git.shemshak.org - ~bandali/configs/blob - rc.org

   1 #+title: rc.org
   2 #+property: header-args :comments link :mkdirp yes :results silent
   3
   4 * About
   5
   6 This org file contains the configuration files of pretty much every
   7 program I use. The files are tangled (i.e. exported, or derived) from
   8 this file using =org-babel=.
   9
  10 Note: This file is best viewed inside Emacs with org mode.
  11
  12 * Configs
  13
  14 This section contains the configuration files (dotfiles) of various
  15 programs I use.
  16
  17 ** bspwm
  18
  19 *** bspwmrc
  20 :PROPERTIES:
  21 :header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
  22 :END:
  23
  24 #+begin_src sh :tangle no
  25 sxhkd &
  26 sh ~/.fehbg &
  27 xfce4-panel -d &
  28 compton &
  29 sleep 0.5 && pasystray --notify=all &
  30
  31 bspc monitor -d I II III IV V VI VII VIII IX X
  32 #bspc monitor eDP-1 -d I II III IV V
  33 #bspc monitor HDMI-1 -d VI VII VIII IX X
  34
  35 #bspc config border_width         2
  36 #bspc config window_gap           8
  37 bspc config window_gap           0
  38
  39 bspc config bottom_padding 26
  40
  41 bspc config split_ratio          0.52
  42 bspc config borderless_monocle   true
  43 bspc config gapless_monocle      true
  44 bspc config click_to_focus       button1
  45 bspc config directional_focus_tightness low
  46
  47 #bspc rule -a Firefox desktop='^1' follow=on
  48 bspc rule -a Nightly desktop='^1' follow=on
  49 bspc rule -a Emacs desktop='^2' state=tiled follow=on
  50 #bspc rule -a Chromium desktop='^4' follow=on
  51 bspc rule -a URxvt state=floating
  52 bspc rule -a URxvt:tiled state=tiled
  53 bspc rule -a Connman-gtk state=floating
  54 bspc rule -a Xfce4-panel state=floating
  55 bspc rule -a TelegramDesktop state=floating
  56 bspc rule -a Ec state=floating
  57 bspc rule -a Pavucontrol state=floating
  58 bspc rule -a Eog state=floating
  59 bspc rule -a Seahorse state=floating
  60 bspc rule -a mpv state=floating
  61 bspc rule -a Evince state=floating
  62 bspc rule -a Meld state=floating
  63 bspc rule -a Autokey-gtk state=floating
  64 bspc rule -a Mousepad state=floating
  65 bspc rule -a Wrapper-1.0 state=floating
  66 bspc rule -a File-roller state=floating
  67 bspc rule -a Gnome-disks state=floating
  68 bspc rule -a Termite state=floating
  69 bspc rule -a Termite:tiled state=tiled
  70 bspc rule -a Thunderbird:Calendar state=floating
  71 bspc rule -a Audacity state=floating
  72 bspc rule -a Proof state=floating # pvs x-show-proof
  73 bspc rule -a Nm-connection-editor state=floating
  74 bspc rule -a Wire state=floating
  75 bspc rule -a discord state=floating
  76 bspc rule -a X2goclient state=floating
  77 bspc rule -a SimpleScreenRecorder state=floating
  78 bspc rule -a Gimp state=floating
  79 bspc rule -a Wrapper-2.0 state=floating
  80 bspc rule -a Zathura state=tiled
  81 #+end_src
  82
  83 *** sxhkdrc
  84 :PROPERTIES:
  85 :header-args+: :tangle ~/.config/sxhkd/sxhkdrc
  86 :END:
  87
  88 #+begin_src conf :tangle no
  89 #
  90 # wm independent hotkeys
  91 #
  92
  93 # terminal emulator
  94 super + {_,shift} + Return
  95         urxvt{_, -name tiled}
  96
  97 #super + {_,shift} + Return
  98 #       termite{_, --name=tiled}
  99
 100 # program launcher
 101 super + space
 102         rofi -show run -display-run '> ' -display-window ' 🗔 '
 103
 104 super + alt + space
 105         xfce4-popup-whiskermenu
 106
 107 # window finder
 108 super + backslash
 109         rofi -show window  -display-run '> ' -display-window ' 🗔 '
 110
 111 # password manager
 112 alt + space
 113         rofi-pass
 114
 115 # firefox
 116 #super + r
 117 #       firefox
 118
 119 # chromium
 120 #super + c
 121 #       chromium -incognito
 122
 123 # emacs
 124 super + e
 125         emacs
 126
 127 # make sxhkd reload its configuration files:
 128 super + Escape
 129         pkill -USR1 -x sxhkd
 130
 131 # volume {up,down}
 132 XF86Audio{Raise,Lower}Volume
 133         pamixer --allow-boost --{in,de}crease 5
 134
 135 # mute
 136 XF86AudioMute
 137         pamixer --toggle-mute
 138
 139 XF86AudioMicMute
 140         pactl set-source-mute 1 toggle
 141
 142 # playback control
 143 XF86Audio{Play,Prev,Next}
 144         mpc {toggle,prev,next}
 145
 146 # lock the screen
 147 super + shift + q
 148         light-locker-command -l
 149
 150 # Toggle keyboard layout
 151 super + F7
 152         toggle-layout
 153
 154 # Toggle Xfce presentation mode
 155 XF86LaunchB
 156         toggle-presentation-mode
 157
 158 # monitor brightness
 159 XF86MonBrightness{Up,Down}
 160         light -{A,U} 5
 161
 162 super + apostrophe
 163         rofi-light
 164
 165 # keyboard brightness
 166 #XF86KbdBrightness{Up,Down}
 167 #       kbdlight {up,down}
 168
 169 XF86RotateWindows
 170         toggle-tablet
 171
 172 #
 173 # bspwm hotkeys
 174 #
 175
 176 # quit bspwm normally
 177 super + alt + Escape
 178         bspc quit
 179
 180 # close and kill
 181 super + {w,q}
 182         bspc node -{c,k}
 183
 184 # alternate between the tiled and monocle layout
 185 super + m
 186         bspc desktop -l next
 187
 188 # send the newest marked node to the newest preselected node
 189 super + y
 190         bspc node newest.marked.local -n newest.!automatic.local
 191
 192 # swap the current node and the biggest node
 193 super + g
 194         bspc node -s biggest
 195
 196 #
 197 # state/flags
 198 #
 199
 200 # set the window state
 201 super + {t,shift + t,s,f}
 202         bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
 203
 204 # set the node flags
 205 super + ctrl + {m,x,y,z}
 206         bspc node -g {marked,locked,sticky,private}
 207
 208 #
 209 # focus/swap
 210 #
 211
 212 # focus the node in the given direction
 213 super + {_,shift + }{h,j,k,l}
 214         bspc node -{f,s} {west,south,north,east}
 215
 216 # focus the node for the given path jump
 217 super + {p,b,comma,period}
 218         bspc node -f @{parent,brother,first,second}
 219
 220 # focus the next/previous node in the current desktop
 221 super + {_,shift + }c
 222         bspc node -f {next,prev}.local
 223
 224 # focus the next/previous desktop in the current monitor
 225 super + bracket{left,right}
 226         bspc desktop -f {prev,next}.local
 227
 228 # send to next/prev desktop
 229 super + shift + bracket{left,right}
 230         bspc node -d {prev,next} --follow
 231
 232 # focus the last node/desktop
 233 super + {grave,Tab}
 234         bspc {node,desktop} -f last
 235
 236 # focus the older or newer node in the focus history
 237 super + {o,i}
 238         bspc wm -h off; \
 239         bspc node {older,newer} -f; \
 240         bspc wm -h on
 241
 242 # focus or send to the given desktop
 243 super + {_,shift + }{1-9,0}
 244         bspc {desktop -f,node -d} '^{1-9,10}'
 245
 246 #
 247 # preselect
 248 #
 249
 250 # preselect the direction
 251 super + ctrl + {h,j,k,l}
 252         bspc node -p {west,south,north,east}
 253
 254 # preselect the ratio
 255 super + ctrl + {1-9}
 256         bspc node -o 0.{1-9}
 257
 258 # cancel the preselection for the focused node
 259 super + ctrl + space
 260         bspc node -p cancel
 261
 262 # cancel the preselection for the focused desktop
 263 super + ctrl + shift + space
 264         bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
 265
 266 #
 267 # move/resize
 268 #
 269
 270 # expand a window by moving one of its side outward
 271 super + alt + {h,j,k,l}
 272         bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
 273
 274 # contract a window by moving one of its side inward
 275 super + alt + shift + {h,j,k,l}
 276         bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
 277
 278 # move a floating window
 279 super + {Left,Down,Up,Right}
 280         bspc node -v {-20 0,0 20,0 -20,20 0}
 281
 282 #alt + bracket{left,right}
 283 #       xdotool key --clearmodifiers ctrl+Page_{Up,Down}
 284 #+end_src
 285
 286 ** compton
 287 :PROPERTIES:
 288 :header-args+: :tangle ~/.config/compton.conf
 289 :END:
 290
 291 #+begin_src conf :tangle no
 292 # Shadow
 293 shadow = false;                 # Enabled client-side shadows on windows.
 294 no-dock-shadow = true;          # Avoid drawing shadows on dock/panel windows.
 295 no-dnd-shadow = true;           # Don't draw shadows on DND windows.
 296 clear-shadow = true;            # Zero the part of the shadow's mask behind the
 297                                 # window. Fix some weirdness with ARGB windows.
 298 shadow-radius = 5;              # The blur radius for shadows. (default 12)
 299 shadow-offset-x = -5;           # The left offset for shadows. (default -15)
 300 shadow-offset-y = -5;           # The top offset for shadows. (default -15)
 301 # shadow-opacity = 0.7;         # The translucency for shadows. (default .75)
 302 # shadow-red = 0.0;             # Red color value of shadow. (0.0 - 1.0, defaults to 0)
 303 # shadow-green = 0.0;           # Green color value of shadow. (0.0 - 1.0, defaults to 0)
 304 # shadow-blue = 0.0;            # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
 305 shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ];    # Exclude conditions for shadows.
 306 # shadow-exclude = "n:e:Notification";
 307 #shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
 308 shadow-ignore-shaped = true;    # Avoid drawing shadow on all shaped windows
 309                                 # (see also: --detect-rounded-corners)
 310
 311 # Opacity
 312 menu-opacity = 1.0;                     # The opacity for menus. (default 1.0)
 313 #inactive-opacity = 0.9;                        # Default opacity of inactive windows. (0.0 - 1.0)
 314 # active-opacity = 0.8;                 # Default opacity for active windows. (0.0 - 1.0)
 315 frame-opacity = 1.0;                    # Opacity of window titlebars and borders. (0.1 - 1.0)
 316 # inactive-opacity-override = true;     # Let inactive opacity set by 'inactive-opacity' overrides
 317                                         # value of _NET_WM_OPACITY. Bad choice.
 318 alpha-step = 0.06;                      # XRender backend: Step size for alpha pictures. Increasing
 319                                         # it may result in less X resource usage,
 320                                         # Yet fading may look bad.
 321 #inactive-dim = 0.5;                    # Dim inactive windows. (0.0 - 1.0)
 322 #inactive-dim-fixed = true;             # Do not let dimness adjust based on window opacity.
 323 # blur-background = true;               # Blur background of transparent windows.
 324                                         # Bad performance with X Render backend.
 325                                         # GLX backend is preferred.
 326 # blur-background-frame = true;         # Blur background of opaque windows with transparent
 327                                         # frames as well.
 328 blur-background-fixed = true;           # Do not let blur radius adjust based on window opacity.
 329 blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
 330                                         # Exclude conditions for background blur.
 331
 332 # Fading
 333 fading = false;                 # Fade windows during opacity changes.
 334 fade-delta = 3;         # The time between steps in a fade in milliseconds. (default 10).
 335 fade-in-step = 0.03;            # Opacity change between steps while fading in. (default 0.028).
 336 fade-out-step = 0.03;           # Opacity change between steps while fading out. (default 0.03).
 337 # no-fading-openclose = true;   # Avoid fade windows in/out when opening/closing.
 338 fade-exclude = [ ];             # Exclude conditions for fading.
 339
 340 # Other
 341 backend = "glx"                 # Backend to use: "xrender" or "glx". GLX backend is typically
 342                                 # much faster but depends on a sane driver.
 343 mark-wmwin-focused = true;      # Try to detect WM windows and mark them as active.
 344 mark-ovredir-focused = true;    # Mark all non-WM but override-redirect windows active (e.g. menus).
 345 use-ewmh-active-win = true;     # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
 346                                 # instead of using FocusIn/Out events. Usually more reliable but
 347                                 # depends on a EWMH-compliant WM.
 348 detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
 349 detect-client-opacity = true;   # Detect _NET_WM_OPACITY on client windows, useful for window
 350                                 # managers not passing _NET_WM_OPACITY of client windows to frame
 351                                 # windows.
 352 refresh-rate = 0;               # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
 353 vsync = "drm";                  # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
 354                                 # See man page for more details.
 355 dbe = false;                    # Enable DBE painting mode. Rarely needed.
 356 paint-on-overlay = true;        # Painting on X Composite overlay window. Recommended.
 357 sw-opti = false;                # Limit compton to repaint at most once every 1 / refresh_rate.
 358                                 # Incompatible with certain VSync methods.
 359 unredir-if-possible = false;    # Unredirect all windows if a full-screen opaque window is
 360                                 # detected, to maximize performance for full-screen windows.
 361 focus-exclude = [ ];            # A list of conditions of windows that should always be considered
 362                                 # focused.
 363 detect-transient = true;        # Use WM_TRANSIENT_FOR to group windows, and consider windows in
 364                                 # the same group focused at the same time.
 365 detect-client-leader = true;    # Use WM_CLIENT_LEADER to group windows.
 366 invert-color-include = [ ];     # Conditions for windows to be painted with inverted color.
 367
 368 # GLX backend                   # GLX backend fine-tune options. See man page for more info.
 369 glx-no-stencil = true;          # Recommended.
 370 glx-copy-from-front = false;    # Useful with --glx-swap-method,
 371 # glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
 372 # glx-no-rebind-pixmap = true;  # Recommended if it works.
 373 glx-no-rebind-pixmap = true;    # Recommended if it works.
 374 #glx-swap-method = "4"; # See man page.
 375 glx-swap-method = "4";  # See man page.
 376
 377 # Window type settings
 378 wintypes:
 379 {
 380   tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
 381   menu = { shadow = false; };
 382   dropdown_menu = { shadow = false; };
 383   popup_menu =  { shadow = false; };
 384   utility =  { shadow = false; };
 385   # fade: Fade the particular type of windows.
 386   # shadow: Give those windows shadow
 387   # opacity: Default opacity for the type of windows.
 388   # focus: Whether to always consider windows of this type focused.
 389 };
 390 #+end_src
 391
 392 ** Dunst
 393 :PROPERTIES:
 394 :header-args+: :tangle ~/.config/dunst/dunstrc
 395 :END:
 396
 397 #+begin_src conf
 398 [global]
 399 #font = Ubuntu Mono 10.5
 400 font = Inconsolata 11
 401
 402 # Path to default icons.
 403 icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
 404
 405 icon_position = left
 406 # <b>bold</b>
 407 # <i>italic</i>
 408 # <s>strikethrough<s/>
 409 # <u>underline</u>
 410 markup = full
 411 # The format of the message. Possible variables are:
 412 #   %a  appname
 413 #   %s  summary
 414 #   %b  body
 415 #   %i  iconname (including its path)
 416 #   %I  iconname (without its path)
 417 #   %p  progress value if set ([  0%] to [100%]) or nothing
 418 # Markup is allowed
 419 format = "<b>%s</b>\n%b"
 420 # Sort messages by urgency
 421 sort = yes
 422 # Show how many messages are currently hidden (because of geometry)
 423 indicate_hiddenl= no
 424 # Alignment of message text.
 425 # Possible values are "left", "center" and "right"
 426 alignment = center
 427 # The frequency with wich text that is longer than the notification
 428 # window allows bounces back and forth.
 429 # This option conflicts with 'word_wrap'.
 430 # Set to 0 to disable
 431 bounce_freq = 3
 432 # show age of message if message is older than show_age_threshold seconds.
 433 # set to -1 to disable
 434 show_age_threshold = -1
 435 # split notifications into multiple lines if they don't fit into geometry
 436 word_wrap = yes
 437 # ignore newlines '\n' in notifications
 438 ignore_newline = no
 439 # The geometry of the message window.
 440 # geometry [{width}]x{height}][+/-{x}+/-{y}]
 441 # The height is measured in number of notifications everything else in pixels. If the width
 442 # is omitted but the height is given ("-geometry x2"), the message window
 443 # expands over the whole screen (dmenu-like). If width is 0,
 444 # the window expands to the longest message displayed.
 445 # A positive x is measured from the left, a negative from the
 446 # right side of the screen.  Y is measured from the top and down respectevly.
 447 # The width can be negative. In this case the actual width is the
 448 # screen width minus the width defined in within the geometry option.
 449 #geometry = "410x12-12+12"
 450 #geometry = "0x0-30-30"
 451 geometry = "260x12-30-30"
 452 # The transparency of the window. range: [0; 100]
 453 # This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
 454 transparency = 0
 455 # Don't remove messages, if the user is idle (no mouse or keyboard input)
 456 # for longer than idle_threshold seconds.
 457 # Set to 0 to disable.
 458 idle_threshold = 120
 459 # Which monitor should the notifications be displayed on.
 460 monitor = 0
 461 # Display notification on focused monitor. Possible modes are:
 462 # mouse: follow mouse pointer
 463 # keyboard: follow window with keyboard focus
 464 # none: don't follow anything
 465 #
 466 # "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
 467 # This should be the case for almost all modern windowmanagers.
 468 #
 469 # If this option is set to mouse or keyboard, the monitor option will be
 470 # ignored.
 471 follow = keyboard
 472 # should a notification popped up from history be sticky or
 473 # timeout as if it would normally do.
 474 sticky_history = yes
 475 # The height of a single line. If the height is smaller than the font height,
 476 # it will get raised to the font height.
 477 # This adds empty space above and under the text.
 478 line_height = 0
 479
 480 show_indicators = yes
 481
 482 # Draw a line of 'separatpr_height' pixel height between two notifications.
 483 # Set to 0 to disable
 484 separator_height = 3
 485 # padding between text and separator
 486 padding = 8
 487 # horizontal padding
 488 horizontal_padding = 8
 489 # Define a color for the separator.
 490 # possible values are:
 491 #  * auto: dunst tries to find a color fitting to the background
 492 #  * foreground: use the same color as the foreground
 493 #  * frame: use the same color as the frame.
 494 #  * anything else will be interpreted as a X color
 495 separator_color = foreground
 496 # print a notification on startup
 497 # This is mainly for error detection, since dbus (re-)starts dunst
 498 # automatically after a crash.
 499 startup_notification = false
 500 # dmenu path
 501 #dmenu = /usr/bin/dmenu -p dunst:
 502 dmenu = /usr/bin/rofi -dmenu -p dunst:
 503 # browser for opening urls in context menu
 504 browser = /usr/bin/firefox -new-tab
 505 [frame]
 506 width = 0
 507 color = "#377222"
 508 [shortcuts]
 509 # shortcuts are specified as [modifier+][modifier+]...key
 510 # available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
 511 # and 'mod4' (windows-key)
 512 # xev might be helpful to find names for keys
 513 # close notification
 514 close = ctrl+space
 515 # close all notifications
 516 close_all = ctrl+shift+space
 517 # redisplay last message(s)
 518 # On the US keyboard layout 'grave' is normally above TAB and left of '1'.
 519 history = ctrl+shift+h
 520 # context menu
 521 context = ctrl+shift+period
 522 [urgency_low]
 523 # IMPORTANT: colors have to be defined in quotation marks.
 524 # Otherwise the '#' and following  would be interpreted as a comment.
 525 background = "#1d2a30"
 526 foreground = "#71c2af"
 527 timeout = 3
 528 [urgency_normal]
 529 background = "#1d2a30"
 530 foreground = "#71c2af"
 531 timeout = 0
 532 [urgency_critical]
 533 background = "#1d2a30"
 534 foreground = "#ff9982"
 535 timeout = 0
 536
 537 # Every section that isn't one of the above is interpreted as a rules
 538 # to override settings for certain messages.
 539 # Messages can be matched by 'appname', 'summary', 'body' or 'icon'
 540 # and you can override the 'timeout', 'urgency', 'foreground', 'background'
 541 # and 'format'.
 542 # Shell-like globbing will get expanded.
 543 #
 544 # SCRIPTING
 545 # you can specify a script that gets run when the rule matches by setting
 546 # the 'script' option.
 547 # The script will be called as follows:
 548 # script appname summary body icon urgency
 549 # where urgency can be "LOW", "NORMAL" or "CRITICAL".
 550 #
 551 # NOTE: if you don't want a notification to be displayed, set the format to ""
 552 # NOTE: It might be helpful to run dunst -print in a terminal in order to find
 553 # fitting options for rules.
