove colorscheme generalized
4283 ! Author: morhetz <morhetz@gmail.com>
4284 ! Source: https://github.com/morhetz/gruvbox-generalized
4285 ! Last Modified: 6 Sep 2014
4286 ! -----------------------------------------------------------------------------
4287
4288 ! hard contrast: *background: #1d2021
4289 *background: #282828
4290 ! soft contrast: *background: #32302f
4291 *foreground: #ebdbb2
4292 ! Black + DarkGrey
4293 *color0:  #282828
4294 *color8:  #928374
4295 ! DarkRed + Red
4296 *color1:  #cc241d
4297 *color9:  #fb4934
4298 ! DarkGreen + Green
4299 *color2:  #98971a
4300 *color10: #b8bb26
4301 ! DarkYellow + Yellow
4302 *color3:  #d79921
4303 *color11: #fabd2f
4304 ! DarkBlue + Blue
4305 *color4:  #458588
4306 *color12: #83a598
4307 ! DarkMagenta + Magenta
4308 *color5:  #b16286
4309 *color13: #d3869b
4310 ! DarkCyan + Cyan
4311 *color6:  #689d6a
4312 *color14: #8ec07c
4313 ! LightGrey + White
4314 *color7:  #a89984
4315 *color15: #ebdbb2
4316 #+end_src
4317
4318 #+begin_src conf-xdefaults :tangle no
4319 ! -----------------------------------------------------------------------------
4320 ! File: gruvbox-urxvt256.xresources
4321 ! Description: Retro groove colorscheme generalized
4322 ! Author: morhetz <morhetz@gmail.com>
4323 ! Source: https://github.com/morhetz/gruvbox-generalized
4324 ! Last Modified: 13 Dec 2013
4325 ! -----------------------------------------------------------------------------
4326
4327 URxvt.color24:  #076678
4328 URxvt.color66:  #427b58
4329 URxvt.color88:  #9d0006
4330 URxvt.color96:  #8f3f71
4331 URxvt.color100: #79740e
4332 URxvt.color108: #8ec07c
4333 URxvt.color109: #83a598
4334 URxvt.color130: #af3a03
4335 URxvt.color136: #b57614
4336 URxvt.color142: #b8bb26
4337 URxvt.color167: #fb4934
4338 URxvt.color175: #d3869b
4339 URxvt.color208: #fe8019
4340 URxvt.color214: #fabd2f
4341 URxvt.color223: #ebdbb2
4342 URxvt.color228: #f2e5bc
4343 URxvt.color229: #fbf1c7
4344 URxvt.color230: #f9f5d7
4345 URxvt.color234: #1d2021
4346 URxvt.color235: #282828
4347 URxvt.color236: #32302f
4348 URxvt.color237: #3c3836
4349 URxvt.color239: #504945
4350 URxvt.color241: #665c54
4351 URxvt.color243: #7c6f64
4352 URxvt.color244: #928374
4353 URxvt.color245: #928374
4354 URxvt.color246: #a89984
4355 URxvt.color248: #bdae93
4356 URxvt.color250: #d5c4a1
4357 #+end_src
4358
4359 ***** emacs
4360 :PROPERTIES:
4361 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
4362 :END:
4363
4364 #+begin_src conf-xdefaults
4365 Emacs.menuBar: off
4366 Emacs.toolBar: off
4367 Emacs.verticalScrollBars: off
4368 Emacs.cursorBlink: off
4369 Emacs.FontBackend: xft,x
4370 ! Emacs.font: Ubuntu Mono-12
4371 ! Emacs.font: Triplicate T4C-11
4372 ! Emacs.font: Ubuntu Mono-10.5
4373 ! Emacs.font: Ubuntu Mono-12
4374 ! Emacs.font: Iosevka-11
4375
4376 ! Emacs.font: Fira Mono:size=15
4377 ! Emacs.font: DejaVu Sans Mono:size=15
4378 ! Emacs.font: Inconsolata:size=17
4379 ! Emacs.font: Inconsolata:size=16
4380 ! Emacs.font: Inconsolata LGC:size=14
4381 ! Emacs.font: Source Code Pro Medium-10.5
4382 Emacs.font: Ubuntu Mono:size=16
4383 ! Emacs.font: Iosevka:size=16
4384 #+end_src
4385
4386 ***** rxvt-unicode
4387 :PROPERTIES:
4388 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
4389 :END:
4390
4391 #+begin_src conf-xdefaults
4392 ! Font
4393 URxvt.font:             xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
4394 URxvt.boldFont:         xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
4395 URxvt.italicFont:       xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
4396 URxvt.bolditalicFont:   xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
4397
4398 URxvt.xftAntialias:     true
4399 URxvt.letterSpace:      0
4400
4401 URxvt.depth:                0
4402 URxvt.loginShell:           true
4403 URxvt.saveLines:            100000
4404 URxvt.internalBorder:       3
4405 URxvt.lineSpace:            0
4406 URxvt.scrollBar:            false
4407 URxvt.scrollStyle:          rxvt
4408 URxvt*scrollTtyOutput:      false
4409 URxvt*scrollWithBuffer:     true
4410 URxvt*scrollTtyKeypress:    true
4411 URxvt.keysym.Shift-Up:      command:\033]720;1\007
4412 URxvt.keysym.Shift-Down:    command:\033]721;1\007
4413
4414 URxvt.perl-ext-common:      default,clipboard,url-select,keyboard-select
4415 URxvt.perl-ext:             bidi
4416 URxvt.bidi.enabled:         1
4417 URxvt.url-select.launcher:  firefox
4418 URxvt.url-select.underline: true
4419 URxvt.keysym.M-u:           perl:url-select:select_next
4420 URxvt.keysym.M-Escape:      perl:keyboard-select:activate
4421 URxvt.keysym.M-s:           perl:keyboard-select:search
4422 URxvt.url-launcher:         /usr/bin/firefox
4423 URxvt.matcher.button:       1
4424 URxvt.iso14755:             false
4425 URxvt.iso14755_53:          false
4426 URxvt.keysym.M-c:           perl:clipboard:copy
4427 URxvt.keysym.M-v:           perl:clipboard:paste
4428 URxvt.keysym.C-A-V:         perl:clipboard:paste_escaped
4429 URxvt.keysym.C-Up:          font-size:increase
4430 URxvt.keysym.C-Down:        font-size:decrease
4431 URxvt.keysym.C-S-Up:        font-size:incglobal
4432 URxvt.keysym.C-S-Down:      font-size:decglobal
4433 URxvt.keysym.C-equal:       font-size:reset
4434 !URxvt.keysym.C-question:   font-size:show
4435
4436 URxvt.iconFile:             /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
4437
4438 !urxvt*foreground: white
4439 !urxvt*background: black
4440
4441 !*color0:  #2E3436
4442 !*color1:  #a40000
4443 !*color2:  #4E9A06
4444 !*color3:  #C4A000
4445 !*color4:  #3465A4
4446 !*color5:  #75507B
4447 !*color6:  #ce5c00
4448 !*color7:  #babdb9
4449 !*color8:  #555753
4450 !*color9:  #EF2929
4451 !*color10: #8AE234
4452 !*color11: #FCE94F
4453 !*color12: #729FCF
4454 !*color13: #AD7FA8
4455 !*color14: #fcaf3e
4456 !*color15: #EEEEEC
4457
4458 !URxvt.foreground: #C8C8C8
4459 !URxvt.background: #FFFFFF
4460
4461 !! black
4462 !*color0:  #2E3436
4463 !*color8:  #555753
4464 !! red
4465 !*color1:  #a40000
4466 !*color9:  #EF2929
4467 !! green
4468 !*color2:  #4E9A06
4469 !*color10: #8AE234
4470 !! yellow
4471 !*color3:  #C4A000
4472 !*color11: #FCE94F
4473 !! blue
4474 !*color4:  #3465A4
4475 !*color12: #729FCF
4476 !! purple
4477 !*color5:  #75507B
4478 !*color13: #AD7FA8
4479 !! orange (replaces cyan)
4480 !*color6:  #ce5c00
4481 !*color14: #fcaf3e
4482 !! white
4483 !*color7:  #babdb9
