git.shemshak.org - ~bandali/configs/blob - rc.org

   1 #+title: rc.org
   2 #+property: header-args :comments link :mkdirp yes :results silent
   3
   4 * About
   5
   6 This org file contains the configuration files of pretty much every
   7 program I use. The files are tangled (i.e. exported, or derived) from
   8 this file using =org-babel=.
   9
  10 Note: This file is best viewed inside Emacs with org mode.
  11
  12 * Configs
  13
  14 This section contains the configuration files (dotfiles) of various
  15 programs I use.
  16
  17 ** bspwm
  18
  19 *** bspwmrc
  20 :PROPERTIES:
  21 :header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang "#!/bin/sh"
  22 :END:
  23
  24 #+begin_src sh :tangle no
  25 sxhkd &
  26 sh ~/.fehbg &
  27 xfce4-panel -d &
  28 compton &
  29 sleep 0.5 && pasystray --notify=all &
  30
  31 bspc monitor -d I II III IV V VI VII VIII IX X
  32 #bspc monitor eDP-1 -d I II III IV V
  33 #bspc monitor HDMI-1 -d VI VII VIII IX X
  34
  35 #bspc config border_width         2
  36 #bspc config window_gap           8
  37 bspc config window_gap           0
  38
  39 bspc config bottom_padding 26
  40
  41 bspc config split_ratio          0.52
  42 bspc config borderless_monocle   true
  43 bspc config gapless_monocle      true
  44 bspc config click_to_focus       button1
  45 bspc config directional_focus_tightness low
  46
  47 #bspc rule -a Firefox desktop='^1' follow=on
  48 bspc rule -a Nightly desktop='^1' follow=on
  49 bspc rule -a Emacs desktop='^2' state=tiled follow=on
  50 #bspc rule -a Chromium desktop='^4' follow=on
  51 bspc rule -a URxvt state=floating
  52 bspc rule -a URxvt:tiled state=tiled
  53 bspc rule -a Connman-gtk state=floating
  54 bspc rule -a Xfce4-panel state=floating
  55 bspc rule -a TelegramDesktop state=floating
  56 bspc rule -a Ec state=floating
  57 bspc rule -a Pavucontrol state=floating
  58 bspc rule -a Eog state=floating
  59 bspc rule -a Seahorse state=floating
  60 bspc rule -a mpv state=floating
  61 bspc rule -a Evince state=floating
  62 bspc rule -a Meld state=floating
  63 bspc rule -a Autokey-gtk state=floating
  64 bspc rule -a Mousepad state=floating
  65 bspc rule -a Wrapper-1.0 state=floating
  66 bspc rule -a File-roller state=floating
  67 bspc rule -a Gnome-disks state=floating
  68 bspc rule -a Termite state=floating
  69 bspc rule -a Termite:tiled state=tiled
  70 bspc rule -a Thunderbird:Calendar state=floating
  71 bspc rule -a Audacity state=floating
  72 bspc rule -a Proof state=floating # pvs x-show-proof
  73 bspc rule -a Nm-connection-editor state=floating
  74 bspc rule -a Wire state=floating
  75 bspc rule -a discord state=floating
  76 bspc rule -a X2goclient state=floating
  77 bspc rule -a SimpleScreenRecorder state=floating
  78 bspc rule -a Gimp state=floating
  79 bspc rule -a Wrapper-2.0 state=floating
  80 bspc rule -a Zathura state=tiled
  81 #+end_src
  82
  83 *** sxhkdrc
  84 :PROPERTIES:
  85 :header-args+: :tangle ~/.config/sxhkd/sxhkdrc
  86 :END:
  87
  88 #+begin_src conf :tangle no
  89 #
  90 # wm independent hotkeys
  91 #
  92
  93 # terminal emulator
  94 super + {_,shift} + Return
  95         urxvt{_, -name tiled}
  96
  97 #super + {_,shift} + Return
  98 #       termite{_, --name=tiled}
  99
 100 # program launcher
 101 super + space
 102         rofi -show run -display-run '> ' -display-window ' 🗔 '
 103
 104 super + alt + space
 105         xfce4-popup-whiskermenu
 106
 107 # window finder
 108 super + backslash
 109         rofi -show window  -display-run '> ' -display-window ' 🗔 '
 110
 111 # password manager
 112 alt + space
 113         rofi-pass
 114
 115 # firefox
 116 #super + r
 117 #       firefox
 118
 119 # chromium
 120 #super + c
 121 #       chromium -incognito
 122
 123 # emacs
 124 super + e
 125         emacs
 126
 127 # make sxhkd reload its configuration files:
 128 super + Escape
 129         pkill -USR1 -x sxhkd
 130
 131 # volume {up,down}
 132 XF86Audio{Raise,Lower}Volume
 133         pamixer --allow-boost --{in,de}crease 5
 134
 135 # mute
 136 XF86AudioMute
 137         pamixer --toggle-mute
 138
 139 XF86AudioMicMute
 140         pactl set-source-mute 1 toggle
 141
 142 # playback control
 143 XF86Audio{Play,Prev,Next}
 144         mpc {toggle,prev,next}
 145
 146 # lock the screen
 147 super + shift + q
 148         light-locker-command -l
 149
 150 # Toggle keyboard layout
 151 super + F7
 152         toggle-layout
 153
 154 # Toggle Xfce presentation mode
 155 XF86LaunchB
 156         toggle-presentation-mode
 157
 158 # monitor brightness
 159 XF86MonBrightness{Up,Down}
 160         light -{A,U} 5
 161
 162 super + apostrophe
 163         rofi-light
 164
 165 # keyboard brightness
 166 #XF86KbdBrightness{Up,Down}
 167 #       kbdlight {up,down}
 168
 169 XF86RotateWindows
 170         toggle-tablet
 171
 172 #
 173 # bspwm hotkeys
 174 #
 175
 176 # quit bspwm normally
 177 super + alt + Escape
 178         bspc quit
 179
 180 # close and kill
 181 super + {w,q}
 182         bspc node -{c,k}
 183
 184 # alternate between the tiled and monocle layout
 185 super + m
 186         bspc desktop -l next
 187
 188 # send the newest marked node to the newest preselected node
 189 super + y
 190         bspc node newest.marked.local -n newest.!automatic.local
 191
 192 # swap the current node and the biggest node
 193 super + g
 194         bspc node -s biggest
 195
 196 #
 197 # state/flags
 198 #
 199
 200 # set the window state
 201 super + {t,shift + t,s,f}
 202         bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
 203
 204 # set the node flags
 205 super + ctrl + {m,x,y,z}
 206         bspc node -g {marked,locked,sticky,private}
 207
 208 #
 209 # focus/swap
 210 #
 211
 212 # focus the node in the given direction
 213 super + {_,shift + }{h,j,k,l}
 214         bspc node -{f,s} {west,south,north,east}
 215
 216 # focus the node for the given path jump
 217 super + {p,b,comma,period}
 218         bspc node -f @{parent,brother,first,second}
 219
 220 # focus the next/previous node in the current desktop
 221 super + {_,shift + }c
 222         bspc node -f {next,prev}.local
 223
 224 # focus the next/previous desktop in the current monitor
 225 super + bracket{left,right}
 226         bspc desktop -f {prev,next}.local
 227
 228 # send to next/prev desktop
 229 super + shift + bracket{left,right}
 230         bspc node -d {prev,next} --follow
 231
 232 # focus the last node/desktop
 233 super + {grave,Tab}
 234         bspc {node,desktop} -f last
 235
 236 # focus the older or newer node in the focus history
 237 super + {o,i}
 238         bspc wm -h off; \
 239         bspc node {older,newer} -f; \
 240         bspc wm -h on
 241
 242 # focus or send to the given desktop
 243 super + {_,shift + }{1-9,0}
 244         bspc {desktop -f,node -d} '^{1-9,10}'
 245
 246 #
 247 # preselect
 248 #
 249
 250 # preselect the direction
 251 super + ctrl + {h,j,k,l}
 252         bspc node -p {west,south,north,east}
 253
 254 # preselect the ratio
 255 super + ctrl + {1-9}
 256         bspc node -o 0.{1-9}
 257
 258 # cancel the preselection for the focused node
 259 super + ctrl + space
 260         bspc node -p cancel
 261
 262 # cancel the preselection for the focused desktop
 263 super + ctrl + shift + space
 264         bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
 265
 266 #
 267 # move/resize
 268 #
 269
 270 # expand a window by moving one of its side outward
 271 super + alt + {h,j,k,l}
 272         bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
 273
 274 # contract a window by moving one of its side inward
 275 super + alt + shift + {h,j,k,l}
 276         bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
 277
 278 # move a floating window
 279 super + {Left,Down,Up,Right}
 280         bspc node -v {-20 0,0 20,0 -20,20 0}
 281
 282 #alt + bracket{left,right}
 283 #       xdotool key --clearmodifiers ctrl+Page_{Up,Down}
 284 #+end_src
 285
 286 ** compton
 287 :PROPERTIES:
 288 :header-args+: :tangle ~/.config/compton.conf
 289 :END:
 290
 291 #+begin_src conf :tangle no
 292 # Shadow
 293 shadow = false;                 # Enabled client-side shadows on windows.
 294 no-dock-shadow = true;          # Avoid drawing shadows on dock/panel windows.
 295 no-dnd-shadow = true;           # Don't draw shadows on DND windows.
 296 clear-shadow = true;            # Zero the part of the shadow's mask behind the
 297                                 # window. Fix some weirdness with ARGB windows.
 298 shadow-radius = 5;              # The blur radius for shadows. (default 12)
 299 shadow-offset-x = -5;           # The left offset for shadows. (default -15)
 300 shadow-offset-y = -5;           # The top offset for shadows. (default -15)
 301 # shadow-opacity = 0.7;         # The translucency for shadows. (default .75)
 302 # shadow-red = 0.0;             # Red color value of shadow. (0.0 - 1.0, defaults to 0)
 303 # shadow-green = 0.0;           # Green color value of shadow. (0.0 - 1.0, defaults to 0)
 304 # shadow-blue = 0.0;            # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
 305 shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ];    # Exclude conditions for shadows.
 306 # shadow-exclude = "n:e:Notification";
 307 #shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
 308 shadow-ignore-shaped = true;    # Avoid drawing shadow on all shaped windows
 309                                 # (see also: --detect-rounded-corners)
 310
 311 # Opacity
 312 menu-opacity = 1.0;                     # The opacity for menus. (default 1.0)
 313 #inactive-opacity = 0.9;                        # Default opacity of inactive windows. (0.0 - 1.0)
 314 # active-opacity = 0.8;                 # Default opacity for active windows. (0.0 - 1.0)
 315 frame-opacity = 1.0;                    # Opacity of window titlebars and borders. (0.1 - 1.0)
 316 # inactive-opacity-override = true;     # Let inactive opacity set by 'inactive-opacity' overrides
 317                                         # value of _NET_WM_OPACITY. Bad choice.
 318 alpha-step = 0.06;                      # XRender backend: Step size for alpha pictures. Increasing
 319                                         # it may result in less X resource usage,
 320                                         # Yet fading may look bad.
 321 #inactive-dim = 0.5;                    # Dim inactive windows. (0.0 - 1.0)
 322 #inactive-dim-fixed = true;             # Do not let dimness adjust based on window opacity.
 323 # blur-background = true;               # Blur background of transparent windows.
 324                                         # Bad performance with X Render backend.
 325                                         # GLX backend is preferred.
 326 # blur-background-frame = true;         # Blur background of opaque windows with transparent
 327                                         # frames as well.
 328 blur-background-fixed = true;           # Do not let blur radius adjust based on window opacity.
 329 blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
 330                                         # Exclude conditions for background blur.
 331
 332 # Fading
 333 fading = false;                 # Fade windows during opacity changes.
 334 fade-delta = 3;         # The time between steps in a fade in milliseconds. (default 10).
 335 fade-in-step = 0.03;            # Opacity change between steps while fading in. (default 0.028).
 336 fade-out-step = 0.03;           # Opacity change between steps while fading out. (default 0.03).
 337 # no-fading-openclose = true;   # Avoid fade windows in/out when opening/closing.
 338 fade-exclude = [ ];             # Exclude conditions for fading.
 339
 340 # Other
 341 backend = "glx"                 # Backend to use: "xrender" or "glx". GLX backend is typically
 342                                 # much faster but depends on a sane driver.
 343 mark-wmwin-focused = true;      # Try to detect WM windows and mark them as active.
 344 mark-ovredir-focused = true;    # Mark all non-WM but override-redirect windows active (e.g. menus).
 345 use-ewmh-active-win = true;     # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
 346                                 # instead of using FocusIn/Out events. Usually more reliable but
 347                                 # depends on a EWMH-compliant WM.
 348 detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
 349 detect-client-opacity = true;   # Detect _NET_WM_OPACITY on client windows, useful for window
 350                                 # managers not passing _NET_WM_OPACITY of client windows to frame
 351                                 # windows.
 352 refresh-rate = 0;               # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
 353 vsync = "drm";                  # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
 354                                 # See man page for more details.
 355 dbe = false;                    # Enable DBE painting mode. Rarely needed.
 356 paint-on-overlay = true;        # Painting on X Composite overlay window. Recommended.
 357 sw-opti = false;                # Limit compton to repaint at most once every 1 / refresh_rate.
 358                                 # Incompatible with certain VSync methods.
 359 unredir-if-possible = false;    # Unredirect all windows if a full-screen opaque window is
 360                                 # detected, to maximize performance for full-screen windows.
 361 focus-exclude = [ ];            # A list of conditions of windows that should always be considered
 362                                 # focused.
 363 detect-transient = true;        # Use WM_TRANSIENT_FOR to group windows, and consider windows in
 364                                 # the same group focused at the same time.
 365 detect-client-leader = true;    # Use WM_CLIENT_LEADER to group windows.
 366 invert-color-include = [ ];     # Conditions for windows to be painted with inverted color.
 367
 368 # GLX backend                   # GLX backend fine-tune options. See man page for more info.
 369 glx-no-stencil = true;          # Recommended.
 370 glx-copy-from-front = false;    # Useful with --glx-swap-method,
 371 # glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
 372 # glx-no-rebind-pixmap = true;  # Recommended if it works.
 373 glx-no-rebind-pixmap = true;    # Recommended if it works.
 374 #glx-swap-method = "4"; # See man page.
 375 glx-swap-method = "4";  # See man page.
 376
 377 # Window type settings
 378 wintypes:
 379 {
 380   tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
 381   menu = { shadow = false; };
 382   dropdown_menu = { shadow = false; };
 383   popup_menu =  { shadow = false; };
 384   utility =  { shadow = false; };
 385   # fade: Fade the particular type of windows.
 386   # shadow: Give those windows shadow
 387   # opacity: Default opacity for the type of windows.
 388   # focus: Whether to always consider windows of this type focused.
 389 };
 390 #+end_src
 391
 392 ** dovecot
 393 :PROPERTIES:
 394 :header-args+: :tangle "/sudo::/etc/dovecot/dovecot.conf"
 395 :END:
 396
 397 #+begin_src conf
 398 protocols = imap
 399
 400 listen = 127.0.0.1
 401 log_path = /var/log/dovecot.log
 402 info_log_path = /var/log/dovecot-info.log
 403
 404 ssl = no
 405 disable_plaintext_auth = no
 406
 407 auth_verbose = yes
 408 auth_mechanisms = plain
 409
 410 passdb {
 411   driver = passwd-file
 412   args = /etc/dovecot/passwd
 413 }
 414
 415 userdb {
 416   driver = static
 417   args = uid=amin gid=amin home=/home/amin/mail/%d/%n
 418   default_fields = mail=maildir:/home/amin/mail/%d/%n/mail
 419 }
 420
 421 # mail_home = /home/amin/mail/%d/%n
 422 # mail_location = maildir:/home/amin/mail/%d/%n/mail:LAYOUT=fs:INBOX=/home/amin/mail/%d/%n/mail/Inbox
 423
 424 # namespace {
 425 #   inbox = yes
 426 #   separator = /
 427 # }
 428
 429 mail_plugins = $mail_plugins fts fts_lucene
 430
 431 plugin {
 432   fts = lucene
 433   fts_lucene = whitespace_chars=@.
 434   fts_autoindex = yes
 435 }
 436 #+end_src
 437
 438 ** Dunst
 439 :PROPERTIES:
 440 :header-args+: :tangle ~/.config/dunst/dunstrc
 441 :END:
 442
 443 #+begin_src conf
 444 [global]
 445 #font = Ubuntu Mono 10.5
 446 font = Inconsolata 11
 447
 448 # Path to default icons.
 449 icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
 450
 451 icon_position = left
 452 # <b>bold</b>
 453 # <i>italic</i>
 454 # <s>strikethrough<s/>
 455 # <u>underline</u>
 456 markup = full
 457 # The format of the message. Possible variables are:
 458 #   %a  appname
 459 #   %s  summary
 460 #   %b  body
 461 #   %i  iconname (including its path)
 462 #   %I  iconname (without its path)
 463 #   %p  progress value if set ([  0%] to [100%]) or nothing
 464 # Markup is allowed
 465 format = "<b>%s</b>\n%b"
 466 # Sort messages by urgency
 467 sort = yes
 468 # Show how many messages are currently hidden (because of geometry)
 469 indicate_hiddenl= no
 470 # Alignment of message text.
 471 # Possible values are "left", "center" and "right"
 472 alignment = center
 473 # The frequency with wich text that is longer than the notification
 474 # window allows bounces back and forth.
 475 # This option conflicts with 'word_wrap'.
 476 # Set to 0 to disable
 477 bounce_freq = 3
 478 # show age of message if message is older than show_age_threshold seconds.
 479 # set to -1 to disable
 480 show_age_threshold = -1
 481 # split notifications into multiple lines if they don't fit into geometry
 482 word_wrap = yes
 483 # ignore newlines '\n' in notifications
 484 ignore_newline = no
 485 # The geometry of the message window.
 486 # geometry [{width}]x{height}][+/-{x}+/-{y}]
 487 # The height is measured in number of notifications everything else in pixels. If the width
 488 # is omitted but the height is given ("-geometry x2"), the message window
 489 # expands over the whole screen (dmenu-like). If width is 0,
 490 # the window expands to the longest message displayed.
 491 # A positive x is measured from the left, a negative from the
 492 # right side of the screen.  Y is measured from the top and down respectevly.
 493 # The width can be negative. In this case the actual width is the
 494 # screen width minus the width defined in within the geometry option.
 495 #geometry = "410x12-12+12"
 496 #geometry = "0x0-30-30"
 497 geometry = "260x12-30-30"
 498 # The transparency of the window. range: [0; 100]
 499 # This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
 500 transparency = 0
 501 # Don't remove messages, if the user is idle (no mouse or keyboard input)
 502 # for longer than idle_threshold seconds.
 503 # Set to 0 to disable.
 504 idle_threshold = 120
 505 # Which monitor should the notifications be displayed on.
 506 monitor = 0
 507 # Display notification on focused monitor. Possible modes are:
 508 # mouse: follow mouse pointer
 509 # keyboard: follow window with keyboard focus
 510 # none: don't follow anything
 511 #
 512 # "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
 513 # This should be the case for almost all modern windowmanagers.
 514 #
 515 # If this option is set to mouse or keyboard, the monitor option will be
 516 # ignored.
 517 follow = keyboard
 518 # should a notification popped up from history be sticky or
 519 # timeout as if it would normally do.
 520 sticky_history = yes
 521 # The height of a single line. If the height is smaller than the font height,
 522 # it will get raised to the font height.
 523 # This adds empty space above and under the text.
 524 line_height = 0
 525
 526 show_indicators = yes
 527
 528 # Draw a line of 'separatpr_height' pixel height between two notifications.
 529 # Set to 0 to disable
 530 separator_height = 3
 531 # padding between text and separator
 532 padding = 8
 533 # horizontal padding
 534 horizontal_padding = 8
 535 # Define a color for the separator.
 536 # possible values are:
 537 #  * auto: dunst tries to find a color fitting to the background
 538 #  * foreground: use the same color as the foreground
 539 #  * frame: use the same color as the frame.
 540 #  * anything else will be interpreted as a X color
 541 separator_color = foreground
 542 # print a notification on startup
 543 # This is mainly for error detection, since dbus (re-)starts dunst
 544 # automatically after a crash.
 545 startup_notification = false
 546 # dmenu path
 547 #dmenu = /usr/bin/dmenu -p dunst:
 548 dmenu = /usr/bin/rofi -dmenu -p dunst:
 549 # browser for opening urls in context menu
 550 browser = /usr/bin/firefox -new-tab
 551 [frame]
 552 width = 0
 553 color = "#377222"
 554 [shortcuts]
 555 # shortcuts are specified as [modifier+][modifier+]...key
 556 # available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
 557 # and 'mod4' (windows-key)
 558 # xev might be helpful to find names for keys
 559 # close notification
 560 close = ctrl+space
 561 # close all notifications
 562 close_all = ctrl+shift+space
 563 # redisplay last message(s)
 564 # On the US keyboard layout 'grave' is normally above TAB and left of '1'.
 565 history = ctrl+shift+h
 566 # context menu
 567 context = ctrl+shift+period
 568 [urgency_low]
 569 # IMPORTANT: colors have to be defined in quotation marks.
 570 # Otherwise the '#' and following  would be interpreted as a comment.
 571 background = "#1d2a30"
 572 foreground = "#71c2af"
 573 timeout = 3
 574 [urgency_normal]
 575 background = "#1d2a30"
 576 foreground = "#71c2af"
 577 timeout = 0
 578 [urgency_critical]
 579 background = "#1d2a30"
 580 foreground = "#ff9982"
 581 timeout = 0
 582
 583 # Every section that isn't one of the above is interpreted as a rules
 584 # to override settings for certain messages.
 585 # Messages can be matched by 'appname', 'summary', 'body' or 'icon'
 586 # and you can override the 'timeout', 'urgency', 'foreground', 'background'
 587 # and 'format'.
 588 # Shell-like globbing will get expanded.
 589 #
 590 # SCRIPTING
 591 # you can specify a script that gets run when the rule matches by setting
 592 # the 'script' option.
 593 # The script will be called as follows:
 594 # script appname summary body icon urgency
 595 # where urgency can be "LOW", "NORMAL" or "CRITICAL".
 596 #
 597 # NOTE: if you don't want a notification to be displayed, set the format to ""
 598 # NOTE: It might be helpful to run dunst -print in a terminal in order to find
 599 # fitting options for rules.
 600 #[espeak]
 601 #    summary = "*"
 602 #    script = dunst_espeak.sh
 603 #[script-test]
 604 #    summary = "*script*"
 605 #    script = dunst_test.sh
 606 #[ignore]
 607 ## This notification will not be displayed
 608 #    summary = "foobar"
 609 #    format = ""
 610 #[signed_on]
 611 #    appname = Pidgin
 612 #    summary = "*signed on*"
 613 #    urgency = low
 614 #
 615 #[signed_off]
 616 #    appname = Pidgin
 617 #    summary = *signed off*
 618 #    urgency = low
 619 #
 620 #[says]
 621 #    appname = Pidgin
 622 #    summary = *says*
 623 #    urgency = critical
 624 #
 625 #[twitter]
 626 #    appname = Pidgin
 627 #    summary = *twitter.com*
 628 #    urgency = normal
 629 #
 630 [xfpm-backlight]
 631     summary = *Brightness*
 632     urgency = low
 633 #+end_src
 634
 635 ** Fontconfig
 636 :PROPERTIES:
 637 :header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
 638 :END:
 639
 640 #+begin_src xml
 641 <?xml version="1.0"?>
 642 <!DOCTYPE fontconfig SYSTEM "fonts.dtd">
 643 <fontconfig>
 644  <match target="font">
 645   <edit mode="assign" name="rgba">
 646    <const>rgb</const>
 647   </edit>
 648  </match>
 649  <match target="font">
 650   <edit mode="assign" name="hinting">
 651    <bool>true</bool>
 652   </edit>
 653  </match>
 654  <match target="font">
 655   <edit mode="assign" name="hintstyle">
 656    <const>hintslight</const>
 657   </edit>
 658  </match>
 659  <match target="font">
 660   <edit mode="assign" name="antialias">
 661    <bool>true</bool>
 662   </edit>
 663  </match>
 664  <match target="font">
 665   <edit mode="assign" name="lcdfilter">
 666    <const>lcddefault</const>
 667   </edit>
 668  </match>
 669  <dir>~/.fonts</dir>
 670
 671  <!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
 672  <alias binding="same">
 673   <family>Helvetica</family>
 674   <prefer>
 675    <family>Liberation Sans</family>
 676   </prefer>
 677 </alias>
 678 </fontconfig>
 679 #+end_src
 680
 681 ** getmail
 682
 683 *** getmailrc
 684 :PROPERTIES:
 685 :header-args+: :tangle ~/.getmail/getmailrc
 686 :END:
 687
 688 #+begin_src conf
 689 [retriever]
 690 type = SimplePOP3SSLRetriever
 691 server = fencepost.gnu.org
 692 username = bandali
 693 password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
 694 port = 995
 695 use_apop = True
 696
 697 [destination]
 698 type = Maildir
 699 path = ~/mail/gnu/Inbox/
 700
 701 [options]
 702 delete = True
 703 #+end_src
 704
 705 *** getmail.service
 706 :PROPERTIES:
 707 :header-args+: :tangle ~/.config/systemd/user/getmail.service
 708 :END:
 709
 710 #+begin_src conf :tangle no
 711 [Unit]
 712 Description=getmail service
 713
 714 [Service]
 715 Type=oneshot
 716 ExecStart=/usr/bin/getmail
 717 StandardOutput=syslog
 718 StandardError=syslog
 719 #+end_src
 720
 721 *** getmail.timer
 722 :PROPERTIES:
 723 :header-args+: :tangle ~/.config/systemd/user/getmail.timer
 724 :END:
 725
 726 #+begin_src conf :tangle no
 727 [Unit]
 728 Description=getmail timer
 729
 730 [Timer]
 731 OnCalendar=*:0/30
 732 Persistent=true
 733 Unit=getmail.service
 734
 735 [Install]
 736 WantedBy=timers.target
 737 #+end_src
 738
 739 ** Git
 740
 741 *** gitconfig
 742 :PROPERTIES:
 743 :header-args+: :tangle ~/.gitconfig
 744 :END:
 745
 746 **** user
 747 #+begin_src conf
 748 [user]
 749     name = Amin Bandali
 750     email = bandali@gnu.org
 751     signingkey = BE6273738E616D6D1B3A08E8A21A020248816103
 752 #+end_src
 753
 754 **** signing
 755 #+begin_src conf
 756 [commit]
 757     gpgsign = true
 758 # [format]
 759 #     signoff = true
 760 #+end_src
 761
 762 **** core
 763 #+begin_src conf
 764 [core]
 765     autocrlf = input  # CRLF -> LF on commit
 766     editor = emacsclient -t
 767     excludesfile = ~/.gitignore_global
 768     pager = "less"
 769 #+end_src
 770
 771 **** gpg
 772 #+begin_src conf
 773 [gpg]
 774     program = gpg2
 775 #+end_src
 776
 777 **** alias
 778 #+begin_src conf
 779 [alias]
 780     git = !exec git  # handle nested git calls, e.g. git git status
 781     aliases = config --get-regexp '^alias\\.'
