85769b23bbf6713402b3e63472f7cce939e89cc8
[~bandali/configs] / rc.org
1 #+title: rc.org
2 #+property: header-args :comments link :mkdirp yes :results silent
3
4 * About
5
6 This org file contains the configuration files of pretty much every
7 program I use. The files are tangled (i.e. exported, or derived) from
8 this file using =org-babel=.
9
10 Note: This file is best viewed inside Emacs with org mode.
11
12 * Configs
13
14 This section contains the configuration files (dotfiles) of various
15 programs I use.
16
17 ** bspwm
18
19 *** bspwmrc
20 :PROPERTIES:
21 :header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
22 :END:
23
24 #+begin_src sh :tangle no
25 sxhkd &
26 sh ~/.fehbg &
27 xfce4-panel -d &
28 compton &
29 sleep 0.5 && pasystray --notify=all &
30
31 bspc monitor -d I II III IV V VI VII VIII IX X
32 #bspc monitor eDP-1 -d I II III IV V
33 #bspc monitor HDMI-1 -d VI VII VIII IX X
34
35 #bspc config border_width 2
36 #bspc config window_gap 8
37 bspc config window_gap 0
38
39 bspc config bottom_padding 26
40
41 bspc config split_ratio 0.52
42 bspc config borderless_monocle true
43 bspc config gapless_monocle true
44 bspc config click_to_focus button1
45 bspc config directional_focus_tightness low
46
47 #bspc rule -a Firefox desktop='^1' follow=on
48 bspc rule -a Nightly desktop='^1' follow=on
49 bspc rule -a Emacs desktop='^2' state=tiled follow=on
50 #bspc rule -a Chromium desktop='^4' follow=on
51 bspc rule -a URxvt state=floating
52 bspc rule -a URxvt:tiled state=tiled
53 bspc rule -a Connman-gtk state=floating
54 bspc rule -a Xfce4-panel state=floating
55 bspc rule -a TelegramDesktop state=floating
56 bspc rule -a Ec state=floating
57 bspc rule -a Pavucontrol state=floating
58 bspc rule -a Eog state=floating
59 bspc rule -a Seahorse state=floating
60 bspc rule -a mpv state=floating
61 bspc rule -a Evince state=floating
62 bspc rule -a Meld state=floating
63 bspc rule -a Autokey-gtk state=floating
64 bspc rule -a Mousepad state=floating
65 bspc rule -a Wrapper-1.0 state=floating
66 bspc rule -a File-roller state=floating
67 bspc rule -a Gnome-disks state=floating
68 bspc rule -a Termite state=floating
69 bspc rule -a Termite:tiled state=tiled
70 bspc rule -a Thunderbird:Calendar state=floating
71 bspc rule -a Audacity state=floating
72 bspc rule -a Proof state=floating # pvs x-show-proof
73 bspc rule -a Nm-connection-editor state=floating
74 bspc rule -a Wire state=floating
75 bspc rule -a discord state=floating
76 bspc rule -a X2goclient state=floating
77 bspc rule -a SimpleScreenRecorder state=floating
78 bspc rule -a Gimp state=floating
79 bspc rule -a Wrapper-2.0 state=floating
80 bspc rule -a Zathura state=tiled
81 #+end_src
82
83 *** sxhkdrc
84 :PROPERTIES:
85 :header-args+: :tangle ~/.config/sxhkd/sxhkdrc
86 :END:
87
88 #+begin_src conf :tangle no
89 #
90 # wm independent hotkeys
91 #
92
93 # terminal emulator
94 super + {_,shift} + Return
95 urxvt{_, -name tiled}
96
97 #super + {_,shift} + Return
98 # termite{_, --name=tiled}
99
100 # program launcher
101 super + space
102 rofi -show run -display-run '> ' -display-window ' 🗔 '
103
104 super + alt + space
105 xfce4-popup-whiskermenu
106
107 # window finder
108 super + backslash
109 rofi -show window -display-run '> ' -display-window ' 🗔 '
110
111 # password manager
112 alt + space
113 rofi-pass
114
115 # firefox
116 #super + r
117 # firefox
118
119 # chromium
120 #super + c
121 # chromium -incognito
122
123 # emacs
124 super + e
125 emacs
126
127 # make sxhkd reload its configuration files:
128 super + Escape
129 pkill -USR1 -x sxhkd
130
131 # volume {up,down}
132 XF86Audio{Raise,Lower}Volume
133 pamixer --allow-boost --{in,de}crease 5
134
135 # mute
136 XF86AudioMute
137 pamixer --toggle-mute
138
139 XF86AudioMicMute
140 pactl set-source-mute 1 toggle
141
142 # playback control
143 XF86Audio{Play,Prev,Next}
144 mpc {toggle,prev,next}
145
146 # lock the screen
147 super + shift + q
148 light-locker-command -l
149
150 # Toggle keyboard layout
151 super + F7
152 toggle-layout
153
154 # Toggle Xfce presentation mode
155 XF86LaunchB
156 toggle-presentation-mode
157
158 # monitor brightness
159 XF86MonBrightness{Up,Down}
160 light -{A,U} 5
161
162 super + apostrophe
163 rofi-light
164
165 # keyboard brightness
166 #XF86KbdBrightness{Up,Down}
167 # kbdlight {up,down}
168
169 XF86RotateWindows
170 toggle-tablet
171
172 #
173 # bspwm hotkeys
174 #
175
176 # quit bspwm normally
177 super + alt + Escape
178 bspc quit
179
180 # close and kill
181 super + {w,q}
182 bspc node -{c,k}
183
184 # alternate between the tiled and monocle layout
185 super + m
186 bspc desktop -l next
187
188 # send the newest marked node to the newest preselected node
189 super + y
190 bspc node newest.marked.local -n newest.!automatic.local
191
192 # swap the current node and the biggest node
193 super + g
194 bspc node -s biggest
195
196 #
197 # state/flags
198 #
199
200 # set the window state
201 super + {t,shift + t,s,f}
202 bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
203
204 # set the node flags
205 super + ctrl + {m,x,y,z}
206 bspc node -g {marked,locked,sticky,private}
207
208 #
209 # focus/swap
210 #
211
212 # focus the node in the given direction
213 super + {_,shift + }{h,j,k,l}
214 bspc node -{f,s} {west,south,north,east}
215
216 # focus the node for the given path jump
217 super + {p,b,comma,period}
218 bspc node -f @{parent,brother,first,second}
219
220 # focus the next/previous node in the current desktop
221 super + {_,shift + }c
222 bspc node -f {next,prev}.local
223
224 # focus the next/previous desktop in the current monitor
225 super + bracket{left,right}
226 bspc desktop -f {prev,next}.local
227
228 # send to next/prev desktop
229 super + shift + bracket{left,right}
230 bspc node -d {prev,next} --follow
231
232 # focus the last node/desktop
233 super + {grave,Tab}
234 bspc {node,desktop} -f last
235
236 # focus the older or newer node in the focus history
237 super + {o,i}
238 bspc wm -h off; \
239 bspc node {older,newer} -f; \
240 bspc wm -h on
241
242 # focus or send to the given desktop
243 super + {_,shift + }{1-9,0}
244 bspc {desktop -f,node -d} '^{1-9,10}'
245
246 #
247 # preselect
248 #
249
250 # preselect the direction
251 super + ctrl + {h,j,k,l}
252 bspc node -p {west,south,north,east}
253
254 # preselect the ratio
255 super + ctrl + {1-9}
256 bspc node -o 0.{1-9}
257
258 # cancel the preselection for the focused node
259 super + ctrl + space
260 bspc node -p cancel
261
262 # cancel the preselection for the focused desktop
263 super + ctrl + shift + space
264 bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
265
266 #
267 # move/resize
268 #
269
270 # expand a window by moving one of its side outward
271 super + alt + {h,j,k,l}
272 bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
273
274 # contract a window by moving one of its side inward
275 super + alt + shift + {h,j,k,l}
276 bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
277
278 # move a floating window
279 super + {Left,Down,Up,Right}
280 bspc node -v {-20 0,0 20,0 -20,20 0}
281
282 #alt + bracket{left,right}
283 # xdotool key --clearmodifiers ctrl+Page_{Up,Down}
284 #+end_src
285
286 ** compton
287 :PROPERTIES:
288 :header-args+: :tangle ~/.config/compton.conf
289 :END:
290
291 #+begin_src conf :tangle no
292 # Shadow
293 shadow = false; # Enabled client-side shadows on windows.
294 no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows.
295 no-dnd-shadow = true; # Don't draw shadows on DND windows.
296 clear-shadow = true; # Zero the part of the shadow's mask behind the
297 # window. Fix some weirdness with ARGB windows.
298 shadow-radius = 5; # The blur radius for shadows. (default 12)
299 shadow-offset-x = -5; # The left offset for shadows. (default -15)
300 shadow-offset-y = -5; # The top offset for shadows. (default -15)
301 # shadow-opacity = 0.7; # The translucency for shadows. (default .75)
302 # shadow-red = 0.0; # Red color value of shadow. (0.0 - 1.0, defaults to 0)
303 # shadow-green = 0.0; # Green color value of shadow. (0.0 - 1.0, defaults to 0)
304 # shadow-blue = 0.0; # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
305 shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ]; # Exclude conditions for shadows.
306 # shadow-exclude = "n:e:Notification";
307 #shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
308 shadow-ignore-shaped = true; # Avoid drawing shadow on all shaped windows
309 # (see also: --detect-rounded-corners)
310
311 # Opacity
312 menu-opacity = 1.0; # The opacity for menus. (default 1.0)
313 #inactive-opacity = 0.9; # Default opacity of inactive windows. (0.0 - 1.0)
314 # active-opacity = 0.8; # Default opacity for active windows. (0.0 - 1.0)
315 frame-opacity = 1.0; # Opacity of window titlebars and borders. (0.1 - 1.0)
316 # inactive-opacity-override = true; # Let inactive opacity set by 'inactive-opacity' overrides
317 # value of _NET_WM_OPACITY. Bad choice.
318 alpha-step = 0.06; # XRender backend: Step size for alpha pictures. Increasing
319 # it may result in less X resource usage,
320 # Yet fading may look bad.
321 #inactive-dim = 0.5; # Dim inactive windows. (0.0 - 1.0)
322 #inactive-dim-fixed = true; # Do not let dimness adjust based on window opacity.
323 # blur-background = true; # Blur background of transparent windows.
324 # Bad performance with X Render backend.
325 # GLX backend is preferred.
326 # blur-background-frame = true; # Blur background of opaque windows with transparent
327 # frames as well.
328 blur-background-fixed = true; # Do not let blur radius adjust based on window opacity.
329 blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
330 # Exclude conditions for background blur.
331
332 # Fading
333 fading = false; # Fade windows during opacity changes.
334 fade-delta = 3; # The time between steps in a fade in milliseconds. (default 10).
335 fade-in-step = 0.03; # Opacity change between steps while fading in. (default 0.028).
336 fade-out-step = 0.03; # Opacity change between steps while fading out. (default 0.03).
337 # no-fading-openclose = true; # Avoid fade windows in/out when opening/closing.
338 fade-exclude = [ ]; # Exclude conditions for fading.
339
340 # Other
341 backend = "glx" # Backend to use: "xrender" or "glx". GLX backend is typically
342 # much faster but depends on a sane driver.
343 mark-wmwin-focused = true; # Try to detect WM windows and mark them as active.
344 mark-ovredir-focused = true; # Mark all non-WM but override-redirect windows active (e.g. menus).
345 use-ewmh-active-win = true; # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
346 # instead of using FocusIn/Out events. Usually more reliable but
347 # depends on a EWMH-compliant WM.
348 detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
349 detect-client-opacity = true; # Detect _NET_WM_OPACITY on client windows, useful for window
350 # managers not passing _NET_WM_OPACITY of client windows to frame
351 # windows.
352 refresh-rate = 0; # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
353 vsync = "drm"; # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
354 # See man page for more details.
355 dbe = false; # Enable DBE painting mode. Rarely needed.
356 paint-on-overlay = true; # Painting on X Composite overlay window. Recommended.
357 sw-opti = false; # Limit compton to repaint at most once every 1 / refresh_rate.
358 # Incompatible with certain VSync methods.
359 unredir-if-possible = false; # Unredirect all windows if a full-screen opaque window is
360 # detected, to maximize performance for full-screen windows.
361 focus-exclude = [ ]; # A list of conditions of windows that should always be considered
362 # focused.
363 detect-transient = true; # Use WM_TRANSIENT_FOR to group windows, and consider windows in
364 # the same group focused at the same time.
365 detect-client-leader = true; # Use WM_CLIENT_LEADER to group windows.
366 invert-color-include = [ ]; # Conditions for windows to be painted with inverted color.
367
368 # GLX backend # GLX backend fine-tune options. See man page for more info.
369 glx-no-stencil = true; # Recommended.
370 glx-copy-from-front = false; # Useful with --glx-swap-method,
371 # glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
372 # glx-no-rebind-pixmap = true; # Recommended if it works.
373 glx-no-rebind-pixmap = true; # Recommended if it works.
374 #glx-swap-method = "4"; # See man page.
375 glx-swap-method = "4"; # See man page.
376
377 # Window type settings
378 wintypes:
379 {
380 tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
381 menu = { shadow = false; };
382 dropdown_menu = { shadow = false; };
383 popup_menu = { shadow = false; };
384 utility = { shadow = false; };
385 # fade: Fade the particular type of windows.
386 # shadow: Give those windows shadow
387 # opacity: Default opacity for the type of windows.
388 # focus: Whether to always consider windows of this type focused.
389 };
390 #+end_src
391
392 ** Dunst
393 :PROPERTIES:
394 :header-args+: :tangle ~/.config/dunst/dunstrc
395 :END:
396
397 #+begin_src conf
398 [global]
399 #font = Ubuntu Mono 10.5
400 font = Inconsolata 11
401
402 # Path to default icons.
403 icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
404
405 icon_position = left
406 # <b>bold</b>
407 # <i>italic</i>
408 # <s>strikethrough<s/>
409 # <u>underline</u>
410 markup = full
411 # The format of the message. Possible variables are:
412 # %a appname
413 # %s summary
414 # %b body
415 # %i iconname (including its path)
416 # %I iconname (without its path)
417 # %p progress value if set ([ 0%] to [100%]) or nothing
418 # Markup is allowed
419 format = "<b>%s</b>\n%b"
420 # Sort messages by urgency
421 sort = yes
422 # Show how many messages are currently hidden (because of geometry)
423 indicate_hiddenl= no
424 # Alignment of message text.
425 # Possible values are "left", "center" and "right"
426 alignment = center
427 # The frequency with wich text that is longer than the notification
428 # window allows bounces back and forth.
429 # This option conflicts with 'word_wrap'.
430 # Set to 0 to disable
431 bounce_freq = 3
432 # show age of message if message is older than show_age_threshold seconds.
433 # set to -1 to disable
434 show_age_threshold = -1
435 # split notifications into multiple lines if they don't fit into geometry
436 word_wrap = yes
437 # ignore newlines '\n' in notifications
438 ignore_newline = no
439 # The geometry of the message window.
440 # geometry [{width}]x{height}][+/-{x}+/-{y}]
441 # The height is measured in number of notifications everything else in pixels. If the width
442 # is omitted but the height is given ("-geometry x2"), the message window
443 # expands over the whole screen (dmenu-like). If width is 0,
444 # the window expands to the longest message displayed.
445 # A positive x is measured from the left, a negative from the
446 # right side of the screen. Y is measured from the top and down respectevly.
447 # The width can be negative. In this case the actual width is the
448 # screen width minus the width defined in within the geometry option.
449 #geometry = "410x12-12+12"
450 #geometry = "0x0-30-30"
451 geometry = "260x12-30-30"
452 # The transparency of the window. range: [0; 100]
453 # This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
454 transparency = 0
455 # Don't remove messages, if the user is idle (no mouse or keyboard input)
456 # for longer than idle_threshold seconds.
457 # Set to 0 to disable.
458 idle_threshold = 120
459 # Which monitor should the notifications be displayed on.
460 monitor = 0
461 # Display notification on focused monitor. Possible modes are:
462 # mouse: follow mouse pointer
463 # keyboard: follow window with keyboard focus
464 # none: don't follow anything
465 #
466 # "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
467 # This should be the case for almost all modern windowmanagers.
468 #
469 # If this option is set to mouse or keyboard, the monitor option will be
470 # ignored.
471 follow = keyboard
472 # should a notification popped up from history be sticky or
473 # timeout as if it would normally do.
474 sticky_history = yes
475 # The height of a single line. If the height is smaller than the font height,
476 # it will get raised to the font height.
477 # This adds empty space above and under the text.
478 line_height = 0
479
480 show_indicators = yes
481
482 # Draw a line of 'separatpr_height' pixel height between two notifications.
483 # Set to 0 to disable
484 separator_height = 3
485 # padding between text and separator
486 padding = 8
487 # horizontal padding
488 horizontal_padding = 8
489 # Define a color for the separator.
490 # possible values are:
491 # * auto: dunst tries to find a color fitting to the background
492 # * foreground: use the same color as the foreground
493 # * frame: use the same color as the frame.
494 # * anything else will be interpreted as a X color
495 separator_color = foreground
496 # print a notification on startup
497 # This is mainly for error detection, since dbus (re-)starts dunst
498 # automatically after a crash.
499 startup_notification = false
500 # dmenu path
501 #dmenu = /usr/bin/dmenu -p dunst:
502 dmenu = /usr/bin/rofi -dmenu -p dunst:
503 # browser for opening urls in context menu
504 browser = /usr/bin/firefox -new-tab
505 [frame]
506 width = 0
507 color = "#377222"
508 [shortcuts]
509 # shortcuts are specified as [modifier+][modifier+]...key
510 # available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
511 # and 'mod4' (windows-key)
512 # xev might be helpful to find names for keys
513 # close notification
514 close = ctrl+space
515 # close all notifications
516 close_all = ctrl+shift+space
517 # redisplay last message(s)
518 # On the US keyboard layout 'grave' is normally above TAB and left of '1'.
519 history = ctrl+shift+h
520 # context menu
521 context = ctrl+shift+period
522 [urgency_low]
523 # IMPORTANT: colors have to be defined in quotation marks.
524 # Otherwise the '#' and following would be interpreted as a comment.
525 background = "#1d2a30"
526 foreground = "#71c2af"
527 timeout = 3
528 [urgency_normal]
529 background = "#1d2a30"
530 foreground = "#71c2af"
531 timeout = 0
532 [urgency_critical]
533 background = "#1d2a30"
534 foreground = "#ff9982"
535 timeout = 0
536
537 # Every section that isn't one of the above is interpreted as a rules
538 # to override settings for certain messages.
539 # Messages can be matched by 'appname', 'summary', 'body' or 'icon'
540 # and you can override the 'timeout', 'urgency', 'foreground', 'background'
541 # and 'format'.
542 # Shell-like globbing will get expanded.
543 #
544 # SCRIPTING
545 # you can specify a script that gets run when the rule matches by setting
546 # the 'script' option.
547 # The script will be called as follows:
548 # script appname summary body icon urgency
549 # where urgency can be "LOW", "NORMAL" or "CRITICAL".
550 #
551 # NOTE: if you don't want a notification to be displayed, set the format to ""
552 # NOTE: It might be helpful to run dunst -print in a terminal in order to find
553 # fitting options for rules.
554 #[espeak]
555 # summary = "*"
556 # script = dunst_espeak.sh
557 #[script-test]
558 # summary = "*script*"
559 # script = dunst_test.sh
560 #[ignore]
561 ## This notification will not be displayed
562 # summary = "foobar"
563 # format = ""
564 #[signed_on]
565 # appname = Pidgin
566 # summary = "*signed on*"
567 # urgency = low
568 #
569 #[signed_off]
570 # appname = Pidgin
571 # summary = *signed off*
572 # urgency = low
573 #
574 #[says]
575 # appname = Pidgin
576 # summary = *says*
577 # urgency = critical
578 #
579 #[twitter]
580 # appname = Pidgin
581 # summary = *twitter.com*
582 # urgency = normal
583 #
584 [xfpm-backlight]
585 summary = *Brightness*
586 urgency = low
587 #+end_src
588
589 ** Fontconfig
590 :PROPERTIES:
591 :header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
592 :END:
593
594 #+begin_src xml
595 <?xml version="1.0"?>
596 <!DOCTYPE fontconfig SYSTEM "fonts.dtd">
597 <fontconfig>
598 <match target="font">
599 <edit mode="assign" name="rgba">
600 <const>rgb</const>
601 </edit>
602 </match>
603 <match target="font">
604 <edit mode="assign" name="hinting">
605 <bool>true</bool>
606 </edit>
607 </match>
608 <match target="font">
609 <edit mode="assign" name="hintstyle">
610 <const>hintslight</const>
611 </edit>
612 </match>
613 <match target="font">
614 <edit mode="assign" name="antialias">
615 <bool>true</bool>
616 </edit>
617 </match>
618 <match target="font">
619 <edit mode="assign" name="lcdfilter">
620 <const>lcddefault</const>
621 </edit>
622 </match>
623 <dir>~/.fonts</dir>
624
625 <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
626 <alias binding="same">
627 <family>Helvetica</family>
628 <accept>
629 <family>Liberation Sans</family>
630 </accept>
631 </alias>
632 </fontconfig>
633 #+end_src
634
635 ** Git
636
637 *** gitconfig
638 :PROPERTIES:
639 :header-args+: :tangle ~/.gitconfig
640 :END:
641
642 **** user
643 #+begin_src conf
644 [user]
645 name = Amin Bandali
646 email = amin@aminb.org
647 signingkey = 4E05246AB0BF7FFB
648 #+end_src
649
650 **** signing
651 #+begin_src conf
652 [commit]
653 gpgsign = true
654 # [format]
655 # signoff = true
656 #+end_src
657
658 **** core
659 #+begin_src conf
660 [core]
661 autocrlf = input # CRLF -> LF on commit
662 editor = emacsclient -t
663 excludesfile = ~/.gitignore_global
664 pager = "less"
665 #+end_src
666
667 **** gpg
668 #+begin_src conf
669 [gpg]
670 program = gpg2
671 #+end_src
672
673 **** alias
674 #+begin_src conf
675 [alias]
676 git = !exec git # handle nested git calls, e.g. git git status
677 aliases = config --get-regexp '^alias\\.'