4484 !*color15: #EEEEEC
4485
4486 ! Tango colour theme for rxvt-unicode
4487 URxvt.background: #FFFFFF
4488 URxvt.foreground: #000000
4489
4490 ! Black
4491 URxvt.color0: #2E3436
4492 URxvt.color8: #757773
4493
4494 ! Red
4495 URxvt.color1: #CC0000
4496 URxvt.color9: #EF2929
4497
4498 ! Green
4499 URxvt.color2: #4E9A06
4500 URxvt.color10: #8AE234
4501
4502 ! Yellow
4503 URxvt.color3: #C4A000
4504 URxvt.color11: #FCE94F
4505
4506 ! Blue
4507 URxvt.color4: #3465A4
4508 URxvt.color12: #729FCF
4509
4510 ! Magenta
4511 URxvt.color5: #75507B
4512 URxvt.color13: #AD7FA8
4513
4514 !! Cyan
4515 !URxvt.color6: #06989A
4516 !URxvt.color14: #34E2E2
4517 ! orange (replaces cyan)
4518 *color6:  #ce5c00
4519 *color14: #fcaf3e
4520
4521 ! White
4522 URxvt.color7: #D3D7CF
4523 URxvt.color15: #EEEEEC
4524 #+end_src
4525
4526 ** XDG
4527 :PROPERTIES:
4528 :header-args+: :tangle ~/.config/user-dirs.dirs
4529 :END:
4530
4531 #+begin_src conf
4532 XDG_DESKTOP_DIR="$HOME/Desktop"
4533 XDG_DOCUMENTS_DIR="$HOME/usr/docs"
4534 XDG_DOWNLOAD_DIR="$HOME/usr/dls"
4535 XDG_MUSIC_DIR="$HOME/usr/music"
4536 XDG_PICTURES_DIR="$HOME/usr/pics"
4537 XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
4538 XDG_TEMPLATES_DIR="$HOME/usr/Templates"
4539 XDG_VIDEOS_DIR="$HOME/usr/vids"
4540 #+end_src
4541
4542 ** Zathura
4543 :PROPERTIES:
4544 :header-args+: :tangle ~/.config/zathura/zathurarc
4545 :END:
4546
4547 #+begin_src conf
4548 set smooth-scroll true
4549 set selection-clipboard clipboard
4550 set zoom-step 05
4551 set default-bg "#272727"
4552 set statusbar-bg "#272727"
4553 set inputbar-bg "#373737"
4554 #+end_src
4555
4556 ** Zsh
4557
4558 My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
4559 [[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
4560 installed.
4561
4562 *** zimrc
4563 :PROPERTIES:
4564 :header-args+: :tangle ~/.zimrc
4565 :END:
4566
4567 #+begin_src sh
4568
4569
4570 #################
4571 # CORE SETTINGS #
4572 #################
4573
4574 #
4575 # Zim settings
4576 #
4577
4578 # Select what modules you would like enabled.
4579 # The second line of modules may depend on options set by modules in the first
4580 # line. These dependencies are noted on the respective module's README.md.
4581 zmodules=(directory environment git git-info history input ssh utility custom \
4582           syntax-highlighting history-substring-search prompt completion)
4583
4584
4585 ###################
4586 # MODULE SETTINGS #
4587 ###################
4588
4589 #
4590 # Prompt
4591 #
4592
4593 # Set your desired prompt here
4594 zprompt_theme='pure'
4595 #PURE_PROMPT_SYMBOL=λ
4596 #PURE_PROMPT_SYMBOL=δ
4597 PURE_PROMPT_SYMBOL=➜
4598
4599 #
4600 # Completion
4601 #
4602
4603 # set an optional host-specific filename for the completion cache file
4604 # if none is provided, the default '.zcompdump' is used.
4605 #zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
4606
4607 #
4608 # Utility
4609 #
4610
4611 # Uncomment to enable command correction prompts
4612 # See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
4613 setopt CORRECT
4614
4615 #
4616 # Environment
4617 #
4618
4619 # Set the string below to the desired terminal title format string.