 782     a = add
 783     s = status
 784     sl = status --long
 785     c = checkout
 786     cb = checkout -b
 787     b = branch
 788     r = rebase
 789     p = pull
 790     pr = pull --rebase
 791     ps = push
 792     psf = push --force
 793     nmam = "!f() { notmuch show --format=raw $1 | git am -; }; f"
 794     nmam3 = "!f() { notmuch show --format=raw $1 | git am -3 -; }; f"
 795 #+end_src
 796
 797 **** color
 798 #+begin_src conf
 799 [color]
 800     ui = auto
 801 [color "status"]
 802     added = green bold
 803     changed = red bold
 804     untracked = red bold
 805 [color "branch"]
 806     current = green bold
 807     remote = magenta bold
 808 [color "diff"]
 809     new = green bold
 810     old = red bold
 811 #+end_src
 812
 813 **** status
 814 #+begin_src conf
 815 [status]
 816     # showUntrackedFiles = all
 817     short=true
 818     branch=true
 819 #+end_src
 820
 821 **** github
 822 #+begin_src conf
 823 [github]
 824         user = aminb
 825 #+end_src
 826
 827 **** send-email
 828 #+begin_src conf
 829 [sendemail]
 830         smtpuser = bandali
 831         smtpserver = fencepost.gnu.org
 832         smtpserverport = 587
 833         smtpencryption = tls
 834         annotate = yes
 835 #+end_src
 836
 837 *** gitignore
 838 :PROPERTIES:
 839 :header-args+: :tangle ~/.gitignore_global
 840 :END:
 841
 842 #+begin_src conf
 843 *.orig
 844 *.py[co]
 845 *.sublime-workspace
 846 *~
 847 .DS_Store
 848 *.elc
 849 *-autoloads.el
 850 #+end_src
 851
 852 ** GnuPG
 853 :PROPERTIES:
 854 :header-args+: :tangle ~/.gnupg/gpg-agent.conf
 855 :END:
 856
 857 #+begin_src conf
 858 default-cache-ttl 43200
 859 max-cache-ttl 43200
 860
 861 default-cache-ttl-ssh 10800
 862 max-cache-ttl-ssh 10800
 863
 864 # pinentry-program /usr/bin/pinentry-qt
 865 #+end_src
 866
 867 ** GTK
 868
 869 *** gtk-2.0
 870 :PROPERTIES:
 871 :header-args+: :tangle ~/.gtkrc-2.0
 872 :END:
 873
 874 #+begin_src conf
 875 gtk-theme-name="Greybird"
 876 gtk-icon-theme-name="Paper"
 877 gtk-font-name="Ubuntu 10"
 878 gtk-menu-images=0
 879 # gtk-key-theme-name = "Emacs"
 880 #+end_src
 881
 882 *** gtk-3.0
 883 :PROPERTIES:
 884 :header-args+: :tangle ~/.config/gtk-3.0/settings.ini
 885 :END:
 886
 887 #+begin_src conf :tangle no
 888 [Settings]
 889 gtk-icon-theme-name = Paper
 890 # gtk-theme-name = Adwaita
 891
 892 gtk-theme-name = Greybird
 893 # gtk-theme-name = Arc-Darker
 894 # gtk-theme-name = Numix-ArchBlue
 895
 896 gtk-font-name = Ubuntu 10
 897 # gtk-key-theme-name = Emacs
 898 #+end_src
 899
 900 ** [[https://github.com/Leinnan/i3gs][i3gs]]
 901 :PROPERTIES:
 902 :header-args+: :tangle ~/.config/i3gs/config
 903 :END:
 904
 905 #+begin_src conf :comments none :tangle no
 906 borders_width=0 0 2 0
 907 separator_width=10
 908
 909 #[mpd]
 910 #preset=MPD
 911 #title=<span weight='heavy' fgcolor='#7FDBFF'> </span>
 912 #borders_color=#7FDBFF
 913
 914 [ram]
 915 preset=RAM
 916 title=<span weight='heavy' fgcolor='#3D9970'> </span>
 917 borders_color=#3D9970
 918
 919 #[cpu]
 920 #preset=CPU
 921 #title=<span weight='heavy' fgcolor='#2ECC40'> </span>
 922 #borders_color=#2ECC40
 923
 924 #[hdd]
 925 #preset=HDD
 926 #title=<span weight='heavy' fgcolor='#01FF70'> </span>
 927 #borders_color=#01FF70
 928
 929 [volume]
 930 command=volume-info
 931 title=<span weight='heavy' fgcolor='#7FDBFF'></span>
 932 borders_color=#7FDBFF
 933
 934 [battery]
 935 preset=BAT
 936 command=battery-percentage-time
 937 title=<span weight='heavy' fgcolor='#39CCCC'> </span>
 938 borders_color=#39CCCC
 939
 940 [wifi]
 941 preset=WIFI
 942 title=<span weight='heavy' fgcolor='#01FF70'> </span>
 943 borders_color=#01FF70
 944
 945 [date]
 946 preset=DATE
 947 command=date '+%-I:%M, %a %b %d '
 948 title=<span weight='heavy' fgcolor='#FFDC00'> </span>
 949 borders_color=#FFDC00
 950 separator_width=0
 951 #+end_src
 952
 953 ** i3status
 954 :PROPERTIES:
 955 :header-args+: :tangle ~/.config/i3status/config
 956 :END:
 957
 958 #+begin_src conf :comments none
 959 # i3status configuration file.
 960 # see "man i3status" for documentation.
 961
 962 # It is important that this file is edited as UTF-8.
 963 # The following line should contain a sharp s:
 964 # ß
 965 # If the above line is not correctly displayed, fix your editor first!
 966
 967 general {
 968         colors = true
 969         interval = 5
 970         output_format = "i3bar"
 971 }
 972
 973 # order += "ipv6"
 974 order += "disk /"
 975 order += "disk /data"
 976 order += "wireless _first_"
 977 order += "ethernet _first_"
 978 order += "battery 0"
 979 order += "volume master"
 980 order += "load"
 981 order += "tztime local"
 982
 983 wireless _first_ {
 984         format_up = "W:%quality %essid %ip"
 985         format_down = "W: down"
 986 }
 987
 988 ethernet _first_ {
 989         # if you use %speed, i3status requires root privileges
 990         format_up = "E: %ip (%speed)"
 991         format_down = "E: down"
 992 }
 993
 994 battery 0 {
 995         format = "%status %percentage %remaining (%consumption)"
 996         path = "/sys/class/power_supply/BAT%d/uevent"
 997         low_threshold = "10"
 998         threshold_type = "percentage"
 999         last_full_capacity = true
1000         integer_battery_capacity = true
1001         hide_seconds = true
1002 }
1003
1004 tztime local {
1005         format = "%-I:%M%P %a %b %d"
1006 }
1007
1008 volume master {
1009         format = "♪ %volume"
1010         format_muted = "🔇 %volume"
1011         device = "pulse"
1012 }
1013
1014 load {
1015         format = "%1min"
1016 }
1017
1018 disk "/" {
1019         format = "/ %avail"
1020 }
1021
1022 disk "/data" {
1023         format = "/data %avail"
1024 }
1025 #+end_src
1026
1027 ** isync
1028
1029 *** mbsyncrc
1030 :PROPERTIES:
1031 :header-args+: :tangle ~/.mbsyncrc
1032 :END:
1033
1034 #+begin_src conf
1035 # Global defaults
1036 CopyArrivalDate yes
1037 Create Both
1038 Expunge Both
1039
1040 ######
1041 IMAPAccount amin
1042 Host mail.aminb.org
1043 User amin@aminb.org
1044 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
1045 SSLType IMAPS
1046
1047 IMAPStore amin-remote
1048 Account amin
1049
1050 IMAPAccount amin-dovecot
1051 Host 127.0.0.1
1052 Port 143
1053 User amin@aminb.org
1054 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin-dovecot.gpg"
1055 SSLType None
1056
1057 IMAPStore amin-local
1058 Account amin-dovecot
1059
1060 Channel amin
1061 Master :amin-remote:
1062 Slave :amin-local:
1063 Patterns *
1064
1065 ######
1066 IMAPAccount uwaterloo
1067 Host connect.uwaterloo.ca
1068 User abandali
1069 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
1070 SSLType IMAPS
1071
1072 IMAPStore uwaterloo-remote
1073 Account uwaterloo
1074
1075 IMAPAccount uwaterloo-dovecot
1076 Host 127.0.0.1
1077 Port 143
1078 User abandali@uwaterloo.ca
1079 PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo-dovecot.gpg"
1080 SSLType None
1081
1082 IMAPStore uwaterloo-local
1083 Account uwaterloo-dovecot
1084
1085 Channel uwaterloo
1086 Master :uwaterloo-remote:
1087 Slave :uwaterloo-local:
1088 Patterns *
1089 #+end_src
1090
1091 *** mbsync.service
1092 :PROPERTIES:
1093 :header-args+: :tangle ~/.config/systemd/user/mbsync.service
1094 :END:
1095
1096 #+begin_src conf :tangle no
1097 [Unit]
1098 Description=mbsync service
1099
1100 [Service]
1101 Type=oneshot
1102 ExecStart=/usr/bin/mbsync -Va
1103 StandardOutput=syslog
1104 StandardError=syslog
1105 #+end_src
1106
1107 *** mbsync.timer
1108 :PROPERTIES:
1109 :header-args+: :tangle ~/.config/systemd/user/mbsync.timer
1110 :END:
1111
1112 #+begin_src conf :tangle no
1113 [Unit]
1114 Description=mbsync timer
1115
1116 [Timer]
1117 OnCalendar=*:0/15
1118 Persistent=true
1119 Unit=mbsync.service
1120
1121 [Install]
1122 WantedBy=timers.target
1123 #+end_src
1124
1125 ** Latexmk
1126 :PROPERTIES:
1127 :header-args+: :tangle ~/.latexmkrc
1128 :END:
1129
1130 #+begin_src conf
1131 $pdf_previewer = "start zathura %O %S";
1132 $clean_ext = "aux out";
1133
1134 # $pdf_update_method = 4;
1135 # $pdf_update_command = "zathura %O %S";
1136
1137 # Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
1138 # by Ctrl+click in the PDF.
1139 # Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
1140 # editor.
1141 # $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
1142 #+end_src
1143
1144 ** libinput
1145
1146 Improve XPS 15 9560's touchpad experience.
1147
1148 # begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "plasma")) "/sudo::/etc/X11/xorg.conf.d/30-touchpad.conf")
1149 #+begin_src conf :tangle no
1150 Section "InputClass"
1151     Identifier "libinput touchpad catchall"
1152     Driver "libinput"
1153     MatchIsTouchpad "on"
1154     Option "ClickMethod" "clickfinger"
1155     Option "NaturalScrolling" "true"
1156     Option "Tapping" "on"
1157     Option "TappingButtonMap" "lrm"
1158 EndSection
1159 #+end_src
1160
1161 ** mpd
1162 :PROPERTIES:
1163 :header-args+: :tangle ~/.config/mpd/mpd.conf
1164 :END:
1165
1166 #+begin_src conf
1167 # An example configuration file for MPD.
1168 # Read the user manual for documentation: http://www.musicpd.org/doc/user/
1169
1170
1171 # Files and directories #######################################################
1172 #
1173 # This setting controls the top directory which MPD will search to discover the
1174 # available audio files and add them to the daemon's online database. This
1175 # setting defaults to the XDG directory, otherwise the music directory will be
1176 # be disabled and audio files will only be accepted over ipc socket (using
1177 # file:// protocol) or streaming files over an accepted protocol.
1178 #
1179 music_directory         "~/usr/music"
1180 #
1181 # This setting sets the MPD internal playlist directory. The purpose of this
1182 # directory is storage for playlists created by MPD. The server will use
1183 # playlist files not created by the server but only if they are in the MPD
1184 # format. This setting defaults to playlist saving being disabled.
1185 #
1186 playlist_directory              "~/.mpd/playlists"
1187 #
1188 # This setting sets the location of the MPD database. This file is used to
1189 # load the database at server start up and store the database while the
1190 # server is not up. This setting defaults to disabled which will allow
1191 # MPD to accept files over ipc socket (using file:// protocol) or streaming
1192 # files over an accepted protocol.
1193 #
1194 db_file                 "~/.mpd/database"
1195 #
1196 # These settings are the locations for the daemon log files for the daemon.
1197 # These logs are great for troubleshooting, depending on your log_level
1198 # settings.
1199 #
1200 # The special value "syslog" makes MPD use the local syslog daemon. This
1201 # setting defaults to logging to syslog, otherwise logging is disabled.
1202 #
1203 log_file                        "~/.mpd/log"
1204 #
1205 # This setting sets the location of the file which stores the process ID
1206 # for use of mpd --kill and some init scripts. This setting is disabled by
1207 # default and the pid file will not be stored.
1208 #
1209 pid_file                        "~/.mpd/pid"
1210 #
1211 # This setting sets the location of the file which contains information about
1212 # most variables to get MPD back into the same general shape it was in before
1213 # it was brought down. This setting is disabled by default and the server
1214 # state will be reset on server start up.
1215 #
1216 state_file                      "~/.mpd/state"
1217 #
1218 # The location of the sticker database.  This is a database which
1219 # manages dynamic information attached to songs.
1220 #
1221 sticker_file                    "~/.mpd/sticker.sql"
1222 #
1223 ###############################################################################
1224
1225
1226 # General music daemon options ################################################
1227 #
1228 # This setting specifies the user that MPD will run as. MPD should never run as
1229 # root and you may use this setting to make MPD change its user ID after
1230 # initialization. This setting is disabled by default and MPD is run as the
1231 # current user.
1232 #
1233 #user                           "nobody"
1234 #
1235 # This setting specifies the group that MPD will run as. If not specified
1236 # primary group of user specified with "user" setting will be used (if set).
1237 # This is useful if MPD needs to be a member of group such as "audio" to
1238 # have permission to use sound card.
1239 #
1240 #group                          "nogroup"
1241 #
1242 # This setting sets the address for the daemon to listen on. Careful attention
1243 # should be paid if this is assigned to anything other then the default, any.
1244 # This setting can deny access to control of the daemon. Not effective if
1245 # systemd socket activiation is in use.
1246 #
1247 # For network
1248 #bind_to_address                "any"
1249 #
1250 # And for Unix Socket
1251 #bind_to_address                "~/.mpd/socket"
1252 #
1253 # This setting is the TCP port that is desired for the daemon to get assigned
1254 # to.
1255 #
1256 #port                           "6600"
1257 #
1258 # This setting controls the type of information which is logged. Available
1259 # setting arguments are "default", "secure" or "verbose". The "verbose" setting
1260 # argument is recommended for troubleshooting, though can quickly stretch
1261 # available resources on limited hardware storage.
1262 #
1263 #log_level                      "default"
1264 #
1265 # If you have a problem with your MP3s ending abruptly it is recommended that
1266 # you set this argument to "no" to attempt to fix the problem. If this solves
1267 # the problem, it is highly recommended to fix the MP3 files with vbrfix
1268 # (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
1269 # point gapless MP3 playback can be enabled.
1270 #
1271 #gapless_mp3_playback                   "yes"
1272 #
1273 # Setting "restore_paused" to "yes" puts MPD into pause mode instead
1274 # of starting playback after startup.
1275 #
1276 #restore_paused "no"
1277 #
1278 # This setting enables MPD to create playlists in a format usable by other
1279 # music players.
1280 #
1281 #save_absolute_paths_in_playlists       "no"
1282 #
1283 # This setting defines a list of tag types that will be extracted during the
1284 # audio file discovery process. The complete list of possible values can be
1285 # found in the user manual.
1286 #metadata_to_use        "artist,album,title,track,name,genre,date,composer,performer,disc"
1287 #
1288 # This setting enables automatic update of MPD's database when files in
1289 # music_directory are changed.
1290 #
1291 #auto_update    "yes"
1292 #
1293 # Limit the depth of the directories being watched, 0 means only watch
1294 # the music directory itself.  There is no limit by default.
1295 #
1296 #auto_update_depth "3"
1297 #
1298 ###############################################################################
1299
1300
1301 # Symbolic link behavior ######################################################
1302 #
1303 # If this setting is set to "yes", MPD will discover audio files by following
1304 # symbolic links outside of the configured music_directory.
1305 #
1306 #follow_outside_symlinks        "yes"
1307 #
1308 # If this setting is set to "yes", MPD will discover audio files by following
1309 # symbolic links inside of the configured music_directory.
1310 #
1311 #follow_inside_symlinks         "yes"
1312 #
1313 ###############################################################################
1314
1315
1316 # Zeroconf / Avahi Service Discovery ##########################################
1317 #
1318 # If this setting is set to "yes", service information will be published with
1319 # Zeroconf / Avahi.
1320 #
1321 #zeroconf_enabled               "yes"
1322 #
1323 # The argument to this setting will be the Zeroconf / Avahi unique name for
1324 # this MPD server on the network.
1325 #
1326 #zeroconf_name                  "Music Player"
1327 #
1328 ###############################################################################
1329
1330
1331 # Permissions #################################################################
1332 #
1333 # If this setting is set, MPD will require password authorization. The password
1334 # setting can be specified multiple times for different password profiles.
1335 #
1336 #password                        "password@read,add,control,admin"
1337 #
1338 # This setting specifies the permissions a user has who has not yet logged in.
1339 #
1340 #default_permissions             "read,add,control,admin"
1341 #
1342 ###############################################################################
1343
1344
1345 # Database #######################################################################
1346 #
1347
1348 #database {
1349 #       plugin "proxy"
1350 #       host "other.mpd.host"
1351 #       port "6600"
1352 #}
1353
1354 # Input #######################################################################
1355 #
1356
1357 input {
1358         plugin "curl"
1359 #       proxy "proxy.isp.com:8080"
1360 #       proxy_user "user"
1361 #       proxy_password "password"
1362 }
1363
1364 #
1365 ###############################################################################
1366
1367 # Audio Output ################################################################
1368 #
1369
1370 audio_output {
1371     type    "pulse"
1372     name    "pulse audio"
1373 }
1374
1375 audio_output {
1376     type    "fifo"
1377     name    "my_fifo"
1378     path    "/tmp/mpd.fifo"
1379     format  "44100:16:2"
1380 }
1381
1382 # MPD supports various audio output types, as well as playing through multiple
1383 # audio outputs at the same time, through multiple audio_output settings
1384 # blocks. Setting this block is optional, though the server will only attempt
1385 # autodetection for one sound card.
1386 #
1387 # An example of an ALSA output:
1388 #
1389 #audio_output {
1390 #       type            "alsa"
1391 #       name            "My ALSA Device"
1392 ##      device          "hw:0,0"        # optional
1393 ##      mixer_type      "hardware"      # optional
1394 ##      mixer_device    "default"       # optional
1395 ##      mixer_control   "PCM"           # optional
1396 ##      mixer_index     "0"             # optional
1397 #}
1398 #
1399 # An example of an OSS output:
1400 #
1401 #audio_output {
1402 #       type            "oss"
1403 #       name            "My OSS Device"
1404 ##      device          "/dev/dsp"      # optional
1405 ##      mixer_type      "hardware"      # optional
1406 ##      mixer_device    "/dev/mixer"    # optional
1407 ##      mixer_control   "PCM"           # optional
1408 #}
1409 #
1410 # An example of a shout output (for streaming to Icecast):
1411 #
1412 #audio_output {
1413 #       type            "shout"
1414 #       encoder         "vorbis"                # optional
1415 #       name            "My Shout Stream"
1416 #       host            "localhost"
1417 #       port            "8000"
1418 #       mount           "/mpd.ogg"
1419 #       password        "hackme"
1420 #       quality         "5.0"
1421 #       bitrate         "128"
1422 #       format          "44100:16:1"
1423 ##      protocol        "icecast2"              # optional
1424 ##      user            "source"                # optional
1425 ##      description     "My Stream Description" # optional
1426 ##      url             "http://example.com"    # optional
1427 ##      genre           "jazz"                  # optional
1428 ##      public          "no"                    # optional
1429 ##      timeout         "2"                     # optional
1430 ##      mixer_type      "software"              # optional
1431 #}
1432 #
1433 # An example of a recorder output:
1434 #
1435 #audio_output {
1436 #       type            "recorder"
1437 #       name            "My recorder"
1438 #       encoder         "vorbis"                # optional, vorbis or lame
1439 #       path            "/var/lib/mpd/recorder/mpd.ogg"
1440 ##      quality         "5.0"                   # do not define if bitrate is defined
1441 #       bitrate         "128"                   # do not define if quality is defined
1442 #       format          "44100:16:1"
1443 #}
1444 #
1445 # An example of a httpd output (built-in HTTP streaming server):
1446 #
1447 #audio_output {
1448 #       type            "httpd"
1449 #       name            "My HTTP Stream"
1450 #       encoder         "vorbis"                # optional, vorbis or lame
1451 #       port            "8000"
1452 #       bind_to_address "0.0.0.0"               # optional, IPv4 or IPv6
1453 ##      quality         "5.0"                   # do not define if bitrate is defined
1454 #       bitrate         "128"                   # do not define if quality is defined
1455 #       format          "44100:16:1"
1456 #       max_clients     "0"                     # optional 0=no limit
1457 #}
1458 #
1459 # An example of a pulseaudio output (streaming to a remote pulseaudio server)
1460 #
1461 #audio_output {
1462 #       type            "pulse"
1463 #       name            "My Pulse Output"
1464 ##      server          "remote_server"         # optional
1465 ##      sink            "remote_server_sink"    # optional
1466 #}
1467 #
1468 # An example of a winmm output (Windows multimedia API).
1469 #
1470 #audio_output {
1471 #       type            "winmm"
1472 #       name            "My WinMM output"
1473 ##      device          "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1474 #               or
1475 ##      device          "0"             # optional
1476 ##      mixer_type      "hardware"      # optional
1477 #}
1478 #
1479 # An example of an openal output.
1480 #
1481 #audio_output {
1482 #       type            "openal"
1483 #       name            "My OpenAL output"
1484 ##      device          "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
1485 #}
1486 #
1487 # An example of an sndio output.
1488 #
1489 #audio_output {
1490 #       type            "sndio"
1491 #       name            "sndio output"
1492 #       mixer_type      "software"
1493 #}
1494 #
1495 # An example of an OS X output:
1496 #
1497 #audio_output {
1498 #       type            "osx"
1499 #       name            "My OS X Device"
1500 ##      device          "Built-in Output"       # optional
1501 ##      channel_map      "-1,-1,0,1"    # optional
1502 #}
1503 #
1504 ## Example "pipe" output:
1505 #
1506 #audio_output {
1507 #       type            "pipe"
1508 #       name            "my pipe"
1509 #       command         "aplay -f cd 2>/dev/null"
1510 ## Or if you're want to use AudioCompress
1511 #       command         "AudioCompress -m | aplay -f cd 2>/dev/null"
1512 ## Or to send raw PCM stream through PCM:
1513 #       command         "nc example.org 8765"
1514 #       format          "44100:16:2"
1515 #}
1516 #
1517 ## An example of a null output (for no audio output):
1518 #
1519 #audio_output {
1520 #       type            "null"
1521 #       name            "My Null Output"
1522 #       mixer_type      "none"                  # optional
1523 #}
1524 #
1525 ###############################################################################
1526
1527
1528 # Normalization automatic volume adjustments ##################################
1529 #
1530 # This setting specifies the type of ReplayGain to use. This setting can have
1531 # the argument "off", "album", "track" or "auto". "auto" is a special mode that
1532 # chooses between "track" and "album" depending on the current state of
1533 # random playback. If random playback is enabled then "track" mode is used.
1534 # See <http://www.replaygain.org> for more details about ReplayGain.
1535 # This setting is off by default.
1536 #
1537 #replaygain                     "album"
1538 #
1539 # This setting sets the pre-amp used for files that have ReplayGain tags. By
1540 # default this setting is disabled.
1541 #
1542 #replaygain_preamp              "0"
1543 #
1544 # This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
1545 # By default this setting is disabled.
1546 #
1547 #replaygain_missing_preamp      "0"
1548 #
1549 # This setting enables or disables ReplayGain limiting.
1550 # MPD calculates actual amplification based on the ReplayGain tags
1551 # and replaygain_preamp / replaygain_missing_preamp setting.
1552 # If replaygain_limit is enabled MPD will never amplify audio signal
1553 # above its original level. If replaygain_limit is disabled such amplification
1554 # might occur. By default this setting is enabled.
1555 #
1556 #replaygain_limit               "yes"
1557 #
1558 # This setting enables on-the-fly normalization volume adjustment. This will
1559 # result in the volume of all playing audio to be adjusted so the output has
1560 # equal "loudness". This setting is disabled by default.
1561 #
1562 #volume_normalization           "no"
1563 #
1564 ###############################################################################
1565
1566 # Character Encoding ##########################################################
1567 #
1568 # If file or directory names do not display correctly for your locale then you
1569 # may need to modify this setting.