678 a = add
679 s = status
680 sl = status --long
681 c = checkout
682 cb = checkout -b
683 b = branch
684 r = rebase
685 p = pull
686 pr = pull --rebase
687 ps = push
688 psf = push --force
689 #+end_src
690
691 **** color
692 #+begin_src conf
693 [color]
694 ui = auto
695 [color "status"]
696 added = green bold
697 changed = red bold
698 untracked = red bold
699 [color "branch"]
700 current = green bold
701 remote = magenta bold
702 [color "diff"]
703 new = green bold
704 old = red bold
705 #+end_src
706
707 **** status
708 #+begin_src conf
709 [status]
710 # showUntrackedFiles = all
711 short=true
712 branch=true
713 #+end_src
714
715 **** github
716 #+begin_src conf
717 [github]
718 user = aminb
719 #+end_src
720
721 **** send-email
722 #+begin_src conf
723 [sendemail]
724 smtpuser = amin@aminb.org
725 smtpserver = nix.aminb.org
726 smtpserverport = 587
727 smtpencryption = tls
728 annotate = yes
729 #+end_src
730
731 *** gitignore
732 :PROPERTIES:
733 :header-args+: :tangle ~/.gitignore_global
734 :END:
735
736 #+begin_src conf
737 *.orig
738 *.py[co]
739 *.sublime-workspace
740 *~
741 .DS_Store
742 *.elc
743 *-autoloads.el
744 #+end_src
745
746 ** [[https://github.com/Leinnan/i3gs][i3gs]]
747 :PROPERTIES:
748 :header-args+: :tangle ~/.config/i3gs/config
749 :END:
750
751 #+begin_src conf :comments none
752 borders_width=0 0 2 0
753 separator_width=10
754
755 [mpd]
756 preset=MPD
757 title=<span weight='heavy' fgcolor='#7FDBFF'> </span>
758 borders_color=#7FDBFF
759
760 [ram]
761 preset=RAM
762 title=<span weight='heavy' fgcolor='#3D9970'> </span>
763 borders_color=#3D9970
764
765 [cpu]
766 preset=CPU
767 title=<span weight='heavy' fgcolor='#2ECC40'> </span>
768 borders_color=#2ECC40
769
770 [hdd]
771 preset=HDD
772 title=<span weight='heavy' fgcolor='#01FF70'> </span>
773 borders_color=#01FF70
774
775 [battery]
776 preset=BAT
777 title=<span weight='heavy' fgcolor='#39CCCC'> </span>
778 borders_color=#39CCCC
779
780 [wifi]
781 preset=WIFI
782 title=<span weight='heavy' fgcolor='#01FF70'> </span>
783 borders_color=#01FF70
784
785 [date]
786 preset=DATE
787 command=date '+%I:%M, %a %b %d'
788 title=<span weight='heavy' fgcolor='#FFDC00'> </span>
789 borders_color=#FFDC00
790 separator_width=0
791 #+end_src
792 ** Latexmk
793 :PROPERTIES:
794 :header-args+: :tangle ~/.latexmkrc
795 :END:
796
797 #+begin_src conf
798 $pdf_previewer = "start zathura %O %S";
799 $clean_ext = "aux out";
800
801 # $pdf_update_method = 4;
802 # $pdf_update_command = "zathura %O %S";
803
804 # Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
805 # by Ctrl+click in the PDF.
806 # Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
807 # editor.
808 # $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
809 #+end_src
810
811 ** libinput
812
813 Improve XPS 15 9560's touchpad experience.
814
815 # begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
816 #+begin_src conf :tangle no
817 Section "InputClass"
818 Identifier "libinput touchpad catchall"
819 Driver "libinput"
820 MatchIsTouchpad "on"
821 Option "ClickMethod" "clickfinger"
822 Option "NaturalScrolling" "true"
823 Option "Tapping" "on"
824 Option "TappingButtonMap" "lrm"
825 EndSection
826 #+end_src
827
828 ** getmail
829
830 *** getmailrc
831 :PROPERTIES:
832 :header-args+: :tangle ~/.getmail/getmailrc
833 :END:
834
835 #+begin_src conf
836 [retriever]
837 type = SimplePOP3SSLRetriever
838 server = fencepost.gnu.org
839 username = aminb
840 password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
841 port = 995
842 use_apop = True
843
844 [destination]
845 type = Maildir
846 path = ~/mail/gnu/Inbox/
847
848 [options]
849 delete = True
850 #+end_src
851
852 *** getmail.service
853 :PROPERTIES:
854 :header-args+: :tangle ~/.config/systemd/user/getmail.service
855 :END:
856
857 #+begin_src conf :tangle no
858 [Unit]
859 Description=getmail service
860
861 [Service]
862 Type=oneshot
863 ExecStart=/usr/bin/getmail
864 StandardOutput=syslog
865 StandardError=syslog
866 #+end_src
867
868 *** getmail.timer
869 :PROPERTIES:
870 :header-args+: :tangle ~/.config/systemd/user/getmail.timer
871 :END:
872
873 #+begin_src conf :tangle no
874 [Unit]
875 Description=getmail timer
876
877 [Timer]
878 OnCalendar=*:0/30
879 Persistent=true
880 Unit=getmail.service
881
882 [Install]
883 WantedBy=timers.target
884 #+end_src
885
886 ** GnuPG
887 :PROPERTIES:
888 :header-args+: :tangle ~/.gnupg/gpg-agent.conf
889 :END:
890
891 #+begin_src conf
892 default-cache-ttl 43200
893 max-cache-ttl 43200
894
895 default-cache-ttl-ssh 10800
896 max-cache-ttl-ssh 10800
897
898 # pinentry-program /usr/bin/pinentry-qt
899 #+end_src
900
901 ** GTK
902
903 *** gtk-2.0
904 :PROPERTIES:
905 :header-args+: :tangle ~/.gtkrc-2.0
906 :END:
907
908 #+begin_src conf
909 gtk-theme-name="Greybird"
910 gtk-icon-theme-name="Paper"
911 gtk-font-name="Ubuntu 10"
912 gtk-menu-images=0
913 # gtk-key-theme-name = "Emacs"
914 #+end_src
915
916 *** gtk-3.0
917 :PROPERTIES:
918 :header-args+: :tangle ~/.config/gtk-3.0/settings.ini
919 :END:
920
921 #+begin_src conf :tangle no
922 [Settings]
923 gtk-icon-theme-name = Paper
924 # gtk-theme-name = Adwaita
925
926 gtk-theme-name = Greybird
927 # gtk-theme-name = Arc-Darker
928 # gtk-theme-name = Numix-ArchBlue
929
930 gtk-font-name = Ubuntu 10
931 # gtk-key-theme-name = Emacs
932 #+end_src
933
934 ** isync
935
936 *** mbsyncrc
937 :PROPERTIES:
938 :header-args+: :tangle ~/.mbsyncrc
939 :END:
940
941 #+begin_src conf
942 # Global defaults
943 CopyArrivalDate yes
944
945 ######
946 IMAPAccount amin
947 Host nix.aminb.org
948 User amin@aminb.org
949 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
950 SSLType IMAPS
951
952 IMAPStore amin-remote
953 Account amin
954
955 MaildirStore amin-local
956 Path ~/mail/amin/
957 Inbox ~/mail/amin/Inbox
958 SubFolders Verbatim
959
960 Channel amin
961 Master :amin-remote:
962 Slave :amin-local:
963 Patterns * !dovecot*
964 Create Both
965 SyncState *
966
967 ######
968 IMAPAccount uwaterloo
969 Host connect.uwaterloo.ca
970 User abandali
971 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
972 SSLType IMAPS
973
974 IMAPStore uwaterloo-remote
975 Account uwaterloo
976
977 MaildirStore uwaterloo-local
978 Path ~/mail/uwaterloo/
979 Inbox ~/mail/uwaterloo/Inbox
980 SubFolders Verbatim
981
982 Channel uwaterloo
983 Master :uwaterloo-remote:
984 Slave :uwaterloo-local:
985 Patterns * !dovecot*
986 Create Both
987 SyncState *
988 #+end_src
989
990 *** mbsync.service
991 :PROPERTIES:
992 :header-args+: :tangle ~/.config/systemd/user/mbsync.service
993 :END:
994
995 #+begin_src conf :tangle no
996 [Unit]
997 Description=mbsync service
998
999 [Service]
1000 Type=oneshot
1001 ExecStart=/usr/bin/mbsync -Va
1002 StandardOutput=syslog
1003 StandardError=syslog
1004 #+end_src
1005
1006 *** mbsync.timer
1007 :PROPERTIES:
1008 :header-args+: :tangle ~/.config/systemd/user/mbsync.timer
1009 :END:
1010
1011 #+begin_src conf :tangle no
1012 [Unit]
1013 Description=mbsync timer
1014
1015 [Timer]
1016 OnCalendar=*:0/15
1017 Persistent=true
1018 Unit=mbsync.service
1019
1020 [Install]
1021 WantedBy=timers.target
1022 #+end_src
1023
1024 ** mpd
1025 :PROPERTIES:
1026 :header-args+: :tangle ~/.config/mpd/mpd.conf
1027 :END:
1028
1029 #+begin_src conf
1030 # An example configuration file for MPD.
1031 # Read the user manual for documentation: http://www.musicpd.org/doc/user/
1032
1033
1034 # Files and directories #######################################################
1035 #
1036 # This setting controls the top directory which MPD will search to discover the
1037 # available audio files and add them to the daemon's online database. This
1038 # setting defaults to the XDG directory, otherwise the music directory will be
1039 # be disabled and audio files will only be accepted over ipc socket (using
1040 # file:// protocol) or streaming files over an accepted protocol.
1041 #
1042 music_directory "~/usr/music"
1043 #
1044 # This setting sets the MPD internal playlist directory. The purpose of this
1045 # directory is storage for playlists created by MPD. The server will use
1046 # playlist files not created by the server but only if they are in the MPD
1047 # format. This setting defaults to playlist saving being disabled.
1048 #
1049 playlist_directory "~/.mpd/playlists"
1050 #
1051 # This setting sets the location of the MPD database. This file is used to
1052 # load the database at server start up and store the database while the
1053 # server is not up. This setting defaults to disabled which will allow
1054 # MPD to accept files over ipc socket (using file:// protocol) or streaming
1055 # files over an accepted protocol.
1056 #
1057 db_file "~/.mpd/database"
1058 #
1059 # These settings are the locations for the daemon log files for the daemon.
1060 # These logs are great for troubleshooting, depending on your log_level
1061 # settings.
1062 #
1063 # The special value "syslog" makes MPD use the local syslog daemon. This
1064 # setting defaults to logging to syslog, otherwise logging is disabled.
1065 #
1066 log_file "~/.mpd/log"
1067 #
1068 # This setting sets the location of the file which stores the process ID
1069 # for use of mpd --kill and some init scripts. This setting is disabled by
1070 # default and the pid file will not be stored.
1071 #
1072 pid_file "~/.mpd/pid"
1073 #
1074 # This setting sets the location of the file which contains information about
1075 # most variables to get MPD back into the same general shape it was in before
1076 # it was brought down. This setting is disabled by default and the server
1077 # state will be reset on server start up.
1078 #
1079 state_file "~/.mpd/state"
1080 #
1081 # The location of the sticker database. This is a database which
1082 # manages dynamic information attached to songs.
1083 #
1084 sticker_file "~/.mpd/sticker.sql"
1085 #
1086 ###############################################################################
1087
1088
1089 # General music daemon options ################################################
1090 #
1091 # This setting specifies the user that MPD will run as. MPD should never run as
1092 # root and you may use this setting to make MPD change its user ID after
1093 # initialization. This setting is disabled by default and MPD is run as the
1094 # current user.
1095 #
1096 #user "nobody"
1097 #
1098 # This setting specifies the group that MPD will run as. If not specified
1099 # primary group of user specified with "user" setting will be used (if set).
1100 # This is useful if MPD needs to be a member of group such as "audio" to
1101 # have permission to use sound card.
1102 #
1103 #group "nogroup"
1104 #
1105 # This setting sets the address for the daemon to listen on. Careful attention
1106 # should be paid if this is assigned to anything other then the default, any.
1107 # This setting can deny access to control of the daemon. Not effective if
1108 # systemd socket activiation is in use.
1109 #
1110 # For network
1111 #bind_to_address "any"
1112 #
1113 # And for Unix Socket
1114 #bind_to_address "~/.mpd/socket"
1115 #
1116 # This setting is the TCP port that is desired for the daemon to get assigned
1117 # to.
1118 #
1119 #port "6600"
1120 #
1121 # This setting controls the type of information which is logged. Available
1122 # setting arguments are "default", "secure" or "verbose". The "verbose" setting
1123 # argument is recommended for troubleshooting, though can quickly stretch
1124 # available resources on limited hardware storage.
1125 #
1126 #log_level "default"
1127 #
1128 # If you have a problem with your MP3s ending abruptly it is recommended that
1129 # you set this argument to "no" to attempt to fix the problem. If this solves
1130 # the problem, it is highly recommended to fix the MP3 files with vbrfix
1131 # (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
1132 # point gapless MP3 playback can be enabled.
1133 #
1134 #gapless_mp3_playback "yes"
1135 #
1136 # Setting "restore_paused" to "yes" puts MPD into pause mode instead
1137 # of starting playback after startup.
1138 #
1139 #restore_paused "no"
1140 #
1141 # This setting enables MPD to create playlists in a format usable by other
1142 # music players.
1143 #
1144 #save_absolute_paths_in_playlists "no"
1145 #
1146 # This setting defines a list of tag types that will be extracted during the
1147 # audio file discovery process. The complete list of possible values can be
1148 # found in the user manual.
1149 #metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
1150 #
1151 # This setting enables automatic update of MPD's database when files in
1152 # music_directory are changed.
1153 #
1154 #auto_update "yes"
1155 #
1156 # Limit the depth of the directories being watched, 0 means only watch
1157 # the music directory itself. There is no limit by default.
1158 #
1159 #auto_update_depth "3"
1160 #
1161 ###############################################################################
1162
1163
1164 # Symbolic link behavior ######################################################
1165 #
1166 # If this setting is set to "yes", MPD will discover audio files by following
1167 # symbolic links outside of the configured music_directory.
1168 #
1169 #follow_outside_symlinks "yes"
1170 #
1171 # If this setting is set to "yes", MPD will discover audio files by following
1172 # symbolic links inside of the configured music_directory.
1173 #
1174 #follow_inside_symlinks "yes"
1175 #
1176 ###############################################################################
1177
1178
1179 # Zeroconf / Avahi Service Discovery ##########################################
1180 #
1181 # If this setting is set to "yes", service information will be published with
1182 # Zeroconf / Avahi.
1183 #
1184 #zeroconf_enabled "yes"
1185 #
1186 # The argument to this setting will be the Zeroconf / Avahi unique name for
1187 # this MPD server on the network.
1188 #
1189 #zeroconf_name "Music Player"
1190 #
1191 ###############################################################################
1192
1193
1194 # Permissions #################################################################
1195 #
1196 # If this setting is set, MPD will require password authorization. The password
1197 # setting can be specified multiple times for different password profiles.
1198 #
1199 #password "password@read,add,control,admin"
1200 #
1201 # This setting specifies the permissions a user has who has not yet logged in.
1202 #
1203 #default_permissions "read,add,control,admin"
1204 #
1205 ###############################################################################
1206
1207
1208 # Database #######################################################################
1209 #
1210
1211 #database {
1212 # plugin "proxy"
1213 # host "other.mpd.host"
1214 # port "6600"
1215 #}
1216
1217 # Input #######################################################################
1218 #
1219
1220 input {
1221 plugin "curl"
1222 # proxy "proxy.isp.com:8080"
1223 # proxy_user "user"
1224 # proxy_password "password"
1225 }
1226
1227 #
1228 ###############################################################################
1229
1230 # Audio Output ################################################################
1231 #
1232
1233 audio_output {
1234 type "pulse"
1235 name "pulse audio"
1236 }
1237
1238 audio_output {
1239 type "fifo"
1240 name "my_fifo"
1241 path "/tmp/mpd.fifo"
1242 format "44100:16:2"
1243 }
1244
1245 # MPD supports various audio output types, as well as playing through multiple
1246 # audio outputs at the same time, through multiple audio_output settings
1247 # blocks. Setting this block is optional, though the server will only attempt
1248 # autodetection for one sound card.
1249 #
1250 # An example of an ALSA output:
1251 #
1252 #audio_output {
1253 # type "alsa"
1254 # name "My ALSA Device"
1255 ## device "hw:0,0" # optional
1256 ## mixer_type "hardware" # optional
1257 ## mixer_device "default" # optional
1258 ## mixer_control "PCM" # optional
1259 ## mixer_index "0" # optional
1260 #}
1261 #
1262 # An example of an OSS output:
1263 #
1264 #audio_output {
1265 # type "oss"
1266 # name "My OSS Device"
1267 ## device "/dev/dsp" # optional
1268 ## mixer_type "hardware" # optional
1269 ## mixer_device "/dev/mixer" # optional
1270 ## mixer_control "PCM" # optional
1271 #}
1272 #
1273 # An example of a shout output (for streaming to Icecast):
1274 #
1275 #audio_output {
1276 # type "shout"
1277 # encoder "vorbis" # optional
1278 # name "My Shout Stream"
1279 # host "localhost"
1280 # port "8000"
1281 # mount "/mpd.ogg"
1282 # password "hackme"
1283 # quality "5.0"
1284 # bitrate "128"
1285 # format "44100:16:1"
1286 ## protocol "icecast2" # optional
1287 ## user "source" # optional
1288 ## description "My Stream Description" # optional
1289 ## url "http://example.com" # optional
1290 ## genre "jazz" # optional
1291 ## public "no" # optional
1292 ## timeout "2" # optional
1293 ## mixer_type "software" # optional
1294 #}
1295 #
1296 # An example of a recorder output:
1297 #
1298 #audio_output {
1299 # type "recorder"
1300 # name "My recorder"
1301 # encoder "vorbis" # optional, vorbis or lame
1302 # path "/var/lib/mpd/recorder/mpd.ogg"
1303 ## quality "5.0" # do not define if bitrate is defined
1304 # bitrate "128" # do not define if quality is defined
1305 # format "44100:16:1"
1306 #}
1307 #
1308 # An example of a httpd output (built-in HTTP streaming server):
1309 #
1310 #audio_output {
1311 # type "httpd"
1312 # name "My HTTP Stream"
1313 # encoder "vorbis" # optional, vorbis or lame
1314 # port "8000"
1315 # bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
1316 ## quality "5.0" # do not define if bitrate is defined
1317 # bitrate "128" # do not define if quality is defined
1318 # format "44100:16:1"
1319 # max_clients "0" # optional 0=no limit
1320 #}
1321 #
1322 # An example of a pulseaudio output (streaming to a remote pulseaudio server)
1323 #
1324 #audio_output {
1325 # type "pulse"
1326 # name "My Pulse Output"
1327 ## server "remote_server" # optional
1328 ## sink "remote_server_sink" # optional
1329 #}
1330 #
1331 # An example of a winmm output (Windows multimedia API).
1332 #
1333 #audio_output {
1334 # type "winmm"
1335 # name "My WinMM output"
1336 ## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1337 # or
1338 ## device "0" # optional
1339 ## mixer_type "hardware" # optional
1340 #}
1341 #
1342 # An example of an openal output.
1343 #
1344 #audio_output {
1345 # type "openal"
1346 # name "My OpenAL output"
1347 ## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1348 #}
1349 #
1350 # An example of an sndio output.
1351 #
1352 #audio_output {
1353 # type "sndio"
1354 # name "sndio output"
1355 # mixer_type "software"
1356 #}
1357 #
1358 # An example of an OS X output:
1359 #
1360 #audio_output {
1361 # type "osx"
1362 # name "My OS X Device"
1363 ## device "Built-in Output" # optional
1364 ## channel_map "-1,-1,0,1" # optional
1365 #}
1366 #
1367 ## Example "pipe" output:
1368 #
1369 #audio_output {
1370 # type "pipe"
1371 # name "my pipe"
1372 # command "aplay -f cd 2>/dev/null"
1373 ## Or if you're want to use AudioCompress
1374 # command "AudioCompress -m | aplay -f cd 2>/dev/null"
1375 ## Or to send raw PCM stream through PCM:
1376 # command "nc example.org 8765"
1377 # format "44100:16:2"
1378 #}
1379 #
1380 ## An example of a null output (for no audio output):
1381 #
1382 #audio_output {
1383 # type "null"
1384 # name "My Null Output"
1385 # mixer_type "none" # optional
1386 #}
1387 #
1388 ###############################################################################
1389
1390
1391 # Normalization automatic volume adjustments ##################################
1392 #
1393 # This setting specifies the type of ReplayGain to use. This setting can have
1394 # the argument "off", "album", "track" or "auto". "auto" is a special mode that
1395 # chooses between "track" and "album" depending on the current state of
1396 # random playback. If random playback is enabled then "track" mode is used.
1397 # See <http://www.replaygain.org> for more details about ReplayGain.
1398 # This setting is off by default.