4620 # The terminal title is redrawn upon directory change, however, variables like
4621 # ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
4622 #   http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
4623 # The example below uses the following format: 'username@host:/current/directory'
4624 ztermtitle='%n@%m:%~'
4625
4626 #
4627 # Input
4628 #
4629
4630 # Uncomment to enable double-dot expansion.
4631 # This appends '../' to your input for each '.' you type after an initial '..'
4632 #zdouble_dot_expand='true'
4633
4634 #
4635 # Syntax-Highlighting
4636 #
4637
4638 # This determines what highlighters will be used with the syntax-highlighting module.
4639 # Documentation of the highlighters can be found here:
4640 #   https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
4641 # For (u)rxvt, termite and gnome-terminal users,
4642 # removing the 'cursor' highlighter will fix the disappearing cursor problem
4643 #zhighlighters=(main brackets cursor)
4644 zhighlighters=(main brackets pattern)
4645
4646
4647 #
4648 # SSH
4649 #
4650
4651 # Load these ssh identities with the ssh module
4652 zssh_ids=(id_rsa plasma_id_rsa id_ed25519 id_rsa_aur)
4653
4654
4655 #
4656 # Pacman
4657 #
4658
4659 # Set (optional) pacman front-end.
4660 zpacman_frontend='yay'
4661
4662 # Load any helper scripts as defined here
4663 #zpacman_helper=(aur)
4664 #+end_src
4665
4666 *** zlogin
4667 :PROPERTIES:
4668 :header-args+: :tangle ~/.zlogin
4669 :END:
4670
4671 #+begin_src sh
4672
4673
4674 #
4675 # User configuration sourced by login shells
4676 #
4677
4678 # Initialize zim
4679 [[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
4680 #+end_src
4681
4682 *** zprofile
4683 :PROPERTIES:
4684 :header-args+: :tangle ~/.zprofile
4685 :END:
4686
4687 #+begin_src sh
4688 #PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
4689 #PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
4690 export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
4691 export XDG_CONFIG_HOME=$HOME/.config
4692 export XDG_DATA_HOME=$HOME/.local/share
4693 export XDG_DATA_DIRS=/usr/local/share:/usr/share
4694 export MAILDIR="$HOME/mail"
4695 export CVS_RSH=ssh
4696 #export MATHMODELS=$HOME/src/eiffel/mathmodels
4697 #export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
4698 #export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
4699
4700 # Eiffel2Java stuff
4701 #export JAVA_HOME=/usr/lib/jvm/default
4702 #export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
4703 #export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4704 #export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4705
4706 #export PATH="$HOME/usr/build/pvs:$PATH"
4707 #export SBCLISP_HOME=/usr/share/sbcl-source
4708 #export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
4709
4710 export MOZ_USE_XINPUT2=1  # precise scrolling in firefox
4711
4712 #export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
4713 #export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
4714
4715 if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
4716 #+end_src
4717
4718 *** zshenv
4719 :PROPERTIES:
4720 :header-args+: :tangle ~/.zshenv
4721 :END:
4722
4723 #+begin_src sh
4724 # Ensure that a non-login, non-interactive shell has a defined environment.