1570 #
1571 #filesystem_charset             "UTF-8"
1572 #
1573 ###############################################################################
1574 #+end_src
1575
1576 ** msmtp
1577 :PROPERTIES:
1578 :header-args+: :tangle ~/.msmtprc
1579 :END:
1580
1581 #+begin_src conf
1582 # Set default values for all following accounts.
1583 defaults
1584 port 587
1585 tls on
1586 auth on
1587 #tls_trust_file /etc/ssl/certs/ca-certificates.crt
1588 logfile ~/.msmtp.log
1589
1590 # aminb
1591 account aminb
1592 host mail.aminb.org
1593 # use `msmtp -a aminb --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1594 tls_fingerprint C7:A4:2E:A3:11:FA:80:45:C4:29:D6:62:4D:73:DB:34:43:67:8F:16:F1:2E:54:43:06:1B:41:B6:A9:09:E0:37
1595 tls_starttls on
1596 from amin@aminb.org
1597 user amin@aminb.org
1598 passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
1599
1600 # gnu
1601 account gnu
1602 host fencepost.gnu.org
1603 # use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
1604 tls_fingerprint 93:59:52:1D:A6:95:13:31:7C:81:ED:DB:A5:BA:B5:2B:C8:BC:38:3E:71:A5:DF:8C:80:46:C1:E0:5D:2D:F4:E3
1605 tls_starttls on
1606 from bandali@gnu.org
1607 user bandali
1608 passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
1609
1610 # gnu (old)
1611 account gnu-aminb : gnu
1612 from aminb@gnu.org
1613 account gnu-amin : gnu
1614 from amin@gnu.org
1615 account gnu-mab : gnu
1616 from mab@gnu.org
1617
1618 # uwaterloo
1619 account uwaterloo
1620 host connect.uwaterloo.ca
1621 tls_starttls on
1622 from abandali@uwaterloo.ca
1623 user abandali
1624 passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
1625 tls_trust_file /etc/ssl/certs/ca-certificates.crt
1626
1627 # Set a default account
1628 account default : aminb
1629 #+end_src
1630
1631 ** ncmpcpp
1632
1633 *** config
1634 :PROPERTIES:
1635 :header-args+: :tangle ~/.ncmpcpp/config
1636 :END:
1637
1638 #+begin_src conf :tangle no
1639 ##############################################################
1640 ## This is the example configuration file. Copy it to       ##
1641 ## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
1642 ## and set up your preferences.                             ##
1643 ##############################################################
1644 #
1645 ##### directories ######
1646 ##
1647 ## Directory for storing ncmpcpp related files.
1648 ## Changing it is useful if you want to store
1649 ## everything somewhere else and provide command
1650 ## line setting for alternative location to config
1651 ## file which defines that while launching ncmpcpp.
1652 ##
1653 #
1654 ncmpcpp_directory = ~/.ncmpcpp
1655 #
1656 ##
1657 ## Directory for storing downloaded lyrics. It
1658 ## defaults to ~/.lyrics since other MPD clients
1659 ## (eg. ncmpc) also use that location.
1660 ##
1661 #
1662 #lyrics_directory = ~/.lyrics
1663 #
1664 ##### connection settings #####
1665 #
1666 #mpd_host = localhost
1667 #
1668 #mpd_port = 6600
1669 #
1670 #mpd_connection_timeout = 5
1671 #
1672 ## Needed for tag editor and file operations to work.
1673 ##
1674 mpd_music_dir = ~/usr/music
1675 #
1676 #mpd_crossfade_time = 5
1677 #
1678 ##### music visualizer #####
1679 ##
1680 ## Note: In order to make music visualizer work you'll
1681 ## need to use mpd fifo output, whose format parameter
1682 ## has to be set to 44100:16:1 for mono visualization
1683 ## or 44100:16:2 for stereo visualization. Example
1684 ## configuration (it has to be put into mpd.conf):
1685 ##
1686 ## audio_output {
1687 ##        type            "fifo"
1688 ##        name            "Visualizer feed"
1689 ##        path            "/tmp/mpd.fifo"
1690 ##        format          "44100:16:2"
1691 ## }
1692 ##
1693 #
1694 visualizer_fifo_path = /tmp/mpd.fifo
1695 #
1696 ##
1697 ## Note: Below parameter is needed for ncmpcpp
1698 ## to determine which output provides data for
1699 ## visualizer and thus allow syncing between
1700 ## visualization and sound as currently there
1701 ## are some problems with it.
1702 ##
1703 #
1704 visualizer_output_name = my fifo
1705 #
1706 ##
1707 ## If you set format to 44100:16:2, make it 'yes'.
1708 ##
1709 visualizer_in_stereo = yes
1710 #
1711 ##
1712 ## Multiply received samples by given value. Very
1713 ## useful for proper visualization of quiet music.
1714 ##
1715 #visualizer_sample_multiplier = 1
1716 #
1717 ##
1718 ## Note: Below parameter defines how often ncmpcpp
1719 ## has to "synchronize" visualizer and audio outputs.
1720 ## 30 seconds is optimal value, but if you experience
1721 ## synchronization problems, set it to lower value.
1722 ## Keep in mind that sane values start with >=10.
1723 ##
1724 #
1725 visualizer_sync_interval = 30
1726 #
1727 ##
1728 ## Note: To enable spectrum frequency visualization
1729 ## you need to compile ncmpcpp with fftw3 support.
1730 ##
1731 #
1732 ## Available values: spectrum, wave, wave_filled, ellipse.
1733 ##
1734 visualizer_type = spectrum
1735 #
1736 #visualizer_look = ●▮
1737 visualizer_look = "●•"
1738 #
1739 #visualizer_color = blue, cyan, green, yellow, magenta, red
1740 #
1741 ## Alternative subset of 256 colors for terminals that support it.
1742 ##
1743 #visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
1744 #
1745 ##### system encoding #####
1746 ##
1747 ## ncmpcpp should detect your charset encoding
1748 ## but if it failed to do so, you can specify
1749 ## charset encoding you are using here.
1750 ##
1751 ## Note: You can see whether your ncmpcpp build
1752 ## supports charset detection by checking output
1753 ## of `ncmpcpp --version`.
1754 ##
1755 ## Note: Since MPD uses UTF-8 by default, setting
1756 ## this option makes sense only if your encoding
1757 ## is different.
1758 ##
1759 #
1760 #system_encoding = ""
1761 #
1762 ##### delays #####
1763 #
1764 ## Time of inactivity (in seconds) after playlist
1765 ## highlighting will be disabled (0 = always on).
1766 ##
1767 #playlist_disable_highlight_delay = 5
1768 #
1769 ## Defines how long messages are supposed to be visible.
1770 ##
1771 #message_delay_time = 5
1772 #
1773 ##### song format #####
1774 ##
1775 ## For a song format you can use:
1776 ##
1777 ## %l - length
1778 ## %f - filename
1779 ## %D - directory
1780 ## %a - artist
1781 ## %A - album artist
1782 ## %t - title
1783 ## %b - album
1784 ## %y - date
1785 ## %n - track number (01/12 -> 01)
1786 ## %N - full track info (01/12 -> 01/12)
1787 ## %g - genre
1788 ## %c - composer
1789 ## %p - performer
1790 ## %d - disc
1791 ## %C - comment
1792 ## %P - priority
1793 ## $R - begin right alignment
1794 ##
1795 ## If you want to make sure that a part of the format is displayed
1796 ## only when certain tags are present, you can archieve it by
1797 ## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
1798 ## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
1799 ## It is also possible to define a list of alternatives by providing
1800 ## several groups and separating them with '|', e.g. '{%t}|{%f}'
1801 ## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
1802 ## present.
1803 ##
1804 ## Note: If you want to set limit on maximal length of a tag, just
1805 ## put the appropriate number between % and character that defines
1806 ## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
1807 ##
1808 ## In addition, formats support markers used for text attributes.
1809 ## They are followed by character '$'. After that you can put:
1810 ##
1811 ## - 0 - default window color (discards all other colors)
1812 ## - 1 - black
1813 ## - 2 - red
1814 ## - 3 - green
1815 ## - 4 - yellow
1816 ## - 5 - blue
1817 ## - 6 - magenta
1818 ## - 7 - cyan
1819 ## - 8 - white
1820 ## - 9 - end of current color
1821 ## - b - bold text
1822 ## - u - underline text
1823 ## - r - reverse colors
1824 ## - a - use alternative character set
1825 ##
1826 ## If you don't want to use a non-color attribute anymore, just put it
1827 ## again, but this time insert character '/' between '$' and attribute
1828 ## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
1829 ## or filename with reversed colors.
1830 ##
1831 ## If you want to use 256 colors and/or background colors in formats
1832 ## (the naming scheme is described below in section about color
1833 ## definitions), it can be done with the syntax $(COLOR), e.g. to set
1834 ## the artist tag to one of the non-standard colors and make it have
1835 ## yellow background, you need to write $(197_yellow)%a$(end). Note
1836 ## that for standard colors this is interchangable with attributes
1837 ## listed above.
1838 ##
1839 ## Note: colors can be nested.
1840 ##
1841 #
1842 #song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
1843 #
1844 #song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
1845 #
1846 #song_library_format = {%n - }{%t}|{%f}
1847 #
1848 #
1849 #alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
1850 #
1851 #alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
1852 #
1853 #now_playing_prefix = $b
1854 #
1855 #now_playing_suffix = $/b
1856 #
1857 #browser_playlist_prefix = "$2playlist$9 "
1858 #
1859 #selected_item_prefix = $6
1860 #
1861 #selected_item_suffix = $9
1862 #
1863 #modified_item_prefix = $3> $9
1864 #
1865 ##
1866 ## Note: attributes are not supported for the following variables.
1867 ##
1868 #song_window_title_format = {%a - }{%t}|{%f}
1869 ##
1870 ## Note: Below variables are used for sorting songs in browser.
1871 ## The sort mode determines how songs are sorted, and can be used
1872 ## in combination with a sort format to specify a custom sorting format.
1873 ## Available values for browser_sort_mode are "name", "mtime", "format"
1874 ## and "noop".
1875 ##
1876 #
1877 #browser_sort_mode = name
1878 #
1879 #browser_sort_format = {%a - }{%t}|{%f} {(%l)}
1880 #
1881 ##### columns settings #####
1882 ##
1883 ## syntax of song columns list format is "column column etc."
1884 ##
1885 ## - syntax for each column is:
1886 ##
1887 ## (width of the column)[color of the column]{displayed tag}
1888 ##
1889 ## Note: Width is by default in %, if you want a column to
1890 ## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
1891 ## will be the column that take 10% of screen (so the real width
1892 ## will depend on actual screen size), whereas (10f)[white]{a}
1893 ## will take 10 terminal cells, no matter how wide the screen is.
1894 ##
1895 ## - color is optional (if you want the default one,
1896 ##   leave the field empty).
1897 ##
1898 ## Note: You can give a column additional attributes by putting appropriate
1899 ## character after displayed tag character. Available attributes are:
1900 ##
1901 ## - r - column will be right aligned
1902 ## - E - if tag is empty, empty tag marker won't be displayed
1903 ##
1904 ## You can also:
1905 ##
1906 ## - give a column custom name by putting it after attributes,
1907 ##   separated with character ':', e.g. {lr:Length} gives you
1908 ##   right aligned column of lengths named "Length".
1909 ##
1910 ## - define sequence of tags, that have to be displayed in case
1911 ##   predecessor is empty in a way similar to the one in classic
1912 ##   song format, i.e. using '|' character, e.g. {a|c|p:Owner}
1913 ##   creates column named "Owner" that tries to display artist
1914 ##   tag and then composer and performer if previous ones are
1915 ##   not available.
1916 ##
1917 #
1918 #song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
1919 #
1920 ##### various settings #####
1921 #
1922 ##
1923 ## Note: Custom command that will be executed each
1924 ## time song changes. Useful for notifications etc.
1925 ##
1926 #execute_on_song_change = ""
1927 #
1928 #playlist_show_mpd_host = no
1929 #
1930 #playlist_show_remaining_time = no
1931 #
1932 #playlist_shorten_total_times = no
1933 #
1934 #playlist_separate_albums = no
1935 #
1936 ##
1937 ## Note: Possible display modes: classic, columns.
1938 ##
1939 #playlist_display_mode = columns
1940 #
1941 #browser_display_mode = classic
1942 #
1943 #search_engine_display_mode = classic
1944 #
1945 #playlist_editor_display_mode = classic
1946 #
1947 #discard_colors_if_item_is_selected = yes
1948 #
1949 #incremental_seeking = yes
1950 #
1951 #seek_time = 1
1952 #
1953 #volume_change_step = 2
1954 #
1955 #autocenter_mode = no
1956 #
1957 #centered_cursor = no
1958 #
1959 ##
1960 ## Note: You can specify third character which will
1961 ## be used to build 'empty' part of progressbar.
1962 ##
1963 #progressbar_look = =>
1964 progressbar_look = "─╼╶"
1965 #progressbar_look = "─⊙╶"
1966 #
1967 #progressbar_boldness = yes
1968 #
1969 ## Available values: database, playlist.
1970 ##
1971 #default_place_to_search_in = database
1972 #
1973 ## Available values: classic, alternative.
1974 ##
1975 #user_interface = classic
1976 #
1977 #data_fetching_delay = yes
1978 #
1979 ## Available values: artist, album_artist, date, genre, composer, performer.
1980 ##
1981 #media_library_primary_tag = artist
1982 #
1983 ## Available values: wrapped, normal.
1984 ##
1985 #default_find_mode = wrapped
1986 #
1987 #default_tag_editor_pattern = %n - %t
1988 #
1989 #header_visibility = yes
1990 #
1991 #statusbar_visibility = yes
1992 #
1993 #titles_visibility = yes
1994 #
1995 #header_text_scrolling = yes
1996 #
1997 #cyclic_scrolling = no
1998 #
1999 #lines_scrolled = 2
2000 #
2001 #follow_now_playing_lyrics = no
2002 #
2003 #fetch_lyrics_for_current_song_in_background = no
2004 #
2005 #store_lyrics_in_song_dir = no
2006 #
2007 #generate_win32_compatible_filenames = yes
2008 #
2009 #allow_for_physical_item_deletion = no
2010 #
2011 ##
2012 ## Note: If you set this variable, ncmpcpp will try to
2013 ## get info from last.fm in language you set and if it
2014 ## fails, it will fall back to english. Otherwise it will
2015 ## use english the first time.
2016 ##
2017 ## Note: Language has to be expressed as an ISO 639 alpha-2 code.
2018 ##
2019 #lastfm_preferred_language = en
2020 #
2021 #show_hidden_files_in_local_browser = no
2022 #
2023 ##
2024 ## How shall screen switcher work?
2025 ##
2026 ## - "previous" - switch between the current and previous screen.
2027 ## - "screen1,...,screenN" - switch between given sequence of screens.
2028 ##
2029 ## Screens available for use: help, playlist, browser, search_engine,
2030 ## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
2031 ##
2032 #screen_switcher_mode = playlist, browser
2033 #
2034 ##
2035 ## Note: You can define startup screen
2036 ## by choosing screen from the list above.
2037 ##
2038 #startup_screen = playlist
2039 #
2040 ##
2041 ## Note: You can define startup slave screen
2042 ## by choosing screen from the list above or
2043 ## an empty value for no slave screen.
2044 ##
2045 #startup_slave_screen = ""
2046 #
2047 #startup_slave_screen_focus = no
2048 #
2049 ##
2050 ## Default width of locked screen (in %).
2051 ## Acceptable values are from 20 to 80.
2052 ##
2053 #
2054 #locked_screen_width_part = 50
2055 #
2056 #ask_for_locked_screen_width_part = yes
2057 #
2058 #jump_to_now_playing_song_at_start = yes
2059 #
2060 #ask_before_clearing_playlists = yes
2061 #
2062 #clock_display_seconds = no
2063 #
2064 #display_volume_level = yes
2065 #
2066 #display_bitrate = no
2067 #
2068 #display_remaining_time = no
2069 #
2070 ## Available values: none, basic, extended, perl.
2071 ##
2072 #regular_expressions = perl
2073 #
2074 ##
2075 ## Note: If below is enabled, ncmpcpp will ignore leading
2076 ## "The" word while sorting items in browser, tags in
2077 ## media library, etc.
2078 ##
2079 #ignore_leading_the = no
2080 #
2081 #block_search_constraints_change_if_items_found = yes
2082 #
2083 #mouse_support = yes
2084 #
2085 #mouse_list_scroll_whole_page = yes
2086 #
2087 #empty_tag_marker = <empty>
2088 #
2089 #tags_separator = " | "
2090 #
2091 #tag_editor_extended_numeration = no
2092 #
2093 #media_library_sort_by_mtime = no
2094 #
2095 #enable_window_title = yes
2096 #
2097 ##
2098 ## Note: You can choose default search mode for search
2099 ## engine. Available modes are:
2100 ##
2101 ## - 1 - use mpd built-in searching (no regexes, pattern matching)
2102 ## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
2103 ##       but if your mpd is on a remote machine, downloading big database
2104 ##       to process it can take a while
2105 ## - 3 - match only exact values (this mode uses mpd function for searching
2106 ##       in database and local one for searching in current playlist)
2107 ##
2108 #
2109 #search_engine_default_search_mode = 1
2110 #
2111 #external_editor = nano
2112 #
2113 ## Note: set to yes if external editor is a console application.
2114 ##
2115 #use_console_editor = yes
2116 #
2117 ##### colors definitions #####
2118 ##
2119 ## It is possible to set a background color by setting a color
2120 ## value "<foreground>_<background>", e.g. red_black will set
2121 ## foregound color to red and background color to black.
2122 ##
2123 ## In addition, for terminals that support 256 colors it
2124 ## is possible to set one of them by using a number in range
2125 ## [1, 256] instead of color name, e.g. numerical value
2126 ## corresponding to red_black is 2_1. To find out if the
2127 ## terminal supports 256 colors, run ncmpcpp and check out
2128 ## the bottom of the help screen for list of available colors
2129 ## and their numerical values.
2130 ##
2131 ## Note: due to technical limitations of ncurses, if 256 colors
2132 ## are used, it is possible to either use only the colors with
2133 ## default background color, or all pairs from 1_1 up to 254_127,
2134 ## depending on the ncurses version used.
2135 ##
2136 #
2137 #colors_enabled = yes
2138 #
2139 #empty_tag_color = cyan
2140 #
2141 #header_window_color = default
2142 #
2143 #volume_color = default
2144 #
2145 #state_line_color = default
2146 #
2147 #state_flags_color = default
2148 #
2149 #main_window_color = yellow
2150 #
2151 #color1 = white
2152 #
2153 #color2 = green
2154 #
2155 #main_window_highlight_color = yellow
2156 #
2157 #progressbar_color = black
2158 #
2159 #progressbar_elapsed_color = green
2160 #
2161 #statusbar_color = default
2162 #
2163 #alternative_ui_separator_color = black
2164 #
2165 #active_column_color = red
2166 #
2167 #window_border_color = green
2168 #
2169 #active_window_border = red
2170 #
2171 #+end_src
2172
2173 *** bindings
2174 :PROPERTIES:
2175 :header-args+: :tangle ~/.ncmpcpp/bindings
2176 :END:
2177
2178 #+begin_src conf :tangle no
2179 def_key "j"
2180     scroll_down
2181 def_key "k"
2182     scroll_up
2183
2184 def_key "ctrl-u"
2185     page_up
2186 def_key "ctrl-d"
2187     page_down
2188
2189 def_key "h"
2190     previous_column
2191 def_key "l"
2192     next_column
2193
2194 def_key "."
2195     show_lyrics
2196
2197 def_key "n"
2198     next_found_item
2199 def_key "N"
2200     previous_found_item
2201
2202 def_key "J"
2203     move_sort_order_down
2204 def_key "K"
2205     move_sort_order_up
2206 #+end_src
2207
2208 ** notmuch
2209
2210 *** notmuch-config
2211 :PROPERTIES:
2212 :header-args+: :tangle ~/.notmuch-config
2213 :END:
2214
2215 #+begin_src conf
2216 # .notmuch-config - Configuration file for the notmuch mail system
2217 #
2218 # For more information about notmuch, see https://notmuchmail.org
2219
2220 # Database configuration
2221 #
2222 # The only value supported here is 'path' which should be the top-level
2223 # directory where your mail currently exists and to where mail will be
2224 # delivered in the future. Files should be individual email messages.
2225 # Notmuch will store its database within a sub-directory of the path
2226 # configured here named ".notmuch".
2227 #
2228 [database]
2229 path=/home/amin/oldmail
2230
2231 # User configuration
2232 #
2233 # Here is where you can let notmuch know how you would like to be
2234 # addressed. Valid settings are
2235 #
2236 #       name            Your full name.
2237 #       primary_email   Your primary email address.
2238 #       other_email     A list (separated by ';') of other email addresses
2239 #                       at which you receive email.
2240 #
2241 # Notmuch will use the various email addresses configured here when
2242 # formatting replies. It will avoid including your own addresses in the
2243 # recipient list of replies, and will set the From address based on the
2244 # address to which the original email was addressed.
2245 #
2246 [user]
2247 name=Amin Bandali
2248 primary_email=amin@aminb.org
2249 other_email=bandali@gnu.org;abandali@uwaterloo.ca;
2250
2251 # Configuration for "notmuch new"
2252 #
2253 # The following options are supported here:
2254 #
2255 #       tags    A list (separated by ';') of the tags that will be
2256 #               added to all messages incorporated by "notmuch new".
2257 #
2258 #       ignore  A list (separated by ';') of file and directory names
2259 #               that will not be searched for messages by "notmuch new".
2260 #
2261 #               NOTE: *Every* file/directory that goes by one of those
2262 #               names will be ignored, independent of its depth/location
2263 #               in the mail store.
2264 #
2265 [new]
2266 tags=new;
2267 #tags=unread;inbox;
2268 ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
2269
2270 # Search configuration
2271 #
2272 # The following option is supported here:
2273 #
2274 #       exclude_tags
2275 #               A ;-separated list of tags that will be excluded from
2276 #               search results by default.  Using an excluded tag in a
2277 #               query will override that exclusion.
2278 #
2279 [search]
2280 exclude_tags=deleted;spam;
2281
2282 # Maildir compatibility configuration
2283 #
2284 # The following option is supported here:
2285 #
2286 #       synchronize_flags      Valid values are true and false.
2287 #
2288 #       If true, then the following maildir flags (in message filenames)
2289 #       will be synchronized with the corresponding notmuch tags:
2290 #
2291 #               Flag    Tag
2292 #               ----    -------
2293 #               D       draft
2294 #               F       flagged
2295 #               P       passed
2296 #               R       replied
2297 #               S       unread (added when 'S' flag is not present)
2298 #
2299 #       The "notmuch new" command will notice flag changes in filenames
2300 #       and update tags, while the "notmuch tag" and "notmuch restore"
2301 #       commands will notice tag changes and update flags in filenames
2302 #
2303 [maildir]
2304 synchronize_flags=true
2305
2306 # Cryptography related configuration
2307 #
2308 # The following option is supported here:
2309 #
2310 #       gpg_path
2311 #               binary name or full path to invoke gpg.