 554 #[espeak]
 555 #    summary = "*"
 556 #    script = dunst_espeak.sh
 557 #[script-test]
 558 #    summary = "*script*"
 559 #    script = dunst_test.sh
 560 #[ignore]
 561 ## This notification will not be displayed
 562 #    summary = "foobar"
 563 #    format = ""
 564 #[signed_on]
 565 #    appname = Pidgin
 566 #    summary = "*signed on*"
 567 #    urgency = low
 568 #
 569 #[signed_off]
 570 #    appname = Pidgin
 571 #    summary = *signed off*
 572 #    urgency = low
 573 #
 574 #[says]
 575 #    appname = Pidgin
 576 #    summary = *says*
 577 #    urgency = critical
 578 #
 579 #[twitter]
 580 #    appname = Pidgin
 581 #    summary = *twitter.com*
 582 #    urgency = normal
 583 #
 584 [xfpm-backlight]
 585     summary = *Brightness*
 586     urgency = low
 587 #+end_src
 588
 589 ** Fontconfig
 590 :PROPERTIES:
 591 :header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
 592 :END:
 593
 594 #+begin_src xml
 595 <?xml version="1.0"?>
 596 <!DOCTYPE fontconfig SYSTEM "fonts.dtd">
 597 <fontconfig>
 598  <match target="font">
 599   <edit mode="assign" name="rgba">
 600    <const>rgb</const>
 601   </edit>
 602  </match>
 603  <match target="font">
 604   <edit mode="assign" name="hinting">
 605    <bool>true</bool>
 606   </edit>
 607  </match>
 608  <match target="font">
 609   <edit mode="assign" name="hintstyle">
 610    <const>hintslight</const>
 611   </edit>
 612  </match>
 613  <match target="font">
 614   <edit mode="assign" name="antialias">
 615    <bool>true</bool>
 616   </edit>
 617  </match>
 618  <match target="font">
 619   <edit mode="assign" name="lcdfilter">
 620    <const>lcddefault</const>
 621   </edit>
 622  </match>
 623  <dir>~/.fonts</dir>
 624
 625  <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
 626  <alias binding="same">
 627   <family>Helvetica</family>
 628   <accept>
 629    <family>Liberation Sans</family>
 630   </accept>
 631 </alias>
 632 </fontconfig>
 633 #+end_src
 634
 635 ** Git
 636
 637 *** gitconfig
 638 :PROPERTIES:
 639 :header-args+: :tangle ~/.gitconfig
 640 :END:
 641
 642 **** user
 643 #+begin_src conf
 644 [user]
 645     name = Amin Bandali
 646     email = mab@gnu.org
 647     signingkey = 4E05246AB0BF7FFB
 648 #+end_src
 649
 650 **** signing
 651 #+begin_src conf
 652 [commit]
 653     gpgsign = true
 654 # [format]
 655 #     signoff = true
 656 #+end_src
 657
 658 **** core
 659 #+begin_src conf
 660 [core]
 661     autocrlf = input  # CRLF -> LF on commit
 662     editor = emacsclient -t
 663     excludesfile = ~/.gitignore_global
 664     pager = "less"
 665 #+end_src
 666
 667 **** gpg
 668 #+begin_src conf
 669 [gpg]
 670     program = gpg2
 671 #+end_src
 672
 673 **** alias
 674 #+begin_src conf
 675 [alias]
 676     git = !exec git  # handle nested git calls, e.g. git git status
 677     aliases = config --get-regexp '^alias\\.'
 678     a = add
 679     s = status
 680     sl = status --long
 681     c = checkout
 682     cb = checkout -b
 683     b = branch
 684     r = rebase
 685     p = pull
 686     pr = pull --rebase
 687     ps = push
 688     psf = push --force
 689     nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f"
 690     nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f"
 691 #+end_src
 692
 693 **** color
 694 #+begin_src conf
 695 [color]
 696     ui = auto
 697 [color "status"]
 698     added = green bold
 699     changed = red bold
 700     untracked = red bold
 701 [color "branch"]
 702     current = green bold
 703     remote = magenta bold
 704 [color "diff"]
 705     new = green bold
 706     old = red bold
 707 #+end_src
 708
 709 **** status
 710 #+begin_src conf
 711 [status]
 712     # showUntrackedFiles = all
 713     short=true
 714     branch=true
 715 #+end_src
 716
 717 **** github
 718 #+begin_src conf
 719 [github]
 720         user = aminb
 721 #+end_src
 722
 723 **** send-email
 724 #+begin_src conf
 725 [sendemail]
 726         smtpuser = aminb
 727         smtpserver = fencepost.gnu.org
 728         smtpserverport = 587
 729         smtpencryption = tls
 730         annotate = yes
 731 #+end_src
 732
 733 *** gitignore
 734 :PROPERTIES:
 735 :header-args+: :tangle ~/.gitignore_global
 736 :END:
 737
 738 #+begin_src conf
 739 *.orig
 740 *.py[co]
 741 *.sublime-workspace
 742 *~
 743 .DS_Store
 744 *.elc
 745 *-autoloads.el
 746 #+end_src
 747
 748 ** [[https://github.com/Leinnan/i3gs][i3gs]]
 749 :PROPERTIES:
 750 :header-args+: :tangle ~/.config/i3gs/config
 751 :END:
 752
 753 #+begin_src conf :comments none
 754 borders_width=0 0 2 0
 755 separator_width=10
 756
 757 #[mpd]
 758 #preset=MPD
 759 #title=<span weight='heavy' fgcolor='#7FDBFF'> </span>
 760 #borders_color=#7FDBFF
 761
 762 [ram]
 763 preset=RAM
 764 title=<span weight='heavy' fgcolor='#3D9970'> </span>
 765 borders_color=#3D9970
 766
 767 #[cpu]
 768 #preset=CPU
 769 #title=<span weight='heavy' fgcolor='#2ECC40'> </span>
 770 #borders_color=#2ECC40
 771
 772 #[hdd]
 773 #preset=HDD
 774 #title=<span weight='heavy' fgcolor='#01FF70'> </span>
 775 #borders_color=#01FF70
 776
 777 [volume]
 778 command=volume-info
 779 title=<span weight='heavy' fgcolor='#7FDBFF'></span>
 780 borders_color=#7FDBFF
 781
 782 [battery]
 783 preset=BAT
 784 command=battery-percentage-time
 785 title=<span weight='heavy' fgcolor='#39CCCC'> </span>
 786 borders_color=#39CCCC
 787
 788 [wifi]
 789 preset=WIFI
 790 title=<span weight='heavy' fgcolor='#01FF70'> </span>
 791 borders_color=#01FF70
 792
 793 [date]
 794 preset=DATE
 795 command=date '+%-I:%M, %a %b %d '
 796 title=<span weight='heavy' fgcolor='#FFDC00'> </span>
 797 borders_color=#FFDC00
 798 separator_width=0
 799 #+end_src
 800 ** Latexmk
 801 :PROPERTIES:
 802 :header-args+: :tangle ~/.latexmkrc
 803 :END:
 804
 805 #+begin_src conf
 806 $pdf_previewer = "start zathura %O %S";
 807 $clean_ext = "aux out";
 808
 809 # $pdf_update_method = 4;
 810 # $pdf_update_command = "zathura %O %S";
 811
 812 # Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
 813 # by Ctrl+click in the PDF.
 814 # Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
 815 # editor.
 816 # $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
 817 #+end_src
 818
 819 ** libinput
 820
 821 Improve XPS 15 9560's touchpad experience.
 822
 823 # begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
 824 #+begin_src conf :tangle no
 825 Section "InputClass"
 826     Identifier "libinput touchpad catchall"
 827     Driver "libinput"
 828     MatchIsTouchpad "on"
 829     Option "ClickMethod" "clickfinger"
 830     Option "NaturalScrolling" "true"
 831     Option "Tapping" "on"
 832     Option "TappingButtonMap" "lrm"
 833 EndSection
 834 #+end_src
 835
 836 ** getmail
 837
 838 *** getmailrc
 839 :PROPERTIES:
 840 :header-args+: :tangle ~/.getmail/getmailrc
 841 :END:
 842
 843 #+begin_src conf
 844 [retriever]
 845 type = SimplePOP3SSLRetriever
 846 server = fencepost.gnu.org
 847 username = aminb
 848 password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
 849 port = 995
 850 use_apop = True
 851
 852 [destination]
 853 type = Maildir
 854 path = ~/mail/gnu/Inbox/
 855
 856 [options]
 857 delete = True
 858 #+end_src
 859
 860 *** getmail.service
 861 :PROPERTIES:
 862 :header-args+: :tangle ~/.config/systemd/user/getmail.service
 863 :END:
 864
 865 #+begin_src conf :tangle no
 866 [Unit]
 867 Description=getmail service
 868
 869 [Service]
 870 Type=oneshot
 871 ExecStart=/usr/bin/getmail
 872 StandardOutput=syslog
 873 StandardError=syslog
 874 #+end_src
 875
 876 *** getmail.timer
 877 :PROPERTIES:
 878 :header-args+: :tangle ~/.config/systemd/user/getmail.timer
 879 :END:
 880
 881 #+begin_src conf :tangle no
 882 [Unit]
 883 Description=getmail timer
 884
 885 [Timer]
 886 OnCalendar=*:0/30
 887 Persistent=true
 888 Unit=getmail.service
 889
 890 [Install]
 891 WantedBy=timers.target
 892 #+end_src
 893
 894 ** GnuPG
 895 :PROPERTIES:
 896 :header-args+: :tangle ~/.gnupg/gpg-agent.conf
 897 :END:
 898
 899 #+begin_src conf
 900 default-cache-ttl 43200
 901 max-cache-ttl 43200
 902
 903 default-cache-ttl-ssh 10800
 904 max-cache-ttl-ssh 10800
 905
 906 # pinentry-program /usr/bin/pinentry-qt
 907 #+end_src
 908
 909 ** GTK
 910
 911 *** gtk-2.0
 912 :PROPERTIES:
 913 :header-args+: :tangle ~/.gtkrc-2.0
 914 :END:
 915
 916 #+begin_src conf
 917 gtk-theme-name="Greybird"
 918 gtk-icon-theme-name="Paper"
 919 gtk-font-name="Ubuntu 10"
 920 gtk-menu-images=0
 921 # gtk-key-theme-name = "Emacs"
 922 #+end_src
 923
 924 *** gtk-3.0
 925 :PROPERTIES:
 926 :header-args+: :tangle ~/.config/gtk-3.0/settings.ini
 927 :END:
 928
 929 #+begin_src conf :tangle no
 930 [Settings]
 931 gtk-icon-theme-name = Paper
 932 # gtk-theme-name = Adwaita
 933
 934 gtk-theme-name = Greybird
 935 # gtk-theme-name = Arc-Darker
 936 # gtk-theme-name = Numix-ArchBlue
 937
 938 gtk-font-name = Ubuntu 10
 939 # gtk-key-theme-name = Emacs
 940 #+end_src
 941
 942 ** isync
 943
 944 *** mbsyncrc
 945 :PROPERTIES:
 946 :header-args+: :tangle ~/.mbsyncrc
 947 :END:
 948
 949 #+begin_src conf
 950 # Global defaults
 951 CopyArrivalDate yes
 952
 953 ######
 954 IMAPAccount amin
 955 Host nix.aminb.org
 956 User amin@aminb.org
 957 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
 958 SSLType IMAPS
 959
 960 IMAPStore amin-remote
 961 Account amin
 962
 963 MaildirStore amin-local
 964 Path ~/mail/amin/
 965 Inbox ~/mail/amin/Inbox
 966 SubFolders Verbatim
 967
 968 Channel amin
 969 Master :amin-remote:
 970 Slave :amin-local:
 971 Patterns * !dovecot*
 972 Create Both
 973 SyncState *
 974
 975 ######
 976 IMAPAccount uwaterloo
 977 Host connect.uwaterloo.ca
 978 User abandali
 979 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
 980 SSLType IMAPS
 981
 982 IMAPStore uwaterloo-remote
 983 Account uwaterloo
 984
 985 MaildirStore uwaterloo-local
 986 Path ~/mail/uwaterloo/
 987 Inbox ~/mail/uwaterloo/Inbox
 988 SubFolders Verbatim
 989
 990 Channel uwaterloo
 991 Master :uwaterloo-remote:
 992 Slave :uwaterloo-local:
 993 Patterns * !dovecot*
 994 Create Both
 995 SyncState *
 996 #+end_src
 997
 998 *** mbsync.service
 999 :PROPERTIES:
1000 :header-args+: :tangle ~/.config/systemd/user/mbsync.service
1001 :END:
1002
1003 #+begin_src conf :tangle no
1004 [Unit]
1005 Description=mbsync service
1006
1007 [Service]
1008 Type=oneshot
1009 ExecStart=/usr/bin/mbsync -Va
1010 StandardOutput=syslog
1011 StandardError=syslog
1012 #+end_src
1013
1014 *** mbsync.timer
1015 :PROPERTIES:
1016 :header-args+: :tangle ~/.config/systemd/user/mbsync.timer
1017 :END:
1018
1019 #+begin_src conf :tangle no
1020 [Unit]
1021 Description=mbsync timer
1022
1023 [Timer]
1024 OnCalendar=*:0/15
1025 Persistent=true
1026 Unit=mbsync.service
1027
1028 [Install]
1029 WantedBy=timers.target
1030 #+end_src
1031
1032 ** mpd
1033 :PROPERTIES:
1034 :header-args+: :tangle ~/.config/mpd/mpd.conf
1035 :END:
1036
1037 #+begin_src conf
1038 # An example configuration file for MPD.
1039 # Read the user manual for documentation: http://www.musicpd.org/doc/user/
1040
1041
1042 # Files and directories #######################################################
1043 #
1044 # This setting controls the top directory which MPD will search to discover the
1045 # available audio files and add them to the daemon's online database. This
1046 # setting defaults to the XDG directory, otherwise the music directory will be
1047 # be disabled and audio files will only be accepted over ipc socket (using
1048 # file:// protocol) or streaming files over an accepted protocol.
1049 #
1050 music_directory         "~/usr/music"
1051 #
1052 # This setting sets the MPD internal playlist directory. The purpose of this
1053 # directory is storage for playlists created by MPD. The server will use
1054 # playlist files not created by the server but only if they are in the MPD
1055 # format. This setting defaults to playlist saving being disabled.
1056 #
1057 playlist_directory              "~/.mpd/playlists"
1058 #
1059 # This setting sets the location of the MPD database. This file is used to
1060 # load the database at server start up and store the database while the
1061 # server is not up. This setting defaults to disabled which will allow
1062 # MPD to accept files over ipc socket (using file:// protocol) or streaming
1063 # files over an accepted protocol.
1064 #
1065 db_file                 "~/.mpd/database"
1066 #
1067 # These settings are the locations for the daemon log files for the daemon.
1068 # These logs are great for troubleshooting, depending on your log_level
1069 # settings.
1070 #
1071 # The special value "syslog" makes MPD use the local syslog daemon. This
1072 # setting defaults to logging to syslog, otherwise logging is disabled.
1073 #
1074 log_file                        "~/.mpd/log"
1075 #
1076 # This setting sets the location of the file which stores the process ID
1077 # for use of mpd --kill and some init scripts. This setting is disabled by
1078 # default and the pid file will not be stored.
1079 #
1080 pid_file                        "~/.mpd/pid"
1081 #
1082 # This setting sets the location of the file which contains information about
1083 # most variables to get MPD back into the same general shape it was in before
1084 # it was brought down. This setting is disabled by default and the server
1085 # state will be reset on server start up.
1086 #
1087 state_file                      "~/.mpd/state"
1088 #
1089 # The location of the sticker database.  This is a database which
1090 # manages dynamic information attached to songs.
1091 #
1092 sticker_file                    "~/.mpd/sticker.sql"
1093 #
1094 ###############################################################################
1095
1096
1097 # General music daemon options ################################################
1098 #
1099 # This setting specifies the user that MPD will run as. MPD should never run as
1100 # root and you may use this setting to make MPD change its user ID after
1101 # initialization. This setting is disabled by default and MPD is run as the
1102 # current user.
1103 #
1104 #user                           "nobody"
1105 #
1106 # This setting specifies the group that MPD will run as. If not specified
1107 # primary group of user specified with "user" setting will be used (if set).
1108 # This is useful if MPD needs to be a member of group such as "audio" to
1109 # have permission to use sound card.
1110 #
1111 #group                          "nogroup"
1112 #
1113 # This setting sets the address for the daemon to listen on. Careful attention
1114 # should be paid if this is assigned to anything other then the default, any.
1115 # This setting can deny access to control of the daemon. Not effective if
1116 # systemd socket activiation is in use.
1117 #
1118 # For network
1119 #bind_to_address                "any"
1120 #
1121 # And for Unix Socket
1122 #bind_to_address                "~/.mpd/socket"
1123 #
1124 # This setting is the TCP port that is desired for the daemon to get assigned
1125 # to.
1126 #
1127 #port                           "6600"
1128 #
1129 # This setting controls the type of information which is logged. Available
1130 # setting arguments are "default", "secure" or "verbose". The "verbose" setting
1131 # argument is recommended for troubleshooting, though can quickly stretch
1132 # available resources on limited hardware storage.
1133 #
1134 #log_level                      "default"
1135 #
1136 # If you have a problem with your MP3s ending abruptly it is recommended that
1137 # you set this argument to "no" to attempt to fix the problem. If this solves
1138 # the problem, it is highly recommended to fix the MP3 files with vbrfix
1139 # (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
1140 # point gapless MP3 playback can be enabled.
1141 #
1142 #gapless_mp3_playback                   "yes"
1143 #
1144 # Setting "restore_paused" to "yes" puts MPD into pause mode instead
1145 # of starting playback after startup.
1146 #
1147 #restore_paused "no"
1148 #
1149 # This setting enables MPD to create playlists in a format usable by other
1150 # music players.
1151 #
1152 #save_absolute_paths_in_playlists       "no"
1153 #
1154 # This setting defines a list of tag types that will be extracted during the
1155 # audio file discovery process. The complete list of possible values can be
1156 # found in the user manual.
1157 #metadata_to_use        "artist,album,title,track,name,genre,date,composer,performer,disc"
1158 #
1159 # This setting enables automatic update of MPD's database when files in
1160 # music_directory are changed.
1161 #
1162 #auto_update    "yes"
1163 #
1164 # Limit the depth of the directories being watched, 0 means only watch
1165 # the music directory itself.  There is no limit by default.
1166 #
1167 #auto_update_depth "3"
1168 #
1169 ###############################################################################
1170
1171
1172 # Symbolic link behavior ######################################################
1173 #
1174 # If this setting is set to "yes", MPD will discover audio files by following
1175 # symbolic links outside of the configured music_directory.
1176 #
1177 #follow_outside_symlinks        "yes"
1178 #
1179 # If this setting is set to "yes", MPD will discover audio files by following
1180 # symbolic links inside of the configured music_directory.
1181 #
1182 #follow_inside_symlinks         "yes"
1183 #
1184 ###############################################################################
1185
1186
1187 # Zeroconf / Avahi Service Discovery ##########################################
1188 #
1189 # If this setting is set to "yes", service information will be published with
1190 # Zeroconf / Avahi.
1191 #
1192 #zeroconf_enabled               "yes"
1193 #
1194 # The argument to this setting will be the Zeroconf / Avahi unique name for
1195 # this MPD server on the network.
1196 #
1197 #zeroconf_name                  "Music Player"
1198 #
1199 ###############################################################################
1200
1201
1202 # Permissions #################################################################
1203 #
1204 # If this setting is set, MPD will require password authorization. The password
1205 # setting can be specified multiple times for different password profiles.
1206 #
1207 #password                        "password@read,add,control,admin"
1208 #
1209 # This setting specifies the permissions a user has who has not yet logged in.
1210 #
1211 #default_permissions             "read,add,control,admin"
1212 #
1213 ###############################################################################
1214
1215
1216 # Database #######################################################################
1217 #
1218
1219 #database {
1220 #       plugin "proxy"
1221 #       host "other.mpd.host"
1222 #       port "6600"
1223 #}
1224
1225 # Input #######################################################################
1226 #
1227
1228 input {
1229         plugin "curl"
1230 #       proxy "proxy.isp.com:8080"
1231 #       proxy_user "user"
1232 #       proxy_password "password"
1233 }
1234
1235 #
1236 ###############################################################################
1237
1238 # Audio Output ################################################################
1239 #
1240
1241 audio_output {
1242     type    "pulse"
1243     name    "pulse audio"
1244 }
1245
1246 audio_output {
1247     type    "fifo"
1248     name    "my_fifo"
1249     path    "/tmp/mpd.fifo"
1250     format  "44100:16:2"
1251 }
1252
1253 # MPD supports various audio output types, as well as playing through multiple
1254 # audio outputs at the same time, through multiple audio_output settings
1255 # blocks. Setting this block is optional, though the server will only attempt
1256 # autodetection for one sound card.
1257 #
1258 # An example of an ALSA output:
1259 #
1260 #audio_output {
1261 #       type            "alsa"
1262 #       name            "My ALSA Device"
1263 ##      device          "hw:0,0"        # optional
1264 ##      mixer_type      "hardware"      # optional
1265 ##      mixer_device    "default"       # optional
1266 ##      mixer_control   "PCM"           # optional
1267 ##      mixer_index     "0"             # optional
1268 #}
1269 #
1270 # An example of an OSS output:
1271 #
1272 #audio_output {
1273 #       type            "oss"
1274 #       name            "My OSS Device"
1275 ##      device          "/dev/dsp"      # optional
1276 ##      mixer_type      "hardware"      # optional
1277 ##      mixer_device    "/dev/mixer"    # optional
1278 ##      mixer_control   "PCM"           # optional
1279 #}
1280 #
1281 # An example of a shout output (for streaming to Icecast):
1282 #
1283 #audio_output {
1284 #       type            "shout"
1285 #       encoder         "vorbis"                # optional
1286 #       name            "My Shout Stream"
1287 #       host            "localhost"
1288 #       port            "8000"
1289 #       mount           "/mpd.ogg"
1290 #       password        "hackme"
1291 #       quality         "5.0"
1292 #       bitrate         "128"
1293 #       format          "44100:16:1"
1294 ##      protocol        "icecast2"              # optional
1295 ##      user            "source"                # optional
1296 ##      description     "My Stream Description" # optional
1297 ##      url             "http://example.com"    # optional
1298 ##      genre           "jazz"                  # optional
1299 ##      public          "no"                    # optional
1300 ##      timeout         "2"                     # optional
1301 ##      mixer_type      "software"              # optional
1302 #}
1303 #
1304 # An example of a recorder output:
1305 #
1306 #audio_output {
1307 #       type            "recorder"
1308 #       name            "My recorder"
1309 #       encoder         "vorbis"                # optional, vorbis or lame
1310 #       path            "/var/lib/mpd/recorder/mpd.ogg"
1311 ##      quality         "5.0"                   # do not define if bitrate is defined
1312 #       bitrate         "128"                   # do not define if quality is defined
1313 #       format          "44100:16:1"
1314 #}
1315 #
1316 # An example of a httpd output (built-in HTTP streaming server):
1317 #
1318 #audio_output {
1319 #       type            "httpd"
1320 #       name            "My HTTP Stream"
1321 #       encoder         "vorbis"                # optional, vorbis or lame
1322 #       port            "8000"
1323 #       bind_to_address "0.0.0.0"               # optional, IPv4 or IPv6
1324 ##      quality         "5.0"                   # do not define if bitrate is defined
1325 #       bitrate         "128"                   # do not define if quality is defined
1326 #       format          "44100:16:1"
1327 #       max_clients     "0"                     # optional 0=no limit
1328 #}
1329 #
1330 # An example of a pulseaudio output (streaming to a remote pulseaudio server)
1331 #
1332 #audio_output {
1333 #       type            "pulse"
1334 #       name            "My Pulse Output"
1335 ##      server          "remote_server"         # optional
1336 ##      sink            "remote_server_sink"    # optional
1337 #}
1338 #
1339 # An example of a winmm output (Windows multimedia API).
1340 #
1341 #audio_output {
1342 #       type            "winmm"
1343 #       name            "My WinMM output"
1344 ##      device          "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1345 #               or
1346 ##      device          "0"             # optional
1347 ##      mixer_type      "hardware"      # optional
1348 #}
1349 #
1350 # An example of an openal output.