4725 if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
4726   source "${ZDOTDIR:-$HOME}/.zprofile"
4727 fi
4728 #+end_src
4729
4730 *** zshrc
4731 :PROPERTIES:
4732 :header-args+: :tangle ~/.zshrc
4733 :END:
4734
4735 #+begin_src sh
4736 # Bash-like navigation
4737 #export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
4738 #export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
4739 export WORDCHARS='*?[]~=&;!#$%^(){}<>'
4740 #ZLE_SPACE_SUFFIX_CHARS=$'|&'
4741
4742 #disable -r time       # disable shell reserved word
4743 #alias time='time -p'  # -p for POSIX output
4744
4745 # rehash if last command was pacaur or pacman
4746 # (so that zsh picks up changes in $PATH immediately)
4747 TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
4748
4749 #
4750 # User configuration sourced by interactive shells
4751 #
4752
4753 # Change default zim location
4754 export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
4755
4756 # Start zim
4757 [[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
4758
4759 ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
4760 #ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
4761
4762 setopt globdots
4763
4764 source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
4765 source ~/.zsh/zsh-autopair/autopair.zsh
4766
4767
4768 ### fzf ###
4769
4770 source /usr/share/fzf/key-bindings.zsh
4771 source /usr/share/fzf/completion.zsh
4772
4773 # Accept history selection instead of putting it on
4774 # the command line
4775 fzf-history-widget-accept() {
4776   fzf-history-widget
4777   zle accept-line
4778 }
4779 #zle     -N   fzf-history-widget-accept
4780 #bindkey '^R' fzf-history-widget-accept
4781
4782 # alt+c preview
4783 export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
4784
4785 ### fzf ###
4786
4787
4788 # aliases
4789 alias mpv="mpv --ytdl-format mp4"
4790 alias mv="mv -iv"
4791 alias cp="cp -iv"
4792 alias scl=systemctl
4793 alias jcl=journalctl
4794 alias m="mbsync -Va; getmail; notmuch new"
4795 alias best="youtube-dl -f best"
4796 alias nixx="ssh amin@nix.aminb.org"
4797 alias fence="ssh aminb@fencepost.gnu.org"
4798
4799 aur() {
4800    cd ~/usr/build
4801    git clone https://aur.archlinux.org/${1}.git
4802    cd ${1}
4803 }
4804
4805 # i-beam cursor
4806 echo -e "\033[5 q"
4807 #echo -e "\033[6 q"
4808 #+end_src
4809
4810 * Scripts
4811
4812 This section contains various useful scripts and the ones used by the
4813 programs above. For instance, =toggle-tablet= for switching to and
4814 from tablet mode on my X220T, =toggle-presentation-mode= for toggling
4815 Xfce's presentation mode which keeps the screen awake, and
4816 =rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
4817 exact brightness value.
4818
4819 ** rofi-light
4820 :PROPERTIES:
4821 :header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
4822 :END:
4823
4824 #+begin_src bash
4825 cur=$(light -G)
4826 val=$(rofi -dmenu -mesg "light    $cur" -p "light -S " -l 0 -width 12)
4827 light -S $val
4828 #+end_src
4829
4830 ** s (run sway)
4831 :PROPERTIES:
4832 :header-args+: :tangle ~/.local/bin/s :shebang "#!/bin/bash"
4833 :END:
4834
4835 #+begin_src bash
4836 export XKB_DEFAULT_OPTIONS=ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt
4837 export _JAVA_AWT_WM_NONREPARENTING=1
4838 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4839 light -Scrs "intel_backlight" 2
4840 source $HOME/.zprofile
4841 sway
4842 #+end_src
4843
4844 ** sway-ws-util
4845 :PROPERTIES:
4846 :header-args+: :tangle ~/.local/bin/sway-ws-util :shebang "#!/bin/bash"
4847 :END:
4848
4849 #+begin_src bash
4850 curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name')
4851 [[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1))
4852 [[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1))
4853 dest_ws=-1
4854 op=-1
4855
4856 if [ "$1" = "switch" ] || [ "$1" = "move" ]; then
4857   op="$1"
4858   if [ "$2" = "prev" ]; then
4859     dest_ws="$prev_ws"
4860   elif [ "$2" = "next" ]; then
4861     dest_ws="$next_ws"
4862   else
4863     echo "Usage: $0 $1 {prev|next}"
4864     exit 1
4865   fi
4866 else
4867   echo "Usage: $0 {switch|move} {prev|next} [follow]"
4868   exit 1
4869 fi
4870
4871 if [ "$op" = "switch" ]; then
4872   sway workspace "$dest_ws"
4873 elif [ "$op" = "move" ]; then
4874   sway move container to workspace "$dest_ws"
4875   if [ "$3" = "follow" ]; then
4876     sway workspace "$dest_ws"
4877   fi
4878 fi
4879 #+end_src
4880
4881 ** toggle-layout
4882 :PROPERTIES:
4883 :header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
4884 :END:
4885
4886 #+begin_src bash
4887 lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
4888
4889 if [ "$lang" = "us" ]; then
4890     setxkbmap ir
4891 else
4892     setxkbmap us
4893     # xmodmap $HOME/.Xmodmap
4894 fi
4895 #+end_src
4896
4897 ** toggle-presentation-mode
4898 :PROPERTIES:
4899 :header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
4900 :END:
4901
4902 #+begin_src bash
4903 xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
4904 #+end_src
4905
4906 ** toggle-tablet
4907 :PROPERTIES:
4908 :header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
4909 :END:
4910
4911 This script toggles between a 'normal' mode and a 'tablet' mode, doing
4912 a few things:
4913
4914 - rotates the screen using =xrandr=, so that rotating the physical
4915   display of my X220t would have the laptop's battery on the right
4916   hand side,
4917 - enables touch screen,
4918 - properly rotates the stylus pen and touch screen pointers, and
4919 - toggles between RGB and Vertical BGR sub-pixel order.