2312 #
2313 [crypto]
2314 gpg_path=gpg
2315 #+end_src
2316
2317 *** pre-new hook
2318 :PROPERTIES:
2319 :header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang "#!/bin/sh"
2320 :END:
2321
2322 #+begin_src sh
2323 touch /tmp/gnusieve.log
2324 sieve-filter -eW -o postmaster_address=postmaster@aminb.org \
2325              -o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log
2326 #+end_src
2327
2328 *** post-new hook
2329 :PROPERTIES:
2330 :header-args+: :tangle ~/mail/.notmuch/hooks/post-new :shebang "#!/bin/sh"
2331 :END:
2332
2333 #+begin_src sh
2334 # apply sent tag to messages sent by me
2335 notmuch tag -new +sent -- from:amin@aminb.org or from:bandali@gnu.org or from:aminb@gnu.org or from:amin@gnu.org or from:mab@gnu.org or from:abandali@uwaterloo.ca
2336
2337 # initial tagging
2338 notmuch tag -latest                     -- tag:latest
2339 notmuch tag +inbox +unread +latest -new -- tag:new
2340
2341
2342 # apply tags to lists
2343
2344 # <aminb>
2345 notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
2346 notmuch tag -inbox +lists/haskell-weekly   -- folder:amin/lists/haskell-weekly
2347
2348 notmuch tag -inbox +pay     -- folder:amin/pay
2349 notmuch tag -inbox +banking -- folder:amin/banking
2350 notmuch tag -inbox +work    -- folder:amin/work
2351 # </aminb>
2352
2353 # <uw>
2354 notmuch tag -inbox +uw/cs136  -- folder:uwaterloo/lists/cs136
2355 notmuch tag -inbox +uw/cs846  -- folder:uwaterloo/lists/cs846
2356 notmuch tag -inbox +uw/ece750 -- folder:uwaterloo/lists/ece750
2357 notmuch tag -inbox +uw/se212  -- folder:uwaterloo/lists/se212
2358 notmuch tag -inbox +uw/se463  -- folder:uwaterloo/lists/se463
2359
2360 notmuch tag -inbox +lists/alloytools       -- folder:uwaterloo/lists/alloytools
2361 notmuch tag -inbox +lists/clvsingle        -- folder:uwaterloo/lists/Clvsingle
2362 notmuch tag -inbox +lists/gsa              -- folder:uwaterloo/lists/GSA
2363 notmuch tag -inbox +lists/math-grad        -- folder:uwaterloo/lists/Math-grad
2364 notmuch tag -inbox +lists/scs-grads        -- folder:uwaterloo/lists/scs-grads
2365 notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
2366 # </uw>
2367
2368 # <gnu>
2369 notmuch tag -inbox +l/emacs-devel       -- folder:gnu/l/emacs-devel
2370 notmuch tag -inbox +l/emacs-orgmode     -- folder:gnu/l/emacs-orgmode
2371 notmuch tag -inbox +l/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
2372 notmuch tag -inbox +l/fencepost-users   -- folder:gnu/l/fencepost-users
2373 notmuch tag -inbox +l/guix-devel        -- folder:gnu/l/guix-devel
2374 notmuch tag -inbox +l/guile-devel       -- folder:gnu/l/guile-devel
2375 notmuch tag -inbox +l/help-gnu-emacs    -- folder:gnu/l/help-gnu-emacs
2376 notmuch tag -inbox +l/info-gnu-emacs    -- folder:gnu/l/info-gnu-emacs
2377 notmuch tag -inbox +l/www-commits       -- folder:gnu/l/www-commits
2378 notmuch tag -inbox +l/www-discuss       -- folder:gnu/l/www-discuss
2379 notmuch tag -inbox +webmasters          -- folder:gnu/webmasters
2380
2381 notmuch tag -inbox +l/deepspec     -- folder:gnu/l/deepspec
2382 notmuch tag -inbox +l/haskell-cafe -- folder:gnu/l/haskell-cafe
2383 notmuch tag -inbox +l/haskell-art  -- folder:gnu/l/haskell-art
2384 notmuch tag -inbox +l/notmuch      -- folder:gnu/l/notmuch
2385
2386 notmuch tag -inbox +l/~aminb/test-priv         -- folder:gnu/l/~aminb/test-priv
2387 notmuch tag -inbox +l/~sircmpwn/sr.ht-admins   -- folder:gnu/l/~sircmpwn/sr.ht-admins
2388 notmuch tag -inbox +l/~sircmpwn/sr.ht-announce -- folder:gnu/l/~sircmpwn/sr.ht-announce
2389 notmuch tag -inbox +l/~sircmpwn/sr.ht-dev      -- folder:gnu/l/~sircmpwn/sr.ht-dev
2390 notmuch tag -inbox +l/~sircmpwn/sr.ht-discuss  -- folder:gnu/l/~sircmpwn/sr.ht-discuss
2391 # </gnu>
2392
2393 notmuch tag -inbox -unread +archive/notmuch     -- path:archive/notmuch/**
2394 notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**
2395 #+end_src
2396
2397 *** notmuch.service
2398 :PROPERTIES:
2399 :header-args+: :tangle ~/.config/systemd/user/notmuch.service
2400 :END:
2401
2402 #+begin_src conf :tangle no
2403 [Unit]
2404 Description=notmuch service
2405
2406 [Service]
2407 Type=oneshot
2408 ExecStart=/usr/bin/notmuch new
2409 StandardOutput=syslog
2410 StandardError=syslog
2411 #+end_src
2412
2413 *** notmuch.timer
2414 :PROPERTIES:
2415 :header-args+: :tangle ~/.config/systemd/user/notmuch.timer
2416 :END:
2417
2418 #+begin_src conf :tangle no
2419 [Unit]
2420 Description=notmuch timer
2421
2422 [Timer]
2423 OnCalendar=*:0/5
2424 Persistent=true
2425 Unit=notmuch.service
2426
2427 [Install]
2428 WantedBy=timers.target
2429 #+end_src
2430
2431 ** offlineimap
2432
2433 *** offlineimaprc
2434 :PROPERTIES:
2435 :header-args+: :tangle ~/.offlineimaprc
2436 :END:
2437
2438 #+begin_src conf :tangle no
2439 [general]
2440 pythonfile = ~/.offlineimap.py
2441 accounts = Gmail, aminb
2442 maxsyncaccounts = 3
2443
2444 [Account Gmail]
2445 localrepository = GmailL
2446 remoterepository = GmailR
2447
2448 [Account aminb]
2449 localrepository = aminbL
2450 remoterepository = aminbR
2451
2452 [Repository GmailL]
2453 type = Maildir
2454 localfolders = ~/Maildir/Gmail
2455
2456 [Repository GmailR]
2457 type = IMAP
2458 remotehost = imap.gmail.com
2459 remoteusereval = mailuser("gmail")
2460 remotepasseval = mailpasswd("gmail")
2461 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2462 ssl = yes
2463 folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
2464 maxconnections = 1
2465 realdelete = no
2466
2467 [Repository aminbL]
2468 type = Maildir
2469 localfolders = ~/Maildir/aminb
2470
2471 [Repository aminbR]
2472 type = IMAP
2473 remotehost = mail.aminb.org
2474 remoteusereval = mailuser("aminb")
2475 remotepasseval = mailpasswd("aminb")
2476 sslcacertfile = /etc/ssl/certs/ca-certificates.crt
2477 ssl = yes
2478 folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
2479 maxconnections = 1
2480 realdelete = no
2481 #+end_src
2482
2483 *** offlineimap.py
2484 :PROPERTIES:
2485 :header-args+: :tangle ~/.offlineimap.py
2486 :END:
2487
2488 #+begin_src python :tangle no
2489 import os
2490 import subprocess
2491
2492 def mailpasswd(acct):
2493     acct = os.path.basename(acct)
2494     path = "/home/amin/.passwd/%s.gpg" % acct
2495     args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
2496     try:
2497         return subprocess.check_output(args).strip()
2498     except subprocess.CalledProcessError:
2499         return ""
2500
2501 def mailuser(acct):
2502     acct = os.path.basename(acct)
2503     path = "/home/amin/.passwd/%s" % acct
2504     args = ["cat", path]
2505     try:
2506         return subprocess.check_output(args).strip()
2507     except subprocess.CalledProcessError:
2508         return ""
2509
2510 def prime_gpg_agent():
2511   ret = False
2512   i = 1
2513   while not ret:
2514     ret = (mailpasswd("prime") == "prime")
2515     if i > 2:
2516       from offlineimap.ui import getglobalui
2517       sys.stderr.write("Error reading in passwords. Terminating.\n")
2518       getglobalui().terminate()
2519     i += 1
2520   return ret
2521
2522 prime_gpg_agent()
2523 #+end_src
2524
2525 ** pigeonhole
2526 *** gnu.sieve
2527 :PROPERTIES:
2528 :header-args+: :tangle ~/sieve/gnu.sieve :comments none
2529 :END:
2530
2531 #+begin_src conf
2532 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags", "include" ];
2533
2534 if anyof (
2535   address :is "from" "webmasters@gnu.org",
2536   address :is "from" "webmasters-comment@gnu.org") {
2537   fileinto :create "webmasters";
2538   stop;
2539 }
2540
2541 include :personal "lists";
2542 #+end_src
2543
2544 *** lists.sieve
2545 :PROPERTIES:
2546 :header-args+: :tangle ~/sieve/lists.sieve :comments none
2547 :END:
2548
2549 #+begin_src conf
2550 require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags",
2551  "include" ];
2552
2553 if anyof (
2554     header :contains "list-id" "<emacs-devel.gnu.org>",
2555     header :contains "list-id" "<emacs-orgmode.gnu.org>",
2556     header :contains "list-id" "<emacsconf-discuss.gnu.org>",
2557     header :contains "list-id" "<fencepost-users.gnu.org>",
2558     header :contains "list-id" "<guix-devel.gnu.org>",
2559     header :contains "list-id" "<guile-devel.gnu.org>",
2560     header :contains "list-id" "<help-gnu-emacs.gnu.org>",
2561     header :contains "list-id" "<info-gnu-emacs.gnu.org>",
2562     header :contains "list-id" "<www-commits.gnu.org>",
2563     header :contains "list-id" "<www-discuss.gnu.org>",
2564     header :contains "list-id" "<deepspec.lists.cs.princeton.edu>",
2565     header :contains "list-id" "<haskell-cafe.haskell.org>",
2566     header :contains "list-id" "<haskell-art.we.lurk.org>",
2567     header :contains "list-id" "<notmuch.notmuchmail.org>") {
2568     if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
2569         set :lower "listname" "${1}";
2570         fileinto :create "l/${listname}";
2571     }
2572 }
2573
2574 if anyof (
2575     header :contains "list-id" "<~aminb/test-priv@lists.sr.ht>",
2576     header :contains "list-id" "<~sircmpwn/sr.ht-admins@lists.sr.ht>",
2577     header :contains "list-id" "<~sircmpwn/sr.ht-announce@lists.sr.ht>",
2578     header :contains "list-id" "<~sircmpwn/sr.ht-dev@lists.sr.ht>",
2579     header :contains "list-id" "<~sircmpwn/sr.ht-discuss@lists.sr.ht>") {
2580     if header :regex "list-id" "(~[a-z_0-9-]+)/([a-z_0-9.-]+)@" {
2581         set :lower "username" "${1}";
2582         set :lower "listname" "${2}";
2583         fileinto :create "l/${username}/${listname}";
2584     }
2585 }
2586 #+end_src
2587
2588 ** polybar
2589
2590 *** config
2591 :PROPERTIES:
2592 :header-args+: :tangle ~/.config/polybar/config
2593 :END:
2594
2595 #+begin_src conf :tangle no
2596 ;=====================================================
2597 ;
2598 ;   To learn more about how to configure Polybar
2599 ;   go to https://github.com/jaagr/polybar
2600 ;
2601 ;   The README contains alot of information
2602 ;
2603 ;=====================================================
2604
2605 [colors]
2606 ;background = ${xrdb:color0:#222}
2607 background = #222
2608 background-alt = #444
2609 ;foreground = ${xrdb:color7:#222}
2610 foreground = #eee
2611 foreground-alt = #888
2612 primary = #ffb52a
2613 secondary = #e60053
2614 alert = #bd2c40
2615
2616 [bar/main]
2617 ;monitor = ${env:MONITOR:HDMI-1}
2618 width = 100%
2619 height = 27
2620 ;offset-x = 1%
2621 ;offset-y = 1%
2622 radius = 3.0
2623 fixed-center = true
2624
2625 background = ${colors.background}
2626 foreground = ${colors.foreground}
2627
2628 line-size = 3
2629 line-color = #f00
2630
2631 border-size = 4
2632 border-color = #00000000
2633
2634 padding-left = 0
2635 padding-right = 2
2636
2637 module-margin-left = 2
2638 module-margin-right = 2
2639
2640 font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
2641 font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
2642 font-2 = Wuncon Siji:pixelsize=10;1
2643 font-3 = FontAwesome:pixelsize=10;1
2644
2645 modules-left = bspwm xwindow
2646 modules-center =
2647 modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
2648
2649 tray-position = right
2650 tray-padding = 1
2651 ;tray-transparent = true
2652 ;tray-background = #0063ff
2653 tray-maxsize = 18
2654
2655 wm-restack = bspwm
2656
2657 ;override-redirect = true
2658
2659 scroll-up = bspwm-desknext
2660 scroll-down = bspwm-deskprev
2661
2662 [module/xwindow]
2663 type = internal/xwindow
2664 label = %title:0:50:...%
2665
2666 [module/xkeyboard]
2667 type = internal/xkeyboard
2668 blacklist-0 = num lock
2669
2670 format-prefix = " "
2671 format-prefix-foreground = ${colors.foreground-alt}
2672 format-prefix-underline = ${colors.secondary}
2673
2674 label-layout = %layout%
2675 label-layout-underline = ${colors.secondary}
2676
2677 label-indicator-padding = 2
2678 label-indicator-margin = 1
2679 label-indicator-background = ${colors.secondary}
2680 label-indicator-underline = ${colors.secondary}
2681
2682 [module/filesystem]
2683 type = internal/fs
2684 interval = 25
2685
2686 mount-0 = /
2687
2688 label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
2689 label-unmounted = %mountpoint% not mounted
2690 label-unmounted-foreground = ${colors.foreground-alt}
2691
2692 [module/bspwm]
2693 type = internal/bspwm
2694
2695 label-focused = %index%
2696 label-focused-background = ${colors.background-alt}
2697 label-focused-underline= ${colors.primary}
2698 label-focused-padding = 2
2699
2700 label-occupied = %index%
2701 label-occupied-padding = 2
2702
2703 label-urgent = %index%!
2704 label-urgent-background = ${colors.alert}
2705 label-urgent-padding = 2
2706
2707 label-empty = %index%
2708 label-empty-foreground = ${colors.foreground-alt}
2709 label-empty-padding = 2
2710
2711 [module/i3]
2712 type = internal/i3
2713 format = <label-state> <label-mode>
2714 index-sort = true
2715 wrapping-scroll = false
2716
2717 ; Only show workspaces on the same output as the bar
2718 ;pin-workspaces = true
2719
2720 label-mode-padding = 2
2721 label-mode-foreground = #000
2722 label-mode-background = ${colors.primary}
2723
2724 ; focused = Active workspace on focused monitor
2725 label-focused = %index%
2726 label-focused-background = ${module/bspwm.label-focused-background}
2727 label-focused-underline = ${module/bspwm.label-focused-underline}
2728 label-focused-padding = ${module/bspwm.label-focused-padding}
2729
2730 ; unfocused = Inactive workspace on any monitor
2731 label-unfocused = %index%
2732 label-unfocused-padding = ${module/bspwm.label-occupied-padding}
2733
2734 ; visible = Active workspace on unfocused monitor
2735 label-visible = %index%
2736 label-visible-background = ${self.label-focused-background}
2737 label-visible-underline = ${self.label-focused-underline}
2738 label-visible-padding = ${self.label-focused-padding}
2739
2740 ; urgent = Workspace with urgency hint set
2741 label-urgent = %index%
2742 label-urgent-background = ${module/bspwm.label-urgent-background}
2743 label-urgent-padding = ${module/bspwm.label-urgent-padding}
2744
2745 [module/mpd]
2746 type = internal/mpd
2747 format-online = <label-song>  <icon-prev> <icon-stop> <toggle> <icon-next>
2748
2749 icon-prev = 
2750 icon-stop = 
2751 icon-play = 
2752 icon-pause = 
2753 icon-next = 
2754
2755 label-song-maxlen = 25
2756 label-song-ellipsis = true
2757
2758 [module/xbacklight]
2759 type = internal/xbacklight
2760
2761 format = <label> <bar>
2762 label = BL
2763
2764 bar-width = 10
2765 bar-indicator = |
2766 bar-indicator-foreground = #ff
2767 bar-indicator-font = 2
2768 bar-fill = ─
2769 bar-fill-font = 2
2770 bar-fill-foreground = #9f78e1
2771 bar-empty = ─
2772 bar-empty-font = 2
2773 bar-empty-foreground = ${colors.foreground-alt}
2774
2775 [module/backlight-acpi]
2776 inherit = module/xbacklight
2777 type = internal/backlight
2778 ;card = intel_backlight
2779 card = mba6x_backlight
2780
2781 [module/cpu]
2782 type = internal/cpu
2783 interval = 2
2784 format-prefix = " "
2785 format-prefix-foreground = ${colors.foreground-alt}
2786 format-underline = #f90000
2787 label = %percentage%%
2788
2789 [module/memory]
2790 type = internal/memory
2791 interval = 2
2792 format-prefix = " "
2793 format-prefix-foreground = ${colors.foreground-alt}
2794 format-underline = #4bffdc
2795 label = %percentage_used%%
2796
2797 [module/wlan]
2798 type = internal/network
2799 interface =
2800 interval = 3.0
2801
2802 format-connected = <ramp-signal> <label-connected>
2803 format-connected-underline = #9f78e1
2804 label-connected = %essid%
2805
2806 format-disconnected =
2807 ;format-disconnected = <label-disconnected>
2808 ;format-disconnected-underline = ${self.format-connected-underline}
2809 ;label-disconnected = %ifname% disconnected
2810 ;label-disconnected-foreground = ${colors.foreground-alt}
2811
2812 ramp-signal-0 = 
2813 ramp-signal-1 = 
2814 ramp-signal-2 = 
2815 ramp-signal-3 = 
2816 ramp-signal-4 = 
2817 ramp-signal-foreground = ${colors.foreground-alt}
2818
2819 [module/eth]
2820 type = internal/network
2821 interface =
2822 interval = 3.0
2823
2824 format-connected-underline = #55aa55
2825 format-connected-prefix = " "
2826 format-connected-prefix-foreground = ${colors.foreground-alt}
2827 label-connected = %local_ip%
2828
2829 format-disconnected =
2830 ;format-disconnected = <label-disconnected>
2831 ;format-disconnected-underline = ${self.format-connected-underline}
2832 ;label-disconnected = %ifname% disconnected
2833 ;label-disconnected-foreground = ${colors.foreground-alt}
2834
2835 [module/date]
2836 type = internal/date
2837 interval = 5
2838
2839 date =
2840 date-alt = " %Y-%m-%d"
2841
2842 time = %H:%M
2843 time-alt = %H:%M:%S
2844
2845 format-prefix = 
2846 format-prefix-foreground = ${colors.foreground-alt}
2847 format-underline = #0a6cf5
2848
2849 label = %date% %time%
2850
2851 [module/volume]
2852 type = internal/volume
2853
2854 format-volume = <label-volume> <bar-volume>
2855 label-volume = vol
2856 label-volume-foreground = ${root.foreground}
2857
2858 format-muted-prefix = " "
2859 format-muted-foreground = ${colors.foreground-alt}
2860 label-muted = mute
2861
2862 bar-volume-width = 10
2863 bar-volume-foreground-0 = #55aa55
2864 bar-volume-foreground-1 = #55aa55
2865 bar-volume-foreground-2 = #55aa55
2866 bar-volume-foreground-3 = #55aa55
2867 bar-volume-foreground-4 = #55aa55
2868 bar-volume-foreground-5 = #f5a70a
2869 bar-volume-foreground-6 = #ff5555
2870 bar-volume-gradient = false
2871 bar-volume-indicator = |
2872 bar-volume-indicator-font = 2
2873 bar-volume-fill = ─
2874 bar-volume-fill-font = 2
2875 bar-volume-empty = ─
2876 bar-volume-empty-font = 2
2877 bar-volume-empty-foreground = ${colors.foreground-alt}
2878
2879 [module/battery]
2880 type = internal/battery
2881 battery = BAT0
2882 adapter = ADP1
2883 full-at = 64
2884
2885 format-charging = <animation-charging> <label-charging>
2886 format-charging-underline = #ffb52a
2887
2888 format-discharging = <ramp-capacity> <label-discharging>
2889 format-discharging-underline = ${self.format-charging-underline}
2890
2891 format-full-prefix = " "
2892 format-full-prefix-foreground = ${colors.foreground-alt}
2893 format-full-underline = ${self.format-charging-underline}
2894
2895 ramp-capacity-0 = 
2896 ramp-capacity-1 = 
2897 ramp-capacity-2 = 
2898 ramp-capacity-foreground = ${colors.foreground-alt}
2899
2900 animation-charging-0 = 
2901 animation-charging-1 = 
2902 animation-charging-2 = 
2903 animation-charging-foreground = ${colors.foreground-alt}
2904 animation-charging-framerate = 750
2905
2906 [module/temperature]
2907 type = internal/temperature
2908 thermal-zone = 1
2909 warn-temperature = 66
2910
2911 format = <ramp> <label>
2912 format-underline = #f50a4d
2913 format-warn = <ramp> <label-warn>
2914 format-warn-underline = ${self.format-underline}
2915
2916 label = %temperature%
2917 label-warn = %temperature%
2918 label-warn-foreground = ${colors.secondary}
2919
2920 ramp-0 = 
2921 ramp-1 = 
2922 ramp-2 = 
2923 ramp-foreground = ${colors.foreground-alt}
2924
2925 [module/powermenu]
2926 type = custom/menu
2927
2928 format-spacing = 1
2929
2930 label-open = 
2931 label-open-foreground = ${colors.secondary}
2932 label-close =  cancel
2933 label-close-foreground = ${colors.secondary}
2934 label-separator = |
2935 label-separator-foreground = ${colors.foreground-alt}
2936
2937 menu-0-0 = reboot
2938 menu-0-0-exec = menu-open-1
2939 menu-0-1 = power off
2940 menu-0-1-exec = menu-open-2
2941
2942 menu-1-0 = cancel
2943 menu-1-0-exec = menu-open-0
2944 menu-1-1 = reboot
2945 menu-1-1-exec = sudo reboot
2946
2947 menu-2-0 = power off
2948 menu-2-0-exec = sudo poweroff
2949 menu-2-1 = cancel
2950 menu-2-1-exec = menu-open-0
2951
2952 [module/mail]
2953 type = custom/script
2954 interval = 60
2955 format = <label>
2956 format-prefix = " "
2957 format-prefix-foreground = ${colors.foreground-alt}
2958 format-underline = #0a6cf5
2959 exec = notmuch count tag:unread
2960
2961 [settings]
2962 screenchange-reload = true
2963 ;compositing-background = xor
2964 ;compositing-background = screen
2965 ;compositing-foreground = source
2966 ;compositing-border = over
2967
2968 [global/wm]
2969 margin-top = 0
2970 margin-bottom = 0
2971
2972 ; vim:ft=dosini
2973 #+end_src
2974
2975 *** polybar-launch
2976 :PROPERTIES:
2977 :header-args+: :tangle ~/.local/bin/polybar-launch :shebang "#!/usr/bin/env sh"
2978 :END:
2979
2980 #+begin_src sh :tangle no
2981 # Terminate already running bar instances
2982 killall -q polybar
2983
2984 # Wait until the processes have been shut down
2985 while pgrep -x polybar >/dev/null; do sleep 1; done
2986
2987 # Launch main bar
2988 polybar main &
2989
2990 echo "Bars launched..."
2991 #+end_src
2992
2993 ** PowerTOP
2994 :PROPERTIES:
2995 :header-args+: :tangle "/sudo::/etc/systemd/system/powertop.service"
2996 :END:
2997
2998 #+begin_src conf
2999 [Unit]
3000 Description=Powertop tunings
3001
3002 [Service]
3003 ExecStart=/usr/bin/powertop --auto-tune
3004 RemainAfterExit=true
3005
3006 [Install]
3007 WantedBy=multi-user.target
3008 #+end_src
3009
3010 ** ranger
3011
3012 *** rc.conf
3013 :PROPERTIES:
3014 :header-args+: :tangle ~/.config/ranger/rc.conf
3015 :END:
3016
3017 #+begin_src conf :tangle no
3018 # ===================================================================
3019 # This file contains the default startup commands for ranger.
3020 # To change them, it is recommended to create the file
3021 # ~/.config/ranger/rc.conf and add your custom commands there.
3022 #
3023 # If you copy this whole file there, you may want to set the environment
3024 # variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
3025 #
3026 # The purpose of this file is mainly to define keybindings and settings.
3027 # For running more complex python code, please create a plugin in "plugins/" or
3028 # a command in "commands.py".
3029 #
3030 # Each line is a command that will be run before the user interface
3031 # is initialized.  As a result, you can not use commands which rely
3032 # on the UI such as :delete or :mark.
3033 # ===================================================================
3034
3035 # ===================================================================
3036 # == Options
3037 # ===================================================================
3038
3039 # How many columns are there, and what are their relative widths?
3040 set column_ratios 1,3,4
3041
3042 # Which files should be hidden? (regular expression)
3043 set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
3044
3045 # Show hidden files? You can toggle this by typing 'zh'
3046 set show_hidden false
3047
3048 # Ask for a confirmation when running the "delete" command?
3049 # Valid values are "always" (default), "never", "multiple"
3050 # With "multiple", ranger will ask only if you delete multiple files at once.
3051 set confirm_on_delete multiple
3052
3053 # Which script is used to generate file previews?
3054 # ranger ships with scope.sh, a script that calls external programs (see
3055 # README for dependencies) to preview images, archives, etc.
3056 set preview_script ~/.config/ranger/scope.sh
3057
3058 # Use the external preview script or display simple plain text previews?
3059 set use_preview_script true
3060
3061 # Open all images in this directory when running certain image viewers
3062 # like feh or sxiv?  You can still open selected files by marking them.
3063 set open_all_images true
3064
3065 # Be aware of version control systems and display information.
3066 set vcs_aware false
3067
3068 # State of the three backends git, hg, bzr. The possible states are
3069 # disabled, local (only show local info), enabled (show local and remote
3070 # information).
3071 set vcs_backend_git enabled
3072 set vcs_backend_hg disabled
3073 set vcs_backend_bzr disabled
3074
3075 # Preview images in full color with the external command "w3mimgpreview"?
3076 # This requires the console web browser "w3m" and a supported terminal.
3077 # It has been successfully tested with "xterm" and "urxvt" without tmux.
3078 set preview_images true
3079
3080 # Use a unicode "..." character to mark cut-off filenames?
3081 set unicode_ellipsis false
3082
3083 # Show dotfiles in the bookmark preview box?
3084 set show_hidden_bookmarks true
3085
3086 # Which colorscheme to use?  These colorschemes are available by default:
3087 # default, jungle, snow
3088 set colorscheme default
3089
3090 # Preview files on the rightmost column?
3091 # And collapse (shrink) the last column if there is nothing to preview?
3092 set preview_files true
3093 set preview_directories true
3094 set collapse_preview true
3095
3096 # Save the console history on exit?
3097 set save_console_history true
3098
3099 # Draw the status bar on top of the browser window (default: bottom)
3100 set status_bar_on_top false
3101
3102 # Draw a progress bar in the status bar which displays the average state of all
3103 # currently running tasks which support progress bars?
3104 set draw_progress_bar_in_status_bar true
3105
3106 # Draw borders around columns?
3107 set draw_borders true
3108
3109 # Display the directory name in tabs?
3110 set dirname_in_tabs false
3111
3112 # Enable the mouse support?
3113 set mouse_enabled true
3114
3115 # Display the file size in the main column or status bar?
3116 set display_size_in_main_column true
3117 set display_size_in_status_bar true
3118
3119 # Display files tags in all columns or only in main column?
3120 set display_tags_in_all_columns true
3121
3122 # Set a title for the window?
3123 set update_title false
3124
3125 # Set the title to "ranger" in the tmux program?
3126 set update_tmux_title false
3127
3128 # Shorten the title if it gets long?  The number defines how many
3129 # directories are displayed at once, 0 turns off this feature.
3130 set shorten_title 3
3131
3132 # Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
3133 set tilde_in_titlebar false
3134
3135 # How many directory-changes or console-commands should be kept in history?
3136 set max_history_size 20
3137 set max_console_history_size 50
3138
3139 # Try to keep so much space between the top/bottom border when scrolling:
3140 set scroll_offset 8
3141
3142 # Flush the input after each key hit?  (Noticable when ranger lags)
3143 set flushinput true
3144
3145 # Padding on the right when there's no preview?
3146 # This allows you to click into the space to run the file.
3147 set padding_right true
3148
3149 # Save bookmarks (used with mX and `X) instantly?