1351 #
1352 #audio_output {
1353 #       type            "openal"
1354 #       name            "My OpenAL output"
1355 ##      device          "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1356 #}
1357 #
1358 # An example of an sndio output.
1359 #
1360 #audio_output {
1361 #       type            "sndio"
1362 #       name            "sndio output"
1363 #       mixer_type      "software"
1364 #}
1365 #
1366 # An example of an OS X output:
1367 #
1368 #audio_output {
1369 #       type            "osx"
1370 #       name            "My OS X Device"
1371 ##      device          "Built-in Output"       # optional
1372 ##      channel_map      "-1,-1,0,1"    # optional
1373 #}
1374 #
1375 ## Example "pipe" output:
1376 #
1377 #audio_output {
1378 #       type            "pipe"
1379 #       name            "my pipe"
1380 #       command         "aplay -f cd 2>/dev/null"
1381 ## Or if you're want to use AudioCompress
1382 #       command         "AudioCompress -m | aplay -f cd 2>/dev/null"
1383 ## Or to send raw PCM stream through PCM:
1384 #       command         "nc example.org 8765"
1385 #       format          "44100:16:2"
1386 #}
1387 #
1388 ## An example of a null output (for no audio output):
1389 #
1390 #audio_output {
1391 #       type            "null"
1392 #       name            "My Null Output"
1393 #       mixer_type      "none"                  # optional
1394 #}
1395 #
1396 ###############################################################################
1397
1398
1399 # Normalization automatic volume adjustments ##################################
1400 #
1401 # This setting specifies the type of ReplayGain to use. This setting can have
1402 # the argument "off", "album", "track" or "auto". "auto" is a special mode that
1403 # chooses between "track" and "album" depending on the current state of
1404 # random playback. If random playback is enabled then "track" mode is used.
1405 # See <http://www.replaygain.org> for more details about ReplayGain.
1406 # This setting is off by default.
1407 #
1408 #replaygain                     "album"
1409 #
1410 # This setting sets the pre-amp used for files that have ReplayGain tags. By
1411 # default this setting is disabled.
1412 #
1413 #replaygain_preamp              "0"
1414 #
1415 # This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1416 # By default this setting is disabled.
1417 #
1418 #replaygain_missing_preamp      "0"
1419 #
1420 # This setting enables or disables ReplayGain limiting.
1421 # MPD calculates actual amplification based on the ReplayGain tags
1422 # and replaygain_preamp / replaygain_missing_preamp setting.
1423 # If replaygain_limit is enabled MPD will never amplify audio signal
1424 # above its original level. If replaygain_limit is disabled such amplification
1425 # might occur. By default this setting is enabled.
1426 #
1427 #replaygain_limit               "yes"
1428 #
1429 # This setting enables on-the-fly normalization volume adjustment. This will
1430 # result in the volume of all playing audio to be adjusted so the output has
1431 # equal "loudness". This setting is disabled by default.
1432 #
1433 #volume_normalization           "no"
1434 #
1435 ###############################################################################
1436
1437 # Character Encoding ##########################################################
1438 #
1439 # If file or directory names do not display correctly for your locale then you
1440 # may need to modify this setting.
1441 #
1442 #filesystem_charset             "UTF-8"
1443 #
1444 ###############################################################################
1445 #+end_src
1446
1447 ** msmtp
1448 :PROPERTIES:
1449 :header-args+: :tangle ~/.msmtprc
1450 :END:
1451
1452 #+begin_src conf
1453 # Set default values for all following accounts.
1454 defaults
1455 port 587
1456 tls on
1457 auth on
1458 #tls_trust_file /etc/ssl/certs/ca-certificates.crt
1459 logfile ~/.msmtp.log
1460
1461 # aminb
1462 account aminb
1463 host nix.aminb.org
1464 tls_fingerprint 65:DD:B8:32:D8:CD:F1:DC:B6:34:EE:35:04:18:AC:09:F3:1D:6D:20:F2:4A:E2:BD:64:48:B7:1F:90:BD:C4:BA
1465 tls_starttls on
1466 from amin@aminb.org
1467 user amin@aminb.org
1468 passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
1469
1470 # gnu
1471 account gnu
1472 host fencepost.gnu.org
1473 # use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1474 tls_fingerprint 28:70:42:76:1C:EC:91:5F:D1:B3:27:A1:CD:3B:32:A4:8B:0B:DC:3A:CD:CA:F6:6F:E4:61:BA:69:D7:4D:0D:0B
1475 tls_starttls on
1476 from aminb@gnu.org
1477 user aminb
1478 passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
1479
1480 # gnu (new address)
1481 account gnu-mab : gnu
1482 from mab@gnu.org
1483
1484 # uwaterloo
1485 account uwaterloo
1486 host connect.uwaterloo.ca
1487 tls_starttls on
1488 from abandali@uwaterloo.ca
1489 user abandali
1490 passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
1491 tls_trust_file /etc/ssl/certs/ca-certificates.crt
1492
1493 # Set a default account
1494 account default : aminb
1495 #+end_src
1496
1497 ** ncmpcpp
1498
1499 *** config
1500 :PROPERTIES:
1501 :header-args+: :tangle ~/.ncmpcpp/config
1502 :END:
1503
1504 #+begin_src conf :tangle no
1505 ##############################################################
1506 ## This is the example configuration file. Copy it to       ##
1507 ## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
1508 ## and set up your preferences.                             ##
1509 ##############################################################
1510 #
1511 ##### directories ######
1512 ##
1513 ## Directory for storing ncmpcpp related files.
1514 ## Changing it is useful if you want to store
1515 ## everything somewhere else and provide command
1516 ## line setting for alternative location to config
1517 ## file which defines that while launching ncmpcpp.
1518 ##
1519 #
1520 ncmpcpp_directory = ~/.ncmpcpp
1521 #
1522 ##
1523 ## Directory for storing downloaded lyrics. It
1524 ## defaults to ~/.lyrics since other MPD clients
1525 ## (eg. ncmpc) also use that location.
1526 ##
1527 #
1528 #lyrics_directory = ~/.lyrics
1529 #
1530 ##### connection settings #####
1531 #
1532 #mpd_host = localhost
1533 #
1534 #mpd_port = 6600
1535 #
1536 #mpd_connection_timeout = 5
1537 #
1538 ## Needed for tag editor and file operations to work.
1539 ##
1540 mpd_music_dir = ~/usr/music
1541 #
1542 #mpd_crossfade_time = 5
1543 #
1544 ##### music visualizer #####
1545 ##
1546 ## Note: In order to make music visualizer work you'll
1547 ## need to use mpd fifo output, whose format parameter
1548 ## has to be set to 44100:16:1 for mono visualization
1549 ## or 44100:16:2 for stereo visualization. Example
1550 ## configuration (it has to be put into mpd.conf):
1551 ##
1552 ## audio_output {
1553 ##        type            "fifo"
1554 ##        name            "Visualizer feed"
1555 ##        path            "/tmp/mpd.fifo"
1556 ##        format          "44100:16:2"
1557 ## }
1558 ##
1559 #
1560 visualizer_fifo_path = /tmp/mpd.fifo
1561 #
1562 ##
1563 ## Note: Below parameter is needed for ncmpcpp
1564 ## to determine which output provides data for
1565 ## visualizer and thus allow syncing between
1566 ## visualization and sound as currently there
1567 ## are some problems with it.
1568 ##
1569 #
1570 visualizer_output_name = my fifo
1571 #
1572 ##
1573 ## If you set format to 44100:16:2, make it 'yes'.
1574 ##
1575 visualizer_in_stereo = yes
1576 #
1577 ##
1578 ## Multiply received samples by given value. Very
1579 ## useful for proper visualization of quiet music.
1580 ##
1581 #visualizer_sample_multiplier = 1
1582 #
1583 ##
1584 ## Note: Below parameter defines how often ncmpcpp
1585 ## has to "synchronize" visualizer and audio outputs.
1586 ## 30 seconds is optimal value, but if you experience
1587 ## synchronization problems, set it to lower value.
1588 ## Keep in mind that sane values start with >=10.
1589 ##
1590 #
1591 visualizer_sync_interval = 30
1592 #
1593 ##
1594 ## Note: To enable spectrum frequency visualization
1595 ## you need to compile ncmpcpp with fftw3 support.
1596 ##
1597 #
1598 ## Available values: spectrum, wave, wave_filled, ellipse.
1599 ##
1600 visualizer_type = spectrum
1601 #
1602 #visualizer_look = ●▮
1603 visualizer_look = "●•"
1604 #
1605 #visualizer_color = blue, cyan, green, yellow, magenta, red
1606 #
1607 ## Alternative subset of 256 colors for terminals that support it.
1608 ##
1609 #visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
1610 #
1611 ##### system encoding #####
1612 ##
1613 ## ncmpcpp should detect your charset encoding
1614 ## but if it failed to do so, you can specify
1615 ## charset encoding you are using here.
1616 ##
1617 ## Note: You can see whether your ncmpcpp build
1618 ## supports charset detection by checking output
1619 ## of `ncmpcpp --version`.
1620 ##
1621 ## Note: Since MPD uses UTF-8 by default, setting
1622 ## this option makes sense only if your encoding
1623 ## is different.
1624 ##
1625 #
1626 #system_encoding = ""
1627 #
1628 ##### delays #####
1629 #
1630 ## Time of inactivity (in seconds) after playlist
1631 ## highlighting will be disabled (0 = always on).
1632 ##
1633 #playlist_disable_highlight_delay = 5
1634 #
1635 ## Defines how long messages are supposed to be visible.
1636 ##
1637 #message_delay_time = 5
1638 #
1639 ##### song format #####
1640 ##
1641 ## For a song format you can use:
1642 ##
1643 ## %l - length
1644 ## %f - filename
1645 ## %D - directory
1646 ## %a - artist
1647 ## %A - album artist
1648 ## %t - title
1649 ## %b - album
1650 ## %y - date
1651 ## %n - track number (01/12 -> 01)
1652 ## %N - full track info (01/12 -> 01/12)
1653 ## %g - genre
1654 ## %c - composer
1655 ## %p - performer
1656 ## %d - disc
1657 ## %C - comment
1658 ## %P - priority
1659 ## $R - begin right alignment
1660 ##
1661 ## If you want to make sure that a part of the format is displayed
1662 ## only when certain tags are present, you can archieve it by
1663 ## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
1664 ## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
1665 ## It is also possible to define a list of alternatives by providing
1666 ## several groups and separating them with '|', e.g. '{%t}|{%f}'
1667 ## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
1668 ## present.
1669 ##
1670 ## Note: If you want to set limit on maximal length of a tag, just
1671 ## put the appropriate number between % and character that defines
1672 ## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
1673 ##
1674 ## In addition, formats support markers used for text attributes.
1675 ## They are followed by character '$'. After that you can put:
1676 ##
1677 ## - 0 - default window color (discards all other colors)
1678 ## - 1 - black
1679 ## - 2 - red
1680 ## - 3 - green
1681 ## - 4 - yellow
1682 ## - 5 - blue
1683 ## - 6 - magenta
1684 ## - 7 - cyan
1685 ## - 8 - white
1686 ## - 9 - end of current color
1687 ## - b - bold text
1688 ## - u - underline text
1689 ## - r - reverse colors
1690 ## - a - use alternative character set
1691 ##
1692 ## If you don't want to use a non-color attribute anymore, just put it
1693 ## again, but this time insert character '/' between '$' and attribute
1694 ## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
1695 ## or filename with reversed colors.
1696 ##
1697 ## If you want to use 256 colors and/or background colors in formats
1698 ## (the naming scheme is described below in section about color
1699 ## definitions), it can be done with the syntax $(COLOR), e.g. to set
1700 ## the artist tag to one of the non-standard colors and make it have
1701 ## yellow background, you need to write $(197_yellow)%a$(end). Note
1702 ## that for standard colors this is interchangable with attributes
1703 ## listed above.
1704 ##
1705 ## Note: colors can be nested.
1706 ##
1707 #
1708 #song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
1709 #
1710 #song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
1711 #
1712 #song_library_format = {%n - }{%t}|{%f}
1713 #
1714 #
1715 #alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
1716 #
1717 #alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
1718 #
1719 #now_playing_prefix = $b
1720 #
1721 #now_playing_suffix = $/b
1722 #
1723 #browser_playlist_prefix = "$2playlist$9 "
1724 #
1725 #selected_item_prefix = $6
1726 #
1727 #selected_item_suffix = $9
1728 #
1729 #modified_item_prefix = $3> $9
1730 #
1731 ##
1732 ## Note: attributes are not supported for the following variables.
1733 ##
1734 #song_window_title_format = {%a - }{%t}|{%f}
1735 ##
1736 ## Note: Below variables are used for sorting songs in browser.
1737 ## The sort mode determines how songs are sorted, and can be used
1738 ## in combination with a sort format to specify a custom sorting format.
1739 ## Available values for browser_sort_mode are "name", "mtime", "format"
1740 ## and "noop".
1741 ##
1742 #
1743 #browser_sort_mode = name
1744 #
1745 #browser_sort_format = {%a - }{%t}|{%f} {(%l)}
1746 #
1747 ##### columns settings #####
1748 ##
1749 ## syntax of song columns list format is "column column etc."
1750 ##
1751 ## - syntax for each column is:
1752 ##
1753 ## (width of the column)[color of the column]{displayed tag}
1754 ##
1755 ## Note: Width is by default in %, if you want a column to
1756 ## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
1757 ## will be the column that take 10% of screen (so the real width
1758 ## will depend on actual screen size), whereas (10f)[white]{a}
1759 ## will take 10 terminal cells, no matter how wide the screen is.
1760 ##
1761 ## - color is optional (if you want the default one,
1762 ##   leave the field empty).
1763 ##
1764 ## Note: You can give a column additional attributes by putting appropriate
1765 ## character after displayed tag character. Available attributes are:
1766 ##
1767 ## - r - column will be right aligned
1768 ## - E - if tag is empty, empty tag marker won't be displayed
1769 ##
1770 ## You can also:
1771 ##
1772 ## - give a column custom name by putting it after attributes,
1773 ##   separated with character ':', e.g. {lr:Length} gives you
1774 ##   right aligned column of lengths named "Length".
1775 ##
1776 ## - define sequence of tags, that have to be displayed in case
1777 ##   predecessor is empty in a way similar to the one in classic
1778 ##   song format, i.e. using '|' character, e.g. {a|c|p:Owner}
1779 ##   creates column named "Owner" that tries to display artist
1780 ##   tag and then composer and performer if previous ones are
1781 ##   not available.
1782 ##
1783 #
1784 #song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
1785 #
1786 ##### various settings #####
1787 #
1788 ##
1789 ## Note: Custom command that will be executed each
1790 ## time song changes. Useful for notifications etc.
1791 ##
1792 #execute_on_song_change = ""
1793 #
1794 #playlist_show_mpd_host = no
1795 #
1796 #playlist_show_remaining_time = no
1797 #
1798 #playlist_shorten_total_times = no
1799 #
1800 #playlist_separate_albums = no
1801 #
1802 ##
1803 ## Note: Possible display modes: classic, columns.
1804 ##
1805 #playlist_display_mode = columns
1806 #
1807 #browser_display_mode = classic
1808 #
1809 #search_engine_display_mode = classic
1810 #
1811 #playlist_editor_display_mode = classic
1812 #
1813 #discard_colors_if_item_is_selected = yes
1814 #
1815 #incremental_seeking = yes
1816 #
1817 #seek_time = 1
1818 #
1819 #volume_change_step = 2
1820 #
1821 #autocenter_mode = no
1822 #
1823 #centered_cursor = no
1824 #
1825 ##
1826 ## Note: You can specify third character which will
1827 ## be used to build 'empty' part of progressbar.
1828 ##
1829 #progressbar_look = =>
1830 progressbar_look = "─╼╶"
1831 #progressbar_look = "─⊙╶"
1832 #
1833 #progressbar_boldness = yes
1834 #
1835 ## Available values: database, playlist.
1836 ##
1837 #default_place_to_search_in = database
1838 #
1839 ## Available values: classic, alternative.
1840 ##
1841 #user_interface = classic
1842 #
1843 #data_fetching_delay = yes
1844 #
1845 ## Available values: artist, album_artist, date, genre, composer, performer.
1846 ##
1847 #media_library_primary_tag = artist
1848 #
1849 ## Available values: wrapped, normal.
1850 ##
1851 #default_find_mode = wrapped
1852 #
1853 #default_tag_editor_pattern = %n - %t
1854 #
1855 #header_visibility = yes
1856 #
1857 #statusbar_visibility = yes
1858 #
1859 #titles_visibility = yes
1860 #
1861 #header_text_scrolling = yes
1862 #
1863 #cyclic_scrolling = no
1864 #
1865 #lines_scrolled = 2
1866 #
1867 #follow_now_playing_lyrics = no
1868 #
1869 #fetch_lyrics_for_current_song_in_background = no
1870 #
1871 #store_lyrics_in_song_dir = no
1872 #
1873 #generate_win32_compatible_filenames = yes
1874 #
1875 #allow_for_physical_item_deletion = no
1876 #
1877 ##
1878 ## Note: If you set this variable, ncmpcpp will try to
1879 ## get info from last.fm in language you set and if it
1880 ## fails, it will fall back to english. Otherwise it will
1881 ## use english the first time.
1882 ##
1883 ## Note: Language has to be expressed as an ISO 639 alpha-2 code.
1884 ##
1885 #lastfm_preferred_language = en
1886 #
1887 #show_hidden_files_in_local_browser = no
1888 #
1889 ##
1890 ## How shall screen switcher work?
1891 ##
1892 ## - "previous" - switch between the current and previous screen.
1893 ## - "screen1,...,screenN" - switch between given sequence of screens.
1894 ##
1895 ## Screens available for use: help, playlist, browser, search_engine,
1896 ## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
1897 ##
1898 #screen_switcher_mode = playlist, browser
1899 #
1900 ##
1901 ## Note: You can define startup screen
1902 ## by choosing screen from the list above.
1903 ##
1904 #startup_screen = playlist
1905 #
1906 ##
1907 ## Note: You can define startup slave screen
1908 ## by choosing screen from the list above or
1909 ## an empty value for no slave screen.
1910 ##
1911 #startup_slave_screen = ""
1912 #
1913 #startup_slave_screen_focus = no
1914 #
1915 ##
1916 ## Default width of locked screen (in %).
1917 ## Acceptable values are from 20 to 80.
1918 ##
1919 #
1920 #locked_screen_width_part = 50
1921 #
1922 #ask_for_locked_screen_width_part = yes
1923 #
1924 #jump_to_now_playing_song_at_start = yes
1925 #
1926 #ask_before_clearing_playlists = yes
1927 #
1928 #clock_display_seconds = no
1929 #
1930 #display_volume_level = yes
1931 #
1932 #display_bitrate = no
1933 #
1934 #display_remaining_time = no
1935 #
1936 ## Available values: none, basic, extended, perl.
1937 ##
1938 #regular_expressions = perl
1939 #
1940 ##
1941 ## Note: If below is enabled, ncmpcpp will ignore leading
1942 ## "The" word while sorting items in browser, tags in
1943 ## media library, etc.
1944 ##
1945 #ignore_leading_the = no
1946 #
1947 #block_search_constraints_change_if_items_found = yes
1948 #
1949 #mouse_support = yes
1950 #
1951 #mouse_list_scroll_whole_page = yes
1952 #
1953 #empty_tag_marker = <empty>
1954 #
1955 #tags_separator = " | "
1956 #
1957 #tag_editor_extended_numeration = no
1958 #
1959 #media_library_sort_by_mtime = no
1960 #
1961 #enable_window_title = yes
1962 #
1963 ##
1964 ## Note: You can choose default search mode for search
1965 ## engine. Available modes are:
1966 ##
1967 ## - 1 - use mpd built-in searching (no regexes, pattern matching)
1968 ## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
1969 ##       but if your mpd is on a remote machine, downloading big database
1970 ##       to process it can take a while
1971 ## - 3 - match only exact values (this mode uses mpd function for searching
1972 ##       in database and local one for searching in current playlist)
1973 ##
1974 #
1975 #search_engine_default_search_mode = 1
1976 #
1977 #external_editor = nano
1978 #
1979 ## Note: set to yes if external editor is a console application.
1980 ##
1981 #use_console_editor = yes
1982 #
1983 ##### colors definitions #####
1984 ##
1985 ## It is possible to set a background color by setting a color
1986 ## value "<foreground>_<background>", e.g. red_black will set
1987 ## foregound color to red and background color to black.
1988 ##
1989 ## In addition, for terminals that support 256 colors it
1990 ## is possible to set one of them by using a number in range
1991 ## [1, 256] instead of color name, e.g. numerical value
1992 ## corresponding to red_black is 2_1. To find out if the
1993 ## terminal supports 256 colors, run ncmpcpp and check out
1994 ## the bottom of the help screen for list of available colors
1995 ## and their numerical values.
1996 ##
1997 ## Note: due to technical limitations of ncurses, if 256 colors
1998 ## are used, it is possible to either use only the colors with
1999 ## default background color, or all pairs from 1_1 up to 254_127,
2000 ## depending on the ncurses version used.
2001 ##
2002 #
2003 #colors_enabled = yes
2004 #
2005 #empty_tag_color = cyan
2006 #
2007 #header_window_color = default
2008 #
2009 #volume_color = default
2010 #
2011 #state_line_color = default
2012 #
2013 #state_flags_color = default
2014 #
2015 #main_window_color = yellow
2016 #
2017 #color1 = white
2018 #
2019 #color2 = green
2020 #
2021 #main_window_highlight_color = yellow
2022 #
2023 #progressbar_color = black
2024 #
2025 #progressbar_elapsed_color = green
2026 #
2027 #statusbar_color = default
2028 #
2029 #alternative_ui_separator_color = black
2030 #
2031 #active_column_color = red
2032 #
2033 #window_border_color = green
2034 #
2035 #active_window_border = red
2036 #
2037 #+end_src
2038
2039 *** bindings
2040 :PROPERTIES:
2041 :header-args+: :tangle ~/.ncmpcpp/bindings
2042 :END:
2043
2044 #+begin_src conf :tangle no
2045 def_key "j"
2046     scroll_down
2047 def_key "k"
2048     scroll_up
2049
2050 def_key "ctrl-u"
2051     page_up
2052 def_key "ctrl-d"
2053     page_down
2054
2055 def_key "h"
2056     previous_column
2057 def_key "l"
2058     next_column
2059
2060 def_key "."