1399 #
1400 #replaygain "album"
1401 #
1402 # This setting sets the pre-amp used for files that have ReplayGain tags. By
1403 # default this setting is disabled.
1404 #
1405 #replaygain_preamp "0"
1406 #
1407 # This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1408 # By default this setting is disabled.
1409 #
1410 #replaygain_missing_preamp "0"
1411 #
1412 # This setting enables or disables ReplayGain limiting.
1413 # MPD calculates actual amplification based on the ReplayGain tags
1414 # and replaygain_preamp / replaygain_missing_preamp setting.
1415 # If replaygain_limit is enabled MPD will never amplify audio signal
1416 # above its original level. If replaygain_limit is disabled such amplification
1417 # might occur. By default this setting is enabled.
1418 #
1419 #replaygain_limit "yes"
1420 #
1421 # This setting enables on-the-fly normalization volume adjustment. This will
1422 # result in the volume of all playing audio to be adjusted so the output has
1423 # equal "loudness". This setting is disabled by default.
1424 #
1425 #volume_normalization "no"
1426 #
1427 ###############################################################################
1428
1429 # Character Encoding ##########################################################
1430 #
1431 # If file or directory names do not display correctly for your locale then you
1432 # may need to modify this setting.
1433 #
1434 #filesystem_charset "UTF-8"
1435 #
1436 ###############################################################################
1437 #+end_src
1438
1439 ** msmtp
1440 :PROPERTIES:
1441 :header-args+: :tangle ~/.msmtprc
1442 :END:
1443
1444 #+begin_src conf
1445 # Set default values for all following accounts.
1446 defaults
1447 port 587
1448 tls on
1449 auth on
1450 #tls_trust_file /etc/ssl/certs/ca-certificates.crt
1451 logfile ~/.msmtp.log
1452
1453 # aminb
1454 account aminb
1455 host nix.aminb.org
1456 tls_fingerprint 65:DD:B8:32:D8:CD:F1:DC:B6:34:EE:35:04:18:AC:09:F3:1D:6D:20:F2:4A:E2:BD:64:48:B7:1F:90:BD:C4:BA
1457 tls_starttls on
1458 from amin@aminb.org
1459 user amin@aminb.org
1460 passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
1461
1462 # gnu
1463 account gnu
1464 host fencepost.gnu.org
1465 # use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1466 tls_fingerprint 28:70:42:76:1C:EC:91:5F:D1:B3:27:A1:CD:3B:32:A4:8B:0B:DC:3A:CD:CA:F6:6F:E4:61:BA:69:D7:4D:0D:0B
1467 tls_starttls on
1468 from aminb@gnu.org
1469 user aminb
1470 passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
1471
1472 # uwaterloo
1473 account uwaterloo
1474 host connect.uwaterloo.ca
1475 tls_starttls on
1476 from abandali@uwaterloo.ca
1477 user abandali
1478 passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
1479 tls_trust_file /etc/ssl/certs/ca-certificates.crt
1480
1481 # uwaterloo (friendly address)
1482 account uwaterloo-friendly : uwaterloo
1483 from amin.bandali@uwaterloo.ca
1484
1485 # Set a default account
1486 account default : aminb
1487 #+end_src
1488
1489 ** ncmpcpp
1490
1491 *** config
1492 :PROPERTIES:
1493 :header-args+: :tangle ~/.ncmpcpp/config
1494 :END:
1495
1496 #+begin_src conf :tangle no
1497 ##############################################################
1498 ## This is the example configuration file. Copy it to ##
1499 ## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
1500 ## and set up your preferences. ##
1501 ##############################################################
1502 #
1503 ##### directories ######
1504 ##
1505 ## Directory for storing ncmpcpp related files.
1506 ## Changing it is useful if you want to store
1507 ## everything somewhere else and provide command
1508 ## line setting for alternative location to config
1509 ## file which defines that while launching ncmpcpp.
1510 ##
1511 #
1512 ncmpcpp_directory = ~/.ncmpcpp
1513 #
1514 ##
1515 ## Directory for storing downloaded lyrics. It
1516 ## defaults to ~/.lyrics since other MPD clients
1517 ## (eg. ncmpc) also use that location.
1518 ##
1519 #
1520 #lyrics_directory = ~/.lyrics
1521 #
1522 ##### connection settings #####
1523 #
1524 #mpd_host = localhost
1525 #
1526 #mpd_port = 6600
1527 #
1528 #mpd_connection_timeout = 5
1529 #
1530 ## Needed for tag editor and file operations to work.
1531 ##
1532 mpd_music_dir = ~/usr/music
1533 #
1534 #mpd_crossfade_time = 5
1535 #
1536 ##### music visualizer #####
1537 ##
1538 ## Note: In order to make music visualizer work you'll
1539 ## need to use mpd fifo output, whose format parameter
1540 ## has to be set to 44100:16:1 for mono visualization
1541 ## or 44100:16:2 for stereo visualization. Example
1542 ## configuration (it has to be put into mpd.conf):
1543 ##
1544 ## audio_output {
1545 ## type "fifo"
1546 ## name "Visualizer feed"
1547 ## path "/tmp/mpd.fifo"
1548 ## format "44100:16:2"
1549 ## }
1550 ##
1551 #
1552 visualizer_fifo_path = /tmp/mpd.fifo
1553 #
1554 ##
1555 ## Note: Below parameter is needed for ncmpcpp
1556 ## to determine which output provides data for
1557 ## visualizer and thus allow syncing between
1558 ## visualization and sound as currently there
1559 ## are some problems with it.
1560 ##
1561 #
1562 visualizer_output_name = my fifo
1563 #
1564 ##
1565 ## If you set format to 44100:16:2, make it 'yes'.
1566 ##
1567 visualizer_in_stereo = yes
1568 #
1569 ##
1570 ## Multiply received samples by given value. Very
1571 ## useful for proper visualization of quiet music.
1572 ##
1573 #visualizer_sample_multiplier = 1
1574 #
1575 ##
1576 ## Note: Below parameter defines how often ncmpcpp
1577 ## has to "synchronize" visualizer and audio outputs.
1578 ## 30 seconds is optimal value, but if you experience
1579 ## synchronization problems, set it to lower value.
1580 ## Keep in mind that sane values start with >=10.
1581 ##
1582 #
1583 visualizer_sync_interval = 30
1584 #
1585 ##
1586 ## Note: To enable spectrum frequency visualization
1587 ## you need to compile ncmpcpp with fftw3 support.
1588 ##
1589 #
1590 ## Available values: spectrum, wave, wave_filled, ellipse.
1591 ##
1592 visualizer_type = spectrum
1593 #
1594 #visualizer_look = ●▮
1595 visualizer_look = "●•"
1596 #
1597 #visualizer_color = blue, cyan, green, yellow, magenta, red
1598 #
1599 ## Alternative subset of 256 colors for terminals that support it.
1600 ##
1601 #visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
1602 #
1603 ##### system encoding #####
1604 ##
1605 ## ncmpcpp should detect your charset encoding
1606 ## but if it failed to do so, you can specify
1607 ## charset encoding you are using here.
1608 ##
1609 ## Note: You can see whether your ncmpcpp build
1610 ## supports charset detection by checking output
1611 ## of `ncmpcpp --version`.
1612 ##
1613 ## Note: Since MPD uses UTF-8 by default, setting
1614 ## this option makes sense only if your encoding
1615 ## is different.
1616 ##
1617 #
1618 #system_encoding = ""
1619 #
1620 ##### delays #####
1621 #
1622 ## Time of inactivity (in seconds) after playlist
1623 ## highlighting will be disabled (0 = always on).
1624 ##
1625 #playlist_disable_highlight_delay = 5
1626 #
1627 ## Defines how long messages are supposed to be visible.
1628 ##
1629 #message_delay_time = 5
1630 #
1631 ##### song format #####
1632 ##
1633 ## For a song format you can use:
1634 ##
1635 ## %l - length
1636 ## %f - filename
1637 ## %D - directory
1638 ## %a - artist
1639 ## %A - album artist
1640 ## %t - title
1641 ## %b - album
1642 ## %y - date
1643 ## %n - track number (01/12 -> 01)
1644 ## %N - full track info (01/12 -> 01/12)
1645 ## %g - genre
1646 ## %c - composer
1647 ## %p - performer
1648 ## %d - disc
1649 ## %C - comment
1650 ## %P - priority
1651 ## $R - begin right alignment
1652 ##
1653 ## If you want to make sure that a part of the format is displayed
1654 ## only when certain tags are present, you can archieve it by
1655 ## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
1656 ## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
1657 ## It is also possible to define a list of alternatives by providing
1658 ## several groups and separating them with '|', e.g. '{%t}|{%f}'
1659 ## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
1660 ## present.
1661 ##
1662 ## Note: If you want to set limit on maximal length of a tag, just
1663 ## put the appropriate number between % and character that defines
1664 ## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
1665 ##
1666 ## In addition, formats support markers used for text attributes.
1667 ## They are followed by character '$'. After that you can put:
1668 ##
1669 ## - 0 - default window color (discards all other colors)
1670 ## - 1 - black
1671 ## - 2 - red
1672 ## - 3 - green
1673 ## - 4 - yellow
1674 ## - 5 - blue
1675 ## - 6 - magenta
1676 ## - 7 - cyan
1677 ## - 8 - white
1678 ## - 9 - end of current color
1679 ## - b - bold text
1680 ## - u - underline text
1681 ## - r - reverse colors
1682 ## - a - use alternative character set
1683 ##
1684 ## If you don't want to use a non-color attribute anymore, just put it
1685 ## again, but this time insert character '/' between '$' and attribute
1686 ## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
1687 ## or filename with reversed colors.
1688 ##
1689 ## If you want to use 256 colors and/or background colors in formats
1690 ## (the naming scheme is described below in section about color
1691 ## definitions), it can be done with the syntax $(COLOR), e.g. to set
1692 ## the artist tag to one of the non-standard colors and make it have
1693 ## yellow background, you need to write $(197_yellow)%a$(end). Note
1694 ## that for standard colors this is interchangable with attributes
1695 ## listed above.
1696 ##
1697 ## Note: colors can be nested.
1698 ##
1699 #
1700 #song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
1701 #
1702 #song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
1703 #
1704 #song_library_format = {%n - }{%t}|{%f}
1705 #
1706 #
1707 #alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
1708 #
1709 #alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
1710 #
1711 #now_playing_prefix = $b
1712 #
1713 #now_playing_suffix = $/b
1714 #
1715 #browser_playlist_prefix = "$2playlist$9 "
1716 #
1717 #selected_item_prefix = $6
1718 #
1719 #selected_item_suffix = $9
1720 #
1721 #modified_item_prefix = $3> $9
1722 #
1723 ##
1724 ## Note: attributes are not supported for the following variables.
1725 ##
1726 #song_window_title_format = {%a - }{%t}|{%f}
1727 ##
1728 ## Note: Below variables are used for sorting songs in browser.
1729 ## The sort mode determines how songs are sorted, and can be used
1730 ## in combination with a sort format to specify a custom sorting format.
1731 ## Available values for browser_sort_mode are "name", "mtime", "format"
1732 ## and "noop".
1733 ##
1734 #
1735 #browser_sort_mode = name
1736 #
1737 #browser_sort_format = {%a - }{%t}|{%f} {(%l)}
1738 #
1739 ##### columns settings #####
1740 ##
1741 ## syntax of song columns list format is "column column etc."
1742 ##
1743 ## - syntax for each column is:
1744 ##
1745 ## (width of the column)[color of the column]{displayed tag}
1746 ##
1747 ## Note: Width is by default in %, if you want a column to
1748 ## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
1749 ## will be the column that take 10% of screen (so the real width
1750 ## will depend on actual screen size), whereas (10f)[white]{a}
1751 ## will take 10 terminal cells, no matter how wide the screen is.
1752 ##
1753 ## - color is optional (if you want the default one,
1754 ## leave the field empty).
1755 ##
1756 ## Note: You can give a column additional attributes by putting appropriate
1757 ## character after displayed tag character. Available attributes are:
1758 ##
1759 ## - r - column will be right aligned
1760 ## - E - if tag is empty, empty tag marker won't be displayed
1761 ##
1762 ## You can also:
1763 ##
1764 ## - give a column custom name by putting it after attributes,
1765 ## separated with character ':', e.g. {lr:Length} gives you
1766 ## right aligned column of lengths named "Length".
1767 ##
1768 ## - define sequence of tags, that have to be displayed in case
1769 ## predecessor is empty in a way similar to the one in classic
1770 ## song format, i.e. using '|' character, e.g. {a|c|p:Owner}
1771 ## creates column named "Owner" that tries to display artist
1772 ## tag and then composer and performer if previous ones are
1773 ## not available.
1774 ##
1775 #
1776 #song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
1777 #
1778 ##### various settings #####
1779 #
1780 ##
1781 ## Note: Custom command that will be executed each
1782 ## time song changes. Useful for notifications etc.
1783 ##
1784 #execute_on_song_change = ""
1785 #
1786 #playlist_show_mpd_host = no
1787 #
1788 #playlist_show_remaining_time = no
1789 #
1790 #playlist_shorten_total_times = no
1791 #
1792 #playlist_separate_albums = no
1793 #
1794 ##
1795 ## Note: Possible display modes: classic, columns.
1796 ##
1797 #playlist_display_mode = columns
1798 #
1799 #browser_display_mode = classic
1800 #
1801 #search_engine_display_mode = classic
1802 #
1803 #playlist_editor_display_mode = classic
1804 #
1805 #discard_colors_if_item_is_selected = yes
1806 #
1807 #incremental_seeking = yes
1808 #
1809 #seek_time = 1
1810 #
1811 #volume_change_step = 2
1812 #
1813 #autocenter_mode = no
1814 #
1815 #centered_cursor = no
1816 #
1817 ##
1818 ## Note: You can specify third character which will
1819 ## be used to build 'empty' part of progressbar.
1820 ##
1821 #progressbar_look = =>
1822 progressbar_look = "─╼╶"
1823 #progressbar_look = "─⊙╶"
1824 #
1825 #progressbar_boldness = yes
1826 #
1827 ## Available values: database, playlist.
1828 ##
1829 #default_place_to_search_in = database
1830 #
1831 ## Available values: classic, alternative.
1832 ##
1833 #user_interface = classic
1834 #
1835 #data_fetching_delay = yes
1836 #
1837 ## Available values: artist, album_artist, date, genre, composer, performer.
1838 ##
1839 #media_library_primary_tag = artist
1840 #
1841 ## Available values: wrapped, normal.
1842 ##
1843 #default_find_mode = wrapped
1844 #
1845 #default_tag_editor_pattern = %n - %t
1846 #
1847 #header_visibility = yes
1848 #
1849 #statusbar_visibility = yes
1850 #
1851 #titles_visibility = yes
1852 #
1853 #header_text_scrolling = yes
1854 #
1855 #cyclic_scrolling = no
1856 #
1857 #lines_scrolled = 2
1858 #
1859 #follow_now_playing_lyrics = no
1860 #
1861 #fetch_lyrics_for_current_song_in_background = no
1862 #
1863 #store_lyrics_in_song_dir = no
1864 #
1865 #generate_win32_compatible_filenames = yes
1866 #
1867 #allow_for_physical_item_deletion = no
1868 #
1869 ##
1870 ## Note: If you set this variable, ncmpcpp will try to
1871 ## get info from last.fm in language you set and if it
1872 ## fails, it will fall back to english. Otherwise it will
1873 ## use english the first time.
1874 ##
1875 ## Note: Language has to be expressed as an ISO 639 alpha-2 code.
1876 ##
1877 #lastfm_preferred_language = en
1878 #
1879 #show_hidden_files_in_local_browser = no
1880 #
1881 ##
1882 ## How shall screen switcher work?
1883 ##
1884 ## - "previous" - switch between the current and previous screen.
1885 ## - "screen1,...,screenN" - switch between given sequence of screens.
1886 ##
1887 ## Screens available for use: help, playlist, browser, search_engine,
1888 ## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
1889 ##
1890 #screen_switcher_mode = playlist, browser
1891 #
1892 ##
1893 ## Note: You can define startup screen
1894 ## by choosing screen from the list above.
1895 ##
1896 #startup_screen = playlist
1897 #
1898 ##
1899 ## Note: You can define startup slave screen
1900 ## by choosing screen from the list above or
1901 ## an empty value for no slave screen.
1902 ##
1903 #startup_slave_screen = ""
1904 #
1905 #startup_slave_screen_focus = no
1906 #
1907 ##
1908 ## Default width of locked screen (in %).
1909 ## Acceptable values are from 20 to 80.
1910 ##
1911 #
1912 #locked_screen_width_part = 50
1913 #
1914 #ask_for_locked_screen_width_part = yes
1915 #
1916 #jump_to_now_playing_song_at_start = yes
1917 #
1918 #ask_before_clearing_playlists = yes
1919 #
1920 #clock_display_seconds = no
1921 #
1922 #display_volume_level = yes
1923 #
1924 #display_bitrate = no
1925 #
1926 #display_remaining_time = no
1927 #
1928 ## Available values: none, basic, extended, perl.
1929 ##
1930 #regular_expressions = perl
1931 #
1932 ##
1933 ## Note: If below is enabled, ncmpcpp will ignore leading
1934 ## "The" word while sorting items in browser, tags in
1935 ## media library, etc.
1936 ##
1937 #ignore_leading_the = no
1938 #
1939 #block_search_constraints_change_if_items_found = yes
1940 #
1941 #mouse_support = yes
1942 #
1943 #mouse_list_scroll_whole_page = yes
1944 #
1945 #empty_tag_marker = <empty>
1946 #
1947 #tags_separator = " | "
1948 #
1949 #tag_editor_extended_numeration = no
1950 #
1951 #media_library_sort_by_mtime = no
1952 #
1953 #enable_window_title = yes
1954 #
1955 ##
1956 ## Note: You can choose default search mode for search
1957 ## engine. Available modes are:
1958 ##
1959 ## - 1 - use mpd built-in searching (no regexes, pattern matching)
1960 ## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
1961 ## but if your mpd is on a remote machine, downloading big database
1962 ## to process it can take a while
1963 ## - 3 - match only exact values (this mode uses mpd function for searching
1964 ## in database and local one for searching in current playlist)
1965 ##
1966 #
1967 #search_engine_default_search_mode = 1
1968 #
1969 #external_editor = nano
1970 #
1971 ## Note: set to yes if external editor is a console application.
1972 ##
1973 #use_console_editor = yes
1974 #
1975 ##### colors definitions #####
1976 ##
1977 ## It is possible to set a background color by setting a color
1978 ## value "<foreground>_<background>", e.g. red_black will set
1979 ## foregound color to red and background color to black.
1980 ##
1981 ## In addition, for terminals that support 256 colors it
1982 ## is possible to set one of them by using a number in range
1983 ## [1, 256] instead of color name, e.g. numerical value
1984 ## corresponding to red_black is 2_1. To find out if the
1985 ## terminal supports 256 colors, run ncmpcpp and check out
1986 ## the bottom of the help screen for list of available colors
1987 ## and their numerical values.
1988 ##
1989 ## Note: due to technical limitations of ncurses, if 256 colors
1990 ## are used, it is possible to either use only the colors with
1991 ## default background color, or all pairs from 1_1 up to 254_127,
1992 ## depending on the ncurses version used.
1993 ##
1994 #
1995 #colors_enabled = yes
1996 #
1997 #empty_tag_color = cyan
1998 #
1999 #header_window_color = default
2000 #
2001 #volume_color = default
2002 #
2003 #state_line_color = default
2004 #
2005 #state_flags_color = default
2006 #
2007 #main_window_color = yellow
2008 #
2009 #color1 = white
2010 #
2011 #color2 = green
2012 #
2013 #main_window_highlight_color = yellow
2014 #
2015 #progressbar_color = black
2016 #
2017 #progressbar_elapsed_color = green
2018 #
2019 #statusbar_color = default
2020 #
2021 #alternative_ui_separator_color = black
2022 #
2023 #active_column_color = red
2024 #
2025 #window_border_color = green
2026 #
2027 #active_window_border = red
2028 #
2029 #+end_src
2030
2031 *** bindings
2032 :PROPERTIES:
2033 :header-args+: :tangle ~/.ncmpcpp/bindings
2034 :END:
2035
2036 #+begin_src conf :tangle no
2037 def_key "j"
2038 scroll_down
2039 def_key "k"
2040 scroll_up
2041
2042 def_key "ctrl-u"
2043 page_up
2044 def_key "ctrl-d"
2045 page_down
2046
2047 def_key "h"
2048 previous_column
2049 def_key "l"
2050 next_column
2051
2052 def_key "."
2053 show_lyrics
2054
2055 def_key "n"
2056 next_found_item
2057 def_key "N"
2058 previous_found_item
2059
2060 def_key "J"
2061 move_sort_order_down
2062 def_key "K"
2063 move_sort_order_up
2064 #+end_src
2065
2066 ** notmuch
2067
2068 *** notmuch-config
2069 :PROPERTIES:
2070 :header-args+: :tangle ~/.notmuch-config
2071 :END:
2072
2073 #+begin_src conf
2074 # .notmuch-config - Configuration file for the notmuch mail system
2075 #
2076 # For more information about notmuch, see https://notmuchmail.org
2077
2078 # Database configuration
2079 #
2080 # The only value supported here is 'path' which should be the top-level
2081 # directory where your mail currently exists and to where mail will be
2082 # delivered in the future. Files should be individual email messages.
2083 # Notmuch will store its database within a sub-directory of the path
2084 # configured here named ".notmuch".
2085 #
2086 [database]
2087 path=/home/amin/mail
2088
2089 # User configuration
2090 #
2091 # Here is where you can let notmuch know how you would like to be
2092 # addressed. Valid settings are
2093 #
2094 # name Your full name.