4920
4921 #+begin_src bash
4922 case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
4923     0)  # Screen is not rotated, we should rotate it right (90°)
4924            xrandr -o 3
4925            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
4926            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
4927            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
4928            xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
4929            ;;
4930     1)  # Currently top is rotated right, we should set it normal (0°)
4931           xrandr -o 0
4932           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
4933           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
4934           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
4935           xfconf-query -c xsettings -p /Xft/RGBA -s rgb
4936           ;;
4937     *)
4938            echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
4939            exit 1
4940            ;;
4941 esac
4942 #+end_src
4943
4944 ** unlock-def-gk.py
4945 :PROPERTIES:
4946 :header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
4947 :END:
4948
4949 #+begin_src python
4950 import gnomekeyring as gk
4951 # list_item_ids_sync('login')[0] == 1L
4952 gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
4953 #+end_src
4954
4955 ** wp
4956
4957 My little wallpaper changer script.
4958
4959 *** wp
4960 :PROPERTIES:
4961 :header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
4962 :END:
4963
4964 #+begin_src bash :tangle no
4965 export DISPLAY=:0
4966
4967 case "$1" in
4968   "day")
4969     feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
4970     ;;
4971   "night")
4972     feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
4973     ;;
4974   *)
4975     echo $"Usage: $0 {day|night}"
4976     exit 1
4977 esac
4978 #+end_src
4979
4980 *** wp-auto
4981 :PROPERTIES:
4982 :header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
4983 :END:
4984
4985 #+begin_src bash :tangle no
4986 SED=$(which sed)
4987 ROFI=$(which rofi)
4988
4989 export DISPLAY=:0
4990 HOUR=$(date +%H)
4991
4992 if [ -z "${SED}" ]
4993 then
4994     echo "Did not find 'sed', script cannot continue."
4995     exit 1
4996 fi
4997 if [ -z "${ROFI}" ]
4998 then
4999     echo "Did not find rofi, there is no point to continue."
5000     exit 1
5001 fi
5002
5003 ###
5004 # Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
5005 # Repeated calls should leave the config clean-ish
5006 ###
5007 function set_theme()
5008 {
5009     CDIR="${HOME}/.config/rofi/"
5010     if [ ! -d "${CDIR}" ]
5011     then
5012         mkdir -p ${CDIR}
5013     fi
5014     if [ -f "${CDIR}/config" ]
5015     then
5016         ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
5017     fi
5018     echo "rofi.theme: ${1}" >> "${CDIR}/config"
5019
5020 }
5021
5022 if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
5023     then
5024         feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5025         xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
5026         set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
5027     else
5028         feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5029         xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
5030         set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
5031 fi
5032 #+end_src
5033
5034 *** wp.service
5035 :PROPERTIES:
5036 :header-args+: :tangle ~/.config/systemd/user/wp.service
5037 :END:
5038
5039 #+begin_src conf :tangle no
5040 [Unit]
5041 Description=wallpaper service
5042
5043 [Service]
5044 Type=oneshot
5045 ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
5046 #+end_src
5047
5048 *** wp.timer
5049 :PROPERTIES:
5050 :header-args+: :tangle ~/.config/systemd/user/wp.timer
5051 :END:
5052
5053 #+begin_src conf :tangle no
5054 [Unit]
5055 [Unit]
5056 Description=wallpaper timer
5057
5058 [Timer]
5059 OnCalendar=07,21:00
5060 Unit=wp.service
5061 Persistent=true
5062
5063 [Install]
5064 WantedBy=timers.target
5065 #+end_src
5066
5067 ** zathura-sync.sh
5068 :PROPERTIES:
5069 :header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
5070 :END:
5071
5072 #+begin_src sh
5073 pos="$1"
5074 pdffile="$2"
5075 zathura --synctex-forward "$pos" "$pdffile" || \
5076     (
5077     zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
5078     sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
5079 #+end_src
5080 ** Fun :)
5081
5082 *** eat-em
5083 :PROPERTIES:
5084 :header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
5085 :END:
5086
5087 #+begin_src sh
5088 # Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5089 # [ESC] character in original post removed here.