2061     show_lyrics
2062
2063 def_key "n"
2064     next_found_item
2065 def_key "N"
2066     previous_found_item
2067
2068 def_key "J"
2069     move_sort_order_down
2070 def_key "K"
2071     move_sort_order_up
2072 #+end_src
2073
2074 ** notmuch
2075
2076 *** notmuch-config
2077 :PROPERTIES:
2078 :header-args+: :tangle ~/.notmuch-config
2079 :END:
2080
2081 #+begin_src conf
2082 # .notmuch-config - Configuration file for the notmuch mail system
2083 #
2084 # For more information about notmuch, see https://notmuchmail.org
2085
2086 # Database configuration
2087 #
2088 # The only value supported here is 'path' which should be the top-level
2089 # directory where your mail currently exists and to where mail will be
2090 # delivered in the future. Files should be individual email messages.
2091 # Notmuch will store its database within a sub-directory of the path
2092 # configured here named ".notmuch".
2093 #
2094 [database]
2095 path=/home/amin/mail
2096
2097 # User configuration
2098 #
2099 # Here is where you can let notmuch know how you would like to be
2100 # addressed. Valid settings are
2101 #
2102 #       name            Your full name.
2103 #       primary_email   Your primary email address.
2104 #       other_email     A list (separated by ';') of other email addresses
2105 #                       at which you receive email.
2106 #
2107 # Notmuch will use the various email addresses configured here when
2108 # formatting replies. It will avoid including your own addresses in the
2109 # recipient list of replies, and will set the From address based on the
2110 # address to which the original email was addressed.
2111 #
2112 [user]
2113 name=Amin Bandali
2114 primary_email=amin@aminb.org
2115 other_email=abandali@uwaterloo.ca;mab@gnu.org;aminb@gnu.org;
2116
2117 # Configuration for "notmuch new"
2118 #
2119 # The following options are supported here:
2120 #
2121 #       tags    A list (separated by ';') of the tags that will be
2122 #               added to all messages incorporated by "notmuch new".
2123 #
2124 #       ignore  A list (separated by ';') of file and directory names
2125 #               that will not be searched for messages by "notmuch new".
2126 #
2127 #               NOTE: *Every* file/directory that goes by one of those
2128 #               names will be ignored, independent of its depth/location
2129 #               in the mail store.
2130 #
2131 [new]
2132 tags=new;
2133 #tags=unread;inbox;
2134 ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
2135
2136 # Search configuration
2137 #
2138 # The following option is supported here:
2139 #
2140 #       exclude_tags
2141 #               A ;-separated list of tags that will be excluded from
2142 #               search results by default.  Using an excluded tag in a
2143 #               query will override that exclusion.
2144 #
2145 [search]
2146 exclude_tags=deleted;spam;
2147
2148 # Maildir compatibility configuration
2149 #
2150 # The following option is supported here:
2151 #
2152 #       synchronize_flags      Valid values are true and false.
2153 #
2154 #       If true, then the following maildir flags (in message filenames)
2155 #       will be synchronized with the corresponding notmuch tags:
2156 #
2157 #               Flag    Tag
2158 #               ----    -------
2159 #               D       draft
2160 #               F       flagged
2161 #               P       passed
2162 #               R       replied
2163 #               S       unread (added when 'S' flag is not present)
2164 #
2165 #       The "notmuch new" command will notice flag changes in filenames
2166 #       and update tags, while the "notmuch tag" and "notmuch restore"
2167 #       commands will notice tag changes and update flags in filenames
2168 #
2169 [maildir]
2170 synchronize_flags=true
2171
2172 # Cryptography related configuration
2173 #
2174 # The following option is supported here:
2175 #
2176 #       gpg_path
2177 #               binary name or full path to invoke gpg.
2178 #
2179 [crypto]
2180 gpg_path=gpg
2181 #+end_src
2182
2183 *** pre-new hook
2184 :PROPERTIES:
2185 :header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
2186 :END:
2187
2188 #+begin_src sh
2189 touch /tmp/gnusieve.log
2190 sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
2191              -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
2192 #+end_src
2193
2194 *** post-new hook
2195 :PROPERTIES:
2196 :header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
2197 :END:
2198
2199 #+begin_src sh
2200 # apply sent tag to messages sent by me
2201 notmuch tag -new +sent -- from:amin@aminb.org or from:mab@gnu.org or from:aminb@gnu.org or from:abandali@uwaterloo.ca
2202
2203 # initial tagging
2204 notmuch tag -latest -- tag:latest
2205 notmuch tag +inbox +unread +latest -new -- tag:new
2206
2207
2208 # apply tags to lists
2209
2210 # <aminb>
2211 notmuch tag -inbox +lists/~sircmpwn/srht-admins   -- folder:amin/lists/~sircmpwn/srht-admins
2212 notmuch tag -inbox +lists/~sircmpwn/srht-announce -- folder:amin/lists/~sircmpwn/srht-announce
2213 notmuch tag -inbox +lists/~sircmpwn/srht-dev      -- folder:amin/lists/~sircmpwn/srht-dev
2214 notmuch tag -inbox +lists/~sircmpwn/srht-discuss  -- folder:amin/lists/~sircmpwn/srht-discuss
2215
2216 notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
2217 notmuch tag -inbox +lists/haskell-weekly   -- folder:amin/lists/haskell-weekly
2218
2219 notmuch tag -inbox +pay -- folder:amin/pay
2220 notmuch tag -inbox +banking -- folder:amin/banking
2221 # </aminb>
2222
2223 # <uw>
2224 notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
2225 notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
2226
2227 notmuch tag -inbox +lists/clvsingle        -- folder:uwaterloo/lists/Clvsingle
2228 notmuch tag -inbox +lists/gsa              -- folder:uwaterloo/lists/GSA
2229 notmuch tag -inbox +lists/math-grad        -- folder:uwaterloo/lists/Math-grad
2230 notmuch tag -inbox +lists/scs-grads        -- folder:uwaterloo/lists/scs-grads
2231 notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
2232 # </uw>
2233
2234 # <gnu>
2235 notmuch tag -inbox +lists/emacs-devel       -- folder:gnu/l/emacs-devel
2236 notmuch tag -inbox +lists/emacs-orgmode     -- folder:gnu/l/emacs-orgmode
2237 notmuch tag -inbox +lists/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
2238 notmuch tag -inbox +lists/fencepost-users   -- folder:gnu/l/fencepost-users
2239 notmuch tag -inbox +lists/guix-devel        -- folder:gnu/l/guix-devel
2240 notmuch tag -inbox +lists/guile-devel       -- folder:gnu/l/guile-devel
2241 notmuch tag -inbox +lists/help-gnu-emacs    -- folder:gnu/l/help-gnu-emacs
2242 notmuch tag -inbox +lists/info-gnu-emacs    -- folder:gnu/l/info-gnu-emacs
2243 notmuch tag -inbox +lists/www-commits       -- folder:gnu/l/www-commits
2244 notmuch tag -inbox +lists/www-discuss       -- folder:gnu/l/www-discuss
2245 notmuch tag -inbox +webmasters              -- folder:gnu/webmasters
2246
2247 notmuch tag -inbox +lists/deepspec          -- folder:gnu/l/deepspec
2248 notmuch tag -inbox +lists/haskell-cafe      -- folder:gnu/l/haskell-cafe
2249 notmuch tag -inbox +lists/haskell-art       -- folder:gnu/l/haskell-art
2250 notmuch tag -inbox +lists/notmuch           -- folder:gnu/l/notmuch
2251 # </gnu>
2252
2253 notmuch tag -inbox -unread +archive/notmuch     -- path:archive/notmuch/**
2254 notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**
2255 #+end_src
2256
2257 *** notmuch.service
2258 :PROPERTIES:
2259 :header-args+: :tangle ~/.config/systemd/user/notmuch.service
2260 :END:
2261
2262 #+begin_src conf :tangle no
2263 [Unit]
2264 Description=notmuch service
2265
2266 [Service]
2267 Type=oneshot
2268 ExecStart=/usr/bin/notmuch new
2269 StandardOutput=syslog
2270 StandardError=syslog
2271 #+end_src
2272
2273 *** notmuch.timer
2274 :PROPERTIES:
2275 :header-args+: :tangle ~/.config/systemd/user/notmuch.timer
2276 :END:
2277
2278 #+begin_src conf :tangle no
2279 [Unit]
2280 Description=notmuch timer
2281
2282 [Timer]
2283 OnCalendar=*:0/5
2284 Persistent=true
2285 Unit=notmuch.service
2286
2287 [Install]
2288 WantedBy=timers.target
2289 #+end_src
2290
2291 ** offlineimap
2292
2293 *** offlineimaprc
2294 :PROPERTIES:
2295 :header-args+: :tangle ~/.offlineimaprc
2296 :END:
2297
2298 #+begin_src conf :tangle no
2299 [general]
2300 pythonfile = ~/.offlineimap.py
2301 accounts = Gmail, aminb
2302 maxsyncaccounts = 3
2303
2304 [Account Gmail]
2305 localrepository = GmailL
2306 remoterepository = GmailR
2307
2308 [Account aminb]
2309 localrepository = aminbL
2310 remoterepository = aminbR
2311
2312 [Repository GmailL]
2313 type = Maildir
2314 localfolders = ~/Maildir/Gmail
2315
2316 [Repository GmailR]
2317 type = IMAP
2318 remotehost = imap.gmail.com
2319 remoteusereval = mailuser("gmail")
2320 remotepasseval = mailpasswd("gmail")
2321 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2322 ssl = yes
2323 folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
2324 maxconnections = 1
2325 realdelete = no
2326
2327 [Repository aminbL]
2328 type = Maildir
2329 localfolders = ~/Maildir/aminb
2330
2331 [Repository aminbR]
2332 type = IMAP
2333 remotehost = mail.aminb.org
2334 remoteusereval = mailuser("aminb")
2335 remotepasseval = mailpasswd("aminb")
2336 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2337 ssl = yes
2338 folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
2339 maxconnections = 1
2340 realdelete = no
2341 #+end_src
2342
2343 *** offlineimap.py
2344 :PROPERTIES:
2345 :header-args+: :tangle ~/.offlineimap.py
2346 :END:
2347
2348 #+begin_src python :tangle no
2349 import os
2350 import subprocess
2351
2352 def mailpasswd(acct):
2353     acct = os.path.basename(acct)
2354     path = "/home/amin/.passwd/%s.gpg" % acct
2355     args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
2356     try:
2357         return subprocess.check_output(args).strip()
2358     except subprocess.CalledProcessError:
2359         return ""
2360
2361 def mailuser(acct):
2362     acct = os.path.basename(acct)
2363     path = "/home/amin/.passwd/%s" % acct
2364     args = ["cat", path]
2365     try:
2366         return subprocess.check_output(args).strip()
2367     except subprocess.CalledProcessError:
2368         return ""
2369
2370 def prime_gpg_agent():
2371   ret = False
2372   i = 1
2373   while not ret:
2374     ret = (mailpasswd("prime") == "prime")
2375     if i > 2:
2376       from offlineimap.ui import getglobalui
2377       sys.stderr.write("Error reading in passwords. Terminating.\n")
2378       getglobalui().terminate()
2379     i += 1
2380   return ret
2381
2382 prime_gpg_agent()
2383 #+end_src
2384
2385 ** pigeonhole
2386 *** gnu.sieve
2387 :PROPERTIES:
2388 :header-args+: :tangle ~/sieve/gnu.sieve :comments none
2389 :END:
2390
2391 #+begin_src conf
2392 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags", "include" ];
2393
2394 if anyof (
2395   address :is "from" "webmasters@gnu.org",
2396   address :is "from" "webmasters-comment@gnu.org") {
2397   fileinto :create "webmasters";
2398   stop;
2399 }
2400
2401 include :personal "lists";
2402 #+end_src
2403
2404 *** lists.sieve
2405 :PROPERTIES:
2406 :header-args+: :tangle ~/sieve/lists.sieve :comments none
2407 :END:
2408
2409 #+begin_src conf
2410 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags",
2411  "include" ];
2412
2413 if anyof (
2414     header :contains "list-id" "<emacs-devel.gnu.org>",
2415     header :contains "list-id" "<emacs-orgmode.gnu.org>",
2416     header :contains "list-id" "<emacsconf-discuss.gnu.org>",
2417     header :contains "list-id" "<fencepost-users.gnu.org>",
2418     header :contains "list-id" "<guix-devel.gnu.org>",
2419     header :contains "list-id" "<guile-devel.gnu.org>",
2420     header :contains "list-id" "<help-gnu-emacs.gnu.org>",
2421     header :contains "list-id" "<info-gnu-emacs.gnu.org>",
2422     header :contains "list-id" "<www-commits.gnu.org>",
2423     header :contains "list-id" "<www-discuss.gnu.org>",
2424     header :contains "list-id" "<deepspec.lists.cs.princeton.edu>",
2425     header :contains "list-id" "<haskell-cafe.haskell.org>",
2426     header :contains "list-id" "<haskell-art.we.lurk.org>",
2427     header :contains "list-id" "<notmuch.notmuchmail.org>") {
2428     if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
2429         set :lower "listname" "${1}";
2430         fileinto :create "l/${listname}";
2431     }
2432 }
2433 #+end_src
2434
2435 ** polybar
2436
2437 *** config
2438 :PROPERTIES:
2439 :header-args+: :tangle ~/.config/polybar/config
2440 :END:
2441
2442 #+begin_src conf :tangle no
2443 ;=====================================================
2444 ;
2445 ;   To learn more about how to configure Polybar
2446 ;   go to https://github.com/jaagr/polybar
2447 ;
2448 ;   The README contains alot of information
2449 ;
2450 ;=====================================================
2451
2452 [colors]
2453 ;background = ${xrdb:color0:#222}
2454 background = #222
2455 background-alt = #444
2456 ;foreground = ${xrdb:color7:#222}
2457 foreground = #eee
2458 foreground-alt = #888
2459 primary = #ffb52a
2460 secondary = #e60053
2461 alert = #bd2c40
2462
2463 [bar/main]
2464 ;monitor = ${env:MONITOR:HDMI-1}
2465 width = 100%
2466 height = 27
2467 ;offset-x = 1%
2468 ;offset-y = 1%
2469 radius = 3.0
2470 fixed-center = true
2471
2472 background = ${colors.background}
2473 foreground = ${colors.foreground}
2474
2475 line-size = 3
2476 line-color = #f00
2477
2478 border-size = 4
2479 border-color = #00000000
2480
2481 padding-left = 0
2482 padding-right = 2
2483
2484 module-margin-left = 2
2485 module-margin-right = 2
2486
2487 font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
2488 font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
2489 font-2 = Wuncon Siji:pixelsize=10;1
2490 font-3 = FontAwesome:pixelsize=10;1
2491
2492 modules-left = bspwm xwindow
2493 modules-center =
2494 modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
2495
2496 tray-position = right
2497 tray-padding = 1
2498 ;tray-transparent = true
2499 ;tray-background = #0063ff
2500 tray-maxsize = 18
2501
2502 wm-restack = bspwm
2503
2504 ;override-redirect = true
2505
2506 scroll-up = bspwm-desknext
2507 scroll-down = bspwm-deskprev
2508
2509 [module/xwindow]
2510 type = internal/xwindow
2511 label = %title:0:50:...%
2512
2513 [module/xkeyboard]
2514 type = internal/xkeyboard
2515 blacklist-0 = num lock
2516
2517 format-prefix = " "
2518 format-prefix-foreground = ${colors.foreground-alt}
2519 format-prefix-underline = ${colors.secondary}
2520
2521 label-layout = %layout%
2522 label-layout-underline = ${colors.secondary}
2523
2524 label-indicator-padding = 2
2525 label-indicator-margin = 1
2526 label-indicator-background = ${colors.secondary}
2527 label-indicator-underline = ${colors.secondary}
2528
2529 [module/filesystem]
2530 type = internal/fs
2531 interval = 25
2532
2533 mount-0 = /
2534
2535 label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
2536 label-unmounted = %mountpoint% not mounted
2537 label-unmounted-foreground = ${colors.foreground-alt}
2538
2539 [module/bspwm]
2540 type = internal/bspwm
2541
2542 label-focused = %index%
2543 label-focused-background = ${colors.background-alt}
2544 label-focused-underline= ${colors.primary}
2545 label-focused-padding = 2
2546
2547 label-occupied = %index%
2548 label-occupied-padding = 2
2549
2550 label-urgent = %index%!
2551 label-urgent-background = ${colors.alert}
2552 label-urgent-padding = 2
2553
2554 label-empty = %index%
2555 label-empty-foreground = ${colors.foreground-alt}
2556 label-empty-padding = 2
2557
2558 [module/i3]
2559 type = internal/i3
2560 format = <label-state> <label-mode>
2561 index-sort = true
2562 wrapping-scroll = false
2563
2564 ; Only show workspaces on the same output as the bar
2565 ;pin-workspaces = true
2566
2567 label-mode-padding = 2
2568 label-mode-foreground = #000
2569 label-mode-background = ${colors.primary}
2570
2571 ; focused = Active workspace on focused monitor
2572 label-focused = %index%
2573 label-focused-background = ${module/bspwm.label-focused-background}
2574 label-focused-underline = ${module/bspwm.label-focused-underline}
2575 label-focused-padding = ${module/bspwm.label-focused-padding}
2576
2577 ; unfocused = Inactive workspace on any monitor
2578 label-unfocused = %index%
2579 label-unfocused-padding = ${module/bspwm.label-occupied-padding}
2580
2581 ; visible = Active workspace on unfocused monitor
2582 label-visible = %index%
2583 label-visible-background = ${self.label-focused-background}
2584 label-visible-underline = ${self.label-focused-underline}
2585 label-visible-padding = ${self.label-focused-padding}
2586
2587 ; urgent = Workspace with urgency hint set
2588 label-urgent = %index%
2589 label-urgent-background = ${module/bspwm.label-urgent-background}
2590 label-urgent-padding = ${module/bspwm.label-urgent-padding}
2591
2592 [module/mpd]
2593 type = internal/mpd
2594 format-online = <label-song>  <icon-prev> <icon-stop> <toggle> <icon-next>
2595
2596 icon-prev = 
2597 icon-stop = 
2598 icon-play = 
2599 icon-pause = 
2600 icon-next = 
2601
2602 label-song-maxlen = 25
2603 label-song-ellipsis = true
2604
2605 [module/xbacklight]
2606 type = internal/xbacklight
2607
2608 format = <label> <bar>
2609 label = BL
2610
2611 bar-width = 10
2612 bar-indicator = |
2613 bar-indicator-foreground = #ff
2614 bar-indicator-font = 2
2615 bar-fill = ─
2616 bar-fill-font = 2
2617 bar-fill-foreground = #9f78e1
2618 bar-empty = ─
2619 bar-empty-font = 2
2620 bar-empty-foreground = ${colors.foreground-alt}
2621
2622 [module/backlight-acpi]
2623 inherit = module/xbacklight
2624 type = internal/backlight
2625 ;card = intel_backlight
2626 card = mba6x_backlight
2627
2628 [module/cpu]
2629 type = internal/cpu
2630 interval = 2
2631 format-prefix = " "
2632 format-prefix-foreground = ${colors.foreground-alt}
2633 format-underline = #f90000
2634 label = %percentage%%
2635
2636 [module/memory]
2637 type = internal/memory
2638 interval = 2
2639 format-prefix = " "
2640 format-prefix-foreground = ${colors.foreground-alt}
2641 format-underline = #4bffdc
2642 label = %percentage_used%%
2643
2644 [module/wlan]
2645 type = internal/network
2646 interface =
2647 interval = 3.0
2648
2649 format-connected = <ramp-signal> <label-connected>
2650 format-connected-underline = #9f78e1
2651 label-connected = %essid%
2652
2653 format-disconnected =
2654 ;format-disconnected = <label-disconnected>
2655 ;format-disconnected-underline = ${self.format-connected-underline}
2656 ;label-disconnected = %ifname% disconnected
2657 ;label-disconnected-foreground = ${colors.foreground-alt}
2658
2659 ramp-signal-0 = 
2660 ramp-signal-1 = 
2661 ramp-signal-2 = 
2662 ramp-signal-3 = 
2663 ramp-signal-4 = 
2664 ramp-signal-foreground = ${colors.foreground-alt}
2665
2666 [module/eth]
2667 type = internal/network
2668 interface =
2669 interval = 3.0
2670
2671 format-connected-underline = #55aa55
2672 format-connected-prefix = " "
2673 format-connected-prefix-foreground = ${colors.foreground-alt}
2674 label-connected = %local_ip%
2675
2676 format-disconnected =
2677 ;format-disconnected = <label-disconnected>
2678 ;format-disconnected-underline = ${self.format-connected-underline}
2679 ;label-disconnected = %ifname% disconnected
2680 ;label-disconnected-foreground = ${colors.foreground-alt}
2681
2682 [module/date]
2683 type = internal/date
2684 interval = 5
2685
2686 date =
2687 date-alt = " %Y-%m-%d"
2688
2689 time = %H:%M
2690 time-alt = %H:%M:%S
2691
2692 format-prefix = 
2693 format-prefix-foreground = ${colors.foreground-alt}
2694 format-underline = #0a6cf5
2695
2696 label = %date% %time%
2697
2698 [module/volume]
2699 type = internal/volume
2700
2701 format-volume = <label-volume> <bar-volume>
2702 label-volume = vol
2703 label-volume-foreground = ${root.foreground}
2704
2705 format-muted-prefix = " "
2706 format-muted-foreground = ${colors.foreground-alt}
2707 label-muted = mute
2708
2709 bar-volume-width = 10
2710 bar-volume-foreground-0 = #55aa55
2711 bar-volume-foreground-1 = #55aa55
2712 bar-volume-foreground-2 = #55aa55
2713 bar-volume-foreground-3 = #55aa55
2714 bar-volume-foreground-4 = #55aa55
2715 bar-volume-foreground-5 = #f5a70a
2716 bar-volume-foreground-6 = #ff5555
2717 bar-volume-gradient = false
2718 bar-volume-indicator = |
2719 bar-volume-indicator-font = 2
2720 bar-volume-fill = ─
2721 bar-volume-fill-font = 2
2722 bar-volume-empty = ─
2723 bar-volume-empty-font = 2
2724 bar-volume-empty-foreground = ${colors.foreground-alt}
2725
2726 [module/battery]
2727 type = internal/battery
2728 battery = BAT0
2729 adapter = ADP1
2730 full-at = 64
2731
2732 format-charging = <animation-charging> <label-charging>
2733 format-charging-underline = #ffb52a
2734
2735 format-discharging = <ramp-capacity> <label-discharging>
2736 format-discharging-underline = ${self.format-charging-underline}
2737
2738 format-full-prefix = " "
2739 format-full-prefix-foreground = ${colors.foreground-alt}
2740 format-full-underline = ${self.format-charging-underline}
2741
2742 ramp-capacity-0 = 
2743 ramp-capacity-1 = 
2744 ramp-capacity-2 = 
2745 ramp-capacity-foreground = ${colors.foreground-alt}
2746
2747 animation-charging-0 = 
2748 animation-charging-1 = 
2749 animation-charging-2 = 
2750 animation-charging-foreground = ${colors.foreground-alt}
2751 animation-charging-framerate = 750
2752
2753 [module/temperature]
2754 type = internal/temperature
2755 thermal-zone = 1
2756 warn-temperature = 66
2757
2758 format = <ramp> <label>
2759 format-underline = #f50a4d
2760 format-warn = <ramp> <label-warn>
2761 format-warn-underline = ${self.format-underline}
2762
2763 label = %temperature%
2764 label-warn = %temperature%
2765 label-warn-foreground = ${colors.secondary}
2766
2767 ramp-0 = 
2768 ramp-1 = 
2769 ramp-2 = 
2770 ramp-foreground = ${colors.foreground-alt}
2771
2772 [module/powermenu]
2773 type = custom/menu
2774
2775 format-spacing = 1
2776
2777 label-open = 
2778 label-open-foreground = ${colors.secondary}
2779 label-close =  cancel
2780 label-close-foreground = ${colors.secondary}
2781 label-separator = |
2782 label-separator-foreground = ${colors.foreground-alt}
2783
2784 menu-0-0 = reboot
2785 menu-0-0-exec = menu-open-1
2786 menu-0-1 = power off
2787 menu-0-1-exec = menu-open-2
2788
2789 menu-1-0 = cancel
2790 menu-1-0-exec = menu-open-0
2791 menu-1-1 = reboot
2792 menu-1-1-exec = sudo reboot
2793
2794 menu-2-0 = power off
2795 menu-2-0-exec = sudo poweroff
2796 menu-2-1 = cancel
2797 menu-2-1-exec = menu-open-0
2798
2799 [module/mail]
2800 type = custom/script
2801 interval = 60
2802 format = <label>
2803 format-prefix = " "
2804 format-prefix-foreground = ${colors.foreground-alt}
2805 format-underline = #0a6cf5
2806 exec = notmuch count tag:unread
2807
2808 [settings]
2809 screenchange-reload = true
2810 ;compositing-background = xor
2811 ;compositing-background = screen
2812 ;compositing-foreground = source
2813 ;compositing-border = over
2814
2815 [global/wm]
2816 margin-top = 0
2817 margin-bottom = 0
2818
2819 ; vim:ft=dosini
2820 #+end_src
2821
2822 *** polybar-launch
2823 :PROPERTIES:
2824 :header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
2825 :END:
2826
2827 #+begin_src sh :tangle no
2828 # Terminate already running bar instances
2829 killall -q polybar
2830
2831 # Wait until the processes have been shut down
2832 while pgrep -x polybar >/dev/null; do sleep 1; done
2833
2834 # Launch main bar
2835 polybar main &
2836
2837 echo "Bars launched..."