2095 # primary_email Your primary email address.
2096 # other_email A list (separated by ';') of other email addresses
2097 # at which you receive email.
2098 #
2099 # Notmuch will use the various email addresses configured here when
2100 # formatting replies. It will avoid including your own addresses in the
2101 # recipient list of replies, and will set the From address based on the
2102 # address to which the original email was addressed.
2103 #
2104 [user]
2105 name=Amin Bandali
2106 primary_email=amin@aminb.org
2107 other_email=abandali@uwaterloo.ca;amin.bandali@uwaterloo.ca;aminb@gnu.org;
2108
2109 # Configuration for "notmuch new"
2110 #
2111 # The following options are supported here:
2112 #
2113 # tags A list (separated by ';') of the tags that will be
2114 # added to all messages incorporated by "notmuch new".
2115 #
2116 # ignore A list (separated by ';') of file and directory names
2117 # that will not be searched for messages by "notmuch new".
2118 #
2119 # NOTE: *Every* file/directory that goes by one of those
2120 # names will be ignored, independent of its depth/location
2121 # in the mail store.
2122 #
2123 [new]
2124 tags=new;
2125 #tags=unread;inbox;
2126 ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
2127
2128 # Search configuration
2129 #
2130 # The following option is supported here:
2131 #
2132 # exclude_tags
2133 # A ;-separated list of tags that will be excluded from
2134 # search results by default. Using an excluded tag in a
2135 # query will override that exclusion.
2136 #
2137 [search]
2138 exclude_tags=deleted;spam;
2139
2140 # Maildir compatibility configuration
2141 #
2142 # The following option is supported here:
2143 #
2144 # synchronize_flags Valid values are true and false.
2145 #
2146 # If true, then the following maildir flags (in message filenames)
2147 # will be synchronized with the corresponding notmuch tags:
2148 #
2149 # Flag Tag
2150 # ---- -------
2151 # D draft
2152 # F flagged
2153 # P passed
2154 # R replied
2155 # S unread (added when 'S' flag is not present)
2156 #
2157 # The "notmuch new" command will notice flag changes in filenames
2158 # and update tags, while the "notmuch tag" and "notmuch restore"
2159 # commands will notice tag changes and update flags in filenames
2160 #
2161 [maildir]
2162 synchronize_flags=true
2163
2164 # Cryptography related configuration
2165 #
2166 # The following option is supported here:
2167 #
2168 # gpg_path
2169 # binary name or full path to invoke gpg.
2170 #
2171 [crypto]
2172 gpg_path=gpg
2173 #+end_src
2174
2175 *** pre-new hook
2176 :PROPERTIES:
2177 :header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
2178 :END:
2179
2180 #+begin_src sh
2181 touch /tmp/gnusieve.log
2182 sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
2183 -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
2184 #+end_src
2185
2186 *** post-new hook
2187 :PROPERTIES:
2188 :header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
2189 :END:
2190
2191 #+begin_src sh
2192 # apply sent tag to messages sent by me
2193 notmuch tag -new +sent -- from:amin@aminb.org or from:aminb@gnu.org or from:abandali@uwaterloo.ca or from:amin.bandali@uwaterloo.ca
2194
2195 # initial tagging
2196 notmuch tag -latest -- tag:latest
2197 notmuch tag +inbox +unread +latest -new -- tag:new
2198
2199
2200 # apply tags to lists
2201
2202 # <aminb>
2203 notmuch tag -inbox +lists/~sircmpwn/srht-admins -- folder:amin/lists/~sircmpwn/srht-admins
2204 notmuch tag -inbox +lists/~sircmpwn/srht-announce -- folder:amin/lists/~sircmpwn/srht-announce
2205 notmuch tag -inbox +lists/~sircmpwn/srht-dev -- folder:amin/lists/~sircmpwn/srht-dev
2206 notmuch tag -inbox +lists/~sircmpwn/srht-discuss -- folder:amin/lists/~sircmpwn/srht-discuss
2207
2208 notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
2209 notmuch tag -inbox +lists/haskell-weekly -- folder:amin/lists/haskell-weekly
2210
2211 notmuch tag -inbox +pay -- folder:amin/pay
2212 # </aminb>
2213
2214 # <uw>
2215 notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
2216 notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
2217
2218 notmuch tag -inbox +lists/clvsingle -- folder:uwaterloo/lists/Clvsingle
2219 notmuch tag -inbox +lists/gsa -- folder:uwaterloo/lists/GSA
2220 notmuch tag -inbox +lists/math-grad -- folder:uwaterloo/lists/Math-grad
2221 notmuch tag -inbox +lists/scs-grads -- folder:uwaterloo/lists/scs-grads
2222 notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
2223 # </uw>
2224
2225 # <gnu>
2226 notmuch tag -inbox +lists/emacs-devel -- folder:gnu/l/emacs-devel
2227 notmuch tag -inbox +lists/emacs-orgmode -- folder:gnu/l/emacs-orgmode
2228 notmuch tag -inbox +lists/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
2229 notmuch tag -inbox +lists/fencepost-users -- folder:gnu/l/fencepost-users
2230 notmuch tag -inbox +lists/guix-devel -- folder:gnu/l/guix-devel
2231 notmuch tag -inbox +lists/guile-devel -- folder:gnu/l/guile-devel
2232 notmuch tag -inbox +lists/help-gnu-emacs -- folder:gnu/l/help-gnu-emacs
2233 notmuch tag -inbox +lists/info-gnu-emacs -- folder:gnu/l/info-gnu-emacs
2234 notmuch tag -inbox +lists/www-commits -- folder:gnu/l/www-commits
2235 notmuch tag -inbox +lists/www-discuss -- folder:gnu/l/www-discuss
2236 notmuch tag -inbox +webmasters -- folder:gnu/webmasters
2237
2238 notmuch tag -inbox +lists/deepspec -- folder:gnu/l/deepspec
2239 notmuch tag -inbox +lists/haskell-cafe -- folder:gnu/l/haskell-cafe
2240 notmuch tag -inbox +lists/haskell-art -- folder:gnu/l/haskell-art
2241 notmuch tag -inbox +lists/notmuch -- folder:gnu/l/notmuch
2242 # </gnu>
2243
2244 notmuch tag -inbox -unread +archive/notmuch -- path:archive/notmuch/**
2245 notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**
2246 #+end_src
2247
2248 *** notmuch.service
2249 :PROPERTIES:
2250 :header-args+: :tangle ~/.config/systemd/user/notmuch.service
2251 :END:
2252
2253 #+begin_src conf :tangle no
2254 [Unit]
2255 Description=notmuch service
2256
2257 [Service]
2258 Type=oneshot
2259 ExecStart=/usr/bin/notmuch new
2260 StandardOutput=syslog
2261 StandardError=syslog
2262 #+end_src
2263
2264 *** notmuch.timer
2265 :PROPERTIES:
2266 :header-args+: :tangle ~/.config/systemd/user/notmuch.timer
2267 :END:
2268
2269 #+begin_src conf :tangle no
2270 [Unit]
2271 Description=notmuch timer
2272
2273 [Timer]
2274 OnCalendar=*:0/5
2275 Persistent=true
2276 Unit=notmuch.service
2277
2278 [Install]
2279 WantedBy=timers.target
2280 #+end_src
2281
2282 ** offlineimap
2283
2284 *** offlineimaprc
2285 :PROPERTIES:
2286 :header-args+: :tangle ~/.offlineimaprc
2287 :END:
2288
2289 #+begin_src conf :tangle no
2290 [general]
2291 pythonfile = ~/.offlineimap.py
2292 accounts = Gmail, aminb
2293 maxsyncaccounts = 3
2294
2295 [Account Gmail]
2296 localrepository = GmailL
2297 remoterepository = GmailR
2298
2299 [Account aminb]
2300 localrepository = aminbL
2301 remoterepository = aminbR
2302
2303 [Repository GmailL]
2304 type = Maildir
2305 localfolders = ~/Maildir/Gmail
2306
2307 [Repository GmailR]
2308 type = IMAP
2309 remotehost = imap.gmail.com
2310 remoteusereval = mailuser("gmail")
2311 remotepasseval = mailpasswd("gmail")
2312 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2313 ssl = yes
2314 folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
2315 maxconnections = 1
2316 realdelete = no
2317
2318 [Repository aminbL]
2319 type = Maildir
2320 localfolders = ~/Maildir/aminb
2321
2322 [Repository aminbR]
2323 type = IMAP
2324 remotehost = mail.aminb.org
2325 remoteusereval = mailuser("aminb")
2326 remotepasseval = mailpasswd("aminb")
2327 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2328 ssl = yes
2329 folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
2330 maxconnections = 1
2331 realdelete = no
2332 #+end_src
2333
2334 *** offlineimap.py
2335 :PROPERTIES:
2336 :header-args+: :tangle ~/.offlineimap.py
2337 :END:
2338
2339 #+begin_src python :tangle no
2340 import os
2341 import subprocess
2342
2343 def mailpasswd(acct):
2344 acct = os.path.basename(acct)
2345 path = "/home/amin/.passwd/%s.gpg" % acct
2346 args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
2347 try:
2348 return subprocess.check_output(args).strip()
2349 except subprocess.CalledProcessError:
2350 return ""
2351
2352 def mailuser(acct):
2353 acct = os.path.basename(acct)
2354 path = "/home/amin/.passwd/%s" % acct
2355 args = ["cat", path]
2356 try:
2357 return subprocess.check_output(args).strip()
2358 except subprocess.CalledProcessError:
2359 return ""
2360
2361 def prime_gpg_agent():
2362 ret = False
2363 i = 1
2364 while not ret:
2365 ret = (mailpasswd("prime") == "prime")
2366 if i > 2:
2367 from offlineimap.ui import getglobalui
2368 sys.stderr.write("Error reading in passwords. Terminating.\n")
2369 getglobalui().terminate()
2370 i += 1
2371 return ret
2372
2373 prime_gpg_agent()
2374 #+end_src
2375
2376 ** pigeonhole
2377 *** gnu.sieve
2378 :PROPERTIES:
2379 :header-args+: :tangle ~/sieve/gnu.sieve :comments none
2380 :END:
2381
2382 #+begin_src conf
2383 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags", "include" ];
2384
2385 if anyof (
2386 address :is "from" "webmasters@gnu.org",
2387 address :is "from" "webmasters-comment@gnu.org") {
2388 fileinto :create "webmasters";
2389 stop;
2390 }
2391
2392 include :personal "lists";
2393 #+end_src
2394
2395 *** lists.sieve
2396 :PROPERTIES:
2397 :header-args+: :tangle ~/sieve/lists.sieve :comments none
2398 :END:
2399
2400 #+begin_src conf
2401 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags",
2402 "include" ];
2403
2404 if anyof (
2405 header :contains "list-id" "<emacs-devel.gnu.org>",
2406 header :contains "list-id" "<emacs-orgmode.gnu.org>",
2407 header :contains "list-id" "<emacsconf-discuss.gnu.org>",
2408 header :contains "list-id" "<fencepost-users.gnu.org>",
2409 header :contains "list-id" "<guix-devel.gnu.org>",
2410 header :contains "list-id" "<guile-devel.gnu.org>",
2411 header :contains "list-id" "<help-gnu-emacs.gnu.org>",
2412 header :contains "list-id" "<info-gnu-emacs.gnu.org>",
2413 header :contains "list-id" "<www-commits.gnu.org>",
2414 header :contains "list-id" "<www-discuss.gnu.org>",
2415 header :contains "list-id" "<deepspec.lists.cs.princeton.edu>",
2416 header :contains "list-id" "<haskell-cafe.haskell.org>",
2417 header :contains "list-id" "<haskell-art.we.lurk.org>",
2418 header :contains "list-id" "<notmuch.notmuchmail.org>") {
2419 if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
2420 set :lower "listname" "${1}";
2421 fileinto :create "l/${listname}";
2422 }
2423 }
2424 #+end_src
2425
2426 ** polybar
2427
2428 *** config
2429 :PROPERTIES:
2430 :header-args+: :tangle ~/.config/polybar/config
2431 :END:
2432
2433 #+begin_src conf :tangle no
2434 ;=====================================================
2435 ;
2436 ; To learn more about how to configure Polybar
2437 ; go to https://github.com/jaagr/polybar
2438 ;
2439 ; The README contains alot of information
2440 ;
2441 ;=====================================================
2442
2443 [colors]
2444 ;background = ${xrdb:color0:#222}
2445 background = #222
2446 background-alt = #444
2447 ;foreground = ${xrdb:color7:#222}
2448 foreground = #eee
2449 foreground-alt = #888
2450 primary = #ffb52a
2451 secondary = #e60053
2452 alert = #bd2c40
2453
2454 [bar/main]
2455 ;monitor = ${env:MONITOR:HDMI-1}
2456 width = 100%
2457 height = 27
2458 ;offset-x = 1%
2459 ;offset-y = 1%
2460 radius = 3.0
2461 fixed-center = true
2462
2463 background = ${colors.background}
2464 foreground = ${colors.foreground}
2465
2466 line-size = 3
2467 line-color = #f00
2468
2469 border-size = 4
2470 border-color = #00000000
2471
2472 padding-left = 0
2473 padding-right = 2
2474
2475 module-margin-left = 2
2476 module-margin-right = 2
2477
2478 font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
2479 font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
2480 font-2 = Wuncon Siji:pixelsize=10;1
2481 font-3 = FontAwesome:pixelsize=10;1
2482
2483 modules-left = bspwm xwindow
2484 modules-center =
2485 modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
2486
2487 tray-position = right
2488 tray-padding = 1
2489 ;tray-transparent = true
2490 ;tray-background = #0063ff
2491 tray-maxsize = 18
2492
2493 wm-restack = bspwm
2494
2495 ;override-redirect = true
2496
2497 scroll-up = bspwm-desknext
2498 scroll-down = bspwm-deskprev
2499
2500 [module/xwindow]
2501 type = internal/xwindow
2502 label = %title:0:50:...%
2503
2504 [module/xkeyboard]
2505 type = internal/xkeyboard
2506 blacklist-0 = num lock
2507
2508 format-prefix = " "
2509 format-prefix-foreground = ${colors.foreground-alt}
2510 format-prefix-underline = ${colors.secondary}
2511
2512 label-layout = %layout%
2513 label-layout-underline = ${colors.secondary}
2514
2515 label-indicator-padding = 2
2516 label-indicator-margin = 1
2517 label-indicator-background = ${colors.secondary}
2518 label-indicator-underline = ${colors.secondary}
2519
2520 [module/filesystem]
2521 type = internal/fs
2522 interval = 25
2523
2524 mount-0 = /
2525
2526 label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
2527 label-unmounted = %mountpoint% not mounted
2528 label-unmounted-foreground = ${colors.foreground-alt}
2529
2530 [module/bspwm]
2531 type = internal/bspwm
2532
2533 label-focused = %index%
2534 label-focused-background = ${colors.background-alt}
2535 label-focused-underline= ${colors.primary}
2536 label-focused-padding = 2
2537
2538 label-occupied = %index%
2539 label-occupied-padding = 2
2540
2541 label-urgent = %index%!
2542 label-urgent-background = ${colors.alert}
2543 label-urgent-padding = 2
2544
2545 label-empty = %index%
2546 label-empty-foreground = ${colors.foreground-alt}
2547 label-empty-padding = 2
2548
2549 [module/i3]
2550 type = internal/i3
2551 format = <label-state> <label-mode>
2552 index-sort = true
2553 wrapping-scroll = false
2554
2555 ; Only show workspaces on the same output as the bar
2556 ;pin-workspaces = true
2557
2558 label-mode-padding = 2
2559 label-mode-foreground = #000
2560 label-mode-background = ${colors.primary}
2561
2562 ; focused = Active workspace on focused monitor
2563 label-focused = %index%
2564 label-focused-background = ${module/bspwm.label-focused-background}
2565 label-focused-underline = ${module/bspwm.label-focused-underline}
2566 label-focused-padding = ${module/bspwm.label-focused-padding}
2567
2568 ; unfocused = Inactive workspace on any monitor
2569 label-unfocused = %index%
2570 label-unfocused-padding = ${module/bspwm.label-occupied-padding}
2571
2572 ; visible = Active workspace on unfocused monitor
2573 label-visible = %index%
2574 label-visible-background = ${self.label-focused-background}
2575 label-visible-underline = ${self.label-focused-underline}
2576 label-visible-padding = ${self.label-focused-padding}
2577
2578 ; urgent = Workspace with urgency hint set
2579 label-urgent = %index%
2580 label-urgent-background = ${module/bspwm.label-urgent-background}
2581 label-urgent-padding = ${module/bspwm.label-urgent-padding}
2582
2583 [module/mpd]
2584 type = internal/mpd
2585 format-online = <label-song> <icon-prev> <icon-stop> <toggle> <icon-next>
2586
2587 icon-prev = 
2588 icon-stop = 
2589 icon-play = 
2590 icon-pause = 
2591 icon-next = 
2592
2593 label-song-maxlen = 25
2594 label-song-ellipsis = true
2595
2596 [module/xbacklight]
2597 type = internal/xbacklight
2598
2599 format = <label> <bar>
2600 label = BL
2601
2602 bar-width = 10
2603 bar-indicator = |
2604 bar-indicator-foreground = #ff
2605 bar-indicator-font = 2
2606 bar-fill = ─
2607 bar-fill-font = 2
2608 bar-fill-foreground = #9f78e1
2609 bar-empty = ─
2610 bar-empty-font = 2
2611 bar-empty-foreground = ${colors.foreground-alt}
2612
2613 [module/backlight-acpi]
2614 inherit = module/xbacklight
2615 type = internal/backlight
2616 ;card = intel_backlight
2617 card = mba6x_backlight
2618
2619 [module/cpu]
2620 type = internal/cpu
2621 interval = 2
2622 format-prefix = " "
2623 format-prefix-foreground = ${colors.foreground-alt}
2624 format-underline = #f90000
2625 label = %percentage%%
2626
2627 [module/memory]
2628 type = internal/memory
2629 interval = 2
2630 format-prefix = " "
2631 format-prefix-foreground = ${colors.foreground-alt}
2632 format-underline = #4bffdc
2633 label = %percentage_used%%
2634
2635 [module/wlan]
2636 type = internal/network
2637 interface =
2638 interval = 3.0
2639
2640 format-connected = <ramp-signal> <label-connected>
2641 format-connected-underline = #9f78e1
2642 label-connected = %essid%
2643
2644 format-disconnected =
2645 ;format-disconnected = <label-disconnected>
2646 ;format-disconnected-underline = ${self.format-connected-underline}
2647 ;label-disconnected = %ifname% disconnected
2648 ;label-disconnected-foreground = ${colors.foreground-alt}
2649
2650 ramp-signal-0 = 
2651 ramp-signal-1 = 
2652 ramp-signal-2 = 
2653 ramp-signal-3 = 
2654 ramp-signal-4 = 
2655 ramp-signal-foreground = ${colors.foreground-alt}
2656
2657 [module/eth]
2658 type = internal/network
2659 interface =
2660 interval = 3.0
2661
2662 format-connected-underline = #55aa55
2663 format-connected-prefix = " "
2664 format-connected-prefix-foreground = ${colors.foreground-alt}
2665 label-connected = %local_ip%
2666
2667 format-disconnected =
2668 ;format-disconnected = <label-disconnected>
2669 ;format-disconnected-underline = ${self.format-connected-underline}
2670 ;label-disconnected = %ifname% disconnected
2671 ;label-disconnected-foreground = ${colors.foreground-alt}
2672
2673 [module/date]
2674 type = internal/date
2675 interval = 5
2676
2677 date =
2678 date-alt = " %Y-%m-%d"
2679
2680 time = %H:%M
2681 time-alt = %H:%M:%S
2682
2683 format-prefix = 
2684 format-prefix-foreground = ${colors.foreground-alt}
2685 format-underline = #0a6cf5
2686
2687 label = %date% %time%
2688
2689 [module/volume]
2690 type = internal/volume
2691
2692 format-volume = <label-volume> <bar-volume>
2693 label-volume = vol
2694 label-volume-foreground = ${root.foreground}
2695
2696 format-muted-prefix = " "
2697 format-muted-foreground = ${colors.foreground-alt}
2698 label-muted = mute
2699
2700 bar-volume-width = 10
2701 bar-volume-foreground-0 = #55aa55
2702 bar-volume-foreground-1 = #55aa55
2703 bar-volume-foreground-2 = #55aa55
2704 bar-volume-foreground-3 = #55aa55
2705 bar-volume-foreground-4 = #55aa55
2706 bar-volume-foreground-5 = #f5a70a
2707 bar-volume-foreground-6 = #ff5555
2708 bar-volume-gradient = false
2709 bar-volume-indicator = |
2710 bar-volume-indicator-font = 2
2711 bar-volume-fill = ─
2712 bar-volume-fill-font = 2
2713 bar-volume-empty = ─
2714 bar-volume-empty-font = 2
2715 bar-volume-empty-foreground = ${colors.foreground-alt}
2716
2717 [module/battery]
2718 type = internal/battery
2719 battery = BAT0
2720 adapter = ADP1
2721 full-at = 64
2722
2723 format-charging = <animation-charging> <label-charging>
2724 format-charging-underline = #ffb52a
2725
2726 format-discharging = <ramp-capacity> <label-discharging>
2727 format-discharging-underline = ${self.format-charging-underline}
2728
2729 format-full-prefix = " "
2730 format-full-prefix-foreground = ${colors.foreground-alt}
2731 format-full-underline = ${self.format-charging-underline}
2732
2733 ramp-capacity-0 = 
2734 ramp-capacity-1 = 
2735 ramp-capacity-2 = 
2736 ramp-capacity-foreground = ${colors.foreground-alt}
2737
2738 animation-charging-0 = 
2739 animation-charging-1 = 
2740 animation-charging-2 = 
2741 animation-charging-foreground = ${colors.foreground-alt}
2742 animation-charging-framerate = 750
2743
2744 [module/temperature]
2745 type = internal/temperature
2746 thermal-zone = 1
2747 warn-temperature = 66
2748
2749 format = <ramp> <label>
2750 format-underline = #f50a4d
2751 format-warn = <ramp> <label-warn>
2752 format-warn-underline = ${self.format-underline}
2753
2754 label = %temperature%
2755 label-warn = %temperature%
2756 label-warn-foreground = ${colors.secondary}
2757
2758 ramp-0 = 
2759 ramp-1 = 
2760 ramp-2 = 
2761 ramp-foreground = ${colors.foreground-alt}
2762
2763 [module/powermenu]
2764 type = custom/menu
2765
2766 format-spacing = 1
2767
2768 label-open = 
2769 label-open-foreground = ${colors.secondary}
2770 label-close =  cancel
2771 label-close-foreground = ${colors.secondary}
2772 label-separator = |
2773 label-separator-foreground = ${colors.foreground-alt}
2774
2775 menu-0-0 = reboot
2776 menu-0-0-exec = menu-open-1
2777 menu-0-1 = power off
2778 menu-0-1-exec = menu-open-2
2779
2780 menu-1-0 = cancel
2781 menu-1-0-exec = menu-open-0
2782 menu-1-1 = reboot
2783 menu-1-1-exec = sudo reboot
2784
2785 menu-2-0 = power off
2786 menu-2-0-exec = sudo poweroff
2787 menu-2-1 = cancel
2788 menu-2-1-exec = menu-open-0
2789
2790 [module/mail]
2791 type = custom/script
2792 interval = 60
2793 format = <label>
2794 format-prefix = " "
2795 format-prefix-foreground = ${colors.foreground-alt}
2796 format-underline = #0a6cf5
2797 exec = notmuch count tag:unread
2798
2799 [settings]
2800 screenchange-reload = true
2801 ;compositing-background = xor
2802 ;compositing-background = screen
2803 ;compositing-foreground = source
2804 ;compositing-border = over
2805
2806 [global/wm]
2807 margin-top = 0
2808 margin-bottom = 0
2809
2810 ; vim:ft=dosini
2811 #+end_src
2812
2813 *** polybar-launch
2814 :PROPERTIES:
2815 :header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
2816 :END:
2817
2818 #+begin_src sh :tangle no
2819 # Terminate already running bar instances
2820 killall -q polybar
2821
2822 # Wait until the processes have been shut down
2823 while pgrep -x polybar >/dev/null; do sleep 1; done
2824
2825 # Launch main bar
2826 polybar main &
2827
2828 echo "Bars launched..."