5090
5091 # ANSI Color -- use these variables to easily have different color
5092 #    and format output. Make sure to output the reset sequence after
5093 #    colors (f = foreground, b = background), and use the 'off'
5094 #    feature for anything you turn on.
5095
5096 initializeANSI()
5097 {
5098  esc="$(echo -en '\e')"
5099
5100   blackf="${esc}[30m";   redf="${esc}[31m";    greenf="${esc}[32m"
5101   yellowf="${esc}[33m"   bluef="${esc}[34m";   purplef="${esc}[35m"
5102   cyanf="${esc}[36m";    whitef="${esc}[37m"
5103
5104   blackb="${esc}[40m";   redb="${esc}[41m";    greenb="${esc}[42m"
5105   yellowb="${esc}[43m"   blueb="${esc}[44m";   purpleb="${esc}[45m"
5106   cyanb="${esc}[46m";    whiteb="${esc}[47m"
5107
5108   boldon="${esc}[1m";    boldoff="${esc}[22m"
5109   italicson="${esc}[3m"; italicsoff="${esc}[23m"
5110   ulon="${esc}[4m";      uloff="${esc}[24m"
5111   invon="${esc}[7m";     invoff="${esc}[27m"
5112
5113   reset="${esc}[0m"
5114 }
5115
5116 # note in this first use that switching colors doesn't require a reset
5117 # first - the new color overrides the old one.
5118
5119 #clear
5120
5121 initializeANSI
5122
5123 cat << EOF
5124
5125  ${yellowf}  ▄███████▄${reset}   ${redf}  ▄██████▄${reset}    ${greenf}  ▄██████▄${reset}    ${bluef}  ▄██████▄${reset}    ${purplef}  ▄██████▄${reset}    ${cyanf}  ▄██████▄${reset}
5126  ${yellowf}▄█████████▀▀${reset}  ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset}  ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset}  ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset}  ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset}  ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5127  ${yellowf}███████▀${reset}      ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset}  ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset}  ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset}  ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset}  ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5128  ${yellowf}███████▄${reset}      ${redf}████████████${reset}  ${greenf}████████████${reset}  ${bluef}████████████${reset}  ${purplef}████████████${reset}  ${cyanf}████████████${reset}
5129  ${yellowf}▀█████████▄▄${reset}  ${redf}██▀██▀▀██▀██${reset}  ${greenf}██▀██▀▀██▀██${reset}  ${bluef}██▀██▀▀██▀██${reset}  ${purplef}██▀██▀▀██▀██${reset}  ${cyanf}██▀██▀▀██▀██${reset}
5130  ${yellowf}  ▀███████▀${reset}   ${redf}▀   ▀  ▀   ▀${reset}  ${greenf}▀   ▀  ▀   ▀${reset}  ${bluef}▀   ▀  ▀   ▀${reset}  ${purplef}▀   ▀  ▀   ▀${reset}  ${cyanf}▀   ▀  ▀   ▀${reset}
5131
5132  ${boldon}${yellowf}  ▄███████▄   ${redf}  ▄██████▄    ${greenf}  ▄██████▄    ${bluef}  ▄██████▄    ${purplef}  ▄██████▄    ${cyanf}  ▄██████▄${reset}