2838 #+end_src
2839
2840 ** PowerTOP
2841 :PROPERTIES:
2842 :header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
2843 :END:
2844
2845 #+begin_src conf
2846 [Unit]
2847 Description=Powertop tunings
2848
2849 [Service]
2850 ExecStart=/usr/bin/powertop --auto-tune
2851 RemainAfterExit=true
2852
2853 [Install]
2854 WantedBy=multi-user.target
2855 #+end_src
2856
2857 ** ranger
2858
2859 *** rc.conf
2860 :PROPERTIES:
2861 :header-args+: :tangle ~/.config/ranger/rc.conf
2862 :END:
2863
2864 #+begin_src conf :tangle no
2865 # ===================================================================
2866 # This file contains the default startup commands for ranger.
2867 # To change them, it is recommended to create the file
2868 # ~/.config/ranger/rc.conf and add your custom commands there.
2869 #
2870 # If you copy this whole file there, you may want to set the environment
2871 # variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
2872 #
2873 # The purpose of this file is mainly to define keybindings and settings.
2874 # For running more complex python code, please create a plugin in "plugins/" or
2875 # a command in "commands.py".
2876 #
2877 # Each line is a command that will be run before the user interface
2878 # is initialized.  As a result, you can not use commands which rely
2879 # on the UI such as :delete or :mark.
2880 # ===================================================================
2881
2882 # ===================================================================
2883 # == Options
2884 # ===================================================================
2885
2886 # How many columns are there, and what are their relative widths?
2887 set column_ratios 1,3,4
2888
2889 # Which files should be hidden? (regular expression)
2890 set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
2891
2892 # Show hidden files? You can toggle this by typing 'zh'
2893 set show_hidden false
2894
2895 # Ask for a confirmation when running the "delete" command?
2896 # Valid values are "always" (default), "never", "multiple"
2897 # With "multiple", ranger will ask only if you delete multiple files at once.
2898 set confirm_on_delete multiple
2899
2900 # Which script is used to generate file previews?
2901 # ranger ships with scope.sh, a script that calls external programs (see
2902 # README for dependencies) to preview images, archives, etc.
2903 set preview_script ~/.config/ranger/scope.sh
2904
2905 # Use the external preview script or display simple plain text previews?
2906 set use_preview_script true
2907
2908 # Open all images in this directory when running certain image viewers
2909 # like feh or sxiv?  You can still open selected files by marking them.
2910 set open_all_images true
2911
2912 # Be aware of version control systems and display information.
2913 set vcs_aware false
2914
2915 # State of the three backends git, hg, bzr. The possible states are
2916 # disabled, local (only show local info), enabled (show local and remote
2917 # information).
2918 set vcs_backend_git enabled
2919 set vcs_backend_hg disabled
2920 set vcs_backend_bzr disabled
2921
2922 # Preview images in full color with the external command "w3mimgpreview"?
2923 # This requires the console web browser "w3m" and a supported terminal.
2924 # It has been successfully tested with "xterm" and "urxvt" without tmux.
2925 set preview_images true
2926
2927 # Use a unicode "..." character to mark cut-off filenames?
2928 set unicode_ellipsis false
2929
2930 # Show dotfiles in the bookmark preview box?
2931 set show_hidden_bookmarks true
2932
2933 # Which colorscheme to use?  These colorschemes are available by default:
2934 # default, jungle, snow
2935 set colorscheme default
2936
2937 # Preview files on the rightmost column?
2938 # And collapse (shrink) the last column if there is nothing to preview?
2939 set preview_files true
2940 set preview_directories true
2941 set collapse_preview true
2942
2943 # Save the console history on exit?
2944 set save_console_history true
2945
2946 # Draw the status bar on top of the browser window (default: bottom)
2947 set status_bar_on_top false
2948
2949 # Draw a progress bar in the status bar which displays the average state of all
2950 # currently running tasks which support progress bars?
2951 set draw_progress_bar_in_status_bar true
2952
2953 # Draw borders around columns?
2954 set draw_borders true
2955
2956 # Display the directory name in tabs?
2957 set dirname_in_tabs false
2958
2959 # Enable the mouse support?
2960 set mouse_enabled true
2961
2962 # Display the file size in the main column or status bar?
2963 set display_size_in_main_column true
2964 set display_size_in_status_bar true
2965
2966 # Display files tags in all columns or only in main column?
2967 set display_tags_in_all_columns true
2968
2969 # Set a title for the window?
2970 set update_title false
2971
2972 # Set the title to "ranger" in the tmux program?
2973 set update_tmux_title false
2974
2975 # Shorten the title if it gets long?  The number defines how many
2976 # directories are displayed at once, 0 turns off this feature.
2977 set shorten_title 3
2978
2979 # Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
2980 set tilde_in_titlebar false
2981
2982 # How many directory-changes or console-commands should be kept in history?
2983 set max_history_size 20
2984 set max_console_history_size 50
2985
2986 # Try to keep so much space between the top/bottom border when scrolling:
2987 set scroll_offset 8
2988
2989 # Flush the input after each key hit?  (Noticable when ranger lags)
2990 set flushinput true
2991
2992 # Padding on the right when there's no preview?
2993 # This allows you to click into the space to run the file.
2994 set padding_right true
2995
2996 # Save bookmarks (used with mX and `X) instantly?
2997 # This helps to synchronize bookmarks between multiple ranger
2998 # instances but leads to *slight* performance loss.
2999 # When false, bookmarks are saved when ranger is exited.
3000 set autosave_bookmarks true
3001
3002 # You can display the "real" cumulative size of directories by using the
3003 # command :get_cumulative_size or typing "dc".  The size is expensive to
3004 # calculate and will not be updated automatically.  You can choose
3005 # to update it automatically though by turning on this option:
3006 set autoupdate_cumulative_size false
3007
3008 # Turning this on makes sense for screen readers:
3009 set show_cursor false
3010
3011 # One of: size, basename, mtime, type
3012 set sort natural
3013
3014 # Additional sorting options
3015 set sort_reverse false
3016 set sort_case_insensitive true
3017 set sort_directories_first true
3018
3019 # Enable this if key combinations with the Alt Key don't work for you.
3020 # (Especially on xterm)
3021 set xterm_alt_key false
3022
3023 # ===================================================================
3024 # == Local Options
3025 # ===================================================================
3026 # You can set local options that only affect a single directory.
3027
3028 # Examples:
3029 # setlocal path=~/downloads sort mtime
3030
3031 # ===================================================================
3032 # == Command Aliases in the Console
3033 # ===================================================================
3034
3035 alias e    edit
3036 alias q    quit
3037 alias q!   quitall
3038 alias qall quitall
3039 alias setl setlocal
3040
3041 alias filter     scout -prt
3042 alias find       scout -aet
3043 alias mark       scout -mr
3044 alias unmark     scout -Mr
3045 alias search     scout -rs
3046 alias search_inc scout -rts
3047 alias travel     scout -aefiklst
3048
3049 # ===================================================================
3050 # == Define keys for the browser
3051 # ===================================================================
3052
3053 # Basic
3054 map     Q quit!
3055 map     q quit
3056 copymap q ZZ ZQ
3057
3058 map R     reload_cwd
3059 map <C-r> reset
3060 map <C-l> redraw_window
3061 map <C-c> abort
3062 map <esc> change_mode normal
3063
3064 map i display_file
3065 map ? help
3066 map W display_log
3067 map w taskview_open
3068 map S shell $SHELL
3069
3070 map :  console
3071 map ;  console
3072 map !  console shell
3073 map @  console -p6 shell  %%s
3074 map #  console shell -p
3075 map s  console shell
3076 map r  chain draw_possible_programs; console open_with
3077 map f  console find
3078 map cd console cd
3079
3080 # Tagging / Marking
3081 map t       tag_toggle
3082 map ut      tag_remove
3083 map "<any>  tag_toggle tag=%any
3084 map <Space> mark_files toggle=True
3085 map v       mark_files all=True toggle=True
3086 map uv      mark_files all=True val=False
3087 map V       toggle_visual_mode
3088 map uV      toggle_visual_mode reverse=True
3089
3090 # For the nostalgics: Midnight Commander bindings
3091 map <F1> help
3092 map <F3> display_file
3093 map <F4> edit
3094 map <F5> copy
3095 map <F6> cut
3096 map <F7> console mkdir
3097 map <F8> console delete
3098 map <F10> exit
3099
3100 # In case you work on a keyboard with dvorak layout
3101 map <UP>       move up=1
3102 map <DOWN>     move down=1
3103 map <LEFT>     move left=1
3104 map <RIGHT>    move right=1
3105 map <HOME>     move to=0
3106 map <END>      move to=-1
3107 map <PAGEDOWN> move down=1   pages=True
3108 map <PAGEUP>   move up=1     pages=True
3109 map <CR>       move right=1
3110 map <DELETE>   console delete
3111 map <INSERT>   console touch
3112
3113 # VIM-like
3114 copymap <UP>       k
3115 copymap <DOWN>     j
3116 copymap <LEFT>     h
3117 copymap <RIGHT>    l
3118 copymap <HOME>     gg
3119 copymap <END>      G
3120 copymap <PAGEDOWN> <C-F>
3121 copymap <PAGEUP>   <C-B>
3122
3123 map J  move down=0.5  pages=True
3124 map K  move up=0.5    pages=True
3125 copymap J <C-D>
3126 copymap K <C-U>
3127
3128 # Jumping around
3129 map H     history_go -1
3130 map L     history_go 1
3131 map ]     move_parent 1
3132 map [     move_parent -1
3133 map }     traverse
3134
3135 map gh cd ~
3136 map ge cd /etc
3137 map gu cd /usr
3138 map gd cd /dev
3139 map gl cd -r .
3140 map gL cd -r %f
3141 map go cd /opt
3142 map gv cd /var
3143 map gm cd /media
3144 map gM cd /mnt
3145 map gs cd /srv
3146 map gr cd /
3147 map gR eval fm.cd(ranger.RANGERDIR)
3148 map g/ cd /
3149 map g? cd /usr/share/doc/ranger
3150
3151 # External Programs
3152 map E  edit
3153 map du shell -p du --max-depth=1 -h --apparent-size
3154 map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
3155 map yp shell -d echo -n %d/%f | xsel -i
3156 map yd shell -d echo -n %d    | xsel -i
3157 map yn shell -d echo -n %f    | xsel -i
3158
3159 # Filesystem Operations
3160 map =  chmod
3161
3162 map cw console rename
3163 map A  eval fm.open_console('rename ' + fm.thisfile.basename)
3164 map I  eval fm.open_console('rename ' + fm.thisfile.basename, position=7)
3165
3166 map pp paste
3167 map po paste overwrite=True
3168 map pl paste_symlink relative=False
3169 map pL paste_symlink relative=True
3170 map phl paste_hardlink
3171 map pht paste_hardlinked_subtree
3172
3173 map dd cut
3174 map ud uncut
3175 map da cut mode=add
3176 map dr cut mode=remove
3177
3178 map yy copy
3179 map uy uncut
3180 map ya copy mode=add
3181 map yr copy mode=remove
3182
3183 # Temporary workarounds
3184 map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
3185 map dG  eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
3186 map dj  eval fm.cut(dirarg=dict(down=1), narg=quantifier)
3187 map dk  eval fm.cut(dirarg=dict(up=1), narg=quantifier)
3188 map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
3189 map yG  eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
3190 map yj  eval fm.copy(dirarg=dict(down=1), narg=quantifier)
3191 map yk  eval fm.copy(dirarg=dict(up=1), narg=quantifier)
3192
3193 # Searching
3194 map /  console search
3195 map n  search_next
3196 map N  search_next forward=False
3197 map ct search_next order=tag
3198 map cs search_next order=size
3199 map ci search_next order=mimetype
3200 map cc search_next order=ctime
3201 map cm search_next order=mtime
3202 map ca search_next order=atime
3203
3204 # Tabs
3205 map <C-n>     tab_new ~
3206 map <C-w>     tab_close
3207 map <TAB>     tab_move 1
3208 map <S-TAB>   tab_move -1
3209 map <A-Right> tab_move 1
3210 map <A-Left>  tab_move -1
3211 map gt        tab_move 1
3212 map gT        tab_move -1
3213 map gn        tab_new ~
3214 map gc        tab_close
3215 map uq        tab_restore
3216 map <a-1>     tab_open 1
3217 map <a-2>     tab_open 2
3218 map <a-3>     tab_open 3
3219 map <a-4>     tab_open 4
3220 map <a-5>     tab_open 5
3221 map <a-6>     tab_open 6
3222 map <a-7>     tab_open 7
3223 map <a-8>     tab_open 8
3224 map <a-9>     tab_open 9
3225
3226 # Sorting
3227 map or toggle_option sort_reverse
3228 map os chain set sort=size;      set sort_reverse=False
3229 map ob chain set sort=basename;  set sort_reverse=False
3230 map on chain set sort=natural;   set sort_reverse=False
3231 map om chain set sort=mtime;     set sort_reverse=False
3232 map oc chain set sort=ctime;     set sort_reverse=False
3233 map oa chain set sort=atime;     set sort_reverse=False
3234 map ot chain set sort=type;      set sort_reverse=False
3235
3236 map oS chain set sort=size;      set sort_reverse=True
3237 map oB chain set sort=basename;  set sort_reverse=True
3238 map oN chain set sort=natural;   set sort_reverse=True
3239 map oM chain set sort=mtime;     set sort_reverse=True
3240 map oC chain set sort=ctime;     set sort_reverse=True
3241 map oA chain set sort=atime;     set sort_reverse=True
3242 map oT chain set sort=type;      set sort_reverse=True
3243
3244 map dc get_cumulative_size
3245
3246 # Settings
3247 map zc    toggle_option collapse_preview
3248 map zd    toggle_option sort_directories_first
3249 map zh    toggle_option show_hidden
3250 map <C-h> toggle_option show_hidden
3251 map zi    toggle_option flushinput
3252 map zm    toggle_option mouse_enabled
3253 map zp    toggle_option preview_files
3254 map zP    toggle_option preview_directories
3255 map zs    toggle_option sort_case_insensitive
3256 map zu    toggle_option autoupdate_cumulative_size
3257 map zv    toggle_option use_preview_script
3258 map zf    console filter
3259
3260 # Bookmarks
3261 map `<any>  enter_bookmark %any
3262 map '<any>  enter_bookmark %any
3263 map m<any>  set_bookmark %any
3264 map um<any> unset_bookmark %any
3265
3266 map m<bg>   draw_bookmarks
3267 copymap m<bg>  um<bg> `<bg> '<bg>
3268
3269 # Generate all the chmod bindings with some python help:
3270 eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
3271 eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
3272 eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
3273 eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
3274 eval for arg in "rwxXst": cmd("map +{0}  shell -d chmod u+{0} %s".format(arg))
3275
3276 eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
3277 eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
3278 eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
3279 eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
3280 eval for arg in "rwxXst": cmd("map -{0}  shell -d chmod u-{0} %s".format(arg))
3281
3282 # ===================================================================
3283 # == Define keys for the console
3284 # ===================================================================
3285 # Note: Unmapped keys are passed directly to the console.
3286
3287 # Basic
3288 cmap <tab>   eval fm.ui.console.tab()
3289 cmap <s-tab> eval fm.ui.console.tab(-1)
3290 cmap <ESC>   eval fm.ui.console.close()
3291 cmap <CR>    eval fm.ui.console.execute()
3292 cmap <C-l>   redraw_window
3293
3294 copycmap <ESC> <C-c>
3295 copycmap <CR>  <C-j>
3296
3297 # Move around
3298 cmap <up>    eval fm.ui.console.history_move(-1)
3299 cmap <down>  eval fm.ui.console.history_move(1)
3300 cmap <left>  eval fm.ui.console.move(left=1)
3301 cmap <right> eval fm.ui.console.move(right=1)
3302 cmap <home>  eval fm.ui.console.move(right=0, absolute=True)
3303 cmap <end>   eval fm.ui.console.move(right=-1, absolute=True)
3304
3305 # Line Editing
3306 cmap <backspace>  eval fm.ui.console.delete(-1)
3307 cmap <delete>     eval fm.ui.console.delete(0)
3308 cmap <C-w>        eval fm.ui.console.delete_word()
3309 cmap <C-k>        eval fm.ui.console.delete_rest(1)
3310 cmap <C-u>        eval fm.ui.console.delete_rest(-1)
3311 cmap <C-y>        eval fm.ui.console.paste()
3312
3313 # And of course the emacs way
3314 copycmap <up>        <C-p>
3315 copycmap <down>      <C-n>
3316 copycmap <left>      <C-b>
3317 copycmap <right>     <C-f>
3318 copycmap <home>      <C-a>
3319 copycmap <end>       <C-e>
3320 copycmap <delete>    <C-d>
3321 copycmap <backspace> <C-h>
3322
3323 # Note: There are multiple ways to express backspaces.  <backspace> (code 263)
3324 # and <backspace2> (code 127).  To be sure, use both.
3325 copycmap <backspace> <backspace2>
3326
3327 # This special expression allows typing in numerals:
3328 cmap <allow_quantifiers> false
3329
3330 # ===================================================================
3331 # == Pager Keybindings
3332 # ===================================================================
3333
3334 # Movement
3335 pmap  <down>      pager_move  down=1
3336 pmap  <up>        pager_move  up=1
3337 pmap  <left>      pager_move  left=4
3338 pmap  <right>     pager_move  right=4
3339 pmap  <home>      pager_move  to=0
3340 pmap  <end>       pager_move  to=-1
3341 pmap  <pagedown>  pager_move  down=1.0  pages=True
3342 pmap  <pageup>    pager_move  up=1.0    pages=True
3343 pmap  <C-d>       pager_move  down=0.5  pages=True
3344 pmap  <C-u>       pager_move  up=0.5    pages=True
3345
3346 copypmap <UP>       k  <C-p>
3347 copypmap <DOWN>     j  <C-n> <CR>
3348 copypmap <LEFT>     h
3349 copypmap <RIGHT>    l
3350 copypmap <HOME>     g
3351 copypmap <END>      G
3352 copypmap <C-d>      d
3353 copypmap <C-u>      u
3354 copypmap <PAGEDOWN> n  f  <C-F>  <Space>
3355 copypmap <PAGEUP>   p  b  <C-B>
3356
3357 # Basic
3358 pmap     <ESC> pager_close
3359 copypmap <ESC> q Q i <F3>
3360 pmap E      edit_file
3361
3362 # ===================================================================
3363 # == Taskview Keybindings
3364 # ===================================================================
3365
3366 # Movement
3367 tmap <up>        taskview_move up=1
3368 tmap <down>      taskview_move down=1
3369 tmap <home>      taskview_move to=0
3370 tmap <end>       taskview_move to=-1
3371 tmap <pagedown>  taskview_move down=1.0  pages=True
3372 tmap <pageup>    taskview_move up=1.0    pages=True
3373 tmap <C-d>       taskview_move down=0.5  pages=True
3374 tmap <C-u>       taskview_move up=0.5    pages=True
3375
3376 copytmap <UP>       k  <C-p>
3377 copytmap <DOWN>     j  <C-n> <CR>
3378 copytmap <HOME>     g
3379 copytmap <END>      G
3380 copytmap <C-u>      u
3381 copytmap <PAGEDOWN> n  f  <C-F>  <Space>
3382 copytmap <PAGEUP>   p  b  <C-B>
3383
3384 # Changing priority and deleting tasks
3385 tmap J          eval -q fm.ui.taskview.task_move(-1)
3386 tmap K          eval -q fm.ui.taskview.task_move(0)
3387 tmap dd         eval -q fm.ui.taskview.task_remove()
3388 tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
3389 tmap <pageup>   eval -q fm.ui.taskview.task_move(0)
3390 tmap <delete>   eval -q fm.ui.taskview.task_remove()
3391
3392 # Basic
3393 tmap <ESC> taskview_close
3394 copytmap <ESC> q Q w <C-c>
3395 #+end_src
3396
3397 *** scope.sh
3398 :PROPERTIES:
3399 :header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
3400 :END:
3401
3402 #+begin_src sh :tangle no
3403 # ranger supports enhanced previews.  If the option "use_preview_script"
3404 # is set to True and this file exists, this script will be called and its
3405 # output is displayed in ranger.  ANSI color codes are supported.