3150 # This helps to synchronize bookmarks between multiple ranger
3151 # instances but leads to *slight* performance loss.
3152 # When false, bookmarks are saved when ranger is exited.
3153 set autosave_bookmarks true
3154
3155 # You can display the "real" cumulative size of directories by using the
3156 # command :get_cumulative_size or typing "dc".  The size is expensive to
3157 # calculate and will not be updated automatically.  You can choose
3158 # to update it automatically though by turning on this option:
3159 set autoupdate_cumulative_size false
3160
3161 # Turning this on makes sense for screen readers:
3162 set show_cursor false
3163
3164 # One of: size, basename, mtime, type
3165 set sort natural
3166
3167 # Additional sorting options
3168 set sort_reverse false
3169 set sort_case_insensitive true
3170 set sort_directories_first true
3171
3172 # Enable this if key combinations with the Alt Key don't work for you.
3173 # (Especially on xterm)
3174 set xterm_alt_key false
3175
3176 # ===================================================================
3177 # == Local Options
3178 # ===================================================================
3179 # You can set local options that only affect a single directory.
3180
3181 # Examples:
3182 # setlocal path=~/downloads sort mtime
3183
3184 # ===================================================================
3185 # == Command Aliases in the Console
3186 # ===================================================================
3187
3188 alias e    edit
3189 alias q    quit
3190 alias q!   quitall
3191 alias qall quitall
3192 alias setl setlocal
3193
3194 alias filter     scout -prt
3195 alias find       scout -aet
3196 alias mark       scout -mr
3197 alias unmark     scout -Mr
3198 alias search     scout -rs
3199 alias search_inc scout -rts
3200 alias travel     scout -aefiklst
3201
3202 # ===================================================================
3203 # == Define keys for the browser
3204 # ===================================================================
3205
3206 # Basic
3207 map     Q quit!
3208 map     q quit
3209 copymap q ZZ ZQ
3210
3211 map R     reload_cwd
3212 map <C-r> reset
3213 map <C-l> redraw_window
3214 map <C-c> abort
3215 map <esc> change_mode normal
3216
3217 map i display_file
3218 map ? help
3219 map W display_log
3220 map w taskview_open
3221 map S shell $SHELL
3222
3223 map :  console
3224 map ;  console
3225 map !  console shell
3226 map @  console -p6 shell  %%s
3227 map #  console shell -p
3228 map s  console shell
3229 map r  chain draw_possible_programs; console open_with
3230 map f  console find
3231 map cd console cd
3232
3233 # Tagging / Marking
3234 map t       tag_toggle
3235 map ut      tag_remove
3236 map "<any>  tag_toggle tag=%any
3237 map <Space> mark_files toggle=True
3238 map v       mark_files all=True toggle=True
3239 map uv      mark_files all=True val=False
3240 map V       toggle_visual_mode
3241 map uV      toggle_visual_mode reverse=True
3242
3243 # For the nostalgics: Midnight Commander bindings
3244 map <F1> help
3245 map <F3> display_file
3246 map <F4> edit
3247 map <F5> copy
3248 map <F6> cut
3249 map <F7> console mkdir
3250 map <F8> console delete
3251 map <F10> exit
3252
3253 # In case you work on a keyboard with dvorak layout
3254 map <UP>       move up=1
3255 map <DOWN>     move down=1
3256 map <LEFT>     move left=1
3257 map <RIGHT>    move right=1
3258 map <HOME>     move to=0
3259 map <END>      move to=-1
3260 map <PAGEDOWN> move down=1   pages=True
3261 map <PAGEUP>   move up=1     pages=True
3262 map <CR>       move right=1
3263 map <DELETE>   console delete
3264 map <INSERT>   console touch
3265
3266 # VIM-like
3267 copymap <UP>       k
3268 copymap <DOWN>     j
3269 copymap <LEFT>     h
3270 copymap <RIGHT>    l
3271 copymap <HOME>     gg
3272 copymap <END>      G
3273 copymap <PAGEDOWN> <C-F>
3274 copymap <PAGEUP>   <C-B>
3275
3276 map J  move down=0.5  pages=True
3277 map K  move up=0.5    pages=True
3278 copymap J <C-D>
3279 copymap K <C-U>
3280
3281 # Jumping around
3282 map H     history_go -1
3283 map L     history_go 1
3284 map ]     move_parent 1
3285 map [     move_parent -1
3286 map }     traverse
3287
3288 map gh cd ~
3289 map ge cd /etc
3290 map gu cd /usr
3291 map gd cd /dev
3292 map gl cd -r .
3293 map gL cd -r %f
3294 map go cd /opt
3295 map gv cd /var
3296 map gm cd /media
3297 map gM cd /mnt
3298 map gs cd /srv
3299 map gr cd /
3300 map gR eval fm.cd(ranger.RANGERDIR)
3301 map g/ cd /
3302 map g? cd /usr/share/doc/ranger
3303
3304 # External Programs
3305 map E  edit
3306 map du shell -p du --max-depth=1 -h --apparent-size
3307 map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
3308 map yp shell -d echo -n %d/%f | xsel -i
3309 map yd shell -d echo -n %d    | xsel -i
3310 map yn shell -d echo -n %f    | xsel -i
3311
3312 # Filesystem Operations
3313 map =  chmod
3314
3315 map cw console rename
3316 map A  eval fm.open_console('rename ' + fm.thisfile.basename)
3317 map I  eval fm.open_console('rename ' + fm.thisfile.basename, position=7)
3318
3319 map pp paste
3320 map po paste overwrite=True
3321 map pl paste_symlink relative=False
3322 map pL paste_symlink relative=True
3323 map phl paste_hardlink
3324 map pht paste_hardlinked_subtree
3325
3326 map dd cut
3327 map ud uncut
3328 map da cut mode=add
3329 map dr cut mode=remove
3330
3331 map yy copy
3332 map uy uncut
3333 map ya copy mode=add
3334 map yr copy mode=remove
3335
3336 # Temporary workarounds
3337 map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
3338 map dG  eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
3339 map dj  eval fm.cut(dirarg=dict(down=1), narg=quantifier)
3340 map dk  eval fm.cut(dirarg=dict(up=1), narg=quantifier)
3341 map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
3342 map yG  eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
3343 map yj  eval fm.copy(dirarg=dict(down=1), narg=quantifier)
3344 map yk  eval fm.copy(dirarg=dict(up=1), narg=quantifier)
3345
3346 # Searching
3347 map /  console search
3348 map n  search_next
3349 map N  search_next forward=False
3350 map ct search_next order=tag
3351 map cs search_next order=size
3352 map ci search_next order=mimetype
3353 map cc search_next order=ctime
3354 map cm search_next order=mtime
3355 map ca search_next order=atime
3356
3357 # Tabs
3358 map <C-n>     tab_new ~
3359 map <C-w>     tab_close
3360 map <TAB>     tab_move 1
3361 map <S-TAB>   tab_move -1
3362 map <A-Right> tab_move 1
3363 map <A-Left>  tab_move -1
3364 map gt        tab_move 1
3365 map gT        tab_move -1
3366 map gn        tab_new ~
3367 map gc        tab_close
3368 map uq        tab_restore
3369 map <a-1>     tab_open 1
3370 map <a-2>     tab_open 2
3371 map <a-3>     tab_open 3
3372 map <a-4>     tab_open 4
3373 map <a-5>     tab_open 5
3374 map <a-6>     tab_open 6
3375 map <a-7>     tab_open 7
3376 map <a-8>     tab_open 8
3377 map <a-9>     tab_open 9
3378
3379 # Sorting
3380 map or toggle_option sort_reverse
3381 map os chain set sort=size;      set sort_reverse=False
3382 map ob chain set sort=basename;  set sort_reverse=False
3383 map on chain set sort=natural;   set sort_reverse=False
3384 map om chain set sort=mtime;     set sort_reverse=False
3385 map oc chain set sort=ctime;     set sort_reverse=False
3386 map oa chain set sort=atime;     set sort_reverse=False
3387 map ot chain set sort=type;      set sort_reverse=False
3388
3389 map oS chain set sort=size;      set sort_reverse=True
3390 map oB chain set sort=basename;  set sort_reverse=True
3391 map oN chain set sort=natural;   set sort_reverse=True
3392 map oM chain set sort=mtime;     set sort_reverse=True
3393 map oC chain set sort=ctime;     set sort_reverse=True
3394 map oA chain set sort=atime;     set sort_reverse=True
3395 map oT chain set sort=type;      set sort_reverse=True
3396
3397 map dc get_cumulative_size
3398
3399 # Settings
3400 map zc    toggle_option collapse_preview
3401 map zd    toggle_option sort_directories_first
3402 map zh    toggle_option show_hidden
3403 map <C-h> toggle_option show_hidden
3404 map zi    toggle_option flushinput
3405 map zm    toggle_option mouse_enabled
3406 map zp    toggle_option preview_files
3407 map zP    toggle_option preview_directories
3408 map zs    toggle_option sort_case_insensitive
3409 map zu    toggle_option autoupdate_cumulative_size
3410 map zv    toggle_option use_preview_script
3411 map zf    console filter
3412
3413 # Bookmarks
3414 map `<any>  enter_bookmark %any
3415 map '<any>  enter_bookmark %any
3416 map m<any>  set_bookmark %any
3417 map um<any> unset_bookmark %any
3418
3419 map m<bg>   draw_bookmarks
3420 copymap m<bg>  um<bg> `<bg> '<bg>
3421
3422 # Generate all the chmod bindings with some python help:
3423 eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
3424 eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
3425 eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
3426 eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
3427 eval for arg in "rwxXst": cmd("map +{0}  shell -d chmod u+{0} %s".format(arg))
3428
3429 eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
3430 eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
3431 eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
3432 eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
3433 eval for arg in "rwxXst": cmd("map -{0}  shell -d chmod u-{0} %s".format(arg))
3434
3435 # ===================================================================
3436 # == Define keys for the console
3437 # ===================================================================
3438 # Note: Unmapped keys are passed directly to the console.
3439
3440 # Basic
3441 cmap <tab>   eval fm.ui.console.tab()
3442 cmap <s-tab> eval fm.ui.console.tab(-1)
3443 cmap <ESC>   eval fm.ui.console.close()
3444 cmap <CR>    eval fm.ui.console.execute()
3445 cmap <C-l>   redraw_window
3446
3447 copycmap <ESC> <C-c>
3448 copycmap <CR>  <C-j>
3449
3450 # Move around
3451 cmap <up>    eval fm.ui.console.history_move(-1)
3452 cmap <down>  eval fm.ui.console.history_move(1)
3453 cmap <left>  eval fm.ui.console.move(left=1)
3454 cmap <right> eval fm.ui.console.move(right=1)
3455 cmap <home>  eval fm.ui.console.move(right=0, absolute=True)
3456 cmap <end>   eval fm.ui.console.move(right=-1, absolute=True)
3457
3458 # Line Editing
3459 cmap <backspace>  eval fm.ui.console.delete(-1)
3460 cmap <delete>     eval fm.ui.console.delete(0)
3461 cmap <C-w>        eval fm.ui.console.delete_word()
3462 cmap <C-k>        eval fm.ui.console.delete_rest(1)
3463 cmap <C-u>        eval fm.ui.console.delete_rest(-1)
3464 cmap <C-y>        eval fm.ui.console.paste()
3465
3466 # And of course the emacs way
3467 copycmap <up>        <C-p>
3468 copycmap <down>      <C-n>
3469 copycmap <left>      <C-b>
3470 copycmap <right>     <C-f>
3471 copycmap <home>      <C-a>
3472 copycmap <end>       <C-e>
3473 copycmap <delete>    <C-d>
3474 copycmap <backspace> <C-h>
3475
3476 # Note: There are multiple ways to express backspaces.  <backspace> (code 263)
3477 # and <backspace2> (code 127).  To be sure, use both.
3478 copycmap <backspace> <backspace2>
3479
3480 # This special expression allows typing in numerals:
3481 cmap <allow_quantifiers> false
3482
3483 # ===================================================================
3484 # == Pager Keybindings
3485 # ===================================================================
3486
3487 # Movement
3488 pmap  <down>      pager_move  down=1
3489 pmap  <up>        pager_move  up=1
3490 pmap  <left>      pager_move  left=4
3491 pmap  <right>     pager_move  right=4
3492 pmap  <home>      pager_move  to=0
3493 pmap  <end>       pager_move  to=-1
3494 pmap  <pagedown>  pager_move  down=1.0  pages=True
3495 pmap  <pageup>    pager_move  up=1.0    pages=True
3496 pmap  <C-d>       pager_move  down=0.5  pages=True
3497 pmap  <C-u>       pager_move  up=0.5    pages=True
3498
3499 copypmap <UP>       k  <C-p>
3500 copypmap <DOWN>     j  <C-n> <CR>
3501 copypmap <LEFT>     h
3502 copypmap <RIGHT>    l
3503 copypmap <HOME>     g
3504 copypmap <END>      G
3505 copypmap <C-d>      d
3506 copypmap <C-u>      u
3507 copypmap <PAGEDOWN> n  f  <C-F>  <Space>
3508 copypmap <PAGEUP>   p  b  <C-B>
3509
3510 # Basic
3511 pmap     <ESC> pager_close
3512 copypmap <ESC> q Q i <F3>
3513 pmap E      edit_file
3514
3515 # ===================================================================
3516 # == Taskview Keybindings
3517 # ===================================================================
3518
3519 # Movement
3520 tmap <up>        taskview_move up=1
3521 tmap <down>      taskview_move down=1
3522 tmap <home>      taskview_move to=0
3523 tmap <end>       taskview_move to=-1
3524 tmap <pagedown>  taskview_move down=1.0  pages=True
3525 tmap <pageup>    taskview_move up=1.0    pages=True
3526 tmap <C-d>       taskview_move down=0.5  pages=True
3527 tmap <C-u>       taskview_move up=0.5    pages=True
3528
3529 copytmap <UP>       k  <C-p>
3530 copytmap <DOWN>     j  <C-n> <CR>
3531 copytmap <HOME>     g
3532 copytmap <END>      G
3533 copytmap <C-u>      u
3534 copytmap <PAGEDOWN> n  f  <C-F>  <Space>
3535 copytmap <PAGEUP>   p  b  <C-B>
3536
3537 # Changing priority and deleting tasks
3538 tmap J          eval -q fm.ui.taskview.task_move(-1)
3539 tmap K          eval -q fm.ui.taskview.task_move(0)
3540 tmap dd         eval -q fm.ui.taskview.task_remove()
3541 tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
3542 tmap <pageup>   eval -q fm.ui.taskview.task_move(0)
3543 tmap <delete>   eval -q fm.ui.taskview.task_remove()
3544
3545 # Basic
3546 tmap <ESC> taskview_close
3547 copytmap <ESC> q Q w <C-c>
3548 #+end_src
3549
3550 *** scope.sh
3551 :PROPERTIES:
3552 :header-args+: :tangle ~/.config/ranger/scope.sh :shebang "#!/usr/bin/env sh"
3553 :END:
3554
3555 #+begin_src sh :tangle no
3556 # ranger supports enhanced previews.  If the option "use_preview_script"
3557 # is set to True and this file exists, this script will be called and its
3558 # output is displayed in ranger.  ANSI color codes are supported.
3559
3560 # NOTES: This script is considered a configuration file.  If you upgrade
3561 # ranger, it will be left untouched. (You must update it yourself.)
3562 # Also, ranger disables STDIN here, so interactive scripts won't work properly
3563
3564 # Meanings of exit codes:
3565 # code | meaning    | action of ranger
3566 # -----+------------+-------------------------------------------
3567 # 0    | success    | success. display stdout as preview
3568 # 1    | no preview | failure. display no preview at all
3569 # 2    | plain text | display the plain content of the file
3570 # 3    | fix width  | success. Don't reload when width changes
3571 # 4    | fix height | success. Don't reload when height changes
3572 # 5    | fix both   | success. Don't ever reload
3573
3574 # Meaningful aliases for arguments:
3575 path="$1"    # Full path of the selected file
3576 width="$2"   # Width of the preview pane (number of fitting characters)
3577 height="$3"  # Height of the preview pane (number of fitting characters)
3578
3579 maxln=200    # Stop after $maxln lines.  Can be used like ls | head -n $maxln
3580
3581 # Find out something about the file:
3582 mimetype=$(file --mime-type -Lb "$path")
3583 extension=${path##*.}
3584
3585 # Functions:
3586 # runs a command and saves its output into $output.  Useful if you need
3587 # the return value AND want to use the output in a pipe
3588 try() { output=$(eval '"$@"'); }
3589
3590 # writes the output of the previouosly used "try" command
3591 dump() { echo "$output"; }
3592
3593 # a common post-processing function used after most commands
3594 trim() { head -n "$maxln"; }
3595
3596 # wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
3597 highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }
3598
3599 case "$extension" in
3600     # Archive extensions:
3601     7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
3602     rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
3603         try als "$path" && { dump | trim; exit 0; }
3604         try acat "$path" && { dump | trim; exit 3; }
3605         try bsdtar -lf "$path" && { dump | trim; exit 0; }
3606         exit 1;;
3607     rar)
3608         try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
3609     # PDF documents:
3610     pdf)
3611         try pdftotext -l 10 -nopgbrk -q "$path" - && \
3612             { dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
3613     # BitTorrent Files
3614     torrent)
3615         try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
3616     # HTML Pages:
3617     htm|html|xhtml)
3618         try w3m    -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3619         try lynx   -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3620         try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
3621         ;; # fall back to highlight/cat if the text browsers fail
3622 esac
3623
3624 case "$mimetype" in
3625     # Syntax highlight for text files:
3626     text/* | */xml)
3627         try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
3628     # Ascii-previews of images:
3629     image/*)
3630         img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
3631     # Display information about media files:
3632     video/* | audio/*)
3633         exiftool "$path" && exit 5
3634         # Use sed to remove spaces so the output fits into the narrow window
3635         try mediainfo "$path" && { dump | trim | sed 's/  \+:/: /;';  exit 5; } || exit 1;;
3636 esac
3637
3638 exit 1
3639 #+end_src
3640
3641 ** redshift
3642 :PROPERTIES:
3643 :header-args+: :tangle ~/.config/redshift.conf :comments none
3644 :END:
3645
3646 #+begin_src conf
3647 ; Global settings for redshift
3648 [redshift]
3649 ; Set the day and night screen temperatures (Neutral is 6500K)
3650 ;temp-day=5700
3651 ;temp-night=3500
3652
3653 ;temp-day=6500
3654 temp-day=6200
3655 ;temp-night=4800
3656 ;temp-night=5000
3657 ;temp-night=4500
3658 temp-night=4000
3659
3660 ; Enable/Disable a smooth transition between day and night
3661 ; 0 will cause a direct change from day to night screen temperature.
3662 ; 1 will gradually increase or decrease the screen temperature.
3663 transition=1
3664
3665 ; Set the screen brightness. Default is 1.0.
3666 ;brightness=0.9
3667 ; It is also possible to use different settings for day and night
3668 ; since version 1.8.
3669 ;brightness-day=0.7
3670 ;brightness-night=0.4
3671 ; Set the screen gamma (for all colors, or each color channel
3672 ; individually)
3673 ;gamma=0.8
3674 ;gamma=1.0
3675 ;gamma=0.8:0.7:0.8
3676 ; This can also be set individually for day and night since
3677 ; version 1.10.
3678 ;gamma-day=0.8:0.7:0.8
3679 ;gamma-night=0.6
3680
3681 ; Set the location-provider: 'geoclue2' or 'manual'
3682 ; type 'redshift -l list' to see possible values.
3683 ; The location provider settings are in a different section.
3684 ;location-provider=manual
3685 location-provider=geoclue2
3686
3687 ; Set the adjustment-method: 'randr', 'vidmode'
3688 ; type 'redshift -m list' to see all possible values.
3689 ; 'randr' is the preferred method, 'vidmode' is an older API.
3690 ; but works in some cases when 'randr' does not.
3691 ; The adjustment method settings are in a different section.
3692 adjustment-method=randr
3693
3694 ; Configuration of the location-provider:
3695 ; type 'redshift -l PROVIDER:help' to see the settings.
3696 ; ex: 'redshift -l manual:help'
3697 ; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
3698 ; are negative numbers.
3699 ;[manual]
3700 ;lat=48.1
3701 ;lon=11.6
3702
3703 ; Configuration of the adjustment-method
3704 ; type 'redshift -m METHOD:help' to see the settings.
3705 ; ex: 'redshift -m randr:help'
3706 ; In this example, randr is configured to adjust screen 1.
3707 ; Note that the numbering starts from 0, so this is actually the
3708 ; second screen. If this option is not specified, Redshift will try
3709 ; to adjust _all_ screens.
3710 ;[randr]
3711 ;screen=1
3712 #+end_src
3713
3714 ** rofi
3715 :PROPERTIES:
3716 :header-args+: :tangle ~/.config/rofi/config
3717 :END:
3718
3719 #+begin_src conf
3720 ! rofi.font: Ubuntu Mono 13
3721 ! rofi.font: Inconsolata 16
3722 ! rofi.font: Iosevka 13
3723 ! rofi.font: Source Code Pro 11
3724 rofi.font: Source Code Pro 10.5
3725 rofi.modi: run,window
3726 ! rofi.width: 640
3727 rofi.width: 600
3728 !rofi.location: 2
3729 !rofi.yoffset: 200
3730 rofi.monitor: -1
3731 !rofi.lines: 10
3732
3733 !rofi.theme: /usr/share/rofi/themes//Arc.rasi
3734 !rofi.theme: /usr/share/rofi/themes//Paper.rasi
3735 !rofi.theme: /usr/share/rofi/themes//sidebar.rasi
3736
3737 rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
3738 #+end_src
3739
3740 ** rofi-pass
3741 :PROPERTIES:
3742 :header-args+: :tangle ~/.config/rofi-pass/config
3743 :END:
3744
3745 #+begin_src conf
3746 # permanently set alternative root dir
3747 # root=/path/to/root
3748
3749 # rofi command. Make sure to have "$@" as last argument
3750 _rofi () {
3751     #rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
3752     rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
3753 }
3754
3755 # xdotool needs the keyboard layout to be set using setxkbmap
3756 # You can do this in your autostart scripts (e.g. xinitrc)
3757
3758 # If for some reason, you cannot do this, you can set the command here.
3759 # and set fix_layout to true
3760 fix_layout=false
3761
3762 layout_cmd () {
3763   setxkbmap us
3764 }
3765
3766 # fields to be used
3767 URL_field='url'
3768 USERNAME_field='user'
3769 AUTOTYPE_field='autotype'
3770
3771 # delay to be used for :delay keyword
3772 delay=2
3773
3774 ## Programs to be used
3775 # Editor
3776 EDITOR='gvim -f'
3777
3778 # Browser
3779 BROWSER='chromium'
3780
3781 ## Misc settings
3782
3783 default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
3784 auto_enter='false'
3785 notify='false'
3786 default_autotype='user :tab pass'
3787
3788 # color of the help messages
3789 # leave empty for autodetection
3790 help_color="#4872FF"
3791
3792 # Clipboard settings
3793 # Possible options: primary, clipboard, both
3794 clip=primary
3795
3796 # Options for generating new password entries
3797 # default_user is also used for password files that have no user field.
3798 default_user=aminb
3799 default_user2=aminban
3800 password_length=30
3801
3802 # Custom Keybindings
3803 #autotype="Alt+1"
3804 autotype="Alt+m"
3805 type_user="Alt+2"
3806 type_pass="Alt+3"
3807 open_url="Alt+4"
3808 copy_name="Alt+u"
3809 copy_url="Alt+l"
3810 copy_pass="Alt+p"
3811 show="Alt+o"
3812 copy_entry="Alt+2"
3813 type_entry="Alt+1"
3814 copy_menu="Alt+c"
3815 action_menu="Alt+a"
3816 type_menu="Alt+t"
3817 help="Alt+h"
3818 switch="Alt+x"
3819 insert_pass="Alt+n"
3820 #+end_src
3821
3822 ** sway
3823
3824 *** main
3825 :PROPERTIES:
3826 :header-args+: :tangle ~/.config/sway/config
3827 :END:
3828
3829 #+begin_src conf
3830 ### Variables
3831 # super
3832 set $mod Mod4
3833 # alt
3834 set $mod2 Mod1
3835 set $left h
3836 set $down j
3837 set $up k
3838 set $right l
3839 set $term urxvt
3840 set $menu rofi -show run -display-run '> ' -display-window ' 🗔 '
3841
3842 ### Output configuration
3843 #
3844 # Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/)
3845 output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
3846 #
3847 # Example configuration:
3848 #
3849 #   output HDMI-A-1 resolution 1920x1080 position 1920,0
3850 #
3851 # You can get the names of your outputs by running: swaymsg -t get_outputs
3852
3853 ### Idle configuration
3854
3855 exec swayidle \
3856    timeout 120  '[ -f ~/.nosleep ] || swaymsg "output * dpms off"' \
3857         resume  '[ -f ~/.nosleep ] || swaymsg "output * dpms on"'  \
3858    before-sleep swaylock
3859
3860
3861 ### Key bindings
3862 #
3863 # Basics:
3864 #
3865     # start a terminal
3866     bindsym $mod+Return exec $term
3867
3868     # kill focused window
3869     bindsym $mod+Shift+q kill
3870
3871     # start your launcher
3872     bindsym $mod+d exec $menu
3873
3874     # password manager
3875     bindsym $mod2+space exec rofi-pass
3876
3877     # Drag floating windows by holding down $mod and left mouse button.
3878     # Resize them with right mouse button + $mod.
3879     # Despite the name, also works for non-floating windows.
3880     # Change normal to inverse to use left mouse button for resizing and right
3881     # mouse button for dragging.