5133  ${boldon}${yellowf}▄█████████▀▀  ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄  ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄  ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄  ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄  ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5134  ${boldon}${yellowf}███████▀      ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███  ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███  ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███  ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███  ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5135  ${boldon}${yellowf}███████▄      ${redf}████████████  ${greenf}████████████  ${bluef}████████████  ${purplef}████████████  ${cyanf}████████████${reset}
5136  ${boldon}${yellowf}▀█████████▄▄  ${redf}██▀██▀▀██▀██  ${greenf}██▀██▀▀██▀██  ${bluef}██▀██▀▀██▀██  ${purplef}██▀██▀▀██▀██  ${cyanf}██▀██▀▀██▀██${reset}
5137  ${boldon}${yellowf}  ▀███████▀   ${redf}▀   ▀  ▀   ▀  ${greenf}▀   ▀  ▀   ▀  ${bluef}▀   ▀  ▀   ▀  ${purplef}▀   ▀  ▀   ▀  ${cyanf}▀   ▀  ▀   ▀${reset}
5138
5139 EOF
5140 #+end_src
5141
5142 *** invade-em
5143 :PROPERTIES:
5144 :header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
5145 :END:
5146
5147 #+begin_src bash
5148 #
5149 # ANSI color scheme script featuring Space Invaders
5150 #
5151 # Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5152 # Modified by lolilolicon
5153 #
5154
5155 f=3 b=4
5156 for j in f b; do
5157   for i in {0..7}; do
5158     printf -v $j$i %b "\e[${!j}${i}m"
5159   done
5160 done
5161 bld=$'\e[1m'
5162 rst=$'\e[0m'
5163
5164 cat << EOF
5165
5166  $f1  ▀▄   ▄▀     $f2 ▄▄▄████▄▄▄    $f3  ▄██▄     $f4  ▀▄   ▄▀     $f5 ▄▄▄████▄▄▄    $f6  ▄██▄  $rst
5167  $f1 ▄█▀███▀█▄    $f2███▀▀██▀▀███   $f3▄█▀██▀█▄   $f4 ▄█▀███▀█▄    $f5███▀▀██▀▀███   $f6▄█▀██▀█▄$rst
5168  $f1█▀███████▀█   $f2▀▀███▀▀███▀▀   $f3▀█▀██▀█▀   $f4█▀███████▀█   $f5▀▀███▀▀███▀▀   $f6▀█▀██▀█▀$rst
5169  $f1▀ ▀▄▄ ▄▄▀ ▀   $f2 ▀█▄ ▀▀ ▄█▀    $f3▀▄    ▄▀   $f4▀ ▀▄▄ ▄▄▀ ▀   $f5 ▀█▄ ▀▀ ▄█▀    $f6▀▄    ▄▀$rst
5170
5171  $bld$f1▄ ▀▄   ▄▀ ▄   $f2 ▄▄▄████▄▄▄    $f3  ▄██▄     $f4▄ ▀▄   ▄▀ ▄   $f5 ▄▄▄████▄▄▄    $f6  ▄██▄  $rst
5172  $bld$f1█▄█▀███▀█▄█   $f2███▀▀██▀▀███   $f3▄█▀██▀█▄   $f4█▄█▀███▀█▄█   $f5███▀▀██▀▀███   $f6▄█▀██▀█▄$rst
5173  $bld$f1▀█████████▀   $f2▀▀▀██▀▀██▀▀▀   $f3▀▀█▀▀█▀▀   $f4▀█████████▀   $f5▀▀▀██▀▀██▀▀▀   $f6▀▀█▀▀█▀▀$rst
5174  $bld$f1 ▄▀     ▀▄    $f2▄▄▀▀ ▀▀ ▀▀▄▄   $f3▄▀▄▀▀▄▀▄   $f4 ▄▀     ▀▄    $f5▄▄▀▀ ▀▀ ▀▀▄▄   $f6▄▀▄▀▀▄▀▄$rst
5175
5176
5177                                      $f7▌$rst
5178
5179                                    $f7▌$rst
5180
5181                               $f7    ▄█▄    $rst
5182                               $f7▄█████████▄$rst
5183                               $f7▀▀▀▀▀▀▀▀▀▀▀$rst
5184
5185 EOF
5186 #+end_src