3406
3407 # NOTES: This script is considered a configuration file.  If you upgrade
3408 # ranger, it will be left untouched. (You must update it yourself.)
3409 # Also, ranger disables STDIN here, so interactive scripts won't work properly
3410
3411 # Meanings of exit codes:
3412 # code | meaning    | action of ranger
3413 # -----+------------+-------------------------------------------
3414 # 0    | success    | success. display stdout as preview
3415 # 1    | no preview | failure. display no preview at all
3416 # 2    | plain text | display the plain content of the file
3417 # 3    | fix width  | success. Don't reload when width changes
3418 # 4    | fix height | success. Don't reload when height changes
3419 # 5    | fix both   | success. Don't ever reload
3420
3421 # Meaningful aliases for arguments:
3422 path="$1"    # Full path of the selected file
3423 width="$2"   # Width of the preview pane (number of fitting characters)
3424 height="$3"  # Height of the preview pane (number of fitting characters)
3425
3426 maxln=200    # Stop after $maxln lines.  Can be used like ls | head -n $maxln
3427
3428 # Find out something about the file:
3429 mimetype=$(file --mime-type -Lb "$path")
3430 extension=${path##*.}
3431
3432 # Functions:
3433 # runs a command and saves its output into $output.  Useful if you need
3434 # the return value AND want to use the output in a pipe
3435 try() { output=$(eval '"$@"'); }
3436
3437 # writes the output of the previouosly used "try" command
3438 dump() { echo "$output"; }
3439
3440 # a common post-processing function used after most commands
3441 trim() { head -n "$maxln"; }
3442
3443 # wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
3444 highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }
3445
3446 case "$extension" in
3447     # Archive extensions:
3448     7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
3449     rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
3450         try als "$path" && { dump | trim; exit 0; }
3451         try acat "$path" && { dump | trim; exit 3; }
3452         try bsdtar -lf "$path" && { dump | trim; exit 0; }
3453         exit 1;;
3454     rar)
3455         try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
3456     # PDF documents:
3457     pdf)
3458         try pdftotext -l 10 -nopgbrk -q "$path" - && \
3459             { dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
3460     # BitTorrent Files
3461     torrent)
3462         try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
3463     # HTML Pages:
3464     htm|html|xhtml)
3465         try w3m    -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3466         try lynx   -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3467         try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3468         ;; # fall back to highlight/cat if the text browsers fail
3469 esac
3470
3471 case "$mimetype" in
3472     # Syntax highlight for text files:
3473     text/* | */xml)
3474         try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
3475     # Ascii-previews of images:
3476     image/*)
3477         img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
3478     # Display information about media files:
3479     video/* | audio/*)
3480         exiftool "$path" && exit 5
3481         # Use sed to remove spaces so the output fits into the narrow window
3482         try mediainfo "$path" && { dump | trim | sed 's/  \+:/: /;';  exit 5; } || exit 1;;
3483 esac
3484
3485 exit 1
3486 #+end_src
3487
3488 ** redshift
3489 :PROPERTIES:
3490 :header-args+: :tangle ~/.config/redshift.conf :comments none
3491 :END:
3492
3493 #+begin_src conf
3494 ; Global settings for redshift
3495 [redshift]
3496 ; Set the day and night screen temperatures (Neutral is 6500K)
3497 ;temp-day=5700
3498 ;temp-night=3500
3499
3500 ;temp-day=6500
3501 temp-day=6200
3502 ;temp-night=4800
3503 ;temp-night=5000
3504 ;temp-night=4500
3505 temp-night=4000
3506
3507 ; Enable/Disable a smooth transition between day and night
3508 ; 0 will cause a direct change from day to night screen temperature.
3509 ; 1 will gradually increase or decrease the screen temperature.
3510 transition=1
3511
3512 ; Set the screen brightness. Default is 1.0.
3513 ;brightness=0.9
3514 ; It is also possible to use different settings for day and night
3515 ; since version 1.8.
3516 ;brightness-day=0.7
3517 ;brightness-night=0.4
3518 ; Set the screen gamma (for all colors, or each color channel
3519 ; individually)
3520 ;gamma=0.8
3521 ;gamma=1.0
3522 ;gamma=0.8:0.7:0.8
3523 ; This can also be set individually for day and night since
3524 ; version 1.10.
3525 ;gamma-day=0.8:0.7:0.8
3526 ;gamma-night=0.6
3527
3528 ; Set the location-provider: 'geoclue2' or 'manual'
3529 ; type 'redshift -l list' to see possible values.
3530 ; The location provider settings are in a different section.
3531 ;location-provider=manual
3532 location-provider=geoclue2
3533
3534 ; Set the adjustment-method: 'randr', 'vidmode'
3535 ; type 'redshift -m list' to see all possible values.
3536 ; 'randr' is the preferred method, 'vidmode' is an older API.
3537 ; but works in some cases when 'randr' does not.
3538 ; The adjustment method settings are in a different section.
3539 adjustment-method=randr
3540
3541 ; Configuration of the location-provider:
3542 ; type 'redshift -l PROVIDER:help' to see the settings.
3543 ; ex: 'redshift -l manual:help'
3544 ; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
3545 ; are negative numbers.
3546 ;[manual]
3547 ;lat=48.1
3548 ;lon=11.6
3549
3550 ; Configuration of the adjustment-method
3551 ; type 'redshift -m METHOD:help' to see the settings.
3552 ; ex: 'redshift -m randr:help'
3553 ; In this example, randr is configured to adjust screen 1.
3554 ; Note that the numbering starts from 0, so this is actually the
3555 ; second screen. If this option is not specified, Redshift will try
3556 ; to adjust _all_ screens.
3557 ;[randr]
3558 ;screen=1
3559 #+end_src
3560
3561 ** rofi
3562 :PROPERTIES:
3563 :header-args+: :tangle ~/.config/rofi/config
3564 :END:
3565
3566 #+begin_src conf
3567 rofi.font: Ubuntu Mono 13
3568 ! rofi.font: Inconsolata 16
3569 ! rofi.font: Iosevka 13
3570 ! rofi.font: Source Code Pro 11
3571 rofi.modi: run,window
3572 ! rofi.width: 640
3573 rofi.width: 600
3574 !rofi.location: 2
3575 !rofi.yoffset: 200
3576 rofi.monitor: -1
3577 !rofi.lines: 10
3578
3579 !rofi.theme: /usr/share/rofi/themes//Arc.rasi
3580 !rofi.theme: /usr/share/rofi/themes//Paper.rasi
3581 !rofi.theme: /usr/share/rofi/themes//sidebar.rasi
3582
3583 rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
3584 #+end_src
3585
3586 ** rofi-pass
3587 :PROPERTIES:
3588 :header-args+: :tangle ~/.config/rofi-pass/config
3589 :END:
3590
3591 #+begin_src conf
3592 # permanently set alternative root dir
3593 # root=/path/to/root
3594
3595 # rofi command. Make sure to have "$@" as last argument
3596 _rofi () {
3597     #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
3598     rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
3599 }
3600
3601 # xdotool needs the keyboard layout to be set using setxkbmap
3602 # You can do this in your autostart scripts (e.g. xinitrc)
3603
3604 # If for some reason, you cannot do this, you can set the command here.
3605 # and set fix_layout to true
3606 fix_layout=false
3607
3608 layout_cmd () {
3609   setxkbmap us
3610 }
3611
3612 # fields to be used
3613 URL_field='url'
3614 USERNAME_field='user'
3615 AUTOTYPE_field='autotype'
3616
3617 # delay to be used for :delay keyword
3618 delay=2
3619
3620 ## Programs to be used
3621 # Editor
3622 EDITOR='gvim -f'
3623
3624 # Browser
3625 BROWSER='chromium'
3626
3627 ## Misc settings
3628
3629 default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
3630 auto_enter='false'
3631 notify='false'
3632 default_autotype='user :tab pass'
3633
3634 # color of the help messages
3635 # leave empty for autodetection
3636 help_color="#4872FF"
3637
3638 # Clipboard settings
3639 # Possible options: primary, clipboard, both
3640 clip=primary
3641
3642 # Options for generating new password entries
3643 # default_user is also used for password files that have no user field.
3644 default_user=aminb
3645 default_user2=aminban
3646 password_length=30
3647
3648 # Custom Keybindings
3649 #autotype="Alt+1"
3650 autotype="Alt+m"
3651 type_user="Alt+2"
3652 type_pass="Alt+3"
3653 open_url="Alt+4"
3654 copy_name="Alt+u"
3655 copy_url="Alt+l"
3656 copy_pass="Alt+p"
3657 show="Alt+o"
3658 copy_entry="Alt+2"
3659 type_entry="Alt+1"
3660 copy_menu="Alt+c"
3661 action_menu="Alt+a"
3662 type_menu="Alt+t"
3663 help="Alt+h"
3664 switch="Alt+x"
3665 insert_pass="Alt+n"
3666 #+end_src
3667
3668 ** sway
3669 :PROPERTIES:
3670 :header-args+: :tangle ~/.config/sway/config
3671 :END:
3672
3673 #+begin_src conf
3674 exec xrdb .Xresources
3675 exec dunst
3676 ### Variables
3677 # super
3678 set $mod Mod4
3679 # alt
3680 set $mod2 Mod1
3681 set $left h
3682 set $down j
3683 set $up k
3684 set $right l
3685 set $term urxvt
3686 set $menu rofi -show run -display-run '> ' -display-window ' 🗔 '
3687
3688 ### Output configuration
3689 #
3690 # Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/)
3691 output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
3692 #
3693 # Example configuration:
3694 #
3695 #   output HDMI-A-1 resolution 1920x1080 position 1920,0
3696 #
3697 # You can get the names of your outputs by running: swaymsg -t get_outputs
3698
3699 ### Idle configuration
3700 #
3701 # Example configuration:
3702 #
3703 #exec swayidle \
3704 #    timeout 300 'swaylock -c 000000' \
3705 #    timeout 600 'swaymsg "output * dpms off"' \
3706 #       resume 'swaymsg "output * dpms on"' \
3707 #    before-sleep 'swaylock -c 000000'
3708 #
3709 # This will lock your screen after 300 seconds of inactivity, then turn off
3710 # your displays after another 600 seconds, and turn your screens back on when
3711 # resumed. It will also lock your screen before your computer goes to sleep.
3712
3713 ### Input configuration
3714
3715 input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
3716     dwt enabled
3717     tap enabled
3718     natural_scroll enabled
3719     middle_emulation enabled
3720     click_method clickfinger
3721 }
3722
3723 input "1:1:AT_Translated_Set_2_keyboard" {
3724     repeat_delay 200
3725     repeat_rate 45
3726     xkb_layout us,ir
3727     xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
3728 }
3729
3730
3731 ### Key bindings
3732 #
3733 # Basics:
3734 #
3735     # start a terminal
3736     bindsym $mod+Return exec $term
3737
3738     # kill focused window
3739     bindsym $mod+Shift+q kill
3740
3741     # start your launcher
3742     bindsym $mod+d exec $menu
3743
3744     # Drag floating windows by holding down $mod and left mouse button.
3745     # Resize them with right mouse button + $mod.
3746     # Despite the name, also works for non-floating windows.
3747     # Change normal to inverse to use left mouse button for resizing and right
3748     # mouse button for dragging.
3749     floating_modifier $mod normal
3750
3751     # reload the configuration file
3752     bindsym $mod+Shift+c reload
3753
3754     # exit sway (logs you out of your wayland session)
3755     bindsym $mod+Shift+e exit
3756
3757     bindsym $mod+apostrophe exec rofi-light        # rofi-based brightness chooser
3758     bindsym XF86MonBrightnessUp exec light -A 5    # increase screen brightness
3759     bindsym XF86MonBrightnessDown exec light -U 5  # decrease screen brightness
3760
3761     bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
3762     bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
3763     bindsym XF86AudioMute exec pamixer --toggle-mute
3764     bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
3765
3766     # original sway workspace switch and window move
3767     bindsym $mod+bracketleft workspace prev
3768     bindsym $mod+bracketright workspace next
3769     bindsym $mod+braceleft move container to workspace prev
3770     bindsym $mod+braceright move container to workspace next
3771
3772     # bspwm-esque workspace switch and window move
3773     bindsym $mod2+bracketleft exec sway-ws-util switch prev
3774     bindsym $mod2+bracketright exec sway-ws-util switch next
3775     bindsym $mod2+braceleft exec sway-ws-util move prev follow
3776     bindsym $mod2+braceright exec sway-ws-util move next follow
3777 #
3778 # Moving around:
3779 #
3780     # Move your focus around
3781     bindsym $mod+$left focus left
3782     bindsym $mod+$down focus down
3783     bindsym $mod+$up focus up
3784     bindsym $mod+$right focus right
3785     # or use $mod+[up|down|left|right]
3786     bindsym $mod+Left focus left
3787     bindsym $mod+Down focus down
3788     bindsym $mod+Up focus up
3789     bindsym $mod+Right focus right
3790
3791     # _move_ the focused window with the same, but add Shift
3792     bindsym $mod+Shift+$left move left
3793     bindsym $mod+Shift+$down move down
3794     bindsym $mod+Shift+$up move up
3795     bindsym $mod+Shift+$right move right
3796     # ditto, with arrow keys
3797     bindsym $mod+Shift+Left move left
3798     bindsym $mod+Shift+Down move down
3799     bindsym $mod+Shift+Up move up
3800     bindsym $mod+Shift+Right move right
3801 #
3802 # Workspaces:
3803 #
3804     # switch to workspace
3805     bindsym $mod+1 workspace 1
3806     bindsym $mod+2 workspace 2
3807     bindsym $mod+3 workspace 3
3808     bindsym $mod+4 workspace 4
3809     bindsym $mod+5 workspace 5
3810     bindsym $mod+6 workspace 6
3811     bindsym $mod+7 workspace 7
3812     bindsym $mod+8 workspace 8
3813     bindsym $mod+9 workspace 9
3814     bindsym $mod+0 workspace 10
3815     # move focused container to workspace
3816     bindsym $mod+Shift+1 move container to workspace 1
3817     bindsym $mod+Shift+2 move container to workspace 2
3818     bindsym $mod+Shift+3 move container to workspace 3
3819     bindsym $mod+Shift+4 move container to workspace 4
3820     bindsym $mod+Shift+5 move container to workspace 5
3821     bindsym $mod+Shift+6 move container to workspace 6
3822     bindsym $mod+Shift+7 move container to workspace 7
3823     bindsym $mod+Shift+8 move container to workspace 8
3824     bindsym $mod+Shift+9 move container to workspace 9
3825     bindsym $mod+Shift+0 move container to workspace 10
3826     # Note: workspaces can have any name you want, not just numbers.
3827     # We just use 1-10 as the default.
3828 #
3829 # Layout stuff:
3830 #
3831     # You can "split" the current object of your focus with
3832     # $mod+b or $mod+v, for horizontal and vertical splits
3833     # respectively.
3834     bindsym $mod+b splith
3835     bindsym $mod+v splitv
3836
3837     # Switch the current container between different layout styles
3838     bindsym $mod+s layout stacking
3839     bindsym $mod+w layout tabbed
3840     bindsym $mod+e layout toggle split
3841
3842     # Make the current focus fullscreen
3843     bindsym $mod+f fullscreen
3844
3845     # Toggle the current focus between tiling and floating mode
3846     bindsym $mod+Shift+space floating toggle
3847
3848     # Swap focus between the tiling area and the floating area
3849     bindsym $mod+space focus mode_toggle
3850
3851     # move focus to the parent container
3852     bindsym $mod+a focus parent
3853 #
3854 # Scratchpad:
3855 #
3856     # Sway has a "scratchpad", which is a bag of holding for windows.
3857     # You can send windows there and get them back later.
3858
3859     # Move the currently focused window to the scratchpad
3860     bindsym $mod+Shift+minus move scratchpad
3861
3862     # Show the next scratchpad window or hide the focused scratchpad window.
3863     # If there are multiple scratchpad windows, this command cycles through them.
3864     bindsym $mod+minus scratchpad show
3865 #
3866 # Resizing containers:
3867 #
3868 mode "resize" {
3869     # left will shrink the containers width
3870     # right will grow the containers width
3871     # up will shrink the containers height
3872     # down will grow the containers height
3873     bindsym $left resize shrink width 10px
3874     bindsym $down resize grow height 10px
3875     bindsym $up resize shrink height 10px
3876     bindsym $right resize grow width 10px
3877
3878     # ditto, with arrow keys
3879     bindsym Left resize shrink width 10px
3880     bindsym Down resize grow height 10px
3881     bindsym Up resize shrink height 10px
3882     bindsym Right resize grow width 10px
3883
3884     # return to default mode
3885     bindsym Return mode "default"
3886     bindsym Escape mode "default"
3887 }
3888 bindsym $mod+Shift+r mode "resize"
3889
3890 #
3891 # Status Bar:
3892 #
3893 # Read `man 5 sway-bar` for more information about this section.
3894 bar {
3895     position bottom
3896     colors {
3897         statusline #ffffff
3898         background #323232
3899         inactive_workspace #32323200 #32323200 #5c5c5c
3900     }
3901     status_command i3gs ~/.config/i3gs/config
3902 }
3903
3904 include /etc/sway/config.d/*
3905 #+end_src
3906
3907 ** TLP
3908
3909 *** TODO enigma
3910 *** plasma
3911
3912 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/default/tlp")
3913 # ------------------------------------------------------------------------------
3914 # tlp - Parameters for power saving
3915 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
3916
3917 # Hint: some features are disabled by default, remove the leading # to enable
3918 # them.
3919
3920 # Set to 0 to disable, 1 to enable TLP.
3921 TLP_ENABLE=1
3922
3923 # Operation mode when no power supply can be detected: AC, BAT.
3924 # Concerns some desktop and embedded hardware only.
3925 TLP_DEFAULT_MODE=AC
3926
3927 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
3928 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
3929 TLP_PERSISTENT_DEFAULT=0
3930
3931 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
3932 # Non-zero value enables, zero disables laptop mode.
3933 DISK_IDLE_SECS_ON_AC=0
3934 DISK_IDLE_SECS_ON_BAT=2
3935
3936 # Dirty page values (timeouts in secs).
3937 MAX_LOST_WORK_SECS_ON_AC=15
3938 MAX_LOST_WORK_SECS_ON_BAT=60
3939
3940 # Hint: CPU parameters below are disabled by default, remove the leading #
3941 # to enable them, otherwise kernel default values are used.
3942
3943 # Select a CPU frequency scaling governor.
3944 # Intel Core i processor with intel_pstate driver:
3945 #   powersave(*), performance.
3946 # Older hardware with acpi-cpufreq driver:
3947 #   ondemand(*), powersave, performance, conservative, schedutil.
3948 # (*) is recommended.
3949 # Hint: use tlp-stat -p to show the active driver and available governors.
3950 # Important:
3951 #   powersave for intel_pstate and ondemand for acpi-cpufreq are power
3952 #   efficient for *almost all* workloads and therefore kernel and most
3953 #   distributions have chosen them as defaults. If you still want to change,
3954 #   you should know what you're doing! You *must* disable your distribution's
3955 #   governor settings or conflicts will occur.
3956 #CPU_SCALING_GOVERNOR_ON_AC=powersave
3957 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
3958
3959 # Set the min/max frequency available for the scaling governor.
3960 # Possible values strongly depend on your CPU. For available frequencies see
3961 # the output of tlp-stat -p.
3962 #CPU_SCALING_MIN_FREQ_ON_AC=0
3963 #CPU_SCALING_MAX_FREQ_ON_AC=0
3964 #CPU_SCALING_MIN_FREQ_ON_BAT=0
3965 #CPU_SCALING_MAX_FREQ_ON_BAT=0
3966
3967 # Set energy performance hints (HWP) for Intel P-state governor:
3968 #   performance, balance_performance, default, balance_power, power
3969 # Values are given in order of increasing power saving.
3970 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
3971 CPU_HWP_ON_AC=balance_performance
3972 CPU_HWP_ON_BAT=balance_power
3973
3974 # Set Intel P-state performance: 0..100 (%).
3975 # Limit the max/min P-state to control the power dissipation of the CPU.
3976 # Values are stated as a percentage of the available performance.
3977 # Requires an Intel Core i processor with intel_pstate driver.
3978 #CPU_MIN_PERF_ON_AC=0
3979 #CPU_MAX_PERF_ON_AC=100
3980 #CPU_MIN_PERF_ON_BAT=0
3981 #CPU_MAX_PERF_ON_BAT=30
3982
3983 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
3984 # Requires an Intel Core i processor.
3985 # Important:
3986 # - This may conflict with your distribution's governor settings
3987 # - A value of 1 does *not* activate boosting, it just allows it
3988 #CPU_BOOST_ON_AC=1
3989 #CPU_BOOST_ON_BAT=0
3990
3991 # Minimize number of used CPU cores/hyper-threads under light load conditions:
3992 #   0=disable, 1=enable.
3993 SCHED_POWERSAVE_ON_AC=0
3994 SCHED_POWERSAVE_ON_BAT=1
3995
3996 # Kernel NMI Watchdog:
3997 #   0=disable (default, saves power), 1=enable (for kernel debugging only).
3998 NMI_WATCHDOG=0
3999
4000 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
4001 # Frequency voltage pairs are written to:
4002 #   /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
4003 # CAUTION: only use this, if you thoroughly understand what you are doing!
4004 #PHC_CONTROLS="F:V F:V F:V F:V"
4005
4006 # Set CPU performance versus energy savings policy:
4007 #   performance, balance-performance, default, balance-power, power.
4008 # Values are given in order of increasing power saving.
4009 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
4010 ENERGY_PERF_POLICY_ON_AC=performance
4011 ENERGY_PERF_POLICY_ON_BAT=balance-power
4012
4013 # Disk devices; separate multiple devices with spaces (default: sda).
4014 # Devices can be specified by disk ID also (lookup with: tlp diskid).
4015 DISK_DEVICES="sda sdb"
4016
4017 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
4018 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
4019 # Separate values for multiple disks with spaces. Use the special value 'keep'
4020 # to keep the hardware default for the particular disk.