3882     floating_modifier $mod normal
3883
3884     # reload the configuration file
3885     bindsym $mod+Shift+c reload
3886
3887     # exit sway (logs you out of your wayland session)
3888     bindsym $mod+Shift+e exit
3889
3890     bindsym $mod+apostrophe exec rofi-light        # rofi-based brightness chooser
3891     bindsym XF86MonBrightnessUp exec light -A 5    # increase screen brightness
3892     bindsym XF86MonBrightnessDown exec light -U 5  # decrease screen brightness
3893
3894     bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
3895     bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
3896     bindsym XF86AudioMute exec pamixer --toggle-mute
3897     bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
3898
3899     # original sway workspace switch and window move
3900     bindsym $mod+bracketleft workspace prev
3901     bindsym $mod+bracketright workspace next
3902     bindsym $mod+braceleft move container to workspace prev
3903     bindsym $mod+braceright move container to workspace next
3904
3905     # bspwm-esque workspace switch and window move
3906     bindsym $mod2+bracketleft exec sway-ws-util switch prev
3907     bindsym $mod2+bracketright exec sway-ws-util switch next
3908     bindsym $mod2+braceleft exec sway-ws-util move prev follow
3909     bindsym $mod2+braceright exec sway-ws-util move next follow
3910 #
3911 # Moving around:
3912 #
3913     # Move your focus around
3914     bindsym $mod+$left focus left
3915     bindsym $mod+$down focus down
3916     bindsym $mod+$up focus up
3917     bindsym $mod+$right focus right
3918     # or use $mod+[up|down|left|right]
3919     bindsym $mod+Left focus left
3920     bindsym $mod+Down focus down
3921     bindsym $mod+Up focus up
3922     bindsym $mod+Right focus right
3923
3924     # _move_ the focused window with the same, but add Shift
3925     bindsym $mod+Shift+$left move left
3926     bindsym $mod+Shift+$down move down
3927     bindsym $mod+Shift+$up move up
3928     bindsym $mod+Shift+$right move right
3929     # ditto, with arrow keys
3930     bindsym $mod+Shift+Left move left
3931     bindsym $mod+Shift+Down move down
3932     bindsym $mod+Shift+Up move up
3933     bindsym $mod+Shift+Right move right
3934 #
3935 # Workspaces:
3936 #
3937     # switch to workspace
3938     bindsym $mod+1 workspace 1
3939     bindsym $mod+2 workspace 2
3940     bindsym $mod+3 workspace 3
3941     bindsym $mod+4 workspace 4
3942     bindsym $mod+5 workspace 5
3943     bindsym $mod+6 workspace 6
3944     bindsym $mod+7 workspace 7
3945     bindsym $mod+8 workspace 8
3946     bindsym $mod+9 workspace 9
3947     bindsym $mod+0 workspace 10
3948     # move focused container to workspace
3949     bindsym $mod+Shift+1 move container to workspace 1
3950     bindsym $mod+Shift+2 move container to workspace 2
3951     bindsym $mod+Shift+3 move container to workspace 3
3952     bindsym $mod+Shift+4 move container to workspace 4
3953     bindsym $mod+Shift+5 move container to workspace 5
3954     bindsym $mod+Shift+6 move container to workspace 6
3955     bindsym $mod+Shift+7 move container to workspace 7
3956     bindsym $mod+Shift+8 move container to workspace 8
3957     bindsym $mod+Shift+9 move container to workspace 9
3958     bindsym $mod+Shift+0 move container to workspace 10
3959     # Note: workspaces can have any name you want, not just numbers.
3960     # We just use 1-10 as the default.
3961 #
3962 # Layout stuff:
3963 #
3964     # You can "split" the current object of your focus with
3965     # $mod+b or $mod+v, for horizontal and vertical splits
3966     # respectively.
3967     bindsym $mod+b splith
3968     bindsym $mod+v splitv
3969
3970     # Switch the current container between different layout styles
3971     bindsym $mod+s layout stacking
3972     bindsym $mod+w layout tabbed
3973     bindsym $mod+e layout toggle split
3974
3975     # Make the current focus fullscreen
3976     bindsym $mod+f fullscreen
3977
3978     # Toggle the current focus between tiling and floating mode
3979     bindsym $mod+Shift+space floating toggle
3980
3981     # Swap focus between the tiling area and the floating area
3982     bindsym $mod+space focus mode_toggle
3983
3984     # move focus to the parent container
3985     bindsym $mod+a focus parent
3986 #
3987 # Scratchpad:
3988 #
3989     # Sway has a "scratchpad", which is a bag of holding for windows.
3990     # You can send windows there and get them back later.
3991
3992     # Move the currently focused window to the scratchpad
3993     bindsym $mod+Shift+minus move scratchpad
3994
3995     # Show the next scratchpad window or hide the focused scratchpad window.
3996     # If there are multiple scratchpad windows, this command cycles through them.
3997     bindsym $mod+minus scratchpad show
3998 #
3999 # Resizing containers:
4000 #
4001 mode "resize" {
4002     # left will shrink the containers width
4003     # right will grow the containers width
4004     # up will shrink the containers height
4005     # down will grow the containers height
4006     bindsym $left resize shrink width 10px
4007     bindsym $down resize grow height 10px
4008     bindsym $up resize shrink height 10px
4009     bindsym $right resize grow width 10px
4010
4011     # ditto, with arrow keys
4012     bindsym Left resize shrink width 10px
4013     bindsym Down resize grow height 10px
4014     bindsym Up resize shrink height 10px
4015     bindsym Right resize grow width 10px
4016
4017     # return to default mode
4018     bindsym Return mode "default"
4019     bindsym Escape mode "default"
4020 }
4021 bindsym $mod+Shift+r mode "resize"
4022
4023 #
4024 # Power button
4025 #
4026
4027 set $mode_system System (l)ock, (e)xit sway, (s)uspend, (h)ibernate, (r)eboot, (S)hutdown
4028 mode "$mode_system" {
4029     bindsym l       exec swaylock,              mode "default"
4030     bindsym e       exec swaymsg exit,          mode "default"
4031     bindsym s       exec systemctl suspend,     mode "default"
4032     bindsym h       exec systemctl hibernate,   mode "default"
4033     bindsym r       exec systemctl reboot,      mode "default"
4034     bindsym Shift+s exec systemctl poweroff -i, mode "default"
4035
4036     # back to normal: Enter, Escape, or q
4037     bindsym Return mode "default"
4038     bindsym Escape mode "default"
4039     bindsym q      mode "default"
4040 }
4041 bindsym XF86PowerOff mode "$mode_system"
4042
4043 #
4044 # Presentation mode
4045 #
4046
4047 bindsym $mod+$mod2+p exec ([ ! -e ~/.nosleep ] && touch ~/.nosleep || rm ~/.nosleep) && killall -USR1 i3status
4048
4049 #
4050 # Notifications
4051 #
4052
4053 bindsym $mod+Shift+n mode notifications
4054 mode notifications {
4055     bindsym Return  exec makoctl invoke; exec makoctl dismiss; mode default
4056     bindsym d       exec makoctl dismiss; mode default
4057     bindsym Shift+d exec makoctl dismiss -a; mode default
4058
4059     bindsym Escape mode default
4060     bindsym q      mode default
4061 }
4062
4063 #
4064 # Screenshotting
4065 #
4066
4067 bindsym $mod+Shift+s mode screenshot
4068 mode screenshot {
4069     bindsym a exec grim $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
4070     bindsym r exec slurp | grim -g - $(xdg-user-dir PICTURES)/shots/$(date +'%Y-%m-%d-%H%M%S.png'); mode default
4071
4072     bindsym Escape mode default
4073     bindsym q      mode default
4074 }
4075
4076 #
4077 # Status Bar:
4078 #
4079 # Read `man 5 sway-bar` for more information about this section.
4080 bar {
4081     position bottom
4082     colors {
4083         statusline #ffffff
4084         background #323232
4085         inactive_workspace #32323200 #32323200 #5c5c5c
4086     }
4087     status_command i3status | my-i3status.py
4088 }
4089
4090 # font pango: benis uushi 9
4091 # font pango: Ubuntu Mono 11
4092 # font pango: Inconsolata 11
4093 font pango: DejaVu Sans Mono 9
4094 # font pango: Liberation Mono 9
4095
4096 exec xrdb .Xresources
4097 exec pgrep -x "systemd-inhibit" || \
4098      systemd-inhibit --what=handle-power-key --who=aminb \
4099      --why="Handle power button in sway" sleep infinity
4100 exec mako 2>&1 >/tmp/mako.log
4101 exec /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
4102
4103 include /etc/sway/config.d/*
4104 include ~/.config/sway/`hostname`
4105
4106 exec systemd-notify --ready || true
4107
4108 #+end_src
4109
4110 *** langa
4111 :PROPERTIES:
4112 :header-args+: :tangle ~/.config/sway/langa
4113 :END:
4114
4115 #+begin_src conf
4116 input "2:7:SynPS/2_Synaptics_TouchPad" {
4117     events disabled
4118     dwt enabled
4119     tap enabled
4120     natural_scroll enabled
4121     click_method clickfinger
4122 }
4123
4124 input "1:1:AT_Translated_Set_2_keyboard" {
4125     repeat_delay 200
4126     repeat_rate 45
4127     xkb_layout us_ab,ir
4128     xkb_options ctrl:nocaps,altwin:swap_alt_win,grp:shifts_toggle
4129 }
4130 #+end_src
4131
4132 *** shemshak
4133 :PROPERTIES:
4134 :header-args+: :tangle ~/.config/sway/shemshak
4135 :END:
4136
4137 #+begin_src conf
4138 input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
4139     dwt enabled
4140     tap enabled
4141     natural_scroll enabled
4142     middle_emulation enabled
4143     click_method clickfinger
4144 }
4145
4146 input "1:1:AT_Translated_Set_2_keyboard" {
4147     repeat_delay 200
4148     repeat_rate 45
4149     xkb_layout us,ir
4150     xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
4151 }
4152 #+end_src
4153 ** swaylock
4154 :PROPERTIES:
4155 :header-args+: :tangle ~/.config/swaylock/config
4156 :END:
4157
4158 #+begin_src conf
4159 image=/home/amin/usr/pics/wp/wp2445784-blurred-wallpapers.jpg
4160 scaling=fill
4161 #+end_src
4162
4163 ** TLP
4164
4165 *** langa
4166
4167 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "langa")) "/sudo::/etc/default/tlp")
4168 # ------------------------------------------------------------------------------
4169 # tlp - Parameters for power saving
4170 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
4171
4172 # Hint: some features are disabled by default, remove the leading # to enable
4173 # them.
4174
4175 # Set to 0 to disable, 1 to enable TLP.
4176 TLP_ENABLE=1
4177
4178 # Operation mode when no power supply can be detected: AC, BAT.
4179 # Concerns some desktop and embedded hardware only.
4180 TLP_DEFAULT_MODE=AC
4181
4182 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
4183 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
4184 TLP_PERSISTENT_DEFAULT=0
4185
4186 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
4187 # Non-zero value enables, zero disables laptop mode.
4188 DISK_IDLE_SECS_ON_AC=0
4189 DISK_IDLE_SECS_ON_BAT=2
4190
4191 # Dirty page values (timeouts in secs).
4192 MAX_LOST_WORK_SECS_ON_AC=15
4193 MAX_LOST_WORK_SECS_ON_BAT=60
4194
4195 # Hint: CPU parameters below are disabled by default, remove the leading #
4196 # to enable them, otherwise kernel default values are used.
4197
4198 # Select a CPU frequency scaling governor.
4199 # Intel Core i processor with intel_pstate driver:
4200 #   powersave(*), performance.
4201 # Older hardware with acpi-cpufreq driver:
4202 #   ondemand(*), powersave, performance, conservative, schedutil.
4203 # (*) is recommended.
4204 # Hint: use tlp-stat -p to show the active driver and available governors.
4205 # Important:
4206 #   powersave for intel_pstate and ondemand for acpi-cpufreq are power
4207 #   efficient for *almost all* workloads and therefore kernel and most
4208 #   distributions have chosen them as defaults. If you still want to change,
4209 #   you should know what you're doing! You *must* disable your distribution's
4210 #   governor settings or conflicts will occur.
4211 #CPU_SCALING_GOVERNOR_ON_AC=powersave
4212 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
4213
4214 # Set the min/max frequency available for the scaling governor.
4215 # Possible values strongly depend on your CPU. For available frequencies see
4216 # the output of tlp-stat -p.
4217 #CPU_SCALING_MIN_FREQ_ON_AC=0
4218 #CPU_SCALING_MAX_FREQ_ON_AC=0
4219 #CPU_SCALING_MIN_FREQ_ON_BAT=0
4220 #CPU_SCALING_MAX_FREQ_ON_BAT=0
4221
4222 # Set energy performance hints (HWP) for Intel P-state governor:
4223 #   performance, balance_performance, default, balance_power, power
4224 # Values are given in order of increasing power saving.
4225 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
4226 CPU_HWP_ON_AC=balance_performance
4227 CPU_HWP_ON_BAT=balance_power
4228
4229 # Set Intel P-state performance: 0..100 (%).
4230 # Limit the max/min P-state to control the power dissipation of the CPU.
4231 # Values are stated as a percentage of the available performance.
4232 # Requires an Intel Core i processor with intel_pstate driver.
4233 #CPU_MIN_PERF_ON_AC=0
4234 #CPU_MAX_PERF_ON_AC=100
4235 #CPU_MIN_PERF_ON_BAT=0
4236 #CPU_MAX_PERF_ON_BAT=30
4237
4238 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
4239 # Requires an Intel Core i processor.
4240 # Important:
4241 # - This may conflict with your distribution's governor settings
4242 # - A value of 1 does *not* activate boosting, it just allows it
4243 #CPU_BOOST_ON_AC=1
4244 #CPU_BOOST_ON_BAT=0
4245
4246 # Minimize number of used CPU cores/hyper-threads under light load conditions:
4247 #   0=disable, 1=enable.
4248 SCHED_POWERSAVE_ON_AC=0
4249 SCHED_POWERSAVE_ON_BAT=1
4250
4251 # Kernel NMI Watchdog:
4252 #   0=disable (default, saves power), 1=enable (for kernel debugging only).
4253 NMI_WATCHDOG=0
4254
4255 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
4256 # Frequency voltage pairs are written to:
4257 #   /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
4258 # CAUTION: only use this, if you thoroughly understand what you are doing!
4259 #PHC_CONTROLS="F:V F:V F:V F:V"
4260
4261 # Set CPU performance versus energy savings policy:
4262 #   performance, balance-performance, default, balance-power, power.
4263 # Values are given in order of increasing power saving.
4264 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
4265 ENERGY_PERF_POLICY_ON_AC=performance
4266 ENERGY_PERF_POLICY_ON_BAT=balance-power
4267
4268 # Disk devices; separate multiple devices with spaces (default: sda).
4269 # Devices can be specified by disk ID also (lookup with: tlp diskid).
4270 DISK_DEVICES="sda sdb"
4271
4272 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
4273 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
4274 # Separate values for multiple disks with spaces. Use the special value 'keep'
4275 # to keep the hardware default for the particular disk.
4276 DISK_APM_LEVEL_ON_AC="254 254"
4277 DISK_APM_LEVEL_ON_BAT="128 128"
4278
4279 # Hard disk spin down timeout:
4280 #   0:        spin down disabled
4281 #   1..240:   timeouts from 5s to 20min (in units of 5s)
4282 #   241..251: timeouts from 30min to 5.5 hours (in units of 30min)
4283 # See 'man hdparm' for details.
4284 # Separate values for multiple disks with spaces. Use the special value 'keep'
4285 # to keep the hardware default for the particular disk.
4286 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
4287 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
4288
4289 # Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
4290 # Separate values for multiple disks with spaces. Use the special value 'keep'
4291 # to keep the kernel default scheduler for the particular disk.
4292 #DISK_IOSCHED="cfq cfq"
4293
4294 # AHCI link power management (ALPM) for disk devices:
4295 #   min_power, med_power_with_dipm(*), medium_power, max_performance.
4296 # (*) Kernel >= 4.15 required, then recommended.
4297 # Multiple values separated with spaces are tried sequentially until success.
4298 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
4299 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
4300
4301 # Exclude host devices from AHCI link power management.
4302 # Separate multiple hosts with spaces.
4303 #SATA_LINKPWR_BLACKLIST="host1"
4304
4305 # Runtime Power Management for AHCI host and disks devices:
4306 #   on=disable, auto=enable.
4307 # EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
4308 #AHCI_RUNTIME_PM_ON_AC=on
4309 #AHCI_RUNTIME_PM_ON_BAT=on
4310
4311 # Seconds of inactivity before disk is suspended.
4312 AHCI_RUNTIME_PM_TIMEOUT=15
4313
4314 # PCI Express Active State Power Management (PCIe ASPM):
4315 #   default, performance, powersave.
4316 PCIE_ASPM_ON_AC=performance
4317 PCIE_ASPM_ON_BAT=powersave
4318
4319 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
4320 # auto = mid on BAT, high on AC; default = use hardware defaults.
4321 RADEON_POWER_PROFILE_ON_AC=high
4322 RADEON_POWER_PROFILE_ON_BAT=low
4323
4324 # Radeon dynamic power management method (DPM): battery, performance.
4325 RADEON_DPM_STATE_ON_AC=performance
4326 RADEON_DPM_STATE_ON_BAT=battery
4327
4328 # Radeon DPM performance level: auto, low, high; auto is recommended.
4329 RADEON_DPM_PERF_LEVEL_ON_AC=auto
4330 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4331
4332 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4333 WIFI_PWR_ON_AC=off
4334 WIFI_PWR_ON_BAT=on
4335
4336 # Disable wake on LAN: Y/N.
4337 WOL_DISABLE=Y
4338
4339 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4340 # A value of 0 disables, >=1 enables power saving (recommended: 1).
4341 SOUND_POWER_SAVE_ON_AC=0
4342 SOUND_POWER_SAVE_ON_BAT=0
4343
4344 # Disable controller too (HDA only): Y/N.
4345 SOUND_POWER_SAVE_CONTROLLER=N
4346
4347 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4348 # Drive can be powered on again by releasing (and reinserting) the eject lever
4349 # or by pressing the disc eject button on newer models.
4350 # Note: an UltraBay/MediaBay hard disk is never powered off.
4351 BAY_POWEROFF_ON_AC=0
4352 BAY_POWEROFF_ON_BAT=0
4353 # Optical drive device to power off (default sr0).
4354 BAY_DEVICE="sr0"
4355
4356 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4357 RUNTIME_PM_ON_AC=on
4358 RUNTIME_PM_ON_BAT=auto
4359
4360 # Exclude PCI(e) device adresses the following list from Runtime PM
4361 # (separate with spaces). Use lspci to get the adresses (1st column).
4362 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4363
4364 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4365 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4366 # prevents accidential power-on of dGPU in hybrid graphics setups.
4367 # Use "" to disable the feature completely.
4368 # Separate multiple drivers with spaces.
4369 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4370
4371 # Set to 0 to disable, 1 to enable USB autosuspend feature.
4372 USB_AUTOSUSPEND=1
4373
4374 # Exclude listed devices from USB autosuspend (separate with spaces).
4375 # Use lsusb to get the ids.
4376 # Note: input devices (usbhid) are excluded automatically
4377 #USB_BLACKLIST="1111:2222 3333:4444"
4378
4379 # Bluetooth devices are excluded from USB autosuspend:
4380 #   0=do not exclude, 1=exclude.
4381 USB_BLACKLIST_BTUSB=0
4382
4383 # Phone devices are excluded from USB autosuspend:
4384 #   0=do not exclude, 1=exclude (enable charging).
4385 USB_BLACKLIST_PHONE=0
4386
4387 # Printers are excluded from USB autosuspend:
4388 #   0=do not exclude, 1=exclude.
4389 USB_BLACKLIST_PRINTER=1
4390
4391 # WWAN devices are excluded from USB autosuspend:
4392 #   0=do not exclude, 1=exclude.
4393 USB_BLACKLIST_WWAN=1
4394
4395 # Include listed devices into USB autosuspend even if already excluded
4396 # by the blacklists above (separate with spaces).
4397 # Use lsusb to get the ids.
4398 #USB_WHITELIST="1111:2222 3333:4444"
4399
4400 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4401 # (workaround for USB devices that cause shutdown problems).
4402 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4403
4404 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4405 # on system startup: 0=disable, 1=enable.
4406 # Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4407 #   are ignored when this is enabled!
4408 #RESTORE_DEVICE_STATE_ON_STARTUP=0
4409 RESTORE_DEVICE_STATE_ON_STARTUP=0
4410
4411 # Radio devices to disable on startup: bluetooth, wifi, wwan.
4412 # Separate multiple devices with spaces.
4413 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
4414 DEVICES_TO_DISABLE_ON_STARTUP="bluetooth"
4415
4416 # Radio devices to enable on startup: bluetooth, wifi, wwan.
4417 # Separate multiple devices with spaces.
4418 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4419
4420 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4421 # (workaround for devices that are blocking shutdown).
4422 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4423
4424 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4425 # (to prevent other operating systems from missing radios).
4426 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4427
4428 # Radio devices to enable on AC: bluetooth, wifi, wwan.
4429 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4430
4431 # Radio devices to disable on battery: bluetooth, wifi, wwan.
4432 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4433
4434 # Radio devices to disable on battery when not in use (not connected):
4435 #   bluetooth, wifi, wwan.
4436 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4437
4438 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4439 # required). Charging starts when the remaining capacity falls below the
4440 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4441 # Main / Internal battery (values in %)
4442 #START_CHARGE_THRESH_BAT0=75
4443 #STOP_CHARGE_THRESH_BAT0=80
4444 # Ultrabay / Slice / Replaceable battery (values in %)
4445 #START_CHARGE_THRESH_BAT1=75
4446 #STOP_CHARGE_THRESH_BAT1=80
4447
4448 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4449 #RESTORE_THRESHOLDS_ON_BAT=1
4450
4451 # ------------------------------------------------------------------------------
4452 # tlp-rdw - Parameters for the radio device wizard
4453 # Possible devices: bluetooth, wifi, wwan.
4454
4455 # Hints:
4456 # - Parameters are disabled by default, remove the leading # to enable them
4457 # - Separate multiple radio devices with spaces
4458
4459 # Radio devices to disable on connect.
4460 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4461 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4462 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4463
4464 # Radio devices to enable on disconnect.
4465 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4466 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4467 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4468
4469 # Radio devices to enable/disable when docked.
4470 #DEVICES_TO_ENABLE_ON_DOCK=""
4471 #DEVICES_TO_DISABLE_ON_DOCK=""
4472
4473 # Radio devices to enable/disable when undocked.
4474 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4475 #DEVICES_TO_DISABLE_ON_UNDOCK=""
4476 #+end_src
4477
4478 *** shemshak
4479
4480 #+begin_src conf :tangle (when (and (eq system-type 'gnu/linux) (string= (system-name) "shemshak")) "/sudo::/etc/default/tlp")
4481 # ------------------------------------------------------------------------------
4482 # tlp - Parameters for power saving
4483 # See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
4484
4485 # Hint: some features are disabled by default, remove the leading # to enable
4486 # them.
4487
4488 # Set to 0 to disable, 1 to enable TLP.
4489 TLP_ENABLE=1
4490
4491 # Operation mode when no power supply can be detected: AC, BAT.
4492 # Concerns some desktop and embedded hardware only.
4493 TLP_DEFAULT_MODE=AC
4494
4495 # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
4496 # Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
4497 TLP_PERSISTENT_DEFAULT=0
4498
4499 # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
4500 # Non-zero value enables, zero disables laptop mode.
4501 DISK_IDLE_SECS_ON_AC=0
4502 DISK_IDLE_SECS_ON_BAT=2
4503
4504 # Dirty page values (timeouts in secs).
4505 MAX_LOST_WORK_SECS_ON_AC=15
4506 MAX_LOST_WORK_SECS_ON_BAT=60
4507
4508 # Hint: CPU parameters below are disabled by default, remove the leading #
4509 # to enable them, otherwise kernel default values are used.
4510
4511 # Select a CPU frequency scaling governor.
4512 # Intel Core i processor with intel_pstate driver:
4513 #   powersave(*), performance.
4514 # Older hardware with acpi-cpufreq driver:
4515 #   ondemand(*), powersave, performance, conservative, schedutil.
4516 # (*) is recommended.
4517 # Hint: use tlp-stat -p to show the active driver and available governors.
4518 # Important:
4519 #   powersave for intel_pstate and ondemand for acpi-cpufreq are power
4520 #   efficient for *almost all* workloads and therefore kernel and most
4521 #   distributions have chosen them as defaults. If you still want to change,
4522 #   you should know what you're doing! You *must* disable your distribution's
4523 #   governor settings or conflicts will occur.
4524 #CPU_SCALING_GOVERNOR_ON_AC=powersave
4525 #CPU_SCALING_GOVERNOR_ON_BAT=powersave
4526
4527 # Set the min/max frequency available for the scaling governor.
4528 # Possible values strongly depend on your CPU. For available frequencies see
4529 # the output of tlp-stat -p.
4530 #CPU_SCALING_MIN_FREQ_ON_AC=0
4531 #CPU_SCALING_MAX_FREQ_ON_AC=0
4532 #CPU_SCALING_MIN_FREQ_ON_BAT=0
4533 #CPU_SCALING_MAX_FREQ_ON_BAT=0
4534
4535 # Set energy performance hints (HWP) for Intel P-state governor:
4536 #   performance, balance_performance, default, balance_power, power
4537 # Values are given in order of increasing power saving.
4538 # Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
4539 CPU_HWP_ON_AC=balance_performance
4540 CPU_HWP_ON_BAT=balance_power
4541
4542 # Set Intel P-state performance: 0..100 (%).
4543 # Limit the max/min P-state to control the power dissipation of the CPU.
4544 # Values are stated as a percentage of the available performance.
4545 # Requires an Intel Core i processor with intel_pstate driver.
4546 #CPU_MIN_PERF_ON_AC=0
4547 #CPU_MAX_PERF_ON_AC=100
4548 #CPU_MIN_PERF_ON_BAT=0
4549 #CPU_MAX_PERF_ON_BAT=30
4550
4551 # Set the CPU "turbo boost" feature: 0=disable, 1=allow
4552 # Requires an Intel Core i processor.
4553 # Important:
4554 # - This may conflict with your distribution's governor settings
4555 # - A value of 1 does *not* activate boosting, it just allows it
4556 #CPU_BOOST_ON_AC=1
4557 #CPU_BOOST_ON_BAT=0
4558
4559 # Minimize number of used CPU cores/hyper-threads under light load conditions:
4560 #   0=disable, 1=enable.