2829 #+end_src
2830
2831 ** PowerTOP
2832 :PROPERTIES:
2833 :header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
2834 :END:
2835
2836 #+begin_src conf
2837 [Unit]
2838 Description=Powertop tunings
2839
2840 [Service]
2841 ExecStart=/usr/bin/powertop --auto-tune
2842 RemainAfterExit=true
2843
2844 [Install]
2845 WantedBy=multi-user.target
2846 #+end_src
2847
2848 ** ranger
2849
2850 *** rc.conf
2851 :PROPERTIES:
2852 :header-args+: :tangle ~/.config/ranger/rc.conf
2853 :END:
2854
2855 #+begin_src conf :tangle no
2856 # ===================================================================
2857 # This file contains the default startup commands for ranger.
2858 # To change them, it is recommended to create the file
2859 # ~/.config/ranger/rc.conf and add your custom commands there.
2860 #
2861 # If you copy this whole file there, you may want to set the environment
2862 # variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
2863 #
2864 # The purpose of this file is mainly to define keybindings and settings.
2865 # For running more complex python code, please create a plugin in "plugins/" or
2866 # a command in "commands.py".
2867 #
2868 # Each line is a command that will be run before the user interface
2869 # is initialized. As a result, you can not use commands which rely
2870 # on the UI such as :delete or :mark.
2871 # ===================================================================
2872
2873 # ===================================================================
2874 # == Options
2875 # ===================================================================
2876
2877 # How many columns are there, and what are their relative widths?
2878 set column_ratios 1,3,4
2879
2880 # Which files should be hidden? (regular expression)
2881 set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
2882
2883 # Show hidden files? You can toggle this by typing 'zh'
2884 set show_hidden false
2885
2886 # Ask for a confirmation when running the "delete" command?
2887 # Valid values are "always" (default), "never", "multiple"
2888 # With "multiple", ranger will ask only if you delete multiple files at once.
2889 set confirm_on_delete multiple
2890
2891 # Which script is used to generate file previews?
2892 # ranger ships with scope.sh, a script that calls external programs (see
2893 # README for dependencies) to preview images, archives, etc.
2894 set preview_script ~/.config/ranger/scope.sh
2895
2896 # Use the external preview script or display simple plain text previews?
2897 set use_preview_script true
2898
2899 # Open all images in this directory when running certain image viewers
2900 # like feh or sxiv? You can still open selected files by marking them.
2901 set open_all_images true
2902
2903 # Be aware of version control systems and display information.
2904 set vcs_aware false
2905
2906 # State of the three backends git, hg, bzr. The possible states are
2907 # disabled, local (only show local info), enabled (show local and remote
2908 # information).
2909 set vcs_backend_git enabled
2910 set vcs_backend_hg disabled
2911 set vcs_backend_bzr disabled
2912
2913 # Preview images in full color with the external command "w3mimgpreview"?
2914 # This requires the console web browser "w3m" and a supported terminal.
2915 # It has been successfully tested with "xterm" and "urxvt" without tmux.
2916 set preview_images true
2917
2918 # Use a unicode "..." character to mark cut-off filenames?
2919 set unicode_ellipsis false
2920
2921 # Show dotfiles in the bookmark preview box?
2922 set show_hidden_bookmarks true
2923
2924 # Which colorscheme to use? These colorschemes are available by default:
2925 # default, jungle, snow
2926 set colorscheme default
2927
2928 # Preview files on the rightmost column?
2929 # And collapse (shrink) the last column if there is nothing to preview?
2930 set preview_files true
2931 set preview_directories true
2932 set collapse_preview true
2933
2934 # Save the console history on exit?
2935 set save_console_history true
2936
2937 # Draw the status bar on top of the browser window (default: bottom)
2938 set status_bar_on_top false
2939
2940 # Draw a progress bar in the status bar which displays the average state of all
2941 # currently running tasks which support progress bars?
2942 set draw_progress_bar_in_status_bar true
2943
2944 # Draw borders around columns?
2945 set draw_borders true
2946
2947 # Display the directory name in tabs?
2948 set dirname_in_tabs false
2949
2950 # Enable the mouse support?
2951 set mouse_enabled true
2952
2953 # Display the file size in the main column or status bar?
2954 set display_size_in_main_column true
2955 set display_size_in_status_bar true
2956
2957 # Display files tags in all columns or only in main column?
2958 set display_tags_in_all_columns true
2959
2960 # Set a title for the window?
2961 set update_title false
2962
2963 # Set the title to "ranger" in the tmux program?
2964 set update_tmux_title false
2965
2966 # Shorten the title if it gets long? The number defines how many
2967 # directories are displayed at once, 0 turns off this feature.
2968 set shorten_title 3
2969
2970 # Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
2971 set tilde_in_titlebar false
2972
2973 # How many directory-changes or console-commands should be kept in history?
2974 set max_history_size 20
2975 set max_console_history_size 50
2976
2977 # Try to keep so much space between the top/bottom border when scrolling:
2978 set scroll_offset 8
2979
2980 # Flush the input after each key hit? (Noticable when ranger lags)
2981 set flushinput true
2982
2983 # Padding on the right when there's no preview?
2984 # This allows you to click into the space to run the file.
2985 set padding_right true
2986
2987 # Save bookmarks (used with mX and `X) instantly?
2988 # This helps to synchronize bookmarks between multiple ranger
2989 # instances but leads to *slight* performance loss.
2990 # When false, bookmarks are saved when ranger is exited.
2991 set autosave_bookmarks true
2992
2993 # You can display the "real" cumulative size of directories by using the
2994 # command :get_cumulative_size or typing "dc". The size is expensive to
2995 # calculate and will not be updated automatically. You can choose
2996 # to update it automatically though by turning on this option:
2997 set autoupdate_cumulative_size false
2998
2999 # Turning this on makes sense for screen readers:
3000 set show_cursor false
3001
3002 # One of: size, basename, mtime, type
3003 set sort natural
3004
3005 # Additional sorting options
3006 set sort_reverse false
3007 set sort_case_insensitive true
3008 set sort_directories_first true
3009
3010 # Enable this if key combinations with the Alt Key don't work for you.
3011 # (Especially on xterm)
3012 set xterm_alt_key false
3013
3014 # ===================================================================
3015 # == Local Options
3016 # ===================================================================
3017 # You can set local options that only affect a single directory.
3018
3019 # Examples:
3020 # setlocal path=~/downloads sort mtime
3021
3022 # ===================================================================
3023 # == Command Aliases in the Console
3024 # ===================================================================
3025
3026 alias e edit
3027 alias q quit
3028 alias q! quitall
3029 alias qall quitall
3030 alias setl setlocal
3031
3032 alias filter scout -prt
3033 alias find scout -aet
3034 alias mark scout -mr
3035 alias unmark scout -Mr
3036 alias search scout -rs
3037 alias search_inc scout -rts
3038 alias travel scout -aefiklst
3039
3040 # ===================================================================
3041 # == Define keys for the browser
3042 # ===================================================================
3043
3044 # Basic
3045 map Q quit!
3046 map q quit
3047 copymap q ZZ ZQ
3048
3049 map R reload_cwd
3050 map <C-r> reset
3051 map <C-l> redraw_window
3052 map <C-c> abort
3053 map <esc> change_mode normal
3054
3055 map i display_file
3056 map ? help
3057 map W display_log
3058 map w taskview_open
3059 map S shell $SHELL
3060
3061 map : console
3062 map ; console
3063 map ! console shell
3064 map @ console -p6 shell %%s
3065 map # console shell -p
3066 map s console shell
3067 map r chain draw_possible_programs; console open_with
3068 map f console find
3069 map cd console cd
3070
3071 # Tagging / Marking
3072 map t tag_toggle
3073 map ut tag_remove
3074 map "<any> tag_toggle tag=%any
3075 map <Space> mark_files toggle=True
3076 map v mark_files all=True toggle=True
3077 map uv mark_files all=True val=False
3078 map V toggle_visual_mode
3079 map uV toggle_visual_mode reverse=True
3080
3081 # For the nostalgics: Midnight Commander bindings
3082 map <F1> help
3083 map <F3> display_file
3084 map <F4> edit
3085 map <F5> copy
3086 map <F6> cut
3087 map <F7> console mkdir
3088 map <F8> console delete
3089 map <F10> exit
3090
3091 # In case you work on a keyboard with dvorak layout
3092 map <UP> move up=1
3093 map <DOWN> move down=1
3094 map <LEFT> move left=1
3095 map <RIGHT> move right=1
3096 map <HOME> move to=0
3097 map <END> move to=-1
3098 map <PAGEDOWN> move down=1 pages=True
3099 map <PAGEUP> move up=1 pages=True
3100 map <CR> move right=1
3101 map <DELETE> console delete
3102 map <INSERT> console touch
3103
3104 # VIM-like
3105 copymap <UP> k
3106 copymap <DOWN> j
3107 copymap <LEFT> h
3108 copymap <RIGHT> l
3109 copymap <HOME> gg
3110 copymap <END> G
3111 copymap <PAGEDOWN> <C-F>
3112 copymap <PAGEUP> <C-B>
3113
3114 map J move down=0.5 pages=True
3115 map K move up=0.5 pages=True
3116 copymap J <C-D>
3117 copymap K <C-U>
3118
3119 # Jumping around
3120 map H history_go -1
3121 map L history_go 1
3122 map ] move_parent 1
3123 map [ move_parent -1
3124 map } traverse
3125
3126 map gh cd ~
3127 map ge cd /etc
3128 map gu cd /usr
3129 map gd cd /dev
3130 map gl cd -r .
3131 map gL cd -r %f
3132 map go cd /opt
3133 map gv cd /var
3134 map gm cd /media
3135 map gM cd /mnt
3136 map gs cd /srv
3137 map gr cd /
3138 map gR eval fm.cd(ranger.RANGERDIR)
3139 map g/ cd /
3140 map g? cd /usr/share/doc/ranger
3141
3142 # External Programs
3143 map E edit
3144 map du shell -p du --max-depth=1 -h --apparent-size
3145 map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
3146 map yp shell -d echo -n %d/%f | xsel -i
3147 map yd shell -d echo -n %d | xsel -i
3148 map yn shell -d echo -n %f | xsel -i
3149
3150 # Filesystem Operations
3151 map = chmod
3152
3153 map cw console rename
3154 map A eval fm.open_console('rename ' + fm.thisfile.basename)
3155 map I eval fm.open_console('rename ' + fm.thisfile.basename, position=7)
3156
3157 map pp paste
3158 map po paste overwrite=True
3159 map pl paste_symlink relative=False
3160 map pL paste_symlink relative=True
3161 map phl paste_hardlink
3162 map pht paste_hardlinked_subtree
3163
3164 map dd cut
3165 map ud uncut
3166 map da cut mode=add
3167 map dr cut mode=remove
3168
3169 map yy copy
3170 map uy uncut
3171 map ya copy mode=add
3172 map yr copy mode=remove
3173
3174 # Temporary workarounds
3175 map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
3176 map dG eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
3177 map dj eval fm.cut(dirarg=dict(down=1), narg=quantifier)
3178 map dk eval fm.cut(dirarg=dict(up=1), narg=quantifier)
3179 map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
3180 map yG eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
3181 map yj eval fm.copy(dirarg=dict(down=1), narg=quantifier)
3182 map yk eval fm.copy(dirarg=dict(up=1), narg=quantifier)
3183
3184 # Searching
3185 map / console search
3186 map n search_next
3187 map N search_next forward=False
3188 map ct search_next order=tag
3189 map cs search_next order=size
3190 map ci search_next order=mimetype
3191 map cc search_next order=ctime
3192 map cm search_next order=mtime
3193 map ca search_next order=atime
3194
3195 # Tabs
3196 map <C-n> tab_new ~
3197 map <C-w> tab_close
3198 map <TAB> tab_move 1
3199 map <S-TAB> tab_move -1
3200 map <A-Right> tab_move 1
3201 map <A-Left> tab_move -1
3202 map gt tab_move 1
3203 map gT tab_move -1
3204 map gn tab_new ~
3205 map gc tab_close
3206 map uq tab_restore
3207 map <a-1> tab_open 1
3208 map <a-2> tab_open 2
3209 map <a-3> tab_open 3
3210 map <a-4> tab_open 4
3211 map <a-5> tab_open 5
3212 map <a-6> tab_open 6
3213 map <a-7> tab_open 7
3214 map <a-8> tab_open 8
3215 map <a-9> tab_open 9
3216
3217 # Sorting
3218 map or toggle_option sort_reverse
3219 map os chain set sort=size; set sort_reverse=False
3220 map ob chain set sort=basename; set sort_reverse=False
3221 map on chain set sort=natural; set sort_reverse=False
3222 map om chain set sort=mtime; set sort_reverse=False
3223 map oc chain set sort=ctime; set sort_reverse=False
3224 map oa chain set sort=atime; set sort_reverse=False
3225 map ot chain set sort=type; set sort_reverse=False
3226
3227 map oS chain set sort=size; set sort_reverse=True
3228 map oB chain set sort=basename; set sort_reverse=True
3229 map oN chain set sort=natural; set sort_reverse=True
3230 map oM chain set sort=mtime; set sort_reverse=True
3231 map oC chain set sort=ctime; set sort_reverse=True
3232 map oA chain set sort=atime; set sort_reverse=True
3233 map oT chain set sort=type; set sort_reverse=True
3234
3235 map dc get_cumulative_size
3236
3237 # Settings
3238 map zc toggle_option collapse_preview
3239 map zd toggle_option sort_directories_first
3240 map zh toggle_option show_hidden
3241 map <C-h> toggle_option show_hidden
3242 map zi toggle_option flushinput
3243 map zm toggle_option mouse_enabled
3244 map zp toggle_option preview_files
3245 map zP toggle_option preview_directories
3246 map zs toggle_option sort_case_insensitive
3247 map zu toggle_option autoupdate_cumulative_size
3248 map zv toggle_option use_preview_script
3249 map zf console filter
3250
3251 # Bookmarks
3252 map `<any> enter_bookmark %any
3253 map '<any> enter_bookmark %any
3254 map m<any> set_bookmark %any
3255 map um<any> unset_bookmark %any
3256
3257 map m<bg> draw_bookmarks
3258 copymap m<bg> um<bg> `<bg> '<bg>
3259
3260 # Generate all the chmod bindings with some python help:
3261 eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
3262 eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
3263 eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
3264 eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
3265 eval for arg in "rwxXst": cmd("map +{0} shell -d chmod u+{0} %s".format(arg))
3266
3267 eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
3268 eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
3269 eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
3270 eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
3271 eval for arg in "rwxXst": cmd("map -{0} shell -d chmod u-{0} %s".format(arg))
3272
3273 # ===================================================================
3274 # == Define keys for the console
3275 # ===================================================================
3276 # Note: Unmapped keys are passed directly to the console.
3277
3278 # Basic
3279 cmap <tab> eval fm.ui.console.tab()
3280 cmap <s-tab> eval fm.ui.console.tab(-1)
3281 cmap <ESC> eval fm.ui.console.close()
3282 cmap <CR> eval fm.ui.console.execute()
3283 cmap <C-l> redraw_window
3284
3285 copycmap <ESC> <C-c>
3286 copycmap <CR> <C-j>
3287
3288 # Move around
3289 cmap <up> eval fm.ui.console.history_move(-1)
3290 cmap <down> eval fm.ui.console.history_move(1)
3291 cmap <left> eval fm.ui.console.move(left=1)
3292 cmap <right> eval fm.ui.console.move(right=1)
3293 cmap <home> eval fm.ui.console.move(right=0, absolute=True)
3294 cmap <end> eval fm.ui.console.move(right=-1, absolute=True)
3295
3296 # Line Editing
3297 cmap <backspace> eval fm.ui.console.delete(-1)
3298 cmap <delete> eval fm.ui.console.delete(0)
3299 cmap <C-w> eval fm.ui.console.delete_word()
3300 cmap <C-k> eval fm.ui.console.delete_rest(1)
3301 cmap <C-u> eval fm.ui.console.delete_rest(-1)
3302 cmap <C-y> eval fm.ui.console.paste()
3303
3304 # And of course the emacs way
3305 copycmap <up> <C-p>
3306 copycmap <down> <C-n>
3307 copycmap <left> <C-b>
3308 copycmap <right> <C-f>
3309 copycmap <home> <C-a>
3310 copycmap <end> <C-e>
3311 copycmap <delete> <C-d>
3312 copycmap <backspace> <C-h>
3313
3314 # Note: There are multiple ways to express backspaces. <backspace> (code 263)
3315 # and <backspace2> (code 127). To be sure, use both.
3316 copycmap <backspace> <backspace2>
3317
3318 # This special expression allows typing in numerals:
3319 cmap <allow_quantifiers> false
3320
3321 # ===================================================================
3322 # == Pager Keybindings
3323 # ===================================================================
3324
3325 # Movement
3326 pmap <down> pager_move down=1
3327 pmap <up> pager_move up=1
3328 pmap <left> pager_move left=4
3329 pmap <right> pager_move right=4
3330 pmap <home> pager_move to=0
3331 pmap <end> pager_move to=-1
3332 pmap <pagedown> pager_move down=1.0 pages=True
3333 pmap <pageup> pager_move up=1.0 pages=True
3334 pmap <C-d> pager_move down=0.5 pages=True
3335 pmap <C-u> pager_move up=0.5 pages=True
3336
3337 copypmap <UP> k <C-p>
3338 copypmap <DOWN> j <C-n> <CR>
3339 copypmap <LEFT> h
3340 copypmap <RIGHT> l
3341 copypmap <HOME> g
3342 copypmap <END> G
3343 copypmap <C-d> d
3344 copypmap <C-u> u
3345 copypmap <PAGEDOWN> n f <C-F> <Space>
3346 copypmap <PAGEUP> p b <C-B>
3347
3348 # Basic
3349 pmap <ESC> pager_close
3350 copypmap <ESC> q Q i <F3>
3351 pmap E edit_file
3352
3353 # ===================================================================
3354 # == Taskview Keybindings
3355 # ===================================================================
3356
3357 # Movement
3358 tmap <up> taskview_move up=1
3359 tmap <down> taskview_move down=1
3360 tmap <home> taskview_move to=0
3361 tmap <end> taskview_move to=-1
3362 tmap <pagedown> taskview_move down=1.0 pages=True
3363 tmap <pageup> taskview_move up=1.0 pages=True
3364 tmap <C-d> taskview_move down=0.5 pages=True
3365 tmap <C-u> taskview_move up=0.5 pages=True
3366
3367 copytmap <UP> k <C-p>
3368 copytmap <DOWN> j <C-n> <CR>
3369 copytmap <HOME> g
3370 copytmap <END> G
3371 copytmap <C-u> u
3372 copytmap <PAGEDOWN> n f <C-F> <Space>
3373 copytmap <PAGEUP> p b <C-B>
3374
3375 # Changing priority and deleting tasks
3376 tmap J eval -q fm.ui.taskview.task_move(-1)
3377 tmap K eval -q fm.ui.taskview.task_move(0)
3378 tmap dd eval -q fm.ui.taskview.task_remove()
3379 tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
3380 tmap <pageup> eval -q fm.ui.taskview.task_move(0)
3381 tmap <delete> eval -q fm.ui.taskview.task_remove()
3382
3383 # Basic
3384 tmap <ESC> taskview_close
3385 copytmap <ESC> q Q w <C-c>
3386 #+end_src
3387
3388 *** scope.sh
3389 :PROPERTIES:
3390 :header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
3391 :END:
3392
3393 #+begin_src sh :tangle no
3394 # ranger supports enhanced previews. If the option "use_preview_script"
3395 # is set to True and this file exists, this script will be called and its
3396 # output is displayed in ranger. ANSI color codes are supported.