4021 DISK_APM_LEVEL_ON_AC="254 254"
4022 DISK_APM_LEVEL_ON_BAT="128 128"
4023
4024 # Hard disk spin down timeout:
4025 #   0:        spin down disabled
4026 #   1..240:   timeouts from 5s to 20min (in units of 5s)
4027 #   241..251: timeouts from 30min to 5.5 hours (in units of 30min)
4028 # See 'man hdparm' for details.
4029 # Separate values for multiple disks with spaces. Use the special value 'keep'
4030 # to keep the hardware default for the particular disk.
4031 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
4032 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
4033
4034 # Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
4035 # Separate values for multiple disks with spaces. Use the special value 'keep'
4036 # to keep the kernel default scheduler for the particular disk.
4037 #DISK_IOSCHED="cfq cfq"
4038
4039 # AHCI link power management (ALPM) for disk devices:
4040 #   min_power, med_power_with_dipm(*), medium_power, max_performance.
4041 # (*) Kernel >= 4.15 required, then recommended.
4042 # Multiple values separated with spaces are tried sequentially until success.
4043 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
4044 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
4045
4046 # Exclude host devices from AHCI link power management.
4047 # Separate multiple hosts with spaces.
4048 #SATA_LINKPWR_BLACKLIST="host1"
4049
4050 # Runtime Power Management for AHCI host and disks devices:
4051 #   on=disable, auto=enable.
4052 # EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
4053 #AHCI_RUNTIME_PM_ON_AC=on
4054 #AHCI_RUNTIME_PM_ON_BAT=on
4055
4056 # Seconds of inactivity before disk is suspended.
4057 AHCI_RUNTIME_PM_TIMEOUT=15
4058
4059 # PCI Express Active State Power Management (PCIe ASPM):
4060 #   default, performance, powersave.
4061 PCIE_ASPM_ON_AC=performance
4062 PCIE_ASPM_ON_BAT=powersave
4063
4064 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
4065 # auto = mid on BAT, high on AC; default = use hardware defaults.
4066 RADEON_POWER_PROFILE_ON_AC=high
4067 RADEON_POWER_PROFILE_ON_BAT=low
4068
4069 # Radeon dynamic power management method (DPM): battery, performance.
4070 RADEON_DPM_STATE_ON_AC=performance
4071 RADEON_DPM_STATE_ON_BAT=battery
4072
4073 # Radeon DPM performance level: auto, low, high; auto is recommended.
4074 RADEON_DPM_PERF_LEVEL_ON_AC=auto
4075 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4076
4077 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4078 WIFI_PWR_ON_AC=off
4079 WIFI_PWR_ON_BAT=on
4080
4081 # Disable wake on LAN: Y/N.
4082 WOL_DISABLE=Y
4083
4084 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4085 # A value of 0 disables, >=1 enables power saving (recommended: 1).
4086 SOUND_POWER_SAVE_ON_AC=0
4087 SOUND_POWER_SAVE_ON_BAT=0
4088
4089 # Disable controller too (HDA only): Y/N.
4090 SOUND_POWER_SAVE_CONTROLLER=N
4091
4092 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4093 # Drive can be powered on again by releasing (and reinserting) the eject lever
4094 # or by pressing the disc eject button on newer models.
4095 # Note: an UltraBay/MediaBay hard disk is never powered off.
4096 BAY_POWEROFF_ON_AC=0
4097 BAY_POWEROFF_ON_BAT=0
4098 # Optical drive device to power off (default sr0).
4099 BAY_DEVICE="sr0"
4100
4101 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4102 RUNTIME_PM_ON_AC=on
4103 RUNTIME_PM_ON_BAT=auto
4104
4105 # Exclude PCI(e) device adresses the following list from Runtime PM
4106 # (separate with spaces). Use lspci to get the adresses (1st column).
4107 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4108 RUNTIME_PM_BLACKLIST="01:00.0"
4109
4110 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4111 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4112 # prevents accidential power-on of dGPU in hybrid graphics setups.
4113 # Use "" to disable the feature completely.
4114 # Separate multiple drivers with spaces.
4115 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4116
4117 # Set to 0 to disable, 1 to enable USB autosuspend feature.
4118 USB_AUTOSUSPEND=1
4119
4120 # Exclude listed devices from USB autosuspend (separate with spaces).
4121 # Use lsusb to get the ids.
4122 # Note: input devices (usbhid) are excluded automatically
4123 #USB_BLACKLIST="1111:2222 3333:4444"
4124
4125 # Bluetooth devices are excluded from USB autosuspend:
4126 #   0=do not exclude, 1=exclude.
4127 USB_BLACKLIST_BTUSB=0
4128
4129 # Phone devices are excluded from USB autosuspend:
4130 #   0=do not exclude, 1=exclude (enable charging).
4131 USB_BLACKLIST_PHONE=0
4132
4133 # Printers are excluded from USB autosuspend:
4134 #   0=do not exclude, 1=exclude.
4135 USB_BLACKLIST_PRINTER=1
4136
4137 # WWAN devices are excluded from USB autosuspend:
4138 #   0=do not exclude, 1=exclude.
4139 USB_BLACKLIST_WWAN=1
4140
4141 # Include listed devices into USB autosuspend even if already excluded
4142 # by the blacklists above (separate with spaces).
4143 # Use lsusb to get the ids.
4144 #USB_WHITELIST="1111:2222 3333:4444"
4145
4146 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4147 # (workaround for USB devices that cause shutdown problems).
4148 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4149
4150 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4151 # on system startup: 0=disable, 1=enable.
4152 # Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4153 #   are ignored when this is enabled!
4154 #RESTORE_DEVICE_STATE_ON_STARTUP=0
4155 RESTORE_DEVICE_STATE_ON_STARTUP=1
4156
4157 # Radio devices to disable on startup: bluetooth, wifi, wwan.
4158 # Separate multiple devices with spaces.
4159 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
4160
4161 # Radio devices to enable on startup: bluetooth, wifi, wwan.
4162 # Separate multiple devices with spaces.
4163 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4164
4165 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4166 # (workaround for devices that are blocking shutdown).
4167 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4168
4169 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4170 # (to prevent other operating systems from missing radios).
4171 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4172
4173 # Radio devices to enable on AC: bluetooth, wifi, wwan.
4174 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4175
4176 # Radio devices to disable on battery: bluetooth, wifi, wwan.
4177 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4178
4179 # Radio devices to disable on battery when not in use (not connected):
4180 #   bluetooth, wifi, wwan.
4181 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4182
4183 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4184 # required). Charging starts when the remaining capacity falls below the
4185 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4186 # Main / Internal battery (values in %)
4187 #START_CHARGE_THRESH_BAT0=75
4188 #STOP_CHARGE_THRESH_BAT0=80
4189 # Ultrabay / Slice / Replaceable battery (values in %)
4190 #START_CHARGE_THRESH_BAT1=75
4191 #STOP_CHARGE_THRESH_BAT1=80
4192
4193 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4194 #RESTORE_THRESHOLDS_ON_BAT=1
4195
4196 # ------------------------------------------------------------------------------
4197 # tlp-rdw - Parameters for the radio device wizard
4198 # Possible devices: bluetooth, wifi, wwan.
4199
4200 # Hints:
4201 # - Parameters are disabled by default, remove the leading # to enable them
4202 # - Separate multiple radio devices with spaces
4203
4204 # Radio devices to disable on connect.
4205 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4206 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4207 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4208
4209 # Radio devices to enable on disconnect.
4210 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4211 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4212 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4213
4214 # Radio devices to enable/disable when docked.
4215 #DEVICES_TO_ENABLE_ON_DOCK=""
4216 #DEVICES_TO_DISABLE_ON_DOCK=""
4217
4218 # Radio devices to enable/disable when undocked.
4219 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4220 #DEVICES_TO_DISABLE_ON_UNDOCK=""
4221 #+end_src
4222
4223 ** X
4224
4225 *** xprofile
4226 :PROPERTIES:
4227 :header-args+: :tangle ~/.xprofile
4228 :END:
4229
4230 =~/.xprofile= is similar in style to =~/.xinitrc=, but on the
4231 contrary, it's automatically sourced by LightDM, my display manager of
4232 choice.
4233
4234 #+begin_src sh :tangle no
4235 xset -b  # disable bell
4236 xset r rate 200 45  # repeat delay (ms) and rate (repeats/sec)
4237
4238 # setxkbmap -option compose:ralt
4239
4240 setxkbmap -option ctrl:nocaps          # turn capslock into control
4241 setxkbmap -option altwin:swap_alt_win  # swap alt and super
4242
4243 if [ $(hostname) = "plasma" ]
4244 then
4245     setxkbmap -option ctrl:rctrl_ralt  # turn right control into right alt
4246 fi
4247
4248 if [ $(hostname) = "enigma" ]
4249 then
4250     xmodmap -e "keycode 135 = Alt_R"  # remap menu key to alt
4251 fi
4252
4253 light -Scrs "intel_backlight" 2
4254
4255 source $HOME/.zprofile
4256
4257 export _JAVA_AWT_WM_NONREPARENTING=1
4258 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4259
4260 if [ $(hostname) = "plasma" ]
4261 then
4262     unlock-def-gk.py &
4263 fi
4264
4265 bspwm &
4266 #+end_src
4267
4268 *** X resources
4269
4270 **** Xresources
4271 :PROPERTIES:
4272 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
4273 :END:
4274
4275 #+begin_src conf-xdefaults
4276 #include ".Xresources.d/fonts"
4277 ! #include ".Xresources.d/colors"
4278 #include ".Xresources.d/emacs"
4279 #include ".Xresources.d/rxvt-unicode"
4280 #+end_src
4281
4282 **** Xresources.d
4283
4284 ***** fonts
4285 :PROPERTIES:
4286 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
4287 :END:
4288
4289 #+begin_src conf-xdefaults
4290 Xft.lcdfilter: lcddefault
4291 Xft.antialias: true
4292 Xft.autohint: 0
4293 Xft.hinting: true
4294 Xft.hintstyle: hintslight
4295 ! Xft.hintstyle: hintfull
4296 Xft.rgba: rgb
4297 Xft.dpi: 96
4298 #+end_src
4299
4300 ***** colors
4301 :PROPERTIES:
4302 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
4303 :END:
4304
4305 #+begin_src conf-xdefaults :tangle no
4306 #include "gruvbox-light.xresources"
4307 ! #include "gruvbox-dark.xresources"
4308 #include "gruvbox-urxvt256.xresources"
4309 #+end_src
4310
4311 #+begin_src conf-xdefaults :tangle no
4312 ! -----------------------------------------------------------------------------
4313 ! File: gruvbox-light.xresources
4314 ! Description: Retro groove colorscheme generalized
4315 ! Author: morhetz <morhetz@gmail.com>
4316 ! Source: https://github.com/morhetz/gruvbox-generalized
4317 ! Last Modified: 6 Sep 2014
4318 ! -----------------------------------------------------------------------------
4319
4320 ! hard contrast: *background: #f9f5d7
4321 *background: #fbf1c7
4322 ! soft contrast: *background: #f2e5bc
4323 *foreground: #3c3836
4324 ! Black + DarkGrey
4325 *color0:  #fdf4c1
4326 *color8:  #928374
4327 ! DarkRed + Red
4328 *color1:  #cc241d
4329 *color9:  #9d0006
4330 ! DarkGreen + Green
4331 *color2:  #98971a
4332 *color10: #79740e
4333 ! DarkYellow + Yellow
4334 *color3:  #d79921
4335 *color11: #b57614
4336 ! DarkBlue + Blue
4337 *color4:  #458588
4338 *color12: #076678
4339 ! DarkMagenta + Magenta
4340 *color5:  #b16286
4341 *color13: #8f3f71
4342 ! DarkCyan + Cyan
4343 *color6:  #689d6a
4344 *color14: #427b58
4345 ! LightGrey + White
4346 *color7:  #7c6f64
4347 *color15: #3c3836
4348 #+end_src
4349
4350 #+begin_src conf-xdefaults :tangle no
4351 ! -----------------------------------------------------------------------------
4352 ! File: gruvbox-dark.xresources
4353 ! Description: Retro groove colorscheme generalized
4354 ! Author: morhetz <morhetz@gmail.com>
4355 ! Source: https://github.com/morhetz/gruvbox-generalized
4356 ! Last Modified: 6 Sep 2014
4357 ! -----------------------------------------------------------------------------
4358
4359 ! hard contrast: *background: #1d2021
4360 *background: #282828
4361 ! soft contrast: *background: #32302f
4362 *foreground: #ebdbb2
4363 ! Black + DarkGrey
4364 *color0:  #282828
4365 *color8:  #928374
4366 ! DarkRed + Red
4367 *color1:  #cc241d
4368 *color9:  #fb4934
4369 ! DarkGreen + Green
4370 *color2:  #98971a
4371 *color10: #b8bb26
4372 ! DarkYellow + Yellow
4373 *color3:  #d79921
4374 *color11: #fabd2f
4375 ! DarkBlue + Blue
4376 *color4:  #458588
4377 *color12: #83a598
4378 ! DarkMagenta + Magenta
4379 *color5:  #b16286
4380 *color13: #d3869b
4381 ! DarkCyan + Cyan
4382 *color6:  #689d6a
4383 *color14: #8ec07c
4384 ! LightGrey + White
4385 *color7:  #a89984
4386 *color15: #ebdbb2
4387 #+end_src
4388
4389 #+begin_src conf-xdefaults :tangle no
4390 ! -----------------------------------------------------------------------------
4391 ! File: gruvbox-urxvt256.xresources
4392 ! Description: Retro groove colorscheme generalized
4393 ! Author: morhetz <morhetz@gmail.com>
4394 ! Source: https://github.com/morhetz/gruvbox-generalized
4395 ! Last Modified: 13 Dec 2013
4396 ! -----------------------------------------------------------------------------
4397
4398 URxvt.color24:  #076678
4399 URxvt.color66:  #427b58
4400 URxvt.color88:  #9d0006
4401 URxvt.color96:  #8f3f71
4402 URxvt.color100: #79740e
4403 URxvt.color108: #8ec07c
4404 URxvt.color109: #83a598
4405 URxvt.color130: #af3a03
4406 URxvt.color136: #b57614
4407 URxvt.color142: #b8bb26
4408 URxvt.color167: #fb4934
4409 URxvt.color175: #d3869b
4410 URxvt.color208: #fe8019
4411 URxvt.color214: #fabd2f
4412 URxvt.color223: #ebdbb2
4413 URxvt.color228: #f2e5bc
4414 URxvt.color229: #fbf1c7
4415 URxvt.color230: #f9f5d7
4416 URxvt.color234: #1d2021
4417 URxvt.color235: #282828
4418 URxvt.color236: #32302f
4419 URxvt.color237: #3c3836
4420 URxvt.color239: #504945
4421 URxvt.color241: #665c54
4422 URxvt.color243: #7c6f64
4423 URxvt.color244: #928374
4424 URxvt.color245: #928374
4425 URxvt.color246: #a89984
4426 URxvt.color248: #bdae93
4427 URxvt.color250: #d5c4a1
4428 #+end_src
4429
4430 ***** emacs
4431 :PROPERTIES:
4432 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
4433 :END:
4434
4435 #+begin_src conf-xdefaults
4436 Emacs.menuBar: off
4437 Emacs.toolBar: off
4438 Emacs.verticalScrollBars: off
4439 Emacs.cursorBlink: off
4440 Emacs.FontBackend: xft,x
4441 ! Emacs.font: Ubuntu Mono-12
4442 ! Emacs.font: Triplicate T4C-11
4443 ! Emacs.font: Ubuntu Mono-10.5
4444 ! Emacs.font: Ubuntu Mono-12
4445 ! Emacs.font: Iosevka-11
4446
4447 ! Emacs.font: Fira Mono:size=15
4448 ! Emacs.font: DejaVu Sans Mono:size=15
4449 ! Emacs.font: Inconsolata:size=17
4450 ! Emacs.font: Inconsolata:size=16
4451 ! Emacs.font: Inconsolata LGC:size=14
4452 ! Emacs.font: Source Code Pro Medium-10.5
4453 Emacs.font: Ubuntu Mono:size=16
4454 ! Emacs.font: Iosevka:size=16
4455 #+end_src
4456
4457 ***** rxvt-unicode
4458 :PROPERTIES:
4459 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
4460 :END:
4461
4462 #+begin_src conf-xdefaults
4463 ! Font
4464 URxvt.font:             xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
4465 URxvt.boldFont:         xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
4466 URxvt.italicFont:       xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
4467 URxvt.bolditalicFont:   xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
4468
4469 URxvt.xftAntialias:     true
4470 URxvt.letterSpace:      0
4471
4472 URxvt.depth:                0
4473 URxvt.loginShell:           true
4474 URxvt.saveLines:            100000
4475 URxvt.internalBorder:       3
4476 URxvt.lineSpace:            0
4477 URxvt.scrollBar:            false
4478 URxvt.scrollStyle:          rxvt
4479 URxvt*scrollTtyOutput:      false
4480 URxvt*scrollWithBuffer:     true
4481 URxvt*scrollTtyKeypress:    true
4482 URxvt.keysym.Shift-Up:      command:\033]720;1\007
4483 URxvt.keysym.Shift-Down:    command:\033]721;1\007
4484
4485 URxvt.perl-ext-common:      default,clipboard,url-select,keyboard-select
4486 URxvt.perl-ext:             bidi
4487 URxvt.bidi.enabled:         1
4488 URxvt.url-select.launcher:  firefox
4489 URxvt.url-select.underline: true
4490 URxvt.keysym.M-u:           perl:url-select:select_next
4491 URxvt.keysym.M-Escape:      perl:keyboard-select:activate
4492 URxvt.keysym.M-s:           perl:keyboard-select:search
4493 URxvt.url-launcher:         /usr/bin/firefox
4494 URxvt.matcher.button:       1
4495 URxvt.iso14755:             false
4496 URxvt.iso14755_53:          false
4497 URxvt.keysym.M-c:           perl:clipboard:copy
4498 URxvt.keysym.M-v:           perl:clipboard:paste
4499 URxvt.keysym.C-A-V:         perl:clipboard:paste_escaped
4500 URxvt.keysym.C-Up:          font-size:increase
4501 URxvt.keysym.C-Down:        font-size:decrease
4502 URxvt.keysym.C-S-Up:        font-size:incglobal
4503 URxvt.keysym.C-S-Down:      font-size:decglobal
4504 URxvt.keysym.C-equal:       font-size:reset
4505 !URxvt.keysym.C-question:   font-size:show
4506
4507 URxvt.iconFile:             /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
4508
4509 !urxvt*foreground: white
4510 !urxvt*background: black
4511
4512 !*color0:  #2E3436
4513 !*color1:  #a40000
4514 !*color2:  #4E9A06
4515 !*color3:  #C4A000
4516 !*color4:  #3465A4
4517 !*color5:  #75507B
4518 !*color6:  #ce5c00
4519 !*color7:  #babdb9
4520 !*color8:  #555753
4521 !*color9:  #EF2929
4522 !*color10: #8AE234
4523 !*color11: #FCE94F
4524 !*color12: #729FCF
4525 !*color13: #AD7FA8
4526 !*color14: #fcaf3e
4527 !*color15: #EEEEEC
4528
4529 !URxvt.foreground: #C8C8C8
4530 !URxvt.background: #FFFFFF
4531
4532 !! black
4533 !*color0:  #2E3436
4534 !*color8:  #555753
4535 !! red
4536 !*color1:  #a40000
4537 !*color9:  #EF2929
4538 !! green
4539 !*color2:  #4E9A06
4540 !*color10: #8AE234
4541 !! yellow
4542 !*color3:  #C4A000
4543 !*color11: #FCE94F
4544 !! blue
4545 !*color4:  #3465A4
4546 !*color12: #729FCF
4547 !! purple
4548 !*color5:  #75507B
4549 !*color13: #AD7FA8
4550 !! orange (replaces cyan)
4551 !*color6:  #ce5c00
4552 !*color14: #fcaf3e
4553 !! white
4554 !*color7:  #babdb9
4555 !*color15: #EEEEEC
4556
4557 ! Tango colour theme for rxvt-unicode
4558 URxvt.background: #FFFFFF
4559 URxvt.foreground: #000000
4560
4561 ! Black
4562 URxvt.color0: #2E3436
4563 URxvt.color8: #757773
4564
4565 ! Red
4566 URxvt.color1: #CC0000
4567 URxvt.color9: #EF2929
4568
4569 ! Green
4570 URxvt.color2: #4E9A06
4571 URxvt.color10: #8AE234
4572
4573 ! Yellow
4574 URxvt.color3: #C4A000
4575 URxvt.color11: #FCE94F
4576
4577 ! Blue
4578 URxvt.color4: #3465A4
4579 URxvt.color12: #729FCF
4580
4581 ! Magenta
4582 URxvt.color5: #75507B
4583 URxvt.color13: #AD7FA8
4584
4585 !! Cyan
4586 !URxvt.color6: #06989A
4587 !URxvt.color14: #34E2E2
4588 ! orange (replaces cyan)
4589 *color6:  #ce5c00
4590 *color14: #fcaf3e
4591
4592 ! White
4593 URxvt.color7: #D3D7CF
4594 URxvt.color15: #EEEEEC
4595 #+end_src
4596
4597 ** XDG
4598 :PROPERTIES:
4599 :header-args+: :tangle ~/.config/user-dirs.dirs
4600 :END:
4601
4602 #+begin_src conf
4603 XDG_DESKTOP_DIR="$HOME/Desktop"
4604 XDG_DOCUMENTS_DIR="$HOME/usr/docs"
4605 XDG_DOWNLOAD_DIR="$HOME/usr/dls"
4606 XDG_MUSIC_DIR="$HOME/usr/music"
4607 XDG_PICTURES_DIR="$HOME/usr/pics"
4608 XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
4609 XDG_TEMPLATES_DIR="$HOME/usr/Templates"
4610 XDG_VIDEOS_DIR="$HOME/usr/vids"
4611 #+end_src
4612
4613 ** Zathura
4614 :PROPERTIES:
4615 :header-args+: :tangle ~/.config/zathura/zathurarc
4616 :END:
4617
4618 #+begin_src conf
4619 set smooth-scroll true
4620 set selection-clipboard clipboard
4621 set zoom-step 05
4622 set default-bg "#272727"
4623 set statusbar-bg "#272727"
4624 set inputbar-bg "#373737"
4625 #+end_src
4626
4627 ** Zsh
4628
4629 My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
4630 [[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
4631 installed.