4561 SCHED_POWERSAVE_ON_AC=0
4562 SCHED_POWERSAVE_ON_BAT=1
4563
4564 # Kernel NMI Watchdog:
4565 #   0=disable (default, saves power), 1=enable (for kernel debugging only).
4566 NMI_WATCHDOG=0
4567
4568 # Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
4569 # Frequency voltage pairs are written to:
4570 #   /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
4571 # CAUTION: only use this, if you thoroughly understand what you are doing!
4572 #PHC_CONTROLS="F:V F:V F:V F:V"
4573
4574 # Set CPU performance versus energy savings policy:
4575 #   performance, balance-performance, default, balance-power, power.
4576 # Values are given in order of increasing power saving.
4577 # Requires kernel module msr and x86_energy_perf_policy from linux-tools.
4578 ENERGY_PERF_POLICY_ON_AC=performance
4579 ENERGY_PERF_POLICY_ON_BAT=balance-power
4580
4581 # Disk devices; separate multiple devices with spaces (default: sda).
4582 # Devices can be specified by disk ID also (lookup with: tlp diskid).
4583 DISK_DEVICES="sda sdb"
4584
4585 # Disk advanced power management level: 1..254, 255 (max saving, min, off).
4586 # Levels 1..127 may spin down the disk; 255 allowable on most drives.
4587 # Separate values for multiple disks with spaces. Use the special value 'keep'
4588 # to keep the hardware default for the particular disk.
4589 DISK_APM_LEVEL_ON_AC="254 254"
4590 DISK_APM_LEVEL_ON_BAT="128 128"
4591
4592 # Hard disk spin down timeout:
4593 #   0:        spin down disabled
4594 #   1..240:   timeouts from 5s to 20min (in units of 5s)
4595 #   241..251: timeouts from 30min to 5.5 hours (in units of 30min)
4596 # See 'man hdparm' for details.
4597 # Separate values for multiple disks with spaces. Use the special value 'keep'
4598 # to keep the hardware default for the particular disk.
4599 #DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
4600 #DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
4601
4602 # Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
4603 # Separate values for multiple disks with spaces. Use the special value 'keep'
4604 # to keep the kernel default scheduler for the particular disk.
4605 #DISK_IOSCHED="cfq cfq"
4606
4607 # AHCI link power management (ALPM) for disk devices:
4608 #   min_power, med_power_with_dipm(*), medium_power, max_performance.
4609 # (*) Kernel >= 4.15 required, then recommended.
4610 # Multiple values separated with spaces are tried sequentially until success.
4611 SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
4612 SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
4613
4614 # Exclude host devices from AHCI link power management.
4615 # Separate multiple hosts with spaces.
4616 #SATA_LINKPWR_BLACKLIST="host1"
4617
4618 # Runtime Power Management for AHCI host and disks devices:
4619 #   on=disable, auto=enable.
4620 # EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
4621 #AHCI_RUNTIME_PM_ON_AC=on
4622 #AHCI_RUNTIME_PM_ON_BAT=on
4623
4624 # Seconds of inactivity before disk is suspended.
4625 AHCI_RUNTIME_PM_TIMEOUT=15
4626
4627 # PCI Express Active State Power Management (PCIe ASPM):
4628 #   default, performance, powersave.
4629 PCIE_ASPM_ON_AC=performance
4630 PCIE_ASPM_ON_BAT=powersave
4631
4632 # Radeon graphics clock speed (profile method): low, mid, high, auto, default;
4633 # auto = mid on BAT, high on AC; default = use hardware defaults.
4634 RADEON_POWER_PROFILE_ON_AC=high
4635 RADEON_POWER_PROFILE_ON_BAT=low
4636
4637 # Radeon dynamic power management method (DPM): battery, performance.
4638 RADEON_DPM_STATE_ON_AC=performance
4639 RADEON_DPM_STATE_ON_BAT=battery
4640
4641 # Radeon DPM performance level: auto, low, high; auto is recommended.
4642 RADEON_DPM_PERF_LEVEL_ON_AC=auto
4643 RADEON_DPM_PERF_LEVEL_ON_BAT=auto
4644
4645 # WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
4646 WIFI_PWR_ON_AC=off
4647 WIFI_PWR_ON_BAT=on
4648
4649 # Disable wake on LAN: Y/N.
4650 WOL_DISABLE=Y
4651
4652 # Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
4653 # A value of 0 disables, >=1 enables power saving (recommended: 1).
4654 SOUND_POWER_SAVE_ON_AC=0
4655 SOUND_POWER_SAVE_ON_BAT=0
4656
4657 # Disable controller too (HDA only): Y/N.
4658 SOUND_POWER_SAVE_CONTROLLER=N
4659
4660 # Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
4661 # Drive can be powered on again by releasing (and reinserting) the eject lever
4662 # or by pressing the disc eject button on newer models.
4663 # Note: an UltraBay/MediaBay hard disk is never powered off.
4664 BAY_POWEROFF_ON_AC=0
4665 BAY_POWEROFF_ON_BAT=0
4666 # Optical drive device to power off (default sr0).
4667 BAY_DEVICE="sr0"
4668
4669 # Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
4670 RUNTIME_PM_ON_AC=on
4671 RUNTIME_PM_ON_BAT=auto
4672
4673 # Exclude PCI(e) device adresses the following list from Runtime PM
4674 # (separate with spaces). Use lspci to get the adresses (1st column).
4675 #RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
4676 RUNTIME_PM_BLACKLIST="01:00.0"
4677
4678 # Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
4679 # Default when unconfigured is "amdgpu nouveau nvidia radeon" which
4680 # prevents accidential power-on of dGPU in hybrid graphics setups.
4681 # Use "" to disable the feature completely.
4682 # Separate multiple drivers with spaces.
4683 #RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
4684
4685 # Set to 0 to disable, 1 to enable USB autosuspend feature.
4686 USB_AUTOSUSPEND=1
4687
4688 # Exclude listed devices from USB autosuspend (separate with spaces).
4689 # Use lsusb to get the ids.
4690 # Note: input devices (usbhid) are excluded automatically
4691 #USB_BLACKLIST="1111:2222 3333:4444"
4692
4693 # Bluetooth devices are excluded from USB autosuspend:
4694 #   0=do not exclude, 1=exclude.
4695 USB_BLACKLIST_BTUSB=0
4696
4697 # Phone devices are excluded from USB autosuspend:
4698 #   0=do not exclude, 1=exclude (enable charging).
4699 USB_BLACKLIST_PHONE=0
4700
4701 # Printers are excluded from USB autosuspend:
4702 #   0=do not exclude, 1=exclude.
4703 USB_BLACKLIST_PRINTER=1
4704
4705 # WWAN devices are excluded from USB autosuspend:
4706 #   0=do not exclude, 1=exclude.
4707 USB_BLACKLIST_WWAN=1
4708
4709 # Include listed devices into USB autosuspend even if already excluded
4710 # by the blacklists above (separate with spaces).
4711 # Use lsusb to get the ids.
4712 #USB_WHITELIST="1111:2222 3333:4444"
4713
4714 # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
4715 # (workaround for USB devices that cause shutdown problems).
4716 #USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
4717
4718 # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
4719 # on system startup: 0=disable, 1=enable.
4720 # Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
4721 #   are ignored when this is enabled!
4722 #RESTORE_DEVICE_STATE_ON_STARTUP=0
4723 RESTORE_DEVICE_STATE_ON_STARTUP=1
4724
4725 # Radio devices to disable on startup: bluetooth, wifi, wwan.
4726 # Separate multiple devices with spaces.
4727 #DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
4728
4729 # Radio devices to enable on startup: bluetooth, wifi, wwan.
4730 # Separate multiple devices with spaces.
4731 #DEVICES_TO_ENABLE_ON_STARTUP="wifi"
4732
4733 # Radio devices to disable on shutdown: bluetooth, wifi, wwan.
4734 # (workaround for devices that are blocking shutdown).
4735 #DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
4736
4737 # Radio devices to enable on shutdown: bluetooth, wifi, wwan.
4738 # (to prevent other operating systems from missing radios).
4739 #DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
4740
4741 # Radio devices to enable on AC: bluetooth, wifi, wwan.
4742 #DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
4743
4744 # Radio devices to disable on battery: bluetooth, wifi, wwan.
4745 #DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
4746
4747 # Radio devices to disable on battery when not in use (not connected):
4748 #   bluetooth, wifi, wwan.
4749 #DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
4750
4751 # Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
4752 # required). Charging starts when the remaining capacity falls below the
4753 # START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
4754 # Main / Internal battery (values in %)
4755 #START_CHARGE_THRESH_BAT0=75
4756 #STOP_CHARGE_THRESH_BAT0=80
4757 # Ultrabay / Slice / Replaceable battery (values in %)
4758 #START_CHARGE_THRESH_BAT1=75
4759 #STOP_CHARGE_THRESH_BAT1=80
4760
4761 # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
4762 #RESTORE_THRESHOLDS_ON_BAT=1
4763
4764 # ------------------------------------------------------------------------------
4765 # tlp-rdw - Parameters for the radio device wizard
4766 # Possible devices: bluetooth, wifi, wwan.
4767
4768 # Hints:
4769 # - Parameters are disabled by default, remove the leading # to enable them
4770 # - Separate multiple radio devices with spaces
4771
4772 # Radio devices to disable on connect.
4773 #DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
4774 #DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
4775 #DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
4776
4777 # Radio devices to enable on disconnect.
4778 #DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
4779 #DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
4780 #DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
4781
4782 # Radio devices to enable/disable when docked.
4783 #DEVICES_TO_ENABLE_ON_DOCK=""
4784 #DEVICES_TO_DISABLE_ON_DOCK=""
4785
4786 # Radio devices to enable/disable when undocked.
4787 #DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
4788 #DEVICES_TO_DISABLE_ON_UNDOCK=""
4789 #+end_src
4790
4791 ** X
4792
4793 *** xprofile
4794 :PROPERTIES:
4795 :header-args+: :tangle ~/.xprofile
4796 :END:
4797
4798 =~/.xprofile= is similar in style to =~/.xinitrc=, but on the
4799 contrary, it's automatically sourced by LightDM, my display manager of
4800 choice.
4801
4802 #+begin_src sh :tangle no
4803 xset -b  # disable bell
4804 xset r rate 200 45  # repeat delay (ms) and rate (repeats/sec)
4805
4806 # setxkbmap -option compose:ralt
4807
4808 setxkbmap -option ctrl:nocaps          # turn capslock into control
4809 setxkbmap -option altwin:swap_alt_win  # swap alt and super
4810
4811 if [ $(hostname) = "plasma" ]
4812 then
4813     setxkbmap -option ctrl:rctrl_ralt  # turn right control into right alt
4814 fi
4815
4816 if [ $(hostname) = "enigma" ]
4817 then
4818     xmodmap -e "keycode 135 = Alt_R"  # remap menu key to alt
4819 fi
4820
4821 light -Scrs "intel_backlight" 2
4822
4823 source $HOME/.zprofile
4824
4825 export _JAVA_AWT_WM_NONREPARENTING=1
4826 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
4827
4828 if [ $(hostname) = "plasma" ]
4829 then
4830     unlock-def-gk.py &
4831 fi
4832
4833 bspwm &
4834 #+end_src
4835
4836 *** X resources
4837
4838 **** Xresources
4839 :PROPERTIES:
4840 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources")
4841 :END:
4842
4843 #+begin_src conf-xdefaults
4844 #include ".Xresources.d/fonts"
4845 ! #include ".Xresources.d/colors"
4846 #include ".Xresources.d/emacs"
4847 #include ".Xresources.d/rxvt-unicode"
4848 #+end_src
4849
4850 **** Xresources.d
4851
4852 ***** fonts
4853 :PROPERTIES:
4854 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/fonts")
4855 :END:
4856
4857 #+begin_src conf-xdefaults
4858 Xft.lcdfilter: lcddefault
4859 Xft.antialias: true
4860 Xft.autohint: 0
4861 Xft.hinting: true
4862 Xft.hintstyle: hintslight
4863 ! Xft.hintstyle: hintfull
4864 Xft.rgba: rgb
4865 Xft.dpi: 96
4866 #+end_src
4867
4868 ***** colors
4869 :PROPERTIES:
4870 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/colors")
4871 :END:
4872
4873 #+begin_src conf-xdefaults :tangle no
4874 #include "gruvbox-light.xresources"
4875 ! #include "gruvbox-dark.xresources"
4876 #include "gruvbox-urxvt256.xresources"
4877 #+end_src
4878
4879 #+begin_src conf-xdefaults :tangle no
4880 ! -----------------------------------------------------------------------------
4881 ! File: gruvbox-light.xresources
4882 ! Description: Retro groove colorscheme generalized
4883 ! Author: morhetz <morhetz@gmail.com>
4884 ! Source: https://github.com/morhetz/gruvbox-generalized
4885 ! Last Modified: 6 Sep 2014
4886 ! -----------------------------------------------------------------------------
4887
4888 ! hard contrast: *background: #f9f5d7
4889 *background: #fbf1c7
4890 ! soft contrast: *background: #f2e5bc
4891 *foreground: #3c3836
4892 ! Black + DarkGrey
4893 *color0:  #fdf4c1
4894 *color8:  #928374
4895 ! DarkRed + Red
4896 *color1:  #cc241d
4897 *color9:  #9d0006
4898 ! DarkGreen + Green
4899 *color2:  #98971a
4900 *color10: #79740e
4901 ! DarkYellow + Yellow
4902 *color3:  #d79921
4903 *color11: #b57614
4904 ! DarkBlue + Blue
4905 *color4:  #458588
4906 *color12: #076678
4907 ! DarkMagenta + Magenta
4908 *color5:  #b16286
4909 *color13: #8f3f71
4910 ! DarkCyan + Cyan
4911 *color6:  #689d6a
4912 *color14: #427b58
4913 ! LightGrey + White
4914 *color7:  #7c6f64
4915 *color15: #3c3836
4916 #+end_src
4917
4918 #+begin_src conf-xdefaults :tangle no
4919 ! -----------------------------------------------------------------------------
4920 ! File: gruvbox-dark.xresources
4921 ! Description: Retro groove colorscheme generalized
4922 ! Author: morhetz <morhetz@gmail.com>
4923 ! Source: https://github.com/morhetz/gruvbox-generalized
4924 ! Last Modified: 6 Sep 2014
4925 ! -----------------------------------------------------------------------------
4926
4927 ! hard contrast: *background: #1d2021
4928 *background: #282828
4929 ! soft contrast: *background: #32302f
4930 *foreground: #ebdbb2
4931 ! Black + DarkGrey
4932 *color0:  #282828
4933 *color8:  #928374
4934 ! DarkRed + Red
4935 *color1:  #cc241d
4936 *color9:  #fb4934
4937 ! DarkGreen + Green
4938 *color2:  #98971a
4939 *color10: #b8bb26
4940 ! DarkYellow + Yellow
4941 *color3:  #d79921
4942 *color11: #fabd2f
4943 ! DarkBlue + Blue
4944 *color4:  #458588
4945 *color12: #83a598
4946 ! DarkMagenta + Magenta
4947 *color5:  #b16286
4948 *color13: #d3869b
4949 ! DarkCyan + Cyan
4950 *color6:  #689d6a
4951 *color14: #8ec07c
4952 ! LightGrey + White
4953 *color7:  #a89984
4954 *color15: #ebdbb2
4955 #+end_src
4956
4957 #+begin_src conf-xdefaults :tangle no
4958 ! -----------------------------------------------------------------------------
4959 ! File: gruvbox-urxvt256.xresources
4960 ! Description: Retro groove colorscheme generalized
4961 ! Author: morhetz <morhetz@gmail.com>
4962 ! Source: https://github.com/morhetz/gruvbox-generalized
4963 ! Last Modified: 13 Dec 2013
4964 ! -----------------------------------------------------------------------------
4965
4966 URxvt.color24:  #076678
4967 URxvt.color66:  #427b58
4968 URxvt.color88:  #9d0006
4969 URxvt.color96:  #8f3f71
4970 URxvt.color100: #79740e
4971 URxvt.color108: #8ec07c
4972 URxvt.color109: #83a598
4973 URxvt.color130: #af3a03
4974 URxvt.color136: #b57614
4975 URxvt.color142: #b8bb26
4976 URxvt.color167: #fb4934
4977 URxvt.color175: #d3869b
4978 URxvt.color208: #fe8019
4979 URxvt.color214: #fabd2f
4980 URxvt.color223: #ebdbb2
4981 URxvt.color228: #f2e5bc
4982 URxvt.color229: #fbf1c7
4983 URxvt.color230: #f9f5d7
4984 URxvt.color234: #1d2021
4985 URxvt.color235: #282828
4986 URxvt.color236: #32302f
4987 URxvt.color237: #3c3836
4988 URxvt.color239: #504945
4989 URxvt.color241: #665c54
4990 URxvt.color243: #7c6f64
4991 URxvt.color244: #928374
4992 URxvt.color245: #928374
4993 URxvt.color246: #a89984
4994 URxvt.color248: #bdae93
4995 URxvt.color250: #d5c4a1
4996 #+end_src
4997
4998 ***** emacs
4999 :PROPERTIES:
5000 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/emacs")
5001 :END:
5002
5003 #+begin_src conf-xdefaults
5004 Emacs.menuBar: off
5005 Emacs.toolBar: off
5006 Emacs.verticalScrollBars: off
5007 Emacs.cursorBlink: off
5008 Emacs.FontBackend: xft,x
5009 ! Emacs.font: Ubuntu Mono-12
5010 ! Emacs.font: Triplicate T4C-11
5011 ! Emacs.font: Ubuntu Mono-10.5
5012 ! Emacs.font: Ubuntu Mono-12
5013 ! Emacs.font: Iosevka-11
5014
5015 ! Emacs.font: Fira Mono:size=15
5016 ! Emacs.font: DejaVu Sans Mono:size=15
5017 ! Emacs.font: Inconsolata:size=17
5018 ! Emacs.font: Inconsolata:size=16
5019 ! Emacs.font: Inconsolata LGC:size=14
5020 ! Emacs.font: Source Code Pro Medium-10.5
5021 Emacs.font: Source Code Pro:size=14
5022 ! Emacs.font: Ubuntu Mono:size=16
5023 ! Emacs.font: Iosevka:size=16
5024 #+end_src
5025
5026 ***** rxvt-unicode
5027 :PROPERTIES:
5028 :header-args+: :tangle (when (eq system-type 'gnu/linux) "~/.Xresources.d/rxvt-unicode")
5029 :END:
5030
5031 #+begin_src conf-xdefaults
5032 ! Font
5033 URxvt.font:             xft:source code pro:pixelsize=14:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
5034 URxvt.boldFont:         xft:source code pro semibold:pixelsize=14:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
5035 URxvt.italicFont:       xft:source code pro italic:pixelsize=14:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
5036 URxvt.bolditalicFont:   xft:source code pro semibold italic:pixelsize=14:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
5037
5038 URxvt.xftAntialias:     true
5039 URxvt.letterSpace:      0
5040
5041 URxvt.depth:                0
5042 URxvt.loginShell:           true
5043 URxvt.saveLines:            100000
5044 URxvt.internalBorder:       3
5045 URxvt.lineSpace:            0
5046 URxvt.scrollBar:            false
5047 URxvt.scrollStyle:          rxvt
5048 URxvt*scrollTtyOutput:      false
5049 URxvt*scrollWithBuffer:     true
5050 URxvt*scrollTtyKeypress:    true
5051 URxvt.keysym.Shift-Up:      command:\033]720;1\007
5052 URxvt.keysym.Shift-Down:    command:\033]721;1\007
5053
5054 URxvt.perl-ext-common:      default,clipboard,url-select,keyboard-select
5055 URxvt.url-select.launcher:  firefox
5056 URxvt.url-select.underline: true
5057 URxvt.keysym.M-u:           perl:url-select:select_next
5058 URxvt.keysym.M-Escape:      perl:keyboard-select:activate
5059 URxvt.keysym.M-s:           perl:keyboard-select:search
5060 URxvt.url-launcher:         /usr/bin/firefox
5061 URxvt.matcher.button:       1
5062 URxvt.iso14755:             false
5063 URxvt.iso14755_53:          false
5064 URxvt.keysym.M-c:           perl:clipboard:copy
5065 URxvt.keysym.M-v:           perl:clipboard:paste
5066 URxvt.keysym.C-A-V:         perl:clipboard:paste_escaped
5067 URxvt.keysym.C-Up:          font-size:increase
5068 URxvt.keysym.C-Down:        font-size:decrease
5069 URxvt.keysym.C-S-Up:        font-size:incglobal
5070 URxvt.keysym.C-S-Down:      font-size:decglobal
5071 URxvt.keysym.C-equal:       font-size:reset
5072 !URxvt.keysym.C-question:   font-size:show
5073
5074 URxvt.iconFile:             /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
5075
5076 !urxvt*foreground: white
5077 !urxvt*background: black
5078
5079 !*color0:  #2E3436
5080 !*color1:  #a40000
5081 !*color2:  #4E9A06
5082 !*color3:  #C4A000
5083 !*color4:  #3465A4
5084 !*color5:  #75507B
5085 !*color6:  #ce5c00
5086 !*color7:  #babdb9
5087 !*color8:  #555753
5088 !*color9:  #EF2929
5089 !*color10: #8AE234
5090 !*color11: #FCE94F
5091 !*color12: #729FCF
5092 !*color13: #AD7FA8
5093 !*color14: #fcaf3e
5094 !*color15: #EEEEEC
5095
5096 !URxvt.foreground: #C8C8C8
5097 !URxvt.background: #FFFFFF
5098
5099 !! black
5100 !*color0:  #2E3436
5101 !*color8:  #555753
5102 !! red
5103 !*color1:  #a40000
5104 !*color9:  #EF2929
5105 !! green
5106 !*color2:  #4E9A06
5107 !*color10: #8AE234
5108 !! yellow
5109 !*color3:  #C4A000
5110 !*color11: #FCE94F
5111 !! blue
5112 !*color4:  #3465A4
5113 !*color12: #729FCF
5114 !! purple
5115 !*color5:  #75507B
5116 !*color13: #AD7FA8
5117 !! orange (replaces cyan)
5118 !*color6:  #ce5c00
5119 !*color14: #fcaf3e
5120 !! white
5121 !*color7:  #babdb9
5122 !*color15: #EEEEEC
5123
5124 ! Tango colour theme for rxvt-unicode
5125 URxvt.background: #FFFFFF
5126 URxvt.foreground: #000000
5127
5128 ! Black
5129 URxvt.color0: #2E3436
5130 URxvt.color8: #757773
5131
5132 ! Red
5133 URxvt.color1: #CC0000
5134 URxvt.color9: #EF2929
5135
5136 ! Green
5137 URxvt.color2: #4E9A06
5138 URxvt.color10: #8AE234
5139
5140 ! Yellow
5141 URxvt.color3: #C4A000
5142 URxvt.color11: #FCE94F
5143
5144 ! Blue
5145 URxvt.color4: #3465A4
5146 URxvt.color12: #729FCF
5147
5148 ! Magenta
5149 URxvt.color5: #75507B
5150 URxvt.color13: #AD7FA8
5151
5152 !! Cyan
5153 !URxvt.color6: #06989A
5154 !URxvt.color14: #34E2E2
5155 ! orange (replaces cyan)
5156 ,*color6:  #ce5c00
5157 ,*color14: #fcaf3e
5158
5159 ! White
5160 URxvt.color7: #D3D7CF
5161 URxvt.color15: #EEEEEC
5162 #+end_src
5163
5164 *** xkb us_ab keyboard layout
5165
5166 #+begin_src conf :tangle "/sudo::/usr/share/X11/xkb/symbols/us_ab" :comments none
5167 default partial alphanumeric_keys
5168 xkb_symbols "us_ab" {
5169     include "us(basic)"
5170     name[Group1]= "English (US)(aminb)";
5171
5172     key <MENU> { [ Alt_R ] };
5173 };
5174 #+end_src
5175
5176 ** XDG
5177 :PROPERTIES:
5178 :header-args+: :tangle ~/.config/user-dirs.dirs
5179 :END:
5180
5181 #+begin_src conf
5182 XDG_DESKTOP_DIR="$HOME/Desktop"
5183 XDG_DOCUMENTS_DIR="$HOME/usr/docs"
5184 XDG_DOWNLOAD_DIR="$HOME/usr/dls"
5185 XDG_MUSIC_DIR="$HOME/usr/music"
5186 XDG_PICTURES_DIR="$HOME/usr/pics"
5187 XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
5188 XDG_TEMPLATES_DIR="$HOME/usr/Templates"
5189 XDG_VIDEOS_DIR="$HOME/usr/vids"
5190 #+end_src
5191
5192 ** Zathura
5193 :PROPERTIES:
5194 :header-args+: :tangle ~/.config/zathura/zathurarc
5195 :END:
5196
5197 #+begin_src conf
5198 set smooth-scroll true
5199 set selection-clipboard clipboard
5200 set zoom-step 05
5201 set default-bg "#272727"
5202 set statusbar-bg "#272727"
5203 set inputbar-bg "#373737"
5204 #+end_src
5205
5206 ** Zsh
5207
5208 My zsh setup is built on [[https://github.com/zimfw/zimfw][Zim]]. Further, my zshrc references [[https://github.com/junegunn/fzf][fzf]],
5209 [[https://github.com/zsh-users/zsh-autosuggestions][zsh-autosuggestions]], and [[https://github.com/hlissner/zsh-autopair][zsh-autopair]]; so be sure to have them
5210 installed.
5211
5212 *** zimrc
5213 :PROPERTIES:
5214 :header-args+: :tangle ~/.zimrc
5215 :END:
5216
5217 #+begin_src sh
5218
5219
5220 #################
5221 # CORE SETTINGS #
5222 #################
5223
5224 #
5225 # Zim settings
5226 #
5227
5228 # Select what modules you would like enabled.
5229 # The second line of modules may depend on options set by modules in the first
5230 # line. These dependencies are noted on the respective module's README.md.