3397
3398 # NOTES: This script is considered a configuration file. If you upgrade
3399 # ranger, it will be left untouched. (You must update it yourself.)
3400 # Also, ranger disables STDIN here, so interactive scripts won't work properly
3401
3402 # Meanings of exit codes:
3403 # code | meaning | action of ranger
3404 # -----+------------+-------------------------------------------
3405 # 0 | success | success. display stdout as preview
3406 # 1 | no preview | failure. display no preview at all
3407 # 2 | plain text | display the plain content of the file
3408 # 3 | fix width | success. Don't reload when width changes
3409 # 4 | fix height | success. Don't reload when height changes
3410 # 5 | fix both | success. Don't ever reload
3411
3412 # Meaningful aliases for arguments:
3413 path="$1" # Full path of the selected file
3414 width="$2" # Width of the preview pane (number of fitting characters)
3415 height="$3" # Height of the preview pane (number of fitting characters)
3416
3417 maxln=200 # Stop after $maxln lines. Can be used like ls | head -n $maxln
3418
3419 # Find out something about the file:
3420 mimetype=$(file --mime-type -Lb "$path")
3421 extension=${path##*.}
3422
3423 # Functions:
3424 # runs a command and saves its output into $output. Useful if you need
3425 # the return value AND want to use the output in a pipe
3426 try() { output=$(eval '"$@"'); }
3427
3428 # writes the output of the previouosly used "try" command
3429 dump() { echo "$output"; }
3430
3431 # a common post-processing function used after most commands
3432 trim() { head -n "$maxln"; }
3433
3434 # wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
3435 highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }
3436
3437 case "$extension" in
3438 # Archive extensions:
3439 7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
3440 rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
3441 try als "$path" && { dump | trim; exit 0; }
3442 try acat "$path" && { dump | trim; exit 3; }
3443 try bsdtar -lf "$path" && { dump | trim; exit 0; }
3444 exit 1;;
3445 rar)
3446 try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
3447 # PDF documents:
3448 pdf)
3449 try pdftotext -l 10 -nopgbrk -q "$path" - && \
3450 { dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
3451 # BitTorrent Files
3452 torrent)
3453 try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
3454 # HTML Pages:
3455 htm|html|xhtml)
3456 try w3m -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3457 try lynx -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3458 try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3459 ;; # fall back to highlight/cat if the text browsers fail
3460 esac
3461
3462 case "$mimetype" in
3463 # Syntax highlight for text files:
3464 text/* | */xml)
3465 try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
3466 # Ascii-previews of images:
3467 image/*)
3468 img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
3469 # Display information about media files:
3470 video/* | audio/*)
3471 exiftool "$path" && exit 5
3472 # Use sed to remove spaces so the output fits into the narrow window
3473 try mediainfo "$path" && { dump | trim | sed 's/ \+:/: /;'; exit 5; } || exit 1;;
3474 esac
3475
3476 exit 1
3477 #+end_src
3478
3479 ** redshift
3480 :PROPERTIES:
3481 :header-args+: :tangle ~/.config/redshift.conf :comments none
3482 :END:
3483
3484 #+begin_src conf
3485 ; Global settings for redshift
3486 [redshift]
3487 ; Set the day and night screen temperatures (Neutral is 6500K)
3488 ;temp-day=5700
3489 ;temp-night=3500
3490
3491 ;temp-day=6500
3492 temp-day=6200
3493 ;temp-night=4800
3494 ;temp-night=5000
3495 ;temp-night=4500
3496 temp-night=4000
3497
3498 ; Enable/Disable a smooth transition between day and night
3499 ; 0 will cause a direct change from day to night screen temperature.
3500 ; 1 will gradually increase or decrease the screen temperature.
3501 transition=1
3502
3503 ; Set the screen brightness. Default is 1.0.
3504 ;brightness=0.9
3505 ; It is also possible to use different settings for day and night
3506 ; since version 1.8.
3507 ;brightness-day=0.7
3508 ;brightness-night=0.4
3509 ; Set the screen gamma (for all colors, or each color channel
3510 ; individually)
3511 ;gamma=0.8
3512 ;gamma=1.0
3513 ;gamma=0.8:0.7:0.8
3514 ; This can also be set individually for day and night since
3515 ; version 1.10.
3516 ;gamma-day=0.8:0.7:0.8
3517 ;gamma-night=0.6
3518
3519 ; Set the location-provider: 'geoclue2' or 'manual'
3520 ; type 'redshift -l list' to see possible values.
3521 ; The location provider settings are in a different section.
3522 ;location-provider=manual
3523 location-provider=geoclue2
3524
3525 ; Set the adjustment-method: 'randr', 'vidmode'
3526 ; type 'redshift -m list' to see all possible values.
3527 ; 'randr' is the preferred method, 'vidmode' is an older API.
3528 ; but works in some cases when 'randr' does not.
3529 ; The adjustment method settings are in a different section.
3530 adjustment-method=randr
3531
3532 ; Configuration of the location-provider:
3533 ; type 'redshift -l PROVIDER:help' to see the settings.
3534 ; ex: 'redshift -l manual:help'
3535 ; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
3536 ; are negative numbers.
3537 ;[manual]
3538 ;lat=48.1
3539 ;lon=11.6
3540
3541 ; Configuration of the adjustment-method
3542 ; type 'redshift -m METHOD:help' to see the settings.
3543 ; ex: 'redshift -m randr:help'
3544 ; In this example, randr is configured to adjust screen 1.
3545 ; Note that the numbering starts from 0, so this is actually the
3546 ; second screen. If this option is not specified, Redshift will try
3547 ; to adjust _all_ screens.
3548 ;[randr]
3549 ;screen=1
3550 #+end_src
3551
3552 ** rofi
3553 :PROPERTIES:
3554 :header-args+: :tangle ~/.config/rofi/config
3555 :END:
3556
3557 #+begin_src conf
3558 rofi.font: Ubuntu Mono 13
3559 ! rofi.font: Inconsolata 16
3560 ! rofi.font: Iosevka 13
3561 ! rofi.font: Source Code Pro 11
3562 rofi.modi: run,window
3563 ! rofi.width: 640
3564 rofi.width: 600
3565 !rofi.location: 2
3566 !rofi.yoffset: 200
3567 rofi.monitor: -1
3568 !rofi.lines: 10
3569
3570 !rofi.theme: /usr/share/rofi/themes//Arc.rasi
3571 !rofi.theme: /usr/share/rofi/themes//Paper.rasi
3572 !rofi.theme: /usr/share/rofi/themes//sidebar.rasi
3573
3574 rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
3575 #+end_src
3576
3577 ** rofi-pass
3578 :PROPERTIES:
3579 :header-args+: :tangle ~/.config/rofi-pass/config
3580 :END:
3581
3582 #+begin_src conf
3583 # permanently set alternative root dir
3584 # root=/path/to/root
3585
3586 # rofi command. Make sure to have "$@" as last argument
3587 _rofi () {
3588 #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
3589 rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
3590 }
3591
3592 # xdotool needs the keyboard layout to be set using setxkbmap
3593 # You can do this in your autostart scripts (e.g. xinitrc)
3594
3595 # If for some reason, you cannot do this, you can set the command here.
3596 # and set fix_layout to true
3597 fix_layout=false
3598
3599 layout_cmd () {
3600 setxkbmap us
3601 }
3602
3603 # fields to be used
3604 URL_field='url'
3605 USERNAME_field='user'
3606 AUTOTYPE_field='autotype'
3607
3608 # delay to be used for :delay keyword
3609 delay=2
3610
3611 ## Programs to be used
3612 # Editor
3613 EDITOR='gvim -f'
3614
3615 # Browser
3616 BROWSER='chromium'
3617
3618 ## Misc settings
3619
3620 default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
3621 auto_enter='false'
3622 notify='false'
3623 default_autotype='user :tab pass'
3624
3625 # color of the help messages
3626 # leave empty for autodetection
3627 help_color="#4872FF"
3628
3629 # Clipboard settings
3630 # Possible options: primary, clipboard, both
3631 clip=primary
3632
3633 # Options for generating new password entries
3634 # default_user is also used for password files that have no user field.
3635 default_user=aminb
3636 default_user2=aminban
3637 password_length=30
3638
3639 # Custom Keybindings
3640 #autotype="Alt+1"
3641 autotype="Alt+m"
3642 type_user="Alt+2"
3643 type_pass="Alt+3"
3644 open_url="Alt+4"
3645 copy_name="Alt+u"
3646 copy_url="Alt+l"
3647 copy_pass="Alt+p"
3648 show="Alt+o"
3649 copy_entry="Alt+2"
3650 type_entry="Alt+1"
3651 copy_menu="Alt+c"
3652 action_menu="Alt+a"
3653 type_menu="Alt+t"
3654 help="Alt+h"
3655 switch="Alt+x"
3656 insert_pass="Alt+n"
3657 #+end_src
3658
3659 ** sway
3660 :PROPERTIES:
3661 :header-args+: :tangle ~/.config/sway/config
3662 :END:
3663
3664 #+begin_src conf
3665 exec xrdb .Xresources
3666 ### Variables
3667 # super
3668 set $mod Mod4
3669 # alt
3670 set $mod2 Mod1
3671 set $left h
3672 set $down j
3673 set $up k
3674 set $right l
3675 set $term urxvt
3676 set $menu rofi -show run -display-run '> ' -display-window ' 🗔 '
3677
3678 ### Output configuration
3679 #
3680 # Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/)
3681 output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
3682 #
3683 # Example configuration:
3684 #
3685 # output HDMI-A-1 resolution 1920x1080 position 1920,0
3686 #
3687 # You can get the names of your outputs by running: swaymsg -t get_outputs
3688
3689 ### Idle configuration
3690 #
3691 # Example configuration:
3692 #
3693 #exec swayidle \
3694 # timeout 300 'swaylock -c 000000' \
3695 # timeout 600 'swaymsg "output * dpms off"' \
3696 # resume 'swaymsg "output * dpms on"' \
3697 # before-sleep 'swaylock -c 000000'
3698 #
3699 # This will lock your screen after 300 seconds of inactivity, then turn off
3700 # your displays after another 600 seconds, and turn your screens back on when
3701 # resumed. It will also lock your screen before your computer goes to sleep.
3702
3703 ### Input configuration
3704
3705 input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
3706 dwt enabled
3707 tap enabled
3708 natural_scroll enabled
3709 middle_emulation enabled
3710 click_method clickfinger
3711 }
3712
3713 input "1:1:AT_Translated_Set_2_keyboard" {
3714 repeat_delay 200
3715 repeat_rate 45
3716 xkb_layout us,ir
3717 xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
3718 }
3719
3720
3721 ### Key bindings
3722 #
3723 # Basics:
3724 #
3725 # start a terminal
3726 bindsym $mod+Return exec $term
3727
3728 # kill focused window
3729 bindsym $mod+Shift+q kill
3730
3731 # start your launcher
3732 bindsym $mod+d exec $menu
3733
3734 # Drag floating windows by holding down $mod and left mouse button.
3735 # Resize them with right mouse button + $mod.
3736 # Despite the name, also works for non-floating windows.
3737 # Change normal to inverse to use left mouse button for resizing and right
3738 # mouse button for dragging.
3739 #floating_modifier $mod normal
3740
3741 # reload the configuration file
3742 bindsym $mod+Shift+c reload
3743
3744 # exit sway (logs you out of your wayland session)
3745 bindsym $mod+Shift+e exit
3746
3747 bindsym $mod+apostrophe exec rofi-light # rofi-based brightness chooser
3748 bindsym XF86MonBrightnessUp exec light -A 5 # increase screen brightness
3749 bindsym XF86MonBrightnessDown exec light -U 5 # decrease screen brightness
3750
3751 # bspwm-esque workspace switch and window move
3752 bindsym $mod+bracketleft exec sway-ws-util switch prev
3753 bindsym $mod+bracketright exec sway-ws-util switch next
3754 bindsym $mod+braceleft exec sway-ws-util move prev follow
3755 bindsym $mod+braceright exec sway-ws-util move next follow
3756
3757 # original sway workspace switch and window move
3758 bindsym $mod2+bracketleft workspace prev
3759 bindsym $mod2+bracketright workspace next
3760 bindsym $mod2+braceleft move container to workspace prev
3761 bindsym $mod2+braceright move container to workspace next
3762 #
3763 # Moving around:
3764 #
3765 # Move your focus around
3766 bindsym $mod+$left focus left
3767 bindsym $mod+$down focus down
3768 bindsym $mod+$up focus up
3769 bindsym $mod+$right focus right
3770 # or use $mod+[up|down|left|right]
3771 bindsym $mod+Left focus left
3772 bindsym $mod+Down focus down
3773 bindsym $mod+Up focus up
3774 bindsym $mod+Right focus right
3775
3776 # _move_ the focused window with the same, but add Shift
3777 bindsym $mod+Shift+$left move left
3778 bindsym $mod+Shift+$down move down
3779 bindsym $mod+Shift+$up move up
3780 bindsym $mod+Shift+$right move right
3781 # ditto, with arrow keys
3782 bindsym $mod+Shift+Left move left
3783 bindsym $mod+Shift+Down move down
3784 bindsym $mod+Shift+Up move up
3785 bindsym $mod+Shift+Right move right
3786 #
3787 # Workspaces:
3788 #
3789 # switch to workspace
3790 bindsym $mod+1 workspace 1
3791 bindsym $mod+2 workspace 2
3792 bindsym $mod+3 workspace 3
3793 bindsym $mod+4 workspace 4
3794 bindsym $mod+5 workspace 5
3795 bindsym $mod+6 workspace 6
3796 bindsym $mod+7 workspace 7
3797 bindsym $mod+8 workspace 8
3798 bindsym $mod+9 workspace 9
3799 bindsym $mod+0 workspace 10
3800 # move focused container to workspace
3801 bindsym $mod+Shift+1 move container to workspace 1
3802 bindsym $mod+Shift+2 move container to workspace 2
3803 bindsym $mod+Shift+3 move container to workspace 3
3804 bindsym $mod+Shift+4 move container to workspace 4
3805 bindsym $mod+Shift+5 move container to workspace 5
3806 bindsym $mod+Shift+6 move container to workspace 6
3807 bindsym $mod+Shift+7 move container to workspace 7
3808 bindsym $mod+Shift+8 move container to workspace 8
3809 bindsym $mod+Shift+9 move container to workspace 9
3810 bindsym $mod+Shift+0 move container to workspace 10
3811 # Note: workspaces can have any name you want, not just numbers.
3812 # We just use 1-10 as the default.
3813 #
3814 # Layout stuff:
3815 #
3816 # You can "split" the current object of your focus with
3817 # $mod+b or $mod+v, for horizontal and vertical splits
3818 # respectively.
3819 bindsym $mod+b splith
3820 bindsym $mod+v splitv
3821
3822 # Switch the current container between different layout styles
3823 bindsym $mod+s layout stacking
3824 bindsym $mod+w layout tabbed
3825 bindsym $mod+e layout toggle split
3826
3827 # Make the current focus fullscreen
3828 bindsym $mod+f fullscreen
3829
3830 # Toggle the current focus between tiling and floating mode
3831 bindsym $mod+Shift+space floating toggle
3832
3833 # Swap focus between the tiling area and the floating area
3834 bindsym $mod+space focus mode_toggle
3835
3836 # move focus to the parent container
3837 bindsym $mod+a focus parent
3838 #
3839 # Scratchpad:
3840 #
3841 # Sway has a "scratchpad", which is a bag of holding for windows.
3842 # You can send windows there and get them back later.
3843
3844 # Move the currently focused window to the scratchpad
3845 bindsym $mod+Shift+minus move scratchpad
3846
3847 # Show the next scratchpad window or hide the focused scratchpad window.
3848 # If there are multiple scratchpad windows, this command cycles through them.
3849 bindsym $mod+minus scratchpad show
3850 #
3851 # Resizing containers:
3852 #
3853 mode "resize" {
3854 # left will shrink the containers width
3855 # right will grow the containers width
3856 # up will shrink the containers height
3857 # down will grow the containers height
3858 bindsym $left resize shrink width 10px
3859 bindsym $down resize grow height 10px
3860 bindsym $up resize shrink height 10px
3861 bindsym $right resize grow width 10px
3862
3863 # ditto, with arrow keys
3864 bindsym Left resize shrink width 10px
3865 bindsym Down resize grow height 10px
3866 bindsym Up resize shrink height 10px
3867 bindsym Right resize grow width 10px
3868
3869 # return to default mode
3870 bindsym Return mode "default"
3871 bindsym Escape mode "default"
3872 }
3873 bindsym $mod+Shift+r mode "resize"
3874
3875 #
3876 # Status Bar:
3877 #
3878 # Read `man 5 sway-bar` for more information about this section.
3879 bar {
3880 position bottom
3881 colors {
3882 statusline #ffffff
3883 background #323232
3884 inactive_workspace #32323200 #32323200 #5c5c5c
3885 }
3886 status_command i3gs ~/.config/i3gs/config
3887 }
3888
3889 include /etc/sway/config.d/*
3890 #+end_src
3891
3892 ** TLP
3893
3894 *** TODO enigma
3895 *** plasma
3896
3897 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/default/tlp")
3898 # ------------------------------------------------------------------------------
3899 # tlp - Parameters for power saving
3900 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
3901
3902 # Hint: some features are disabled by default, remove the leading # to enable
3903 # them.
3904
3905 # Set to 0 to disable, 1 to enable TLP.
3906 TLP_ENABLE=1
3907
3908 # Operation mode when no power supply can be detected: AC, BAT.
3909 # Concerns some desktop and embedded hardware only.
3910 TLP_DEFAULT_MODE=AC
3911
3912 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
3913 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
3914 TLP_PERSISTENT_DEFAULT=0
3915
3916 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
3917 # Non-zero value enables, zero disables laptop mode.
3918 DISK_IDLE_SECS_ON_AC=0
3919 DISK_IDLE_SECS_ON_BAT=2
3920
3921 # Dirty page values (timeouts in secs).
3922 MAX_LOST_WORK_SECS_ON_AC=15
3923 MAX_LOST_WORK_SECS_ON_BAT=60
3924
3925 # Hint: CPU parameters below are disabled by default, remove the leading #
3926 # to enable them, otherwise kernel default values are used.
3927
3928 # Select a CPU frequency scaling governor.
3929 # Intel Core i processor with intel_pstate driver:
3930 # powersave(*), performance.
3931 # Older hardware with acpi-cpufreq driver:
3932 # ondemand(*), powersave, performance, conservative, schedutil.
3933 # (*) is recommended.
3934 # Hint: use tlp-stat -p to show the active driver and available governors.
3935 # Important:
3936 # powersave for intel_pstate and ondemand for acpi-cpufreq are power
3937 # efficient for *almost all* workloads and therefore kernel and most
3938 # distributions have chosen them as defaults. If you still want to change,
3939 # you should know what you're doing! You *must* disable your distribution's
3940 # governor settings or conflicts will occur.
3941 #CPU_SCALING_GOVERNOR_ON_AC=powersave
3942 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
3943
3944 # Set the min/max frequency available for the scaling governor.
3945 # Possible values strongly depend on your CPU. For available frequencies see
3946 # the output of tlp-stat -p.
3947 #CPU_SCALING_MIN_FREQ_ON_AC=0
3948 #CPU_SCALING_MAX_FREQ_ON_AC=0
3949 #CPU_SCALING_MIN_FREQ_ON_BAT=0
3950 #CPU_SCALING_MAX_FREQ_ON_BAT=0
3951
3952 # Set energy performance hints (HWP) for Intel P-state governor:
3953 # performance, balance_performance, default, balance_power, power
3954 # Values are given in order of increasing power saving.
3955 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
3956 CPU_HWP_ON_AC=balance_performance
3957 CPU_HWP_ON_BAT=balance_power
3958
3959 # Set Intel P-state performance: 0..100 (%).
3960 # Limit the max/min P-state to control the power dissipation of the CPU.
3961 # Values are stated as a percentage of the available performance.
3962 # Requires an Intel Core i processor with intel_pstate driver.
3963 #CPU_MIN_PERF_ON_AC=0
3964 #CPU_MAX_PERF_ON_AC=100
3965 #CPU_MIN_PERF_ON_BAT=0
3966 #CPU_MAX_PERF_ON_BAT=30
3967
3968 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
3969 # Requires an Intel Core i processor.
3970 # Important:
3971 # - This may conflict with your distribution's governor settings
3972 # - A value of 1 does *not* activate boosting, it just allows it
3973 #CPU_BOOST_ON_AC=1
3974 #CPU_BOOST_ON_BAT=0
3975
3976 # Minimize number of used CPU cores/hyper-threads under light load conditions:
3977 # 0=disable, 1=enable.
3978 SCHED_POWERSAVE_ON_AC=0
3979 SCHED_POWERSAVE_ON_BAT=1
3980
3981 # Kernel NMI Watchdog:
3982 # 0=disable (default, saves power), 1=enable (for kernel debugging only).
3983 NMI_WATCHDOG=0
3984
3985 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
3986 # Frequency voltage pairs are written to:
3987 # /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
3988 # CAUTION: only use this, if you thoroughly understand what you are doing!