4632
4633 *** zimrc
4634 :PROPERTIES:
4635 :header-args+: :tangle ~/.zimrc
4636 :END:
4637
4638 #+begin_src sh
4639
4640
4641 #################
4642 # CORE SETTINGS #
4643 #################
4644
4645 #
4646 # Zim settings
4647 #
4648
4649 # Select what modules you would like enabled.
4650 # The second line of modules may depend on options set by modules in the first
4651 # line. These dependencies are noted on the respective module's README.md.
4652 zmodules=(directory environment git git-info history input ssh utility custom \
4653           syntax-highlighting history-substring-search prompt completion)
4654
4655
4656 ###################
4657 # MODULE SETTINGS #
4658 ###################
4659
4660 #
4661 # Prompt
4662 #
4663
4664 # Set your desired prompt here
4665 zprompt_theme='pure'
4666 #PURE_PROMPT_SYMBOL=λ
4667 #PURE_PROMPT_SYMBOL=δ
4668 PURE_PROMPT_SYMBOL=➜
4669
4670 #
4671 # Completion
4672 #
4673
4674 # set an optional host-specific filename for the completion cache file
4675 # if none is provided, the default '.zcompdump' is used.
4676 #zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
4677
4678 #
4679 # Utility
4680 #
4681
4682 # Uncomment to enable command correction prompts
4683 # See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
4684 setopt CORRECT
4685
4686 #
4687 # Environment
4688 #
4689
4690 # Set the string below to the desired terminal title format string.
4691 # The terminal title is redrawn upon directory change, however, variables like
4692 # ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
4693 #   http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
4694 # The example below uses the following format: 'username@host:/current/directory'
4695 ztermtitle='%n@%m:%~'
4696
4697 #
4698 # Input
4699 #
4700
4701 # Uncomment to enable double-dot expansion.
4702 # This appends '../' to your input for each '.' you type after an initial '..'
4703 #zdouble_dot_expand='true'
4704
4705 #
4706 # Syntax-Highlighting
4707 #
4708
4709 # This determines what highlighters will be used with the syntax-highlighting module.
4710 # Documentation of the highlighters can be found here:
4711 #   https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
4712 # For (u)rxvt, termite and gnome-terminal users,
4713 # removing the 'cursor' highlighter will fix the disappearing cursor problem
4714 #zhighlighters=(main brackets cursor)
4715 zhighlighters=(main brackets pattern)
4716
4717
4718 #
4719 # SSH
4720 #
4721
4722 # Load these ssh identities with the ssh module
4723 zssh_ids=(id_rsa plasma_id_rsa id_ed25519 id_rsa_aur)
4724
4725
4726 #
4727 # Pacman
4728 #
4729
4730 # Set (optional) pacman front-end.
4731 zpacman_frontend='yay'
4732
4733 # Load any helper scripts as defined here
4734 #zpacman_helper=(aur)
4735 #+end_src
4736
4737 *** zlogin
4738 :PROPERTIES:
4739 :header-args+: :tangle ~/.zlogin
4740 :END:
4741
4742 #+begin_src sh
4743
4744
4745 #
4746 # User configuration sourced by login shells
4747 #
4748
4749 # Initialize zim
4750 [[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
4751 #+end_src
4752
4753 *** zprofile
4754 :PROPERTIES:
4755 :header-args+: :tangle ~/.zprofile
4756 :END:
4757
4758 #+begin_src sh
4759 #PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
4760 #PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
4761 export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
4762 export XDG_CONFIG_HOME=$HOME/.config
4763 export XDG_DATA_HOME=$HOME/.local/share
4764 export XDG_DATA_DIRS=/usr/local/share:/usr/share
4765 export MAILDIR="$HOME/mail"
4766 export CVS_RSH=ssh
4767 #export MATHMODELS=$HOME/src/eiffel/mathmodels
4768 #export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
4769 #export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
4770
4771 # Eiffel2Java stuff
4772 #export JAVA_HOME=/usr/lib/jvm/default
4773 #export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
4774 #export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4775 #export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4776
4777 #export PATH="$HOME/usr/build/pvs:$PATH"
4778 #export SBCLISP_HOME=/usr/share/sbcl-source
4779 #export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
4780
4781 export MOZ_USE_XINPUT2=1  # precise scrolling in firefox
4782
4783 #export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
4784 #export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
4785
4786 if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
4787 #+end_src
4788
4789 *** zshenv
4790 :PROPERTIES:
4791 :header-args+: :tangle ~/.zshenv
4792 :END:
4793
4794 #+begin_src sh
4795 # Ensure that a non-login, non-interactive shell has a defined environment.
4796 if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
4797   source "${ZDOTDIR:-$HOME}/.zprofile"
4798 fi
4799 #+end_src
4800
4801 *** zshrc
4802 :PROPERTIES:
4803 :header-args+: :tangle ~/.zshrc
4804 :END:
4805
4806 #+begin_src sh
4807 # Bash-like navigation
4808 #export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
4809 #export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
4810 export WORDCHARS='*?[]~=&;!#$%^(){}<>'
4811 #ZLE_SPACE_SUFFIX_CHARS=$'|&'
4812
4813 #disable -r time       # disable shell reserved word
4814 #alias time='time -p'  # -p for POSIX output
4815
4816 # rehash if last command was pacaur or pacman
4817 # (so that zsh picks up changes in $PATH immediately)
4818 TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
4819
4820 #
4821 # User configuration sourced by interactive shells
4822 #
4823
4824 # Change default zim location
4825 export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
4826
4827 # Start zim
4828 [[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
4829
4830 ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
4831 #ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
4832
4833 setopt globdots
4834
4835 source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
4836 source ~/.zsh/zsh-autopair/autopair.zsh
4837
4838
4839 ### fzf ###
4840
4841 source /usr/share/fzf/key-bindings.zsh
4842 source /usr/share/fzf/completion.zsh
4843
4844 # Accept history selection instead of putting it on
4845 # the command line
4846 fzf-history-widget-accept() {
4847   fzf-history-widget
4848   zle accept-line
4849 }
4850 #zle     -N   fzf-history-widget-accept
4851 #bindkey '^R' fzf-history-widget-accept
4852
4853 # alt+c preview
4854 export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
4855
4856 ### fzf ###
4857
4858
4859 # aliases
4860 alias mpv="mpv --ytdl-format mp4"
4861 alias mv="mv -iv"
4862 alias cp="cp -iv"
4863 alias scl=systemctl
4864 alias jcl=journalctl
4865 alias m="mbsync -Va; getmail; notmuch new"
4866 alias best="youtube-dl -f best"
4867 alias nixx="ssh amin@nix.aminb.org"
4868 alias fence="ssh aminb@fencepost.gnu.org"
4869
4870 aur() {
4871    cd ~/usr/build
4872    git clone https://aur.archlinux.org/${1}.git
4873    cd ${1}
4874 }
4875
4876 # i-beam cursor
4877 echo -e "\033[5 q"
4878 #echo -e "\033[6 q"
4879 #+end_src
4880
4881 * Scripts
4882
4883 This section contains various useful scripts and the ones used by the
4884 programs above. For instance, =toggle-tablet= for switching to and
4885 from tablet mode on my X220T, =toggle-presentation-mode= for toggling
4886 Xfce's presentation mode which keeps the screen awake, and
4887 =rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
4888 exact brightness value.
4889
4890 ** battery-percentage-time
4891 :PROPERTIES:
4892 :header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/sh"
4893 :END:
4894
4895 #+begin_src sh
4896 dbus_send() {
4897         label=$1
4898         dbus-send --print-reply=literal --system \
4899                 --dest=org.freedesktop.UPower \
4900                 /org/freedesktop/UPower/devices/battery_BAT0 \
4901                 org.freedesktop.DBus.Properties.Get \
4902                 string:org.freedesktop.UPower.Device \
4903                 string:"${label}" | awk '{print $3}'
4904 }
4905
4906 perc=$(dbus_send 'Percentage')
4907 state=$(dbus_send 'State')
4908
4909 if [ "$state" -eq 2 ]; then  # Discharging
4910         secs=$(dbus_send 'TimeToEmpty')
4911 elif [ "$state" -eq 1 ]; then  # Charging
4912         secs=$(dbus_send 'TimeToFull')
4913 fi
4914
4915 printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60))
4916 #+end_src
4917
4918 ** rofi-light
4919 :PROPERTIES:
4920 :header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
4921 :END:
4922
4923 #+begin_src bash
4924 cur=$(light -G)
4925 val=$(rofi -dmenu -mesg "light    $cur" -p "light -S " -l 0 -width 12)
4926 light -S $val
4927 #+end_src
4928
4929 ** s (run sway)
4930 :PROPERTIES:
4931 :header-args+: :tangle ~/.local/bin/s :shebang "#!/bin/bash"
4932 :END:
4933
4934 #+begin_src bash
4935 export _JAVA_AWT_WM_NONREPARENTING=1
4936 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4937 light -Scrs "intel_backlight" 2
4938 source $HOME/.zprofile
4939 sway
4940 #+end_src
4941
4942 ** sway-ws-util
4943 :PROPERTIES:
4944 :header-args+: :tangle ~/.local/bin/sway-ws-util :shebang "#!/bin/bash"
4945 :END:
4946
4947 #+begin_src bash
4948 curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name')
4949 [[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1))
4950 [[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1))
4951 dest_ws=-1
4952 op=-1
4953
4954 if [ "$1" = "switch" ] || [ "$1" = "move" ]; then
4955   op="$1"
4956   if [ "$2" = "prev" ]; then
4957     dest_ws="$prev_ws"
4958   elif [ "$2" = "next" ]; then
4959     dest_ws="$next_ws"
4960   else
4961     echo "Usage: $0 $1 {prev|next} [follow]"
4962     exit 1
4963   fi
4964 else
4965   echo "Usage: $0 {switch|move} {prev|next} [follow]"
4966   exit 1
4967 fi
4968
4969 if [ "$op" = "switch" ]; then
4970   sway workspace "$dest_ws"
4971 elif [ "$op" = "move" ]; then
4972   sway move container to workspace "$dest_ws"
4973   if [ "$3" = "follow" ]; then
4974     sway workspace "$dest_ws"
4975   fi
4976 fi
4977 #+end_src
4978
4979 ** toggle-layout
4980 :PROPERTIES:
4981 :header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
4982 :END:
4983
4984 #+begin_src bash
4985 lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
4986
4987 if [ "$lang" = "us" ]; then
4988     setxkbmap ir
4989 else
4990     setxkbmap us
4991     # xmodmap $HOME/.Xmodmap
4992 fi
4993 #+end_src
4994
4995 ** toggle-presentation-mode
4996 :PROPERTIES:
4997 :header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
4998 :END:
4999
5000 #+begin_src bash
5001 xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
5002 #+end_src
5003
5004 ** toggle-tablet
5005 :PROPERTIES:
5006 :header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
5007 :END:
5008
5009 This script toggles between a 'normal' mode and a 'tablet' mode, doing
5010 a few things:
5011
5012 - rotates the screen using =xrandr=, so that rotating the physical
5013   display of my X220t would have the laptop's battery on the right
5014   hand side,
5015 - enables touch screen,
5016 - properly rotates the stylus pen and touch screen pointers, and
5017 - toggles between RGB and Vertical BGR sub-pixel order.
5018
5019 #+begin_src bash
5020 case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
5021     0)  # Screen is not rotated, we should rotate it right (90°)
5022            xrandr -o 3
5023            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
5024            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
5025            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
5026            xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
5027            ;;
5028     1)  # Currently top is rotated right, we should set it normal (0°)
5029           xrandr -o 0
5030           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
5031           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
5032           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
5033           xfconf-query -c xsettings -p /Xft/RGBA -s rgb
5034           ;;
5035     *)
5036            echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
5037            exit 1
5038            ;;
5039 esac
5040 #+end_src
5041
5042 ** unlock-def-gk.py
5043 :PROPERTIES:
5044 :header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
5045 :END:
5046
5047 #+begin_src python
5048 import gnomekeyring as gk
5049 # list_item_ids_sync('login')[0] == 1L
5050 gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
5051 #+end_src
5052
5053 ** volume-info
5054 :PROPERTIES:
5055 :header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh"
5056 :END:
5057
5058 #+begin_src sh
5059 cur_vol=$(pamixer --get-volume)
5060
5061 if [ $(pamixer --get-mute) = true ]; then
5062   printf 'mt \n' "$cur_vol"
5063 else
5064   printf '%02d \n' "$cur_vol"
5065 fi
5066 #+end_src
5067
5068 ** wp
5069
5070 My little wallpaper changer script.
5071
5072 *** wp
5073 :PROPERTIES:
5074 :header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
5075 :END:
5076
5077 #+begin_src bash :tangle no
5078 export DISPLAY=:0
5079
5080 case "$1" in
5081   "day")
5082     feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5083     ;;
5084   "night")
5085     feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5086     ;;
5087   *)
5088     echo $"Usage: $0 {day|night}"
5089     exit 1
5090 esac
5091 #+end_src
5092
5093 *** wp-auto
5094 :PROPERTIES:
5095 :header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
5096 :END:
5097
5098 #+begin_src bash :tangle no
5099 SED=$(which sed)
5100 ROFI=$(which rofi)
5101
5102 export DISPLAY=:0
5103 HOUR=$(date +%H)
5104
5105 if [ -z "${SED}" ]
5106 then
5107     echo "Did not find 'sed', script cannot continue."
5108     exit 1
5109 fi
5110 if [ -z "${ROFI}" ]
5111 then
5112     echo "Did not find rofi, there is no point to continue."
5113     exit 1
5114 fi
5115
5116 ###
5117 # Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
5118 # Repeated calls should leave the config clean-ish
5119 ###
5120 function set_theme()
5121 {
5122     CDIR="${HOME}/.config/rofi/"
5123     if [ ! -d "${CDIR}" ]
5124     then
5125         mkdir -p ${CDIR}
5126     fi
5127     if [ -f "${CDIR}/config" ]
5128     then
5129         ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
5130     fi
5131     echo "rofi.theme: ${1}" >> "${CDIR}/config"
5132
5133 }
5134
5135 if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
5136     then
5137         feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5138         xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
5139         set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
5140     else
5141         feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5142         xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
5143         set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
5144 fi
5145 #+end_src
5146
5147 *** wp.service
5148 :PROPERTIES:
5149 :header-args+: :tangle ~/.config/systemd/user/wp.service
5150 :END:
5151
5152 #+begin_src conf :tangle no
5153 [Unit]
5154 Description=wallpaper service
5155
5156 [Service]
5157 Type=oneshot
5158 ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
5159 #+end_src
5160
5161 *** wp.timer
5162 :PROPERTIES:
5163 :header-args+: :tangle ~/.config/systemd/user/wp.timer
5164 :END:
5165
5166 #+begin_src conf :tangle no
5167 [Unit]
5168 [Unit]
5169 Description=wallpaper timer
5170
5171 [Timer]
5172 OnCalendar=07,21:00
5173 Unit=wp.service
5174 Persistent=true
5175
5176 [Install]
5177 WantedBy=timers.target
5178 #+end_src
5179
5180 ** zathura-sync.sh
5181 :PROPERTIES:
5182 :header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
5183 :END:
5184
5185 #+begin_src sh
5186 pos="$1"
5187 pdffile="$2"
5188 zathura --synctex-forward "$pos" "$pdffile" || \
5189     (
5190     zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
5191     sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
5192 #+end_src
5193 ** Fun :)
5194
5195 *** eat-em
5196 :PROPERTIES:
5197 :header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
5198 :END:
5199
5200 #+begin_src sh
5201 # Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5202 # [ESC] character in original post removed here.
5203
5204 # ANSI Color -- use these variables to easily have different color
5205 #    and format output. Make sure to output the reset sequence after
5206 #    colors (f = foreground, b = background), and use the 'off'
5207 #    feature for anything you turn on.
5208
5209 initializeANSI()
5210 {
5211  esc="$(echo -en '\e')"
5212
5213   blackf="${esc}[30m";   redf="${esc}[31m";    greenf="${esc}[32m"
5214   yellowf="${esc}[33m"   bluef="${esc}[34m";   purplef="${esc}[35m"
5215   cyanf="${esc}[36m";    whitef="${esc}[37m"
5216
5217   blackb="${esc}[40m";   redb="${esc}[41m";    greenb="${esc}[42m"
5218   yellowb="${esc}[43m"   blueb="${esc}[44m";   purpleb="${esc}[45m"
5219   cyanb="${esc}[46m";    whiteb="${esc}[47m"
5220
5221   boldon="${esc}[1m";    boldoff="${esc}[22m"
5222   italicson="${esc}[3m"; italicsoff="${esc}[23m"
5223   ulon="${esc}[4m";      uloff="${esc}[24m"
5224   invon="${esc}[7m";     invoff="${esc}[27m"
5225
5226   reset="${esc}[0m"
5227 }
5228
5229 # note in this first use that switching colors doesn't require a reset
5230 # first - the new color overrides the old one.
5231
5232 #clear
5233
5234 initializeANSI
5235
5236 cat << EOF
5237
5238  ${yellowf}  ▄███████▄${reset}   ${redf}  ▄██████▄${reset}    ${greenf}  ▄██████▄${reset}    ${bluef}  ▄██████▄${reset}    ${purplef}  ▄██████▄${reset}    ${cyanf}  ▄██████▄${reset}
5239  ${yellowf}▄█████████▀▀${reset}  ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset}  ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset}  ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset}  ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset}  ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5240  ${yellowf}███████▀${reset}      ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset}  ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset}  ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset}  ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset}  ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5241  ${yellowf}███████▄${reset}      ${redf}████████████${reset}  ${greenf}████████████${reset}  ${bluef}████████████${reset}  ${purplef}████████████${reset}  ${cyanf}████████████${reset}
5242  ${yellowf}▀█████████▄▄${reset}  ${redf}██▀██▀▀██▀██${reset}  ${greenf}██▀██▀▀██▀██${reset}  ${bluef}██▀██▀▀██▀██${reset}  ${purplef}██▀██▀▀██▀██${reset}  ${cyanf}██▀██▀▀██▀██${reset}
5243  ${yellowf}  ▀███████▀${reset}   ${redf}▀   ▀  ▀   ▀${reset}  ${greenf}▀   ▀  ▀   ▀${reset}  ${bluef}▀   ▀  ▀   ▀${reset}  ${purplef}▀   ▀  ▀   ▀${reset}  ${cyanf}▀   ▀  ▀   ▀${reset}
5244
5245  ${boldon}${yellowf}  ▄███████▄   ${redf}  ▄██████▄    ${greenf}  ▄██████▄    ${bluef}  ▄██████▄    ${purplef}  ▄██████▄    ${cyanf}  ▄██████▄${reset}
5246  ${boldon}${yellowf}▄█████████▀▀  ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄  ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄  ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄  ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄  ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5247  ${boldon}${yellowf}███████▀      ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███  ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███  ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███  ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███  ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5248  ${boldon}${yellowf}███████▄      ${redf}████████████  ${greenf}████████████  ${bluef}████████████  ${purplef}████████████  ${cyanf}████████████${reset}
5249  ${boldon}${yellowf}▀█████████▄▄  ${redf}██▀██▀▀██▀██  ${greenf}██▀██▀▀██▀██  ${bluef}██▀██▀▀██▀██  ${purplef}██▀██▀▀██▀██  ${cyanf}██▀██▀▀██▀██${reset}
5250  ${boldon}${yellowf}  ▀███████▀   ${redf}▀   ▀  ▀   ▀  ${greenf}▀   ▀  ▀   ▀  ${bluef}▀   ▀  ▀   ▀  ${purplef}▀   ▀  ▀   ▀  ${cyanf}▀   ▀  ▀   ▀${reset}
5251
5252 EOF
5253 #+end_src
5254
5255 *** invade-em
5256 :PROPERTIES:
5257 :header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
5258 :END:
5259
5260 #+begin_src bash
5261 #
5262 # ANSI color scheme script featuring Space Invaders
5263 #
5264 # Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5265 # Modified by lolilolicon
5266 #
5267
5268 f=3 b=4
5269 for j in f b; do
5270   for i in {0..7}; do
5271     printf -v $j$i %b "\e[${!j}${i}m"
5272   done
5273 done
5274 bld=$'\e[1m'
5275 rst=$'\e[0m'
5276
5277 cat << EOF
5278
5279  $f1  ▀▄   ▄▀     $f2 ▄▄▄████▄▄▄    $f3  ▄██▄     $f4  ▀▄   ▄▀     $f5 ▄▄▄████▄▄▄    $f6  ▄██▄  $rst
5280  $f1 ▄█▀███▀█▄    $f2███▀▀██▀▀███   $f3▄█▀██▀█▄   $f4 ▄█▀███▀█▄    $f5███▀▀██▀▀███   $f6▄█▀██▀█▄$rst
5281  $f1█▀███████▀█   $f2▀▀███▀▀███▀▀   $f3▀█▀██▀█▀   $f4█▀███████▀█   $f5▀▀███▀▀███▀▀   $f6▀█▀██▀█▀$rst
5282  $f1▀ ▀▄▄ ▄▄▀ ▀   $f2 ▀█▄ ▀▀ ▄█▀    $f3▀▄    ▄▀   $f4▀ ▀▄▄ ▄▄▀ ▀   $f5 ▀█▄ ▀▀ ▄█▀    $f6▀▄    ▄▀$rst
5283
5284  $bld$f1▄ ▀▄   ▄▀ ▄   $f2 ▄▄▄████▄▄▄    $f3  ▄██▄     $f4▄ ▀▄   ▄▀ ▄   $f5 ▄▄▄████▄▄▄    $f6  ▄██▄  $rst
5285  $bld$f1█▄█▀███▀█▄█   $f2███▀▀██▀▀███   $f3▄█▀██▀█▄   $f4█▄█▀███▀█▄█   $f5███▀▀██▀▀███   $f6▄█▀██▀█▄$rst
5286  $bld$f1▀█████████▀   $f2▀▀▀██▀▀██▀▀▀   $f3▀▀█▀▀█▀▀   $f4▀█████████▀   $f5▀▀▀██▀▀██▀▀▀   $f6▀▀█▀▀█▀▀$rst
5287  $bld$f1 ▄▀     ▀▄    $f2▄▄▀▀ ▀▀ ▀▀▄▄   $f3▄▀▄▀▀▄▀▄   $f4 ▄▀     ▀▄    $f5▄▄▀▀ ▀▀ ▀▀▄▄   $f6▄▀▄▀▀▄▀▄$rst
5288
5289
5290                                      $f7▌$rst
5291
5292                                    $f7▌$rst
5293
5294                               $f7    ▄█▄    $rst
5295                               $f7▄█████████▄$rst
5296                               $f7▀▀▀▀▀▀▀▀▀▀▀$rst
5297
5298 EOF
5299 #+end_src