5231 zmodules=(directory environment git git-info history input ssh utility custom \
5232           syntax-highlighting history-substring-search prompt completion)
5233
5234
5235 ###################
5236 # MODULE SETTINGS #
5237 ###################
5238
5239 #
5240 # Prompt
5241 #
5242
5243 # Set your desired prompt here
5244 zprompt_theme='pure'
5245 #PURE_PROMPT_SYMBOL=λ
5246 #PURE_PROMPT_SYMBOL=δ
5247 PURE_PROMPT_SYMBOL=➜
5248
5249 #
5250 # Completion
5251 #
5252
5253 # set an optional host-specific filename for the completion cache file
5254 # if none is provided, the default '.zcompdump' is used.
5255 #zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
5256
5257 #
5258 # Utility
5259 #
5260
5261 # Uncomment to enable command correction prompts
5262 # See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
5263 setopt CORRECT
5264
5265 #
5266 # Environment
5267 #
5268
5269 # Set the string below to the desired terminal title format string.
5270 # The terminal title is redrawn upon directory change, however, variables like
5271 # ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
5272 #   http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
5273 # The example below uses the following format: 'username@host:/current/directory'
5274 ztermtitle='%n@%m:%~'
5275
5276 #
5277 # Input
5278 #
5279
5280 # Uncomment to enable double-dot expansion.
5281 # This appends '../' to your input for each '.' you type after an initial '..'
5282 #zdouble_dot_expand='true'
5283
5284 #
5285 # Syntax-Highlighting
5286 #
5287
5288 # This determines what highlighters will be used with the syntax-highlighting module.
5289 # Documentation of the highlighters can be found here:
5290 #   https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
5291 # For (u)rxvt, termite and gnome-terminal users,
5292 # removing the 'cursor' highlighter will fix the disappearing cursor problem
5293 #zhighlighters=(main brackets cursor)
5294 zhighlighters=(main brackets pattern)
5295
5296
5297 #
5298 # SSH
5299 #
5300
5301 # Load these ssh identities with the ssh module
5302 zssh_ids=(id_ed25519_bandali)
5303
5304
5305 #
5306 # Pacman
5307 #
5308
5309 # Set (optional) pacman front-end.
5310 zpacman_frontend='yay'
5311
5312 # Load any helper scripts as defined here
5313 #zpacman_helper=(aur)
5314 #+end_src
5315
5316 *** zlogin
5317 :PROPERTIES:
5318 :header-args+: :tangle ~/.zlogin
5319 :END:
5320
5321 #+begin_src sh
5322
5323
5324 #
5325 # User configuration sourced by login shells
5326 #
5327
5328 # Initialize zim
5329 [[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh
5330 #+end_src
5331
5332 *** zprofile
5333 :PROPERTIES:
5334 :header-args+: :tangle ~/.zprofile
5335 :END:
5336
5337 #+begin_src sh
5338 #PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
5339 #PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
5340 export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
5341 export XDG_CONFIG_HOME=$HOME/.config
5342 export XDG_DATA_HOME=$HOME/.local/share
5343 export XDG_DATA_DIRS=/usr/local/share:/usr/share
5344 export MAILDIR="$HOME/mail"
5345 export CVS_RSH=ssh
5346 #export MATHMODELS=$HOME/src/eiffel/mathmodels
5347 #export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
5348 #export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
5349
5350 # Eiffel2Java stuff
5351 #export JAVA_HOME=/usr/lib/jvm/default
5352 #export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
5353 #export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
5354 #export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
5355
5356 #export PATH="$HOME/usr/build/pvs:$PATH"
5357 #export SBCLISP_HOME=/usr/share/sbcl-source
5358 #export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
5359
5360 export MOZ_USE_XINPUT2=1  # precise scrolling in firefox
5361
5362 #export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
5363 #export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
5364
5365 export NIXPKGS=$HOME/src/git/nixpkgs
5366
5367 if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer
5368 #+end_src
5369
5370 *** zshenv
5371 :PROPERTIES:
5372 :header-args+: :tangle ~/.zshenv
5373 :END:
5374
5375 #+begin_src sh
5376 # Ensure that a non-login, non-interactive shell has a defined environment.
5377 if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
5378   source "${ZDOTDIR:-$HOME}/.zprofile"
5379 fi
5380 #+end_src
5381
5382 *** zshrc
5383 :PROPERTIES:
5384 :header-args+: :tangle ~/.zshrc
5385 :END:
5386
5387 #+begin_src sh
5388 # Bash-like navigation
5389 #export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
5390 #export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
5391 export WORDCHARS='*?[]~=&;!#$%^(){}<>'
5392 #ZLE_SPACE_SUFFIX_CHARS=$'|&'
5393
5394 #disable -r time       # disable shell reserved word
5395 #alias time='time -p'  # -p for POSIX output
5396
5397 # rehash if last command was pacaur or pacman
5398 # (so that zsh picks up changes in $PATH immediately)
5399 TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
5400
5401 #
5402 # User configuration sourced by interactive shells
5403 #
5404
5405 # Change default zim location
5406 export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
5407
5408 # Start zim
5409 [[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
5410
5411 ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
5412 #ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
5413
5414 setopt globdots
5415
5416 source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
5417 # source ~/.zsh/zsh-autopair/autopair.zsh
5418
5419
5420 ### fzf ###
5421
5422 source /usr/share/fzf/key-bindings.zsh
5423 source /usr/share/fzf/completion.zsh
5424
5425 # Accept history selection instead of putting it on
5426 # the command line
5427 fzf-history-widget-accept() {
5428   fzf-history-widget
5429   zle accept-line
5430 }
5431 #zle     -N   fzf-history-widget-accept
5432 #bindkey '^R' fzf-history-widget-accept
5433
5434 # alt+c preview
5435 export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
5436
5437 ### fzf ###
5438
5439
5440 # aliases
5441 alias mpv="mpv --ytdl-format mp4"
5442 alias mv="mv -iv"
5443 alias cp="cp -iv"
5444 alias scl=systemctl
5445 alias jcl=journalctl
5446 alias m="mbsync -a"
5447 alias best="youtube-dl -f best"
5448 alias sd="ssh deb"
5449 alias sf="ssh fp"
5450 alias sn="ssh nix"
5451
5452 aur() {
5453    cd ~/usr/build
5454    git clone https://aur.archlinux.org/${1}.git
5455    cd ${1}
5456 }
5457
5458 # i-beam cursor
5459 echo -e "\033[5 q"
5460 #echo -e "\033[6 q"
5461 #+end_src
5462
5463 * Scripts
5464
5465 This section contains various useful scripts and the ones used by the
5466 programs above. For instance, =toggle-tablet= for switching to and
5467 from tablet mode on my X220T, =toggle-presentation-mode= for toggling
5468 Xfce's presentation mode which keeps the screen awake, and
5469 =rofi-light= a small utility that uses [[https://github.com/DaveDavenport/rofi][Rofi]] to ask and [[https://github.com/haikarainen/light][light]] to set an
5470 exact brightness value.
5471
5472 ** battery-percentage-time
5473 :PROPERTIES:
5474 :header-args+: :tangle ~/.local/bin/battery-percentage-time :shebang "#!/bin/sh"
5475 :END:
5476
5477 #+begin_src sh :tangle no
5478 dbus_send() {
5479         label=$1
5480         dbus-send --print-reply=literal --system \
5481                 --dest=org.freedesktop.UPower \
5482                 /org/freedesktop/UPower/devices/battery_BAT0 \
5483                 org.freedesktop.DBus.Properties.Get \
5484                 string:org.freedesktop.UPower.Device \
5485                 string:"${label}" | awk '{print $3}'
5486 }
5487
5488 perc=$(dbus_send 'Percentage')
5489 state=$(dbus_send 'State')
5490
5491 if [ "$state" -eq 2 ]; then  # Discharging
5492         secs=$(dbus_send 'TimeToEmpty')
5493 elif [ "$state" -eq 1 ]; then  # Charging
5494         secs=$(dbus_send 'TimeToFull')
5495 fi
5496
5497 printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60))
5498 #+end_src
5499
5500 ** my-i3status.py
5501 :PROPERTIES:
5502 :header-args+: :tangle ~/.local/bin/my-i3status.py :shebang "#!/usr/bin/env python2"
5503 :END:
5504
5505 #+begin_src python :comments none
5506 # -*- coding: utf-8 -*-
5507
5508 # This script is a simple wrapper which prefixes each i3status line with custom
5509 # information. It is based on:
5510 # https://github.com/i3/i3status/blob/master/contrib/wrapper.py
5511 #
5512 # In ~/.i3status.conf, add the following line:
5513 #     output_format = "i3bar"
5514 # in the 'general' section.
5515 # Then, in ~/.config/i3/config or ~/.config/sway/config add:
5516 #     status_command i3status | my-i3status.py
5517 # in the 'bar' section.  Make sure my-i3status.py is in $PATH.
5518 #
5519 # © 2012 Valentin Haenel <valentin.haenel@gmx.de>
5520 # © 2018 Amin Bandali <bandali@gnu.org>
5521 #
5522 # This program is free software. It comes without any warranty, to the extent
5523 # permitted by applicable law. You can redistribute it and/or modify it under
5524 # the terms of the Do What The Fuck You Want To Public License (WTFPL), Version
5525 # 2, as published by Sam Hocevar. See http://sam.zoy.org/wtfpl/COPYING for more
5526 # details.
5527
5528 import sys
5529 import json
5530 import os
5531
5532 def get_nosleep():
5533     """ Return true if ~/.nosleep exists. """
5534     return os.path.isfile(os.path.expanduser("~/.nosleep"))
5535
5536 def print_line(message):
5537     """ Non-buffered printing to stdout. """
5538     sys.stdout.write(message + '\n')
5539     sys.stdout.flush()
5540
5541 def read_line():
5542     """ Interrupted respecting reader for stdin. """
5543     # try reading a line, removing any extra whitespace
5544     try:
5545         line = sys.stdin.readline().strip()
5546         # i3status sends EOF, or an empty line
5547         if not line:
5548             sys.exit(3)
5549         return line
5550     # exit on ctrl-c
5551     except KeyboardInterrupt:
5552         sys.exit()
5553
5554 if __name__ == '__main__':
5555     # Skip the first line which contains the version header.
5556     print_line(read_line())
5557
5558     # The second line contains the start of the infinite array.
5559     print_line(read_line())
5560
5561     while True:
5562         line, prefix = read_line(), ''
5563         # ignore comma at start of lines
5564         if line.startswith(','):
5565             line, prefix = line[1:], ','
5566
5567         if get_nosleep():
5568             j = json.loads(line)
5569             # insert information into the start of the json, but could be anywhere
5570             j.insert(0, {'full_text' : '🖵 ', 'name' : 'nosleep'})
5571             # and echo back new encoded json
5572             print_line(prefix+json.dumps(j))
5573         else:
5574             print_line(prefix+line)
5575 #+end_src
5576
5577 ** rofi-light
5578 :PROPERTIES:
5579 :header-args+: :tangle ~/.local/bin/rofi-light :shebang "#!/bin/bash"
5580 :END:
5581
5582 #+begin_src bash
5583 cur=$(light -G)
5584 val=$(rofi -dmenu -mesg "light    $cur" -p "light -S " -l 0 -width 12)
5585 light -S $val
5586 #+end_src
5587
5588 ** s (run sway)
5589 :PROPERTIES:
5590 :header-args+: :tangle ~/.local/bin/s :shebang "#!/bin/bash"
5591 :END:
5592
5593 #+begin_src bash
5594 export _JAVA_AWT_WM_NONREPARENTING=1
5595 export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
5596 light -Nr 2
5597 source $HOME/.zprofile
5598 sway
5599 #+end_src
5600
5601 ** sway-ws-util
5602 :PROPERTIES:
5603 :header-args+: :tangle ~/.local/bin/sway-ws-util :shebang "#!/bin/bash"
5604 :END:
5605
5606 #+begin_src bash
5607 curr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name')
5608 [[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1))
5609 [[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1))
5610 dest_ws=-1
5611 op=-1
5612
5613 if [ "$1" = "switch" ] || [ "$1" = "move" ]; then
5614   op="$1"
5615   if [ "$2" = "prev" ]; then
5616     dest_ws="$prev_ws"
5617   elif [ "$2" = "next" ]; then
5618     dest_ws="$next_ws"
5619   else
5620     echo "Usage: $0 $1 {prev|next} [follow]"
5621     exit 1
5622   fi
5623 else
5624   echo "Usage: $0 {switch|move} {prev|next} [follow]"
5625   exit 1
5626 fi
5627
5628 if [ "$op" = "switch" ]; then
5629   sway workspace "$dest_ws"
5630 elif [ "$op" = "move" ]; then
5631   sway move container to workspace "$dest_ws"
5632   if [ "$3" = "follow" ]; then
5633     sway workspace "$dest_ws"
5634   fi
5635 fi
5636 #+end_src
5637
5638 ** toggle-layout
5639 :PROPERTIES:
5640 :header-args+: :tangle ~/.local/bin/toggle-layout :shebang "#!/bin/bash"
5641 :END:
5642
5643 #+begin_src bash :tangle no
5644 lang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
5645
5646 if [ "$lang" = "us" ]; then
5647     setxkbmap ir
5648 else
5649     setxkbmap us
5650     # xmodmap $HOME/.Xmodmap
5651 fi
5652 #+end_src
5653
5654 ** toggle-presentation-mode
5655 :PROPERTIES:
5656 :header-args+: :tangle ~/.local/bin/toggle-presentation-mode :shebang "#!/bin/bash"
5657 :END:
5658
5659 #+begin_src bash :tangle no
5660 xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -T
5661 #+end_src
5662
5663 ** toggle-tablet
5664 :PROPERTIES:
5665 :header-args+: :tangle ~/.local/bin/toggle-tablet :shebang "#!/bin/bash"
5666 :END:
5667
5668 This script toggles between a 'normal' mode and a 'tablet' mode, doing
5669 a few things:
5670
5671 - rotates the screen using =xrandr=, so that rotating the physical
5672   display of my X220t would have the laptop's battery on the right
5673   hand side,
5674 - enables touch screen,
5675 - properly rotates the stylus pen and touch screen pointers, and
5676 - toggles between RGB and Vertical BGR sub-pixel order.
5677
5678 #+begin_src bash :tangle no
5679 case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
5680     0)  # Screen is not rotated, we should rotate it right (90°)
5681            xrandr -o 3
5682            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
5683            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
5684            xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
5685            xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
5686            ;;
5687     1)  # Currently top is rotated right, we should set it normal (0°)
5688           xrandr -o 0
5689           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
5690           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
5691           xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
5692           xfconf-query -c xsettings -p /Xft/RGBA -s rgb
5693           ;;
5694     *)
5695            echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
5696            exit 1
5697            ;;
5698 esac
5699 #+end_src
5700
5701 ** unlock-def-gk.py
5702 :PROPERTIES:
5703 :header-args+: :tangle ~/.local/bin/unlock-def-gk.py :shebang "#!/usr/bin/env python2"
5704 :END:
5705
5706 #+begin_src python :tangle no
5707 import gnomekeyring as gk
5708 # list_item_ids_sync('login')[0] == 1L
5709 gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())
5710 #+end_src
5711
5712 ** volume-info
5713 :PROPERTIES:
5714 :header-args+: :tangle ~/.local/bin/volume-info :shebang "#!/bin/sh"
5715 :END:
5716
5717 #+begin_src sh :tangle no
5718 cur_vol=$(pamixer --get-volume)
5719
5720 if [ $(pamixer --get-mute) = true ]; then
5721   printf 'mt \n' "$cur_vol"
5722 else
5723   printf '%02d \n' "$cur_vol"
5724 fi
5725 #+end_src
5726
5727 ** wp
5728
5729 My little wallpaper changer script.
5730
5731 *** wp
5732 :PROPERTIES:
5733 :header-args+: :tangle ~/.local/bin/wp :shebang "#!/bin/bash"
5734 :END:
5735
5736 #+begin_src bash :tangle no
5737 export DISPLAY=:0
5738
5739 case "$1" in
5740   "day")
5741     feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5742     ;;
5743   "night")
5744     feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5745     ;;
5746   *)
5747     echo $"Usage: $0 {day|night}"
5748     exit 1
5749 esac
5750 #+end_src
5751
5752 *** wp-auto
5753 :PROPERTIES:
5754 :header-args+: :tangle ~/.local/bin/wp-auto :shebang "#!/bin/bash"
5755 :END:
5756
5757 #+begin_src bash :tangle no
5758 SED=$(which sed)
5759 ROFI=$(which rofi)
5760
5761 export DISPLAY=:0
5762 HOUR=$(date +%H)
5763
5764 if [ -z "${SED}" ]
5765 then
5766     echo "Did not find 'sed', script cannot continue."
5767     exit 1
5768 fi
5769 if [ -z "${ROFI}" ]
5770 then
5771     echo "Did not find rofi, there is no point to continue."
5772     exit 1
5773 fi
5774
5775 ###
5776 # Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
5777 # Repeated calls should leave the config clean-ish
5778 ###
5779 function set_theme()
5780 {
5781     CDIR="${HOME}/.config/rofi/"
5782     if [ ! -d "${CDIR}" ]
5783     then
5784         mkdir -p ${CDIR}
5785     fi
5786     if [ -f "${CDIR}/config" ]
5787     then
5788         ${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
5789     fi
5790     echo "rofi.theme: ${1}" >> "${CDIR}/config"
5791
5792 }
5793
5794 if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
5795     then
5796         feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
5797         xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
5798         set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
5799     else
5800         feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
5801         xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
5802         set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
5803 fi
5804 #+end_src
5805
5806 *** wp.service
5807 :PROPERTIES:
5808 :header-args+: :tangle ~/.config/systemd/user/wp.service
5809 :END:
5810
5811 #+begin_src conf :tangle no
5812 [Unit]
5813 Description=wallpaper service
5814
5815 [Service]
5816 Type=oneshot
5817 ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
5818 #+end_src
5819
5820 *** wp.timer
5821 :PROPERTIES:
5822 :header-args+: :tangle ~/.config/systemd/user/wp.timer
5823 :END:
5824
5825 #+begin_src conf :tangle no
5826 [Unit]
5827 [Unit]
5828 Description=wallpaper timer
5829
5830 [Timer]
5831 OnCalendar=07,21:00
5832 Unit=wp.service
5833 Persistent=true
5834
5835 [Install]
5836 WantedBy=timers.target
5837 #+end_src
5838
5839 ** zathura-sync.sh
5840 :PROPERTIES:
5841 :header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang "#!/bin/sh"
5842 :END:
5843
5844 #+begin_src sh
5845 pos="$1"
5846 pdffile="$2"
5847 zathura --synctex-forward "$pos" "$pdffile" || \
5848     (
5849     zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
5850     sleep 1; zathura --synctex-forward "$pos" "$pdffile" )
5851 #+end_src
5852 ** Fun :)
5853
5854 *** eat-em
5855 :PROPERTIES:
5856 :header-args+: :tangle ~/.local/bin/eat-em :shebang "#!/bin/sh"
5857 :END:
5858
5859 #+begin_src sh
5860 # Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5861 # [ESC] character in original post removed here.
5862
5863 # ANSI Color -- use these variables to easily have different color
5864 #    and format output. Make sure to output the reset sequence after
5865 #    colors (f = foreground, b = background), and use the 'off'
5866 #    feature for anything you turn on.
5867
5868 initializeANSI()
5869 {
5870  esc="$(echo -en '\e')"
5871
5872   blackf="${esc}[30m";   redf="${esc}[31m";    greenf="${esc}[32m"
5873   yellowf="${esc}[33m"   bluef="${esc}[34m";   purplef="${esc}[35m"
5874   cyanf="${esc}[36m";    whitef="${esc}[37m"
5875
5876   blackb="${esc}[40m";   redb="${esc}[41m";    greenb="${esc}[42m"
5877   yellowb="${esc}[43m"   blueb="${esc}[44m";   purpleb="${esc}[45m"
5878   cyanb="${esc}[46m";    whiteb="${esc}[47m"
5879
5880   boldon="${esc}[1m";    boldoff="${esc}[22m"
5881   italicson="${esc}[3m"; italicsoff="${esc}[23m"
5882   ulon="${esc}[4m";      uloff="${esc}[24m"
5883   invon="${esc}[7m";     invoff="${esc}[27m"
5884
5885   reset="${esc}[0m"
5886 }
5887
5888 # note in this first use that switching colors doesn't require a reset
5889 # first - the new color overrides the old one.
5890
5891 #clear
5892
5893 initializeANSI
5894
5895 cat << EOF
5896
5897  ${yellowf}  ▄███████▄${reset}   ${redf}  ▄██████▄${reset}    ${greenf}  ▄██████▄${reset}    ${bluef}  ▄██████▄${reset}    ${purplef}  ▄██████▄${reset}    ${cyanf}  ▄██████▄${reset}
5898  ${yellowf}▄█████████▀▀${reset}  ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset}  ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset}  ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset}  ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset}  ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5899  ${yellowf}███████▀${reset}      ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset}  ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset}  ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset}  ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset}  ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5900  ${yellowf}███████▄${reset}      ${redf}████████████${reset}  ${greenf}████████████${reset}  ${bluef}████████████${reset}  ${purplef}████████████${reset}  ${cyanf}████████████${reset}
5901  ${yellowf}▀█████████▄▄${reset}  ${redf}██▀██▀▀██▀██${reset}  ${greenf}██▀██▀▀██▀██${reset}  ${bluef}██▀██▀▀██▀██${reset}  ${purplef}██▀██▀▀██▀██${reset}  ${cyanf}██▀██▀▀██▀██${reset}
5902  ${yellowf}  ▀███████▀${reset}   ${redf}▀   ▀  ▀   ▀${reset}  ${greenf}▀   ▀  ▀   ▀${reset}  ${bluef}▀   ▀  ▀   ▀${reset}  ${purplef}▀   ▀  ▀   ▀${reset}  ${cyanf}▀   ▀  ▀   ▀${reset}
5903
5904  ${boldon}${yellowf}  ▄███████▄   ${redf}  ▄██████▄    ${greenf}  ▄██████▄    ${bluef}  ▄██████▄    ${purplef}  ▄██████▄    ${cyanf}  ▄██████▄${reset}
5905  ${boldon}${yellowf}▄█████████▀▀  ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄  ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄  ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄  ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄  ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
5906  ${boldon}${yellowf}███████▀      ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███  ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███  ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███  ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███  ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
5907  ${boldon}${yellowf}███████▄      ${redf}████████████  ${greenf}████████████  ${bluef}████████████  ${purplef}████████████  ${cyanf}████████████${reset}
5908  ${boldon}${yellowf}▀█████████▄▄  ${redf}██▀██▀▀██▀██  ${greenf}██▀██▀▀██▀██  ${bluef}██▀██▀▀██▀██  ${purplef}██▀██▀▀██▀██  ${cyanf}██▀██▀▀██▀██${reset}
5909  ${boldon}${yellowf}  ▀███████▀   ${redf}▀   ▀  ▀   ▀  ${greenf}▀   ▀  ▀   ▀  ${bluef}▀   ▀  ▀   ▀  ${purplef}▀   ▀  ▀   ▀  ${cyanf}▀   ▀  ▀   ▀${reset}
5910
5911 EOF
5912 #+end_src
5913
5914 *** invade-em
5915 :PROPERTIES:
5916 :header-args+: :tangle ~/.local/bin/invade-em :shebang "#!/bin/bash"
5917 :END:
5918
5919 #+begin_src bash
5920 #
5921 # ANSI color scheme script featuring Space Invaders
5922 #
5923 # Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
5924 # Modified by lolilolicon
5925 #
5926
5927 f=3 b=4
5928 for j in f b; do
5929   for i in {0..7}; do
5930     printf -v $j$i %b "\e[${!j}${i}m"
5931   done
5932 done
5933 bld=$'\e[1m'
5934 rst=$'\e[0m'
5935
5936 cat << EOF
5937
5938  $f1  ▀▄   ▄▀     $f2 ▄▄▄████▄▄▄    $f3  ▄██▄     $f4  ▀▄   ▄▀     $f5 ▄▄▄████▄▄▄    $f6  ▄██▄  $rst
5939  $f1 ▄█▀███▀█▄    $f2███▀▀██▀▀███   $f3▄█▀██▀█▄   $f4 ▄█▀███▀█▄    $f5███▀▀██▀▀███   $f6▄█▀██▀█▄$rst
5940  $f1█▀███████▀█   $f2▀▀███▀▀███▀▀   $f3▀█▀██▀█▀   $f4█▀███████▀█   $f5▀▀███▀▀███▀▀   $f6▀█▀██▀█▀$rst
5941  $f1▀ ▀▄▄ ▄▄▀ ▀   $f2 ▀█▄ ▀▀ ▄█▀    $f3▀▄    ▄▀   $f4▀ ▀▄▄ ▄▄▀ ▀   $f5 ▀█▄ ▀▀ ▄█▀    $f6▀▄    ▄▀$rst
5942
5943  $bld$f1▄ ▀▄   ▄▀ ▄   $f2 ▄▄▄████▄▄▄    $f3  ▄██▄     $f4▄ ▀▄   ▄▀ ▄   $f5 ▄▄▄████▄▄▄    $f6  ▄██▄  $rst
5944  $bld$f1█▄█▀███▀█▄█   $f2███▀▀██▀▀███   $f3▄█▀██▀█▄   $f4█▄█▀███▀█▄█   $f5███▀▀██▀▀███   $f6▄█▀██▀█▄$rst
5945  $bld$f1▀█████████▀   $f2▀▀▀██▀▀██▀▀▀   $f3▀▀█▀▀█▀▀   $f4▀█████████▀   $f5▀▀▀██▀▀██▀▀▀   $f6▀▀█▀▀█▀▀$rst
5946  $bld$f1 ▄▀     ▀▄    $f2▄▄▀▀ ▀▀ ▀▀▄▄   $f3▄▀▄▀▀▄▀▄   $f4 ▄▀     ▀▄    $f5▄▄▀▀ ▀▀ ▀▀▄▄   $f6▄▀▄▀▀▄▀▄$rst
5947
5948
5949                                      $f7▌$rst
5950
5951                                    $f7▌$rst
5952
5953                               $f7    ▄█▄    $rst
5954                               $f7▄█████████▄$rst
5955                               $f7▀▀▀▀▀▀▀▀▀▀▀$rst
5956
5957 EOF
5958 #+end_src