3989 #PHC_CONTROLS="F:V F:V F:V F:V"
3990
3991 # Set CPU performance versus energy savings policy:
3992 # performance, balance-performance, default, balance-power, power.
3993 # Values are given in order of increasing power saving.
3994 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
3995 ENERGY_PERF_POLICY_ON_AC=performance
3996 ENERGY_PERF_POLICY_ON_BAT=balance-power
3997
3998 # Disk devices; separate multiple devices with spaces (default: sda).
3999 # Devices can be specified by disk ID also (lookup with: tlp diskid).
4000 DISK_DEVICES="sda sdb"
4001
4002 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
4003 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
4004 # Separate values for multiple disks with spaces. Use the special value 'keep'
4005 # to keep the hardware default for the particular disk.
4006 DISK_APM_LEVEL_ON_AC="254 254"
4007 DISK_APM_LEVEL_ON_BAT="128 128"
4008
4009 # Hard disk spin down timeout:
4010 # 0: spin down disabled
4011 # 1..240: timeouts from 5s to 20min (in units of 5s)
4012 # 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
4013 # See 'man hdparm' for details.
4014 # Separate values for multiple disks with spaces. Use the special value 'keep'
4015 # to keep the hardware default for the particular disk.
4016 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
4017 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
4018
4019 # Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
4020 # Separate values for multiple disks with spaces. Use the special value 'keep'
4021 # to keep the kernel default scheduler for the particular disk.
4022 #DISK_IOSCHED="cfq cfq"
4023
4024 # AHCI link power management (ALPM) for disk devices:
4025 # min_power, med_power_with_dipm(*), medium_power, max_performance.
4026 # (*) Kernel >= 4.15 required, then recommended.
4027 # Multiple values separated with spaces are tried sequentially until success.
4028 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
4029 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
4030
4031 # Exclude host devices from AHCI link power management.
4032 # Separate multiple hosts with spaces.
4033 #SATA_LINKPWR_BLACKLIST="host1"
4034
4035 # Runtime Power Management for AHCI host and disks devices:
4036 # on=disable, auto=enable.
4037 # EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
4038 #AHCI_RUNTIME_PM_ON_AC=on
4039 #AHCI_RUNTIME_PM_ON_BAT=on
4040
4041 # Seconds of inactivity before disk is suspended.
4042 AHCI_RUNTIME_PM_TIMEOUT=15
4043
4044 # PCI Express Active State Power Management (PCIe ASPM):
4045 # default, performance, powersave.
4046 PCIE_ASPM_ON_AC=performance
4047 PCIE_ASPM_ON_BAT=powersave
4048
4049 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
4050 # auto = mid on BAT, high on AC; default = use hardware defaults.
4051 RADEON_POWER_PROFILE_ON_AC=high
4052 RADEON_POWER_PROFILE_ON_BAT=low
4053
4054 # Radeon dynamic power management method (DPM): battery, performance.
4055 RADEON_DPM_STATE_ON_AC=performance
4056 RADEON_DPM_STATE_ON_BAT=battery
4057
4058 # Radeon DPM performance level: auto, low, high; auto is recommended.
4059 RADEON_DPM_PERF_LEVEL_ON_AC=auto
4060 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4061
4062 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4063 WIFI_PWR_ON_AC=off
4064 WIFI_PWR_ON_BAT=on
4065
4066 # Disable wake on LAN: Y/N.
4067 WOL_DISABLE=Y
4068
4069 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4070 # A value of 0 disables, >=1 enables power saving (recommended: 1).
4071 SOUND_POWER_SAVE_ON_AC=0
4072 SOUND_POWER_SAVE_ON_BAT=0
4073
4074 # Disable controller too (HDA only): Y/N.
4075 SOUND_POWER_SAVE_CONTROLLER=N
4076
4077 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4078 # Drive can be powered on again by releasing (and reinserting) the eject lever
4079 # or by pressing the disc eject button on newer models.
4080 # Note: an UltraBay/MediaBay hard disk is never powered off.
4081 BAY_POWEROFF_ON_AC=0
4082 BAY_POWEROFF_ON_BAT=0
4083 # Optical drive device to power off (default sr0).
4084 BAY_DEVICE="sr0"
4085
4086 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4087 RUNTIME_PM_ON_AC=on
4088 RUNTIME_PM_ON_BAT=auto
4089
4090 # Exclude PCI(e) device adresses the following list from Runtime PM
4091 # (separate with spaces). Use lspci to get the adresses (1st column).
4092 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4093 RUNTIME_PM_BLACKLIST="01:00.0"
4094
4095 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4096 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4097 # prevents accidential power-on of dGPU in hybrid graphics setups.
4098 # Use "" to disable the feature completely.
4099 # Separate multiple drivers with spaces.
4100 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4101
4102 # Set to 0 to disable, 1 to enable USB autosuspend feature.
4103 USB_AUTOSUSPEND=1
4104
4105 # Exclude listed devices from USB autosuspend (separate with spaces).
4106 # Use lsusb to get the ids.
4107 # Note: input devices (usbhid) are excluded automatically
4108 #USB_BLACKLIST="1111:2222 3333:4444"
4109
4110 # Bluetooth devices are excluded from USB autosuspend:
4111 # 0=do not exclude, 1=exclude.
4112 USB_BLACKLIST_BTUSB=0
4113
4114 # Phone devices are excluded from USB autosuspend:
4115 # 0=do not exclude, 1=exclude (enable charging).
4116 USB_BLACKLIST_PHONE=0
4117
4118 # Printers are excluded from USB autosuspend:
4119 # 0=do not exclude, 1=exclude.
4120 USB_BLACKLIST_PRINTER=1
4121
4122 # WWAN devices are excluded from USB autosuspend:
4123 # 0=do not exclude, 1=exclude.
4124 USB_BLACKLIST_WWAN=1
4125
4126 # Include listed devices into USB autosuspend even if already excluded
4127 # by the blacklists above (separate with spaces).
4128 # Use lsusb to get the ids.
4129 #USB_WHITELIST="1111:2222 3333:4444"
4130
4131 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4132 # (workaround for USB devices that cause shutdown problems).
4133 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4134
4135 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4136 # on system startup: 0=disable, 1=enable.
4137 # Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4138 # are ignored when this is enabled!
4139 #RESTORE_DEVICE_STATE_ON_STARTUP=0
4140 RESTORE_DEVICE_STATE_ON_STARTUP=1
4141
4142 # Radio devices to disable on startup: bluetooth, wifi, wwan.
4143 # Separate multiple devices with spaces.
4144 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
4145
4146 # Radio devices to enable on startup: bluetooth, wifi, wwan.
4147 # Separate multiple devices with spaces.
4148 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4149
4150 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4151 # (workaround for devices that are blocking shutdown).
4152 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4153
4154 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4155 # (to prevent other operating systems from missing radios).
4156 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4157
4158 # Radio devices to enable on AC: bluetooth, wifi, wwan.
4159 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4160
4161 # Radio devices to disable on battery: bluetooth, wifi, wwan.
4162 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4163
4164 # Radio devices to disable on battery when not in use (not connected):
4165 # bluetooth, wifi, wwan.
4166 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4167
4168 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4169 # required). Charging starts when the remaining capacity falls below the
4170 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4171 # Main / Internal battery (values in %)
4172 #START_CHARGE_THRESH_BAT0=75
4173 #STOP_CHARGE_THRESH_BAT0=80
4174 # Ultrabay / Slice / Replaceable battery (values in %)
4175 #START_CHARGE_THRESH_BAT1=75
4176 #STOP_CHARGE_THRESH_BAT1=80
4177
4178 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4179 #RESTORE_THRESHOLDS_ON_BAT=1
4180
4181 # ------------------------------------------------------------------------------
4182 # tlp-rdw - Parameters for the radio device wizard
4183 # Possible devices: bluetooth, wifi, wwan.
4184
4185 # Hints:
4186 # - Parameters are disabled by default, remove the leading # to enable them
4187 # - Separate multiple radio devices with spaces
4188
4189 # Radio devices to disable on connect.
4190 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4191 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4192 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4193
4194 # Radio devices to enable on disconnect.
4195 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4196 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4197 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4198
4199 # Radio devices to enable/disable when docked.
4200 #DEVICES_TO_ENABLE_ON_DOCK=""
4201 #DEVICES_TO_DISABLE_ON_DOCK=""
4202
4203 # Radio devices to enable/disable when undocked.
4204 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4205 #DEVICES_TO_DISABLE_ON_UNDOCK=""
4206 #+end_src
4207
4208 ** X
4209
4210 *** xprofile
4211 :PROPERTIES:
4212 :header-args+: :tangle ~/.xprofile
4213 :END:
4214
4215 =~/.xprofile= is similar in style to =~/.xinitrc=, but on the
4216 contrary, it's automatically sourced by LightDM, my display manager of
4217 choice.
4218
4219 #+begin_src sh :tangle no
4220 xset -b # disable bell
4221 xset r rate 200 45 # repeat delay (ms) and rate (repeats/sec)
4222
4223 # setxkbmap -option compose:ralt
4224
4225 setxkbmap -option ctrl:nocaps # turn capslock into control
4226 setxkbmap -option altwin:swap_alt_win # swap alt and super
4227
4228 if [ $(hostname) = "plasma" ]
4229 then
4230 setxkbmap -option ctrl:rctrl_ralt # turn right control into right alt
4231 fi
4232
4233 if [ $(hostname) = "enigma" ]
4234 then
4235 xmodmap -e "keycode 135 = Alt_R" # remap menu key to alt
4236 fi
4237
4238 light -Scrs "intel_backlight" 2
4239
4240 source $HOME/.zprofile
4241
4242 export _JAVA_AWT_WM_NONREPARENTING=1
4243 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4244
4245 if [ $(hostname) = "plasma" ]
4246 then
4247 unlock-def-gk.py &
4248 fi
4249
4250 bspwm &
4251 #+end_src
4252
4253 *** X resources
4254
4255 **** Xresources
4256 :PROPERTIES:
4257 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
4258 :END:
4259
4260 #+begin_src conf-xdefaults
4261 #include ".Xresources.d/fonts"
4262 ! #include ".Xresources.d/colors"
4263 #include ".Xresources.d/emacs"
4264 #include ".Xresources.d/rxvt-unicode"
4265 #+end_src
4266
4267 **** Xresources.d
4268
4269 ***** fonts
4270 :PROPERTIES:
4271 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
4272 :END:
4273
4274 #+begin_src conf-xdefaults
4275 Xft.lcdfilter: lcddefault
4276 Xft.antialias: true
4277 Xft.autohint: 0
4278 Xft.hinting: true
4279 Xft.hintstyle: hintslight
4280 ! Xft.hintstyle: hintfull
4281 Xft.rgba: rgb
4282 Xft.dpi: 96
4283 #+end_src
4284
4285 ***** colors
4286 :PROPERTIES:
4287 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
4288 :END:
4289
4290 #+begin_src conf-xdefaults :tangle no
4291 #include "gruvbox-light.xresources"
4292 ! #include "gruvbox-dark.xresources"
4293 #include "gruvbox-urxvt256.xresources"
4294 #+end_src
4295
4296 #+begin_src conf-xdefaults :tangle no
4297 ! -----------------------------------------------------------------------------
4298 ! File: gruvbox-light.xresources
4299 ! Description: Retro groove colorscheme generalized
4300 ! Author: morhetz <morhetz@gmail.com>
4301 ! Source: https://github.com/morhetz/gruvbox-generalized
4302 ! Last Modified: 6 Sep 2014
4303 ! -----------------------------------------------------------------------------
4304
4305 ! hard contrast: *background: #f9f5d7
4306 *background: #fbf1c7
4307 ! soft contrast: *background: #f2e5bc
4308 *foreground: #3c3836
4309 ! Black + DarkGrey
4310 *color0: #fdf4c1
4311 *color8: #928374
4312 ! DarkRed + Red
4313 *color1: #cc241d
4314 *color9: #9d0006
4315 ! DarkGreen + Green
4316 *color2: #98971a
4317 *color10: #79740e
4318 ! DarkYellow + Yellow
4319 *color3: #d79921
4320 *color11: #b57614
4321 ! DarkBlue + Blue
4322 *color4: #458588
4323 *color12: #076678
4324 ! DarkMagenta + Magenta
4325 *color5: #b16286
4326 *color13: #8f3f71
4327 ! DarkCyan + Cyan
4328 *color6: #689d6a
4329 *color14: #427b58
4330 ! LightGrey + White
4331 *color7: #7c6f64
4332 *color15: #3c3836
4333 #+end_src
4334
4335 #+begin_src conf-xdefaults :tangle no
4336 ! -----------------------------------------------------------------------------
4337 ! File: gruvbox-dark.xresources
4338 ! Description: Retro groove colorscheme generalized
4339 ! Author: morhetz <morhetz@gmail.com>
4340 ! Source: https://github.com/morhetz/gruvbox-generalized
4341 ! Last Modified: 6 Sep 2014
4342 ! -----------------------------------------------------------------------------
4343
4344 ! hard contrast: *background: #1d2021
4345 *background: #282828
4346 ! soft contrast: *background: #32302f
4347 *foreground: #ebdbb2
4348 ! Black + DarkGrey
4349 *color0: #282828
4350 *color8: #928374
4351 ! DarkRed + Red
4352 *color1: #cc241d
4353 *color9: #fb4934
4354 ! DarkGreen + Green
4355 *color2: #98971a
4356 *color10: #b8bb26
4357 ! DarkYellow + Yellow
4358 *color3: #d79921
4359 *color11: #fabd2f
4360 ! DarkBlue + Blue
4361 *color4: #458588
4362 *color12: #83a598
4363 ! DarkMagenta + Magenta
4364 *color5: #b16286
4365 *color13: #d3869b
4366 ! DarkCyan + Cyan
4367 *color6: #689d6a
4368 *color14: #8ec07c
4369 ! LightGrey + White
4370 *color7: #a89984
4371 *color15: #ebdbb2
4372 #+end_src
4373
4374 #+begin_src conf-xdefaults :tangle no
4375 ! -----------------------------------------------------------------------------
4376 ! File: gruvbox-urxvt256.xresources
4377 ! Description: Retro groove colorscheme generalized
4378 ! Author: morhetz <morhetz@gmail.com>
4379 ! Source: https://github.com/morhetz/gruvbox-generalized
4380 ! Last Modified: 13 Dec 2013
4381 ! -----------------------------------------------------------------------------
4382
4383 URxvt.color24: #076678
4384 URxvt.color66: #427b58
4385 URxvt.color88: #9d0006
4386 URxvt.color96: #8f3f71
4387 URxvt.color100: #79740e
4388 URxvt.color108: #8ec07c
4389 URxvt.color109: #83a598
4390 URxvt.color130: #af3a03
4391 URxvt.color136: #b57614
4392 URxvt.color142: #b8bb26
4393 URxvt.color167: #fb4934
4394 URxvt.color175: #d3869b
4395 URxvt.color208: #fe8019
4396 URxvt.color214: #fabd2f
4397 URxvt.color223: #ebdbb2
4398 URxvt.color228: #f2e5bc
4399 URxvt.color229: #fbf1c7
4400 URxvt.color230: #f9f5d7
4401 URxvt.color234: #1d2021
4402 URxvt.color235: #282828
4403 URxvt.color236: #32302f
4404 URxvt.color237: #3c3836
4405 URxvt.color239: #504945
4406 URxvt.color241: #665c54
4407 URxvt.color243: #7c6f64
4408 URxvt.color244: #928374
4409 URxvt.color245: #928374
4410 URxvt.color246: #a89984
4411 URxvt.color248: #bdae93
4412 URxvt.color250: #d5c4a1
4413 #+end_src
4414
4415 ***** emacs
4416 :PROPERTIES:
4417 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
4418 :END:
4419
4420 #+begin_src conf-xdefaults
4421 Emacs.menuBar: off
4422 Emacs.toolBar: off
4423 Emacs.verticalScrollBars: off
4424 Emacs.cursorBlink: off
4425 Emacs.FontBackend: xft,x
4426 ! Emacs.font: Ubuntu Mono-12
4427 ! Emacs.font: Triplicate T4C-11
4428 ! Emacs.font: Ubuntu Mono-10.5
4429 ! Emacs.font: Ubuntu Mono-12
4430 ! Emacs.font: Iosevka-11
4431
4432 ! Emacs.font: Fira Mono:size=15
4433 ! Emacs.font: DejaVu Sans Mono:size=15
4434 ! Emacs.font: Inconsolata:size=17
4435 ! Emacs.font: Inconsolata:size=16
4436 ! Emacs.font: Inconsolata LGC:size=14
4437 ! Emacs.font: Source Code Pro Medium-10.5
4438 Emacs.font: Ubuntu Mono:size=16
4439 ! Emacs.font: Iosevka:size=16
4440 #+end_src
4441
4442 ***** rxvt-unicode
4443 :PROPERTIES:
4444 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
4445 :END:
4446
4447 #+begin_src conf-xdefaults
4448 ! Font
4449 URxvt.font: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
4450 URxvt.boldFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
4451 URxvt.italicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
4452 URxvt.bolditalicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
4453
4454 URxvt.xftAntialias: true
4455 URxvt.letterSpace: 0
4456
4457 URxvt.depth: 0
4458 URxvt.loginShell: true
4459 URxvt.saveLines: 100000
4460 URxvt.internalBorder: 3
4461 URxvt.lineSpace: 0
4462 URxvt.scrollBar: false
4463 URxvt.scrollStyle: rxvt
4464 URxvt*scrollTtyOutput: false
4465 URxvt*scrollWithBuffer: true
4466 URxvt*scrollTtyKeypress: true
4467 URxvt.keysym.Shift-Up: command:\033]720;1\007
4468 URxvt.keysym.Shift-Down: command:\033]721;1\007
4469
4470 URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select
4471 URxvt.perl-ext: bidi
4472 URxvt.bidi.enabled: 1
4473 URxvt.url-select.launcher: firefox
4474 URxvt.url-select.underline: true
4475 URxvt.keysym.M-u: perl:url-select:select_next
4476 URxvt.keysym.M-Escape: perl:keyboard-select:activate
4477 URxvt.keysym.M-s: perl:keyboard-select:search
4478 URxvt.url-launcher: /usr/bin/firefox
4479 URxvt.matcher.button: 1
4480 URxvt.iso14755: false
4481 URxvt.iso14755_53: false
4482 URxvt.keysym.M-c: perl:clipboard:copy
4483 URxvt.keysym.M-v: perl:clipboard:paste
4484 URxvt.keysym.C-A-V: perl:clipboard:paste_escaped
4485 URxvt.keysym.C-Up: font-size:increase
4486 URxvt.keysym.C-Down: font-size:decrease
4487 URxvt.keysym.C-S-Up: font-size:incglobal
4488 URxvt.keysym.C-S-Down: font-size:decglobal
4489 URxvt.keysym.C-equal: font-size:reset
4490 !URxvt.keysym.C-question: font-size:show
4491
4492 URxvt.iconFile: /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
4493
4494 !urxvt*foreground: white
4495 !urxvt*background: black
4496
4497 !*color0: #2E3436
4498 !*color1: #a40000
4499 !*color2: #4E9A06
4500 !*color3: #C4A000
4501 !*color4: #3465A4
4502 !*color5: #75507B
4503 !*color6: #ce5c00
4504 !*color7: #babdb9
4505 !*color8: #555753
4506 !*color9: #EF2929
4507 !*color10: #8AE234
4508 !*color11: #FCE94F
4509 !*color12: #729FCF
4510 !*color13: #AD7FA8
4511 !*color14: #fcaf3e
4512 !*color15: #EEEEEC
4513
4514 !URxvt.foreground: #C8C8C8
4515 !URxvt.background: #FFFFFF
4516
4517 !! black
4518 !*color0: #2E3436
4519 !*color8: #555753
4520 !! red
4521 !*color1: #a40000
4522 !*color9: #EF2929
4523 !! green
4524 !*color2: #4E9A06
4525 !*color10: #8AE234
4526 !! yellow
4527 !*color3: #C4A000
4528 !*color11: #FCE94F
4529 !! blue
4530 !*color4: #3465A4
4531 !*color12: #729FCF
4532 !! purple
4533 !*color5: #75507B
4534 !*color13: #AD7FA8
4535 !! orange (replaces cyan)
4536 !*color6: #ce5c00
4537 !*color14: #fcaf3e
4538 !! white
4539 !*color7: #babdb9
4540 !*color15: #EEEEEC
4541
4542 ! Tango colour theme for rxvt-unicode
4543 URxvt.background: #FFFFFF
4544 URxvt.foreground: #000000
4545
4546 ! Black
4547 URxvt.color0: #2E3436
4548 URxvt.color8: #757773
4549
4550 ! Red
4551 URxvt.color1: #CC0000
4552 URxvt.color9: #EF2929
4553
4554 ! Green
4555 URxvt.color2: #4E9A06
4556 URxvt.color10: #8AE234
4557
4558 ! Yellow
4559 URxvt.color3: #C4A000
4560 URxvt.color11: #FCE94F
4561
4562 ! Blue
4563 URxvt.color4: #3465A4
4564 URxvt.color12: #729FCF
4565
4566 ! Magenta
4567 URxvt.color5: #75507B
4568 URxvt.color13: #AD7FA8
4569
4570 !! Cyan
4571 !URxvt.color6: #06989A
4572 !URxvt.color14: #34E2E2
4573 ! orange (replaces cyan)
4574 *color6: #ce5c00
4575 *color14: #fcaf3e
4576
4577 ! White
4578 URxvt.color7: #D3D7CF
4579 URxvt.color15: #EEEEEC
4580 #+end_src
4581
4582 ** XDG
4583 :PROPERTIES:
4584 :header-args+: :tangle ~/.config/user-dirs.dirs
4585 :END:
4586
4587 #+begin_src conf
4588 XDG_DESKTOP_DIR="$HOME/Desktop"
4589 XDG_DOCUMENTS_DIR="$HOME/usr/docs"
4590 XDG_DOWNLOAD_DIR="$HOME/usr/dls"
4591 XDG_MUSIC_DIR="$HOME/usr/music"
4592 XDG_PICTURES_DIR="$HOME/usr/pics"
4593 XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
4594 XDG_TEMPLATES_DIR="$HOME/usr/Templates"
4595 XDG_VIDEOS_DIR="$HOME/usr/vids"
4596 #+end_src
4597
4598 ** Zathura
4599 :PROPERTIES:
4600 :header-args+: :tangle ~/.config/zathura/zathurarc
4601 :END:
4602
4603 #+begin_src conf
4604 set smooth-scroll true
4605 set selection-clipboard clipboard
4606 set zoom-step 05
4607 set default-bg "#272727"
4608 set statusbar-bg "#272727"
4609 set inputbar-bg "#373737"
4610 #+end_src
4611
4612 ** Zsh
4613
4614 My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
4615 [[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
4616 installed.
4617
4618 *** zimrc
4619 :PROPERTIES:
4620 :header-args+: :tangle ~/.zimrc
4621 :END:
4622
4623 #+begin_src sh
4624
4625
4626 #################
4627 # CORE SETTINGS #
4628 #################
4629
4630 #
4631 # Zim settings
4632 #
4633
4634 # Select what modules you would like enabled.
4635 # The second line of modules may depend on options set by modules in the first
4636 # line. These dependencies are noted on the respective module's README.md.
4637 zmodules=(directory environment git git-info history input ssh utility custom \
4638 syntax-highlighting history-substring-search prompt completion)
4639
4640
4641 ###################
4642 # MODULE SETTINGS #
4643 ###################
4644
4645 #
4646 # Prompt
4647 #
4648
4649 # Set your desired prompt here
4650 zprompt_theme='pure'
4651 #PURE_PROMPT_SYMBOL=λ
4652 #PURE_PROMPT_SYMBOL=δ
4653 PURE_PROMPT_SYMBOL=➜
4654
4655 #
4656 # Completion
4657 #
4658
4659 # set an optional host-specific filename for the completion cache file
4660 # if none is provided, the default '.zcompdump' is used.
4661 #zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
4662
4663 #
4664 # Utility
4665 #
4666
4667 # Uncomment to enable command correction prompts
4668 # See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
4669 setopt CORRECT
4670
4671 #
4672 # Environment
4673 #
4674
4675 # Set the string below to the desired terminal title format string.
4676 # The terminal title is redrawn upon directory change, however, variables like
4677 # ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
4678 # http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
4679 # The example below uses the following format: 'username@host:/current/directory'
4680 ztermtitle='%n@%m:%~'
4681
4682 #
4683 # Input
4684 #
4685
4686 # Uncomment to enable double-dot expansion.
4687 # This appends '../' to your input for each '.' you type after an initial '..'
4688 #zdouble_dot_expand='true'
4689
4690 #
4691 # Syntax-Highlighting
4692 #
4693
4694 # This determines what highlighters will be used with the syntax-highlighting module.
4695 # Documentation of the highlighters can be found here:
4696 # https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
4697 # For (u)rxvt, termite and gnome-terminal users,
4698 # removing the 'cursor' highlighter will fix the disappearing cursor problem
4699 #zhighlighters=(main brackets cursor)
4700 zhighlighters=(main brackets pattern)
4701
4702
4703 #
4704 # SSH
4705 #
4706
4707 # Load these ssh identities with the ssh module
4708 zssh_ids=(id_rsa plasma_id_rsa id_ed25519 id_rsa_aur)
4709
4710
4711 #
4712 # Pacman
4713 #
4714
4715 # Set (optional) pacman front-end.
4716 zpacman_frontend='yay'
4717
4718 # Load any helper scripts as defined here
4719 #zpacman_helper=(aur)
4720 #+end_src
4721
4722 *** zlogin
4723 :PROPERTIES:
4724 :header-args+: :tangle ~/.zlogin
4725 :END:
4726
4727 #+begin_src sh
4728
4729
4730 #
4731 # User configuration sourced by login shells
4732 #
4733
4734 # Initialize zim
4735 [[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
4736 #+end_src
4737
4738 *** zprofile
4739 :PROPERTIES:
4740 :header-args+: :tangle ~/.zprofile
4741 :END:
4742
4743 #+begin_src sh
4744 #PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
4745 #PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
4746 export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
4747 export XDG_CONFIG_HOME=$HOME/.config
4748 export XDG_DATA_HOME=$HOME/.local/share
4749 export XDG_DATA_DIRS=/usr/local/share:/usr/share
4750 export MAILDIR="$HOME/mail"
4751 export CVS_RSH=ssh
4752 #export MATHMODELS=$HOME/src/eiffel/mathmodels
4753 #export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
4754 #export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
4755
4756 # Eiffel2Java stuff
4757 #export JAVA_HOME=/usr/lib/jvm/default
4758 #export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
4759 #export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4760 #export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
4761
4762 #export PATH="$HOME/usr/build/pvs:$PATH"
4763 #export SBCLISP_HOME=/usr/share/sbcl-source
4764 #export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
4765
4766 export MOZ_USE_XINPUT2=1 # precise scrolling in firefox
4767
4768 #export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
4769 #export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
4770
4771 if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
4772 #+end_src
4773
4774 *** zshenv
4775 :PROPERTIES:
4776 :header-args+: :tangle ~/.zshenv
4777 :END:
4778
4779 #+begin_src sh
4780 # Ensure that a non-login, non-interactive shell has a defined environment.
4781 if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
4782 source "${ZDOTDIR:-$HOME}/.zprofile"
4783 fi
4784 #+end_src
4785
4786 *** zshrc
4787 :PROPERTIES:
4788 :header-args+: :tangle ~/.zshrc
4789 :END:
4790
4791 #+begin_src sh
4792 # Bash-like navigation
4793 #export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
4794 #export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
4795 export WORDCHARS='*?[]~=&;!#$%^(){}<>'
4796 #ZLE_SPACE_SUFFIX_CHARS=$'|&'
4797
4798 #disable -r time # disable shell reserved word
4799 #alias time='time -p' # -p for POSIX output
4800
4801 # rehash if last command was pacaur or pacman
4802 # (so that zsh picks up changes in $PATH immediately)
4803 TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
4804
4805 #
4806 # User configuration sourced by interactive shells
4807 #
4808
4809 # Change default zim location
4810 export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
4811
4812 # Start zim
4813 [[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
4814
4815 ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
4816 #ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
4817
4818 setopt globdots
4819
4820 source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
4821 source ~/.zsh/zsh-autopair/autopair.zsh
4822
4823
4824 ### fzf ###
4825
4826 source /usr/share/fzf/key-bindings.zsh
4827 source /usr/share/fzf/completion.zsh
4828
4829 # Accept history selection instead of putting it on
4830 # the command line
4831 fzf-history-widget-accept() {
4832 fzf-history-widget
4833 zle accept-line
4834 }
4835 #zle -N fzf-history-widget-accept
4836 #bindkey '^R' fzf-history-widget-accept
4837
4838 # alt+c preview
4839 export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
4840
4841 ### fzf ###
4842
4843
4844 # aliases
4845 alias mpv="mpv --ytdl-format mp4"
4846 alias mv="mv -iv"
4847 alias cp="cp -iv"
4848 alias scl=systemctl
4849 alias jcl=journalctl
4850 alias m="mbsync -Va; getmail; notmuch new"
4851 alias best="youtube-dl -f best"
4852 alias nixx="ssh amin@nix.aminb.org"
4853 alias fence="ssh aminb@fencepost.gnu.org"
4854
4855 aur() {
4856 cd ~/usr/build
4857 git clone https://aur.archlinux.org/${1}.git
4858 cd ${1}
4859 }
4860
4861 # i-beam cursor
4862 echo -e "\033[5 q"
4863 #echo -e "\033[6 q"
4864 #+end_src
4865
4866 * Scripts
4867
4868 This section contains various useful scripts and the ones used by the
4869 programs above. For instance, =toggle-tablet= for switching to and
4870 from tablet mode on my X220T, =toggle-presentation-mode= for toggling
4871 Xfce's presentation mode which keeps the screen awake, and
4872 =rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
4873 exact brightness value.
4874
4875 ** rofi-light
4876 :PROPERTIES:
4877 :header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
4878 :END:
4879
4880 #+begin_src bash
4881 cur=$(light -G)
4882 val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 12)
4883 light -S $val
4884 #+end_src
4885
4886 ** s (run sway)
4887 :PROPERTIES:
4888 :header-args+: :tangle ~/.local/bin/s :shebang "#!/bin/bash"
4889 :END:
4890
4891 #+begin_src bash
4892 export _JAVA_AWT_WM_NONREPARENTING=1
4893 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4894 light -Scrs "intel_backlight" 2
4895 source $HOME/.zprofile
4896 sway
4897 #+end_src
4898
4899 ** sway-ws-util
4900 :PROPERTIES:
4901 :header-args+: :tangle ~/.local/bin/sway-ws-util :shebang "#!/bin/bash"
4902 :END:
4903
4904 #+begin_src bash
4905 curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name')
4906 [[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1))
4907 [[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1))
4908 dest_ws=-1
4909 op=-1
4910
4911 if [ "$1" = "switch" ] || [ "$1" = "move" ]; then
4912 op="$1"
4913 if [ "$2" = "prev" ]; then
4914 dest_ws="$prev_ws"
4915 elif [ "$2" = "next" ]; then
4916 dest_ws="$next_ws"
4917 else
4918 echo "Usage: $0 $1 {prev|next} [follow]"
4919 exit 1
4920 fi
4921 else
4922 echo "Usage: $0 {switch|move} {prev|next} [follow]"
4923 exit 1
4924 fi
4925
4926 if [ "$op" = "switch" ]; then
4927 sway workspace "$dest_ws"
4928 elif [ "$op" = "move" ]; then
4929 sway move container to workspace "$dest_ws"
4930 if [ "$3" = "follow" ]; then
4931 sway workspace "$dest_ws"
4932 fi
4933 fi
4934 #+end_src
4935
4936 ** toggle-layout
4937 :PROPERTIES:
4938 :header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
4939 :END:
4940
4941 #+begin_src bash
4942 lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
4943
4944 if [ "$lang" = "us" ]; then
4945 setxkbmap ir
4946 else
4947 setxkbmap us
4948 # xmodmap $HOME/.Xmodmap
4949 fi
4950 #+end_src
4951
4952 ** toggle-presentation-mode
4953 :PROPERTIES:
4954 :header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
4955 :END:
4956
4957 #+begin_src bash
4958 xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
4959 #+end_src
4960
4961 ** toggle-tablet
4962 :PROPERTIES:
4963 :header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
4964 :END:
4965
4966 This script toggles between a 'normal' mode and a 'tablet' mode, doing
4967 a few things:
4968
4969 - rotates the screen using =xrandr=, so that rotating the physical
4970 display of my X220t would have the laptop's battery on the right
4971 hand side,
4972 - enables touch screen,
4973 - properly rotates the stylus pen and touch screen pointers, and
4974 - toggles between RGB and Vertical BGR sub-pixel order.
4975
4976 #+begin_src bash
4977 case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
4978 0) # Screen is not rotated, we should rotate it right (90°)
4979 xrandr -o 3
4980 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
4981 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
4982 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
4983 xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
4984 ;;
4985 1) # Currently top is rotated right, we should set it normal (0°)
4986 xrandr -o 0
4987 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
4988 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
4989 xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
4990 xfconf-query -c xsettings -p /Xft/RGBA -s rgb
4991 ;;
4992 *)
4993 echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
4994 exit 1
4995 ;;
4996 esac
4997 #+end_src
4998
4999 ** unlock-def-gk.py
5000 :PROPERTIES:
5001 :header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
5002 :END:
5003
5004 #+begin_src python
5005 import gnomekeyring as gk
5006 # list_item_ids_sync('login')[0] == 1L
5007 gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
5008 #+end_src
5009
5010 ** wp
5011
5012 My little wallpaper changer script.
5013
5014 *** wp
5015 :PROPERTIES:
5016 :header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
5017 :END:
5018
5019 #+begin_src bash :tangle no
5020 export DISPLAY=:0
5021
5022 case "$1" in
5023 "day")
5024 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5025 ;;
5026 "night")
5027 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5028 ;;
5029 *)
5030 echo $"Usage: $0 {day|night}"
5031 exit 1
5032 esac
5033 #+end_src
5034
5035 *** wp-auto
5036 :PROPERTIES:
5037 :header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
5038 :END:
5039
5040 #+begin_src bash :tangle no
5041 SED=$(which sed)
5042 ROFI=$(which rofi)
5043
5044 export DISPLAY=:0
5045 HOUR=$(date +%H)
5046
5047 if [ -z "${SED}" ]
5048 then
5049 echo "Did not find 'sed', script cannot continue."
5050 exit 1
5051 fi
5052 if [ -z "${ROFI}" ]
5053 then
5054 echo "Did not find rofi, there is no point to continue."
5055 exit 1
5056 fi
5057
5058 ###
5059 # Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
5060 # Repeated calls should leave the config clean-ish
5061 ###
5062 function set_theme()
5063 {
5064 CDIR="${HOME}/.config/rofi/"
5065 if [ ! -d "${CDIR}" ]
5066 then
5067 mkdir -p ${CDIR}
5068 fi
5069 if [ -f "${CDIR}/config" ]
5070 then
5071 ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
5072 fi
5073 echo "rofi.theme: ${1}" >> "${CDIR}/config"
5074
5075 }
5076
5077 if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
5078 then
5079 feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5080 xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
5081 set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
5082 else
5083 feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5084 xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
5085 set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
5086 fi
5087 #+end_src
5088
5089 *** wp.service
5090 :PROPERTIES:
5091 :header-args+: :tangle ~/.config/systemd/user/wp.service
5092 :END:
5093
5094 #+begin_src conf :tangle no
5095 [Unit]
5096 Description=wallpaper service
5097
5098 [Service]
5099 Type=oneshot
5100 ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
5101 #+end_src
5102
5103 *** wp.timer
5104 :PROPERTIES:
5105 :header-args+: :tangle ~/.config/systemd/user/wp.timer
5106 :END:
5107
5108 #+begin_src conf :tangle no
5109 [Unit]
5110 [Unit]
5111 Description=wallpaper timer
5112
5113 [Timer]
5114 OnCalendar=07,21:00
5115 Unit=wp.service
5116 Persistent=true
5117
5118 [Install]
5119 WantedBy=timers.target
5120 #+end_src
5121
5122 ** zathura-sync.sh
5123 :PROPERTIES:
5124 :header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
5125 :END:
5126
5127 #+begin_src sh
5128 pos="$1"
5129 pdffile="$2"
5130 zathura --synctex-forward "$pos" "$pdffile" || \
5131 (
5132 zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
5133 sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
5134 #+end_src
5135 ** Fun :)
5136
5137 *** eat-em
5138 :PROPERTIES:
5139 :header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
5140 :END:
5141
5142 #+begin_src sh
5143 # Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5144 # [ESC] character in original post removed here.
5145
5146 # ANSI Color -- use these variables to easily have different color
5147 # and format output. Make sure to output the reset sequence after
5148 # colors (f = foreground, b = background), and use the 'off'
5149 # feature for anything you turn on.
5150
5151 initializeANSI()
5152 {
5153 esc="$(echo -en '\e')"
5154
5155 blackf="${esc}[30m"; redf="${esc}[31m"; greenf="${esc}[32m"
5156 yellowf="${esc}[33m" bluef="${esc}[34m"; purplef="${esc}[35m"
5157 cyanf="${esc}[36m"; whitef="${esc}[37m"
5158
5159 blackb="${esc}[40m"; redb="${esc}[41m"; greenb="${esc}[42m"
5160 yellowb="${esc}[43m" blueb="${esc}[44m"; purpleb="${esc}[45m"
5161 cyanb="${esc}[46m"; whiteb="${esc}[47m"
5162
5163 boldon="${esc}[1m"; boldoff="${esc}[22m"
5164 italicson="${esc}[3m"; italicsoff="${esc}[23m"
5165 ulon="${esc}[4m"; uloff="${esc}[24m"
5166 invon="${esc}[7m"; invoff="${esc}[27m"
5167
5168 reset="${esc}[0m"
5169 }
5170
5171 # note in this first use that switching colors doesn't require a reset
5172 # first - the new color overrides the old one.
5173
5174 #clear
5175
5176 initializeANSI
5177
5178 cat << EOF
5179
5180 ${yellowf} ▄███████▄${reset} ${redf} ▄██████▄${reset} ${greenf} ▄██████▄${reset} ${bluef} ▄██████▄${reset} ${purplef} ▄██████▄${reset} ${cyanf} ▄██████▄${reset}
5181 ${yellowf}▄█████████▀▀${reset} ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset} ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset} ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset} ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset} ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5182 ${yellowf}███████▀${reset} ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset} ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset} ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset} ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset} ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5183 ${yellowf}███████▄${reset} ${redf}████████████${reset} ${greenf}████████████${reset} ${bluef}████████████${reset} ${purplef}████████████${reset} ${cyanf}████████████${reset}
5184 ${yellowf}▀█████████▄▄${reset} ${redf}██▀██▀▀██▀██${reset} ${greenf}██▀██▀▀██▀██${reset} ${bluef}██▀██▀▀██▀██${reset} ${purplef}██▀██▀▀██▀██${reset} ${cyanf}██▀██▀▀██▀██${reset}
5185 ${yellowf} ▀███████▀${reset} ${redf}▀ ▀ ▀ ▀${reset} ${greenf}▀ ▀ ▀ ▀${reset} ${bluef}▀ ▀ ▀ ▀${reset} ${purplef}▀ ▀ ▀ ▀${reset} ${cyanf}▀ ▀ ▀ ▀${reset}
5186
5187 ${boldon}${yellowf} ▄███████▄ ${redf} ▄██████▄ ${greenf} ▄██████▄ ${bluef} ▄██████▄ ${purplef} ▄██████▄ ${cyanf} ▄██████▄${reset}
5188 ${boldon}${yellowf}▄█████████▀▀ ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄ ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄ ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄ ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄ ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5189 ${boldon}${yellowf}███████▀ ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███ ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███ ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███ ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███ ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5190 ${boldon}${yellowf}███████▄ ${redf}████████████ ${greenf}████████████ ${bluef}████████████ ${purplef}████████████ ${cyanf}████████████${reset}
5191 ${boldon}${yellowf}▀█████████▄▄ ${redf}██▀██▀▀██▀██ ${greenf}██▀██▀▀██▀██ ${bluef}██▀██▀▀██▀██ ${purplef}██▀██▀▀██▀██ ${cyanf}██▀██▀▀██▀██${reset}
5192 ${boldon}${yellowf} ▀███████▀ ${redf}▀ ▀ ▀ ▀ ${greenf}▀ ▀ ▀ ▀ ${bluef}▀ ▀ ▀ ▀ ${purplef}▀ ▀ ▀ ▀ ${cyanf}▀ ▀ ▀ ▀${reset}
5193
5194 EOF
5195 #+end_src
5196
5197 *** invade-em
5198 :PROPERTIES:
5199 :header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
5200 :END:
5201
5202 #+begin_src bash
5203 #
5204 # ANSI color scheme script featuring Space Invaders
5205 #
5206 # Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5207 # Modified by lolilolicon
5208 #
5209
5210 f=3 b=4
5211 for j in f b; do
5212 for i in {0..7}; do
5213 printf -v $j$i %b "\e[${!j}${i}m"
5214 done
5215 done
5216 bld=$'\e[1m'
5217 rst=$'\e[0m'
5218
5219 cat << EOF
5220
5221 $f1 ▀▄ ▄▀ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4 ▀▄ ▄▀ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
5222 $f1 ▄█▀███▀█▄ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4 ▄█▀███▀█▄ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
5223 $f1█▀███████▀█ $f2▀▀███▀▀███▀▀ $f3▀█▀██▀█▀ $f4█▀███████▀█ $f5▀▀███▀▀███▀▀ $f6▀█▀██▀█▀$rst
5224 $f1▀ ▀▄▄ ▄▄▀ ▀ $f2 ▀█▄ ▀▀ ▄█▀ $f3▀▄ ▄▀ $f4▀ ▀▄▄ ▄▄▀ ▀ $f5 ▀█▄ ▀▀ ▄█▀ $f6▀▄ ▄▀$rst
5225
5226 $bld$f1▄ ▀▄ ▄▀ ▄ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4▄ ▀▄ ▄▀ ▄ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
5227 $bld$f1█▄█▀███▀█▄█ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4█▄█▀███▀█▄█ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
5228 $bld$f1▀█████████▀ $f2▀▀▀██▀▀██▀▀▀ $f3▀▀█▀▀█▀▀ $f4▀█████████▀ $f5▀▀▀██▀▀██▀▀▀ $f6▀▀█▀▀█▀▀$rst
5229 $bld$f1 ▄▀ ▀▄ $f2▄▄▀▀ ▀▀ ▀▀▄▄ $f3▄▀▄▀▀▄▀▄ $f4 ▄▀ ▀▄ $f5▄▄▀▀ ▀▀ ▀▀▄▄ $f6▄▀▄▀▀▄▀▄$rst
5230
5231
5232 $f7▌$rst
5233
5234 $f7▌$rst
5235
5236 $f7 ▄█▄ $rst
5237 $f7▄█████████▄$rst
5238 $f7▀▀▀▀▀▀▀▀▀▀▀$rst
5239
5240 EOF
5241 #+end_src